From f21e0e81d81b649ad309cedc7226f1bed72982e0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 24 May 2011 08:12:40 +0800 Subject: regulator: Do bulk enables of regulators in parallel In order to reduce the impact of ramp times rather than enabling the regulators for a device in series use async tasks to run the actual enables. This means that the delays which the enables implement can all run in parallel, though it does mean that the order in which the supplies come on may be unstable. For super bonus fun points if any of the regulators are shared between multiple supplies on the same device (as is rather likely) then this will test our locking. Note that in this case we only delay once for each physical regulator so the threads shouldn't block each other while delaying. It'd be even nicer if we could coalesce writes to a shared enable registers in PMICs but that's definitely future work, and it may also be useful and is certainly more achievable to optimise out the parallelism if none of the regulators implement ramp delays. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index d3e3879..7b38af9 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -2264,6 +2265,13 @@ err: } EXPORT_SYMBOL_GPL(regulator_bulk_get); +static void regulator_bulk_enable_async(void *data, async_cookie_t cookie) +{ + struct regulator_bulk_data *bulk = data; + + bulk->ret = regulator_enable(bulk->consumer); +} + /** * regulator_bulk_enable - enable multiple regulator consumers * @@ -2279,21 +2287,33 @@ EXPORT_SYMBOL_GPL(regulator_bulk_get); int regulator_bulk_enable(int num_consumers, struct regulator_bulk_data *consumers) { + LIST_HEAD(async_domain); int i; - int ret; + int ret = 0; + + for (i = 0; i < num_consumers; i++) + async_schedule_domain(regulator_bulk_enable_async, + &consumers[i], &async_domain); + + async_synchronize_full_domain(&async_domain); + /* If any consumer failed we need to unwind any that succeeded */ for (i = 0; i < num_consumers; i++) { - ret = regulator_enable(consumers[i].consumer); - if (ret != 0) + if (consumers[i].ret != 0) { + ret = consumers[i].ret; goto err; + } } return 0; err: - pr_err("Failed to enable %s: %d\n", consumers[i].supply, ret); - for (--i; i >= 0; --i) - regulator_disable(consumers[i].consumer); + for (i = 0; i < num_consumers; i++) + if (consumers[i].ret == 0) + regulator_disable(consumers[i].consumer); + else + pr_err("Failed to enable %s: %d\n", + consumers[i].supply, consumers[i].ret); return ret; } diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 9e87c1c..26f6ea4 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -122,6 +122,9 @@ struct regulator; struct regulator_bulk_data { const char *supply; struct regulator *consumer; + + /* Internal use */ + int ret; }; #if defined(CONFIG_REGULATOR) -- cgit v0.10.2 From 2ae3636b79aee1a69b2e84eff68bb123090796d3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 24 May 2011 23:14:40 +0800 Subject: regulator: Use _cansleep() for WM8994 regulator GPIOs The WM8994 regulator driver is perfectly happy if the GPIO used to enable the regulator sleeps so call the appropriate GPIO API. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c index 35b2958..1a6a690 100644 --- a/drivers/regulator/wm8994-regulator.c +++ b/drivers/regulator/wm8994-regulator.c @@ -43,7 +43,7 @@ static int wm8994_ldo_enable(struct regulator_dev *rdev) if (!ldo->enable) return 0; - gpio_set_value(ldo->enable, 1); + gpio_set_value_cansleep(ldo->enable, 1); ldo->is_enabled = true; return 0; @@ -57,7 +57,7 @@ static int wm8994_ldo_disable(struct regulator_dev *rdev) if (!ldo->enable) return -EINVAL; - gpio_set_value(ldo->enable, 0); + gpio_set_value_cansleep(ldo->enable, 0); ldo->is_enabled = false; return 0; -- cgit v0.10.2 From 7736f11dbadce33d3f12bf0e8114d0f1da5e8622 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Fri, 27 May 2011 12:25:27 -0700 Subject: regulator: twl-regulator: fix n_voltages for twl6030 variable LDOs The n_voltages initializer for the TWL6030_ADJUSTABLE_LDO macro is off by one, causing the the highest supported voltage to be unreachable. Setting the machine constraints to only allow the highest voltage causes errors: machine_constraints_voltage: VAUX3_6030: unsupportable voltage constraints twl_reg twl_reg.39: can't register VAUX3_6030, -22 twl_reg: probe of twl_reg.39 failed with error -22 This patch fixes the off by one error. Tested by setting VAUX3_6030 to 3.3V. Signed-off-by: Colin Cross Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 87fe0f7..503c2bc 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -864,7 +864,7 @@ static struct regulator_ops twlsmps_ops = { .desc = { \ .name = #label, \ .id = TWL6030_REG_##label, \ - .n_voltages = (max_mVolts - min_mVolts)/100, \ + .n_voltages = (max_mVolts - min_mVolts)/100 + 1, \ .ops = &twl6030ldo_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ -- cgit v0.10.2 From c3d4913cd4cd469cbf29d411293e937729e83f3a Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Tue, 31 May 2011 10:34:45 +0900 Subject: pch_dma: fix DMA issue(ch8-ch11) ISSUE: In case PCH_DMA with I2S communications with ch8~ch11, sometimes I2S data is not send correctly. CAUSE: The following patch I submitted before was not enough modification for supporting DMA ch8~ch11. The modification for status register of ch8~11 was not enough. pch_dma: Support I2S for ML7213 IOH author Tomoya MORINAGA Mon, 9 May 2011 07:09:38 +0000 (16:09 +0900) committer Vinod Koul Mon, 9 May 2011 11:42:23 +0000 (16:42 +0530) commit 194f5f2706c7472f9c6bb2d17fa788993606581f tree c9d4903ea02b18939a4f390956a48be1a3734517 parent 60092d0bde4c8741198da4a69b693d3709385bf1 This patch fixes the issue. We can confirm PCH_DMA with I2S communications with ch8~ch11 works well. Signed-off-by: Tomoya MORINAGA Signed-off-by: Vinod Koul diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index ff5b38f..65c32f8 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -45,7 +45,8 @@ #define DMA_STATUS_MASK_BITS 0x3 #define DMA_STATUS_SHIFT_BITS 16 #define DMA_STATUS_IRQ(x) (0x1 << (x)) -#define DMA_STATUS_ERR(x) (0x1 << ((x) + 8)) +#define DMA_STATUS0_ERR(x) (0x1 << ((x) + 8)) +#define DMA_STATUS2_ERR(x) (0x1 << (x)) #define DMA_DESC_WIDTH_SHIFT_BITS 12 #define DMA_DESC_WIDTH_1_BYTE (0x3 << DMA_DESC_WIDTH_SHIFT_BITS) @@ -133,6 +134,7 @@ struct pch_dma { #define PCH_DMA_CTL3 0x0C #define PCH_DMA_STS0 0x10 #define PCH_DMA_STS1 0x14 +#define PCH_DMA_STS2 0x18 #define dma_readl(pd, name) \ readl((pd)->membase + PCH_DMA_##name) @@ -183,13 +185,19 @@ static void pdc_enable_irq(struct dma_chan *chan, int enable) { struct pch_dma *pd = to_pd(chan->device); u32 val; + int pos; + + if (chan->chan_id < 8) + pos = chan->chan_id; + else + pos = chan->chan_id + 8; val = dma_readl(pd, CTL2); if (enable) - val |= 0x1 << chan->chan_id; + val |= 0x1 << pos; else - val &= ~(0x1 << chan->chan_id); + val &= ~(0x1 << pos); dma_writel(pd, CTL2, val); @@ -262,7 +270,7 @@ static void pdc_set_mode(struct dma_chan *chan, u32 mode) chan->chan_id, val); } -static u32 pdc_get_status(struct pch_dma_chan *pd_chan) +static u32 pdc_get_status0(struct pch_dma_chan *pd_chan) { struct pch_dma *pd = to_pd(pd_chan->chan.device); u32 val; @@ -272,9 +280,27 @@ static u32 pdc_get_status(struct pch_dma_chan *pd_chan) DMA_STATUS_BITS_PER_CH * pd_chan->chan.chan_id)); } +static u32 pdc_get_status2(struct pch_dma_chan *pd_chan) +{ + struct pch_dma *pd = to_pd(pd_chan->chan.device); + u32 val; + + val = dma_readl(pd, STS2); + return DMA_STATUS_MASK_BITS & (val >> (DMA_STATUS_SHIFT_BITS + + DMA_STATUS_BITS_PER_CH * (pd_chan->chan.chan_id - 8))); +} + static bool pdc_is_idle(struct pch_dma_chan *pd_chan) { - if (pdc_get_status(pd_chan) == DMA_STATUS_IDLE) + u32 sts; + + if (pd_chan->chan.chan_id < 8) + sts = pdc_get_status0(pd_chan); + else + sts = pdc_get_status2(pd_chan); + + + if (sts == DMA_STATUS_IDLE) return true; else return false; @@ -693,30 +719,45 @@ static irqreturn_t pd_irq(int irq, void *devid) struct pch_dma *pd = (struct pch_dma *)devid; struct pch_dma_chan *pd_chan; u32 sts0; + u32 sts2; int i; - int ret = IRQ_NONE; + int ret0 = IRQ_NONE; + int ret2 = IRQ_NONE; sts0 = dma_readl(pd, STS0); + sts2 = dma_readl(pd, STS2); dev_dbg(pd->dma.dev, "pd_irq sts0: %x\n", sts0); for (i = 0; i < pd->dma.chancnt; i++) { pd_chan = &pd->channels[i]; - if (sts0 & DMA_STATUS_IRQ(i)) { - if (sts0 & DMA_STATUS_ERR(i)) - set_bit(0, &pd_chan->err_status); + if (i < 8) { + if (sts0 & DMA_STATUS_IRQ(i)) { + if (sts0 & DMA_STATUS0_ERR(i)) + set_bit(0, &pd_chan->err_status); - tasklet_schedule(&pd_chan->tasklet); - ret = IRQ_HANDLED; - } + tasklet_schedule(&pd_chan->tasklet); + ret0 = IRQ_HANDLED; + } + } else { + if (sts2 & DMA_STATUS_IRQ(i - 8)) { + if (sts2 & DMA_STATUS2_ERR(i)) + set_bit(0, &pd_chan->err_status); + tasklet_schedule(&pd_chan->tasklet); + ret2 = IRQ_HANDLED; + } + } } /* clear interrupt bits in status register */ - dma_writel(pd, STS0, sts0); + if (ret0) + dma_writel(pd, STS0, sts0); + if (ret2) + dma_writel(pd, STS2, sts2); - return ret; + return ret0 | ret2; } #ifdef CONFIG_PM -- cgit v0.10.2 From badc1446891c158f065c5a9726febdae74eb5ac5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 1 Jun 2011 21:25:47 +0100 Subject: [IA64] Hook up gpiolib support Allow people to use gpiolib on ia64, mostly for build coverage as it seems more useful to standardise on availablity of the API than handle it being optional. Signed-off-by: Mark Brown Signed-off-by: Tony Luck diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 38280ef..578701e 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -27,6 +27,7 @@ config IA64 select GENERIC_PENDING_IRQ if SMP select IRQ_PER_CPU select GENERIC_IRQ_SHOW + select ARCH_WANT_OPTIONAL_GPIOLIB default y help The Itanium Processor Family is Intel's 64-bit successor to @@ -89,6 +90,9 @@ config GENERIC_TIME_VSYSCALL config HAVE_SETUP_PER_CPU_AREA def_bool y +config GENERIC_GPIO + def_bool y + config DMI bool default y diff --git a/arch/ia64/include/asm/gpio.h b/arch/ia64/include/asm/gpio.h new file mode 100644 index 0000000..590a20d --- /dev/null +++ b/arch/ia64/include/asm/gpio.h @@ -0,0 +1,55 @@ +/* + * Generic GPIO API implementation for IA-64. + * + * A stright copy of that for PowerPC which was: + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _ASM_IA64_GPIO_H +#define _ASM_IA64_GPIO_H + +#include +#include + +#ifdef CONFIG_GPIOLIB + +/* + * We don't (yet) implement inlined/rapid versions for on-chip gpios. + * Just call gpiolib. + */ +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned int gpio) +{ + return __gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* _ASM_IA64_GPIO_H */ -- cgit v0.10.2 From 9f14517bd6f38cf4b48d742a0ac5db9d17edecba Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 1 Jun 2011 00:32:50 -0700 Subject: clocksource: tile: convert to use clocksource_register_hz Convert tile to use clocksource_register_hz. CC: Thomas Gleixner Signed-off-by: John Stultz Signed-off-by: Chris Metcalf diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c index c4be58c..f6f50f2a 100644 --- a/arch/tile/kernel/time.c +++ b/arch/tile/kernel/time.c @@ -78,7 +78,6 @@ static struct clocksource cycle_counter_cs = { .rating = 300, .read = clocksource_get_cycles, .mask = CLOCKSOURCE_MASK(64), - .shift = 22, /* typical value, e.g. x86 tsc uses this */ .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -91,8 +90,6 @@ void __init setup_clock(void) cycles_per_sec = hv_sysconf(HV_SYSCONF_CPU_SPEED); sched_clock_mult = clocksource_hz2mult(cycles_per_sec, SCHED_CLOCK_SHIFT); - cycle_counter_cs.mult = - clocksource_hz2mult(cycles_per_sec, cycle_counter_cs.shift); } void __init calibrate_delay(void) @@ -107,7 +104,7 @@ void __init calibrate_delay(void) void __init time_init(void) { /* Initialize and register the clock source. */ - clocksource_register(&cycle_counter_cs); + clocksource_register_hz(&cycle_counter_cs, cycles_per_sec); /* Start up the tile-timer interrupt source on the boot cpu. */ setup_tile_timer(); -- cgit v0.10.2 From 2c007a9d8cb018a3ce2106342f2aff2abca2a3bd Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 3 Jun 2011 17:36:18 -0400 Subject: tile: use generic-y format for one-line asm-generic headers This lets us remove a lot of one-line wrapper header files. See commit d8ecc5cd8e227bc318513b5306ae88a474b8886d for context. Signed-off-by: Chris Metcalf diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild index 849ab2f..aec60dc 100644 --- a/arch/tile/include/asm/Kbuild +++ b/arch/tile/include/asm/Kbuild @@ -2,3 +2,41 @@ include include/asm-generic/Kbuild.asm header-y += ucontext.h header-y += hardwall.h + +generic-y += bug.h +generic-y += bugs.h +generic-y += cputime.h +generic-y += device.h +generic-y += div64.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += fb.h +generic-y += fcntl.h +generic-y += ioctl.h +generic-y += ioctls.h +generic-y += ipc.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += local.h +generic-y += module.h +generic-y += msgbuf.h +generic-y += mutex.h +generic-y += param.h +generic-y += parport.h +generic-y += poll.h +generic-y += posix_types.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += sembuf.h +generic-y += serial.h +generic-y += shmbuf.h +generic-y += shmparam.h +generic-y += socket.h +generic-y += sockios.h +generic-y += statfs.h +generic-y += termbits.h +generic-y += termios.h +generic-y += types.h +generic-y += ucontext.h +generic-y += xor.h diff --git a/arch/tile/include/asm/bug.h b/arch/tile/include/asm/bug.h deleted file mode 100644 index b12fd89..0000000 --- a/arch/tile/include/asm/bug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/bugs.h b/arch/tile/include/asm/bugs.h deleted file mode 100644 index 61791e1..0000000 --- a/arch/tile/include/asm/bugs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/cputime.h b/arch/tile/include/asm/cputime.h deleted file mode 100644 index 6d68ad7..0000000 --- a/arch/tile/include/asm/cputime.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/device.h b/arch/tile/include/asm/device.h deleted file mode 100644 index f0a4c25..0000000 --- a/arch/tile/include/asm/device.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/div64.h b/arch/tile/include/asm/div64.h deleted file mode 100644 index 6cd978c..0000000 --- a/arch/tile/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/emergency-restart.h b/arch/tile/include/asm/emergency-restart.h deleted file mode 100644 index 3711bd9..0000000 --- a/arch/tile/include/asm/emergency-restart.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/errno.h b/arch/tile/include/asm/errno.h deleted file mode 100644 index 4c82b50..0000000 --- a/arch/tile/include/asm/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/fb.h b/arch/tile/include/asm/fb.h deleted file mode 100644 index 3a4988e..0000000 --- a/arch/tile/include/asm/fb.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/fcntl.h b/arch/tile/include/asm/fcntl.h deleted file mode 100644 index 46ab12d..0000000 --- a/arch/tile/include/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/ioctl.h b/arch/tile/include/asm/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/arch/tile/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/ioctls.h b/arch/tile/include/asm/ioctls.h deleted file mode 100644 index ec34c76..0000000 --- a/arch/tile/include/asm/ioctls.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/ipc.h b/arch/tile/include/asm/ipc.h deleted file mode 100644 index a46e3d9..0000000 --- a/arch/tile/include/asm/ipc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/ipcbuf.h b/arch/tile/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51..0000000 --- a/arch/tile/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/irq_regs.h b/arch/tile/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b..0000000 --- a/arch/tile/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/kdebug.h b/arch/tile/include/asm/kdebug.h deleted file mode 100644 index 6ece1b0..0000000 --- a/arch/tile/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/local.h b/arch/tile/include/asm/local.h deleted file mode 100644 index c11c530..0000000 --- a/arch/tile/include/asm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/module.h b/arch/tile/include/asm/module.h deleted file mode 100644 index 1e4b79f..0000000 --- a/arch/tile/include/asm/module.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/msgbuf.h b/arch/tile/include/asm/msgbuf.h deleted file mode 100644 index 809134c..0000000 --- a/arch/tile/include/asm/msgbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/mutex.h b/arch/tile/include/asm/mutex.h deleted file mode 100644 index ff6101a..0000000 --- a/arch/tile/include/asm/mutex.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/param.h b/arch/tile/include/asm/param.h deleted file mode 100644 index 965d454..0000000 --- a/arch/tile/include/asm/param.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/parport.h b/arch/tile/include/asm/parport.h deleted file mode 100644 index cf252af..0000000 --- a/arch/tile/include/asm/parport.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/poll.h b/arch/tile/include/asm/poll.h deleted file mode 100644 index c98509d..0000000 --- a/arch/tile/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/posix_types.h b/arch/tile/include/asm/posix_types.h deleted file mode 100644 index 22cae62..0000000 --- a/arch/tile/include/asm/posix_types.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/resource.h b/arch/tile/include/asm/resource.h deleted file mode 100644 index 04bc4db..0000000 --- a/arch/tile/include/asm/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/scatterlist.h b/arch/tile/include/asm/scatterlist.h deleted file mode 100644 index 35d786f..0000000 --- a/arch/tile/include/asm/scatterlist.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/sembuf.h b/arch/tile/include/asm/sembuf.h deleted file mode 100644 index 7673b83..0000000 --- a/arch/tile/include/asm/sembuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/serial.h b/arch/tile/include/asm/serial.h deleted file mode 100644 index a0cb0ca..0000000 --- a/arch/tile/include/asm/serial.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/shmbuf.h b/arch/tile/include/asm/shmbuf.h deleted file mode 100644 index 83c05fc..0000000 --- a/arch/tile/include/asm/shmbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/shmparam.h b/arch/tile/include/asm/shmparam.h deleted file mode 100644 index 93f30de..0000000 --- a/arch/tile/include/asm/shmparam.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/socket.h b/arch/tile/include/asm/socket.h deleted file mode 100644 index 6b71384..0000000 --- a/arch/tile/include/asm/socket.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/sockios.h b/arch/tile/include/asm/sockios.h deleted file mode 100644 index def6d47..0000000 --- a/arch/tile/include/asm/sockios.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/statfs.h b/arch/tile/include/asm/statfs.h deleted file mode 100644 index 0b91fe1..0000000 --- a/arch/tile/include/asm/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/termbits.h b/arch/tile/include/asm/termbits.h deleted file mode 100644 index 3935b10..0000000 --- a/arch/tile/include/asm/termbits.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/termios.h b/arch/tile/include/asm/termios.h deleted file mode 100644 index 280d78a..0000000 --- a/arch/tile/include/asm/termios.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/types.h b/arch/tile/include/asm/types.h deleted file mode 100644 index b9e79bc..0000000 --- a/arch/tile/include/asm/types.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/ucontext.h b/arch/tile/include/asm/ucontext.h deleted file mode 100644 index 9bc07b9..0000000 --- a/arch/tile/include/asm/ucontext.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/tile/include/asm/xor.h b/arch/tile/include/asm/xor.h deleted file mode 100644 index c82eb12..0000000 --- a/arch/tile/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v0.10.2 From ab7cfb5548d22604fafeaaa95950be2f97869f1e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 1 Jun 2011 14:47:42 +0900 Subject: serial: sh-sci: Kill off bitrotted H8/300 support. h8300 has never been updated upstream to support the conversion to the driver model (which happened mid-2.5), and it doesn't seem likely that it ever will. Kill off the remaining bitrotted support to reduce the maintenance burden going forward. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 636144c..1c0cd2d 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -974,7 +974,7 @@ config SERIAL_IP22_ZILOG_CONSOLE config SERIAL_SH_SCI tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) + depends on HAVE_CLK && (SUPERH || ARCH_SHMOBILE) select SERIAL_CORE config SERIAL_SH_SCI_NR_UARTS diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index ebd8629..280c02a 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -54,10 +54,6 @@ #include #endif -#ifdef CONFIG_H8300 -#include -#endif - #include "sh-sci.h" struct sci_port { @@ -164,23 +160,7 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ -#if defined(__H8300H__) || defined(__H8300S__) -static void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - int ch = (port->mapbase - SMR0) >> 3; - - /* set DDR regs */ - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].rx, - H8300_GPIO_INPUT); - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].tx, - H8300_GPIO_OUTPUT); - - /* tx mark output*/ - H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) { if (port->mapbase == 0xA4400000) { @@ -1863,14 +1843,8 @@ static int __devinit serial_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - ret = uart_set_options(port, co, baud, parity, bits, flow); -#if defined(__H8300H__) || defined(__H8300S__) - /* disable rx interrupt */ - if (ret == 0) - sci_stop_rx(port); -#endif /* TODO: disable clock */ - return ret; + return uart_set_options(port, co, baud, parity, bits, flow); } static struct console serial_console = { diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index b04d937..4dc249e 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -2,13 +2,6 @@ #include #include -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) -#include -#endif -#if defined(CONFIG_H8S2678) -#include -#endif - #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7708) || \ @@ -72,10 +65,6 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_H83007) || defined(CONFIG_H83068) -# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) -#elif defined(CONFIG_H8S2678) -# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_CPU_SUBTYPE_SH7757) # define SCSPTR0 0xfe4b0020 # define SCIF_ORER 0x0001 @@ -223,17 +212,6 @@ } \ } -#ifdef CONFIG_H8300 -/* h8300 don't have SCIF */ -#define CPU_SCIF_FNS(name) \ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - return 0; \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - } -#else #define CPU_SCIF_FNS(name, scif_offset, scif_size) \ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ @@ -243,7 +221,6 @@ { \ SCI_OUT(scif_size, scif_offset, value); \ } -#endif #define CPU_SCI_FNS(name, sci_offset, sci_size) \ static inline unsigned int sci_##name##_in(struct uart_port* port) \ @@ -262,8 +239,7 @@ defined(CONFIG_ARCH_SH7372) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) @@ -282,19 +258,11 @@ CPU_SCIF_FNS(name, scif_offset, scif_size) #else #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) #endif -#elif defined(__H8300H__) || defined(__H8300S__) -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ @@ -303,8 +271,7 @@ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #else #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) @@ -353,14 +320,14 @@ SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCLSR, 0x24, 16) #else -/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ -/* name off sz off sz off sz off sz off sz*/ -SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8) -SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8) -SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8) -SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8) -SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) -SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) +/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 */ +/* name off sz off sz off sz off sz */ +SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16) +SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8) +SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16) +SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8) +SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16) +SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ @@ -390,48 +357,6 @@ SCIF_FNS(SCLSR, 0, 0, 0x24, 16) #define sci_in(port, reg) sci_##reg##_in(port) #define sci_out(port, reg, value) sci_##reg##_out(port, value) -/* H8/300 series SCI pins assignment */ -#if defined(__H8300H__) || defined(__H8300S__) -static const struct __attribute__((packed)) { - int port; /* GPIO port no */ - unsigned short rx,tx; /* GPIO bit no */ -} h8300_sci_pins[] = { -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) - { /* SCI0 */ - .port = H8300_GPIO_P9, - .rx = H8300_GPIO_B2, - .tx = H8300_GPIO_B0, - }, - { /* SCI1 */ - .port = H8300_GPIO_P9, - .rx = H8300_GPIO_B3, - .tx = H8300_GPIO_B1, - }, - { /* SCI2 */ - .port = H8300_GPIO_PB, - .rx = H8300_GPIO_B7, - .tx = H8300_GPIO_B6, - } -#elif defined(CONFIG_H8S2678) - { /* SCI0 */ - .port = H8300_GPIO_P3, - .rx = H8300_GPIO_B2, - .tx = H8300_GPIO_B0, - }, - { /* SCI1 */ - .port = H8300_GPIO_P3, - .rx = H8300_GPIO_B3, - .tx = H8300_GPIO_B1, - }, - { /* SCI2 */ - .port = H8300_GPIO_P5, - .rx = H8300_GPIO_B1, - .tx = H8300_GPIO_B0, - } -#endif -}; -#endif - #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7708) || \ @@ -454,12 +379,6 @@ static inline int sci_rxd_in(struct uart_port *port) return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ return 1; } -#elif defined(__H8300H__) || defined(__H8300S__) -static inline int sci_rxd_in(struct uart_port *port) -{ - int ch = (port->mapbase - SMR0) >> 3; - return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; -} #else /* default case for non-SCI processors */ static inline int sci_rxd_in(struct uart_port *port) { -- cgit v0.10.2 From 5fa29a17fabfe204fa9f20edd5fc81ab2364eb4b Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:02 +0300 Subject: dmaengine: add ep93xx DMA support The ep93xx DMA controller has 10 independent memory to peripheral (M2P) channels, and 2 dedicated memory to memory (M2M) channels. M2M channels can also be used by SPI and IDE to perform DMA transfers to/from their memory mapped FIFOs. This driver supports both M2P and M2M channels with DMA_SLAVE, DMA_CYCLIC and DMA_MEMCPY (M2M only) capabilities. Signed-off-by: Mika Westerberg Signed-off-by: Ryan Mallon Acked-by: H Hartley Sweeten Acked-by: Vinod Koul Cc: Dan Williams Signed-off-by: Vinod Koul diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 5e31b2b..6e7049a 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -15,6 +15,8 @@ #include #include +#include +#include /** * struct ep93xx_dma_buffer - Information about a buffer to be transferred @@ -146,4 +148,89 @@ void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, */ void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); +/* + * M2P channels. + * + * Note that these values are also directly used for setting the PPALLOC + * register. + */ +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 + +/** + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. + */ +struct ep93xx_dma_data { + int port; + enum dma_data_direction direction; + const char *name; +}; + +/** + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel + */ +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; + +/** + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array + * + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. + */ +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; + +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} + +/** + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel + * + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. + */ +static inline enum dma_data_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; + + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; +} + #endif /* __ASM_ARCH_DMA_H */ diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 25cf327..2e3b3d3 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -237,6 +237,13 @@ config MXS_DMA Support the MXS DMA engine. This engine including APBH-DMA and APBX-DMA is integrated into Freescale i.MX23/28 chips. +config EP93XX_DMA + bool "Cirrus Logic EP93xx DMA support" + depends on ARCH_EP93XX + select DMA_ENGINE + help + Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 836095a..30cf3b1 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o +obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c new file mode 100644 index 0000000..0766c1e --- /dev/null +++ b/drivers/dma/ep93xx_dma.c @@ -0,0 +1,1355 @@ +/* + * Driver for the Cirrus Logic EP93xx DMA Controller + * + * Copyright (C) 2011 Mika Westerberg + * + * DMA M2P implementation is based on the original + * arch/arm/mach-ep93xx/dma-m2p.c which has following copyrights: + * + * Copyright (C) 2006 Lennert Buytenhek + * Copyright (C) 2006 Applied Data Systems + * Copyright (C) 2009 Ryan Mallon + * + * This driver is based on dw_dmac and amba-pl08x drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include + +/* M2P registers */ +#define M2P_CONTROL 0x0000 +#define M2P_CONTROL_STALLINT BIT(0) +#define M2P_CONTROL_NFBINT BIT(1) +#define M2P_CONTROL_CH_ERROR_INT BIT(3) +#define M2P_CONTROL_ENABLE BIT(4) +#define M2P_CONTROL_ICE BIT(6) + +#define M2P_INTERRUPT 0x0004 +#define M2P_INTERRUPT_STALL BIT(0) +#define M2P_INTERRUPT_NFB BIT(1) +#define M2P_INTERRUPT_ERROR BIT(3) + +#define M2P_PPALLOC 0x0008 +#define M2P_STATUS 0x000c + +#define M2P_MAXCNT0 0x0020 +#define M2P_BASE0 0x0024 +#define M2P_MAXCNT1 0x0030 +#define M2P_BASE1 0x0034 + +#define M2P_STATE_IDLE 0 +#define M2P_STATE_STALL 1 +#define M2P_STATE_ON 2 +#define M2P_STATE_NEXT 3 + +/* M2M registers */ +#define M2M_CONTROL 0x0000 +#define M2M_CONTROL_DONEINT BIT(2) +#define M2M_CONTROL_ENABLE BIT(3) +#define M2M_CONTROL_START BIT(4) +#define M2M_CONTROL_DAH BIT(11) +#define M2M_CONTROL_SAH BIT(12) +#define M2M_CONTROL_PW_SHIFT 9 +#define M2M_CONTROL_PW_8 (0 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_16 (1 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_32 (2 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_MASK (3 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_TM_SHIFT 13 +#define M2M_CONTROL_TM_TX (1 << M2M_CONTROL_TM_SHIFT) +#define M2M_CONTROL_TM_RX (2 << M2M_CONTROL_TM_SHIFT) +#define M2M_CONTROL_RSS_SHIFT 22 +#define M2M_CONTROL_RSS_SSPRX (1 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_RSS_SSPTX (2 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_RSS_IDE (3 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_NO_HDSK BIT(24) +#define M2M_CONTROL_PWSC_SHIFT 25 + +#define M2M_INTERRUPT 0x0004 +#define M2M_INTERRUPT_DONEINT BIT(1) + +#define M2M_BCR0 0x0010 +#define M2M_BCR1 0x0014 +#define M2M_SAR_BASE0 0x0018 +#define M2M_SAR_BASE1 0x001c +#define M2M_DAR_BASE0 0x002c +#define M2M_DAR_BASE1 0x0030 + +#define DMA_MAX_CHAN_BYTES 0xffff +#define DMA_MAX_CHAN_DESCRIPTORS 32 + +struct ep93xx_dma_engine; + +/** + * struct ep93xx_dma_desc - EP93xx specific transaction descriptor + * @src_addr: source address of the transaction + * @dst_addr: destination address of the transaction + * @size: size of the transaction (in bytes) + * @complete: this descriptor is completed + * @txd: dmaengine API descriptor + * @tx_list: list of linked descriptors + * @node: link used for putting this into a channel queue + */ +struct ep93xx_dma_desc { + u32 src_addr; + u32 dst_addr; + size_t size; + bool complete; + struct dma_async_tx_descriptor txd; + struct list_head tx_list; + struct list_head node; +}; + +/** + * struct ep93xx_dma_chan - an EP93xx DMA M2P/M2M channel + * @chan: dmaengine API channel + * @edma: pointer to to the engine device + * @regs: memory mapped registers + * @irq: interrupt number of the channel + * @clk: clock used by this channel + * @tasklet: channel specific tasklet used for callbacks + * @lock: lock protecting the fields following + * @flags: flags for the channel + * @buffer: which buffer to use next (0/1) + * @last_completed: last completed cookie value + * @active: flattened chain of descriptors currently being processed + * @queue: pending descriptors which are handled next + * @free_list: list of free descriptors which can be used + * @runtime_addr: physical address currently used as dest/src (M2M only). This + * is set via %DMA_SLAVE_CONFIG before slave operation is + * prepared + * @runtime_ctrl: M2M runtime values for the control register. + * + * As EP93xx DMA controller doesn't support real chained DMA descriptors we + * will have slightly different scheme here: @active points to a head of + * flattened DMA descriptor chain. + * + * @queue holds pending transactions. These are linked through the first + * descriptor in the chain. When a descriptor is moved to the @active queue, + * the first and chained descriptors are flattened into a single list. + * + * @chan.private holds pointer to &struct ep93xx_dma_data which contains + * necessary channel configuration information. For memcpy channels this must + * be %NULL. + */ +struct ep93xx_dma_chan { + struct dma_chan chan; + const struct ep93xx_dma_engine *edma; + void __iomem *regs; + int irq; + struct clk *clk; + struct tasklet_struct tasklet; + /* protects the fields following */ + spinlock_t lock; + unsigned long flags; +/* Channel is configured for cyclic transfers */ +#define EP93XX_DMA_IS_CYCLIC 0 + + int buffer; + dma_cookie_t last_completed; + struct list_head active; + struct list_head queue; + struct list_head free_list; + u32 runtime_addr; + u32 runtime_ctrl; +}; + +/** + * struct ep93xx_dma_engine - the EP93xx DMA engine instance + * @dma_dev: holds the dmaengine device + * @m2m: is this an M2M or M2P device + * @hw_setup: method which sets the channel up for operation + * @hw_shutdown: shuts the channel down and flushes whatever is left + * @hw_submit: pushes active descriptor(s) to the hardware + * @hw_interrupt: handle the interrupt + * @num_channels: number of channels for this instance + * @channels: array of channels + * + * There is one instance of this struct for the M2P channels and one for the + * M2M channels. hw_xxx() methods are used to perform operations which are + * different on M2M and M2P channels. These methods are called with channel + * lock held and interrupts disabled so they cannot sleep. + */ +struct ep93xx_dma_engine { + struct dma_device dma_dev; + bool m2m; + int (*hw_setup)(struct ep93xx_dma_chan *); + void (*hw_shutdown)(struct ep93xx_dma_chan *); + void (*hw_submit)(struct ep93xx_dma_chan *); + int (*hw_interrupt)(struct ep93xx_dma_chan *); +#define INTERRUPT_UNKNOWN 0 +#define INTERRUPT_DONE 1 +#define INTERRUPT_NEXT_BUFFER 2 + + size_t num_channels; + struct ep93xx_dma_chan channels[]; +}; + +static inline struct device *chan2dev(struct ep93xx_dma_chan *edmac) +{ + return &edmac->chan.dev->device; +} + +static struct ep93xx_dma_chan *to_ep93xx_dma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct ep93xx_dma_chan, chan); +} + +/** + * ep93xx_dma_set_active - set new active descriptor chain + * @edmac: channel + * @desc: head of the new active descriptor chain + * + * Sets @desc to be the head of the new active descriptor chain. This is the + * chain which is processed next. The active list must be empty before calling + * this function. + * + * Called with @edmac->lock held and interrupts disabled. + */ +static void ep93xx_dma_set_active(struct ep93xx_dma_chan *edmac, + struct ep93xx_dma_desc *desc) +{ + BUG_ON(!list_empty(&edmac->active)); + + list_add_tail(&desc->node, &edmac->active); + + /* Flatten the @desc->tx_list chain into @edmac->active list */ + while (!list_empty(&desc->tx_list)) { + struct ep93xx_dma_desc *d = list_first_entry(&desc->tx_list, + struct ep93xx_dma_desc, node); + + /* + * We copy the callback parameters from the first descriptor + * to all the chained descriptors. This way we can call the + * callback without having to find out the first descriptor in + * the chain. Useful for cyclic transfers. + */ + d->txd.callback = desc->txd.callback; + d->txd.callback_param = desc->txd.callback_param; + + list_move_tail(&d->node, &edmac->active); + } +} + +/* Called with @edmac->lock held and interrupts disabled */ +static struct ep93xx_dma_desc * +ep93xx_dma_get_active(struct ep93xx_dma_chan *edmac) +{ + return list_first_entry(&edmac->active, struct ep93xx_dma_desc, node); +} + +/** + * ep93xx_dma_advance_active - advances to the next active descriptor + * @edmac: channel + * + * Function advances active descriptor to the next in the @edmac->active and + * returns %true if we still have descriptors in the chain to process. + * Otherwise returns %false. + * + * When the channel is in cyclic mode always returns %true. + * + * Called with @edmac->lock held and interrupts disabled. + */ +static bool ep93xx_dma_advance_active(struct ep93xx_dma_chan *edmac) +{ + list_rotate_left(&edmac->active); + + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) + return true; + + /* + * If txd.cookie is set it means that we are back in the first + * descriptor in the chain and hence done with it. + */ + return !ep93xx_dma_get_active(edmac)->txd.cookie; +} + +/* + * M2P DMA implementation + */ + +static void m2p_set_control(struct ep93xx_dma_chan *edmac, u32 control) +{ + writel(control, edmac->regs + M2P_CONTROL); + /* + * EP93xx User's Guide states that we must perform a dummy read after + * write to the control register. + */ + readl(edmac->regs + M2P_CONTROL); +} + +static int m2p_hw_setup(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_data *data = edmac->chan.private; + u32 control; + + writel(data->port & 0xf, edmac->regs + M2P_PPALLOC); + + control = M2P_CONTROL_CH_ERROR_INT | M2P_CONTROL_ICE + | M2P_CONTROL_ENABLE; + m2p_set_control(edmac, control); + + return 0; +} + +static inline u32 m2p_channel_state(struct ep93xx_dma_chan *edmac) +{ + return (readl(edmac->regs + M2P_STATUS) >> 4) & 0x3; +} + +static void m2p_hw_shutdown(struct ep93xx_dma_chan *edmac) +{ + u32 control; + + control = readl(edmac->regs + M2P_CONTROL); + control &= ~(M2P_CONTROL_STALLINT | M2P_CONTROL_NFBINT); + m2p_set_control(edmac, control); + + while (m2p_channel_state(edmac) >= M2P_STATE_ON) + cpu_relax(); + + m2p_set_control(edmac, 0); + + while (m2p_channel_state(edmac) == M2P_STATE_STALL) + cpu_relax(); +} + +static void m2p_fill_desc(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + u32 bus_addr; + + if (ep93xx_dma_chan_direction(&edmac->chan) == DMA_TO_DEVICE) + bus_addr = desc->src_addr; + else + bus_addr = desc->dst_addr; + + if (edmac->buffer == 0) { + writel(desc->size, edmac->regs + M2P_MAXCNT0); + writel(bus_addr, edmac->regs + M2P_BASE0); + } else { + writel(desc->size, edmac->regs + M2P_MAXCNT1); + writel(bus_addr, edmac->regs + M2P_BASE1); + } + + edmac->buffer ^= 1; +} + +static void m2p_hw_submit(struct ep93xx_dma_chan *edmac) +{ + u32 control = readl(edmac->regs + M2P_CONTROL); + + m2p_fill_desc(edmac); + control |= M2P_CONTROL_STALLINT; + + if (ep93xx_dma_advance_active(edmac)) { + m2p_fill_desc(edmac); + control |= M2P_CONTROL_NFBINT; + } + + m2p_set_control(edmac, control); +} + +static int m2p_hw_interrupt(struct ep93xx_dma_chan *edmac) +{ + u32 irq_status = readl(edmac->regs + M2P_INTERRUPT); + u32 control; + + if (irq_status & M2P_INTERRUPT_ERROR) { + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + + /* Clear the error interrupt */ + writel(1, edmac->regs + M2P_INTERRUPT); + + /* + * It seems that there is no easy way of reporting errors back + * to client so we just report the error here and continue as + * usual. + * + * Revisit this when there is a mechanism to report back the + * errors. + */ + dev_err(chan2dev(edmac), + "DMA transfer failed! Details:\n" + "\tcookie : %d\n" + "\tsrc_addr : 0x%08x\n" + "\tdst_addr : 0x%08x\n" + "\tsize : %zu\n", + desc->txd.cookie, desc->src_addr, desc->dst_addr, + desc->size); + } + + switch (irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) { + case M2P_INTERRUPT_STALL: + /* Disable interrupts */ + control = readl(edmac->regs + M2P_CONTROL); + control &= ~(M2P_CONTROL_STALLINT | M2P_CONTROL_NFBINT); + m2p_set_control(edmac, control); + + return INTERRUPT_DONE; + + case M2P_INTERRUPT_NFB: + if (ep93xx_dma_advance_active(edmac)) + m2p_fill_desc(edmac); + + return INTERRUPT_NEXT_BUFFER; + } + + return INTERRUPT_UNKNOWN; +} + +/* + * M2M DMA implementation + * + * For the M2M transfers we don't use NFB at all. This is because it simply + * doesn't work well with memcpy transfers. When you submit both buffers it is + * extremely unlikely that you get an NFB interrupt, but it instead reports + * DONE interrupt and both buffers are already transferred which means that we + * weren't able to update the next buffer. + * + * So for now we "simulate" NFB by just submitting buffer after buffer + * without double buffering. + */ + +static int m2m_hw_setup(struct ep93xx_dma_chan *edmac) +{ + const struct ep93xx_dma_data *data = edmac->chan.private; + u32 control = 0; + + if (!data) { + /* This is memcpy channel, nothing to configure */ + writel(control, edmac->regs + M2M_CONTROL); + return 0; + } + + switch (data->port) { + case EP93XX_DMA_SSP: + /* + * This was found via experimenting - anything less than 5 + * causes the channel to perform only a partial transfer which + * leads to problems since we don't get DONE interrupt then. + */ + control = (5 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_NO_HDSK; + + if (data->direction == DMA_TO_DEVICE) { + control |= M2M_CONTROL_DAH; + control |= M2M_CONTROL_TM_TX; + control |= M2M_CONTROL_RSS_SSPTX; + } else { + control |= M2M_CONTROL_SAH; + control |= M2M_CONTROL_TM_RX; + control |= M2M_CONTROL_RSS_SSPRX; + } + break; + + case EP93XX_DMA_IDE: + /* + * This IDE part is totally untested. Values below are taken + * from the EP93xx Users's Guide and might not be correct. + */ + control |= M2M_CONTROL_NO_HDSK; + control |= M2M_CONTROL_RSS_IDE; + control |= M2M_CONTROL_PW_16; + + if (data->direction == DMA_TO_DEVICE) { + /* Worst case from the UG */ + control = (3 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_DAH; + control |= M2M_CONTROL_TM_TX; + } else { + control = (2 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_SAH; + control |= M2M_CONTROL_TM_RX; + } + break; + + default: + return -EINVAL; + } + + writel(control, edmac->regs + M2M_CONTROL); + return 0; +} + +static void m2m_hw_shutdown(struct ep93xx_dma_chan *edmac) +{ + /* Just disable the channel */ + writel(0, edmac->regs + M2M_CONTROL); +} + +static void m2m_fill_desc(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + + if (edmac->buffer == 0) { + writel(desc->src_addr, edmac->regs + M2M_SAR_BASE0); + writel(desc->dst_addr, edmac->regs + M2M_DAR_BASE0); + writel(desc->size, edmac->regs + M2M_BCR0); + } else { + writel(desc->src_addr, edmac->regs + M2M_SAR_BASE1); + writel(desc->dst_addr, edmac->regs + M2M_DAR_BASE1); + writel(desc->size, edmac->regs + M2M_BCR1); + } + + edmac->buffer ^= 1; +} + +static void m2m_hw_submit(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_data *data = edmac->chan.private; + u32 control = readl(edmac->regs + M2M_CONTROL); + + /* + * Since we allow clients to configure PW (peripheral width) we always + * clear PW bits here and then set them according what is given in + * the runtime configuration. + */ + control &= ~M2M_CONTROL_PW_MASK; + control |= edmac->runtime_ctrl; + + m2m_fill_desc(edmac); + control |= M2M_CONTROL_DONEINT; + + /* + * Now we can finally enable the channel. For M2M channel this must be + * done _after_ the BCRx registers are programmed. + */ + control |= M2M_CONTROL_ENABLE; + writel(control, edmac->regs + M2M_CONTROL); + + if (!data) { + /* + * For memcpy channels the software trigger must be asserted + * in order to start the memcpy operation. + */ + control |= M2M_CONTROL_START; + writel(control, edmac->regs + M2M_CONTROL); + } +} + +static int m2m_hw_interrupt(struct ep93xx_dma_chan *edmac) +{ + u32 control; + + if (!