From 79d54b249c176ba4abb9a580951400246dd974b1 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 18:03:59 +0200 Subject: uprobes: Do not leak UTASK_BP_HIT if find_active_uprobe() fails If handle_swbp()->find_active_uprobe() fails we return with utask->state = UTASK_BP_HIT. Change handle_swbp() to reset utask->state at the start. Note that we do this unconditionally, see the next patch(es). Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 912ef48..2c1ff05 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1468,6 +1468,10 @@ static void handle_swbp(struct pt_regs *regs) bp_vaddr = uprobe_get_swbp_addr(regs); uprobe = find_active_uprobe(bp_vaddr, &is_swbp); + utask = current->utask; + if (utask) + utask->state = UTASK_RUNNING; + if (!uprobe) { if (is_swbp > 0) { /* No matching uprobe; signal SIGTRAP. */ @@ -1486,7 +1490,6 @@ static void handle_swbp(struct pt_regs *regs) return; } - utask = current->utask; if (!utask) { utask = add_utask(); /* Cannot allocate; re-execute the instruction. */ -- cgit v0.10.2 From 746a9e6ba24af2ccf03279c99d435a1b88ca5d17 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 18:23:51 +0200 Subject: uprobes: Do not setup ->active_uprobe/state prematurely handle_swbp() sets utask->active_uprobe before handler_chain(), and UTASK_SSTEP before pre_ssout(). This complicates the code for no reason, arch_ hooks or consumer->handler() should not (and can't) use this info. Change handle_swbp() to initialize them after pre_ssout(), and remove the no longer needed cleanup-utask code. Signed-off-by: Oleg Nesterov cked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 2c1ff05..41f048c 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1496,22 +1496,19 @@ static void handle_swbp(struct pt_regs *regs) if (!utask) goto cleanup_ret; } - utask->active_uprobe = uprobe; + handler_chain(uprobe, regs); if (uprobe->flags & UPROBE_SKIP_SSTEP && can_skip_sstep(uprobe, regs)) goto cleanup_ret; - utask->state = UTASK_SSTEP; if (!pre_ssout(uprobe, regs, bp_vaddr)) { arch_uprobe_enable_step(&uprobe->arch); + utask->active_uprobe = uprobe; + utask->state = UTASK_SSTEP; return; } cleanup_ret: - if (utask) { - utask->active_uprobe = NULL; - utask->state = UTASK_RUNNING; - } if (!(uprobe->flags & UPROBE_SKIP_SSTEP)) /* -- cgit v0.10.2 From 0578a97098dab967ece4b025fe5eb4984c4c86c0 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 18:31:23 +0200 Subject: uprobes: Fix UPROBE_SKIP_SSTEP checks in handle_swbp() If handle_swbp()->add_utask() fails but UPROBE_SKIP_SSTEP is set, cleanup_ret: path do not restart the insn, this is wrong. Remove this check and add the additional label for can_skip_sstep() = T case. Note also that UPROBE_SKIP_SSTEP can be false positive, we simply can not trust it unless arch_uprobe_skip_sstep() was already called. Also, move another UPROBE_SKIP_SSTEP check before can_skip_sstep() into this helper, this looks more clean and understandable. Note: probably we should rename "skip" to "emulate" and I think that "clear UPROBE_SKIP_SSTEP" should be moved to arch_can_skip. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 41f048c..d239296 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1389,10 +1389,11 @@ bool uprobe_deny_signal(void) */ static bool can_skip_sstep(struct uprobe *uprobe, struct pt_regs *regs) { - if (arch_uprobe_skip_sstep(&uprobe->arch, regs)) - return true; - - uprobe->flags &= ~UPROBE_SKIP_SSTEP; + if (uprobe->flags & UPROBE_SKIP_SSTEP) { + if (arch_uprobe_skip_sstep(&uprobe->arch, regs)) + return true; + uprobe->flags &= ~UPROBE_SKIP_SSTEP; + } return false; } @@ -1494,12 +1495,12 @@ static void handle_swbp(struct pt_regs *regs) utask = add_utask(); /* Cannot allocate; re-execute the instruction. */ if (!utask) - goto cleanup_ret; + goto restart; } handler_chain(uprobe, regs); - if (uprobe->flags & UPROBE_SKIP_SSTEP && can_skip_sstep(uprobe, regs)) - goto cleanup_ret; + if (can_skip_sstep(uprobe, regs)) + goto out; if (!pre_ssout(uprobe, regs, bp_vaddr)) { arch_uprobe_enable_step(&uprobe->arch); @@ -1508,15 +1509,13 @@ static void handle_swbp(struct pt_regs *regs) return; } -cleanup_ret: - if (!(uprobe->flags & UPROBE_SKIP_SSTEP)) - - /* - * cannot singlestep; cannot skip instruction; - * re-execute the instruction. - */ - instruction_pointer_set(regs, bp_vaddr); - +restart: + /* + * cannot singlestep; cannot skip instruction; + * re-execute the instruction. + */ + instruction_pointer_set(regs, bp_vaddr); +out: put_uprobe(uprobe); } -- cgit v0.10.2 From 1b08e907211cdc744f54871736005d9f3e7f182c Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 18:52:10 +0200 Subject: uprobes: Kill UTASK_BP_HIT state Kill UTASK_BP_HIT state, it buys nothing but complicates the code. It is only used in uprobe_notify_resume() to decide who should be called, we can check utask->active_uprobe != NULL instead. And this allows us to simplify handle_swbp(), no need to clear utask->state. Likewise we could kill UTASK_SSTEP, but UTASK_BP_HIT is worse and imho should die. The problem is, it creates the special case when task->utask is NULL, we can't distinguish RUNNING and BP_HIT. With this patch utask == NULL always means RUNNING. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index e6f0331..18d839d 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -59,7 +59,6 @@ struct uprobe_consumer { #ifdef CONFIG_UPROBES enum uprobe_task_state { UTASK_RUNNING, - UTASK_BP_HIT, UTASK_SSTEP, UTASK_SSTEP_ACK, UTASK_SSTEP_TRAPPED, diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index d239296..d3f5381 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1469,10 +1469,6 @@ static void handle_swbp(struct pt_regs *regs) bp_vaddr = uprobe_get_swbp_addr(regs); uprobe = find_active_uprobe(bp_vaddr, &is_swbp); - utask = current->utask; - if (utask) - utask->state = UTASK_RUNNING; - if (!uprobe) { if (is_swbp > 0) { /* No matching uprobe; signal SIGTRAP. */ @@ -1491,6 +1487,7 @@ static void handle_swbp(struct pt_regs *regs) return; } + utask = current->utask; if (!utask) { utask = add_utask(); /* Cannot allocate; re-execute the instruction. */ @@ -1547,13 +1544,12 @@ static void handle_singlestep(struct uprobe_task *utask, struct pt_regs *regs) } /* - * On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag. (and on - * subsequent probe hits on the thread sets the state to UTASK_BP_HIT) and - * allows the thread to return from interrupt. + * On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag and + * allows the thread to return from interrupt. After that handle_swbp() + * sets utask->active_uprobe. * - * On singlestep exception, singlestep notifier sets the TIF_UPROBE flag and - * also sets the state to UTASK_SSTEP_ACK and allows the thread to return from - * interrupt. + * On singlestep exception, singlestep notifier sets the TIF_UPROBE flag + * and allows the thread to return from interrupt. * * While returning to userspace, thread notices the TIF_UPROBE flag and calls * uprobe_notify_resume(). @@ -1563,10 +1559,10 @@ void uprobe_notify_resume(struct pt_regs *regs) struct uprobe_task *utask; utask = current->utask; - if (!utask || utask->state == UTASK_BP_HIT) - handle_swbp(regs); - else + if (utask && utask->active_uprobe) handle_singlestep(utask, regs); + else + handle_swbp(regs); } /* @@ -1575,17 +1571,10 @@ void uprobe_notify_resume(struct pt_regs *regs) */ int uprobe_pre_sstep_notifier(struct pt_regs *regs) { - struct uprobe_task *utask; - if (!current->mm || !test_bit(MMF_HAS_UPROBES, ¤t->mm->flags)) return 0; - utask = current->utask; - if (utask) - utask->state = UTASK_BP_HIT; - set_thread_flag(TIF_UPROBE); - return 1; } -- cgit v0.10.2 From db023ea595015058270be6a62fe60a7b6b5c50d7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 14 Sep 2012 19:05:46 +0200 Subject: uprobes: Move clear_thread_flag(TIF_UPROBE) to uprobe_notify_resume() Move clear_thread_flag(TIF_UPROBE) from do_notify_resume() to uprobe_notify_resume() for !CONFIG_UPROBES case. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index b280908..0041e5a 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -785,10 +785,8 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) mce_notify_process(); #endif /* CONFIG_X86_64 && CONFIG_X86_MCE */ - if (thread_info_flags & _TIF_UPROBE) { - clear_thread_flag(TIF_UPROBE); + if (thread_info_flags & _TIF_UPROBE) uprobe_notify_resume(regs); - } /* deal with pending signal delivery */ if (thread_info_flags & _TIF_SIGPENDING) diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index d3f5381..198d732 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -1558,6 +1558,8 @@ void uprobe_notify_resume(struct pt_regs *regs) { struct uprobe_task *utask; + clear_thread_flag(TIF_UPROBE); + utask = current->utask; if (utask && utask->active_uprobe) handle_singlestep(utask, regs); -- cgit v0.10.2 From 75ed82ea53bd0d2d8083261123576250f7ba851e Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 16 Sep 2012 17:20:06 +0200 Subject: uprobes: Change write_opcode() to use FOLL_FORCE write_opcode()->get_user_pages() needs FOLL_FORCE to ensure we can read the page even if the probed task did mprotect(PROT_NONE) after uprobe_register(). Without FOLL_WRITE, FOLL_FORCE doesn't have any side effect but allows to read the !VM_READ memory. Otherwiese the subsequent uprobe_unregister()->set_orig_insn() fails and we leak "int3". If that task does mprotect(PROT_READ | EXEC) and execute the probed insn later it will be killed. Note: in fact this is also needed for _register, see the next patch. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 198d732..80e8c7b 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -221,7 +221,7 @@ static int write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm, retry: /* Read the page with vaddr into memory */ - ret = get_user_pages(NULL, mm, vaddr, 1, 0, 0, &old_page, &vma); + ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &old_page, &vma); if (ret <= 0) return ret; -- cgit v0.10.2 From 78a320542e6cdb2800cd736b2d136e4261d34f43 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 16 Sep 2012 19:07:41 +0200 Subject: uprobes: Change valid_vma() to demand VM_MAYEXEC rather than VM_EXEC uprobe_register() or uprobe_mmap() requires VM_READ | VM_EXEC, this is not right. An apllication can do mprotect(PROT_EXEC) later and execute this code. Change valid_vma(is_register => true) to check VM_MAYEXEC instead. No need to check VM_MAYREAD, it is always set. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 80e8c7b..a9de408 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -106,8 +106,8 @@ static bool valid_vma(struct vm_area_struct *vma, bool is_register) if (!is_register) return true; - if ((vma->vm_flags & (VM_HUGETLB|VM_READ|VM_WRITE|VM_EXEC|VM_SHARED)) - == (VM_READ|VM_EXEC)) + if ((vma->vm_flags & (VM_HUGETLB | VM_WRITE | VM_MAYEXEC | VM_SHARED)) + == VM_MAYEXEC) return true; return false; -- cgit v0.10.2 From e40cfce626a5537994058ee9a940dcfdc0f68ef0 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 16 Sep 2012 19:31:39 +0200 Subject: uprobes: Restrict valid_vma(false) to skip VM_SHARED vmas valid_vma(false) ignores ->vm_flags, this is not actually right. We should never try to write into MAP_SHARED mapping, this can confuse an apllication which actually writes to ->vm_file. With this patch valid_vma(false) ignores VM_WRITE only but checks other (immutable) bits checked by valid_vma(true). This can also speedup uprobe_munmap() and uprobe_unregister(). Note: even after this patch _unregister can confuse the probed application if it does mprotect(PROT_WRITE) after _register and installs "int3", but this is hardly possible to avoid and this doesn't differ from gdb case. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index a9de408..8d182bd 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -100,17 +100,12 @@ struct uprobe { */ static bool valid_vma(struct vm_area_struct *vma, bool is_register) { - if (!vma->vm_file) - return false; - - if (!is_register) - return true; + vm_flags_t flags = VM_HUGETLB | VM_MAYEXEC | VM_SHARED; - if ((vma->vm_flags & (VM_HUGETLB | VM_WRITE | VM_MAYEXEC | VM_SHARED)) - == VM_MAYEXEC) - return true; + if (is_register) + flags |= VM_WRITE; - return false; + return vma->vm_file && (vma->vm_flags & flags) == VM_MAYEXEC; } static unsigned long offset_to_vaddr(struct vm_area_struct *vma, loff_t offset) -- cgit v0.10.2 From e97f65a17deafacc360a4cb75ae944897ecea6d7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 19 Sep 2012 16:36:01 +0200 Subject: uprobes: Kill set_swbp()->is_swbp_at_addr() A separate patch for better documentation. set_swbp()->is_swbp_at_addr() is not needed for correctness, it is harmless to do the unnecessary __replace_page(old_page, new_page) when these 2 pages are identical. And it can not be counted as optimization. mmap/register races are very unlikely, while in the likely case is_swbp_at_addr() adds the extra get_user_pages() even if the caller is uprobe_mmap(current->mm) and returns false. Note also that the semantics/usage of is_swbp_at_addr() in uprobe.c is confusing. set_swbp() uses it to detect the case when this insn was already modified by uprobes, that is why it should always compare the opcode with UPROBE_SWBP_INSN even if the hardware (like powerpc) has other trap insns. It doesn't matter if this breakpoint was in fact installed by gdb or application itself, we are going to "steal" this breakpoint anyway and execute the original insn from vm_file even if it no longer matches the memory. OTOH, handle_swbp()->find_active_uprobe() uses is_swbp_at_addr() to figure out whether we need to send SIGTRAP or not if we can not find uprobe, so in this case it should return true for all trap variants, not only for UPROBE_SWBP_INSN. This patch removes set_swbp()->is_swbp_at_addr(), the next patches will remove it from set_orig_insn() which is similar to set_swbp() in this respect. So the only caller will be handle_swbp() and we can make its semantics clear. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 8d182bd..a4453d1 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -321,17 +321,6 @@ out: */ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr) { - int result; - /* - * See the comment near uprobes_hash(). - */ - result = is_swbp_at_addr(mm, vaddr); - if (result == 1) - return 0; - - if (result) - return result; - return write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN); } -- cgit v0.10.2 From cceb55aab73d2aea8f4d6f7414d2e1b647a3dacb Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 23 Sep 2012 21:10:18 +0200 Subject: uprobes: Introduce copy_opcode(), kill read_opcode() No functional changes, preparations. 1. Extract the kmap-and-memcpy code from read_opcode() into the new trivial helper, copy_opcode(). The next patch will add another user. 2. read_opcode() becomes really trivial, fold it into its single caller, is_swbp_at_addr(). 3. Remove "auprobe" argument from write_opcode(), it is not used since f403072c6. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index a4453d1..b6f0f71 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -183,19 +183,25 @@ bool __weak is_swbp_insn(uprobe_opcode_t *insn) return *insn == UPROBE_SWBP_INSN; } +static void copy_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *opcode) +{ + void *kaddr = kmap_atomic(page); + memcpy(opcode, kaddr + (vaddr & ~PAGE_MASK), UPROBE_SWBP_INSN_SIZE); + kunmap_atomic(kaddr); +} + /* * NOTE: * Expect the breakpoint instruction to be the smallest size instruction for * the architecture. If an arch has variable length instruction and the * breakpoint instruction is not of the smallest length instruction - * supported by that architecture then we need to modify read_opcode / + * supported by that architecture then we need to modify is_swbp_at_addr and * write_opcode accordingly. This would never be a problem for archs that * have fixed length instructions. */ /* * write_opcode - write the opcode at a given virtual address. - * @auprobe: arch breakpointing information. * @mm: the probed process address space. * @vaddr: the virtual address to store the opcode. * @opcode: opcode to be written at @vaddr. @@ -206,8 +212,8 @@ bool __weak is_swbp_insn(uprobe_opcode_t *insn) * For mm @mm, write the opcode at @vaddr. * Return 0 (success) or a negative errno. */ -static int write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm, - unsigned long vaddr, uprobe_opcode_t opcode) +static int write_opcode(struct mm_struct *mm, unsigned long vaddr, + uprobe_opcode_t opcode) { struct page *old_page, *new_page; void *vaddr_old, *vaddr_new; @@ -253,40 +259,9 @@ put_old: return ret; } -/** - * read_opcode - read the opcode at a given virtual address. - * @mm: the probed process address space. - * @vaddr: the virtual address to read the opcode. - * @opcode: location to store the read opcode. - * - * Called with mm->mmap_sem held (for read and with a reference to - * mm. - * - * For mm @mm, read the opcode at @vaddr and store it in @opcode. - * Return 0 (success) or a negative errno. - */ -static int read_opcode(struct mm_struct *mm, unsigned long vaddr, uprobe_opcode_t *opcode) -{ - struct page *page; - void *vaddr_new; - int ret; - - ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL); - if (ret <= 0) - return ret; - - vaddr_new = kmap_atomic(page); - vaddr &= ~PAGE_MASK; - memcpy(opcode, vaddr_new + vaddr, UPROBE_SWBP_INSN_SIZE); - kunmap_atomic(vaddr_new); - - put_page(page); - - return 0; -} - static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr) { + struct page *page; uprobe_opcode_t opcode; int result; @@ -300,14 +275,14 @@ static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr) goto out; } - result = read_opcode(mm, vaddr, &opcode); - if (result) + result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL); + if (result < 0) return result; -out: - if (is_swbp_insn(&opcode)) - return 1; - return 0; + copy_opcode(page, vaddr, &opcode); + put_page(page); + out: + return is_swbp_insn(&opcode); } /** @@ -321,7 +296,7 @@ out: */ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr) { - return write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN); + return write_opcode(mm, vaddr, UPROBE_SWBP_INSN); } /** @@ -345,7 +320,7 @@ set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long v if (result != 1) return result; - return write_opcode(auprobe, mm, vaddr, *(uprobe_opcode_t *)auprobe->insn); + return write_opcode(mm, vaddr, *(uprobe_opcode_t *)auprobe->insn); } static int match_uprobe(struct uprobe *l, struct uprobe *r) -- cgit v0.10.2 From ed6f6a50dc5f183c53e7b3b7fed4794bc50d9aa7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 23 Sep 2012 21:30:44 +0200 Subject: uprobes: Kill set_orig_insn()->is_swbp_at_addr() Unlike set_swbp(), set_orig_insn()->is_swbp_at_addr() makes sense, although it can't prevent all confusions. But the usage of is_swbp_at_addr() is equally confusing, and it adds the extra get_user_pages() we can avoid. This patch removes set_orig_insn()->is_swbp_at_addr() but changes write_opcode() to do the necessary checks before replace_page(). Perhaps it also makes sense to ensure PAGE_MAPPING_ANON in unregister case. find_active_uprobe() becomes the only user of is_swbp_at_addr(), we can change its semantics. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index b6f0f71..9248ee7 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -190,6 +190,25 @@ static void copy_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t kunmap_atomic(kaddr); } +static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *new_opcode) +{ + uprobe_opcode_t old_opcode; + bool is_swbp; + + copy_opcode(page, vaddr, &old_opcode); + is_swbp = is_swbp_insn(&old_opcode); + + if (is_swbp_insn(new_opcode)) { + if (is_swbp) /* register: already installed? */ + return 0; + } else { + if (!is_swbp) /* unregister: was it changed by us? */ + return -EINVAL; + } + + return 1; +} + /* * NOTE: * Expect the breakpoint instruction to be the smallest size instruction for @@ -226,6 +245,10 @@ retry: if (ret <= 0) return ret; + ret = verify_opcode(old_page, vaddr, &opcode); + if (ret <= 0) + goto put_old; + ret = -ENOMEM; new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, vaddr); if (!new_page) @@ -311,15 +334,6 @@ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned int __weak set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr) { - int result; - - result = is_swbp_at_addr(mm, vaddr); - if (!result) - return -EINVAL; - - if (result != 1) - return result; - return write_opcode(mm, vaddr, *(uprobe_opcode_t *)auprobe->insn); } -- cgit v0.10.2 From ec75fba93ef0c00c91545b5e53841a80cffad0c4 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 23 Sep 2012 21:55:19 +0200 Subject: uprobes: Simplify is_swbp_at_addr(), remove stale comments After the previous change is_swbp_at_addr() is always called with current->mm. Remove this check and move it close to its single caller. Also, remove the obsolete comment about is_swbp_at_addr() and uprobe_state.count. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 9248ee7..6136854 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -282,32 +282,6 @@ put_old: return ret; } -static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr) -{ - struct page *page; - uprobe_opcode_t opcode; - int result; - - if (current->mm == mm) { - pagefault_disable(); - result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr, - sizeof(opcode)); - pagefault_enable(); - - if (likely(result == 0)) - goto out; - } - - result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL); - if (result < 0) - return result; - - copy_opcode(page, vaddr, &opcode); - put_page(page); - out: - return is_swbp_insn(&opcode); -} - /** * set_swbp - store breakpoint at a given address. * @auprobe: arch specific probepoint information. @@ -589,29 +563,6 @@ static int copy_insn(struct uprobe *uprobe, struct file *filp) return __copy_insn(mapping, filp, uprobe->arch.insn, bytes, uprobe->offset); } -/* - * How mm->uprobes_state.count gets updated - * uprobe_mmap() increments the count if - * - it successfully adds a breakpoint. - * - it cannot add a breakpoint, but sees that there is a underlying - * breakpoint (via a is_swbp_at_addr()). - * - * uprobe_munmap() decrements the count if - * - it sees a underlying breakpoint, (via is_swbp_at_addr) - * (Subsequent uprobe_unregister wouldnt find the breakpoint - * unless a uprobe_mmap kicks in, since the old vma would be - * dropped just after uprobe_munmap.) - * - * uprobe_register increments the count if: - * - it successfully adds a breakpoint. - * - * uprobe_unregister decrements the count if: - * - it sees a underlying breakpoint and removes successfully. - * (via is_swbp_at_addr) - * (Subsequent uprobe_munmap wouldnt find the breakpoint - * since there is no underlying breakpoint after the - * breakpoint removal.) - */ static int install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, struct vm_area_struct *vma, unsigned long vaddr) @@ -1389,6 +1340,30 @@ static void mmf_recalc_uprobes(struct mm_struct *mm) clear_bit(MMF_HAS_UPROBES, &mm->flags); } +static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr) +{ + struct page *page; + uprobe_opcode_t opcode; + int result; + + pagefault_disable(); + result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr, + sizeof(opcode)); + pagefault_enable(); + + if (likely(result == 0)) + goto out; + + result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL); + if (result < 0) + return result; + + copy_opcode(page, vaddr, &opcode); + put_page(page); + out: + return is_swbp_insn(&opcode); +} + static struct uprobe *find_active_uprobe(unsigned long bp_vaddr, int *is_swbp) { struct mm_struct *mm = current->mm; -- cgit v0.10.2 From 33766368f6532313571534f9112b1796d6651bbe Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 30 Sep 2012 19:47:40 +0300 Subject: mac80211: Fix FC masking in BIP AAD generation The bits used in the mask were off-by-one and ended up masking PwrMgt, MoreData, Protected fields instead of Retry, PwrMgt, MoreData. Fix this and to mask the correct fields. While doing so, convert the code to mask the full FC using IEEE80211_FCTL_* defines similarly to how CCMP AAD is built. Since BIP is used only with broadcast/multicast management frames, the Retry field is always 0 in these frames. The Protected field is also zero to maintain backwards compatibility. As such, the incorrect mask here does not really cause any problems for valid frames. In theory, an invalid BIP frame with Retry or Protected field set to 1 could be rejected because of BIP validation. However, no such frame should show up with standard compliant implementations, so this does not cause problems in normal BIP use. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index bdb53ab..e58bf3f 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -545,14 +545,19 @@ ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx) static void bip_aad(struct sk_buff *skb, u8 *aad) { + __le16 mask_fc; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + /* BIP AAD: FC(masked) || A1 || A2 || A3 */ /* FC type/subtype */ - aad[0] = skb->data[0]; /* Mask FC Retry, PwrMgt, MoreData flags to zero */ - aad[1] = skb->data[1] & ~(BIT(4) | BIT(5) | BIT(6)); + mask_fc = hdr->frame_control; + mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY | IEEE80211_FCTL_PM | + IEEE80211_FCTL_MOREDATA); + put_unaligned(mask_fc, (__le16 *) &aad[0]); /* A1 || A2 || A3 */ - memcpy(aad + 2, skb->data + 4, 3 * ETH_ALEN); + memcpy(aad + 2, &hdr->addr1, 3 * ETH_ALEN); } -- cgit v0.10.2 From 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 1 Oct 2012 14:34:42 -0700 Subject: x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID The patch: 73201dbe x86, suspend: On wakeup always initialize cr4 and EFER ... was incorrectly committed in an intermediate (unfinished) form. - We need to test CF, not ZF, for a bit test with btl. - We don't actually need to compute the existence of EFLAGS.ID, since we set a flag at suspend time if CR4 should be restored. Signed-off-by: H. Peter Anvin Cc: Rafael J. Wysocki Link: http://lkml.kernel.org/r/1348529239-17943-1-git-send-email-hpa@linux.intel.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/realmode/rm/wakeup_asm.S b/arch/x86/realmode/rm/wakeup_asm.S index e56479e..9e7e147 100644 --- a/arch/x86/realmode/rm/wakeup_asm.S +++ b/arch/x86/realmode/rm/wakeup_asm.S @@ -74,18 +74,9 @@ ENTRY(wakeup_start) lidtl wakeup_idt - /* Clear the EFLAGS but remember if we have EFLAGS.ID */ - movl $X86_EFLAGS_ID, %ecx - pushl %ecx - popfl - pushfl - popl %edi + /* Clear the EFLAGS */ pushl $0 popfl - pushfl - popl %edx - xorl %edx, %edi - andl %ecx, %edi /* %edi is zero iff CPUID & %cr4 are missing */ /* Check header signature... */ movl signature, %eax @@ -120,12 +111,12 @@ ENTRY(wakeup_start) movl %eax, %cr3 btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi - jz 1f + jnc 1f movl pmode_cr4, %eax movl %eax, %cr4 1: btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi - jz 1f + jnc 1f movl pmode_efer, %eax movl pmode_efer + 4, %edx movl $MSR_EFER, %ecx -- cgit v0.10.2 From fcd8af585f587741c051f7124b8dee6c73c8629b Mon Sep 17 00:00:00 2001 From: David Hooper Date: Tue, 2 Oct 2012 15:26:53 +0100 Subject: x86/reboot: Remove quirk entry for SBC FITPC Remove the quirk for the SBC FITPC. It seems ot have been required when the default was kbd reboot, but no longer required now that the default is acpi reboot. Furthermore, BIOS reboot no longer works for this board as of 2.6.39 or any of the 3.x kernels. Signed-off-by: David Hooper Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20121002142635.17403.59959.stgit@localhost.localdomain Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 52190a9..4e8ba39 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -358,14 +358,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), }, }, - { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */ - .callback = set_bios_reboot, - .ident = "CompuLab SBC-FITPC2", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"), - DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), - }, - }, { /* Handle problems with rebooting on ASUS P4S800 */ .callback = set_bios_reboot, .ident = "ASUS P4S800", -- cgit v0.10.2 From 961c79761dda351b5fb263a0654b98daac130b7a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 2 Oct 2012 11:34:09 +0300 Subject: x86/cache_info: Use ARRAY_SIZE() in amd_l3_attrs() Using ARRAY_SIZE() is more readable. Signed-off-by: Dan Carpenter Reviewed-by: Srivatsa S. Bhat Cc: Shai Fultheim Cc: Greg Kroah-Hartman Cc: Andreas Herrmann Link: http://lkml.kernel.org/r/20121002083409.GM12398@elgon.mountain Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 9a7c90d..93c5451 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -991,7 +991,7 @@ static struct attribute ** __cpuinit amd_l3_attrs(void) if (attrs) return attrs; - n = sizeof (default_attrs) / sizeof (struct attribute *); + n = ARRAY_SIZE(default_attrs); if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) n += 2; -- cgit v0.10.2 From 07ac2296fb24e40ba8271a08167b588f4bbbe90c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 4 Oct 2012 14:15:02 +0300 Subject: ASoC: twl6040: Fix Stream DAPM mapping Fixes commit: 805238b ASoC: twl6040: Convert to use DAI DAPM widgets where the connection between the stream widgets and the ADC widgets was reversed and because of this on capture the DAPM is not powering up the codec. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index e8f97af..00b85cc 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -820,10 +820,10 @@ static const struct snd_soc_dapm_route intercon[] = { {"VIBRA DAC", NULL, "Vibra Playback"}, /* ADC -> Stream mapping */ - {"ADC Left", NULL, "Legacy Capture"}, - {"ADC Left", NULL, "Capture"}, - {"ADC Right", NULL, "Legacy Capture"}, - {"ADC Right", NULL, "Capture"}, + {"Legacy Capture" , NULL, "ADC Left"}, + {"Capture", NULL, "ADC Left"}, + {"Legacy Capture", NULL, "ADC Right"}, + {"Capture" , NULL, "ADC Right"}, /* Capture path */ {"Analog Left Capture Route", "Headset Mic", "HSMIC"}, -- cgit v0.10.2 From 034940a6b3afbe79022ab6922dd9d2982b78e6d5 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 2 Oct 2012 15:31:16 +0300 Subject: ASoC: omap-abe-twl6040: Fix typo of Vibrator It is not Vinrator but Vibrator. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c index be525df..750d595 100644 --- a/sound/soc/omap/omap-abe-twl6040.c +++ b/sound/soc/omap/omap-abe-twl6040.c @@ -220,7 +220,7 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd) twl6040_disconnect_pin(dapm, pdata->has_hf, "Ext Spk"); twl6040_disconnect_pin(dapm, pdata->has_ep, "Earphone Spk"); twl6040_disconnect_pin(dapm, pdata->has_aux, "Line Out"); - twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vinrator"); + twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vibrator"); twl6040_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic"); twl6040_disconnect_pin(dapm, pdata->has_mainmic, "Main Handset Mic"); twl6040_disconnect_pin(dapm, pdata->has_submic, "Sub Handset Mic"); -- cgit v0.10.2 From 07b706dc9e92f030cfca330879aa8b7ecbb7b79a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 4 Oct 2012 11:27:15 +0300 Subject: ASoC: Fix wrong include for McPDM McPDM needs platt/cpu.h for omap_rev and not omap_hwmod.h. Drivers must not include omap_hwmod.h at, it will be private to mach-omap2 soon. Fix the problem before other drivers will also start including omap_hwmod.h. Note that also plat/cpu.h will be going away, so the omap_rev check needs to be replaced with mcpdm-watchdog flag from platform_data or DT. Signed-off-by: Tony Lindgren Signed-off-by: Mark Brown diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c index 7755650..fdf655e 100644 --- a/sound/soc/omap/omap-mcpdm.c +++ b/sound/soc/omap/omap-mcpdm.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include "omap-mcpdm.h" #include "omap-pcm.h" -- cgit v0.10.2 From 68214d998a2e3102854cf10ebe505243035702fc Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 4 Oct 2012 11:27:16 +0300 Subject: ASoC: omap-mcpdm: Remove OMAP revision check The OMAP revision check is not needed since the watchdog bit is not in use on 4430 ES1.0 and have no effect when we set the bit. The watchdog need to be enabled on all other revisions. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c index fdf655e..e134b27 100644 --- a/sound/soc/omap/omap-mcpdm.c +++ b/sound/soc/omap/omap-mcpdm.c @@ -40,7 +40,6 @@ #include #include -#include #include "omap-mcpdm.h" #include "omap-pcm.h" @@ -258,13 +257,9 @@ static int omap_mcpdm_dai_startup(struct snd_pcm_substream *substream, mutex_lock(&mcpdm->mutex); if (!dai->active) { - /* Enable watch dog for ES above ES 1.0 to avoid saturation */ - if (omap_rev() != OMAP4430_REV_ES1_0) { - u32 ctrl = omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL); + u32 ctrl = omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL); - omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, - ctrl | MCPDM_WD_EN); - } + omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, ctrl | MCPDM_WD_EN); omap_mcpdm_open_streams(mcpdm); } mutex_unlock(&mcpdm->mutex); -- cgit v0.10.2 From b764de2d8bafff3a52aa6ee66cedf435486974f4 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 3 Oct 2012 12:46:57 +0200 Subject: ASoC: ams-delta: Convert to use snd_soc_register_card() The old method of registering with the ASoC core by creating a "soc-audio" platform device no longer works for Amstrad Delta sound card after recent changes to drvdata handling (commit 0998d0631001288a5974afc0b2a5f568bcdecb4d, 'device-core: Ensure drvdata = NULL when no driver is bound'. Use snd_soc_register_card() method instead, as suggested by the ASoC core generated warning message, and move both the card and codec platform device registration to the arch board file where those belong. Created and tested against linux-3.6-rc5. Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Mark Brown diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c534698..5ab9c6b 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -444,16 +444,28 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ }; +static struct platform_device ams_delta_audio_device = { + .name = "ams-delta-audio", + .id = -1, +}; + +static struct platform_device cx20442_codec_device = { + .name = "cx20442-codec", + .id = -1, +}; + static struct platform_device *ams_delta_devices[] __initdata = { &latch1_gpio_device, &latch2_gpio_device, &ams_delta_kp_device, &ams_delta_camera_device, + &ams_delta_audio_device, }; static struct platform_device *late_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, + &cx20442_codec_device, }; static void __init ams_delta_init(void) diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c index 7d4fa8e..7b18b74 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/omap/ams-delta.c @@ -575,56 +575,53 @@ static struct snd_soc_card ams_delta_audio_card = { }; /* Module init/exit */ -static struct platform_device *ams_delta_audio_platform_device; -static struct platform_device *cx20442_platform_device; - -static int __init ams_delta_module_init(void) +static __devinit int ams_delta_probe(struct platform_device *pdev) { + struct snd_soc_card *card = &ams_delta_audio_card; int ret; - if (!(machine_is_ams_delta())) - return -ENODEV; - - ams_delta_audio_platform_device = - platform_device_alloc("soc-audio", -1); - if (!ams_delta_audio_platform_device) - return -ENOMEM; + card->dev = &pdev->dev; - platform_set_drvdata(ams_delta_audio_platform_device, - &ams_delta_audio_card); - - ret = platform_device_add(ams_delta_audio_platform_device); - if (ret) - goto err; - - /* - * Codec platform device could be registered from elsewhere (board?), - * but I do it here as it makes sense only if used with the card. - */ - cx20442_platform_device = - platform_device_register_simple("cx20442-codec", -1, NULL, 0); + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); + card->dev = NULL; + return ret; + } return 0; -err: - platform_device_put(ams_delta_audio_platform_device); - return ret; } -late_initcall(ams_delta_module_init); -static void __exit ams_delta_module_exit(void) +static int __devexit ams_delta_remove(struct platform_device *pdev) { + struct snd_soc_card *card = platform_get_drvdata(pdev); + if (tty_unregister_ldisc(N_V253) != 0) - dev_warn(&ams_delta_audio_platform_device->dev, + dev_warn(&pdev->dev, "failed to unregister V253 line discipline\n"); snd_soc_jack_free_gpios(&ams_delta_hook_switch, ARRAY_SIZE(ams_delta_hook_switch_gpios), ams_delta_hook_switch_gpios); - platform_device_unregister(cx20442_platform_device); - platform_device_unregister(ams_delta_audio_platform_device); + snd_soc_unregister_card(card); + card->dev = NULL; + return 0; } -module_exit(ams_delta_module_exit); + +#define DRV_NAME "ams-delta-audio" + +static struct platform_driver ams_delta_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = ams_delta_probe, + .remove = __devexit_p(ams_delta_remove), +}; + +module_platform_driver(ams_delta_driver); MODULE_AUTHOR("Janusz Krzysztofik "); MODULE_DESCRIPTION("ALSA SoC driver for Amstrad E3 (Delta) videophone"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v0.10.2 From eac77839f9707c4813344bef64e8b62d128236dd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 26 Sep 2012 16:22:32 +0100 Subject: ASoC: bells: Correct typo in sub speaker DAI name for WM5110 Signed-off-by: Mark Brown diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c index 5dc10df..a2ca156 100644 --- a/sound/soc/samsung/bells.c +++ b/sound/soc/samsung/bells.c @@ -247,7 +247,7 @@ static struct snd_soc_dai_link bells_dai_wm5110[] = { { .name = "Sub", .stream_name = "Sub", - .cpu_dai_name = "wm5102-aif3", + .cpu_dai_name = "wm5110-aif3", .codec_dai_name = "wm9081-hifi", .codec_name = "wm9081.1-006c", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -- cgit v0.10.2 From 5ae9eb4cbdfd640269dbd66aa3c92ea8e11cc838 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 2 Oct 2012 12:02:48 +0100 Subject: ASoC: wm2200: Use rev A register patches on rev B Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index efa93dbb..2008b7b 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -2091,6 +2091,7 @@ static __devinit int wm2200_i2c_probe(struct i2c_client *i2c, switch (wm2200->rev) { case 0: + case 1: ret = regmap_register_patch(wm2200->regmap, wm2200_reva_patch, ARRAY_SIZE(wm2200_reva_patch)); if (ret != 0) { -- cgit v0.10.2 From a1b98e12b7f8fad2f0aa3c08a3302bcac7ae1ec7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 2 Oct 2012 19:10:43 +0100 Subject: ASoC: wm2200: Fix non-inverted OUT2 mute control Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index 2008b7b..eab64a1 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -1028,7 +1028,7 @@ SOC_DOUBLE_R_TLV("OUT2 Digital Volume", WM2200_DAC_DIGITAL_VOLUME_2L, WM2200_DAC_DIGITAL_VOLUME_2R, WM2200_OUT2L_VOL_SHIFT, 0x9f, 0, digital_tlv), SOC_DOUBLE("OUT2 Switch", WM2200_PDM_1, WM2200_SPK1L_MUTE_SHIFT, - WM2200_SPK1R_MUTE_SHIFT, 1, 0), + WM2200_SPK1R_MUTE_SHIFT, 1, 1), }; WM2200_MIXER_ENUMS(OUT1L, WM2200_OUT1LMIX_INPUT_1_SOURCE); -- cgit v0.10.2 From 60d4616f3dc63371b3dc367e5e88fd4b4f037f65 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Fri, 5 Oct 2012 11:32:02 -0400 Subject: ext4: serialize fallocate with ext4_convert_unwritten_extents Fallocate should wait for pended ext4_convert_unwritten_extents() otherwise following race may happen: ftruncate( ,12288); fallocate( ,0, 4096) io_sibmit( ,0, 4096); /* Write to fallocated area, split extent if needed */ fallocate( ,0, 8192); /* Grow extent and broke assumption about extent */ Later kwork completion will do: ->ext4_convert_unwritten_extents (0, 4096) ->ext4_map_blocks(handle, inode, &map, EXT4_GET_BLOCKS_IO_CONVERT_EXT); ->ext4_ext_map_blocks() /* Will find new extent: ex = [0,2] !!!!!! */ ->ext4_ext_handle_uninitialized_extents() ->ext4_convert_unwritten_extents_endio() /* convert [0,2] extent to initialized, but only[0,1] was written */ Signed-off-by: Dmitry Monakhov Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 1c94cca..c278927 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -4428,6 +4428,9 @@ long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len) */ if (len <= EXT_UNINIT_MAX_LEN << blkbits) flags |= EXT4_GET_BLOCKS_NO_NORMALIZE; + + /* Prevent race condition between unwritten */ + ext4_flush_unwritten_io(inode); retry: while (ret >= 0 && ret < max_blocks) { map.m_lblk = map.m_lblk + ret; -- cgit v0.10.2 From 6f5601251d7e306b8a7bf5e674c5307d865c0fa1 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Thu, 4 Oct 2012 20:01:21 -0400 Subject: net, TTY: initialize tty->driver_data before usage Commit 9c650ffc ("TTY: ircomm_tty, add tty install") split _open() to _install() and _open(). It also moved the initialization of driver_data out of open(), but never added it to install() - causing a NULL ptr deref whenever the driver was used. Signed-off-by: Sasha Levin Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c index 95a3a7a..496ce2c 100644 --- a/net/irda/ircomm/ircomm_tty.c +++ b/net/irda/ircomm/ircomm_tty.c @@ -421,6 +421,8 @@ static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty) hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL); } + tty->driver_data = self; + return tty_port_install(&self->port, driver, tty); } -- cgit v0.10.2 From 2351a6c6e7d5a5e848411b5dd2c02142497624cc Mon Sep 17 00:00:00 2001 From: Markus Trippelsdorf Date: Fri, 5 Oct 2012 14:57:17 +0200 Subject: tty: Fix bogus "callbacks suppressed" messages On the current git tree one sees messages such as: tty_init_dev: 24 callbacks suppressed tty_init_dev: 3 callbacks suppressed To fix this we need to look at condition before calling __ratelimit in the WARN_RATELIMIT macro. While at it remove the superfluous __WARN_RATELIMIT macros. Original patch is from Joe Perches and Jiri Slaby. Signed-off-by: Markus Trippelsdorf Acked-and-tested-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index e11ccb4..0a260d8 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -46,20 +46,17 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define WARN_ON_RATELIMIT(condition, state) \ WARN_ON((condition) && __ratelimit(state)) -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = 0; \ - if (unlikely(__ratelimit(state))) \ - rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ +#define WARN_RATELIMIT(condition, format, ...) \ ({ \ static DEFINE_RATELIMIT_STATE(_rs, \ DEFAULT_RATELIMIT_INTERVAL, \ DEFAULT_RATELIMIT_BURST); \ - __WARN_RATELIMIT(condition, &_rs, format); \ + int rtn = !!(condition); \ + \ + if (unlikely(rtn && __ratelimit(&_rs))) \ + WARN(rtn, format, ##__VA_ARGS__); \ + \ + rtn; \ }) #else @@ -67,15 +64,9 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define WARN_ON_RATELIMIT(condition, state) \ WARN_ON(condition) -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ +#define WARN_RATELIMIT(condition, format, ...) \ ({ \ - int rtn = WARN(condition, format); \ + int rtn = WARN(condition, format, ##__VA_ARGS__); \ rtn; \ }) -- cgit v0.10.2 From 725dd00a99dd5fb94af55115bf7ade59624c8bc3 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sun, 30 Sep 2012 13:19:19 +0400 Subject: serial: sccnxp: Allows the driver to be compiled as a module Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 233fbaa..2a53be5 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1150,7 +1150,7 @@ config SERIAL_SC26XX_CONSOLE Support for Console on SC2681/SC2692 serial ports. config SERIAL_SCCNXP - bool "SCCNXP serial port support" + tristate "SCCNXP serial port support" depends on !SERIAL_SC26XX select SERIAL_CORE default n @@ -1162,7 +1162,7 @@ config SERIAL_SCCNXP config SERIAL_SCCNXP_CONSOLE bool "Console on SCCNXP serial port" - depends on SERIAL_SCCNXP + depends on SERIAL_SCCNXP=y select SERIAL_CORE_CONSOLE help Support for console on SCCNXP serial ports. -- cgit v0.10.2 From ee98581f624a6ce0f17706d7ff2a161aacfb977a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 27 Sep 2012 20:38:26 +0200 Subject: staging: serial: dgrp: Add missing #include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On m68k: drivers/staging/dgrp/dgrp_mon_ops.c: In function ‘dgrp_mon_read’: drivers/staging/dgrp/dgrp_mon_ops.c:304: error: implicit declaration of function ‘copy_to_user’ drivers/staging/dgrp/dgrp_specproc.c: In function ‘config_proc_write’: drivers/staging/dgrp/dgrp_specproc.c:470: error: implicit declaration of function ‘copy_from_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘drp_wmove’: drivers/staging/dgrp/dgrp_tty.c:1284: error: implicit declaration of function ‘copy_from_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘get_modem_info’: drivers/staging/dgrp/dgrp_tty.c:2267: error: implicit declaration of function ‘put_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘set_modem_info’: drivers/staging/dgrp/dgrp_tty.c:2283: error: implicit declaration of function ‘access_ok’ drivers/staging/dgrp/dgrp_tty.c:2283: error: ‘VERIFY_READ’ undeclared (first use in this function) drivers/staging/dgrp/dgrp_tty.c:2283: error: (Each undeclared identifier is reported only once drivers/staging/dgrp/dgrp_tty.c:2283: error: for each function it appears in.) drivers/staging/dgrp/dgrp_tty.c:2287: error: implicit declaration of function ‘get_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘dgrp_tty_digigetedelay’: drivers/staging/dgrp/dgrp_tty.c:2474: error: implicit declaration of function ‘copy_to_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘dgrp_tty_ioctl’: drivers/staging/dgrp/dgrp_tty.c:2618: error: ‘VERIFY_WRITE’ undeclared (first use in this function) Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/dgrp/dgrp_mon_ops.c b/drivers/staging/dgrp/dgrp_mon_ops.c index 268dcb9..4792d05 100644 --- a/drivers/staging/dgrp/dgrp_mon_ops.c +++ b/drivers/staging/dgrp/dgrp_mon_ops.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "dgrp_common.h" diff --git a/drivers/staging/dgrp/dgrp_specproc.c b/drivers/staging/dgrp/dgrp_specproc.c index 28f5c9a..a5840e7 100644 --- a/drivers/staging/dgrp/dgrp_specproc.c +++ b/drivers/staging/dgrp/dgrp_specproc.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "dgrp_common.h" diff --git a/drivers/staging/dgrp/dgrp_tty.c b/drivers/staging/dgrp/dgrp_tty.c index 7d7de87..72f6fcf 100644 --- a/drivers/staging/dgrp/dgrp_tty.c +++ b/drivers/staging/dgrp/dgrp_tty.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "dgrp_common.h" -- cgit v0.10.2 From b70936d9ffbf0f45f4fa13a03122f015f13ecdb0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 5 Oct 2012 09:34:37 -0700 Subject: tty: serial: sccnxp: Fix bug with unterminated platform_id list The build even tells you that this is a bad thing: drivers/tty/serial/sccnxp: struct platform_device_id is 32 bytes. The last of 8 is: 0x73 0x63 0x36 0x38 0x36 0x39 0x32 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x54 0x0c 0x01 0x00 0x00 0x00 0x00 0x00 FATAL: drivers/tty/serial/sccnxp: struct platform_device_id is not terminated with a NULL entry! So fix this problem up before someone oopses their box when loading the driver, as this breaks the build. Cc: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index b7086d0..e821068 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -971,6 +971,7 @@ static const struct platform_device_id sccnxp_id_table[] = { { "sc28202", SCCNXP_TYPE_SC28202 }, { "sc68681", SCCNXP_TYPE_SC68681 }, { "sc68692", SCCNXP_TYPE_SC68692 }, + { }, }; MODULE_DEVICE_TABLE(platform, sccnxp_id_table); -- cgit v0.10.2 From b64b9c937a533f0bfbfc9f6ac93d3c3e2f97ab02 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sat, 29 Sep 2012 21:31:08 +0200 Subject: uprobes/x86: Only rep+nop can be emulated correctly __skip_sstep() correctly detects the "nontrivial" nop insns, but since it doesn't update regs->ip we can not really skip "0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0", the probed application is killed by SIGILL'ed handle_swbp(). Remove these additional checks. If we want to implement this correctly we need to know the full insn length to update ->ip. rep* + nop is fine even without updating ->ip. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index 9538f00..aafa555 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -651,31 +651,19 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) /* * Skip these instructions as per the currently known x86 ISA. - * 0x66* { 0x90 | 0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0 } + * rep=0x66*; nop=0x90 */ static bool __skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs) { int i; for (i = 0; i < MAX_UINSN_BYTES; i++) { - if ((auprobe->insn[i] == 0x66)) + if (auprobe->insn[i] == 0x66) continue; if (auprobe->insn[i] == 0x90) return true; - if (i == (MAX_UINSN_BYTES - 1)) - break; - - if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x1f)) - return true; - - if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x19)) - return true; - - if ((auprobe->insn[i] == 0x87) && (auprobe->insn[i+1] == 0xc0)) - return true; - break; } return false; -- cgit v0.10.2 From a5f658b71bc622b731961ea3addcf146ed3c599f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 18:21:09 +0200 Subject: uprobes: Don't return success if alloc_uprobe() fails If alloc_uprobe() fails uprobe_register() should return ENOMEM, not 0. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 6136854..588a557 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -813,7 +813,9 @@ int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer * mutex_lock(uprobes_hash(inode)); uprobe = alloc_uprobe(inode, offset); - if (uprobe && !consumer_add(uprobe, uc)) { + if (!uprobe) { + ret = -ENOMEM; + } else if (!consumer_add(uprobe, uc)) { ret = __uprobe_register(uprobe); if (ret) { uprobe->consumers = NULL; -- cgit v0.10.2 From 076a365b3da99b68c5d58e394714d0611f1fa002 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 18:54:53 +0200 Subject: uprobes: Do not delete uprobe if uprobe_unregister() fails delete_uprobe() must not be called if register_for_each_vma(false) fails to remove all breakpoints, __uprobe_unregister() is correct. The problem is that register_for_each_vma(false) always returns 0 and thus this logic does not work. 1. Change verify_opcode() to return 0 rather than -EINVAL when unregister detects the !is_swbp insn, we can treat this case as success and currently unregister paths ignore the error code anyway. 2. Change remove_breakpoint() to propagate the error code from write_opcode(). 3. Change register_for_each_vma(is_register => false) to remove as much breakpoints as possible but return non-zero if remove_breakpoint() fails at least once. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 588a557..a1b466d 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -203,7 +203,7 @@ static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t return 0; } else { if (!is_swbp) /* unregister: was it changed by us? */ - return -EINVAL; + return 0; } return 1; @@ -616,15 +616,15 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, return ret; } -static void +static int remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr) { /* can happen if uprobe_register() fails */ if (!test_bit(MMF_HAS_UPROBES, &mm->flags)) - return; + return 0; set_bit(MMF_RECALC_UPROBES, &mm->flags); - set_orig_insn(&uprobe->arch, mm, vaddr); + return set_orig_insn(&uprobe->arch, mm, vaddr); } /* @@ -740,7 +740,7 @@ static int register_for_each_vma(struct uprobe *uprobe, bool is_register) struct mm_struct *mm = info->mm; struct vm_area_struct *vma; - if (err) + if (err && is_register) goto free; down_write(&mm->mmap_sem); @@ -756,7 +756,7 @@ static int register_for_each_vma(struct uprobe *uprobe, bool is_register) if (is_register) err = install_breakpoint(uprobe, mm, vma, info->vaddr); else - remove_breakpoint(uprobe, mm, info->vaddr); + err |= remove_breakpoint(uprobe, mm, info->vaddr); unlock: up_write(&mm->mmap_sem); -- cgit v0.10.2 From 142b18ddc81439acda4bc4231b291e99fe67d507 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sat, 29 Sep 2012 21:56:57 +0200 Subject: uprobes: Fix handle_swbp() vs unregister() + register() race Strictly speaking this race was added by me in 56bb4cf6. However I think that this bug is just another indication that we should move copy_insn/uprobe_analyze_insn code from install_breakpoint() to uprobe_register(), there are a lot of other reasons for that. Until then, add a hack to close the race. A task can hit uprobe U1, but before it calls find_uprobe() this uprobe can be unregistered *AND* another uprobe U2 can be added to uprobes_tree at the same inode/offset. In this case handle_swbp() will use the not-fully-initialized U2, in particular its arch.insn for xol. Add the additional !UPROBE_COPY_INSN check into handle_swbp(), if this flag is not set we simply restart as if the new uprobe was not inserted yet. This is not very nice, we need barriers, but we will remove this hack when we change uprobe_register(). Note: with or without this patch install_breakpoint() can race with itself, yet another reson to kill UPROBE_COPY_INSN altogether. And even the usage of uprobe->flags is not safe. See the next patches. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index a1b466d..c718fef 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -596,6 +596,7 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, BUG_ON((uprobe->offset & ~PAGE_MASK) + UPROBE_SWBP_INSN_SIZE > PAGE_SIZE); + smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ uprobe->flags |= UPROBE_COPY_INSN; } @@ -1436,6 +1437,14 @@ static void handle_swbp(struct pt_regs *regs) } return; } + /* + * TODO: move copy_insn/etc into _register and remove this hack. + * After we hit the bp, _unregister + _register can install the + * new and not-yet-analyzed uprobe at the same address, restart. + */ + smp_rmb(); /* pairs with wmb() in install_breakpoint() */ + if (unlikely(!(uprobe->flags & UPROBE_COPY_INSN))) + goto restart; utask = current->utask; if (!utask) { -- cgit v0.10.2 From cb9a19fe4aa51afa34786bd383e6614fa0083d58 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 20:11:45 +0200 Subject: uprobes: Introduce prepare_uprobe() Preparation. Extract the copy_insn/arch_uprobe_analyze_insn code from install_breakpoint() into the new helper, prepare_uprobe(). And move uprobe->flags defines from uprobes.h to uprobes.c, nobody else can use them anyway. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index 18d839d..2459457 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -35,16 +35,6 @@ struct inode; # include #endif -/* flags that denote/change uprobes behaviour */ - -/* Have a copy of original instruction */ -#define UPROBE_COPY_INSN 0x1 - -/* Dont run handlers when first register/ last unregister in progress*/ -#define UPROBE_RUN_HANDLER 0x2 -/* Can skip singlestep */ -#define UPROBE_SKIP_SSTEP 0x4 - struct uprobe_consumer { int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs); /* diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index c718fef..4f315fa 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -78,6 +78,13 @@ static struct mutex uprobes_mmap_mutex[UPROBES_HASH_SZ]; */ static atomic_t uprobe_events = ATOMIC_INIT(0); +/* Have a copy of original instruction */ +#define UPROBE_COPY_INSN 0x1 +/* Dont run handlers when first register/ last unregister in progress*/ +#define UPROBE_RUN_HANDLER 0x2 +/* Can skip singlestep */ +#define UPROBE_SKIP_SSTEP 0x4 + struct uprobe { struct rb_node rb_node; /* node in the rb tree */ atomic_t ref; @@ -563,6 +570,37 @@ static int copy_insn(struct uprobe *uprobe, struct file *filp) return __copy_insn(mapping, filp, uprobe->arch.insn, bytes, uprobe->offset); } +static int prepare_uprobe(struct uprobe *uprobe, struct file *file, + struct mm_struct *mm, unsigned long vaddr) +{ + int ret = 0; + + if (uprobe->flags & UPROBE_COPY_INSN) + return ret; + + ret = copy_insn(uprobe, file); + if (ret) + goto out; + + ret = -ENOTSUPP; + if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn)) + goto out; + + ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr); + if (ret) + goto out; + + /* write_opcode() assumes we don't cross page boundary */ + BUG_ON((uprobe->offset & ~PAGE_MASK) + + UPROBE_SWBP_INSN_SIZE > PAGE_SIZE); + + smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ + uprobe->flags |= UPROBE_COPY_INSN; + + out: + return ret; +} + static int install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, struct vm_area_struct *vma, unsigned long vaddr) @@ -580,25 +618,9 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, if (!uprobe->consumers) return 0; - if (!(uprobe->flags & UPROBE_COPY_INSN)) { - ret = copy_insn(uprobe, vma->vm_file); - if (ret) - return ret; - - if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn)) - return -ENOTSUPP; - - ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr); - if (ret) - return ret; - - /* write_opcode() assumes we don't cross page boundary */ - BUG_ON((uprobe->offset & ~PAGE_MASK) + - UPROBE_SWBP_INSN_SIZE > PAGE_SIZE); - - smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ - uprobe->flags |= UPROBE_COPY_INSN; - } + ret = prepare_uprobe(uprobe, vma->vm_file, mm, vaddr); + if (ret) + return ret; /* * set MMF_HAS_UPROBES in advance for uprobe_pre_sstep_notifier(), -- cgit v0.10.2 From 4710f05fd146d4739e57a8832a3abc5bd3bf0997 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 20:31:41 +0200 Subject: uprobes: Fix prepare_uprobe() race with itself install_breakpoint() is called under mm->mmap_sem, this protects set_swbp() but not prepare_uprobe(). Two or more different tasks can call install_breakpoint()->prepare_uprobe() at the same time, this leads to numerous problems if UPROBE_COPY_INSN is not set. Just for example, the second copy_insn() can corrupt the already analyzed/fixuped uprobe->arch.insn and race with handle_swbp(). This patch simply adds uprobe->copy_mutex to serialize this code. We could probably reuse ->consumer_rwsem, but this would mean that consumer->handler() can not use mm->mmap_sem, not good. Note: this is another temporary ugly hack until we move this logic into uprobe_register(). Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 4f315fa..7f62b30 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -89,6 +89,7 @@ struct uprobe { struct rb_node rb_node; /* node in the rb tree */ atomic_t ref; struct rw_semaphore consumer_rwsem; + struct mutex copy_mutex; /* TODO: kill me and UPROBE_COPY_INSN */ struct list_head pending_list; struct uprobe_consumer *consumers; struct inode *inode; /* Also hold a ref to inode */ @@ -444,6 +445,7 @@ static struct uprobe *alloc_uprobe(struct inode *inode, loff_t offset) uprobe->inode = igrab(inode); uprobe->offset = offset; init_rwsem(&uprobe->consumer_rwsem); + mutex_init(&uprobe->copy_mutex); /* add to uprobes_tree, sorted on inode:offset */ cur_uprobe = insert_uprobe(uprobe); @@ -578,6 +580,10 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, if (uprobe->flags & UPROBE_COPY_INSN) return ret; + mutex_lock(&uprobe->copy_mutex); + if (uprobe->flags & UPROBE_COPY_INSN) + goto out; + ret = copy_insn(uprobe, file); if (ret) goto out; @@ -598,6 +604,8 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, uprobe->flags |= UPROBE_COPY_INSN; out: + mutex_unlock(&uprobe->copy_mutex); + return ret; } -- cgit v0.10.2 From 71434f2fcba5c22d6e0d51878ba8e241a5dea5fb Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 30 Sep 2012 21:12:44 +0200 Subject: uprobes: Fix the racy uprobe->flags manipulation Multiple threads can manipulate uprobe->flags, this is obviously unsafe. For example mmap can set UPROBE_COPY_INSN while register tries to set UPROBE_RUN_HANDLER, the latter can also race with can_skip_sstep() which clears UPROBE_SKIP_SSTEP. Change this code to use bitops. Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 7f62b30..c92651d 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -79,11 +79,11 @@ static struct mutex uprobes_mmap_mutex[UPROBES_HASH_SZ]; static atomic_t uprobe_events = ATOMIC_INIT(0); /* Have a copy of original instruction */ -#define UPROBE_COPY_INSN 0x1 +#define UPROBE_COPY_INSN 0 /* Dont run handlers when first register/ last unregister in progress*/ -#define UPROBE_RUN_HANDLER 0x2 +#define UPROBE_RUN_HANDLER 1 /* Can skip singlestep */ -#define UPROBE_SKIP_SSTEP 0x4 +#define UPROBE_SKIP_SSTEP 2 struct uprobe { struct rb_node rb_node; /* node in the rb tree */ @@ -94,7 +94,7 @@ struct uprobe { struct uprobe_consumer *consumers; struct inode *inode; /* Also hold a ref to inode */ loff_t offset; - int flags; + unsigned long flags; struct arch_uprobe arch; }; @@ -423,7 +423,7 @@ static struct uprobe *insert_uprobe(struct uprobe *uprobe) spin_unlock(&uprobes_treelock); /* For now assume that the instruction need not be single-stepped */ - uprobe->flags |= UPROBE_SKIP_SSTEP; + __set_bit(UPROBE_SKIP_SSTEP, &uprobe->flags); return u; } @@ -466,7 +466,7 @@ static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs) { struct uprobe_consumer *uc; - if (!(uprobe->flags & UPROBE_RUN_HANDLER)) + if (!test_bit(UPROBE_RUN_HANDLER, &uprobe->flags)) return; down_read(&uprobe->consumer_rwsem); @@ -577,11 +577,11 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, { int ret = 0; - if (uprobe->flags & UPROBE_COPY_INSN) + if (test_bit(UPROBE_COPY_INSN, &uprobe->flags)) return ret; mutex_lock(&uprobe->copy_mutex); - if (uprobe->flags & UPROBE_COPY_INSN) + if (test_bit(UPROBE_COPY_INSN, &uprobe->flags)) goto out; ret = copy_insn(uprobe, file); @@ -601,7 +601,7 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, UPROBE_SWBP_INSN_SIZE > PAGE_SIZE); smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ - uprobe->flags |= UPROBE_COPY_INSN; + set_bit(UPROBE_COPY_INSN, &uprobe->flags); out: mutex_unlock(&uprobe->copy_mutex); @@ -852,7 +852,7 @@ int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer * uprobe->consumers = NULL; __uprobe_unregister(uprobe); } else { - uprobe->flags |= UPROBE_RUN_HANDLER; + set_bit(UPROBE_RUN_HANDLER, &uprobe->flags); } } @@ -885,7 +885,7 @@ void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consume if (consumer_del(uprobe, uc)) { if (!uprobe->consumers) { __uprobe_unregister(uprobe); - uprobe->flags &= ~UPROBE_RUN_HANDLER; + clear_bit(UPROBE_RUN_HANDLER, &uprobe->flags); } } @@ -1346,10 +1346,10 @@ bool uprobe_deny_signal(void) */ static bool can_skip_sstep(struct uprobe *uprobe, struct pt_regs *regs) { - if (uprobe->flags & UPROBE_SKIP_SSTEP) { + if (test_bit(UPROBE_SKIP_SSTEP, &uprobe->flags)) { if (arch_uprobe_skip_sstep(&uprobe->arch, regs)) return true; - uprobe->flags &= ~UPROBE_SKIP_SSTEP; + clear_bit(UPROBE_SKIP_SSTEP, &uprobe->flags); } return false; } @@ -1473,7 +1473,7 @@ static void handle_swbp(struct pt_regs *regs) * new and not-yet-analyzed uprobe at the same address, restart. */ smp_rmb(); /* pairs with wmb() in install_breakpoint() */ - if (unlikely(!(uprobe->flags & UPROBE_COPY_INSN))) + if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags))) goto restart; utask = current->utask; -- cgit v0.10.2 From c77d7162a7ae451c2e895d7ef7fbeb0906107472 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sat, 6 Oct 2012 10:20:16 +0200 Subject: drm/i915: remove useless BUG_ON which caused a regression in 3.5. starting an old X server causes a kernel BUG since commit 1b50247a8d: ------------[ cut here ]------------ kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3661! invalid opcode: 0000 [#1] SMP Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss uvcvideo +videobuf2_core videodev videobuf2_vmalloc videobuf2_memops uhci_hcd ath9k mac80211 snd_hda_codec_realtek ath9k_common microcode +ath9k_hw psmouse serio_raw sg ath cfg80211 atl1c lpc_ich mfd_core ehci_hcd snd_hda_intel snd_hda_codec snd_hwdep snd_pcm rtc_cmos +snd_timer snd evdev eeepc_laptop snd_page_alloc sparse_keymap Pid: 2866, comm: X Not tainted 3.5.6-rc1-eeepc #1 ASUSTeK Computer INC. 1005HA/1005HA EIP: 0060:[] EFLAGS: 00013297 CPU: 0 EIP is at i915_gem_entervt_ioctl+0xf1/0x110 EAX: f5941df4 EBX: f5940000 ECX: 00000000 EDX: 00020000 ESI: f5835400 EDI: 00000000 EBP: f51d7e38 ESP: f51d7e20 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b760e0a0 CR3: 351b6000 CR4: 000007d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process X (pid: 2866, ti=f51d6000 task=f61af8d0 task.ti=f51d6000) Stack: 00000001 00000000 f5835414 f51d7e84 f5835400 f54f85c0 f51d7f10 c12b530b 00000001 c151b139 c14751b6 c152e030 00000b32 00006459 00000059 0000e200 00000001 00000000 00006459 c159ddd0 c12dc1a0 ffffffea 00000000 00000000 Call Trace: [] drm_ioctl+0x2eb/0x440 [] ? i915_gem_init+0xe0/0xe0 [] ? enqueue_hrtimer+0x1b/0x50 [] ? __hrtimer_start_range_ns+0x161/0x330 [] ? lock_hrtimer_base+0x23/0x50 [] ? hrtimer_try_to_cancel+0x33/0x70 [] ? drm_version+0x90/0x90 [] vfs_ioctl+0x31/0x50 [] do_vfs_ioctl+0x64/0x510 [] ? hrtimer_nanosleep+0x8e/0x100 [] ? update_rmtp+0x80/0x80 [] sys_ioctl+0x39/0x60 [] syscall_call+0x7/0xb Code: 83 c4 0c 5b 5e 5f 5d c3 c7 44 24 04 2c 05 53 c1 c7 04 24 6f ef 47 c1 e8 6e e0 fd ff c7 83 38 1e 00 00 00 00 00 00 e9 3f ff ff +ff <0f> 0b eb fe 0f 0b eb fe 8d b4 26 00 00 00 00 0f 0b eb fe 8d b6 EIP: [] i915_gem_entervt_ioctl+0xf1/0x110 SS:ESP 0068:f51d7e20 ---[ end trace dd332ec083cbd513 ]--- The crash happens here in i915_gem_entervt_ioctl() : 3659 BUG_ON(!list_empty(&dev_priv->mm.active_list)); 3660 BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); -> 3661 BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); 3662 mutex_unlock(&dev->struct_mutex); Quoting Chris : "That BUG_ON there is silly and can simply be removed. The check is to verify that no batches were submitted to the kernel whilst the UMS/GEM client was suspended - to which the BUG_ONs are a crude approximation. Furthermore, the checks are too late, since it means we attempted to program the hardware whilst it was in an invalid state, the BUG_ONs are the least of your concerns at that point." Note that this regression has been introduced in commit 1b50247a8ddde4af5aaa0e6bc125615372ce6c16 Author: Chris Wilson Date: Tue Apr 24 15:47:30 2012 +0100 drm/i915: Remove the list of pinned inactive objects Cc: Chris Wilson Signed-off-by: Willy Tarreau [danvet: Added note about the regressing commit and cc: stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b55eee3..53de95c 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4099,7 +4099,6 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, } BUG_ON(!list_empty(&dev_priv->mm.active_list)); - BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); mutex_unlock(&dev->struct_mutex); ret = drm_irq_install(dev); -- cgit v0.10.2 From 1d10ecf8371be22c68b2e52e7376c7075c97f656 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 27 Sep 2012 13:54:01 +0800 Subject: ARM: imx: fix return value check in imx3_init_l2x0() In case of error, the function ioremap() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9d2c843..b5deb05 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,9 +108,8 @@ void __init imx3_init_l2x0(void) } l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); + if (!l2x0_base) { + printk(KERN_ERR "remapping L2 cache area failed\n"); return; } -- cgit v0.10.2 From 964a4da327477c90aa764a1d986c58476502c0ff Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 14 Sep 2012 15:25:45 -0300 Subject: ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60 On mx35pdk board there is an 8-bit microcontroller that controls several IOs, such as backlight enable pin, USB host VBUS, etc. Let it build by default. mx35pdk also needs CONFIG_LCD_PLATFORM to be selected to activate the display, so also make this the default. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 3c9f32f..c80782b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -142,6 +142,7 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y @@ -158,6 +159,7 @@ CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y CONFIG_FB=y +CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y -- cgit v0.10.2 From e0654d0177a85490b3e61b080a09aace66805c0a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 21 Sep 2012 14:14:25 +0800 Subject: ARM: imx: fix the return value check in imx_clk_busy_divider() In case of error, the function clk_register() returns ERR_PTR() no NULL pointer. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1a7a8dd..1ab91b5 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -108,7 +108,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, busy->div.hw.init = &init; clk = clk_register(NULL, &busy->div.hw); - if (!clk) + if (IS_ERR(clk)) kfree(busy); return clk; -- cgit v0.10.2 From 6ce9410047f9f06c1b3336d5215402b77d6fd70f Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 4 Oct 2012 19:20:03 +0200 Subject: drm/i915: paper over a pipe-enable vs pageflip race I've discovered this on my ivb machine while stress-testing the new flip_tests. Only harmful effect observed is that the timestamp is a bit bogus. Note that this is empirical duct-tape: I've noticed that we seem to only ever miss the very first vblank irq right after enabling the pipe. And with this hack applied I couldn't reproduce the failure case anywhere else any more. Tested-by: Imre Deak Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 67912fe..9cecfd7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3253,6 +3253,16 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) if (HAS_PCH_CPT(dev)) intel_cpt_verify_modeset(dev, intel_crtc->pipe); + + /* + * There seems to be a race in PCH platform hw (at least on some + * outputs) where an enabled pipe still completes any pageflip right + * away (as if the pipe is off) instead of waiting for vblank. As soon + * as the first vblank happend, everything works as expected. Hence just + * wait for one vblank before returning to avoid strange things + * happening. + */ + intel_wait_for_vblank(dev, intel_crtc->pipe); } static void ironlake_crtc_disable(struct drm_crtc *crtc) -- cgit v0.10.2 From d01f87c0ffa96cb44faa78710711eb6e974b891c Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 4 Oct 2012 09:53:43 -0700 Subject: USB: Enable LPM after a failed probe. Before a driver is probed, we want to disable USB 3.0 Link Power Management (LPM), in case the driver needs hub-initiated LPM disabled. After the probe finishes, we want to attempt to re-enable LPM, order to balance the LPM ref count. When a probe fails (such as when libusual doesn't want to bind to a USB 3.0 mass storage device), make sure to balance the LPM ref counts by re-enabling LPM. This patch should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index ddd820d..6056db7 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -367,6 +367,10 @@ static int usb_probe_interface(struct device *dev) intf->condition = USB_INTERFACE_UNBOUND; usb_cancel_queued_reset(intf); + /* If the LPM disable succeeded, balance the ref counts. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ if (driver->supports_autosuspend) pm_runtime_disable(dev); -- cgit v0.10.2 From ae8963adb4ad8c5f2a89ca1d99fb7bb721e7599f Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 3 Oct 2012 11:18:05 -0700 Subject: usb: Don't enable LPM if the exit latency is zero. Some USB 3.0 devices signal that they don't implement Link PM by having all zeroes in the U1/U2 exit latencies in their SuperSpeed BOS descriptor. Don found that a Western Digital device he has experiences transfer errors when LPM is enabled. The lsusb shows the U1/U2 exit latencies are set to zero: Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 22 bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 0 micro seconds The fix is to not enable LPM for a particular link state if we find its corresponding exit latency is zero. This patch should be backported to kernels as old as 3.5, that contain the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to enable/disable USB3 link states." Signed-off-by: Sarah Sharp Reported-by: Don Zickus Tested-by: Don Zickus Cc: stable@vger.kernel.org diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 673ee46..8f04787 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3415,6 +3415,16 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout; + __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; + __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; + + /* If the device says it doesn't have *any* exit latency to come out of + * U1 or U2, it's probably lying. Assume it doesn't implement that link + * state. + */ + if ((state == USB3_LPM_U1 && u1_mel == 0) || + (state == USB3_LPM_U2 && u2_mel == 0)) + return; /* We allow the host controller to set the U1/U2 timeout internally * first, so that it can change its schedule to account for the -- cgit v0.10.2 From 65a95b75bc5afa7bbb844e222481044c1c4767eb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 5 Oct 2012 10:32:07 -0700 Subject: usb: Send Set SEL before enabling parent U1/U2 timeout. The Set SEL control transfer tells a device the exit latencies associated with a device-initated U1 or U2 exit. Since a parent hub may initiate a transition to U1 soon after a downstream port's U1 timeout is set, we need to make sure the device receives the Set SEL transfer before the parent hub timeout is set. This patch should be backported to kernels as old as 3.5, that contain the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to enable/disable USB3 link states." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8f04787..b8e11ff 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3320,16 +3320,6 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, if (enable) { /* - * First, let the device know about the exit latencies - * associated with the link state we're about to enable. - */ - ret = usb_req_set_sel(udev, state); - if (ret < 0) { - dev_warn(&udev->dev, "Set SEL for device-initiated " - "%s failed.\n", usb3_lpm_names[state]); - return -EBUSY; - } - /* * Now send the control transfer to enable device-initiated LPM * for either U1 or U2. */ @@ -3414,7 +3404,7 @@ static int usb_set_lpm_timeout(struct usb_device *udev, static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { - int timeout; + int timeout, ret; __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; @@ -3426,6 +3416,17 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, (state == USB3_LPM_U2 && u2_mel == 0)) return; + /* + * First, let the device know about the exit latencies + * associated with the link state we're about to enable. + */ + ret = usb_req_set_sel(udev, state); + if (ret < 0) { + dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n", + usb3_lpm_names[state]); + return; + } + /* We allow the host controller to set the U1/U2 timeout internally * first, so that it can change its schedule to account for the * additional latency to send data to a device in a lower power -- cgit v0.10.2 From 1510a1a2d0946b34422fe8816187f274a5086904 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 5 Oct 2012 10:30:35 -0700 Subject: usb: trival: Fix debugging units mistake. SEL and PEL are in microseconds, not milliseconds. Also, fix a split string that will trigger checkpatch warnings. Signed-off-by: Sarah Sharp diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b8e11ff..64854d7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3241,8 +3241,7 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state) (state == USB3_LPM_U2 && (u2_sel > USB3_LPM_MAX_U2_SEL_PEL || u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) { - dev_dbg(&udev->dev, "Device-initiated %s disabled due " - "to long SEL %llu ms or PEL %llu ms\n", + dev_dbg(&udev->dev, "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\n", usb3_lpm_names[state], u1_sel, u1_pel); return -EINVAL; } -- cgit v0.10.2 From b61a602ee6730150f4d0df730d9312ac4d820ceb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 9 Oct 2012 13:04:34 +0900 Subject: ipvs: initialize returned data in do_ip_vs_get_ctl As reported by a gcc warning, the do_ip_vs_get_ctl does not initalize all the members of the ip_vs_timeout_user structure it returns if at least one of the TCP or UDP protocols is disabled for ipvs. This makes sure that the data is always initialized, before it is returned as a response to IPVS_CMD_GET_CONFIG or printed as a debug message in IPVS_CMD_SET_CONFIG. Without this patch, building ARM ixp4xx_defconfig results in: net/netfilter/ipvs/ip_vs_ctl.c: In function 'ip_vs_genl_set_cmd': net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.udp_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.udp_timeout' was declared here net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.tcp_fin_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.tcp_fin_timeout' was declared here net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.tcp_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.tcp_timeout' was declared here Signed-off-by: Arnd Bergmann Acked-by: Julian Anastasov Signed-off-by: Simon Horman diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 7e7198b..c4ee437 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2589,6 +2589,8 @@ __ip_vs_get_timeouts(struct net *net, struct ip_vs_timeout_user *u) struct ip_vs_proto_data *pd; #endif + memset(u, 0, sizeof (*u)); + #ifdef CONFIG_IP_VS_PROTO_TCP pd = ip_vs_proto_data_get(net, IPPROTO_TCP); u->tcp_timeout = pd->timeout_table[IP_VS_TCP_S_ESTABLISHED] / HZ; @@ -2766,7 +2768,6 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) { struct ip_vs_timeout_user t; - memset(&t, 0, sizeof(t)); __ip_vs_get_timeouts(net, &t); if (copy_to_user(user, &t, sizeof(t)) != 0) ret = -EFAULT; -- cgit v0.10.2 From ca057410a8ea88ffb3ce6a581377cffa71ac01c6 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Sat, 6 Oct 2012 07:38:16 -0400 Subject: ARM: pxa: Fix build error caused by sram.h rename Commit 293b2da1b61 ("ARM: pxa: move platform_data definitions") renamed arch/arm/mach-mmp/include/mach/sram.h to include/linux/platform_data/dma-mmp_tdma.h, but didn't update mmp-pcm.c which uses the header. Fix the build error. Signed-off-by: Chris Ball Acked-by: Arnd Bergmann Signed-off-by: Mark Brown diff --git a/sound/soc/pxa/mmp-pcm.c b/sound/soc/pxa/mmp-pcm.c index 73ac546..e834faf 100644 --- a/sound/soc/pxa/mmp-pcm.c +++ b/sound/soc/pxa/mmp-pcm.c @@ -15,13 +15,13 @@ #include #include #include +#include #include #include #include #include #include #include -#include #include struct mmp_dma_data { -- cgit v0.10.2 From a92b078eab17d09ac600446954d8b0d7998c6168 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 2 Oct 2012 14:08:19 +0200 Subject: ASoC: fix documentation in soc-jack Signed-off-by: Peter Meerwald Signed-off-by: Mark Brown diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index fa0fd8d..1ab5fe0 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -22,7 +22,7 @@ /** * snd_soc_jack_new - Create a new jack - * @card: ASoC card + * @codec: ASoC codec * @id: an identifying string for this jack * @type: a bitmask of enum snd_jack_type values that can be detected by * this jack @@ -133,12 +133,13 @@ EXPORT_SYMBOL_GPL(snd_soc_jack_add_zones); /** * snd_soc_jack_get_type - Based on the mic bias value, this function returns - * the type of jack from the zones delcared in the jack type + * the type of jack from the zones declared in the jack type * + * @jack: ASoC jack * @micbias_voltage: mic bias voltage at adc channel when jack is plugged in * * Based on the mic bias value passed, this function helps identify - * the type of jack from the already delcared jack zones + * the type of jack from the already declared jack zones */ int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage) { -- cgit v0.10.2 From 57451e437796548d658d03c2c4aab659eafcd799 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 3 Oct 2012 14:33:50 +0200 Subject: ASoC: fsi: don't reschedule DMA from an atomic context shdma doesn't support transfer re-scheduling or triggering from callbacks or from atomic context. The fsi driver issues DMA transfers from a tasklet context, which is a bug. To fix it convert tasklet to a work. Reported-by: Do Q.Thang Tested-by: Do Q.Thang Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 5328ae5..9d7f307 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -223,7 +224,7 @@ struct fsi_stream { */ struct dma_chan *chan; struct sh_dmae_slave slave; /* see fsi_handler_init() */ - struct tasklet_struct tasklet; + struct work_struct work; dma_addr_t dma; }; @@ -1085,9 +1086,9 @@ static void fsi_dma_complete(void *data) snd_pcm_period_elapsed(io->substream); } -static void fsi_dma_do_tasklet(unsigned long data) +static void fsi_dma_do_work(struct work_struct *work) { - struct fsi_stream *io = (struct fsi_stream *)data; + struct fsi_stream *io = container_of(work, struct fsi_stream, work); struct fsi_priv *fsi = fsi_stream_to_priv(io); struct snd_soc_dai *dai; struct dma_async_tx_descriptor *desc; @@ -1129,7 +1130,7 @@ static void fsi_dma_do_tasklet(unsigned long data) * FIXME * * In DMAEngine case, codec and FSI cannot be started simultaneously - * since FSI is using tasklet. + * since FSI is using the scheduler work queue. * Therefore, in capture case, probably FSI FIFO will have got * overflow error in this point. * in that case, DMA cannot start transfer until error was cleared. @@ -1153,7 +1154,7 @@ static bool fsi_dma_filter(struct dma_chan *chan, void *param) static int fsi_dma_transfer(struct fsi_priv *fsi, struct fsi_stream *io) { - tasklet_schedule(&io->tasklet); + schedule_work(&io->work); return 0; } @@ -1195,14 +1196,14 @@ static int fsi_dma_probe(struct fsi_priv *fsi, struct fsi_stream *io, struct dev return fsi_stream_probe(fsi, dev); } - tasklet_init(&io->tasklet, fsi_dma_do_tasklet, (unsigned long)io); + INIT_WORK(&io->work, fsi_dma_do_work); return 0; } static int fsi_dma_remove(struct fsi_priv *fsi, struct fsi_stream *io) { - tasklet_kill(&io->tasklet); + cancel_work_sync(&io->work); fsi_stream_stop(fsi, io); -- cgit v0.10.2 From 961a7aeafab477f63d9eef26afde9cbb8badcd0f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 1 Oct 2012 12:29:26 +0300 Subject: ASoC: dmaengine: Correct Makefile when sound is built as module soc-dmaengine-pcm library need to be part of the snd-soc-core in order to be able to compile ASoC as modules when dmaengine is enabled on the platform. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown diff --git a/sound/soc/Makefile b/sound/soc/Makefile index bcbf1d0..99f32f7 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,8 +1,9 @@ snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-cache.o soc-utils.o snd-soc-core-objs += soc-pcm.o soc-compress.o soc-io.o -snd-soc-dmaengine-pcm-objs := soc-dmaengine-pcm.o -obj-$(CONFIG_SND_SOC_DMAENGINE_PCM) += snd-soc-dmaengine-pcm.o +ifneq ($(CONFIG_SND_SOC_DMAENGINE_PCM),) +snd-soc-core-objs += soc-dmaengine-pcm.o +endif obj-$(CONFIG_SND_SOC) += snd-soc-core.o obj-$(CONFIG_SND_SOC) += codecs/ -- cgit v0.10.2 From 3b4d6c8283bd676e4e8dc2c3c96d4a024ca2d7f3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 8 Oct 2012 23:20:00 -0300 Subject: ARM: imx: clk-imx27: Fix divider width field As per mx27 reference manual, H264DIV and SSI2DIV are 6-bit wide fields in register PCDR0. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index f69ca46..a85d330 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -109,7 +109,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6); clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); - clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3); + clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3); clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); @@ -121,7 +121,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3); + clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0); clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0); clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1); -- cgit v0.10.2 From 10b3a979347d4aba7de19e8d33eb8b87fe2a11dd Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:47:06 +0100 Subject: UAPI: (Scripted) Disintegrate arch/m68k/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index bfe675f..e1d382f 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,5 +1,3 @@ -include include/asm-generic/Kbuild.asm -header-y += cachectl.h generic-y += bitsperlong.h generic-y += clkdev.h diff --git a/arch/m68k/include/asm/a.out.h b/arch/m68k/include/asm/a.out.h deleted file mode 100644 index 3885fe4..0000000 --- a/arch/m68k/include/asm/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __M68K_A_OUT_H__ -#define __M68K_A_OUT_H__ - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __M68K_A_OUT_H__ */ diff --git a/arch/m68k/include/asm/auxvec.h b/arch/m68k/include/asm/auxvec.h deleted file mode 100644 index 844d6d5..0000000 --- a/arch/m68k/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMm68k_AUXVEC_H -#define __ASMm68k_AUXVEC_H - -#endif diff --git a/arch/m68k/include/asm/byteorder.h b/arch/m68k/include/asm/byteorder.h deleted file mode 100644 index 31b260a..0000000 --- a/arch/m68k/include/asm/byteorder.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_BYTEORDER_H -#define _M68K_BYTEORDER_H - -#include - -#endif /* _M68K_BYTEORDER_H */ diff --git a/arch/m68k/include/asm/cachectl.h b/arch/m68k/include/asm/cachectl.h deleted file mode 100644 index 525978e..0000000 --- a/arch/m68k/include/asm/cachectl.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _M68K_CACHECTL_H -#define _M68K_CACHECTL_H - -/* Definitions for the cacheflush system call. */ - -#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */ -#define FLUSH_SCOPE_PAGE 2 /* Flush a page */ -#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */ - -#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */ -#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */ -#define FLUSH_CACHE_BOTH 3 /* Flush both caches */ - -#endif /* _M68K_CACHECTL_H */ diff --git a/arch/m68k/include/asm/fcntl.h b/arch/m68k/include/asm/fcntl.h deleted file mode 100644 index 1c369b2..0000000 --- a/arch/m68k/include/asm/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _M68K_FCNTL_H -#define _M68K_FCNTL_H - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ -#define O_LARGEFILE 0400000 - -#include - -#endif /* _M68K_FCNTL_H */ diff --git a/arch/m68k/include/asm/ioctls.h b/arch/m68k/include/asm/ioctls.h deleted file mode 100644 index 1332bb4..0000000 --- a/arch/m68k/include/asm/ioctls.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ARCH_M68K_IOCTLS_H__ -#define __ARCH_M68K_IOCTLS_H__ - -#define FIOQSIZE 0x545E - -#include - -#endif /* __ARCH_M68K_IOCTLS_H__ */ diff --git a/arch/m68k/include/asm/msgbuf.h b/arch/m68k/include/asm/msgbuf.h deleted file mode 100644 index 243cb79..0000000 --- a/arch/m68k/include/asm/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _M68K_MSGBUF_H -#define _M68K_MSGBUF_H - -/* - * The msqid64_ds structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _M68K_MSGBUF_H */ diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h deleted file mode 100644 index 36265cc..0000000 --- a/arch/m68k/include/asm/param.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _M68K_PARAM_H -#define _M68K_PARAM_H - -#ifdef __uClinux__ -#define EXEC_PAGESIZE 4096 -#else -#define EXEC_PAGESIZE 8192 -#endif - -#include - -#endif /* _M68K_PARAM_H */ diff --git a/arch/m68k/include/asm/poll.h b/arch/m68k/include/asm/poll.h deleted file mode 100644 index f080fcd..0000000 --- a/arch/m68k/include/asm/poll.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __m68k_POLL_H -#define __m68k_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 256 - -#include - -#endif diff --git a/arch/m68k/include/asm/posix_types.h b/arch/m68k/include/asm/posix_types.h deleted file mode 100644 index cf4dbf7..0000000 --- a/arch/m68k/include/asm/posix_types.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ARCH_M68K_POSIX_TYPES_H -#define __ARCH_M68K_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t - -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t - -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -#define __kernel_uid_t __kernel_uid_t - -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h index 65322b1..7b537cc 100644 --- a/arch/m68k/include/asm/ptrace.h +++ b/arch/m68k/include/asm/ptrace.h @@ -1,81 +1,12 @@ #ifndef _M68K_PTRACE_H #define _M68K_PTRACE_H -#define PT_D1 0 -#define PT_D2 1 -#define PT_D3 2 -#define PT_D4 3 -#define PT_D5 4 -#define PT_D6 5 -#define PT_D7 6 -#define PT_A0 7 -#define PT_A1 8 -#define PT_A2 9 -#define PT_A3 10 -#define PT_A4 11 -#define PT_A5 12 -#define PT_A6 13 -#define PT_D0 14 -#define PT_USP 15 -#define PT_ORIG_D0 16 -#define PT_SR 17 -#define PT_PC 18 +#include #ifndef __ASSEMBLY__ - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long d1; - long d2; - long d3; - long d4; - long d5; - long a0; - long a1; - long a2; - long d0; - long orig_d0; - long stkadj; #ifdef CONFIG_COLDFIRE - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ - unsigned short sr; - unsigned long pc; #else - unsigned short sr; - unsigned long pc; - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ #endif -}; - -/* - * This is the extended stack used by signal handlers and the context - * switcher: it's pushed after the normal "struct pt_regs". - */ -struct switch_stack { - unsigned long d6; - unsigned long d7; - unsigned long a3; - unsigned long a4; - unsigned long a5; - unsigned long a6; - unsigned long retpc; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -#define PTRACE_GET_THREAD_AREA 25 - -#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */ - -#ifdef __KERNEL__ #ifndef PS_S #define PS_S (0x2000) @@ -92,6 +23,5 @@ struct switch_stack { #define arch_has_block_step() (1) #endif -#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _M68K_PTRACE_H */ diff --git a/arch/m68k/include/asm/sembuf.h b/arch/m68k/include/asm/sembuf.h deleted file mode 100644 index 2308052..0000000 --- a/arch/m68k/include/asm/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _M68K_SEMBUF_H -#define _M68K_SEMBUF_H - -/* - * The semid64_ds structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _M68K_SEMBUF_H */ diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h index 00c2c53..65e78a2d 100644 --- a/arch/m68k/include/asm/setup.h +++ b/arch/m68k/include/asm/setup.h @@ -19,33 +19,12 @@ ** Redesign of the boot information structure; moved boot information ** structure to bootinfo.h */ - #ifndef _M68K_SETUP_H #define _M68K_SETUP_H +#include - /* - * Linux/m68k Architectures - */ - -#define MACH_AMIGA 1 -#define MACH_ATARI 2 -#define MACH_MAC 3 -#define MACH_APOLLO 4 -#define MACH_SUN3 5 -#define MACH_MVME147 6 -#define MACH_MVME16x 7 -#define MACH_BVME6000 8 -#define MACH_HP300 9 -#define MACH_Q40 10 -#define MACH_SUN3X 11 -#define MACH_M54XX 12 - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ - #define CL_SIZE COMMAND_LINE_SIZE #ifndef __ASSEMBLY__ @@ -194,63 +173,6 @@ extern unsigned long m68k_machtype; # define MACH_TYPE (m68k_machtype) #endif -#endif /* __KERNEL__ */ - - - /* - * CPU, FPU and MMU types - * - * Note: we may rely on the following equalities: - * - * CPU_68020 == MMU_68851 - * CPU_68030 == MMU_68030 - * CPU_68040 == FPU_68040 == MMU_68040 - * CPU_68060 == FPU_68060 == MMU_68060 - */ - -#define CPUB_68020 0 -#define CPUB_68030 1 -#define CPUB_68040 2 -#define CPUB_68060 3 -#define CPUB_COLDFIRE 4 - -#define CPU_68020 (1< +#include -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ /* Most things should be clean enough to redefine this at will, if care is taken to make libc match. */ @@ -20,92 +16,6 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ struct old_sigaction { __sighandler_t sa_handler; old_sigset_t sa_mask; @@ -123,31 +33,6 @@ struct sigaction { struct k_sigaction { struct sigaction sa; }; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ #include #ifndef CONFIG_CPU_HAS_NO_BITFIELDS @@ -208,5 +93,4 @@ struct pt_regs; extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); #endif /* __uClinux__ */ -#endif /* __KERNEL__ */ #endif /* _M68K_SIGNAL_H */ diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h deleted file mode 100644 index d1be684..0000000 --- a/arch/m68k/include/asm/socket.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/m68k/include/asm/sockios.h b/arch/m68k/include/asm/sockios.h deleted file mode 100644 index c04a239..0000000 --- a/arch/m68k/include/asm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_M68K_SOCKIOS__ -#define __ARCH_M68K_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* __ARCH_M68K_SOCKIOS__ */ diff --git a/arch/m68k/include/asm/stat.h b/arch/m68k/include/asm/stat.h deleted file mode 100644 index dd38bc2..0000000 --- a/arch/m68k/include/asm/stat.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _M68K_STAT_H -#define _M68K_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long __unused1; - unsigned long st_mtime; - unsigned long __unused2; - unsigned long st_ctime; - unsigned long __unused3; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad1[2]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[2]; - - long long st_size; - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#endif /* _M68K_STAT_H */ diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h deleted file mode 100644 index b7b37a4..0000000 --- a/arch/m68k/include/asm/swab.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _M68K_SWAB_H -#define _M68K_SWAB_H - -#include -#include - -#define __SWAB_64_THRU_32__ - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -{ - __asm__("byterev %0" : "=d" (val) : "0" (val)); - return val; -} - -#define __arch_swab32 __arch_swab32 -#elif !defined(__mcoldfire__) - -static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -{ - __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); - return val; -} -#define __arch_swab32 __arch_swab32 -#endif - -#endif /* _M68K_SWAB_H */ diff --git a/arch/m68k/include/asm/termbits.h b/arch/m68k/include/asm/termbits.h deleted file mode 100644 index aea1e37..0000000 --- a/arch/m68k/include/asm/termbits.