(readl(edmac->regs + M2M_INTERRUPT) & M2M_INTERRUPT_DONEINT)) + return INTERRUPT_UNKNOWN; + + /* Clear the DONE bit */ + writel(0, edmac->regs + M2M_INTERRUPT); + + /* Disable interrupts and the channel */ + control = readl(edmac->regs + M2M_CONTROL); + control &= ~(M2M_CONTROL_DONEINT | M2M_CONTROL_ENABLE); + writel(control, edmac->regs + M2M_CONTROL); + + /* + * Since we only get DONE interrupt we have to find out ourselves + * whether there still is something to process. So we try to advance + * the chain an see whether it succeeds. + */ + if (ep93xx_dma_advance_active(edmac)) { + edmac->edma->hw_submit(edmac); + return INTERRUPT_NEXT_BUFFER; + } + + return INTERRUPT_DONE; +} + +/* + * DMA engine API implementation + */ + +static struct ep93xx_dma_desc * +ep93xx_dma_desc_get(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc, *_desc; + struct ep93xx_dma_desc *ret = NULL; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + list_for_each_entry_safe(desc, _desc, &edmac->free_list, node) { + if (async_tx_test_ack(&desc->txd)) { + list_del_init(&desc->node); + + /* Re-initialize the descriptor */ + desc->src_addr = 0; + desc->dst_addr = 0; + desc->size = 0; + desc->complete = false; + desc->txd.cookie = 0; + desc->txd.callback = NULL; + desc->txd.callback_param = NULL; + + ret = desc; + break; + } + } + spin_unlock_irqrestore(&edmac->lock, flags); + return ret; +} + +static void ep93xx_dma_desc_put(struct ep93xx_dma_chan *edmac, + struct ep93xx_dma_desc *desc) +{ + if (desc) { + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + list_splice_init(&desc->tx_list, &edmac->free_list); + list_add(&desc->node, &edmac->free_list); + spin_unlock_irqrestore(&edmac->lock, flags); + } +} + +/** + * ep93xx_dma_advance_work - start processing the next pending transaction + * @edmac: channel + * + * If we have pending transactions queued and we are currently idling, this + * function takes the next queued transaction from the @edmac->queue and + * pushes it to the hardware for execution. + */ +static void ep93xx_dma_advance_work(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *new; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + if (!list_empty(&edmac->active) || list_empty(&edmac->queue)) { + spin_unlock_irqrestore(&edmac->lock, flags); + return; + } + + /* Take the next descriptor from the pending queue */ + new = list_first_entry(&edmac->queue, struct ep93xx_dma_desc, node); + list_del_init(&new->node); + + ep93xx_dma_set_active(edmac, new); + + /* Push it to the hardware */ + edmac->edma->hw_submit(edmac); + spin_unlock_irqrestore(&edmac->lock, flags); +} + +static void ep93xx_dma_unmap_buffers(struct ep93xx_dma_desc *desc) +{ + struct device *dev = desc->txd.chan->device->dev; + + if (!(desc->txd.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (desc->txd.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + dma_unmap_single(dev, desc->src_addr, desc->size, + DMA_TO_DEVICE); + else + dma_unmap_page(dev, desc->src_addr, desc->size, + DMA_TO_DEVICE); + } + if (!(desc->txd.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (desc->txd.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + dma_unmap_single(dev, desc->dst_addr, desc->size, + DMA_FROM_DEVICE); + else + dma_unmap_page(dev, desc->dst_addr, desc->size, + DMA_FROM_DEVICE); + } +} + +static void ep93xx_dma_tasklet(unsigned long data) +{ + struct ep93xx_dma_chan *edmac = (struct ep93xx_dma_chan *)data; + struct ep93xx_dma_desc *desc, *d; + dma_async_tx_callback callback; + void *callback_param; + LIST_HEAD(list); + + spin_lock_irq(&edmac->lock); + desc = ep93xx_dma_get_active(edmac); + if (desc->complete) { + edmac->last_completed = desc->txd.cookie; + list_splice_init(&edmac->active, &list); + } + spin_unlock_irq(&edmac->lock); + + /* Pick up the next descriptor from the queue */ + ep93xx_dma_advance_work(edmac); + + callback = desc->txd.callback; + callback_param = desc->txd.callback_param; + + /* Now we can release all the chained descriptors */ + list_for_each_entry_safe(desc, d, &list, node) { + /* + * For the memcpy channels the API requires us to unmap the + * buffers unless requested otherwise. + */ + if (!edmac->chan.private) + ep93xx_dma_unmap_buffers(desc); + + ep93xx_dma_desc_put(edmac, desc); + } + + if (callback) + callback(callback_param); +} + +static irqreturn_t ep93xx_dma_interrupt(int irq, void *dev_id) +{ + struct ep93xx_dma_chan *edmac = dev_id; + irqreturn_t ret = IRQ_HANDLED; + + spin_lock(&edmac->lock); + + switch (edmac->edma->hw_interrupt(edmac)) { + case INTERRUPT_DONE: + ep93xx_dma_get_active(edmac)->complete = true; + tasklet_schedule(&edmac->tasklet); + break; + + case INTERRUPT_NEXT_BUFFER: + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) + tasklet_schedule(&edmac->tasklet); + break; + + default: + dev_warn(chan2dev(edmac), "unknown interrupt!\n"); + ret = IRQ_NONE; + break; + } + + spin_unlock(&edmac->lock); + return ret; +} + +/** + * ep93xx_dma_tx_submit - set the prepared descriptor(s) to be executed + * @tx: descriptor to be executed + * + * Function will execute given descriptor on the hardware or if the hardware + * is busy, queue the descriptor to be executed later on. Returns cookie which + * can be used to poll the status of the descriptor. + */ +static dma_cookie_t ep93xx_dma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(tx->chan); + struct ep93xx_dma_desc *desc; + dma_cookie_t cookie; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + + cookie = edmac->chan.cookie; + + if (++cookie < 0) + cookie = 1; + + desc = container_of(tx, struct ep93xx_dma_desc, txd); + + edmac->chan.cookie = cookie; + desc->txd.cookie = cookie; + + /* + * If nothing is currently prosessed, we push this descriptor + * directly to the hardware. Otherwise we put the descriptor + * to the pending queue. + */ + if (list_empty(&edmac->active)) { + ep93xx_dma_set_active(edmac, desc); + edmac->edma->hw_submit(edmac); + } else { + list_add_tail(&desc->node, &edmac->queue); + } + + spin_unlock_irqrestore(&edmac->lock, flags); + return cookie; +} + +/** + * ep93xx_dma_alloc_chan_resources - allocate resources for the channel + * @chan: channel to allocate resources + * + * Function allocates necessary resources for the given DMA channel and + * returns number of allocated descriptors for the channel. Negative errno + * is returned in case of failure. + */ +static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_data *data = chan->private; + const char *name = dma_chan_name(chan); + int ret, i; + + /* Sanity check the channel parameters */ + if (!edmac->edma->m2m) { + if (!data) + return -EINVAL; + if (data->port < EP93XX_DMA_I2S1 || + data->port > EP93XX_DMA_IRDA) + return -EINVAL; + if (data->direction != ep93xx_dma_chan_direction(chan)) + return -EINVAL; + } else { + if (data) { + switch (data->port) { + case EP93XX_DMA_SSP: + case EP93XX_DMA_IDE: + if (data->direction != DMA_TO_DEVICE && + data->direction != DMA_FROM_DEVICE) + return -EINVAL; + break; + default: + return -EINVAL; + } + } + } + + if (data && data->name) + name = data->name; + + ret = clk_enable(edmac->clk); + if (ret) + return ret; + + ret = request_irq(edmac->irq, ep93xx_dma_interrupt, 0, name, edmac); + if (ret) + goto fail_clk_disable; + + spin_lock_irq(&edmac->lock); + edmac->last_completed = 1; + edmac->chan.cookie = 1; + ret = edmac->edma->hw_setup(edmac); + spin_unlock_irq(&edmac->lock); + + if (ret) + goto fail_free_irq; + + for (i = 0; i < DMA_MAX_CHAN_DESCRIPTORS; i++) { + struct ep93xx_dma_desc *desc; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) { + dev_warn(chan2dev(edmac), "not enough descriptors\n"); + break; + } + + INIT_LIST_HEAD(&desc->tx_list); + + dma_async_tx_descriptor_init(&desc->txd, chan); + desc->txd.flags = DMA_CTRL_ACK; + desc->txd.tx_submit = ep93xx_dma_tx_submit; + + ep93xx_dma_desc_put(edmac, desc); + } + + return i; + +fail_free_irq: + free_irq(edmac->irq, edmac); +fail_clk_disable: + clk_disable(edmac->clk); + + return ret; +} + +/** + * ep93xx_dma_free_chan_resources - release resources for the channel + * @chan: channel + * + * Function releases all the resources allocated for the given channel. + * The channel must be idle when this is called. + */ +static void ep93xx_dma_free_chan_resources(struct dma_chan *chan) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *d; + unsigned long flags; + LIST_HEAD(list); + + BUG_ON(!list_empty(&edmac->active)); + BUG_ON(!list_empty(&edmac->queue)); + + spin_lock_irqsave(&edmac->lock, flags); + edmac->edma->hw_shutdown(edmac); + edmac->runtime_addr = 0; + edmac->runtime_ctrl = 0; + edmac->buffer = 0; + list_splice_init(&edmac->free_list, &list); + spin_unlock_irqrestore(&edmac->lock, flags); + + list_for_each_entry_safe(desc, d, &list, node) + kfree(desc); + + clk_disable(edmac->clk); + free_irq(edmac->irq, edmac); +} + +/** + * ep93xx_dma_prep_dma_memcpy - prepare a memcpy DMA operation + * @chan: channel + * @dest: destination bus address + * @src: source bus address + * @len: size of the transaction + * @flags: flags for the descriptor + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +struct dma_async_tx_descriptor * +ep93xx_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, + dma_addr_t src, size_t len, unsigned long flags) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + size_t bytes, offset; + + first = NULL; + for (offset = 0; offset < len; offset += bytes) { + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + bytes = min_t(size_t, len - offset, DMA_MAX_CHAN_BYTES); + + desc->src_addr = src + offset; + desc->dst_addr = dest + offset; + desc->size = bytes; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + first->txd.flags = flags; + + return &first->txd; +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_prep_slave_sg - prepare a slave DMA operation + * @chan: channel + * @sgl: list of buffers to transfer + * @sg_len: number of entries in @sgl + * @dir: direction of tha DMA transfer + * @flags: flags for the descriptor + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +static struct dma_async_tx_descriptor * +ep93xx_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_data_direction dir, + unsigned long flags) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + struct scatterlist *sg; + int i; + + if (!edmac->edma->m2m && dir != ep93xx_dma_chan_direction(chan)) { + dev_warn(chan2dev(edmac), + "channel was configured with different direction\n"); + return NULL; + } + + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) { + dev_warn(chan2dev(edmac), + "channel is already used for cyclic transfers\n"); + return NULL; + } + + first = NULL; + for_each_sg(sgl, sg, sg_len, i) { + size_t sg_len = sg_dma_len(sg); + + if (sg_len > DMA_MAX_CHAN_BYTES) { + dev_warn(chan2dev(edmac), "too big transfer size %d\n", + sg_len); + goto fail; + } + + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + if (dir == DMA_TO_DEVICE) { + desc->src_addr = sg_dma_address(sg); + desc->dst_addr = edmac->runtime_addr; + } else { + desc->src_addr = edmac->runtime_addr; + desc->dst_addr = sg_dma_address(sg); + } + desc->size = sg_len; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + first->txd.flags = flags; + + return &first->txd; + +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_prep_dma_cyclic - prepare a cyclic DMA operation + * @chan: channel + * @dma_addr: DMA mapped address of the buffer + * @buf_len: length of the buffer (in bytes) + * @period_len: lenght of a single period + * @dir: direction of the operation + * + * Prepares a descriptor for cyclic DMA operation. This means that once the + * descriptor is submitted, we will be submitting in a @period_len sized + * buffers and calling callback once the period has been elapsed. Transfer + * terminates only when client calls dmaengine_terminate_all() for this + * channel. + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +static struct dma_async_tx_descriptor * +ep93xx_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, + size_t buf_len, size_t period_len, + enum dma_data_direction dir) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + size_t offset = 0; + + if (!edmac->edma->m2m && dir != ep93xx_dma_chan_direction(chan)) { + dev_warn(chan2dev(edmac), + "channel was configured with different direction\n"); + return NULL; + } + + if (test_and_set_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) { + dev_warn(chan2dev(edmac), + "channel is already used for cyclic transfers\n"); + return NULL; + } + + if (period_len > DMA_MAX_CHAN_BYTES) { + dev_warn(chan2dev(edmac), "too big period length %d\n", + period_len); + return NULL; + } + + /* Split the buffer into period size chunks */ + first = NULL; + for (offset = 0; offset < buf_len; offset += period_len) { + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + if (dir == DMA_TO_DEVICE) { + desc->src_addr = dma_addr + offset; + desc->dst_addr = edmac->runtime_addr; + } else { + desc->src_addr = edmac->runtime_addr; + desc->dst_addr = dma_addr + offset; + } + + desc->size = period_len; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + + return &first->txd; + +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_terminate_all - terminate all transactions + * @edmac: channel + * + * Stops all DMA transactions. All descriptors are put back to the + * @edmac->free_list and callbacks are _not_ called. + */ +static int ep93xx_dma_terminate_all(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc, *_d; + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&edmac->lock, flags); + /* First we disable and flush the DMA channel */ + edmac->edma->hw_shutdown(edmac); + clear_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags); + list_splice_init(&edmac->active, &list); + list_splice_init(&edmac->queue, &list); + /* + * We then re-enable the channel. This way we can continue submitting + * the descriptors by just calling ->hw_submit() again. + */ + edmac->edma->hw_setup(edmac); + spin_unlock_irqrestore(&edmac->lock, flags); + + list_for_each_entry_safe(desc, _d, &list, node) + ep93xx_dma_desc_put(edmac, desc); + + return 0; +} + +static int ep93xx_dma_slave_config(struct ep93xx_dma_chan *edmac, + struct dma_slave_config *config) +{ + enum dma_slave_buswidth width; + unsigned long flags; + u32 addr, ctrl; + + if (!edmac->edma->m2m) + return -EINVAL; + + switch (config->direction) { + case DMA_FROM_DEVICE: + width = config->src_addr_width; + addr = config->src_addr; + break; + + case DMA_TO_DEVICE: + width = config->dst_addr_width; + addr = config->dst_addr; + break; + + default: + return -EINVAL; + } + + switch (width) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + ctrl = 0; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + ctrl = M2M_CONTROL_PW_16; + break; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + ctrl = M2M_CONTROL_PW_32; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&edmac->lock, flags); + edmac->runtime_addr = addr; + edmac->runtime_ctrl = ctrl; + spin_unlock_irqrestore(&edmac->lock, flags); + + return 0; +} + +/** + * ep93xx_dma_control - manipulate all pending operations on a channel + * @chan: channel + * @cmd: control command to perform + * @arg: optional argument + * + * Controls the channel. Function returns %0 in case of success or negative + * error in case of failure. + */ +static int ep93xx_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct dma_slave_config *config; + + switch (cmd) { + case DMA_TERMINATE_ALL: + return ep93xx_dma_terminate_all(edmac); + + case DMA_SLAVE_CONFIG: + config = (struct dma_slave_config *)arg; + return ep93xx_dma_slave_config(edmac, config); + + default: + break; + } + + return -ENOSYS; +} + +/** + * ep93xx_dma_tx_status - check if a transaction is completed + * @chan: channel + * @cookie: transaction specific cookie + * @state: state of the transaction is stored here if given + * + * This function can be used to query state of a given transaction. + */ +static enum dma_status ep93xx_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, + struct dma_tx_state *state) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + dma_cookie_t last_used, last_completed; + enum dma_status ret; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + last_used = chan->cookie; + last_completed = edmac->last_completed; + spin_unlock_irqrestore(&edmac->lock, flags); + + ret = dma_async_is_complete(cookie, last_completed, last_used); + dma_set_tx_state(state, last_completed, last_used, 0); + + return ret; +} + +/** + * ep93xx_dma_issue_pending - push pending transactions to the hardware + * @chan: channel + * + * When this function is called, all pending transactions are pushed to the + * hardware and executed. + */ +static void ep93xx_dma_issue_pending(struct dma_chan *chan) +{ + ep93xx_dma_advance_work(to_ep93xx_dma_chan(chan)); +} + +static int __init ep93xx_dma_probe(struct platform_device *pdev) +{ + struct ep93xx_dma_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct ep93xx_dma_engine *edma; + struct dma_device *dma_dev; + size_t edma_size; + int ret, i; + + edma_size = pdata->num_channels * sizeof(struct ep93xx_dma_chan); + edma = kzalloc(sizeof(*edma) + edma_size, GFP_KERNEL); + if (!edma) + return -ENOMEM; + + dma_dev = &edma->dma_dev; + edma->m2m = platform_get_device_id(pdev)->driver_data; + edma->num_channels = pdata->num_channels; + + INIT_LIST_HEAD(&dma_dev->channels); + for (i = 0; i < pdata->num_channels; i++) { + const struct ep93xx_dma_chan_data *cdata = &pdata->channels[i]; + struct ep93xx_dma_chan *edmac = &edma->channels[i]; + + edmac->chan.device = dma_dev; + edmac->regs = cdata->base; + edmac->irq = cdata->irq; + edmac->edma = edma; + + edmac->clk = clk_get(NULL, cdata->name); + if (IS_ERR(edmac->clk)) { + dev_warn(&pdev->dev, "failed to get clock for %s\n", + cdata->name); + continue; + } + + spin_lock_init(&edmac->lock); + INIT_LIST_HEAD(&edmac->active); + INIT_LIST_HEAD(&edmac->queue); + INIT_LIST_HEAD(&edmac->free_list); + tasklet_init(&edmac->tasklet, ep93xx_dma_tasklet, + (unsigned long)edmac); + + list_add_tail(&edmac->chan.device_node, + &dma_dev->channels); + } + + dma_cap_zero(dma_dev->cap_mask); + dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); + dma_cap_set(DMA_CYCLIC, dma_dev->cap_mask); + + dma_dev->dev = &pdev->dev; + dma_dev->device_alloc_chan_resources = ep93xx_dma_alloc_chan_resources; + dma_dev->device_free_chan_resources = ep93xx_dma_free_chan_resources; + dma_dev->device_prep_slave_sg = ep93xx_dma_prep_slave_sg; + dma_dev->device_prep_dma_cyclic = ep93xx_dma_prep_dma_cyclic; + dma_dev->device_control = ep93xx_dma_control; + dma_dev->device_issue_pending = ep93xx_dma_issue_pending; + dma_dev->device_tx_status = ep93xx_dma_tx_status; + + dma_set_max_seg_size(dma_dev->dev, DMA_MAX_CHAN_BYTES); + + if (edma->m2m) { + dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); + dma_dev->device_prep_dma_memcpy = ep93xx_dma_prep_dma_memcpy; + + edma->hw_setup = m2m_hw_setup; + edma->hw_shutdown = m2m_hw_shutdown; + edma->hw_submit = m2m_hw_submit; + edma->hw_interrupt = m2m_hw_interrupt; + } else { + dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask); + + edma->hw_setup = m2p_hw_setup; + edma->hw_shutdown = m2p_hw_shutdown; + edma->hw_submit = m2p_hw_submit; + edma->hw_interrupt = m2p_hw_interrupt; + } + + ret = dma_async_device_register(dma_dev); + if (unlikely(ret)) { + for (i = 0; i < edma->num_channels; i++) { + struct ep93xx_dma_chan *edmac = &edma->channels[i]; + if (!IS_ERR_OR_NULL(edmac->clk)) + clk_put(edmac->clk); + } + kfree(edma); + } else { + dev_info(dma_dev->dev, "EP93xx M2%s DMA ready\n", + edma->m2m ? "M" : "P"); + } + + return ret; +} + +static struct platform_device_id ep93xx_dma_driver_ids[] = { + { "ep93xx-dma-m2p", 0 }, + { "ep93xx-dma-m2m", 1 }, + { }, +}; + +static struct platform_driver ep93xx_dma_driver = { + .driver = { + .name = "ep93xx-dma", + }, + .id_table = ep93xx_dma_driver_ids, +}; + +static int __init ep93xx_dma_module_init(void) +{ + return platform_driver_probe(&ep93xx_dma_driver, ep93xx_dma_probe); +} +subsys_initcall(ep93xx_dma_module_init); + +MODULE_AUTHOR("Mika Westerberg "); +MODULE_DESCRIPTION("EP93xx DMA driver"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From f911d026e84a137e35701a4f23732f47ce40a6b8 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:03 +0300 Subject: ep93xx: add dmaengine platform code Add platform support code for the new EP93xx dmaengine driver. Signed-off-by: Mika Westerberg Signed-off-by: Ryan Mallon Acked-by: H Hartley Sweeten Signed-off-by: Vinod Koul diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 33ee2c8..4920f7a 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -6,6 +6,8 @@ obj-m := obj-n := obj- := +obj-$(CONFIG_EP93XX_DMA) += dma.o + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c new file mode 100644 index 0000000..5a25708 --- /dev/null +++ b/arch/arm/mach-ep93xx/dma.c @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-ep93xx/dma.c + * + * Platform support code for the EP93xx dmaengine driver. + * + * Copyright (C) 2011 Mika Westerberg + * + * This work is based on the original dma-m2p implementation with + * following copyrights: + * + * Copyright (C) 2006 Lennert Buytenhek + * Copyright (C) 2006 Applied Data Systems + * Copyright (C) 2009 Ryan Mallon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DMA_CHANNEL(_name, _base, _irq) \ + { .name = (_name), .base = (_base), .irq = (_irq) } + +/* + * DMA M2P channels. + * + * On the EP93xx chip the following peripherals my be allocated to the 10 + * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). + * + * I2S contains 3 Tx and 3 Rx DMA Channels + * AAC contains 3 Tx and 3 Rx DMA Channels + * UART1 contains 1 Tx and 1 Rx DMA Channels + * UART2 contains 1 Tx and 1 Rx DMA Channels + * UART3 contains 1 Tx and 1 Rx DMA Channels + * IrDA contains 1 Tx and 1 Rx DMA Channels + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { + DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), + DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), + DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), + DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), + DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), + DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), + DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), + DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), + DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), + DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { + .channels = ep93xx_dma_m2p_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), +}; + +static struct platform_device ep93xx_dma_m2p_device = { + .name = "ep93xx-dma-m2p", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2p_data, + }, +}; + +/* + * DMA M2M channels. + * + * There are 2 M2M channels which support memcpy/memset and in addition simple + * hardware requests from/to SSP and IDE. We do not implement an external + * hardware requests. + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { + DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), + DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { + .channels = ep93xx_dma_m2m_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), +}; + +static struct platform_device ep93xx_dma_m2m_device = { + .name = "ep93xx-dma-m2m", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2m_data, + }, +}; + +static int __init ep93xx_dma_init(void) +{ + platform_device_register(&ep93xx_dma_m2p_device); + platform_device_register(&ep93xx_dma_m2m_device); + return 0; +} +arch_initcall(ep93xx_dma_init); -- cgit v0.10.2 From a103fc67c612bfc0f6388885fea7244967afaad4 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:04 +0300 Subject: ASoC: ep93xx: convert to use the DMA engine API Now that we have the EP93xx DMA engine driver in place, we convert the ASoC drivers (I2S, AC97 and PCM) to take advantage of this new API. There are no functional changes. Signed-off-by: Mika Westerberg Acked-by: H Hartley Sweeten Acked-by: Liam Girdwood Acked-by: Mark Brown Signed-off-by: Vinod Koul diff --git a/sound/soc/ep93xx/ep93xx-ac97.c b/sound/soc/ep93xx/ep93xx-ac97.c index 104e95c..c7417c7 100644 --- a/sound/soc/ep93xx/ep93xx-ac97.c +++ b/sound/soc/ep93xx/ep93xx-ac97.c @@ -106,12 +106,12 @@ static struct ep93xx_ac97_info *ep93xx_ac97_info; static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_out = { .name = "ac97-pcm-out", - .dma_port = EP93XX_DMA_M2P_PORT_AAC1, + .dma_port = EP93XX_DMA_AAC1, }; static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_in = { .name = "ac97-pcm-in", - .dma_port = EP93XX_DMA_M2P_PORT_AAC1, + .dma_port = EP93XX_DMA_AAC1, }; static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info, diff --git a/sound/soc/ep93xx/ep93xx-i2s.c b/sound/soc/ep93xx/ep93xx-i2s.c index 042f4e9..30df425 100644 --- a/sound/soc/ep93xx/ep93xx-i2s.c +++ b/sound/soc/ep93xx/ep93xx-i2s.c @@ -70,11 +70,11 @@ struct ep93xx_i2s_info { struct ep93xx_pcm_dma_params ep93xx_i2s_dma_params[] = { [SNDRV_PCM_STREAM_PLAYBACK] = { .name = "i2s-pcm-out", - .dma_port = EP93XX_DMA_M2P_PORT_I2S1, + .dma_port = EP93XX_DMA_I2S1, }, [SNDRV_PCM_STREAM_CAPTURE] = { .name = "i2s-pcm-in", - .dma_port = EP93XX_DMA_M2P_PORT_I2S1, + .dma_port = EP93XX_DMA_I2S1, }, }; diff --git a/sound/soc/ep93xx/ep93xx-pcm.c b/sound/soc/ep93xx/ep93xx-pcm.c index a456e49..a07f99c 100644 --- a/sound/soc/ep93xx/ep93xx-pcm.c +++ b/sound/soc/ep93xx/ep93xx-pcm.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -53,43 +54,34 @@ static const struct snd_pcm_hardware ep93xx_pcm_hardware = { struct ep93xx_runtime_data { - struct ep93xx_dma_m2p_client cl; - struct ep93xx_pcm_dma_params *params; int pointer_bytes; - struct tasklet_struct period_tasklet; int periods; - struct ep93xx_dma_buffer buf[32]; + int period_bytes; + struct dma_chan *dma_chan; + struct ep93xx_dma_data dma_data; }; -static void ep93xx_pcm_period_elapsed(unsigned long data) +static void ep93xx_pcm_dma_callback(void *data) { - struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data; - snd_pcm_period_elapsed(substream); -} + struct snd_pcm_substream *substream = data; + struct ep93xx_runtime_data *rtd = substream->runtime->private_data; -static void ep93xx_pcm_buffer_started(void *cookie, - struct ep93xx_dma_buffer *buf) -{ + rtd->pointer_bytes += rtd->period_bytes; + rtd->pointer_bytes %= rtd->period_bytes * rtd->periods; + + snd_pcm_period_elapsed(substream); } -static void ep93xx_pcm_buffer_finished(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error) +static bool ep93xx_pcm_dma_filter(struct dma_chan *chan, void *filter_param) { - struct snd_pcm_substream *substream = cookie; - struct ep93xx_runtime_data *rtd = substream->runtime->private_data; - - if (buf == rtd->buf + rtd->periods - 1) - rtd->pointer_bytes = 0; - else - rtd->pointer_bytes += buf->size; + struct ep93xx_dma_data *data = filter_param; - if (!error) { - ep93xx_dma_m2p_submit_recursive(&rtd->cl, buf); - tasklet_schedule(&rtd->period_tasklet); - } else { - snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); + if (data->direction == ep93xx_dma_chan_direction(chan)) { + chan->private = data; + return true; } + + return false; } static int ep93xx_pcm_open(struct snd_pcm_substream *substream) @@ -98,30 +90,38 @@ static int ep93xx_pcm_open(struct snd_pcm_substream *substream) struct snd_soc_dai *cpu_dai = soc_rtd->cpu_dai; struct ep93xx_pcm_dma_params *dma_params; struct ep93xx_runtime_data *rtd; + dma_cap_mask_t mask; int ret; - dma_params = snd_soc_dai_get_dma_data(cpu_dai, substream); + ret = snd_pcm_hw_constraint_integer(substream->runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + return ret; + snd_soc_set_runtime_hwparams(substream, &ep93xx_pcm_hardware); rtd = kmalloc(sizeof(*rtd), GFP_KERNEL); if (!rtd) return -ENOMEM; - memset(&rtd->period_tasklet, 0, sizeof(rtd->period_tasklet)); - rtd->period_tasklet.func = ep93xx_pcm_period_elapsed; - rtd->period_tasklet.data = (unsigned long)substream; - - rtd->cl.name = dma_params->name; - rtd->cl.flags = dma_params->dma_port | EP93XX_DMA_M2P_IGNORE_ERROR | - ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - EP93XX_DMA_M2P_TX : EP93XX_DMA_M2P_RX); - rtd->cl.cookie = substream; - rtd->cl.buffer_started = ep93xx_pcm_buffer_started; - rtd->cl.buffer_finished = ep93xx_pcm_buffer_finished; - ret = ep93xx_dma_m2p_client_register(&rtd->cl); - if (ret < 0) { + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + dma_cap_set(DMA_CYCLIC, mask); + + dma_params = snd_soc_dai_get_dma_data(cpu_dai, substream); + rtd->dma_data.port = dma_params->dma_port; + rtd->dma_data.name = dma_params->name; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + rtd->dma_data.direction = DMA_TO_DEVICE; + else + rtd->dma_data.direction = DMA_FROM_DEVICE; + + rtd->dma_chan = dma_request_channel(mask, ep93xx_pcm_dma_filter, + &rtd->dma_data); + if (!rtd->dma_chan) { kfree(rtd); - return ret; + return -EINVAL; } substream->runtime->private_data = rtd; @@ -132,31 +132,52 @@ static int ep93xx_pcm_close(struct snd_pcm_substream *substream) { struct ep93xx_runtime_data *rtd = substream->runtime->private_data; - ep93xx_dma_m2p_client_unregister(&rtd->cl); + dma_release_channel(rtd->dma_chan); kfree(rtd); return 0; } +static int ep93xx_pcm_dma_submit(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct ep93xx_runtime_data *rtd = runtime->private_data; + struct dma_chan *chan = rtd->dma_chan; + struct dma_device *dma_dev = chan->device; + struct dma_async_tx_descriptor *desc; + + rtd->pointer_bytes = 0; + desc = dma_dev->device_prep_dma_cyclic(chan, runtime->dma_addr, + rtd->period_bytes * rtd->periods, + rtd->period_bytes, + rtd->dma_data.direction); + if (!desc) + return -EINVAL; + + desc->callback = ep93xx_pcm_dma_callback; + desc->callback_param = substream; + + dmaengine_submit(desc); + return 0; +} + +static void ep93xx_pcm_dma_flush(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct ep93xx_runtime_data *rtd = runtime->private_data; + + dmaengine_terminate_all(rtd->dma_chan); +} + static int ep93xx_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_pcm_runtime *runtime = substream->runtime; struct ep93xx_runtime_data *rtd = runtime->private_data; - size_t totsize = params_buffer_bytes(params); - size_t period = params_period_bytes(params); - int i; snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = totsize; - - rtd->periods = (totsize + period - 1) / period; - for (i = 0; i < rtd->periods; i++) { - rtd->buf[i].bus_addr = runtime->dma_addr + (i * period); - rtd->buf[i].size = period; - if ((i + 1) * period > totsize) - rtd->buf[i].size = totsize - (i * period); - } + rtd->periods = params_periods(params); + rtd->period_bytes = params_period_bytes(params); return 0; } @@ -168,24 +189,20 @@ static int ep93xx_pcm_hw_free(struct snd_pcm_substream *substream) static int ep93xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) { - struct ep93xx_runtime_data *rtd = substream->runtime->private_data; int ret; - int i; ret = 0; switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - rtd->pointer_bytes = 0; - for (i = 0; i < rtd->periods; i++) - ep93xx_dma_m2p_submit(&rtd->cl, rtd->buf + i); + ret = ep93xx_pcm_dma_submit(substream); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - ep93xx_dma_m2p_flush(&rtd->cl); + ep93xx_pcm_dma_flush(substream); break; default: -- cgit v0.10.2 From 8e4a93008db7780e45838fe65840b289f389ef4a Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:05 +0300 Subject: ep93xx: remove the old M2P DMA code Since we have converted all existing users of the old DMA API to use the DMA engine API the old code can be dropped. Signed-off-by: Mika Westerberg Acked-by: Ryan Mallon Acked-by: H Hartley Sweeten Signed-off-by: Vinod Koul diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 4920f7a..21e721a 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o dma-m2p.o gpio.o +obj-y := core.o clock.o gpio.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c deleted file mode 100644 index a696d35..0000000 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * arch/arm/mach-ep93xx/dma-m2p.c - * M2P DMA handling for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek - * Copyright (C) 2006 Applied Data Systems - * - * Copyright (C) 2009 Ryan Mallon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -/* - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * SSP and IDE use the Memory to Memory (M2M) channels and are not covered - * with this implementation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include - -#include -#include - -#define M2P_CONTROL 0x00 -#define M2P_CONTROL_STALL_IRQ_EN (1 << 0) -#define M2P_CONTROL_NFB_IRQ_EN (1 << 1) -#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3) -#define M2P_CONTROL_ENABLE (1 << 4) -#define M2P_INTERRUPT 0x04 -#define M2P_INTERRUPT_STALL (1 << 0) -#define M2P_INTERRUPT_NFB (1 << 1) -#define M2P_INTERRUPT_ERROR (1 << 3) -#define M2P_PPALLOC 0x08 -#define M2P_STATUS 0x0c -#define M2P_REMAIN 0x14 -#define M2P_MAXCNT0 0x20 -#define M2P_BASE0 0x24 -#define M2P_MAXCNT1 0x30 -#define M2P_BASE1 0x34 - -#define STATE_IDLE 0 /* Channel is inactive. */ -#define STATE_STALL 1 /* Channel is active, no buffers pending. */ -#define STATE_ON 2 /* Channel is active, one buffer pending. */ -#define STATE_NEXT 3 /* Channel is active, two buffers pending. */ - -struct m2p_channel { - char *name; - void __iomem *base; - int irq; - - struct clk *clk; - spinlock_t lock; - - void *client; - unsigned next_slot:1; - struct ep93xx_dma_buffer *buffer_xfer; - struct ep93xx_dma_buffer *buffer_next; - struct list_head buffers_pending; -}; - -static struct m2p_channel m2p_rx[] = { - {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1}, - {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3}, - {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5}, - {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7}, - {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9}, - {NULL}, -}; - -static struct m2p_channel m2p_tx[] = { - {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0}, - {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2}, - {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4}, - {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6}, - {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8}, - {NULL}, -}; - -static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf) -{ - if (ch->next_slot == 0) { - writel(buf->size, ch->base + M2P_MAXCNT0); - writel(buf->bus_addr, ch->base + M2P_BASE0); - } else { - writel(buf->size, ch->base + M2P_MAXCNT1); - writel(buf->bus_addr, ch->base + M2P_BASE1); - } - ch->next_slot ^= 1; -} - -static void choose_buffer_xfer(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_xfer = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_xfer = buf; - } -} - -static void choose_buffer_next(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_next = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_next = buf; - } -} - -static inline void m2p_set_control(struct m2p_channel *ch, u32 v) -{ - /* - * The control register must be read immediately after being written so - * that the internal state machine is correctly updated. See the ep93xx - * users' guide for details. - */ - writel(v, ch->base + M2P_CONTROL); - readl(ch->base + M2P_CONTROL); -} - -static inline int m2p_channel_state(struct m2p_channel *ch) -{ - return (readl(ch->base + M2P_STATUS) >> 4) & 0x3; -} - -static irqreturn_t m2p_irq(int irq, void *dev_id) -{ - struct m2p_channel *ch = dev_id; - struct ep93xx_dma_m2p_client *cl; - u32 irq_status, v; - int error = 0; - - cl = ch->client; - - spin_lock(&ch->lock); - irq_status = readl(ch->base + M2P_INTERRUPT); - - if (irq_status & M2P_INTERRUPT_ERROR) { - writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT); - error = 1; - } - - if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) { - spin_unlock(&ch->lock); - return IRQ_NONE; - } - - switch (m2p_channel_state(ch)) { - case STATE_IDLE: - pr_crit("dma interrupt without a dma buffer\n"); - BUG(); - break; - - case STATE_STALL: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - if (ch->buffer_next != NULL) { - cl->buffer_finished(cl->cookie, ch->buffer_next, - 0, error); - } - choose_buffer_xfer(ch); - choose_buffer_next(ch); - if (ch->buffer_xfer != NULL) - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_ON: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - ch->buffer_xfer = ch->buffer_next; - choose_buffer_next(ch); - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_NEXT: - pr_crit("dma interrupt while next\n"); - BUG(); - break; - } - - v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN | - M2P_CONTROL_NFB_IRQ_EN); - if (ch->buffer_xfer != NULL) - v |= M2P_CONTROL_STALL_IRQ_EN; - if (ch->buffer_next != NULL) - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - - spin_unlock(&ch->lock); - return IRQ_HANDLED; -} - -static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int i; - - if (cl->flags & EP93XX_DMA_M2P_RX) - ch = m2p_rx; - else - ch = m2p_tx; - - for (i = 0; ch[i].base; i++) { - struct ep93xx_dma_m2p_client *client; - - client = ch[i].client; - if (client != NULL) { - int port; - - port = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - if (port == (client->flags & - EP93XX_DMA_M2P_PORT_MASK)) { - pr_warning("DMA channel already used by %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-EBUSY); - } - } - } - - for (i = 0; ch[i].base; i++) { - if (ch[i].client == NULL) - return ch + i; - } - - pr_warning("No free DMA channel for %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-ENODEV); -} - -static void channel_enable(struct m2p_channel *ch) -{ - struct ep93xx_dma_m2p_client *cl = ch->client; - u32 v; - - clk_enable(ch->clk); - - v = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - writel(v, ch->base + M2P_PPALLOC); - - v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK; - v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN; - m2p_set_control(ch, v); -} - -static void channel_disable(struct m2p_channel *ch) -{ - u32 v; - - v = readl(ch->base + M2P_CONTROL); - v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); - m2p_set_control(ch, v); - - while (m2p_channel_state(ch) >= STATE_ON) - cpu_relax(); - - m2p_set_control(ch, 0x0); - - while (m2p_channel_state(ch) == STATE_STALL) - cpu_relax(); - - clk_disable(ch->clk); -} - -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int err; - - ch = find_free_channel(cl); - if (IS_ERR(ch)) - return PTR_ERR(ch); - - err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch); - if (err) - return err; - - ch->client = cl; - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - - cl->channel = ch; - - channel_enable(ch); - - return 0; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register); - -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - free_irq(ch->irq, ch); - ch->client = NULL; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister); - -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - unsigned long flags; - u32 v; - - spin_lock_irqsave(&ch->lock, flags); - v = readl(ch->base + M2P_CONTROL); - if (ch->buffer_xfer == NULL) { - ch->buffer_xfer = buf; - feed_buf(ch, buf); - cl->buffer_started(cl->cookie, buf); - - v |= M2P_CONTROL_STALL_IRQ_EN; - m2p_set_control(ch, v); - - } else if (ch->buffer_next == NULL) { - ch->buffer_next = buf; - feed_buf(ch, buf); - - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - } else { - list_add_tail(&buf->list, &ch->buffers_pending); - } - spin_unlock_irqrestore(&ch->lock, flags); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit); - -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - - list_add_tail(&buf->list, &ch->buffers_pending); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive); - -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - channel_enable(ch); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush); - -static int init_channel(struct m2p_channel *ch) -{ - ch->clk = clk_get(NULL, ch->name); - if (IS_ERR(ch->clk)) - return PTR_ERR(ch->clk); - - spin_lock_init(&ch->lock); - ch->client = NULL; - - return 0; -} - -static int __init ep93xx_dma_m2p_init(void) -{ - int i; - int ret; - - for (i = 0; m2p_rx[i].base; i++) { - ret = init_channel(m2p_rx + i); - if (ret) - return ret; - } - - for (i = 0; m2p_tx[i].base; i++) { - ret = init_channel(m2p_tx + i); - if (ret) - return ret; - } - - pr_info("M2P DMA subsystem initialized\n"); - return 0; -} -arch_initcall(ep93xx_dma_m2p_init); diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 6e7049a..46d4d87 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,153 +1,10 @@ -/** - * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine - * - * The EP93xx DMA M2P subsystem handles DMA transfers between memory and - * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. - * See chapter 10 of the EP93xx users guide for full details on the DMA M2P - * engine. - * - * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. - * - */ - #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include #include #include #include -/** - * struct ep93xx_dma_buffer - Information about a buffer to be transferred - * using the DMA M2P engine - * - * @list: Entry in DMA buffer list - * @bus_addr: Physical address of the buffer - * @size: Size of the buffer in bytes - */ -struct ep93xx_dma_buffer { - struct list_head list; - u32 bus_addr; - u16 size; -}; - -/** - * struct ep93xx_dma_m2p_client - Information about a DMA M2P client - * - * @name: Unique name for this client - * @flags: Client flags - * @cookie: User data to pass to callback functions - * @buffer_started: Non NULL function to call when a transfer is started. - * The arguments are the user data cookie and the DMA - * buffer which is starting. - * @buffer_finished: Non NULL function to call when a transfer is completed. - * The arguments are the user data cookie, the DMA buffer - * which has completed, and a boolean flag indicating if - * the transfer had an error. - */ -struct ep93xx_dma_m2p_client { - char *name; - u8 flags; - void *cookie; - void (*buffer_started)(void *cookie, - struct ep93xx_dma_buffer *buf); - void (*buffer_finished)(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error); - - /* private: Internal use only */ - void *channel; -}; - -/* DMA M2P ports */ -#define EP93XX_DMA_M2P_PORT_I2S1 0x00 -#define EP93XX_DMA_M2P_PORT_I2S2 0x01 -#define EP93XX_DMA_M2P_PORT_AAC1 0x02 -#define EP93XX_DMA_M2P_PORT_AAC2 0x03 -#define EP93XX_DMA_M2P_PORT_AAC3 0x04 -#define EP93XX_DMA_M2P_PORT_I2S3 0x05 -#define EP93XX_DMA_M2P_PORT_UART1 0x06 -#define EP93XX_DMA_M2P_PORT_UART2 0x07 -#define EP93XX_DMA_M2P_PORT_UART3 0x08 -#define EP93XX_DMA_M2P_PORT_IRDA 0x09 -#define EP93XX_DMA_M2P_PORT_MASK 0x0f - -/* DMA M2P client flags */ -#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ -#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ - -/* - * DMA M2P client error handling flags. See the EP93xx users guide - * documentation on the DMA M2P CONTROL register for more details - */ -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ - -/** - * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P - * subsystem - * - * @m2p: Client information to register - * returns 0 on success - * - * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA - * client - */ -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); - -/** - * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P - * subsystem - * - * @m2p: Client to unregister - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - */ -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); - -/** - * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * If the current or next transfer positions are free on the M2P client then - * the transfer is started immediately. If not, the transfer is added to the - * list of pending transfers. This function must not be called from the - * buffer_finished callback for an M2P channel. - * - */ -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); - -/** - * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list - * for an M2P channel - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * This function must only be called from the buffer_finished callback for an - * M2P channel. It is commonly used to add the next transfer in a chained list - * of DMA transfers. - */ -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); - -/** - * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client - * - * @m2p: DMA client to flush transfers on - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - * - */ -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); - /* * M2P channels. * -- cgit v0.10.2 From d41071575b0b20b780bb0e8e7e70c62c1b07a883 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:06 +0300 Subject: spi/ep93xx: add DMA support This patch adds DMA support for the EP93xx SPI driver. By default the DMA is not enabled but it can be enabled by setting ep93xx_spi_info.use_dma to true in board configuration file. Note that the SPI driver still uses PIO for small transfers (<= 8 bytes) for performance reasons. Signed-off-by: Mika Westerberg Acked-by: H Hartley Sweeten Cc: Grant Likely Acked-by: Grant Likely Signed-off-by: Vinod Koul diff --git a/Documentation/spi/ep93xx_spi b/Documentation/spi/ep93xx_spi index 6325f5b..d8eb01c 100644 --- a/Documentation/spi/ep93xx_spi +++ b/Documentation/spi/ep93xx_spi @@ -88,6 +88,16 @@ static void __init ts72xx_init_machine(void) ARRAY_SIZE(ts72xx_spi_devices)); } +The driver can use DMA for the transfers also. In this case ts72xx_spi_info +becomes: + +static struct ep93xx_spi_info ts72xx_spi_info = { + .num_chipselect = ARRAY_SIZE(ts72xx_spi_devices), + .use_dma = true; +}; + +Note that CONFIG_EP93XX_DMA should be enabled as well. + Thanks to ========= Martin Guy, H. Hartley Sweeten and others who helped me during development of diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 8207954..cc9f1d4 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -488,11 +488,15 @@ static struct resource ep93xx_spi_resources[] = { }, }; +static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); + static struct platform_device ep93xx_spi_device = { .name = "ep93xx-spi", .id = 0, .dev = { - .platform_data = &ep93xx_spi_master_data, + .platform_data = &ep93xx_spi_master_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_spi_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_spi_resources), .resource = ep93xx_spi_resources, diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h index 0a37961..9bb63ac 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h @@ -7,9 +7,11 @@ struct spi_device; * struct ep93xx_spi_info - EP93xx specific SPI descriptor * @num_chipselect: number of chip selects on this board, must be * at least one + * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { int num_chipselect; + bool use_dma; }; /** diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c index d357007..1cf6454 100644 --- a/drivers/spi/ep93xx_spi.c +++ b/drivers/spi/ep93xx_spi.c @@ -1,7 +1,7 @@ /* * Driver for Cirrus Logic EP93xx SPI controller. * - * Copyright (c) 2010 Mika Westerberg + * Copyright (C) 2010-2011 Mika Westerberg * * Explicit FIFO handling code was inspired by amba-pl022 driver. * @@ -21,13 +21,16 @@ #include #include #include +#include #include #include #include #include #include +#include #include +#include #include #define SSPCR0 0x0000 @@ -71,6 +74,7 @@ * @pdev: pointer to platform device * @clk: clock for the controller * @regs_base: pointer to ioremap()'d registers + * @sspdr_phys: physical address of the SSPDR register * @irq: IRQ number used by the driver * @min_rate: minimum clock rate (in Hz) supported by the controller * @max_rate: maximum clock rate (in Hz) supported by the controller @@ -84,6 +88,14 @@ * @rx: current byte in transfer to receive * @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one * frame decreases this level and sending one frame increases it. + * @dma_rx: RX DMA channel + * @dma_tx: TX DMA channel + * @dma_rx_data: RX parameters passed to the DMA engine + * @dma_tx_data: TX parameters passed to the DMA engine + * @rx_sgt: sg table for RX transfers + * @tx_sgt: sg table for TX transfers + * @zeropage: dummy page used as RX buffer when only TX buffer is passed in by + * the client * * This structure holds EP93xx SPI controller specific information. When * @running is %true, driver accepts transfer requests from protocol drivers. @@ -100,6 +112,7 @@ struct ep93xx_spi { const struct platform_device *pdev; struct clk *clk; void __iomem *regs_base; + unsigned long sspdr_phys; int irq; unsigned long min_rate; unsigned long max_rate; @@ -112,6 +125,13 @@ struct ep93xx_spi { size_t tx; size_t rx; size_t fifo_level; + struct dma_chan *dma_rx; + struct dma_chan *dma_tx; + struct ep93xx_dma_data dma_rx_data; + struct ep93xx_dma_data dma_tx_data; + struct sg_table rx_sgt; + struct sg_table tx_sgt; + void *zeropage; }; /** @@ -496,14 +516,195 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi) espi->fifo_level++; } - if (espi->rx == t->len) { - msg->actual_length += t->len; + if (espi->rx == t->len) return 0; - } return -EINPROGRESS; } +static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) +{ + /* + * Now everything is set up for the current transfer. We prime the TX + * FIFO, enable interrupts, and wait for the transfer to complete. + */ + if (ep93xx_spi_read_write(espi)) { + ep93xx_spi_enable_interrupts(espi); + wait_for_completion(&espi->wait); + } +} + +/** + * ep93xx_spi_dma_prepare() - prepares a DMA transfer + * @espi: ep93xx SPI controller struct + * @dir: DMA transfer direction + * + * Function configures the DMA, maps the buffer and prepares the DMA + * descriptor. Returns a valid DMA descriptor in case of success and ERR_PTR + * in case of failure. + */ +static struct dma_async_tx_descriptor * +ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) +{ + struct spi_transfer *t = espi->current_msg->state; + struct dma_async_tx_descriptor *txd; + enum dma_slave_buswidth buswidth; + struct dma_slave_config conf; + struct scatterlist *sg; + struct sg_table *sgt; + struct dma_chan *chan; + const void *buf, *pbuf; + size_t len = t->len; + int i, ret, nents; + + if (bits_per_word(espi) > 8) + buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; + else + buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; + + memset(&conf, 0, sizeof(conf)); + conf.direction = dir; + + if (dir == DMA_FROM_DEVICE) { + chan = espi->dma_rx; + buf = t->rx_buf; + sgt = &espi->rx_sgt; + + conf.src_addr = espi->sspdr_phys; + conf.src_addr_width = buswidth; + } else { + chan = espi->dma_tx; + buf = t->tx_buf; + sgt = &espi->tx_sgt; + + conf.dst_addr = espi->sspdr_phys; + conf.dst_addr_width = buswidth; + } + + ret = dmaengine_slave_config(chan, &conf); + if (ret) + return ERR_PTR(ret); + + /* + * We need to split the transfer into PAGE_SIZE'd chunks. This is + * because we are using @espi->zeropage to provide a zero RX buffer + * for the TX transfers and we have only allocated one page for that. + * + * For performance reasons we allocate a new sg_table only when + * needed. Otherwise we will re-use the current one. Eventually the + * last sg_table is released in ep93xx_spi_release_dma(). + */ + + nents = DIV_ROUND_UP(len, PAGE_SIZE); + if (nents != sgt->nents) { + sg_free_table(sgt); + + ret = sg_alloc_table(sgt, nents, GFP_KERNEL); + if (ret) + return ERR_PTR(ret); + } + + pbuf = buf; + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes = min_t(size_t, len, PAGE_SIZE); + + if (buf) { + sg_set_page(sg, virt_to_page(pbuf), bytes, + offset_in_page(pbuf)); + } else { + sg_set_page(sg, virt_to_page(espi->zeropage), + bytes, 0); + } + + pbuf += bytes; + len -= bytes; + } + + if (WARN_ON(len)) { + dev_warn(&espi->pdev->dev, "len = %d expected 0!", len); + return ERR_PTR(-EINVAL); + } + + nents = dma_map_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); + if (!nents) + return ERR_PTR(-ENOMEM); + + txd = chan->device->device_prep_slave_sg(chan, sgt->sgl, nents, + dir, DMA_CTRL_ACK); + if (!txd) { + dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); + return ERR_PTR(-ENOMEM); + } + return txd; +} + +/** + * ep93xx_spi_dma_finish() - finishes with a DMA transfer + * @espi: ep93xx SPI controller struct + * @dir: DMA transfer direction + * + * Function finishes with the DMA transfer. After this, the DMA buffer is + * unmapped. + */ +static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi, + enum dma_data_direction dir) +{ + struct dma_chan *chan; + struct sg_table *sgt; + + if (dir == DMA_FROM_DEVICE) { + chan = espi->dma_rx; + sgt = &espi->rx_sgt; + } else { + chan = espi->dma_tx; + sgt = &espi->tx_sgt; + } + + dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); +} + +static void ep93xx_spi_dma_callback(void *callback_param) +{ + complete(callback_param); +} + +static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) +{ + struct spi_message *msg = espi->current_msg; + struct dma_async_tx_descriptor *rxd, *txd; + + rxd = ep93xx_spi_dma_prepare(espi, DMA_FROM_DEVICE); + if (IS_ERR(rxd)) { + dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); + msg->status = PTR_ERR(rxd); + return; + } + + txd = ep93xx_spi_dma_prepare(espi, DMA_TO_DEVICE); + if (IS_ERR(txd)) { + ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); + dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(rxd)); + msg->status = PTR_ERR(txd); + return; + } + + /* We are ready when RX is done */ + rxd->callback = ep93xx_spi_dma_callback; + rxd->callback_param = &espi->wait; + + /* Now submit both descriptors and wait while they finish */ + dmaengine_submit(rxd); + dmaengine_submit(txd); + + dma_async_issue_pending(espi->dma_rx); + dma_async_issue_pending(espi->dma_tx); + + wait_for_completion(&espi->wait); + + ep93xx_spi_dma_finish(espi, DMA_TO_DEVICE); + ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); +} + /** * ep93xx_spi_process_transfer() - processes one SPI transfer * @espi: ep93xx SPI controller struct @@ -556,13 +757,14 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, espi->tx = 0; /* - * Now everything is set up for the current transfer. We prime the TX - * FIFO, enable interrupts, and wait for the transfer to complete. + * There is no point of setting up DMA for the transfers which will + * fit into the FIFO and can be transferred with a single interrupt. + * So in these cases we will be using PIO and don't bother for DMA. */ - if (ep93xx_spi_read_write(espi)) { - ep93xx_spi_enable_interrupts(espi); - wait_for_completion(&espi->wait); - } + if (espi->dma_rx && t->len > SPI_FIFO_SIZE) + ep93xx_spi_dma_transfer(espi); + else + ep93xx_spi_pio_transfer(espi); /* * In case of error during transmit, we bail out from processing @@ -571,6 +773,8 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, if (msg->status) return; + msg->actual_length += t->len; + /* * After this transfer is finished, perform any possible * post-transfer actions requested by the protocol driver. @@ -752,6 +956,75 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param) +{ + if (ep93xx_dma_chan_is_m2p(chan)) + return false; + + chan->private = filter_param; + return true; +} + +static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi) +{ + dma_cap_mask_t mask; + int ret; + + espi->zeropage = (void *)get_zeroed_page(GFP_KERNEL); + if (!espi->zeropage) + return -ENOMEM; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + espi->dma_rx_data.port = EP93XX_DMA_SSP; + espi->dma_rx_data.direction = DMA_FROM_DEVICE; + espi->dma_rx_data.name = "ep93xx-spi-rx"; + + espi->dma_rx = dma_request_channel(mask, ep93xx_spi_dma_filter, + &espi->dma_rx_data); + if (!espi->dma_rx) { + ret = -ENODEV; + goto fail_free_page; + } + + espi->dma_tx_data.port = EP93XX_DMA_SSP; + espi->dma_tx_data.direction = DMA_TO_DEVICE; + espi->dma_tx_data.name = "ep93xx-spi-tx"; + + espi->dma_tx = dma_request_channel(mask, ep93xx_spi_dma_filter, + &espi->dma_tx_data); + if (!espi->dma_tx) { + ret = -ENODEV; + goto fail_release_rx; + } + + return 0; + +fail_release_rx: + dma_release_channel(espi->dma_rx); + espi->dma_rx = NULL; +fail_free_page: + free_page((unsigned long)espi->zeropage); + + return ret; +} + +static void ep93xx_spi_release_dma(struct ep93xx_spi *espi) +{ + if (espi->dma_rx) { + dma_release_channel(espi->dma_rx); + sg_free_table(&espi->rx_sgt); + } + if (espi->dma_tx) { + dma_release_channel(espi->dma_tx); + sg_free_table(&espi->tx_sgt); + } + + if (espi->zeropage) + free_page((unsigned long)espi->zeropage); +} + static int __init ep93xx_spi_probe(struct platform_device *pdev) { struct spi_master *master; @@ -818,6 +1091,7 @@ static int __init ep93xx_spi_probe(struct platform_device *pdev) goto fail_put_clock; } + espi->sspdr_phys = res->start + SSPDR; espi->regs_base = ioremap(res->start, resource_size(res)); if (!espi->regs_base) { dev_err(&pdev->dev, "failed to map resources\n"); @@ -832,10 +1106,13 @@ static int __init ep93xx_spi_probe(struct platform_device *pdev) goto fail_unmap_regs; } + if (info->use_dma && ep93xx_spi_setup_dma(espi)) + dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n"); + espi->wq = create_singlethread_workqueue("ep93xx_spid"); if (!espi->wq) { dev_err(&pdev->dev, "unable to create workqueue\n"); - goto fail_free_irq; + goto fail_free_dma; } INIT_WORK(&espi->msg_work, ep93xx_spi_work); INIT_LIST_HEAD(&espi->msg_queue); @@ -857,7 +1134,8 @@ static int __init ep93xx_spi_probe(struct platform_device *pdev) fail_free_queue: destroy_workqueue(espi->wq); -fail_free_irq: +fail_free_dma: + ep93xx_spi_release_dma(espi); free_irq(espi->irq, espi); fail_unmap_regs: iounmap(espi->regs_base); @@ -901,6 +1179,7 @@ static int __exit ep93xx_spi_remove(struct platform_device *pdev) } spin_unlock_irq(&espi->lock); + ep93xx_spi_release_dma(espi); free_irq(espi->irq, espi); iounmap(espi->regs_base); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v0.10.2 From 7dab35c0c01c5d960d7b551a607270adccfadb42 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 1 Jun 2011 15:10:30 -0700 Subject: dma: ipu_idmac.c: use resource_size in ioremap Signed-off-by: H Hartley Sweeten Cc: Dan Williams Cc: Vinod Koul Cc: Guennadi Liakhovetski Cc: Anatolij Gustschin Signed-off-by: Vinod Koul diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index c1a125e..25447a8 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1705,16 +1705,14 @@ static int __init ipu_probe(struct platform_device *pdev) ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base); /* Remap IPU common registers */ - ipu_data.reg_ipu = ioremap(mem_ipu->start, - mem_ipu->end - mem_ipu->start + 1); + ipu_data.reg_ipu = ioremap(mem_ipu->start, resource_size(mem_ipu)); if (!ipu_data.reg_ipu) { ret = -ENOMEM; goto err_ioremap_ipu; } /* Remap Image Converter and Image DMA Controller registers */ - ipu_data.reg_ic = ioremap(mem_ic->start, - mem_ic->end - mem_ic->start + 1); + ipu_data.reg_ic = ioremap(mem_ic->start, resource_size(mem_ic)); if (!ipu_data.reg_ic) { ret = -ENOMEM; goto err_ioremap_ic; -- cgit v0.10.2 From 114df7d66efd5c23561782f38e97c48fb30d4f5d Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 1 Jun 2011 15:16:09 -0700 Subject: dma: at_hdmac.c: use resource_size Signed-off-by: H Hartley Sweeten Cc: Dan Williams Cc: Vinod Koul Signed-off-by: Vinod Koul diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 36144f8..6a483ea 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1216,7 +1216,7 @@ static int __init at_dma_probe(struct platform_device *pdev) atdma->dma_common.cap_mask = pdata->cap_mask; atdma->all_chan_mask = (1 << pdata->nr_channels) - 1; - size = io->end - io->start + 1; + size = resource_size(io); if (!request_mem_region(io->start, size, pdev->dev.driver->name)) { err = -EBUSY; goto err_kfree; @@ -1362,7 +1362,7 @@ static int __exit at_dma_remove(struct platform_device *pdev) atdma->regs = NULL; io = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(io->start, io->end - io->start + 1); + release_mem_region(io->start, resource_size(io)); kfree(atdma); -- cgit v0.10.2 From a01cdc10689f5d252530d14474528ea785ecfde4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 8 Jun 2011 17:06:25 +0900 Subject: serial: sh-sci: Tidy up ioread/write wrappers, kill off unused SCI helper. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 4dc249e..923ebd9 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -181,32 +181,25 @@ #define SCI_MAJOR 204 #define SCI_MINOR_START 8 -#define SCI_IN(size, offset) \ - if ((size) == 8) { \ - return ioread8(port->membase + (offset)); \ - } else { \ - return ioread16(port->membase + (offset)); \ - } -#define SCI_OUT(size, offset, value) \ - if ((size) == 8) { \ - iowrite8(value, port->membase + (offset)); \ - } else if ((size) == 16) { \ - iowrite16(value, port->membase + (offset)); \ - } +#define SCI_IN(size, offset) \ + ioread##size(port->membase + (offset)) + +#define SCI_OUT(size, offset, value) \ + iowrite##size(value, port->membase + (offset)) #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_IN(scif_size, scif_offset) \ + return SCI_IN(scif_size, scif_offset); \ } else { /* PORT_SCI or PORT_SCIFA */ \ - SCI_IN(sci_size, sci_offset); \ + return SCI_IN(sci_size, sci_offset); \ } \ } \ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ { \ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_OUT(scif_size, scif_offset, value) \ + SCI_OUT(scif_size, scif_offset, value); \ } else { /* PORT_SCI or PORT_SCIFA */ \ SCI_OUT(sci_size, sci_offset, value); \ } \ @@ -215,23 +208,13 @@ #define CPU_SCIF_FNS(name, scif_offset, scif_size) \ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ - SCI_IN(scif_size, scif_offset); \ + return SCI_IN(scif_size, scif_offset); \ } \ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ { \ SCI_OUT(scif_size, scif_offset, value); \ } -#define CPU_SCI_FNS(name, sci_offset, sci_size) \ - static inline unsigned int sci_##name##_in(struct uart_port* port) \ - { \ - SCI_IN(sci_size, sci_offset); \ - } \ - static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \ - { \ - SCI_OUT(sci_size, sci_offset, value); \ - } - #if defined(CONFIG_CPU_SH3) || \ defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ -- cgit v0.10.2 From b03034016184b7e9fd19f2a24ffb131953fdcc41 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 8 Jun 2011 17:13:20 +0900 Subject: serial: sh-sci: Kill off some more unused definitions. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 923ebd9..ed1c09c 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -9,8 +9,6 @@ # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCIF0 0xA4400000 -# define SCIF2 0xA4410000 # define SCPCR 0xA4000116 # define SCPDR 0xA4000136 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ @@ -48,8 +46,6 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7343) # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7722) -# define PADR 0xA4050120 -# define PSDR 0xA405013e # define PWDR 0xA4050166 # define PSCR 0xA405011E # define SCIF_ORER 0x0001 /* overrun error bit */ -- cgit v0.10.2 From debf9507166eede1e676d27d3298cdfb27399cb4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 8 Jun 2011 18:19:37 +0900 Subject: serial: sh-sci: Generalize overrun handling. This consolidates all of the broken out overrun handling and ensures that we have sensible defaults per-port type, in addition to making sure that overruns are flagged appropriately in the error mask for parts that haven't explicitly disabled support for it. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 280c02a..bb27885 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -563,13 +563,19 @@ static int sci_handle_errors(struct uart_port *port) int copied = 0; unsigned short status = sci_in(port, SCxSR); struct tty_struct *tty = port->state->port.tty; + struct sci_port *s = to_sci_port(port); - if (status & SCxSR_ORER(port)) { - /* overrun error */ - if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) - copied++; + /* + * Handle overruns, if supported. + */ + if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { + if (status & (1 << s->cfg->overrun_bit)) { + /* overrun error */ + if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) + copied++; - dev_notice(port->dev, "overrun error"); + dev_notice(port->dev, "overrun error"); + } } if (status & SCxSR_FER(port)) { @@ -617,12 +623,19 @@ static int sci_handle_errors(struct uart_port *port) static int sci_handle_fifo_overrun(struct uart_port *port) { struct tty_struct *tty = port->state->port.tty; + struct sci_port *s = to_sci_port(port); int copied = 0; + /* + * XXX: Technically not limited to non-SCIFs, it's simply the + * SCLSR check that is for the moment SCIF-specific. This + * probably wants to be revisited for SCIFA/B as well as for + * factoring in SCI overrun detection. + */ if (port->type != PORT_SCIF) return 0; - if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { sci_out(port, SCLSR, 0); tty_insert_flip_char(tty, 0, TTY_OVERRUN); @@ -1755,6 +1768,32 @@ static int __devinit sci_init_single(struct platform_device *dev, sci_port->break_timer.function = sci_break_timer; init_timer(&sci_port->break_timer); + /* + * Establish some sensible defaults for the error detection. + */ + if (!p->error_mask) + p->error_mask = (p->type == PORT_SCI) ? + SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; + + /* + * Establish sensible defaults for the overrun detection, unless + * the part has explicitly disabled support for it. + */ + if (p->overrun_bit != SCIx_NOT_SUPPORTED) { + if (p->type == PORT_SCI) + p->overrun_bit = 5; + else if (p->scbrr_algo_id == SCBRR_ALGO_4) + p->overrun_bit = 9; + else + p->overrun_bit = 0; + + /* + * Make the error mask inclusive of overrun detection, if + * supported. + */ + p->error_mask |= (1 << p->overrun_bit); + } + sci_port->cfg = p; port->mapbase = p->mapbase; diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index ed1c09c..caab353 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -19,11 +19,9 @@ defined(CONFIG_ARCH_SH7372) # define PORT_PTCR 0xA405011EUL # define PORT_PVCR 0xA4050122UL -# define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ @@ -32,15 +30,12 @@ defined(CONFIG_CPU_SUBTYPE_SH7751R) # define SCSPTR1 0xffe0001c /* 8 bit SCI */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7760) # define SCSPTR0 0xfe600024 /* 16 bit SCIF */ # define SCSPTR1 0xfe610024 /* 16 bit SCIF */ # define SCSPTR2 0xfe620024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ # define PACR 0xa4050100 # define PBCR 0xa4050102 #elif defined(CONFIG_CPU_SUBTYPE_SH7343) @@ -48,35 +43,24 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7722) # define PWDR 0xA4050166 # define PSCR 0xA405011E -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7366) # define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ # define SCSPTR0 SCPDR0 -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7723) # define SCSPTR0 0xa4050160 -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7757) # define SCSPTR0 0xfe4b0020 -# define SCIF_ORER 0x0001 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SH7786) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ defined(CONFIG_CPU_SUBTYPE_SH7203) || \ defined(CONFIG_CPU_SUBTYPE_SH7206) || \ @@ -84,36 +68,12 @@ # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7619) # define SCSPTR0 0xf8400020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ #elif defined(CONFIG_CPU_SUBTYPE_SHX3) # define SCSPTR0 0xffc30020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ #else # error CPU subtype not defined #endif -/* SCxSR SCI */ -#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ - -#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER) - -/* SCxSR SCIF */ -#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ - #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ @@ -121,35 +81,27 @@ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) -# define SCIF_ORER 0x0200 -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) # define SCIF_RFDC_MASK 0x007f # define SCIF_TXROOM_MAX 64 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK ) # define SCIF_RFDC_MASK 0x007f # define SCIF_TXROOM_MAX 64 /* SH7763 SCIF2 support */ # define SCIF2_RFDC_MASK 0x001f # define SCIF2_TXROOM_MAX 16 #else -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) # define SCIF_RFDC_MASK 0x001f # define SCIF_TXROOM_MAX 16 #endif -#ifndef SCIF_ORER -#define SCIF_ORER 0x0000 -#endif - #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) -#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) #define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) #define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) #define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) -#define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) + +#define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask) #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index a2afc9f..5fac3bc 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -8,6 +8,8 @@ * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts) */ +#define SCIx_NOT_SUPPORTED (-1) + enum { SCBRR_ALGO_1, /* ((clk + 16 * bps) / (16 * bps) - 1) */ SCBRR_ALGO_2, /* ((clk + 16 * bps) / (32 * bps) - 1) */ @@ -25,6 +27,28 @@ enum { #define SCSCR_CKE1 (1 << 1) #define SCSCR_CKE0 (1 << 0) +/* SCxSR SCI */ +#define SCI_TDRE 0x80 +#define SCI_RDRF 0x40 +#define SCI_ORER 0x20 +#define SCI_FER 0x10 +#define SCI_PER 0x08 +#define SCI_TEND 0x04 + +#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) + +/* SCxSR SCIF */ +#define SCIF_ER 0x0080 +#define SCIF_TEND 0x0040 +#define SCIF_TDFE 0x0020 +#define SCIF_BRK 0x0010 +#define SCIF_FER 0x0008 +#define SCIF_PER 0x0004 +#define SCIF_RDF 0x0002 +#define SCIF_DR 0x0001 + +#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) + /* Offsets into the sci_port->irqs array */ enum { SCIx_ERI_IRQ, @@ -56,6 +80,12 @@ struct plat_sci_port { unsigned int scbrr_algo_id; /* SCBRR calculation algo */ unsigned int scscr; /* SCSCR initialization */ + /* + * Platform overrides if necessary, defaults otherwise. + */ + int overrun_bit; + unsigned int error_mask; + struct device *dma_dev; unsigned int dma_slave_tx; -- cgit v0.10.2 From 514820eb982eb85677ed2ecef9710e90e24fbdab Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 8 Jun 2011 18:51:32 +0900 Subject: serial: sh-sci: Consolidate RXD pin handling. Non-SCI parts do not have the special port reg necessary for cases where the RX and SCI pins are muxed and need to be manually polled, so these like always fall back on the normal FIFO processing paths. SH7760 is in a class in and of itself with regards to mapping its SIM card interface via the SCI port class despite not having any of the RXD lines wired up and so implicitly behaving more like a SCIF in this regard. Out of the other CPUs, some support the port check via the same block while others do it through an external SuperI/O, so it's not even possible to perform the check relative to the ioremapped cookie offset, so the separate read semantics are preserved here, too. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 4551ad6..6d54979 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -108,6 +108,7 @@ static struct platform_device rtc_device = { static struct plat_sci_port scif0_platform_data = { .mapbase = 0xfffffe80, + .port_reg = 0xa4000136, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index e53b4b3..8ea26e7 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -38,6 +38,7 @@ static struct platform_device rtc_device = { static struct plat_sci_port sci_platform_data = { .mapbase = 0xffe00000, + .port_reg = 0xffe0001C .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index bb27885..3248dda 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -363,6 +363,19 @@ static int sci_rxfill(struct uart_port *port) return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; } +/* + * SCI helper for checking the state of the muxed port/RXD pins. + */ +static inline int sci_rxd_in(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + if (s->cfg->port_reg <= 0) + return 1; + + return !!__raw_readb(s->cfg->port_reg); +} + /* ********************************************************************** * * the interrupt related routines * * ********************************************************************** */ diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index caab353..1c20f7f 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -287,32 +287,3 @@ SCIF_FNS(SCLSR, 0, 0, 0x24, 16) #endif #define sci_in(port, reg) sci_##reg##_in(port) #define sci_out(port, reg, value) sci_##reg##_out(port, value) - -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xfffffe80) - return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#else /* default case for non-SCI processors */ -static inline int sci_rxd_in(struct uart_port *port) -{ - return 1; -} -#endif diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 5fac3bc..ecefec7 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -86,6 +86,8 @@ struct plat_sci_port { int overrun_bit; unsigned int error_mask; + int port_reg; + struct device *dma_dev; unsigned int dma_slave_tx; -- cgit v0.10.2 From e13198894bf6308c097e5678ee315e12b2e1b7a8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 8 Jun 2011 19:13:06 +0900 Subject: serial: sh-sci: More unused define purging. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 1c20f7f..5834f33 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -2,15 +2,13 @@ #include #include -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7708) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCPCR 0xA4000116 -# define SCPDR 0xA4000136 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_ARCH_SH73A0) || \ @@ -19,20 +17,16 @@ defined(CONFIG_ARCH_SH7372) # define PORT_PTCR 0xA405011EUL # define PORT_PVCR 0xA4050122UL -#elif defined(CONFIG_SH_RTS7751R2D) -# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ -# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) -# define SCSPTR1 0xffe0001c /* 8 bit SCI */ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7760) # define SCSPTR0 0xfe600024 /* 16 bit SCIF */ -# define SCSPTR1 0xfe610024 /* 16 bit SCIF */ # define SCSPTR2 0xfe620024 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ @@ -48,16 +42,13 @@ # define SCSPTR0 SCPDR0 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) # define SCSPTR0 0xa4050160 -#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) -# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7757) # define SCSPTR0 0xfe4b0020 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) -# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SH7786) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ -- cgit v0.10.2 From c08957a2cf3c4a14e68d72c845d3c52cf3d826e1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 7 Jun 2011 23:36:18 +0100 Subject: regulator: Properly register dummy regulator driver Recent changes in the driver core appear to mean that the data structures for the driver core are not fully initialised unless the driver is bound. Make sure the driver core knows the dummy driver is in use by binding it to a driver. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c index c7410bd..f6ef669 100644 --- a/drivers/regulator/dummy.c +++ b/drivers/regulator/dummy.c @@ -36,6 +36,29 @@ static struct regulator_desc dummy_desc = { .ops = &dummy_ops, }; +static int __devinit dummy_regulator_probe(struct platform_device *pdev) +{ + int ret; + + dummy_regulator_rdev = regulator_register(&dummy_desc, NULL, + &dummy_initdata, NULL); + if (IS_ERR(dummy_regulator_rdev)) { + ret = PTR_ERR(dummy_regulator_rdev); + pr_err("Failed to register regulator: %d\n", ret); + return ret; + } + + return 0; +} + +static struct platform_driver dummy_regulator_driver = { + .probe = dummy_regulator_probe, + .driver = { + .name = "reg-dummy", + .owner = THIS_MODULE, + }, +}; + static struct platform_device *dummy_pdev; void __init regulator_dummy_init(void) @@ -55,12 +78,9 @@ void __init regulator_dummy_init(void) return; } - dummy_regulator_rdev = regulator_register(&dummy_desc, NULL, - &dummy_initdata, NULL); - if (IS_ERR(dummy_regulator_rdev)) { - ret = PTR_ERR(dummy_regulator_rdev); - pr_err("Failed to register regulator: %d\n", ret); + ret = platform_driver_register(&dummy_regulator_driver); + if (ret != 0) { + pr_err("Failed to register dummy regulator driver: %d\n", ret); platform_device_unregister(dummy_pdev); - return; } } -- cgit v0.10.2 From f5726ae33c382366ea1b23240d5620dcf675d81d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Jun 2011 16:22:20 +0100 Subject: regulator: Increase the limit on sysfs file names With verbose filenames we can easily hit 32 characters. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 7b38af9..75312bd 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1033,7 +1033,7 @@ static void unset_regulator_supplies(struct regulator_dev *rdev) } } -#define REG_STR_SIZE 32 +#define REG_STR_SIZE 64 static struct regulator *create_regulator(struct regulator_dev *rdev, struct device *dev, -- cgit v0.10.2 From e0eaedefda8e14ed3f445f382c568c5d69e4223f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Jun 2011 16:22:21 +0100 Subject: regulator: Include the device name in the microamps_requested_ file We may have multiple devices requesting a supply with the same name so include the device name in the generated filename for microamps_requested to avoid duplicate files. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 75312bd..e3b67ee 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1053,8 +1053,9 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, if (dev) { /* create a 'requested_microamps_name' sysfs entry */ - size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s", - supply_name); + size = scnprintf(buf, REG_STR_SIZE, + "microamps_requested_%s-%s", + dev_name(dev), supply_name); if (size >= REG_STR_SIZE) goto overflow_err; -- cgit v0.10.2 From 3801b86aa482d26a8ae460f67fca29e016491a86 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Jun 2011 16:22:22 +0100 Subject: regulator: Refactor supply implementation to work as regular consumers Currently the regulator supply implementation is somewhat complex and fragile as it doesn't look like standard consumers but is instead a parallel implementation. This causes issues with locking and reference counting. Move the implementation over to using standard consumers to address this. Rather than only notifying the supply on the first enable/disable we do so every time the regulator is enabled or disabled, simplifying locking as we don't need to hold a lock on the consumer we are about to enable. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index e3b67ee..f0cc398 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -82,8 +82,7 @@ struct regulator { }; static int _regulator_is_enabled(struct regulator_dev *rdev); -static int _regulator_disable(struct regulator_dev *rdev, - struct regulator_dev **supply_rdev_ptr); +static int _regulator_disable(struct regulator_dev *rdev); static int _regulator_get_voltage(struct regulator_dev *rdev); static int _regulator_get_current_limit(struct regulator_dev *rdev); static unsigned int _regulator_get_mode(struct regulator_dev *rdev); @@ -91,6 +90,9 @@ static void _notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); static int _regulator_do_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV); +static struct regulator *create_regulator(struct regulator_dev *rdev, + struct device *dev, + const char *supply_name); static const char *rdev_get_name(struct regulator_dev *rdev) { @@ -930,21 +932,20 @@ out: * core if it's child is enabled. */ static int set_supply(struct regulator_dev *rdev, - struct regulator_dev *supply_rdev) + struct regulator_dev *supply_rdev) { int err; - err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, - "supply"); - if (err) { - rdev_err(rdev, "could not add device link %s err %d\n", - supply_rdev->dev.kobj.name, err); - goto out; + rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev)); + + rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY"); + if (IS_ERR(rdev->supply)) { + err = PTR_ERR(rdev->supply); + rdev->supply = NULL; + return err; } - rdev->supply = supply_rdev; - list_add(&rdev->slist, &supply_rdev->supply_list); -out: - return err; + + return 0; } /** @@ -1303,19 +1304,6 @@ static int _regulator_enable(struct regulator_dev *rdev) { int ret, delay; - if (rdev->use_count == 0) { - /* do we need to enable the supply regulator first */ - if (rdev->supply) { - mutex_lock(&rdev->supply->mutex); - ret = _regulator_enable(rdev->supply); - mutex_unlock(&rdev->supply->mutex); - if (ret < 0) { - rdev_err(rdev, "failed to enable: %d\n", ret); - return ret; - } - } - } - /* check voltage and requested load before enabling */ if (rdev->constraints && (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) @@ -1390,19 +1378,27 @@ int regulator_enable(struct regulator *regulator) struct regulator_dev *rdev = regulator->rdev; int ret = 0; + if (rdev->supply) { + ret = regulator_enable(rdev->supply); + if (ret != 0) + return ret; + } + mutex_lock(&rdev->mutex); ret = _regulator_enable(rdev); mutex_unlock(&rdev->mutex); + + if (ret != 0) + regulator_disable(rdev->supply); + return ret; } EXPORT_SYMBOL_GPL(regulator_enable); /* locks held by regulator_disable() */ -static int _regulator_disable(struct regulator_dev *rdev, - struct regulator_dev **supply_rdev_ptr) +static int _regulator_disable(struct regulator_dev *rdev) { int ret = 0; - *supply_rdev_ptr = NULL; if (WARN(rdev->use_count <= 0, "unbalanced disables for %s\n", rdev_get_name(rdev))) @@ -1429,9 +1425,6 @@ static int _regulator_disable(struct regulator_dev *rdev, NULL); } - /* decrease our supplies ref count and disable if required */ - *supply_rdev_ptr = rdev->supply; - rdev->use_count = 0; } else if (rdev->use_count > 1) { @@ -1442,6 +1435,7 @@ static int _regulator_disable(struct regulator_dev *rdev, rdev->use_count--; } + return ret; } @@ -1460,29 +1454,21 @@ static int _regulator_disable(struct regulator_dev *rdev, int regulator_disable(struct regulator *regulator) { struct regulator_dev *rdev = regulator->rdev; - struct regulator_dev *supply_rdev = NULL; int ret = 0; mutex_lock(&rdev->mutex); - ret = _regulator_disable(rdev, &supply_rdev); + ret = _regulator_disable(rdev); mutex_unlock(&rdev->mutex); - /* decrease our supplies ref count and disable if required */ - while (supply_rdev != NULL) { - rdev = supply_rdev; - - mutex_lock(&rdev->mutex); - _regulator_disable(rdev, &supply_rdev); - mutex_unlock(&rdev->mutex); - } + if (ret == 0 && rdev->supply) + regulator_disable(rdev->supply); return ret; } EXPORT_SYMBOL_GPL(regulator_disable); /* locks held by regulator_force_disable() */ -static int _regulator_force_disable(struct regulator_dev *rdev, - struct regulator_dev **supply_rdev_ptr) +static int _regulator_force_disable(struct regulator_dev *rdev) { int ret = 0; @@ -1499,10 +1485,6 @@ static int _regulator_force_disable(struct regulator_dev *rdev, REGULATOR_EVENT_DISABLE, NULL); } - /* decrease our supplies ref count and disable if required */ - *supply_rdev_ptr = rdev->supply; - - rdev->use_count = 0; return ret; } @@ -1518,16 +1500,16 @@ static int _regulator_force_disable(struct regulator_dev *rdev, int regulator_force_disable(struct regulator *regulator) { struct regulator_dev *rdev = regulator->rdev; - struct regulator_dev *supply_rdev = NULL; int ret; mutex_lock(&rdev->mutex); regulator->uA_load = 0; - ret = _regulator_force_disable(rdev, &supply_rdev); + ret = _regulator_force_disable(regulator->rdev); mutex_unlock(&rdev->mutex); - if (supply_rdev) - regulator_disable(get_device_regulator(rdev_get_dev(supply_rdev))); + if (rdev->supply) + while (rdev->open_count--) + regulator_disable(rdev->supply); return ret; } @@ -2138,7 +2120,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) /* get input voltage */ input_uV = 0; if (rdev->supply) - input_uV = _regulator_get_voltage(rdev->supply); + input_uV = regulator_get_voltage(rdev->supply); if (input_uV <= 0) input_uV = rdev->constraints->input_uV; if (input_uV <= 0) { @@ -2208,17 +2190,8 @@ EXPORT_SYMBOL_GPL(regulator_unregister_notifier); static void _notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data) { - struct regulator_dev *_rdev; - /* call rdev chain first */ blocking_notifier_call_chain(&rdev->notifier, event, NULL); - - /* now notify regulator we supply */ - list_for_each_entry(_rdev, &rdev->supply_list, slist) { - mutex_lock(&_rdev->mutex); - _notifier_call_chain(_rdev, event, data); - mutex_unlock(&_rdev->mutex); - } } /** @@ -2610,9 +2583,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, rdev->owner = regulator_desc->owner; rdev->desc = regulator_desc; INIT_LIST_HEAD(&rdev->consumer_list); - INIT_LIST_HEAD(&rdev->supply_list); INIT_LIST_HEAD(&rdev->list); - INIT_LIST_HEAD(&rdev->slist); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); /* preform any regulator specific init */ @@ -2724,7 +2695,7 @@ void regulator_unregister(struct regulator_dev *rdev) unset_regulator_supplies(rdev); list_del(&rdev->list); if (rdev->supply) - sysfs_remove_link(&rdev->dev.kobj, "supply"); + regulator_put(rdev->supply); device_unregister(&rdev->dev); kfree(rdev->constraints); mutex_unlock(®ulator_list_mutex); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 6c433b8..1a80bc7 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -188,18 +188,16 @@ struct regulator_dev { /* lists we belong to */ struct list_head list; /* list of all regulators */ - struct list_head slist; /* list of supplied regulators */ /* lists we own */ struct list_head consumer_list; /* consumers we supply */ - struct list_head supply_list; /* regulators we supply */ struct blocking_notifier_head notifier; struct mutex mutex; /* consumer lock */ struct module *owner; struct device dev; struct regulation_constraints *constraints; - struct regulator_dev *supply; /* for tree */ + struct regulator *supply; /* for tree */ void *reg_data; /* regulator_dev data */ -- cgit v0.10.2 From 7d51a0dbe51282f3ed13cadf6e7f13a974374be2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Jun 2011 16:06:37 +0100 Subject: regulator: Add rdev_crit() macro No actual users but provide the macro so there's less surprise when it's not there. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f0cc398..cc3dfd6 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -34,6 +34,8 @@ #include "dummy.h" +#define rdev_crit(rdev, fmt, ...) \ + pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) #define rdev_err(rdev, fmt, ...) \ pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) #define rdev_warn(rdev, fmt, ...) \ -- cgit v0.10.2 From ea41b1e5440442cea5c029b192e9ebbe68e423f6 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 10 Jun 2011 10:14:03 -0400 Subject: ioctl-number.txt: add the tile hardwall ioctl range Signed-off-by: Chris Metcalf diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 3a46e36..b7dc374 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -292,6 +292,7 @@ Code Seq#(hex) Include File Comments 0xA0 all linux/sdp/sdp.h Industrial Device Project +0xA2 00-0F arch/tile/include/asm/hardwall.h 0xA3 80-8F Port ACL in development: 0xA3 90-9F linux/dtlk.h -- cgit v0.10.2 From dbcb4a1a3f16702918caa4d4ab7062965050a780 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 10 Jun 2011 13:07:48 -0400 Subject: arch/tile: add hypervisor-based character driver for SPI flash ROM The first version of this patch proposed an arch/tile/drivers/ directory, but the consensus was that this was probably a poor choice for a place to group Tilera-specific drivers, and that in any case grouping by platform was discouraged, and grouping by function was preferred. This version of the patch addresses various issues raised in the community, primarily the absence of sysfs integration. The sysfs integration now handles passing information on sector size, page size, and total partition size to userspace as well. In addition, we now use a single "struct cdev" to manage all the partition minor devices, and dynamically discover the correct number of partitions from the hypervisor rather than using a module_param with a default value. This driver has no particular "peer" drivers it can be grouped with. It is sort of like an MTD driver for SPI ROM, but it doesn't group well with the other MTD devices since it relies on hypervisor virtualization to handle many of the irritating aspects of flash ROM management: sector awareness, background read for sub-sector writes, bit examination to determine whether a sector erase needs to be issued, etc. It is in fact more like an EEPROM driver, but the hypervisor virtualization does require a "flush" command if you wish to commit a sector write prior to writing to a different sector, and this is sufficiently different from generic I2C/SPI EEPROMs that as a result it doesn't group well with them either. The simple character device is already in use by a range of Tilera SPI ROM management tools, as well as by customers. In addition, using the simple character device actually simplifies the userspace tools, since they don't need to manage sector erase, background read, etc. This both simplifies the code (since we can uniformly manage plain files and the SPI ROM) as well as makes the user code portable to non-Linux platforms that don't offer the same MTD ioctls. Signed-off-by: Chris Metcalf Reviewed-by: Arnd Bergmann diff --git a/arch/tile/include/hv/drv_srom_intf.h b/arch/tile/include/hv/drv_srom_intf.h new file mode 100644 index 0000000..6395faa --- /dev/null +++ b/arch/tile/include/hv/drv_srom_intf.h @@ -0,0 +1,41 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * @file drv_srom_intf.h + * Interface definitions for the SPI Flash ROM driver. + */ + +#ifndef _SYS_HV_INCLUDE_DRV_SROM_INTF_H +#define _SYS_HV_INCLUDE_DRV_SROM_INTF_H + +/** Read this offset to get the total device size. */ +#define SROM_TOTAL_SIZE_OFF 0xF0000000 + +/** Read this offset to get the device sector size. */ +#define SROM_SECTOR_SIZE_OFF 0xF0000004 + +/** Read this offset to get the device page size. */ +#define SROM_PAGE_SIZE_OFF 0xF0000008 + +/** Write this offset to flush any pending writes. */ +#define SROM_FLUSH_OFF 0xF1000000 + +/** Write this offset, plus the byte offset of the start of a sector, to + * erase a sector. Any write data is ignored, but there must be at least + * one byte of write data. Only applies when the driver is in MTD mode. + */ +#define SROM_ERASE_OFF 0xF2000000 + +#endif /* _SYS_HV_INCLUDE_DRV_SROM_INTF_H */ diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 49502bc..423fd56 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -616,5 +616,16 @@ config MSM_SMD_PKT Enables userspace clients to read and write to some packet SMD ports via device interface for MSM chipset. +config TILE_SROM + bool "Character-device access via hypervisor to the Tilera SPI ROM" + depends on TILE + default y + ---help--- + This device provides character-level read-write access + to the SROM, typically via the "0", "1", and "2" devices + in /dev/srom/. The Tilera hypervisor makes the flash + device appear much like a simple EEPROM, and knows + how to partition a single ROM for multiple purposes. + endmenu diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 7a00672..32762ba 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -63,3 +63,5 @@ obj-$(CONFIG_RAMOOPS) += ramoops.o obj-$(CONFIG_JS_RTC) += js-rtc.o js-rtc-y = rtc.o + +obj-$(CONFIG_TILE_SROM) += tile-srom.o diff --git a/drivers/char/tile-srom.c b/drivers/char/tile-srom.c new file mode 100644 index 0000000..cf3ee00 --- /dev/null +++ b/drivers/char/tile-srom.c @@ -0,0 +1,481 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * SPI Flash ROM driver + * + * This source code is derived from code provided in "Linux Device + * Drivers, Third Edition", by Jonathan Corbet, Alessandro Rubini, and + * Greg Kroah-Hartman, published by O'Reilly Media, Inc. + */ + +#include +#include +#include +#include /* printk() */ +#include /* kmalloc() */ +#include /* everything... */ +#include /* error codes */ +#include /* size_t */ +#include +#include /* O_ACCMODE */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Size of our hypervisor I/O requests. We break up large transfers + * so that we don't spend large uninterrupted spans of time in the + * hypervisor. Erasing an SROM sector takes a significant fraction of + * a second, so if we allowed the user to, say, do one I/O to write the + * entire ROM, we'd get soft lockup timeouts, or worse. + */ +#define SROM_CHUNK_SIZE ((size_t)4096) + +/* + * When hypervisor is busy (e.g. erasing), poll the status periodically. + */ + +/* + * Interval to poll the state in msec + */ +#define SROM_WAIT_TRY_INTERVAL 20 + +/* + * Maximum times to poll the state + */ +#define SROM_MAX_WAIT_TRY_TIMES 1000 + +struct srom_dev { + int hv_devhdl; /* Handle for hypervisor device */ + u32 total_size; /* Size of this device */ + u32 sector_size; /* Size of a sector */ + u32 page_size; /* Size of a page */ + struct mutex lock; /* Allow only one accessor at a time */ +}; + +static int srom_major; /* Dynamic major by default */ +module_param(srom_major, int, 0); +MODULE_AUTHOR("Tilera Corporation"); +MODULE_LICENSE("GPL"); + +static int srom_devs; /* Number of SROM partitions */ +static struct cdev srom_cdev; +static struct class *srom_class; +static struct srom_dev *srom_devices; + +/* + * Handle calling the hypervisor and managing EAGAIN/EBUSY. + */ + +static ssize_t _srom_read(int hv_devhdl, void *buf, + loff_t off, size_t count) +{ + int retval, retries = SROM_MAX_WAIT_TRY_TIMES; + for (;;) { + retval = hv_dev_pread(hv_devhdl, 0, (HV_VirtAddr)buf, + count, off); + if (retval >= 0) + return retval; + if (retval == HV_EAGAIN) + continue; + if (retval == HV_EBUSY && --retries > 0) { + msleep(SROM_WAIT_TRY_INTERVAL); + continue; + } + pr_err("_srom_read: error %d\n", retval); + return -EIO; + } +} + +static ssize_t _srom_write(int hv_devhdl, const void *buf, + loff_t off, size_t count) +{ + int retval, retries = SROM_MAX_WAIT_TRY_TIMES; + for (;;) { + retval = hv_dev_pwrite(hv_devhdl, 0, (HV_VirtAddr)buf, + count, off); + if (retval >= 0) + return retval; + if (retval == HV_EAGAIN) + continue; + if (retval == HV_EBUSY && --retries > 0) { + msleep(SROM_WAIT_TRY_INTERVAL); + continue; + } + pr_err("_srom_write: error %d\n", retval); + return -EIO; + } +} + +/** + * srom_open() - Device open routine. + * @inode: Inode for this device. + * @filp: File for this specific open of the device. + * + * Returns zero, or an error code. + */ +static int srom_open(struct inode *inode, struct file *filp) +{ + filp->private_data = &srom_devices[iminor(inode)]; + return 0; +} + + +/** + * srom_release() - Device release routine. + * @inode: Inode for this device. + * @filp: File for this specific open of the device. + * + * Returns zero, or an error code. + */ +static int srom_release(struct inode *inode, struct file *filp) +{ + struct srom_dev *srom = filp->private_data; + char dummy; + + /* Make sure we've flushed anything written to the ROM. */ + mutex_lock(&srom->lock); + if (srom->hv_devhdl >= 0) + _srom_write(srom->hv_devhdl, &dummy, SROM_FLUSH_OFF, 1); + mutex_unlock(&srom->lock); + + filp->private_data = NULL; + + return 0; +} + + +/** + * srom_read() - Read data from the device. + * @filp: File for this specific open of the device. + * @buf: User's data buffer. + * @count: Number of bytes requested. + * @f_pos: File position. + * + * Returns number of bytes read, or an error code. + */ +static ssize_t srom_read(struct file *filp, char __user *buf, + size_t count, loff_t *f_pos) +{ + int retval = 0; + void *kernbuf; + struct srom_dev *srom = filp->private_data; + + kernbuf = kmalloc(SROM_CHUNK_SIZE, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; + + if (mutex_lock_interruptible(&srom->lock)) { + retval = -ERESTARTSYS; + kfree(kernbuf); + return retval; + } + + while (count) { + int hv_retval; + int bytes_this_pass = min(count, SROM_CHUNK_SIZE); + + hv_retval = _srom_read(srom->hv_devhdl, kernbuf, + *f_pos, bytes_this_pass); + if (hv_retval > 0) { + if (copy_to_user(buf, kernbuf, hv_retval) != 0) { + retval = -EFAULT; + break; + } + } else if (hv_retval <= 0) { + if (retval == 0) + retval = hv_retval; + break; + } + + retval += hv_retval; + *f_pos += hv_retval; + buf += hv_retval; + count -= hv_retval; + } + + mutex_unlock(&srom->lock); + kfree(kernbuf); + + return retval; +} + +/** + * srom_write() - Write data to the device. + * @filp: File for this specific open of the device. + * @buf: User's data buffer. + * @count: Number of bytes requested. + * @f_pos: File position. + * + * Returns number of bytes written, or an error code. + */ +static ssize_t srom_write(struct file *filp, const char __user *buf, + size_t count, loff_t *f_pos) +{ + int retval = 0; + void *kernbuf; + struct srom_dev *srom = filp->private_data; + + kernbuf = kmalloc(SROM_CHUNK_SIZE, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; + + if (mutex_lock_interruptible(&srom->lock)) { + retval = -ERESTARTSYS; + kfree(kernbuf); + return retval; + } + + while (count) { + int hv_retval; + int bytes_this_pass = min(count, SROM_CHUNK_SIZE); + + if (copy_from_user(kernbuf, buf, bytes_this_pass) != 0) { + retval = -EFAULT; + break; + } + + hv_retval = _srom_write(srom->hv_devhdl, kernbuf, + *f_pos, bytes_this_pass); + if (hv_retval <= 0) { + if (retval == 0) + retval = hv_retval; + break; + } + + retval += hv_retval; + *f_pos += hv_retval; + buf += hv_retval; + count -= hv_retval; + } + + mutex_unlock(&srom->lock); + kfree(kernbuf); + + return retval; +} + +/* Provide our own implementation so we can use srom->total_size. */ +loff_t srom_llseek(struct file *filp, loff_t offset, int origin) +{ + struct srom_dev *srom = filp->private_data; + + if (mutex_lock_interruptible(&srom->lock)) + return -ERESTARTSYS; + + switch (origin) { + case SEEK_END: + offset += srom->total_size; + break; + case SEEK_CUR: + offset += filp->f_pos; + break; + } + + if (offset < 0 || offset > srom->total_size) { + offset = -EINVAL; + } else { + filp->f_pos = offset; + filp->f_version = 0; + } + + mutex_unlock(&srom->lock); + + return offset; +} + +static ssize_t total_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct srom_dev *srom = dev_get_drvdata(dev); + return sprintf(buf, "%u\n", srom->total_size); +} + +static ssize_t sector_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct srom_dev *srom = dev_get_drvdata(dev); + return sprintf(buf, "%u\n", srom->sector_size); +} + +static ssize_t page_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct srom_dev *srom = dev_get_drvdata(dev); + return sprintf(buf, "%u\n", srom->page_size); +} + +static struct device_attribute srom_dev_attrs[] = { + __ATTR(total_size, S_IRUGO, total_show, NULL), + __ATTR(sector_size, S_IRUGO, sector_show, NULL), + __ATTR(page_size, S_IRUGO, page_show, NULL), + __ATTR_NULL +}; + +static char *srom_devnode(struct device *dev, mode_t *mode) +{ + *mode = S_IRUGO | S_IWUSR; + return kasprintf(GFP_KERNEL, "srom/%s", dev_name(dev)); +} + +/* + * The fops + */ +static const struct file_operations srom_fops = { + .owner = THIS_MODULE, + .llseek = srom_llseek, + .read = srom_read, + .write = srom_write, + .open = srom_open, + .release = srom_release, +}; + +/** + * srom_setup_minor() - Initialize per-minor information. + * @srom: Per-device SROM state. + * @index: Device to set up. + */ +static int srom_setup_minor(struct srom_dev *srom, int index) +{ + struct device *dev; + int devhdl = srom->hv_devhdl; + + mutex_init(&srom->lock); + + if (_srom_read(devhdl, &srom->total_size, + SROM_TOTAL_SIZE_OFF, sizeof(srom->total_size)) < 0) + return -EIO; + if (_srom_read(devhdl, &srom->sector_size, + SROM_SECTOR_SIZE_OFF, sizeof(srom->sector_size)) < 0) + return -EIO; + if (_srom_read(devhdl, &srom->page_size, + SROM_PAGE_SIZE_OFF, sizeof(srom->page_size)) < 0) + return -EIO; + + dev = device_create(srom_class, &platform_bus, + MKDEV(srom_major, index), srom, "%d", index); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +/** srom_init() - Initialize the driver's module. */ +static int srom_init(void) +{ + int result, i; + dev_t dev = MKDEV(srom_major, 0); + + /* + * Start with a plausible number of partitions; the krealloc() call + * below will yield about log(srom_devs) additional allocations. + */ + srom_devices = kzalloc(4 * sizeof(struct srom_dev), GFP_KERNEL); + + /* Discover the number of srom partitions. */ + for (i = 0; ; i++) { + int devhdl; + char buf[20]; + struct srom_dev *new_srom_devices = + krealloc(srom_devices, (i+1) * sizeof(struct srom_dev), + GFP_KERNEL | __GFP_ZERO); + if (!new_srom_devices) { + result = -ENOMEM; + goto fail_mem; + } + srom_devices = new_srom_devices; + sprintf(buf, "srom/0/%d", i); + devhdl = hv_dev_open((HV_VirtAddr)buf, 0); + if (devhdl < 0) { + if (devhdl != HV_ENODEV) + pr_notice("srom/%d: hv_dev_open failed: %d.\n", + i, devhdl); + break; + } + srom_devices[i].hv_devhdl = devhdl; + } + srom_devs = i; + + /* Bail out early if we have no partitions at all. */ + if (srom_devs == 0) { + result = -ENODEV; + goto fail_mem; + } + + /* Register our major, and accept a dynamic number. */ + if (srom_major) + result = register_chrdev_region(dev, srom_devs, "srom"); + else { + result = alloc_chrdev_region(&dev, 0, srom_devs, "srom"); + srom_major = MAJOR(dev); + } + if (result < 0) + goto fail_mem; + + /* Register a character device. */ + cdev_init(&srom_cdev, &srom_fops); + srom_cdev.owner = THIS_MODULE; + srom_cdev.ops = &srom_fops; + result = cdev_add(&srom_cdev, dev, srom_devs); + if (result < 0) + goto fail_chrdev; + + /* Create a sysfs class. */ + srom_class = class_create(THIS_MODULE, "srom"); + if (IS_ERR(srom_class)) { + result = PTR_ERR(srom_class); + goto fail_cdev; + } + srom_class->dev_attrs = srom_dev_attrs; + srom_class->devnode = srom_devnode; + + /* Do per-partition initialization */ + for (i = 0; i < srom_devs; i++) { + result = srom_setup_minor(srom_devices + i, i); + if (result < 0) + goto fail_class; + } + + return 0; + +fail_class: + for (i = 0; i < srom_devs; i++) + device_destroy(srom_class, MKDEV(srom_major, i)); + class_destroy(srom_class); +fail_cdev: + cdev_del(&srom_cdev); +fail_chrdev: + unregister_chrdev_region(dev, srom_devs); +fail_mem: + kfree(srom_devices); + return result; +} + +/** srom_cleanup() - Clean up the driver's module. */ +static void srom_cleanup(void) +{ + int i; + for (i = 0; i < srom_devs; i++) + device_destroy(srom_class, MKDEV(srom_major, i)); + class_destroy(srom_class); + cdev_del(&srom_cdev); + unregister_chrdev_region(MKDEV(srom_major, 0), srom_devs); + kfree(srom_devices); +} + +module_init(srom_init); +module_exit(srom_cleanup); -- cgit v0.10.2 From 61a6976bf19a6cf5dfcf37c3536665b316f22d49 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 14 Jun 2011 12:40:19 +0900 Subject: serial: sh-sci: Abstract register maps. This takes a bit of a sledgehammer to the horribly CPU subtype ifdef-ridden header and abstracts all of the different register layouts in to distinct types which in turn can be overriden on a per-port basis, or permitted to default to the map matching the port type at probe time. In the process this ultimately fixes up inumerable bugs with mismatches on various CPU types (particularly the legacy ones that were obviously broken years ago and no one noticed) and provides a more tightly coupled and consolidated platform for extending and implementing generic features. Signed-off-by: Paul Mundt diff --git a/arch/sh/Makefile b/arch/sh/Makefile index e3d8170..99385d0 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -173,6 +173,7 @@ core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3 +cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5 cpuincdir-y += cpu-common # Must be last diff --git a/arch/sh/include/cpu-sh3/cpu/serial.h b/arch/sh/include/cpu-sh3/cpu/serial.h new file mode 100644 index 0000000..7766329 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/serial.h @@ -0,0 +1,10 @@ +#ifndef __CPU_SH3_SERIAL_H +#define __CPU_SH3_SERIAL_H + +#include + +extern struct plat_sci_port_ops sh770x_sci_port_ops; +extern struct plat_sci_port_ops sh7710_sci_port_ops; +extern struct plat_sci_port_ops sh7720_sci_port_ops; + +#endif /* __CPU_SH3_SERIAL_H */ diff --git a/arch/sh/include/cpu-sh4a/cpu/serial.h b/arch/sh/include/cpu-sh4a/cpu/serial.h new file mode 100644 index 0000000..ff1bc27 --- /dev/null +++ b/arch/sh/include/cpu-sh4a/cpu/serial.h @@ -0,0 +1,7 @@ +#ifndef __CPU_SH4A_SERIAL_H +#define __CPU_SH4A_SERIAL_H + +/* arch/sh/kernel/cpu/sh4a/serial-sh7722.c */ +extern struct plat_sci_port_ops sh7722_sci_port_ops; + +#endif /* __CPU_SH4A_SERIAL_H */ diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index ecab274..6f13f33 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -7,15 +7,15 @@ obj-y := ex.o probe.o entry.o setup-sh3.o obj-$(CONFIG_HIBERNATION) += swsusp.o # CPU subtype setup -obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o -obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o -obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o -obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o -obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o -obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o -obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o -obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o -obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o +obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o serial-sh7710.o +obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o serial-sh7710.o +obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o serial-sh7720.o +obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o serial-sh7720.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o diff --git a/arch/sh/kernel/cpu/sh3/serial-sh770x.c b/arch/sh/kernel/cpu/sh3/serial-sh770x.c new file mode 100644 index 0000000..4f7242c --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/serial-sh770x.c @@ -0,0 +1,33 @@ +#include +#include +#include +#include + +#define SCPCR 0xA4000116 +#define SCPDR 0xA4000136 + +static void sh770x_sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + /* We need to set SCPCR to enable RTS/CTS */ + data = __raw_readw(SCPCR); + /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ + __raw_writew(data & 0x0fcf, SCPCR); + + if (!(cflag & CRTSCTS)) { + /* We need to set SCPCR to enable RTS/CTS */ + data = __raw_readw(SCPCR); + /* Clear out SCP7MD1,0, SCP4MD1,0, + Set SCP6MD1,0 = {01} (output) */ + __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); + + data = __raw_readb(SCPDR); + /* Set /RTS2 (bit6) = 0 */ + __raw_writeb(data & 0xbf, SCPDR); + } +} + +struct plat_sci_port_ops sh770x_sci_port_ops = { + .init_pins = sh770x_sci_init_pins, +}; diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7710.c b/arch/sh/kernel/cpu/sh3/serial-sh7710.c new file mode 100644 index 0000000..42190ef --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/serial-sh7710.c @@ -0,0 +1,20 @@ +#include +#include +#include +#include + +#define PACR 0xa4050100 +#define PBCR 0xa4050102 + +static void sh7710_sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + if (port->mapbase == 0xA4400000) { + __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); + __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); + } else if (port->mapbase == 0xA4410000) + __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); +} + +struct plat_sci_port_ops sh7710_sci_port_ops = { + .init_pins = sh7710_sci_init_pins, +}; diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c new file mode 100644 index 0000000..8234e1e --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/serial-sh7720.c @@ -0,0 +1,36 @@ +#include +#include +#include +#include + +static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + if (cflag & CRTSCTS) { + /* enable RTS/CTS */ + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 9-2; enable all scif pins but sck */ + data = __raw_readw(PORT_PTCR); + __raw_writew((data & 0xfc03), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 9-2 */ + data = __raw_readw(PORT_PVCR); + __raw_writew((data & 0xfc03), PORT_PVCR); + } + } else { + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 5-2; enable only tx and rx */ + data = __raw_readw(PORT_PTCR); + __raw_writew((data & 0xffc3), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 5-2 */ + data = __raw_readw(PORT_PVCR); + __raw_writew((data & 0xffc3), PORT_PVCR); + } + } +} + +struct plat_sci_port_ops sh7720_sci_port_ops = { + .init_pins = sh7720_sci_init_pins, +}; diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index cd2e702..2309618 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -15,6 +15,7 @@ #include #include #include +#include enum { UNUSED = 0, @@ -75,6 +76,8 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIF, .irqs = { 56, 56, 56 }, + .ops = &sh770x_sci_port_ops, + .regtype = SCIx_SH7705_SCIF_REGTYPE, }; static struct platform_device scif0_device = { @@ -92,6 +95,8 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIF, .irqs = { 52, 52, 52 }, + .ops = &sh770x_sci_port_ops, + .regtype = SCIx_SH7705_SCIF_REGTYPE, }; static struct platform_device scif1_device = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 6d54979..3f3d5fe 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -19,6 +19,7 @@ #include #include #include +#include enum { UNUSED = 0, @@ -114,6 +115,8 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCI, .irqs = { 23, 23, 23, 0 }, + .ops = &sh770x_sci_port_ops, + .regshift = 1, }; static struct platform_device scif0_device = { @@ -133,6 +136,8 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 56, 56, 56, 56 }, + .ops = &sh770x_sci_port_ops, + .regtype = SCIx_SH3_SCIF_REGTYPE, }; static struct platform_device scif1_device = { @@ -147,11 +152,14 @@ static struct platform_device scif1_device = { defined(CONFIG_CPU_SUBTYPE_SH7709) static struct plat_sci_port scif2_platform_data = { .mapbase = 0xa4000140, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_IRDA, .irqs = { 52, 52, 52, 52 }, + .ops = &sh770x_sci_port_ops, + .regshift = 1, }; static struct platform_device scif2_device = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 365b94a6..9492034 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -20,6 +20,7 @@ #include #include #include +#include static struct resource rtc_resources[] = { [0] = { @@ -55,6 +56,8 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .ops = &sh7720_sci_port_ops, + .regtype = SCIx_SH7705_SCIF_REGTYPE, }; static struct platform_device scif0_device = { @@ -72,6 +75,8 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .ops = &sh7720_sci_port_ops, + .regtype = SCIx_SH7705_SCIF_REGTYPE, }; static struct platform_device scif1_device = { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 8ea26e7..c10db5b 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -1,5 +1,5 @@ /* - * SH7750/SH7751 Setup + * SH7091/SH7750/SH7750S/SH7750R/SH7751/SH7751R Setup * * Copyright (C) 2006 Paul Mundt * Copyright (C) 2006 Jamie Lenehan @@ -44,6 +44,7 @@ static struct plat_sci_port sci_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCI, .irqs = { 23, 23, 23, 0 }, + .regshift = 2, }; static struct platform_device sci_device = { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 78bbf23..c0b4c77 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -133,6 +133,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 52, 53, 55, 54 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -150,6 +151,7 @@ static struct plat_sci_port scif1_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .irqs = { 72, 73, 75, 74 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -167,6 +169,7 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 76, 77, 79, 78 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -184,6 +187,7 @@ static struct plat_sci_port scif3_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCI, .irqs = { 80, 81, 82, 0 }, + .regshift = 2, }; static struct platform_device scif3_device = { diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index cc122b1..c57fb28 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o intc-shx3.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o -obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o +obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o serial-sh7722.o obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o diff --git a/arch/sh/kernel/cpu/sh4a/serial-sh7722.c b/arch/sh/kernel/cpu/sh4a/serial-sh7722.c new file mode 100644 index 0000000..59bc3a7 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/serial-sh7722.c @@ -0,0 +1,23 @@ +#include +#include +#include + +#define PSCR 0xA405011E + +static void sh7722_sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + if (port->mapbase == 0xffe00000) { + data = __raw_readw(PSCR); + data &= ~0x03cf; + if (!(cflag & CRTSCTS)) + data |= 0x0340; + + __raw_writew(data, PSCR); + } +} + +struct plat_sci_port_ops sh7722_sci_port_ops = { + .init_pins = sh7722_sci_init_pins, +}; diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 82616af..8777386 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -20,6 +20,7 @@ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe00000, + .port_reg = 0xa405013e, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 5813d80..863249d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -185,6 +185,8 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .ops = &sh7722_sci_port_ops, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif0_device = { @@ -202,6 +204,8 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .ops = &sh7722_sci_port_ops, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif1_device = { @@ -219,6 +223,8 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .ops = &sh7722_sci_port_ops, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif2_device = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 0723822..3c2810d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -23,11 +23,13 @@ /* Serial */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe00000, + .port_reg = 0xa4050160, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif0_device = { @@ -40,11 +42,13 @@ static struct platform_device scif0_device = { static struct plat_sci_port scif1_platform_data = { .mapbase = 0xffe10000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif1_device = { @@ -57,11 +61,13 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .mapbase = 0xffe20000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif2_device = { @@ -75,6 +81,7 @@ static struct platform_device scif2_device = { static struct plat_sci_port scif3_platform_data = { .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, + .port_reg = SCIx_NOT_SUPPORTED, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_3, .type = PORT_SCIFA, @@ -91,6 +98,7 @@ static struct platform_device scif3_device = { static struct plat_sci_port scif4_platform_data = { .mapbase = 0xa4e40000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_3, @@ -108,6 +116,7 @@ static struct platform_device scif4_device = { static struct plat_sci_port scif5_platform_data = { .mapbase = 0xa4e50000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_3, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 0333fe9..8c89288 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -256,11 +256,13 @@ static struct platform_device dma1_device = { /* Serial */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe00000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif0_device = { @@ -273,11 +275,13 @@ static struct platform_device scif0_device = { static struct plat_sci_port scif1_platform_data = { .mapbase = 0xffe10000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif1_device = { @@ -290,11 +294,13 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .mapbase = 0xffe20000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif2_device = { @@ -307,6 +313,7 @@ static struct platform_device scif2_device = { static struct plat_sci_port scif3_platform_data = { .mapbase = 0xa4e30000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_3, @@ -324,6 +331,7 @@ static struct platform_device scif3_device = { static struct plat_sci_port scif4_platform_data = { .mapbase = 0xa4e40000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_3, @@ -341,6 +349,7 @@ static struct platform_device scif4_device = { static struct plat_sci_port scif5_platform_data = { .mapbase = 0xa4e50000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_3, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 593eca6..0011351 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -23,6 +23,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 40, 40, 40, 40 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -40,6 +41,7 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 76, 76, 76, 76 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -57,6 +59,7 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 104, 104, 104, 104 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 08add7f..3d4d207 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -14,7 +14,6 @@ #include #include #include - #include static struct plat_sci_port scif0_platform_data = { @@ -24,6 +23,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 40, 40, 40, 40 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -41,6 +41,7 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 76, 76, 76, 76 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 18d8fc1..b29e634 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -15,9 +15,7 @@ #include #include #include - #include - #include static struct plat_sci_port scif0_platform_data = { @@ -27,6 +25,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 40, 40, 40, 40 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -44,6 +43,7 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 44, 44, 44, 44 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -61,6 +61,7 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 60, 60, 60, 60 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -78,6 +79,7 @@ static struct plat_sci_port scif3_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 61, 61, 61, 61 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif3_device = { @@ -95,6 +97,7 @@ static struct plat_sci_port scif4_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 62, 62, 62, 62 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif4_device = { @@ -112,6 +115,7 @@ static struct plat_sci_port scif5_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 63, 63, 63, 63 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif5_device = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index beba32b..dd5e709 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -1,7 +1,7 @@ /* * SH7786 Setup * - * Copyright (C) 2009 - 2010 Renesas Solutions Corp. + * Copyright (C) 2009 - 2011 Renesas Solutions Corp. * Kuninori Morimoto * Paul Mundt * @@ -33,6 +33,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 40, 41, 43, 42 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -53,6 +54,7 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 44, 44, 44, 44 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -70,6 +72,7 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 50, 50, 50, 50 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -87,6 +90,7 @@ static struct plat_sci_port scif3_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 51, 51, 51, 51 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif3_device = { @@ -104,6 +108,7 @@ static struct plat_sci_port scif4_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 52, 52, 52, 52 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif4_device = { @@ -121,6 +126,7 @@ static struct plat_sci_port scif5_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 53, 53, 53, 53 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif5_device = { diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 3248dda..14e1bae 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -117,6 +117,255 @@ to_sci_port(struct uart_port *uart) return container_of(uart, struct sci_port, port); } +struct plat_sci_reg { + u8 offset, size; +}; + +/* Helper for invalidating specific entries of an inherited map. */ +#define sci_reg_invalid { .offset = 0, .size = 0 } + +static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { + [SCIx_PROBE_REGTYPE] = { + [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid, + }, + + /* + * Common SCI definitions, dependent on the port's regshift + * value. + */ + [SCIx_SCI_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x01, 8 }, + [SCSCR] = { 0x02, 8 }, + [SCxTDR] = { 0x03, 8 }, + [SCxSR] = { 0x04, 8 }, + [SCxRDR] = { 0x05, 8 }, + [SCFCR] = sci_reg_invalid, + [SCFDR] = sci_reg_invalid, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common definitions for legacy IrDA ports, dependent on + * regshift value. + */ + [SCIx_IRDA_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x01, 8 }, + [SCSCR] = { 0x02, 8 }, + [SCxTDR] = { 0x03, 8 }, + [SCxSR] = { 0x04, 8 }, + [SCxRDR] = { 0x05, 8 }, + [SCFCR] = { 0x06, 8 }, + [SCFDR] = { 0x07, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SCIFA definitions. + */ + [SCIx_SCIFA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x20, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x24, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SCIFB definitions. + */ + [SCIx_SCIFB_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x40, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x60, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SH-3 SCIF definitions. + */ + [SCIx_SH3_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SH-4(A) SCIF(B) definitions. + */ + [SCIx_SH4_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + + /* + * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR + * register. + */ + [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = { 0x24, 16 }, + }, + + /* + * Common SH-4(A) SCIF(B) definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */ + [SCRFDR] = { 0x20, 16 }, + [SCSPTR] = { 0x24, 16 }, + [SCLSR] = { 0x28, 16 }, + }, + + /* + * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR + * registers. + */ + [SCIx_SH7705_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x20, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x24, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, +}; + +/* + * The "offset" here is rather misleading, in that it refers to an enum + * value relative to the port mapping rather than the fixed offset + * itself, which needs to be manually retrieved from the platform's + * register map for the given port. + */ +static unsigned int sci_serial_in(struct uart_port *p, int offset) +{ + struct sci_port *s = to_sci_port(p); + struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + offset; + + if (reg->size == 8) + return ioread8(p->membase + (reg->offset << p->regshift)); + else if (reg->size == 16) + return ioread16(p->membase + (reg->offset << p->regshift)); + else + WARN(1, "Invalid register access\n"); + + return 0; +} + +static void sci_serial_out(struct uart_port *p, int offset, int value) +{ + struct sci_port *s = to_sci_port(p); + struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + offset; + + if (reg->size == 8) + iowrite8(value, p->membase + (reg->offset << p->regshift)); + else if (reg->size == 16) + iowrite16(value, p->membase + (reg->offset << p->regshift)); + else + WARN(1, "Invalid register access\n"); +} + +#define sci_in(up, offset) (up->serial_in(up, offset)) +#define sci_out(up, offset, value) (up->serial_out(up, offset, value)) + +static int sci_probe_regmap(struct plat_sci_port *cfg) +{ + switch (cfg->type) { + case PORT_SCI: + cfg->regtype = SCIx_SCI_REGTYPE; + break; + case PORT_IRDA: + cfg->regtype = SCIx_IRDA_REGTYPE; + break; + case PORT_SCIFA: + cfg->regtype = SCIx_SCIFA_REGTYPE; + break; + case PORT_SCIFB: + cfg->regtype = SCIx_SCIFB_REGTYPE; + break; + case PORT_SCIF: + /* + * The SH-4 is a bit of a misnomer here, although that's + * where this particular port layout originated. This + * configuration (or some slight variation thereof) + * remains the dominant model for all SCIFs. + */ + cfg->regtype = SCIx_SH4_SCIF_REGTYPE; + break; + default: + printk(KERN_ERR "Can't probe register map for given port\n"); + return -EINVAL; + } + + return 0; +} + #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) #ifdef CONFIG_CONSOLE_POLL @@ -160,103 +409,29 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (port->mapbase == 0xA4400000) { - __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); - __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); - } else if (port->mapbase == 0xA4410000) - __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - if (cflag & CRTSCTS) { - /* enable RTS/CTS */ - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 9-2; enable all scif pins but sck */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xfc03), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 9-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xfc03), PORT_PVCR); - } - } else { - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 5-2; enable only tx and rx */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xffc3), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 5-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xffc3), PORT_PVCR); - } - } -} -#elif defined(CONFIG_CPU_SH3) -/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +static void sci_init_pins(struct uart_port *port, unsigned int cflag) { - unsigned short data; - - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ - __raw_writew(data & 0x0fcf, SCPCR); - - if (!