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef __ARCH_M68K_TERMBITS_H__ -#define __ARCH_M68K_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ARCH_M68K_TERMBITS_H__ */ diff --git a/arch/m68k/include/asm/termios.h b/arch/m68k/include/asm/termios.h index 0823032..ad8efb0 100644 --- a/arch/m68k/include/asm/termios.h +++ b/arch/m68k/include/asm/termios.h @@ -1,27 +1,8 @@ #ifndef _M68K_TERMIOS_H #define _M68K_TERMIOS_H -#include -#include +#include -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ /* intr=^C quit=^| erase=del kill=^U eof=^D vtime=\0 vmin=\1 sxtc=\0 start=^Q stop=^S susp=^Z eol=\0 @@ -29,27 +10,6 @@ struct termio { eol2=\0 */ #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ /* * Translate a "termio" structure into a "termios". Ugh. @@ -87,6 +47,4 @@ struct termio { #define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) #define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) -#endif /* __KERNEL__ */ - #endif /* _M68K_TERMIOS_H */ diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 045cfd6..3334300 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -1,359 +1,8 @@ #ifndef _ASM_M68K_UNISTD_H_ #define _ASM_M68K_UNISTD_H_ -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -/*#define __NR_break 17*/ -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -/*#define __NR_stty 31*/ -/*#define __NR_gtty 32*/ -#define __NR_access 33 -#define __NR_nice 34 -/*#define __NR_ftime 35*/ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -/*#define __NR_prof 44*/ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -/*#define __NR_lock 53*/ -#define __NR_ioctl 54 -#define __NR_fcntl 55 -/*#define __NR_mpx 56*/ -#define __NR_setpgid 57 -/*#define __NR_ulimit 58*/ -/*#define __NR_oldolduname 59*/ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -/*#define __NR_profil 98*/ -#define __NR_statfs 99 -#define __NR_fstatfs 100 -/*#define __NR_ioperm 101*/ -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -/*#define __NR_olduname 109*/ -/*#define __NR_iopl 110*/ /* not supported */ -#define __NR_vhangup 111 -/*#define __NR_idle 112*/ /* Obsolete */ -/*#define __NR_vm86 113*/ /* not supported */ -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -/*#define __NR_afs_syscall 137*/ /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_getpagesize 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -/* 218*/ -/* 219*/ -#define __NR_getdents64 220 -#define __NR_gettid 221 -#define __NR_tkill 222 -#define __NR_setxattr 223 -#define __NR_lsetxattr 224 -#define __NR_fsetxattr 225 -#define __NR_getxattr 226 -#define __NR_lgetxattr 227 -#define __NR_fgetxattr 228 -#define __NR_listxattr 229 -#define __NR_llistxattr 230 -#define __NR_flistxattr 231 -#define __NR_removexattr 232 -#define __NR_lremovexattr 233 -#define __NR_fremovexattr 234 -#define __NR_futex 235 -#define __NR_sendfile64 236 -#define __NR_mincore 237 -#define __NR_madvise 238 -#define __NR_fcntl64 239 -#define __NR_readahead 240 -#define __NR_io_setup 241 -#define __NR_io_destroy 242 -#define __NR_io_getevents 243 -#define __NR_io_submit 244 -#define __NR_io_cancel 245 -#define __NR_fadvise64 246 -#define __NR_exit_group 247 -#define __NR_lookup_dcookie 248 -#define __NR_epoll_create 249 -#define __NR_epoll_ctl 250 -#define __NR_epoll_wait 251 -#define __NR_remap_file_pages 252 -#define __NR_set_tid_address 253 -#define __NR_timer_create 254 -#define __NR_timer_settime 255 -#define __NR_timer_gettime 256 -#define __NR_timer_getoverrun 257 -#define __NR_timer_delete 258 -#define __NR_clock_settime 259 -#define __NR_clock_gettime 260 -#define __NR_clock_getres 261 -#define __NR_clock_nanosleep 262 -#define __NR_statfs64 263 -#define __NR_fstatfs64 264 -#define __NR_tgkill 265 -#define __NR_utimes 266 -#define __NR_fadvise64_64 267 -#define __NR_mbind 268 -#define __NR_get_mempolicy 269 -#define __NR_set_mempolicy 270 -#define __NR_mq_open 271 -#define __NR_mq_unlink 272 -#define __NR_mq_timedsend 273 -#define __NR_mq_timedreceive 274 -#define __NR_mq_notify 275 -#define __NR_mq_getsetattr 276 -#define __NR_waitid 277 -/*#define __NR_vserver 278*/ -#define __NR_add_key 279 -#define __NR_request_key 280 -#define __NR_keyctl 281 -#define __NR_ioprio_set 282 -#define __NR_ioprio_get 283 -#define __NR_inotify_init 284 -#define __NR_inotify_add_watch 285 -#define __NR_inotify_rm_watch 286 -#define __NR_migrate_pages 287 -#define __NR_openat 288 -#define __NR_mkdirat 289 -#define __NR_mknodat 290 -#define __NR_fchownat 291 -#define __NR_futimesat 292 -#define __NR_fstatat64 293 -#define __NR_unlinkat 294 -#define __NR_renameat 295 -#define __NR_linkat 296 -#define __NR_symlinkat 297 -#define __NR_readlinkat 298 -#define __NR_fchmodat 299 -#define __NR_faccessat 300 -#define __NR_pselect6 301 -#define __NR_ppoll 302 -#define __NR_unshare 303 -#define __NR_set_robust_list 304 -#define __NR_get_robust_list 305 -#define __NR_splice 306 -#define __NR_sync_file_range 307 -#define __NR_tee 308 -#define __NR_vmsplice 309 -#define __NR_move_pages 310 -#define __NR_sched_setaffinity 311 -#define __NR_sched_getaffinity 312 -#define __NR_kexec_load 313 -#define __NR_getcpu 314 -#define __NR_epoll_pwait 315 -#define __NR_utimensat 316 -#define __NR_signalfd 317 -#define __NR_timerfd_create 318 -#define __NR_eventfd 319 -#define __NR_fallocate 320 -#define __NR_timerfd_settime 321 -#define __NR_timerfd_gettime 322 -#define __NR_signalfd4 323 -#define __NR_eventfd2 324 -#define __NR_epoll_create1 325 -#define __NR_dup3 326 -#define __NR_pipe2 327 -#define __NR_inotify_init1 328 -#define __NR_preadv 329 -#define __NR_pwritev 330 -#define __NR_rt_tgsigqueueinfo 331 -#define __NR_perf_event_open 332 -#define __NR_get_thread_area 333 -#define __NR_set_thread_area 334 -#define __NR_atomic_cmpxchg_32 335 -#define __NR_atomic_barrier 336 -#define __NR_fanotify_init 337 -#define __NR_fanotify_mark 338 -#define __NR_prlimit64 339 -#define __NR_name_to_handle_at 340 -#define __NR_open_by_handle_at 341 -#define __NR_clock_adjtime 342 -#define __NR_syncfs 343 -#define __NR_setns 344 -#define __NR_process_vm_readv 345 -#define __NR_process_vm_writev 346 +#include -#ifdef __KERNEL__ #define NR_syscalls 347 @@ -391,5 +40,4 @@ */ #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif /* __KERNEL__ */ #endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild index baebb3d..972bce1 100644 --- a/arch/m68k/include/uapi/asm/Kbuild +++ b/arch/m68k/include/uapi/asm/Kbuild @@ -1,3 +1,26 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += a.out.h +header-y += auxvec.h +header-y += byteorder.h +header-y += cachectl.h +header-y += fcntl.h +header-y += ioctls.h +header-y += msgbuf.h +header-y += param.h +header-y += poll.h +header-y += posix_types.h +header-y += ptrace.h +header-y += sembuf.h +header-y += setup.h +header-y += shmbuf.h +header-y += sigcontext.h +header-y += signal.h +header-y += socket.h +header-y += sockios.h +header-y += stat.h +header-y += swab.h +header-y += termbits.h +header-y += termios.h +header-y += unistd.h diff --git a/arch/m68k/include/uapi/asm/a.out.h b/arch/m68k/include/uapi/asm/a.out.h new file mode 100644 index 0000000..3885fe4 --- /dev/null +++ b/arch/m68k/include/uapi/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef __M68K_A_OUT_H__ +#define __M68K_A_OUT_H__ + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* __M68K_A_OUT_H__ */ diff --git a/arch/m68k/include/uapi/asm/auxvec.h b/arch/m68k/include/uapi/asm/auxvec.h new file mode 100644 index 0000000..844d6d5 --- /dev/null +++ b/arch/m68k/include/uapi/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMm68k_AUXVEC_H +#define __ASMm68k_AUXVEC_H + +#endif diff --git a/arch/m68k/include/uapi/asm/byteorder.h b/arch/m68k/include/uapi/asm/byteorder.h new file mode 100644 index 0000000..31b260a --- /dev/null +++ b/arch/m68k/include/uapi/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _M68K_BYTEORDER_H +#define _M68K_BYTEORDER_H + +#include + +#endif /* _M68K_BYTEORDER_H */ diff --git a/arch/m68k/include/uapi/asm/cachectl.h b/arch/m68k/include/uapi/asm/cachectl.h new file mode 100644 index 0000000..525978e --- /dev/null +++ b/arch/m68k/include/uapi/asm/cachectl.h @@ -0,0 +1,14 @@ +#ifndef _M68K_CACHECTL_H +#define _M68K_CACHECTL_H + +/* Definitions for the cacheflush system call. */ + +#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */ +#define FLUSH_SCOPE_PAGE 2 /* Flush a page */ +#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */ + +#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */ +#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */ +#define FLUSH_CACHE_BOTH 3 /* Flush both caches */ + +#endif /* _M68K_CACHECTL_H */ diff --git a/arch/m68k/include/uapi/asm/fcntl.h b/arch/m68k/include/uapi/asm/fcntl.h new file mode 100644 index 0000000..1c369b2 --- /dev/null +++ b/arch/m68k/include/uapi/asm/fcntl.h @@ -0,0 +1,11 @@ +#ifndef _M68K_FCNTL_H +#define _M68K_FCNTL_H + +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#include + +#endif /* _M68K_FCNTL_H */ diff --git a/arch/m68k/include/uapi/asm/ioctls.h b/arch/m68k/include/uapi/asm/ioctls.h new file mode 100644 index 0000000..1332bb4 --- /dev/null +++ b/arch/m68k/include/uapi/asm/ioctls.h @@ -0,0 +1,8 @@ +#ifndef __ARCH_M68K_IOCTLS_H__ +#define __ARCH_M68K_IOCTLS_H__ + +#define FIOQSIZE 0x545E + +#include + +#endif /* __ARCH_M68K_IOCTLS_H__ */ diff --git a/arch/m68k/include/uapi/asm/msgbuf.h b/arch/m68k/include/uapi/asm/msgbuf.h new file mode 100644 index 0000000..243cb79 --- /dev/null +++ b/arch/m68k/include/uapi/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _M68K_MSGBUF_H +#define _M68K_MSGBUF_H + +/* + * The msqid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _M68K_MSGBUF_H */ diff --git a/arch/m68k/include/uapi/asm/param.h b/arch/m68k/include/uapi/asm/param.h new file mode 100644 index 0000000..36265cc --- /dev/null +++ b/arch/m68k/include/uapi/asm/param.h @@ -0,0 +1,12 @@ +#ifndef _M68K_PARAM_H +#define _M68K_PARAM_H + +#ifdef __uClinux__ +#define EXEC_PAGESIZE 4096 +#else +#define EXEC_PAGESIZE 8192 +#endif + +#include + +#endif /* _M68K_PARAM_H */ diff --git a/arch/m68k/include/uapi/asm/poll.h b/arch/m68k/include/uapi/asm/poll.h new file mode 100644 index 0000000..f080fcd --- /dev/null +++ b/arch/m68k/include/uapi/asm/poll.h @@ -0,0 +1,9 @@ +#ifndef __m68k_POLL_H +#define __m68k_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 256 + +#include + +#endif diff --git a/arch/m68k/include/uapi/asm/posix_types.h b/arch/m68k/include/uapi/asm/posix_types.h new file mode 100644 index 0000000..cf4dbf7 --- /dev/null +++ b/arch/m68k/include/uapi/asm/posix_types.h @@ -0,0 +1,25 @@ +#ifndef __ARCH_M68K_POSIX_TYPES_H +#define __ARCH_M68K_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t + +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +#define __kernel_uid_t __kernel_uid_t + +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t + +#include + +#endif diff --git a/arch/m68k/include/uapi/asm/ptrace.h b/arch/m68k/include/uapi/asm/ptrace.h new file mode 100644 index 0000000..caf92fd --- /dev/null +++ b/arch/m68k/include/uapi/asm/ptrace.h @@ -0,0 +1,79 @@ +#ifndef _UAPI_M68K_PTRACE_H +#define _UAPI_M68K_PTRACE_H + +#define PT_D1 0 +#define PT_D2 1 +#define PT_D3 2 +#define PT_D4 3 +#define PT_D5 4 +#define PT_D6 5 +#define PT_D7 6 +#define PT_A0 7 +#define PT_A1 8 +#define PT_A2 9 +#define PT_A3 10 +#define PT_A4 11 +#define PT_A5 12 +#define PT_A6 13 +#define PT_D0 14 +#define PT_USP 15 +#define PT_ORIG_D0 16 +#define PT_SR 17 +#define PT_PC 18 + +#ifndef __ASSEMBLY__ + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long d1; + long d2; + long d3; + long d4; + long d5; + long a0; + long a1; + long a2; + long d0; + long orig_d0; + long stkadj; +#ifdef CONFIG_COLDFIRE + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ + unsigned short sr; + unsigned long pc; +#else + unsigned short sr; + unsigned long pc; + unsigned format : 4; /* frame format specifier */ + unsigned vector : 12; /* vector offset */ +#endif +}; + +/* + * This is the extended stack used by signal handlers and the context + * switcher: it's pushed after the normal "struct pt_regs". + */ +struct switch_stack { + unsigned long d6; + unsigned long d7; + unsigned long a3; + unsigned long a4; + unsigned long a5; + unsigned long a6; + unsigned long retpc; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 + +#define PTRACE_GET_THREAD_AREA 25 + +#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */ + +#endif /* __ASSEMBLY__ */ +#endif /* _UAPI_M68K_PTRACE_H */ diff --git a/arch/m68k/include/uapi/asm/sembuf.h b/arch/m68k/include/uapi/asm/sembuf.h new file mode 100644 index 0000000..2308052 --- /dev/null +++ b/arch/m68k/include/uapi/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _M68K_SEMBUF_H +#define _M68K_SEMBUF_H + +/* + * The semid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _M68K_SEMBUF_H */ diff --git a/arch/m68k/include/uapi/asm/setup.h b/arch/m68k/include/uapi/asm/setup.h new file mode 100644 index 0000000..85579bf --- /dev/null +++ b/arch/m68k/include/uapi/asm/setup.h @@ -0,0 +1,103 @@ +/* +** asm/setup.h -- Definition of the Linux/m68k setup information +** +** Copyright 1992 by Greg Harp +** +** This file is subject to the terms and conditions of the GNU General Public +** License. See the file COPYING in the main directory of this archive +** for more details. +** +** Created 09/29/92 by Greg Harp +** +** 5/2/94 Roman Hodek: +** Added bi_atari part of the machine dependent union bi_un; for now it +** contains just a model field to distinguish between TT and Falcon. +** 26/7/96 Roman Zippel: +** Renamed to setup.h; added some useful macros to allow gcc some +** optimizations if possible. +** 5/10/96 Geert Uytterhoeven: +** Redesign of the boot information structure; moved boot information +** structure to bootinfo.h +*/ + +#ifndef _UAPI_M68K_SETUP_H +#define _UAPI_M68K_SETUP_H + + + + /* + * Linux/m68k Architectures + */ + +#define MACH_AMIGA 1 +#define MACH_ATARI 2 +#define MACH_MAC 3 +#define MACH_APOLLO 4 +#define MACH_SUN3 5 +#define MACH_MVME147 6 +#define MACH_MVME16x 7 +#define MACH_BVME6000 8 +#define MACH_HP300 9 +#define MACH_Q40 10 +#define MACH_SUN3X 11 +#define MACH_M54XX 12 + +#define COMMAND_LINE_SIZE 256 + + + + /* + * CPU, FPU and MMU types + * + * Note: we may rely on the following equalities: + * + * CPU_68020 == MMU_68851 + * CPU_68030 == MMU_68030 + * CPU_68040 == FPU_68040 == MMU_68040 + * CPU_68060 == FPU_68060 == MMU_68060 + */ + +#define CPUB_68020 0 +#define CPUB_68030 1 +#define CPUB_68040 2 +#define CPUB_68060 3 +#define CPUB_COLDFIRE 4 + +#define CPU_68020 (1< + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifndef __KERNEL__ +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifndef __KERNEL__ +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#endif /* _UAPI_M68K_SIGNAL_H */ diff --git a/arch/m68k/include/uapi/asm/socket.h b/arch/m68k/include/uapi/asm/socket.h new file mode 100644 index 0000000..d1be684 --- /dev/null +++ b/arch/m68k/include/uapi/asm/socket.h @@ -0,0 +1,72 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#define SO_PROTOCOL 38 +#define SO_DOMAIN 39 + +#define SO_RXQ_OVFL 40 + +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 42 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 43 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/m68k/include/uapi/asm/sockios.h b/arch/m68k/include/uapi/asm/sockios.h new file mode 100644 index 0000000..c04a239 --- /dev/null +++ b/arch/m68k/include/uapi/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_M68K_SOCKIOS__ +#define __ARCH_M68K_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* __ARCH_M68K_SOCKIOS__ */ diff --git a/arch/m68k/include/uapi/asm/stat.h b/arch/m68k/include/uapi/asm/stat.h new file mode 100644 index 0000000..dd38bc2 --- /dev/null +++ b/arch/m68k/include/uapi/asm/stat.h @@ -0,0 +1,77 @@ +#ifndef _M68K_STAT_H +#define _M68K_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad1[2]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[2]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _M68K_STAT_H */ diff --git a/arch/m68k/include/uapi/asm/swab.h b/arch/m68k/include/uapi/asm/swab.h new file mode 100644 index 0000000..b7b37a4 --- /dev/null +++ b/arch/m68k/include/uapi/asm/swab.h @@ -0,0 +1,27 @@ +#ifndef _M68K_SWAB_H +#define _M68K_SWAB_H + +#include +#include + +#define __SWAB_64_THRU_32__ + +#if defined (__mcfisaaplus__) || defined (__mcfisac__) +static inline __attribute_const__ __u32 __arch_swab32(__u32 val) +{ + __asm__("byterev %0" : "=d" (val) : "0" (val)); + return val; +} + +#define __arch_swab32 __arch_swab32 +#elif !defined(__mcoldfire__) + +static inline __attribute_const__ __u32 __arch_swab32(__u32 val) +{ + __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); + return val; +} +#define __arch_swab32 __arch_swab32 +#endif + +#endif /* _M68K_SWAB_H */ diff --git a/arch/m68k/include/uapi/asm/termbits.h b/arch/m68k/include/uapi/asm/termbits.h new file mode 100644 index 0000000..aea1e37 --- /dev/null +++ b/arch/m68k/include/uapi/asm/termbits.h @@ -0,0 +1,201 @@ +#ifndef __ARCH_M68K_TERMBITS_H__ +#define __ARCH_M68K_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 +#define EXTPROC 0200000 + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ARCH_M68K_TERMBITS_H__ */ diff --git a/arch/m68k/include/uapi/asm/termios.h b/arch/m68k/include/uapi/asm/termios.h new file mode 100644 index 0000000..ce2142c --- /dev/null +++ b/arch/m68k/include/uapi/asm/termios.h @@ -0,0 +1,44 @@ +#ifndef _UAPI_M68K_TERMIOS_H +#define _UAPI_M68K_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + + +#endif /* _UAPI_M68K_TERMIOS_H */ diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h new file mode 100644 index 0000000..fdeb341 --- /dev/null +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -0,0 +1,356 @@ +#ifndef _UAPI_ASM_M68K_UNISTD_H_ +#define _UAPI_ASM_M68K_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +/*#define __NR_break 17*/ +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +/*#define __NR_stty 31*/ +/*#define __NR_gtty 32*/ +#define __NR_access 33 +#define __NR_nice 34 +/*#define __NR_ftime 35*/ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +/*#define __NR_prof 44*/ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +/*#define __NR_lock 53*/ +#define __NR_ioctl 54 +#define __NR_fcntl 55 +/*#define __NR_mpx 56*/ +#define __NR_setpgid 57 +/*#define __NR_ulimit 58*/ +/*#define __NR_oldolduname 59*/ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +/*#define __NR_profil 98*/ +#define __NR_statfs 99 +#define __NR_fstatfs 100 +/*#define __NR_ioperm 101*/ +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +/*#define __NR_olduname 109*/ +/*#define __NR_iopl 110*/ /* not supported */ +#define __NR_vhangup 111 +/*#define __NR_idle 112*/ /* Obsolete */ +/*#define __NR_vm86 113*/ /* not supported */ +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +/*#define __NR_afs_syscall 137*/ /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_getpagesize 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +/* 218*/ +/* 219*/ +#define __NR_getdents64 220 +#define __NR_gettid 221 +#define __NR_tkill 222 +#define __NR_setxattr 223 +#define __NR_lsetxattr 224 +#define __NR_fsetxattr 225 +#define __NR_getxattr 226 +#define __NR_lgetxattr 227 +#define __NR_fgetxattr 228 +#define __NR_listxattr 229 +#define __NR_llistxattr 230 +#define __NR_flistxattr 231 +#define __NR_removexattr 232 +#define __NR_lremovexattr 233 +#define __NR_fremovexattr 234 +#define __NR_futex 235 +#define __NR_sendfile64 236 +#define __NR_mincore 237 +#define __NR_madvise 238 +#define __NR_fcntl64 239 +#define __NR_readahead 240 +#define __NR_io_setup 241 +#define __NR_io_destroy 242 +#define __NR_io_getevents 243 +#define __NR_io_submit 244 +#define __NR_io_cancel 245 +#define __NR_fadvise64 246 +#define __NR_exit_group 247 +#define __NR_lookup_dcookie 248 +#define __NR_epoll_create 249 +#define __NR_epoll_ctl 250 +#define __NR_epoll_wait 251 +#define __NR_remap_file_pages 252 +#define __NR_set_tid_address 253 +#define __NR_timer_create 254 +#define __NR_timer_settime 255 +#define __NR_timer_gettime 256 +#define __NR_timer_getoverrun 257 +#define __NR_timer_delete 258 +#define __NR_clock_settime 259 +#define __NR_clock_gettime 260 +#define __NR_clock_getres 261 +#define __NR_clock_nanosleep 262 +#define __NR_statfs64 263 +#define __NR_fstatfs64 264 +#define __NR_tgkill 265 +#define __NR_utimes 266 +#define __NR_fadvise64_64 267 +#define __NR_mbind 268 +#define __NR_get_mempolicy 269 +#define __NR_set_mempolicy 270 +#define __NR_mq_open 271 +#define __NR_mq_unlink 272 +#define __NR_mq_timedsend 273 +#define __NR_mq_timedreceive 274 +#define __NR_mq_notify 275 +#define __NR_mq_getsetattr 276 +#define __NR_waitid 277 +/*#define __NR_vserver 278*/ +#define __NR_add_key 279 +#define __NR_request_key 280 +#define __NR_keyctl 281 +#define __NR_ioprio_set 282 +#define __NR_ioprio_get 283 +#define __NR_inotify_init 284 +#define __NR_inotify_add_watch 285 +#define __NR_inotify_rm_watch 286 +#define __NR_migrate_pages 287 +#define __NR_openat 288 +#define __NR_mkdirat 289 +#define __NR_mknodat 290 +#define __NR_fchownat 291 +#define __NR_futimesat 292 +#define __NR_fstatat64 293 +#define __NR_unlinkat 294 +#define __NR_renameat 295 +#define __NR_linkat 296 +#define __NR_symlinkat 297 +#define __NR_readlinkat 298 +#define __NR_fchmodat 299 +#define __NR_faccessat 300 +#define __NR_pselect6 301 +#define __NR_ppoll 302 +#define __NR_unshare 303 +#define __NR_set_robust_list 304 +#define __NR_get_robust_list 305 +#define __NR_splice 306 +#define __NR_sync_file_range 307 +#define __NR_tee 308 +#define __NR_vmsplice 309 +#define __NR_move_pages 310 +#define __NR_sched_setaffinity 311 +#define __NR_sched_getaffinity 312 +#define __NR_kexec_load 313 +#define __NR_getcpu 314 +#define __NR_epoll_pwait 315 +#define __NR_utimensat 316 +#define __NR_signalfd 317 +#define __NR_timerfd_create 318 +#define __NR_eventfd 319 +#define __NR_fallocate 320 +#define __NR_timerfd_settime 321 +#define __NR_timerfd_gettime 322 +#define __NR_signalfd4 323 +#define __NR_eventfd2 324 +#define __NR_epoll_create1 325 +#define __NR_dup3 326 +#define __NR_pipe2 327 +#define __NR_inotify_init1 328 +#define __NR_preadv 329 +#define __NR_pwritev 330 +#define __NR_rt_tgsigqueueinfo 331 +#define __NR_perf_event_open 332 +#define __NR_get_thread_area 333 +#define __NR_set_thread_area 334 +#define __NR_atomic_cmpxchg_32 335 +#define __NR_atomic_barrier 336 +#define __NR_fanotify_init 337 +#define __NR_fanotify_mark 338 +#define __NR_prlimit64 339 +#define __NR_name_to_handle_at 340 +#define __NR_open_by_handle_at 341 +#define __NR_clock_adjtime 342 +#define __NR_syncfs 343 +#define __NR_setns 344 +#define __NR_process_vm_readv 345 +#define __NR_process_vm_writev 346 + +#endif /* _UAPI_ASM_M68K_UNISTD_H_ */ -- cgit v0.10.2 From 0a9426df1858f71ac84eb7eef500b4247de5e3bb Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:47:37 +0100 Subject: UAPI: (Scripted) Disintegrate arch/sh/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild index 7b673dd..f734b44 100644 --- a/arch/sh/include/asm/Kbuild +++ b/arch/sh/include/asm/Kbuild @@ -1,4 +1,3 @@ -include include/asm-generic/Kbuild.asm generic-y += bitsperlong.h generic-y += cputime.h @@ -33,13 +32,3 @@ generic-y += termbits.h generic-y += termios.h generic-y += ucontext.h generic-y += xor.h - -header-y += cachectl.h -header-y += cpu-features.h -header-y += hw_breakpoint.h -header-y += posix_types_32.h -header-y += posix_types_64.h -header-y += ptrace_32.h -header-y += ptrace_64.h -header-y += unistd_32.h -header-y += unistd_64.h diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h deleted file mode 100644 index 8bcc51a..0000000 --- a/arch/sh/include/asm/auxvec.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef __ASM_SH_AUXVEC_H -#define __ASM_SH_AUXVEC_H - -/* - * Architecture-neutral AT_ values in 0-17, leave some room - * for more of them. - */ - -/* - * This entry gives some information about the FPU initialization - * performed by the kernel. - */ -#define AT_FPUCW 18 /* Used FPU control word. */ - -#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__) -/* - * Only define this in the vsyscall case, the entry point to - * the vsyscall page gets placed here. The kernel will attempt - * to build a gate VMA we don't care about otherwise.. - */ -#define AT_SYSINFO_EHDR 33 -#endif - -/* - * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the - * value is -1, then the cache doesn't exist. Otherwise: - * - * bit 0-3: Cache set-associativity; 0 means fully associative. - * bit 4-7: Log2 of cacheline size. - * bit 8-31: Size of the entire cache >> 8. - */ -#define AT_L1I_CACHESHAPE 34 -#define AT_L1D_CACHESHAPE 35 -#define AT_L2_CACHESHAPE 36 - -#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ - -#endif /* __ASM_SH_AUXVEC_H */ diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h deleted file mode 100644 index db2f5d7..0000000 --- a/arch/sh/include/asm/byteorder.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_SH_BYTEORDER_H -#define __ASM_SH_BYTEORDER_H - -#ifdef __LITTLE_ENDIAN__ -#include -#else -#include -#endif - -#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/arch/sh/include/asm/cachectl.h b/arch/sh/include/asm/cachectl.h deleted file mode 100644 index 6ffb4b7..0000000 --- a/arch/sh/include/asm/cachectl.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _SH_CACHECTL_H -#define _SH_CACHECTL_H - -/* Definitions for the cacheflush system call. */ - -#define CACHEFLUSH_D_INVAL 0x1 /* invalidate (without write back) */ -#define CACHEFLUSH_D_WB 0x2 /* write back (without invalidate) */ -#define CACHEFLUSH_D_PURGE 0x3 /* writeback and invalidate */ - -#define CACHEFLUSH_I 0x4 - -/* - * Options for cacheflush system call - */ -#define ICACHE CACHEFLUSH_I /* flush instruction cache */ -#define DCACHE CACHEFLUSH_D_PURGE /* writeback and flush data cache */ -#define BCACHE (ICACHE|DCACHE) /* flush both caches */ - -#endif /* _SH_CACHECTL_H */ diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h deleted file mode 100644 index 694abe4..0000000 --- a/arch/sh/include/asm/cpu-features.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_SH_CPU_FEATURES_H -#define __ASM_SH_CPU_FEATURES_H - -/* - * Processor flags - * - * Note: When adding a new flag, keep cpu_flags[] in - * arch/sh/kernel/setup.c in sync so symbolic name - * mapping of the processor flags has a chance of being - * reasonably accurate. - * - * These flags are also available through the ELF - * auxiliary vector as AT_HWCAP. - */ -#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ -#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ -#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ -#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ -#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ -#define CPU_HAS_PTEA 0x0020 /* PTEA register */ -#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ -#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ -#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ -#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */ - -#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/arch/sh/include/asm/hw_breakpoint.h b/arch/sh/include/asm/hw_breakpoint.h index 89890f6..ec9ad59 100644 --- a/arch/sh/include/asm/hw_breakpoint.h +++ b/arch/sh/include/asm/hw_breakpoint.h @@ -1,7 +1,8 @@ #ifndef __ASM_SH_HW_BREAKPOINT_H #define __ASM_SH_HW_BREAKPOINT_H -#ifdef __KERNEL__ +#include + #define __ARCH_HW_BREAKPOINT_H #include @@ -66,5 +67,4 @@ extern int register_sh_ubc(struct sh_ubc *); extern struct pmu perf_ops_bp; -#endif /* __KERNEL__ */ #endif /* __ASM_SH_HW_BREAKPOINT_H */ diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h deleted file mode 100644 index a6769f3..0000000 --- a/arch/sh/include/asm/ioctls.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef __ASM_SH_IOCTLS_H -#define __ASM_SH_IOCTLS_H - -#include - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 - -#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ -#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ -#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ -#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ -#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL _IO('T', 12) /* 0x540C */ -#define TIOCNXCL _IO('T', 13) /* 0x540D */ -#define TIOCSCTTY _IO('T', 14) /* 0x540E */ - -#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ -#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ -#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ -#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ -#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG - -#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ -#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ -#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ -#define TIOCCONS _IO('T', 29) /* 0x541D */ -#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ -#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ -#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 -# define TIOCPKT_IOCTL 64 - - -#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ -#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ -#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ -#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ -#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ -#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 42, struct termios2) -#define TCSETS2 _IOW('T', 43, struct termios2) -#define TCSETSW2 _IOW('T', 44, struct termios2) -#define TCSETSF2 _IOW('T', 45, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ -#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ -#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ -#define TIOCVHANGUP _IO('T', 0x37) - -#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ -#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ -#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ -#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ -#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ - -#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* __ASM_SH_IOCTLS_H */ diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h index f08449b..1aa7810 100644 --- a/arch/sh/include/asm/posix_types.h +++ b/arch/sh/include/asm/posix_types.h @@ -1,13 +1,5 @@ -#ifdef __KERNEL__ # ifdef CONFIG_SUPERH32 # include # else # include # endif -#else -# ifdef __SH5__ -# include -# else -# include -# endif -#endif /* __KERNEL__ */ diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h deleted file mode 100644 index ba0bdc4..0000000 --- a/arch/sh/include/asm/posix_types_32.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __ASM_SH_POSIX_TYPES_32_H -#define __ASM_SH_POSIX_TYPES_32_H - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t -typedef unsigned short __kernel_uid_t; -#define __kernel_uid_t __kernel_uid_t -typedef unsigned short __kernel_gid_t; -#define __kernel_gid_t __kernel_gid_t - -typedef unsigned short __kernel_old_uid_t; -#define __kernel_old_uid_t __kernel_old_uid_t -typedef unsigned short __kernel_old_gid_t; -#define __kernel_old_gid_t __kernel_old_gid_t -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif /* __ASM_SH_POSIX_TYPES_32_H */ diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h deleted file mode 100644 index 244f7e9..0000000 --- a/arch/sh/include/asm/posix_types_64.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_SH_POSIX_TYPES_64_H -#define __ASM_SH_POSIX_TYPES_64_H - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t -typedef unsigned short __kernel_uid_t; -#define __kernel_uid_t __kernel_uid_t -typedef unsigned short __kernel_gid_t; -#define __kernel_gid_t __kernel_gid_t -typedef long unsigned int __kernel_size_t; -#define __kernel_size_t __kernel_size_t -typedef int __kernel_ssize_t; -#define __kernel_ssize_t __kernel_ssize_t -typedef int __kernel_ptrdiff_t; -#define __kernel_ptrdiff_t __kernel_ptrdiff_t - -typedef unsigned short __kernel_old_uid_t; -#define __kernel_old_uid_t __kernel_old_uid_t -typedef unsigned short __kernel_old_gid_t; -#define __kernel_old_gid_t __kernel_old_gid_t -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif /* __ASM_SH_POSIX_TYPES_64_H */ diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index a4a38df..2506c7d 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -1,42 +1,16 @@ -#ifndef __ASM_SH_PTRACE_H -#define __ASM_SH_PTRACE_H - /* * Copyright (C) 1999, 2000 Niibe Yutaka */ +#ifndef __ASM_SH_PTRACE_H +#define __ASM_SH_PTRACE_H -#define PTRACE_GETREGS 12 /* General registers */ -#define PTRACE_SETREGS 13 - -#define PTRACE_GETFPREGS 14 /* FPU registers */ -#define PTRACE_SETFPREGS 15 - -#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ - -#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ -#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ - -#define PTRACE_GETDSPREGS 55 /* DSP registers */ -#define PTRACE_SETDSPREGS 56 - -#define PT_TEXT_END_ADDR 240 -#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */ -#define PT_DATA_ADDR 248 /* &(struct user)->start_data */ -#define PT_TEXT_LEN 252 - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -#include -#else -#include -#endif - -#ifdef __KERNEL__ #include #include #include #include #include +#include #define user_mode(regs) (((regs)->sr & 0x40000000)==0) #define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15]) @@ -140,6 +114,4 @@ static inline unsigned long profile_pc(struct pt_regs *regs) #define profile_pc profile_pc #include -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/asm/ptrace_32.h b/arch/sh/include/asm/ptrace_32.h index 2d3e906..1dd4480 100644 --- a/arch/sh/include/asm/ptrace_32.h +++ b/arch/sh/include/asm/ptrace_32.h @@ -1,79 +1,8 @@ #ifndef __ASM_SH_PTRACE_32_H #define __ASM_SH_PTRACE_32_H -/* - * GCC defines register number like this: - * ----------------------------- - * 0 - 15 are integer registers - * 17 - 22 are control/special registers - * 24 - 39 fp registers - * 40 - 47 xd registers - * 48 - fpscr register - * ----------------------------- - * - * We follows above, except: - * 16 --- program counter (PC) - * 22 --- syscall # - * 23 --- floating point communication register - */ -#define REG_REG0 0 -#define REG_REG15 15 +#include -#define REG_PC 16 - -#define REG_PR 17 -#define REG_SR 18 -#define REG_GBR 19 -#define REG_MACH 20 -#define REG_MACL 21 - -#define REG_SYSCALL 22 - -#define REG_FPREG0 23 -#define REG_FPREG15 38 -#define REG_XFREG0 39 -#define REG_XFREG15 54 - -#define REG_FPSCR 55 -#define REG_FPUL 56 - -/* - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_regs { - unsigned long regs[16]; - unsigned long pc; - unsigned long pr; - unsigned long sr; - unsigned long gbr; - unsigned long mach; - unsigned long macl; - long tra; -}; - -/* - * This struct defines the way the DSP registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_dspregs { - unsigned long a1; - unsigned long a0g; - unsigned long a1g; - unsigned long m0; - unsigned long m1; - unsigned long a0; - unsigned long x0; - unsigned long x1; - unsigned long y0; - unsigned long y1; - unsigned long dsr; - unsigned long rs; - unsigned long re; - unsigned long mod; -}; - -#ifdef __KERNEL__ #define MAX_REG_OFFSET offsetof(struct pt_regs, tra) static inline long regs_return_value(struct pt_regs *regs) @@ -81,6 +10,4 @@ static inline long regs_return_value(struct pt_regs *regs) return regs->regs[0]; } -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_PTRACE_32_H */ diff --git a/arch/sh/include/asm/ptrace_64.h b/arch/sh/include/asm/ptrace_64.h index eb3fcce..97f4b56 100644 --- a/arch/sh/include/asm/ptrace_64.h +++ b/arch/sh/include/asm/ptrace_64.h @@ -1,16 +1,8 @@ #ifndef __ASM_SH_PTRACE_64_H #define __ASM_SH_PTRACE_64_H -struct pt_regs { - unsigned long long pc; - unsigned long long sr; - long long syscall_nr; - unsigned long long regs[63]; - unsigned long long tregs[8]; - unsigned long long pad[2]; -}; +#include -#ifdef __KERNEL__ #define MAX_REG_OFFSET offsetof(struct pt_regs, tregs[7]) static inline long regs_return_value(struct pt_regs *regs) @@ -18,6 +10,4 @@ static inline long regs_return_value(struct pt_regs *regs) return regs->regs[3]; } -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_PTRACE_64_H */ diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h index 465a22d..9923810 100644 --- a/arch/sh/include/asm/setup.h +++ b/arch/sh/include/asm/setup.h @@ -1,9 +1,8 @@ #ifndef _SH_SETUP_H #define _SH_SETUP_H -#include +#include -#ifdef __KERNEL__ /* * This is set up by the setup-routine at boot-time */ @@ -22,6 +21,4 @@ void sh_mv_setup(void); void check_for_initrd(void); void per_cpu_trap_init(void); -#endif /* __KERNEL__ */ - #endif /* _SH_SETUP_H */ diff --git a/arch/sh/include/asm/sigcontext.h b/arch/sh/include/asm/sigcontext.h deleted file mode 100644 index 8ce1435..0000000 --- a/arch/sh/include/asm/sigcontext.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH_SIGCONTEXT_H -#define __ASM_SH_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) - /* CPU registers */ - unsigned long long sc_regs[63]; - unsigned long long sc_tregs[8]; - unsigned long long sc_pc; - unsigned long long sc_sr; - - /* FPU registers */ - unsigned long long sc_fpregs[32]; - unsigned int sc_fpscr; - unsigned int sc_fpvalid; -#else - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; - -#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ - defined(__SH2A__) || defined(CONFIG_CPU_SH2A) - /* FPU registers */ - unsigned long sc_fpregs[16]; - unsigned long sc_xfpregs[16]; - unsigned int sc_fpscr; - unsigned int sc_fpul; - unsigned int sc_ownedfp; -#endif -#endif -}; - -#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h deleted file mode 100644 index 9ac530a..0000000 --- a/arch/sh/include/asm/signal.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_SH_SIGNAL_H -#define __ASM_SH_SIGNAL_H - -#define SA_RESTORER 0x04000000 - -#include - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#endif /* __ASM_SH_SIGNAL_H */ diff --git a/arch/sh/include/asm/sockios.h b/arch/sh/include/asm/sockios.h deleted file mode 100644 index cf8b96b..0000000 --- a/arch/sh/include/asm/sockios.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __ASM_SH_SOCKIOS_H -#define __ASM_SH_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ -#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ -#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/arch/sh/include/asm/stat.h b/arch/sh/include/asm/stat.h deleted file mode 100644 index e1810cc..0000000 --- a/arch/sh/include/asm/stat.h +++ /dev/null @@ -1,138 +0,0 @@ -#ifndef __ASM_SH_STAT_H -#define __ASM_SH_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned short st_dev; - unsigned char __pad0[10]; - - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned short st_rdev; - unsigned char __pad3[10]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ - - unsigned long __unused1; - unsigned long __unused2; -}; -#else -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#define STAT_HAVE_NSEC 1 -#endif - -#endif /* __ASM_SH_STAT_H */ diff --git a/arch/sh/include/asm/swab.h b/arch/sh/include/asm/swab.h deleted file mode 100644 index 1cd0976..0000000 --- a/arch/sh/include/asm/swab.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __ASM_SH_SWAB_H -#define __ASM_SH_SWAB_H - -/* - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2000, 2001 Paolo Alberelli - */ -#include -#include -#include - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - __asm__( -#ifdef __SH5__ - "byterev %1, %0\n\t" - "shari %0, 32, %0" -#else - "swap.b %1, %0\n\t" - "swap.w %0, %0\n\t" - "swap.b %0, %0" -#endif - : "=r" (x) - : "r" (x)); - - return x; -} -#define __arch_swab32 __arch_swab32 - -static inline __attribute_const__ __u16 __arch_swab16(__u16 x) -{ - __asm__( -#ifdef __SH5__ - "byterev %1, %0\n\t" - "shari %0, 32, %0" -#else - "swap.b %1, %0" -#endif - : "=r" (x) - : "r" (x)); - - return x; -} -#define __arch_swab16 __arch_swab16 - -static inline __u64 __arch_swab64(__u64 val) -{ - union { - struct { __u32 a,b; } s; - __u64 u; - } v, w; - v.u = val; - w.s.b = __arch_swab32(v.s.a); - w.s.a = __arch_swab32(v.s.b); - return w.u; -} -#define __arch_swab64 __arch_swab64 - -#endif /* __ASM_SH_SWAB_H */ diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h index f8421f7..6a31053 100644 --- a/arch/sh/include/asm/types.h +++ b/arch/sh/include/asm/types.h @@ -1,12 +1,11 @@ #ifndef __ASM_SH_TYPES_H #define __ASM_SH_TYPES_H -#include +#include /* * These aren't exported outside the kernel to avoid name space clashes */ -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ #ifdef CONFIG_SUPERH32 @@ -18,6 +17,4 @@ typedef u64 reg_size_t; #endif #endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_TYPES_H */ diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h index 307201a..38956df 100644 --- a/arch/sh/include/asm/unistd.h +++ b/arch/sh/include/asm/unistd.h @@ -1,4 +1,3 @@ -#ifdef __KERNEL__ # ifdef CONFIG_SUPERH32 # include # else @@ -38,10 +37,4 @@ */ # define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#else -# ifdef __SH5__ -# include -# else -# include -# endif -#endif +#include diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h deleted file mode 100644 index 72fd1e0..0000000 --- a/arch/sh/include/asm/unistd_32.h +++ /dev/null @@ -1,384 +0,0 @@ -#ifndef __ASM_SH_UNISTD_32_H -#define __ASM_SH_UNISTD_32_H - -/* - * Copyright (C) 1999 Niibe Yutaka - */ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 - /* 17 was sys_break */ -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access 33 -#define __NR_nice 34 - /* 35 was sys_ftime */ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 - /* 44 was sys_prof */ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 - /* 53 was sys_lock */ -#define __NR_ioctl 54 -#define __NR_fcntl 55 - /* 56 was sys_mpx */ -#define __NR_setpgid 57 - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 - /* 82 was sys_oldselect */ -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 - /* 98 was sys_profil */ -#define __NR_statfs 99 -#define __NR_fstatfs 100 - /* 101 was sys_ioperm */ -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 - /* 110 was sys_iopl */ -#define __NR_vhangup 111 - /* 112 was sys_idle */ - /* 113 was sys_vm86old */ -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 - /* 127 was sys_create_module */ -#define __NR_init_module 128 -#define __NR_delete_module 129 - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 - /* 188 reserved for sys_getpmsg */ - /* 189 reserved for sys_putpmsg */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_getdents64 220 -#define __NR_fcntl64 221 - /* 222 is reserved for tux */ - /* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 - /* 243 is reserved for set_thread_area */ - /* 244 is reserved for get_thread_area */ -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - /* 251 is unused */ -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 - /* 273 is reserved for vserver */ -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -#define __NR_add_key 285 -#define __NR_request_key 286 -#define __NR_keyctl 287 -#define __NR_ioprio_set 288 -#define __NR_ioprio_get 289 -#define __NR_inotify_init 290 -#define __NR_inotify_add_watch 291 -#define __NR_inotify_rm_watch 292 - /* 293 is unused */ -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -#define __NR_timerfd_create 322 -#define __NR_eventfd 323 -#define __NR_fallocate 324 -#define __NR_timerfd_settime 325 -#define __NR_timerfd_gettime 326 -#define __NR_signalfd4 327 -#define __NR_eventfd2 328 -#define __NR_epoll_create1 329 -#define __NR_dup3 330 -#define __NR_pipe2 331 -#define __NR_inotify_init1 332 -#define __NR_preadv 333 -#define __NR_pwritev 334 -#define __NR_rt_tgsigqueueinfo 335 -#define __NR_perf_event_open 336 -#define __NR_fanotify_init 337 -#define __NR_fanotify_mark 338 -#define __NR_prlimit64 339 - -/* Non-multiplexed socket family */ -#define __NR_socket 340 -#define __NR_bind 341 -#define __NR_connect 342 -#define __NR_listen 343 -#define __NR_accept 344 -#define __NR_getsockname 345 -#define __NR_getpeername 346 -#define __NR_socketpair 347 -#define __NR_send 348 -#define __NR_sendto 349 -#define __NR_recv 350 -#define __NR_recvfrom 351 -#define __NR_shutdown 352 -#define __NR_setsockopt 353 -#define __NR_getsockopt 354 -#define __NR_sendmsg 355 -#define __NR_recvmsg 356 -#define __NR_recvmmsg 357 -#define __NR_accept4 358 -#define __NR_name_to_handle_at 359 -#define __NR_open_by_handle_at 360 -#define __NR_clock_adjtime 361 -#define __NR_syncfs 362 -#define __NR_sendmmsg 363 -#define __NR_setns 364 -#define __NR_process_vm_readv 365 -#define __NR_process_vm_writev 366 - -#define NR_syscalls 367 - -#endif /* __ASM_SH_UNISTD_32_H */ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h deleted file mode 100644 index a28edc3..0000000 --- a/arch/sh/include/asm/unistd_64.h +++ /dev/null @@ -1,404 +0,0 @@ -#ifndef __ASM_SH_UNISTD_64_H -#define __ASM_SH_UNISTD_64_H - -/* - * include/asm-sh/unistd_64.h - * - * This file contains the system call numbers. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * Copyright (C) 2004 Sean McGoogan - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 - /* 17 was sys_break */ -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access 33 -#define __NR_nice 34 - /* 35 was sys_ftime */ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 - /* 44 was sys_prof */ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 - /* 53 was sys_lock */ -#define __NR_ioctl 54 -#define __NR_fcntl 55 - /* 56 was sys_mpx */ -#define __NR_setpgid 57 - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 - /* 82 was sys_select */ -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 - /* 98 was sys_profil */ -#define __NR_statfs 99 -#define __NR_fstatfs 100 - /* 101 was sys_ioperm */ -#define __NR_socketcall 102 /* old implementation of socket systemcall */ -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 - /* 110 was sys_iopl */ -#define __NR_vhangup 111 - /* 112 was sys_idle */ - /* 113 was sys_vm86old */ -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 - /* 127 was sys_create_module */ -#define __NR_init_module 128 -#define __NR_delete_module 129 - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 - /* 188 reserved for getpmsg */ - /* 189 reserved for putpmsg */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 - -/* Non-multiplexed socket family */ -#define __NR_socket 220 -#define __NR_bind 221 -#define __NR_connect 222 -#define __NR_listen 223 -#define __NR_accept 224 -#define __NR_getsockname 225 -#define __NR_getpeername 226 -#define __NR_socketpair 227 -#define __NR_send 228 -#define __NR_sendto 229 -#define __NR_recv 230 -#define __NR_recvfrom 231 -#define __NR_shutdown 232 -#define __NR_setsockopt 233 -#define __NR_getsockopt 234 -#define __NR_sendmsg 235 -#define __NR_recvmsg 236 - -/* Non-multiplexed IPC family */ -#define __NR_semop 237 -#define __NR_semget 238 -#define __NR_semctl 239 -#define __NR_msgsnd 240 -#define __NR_msgrcv 241 -#define __NR_msgget 242 -#define __NR_msgctl 243 -#define __NR_shmat 244 -#define __NR_shmdt 245 -#define __NR_shmget 246 -#define __NR_shmctl 247 - -#define __NR_getdents64 248 -#define __NR_fcntl64 249 - /* 250 is reserved for tux */ - /* 251 is unused */ -#define __NR_gettid 252 -#define __NR_readahead 253 -#define __NR_setxattr 254 -#define __NR_lsetxattr 255 -#define __NR_fsetxattr 256 -#define __NR_getxattr 257 -#define __NR_lgetxattr 258 -#define __NR_fgetxattr 269 -#define __NR_listxattr 260 -#define __NR_llistxattr 261 -#define __NR_flistxattr 262 -#define __NR_removexattr 263 -#define __NR_lremovexattr 264 -#define __NR_fremovexattr 265 -#define __NR_tkill 266 -#define __NR_sendfile64 267 -#define __NR_futex 268 -#define __NR_sched_setaffinity 269 -#define __NR_sched_getaffinity 270 - /* 271 is reserved for set_thread_area */ - /* 272 is reserved for get_thread_area */ -#define __NR_io_setup 273 -#define __NR_io_destroy 274 -#define __NR_io_getevents 275 -#define __NR_io_submit 276 -#define __NR_io_cancel 277 -#define __NR_fadvise64 278 - /* 279 is unused */ -#define __NR_exit_group 280 - -#define __NR_lookup_dcookie 281 -#define __NR_epoll_create 282 -#define __NR_epoll_ctl 283 -#define __NR_epoll_wait 284 -#define __NR_remap_file_pages 285 -#define __NR_set_tid_address 286 -#define __NR_timer_create 287 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 296 -#define __NR_fstatfs64 297 -#define __NR_tgkill 298 -#define __NR_utimes 299 -#define __NR_fadvise64_64 300 - /* 301 is reserved for vserver */ - /* 302 is reserved for mbind */ - /* 303 is reserved for get_mempolicy */ - /* 304 is reserved for set_mempolicy */ -#define __NR_mq_open 305 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) - /* 311 is reserved for kexec */ -#define __NR_waitid 312 -#define __NR_add_key 313 -#define __NR_request_key 314 -#define __NR_keyctl 315 -#define __NR_ioprio_set 316 -#define __NR_ioprio_get 317 -#define __NR_inotify_init 318 -#define __NR_inotify_add_watch 319 -#define __NR_inotify_rm_watch 320 - /* 321 is unused */ -#define __NR_migrate_pages 322 -#define __NR_openat 323 -#define __NR_mkdirat 324 -#define __NR_mknodat 325 -#define __NR_fchownat 326 -#define __NR_futimesat 327 -#define __NR_fstatat64 328 -#define __NR_unlinkat 329 -#define __NR_renameat 330 -#define __NR_linkat 331 -#define __NR_symlinkat 332 -#define __NR_readlinkat 333 -#define __NR_fchmodat 334 -#define __NR_faccessat 335 -#define __NR_pselect6 336 -#define __NR_ppoll 337 -#define __NR_unshare 338 -#define __NR_set_robust_list 339 -#define __NR_get_robust_list 340 -#define __NR_splice 341 -#define __NR_sync_file_range 342 -#define __NR_tee 343 -#define __NR_vmsplice 344 -#define __NR_move_pages 345 -#define __NR_getcpu 346 -#define __NR_epoll_pwait 347 -#define __NR_utimensat 348 -#define __NR_signalfd 349 -#define __NR_timerfd_create 350 -#define __NR_eventfd 351 -#define __NR_fallocate 352 -#define __NR_timerfd_settime 353 -#define __NR_timerfd_gettime 354 -#define __NR_signalfd4 355 -#define __NR_eventfd2 356 -#define __NR_epoll_create1 357 -#define __NR_dup3 358 -#define __NR_pipe2 359 -#define __NR_inotify_init1 360 -#define __NR_preadv 361 -#define __NR_pwritev 362 -#define __NR_rt_tgsigqueueinfo 363 -#define __NR_perf_event_open 364 -#define __NR_recvmmsg 365 -#define __NR_accept4 366 -#define __NR_fanotify_init 367 -#define __NR_fanotify_mark 368 -#define __NR_prlimit64 369 -#define __NR_name_to_handle_at 370 -#define __NR_open_by_handle_at 371 -#define __NR_clock_adjtime 372 -#define __NR_syncfs 373 -#define __NR_sendmmsg 374 -#define __NR_setns 375 -#define __NR_process_vm_readv 376 -#define __NR_process_vm_writev 377 - -#define NR_syscalls 378 - -#endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild index baebb3d..60613ae 100644 --- a/arch/sh/include/uapi/asm/Kbuild +++ b/arch/sh/include/uapi/asm/Kbuild @@ -1,3 +1,25 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += auxvec.h +header-y += byteorder.h +header-y += cachectl.h +header-y += cpu-features.h +header-y += hw_breakpoint.h +header-y += ioctls.h +header-y += posix_types.h +header-y += posix_types_32.h +header-y += posix_types_64.h +header-y += ptrace.h +header-y += ptrace_32.h +header-y += ptrace_64.h +header-y += setup.h +header-y += sigcontext.h +header-y += signal.h +header-y += sockios.h +header-y += stat.h +header-y += swab.h +header-y += types.h +header-y += unistd.h +header-y += unistd_32.h +header-y += unistd_64.h diff --git a/arch/sh/include/uapi/asm/auxvec.h b/arch/sh/include/uapi/asm/auxvec.h new file mode 100644 index 0000000..8bcc51a --- /dev/null +++ b/arch/sh/include/uapi/asm/auxvec.h @@ -0,0 +1,38 @@ +#ifndef __ASM_SH_AUXVEC_H +#define __ASM_SH_AUXVEC_H + +/* + * Architecture-neutral AT_ values in 0-17, leave some room + * for more of them. + */ + +/* + * This entry gives some information about the FPU initialization + * performed by the kernel. + */ +#define AT_FPUCW 18 /* Used FPU control word. */ + +#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__) +/* + * Only define this in the vsyscall case, the entry point to + * the vsyscall page gets placed here. The kernel will attempt + * to build a gate VMA we don't care about otherwise.. + */ +#define AT_SYSINFO_EHDR 33 +#endif + +/* + * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the + * value is -1, then the cache doesn't exist. Otherwise: + * + * bit 0-3: Cache set-associativity; 0 means fully associative. + * bit 4-7: Log2 of cacheline size. + * bit 8-31: Size of the entire cache >> 8. + */ +#define AT_L1I_CACHESHAPE 34 +#define AT_L1D_CACHESHAPE 35 +#define AT_L2_CACHESHAPE 36 + +#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ + +#endif /* __ASM_SH_AUXVEC_H */ diff --git a/arch/sh/include/uapi/asm/byteorder.h b/arch/sh/include/uapi/asm/byteorder.h new file mode 100644 index 0000000..db2f5d7 --- /dev/null +++ b/arch/sh/include/uapi/asm/byteorder.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SH_BYTEORDER_H +#define __ASM_SH_BYTEORDER_H + +#ifdef __LITTLE_ENDIAN__ +#include +#else +#include +#endif + +#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/arch/sh/include/uapi/asm/cachectl.h b/arch/sh/include/uapi/asm/cachectl.h new file mode 100644 index 0000000..6ffb4b7 --- /dev/null +++ b/arch/sh/include/uapi/asm/cachectl.h @@ -0,0 +1,19 @@ +#ifndef _SH_CACHECTL_H +#define _SH_CACHECTL_H + +/* Definitions for the cacheflush system call. */ + +#define CACHEFLUSH_D_INVAL 0x1 /* invalidate (without write back) */ +#define CACHEFLUSH_D_WB 0x2 /* write back (without invalidate) */ +#define CACHEFLUSH_D_PURGE 0x3 /* writeback and invalidate */ + +#define CACHEFLUSH_I 0x4 + +/* + * Options for cacheflush system call + */ +#define ICACHE CACHEFLUSH_I /* flush instruction cache */ +#define DCACHE CACHEFLUSH_D_PURGE /* writeback and flush data cache */ +#define BCACHE (ICACHE|DCACHE) /* flush both caches */ + +#endif /* _SH_CACHECTL_H */ diff --git a/arch/sh/include/uapi/asm/cpu-features.h b/arch/sh/include/uapi/asm/cpu-features.h new file mode 100644 index 0000000..694abe4 --- /dev/null +++ b/arch/sh/include/uapi/asm/cpu-features.h @@ -0,0 +1,26 @@ +#ifndef __ASM_SH_CPU_FEATURES_H +#define __ASM_SH_CPU_FEATURES_H + +/* + * Processor flags + * + * Note: When adding a new flag, keep cpu_flags[] in + * arch/sh/kernel/setup.c in sync so symbolic name + * mapping of the processor flags has a chance of being + * reasonably accurate. + * + * These flags are also available through the ELF + * auxiliary vector as AT_HWCAP. + */ +#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ +#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ +#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ +#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ +#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ +#define CPU_HAS_PTEA 0x0020 /* PTEA register */ +#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ +#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ +#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ +#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */ + +#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/arch/sh/include/uapi/asm/hw_breakpoint.h b/arch/sh/include/uapi/asm/hw_breakpoint.h new file mode 100644 index 0000000..e69de29 diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h new file mode 100644 index 0000000..a6769f3 --- /dev/null +++ b/arch/sh/include/uapi/asm/ioctls.h @@ -0,0 +1,107 @@ +#ifndef __ASM_SH_IOCTLS_H +#define __ASM_SH_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 + +#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ +#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ +#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ +#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ +#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL _IO('T', 12) /* 0x540C */ +#define TIOCNXCL _IO('T', 13) /* 0x540D */ +#define TIOCSCTTY _IO('T', 14) /* 0x540E */ + +#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ +#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ +#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ +#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ +#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG + +#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ +#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ +#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ +#define TIOCCONS _IO('T', 29) /* 0x541D */ +#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ +#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ +#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 +# define TIOCPKT_IOCTL 64 + + +#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ +#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ +#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ +#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ +#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ +#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP _IO('T', 0x37) + +#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ +#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ +#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ +#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ +#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ + +#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* __ASM_SH_IOCTLS_H */ diff --git a/arch/sh/include/uapi/asm/posix_types.h b/arch/sh/include/uapi/asm/posix_types.h new file mode 100644 index 0000000..dc55e5a --- /dev/null +++ b/arch/sh/include/uapi/asm/posix_types.h @@ -0,0 +1,7 @@ +#ifndef __KERNEL__ +# ifdef __SH5__ +# include +# else +# include +# endif +#endif /* __KERNEL__ */ diff --git a/arch/sh/include/uapi/asm/posix_types_32.h b/arch/sh/include/uapi/asm/posix_types_32.h new file mode 100644 index 0000000..ba0bdc4 --- /dev/null +++ b/arch/sh/include/uapi/asm/posix_types_32.h @@ -0,0 +1,22 @@ +#ifndef __ASM_SH_POSIX_TYPES_32_H +#define __ASM_SH_POSIX_TYPES_32_H + +typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t +typedef unsigned short __kernel_uid_t; +#define __kernel_uid_t __kernel_uid_t +typedef unsigned short __kernel_gid_t; +#define __kernel_gid_t __kernel_gid_t + +typedef unsigned short __kernel_old_uid_t; +#define __kernel_old_uid_t __kernel_old_uid_t +typedef unsigned short __kernel_old_gid_t; +#define __kernel_old_gid_t __kernel_old_gid_t +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t + +#include + +#endif /* __ASM_SH_POSIX_TYPES_32_H */ diff --git a/arch/sh/include/uapi/asm/posix_types_64.h b/arch/sh/include/uapi/asm/posix_types_64.h new file mode 100644 index 0000000..244f7e9 --- /dev/null +++ b/arch/sh/include/uapi/asm/posix_types_64.h @@ -0,0 +1,28 @@ +#ifndef __ASM_SH_POSIX_TYPES_64_H +#define __ASM_SH_POSIX_TYPES_64_H + +typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t +typedef unsigned short __kernel_uid_t; +#define __kernel_uid_t __kernel_uid_t +typedef unsigned short __kernel_gid_t; +#define __kernel_gid_t __kernel_gid_t +typedef long unsigned int __kernel_size_t; +#define __kernel_size_t __kernel_size_t +typedef int __kernel_ssize_t; +#define __kernel_ssize_t __kernel_ssize_t +typedef int __kernel_ptrdiff_t; +#define __kernel_ptrdiff_t __kernel_ptrdiff_t + +typedef unsigned short __kernel_old_uid_t; +#define __kernel_old_uid_t __kernel_old_uid_t +typedef unsigned short __kernel_old_gid_t; +#define __kernel_old_gid_t __kernel_old_gid_t +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t + +#include + +#endif /* __ASM_SH_POSIX_TYPES_64_H */ diff --git a/arch/sh/include/uapi/asm/ptrace.h b/arch/sh/include/uapi/asm/ptrace.h new file mode 100644 index 0000000..8b8c5ac --- /dev/null +++ b/arch/sh/include/uapi/asm/ptrace.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 1999, 2000 Niibe Yutaka + */ +#ifndef _UAPI__ASM_SH_PTRACE_H +#define _UAPI__ASM_SH_PTRACE_H + + +#define PTRACE_GETREGS 12 /* General registers */ +#define PTRACE_SETREGS 13 + +#define PTRACE_GETFPREGS 14 /* FPU registers */ +#define PTRACE_SETFPREGS 15 + +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#define PTRACE_GETDSPREGS 55 /* DSP registers */ +#define PTRACE_SETDSPREGS 56 + +#define PT_TEXT_END_ADDR 240 +#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */ +#define PT_DATA_ADDR 248 /* &(struct user)->start_data */ +#define PT_TEXT_LEN 252 + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +#include +#else +#include +#endif + + +#endif /* _UAPI__ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/uapi/asm/ptrace_32.h b/arch/sh/include/uapi/asm/ptrace_32.h new file mode 100644 index 0000000..926e0ce --- /dev/null +++ b/arch/sh/include/uapi/asm/ptrace_32.h @@ -0,0 +1,77 @@ +#ifndef _UAPI__ASM_SH_PTRACE_32_H +#define _UAPI__ASM_SH_PTRACE_32_H + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 15 are integer registers + * 17 - 22 are control/special registers + * 24 - 39 fp registers + * 40 - 47 xd registers + * 48 - fpscr register + * ----------------------------- + * + * We follows above, except: + * 16 --- program counter (PC) + * 22 --- syscall # + * 23 --- floating point communication register + */ +#define REG_REG0 0 +#define REG_REG15 15 + +#define REG_PC 16 + +#define REG_PR 17 +#define REG_SR 18 +#define REG_GBR 19 +#define REG_MACH 20 +#define REG_MACL 21 + +#define REG_SYSCALL 22 + +#define REG_FPREG0 23 +#define REG_FPREG15 38 +#define REG_XFREG0 39 +#define REG_XFREG15 54 + +#define REG_FPSCR 55 +#define REG_FPUL 56 + +/* + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + long tra; +}; + +/* + * This struct defines the way the DSP registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_dspregs { + unsigned long a1; + unsigned long a0g; + unsigned long a1g; + unsigned long m0; + unsigned long m1; + unsigned long a0; + unsigned long x0; + unsigned long x1; + unsigned long y0; + unsigned long y1; + unsigned long dsr; + unsigned long rs; + unsigned long re; + unsigned long mod; +}; + + +#endif /* _UAPI__ASM_SH_PTRACE_32_H */ diff --git a/arch/sh/include/uapi/asm/ptrace_64.h b/arch/sh/include/uapi/asm/ptrace_64.h new file mode 100644 index 0000000..0e52ee8 --- /dev/null +++ b/arch/sh/include/uapi/asm/ptrace_64.h @@ -0,0 +1,14 @@ +#ifndef _UAPI__ASM_SH_PTRACE_64_H +#define _UAPI__ASM_SH_PTRACE_64_H + +struct pt_regs { + unsigned long long pc; + unsigned long long sr; + long long syscall_nr; + unsigned long long regs[63]; + unsigned long long tregs[8]; + unsigned long long pad[2]; +}; + + +#endif /* _UAPI__ASM_SH_PTRACE_64_H */ diff --git a/arch/sh/include/uapi/asm/setup.h b/arch/sh/include/uapi/asm/setup.h new file mode 100644 index 0000000..552df83 --- /dev/null +++ b/arch/sh/include/uapi/asm/setup.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/uapi/asm/sigcontext.h b/arch/sh/include/uapi/asm/sigcontext.h new file mode 100644 index 0000000..8ce1435 --- /dev/null +++ b/arch/sh/include/uapi/asm/sigcontext.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_SIGCONTEXT_H +#define __ASM_SH_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) + /* CPU registers */ + unsigned long long sc_regs[63]; + unsigned long long sc_tregs[8]; + unsigned long long sc_pc; + unsigned long long sc_sr; + + /* FPU registers */ + unsigned long long sc_fpregs[32]; + unsigned int sc_fpscr; + unsigned int sc_fpvalid; +#else + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; + +#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ + defined(__SH2A__) || defined(CONFIG_CPU_SH2A) + /* FPU registers */ + unsigned long sc_fpregs[16]; + unsigned long sc_xfpregs[16]; + unsigned int sc_fpscr; + unsigned int sc_fpul; + unsigned int sc_ownedfp; +#endif +#endif +}; + +#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/arch/sh/include/uapi/asm/signal.h b/arch/sh/include/uapi/asm/signal.h new file mode 100644 index 0000000..9ac530a --- /dev/null +++ b/arch/sh/include/uapi/asm/signal.h @@ -0,0 +1,15 @@ +#ifndef __ASM_SH_SIGNAL_H +#define __ASM_SH_SIGNAL_H + +#define SA_RESTORER 0x04000000 + +#include + +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#endif /* __ASM_SH_SIGNAL_H */ diff --git a/arch/sh/include/uapi/asm/sockios.h b/arch/sh/include/uapi/asm/sockios.h new file mode 100644 index 0000000..cf8b96b --- /dev/null +++ b/arch/sh/include/uapi/asm/sockios.h @@ -0,0 +1,14 @@ +#ifndef __ASM_SH_SOCKIOS_H +#define __ASM_SH_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ +#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ +#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/arch/sh/include/uapi/asm/stat.h b/arch/sh/include/uapi/asm/stat.h new file mode 100644 index 0000000..e1810cc --- /dev/null +++ b/arch/sh/include/uapi/asm/stat.h @@ -0,0 +1,138 @@ +#ifndef __ASM_SH_STAT_H +#define __ASM_SH_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned short st_dev; + unsigned char __pad0[10]; + + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned short st_rdev; + unsigned char __pad3[10]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ + + unsigned long __unused1; + unsigned long __unused2; +}; +#else +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#define STAT_HAVE_NSEC 1 +#endif + +#endif /* __ASM_SH_STAT_H */ diff --git a/arch/sh/include/uapi/asm/swab.h b/arch/sh/include/uapi/asm/swab.h new file mode 100644 index 0000000..1cd0976 --- /dev/null +++ b/arch/sh/include/uapi/asm/swab.h @@ -0,0 +1,59 @@ +#ifndef __ASM_SH_SWAB_H +#define __ASM_SH_SWAB_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000, 2001 Paolo Alberelli + */ +#include +#include +#include + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %1, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %1, %0\n\t" + "swap.w %0, %0\n\t" + "swap.b %0, %0" +#endif + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch_swab32 __arch_swab32 + +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %1, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %1, %0" +#endif + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch_swab16 __arch_swab16 + +static inline __u64 __arch_swab64(__u64 val) +{ + union { + struct { __u32 a,b; } s; + __u64 u; + } v, w; + v.u = val; + w.s.b = __arch_swab32(v.s.a); + w.s.a = __arch_swab32(v.s.b); + return w.u; +} +#define __arch_swab64 __arch_swab64 + +#endif /* __ASM_SH_SWAB_H */ diff --git a/arch/sh/include/uapi/asm/types.h b/arch/sh/include/uapi/asm/types.h new file mode 100644 index 0000000..b9e79bc --- /dev/null +++ b/arch/sh/include/uapi/asm/types.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/uapi/asm/unistd.h b/arch/sh/include/uapi/asm/unistd.h new file mode 100644 index 0000000..eeef88d --- /dev/null +++ b/arch/sh/include/uapi/asm/unistd.h @@ -0,0 +1,7 @@ +#ifndef __KERNEL__ +# ifdef __SH5__ +# include +# else +# include +# endif +#endif diff --git a/arch/sh/include/uapi/asm/unistd_32.h b/arch/sh/include/uapi/asm/unistd_32.h new file mode 100644 index 0000000..72fd1e0 --- /dev/null +++ b/arch/sh/include/uapi/asm/unistd_32.h @@ -0,0 +1,384 @@ +#ifndef __ASM_SH_UNISTD_32_H +#define __ASM_SH_UNISTD_32_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 + /* 17 was sys_break */ +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access 33 +#define __NR_nice 34 + /* 35 was sys_ftime */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 + /* 44 was sys_prof */ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 + /* 53 was sys_lock */ +#define __NR_ioctl 54 +#define __NR_fcntl 55 + /* 56 was sys_mpx */ +#define __NR_setpgid 57 + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 + /* 82 was sys_oldselect */ +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 + /* 98 was sys_profil */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 + /* 101 was sys_ioperm */ +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 + /* 110 was sys_iopl */ +#define __NR_vhangup 111 + /* 112 was sys_idle */ + /* 113 was sys_vm86old */ +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 + /* 127 was sys_create_module */ +#define __NR_init_module 128 +#define __NR_delete_module 129 + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 + /* 188 reserved for sys_getpmsg */ + /* 189 reserved for sys_putpmsg */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 + /* 222 is reserved for tux */ + /* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 + /* 243 is reserved for set_thread_area */ + /* 244 is reserved for get_thread_area */ +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + /* 251 is unused */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 + /* 273 is reserved for vserver */ +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +#define __NR_add_key 285 +#define __NR_request_key 286 +#define __NR_keyctl 287 +#define __NR_ioprio_set 288 +#define __NR_ioprio_get 289 +#define __NR_inotify_init 290 +#define __NR_inotify_add_watch 291 +#define __NR_inotify_rm_watch 292 + /* 293 is unused */ +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd_create 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 +#define __NR_timerfd_settime 325 +#define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 +#define __NR_rt_tgsigqueueinfo 335 +#define __NR_perf_event_open 336 +#define __NR_fanotify_init 337 +#define __NR_fanotify_mark 338 +#define __NR_prlimit64 339 + +/* Non-multiplexed socket family */ +#define __NR_socket 340 +#define __NR_bind 341 +#define __NR_connect 342 +#define __NR_listen 343 +#define __NR_accept 344 +#define __NR_getsockname 345 +#define __NR_getpeername 346 +#define __NR_socketpair 347 +#define __NR_send 348 +#define __NR_sendto 349 +#define __NR_recv 350 +#define __NR_recvfrom 351 +#define __NR_shutdown 352 +#define __NR_setsockopt 353 +#define __NR_getsockopt 354 +#define __NR_sendmsg 355 +#define __NR_recvmsg 356 +#define __NR_recvmmsg 357 +#define __NR_accept4 358 +#define __NR_name_to_handle_at 359 +#define __NR_open_by_handle_at 360 +#define __NR_clock_adjtime 361 +#define __NR_syncfs 362 +#define __NR_sendmmsg 363 +#define __NR_setns 364 +#define __NR_process_vm_readv 365 +#define __NR_process_vm_writev 366 + +#define NR_syscalls 367 + +#endif /* __ASM_SH_UNISTD_32_H */ diff --git a/arch/sh/include/uapi/asm/unistd_64.h b/arch/sh/include/uapi/asm/unistd_64.h new file mode 100644 index 0000000..a28edc3 --- /dev/null +++ b/arch/sh/include/uapi/asm/unistd_64.h @@ -0,0 +1,404 @@ +#ifndef __ASM_SH_UNISTD_64_H +#define __ASM_SH_UNISTD_64_H + +/* + * include/asm-sh/unistd_64.h + * + * This file contains the system call numbers. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * Copyright (C) 2004 Sean McGoogan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 + /* 17 was sys_break */ +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access 33 +#define __NR_nice 34 + /* 35 was sys_ftime */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 + /* 44 was sys_prof */ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 + /* 53 was sys_lock */ +#define __NR_ioctl 54 +#define __NR_fcntl 55 + /* 56 was sys_mpx */ +#define __NR_setpgid 57 + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 + /* 82 was sys_select */ +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 + /* 98 was sys_profil */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 + /* 101 was sys_ioperm */ +#define __NR_socketcall 102 /* old implementation of socket systemcall */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 + /* 110 was sys_iopl */ +#define __NR_vhangup 111 + /* 112 was sys_idle */ + /* 113 was sys_vm86old */ +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 + /* 127 was sys_create_module */ +#define __NR_init_module 128 +#define __NR_delete_module 129 + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 + /* 188 reserved for getpmsg */ + /* 189 reserved for putpmsg */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 + +/* Non-multiplexed socket family */ +#define __NR_socket 220 +#define __NR_bind 221 +#define __NR_connect 222 +#define __NR_listen 223 +#define __NR_accept 224 +#define __NR_getsockname 225 +#define __NR_getpeername 226 +#define __NR_socketpair 227 +#define __NR_send 228 +#define __NR_sendto 229 +#define __NR_recv 230 +#define __NR_recvfrom 231 +#define __NR_shutdown 232 +#define __NR_setsockopt 233 +#define __NR_getsockopt 234 +#define __NR_sendmsg 235 +#define __NR_recvmsg 236 + +/* Non-multiplexed IPC family */ +#define __NR_semop 237 +#define __NR_semget 238 +#define __NR_semctl 239 +#define __NR_msgsnd 240 +#define __NR_msgrcv 241 +#define __NR_msgget 242 +#define __NR_msgctl 243 +#define __NR_shmat 244 +#define __NR_shmdt 245 +#define __NR_shmget 246 +#define __NR_shmctl 247 + +#define __NR_getdents64 248 +#define __NR_fcntl64 249 + /* 250 is reserved for tux */ + /* 251 is unused */ +#define __NR_gettid 252 +#define __NR_readahead 253 +#define __NR_setxattr 254 +#define __NR_lsetxattr 255 +#define __NR_fsetxattr 256 +#define __NR_getxattr 257 +#define __NR_lgetxattr 258 +#define __NR_fgetxattr 269 +#define __NR_listxattr 260 +#define __NR_llistxattr 261 +#define __NR_flistxattr 262 +#define __NR_removexattr 263 +#define __NR_lremovexattr 264 +#define __NR_fremovexattr 265 +#define __NR_tkill 266 +#define __NR_sendfile64 267 +#define __NR_futex 268 +#define __NR_sched_setaffinity 269 +#define __NR_sched_getaffinity 270 + /* 271 is reserved for set_thread_area */ + /* 272 is reserved for get_thread_area */ +#define __NR_io_setup 273 +#define __NR_io_destroy 274 +#define __NR_io_getevents 275 +#define __NR_io_submit 276 +#define __NR_io_cancel 277 +#define __NR_fadvise64 278 + /* 279 is unused */ +#define __NR_exit_group 280 + +#define __NR_lookup_dcookie 281 +#define __NR_epoll_create 282 +#define __NR_epoll_ctl 283 +#define __NR_epoll_wait 284 +#define __NR_remap_file_pages 285 +#define __NR_set_tid_address 286 +#define __NR_timer_create 287 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 296 +#define __NR_fstatfs64 297 +#define __NR_tgkill 298 +#define __NR_utimes 299 +#define __NR_fadvise64_64 300 + /* 301 is reserved for vserver */ + /* 302 is reserved for mbind */ + /* 303 is reserved for get_mempolicy */ + /* 304 is reserved for set_mempolicy */ +#define __NR_mq_open 305 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) + /* 311 is reserved for kexec */ +#define __NR_waitid 312 +#define __NR_add_key 313 +#define __NR_request_key 314 +#define __NR_keyctl 315 +#define __NR_ioprio_set 316 +#define __NR_ioprio_get 317 +#define __NR_inotify_init 318 +#define __NR_inotify_add_watch 319 +#define __NR_inotify_rm_watch 320 + /* 321 is unused */ +#define __NR_migrate_pages 322 +#define __NR_openat 323 +#define __NR_mkdirat 324 +#define __NR_mknodat 325 +#define __NR_fchownat 326 +#define __NR_futimesat 327 +#define __NR_fstatat64 328 +#define __NR_unlinkat 329 +#define __NR_renameat 330 +#define __NR_linkat 331 +#define __NR_symlinkat 332 +#define __NR_readlinkat 333 +#define __NR_fchmodat 334 +#define __NR_faccessat 335 +#define __NR_pselect6 336 +#define __NR_ppoll 337 +#define __NR_unshare 338 +#define __NR_set_robust_list 339 +#define __NR_get_robust_list 340 +#define __NR_splice 341 +#define __NR_sync_file_range 342 +#define __NR_tee 343 +#define __NR_vmsplice 344 +#define __NR_move_pages 345 +#define __NR_getcpu 346 +#define __NR_epoll_pwait 347 +#define __NR_utimensat 348 +#define __NR_signalfd 349 +#define __NR_timerfd_create 350 +#define __NR_eventfd 351 +#define __NR_fallocate 352 +#define __NR_timerfd_settime 353 +#define __NR_timerfd_gettime 354 +#define __NR_signalfd4 355 +#define __NR_eventfd2 356 +#define __NR_epoll_create1 357 +#define __NR_dup3 358 +#define __NR_pipe2 359 +#define __NR_inotify_init1 360 +#define __NR_preadv 361 +#define __NR_pwritev 362 +#define __NR_rt_tgsigqueueinfo 363 +#define __NR_perf_event_open 364 +#define __NR_recvmmsg 365 +#define __NR_accept4 366 +#define __NR_fanotify_init 367 +#define __NR_fanotify_mark 368 +#define __NR_prlimit64 369 +#define __NR_name_to_handle_at 370 +#define __NR_open_by_handle_at 371 +#define __NR_clock_adjtime 372 +#define __NR_syncfs 373 +#define __NR_sendmmsg 374 +#define __NR_setns 375 +#define __NR_process_vm_readv 376 +#define __NR_process_vm_writev 377 + +#define NR_syscalls 378 + +#endif /* __ASM_SH_UNISTD_64_H */ -- cgit v0.10.2 From 5217c129443600b414e5b64aafe358952b78a65d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:48:44 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux/hsi Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild index 271a770..e69de29 100644 --- a/include/linux/hsi/Kbuild +++ b/include/linux/hsi/Kbuild @@ -1 +0,0 @@ -header-y += hsi_char.h diff --git a/include/linux/hsi/hsi_char.h b/include/linux/hsi/hsi_char.h deleted file mode 100644 index 76160b4..0000000 --- a/include/linux/hsi/hsi_char.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Part of the HSI character device driver. - * - * Copyright (C) 2010 Nokia Corporation. All rights reserved. - * - * Contact: Andras Domokos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - - -#ifndef __HSI_CHAR_H -#define __HSI_CHAR_H - -#define HSI_CHAR_MAGIC 'k' -#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num) - -#define HSC_RESET HSC_IO(16) -#define HSC_SET_PM HSC_IO(17) -#define HSC_SEND_BREAK HSC_IO(18) -#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config) -#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config) -#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config) -#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config) - -#define HSC_PM_DISABLE 0 -#define HSC_PM_ENABLE 1 - -#define HSC_MODE_STREAM 1 -#define HSC_MODE_FRAME 2 -#define HSC_FLOW_SYNC 0 -#define HSC_ARB_RR 0 -#define HSC_ARB_PRIO 1 - -struct hsc_rx_config { - uint32_t mode; - uint32_t flow; - uint32_t channels; -}; - -struct hsc_tx_config { - uint32_t mode; - uint32_t channels; - uint32_t speed; - uint32_t arb_mode; -}; - -#endif /* __HSI_CHAR_H */ diff --git a/include/uapi/linux/hsi/Kbuild b/include/uapi/linux/hsi/Kbuild index aafaa5a..30ab3cd 100644 --- a/include/uapi/linux/hsi/Kbuild +++ b/include/uapi/linux/hsi/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += hsi_char.h diff --git a/include/uapi/linux/hsi/hsi_char.h b/include/uapi/linux/hsi/hsi_char.h new file mode 100644 index 0000000..76160b4 --- /dev/null +++ b/include/uapi/linux/hsi/hsi_char.h @@ -0,0 +1,63 @@ +/* + * Part of the HSI character device driver. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + + +#ifndef __HSI_CHAR_H +#define __HSI_CHAR_H + +#define HSI_CHAR_MAGIC 'k' +#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num) + +#define HSC_RESET HSC_IO(16) +#define HSC_SET_PM HSC_IO(17) +#define HSC_SEND_BREAK HSC_IO(18) +#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config) +#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config) +#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config) +#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config) + +#define HSC_PM_DISABLE 0 +#define HSC_PM_ENABLE 1 + +#define HSC_MODE_STREAM 1 +#define HSC_MODE_FRAME 2 +#define HSC_FLOW_SYNC 0 +#define HSC_ARB_RR 0 +#define HSC_ARB_PRIO 1 + +struct hsc_rx_config { + uint32_t mode; + uint32_t flow; + uint32_t channels; +}; + +struct hsc_tx_config { + uint32_t mode; + uint32_t channels; + uint32_t speed; + uint32_t arb_mode; +}; + +#endif /* __HSI_CHAR_H */ -- cgit v0.10.2 From fc5a40a2301aa241eedb16caf9169ca5763707c1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:49:02 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux/raid Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones diff --git a/include/linux/raid/Kbuild b/include/linux/raid/Kbuild index 2415a64..e69de29 100644 --- a/include/linux/raid/Kbuild +++ b/include/linux/raid/Kbuild @@ -1,2 +0,0 @@ -header-y += md_p.h -header-y += md_u.h diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h deleted file mode 100644 index ee75353..0000000 --- a/include/linux/raid/md_p.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - md_p.h : physical layout of Linux RAID devices - Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - You should have received a copy of the GNU General Public License - (for example /usr/src/linux/COPYING); if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _MD_P_H -#define _MD_P_H - -#include - -/* - * RAID superblock. - * - * The RAID superblock maintains some statistics on each RAID configuration. - * Each real device in the RAID set contains it near the end of the device. - * Some of the ideas are copied from the ext2fs implementation. - * - * We currently use 4096 bytes as follows: - * - * word offset function - * - * 0 - 31 Constant generic RAID device information. - * 32 - 63 Generic state information. - * 64 - 127 Personality specific information. - * 128 - 511 12 32-words descriptors of the disks in the raid set. - * 512 - 911 Reserved. - * 912 - 1023 Disk specific descriptor. - */ - -/* - * If x is the real device size in bytes, we return an apparent size of: - * - * y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES - * - * and place the 4kB superblock at offset y. - */ -#define MD_RESERVED_BYTES (64 * 1024) -#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512) - -#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS) - -#define MD_SB_BYTES 4096 -#define MD_SB_WORDS (MD_SB_BYTES / 4) -#define MD_SB_SECTORS (MD_SB_BYTES / 512) - -/* - * The following are counted in 32-bit words - */ -#define MD_SB_GENERIC_OFFSET 0 -#define MD_SB_PERSONALITY_OFFSET 64 -#define MD_SB_DISKS_OFFSET 128 -#define MD_SB_DESCRIPTOR_OFFSET 992 - -#define MD_SB_GENERIC_CONSTANT_WORDS 32 -#define MD_SB_GENERIC_STATE_WORDS 32 -#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS) -#define MD_SB_PERSONALITY_WORDS 64 -#define MD_SB_DESCRIPTOR_WORDS 32 -#define MD_SB_DISKS 27 -#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS) -#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS) -#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS) - -/* - * Device "operational" state bits - */ -#define MD_DISK_FAULTY 0 /* disk is faulty / operational */ -#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */ -#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */ -#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */ - -#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config. - * read requests will only be sent here in - * dire need - */ - -typedef struct mdp_device_descriptor_s { - __u32 number; /* 0 Device number in the entire set */ - __u32 major; /* 1 Device major number */ - __u32 minor; /* 2 Device minor number */ - __u32 raid_disk; /* 3 The role of the device in the raid set */ - __u32 state; /* 4 Operational state */ - __u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5]; -} mdp_disk_t; - -#define MD_SB_MAGIC 0xa92b4efc - -/* - * Superblock state bits - */ -#define MD_SB_CLEAN 0 -#define MD_SB_ERRORS 1 - -#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */ - -/* - * Notes: - * - if an array is being reshaped (restriped) in order to change the - * the number of active devices in the array, 'raid_disks' will be - * the larger of the old and new numbers. 'delta_disks' will - * be the "new - old". So if +ve, raid_disks is the new value, and - * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the - * old value and "raid_disks+delta_disks" is the new (smaller) value. - */ - - -typedef struct mdp_superblock_s { - /* - * Constant generic information - */ - __u32 md_magic; /* 0 MD identifier */ - __u32 major_version; /* 1 major version to which the set conforms */ - __u32 minor_version; /* 2 minor version ... */ - __u32 patch_version; /* 3 patchlevel version ... */ - __u32 gvalid_words; /* 4 Number of used words in this section */ - __u32 set_uuid0; /* 5 Raid set identifier */ - __u32 ctime; /* 6 Creation time */ - __u32 level; /* 7 Raid personality */ - __u32 size; /* 8 Apparent size of each individual disk */ - __u32 nr_disks; /* 9 total disks in the raid set */ - __u32 raid_disks; /* 10 disks in a fully functional raid set */ - __u32 md_minor; /* 11 preferred MD minor device number */ - __u32 not_persistent; /* 12 does it have a persistent superblock */ - __u32 set_uuid1; /* 13 Raid set identifier #2 */ - __u32 set_uuid2; /* 14 Raid set identifier #3 */ - __u32 set_uuid3; /* 15 Raid set identifier #4 */ - __u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16]; - - /* - * Generic state information - */ - __u32 utime; /* 0 Superblock update time */ - __u32 state; /* 1 State bits (clean, ...) */ - __u32 active_disks; /* 2 Number of currently active disks */ - __u32 working_disks; /* 3 Number of working disks */ - __u32 failed_disks; /* 4 Number of failed disks */ - __u32 spare_disks; /* 5 Number of spare disks */ - __u32 sb_csum; /* 6 checksum of the whole superblock */ -#ifdef __BIG_ENDIAN - __u32 events_hi; /* 7 high-order of superblock update count */ - __u32 events_lo; /* 8 low-order of superblock update count */ - __u32 cp_events_hi; /* 9 high-order of checkpoint update count */ - __u32 cp_events_lo; /* 10 low-order of checkpoint update count */ -#else - __u32 events_lo; /* 7 low-order of superblock update count */ - __u32 events_hi; /* 8 high-order of superblock update count */ - __u32 cp_events_lo; /* 9 low-order of checkpoint update count */ - __u32 cp_events_hi; /* 10 high-order of checkpoint update count */ -#endif - __u32 recovery_cp; /* 11 recovery checkpoint sector count */ - /* There are only valid for minor_version > 90 */ - __u64 reshape_position; /* 12,13 next address in array-space for reshape */ - __u32 new_level; /* 14 new level we are reshaping to */ - __u32 delta_disks; /* 15 change in number of raid_disks */ - __u32 new_layout; /* 16 new layout */ - __u32 new_chunk; /* 17 new chunk size (bytes) */ - __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18]; - - /* - * Personality information - */ - __u32 layout; /* 0 the array's physical layout */ - __u32 chunk_size; /* 1 chunk size in bytes */ - __u32 root_pv; /* 2 LV root PV */ - __u32 root_block; /* 3 LV root block */ - __u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4]; - - /* - * Disks information - */ - mdp_disk_t disks[MD_SB_DISKS]; - - /* - * Reserved - */ - __u32 reserved[MD_SB_RESERVED_WORDS]; - - /* - * Active descriptor - */ - mdp_disk_t this_disk; - -} mdp_super_t; - -static inline __u64 md_event(mdp_super_t *sb) { - __u64 ev = sb->events_hi; - return (ev<<32)| sb->events_lo; -} - -#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1) - -/* - * The version-1 superblock : - * All numeric fields are little-endian. - * - * total size: 256 bytes plus 2 per device. - * 1K allows 384 devices. - */ -struct mdp_superblock_1 { - /* constant array information - 128 bytes */ - __le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */ - __le32 major_version; /* 1 */ - __le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */ - __le32 pad0; /* always set to 0 when writing */ - - __u8 set_uuid[16]; /* user-space generated. */ - char set_name[32]; /* set and interpreted by user-space */ - - __le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/ - __le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */ - __le32 layout; /* only for raid5 and raid10 currently */ - __le64 size; /* used size of component devices, in 512byte sectors */ - - __le32 chunksize; /* in 512byte sectors */ - __le32 raid_disks; - __le32 bitmap_offset; /* sectors after start of superblock that bitmap starts - * NOTE: signed, so bitmap can be before superblock - * only meaningful of feature_map[0] is set. - */ - - /* These are only valid with feature bit '4' */ - __le32 new_level; /* new level we are reshaping to */ - __le64 reshape_position; /* next address in array-space for reshape */ - __le32 delta_disks; /* change in number of raid_disks */ - __le32 new_layout; /* new layout */ - __le32 new_chunk; /* new chunk size (512byte sectors) */ - __le32 new_offset; /* signed number to add to data_offset in new - * layout. 0 == no-change. This can be - * different on each device in the array. - */ - - /* constant this-device information - 64 bytes */ - __le64 data_offset; /* sector start of data, often 0 */ - __le64 data_size; /* sectors in this device that can be used for data */ - __le64 super_offset; /* sector start of this superblock */ - __le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */ - __le32 dev_number; /* permanent identifier of this device - not role in raid */ - __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */ - __u8 device_uuid[16]; /* user-space setable, ignored by kernel */ - __u8 devflags; /* per-device flags. Only one defined...*/ -#define WriteMostly1 1 /* mask for writemostly flag in above */ - /* Bad block log. If there are any bad blocks the feature flag is set. - * If offset and size are non-zero, that space is reserved and available - */ - __u8 bblog_shift; /* shift from sectors to block size */ - __le16 bblog_size; /* number of sectors reserved for list */ - __le32 bblog_offset; /* sector offset from superblock to bblog, - * signed - not unsigned */ - - /* array state information - 64 bytes */ - __le64 utime; /* 40 bits second, 24 bits microseconds */ - __le64 events; /* incremented when superblock updated */ - __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */ - __le32 sb_csum; /* checksum up to devs[max_dev] */ - __le32 max_dev; /* size of devs[] array to consider */ - __u8 pad3[64-32]; /* set to 0 when writing */ - - /* device state information. Indexed by dev_number. - * 2 bytes per device - * Note there are no per-device state flags. State information is rolled - * into the 'roles' value. If a device is spare or faulty, then it doesn't - * have a meaningful role. - */ - __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ -}; - -/* feature_map bits */ -#define MD_FEATURE_BITMAP_OFFSET 1 -#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and - * must be honoured - */ -#define MD_FEATURE_RESHAPE_ACTIVE 4 -#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */ -#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an - * active device with same 'role'. - * 'recovery_offset' is also set. - */ -#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number - * of devices, but is going - * backwards anyway. - */ -#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */ -#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ - |MD_FEATURE_RECOVERY_OFFSET \ - |MD_FEATURE_RESHAPE_ACTIVE \ - |MD_FEATURE_BAD_BLOCKS \ - |MD_FEATURE_REPLACEMENT \ - |MD_FEATURE_RESHAPE_BACKWARDS \ - |MD_FEATURE_NEW_OFFSET \ - ) - -#endif diff --git a/include/linux/raid/md_u.h b/include/linux/raid/md_u.h index fb1abb3..358c04b 100644 --- a/include/linux/raid/md_u.h +++ b/include/linux/raid/md_u.h @@ -11,149 +11,10 @@ (for example /usr/src/linux/COPYING); if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - #ifndef _MD_U_H #define _MD_U_H -/* - * Different major versions are not compatible. - * Different minor versions are only downward compatible. - * Different patchlevel versions are downward and upward compatible. - */ -#define MD_MAJOR_VERSION 0 -#define MD_MINOR_VERSION 90 -/* - * MD_PATCHLEVEL_VERSION indicates kernel functionality. - * >=1 means different superblock formats are selectable using SET_ARRAY_INFO - * and major_version/minor_version accordingly - * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT - * in the super status byte - * >=3 means that bitmap superblock version 4 is supported, which uses - * little-ending representation rather than host-endian - */ -#define MD_PATCHLEVEL_VERSION 3 - -/* ioctls */ - -/* status */ -#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) -#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) -#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) -#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) -#define RAID_AUTORUN _IO (MD_MAJOR, 0x14) -#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) - -/* configuration */ -#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20) -#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t) -#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22) -#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t) -#define SET_DISK_INFO _IO (MD_MAJOR, 0x24) -#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25) -#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26) -#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27) -#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28) -#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29) -#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a) -#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int) +#include -/* usage */ -#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) -/* 0x31 was START_ARRAY */ -#define STOP_ARRAY _IO (MD_MAJOR, 0x32) -#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) -#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) - -/* 63 partitions with the alternate major number (mdp) */ -#define MdpMinorShift 6 -#ifdef __KERNEL__ extern int mdp_major; -#endif - -typedef struct mdu_version_s { - int major; - int minor; - int patchlevel; -} mdu_version_t; - -typedef struct mdu_array_info_s { - /* - * Generic constant information - */ - int major_version; - int minor_version; - int patch_version; - int ctime; - int level; - int size; - int nr_disks; - int raid_disks; - int md_minor; - int not_persistent; - - /* - * Generic state information - */ - int utime; /* 0 Superblock update time */ - int state; /* 1 State bits (clean, ...) */ - int active_disks; /* 2 Number of currently active disks */ - int working_disks; /* 3 Number of working disks */ - int failed_disks; /* 4 Number of failed disks */ - int spare_disks; /* 5 Number of spare disks */ - - /* - * Personality information - */ - int layout; /* 0 the array's physical layout */ - int chunk_size; /* 1 chunk size in bytes */ - -} mdu_array_info_t; - -/* non-obvious values for 'level' */ -#define LEVEL_MULTIPATH (-4) -#define LEVEL_LINEAR (-1) -#define LEVEL_FAULTY (-5) - -/* we need a value for 'no level specified' and 0 - * means 'raid0', so we need something else. This is - * for internal use only - */ -#define LEVEL_NONE (-1000000) - -typedef struct mdu_disk_info_s { - /* - * configuration/status of one particular disk - */ - int number; - int major; - int minor; - int raid_disk; - int state; - -} mdu_disk_info_t; - -typedef struct mdu_start_info_s { - /* - * configuration/status of one particular disk - */ - int major; - int minor; - int raid_disk; - int state; - -} mdu_start_info_t; - -typedef struct mdu_bitmap_file_s -{ - char pathname[4096]; -} mdu_bitmap_file_t; - -typedef struct mdu_param_s -{ - int personality; /* 1,2,3,4 */ - int chunk_size; /* in bytes */ - int max_fault; /* unused for now */ -} mdu_param_t; - #endif - diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild index aafaa5a..e2c3d25 100644 --- a/include/uapi/linux/raid/Kbuild +++ b/include/uapi/linux/raid/Kbuild @@ -1 +1,3 @@ # UAPI Header export list +header-y += md_p.h +header-y += md_u.h diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h new file mode 100644 index 0000000..ee75353 --- /dev/null +++ b/include/uapi/linux/raid/md_p.h @@ -0,0 +1,301 @@ +/* + md_p.h : physical layout of Linux RAID devices + Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + You should have received a copy of the GNU General Public License + (for example /usr/src/linux/COPYING); if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _MD_P_H +#define _MD_P_H + +#include + +/* + * RAID superblock. + * + * The RAID superblock maintains some statistics on each RAID configuration. + * Each real device in the RAID set contains it near the end of the device. + * Some of the ideas are copied from the ext2fs implementation. + * + * We currently use 4096 bytes as follows: + * + * word offset function + * + * 0 - 31 Constant generic RAID device information. + * 32 - 63 Generic state information. + * 64 - 127 Personality specific information. + * 128 - 511 12 32-words descriptors of the disks in the raid set. + * 512 - 911 Reserved. + * 912 - 1023 Disk specific descriptor. + */ + +/* + * If x is the real device size in bytes, we return an apparent size of: + * + * y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES + * + * and place the 4kB superblock at offset y. + */ +#define MD_RESERVED_BYTES (64 * 1024) +#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512) + +#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS) + +#define MD_SB_BYTES 4096 +#define MD_SB_WORDS (MD_SB_BYTES / 4) +#define MD_SB_SECTORS (MD_SB_BYTES / 512) + +/* + * The following are counted in 32-bit words + */ +#define MD_SB_GENERIC_OFFSET 0 +#define MD_SB_PERSONALITY_OFFSET 64 +#define MD_SB_DISKS_OFFSET 128 +#define MD_SB_DESCRIPTOR_OFFSET 992 + +#define MD_SB_GENERIC_CONSTANT_WORDS 32 +#define MD_SB_GENERIC_STATE_WORDS 32 +#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS) +#define MD_SB_PERSONALITY_WORDS 64 +#define MD_SB_DESCRIPTOR_WORDS 32 +#define MD_SB_DISKS 27 +#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS) +#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS) +#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS) + +/* + * Device "operational" state bits + */ +#define MD_DISK_FAULTY 0 /* disk is faulty / operational */ +#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */ +#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */ +#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */ + +#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config. + * read requests will only be sent here in + * dire need + */ + +typedef struct mdp_device_descriptor_s { + __u32 number; /* 0 Device number in the entire set */ + __u32 major; /* 1 Device major number */ + __u32 minor; /* 2 Device minor number */ + __u32 raid_disk; /* 3 The role of the device in the raid set */ + __u32 state; /* 4 Operational state */ + __u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5]; +} mdp_disk_t; + +#define MD_SB_MAGIC 0xa92b4efc + +/* + * Superblock state bits + */ +#define MD_SB_CLEAN 0 +#define MD_SB_ERRORS 1 + +#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */ + +/* + * Notes: + * - if an array is being reshaped (restriped) in order to change the + * the number of active devices in the array, 'raid_disks' will be + * the larger of the old and new numbers. 'delta_disks' will + * be the "new - old". So if +ve, raid_disks is the new value, and + * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the + * old value and "raid_disks+delta_disks" is the new (smaller) value. + */ + + +typedef struct mdp_superblock_s { + /* + * Constant generic information + */ + __u32 md_magic; /* 0 MD identifier */ + __u32 major_version; /* 1 major version to which the set conforms */ + __u32 minor_version; /* 2 minor version ... */ + __u32 patch_version; /* 3 patchlevel version ... */ + __u32 gvalid_words; /* 4 Number of used words in this section */ + __u32 set_uuid0; /* 5 Raid set identifier */ + __u32 ctime; /* 6 Creation time */ + __u32 level; /* 7 Raid personality */ + __u32 size; /* 8 Apparent size of each individual disk */ + __u32 nr_disks; /* 9 total disks in the raid set */ + __u32 raid_disks; /* 10 disks in a fully functional raid set */ + __u32 md_minor; /* 11 preferred MD minor device number */ + __u32 not_persistent; /* 12 does it have a persistent superblock */ + __u32 set_uuid1; /* 13 Raid set identifier #2 */ + __u32 set_uuid2; /* 14 Raid set identifier #3 */ + __u32 set_uuid3; /* 15 Raid set identifier #4 */ + __u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16]; + + /* + * Generic state information + */ + __u32 utime; /* 0 Superblock update time */ + __u32 state; /* 1 State bits (clean, ...) */ + __u32 active_disks; /* 2 Number of currently active disks */ + __u32 working_disks; /* 3 Number of working disks */ + __u32 failed_disks; /* 4 Number of failed disks */ + __u32 spare_disks; /* 5 Number of spare disks */ + __u32 sb_csum; /* 6 checksum of the whole superblock */ +#ifdef __BIG_ENDIAN + __u32 events_hi; /* 7 high-order of superblock update count */ + __u32 events_lo; /* 8 low-order of superblock update count */ + __u32 cp_events_hi; /* 9 high-order of checkpoint update count */ + __u32 cp_events_lo; /* 10 low-order of checkpoint update count */ +#else + __u32 events_lo; /* 7 low-order of superblock update count */ + __u32 events_hi; /* 8 high-order of superblock update count */ + __u32 cp_events_lo; /* 9 low-order of checkpoint update count */ + __u32 cp_events_hi; /* 10 high-order of checkpoint update count */ +#endif + __u32 recovery_cp; /* 11 recovery checkpoint sector count */ + /* There are only valid for minor_version > 90 */ + __u64 reshape_position; /* 12,13 next address in array-space for reshape */ + __u32 new_level; /* 14 new level we are reshaping to */ + __u32 delta_disks; /* 15 change in number of raid_disks */ + __u32 new_layout; /* 16 new layout */ + __u32 new_chunk; /* 17 new chunk size (bytes) */ + __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18]; + + /* + * Personality information + */ + __u32 layout; /* 0 the array's physical layout */ + __u32 chunk_size; /* 1 chunk size in bytes */ + __u32 root_pv; /* 2 LV root PV */ + __u32 root_block; /* 3 LV root block */ + __u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4]; + + /* + * Disks information + */ + mdp_disk_t disks[MD_SB_DISKS]; + + /* + * Reserved + */ + __u32 reserved[MD_SB_RESERVED_WORDS]; + + /* + * Active descriptor + */ + mdp_disk_t this_disk; + +} mdp_super_t; + +static inline __u64 md_event(mdp_super_t *sb) { + __u64 ev = sb->events_hi; + return (ev<<32)| sb->events_lo; +} + +#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1) + +/* + * The version-1 superblock : + * All numeric fields are little-endian. + * + * total size: 256 bytes plus 2 per device. + * 1K allows 384 devices. + */ +struct mdp_superblock_1 { + /* constant array information - 128 bytes */ + __le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */ + __le32 major_version; /* 1 */ + __le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */ + __le32 pad0; /* always set to 0 when writing */ + + __u8 set_uuid[16]; /* user-space generated. */ + char set_name[32]; /* set and interpreted by user-space */ + + __le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/ + __le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */ + __le32 layout; /* only for raid5 and raid10 currently */ + __le64 size; /* used size of component devices, in 512byte sectors */ + + __le32 chunksize; /* in 512byte sectors */ + __le32 raid_disks; + __le32 bitmap_offset; /* sectors after start of superblock that bitmap starts + * NOTE: signed, so bitmap can be before superblock + * only meaningful of feature_map[0] is set. + */ + + /* These are only valid with feature bit '4' */ + __le32 new_level; /* new level we are reshaping to */ + __le64 reshape_position; /* next address in array-space for reshape */ + __le32 delta_disks; /* change in number of raid_disks */ + __le32 new_layout; /* new layout */ + __le32 new_chunk; /* new chunk size (512byte sectors) */ + __le32 new_offset; /* signed number to add to data_offset in new + * layout. 0 == no-change. This can be + * different on each device in the array. + */ + + /* constant this-device information - 64 bytes */ + __le64 data_offset; /* sector start of data, often 0 */ + __le64 data_size; /* sectors in this device that can be used for data */ + __le64 super_offset; /* sector start of this superblock */ + __le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */ + __le32 dev_number; /* permanent identifier of this device - not role in raid */ + __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */ + __u8 device_uuid[16]; /* user-space setable, ignored by kernel */ + __u8 devflags; /* per-device flags. Only one defined...*/ +#define WriteMostly1 1 /* mask for writemostly flag in above */ + /* Bad block log. If there are any bad blocks the feature flag is set. + * If offset and size are non-zero, that space is reserved and available + */ + __u8 bblog_shift; /* shift from sectors to block size */ + __le16 bblog_size; /* number of sectors reserved for list */ + __le32 bblog_offset; /* sector offset from superblock to bblog, + * signed - not unsigned */ + + /* array state information - 64 bytes */ + __le64 utime; /* 40 bits second, 24 bits microseconds */ + __le64 events; /* incremented when superblock updated */ + __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */ + __le32 sb_csum; /* checksum up to devs[max_dev] */ + __le32 max_dev; /* size of devs[] array to consider */ + __u8 pad3[64-32]; /* set to 0 when writing */ + + /* device state information. Indexed by dev_number. + * 2 bytes per device + * Note there are no per-device state flags. State information is rolled + * into the 'roles' value. If a device is spare or faulty, then it doesn't + * have a meaningful role. + */ + __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ +}; + +/* feature_map bits */ +#define MD_FEATURE_BITMAP_OFFSET 1 +#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and + * must be honoured + */ +#define MD_FEATURE_RESHAPE_ACTIVE 4 +#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */ +#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an + * active device with same 'role'. + * 'recovery_offset' is also set. + */ +#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number + * of devices, but is going + * backwards anyway. + */ +#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */ +#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ + |MD_FEATURE_RECOVERY_OFFSET \ + |MD_FEATURE_RESHAPE_ACTIVE \ + |MD_FEATURE_BAD_BLOCKS \ + |MD_FEATURE_REPLACEMENT \ + |MD_FEATURE_RESHAPE_BACKWARDS \ + |MD_FEATURE_NEW_OFFSET \ + ) + +#endif diff --git a/include/uapi/linux/raid/md_u.h b/include/uapi/linux/raid/md_u.h new file mode 100644 index 0000000..4133e74 --- /dev/null +++ b/include/uapi/linux/raid/md_u.h @@ -0,0 +1,155 @@ +/* + md_u.h : user <=> kernel API between Linux raidtools and RAID drivers + Copyright (C) 1998 Ingo Molnar + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + You should have received a copy of the GNU General Public License + (for example /usr/src/linux/COPYING); if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _UAPI_MD_U_H +#define _UAPI_MD_U_H + +/* + * Different major versions are not compatible. + * Different minor versions are only downward compatible. + * Different patchlevel versions are downward and upward compatible. + */ +#define MD_MAJOR_VERSION 0 +#define MD_MINOR_VERSION 90 +/* + * MD_PATCHLEVEL_VERSION indicates kernel functionality. + * >=1 means different superblock formats are selectable using SET_ARRAY_INFO + * and major_version/minor_version accordingly + * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT + * in the super status byte + * >=3 means that bitmap superblock version 4 is supported, which uses + * little-ending representation rather than host-endian + */ +#define MD_PATCHLEVEL_VERSION 3 + +/* ioctls */ + +/* status */ +#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) +#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) +#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) +#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) +#define RAID_AUTORUN _IO (MD_MAJOR, 0x14) +#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) + +/* configuration */ +#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20) +#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t) +#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22) +#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t) +#define SET_DISK_INFO _IO (MD_MAJOR, 0x24) +#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25) +#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26) +#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27) +#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28) +#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29) +#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a) +#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int) + +/* usage */ +#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) +/* 0x31 was START_ARRAY */ +#define STOP_ARRAY _IO (MD_MAJOR, 0x32) +#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) +#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) + +/* 63 partitions with the alternate major number (mdp) */ +#define MdpMinorShift 6 + +typedef struct mdu_version_s { + int major; + int minor; + int patchlevel; +} mdu_version_t; + +typedef struct mdu_array_info_s { + /* + * Generic constant information + */ + int major_version; + int minor_version; + int patch_version; + int ctime; + int level; + int size; + int nr_disks; + int raid_disks; + int md_minor; + int not_persistent; + + /* + * Generic state information + */ + int utime; /* 0 Superblock update time */ + int state; /* 1 State bits (clean, ...) */ + int active_disks; /* 2 Number of currently active disks */ + int working_disks; /* 3 Number of working disks */ + int failed_disks; /* 4 Number of failed disks */ + int spare_disks; /* 5 Number of spare disks */ + + /* + * Personality information + */ + int layout; /* 0 the array's physical layout */ + int chunk_size; /* 1 chunk size in bytes */ + +} mdu_array_info_t; + +/* non-obvious values for 'level' */ +#define LEVEL_MULTIPATH (-4) +#define LEVEL_LINEAR (-1) +#define LEVEL_FAULTY (-5) + +/* we need a value for 'no level specified' and 0 + * means 'raid0', so we need something else. This is + * for internal use only + */ +#define LEVEL_NONE (-1000000) + +typedef struct mdu_disk_info_s { + /* + * configuration/status of one particular disk + */ + int number; + int major; + int minor; + int raid_disk; + int state; + +} mdu_disk_info_t; + +typedef struct mdu_start_info_s { + /* + * configuration/status of one particular disk + */ + int major; + int minor; + int raid_disk; + int state; + +} mdu_start_info_t; + +typedef struct mdu_bitmap_file_s +{ + char pathname[4096]; +} mdu_bitmap_file_t; + +typedef struct mdu_param_s +{ + int personality; /* 1,2,3,4 */ + int chunk_size; /* in bytes */ + int max_fault; /* unused for now */ +} mdu_param_t; + +#endif /* _UAPI_MD_U_H */ -- cgit v0.10.2 From 5e1ddb481776a487b15b40579a000b279ce527c9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:49:07 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux/usb Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index b607f35..e69de29 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -1,10 +0,0 @@ -header-y += audio.h -header-y += cdc.h -header-y += ch9.h -header-y += ch11.h -header-y += functionfs.h -header-y += gadgetfs.h -header-y += midi.h -header-y += g_printer.h -header-y += tmc.h -header-y += video.h diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index a54b825..3d84619 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -17,531 +17,11 @@ * Types and defines in this file are either specific to version 1.0 of * this standard or common for newer versions. */ - #ifndef __LINUX_USB_AUDIO_H #define __LINUX_USB_AUDIO_H -#include - -/* bInterfaceProtocol values to denote the version of the standard used */ -#define UAC_VERSION_1 0x00 -#define UAC_VERSION_2 0x20 - -/* A.2 Audio Interface Subclass Codes */ -#define USB_SUBCLASS_AUDIOCONTROL 0x01 -#define USB_SUBCLASS_AUDIOSTREAMING 0x02 -#define USB_SUBCLASS_MIDISTREAMING 0x03 - -/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ -#define UAC_HEADER 0x01 -#define UAC_INPUT_TERMINAL 0x02 -#define UAC_OUTPUT_TERMINAL 0x03 -#define UAC_MIXER_UNIT 0x04 -#define UAC_SELECTOR_UNIT 0x05 -#define UAC_FEATURE_UNIT 0x06 -#define UAC1_PROCESSING_UNIT 0x07 -#define UAC1_EXTENSION_UNIT 0x08 - -/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ -#define UAC_AS_GENERAL 0x01 -#define UAC_FORMAT_TYPE 0x02 -#define UAC_FORMAT_SPECIFIC 0x03 - -/* A.7 Processing Unit Process Types */ -#define UAC_PROCESS_UNDEFINED 0x00 -#define UAC_PROCESS_UP_DOWNMIX 0x01 -#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 -#define UAC_PROCESS_STEREO_EXTENDER 0x03 -#define UAC_PROCESS_REVERB 0x04 -#define UAC_PROCESS_CHORUS 0x05 -#define UAC_PROCESS_DYN_RANGE_COMP 0x06 - -/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_EP_GENERAL 0x01 - -/* A.9 Audio Class-Specific Request Codes */ -#define UAC_SET_ 0x00 -#define UAC_GET_ 0x80 - -#define UAC__CUR 0x1 -#define UAC__MIN 0x2 -#define UAC__MAX 0x3 -#define UAC__RES 0x4 -#define UAC__MEM 0x5 - -#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) -#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) -#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) -#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) -#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) -#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) -#define UAC_SET_RES (UAC_SET_ | UAC__RES) -#define UAC_GET_RES (UAC_GET_ | UAC__RES) -#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) -#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) - -#define UAC_GET_STAT 0xff - -/* A.10 Control Selector Codes */ - -/* A.10.1 Terminal Control Selectors */ -#define UAC_TERM_COPY_PROTECT 0x01 - -/* A.10.2 Feature Unit Control Selectors */ -#define UAC_FU_MUTE 0x01 -#define UAC_FU_VOLUME 0x02 -#define UAC_FU_BASS 0x03 -#define UAC_FU_MID 0x04 -#define UAC_FU_TREBLE 0x05 -#define UAC_FU_GRAPHIC_EQUALIZER 0x06 -#define UAC_FU_AUTOMATIC_GAIN 0x07 -#define UAC_FU_DELAY 0x08 -#define UAC_FU_BASS_BOOST 0x09 -#define UAC_FU_LOUDNESS 0x0a - -#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) - -/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ -#define UAC_UD_ENABLE 0x01 -#define UAC_UD_MODE_SELECT 0x02 - -/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ -#define UAC_DP_ENABLE 0x01 -#define UAC_DP_MODE_SELECT 0x02 - -/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ -#define UAC_3D_ENABLE 0x01 -#define UAC_3D_SPACE 0x02 - -/* A.10.3.4 Reverberation Processing Unit Control Selectors */ -#define UAC_REVERB_ENABLE 0x01 -#define UAC_REVERB_LEVEL 0x02 -#define UAC_REVERB_TIME 0x03 -#define UAC_REVERB_FEEDBACK 0x04 - -/* A.10.3.5 Chorus Processing Unit Control Selectors */ -#define UAC_CHORUS_ENABLE 0x01 -#define UAC_CHORUS_LEVEL 0x02 -#define UAC_CHORUS_RATE 0x03 -#define UAC_CHORUS_DEPTH 0x04 - -/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ -#define UAC_DCR_ENABLE 0x01 -#define UAC_DCR_RATE 0x02 -#define UAC_DCR_MAXAMPL 0x03 -#define UAC_DCR_THRESHOLD 0x04 -#define UAC_DCR_ATTACK_TIME 0x05 -#define UAC_DCR_RELEASE_TIME 0x06 - -/* A.10.4 Extension Unit Control Selectors */ -#define UAC_XU_ENABLE 0x01 - -/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define UAC_MS_HEADER 0x01 -#define UAC_MIDI_IN_JACK 0x02 -#define UAC_MIDI_OUT_JACK 0x03 - -/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_MS_GENERAL 0x01 - -/* Terminals - 2.1 USB Terminal Types */ -#define UAC_TERMINAL_UNDEFINED 0x100 -#define UAC_TERMINAL_STREAMING 0x101 -#define UAC_TERMINAL_VENDOR_SPEC 0x1FF - -/* Terminal Control Selectors */ -/* 4.3.2 Class-Specific AC Interface Descriptor */ -struct uac1_ac_header_descriptor { - __u8 bLength; /* 8 + n */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ - __le16 bcdADC; /* 0x0100 */ - __le16 wTotalLength; /* includes Unit and Terminal desc. */ - __u8 bInCollection; /* n */ - __u8 baInterfaceNr[]; /* [n] */ -} __attribute__ ((packed)); - -#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ -struct uac1_ac_header_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __le16 bcdADC; \ - __le16 wTotalLength; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 4.3.2.1 Input Terminal Descriptor */ -struct uac_input_terminal_descriptor { - __u8 bLength; /* in bytes: 12 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Output Terminal associated */ - __u8 bNrChannels; /* Number of logical output channels */ - __le16 wChannelConfig; - __u8 iChannelNames; - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_INPUT_TERMINAL_SIZE 12 - -/* Terminals - 2.2 Input Terminal Types */ -#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 -#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 -#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 -#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 -#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 -#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 -#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 - -/* Terminals - control selectors */ - -#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 - -/* 4.3.2.2 Output Terminal Descriptor */ -struct uac1_output_terminal_descriptor { - __u8 bLength; /* in bytes: 9 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Input Terminal associated */ - __u8 bSourceID; /* ID of the connected Unit or Terminal*/ - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* Terminals - 2.3 Output Terminal Types */ -#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 -#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 -#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 -#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 -#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 -#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 -#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 -#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 - -/* Set bControlSize = 2 as default setting */ -#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ -struct uac_feature_unit_descriptor_##ch { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bUnitID; \ - __u8 bSourceID; \ - __u8 bControlSize; \ - __le16 bmaControls[ch + 1]; \ - __u8 iFeature; \ -} __attribute__ ((packed)) - -/* 4.3.2.3 Mixer Unit Descriptor */ -struct uac_mixer_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); +#include -static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 4] : - &desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.4 Selector Unit Descriptor */ -struct uac_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUintID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.5 Feature Unit Descriptor */ -struct uac_feature_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bSourceID; - __u8 bControlSize; - __u8 bmaControls[0]; /* variable length */ -} __attribute__((packed)); - -static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.6 Processing Unit Descriptors */ -struct uac_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u16 wProcessType; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 4] : - desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 5] : - &desc->baSourceID[desc->bNrInPins + 7]; -} - -static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return desc->baSourceID[desc->bNrInPins + control_size]; -} - -static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return &desc->baSourceID[desc->bNrInPins + control_size + 1]; -} - -/* 4.5.2 Class-Specific AS Interface Descriptor */ -struct uac1_as_header_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* AS_GENERAL */ - __u8 bTerminalLink; /* Terminal ID of connected Terminal */ - __u8 bDelay; /* Delay introduced by the data path */ - __le16 wFormatTag; /* The Audio Data Format */ -} __attribute__ ((packed)); - -#define UAC_DT_AS_HEADER_SIZE 7 - -/* Formats - A.1.1 Audio Data Format Type I Codes */ -#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I_PCM 0x1 -#define UAC_FORMAT_TYPE_I_PCM8 0x2 -#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 -#define UAC_FORMAT_TYPE_I_ALAW 0x4 -#define UAC_FORMAT_TYPE_I_MULAW 0x5 - -struct uac_format_type_i_continuous_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tLowerSamFreq[3]; - __u8 tUpperSamFreq[3]; -} __attribute__ ((packed)); - -#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 - -struct uac_format_type_i_discrete_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__ ((packed)); - -#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ -struct uac_format_type_i_discrete_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bFormatType; \ - __u8 bNrChannels; \ - __u8 bSubframeSize; \ - __u8 bBitResolution; \ - __u8 bSamFreqType; \ - __u8 tSamFreq[n][3]; \ -} __attribute__ ((packed)) - -#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) - -struct uac_format_type_i_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u8 bSubslotSize; - __u8 bBitResolution; - __u8 bHeaderLength; - __u8 bControlSize; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* Formats - Audio Data Format Type I Codes */ - -#define UAC_FORMAT_TYPE_II_MPEG 0x1001 -#define UAC_FORMAT_TYPE_II_AC3 0x1002 - -struct uac_format_type_ii_discrete_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __le16 wMaxBitRate; - __le16 wSamplesPerFrame; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__((packed)); - -struct uac_format_type_ii_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u16 wMaxBitRate; - __u16 wSamplesPerFrame; - __u8 bHeaderLength; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* type III */ -#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 - -/* Formats - A.2 Format Type Codes */ -#define UAC_FORMAT_TYPE_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I 0x1 -#define UAC_FORMAT_TYPE_II 0x2 -#define UAC_FORMAT_TYPE_III 0x3 -#define UAC_EXT_FORMAT_TYPE_I 0x81 -#define UAC_EXT_FORMAT_TYPE_II 0x82 -#define UAC_EXT_FORMAT_TYPE_III 0x83 - -struct uac_iso_endpoint_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* EP_GENERAL */ - __u8 bmAttributes; - __u8 bLockDelayUnits; - __le16 wLockDelay; -} __attribute__((packed)); -#define UAC_ISO_ENDPOINT_DESC_SIZE 7 - -#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 -#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 -#define UAC_EP_CS_ATTR_FILL_MAX 0x80 - -/* status word format (3.7.1.1) */ - -#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f -#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 - -#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) -#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) - -struct uac1_status_word { - __u8 bStatusType; - __u8 bOriginator; -} __attribute__((packed)); - -#ifdef __KERNEL__ struct usb_audio_control { struct list_head list; @@ -561,6 +41,4 @@ struct usb_audio_control_selector { struct usb_descriptor_header *desc; }; -#endif /* __KERNEL__ */ - #endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h deleted file mode 100644 index 81a9279..0000000 --- a/include/linux/usb/cdc.h +++ /dev/null @@ -1,412 +0,0 @@ -/* - * USB Communications Device Class (CDC) definitions - * - * CDC says how to talk to lots of different types of network adapters, - * notably ethernet adapters and various modems. It's used mostly with - * firmware based USB peripherals. - */ - -#ifndef __LINUX_USB_CDC_H -#define __LINUX_USB_CDC_H - -#include - -#define USB_CDC_SUBCLASS_ACM 0x02 -#define USB_CDC_SUBCLASS_ETHERNET 0x06 -#define USB_CDC_SUBCLASS_WHCM 0x08 -#define USB_CDC_SUBCLASS_DMM 0x09 -#define USB_CDC_SUBCLASS_MDLM 0x0a -#define USB_CDC_SUBCLASS_OBEX 0x0b -#define USB_CDC_SUBCLASS_EEM 0x0c -#define USB_CDC_SUBCLASS_NCM 0x0d - -#define USB_CDC_PROTO_NONE 0 - -#define USB_CDC_ACM_PROTO_AT_V25TER 1 -#define USB_CDC_ACM_PROTO_AT_PCCA101 2 -#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 -#define USB_CDC_ACM_PROTO_AT_GSM 4 -#define USB_CDC_ACM_PROTO_AT_3G 5 -#define USB_CDC_ACM_PROTO_AT_CDMA 6 -#define USB_CDC_ACM_PROTO_VENDOR 0xff - -#define USB_CDC_PROTO_EEM 7 - -#define USB_CDC_NCM_PROTO_NTB 1 - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific descriptors ... there are a couple dozen of them - */ - -#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ -#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ -#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ -#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ -#define USB_CDC_COUNTRY_TYPE 0x07 -#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ -#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ -#define USB_CDC_WHCM_TYPE 0x11 -#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ -#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ -#define USB_CDC_DMM_TYPE 0x14 -#define USB_CDC_OBEX_TYPE 0x15 -#define USB_CDC_NCM_TYPE 0x1a - -/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ -struct usb_cdc_header_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdCDC; -} __attribute__ ((packed)); - -/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ -struct usb_cdc_call_mgmt_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 -#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 - - __u8 bDataInterface; -} __attribute__ ((packed)); - -/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ -struct usb_cdc_acm_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -} __attribute__ ((packed)); - -/* capabilities from 5.2.3.3 */ - -#define USB_CDC_COMM_FEATURE 0x01 -#define USB_CDC_CAP_LINE 0x02 -#define USB_CDC_CAP_BRK 0x04 -#define USB_CDC_CAP_NOTIFY 0x08 - -/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ -struct usb_cdc_union_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bMasterInterface0; - __u8 bSlaveInterface0; - /* ... and there could be other slave interfaces */ -} __attribute__ ((packed)); - -/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ -struct usb_cdc_country_functional_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iCountryCodeRelDate; - __le16 wCountyCode0; - /* ... and there can be a lot of country codes */ -} __attribute__ ((packed)); - -/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ -struct usb_cdc_network_terminal_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bEntityId; - __u8 iName; - __u8 bChannelIndex; - __u8 bPhysicalInterface; -} __attribute__ ((packed)); - -/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ -struct usb_cdc_ether_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iMACAddress; - __le32 bmEthernetStatistics; - __le16 wMaxSegmentSize; - __le16 wNumberMCFilters; - __u8 bNumberPowerFilters; -} __attribute__ ((packed)); - -/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ -struct usb_cdc_dmm_desc { - __u8 bFunctionLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u16 bcdVersion; - __le16 wMaxCommand; -} __attribute__ ((packed)); - -/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ -struct usb_cdc_mdlm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; - __u8 bGUID[16]; -} __attribute__ ((packed)); - -/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ -struct usb_cdc_mdlm_detail_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - /* type is associated with mdlm_desc.bGUID */ - __u8 bGuidDescriptorType; - __u8 bDetailData[0]; -} __attribute__ ((packed)); - -/* "OBEX Control Model Functional Descriptor" */ -struct usb_cdc_obex_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; -} __attribute__ ((packed)); - -/* "NCM Control Model Functional Descriptor" */ -struct usb_cdc_ncm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdNcmVersion; - __u8 bmNetworkCapabilities; -} __attribute__ ((packed)); -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Control Requests (6.2) - * - * section 3.6.2.1 table 4 has the ACM profile, for modems. - * section 3.8.2 table 10 has the ethernet profile. - * - * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, - * heavily dependent on the encapsulated (proprietary) command mechanism. - */ - -#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 -#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 -#define USB_CDC_REQ_SET_LINE_CODING 0x20 -#define USB_CDC_REQ_GET_LINE_CODING 0x21 -#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 -#define USB_CDC_REQ_SEND_BREAK 0x23 -#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 -#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 -#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 -#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 -#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 -#define USB_CDC_GET_NTB_PARAMETERS 0x80 -#define USB_CDC_GET_NET_ADDRESS 0x81 -#define USB_CDC_SET_NET_ADDRESS 0x82 -#define USB_CDC_GET_NTB_FORMAT 0x83 -#define USB_CDC_SET_NTB_FORMAT 0x84 -#define USB_CDC_GET_NTB_INPUT_SIZE 0x85 -#define USB_CDC_SET_NTB_INPUT_SIZE 0x86 -#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87 -#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88 -#define USB_CDC_GET_CRC_MODE 0x89 -#define USB_CDC_SET_CRC_MODE 0x8a - -/* Line Coding Structure from CDC spec 6.2.13 */ -struct usb_cdc_line_coding { - __le32 dwDTERate; - __u8 bCharFormat; -#define USB_CDC_1_STOP_BITS 0 -#define USB_CDC_1_5_STOP_BITS 1 -#define USB_CDC_2_STOP_BITS 2 - - __u8 bParityType; -#define USB_CDC_NO_PARITY 0 -#define USB_CDC_ODD_PARITY 1 -#define USB_CDC_EVEN_PARITY 2 -#define USB_CDC_MARK_PARITY 3 -#define USB_CDC_SPACE_PARITY 4 - - __u8 bDataBits; -} __attribute__ ((packed)); - -/* table 62; bits in multicast filter */ -#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) -#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ -#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) -#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) -#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ - - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Notifications (6.3) sent by interrupt transfers - * - * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications - * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS - * RNDIS also defines its own bit-incompatible notifications - */ - -#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 -#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 -#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 -#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a - -struct usb_cdc_notification { - __u8 bmRequestType; - __u8 bNotificationType; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -struct usb_cdc_speed_change { - __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */ - __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */ -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * Class Specific structures and constants - * - * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1 - * - */ - -struct usb_cdc_ncm_ntb_parameters { - __le16 wLength; - __le16 bmNtbFormatsSupported; - __le32 dwNtbInMaxSize; - __le16 wNdpInDivisor; - __le16 wNdpInPayloadRemainder; - __le16 wNdpInAlignment; - __le16 wPadding1; - __le32 dwNtbOutMaxSize; - __le16 wNdpOutDivisor; - __le16 wNdpOutPayloadRemainder; - __le16 wNdpOutAlignment; - __le16 wNtbOutMaxDatagrams; -} __attribute__ ((packed)); - -/* - * CDC NCM transfer headers, CDC NCM subclass 3.2 - */ - -#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */ -#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */ - -struct usb_cdc_ncm_nth16 { - __le32 dwSignature; - __le16 wHeaderLength; - __le16 wSequence; - __le16 wBlockLength; - __le16 wNdpIndex; -} __attribute__ ((packed)); - -struct usb_cdc_ncm_nth32 { - __le32 dwSignature; - __le16 wHeaderLength; - __le16 wSequence; - __le32 dwBlockLength; - __le32 dwNdpIndex; -} __attribute__ ((packed)); - -/* - * CDC NCM datagram pointers, CDC NCM subclass 3.3 - */ - -#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ -#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ -#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ -#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ - -/* 16-bit NCM Datagram Pointer Entry */ -struct usb_cdc_ncm_dpe16 { - __le16 wDatagramIndex; - __le16 wDatagramLength; -} __attribute__((__packed__)); - -/* 16-bit NCM Datagram Pointer Table */ -struct usb_cdc_ncm_ndp16 { - __le32 dwSignature; - __le16 wLength; - __le16 wNextNdpIndex; - struct usb_cdc_ncm_dpe16 dpe16[0]; -} __attribute__ ((packed)); - -/* 32-bit NCM Datagram Pointer Entry */ -struct usb_cdc_ncm_dpe32 { - __le32 dwDatagramIndex; - __le32 dwDatagramLength; -} __attribute__((__packed__)); - -/* 32-bit NCM Datagram Pointer Table */ -struct usb_cdc_ncm_ndp32 { - __le32 dwSignature; - __le16 wLength; - __le16 wReserved6; - __le32 dwNextNdpIndex; - __le32 dwReserved12; - struct usb_cdc_ncm_dpe32 dpe32[0]; -} __attribute__ ((packed)); - -/* CDC NCM subclass 3.2.1 and 3.2.2 */ -#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C -#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010 - -/* CDC NCM subclass 3.3.3 Datagram Formatting */ -#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30 -#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31 - -/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */ -#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00 -#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE - -/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */ -#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0) -#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1) -#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2) -#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3) -#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4) -#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5) - -/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ -#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0) -#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1) - -/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ -#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04 -#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C - -/* CDC NCM subclass 6.2.5 SetNtbFormat */ -#define USB_CDC_NCM_NTB16_FORMAT 0x00 -#define USB_CDC_NCM_NTB32_FORMAT 0x01 - -/* CDC NCM subclass 6.2.7 SetNtbInputSize */ -#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048 -#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048 - -/* NTB Input Size Structure */ -struct usb_cdc_ncm_ndp_input_size { - __le32 dwNtbInMaxSize; - __le16 wNtbInMaxDatagrams; - __le16 wReserved; -} __attribute__ ((packed)); - -/* CDC NCM subclass 6.2.11 SetCrcMode */ -#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00 -#define USB_CDC_NCM_CRC_APPENDED 0x01 - -#endif /* __LINUX_USB_CDC_H */ diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h deleted file mode 100644 index 7692dc6..0000000 --- a/include/linux/usb/ch11.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * This file holds Hub protocol constants and data structures that are - * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. - * - * It is used/shared between the USB core, the HCDs and couple of other USB - * drivers. - */ - -#ifndef __LINUX_CH11_H -#define __LINUX_CH11_H - -#include /* __u8 etc */ - -/* - * Hub request types - */ - -#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) -#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) - -/* - * Hub class requests - * See USB 2.0 spec Table 11-16 - */ -#define HUB_CLEAR_TT_BUFFER 8 -#define HUB_RESET_TT 9 -#define HUB_GET_TT_STATE 10 -#define HUB_STOP_TT 11 - -/* - * Hub class additional requests defined by USB 3.0 spec - * See USB 3.0 spec Table 10-6 - */ -#define HUB_SET_DEPTH 12 -#define HUB_GET_PORT_ERR_COUNT 13 - -/* - * Hub Class feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define C_HUB_LOCAL_POWER 0 -#define C_HUB_OVER_CURRENT 1 - -/* - * Port feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define USB_PORT_FEAT_CONNECTION 0 -#define USB_PORT_FEAT_ENABLE 1 -#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ -#define USB_PORT_FEAT_OVER_CURRENT 3 -#define USB_PORT_FEAT_RESET 4 -#define USB_PORT_FEAT_L1 5 /* L1 suspend */ -#define USB_PORT_FEAT_POWER 8 -#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ -#define USB_PORT_FEAT_C_CONNECTION 16 -#define USB_PORT_FEAT_C_ENABLE 17 -#define USB_PORT_FEAT_C_SUSPEND 18 -#define USB_PORT_FEAT_C_OVER_CURRENT 19 -#define USB_PORT_FEAT_C_RESET 20 -#define USB_PORT_FEAT_TEST 21 -#define USB_PORT_FEAT_INDICATOR 22 -#define USB_PORT_FEAT_C_PORT_L1 23 - -/* - * Port feature selectors added by USB 3.0 spec. - * See USB 3.0 spec Table 10-7 - */ -#define USB_PORT_FEAT_LINK_STATE 5 -#define USB_PORT_FEAT_U1_TIMEOUT 23 -#define USB_PORT_FEAT_U2_TIMEOUT 24 -#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 -#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 -#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 -#define USB_PORT_FEAT_BH_PORT_RESET 28 -#define USB_PORT_FEAT_C_BH_PORT_RESET 29 -#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 - -#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) - -/* USB 3.0 hub remote wake mask bits, see table 10-14 */ -#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) -#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) -#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) - -/* - * Hub Status and Hub Change results - * See USB 2.0 spec Table 11-19 and Table 11-20 - */ -struct usb_port_status { - __le16 wPortStatus; - __le16 wPortChange; -} __attribute__ ((packed)); - -/* - * wPortStatus bit field - * See USB 2.0 spec Table 11-21 - */ -#define USB_PORT_STAT_CONNECTION 0x0001 -#define USB_PORT_STAT_ENABLE 0x0002 -#define USB_PORT_STAT_SUSPEND 0x0004 -#define USB_PORT_STAT_OVERCURRENT 0x0008 -#define USB_PORT_STAT_RESET 0x0010 -#define USB_PORT_STAT_L1 0x0020 -/* bits 6 to 7 are reserved */ -#define USB_PORT_STAT_POWER 0x0100 -#define USB_PORT_STAT_LOW_SPEED 0x0200 -#define USB_PORT_STAT_HIGH_SPEED 0x0400 -#define USB_PORT_STAT_TEST 0x0800 -#define USB_PORT_STAT_INDICATOR 0x1000 -/* bits 13 to 15 are reserved */ - -/* - * Additions to wPortStatus bit field from USB 3.0 - * See USB 3.0 spec Table 10-10 - */ -#define USB_PORT_STAT_LINK_STATE 0x01e0 -#define USB_SS_PORT_STAT_POWER 0x0200 -#define USB_SS_PORT_STAT_SPEED 0x1c00 -#define USB_PORT_STAT_SPEED_5GBPS 0x0000 -/* Valid only if port is enabled */ -/* Bits that are the same from USB 2.0 */ -#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ - USB_PORT_STAT_ENABLE | \ - USB_PORT_STAT_OVERCURRENT | \ - USB_PORT_STAT_RESET) - -/* - * Definitions for PORT_LINK_STATE values - * (bits 5-8) in wPortStatus - */ -#define USB_SS_PORT_LS_U0 0x0000 -#define USB_SS_PORT_LS_U1 0x0020 -#define USB_SS_PORT_LS_U2 0x0040 -#define USB_SS_PORT_LS_U3 0x0060 -#define USB_SS_PORT_LS_SS_DISABLED 0x0080 -#define USB_SS_PORT_LS_RX_DETECT 0x00a0 -#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 -#define USB_SS_PORT_LS_POLLING 0x00e0 -#define USB_SS_PORT_LS_RECOVERY 0x0100 -#define USB_SS_PORT_LS_HOT_RESET 0x0120 -#define USB_SS_PORT_LS_COMP_MOD 0x0140 -#define USB_SS_PORT_LS_LOOPBACK 0x0160 - -/* - * wPortChange bit field - * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 - * Bits 0 to 5 shown, bits 6 to 15 are reserved - */ -#define USB_PORT_STAT_C_CONNECTION 0x0001 -#define USB_PORT_STAT_C_ENABLE 0x0002 -#define USB_PORT_STAT_C_SUSPEND 0x0004 -#define USB_PORT_STAT_C_OVERCURRENT 0x0008 -#define USB_PORT_STAT_C_RESET 0x0010 -#define USB_PORT_STAT_C_L1 0x0020 -/* - * USB 3.0 wPortChange bit fields - * See USB 3.0 spec Table 10-11 - */ -#define USB_PORT_STAT_C_BH_RESET 0x0020 -#define USB_PORT_STAT_C_LINK_STATE 0x0040 -#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 - -/* - * wHubCharacteristics (masks) - * See USB 2.0 spec Table 11-13, offset 3 - */ -#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ -#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ -#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ -#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ - -#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ - -#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ -#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ -#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ -#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ - -#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ -#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ - -struct usb_hub_status { - __le16 wHubStatus; - __le16 wHubChange; -} __attribute__ ((packed)); - -/* - * Hub Status & Hub Change bit masks - * See USB 2.0 spec Table 11-19 and Table 11-20 - * Bits 0 and 1 for wHubStatus and wHubChange - * Bits 2 to 15 are reserved for both - */ -#define HUB_STATUS_LOCAL_POWER 0x0001 -#define HUB_STATUS_OVERCURRENT 0x0002 -#define HUB_CHANGE_LOCAL_POWER 0x0001 -#define HUB_CHANGE_OVERCURRENT 0x0002 - - -/* - * Hub descriptor - * See USB 2.0 spec Table 11-13 - */ - -#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) -#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) -#define USB_DT_HUB_NONVAR_SIZE 7 -#define USB_DT_SS_HUB_SIZE 12 - -/* - * Hub Device descriptor - * USB Hub class device protocols - */ - -#define USB_HUB_PR_FS 0 /* Full speed hub */ -#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ -#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ -#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ -#define USB_HUB_PR_SS 3 /* Super speed hub */ - -struct usb_hub_descriptor { - __u8 bDescLength; - __u8 bDescriptorType; - __u8 bNbrPorts; - __le16 wHubCharacteristics; - __u8 bPwrOn2PwrGood; - __u8 bHubContrCurrent; - - /* 2.0 and 3.0 hubs differ here */ - union { - struct { - /* add 1 bit for hub status change; round to bytes */ - __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; - __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; - } __attribute__ ((packed)) hs; - - struct { - __u8 bHubHdrDecLat; - __le16 wHubDelay; - __le16 DeviceRemovable; - } __attribute__ ((packed)) ss; - } u; -} __attribute__ ((packed)); - -/* port indicator status selectors, tables 11-7 and 11-25 */ -#define HUB_LED_AUTO 0 -#define HUB_LED_AMBER 1 -#define HUB_LED_GREEN 2 -#define HUB_LED_OFF 3 - -enum hub_led_mode { - INDICATOR_AUTO = 0, - INDICATOR_CYCLE, - /* software blinks for attention: software, hardware, reserved */ - INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, - INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, - INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF -} __attribute__ ((packed)); - -/* Transaction Translator Think Times, in bits */ -#define HUB_TTTT_8_BITS 0x00 -#define HUB_TTTT_16_BITS 0x20 -#define HUB_TTTT_24_BITS 0x40 -#define HUB_TTTT_32_BITS 0x60 - -#endif /* __LINUX_CH11_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index d1d732c..9c210f2 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -29,887 +29,11 @@ * someone that the two other points are non-issues for that * particular descriptor type. */ - #ifndef __LINUX_USB_CH9_H #define __LINUX_USB_CH9_H -#include /* __u8 etc */ -#include /* le16_to_cpu */ - -/*-------------------------------------------------------------------------*/ - -/* CONTROL REQUEST SUPPORT */ - -/* - * USB directions - * - * This bit flag is used in endpoint descriptors' bEndpointAddress field. - * It's also one of three fields in control requests bRequestType. - */ -#define USB_DIR_OUT 0 /* to device */ -#define USB_DIR_IN 0x80 /* to host */ - -/* - * USB types, the second of three bRequestType fields - */ -#define USB_TYPE_MASK (0x03 << 5) -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -/* - * USB recipients, the third of three bRequestType fields - */ -#define USB_RECIP_MASK 0x1f -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 -/* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 - -/* - * Standard requests, for the bRequest field of a SETUP packet. - * - * These are qualified by the bRequestType field, so that for example - * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved - * by a GET_STATUS request. - */ -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C -#define USB_REQ_SET_SEL 0x30 -#define USB_REQ_SET_ISOCH_DELAY 0x31 - -#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ -#define USB_REQ_GET_ENCRYPTION 0x0E -#define USB_REQ_RPIPE_ABORT 0x0E -#define USB_REQ_SET_HANDSHAKE 0x0F -#define USB_REQ_RPIPE_RESET 0x0F -#define USB_REQ_GET_HANDSHAKE 0x10 -#define USB_REQ_SET_CONNECTION 0x11 -#define USB_REQ_SET_SECURITY_DATA 0x12 -#define USB_REQ_GET_SECURITY_DATA 0x13 -#define USB_REQ_SET_WUSB_DATA 0x14 -#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 -#define USB_REQ_LOOPBACK_DATA_READ 0x16 -#define USB_REQ_SET_INTERFACE_DS 0x17 - -/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, - * used by hubs to put ports into a new L1 suspend state, except that it - * forgot to define its number ... - */ - -/* - * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and - * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) Hubs may also support a - * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. - */ -#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ -#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ -#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ -#define USB_DEVICE_BATTERY 2 /* (wireless) */ -#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ -#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ -#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ -#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ -#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ - -/* - * Test Mode Selectors - * See USB 2.0 spec Table 9-7 - */ -#define TEST_J 1 -#define TEST_K 2 -#define TEST_SE0_NAK 3 -#define TEST_PACKET 4 -#define TEST_FORCE_EN 5 - -/* - * New Feature Selectors as added by USB 3.0 - * See USB 3.0 spec Table 9-6 - */ -#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ -#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ -#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ -#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ - -#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 -/* - * Suspend Options, Table 9-7 USB 3.0 spec - */ -#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) -#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) - -#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ - -/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ -#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ -#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ -#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ - -/** - * struct usb_ctrlrequest - SETUP data for a USB device control request - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (le16 byte order) - * @wIndex: matches the USB wIndex field (le16 byte order) - * @wLength: matches the USB wLength field (le16 byte order) - * - * This structure is used to send control requests to a USB device. It matches - * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the - * USB spec for a fuller description of the different fields, and what they are - * used for. - * - * Note that the driver for any interface can issue control requests. - * For most devices, interfaces don't coordinate with each other, so - * such requests may be made at any time. - */ -struct usb_ctrlrequest { - __u8 bRequestType; - __u8 bRequest; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or - * (rarely) accepted by SET_DESCRIPTOR. - * - * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". Within the kernel and when exposed - * through the Linux-USB APIs, they are not converted to cpu byte - * order; it is the responsibility of the client code to do this. - * The single exception is when device and configuration descriptors (but - * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); - * in this case the fields are converted to host endianness by the kernel. - */ - -/* - * Descriptor types ... USB 2.0 spec table 9.5 - */ -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 -#define USB_DT_DEVICE_QUALIFIER 0x06 -#define USB_DT_OTHER_SPEED_CONFIG 0x07 -#define USB_DT_INTERFACE_POWER 0x08 -/* these are from a minor usb 2.0 revision (ECN) */ -#define USB_DT_OTG 0x09 -#define USB_DT_DEBUG 0x0a -#define USB_DT_INTERFACE_ASSOCIATION 0x0b -/* these are from the Wireless USB spec */ -#define USB_DT_SECURITY 0x0c -#define USB_DT_KEY 0x0d -#define USB_DT_ENCRYPTION_TYPE 0x0e -#define USB_DT_BOS 0x0f -#define USB_DT_DEVICE_CAPABILITY 0x10 -#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 -#define USB_DT_WIRE_ADAPTER 0x21 -#define USB_DT_RPIPE 0x22 -#define USB_DT_CS_RADIO_CONTROL 0x23 -/* From the T10 UAS specification */ -#define USB_DT_PIPE_USAGE 0x24 -/* From the USB 3.0 spec */ -#define USB_DT_SS_ENDPOINT_COMP 0x30 - -/* Conventional codes for class-specific descriptors. The convention is - * defined in the USB "Common Class" Spec (3.11). Individual class specs - * are authoritative for their usage, not the "common class" writeup. - */ -#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) -#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) -#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) -#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) -#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) - -/* All standard descriptors have these 2 fields at the beginning */ -struct usb_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE: Device descriptor */ -struct usb_device_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __le16 idVendor; - __le16 idProduct; - __le16 bcdDevice; - __u8 iManufacturer; - __u8 iProduct; - __u8 iSerialNumber; - __u8 bNumConfigurations; -} __attribute__ ((packed)); - -#define USB_DT_DEVICE_SIZE 18 - - -/* - * Device and/or Interface Class codes - * as found in bDeviceClass or bInterfaceClass - * and defined by www.usb.org documents - */ -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PHYSICAL 5 -#define USB_CLASS_STILL_IMAGE 6 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 -#define USB_CLASS_CDC_DATA 0x0a -#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ -#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ -#define USB_CLASS_VIDEO 0x0e -#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 -#define USB_CLASS_MISC 0xef -#define USB_CLASS_APP_SPEC 0xfe -#define USB_CLASS_VENDOR_SPEC 0xff - -#define USB_SUBCLASS_VENDOR_SPEC 0xff - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_CONFIG: Configuration descriptor information. - * - * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the - * descriptor type is different. Highspeed-capable devices can look - * different depending on what speed they're currently running. Only - * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG - * descriptors. - */ -struct usb_config_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumInterfaces; - __u8 bConfigurationValue; - __u8 iConfiguration; - __u8 bmAttributes; - __u8 bMaxPower; -} __attribute__ ((packed)); - -#define USB_DT_CONFIG_SIZE 9 - -/* from config descriptor bmAttributes */ -#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ -#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ -#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ -#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_STRING: String descriptor */ -struct usb_string_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wData[1]; /* UTF-16LE encoded */ -} __attribute__ ((packed)); - -/* note that "string" zero is special, it holds language codes that - * the device supports, not Unicode characters. - */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE: Interface descriptor */ -struct usb_interface_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - __u8 bNumEndpoints; - __u8 bInterfaceClass; - __u8 bInterfaceSubClass; - __u8 bInterfaceProtocol; - __u8 iInterface; -} __attribute__ ((packed)); - -#define USB_DT_INTERFACE_SIZE 9 - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENDPOINT: Endpoint descriptor */ -struct usb_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; - - /* NOTE: these two are _only_ in audio endpoints. */ - /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ - __u8 bRefresh; - __u8 bSynchAddress; -} __attribute__ ((packed)); - -#define USB_DT_ENDPOINT_SIZE 7 -#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ - - -/* - * Endpoints - */ -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 -#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 - -/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ -#define USB_ENDPOINT_INTRTYPE 0x30 -#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) -#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) - -#define USB_ENDPOINT_SYNCTYPE 0x0c -#define USB_ENDPOINT_SYNC_NONE (0 << 2) -#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) -#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) -#define USB_ENDPOINT_SYNC_SYNC (3 << 2) - -#define USB_ENDPOINT_USAGE_MASK 0x30 -#define USB_ENDPOINT_USAGE_DATA 0x00 -#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 -#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ - -/*-------------------------------------------------------------------------*/ - -/** - * usb_endpoint_num - get the endpoint's number - * @epd: endpoint to be checked - * - * Returns @epd's number: 0 to 15. - */ -static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) -{ - return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; -} - -/** - * usb_endpoint_type - get the endpoint's transfer type - * @epd: endpoint to be checked - * - * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according - * to @epd's transfer type. - */ -static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; -} - -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -static inline int usb_endpoint_dir_out( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_bulk( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_control - check if the endpoint has control transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type control, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_control( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_int( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_isoc( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_maxp - get endpoint's max packet size - * @epd: endpoint to be checked - * - * Returns @epd's max packet - */ -static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) -{ - return __le16_to_cpu(epd->wMaxPacketSize); -} - -static inline int usb_endpoint_interrupt_type( - const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; -} - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ -struct usb_ss_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bmAttributes; - __le16 wBytesPerInterval; -} __attribute__ ((packed)); - -#define USB_DT_SS_EP_COMP_SIZE 6 - -/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ -static inline int -usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) -{ - int max_streams; - - if (!comp) - return 0; - - max_streams = comp->bmAttributes & 0x1f; - - if (!max_streams) - return 0; - - max_streams = 1 << max_streams; - - return max_streams; -} - -/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ -#define USB_SS_MULT(p) (1 + ((p) & 0x3)) - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ -struct usb_qualifier_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u8 bNumConfigurations; - __u8 bRESERVED; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_OTG (from OTG 1.0a supplement) */ -struct usb_otg_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bmAttributes; /* support for HNP, SRP, etc */ -} __attribute__ ((packed)); - -/* from usb_otg_descriptor.bmAttributes */ -#define USB_OTG_SRP (1 << 0) -#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ -struct usb_debug_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - /* bulk endpoints with 8 byte maxpacket */ - __u8 bDebugInEndpoint; - __u8 bDebugOutEndpoint; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ -struct usb_interface_assoc_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bFirstInterface; - __u8 bInterfaceCount; - __u8 bFunctionClass; - __u8 bFunctionSubClass; - __u8 bFunctionProtocol; - __u8 iFunction; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SECURITY: group of wireless security descriptors, including - * encryption types available for setting up a CC/association. - */ -struct usb_security_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumEncryptionTypes; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys - * may be retrieved. - */ -struct usb_key_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 tTKID[3]; - __u8 bReserved; - __u8 bKeyData[0]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ -struct usb_encryption_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEncryptionType; -#define USB_ENC_TYPE_UNSECURE 0 -#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ -#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ -#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ - __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ - __u8 bAuthKeyIndex; -} __attribute__((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_BOS: group of device-level capabilities */ -struct usb_bos_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumDeviceCaps; -} __attribute__((packed)); - -#define USB_DT_BOS_SIZE 5 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ -struct usb_dev_cap_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; -} __attribute__((packed)); - -#define USB_CAP_TYPE_WIRELESS_USB 1 - -struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - - __u8 bmAttributes; -#define USB_WIRELESS_P2P_DRD (1 << 1) -#define USB_WIRELESS_BEACON_MASK (3 << 2) -#define USB_WIRELESS_BEACON_SELF (1 << 2) -#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) -#define USB_WIRELESS_BEACON_NONE (3 << 2) - __le16 wPHYRates; /* bit rates, Mbps */ -#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ -#define USB_WIRELESS_PHY_80 (1 << 1) -#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ -#define USB_WIRELESS_PHY_160 (1 << 3) -#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ -#define USB_WIRELESS_PHY_320 (1 << 5) -#define USB_WIRELESS_PHY_400 (1 << 6) -#define USB_WIRELESS_PHY_480 (1 << 7) - __u8 bmTFITXPowerInfo; /* TFI power levels */ - __u8 bmFFITXPowerInfo; /* FFI power levels */ - __le16 bmBandGroup; - __u8 bReserved; -} __attribute__((packed)); - -/* USB 2.0 Extension descriptor */ -#define USB_CAP_TYPE_EXT 2 - -struct usb_ext_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __le32 bmAttributes; -#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ -#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ -#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ -#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ -#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) -#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) -} __attribute__((packed)); - -#define USB_DT_USB_EXT_CAP_SIZE 7 - -/* - * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB - * specific device level capabilities - */ -#define USB_SS_CAP_TYPE 3 -struct usb_ss_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bmAttributes; -#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ - __le16 wSpeedSupported; -#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ -#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ -#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ -#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ - __u8 bFunctionalitySupport; - __u8 bU1devExitLat; - __le16 bU2DevExitLat; -} __attribute__((packed)); - -#define USB_DT_USB_SS_CAP_SIZE 10 - -/* - * Container ID Capability descriptor: Defines the instance unique ID used to - * identify the instance across all operating modes - */ -#define CONTAINER_ID_TYPE 4 -struct usb_ss_container_id_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bReserved; - __u8 ContainerID[16]; /* 128-bit number */ -} __attribute__((packed)); - -#define USB_DT_USB_SS_CONTN_ID_SIZE 20 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with - * each endpoint descriptor for a wireless device - */ -struct usb_wireless_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bMaxSequence; - __le16 wMaxStreamDelay; - __le16 wOverTheAirPacketSize; - __u8 bOverTheAirInterval; - __u8 bmCompAttributes; -#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ -#define USB_ENDPOINT_SWITCH_NO 0 -#define USB_ENDPOINT_SWITCH_SWITCH 1 -#define USB_ENDPOINT_SWITCH_SCALE 2 -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless - * host and a device for connection set up, mutual authentication, and - * exchanging short lived session keys. The handshake depends on a CC. - */ -struct usb_handshake { - __u8 bMessageNumber; - __u8 bStatus; - __u8 tTKID[3]; - __u8 bReserved; - __u8 CDID[16]; - __u8 nonce[16]; - __u8 MIC[8]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). - * A CC may also be set up using non-wireless secure channels (including - * wired USB!), and some devices may support CCs with multiple hosts. - */ -struct usb_connection_context { - __u8 CHID[16]; /* persistent host id */ - __u8 CDID[16]; /* device id (unique w/in host context) */ - __u8 CK[16]; /* connection key */ -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ +#include -/* USB 2.0 defines three speeds, here's how Linux identifies them */ - -enum usb_device_speed { - USB_SPEED_UNKNOWN = 0, /* enumerating */ - USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ - USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ - USB_SPEED_SUPER, /* usb 3.0 */ -}; - -#ifdef __KERNEL__ /** * usb_speed_string() - Returns human readable-name of the speed. @@ -919,86 +43,4 @@ enum usb_device_speed { */ extern const char *usb_speed_string(enum usb_device_speed speed); -#endif - -enum usb_device_state { - /* NOTATTACHED isn't in the USB spec, and this state acts - * the same as ATTACHED ... but it's clearer this way. - */ - USB_STATE_NOTATTACHED = 0, - - /* chapter 9 and authentication (wireless) device states */ - USB_STATE_ATTACHED, - USB_STATE_POWERED, /* wired */ - USB_STATE_RECONNECTING, /* auth */ - USB_STATE_UNAUTHENTICATED, /* auth */ - USB_STATE_DEFAULT, /* limited function */ - USB_STATE_ADDRESS, - USB_STATE_CONFIGURED, /* most functions */ - - USB_STATE_SUSPENDED - - /* NOTE: there are actually four different SUSPENDED - * states, returning to POWERED, DEFAULT, ADDRESS, or - * CONFIGURED respectively when SOF tokens flow again. - * At this level there's no difference between L1 and L2 - * suspend states. (L2 being original USB 1.1 suspend.) - */ -}; - -enum usb3_link_state { - USB3_LPM_U0 = 0, - USB3_LPM_U1, - USB3_LPM_U2, - USB3_LPM_U3 -}; - -/* - * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. - * 0xff means the parent hub will accept transitions to U1, but will not - * initiate a transition. - * - * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to - * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved - * values. - * - * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. - * 0xff means the parent hub will accept transitions to U2, but will not - * initiate a transition. - * - * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to - * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 - * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means - * 65.024ms. - */ -#define USB3_LPM_DISABLED 0x0 -#define USB3_LPM_U1_MAX_TIMEOUT 0x7F -#define USB3_LPM_U2_MAX_TIMEOUT 0xFE -#define USB3_LPM_DEVICE_INITIATED 0xFF - -struct usb_set_sel_req { - __u8 u1_sel; - __u8 u1_pel; - __le16 u2_sel; - __le16 u2_pel; -} __attribute__ ((packed)); - -/* - * The Set System Exit Latency control transfer provides one byte each for - * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each - * are two bytes long. - */ -#define USB3_LPM_MAX_U1_SEL_PEL 0xFF -#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF - -/*-------------------------------------------------------------------------*/ - -/* - * As per USB compliance update, a device that is actively drawing - * more than 100mA from USB must report itself as bus-powered in - * the GetStatus(DEVICE) call. - * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 - */ -#define USB_SELF_POWER_VBUS_MAX_DRAW 100 - #endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h index a843d08..65d0a88 100644 --- a/include/linux/usb/functionfs.h +++ b/include/linux/usb/functionfs.h @@ -1,171 +1,8 @@ #ifndef __LINUX_FUNCTIONFS_H__ #define __LINUX_FUNCTIONFS_H__ 1 +#include -#include -#include - -#include - - -enum { - FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 -}; - - -#ifndef __KERNEL__ - -/* Descriptor of an non-audio endpoint */ -struct usb_endpoint_descriptor_no_audio { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; -} __attribute__((packed)); - - -/* - * All numbers must be in little endian order. - */ - -struct usb_functionfs_descs_head { - __le32 magic; - __le32 length; - __le32 fs_count; - __le32 hs_count; -} __attribute__((packed)); - -/* - * Descriptors format: - * - * | off | name | type | description | - * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | - * | 4 | length | LE32 | length of the whole data chunk | - * | 8 | fs_count | LE32 | number of full-speed descriptors | - * | 12 | hs_count | LE32 | number of high-speed descriptors | - * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | - * | | hs_descrs | Descriptor[] | list of high-speed descriptors | - * - * descs are just valid USB descriptors and have the following format: - * - * | off | name | type | description | - * |-----+-----------------+------+--------------------------| - * | 0 | bLength | U8 | length of the descriptor | - * | 1 | bDescriptorType | U8 | descriptor type | - * | 2 | payload | | descriptor's payload | - */ - -struct usb_functionfs_strings_head { - __le32 magic; - __le32 length; - __le32 str_count; - __le32 lang_count; -} __attribute__((packed)); - -/* - * Strings format: - * - * | off | name | type | description | - * |-----+------------+-----------------------+----------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | - * | 4 | length | LE32 | length of the data chunk | - * | 8 | str_count | LE32 | number of strings | - * | 12 | lang_count | LE32 | number of languages | - * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | - * - * For each language there is one stringtab entry (ie. there are lang_count - * stringtab entires). Each StringTab has following format: - * - * | off | name | type | description | - * |-----+---------+-------------------+------------------------------------| - * | 0 | lang | LE16 | language code | - * | 2 | strings | String[str_count] | array of strings in given language | - * - * For each string there is one strings entry (ie. there are str_count - * string entries). Each String is a NUL terminated string encoded in - * UTF-8. - */ - -#endif - - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_functionfs_event_type { - FUNCTIONFS_BIND, - FUNCTIONFS_UNBIND, - - FUNCTIONFS_ENABLE, - FUNCTIONFS_DISABLE, - - FUNCTIONFS_SETUP, - - FUNCTIONFS_SUSPEND, - FUNCTIONFS_RESUME -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_functionfs_event { - union { - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction */ - struct usb_ctrlrequest setup; - } __attribute__((packed)) u; - - /* enum usb_functionfs_event_type */ - __u8 type; - __u8 _pad[3]; -} __attribute__((packed)); - - -/* Endpoint ioctls */ -/* The same as in gadgetfs */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) - -/* Specific for functionfs */ - -/* - * Returns reverse mapping of an interface. Called on EP0. If there - * is no such interface returns -EDOM. If function is not active - * returns -ENODEV. - */ -#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) - -/* - * Returns real bEndpointAddress of an endpoint. If function is not - * active returns -ENODEV. - */ -#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) - - -#ifdef __KERNEL__ struct ffs_data; struct usb_composite_dev; @@ -197,5 +34,3 @@ static void functionfs_release_dev_callback(struct ffs_data *ffs_data) #endif - -#endif diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h deleted file mode 100644 index 6178fde..0000000 --- a/include/linux/usb/g_printer.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * g_printer.h -- Header file for USB Printer gadget driver - * - * Copyright (C) 2007 Craig W. Nadler - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_USB_G_PRINTER_H -#define __LINUX_USB_G_PRINTER_H - -#define PRINTER_NOT_ERROR 0x08 -#define PRINTER_SELECTED 0x10 -#define PRINTER_PAPER_EMPTY 0x20 - -/* The 'g' code is also used by gadgetfs ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ -#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) -#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) - -#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h deleted file mode 100644 index 0bb12e0..0000000 --- a/include/linux/usb/gadgetfs.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Filesystem based user-mode API to USB Gadget controller hardware - * - * Other than ep0 operations, most things are done by read() and write() - * on endpoint files found in one directory. They are configured by - * writing descriptors, and then may be used for normal stream style - * i/o requests. When ep0 is configured, the device can enumerate; - * when it's closed, the device disconnects from usb. Operations on - * ep0 require ioctl() operations. - * - * Configuration and device descriptors get written to /dev/gadget/$CHIP, - * which may then be used to read usb_gadgetfs_event structs. The driver - * may activate endpoints as it handles SET_CONFIGURATION setup events, - * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT - * then performing data transfers by reading or writing. - */ - -#ifndef __LINUX_USB_GADGETFS_H -#define __LINUX_USB_GADGETFS_H - -#include -#include - -#include - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_gadgetfs_event_type { - GADGETFS_NOP = 0, - - GADGETFS_CONNECT, - GADGETFS_DISCONNECT, - GADGETFS_SETUP, - GADGETFS_SUSPEND, - /* and likely more ! */ -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_gadgetfs_event { - union { - /* NOP, DISCONNECT, SUSPEND: nothing - * ... some hardware can't report disconnection - */ - - /* CONNECT: just the speed */ - enum usb_device_speed speed; - - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction - * ... includes SET_CONFIGURATION, SET_INTERFACE - */ - struct usb_ctrlrequest setup; - } u; - enum usb_gadgetfs_event_type type; -}; - - -/* The 'g' code is also used by printer gadget ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ - -/* endpoint ioctls */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define GADGETFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define GADGETFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define GADGETFS_CLEAR_HALT _IO('g', 3) - -#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h deleted file mode 100644 index c8c52e3..0000000 --- a/include/linux/usb/midi.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * -- USB MIDI definitions. - * - * Copyright (C) 2006 Thumtronics Pty Ltd. - * Developed for Thumtronics by Grey Innovation - * Ben Williamson - * - * This software is distributed under the terms of the GNU General Public - * License ("GPL") version 2, as published by the Free Software Foundation. - * - * This file holds USB constants and structures defined - * by the USB Device Class Definition for MIDI Devices. - * Comments below reference relevant sections of that document: - * - * http://www.usb.org/developers/devclass_docs/midi10.pdf - */ - -#ifndef __LINUX_USB_MIDI_H -#define __LINUX_USB_MIDI_H - -#include - -/* A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define USB_MS_HEADER 0x01 -#define USB_MS_MIDI_IN_JACK 0x02 -#define USB_MS_MIDI_OUT_JACK 0x03 -#define USB_MS_ELEMENT 0x04 - -/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */ -#define USB_MS_GENERAL 0x01 - -/* A.3 MS MIDI IN and OUT Jack Types */ -#define USB_MS_EMBEDDED 0x01 -#define USB_MS_EXTERNAL 0x02 - -/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */ -struct usb_ms_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __le16 bcdMSC; - __le16 wTotalLength; -} __attribute__ ((packed)); - -#define USB_DT_MS_HEADER_SIZE 7 - -/* 6.1.2.2 MIDI IN Jack Descriptor */ -struct usb_midi_in_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 iJack; -} __attribute__ ((packed)); - -#define USB_DT_MIDI_IN_SIZE 6 - -struct usb_midi_source_pin { - __u8 baSourceID; - __u8 baSourcePin; -} __attribute__ ((packed)); - -/* 6.1.2.3 MIDI OUT Jack Descriptor */ -struct usb_midi_out_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 bNrInputPins; /* p */ - struct usb_midi_source_pin pins[]; /* [p] */ - /*__u8 iJack; -- omitted due to variable-sized pins[] */ -} __attribute__ ((packed)); - -#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \ -struct usb_midi_out_jack_descriptor_##p { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bJackType; \ - __u8 bJackID; \ - __u8 bNrInputPins; \ - struct usb_midi_source_pin pins[p]; \ - __u8 iJack; \ -} __attribute__ ((packed)) - -/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */ -struct usb_ms_endpoint_descriptor { - __u8 bLength; /* 4+n */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* USB_MS_GENERAL */ - __u8 bNumEmbMIDIJack; /* n */ - __u8 baAssocJackID[]; /* [n] */ -} __attribute__ ((packed)); - -#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \ -struct usb_ms_endpoint_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bNumEmbMIDIJack; \ - __u8 baAssocJackID[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h deleted file mode 100644 index c045ae1..0000000 --- a/include/linux/usb/tmc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany - * Copyright (C) 2008 Novell, Inc. - * Copyright (C) 2008 Greg Kroah-Hartman - * - * This file holds USB constants defined by the USB Device Class - * Definition for Test and Measurement devices published by the USB-IF. - * - * It also has the ioctl definitions for the usbtmc kernel driver that - * userspace needs to know about. - */ - -#ifndef __LINUX_USB_TMC_H -#define __LINUX_USB_TMC_H - -/* USB TMC status values */ -#define USBTMC_STATUS_SUCCESS 0x01 -#define USBTMC_STATUS_PENDING 0x02 -#define USBTMC_STATUS_FAILED 0x80 -#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 -#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 -#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 - -/* USB TMC requests values */ -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 -#define USBTMC_REQUEST_INITIATE_CLEAR 5 -#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 -#define USBTMC_REQUEST_GET_CAPABILITIES 7 -#define USBTMC_REQUEST_INDICATOR_PULSE 64 - -/* Request values for USBTMC driver's ioctl entry point */ -#define USBTMC_IOC_NR 91 -#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) -#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) -#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) -#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) -#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) -#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) - -#endif diff --git a/include/linux/usb/video.h b/include/linux/usb/video.h deleted file mode 100644 index 3b3b95e..0000000 --- a/include/linux/usb/video.h +++ /dev/null @@ -1,568 +0,0 @@ -/* - * USB Video Class definitions. - * - * Copyright (C) 2009 Laurent Pinchart - * - * This file holds USB constants and structures defined by the USB Device - * Class Definition for Video Devices. Unless otherwise stated, comments - * below reference relevant sections of the USB Video Class 1.1 specification - * available at - * - * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip - */ - -#ifndef __LINUX_USB_VIDEO_H -#define __LINUX_USB_VIDEO_H - -#include - -/* -------------------------------------------------------------------------- - * UVC constants - */ - -/* A.2. Video Interface Subclass Codes */ -#define UVC_SC_UNDEFINED 0x00 -#define UVC_SC_VIDEOCONTROL 0x01 -#define UVC_SC_VIDEOSTREAMING 0x02 -#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03 - -/* A.3. Video Interface Protocol Codes */ -#define UVC_PC_PROTOCOL_UNDEFINED 0x00 - -/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ -#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 -#define UVC_VC_HEADER 0x01 -#define UVC_VC_INPUT_TERMINAL 0x02 -#define UVC_VC_OUTPUT_TERMINAL 0x03 -#define UVC_VC_SELECTOR_UNIT 0x04 -#define UVC_VC_PROCESSING_UNIT 0x05 -#define UVC_VC_EXTENSION_UNIT 0x06 - -/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */ -#define UVC_VS_UNDEFINED 0x00 -#define UVC_VS_INPUT_HEADER 0x01 -#define UVC_VS_OUTPUT_HEADER 0x02 -#define UVC_VS_STILL_IMAGE_FRAME 0x03 -#define UVC_VS_FORMAT_UNCOMPRESSED 0x04 -#define UVC_VS_FRAME_UNCOMPRESSED 0x05 -#define UVC_VS_FORMAT_MJPEG 0x06 -#define UVC_VS_FRAME_MJPEG 0x07 -#define UVC_VS_FORMAT_MPEG2TS 0x0a -#define UVC_VS_FORMAT_DV 0x0c -#define UVC_VS_COLORFORMAT 0x0d -#define UVC_VS_FORMAT_FRAME_BASED 0x10 -#define UVC_VS_FRAME_FRAME_BASED 0x11 -#define UVC_VS_FORMAT_STREAM_BASED 0x12 - -/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */ -#define UVC_EP_UNDEFINED 0x00 -#define UVC_EP_GENERAL 0x01 -#define UVC_EP_ENDPOINT 0x02 -#define UVC_EP_INTERRUPT 0x03 - -/* A.8. Video Class-Specific Request Codes */ -#define UVC_RC_UNDEFINED 0x00 -#define UVC_SET_CUR 0x01 -#define UVC_GET_CUR 0x81 -#define UVC_GET_MIN 0x82 -#define UVC_GET_MAX 0x83 -#define UVC_GET_RES 0x84 -#define UVC_GET_LEN 0x85 -#define UVC_GET_INFO 0x86 -#define UVC_GET_DEF 0x87 - -/* A.9.1. VideoControl Interface Control Selectors */ -#define UVC_VC_CONTROL_UNDEFINED 0x00 -#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02 - -/* A.9.2. Terminal Control Selectors */ -#define UVC_TE_CONTROL_UNDEFINED 0x00 - -/* A.9.3. Selector Unit Control Selectors */ -#define UVC_SU_CONTROL_UNDEFINED 0x00 -#define UVC_SU_INPUT_SELECT_CONTROL 0x01 - -/* A.9.4. Camera Terminal Control Selectors */ -#define UVC_CT_CONTROL_UNDEFINED 0x00 -#define UVC_CT_SCANNING_MODE_CONTROL 0x01 -#define UVC_CT_AE_MODE_CONTROL 0x02 -#define UVC_CT_AE_PRIORITY_CONTROL 0x03 -#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07 -#define UVC_CT_FOCUS_AUTO_CONTROL 0x08 -#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a -#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c -#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e -#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10 -#define UVC_CT_PRIVACY_CONTROL 0x11 - -/* A.9.5. Processing Unit Control Selectors */ -#define UVC_PU_CONTROL_UNDEFINED 0x00 -#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define UVC_PU_BRIGHTNESS_CONTROL 0x02 -#define UVC_PU_CONTRAST_CONTROL 0x03 -#define UVC_PU_GAIN_CONTROL 0x04 -#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define UVC_PU_HUE_CONTROL 0x06 -#define UVC_PU_SATURATION_CONTROL 0x07 -#define UVC_PU_SHARPNESS_CONTROL 0x08 -#define UVC_PU_GAMMA_CONTROL 0x09 -#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define UVC_PU_HUE_AUTO_CONTROL 0x10 -#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12 - -/* A.9.7. VideoStreaming Interface Control Selectors */ -#define UVC_VS_CONTROL_UNDEFINED 0x00 -#define UVC_VS_PROBE_CONTROL 0x01 -#define UVC_VS_COMMIT_CONTROL 0x02 -#define UVC_VS_STILL_PROBE_CONTROL 0x03 -#define UVC_VS_STILL_COMMIT_CONTROL 0x04 -#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define UVC_VS_SYNC_DELAY_CONTROL 0x09 - -/* B.1. USB Terminal Types */ -#define UVC_TT_VENDOR_SPECIFIC 0x0100 -#define UVC_TT_STREAMING 0x0101 - -/* B.2. Input Terminal Types */ -#define UVC_ITT_VENDOR_SPECIFIC 0x0200 -#define UVC_ITT_CAMERA 0x0201 -#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202 - -/* B.3. Output Terminal Types */ -#define UVC_OTT_VENDOR_SPECIFIC 0x0300 -#define UVC_OTT_DISPLAY 0x0301 -#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 - -/* B.4. External Terminal Types */ -#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define UVC_COMPOSITE_CONNECTOR 0x0401 -#define UVC_SVIDEO_CONNECTOR 0x0402 -#define UVC_COMPONENT_CONNECTOR 0x0403 - -/* 2.4.2.2. Status Packet Type */ -#define UVC_STATUS_TYPE_CONTROL 1 -#define UVC_STATUS_TYPE_STREAMING 2 - -/* 2.4.3.3. Payload Header Information */ -#define UVC_STREAM_EOH (1 << 7) -#define UVC_STREAM_ERR (1 << 6) -#define UVC_STREAM_STI (1 << 5) -#define UVC_STREAM_RES (1 << 4) -#define UVC_STREAM_SCR (1 << 3) -#define UVC_STREAM_PTS (1 << 2) -#define UVC_STREAM_EOF (1 << 1) -#define UVC_STREAM_FID (1 << 0) - -/* 4.1.2. Control Capabilities */ -#define UVC_CONTROL_CAP_GET (1 << 0) -#define UVC_CONTROL_CAP_SET (1 << 1) -#define UVC_CONTROL_CAP_DISABLED (1 << 2) -#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) -#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4) - -/* ------------------------------------------------------------------------ - * UVC structures - */ - -/* All UVC descriptors have these 3 fields at the beginning */ -struct uvc_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; -} __attribute__((packed)); - -/* 3.7.2. Video Control Interface Header Descriptor */ -struct uvc_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u16 bcdUVC; - __u16 wTotalLength; - __u32 dwClockFrequency; - __u8 bInCollection; - __u8 baInterfaceNr[]; -} __attribute__((__packed__)); - -#define UVC_DT_HEADER_SIZE(n) (12+(n)) - -#define UVC_HEADER_DESCRIPTOR(n) \ - uvc_header_descriptor_##n - -#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \ -struct UVC_HEADER_DESCRIPTOR(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u16 bcdUVC; \ - __u16 wTotalLength; \ - __u32 dwClockFrequency; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 3.7.2.1. Input Terminal Descriptor */ -struct uvc_input_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 iTerminal; -} __attribute__((__packed__)); - -#define UVC_DT_INPUT_TERMINAL_SIZE 8 - -/* 3.7.2.2. Output Terminal Descriptor */ -struct uvc_output_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 bSourceID; - __u8 iTerminal; -} __attribute__((__packed__)); - -#define UVC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* 3.7.2.3. Camera Terminal Descriptor */ -struct uvc_camera_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 iTerminal; - __u16 wObjectiveFocalLengthMin; - __u16 wObjectiveFocalLengthMax; - __u16 wOcularFocalLength; - __u8 bControlSize; - __u8 bmControls[3]; -} __attribute__((__packed__)); - -#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n)) - -/* 3.7.2.4. Selector Unit Descriptor */ -struct uvc_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[0]; - __u8 iSelector; -} __attribute__((__packed__)); - -#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n)) - -#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ - uvc_selector_unit_descriptor_##n - -#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ -struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bUnitID; \ - __u8 bNrInPins; \ - __u8 baSourceID[n]; \ - __u8 iSelector; \ -} __attribute__ ((packed)) - -/* 3.7.2.5. Processing Unit Descriptor */ -struct uvc_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 bSourceID; - __u16 wMaxMultiplier; - __u8 bControlSize; - __u8 bmControls[2]; - __u8 iProcessing; -} __attribute__((__packed__)); - -#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) - -/* 3.7.2.6. Extension Unit Descriptor */ -struct uvc_extension_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 guidExtensionCode[16]; - __u8 bNumControls; - __u8 bNrInPins; - __u8 baSourceID[0]; - __u8 bControlSize; - __u8 bmControls[0]; - __u8 iExtension; -} __attribute__((__packed__)); - -#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n)) - -#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ - uvc_extension_unit_descriptor_##p_##n - -#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ -struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bUnitID; \ - __u8 guidExtensionCode[16]; \ - __u8 bNumControls; \ - __u8 bNrInPins; \ - __u8 baSourceID[p]; \ - __u8 bControlSize; \ - __u8 bmControls[n]; \ - __u8 iExtension; \ -} __attribute__ ((packed)) - -/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */ -struct uvc_control_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u16 wMaxTransferSize; -} __attribute__((__packed__)); - -#define UVC_DT_CONTROL_ENDPOINT_SIZE 5 - -/* 3.9.2.1. Input Header Descriptor */ -struct uvc_input_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bNumFormats; - __u16 wTotalLength; - __u8 bEndpointAddress; - __u8 bmInfo; - __u8 bTerminalLink; - __u8 bStillCaptureMethod; - __u8 bTriggerSupport; - __u8 bTriggerUsage; - __u8 bControlSize; - __u8 bmaControls[]; -} __attribute__((__packed__)); - -#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p)) - -#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ - uvc_input_header_descriptor_##n_##p - -#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ -struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bNumFormats; \ - __u16 wTotalLength; \ - __u8 bEndpointAddress; \ - __u8 bmInfo; \ - __u8 bTerminalLink; \ - __u8 bStillCaptureMethod; \ - __u8 bTriggerSupport; \ - __u8 bTriggerUsage; \ - __u8 bControlSize; \ - __u8 bmaControls[p][n]; \ -} __attribute__ ((packed)) - -/* 3.9.2.2. Output Header Descriptor */ -struct uvc_output_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bNumFormats; - __u16 wTotalLength; - __u8 bEndpointAddress; - __u8 bTerminalLink; - __u8 bControlSize; - __u8 bmaControls[]; -} __attribute__((__packed__)); - -#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p)) - -#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ - uvc_output_header_descriptor_##n_##p - -#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ -struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bNumFormats; \ - __u16 wTotalLength; \ - __u8 bEndpointAddress; \ - __u8 bTerminalLink; \ - __u8 bControlSize; \ - __u8 bmaControls[p][n]; \ -} __attribute__ ((packed)) - -/* 3.9.2.6. Color matching descriptor */ -struct uvc_color_matching_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bColorPrimaries; - __u8 bTransferCharacteristics; - __u8 bMatrixCoefficients; -} __attribute__((__packed__)); - -#define UVC_DT_COLOR_MATCHING_SIZE 6 - -/* 4.3.1.1. Video Probe and Commit Controls */ -struct uvc_streaming_control { - __u16 bmHint; - __u8 bFormatIndex; - __u8 bFrameIndex; - __u32 dwFrameInterval; - __u16 wKeyFrameRate; - __u16 wPFrameRate; - __u16 wCompQuality; - __u16 wCompWindowSize; - __u16 wDelay; - __u32 dwMaxVideoFrameSize; - __u32 dwMaxPayloadTransferSize; - __u32 dwClockFrequency; - __u8 bmFramingInfo; - __u8 bPreferedVersion; - __u8 bMinVersion; - __u8 bMaxVersion; -} __attribute__((__packed__)); - -/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */ -struct uvc_format_uncompressed { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFormatIndex; - __u8 bNumFrameDescriptors; - __u8 guidFormat[16]; - __u8 bBitsPerPixel; - __u8 bDefaultFrameIndex; - __u8 bAspectRatioX; - __u8 bAspectRatioY; - __u8 bmInterfaceFlags; - __u8 bCopyProtect; -} __attribute__((__packed__)); - -#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27 - -/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */ -struct uvc_frame_uncompressed { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFrameIndex; - __u8 bmCapabilities; - __u16 wWidth; - __u16 wHeight; - __u32 dwMinBitRate; - __u32 dwMaxBitRate; - __u32 dwMaxVideoFrameBufferSize; - __u32 dwDefaultFrameInterval; - __u8 bFrameIntervalType; - __u32 dwFrameInterval[]; -} __attribute__((__packed__)); - -#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n)) - -#define UVC_FRAME_UNCOMPRESSED(n) \ - uvc_frame_uncompressed_##n - -#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \ -struct UVC_FRAME_UNCOMPRESSED(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bFrameIndex; \ - __u8 bmCapabilities; \ - __u16 wWidth; \ - __u16 wHeight; \ - __u32 dwMinBitRate; \ - __u32 dwMaxBitRate; \ - __u32 dwMaxVideoFrameBufferSize; \ - __u32 dwDefaultFrameInterval; \ - __u8 bFrameIntervalType; \ - __u32 dwFrameInterval[n]; \ -} __attribute__ ((packed)) - -/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */ -struct uvc_format_mjpeg { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFormatIndex; - __u8 bNumFrameDescriptors; - __u8 bmFlags; - __u8 bDefaultFrameIndex; - __u8 bAspectRatioX; - __u8 bAspectRatioY; - __u8 bmInterfaceFlags; - __u8 bCopyProtect; -} __attribute__((__packed__)); - -#define UVC_DT_FORMAT_MJPEG_SIZE 11 - -/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */ -struct uvc_frame_mjpeg { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFrameIndex; - __u8 bmCapabilities; - __u16 wWidth; - __u16 wHeight; - __u32 dwMinBitRate; - __u32 dwMaxBitRate; - __u32 dwMaxVideoFrameBufferSize; - __u32 dwDefaultFrameInterval; - __u8 bFrameIntervalType; - __u32 dwFrameInterval[]; -} __attribute__((__packed__)); - -#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n)) - -#define UVC_FRAME_MJPEG(n) \ - uvc_frame_mjpeg_##n - -#define DECLARE_UVC_FRAME_MJPEG(n) \ -struct UVC_FRAME_MJPEG(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bFrameIndex; \ - __u8 bmCapabilities; \ - __u16 wWidth; \ - __u16 wHeight; \ - __u32 dwMinBitRate; \ - __u32 dwMaxBitRate; \ - __u32 dwMaxVideoFrameBufferSize; \ - __u32 dwDefaultFrameInterval; \ - __u8 bFrameIntervalType; \ - __u32 dwFrameInterval[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_VIDEO_H */ - diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild index aafaa5a..6cb4ea8 100644 --- a/include/uapi/linux/usb/Kbuild +++ b/include/uapi/linux/usb/Kbuild @@ -1 +1,11 @@ # UAPI Header export list +header-y += audio.h +header-y += cdc.h +header-y += ch11.h +header-y += ch9.h +header-y += functionfs.h +header-y += g_printer.h +header-y += gadgetfs.h +header-y += midi.h +header-y += tmc.h +header-y += video.h diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h new file mode 100644 index 0000000..ac90037 --- /dev/null +++ b/include/uapi/linux/usb/audio.h @@ -0,0 +1,545 @@ +/* + * -- USB Audio definitions. + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * This file holds USB constants and structures defined + * by the USB Device Class Definition for Audio Devices. + * Comments below reference relevant sections of that document: + * + * http://www.usb.org/developers/devclass_docs/audio10.pdf + * + * Types and defines in this file are either specific to version 1.0 of + * this standard or common for newer versions. + */ + +#ifndef _UAPI__LINUX_USB_AUDIO_H +#define _UAPI__LINUX_USB_AUDIO_H + +#include + +/* bInterfaceProtocol values to denote the version of the standard used */ +#define UAC_VERSION_1 0x00 +#define UAC_VERSION_2 0x20 + +/* A.2 Audio Interface Subclass Codes */ +#define USB_SUBCLASS_AUDIOCONTROL 0x01 +#define USB_SUBCLASS_AUDIOSTREAMING 0x02 +#define USB_SUBCLASS_MIDISTREAMING 0x03 + +/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ +#define UAC_HEADER 0x01 +#define UAC_INPUT_TERMINAL 0x02 +#define UAC_OUTPUT_TERMINAL 0x03 +#define UAC_MIXER_UNIT 0x04 +#define UAC_SELECTOR_UNIT 0x05 +#define UAC_FEATURE_UNIT 0x06 +#define UAC1_PROCESSING_UNIT 0x07 +#define UAC1_EXTENSION_UNIT 0x08 + +/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ +#define UAC_AS_GENERAL 0x01 +#define UAC_FORMAT_TYPE 0x02 +#define UAC_FORMAT_SPECIFIC 0x03 + +/* A.7 Processing Unit Process Types */ +#define UAC_PROCESS_UNDEFINED 0x00 +#define UAC_PROCESS_UP_DOWNMIX 0x01 +#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 +#define UAC_PROCESS_STEREO_EXTENDER 0x03 +#define UAC_PROCESS_REVERB 0x04 +#define UAC_PROCESS_CHORUS 0x05 +#define UAC_PROCESS_DYN_RANGE_COMP 0x06 + +/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_EP_GENERAL 0x01 + +/* A.9 Audio Class-Specific Request Codes */ +#define UAC_SET_ 0x00 +#define UAC_GET_ 0x80 + +#define UAC__CUR 0x1 +#define UAC__MIN 0x2 +#define UAC__MAX 0x3 +#define UAC__RES 0x4 +#define UAC__MEM 0x5 + +#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) +#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) +#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) +#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) +#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) +#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) +#define UAC_SET_RES (UAC_SET_ | UAC__RES) +#define UAC_GET_RES (UAC_GET_ | UAC__RES) +#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) +#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) + +#define UAC_GET_STAT 0xff + +/* A.10 Control Selector Codes */ + +/* A.10.1 Terminal Control Selectors */ +#define UAC_TERM_COPY_PROTECT 0x01 + +/* A.10.2 Feature Unit Control Selectors */ +#define UAC_FU_MUTE 0x01 +#define UAC_FU_VOLUME 0x02 +#define UAC_FU_BASS 0x03 +#define UAC_FU_MID 0x04 +#define UAC_FU_TREBLE 0x05 +#define UAC_FU_GRAPHIC_EQUALIZER 0x06 +#define UAC_FU_AUTOMATIC_GAIN 0x07 +#define UAC_FU_DELAY 0x08 +#define UAC_FU_BASS_BOOST 0x09 +#define UAC_FU_LOUDNESS 0x0a + +#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) + +/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ +#define UAC_UD_ENABLE 0x01 +#define UAC_UD_MODE_SELECT 0x02 + +/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ +#define UAC_DP_ENABLE 0x01 +#define UAC_DP_MODE_SELECT 0x02 + +/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ +#define UAC_3D_ENABLE 0x01 +#define UAC_3D_SPACE 0x02 + +/* A.10.3.4 Reverberation Processing Unit Control Selectors */ +#define UAC_REVERB_ENABLE 0x01 +#define UAC_REVERB_LEVEL 0x02 +#define UAC_REVERB_TIME 0x03 +#define UAC_REVERB_FEEDBACK 0x04 + +/* A.10.3.5 Chorus Processing Unit Control Selectors */ +#define UAC_CHORUS_ENABLE 0x01 +#define UAC_CHORUS_LEVEL 0x02 +#define UAC_CHORUS_RATE 0x03 +#define UAC_CHORUS_DEPTH 0x04 + +/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ +#define UAC_DCR_ENABLE 0x01 +#define UAC_DCR_RATE 0x02 +#define UAC_DCR_MAXAMPL 0x03 +#define UAC_DCR_THRESHOLD 0x04 +#define UAC_DCR_ATTACK_TIME 0x05 +#define UAC_DCR_RELEASE_TIME 0x06 + +/* A.10.4 Extension Unit Control Selectors */ +#define UAC_XU_ENABLE 0x01 + +/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define