(cflag & CRTSCTS)) { - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP4MD1,0, - Set SCP6MD1,0 = {01} (output) */ - __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); + struct sci_port *s = to_sci_port(port); + struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; - data = __raw_readb(SCPDR); - /* Set /RTS2 (bit6) = 0 */ - __raw_writeb(data & 0xbf, SCPDR); + /* + * Use port-specific handler if provided. + */ + if (s->cfg->ops && s->cfg->ops->init_pins) { + s->cfg->ops->init_pins(port, cflag); + return; } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - if (port->mapbase == 0xffe00000) { - data = __raw_readw(PSCR); - data &= ~0x03cf; - if (!(cflag & CRTSCTS)) - data |= 0x0340; + /* + * For the generic path SCSPTR is necessary. Bail out if that's + * unavailable, too. + */ + if (!reg->size) + return; - __raw_writew(data, PSCR); - } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */ -} -#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */ + sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */ } -#else -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - /* Nothing to do */ -} -#endif #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ @@ -1752,6 +1927,9 @@ static int __devinit sci_init_single(struct platform_device *dev, break; } + if (p->regtype == SCIx_PROBE_REGTYPE) + BUG_ON(sci_probe_regmap(p) != 0); + if (dev) { sci_port->iclk = clk_get(&dev->dev, "sci_ick"); if (IS_ERR(sci_port->iclk)) { @@ -1812,9 +1990,10 @@ static int __devinit sci_init_single(struct platform_device *dev, port->mapbase = p->mapbase; port->type = p->type; port->flags = p->flags; + port->regshift = p->regshift; /* - * The UART port needs an IRQ value, so we peg this to the TX IRQ + * The UART port needs an IRQ value, so we peg this to the RX IRQ * for the multi-IRQ ports, which is where we are primarily * concerned with the shutdown path synchronization. * @@ -1822,6 +2001,9 @@ static int __devinit sci_init_single(struct platform_device *dev, */ port->irq = p->irqs[SCIx_RXI_IRQ]; + port->serial_in = sci_serial_in; + port->serial_out = sci_serial_out; + if (p->dma_dev) dev_dbg(port->dev, "DMA device %p, tx %d, rx %d\n", p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 5834f33..26de640 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -3,69 +3,6 @@ #include #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ -# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define PORT_PTCR 0xA405011EUL -# define PORT_PVCR 0xA4050122UL -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH4_202) -# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) -# define SCSPTR0 0xfe600024 /* 16 bit SCIF */ -# define SCSPTR2 0xfe620024 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -# define SCSPTR0 0xA4400000 /* 16 bit SCIF */ -# define PACR 0xa4050100 -# define PBCR 0xa4050102 -#elif defined(CONFIG_CPU_SUBTYPE_SH7343) -# define SCSPTR0 0xffe00010 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -# define PWDR 0xA4050166 -# define PSCR 0xA405011E -#elif defined(CONFIG_CPU_SUBTYPE_SH7366) -# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ -# define SCSPTR0 SCPDR0 -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) -# define SCSPTR0 0xa4050160 -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) -# define SCSPTR0 0xfe4b0020 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) -# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7770) -# define SCSPTR0 0xff923020 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -# define SCSPTR0 0xffea0024 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ - defined(CONFIG_CPU_SUBTYPE_SH7203) || \ - defined(CONFIG_CPU_SUBTYPE_SH7206) || \ - defined(CONFIG_CPU_SUBTYPE_SH7263) -# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) -# define SCSPTR0 0xf8400020 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SHX3) -# define SCSPTR0 0xffc30020 /* 16 bit SCIF */ -#else -# error CPU subtype not defined -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_ARCH_SH73A0) || \ @@ -119,162 +56,3 @@ #define SCI_MAJOR 204 #define SCI_MINOR_START 8 - -#define SCI_IN(size, offset) \ - ioread##size(port->membase + (offset)) - -#define SCI_OUT(size, offset, value) \ - iowrite##size(value, port->membase + (offset)) - -#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - return SCI_IN(scif_size, scif_offset); \ - } else { /* PORT_SCI or PORT_SCIFA */ \ - return SCI_IN(sci_size, sci_offset); \ - } \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_OUT(scif_size, scif_offset, value); \ - } else { /* PORT_SCI or PORT_SCIFA */ \ - SCI_OUT(sci_size, sci_offset, value); \ - } \ - } - -#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - return SCI_IN(scif_size, scif_offset); \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - SCI_OUT(scif_size, scif_offset, value); \ - } - -#if defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH7367) -#define SCIF_FNS(name, scif_offset, scif_size) \ - CPU_SCIF_FNS(name, scif_offset, scif_size) -#elif defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) || \ - defined(CONFIG_ARCH_SH73A0) -#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \ - CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) -#define SCIF_FNS(name, scif_offset, scif_size) \ - CPU_SCIF_FNS(name, scif_offset, scif_size) -#else -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) -#endif -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) - #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) - #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#else -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH7367) - -SCIF_FNS(SCSMR, 0x00, 16) -SCIF_FNS(SCBRR, 0x04, 8) -SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCxSR, 0x14, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCxTDR, 0x20, 8) -SCIF_FNS(SCxRDR, 0x24, 8) -SCIF_FNS(SCLSR, 0x00, 0) -#elif defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) || \ - defined(CONFIG_ARCH_SH73A0) -SCIF_FNS(SCSMR, 0x00, 16) -SCIF_FNS(SCBRR, 0x04, 8) -SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCTDSR, 0x0c, 16) -SCIF_FNS(SCFER, 0x10, 16) -SCIF_FNS(SCxSR, 0x14, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCTFDR, 0x38, 16) -SCIF_FNS(SCRFDR, 0x3c, 16) -SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8) -SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8) -SCIF_FNS(SCLSR, 0x00, 0) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) -SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) -SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8) -SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) -SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) -SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) -SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) -SCIx_FNS(SCSPTR, 0, 0, 0, 0) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCLSR, 0x24, 16) -#else -/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 */ -/* name off sz off sz off sz off sz */ -SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16) -SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8) -SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16) -SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8) -SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16) -SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8) -SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) -SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) -SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) -SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#else -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7722) -SCIF_FNS(SCSPTR, 0, 0, 0, 0) -#else -SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) -#endif -SCIF_FNS(SCLSR, 0, 0, 0x24, 16) -#endif -#endif -#define sci_in(port, reg) sci_##reg##_in(port) -#define sci_out(port, reg, value) sci_##reg##_out(port, value) diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index ecefec7..4ca130a 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -58,6 +58,22 @@ enum { SCIx_NR_IRQS, }; +enum { + SCIx_PROBE_REGTYPE, + + SCIx_SCI_REGTYPE, + SCIx_IRDA_REGTYPE, + SCIx_SCIFA_REGTYPE, + SCIx_SCIFB_REGTYPE, + SCIx_SH3_SCIF_REGTYPE, + SCIx_SH4_SCIF_REGTYPE, + SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, + SCIx_SH4_SCIF_FIFODATA_REGTYPE, + SCIx_SH7705_SCIF_REGTYPE, + + SCIx_NR_REGTYPES, +}; + #define SCIx_IRQ_MUXED(irq) \ { \ [SCIx_ERI_IRQ] = (irq), \ @@ -66,8 +82,24 @@ enum { [SCIx_BRI_IRQ] = (irq), \ } +/* + * SCI register subset common for all port types. + * Not all registers will exist on all parts. + */ +enum { + SCSMR, SCBRR, SCSCR, SCxSR, + SCFCR, SCFDR, SCxTDR, SCxRDR, + SCLSR, SCTFDR, SCRFDR, SCSPTR, + + SCIx_NR_REGS, +}; + struct device; +struct plat_sci_port_ops { + void (*init_pins)(struct uart_port *, unsigned int cflag); +}; + /* * Platform device specific platform_data struct */ @@ -87,6 +119,10 @@ struct plat_sci_port { unsigned int error_mask; int port_reg; + unsigned char regshift; + unsigned char regtype; + + struct plat_sci_port_ops *ops; struct device *dma_dev; -- cgit v0.10.2 From 72b294cf76dcd6d37891387049ddbe3c25043cb8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 14 Jun 2011 17:38:19 +0900 Subject: serial: sh-sci: FIFO sizing helper consolidation. This consolidates all of the TX/RX fill/room nonsense in to a single set of fairly heavyweight definitions. The implementation goes in descending order of complexity, testing the register map for capabilities until we run out of options and do it the legacy SCI way. Masks are derived directly from the per-port FIFO size, meaning that platforms with FIFO sizes not matching the standard port types will still need to manually fix them up. This also fixes up a number of issues such as tx_empty being completely bogus for SCI and IrDA ports, some ports using masks smaller or greater than their FIFO size, and so forth. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 14e1bae..60027d5 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -297,6 +297,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { }, }; +#define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset) + /* * The "offset" here is rather misleading, in that it refers to an enum * value relative to the port mapping rather than the fixed offset @@ -305,8 +307,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { */ static unsigned int sci_serial_in(struct uart_port *p, int offset) { - struct sci_port *s = to_sci_port(p); - struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + offset; + struct plat_sci_reg *reg = sci_getreg(p, offset); if (reg->size == 8) return ioread8(p->membase + (reg->offset << p->regshift)); @@ -320,8 +321,7 @@ static unsigned int sci_serial_in(struct uart_port *p, int offset) static void sci_serial_out(struct uart_port *p, int offset, int value) { - struct sci_port *s = to_sci_port(p); - struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + offset; + struct plat_sci_reg *reg = sci_getreg(p, offset); if (reg->size == 8) iowrite8(value, p->membase + (reg->offset << p->regshift)); @@ -433,108 +433,38 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag) sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */ } -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCTFDR) & 0xff; -} - -static int scif_txroom(struct uart_port *port) +static int sci_txfill(struct uart_port *port) { - return SCIF_TXROOM_MAX - scif_txfill(port); -} + struct plat_sci_reg *reg; -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCRFDR) & 0xff; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -static int scif_txfill(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ + reg = sci_getreg(port, SCTFDR); + if (reg->size) return sci_in(port, SCTFDR) & 0xff; - else - /* SCIF2 */ - return sci_in(port, SCFDR) >> 8; -} -static int scif_txroom(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ - return SCIF_TXROOM_MAX - scif_txfill(port); - else - /* SCIF2 */ - return SCIF2_TXROOM_MAX - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - if ((port->mapbase == 0xffe00000) || - (port->mapbase == 0xffe08000)) { - /* SCIF0/1*/ - return sci_in(port, SCRFDR) & 0xff; - } else { - /* SCIF2 */ - return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; - } -} -#elif defined(CONFIG_ARCH_SH7372) -static int scif_txfill(struct uart_port *port) -{ - if (port->type == PORT_SCIFA) + reg = sci_getreg(port, SCFDR); + if (reg->size) return sci_in(port, SCFDR) >> 8; - else - return sci_in(port, SCTFDR); -} - -static int scif_txroom(struct uart_port *port) -{ - return port->fifosize - scif_txfill(port); -} -static int scif_rxfill(struct uart_port *port) -{ - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; - else - return sci_in(port, SCRFDR); -} -#else -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) >> 8; -} - -static int scif_txroom(struct uart_port *port) -{ - return SCIF_TXROOM_MAX - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; -} -#endif - -static int sci_txfill(struct uart_port *port) -{ return !(sci_in(port, SCxSR) & SCI_TDRE); } static int sci_txroom(struct uart_port *port) { - return !sci_txfill(port); + return port->fifosize - sci_txfill(port); } static int sci_rxfill(struct uart_port *port) { + struct plat_sci_reg *reg; + + reg = sci_getreg(port, SCRFDR); + if (reg->size) + return sci_in(port, SCRFDR) & 0xff; + + reg = sci_getreg(port, SCFDR); + if (reg->size) + return sci_in(port, SCFDR) & ((port->fifosize << 1) - 1); + return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; } @@ -574,10 +504,7 @@ static void sci_transmit_chars(struct uart_port *port) return; } - if (port->type == PORT_SCI) - count = sci_txroom(port); - else - count = scif_txroom(port); + count = sci_txroom(port); do { unsigned char c; @@ -632,13 +559,8 @@ static void sci_receive_chars(struct uart_port *port) return; while (1) { - if (port->type == PORT_SCI) - count = sci_rxfill(port); - else - count = scif_rxfill(port); - /* Don't copy more bytes than there is room for in the buffer */ - count = tty_buffer_request_room(tty, count); + count = tty_buffer_request_room(tty, sci_rxfill(port)); /* If for any reason we can't copy more data, we're done! */ if (count == 0) @@ -1096,7 +1018,7 @@ static void sci_free_irq(struct sci_port *port) static unsigned int sci_tx_empty(struct uart_port *port) { unsigned short status = sci_in(port, SCxSR); - unsigned short in_tx_fifo = scif_txfill(port); + unsigned short in_tx_fifo = sci_txfill(port); return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; } diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 26de640..e9bed03 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -2,26 +2,6 @@ #include #include -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define SCIF_RFDC_MASK 0x007f -# define SCIF_TXROOM_MAX 64 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -# define SCIF_RFDC_MASK 0x007f -# define SCIF_TXROOM_MAX 64 -/* SH7763 SCIF2 support */ -# define SCIF2_RFDC_MASK 0x001f -# define SCIF2_TXROOM_MAX 16 -#else -# define SCIF_RFDC_MASK 0x001f -# define SCIF_TXROOM_MAX 16 -#endif - #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) -- cgit v0.10.2 From 4b8c59a3d83e9cf2b65b16999a0c704fc72de056 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 14 Jun 2011 17:53:34 +0900 Subject: serial: sh-sci: Support generic SCLSR overrun detection. For all ports with a valid SCLSR register we can use the generic FIFO overrun detection logic. Test the validity of the SCLSR register rather than depending explicitly on port type, which can be ambiguous for the SCIFA/B types. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 60027d5..8e55e0a 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -734,15 +734,11 @@ static int sci_handle_fifo_overrun(struct uart_port *port) { struct tty_struct *tty = port->state->port.tty; struct sci_port *s = to_sci_port(port); + struct plat_sci_reg *reg; int copied = 0; - /* - * XXX: Technically not limited to non-SCIFs, it's simply the - * SCLSR check that is for the moment SCIF-specific. This - * probably wants to be revisited for SCIFA/B as well as for - * factoring in SCI overrun detection. - */ - if (port->type != PORT_SCIF) + reg = sci_getreg(port, SCLSR); + if (!reg->size) return 0; if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { -- cgit v0.10.2 From cf8e98d15361f8c594da00a3f7a500787fc1a426 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 15 Jun 2011 10:35:38 -0400 Subject: arch/tile: remove useless set_fixmap_nocache() macro TILE doesn't support PAGE_KERNEL_NOCACHE so the macro isn't useful; it's a copy-and-paste from the first version of this header in 2007. Signed-off-by: Chris Metcalf diff --git a/arch/tile/include/asm/fixmap.h b/arch/tile/include/asm/fixmap.h index 51537ff..c66f793 100644 --- a/arch/tile/include/asm/fixmap.h +++ b/arch/tile/include/asm/fixmap.h @@ -75,12 +75,6 @@ extern void __set_fixmap(enum fixed_addresses idx, #define set_fixmap(idx, phys) \ __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) - #define clear_fixmap(idx) \ __set_fixmap(idx, 0, __pgprot(0)) -- cgit v0.10.2 From e2f5e5a71dfe6bf155590de0fdd6d748ac79bf76 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 10 Jun 2011 15:15:05 -0700 Subject: dma/ep93xx_dma.c: local symbols should be static The symbol 'ep93xx_dma_prep_dma_memcpy' is only used in this driver and should be marked static. Signed-off-by: H Hartley Sweeten Cc: Mika Westerberg Cc: Dan Williams Cc: Vinod Koul Acked-by: Mika Westerberg Signed-off-by: Vinod Koul diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index 0766c1e..5d7a49b 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -902,7 +902,7 @@ static void ep93xx_dma_free_chan_resources(struct dma_chan *chan) * * Returns a valid DMA descriptor or %NULL in case of failure. */ -struct dma_async_tx_descriptor * +static struct dma_async_tx_descriptor * ep93xx_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, size_t len, unsigned long flags) { -- cgit v0.10.2 From c4e0dd7835d12d9765a372b586a5020ac29cc706 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 16 Jun 2011 05:08:09 +0000 Subject: dmaengine: shdma: add to_sh_dev define This patch adds "to_sh_dev" macro, and clean up codes. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 2a638f9..d2fb16d 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -130,8 +130,7 @@ static bool dmae_is_busy(struct sh_dmae_chan *sh_chan) static unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan, u32 chcr) { - struct sh_dmae_device *shdev = container_of(sh_chan->common.device, - struct sh_dmae_device, common); + struct sh_dmae_device *shdev = to_sh_dev(sh_chan); struct sh_dmae_pdata *pdata = shdev->pdata; int cnt = ((chcr & pdata->ts_low_mask) >> pdata->ts_low_shift) | ((chcr & pdata->ts_high_mask) >> pdata->ts_high_shift); @@ -144,8 +143,7 @@ static unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan, u32 chcr) static u32 log2size_to_chcr(struct sh_dmae_chan *sh_chan, int l2size) { - struct sh_dmae_device *shdev = container_of(sh_chan->common.device, - struct sh_dmae_device, common); + struct sh_dmae_device *shdev = to_sh_dev(sh_chan); struct sh_dmae_pdata *pdata = shdev->pdata; int i; @@ -209,8 +207,7 @@ static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val) static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val) { - struct sh_dmae_device *shdev = container_of(sh_chan->common.device, - struct sh_dmae_device, common); + struct sh_dmae_device *shdev = to_sh_dev(sh_chan); struct sh_dmae_pdata *pdata = shdev->pdata; const struct sh_dmae_channel *chan_pdata = &pdata->channel[sh_chan->id]; u16 __iomem *addr = shdev->dmars; @@ -296,9 +293,7 @@ static struct sh_desc *sh_dmae_get_desc(struct sh_dmae_chan *sh_chan) static const struct sh_dmae_slave_config *sh_dmae_find_slave( struct sh_dmae_chan *sh_chan, struct sh_dmae_slave *param) { - struct dma_device *dma_dev = sh_chan->common.device; - struct sh_dmae_device *shdev = container_of(dma_dev, - struct sh_dmae_device, common); + struct sh_dmae_device *shdev = to_sh_dev(sh_chan); struct sh_dmae_pdata *pdata = shdev->pdata; int i; diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h index 5ae9fc51..6c73b65 100644 --- a/drivers/dma/shdma.h +++ b/drivers/dma/shdma.h @@ -52,5 +52,7 @@ struct sh_dmae_device { #define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, common) #define to_sh_desc(lh) container_of(lh, struct sh_desc, node) #define tx_to_sh_desc(tx) container_of(tx, struct sh_desc, async_tx) +#define to_sh_dev(chan) container_of(chan->common.device,\ + struct sh_dmae_device, common) #endif /* __DMA_SHDMA_H */ -- cgit v0.10.2 From 1d2c0980262e70f5643df34493ffd7e608282c16 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 16 Jun 2011 05:08:18 +0000 Subject: dmaengine: shdma: tidyup spin_unlock_bh on sh_chan_xfer_ld_queue It is not readable that there is any spin_unlock_bh on same function. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index d2fb16d..3d22eb8 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -766,10 +766,8 @@ static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan) spin_lock_bh(&sh_chan->desc_lock); /* DMA work check */ - if (dmae_is_busy(sh_chan)) { - spin_unlock_bh(&sh_chan->desc_lock); - return; - } + if (dmae_is_busy(sh_chan)) + goto sh_chan_xfer_ld_queue_end; /* Find the first not transferred descriptor */ list_for_each_entry(desc, &sh_chan->ld_queue, node) @@ -783,6 +781,7 @@ static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan) break; } +sh_chan_xfer_ld_queue_end: spin_unlock_bh(&sh_chan->desc_lock); } -- cgit v0.10.2 From 090b91805a97f58a7deff0f2b40aad1cc2f1b7e0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 16 Jun 2011 05:08:28 +0000 Subject: dmaengine: shdma: fixup parameter definition on dmae_set_dmars chan_pdata->dmars_bit is unsigned int Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 3d22eb8..41a21b3 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -211,7 +211,7 @@ static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val) struct sh_dmae_pdata *pdata = shdev->pdata; const struct sh_dmae_channel *chan_pdata = &pdata->channel[sh_chan->id]; u16 __iomem *addr = shdev->dmars; - int shift = chan_pdata->dmars_bit; + unsigned int shift = chan_pdata->dmars_bit; if (dmae_is_busy(sh_chan)) return -EBUSY; -- cgit v0.10.2 From 08ef2e427b59393d68a65b16e97e894b662a5573 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Jun 2011 12:24:53 +0900 Subject: sh: Fix up build fallout from serial merge. This fixes up build issues for SH7720/SH7722/SH7750 that crept in with the serial rework. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c index 8234e1e..8832c52 100644 --- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/serial-sh7720.c @@ -2,6 +2,7 @@ #include #include #include +#include static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag) { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index c10db5b..98cc0c7 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -38,7 +38,7 @@ static struct platform_device rtc_device = { static struct plat_sci_port sci_platform_data = { .mapbase = 0xffe00000, - .port_reg = 0xffe0001C + .port_reg = 0xffe0001C, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 863249d..278a0e5 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -22,6 +22,7 @@ #include #include +#include static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = { { -- cgit v0.10.2 From 5899a723b336da241b492583d7e55f1055f8f3b3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:20:40 +0000 Subject: dmaengine: shdma: add chcr_write/read function CHCR register position is not same in all DMAC. This patch adds new "chcr_offset" to decide it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 41a21b3..40900c1 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -78,6 +78,20 @@ static void dmaor_write(struct sh_dmae_device *shdev, u16 data) __raw_writew(data, shdev->chan_reg + DMAOR / sizeof(u32)); } +static void chcr_write(struct sh_dmae_chan *sh_dc, u32 data) +{ + struct sh_dmae_device *shdev = to_sh_dev(sh_dc); + + __raw_writel(data, sh_dc->base + shdev->chcr_offset / sizeof(u32)); +} + +static u32 chcr_read(struct sh_dmae_chan *sh_dc) +{ + struct sh_dmae_device *shdev = to_sh_dev(sh_dc); + + return __raw_readl(sh_dc->base + shdev->chcr_offset / sizeof(u32)); +} + /* * Reset DMA controller * @@ -120,7 +134,7 @@ static int sh_dmae_rst(struct sh_dmae_device *shdev) static bool dmae_is_busy(struct sh_dmae_chan *sh_chan) { - u32 chcr = sh_dmae_readl(sh_chan, CHCR); + u32 chcr = chcr_read(sh_chan); if ((chcr & (CHCR_DE | CHCR_TE)) == CHCR_DE) return true; /* working */ @@ -167,18 +181,18 @@ static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw) static void dmae_start(struct sh_dmae_chan *sh_chan) { - u32 chcr = sh_dmae_readl(sh_chan, CHCR); + u32 chcr = chcr_read(sh_chan); chcr |= CHCR_DE | CHCR_IE; - sh_dmae_writel(sh_chan, chcr & ~CHCR_TE, CHCR); + chcr_write(sh_chan, chcr & ~CHCR_TE); } static void dmae_halt(struct sh_dmae_chan *sh_chan) { - u32 chcr = sh_dmae_readl(sh_chan, CHCR); + u32 chcr = chcr_read(sh_chan); chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE); - sh_dmae_writel(sh_chan, chcr, CHCR); + chcr_write(sh_chan, chcr); } static void dmae_init(struct sh_dmae_chan *sh_chan) @@ -190,7 +204,7 @@ static void dmae_init(struct sh_dmae_chan *sh_chan) u32 chcr = DM_INC | SM_INC | 0x400 | log2size_to_chcr(sh_chan, LOG2_DEFAULT_XFER_SIZE); sh_chan->xmit_shift = calc_xmit_shift(sh_chan, chcr); - sh_dmae_writel(sh_chan, chcr, CHCR); + chcr_write(sh_chan, chcr); } static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val) @@ -200,7 +214,7 @@ static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val) return -EBUSY; sh_chan->xmit_shift = calc_xmit_shift(sh_chan, val); - sh_dmae_writel(sh_chan, val, CHCR); + chcr_write(sh_chan, val); return 0; } @@ -840,7 +854,7 @@ static irqreturn_t sh_dmae_interrupt(int irq, void *data) spin_lock(&sh_chan->desc_lock); - chcr = sh_dmae_readl(sh_chan, CHCR); + chcr = chcr_read(sh_chan); if (chcr & CHCR_TE) { /* DMA stop */ @@ -1138,6 +1152,11 @@ static int __init sh_dmae_probe(struct platform_device *pdev) /* platform data */ shdev->pdata = pdata; + if (pdata->chcr_offset) + shdev->chcr_offset = pdata->chcr_offset; + else + shdev->chcr_offset = CHCR; + platform_set_drvdata(pdev, shdev); pm_runtime_enable(&pdev->dev); diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h index 6c73b65..6f064ca 100644 --- a/drivers/dma/shdma.h +++ b/drivers/dma/shdma.h @@ -47,6 +47,7 @@ struct sh_dmae_device { struct list_head node; u32 __iomem *chan_reg; u16 __iomem *dmars; + unsigned int chcr_offset; }; #define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, common) diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index b08cd4e..41fe4c2 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -62,6 +62,7 @@ struct sh_dmae_pdata { const unsigned int *ts_shift; int ts_shift_num; u16 dmaor_init; + unsigned int chcr_offset; }; /* DMA register */ -- cgit v0.10.2 From 67c6269e5c998b53c2c08ce2befbbe20a7b6f57f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:20:51 +0000 Subject: dmaengine: shdma: add chcr_ie_bit IE bit position on CHCR register is not same in all DMAC. This patch adds new "chcr_ie_bit" to decide it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 40900c1..9412de3 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -181,17 +181,19 @@ static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw) static void dmae_start(struct sh_dmae_chan *sh_chan) { + struct sh_dmae_device *shdev = to_sh_dev(sh_chan); u32 chcr = chcr_read(sh_chan); - chcr |= CHCR_DE | CHCR_IE; + chcr |= CHCR_DE | shdev->chcr_ie_bit; chcr_write(sh_chan, chcr & ~CHCR_TE); } static void dmae_halt(struct sh_dmae_chan *sh_chan) { + struct sh_dmae_device *shdev = to_sh_dev(sh_chan); u32 chcr = chcr_read(sh_chan); - chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE); + chcr &= ~(CHCR_DE | CHCR_TE | shdev->chcr_ie_bit); chcr_write(sh_chan, chcr); } @@ -1157,6 +1159,11 @@ static int __init sh_dmae_probe(struct platform_device *pdev) else shdev->chcr_offset = CHCR; + if (pdata->chcr_ie_bit) + shdev->chcr_ie_bit = pdata->chcr_ie_bit; + else + shdev->chcr_ie_bit = CHCR_IE; + platform_set_drvdata(pdev, shdev); pm_runtime_enable(&pdev->dev); diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h index 6f064ca..dc56576 100644 --- a/drivers/dma/shdma.h +++ b/drivers/dma/shdma.h @@ -48,6 +48,7 @@ struct sh_dmae_device { u32 __iomem *chan_reg; u16 __iomem *dmars; unsigned int chcr_offset; + u32 chcr_ie_bit; }; #define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, common) diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 41fe4c2..96803aa 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -63,6 +63,7 @@ struct sh_dmae_pdata { int ts_shift_num; u16 dmaor_init; unsigned int chcr_offset; + u32 chcr_ie_bit; }; /* DMA register */ -- cgit v0.10.2 From e76c3af873025f5a704d56a28882be761e15657b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:20:56 +0000 Subject: dmaengine: shdma: add dmaor_is_32bit flag Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 9412de3..6a21cd8 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -70,12 +70,22 @@ static u32 sh_dmae_readl(struct sh_dmae_chan *sh_dc, u32 reg) static u16 dmaor_read(struct sh_dmae_device *shdev) { - return __raw_readw(shdev->chan_reg + DMAOR / sizeof(u32)); + u32 __iomem *addr = shdev->chan_reg + DMAOR / sizeof(u32); + + if (shdev->pdata->dmaor_is_32bit) + return __raw_readl(addr); + else + return __raw_readw(addr); } static void dmaor_write(struct sh_dmae_device *shdev, u16 data) { - __raw_writew(data, shdev->chan_reg + DMAOR / sizeof(u32)); + u32 __iomem *addr = shdev->chan_reg + DMAOR / sizeof(u32); + + if (shdev->pdata->dmaor_is_32bit) + __raw_writel(data, addr); + else + __raw_writew(data, addr); } static void chcr_write(struct sh_dmae_chan *sh_dc, u32 data) diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 96803aa..f25afc6 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -64,6 +64,8 @@ struct sh_dmae_pdata { u16 dmaor_init; unsigned int chcr_offset; u32 chcr_ie_bit; + + unsigned int dmaor_is_32bit:1; }; /* DMA register */ -- cgit v0.10.2 From 260bf2c5f69f419b04b6861ca91565b5fb16ce48 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:21:05 +0000 Subject: dmaengine: shdma: add .needs_tend_set / .no_dmars flags Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 6a21cd8..0f3ec8d 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -194,6 +194,9 @@ static void dmae_start(struct sh_dmae_chan *sh_chan) struct sh_dmae_device *shdev = to_sh_dev(sh_chan); u32 chcr = chcr_read(sh_chan); + if (shdev->pdata->needs_tend_set) + sh_dmae_writel(sh_chan, 0xFFFFFFFF, TEND); + chcr |= CHCR_DE | shdev->chcr_ie_bit; chcr_write(sh_chan, chcr & ~CHCR_TE); } @@ -242,6 +245,9 @@ static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val) if (dmae_is_busy(sh_chan)) return -EBUSY; + if (pdata->no_dmars) + return 0; + /* in the case of a missing DMARS resource use first memory window */ if (!addr) addr = (u16 __iomem *)shdev->chan_reg; diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index f25afc6..cb2dd11 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -66,6 +66,8 @@ struct sh_dmae_pdata { u32 chcr_ie_bit; unsigned int dmaor_is_32bit:1; + unsigned int needs_tend_set:1; + unsigned int no_dmars:1; }; /* DMA register */ @@ -75,6 +77,8 @@ struct sh_dmae_pdata { #define CHCR 0x0C #define DMAOR 0x40 +#define TEND 0x18 /* USB-DMAC */ + /* DMAOR definitions */ #define DMAOR_AE 0x00000004 #define DMAOR_NMIF 0x00000002 -- cgit v0.10.2 From 794d78fea51504bad3880d14f354a9847f318f25 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 21 Jun 2011 07:55:12 +0000 Subject: drivers: sh: late disabling of clocks V2 This V2 patch changes the clock disabling behavior during boot. Two different changes are made: 1) Delay disabling of clocks until late in the boot process. This fixes an existing issue where in-use clocks without software reference are disabled by mistake during boot. One example of this is the handling of the Mackerel serial console output that shares clock with the I2C controller. 2) Write out the "disabled" state to the hardware for clocks that not have been used by the kernel. In other words, make sure so far unused clocks actually get turned off. Signed-off-by: Magnus Damm Acked-by: Simon Horman Signed-off-by: Paul Mundt diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 7e9c399..ebeaa9e 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -34,6 +34,9 @@ static LIST_HEAD(clock_list); static DEFINE_SPINLOCK(clock_lock); static DEFINE_MUTEX(clock_list_sem); +/* clock disable operations are not passed on to hardware during boot */ +static int allow_disable; + void clk_rate_table_build(struct clk *clk, struct cpufreq_frequency_table *freq_table, int nr_freqs, @@ -228,7 +231,7 @@ static void __clk_disable(struct clk *clk) return; if (!(--clk->usecount)) { - if (likely(clk->ops && clk->ops->disable)) + if (likely(allow_disable && clk->ops && clk->ops->disable)) clk->ops->disable(clk); if (likely(clk->parent)) __clk_disable(clk->parent); @@ -747,3 +750,25 @@ err_out: return err; } late_initcall(clk_debugfs_init); + +static int __init clk_late_init(void) +{ + unsigned long flags; + struct clk *clk; + + /* disable all clocks with zero use count */ + mutex_lock(&clock_list_sem); + spin_lock_irqsave(&clock_lock, flags); + + list_for_each_entry(clk, &clock_list, node) + if (!clk->usecount && clk->ops && clk->ops->disable) + clk->ops->disable(clk); + + /* from now on allow clock disable operations */ + allow_disable = 1; + + spin_unlock_irqrestore(&clock_lock, flags); + mutex_unlock(&clock_list_sem); + return 0; +} +late_initcall(clk_late_init); -- cgit v0.10.2 From 225ca45c3c64964163ea1fa85e2081af85956eed Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Jun 2011 17:35:40 +0900 Subject: sh: clkfwk: Convert to IS_ERR_OR_NULL. Trivial cleanup. Signed-off-by: Paul Mundt diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index ebeaa9e..229ad09 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -396,7 +396,7 @@ int clk_register(struct clk *clk) { int ret; - if (clk == NULL || IS_ERR(clk)) + if (IS_ERR_OR_NULL(clk)) return -EINVAL; /* -- cgit v0.10.2 From 7912825d8b755e6a5b9839eab910f451b0271aba Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Jun 2011 17:36:23 +0900 Subject: sh: Tidy up pre-clkdev clk_get() error handling. clk_get() used to return NULL or an errno value depending on whether a clkdev lookup failed or a clock wasn't found in the primary clock list. As these disjoint paths were unified and everything now is handled via clkdev lookups, the NULL case never makes it out of clk_get(). Update accordingly and always look to the errno value. Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c index 8e2a270..2823619 100644 --- a/arch/sh/boards/board-apsh4a3a.c +++ b/arch/sh/boards/board-apsh4a3a.c @@ -116,7 +116,7 @@ static int apsh4a3a_clk_init(void) int ret; clk = clk_get(NULL, "extal"); - if (!clk || IS_ERR(clk)) + if (IS_ERR(clk)) return PTR_ERR(clk); ret = clk_set_rate(clk, 33333000); clk_put(clk); diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c index e2bd218..b4d6292 100644 --- a/arch/sh/boards/board-apsh4ad0a.c +++ b/arch/sh/boards/board-apsh4ad0a.c @@ -94,7 +94,7 @@ static int apsh4ad0a_clk_init(void) int ret; clk = clk_get(NULL, "extal"); - if (!clk || IS_ERR(clk)) + if (IS_ERR(clk)) return PTR_ERR(clk); ret = clk_set_rate(clk, 33333000); clk_put(clk); diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index ee65ff0..d879848 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -299,7 +299,7 @@ static int sh7785lcr_clk_init(void) int ret; clk = clk_get(NULL, "extal"); - if (!clk || IS_ERR(clk)) + if (IS_ERR(clk)) return PTR_ERR(clk); ret = clk_set_rate(clk, 33333333); clk_put(clk); diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index d81c609..24e3316 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -190,7 +190,7 @@ static int urquell_clk_init(void) return -EINVAL; clk = clk_get(NULL, "extal"); - if (!clk || IS_ERR(clk)) + if (IS_ERR(clk)) return PTR_ERR(clk); ret = clk_set_rate(clk, 33333333); clk_put(clk); diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 1521aa7..486d1ac 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -194,7 +194,7 @@ static int sdk7786_clk_init(void) return -EINVAL; clk = clk_get(NULL, "extal"); - if (!clk || IS_ERR(clk)) + if (IS_ERR(clk)) return PTR_ERR(clk); ret = clk_set_rate(clk, 33333333); clk_put(clk); -- cgit v0.10.2 From a03a202e95fdaa3ff52ccfc2594ec531e5917816 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 20 Jun 2011 17:02:47 +0200 Subject: dmaengine: failure to get a specific DMA channel is not critical There exist systems with multiple DMA controllers with different capabilities. For example, on some sh-mobile / rmobile systems there are DMA controllers, whose channels can be configured to be used with SD- and MMC-host controllers, serial ports etc. Besides there are also DMA controllers, that can only be used for one special function, e.g., for USB. In such cases the DMA client filter function can just choose to specify to the DMA driver, which channel it needs. Then the .device_alloc_chan_resources() method of the DMA driver will check, whether it can provide that dunction. If not, it will fail and the loop in __dma_request_channel() will continue to the next DMA device, until it finds a suitable one. This works fine with just one minor glitch: the kernel logs error messages like dmaengine: failed to get : (-) after each such non-critical failure. This patch lowers priority of this message to the debug level. Reported-by: Kuninori Morimoto Signed-off-by: Guennadi Liakhovetski Tested-by: Kuninori Morimoto Tested-by: Magnus Damm Signed-off-by: Vinod Koul diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 8bcb15f..f7f21a5 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -509,8 +509,8 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v dma_chan_name(chan)); list_del_rcu(&device->global_node); } else if (err) - pr_err("dmaengine: failed to get %s: (%d)\n", - dma_chan_name(chan), err); + pr_debug("dmaengine: failed to get %s: (%d)\n", + dma_chan_name(chan), err); else break; if (--device->privatecnt == 0) -- cgit v0.10.2 From d3ad8434aa83ef7c88bc91edcfe012cdcbab9f3e Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 27 Jun 2011 12:36:29 -0400 Subject: jbd2: use WRITE_SYNC in journal checkpoint In journal checkpoint, we write the buffer and wait for its finish. But in cfq, the async queue has a very low priority, and in our test, if there are too many sync queues and every queue is filled up with requests, the write request will be delayed for quite a long time and all the tasks which are waiting for journal space will end with errors like: INFO: task attr_set:3816 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. attr_set D ffff880028393480 0 3816 1 0x00000000 ffff8802073fbae8 0000000000000086 ffff8802140847c8 ffff8800283934e8 ffff8802073fb9d8 ffffffff8103e456 ffff8802140847b8 ffff8801ed728080 ffff8801db4bc080 ffff8801ed728450 ffff880028393480 0000000000000002 Call Trace: [] ? __dequeue_entity+0x33/0x38 [] ? need_resched+0x23/0x2d [] ? thread_return+0xa2/0xbc [] ? jbd2_journal_dirty_metadata+0x116/0x126 [jbd2] [] ? jbd2_journal_dirty_metadata+0x116/0x126 [jbd2] [] __mutex_lock_common+0x14e/0x1a9 [] ? brelse+0x13/0x15 [ext4] [] __mutex_lock_slowpath+0x19/0x1b [] mutex_lock+0x1b/0x32 [] __jbd2_journal_insert_checkpoint+0xe3/0x20c [jbd2] [] start_this_handle+0x438/0x527 [jbd2] [] ? autoremove_wake_function+0x0/0x3e [] jbd2_journal_start+0xa1/0xcc [jbd2] [] ext4_journal_start_sb+0x57/0x81 [ext4] [] ext4_xattr_set+0x6c/0xe3 [ext4] [] ext4_xattr_user_set+0x42/0x4b [ext4] [] generic_setxattr+0x6b/0x76 [] __vfs_setxattr_noperm+0x47/0xc0 [] vfs_setxattr+0x7f/0x9a [] setxattr+0xb5/0xe8 [] ? do_filp_open+0x571/0xa6e [] sys_fsetxattr+0x6b/0x91 [] system_call_fastpath+0x16/0x1b So this patch tries to use WRITE_SYNC in __flush_batch so that the request will be moved into sync queue and handled by cfq timely. We also use the new plug, sot that all the WRITE_SYNC requests can be given as a whole when we unplug it. Signed-off-by: Tao Ma Signed-off-by: "Theodore Ts'o" Cc: Jan Kara Reported-by: Robin Dong diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 2c62c5a..16a698b 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -257,9 +257,12 @@ static void __flush_batch(journal_t *journal, int *batch_count) { int i; + struct blk_plug plug; + blk_start_plug(&plug); for (i = 0; i < *batch_count; i++) - write_dirty_buffer(journal->j_chkpt_bhs[i], WRITE); + write_dirty_buffer(journal->j_chkpt_bhs[i], WRITE_SYNC); + blk_finish_plug(&plug); for (i = 0; i < *batch_count; i++) { struct buffer_head *bh = journal->j_chkpt_bhs[i]; -- cgit v0.10.2 From ed7a7e16724a4123fce1fc0ff1f5131a0596f189 Mon Sep 17 00:00:00 2001 From: Robin Dong Date: Mon, 27 Jun 2011 15:35:53 -0400 Subject: ext4: fix incorrect error msg in ext4_ext_insert_index In function ext4_ext_insert_index when eh_entries of curp is bigger than eh_max, error messages will be printed out, but the content is about logical and ei_block, that's incorret. Signed-off-by: Robin Dong Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index f815cc8..eb63c7b 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -808,8 +808,9 @@ static int ext4_ext_insert_index(handle_t *handle, struct inode *inode, if (unlikely(le16_to_cpu(curp->p_hdr->eh_entries) > le16_to_cpu(curp->p_hdr->eh_max))) { EXT4_ERROR_INODE(inode, - "logical %d == ei_block %d!", - logical, le32_to_cpu(curp->p_idx->ei_block)); + "eh_entries %d > eh_max %d!", + le16_to_cpu(curp->p_hdr->eh_entries), + le16_to_cpu(curp->p_hdr->eh_max)); return -EIO; } if (unlikely(ix > EXT_LAST_INDEX(curp->p_hdr))) { -- cgit v0.10.2 From ff9893dc8aa622a4f122293a6861566a284edea5 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Mon, 27 Jun 2011 16:36:31 -0400 Subject: ext4: split ext4_ind_truncate from ext4_truncate We are about to move all indirect inode functions to a new file. Before we do that, let's split ext4_ind_truncate() out of ext4_truncate() leaving only generic code in the latter, so we will be able to move ext4_ind_truncate() to the new file. Signed-off-by: Amir Goldstein Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 1921392..8532dd4 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1834,6 +1834,8 @@ extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); extern qsize_t *ext4_get_reserved_space(struct inode *inode); extern void ext4_da_update_reserve_space(struct inode *inode, int used, int quota_claim); +extern void ext4_ind_truncate(struct inode *inode); + /* ioctl.c */ extern long ext4_ioctl(struct file *, unsigned int, unsigned long); extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index e3126c0..a8f310b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4471,6 +4471,26 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length) */ void ext4_truncate(struct inode *inode) { + trace_ext4_truncate_enter(inode); + + if (!ext4_can_truncate(inode)) + return; + + ext4_clear_inode_flag(inode, EXT4_INODE_EOFBLOCKS); + + if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC)) + ext4_set_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE); + + if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) + ext4_ext_truncate(inode); + else + ext4_ind_truncate(inode); + + trace_ext4_truncate_exit(inode); +} + +void ext4_ind_truncate(struct inode *inode) +{ handle_t *handle; struct ext4_inode_info *ei = EXT4_I(inode); __le32 *i_data = ei->i_data; @@ -4484,22 +4504,6 @@ void ext4_truncate(struct inode *inode) ext4_lblk_t last_block, max_block; unsigned blocksize = inode->i_sb->s_blocksize; - trace_ext4_truncate_enter(inode); - - if (!ext4_can_truncate(inode)) - return; - - ext4_clear_inode_flag(inode, EXT4_INODE_EOFBLOCKS); - - if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC)) - ext4_set_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE); - - if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) { - ext4_ext_truncate(inode); - trace_ext4_truncate_exit(inode); - return; - } - handle = start_transaction(inode); if (IS_ERR(handle)) return; /* AKPM: return what? */ -- cgit v0.10.2 From 8bb2b247124ba6093455d4aef26743b1bef27bc5 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Mon, 27 Jun 2011 17:10:28 -0400 Subject: ext4: rename ext4_indirect_* funcs to ext4_ind_* We are going to move all ext4_ind_* functions to indirect.c. Before we do that, let's rename 2 functions called ext4_indirect_* to ext4_ind_*, to keep to the naming convention. Signed-off-by: Amir Goldstein Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a8f310b..6c1d28e 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1075,8 +1075,7 @@ qsize_t *ext4_get_reserved_space(struct inode *inode) * Calculate the number of metadata blocks need to reserve * to allocate a new block at @lblocks for non extent file based file */ -static int ext4_indirect_calc_metadata_amount(struct inode *inode, - sector_t lblock) +static int ext4_ind_calc_metadata_amount(struct inode *inode, sector_t lblock) { struct ext4_inode_info *ei = EXT4_I(inode); sector_t dind_mask = ~((sector_t)EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1); @@ -1107,7 +1106,7 @@ static int ext4_calc_metadata_amount(struct inode *inode, ext4_lblk_t lblock) if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) return ext4_ext_calc_metadata_amount(inode, lblock); - return ext4_indirect_calc_metadata_amount(inode, lblock); + return ext4_ind_calc_metadata_amount(inode, lblock); } /* @@ -5456,8 +5455,7 @@ int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry, return 0; } -static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks, - int chunk) +static int ext4_ind_trans_blocks(struct inode *inode, int nrblocks, int chunk) { int indirects; @@ -5483,7 +5481,7 @@ static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks, static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk) { if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) - return ext4_indirect_trans_blocks(inode, nrblocks, chunk); + return ext4_ind_trans_blocks(inode, nrblocks, chunk); return ext4_ext_index_trans_blocks(inode, nrblocks, chunk); } -- cgit v0.10.2 From 1f7d1e77419050831a905353683807fa69a26625 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 27 Jun 2011 19:16:02 -0400 Subject: ext4: move __ext4_check_blockref to block_validity.c In preparation for moving the indirect functions to a separate file, move __ext4_check_blockref() to block_validity.c and rename it to ext4_check_blockref() which is exported as globally visible function. Also, rename the cpp macro ext4_check_inode_blockref() to ext4_ind_check_inode(), to make it clear that it is only valid for use with non-extent mapped inodes. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c index fac90f3..af103be 100644 --- a/fs/ext4/block_validity.c +++ b/fs/ext4/block_validity.c @@ -246,3 +246,23 @@ int ext4_data_block_valid(struct ext4_sb_info *sbi, ext4_fsblk_t start_blk, return 1; } +int ext4_check_blockref(const char *function, unsigned int line, + struct inode *inode, __le32 *p, unsigned int max) +{ + struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es; + __le32 *bref = p; + unsigned int blk; + + while (bref < p+max) { + blk = le32_to_cpu(*bref++); + if (blk && + unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb), + blk, 1))) { + es->s_last_error_block = cpu_to_le64(blk); + ext4_error_inode(inode, function, line, blk, + "invalid block"); + return -EIO; + } + } + return 0; +} diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 8532dd4..82ba7eb 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2125,6 +2125,19 @@ static inline void ext4_mark_super_dirty(struct super_block *sb) } /* + * Block validity checking + */ +#define ext4_check_indirect_blockref(inode, bh) \ + ext4_check_blockref(__func__, __LINE__, inode, \ + (__le32 *)(bh)->b_data, \ + EXT4_ADDR_PER_BLOCK((inode)->i_sb)) + +#define ext4_ind_check_inode(inode) \ + ext4_check_blockref(__func__, __LINE__, inode, \ + EXT4_I(inode)->i_data, \ + EXT4_NDIR_BLOCKS) + +/* * Inodes and files operations */ @@ -2153,6 +2166,8 @@ extern void ext4_exit_system_zone(void); extern int ext4_data_block_valid(struct ext4_sb_info *sbi, ext4_fsblk_t start_blk, unsigned int count); +extern int ext4_check_blockref(const char *, unsigned int, + struct inode *, __le32 *, unsigned int); /* extents.c */ extern int ext4_ext_tree_init(handle_t *handle, struct inode *); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 6c1d28e..3dca526 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -360,39 +360,6 @@ static int ext4_block_to_path(struct inode *inode, return n; } -static int __ext4_check_blockref(const char *function, unsigned int line, - struct inode *inode, - __le32 *p, unsigned int max) -{ - struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es; - __le32 *bref = p; - unsigned int blk; - - while (bref < p+max) { - blk = le32_to_cpu(*bref++); - if (blk && - unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb), - blk, 1))) { - es->s_last_error_block = cpu_to_le64(blk); - ext4_error_inode(inode, function, line, blk, - "invalid block"); - return -EIO; - } - } - return 0; -} - - -#define ext4_check_indirect_blockref(inode, bh) \ - __ext4_check_blockref(__func__, __LINE__, inode, \ - (__le32 *)(bh)->b_data, \ - EXT4_ADDR_PER_BLOCK((inode)->i_sb)) - -#define ext4_check_inode_blockref(inode) \ - __ext4_check_blockref(__func__, __LINE__, inode, \ - EXT4_I(inode)->i_data, \ - EXT4_NDIR_BLOCKS) - /** * ext4_get_branch - read the chain of indirect blocks leading to data * @inode: inode in question @@ -5010,7 +4977,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) (S_ISLNK(inode->i_mode) && !ext4_inode_is_fast_symlink(inode))) { /* Validate block references which are part of inode */ - ret = ext4_check_inode_blockref(inode); + ret = ext4_ind_check_inode(inode); } if (ret) goto bad_inode; -- cgit v0.10.2 From 9f125d641beb898f5bf2fe69583192c18043517a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 27 Jun 2011 19:16:04 -0400 Subject: ext4: move common truncate functions to header file Move two functions that will be needed by the indirect functions to be moved to indirect.c as well as inode.c to truncate.h as inline functions, so that we can avoid having duplicate copies of the function (which can be a maintenance problem) without having to expose them as globally functions. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 3dca526..9b82ac7 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -47,6 +47,7 @@ #include "xattr.h" #include "acl.h" #include "ext4_extents.h" +#include "truncate.h" #include @@ -89,33 +90,6 @@ static int ext4_inode_is_fast_symlink(struct inode *inode) } /* - * Work out how many blocks we need to proceed with the next chunk of a - * truncate transaction. - */ -static unsigned long blocks_for_truncate(struct inode *inode) -{ - ext4_lblk_t needed; - - needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); - - /* Give ourselves just enough room to cope with inodes in which - * i_blocks is corrupt: we've seen disk corruptions in the past - * which resulted in random data in an inode which looked enough - * like a regular file for ext4 to try to delete it. Things - * will go a bit crazy if that happens, but at least we should - * try not to panic the whole kernel. */ - if (needed < 2) - needed = 2; - - /* But we need to bound the transaction so we don't overflow the - * journal. */ - if (needed > EXT4_MAX_TRANS_DATA) - needed = EXT4_MAX_TRANS_DATA; - - return EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + needed; -} - -/* * Truncate transactions can be complex and absolutely huge. So we need to * be able to restart the transaction at a conventient checkpoint to make * sure we don't overflow the journal. @@ -129,7 +103,7 @@ static handle_t *start_transaction(struct inode *inode) { handle_t *result; - result = ext4_journal_start(inode, blocks_for_truncate(inode)); + result = ext4_journal_start(inode, ext4_blocks_for_truncate(inode)); if (!IS_ERR(result)) return result; @@ -149,7 +123,7 @@ static int try_to_extend_transaction(handle_t *handle, struct inode *inode) return 0; if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1)) return 0; - if (!ext4_journal_extend(handle, blocks_for_truncate(inode))) + if (!ext4_journal_extend(handle, ext4_blocks_for_truncate(inode))) return 0; return 1; } @@ -204,7 +178,7 @@ void ext4_evict_inode(struct inode *inode) if (is_bad_inode(inode)) goto no_delete; - handle = ext4_journal_start(inode, blocks_for_truncate(inode)+3); + handle = ext4_journal_start(inode, ext4_blocks_for_truncate(inode)+3); if (IS_ERR(handle)) { ext4_std_error(inode->i_sb, PTR_ERR(handle)); /* @@ -1555,16 +1529,6 @@ static int do_journal_get_write_access(handle_t *handle, return ret; } -/* - * Truncate blocks that were not used by write. We have to truncate the - * pagecache as well so that corresponding buffers get properly unmapped. - */ -static void ext4_truncate_failed_write(struct inode *inode) -{ - truncate_inode_pages(inode->i_mapping, inode->i_size); - ext4_truncate(inode); -} - static int ext4_get_block_write(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create); static int ext4_write_begin(struct file *file, struct address_space *mapping, @@ -4134,7 +4098,7 @@ static int ext4_clear_blocks(handle_t *handle, struct inode *inode, if (unlikely(err)) goto out_err; err = ext4_truncate_restart_trans(handle, inode, - blocks_for_truncate(inode)); + ext4_blocks_for_truncate(inode)); if (unlikely(err)) goto out_err; if (bh) { @@ -4329,7 +4293,7 @@ static void ext4_free_branches(handle_t *handle, struct inode *inode, if (try_to_extend_transaction(handle, inode)) { ext4_mark_inode_dirty(handle, inode); ext4_truncate_restart_trans(handle, inode, - blocks_for_truncate(inode)); + ext4_blocks_for_truncate(inode)); } /* diff --git a/fs/ext4/truncate.h b/fs/ext4/truncate.h new file mode 100644 index 0000000..011ba66 --- /dev/null +++ b/fs/ext4/truncate.h @@ -0,0 +1,43 @@ +/* + * linux/fs/ext4/truncate.h + * + * Common inline functions needed for truncate support + */ + +/* + * Truncate blocks that were not used by write. We have to truncate the + * pagecache as well so that corresponding buffers get properly unmapped. + */ +static inline void ext4_truncate_failed_write(struct inode *inode) +{ + truncate_inode_pages(inode->i_mapping, inode->i_size); + ext4_truncate(inode); +} + +/* + * Work out how many blocks we need to proceed with the next chunk of a + * truncate transaction. + */ +static inline unsigned long ext4_blocks_for_truncate(struct inode *inode) +{ + ext4_lblk_t needed; + + needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); + + /* Give ourselves just enough room to cope with inodes in which + * i_blocks is corrupt: we've seen disk corruptions in the past + * which resulted in random data in an inode which looked enough + * like a regular file for ext4 to try to delete it. Things + * will go a bit crazy if that happens, but at least we should + * try not to panic the whole kernel. */ + if (needed < 2) + needed = 2; + + /* But we need to bound the transaction so we don't overflow the + * journal. */ + if (needed > EXT4_MAX_TRANS_DATA) + needed = EXT4_MAX_TRANS_DATA; + + return EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + needed; +} + -- cgit v0.10.2 From dae1e52cb1267bf8f52e5e47a80fab566d7e8aa4 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Mon, 27 Jun 2011 19:40:50 -0400 Subject: ext4: move ext4_ind_* functions from inode.c to indirect.c This patch moves functions from inode.c to indirect.c. The moved functions are ext4_ind_* functions and their helpers. Functions called from inode.c are declared extern. Signed-off-by: Amir Goldstein Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile index 04109460..56fd8f86 100644 --- a/fs/ext4/Makefile +++ b/fs/ext4/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_EXT4_FS) += ext4.o ext4-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o page-io.o \ ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \ ext4_jbd2.o migrate.o mballoc.o block_validity.o move_extent.o \ - mmp.o + mmp.o indirect.o ext4-$(CONFIG_EXT4_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c index af103be..8efb2f0 100644 --- a/fs/ext4/block_validity.c +++ b/fs/ext4/block_validity.c @@ -266,3 +266,4 @@ int ext4_check_blockref(const char *function, unsigned int line, } return 0; } + diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 82ba7eb..ddaf504 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1834,6 +1834,15 @@ extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); extern qsize_t *ext4_get_reserved_space(struct inode *inode); extern void ext4_da_update_reserve_space(struct inode *inode, int used, int quota_claim); + +/* indirect.c */ +extern int ext4_ind_map_blocks(handle_t *handle, struct inode *inode, + struct ext4_map_blocks *map, int flags); +extern ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb, + const struct iovec *iov, loff_t offset, + unsigned long nr_segs); +extern int ext4_ind_calc_metadata_amount(struct inode *inode, sector_t lblock); +extern int ext4_ind_trans_blocks(struct inode *inode, int nrblocks, int chunk); extern void ext4_ind_truncate(struct inode *inode); /* ioctl.c */ diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c new file mode 100644 index 0000000..c3e85a8 --- /dev/null +++ b/fs/ext4/indirect.c @@ -0,0 +1,1510 @@ +/* + * linux/fs/ext4/indirect.c + * + * from + * + * linux/fs/ext4/inode.c + * + * Copyright (C) 1992, 1993, 1994, 1995 + * Remy Card (card@masi.ibp.fr) + * Laboratoire MASI - Institut Blaise Pascal + * Universite Pierre et Marie Curie (Paris VI) + * + * from + * + * linux/fs/minix/inode.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Goal-directed block allocation by Stephen Tweedie + * (sct@redhat.com), 1993, 1998 + */ + +#include +#include "ext4_jbd2.h" +#include "truncate.h" + +#include + +typedef struct { + __le32 *p; + __le32 key; + struct buffer_head *bh; +} Indirect; + +static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) +{ + p->key = *(p->p = v); + p->bh = bh; +} + +/** + * ext4_block_to_path - parse the block number into array of offsets + * @inode: inode in question (we are only interested in its superblock) + * @i_block: block number to be parsed + * @offsets: array to store the offsets in + * @boundary: set this non-zero if the referred-to block is likely to be + * followed (on disk) by an indirect block. + * + * To store the locations of file's data ext4 uses a data structure common + * for UNIX filesystems - tree of pointers anchored in the inode, with + * data blocks at leaves and indirect blocks in intermediate nodes. + * This function translates the block number into path in that tree - + * return value is the path length and @offsets[n] is the offset of + * pointer to (n+1)th node in the nth one. If @block is out of range + * (negative or too large) warning is printed and zero returned. + * + * Note: function doesn't find node addresses, so no IO is needed. All + * we need to know is the capacity of indirect blocks (taken from the + * inode->i_sb). + */ + +/* + * Portability note: the last comparison (check that we fit into triple + * indirect block) is spelled differently, because otherwise on an + * architecture with 32-bit longs and 8Kb pages we might get into trouble + * if our filesystem had 8Kb blocks. We might use long long, but that would + * kill us on x86. Oh, well, at least the sign propagation does not matter - + * i_block would have to be negative in the very beginning, so we would not + * get there at all. + */ + +static int ext4_block_to_path(struct inode *inode, + ext4_lblk_t i_block, + ext4_lblk_t offsets[4], int *boundary) +{ + int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); + int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); + const long direct_blocks = EXT4_NDIR_BLOCKS, + indirect_blocks = ptrs, + double_blocks = (1 << (ptrs_bits * 2)); + int n = 0; + int final = 0; + + if (i_block < direct_blocks) { + offsets[n++] = i_block; + final = direct_blocks; + } else if ((i_block -= direct_blocks) < indirect_blocks) { + offsets[n++] = EXT4_IND_BLOCK; + offsets[n++] = i_block; + final = ptrs; + } else if ((i_block -= indirect_blocks) < double_blocks) { + offsets[n++] = EXT4_DIND_BLOCK; + offsets[n++] = i_block >> ptrs_bits; + offsets[n++] = i_block & (ptrs - 1); + final = ptrs; + } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { + offsets[n++] = EXT4_TIND_BLOCK; + offsets[n++] = i_block >> (ptrs_bits * 2); + offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); + offsets[n++] = i_block & (ptrs - 1); + final = ptrs; + } else { + ext4_warning(inode->i_sb, "block %lu > max in inode %lu", + i_block + direct_blocks + + indirect_blocks + double_blocks, inode->i_ino); + } + if (boundary) + *boundary = final - 1 - (i_block & (ptrs - 1)); + return n; +} + +/** + * ext4_get_branch - read the chain of indirect blocks leading to data + * @inode: inode in question + * @depth: depth of the chain (1 - direct pointer, etc.) + * @offsets: offsets of pointers in inode/indirect blocks + * @chain: place to store the result + * @err: here we store the error value + * + * Function fills the array of triples and returns %NULL + * if everything went OK or the pointer to the last filled triple + * (incomplete one) otherwise. Upon the return chain[i].key contains + * the number of (i+1)-th block in the chain (as it is stored in memory, + * i.e. little-endian 32-bit), chain[i].p contains the address of that + * number (it points into struct inode for i==0 and into the bh->b_data + * for i>0) and chain[i].bh points to the buffer_head of i-th indirect + * block for i>0 and NULL for i==0. In other words, it holds the block + * numbers of the chain, addresses they were taken from (and where we can + * verify that chain did not change) and buffer_heads hosting these + * numbers. + * + * Function stops when it stumbles upon zero pointer (absent block) + * (pointer to last triple returned, *@err == 0) + * or when it gets an IO error reading an indirect block + * (ditto, *@err == -EIO) + * or when it reads all @depth-1 indirect blocks successfully and finds + * the whole chain, all way to the data (returns %NULL, *err == 0). + * + * Need to be called with + * down_read(&EXT4_I(inode)->i_data_sem) + */ +static Indirect *ext4_get_branch(struct inode *inode, int depth, + ext4_lblk_t *offsets, + Indirect chain[4], int *err) +{ + struct super_block *sb = inode->i_sb; + Indirect *p = chain; + struct buffer_head *bh; + + *err = 0; + /* i_data is not going away, no lock needed */ + add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); + if (!p->key) + goto no_block; + while (--depth) { + bh = sb_getblk(sb, le32_to_cpu(p->key)); + if (unlikely(!bh)) + goto failure; + + if (!bh_uptodate_or_lock(bh)) { + if (bh_submit_read(bh) < 0) { + put_bh(bh); + goto failure; + } + /* validate block references */ + if (ext4_check_indirect_blockref(inode, bh)) { + put_bh(bh); + goto failure; + } + } + + add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); + /* Reader: end */ + if (!p->key) + goto no_block; + } + return NULL; + +failure: + *err = -EIO; +no_block: + return p; +} + +/** + * ext4_find_near - find a place for allocation with sufficient locality + * @inode: owner + * @ind: descriptor of indirect block. + * + * This function returns the preferred place for block allocation. + * It is used when heuristic for sequential allocation fails. + * Rules are: + * + if there is a block to the left of our position - allocate near it. + * + if pointer will live in indirect block - allocate near that block. + * + if pointer will live in inode - allocate in the same + * cylinder group. + * + * In the latter case we colour the starting block by the callers PID to + * prevent it from clashing with concurrent allocations for a different inode + * in the same block group. The PID is used here so that functionally related + * files will be close-by on-disk. + * + * Caller must make sure that @ind is valid and will stay that way. + */ +static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) +{ + struct ext4_inode_info *ei = EXT4_I(inode); + __le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; + __le32 *p; + ext4_fsblk_t bg_start; + ext4_fsblk_t last_block; + ext4_grpblk_t colour; + ext4_group_t block_group; + int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); + + /* Try to find previous block */ + for (p = ind->p - 1; p >= start; p--) { + if (*p) + return le32_to_cpu(*p); + } + + /* No such thing, so let's try location of indirect block */ + if (ind->bh) + return ind->bh->b_blocknr; + + /* + * It is going to be referred to from the inode itself? OK, just put it + * into the same cylinder group then. + */ + block_group = ei->i_block_group; + if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { + block_group &= ~(flex_size-1); + if (S_ISREG(inode->i_mode)) + block_group++; + } + bg_start = ext4_group_first_block_no(inode->i_sb, block_group); + last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; + + /* + * If we are doing delayed allocation, we don't need take + * colour into account. + */ + if (test_opt(inode->i_sb, DELALLOC)) + return bg_start; + + if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) + colour = (current->pid % 16) * + (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); + else + colour = (current->pid % 16) * ((last_block - bg_start) / 16); + return bg_start + colour; +} + +/** + * ext4_find_goal - find a preferred place for allocation. + * @inode: owner + * @block: block we want + * @partial: pointer to the last triple within a chain + * + * Normally this function find the preferred place for block allocation, + * returns it. + * Because this is only used for non-extent files, we limit the block nr + * to 32 bits. + */ +static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, + Indirect *partial) +{ + ext4_fsblk_t goal; + + /* + * XXX need to get goal block from mballoc's data structures + */ + + goal = ext4_find_near(inode, partial); + goal = goal & EXT4_MAX_BLOCK_FILE_PHYS; + return goal; +} + +/** + * ext4_blks_to_allocate - Look up the block map and count the number + * of direct blocks need to be allocated for the given branch. + * + * @branch: chain of indirect blocks + * @k: number of blocks need for indirect blocks + * @blks: number of data blocks to be mapped. + * @blocks_to_boundary: the offset in the indirect block + * + * return the total number of blocks to be allocate, including the + * direct and indirect blocks. + */ +static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, + int blocks_to_boundary) +{ + unsigned int count = 0; + + /* + * Simple case, [t,d]Indirect block(s) has not allocated yet + * then it's clear blocks on that path have not allocated + */ + if (k > 0) { + /* right now we don't handle cross boundary allocation */ + if (blks < blocks_to_boundary + 1) + count += blks; + else + count += blocks_to_boundary + 1; + return count; + } + + count++; + while (count < blks && count <= blocks_to_boundary && + le32_to_cpu(*(branch[0].p + count)) == 0) { + count++; + } + return count; +} + +/** + * ext4_alloc_blocks: multiple allocate blocks needed for a branch + * @handle: handle for this transaction + * @inode: inode which needs allocated blocks + * @iblock: the logical block to start allocated at + * @goal: preferred physical block of allocation + * @indirect_blks: the number of blocks need to allocate for indirect + * blocks + * @blks: number of desired blocks + * @new_blocks: on return it will store the new block numbers for + * the indirect blocks(if needed) and the first direct block, + * @err: on return it will store the error code + * + * This function will return the number of blocks allocated as + * requested by the passed-in parameters. + */ +static int ext4_alloc_blocks(handle_t *handle, struct inode *inode, + ext4_lblk_t iblock, ext4_fsblk_t goal, + int indirect_blks, int blks, + ext4_fsblk_t new_blocks[4], int *err) +{ + struct ext4_allocation_request ar; + int target, i; + unsigned long count = 0, blk_allocated = 0; + int index = 0; + ext4_fsblk_t current_block = 0; + int ret = 0; + + /* + * Here we try to allocate the requested multiple blocks at once, + * on a best-effort basis. + * To build a branch, we should allocate blocks for + * the indirect blocks(if not allocated yet), and at least + * the first direct block of this branch. That's the + * minimum number of blocks need to allocate(required) + */ + /* first we try to allocate the indirect blocks */ + target = indirect_blks; + while (target > 0) { + count = target; + /* allocating blocks for indirect blocks and direct blocks */ + current_block = ext4_new_meta_blocks(handle, inode, goal, + 0, &count, err); + if (*err) + goto failed_out; + + if (unlikely(current_block + count > EXT4_MAX_BLOCK_FILE_PHYS)) { + EXT4_ERROR_INODE(inode, + "current_block %llu + count %lu > %d!", + current_block, count, + EXT4_MAX_BLOCK_FILE_PHYS); + *err = -EIO; + goto failed_out; + } + + target -= count; + /* allocate blocks for indirect blocks */ + while (index < indirect_blks && count) { + new_blocks[index++] = current_block++; + count--; + } + if (count > 0) { + /* + * save the new block number + * for the first direct block + */ + new_blocks[index] = current_block; + printk(KERN_INFO "%s returned more blocks than " + "requested\n", __func__); + WARN_ON(1); + break; + } + } + + target = blks - count ; + blk_allocated = count; + if (!target) + goto allocated; + /* Now allocate data blocks */ + memset(&ar, 0, sizeof(ar)); + ar.inode = inode; + ar.goal = goal; + ar.len = target; + ar.logical = iblock; + if (S_ISREG(inode->i_mode)) + /* enable in-core preallocation only for regular files */ + ar.flags = EXT4_MB_HINT_DATA; + + current_block = ext4_mb_new_blocks(handle, &ar, err); + if (unlikely(current_block + ar.len > EXT4_MAX_BLOCK_FILE_PHYS)) { + EXT4_ERROR_INODE(inode, + "current_block %llu + ar.len %d > %d!", + current_block, ar.len, + EXT4_MAX_BLOCK_FILE_PHYS); + *err = -EIO; + goto failed_out; + } + + if (*err && (target == blks)) { + /* + * if the allocation failed and we didn't allocate + * any blocks before + */ + goto failed_out; + } + if (!*err) { + if (target == blks) { + /* + * save the new block number + * for the first direct block + */ + new_blocks[index] = current_block; + } + blk_allocated += ar.len; + } +allocated: + /* total number of blocks allocated for direct blocks */ + ret = blk_allocated; + *err = 0; + return ret; +failed_out: + for (i = 0; i < index; i++) + ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, 0); + return ret; +} + +/** + * ext4_alloc_branch - allocate and set up a chain of blocks. + * @handle: handle for this transaction + * @inode: owner + * @indirect_blks: number of allocated indirect blocks + * @blks: number of allocated direct blocks + * @goal: preferred place for allocation + * @offsets: offsets (in the blocks) to store the pointers to next. + * @branch: place to store the chain in. + * + * This function allocates blocks, zeroes out all but the last one, + * links them into chain and (if we are synchronous) writes them to disk. + * In other words, it prepares a branch that can be spliced onto the + * inode. It stores the information about that chain in the branch[], in + * the same format as ext4_get_branch() would do. We are calling it after + * we had read the existing part of chain and partial points to the last + * triple of that (one with zero ->key). Upon the exit we have the same + * picture as after the successful ext4_get_block(), except that in one + * place chain is disconnected - *branch->p is still zero (we did not + * set the last link), but branch->key contains the number that should + * be placed into *branch->p to fill that gap. + * + * If allocation fails we free all blocks we've allocated (and forget + * their buffer_heads) and return the error value the from failed + * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain + * as described above and return 0. + */ +static int ext4_alloc_branch(handle_t *handle, struct inode *inode, + ext4_lblk_t iblock, int indirect_blks, + int *blks, ext4_fsblk_t goal, + ext4_lblk_t *offsets, Indirect *branch) +{ + int blocksize = inode->i_sb->s_blocksize; + int i, n = 0; + int err = 0; + struct buffer_head *bh; + int num; + ext4_fsblk_t new_blocks[4]; + ext4_fsblk_t current_block; + + num = ext4_alloc_blocks(handle, inode, iblock, goal, indirect_blks, + *blks, new_blocks, &err); + if (err) + return err; + + branch[0].key = cpu_to_le32(new_blocks[0]); + /* + * metadata blocks and data blocks are allocated. + */ + for (n = 1; n <= indirect_blks; n++) { + /* + * Get buffer_head for parent block, zero it out + * and set the pointer to new one, then send + * parent to disk. + */ + bh = sb_getblk(inode->i_sb, new_blocks[n-1]); + if (unlikely(!bh)) { + err = -EIO; + goto failed; + } + + branch[n].bh = bh; + lock_buffer(bh); + BUFFER_TRACE(bh, "call get_create_access"); + err = ext4_journal_get_create_access(handle, bh); + if (err) { + /* Don't brelse(bh) here; it's done in + * ext4_journal_forget() below */ + unlock_buffer(bh); + goto failed; + } + + memset(bh->b_data, 0, blocksize); + branch[n].p = (__le32 *) bh->b_data + offsets[n]; + branch[n].key = cpu_to_le32(new_blocks[n]); + *branch[n].p = branch[n].key; + if (n == indirect_blks) { + current_block = new_blocks[n]; + /* + * End of chain, update the last new metablock of + * the chain to point to the new allocated + * data blocks numbers + */ + for (i = 1; i < num; i++) + *(branch[n].p + i) = cpu_to_le32(++current_block); + } + BUFFER_TRACE(bh, "marking uptodate"); + set_buffer_uptodate(bh); + unlock_buffer(bh); + + BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); + err = ext4_handle_dirty_metadata(handle, inode, bh); + if (err) + goto failed; + } + *blks = num; + return err; +failed: + /* Allocation failed, free what we already allocated */ + ext4_free_blocks(handle, inode, NULL, new_blocks[0], 1, 0); + for (i = 1; i <= n ; i++) { + /* + * branch[i].bh is newly allocated, so there is no + * need to revoke the block, which is why we don't + * need to set EXT4_FREE_BLOCKS_METADATA. + */ + ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, + EXT4_FREE_BLOCKS_FORGET); + } + for (i = n+1; i < indirect_blks; i++) + ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, 0); + + ext4_free_blocks(handle, inode, NULL, new_blocks[i], num, 0); + + return err; +} + +/** + * ext4_splice_branch - splice the allocated branch onto inode. + * @handle: handle for this transaction + * @inode: owner + * @block: (logical) number of block we are adding + * @chain: chain of indirect blocks (with a missing link - see + * ext4_alloc_branch) + * @where: location of missing link + * @num: number of indirect blocks we are adding + * @blks: number of direct blocks we are adding + * + * This function fills the missing link and does all housekeeping needed in + * inode (->i_blocks, etc.). In case of success we end up with the full + * chain to new block and return 0. + */ +static int ext4_splice_branch(handle_t *handle, struct inode *inode, + ext4_lblk_t block, Indirect *where, int num, + int blks) +{ + int i; + int err = 0; + ext4_fsblk_t current_block; + + /* + * If we're splicing into a [td]indirect block (as opposed to the + * inode) then we need to get write access to the [td]indirect block + * before the splice. + */ + if (where->bh) { + BUFFER_TRACE(where->bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, where->bh); + if (err) + goto err_out; + } + /* That's it */ + + *where->p = where->key; + + /* + * Update the host buffer_head or inode to point to more just allocated + * direct blocks blocks + */ + if (num == 0 && blks > 1) { + current_block = le32_to_cpu(where->key) + 1; + for (i = 1; i < blks; i++) + *(where->p + i) = cpu_to_le32(current_block++); + } + + /* We are done with atomic stuff, now do the rest of housekeeping */ + /* had we spliced it onto indirect block? */ + if (where->bh) { + /* + * If we spliced it onto an indirect block, we haven't + * altered the inode. Note however that if it is being spliced + * onto an indirect block at the very end of the file (the + * file is growing) then we *will* alter the inode to reflect + * the new i_size. But that is not done here - it is done in + * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. + */ + jbd_debug(5, "splicing indirect only\n"); + BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); + err = ext4_handle_dirty_metadata(handle, inode, where->bh); + if (err) + goto err_out; + } else { + /* + * OK, we spliced it into the inode itself on a direct block. + */ + ext4_mark_inode_dirty(handle, inode); + jbd_debug(5, "splicing direct\n"); + } + return err; + +err_out: + for (i = 1; i <= num; i++) { + /* + * branch[i].bh is newly allocated, so there is no + * need to revoke the block, which is why we don't + * need to set EXT4_FREE_BLOCKS_METADATA. + */ + ext4_free_blocks(handle, inode, where[i].bh, 0, 1, + EXT4_FREE_BLOCKS_FORGET); + } + ext4_free_blocks(handle, inode, NULL, le32_to_cpu(where[num].key), + blks, 0); + + return err; +} + +/* + * The ext4_ind_map_blocks() function handles non-extents inodes + * (i.e., using the traditional indirect/double-indirect i_blocks + * scheme) for ext4_map_blocks(). + * + * Allocation strategy is simple: if we have to allocate something, we will + * have to go the whole way to leaf. So let's do it before attaching anything + * to tree, set linkage between the newborn blocks, write them if sync is + * required, recheck the path, free and repeat if check fails, otherwise + * set the last missing link (that will protect us from any truncate-generated + * removals - all blocks on the path are immune now) and possibly force the + * write on the parent block. + * That has a nice additional property: no special recovery from the failed + * allocations is needed - we simply release blocks and do not touch anything + * reachable from inode. + * + * `handle' can be NULL if create == 0. + * + * return > 0, # of blocks mapped or allocated. + * return = 0, if plain lookup failed. + * return < 0, error case. + * + * The ext4_ind_get_blocks() function should be called with + * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem + * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or + * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system + * blocks. + */ +int ext4_ind_map_blocks(handle_t *handle, struct inode *inode, + struct ext4_map_blocks *map, + int flags) +{ + int err = -EIO; + ext4_lblk_t offsets[4]; + Indirect chain[4]; + Indirect *partial; + ext4_fsblk_t goal; + int indirect_blks; + int blocks_to_boundary = 0; + int depth; + int count = 0; + ext4_fsblk_t first_block = 0; + + trace_ext4_ind_map_blocks_enter(inode, map->m_lblk, map->m_len, flags); + J_ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))); + J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); + depth = ext4_block_to_path(inode, map->m_lblk, offsets, + &blocks_to_boundary); + + if (depth == 0) + goto out; + + partial = ext4_get_branch(inode, depth, offsets, chain, &err); + + /* Simplest case - block found, no allocation needed */ + if (!partial) { + first_block = le32_to_cpu(chain[depth - 1].key); + count++; + /*map more blocks*/ + while (count < map->m_len && count <= blocks_to_boundary) { + ext4_fsblk_t blk; + + blk = le32_to_cpu(*(chain[depth-1].p + count)); + + if (blk == first_block + count) + count++; + else + break; + } + goto got_it; + } + + /* Next simple case - plain lookup or failed read of indirect block */ + if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO) + goto cleanup; + + /* + * Okay, we need to do block allocation. + */ + goal = ext4_find_goal(inode, map->m_lblk, partial); + + /* the number of blocks need to allocate for [d,t]indirect blocks */ + indirect_blks = (chain + depth) - partial - 1; + + /* + * Next look up the indirect map to count the totoal number of + * direct blocks to allocate for this branch. + */ + count = ext4_blks_to_allocate(partial, indirect_blks, + map->m_len, blocks_to_boundary); + /* + * Block out ext4_truncate while we alter the tree + */ + err = ext4_alloc_branch(handle, inode, map->m_lblk, indirect_blks, + &count, goal, + offsets + (partial - chain), partial); + + /* + * The ext4_splice_branch call will free and forget any buffers + * on the new chain if there is a failure, but that risks using + * up transaction credits, especially for bitmaps where the + * credits cannot be returned. Can we handle this somehow? We + * may need to return -EAGAIN upwards in the worst case. --sct + */ + if (!err) + err = ext4_splice_branch(handle, inode, map->m_lblk, + partial, indirect_blks, count); + if (err) + goto cleanup; + + map->m_flags |= EXT4_MAP_NEW; + + ext4_update_inode_fsync_trans(handle, inode, 1); +got_it: + map->m_flags |= EXT4_MAP_MAPPED; + map->m_pblk = le32_to_cpu(chain[depth-1].key); + map->m_len = count; + if (count > blocks_to_boundary) + map->m_flags |= EXT4_MAP_BOUNDARY; + err = count; + /* Clean up and exit */ + partial = chain + depth - 1; /* the whole chain */ +cleanup: + while (partial > chain) { + BUFFER_TRACE(partial->bh, "call brelse"); + brelse(partial->bh); + partial--; + } +out: + trace_ext4_ind_map_blocks_exit(inode, map->m_lblk, + map->m_pblk, map->m_len, err); + return err; +} + +/* + * O_DIRECT for ext3 (or indirect map) based files + * + * If the O_DIRECT write will extend the file then add this inode to the + * orphan list. So recovery will truncate it back to the original size + * if the machine crashes during the write. + * + * If the O_DIRECT write is intantiating holes inside i_size and the machine + * crashes then stale disk data _may_ be exposed inside the file. But current + * VFS code falls back into buffered path in that case so we are safe. + */ +ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb, + const struct iovec *iov, loff_t offset, + unsigned long nr_segs) +{ + struct file *file = iocb->ki_filp; + struct inode *inode = file->f_mapping->host; + struct ext4_inode_info *ei = EXT4_I(inode); + handle_t *handle; + ssize_t ret; + int orphan = 0; + size_t count = iov_length(iov, nr_segs); + int retries = 0; + + if (rw == WRITE) { + loff_t final_size = offset + count; + + if (final_size > inode->i_size) { + /* Credits for sb + inode write */ + handle = ext4_journal_start(inode, 2); + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); + goto out; + } + ret = ext4_orphan_add(handle, inode); + if (ret) { + ext4_journal_stop(handle); + goto out; + } + orphan = 1; + ei->i_disksize = inode->i_size; + ext4_journal_stop(handle); + } + } + +retry: + if (rw == READ && ext4_should_dioread_nolock(inode)) + ret = __blockdev_direct_IO(rw, iocb, inode, + inode->i_sb->s_bdev, iov, + offset, nr_segs, + ext4_get_block, NULL, NULL, 0); + else { + ret = blockdev_direct_IO(rw, iocb, inode, + inode->i_sb->s_bdev, iov, + offset, nr_segs, + ext4_get_block, NULL); + + if (unlikely((rw & WRITE) && ret < 0)) { + loff_t isize = i_size_read(inode); + loff_t end = offset + iov_length(iov, nr_segs); + + if (end > isize) + ext4_truncate_failed_write(inode); + } + } + if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) + goto retry; + + if (orphan) { + int err; + + /* Credits for sb + inode write */ + handle = ext4_journal_start(inode, 2); + if (IS_ERR(handle)) { + /* This is really bad luck. We've written the data + * but cannot extend i_size. Bail out and pretend + * the write failed... */ + ret = PTR_ERR(handle); + if (inode->i_nlink) + ext4_orphan_del(NULL, inode); + + goto out; + } + if (inode->i_nlink) + ext4_orphan_del(handle, inode); + if (ret > 0) { + loff_t end = offset + ret; + if (end > inode->i_size) { + ei->i_disksize = end; + i_size_write(inode, end); + /* + * We're going to return a positive `ret' + * here due to non-zero-length I/O, so there's + * no way of reporting error returns from + * ext4_mark_inode_dirty() to userspace. So + * ignore it. + */ + ext4_mark_inode_dirty(handle, inode); + } + } + err = ext4_journal_stop(handle); + if (ret == 0) + ret = err; + } +out: + return ret; +} + +/* + * Calculate the number of metadata blocks need to reserve + * to