UAC_MS_HEADER 0x01 +#define UAC_MIDI_IN_JACK 0x02 +#define UAC_MIDI_OUT_JACK 0x03 + +/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_MS_GENERAL 0x01 + +/* Terminals - 2.1 USB Terminal Types */ +#define UAC_TERMINAL_UNDEFINED 0x100 +#define UAC_TERMINAL_STREAMING 0x101 +#define UAC_TERMINAL_VENDOR_SPEC 0x1FF + +/* Terminal Control Selectors */ +/* 4.3.2 Class-Specific AC Interface Descriptor */ +struct uac1_ac_header_descriptor { + __u8 bLength; /* 8 + n */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ + __le16 bcdADC; /* 0x0100 */ + __le16 wTotalLength; /* includes Unit and Terminal desc. */ + __u8 bInCollection; /* n */ + __u8 baInterfaceNr[]; /* [n] */ +} __attribute__ ((packed)); + +#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ +struct uac1_ac_header_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __le16 bcdADC; \ + __le16 wTotalLength; \ + __u8 bInCollection; \ + __u8 baInterfaceNr[n]; \ +} __attribute__ ((packed)) + +/* 4.3.2.1 Input Terminal Descriptor */ +struct uac_input_terminal_descriptor { + __u8 bLength; /* in bytes: 12 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Output Terminal associated */ + __u8 bNrChannels; /* Number of logical output channels */ + __le16 wChannelConfig; + __u8 iChannelNames; + __u8 iTerminal; +} __attribute__ ((packed)); + +#define UAC_DT_INPUT_TERMINAL_SIZE 12 + +/* Terminals - 2.2 Input Terminal Types */ +#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 +#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 +#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 +#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 +#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 +#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 +#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 + +/* Terminals - control selectors */ + +#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 + +/* 4.3.2.2 Output Terminal Descriptor */ +struct uac1_output_terminal_descriptor { + __u8 bLength; /* in bytes: 9 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Input Terminal associated */ + __u8 bSourceID; /* ID of the connected Unit or Terminal*/ + __u8 iTerminal; +} __attribute__ ((packed)); + +#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 + +/* Terminals - 2.3 Output Terminal Types */ +#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 +#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 +#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 +#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 +#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 +#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 +#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 +#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 + +/* Set bControlSize = 2 as default setting */ +#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ +struct uac_feature_unit_descriptor_##ch { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bUnitID; \ + __u8 bSourceID; \ + __u8 bControlSize; \ + __le16 bmaControls[ch + 1]; \ + __u8 iFeature; \ +} __attribute__ ((packed)) + +/* 4.3.2.3 Mixer Unit Descriptor */ +struct uac_mixer_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) +{ + return desc->baSourceID[desc->bNrInPins]; +} + +static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + if (protocol == UAC_VERSION_1) + return (desc->baSourceID[desc->bNrInPins + 2] << 8) | + desc->baSourceID[desc->bNrInPins + 1]; + else + return (desc->baSourceID[desc->bNrInPins + 4] << 24) | + (desc->baSourceID[desc->bNrInPins + 3] << 16) | + (desc->baSourceID[desc->bNrInPins + 2] << 8) | + (desc->baSourceID[desc->bNrInPins + 1]); +} + +static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 3] : + desc->baSourceID[desc->bNrInPins + 5]; +} + +static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + &desc->baSourceID[desc->bNrInPins + 4] : + &desc->baSourceID[desc->bNrInPins + 6]; +} + +static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.4 Selector Unit Descriptor */ +struct uac_selector_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUintID; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.5 Feature Unit Descriptor */ +struct uac_feature_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bSourceID; + __u8 bControlSize; + __u8 bmaControls[0]; /* variable length */ +} __attribute__((packed)); + +static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.6 Processing Unit Descriptors */ +struct uac_processing_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u16 wProcessType; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) +{ + return desc->baSourceID[desc->bNrInPins]; +} + +static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + if (protocol == UAC_VERSION_1) + return (desc->baSourceID[desc->bNrInPins + 2] << 8) | + desc->baSourceID[desc->bNrInPins + 1]; + else + return (desc->baSourceID[desc->bNrInPins + 4] << 24) | + (desc->baSourceID[desc->bNrInPins + 3] << 16) | + (desc->baSourceID[desc->bNrInPins + 2] << 8) | + (desc->baSourceID[desc->bNrInPins + 1]); +} + +static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 3] : + desc->baSourceID[desc->bNrInPins + 5]; +} + +static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 4] : + desc->baSourceID[desc->bNrInPins + 6]; +} + +static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + &desc->baSourceID[desc->bNrInPins + 5] : + &desc->baSourceID[desc->bNrInPins + 7]; +} + +static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); + return desc->baSourceID[desc->bNrInPins + control_size]; +} + +static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); + return &desc->baSourceID[desc->bNrInPins + control_size + 1]; +} + +/* 4.5.2 Class-Specific AS Interface Descriptor */ +struct uac1_as_header_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* AS_GENERAL */ + __u8 bTerminalLink; /* Terminal ID of connected Terminal */ + __u8 bDelay; /* Delay introduced by the data path */ + __le16 wFormatTag; /* The Audio Data Format */ +} __attribute__ ((packed)); + +#define UAC_DT_AS_HEADER_SIZE 7 + +/* Formats - A.1.1 Audio Data Format Type I Codes */ +#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I_PCM 0x1 +#define UAC_FORMAT_TYPE_I_PCM8 0x2 +#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 +#define UAC_FORMAT_TYPE_I_ALAW 0x4 +#define UAC_FORMAT_TYPE_I_MULAW 0x5 + +struct uac_format_type_i_continuous_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tLowerSamFreq[3]; + __u8 tUpperSamFreq[3]; +} __attribute__ ((packed)); + +#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 + +struct uac_format_type_i_discrete_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__ ((packed)); + +#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ +struct uac_format_type_i_discrete_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bFormatType; \ + __u8 bNrChannels; \ + __u8 bSubframeSize; \ + __u8 bBitResolution; \ + __u8 bSamFreqType; \ + __u8 tSamFreq[n][3]; \ +} __attribute__ ((packed)) + +#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) + +struct uac_format_type_i_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u8 bSubslotSize; + __u8 bBitResolution; + __u8 bHeaderLength; + __u8 bControlSize; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* Formats - Audio Data Format Type I Codes */ + +#define UAC_FORMAT_TYPE_II_MPEG 0x1001 +#define UAC_FORMAT_TYPE_II_AC3 0x1002 + +struct uac_format_type_ii_discrete_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __le16 wMaxBitRate; + __le16 wSamplesPerFrame; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__((packed)); + +struct uac_format_type_ii_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u16 wMaxBitRate; + __u16 wSamplesPerFrame; + __u8 bHeaderLength; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* type III */ +#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 + +/* Formats - A.2 Format Type Codes */ +#define UAC_FORMAT_TYPE_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I 0x1 +#define UAC_FORMAT_TYPE_II 0x2 +#define UAC_FORMAT_TYPE_III 0x3 +#define UAC_EXT_FORMAT_TYPE_I 0x81 +#define UAC_EXT_FORMAT_TYPE_II 0x82 +#define UAC_EXT_FORMAT_TYPE_III 0x83 + +struct uac_iso_endpoint_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* EP_GENERAL */ + __u8 bmAttributes; + __u8 bLockDelayUnits; + __le16 wLockDelay; +} __attribute__((packed)); +#define UAC_ISO_ENDPOINT_DESC_SIZE 7 + +#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 +#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 +#define UAC_EP_CS_ATTR_FILL_MAX 0x80 + +/* status word format (3.7.1.1) */ + +#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f +#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 +#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 +#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 + +#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) +#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) + +struct uac1_status_word { + __u8 bStatusType; + __u8 bOriginator; +} __attribute__((packed)); + + +#endif /* _UAPI__LINUX_USB_AUDIO_H */ diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h new file mode 100644 index 0000000..81a9279 --- /dev/null +++ b/include/uapi/linux/usb/cdc.h @@ -0,0 +1,412 @@ +/* + * USB Communications Device Class (CDC) definitions + * + * CDC says how to talk to lots of different types of network adapters, + * notably ethernet adapters and various modems. It's used mostly with + * firmware based USB peripherals. + */ + +#ifndef __LINUX_USB_CDC_H +#define __LINUX_USB_CDC_H + +#include + +#define USB_CDC_SUBCLASS_ACM 0x02 +#define USB_CDC_SUBCLASS_ETHERNET 0x06 +#define USB_CDC_SUBCLASS_WHCM 0x08 +#define USB_CDC_SUBCLASS_DMM 0x09 +#define USB_CDC_SUBCLASS_MDLM 0x0a +#define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c +#define USB_CDC_SUBCLASS_NCM 0x0d + +#define USB_CDC_PROTO_NONE 0 + +#define USB_CDC_ACM_PROTO_AT_V25TER 1 +#define USB_CDC_ACM_PROTO_AT_PCCA101 2 +#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 +#define USB_CDC_ACM_PROTO_AT_GSM 4 +#define USB_CDC_ACM_PROTO_AT_3G 5 +#define USB_CDC_ACM_PROTO_AT_CDMA 6 +#define USB_CDC_ACM_PROTO_VENDOR 0xff + +#define USB_CDC_PROTO_EEM 7 + +#define USB_CDC_NCM_PROTO_NTB 1 + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific descriptors ... there are a couple dozen of them + */ + +#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ +#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ +#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ +#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ +#define USB_CDC_COUNTRY_TYPE 0x07 +#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ +#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ +#define USB_CDC_WHCM_TYPE 0x11 +#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ +#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ +#define USB_CDC_DMM_TYPE 0x14 +#define USB_CDC_OBEX_TYPE 0x15 +#define USB_CDC_NCM_TYPE 0x1a + +/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ +struct usb_cdc_header_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdCDC; +} __attribute__ ((packed)); + +/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ +struct usb_cdc_call_mgmt_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bmCapabilities; +#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 +#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 + + __u8 bDataInterface; +} __attribute__ ((packed)); + +/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ +struct usb_cdc_acm_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bmCapabilities; +} __attribute__ ((packed)); + +/* capabilities from 5.2.3.3 */ + +#define USB_CDC_COMM_FEATURE 0x01 +#define USB_CDC_CAP_LINE 0x02 +#define USB_CDC_CAP_BRK 0x04 +#define USB_CDC_CAP_NOTIFY 0x08 + +/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ +struct usb_cdc_union_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bMasterInterface0; + __u8 bSlaveInterface0; + /* ... and there could be other slave interfaces */ +} __attribute__ ((packed)); + +/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ +struct usb_cdc_country_functional_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 iCountryCodeRelDate; + __le16 wCountyCode0; + /* ... and there can be a lot of country codes */ +} __attribute__ ((packed)); + +/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ +struct usb_cdc_network_terminal_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bEntityId; + __u8 iName; + __u8 bChannelIndex; + __u8 bPhysicalInterface; +} __attribute__ ((packed)); + +/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ +struct usb_cdc_ether_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 iMACAddress; + __le32 bmEthernetStatistics; + __le16 wMaxSegmentSize; + __le16 wNumberMCFilters; + __u8 bNumberPowerFilters; +} __attribute__ ((packed)); + +/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ +struct usb_cdc_dmm_desc { + __u8 bFunctionLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u16 bcdVersion; + __le16 wMaxCommand; +} __attribute__ ((packed)); + +/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ +struct usb_cdc_mdlm_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; + __u8 bGUID[16]; +} __attribute__ ((packed)); + +/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ +struct usb_cdc_mdlm_detail_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + /* type is associated with mdlm_desc.bGUID */ + __u8 bGuidDescriptorType; + __u8 bDetailData[0]; +} __attribute__ ((packed)); + +/* "OBEX Control Model Functional Descriptor" */ +struct usb_cdc_obex_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; +} __attribute__ ((packed)); + +/* "NCM Control Model Functional Descriptor" */ +struct usb_cdc_ncm_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdNcmVersion; + __u8 bmNetworkCapabilities; +} __attribute__ ((packed)); +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific Control Requests (6.2) + * + * section 3.6.2.1 table 4 has the ACM profile, for modems. + * section 3.8.2 table 10 has the ethernet profile. + * + * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, + * heavily dependent on the encapsulated (proprietary) command mechanism. + */ + +#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 +#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 +#define USB_CDC_REQ_SET_LINE_CODING 0x20 +#define USB_CDC_REQ_GET_LINE_CODING 0x21 +#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 +#define USB_CDC_REQ_SEND_BREAK 0x23 +#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 +#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 +#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 +#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 +#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 +#define USB_CDC_GET_NTB_PARAMETERS 0x80 +#define USB_CDC_GET_NET_ADDRESS 0x81 +#define USB_CDC_SET_NET_ADDRESS 0x82 +#define USB_CDC_GET_NTB_FORMAT 0x83 +#define USB_CDC_SET_NTB_FORMAT 0x84 +#define USB_CDC_GET_NTB_INPUT_SIZE 0x85 +#define USB_CDC_SET_NTB_INPUT_SIZE 0x86 +#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87 +#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88 +#define USB_CDC_GET_CRC_MODE 0x89 +#define USB_CDC_SET_CRC_MODE 0x8a + +/* Line Coding Structure from CDC spec 6.2.13 */ +struct usb_cdc_line_coding { + __le32 dwDTERate; + __u8 bCharFormat; +#define USB_CDC_1_STOP_BITS 0 +#define USB_CDC_1_5_STOP_BITS 1 +#define USB_CDC_2_STOP_BITS 2 + + __u8 bParityType; +#define USB_CDC_NO_PARITY 0 +#define USB_CDC_ODD_PARITY 1 +#define USB_CDC_EVEN_PARITY 2 +#define USB_CDC_MARK_PARITY 3 +#define USB_CDC_SPACE_PARITY 4 + + __u8 bDataBits; +} __attribute__ ((packed)); + +/* table 62; bits in multicast filter */ +#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) +#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ +#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) +#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) +#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ + + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific Notifications (6.3) sent by interrupt transfers + * + * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications + * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS + * RNDIS also defines its own bit-incompatible notifications + */ + +#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 +#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 +#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 +#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a + +struct usb_cdc_notification { + __u8 bmRequestType; + __u8 bNotificationType; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +struct usb_cdc_speed_change { + __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */ + __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */ +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * Class Specific structures and constants + * + * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1 + * + */ + +struct usb_cdc_ncm_ntb_parameters { + __le16 wLength; + __le16 bmNtbFormatsSupported; + __le32 dwNtbInMaxSize; + __le16 wNdpInDivisor; + __le16 wNdpInPayloadRemainder; + __le16 wNdpInAlignment; + __le16 wPadding1; + __le32 dwNtbOutMaxSize; + __le16 wNdpOutDivisor; + __le16 wNdpOutPayloadRemainder; + __le16 wNdpOutAlignment; + __le16 wNtbOutMaxDatagrams; +} __attribute__ ((packed)); + +/* + * CDC NCM transfer headers, CDC NCM subclass 3.2 + */ + +#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */ +#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */ + +struct usb_cdc_ncm_nth16 { + __le32 dwSignature; + __le16 wHeaderLength; + __le16 wSequence; + __le16 wBlockLength; + __le16 wNdpIndex; +} __attribute__ ((packed)); + +struct usb_cdc_ncm_nth32 { + __le32 dwSignature; + __le16 wHeaderLength; + __le16 wSequence; + __le32 dwBlockLength; + __le32 dwNdpIndex; +} __attribute__ ((packed)); + +/* + * CDC NCM datagram pointers, CDC NCM subclass 3.3 + */ + +#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ +#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ +#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ +#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ + +/* 16-bit NCM Datagram Pointer Entry */ +struct usb_cdc_ncm_dpe16 { + __le16 wDatagramIndex; + __le16 wDatagramLength; +} __attribute__((__packed__)); + +/* 16-bit NCM Datagram Pointer Table */ +struct usb_cdc_ncm_ndp16 { + __le32 dwSignature; + __le16 wLength; + __le16 wNextNdpIndex; + struct usb_cdc_ncm_dpe16 dpe16[0]; +} __attribute__ ((packed)); + +/* 32-bit NCM Datagram Pointer Entry */ +struct usb_cdc_ncm_dpe32 { + __le32 dwDatagramIndex; + __le32 dwDatagramLength; +} __attribute__((__packed__)); + +/* 32-bit NCM Datagram Pointer Table */ +struct usb_cdc_ncm_ndp32 { + __le32 dwSignature; + __le16 wLength; + __le16 wReserved6; + __le32 dwNextNdpIndex; + __le32 dwReserved12; + struct usb_cdc_ncm_dpe32 dpe32[0]; +} __attribute__ ((packed)); + +/* CDC NCM subclass 3.2.1 and 3.2.2 */ +#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C +#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010 + +/* CDC NCM subclass 3.3.3 Datagram Formatting */ +#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30 +#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31 + +/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */ +#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00 +#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE + +/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */ +#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0) +#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1) +#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2) +#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3) +#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4) +#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5) + +/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ +#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0) +#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1) + +/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ +#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04 +#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C + +/* CDC NCM subclass 6.2.5 SetNtbFormat */ +#define USB_CDC_NCM_NTB16_FORMAT 0x00 +#define USB_CDC_NCM_NTB32_FORMAT 0x01 + +/* CDC NCM subclass 6.2.7 SetNtbInputSize */ +#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048 +#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048 + +/* NTB Input Size Structure */ +struct usb_cdc_ncm_ndp_input_size { + __le32 dwNtbInMaxSize; + __le16 wNtbInMaxDatagrams; + __le16 wReserved; +} __attribute__ ((packed)); + +/* CDC NCM subclass 6.2.11 SetCrcMode */ +#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00 +#define USB_CDC_NCM_CRC_APPENDED 0x01 + +#endif /* __LINUX_USB_CDC_H */ diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h new file mode 100644 index 0000000..7692dc6 --- /dev/null +++ b/include/uapi/linux/usb/ch11.h @@ -0,0 +1,266 @@ +/* + * This file holds Hub protocol constants and data structures that are + * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. + * + * It is used/shared between the USB core, the HCDs and couple of other USB + * drivers. + */ + +#ifndef __LINUX_CH11_H +#define __LINUX_CH11_H + +#include /* __u8 etc */ + +/* + * Hub request types + */ + +#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) +#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) + +/* + * Hub class requests + * See USB 2.0 spec Table 11-16 + */ +#define HUB_CLEAR_TT_BUFFER 8 +#define HUB_RESET_TT 9 +#define HUB_GET_TT_STATE 10 +#define HUB_STOP_TT 11 + +/* + * Hub class additional requests defined by USB 3.0 spec + * See USB 3.0 spec Table 10-6 + */ +#define HUB_SET_DEPTH 12 +#define HUB_GET_PORT_ERR_COUNT 13 + +/* + * Hub Class feature numbers + * See USB 2.0 spec Table 11-17 + */ +#define C_HUB_LOCAL_POWER 0 +#define C_HUB_OVER_CURRENT 1 + +/* + * Port feature numbers + * See USB 2.0 spec Table 11-17 + */ +#define USB_PORT_FEAT_CONNECTION 0 +#define USB_PORT_FEAT_ENABLE 1 +#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ +#define USB_PORT_FEAT_OVER_CURRENT 3 +#define USB_PORT_FEAT_RESET 4 +#define USB_PORT_FEAT_L1 5 /* L1 suspend */ +#define USB_PORT_FEAT_POWER 8 +#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ +#define USB_PORT_FEAT_C_CONNECTION 16 +#define USB_PORT_FEAT_C_ENABLE 17 +#define USB_PORT_FEAT_C_SUSPEND 18 +#define USB_PORT_FEAT_C_OVER_CURRENT 19 +#define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 +#define USB_PORT_FEAT_INDICATOR 22 +#define USB_PORT_FEAT_C_PORT_L1 23 + +/* + * Port feature selectors added by USB 3.0 spec. + * See USB 3.0 spec Table 10-7 + */ +#define USB_PORT_FEAT_LINK_STATE 5 +#define USB_PORT_FEAT_U1_TIMEOUT 23 +#define USB_PORT_FEAT_U2_TIMEOUT 24 +#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 +#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 +#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 +#define USB_PORT_FEAT_BH_PORT_RESET 28 +#define USB_PORT_FEAT_C_BH_PORT_RESET 29 +#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 + +#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) + +/* USB 3.0 hub remote wake mask bits, see table 10-14 */ +#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) +#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) +#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) + +/* + * Hub Status and Hub Change results + * See USB 2.0 spec Table 11-19 and Table 11-20 + */ +struct usb_port_status { + __le16 wPortStatus; + __le16 wPortChange; +} __attribute__ ((packed)); + +/* + * wPortStatus bit field + * See USB 2.0 spec Table 11-21 + */ +#define USB_PORT_STAT_CONNECTION 0x0001 +#define USB_PORT_STAT_ENABLE 0x0002 +#define USB_PORT_STAT_SUSPEND 0x0004 +#define USB_PORT_STAT_OVERCURRENT 0x0008 +#define USB_PORT_STAT_RESET 0x0010 +#define USB_PORT_STAT_L1 0x0020 +/* bits 6 to 7 are reserved */ +#define USB_PORT_STAT_POWER 0x0100 +#define USB_PORT_STAT_LOW_SPEED 0x0200 +#define USB_PORT_STAT_HIGH_SPEED 0x0400 +#define USB_PORT_STAT_TEST 0x0800 +#define USB_PORT_STAT_INDICATOR 0x1000 +/* bits 13 to 15 are reserved */ + +/* + * Additions to wPortStatus bit field from USB 3.0 + * See USB 3.0 spec Table 10-10 + */ +#define USB_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_PORT_STAT_SPEED_5GBPS 0x0000 +/* Valid only if port is enabled */ +/* Bits that are the same from USB 2.0 */ +#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ + USB_PORT_STAT_ENABLE | \ + USB_PORT_STAT_OVERCURRENT | \ + USB_PORT_STAT_RESET) + +/* + * Definitions for PORT_LINK_STATE values + * (bits 5-8) in wPortStatus + */ +#define USB_SS_PORT_LS_U0 0x0000 +#define USB_SS_PORT_LS_U1 0x0020 +#define USB_SS_PORT_LS_U2 0x0040 +#define USB_SS_PORT_LS_U3 0x0060 +#define USB_SS_PORT_LS_SS_DISABLED 0x0080 +#define USB_SS_PORT_LS_RX_DETECT 0x00a0 +#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 +#define USB_SS_PORT_LS_POLLING 0x00e0 +#define USB_SS_PORT_LS_RECOVERY 0x0100 +#define USB_SS_PORT_LS_HOT_RESET 0x0120 +#define USB_SS_PORT_LS_COMP_MOD 0x0140 +#define USB_SS_PORT_LS_LOOPBACK 0x0160 + +/* + * wPortChange bit field + * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 + * Bits 0 to 5 shown, bits 6 to 15 are reserved + */ +#define USB_PORT_STAT_C_CONNECTION 0x0001 +#define USB_PORT_STAT_C_ENABLE 0x0002 +#define USB_PORT_STAT_C_SUSPEND 0x0004 +#define USB_PORT_STAT_C_OVERCURRENT 0x0008 +#define USB_PORT_STAT_C_RESET 0x0010 +#define USB_PORT_STAT_C_L1 0x0020 +/* + * USB 3.0 wPortChange bit fields + * See USB 3.0 spec Table 10-11 + */ +#define USB_PORT_STAT_C_BH_RESET 0x0020 +#define USB_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 + +/* + * wHubCharacteristics (masks) + * See USB 2.0 spec Table 11-13, offset 3 + */ +#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ +#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ +#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ +#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ + +#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ + +#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ +#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ +#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ +#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ + +#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ +#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ + +struct usb_hub_status { + __le16 wHubStatus; + __le16 wHubChange; +} __attribute__ ((packed)); + +/* + * Hub Status & Hub Change bit masks + * See USB 2.0 spec Table 11-19 and Table 11-20 + * Bits 0 and 1 for wHubStatus and wHubChange + * Bits 2 to 15 are reserved for both + */ +#define HUB_STATUS_LOCAL_POWER 0x0001 +#define HUB_STATUS_OVERCURRENT 0x0002 +#define HUB_CHANGE_LOCAL_POWER 0x0001 +#define HUB_CHANGE_OVERCURRENT 0x0002 + + +/* + * Hub descriptor + * See USB 2.0 spec Table 11-13 + */ + +#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) +#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) +#define USB_DT_HUB_NONVAR_SIZE 7 +#define USB_DT_SS_HUB_SIZE 12 + +/* + * Hub Device descriptor + * USB Hub class device protocols + */ + +#define USB_HUB_PR_FS 0 /* Full speed hub */ +#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ +#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ +#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ +#define USB_HUB_PR_SS 3 /* Super speed hub */ + +struct usb_hub_descriptor { + __u8 bDescLength; + __u8 bDescriptorType; + __u8 bNbrPorts; + __le16 wHubCharacteristics; + __u8 bPwrOn2PwrGood; + __u8 bHubContrCurrent; + + /* 2.0 and 3.0 hubs differ here */ + union { + struct { + /* add 1 bit for hub status change; round to bytes */ + __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; + __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; + } __attribute__ ((packed)) hs; + + struct { + __u8 bHubHdrDecLat; + __le16 wHubDelay; + __le16 DeviceRemovable; + } __attribute__ ((packed)) ss; + } u; +} __attribute__ ((packed)); + +/* port indicator status selectors, tables 11-7 and 11-25 */ +#define HUB_LED_AUTO 0 +#define HUB_LED_AMBER 1 +#define HUB_LED_GREEN 2 +#define HUB_LED_OFF 3 + +enum hub_led_mode { + INDICATOR_AUTO = 0, + INDICATOR_CYCLE, + /* software blinks for attention: software, hardware, reserved */ + INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, + INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, + INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF +} __attribute__ ((packed)); + +/* Transaction Translator Think Times, in bits */ +#define HUB_TTTT_8_BITS 0x00 +#define HUB_TTTT_16_BITS 0x20 +#define HUB_TTTT_24_BITS 0x40 +#define HUB_TTTT_32_BITS 0x60 + +#endif /* __LINUX_CH11_H */ diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h new file mode 100644 index 0000000..5059847 --- /dev/null +++ b/include/uapi/linux/usb/ch9.h @@ -0,0 +1,993 @@ +/* + * This file holds USB constants and structures that are needed for + * USB device APIs. These are used by the USB device model, which is + * defined in chapter 9 of the USB 2.0 specification and in the + * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - the Linux "gadget" slave/device/peripheral side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs benefit from working well together. + * + * There's also "Wireless USB", using low power short range radios for + * peripheral interconnection but otherwise building on the USB framework. + * + * Note all descriptors are declared '__attribute__((packed))' so that: + * + * [a] they never get padded, either internally (USB spec writers + * probably handled that) or externally; + * + * [b] so that accessing bigger-than-a-bytes fields will never + * generate bus errors on any platform, even when the location of + * its descriptor inside a bundle isn't "naturally aligned", and + * + * [c] for consistency, removing all doubt even when it appears to + * someone that the two other points are non-issues for that + * particular descriptor type. + */ + +#ifndef _UAPI__LINUX_USB_CH9_H +#define _UAPI__LINUX_USB_CH9_H + +#include /* __u8 etc */ +#include /* le16_to_cpu */ + +/*-------------------------------------------------------------------------*/ + +/* CONTROL REQUEST SUPPORT */ + +/* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ +#define USB_DIR_OUT 0 /* to device */ +#define USB_DIR_IN 0x80 /* to host */ + +/* + * USB types, the second of three bRequestType fields + */ +#define USB_TYPE_MASK (0x03 << 5) +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients, the third of three bRequestType fields + */ +#define USB_RECIP_MASK 0x1f +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 +/* From Wireless USB 1.0 */ +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 + +/* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C +#define USB_REQ_SET_SEL 0x30 +#define USB_REQ_SET_ISOCH_DELAY 0x31 + +#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ +#define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E +#define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F +#define USB_REQ_GET_HANDSHAKE 0x10 +#define USB_REQ_SET_CONNECTION 0x11 +#define USB_REQ_SET_SECURITY_DATA 0x12 +#define USB_REQ_GET_SECURITY_DATA 0x13 +#define USB_REQ_SET_WUSB_DATA 0x14 +#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 +#define USB_REQ_LOOPBACK_DATA_READ 0x16 +#define USB_REQ_SET_INTERFACE_DS 0x17 + +/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, + * used by hubs to put ports into a new L1 suspend state, except that it + * forgot to define its number ... + */ + +/* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) Hubs may also support a + * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. + */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ +#define USB_DEVICE_BATTERY 2 /* (wireless) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ +#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +/* + * Test Mode Selectors + * See USB 2.0 spec Table 9-7 + */ +#define TEST_J 1 +#define TEST_K 2 +#define TEST_SE0_NAK 3 +#define TEST_PACKET 4 +#define TEST_FORCE_EN 5 + +/* + * New Feature Selectors as added by USB 3.0 + * See USB 3.0 spec Table 9-6 + */ +#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ +#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ +#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ +#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ + +#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-7 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) + +#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + +/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ +#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ +#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ +#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ + +/** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ +struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". Within the kernel and when exposed + * through the Linux-USB APIs, they are not converted to cpu byte + * order; it is the responsibility of the client code to do this. + * The single exception is when device and configuration descriptors (but + * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * in this case the fields are converted to host endianness by the kernel. + */ + +/* + * Descriptor types ... USB 2.0 spec table 9.5 + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 +#define USB_DT_DEVICE_QUALIFIER 0x06 +#define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_INTERFACE_POWER 0x08 +/* these are from a minor usb 2.0 revision (ECN) */ +#define USB_DT_OTG 0x09 +#define USB_DT_DEBUG 0x0a +#define USB_DT_INTERFACE_ASSOCIATION 0x0b +/* these are from the Wireless USB spec */ +#define USB_DT_SECURITY 0x0c +#define USB_DT_KEY 0x0d +#define USB_DT_ENCRYPTION_TYPE 0x0e +#define USB_DT_BOS 0x0f +#define USB_DT_DEVICE_CAPABILITY 0x10 +#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DT_WIRE_ADAPTER 0x21 +#define USB_DT_RPIPE 0x22 +#define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the T10 UAS specification */ +#define USB_DT_PIPE_USAGE 0x24 +/* From the USB 3.0 spec */ +#define USB_DT_SS_ENDPOINT_COMP 0x30 + +/* Conventional codes for class-specific descriptors. The convention is + * defined in the USB "Common Class" Spec (3.11). Individual class specs + * are authoritative for their usage, not the "common class" writeup. + */ +#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) +#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) +#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) +#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) +#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) + +/* All standard descriptors have these 2 fields at the beginning */ +struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE: Device descriptor */ +struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; +} __attribute__ ((packed)); + +#define USB_DT_DEVICE_SIZE 18 + + +/* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_STILL_IMAGE 6 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_CDC_DATA 0x0a +#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ +#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ +#define USB_CLASS_VIDEO 0x0e +#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_MISC 0xef +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +#define USB_SUBCLASS_VENDOR_SPEC 0xff + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ +struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; +} __attribute__ ((packed)); + +#define USB_DT_CONFIG_SIZE 9 + +/* from config descriptor bmAttributes */ +#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ +#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ +#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ +#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_STRING: String descriptor */ +struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wData[1]; /* UTF-16LE encoded */ +} __attribute__ ((packed)); + +/* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE: Interface descriptor */ +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + +#define USB_DT_INTERFACE_SIZE 9 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENDPOINT: Endpoint descriptor */ +struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; + + /* NOTE: these two are _only_ in audio endpoints. */ + /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ + __u8 bRefresh; + __u8 bSynchAddress; +} __attribute__ ((packed)); + +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 +#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 + +/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ +#define USB_ENDPOINT_INTRTYPE 0x30 +#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) +#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) + +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + +#define USB_ENDPOINT_USAGE_MASK 0x30 +#define USB_ENDPOINT_USAGE_DATA 0x00 +#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 +#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ + +/*-------------------------------------------------------------------------*/ + +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +/** + * usb_endpoint_type - get the endpoint's transfer type + * @epd: endpoint to be checked + * + * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according + * to @epd's transfer type. + */ +static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; +} + +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_control - check if the endpoint has control transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type control, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_control( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return __le16_to_cpu(epd->wMaxPacketSize); +} + +static inline int usb_endpoint_interrupt_type( + const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; +} + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ +struct usb_ss_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bmAttributes; + __le16 wBytesPerInterval; +} __attribute__ ((packed)); + +#define USB_DT_SS_EP_COMP_SIZE 6 + +/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ +static inline int +usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) +{ + int max_streams; + + if (!comp) + return 0; + + max_streams = comp->bmAttributes & 0x1f; + + if (!max_streams) + return 0; + + max_streams = 1 << max_streams; + + return max_streams; +} + +/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ +#define USB_SS_MULT(p) (1 + ((p) & 0x3)) + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ +struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_OTG (from OTG 1.0a supplement) */ +struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ +} __attribute__ ((packed)); + +/* from usb_otg_descriptor.bmAttributes */ +#define USB_OTG_SRP (1 << 0) +#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ +struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ +struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SECURITY: group of wireless security descriptors, including + * encryption types available for setting up a CC/association. + */ +struct usb_security_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumEncryptionTypes; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys + * may be retrieved. + */ +struct usb_key_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 tTKID[3]; + __u8 bReserved; + __u8 bKeyData[0]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ +struct usb_encryption_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEncryptionType; +#define USB_ENC_TYPE_UNSECURE 0 +#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ +#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ +#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ + __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ + __u8 bAuthKeyIndex; +} __attribute__((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_BOS: group of device-level capabilities */ +struct usb_bos_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumDeviceCaps; +} __attribute__((packed)); + +#define USB_DT_BOS_SIZE 5 +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ +struct usb_dev_cap_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; +} __attribute__((packed)); + +#define USB_CAP_TYPE_WIRELESS_USB 1 + +struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + + __u8 bmAttributes; +#define USB_WIRELESS_P2P_DRD (1 << 1) +#define USB_WIRELESS_BEACON_MASK (3 << 2) +#define USB_WIRELESS_BEACON_SELF (1 << 2) +#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) +#define USB_WIRELESS_BEACON_NONE (3 << 2) + __le16 wPHYRates; /* bit rates, Mbps */ +#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ +#define USB_WIRELESS_PHY_80 (1 << 1) +#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ +#define USB_WIRELESS_PHY_160 (1 << 3) +#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ +#define USB_WIRELESS_PHY_320 (1 << 5) +#define USB_WIRELESS_PHY_400 (1 << 6) +#define USB_WIRELESS_PHY_480 (1 << 7) + __u8 bmTFITXPowerInfo; /* TFI power levels */ + __u8 bmFFITXPowerInfo; /* FFI power levels */ + __le16 bmBandGroup; + __u8 bReserved; +} __attribute__((packed)); + +/* USB 2.0 Extension descriptor */ +#define USB_CAP_TYPE_EXT 2 + +struct usb_ext_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __le32 bmAttributes; +#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ +#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ +#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ +#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ +#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) +#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) +} __attribute__((packed)); + +#define USB_DT_USB_EXT_CAP_SIZE 7 + +/* + * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB + * specific device level capabilities + */ +#define USB_SS_CAP_TYPE 3 +struct usb_ss_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ + __le16 wSpeedSupported; +#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ +#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ +#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ +#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ + __u8 bFunctionalitySupport; + __u8 bU1devExitLat; + __le16 bU2DevExitLat; +} __attribute__((packed)); + +#define USB_DT_USB_SS_CAP_SIZE 10 + +/* + * Container ID Capability descriptor: Defines the instance unique ID used to + * identify the instance across all operating modes + */ +#define CONTAINER_ID_TYPE 4 +struct usb_ss_container_id_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 ContainerID[16]; /* 128-bit number */ +} __attribute__((packed)); + +#define USB_DT_USB_SS_CONTN_ID_SIZE 20 +/*-------------------------------------------------------------------------*/ + +/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with + * each endpoint descriptor for a wireless device + */ +struct usb_wireless_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bMaxSequence; + __le16 wMaxStreamDelay; + __le16 wOverTheAirPacketSize; + __u8 bOverTheAirInterval; + __u8 bmCompAttributes; +#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ +#define USB_ENDPOINT_SWITCH_NO 0 +#define USB_ENDPOINT_SWITCH_SWITCH 1 +#define USB_ENDPOINT_SWITCH_SCALE 2 +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless + * host and a device for connection set up, mutual authentication, and + * exchanging short lived session keys. The handshake depends on a CC. + */ +struct usb_handshake { + __u8 bMessageNumber; + __u8 bStatus; + __u8 tTKID[3]; + __u8 bReserved; + __u8 CDID[16]; + __u8 nonce[16]; + __u8 MIC[8]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). + * A CC may also be set up using non-wireless secure channels (including + * wired USB!), and some devices may support CCs with multiple hosts. + */ +struct usb_connection_context { + __u8 CHID[16]; /* persistent host id */ + __u8 CDID[16]; /* device id (unique w/in host context) */ + __u8 CK[16]; /* connection key */ +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB 2.0 defines three speeds, here's how Linux identifies them */ + +enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH, /* usb 2.0 */ + USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ + USB_SPEED_SUPER, /* usb 3.0 */ +}; + + +enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* chapter 9 and authentication (wireless) device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, /* wired */ + USB_STATE_RECONNECTING, /* auth */ + USB_STATE_UNAUTHENTICATED, /* auth */ + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + * At this level there's no difference between L1 and L2 + * suspend states. (L2 being original USB 1.1 suspend.) + */ +}; + +enum usb3_link_state { + USB3_LPM_U0 = 0, + USB3_LPM_U1, + USB3_LPM_U2, + USB3_LPM_U3 +}; + +/* + * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. + * 0xff means the parent hub will accept transitions to U1, but will not + * initiate a transition. + * + * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to + * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved + * values. + * + * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. + * 0xff means the parent hub will accept transitions to U2, but will not + * initiate a transition. + * + * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to + * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 + * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means + * 65.024ms. + */ +#define USB3_LPM_DISABLED 0x0 +#define USB3_LPM_U1_MAX_TIMEOUT 0x7F +#define USB3_LPM_U2_MAX_TIMEOUT 0xFE +#define USB3_LPM_DEVICE_INITIATED 0xFF + +struct usb_set_sel_req { + __u8 u1_sel; + __u8 u1_pel; + __le16 u2_sel; + __le16 u2_pel; +} __attribute__ ((packed)); + +/* + * The Set System Exit Latency control transfer provides one byte each for + * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each + * are two bytes long. + */ +#define USB3_LPM_MAX_U1_SEL_PEL 0xFF +#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF + +/*-------------------------------------------------------------------------*/ + +/* + * As per USB compliance update, a device that is actively drawing + * more than 100mA from USB must report itself as bus-powered in + * the GetStatus(DEVICE) call. + * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 + */ +#define USB_SELF_POWER_VBUS_MAX_DRAW 100 + +#endif /* _UAPI__LINUX_USB_CH9_H */ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h new file mode 100644 index 0000000..d6b0128 --- /dev/null +++ b/include/uapi/linux/usb/functionfs.h @@ -0,0 +1,169 @@ +#ifndef _UAPI__LINUX_FUNCTIONFS_H__ +#define _UAPI__LINUX_FUNCTIONFS_H__ + + +#include +#include + +#include + + +enum { + FUNCTIONFS_DESCRIPTORS_MAGIC = 1, + FUNCTIONFS_STRINGS_MAGIC = 2 +}; + + +#ifndef __KERNEL__ + +/* Descriptor of an non-audio endpoint */ +struct usb_endpoint_descriptor_no_audio { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; +} __attribute__((packed)); + + +/* + * All numbers must be in little endian order. + */ + +struct usb_functionfs_descs_head { + __le32 magic; + __le32 length; + __le32 fs_count; + __le32 hs_count; +} __attribute__((packed)); + +/* + * Descriptors format: + * + * | off | name | type | description | + * |-----+-----------+--------------+--------------------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | + * | 4 | length | LE32 | length of the whole data chunk | + * | 8 | fs_count | LE32 | number of full-speed descriptors | + * | 12 | hs_count | LE32 | number of high-speed descriptors | + * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | + * | | hs_descrs | Descriptor[] | list of high-speed descriptors | + * + * descs are just valid USB descriptors and have the following format: + * + * | off | name | type | description | + * |-----+-----------------+------+--------------------------| + * | 0 | bLength | U8 | length of the descriptor | + * | 1 | bDescriptorType | U8 | descriptor type | + * | 2 | payload | | descriptor's payload | + */ + +struct usb_functionfs_strings_head { + __le32 magic; + __le32 length; + __le32 str_count; + __le32 lang_count; +} __attribute__((packed)); + +/* + * Strings format: + * + * | off | name | type | description | + * |-----+------------+-----------------------+----------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | + * | 4 | length | LE32 | length of the data chunk | + * | 8 | str_count | LE32 | number of strings | + * | 12 | lang_count | LE32 | number of languages | + * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | + * + * For each language there is one stringtab entry (ie. there are lang_count + * stringtab entires). Each StringTab has following format: + * + * | off | name | type | description | + * |-----+---------+-------------------+------------------------------------| + * | 0 | lang | LE16 | language code | + * | 2 | strings | String[str_count] | array of strings in given language | + * + * For each string there is one strings entry (ie. there are str_count + * string entries). Each String is a NUL terminated string encoded in + * UTF-8. + */ + +#endif + + +/* + * Events are delivered on the ep0 file descriptor, when the user mode driver + * reads from this file descriptor after writing the descriptors. Don't + * stop polling this descriptor. + */ + +enum usb_functionfs_event_type { + FUNCTIONFS_BIND, + FUNCTIONFS_UNBIND, + + FUNCTIONFS_ENABLE, + FUNCTIONFS_DISABLE, + + FUNCTIONFS_SETUP, + + FUNCTIONFS_SUSPEND, + FUNCTIONFS_RESUME +}; + +/* NOTE: this structure must stay the same size and layout on + * both 32-bit and 64-bit kernels. + */ +struct usb_functionfs_event { + union { + /* SETUP: packet; DATA phase i/o precedes next event + *(setup.bmRequestType & USB_DIR_IN) flags direction */ + struct usb_ctrlrequest setup; + } __attribute__((packed)) u; + + /* enum usb_functionfs_event_type */ + __u8 type; + __u8 _pad[3]; +} __attribute__((packed)); + + +/* Endpoint ioctls */ +/* The same as in gadgetfs */ + +/* IN transfers may be reported to the gadget driver as complete + * when the fifo is loaded, before the host reads the data; + * OUT transfers may be reported to the host's "client" driver as + * complete when they're sitting in the FIFO unread. + * THIS returns how many bytes are "unclaimed" in the endpoint fifo + * (needed for precise fault handling, when the hardware allows it) + */ +#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) + +/* discards any unclaimed data in the fifo. */ +#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) + +/* resets endpoint halt+toggle; used to implement set_interface. + * some hardware (like pxa2xx) can't support this. + */ +#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) + +/* Specific for functionfs */ + +/* + * Returns reverse mapping of an interface. Called on EP0. If there + * is no such interface returns -EDOM. If function is not active + * returns -ENODEV. + */ +#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) + +/* + * Returns real bEndpointAddress of an endpoint. If function is not + * active returns -ENODEV. + */ +#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) + + + +#endif /* _UAPI__LINUX_FUNCTIONFS_H__ */ diff --git a/include/uapi/linux/usb/g_printer.h b/include/uapi/linux/usb/g_printer.h new file mode 100644 index 0000000..6178fde --- /dev/null +++ b/include/uapi/linux/usb/g_printer.h @@ -0,0 +1,35 @@ +/* + * g_printer.h -- Header file for USB Printer gadget driver + * + * Copyright (C) 2007 Craig W. Nadler + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_USB_G_PRINTER_H +#define __LINUX_USB_G_PRINTER_H + +#define PRINTER_NOT_ERROR 0x08 +#define PRINTER_SELECTED 0x10 +#define PRINTER_PAPER_EMPTY 0x20 + +/* The 'g' code is also used by gadgetfs ioctl requests. + * Don't add any colliding codes to either driver, and keep + * them in unique ranges (size 0x20 for now). + */ +#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) +#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) + +#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/include/uapi/linux/usb/gadgetfs.h b/include/uapi/linux/usb/gadgetfs.h new file mode 100644 index 0000000..0bb12e0 --- /dev/null +++ b/include/uapi/linux/usb/gadgetfs.h @@ -0,0 +1,88 @@ +/* + * Filesystem based user-mode API to USB Gadget controller hardware + * + * Other than ep0 operations, most things are done by read() and write() + * on endpoint files found in one directory. They are configured by + * writing descriptors, and then may be used for normal stream style + * i/o requests. When ep0 is configured, the device can enumerate; + * when it's closed, the device disconnects from usb. Operations on + * ep0 require ioctl() operations. + * + * Configuration and device descriptors get written to /dev/gadget/$CHIP, + * which may then be used to read usb_gadgetfs_event structs. The driver + * may activate endpoints as it handles SET_CONFIGURATION setup events, + * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT + * then performing data transfers by reading or writing. + */ + +#ifndef __LINUX_USB_GADGETFS_H +#define __LINUX_USB_GADGETFS_H + +#include +#include + +#include + +/* + * Events are delivered on the ep0 file descriptor, when the user mode driver + * reads from this file descriptor after writing the descriptors. Don't + * stop polling this descriptor. + */ + +enum usb_gadgetfs_event_type { + GADGETFS_NOP = 0, + + GADGETFS_CONNECT, + GADGETFS_DISCONNECT, + GADGETFS_SETUP, + GADGETFS_SUSPEND, + /* and likely more ! */ +}; + +/* NOTE: this structure must stay the same size and layout on + * both 32-bit and 64-bit kernels. + */ +struct usb_gadgetfs_event { + union { + /* NOP, DISCONNECT, SUSPEND: nothing + * ... some hardware can't report disconnection + */ + + /* CONNECT: just the speed */ + enum usb_device_speed speed; + + /* SETUP: packet; DATA phase i/o precedes next event + *(setup.bmRequestType & USB_DIR_IN) flags direction + * ... includes SET_CONFIGURATION, SET_INTERFACE + */ + struct usb_ctrlrequest setup; + } u; + enum usb_gadgetfs_event_type type; +}; + + +/* The 'g' code is also used by printer gadget ioctl requests. + * Don't add any colliding codes to either driver, and keep + * them in unique ranges (size 0x20 for now). + */ + +/* endpoint ioctls */ + +/* IN transfers may be reported to the gadget driver as complete + * when the fifo is loaded, before the host reads the data; + * OUT transfers may be reported to the host's "client" driver as + * complete when they're sitting in the FIFO unread. + * THIS returns how many bytes are "unclaimed" in the endpoint fifo + * (needed for precise fault handling, when the hardware allows it) + */ +#define GADGETFS_FIFO_STATUS _IO('g', 1) + +/* discards any unclaimed data in the fifo. */ +#define GADGETFS_FIFO_FLUSH _IO('g', 2) + +/* resets endpoint halt+toggle; used to implement set_interface. + * some hardware (like pxa2xx) can't support this. + */ +#define GADGETFS_CLEAR_HALT _IO('g', 3) + +#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/include/uapi/linux/usb/midi.h b/include/uapi/linux/usb/midi.h new file mode 100644 index 0000000..c8c52e3 --- /dev/null +++ b/include/uapi/linux/usb/midi.h @@ -0,0 +1,112 @@ +/* + * -- USB MIDI definitions. + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * This file holds USB constants and structures defined + * by the USB Device Class Definition for MIDI Devices. + * Comments below reference relevant sections of that document: + * + * http://www.usb.org/developers/devclass_docs/midi10.pdf + */ + +#ifndef __LINUX_USB_MIDI_H +#define __LINUX_USB_MIDI_H + +#include + +/* A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define USB_MS_HEADER 0x01 +#define USB_MS_MIDI_IN_JACK 0x02 +#define USB_MS_MIDI_OUT_JACK 0x03 +#define USB_MS_ELEMENT 0x04 + +/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */ +#define USB_MS_GENERAL 0x01 + +/* A.3 MS MIDI IN and OUT Jack Types */ +#define USB_MS_EMBEDDED 0x01 +#define USB_MS_EXTERNAL 0x02 + +/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */ +struct usb_ms_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __le16 bcdMSC; + __le16 wTotalLength; +} __attribute__ ((packed)); + +#define USB_DT_MS_HEADER_SIZE 7 + +/* 6.1.2.2 MIDI IN Jack Descriptor */ +struct usb_midi_in_jack_descriptor { + __u8 bLength; + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */ + __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ + __u8 bJackID; + __u8 iJack; +} __attribute__ ((packed)); + +#define USB_DT_MIDI_IN_SIZE 6 + +struct usb_midi_source_pin { + __u8 baSourceID; + __u8 baSourcePin; +} __attribute__ ((packed)); + +/* 6.1.2.3 MIDI OUT Jack Descriptor */ +struct usb_midi_out_jack_descriptor { + __u8 bLength; + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */ + __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ + __u8 bJackID; + __u8 bNrInputPins; /* p */ + struct usb_midi_source_pin pins[]; /* [p] */ + /*__u8 iJack; -- omitted due to variable-sized pins[] */ +} __attribute__ ((packed)); + +#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \ +struct usb_midi_out_jack_descriptor_##p { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bJackType; \ + __u8 bJackID; \ + __u8 bNrInputPins; \ + struct usb_midi_source_pin pins[p]; \ + __u8 iJack; \ +} __attribute__ ((packed)) + +/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */ +struct usb_ms_endpoint_descriptor { + __u8 bLength; /* 4+n */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* USB_MS_GENERAL */ + __u8 bNumEmbMIDIJack; /* n */ + __u8 baAssocJackID[]; /* [n] */ +} __attribute__ ((packed)); + +#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \ +struct usb_ms_endpoint_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bNumEmbMIDIJack; \ + __u8 baAssocJackID[n]; \ +} __attribute__ ((packed)) + +#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/uapi/linux/usb/tmc.h b/include/uapi/linux/usb/tmc.h new file mode 100644 index 0000000..c045ae1 --- /dev/null +++ b/include/uapi/linux/usb/tmc.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany + * Copyright (C) 2008 Novell, Inc. + * Copyright (C) 2008 Greg Kroah-Hartman + * + * This file holds USB constants defined by the USB Device Class + * Definition for Test and Measurement devices published by the USB-IF. + * + * It also has the ioctl definitions for the usbtmc kernel driver that + * userspace needs to know about. + */ + +#ifndef __LINUX_USB_TMC_H +#define __LINUX_USB_TMC_H + +/* USB TMC status values */ +#define USBTMC_STATUS_SUCCESS 0x01 +#define USBTMC_STATUS_PENDING 0x02 +#define USBTMC_STATUS_FAILED 0x80 +#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 +#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 +#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 + +/* USB TMC requests values */ +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 +#define USBTMC_REQUEST_INITIATE_CLEAR 5 +#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 +#define USBTMC_REQUEST_GET_CAPABILITIES 7 +#define USBTMC_REQUEST_INDICATOR_PULSE 64 + +/* Request values for USBTMC driver's ioctl entry point */ +#define USBTMC_IOC_NR 91 +#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) +#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) +#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) +#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) +#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) +#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) + +#endif diff --git a/include/uapi/linux/usb/video.h b/include/uapi/linux/usb/video.h new file mode 100644 index 0000000..3b3b95e --- /dev/null +++ b/include/uapi/linux/usb/video.h @@ -0,0 +1,568 @@ +/* + * USB Video Class definitions. + * + * Copyright (C) 2009 Laurent Pinchart + * + * This file holds USB constants and structures defined by the USB Device + * Class Definition for Video Devices. Unless otherwise stated, comments + * below reference relevant sections of the USB Video Class 1.1 specification + * available at + * + * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip + */ + +#ifndef __LINUX_USB_VIDEO_H +#define __LINUX_USB_VIDEO_H + +#include + +/* -------------------------------------------------------------------------- + * UVC constants + */ + +/* A.2. Video Interface Subclass Codes */ +#define UVC_SC_UNDEFINED 0x00 +#define UVC_SC_VIDEOCONTROL 0x01 +#define UVC_SC_VIDEOSTREAMING 0x02 +#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03 + +/* A.3. Video Interface Protocol Codes */ +#define UVC_PC_PROTOCOL_UNDEFINED 0x00 + +/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ +#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 +#define UVC_VC_HEADER 0x01 +#define UVC_VC_INPUT_TERMINAL 0x02 +#define UVC_VC_OUTPUT_TERMINAL 0x03 +#define UVC_VC_SELECTOR_UNIT 0x04 +#define UVC_VC_PROCESSING_UNIT 0x05 +#define UVC_VC_EXTENSION_UNIT 0x06 + +/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */ +#define UVC_VS_UNDEFINED 0x00 +#define UVC_VS_INPUT_HEADER 0x01 +#define UVC_VS_OUTPUT_HEADER 0x02 +#define UVC_VS_STILL_IMAGE_FRAME 0x03 +#define UVC_VS_FORMAT_UNCOMPRESSED 0x04 +#define UVC_VS_FRAME_UNCOMPRESSED 0x05 +#define UVC_VS_FORMAT_MJPEG 0x06 +#define UVC_VS_FRAME_MJPEG 0x07 +#define UVC_VS_FORMAT_MPEG2TS 0x0a +#define UVC_VS_FORMAT_DV 0x0c +#define UVC_VS_COLORFORMAT 0x0d +#define UVC_VS_FORMAT_FRAME_BASED 0x10 +#define UVC_VS_FRAME_FRAME_BASED 0x11 +#define UVC_VS_FORMAT_STREAM_BASED 0x12 + +/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */ +#define UVC_EP_UNDEFINED 0x00 +#define UVC_EP_GENERAL 0x01 +#define UVC_EP_ENDPOINT 0x02 +#define UVC_EP_INTERRUPT 0x03 + +/* A.8. Video Class-Specific Request Codes */ +#define UVC_RC_UNDEFINED 0x00 +#define UVC_SET_CUR 0x01 +#define UVC_GET_CUR 0x81 +#define UVC_GET_MIN 0x82 +#define UVC_GET_MAX 0x83 +#define UVC_GET_RES 0x84 +#define UVC_GET_LEN 0x85 +#define UVC_GET_INFO 0x86 +#define UVC_GET_DEF 0x87 + +/* A.9.1. VideoControl Interface Control Selectors */ +#define UVC_VC_CONTROL_UNDEFINED 0x00 +#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02 + +/* A.9.2. Terminal Control Selectors */ +#define UVC_TE_CONTROL_UNDEFINED 0x00 + +/* A.9.3. Selector Unit Control Selectors */ +#define UVC_SU_CONTROL_UNDEFINED 0x00 +#define UVC_SU_INPUT_SELECT_CONTROL 0x01 + +/* A.9.4. Camera Terminal Control Selectors */ +#define UVC_CT_CONTROL_UNDEFINED 0x00 +#define UVC_CT_SCANNING_MODE_CONTROL 0x01 +#define UVC_CT_AE_MODE_CONTROL 0x02 +#define UVC_CT_AE_PRIORITY_CONTROL 0x03 +#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07 +#define UVC_CT_FOCUS_AUTO_CONTROL 0x08 +#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a +#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c +#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e +#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10 +#define UVC_CT_PRIVACY_CONTROL 0x11 + +/* A.9.5. Processing Unit Control Selectors */ +#define UVC_PU_CONTROL_UNDEFINED 0x00 +#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define UVC_PU_BRIGHTNESS_CONTROL 0x02 +#define UVC_PU_CONTRAST_CONTROL 0x03 +#define UVC_PU_GAIN_CONTROL 0x04 +#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define UVC_PU_HUE_CONTROL 0x06 +#define UVC_PU_SATURATION_CONTROL 0x07 +#define UVC_PU_SHARPNESS_CONTROL 0x08 +#define UVC_PU_GAMMA_CONTROL 0x09 +#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define UVC_PU_HUE_AUTO_CONTROL 0x10 +#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12 + +/* A.9.7. VideoStreaming Interface Control Selectors */ +#define UVC_VS_CONTROL_UNDEFINED 0x00 +#define UVC_VS_PROBE_CONTROL 0x01 +#define UVC_VS_COMMIT_CONTROL 0x02 +#define UVC_VS_STILL_PROBE_CONTROL 0x03 +#define UVC_VS_STILL_COMMIT_CONTROL 0x04 +#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define UVC_VS_SYNC_DELAY_CONTROL 0x09 + +/* B.1. USB Terminal Types */ +#define UVC_TT_VENDOR_SPECIFIC 0x0100 +#define UVC_TT_STREAMING 0x0101 + +/* B.2. Input Terminal Types */ +#define UVC_ITT_VENDOR_SPECIFIC 0x0200 +#define UVC_ITT_CAMERA 0x0201 +#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202 + +/* B.3. Output Terminal Types */ +#define UVC_OTT_VENDOR_SPECIFIC 0x0300 +#define UVC_OTT_DISPLAY 0x0301 +#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 + +/* B.4. External Terminal Types */ +#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define UVC_COMPOSITE_CONNECTOR 0x0401 +#define UVC_SVIDEO_CONNECTOR 0x0402 +#define UVC_COMPONENT_CONNECTOR 0x0403 + +/* 2.4.2.2. Status Packet Type */ +#define UVC_STATUS_TYPE_CONTROL 1 +#define UVC_STATUS_TYPE_STREAMING 2 + +/* 2.4.3.3. Payload Header Information */ +#define UVC_STREAM_EOH (1 << 7) +#define UVC_STREAM_ERR (1 << 6) +#define UVC_STREAM_STI (1 << 5) +#define UVC_STREAM_RES (1 << 4) +#define UVC_STREAM_SCR (1 << 3) +#define UVC_STREAM_PTS (1 << 2) +#define UVC_STREAM_EOF (1 << 1) +#define UVC_STREAM_FID (1 << 0) + +/* 4.1.2. Control Capabilities */ +#define UVC_CONTROL_CAP_GET (1 << 0) +#define UVC_CONTROL_CAP_SET (1 << 1) +#define UVC_CONTROL_CAP_DISABLED (1 << 2) +#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) +#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4) + +/* ------------------------------------------------------------------------ + * UVC structures + */ + +/* All UVC descriptors have these 3 fields at the beginning */ +struct uvc_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; +} __attribute__((packed)); + +/* 3.7.2. Video Control Interface Header Descriptor */ +struct uvc_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u16 bcdUVC; + __u16 wTotalLength; + __u32 dwClockFrequency; + __u8 bInCollection; + __u8 baInterfaceNr[]; +} __attribute__((__packed__)); + +#define UVC_DT_HEADER_SIZE(n) (12+(n)) + +#define UVC_HEADER_DESCRIPTOR(n) \ + uvc_header_descriptor_##n + +#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \ +struct UVC_HEADER_DESCRIPTOR(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u16 bcdUVC; \ + __u16 wTotalLength; \ + __u32 dwClockFrequency; \ + __u8 bInCollection; \ + __u8 baInterfaceNr[n]; \ +} __attribute__ ((packed)) + +/* 3.7.2.1. Input Terminal Descriptor */ +struct uvc_input_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 iTerminal; +} __attribute__((__packed__)); + +#define UVC_DT_INPUT_TERMINAL_SIZE 8 + +/* 3.7.2.2. Output Terminal Descriptor */ +struct uvc_output_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 bSourceID; + __u8 iTerminal; +} __attribute__((__packed__)); + +#define UVC_DT_OUTPUT_TERMINAL_SIZE 9 + +/* 3.7.2.3. Camera Terminal Descriptor */ +struct uvc_camera_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 iTerminal; + __u16 wObjectiveFocalLengthMin; + __u16 wObjectiveFocalLengthMax; + __u16 wOcularFocalLength; + __u8 bControlSize; + __u8 bmControls[3]; +} __attribute__((__packed__)); + +#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n)) + +/* 3.7.2.4. Selector Unit Descriptor */ +struct uvc_selector_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 bNrInPins; + __u8 baSourceID[0]; + __u8 iSelector; +} __attribute__((__packed__)); + +#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n)) + +#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ + uvc_selector_unit_descriptor_##n + +#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ +struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bUnitID; \ + __u8 bNrInPins; \ + __u8 baSourceID[n]; \ + __u8 iSelector; \ +} __attribute__ ((packed)) + +/* 3.7.2.5. Processing Unit Descriptor */ +struct uvc_processing_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 bSourceID; + __u16 wMaxMultiplier; + __u8 bControlSize; + __u8 bmControls[2]; + __u8 iProcessing; +} __attribute__((__packed__)); + +#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) + +/* 3.7.2.6. Extension Unit Descriptor */ +struct uvc_extension_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 guidExtensionCode[16]; + __u8 bNumControls; + __u8 bNrInPins; + __u8 baSourceID[0]; + __u8 bControlSize; + __u8 bmControls[0]; + __u8 iExtension; +} __attribute__((__packed__)); + +#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n)) + +#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ + uvc_extension_unit_descriptor_##p_##n + +#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ +struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bUnitID; \ + __u8 guidExtensionCode[16]; \ + __u8 bNumControls; \ + __u8 bNrInPins; \ + __u8 baSourceID[p]; \ + __u8 bControlSize; \ + __u8 bmControls[n]; \ + __u8 iExtension; \ +} __attribute__ ((packed)) + +/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */ +struct uvc_control_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u16 wMaxTransferSize; +} __attribute__((__packed__)); + +#define UVC_DT_CONTROL_ENDPOINT_SIZE 5 + +/* 3.9.2.1. Input Header Descriptor */ +struct uvc_input_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bNumFormats; + __u16 wTotalLength; + __u8 bEndpointAddress; + __u8 bmInfo; + __u8 bTerminalLink; + __u8 bStillCaptureMethod; + __u8 bTriggerSupport; + __u8 bTriggerUsage; + __u8 bControlSize; + __u8 bmaControls[]; +} __attribute__((__packed__)); + +#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p)) + +#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ + uvc_input_header_descriptor_##n_##p + +#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ +struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bNumFormats; \ + __u16 wTotalLength; \ + __u8 bEndpointAddress; \ + __u8 bmInfo; \ + __u8 bTerminalLink; \ + __u8 bStillCaptureMethod; \ + __u8 bTriggerSupport; \ + __u8 bTriggerUsage; \ + __u8 bControlSize; \ + __u8 bmaControls[p][n]; \ +} __attribute__ ((packed)) + +/* 3.9.2.2. Output Header Descriptor */ +struct uvc_output_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bNumFormats; + __u16 wTotalLength; + __u8 bEndpointAddress; + __u8 bTerminalLink; + __u8 bControlSize; + __u8 bmaControls[]; +} __attribute__((__packed__)); + +#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p)) + +#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ + uvc_output_header_descriptor_##n_##p + +#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ +struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bNumFormats; \ + __u16 wTotalLength; \ + __u8 bEndpointAddress; \ + __u8 bTerminalLink; \ + __u8 bControlSize; \ + __u8 bmaControls[p][n]; \ +} __attribute__ ((packed)) + +/* 3.9.2.6. Color matching descriptor */ +struct uvc_color_matching_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bColorPrimaries; + __u8 bTransferCharacteristics; + __u8 bMatrixCoefficients; +} __attribute__((__packed__)); + +#define UVC_DT_COLOR_MATCHING_SIZE 6 + +/* 4.3.1.1. Video Probe and Commit Controls */ +struct uvc_streaming_control { + __u16 bmHint; + __u8 bFormatIndex; + __u8 bFrameIndex; + __u32 dwFrameInterval; + __u16 wKeyFrameRate; + __u16 wPFrameRate; + __u16 wCompQuality; + __u16 wCompWindowSize; + __u16 wDelay; + __u32 dwMaxVideoFrameSize; + __u32 dwMaxPayloadTransferSize; + __u32 dwClockFrequency; + __u8 bmFramingInfo; + __u8 bPreferedVersion; + __u8 bMinVersion; + __u8 bMaxVersion; +} __attribute__((__packed__)); + +/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */ +struct uvc_format_uncompressed { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFormatIndex; + __u8 bNumFrameDescriptors; + __u8 guidFormat[16]; + __u8 bBitsPerPixel; + __u8 bDefaultFrameIndex; + __u8 bAspectRatioX; + __u8 bAspectRatioY; + __u8 bmInterfaceFlags; + __u8 bCopyProtect; +} __attribute__((__packed__)); + +#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27 + +/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */ +struct uvc_frame_uncompressed { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u32 dwDefaultFrameInterval; + __u8 bFrameIntervalType; + __u32 dwFrameInterval[]; +} __attribute__((__packed__)); + +#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n)) + +#define UVC_FRAME_UNCOMPRESSED(n) \ + uvc_frame_uncompressed_##n + +#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \ +struct UVC_FRAME_UNCOMPRESSED(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bFrameIndex; \ + __u8 bmCapabilities; \ + __u16 wWidth; \ + __u16 wHeight; \ + __u32 dwMinBitRate; \ + __u32 dwMaxBitRate; \ + __u32 dwMaxVideoFrameBufferSize; \ + __u32 dwDefaultFrameInterval; \ + __u8 bFrameIntervalType; \ + __u32 dwFrameInterval[n]; \ +} __attribute__ ((packed)) + +/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */ +struct uvc_format_mjpeg { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFormatIndex; + __u8 bNumFrameDescriptors; + __u8 bmFlags; + __u8 bDefaultFrameIndex; + __u8 bAspectRatioX; + __u8 bAspectRatioY; + __u8 bmInterfaceFlags; + __u8 bCopyProtect; +} __attribute__((__packed__)); + +#define UVC_DT_FORMAT_MJPEG_SIZE 11 + +/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */ +struct uvc_frame_mjpeg { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u32 dwDefaultFrameInterval; + __u8 bFrameIntervalType; + __u32 dwFrameInterval[]; +} __attribute__((__packed__)); + +#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n)) + +#define UVC_FRAME_MJPEG(n) \ + uvc_frame_mjpeg_##n + +#define DECLARE_UVC_FRAME_MJPEG(n) \ +struct UVC_FRAME_MJPEG(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bFrameIndex; \ + __u8 bmCapabilities; \ + __u16 wWidth; \ + __u16 wHeight; \ + __u32 dwMinBitRate; \ + __u32 dwMaxBitRate; \ + __u32 dwMaxVideoFrameBufferSize; \ + __u32 dwDefaultFrameInterval; \ + __u8 bFrameIntervalType; \ + __u32 dwFrameInterval[n]; \ +} __attribute__ ((packed)) + +#endif /* __LINUX_USB_VIDEO_H */ + -- cgit v0.10.2 From 5c5b06c3c09510a2e90f6453266823dc6f940c70 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 07:49:31 +0000 Subject: ARM: kprobes: make more tests conditional The mls instruction is not available in ARMv6K or below, so we should make the test conditional on at least ARMv7. ldrexd/strexd are available in ARMv6K or ARMv7, which we can test by checking the CONFIG_CPU_32v6K symbol. /tmp/ccuMTZ8D.s: Assembler messages: /tmp/ccuMTZ8D.s:22188: Error: selected processor does not support ARM mode `mls r0,r1,r2,r3' /tmp/ccuMTZ8D.s:22222: Error: selected processor does not support ARM mode `mlshi r7,r8,r9,r10' /tmp/ccuMTZ8D.s:22252: Error: selected processor does not support ARM mode `mls lr,r1,r2,r13' Signed-off-by: Arnd Bergmann Acked-by: Jon Medhurst Acked-by: Nicolas Pitre Cc: Russell King Cc: Leif Lindholm diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 38c1a3b..8393129 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") TEST_UNSUPPORTED(".word 0xe0500090 @ undef") TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") +#endif +#if __LINUX_ARM_ARCH__ >= 7 TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") @@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ #if __LINUX_ARM_ARCH__ >= 6 TEST_UNSUPPORTED("ldrex r2, [sp]") +#endif +#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K) TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") TEST_UNSUPPORTED("strexb r0, r2, [sp]") -- cgit v0.10.2 From 05c769823cd0648fc56c8f0289c5f14d465389a8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 07:49:26 +0000 Subject: ARM: export set_irq_flags The recently added Emma Mobile GPIO driver calls set_irq_flags and irq_set_chip_and_handler for the interrupts it exports and it can be built as a module, which currently fails with ERROR: "set_irq_flags" [drivers/gpio/gpio-em.ko] undefined! We either need to replace the call to set_irq_flags with something else or export that function. This patch does the latter. Signed-off-by: Arnd Bergmann Acked-by: Thomas Gleixner Cc: Magnus Damm Cc: Linus Walleij Cc: Rafael J. Wysocki Cc: Russell King diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 16cedb4..8961650 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) /* Order is clear bits in "clr" then set bits in "set" */ irq_modify_status(irq, clr, set & ~clr); } +EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { -- cgit v0.10.2 From 31d2a638a91340d00502d397e558271f516b4f17 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 7 Oct 2012 20:35:18 +0000 Subject: ARM: Fix another build warning in arch/arm/mm/alignment.c One such warning was recently fixed in a761cebf "ARM: Fix build warning in arch/arm/mm/alignment.c" but only for the thumb2 case, this fixes the other half. arch/arm/mm/alignment.c: In function 'do_alignment': arch/arm/mm/alignment.c:327:15: error: 'offset.un' may be used uninitialized in this function arch/arm/mm/alignment.c:748:21: note: 'offset.un' was declared here Signed-off-by: Arnd Bergmann Cc: Russell King diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b9f60eb..023f4437 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb2_32b) { offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - } else + } else { + offset.un = 0; handler = do_alignment_ldmstm; + } break; default: -- cgit v0.10.2 From f3accb122f2c758494a6db3b9e9a8cd62aafcf83 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 1 Oct 2012 14:47:31 +0000 Subject: ARM: export default read_current_timer read_current_timer is used by get_cycles since "ARM: 7538/1: delay: add registration mechanism for delay timer sources", and get_cycles can be used by device drivers in loadable modules, so it has to be exported. Without this patch, building imote2_defconfig fails with ERROR: "read_current_timer" [crypto/tcrypt.ko] undefined! Signed-off-by: Arnd Bergmann Cc: Stephen Boyd Cc: Jonathan Austin Cc: Will Deacon Cc: Russell King diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 9d0a300..0dc5385 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val) *timer_val = delay_timer->read_current_timer(); return 0; } +EXPORT_SYMBOL_GPL(read_current_timer); static void __timer_delay(unsigned long cycles) { -- cgit v0.10.2 From f880b67dcbdedb49453f88d2ccb1a0937b046d82 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 9 Oct 2012 10:33:52 +0000 Subject: ARM: Xen: fix initial build problems * The XEN_BALLOON code requires the balloon infrastructure that is not getting built on ARM. * The tmem hypercall is not available on ARM * ARMv6 does not support cmpxchg on 16-bit words that are used in the Xen grant table code, so we must ensure that Xen support is only built on ARMv7-only kernels not combined ARMv6/v7 kernels. * sys-hypervisor.c needs to include linux/err.h in order to use the IS_ERR/PTR_ERR/ERR_PTR family of functions. Signed-off-by: Arnd Bergmann Acked-by: Ian Campbell Cc: Stefano Stabellini Cc: Konrad Rzeszutek Wilk Cc: Jeremy Fitzhardinge Cc: xen-devel@lists.xensource.com diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d2f7f5..e1d6ab2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1846,6 +1846,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" depends on EXPERIMENTAL && ARM && OF + depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index d4dffcd..126d8ce 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -3,6 +3,7 @@ menu "Xen driver support" config XEN_BALLOON bool "Xen memory balloon driver" + depends on !ARM default y help The balloon driver allows the Xen domain to request more memory from @@ -145,6 +146,7 @@ config SWIOTLB_XEN config XEN_TMEM bool + depends on !ARM default y if (CLEANCACHE || FRONTSWAP) help Shim to interface in-kernel Transcendent Memory hooks diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c index 5e5ad7e2..66a0a14 100644 --- a/drivers/xen/sys-hypervisor.c +++ b/drivers/xen/sys-hypervisor.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 91802a8ef410810db58907d2ea4c4adc00ef4688 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 10 Aug 2012 11:12:20 +0000 Subject: ARM: pass -marm to gcc by default for both C and assembler The Linaro cross toolchain and probably others nowadays default to building in THUMB2 mode. When building a kernel for a CPU that does not support THUMB2, the compiler complains about incorrect flags. We can work around this by setting -marm for all non-T2 builds. -marm was passed unconditionally for C files previously, but nothing was passed to the gcc frontend when processing .S files, resulting in a warning. The assembler never defaults to ARM unless -Wa,-mthumb is supplied explicitly, so the files were still assembled correctly. This patch makes sure that -marm is passed for .S files too, and also avoids the redundant gcc -marm -mthumb in Thumb kernels. Without this patch, building assabet_defconfig results in: usr/initramfs_data.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] arch/arm/nwfpe/entry.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] firmware/cis/PCMLM28.cis.gen.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] (and many more) Signed-off-by: Arnd Bergmann Acked-by: Nicolas Pitre Acked-by: Dave Martin Cc: Russell King diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f023e3a..5f914fc 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -21,8 +21,6 @@ endif OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe -# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: -KBUILD_CFLAGS +=$(call cc-option,-marm,) # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) @@ -105,17 +103,20 @@ endif ifeq ($(CONFIG_THUMB2_KERNEL),y) AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) -CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) -AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb +CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) CFLAGS_MODULE +=-fno-optimize-sibling-calls endif +else +CFLAGS_ISA :=$(call cc-option,-marm,) +AFLAGS_ISA :=$(CFLAGS_ISA) endif # Need -Uarm for gcc < 3.x -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ -- cgit v0.10.2 From edc88ceb0c7d285b9f58bc29a638cd8163b59989 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 12:16:16 +0000 Subject: ARM: be really quiet when building with 'make -s' Sometimes we want the kernel build process to only print messages on errors, e.g. in automated build testing. This uses the "kecho" macro that the build system provides to hide a few informational messages. Nothing changes for a regular "make" or "make V=1". Without this patch, building any ARM kernel results in: Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Signed-off-by: Arnd Bergmann Acked-by: Nicolas Pitre Cc: Russell King Cc: Catalin Marinas Cc: Michal Marek diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 3fdab01..f2aa09e 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @echo ' Image $@ is ready' + $(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 635cb18..cd60a81 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - @echo ' Generating $@' + $(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } -- cgit v0.10.2 From f6d5d8a5ed60c726354605877e8f8214fb11cc02 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 13:18:37 +0000 Subject: ARM: binfmt_flat: unused variable 'persistent' The flat_get_addr_from_rp() macro does not use the 'persistent' argument on ARM, causing a harmless compiler warning. A cast to void removes that warning. Without this patch, building at91x40_defconfig results in: fs/binfmt_flat.c: In function 'load_flat_file': fs/binfmt_flat.c:746:17: warning: unused variable 'persistent' [-Wunused-variable] Signed-off-by: Arnd Bergmann Acked-by: Greg Ungerer Cc: Russell King Cc: Bryan Wu diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 59426a4..e847d23 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -8,7 +8,7 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp)) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) 0 -- cgit v0.10.2 From 8e7fc18b5eacc37b6e6fcf486ec4eafbfef91738 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 13:18:46 +0000 Subject: ARM: warnings in arch/arm/include/asm/uaccess.h On NOMMU ARM, the __addr_ok() and __range_ok() macros do not evaluate their arguments, which may lead to harmless build warnings in some code where the variables are not used otherwise. Adding a cast to void gets rid of the warning and does not make any semantic changes. Without this patch, building at91x40_defconfig results in: fs/read_write.c: In function 'rw_copy_check_uvector': fs/read_write.c:684:9: warning: unused variable 'buf' [-Wunused-variable] Signed-off-by: Arnd Bergmann Acked-by: Greg Ungerer Cc: Russell King diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 77bd79f..7e1f760 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long); #define USER_DS KERNEL_DS #define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) +#define __addr_ok(addr) ((void)(addr),1) +#define __range_ok(addr,size) ((void)(addr),0) #define get_fs() (KERNEL_DS) static inline void set_fs(mm_segment_t fs) -- cgit v0.10.2 From ea065f13cc0a037b55698bb1021ea0927d0046d1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 16:26:31 +0000 Subject: SCSI: ARM: ncr5380/oak uses no interrupts The ncr5380 driver is included by multiple board specific drivers, which may or may not use the interrupt handler. The oak variant doesn't, and should set the DONT_USE_INTR macro. Without this patch, building rpc_defconfig results in: drivers/scsi/arm/../NCR5380.c:1160:20: warning: 'oakscsi_intr' defined but not used [-Wunused-function] Signed-off-by: Arnd Bergmann Cc: Russell King Cc: "James E.J. Bottomley" Cc: linux-arm-kernel@lists.infradead.org Cc: linux-scsi@vger.kernel.org diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c index d25f944..fc6a5aa 100644 --- a/drivers/scsi/arm/oak.c +++ b/drivers/scsi/arm/oak.c @@ -21,6 +21,7 @@ /*#define PSEUDO_DMA*/ #define OAKSCSI_PUBLIC_RELEASE 1 +#define DONT_USE_INTR #define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata) #define NCR5380_local_declare() void __iomem *_base -- cgit v0.10.2 From 48968177312e01737c018fdb2430b703831cbc2e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 16:26:27 +0000 Subject: SCSI: ARM: make fas216_dumpinfo function conditional The fas216_dumpinfo function is only used by __fas216_checkmagic, which is conditionally compiled, so we should put both functions inside of the same #ifdef. Without this patch, building rpc_defconfig results in: drivers/scsi/arm/fas216.c:182:13: warning: 'fas216_dumpinfo' defined but not used [-Wunused-function] Signed-off-by: Arnd Bergmann Cc: Russell King Cc: "James E.J. Bottomley" Cc: linux-arm-kernel@lists.infradead.org Cc: linux-scsi@vger.kernel.org diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 6206a66..737554c 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -179,6 +179,7 @@ static void print_SCp(struct scsi_pointer *SCp, const char *prefix, const char * SCp->buffers_residual, suffix); } +#ifdef CHECK_STRUCTURE static void fas216_dumpinfo(FAS216_Info *info) { static int used = 0; @@ -223,7 +224,6 @@ static void fas216_dumpinfo(FAS216_Info *info) info->internal_done, info->magic_end); } -#ifdef CHECK_STRUCTURE static void __fas216_checkmagic(FAS216_Info *info, const char *func) { int corruption = 0; -- cgit v0.10.2 From baaf1dd491433a78826150aff7411015de7e9b65 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 5 Aug 2012 15:00:58 +0000 Subject: mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN The definition of ARCH_SLAB_MINALIGN is architecture dependent and can be either of type size_t or int. Comparing that value with ARCH_KMALLOC_MINALIGN can cause harmless warnings on platforms where they are different. Since both are always small positive integer numbers, using the size_t type to compare them is safe and gets rid of the warning. Without this patch, building ARM collie_defconfig results in: mm/slob.c: In function '__kmalloc_node': mm/slob.c:431:152: warning: comparison of distinct pointer types lacks a cast [enabled by default] mm/slob.c: In function 'kfree': mm/slob.c:484:153: warning: comparison of distinct pointer types lacks a cast [enabled by default] mm/slob.c: In function 'ksize': mm/slob.c:503:153: warning: comparison of distinct pointer types lacks a cast [enabled by default] Signed-off-by: Arnd Bergmann Acked-by: Christoph Lameter Cc: Pekka Enberg diff --git a/mm/slob.c b/mm/slob.c index 45d4ca7..497c55e 100644 --- a/mm/slob.c +++ b/mm/slob.c @@ -428,7 +428,7 @@ out: void *__kmalloc_node(size_t size, gfp_t gfp, int node) { unsigned int *m; - int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN); + int align = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN); void *ret; gfp &= gfp_allowed_mask; @@ -481,7 +481,7 @@ void kfree(const void *block) sp = virt_to_page(block); if (PageSlab(sp)) { - int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN); + int align = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN); unsigned int *m = (unsigned int *)(block - align); slob_free(m, *m + align); } else @@ -500,7 +500,7 @@ size_t ksize(const void *block) sp = virt_to_page(block); if (PageSlab(sp)) { - int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN); + int align = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN); unsigned int *m = (unsigned int *)(block - align); return SLOB_UNITS(*m) * SLOB_UNIT; } else -- cgit v0.10.2 From 8855e49b64668463d0db2f0deca7b517fdb63eee Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 21:41:34 +0000 Subject: USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit The __devinit section is going away soon, but while it's still there, we get a correct warning about ehci_orion_conf_mbus_windows being discarded before its caller, so it should be marked __devinit rather than __init. Without this patch, building dove_defconfig results in: WARNING: drivers/usb/host/built-in.o(.devinit.text+0x8a4): Section mismatch in reference from the function ehci_orion_drv_probe() to the function .init.text:ehci_orion_conf_mbus_windows() The function __devinit ehci_orion_drv_probe() references a function __init ehci_orion_conf_mbus_windows(). If ehci_orion_conf_mbus_windows is only used by ehci_orion_drv_probe then annotate ehci_orion_conf_mbus_windows with a matching annotation. Signed-off-by: Arnd Bergmann Acked-by: Alan Stern Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 8892d36..1f5dd5e 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -160,7 +160,7 @@ static const struct hc_driver ehci_orion_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; -static void __init +static void __devinit ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, const struct mbus_dram_target_info *dram) { -- cgit v0.10.2 From aa9660196b250b850c9d06046c9f3b1eb965a708 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Mon, 1 Oct 2012 16:50:54 -0300 Subject: ext3: fix possible non-initialized variable on htree_dirblock_to_tree() This is a backport of ext4 commit 90b0a9732 which fixes a possible non-initialized variable on htree_dirblock_to_tree(). Ext3 has the same non initialized variable, but, in any case it will be initialized by ext3_get_blocks_handle(), which will avoid the bug to be triggered, but, the non-initialized variable by htree_dirblock_to_tree() is still a bug. Signed-off-by: Carlos Maiolino Signed-off-by: Jan Kara diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 8f4fdda..7f6c938 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -559,7 +559,7 @@ static int htree_dirblock_to_tree(struct file *dir_file, { struct buffer_head *bh; struct ext3_dir_entry_2 *de, *top; - int err, count = 0; + int err = 0, count = 0; dxtrace(printk("In htree dirblock_to_tree: block %d\n", block)); if (!(bh = ext3_bread (NULL, dir, block, 0, &err))) -- cgit v0.10.2 From c3d59ad6ab0b3d01c10f326bbc9b089424a3a5c4 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Tue, 2 Oct 2012 23:59:23 -0300 Subject: ext3: ext3_bread usage audit This is the ext3 version of the same patch applied to Ext4, where such goal is to audit the usage of ext3_bread() due a possible misinterpretion of its return value. Focused on directory blocks, a NULL value returned from ext3_bread() means a hole, which cannot exist into a directory inode. It can pass undetected after a fix in an uninitialized error variable. The (now) initialized variable into ext3_getblk() may lead to a zero'ed return value of ext3_bread() to its callers, which can make the caller do not detect the hole in the directory inode. This patch creates a new wrapper function ext3_dir_bread() which checks for holes properly, reports error, and returns EIO in that case. Signed-off-by: Carlos Maiolino Signed-off-by: Jan Kara diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 7f6c938..890b894 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -46,8 +46,7 @@ static struct buffer_head *ext3_append(handle_t *handle, *block = inode->i_size >> inode->i_sb->s_blocksize_bits; - bh = ext3_bread(handle, inode, *block, 1, err); - if (bh) { + if ((bh = ext3_dir_bread(handle, inode, *block, 1, err))) { inode->i_size += inode->i_sb->s_blocksize; EXT3_I(inode)->i_disksize = inode->i_size; *err = ext3_journal_get_write_access(handle, bh); @@ -339,8 +338,10 @@ dx_probe(struct qstr *entry, struct inode *dir, u32 hash; frame->bh = NULL; - if (!(bh = ext3_bread (NULL,dir, 0, 0, err))) + if (!(bh = ext3_dir_bread(NULL, dir, 0, 0, err))) { + *err = ERR_BAD_DX_DIR; goto fail; + } root = (struct dx_root *) bh->b_data; if (root->info.hash_version != DX_HASH_TEA && root->info.hash_version != DX_HASH_HALF_MD4 && @@ -436,8 +437,10 @@ dx_probe(struct qstr *entry, struct inode *dir, frame->entries = entries; frame->at = at; if (!indirect--) return frame; - if (!(bh = ext3_bread (NULL,dir, dx_get_block(at), 0, err))) + if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(at), 0, err))) { + *err = ERR_BAD_DX_DIR; goto fail2; + } at = entries = ((struct dx_node *) bh->b_data)->entries; if (dx_get_limit(entries) != dx_node_limit (dir)) { ext3_warning(dir->i_sb, __func__, @@ -535,8 +538,8 @@ static int ext3_htree_next_block(struct inode *dir, __u32 hash, * block so no check is necessary */ while (num_frames--) { - if (!(bh = ext3_bread(NULL, dir, dx_get_block(p->at), - 0, &err))) + if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(p->at), + 0, &err))) return err; /* Failure */ p++; brelse (p->bh); @@ -562,7 +565,8 @@ static int htree_dirblock_to_tree(struct file *dir_file, int err = 0, count = 0; dxtrace(printk("In htree dirblock_to_tree: block %d\n", block)); - if (!(bh = ext3_bread (NULL, dir, block, 0, &err))) + + if (!(bh = ext3_dir_bread(NULL, dir, block, 0, &err))) return err; de = (struct ext3_dir_entry_2 *) bh->b_data; @@ -976,7 +980,7 @@ static struct buffer_head * ext3_dx_find_entry(struct inode *dir, return NULL; do { block = dx_get_block(frame->at); - if (!(bh = ext3_bread (NULL,dir, block, 0, err))) + if (!(bh = ext3_dir_bread (NULL, dir, block, 0, err))) goto errout; retval = search_dirblock(bh, dir, entry, @@ -1458,9 +1462,9 @@ static int ext3_add_entry (handle_t *handle, struct dentry *dentry, } blocks = dir->i_size >> sb->s_blocksize_bits; for (block = 0; block < blocks; block++) { - bh = ext3_bread(handle, dir, block, 0, &retval); - if(!bh) + if (!(bh = ext3_dir_bread(handle, dir, block, 0, &retval))) return retval; + retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh); if (retval != -ENOSPC) return retval; @@ -1500,7 +1504,7 @@ static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, entries = frame->entries; at = frame->at; - if (!(bh = ext3_bread(handle,dir, dx_get_block(frame->at), 0, &err))) + if (!(bh = ext3_dir_bread(handle, dir, dx_get_block(frame->at), 0, &err))) goto cleanup; BUFFER_TRACE(bh, "get_write_access"); @@ -1790,8 +1794,7 @@ retry: inode->i_op = &ext3_dir_inode_operations; inode->i_fop = &ext3_dir_operations; inode->i_size = EXT3_I(inode)->i_disksize = inode->i_sb->s_blocksize; - dir_block = ext3_bread (handle, inode, 0, 1, &err); - if (!dir_block) + if (!(dir_block = ext3_dir_bread(handle, inode, 0, 1, &err))) goto out_clear_inode; BUFFER_TRACE(dir_block, "get_write_access"); @@ -1859,7 +1862,7 @@ static int empty_dir (struct inode * inode) sb = inode->i_sb; if (inode->i_size < EXT3_DIR_REC_LEN(1) + EXT3_DIR_REC_LEN(2) || - !(bh = ext3_bread (NULL, inode, 0, 0, &err))) { + !(bh = ext3_dir_bread(NULL, inode, 0, 0, &err))) { if (err) ext3_error(inode->i_sb, __func__, "error %d reading directory #%lu offset 0", @@ -1890,9 +1893,8 @@ static int empty_dir (struct inode * inode) (void *) de >= (void *) (bh->b_data+sb->s_blocksize)) { err = 0; brelse (bh); - bh = ext3_bread (NULL, inode, - offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err); - if (!bh) { + if (!(bh = ext3_dir_bread (NULL, inode, + offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err))) { if (err) ext3_error(sb, __func__, "error %d reading directory" @@ -2388,7 +2390,7 @@ static int ext3_rename (struct inode * old_dir, struct dentry *old_dentry, goto end_rename; } retval = -EIO; - dir_bh = ext3_bread (handle, old_inode, 0, 0, &retval); + dir_bh = ext3_dir_bread(handle, old_inode, 0, 0, &retval); if (!dir_bh) goto end_rename; if (le32_to_cpu(PARENT_INO(dir_bh->b_data)) != old_dir->i_ino) diff --git a/fs/ext3/namei.h b/fs/ext3/namei.h index f2ce2b0..46304d8 100644 --- a/fs/ext3/namei.h +++ b/fs/ext3/namei.h @@ -6,3 +6,22 @@ */ extern struct dentry *ext3_get_parent(struct dentry *child); + +static inline struct buffer_head *ext3_dir_bread(handle_t *handle, + struct inode *inode, + int block, int create, + int *err) +{ + struct buffer_head *bh; + + bh = ext3_bread(handle, inode, block, create, err); + + if (!bh && !(*err)) { + *err = -EIO; + ext3_error(inode->i_sb, __func__, + "Directory hole detected on inode %lu\n", + inode->i_ino); + return NULL; + } + return bh; +} -- cgit v0.10.2 From ae2cf4284e198684cad8f654923dd8062ee46f88 Mon Sep 17 00:00:00 2001 From: Zhao Hongjiang Date: Tue, 9 Oct 2012 13:44:36 +0800 Subject: ext2: fix return values on parse_options() failure parse_options() in ext2 should return 0 when parse the mount options fails. Signed-off-by: Zhao Hongjiang Reviewed-by: Lukas Czerner Signed-off-by: Jan Kara diff --git a/fs/ext2/super.c b/fs/ext2/super.c index 6c205d0..fa04d02 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -469,7 +469,7 @@ static int parse_options(char *options, struct super_block *sb) uid = make_kuid(current_user_ns(), option); if (!uid_valid(uid)) { ext2_msg(sb, KERN_ERR, "Invalid uid value %d", option); - return -1; + return 0; } sbi->s_resuid = uid; @@ -480,7 +480,7 @@ static int parse_options(char *options, struct super_block *sb) gid = make_kgid(current_user_ns(), option); if (!gid_valid(gid)) { ext2_msg(sb, KERN_ERR, "Invalid gid value %d", option); - return -1; + return 0; } sbi->s_resgid = gid; break; -- cgit v0.10.2 From 66415f6b50f5bcbc56c78df54aacee73f3d03a3d Mon Sep 17 00:00:00 2001 From: Zhao Hongjiang Date: Tue, 9 Oct 2012 13:48:47 +0800 Subject: ext3: fix return values on parse_options() failure parse_options() in ext3 should return 0 when parse the mount options fails. Signed-off-by: Zhao Hongjiang Reviewed-by: Lukas Czerner Signed-off-by: Jan Kara diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 17ae5c8..ebf8312 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1001,7 +1001,7 @@ static int parse_options (char *options, struct super_block *sb, uid = make_kuid(current_user_ns(), option); if (!uid_valid(uid)) { ext3_msg(sb, KERN_ERR, "Invalid uid value %d", option); - return -1; + return 0; } sbi->s_resuid = uid; @@ -1012,7 +1012,7 @@ static int parse_options (char *options, struct super_block *sb, gid = make_kgid(current_user_ns(), option); if (!gid_valid(gid)) { ext3_msg(sb, KERN_ERR, "Invalid gid value %d", option); - return -1; + return 0; } sbi->s_resgid = gid; break; -- cgit v0.10.2 From 6c29c50fda25c2ac2ce45a9b042ff7e424aa8eac Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 9 Oct 2012 23:30:17 +0200 Subject: quota: Silence warning about PRJQUOTA not being handled in need_print_warning() PRJQUOTA value of quota type should never reach need_print_warning() since XFS (which is the only fs which uses that type) doesn't use generic functions calling this function. Anyway, add PRJQUOTA case to the switch to make gcc happy. Signed-off-by: Jan Kara diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 557a9c20..05ae3c9 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -1160,6 +1160,8 @@ static int need_print_warning(struct dquot_warn *warn) return uid_eq(current_fsuid(), warn->w_dq_id.uid); case GRPQUOTA: return in_group_p(warn->w_dq_id.gid); + case PRJQUOTA: /* Never taken... Just make gcc happy */ + return 0; } return 0; } -- cgit v0.10.2 From 588377d6199034c36d335e7df5818b731fea072c Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 8 Oct 2012 20:37:30 -0700 Subject: rbd: reset BACKOFF if unable to re-queue If ceph_fault() is unable to queue work after a delay, it sets the BACKOFF connection flag so con_work() will attempt to do so. In con_work(), when BACKOFF is set, if queue_delayed_work() doesn't result in newly-queued work, it simply ignores this condition and proceeds as if no backoff delay were desired. There are two problems with this--one of which is a bug. The first problem is simply that the intended behavior is to back off, and if we aren't able queue the work item to run after a delay we're not doing that. The only reason queue_delayed_work() won't queue work is if the provided work item is already queued. In the messenger, this means that con_work() is already scheduled to be run again. So if we simply set the BACKOFF flag again when this occurs, we know the next con_work() call will again attempt to hold off activity on the connection until after the delay. The second problem--the bug--is a leak of a reference count. If queue_delayed_work() returns 0 in con_work(), con->ops->put() drops the connection reference held on entry to con_work(). However, processing is (was) allowed to continue, and at the end of the function a second con->ops->put() is called. This patch fixes both problems. Signed-off-by: Alex Elder Reviewed-by: Sage Weil diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index 159aa8b..cad0d17 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -2300,10 +2300,11 @@ restart: mutex_unlock(&con->mutex); return; } else { - con->ops->put(con); dout("con_work %p FAILED to back off %lu\n", con, con->delay); + set_bit(CON_FLAG_BACKOFF, &con->flags); } + goto done; } if (con->state == CON_STATE_STANDBY) { -- cgit v0.10.2 From dee1f973ca341c266229faa5a1a5bb268bed3531 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Wed, 10 Oct 2012 01:04:58 -0400 Subject: ext4: race-condition protection for ext4_convert_unwritten_extents_endio We assumed that at the time we call ext4_convert_unwritten_extents_endio() extent in question is fully inside [map.m_lblk, map->m_len] because it was already split during submission. But this may not be true due to a race between writeback vs fallocate. If extent in question is larger than requested we will split it again. Special precautions should being done if zeroout required because [map.m_lblk, map->m_len] already contains valid data. Signed-off-by: Dmitry Monakhov Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index c278927..7011ac9 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -52,6 +52,9 @@ #define EXT4_EXT_MARK_UNINIT1 0x2 /* mark first half uninitialized */ #define EXT4_EXT_MARK_UNINIT2 0x4 /* mark second half uninitialized */ +#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */ +#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */ + static __le32 ext4_extent_block_csum(struct inode *inode, struct ext4_extent_header *eh) { @@ -2914,6 +2917,9 @@ static int ext4_split_extent_at(handle_t *handle, unsigned int ee_len, depth; int err = 0; + BUG_ON((split_flag & (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2)) == + (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2)); + ext_debug("ext4_split_extents_at: inode %lu, logical" "block %llu\n", inode->i_ino, (unsigned long long)split); @@ -2972,7 +2978,14 @@ static int ext4_split_extent_at(handle_t *handle, err = ext4_ext_insert_extent(handle, inode, path, &newex, flags); if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) { - err = ext4_ext_zeroout(inode, &orig_ex); + if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) { + if (split_flag & EXT4_EXT_DATA_VALID1) + err = ext4_ext_zeroout(inode, ex2); + else + err = ext4_ext_zeroout(inode, ex); + } else + err = ext4_ext_zeroout(inode, &orig_ex); + if (err) goto fix_extent_len; /* update the extent length and mark as initialized */ @@ -3025,12 +3038,13 @@ static int ext4_split_extent(handle_t *handle, uninitialized = ext4_ext_is_uninitialized(ex); if (map->m_lblk + map->m_len < ee_block + ee_len) { - split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT ? - EXT4_EXT_MAY_ZEROOUT : 0; + split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT; flags1 = flags | EXT4_GET_BLOCKS_PRE_IO; if (uninitialized) split_flag1 |= EXT4_EXT_MARK_UNINIT1 | EXT4_EXT_MARK_UNINIT2; + if (split_flag & EXT4_EXT_DATA_VALID2) + split_flag1 |= EXT4_EXT_DATA_VALID1; err = ext4_split_extent_at(handle, inode, path, map->m_lblk + map->m_len, split_flag1, flags1); if (err) @@ -3043,8 +3057,8 @@ static int ext4_split_extent(handle_t *handle, return PTR_ERR(path); if (map->m_lblk >= ee_block) { - split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT ? - EXT4_EXT_MAY_ZEROOUT : 0; + split_flag1 = split_flag & (EXT4_EXT_MAY_ZEROOUT | + EXT4_EXT_DATA_VALID2); if (uninitialized) split_flag1 |= EXT4_EXT_MARK_UNINIT1; if (split_flag & EXT4_EXT_MARK_UNINIT2) @@ -3323,26 +3337,47 @@ static int ext4_split_unwritten_extents(handle_t *handle, split_flag |= ee_block + ee_len <= eof_block ? EXT4_EXT_MAY_ZEROOUT : 0; split_flag |= EXT4_EXT_MARK_UNINIT2; - + if (flags & EXT4_GET_BLOCKS_CONVERT) + split_flag |= EXT4_EXT_DATA_VALID2; flags |= EXT4_GET_BLOCKS_PRE_IO; return ext4_split_extent(handle, inode, path, map, split_flag, flags); } static int ext4_convert_unwritten_extents_endio(handle_t *handle, - struct inode *inode, - struct ext4_ext_path *path) + struct inode *inode, + struct ext4_map_blocks *map, + struct ext4_ext_path *path) { struct ext4_extent *ex; + ext4_lblk_t ee_block; + unsigned int ee_len; int depth; int err = 0; depth = ext_depth(inode); ex = path[depth].p_ext; + ee_block = le32_to_cpu(ex->ee_block); + ee_len = ext4_ext_get_actual_len(ex); ext_debug("ext4_convert_unwritten_extents_endio: inode %lu, logical" "block %llu, max_blocks %u\n", inode->i_ino, - (unsigned long long)le32_to_cpu(ex->ee_block), - ext4_ext_get_actual_len(ex)); + (unsigned long long)ee_block, ee_len); + + /* If extent is larger than requested then split is required */ + if (ee_block != map->m_lblk || ee_len > map->m_len) { + err = ext4_split_unwritten_extents(handle, inode, map, path, + EXT4_GET_BLOCKS_CONVERT); + if (err < 0) + goto out; + ext4_ext_drop_refs(path); + path = ext4_ext_find_extent(inode, map->m_lblk, path); + if (IS_ERR(path)) { + err = PTR_ERR(path); + goto out; + } + depth = ext_depth(inode); + ex = path[depth].p_ext; + } err = ext4_ext_get_access(handle, inode, path + depth); if (err) @@ -3652,7 +3687,7 @@ ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode, } /* IO end_io complete, convert the filled extent to written */ if ((flags & EXT4_GET_BLOCKS_CONVERT)) { - ret = ext4_convert_unwritten_extents_endio(handle, inode, + ret = ext4_convert_unwritten_extents_endio(handle, inode, map, path); if (ret >= 0) { ext4_update_inode_fsync_trans(handle, inode, 1); -- cgit v0.10.2 From 06db49e68ae70cf16819b85a14057acb2820776a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 10 Oct 2012 01:06:58 -0400 Subject: ext4: fix metadata checksum calculation for the superblock The function ext4_handle_dirty_super() was calculating the superblock on the wrong block data. As a result, when the superblock is modified while it is mounted (most commonly, when inodes are added or removed from the orphan list), the superblock checksum would be wrong. We didn't notice because the superblock *was* being correctly calculated in ext4_commit_super(), and this would get called when the file system was unmounted. So the problem only became obvious if the system crashed while the file system was mounted. Fix this by removing the poorly designed function signature for ext4_superblock_csum_set(); if it only took a single argument, the pointer to a struct superblock, the ambiguity which caused this mistake would have been impossible. Reported-by: George Spelvin Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 3ab2539..78971cf 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -2063,8 +2063,7 @@ extern int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count); extern int ext4_calculate_overhead(struct super_block *sb); extern int ext4_superblock_csum_verify(struct super_block *sb, struct ext4_super_block *es); -extern void ext4_superblock_csum_set(struct super_block *sb, - struct ext4_super_block *es); +extern void ext4_superblock_csum_set(struct super_block *sb); extern void *ext4_kvmalloc(size_t size, gfp_t flags); extern void *ext4_kvzalloc(size_t size, gfp_t flags); extern void ext4_kvfree(void *ptr); diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c index bfa65b4..b4323ba 100644 --- a/fs/ext4/ext4_jbd2.c +++ b/fs/ext4/ext4_jbd2.c @@ -143,17 +143,13 @@ int __ext4_handle_dirty_super(const char *where, unsigned int line, struct buffer_head *bh = EXT4_SB(sb)->s_sbh; int err = 0; + ext4_superblock_csum_set(sb); if (ext4_handle_valid(handle)) { - ext4_superblock_csum_set(sb, - (struct ext4_super_block *)bh->b_data); err = jbd2_journal_dirty_metadata(handle, bh); if (err) ext4_journal_abort_handle(where, line, __func__, bh, handle, err); - } else { - ext4_superblock_csum_set(sb, - (struct ext4_super_block *)bh->b_data); + } else mark_buffer_dirty(bh); - } return err; } diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 982f6fc..5ededf1 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -143,9 +143,10 @@ int ext4_superblock_csum_verify(struct super_block *sb, return es->s_checksum == ext4_superblock_csum(sb, es); } -void ext4_superblock_csum_set(struct super_block *sb, - struct ext4_super_block *es) +void ext4_superblock_csum_set(struct super_block *sb) { + struct ext4_super_block *es = EXT4_SB(sb)->s_es; + if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) return; @@ -4387,7 +4388,7 @@ static int ext4_commit_super(struct super_block *sb, int sync) cpu_to_le32(percpu_counter_sum_positive( &EXT4_SB(sb)->s_freeinodes_counter)); BUFFER_TRACE(sbh, "marking dirty"); - ext4_superblock_csum_set(sb, es); + ext4_superblock_csum_set(sb); mark_buffer_dirty(sbh); if (sync) { error = sync_dirty_buffer(sbh); -- cgit v0.10.2 From bc86cf7af2ebda88056538e8edff852ee627f76a Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 9 Oct 2012 23:26:06 -0700 Subject: mtd: nand: fix Samsung SLC NAND identification regression A combination of the following two commits caused a regression in 3.7-rc1 when identifying some Samsung NAND, so that some previously working NAND were no longer detected properly: commit e3b88bd604283ef83ae6e8f53622d5b1ffe9d43a mtd: nand: add generic READ ID length calculation functions commit e2d3a35ee427aaba99b6c68a56609ce276c51270 mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID Particularly, a regression was seen on Samsung K9F2G08U0B, with the following full 8-byte READ ID string: ec da 10 95 44 00 ec da The basic problem is that Samsung manufactures both SLC and MLC NAND that use a non-standard decoding table for deriving information from their IDs. I have heuristically determined that all the chips that use the new table have ID strings which wrap around after the 6th byte. Unfortunately, I overlooked the fact that some older Samsung SLC (which use a different decoding table) have "5 byte ID strings" which also wrap around after the 6th byte. This patch re-introduces a distinction between these old and new Samsung NAND by checking that the 6th byte is non-zero, allowing both old and new Samsung NAND to be detected properly. Signed-off-by: Brian Norris Tested-by: Brian Norris Reported-by: Marek Vasut Tested-by: Marek Vasut Signed-off-by: David Woodhouse diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec6841d..d5ece6e 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2983,13 +2983,14 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, /* * Field definitions are in the following datasheets: * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) - * New style (6 byte ID): Samsung K9GAG08U0F (p.44) + * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) * - * Check for ID length, cell type, and Hynix/Samsung ID to decide what - * to do. + * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung + * ID to decide what to do. */ - if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) { + if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && + id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); extid >>= 2; -- cgit v0.10.2 From 973a6a76dc0b2a032b682ed7705828584bf87427 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 9 Oct 2012 16:25:13 -0300 Subject: ARM: mxc: platform-mxc-mmc: Fix register region size Do not hardcode the register region to SZ_4K as this is not correct for mx31. Use data->iosize instead which works for both mx27 and mx31 cases. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 540d3a7..e7b920b 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -55,7 +55,7 @@ struct platform_device *__init imx_add_mxc_mmc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, -- cgit v0.10.2 From a4bb8e69b17c59669c9480ee9c2e078b5e8a238e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 8 Oct 2012 08:46:06 +0200 Subject: ARM i.MX25: Fix lcdc_ipg_per parent clock It's per7, not per6. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d20d479..334c839 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -127,7 +127,7 @@ int __init mx25_clocks_init(void) clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); - clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7); + clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); -- cgit v0.10.2 From 1f441c435eb6967489860a590d4aa63828cab5e5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 9 Oct 2012 10:03:00 +0200 Subject: ARM i.MX25 clk: Fix nfc_ipg_per parent It's per8, there is no ipg_per clk. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 334c839..01e2f84 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -128,7 +128,7 @@ int __init mx25_clocks_init(void) clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); - clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); + clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); -- cgit v0.10.2 From 92063cee118655d25b50d04eb77b012f3287357a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 9 Oct 2012 10:04:04 +0200 Subject: ARM i.MX25: Fix PWM per clock lookups They are behind the gate pwm_ipg_per, not directly behind per10. Signed-off-by: Sascha Hauer diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 01e2f84..840fdfa 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -203,13 +203,13 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.0"); + clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.0"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.1"); + clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.1"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.2"); + clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.2"); clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.3"); + clk_register_clkdev(clk[pwm_ipg_per], "per", "mxc_pwm.3"); clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0"); -- cgit v0.10.2 From 5a6ea4af0907f995dc06df21a9c9ef764c7cd3bc Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 25 Sep 2012 15:27:13 +0530 Subject: mtd: ofpart: Fix incorrect NULL check in parse_ofoldpart_partitions() The pointer returned by kzalloc should be tested for NULL to avoid potential NULL pointer dereference later. Incorrect pointer was being tested for NULL. Bug introduced by commit fbcf62a3 (mtd: physmap_of: move parse_obsolete_partitions to become separate parser). This patch fixes this bug. Cc: Dmitry Eremin-Solenikov Cc: Artem Bityutskiy Cc: stable@kernel.org Signed-off-by: Sachin Kamat Signed-off-by: David Woodhouse diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 64be8f0..d9127e2 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -121,7 +121,7 @@ static int parse_ofoldpart_partitions(struct mtd_info *master, nr_parts = plen / sizeof(part[0]); *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL); - if (!pparts) + if (!*pparts) return -ENOMEM; names = of_get_property(dp, "partition-names", &plen); -- cgit v0.10.2 From 7386cdbf2f57ea8cff3c9fde93f206e58b9fe13f Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Wed, 10 Oct 2012 11:51:09 +0530 Subject: nohz: Fix idle ticks in cpu summary line of /proc/stat Git commit 09a1d34f8535ecf9 "nohz: Make idle/iowait counter update conditional" introduced a bug in regard to cpu hotplug. The effect is that the number of idle ticks in the cpu summary line in /proc/stat is still counting ticks for offline cpus. Reproduction is easy, just start a workload that keeps all cpus busy, switch off one or more cpus and then watch the idle field in top. On a dual-core with one cpu 100% busy and one offline cpu you will get something like this: %Cpu(s): 48.7 us, 1.3 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, %0.0 st The problem is that an offline cpu still has ts->idle_active == 1. To fix this we should make sure that the cpu is online when calling get_cpu_idle_time_us and get_cpu_iowait_time_us. [Srivatsa: Rebased to current mainline] Reported-by: Martin Schwidefsky Signed-off-by: Michal Hocko Reviewed-by: Srivatsa S. Bhat Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/20121010061820.8999.57245.stgit@srivatsabhat.in.ibm.com Cc: deepthi@linux.vnet.ibm.com Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner diff --git a/fs/proc/stat.c b/fs/proc/stat.c index 64c3b31..e296572 100644 --- a/fs/proc/stat.c +++ b/fs/proc/stat.c @@ -45,10 +45,13 @@ static cputime64_t get_iowait_time(int cpu) static u64 get_idle_time(int cpu) { - u64 idle, idle_time = get_cpu_idle_time_us(cpu, NULL); + u64 idle, idle_time = -1ULL; + + if (cpu_online(cpu)) + idle_time = get_cpu_idle_time_us(cpu, NULL); if (idle_time == -1ULL) - /* !NO_HZ so we can rely on cpustat.idle */ + /* !NO_HZ or cpu offline so we can rely on cpustat.idle */ idle = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE]; else idle = usecs_to_cputime64(idle_time); @@ -58,10 +61,13 @@ static u64 get_idle_time(int cpu) static u64 get_iowait_time(int cpu) { - u64 iowait, iowait_time = get_cpu_iowait_time_us(cpu, NULL); + u64 iowait, iowait_time = -1ULL; + + if (cpu_online(cpu)) + iowait_time = get_cpu_iowait_time_us(cpu, NULL); if (iowait_time == -1ULL) - /* !NO_HZ so we can rely on cpustat.iowait */ + /* !NO_HZ or cpu offline so we can rely on cpustat.iowait */ iowait = kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT]; else iowait = usecs_to_cputime64(iowait_time); -- cgit v0.10.2 From c7c0f2cdef1362c5fe301a1ffa8379824ee3f813 Mon Sep 17 00:00:00 2001 From: Ashish Chavan Date: Thu, 11 Oct 2012 14:04:37 +0530 Subject: ASoC: codecs: da9055: Minor improvement in ALC calibration process This patch slightly improves ALC calibration process of da9055 codec driver by muting Mic PGAs during calibration. Signed-off-by: Ashish Chavan Signed-off-by: David Dajun Chen Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/da9055.c b/sound/soc/codecs/da9055.c index 185d8dd..f379b08 100644 --- a/sound/soc/codecs/da9055.c +++ b/sound/soc/codecs/da9055.c @@ -178,6 +178,12 @@ #define DA9055_AIF_WORD_S24_LE (2 << 2) #define DA9055_AIF_WORD_S32_LE (3 << 2) +/* MIC_L_CTRL bit fields */ +#define DA9055_MIC_L_MUTE_EN (1 << 6) + +/* MIC_R_CTRL bit fields */ +#define DA9055_MIC_R_MUTE_EN (1 << 6) + /* MIXIN_L_CTRL bit fields */ #define DA9055_MIXIN_L_MIX_EN (1 << 3) @@ -476,7 +482,7 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - u8 reg_val, adc_left, adc_right; + u8 reg_val, adc_left, adc_right, mic_left, mic_right; int avg_left_data, avg_right_data, offset_l, offset_r; if (ucontrol->value.integer.value[0]) { @@ -485,6 +491,16 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol, * offsets must be done first */ + /* Save current values from Mic control registers */ + mic_left = snd_soc_read(codec, DA9055_MIC_L_CTRL); + mic_right = snd_soc_read(codec, DA9055_MIC_R_CTRL); + + /* Mute Mic PGA Left and Right */ + snd_soc_update_bits(codec, DA9055_MIC_L_CTRL, + DA9055_MIC_L_MUTE_EN, DA9055_MIC_L_MUTE_EN); + snd_soc_update_bits(codec, DA9055_MIC_R_CTRL, + DA9055_MIC_R_MUTE_EN, DA9055_MIC_R_MUTE_EN); + /* Save current values from ADC control registers */ adc_left = snd_soc_read(codec, DA9055_ADC_L_CTRL); adc_right = snd_soc_read(codec, DA9055_ADC_R_CTRL); @@ -520,6 +536,10 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol, /* Restore original values of ADC control registers */ snd_soc_write(codec, DA9055_ADC_L_CTRL, adc_left); snd_soc_write(codec, DA9055_ADC_R_CTRL, adc_right); + + /* Restore original values of Mic control registers */ + snd_soc_write(codec, DA9055_MIC_L_CTRL, mic_left); + snd_soc_write(codec, DA9055_MIC_R_CTRL, mic_right); } return snd_soc_put_volsw(kcontrol, ucontrol); -- cgit v0.10.2 From 8e49f418c9632790bf456634742d34d97120a784 Mon Sep 17 00:00:00 2001 From: Vaibhav Nagarnaik Date: Wed, 10 Oct 2012 16:40:27 -0700 Subject: ring-buffer: Check for uninitialized cpu buffer before resizing With a system where, num_present_cpus < num_possible_cpus, even if all CPUs are online, non-present CPUs don't have per_cpu buffers allocated. If per_cpu//buffer_size_kb is modified for such a CPU, it can cause a panic due to NULL dereference in ring_buffer_resize(). To fix this, resize operation is allowed only if the per-cpu buffer has been initialized. Link: http://lkml.kernel.org/r/1349912427-6486-1-git-send-email-vnagarnaik@google.com Cc: stable@vger.kernel.org # 3.5+ Signed-off-by: Vaibhav Nagarnaik Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b32ed0e..b979426 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1567,6 +1567,10 @@ int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size, put_online_cpus(); } else { + /* Make sure this CPU has been intitialized */ + if (!cpumask_test_cpu(cpu_id, buffer->cpumask)) + goto out; + cpu_buffer = buffer->buffers[cpu_id]; if (nr_pages == cpu_buffer->nr_pages) -- cgit v0.10.2 From 26b6e44afb58432a5e998da0343757404f9de9ee Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Sun, 7 Oct 2012 08:51:07 -0700 Subject: drm/i915: Set guardband clipping workaround bit in the right register. A previous patch, namely: commit bf97b276ca04cee9ab65ffd378fa8e6aedd71ff6 Author: Daniel Vetter Date: Wed Apr 11 20:42:41 2012 +0200 drm/i915: implement w/a for incorrect guarband clipping accidentally set bit 5 in 3D_CHICKEN, which has nothing to do with clipping. This patch changes it to be set in 3D_CHICKEN3, where it belongs. The game "Dante" demonstrates random clipping issues when guardband clipping is enabled and bit 5 of 3D_CHICKEN3 isn't set. So the workaround is actually necessary. Cc: Daniel Vetter Cc: Oliver McFadden Acked-by: Paul Menzel Signed-off-by: Kenneth Graunke Reviewed-by: Mika Kuoppala Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 64c1be0..a4162dd 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -521,7 +521,7 @@ */ # define _3D_CHICKEN2_WM_READ_PIPELINED (1 << 14) #define _3D_CHICKEN3 0x02090 -#define _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL (1 << 5) +#define _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL (1 << 5) #define MI_MODE 0x0209c # define VS_TIMER_DISPATCH (1 << 6) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index b3b4b6c..72f41aa 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3442,8 +3442,8 @@ static void gen6_init_clock_gating(struct drm_device *dev) GEN6_RCCUNIT_CLOCK_GATE_DISABLE); /* Bspec says we need to always set all mask bits. */ - I915_WRITE(_3D_CHICKEN, (0xFFFF << 16) | - _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL); + I915_WRITE(_3D_CHICKEN3, (0xFFFF << 16) | + _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL); /* * According to the spec the following bits should be -- cgit v0.10.2 From acb868d3d710b09a356d848e0cd44d9713a9e274 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 26 Sep 2012 13:47:30 +0100 Subject: drm/i915: Disallow preallocation of requests The intention was to allow the caller to avoid a failure to queue a request having already written commands to the ring. However, this is a moot point as the i915_add_request() can fail for other reasons than a mere allocation failure and those failure cases are more likely than ENOMEM. So the overlay code already had to handle i915_add_request() failures, and due to commit 3bb73aba1ed5198a2c1dfaac4f3c95459930d84a Author: Chris Wilson Date: Fri Jul 20 12:40:59 2012 +0100 drm/i915: Allow late allocation of request for i915_add_request() the error handling code in intel_overlay.c was subject to causing double-frees, as found by coverity. Rather than further complicate i915_add_request() and callers, realise the battle is lost and adapt intel_overlay.c to take advantage of the late allocation of requests. v2: Handle callers passing in a NULL seqno. v3: Ditto. This time for sure. Signed-off-by: Chris Wilson Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 4f2831a..d5138c3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1427,7 +1427,7 @@ int __must_check i915_gpu_idle(struct drm_device *dev); int __must_check i915_gem_idle(struct drm_device *dev); int i915_add_request(struct intel_ring_buffer *ring, struct drm_file *file, - struct drm_i915_gem_request *request); + u32 *seqno); int __must_check i915_wait_seqno(struct intel_ring_buffer *ring, uint32_t seqno); int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 53de95c..04b0c07 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1956,11 +1956,12 @@ i915_gem_next_request_seqno(struct intel_ring_buffer *ring) int i915_add_request(struct intel_ring_buffer *ring, struct drm_file *file, - struct drm_i915_gem_request *request) + u32 *out_seqno) { drm_i915_private_t *dev_priv = ring->dev->dev_private; - uint32_t seqno; + struct drm_i915_gem_request *request; u32 request_ring_position; + u32 seqno; int was_empty; int ret; @@ -1975,11 +1976,9 @@ i915_add_request(struct intel_ring_buffer *ring, if (ret) return ret; - if (request == NULL) { - request = kmalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) - return -ENOMEM; - } + request = kmalloc(sizeof(*request), GFP_KERNEL); + if (request == NULL) + return -ENOMEM; seqno = i915_gem_next_request_seqno(ring); @@ -2031,6 +2030,8 @@ i915_add_request(struct intel_ring_buffer *ring, } } + if (out_seqno) + *out_seqno = seqno; return 0; } diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index afd0f30..555912f 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -210,7 +210,6 @@ static void intel_overlay_unmap_regs(struct intel_overlay *overlay, } static int intel_overlay_do_wait_request(struct intel_overlay *overlay, - struct drm_i915_gem_request *request, void (*tail)(struct intel_overlay *)) { struct drm_device *dev = overlay->dev; @@ -219,12 +218,10 @@ static int intel_overlay_do_wait_request(struct intel_overlay *overlay, int ret; BUG_ON(overlay->last_flip_req); - ret = i915_add_request(ring, NULL, request); - if (ret) { - kfree(request); - return ret; - } - overlay->last_flip_req = request->seqno; + ret = i915_add_request(ring, NULL, &overlay->last_flip_req); + if (ret) + return ret; + overlay->flip_tail = tail; ret = i915_wait_seqno(ring, overlay->last_flip_req); if (ret) @@ -241,7 +238,6 @@ static int intel_overlay_on(struct intel_overlay *overlay) struct drm_device *dev = overlay->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; - struct drm_i915_gem_request *request; int ret; BUG_ON(overlay->active); @@ -249,17 +245,9 @@ static int intel_overlay_on(struct intel_overlay *overlay) WARN_ON(IS_I830(dev) && !(dev_priv->quirks & QUIRK_PIPEA_FORCE)); - request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) { - ret = -ENOMEM; - goto out; - } - ret = intel_ring_begin(ring, 4); - if (ret) { - kfree(request); - goto out; - } + if (ret) + return ret; intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_ON); intel_ring_emit(ring, overlay->flip_addr | OFC_UPDATE); @@ -267,9 +255,7 @@ static int intel_overlay_on(struct intel_overlay *overlay) intel_ring_emit(ring, MI_NOOP); intel_ring_advance(ring); - ret = intel_overlay_do_wait_request(overlay, request, NULL); -out: - return ret; + return intel_overlay_do_wait_request(overlay, NULL); } /* overlay needs to be enabled in OCMD reg */ @@ -279,17 +265,12 @@ static int intel_overlay_continue(struct intel_overlay *overlay, struct drm_device *dev = overlay->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; - struct drm_i915_gem_request *request; u32 flip_addr = overlay->flip_addr; u32 tmp; int ret; BUG_ON(!overlay->active); - request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) - return -ENOMEM; - if (load_polyphase_filter) flip_addr |= OFC_UPDATE; @@ -299,22 +280,14 @@ static int intel_overlay_continue(struct intel_overlay *overlay, DRM_DEBUG("overlay underrun, DOVSTA: %x\n", tmp); ret = intel_ring_begin(ring, 2); - if (ret) { - kfree(request); + if (ret) return ret; - } + intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE); intel_ring_emit(ring, flip_addr); intel_ring_advance(ring); - ret = i915_add_request(ring, NULL, request); - if (ret) { - kfree(request); - return ret; - } - - overlay->last_flip_req = request->seqno; - return 0; + return i915_add_request(ring, NULL, &overlay->last_flip_req); } static void intel_overlay_release_old_vid_tail(struct intel_overlay *overlay) @@ -350,15 +323,10 @@ static int intel_overlay_off(struct intel_overlay *overlay) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; u32 flip_addr = overlay->flip_addr; - struct drm_i915_gem_request *request; int ret; BUG_ON(!overlay->active); - request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) - return -ENOMEM; - /* According to intel docs the overlay hw may hang (when switching * off) without loading the filter coeffs. It is however unclear whether * this applies to the disabling of the overlay or to the switching off @@ -366,10 +334,9 @@ static int intel_overlay_off(struct intel_overlay *overlay) flip_addr |= OFC_UPDATE; ret = intel_ring_begin(ring, 6); - if (ret) { - kfree(request); + if (ret) return ret; - } + /* wait for overlay to go idle */ intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE); intel_ring_emit(ring, flip_addr); @@ -380,8 +347,7 @@ static int intel_overlay_off(struct intel_overlay *overlay) intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); intel_ring_advance(ring); - return intel_overlay_do_wait_request(overlay, request, - intel_overlay_off_tail); + return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail); } /* recover from an interruption due to a signal @@ -426,24 +392,16 @@ static int intel_overlay_release_old_vid(struct intel_overlay *overlay) return 0; if (I915_READ(ISR) & I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT) { - struct drm_i915_gem_request *request; - /* synchronous slowpath */ - request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) - return -ENOMEM; - ret = intel_ring_begin(ring, 2); - if (ret) { - kfree(request); + if (ret) return ret; - } intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); intel_ring_emit(ring, MI_NOOP); intel_ring_advance(ring); - ret = intel_overlay_do_wait_request(overlay, request, + ret = intel_overlay_do_wait_request(overlay, intel_overlay_release_old_vid_tail); if (ret) return ret; -- cgit v0.10.2 From 1cf8378906b2d5a6449147914fe04c56d6f4fd87 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 10 Oct 2012 12:11:52 +0100 Subject: drm/i915: fixup i915_gem_object_get_page inline helper Note that just because we have n == MAX elements left, does not imply that there are only MAX elements left in the scatterlist and so we may not be on the last chain, and the nth element may in fact be a chain ptr. This is exercised by the improved hangman tests and the gem_exec_big test in i-g-t. This regression has been introduced in commit 9da3da660d8c19a54f6e93361d147509be3fff84 Author: Chris Wilson Date: Fri Jun 1 15:20:22 2012 +0100 drm/i915: Replace the array of pages with a scatterlist v2: KISS, replace the direct lookup with a for_each_sg() [danvet] v3: Try to be clever again. Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d5138c3..b84f786 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1341,9 +1341,14 @@ int __must_check i915_gem_object_get_pages(struct drm_i915_gem_object *obj); static inline struct page *i915_gem_object_get_page(struct drm_i915_gem_object *obj, int n) { struct scatterlist *sg = obj->pages->sgl; - while (n >= SG_MAX_SINGLE_ALLOC) { + int nents = obj->pages->nents; + while (nents > SG_MAX_SINGLE_ALLOC) { + if (n < SG_MAX_SINGLE_ALLOC - 1) + break; + sg = sg_chain_ptr(sg + SG_MAX_SINGLE_ALLOC - 1); n -= SG_MAX_SINGLE_ALLOC - 1; + nents -= SG_MAX_SINGLE_ALLOC - 1; } return sg_page(sg+n); } -- cgit v0.10.2 From 9169d3a88072b20f42e68a946e916bd7dfbc7f2c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 10 Oct 2012 23:14:01 +0200 Subject: drm/i915: disable wc gtt pte mappings on gen2 It doesn't work since the gtt pte range sits in the middle of the mmio bar. We didn't notice that since both my and Chris' gen2 machines don't support PAT and hence all wc io mapping request will automatically be demoted to uc. This regression has been introduce in commit edef7e685da05c13cce50c0126189c80fe2c8f71 Author: Chris Wilson Date: Fri Sep 14 11:57:47 2012 +0100 agp/intel: Use a write-combining map for updating PTEs Reported-by: Egbert Eich Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55834 Acked-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index e01f5ea..38390f7 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -667,7 +667,7 @@ static int intel_gtt_init(void) gtt_map_size = intel_private.base.gtt_total_entries * 4; intel_private.gtt = NULL; - if (INTEL_GTT_GEN < 6) + if (INTEL_GTT_GEN < 6 && INTEL_GTT_GEN > 2) intel_private.gtt = ioremap_wc(intel_private.gtt_bus_addr, gtt_map_size); if (intel_private.gtt == NULL) -- cgit v0.10.2 From ccd0d36e2a8ab8b4d314ff87779366ada33ffe00 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 10 Oct 2012 23:13:59 +0200 Subject: drm/i915: rip out the pipe A quirk for i855gm This seems to be the root-cause that breaks resume on my i855gm when I apply the "drm/i915: fixup the plane->pipe fixup code" patch. And that code doesn't even run on my machine, so it's pure timing changes causing the regression. Furthermore resume has been constantly switching between working and broken on this machine ever since kms support has been merged, seemingly with no related change as a root cause. And always with the same symptoms of the backlight lighting up, but the lvds panel only displaying black. Also, of both i855gm variants only one is in the table. And in the past we've only ever removed entries from this quirk table because it breaks things. So let's just remove it - in case there's indeed a bios out there relying on a running pipe A, we can add back in a more precise quirk entry, like all the others (save for i830/i845). Tested-by: Chris Wilson #855gm Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9cecfd7..f3b2d18 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7902,8 +7902,7 @@ static struct intel_quirk intel_quirks[] = { /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, - /* 855 & before need to leave pipe A & dpll A up */ - { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, + /* 830/845 need to leave pipe A & dpll A up */ { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, -- cgit v0.10.2 From fa55583797d12b10928a1813f3dcf066637caf5e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 10 Oct 2012 23:14:00 +0200 Subject: drm/i915: fixup the plane->pipe fixup code We need to check whether the _other plane is on our pipe, not whether our plane is on the other pipe. Otherwise if not both pipes/planes are active, we won't properly clean up the mess and set up our desired plane->pipe mapping. v2: Fixup the logic, I've totally fumbled it. Noticed by Chris Wilson. v3: I've checked Bspec, and the flexible plane->pipe mapping is a gen2/3 feature, so test for that instead of PCH_SPLIT v4: Check whether we indeed have 2 pipes before checking the other pipe, to avoid upsetting i845g/i865g. Noticed by Chris Wilson. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51265 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49838 Tested-by: Dave Airlie Tested-by: Chris Wilson #855gm Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f3b2d18..3511eff 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8058,29 +8058,42 @@ static void intel_enable_pipe_a(struct drm_device *dev) } +static bool +intel_check_plane_mapping(struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + u32 reg, val; + + if (dev_priv->num_pipe == 1) + return true; + + reg = DSPCNTR(!crtc->plane); + val = I915_READ(reg); + + if ((val & DISPLAY_PLANE_ENABLE) && + (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe)) + return false; + + return true; +} + static void intel_sanitize_crtc(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 reg, val; + u32 reg; /* Clear any frame start delays used for debugging left by the BIOS */ reg = PIPECONF(crtc->pipe); I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); /* We need to sanitize the plane -> pipe mapping first because this will - * disable the crtc (and hence change the state) if it is wrong. */ - if (!HAS_PCH_SPLIT(dev)) { + * disable the crtc (and hence change the state) if it is wrong. Note + * that gen4+ has a fixed plane -> pipe mapping. */ + if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) { struct intel_connector *connector; bool plane; - reg = DSPCNTR(crtc->plane); - val = I915_READ(reg); - - if ((val & DISPLAY_PLANE_ENABLE) == 0 && - (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe)) - goto ok; - DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n", crtc->base.base.id); @@ -8104,7 +8117,6 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) WARN_ON(crtc->active); crtc->base.enabled = false; } -ok: if (dev_priv->quirks & QUIRK_PIPEA_FORCE && crtc->pipe == PIPE_A && !crtc->active) { -- cgit v0.10.2 From 4afa0ace429624fde392b29d05a803672a41192e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 11 Oct 2012 18:43:52 +0200 Subject: drm/i915/dvo-ch7xxx: fix get_hw_state The boot-up state seems to be all-zeros, so it's safer to check for the bits that need to be set when the dvo encoder is in the dpms on state, than checking the bits we set when it's in the off state. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55047 Tested-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c index 38f3a6c..3edd981 100644 --- a/drivers/gpu/drm/i915/dvo_ch7xxx.c +++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c @@ -303,10 +303,10 @@ static bool ch7xxx_get_hw_state(struct intel_dvo_device *dvo) ch7xxx_readb(dvo, CH7xxx_PM, &val); - if (val & CH7xxx_PM_FPD) - return false; - else + if (val & (CH7xxx_PM_DVIL | CH7xxx_PM_DVIP)) return true; + else + return false; } static void ch7xxx_dump_regs(struct intel_dvo_device *dvo) -- cgit v0.10.2 From eda2d7f582d51a4b5e01d48845ea28321357b136 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Wed, 10 Oct 2012 18:35:28 -0300 Subject: drm/i915: HSW CRW stability magic This magic brings stability to HSW CRW machines. Signed-off-by: Rodrigo Vivi Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 04b0c07..bb941f8 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3961,6 +3961,9 @@ i915_gem_init_hw(struct drm_device *dev) if (!intel_enable_gtt()) return -EIO; + if (IS_HASWELL(dev) && (I915_READ(0x120010) == 1)) + I915_WRITE(0x9008, I915_READ(0x9008) | 0xf0000); + i915_gem_l3_remap(dev); i915_gem_init_swizzling(dev); -- cgit v0.10.2 From be3cd5e37716bcf1579f63bdd919345a1f9692b9 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 12 Oct 2012 10:33:05 +0300 Subject: drm/i915: fix non-DP-D eDP backlight cleanup and module reload Backlight is initialized for eDP, but cleaned up only for eDP on DP-D port. This leaves behind a dangling backlight interface on module unload on machines that have eDP connected to something other than DP-D, and breaks the backlight interface for subsequent module reloads. Fix the cleanup, and thus module reload on affected machines. Reported-by: Imre Deak Signed-off-by: Jani Nikula Reviewed-by: Mika Kuoppala Tested-by: Imre Deak Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index c14d407..bd2c34a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2370,8 +2370,9 @@ static void intel_dp_destroy(struct drm_connector *connector) { struct drm_device *dev = connector->dev; + struct intel_dp *intel_dp = intel_attached_dp(connector); - if (intel_dpd_is_edp(dev)) + if (is_edp(intel_dp)) intel_panel_destroy_backlight(dev); drm_sysfs_connector_remove(connector); -- cgit v0.10.2 From 065a13e2cc665f6547dc7e8a9d6b6565badf940a Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Thu, 11 Oct 2012 16:26:06 +0200 Subject: Bluetooth: SMP: Fix setting unknown auth_req bits When sending a pairing request or response we should not just blindly copy the value that the remote device sent. Instead we should at least make sure to mask out any unknown bits. This is particularly critical from the upcoming LE Secure Connections feature perspective as incorrectly indicating support for it (by copying the remote value) would cause a failure to pair with devices that support it. Signed-off-by: Johan Hedberg Cc: stable@kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 8c225ef..2ac8d50 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -32,6 +32,8 @@ #define SMP_TIMEOUT msecs_to_jiffies(30000) +#define AUTH_REQ_MASK 0x07 + static inline void swap128(u8 src[16], u8 dst[16]) { int i; @@ -230,7 +232,7 @@ static void build_pairing_cmd(struct l2cap_conn *conn, req->max_key_size = SMP_MAX_ENC_KEY_SIZE; req->init_key_dist = 0; req->resp_key_dist = dist_keys; - req->auth_req = authreq; + req->auth_req = (authreq & AUTH_REQ_MASK); return; } @@ -239,7 +241,7 @@ static void build_pairing_cmd(struct l2cap_conn *conn, rsp->max_key_size = SMP_MAX_ENC_KEY_SIZE; rsp->init_key_dist = 0; rsp->resp_key_dist = req->resp_key_dist & dist_keys; - rsp->auth_req = authreq; + rsp->auth_req = (authreq & AUTH_REQ_MASK); } static u8 check_enc_key_size(struct l2cap_conn *conn, __u8 max_key_size) -- cgit v0.10.2 From fdc858a466b738d35d3492bc7cf77b1dac98bf7c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 13:50:56 +0000 Subject: pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops The sharpsl_pcmcia_ops structure gets passed into sa11xx_drv_pcmcia_probe, where it gets accessed at run-time, unlike all other pcmcia drivers that pass their structures into platform_device_add_data, which makes a copy. This means the gcc warning is valid and the structure must not be marked as __initdata. Without this patch, building collie_defconfig results in: drivers/pcmcia/pxa2xx_sharpsl.c:22:31: fatal error: mach-pxa/hardware.h: No such file or directory compilation terminated. make[3]: *** [drivers/pcmcia/pxa2xx_sharpsl.o] Error 1 make[2]: *** [drivers/pcmcia] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann Cc: Dominik Brodowski Cc: Russell King Cc: Pavel Machek Cc: linux-pcmcia@lists.infradead.org Cc: Jochen Friedrich Cc: stable@vger.kernel.org diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index b066273..7dd879c 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -194,7 +194,7 @@ static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) sharpsl_pcmcia_init_reset(skt); } -static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = { +static struct pcmcia_low_level sharpsl_pcmcia_ops = { .owner = THIS_MODULE, .hw_init = sharpsl_pcmcia_hw_init, .socket_state = sharpsl_pcmcia_socket_state, -- cgit v0.10.2 From 7d55a5dd61f794df89a733b1b8223cdbffe8897c Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 28 Sep 2012 11:54:48 +0100 Subject: [PARISC] asm: redo generic includes Signed-off-by: James Bottomley diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild index 458371a..77281064 100644 --- a/arch/parisc/include/asm/Kbuild +++ b/arch/parisc/include/asm/Kbuild @@ -1,6 +1,7 @@ include include/asm-generic/Kbuild.asm header-y += pdc.h -generic-y += clkdev.h -generic-y += word-at-a-time.h -generic-y += exec.h +generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \ + segment.h topology.h vga.h device.h percpu.h hw_irq.h mutex.h \ + div64.h irq_regs.h kdebug.h kvm_para.h local64.h local.h param.h \ + poll.h xor.h clkdev.h exec.h diff --git a/arch/parisc/include/asm/auxvec.h b/arch/parisc/include/asm/auxvec.h deleted file mode 100644 index 9c3ac4b..0000000 --- a/arch/parisc/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMPARISC_AUXVEC_H -#define __ASMPARISC_AUXVEC_H - -#endif diff --git a/arch/parisc/include/asm/compat_signal.h b/arch/parisc/include/asm/compat_signal.h deleted file mode 100644 index 6ad02c3..0000000 --- a/arch/parisc/include/asm/compat_signal.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Use generic */ -#include diff --git a/arch/parisc/include/asm/cputime.h b/arch/parisc/include/asm/cputime.h deleted file mode 100644 index dcdf2fb..0000000 --- a/arch/parisc/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __PARISC_CPUTIME_H -#define __PARISC_CPUTIME_H - -#include - -#endif /* __PARISC_CPUTIME_H */ diff --git a/arch/parisc/include/asm/device.h b/arch/parisc/include/asm/device.h deleted file mode 100644 index d8f9872..0000000 --- a/arch/parisc/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/parisc/include/asm/div64.h b/arch/parisc/include/asm/div64.h deleted file mode 100644 index 6cd978c..0000000 --- a/arch/parisc/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/emergency-restart.h b/arch/parisc/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c4..0000000 --- a/arch/parisc/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/parisc/include/asm/hw_irq.h b/arch/parisc/include/asm/hw_irq.h deleted file mode 100644 index 6707f7d..0000000 --- a/arch/parisc/include/asm/hw_irq.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -/* - * linux/include/asm/hw_irq.h - */ - -#endif diff --git a/arch/parisc/include/asm/irq_regs.h b/arch/parisc/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b..0000000 --- a/arch/parisc/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/kdebug.h b/arch/parisc/include/asm/kdebug.h deleted file mode 100644 index 6ece1b0..0000000 --- a/arch/parisc/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/kvm_para.h b/arch/parisc/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f..0000000 --- a/arch/parisc/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/local.h b/arch/parisc/include/asm/local.h deleted file mode 100644 index c11c530..0000000 --- a/arch/parisc/include/asm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/local64.h b/arch/parisc/include/asm/local64.h deleted file mode 100644 index 36c93b5..0000000 --- a/arch/parisc/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/mutex.h b/arch/parisc/include/asm/mutex.h deleted file mode 100644 index 458c1f7..0000000 --- a/arch/parisc/include/asm/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/arch/parisc/include/asm/param.h b/arch/parisc/include/asm/param.h deleted file mode 100644 index 965d454..0000000 --- a/arch/parisc/include/asm/param.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/percpu.h b/arch/parisc/include/asm/percpu.h deleted file mode 100644 index a0dcd19..0000000 --- a/arch/parisc/include/asm/percpu.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _PARISC_PERCPU_H -#define _PARISC_PERCPU_H - -#include - -#endif - diff --git a/arch/parisc/include/asm/poll.h b/arch/parisc/include/asm/poll.h deleted file mode 100644 index c98509d..0000000 --- a/arch/parisc/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/real.h b/arch/parisc/include/asm/real.h deleted file mode 100644 index 82acb25..0000000 --- a/arch/parisc/include/asm/real.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef _PARISC_REAL_H -#define _PARISC_REAL_H - - -#endif diff --git a/arch/parisc/include/asm/segment.h b/arch/parisc/include/asm/segment.h deleted file mode 100644 index 26794dd..0000000 --- a/arch/parisc/include/asm/segment.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __PARISC_SEGMENT_H -#define __PARISC_SEGMENT_H - -/* Only here because we have some old header files that expect it.. */ - -#endif diff --git a/arch/parisc/include/asm/topology.h b/arch/parisc/include/asm/topology.h deleted file mode 100644 index d8133eb..0000000 --- a/arch/parisc/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_PARISC_TOPOLOGY_H -#define _ASM_PARISC_TOPOLOGY_H - -#include - -#endif /* _ASM_PARISC_TOPOLOGY_H */ diff --git a/arch/parisc/include/asm/user.h b/arch/parisc/include/asm/user.h deleted file mode 100644 index 8022475..0000000 --- a/arch/parisc/include/asm/user.h +++ /dev/null @@ -1,5 +0,0 @@ -/* This file should not exist, but lots of generic code still includes - it. It's a hangover from old a.out days and the traditional core - dump format. We are ELF-only, and so are our core dumps. If we - need to support HP/UX core format then we'll do it here - eventually. */ diff --git a/arch/parisc/include/asm/vga.h b/arch/parisc/include/asm/vga.h deleted file mode 100644 index 171399a..0000000 --- a/arch/parisc/include/asm/vga.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_PARISC_VGA_H__ -#define __ASM_PARISC_VGA_H__ - -/* nothing */ - -#endif /* __ASM_PARISC_VGA_H__ */ diff --git a/arch/parisc/include/asm/xor.h b/arch/parisc/include/asm/xor.h deleted file mode 100644 index c82eb12..0000000 --- a/arch/parisc/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v0.10.2 From f2bab3eb4198ad49895e4cde0216beb3a1a88e31 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 2 Oct 2012 11:17:06 -0700 Subject: hwmon: (pmbus) remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Guenter Roeck CC: Jean Delvare Signed-off-by: Kees Cook Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 2ca6a5a..60745a5 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -4,7 +4,7 @@ menuconfig PMBUS tristate "PMBus support" - depends on I2C && EXPERIMENTAL + depends on I2C default n help Say yes here if you want to enable PMBus support. -- cgit v0.10.2 From 07d336006346f7f2e93e690de7c53a7e605f87f9 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 2 Oct 2012 11:16:18 -0700 Subject: Documentation/hwmon: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Jean Delvare CC: Guenter Roeck CC: Rob Landley Signed-off-by: Kees Cook Signed-off-by: Guenter Roeck diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches index 790f774..843751c 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches @@ -60,8 +60,7 @@ increase the chances of your change being accepted. * Add the driver to Kconfig and Makefile in alphabetical order. -* Make sure that all dependencies are listed in Kconfig. For new drivers, it - is most likely prudent to add a dependency on EXPERIMENTAL. +* Make sure that all dependencies are listed in Kconfig. * Avoid forward declarations if you can. Rearrange the code if necessary. -- cgit v0.10.2 From 1102dcab849313bd5a340b299b5cf61b518fbc0f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 9 Oct 2012 13:23:57 -0700 Subject: hwmon: (coretemp) Add support for Atom CE4110/4150/4170 TjMax for the CE4100 series of Atom CPUs was previously reported to be 110 degrees C. cpuinfo logs on the web show existing CPU types CE4110, CE4150, and CE4170, reported as "model name : Intel(R) Atom(TM) CPU CE41{1|5|7}0 @ 1.{2|6}0GHz" with model 28 (0x1c) and stepping 10 (0x0a). Add the three known variants to the tjmax table. Signed-off-by: Guenter Roeck cc: stable@vger.kernel.org Acked-by: Jean Delvare diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index c86b50c..f17256f 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -105,6 +105,7 @@ Process Processor TjMax(C) 330/230 125 E680/660/640/620 90 E680T/660T/640T/620T 110 + CE4170/4150/4110 110 45nm Core2 Processors Solo ULV SU3500/3300 100 diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 984a3f1..47b8d84 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -205,8 +205,11 @@ static const struct tjmax __cpuinitconst tjmax_table[] = { { "CPU N455", 100000 }, { "CPU N470", 100000 }, { "CPU N475", 100000 }, - { "CPU 230", 100000 }, - { "CPU 330", 125000 }, + { "CPU 230", 100000 }, /* Model 0x1c, stepping 2 */ + { "CPU 330", 125000 }, /* Model 0x1c, stepping 2 */ + { "CPU CE4110", 110000 }, /* Model 0x1c, stepping 10 */ + { "CPU CE4150", 110000 }, /* Model 0x1c, stepping 10 */ + { "CPU CE4170", 110000 }, /* Model 0x1c, stepping 10 */ }; static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, -- cgit v0.10.2 From 08280e6c4c2e8049ac61d9e8e3536ec1df629c0d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 14 Oct 2012 17:59:40 -0700 Subject: sparc64: Like x86 we should check current->mm during perf backtrace generation. If the MM is not active, only report the top-level PC. Do not try to access the address space. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index e48651d..9e96f84 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1738,8 +1738,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry *entry, { unsigned long ufp; - perf_callchain_store(entry, regs->tpc); - ufp = regs->u_regs[UREG_I6] + STACK_BIAS; do { struct sparc_stackf *usf, sf; @@ -1760,8 +1758,6 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry, { unsigned long ufp; - perf_callchain_store(entry, regs->tpc); - ufp = regs->u_regs[UREG_I6] & 0xffffffffUL; do { struct sparc_stackf32 *usf, sf; @@ -1780,6 +1776,11 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry, void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { + perf_callchain_store(entry, regs->tpc); + + if (!current->mm) + return; + flushw_user(); if (test_thread_flag(TIF_32BIT)) perf_callchain_user_32(entry, regs); -- cgit v0.10.2 From bc8b2428e73ce19aecbf2aac3f5d4c844adb3216 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 11 Oct 2012 21:59:17 -0700 Subject: ARM: shmobile: armadillo800eva: __io abuse cleanup a2a47ca36642e3995e982957bc42678cf11ca6ac (ARM: __io abuse cleanup) cleanuped __io() -> IOMEM(), but armadillo800eva was a outside of a target, since "merge window" timing issue. This patch cleanup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 2912eab..3cc8b1c 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1196,7 +1196,7 @@ static void __init eva_init(void) #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff); + l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); -- cgit v0.10.2 From cf7599322a6052dae7353f6d986eae06dc7759f5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 15 Oct 2012 13:54:29 +0900 Subject: sh: Wire up kcmp syscall. Signed-off-by: Paul Mundt diff --git a/arch/sh/include/uapi/asm/unistd_32.h b/arch/sh/include/uapi/asm/unistd_32.h index 72fd1e0..9e465f2 100644 --- a/arch/sh/include/uapi/asm/unistd_32.h +++ b/arch/sh/include/uapi/asm/unistd_32.h @@ -378,7 +378,8 @@ #define __NR_setns 364 #define __NR_process_vm_readv 365 #define __NR_process_vm_writev 366 +#define __NR_kcmp 367 -#define NR_syscalls 367 +#define NR_syscalls 368 #endif /* __ASM_SH_UNISTD_32_H */ diff --git a/arch/sh/include/uapi/asm/unistd_64.h b/arch/sh/include/uapi/asm/unistd_64.h index a28edc3..8e3a2ed 100644 --- a/arch/sh/include/uapi/asm/unistd_64.h +++ b/arch/sh/include/uapi/asm/unistd_64.h @@ -398,7 +398,8 @@ #define __NR_setns 375 #define __NR_process_vm_readv 376 #define __NR_process_vm_writev 377 +#define __NR_kcmp 378 -#define NR_syscalls 378 +#define NR_syscalls 379 #endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 4b68f0f..fe97ae5 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -384,3 +384,4 @@ ENTRY(sys_call_table) .long sys_setns .long sys_process_vm_readv /* 365 */ .long sys_process_vm_writev + .long sys_kcmp diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 0956345..5c7b1c6 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -404,3 +404,4 @@ sys_call_table: .long sys_setns /* 375 */ .long sys_process_vm_readv .long sys_process_vm_writev + .long sys_kcmp -- cgit v0.10.2 From 0dd4d5cbe4c38165dc9b3ad329ebb23f24d74fdb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 15 Oct 2012 14:08:48 +0900 Subject: sh: Fix up more fallout from pointless ARM __iomem churn. It was already pointed out how to fix these cases before the offending patches were merged, but unsurprisingly, that didn't happen. As this change is entirely superfluous to begin with, simply shut things up by casting everything away. Signed-off-by: Paul Mundt diff --git a/drivers/sh/intc/access.c b/drivers/sh/intc/access.c index f892ae1..114390f 100644 --- a/drivers/sh/intc/access.c +++ b/drivers/sh/intc/access.c @@ -75,54 +75,61 @@ unsigned long intc_get_field_from_handle(unsigned int value, unsigned int handle static unsigned long test_8(unsigned long addr, unsigned long h, unsigned long ignore) { - return intc_get_field_from_handle(__raw_readb(addr), h); + void __iomem *ptr = (void __iomem *)addr; + return intc_get_field_from_handle(__raw_readb(ptr), h); } static unsigned long test_16(unsigned long addr, unsigned long h, unsigned long ignore) { - return intc_get_field_from_handle(__raw_readw(addr), h); + void __iomem *ptr = (void __iomem *)addr; + return intc_get_field_from_handle(__raw_readw(ptr), h); } static unsigned long test_32(unsigned long addr, unsigned long h, unsigned long ignore) { - return intc_get_field_from_handle(__raw_readl(addr), h); + void __iomem *ptr = (void __iomem *)addr; + return intc_get_field_from_handle(__raw_readl(ptr), h); } static unsigned long write_8(unsigned long addr, unsigned long h, unsigned long data) { - __raw_writeb(intc_set_field_from_handle(0, data, h), addr); - (void)__raw_readb(addr); /* Defeat write posting */ + void __iomem *ptr = (void __iomem *)addr; + __raw_writeb(intc_set_field_from_handle(0, data, h), ptr); + (void)__raw_readb(ptr); /* Defeat write posting */ return 0; } static unsigned long write_16(unsigned long addr, unsigned long h, unsigned long data) { - __raw_writew(intc_set_field_from_handle(0, data, h), addr); - (void)__raw_readw(addr); /* Defeat write posting */ + void __iomem *ptr = (void __iomem *)addr; + __raw_writew(intc_set_field_from_handle(0, data, h), ptr); + (void)__raw_readw(ptr); /* Defeat write posting */ return 0; } static unsigned long write_32(unsigned long addr, unsigned long h, unsigned long data) { - __raw_writel(intc_set_field_from_handle(0, data, h), addr); - (void)__raw_readl(addr); /* Defeat write posting */ + void __iomem *ptr = (void __iomem *)addr; + __raw_writel(intc_set_field_from_handle(0, data, h), ptr); + (void)__raw_readl(ptr); /* Defeat write posting */ return 0; } static unsigned long modify_8(unsigned long addr, unsigned long h, unsigned long data) { + void __iomem *ptr = (void __iomem *)addr; unsigned long flags; unsigned int value; local_irq_save(flags); - value = intc_set_field_from_handle(__raw_readb(addr), data, h); - __raw_writeb(value, addr); - (void)__raw_readb(addr); /* Defeat write posting */ + value = intc_set_field_from_handle(__raw_readb(ptr), data, h); + __raw_writeb(value, ptr); + (void)__raw_readb(ptr); /* Defeat write posting */ local_irq_restore(flags); return 0; } @@ -130,12 +137,13 @@ static unsigned long modify_8(unsigned long addr, unsigned long h, static unsigned long modify_16(unsigned long addr, unsigned long h, unsigned long data) { + void __iomem *ptr = (void __iomem *)addr; unsigned long flags; unsigned int value; local_irq_save(flags); - value = intc_set_field_from_handle(__raw_readw(addr), data, h); - __raw_writew(value, addr); - (void)__raw_readw(addr); /* Defeat write posting */ + value = intc_set_field_from_handle(__raw_readw(ptr), data, h); + __raw_writew(value, ptr); + (void)__raw_readw(ptr); /* Defeat write posting */ local_irq_restore(flags); return 0; } @@ -143,12 +151,13 @@ static unsigned long modify_16(unsigned long addr, unsigned long h, static unsigned long modify_32(unsigned long addr, unsigned long h, unsigned long data) { + void __iomem *ptr = (void __iomem *)addr; unsigned long flags; unsigned int value; local_irq_save(flags); - value = intc_set_field_from_handle(__raw_readl(addr), data, h); - __raw_writel(value, addr); - (void)__raw_readl(addr); /* Defeat write posting */ + value = intc_set_field_from_handle(__raw_readl(ptr), data, h); + __raw_writel(value, ptr); + (void)__raw_readl(ptr); /* Defeat write posting */ local_irq_restore(flags); return 0; } diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index 012df26..46427b4 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -83,7 +83,7 @@ static void intc_mask_ack(struct irq_data *data) unsigned int irq = data->irq; struct intc_desc_int *d = get_intc_desc(irq); unsigned long handle = intc_get_ack_handle(irq); - unsigned long addr; + void __iomem *addr; intc_disable(data); @@ -91,7 +91,7 @@ static void intc_mask_ack(struct irq_data *data) if (handle) { unsigned int value; - addr = INTC_REG(d, _INTC_ADDR_D(handle), 0); + addr = (void __iomem *)INTC_REG(d, _INTC_ADDR_D(handle), 0); value = intc_set_field_from_handle(0, 1, handle); switch (_INTC_FN(handle)) { diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 9be296c..6ee5900 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -530,7 +530,8 @@ static inline int sci_rxd_in(struct uart_port *port) if (s->cfg->port_reg <= 0) return 1; - return !!__raw_readb(s->cfg->port_reg); + /* Cast for ARM damage */ + return !!__raw_readb((void __iomem *)s->cfg->port_reg); } /* ********************************************************************** * -- cgit v0.10.2 From 47dbec59c37ab02946a6db7ac30c3bf6ca02630c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Sep 2012 23:36:16 +0200 Subject: pinctrl: samsung: use __devinit section for init code The samsung pinctrl driver has a probe function that is __devinit and that calls a lot of other functions that are marked __init, which kbuild complains about. Marking everything __devinit means that the code does not discarded when CONFIG_HOTPLUG is set, which is a little more wasteful, but also more consistent Without this patch, building exynos_defconfig results in: WARNING: drivers/pinctrl/built-in.o(.devinit.text+0x124): Section mismatch in reference from the function samsung_pinctrl_probe() to the function .init.text:samsung_gpiolib_register() The function __devinit samsung_pinctrl_probe() references a function __init samsung_gpiolib_register(). If samsung_gpiolib_register is only used by samsung_pinctrl_probe then annotate samsung_gpiolib_register with a matching annotation. Signed-off-by: Arnd Bergmann Cc: Thomas Abraham Cc: Linus Walleij Cc: Stephen Warren Cc: Kukjin Kim Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index dd108a9..861cd5f 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -513,7 +513,7 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset, * Parse the pin names listed in the 'samsung,pins' property and convert it * into a list of gpio numbers are create a pin group from it. */ -static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, +static int __devinit samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, struct device_node *cfg_np, struct pinctrl_desc *pctl, unsigned int **pin_list, unsigned int *npins) { @@ -560,7 +560,7 @@ static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, * from device node of the pin-controller. A pin group is formed with all * the pins listed in the "samsung,pins" property. */ -static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev, +static int __devinit samsung_pinctrl_parse_dt(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct device *dev = &pdev->dev; @@ -655,7 +655,7 @@ static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev, } /* register the pinctrl interface with the pinctrl subsystem */ -static int __init samsung_pinctrl_register(struct platform_device *pdev, +static int __devinit samsung_pinctrl_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct pinctrl_desc *ctrldesc = &drvdata->pctl; @@ -729,7 +729,7 @@ static int __init samsung_pinctrl_register(struct platform_device *pdev, } /* register the gpiolib interface with the gpiolib subsystem */ -static int __init samsung_gpiolib_register(struct platform_device *pdev, +static int __devinit samsung_gpiolib_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct gpio_chip *gc; @@ -762,7 +762,7 @@ static int __init samsung_gpiolib_register(struct platform_device *pdev, } /* unregister the gpiolib interface with the gpiolib subsystem */ -static int __init samsung_gpiolib_unregister(struct platform_device *pdev, +static int __devinit samsung_gpiolib_unregister(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { int ret = gpiochip_remove(drvdata->gc); -- cgit v0.10.2 From 8c6871979d903b8b0e4cd78a59d84afc262611bf Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 8 Oct 2012 11:40:36 +0200 Subject: pinctrl: bcm2835: Use existing pointer to struct device The pointer to "pdev->dev" is already stored in "dev", so use it in devm_request_and_ioremap(). Signed-off-by: Tobias Klauser Acked-by: Stephen Warren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index a4adee6..3e0cc0d 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -960,7 +960,7 @@ static int __devinit bcm2835_pinctrl_probe(struct platform_device *pdev) return err; } - pc->base = devm_request_and_ioremap(&pdev->dev, &iomem); + pc->base = devm_request_and_ioremap(dev, &iomem); if (!pc->base) return -EADDRNOTAVAIL; -- cgit v0.10.2 From 1cd6dc2e3c2dbececb60a3a5ca52af645d9be205 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 7 Oct 2012 21:28:20 +0800 Subject: pinctrl: remove duplicated include from pinctrl-bcm2835.c Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Acked-by: Stephen Warren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index 3e0cc0d..956d585 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 3ee73aa077d1468b293bb208814a8c240eefa9b7 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 7 Oct 2012 22:01:15 +0800 Subject: pinctrl: fix return value in bcm2835_pinctrl_probe() In case of error, the function pinctrl_register() returns NULL not ERR_PTR(). The PTR_ERR() in the return value should be replaced with error no. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Acked-by: Stephen Warren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index 956d585..7e9be18 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -1031,7 +1031,7 @@ static int __devinit bcm2835_pinctrl_probe(struct platform_device *pdev) pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc); if (!pc->pctl_dev) { gpiochip_remove(&pc->gpio_chip); - return PTR_ERR(pc->pctl_dev); + return -EINVAL; } pc->gpio_range = bcm2835_pinctrl_gpio_range; -- cgit v0.10.2 From 7bec207427c2efb79471a2e80906aabd132fd460 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 9 Oct 2012 15:35:56 +0000 Subject: pinctrl: sirf: remove sirfsoc_gpio_set_pull function The prima2 platform advertises needing no mach/gpio.h header file, but its pinctrl driver now has a sirfsoc_gpio_set_pull function that uses constants defined in arch/arm/mach-prima2/include/mach/gpio.h, which fails to build. Fortunately, the sirfsoc_gpio_set_pull is not used anywhere in the kernel, so we can safely remove it. Any out of tree drivers using it will have to be converted to use proper pinctrl functions to do the same. Without this patch, building prima2_defconfig results in: drivers/pinctrl/pinctrl-sirf.c: In function 'sirfsoc_gpio_set_pull': drivers/pinctrl/pinctrl-sirf.c:1331:7: error: 'SIRFSOC_GPIO_PULL_NONE' undeclared (first use in this function) drivers/pinctrl/pinctrl-sirf.c:1331:7: note: each undeclared identifier is reported only once for each function it appears in drivers/pinctrl/pinctrl-sirf.c:1334:7: error: 'SIRFSOC_GPIO_PULL_UP' undeclared (first use in this function) drivers/pinctrl/pinctrl-sirf.c:1338:7: error: 'SIRFSOC_GPIO_PULL_DOWN' undeclared (first use in this function) Signed-off-by: Arnd Bergmann Acked-by: Barry Song Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h deleted file mode 100644 index 1904bb0..0000000 --- a/arch/arm/mach-prima2/include/mach/gpio.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_GPIO_H -#define __MACH_GPIO_H - -/* Pull up/down values */ -enum sirfsoc_gpio_pull { - SIRFSOC_GPIO_PULL_NONE, - SIRFSOC_GPIO_PULL_UP, - SIRFSOC_GPIO_PULL_DOWN, -}; - -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode); - -#endif diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index 675497c..9ecacf3 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -1323,41 +1323,6 @@ static inline struct sirfsoc_gpio_bank *sirfsoc_gpio_to_bank(unsigned int gpio) return &sgpio_bank[gpio / SIRFSOC_GPIO_BANK_SIZE]; } -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode) -{ - struct sirfsoc_gpio_bank *bank = sirfsoc_gpio_to_bank(gpio); - int idx = sirfsoc_gpio_to_offset(gpio); - u32 val, offset; - unsigned long flags; - - offset = SIRFSOC_GPIO_CTRL(bank->id, idx); - - spin_lock_irqsave(&sgpio_lock, flags); - - val = readl(bank->chip.regs + offset); - - switch (mode) { - case SIRFSOC_GPIO_PULL_NONE: - val &= ~SIRFSOC_GPIO_CTL_PULL_MASK; - break; - case SIRFSOC_GPIO_PULL_UP: - val |= SIRFSOC_GPIO_CTL_PULL_MASK; - val |= SIRFSOC_GPIO_CTL_PULL_HIGH; - break; - case SIRFSOC_GPIO_PULL_DOWN: - val |= SIRFSOC_GPIO_CTL_PULL_MASK; - val &= ~SIRFSOC_GPIO_CTL_PULL_HIGH; - break; - default: - break; - } - - writel(val, bank->chip.regs + offset); - - spin_unlock_irqrestore(&sgpio_lock, flags); -} -EXPORT_SYMBOL(sirfsoc_gpio_set_pull); - static inline struct sirfsoc_gpio_bank *sirfsoc_irqchip_to_bank(struct gpio_chip *chip) { return container_of(to_of_mm_gpio_chip(chip), struct sirfsoc_gpio_bank, chip); -- cgit v0.10.2 From b51b16a36fd8fd27b2e392a86f2637deaaf4267f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 10 Oct 2012 20:59:32 +0800 Subject: pinctrl: remove duplicated include from pinctrl-xway.c Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index f8d917d..b9bcaec 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -17,8 +17,6 @@ #include #include #include -#include -#include #include #include "pinctrl-lantiq.h" -- cgit v0.10.2 From b7213702662e2139be92c4a3efe6682529f7a729 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 11 Oct 2012 14:33:42 +0200 Subject: pinctrl/nomadik: provide stubs for legacy Nomadik The compilation of the pinctrl driver failed on the legacy Nomadik NHK8815 platform because it was not providing the PRCMU interfaces needed to support the extended alternate functions used by the ux500 series. Solve this by providing some stubs for the legacy platform, to avoid too much #ifdefs in the code per se. Theoretically this actually allows the Nomadik and Ux500 to have a single kernel image with support for the PRCM registers on the Ux500 (though they have incompatible archs, but the spirit is there). Reported-by: Arnd Bergmann Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index fec9c30..f640f13 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -30,7 +30,20 @@ #include /* Since we request GPIOs from ourself */ #include +/* + * For the U8500 archs, use the PRCMU register interface, for the older + * Nomadik, provide some stubs. The functions using these will only be + * called on the U8500 series. + */ +#ifdef CONFIG_ARCH_U8500 #include +#else +static inline u32 prcmu_read(unsigned int reg) { + return 0; +} +static inline void prcmu_write(unsigned int reg, u32 value) {} +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {} +#endif #include -- cgit v0.10.2 From 51f58c68a364363b29c07668c90af19c9b8a8c85 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 11 Oct 2012 16:33:44 +0200 Subject: pinctrl/nomadik: always use the simple irqdomain Since the simple irqdomain will fall back to a linear domain if the first_irq provided is <= 0, just use this, just make sure the first_irq is negative in the device tree case. Cc: Rob Herring Acked-by: Lee Jones Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index f640f13..01aea1c 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1281,6 +1281,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) struct clk *clk; int secondary_irq; void __iomem *base; + int irq_start = -1; int irq; int ret; @@ -1384,19 +1385,11 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); - if (np) { - /* The DT case will just grab a set of IRQ numbers */ - nmk_chip->domain = irq_domain_add_linear(np, NMK_GPIO_PER_CHIP, - &nmk_gpio_irq_simple_ops, nmk_chip); - } else { - /* Non-DT legacy mode, use hardwired IRQ numbers */ - int irq_start; - + if (!np) irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio); - nmk_chip->domain = irq_domain_add_simple(NULL, + nmk_chip->domain = irq_domain_add_simple(NULL, NMK_GPIO_PER_CHIP, irq_start, &nmk_gpio_irq_simple_ops, nmk_chip); - } if (!nmk_chip->domain) { dev_err(&dev->dev, "failed to create irqdomain\n"); ret = -ENOSYS; -- cgit v0.10.2 From 733a48e5ae5bf28b046fad984d458c747cbb8c21 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Oct 2012 16:43:40 +0200 Subject: ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new() Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44721 Signed-off-by: Takashi Iwai diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 9473fca..8b0f996 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1271,6 +1271,8 @@ static int snd_ac97_cvol_new(struct snd_card *card, char *name, int reg, unsigne tmp.index = ac97->num; kctl = snd_ctl_new1(&tmp, ac97); } + if (!kctl) + return -ENOMEM; if (reg >= AC97_PHONE && reg <= AC97_PCM) set_tlv_db_scale(kctl, db_scale_5bit_12db_max); else -- cgit v0.10.2 From e73fa21b4e6ce10934cc8016a9a512d7152a860b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Oct 2012 16:51:52 +0200 Subject: ALSA: hda - Clean up superfluous position_fix list entries The white-list entries of position_fix for ASUS laptops have been added just as a workaround for broken COMBO mode. Now the combo mode itself is disabled, we can safely remove these entries. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 6833835..69810b2 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2813,8 +2813,6 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), - SND_PCI_QUIRK(0x1043, 0x1ac3, "ASUS X53S", POS_FIX_POSBUF), - SND_PCI_QUIRK(0x1043, 0x1b43, "ASUS K53E", POS_FIX_POSBUF), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB), SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB), -- cgit v0.10.2 From 128960a9ad67e2d119738f5211956e0304517551 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Oct 2012 17:28:18 +0200 Subject: ALSA: hda - Fix registration race of VGA switcheroo Delay the registration of VGA switcheroo client to the end of the probing. Otherwise a too quick switching may result in Oops during probing. Also add the check of the return value from snd_hda_lock_devices(). Reported-and-tested-by: Daniel J Blueman Cc: [v3.5+] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 69810b2..ecf2775 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -501,6 +501,7 @@ struct azx { /* VGA-switcheroo setup */ unsigned int use_vga_switcheroo:1; + unsigned int vga_switcheroo_registered:1; unsigned int init_failed:1; /* delayed init failed */ unsigned int disabled:1; /* disabled by VGA-switcher */ @@ -2640,7 +2641,9 @@ static void azx_vs_set_state(struct pci_dev *pci, if (disabled) { azx_suspend(&pci->dev); chip->disabled = true; - snd_hda_lock_devices(chip->bus); + if (snd_hda_lock_devices(chip->bus)) + snd_printk(KERN_WARNING SFX + "Cannot lock devices!\n"); } else { snd_hda_unlock_devices(chip->bus); chip->disabled = false; @@ -2683,14 +2686,20 @@ static const struct vga_switcheroo_client_ops azx_vs_ops = { static int __devinit register_vga_switcheroo(struct azx *chip) { + int err; + if (!chip->use_vga_switcheroo) return 0; /* FIXME: currently only handling DIS controller * is there any machine with two switchable HDMI audio controllers? */ - return vga_switcheroo_register_audio_client(chip->pci, &azx_vs_ops, + err = vga_switcheroo_register_audio_client(chip->pci, &azx_vs_ops, VGA_SWITCHEROO_DIS, chip->bus != NULL); + if (err < 0) + return err; + chip->vga_switcheroo_registered = 1; + return 0; } #else #define init_vga_switcheroo(chip) /* NOP */ @@ -2712,7 +2721,8 @@ static int azx_free(struct azx *chip) if (use_vga_switcheroo(chip)) { if (chip->disabled && chip->bus) snd_hda_unlock_devices(chip->bus); - vga_switcheroo_unregister_client(chip->pci); + if (chip->vga_switcheroo_registered) + vga_switcheroo_unregister_client(chip->pci); } if (chip->initialized) { @@ -3060,14 +3070,6 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, } ok: - err = register_vga_switcheroo(chip); - if (err < 0) { - snd_printk(KERN_ERR SFX - "Error registering VGA-switcheroo client\n"); - azx_free(chip); - return err; - } - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); if (err < 0) { snd_printk(KERN_ERR SFX "Error creating device [card]!\n"); @@ -3338,6 +3340,13 @@ static int __devinit azx_probe(struct pci_dev *pci, if (pci_dev_run_wake(pci)) pm_runtime_put_noidle(&pci->dev); + err = register_vga_switcheroo(chip); + if (err < 0) { + snd_printk(KERN_ERR SFX + "Error registering VGA-switcheroo client\n"); + goto out_free; + } + dev++; return 0; -- cgit v0.10.2 From 0153d5a810ab335aae86acfe69722a7efc1db536 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 11 Oct 2012 10:49:12 +0200 Subject: netfilter: xt_CT: fix timeout setting with IPv6 This patch fixes ip6tables and the CT target if it is used to set some custom conntrack timeout policy for IPv6. Use xt_ct_find_proto which already handles the ip6tables case for us. Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index 16c7125..ae7f5da 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -180,9 +180,9 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, typeof(nf_ct_timeout_find_get_hook) timeout_find_get; struct ctnl_timeout *timeout; struct nf_conn_timeout *timeout_ext; - const struct ipt_entry *e = par->entryinfo; struct nf_conntrack_l4proto *l4proto; int ret = 0; + u8 proto; rcu_read_lock(); timeout_find_get = rcu_dereference(nf_ct_timeout_find_get_hook); @@ -192,9 +192,11 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, goto out; } - if (e->ip.invflags & IPT_INV_PROTO) { + proto = xt_ct_find_proto(par); + if (!proto) { ret = -EINVAL; - pr_info("You cannot use inversion on L4 protocol\n"); + pr_info("You must specify a L4 protocol, and not use " + "inversions on it.\n"); goto out; } @@ -214,7 +216,7 @@ xt_ct_set_timeout(struct nf_conn *ct, const struct xt_tgchk_param *par, /* Make sure the timeout policy matches any existing protocol tracker, * otherwise default to generic. */ - l4proto = __nf_ct_l4proto_find(par->family, e->ip.proto); + l4proto = __nf_ct_l4proto_find(par->family, proto); if (timeout->l4proto->l4proto != l4proto->l4proto) { ret = -EINVAL; pr_info("Timeout policy `%s' can only be used by L4 protocol " -- cgit v0.10.2 From 939ccba437da1726a5c8a5b702a47d473da927ae Mon Sep 17 00:00:00 2001 From: Elison Niven Date: Mon, 15 Oct 2012 00:44:48 +0000 Subject: netfilter: xt_nat: fix incorrect hooks for SNAT and DNAT targets In (c7232c9 netfilter: add protocol independent NAT core), the hooks were accidentally modified: SNAT hooks are POST_ROUTING and LOCAL_IN (before it was LOCAL_OUT). DNAT hooks are PRE_ROUTING and LOCAL_OUT (before it was LOCAL_IN). Signed-off-by: Elison Niven Signed-off-by: Sanket Shah Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_nat.c b/net/netfilter/xt_nat.c index 81aafa8..bea7464 100644 --- a/net/netfilter/xt_nat.c +++ b/net/netfilter/xt_nat.c @@ -111,7 +111,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .family = NFPROTO_IPV4, .table = "nat", .hooks = (1 << NF_INET_POST_ROUTING) | - (1 << NF_INET_LOCAL_OUT), + (1 << NF_INET_LOCAL_IN), .me = THIS_MODULE, }, { @@ -123,7 +123,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .family = NFPROTO_IPV4, .table = "nat", .hooks = (1 << NF_INET_PRE_ROUTING) | - (1 << NF_INET_LOCAL_IN), + (1 << NF_INET_LOCAL_OUT), .me = THIS_MODULE, }, { @@ -133,7 +133,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .targetsize = sizeof(struct nf_nat_range), .table = "nat", .hooks = (1 << NF_INET_POST_ROUTING) | - (1 << NF_INET_LOCAL_OUT), + (1 << NF_INET_LOCAL_IN), .me = THIS_MODULE, }, { @@ -143,7 +143,7 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = { .targetsize = sizeof(struct nf_nat_range), .table = "nat", .hooks = (1 << NF_INET_PRE_ROUTING) | - (1 << NF_INET_LOCAL_IN), + (1 << NF_INET_LOCAL_OUT), .me = THIS_MODULE, }, }; -- cgit v0.10.2 From 041d81f493d90c940ec41f0ec98bc7c4f2fba431 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 4 Oct 2012 11:58:00 +0300 Subject: usb: dwc3: gadget: fix 'endpoint always busy' bug If a USB transfer has already been started, meaning we have already issued StartTransfer command to that particular endpoint, DWC3_EP_BUSY flag has also already been set. When we try to cancel this transfer which is already in controller's cache, we will not receive XferComplete event and we must clear DWC3_EP_BUSY in order to allow subsequent requests to be properly started. The best place to clear that flag is right after issuing DWC3_DEPCMD_ENDTRANSFER. Cc: stable@vger.kernel.org # v3.4 v3.5 v3.6 Reported-by: Moiz Sonasath Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c9e729a..7b7dedd 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1904,7 +1904,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; - + dep->flags &= ~DWC3_EP_BUSY; udelay(100); } -- cgit v0.10.2 From 6ff1f3d3bd7c69c62ca5773b1b684bce42eff06a Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Mon, 15 Oct 2012 11:20:22 +0200 Subject: usb: musb: am35xx: drop spurious unplugging a device On AM3517, tx and rx interrupt are detected together with the disconnect event. This generates a kernel panic in musb_interrupt, because rx / tx are handled after disconnect. This issue was seen on a Technexion's TAM3517 SOM. Unplugging a device, tx / rx interrupts together with disconnect are detected. This brings to kernel panic like this: [ 68.526153] Unable to handle kernel NULL pointer dereference at virtual address 00000011 [ 68.534698] pgd = c0004000 [ 68.537536] [00000011] *pgd=00000000 [ 68.541351] Internal error: Oops: 17 [#1] ARM [ 68.545928] Modules linked in: [ 68.549163] CPU: 0 Not tainted (3.6.0-rc5-00020-g9e05905 #178) [ 68.555694] PC is at rxstate+0x8/0xdc [ 68.559539] LR is at musb_interrupt+0x98/0x858 [ 68.564239] pc : [] lr : [] psr: 40000193 [ 68.564239] sp : ce83fb40 ip : d0906410 fp : 00000000 [ 68.576293] r10: 00000000 r9 : cf3b0e40 r8 : 00000002 [ 68.581817] r7 : 00000019 r6 : 00000001 r5 : 00000001 r4 : 000000d4 [ 68.588684] r3 : 00000000 r2 : 00000000 r1 : ffffffcc r0 : cf23c108 [ 68.595550] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment ke Note: this behavior is not seen with a USB hub, while it is easy to reproduce connecting a USB-pen directly to the USB-A of the board. Drop tx / rx interrupts if disconnect is detected. Signed-off-by: Stefano Babic CC: Felipe Balbi Cc: stable@vger.kernel.org # 3.5 3.6 Tested-by: Dmitry Lifshitz Tested-by: Igor Grinberg Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 457f25e..c964d6a 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -305,6 +305,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) ret = IRQ_HANDLED; } + /* Drop spurious RX and TX if device is disconnected */ + if (musb->int_usb & MUSB_INTR_DISCONNECT) { + musb->int_tx = 0; + musb->int_rx = 0; + } + if (musb->int_tx || musb->int_rx || musb->int_usb) ret |= musb_interrupt(musb); -- cgit v0.10.2 From 44009105081b51417f311f4c3be0061870b6b8ed Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 Oct 2012 10:18:35 +0300 Subject: oprofile, x86: Fix wrapping bug in op_x86_get_ctrl() The "event" variable is a u16 so the shift will always wrap to zero making the line a no-op. Signed-off-by: Dan Carpenter Cc: v2.6.32.. Signed-off-by: Robert Richter diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 26b8a85..48768df 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -55,7 +55,7 @@ u64 op_x86_get_ctrl(struct op_x86_model_spec const *model, val |= counter_config->extra; event &= model->event_mask ? model->event_mask : 0xFF; val |= event & 0xFF; - val |= (event & 0x0F00) << 24; + val |= (u64)(event & 0x0F00) << 24; return val; } -- cgit v0.10.2 From 01b8daf71b2fd2f6ece5f063a089abf4b13f1d6e Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 13 Oct 2012 19:20:18 +0530 Subject: usb: dwc3: shutdown usb_phy when removing the device We call usb_phy_init() from dwc3_core_init() during probe, so adding usb_phy_shutdown() to dwc3_core_exit() while removing the device so we don't keep PHYs turned on, consuming power, unnecessarily. Signed-off-by: Vivek Gautam Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index b415c0c..c14ebc9 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -409,6 +409,10 @@ static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); dwc3_free_event_buffers(dwc); + + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + } #define DWC3_ALIGN_MASK (16 - 1) -- cgit v0.10.2 From 8fcdc31b3d09bc348ff9bf752ae1291828756cfa Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 11 Oct 2012 12:26:04 -0400 Subject: NFSv4.1: Kill nfs4_ds_disconnect() There is nothing to prevent another thread from dereferencing ds->ds_clp during or after the call to nfs4_ds_disconnect(), and Oopsing due to the resulting NULL pointer. Instead, we should just rely on filelayout_mark_devid_invalid() to keep us out of trouble by avoiding that deviceid. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 52d8472..816c2d0 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -207,7 +207,6 @@ static int filelayout_async_handle_error(struct rpc_task *task, clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags); _pnfs_return_layout(inode); rpc_wake_up(&tbl->slot_tbl_waitq); - nfs4_ds_disconnect(clp); /* fall through */ default: reset: diff --git a/fs/nfs/nfs4filelayout.h b/fs/nfs/nfs4filelayout.h index dca47d78..8c07241 100644 --- a/fs/nfs/nfs4filelayout.h +++ b/fs/nfs/nfs4filelayout.h @@ -149,6 +149,5 @@ extern void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr); extern void nfs4_fl_free_deviceid(struct nfs4_file_layout_dsaddr *dsaddr); struct nfs4_file_layout_dsaddr * filelayout_get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags); -void nfs4_ds_disconnect(struct nfs_client *clp); #endif /* FS_NFS_NFS4FILELAYOUT_H */ diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index 3336d5e..a8eaa9b 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -149,28 +149,6 @@ _data_server_lookup_locked(const struct list_head *dsaddrs) } /* - * Lookup DS by nfs_client pointer. Zero data server client pointer - */ -void nfs4_ds_disconnect(struct nfs_client *clp) -{ - struct nfs4_pnfs_ds *ds; - struct nfs_client *found = NULL; - - dprintk("%s clp %p\n", __func__, clp); - spin_lock(&nfs4_ds_cache_lock); - list_for_each_entry(ds, &nfs4_data_server_cache, ds_node) - if (ds->ds_clp && ds->ds_clp == clp) { - found = ds->ds_clp; - ds->ds_clp = NULL; - } - spin_unlock(&nfs4_ds_cache_lock); - if (found) { - set_bit(NFS_CS_STOP_RENEW, &clp->cl_res_state); - nfs_put_client(clp); - } -} - -/* * Create an rpc connection to the nfs4_pnfs_ds data server * Currently only supports IPv4 and IPv6 addresses */ -- cgit v0.10.2 From d527e5c15de8de813cd0a2ad0b769f68c6226938 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 11 Oct 2012 13:43:38 -0400 Subject: NFSv4.1: Do not call pnfs_return_layout() from an rpciod context Move the call to pnfs_return_layout() to the read and write rpc_release() callbacks, so that it gets called from nfsiod, which is a more appropriate context. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 816c2d0..e7aee56 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -122,12 +122,21 @@ static void filelayout_reset_read(struct nfs_read_data *data) } } +static void filelayout_fenceme(struct inode *inode, struct pnfs_layout_hdr *lo) +{ + if (!test_and_clear_bit(NFS_LAYOUT_RETURN, &lo->plh_flags)) + return; + clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags); + pnfs_return_layout(inode); +} + static int filelayout_async_handle_error(struct rpc_task *task, struct nfs4_state *state, struct nfs_client *clp, struct pnfs_layout_segment *lseg) { - struct inode *inode = lseg->pls_layout->plh_inode; + struct pnfs_layout_hdr *lo = lseg->pls_layout; + struct inode *inode = lo->plh_inode; struct nfs_server *mds_server = NFS_SERVER(inode); struct nfs4_deviceid_node *devid = FILELAYOUT_DEVID_NODE(lseg); struct nfs_client *mds_client = mds_server->nfs_client; @@ -204,8 +213,7 @@ static int filelayout_async_handle_error(struct rpc_task *task, dprintk("%s DS connection error %d\n", __func__, task->tk_status); nfs4_mark_deviceid_unavailable(devid); - clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags); - _pnfs_return_layout(inode); + set_bit(NFS_LAYOUT_RETURN, &lo->plh_flags); rpc_wake_up(&tbl->slot_tbl_waitq); /* fall through */ default: @@ -330,7 +338,9 @@ static void filelayout_read_count_stats(struct rpc_task *task, void *data) static void filelayout_read_release(void *data) { struct nfs_read_data *rdata = data; + struct pnfs_layout_hdr *lo = rdata->header->lseg->pls_layout; + filelayout_fenceme(lo->plh_inode, lo); nfs_put_client(rdata->ds_clp); rdata->header->mds_ops->rpc_release(data); } @@ -428,7 +438,9 @@ static void filelayout_write_count_stats(struct rpc_task *task, void *data) static void filelayout_write_release(void *data) { struct nfs_write_data *wdata = data; + struct pnfs_layout_hdr *lo = wdata->header->lseg->pls_layout; + filelayout_fenceme(lo->plh_inode, lo); nfs_put_client(wdata->ds_clp); wdata->header->mds_ops->rpc_release(data); } diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 2d722db..dbf7bba 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -62,6 +62,7 @@ enum { NFS_LAYOUT_RW_FAILED, /* get rw layout failed stop trying */ NFS_LAYOUT_BULK_RECALL, /* bulk recall affecting layout */ NFS_LAYOUT_ROC, /* some lseg had roc bit set */ + NFS_LAYOUT_RETURN, /* Return this layout ASAP */ }; enum layoutdriver_policy_flags { -- cgit v0.10.2 From 1813badd98ce02e4b96d8997b68ddef4d4ad4ec5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 11 Oct 2012 14:36:52 -0400 Subject: NFSv4.1: Use kcalloc() to allocate zeroed arrays instead of kzalloc() Don't circumvent the array size checks. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index e7aee56..2e45fd9 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -750,7 +750,7 @@ filelayout_decode_layout(struct pnfs_layout_hdr *flo, goto out_err; if (fl->num_fh > 0) { - fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *), + fl->fh_array = kcalloc(fl->num_fh, sizeof(fl->fh_array[0]), gfp_flags); if (!fl->fh_array) goto out_err; -- cgit v0.10.2 From 68687c842caefd5386d47a571fb4725df3556891 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 15 Oct 2012 00:16:49 +0100 Subject: ARM: fix oops on initial entry to userspace with Thumb2 kernels Daniel Mack reports an oops at boot with the latest kernels: Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2 Modules linked in: CPU: 0 Not tainted (3.6.0-11057-g584df1d #145) PC is at cpsw_probe+0x45a/0x9ac LR is at trace_hardirqs_on_caller+0x8f/0xfc pc : [] lr : [] psr: 60000113 sp : cf055fb0 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 00000000 r8 : 00000000 r7 : 00000000 r6 : 00000000 r5 : c0344555 r4 : 00000000 r3 : cf057a40 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 50c5387d Table: 8f3f4019 DAC: 00000015 Process init (pid: 1, stack limit = 0xcf054240) Stack: (0xcf055fb0 to 0xcf056000) 5fa0: 00000001 00000000 00000000 00000000 5fc0: cf055fb0 c000d1a8 00000000 00000000 00000000 00000000 00000000 00000000 5fe0: 00000000 be9b3f10 00000000 b6f6add0 00000010 00000000 aaaabfaf a8babbaa The analysis of this is as follows. In init/main.c, we issue: kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND); This creates a new thread, which falls through to the ret_from_fork assembly, with r4 set NULL and r5 set to kernel_init. You can see this in your oops dump register set - r5 is 0xc0344555, which is the address of kernel_init plus 1 which marks the function as Thumb code. Now, let's look at this code a little closer - this is what the disassembly looks like: c000d180 : c000d180: f03a fe08 bl c0047d94 c000d184: 2d00 cmp r5, #0 c000d186: bf1e ittt ne c000d188: 4620 movne r0, r4 c000d18a: 46fe movne lr, pc <-- XXXXXXX c000d18c: 46af movne pc, r5 c000d18e: 46e9 mov r9, sp c000d190: ea4f 3959 mov.w r9, r9, lsr #13 c000d194: ea4f 3949 mov.w r9, r9, lsl #13 c000d198: e7c8 b.n c000d12c c000d19a: bf00 nop c000d19c: f3af 8000 nop.w This code was introduced in 9fff2fa0db911 (arm: switch to saner kernel_execve() semantics). I have marked one instruction, and it's the significant one - I'll come back to that later. Eventually, having had a successful call to kernel_execve(), kernel_init() returns zero. In returning, it uses the value in 'lr' which was set by the instruction I marked above. Unfortunately, this causes lr to contain 0xc000d18e - an even address. This switches the ISA to ARM on return but with a non word aligned PC value. So, what do we end up executing? Well, not the instructions above - yes the opcodes, but they don't mean the same thing in ARM mode. In ARM mode, it looks like this instead: c000d18c: 46e946af strbtmi r4, [r9], pc, lsr #13 c000d190: 3959ea4f ldmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^ c000d194: 3949ea4f stmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^ c000d198: bf00e7c8 svclt 0x0000e7c8 c000d19c: 8000f3af andhi pc, r0, pc, lsr #7 c000d1a0: e88db092 stm sp, {r1, r4, r7, ip, sp, pc} c000d1a4: 46e81fff ; instruction: 0x46e81fff c000d1a8: 8a00f3ef bhi 0xc004a16c c000d1ac: 0a0cf08a beq 0xc03493dc I have included more above, because it's relevant. The PSR flags which we can see in the oops dump are nZCv, so Z and C are set. All the above ARM instructions are not executed, except for two. c000d1a0, which has no writeback, and writes below the current stack pointer (and that data is lost when we take the next exception.) The other instruction which is executed is c000d1ac, which takes us to... 0xc03493dc. However, remember that bit 1 of the PC got set. So that makes the PC value 0xc03493de. And that value is the value we find in the oops dump for PC. What is the instruction here when interpreted in ARM mode? 0: f71e150c ; instruction: 0xf71e150c and there we have our undefined instruction (remember that the 'never' condition code, 0xf, has been deprecated and is now always executed as it is now being used for additional instructions.) This path also nicely explains the state of the stack we see in the oops dump too. The above is a consistent and sane story for how we got to the oops dump, which all stems from the instruction at 0xc000d18a being wrong. Reported-by: Daniel Mack Tested-by: Daniel Mack Signed-off-by: Russell King Signed-off-by: Linus Torvalds diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 417bac1..3471175 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -88,9 +88,9 @@ ENTRY(ret_from_fork) bl schedule_tail cmp r5, #0 movne r0, r4 - movne lr, pc + adrne lr, BSYM(1f) movne pc, r5 - get_thread_info tsk +1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) -- cgit v0.10.2 From 325adeb55e32c50055c654e5b06a49f0bd88420b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 15 Oct 2012 13:44:56 +0200 Subject: mm: huge_memory: Fix build error. Certain configurations won't implicitly pull in resulting in the following build error: mm/huge_memory.c: In function 'release_pte_page': mm/huge_memory.c:1697:2: error: implicit declaration of function 'unlock_page' [-Werror=implicit-function-declaration] mm/huge_memory.c: In function '__collapse_huge_page_isolate': mm/huge_memory.c:1757:3: error: implicit declaration of function 'trylock_page' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Reported-by: David Daney Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds diff --git a/mm/huge_memory.c b/mm/huge_memory.c index a863af2..40f17c3 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include "internal.h" -- cgit v0.10.2 From 29bb4cc5e0547a7589556f8629e39016c5d203c0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 14 Oct 2012 18:50:05 -0700 Subject: docbook: networking: fix file paths for uapi headers Update file paths in Documentation/DocBook/networking.tmpl for uapi headers. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl index 59ad69a..29df250 100644 --- a/Documentation/DocBook/networking.tmpl +++ b/Documentation/DocBook/networking.tmpl @@ -56,7 +56,7 @@ !Enet/core/filter.c Generic Network Statistics -!Iinclude/linux/gen_stats.h +!Iinclude/uapi/linux/gen_stats.h !Enet/core/gen_stats.c !Enet/core/gen_estimator.c @@ -80,7 +80,7 @@ !Enet/wimax/op-rfkill.c !Enet/wimax/stack.c !Iinclude/net/wimax.h -!Iinclude/linux/wimax.h +!Iinclude/uapi/linux/wimax.h -- cgit v0.10.2 From 6863255bd0e48bc41ae5a066d5c771801e92735a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 15 Oct 2012 14:52:41 +0200 Subject: cfg80211/mac80211: avoid state mishmash on deauth Avoid situation when we are on associate state in mac80211 and on disassociate state in cfg80211. This can results on crash during modules unload (like showed on this thread: http://marc.info/?t=134373976300001&r=1&w=2) and possibly other problems. Reported-by: Pedro Francisco Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1b49890..f8cd4cf 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1218,6 +1218,7 @@ struct cfg80211_deauth_request { const u8 *ie; size_t ie_len; u16 reason_code; + bool local_state_change; }; /** diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e714ed8..e510a33 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3549,6 +3549,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; + bool tx = !req->local_state_change; mutex_lock(&ifmgd->mtx); @@ -3565,12 +3566,12 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, if (ifmgd->associated && ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, - req->reason_code, true, frame_buf); + req->reason_code, tx, frame_buf); } else { drv_mgd_prepare_tx(sdata->local, sdata); ieee80211_send_deauth_disassoc(sdata, req->bssid, IEEE80211_STYPE_DEAUTH, - req->reason_code, true, + req->reason_code, tx, frame_buf); } diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 8016fee..904a7f3 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -457,20 +457,14 @@ int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, .reason_code = reason, .ie = ie, .ie_len = ie_len, + .local_state_change = local_state_change, }; ASSERT_WDEV_LOCK(wdev); - if (local_state_change) { - if (wdev->current_bss && - ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { - cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); - wdev->current_bss = NULL; - } - + if (local_state_change && (!wdev->current_bss || + !ether_addr_equal(wdev->current_bss->pub.bssid, bssid))) return 0; - } return rdev->ops->deauth(&rdev->wiphy, dev, &req); } -- cgit v0.10.2 From 0b2ffb78c0ef83bb03f594fec2adc13ac6ac427b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Oct 2012 02:32:41 +0200 Subject: usb: gadget: Make webcam gadget select USB_LIBCOMPOSITE Composite gadget support is now available as a library instead of being built with each gadget. Composite drivers need to select USB_LIBCOMPOSITE. Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index dfb51a4..e0ff51b 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -952,6 +952,7 @@ endif config USB_G_WEBCAM tristate "USB Webcam Gadget" depends on VIDEO_DEV + select USB_LIBCOMPOSITE help The Webcam Gadget acts as a composite USB Audio and Video Class device. It provides a userspace API to process UVC control requests -- cgit v0.10.2 From 8282da478966975a5efff3eeb650a49fe67fa14e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Oct 2012 02:32:42 +0200 Subject: MAINTAINERS: Add maintainer entry for the USB webcam gadget Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index e73060f..bfac52f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7731,6 +7731,13 @@ W: http://www.ideasonboard.org/uvc/ S: Maintained F: drivers/media/usb/uvc/ +USB WEBCAM GADGET +M: Laurent Pinchart +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/gadget/*uvc*.c +F: drivers/usb/gadget/webcam.c + USB WIRELESS RNDIS DRIVER (rndis_wlan) M: Jussi Kivilinna L: linux-wireless@vger.kernel.org -- cgit v0.10.2 From 76495ec1d47e1c0fe0673faf9179bda6bc8ab5c2 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Mon, 15 Oct 2012 12:56:49 -0400 Subject: ext4: fix undefined bit shift result in ext4_fill_flex_info The result of the bit shift expression in '1 << sbi->s_log_groups_per_flex' can be undefined in the case that s_log_groups_per_flex is 31 because the result of the shift is bigger than INT_MAX. In reality this probably should not cause much problems since we'll end up with INT_MIN which will then be converted into 'unsigned int' type, but nevertheless according to the ISO C99 the result is actually undefined. Fix this by changing the left operand to 'unsigned int' type. Note that the commit d50f2ab6f050311dbf7b8f5501b25f0bf64a439b already tried to fix the undefined behaviour, but this was missed. Thanks to Laszlo Ersek for pointing this out and suggesting the fix. Signed-off-by: Lukas Czerner Signed-off-by: "Theodore Ts'o" Reviewed-by: Carlos Maiolino Reported-by: Laszlo Ersek diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 5ededf1..8ab650b 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1970,7 +1970,7 @@ static int ext4_fill_flex_info(struct super_block *sb) sbi->s_log_groups_per_flex = 0; return 1; } - groups_per_flex = 1 << sbi->s_log_groups_per_flex; + groups_per_flex = 1U << sbi->s_log_groups_per_flex; err = ext4_alloc_flex_bg_array(sb, sbi->s_groups_count); if (err) -- cgit v0.10.2 From a1871936c0f4f10850a5671c5deb1a92fcca1155 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Wed, 3 Oct 2012 15:00:19 +0200 Subject: drm/radeon: use %zu for formatting size_t Fixes compiler warnings on 32bit. Signed-off-by: Luca Tettamanti Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index b0a5688..ecb7e33 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -201,7 +201,7 @@ static int radeon_atif_verify_interface(acpi_handle handle, size = *(u16 *) info->buffer.pointer; if (size < 12) { - DRM_INFO("ATIF buffer is too small: %lu\n", size); + DRM_INFO("ATIF buffer is too small: %zu\n", size); err = -EINVAL; goto out; } @@ -485,7 +485,7 @@ static int radeon_atcs_verify_interface(acpi_handle handle, size = *(u16 *) info->buffer.pointer; if (size < 8) { - DRM_INFO("ATCS buffer is too small: %lu\n", size); + DRM_INFO("ATCS buffer is too small: %zu\n", size); err = -EINVAL; goto out; } -- cgit v0.10.2 From cd23492af3d4401c02c48a4bebe5995c9498eac5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 4 Oct 2012 09:10:10 -0400 Subject: drm/radeon: fix compilation with backlight disabled Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index ecb7e33..196d28d 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -370,6 +370,7 @@ int radeon_atif_handler(struct radeon_device *rdev, radeon_set_backlight_level(rdev, enc, req.backlight_level); +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) if (rdev->is_atom_bios) { struct radeon_encoder_atom_dig *dig = enc->enc_priv; backlight_force_update(dig->bl_dev, @@ -379,6 +380,7 @@ int radeon_atif_handler(struct radeon_device *rdev, backlight_force_update(dig->bl_dev, BACKLIGHT_UPDATE_HOTKEY); } +#endif } } /* TODO: check other events */ diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 92487e6..fb15b62 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -269,27 +269,6 @@ static const struct drm_encoder_helper_funcs radeon_legacy_lvds_helper_funcs = { .disable = radeon_legacy_encoder_disable, }; -#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) - -static uint8_t radeon_legacy_lvds_level(struct backlight_device *bd) -{ - struct radeon_backlight_privdata *pdata = bl_get_data(bd); - uint8_t level; - - /* Convert brightness to hardware level */ - if (bd->props.brightness < 0) - level = 0; - else if (bd->props.brightness > RADEON_MAX_BL_LEVEL) - level = RADEON_MAX_BL_LEVEL; - else - level = bd->props.brightness; - - if (pdata->negative) - level = RADEON_MAX_BL_LEVEL - level; - - return level; -} - u8 radeon_legacy_get_backlight_level(struct radeon_encoder *radeon_encoder) { @@ -331,6 +310,27 @@ radeon_legacy_set_backlight_level(struct radeon_encoder *radeon_encoder, u8 leve radeon_legacy_lvds_update(&radeon_encoder->base, dpms_mode); } +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) + +static uint8_t radeon_legacy_lvds_level(struct backlight_device *bd) +{ + struct radeon_backlight_privdata *pdata = bl_get_data(bd); + uint8_t level; + + /* Convert brightness to hardware level */ + if (bd->props.brightness < 0) + level = 0; + else if (bd->props.brightness > RADEON_MAX_BL_LEVEL) + level = RADEON_MAX_BL_LEVEL; + else + level = bd->props.brightness; + + if (pdata->negative) + level = RADEON_MAX_BL_LEVEL - level; + + return level; +} + static int radeon_legacy_backlight_update_status(struct backlight_device *bd) { struct radeon_backlight_privdata *pdata = bl_get_data(bd); -- cgit v0.10.2 From 29dbe3bcd2e28e71823febdca989d63d5c27d152 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 5 Oct 2012 10:22:02 -0400 Subject: drm/radeon: allocate PPLLs from low to high The order shouldn't matter, but there have been problems reported on certain older asics. This behaves more like the original code before the PPLL allocation rework. Signed-off-by: Alex Deucher Cc: Markus Trippelsdorf diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 96184d0..2e566e1 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1690,10 +1690,10 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) } /* all other cases */ pll_in_use = radeon_get_pll_use_mask(crtc); - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; if (!(pll_in_use & (1 << ATOM_PPLL1))) return ATOM_PPLL1; + if (!(pll_in_use & (1 << ATOM_PPLL2))) + return ATOM_PPLL2; DRM_ERROR("unable to allocate a PPLL\n"); return ATOM_PPLL_INVALID; } else { @@ -1715,10 +1715,10 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) } /* all other cases */ pll_in_use = radeon_get_pll_use_mask(crtc); - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; if (!(pll_in_use & (1 << ATOM_PPLL1))) return ATOM_PPLL1; + if (!(pll_in_use & (1 << ATOM_PPLL2))) + return ATOM_PPLL2; DRM_ERROR("unable to allocate a PPLL\n"); return ATOM_PPLL_INVALID; } else { -- cgit v0.10.2 From 23d4f1f246a98dde1dc485e0be9a647126630347 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Oct 2012 09:45:46 -0400 Subject: drm/radeon: update comments to clarify VM setup (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The actual set up and assignment of VM page tables is done on the fly in radeon_gart.c. v2: update vm size comments Signed-off-by: Alex Deucher Reviewed-by: Christian König diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 8bcb554..83dc085 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -770,6 +770,10 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) WREG32(0x15DC, 0); /* empty context1-7 */ + /* Assign the pt base to something valid for now; the pts used for + * the VMs are determined by the application and setup and assigned + * on the fly in the vm part of radeon_gart.c + */ for (i = 1; i < 8; i++) { WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (i << 2), 0); WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), 0); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 64a4264..bd13ca0 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1018,6 +1018,10 @@ int radeon_device_init(struct radeon_device *rdev, return r; /* initialize vm here */ mutex_init(&rdev->vm_manager.lock); + /* Adjust VM size here. + * Currently set to 4GB ((1 << 20) 4k pages). + * Max GPUVM size for cayman and SI is 40 bits. + */ rdev->vm_manager.max_pfn = 1 << 20; INIT_LIST_HEAD(&rdev->vm_manager.lru_vm); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index f79633a..df8dd77 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2407,12 +2407,13 @@ static int si_pcie_gart_enable(struct radeon_device *rdev) WREG32(0x15DC, 0); /* empty context1-15 */ - /* FIXME start with 4G, once using 2 level pt switch to full - * vm size space - */ /* set vm size, must be a multiple of 4 */ WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0); WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn); + /* Assign the pt base to something valid for now; the pts used for + * the VMs are determined by the application and setup and assigned + * on the fly in the vm part of radeon_gart.c + */ for (i = 1; i < 16; i++) { if (i < 8) WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), -- cgit v0.10.2 From 90a51a329258e3c868f6f4c1fb264ca01c590c57 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 9 Oct 2012 13:31:17 +0200 Subject: drm/radeon: allocate page tables on demand v4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on Dmitries work, but splitting the code into page directory and page table handling makes it far more readable and (hopefully) more reliable. Allocations of page tables are made from the SA on demand, that should still work fine since all page tables are of the same size. Also using the fact that allocations from the SA are mostly continuously (except for end of buffer wraps and under very high memory pressure) to group updates send to the chipset specific code into larger chunks. v3: mostly a rewrite of Dmitries previous patch. v4: fix some typos and coding style Signed-off-by: Dmitry Cherkasov Signed-off-by: Christian König Tested-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 83dc085..ab8d1f5 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1580,7 +1580,7 @@ void cayman_vm_flush(struct radeon_device *rdev, int ridx, struct radeon_vm *vm) radeon_ring_write(ring, 0); radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (vm->id << 2), 0)); - radeon_ring_write(ring, vm->last_pfn); + radeon_ring_write(ring, rdev->vm_manager.max_pfn); radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (vm->id << 2), 0)); radeon_ring_write(ring, vm->pd_gpu_addr >> 12); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index b04c064..bc6b56b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -663,9 +663,14 @@ struct radeon_vm { struct list_head list; struct list_head va; unsigned id; - unsigned last_pfn; - u64 pd_gpu_addr; - struct radeon_sa_bo *sa_bo; + + /* contains the page directory */ + struct radeon_sa_bo *page_directory; + uint64_t pd_gpu_addr; + + /* array of page tables, one for each page directory entry */ + struct radeon_sa_bo **page_tables; + struct mutex mutex; /* last fence for cs using this vm */ struct radeon_fence *fence; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index f0c06d1..98b170a 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -423,6 +423,18 @@ void radeon_gart_fini(struct radeon_device *rdev) */ /** + * radeon_vm_num_pde - return the number of page directory entries + * + * @rdev: radeon_device pointer + * + * Calculate the number of page directory entries (cayman+). + */ +static unsigned radeon_vm_num_pdes(struct radeon_device *rdev) +{ + return rdev->vm_manager.max_pfn >> RADEON_VM_BLOCK_SIZE; +} + +/** * radeon_vm_directory_size - returns the size of the page directory in bytes * * @rdev: radeon_device pointer @@ -431,7 +443,7 @@ void radeon_gart_fini(struct radeon_device *rdev) */ static unsigned radeon_vm_directory_size(struct radeon_device *rdev) { - return (rdev->vm_manager.max_pfn >> RADEON_VM_BLOCK_SIZE) * 8; + return RADEON_GPU_PAGE_ALIGN(radeon_vm_num_pdes(rdev) * 8); } /** @@ -451,11 +463,11 @@ int radeon_vm_manager_init(struct radeon_device *rdev) if (!rdev->vm_manager.enabled) { /* allocate enough for 2 full VM pts */ - size = RADEON_GPU_PAGE_ALIGN(radeon_vm_directory_size(rdev)); - size += RADEON_GPU_PAGE_ALIGN(rdev->vm_manager.max_pfn * 8); + size = radeon_vm_directory_size(rdev); + size += rdev->vm_manager.max_pfn * 8; size *= 2; r = radeon_sa_bo_manager_init(rdev, &rdev->vm_manager.sa_manager, - size, + RADEON_GPU_PAGE_ALIGN(size), RADEON_GEM_DOMAIN_VRAM); if (r) { dev_err(rdev->dev, "failed to allocate vm bo (%dKB)\n", @@ -476,7 +488,7 @@ int radeon_vm_manager_init(struct radeon_device *rdev) /* restore page table */ list_for_each_entry(vm, &rdev->vm_manager.lru_vm, list) { - if (vm->sa_bo == NULL) + if (vm->page_directory == NULL) continue; list_for_each_entry(bo_va, &vm->va, vm_list) { @@ -500,16 +512,25 @@ static void radeon_vm_free_pt(struct radeon_device *rdev, struct radeon_vm *vm) { struct radeon_bo_va *bo_va; + int i; - if (!vm->sa_bo) + if (!vm->page_directory) return; list_del_init(&vm->list); - radeon_sa_bo_free(rdev, &vm->sa_bo, vm->fence); + radeon_sa_bo_free(rdev, &vm->page_directory, vm->fence); list_for_each_entry(bo_va, &vm->va, vm_list) { bo_va->valid = false; } + + if (vm->page_tables == NULL) + return; + + for (i = 0; i < radeon_vm_num_pdes(rdev); i++) + radeon_sa_bo_free(rdev, &vm->page_tables[i], vm->fence); + + kfree(vm->page_tables); } /** @@ -546,6 +567,35 @@ void radeon_vm_manager_fini(struct radeon_device *rdev) } /** + * radeon_vm_evict - evict page table to make room for new one + * + * @rdev: radeon_device pointer + * @vm: VM we want to allocate something for + * + * Evict a VM from the lru, making sure that it isn't @vm. (cayman+). + * Returns 0 for success, -ENOMEM for failure. + * + * Global and local mutex must be locked! + */ +int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm) +{ + struct radeon_vm *vm_evict; + + if (list_empty(&rdev->vm_manager.lru_vm)) + return -ENOMEM; + + vm_evict = list_first_entry(&rdev->vm_manager.lru_vm, + struct radeon_vm, list); + if (vm_evict == vm) + return -ENOMEM; + + mutex_lock(&vm_evict->mutex); + radeon_vm_free_pt(rdev, vm_evict); + mutex_unlock(&vm_evict->mutex); + return 0; +} + +/** * radeon_vm_alloc_pt - allocates a page table for a VM * * @rdev: radeon_device pointer @@ -559,20 +609,15 @@ void radeon_vm_manager_fini(struct radeon_device *rdev) */ int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm) { - struct radeon_vm *vm_evict; - int r; + unsigned pd_size, pts_size; u64 *pd_addr; - int tables_size; + int r; if (vm == NULL) { return -EINVAL; } - /* allocate enough to cover the current VM size */ - tables_size = RADEON_GPU_PAGE_ALIGN(radeon_vm_directory_size(rdev)); - tables_size += RADEON_GPU_PAGE_ALIGN(vm->last_pfn * 8); - - if (vm->sa_bo != NULL) { + if (vm->page_directory != NULL) { /* update lru */ list_del_init(&vm->list); list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); @@ -580,25 +625,34 @@ int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm) } retry: - r = radeon_sa_bo_new(rdev, &rdev->vm_manager.sa_manager, &vm->sa_bo, - tables_size, RADEON_GPU_PAGE_SIZE, false); + pd_size = RADEON_GPU_PAGE_ALIGN(radeon_vm_directory_size(rdev)); + r = radeon_sa_bo_new(rdev, &rdev->vm_manager.sa_manager, + &vm->page_directory, pd_size, + RADEON_GPU_PAGE_SIZE, false); if (r == -ENOMEM) { - if (list_empty(&rdev->vm_manager.lru_vm)) { + r = radeon_vm_evict(rdev, vm); + if (r) return r; - } - vm_evict = list_first_entry(&rdev->vm_manager.lru_vm, struct radeon_vm, list); - mutex_lock(&vm_evict->mutex); - radeon_vm_free_pt(rdev, vm_evict); - mutex_unlock(&vm_evict->mutex); goto retry; } else if (r) { return r; } - pd_addr = radeon_sa_bo_cpu_addr(vm->sa_bo); - vm->pd_gpu_addr = radeon_sa_bo_gpu_addr(vm->sa_bo); - memset(pd_addr, 0, tables_size); + vm->pd_gpu_addr = radeon_sa_bo_gpu_addr(vm->page_directory); + + /* Initially clear the page directory */ + pd_addr = radeon_sa_bo_cpu_addr(vm->page_directory); + memset(pd_addr, 0, pd_size); + + pts_size = radeon_vm_num_pdes(rdev) * sizeof(struct radeon_sa_bo *); + vm->page_tables = kzalloc(pts_size, GFP_KERNEL); + + if (vm->page_tables == NULL) { + DRM_ERROR("Cannot allocate memory for page table array\n"); + radeon_sa_bo_free(rdev, &vm->page_directory, vm->fence); + return -ENOMEM; + } list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); return radeon_vm_bo_update_pte(rdev, vm, rdev->ring_tmp_bo.bo, @@ -793,20 +847,6 @@ int radeon_vm_bo_set_addr(struct radeon_device *rdev, } mutex_lock(&vm->mutex); - if (last_pfn > vm->last_pfn) { - /* release mutex and lock in right order */ - mutex_unlock(&vm->mutex); - mutex_lock(&rdev->vm_manager.lock); - mutex_lock(&vm->mutex); - /* and check again */ - if (last_pfn > vm->last_pfn) { - /* grow va space 32M by 32M */ - unsigned align = ((32 << 20) >> 12) - 1; - radeon_vm_free_pt(rdev, vm); - vm->last_pfn = (last_pfn + align) & ~align; - } - mutex_unlock(&rdev->vm_manager.lock); - } head = &vm->va; last_offset = 0; list_for_each_entry(tmp, &vm->va, vm_list) { @@ -865,6 +905,155 @@ uint64_t radeon_vm_map_gart(struct radeon_device *rdev, uint64_t addr) } /** + * radeon_vm_update_pdes - make sure that page directory is valid + * + * @rdev: radeon_device pointer + * @vm: requested vm + * @start: start of GPU address range + * @end: end of GPU address range + * + * Allocates new page tables if necessary + * and updates the page directory (cayman+). + * Returns 0 for success, error for failure. + * + * Global and local mutex must be locked! + */ +static int radeon_vm_update_pdes(struct radeon_device *rdev, + struct radeon_vm *vm, + uint64_t start, uint64_t end) +{ + static const uint32_t incr = RADEON_VM_PTE_COUNT * 8; + + uint64_t last_pde = ~0, last_pt = ~0; + unsigned count = 0; + uint64_t pt_idx; + int r; + + start = (start / RADEON_GPU_PAGE_SIZE) >> RADEON_VM_BLOCK_SIZE; + end = (end / RADEON_GPU_PAGE_SIZE) >> RADEON_VM_BLOCK_SIZE; + + /* walk over the address space and update the page directory */ + for (pt_idx = start; pt_idx <= end; ++pt_idx) { + uint64_t pde, pt; + + if (vm->page_tables[pt_idx]) + continue; + +retry: + r = radeon_sa_bo_new(rdev, &rdev->vm_manager.sa_manager, + &vm->page_tables[pt_idx], + RADEON_VM_PTE_COUNT * 8, + RADEON_GPU_PAGE_SIZE, false); + + if (r == -ENOMEM) { + r = radeon_vm_evict(rdev, vm); + if (r) + return r; + goto retry; + } else if (r) { + return r; + } + + pde = vm->pd_gpu_addr + pt_idx * 8; + + pt = radeon_sa_bo_gpu_addr(vm->page_tables[pt_idx]); + + if (((last_pde + 8 * count) != pde) || + ((last_pt + incr * count) != pt)) { + + if (count) { + radeon_asic_vm_set_page(rdev, last_pde, + last_pt, count, incr, + RADEON_VM_PAGE_VALID); + } + + count = 1; + last_pde = pde; + last_pt = pt; + } else { + ++count; + } + } + + if (count) { + radeon_asic_vm_set_page(rdev, last_pde, last_pt, count, + incr, RADEON_VM_PAGE_VALID); + + } + + return 0; +} + +/** + * radeon_vm_update_ptes - make sure that page tables are valid + * + * @rdev: radeon_device pointer + * @vm: requested vm + * @start: start of GPU address range + * @end: end of GPU address range + * @dst: destination address to map to + * @flags: mapping flags + * + * Update the page tables in the range @start - @end (cayman+). + * + * Global and local mutex must be locked! + */ +static void radeon_vm_update_ptes(struct radeon_device *rdev, + struct radeon_vm *vm, + uint64_t start, uint64_t end, + uint64_t dst, uint32_t flags) +{ + static const uint64_t mask = RADEON_VM_PTE_COUNT - 1; + + uint64_t last_pte = ~0, last_dst = ~0; + unsigned count = 0; + uint64_t addr; + + start = start / RADEON_GPU_PAGE_SIZE; + end = end / RADEON_GPU_PAGE_SIZE; + + /* walk over the address space and update the page tables */ + for (addr = start; addr < end; ) { + uint64_t pt_idx = addr >> RADEON_VM_BLOCK_SIZE; + unsigned nptes; + uint64_t pte; + + if ((addr & ~mask) == (end & ~mask)) + nptes = end - addr; + else + nptes = RADEON_VM_PTE_COUNT - (addr & mask); + + pte = radeon_sa_bo_gpu_addr(vm->page_tables[pt_idx]); + pte += (addr & mask) * 8; + + if (((last_pte + 8 * count) != pte) || + ((count + nptes) > 1 << 11)) { + + if (count) { + radeon_asic_vm_set_page(rdev, last_pte, + last_dst, count, + RADEON_GPU_PAGE_SIZE, + flags); + } + + count = nptes; + last_pte = pte; + last_dst = dst; + } else { + count += nptes; + } + + addr += nptes; + dst += nptes * RADEON_GPU_PAGE_SIZE; + } + + if (count) { + radeon_asic_vm_set_page(rdev, last_pte, last_dst, count, + RADEON_GPU_PAGE_SIZE, flags); + } +} + +/** * radeon_vm_bo_update_pte - map a bo into the vm page table * * @rdev: radeon_device pointer @@ -887,12 +1076,11 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, struct radeon_semaphore *sem = NULL; struct radeon_bo_va *bo_va; unsigned nptes, npdes, ndw; - uint64_t pe, addr; - uint64_t pfn; + uint64_t addr; int r; /* nothing to do if vm isn't bound */ - if (vm->sa_bo == NULL) + if (vm->page_directory == NULL) return 0; bo_va = radeon_vm_bo_find(vm, bo); @@ -939,25 +1127,29 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, } } - /* estimate number of dw needed */ - /* reserve space for 32-bit padding */ - ndw = 32; - nptes = radeon_bo_ngpu_pages(bo); - pfn = (bo_va->soffset / RADEON_GPU_PAGE_SIZE); + /* assume two extra pdes in case the mapping overlaps the borders */ + npdes = (nptes >> RADEON_VM_BLOCK_SIZE) + 2; + + /* estimate number of dw needed */ + /* semaphore, fence and padding */ + ndw = 32; - /* handle cases where a bo spans several pdes */ - npdes = (ALIGN(pfn + nptes, RADEON_VM_PTE_COUNT) - - (pfn & ~(RADEON_VM_PTE_COUNT - 1))) >> RADEON_VM_BLOCK_SIZE; + if (RADEON_VM_BLOCK_SIZE > 11) + /* reserve space for one header for every 2k dwords */ + ndw += (nptes >> 11) * 3; + else + /* reserve space for one header for + every (1 << BLOCK_SIZE) entries */ + ndw += (nptes >> RADEON_VM_BLOCK_SIZE) * 3; - /* reserve space for one header for every 2k dwords */ - ndw += (nptes >> 11) * 3; /* reserve space for pte addresses */ ndw += nptes * 2; /* reserve space for one header for every 2k dwords */ ndw += (npdes >> 11) * 3; + /* reserve space for pde addresses */ ndw += npdes * 2; @@ -971,22 +1163,14 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, radeon_fence_note_sync(vm->fence, ridx); } - /* update page table entries */ - pe = vm->pd_gpu_addr; - pe += radeon_vm_directory_size(rdev); - pe += (bo_va->soffset / RADEON_GPU_PAGE_SIZE) * 8; - - radeon_asic_vm_set_page(rdev, pe, addr, nptes, - RADEON_GPU_PAGE_SIZE, bo_va->flags); - - /* update page directory entries */ - addr = pe; - - pe = vm->pd_gpu_addr; - pe += ((bo_va->soffset / RADEON_GPU_PAGE_SIZE) >> RADEON_VM_BLOCK_SIZE) * 8; + r = radeon_vm_update_pdes(rdev, vm, bo_va->soffset, bo_va->eoffset); + if (r) { + radeon_ring_unlock_undo(rdev, ring); + return r; + } - radeon_asic_vm_set_page(rdev, pe, addr, npdes, - RADEON_VM_PTE_COUNT * 8, RADEON_VM_PAGE_VALID); + radeon_vm_update_ptes(rdev, vm, bo_va->soffset, bo_va->eoffset, + addr, bo_va->flags); radeon_fence_unref(&vm->fence); r = radeon_fence_emit(rdev, &vm->fence, ridx); @@ -997,6 +1181,7 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, radeon_ring_unlock_commit(rdev, ring); radeon_semaphore_free(rdev, &sem, vm->fence); radeon_fence_unref(&vm->last_flush); + return 0; } @@ -1068,7 +1253,6 @@ int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) vm->id = 0; vm->fence = NULL; - vm->last_pfn = 0; mutex_init(&vm->mutex); INIT_LIST_HEAD(&vm->list); INIT_LIST_HEAD(&vm->va); -- cgit v0.10.2 From d72d43cfc5847c176edabc72e6431ba691322c98 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 9 Oct 2012 13:31:18 +0200 Subject: drm/radeon: don't add the IB pool to all VMs v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We want to use VMs without the IB pool in the future. v2: also remove it from radeon_vm_finish. Signed-off-by: Christian König Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index bc6b56b..54cf9b5 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1848,7 +1848,7 @@ extern void radeon_ttm_set_active_vram_size(struct radeon_device *rdev, u64 size */ int radeon_vm_manager_init(struct radeon_device *rdev); void radeon_vm_manager_fini(struct radeon_device *rdev); -int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm); +void radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm); void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm); int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm); struct radeon_fence *radeon_vm_grab_id(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 98b170a..7e21ea3 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -602,7 +602,6 @@ int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm) * @vm: vm to bind * * Allocate a page table for the requested vm (cayman+). - * Also starts to populate the page table. * Returns 0 for success, error for failure. * * Global and local mutex must be locked! @@ -655,8 +654,7 @@ retry: } list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); - return radeon_vm_bo_update_pte(rdev, vm, rdev->ring_tmp_bo.bo, - &rdev->ring_tmp_bo.bo->tbo.mem); + return 0; } /** @@ -1241,30 +1239,15 @@ void radeon_vm_bo_invalidate(struct radeon_device *rdev, * @rdev: radeon_device pointer * @vm: requested vm * - * Init @vm (cayman+). - * Map the IB pool and any other shared objects into the VM - * by default as it's used by all VMs. - * Returns 0 for success, error for failure. + * Init @vm fields (cayman+). */ -int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) +void radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) { - struct radeon_bo_va *bo_va; - int r; - vm->id = 0; vm->fence = NULL; mutex_init(&vm->mutex); INIT_LIST_HEAD(&vm->list); INIT_LIST_HEAD(&vm->va); - - /* map the ib pool buffer at 0 in virtual address space, set - * read only - */ - bo_va = radeon_vm_bo_add(rdev, vm, rdev->ring_tmp_bo.bo); - r = radeon_vm_bo_set_addr(rdev, bo_va, RADEON_VA_IB_OFFSET, - RADEON_VM_PAGE_READABLE | - RADEON_VM_PAGE_SNOOPED); - return r; } /** @@ -1286,17 +1269,6 @@ void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm) radeon_vm_free_pt(rdev, vm); mutex_unlock(&rdev->vm_manager.lock); - /* remove all bo at this point non are busy any more because unbind - * waited for the last vm fence to signal - */ - r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); - if (!r) { - bo_va = radeon_vm_bo_find(vm, rdev->ring_tmp_bo.bo); - list_del_init(&bo_va->bo_list); - list_del_init(&bo_va->vm_list); - radeon_bo_unreserve(rdev->ring_tmp_bo.bo); - kfree(bo_va); - } if (!list_empty(&vm->va)) { dev_err(rdev->dev, "still active bo inside vm\n"); } diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 83b8d8a..dc781c4 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -419,6 +419,7 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) /* new gpu have virtual address space support */ if (rdev->family >= CHIP_CAYMAN) { struct radeon_fpriv *fpriv; + struct radeon_bo_va *bo_va; int r; fpriv = kzalloc(sizeof(*fpriv), GFP_KERNEL); @@ -426,7 +427,15 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) return -ENOMEM; } - r = radeon_vm_init(rdev, &fpriv->vm); + radeon_vm_init(rdev, &fpriv->vm); + + /* map the ib pool buffer read only into + * virtual address space */ + bo_va = radeon_vm_bo_add(rdev, &fpriv->vm, + rdev->ring_tmp_bo.bo); + r = radeon_vm_bo_set_addr(rdev, bo_va, RADEON_VA_IB_OFFSET, + RADEON_VM_PAGE_READABLE | + RADEON_VM_PAGE_SNOOPED); if (r) { radeon_vm_fini(rdev, &fpriv->vm); kfree(fpriv); @@ -454,6 +463,17 @@ void radeon_driver_postclose_kms(struct drm_device *dev, /* new gpu have virtual address space support */ if (rdev->family >= CHIP_CAYMAN && file_priv->driver_priv) { struct radeon_fpriv *fpriv = file_priv->driver_priv; + struct radeon_bo_va *bo_va; + int r; + + r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); + if (!r) { + bo_va = radeon_vm_bo_find(&fpriv->vm, + rdev->ring_tmp_bo.bo); + if (bo_va) + radeon_vm_bo_rmv(rdev, bo_va); + radeon_bo_unreserve(rdev->ring_tmp_bo.bo); + } radeon_vm_fini(rdev, &fpriv->vm); kfree(fpriv); -- cgit v0.10.2 From 13e55c38f8ba4bb15ff9b51e2c5e7801c0f29526 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 9 Oct 2012 13:31:19 +0200 Subject: drm/radeon: separate pt alloc from lru add MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make it possible to allocate a persistent page table. Signed-off-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 54cf9b5..8c42d54 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1851,6 +1851,7 @@ void radeon_vm_manager_fini(struct radeon_device *rdev); void radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm); void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm); int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm); +void radeon_vm_add_to_lru(struct radeon_device *rdev, struct radeon_vm *vm); struct radeon_fence *radeon_vm_grab_id(struct radeon_device *rdev, struct radeon_vm *vm, int ring); void radeon_vm_fence(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index cb7b7c0..41672cc 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -478,6 +478,7 @@ static int radeon_cs_ib_vm_chunk(struct radeon_device *rdev, } out: + radeon_vm_add_to_lru(rdev, vm); mutex_unlock(&vm->mutex); mutex_unlock(&rdev->vm_manager.lock); return r; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 7e21ea3..a7677dd 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -617,9 +617,6 @@ int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm) } if (vm->page_directory != NULL) { - /* update lru */ - list_del_init(&vm->list); - list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); return 0; } @@ -653,11 +650,26 @@ retry: return -ENOMEM; } - list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); return 0; } /** + * radeon_vm_add_to_lru - add VMs page table to LRU list + * + * @rdev: radeon_device pointer + * @vm: vm to add to LRU + * + * Add the allocated page table to the LRU list (cayman+). + * + * Global mutex must be locked! + */ +void radeon_vm_add_to_lru(struct radeon_device *rdev, struct radeon_vm *vm) +{ + list_del_init(&vm->list); + list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); +} + +/** * radeon_vm_grab_id - allocate the next free VMID * * @rdev: radeon_device pointer -- cgit v0.10.2 From c1a7ca0de38c23a15f652b1693afd56c9f07b16c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Oct 2012 12:15:13 -0400 Subject: drm/radeon/cayman: set VM max pfn at MC init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit No need to emit them at VM flush as we no longer use variable sized page tables now that we support 2 level page tables. This matches the behavior of SI (which does not support variable sized page tables). Signed-off-by: Alex Deucher Reviewed-by: Christian König diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index ab8d1f5..8c74c72 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -776,7 +776,7 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) */ for (i = 1; i < 8; i++) { WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (i << 2), 0); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), 0); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), rdev->vm_manager.max_pfn); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), rdev->gart.table_addr >> 12); } @@ -1576,12 +1576,6 @@ void cayman_vm_flush(struct radeon_device *rdev, int ridx, struct radeon_vm *vm) if (vm == NULL) return; - radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (vm->id << 2), 0)); - radeon_ring_write(ring, 0); - - radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (vm->id << 2), 0)); - radeon_ring_write(ring, rdev->vm_manager.max_pfn); - radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (vm->id << 2), 0)); radeon_ring_write(ring, vm->pd_gpu_addr >> 12); -- cgit v0.10.2 From 3691feea9826771d853d28d37b6b6e34758fa66d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Oct 2012 17:46:27 -0400 Subject: drm/radeon: check if pcie gen 2 is already enabled (v2) If so, skip enabling it to save time. v2: coding style fixes Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index a1f49c5..14313ad 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3431,9 +3431,14 @@ void evergreen_pcie_gen2_enable(struct radeon_device *rdev) if (!(mask & DRM_PCIE_SPEED_50)) return; + speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL); + if (speed_cntl & LC_CURRENT_DATA_RATE) { + DRM_INFO("PCIE gen 2 link speeds already enabled\n"); + return; + } + DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n"); - speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL); if ((speed_cntl & LC_OTHER_SIDE_EVER_SENT_GEN2) || (speed_cntl & LC_OTHER_SIDE_SUPPORTS_GEN2)) { diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 70c800f..cda280d 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3703,6 +3703,12 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) if (!(mask & DRM_PCIE_SPEED_50)) return; + speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL); + if (speed_cntl & LC_CURRENT_DATA_RATE) { + DRM_INFO("PCIE gen 2 link speeds already enabled\n"); + return; + } + DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n"); /* 55 nm r6xx asics */ -- cgit v0.10.2 From 082918471139b07964967cfe5f70230909c82ae1 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Mon, 15 Oct 2012 08:21:39 +0200 Subject: drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy(). radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[] to destroy each of them. radeon_ext_tmds_enc_destroy() however also has code to destroy it's associated I2C bus rec which has been obtained by radeon_i2c_lookup() and is therefore also in the i2c_bus[] list. This causes a double free resulting in a kernel panic when unloading the radeon driver. Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this problem. agd5f: fix compiler warning Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index fb15b62..a13ad9d 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -991,11 +991,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder, static void radeon_ext_tmds_enc_destroy(struct drm_encoder *encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_encoder_ext_tmds *tmds = radeon_encoder->enc_priv; - if (tmds) { - if (tmds->i2c_bus) - radeon_i2c_destroy(tmds->i2c_bus); - } + /* don't destroy the i2c bus record here, this will be done in radeon_i2c_fini */ kfree(radeon_encoder->enc_priv); drm_encoder_cleanup(encoder); kfree(radeon_encoder); -- cgit v0.10.2 From 8ad33cdf97639e2a1601b6dd8629d351c1c50198 Mon Sep 17 00:00:00 2001 From: Thomas Friebel Date: Mon, 15 Oct 2012 13:16:22 -0400 Subject: drm/radeon: fix spelling typos in debugging output Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index bba6690..47634f2 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -305,7 +305,7 @@ void radeon_ring_write(struct radeon_ring *ring, uint32_t v) { #if DRM_DEBUG_CODE if (ring->count_dw <= 0) { - DRM_ERROR("radeon: writting more dword to ring than expected !\n"); + DRM_ERROR("radeon: writing more dwords to the ring than expected!\n"); } #endif ring->ring[ring->wptr++] = v; -- cgit v0.10.2 From 4045f72bcf3c293c7c5932ef001742d8bb5ded76 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 2 Oct 2012 21:34:23 +0200 Subject: mac80211: check if key has TKIP type before updating IV This patch fix corruption which can manifest itself by following crash when switching on rfkill switch with rt2x00 driver: https://bugzilla.redhat.com/attachment.cgi?id=615362 Pointer key->u.ccmp.tfm of group key get corrupted in: ieee80211_rx_h_michael_mic_verify(): /* update IV in key information to be able to detect replays */ rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32; rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16; because rt2x00 always set RX_FLAG_MMIC_STRIPPED, even if key is not TKIP. We already check type of the key in different path in ieee80211_rx_h_michael_mic_verify() function, so adding additional check here is reasonable. Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index bdb53ab..e72562a 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -106,7 +106,8 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) if (status->flag & RX_FLAG_MMIC_ERROR) goto mic_fail; - if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key) + if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key && + rx->key->conf.cipher == WLAN_CIPHER_SUITE_TKIP) goto update_iv; return RX_CONTINUE; -- cgit v0.10.2 From e270b302e4771cde91e713ae17da31c1afc9a135 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 10 Oct 2012 11:13:06 -0700 Subject: brcmfmac: handle all exceptions as an error. in brcmf_usb_probe_cb only return code ENOLINK was seen as an error. This is wrong, all error codes should be returned to usb subsystem. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index a2b4b1e..7a6dfdc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1339,7 +1339,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo, } ret = brcmf_bus_start(dev); - if (ret == -ENOLINK) { + if (ret) { brcmf_dbg(ERROR, "dongle is not responding\n"); brcmf_detach(dev); goto fail; -- cgit v0.10.2 From a180b83bb1f036c587bdb93ac6171b94ff49133c Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 10 Oct 2012 11:13:09 -0700 Subject: brcmfmac: use control channel in roamed status reporting Channel reported in scan results passed to cfg80211 is control channel. But chanspec is reported while notifying cfg80211 about roamed update. Cfg80211 complains because it could not find the bss in the list. Report control channel while calling cfg80211_roamed. Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c1abaa6..48f08ae 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4606,12 +4606,13 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, struct brcmf_cfg80211_profile *profile = cfg->profile; struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); struct wiphy *wiphy = cfg_to_wiphy(cfg); - struct brcmf_channel_info_le channel_le; - struct ieee80211_channel *notify_channel; + struct ieee80211_channel *notify_channel = NULL; struct ieee80211_supported_band *band; + struct brcmf_bss_info_le *bi; u32 freq; s32 err = 0; u32 target_channel; + u8 *buf; WL_TRACE("Enter\n"); @@ -4619,11 +4620,22 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, memcpy(profile->bssid, e->addr, ETH_ALEN); brcmf_update_bss_info(cfg); - brcmf_exec_dcmd(ndev, BRCMF_C_GET_CHANNEL, &channel_le, - sizeof(channel_le)); + buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + goto done; + } + + /* data sent to dongle has to be little endian */ + *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); + err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_BSS_INFO, buf, WL_BSS_INFO_MAX); + + if (err) + goto done; - target_channel = le32_to_cpu(channel_le.target_channel); - WL_CONN("Roamed to channel %d\n", target_channel); + bi = (struct brcmf_bss_info_le *)(buf + 4); + target_channel = bi->ctl_ch ? bi->ctl_ch : + CHSPEC_CHANNEL(le16_to_cpu(bi->chanspec)); if (target_channel <= CH_MAX_2G_CHANNEL) band = wiphy->bands[IEEE80211_BAND_2GHZ]; @@ -4633,6 +4645,8 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, freq = ieee80211_channel_to_frequency(target_channel, band->band); notify_channel = ieee80211_get_channel(wiphy, freq); +done: + kfree(buf); cfg80211_roamed(ndev, notify_channel, (u8 *)profile->bssid, conn_info->req_ie, conn_info->req_ie_len, conn_info->resp_ie, conn_info->resp_ie_len, GFP_KERNEL); -- cgit v0.10.2 From 5dd161ff7b46029c9da4f4ef8b214b8ba4316445 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 10 Oct 2012 11:13:10 -0700 Subject: brcmfmac: set dongle mode accordingly when interface up The mode of WiFi dongle should be initialized in brcmf_cfg80211_up which get called when network interface is brought up. Otherwise brcmf_cfg80211_get_station would return error. Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 48f08ae..2c66bae 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -5200,41 +5200,6 @@ brcmf_cfg80211_event(struct net_device *ndev, schedule_work(&cfg->event_work); } -static s32 brcmf_dongle_mode(struct net_device *ndev, s32 iftype) -{ - s32 infra = 0; - s32 err = 0; - - switch (iftype) { - case NL80211_IFTYPE_MONITOR: - case NL80211_IFTYPE_WDS: - WL_ERR("type (%d) : currently we do not support this mode\n", - iftype); - err = -EINVAL; - return err; - case NL80211_IFTYPE_ADHOC: - infra = 0; - break; - case NL80211_IFTYPE_STATION: - infra = 1; - break; - case NL80211_IFTYPE_AP: - infra = 1; - break; - default: - err = -EINVAL; - WL_ERR("invalid type (%d)\n", iftype); - return err; - } - err = brcmf_exec_dcmd_u32(ndev, BRCMF_C_SET_INFRA, &infra); - if (err) { - WL_ERR("WLC_SET_INFRA error (%d)\n", err); - return err; - } - - return 0; -} - static s32 brcmf_dongle_eventmsg(struct net_device *ndev) { /* Room for "event_msgs" + '\0' + bitvec */ @@ -5453,7 +5418,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) WL_BEACON_TIMEOUT); if (err) goto default_conf_out; - err = brcmf_dongle_mode(ndev, wdev->iftype); + err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype, + NULL, NULL); if (err && err != -EINPROGRESS) goto default_conf_out; err = brcmf_dongle_probecap(cfg); -- cgit v0.10.2 From 3e4f319dacc60c1b4537b85329d393ad18bf7501 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 10 Oct 2012 11:13:12 -0700 Subject: brcmfmac: fix end of loop check (signedness bug) The problem here is that we loop until "remained_buf_len" is less than zero, but since it is unsigned, it never is. "remained_buf_len" has to be large enough to hold the value from "mgmt_ie_buf_len". That variable is type u32, but it only holds small values so I have changed to both variables to int. Also I removed the bogus initialization from "mgmt_ie_buf_len" so that GCC can detect if it is used unitialized. I moved the declaration of "remained_buf_len" closer to where it is used so it's easier to read. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Dan Carpenter Signed-off-by: Franky Lin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 2c66bae..411dfe7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3972,7 +3972,7 @@ brcmf_set_management_ie(struct brcmf_cfg80211_info *cfg, u8 *iovar_ie_buf; u8 *curr_ie_buf; u8 *mgmt_ie_buf = NULL; - u32 mgmt_ie_buf_len = 0; + int mgmt_ie_buf_len; u32 *mgmt_ie_len = 0; u32 del_add_ie_buf_len = 0; u32 total_ie_buf_len = 0; @@ -3982,7 +3982,7 @@ brcmf_set_management_ie(struct brcmf_cfg80211_info *cfg, struct parsed_vndr_ie_info *vndrie_info; s32 i; u8 *ptr; - u32 remained_buf_len; + int remained_buf_len; WL_TRACE("bssidx %d, pktflag : 0x%02X\n", bssidx, pktflag); iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL); -- cgit v0.10.2 From d4fa14cd62bd078c8e3ef39283b9f237e5b2ff0f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 10 Oct 2012 22:40:23 +0200 Subject: mac80211: use ieee80211_free_txskb in a few more places Free tx status skbs when draining power save buffers, pending frames, or when tearing down a vif. Fixes remaining conditions that can lead to hostapd/wpa_supplicant hangs when running out of socket write memory. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 6f8a73c..7de7717 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -853,7 +853,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (info->control.vif == &sdata->vif) { __skb_unlink(skb, &local->pending[i]); - dev_kfree_skb_irq(skb); + ieee80211_free_txskb(&local->hw, skb); } } } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 797dd36..0a4e4c0 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -650,7 +650,7 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, */ if (!skb) break; - dev_kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); } /* @@ -679,7 +679,7 @@ static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, local->total_ps_buffered--; ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n", sta->sta.addr); - dev_kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); } /* diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 22ca350..94e5868 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -406,7 +406,7 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local, int queue = info->hw_queue; if (WARN_ON(!info->control.vif)) { - kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); return; } @@ -431,7 +431,7 @@ void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (WARN_ON(!info->control.vif)) { - kfree_skb(skb); + ieee80211_free_txskb(&local->hw, skb); continue; } -- cgit v0.10.2 From 1fffa905adffbf0d3767fc978ef09afb830275eb Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 11 Oct 2012 14:05:15 +0200 Subject: bcma: fix unregistration of cores When cores are unregistered, entries need to be removed from cores list in a safe manner. Reported-by: Stanislaw Gruszka Reviewed-by: Arend Van Spriel Signed-off-by: Piotr Haber Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 432aeee..d865470 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -158,9 +158,10 @@ static int bcma_register_cores(struct bcma_bus *bus) static void bcma_unregister_cores(struct bcma_bus *bus) { - struct bcma_device *core; + struct bcma_device *core, *tmp; - list_for_each_entry(core, &bus->cores, list) { + list_for_each_entry_safe(core, tmp, &bus->cores, list) { + list_del(&core->list); if (core->dev_registered) device_unregister(&core->dev); } -- cgit v0.10.2 From bf11315eeda510ea4fc1a2bf972d8155d31d89b4 Mon Sep 17 00:00:00 2001 From: Stanislav Yakovlev Date: Mon, 15 Oct 2012 14:14:32 +0000 Subject: net/wireless: ipw2200: Fix panic occurring in ipw_handle_promiscuous_tx() The driver does not count space of radiotap fields when allocating skb for radiotap packet. This leads to kernel panic with the following call trace: ... [67607.676067] [] error_code+0x67/0x6c [67607.676067] [] ? skb_put+0x91/0xa0 [67607.676067] [] ? ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [] ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [] ipw_net_hard_start_xmit+0x8b/0x90 [ipw2200] [67607.676067] [] libipw_xmit+0x55a/0x980 [libipw] [67607.676067] [] dev_hard_start_xmit+0x218/0x4d0 ... This bug was found by VittGam. https://bugzilla.kernel.org/show_bug.cgi?id=43255 Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 935120f..768bf61 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -10472,7 +10472,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv, } else len = src->len; - dst = alloc_skb(len + sizeof(*rt_hdr), GFP_ATOMIC); + dst = alloc_skb(len + sizeof(*rt_hdr) + sizeof(u16)*2, GFP_ATOMIC); if (!dst) continue; -- cgit v0.10.2 From d79550a7bc35c16476ebdc27c78378d8093390ec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 11 Oct 2012 09:56:35 +0300 Subject: gpio-timberdale: fix a potential wrapping issue ->last_ier is an unsigned long but the high bits can't be used int the original code because the shift wraps. Cc: stable@kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c index 031c6ad..1a3e2b9 100644 --- a/drivers/gpio/gpio-timberdale.c +++ b/drivers/gpio/gpio-timberdale.c @@ -116,7 +116,7 @@ static void timbgpio_irq_disable(struct irq_data *d) unsigned long flags; spin_lock_irqsave(&tgpio->lock, flags); - tgpio->last_ier &= ~(1 << offset); + tgpio->last_ier &= ~(1UL << offset); iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); spin_unlock_irqrestore(&tgpio->lock, flags); } @@ -128,7 +128,7 @@ static void timbgpio_irq_enable(struct irq_data *d) unsigned long flags; spin_lock_irqsave(&tgpio->lock, flags); - tgpio->last_ier |= 1 << offset; + tgpio->last_ier |= 1UL << offset; iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); spin_unlock_irqrestore(&tgpio->lock, flags); } -- cgit v0.10.2 From 3ce9e53e788881da0d5f3912f80e0dd6b501f304 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 15 Oct 2012 21:16:56 +0200 Subject: kbuild: Fix accidental revert in commit fe04ddf Commit fe04ddf7c291 ("kbuild: Do not package /boot and /lib in make tar-pkg") accidentally reverted two previous kbuild commits. I don't know what I was thinking. This brings back changes made by commits 24cc7fb69a5b ("x86/kbuild: archscripts depends on scripts_basic") and c1c1a59e37da ("firmware: fix directory creation rule matching with make 3.80") Reported-by: Jan Beulich Cc: Signed-off-by: Michal Marek Signed-off-by: Linus Torvalds diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 58790bd..05afcca 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -142,7 +142,7 @@ KBUILD_CFLAGS += $(call cc-option,-mno-avx,) KBUILD_CFLAGS += $(mflags-y) KBUILD_AFLAGS += $(mflags-y) -archscripts: +archscripts: scripts_basic $(Q)$(MAKE) $(build)=arch/x86/tools relocs ### diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index c3f69ae..4d908d1 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -27,7 +27,7 @@ endif installed-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(mod-fw)) installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all)) -installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/. +installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/./ # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work. PHONY += $(INSTALL_FW_PATH)/$$(%) install-all-dirs @@ -42,7 +42,7 @@ quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) $(installed-fw-dirs): $(call cmd,mkdir) -$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $$(dir $(INSTALL_FW_PATH)/%) +$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %) $(call cmd,install) PHONY += __fw_install __fw_modinst FORCE -- cgit v0.10.2 From 3e5bde8ef4cc9e719b492726dd82a43d29468cd0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 15 Oct 2012 22:13:12 +0200 Subject: serial/8250_hp300: Missing 8250 register interface conversion bits MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 2655a2c76f80d91da34faa8f4e114d1793435ed3 ("8250: use the 8250 register interface not the legacy one") forgot to fully switch one instance of struct uart_port to struct uart_8250_port, causing the following compile failure: drivers/tty/serial/8250/8250_hp300.c: In function ‘hpdca_init_one’: drivers/tty/serial/8250/8250_hp300.c:174: error: ‘uart’ undeclared (first use in this function) drivers/tty/serial/8250/8250_hp300.c:174: error: (Each undeclared identifier is reported only once drivers/tty/serial/8250/8250_hp300.c:174: error: for each function it appears in.) This went unnoticed in -next, as CONFIG_HPDCA is not set to y by allmodconfig. Reported-by: Fengguang Wu Cc: Alan Cox Cc: Philip Blundell Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c index 8f1dd2c..f3d0edf 100644 --- a/drivers/tty/serial/8250/8250_hp300.c +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -162,7 +162,7 @@ int __init hp300_setup_serial_console(void) static int __devinit hpdca_init_one(struct dio_dev *d, const struct dio_device_id *ent) { - struct uart_port port; + struct uart_8250_port uart; int line; #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -174,19 +174,19 @@ static int __devinit hpdca_init_one(struct dio_dev *d, memset(&uart, 0, sizeof(uart)); /* Memory mapped I/O */ - port.iotype = UPIO_MEM; - port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; - port.irq = d->ipl; - port.uartclk = HPDCA_BAUD_BASE * 16; - port.mapbase = (d->resource.start + UART_OFFSET); - port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); - port.regshift = 1; - port.dev = &d->dev; + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + uart.port.irq = d->ipl; + uart.port.uartclk = HPDCA_BAUD_BASE * 16; + uart.port.mapbase = (d->resource.start + UART_OFFSET); + uart.port.membase = (char *)(uart.port.mapbase + DIO_VIRADDRBASE); + uart.port.regshift = 1; + uart.port.dev = &d->dev; line = serial8250_register_8250_port(&uart); if (line < 0) { printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" - " irq %d failed\n", d->scode, port.irq); + " irq %d failed\n", d->scode, uart.port.irq); return -ENOMEM; } -- cgit v0.10.2 From dd8e8c4a2c902d8350b702e7bc7c2799e5e7e331 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 15 Oct 2012 13:40:15 -0700 Subject: thermal, cpufreq: Fix build when CPU_FREQ_TABLE isn't configured Commit 023614183768 ("thermal: add generic cpufreq cooling implementation") requires cpufreq_frequency_get_table(), but that function is only defined for CONFIG_CPU_FREQ_TABLE resulting in the following build error: drivers/built-in.o: In function `cpufreq_get_max_state': drivers/thermal/cpu_cooling.c:259: undefined reference to `cpufreq_frequency_get_table' drivers/built-in.o: In function `get_cpu_frequency': drivers/thermal/cpu_cooling.c:129: undefined reference to `cpufreq_frequency_get_table' Fix it by selecting CONFIG_CPU_FREQ_TABLE for such a configuration. It turns out CONFIG_EXYNOS_THERMAL also needs CONFIG_CPU_FREQ_TABLE, so select it there as well. Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index edfd67d..e1cb6bd 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -22,6 +22,7 @@ config THERMAL_HWMON config CPU_THERMAL bool "generic cpu cooling support" depends on THERMAL && CPU_FREQ + select CPU_FREQ_TABLE help This implements the generic cpu cooling mechanism through frequency reduction, cpu hotplug and any other ways of reducing temperature. An @@ -50,6 +51,7 @@ config RCAR_THERMAL config EXYNOS_THERMAL tristate "Temperature sensor on Samsung EXYNOS" depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL + select CPU_FREQ_TABLE help If you say yes here you get support for TMU (Thermal Managment Unit) on SAMSUNG EXYNOS series of SoC. -- cgit v0.10.2 From 92f79db1af9ff8d525dc24fa43116bd2c70ef45b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 14 Oct 2012 12:11:55 +0200 Subject: m68k: Remove empty #ifdef/#else/#endif block Leftover from commit 10b3a979347d4aba7de19e8d33eb8b87fe2a11dd ("UAPI: (Scripted) Disintegrate arch/m68k/include/asm") Signed-off-by: Geert Uytterhoeven diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h index 0f78ccd..0f71704 100644 --- a/arch/m68k/include/asm/ptrace.h +++ b/arch/m68k/include/asm/ptrace.h @@ -4,9 +4,6 @@ #include #ifndef __ASSEMBLY__ -#ifdef CONFIG_COLDFIRE -#else -#endif #ifndef PS_S #define PS_S (0x2000) -- cgit v0.10.2 From 11f93576b0b50bf391ffafa544b85e541f5e59a5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 15 Oct 2012 01:10:28 -0700 Subject: ARM: shmobile: r8a7779: use __iomem pointers for MMIO 0a4b04dc299dfb691827a4001b3d8d7e443b71c9 (ARM: shmobile: use __iomem pointers for MMIO) modified iomem pointers so that IOMEM() macro will be used, but clock-r8a7779.c was out of target. This patch fixes it up. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 3cafb6a..37b2a31 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -24,17 +24,17 @@ #include #include -#define FRQMR 0xffc80014 -#define MSTPCR0 0xffc80030 -#define MSTPCR1 0xffc80034 -#define MSTPCR3 0xffc8003c -#define MSTPSR1 0xffc80044 -#define MSTPSR4 0xffc80048 -#define MSTPSR6 0xffc8004c -#define MSTPCR4 0xffc80050 -#define MSTPCR5 0xffc80054 -#define MSTPCR6 0xffc80058 -#define MSTPCR7 0xffc80040 +#define FRQMR IOMEM(0xffc80014) +#define MSTPCR0 IOMEM(0xffc80030) +#define MSTPCR1 IOMEM(0xffc80034) +#define MSTPCR3 IOMEM(0xffc8003c) +#define MSTPSR1 IOMEM(0xffc80044) +#define MSTPSR4 IOMEM(0xffc80048) +#define MSTPSR6 IOMEM(0xffc8004c) +#define MSTPCR4 IOMEM(0xffc80050) +#define MSTPCR5 IOMEM(0xffc80054) +#define MSTPCR6 IOMEM(0xffc80058) +#define MSTPCR7 IOMEM(0xffc80040) /* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. -- cgit v0.10.2 From bd6126bd0766cb0e03a4d832cc3611dff5ea8e50 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 16 Oct 2012 10:15:45 +1000 Subject: drm: radeon: fix printk format warning drivers/gpu/drm/radeon/radeon_atpx_handler.c:151:3: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t' [airlied: Alex had others fixed already, except for atpx one] Signed-off-by: Randy Dunlap Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 582e994..1aa3f91 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -148,7 +148,7 @@ static int radeon_atpx_verify_interface(struct radeon_atpx *atpx) size = *(u16 *) info->buffer.pointer; if (size < 8) { - printk("ATPX buffer is too small: %lu\n", size); + printk("ATPX buffer is too small: %zu\n", size); err = -EINVAL; goto out; } -- cgit v0.10.2 From 7b8505300525d7e802ecf52ae160bc63f4ba28d7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 16 Oct 2012 10:28:21 +1000 Subject: drm: fix warning on 32-bit. This cast was causing a warning on 32-bit builds. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_info.c b/drivers/gpu/drm/drm_info.c index cdf8b1e..441ebc1 100644 --- a/drivers/gpu/drm/drm_info.c +++ b/drivers/gpu/drm/drm_info.c @@ -239,7 +239,7 @@ int drm_vma_info(struct seq_file *m, void *data) mutex_lock(&dev->struct_mutex); seq_printf(m, "vma use count: %d, high_memory = %pK, 0x%pK\n", atomic_read(&dev->vma_count), - high_memory, (void *)virt_to_phys(high_memory)); + high_memory, (void *)(unsigned long)virt_to_phys(high_memory)); list_for_each_entry(pt, &dev->vmalist, head) { vma = pt->vma; -- cgit v0.10.2 From 17bfcd3adc2c2002c1fdf990640bc36aec6a90b3 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 12 Oct 2012 22:22:59 +0200 Subject: ARM: dts: compile Integrator device trees This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c1ce813..f37cf9f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ + integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ -- cgit v0.10.2 From 5448a279ebf2a8e4cc7289ff1ef382b3e71b8ea6 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 13 Oct 2012 17:18:02 +1300 Subject: dtb: fix interrupt assignment for ehci/uhci on wm8505 EHCI and UHCI devices in wm8505.dtsi should use IRQ 1 & 0 respectively - not 43 as used on newer models. Signed-off-by: Tony Prisk Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index b459691..330f833 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -71,13 +71,13 @@ ehci@d8007100 { compatible = "via,vt8500-ehci"; reg = <0xd8007100 0x200>; - interrupts = <43>; + interrupts = <1>; }; uhci@d8007300 { compatible = "platform-uhci"; reg = <0xd8007300 0x200>; - interrupts = <43>; + interrupts = <0>; }; fb@d8050800 { -- cgit v0.10.2 From 50c08f8e9f44bc7b20e06c06d1180f3b914e5a83 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:32 +0400 Subject: xtensa: ISS: fix specific simcalls Simcalls that take memory buffer definitely need wmb or rmb to make sure gcc doesn't optimize away code that fills the buffer. Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h index 8c43bfea..bd78192 100644 --- a/arch/xtensa/platforms/iss/include/platform/simcall.h +++ b/arch/xtensa/platforms/iss/include/platform/simcall.h @@ -78,8 +78,9 @@ static inline int __simc(int a, int b, int c, int d, int e, int f) return ret; } -static inline int simc_open(char *file, int flags, int mode) +static inline int simc_open(const char *file, int flags, int mode) { + wmb(); return __simc(SYS_open, (int) file, flags, mode, 0, 0); } @@ -90,16 +91,19 @@ static inline int simc_close(int fd) static inline int simc_ioctl(int fd, int request, void *arg) { + wmb(); return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0); } static inline int simc_read(int fd, void *buf, size_t count) { + rmb(); return __simc(SYS_read, fd, (int) buf, count, 0, 0); } -static inline int simc_write(int fd, void *buf, size_t count) +static inline int simc_write(int fd, const void *buf, size_t count) { + wmb(); return __simc(SYS_write, fd, (int) buf, count, 0, 0); } @@ -107,6 +111,7 @@ static inline int simc_poll(int fd) { struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; + wmb(); return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv, 0, 0); } -- cgit v0.10.2 From c88d8df0cc69fe0238f2c805a87cc67fb27a43fe Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:33 +0400 Subject: xtensa: ISS: fix rs_put_char ISS serial console prints garbage instead of symbols printed via rs_put_char. gcc optimizes away putting prined symbol into memory buffer because there's no evidence that the buffer is used afterwards. Make rs_put_char and rs_write use simc_write that has explicit wmb. Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 8ab47ed..7e74895 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -91,7 +91,7 @@ static int rs_write(struct tty_struct * tty, { /* see drivers/char/serialX.c to reference original version */ - __simc (SYS_write, 1, (unsigned long)buf, count, 0, 0); + simc_write(1, buf, count); return count; } @@ -122,12 +122,7 @@ static void rs_poll(unsigned long priv) static int rs_put_char(struct tty_struct *tty, unsigned char ch) { - char buf[2]; - - buf[0] = ch; - buf[1] = '\0'; /* Is this NULL necessary? */ - __simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0); - return 1; + return rs_write(tty, &ch, 1); } static void rs_flush_chars(struct tty_struct *tty) -- cgit v0.10.2 From eae8a416afe140df4b054c448476654db0d46bde Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Mon, 15 Oct 2012 21:41:19 -0700 Subject: xtensa: fix memmove(), bcopy(), and memcpy(). - fix memmove to correctly handle overlapping src and dst; - fix memcpy loop ending conditions from signed '<=' to '!='; - modify bcopy to call memmove; Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/lib/memcopy.S b/arch/xtensa/lib/memcopy.S index ea59dcd..c48b80a 100644 --- a/arch/xtensa/lib/memcopy.S +++ b/arch/xtensa/lib/memcopy.S @@ -6,7 +6,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2002 - 2005 Tensilica Inc. + * Copyright (C) 2002 - 2012 Tensilica Inc. */ #include @@ -27,14 +27,11 @@ #endif .endm - /* * void *memcpy(void *dst, const void *src, size_t len); - * void *memmove(void *dst, const void *src, size_t len); - * void *bcopy(const void *src, void *dst, size_t len); * * This function is intended to do the same thing as the standard - * library function memcpy() (or bcopy()) for most cases. + * library function memcpy() for most cases. * However, where the source and/or destination references * an instruction RAM or ROM or a data RAM or ROM, that * source and/or destination will always be accessed with @@ -45,9 +42,6 @@ * !!!!!!! Handling of IRAM/IROM has not yet * !!!!!!! been implemented. * - * The bcopy version is provided here to avoid the overhead - * of an extra call, for callers that require this convention. - * * The (general case) algorithm is as follows: * If destination is unaligned, align it by conditionally * copying 1 and 2 bytes. @@ -76,17 +70,6 @@ */ .text - .align 4 - .global bcopy - .type bcopy,@function -bcopy: - entry sp, 16 # minimal stack frame - # a2=src, a3=dst, a4=len - mov a5, a3 # copy dst so that a2 is return value - mov a3, a2 - mov a2, a5 - j .Lcommon # go to common code for memcpy+bcopy - /* * Byte by byte copy @@ -107,7 +90,7 @@ bcopy: s8i a6, a5, 0 addi a5, a5, 1 #if !XCHAL_HAVE_LOOPS - blt a3, a7, .Lnextbyte + bne a3, a7, .Lnextbyte # continue loop if $a3:src != $a7:src_end #endif /* !XCHAL_HAVE_LOOPS */ .Lbytecopydone: retw @@ -144,9 +127,6 @@ bcopy: .global memcpy .type memcpy,@function memcpy: - .global memmove - .type memmove,@function -memmove: entry sp, 16 # minimal stack frame # a2/ dst, a3/ src, a4/ len @@ -182,7 +162,7 @@ memmove: s32i a7, a5, 12 addi a5, a5, 16 #if !XCHAL_HAVE_LOOPS - blt a3, a8, .Loop1 + bne a3, a8, .Loop1 # continue loop if a3:src != a8:src_end #endif /* !XCHAL_HAVE_LOOPS */ .Loop1done: bbci.l a4, 3, .L2 @@ -260,7 +240,7 @@ memmove: s32i a9, a5, 12 addi a5, a5, 16 #if !XCHAL_HAVE_LOOPS - blt a3, a10, .Loop2 + bne a3, a10, .Loop2 # continue loop if a3:src != a10:src_end #endif /* !XCHAL_HAVE_LOOPS */ .Loop2done: bbci.l a4, 3, .L12 @@ -305,6 +285,285 @@ memmove: l8ui a6, a3, 0 s8i a6, a5, 0 retw + + +/* + * void bcopy(const void *src, void *dest, size_t n); + */ + .align 4 + .global bcopy + .type bcopy,@function +bcopy: + entry sp, 16 # minimal stack frame + # a2=src, a3=dst, a4=len + mov a5, a3 + mov a3, a2 + mov a2, a5 + j .Lmovecommon # go to common code for memmove+bcopy + +/* + * void *memmove(void *dst, const void *src, size_t len); + * + * This function is intended to do the same thing as the standard + * library function memmove() for most cases. + * However, where the source and/or destination references + * an instruction RAM or ROM or a data RAM or ROM, that + * source and/or destination will always be accessed with + * 32-bit load and store instructions (as required for these + * types of devices). + * + * !!!!!!! XTFIXME: + * !!!!!!! Handling of IRAM/IROM has not yet + * !!!!!!! been implemented. + * + * The (general case) algorithm is as follows: + * If end of source doesn't overlap destination then use memcpy. + * Otherwise do memcpy backwards. + * + * Register use: + * a0/ return address + * a1/ stack pointer + * a2/ return value + * a3/ src + * a4/ length + * a5/ dst + * a6/ tmp + * a7/ tmp + * a8/ tmp + * a9/ tmp + * a10/ tmp + * a11/ tmp + */ + +/* + * Byte by byte copy + */ + .align 4 + .byte 0 # 1 mod 4 alignment for LOOPNEZ + # (0 mod 4 alignment for LBEG) +.Lbackbytecopy: +#if XCHAL_HAVE_LOOPS + loopnez a4, .Lbackbytecopydone +#else /* !XCHAL_HAVE_LOOPS */ + beqz a4, .Lbackbytecopydone + sub a7, a3, a4 # a7 = start address for source +#endif /* !XCHAL_HAVE_LOOPS */ +.Lbacknextbyte: + addi a3, a3, -1 + l8ui a6, a3, 0 + addi a5, a5, -1 + s8i a6, a5, 0 +#if !XCHAL_HAVE_LOOPS + bne a3, a7, .Lbacknextbyte # continue loop if + # $a3:src != $a7:src_start +#endif /* !XCHAL_HAVE_LOOPS */ +.Lbackbytecopydone: + retw + +/* + * Destination is unaligned + */ + + .align 4 +.Lbackdst1mod2: # dst is only byte aligned + _bltui a4, 7, .Lbackbytecopy # do short copies byte by byte + + # copy 1 byte + addi a3, a3, -1 + l8ui a6, a3, 0 + addi a5, a5, -1 + s8i a6, a5, 0 + addi a4, a4, -1 + _bbci.l a5, 1, .Lbackdstaligned # if dst is now aligned, then + # return to main algorithm +.Lbackdst2mod4: # dst 16-bit aligned + # copy 2 bytes + _bltui a4, 6, .Lbackbytecopy # do short copies byte by byte + addi a3, a3, -2 + l8ui a6, a3, 0 + l8ui a7, a3, 1 + addi a5, a5, -2 + s8i a6, a5, 0 + s8i a7, a5, 1 + addi a4, a4, -2 + j .Lbackdstaligned # dst is now aligned, + # return to main algorithm + + .align 4 + .global memmove + .type memmove,@function +memmove: + + entry sp, 16 # minimal stack frame + # a2/ dst, a3/ src, a4/ len + mov a5, a2 # copy dst so that a2 is return value +.Lmovecommon: + sub a6, a5, a3 + bgeu a6, a4, .Lcommon + + add a5, a5, a4 + add a3, a3, a4 + + _bbsi.l a5, 0, .Lbackdst1mod2 # if dst is 1 mod 2 + _bbsi.l a5, 1, .Lbackdst2mod4 # if dst is 2 mod 4 +.Lbackdstaligned: # return here from .Lbackdst?mod? once dst is aligned + srli a7, a4, 4 # number of loop iterations with 16B + # per iteration + movi a8, 3 # if source is not aligned, + _bany a3, a8, .Lbacksrcunaligned # then use shifting copy + /* + * Destination and source are word-aligned, use word copy. + */ + # copy 16 bytes per iteration for word-aligned dst and word-aligned src +#if XCHAL_HAVE_LOOPS + loopnez a7, .backLoop1done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .backLoop1done + slli a8, a7, 4 + sub a8, a3, a8 # a8 = start of first 16B source chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.backLoop1: + addi a3, a3, -16 + l32i a7, a3, 12 + l32i a6, a3, 8 + addi a5, a5, -16 + s32i a7, a5, 12 + l32i a7, a3, 4 + s32i a6, a5, 8 + l32i a6, a3, 0 + s32i a7, a5, 4 + s32i a6, a5, 0 +#if !XCHAL_HAVE_LOOPS + bne a3, a8, .backLoop1 # continue loop if a3:src != a8:src_start +#endif /* !XCHAL_HAVE_LOOPS */ +.backLoop1done: + bbci.l a4, 3, .Lback2 + # copy 8 bytes + addi a3, a3, -8 + l32i a6, a3, 0 + l32i a7, a3, 4 + addi a5, a5, -8 + s32i a6, a5, 0 + s32i a7, a5, 4 +.Lback2: + bbsi.l a4, 2, .Lback3 + bbsi.l a4, 1, .Lback4 + bbsi.l a4, 0, .Lback5 + retw +.Lback3: + # copy 4 bytes + addi a3, a3, -4 + l32i a6, a3, 0 + addi a5, a5, -4 + s32i a6, a5, 0 + bbsi.l a4, 1, .Lback4 + bbsi.l a4, 0, .Lback5 + retw +.Lback4: + # copy 2 bytes + addi a3, a3, -2 + l16ui a6, a3, 0 + addi a5, a5, -2 + s16i a6, a5, 0 + bbsi.l a4, 0, .Lback5 + retw +.Lback5: + # copy 1 byte + addi a3, a3, -1 + l8ui a6, a3, 0 + addi a5, a5, -1 + s8i a6, a5, 0 + retw + +/* + * Destination is aligned, Source is unaligned + */ + + .align 4 +.Lbacksrcunaligned: + _beqz a4, .Lbackdone # avoid loading anything for zero-length copies + # copy 16 bytes per iteration for word-aligned dst and unaligned src + ssa8 a3 # set shift amount from byte offset +#define SIM_CHECKS_ALIGNMENT 1 /* set to 1 when running on ISS with + * the lint or ferret client, or 0 + * to save a few cycles */ +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT + and a11, a3, a8 # save unalignment offset for below + sub a3, a3, a11 # align a3 +#endif + l32i a6, a3, 0 # load first word +#if XCHAL_HAVE_LOOPS + loopnez a7, .backLoop2done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .backLoop2done + slli a10, a7, 4 + sub a10, a3, a10 # a10 = start of first 16B source chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.backLoop2: + addi a3, a3, -16 + l32i a7, a3, 12 + l32i a8, a3, 8 + addi a5, a5, -16 + src_b a6, a7, a6 + s32i a6, a5, 12 + l32i a9, a3, 4 + src_b a7, a8, a7 + s32i a7, a5, 8 + l32i a6, a3, 0 + src_b a8, a9, a8 + s32i a8, a5, 4 + src_b a9, a6, a9 + s32i a9, a5, 0 +#if !XCHAL_HAVE_LOOPS + bne a3, a10, .backLoop2 # continue loop if a3:src != a10:src_start +#endif /* !XCHAL_HAVE_LOOPS */ +.backLoop2done: + bbci.l a4, 3, .Lback12 + # copy 8 bytes + addi a3, a3, -8 + l32i a7, a3, 4 + l32i a8, a3, 0 + addi a5, a5, -8 + src_b a6, a7, a6 + s32i a6, a5, 4 + src_b a7, a8, a7 + s32i a7, a5, 0 + mov a6, a8 +.Lback12: + bbci.l a4, 2, .Lback13 + # copy 4 bytes + addi a3, a3, -4 + l32i a7, a3, 0 + addi a5, a5, -4 + src_b a6, a7, a6 + s32i a6, a5, 0 + mov a6, a7 +.Lback13: +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT + add a3, a3, a11 # readjust a3 with correct misalignment +#endif + bbsi.l a4, 1, .Lback14 + bbsi.l a4, 0, .Lback15 +.Lbackdone: + retw +.Lback14: + # copy 2 bytes + addi a3, a3, -2 + l8ui a6, a3, 0 + l8ui a7, a3, 1 + addi a5, a5, -2 + s8i a6, a5, 0 + s8i a7, a5, 1 + bbsi.l a4, 0, .Lback15 + retw +.Lback15: + # copy 1 byte + addi a3, a3, -1 + addi a5, a5, -1 + l8ui a6, a3, 0 + s8i a6, a5, 0 + retw + /* * Local Variables: -- cgit v0.10.2 From 84ed30538b5d9a29a9612b93dd0a45d561624f82 Mon Sep 17 00:00:00 2001 From: Marc Gauthier Date: Mon, 15 Oct 2012 03:55:35 +0400 Subject: xtensa: copy_thread with CLONE_VM must not copy live parent AR windows When doing a fork (new VM), the new task has a mirror image of the parent's stack, so keeps the same live register windows etc. However when doing a clone with CLONE_VM, keeping the same VM (eg. when creating a new thread), the child starts afresh on a new stack -- it cannot share any part of the parent stack. It especially cannot have the same live AR windows as the parent, otherwise it will overwrite the parent stack on overflow, likely causing corruption. (and so it did...) Effectively, the register windows need to be spilled. Turns out it's much easier to simply not copy parent register windows when CLONE_VM is set. Signed-off-by: Marc Gauthier Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index bc02082..7901ee7 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -173,6 +173,16 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) * * Note: This is a pristine frame, so we don't need any spill region on top of * childregs. + * + * The fun part: if we're keeping the same VM (i.e. cloning a thread, + * not an entire process), we're normally given a new usp, and we CANNOT share + * any live address register windows. If we just copy those live frames over, + * the two threads (parent and child) will overflow the same frames onto the + * parent stack at different times, likely corrupting the parent stack (esp. + * if the parent returns from functions that called clone() and calls new + * ones, before the child overflows its now old copies of its parent windows). + * One solution is to spill windows to the parent stack, but that's fairly + * involved. Much simpler to just not copy those live frames across. */ int copy_thread(unsigned long clone_flags, unsigned long usp, @@ -191,13 +201,14 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, else childregs = (struct pt_regs*)tos - 1; + /* This does not copy all the regs. In a bout of brilliance or madness, + ARs beyond a0-a15 exist past the end of the struct. */ *childregs = *regs; /* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */ *((int*)childregs - 3) = (unsigned long)childregs; *((int*)childregs - 4) = 0; - childregs->areg[1] = tos; childregs->areg[2] = 0; p->set_child_tid = p->clear_child_tid = NULL; p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1); @@ -205,10 +216,14 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, if (user_mode(regs)) { - int len = childregs->wmask & ~0xf; childregs->areg[1] = usp; - memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], - ®s->areg[XCHAL_NUM_AREGS - len/4], len); + if (clone_flags & CLONE_VM) { + childregs->wmask = 1; /* can't share live windows */ + } else { + int len = childregs->wmask & ~0xf; + memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], + ®s->areg[XCHAL_NUM_AREGS - len/4], len); + } // FIXME: we need to set THREADPTR in thread_info... if (clone_flags & CLONE_SETTLS) childregs->areg[2] = childregs->areg[6]; @@ -216,6 +231,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, } else { /* In kernel space, we start a new thread with a new stack. */ childregs->wmask = 1; + childregs->areg[1] = tos; } #if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) -- cgit v0.10.2 From 1bbedc3a7bf2a72b9b58ce1d171811db757b1940 Mon Sep 17 00:00:00 2001 From: Marc Gauthier Date: Mon, 15 Oct 2012 03:55:36 +0400 Subject: xtensa: fix missing return in do_page_fault for SIGBUS case Signed-off-by: Marc Gauthier Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index 2c2f710..245b08f 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -6,7 +6,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2010 Tensilica Inc. * * Chris Zankel * Joe Taylor @@ -186,6 +186,7 @@ do_sigbus: /* Kernel mode? Handle exceptions or die */ if (!user_mode(regs)) bad_page_fault(regs, address, SIGBUS); + return; vmalloc_fault: { -- cgit v0.10.2 From f4349b6e01c8927a04795885702a173b6a60573c Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:37 +0400 Subject: xtensa: fix boot parameters parsing Boot parameter tags with handlers are ignored like this: [ 0.000000] Ignoring tag 0x00001003 [ 0.000000] Ignoring tag 0x00001001 [ 0.000000] Ignoring tag 0x00001004 because neither tagtable entries nor tag handlers appear in the vmlinux. Fix tagtable definition attributes so that tag entries are not dropped. Fix end of memory bank calculation in parse_tag_mem: it is intended to round down to page size, but instead did something strange leading to hang right after boot. Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 270360d..b237988 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -100,7 +100,7 @@ typedef struct tagtable { } tagtable_t; #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn \ - __attribute__((unused, __section__(".taglist"))) = { tag, fn } + __attribute__((used, section(".taglist"))) = { tag, fn } /* parse current tag */ @@ -120,7 +120,7 @@ static int __init parse_tag_mem(const bp_tag_t *tag) } sysmem.bank[sysmem.nr_banks].type = mi->type; sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(mi->start); - sysmem.bank[sysmem.nr_banks].end = mi->end & PAGE_SIZE; + sysmem.bank[sysmem.nr_banks].end = mi->end & PAGE_MASK; sysmem.nr_banks++; return 0; -- cgit v0.10.2 From bc5378fcba974317f9657c4fdc78af227e1e1068 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:38 +0400 Subject: xtensa: reorganize SR referencing - reference SRs by names where possible, not by numbers; - get rid of __stringify around SR names where possible; - remove unneeded SR names from asm/regs.h; - add SREG_ prefix to remaining SR names; Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/boot/boot-redboot/bootstrap.S b/arch/xtensa/boot/boot-redboot/bootstrap.S index 4c316cd..86c34db 100644 --- a/arch/xtensa/boot/boot-redboot/bootstrap.S +++ b/arch/xtensa/boot/boot-redboot/bootstrap.S @@ -51,17 +51,17 @@ _start: /* 'reset' window registers */ movi a4, 1 - wsr a4, PS + wsr a4, ps rsync - rsr a5, WINDOWBASE + rsr a5, windowbase ssl a5 sll a4, a4 - wsr a4, WINDOWSTART + wsr a4, windowstart rsync movi a4, 0x00040000 - wsr a4, PS + wsr a4, ps rsync /* copy the loader to its address diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h index b409893..24f50ca 100644 --- a/arch/xtensa/include/asm/atomic.h +++ b/arch/xtensa/include/asm/atomic.h @@ -73,7 +73,7 @@ static inline void atomic_add(int i, atomic_t * v) "l32i %0, %2, 0 \n\t" "add %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (i), "a" (v) @@ -97,7 +97,7 @@ static inline void atomic_sub(int i, atomic_t *v) "l32i %0, %2, 0 \n\t" "sub %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (i), "a" (v) @@ -118,7 +118,7 @@ static inline int atomic_add_return(int i, atomic_t * v) "l32i %0, %2, 0 \n\t" "add %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (i), "a" (v) @@ -137,7 +137,7 @@ static inline int atomic_sub_return(int i, atomic_t * v) "l32i %0, %2, 0 \n\t" "sub %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (i), "a" (v) @@ -260,7 +260,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) "xor %1, %4, %3 \n\t" "and %0, %0, %4 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval), "=a" (mask) : "a" (v), "a" (all_f), "1" (mask) @@ -277,7 +277,7 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) "l32i %0, %2, 0 \n\t" "or %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (mask), "a" (v) diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 376cd9d..569fec4 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -165,7 +165,7 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*, static inline u32 xtensa_get_cacheattr(void) { u32 r; - asm volatile(" rsr %0, CACHEATTR" : "=a"(r)); + asm volatile(" rsr %0, cacheattr" : "=a"(r)); return r; } diff --git a/arch/xtensa/include/asm/cmpxchg.h b/arch/xtensa/include/asm/cmpxchg.h index e321490..64dad04 100644 --- a/arch/xtensa/include/asm/cmpxchg.h +++ b/arch/xtensa/include/asm/cmpxchg.h @@ -27,7 +27,7 @@ __cmpxchg_u32(volatile int *p, int old, int new) "bne %0, %2, 1f \n\t" "s32i %3, %1, 0 \n\t" "1: \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n\t" : "=&a" (old) : "a" (p), "a" (old), "r" (new) @@ -97,7 +97,7 @@ static inline unsigned long xchg_u32(volatile int * m, unsigned long val) __asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t" "l32i %0, %1, 0 \n\t" "s32i %2, %1, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n\t" : "=&a" (tmp) : "a" (m), "a" (val) diff --git a/arch/xtensa/include/asm/coprocessor.h b/arch/xtensa/include/asm/coprocessor.h index 75c94a1..677501b 100644 --- a/arch/xtensa/include/asm/coprocessor.h +++ b/arch/xtensa/include/asm/coprocessor.h @@ -94,11 +94,10 @@ #if XCHAL_HAVE_CP #define RSR_CPENABLE(x) do { \ - __asm__ __volatile__("rsr %0," __stringify(CPENABLE) : "=a" (x)); \ + __asm__ __volatile__("rsr %0, cpenable" : "=a" (x)); \ } while(0); #define WSR_CPENABLE(x) do { \ - __asm__ __volatile__("wsr %0," __stringify(CPENABLE) "; rsync" \ - :: "a" (x)); \ + __asm__ __volatile__("wsr %0, cpenable; rsync" :: "a" (x)); \ } while(0); #endif /* XCHAL_HAVE_CP */ diff --git a/arch/xtensa/include/asm/delay.h b/arch/xtensa/include/asm/delay.h index e1d8c9e..58c0a4f 100644 --- a/arch/xtensa/include/asm/delay.h +++ b/arch/xtensa/include/asm/delay.h @@ -27,7 +27,7 @@ static inline void __delay(unsigned long loops) static __inline__ u32 xtensa_get_ccount(void) { u32 ccount; - asm volatile ("rsr %0, 234; # CCOUNT\n" : "=r" (ccount)); + asm volatile ("rsr %0, ccount\n" : "=r" (ccount)); return ccount; } diff --git a/arch/xtensa/include/asm/irqflags.h b/arch/xtensa/include/asm/irqflags.h index dae9a8b..f865b1c 100644 --- a/arch/xtensa/include/asm/irqflags.h +++ b/arch/xtensa/include/asm/irqflags.h @@ -16,7 +16,7 @@ static inline unsigned long arch_local_save_flags(void) { unsigned long flags; - asm volatile("rsr %0,"__stringify(PS) : "=a" (flags)); + asm volatile("rsr %0, ps" : "=a" (flags)); return flags; } @@ -41,7 +41,7 @@ static inline void arch_local_irq_enable(void) static inline void arch_local_irq_restore(unsigned long flags) { - asm volatile("wsr %0, "__stringify(PS)" ; rsync" + asm volatile("wsr %0, ps; rsync" :: "a" (flags) : "memory"); } diff --git a/arch/xtensa/include/asm/mmu_context.h b/arch/xtensa/include/asm/mmu_context.h index dbd8731..feb10af 100644 --- a/arch/xtensa/include/asm/mmu_context.h +++ b/arch/xtensa/include/asm/mmu_context.h @@ -51,14 +51,14 @@ extern unsigned long asid_cache; static inline void set_rasid_register (unsigned long val) { - __asm__ __volatile__ (" wsr %0, "__stringify(RASID)"\n\t" + __asm__ __volatile__ (" wsr %0, rasid\n\t" " isync\n" : : "a" (val)); } static inline unsigned long get_rasid_register (void) { unsigned long tmp; - __asm__ __volatile__ (" rsr %0,"__stringify(RASID)"\n\t" : "=a" (tmp)); + __asm__ __volatile__ (" rsr %0, rasid\n\t" : "=a" (tmp)); return tmp; } diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h index a3075b1..8a8aa61 100644 --- a/arch/xtensa/include/asm/regs.h +++ b/arch/xtensa/include/asm/regs.h @@ -27,52 +27,15 @@ /* Special registers. */ -#define LBEG 0 -#define LEND 1 -#define LCOUNT 2 -#define SAR 3 -#define BR 4 -#define SCOMPARE1 12 -#define ACCHI 16 -#define ACCLO 17 -#define MR 32 -#define WINDOWBASE 72 -#define WINDOWSTART 73 -#define PTEVADDR 83 -#define RASID 90 -#define ITLBCFG 91 -#define DTLBCFG 92 -#define IBREAKENABLE 96 -#define DDR 104 -#define IBREAKA 128 -#define DBREAKA 144 -#define DBREAKC 160 -#define EPC 176 -#define EPC_1 177 -#define DEPC 192 -#define EPS 192 -#define EPS_1 193 -#define EXCSAVE 208 -#define EXCSAVE_1 209 -#define INTERRUPT 226 -#define INTENABLE 228 -#define PS 230 -#define THREADPTR 231 -#define EXCCAUSE 232 -#define DEBUGCAUSE 233 -#define CCOUNT 234 -#define PRID 235 -#define ICOUNT 236 -#define ICOUNTLEVEL 237 -#define EXCVADDR 238 -#define CCOMPARE 240 -#define MISC_SR 244 - -/* Special names for read-only and write-only interrupt registers. */ - -#define INTREAD 226 -#define INTSET 226 -#define INTCLEAR 227 +#define SREG_MR 32 +#define SREG_IBREAKA 128 +#define SREG_DBREAKA 144 +#define SREG_DBREAKC 160 +#define SREG_EPC 176 +#define SREG_EPS 192 +#define SREG_EXCSAVE 208 +#define SREG_CCOMPARE 240 +#define SREG_MISC 244 /* EXCCAUSE register fields */ diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h index 053bc42..175b3d5 100644 --- a/arch/xtensa/include/asm/timex.h +++ b/arch/xtensa/include/asm/timex.h @@ -63,10 +63,10 @@ extern cycles_t cacheflush_time; * Register access. */ -#define WSR_CCOUNT(r) asm volatile ("wsr %0,"__stringify(CCOUNT) :: "a" (r)) -#define RSR_CCOUNT(r) asm volatile ("rsr %0,"__stringify(CCOUNT) : "=a" (r)) -#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r)) -#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r)) +#define WSR_CCOUNT(r) asm volatile ("wsr %0, ccount" :: "a" (r)) +#define RSR_CCOUNT(r) asm volatile ("rsr %0, ccount" : "=a" (r)) +#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(SREG_CCOMPARE)"+"__stringify(x) :: "a"(r)) +#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(SREG_CCOMPARE)"+"__stringify(x) : "=a"(r)) static inline unsigned long get_ccount (void) { diff --git a/arch/xtensa/include/asm/tlbflush.h b/arch/xtensa/include/asm/tlbflush.h index 46d2400..43dd348 100644 --- a/arch/xtensa/include/asm/tlbflush.h +++ b/arch/xtensa/include/asm/tlbflush.h @@ -86,26 +86,26 @@ static inline void invalidate_dtlb_entry_no_isync (unsigned entry) static inline void set_itlbcfg_register (unsigned long val) { - __asm__ __volatile__("wsr %0, "__stringify(ITLBCFG)"\n\t" "isync\n\t" + __asm__ __volatile__("wsr %0, itlbcfg\n\t" "isync\n\t" : : "a" (val)); } static inline void set_dtlbcfg_register (unsigned long val) { - __asm__ __volatile__("wsr %0, "__stringify(DTLBCFG)"; dsync\n\t" + __asm__ __volatile__("wsr %0, dtlbcfg; dsync\n\t" : : "a" (val)); } static inline void set_ptevaddr_register (unsigned long val) { - __asm__ __volatile__(" wsr %0, "__stringify(PTEVADDR)"; isync\n" + __asm__ __volatile__(" wsr %0, ptevaddr; isync\n" : : "a" (val)); } static inline unsigned long read_ptevaddr_register (void) { unsigned long tmp; - __asm__ __volatile__("rsr %0, "__stringify(PTEVADDR)"\n\t" : "=a" (tmp)); + __asm__ __volatile__("rsr %0, ptevaddr\n\t" : "=a" (tmp)); return tmp; } diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S index 33d6e9d..934ae58 100644 --- a/arch/xtensa/kernel/align.S +++ b/arch/xtensa/kernel/align.S @@ -170,15 +170,15 @@ ENTRY(fast_unaligned) s32i a7, a2, PT_AREG7 s32i a8, a2, PT_AREG8 - rsr a0, DEPC - xsr a3, EXCSAVE_1 + rsr a0, depc + xsr a3, excsave1 s32i a0, a2, PT_AREG2 s32i a3, a2, PT_AREG3 /* Keep value of SAR in a0 */ - rsr a0, SAR - rsr a8, EXCVADDR # load unaligned memory address + rsr a0, sar + rsr a8, excvaddr # load unaligned memory address /* Now, identify one of the following load/store instructions. * @@ -197,7 +197,7 @@ ENTRY(fast_unaligned) /* Extract the instruction that caused the unaligned access. */ - rsr a7, EPC_1 # load exception address + rsr a7, epc1 # load exception address movi a3, ~3 and a3, a3, a7 # mask lower bits @@ -275,16 +275,16 @@ ENTRY(fast_unaligned) 1: #if XCHAL_HAVE_LOOPS - rsr a5, LEND # check if we reached LEND + rsr a5, lend # check if we reached LEND bne a7, a5, 1f - rsr a5, LCOUNT # and LCOUNT != 0 + rsr a5, lcount # and LCOUNT != 0 beqz a5, 1f addi a5, a5, -1 # decrement LCOUNT and set - rsr a7, LBEG # set PC to LBEGIN - wsr a5, LCOUNT + rsr a7, lbeg # set PC to LBEGIN + wsr a5, lcount #endif -1: wsr a7, EPC_1 # skip load instruction +1: wsr a7, epc1 # skip load instruction extui a4, a4, INSN_T, 4 # extract target register movi a5, .Lload_table addx8 a4, a4, a5 @@ -355,16 +355,16 @@ ENTRY(fast_unaligned) 1: #if XCHAL_HAVE_LOOPS - rsr a4, LEND # check if we reached LEND + rsr a4, lend # check if we reached LEND bne a7, a4, 1f - rsr a4, LCOUNT # and LCOUNT != 0 + rsr a4, lcount # and LCOUNT != 0 beqz a4, 1f addi a4, a4, -1 # decrement LCOUNT and set - rsr a7, LBEG # set PC to LBEGIN - wsr a4, LCOUNT + rsr a7, lbeg # set PC to LBEGIN + wsr a4, lcount #endif -1: wsr a7, EPC_1 # skip store instruction +1: wsr a7, epc1 # skip store instruction movi a4, ~3 and a4, a4, a8 # align memory address @@ -406,7 +406,7 @@ ENTRY(fast_unaligned) .Lexit: movi a4, 0 - rsr a3, EXCSAVE_1 + rsr a3, excsave1 s32i a4, a3, EXC_TABLE_FIXUP /* Restore working register */ @@ -420,7 +420,7 @@ ENTRY(fast_unaligned) /* restore SAR and return */ - wsr a0, SAR + wsr a0, sar l32i a0, a2, PT_AREG0 l32i a2, a2, PT_AREG2 rfe @@ -438,10 +438,10 @@ ENTRY(fast_unaligned) l32i a6, a2, PT_AREG6 l32i a5, a2, PT_AREG5 l32i a4, a2, PT_AREG4 - wsr a0, SAR + wsr a0, sar mov a1, a2 - rsr a0, PS + rsr a0, ps bbsi.l a2, PS_UM_BIT, 1f # jump if user mode movi a0, _kernel_exception diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S index 2bc1e14..54c3be3 100644 --- a/arch/xtensa/kernel/coprocessor.S +++ b/arch/xtensa/kernel/coprocessor.S @@ -43,7 +43,7 @@ /* IO protection is currently unsupported. */ ENTRY(fast_io_protect) - wsr a0, EXCSAVE_1 + wsr a0, excsave1 movi a0, unrecoverable_exception callx0 a0 @@ -220,7 +220,7 @@ ENTRY(coprocessor_restore) */ ENTRY(fast_coprocessor_double) - wsr a0, EXCSAVE_1 + wsr a0, excsave1 movi a0, unrecoverable_exception callx0 a0 @@ -229,13 +229,13 @@ ENTRY(fast_coprocessor) /* Save remaining registers a1-a3 and SAR */ - xsr a3, EXCSAVE_1 + xsr a3, excsave1 s32i a3, a2, PT_AREG3 - rsr a3, SAR + rsr a3, sar s32i a1, a2, PT_AREG1 s32i a3, a2, PT_SAR mov a1, a2 - rsr a2, DEPC + rsr a2, depc s32i a2, a1, PT_AREG2 /* @@ -248,17 +248,17 @@ ENTRY(fast_coprocessor) /* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */ - rsr a3, EXCCAUSE + rsr a3, exccause addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED /* Set corresponding CPENABLE bit -> (sar:cp-index, a3: 1< 0,3,6,9 srli a1, a1, PAGE_SHIFT extui a3, a3, 2, 2 # -> 0,0,1,2 @@ -1583,18 +1583,18 @@ ENTRY(fast_second_level_miss) l32i a0, a2, PT_AREG0 l32i a1, a2, PT_AREG1 l32i a2, a2, PT_DEPC - xsr a3, EXCSAVE_1 + xsr a3, excsave1 bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f /* Restore excsave1 and return. */ - rsr a2, DEPC + rsr a2, depc rfe /* Return from double exception. */ -1: xsr a2, DEPC +1: xsr a2, depc esync rfde @@ -1618,7 +1618,7 @@ ENTRY(fast_second_level_miss) /* Make sure the exception originated in the special functions */ movi a0, __tlbtemp_mapping_start - rsr a3, EPC_1 + rsr a3, epc1 bltu a3, a0, 2f movi a0, __tlbtemp_mapping_end bgeu a3, a0, 2f @@ -1626,7 +1626,7 @@ ENTRY(fast_second_level_miss) /* Check if excvaddr was in one of the TLBTEMP_BASE areas. */ movi a3, TLBTEMP_BASE_1 - rsr a0, EXCVADDR + rsr a0, excvaddr bltu a0, a3, 2f addi a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT)) @@ -1635,7 +1635,7 @@ ENTRY(fast_second_level_miss) /* Check if we have to restore an ITLB mapping. */ movi a1, __tlbtemp_mapping_itlb - rsr a3, EPC_1 + rsr a3, epc1 sub a3, a3, a1 /* Calculate VPN */ @@ -1671,13 +1671,13 @@ ENTRY(fast_second_level_miss) 2: /* Invalid PGD, default exception handling */ movi a3, exc_table - rsr a1, DEPC - xsr a3, EXCSAVE_1 + rsr a1, depc + xsr a3, excsave1 s32i a1, a2, PT_AREG2 s32i a3, a2, PT_AREG3 mov a1, a2 - rsr a2, PS + rsr a2, ps bbsi.l a2, PS_UM_BIT, 1f j _kernel_exception 1: j _user_exception @@ -1712,7 +1712,7 @@ ENTRY(fast_store_prohibited) l32i a0, a1, TASK_MM # tsk->mm beqz a0, 9f -8: rsr a1, EXCVADDR # fault address +8: rsr a1, excvaddr # fault address _PGD_OFFSET(a0, a1, a4) l32i a0, a0, 0 beqz a0, 2f @@ -1725,7 +1725,7 @@ ENTRY(fast_store_prohibited) movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE or a4, a4, a1 - rsr a1, EXCVADDR + rsr a1, excvaddr s32i a4, a0, 0 /* We need to flush the cache if we have page coloring. */ @@ -1749,15 +1749,15 @@ ENTRY(fast_store_prohibited) /* Restore excsave1 and a3. */ - xsr a3, EXCSAVE_1 + xsr a3, excsave1 bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f - rsr a2, DEPC + rsr a2, depc rfe /* Double exception. Restore FIXUP handler and return. */ -1: xsr a2, DEPC +1: xsr a2, depc esync rfde @@ -1766,14 +1766,14 @@ ENTRY(fast_store_prohibited) 2: /* If there was a problem, handle fault in C */ - rsr a4, DEPC # still holds a2 - xsr a3, EXCSAVE_1 + rsr a4, depc # still holds a2 + xsr a3, excsave1 s32i a4, a2, PT_AREG2 s32i a3, a2, PT_AREG3 l32i a4, a2, PT_AREG4 mov a1, a2 - rsr a2, PS + rsr a2, ps bbsi.l a2, PS_UM_BIT, 1f j _kernel_exception 1: j _user_exception @@ -1901,8 +1901,8 @@ ENTRY(_switch_to) /* Disable ints while we manipulate the stack pointer. */ movi a14, (1 << PS_EXCM_BIT) | LOCKLEVEL - xsr a14, PS - rsr a3, EXCSAVE_1 + xsr a14, ps + rsr a3, excsave1 rsync s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */ @@ -1910,7 +1910,7 @@ ENTRY(_switch_to) #if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) l32i a3, a5, THREAD_CPENABLE - xsr a3, CPENABLE + xsr a3, cpenable s32i a3, a4, THREAD_CPENABLE #endif @@ -1924,7 +1924,7 @@ ENTRY(_switch_to) * we return from kernel space. */ - rsr a3, EXCSAVE_1 # exc_table + rsr a3, excsave1 # exc_table movi a6, 0 addi a7, a5, PT_REGS_OFFSET s32i a6, a3, EXC_TABLE_FIXUP @@ -1937,7 +1937,7 @@ ENTRY(_switch_to) load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER - wsr a14, PS + wsr a14, ps mov a2, a12 # return 'prev' rsync diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 3ef91a7..bdc5078 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -61,18 +61,18 @@ _startup: /* Disable interrupts and exceptions. */ movi a0, LOCKLEVEL - wsr a0, PS + wsr a0, ps /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */ - wsr a2, EXCSAVE_1 + wsr a2, excsave1 /* Start with a fresh windowbase and windowstart. */ movi a1, 1 movi a0, 0 - wsr a1, WINDOWSTART - wsr a0, WINDOWBASE + wsr a1, windowstart + wsr a0, windowbase rsync /* Set a0 to 0 for the remaining initialization. */ @@ -82,46 +82,46 @@ _startup: /* Clear debugging registers. */ #if XCHAL_HAVE_DEBUG - wsr a0, IBREAKENABLE - wsr a0, ICOUNT + wsr a0, ibreakenable + wsr a0, icount movi a1, 15 - wsr a0, ICOUNTLEVEL + wsr a0, icountlevel .set _index, 0 .rept XCHAL_NUM_DBREAK - 1 - wsr a0, DBREAKC + _index + wsr a0, SREG_DBREAKC + _index .set _index, _index + 1 .endr #endif /* Clear CCOUNT (not really necessary, but nice) */ - wsr a0, CCOUNT # not really necessary, but nice + wsr a0, ccount # not really necessary, but nice /* Disable zero-loops. */ #if XCHAL_HAVE_LOOPS - wsr a0, LCOUNT + wsr a0, lcount #endif /* Disable all timers. */ .set _index, 0 .rept XCHAL_NUM_TIMERS - 1 - wsr a0, CCOMPARE + _index + wsr a0, SREG_CCOMPARE + _index .set _index, _index + 1 .endr /* Interrupt initialization. */ movi a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE - wsr a0, INTENABLE - wsr a2, INTCLEAR + wsr a0, intenable + wsr a2, intclear /* Disable coprocessors. */ #if XCHAL_CP_NUM > 0 - wsr a0, CPENABLE + wsr a0, cpenable #endif /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0 @@ -132,7 +132,7 @@ _startup: */ movi a1, 1 - wsr a1, PS + wsr a1, ps rsync /* Initialize the caches. @@ -206,18 +206,18 @@ _startup: addi a1, a1, KERNEL_STACK_SIZE movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0 - wsr a2, PS # (enable reg-windows; progmode stack) + wsr a2, ps # (enable reg-windows; progmode stack) rsync /* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/ movi a2, debug_exception - wsr a2, EXCSAVE + XCHAL_DEBUGLEVEL + wsr a2, SREG_EXCSAVE + XCHAL_DEBUGLEVEL /* Set up EXCSAVE[1] to point to the exc_table. */ movi a6, exc_table - xsr a6, EXCSAVE_1 + xsr a6, excsave1 /* init_arch kick-starts the linux kernel */ diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index 98e77c3..a6ce3e5 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -72,13 +72,13 @@ int arch_show_interrupts(struct seq_file *p, int prec) static void xtensa_irq_mask(struct irq_data *d) { cached_irq_mask &= ~(1 << d->irq); - set_sr (cached_irq_mask, INTENABLE); + set_sr (cached_irq_mask, intenable); } static void xtensa_irq_unmask(struct irq_data *d) { cached_irq_mask |= 1 << d->irq; - set_sr (cached_irq_mask, INTENABLE); + set_sr (cached_irq_mask, intenable); } static void xtensa_irq_enable(struct irq_data *d) @@ -95,7 +95,7 @@ static void xtensa_irq_disable(struct irq_data *d) static void xtensa_irq_ack(struct irq_data *d) { - set_sr(1 << d->irq, INTCLEAR); + set_sr(1 << d->irq, intclear); } static int xtensa_irq_retrigger(struct irq_data *d) diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index bc1e14c..92ba9f8 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -202,8 +202,8 @@ extern void do_IRQ(int, struct pt_regs *); void do_interrupt (struct pt_regs *regs) { - unsigned long intread = get_sr (INTREAD); - unsigned long intenable = get_sr (INTENABLE); + unsigned long intread = get_sr (interrupt); + unsigned long intenable = get_sr (intenable); int i, mask; /* Handle all interrupts (no priorities). @@ -213,7 +213,7 @@ void do_interrupt (struct pt_regs *regs) for (i=0, mask = 1; i < XCHAL_NUM_INTERRUPTS; i++, mask <<= 1) { if (mask & (intread & intenable)) { - set_sr (mask, INTCLEAR); + set_sr (mask, intclear); do_IRQ (i,regs); } } @@ -339,7 +339,7 @@ void __init trap_init(void) /* Initialize EXCSAVE_1 to hold the address of the exception table. */ i = (unsigned long)exc_table; - __asm__ __volatile__("wsr %0, "__stringify(EXCSAVE_1)"\n" : : "a" (i)); + __asm__ __volatile__("wsr %0, excsave1\n" : : "a" (i)); } /* @@ -386,16 +386,16 @@ static inline void spill_registers(void) unsigned int a0, ps; __asm__ __volatile__ ( - "movi a14," __stringify (PS_EXCM_BIT) " | 1\n\t" + "movi a14, " __stringify(PS_EXCM_BIT | 1) "\n\t" "mov a12, a0\n\t" - "rsr a13," __stringify(SAR) "\n\t" - "xsr a14," __stringify(PS) "\n\t" + "rsr a13, sar\n\t" + "xsr a14, ps\n\t" "movi a0, _spill_registers\n\t" "rsync\n\t" "callx0 a0\n\t" "mov a0, a12\n\t" - "wsr a13," __stringify(SAR) "\n\t" - "wsr a14," __stringify(PS) "\n\t" + "wsr a13, sar\n\t" + "wsr a14, ps\n\t" :: "a" (&a0), "a" (&ps) : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", "memory"); } diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index 70066e3..4462c1e 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -69,11 +69,11 @@ ENTRY(_UserExceptionVector) - xsr a3, EXCSAVE_1 # save a3 and get dispatch table - wsr a2, DEPC # save a2 + xsr a3, excsave1 # save a3 and get dispatch table + wsr a2, depc # save a2 l32i a2, a3, EXC_TABLE_KSTK # load kernel stack to a2 s32i a0, a2, PT_AREG0 # save a0 to ESF - rsr a0, EXCCAUSE # retrieve exception cause + rsr a0, exccause # retrieve exception cause s32i a0, a2, PT_DEPC # mark it as a regular exception addx4 a0, a0, a3 # find entry in table l32i a0, a0, EXC_TABLE_FAST_USER # load handler @@ -93,11 +93,11 @@ ENTRY(_UserExceptionVector) ENTRY(_KernelExceptionVector) - xsr a3, EXCSAVE_1 # save a3, and get dispatch table - wsr a2, DEPC # save a2 + xsr a3, excsave1 # save a3, and get dispatch table + wsr a2, depc # save a2 addi a2, a1, -16-PT_SIZE # adjust stack pointer s32i a0, a2, PT_AREG0 # save a0 to ESF - rsr a0, EXCCAUSE # retrieve exception cause + rsr a0, exccause # retrieve exception cause s32i a0, a2, PT_DEPC # mark it as a regular exception addx4 a0, a0, a3 # find entry in table l32i a0, a0, EXC_TABLE_FAST_KERNEL # load handler address @@ -205,17 +205,17 @@ ENTRY(_DoubleExceptionVector) /* Deliberately destroy excsave (don't assume it's value was valid). */ - wsr a3, EXCSAVE_1 # save a3 + wsr a3, excsave1 # save a3 /* Check for kernel double exception (usually fatal). */ - rsr a3, PS + rsr a3, ps _bbci.l a3, PS_UM_BIT, .Lksp /* Check if we are currently handling a window exception. */ /* Note: We don't need to indicate that we enter a critical section. */ - xsr a0, DEPC # get DEPC, save a0 + xsr a0, depc # get DEPC, save a0 movi a3, XCHAL_WINDOW_VECTORS_VADDR _bltu a0, a3, .Lfixup @@ -243,21 +243,21 @@ ENTRY(_DoubleExceptionVector) * Note: We can trash the current window frame (a0...a3) and depc! */ - wsr a2, DEPC # save stack pointer temporarily - rsr a0, PS + wsr a2, depc # save stack pointer temporarily + rsr a0, ps extui a0, a0, PS_OWB_SHIFT, 4 - wsr a0, WINDOWBASE + wsr a0, windowbase rsync /* We are now in the previous window frame. Save registers again. */ - xsr a2, DEPC # save a2 and get stack pointer + xsr a2, depc # save a2 and get stack pointer s32i a0, a2, PT_AREG0 - wsr a3, EXCSAVE_1 # save a3 + wsr a3, excsave1 # save a3 movi a3, exc_table - rsr a0, EXCCAUSE + rsr a0, exccause s32i a0, a2, PT_DEPC # mark it as a regular exception addx4 a0, a0, a3 l32i a0, a0, EXC_TABLE_FAST_USER @@ -290,14 +290,14 @@ ENTRY(_DoubleExceptionVector) /* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3 */ - xsr a3, DEPC + xsr a3, depc s32i a0, a2, PT_DEPC s32i a3, a2, PT_AREG0 /* a0: avail, a1: a1, a2: kstk, a3: avail, depc: a2, excsave: a3 */ movi a3, exc_table - rsr a0, EXCCAUSE + rsr a0, exccause addx4 a0, a0, a3 l32i a0, a0, EXC_TABLE_FAST_USER jx a0 @@ -312,7 +312,7 @@ ENTRY(_DoubleExceptionVector) .Lksp: /* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */ - rsr a3, EXCCAUSE + rsr a3, exccause beqi a3, EXCCAUSE_ITLB_MISS, 1f addi a3, a3, -EXCCAUSE_DTLB_MISS bnez a3, .Lunrecoverable @@ -328,11 +328,11 @@ ENTRY(_DoubleExceptionVector) .Lunrecoverable_fixup: l32i a2, a3, EXC_TABLE_DOUBLE_SAVE - xsr a0, DEPC + xsr a0, depc .Lunrecoverable: - rsr a3, EXCSAVE_1 - wsr a0, EXCSAVE_1 + rsr a3, excsave1 + wsr a0, excsave1 movi a0, unrecoverable_exception callx0 a0 @@ -349,7 +349,7 @@ ENTRY(_DoubleExceptionVector) .section .DebugInterruptVector.text, "ax" ENTRY(_DebugInterruptVector) - xsr a0, EXCSAVE + XCHAL_DEBUGLEVEL + xsr a0, SREG_EXCSAVE + XCHAL_DEBUGLEVEL jx a0 diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c index 927acf3..e170010 100644 --- a/arch/xtensa/platforms/iss/setup.c +++ b/arch/xtensa/platforms/iss/setup.c @@ -61,13 +61,13 @@ void platform_restart(void) * jump to the reset vector. */ __asm__ __volatile__("movi a2, 15\n\t" - "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t" + "wsr a2, icountlevel\n\t" "movi a2, 0\n\t" - "wsr a2, " __stringify(ICOUNT) "\n\t" - "wsr a2, " __stringify(IBREAKENABLE) "\n\t" - "wsr a2, " __stringify(LCOUNT) "\n\t" + "wsr a2, icount\n\t" + "wsr a2, ibreakenable\n\t" + "wsr a2, lcount\n\t" "movi a2, 0x1f\n\t" - "wsr a2, " __stringify(PS) "\n\t" + "wsr a2, ps\n\t" "isync\n\t" "jx %0\n\t" : diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c index 9e83940..c7d90f1 100644 --- a/arch/xtensa/platforms/xt2000/setup.c +++ b/arch/xtensa/platforms/xt2000/setup.c @@ -66,13 +66,13 @@ void platform_restart(void) * jump to the reset vector. */ __asm__ __volatile__ ("movi a2, 15\n\t" - "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t" + "wsr a2, icountlevel\n\t" "movi a2, 0\n\t" - "wsr a2, " __stringify(ICOUNT) "\n\t" - "wsr a2, " __stringify(IBREAKENABLE) "\n\t" - "wsr a2, " __stringify(LCOUNT) "\n\t" + "wsr a2, icount\n\t" + "wsr a2, ibreakenable\n\t" + "wsr a2, lcount\n\t" "movi a2, 0x1f\n\t" - "wsr a2, " __stringify(PS) "\n\t" + "wsr a2, ps\n\t" "isync\n\t" "jx %0\n\t" : -- cgit v0.10.2 From 4ded6282caa0b6d0cfa79124610aae1194aa649b Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 21:23:02 +0400 Subject: xtensa: fix unaligned usermode access - correct use of .config #define name; CONFIG_UNALIGNED_USER ---> CONFIG_XTENSA_UNALIGNED_USER Signed-off-by: Max Filippov Signed-off-by: Pete Delaney Signed-off-by: Chris Zankel diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index 92ba9f8..5caf2b6 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -97,7 +97,7 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = { /* EXCCAUSE_INTEGER_DIVIDE_BY_ZERO unhandled */ /* EXCCAUSE_PRIVILEGED unhandled */ #if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION -#ifdef CONFIG_UNALIGNED_USER +#ifdef CONFIG_XTENSA_UNALIGNED_USER { EXCCAUSE_UNALIGNED, USER, fast_unaligned }, #else { EXCCAUSE_UNALIGNED, 0, do_unaligned_user }, @@ -244,7 +244,7 @@ do_illegal_instruction(struct pt_regs *regs) */ #if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION -#ifndef CONFIG_UNALIGNED_USER +#ifndef CONFIG_XTENSA_UNALIGNED_USER void do_unaligned_user (struct pt_regs *regs) { -- cgit v0.10.2 From 83596729adbca4ff3b0273de22e166c64aea49ec Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 15 Oct 2012 03:55:40 +0400 Subject: UAPI: (Scripted) Disintegrate arch/xtensa/include/asm UAPI: (Scripted) Disintegrate arch/xtensa/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index fccd81e..4a159da 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -1,4 +1,3 @@ -include include/asm-generic/Kbuild.asm generic-y += clkdev.h generic-y += exec.h diff --git a/arch/xtensa/include/asm/auxvec.h b/arch/xtensa/include/asm/auxvec.h deleted file mode 100644 index 257dec7..0000000 --- a/arch/xtensa/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __XTENSA_AUXVEC_H -#define __XTENSA_AUXVEC_H - -#endif diff --git a/arch/xtensa/include/asm/bitsperlong.h b/arch/xtensa/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0..0000000 --- a/arch/xtensa/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/byteorder.h b/arch/xtensa/include/asm/byteorder.h deleted file mode 100644 index 54eb631..0000000 --- a/arch/xtensa/include/asm/byteorder.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _XTENSA_BYTEORDER_H -#define _XTENSA_BYTEORDER_H - -#ifdef __XTENSA_EL__ -#include -#elif defined(__XTENSA_EB__) -#include -#else -# error processor byte order undefined! -#endif - -#endif /* _XTENSA_BYTEORDER_H */ diff --git a/arch/xtensa/include/asm/errno.h b/arch/xtensa/include/asm/errno.h deleted file mode 100644 index a0f3b96..0000000 --- a/arch/xtensa/include/asm/errno.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/errno.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_ERRNO_H -#define _XTENSA_ERRNO_H - -#include - -#endif /* _XTENSA_ERRNO_H */ diff --git a/arch/xtensa/include/asm/fcntl.h b/arch/xtensa/include/asm/fcntl.h deleted file mode 100644 index 46ab12d..0000000 --- a/arch/xtensa/include/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/ioctl.h b/arch/xtensa/include/asm/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/arch/xtensa/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h deleted file mode 100644 index 2aa4cd9..0000000 --- a/arch/xtensa/include/asm/ioctls.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * include/asm-xtensa/ioctls.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 - 2005 Tensilica Inc. - * - * Derived from "include/asm-i386/ioctls.h" - */ - -#ifndef _XTENSA_IOCTLS_H -#define _XTENSA_IOCTLS_H - -#include - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 - -#define TCGETA _IOR('t', 23, struct termio) -#define TCSETA _IOW('t', 24, struct termio) -#define TCSETAW _IOW('t', 25, struct termio) -#define TCSETAF _IOW('t', 28, struct termio) - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ _IOW('t', 103, struct winsize) -#define TIOCGWINSZ _IOR('t', 104, struct winsize) -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL _IO('T', 12) -#define TIOCNXCL _IO('T', 13) -#define TIOCSCTTY _IO('T', 14) - -#define TIOCSTI _IOW('T', 18, char) -#define TIOCMGET _IOR('T', 21, unsigned int) -#define TIOCMBIS _IOW('T', 22, unsigned int) -#define TIOCMBIC _IOW('T', 23, unsigned int) -#define TIOCMSET _IOW('T', 24, unsigned int) -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG - -#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) -#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) -#define TIOCLINUX _IOW('T', 28, char) -#define TIOCCONS _IO('T', 29) -#define TIOCGSERIAL 0x803C541E /*_IOR('T', 30, struct serial_struct)*/ -#define TIOCSSERIAL 0x403C541F /*_IOW('T', 31, struct serial_struct)*/ -#define TIOCPKT _IOW('T', 32, int) -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 -# define TIOCPKT_IOCTL 64 - - -#define TIOCNOTTY _IO('T', 34) -#define TIOCSETD _IOW('T', 35, int) -#define TIOCGETD _IOR('T', 36, int) -#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/ -#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/ -#define TIOCSBRK _IO('T', 39) /* BSD compatibility */ -#define TIOCCBRK _IO('T', 40) /* BSD compatibility */ -#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/ -#define TCGETS2 _IOR('T', 42, struct termios2) -#define TCSETS2 _IOW('T', 43, struct termios2) -#define TCSETSW2 _IOW('T', 44, struct termios2) -#define TCSETSF2 _IOW('T', 45, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ -#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ -#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ -#define TIOCVHANGUP _IO('T', 0x37) - -#define TIOCSERCONFIG _IO('T', 83) -#define TIOCSERGWILD _IOR('T', 84, int) -#define TIOCSERSWILD _IOW('T', 85, int) -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */ -#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */ - -#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* _XTENSA_IOCTLS_H */ diff --git a/arch/xtensa/include/asm/ipcbuf.h b/arch/xtensa/include/asm/ipcbuf.h deleted file mode 100644 index c33aa6a..0000000 --- a/arch/xtensa/include/asm/ipcbuf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-xtensa/ipcbuf.h - * - * The ipc64_perm structure for the Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_IPCBUF_H -#define _XTENSA_IPCBUF_H - -/* - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned long seq; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _XTENSA_IPCBUF_H */ diff --git a/arch/xtensa/include/asm/kvm_para.h b/arch/xtensa/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f..0000000 --- a/arch/xtensa/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/mman.h b/arch/xtensa/include/asm/mman.h deleted file mode 100644 index 25bc6c1..0000000 --- a/arch/xtensa/include/asm/mman.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * include/asm-xtensa/mman.h - * - * Xtensa Processor memory-manager definitions - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 by Ralf Baechle - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_MMAN_H -#define _XTENSA_MMAN_H - -/* - * Protections are chosen from these bits, OR'd together. The - * implementation does not necessarily support PROT_EXEC or PROT_WRITE - * without PROT_READ. The only guarantees are that no writing will be - * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. - */ - -#define PROT_NONE 0x0 /* page can not be accessed */ -#define PROT_READ 0x1 /* page can be read */ -#define PROT_WRITE 0x2 /* page can be written */ -#define PROT_EXEC 0x4 /* page can be executed */ - -#define PROT_SEM 0x10 /* page may be used for atomic ops */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end fo growsup vma */ - -/* - * Flags for mmap - */ -#define MAP_SHARED 0x001 /* Share changes */ -#define MAP_PRIVATE 0x002 /* Changes are private */ -#define MAP_TYPE 0x00f /* Mask for type of mapping */ -#define MAP_FIXED 0x010 /* Interpret addr exactly */ - -/* not used by linux, but here to make sure we don't clash with ABI defines */ -#define MAP_RENAME 0x020 /* Assign page to file */ -#define MAP_AUTOGROW 0x040 /* File may grow by writing */ -#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ -#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ - -/* These are linux-specific */ -#define MAP_NORESERVE 0x0400 /* don't check for reservations */ -#define MAP_ANONYMOUS 0x0800 /* don't use a file */ -#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ -#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ -#define MAP_LOCKED 0x8000 /* pages are locked */ -#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x20000 /* do not block on IO */ -#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ -#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ - -/* - * Flags for msync - */ -#define MS_ASYNC 0x0001 /* sync memory asynchronously */ -#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ -#define MS_SYNC 0x0004 /* synchronous memory sync */ - -/* - * Flags for mlockall - */ -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#define MADV_NORMAL 0 /* no further special treatment */ -#define MADV_RANDOM 1 /* expect random page references */ -#define MADV_SEQUENTIAL 2 /* expect sequential page references */ -#define MADV_WILLNEED 3 /* will need these pages */ -#define MADV_DONTNEED 4 /* don't need these pages */ - -/* common parameters: try to keep these consistent across architectures */ -#define MADV_REMOVE 9 /* remove these pages & resources */ -#define MADV_DONTFORK 10 /* don't inherit across fork */ -#define MADV_DOFORK 11 /* do inherit across fork */ - -#define MADV_MERGEABLE 12 /* KSM may merge identical pages */ -#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */ - -#define MADV_HUGEPAGE 14 /* Worth backing with hugepages */ -#define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */ - -#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump, - overrides the coredump filter bits */ -#define MADV_DODUMP 17 /* Clear the MADV_NODUMP flag */ - -/* compatibility flags */ -#define MAP_FILE 0 - -#endif /* _XTENSA_MMAN_H */ diff --git a/arch/xtensa/include/asm/msgbuf.h b/arch/xtensa/include/asm/msgbuf.h deleted file mode 100644 index 693c967..0000000 --- a/arch/xtensa/include/asm/msgbuf.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-xtensa/msgbuf.h - * - * The msqid64_ds structure for the Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef _XTENSA_MSGBUF_H -#define _XTENSA_MSGBUF_H - -struct msqid64_ds { - struct ipc64_perm msg_perm; -#ifdef __XTENSA_EB__ - unsigned int __unused1; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned int __unused2; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned int __unused3; - __kernel_time_t msg_ctime; /* last change time */ -#elif defined(__XTENSA_EL__) - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned int __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned int __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned int __unused3; -#else -# error processor byte order undefined! -#endif - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _XTENSA_MSGBUF_H */ diff --git a/arch/xtensa/include/asm/param.h b/arch/xtensa/include/asm/param.h index ba03d5a..0a70e78 100644 --- a/arch/xtensa/include/asm/param.h +++ b/arch/xtensa/include/asm/param.h @@ -7,28 +7,12 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_PARAM_H #define _XTENSA_PARAM_H -#ifdef __KERNEL__ +#include + # define HZ CONFIG_HZ /* internal timer frequency */ # define USER_HZ 100 /* for user interfaces in "ticks" */ # define CLOCKS_PER_SEC (USER_HZ) /* frequnzy at which times() counts */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NGROUPS -#define NGROUPS 32 -#endif - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - #endif /* _XTENSA_PARAM_H */ diff --git a/arch/xtensa/include/asm/poll.h b/arch/xtensa/include/asm/poll.h deleted file mode 100644 index 9d2d599..0000000 --- a/arch/xtensa/include/asm/poll.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-xtensa/poll.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_POLL_H -#define _XTENSA_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 0x0100 -#define POLLREMOVE 0x0800 - -#include - -#endif /* _XTENSA_POLL_H */ diff --git a/arch/xtensa/include/asm/posix_types.h b/arch/xtensa/include/asm/posix_types.h deleted file mode 100644 index 6e96be0..0000000 --- a/arch/xtensa/include/asm/posix_types.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-xtensa/posix_types.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Largely copied from include/asm-ppc/posix_types.h - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_POSIX_TYPES_H -#define _XTENSA_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t - -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef long __kernel_ptrdiff_t; -#define __kernel_size_t __kernel_size_t - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -#define __kernel_old_uid_t __kernel_old_uid_t - -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif /* _XTENSA_POSIX_TYPES_H */ diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h index d85d38d..da21c17 100644 --- a/arch/xtensa/include/asm/ptrace.h +++ b/arch/xtensa/include/asm/ptrace.h @@ -7,73 +7,11 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_PTRACE_H #define _XTENSA_PTRACE_H -/* - * Kernel stack - * - * +-----------------------+ -------- STACK_SIZE - * | register file | | - * +-----------------------+ | - * | struct pt_regs | | - * +-----------------------+ | ------ PT_REGS_OFFSET - * double : 16 bytes spill area : | ^ - * excetion :- - - - - - - - - - - -: | | - * frame : struct pt_regs : | | - * :- - - - - - - - - - - -: | | - * | | | | - * | memory stack | | | - * | | | | - * ~ ~ ~ ~ - * ~ ~ ~ ~ - * | | | | - * | | | | - * +-----------------------+ | | --- STACK_BIAS - * | struct task_struct | | | ^ - * current --> +-----------------------+ | | | - * | struct thread_info | | | | - * +-----------------------+ -------- - */ - -#define KERNEL_STACK_SIZE (2 * PAGE_SIZE) - -/* Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */ - -#define EXC_TABLE_KSTK 0x004 /* Kernel Stack */ -#define EXC_TABLE_DOUBLE_SAVE 0x008 /* Double exception save area for a0 */ -#define EXC_TABLE_FIXUP 0x00c /* Fixup handler */ -#define EXC_TABLE_PARAM 0x010 /* For passing a parameter to fixup */ -#define EXC_TABLE_SYSCALL_SAVE 0x014 /* For fast syscall handler */ -#define EXC_TABLE_FAST_USER 0x100 /* Fast user exception handler */ -#define EXC_TABLE_FAST_KERNEL 0x200 /* Fast kernel exception handler */ -#define EXC_TABLE_DEFAULT 0x300 /* Default C-Handler */ -#define EXC_TABLE_SIZE 0x400 +#include -/* Registers used by strace */ - -#define REG_A_BASE 0x0000 -#define REG_AR_BASE 0x0100 -#define REG_PC 0x0020 -#define REG_PS 0x02e6 -#define REG_WB 0x0248 -#define REG_WS 0x0249 -#define REG_LBEG 0x0200 -#define REG_LEND 0x0201 -#define REG_LCOUNT 0x0202 -#define REG_SAR 0x0203 - -#define SYSCALL_NR 0x00ff - -/* Other PTRACE_ values defined in using values 0-9,16,17,24 */ - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETXTREGS 18 -#define PTRACE_SETXTREGS 19 - -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ @@ -132,6 +70,4 @@ struct pt_regs { #endif /* !__ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #endif /* _XTENSA_PTRACE_H */ diff --git a/arch/xtensa/include/asm/resource.h b/arch/xtensa/include/asm/resource.h deleted file mode 100644 index 17b5ab3..0000000 --- a/arch/xtensa/include/asm/resource.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/resource.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_RESOURCE_H -#define _XTENSA_RESOURCE_H - -#include - -#endif /* _XTENSA_RESOURCE_H */ diff --git a/arch/xtensa/include/asm/sembuf.h b/arch/xtensa/include/asm/sembuf.h deleted file mode 100644 index c158704..0000000 --- a/arch/xtensa/include/asm/sembuf.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-xtensa/sembuf.h - * - * The semid64_ds structure for Xtensa architecture. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - * - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - */ - -#ifndef _XTENSA_SEMBUF_H -#define _XTENSA_SEMBUF_H - -#include - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#ifdef __XTENSA_EL__ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; -#else - unsigned long __unused1; - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused2; - __kernel_time_t sem_ctime; /* last change time */ -#endif - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_XTENSA_SEMBUF_H */ diff --git a/arch/xtensa/include/asm/setup.h b/arch/xtensa/include/asm/setup.h deleted file mode 100644 index 9fa8ad9..0000000 --- a/arch/xtensa/include/asm/setup.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-xtensa/setup.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SETUP_H -#define _XTENSA_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -extern void set_except_vector(int n, void *addr); - -#endif diff --git a/arch/xtensa/include/asm/shmbuf.h b/arch/xtensa/include/asm/shmbuf.h deleted file mode 100644 index ad4b012..0000000 --- a/arch/xtensa/include/asm/shmbuf.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-xtensa/shmbuf.h - * - * The shmid64_ds structure for Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SHMBUF_H -#define _XTENSA_SHMBUF_H - -#if defined (__XTENSA_EL__) -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; -#elif defined (__XTENSA_EB__) -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; -#else -# error endian order not defined -#endif - - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _XTENSA_SHMBUF_H */ diff --git a/arch/xtensa/include/asm/sigcontext.h b/arch/xtensa/include/asm/sigcontext.h deleted file mode 100644 index 03383af..0000000 --- a/arch/xtensa/include/asm/sigcontext.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-xtensa/sigcontext.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGCONTEXT_H -#define _XTENSA_SIGCONTEXT_H - - -struct sigcontext { - unsigned long sc_pc; - unsigned long sc_ps; - unsigned long sc_lbeg; - unsigned long sc_lend; - unsigned long sc_lcount; - unsigned long sc_sar; - unsigned long sc_acclo; - unsigned long sc_acchi; - unsigned long sc_a[16]; - void *sc_xtregs; -}; - -#endif /* _XTENSA_SIGCONTEXT_H */ diff --git a/arch/xtensa/include/asm/siginfo.h b/arch/xtensa/include/asm/siginfo.h deleted file mode 100644 index 6916248..0000000 --- a/arch/xtensa/include/asm/siginfo.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/siginfo.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGINFO_H -#define _XTENSA_SIGINFO_H - -#include - -#endif /* _XTENSA_SIGINFO_H */ diff --git a/arch/xtensa/include/asm/signal.h b/arch/xtensa/include/asm/signal.h index 7f201b9..72fd44c 100644 --- a/arch/xtensa/include/asm/signal.h +++ b/arch/xtensa/include/asm/signal.h @@ -9,117 +9,12 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_SIGNAL_H #define _XTENSA_SIGNAL_H - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -#ifndef __ASSEMBLY__ - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; -typedef unsigned long old_sigset_t; /* at least 32 bits */ -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#endif - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* #define SIGLOST 29 */ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX (_NSIG-1) - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 +#include #ifndef __ASSEMBLY__ - -#define SIG_BLOCK 0 /* for blocking signals */ -#define SIG_UNBLOCK 1 /* for unblocking signals */ -#define SIG_SETMASK 2 /* for setting the signal mask */ - -/* Type of a signal handler. */ -typedef void (*__sighandler_t)(int); - -#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ -#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ -#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ - -#ifdef __KERNEL__ struct sigaction { __sighandler_t sa_handler; unsigned long sa_flags; @@ -131,35 +26,8 @@ struct k_sigaction { struct sigaction sa; }; -#else - -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ #include #define ptrace_signal_deliver(regs, cookie) do { } while (0) -#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _XTENSA_SIGNAL_H */ diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h deleted file mode 100644 index e36c681..0000000 --- a/arch/xtensa/include/asm/socket.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * include/asm-xtensa/socket.h - * - * Copied from i386. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _XTENSA_SOCKET_H -#define _XTENSA_SOCKET_H - -#include - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ - -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ - -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#endif /* _XTENSA_SOCKET_H */ diff --git a/arch/xtensa/include/asm/sockios.h b/arch/xtensa/include/asm/sockios.h deleted file mode 100644 index efe0af3..0000000 --- a/arch/xtensa/include/asm/sockios.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-xtensa/sockios.h - * - * Socket-level I/O control calls. Copied from MIPS. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 by Ralf Baechle - * Copyright (C) 2001 Tensilica Inc. - */ - -#ifndef _XTENSA_SOCKIOS_H -#define _XTENSA_SOCKIOS_H - -#include - -/* Socket-level I/O control calls. */ - -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _XTENSA_SOCKIOS_H */ diff --git a/arch/xtensa/include/asm/stat.h b/arch/xtensa/include/asm/stat.h deleted file mode 100644 index c499203..0000000 --- a/arch/xtensa/include/asm/stat.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * include/asm-xtensa/stat.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_STAT_H -#define _XTENSA_STAT_H - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned long st_rdev; - long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -struct stat64 { - unsigned long long st_dev; /* Device */ - unsigned long long st_ino; /* File serial number */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - long long st_size; /* Size of file, in bytes. */ - unsigned long st_blksize; /* Optimal block size for I/O. */ - unsigned long __unused2; - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long st_atime; /* Time of last access. */ - unsigned long st_atime_nsec; - unsigned long st_mtime; /* Time of last modification. */ - unsigned long st_mtime_nsec; - unsigned long st_ctime; /* Time of last status change. */ - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _XTENSA_STAT_H */ diff --git a/arch/xtensa/include/asm/statfs.h b/arch/xtensa/include/asm/statfs.h deleted file mode 100644 index 9c3d1a2..0000000 --- a/arch/xtensa/include/asm/statfs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-xtensa/statfs.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_STATFS_H -#define _XTENSA_STATFS_H - -#include - -#endif /* _XTENSA_STATFS_H */ - diff --git a/arch/xtensa/include/asm/swab.h b/arch/xtensa/include/asm/swab.h deleted file mode 100644 index 226a391..0000000 --- a/arch/xtensa/include/asm/swab.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-xtensa/swab.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SWAB_H -#define _XTENSA_SWAB_H - -#include -#include - -#define __SWAB_64_THRU_32__ - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - __u32 res; - /* instruction sequence from Xtensa ISA release 2/2000 */ - __asm__("ssai 8 \n\t" - "srli %0, %1, 16 \n\t" - "src %0, %0, %1 \n\t" - "src %0, %0, %0 \n\t" - "src %0, %1, %0 \n" - : "=&a" (res) - : "a" (x) - ); - return res; -} -#define __arch_swab32 __arch_swab32 - -static inline __attribute_const__ __u16 __arch_swab16(__u16 x) -{ - /* Given that 'short' values are signed (i.e., can be negative), - * we cannot assume that the upper 16-bits of the register are - * zero. We are careful to mask values after shifting. - */ - - /* There exists an anomaly between xt-gcc and xt-xcc. xt-gcc - * inserts an extui instruction after putting this function inline - * to ensure that it uses only the least-significant 16 bits of - * the result. xt-xcc doesn't use an extui, but assumes the - * __asm__ macro follows convention that the upper 16 bits of an - * 'unsigned short' result are still zero. This macro doesn't - * follow convention; indeed, it leaves garbage in the upport 16 - * bits of the register. - - * Declaring the temporary variables 'res' and 'tmp' to be 32-bit - * types while the return type of the function is a 16-bit type - * forces both compilers to insert exactly one extui instruction - * (or equivalent) to mask off the upper 16 bits. */ - - __u32 res; - __u32 tmp; - - __asm__("extui %1, %2, 8, 8\n\t" - "slli %0, %2, 8 \n\t" - "or %0, %0, %1 \n" - : "=&a" (res), "=&a" (tmp) - : "a" (x) - ); - - return res; -} -#define __arch_swab16 __arch_swab16 - -#endif /* _XTENSA_SWAB_H */ diff --git a/arch/xtensa/include/asm/termbits.h b/arch/xtensa/include/asm/termbits.h deleted file mode 100644 index 0d6c871..0000000 --- a/arch/xtensa/include/asm/termbits.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * include/asm-xtensa/termbits.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TERMBITS_H -#define _XTENSA_TERMBITS_H - - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ - -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ - -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ - -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ - -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ - -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ - -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ - -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ - -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _XTENSA_TERMBITS_H */ diff --git a/arch/xtensa/include/asm/termios.h b/arch/xtensa/include/asm/termios.h index 4673f42..8b661ca 100644 --- a/arch/xtensa/include/asm/termios.h +++ b/arch/xtensa/include/asm/termios.h @@ -9,50 +9,11 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_TERMIOS_H #define _XTENSA_TERMIOS_H -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* Modem lines */ +#include -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ /* intr=^C quit=^\ erase=del kill=^U eof=^D vtime=\0 vmin=\1 sxtc=\0 @@ -100,6 +61,4 @@ struct termio { #define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) #define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) -#endif /* __KERNEL__ */ - #endif /* _XTENSA_TERMIOS_H */ diff --git a/arch/xtensa/include/asm/types.h b/arch/xtensa/include/asm/types.h index 6d4db7e..2b410b8 100644 --- a/arch/xtensa/include/asm/types.h +++ b/arch/xtensa/include/asm/types.h @@ -7,30 +7,17 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_TYPES_H #define _XTENSA_TYPES_H -#include - -#ifdef __ASSEMBLY__ -# define __XTENSA_UL(x) (x) -# define __XTENSA_UL_CONST(x) x -#else -# define __XTENSA_UL(x) ((unsigned long)(x)) -# define __XTENSA_UL_CONST(x) x##UL -#endif +#include #ifndef __ASSEMBLY__ - /* * These aren't exported outside the kernel to avoid name space clashes */ -#ifdef __KERNEL__ #define BITS_PER_LONG 32 -#endif /* __KERNEL__ */ #endif - #endif /* _XTENSA_TYPES_H */ diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index bc7e005..9ef1c31 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -8,705 +8,8 @@ * Copyright (C) 2001 - 2005 Tensilica Inc. */ -#ifndef _XTENSA_UNISTD_H -#define _XTENSA_UNISTD_H +#include -#ifndef __SYSCALL -# define __SYSCALL(nr,func,nargs) -#endif - -#define __NR_spill 0 -__SYSCALL( 0, sys_ni_syscall, 0) -#define __NR_xtensa 1 -__SYSCALL( 1, sys_ni_syscall, 0) -#define __NR_available4 2 -__SYSCALL( 2, sys_ni_syscall, 0) -#define __NR_available5 3 -__SYSCALL( 3, sys_ni_syscall, 0) -#define __NR_available6 4 -__SYSCALL( 4, sys_ni_syscall, 0) -#define __NR_available7 5 -__SYSCALL( 5, sys_ni_syscall, 0) -#define __NR_available8 6 -__SYSCALL( 6, sys_ni_syscall, 0) -#define __NR_available9 7 -__SYSCALL( 7, sys_ni_syscall, 0) - -/* File Operations */ - -#define __NR_open 8 -__SYSCALL( 8, sys_open, 3) -#define __NR_close 9 -__SYSCALL( 9, sys_close, 1) -#define __NR_dup 10 -__SYSCALL( 10, sys_dup, 1) -#define __NR_dup2 11 -__SYSCALL( 11, sys_dup2, 2) -#define __NR_read 12 -__SYSCALL( 12, sys_read, 3) -#define __NR_write 13 -__SYSCALL( 13, sys_write, 3) -#define __NR_select 14 -__SYSCALL( 14, sys_select, 5) -#define __NR_lseek 15 -__SYSCALL( 15, sys_lseek, 3) -#define __NR_poll 16 -__SYSCALL( 16, sys_poll, 3) -#define __NR__llseek 17 -__SYSCALL( 17, sys_llseek, 5) -#define __NR_epoll_wait 18 -__SYSCALL( 18, sys_epoll_wait, 4) -#define __NR_epoll_ctl 19 -__SYSCALL( 19, sys_epoll_ctl, 4) -#define __NR_epoll_create 20 -__SYSCALL( 20, sys_epoll_create, 1) -#define __NR_creat 21 -__SYSCALL( 21, sys_creat, 2) -#define __NR_truncate 22 -__SYSCALL( 22, sys_truncate, 2) -#define __NR_ftruncate 23 -__SYSCALL( 23, sys_ftruncate, 2) -#define __NR_readv 24 -__SYSCALL( 24, sys_readv, 3) -#define __NR_writev 25 -__SYSCALL( 25, sys_writev, 3) -#define __NR_fsync 26 -__SYSCALL( 26, sys_fsync, 1) -#define __NR_fdatasync 27 -__SYSCALL( 27, sys_fdatasync, 1) -#define __NR_truncate64 28 -__SYSCALL( 28, sys_truncate64, 2) -#define __NR_ftruncate64 29 -__SYSCALL( 29, sys_ftruncate64, 2) -#define __NR_pread64 30 -__SYSCALL( 30, sys_pread64, 6) -#define __NR_pwrite64 31 -__SYSCALL( 31, sys_pwrite64, 6) - -#define __NR_link 32 -__SYSCALL( 32, sys_link, 2) -#define __NR_rename 33 -__SYSCALL( 33, sys_rename, 2) -#define __NR_symlink 34 -__SYSCALL( 34, sys_symlink, 2) -#define __NR_readlink 35 -__SYSCALL( 35, sys_readlink, 3) -#define __NR_mknod 36 -__SYSCALL( 36, sys_mknod, 3) -#define __NR_pipe 37 -__SYSCALL( 37, sys_pipe, 1) -#define __NR_unlink 38 -__SYSCALL( 38, sys_unlink, 1) -#define __NR_rmdir 39 -__SYSCALL( 39, sys_rmdir, 1) - -#define __NR_mkdir 40 -__SYSCALL( 40, sys_mkdir, 2) -#define __NR_chdir 41 -__SYSCALL( 41, sys_chdir, 1) -#define __NR_fchdir 42 -__SYSCALL( 42, sys_fchdir, 1) -#define __NR_getcwd 43 -__SYSCALL( 43, sys_getcwd, 2) - -#define __NR_chmod 44 -__SYSCALL( 44, sys_chmod, 2) -#define __NR_chown 45 -__SYSCALL( 45, sys_chown, 3) -#define __NR_stat 46 -__SYSCALL( 46, sys_newstat, 2) -#define __NR_stat64 47 -__SYSCALL( 47, sys_stat64, 2) - -#define __NR_lchown 48 -__SYSCALL( 48, sys_lchown, 3) -#define __NR_lstat 49 -__SYSCALL( 49, sys_newlstat, 2) -#define __NR_lstat64 50 -__SYSCALL( 50, sys_lstat64, 2) -#define __NR_available51 51 -__SYSCALL( 51, sys_ni_syscall, 0) - -#define __NR_fchmod 52 -__SYSCALL( 52, sys_fchmod, 2) -#define __NR_fchown 53 -__SYSCALL( 53, sys_fchown, 3) -#define __NR_fstat 54 -__SYSCALL( 54, sys_newfstat, 2) -#define __NR_fstat64 55 -__SYSCALL( 55, sys_fstat64, 2) - -#define __NR_flock 56 -__SYSCALL( 56, sys_flock, 2) -#define __NR_access 57 -__SYSCALL( 57, sys_access, 2) -#define __NR_umask 58 -__SYSCALL( 58, sys_umask, 1) -#define __NR_getdents 59 -__SYSCALL( 59, sys_getdents, 3) -#define __NR_getdents64 60 -__SYSCALL( 60, sys_getdents64, 3) -#define __NR_fcntl64 61 -__SYSCALL( 61, sys_fcntl64, 3) -#define __NR_available62 62 -__SYSCALL( 62, sys_ni_syscall, 0) -#define __NR_fadvise64_64 63 -__SYSCALL( 63, xtensa_fadvise64_64, 6) -#define __NR_utime 64 /* glibc 2.3.3 ?? */ -__SYSCALL( 64, sys_utime, 2) -#define __NR_utimes 65 -__SYSCALL( 65, sys_utimes, 2) -#define __NR_ioctl 66 -__SYSCALL( 66, sys_ioctl, 3) -#define __NR_fcntl 67 -__SYSCALL( 67, sys_fcntl, 3) - -#define __NR_setxattr 68 -__SYSCALL( 68, sys_setxattr, 5) -#define __NR_getxattr 69 -__SYSCALL( 69, sys_getxattr, 4) -#define __NR_listxattr 70 -__SYSCALL( 70, sys_listxattr, 3) -#define __NR_removexattr 71 -__SYSCALL( 71, sys_removexattr, 2) -#define __NR_lsetxattr 72 -__SYSCALL( 72, sys_lsetxattr, 5) -#define __NR_lgetxattr 73 -__SYSCALL( 73, sys_lgetxattr, 4) -#define __NR_llistxattr 74 -__SYSCALL( 74, sys_llistxattr, 3) -#define __NR_lremovexattr 75 -__SYSCALL( 75, sys_lremovexattr, 2) -#define __NR_fsetxattr 76 -__SYSCALL( 76, sys_fsetxattr, 5) -#define __NR_fgetxattr 77 -__SYSCALL( 77, sys_fgetxattr, 4) -#define __NR_flistxattr 78 -__SYSCALL( 78, sys_flistxattr, 3) -#define __NR_fremovexattr 79 -__SYSCALL( 79, sys_fremovexattr, 2) - -/* File Map / Shared Memory Operations */ - -#define __NR_mmap2 80 -__SYSCALL( 80, sys_mmap_pgoff, 6) -#define __NR_munmap 81 -__SYSCALL( 81, sys_munmap, 2) -#define __NR_mprotect 82 -__SYSCALL( 82, sys_mprotect, 3) -#define __NR_brk 83 -__SYSCALL( 83, sys_brk, 1) -#define __NR_mlock 84 -__SYSCALL( 84, sys_mlock, 2) -#define __NR_munlock 85 -__SYSCALL( 85, sys_munlock, 2) -#define __NR_mlockall 86 -__SYSCALL( 86, sys_mlockall, 1) -#define __NR_munlockall 87 -__SYSCALL( 87, sys_munlockall, 0) -#define __NR_mremap 88 -__SYSCALL( 88, sys_mremap, 4) -#define __NR_msync 89 -__SYSCALL( 89, sys_msync, 3) -#define __NR_mincore 90 -__SYSCALL( 90, sys_mincore, 3) -#define __NR_madvise 91 -__SYSCALL( 91, sys_madvise, 3) -#define __NR_shmget 92 -__SYSCALL( 92, sys_shmget, 4) -#define __NR_shmat 93 -__SYSCALL( 93, xtensa_shmat, 4) -#define __NR_shmctl 94 -__SYSCALL( 94, sys_shmctl, 4) -#define __NR_shmdt 95 -__SYSCALL( 95, sys_shmdt, 4) - -/* Socket Operations */ - -#define __NR_socket 96 -__SYSCALL( 96, sys_socket, 3) -#define __NR_setsockopt 97 -__SYSCALL( 97, sys_setsockopt, 5) -#define __NR_getsockopt 98 -__SYSCALL( 98, sys_getsockopt, 5) -#define __NR_shutdown 99 -__SYSCALL( 99, sys_shutdown, 2) - -#define __NR_bind 100 -__SYSCALL(100, sys_bind, 3) -#define __NR_connect 101 -__SYSCALL(101, sys_connect, 3) -#define __NR_listen 102 -__SYSCALL(102, sys_listen, 2) -#define __NR_accept 103 -__SYSCALL(103, sys_accept, 3) - -#define __NR_getsockname 104 -__SYSCALL(104, sys_getsockname, 3) -#define __NR_getpeername 105 -__SYSCALL(105, sys_getpeername, 3) -#define __NR_sendmsg 106 -__SYSCALL(106, sys_sendmsg, 3) -#define __NR_recvmsg 107 -__SYSCALL(107, sys_recvmsg, 3) -#define __NR_send 108 -__SYSCALL(108, sys_send, 4) -#define __NR_recv 109 -__SYSCALL(109, sys_recv, 4) -#define __NR_sendto 110 -__SYSCALL(110, sys_sendto, 6) -#define __NR_recvfrom 111 -__SYSCALL(111, sys_recvfrom, 6) - -#define __NR_socketpair 112 -__SYSCALL(112, sys_socketpair, 4) -#define __NR_sendfile 113 -__SYSCALL(113, sys_sendfile, 4) -#define __NR_sendfile64 114 -__SYSCALL(114, sys_sendfile64, 4) -#define __NR_available115 115 -__SYSCALL(115, sys_ni_syscall, 0) - -/* Process Operations */ - -#define __NR_clone 116 -__SYSCALL(116, xtensa_clone, 5) -#define __NR_execve 117 -__SYSCALL(117, xtensa_execve, 3) -#define __NR_exit 118 -__SYSCALL(118, sys_exit, 1) -#define __NR_exit_group 119 -__SYSCALL(119, sys_exit_group, 1) -#define __NR_getpid 120 -__SYSCALL(120, sys_getpid, 0) -#define __NR_wait4 121 -__SYSCALL(121, sys_wait4, 4) -#define __NR_waitid 122 -__SYSCALL(122, sys_waitid, 5) -#define __NR_kill 123 -__SYSCALL(123, sys_kill, 2) -#define __NR_tkill 124 -__SYSCALL(124, sys_tkill, 2) -#define __NR_tgkill 125 -__SYSCALL(125, sys_tgkill, 3) -#define __NR_set_tid_address 126 -__SYSCALL(126, sys_set_tid_address, 1) -#define __NR_gettid 127 -__SYSCALL(127, sys_gettid, 0) -#define __NR_setsid 128 -__SYSCALL(128, sys_setsid, 0) -#define __NR_getsid 129 -__SYSCALL(129, sys_getsid, 1) -#define __NR_prctl 130 -__SYSCALL(130, sys_prctl, 5) -#define __NR_personality 131 -__SYSCALL(131, sys_personality, 1) -#define __NR_getpriority 132 -__SYSCALL(132, sys_getpriority, 2) -#define __NR_setpriority 133 -__SYSCALL(133, sys_setpriority, 3) -#define __NR_setitimer 134 -__SYSCALL(134, sys_setitimer, 3) -#define __NR_getitimer 135 -__SYSCALL(135, sys_getitimer, 2) -#define __NR_setuid 136 -__SYSCALL(136, sys_setuid, 1) -#define __NR_getuid 137 -__SYSCALL(137, sys_getuid, 0) -#define __NR_setgid 138 -__SYSCALL(138, sys_setgid, 1) -#define __NR_getgid 139 -__SYSCALL(139, sys_getgid, 0) -#define __NR_geteuid 140 -__SYSCALL(140, sys_geteuid, 0) -#define __NR_getegid 141 -__SYSCALL(141, sys_getegid, 0) -#define __NR_setreuid 142 -__SYSCALL(142, sys_setreuid, 2) -#define __NR_setregid 143 -__SYSCALL(143, sys_setregid, 2) -#define __NR_setresuid 144 -__SYSCALL(144, sys_setresuid, 3) -#define __NR_getresuid 145 -__SYSCALL(145, sys_getresuid, 3) -#define __NR_setresgid 146 -__SYSCALL(146, sys_setresgid, 3) -#define __NR_getresgid 147 -__SYSCALL(147, sys_getresgid, 3) -#define __NR_setpgid 148 -__SYSCALL(148, sys_setpgid, 2) -#define __NR_getpgid 149 -__SYSCALL(149, sys_getpgid, 1) -#define __NR_getppid 150 -__SYSCALL(150, sys_getppid, 0) -#define __NR_getpgrp 151 -__SYSCALL(151, sys_getpgrp, 0) - -#define __NR_reserved152 152 /* set_thread_area */ -__SYSCALL(152, sys_ni_syscall, 0) -#define __NR_reserved153 153 /* get_thread_area */ -__SYSCALL(153, sys_ni_syscall, 0) -#define __NR_times 154 -__SYSCALL(154, sys_times, 1) -#define __NR_acct 155 -__SYSCALL(155, sys_acct, 1) -#define __NR_sched_setaffinity 156 -__SYSCALL(156, sys_sched_setaffinity, 3) -#define __NR_sched_getaffinity 157 -__SYSCALL(157, sys_sched_getaffinity, 3) -#define __NR_capget 158 -__SYSCALL(158, sys_capget, 2) -#define __NR_capset 159 -__SYSCALL(159, sys_capset, 2) -#define __NR_ptrace 160 -__SYSCALL(160, sys_ptrace, 4) -#define __NR_semtimedop 161 -__SYSCALL(161, sys_semtimedop, 5) -#define __NR_semget 162 -__SYSCALL(162, sys_semget, 4) -#define __NR_semop 163 -__SYSCALL(163, sys_semop, 4) -#define __NR_semctl 164 -__SYSCALL(164, sys_semctl, 4) -#define __NR_available165 165 -__SYSCALL(165, sys_ni_syscall, 0) -#define __NR_msgget 166 -__SYSCALL(166, sys_msgget, 4) -#define __NR_msgsnd 167 -__SYSCALL(167, sys_msgsnd, 4) -#define __NR_msgrcv 168 -__SYSCALL(168, sys_msgrcv, 4) -#define __NR_msgctl 169 -__SYSCALL(169, sys_msgctl, 4) -#define __NR_available170 170 -__SYSCALL(170, sys_ni_syscall, 0) -#define __NR_available171 171 -__SYSCALL(171, sys_ni_syscall, 0) - -/* File System */ - -#define __NR_mount 172 -__SYSCALL(172, sys_mount, 5) -#define __NR_swapon 173 -__SYSCALL(173, sys_swapon, 2) -#define __NR_chroot 174 -__SYSCALL(174, sys_chroot, 1) -#define __NR_pivot_root 175 -__SYSCALL(175, sys_pivot_root, 2) -#define __NR_umount 176 -__SYSCALL(176, sys_umount, 2) -#define __NR_swapoff 177 -__SYSCALL(177, sys_swapoff, 1) -#define __NR_sync 178 -__SYSCALL(178, sys_sync, 0) -#define __NR_available179 179 -__SYSCALL(179, sys_ni_syscall, 0) -#define __NR_setfsuid 180 -__SYSCALL(180, sys_setfsuid, 1) -#define __NR_setfsgid 181 -__SYSCALL(181, sys_setfsgid, 1) -#define __NR_sysfs 182 -__SYSCALL(182, sys_sysfs, 3) -#define __NR_ustat 183 -__SYSCALL(183, sys_ustat, 2) -#define __NR_statfs 184 -__SYSCALL(184, sys_statfs, 2) -#define __NR_fstatfs 185 -__SYSCALL(185, sys_fstatfs, 2) -#define __NR_statfs64 186 -__SYSCALL(186, sys_statfs64, 3) -#define __NR_fstatfs64 187 -__SYSCALL(187, sys_fstatfs64, 3) - -/* System */ - -#define __NR_setrlimit 188 -__SYSCALL(188, sys_setrlimit, 2) -#define __NR_getrlimit 189 -__SYSCALL(189, sys_getrlimit, 2) -#define __NR_getrusage 190 -__SYSCALL(190, sys_getrusage, 2) -#define __NR_futex 191 -__SYSCALL(191, sys_futex, 5) -#define __NR_gettimeofday 192 -__SYSCALL(192, sys_gettimeofday, 2) -#define __NR_settimeofday 193 -__SYSCALL(193, sys_settimeofday, 2) -#define __NR_adjtimex 194 -__SYSCALL(194, sys_adjtimex, 1) -#define __NR_nanosleep 195 -__SYSCALL(195, sys_nanosleep, 2) -#define __NR_getgroups 196 -__SYSCALL(196, sys_getgroups, 2) -#define __NR_setgroups 197 -__SYSCALL(197, sys_setgroups, 2) -#define __NR_sethostname 198 -__SYSCALL(198, sys_sethostname, 2) -#define __NR_setdomainname 199 -__SYSCALL(199, sys_setdomainname, 2) -#define __NR_syslog 200 -__SYSCALL(200, sys_syslog, 3) -#define __NR_vhangup 201 -__SYSCALL(201, sys_vhangup, 0) -#define __NR_uselib 202 -__SYSCALL(202, sys_uselib, 1) -#define __NR_reboot 203 -__SYSCALL(203, sys_reboot, 3) -#define __NR_quotactl 204 -__SYSCALL(204, sys_quotactl, 4) -#define __NR_nfsservctl 205 -__SYSCALL(205, sys_ni_syscall, 0) -#define __NR__sysctl 206 -__SYSCALL(206, sys_sysctl, 1) -#define __NR_bdflush 207 -__SYSCALL(207, sys_bdflush, 2) -#define __NR_uname 208 -__SYSCALL(208, sys_newuname, 1) -#define __NR_sysinfo 209 -__SYSCALL(209, sys_sysinfo, 1) -#define __NR_init_module 210 -__SYSCALL(210, sys_init_module, 2) -#define __NR_delete_module 211 -__SYSCALL(211, sys_delete_module, 1) - -#define __NR_sched_setparam 212 -__SYSCALL(212, sys_sched_setparam, 2) -#define __NR_sched_getparam 213 -__SYSCALL(213, sys_sched_getparam, 2) -#define __NR_sched_setscheduler 214 -__SYSCALL(214, sys_sched_setscheduler, 3) -#define __NR_sched_getscheduler 215 -__SYSCALL(215, sys_sched_getscheduler, 1) -#define __NR_sched_get_priority_max 216 -__SYSCALL(216, sys_sched_get_priority_max, 1) -#define __NR_sched_get_priority_min 217 -__SYSCALL(217, sys_sched_get_priority_min, 1) -#define __NR_sched_rr_get_interval 218 -__SYSCALL(218, sys_sched_rr_get_interval, 2) -#define __NR_sched_yield 219 -__SYSCALL(219, sys_sched_yield, 0) -#define __NR_available222 222 -__SYSCALL(222, sys_ni_syscall, 0) - -/* Signal Handling */ - -#define __NR_restart_syscall 223 -__SYSCALL(223, sys_restart_syscall, 0) -#define __NR_sigaltstack 224 -__SYSCALL(224, xtensa_sigaltstack, 2) -#define __NR_rt_sigreturn 225 -__SYSCALL(225, xtensa_rt_sigreturn, 1) -#define __NR_rt_sigaction 226 -__SYSCALL(226, sys_rt_sigaction, 4) -#define __NR_rt_sigprocmask 227 -__SYSCALL(227, sys_rt_sigprocmask, 4) -#define __NR_rt_sigpending 228 -__SYSCALL(228, sys_rt_sigpending, 2) -#define __NR_rt_sigtimedwait 229 -__SYSCALL(229, sys_rt_sigtimedwait, 4) -#define __NR_rt_sigqueueinfo 230 -__SYSCALL(230, sys_rt_sigqueueinfo, 3) -#define __NR_rt_sigsuspend 231 -__SYSCALL(231, sys_rt_sigsuspend, 2) - -/* Message */ - -#define __NR_mq_open 232 -__SYSCALL(232, sys_mq_open, 4) -#define __NR_mq_unlink 233 -__SYSCALL(233, sys_mq_unlink, 1) -#define __NR_mq_timedsend 234 -__SYSCALL(234, sys_mq_timedsend, 5) -#define __NR_mq_timedreceive 235 -__SYSCALL(235, sys_mq_timedreceive, 5) -#define __NR_mq_notify 236 -__SYSCALL(236, sys_mq_notify, 2) -#define __NR_mq_getsetattr 237 -__SYSCALL(237, sys_mq_getsetattr, 3) -#define __NR_available238 238 -__SYSCALL(238, sys_ni_syscall, 0) - -/* IO */ - -#define __NR_io_setup 239 -__SYSCALL(239, sys_io_setup, 2) -#define __NR_io_destroy 240 -__SYSCALL(240, sys_io_destroy, 1) -#define __NR_io_submit 241 -__SYSCALL(241, sys_io_submit, 3) -#define __NR_io_getevents 242 -__SYSCALL(242, sys_io_getevents, 5) -#define __NR_io_cancel 243 -__SYSCALL(243, sys_io_cancel, 3) -#define __NR_clock_settime 244 -__SYSCALL(244, sys_clock_settime, 2) -#define __NR_clock_gettime 245 -__SYSCALL(245, sys_clock_gettime, 2) -#define __NR_clock_getres 246 -__SYSCALL(246, sys_clock_getres, 2) -#define __NR_clock_nanosleep 247 -__SYSCALL(247, sys_clock_nanosleep, 4) - -/* Timer */ - -#define __NR_timer_create 248 -__SYSCALL(248, sys_timer_create, 3) -#define __NR_timer_delete 249 -__SYSCALL(249, sys_timer_delete, 1) -#define __NR_timer_settime 250 -__SYSCALL(250, sys_timer_settime, 4) -#define __NR_timer_gettime 251 -__SYSCALL(251, sys_timer_gettime, 2) -#define __NR_timer_getoverrun 252 -__SYSCALL(252, sys_timer_getoverrun, 1) - -/* System */ - -#define __NR_reserved244 253 -__SYSCALL(253, sys_ni_syscall, 0) -#define __NR_lookup_dcookie 254 -__SYSCALL(254, sys_lookup_dcookie, 4) -#define __NR_available255 255 -__SYSCALL(255, sys_ni_syscall, 0) -#define __NR_add_key 256 -__SYSCALL(256, sys_add_key, 5) -#define __NR_request_key 257 -__SYSCALL(257, sys_request_key, 5) -#define __NR_keyctl 258 -__SYSCALL(258, sys_keyctl, 5) -#define __NR_available259 259 -__SYSCALL(259, sys_ni_syscall, 0) - - -#define __NR_readahead 260 -__SYSCALL(260, sys_readahead, 5) -#define __NR_remap_file_pages 261 -__SYSCALL(261, sys_remap_file_pages, 5) -#define __NR_migrate_pages 262 -__SYSCALL(262, sys_migrate_pages, 0) -#define __NR_mbind 263 -__SYSCALL(263, sys_mbind, 6) -#define __NR_get_mempolicy 264 -__SYSCALL(264, sys_get_mempolicy, 5) -#define __NR_set_mempolicy 265 -__SYSCALL(265, sys_set_mempolicy, 3) -#define __NR_unshare 266 -__SYSCALL(266, sys_unshare, 1) -#define __NR_move_pages 267 -__SYSCALL(267, sys_move_pages, 0) -#define __NR_splice 268 -__SYSCALL(268, sys_splice, 0) -#define __NR_tee 269 -__SYSCALL(269, sys_tee, 0) -#define __NR_vmsplice 270 -__SYSCALL(270, sys_vmsplice, 0) -#define __NR_available271 271 -__SYSCALL(271, sys_ni_syscall, 0) - -#define __NR_pselect6 272 -__SYSCALL(272, sys_pselect6, 0) -#define __NR_ppoll 273 -__SYSCALL(273, sys_ppoll, 0) -#define __NR_epoll_pwait 274 -__SYSCALL(274, sys_epoll_pwait, 0) -#define __NR_available275 275 -__SYSCALL(275, sys_ni_syscall, 0) - -#define __NR_inotify_init 276 -__SYSCALL(276, sys_inotify_init, 0) -#define __NR_inotify_add_watch 277 -__SYSCALL(277, sys_inotify_add_watch, 3) -#define __NR_inotify_rm_watch 278 -__SYSCALL(278, sys_inotify_rm_watch, 2) -#define __NR_available279 279 -__SYSCALL(279, sys_ni_syscall, 0) - -#define __NR_getcpu 280 -__SYSCALL(280, sys_getcpu, 0) -#define __NR_kexec_load 281 -__SYSCALL(281, sys_ni_syscall, 0) - -#define __NR_ioprio_set 282 -__SYSCALL(282, sys_ioprio_set, 2) -#define __NR_ioprio_get 283 -__SYSCALL(283, sys_ioprio_get, 3) - -#define __NR_set_robust_list 284 -__SYSCALL(284, sys_set_robust_list, 3) -#define __NR_get_robust_list 285 -__SYSCALL(285, sys_get_robust_list, 3) -#define __NR_reserved286 286 /* sync_file_rangeX */ -__SYSCALL(286, sys_ni_syscall, 3) -#define __NR_available287 287 -__SYSCALL(287, sys_faccessat, 0) - -/* Relative File Operations */ - -#define __NR_openat 288 -__SYSCALL(288, sys_openat, 4) -#define __NR_mkdirat 289 -__SYSCALL(289, sys_mkdirat, 3) -#define __NR_mknodat 290 -__SYSCALL(290, sys_mknodat, 4) -#define __NR_unlinkat 291 -__SYSCALL(291, sys_unlinkat, 3) -#define __NR_renameat 292 -__SYSCALL(292, sys_renameat, 4) -#define __NR_linkat 293 -__SYSCALL(293, sys_linkat, 5) -#define __NR_symlinkat 294 -__SYSCALL(294, sys_symlinkat, 3) -#define __NR_readlinkat 295 -__SYSCALL(295, sys_readlinkat, 4) -#define __NR_utimensat 296 -__SYSCALL(296, sys_utimensat, 0) -#define __NR_fchownat 297 -__SYSCALL(297, sys_fchownat, 5) -#define __NR_futimesat 298 -__SYSCALL(298, sys_futimesat, 4) -#define __NR_fstatat64 299 -__SYSCALL(299, sys_fstatat64, 0) -#define __NR_fchmodat 300 -__SYSCALL(300, sys_fchmodat, 4) -#define __NR_faccessat 301 -__SYSCALL(301, sys_faccessat, 4) -#define __NR_available302 302 -__SYSCALL(302, sys_ni_syscall, 0) -#define __NR_available303 303 -__SYSCALL(303, sys_ni_syscall, 0) - -#define __NR_signalfd 304 -__SYSCALL(304, sys_signalfd, 3) -/* 305 was __NR_timerfd */ -__SYSCALL(305, sys_ni_syscall, 0) -#define __NR_eventfd 306 -__SYSCALL(306, sys_eventfd, 1) -#define __NR_recvmmsg 307 -__SYSCALL(307, sys_recvmmsg, 5) -#define __NR_setns 308 -__SYSCALL(308, sys_setns, 2) - -#define __NR_syscall_count 309 - -/* - * sysxtensa syscall handler - * - * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); - * a2 a6 a3 a4 a5 - */ - -#define SYS_XTENSA_RESERVED 0 /* don't use this */ -#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */ -#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ -#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */ -#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ - -#define SYS_XTENSA_COUNT 5 /* count */ - -#ifdef __KERNEL__ /* * "Conditional" syscalls @@ -734,6 +37,3 @@ __SYSCALL(308, sys_setns, 2) #define __IGNORE_mmap /* use mmap2 */ #define __IGNORE_vfork /* use clone */ #define __IGNORE_fadvise64 /* use fadvise64_64 */ - -#endif /* __KERNEL__ */ -#endif /* _XTENSA_UNISTD_H */ diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild index baebb3d..040178c 100644 --- a/arch/xtensa/include/uapi/asm/Kbuild +++ b/arch/xtensa/include/uapi/asm/Kbuild @@ -1,3 +1,34 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += auxvec.h +header-y += bitsperlong.h +header-y += byteorder.h +header-y += errno.h +header-y += fcntl.h +header-y += ioctl.h +header-y += ioctls.h +header-y += ipcbuf.h +header-y += kvm_para.h +header-y += mman.h +header-y += msgbuf.h +header-y += param.h +header-y += poll.h +header-y += posix_types.h +header-y += ptrace.h +header-y += resource.h +header-y += sembuf.h +header-y += setup.h +header-y += shmbuf.h +header-y += sigcontext.h +header-y += siginfo.h +header-y += signal.h +header-y += socket.h +header-y += sockios.h +header-y += stat.h +header-y += statfs.h +header-y += swab.h +header-y += termbits.h +header-y += termios.h +header-y += types.h +header-y += unistd.h diff --git a/arch/xtensa/include/uapi/asm/auxvec.h b/arch/xtensa/include/uapi/asm/auxvec.h new file mode 100644 index 0000000..257dec7 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __XTENSA_AUXVEC_H +#define __XTENSA_AUXVEC_H + +#endif diff --git a/arch/xtensa/include/uapi/asm/bitsperlong.h b/arch/xtensa/include/uapi/asm/bitsperlong.h new file mode 100644 index 0000000..6dc0bb0 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/bitsperlong.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/uapi/asm/byteorder.h b/arch/xtensa/include/uapi/asm/byteorder.h new file mode 100644 index 0000000..54eb631 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/byteorder.h @@ -0,0 +1,12 @@ +#ifndef _XTENSA_BYTEORDER_H +#define _XTENSA_BYTEORDER_H + +#ifdef __XTENSA_EL__ +#include +#elif defined(__XTENSA_EB__) +#include +#else +# error processor byte order undefined! +#endif + +#endif /* _XTENSA_BYTEORDER_H */ diff --git a/arch/xtensa/include/uapi/asm/errno.h b/arch/xtensa/include/uapi/asm/errno.h new file mode 100644 index 0000000..a0f3b96 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/errno.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/errno.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_ERRNO_H +#define _XTENSA_ERRNO_H + +#include + +#endif /* _XTENSA_ERRNO_H */ diff --git a/arch/xtensa/include/uapi/asm/fcntl.h b/arch/xtensa/include/uapi/asm/fcntl.h new file mode 100644 index 0000000..46ab12d --- /dev/null +++ b/arch/xtensa/include/uapi/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/uapi/asm/ioctl.h b/arch/xtensa/include/uapi/asm/ioctl.h new file mode 100644 index 0000000..b279fe0 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h new file mode 100644 index 0000000..2aa4cd9 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/ioctls.h @@ -0,0 +1,120 @@ +/* + * include/asm-xtensa/ioctls.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + * + * Derived from "include/asm-i386/ioctls.h" + */ + +#ifndef _XTENSA_IOCTLS_H +#define _XTENSA_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 + +#define TCGETA _IOR('t', 23, struct termio) +#define TCSETA _IOW('t', 24, struct termio) +#define TCSETAW _IOW('t', 25, struct termio) +#define TCSETAF _IOW('t', 28, struct termio) + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ _IOW('t', 103, struct winsize) +#define TIOCGWINSZ _IOR('t', 104, struct winsize) +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL _IO('T', 12) +#define TIOCNXCL _IO('T', 13) +#define TIOCSCTTY _IO('T', 14) + +#define TIOCSTI _IOW('T', 18, char) +#define TIOCMGET _IOR('T', 21, unsigned int) +#define TIOCMBIS _IOW('T', 22, unsigned int) +#define TIOCMBIC _IOW('T', 23, unsigned int) +#define TIOCMSET _IOW('T', 24, unsigned int) +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG + +#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) +#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) +#define TIOCLINUX _IOW('T', 28, char) +#define TIOCCONS _IO('T', 29) +#define TIOCGSERIAL 0x803C541E /*_IOR('T', 30, struct serial_struct)*/ +#define TIOCSSERIAL 0x403C541F /*_IOW('T', 31, struct serial_struct)*/ +#define TIOCPKT _IOW('T', 32, int) +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 +# define TIOCPKT_IOCTL 64 + + +#define TIOCNOTTY _IO('T', 34) +#define TIOCSETD _IOW('T', 35, int) +#define TIOCGETD _IOR('T', 36, int) +#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/ +#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/ +#define TIOCSBRK _IO('T', 39) /* BSD compatibility */ +#define TIOCCBRK _IO('T', 40) /* BSD compatibility */ +#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/ +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP _IO('T', 0x37) + +#define TIOCSERCONFIG _IO('T', 83) +#define TIOCSERGWILD _IOR('T', 84, int) +#define TIOCSERSWILD _IOW('T', 85, int) +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */ +#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */ + +#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* _XTENSA_IOCTLS_H */ diff --git a/arch/xtensa/include/uapi/asm/ipcbuf.h b/arch/xtensa/include/uapi/asm/ipcbuf.h new file mode 100644 index 0000000..c33aa6a --- /dev/null +++ b/arch/xtensa/include/uapi/asm/ipcbuf.h @@ -0,0 +1,37 @@ +/* + * include/asm-xtensa/ipcbuf.h + * + * The ipc64_perm structure for the Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_IPCBUF_H +#define _XTENSA_IPCBUF_H + +/* + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned long seq; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _XTENSA_IPCBUF_H */ diff --git a/arch/xtensa/include/uapi/asm/kvm_para.h b/arch/xtensa/include/uapi/asm/kvm_para.h new file mode 100644 index 0000000..14fab8f --- /dev/null +++ b/arch/xtensa/include/uapi/asm/kvm_para.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h new file mode 100644 index 0000000..25bc6c1 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/mman.h @@ -0,0 +1,96 @@ +/* + * include/asm-xtensa/mman.h + * + * Xtensa Processor memory-manager definitions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_MMAN_H +#define _XTENSA_MMAN_H + +/* + * Protections are chosen from these bits, OR'd together. The + * implementation does not necessarily support PROT_EXEC or PROT_WRITE + * without PROT_READ. The only guarantees are that no writing will be + * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. + */ + +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ + +#define PROT_SEM 0x10 /* page may be used for atomic ops */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end fo growsup vma */ + +/* + * Flags for mmap + */ +#define MAP_SHARED 0x001 /* Share changes */ +#define MAP_PRIVATE 0x002 /* Changes are private */ +#define MAP_TYPE 0x00f /* Mask for type of mapping */ +#define MAP_FIXED 0x010 /* Interpret addr exactly */ + +/* not used by linux, but here to make sure we don't clash with ABI defines */ +#define MAP_RENAME 0x020 /* Assign page to file */ +#define MAP_AUTOGROW 0x040 /* File may grow by writing */ +#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ +#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ + +/* These are linux-specific */ +#define MAP_NORESERVE 0x0400 /* don't check for reservations */ +#define MAP_ANONYMOUS 0x0800 /* don't use a file */ +#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ +#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ +#define MAP_LOCKED 0x8000 /* pages are locked */ +#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x20000 /* do not block on IO */ +#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ +#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ + +/* + * Flags for msync + */ +#define MS_ASYNC 0x0001 /* sync memory asynchronously */ +#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ +#define MS_SYNC 0x0004 /* synchronous memory sync */ + +/* + * Flags for mlockall + */ +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0 /* no further special treatment */ +#define MADV_RANDOM 1 /* expect random page references */ +#define MADV_SEQUENTIAL 2 /* expect sequential page references */ +#define MADV_WILLNEED 3 /* will need these pages */ +#define MADV_DONTNEED 4 /* don't need these pages */ + +/* common parameters: try to keep these consistent across architectures */ +#define MADV_REMOVE 9 /* remove these pages & resources */ +#define MADV_DONTFORK 10 /* don't inherit across fork */ +#define MADV_DOFORK 11 /* do inherit across fork */ + +#define MADV_MERGEABLE 12 /* KSM may merge identical pages */ +#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */ + +#define MADV_HUGEPAGE 14 /* Worth backing with hugepages */ +#define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */ + +#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump, + overrides the coredump filter bits */ +#define MADV_DODUMP 17 /* Clear the MADV_NODUMP flag */ + +/* compatibility flags */ +#define MAP_FILE 0 + +#endif /* _XTENSA_MMAN_H */ diff --git a/arch/xtensa/include/uapi/asm/msgbuf.h b/arch/xtensa/include/uapi/asm/msgbuf.h new file mode 100644 index 0000000..693c967 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/msgbuf.h @@ -0,0 +1,48 @@ +/* + * include/asm-xtensa/msgbuf.h + * + * The msqid64_ds structure for the Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef _XTENSA_MSGBUF_H +#define _XTENSA_MSGBUF_H + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#ifdef __XTENSA_EB__ + unsigned int __unused1; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned int __unused2; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned int __unused3; + __kernel_time_t msg_ctime; /* last change time */ +#elif defined(__XTENSA_EL__) + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned int __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned int __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned int __unused3; +#else +# error processor byte order undefined! +#endif + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _XTENSA_MSGBUF_H */ diff --git a/arch/xtensa/include/uapi/asm/param.h b/arch/xtensa/include/uapi/asm/param.h new file mode 100644 index 0000000..87bc2ea --- /dev/null +++ b/arch/xtensa/include/uapi/asm/param.h @@ -0,0 +1,30 @@ +/* + * include/asm-xtensa/param.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_PARAM_H +#define _UAPI_XTENSA_PARAM_H + +#ifndef __KERNEL__ +# define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NGROUPS +#define NGROUPS 32 +#endif + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _UAPI_XTENSA_PARAM_H */ diff --git a/arch/xtensa/include/uapi/asm/poll.h b/arch/xtensa/include/uapi/asm/poll.h new file mode 100644 index 0000000..9d2d599 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/poll.h @@ -0,0 +1,20 @@ +/* + * include/asm-xtensa/poll.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_POLL_H +#define _XTENSA_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 0x0100 +#define POLLREMOVE 0x0800 + +#include + +#endif /* _XTENSA_POLL_H */ diff --git a/arch/xtensa/include/uapi/asm/posix_types.h b/arch/xtensa/include/uapi/asm/posix_types.h new file mode 100644 index 0000000..6e96be0 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/posix_types.h @@ -0,0 +1,39 @@ +/* + * include/asm-xtensa/posix_types.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Largely copied from include/asm-ppc/posix_types.h + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_POSIX_TYPES_H +#define _XTENSA_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +#define __kernel_size_t __kernel_size_t + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +#define __kernel_old_uid_t __kernel_old_uid_t + +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t + +#include + +#endif /* _XTENSA_POSIX_TYPES_H */ diff --git a/arch/xtensa/include/uapi/asm/ptrace.h b/arch/xtensa/include/uapi/asm/ptrace.h new file mode 100644 index 0000000..ee17aa8 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/ptrace.h @@ -0,0 +1,77 @@ +/* + * include/asm-xtensa/ptrace.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_PTRACE_H +#define _UAPI_XTENSA_PTRACE_H + +/* + * Kernel stack + * + * +-----------------------+ -------- STACK_SIZE + * | register file | | + * +-----------------------+ | + * | struct pt_regs | | + * +-----------------------+ | ------ PT_REGS_OFFSET + * double : 16 bytes spill area : | ^ + * excetion :- - - - - - - - - - - -: | | + * frame : struct pt_regs : | | + * :- - - - - - - - - - - -: | | + * | | | | + * | memory stack | | | + * | | | | + * ~ ~ ~ ~ + * ~ ~ ~ ~ + * | | | | + * | | | | + * +-----------------------+ | | --- STACK_BIAS + * | struct task_struct | | | ^ + * current --> +-----------------------+ | | | + * | struct thread_info | | | | + * +-----------------------+ -------- + */ + +#define KERNEL_STACK_SIZE (2 * PAGE_SIZE) + +/* Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */ + +#define EXC_TABLE_KSTK 0x004 /* Kernel Stack */ +#define EXC_TABLE_DOUBLE_SAVE 0x008 /* Double exception save area for a0 */ +#define EXC_TABLE_FIXUP 0x00c /* Fixup handler */ +#define EXC_TABLE_PARAM 0x010 /* For passing a parameter to fixup */ +#define EXC_TABLE_SYSCALL_SAVE 0x014 /* For fast syscall handler */ +#define EXC_TABLE_FAST_USER 0x100 /* Fast user exception handler */ +#define EXC_TABLE_FAST_KERNEL 0x200 /* Fast kernel exception handler */ +#define EXC_TABLE_DEFAULT 0x300 /* Default C-Handler */ +#define EXC_TABLE_SIZE 0x400 + +/* Registers used by strace */ + +#define REG_A_BASE 0x0000 +#define REG_AR_BASE 0x0100 +#define REG_PC 0x0020 +#define REG_PS 0x02e6 +#define REG_WB 0x0248 +#define REG_WS 0x0249 +#define REG_LBEG 0x0200 +#define REG_LEND 0x0201 +#define REG_LCOUNT 0x0202 +#define REG_SAR 0x0203 + +#define SYSCALL_NR 0x00ff + +/* Other PTRACE_ values defined in using values 0-9,16,17,24 */ + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETXTREGS 18 +#define PTRACE_SETXTREGS 19 + + +#endif /* _UAPI_XTENSA_PTRACE_H */ diff --git a/arch/xtensa/include/uapi/asm/resource.h b/arch/xtensa/include/uapi/asm/resource.h new file mode 100644 index 0000000..17b5ab3 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/resource.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/resource.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_RESOURCE_H +#define _XTENSA_RESOURCE_H + +#include + +#endif /* _XTENSA_RESOURCE_H */ diff --git a/arch/xtensa/include/uapi/asm/sembuf.h b/arch/xtensa/include/uapi/asm/sembuf.h new file mode 100644 index 0000000..c158704 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/sembuf.h @@ -0,0 +1,44 @@ +/* + * include/asm-xtensa/sembuf.h + * + * The semid64_ds structure for Xtensa architecture. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + */ + +#ifndef _XTENSA_SEMBUF_H +#define _XTENSA_SEMBUF_H + +#include + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ +#ifdef __XTENSA_EL__ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; +#else + unsigned long __unused1; + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused2; + __kernel_time_t sem_ctime; /* last change time */ +#endif + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_XTENSA_SEMBUF_H */ diff --git a/arch/xtensa/include/uapi/asm/setup.h b/arch/xtensa/include/uapi/asm/setup.h new file mode 100644 index 0000000..9fa8ad9 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/setup.h @@ -0,0 +1,18 @@ +/* + * include/asm-xtensa/setup.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SETUP_H +#define _XTENSA_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +extern void set_except_vector(int n, void *addr); + +#endif diff --git a/arch/xtensa/include/uapi/asm/shmbuf.h b/arch/xtensa/include/uapi/asm/shmbuf.h new file mode 100644 index 0000000..ad4b012 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/shmbuf.h @@ -0,0 +1,71 @@ +/* + * include/asm-xtensa/shmbuf.h + * + * The shmid64_ds structure for Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SHMBUF_H +#define _XTENSA_SHMBUF_H + +#if defined (__XTENSA_EL__) +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; +#elif defined (__XTENSA_EB__) +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; +#else +# error endian order not defined +#endif + + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _XTENSA_SHMBUF_H */ diff --git a/arch/xtensa/include/uapi/asm/sigcontext.h b/arch/xtensa/include/uapi/asm/sigcontext.h new file mode 100644 index 0000000..03383af --- /dev/null +++ b/arch/xtensa/include/uapi/asm/sigcontext.h @@ -0,0 +1,28 @@ +/* + * include/asm-xtensa/sigcontext.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2007 Tensilica Inc. + */ + +#ifndef _XTENSA_SIGCONTEXT_H +#define _XTENSA_SIGCONTEXT_H + + +struct sigcontext { + unsigned long sc_pc; + unsigned long sc_ps; + unsigned long sc_lbeg; + unsigned long sc_lend; + unsigned long sc_lcount; + unsigned long sc_sar; + unsigned long sc_acclo; + unsigned long sc_acchi; + unsigned long sc_a[16]; + void *sc_xtregs; +}; + +#endif /* _XTENSA_SIGCONTEXT_H */ diff --git a/arch/xtensa/include/uapi/asm/siginfo.h b/arch/xtensa/include/uapi/asm/siginfo.h new file mode 100644 index 0000000..6916248 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/siginfo.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/siginfo.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SIGINFO_H +#define _XTENSA_SIGINFO_H + +#include + +#endif /* _XTENSA_SIGINFO_H */ diff --git a/arch/xtensa/include/uapi/asm/signal.h b/arch/xtensa/include/uapi/asm/signal.h new file mode 100644 index 0000000..b88ce96 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/signal.h @@ -0,0 +1,148 @@ +/* + * include/asm-xtensa/signal.h + * + * Swiped from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_SIGNAL_H +#define _UAPI_XTENSA_SIGNAL_H + + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +#ifndef __ASSEMBLY__ + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; +typedef unsigned long old_sigset_t; /* at least 32 bits */ +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#endif + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* #define SIGLOST 29 */ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#ifndef __ASSEMBLY__ + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +/* Type of a signal handler. */ +typedef void (*__sighandler_t)(int); + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +#ifndef __KERNEL__ + +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#endif /* __ASSEMBLY__ */ +#endif /* _UAPI_XTENSA_SIGNAL_H */ diff --git a/arch/xtensa/include/uapi/asm/socket.h b/arch/xtensa/include/uapi/asm/socket.h new file mode 100644 index 0000000..e36c681 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/socket.h @@ -0,0 +1,83 @@ +/* + * include/asm-xtensa/socket.h + * + * Copied from i386. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _XTENSA_SOCKET_H +#define _XTENSA_SOCKET_H + +#include + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ + +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ + +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#define SO_PROTOCOL 38 +#define SO_DOMAIN 39 + +#define SO_RXQ_OVFL 40 + +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 42 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 43 + +#endif /* _XTENSA_SOCKET_H */ diff --git a/arch/xtensa/include/uapi/asm/sockios.h b/arch/xtensa/include/uapi/asm/sockios.h new file mode 100644 index 0000000..efe0af3 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/sockios.h @@ -0,0 +1,31 @@ +/* + * include/asm-xtensa/sockios.h + * + * Socket-level I/O control calls. Copied from MIPS. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + * Copyright (C) 2001 Tensilica Inc. + */ + +#ifndef _XTENSA_SOCKIOS_H +#define _XTENSA_SOCKIOS_H + +#include + +/* Socket-level I/O control calls. */ + +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _XTENSA_SOCKIOS_H */ diff --git a/arch/xtensa/include/uapi/asm/stat.h b/arch/xtensa/include/uapi/asm/stat.h new file mode 100644 index 0000000..c499203 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/stat.h @@ -0,0 +1,59 @@ +/* + * include/asm-xtensa/stat.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2007 Tensilica Inc. + */ + +#ifndef _XTENSA_STAT_H +#define _XTENSA_STAT_H + +#define STAT_HAVE_NSEC 1 + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + unsigned int st_uid; + unsigned int st_gid; + unsigned long st_rdev; + long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +struct stat64 { + unsigned long long st_dev; /* Device */ + unsigned long long st_ino; /* File serial number */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long long st_rdev; /* Device number, if device. */ + long long st_size; /* Size of file, in bytes. */ + unsigned long st_blksize; /* Optimal block size for I/O. */ + unsigned long __unused2; + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long st_atime; /* Time of last access. */ + unsigned long st_atime_nsec; + unsigned long st_mtime; /* Time of last modification. */ + unsigned long st_mtime_nsec; + unsigned long st_ctime; /* Time of last status change. */ + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _XTENSA_STAT_H */ diff --git a/arch/xtensa/include/uapi/asm/statfs.h b/arch/xtensa/include/uapi/asm/statfs.h new file mode 100644 index 0000000..9c3d1a2 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/statfs.h @@ -0,0 +1,17 @@ +/* + * include/asm-xtensa/statfs.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_STATFS_H +#define _XTENSA_STATFS_H + +#include + +#endif /* _XTENSA_STATFS_H */ + diff --git a/arch/xtensa/include/uapi/asm/swab.h b/arch/xtensa/include/uapi/asm/swab.h new file mode 100644 index 0000000..226a391 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/swab.h @@ -0,0 +1,70 @@ +/* + * include/asm-xtensa/swab.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SWAB_H +#define _XTENSA_SWAB_H + +#include +#include + +#define __SWAB_64_THRU_32__ + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + __u32 res; + /* instruction sequence from Xtensa ISA release 2/2000 */ + __asm__("ssai 8 \n\t" + "srli %0, %1, 16 \n\t" + "src %0, %0, %1 \n\t" + "src %0, %0, %0 \n\t" + "src %0, %1, %0 \n" + : "=&a" (res) + : "a" (x) + ); + return res; +} +#define __arch_swab32 __arch_swab32 + +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +{ + /* Given that 'short' values are signed (i.e., can be negative), + * we cannot assume that the upper 16-bits of the register are + * zero. We are careful to mask values after shifting. + */ + + /* There exists an anomaly between xt-gcc and xt-xcc. xt-gcc + * inserts an extui instruction after putting this function inline + * to ensure that it uses only the least-significant 16 bits of + * the result. xt-xcc doesn't use an extui, but assumes the + * __asm__ macro follows convention that the upper 16 bits of an + * 'unsigned short' result are still zero. This macro doesn't + * follow convention; indeed, it leaves garbage in the upport 16 + * bits of the register. + + * Declaring the temporary variables 'res' and 'tmp' to be 32-bit + * types while the return type of the function is a 16-bit type + * forces both compilers to insert exactly one extui instruction + * (or equivalent) to mask off the upper 16 bits. */ + + __u32 res; + __u32 tmp; + + __asm__("extui %1, %2, 8, 8\n\t" + "slli %0, %2, 8 \n\t" + "or %0, %0, %1 \n" + : "=&a" (res), "=&a" (tmp) + : "a" (x) + ); + + return res; +} +#define __arch_swab16 __arch_swab16 + +#endif /* _XTENSA_SWAB_H */ diff --git a/arch/xtensa/include/uapi/asm/termbits.h b/arch/xtensa/include/uapi/asm/termbits.h new file mode 100644 index 0000000..0d6c871 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/termbits.h @@ -0,0 +1,220 @@ +/* + * include/asm-xtensa/termbits.h + * + * Copied from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_TERMBITS_H +#define _XTENSA_TERMBITS_H + + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ + +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ + +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ + +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ + +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ + +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 +#define EXTPROC 0200000 + +/* tcflow() and TCXONC use these */ + +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ + +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ + +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _XTENSA_TERMBITS_H */ diff --git a/arch/xtensa/include/uapi/asm/termios.h b/arch/xtensa/include/uapi/asm/termios.h new file mode 100644 index 0000000..32a770f --- /dev/null +++ b/arch/xtensa/include/uapi/asm/termios.h @@ -0,0 +1,56 @@ +/* + * include/asm-xtensa/termios.h + * + * Copied from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_TERMIOS_H +#define _UAPI_XTENSA_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* Modem lines */ + +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + + +#endif /* _UAPI_XTENSA_TERMIOS_H */ diff --git a/arch/xtensa/include/uapi/asm/types.h b/arch/xtensa/include/uapi/asm/types.h new file mode 100644 index 0000000..87ec7ae --- /dev/null +++ b/arch/xtensa/include/uapi/asm/types.h @@ -0,0 +1,28 @@ +/* + * include/asm-xtensa/types.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_TYPES_H +#define _UAPI_XTENSA_TYPES_H + +#include + +#ifdef __ASSEMBLY__ +# define __XTENSA_UL(x) (x) +# define __XTENSA_UL_CONST(x) x +#else +# define __XTENSA_UL(x) ((unsigned long)(x)) +# define __XTENSA_UL_CONST(x) x##UL +#endif + +#ifndef __ASSEMBLY__ + +#endif + +#endif /* _UAPI_XTENSA_TYPES_H */ diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h new file mode 100644 index 0000000..a842ed5 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -0,0 +1,704 @@ +/* + * include/asm-xtensa/unistd.