allocate a new block at @lblocks for non extent file based file + */ +int ext4_ind_calc_metadata_amount(struct inode *inode, sector_t lblock) +{ + struct ext4_inode_info *ei = EXT4_I(inode); + sector_t dind_mask = ~((sector_t)EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1); + int blk_bits; + + if (lblock < EXT4_NDIR_BLOCKS) + return 0; + + lblock -= EXT4_NDIR_BLOCKS; + + if (ei->i_da_metadata_calc_len && + (lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) { + ei->i_da_metadata_calc_len++; + return 0; + } + ei->i_da_metadata_calc_last_lblock = lblock & dind_mask; + ei->i_da_metadata_calc_len = 1; + blk_bits = order_base_2(lblock); + return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1; +} + +int ext4_ind_trans_blocks(struct inode *inode, int nrblocks, int chunk) +{ + int indirects; + + /* if nrblocks are contiguous */ + if (chunk) { + /* + * With N contiguous data blocks, we need at most + * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks, + * 2 dindirect blocks, and 1 tindirect block + */ + return DIV_ROUND_UP(nrblocks, + EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4; + } + /* + * if nrblocks are not contiguous, worse case, each block touch + * a indirect block, and each indirect block touch a double indirect + * block, plus a triple indirect block + */ + indirects = nrblocks * 2 + 1; + return indirects; +} + +/* + * Truncate transactions can be complex and absolutely huge. So we need to + * be able to restart the transaction at a conventient checkpoint to make + * sure we don't overflow the journal. + * + * start_transaction gets us a new handle for a truncate transaction, + * and extend_transaction tries to extend the existing one a bit. If + * extend fails, we need to propagate the failure up and restart the + * transaction in the top-level truncate loop. --sct + */ +static handle_t *start_transaction(struct inode *inode) +{ + handle_t *result; + + result = ext4_journal_start(inode, ext4_blocks_for_truncate(inode)); + if (!IS_ERR(result)) + return result; + + ext4_std_error(inode->i_sb, PTR_ERR(result)); + return result; +} + +/* + * Try to extend this transaction for the purposes of truncation. + * + * Returns 0 if we managed to create more room. If we can't create more + * room, and the transaction must be restarted we return 1. + */ +static int try_to_extend_transaction(handle_t *handle, struct inode *inode) +{ + if (!ext4_handle_valid(handle)) + return 0; + if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1)) + return 0; + if (!ext4_journal_extend(handle, ext4_blocks_for_truncate(inode))) + return 0; + return 1; +} + +/* + * Probably it should be a library function... search for first non-zero word + * or memcmp with zero_page, whatever is better for particular architecture. + * Linus? + */ +static inline int all_zeroes(__le32 *p, __le32 *q) +{ + while (p < q) + if (*p++) + return 0; + return 1; +} + +/** + * ext4_find_shared - find the indirect blocks for partial truncation. + * @inode: inode in question + * @depth: depth of the affected branch + * @offsets: offsets of pointers in that branch (see ext4_block_to_path) + * @chain: place to store the pointers to partial indirect blocks + * @top: place to the (detached) top of branch + * + * This is a helper function used by ext4_truncate(). + * + * When we do truncate() we may have to clean the ends of several + * indirect blocks but leave the blocks themselves alive. Block is + * partially truncated if some data below the new i_size is referred + * from it (and it is on the path to the first completely truncated + * data block, indeed). We have to free the top of that path along + * with everything to the right of the path. Since no allocation + * past the truncation point is possible until ext4_truncate() + * finishes, we may safely do the latter, but top of branch may + * require special attention - pageout below the truncation point + * might try to populate it. + * + * We atomically detach the top of branch from the tree, store the + * block number of its root in *@top, pointers to buffer_heads of + * partially truncated blocks - in @chain[].bh and pointers to + * their last elements that should not be removed - in + * @chain[].p. Return value is the pointer to last filled element + * of @chain. + * + * The work left to caller to do the actual freeing of subtrees: + * a) free the subtree starting from *@top + * b) free the subtrees whose roots are stored in + * (@chain[i].p+1 .. end of @chain[i].bh->b_data) + * c) free the subtrees growing from the inode past the @chain[0]. + * (no partially truncated stuff there). */ + +static Indirect *ext4_find_shared(struct inode *inode, int depth, + ext4_lblk_t offsets[4], Indirect chain[4], + __le32 *top) +{ + Indirect *partial, *p; + int k, err; + + *top = 0; + /* Make k index the deepest non-null offset + 1 */ + for (k = depth; k > 1 && !offsets[k-1]; k--) + ; + partial = ext4_get_branch(inode, k, offsets, chain, &err); + /* Writer: pointers */ + if (!partial) + partial = chain + k-1; + /* + * If the branch acquired continuation since we've looked at it - + * fine, it should all survive and (new) top doesn't belong to us. + */ + if (!partial->key && *partial->p) + /* Writer: end */ + goto no_top; + for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) + ; + /* + * OK, we've found the last block that must survive. The rest of our + * branch should be detached before unlocking. However, if that rest + * of branch is all ours and does not grow immediately from the inode + * it's easier to cheat and just decrement partial->p. + */ + if (p == chain + k - 1 && p > chain) { + p->p--; + } else { + *top = *p->p; + /* Nope, don't do this in ext4. Must leave the tree intact */ +#if 0 + *p->p = 0; +#endif + } + /* Writer: end */ + + while (partial > p) { + brelse(partial->bh); + partial--; + } +no_top: + return partial; +} + +/* + * Zero a number of block pointers in either an inode or an indirect block. + * If we restart the transaction we must again get write access to the + * indirect block for further modification. + * + * We release `count' blocks on disk, but (last - first) may be greater + * than `count' because there can be holes in there. + * + * Return 0 on success, 1 on invalid block range + * and < 0 on fatal error. + */ +static int ext4_clear_blocks(handle_t *handle, struct inode *inode, + struct buffer_head *bh, + ext4_fsblk_t block_to_free, + unsigned long count, __le32 *first, + __le32 *last) +{ + __le32 *p; + int flags = EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_VALIDATED; + int err; + + if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) + flags |= EXT4_FREE_BLOCKS_METADATA; + + if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free, + count)) { + EXT4_ERROR_INODE(inode, "attempt to clear invalid " + "blocks %llu len %lu", + (unsigned long long) block_to_free, count); + return 1; + } + + if (try_to_extend_transaction(handle, inode)) { + if (bh) { + BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); + err = ext4_handle_dirty_metadata(handle, inode, bh); + if (unlikely(err)) + goto out_err; + } + err = ext4_mark_inode_dirty(handle, inode); + if (unlikely(err)) + goto out_err; + err = ext4_truncate_restart_trans(handle, inode, + ext4_blocks_for_truncate(inode)); + if (unlikely(err)) + goto out_err; + if (bh) { + BUFFER_TRACE(bh, "retaking write access"); + err = ext4_journal_get_write_access(handle, bh); + if (unlikely(err)) + goto out_err; + } + } + + for (p = first; p < last; p++) + *p = 0; + + ext4_free_blocks(handle, inode, NULL, block_to_free, count, flags); + return 0; +out_err: + ext4_std_error(inode->i_sb, err); + return err; +} + +/** + * ext4_free_data - free a list of data blocks + * @handle: handle for this transaction + * @inode: inode we are dealing with + * @this_bh: indirect buffer_head which contains *@first and *@last + * @first: array of block numbers + * @last: points immediately past the end of array + * + * We are freeing all blocks referred from that array (numbers are stored as + * little-endian 32-bit) and updating @inode->i_blocks appropriately. + * + * We accumulate contiguous runs of blocks to free. Conveniently, if these + * blocks are contiguous then releasing them at one time will only affect one + * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't + * actually use a lot of journal space. + * + * @this_bh will be %NULL if @first and @last point into the inode's direct + * block pointers. + */ +static void ext4_free_data(handle_t *handle, struct inode *inode, + struct buffer_head *this_bh, + __le32 *first, __le32 *last) +{ + ext4_fsblk_t block_to_free = 0; /* Starting block # of a run */ + unsigned long count = 0; /* Number of blocks in the run */ + __le32 *block_to_free_p = NULL; /* Pointer into inode/ind + corresponding to + block_to_free */ + ext4_fsblk_t nr; /* Current block # */ + __le32 *p; /* Pointer into inode/ind + for current block */ + int err = 0; + + if (this_bh) { /* For indirect block */ + BUFFER_TRACE(this_bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, this_bh); + /* Important: if we can't update the indirect pointers + * to the blocks, we can't free them. */ + if (err) + return; + } + + for (p = first; p < last; p++) { + nr = le32_to_cpu(*p); + if (nr) { + /* accumulate blocks to free if they're contiguous */ + if (count == 0) { + block_to_free = nr; + block_to_free_p = p; + count = 1; + } else if (nr == block_to_free + count) { + count++; + } else { + err = ext4_clear_blocks(handle, inode, this_bh, + block_to_free, count, + block_to_free_p, p); + if (err) + break; + block_to_free = nr; + block_to_free_p = p; + count = 1; + } + } + } + + if (!err && count > 0) + err = ext4_clear_blocks(handle, inode, this_bh, block_to_free, + count, block_to_free_p, p); + if (err < 0) + /* fatal error */ + return; + + if (this_bh) { + BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); + + /* + * The buffer head should have an attached journal head at this + * point. However, if the data is corrupted and an indirect + * block pointed to itself, it would have been detached when + * the block was cleared. Check for this instead of OOPSing. + */ + if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) + ext4_handle_dirty_metadata(handle, inode, this_bh); + else + EXT4_ERROR_INODE(inode, + "circular indirect block detected at " + "block %llu", + (unsigned long long) this_bh->b_blocknr); + } +} + +/** + * ext4_free_branches - free an array of branches + * @handle: JBD handle for this transaction + * @inode: inode we are dealing with + * @parent_bh: the buffer_head which contains *@first and *@last + * @first: array of block numbers + * @last: pointer immediately past the end of array + * @depth: depth of the branches to free + * + * We are freeing all blocks referred from these branches (numbers are + * stored as little-endian 32-bit) and updating @inode->i_blocks + * appropriately. + */ +static void ext4_free_branches(handle_t *handle, struct inode *inode, + struct buffer_head *parent_bh, + __le32 *first, __le32 *last, int depth) +{ + ext4_fsblk_t nr; + __le32 *p; + + if (ext4_handle_is_aborted(handle)) + return; + + if (depth--) { + struct buffer_head *bh; + int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); + p = last; + while (--p >= first) { + nr = le32_to_cpu(*p); + if (!nr) + continue; /* A hole */ + + if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), + nr, 1)) { + EXT4_ERROR_INODE(inode, + "invalid indirect mapped " + "block %lu (level %d)", + (unsigned long) nr, depth); + break; + } + + /* Go read the buffer for the next level down */ + bh = sb_bread(inode->i_sb, nr); + + /* + * A read failure? Report error and clear slot + * (should be rare). + */ + if (!bh) { + EXT4_ERROR_INODE_BLOCK(inode, nr, + "Read failure"); + continue; + } + + /* This zaps the entire block. Bottom up. */ + BUFFER_TRACE(bh, "free child branches"); + ext4_free_branches(handle, inode, bh, + (__le32 *) bh->b_data, + (__le32 *) bh->b_data + addr_per_block, + depth); + brelse(bh); + + /* + * Everything below this this pointer has been + * released. Now let this top-of-subtree go. + * + * We want the freeing of this indirect block to be + * atomic in the journal with the updating of the + * bitmap block which owns it. So make some room in + * the journal. + * + * We zero the parent pointer *after* freeing its + * pointee in the bitmaps, so if extend_transaction() + * for some reason fails to put the bitmap changes and + * the release into the same transaction, recovery + * will merely complain about releasing a free block, + * rather than leaking blocks. + */ + if (ext4_handle_is_aborted(handle)) + return; + if (try_to_extend_transaction(handle, inode)) { + ext4_mark_inode_dirty(handle, inode); + ext4_truncate_restart_trans(handle, inode, + ext4_blocks_for_truncate(inode)); + } + + /* + * The forget flag here is critical because if + * we are journaling (and not doing data + * journaling), we have to make sure a revoke + * record is written to prevent the journal + * replay from overwriting the (former) + * indirect block if it gets reallocated as a + * data block. This must happen in the same + * transaction where the data blocks are + * actually freed. + */ + ext4_free_blocks(handle, inode, NULL, nr, 1, + EXT4_FREE_BLOCKS_METADATA| + EXT4_FREE_BLOCKS_FORGET); + + if (parent_bh) { + /* + * The block which we have just freed is + * pointed to by an indirect block: journal it + */ + BUFFER_TRACE(parent_bh, "get_write_access"); + if (!ext4_journal_get_write_access(handle, + parent_bh)){ + *p = 0; + BUFFER_TRACE(parent_bh, + "call ext4_handle_dirty_metadata"); + ext4_handle_dirty_metadata(handle, + inode, + parent_bh); + } + } + } + } else { + /* We have reached the bottom of the tree. */ + BUFFER_TRACE(parent_bh, "free data blocks"); + ext4_free_data(handle, inode, parent_bh, first, last); + } +} + +void ext4_ind_truncate(struct inode *inode) +{ + handle_t *handle; + struct ext4_inode_info *ei = EXT4_I(inode); + __le32 *i_data = ei->i_data; + int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); + struct address_space *mapping = inode->i_mapping; + ext4_lblk_t offsets[4]; + Indirect chain[4]; + Indirect *partial; + __le32 nr = 0; + int n = 0; + ext4_lblk_t last_block, max_block; + unsigned blocksize = inode->i_sb->s_blocksize; + + handle = start_transaction(inode); + if (IS_ERR(handle)) + return; /* AKPM: return what? */ + + last_block = (inode->i_size + blocksize-1) + >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); + max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1) + >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); + + if (inode->i_size & (blocksize - 1)) + if (ext4_block_truncate_page(handle, mapping, inode->i_size)) + goto out_stop; + + if (last_block != max_block) { + n = ext4_block_to_path(inode, last_block, offsets, NULL); + if (n == 0) + goto out_stop; /* error */ + } + + /* + * OK. This truncate is going to happen. We add the inode to the + * orphan list, so that if this truncate spans multiple transactions, + * and we crash, we will resume the truncate when the filesystem + * recovers. It also marks the inode dirty, to catch the new size. + * + * Implication: the file must always be in a sane, consistent + * truncatable state while each transaction commits. + */ + if (ext4_orphan_add(handle, inode)) + goto out_stop; + + /* + * From here we block out all ext4_get_block() callers who want to + * modify the block allocation tree. + */ + down_write(&ei->i_data_sem); + + ext4_discard_preallocations(inode); + + /* + * The orphan list entry will now protect us from any crash which + * occurs before the truncate completes, so it is now safe to propagate + * the new, shorter inode size (held for now in i_size) into the + * on-disk inode. We do this via i_disksize, which is the value which + * ext4 *really* writes onto the disk inode. + */ + ei->i_disksize = inode->i_size; + + if (last_block == max_block) { + /* + * It is unnecessary to free any data blocks if last_block is + * equal to the indirect block limit. + */ + goto out_unlock; + } else if (n == 1) { /* direct blocks */ + ext4_free_data(handle, inode, NULL, i_data+offsets[0], + i_data + EXT4_NDIR_BLOCKS); + goto do_indirects; + } + + partial = ext4_find_shared(inode, n, offsets, chain, &nr); + /* Kill the top of shared branch (not detached) */ + if (nr) { + if (partial == chain) { + /* Shared branch grows from the inode */ + ext4_free_branches(handle, inode, NULL, + &nr, &nr+1, (chain+n-1) - partial); + *partial->p = 0; + /* + * We mark the inode dirty prior to restart, + * and prior to stop. No need for it here. + */ + } else { + /* Shared branch grows from an indirect block */ + BUFFER_TRACE(partial->bh, "get_write_access"); + ext4_free_branches(handle, inode, partial->bh, + partial->p, + partial->p+1, (chain+n-1) - partial); + } + } + /* Clear the ends of indirect blocks on the shared branch */ + while (partial > chain) { + ext4_free_branches(handle, inode, partial->bh, partial->p + 1, + (__le32*)partial->bh->b_data+addr_per_block, + (chain+n-1) - partial); + BUFFER_TRACE(partial->bh, "call brelse"); + brelse(partial->bh); + partial--; + } +do_indirects: + /* Kill the remaining (whole) subtrees */ + switch (offsets[0]) { + default: + nr = i_data[EXT4_IND_BLOCK]; + if (nr) { + ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); + i_data[EXT4_IND_BLOCK] = 0; + } + case EXT4_IND_BLOCK: + nr = i_data[EXT4_DIND_BLOCK]; + if (nr) { + ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); + i_data[EXT4_DIND_BLOCK] = 0; + } + case EXT4_DIND_BLOCK: + nr = i_data[EXT4_TIND_BLOCK]; + if (nr) { + ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); + i_data[EXT4_TIND_BLOCK] = 0; + } + case EXT4_TIND_BLOCK: + ; + } + +out_unlock: + up_write(&ei->i_data_sem); + inode->i_mtime = inode->i_ctime = ext4_current_time(inode); + ext4_mark_inode_dirty(handle, inode); + + /* + * In a multi-transaction truncate, we only make the final transaction + * synchronous + */ + if (IS_SYNC(inode)) + ext4_handle_sync(handle); +out_stop: + /* + * If this was a simple ftruncate(), and the file will remain alive + * then we need to clear up the orphan record which we created above. + * However, if this was a real unlink then we were called by + * ext4_delete_inode(), and we allow that function to clean up the + * orphan info for us. + */ + if (inode->i_nlink) + ext4_orphan_del(handle, inode); + + ext4_journal_stop(handle); + trace_ext4_truncate_exit(inode); +} + diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9b82ac7..de50b16 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -12,10 +12,6 @@ * * Copyright (C) 1991, 1992 Linus Torvalds * - * Goal-directed block allocation by Stephen Tweedie - * (sct@redhat.com), 1993, 1998 - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 * 64-bit file support on 64-bit platforms by Jakub Jelinek * (jj@sunsite.ms.mff.cuni.cz) * @@ -90,45 +86,6 @@ static int ext4_inode_is_fast_symlink(struct inode *inode) } /* - * Truncate transactions can be complex and absolutely huge. So we need to - * be able to restart the transaction at a conventient checkpoint to make - * sure we don't overflow the journal. - * - * start_transaction gets us a new handle for a truncate transaction, - * and extend_transaction tries to extend the existing one a bit. If - * extend fails, we need to propagate the failure up and restart the - * transaction in the top-level truncate loop. --sct - */ -static handle_t *start_transaction(struct inode *inode) -{ - handle_t *result; - - result = ext4_journal_start(inode, ext4_blocks_for_truncate(inode)); - if (!IS_ERR(result)) - return result; - - ext4_std_error(inode->i_sb, PTR_ERR(result)); - return result; -} - -/* - * Try to extend this transaction for the purposes of truncation. - * - * Returns 0 if we managed to create more room. If we can't create more - * room, and the transaction must be restarted we return 1. - */ -static int try_to_extend_transaction(handle_t *handle, struct inode *inode) -{ - if (!ext4_handle_valid(handle)) - return 0; - if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1)) - return 0; - if (!ext4_journal_extend(handle, ext4_blocks_for_truncate(inode))) - return 0; - return 1; -} - -/* * Restart the transaction associated with *handle. This does a commit, * so before we call here everything must be consistently dirtied against * this transaction. @@ -251,760 +208,6 @@ no_delete: ext4_clear_inode(inode); /* We must guarantee clearing of inode... */ } -typedef struct { - __le32 *p; - __le32 key; - struct buffer_head *bh; -} Indirect; - -static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) -{ - p->key = *(p->p = v); - p->bh = bh; -} - -/** - * ext4_block_to_path - parse the block number into array of offsets - * @inode: inode in question (we are only interested in its superblock) - * @i_block: block number to be parsed - * @offsets: array to store the offsets in - * @boundary: set this non-zero if the referred-to block is likely to be - * followed (on disk) by an indirect block. - * - * To store the locations of file's data ext4 uses a data structure common - * for UNIX filesystems - tree of pointers anchored in the inode, with - * data blocks at leaves and indirect blocks in intermediate nodes. - * This function translates the block number into path in that tree - - * return value is the path length and @offsets[n] is the offset of - * pointer to (n+1)th node in the nth one. If @block is out of range - * (negative or too large) warning is printed and zero returned. - * - * Note: function doesn't find node addresses, so no IO is needed. All - * we need to know is the capacity of indirect blocks (taken from the - * inode->i_sb). - */ - -/* - * Portability note: the last comparison (check that we fit into triple - * indirect block) is spelled differently, because otherwise on an - * architecture with 32-bit longs and 8Kb pages we might get into trouble - * if our filesystem had 8Kb blocks. We might use long long, but that would - * kill us on x86. Oh, well, at least the sign propagation does not matter - - * i_block would have to be negative in the very beginning, so we would not - * get there at all. - */ - -static int ext4_block_to_path(struct inode *inode, - ext4_lblk_t i_block, - ext4_lblk_t offsets[4], int *boundary) -{ - int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); - int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); - const long direct_blocks = EXT4_NDIR_BLOCKS, - indirect_blocks = ptrs, - double_blocks = (1 << (ptrs_bits * 2)); - int n = 0; - int final = 0; - - if (i_block < direct_blocks) { - offsets[n++] = i_block; - final = direct_blocks; - } else if ((i_block -= direct_blocks) < indirect_blocks) { - offsets[n++] = EXT4_IND_BLOCK; - offsets[n++] = i_block; - final = ptrs; - } else if ((i_block -= indirect_blocks) < double_blocks) { - offsets[n++] = EXT4_DIND_BLOCK; - offsets[n++] = i_block >> ptrs_bits; - offsets[n++] = i_block & (ptrs - 1); - final = ptrs; - } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { - offsets[n++] = EXT4_TIND_BLOCK; - offsets[n++] = i_block >> (ptrs_bits * 2); - offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); - offsets[n++] = i_block & (ptrs - 1); - final = ptrs; - } else { - ext4_warning(inode->i_sb, "block %lu > max in inode %lu", - i_block + direct_blocks + - indirect_blocks + double_blocks, inode->i_ino); - } - if (boundary) - *boundary = final - 1 - (i_block & (ptrs - 1)); - return n; -} - -/** - * ext4_get_branch - read the chain of indirect blocks leading to data - * @inode: inode in question - * @depth: depth of the chain (1 - direct pointer, etc.) - * @offsets: offsets of pointers in inode/indirect blocks - * @chain: place to store the result - * @err: here we store the error value - * - * Function fills the array of triples and returns %NULL - * if everything went OK or the pointer to the last filled triple - * (incomplete one) otherwise. Upon the return chain[i].key contains - * the number of (i+1)-th block in the chain (as it is stored in memory, - * i.e. little-endian 32-bit), chain[i].p contains the address of that - * number (it points into struct inode for i==0 and into the bh->b_data - * for i>0) and chain[i].bh points to the buffer_head of i-th indirect - * block for i>0 and NULL for i==0. In other words, it holds the block - * numbers of the chain, addresses they were taken from (and where we can - * verify that chain did not change) and buffer_heads hosting these - * numbers. - * - * Function stops when it stumbles upon zero pointer (absent block) - * (pointer to last triple returned, *@err == 0) - * or when it gets an IO error reading an indirect block - * (ditto, *@err == -EIO) - * or when it reads all @depth-1 indirect blocks successfully and finds - * the whole chain, all way to the data (returns %NULL, *err == 0). - * - * Need to be called with - * down_read(&EXT4_I(inode)->i_data_sem) - */ -static Indirect *ext4_get_branch(struct inode *inode, int depth, - ext4_lblk_t *offsets, - Indirect chain[4], int *err) -{ - struct super_block *sb = inode->i_sb; - Indirect *p = chain; - struct buffer_head *bh; - - *err = 0; - /* i_data is not going away, no lock needed */ - add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); - if (!p->key) - goto no_block; - while (--depth) { - bh = sb_getblk(sb, le32_to_cpu(p->key)); - if (unlikely(!bh)) - goto failure; - - if (!bh_uptodate_or_lock(bh)) { - if (bh_submit_read(bh) < 0) { - put_bh(bh); - goto failure; - } - /* validate block references */ - if (ext4_check_indirect_blockref(inode, bh)) { - put_bh(bh); - goto failure; - } - } - - add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); - /* Reader: end */ - if (!p->key) - goto no_block; - } - return NULL; - -failure: - *err = -EIO; -no_block: - return p; -} - -/** - * ext4_find_near - find a place for allocation with sufficient locality - * @inode: owner - * @ind: descriptor of indirect block. - * - * This function returns the preferred place for block allocation. - * It is used when heuristic for sequential allocation fails. - * Rules are: - * + if there is a block to the left of our position - allocate near it. - * + if pointer will live in indirect block - allocate near that block. - * + if pointer will live in inode - allocate in the same - * cylinder group. - * - * In the latter case we colour the starting block by the callers PID to - * prevent it from clashing with concurrent allocations for a different inode - * in the same block group. The PID is used here so that functionally related - * files will be close-by on-disk. - * - * Caller must make sure that @ind is valid and will stay that way. - */ -static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) -{ - struct ext4_inode_info *ei = EXT4_I(inode); - __le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; - __le32 *p; - ext4_fsblk_t bg_start; - ext4_fsblk_t last_block; - ext4_grpblk_t colour; - ext4_group_t block_group; - int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); - - /* Try to find previous block */ - for (p = ind->p - 1; p >= start; p--) { - if (*p) - return le32_to_cpu(*p); - } - - /* No such thing, so let's try location of indirect block */ - if (ind->bh) - return ind->bh->b_blocknr; - - /* - * It is going to be referred to from the inode itself? OK, just put it - * into the same cylinder group then. - */ - block_group = ei->i_block_group; - if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { - block_group &= ~(flex_size-1); - if (S_ISREG(inode->i_mode)) - block_group++; - } - bg_start = ext4_group_first_block_no(inode->i_sb, block_group); - last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; - - /* - * If we are doing delayed allocation, we don't need take - * colour into account. - */ - if (test_opt(inode->i_sb, DELALLOC)) - return bg_start; - - if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) - colour = (current->pid % 16) * - (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); - else - colour = (current->pid % 16) * ((last_block - bg_start) / 16); - return bg_start + colour; -} - -/** - * ext4_find_goal - find a preferred place for allocation. - * @inode: owner - * @block: block we want - * @partial: pointer to the last triple within a chain - * - * Normally this function find the preferred place for block allocation, - * returns it. - * Because this is only used for non-extent files, we limit the block nr - * to 32 bits. - */ -static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, - Indirect *partial) -{ - ext4_fsblk_t goal; - - /* - * XXX need to get goal block from mballoc's data structures - */ - - goal = ext4_find_near(inode, partial); - goal = goal & EXT4_MAX_BLOCK_FILE_PHYS; - return goal; -} - -/** - * ext4_blks_to_allocate - Look up the block map and count the number - * of direct blocks need to be allocated for the given branch. - * - * @branch: chain of indirect blocks - * @k: number of blocks need for indirect blocks - * @blks: number of data blocks to be mapped. - * @blocks_to_boundary: the offset in the indirect block - * - * return the total number of blocks to be allocate, including the - * direct and indirect blocks. - */ -static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, - int blocks_to_boundary) -{ - unsigned int count = 0; - - /* - * Simple case, [t,d]Indirect block(s) has not allocated yet - * then it's clear blocks on that path have not allocated - */ - if (k > 0) { - /* right now we don't handle cross boundary allocation */ - if (blks < blocks_to_boundary + 1) - count += blks; - else - count += blocks_to_boundary + 1; - return count; - } - - count++; - while (count < blks && count <= blocks_to_boundary && - le32_to_cpu(*(branch[0].p + count)) == 0) { - count++; - } - return count; -} - -/** - * ext4_alloc_blocks: multiple allocate blocks needed for a branch - * @handle: handle for this transaction - * @inode: inode which needs allocated blocks - * @iblock: the logical block to start allocated at - * @goal: preferred physical block of allocation - * @indirect_blks: the number of blocks need to allocate for indirect - * blocks - * @blks: number of desired blocks - * @new_blocks: on return it will store the new block numbers for - * the indirect blocks(if needed) and the first direct block, - * @err: on return it will store the error code - * - * This function will return the number of blocks allocated as - * requested by the passed-in parameters. - */ -static int ext4_alloc_blocks(handle_t *handle, struct inode *inode, - ext4_lblk_t iblock, ext4_fsblk_t goal, - int indirect_blks, int blks, - ext4_fsblk_t new_blocks[4], int *err) -{ - struct ext4_allocation_request ar; - int target, i; - unsigned long count = 0, blk_allocated = 0; - int index = 0; - ext4_fsblk_t current_block = 0; - int ret = 0; - - /* - * Here we try to allocate the requested multiple blocks at once, - * on a best-effort basis. - * To build a branch, we should allocate blocks for - * the indirect blocks(if not allocated yet), and at least - * the first direct block of this branch. That's the - * minimum number of blocks need to allocate(required) - */ - /* first we try to allocate the indirect blocks */ - target = indirect_blks; - while (target > 0) { - count = target; - /* allocating blocks for indirect blocks and direct blocks */ - current_block = ext4_new_meta_blocks(handle, inode, goal, - 0, &count, err); - if (*err) - goto failed_out; - - if (unlikely(current_block + count > EXT4_MAX_BLOCK_FILE_PHYS)) { - EXT4_ERROR_INODE(inode, - "current_block %llu + count %lu > %d!", - current_block, count, - EXT4_MAX_BLOCK_FILE_PHYS); - *err = -EIO; - goto failed_out; - } - - target -= count; - /* allocate blocks for indirect blocks */ - while (index < indirect_blks && count) { - new_blocks[index++] = current_block++; - count--; - } - if (count > 0) { - /* - * save the new block number - * for the first direct block - */ - new_blocks[index] = current_block; - printk(KERN_INFO "%s returned more blocks than " - "requested\n", __func__); - WARN_ON(1); - break; - } - } - - target = blks - count ; - blk_allocated = count; - if (!target) - goto allocated; - /* Now allocate data blocks */ - memset(&ar, 0, sizeof(ar)); - ar.inode = inode; - ar.goal = goal; - ar.len = target; - ar.logical = iblock; - if (S_ISREG(inode->i_mode)) - /* enable in-core preallocation only for regular files */ - ar.flags = EXT4_MB_HINT_DATA; - - current_block = ext4_mb_new_blocks(handle, &ar, err); - if (unlikely(current_block + ar.len > EXT4_MAX_BLOCK_FILE_PHYS)) { - EXT4_ERROR_INODE(inode, - "current_block %llu + ar.len %d > %d!", - current_block, ar.len, - EXT4_MAX_BLOCK_FILE_PHYS); - *err = -EIO; - goto failed_out; - } - - if (*err && (target == blks)) { - /* - * if the allocation failed and we didn't allocate - * any blocks before - */ - goto failed_out; - } - if (!*err) { - if (target == blks) { - /* - * save the new block number - * for the first direct block - */ - new_blocks[index] = current_block; - } - blk_allocated += ar.len; - } -allocated: - /* total number of blocks allocated for direct blocks */ - ret = blk_allocated; - *err = 0; - return ret; -failed_out: - for (i = 0; i < index; i++) - ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, 0); - return ret; -} - -/** - * ext4_alloc_branch - allocate and set up a chain of blocks. - * @handle: handle for this transaction - * @inode: owner - * @indirect_blks: number of allocated indirect blocks - * @blks: number of allocated direct blocks - * @goal: preferred place for allocation - * @offsets: offsets (in the blocks) to store the pointers to next. - * @branch: place to store the chain in. - * - * This function allocates blocks, zeroes out all but the last one, - * links them into chain and (if we are synchronous) writes them to disk. - * In other words, it prepares a branch that can be spliced onto the - * inode. It stores the information about that chain in the branch[], in - * the same format as ext4_get_branch() would do. We are calling it after - * we had read the existing part of chain and partial points to the last - * triple of that (one with zero ->key). Upon the exit we have the same - * picture as after the successful ext4_get_block(), except that in one - * place chain is disconnected - *branch->p is still zero (we did not - * set the last link), but branch->key contains the number that should - * be placed into *branch->p to fill that gap. - * - * If allocation fails we free all blocks we've allocated (and forget - * their buffer_heads) and return the error value the from failed - * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain - * as described above and return 0. - */ -static int ext4_alloc_branch(handle_t *handle, struct inode *inode, - ext4_lblk_t iblock, int indirect_blks, - int *blks, ext4_fsblk_t goal, - ext4_lblk_t *offsets, Indirect *branch) -{ - int blocksize = inode->i_sb->s_blocksize; - int i, n = 0; - int err = 0; - struct buffer_head *bh; - int num; - ext4_fsblk_t new_blocks[4]; - ext4_fsblk_t current_block; - - num = ext4_alloc_blocks(handle, inode, iblock, goal, indirect_blks, - *blks, new_blocks, &err); - if (err) - return err; - - branch[0].key = cpu_to_le32(new_blocks[0]); - /* - * metadata blocks and data blocks are allocated. - */ - for (n = 1; n <= indirect_blks; n++) { - /* - * Get buffer_head for parent block, zero it out - * and set the pointer to new one, then send - * parent to disk. - */ - bh = sb_getblk(inode->i_sb, new_blocks[n-1]); - if (unlikely(!bh)) { - err = -EIO; - goto failed; - } - - branch[n].bh = bh; - lock_buffer(bh); - BUFFER_TRACE(bh, "call get_create_access"); - err = ext4_journal_get_create_access(handle, bh); - if (err) { - /* Don't brelse(bh) here; it's done in - * ext4_journal_forget() below */ - unlock_buffer(bh); - goto failed; - } - - memset(bh->b_data, 0, blocksize); - branch[n].p = (__le32 *) bh->b_data + offsets[n]; - branch[n].key = cpu_to_le32(new_blocks[n]); - *branch[n].p = branch[n].key; - if (n == indirect_blks) { - current_block = new_blocks[n]; - /* - * End of chain, update the last new metablock of - * the chain to point to the new allocated - * data blocks numbers - */ - for (i = 1; i < num; i++) - *(branch[n].p + i) = cpu_to_le32(++current_block); - } - BUFFER_TRACE(bh, "marking uptodate"); - set_buffer_uptodate(bh); - unlock_buffer(bh); - - BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); - err = ext4_handle_dirty_metadata(handle, inode, bh); - if (err) - goto failed; - } - *blks = num; - return err; -failed: - /* Allocation failed, free what we already allocated */ - ext4_free_blocks(handle, inode, NULL, new_blocks[0], 1, 0); - for (i = 1; i <= n ; i++) { - /* - * branch[i].bh is newly allocated, so there is no - * need to revoke the block, which is why we don't - * need to set EXT4_FREE_BLOCKS_METADATA. - */ - ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, - EXT4_FREE_BLOCKS_FORGET); - } - for (i = n+1; i < indirect_blks; i++) - ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, 0); - - ext4_free_blocks(handle, inode, NULL, new_blocks[i], num, 0); - - return err; -} - -/** - * ext4_splice_branch - splice the allocated branch onto inode. - * @handle: handle for this transaction - * @inode: owner - * @block: (logical) number of block we are adding - * @chain: chain of indirect blocks (with a missing link - see - * ext4_alloc_branch) - * @where: location of missing link - * @num: number of indirect blocks we are adding - * @blks: number of direct blocks we are adding - * - * This function fills the missing link and does all housekeeping needed in - * inode (->i_blocks, etc.). In case of success we end up with the full - * chain to new block and return 0. - */ -static int ext4_splice_branch(handle_t *handle, struct inode *inode, - ext4_lblk_t block, Indirect *where, int num, - int blks) -{ - int i; - int err = 0; - ext4_fsblk_t current_block; - - /* - * If we're splicing into a [td]indirect block (as opposed to the - * inode) then we need to get write access to the [td]indirect block - * before the splice. - */ - if (where->bh) { - BUFFER_TRACE(where->bh, "get_write_access"); - err = ext4_journal_get_write_access(handle, where->bh); - if (err) - goto err_out; - } - /* That's it */ - - *where->p = where->key; - - /* - * Update the host buffer_head or inode to point to more just allocated - * direct blocks blocks - */ - if (num == 0 && blks > 1) { - current_block = le32_to_cpu(where->key) + 1; - for (i = 1; i < blks; i++) - *(where->p + i) = cpu_to_le32(current_block++); - } - - /* We are done with atomic stuff, now do the rest of housekeeping */ - /* had we spliced it onto indirect block? */ - if (where->bh) { - /* - * If we spliced it onto an indirect block, we haven't - * altered the inode. Note however that if it is being spliced - * onto an indirect block at the very end of the file (the - * file is growing) then we *will* alter the inode to reflect - * the new i_size. But that is not done here - it is done in - * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. - */ - jbd_debug(5, "splicing indirect only\n"); - BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); - err = ext4_handle_dirty_metadata(handle, inode, where->bh); - if (err) - goto err_out; - } else { - /* - * OK, we spliced it into the inode itself on a direct block. - */ - ext4_mark_inode_dirty(handle, inode); - jbd_debug(5, "splicing direct\n"); - } - return err; - -err_out: - for (i = 1; i <= num; i++) { - /* - * branch[i].bh is newly allocated, so there is no - * need to revoke the block, which is why we don't - * need to set EXT4_FREE_BLOCKS_METADATA. - */ - ext4_free_blocks(handle, inode, where[i].bh, 0, 1, - EXT4_FREE_BLOCKS_FORGET); - } - ext4_free_blocks(handle, inode, NULL, le32_to_cpu(where[num].key), - blks, 0); - - return err; -} - -/* - * The ext4_ind_map_blocks() function handles non-extents inodes - * (i.e., using the traditional indirect/double-indirect i_blocks - * scheme) for ext4_map_blocks(). - * - * Allocation strategy is simple: if we have to allocate something, we will - * have to go the whole way to leaf. So let's do it before attaching anything - * to tree, set linkage between the newborn blocks, write them if sync is - * required, recheck the path, free and repeat if check fails, otherwise - * set the last missing link (that will protect us from any truncate-generated - * removals - all blocks on the path are immune now) and possibly force the - * write on the parent block. - * That has a nice additional property: no special recovery from the failed - * allocations is needed - we simply release blocks and do not touch anything - * reachable from inode. - * - * `handle' can be NULL if create == 0. - * - * return > 0, # of blocks mapped or allocated. - * return = 0, if plain lookup failed. - * return < 0, error case. - * - * The ext4_ind_get_blocks() function should be called with - * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem - * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or - * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system - * blocks. - */ -static int ext4_ind_map_blocks(handle_t *handle, struct inode *inode, - struct ext4_map_blocks *map, - int flags) -{ - int err = -EIO; - ext4_lblk_t offsets[4]; - Indirect chain[4]; - Indirect *partial; - ext4_fsblk_t goal; - int indirect_blks; - int blocks_to_boundary = 0; - int depth; - int count = 0; - ext4_fsblk_t first_block = 0; - - trace_ext4_ind_map_blocks_enter(inode, map->m_lblk, map->m_len, flags); - J_ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))); - J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); - depth = ext4_block_to_path(inode, map->m_lblk, offsets, - &blocks_to_boundary); - - if (depth == 0) - goto out; - - partial = ext4_get_branch(inode, depth, offsets, chain, &err); - - /* Simplest case - block found, no allocation needed */ - if (!partial) { - first_block = le32_to_cpu(chain[depth - 1].key); - count++; - /*map more blocks*/ - while (count < map->m_len && count <= blocks_to_boundary) { - ext4_fsblk_t blk; - - blk = le32_to_cpu(*(chain[depth-1].p + count)); - - if (blk == first_block + count) - count++; - else - break; - } - goto got_it; - } - - /* Next simple case - plain lookup or failed read of indirect block */ - if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO) - goto cleanup; - - /* - * Okay, we need to do block allocation. - */ - goal = ext4_find_goal(inode, map->m_lblk, partial); - - /* the number of blocks need to allocate for [d,t]indirect blocks */ - indirect_blks = (chain + depth) - partial - 1; - - /* - * Next look up the indirect map to count the totoal number of - * direct blocks to allocate for this branch. - */ - count = ext4_blks_to_allocate(partial, indirect_blks, - map->m_len, blocks_to_boundary); - /* - * Block out ext4_truncate while we alter the tree - */ - err = ext4_alloc_branch(handle, inode, map->m_lblk, indirect_blks, - &count, goal, - offsets + (partial - chain), partial); - - /* - * The ext4_splice_branch call will free and forget any buffers - * on the new chain if there is a failure, but that risks using - * up transaction credits, especially for bitmaps where the - * credits cannot be returned. Can we handle this somehow? We - * may need to return -EAGAIN upwards in the worst case. --sct - */ - if (!err) - err = ext4_splice_branch(handle, inode, map->m_lblk, - partial, indirect_blks, count); - if (err) - goto cleanup; - - map->m_flags |= EXT4_MAP_NEW; - - ext4_update_inode_fsync_trans(handle, inode, 1); -got_it: - map->m_flags |= EXT4_MAP_MAPPED; - map->m_pblk = le32_to_cpu(chain[depth-1].key); - map->m_len = count; - if (count > blocks_to_boundary) - map->m_flags |= EXT4_MAP_BOUNDARY; - err = count; - /* Clean up and exit */ - partial = chain + depth - 1; /* the whole chain */ -cleanup: - while (partial > chain) { - BUFFER_TRACE(partial->bh, "call brelse"); - brelse(partial->bh); - partial--; - } -out: - trace_ext4_ind_map_blocks_exit(inode, map->m_lblk, - map->m_pblk, map->m_len, err); - return err; -} - #ifdef CONFIG_QUOTA qsize_t *ext4_get_reserved_space(struct inode *inode) { @@ -1014,32 +217,6 @@ qsize_t *ext4_get_reserved_space(struct inode *inode) /* * Calculate the number of metadata blocks need to reserve - * to allocate a new block at @lblocks for non extent file based file - */ -static int ext4_ind_calc_metadata_amount(struct inode *inode, sector_t lblock) -{ - struct ext4_inode_info *ei = EXT4_I(inode); - sector_t dind_mask = ~((sector_t)EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1); - int blk_bits; - - if (lblock < EXT4_NDIR_BLOCKS) - return 0; - - lblock -= EXT4_NDIR_BLOCKS; - - if (ei->i_da_metadata_calc_len && - (lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) { - ei->i_da_metadata_calc_len++; - return 0; - } - ei->i_da_metadata_calc_last_lblock = lblock & dind_mask; - ei->i_da_metadata_calc_len = 1; - blk_bits = order_base_2(lblock); - return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1; -} - -/* - * Calculate the number of metadata blocks need to reserve * to allocate a block located at @lblock */ static int ext4_calc_metadata_amount(struct inode *inode, ext4_lblk_t lblock) @@ -3380,114 +2557,6 @@ static int ext4_releasepage(struct page *page, gfp_t wait) } /* - * O_DIRECT for ext3 (or indirect map) based files - * - * If the O_DIRECT write will extend the file then add this inode to the - * orphan list. So recovery will truncate it back to the original size - * if the machine crashes during the write. - * - * If the O_DIRECT write is intantiating holes inside i_size and the machine - * crashes then stale disk data _may_ be exposed inside the file. But current - * VFS code falls back into buffered path in that case so we are safe. - */ -static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, - unsigned long nr_segs) -{ - struct file *file = iocb->ki_filp; - struct inode *inode = file->f_mapping->host; - struct ext4_inode_info *ei = EXT4_I(inode); - handle_t *handle; - ssize_t ret; - int orphan = 0; - size_t count = iov_length(iov, nr_segs); - int retries = 0; - - if (rw == WRITE) { - loff_t final_size = offset + count; - - if (final_size > inode->i_size) { - /* Credits for sb + inode write */ - handle = ext4_journal_start(inode, 2); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out; - } - ret = ext4_orphan_add(handle, inode); - if (ret) { - ext4_journal_stop(handle); - goto out; - } - orphan = 1; - ei->i_disksize = inode->i_size; - ext4_journal_stop(handle); - } - } - -retry: - if (rw == READ && ext4_should_dioread_nolock(inode)) - ret = __blockdev_direct_IO(rw, iocb, inode, - inode->i_sb->s_bdev, iov, - offset, nr_segs, - ext4_get_block, NULL, NULL, 0); - else { - ret = blockdev_direct_IO(rw, iocb, inode, - inode->i_sb->s_bdev, iov, - offset, nr_segs, - ext4_get_block, NULL); - - if (unlikely((rw & WRITE) && ret < 0)) { - loff_t isize = i_size_read(inode); - loff_t end = offset + iov_length(iov, nr_segs); - - if (end > isize) - ext4_truncate_failed_write(inode); - } - } - if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) - goto retry; - - if (orphan) { - int err; - - /* Credits for sb + inode write */ - handle = ext4_journal_start(inode, 2); - if (IS_ERR(handle)) { - /* This is really bad luck. We've written the data - * but cannot extend i_size. Bail out and pretend - * the write failed... */ - ret = PTR_ERR(handle); - if (inode->i_nlink) - ext4_orphan_del(NULL, inode); - - goto out; - } - if (inode->i_nlink) - ext4_orphan_del(handle, inode); - if (ret > 0) { - loff_t end = offset + ret; - if (end > inode->i_size) { - ei->i_disksize = end; - i_size_write(inode, end); - /* - * We're going to return a positive `ret' - * here due to non-zero-length I/O, so there's - * no way of reporting error returns from - * ext4_mark_inode_dirty() to userspace. So - * ignore it. - */ - ext4_mark_inode_dirty(handle, inode); - } - } - err = ext4_journal_stop(handle); - if (ret == 0) - ret = err; - } -out: - return ret; -} - -/* * ext4_get_block used when preparing for a DIO write or buffer write. * We allocate an uinitialized extent if blocks haven't been allocated. * The extent will be converted to initialized after the IO is complete. @@ -3958,383 +3027,6 @@ unlock: return err; } -/* - * Probably it should be a library function... search for first non-zero word - * or memcmp with zero_page, whatever is better for particular architecture. - * Linus? - */ -static inline int all_zeroes(__le32 *p, __le32 *q) -{ - while (p < q) - if (*p++) - return 0; - return 1; -} - -/** - * ext4_find_shared - find the indirect blocks for partial truncation. - * @inode: inode in question - * @depth: depth of the affected branch - * @offsets: offsets of pointers in that branch (see ext4_block_to_path) - * @chain: place to store the pointers to partial indirect blocks - * @top: place to the (detached) top of branch - * - * This is a helper function used by ext4_truncate(). - * - * When we do truncate() we may have to clean the ends of several - * indirect blocks but leave the blocks themselves alive. Block is - * partially truncated if some data below the new i_size is referred - * from it (and it is on the path to the first completely truncated - * data block, indeed). We have to free the top of that path along - * with everything to the right of the path. Since no allocation - * past the truncation point is possible until ext4_truncate() - * finishes, we may safely do the latter, but top of branch may - * require special attention - pageout below the truncation point - * might try to populate it. - * - * We atomically detach the top of branch from the tree, store the - * block number of its root in *@top, pointers to buffer_heads of - * partially truncated blocks - in @chain[].bh and pointers to - * their last elements that should not be removed - in - * @chain[].p. Return value is the pointer to last filled element - * of @chain. - * - * The work left to caller to do the actual freeing of subtrees: - * a) free the subtree starting from *@top - * b) free the subtrees whose roots are stored in - * (@chain[i].p+1 .. end of @chain[i].bh->b_data) - * c) free the subtrees growing from the inode past the @chain[0]. - * (no partially truncated stuff there). */ - -static Indirect *ext4_find_shared(struct inode *inode, int depth, - ext4_lblk_t offsets[4], Indirect chain[4], - __le32 *top) -{ - Indirect *partial, *p; - int k, err; - - *top = 0; - /* Make k index the deepest non-null offset + 1 */ - for (k = depth; k > 1 && !offsets[k-1]; k--) - ; - partial = ext4_get_branch(inode, k, offsets, chain, &err); - /* Writer: pointers */ - if (!partial) - partial = chain + k-1; - /* - * If the branch acquired continuation since we've looked at it - - * fine, it should all survive and (new) top doesn't belong to us. - */ - if (!partial->key && *partial->p) - /* Writer: end */ - goto no_top; - for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) - ; - /* - * OK, we've found the last block that must survive. The rest of our - * branch should be detached before unlocking. However, if that rest - * of branch is all ours and does not grow immediately from the inode - * it's easier to cheat and just decrement partial->p. - */ - if (p == chain + k - 1 && p > chain) { - p->p--; - } else { - *top = *p->p; - /* Nope, don't do this in ext4. Must leave the tree intact */ -#if 0 - *p->p = 0; -#endif - } - /* Writer: end */ - - while (partial > p) { - brelse(partial->bh); - partial--; - } -no_top: - return partial; -} - -/* - * Zero a number of block pointers in either an inode or an indirect block. - * If we restart the transaction we must again get write access to the - * indirect block for further modification. - * - * We release `count' blocks on disk, but (last - first) may be greater - * than `count' because there can be holes in there. - * - * Return 0 on success, 1 on invalid block range - * and < 0 on fatal error. - */ -static int ext4_clear_blocks(handle_t *handle, struct inode *inode, - struct buffer_head *bh, - ext4_fsblk_t block_to_free, - unsigned long count, __le32 *first, - __le32 *last) -{ - __le32 *p; - int flags = EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_VALIDATED; - int err; - - if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) - flags |= EXT4_FREE_BLOCKS_METADATA; - - if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free, - count)) { - EXT4_ERROR_INODE(inode, "attempt to clear invalid " - "blocks %llu len %lu", - (unsigned long long) block_to_free, count); - return 1; - } - - if (try_to_extend_transaction(handle, inode)) { - if (bh) { - BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); - err = ext4_handle_dirty_metadata(handle, inode, bh); - if (unlikely(err)) - goto out_err; - } - err = ext4_mark_inode_dirty(handle, inode); - if (unlikely(err)) - goto out_err; - err = ext4_truncate_restart_trans(handle, inode, - ext4_blocks_for_truncate(inode)); - if (unlikely(err)) - goto out_err; - if (bh) { - BUFFER_TRACE(bh, "retaking write access"); - err = ext4_journal_get_write_access(handle, bh); - if (unlikely(err)) - goto out_err; - } - } - - for (p = first; p < last; p++) - *p = 0; - - ext4_free_blocks(handle, inode, NULL, block_to_free, count, flags); - return 0; -out_err: - ext4_std_error(inode->i_sb, err); - return err; -} - -/** - * ext4_free_data - free a list of data blocks - * @handle: handle for this transaction - * @inode: inode we are dealing with - * @this_bh: indirect buffer_head which contains *@first and *@last - * @first: array of block numbers - * @last: points immediately past the end of array - * - * We are freeing all blocks referred from that array (numbers are stored as - * little-endian 32-bit) and updating @inode->i_blocks appropriately. - * - * We accumulate contiguous runs of blocks to free. Conveniently, if these - * blocks are contiguous then releasing them at one time will only affect one - * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't - * actually use a lot of journal space. - * - * @this_bh will be %NULL if @first and @last point into the inode's direct - * block pointers. - */ -static void ext4_free_data(handle_t *handle, struct inode *inode, - struct buffer_head *this_bh, - __le32 *first, __le32 *last) -{ - ext4_fsblk_t block_to_free = 0; /* Starting block # of a run */ - unsigned long count = 0; /* Number of blocks in the run */ - __le32 *block_to_free_p = NULL; /* Pointer into inode/ind - corresponding to - block_to_free */ - ext4_fsblk_t nr; /* Current block # */ - __le32 *p; /* Pointer into inode/ind - for current block */ - int err = 0; - - if (this_bh) { /* For indirect block */ - BUFFER_TRACE(this_bh, "get_write_access"); - err = ext4_journal_get_write_access(handle, this_bh); - /* Important: if we can't update the indirect pointers - * to the blocks, we can't free them. */ - if (err) - return; - } - - for (p = first; p < last; p++) { - nr = le32_to_cpu(*p); - if (nr) { - /* accumulate blocks to free if they're contiguous */ - if (count == 0) { - block_to_free = nr; - block_to_free_p = p; - count = 1; - } else if (nr == block_to_free + count) { - count++; - } else { - err = ext4_clear_blocks(handle, inode, this_bh, - block_to_free, count, - block_to_free_p, p); - if (err) - break; - block_to_free = nr; - block_to_free_p = p; - count = 1; - } - } - } - - if (!err && count > 0) - err = ext4_clear_blocks(handle, inode, this_bh, block_to_free, - count, block_to_free_p, p); - if (err < 0) - /* fatal error */ - return; - - if (this_bh) { - BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); - - /* - * The buffer head should have an attached journal head at this - * point. However, if the data is corrupted and an indirect - * block pointed to itself, it would have been detached when - * the block was cleared. Check for this instead of OOPSing. - */ - if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) - ext4_handle_dirty_metadata(handle, inode, this_bh); - else - EXT4_ERROR_INODE(inode, - "circular indirect block detected at " - "block %llu", - (unsigned long long) this_bh->b_blocknr); - } -} - -/** - * ext4_free_branches - free an array of branches - * @handle: JBD handle for this transaction - * @inode: inode we are dealing with - * @parent_bh: the buffer_head which contains *@first and *@last - * @first: array of block numbers - * @last: pointer immediately past the end of array - * @depth: depth of the branches to free - * - * We are freeing all blocks referred from these branches (numbers are - * stored as little-endian 32-bit) and updating @inode->i_blocks - * appropriately. - */ -static void ext4_free_branches(handle_t *handle, struct inode *inode, - struct buffer_head *parent_bh, - __le32 *first, __le32 *last, int depth) -{ - ext4_fsblk_t nr; - __le32 *p; - - if (ext4_handle_is_aborted(handle)) - return; - - if (depth--) { - struct buffer_head *bh; - int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); - p = last; - while (--p >= first) { - nr = le32_to_cpu(*p); - if (!nr) - continue; /* A hole */ - - if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), - nr, 1)) { - EXT4_ERROR_INODE(inode, - "invalid indirect mapped " - "block %lu (level %d)", - (unsigned long) nr, depth); - break; - } - - /* Go read the buffer for the next level down */ - bh = sb_bread(inode->i_sb, nr); - - /* - * A read failure? Report error and clear slot - * (should be rare). - */ - if (!bh) { - EXT4_ERROR_INODE_BLOCK(inode, nr, - "Read failure"); - continue; - } - - /* This zaps the entire block. Bottom up. */ - BUFFER_TRACE(bh, "free child branches"); - ext4_free_branches(handle, inode, bh, - (__le32 *) bh->b_data, - (__le32 *) bh->b_data + addr_per_block, - depth); - brelse(bh); - - /* - * Everything below this this pointer has been - * released. Now let this top-of-subtree go. - * - * We want the freeing of this indirect block to be - * atomic in the journal with the updating of the - * bitmap block which owns it. So make some room in - * the journal. - * - * We zero the parent pointer *after* freeing its - * pointee in the bitmaps, so if extend_transaction() - * for some reason fails to put the bitmap changes and - * the release into the same transaction, recovery - * will merely complain about releasing a free block, - * rather than leaking blocks. - */ - if (ext4_handle_is_aborted(handle)) - return; - if (try_to_extend_transaction(handle, inode)) { - ext4_mark_inode_dirty(handle, inode); - ext4_truncate_restart_trans(handle, inode, - ext4_blocks_for_truncate(inode)); - } - - /* - * The forget flag here is critical because if - * we are journaling (and not doing data - * journaling), we have to make sure a revoke - * record is written to prevent the journal - * replay from overwriting the (former) - * indirect block if it gets reallocated as a - * data block. This must happen in the same - * transaction where the data blocks are - * actually freed. - */ - ext4_free_blocks(handle, inode, NULL, nr, 1, - EXT4_FREE_BLOCKS_METADATA| - EXT4_FREE_BLOCKS_FORGET); - - if (parent_bh) { - /* - * The block which we have just freed is - * pointed to by an indirect block: journal it - */ - BUFFER_TRACE(parent_bh, "get_write_access"); - if (!ext4_journal_get_write_access(handle, - parent_bh)){ - *p = 0; - BUFFER_TRACE(parent_bh, - "call ext4_handle_dirty_metadata"); - ext4_handle_dirty_metadata(handle, - inode, - parent_bh); - } - } - } - } else { - /* We have reached the bottom of the tree. */ - BUFFER_TRACE(parent_bh, "free data blocks"); - ext4_free_data(handle, inode, parent_bh, first, last); - } -} - int ext4_can_truncate(struct inode *inode) { if (S_ISREG(inode->i_mode)) @@ -4419,161 +3111,6 @@ void ext4_truncate(struct inode *inode) trace_ext4_truncate_exit(inode); } -void ext4_ind_truncate(struct inode *inode) -{ - handle_t *handle; - struct ext4_inode_info *ei = EXT4_I(inode); - __le32 *i_data = ei->i_data; - int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); - struct address_space *mapping = inode->i_mapping; - ext4_lblk_t offsets[4]; - Indirect chain[4]; - Indirect *partial; - __le32 nr = 0; - int n = 0; - ext4_lblk_t last_block, max_block; - unsigned blocksize = inode->i_sb->s_blocksize; - - handle = start_transaction(inode); - if (IS_ERR(handle)) - return; /* AKPM: return what? */ - - last_block = (inode->i_size + blocksize-1) - >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); - max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1) - >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); - - if (inode->i_size & (blocksize - 1)) - if (ext4_block_truncate_page(handle, mapping, inode->i_size)) - goto out_stop; - - if (last_block != max_block) { - n = ext4_block_to_path(inode, last_block, offsets, NULL); - if (n == 0) - goto out_stop; /* error */ - } - - /* - * OK. This truncate is going to happen. We add the inode to the - * orphan list, so that if this truncate spans multiple transactions, - * and we crash, we will resume the truncate when the filesystem - * recovers. It also marks the inode dirty, to catch the new size. - * - * Implication: the file must always be in a sane, consistent - * truncatable state while each transaction commits. - */ - if (ext4_orphan_add(handle, inode)) - goto out_stop; - - /* - * From here we block out all ext4_get_block() callers who want to - * modify the block allocation tree. - */ - down_write(&ei->i_data_sem); - - ext4_discard_preallocations(inode); - - /* - * The orphan list entry will now protect us from any crash which - * occurs before the truncate completes, so it is now safe to propagate - * the new, shorter inode size (held for now in i_size) into the - * on-disk inode. We do this via i_disksize, which is the value which - * ext4 *really* writes onto the disk inode. - */ - ei->i_disksize = inode->i_size; - - if (last_block == max_block) { - /* - * It is unnecessary to free any data blocks if last_block is - * equal to the indirect block limit. - */ - goto out_unlock; - } else if (n == 1) { /* direct blocks */ - ext4_free_data(handle, inode, NULL, i_data+offsets[0], - i_data + EXT4_NDIR_BLOCKS); - goto do_indirects; - } - - partial = ext4_find_shared(inode, n, offsets, chain, &nr); - /* Kill the top of shared branch (not detached) */ - if (nr) { - if (partial == chain) { - /* Shared branch grows from the inode */ - ext4_free_branches(handle, inode, NULL, - &nr, &nr+1, (chain+n-1) - partial); - *partial->p = 0; - /* - * We mark the inode dirty prior to restart, - * and prior to stop. No need for it here. - */ - } else { - /* Shared branch grows from an indirect block */ - BUFFER_TRACE(partial->bh, "get_write_access"); - ext4_free_branches(handle, inode, partial->bh, - partial->p, - partial->p+1, (chain+n-1) - partial); - } - } - /* Clear the ends of indirect blocks on the shared branch */ - while (partial > chain) { - ext4_free_branches(handle, inode, partial->bh, partial->p + 1, - (__le32*)partial->bh->b_data+addr_per_block, - (chain+n-1) - partial); - BUFFER_TRACE(partial->bh, "call brelse"); - brelse(partial->bh); - partial--; - } -do_indirects: - /* Kill the remaining (whole) subtrees */ - switch (offsets[0]) { - default: - nr = i_data[EXT4_IND_BLOCK]; - if (nr) { - ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); - i_data[EXT4_IND_BLOCK] = 0; - } - case EXT4_IND_BLOCK: - nr = i_data[EXT4_DIND_BLOCK]; - if (nr) { - ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); - i_data[EXT4_DIND_BLOCK] = 0; - } - case EXT4_DIND_BLOCK: - nr = i_data[EXT4_TIND_BLOCK]; - if (nr) { - ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); - i_data[EXT4_TIND_BLOCK] = 0; - } - case EXT4_TIND_BLOCK: - ; - } - -out_unlock: - up_write(&ei->i_data_sem); - inode->i_mtime = inode->i_ctime = ext4_current_time(inode); - ext4_mark_inode_dirty(handle, inode); - - /* - * In a multi-transaction truncate, we only make the final transaction - * synchronous - */ - if (IS_SYNC(inode)) - ext4_handle_sync(handle); -out_stop: - /* - * If this was a simple ftruncate(), and the file will remain alive - * then we need to clear up the orphan record which we created above. - * However, if this was a real unlink then we were called by - * ext4_delete_inode(), and we allow that function to clean up the - * orphan info for us. - */ - if (inode->i_nlink) - ext4_orphan_del(handle, inode); - - ext4_journal_stop(handle); - trace_ext4_truncate_exit(inode); -} - /* * ext4_get_inode_loc returns with an extra refcount against the inode's * underlying buffer_head on success. If 'in_mem' is true, we have all @@ -5386,29 +3923,6 @@ int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry, return 0; } -static int ext4_ind_trans_blocks(struct inode *inode, int nrblocks, int chunk) -{ - int indirects; - - /* if nrblocks are contiguous */ - if (chunk) { - /* - * With N contiguous data blocks, we need at most - * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks, - * 2 dindirect blocks, and 1 tindirect block - */ - return DIV_ROUND_UP(nrblocks, - EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4; - } - /* - * if nrblocks are not contiguous, worse case, each block touch - * a indirect block, and each indirect block touch a double indirect - * block, plus a triple indirect block - */ - indirects = nrblocks * 2 + 1; - return indirects; -} - static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk) { if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) -- cgit v0.10.2 From 3127c6b225c6893bdfcd4db64d4316ce317fc10f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Jun 2011 13:44:37 +0900 Subject: serial: sh-sci: Regtype probing doesn't need to be fatal. This was using a BUG_ON(), but it's not strictly necessary, so relax the constraints a bit. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 8e55e0a..5ff6657 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1825,6 +1825,7 @@ static int __devinit sci_init_single(struct platform_device *dev, struct plat_sci_port *p) { struct uart_port *port = &sci_port->port; + int ret; port->ops = &sci_uart_ops; port->iotype = UPIO_MEM; @@ -1845,8 +1846,11 @@ static int __devinit sci_init_single(struct platform_device *dev, break; } - if (p->regtype == SCIx_PROBE_REGTYPE) - BUG_ON(sci_probe_regmap(p) != 0); + if (p->regtype == SCIx_PROBE_REGTYPE) { + ret = sci_probe_regmap(p); + if (unlikely(!ret)) + return ret; + } if (dev) { sci_port->iclk = clk_get(&dev->dev, "sci_ick"); -- cgit v0.10.2 From 7f405f9c3117acfa8a9775c467ab433b23abc5a7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Jun 2011 13:47:40 +0900 Subject: serial: sh-sci: Add missing module description/author bits. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 5ff6657..fa99b00 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2211,3 +2211,5 @@ module_exit(sci_exit); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:sh-sci"); +MODULE_AUTHOR("Paul Mundt"); +MODULE_DESCRIPTION("SuperH SCI(F) serial driver"); -- cgit v0.10.2 From 23241d43eac88f63a7f0bf4d5c12bbc496651585 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Jun 2011 13:55:31 +0900 Subject: serial: sh-sci: Kill off per-port enable/disable callbacks. Ultimately we want everything to be going through the clock framework and runtime pm, so kill off the per-port callbacks that enabled ports to bypass the common infrastructure. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index fa99b00..9c8624d 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -62,12 +62,6 @@ struct sci_port { /* Platform configuration */ struct plat_sci_port *cfg; - /* Port enable callback */ - void (*enable)(struct uart_port *port); - - /* Port disable callback */ - void (*disable)(struct uart_port *port); - /* Break timer */ struct timer_list break_timer; int break_flag; @@ -366,6 +360,29 @@ static int sci_probe_regmap(struct plat_sci_port *cfg) return 0; } +static void sci_port_enable(struct sci_port *sci_port) +{ + if (!sci_port->port.dev) + return; + + pm_runtime_get_sync(sci_port->port.dev); + + clk_enable(sci_port->iclk); + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); + clk_enable(sci_port->fclk); +} + +static void sci_port_disable(struct sci_port *sci_port) +{ + if (!sci_port->port.dev) + return; + + clk_disable(sci_port->fclk); + clk_disable(sci_port->iclk); + + pm_runtime_put_sync(sci_port->port.dev); +} + #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) #ifdef CONFIG_CONSOLE_POLL @@ -651,8 +668,7 @@ static void sci_break_timer(unsigned long data) { struct sci_port *port = (struct sci_port *)data; - if (port->enable) - port->enable(&port->port); + sci_port_enable(port); if (sci_rxd_in(&port->port) == 0) { port->break_flag = 1; @@ -664,8 +680,7 @@ static void sci_break_timer(unsigned long data) } else port->break_flag = 0; - if (port->disable) - port->disable(&port->port); + sci_port_disable(port); } static int sci_handle_errors(struct uart_port *port) @@ -939,27 +954,6 @@ static int sci_notifier(struct notifier_block *self, return NOTIFY_OK; } -static void sci_clk_enable(struct uart_port *port) -{ - struct sci_port *sci_port = to_sci_port(port); - - pm_runtime_get_sync(port->dev); - - clk_enable(sci_port->iclk); - sci_port->port.uartclk = clk_get_rate(sci_port->iclk); - clk_enable(sci_port->fclk); -} - -static void sci_clk_disable(struct uart_port *port) -{ - struct sci_port *sci_port = to_sci_port(port); - - clk_disable(sci_port->fclk); - clk_disable(sci_port->iclk); - - pm_runtime_put_sync(port->dev); -} - static int sci_request_irq(struct sci_port *port) { int i; @@ -1537,8 +1531,7 @@ static int sci_startup(struct uart_port *port) dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - if (s->enable) - s->enable(port); + sci_port_enable(s); ret = sci_request_irq(s); if (unlikely(ret < 0)) @@ -1564,8 +1557,7 @@ static void sci_shutdown(struct uart_port *port) sci_free_dma(port); sci_free_irq(s); - if (s->disable) - s->disable(port); + sci_port_disable(s); } static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, @@ -1612,8 +1604,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, if (likely(baud && port->uartclk)) t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk); - if (s->enable) - s->enable(port); + sci_port_enable(s); do { status = sci_in(port, SCxSR); @@ -1683,8 +1674,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, if ((termios->c_cflag & CREAD) != 0) sci_start_rx(port); - if (s->disable) - s->disable(port); + sci_port_disable(s); } static const char *sci_type(struct uart_port *port) @@ -1870,8 +1860,6 @@ static int __devinit sci_init_single(struct platform_device *dev, if (IS_ERR(sci_port->fclk)) sci_port->fclk = NULL; - sci_port->enable = sci_clk_enable; - sci_port->disable = sci_clk_disable; port->dev = &dev->dev; pm_runtime_enable(&dev->dev); @@ -1950,8 +1938,7 @@ static void serial_console_write(struct console *co, const char *s, struct uart_port *port = &sci_port->port; unsigned short bits; - if (sci_port->enable) - sci_port->enable(port); + sci_port_enable(sci_port); uart_console_write(port, s, count, serial_console_putchar); @@ -1960,8 +1947,7 @@ static void serial_console_write(struct console *co, const char *s, while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); - if (sci_port->disable) - sci_port->disable(port); + sci_port_disable(sci_port); } static int __devinit serial_console_setup(struct console *co, char *options) @@ -1993,8 +1979,7 @@ static int __devinit serial_console_setup(struct console *co, char *options) if (unlikely(ret != 0)) return ret; - if (sci_port->enable) - sci_port->enable(port); + sci_port_enable(sci_port); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); -- cgit v0.10.2 From 9174fc8f111982e024a00512c521ad8f1056fccb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Jun 2011 15:25:36 +0900 Subject: serial: sh-sci: Fix up pretty name printing for port IRQs. Presently these were all using the same static string with no regard to dev_name() and the like. This implements a bit of rework to name the IRQ dynamically, as it should have been doing all along anyways. Signed-off-by: Paul Mundt diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 9c8624d..d0a5623 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -71,6 +71,8 @@ struct sci_port { /* Function clock */ struct clk *fclk; + char *irqstr[SCIx_NR_IRQS]; + struct dma_chan *chan_tx; struct dma_chan *chan_rx; @@ -954,53 +956,102 @@ static int sci_notifier(struct notifier_block *self, return NOTIFY_OK; } +static struct sci_irq_desc { + const char *desc; + irq_handler_t handler; +} sci_irq_desc[] = { + /* + * Split out handlers, the default case. + */ + [SCIx_ERI_IRQ] = { + .desc = "rx err", + .handler = sci_er_interrupt, + }, + + [SCIx_RXI_IRQ] = { + .desc = "rx full", + .handler = sci_rx_interrupt, + }, + + [SCIx_TXI_IRQ] = { + .desc = "tx empty", + .handler = sci_tx_interrupt, + }, + + [SCIx_BRI_IRQ] = { + .desc = "break", + .handler = sci_br_interrupt, + }, + + /* + * Special muxed handler. + */ + [SCIx_MUX_IRQ] = { + .desc = "mux", + .handler = sci_mpxed_interrupt, + }, +}; + static int sci_request_irq(struct sci_port *port) { - int i; - irqreturn_t (*handlers[4])(int irq, void *ptr) = { - sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt, - sci_br_interrupt, - }; - const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full", - "SCI Transmit Data Empty", "SCI Break" }; - - if (port->cfg->irqs[0] == port->cfg->irqs[1]) { - if (unlikely(!port->cfg->irqs[0])) - return -ENODEV; - - if (request_irq(port->cfg->irqs[0], sci_mpxed_interrupt, - IRQF_DISABLED, "sci", port)) { - dev_err(port->port.dev, "Can't allocate IRQ\n"); - return -ENODEV; + struct uart_port *up = &port->port; + int i, j, ret = 0; + + for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { + struct sci_irq_desc *desc; + unsigned int irq; + + if (SCIx_IRQ_IS_MUXED(port)) { + i = SCIx_MUX_IRQ; + irq = up->irq; + } else + irq = port->cfg->irqs[i]; + + desc = sci_irq_desc + i; + port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s", + dev_name(up->dev), desc->desc); + if (!port->irqstr[j]) { + dev_err(up->dev, "Failed to allocate %s IRQ string\n", + desc->desc); + goto out_nomem; } - } else { - for (i = 0; i < ARRAY_SIZE(handlers); i++) { - if (unlikely(!port->cfg->irqs[i])) - continue; - - if (request_irq(port->cfg->irqs[i], handlers[i], - IRQF_DISABLED, desc[i], port)) { - dev_err(port->port.dev, "Can't allocate IRQ\n"); - return -ENODEV; - } + + ret = request_irq(irq, desc->handler, up->irqflags, + port->irqstr[j], port); + if (unlikely(ret)) { + dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc); + goto out_noirq; } } return 0; + +out_noirq: + while (--i >= 0) + free_irq(port->cfg->irqs[i], port); + +out_nomem: + while (--j >= 0) + kfree(port->irqstr[j]); + + return ret; } static void sci_free_irq(struct sci_port *port) { int i; - if (port->cfg->irqs[0] == port->cfg->irqs[1]) - free_irq(port->cfg->irqs[0], port); - else { - for (i = 0; i < ARRAY_SIZE(port->cfg->irqs); i++) { - if (!port->cfg->irqs[i]) - continue; + /* + * Intentionally in reverse order so we iterate over the muxed + * IRQ first. + */ + for (i = 0; i < SCIx_NR_IRQS; i++) { + free_irq(port->cfg->irqs[i], port); + kfree(port->irqstr[i]); - free_irq(port->cfg->irqs[i], port); + if (SCIx_IRQ_IS_MUXED(port)) { + /* If there's only one IRQ, we're done. */ + return; } } } @@ -1910,6 +1961,7 @@ static int __devinit sci_init_single(struct platform_device *dev, * For the muxed case there's nothing more to do. */ port->irq = p->irqs[SCIx_RXI_IRQ]; + port->irqflags = IRQF_DISABLED; port->serial_in = sci_serial_in; port->serial_out = sci_serial_out; diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 4ca130a..8bffe9a 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -56,6 +56,8 @@ enum { SCIx_TXI_IRQ, SCIx_BRI_IRQ, SCIx_NR_IRQS, + + SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ }; enum { @@ -82,6 +84,11 @@ enum { [SCIx_BRI_IRQ] = (irq), \ } +#define SCIx_IRQ_IS_MUXED(port) \ + ((port)->cfg->irqs[SCIx_ERI_IRQ] == \ + (port)->cfg->irqs[SCIx_RXI_IRQ]) || \ + ((port)->cfg->irqs[SCIx_ERI_IRQ] && \ + !(port)->cfg->irqs[SCIx_RXI_IRQ]) /* * SCI register subset common for all port types. * Not all registers will exist on all parts. -- cgit v0.10.2 From f86186b44b4164600cce03d0d93ad48ec21fa429 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 28 Jun 2011 10:01:31 -0400 Subject: ext4: refactor duplicated block placement code I found that ext4_ext_find_goal() and ext4_find_near() share the same code for returning a coloured start block based on i_block_group. We can refactor this into a common function so that they don't diverge in the future. Thanks to adilger for suggesting the new function name. Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 264f694..f8224ad 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -620,3 +620,51 @@ unsigned long ext4_bg_num_gdb(struct super_block *sb, ext4_group_t group) } +/** + * ext4_inode_to_goal_block - return a hint for block allocation + * @inode: inode for block allocation + * + * Return the ideal location to start allocating blocks for a + * newly created inode. + */ +ext4_fsblk_t ext4_inode_to_goal_block(struct inode *inode) +{ + struct ext4_inode_info *ei = EXT4_I(inode); + ext4_group_t block_group; + ext4_grpblk_t colour; + int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); + ext4_fsblk_t bg_start; + ext4_fsblk_t last_block; + + block_group = ei->i_block_group; + if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { + /* + * If there are at least EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME + * block groups per flexgroup, reserve the first block + * group for directories and special files. Regular + * files will start at the second block group. This + * tends to speed up directory access and improves + * fsck times. + */ + block_group &= ~(flex_size-1); + if (S_ISREG(inode->i_mode)) + block_group++; + } + bg_start = ext4_group_first_block_no(inode->i_sb, block_group); + last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; + + /* + * If we are doing delayed allocation, we don't need take + * colour into account. + */ + if (test_opt(inode->i_sb, DELALLOC)) + return bg_start; + + if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) + colour = (current->pid % 16) * + (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); + else + colour = (current->pid % 16) * ((last_block - bg_start) / 16); + return bg_start + colour; +} + diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index ddaf504..49d2cea 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1743,6 +1743,7 @@ extern unsigned ext4_init_block_bitmap(struct super_block *sb, struct ext4_group_desc *desc); #define ext4_free_blocks_after_init(sb, group, desc) \ ext4_init_block_bitmap(sb, NULL, group, desc) +ext4_fsblk_t ext4_inode_to_goal_block(struct inode *); /* dir.c */ extern int __ext4_check_dir_entry(const char *, unsigned int, struct inode *, diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index eb63c7b..f331e50 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -114,12 +114,6 @@ static ext4_fsblk_t ext4_ext_find_goal(struct inode *inode, struct ext4_ext_path *path, ext4_lblk_t block) { - struct ext4_inode_info *ei = EXT4_I(inode); - ext4_fsblk_t bg_start; - ext4_fsblk_t last_block; - ext4_grpblk_t colour; - ext4_group_t block_group; - int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); int depth; if (path) { @@ -161,36 +155,7 @@ static ext4_fsblk_t ext4_ext_find_goal(struct inode *inode, } /* OK. use inode's group */ - block_group = ei->i_block_group; - if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { - /* - * If there are at least EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME - * block groups per flexgroup, reserve the first block - * group for directories and special files. Regular - * files will start at the second block group. This - * tends to speed up directory access and improves - * fsck times. - */ - block_group &= ~(flex_size-1); - if (S_ISREG(inode->i_mode)) - block_group++; - } - bg_start = ext4_group_first_block_no(inode->i_sb, block_group); - last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; - - /* - * If we are doing delayed allocation, we don't need take - * colour into account. - */ - if (test_opt(inode->i_sb, DELALLOC)) - return bg_start; - - if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) - colour = (current->pid % 16) * - (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); - else - colour = (current->pid % 16) * ((last_block - bg_start) / 16); - return bg_start + colour + block; + return ext4_inode_to_goal_block(inode); } /* diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c index c3e85a8..6c27111 100644 --- a/fs/ext4/indirect.c +++ b/fs/ext4/indirect.c @@ -207,11 +207,6 @@ static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) struct ext4_inode_info *ei = EXT4_I(inode); __le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; __le32 *p; - ext4_fsblk_t bg_start; - ext4_fsblk_t last_block; - ext4_grpblk_t colour; - ext4_group_t block_group; - int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); /* Try to find previous block */ for (p = ind->p - 1; p >= start; p--) { @@ -227,28 +222,7 @@ static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) * It is going to be referred to from the inode itself? OK, just put it * into the same cylinder group then. */ - block_group = ei->i_block_group; - if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { - block_group &= ~(flex_size-1); - if (S_ISREG(inode->i_mode)) - block_group++; - } - bg_start = ext4_group_first_block_no(inode->i_sb, block_group); - last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; - - /* - * If we are doing delayed allocation, we don't need take - * colour into account. - */ - if (test_opt(inode->i_sb, DELALLOC)) - return bg_start; - - if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) - colour = (current->pid % 16) * - (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); - else - colour = (current->pid % 16) * ((last_block - bg_start) / 16); - return bg_start + colour; + return ext4_inode_to_goal_block(inode); } /** -- cgit v0.10.2 From 9331b6261058eb85ae7c57ab8ac279e7fdaa9f04 Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 28 Jun 2011 10:19:05 -0400 Subject: ext4: quiet 'unused variables' compile warnings Unused variables was deleted. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index f331e50..31ae5fb 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3073,12 +3073,10 @@ static int ext4_convert_unwritten_extents_endio(handle_t *handle, struct ext4_ext_path *path) { struct ext4_extent *ex; - struct ext4_extent_header *eh; int depth; int err = 0; depth = ext_depth(inode); - eh = path[depth].p_hdr; ex = path[depth].p_ext; ext_debug("ext4_convert_unwritten_extents_endio: inode %lu, logical" diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 6ed859d..389386b 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4666,12 +4666,10 @@ void ext4_add_groupblocks(handle_t *handle, struct super_block *sb, struct ext4_buddy e4b; int err = 0, ret, blk_free_count; ext4_grpblk_t blocks_freed; - struct ext4_group_info *grp; ext4_debug("Adding block(s) %llu-%llu\n", block, block + count - 1); ext4_get_group_no_and_offset(sb, block, &block_group, &bit); - grp = ext4_get_group_info(sb, block_group); /* * Check to see if we are freeing blocks across a group * boundary. -- cgit v0.10.2 From 275d3ba6b40d0f098693b9089c6fee9bd4e55d74 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 29 Jun 2011 21:44:45 -0400 Subject: ext4: remove loop around bio_alloc() These days, bio_alloc() is guaranteed to never fail (as long as nvecs is less than BIO_MAX_PAGES), so we don't need the loop around the struct bio allocation. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c index 7bb8f76..430c401 100644 --- a/fs/ext4/page-io.c +++ b/fs/ext4/page-io.c @@ -285,11 +285,7 @@ static int io_submit_init(struct ext4_io_submit *io, io_end = ext4_init_io_end(inode, GFP_NOFS); if (!io_end) return -ENOMEM; - do { - bio = bio_alloc(GFP_NOIO, nvecs); - nvecs >>= 1; - } while (bio == NULL); - + bio = bio_alloc(GFP_NOIO, min(nvecs, BIO_MAX_PAGES)); bio->bi_sector = bh->b_blocknr * (bh->b_size >> 9); bio->bi_bdev = bh->b_bdev; bio->bi_private = io->io_end = io_end; -- cgit v0.10.2 From 24e6289c029b0cf5b4f75e12c1b66000d441c9ed Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 May 2011 11:51:18 +0300 Subject: OMAP: DSS2: remove extra includes from include/video/omapdss.h omapdss.h included platform_device.h and atomic.h, neither of which is needed by omapdss.h. Remove those includes from omapdss.h, and fix the affected .c files which did not include platform_device.h even though they should. Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 7a9a2e7..a9eebd8 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index d9489d5..d0b3f81 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -28,6 +28,7 @@ #include #include #include +#include #include