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef __SYSCALL +# define __SYSCALL(nr,func,nargs) +#endif + +#define __NR_spill 0 +__SYSCALL( 0, sys_ni_syscall, 0) +#define __NR_xtensa 1 +__SYSCALL( 1, sys_ni_syscall, 0) +#define __NR_available4 2 +__SYSCALL( 2, sys_ni_syscall, 0) +#define __NR_available5 3 +__SYSCALL( 3, sys_ni_syscall, 0) +#define __NR_available6 4 +__SYSCALL( 4, sys_ni_syscall, 0) +#define __NR_available7 5 +__SYSCALL( 5, sys_ni_syscall, 0) +#define __NR_available8 6 +__SYSCALL( 6, sys_ni_syscall, 0) +#define __NR_available9 7 +__SYSCALL( 7, sys_ni_syscall, 0) + +/* File Operations */ + +#define __NR_open 8 +__SYSCALL( 8, sys_open, 3) +#define __NR_close 9 +__SYSCALL( 9, sys_close, 1) +#define __NR_dup 10 +__SYSCALL( 10, sys_dup, 1) +#define __NR_dup2 11 +__SYSCALL( 11, sys_dup2, 2) +#define __NR_read 12 +__SYSCALL( 12, sys_read, 3) +#define __NR_write 13 +__SYSCALL( 13, sys_write, 3) +#define __NR_select 14 +__SYSCALL( 14, sys_select, 5) +#define __NR_lseek 15 +__SYSCALL( 15, sys_lseek, 3) +#define __NR_poll 16 +__SYSCALL( 16, sys_poll, 3) +#define __NR__llseek 17 +__SYSCALL( 17, sys_llseek, 5) +#define __NR_epoll_wait 18 +__SYSCALL( 18, sys_epoll_wait, 4) +#define __NR_epoll_ctl 19 +__SYSCALL( 19, sys_epoll_ctl, 4) +#define __NR_epoll_create 20 +__SYSCALL( 20, sys_epoll_create, 1) +#define __NR_creat 21 +__SYSCALL( 21, sys_creat, 2) +#define __NR_truncate 22 +__SYSCALL( 22, sys_truncate, 2) +#define __NR_ftruncate 23 +__SYSCALL( 23, sys_ftruncate, 2) +#define __NR_readv 24 +__SYSCALL( 24, sys_readv, 3) +#define __NR_writev 25 +__SYSCALL( 25, sys_writev, 3) +#define __NR_fsync 26 +__SYSCALL( 26, sys_fsync, 1) +#define __NR_fdatasync 27 +__SYSCALL( 27, sys_fdatasync, 1) +#define __NR_truncate64 28 +__SYSCALL( 28, sys_truncate64, 2) +#define __NR_ftruncate64 29 +__SYSCALL( 29, sys_ftruncate64, 2) +#define __NR_pread64 30 +__SYSCALL( 30, sys_pread64, 6) +#define __NR_pwrite64 31 +__SYSCALL( 31, sys_pwrite64, 6) + +#define __NR_link 32 +__SYSCALL( 32, sys_link, 2) +#define __NR_rename 33 +__SYSCALL( 33, sys_rename, 2) +#define __NR_symlink 34 +__SYSCALL( 34, sys_symlink, 2) +#define __NR_readlink 35 +__SYSCALL( 35, sys_readlink, 3) +#define __NR_mknod 36 +__SYSCALL( 36, sys_mknod, 3) +#define __NR_pipe 37 +__SYSCALL( 37, sys_pipe, 1) +#define __NR_unlink 38 +__SYSCALL( 38, sys_unlink, 1) +#define __NR_rmdir 39 +__SYSCALL( 39, sys_rmdir, 1) + +#define __NR_mkdir 40 +__SYSCALL( 40, sys_mkdir, 2) +#define __NR_chdir 41 +__SYSCALL( 41, sys_chdir, 1) +#define __NR_fchdir 42 +__SYSCALL( 42, sys_fchdir, 1) +#define __NR_getcwd 43 +__SYSCALL( 43, sys_getcwd, 2) + +#define __NR_chmod 44 +__SYSCALL( 44, sys_chmod, 2) +#define __NR_chown 45 +__SYSCALL( 45, sys_chown, 3) +#define __NR_stat 46 +__SYSCALL( 46, sys_newstat, 2) +#define __NR_stat64 47 +__SYSCALL( 47, sys_stat64, 2) + +#define __NR_lchown 48 +__SYSCALL( 48, sys_lchown, 3) +#define __NR_lstat 49 +__SYSCALL( 49, sys_newlstat, 2) +#define __NR_lstat64 50 +__SYSCALL( 50, sys_lstat64, 2) +#define __NR_available51 51 +__SYSCALL( 51, sys_ni_syscall, 0) + +#define __NR_fchmod 52 +__SYSCALL( 52, sys_fchmod, 2) +#define __NR_fchown 53 +__SYSCALL( 53, sys_fchown, 3) +#define __NR_fstat 54 +__SYSCALL( 54, sys_newfstat, 2) +#define __NR_fstat64 55 +__SYSCALL( 55, sys_fstat64, 2) + +#define __NR_flock 56 +__SYSCALL( 56, sys_flock, 2) +#define __NR_access 57 +__SYSCALL( 57, sys_access, 2) +#define __NR_umask 58 +__SYSCALL( 58, sys_umask, 1) +#define __NR_getdents 59 +__SYSCALL( 59, sys_getdents, 3) +#define __NR_getdents64 60 +__SYSCALL( 60, sys_getdents64, 3) +#define __NR_fcntl64 61 +__SYSCALL( 61, sys_fcntl64, 3) +#define __NR_available62 62 +__SYSCALL( 62, sys_ni_syscall, 0) +#define __NR_fadvise64_64 63 +__SYSCALL( 63, xtensa_fadvise64_64, 6) +#define __NR_utime 64 /* glibc 2.3.3 ?? */ +__SYSCALL( 64, sys_utime, 2) +#define __NR_utimes 65 +__SYSCALL( 65, sys_utimes, 2) +#define __NR_ioctl 66 +__SYSCALL( 66, sys_ioctl, 3) +#define __NR_fcntl 67 +__SYSCALL( 67, sys_fcntl, 3) + +#define __NR_setxattr 68 +__SYSCALL( 68, sys_setxattr, 5) +#define __NR_getxattr 69 +__SYSCALL( 69, sys_getxattr, 4) +#define __NR_listxattr 70 +__SYSCALL( 70, sys_listxattr, 3) +#define __NR_removexattr 71 +__SYSCALL( 71, sys_removexattr, 2) +#define __NR_lsetxattr 72 +__SYSCALL( 72, sys_lsetxattr, 5) +#define __NR_lgetxattr 73 +__SYSCALL( 73, sys_lgetxattr, 4) +#define __NR_llistxattr 74 +__SYSCALL( 74, sys_llistxattr, 3) +#define __NR_lremovexattr 75 +__SYSCALL( 75, sys_lremovexattr, 2) +#define __NR_fsetxattr 76 +__SYSCALL( 76, sys_fsetxattr, 5) +#define __NR_fgetxattr 77 +__SYSCALL( 77, sys_fgetxattr, 4) +#define __NR_flistxattr 78 +__SYSCALL( 78, sys_flistxattr, 3) +#define __NR_fremovexattr 79 +__SYSCALL( 79, sys_fremovexattr, 2) + +/* File Map / Shared Memory Operations */ + +#define __NR_mmap2 80 +__SYSCALL( 80, sys_mmap_pgoff, 6) +#define __NR_munmap 81 +__SYSCALL( 81, sys_munmap, 2) +#define __NR_mprotect 82 +__SYSCALL( 82, sys_mprotect, 3) +#define __NR_brk 83 +__SYSCALL( 83, sys_brk, 1) +#define __NR_mlock 84 +__SYSCALL( 84, sys_mlock, 2) +#define __NR_munlock 85 +__SYSCALL( 85, sys_munlock, 2) +#define __NR_mlockall 86 +__SYSCALL( 86, sys_mlockall, 1) +#define __NR_munlockall 87 +__SYSCALL( 87, sys_munlockall, 0) +#define __NR_mremap 88 +__SYSCALL( 88, sys_mremap, 4) +#define __NR_msync 89 +__SYSCALL( 89, sys_msync, 3) +#define __NR_mincore 90 +__SYSCALL( 90, sys_mincore, 3) +#define __NR_madvise 91 +__SYSCALL( 91, sys_madvise, 3) +#define __NR_shmget 92 +__SYSCALL( 92, sys_shmget, 4) +#define __NR_shmat 93 +__SYSCALL( 93, xtensa_shmat, 4) +#define __NR_shmctl 94 +__SYSCALL( 94, sys_shmctl, 4) +#define __NR_shmdt 95 +__SYSCALL( 95, sys_shmdt, 4) + +/* Socket Operations */ + +#define __NR_socket 96 +__SYSCALL( 96, sys_socket, 3) +#define __NR_setsockopt 97 +__SYSCALL( 97, sys_setsockopt, 5) +#define __NR_getsockopt 98 +__SYSCALL( 98, sys_getsockopt, 5) +#define __NR_shutdown 99 +__SYSCALL( 99, sys_shutdown, 2) + +#define __NR_bind 100 +__SYSCALL(100, sys_bind, 3) +#define __NR_connect 101 +__SYSCALL(101, sys_connect, 3) +#define __NR_listen 102 +__SYSCALL(102, sys_listen, 2) +#define __NR_accept 103 +__SYSCALL(103, sys_accept, 3) + +#define __NR_getsockname 104 +__SYSCALL(104, sys_getsockname, 3) +#define __NR_getpeername 105 +__SYSCALL(105, sys_getpeername, 3) +#define __NR_sendmsg 106 +__SYSCALL(106, sys_sendmsg, 3) +#define __NR_recvmsg 107 +__SYSCALL(107, sys_recvmsg, 3) +#define __NR_send 108 +__SYSCALL(108, sys_send, 4) +#define __NR_recv 109 +__SYSCALL(109, sys_recv, 4) +#define __NR_sendto 110 +__SYSCALL(110, sys_sendto, 6) +#define __NR_recvfrom 111 +__SYSCALL(111, sys_recvfrom, 6) + +#define __NR_socketpair 112 +__SYSCALL(112, sys_socketpair, 4) +#define __NR_sendfile 113 +__SYSCALL(113, sys_sendfile, 4) +#define __NR_sendfile64 114 +__SYSCALL(114, sys_sendfile64, 4) +#define __NR_available115 115 +__SYSCALL(115, sys_ni_syscall, 0) + +/* Process Operations */ + +#define __NR_clone 116 +__SYSCALL(116, xtensa_clone, 5) +#define __NR_execve 117 +__SYSCALL(117, xtensa_execve, 3) +#define __NR_exit 118 +__SYSCALL(118, sys_exit, 1) +#define __NR_exit_group 119 +__SYSCALL(119, sys_exit_group, 1) +#define __NR_getpid 120 +__SYSCALL(120, sys_getpid, 0) +#define __NR_wait4 121 +__SYSCALL(121, sys_wait4, 4) +#define __NR_waitid 122 +__SYSCALL(122, sys_waitid, 5) +#define __NR_kill 123 +__SYSCALL(123, sys_kill, 2) +#define __NR_tkill 124 +__SYSCALL(124, sys_tkill, 2) +#define __NR_tgkill 125 +__SYSCALL(125, sys_tgkill, 3) +#define __NR_set_tid_address 126 +__SYSCALL(126, sys_set_tid_address, 1) +#define __NR_gettid 127 +__SYSCALL(127, sys_gettid, 0) +#define __NR_setsid 128 +__SYSCALL(128, sys_setsid, 0) +#define __NR_getsid 129 +__SYSCALL(129, sys_getsid, 1) +#define __NR_prctl 130 +__SYSCALL(130, sys_prctl, 5) +#define __NR_personality 131 +__SYSCALL(131, sys_personality, 1) +#define __NR_getpriority 132 +__SYSCALL(132, sys_getpriority, 2) +#define __NR_setpriority 133 +__SYSCALL(133, sys_setpriority, 3) +#define __NR_setitimer 134 +__SYSCALL(134, sys_setitimer, 3) +#define __NR_getitimer 135 +__SYSCALL(135, sys_getitimer, 2) +#define __NR_setuid 136 +__SYSCALL(136, sys_setuid, 1) +#define __NR_getuid 137 +__SYSCALL(137, sys_getuid, 0) +#define __NR_setgid 138 +__SYSCALL(138, sys_setgid, 1) +#define __NR_getgid 139 +__SYSCALL(139, sys_getgid, 0) +#define __NR_geteuid 140 +__SYSCALL(140, sys_geteuid, 0) +#define __NR_getegid 141 +__SYSCALL(141, sys_getegid, 0) +#define __NR_setreuid 142 +__SYSCALL(142, sys_setreuid, 2) +#define __NR_setregid 143 +__SYSCALL(143, sys_setregid, 2) +#define __NR_setresuid 144 +__SYSCALL(144, sys_setresuid, 3) +#define __NR_getresuid 145 +__SYSCALL(145, sys_getresuid, 3) +#define __NR_setresgid 146 +__SYSCALL(146, sys_setresgid, 3) +#define __NR_getresgid 147 +__SYSCALL(147, sys_getresgid, 3) +#define __NR_setpgid 148 +__SYSCALL(148, sys_setpgid, 2) +#define __NR_getpgid 149 +__SYSCALL(149, sys_getpgid, 1) +#define __NR_getppid 150 +__SYSCALL(150, sys_getppid, 0) +#define __NR_getpgrp 151 +__SYSCALL(151, sys_getpgrp, 0) + +#define __NR_reserved152 152 /* set_thread_area */ +__SYSCALL(152, sys_ni_syscall, 0) +#define __NR_reserved153 153 /* get_thread_area */ +__SYSCALL(153, sys_ni_syscall, 0) +#define __NR_times 154 +__SYSCALL(154, sys_times, 1) +#define __NR_acct 155 +__SYSCALL(155, sys_acct, 1) +#define __NR_sched_setaffinity 156 +__SYSCALL(156, sys_sched_setaffinity, 3) +#define __NR_sched_getaffinity 157 +__SYSCALL(157, sys_sched_getaffinity, 3) +#define __NR_capget 158 +__SYSCALL(158, sys_capget, 2) +#define __NR_capset 159 +__SYSCALL(159, sys_capset, 2) +#define __NR_ptrace 160 +__SYSCALL(160, sys_ptrace, 4) +#define __NR_semtimedop 161 +__SYSCALL(161, sys_semtimedop, 5) +#define __NR_semget 162 +__SYSCALL(162, sys_semget, 4) +#define __NR_semop 163 +__SYSCALL(163, sys_semop, 4) +#define __NR_semctl 164 +__SYSCALL(164, sys_semctl, 4) +#define __NR_available165 165 +__SYSCALL(165, sys_ni_syscall, 0) +#define __NR_msgget 166 +__SYSCALL(166, sys_msgget, 4) +#define __NR_msgsnd 167 +__SYSCALL(167, sys_msgsnd, 4) +#define __NR_msgrcv 168 +__SYSCALL(168, sys_msgrcv, 4) +#define __NR_msgctl 169 +__SYSCALL(169, sys_msgctl, 4) +#define __NR_available170 170 +__SYSCALL(170, sys_ni_syscall, 0) +#define __NR_available171 171 +__SYSCALL(171, sys_ni_syscall, 0) + +/* File System */ + +#define __NR_mount 172 +__SYSCALL(172, sys_mount, 5) +#define __NR_swapon 173 +__SYSCALL(173, sys_swapon, 2) +#define __NR_chroot 174 +__SYSCALL(174, sys_chroot, 1) +#define __NR_pivot_root 175 +__SYSCALL(175, sys_pivot_root, 2) +#define __NR_umount 176 +__SYSCALL(176, sys_umount, 2) +#define __NR_swapoff 177 +__SYSCALL(177, sys_swapoff, 1) +#define __NR_sync 178 +__SYSCALL(178, sys_sync, 0) +#define __NR_available179 179 +__SYSCALL(179, sys_ni_syscall, 0) +#define __NR_setfsuid 180 +__SYSCALL(180, sys_setfsuid, 1) +#define __NR_setfsgid 181 +__SYSCALL(181, sys_setfsgid, 1) +#define __NR_sysfs 182 +__SYSCALL(182, sys_sysfs, 3) +#define __NR_ustat 183 +__SYSCALL(183, sys_ustat, 2) +#define __NR_statfs 184 +__SYSCALL(184, sys_statfs, 2) +#define __NR_fstatfs 185 +__SYSCALL(185, sys_fstatfs, 2) +#define __NR_statfs64 186 +__SYSCALL(186, sys_statfs64, 3) +#define __NR_fstatfs64 187 +__SYSCALL(187, sys_fstatfs64, 3) + +/* System */ + +#define __NR_setrlimit 188 +__SYSCALL(188, sys_setrlimit, 2) +#define __NR_getrlimit 189 +__SYSCALL(189, sys_getrlimit, 2) +#define __NR_getrusage 190 +__SYSCALL(190, sys_getrusage, 2) +#define __NR_futex 191 +__SYSCALL(191, sys_futex, 5) +#define __NR_gettimeofday 192 +__SYSCALL(192, sys_gettimeofday, 2) +#define __NR_settimeofday 193 +__SYSCALL(193, sys_settimeofday, 2) +#define __NR_adjtimex 194 +__SYSCALL(194, sys_adjtimex, 1) +#define __NR_nanosleep 195 +__SYSCALL(195, sys_nanosleep, 2) +#define __NR_getgroups 196 +__SYSCALL(196, sys_getgroups, 2) +#define __NR_setgroups 197 +__SYSCALL(197, sys_setgroups, 2) +#define __NR_sethostname 198 +__SYSCALL(198, sys_sethostname, 2) +#define __NR_setdomainname 199 +__SYSCALL(199, sys_setdomainname, 2) +#define __NR_syslog 200 +__SYSCALL(200, sys_syslog, 3) +#define __NR_vhangup 201 +__SYSCALL(201, sys_vhangup, 0) +#define __NR_uselib 202 +__SYSCALL(202, sys_uselib, 1) +#define __NR_reboot 203 +__SYSCALL(203, sys_reboot, 3) +#define __NR_quotactl 204 +__SYSCALL(204, sys_quotactl, 4) +#define __NR_nfsservctl 205 +__SYSCALL(205, sys_ni_syscall, 0) +#define __NR__sysctl 206 +__SYSCALL(206, sys_sysctl, 1) +#define __NR_bdflush 207 +__SYSCALL(207, sys_bdflush, 2) +#define __NR_uname 208 +__SYSCALL(208, sys_newuname, 1) +#define __NR_sysinfo 209 +__SYSCALL(209, sys_sysinfo, 1) +#define __NR_init_module 210 +__SYSCALL(210, sys_init_module, 2) +#define __NR_delete_module 211 +__SYSCALL(211, sys_delete_module, 1) + +#define __NR_sched_setparam 212 +__SYSCALL(212, sys_sched_setparam, 2) +#define __NR_sched_getparam 213 +__SYSCALL(213, sys_sched_getparam, 2) +#define __NR_sched_setscheduler 214 +__SYSCALL(214, sys_sched_setscheduler, 3) +#define __NR_sched_getscheduler 215 +__SYSCALL(215, sys_sched_getscheduler, 1) +#define __NR_sched_get_priority_max 216 +__SYSCALL(216, sys_sched_get_priority_max, 1) +#define __NR_sched_get_priority_min 217 +__SYSCALL(217, sys_sched_get_priority_min, 1) +#define __NR_sched_rr_get_interval 218 +__SYSCALL(218, sys_sched_rr_get_interval, 2) +#define __NR_sched_yield 219 +__SYSCALL(219, sys_sched_yield, 0) +#define __NR_available222 222 +__SYSCALL(222, sys_ni_syscall, 0) + +/* Signal Handling */ + +#define __NR_restart_syscall 223 +__SYSCALL(223, sys_restart_syscall, 0) +#define __NR_sigaltstack 224 +__SYSCALL(224, xtensa_sigaltstack, 2) +#define __NR_rt_sigreturn 225 +__SYSCALL(225, xtensa_rt_sigreturn, 1) +#define __NR_rt_sigaction 226 +__SYSCALL(226, sys_rt_sigaction, 4) +#define __NR_rt_sigprocmask 227 +__SYSCALL(227, sys_rt_sigprocmask, 4) +#define __NR_rt_sigpending 228 +__SYSCALL(228, sys_rt_sigpending, 2) +#define __NR_rt_sigtimedwait 229 +__SYSCALL(229, sys_rt_sigtimedwait, 4) +#define __NR_rt_sigqueueinfo 230 +__SYSCALL(230, sys_rt_sigqueueinfo, 3) +#define __NR_rt_sigsuspend 231 +__SYSCALL(231, sys_rt_sigsuspend, 2) + +/* Message */ + +#define __NR_mq_open 232 +__SYSCALL(232, sys_mq_open, 4) +#define __NR_mq_unlink 233 +__SYSCALL(233, sys_mq_unlink, 1) +#define __NR_mq_timedsend 234 +__SYSCALL(234, sys_mq_timedsend, 5) +#define __NR_mq_timedreceive 235 +__SYSCALL(235, sys_mq_timedreceive, 5) +#define __NR_mq_notify 236 +__SYSCALL(236, sys_mq_notify, 2) +#define __NR_mq_getsetattr 237 +__SYSCALL(237, sys_mq_getsetattr, 3) +#define __NR_available238 238 +__SYSCALL(238, sys_ni_syscall, 0) + +/* IO */ + +#define __NR_io_setup 239 +__SYSCALL(239, sys_io_setup, 2) +#define __NR_io_destroy 240 +__SYSCALL(240, sys_io_destroy, 1) +#define __NR_io_submit 241 +__SYSCALL(241, sys_io_submit, 3) +#define __NR_io_getevents 242 +__SYSCALL(242, sys_io_getevents, 5) +#define __NR_io_cancel 243 +__SYSCALL(243, sys_io_cancel, 3) +#define __NR_clock_settime 244 +__SYSCALL(244, sys_clock_settime, 2) +#define __NR_clock_gettime 245 +__SYSCALL(245, sys_clock_gettime, 2) +#define __NR_clock_getres 246 +__SYSCALL(246, sys_clock_getres, 2) +#define __NR_clock_nanosleep 247 +__SYSCALL(247, sys_clock_nanosleep, 4) + +/* Timer */ + +#define __NR_timer_create 248 +__SYSCALL(248, sys_timer_create, 3) +#define __NR_timer_delete 249 +__SYSCALL(249, sys_timer_delete, 1) +#define __NR_timer_settime 250 +__SYSCALL(250, sys_timer_settime, 4) +#define __NR_timer_gettime 251 +__SYSCALL(251, sys_timer_gettime, 2) +#define __NR_timer_getoverrun 252 +__SYSCALL(252, sys_timer_getoverrun, 1) + +/* System */ + +#define __NR_reserved244 253 +__SYSCALL(253, sys_ni_syscall, 0) +#define __NR_lookup_dcookie 254 +__SYSCALL(254, sys_lookup_dcookie, 4) +#define __NR_available255 255 +__SYSCALL(255, sys_ni_syscall, 0) +#define __NR_add_key 256 +__SYSCALL(256, sys_add_key, 5) +#define __NR_request_key 257 +__SYSCALL(257, sys_request_key, 5) +#define __NR_keyctl 258 +__SYSCALL(258, sys_keyctl, 5) +#define __NR_available259 259 +__SYSCALL(259, sys_ni_syscall, 0) + + +#define __NR_readahead 260 +__SYSCALL(260, sys_readahead, 5) +#define __NR_remap_file_pages 261 +__SYSCALL(261, sys_remap_file_pages, 5) +#define __NR_migrate_pages 262 +__SYSCALL(262, sys_migrate_pages, 0) +#define __NR_mbind 263 +__SYSCALL(263, sys_mbind, 6) +#define __NR_get_mempolicy 264 +__SYSCALL(264, sys_get_mempolicy, 5) +#define __NR_set_mempolicy 265 +__SYSCALL(265, sys_set_mempolicy, 3) +#define __NR_unshare 266 +__SYSCALL(266, sys_unshare, 1) +#define __NR_move_pages 267 +__SYSCALL(267, sys_move_pages, 0) +#define __NR_splice 268 +__SYSCALL(268, sys_splice, 0) +#define __NR_tee 269 +__SYSCALL(269, sys_tee, 0) +#define __NR_vmsplice 270 +__SYSCALL(270, sys_vmsplice, 0) +#define __NR_available271 271 +__SYSCALL(271, sys_ni_syscall, 0) + +#define __NR_pselect6 272 +__SYSCALL(272, sys_pselect6, 0) +#define __NR_ppoll 273 +__SYSCALL(273, sys_ppoll, 0) +#define __NR_epoll_pwait 274 +__SYSCALL(274, sys_epoll_pwait, 0) +#define __NR_available275 275 +__SYSCALL(275, sys_ni_syscall, 0) + +#define __NR_inotify_init 276 +__SYSCALL(276, sys_inotify_init, 0) +#define __NR_inotify_add_watch 277 +__SYSCALL(277, sys_inotify_add_watch, 3) +#define __NR_inotify_rm_watch 278 +__SYSCALL(278, sys_inotify_rm_watch, 2) +#define __NR_available279 279 +__SYSCALL(279, sys_ni_syscall, 0) + +#define __NR_getcpu 280 +__SYSCALL(280, sys_getcpu, 0) +#define __NR_kexec_load 281 +__SYSCALL(281, sys_ni_syscall, 0) + +#define __NR_ioprio_set 282 +__SYSCALL(282, sys_ioprio_set, 2) +#define __NR_ioprio_get 283 +__SYSCALL(283, sys_ioprio_get, 3) + +#define __NR_set_robust_list 284 +__SYSCALL(284, sys_set_robust_list, 3) +#define __NR_get_robust_list 285 +__SYSCALL(285, sys_get_robust_list, 3) +#define __NR_reserved286 286 /* sync_file_rangeX */ +__SYSCALL(286, sys_ni_syscall, 3) +#define __NR_available287 287 +__SYSCALL(287, sys_faccessat, 0) + +/* Relative File Operations */ + +#define __NR_openat 288 +__SYSCALL(288, sys_openat, 4) +#define __NR_mkdirat 289 +__SYSCALL(289, sys_mkdirat, 3) +#define __NR_mknodat 290 +__SYSCALL(290, sys_mknodat, 4) +#define __NR_unlinkat 291 +__SYSCALL(291, sys_unlinkat, 3) +#define __NR_renameat 292 +__SYSCALL(292, sys_renameat, 4) +#define __NR_linkat 293 +__SYSCALL(293, sys_linkat, 5) +#define __NR_symlinkat 294 +__SYSCALL(294, sys_symlinkat, 3) +#define __NR_readlinkat 295 +__SYSCALL(295, sys_readlinkat, 4) +#define __NR_utimensat 296 +__SYSCALL(296, sys_utimensat, 0) +#define __NR_fchownat 297 +__SYSCALL(297, sys_fchownat, 5) +#define __NR_futimesat 298 +__SYSCALL(298, sys_futimesat, 4) +#define __NR_fstatat64 299 +__SYSCALL(299, sys_fstatat64, 0) +#define __NR_fchmodat 300 +__SYSCALL(300, sys_fchmodat, 4) +#define __NR_faccessat 301 +__SYSCALL(301, sys_faccessat, 4) +#define __NR_available302 302 +__SYSCALL(302, sys_ni_syscall, 0) +#define __NR_available303 303 +__SYSCALL(303, sys_ni_syscall, 0) + +#define __NR_signalfd 304 +__SYSCALL(304, sys_signalfd, 3) +/* 305 was __NR_timerfd */ +__SYSCALL(305, sys_ni_syscall, 0) +#define __NR_eventfd 306 +__SYSCALL(306, sys_eventfd, 1) +#define __NR_recvmmsg 307 +__SYSCALL(307, sys_recvmmsg, 5) +#define __NR_setns 308 +__SYSCALL(308, sys_setns, 2) + +#define __NR_syscall_count 309 + +/* + * sysxtensa syscall handler + * + * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); + * a2 a6 a3 a4 a5 + */ + +#define SYS_XTENSA_RESERVED 0 /* don't use this */ +#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */ +#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ +#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */ +#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ + +#define SYS_XTENSA_COUNT 5 /* count */ diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index 05b3f09..a5c01e7 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -34,7 +34,6 @@ syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= { #undef __SYSCALL #define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol, -#undef _XTENSA_UNISTD_H #undef __KERNEL_SYSCALLS__ #include }; -- cgit v0.10.2 From 795ca178c4fbb4e5d703df8cdab5c1711ba402b1 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:41 +0400 Subject: xtensa: Use Kbuild infrastructure to handle asm-generic headers Use Kbuild infrastructure to handle the asm-generic headers and remove the wrapper headers that call them. This only affects headers that do nothing but include the generic equivalent. It does not touch any header that does a little more. Signed-off-by: Steven Rostedt Signed-off-by: Max Filippov Signed-off-by: Chris Zankel diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index 4a159da..6d13027 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -1,3 +1,28 @@ - +generic-y += bitsperlong.h +generic-y += bug.h generic-y += clkdev.h +generic-y += cputime.h +generic-y += device.h +generic-y += div64.h +generic-y += emergency-restart.h +generic-y += errno.h generic-y += exec.h +generic-y += fcntl.h +generic-y += futex.h +generic-y += hardirq.h +generic-y += ioctl.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += kvm_para.h +generic-y += local.h +generic-y += local64.h +generic-y += percpu.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += sections.h +generic-y += siginfo.h +generic-y += statfs.h +generic-y += termios.h +generic-y += topology.h +generic-y += xor.h diff --git a/arch/xtensa/include/asm/bug.h b/arch/xtensa/include/asm/bug.h deleted file mode 100644 index 3e52d72..0000000 --- a/arch/xtensa/include/asm/bug.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-xtensa/bug.h - * - * Macros to cause a 'bug' message. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_BUG_H -#define _XTENSA_BUG_H - -#include - -#endif /* _XTENSA_BUG_H */ diff --git a/arch/xtensa/include/asm/cputime.h b/arch/xtensa/include/asm/cputime.h deleted file mode 100644 index a7fb864..0000000 --- a/arch/xtensa/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _XTENSA_CPUTIME_H -#define _XTENSA_CPUTIME_H - -#include - -#endif /* _XTENSA_CPUTIME_H */ diff --git a/arch/xtensa/include/asm/device.h b/arch/xtensa/include/asm/device.h deleted file mode 100644 index d8f9872..0000000 --- a/arch/xtensa/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/xtensa/include/asm/div64.h b/arch/xtensa/include/asm/div64.h deleted file mode 100644 index f35678c..0000000 --- a/arch/xtensa/include/asm/div64.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/div64.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_DIV64_H -#define _XTENSA_DIV64_H - -#include - -#endif /* _XTENSA_DIV64_H */ diff --git a/arch/xtensa/include/asm/emergency-restart.h b/arch/xtensa/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c4..0000000 --- a/arch/xtensa/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/xtensa/include/asm/futex.h b/arch/xtensa/include/asm/futex.h deleted file mode 100644 index 0b74582..0000000 --- a/arch/xtensa/include/asm/futex.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h deleted file mode 100644 index 91695a1..0000000 --- a/arch/xtensa/include/asm/hardirq.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/hardirq.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_HARDIRQ_H -#define _XTENSA_HARDIRQ_H - -#include - -#endif /* _XTENSA_HARDIRQ_H */ diff --git a/arch/xtensa/include/asm/irq_regs.h b/arch/xtensa/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b..0000000 --- a/arch/xtensa/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/kdebug.h b/arch/xtensa/include/asm/kdebug.h deleted file mode 100644 index 6ece1b0..0000000 --- a/arch/xtensa/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/kmap_types.h b/arch/xtensa/include/asm/kmap_types.h deleted file mode 100644 index 11c687e..0000000 --- a/arch/xtensa/include/asm/kmap_types.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _XTENSA_KMAP_TYPES_H -#define _XTENSA_KMAP_TYPES_H - -#include - -#endif /* _XTENSA_KMAP_TYPES_H */ diff --git a/arch/xtensa/include/asm/local.h b/arch/xtensa/include/asm/local.h deleted file mode 100644 index 48723e5..0000000 --- a/arch/xtensa/include/asm/local.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/local.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_LOCAL_H -#define _XTENSA_LOCAL_H - -#include - -#endif /* _XTENSA_LOCAL_H */ diff --git a/arch/xtensa/include/asm/local64.h b/arch/xtensa/include/asm/local64.h deleted file mode 100644 index 36c93b5..0000000 --- a/arch/xtensa/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/percpu.h b/arch/xtensa/include/asm/percpu.h deleted file mode 100644 index 6d2bc2a..0000000 --- a/arch/xtensa/include/asm/percpu.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/include/asm-xtensa/percpu.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PERCPU__ -#define _XTENSA_PERCPU__ - -#include - -#endif /* _XTENSA_PERCPU__ */ diff --git a/arch/xtensa/include/asm/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h deleted file mode 100644 index a0421a6..0000000 --- a/arch/xtensa/include/asm/scatterlist.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/scatterlist.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SCATTERLIST_H -#define _XTENSA_SCATTERLIST_H - -#include - -#endif /* _XTENSA_SCATTERLIST_H */ diff --git a/arch/xtensa/include/asm/sections.h b/arch/xtensa/include/asm/sections.h deleted file mode 100644 index 40b5191..0000000 --- a/arch/xtensa/include/asm/sections.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/sections.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SECTIONS_H -#define _XTENSA_SECTIONS_H - -#include - -#endif /* _XTENSA_SECTIONS_H */ diff --git a/arch/xtensa/include/asm/termios.h b/arch/xtensa/include/asm/termios.h deleted file mode 100644 index 8b661ca..0000000 --- a/arch/xtensa/include/asm/termios.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * include/asm-xtensa/termios.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ -#ifndef _XTENSA_TERMIOS_H -#define _XTENSA_TERMIOS_H - -#include - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ - -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ - -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _XTENSA_TERMIOS_H */ diff --git a/arch/xtensa/include/asm/topology.h b/arch/xtensa/include/asm/topology.h deleted file mode 100644 index 7309e38..0000000 --- a/arch/xtensa/include/asm/topology.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/topology.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TOPOLOGY_H -#define _XTENSA_TOPOLOGY_H - -#include - -#endif /* _XTENSA_TOPOLOGY_H */ diff --git a/arch/xtensa/include/asm/xor.h b/arch/xtensa/include/asm/xor.h deleted file mode 100644 index e7b1f08..0000000 --- a/arch/xtensa/include/asm/xor.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/xor.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_XOR_H -#define _XTENSA_XOR_H - -#include - -#endif diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild index 040178c..56aad54 100644 --- a/arch/xtensa/include/uapi/asm/Kbuild +++ b/arch/xtensa/include/uapi/asm/Kbuild @@ -2,33 +2,24 @@ include include/uapi/asm-generic/Kbuild.asm header-y += auxvec.h -header-y += bitsperlong.h header-y += byteorder.h -header-y += errno.h -header-y += fcntl.h -header-y += ioctl.h header-y += ioctls.h header-y += ipcbuf.h -header-y += kvm_para.h header-y += mman.h header-y += msgbuf.h header-y += param.h header-y += poll.h header-y += posix_types.h header-y += ptrace.h -header-y += resource.h header-y += sembuf.h header-y += setup.h header-y += shmbuf.h header-y += sigcontext.h -header-y += siginfo.h header-y += signal.h header-y += socket.h header-y += sockios.h header-y += stat.h -header-y += statfs.h header-y += swab.h header-y += termbits.h -header-y += termios.h header-y += types.h header-y += unistd.h diff --git a/arch/xtensa/include/uapi/asm/bitsperlong.h b/arch/xtensa/include/uapi/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0..0000000 --- a/arch/xtensa/include/uapi/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/uapi/asm/errno.h b/arch/xtensa/include/uapi/asm/errno.h deleted file mode 100644 index a0f3b96..0000000 --- a/arch/xtensa/include/uapi/asm/errno.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/errno.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_ERRNO_H -#define _XTENSA_ERRNO_H - -#include - -#endif /* _XTENSA_ERRNO_H */ diff --git a/arch/xtensa/include/uapi/asm/fcntl.h b/arch/xtensa/include/uapi/asm/fcntl.h deleted file mode 100644 index 46ab12d..0000000 --- a/arch/xtensa/include/uapi/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/uapi/asm/ioctl.h b/arch/xtensa/include/uapi/asm/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/arch/xtensa/include/uapi/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/uapi/asm/kvm_para.h b/arch/xtensa/include/uapi/asm/kvm_para.h deleted file mode 100644 index 14fab8f..0000000 --- a/arch/xtensa/include/uapi/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/uapi/asm/resource.h b/arch/xtensa/include/uapi/asm/resource.h deleted file mode 100644 index 17b5ab3..0000000 --- a/arch/xtensa/include/uapi/asm/resource.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/resource.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_RESOURCE_H -#define _XTENSA_RESOURCE_H - -#include - -#endif /* _XTENSA_RESOURCE_H */ diff --git a/arch/xtensa/include/uapi/asm/siginfo.h b/arch/xtensa/include/uapi/asm/siginfo.h deleted file mode 100644 index 6916248..0000000 --- a/arch/xtensa/include/uapi/asm/siginfo.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/siginfo.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGINFO_H -#define _XTENSA_SIGINFO_H - -#include - -#endif /* _XTENSA_SIGINFO_H */ diff --git a/arch/xtensa/include/uapi/asm/statfs.h b/arch/xtensa/include/uapi/asm/statfs.h deleted file mode 100644 index 9c3d1a2..0000000 --- a/arch/xtensa/include/uapi/asm/statfs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-xtensa/statfs.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_STATFS_H -#define _XTENSA_STATFS_H - -#include - -#endif /* _XTENSA_STATFS_H */ - diff --git a/arch/xtensa/include/uapi/asm/termios.h b/arch/xtensa/include/uapi/asm/termios.h deleted file mode 100644 index 32a770f..0000000 --- a/arch/xtensa/include/uapi/asm/termios.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-xtensa/termios.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _UAPI_XTENSA_TERMIOS_H -#define _UAPI_XTENSA_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* Modem lines */ - -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_XTENSA_TERMIOS_H */ -- cgit v0.10.2 From 39013bd60e79148961583402ed70bd105f95d260 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 15 Oct 2012 14:13:25 +0100 Subject: ASoC: Ux500: Dispose of device nodes correctly When of_parse_phandle() is used to find a device node, its reference count is incremented by the helper. Once we're finished with them, it's our responsibly to ensure they are freed in the correct manor. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Mark Brown diff --git a/sound/soc/ux500/mop500.c b/sound/soc/ux500/mop500.c index 356611d..54f7e25 100644 --- a/sound/soc/ux500/mop500.c +++ b/sound/soc/ux500/mop500.c @@ -57,6 +57,20 @@ static struct snd_soc_card mop500_card = { .num_links = ARRAY_SIZE(mop500_dai_links), }; +static void mop500_of_node_put(void) +{ + int i; + + for (i = 0; i < 2; i++) { + if (mop500_dai_links[i].cpu_of_node) + of_node_put((struct device_node *) + mop500_dai_links[i].cpu_of_node); + if (mop500_dai_links[i].codec_of_node) + of_node_put((struct device_node *) + mop500_dai_links[i].codec_of_node); + } +} + static int __devinit mop500_of_probe(struct platform_device *pdev, struct device_node *np) { @@ -69,6 +83,7 @@ static int __devinit mop500_of_probe(struct platform_device *pdev, if (!(msp_np[0] && msp_np[1] && codec_np)) { dev_err(&pdev->dev, "Phandle missing or invalid\n"); + mop500_of_node_put(); return -EINVAL; } @@ -83,6 +98,7 @@ static int __devinit mop500_of_probe(struct platform_device *pdev, return 0; } + static int __devinit mop500_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -128,6 +144,7 @@ static int __devexit mop500_remove(struct platform_device *pdev) snd_soc_unregister_card(mop500_card); mop500_ab8500_remove(mop500_card); + mop500_of_node_put(); return 0; } -- cgit v0.10.2 From 05304949332c6d2c7b50f2d0f666a52369f09ced Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 15 Oct 2012 14:13:26 +0100 Subject: ASoC: ux500_msp_i2s: Fix devm_* and return code merge error Some ux500_msp_i2s patches clashed with: b18e93a493626c1446f9788ebd5844d008bbf71c ASoC: ux500_msp_i2s: better use devm functions and fix error return code ... leaving the driver uncompilable. This patch fixes the issues encountered. Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Mark Brown diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c index b7c996e..a26c6bf 100644 --- a/sound/soc/ux500/ux500_msp_i2s.c +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -697,14 +698,11 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, platform_data = devm_kzalloc(&pdev->dev, sizeof(struct msp_i2s_platform_data), GFP_KERNEL); if (!platform_data) - ret = -ENOMEM; + return -ENOMEM; } } else if (!platform_data) - ret = -EINVAL; - - if (ret) - goto err_res; + return -EINVAL; dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__, pdev->name, platform_data->id); -- cgit v0.10.2 From a5f5af8698a5cb3a68608a40a8782bdf8263cb97 Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Thu, 4 Oct 2012 00:28:21 +0200 Subject: drm/nouveau/hwmon: fix the initialization condition Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index b9d5335..47677e3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -706,8 +706,7 @@ nouveau_hwmon_init(struct drm_device *dev) struct device *hwmon_dev; int ret = 0; - if (!therm || !therm->temp_get || !therm->attr_get || - !therm->attr_set || therm->temp_get(therm) < 0) + if (!therm || !therm->temp_get || !therm->attr_get || !therm->attr_set) return -ENODEV; hwmon_dev = hwmon_device_register(&dev->pdev->dev); -- cgit v0.10.2 From a6fd5cf3c986dab3950185a53ef02a399bf2cf2b Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Thu, 4 Oct 2012 00:44:19 +0200 Subject: drm/nouveau/pm: fix a typo related to the move to the therm subdev Reported-by: Vekin on IRC Reported-by: Emil Velikov Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index 47677e3..75314a1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -52,7 +52,7 @@ nouveau_pm_perflvl_aux(struct drm_device *dev, struct nouveau_pm_level *perflvl, { struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_pm *pm = nouveau_pm(dev); - struct nouveau_therm *therm = nouveau_therm(drm); + struct nouveau_therm *therm = nouveau_therm(drm->device); int ret; /*XXX: not on all boards, we should control based on temperature -- cgit v0.10.2 From eed6187d9f19535ac9339b684537f8535bf563b7 Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Thu, 4 Oct 2012 01:00:13 +0200 Subject: drm/nouveau/pm: do not stop reclocking if failing to set the fan speed With the introduction of fan management modes, fan may not be drivable. We should allow reclocking nonetheless. This return was stupid to begin with since it may have left the card in an intermediate state (clocks corresponding to a perflvl and voltage corresponding to another one). The reclocking code will need to be rewritten in a near-future in order to provide a better error handling. Reported-by: Marcin Slusarz Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index 75314a1..112d0de 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -64,7 +64,6 @@ nouveau_pm_perflvl_aux(struct drm_device *dev, struct nouveau_pm_level *perflvl, ret = therm->fan_set(therm, perflvl->fanspeed); if (ret && ret != -ENODEV) { NV_ERROR(drm, "fanspeed set failed: %d\n", ret); - return ret; } } -- cgit v0.10.2 From 5db4c6c5dd26f7737c1fa45ea73549b8aef6e395 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Thu, 11 Oct 2012 23:53:48 +0200 Subject: drm/nv50/fb: fix double free of vram mm nouveau_fb_destroy already calls nouveau_mm_fini on vram mm. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c index 436e9ef..42d7539 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c @@ -277,7 +277,6 @@ nv50_fb_dtor(struct nouveau_object *object) __free_page(priv->r100c08_page); } - nouveau_mm_fini(&priv->base.vram); nouveau_fb_destroy(&priv->base); } -- cgit v0.10.2 From df1b4b91e5dae04782f65f657d771b23ca3bdc99 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Sun, 14 Oct 2012 01:58:26 +0400 Subject: drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP ttm_agp_tt_create is itself defined under CONFIG_AGP, so there's no point calling it otherwise. Signed-off-by: Max Filippov Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 259e5f1..35ac57f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -456,6 +456,7 @@ static struct ttm_tt * nouveau_ttm_tt_create(struct ttm_bo_device *bdev, unsigned long size, uint32_t page_flags, struct page *dummy_read) { +#if __OS_HAS_AGP struct nouveau_drm *drm = nouveau_bdev(bdev); struct drm_device *dev = drm->dev; @@ -463,6 +464,7 @@ nouveau_ttm_tt_create(struct ttm_bo_device *bdev, unsigned long size, return ttm_agp_tt_create(bdev, dev->agp->bridge, size, page_flags, dummy_read); } +#endif return nouveau_sgdma_create_ttm(bdev, size, page_flags, dummy_read); } -- cgit v0.10.2 From 565f571c48f01a681243a356e9083f5cf24b432e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 16 Oct 2012 16:25:08 +1000 Subject: drm/nouveau/bios: fix typo in error message Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c index 9ed6e72..7d75038 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c @@ -43,7 +43,7 @@ dcb_table(struct nouveau_bios *bios, u8 *ver, u8 *hdr, u8 *cnt, u8 *len) *ver = nv_ro08(bios, dcb); if (*ver >= 0x41) { - nv_warn(bios, "DCB *ver 0x%02x unknown\n", *ver); + nv_warn(bios, "DCB version 0x%02x unknown\n", *ver); return 0x0000; } else if (*ver >= 0x30) { -- cgit v0.10.2 From 8a00b6af4cc547725f231c8367ddc7cb56b2cf76 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 16 Oct 2012 16:40:53 +1000 Subject: nouveau: fix warning on 32-bit build. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/core/subdev/therm/fan.c b/drivers/gpu/drm/nouveau/core/subdev/therm/fan.c index b292379..5231786 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/therm/fan.c +++ b/drivers/gpu/drm/nouveau/core/subdev/therm/fan.c @@ -134,7 +134,7 @@ nouveau_therm_fan_sense(struct nouveau_therm *therm) end = ptimer->read(ptimer); if (cycles == 5) { - tach = (u64)60000000000; + tach = (u64)60000000000ULL; do_div(tach, (end - start)); return tach; } else -- cgit v0.10.2 From 6478d414fe4ee3114e760fb6d6df0f8e2f66186a Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Sun, 14 Oct 2012 16:33:11 +0200 Subject: DRM/i915: Don't delete DPLL Multiplier during DAC init. The DPLL multipiler is set up in intel_display.c:i9xx_update_pll() called from i9xx_crtc_mode_set(). There the DPLL multiplier is adjusted so that the SDVO gets a sufficient bus clock. When cloning a CRTC between an SDVO driven encoder and the standard DAC the DAC setup code reseted the multiplier value to 1 thus undoing the correct setup. There is no need to touch the multiplier in the DAC setup code: the correct value (i.e. 1 in case no SDVO encoder is used) is set by i9xx_update_pll() already. A comment at the code suggested that this code is a left over from the days when there was no setup for clone modes. Signed-off-by: Egbert Eich Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index c42b980..ae3a3d5 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -220,20 +220,7 @@ static void intel_crt_mode_set(struct drm_encoder *encoder, intel_encoder_to_crt(to_intel_encoder(encoder)); struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_i915_private *dev_priv = dev->dev_private; - int dpll_md_reg; - u32 adpa, dpll_md; - - dpll_md_reg = DPLL_MD(intel_crtc->pipe); - - /* - * Disable separate mode multiplier used when cloning SDVO to CRT - * XXX this needs to be adjusted when we really are cloning - */ - if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { - dpll_md = I915_READ(dpll_md_reg); - I915_WRITE(dpll_md_reg, - dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); - } + u32 adpa; adpa = ADPA_HOTPLUG_BITS; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) -- cgit v0.10.2 From 5f85f176c2f1c9d2a23f60ca0b99e4d0aa5a26a7 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Sun, 14 Oct 2012 15:46:38 +0200 Subject: DRM/i915: Add QUIRK_INVERT_BRIGHTNESS for NCR machines. NCR machines with LVDS panels using Intel chipsets need to have the QUIRK_INVERT_BRIGHTNESS bit set. Unfortunately NCR doesn't set a meaningful subvendor/subdevice ID, therefore we add a DMI dependent quirk list. Signed-off-by: Egbert Eich [danvet: fixup whitespace fail.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3511eff..68495da 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7892,6 +7892,34 @@ struct intel_quirk { void (*hook)(struct drm_device *dev); }; +/* For systems that don't have a meaningful PCI subdevice/subvendor ID */ +struct intel_dmi_quirk { + void (*hook)(struct drm_device *dev); + const struct dmi_system_id (*dmi_id_list)[]; +}; + +static int intel_dmi_reverse_brightness(const struct dmi_system_id *id) +{ + DRM_INFO("Backlight polarity reversed on %s\n", id->ident); + return 1; +} + +static const struct intel_dmi_quirk intel_dmi_quirks[] = { + { + .dmi_id_list = &(const struct dmi_system_id[]) { + { + .callback = intel_dmi_reverse_brightness, + .ident = "NCR Corporation", + .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, ""), + }, + }, + { } /* terminating entry */ + }, + .hook = quirk_invert_brightness, + }, +}; + static struct intel_quirk intel_quirks[] = { /* HP Mini needs pipe A force quirk (LP: #322104) */ { 0x27ae, 0x103c, 0x361a, quirk_pipea_force }, @@ -7931,6 +7959,10 @@ static void intel_init_quirks(struct drm_device *dev) q->subsystem_device == PCI_ANY_ID)) q->hook(dev); } + for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) { + if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0) + intel_dmi_quirks[i].hook(dev); + } } /* Disable the VGA plane that we never use */ -- cgit v0.10.2 From e3b86d6941c7e5f90be05d986fce1fcb40c68d6b Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Sat, 13 Oct 2012 14:30:15 +0200 Subject: DRM/i915: Don't clone SDVO LVDS with analog. SDVO LVDS are not clonable as the input mode gets adjusted by the LVDS encoder. Signed-off-by: Egbert Eich Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 39c3198..3a7251a 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2278,10 +2278,8 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device) intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1; } - /* SDVO LVDS is cloneable because the SDVO encoder does the upscaling, - * as opposed to native LVDS, where we upscale with the panel-fitter - * (and hence only the native LVDS resolution could be cloned). */ - intel_sdvo->base.cloneable = true; + /* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */ + intel_sdvo->base.cloneable = false; intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector)) -- cgit v0.10.2 From e751823da27d37d25e5543abef2dc031f8813bc8 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Sat, 13 Oct 2012 14:29:31 +0200 Subject: DRM/i915: Restore sdvo_flags after dtd->mode->dtd Roundrtrip. For TV and LVDS encoders intel_sdvo_set_input_timings_for_mode() is called to pass a mode to the sdvo chip and retrieve a dtd containing information needed to calculate the adjusted_mode which is done by intel_sdvo_get_dtd_from_mode(). To set this adjusted_mode as input mode for the sdvo chip, a dtd is recalculated using intel_sdvo_get_mode_from_dtd(). During this round trip the sdvo_flags contained in the dtd obtained from the hardware are lost. Since these flags cannot be ignored in all cases this patch preserves and restores them. This regression has been introduced in commit 6651819b4b4fc3caa6964c5d825eb4bb996f3905 Author: Daniel Vetter Date: Sun Apr 1 19:16:18 2012 +0200 drm/i915: handle input/output sdvo timings separately in mode_set Signed-off-by: Egbert Eich Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 3a7251a..d2e8c9f 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -140,6 +140,11 @@ struct intel_sdvo { /* DDC bus used by this SDVO encoder */ uint8_t ddc_bus; + + /* + * the sdvo flag gets lost in round trip: dtd->adjusted_mode->dtd + */ + uint8_t dtd_sdvo_flags; }; struct intel_sdvo_connector { @@ -985,6 +990,7 @@ intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo, return false; intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); + intel_sdvo->dtd_sdvo_flags = input_dtd.part2.sdvo_flags; return true; } @@ -1093,6 +1099,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, * adjusted_mode. */ intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + if (intel_sdvo->is_tv || intel_sdvo->is_lvds) + input_dtd.part2.sdvo_flags = intel_sdvo->dtd_sdvo_flags; if (!intel_sdvo_set_input_timing(intel_sdvo, &input_dtd)) DRM_INFO("Setting input timings on %s failed\n", SDVO_NAME(intel_sdvo)); -- cgit v0.10.2 From b06fbda328490ec471e72659a9bf69f16a1c8dc9 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 16 Oct 2012 09:50:25 +0200 Subject: Revert "drm/i915: Try harder to complete DP training pattern 1" This reverts commit 2477367083b3eaa97f87993ab26627a02f350551. If (for whatever reason) the DP sink device never asks for the maximal voltage level, we never don't hit the check that should bail us out after 5 retries of the same voltage. Which leads to an endless loop in the DP link training code, which hangs the driver. Now some more DP link training experiments on eDP panels seem to indicate that our training algorithm isn't robust enough anyway and needs more work. Hence for 3.7-fixes, let's just revert the regressing commit instead of trying to apply more duct-tape. Reported-by: Oleksij Rempel Acked-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index bd2c34a..e37ca2c 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1798,7 +1798,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; if (i == intel_dp->lane_count && voltage_tries == 5) { - if (++loop_tries == 5) { + ++loop_tries; + if (loop_tries == 5) { DRM_DEBUG_KMS("too many full retries, give up\n"); break; } @@ -1808,11 +1809,15 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) } /* Check to see if we've tried the same voltage 5 times */ - if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) != voltage) { - voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; - voltage_tries = 0; - } else + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { ++voltage_tries; + if (voltage_tries == 5) { + DRM_DEBUG_KMS("too many voltage retries, give up\n"); + break; + } + } else + voltage_tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; /* Compute new intel_dp->train_set as requested by target */ intel_get_adjust_train(intel_dp, link_status); -- cgit v0.10.2 From c2fa3edc58a262dfcb7aea78e24661e90e00098c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 15 Oct 2012 23:24:55 -0700 Subject: usb: renesas_usbhs: fixup __usbhs_for_each_pipe 1st pos __usbhs_for_each_pipe() is the macro which moves around each pipe, but it has a bug which didn't care about 1st pipe's position. Because of this bug, it moves around pipe0, pipe2, pipe3 ... even though it requested pipe1, pipe2, pipe3... This patch modifies it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index 08786c0..3d80c7b 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -54,7 +54,7 @@ struct usbhs_pipe_info { * pipe list */ #define __usbhs_for_each_pipe(start, pos, info, i) \ - for (i = start, pos = (info)->pipe; \ + for (i = start, pos = (info)->pipe + i; \ i < (info)->size; \ i++, pos = (info)->pipe + i) -- cgit v0.10.2 From d5c6a1e024dd5acd6ad2e1a6eb6a2fd5c15c50f1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 11 Oct 2012 21:49:38 -0700 Subject: usb: renesas_usbhs: fixup interrupt status clear method When interrupt happened, renesas_usbhs driver gets irq status by usbhs_status_get_each_irq(), and cleared all status by using 0. But, this method is incorrect, since extra interrupt might occur between them. This patch cleared corresponding bits only Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 35c5208..61933a9 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -273,9 +273,9 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC); usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); - usbhs_write(priv, BRDYSTS, 0); - usbhs_write(priv, NRDYSTS, 0); - usbhs_write(priv, BEMPSTS, 0); + usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); + usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); + usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); /* * call irq callback functions -- cgit v0.10.2 From 69da85edbab5cd42909d3ba65b3dad1c1fb40206 Mon Sep 17 00:00:00 2001 From: Alexandre Pereira da Silva Date: Mon, 15 Oct 2012 09:47:35 -0300 Subject: usb: gadget: lpc32xx_udc: Fix compatibility with STOTG04 The STOTG04 is an replacement for ISP1301. Most of the registers on STOTG04 are the same as on ISP1301, but the register ISP1301_I2C_OTG_CONTROL_2 (address 0x10) doesn't exist on the ST part. This is a work around for this by using the interrupt source register that should behave the same on both parts and has the needed information. Tested-by: Roland Stigge Signed-off-by: Alexandre Pereira da Silva Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index f696fb9..21a9861 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -2930,10 +2930,10 @@ static void vbus_work(struct work_struct *work) /* Get the VBUS status from the transceiver */ value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client, - ISP1301_I2C_OTG_CONTROL_2); + ISP1301_I2C_INTERRUPT_SOURCE); /* VBUS on or off? */ - if (value & OTG_B_SESS_VLD) + if (value & INT_SESS_VLD) udc->vbus = 1; else udc->vbus = 0; -- cgit v0.10.2 From 78bef24e8477653853eb028dfc18471f05e54955 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Mon, 8 Oct 2012 11:33:05 +0100 Subject: MAINTAINERS: Add EFI git repository location People keep asking for the whereabouts of this git tree, so add it to MAINTAINERS. Signed-off-by: Matt Fleming diff --git a/MAINTAINERS b/MAINTAINERS index e73060f..fe95ef1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2801,6 +2801,7 @@ F: sound/usb/misc/ua101.c EXTENSIBLE FIRMWARE INTERFACE (EFI) M: Matt Fleming L: linux-efi@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git S: Maintained F: Documentation/x86/efi-stub.txt F: arch/ia64/kernel/efi.c -- cgit v0.10.2 From c2ff5cf5294bcbd7fa50f7d860e90a66db7e5059 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 16 Oct 2012 14:52:51 +0200 Subject: iommu/amd: Work around wrong IOAPIC device-id in IVRS table On some systems the BIOS puts the wrong device-id for the IO-APIC into the IVRS table. The result is that interrupt remapping is not working for the IO-APIC irqs. This usually means a kernel panic at boot because the timer is not working. Fix this kernel panic by disabling interrupt remapping if this problem is discovered in the IVRS table. Reported-by: Andrew Oakley Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 18b0d99..81837b0 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1599,21 +1599,46 @@ static void __init free_on_init_error(void) #endif } +/* SB IOAPIC is always on this device in AMD systems */ +#define IOAPIC_SB_DEVID ((0x00 << 8) | PCI_DEVFN(0x14, 0)) + static bool __init check_ioapic_information(void) { + bool ret, has_sb_ioapic; int idx; - for (idx = 0; idx < nr_ioapics; idx++) { - int id = mpc_ioapic_id(idx); + has_sb_ioapic = false; + ret = false; - if (get_ioapic_devid(id) < 0) { - pr_err(FW_BUG "AMD-Vi: IO-APIC[%d] not in IVRS table\n", id); - pr_err("AMD-Vi: Disabling interrupt remapping due to BIOS Bug\n"); - return false; + for (idx = 0; idx < nr_ioapics; idx++) { + int devid, id = mpc_ioapic_id(idx); + + devid = get_ioapic_devid(id); + if (devid < 0) { + pr_err(FW_BUG "AMD-Vi: IOAPIC[%d] not in IVRS table\n", id); + ret = false; + } else if (devid == IOAPIC_SB_DEVID) { + has_sb_ioapic = true; + ret = true; } } - return true; + if (!has_sb_ioapic) { + /* + * We expect the SB IOAPIC to be listed in the IVRS + * table. The system timer is connected to the SB IOAPIC + * and if we don't have it in the list the system will + * panic at boot time. This situation usually happens + * when the BIOS is buggy and provides us the wrong + * device id for the IOAPIC in the system. + */ + pr_err(FW_BUG "AMD-Vi: No southbridge IOAPIC found in IVRS table\n"); + } + + if (!ret) + pr_err("AMD-Vi: Disabling interrupt remapping due to BIOS Bug(s)\n"); + + return ret; } static void __init free_dma_resources(void) -- cgit v0.10.2 From 8f7b8db6e0557c8437adf9371e020cd89a7e85dc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 25 Sep 2012 16:40:12 +0200 Subject: iwlwifi: fix 6000 series channel switch command The channel switch command for 6000 series devices is larger than the maximum inline command size of 320 bytes. The command is therefore refused with a warning. Fix this by allocating the command and using the NOCOPY mechanism. Cc: stable@kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c index 349c205..da58620 100644 --- a/drivers/net/wireless/iwlwifi/dvm/devices.c +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c @@ -518,7 +518,7 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, * See iwlagn_mac_channel_switch. */ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl6000_channel_switch_cmd cmd; + struct iwl6000_channel_switch_cmd *cmd; u32 switch_time_in_usec, ucode_switch_time; u16 ch; u32 tsf_low; @@ -527,18 +527,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, struct ieee80211_vif *vif = ctx->vif; struct iwl_host_cmd hcmd = { .id = REPLY_CHANNEL_SWITCH, - .len = { sizeof(cmd), }, + .len = { sizeof(*cmd), }, .flags = CMD_SYNC, - .data = { &cmd, }, + .dataflags[0] = IWL_HCMD_DFL_NOCOPY, }; + int err; - cmd.band = priv->band == IEEE80211_BAND_2GHZ; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + hcmd.data[0] = cmd; + + cmd->band = priv->band == IEEE80211_BAND_2GHZ; ch = ch_switch->channel->hw_value; IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", ctx->active.channel, ch); - cmd.channel = cpu_to_le16(ch); - cmd.rxon_flags = ctx->staging.flags; - cmd.rxon_filter_flags = ctx->staging.filter_flags; + cmd->channel = cpu_to_le16(ch); + cmd->rxon_flags = ctx->staging.flags; + cmd->rxon_filter_flags = ctx->staging.filter_flags; switch_count = ch_switch->count; tsf_low = ch_switch->timestamp & 0x0ffffffff; /* @@ -554,23 +561,25 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, switch_count = 0; } if (switch_count <= 1) - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); + cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time); else { switch_time_in_usec = vif->bss_conf.beacon_int * switch_count * TIME_UNIT; ucode_switch_time = iwl_usecs_to_beacons(priv, switch_time_in_usec, beacon_interval); - cmd.switch_time = iwl_add_beacon_time(priv, - priv->ucode_beacon_time, - ucode_switch_time, - beacon_interval); + cmd->switch_time = iwl_add_beacon_time(priv, + priv->ucode_beacon_time, + ucode_switch_time, + beacon_interval); } IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", - cmd.switch_time); - cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; + cmd->switch_time); + cmd->expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; - return iwl_dvm_send_cmd(priv, &hcmd); + err = iwl_dvm_send_cmd(priv, &hcmd); + kfree(cmd); + return err; } struct iwl_lib_ops iwl6000_lib = { -- cgit v0.10.2 From 1342798cc13e3b48d9b5738f0c8fa812ccea8101 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 13 Sep 2012 14:59:13 -0600 Subject: perf tool: Precise mode requires exclude_guest Summary of events per Peter: "Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. AMB IBS does work but doesn't currently support exclude_* at all, setting an exclude_* bit will make it fail." This patch handles userspace perf command, setting the exclude_guest attribute if precise mode is requested, but only if a user has not specified a request for guest or host only profiling (G or H attribute). Kernel side AMD currently ignores all exclude_* bits, so there is no impact to existing IBS code paths. Robert Richter has a patch where IBS code will return EINVAL if an exclude_* bit is set. When this goes in it means use of :p on AMD with IBS will first fail with EINVAL (because exclude_guest will be set). Then the existing fallback code within perf will unset exclude_guest and try again. The second attempt will succeed if the CPU supports IBS profiling. Signed-off-by: David Ahern Acked-by: Peter Zijlstra Acked-by: Robert Richter Tested-by: Robert Richter Reviewed-by: Robert Richter Cc: Avi Kivity Cc: Gleb Natapov Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Robert Richter Link: http://lkml.kernel.org/r/1347569955-54626-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index aed38e4..75c7b0f 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -690,6 +690,9 @@ static int get_event_modifier(struct event_modifier *mod, char *str, eH = 0; } else if (*str == 'p') { precise++; + /* use of precise requires exclude_guest */ + if (!exclude_GH) + eG = 1; } else break; -- cgit v0.10.2 From 20b279ddb38ca42f8863cec07b4d45ec24589f13 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 13 Sep 2012 14:59:14 -0600 Subject: perf: Require exclude_guest to use PEBS - kernel side enforcement Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. This patch enforces exclude_guest kernel side. Signed-off-by: Peter Zijlstra Cc: Avi Kivity Cc: David Ahern Cc: Gleb Natapov Cc: Ingo Molnar Cc: Robert Richter Link: http://lkml.kernel.org/r/1347569955-54626-3-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern Signed-off-by: Arnaldo Carvalho de Melo diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 915b876..3373f84 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -338,6 +338,9 @@ int x86_setup_perfctr(struct perf_event *event) /* BTS is currently only allowed for user-mode. */ if (!attr->exclude_kernel) return -EOPNOTSUPP; + + if (!attr->exclude_guest) + return -EOPNOTSUPP; } hwc->config |= config; @@ -380,6 +383,9 @@ int x86_pmu_hw_config(struct perf_event *event) if (event->attr.precise_ip) { int precise = 0; + if (!event->attr.exclude_guest) + return -EOPNOTSUPP; + /* Support for constant skid */ if (x86_pmu.pebs_active && !x86_pmu.pebs_broken) { precise++; -- cgit v0.10.2 From 1f04661fde9deda4a2cd5845258715a22d8af197 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Oct 2012 16:52:26 +0200 Subject: ALSA: hda - Stop LPIB delay counting on broken hardware If LPIB reports a pretty bad value, we can't trust such hardware for calculating the PCM delay. Automatically turn off the delay counting when such a problem is encountered. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48911 Cc: [v3.6] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index ecf2775..72b085a 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2158,9 +2158,12 @@ static unsigned int azx_get_position(struct azx *chip, if (delay < 0) delay += azx_dev->bufsize; if (delay >= azx_dev->period_bytes) { - snd_printdd("delay %d > period_bytes %d\n", - delay, azx_dev->period_bytes); - delay = 0; /* something is wrong */ + snd_printk(KERN_WARNING SFX + "Unstable LPIB (%d >= %d); " + "disabling LPIB delay counting\n", + delay, azx_dev->period_bytes); + delay = 0; + chip->driver_caps &= ~AZX_DCAPS_COUNT_LPIB_DELAY; } azx_dev->substream->runtime->delay = bytes_to_frames(azx_dev->substream->runtime, delay); -- cgit v0.10.2 From ffe10c6f95412da01695e659e967747333d5e812 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 15 Oct 2012 12:39:42 +0900 Subject: perf tools: Fix segfault when using srcline sort key The srcline sort key is for grouping samples based on their source file and line number. It use addr2line tool to get the information but it requires dso name. It caused a segfault when a sample does not have the name by dereferencing a NULL pointer. Fix it by using raw ip addresses for those samples. Signed-off-by: Namhyung Kim Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1350272383-7016-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c index b5b1b92..dd68f11 100644 --- a/tools/perf/util/sort.c +++ b/tools/perf/util/sort.c @@ -260,6 +260,9 @@ static int hist_entry__srcline_snprintf(struct hist_entry *self, char *bf, if (path != NULL) goto out_path; + if (!self->ms.map) + goto out_ip; + snprintf(cmd, sizeof(cmd), "addr2line -e %s %016" PRIx64, self->ms.map->dso->long_name, self->ip); fp = popen(cmd, "r"); -- cgit v0.10.2 From 88481b6b33d6cb5edb57e5794abae4daeabd08c5 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 15 Oct 2012 12:39:43 +0900 Subject: perf tools: Remove warnings on JIT samples for srcline sort key When using the srcline sort key with perf report, I see many lines of warning related to JIT samples like below: addr2line: '/tmp/perf-1397.map': No such file Since it's not a ELF binary and doesn't provide such information, just use the raw ip address. Signed-off-by: Namhyung Kim Cc: David Ahern Cc: Ingo Molnar Cc: Irina Tirdea Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1350272383-7016-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c index dd68f11..cfd1c0f 100644 --- a/tools/perf/util/sort.c +++ b/tools/perf/util/sort.c @@ -263,6 +263,9 @@ static int hist_entry__srcline_snprintf(struct hist_entry *self, char *bf, if (!self->ms.map) goto out_ip; + if (!strncmp(self->ms.map->dso->long_name, "/tmp/perf-", 10)) + goto out_ip; + snprintf(cmd, sizeof(cmd), "addr2line -e %s %016" PRIx64, self->ms.map->dso->long_name, self->ip); fp = popen(cmd, "r"); -- cgit v0.10.2 From 63a1a3d820c619a4dab1781cc16c110a284efded Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 15 Oct 2012 18:14:35 -0300 Subject: perf hists browser: Fix off-by-two bug on the first column The commit 5395a04841fc ("perf hists: Separate overhead and baseline columns") makes the "Overhead" column no more the first one. So it resulted in the mis-aligned column in the normal (non-diff) output. Signed-off-by: Namhyung Kim Reported-by: Markus Trippelsdorf Acked-by: Jiri Olsa Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/None Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 0568536..fe4430a 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -610,6 +610,7 @@ static int hist_browser__show_entry(struct hist_browser *browser, char folded_sign = ' '; bool current_entry = ui_browser__is_current_entry(&browser->b, row); off_t row_offset = entry->row_offset; + bool first = true; if (current_entry) { browser->he_selection = entry; @@ -633,10 +634,11 @@ static int hist_browser__show_entry(struct hist_browser *browser, if (!perf_hpp__format[i].cond) continue; - if (i) { + if (!first) { slsmg_printf(" "); width -= 2; } + first = false; if (perf_hpp__format[i].color) { hpp.ptr = &percent; -- cgit v0.10.2 From 101782ea2c6984cf169631c59df76b8497899caf Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 1 Oct 2012 20:13:51 -0400 Subject: lib tools traceevent: Add back pevent assignment in __pevent_parse_format() Even though with the change of commit commit 2b29175 "tools lib traceevent: Carve out events format parsing routine", allowed __pevent_parse_format() to parse an event without the need of a pevent handler, the event still needs to assign the pevent handed to it. There's no problem with assigning it if the pevent is NULL, as the event->pevent would be NULL without the assignment. But function parsing handlers may be assigned to the pevent handler to help in parsing the event. If there's no pevent then there would not be any function handlers, but if the pevent isn't assigned first before parsing the event, it wont honor the function handlers that were assigned. Worse yet, the current code crashes if an event has a function that it tries to parse. For example: # perf record -e scsi:scsi_dispatch_cmd_timeout Segmentation fault (core dumped) This happens because the scsi_dispatch_cmd_timeout event format has the following: scsi_trace_parse_cdb(p, __get_dynamic_array(cmnd), REC->cmd_len) which hasn't been defined by the pevent code. Signed-off-by: Steven Rostedt Reviewed-by: Namhyung Kim Cc: Ingo Molnar Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1349136831.22822.133.camel@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 47264b4..f2989c5 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -2602,6 +2602,9 @@ find_func_handler(struct pevent *pevent, char *func_name) { struct pevent_function_handler *func; + if (!pevent) + return NULL; + for (func = pevent->func_handlers; func; func = func->next) { if (strcmp(func->name, func_name) == 0) break; @@ -4938,6 +4941,9 @@ enum pevent_errno __pevent_parse_format(struct event_format **eventp, goto event_alloc_failed; } + /* Add pevent to event so that it can be referenced */ + event->pevent = pevent; + ret = event_read_format(event); if (ret < 0) { ret = PEVENT_ERRNO__READ_FORMAT_FAILED; @@ -5041,9 +5047,6 @@ enum pevent_errno pevent_parse_event(struct pevent *pevent, const char *buf, if (event == NULL) return ret; - /* Add pevent to event so that it can be referenced */ - event->pevent = pevent; - if (add_event(pevent, event)) { ret = PEVENT_ERRNO__MEM_ALLOC_FAILED; goto event_add_failed; -- cgit v0.10.2 From 743df75ff10630f1f2a461f0f4b51f601f53ec44 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 1 Oct 2012 20:23:28 -0400 Subject: tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter Some of args were missed in free_args(), as well as subargs. That is args like FILTER_ARG_NUM have left and right pointers to other args that also need to be freed. Signed-off-by: Steven Rostedt Cc: Ingo Molnar Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1349137408.22822.135.camel@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/lib/traceevent/parse-filter.c b/tools/lib/traceevent/parse-filter.c index ad17855..5ea4326 100644 --- a/tools/lib/traceevent/parse-filter.c +++ b/tools/lib/traceevent/parse-filter.c @@ -209,7 +209,16 @@ static void free_arg(struct filter_arg *arg) switch (arg->type) { case FILTER_ARG_NONE: case FILTER_ARG_BOOLEAN: + break; + case FILTER_ARG_NUM: + free_arg(arg->num.left); + free_arg(arg->num.right); + break; + + case FILTER_ARG_EXP: + free_arg(arg->exp.left); + free_arg(arg->exp.right); break; case FILTER_ARG_STR: @@ -218,6 +227,12 @@ static void free_arg(struct filter_arg *arg) free(arg->str.buffer); break; + case FILTER_ARG_VALUE: + if (arg->value.type == FILTER_STRING || + arg->value.type == FILTER_CHAR) + free(arg->value.str); + break; + case FILTER_ARG_OP: free_arg(arg->op.left); free_arg(arg->op.right); -- cgit v0.10.2 From 086e47b6c959ee557e9adefe72b8800c62d0ac34 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 13 Oct 2012 09:25:58 +0100 Subject: arm64: Remove duplicate inclusion of mmu_context.h in smp.c asm/mmu_context.h was included twice. Signed-off-by: Sachin Kamat Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index b711525..226b6bf 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -46,7 +46,6 @@ #include #include #include -#include /* * as from 2.5, kernels no longer have an init_tasks structure -- cgit v0.10.2 From 916ca14aaf12a7191118adb51bb95e3c7866380d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Oct 2012 09:34:01 -0700 Subject: sparc64: Add global PMU register dumping via sysrq. Signed-off-by: David S. Miller diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt index 642f844..2a4cdda 100644 --- a/Documentation/sysrq.txt +++ b/Documentation/sysrq.txt @@ -116,6 +116,7 @@ On all - write a character to /proc/sysrq-trigger. e.g.: 'w' - Dumps tasks that are in uninterruptable (blocked) state. 'x' - Used by xmon interface on ppc/powerpc platforms. + Show global PMU Registers on sparc64. 'y' - Show global CPU Registers [SPARC-64 specific] diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h index 0c6f6b0..da43bdc 100644 --- a/arch/sparc/include/asm/ptrace.h +++ b/arch/sparc/include/asm/ptrace.h @@ -42,7 +42,18 @@ struct global_reg_snapshot { struct thread_info *thread; unsigned long pad1; }; -extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; + +struct global_pmu_snapshot { + unsigned long pcr[4]; + unsigned long pic[4]; +}; + +union global_cpu_snapshot { + struct global_reg_snapshot reg; + struct global_pmu_snapshot pmu; +}; + +extern union global_cpu_snapshot global_cpu_snapshot[NR_CPUS]; #define force_successful_syscall_return() \ do { current_thread_info()->syscall_noerror = 1; \ diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h index 29862a9..dd3bef4 100644 --- a/arch/sparc/include/asm/smp_64.h +++ b/arch/sparc/include/asm/smp_64.h @@ -48,6 +48,7 @@ extern void smp_fill_in_sib_core_maps(void); extern void cpu_play_dead(void); extern void smp_fetch_global_regs(void); +extern void smp_fetch_global_pmu(void); struct seq_file; void smp_bogo(struct seq_file *); @@ -65,6 +66,7 @@ extern void __cpu_die(unsigned int cpu); #define hard_smp_processor_id() 0 #define smp_fill_in_sib_core_maps() do { } while (0) #define smp_fetch_global_regs() do { } while (0) +#define smp_fetch_global_pmu() do { } while (0) #endif /* !(CONFIG_SMP) */ diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index fcaa594..d778248 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,7 @@ #include #include #include +#include #include "kstack.h" @@ -204,18 +206,22 @@ void show_regs(struct pt_regs *regs) show_stack(current, (unsigned long *) regs->u_regs[UREG_FP]); } -struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; -static DEFINE_SPINLOCK(global_reg_snapshot_lock); +union global_cpu_snapshot global_cpu_snapshot[NR_CPUS]; +static DEFINE_SPINLOCK(global_cpu_snapshot_lock); static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, int this_cpu) { + struct global_reg_snapshot *rp; + flushw_all(); - global_reg_snapshot[this_cpu].tstate = regs->tstate; - global_reg_snapshot[this_cpu].tpc = regs->tpc; - global_reg_snapshot[this_cpu].tnpc = regs->tnpc; - global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7]; + rp = &global_cpu_snapshot[this_cpu].reg; + + rp->tstate = regs->tstate; + rp->tpc = regs->tpc; + rp->tnpc = regs->tnpc; + rp->o7 = regs->u_regs[UREG_I7]; if (regs->tstate & TSTATE_PRIV) { struct reg_window *rw; @@ -223,17 +229,17 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, rw = (struct reg_window *) (regs->u_regs[UREG_FP] + STACK_BIAS); if (kstack_valid(tp, (unsigned long) rw)) { - global_reg_snapshot[this_cpu].i7 = rw->ins[7]; + rp->i7 = rw->ins[7]; rw = (struct reg_window *) (rw->ins[6] + STACK_BIAS); if (kstack_valid(tp, (unsigned long) rw)) - global_reg_snapshot[this_cpu].rpc = rw->ins[7]; + rp->rpc = rw->ins[7]; } } else { - global_reg_snapshot[this_cpu].i7 = 0; - global_reg_snapshot[this_cpu].rpc = 0; + rp->i7 = 0; + rp->rpc = 0; } - global_reg_snapshot[this_cpu].thread = tp; + rp->thread = tp; } /* In order to avoid hangs we do not try to synchronize with the @@ -261,9 +267,9 @@ void arch_trigger_all_cpu_backtrace(void) if (!regs) regs = tp->kregs; - spin_lock_irqsave(&global_reg_snapshot_lock, flags); + spin_lock_irqsave(&global_cpu_snapshot_lock, flags); - memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot)); + memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot)); this_cpu = raw_smp_processor_id(); @@ -272,7 +278,7 @@ void arch_trigger_all_cpu_backtrace(void) smp_fetch_global_regs(); for_each_online_cpu(cpu) { - struct global_reg_snapshot *gp = &global_reg_snapshot[cpu]; + struct global_reg_snapshot *gp = &global_cpu_snapshot[cpu].reg; __global_reg_poll(gp); @@ -295,9 +301,9 @@ void arch_trigger_all_cpu_backtrace(void) } } - memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot)); + memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot)); - spin_unlock_irqrestore(&global_reg_snapshot_lock, flags); + spin_unlock_irqrestore(&global_cpu_snapshot_lock, flags); } #ifdef CONFIG_MAGIC_SYSRQ @@ -309,16 +315,90 @@ static void sysrq_handle_globreg(int key) static struct sysrq_key_op sparc_globalreg_op = { .handler = sysrq_handle_globreg, - .help_msg = "Globalregs", + .help_msg = "global-regs(Y)", .action_msg = "Show Global CPU Regs", }; -static int __init sparc_globreg_init(void) +static void __global_pmu_self(int this_cpu) +{ + struct global_pmu_snapshot *pp; + int i, num; + + pp = &global_cpu_snapshot[this_cpu].pmu; + + num = 1; + if (tlb_type == hypervisor && + sun4v_chip_type >= SUN4V_CHIP_NIAGARA4) + num = 4; + + for (i = 0; i < num; i++) { + pp->pcr[i] = pcr_ops->read_pcr(i); + pp->pic[i] = pcr_ops->read_pic(i); + } +} + +static void __global_pmu_poll(struct global_pmu_snapshot *pp) +{ + int limit = 0; + + while (!pp->pcr[0] && ++limit < 100) { + barrier(); + udelay(1); + } +} + +static void pmu_snapshot_all_cpus(void) { - return register_sysrq_key('y', &sparc_globalreg_op); + unsigned long flags; + int this_cpu, cpu; + + spin_lock_irqsave(&global_cpu_snapshot_lock, flags); + + memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot)); + + this_cpu = raw_smp_processor_id(); + + __global_pmu_self(this_cpu); + + smp_fetch_global_pmu(); + + for_each_online_cpu(cpu) { + struct global_pmu_snapshot *pp = &global_cpu_snapshot[cpu].pmu; + + __global_pmu_poll(pp); + + printk("%c CPU[%3d]: PCR[%08lx:%08lx:%08lx:%08lx] PIC[%08lx:%08lx:%08lx:%08lx]\n", + (cpu == this_cpu ? '*' : ' '), cpu, + pp->pcr[0], pp->pcr[1], pp->pcr[2], pp->pcr[3], + pp->pic[0], pp->pic[1], pp->pic[2], pp->pic[3]); + } + + memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot)); + + spin_unlock_irqrestore(&global_cpu_snapshot_lock, flags); +} + +static void sysrq_handle_globpmu(int key) +{ + pmu_snapshot_all_cpus(); +} + +static struct sysrq_key_op sparc_globalpmu_op = { + .handler = sysrq_handle_globpmu, + .help_msg = "global-pmu(X)", + .action_msg = "Show Global PMU Regs", +}; + +static int __init sparc_sysrq_init(void) +{ + int ret = register_sysrq_key('y', &sparc_globalreg_op); + + if (!ret) + ret = register_sysrq_key('x', &sparc_globalpmu_op); + return ret; } -core_initcall(sparc_globreg_init); +core_initcall(sparc_sysrq_init); #endif diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 781bcb1..d94b878 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -852,6 +852,8 @@ extern unsigned long xcall_flush_tlb_mm; extern unsigned long xcall_flush_tlb_pending; extern unsigned long xcall_flush_tlb_kernel_range; extern unsigned long xcall_fetch_glob_regs; +extern unsigned long xcall_fetch_glob_pmu; +extern unsigned long xcall_fetch_glob_pmu_n4; extern unsigned long xcall_receive_signal; extern unsigned long xcall_new_mmu_context_version; #ifdef CONFIG_KGDB @@ -1000,6 +1002,15 @@ void smp_fetch_global_regs(void) smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0); } +void smp_fetch_global_pmu(void) +{ + if (tlb_type == hypervisor && + sun4v_chip_type >= SUN4V_CHIP_NIAGARA4) + smp_cross_call(&xcall_fetch_glob_pmu_n4, 0, 0, 0); + else + smp_cross_call(&xcall_fetch_glob_pmu, 0, 0, 0); +} + /* We know that the window frames of the user have been flushed * to the stack before we get here because all callers of us * are flush_tlb_*() routines, and these run after flush_cache_*() diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S index 874162a..f8e13d4 100644 --- a/arch/sparc/mm/ultra.S +++ b/arch/sparc/mm/ultra.S @@ -481,8 +481,8 @@ xcall_sync_tick: .globl xcall_fetch_glob_regs xcall_fetch_glob_regs: - sethi %hi(global_reg_snapshot), %g1 - or %g1, %lo(global_reg_snapshot), %g1 + sethi %hi(global_cpu_snapshot), %g1 + or %g1, %lo(global_cpu_snapshot), %g1 __GET_CPUID(%g2) sllx %g2, 6, %g3 add %g1, %g3, %g1 @@ -509,6 +509,66 @@ xcall_fetch_glob_regs: stx %g3, [%g1 + GR_SNAP_THREAD] retry + .globl xcall_fetch_glob_pmu +xcall_fetch_glob_pmu: + sethi %hi(global_cpu_snapshot), %g1 + or %g1, %lo(global_cpu_snapshot), %g1 + __GET_CPUID(%g2) + sllx %g2, 6, %g3 + add %g1, %g3, %g1 + rd %pic, %g7 + stx %g7, [%g1 + (4 * 8)] + rd %pcr, %g7 + stx %g7, [%g1 + (0 * 8)] + retry + + .globl xcall_fetch_glob_pmu_n4 +xcall_fetch_glob_pmu_n4: + sethi %hi(global_cpu_snapshot), %g1 + or %g1, %lo(global_cpu_snapshot), %g1 + __GET_CPUID(%g2) + sllx %g2, 6, %g3 + add %g1, %g3, %g1 + + ldxa [%g0] ASI_PIC, %g7 + stx %g7, [%g1 + (4 * 8)] + mov 0x08, %g3 + ldxa [%g3] ASI_PIC, %g7 + stx %g7, [%g1 + (5 * 8)] + mov 0x10, %g3 + ldxa [%g3] ASI_PIC, %g7 + stx %g7, [%g1 + (6 * 8)] + mov 0x18, %g3 + ldxa [%g3] ASI_PIC, %g7 + stx %g7, [%g1 + (7 * 8)] + + mov %o0, %g2 + mov %o1, %g3 + mov %o5, %g7 + + mov HV_FAST_VT_GET_PERFREG, %o5 + mov 3, %o0 + ta HV_FAST_TRAP + stx %o1, [%g1 + (3 * 8)] + mov HV_FAST_VT_GET_PERFREG, %o5 + mov 2, %o0 + ta HV_FAST_TRAP + stx %o1, [%g1 + (2 * 8)] + mov HV_FAST_VT_GET_PERFREG, %o5 + mov 1, %o0 + ta HV_FAST_TRAP + stx %o1, [%g1 + (1 * 8)] + mov HV_FAST_VT_GET_PERFREG, %o5 + mov 0, %o0 + ta HV_FAST_TRAP + stx %o1, [%g1 + (0 * 8)] + + mov %g2, %o0 + mov %g3, %o1 + mov %g7, %o5 + + retry + #ifdef DCACHE_ALIASING_POSSIBLE .align 32 .globl xcall_flush_dcache_page_cheetah diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 05728894..16ee6ce 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -452,6 +452,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { NULL, /* v */ &sysrq_showstate_blocked_op, /* w */ /* x: May be registered on ppc/powerpc for xmon */ + /* x: May be registered on sparc64 for global PMU dump */ NULL, /* x */ /* y: May be registered on sparc64 for global register dump */ NULL, /* y */ -- cgit v0.10.2 From d6aa6a81d41eb48125b4622306b61dd398923ad9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 16 Oct 2012 12:32:24 -0400 Subject: NFSv4: fs/nfs/nfs4getroot.c needs to include "internal.h" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a warning about "no previous prototype for ‘nfs4_get_rootfh’" Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4getroot.c b/fs/nfs/nfs4getroot.c index 6a83780..549462e 100644 --- a/fs/nfs/nfs4getroot.c +++ b/fs/nfs/nfs4getroot.c @@ -5,6 +5,7 @@ #include #include "nfs4_fs.h" +#include "internal.h" #define NFSDBG_FACILITY NFSDBG_CLIENT -- cgit v0.10.2 From 2e928e4878fbc6328c2b1fc897d008db257bfbb0 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 16 Oct 2012 12:34:56 -0400 Subject: NFSv4.1: Declare osd_pri_2_pnfs_err(), objio_init_read/write to be static Signed-off-by: Trond Myklebust diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index be731e6..c6f9906 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -369,7 +369,7 @@ void objio_free_result(struct objlayout_io_res *oir) kfree(objios); } -enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep) +static enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep) { switch (oep) { case OSD_ERR_PRI_NO_ERROR: @@ -574,7 +574,7 @@ static bool objio_pg_test(struct nfs_pageio_descriptor *pgio, (unsigned long)pgio->pg_layout_private; } -void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +static void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) { pnfs_generic_pg_init_read(pgio, req); if (unlikely(pgio->pg_lseg == NULL)) @@ -604,7 +604,7 @@ static bool aligned_on_raid_stripe(u64 offset, struct ore_layout *layout, return false; } -void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +static void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) { unsigned long stripe_end = 0; u64 wb_size; -- cgit v0.10.2 From 3d76f9f5d3f6c88c576ebd92c3e2edb6d6a27e6f Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 15 Oct 2012 16:48:04 +0800 Subject: ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog' Commit 9e3c0066 (ARM: dts: imx6q-arm2: add pinctrl for uart and enet) defines NANDF_CS pins as gpio in 'hog', assuming these two pins are always used by usdhc3 in gpio mode as card-detection and write-protection on ARM2 board. But it's not true. These pins are shared by usdhc3 and gpmi-nand. We should have the pins functional for gpmi-nand when usdhc3 is disabled. Move the pins out of 'hog', so that pins only work in gpio mode as CD and WP when usdhc3 is enabled, and otherwise they are available for gpmi-nand. Reported-by: Huang Shijie Signed-off-by: Shawn Guo Tested-by: Huang Shijie Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 15df4c1..5bfa02a 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -37,6 +37,13 @@ pinctrl_hog: hoggrp { fsl,pins = < 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + >; + }; + }; + + arm2 { + pinctrl_usdhc3_arm2: usdhc3grp-arm2 { + fsl,pins = < 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ >; @@ -58,7 +65,8 @@ wp-gpios = <&gpio6 14 0>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-0 = <&pinctrl_usdhc3_1 + &pinctrl_usdhc3_arm2>; status = "okay"; }; -- cgit v0.10.2 From 786621308cfbb9421a54773e57dbdbe504c417cc Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Tue, 16 Oct 2012 16:31:49 +0800 Subject: ARM: tegra30: clk: Fix output_rate overflow Change the type of variable from "unsigned long" to "u64". This avoids the overflow while clock rate calculating. Signed-off-by: Mark Zhang Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index 5cd502c..e9de5df 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -1199,7 +1199,7 @@ static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate, { struct clk_tegra *c = to_clk_tegra(hw); unsigned long input_rate = *prate; - unsigned long output_rate = *prate; + u64 output_rate = *prate; const struct clk_pll_freq_table *sel; struct clk_pll_freq_table cfg; int mul; -- cgit v0.10.2 From f2ef412d584ff9947f96990f08eaa1cf45ab8ca9 Mon Sep 17 00:00:00 2001 From: Sivaram Nair Date: Tue, 16 Oct 2012 13:08:35 +0300 Subject: ARM: tegra: rename tegra system timer The timer variable is renamed to avoid confusion and symbol name clash with the tegra_timer clock. Signed-off-by: Sivaram Nair Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 57e235f..aa5325c 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -182,7 +182,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") .init_early = tegra20_init_early, .init_irq = tegra_dt_init_irq, .handle_irq = gic_handle_irq, - .timer = &tegra_timer, + .timer = &tegra_sys_timer, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index e4a676d..5e92a81 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -89,7 +89,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") .init_early = tegra30_init_early, .init_irq = tegra_dt_init_irq, .handle_irq = gic_handle_irq, - .timer = &tegra_timer, + .timer = &tegra_sys_timer, .init_machine = tegra30_dt_init, .init_late = tegra_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index f88e514..91fbe73 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -55,5 +55,5 @@ static inline int harmony_pcie_init(void) { return 0; } void __init tegra_paz00_wifikill_init(void); -extern struct sys_timer tegra_timer; +extern struct sys_timer tegra_sys_timer; #endif diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index eccdce9..d3b8c8e 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -245,7 +245,7 @@ static void __init tegra_init_timer(void) register_persistent_clock(NULL, tegra_read_persistent_clock); } -struct sys_timer tegra_timer = { +struct sys_timer tegra_sys_timer = { .init = tegra_init_timer, }; -- cgit v0.10.2 From e9b7e91745fa9df94900c8ab08e633f336686098 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 16 Oct 2012 12:30:44 -0400 Subject: NFSv4: Fix the return value for nfs_callback_start_svc returning PTR_ERR(cb_info->task) just after we have set it to NULL looks like a typo... Signed-off-by: Trond Myklebust Cc: Stanislav Kinsbursky diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c index 9a521fb..5088b57 100644 --- a/fs/nfs/callback.c +++ b/fs/nfs/callback.c @@ -241,7 +241,7 @@ static int nfs_callback_start_svc(int minorversion, struct rpc_xprt *xprt, svc_exit_thread(cb_info->rqst); cb_info->rqst = NULL; cb_info->task = NULL; - return PTR_ERR(cb_info->task); + return ret; } dprintk("nfs_callback_up: service started\n"); return 0; -- cgit v0.10.2 From bf88ef883585ebc1a6c2369483833ed11ca7666c Mon Sep 17 00:00:00 2001 From: Sivaram Nair Date: Tue, 16 Oct 2012 13:08:36 +0300 Subject: ARM: tegra: add tegra_timer clock This undoes commit 20f4665 "ARM: tegra: remove tegra_timer from tegra_list_clks" by bringing back the tegra_timer clock. tegra_timer is indeed a clock (hidden by the PERIPH_CLK macro) which should be added to the tegra_list_clks. The above commit caused tegra_init_timer() failing to get the clk reference. Signed-off-by: Sivaram Nair [swarren: added the reverted commit's subject to this patch description] Signed-off-by: Stephen Warren diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c index cc9b5fd..8d398a3 100644 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c @@ -953,6 +953,7 @@ PERIPH_CLK(pcie_xclk, NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, static struct clk *tegra_list_clks[] = { &tegra_apbdma, &tegra_rtc, + &tegra_timer, &tegra_i2s1, &tegra_i2s2, &tegra_spdif_out, diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index d92cb55..3d2e553 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -1143,6 +1143,7 @@ struct clk *tegra_list_clks[] = { &tegra_apbdma, &tegra_rtc, &tegra_kbc, + &tegra_timer, &tegra_kfuse, &tegra_fuse, &tegra_fuse_burn, -- cgit v0.10.2 From 7bdce71822f471433dd3014692e9096996c7b5f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:52 +0200 Subject: USB: ark3116: fix NULL-pointer dereference Fix NULL-pointer dereference at release by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is NULL when release is called. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index cf2522c..bd50a8a4 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -125,9 +125,6 @@ static inline int calc_divisor(int bps) static int ark3116_attach(struct usb_serial *serial) { - struct usb_serial_port *port = serial->port[0]; - struct ark3116_private *priv; - /* make sure we have our end-points */ if ((serial->num_bulk_in == 0) || (serial->num_bulk_out == 0) || @@ -142,8 +139,15 @@ static int ark3116_attach(struct usb_serial *serial) return -EINVAL; } - priv = kzalloc(sizeof(struct ark3116_private), - GFP_KERNEL); + return 0; +} + +static int ark3116_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct ark3116_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -198,18 +202,15 @@ static int ark3116_attach(struct usb_serial *serial) return 0; } -static void ark3116_release(struct usb_serial *serial) +static int ark3116_port_remove(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct ark3116_private *priv = usb_get_serial_port_data(port); /* device is closed, so URBs and DMA should be down */ - - usb_set_serial_port_data(port, NULL); - mutex_destroy(&priv->hw_lock); - kfree(priv); + + return 0; } static void ark3116_init_termios(struct tty_struct *tty) @@ -723,7 +724,8 @@ static struct usb_serial_driver ark3116_device = { .id_table = id_table, .num_ports = 1, .attach = ark3116_attach, - .release = ark3116_release, + .port_probe = ark3116_port_probe, + .port_remove = ark3116_port_remove, .set_termios = ark3116_set_termios, .init_termios = ark3116_init_termios, .ioctl = ark3116_ioctl, -- cgit v0.10.2 From a9556040119a63d06fd5238d47f5b683fba4178b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:54 +0200 Subject: USB: cyberjack: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 2a7aecc..4ee77dc 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -55,9 +55,9 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ -static int cyberjack_startup(struct usb_serial *serial); static void cyberjack_disconnect(struct usb_serial *serial); -static void cyberjack_release(struct usb_serial *serial); +static int cyberjack_port_probe(struct usb_serial_port *port); +static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, struct usb_serial_port *port); static void cyberjack_close(struct usb_serial_port *port); @@ -83,9 +83,9 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, - .attach = cyberjack_startup, .disconnect = cyberjack_disconnect, - .release = cyberjack_release, + .port_probe = cyberjack_port_probe, + .port_remove = cyberjack_port_remove, .open = cyberjack_open, .close = cyberjack_close, .write = cyberjack_write, @@ -107,56 +107,45 @@ struct cyberjack_private { short wrsent; /* Data already sent */ }; -/* do some startup allocations not currently performed by usb_serial_probe() */ -static int cyberjack_startup(struct usb_serial *serial) +static int cyberjack_port_probe(struct usb_serial_port *port) { struct cyberjack_private *priv; - int i; + int result; - /* allocate the private data structure */ priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL); if (!priv) return -ENOMEM; - /* set initial values */ spin_lock_init(&priv->lock); priv->rdtodo = 0; priv->wrfilled = 0; priv->wrsent = 0; - usb_set_serial_port_data(serial->port[0], priv); - init_waitqueue_head(&serial->port[0]->write_wait); + usb_set_serial_port_data(port, priv); - for (i = 0; i < serial->num_ports; ++i) { - int result; - result = usb_submit_urb(serial->port[i]->interrupt_in_urb, - GFP_KERNEL); - if (result) - dev_err(&serial->dev->dev, - "usb_submit_urb(read int) failed\n"); - dev_dbg(&serial->dev->dev, "%s - usb_submit_urb(int urb)\n", - __func__); - } + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); return 0; } -static void cyberjack_disconnect(struct usb_serial *serial) +static int cyberjack_port_remove(struct usb_serial_port *port) { - int i; + struct cyberjack_private *priv; - for (i = 0; i < serial->num_ports; ++i) - usb_kill_urb(serial->port[i]->interrupt_in_urb); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } -static void cyberjack_release(struct usb_serial *serial) +static void cyberjack_disconnect(struct usb_serial *serial) { int i; - for (i = 0; i < serial->num_ports; ++i) { - /* My special items, the standard routines free my urbs */ - kfree(usb_get_serial_port_data(serial->port[i])); - } + for (i = 0; i < serial->num_ports; ++i) + usb_kill_urb(serial->port[i]->interrupt_in_urb); } static int cyberjack_open(struct tty_struct *tty, -- cgit v0.10.2 From fa919751a2d26a88140fc5810124dd81644efe51 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:53 +0200 Subject: USB: belkin_sa: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 9944942..ea29556 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -45,8 +45,8 @@ #define DRIVER_DESC "USB Belkin Serial converter driver" /* function prototypes for a Belkin USB Serial Adapter F5U103 */ -static int belkin_sa_startup(struct usb_serial *serial); -static void belkin_sa_release(struct usb_serial *serial); +static int belkin_sa_port_probe(struct usb_serial_port *port); +static int belkin_sa_port_remove(struct usb_serial_port *port); static int belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port); static void belkin_sa_close(struct usb_serial_port *port); @@ -88,8 +88,8 @@ static struct usb_serial_driver belkin_device = { .break_ctl = belkin_sa_break_ctl, .tiocmget = belkin_sa_tiocmget, .tiocmset = belkin_sa_tiocmset, - .attach = belkin_sa_startup, - .release = belkin_sa_release, + .port_probe = belkin_sa_port_probe, + .port_remove = belkin_sa_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -118,17 +118,15 @@ struct belkin_sa_private { (c), BELKIN_SA_SET_REQUEST_TYPE, \ (v), 0, NULL, 0, WDR_TIMEOUT) -/* do some startup allocations not currently performed by usb_serial_probe() */ -static int belkin_sa_startup(struct usb_serial *serial) +static int belkin_sa_port_probe(struct usb_serial_port *port) { - struct usb_device *dev = serial->dev; + struct usb_device *dev = port->serial->dev; struct belkin_sa_private *priv; - /* allocate the private data structure */ priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL); if (!priv) - return -1; /* error */ - /* set initial values for control structures */ + return -ENOMEM; + spin_lock_init(&priv->lock); priv->control_state = 0; priv->last_lsr = 0; @@ -140,18 +138,19 @@ static int belkin_sa_startup(struct usb_serial *serial) le16_to_cpu(dev->descriptor.bcdDevice), priv->bad_flow_control); - init_waitqueue_head(&serial->port[0]->write_wait); - usb_set_serial_port_data(serial->port[0], priv); + usb_set_serial_port_data(port, priv); return 0; } -static void belkin_sa_release(struct usb_serial *serial) +static int belkin_sa_port_remove(struct usb_serial_port *port) { - int i; + struct belkin_sa_private *priv; - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int belkin_sa_open(struct tty_struct *tty, -- cgit v0.10.2 From 4295fe7791a1b20c90cbaaa6f23f2fb94218b8a7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 15:47:20 +0200 Subject: USB: cp210x: fix port-data memory leak Fix port data memory leak by replacing port private data with serial private data. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. The private data is used to store the control interface number, but as this is the same for all ports on an interface it should be stored as usb-serial data anyway. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 28af5ac..eb033fc 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -162,7 +162,7 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -struct cp210x_port_private { +struct cp210x_serial_private { __u8 bInterfaceNumber; }; @@ -276,7 +276,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; - struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); __le32 *buf; int result, i, length; @@ -292,7 +292,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_INTERFACE_TO_HOST, 0x0000, - port_priv->bInterfaceNumber, buf, size, + spriv->bInterfaceNumber, buf, size, USB_CTRL_GET_TIMEOUT); /* Convert data into an array of integers */ @@ -323,7 +323,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; - struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); __le32 *buf; int result, i, length; @@ -345,13 +345,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_INTERFACE, 0x0000, - port_priv->bInterfaceNumber, buf, size, + spriv->bInterfaceNumber, buf, size, USB_CTRL_SET_TIMEOUT); } else { result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_INTERFACE, data[0], - port_priv->bInterfaceNumber, NULL, 0, + spriv->bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); } @@ -845,36 +845,30 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state) static int cp210x_startup(struct usb_serial *serial) { - struct cp210x_port_private *port_priv; - int i; + struct usb_host_interface *cur_altsetting; + struct cp210x_serial_private *spriv; /* cp210x buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); - for (i = 0; i < serial->num_ports; i++) { - port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); - if (!port_priv) - return -ENOMEM; + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; - port_priv->bInterfaceNumber = - serial->interface->cur_altsetting->desc.bInterfaceNumber; + cur_altsetting = serial->interface->cur_altsetting; + spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber; - usb_set_serial_port_data(serial->port[i], port_priv); - } + usb_set_serial_data(serial, spriv); return 0; } static void cp210x_release(struct usb_serial *serial) { - struct cp210x_port_private *port_priv; - int i; + struct cp210x_serial_private *spriv; - for (i = 0; i < serial->num_ports; i++) { - port_priv = usb_get_serial_port_data(serial->port[i]); - kfree(port_priv); - usb_set_serial_port_data(serial->port[i], NULL); - } + spriv = usb_get_serial_data(serial); + kfree(spriv); } module_usb_serial_driver(serial_drivers, id_table); -- cgit v0.10.2 From 8bf769eb5f6efc33f95088850f33fcc05d28b508 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 15:47:21 +0200 Subject: USB: pl2303: fix port-data memory leak Fix port-data memory leak by allocating and freeing port data in port_probe/remove rather than in attach/release, and by introducing serial private data to store the device type which is interface rather than port specific. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 892ebdc..6002419 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -133,12 +133,15 @@ enum pl2303_type { HX, /* HX version of the pl2303 chip */ }; +struct pl2303_serial_private { + enum pl2303_type type; +}; + struct pl2303_private { spinlock_t lock; wait_queue_head_t delta_msr_wait; u8 line_control; u8 line_status; - enum pl2303_type type; }; static int pl2303_vendor_read(__u16 value, __u16 index, @@ -167,14 +170,19 @@ static int pl2303_vendor_write(__u16 value, __u16 index, static int pl2303_startup(struct usb_serial *serial) { - struct pl2303_private *priv; + struct pl2303_serial_private *spriv; enum pl2303_type type = type_0; unsigned char *buf; - int i; + + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; buf = kmalloc(10, GFP_KERNEL); - if (buf == NULL) + if (!buf) { + kfree(spriv); return -ENOMEM; + } if (serial->dev->descriptor.bDeviceClass == 0x02) type = type_0; @@ -186,15 +194,8 @@ static int pl2303_startup(struct usb_serial *serial) type = type_1; dev_dbg(&serial->interface->dev, "device type: %d\n", type); - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL); - if (!priv) - goto cleanup; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); - priv->type = type; - usb_set_serial_port_data(serial->port[i], priv); - } + spriv->type = type; + usb_set_serial_data(serial, spriv); pl2303_vendor_read(0x8484, 0, serial, buf); pl2303_vendor_write(0x0404, 0, serial); @@ -213,15 +214,40 @@ static int pl2303_startup(struct usb_serial *serial) kfree(buf); return 0; +} -cleanup: - kfree(buf); - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; +static void pl2303_release(struct usb_serial *serial) +{ + struct pl2303_serial_private *spriv; + + spriv = usb_get_serial_data(serial); + kfree(spriv); +} + +static int pl2303_port_probe(struct usb_serial_port *port) +{ + struct pl2303_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int pl2303_port_remove(struct usb_serial_port *port) +{ + struct pl2303_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int set_control_lines(struct usb_device *dev, u8 value) @@ -240,6 +266,7 @@ static void pl2303_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag; @@ -323,7 +350,7 @@ static void pl2303_set_termios(struct tty_struct *tty, } if (baud > 1228800) { /* type_0, type_1 only support up to 1228800 baud */ - if (priv->type != HX) + if (spriv->type != HX) baud = 1228800; else if (baud > 6000000) baud = 6000000; @@ -426,7 +453,7 @@ static void pl2303_set_termios(struct tty_struct *tty, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CRTSCTS) { - if (priv->type == HX) + if (spriv->type == HX) pl2303_vendor_write(0x0, 0x61, serial); else pl2303_vendor_write(0x0, 0x41, serial); @@ -468,10 +495,10 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; - struct pl2303_private *priv = usb_get_serial_port_data(port); + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; - if (priv->type != HX) { + if (spriv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); } else { @@ -655,17 +682,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) dev_err(&port->dev, "error sending break = %d\n", result); } -static void pl2303_release(struct usb_serial *serial) -{ - int i; - struct pl2303_private *priv; - - for (i = 0; i < serial->num_ports; ++i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - } -} - static void pl2303_update_line_status(struct usb_serial_port *port, unsigned char *data, unsigned int actual_length) @@ -827,6 +843,8 @@ static struct usb_serial_driver pl2303_device = { .read_int_callback = pl2303_read_int_callback, .attach = pl2303_startup, .release = pl2303_release, + .port_probe = pl2303_port_probe, + .port_remove = pl2303_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v0.10.2 From db5c8b524444d4fc6b1f32d368a50a3729e50002 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 10 Oct 2012 14:10:21 -0400 Subject: USB: fix port probing and removal in garmin_gps This patch (as1615) fixes a bug in the Garmin USB serial driver. It uses attach, disconnect, and release routines to carry out actions that should be handled by port_probe and port_remove routines, because they access port-specific data. The bug causes an oops when the device in unplugged, because the private data for each port structure now gets erased when the port is unbound from the driver, resulting in a null-pointer dereference. Signed-off-by: Alan Stern Reported--by: Markus Schauler Tested-by: Markus Schauler Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 3ee9264..203358d 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1405,11 +1405,10 @@ static void timeout_handler(unsigned long data) -static int garmin_attach(struct usb_serial *serial) +static int garmin_port_probe(struct usb_serial_port *port) { - int status = 0; - struct usb_serial_port *port = serial->port[0]; - struct garmin_data *garmin_data_p = NULL; + int status; + struct garmin_data *garmin_data_p; garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { @@ -1434,22 +1433,14 @@ static int garmin_attach(struct usb_serial *serial) } -static void garmin_disconnect(struct usb_serial *serial) +static int garmin_port_remove(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); usb_kill_urb(port->interrupt_in_urb); del_timer_sync(&garmin_data_p->timer); -} - - -static void garmin_release(struct usb_serial *serial) -{ - struct usb_serial_port *port = serial->port[0]; - struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - kfree(garmin_data_p); + return 0; } @@ -1466,9 +1457,8 @@ static struct usb_serial_driver garmin_device = { .close = garmin_close, .throttle = garmin_throttle, .unthrottle = garmin_unthrottle, - .attach = garmin_attach, - .disconnect = garmin_disconnect, - .release = garmin_release, + .port_probe = garmin_port_probe, + .port_remove = garmin_port_remove, .write = garmin_write, .write_room = garmin_write_room, .write_bulk_callback = garmin_write_bulk_callback, -- cgit v0.10.2 From a48221a26e4914b7e2d8a1749b6115212bac8bee Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Tue, 16 Oct 2012 15:24:01 +0200 Subject: gpio-74x164: Fix buffer allocation size The new registers handling in the gpio-74x164 driver allocates chip->registers * 8 bytes where only one byte per register is necessary. This patch fixes this. Signed-off-by: Roland Stigge Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c index ed3e551..f05e542 100644 --- a/drivers/gpio/gpio-74x164.c +++ b/drivers/gpio/gpio-74x164.c @@ -153,7 +153,7 @@ static int __devinit gen_74x164_probe(struct spi_device *spi) } chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; - chip->buffer = devm_kzalloc(&spi->dev, chip->gpio_chip.ngpio, GFP_KERNEL); + chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL); if (!chip->buffer) { ret = -ENOMEM; goto exit_destroy; -- cgit v0.10.2 From 45525b26a46cd593cb72070304c4cd7c8391bd37 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 16 Oct 2012 13:30:07 -0400 Subject: fix a leak in replace_fd() users replace_fd() began with "eats a reference, tries to insert into descriptor table" semantics; at some point I'd switched it to much saner current behaviour ("try to insert into descriptor table, grabbing a new reference if inserted; caller should do fput() in any case"), but forgot to update the callers. Mea culpa... [Spotted by Pavel Roskin, who has really weird system with pipe-fed coredumps as part of what he considers a normal boot ;-)] Signed-off-by: Al Viro diff --git a/fs/coredump.c b/fs/coredump.c index fd37fac..ce47379 100644 --- a/fs/coredump.c +++ b/fs/coredump.c @@ -450,11 +450,12 @@ static int umh_pipe_setup(struct subprocess_info *info, struct cred *new) cp->file = files[1]; - replace_fd(0, files[0], 0); + err = replace_fd(0, files[0], 0); + fput(files[0]); /* and disallow core files too */ current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1}; - return 0; + return err; } void do_coredump(siginfo_t *siginfo, struct pt_regs *regs) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 24ab414..61a5336 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2132,18 +2132,14 @@ static inline void flush_unauthorized_files(const struct cred *cred, return; devnull = dentry_open(&selinux_null, O_RDWR, cred); - if (!IS_ERR(devnull)) { - /* replace all the matching ones with this */ - do { - replace_fd(n - 1, get_file(devnull), 0); - } while ((n = iterate_fd(files, n, match_file, cred)) != 0); + if (IS_ERR(devnull)) + devnull = NULL; + /* replace all the matching ones with this */ + do { + replace_fd(n - 1, devnull, 0); + } while ((n = iterate_fd(files, n, match_file, cred)) != 0); + if (devnull) fput(devnull); - } else { - /* just close all the matching ones */ - do { - replace_fd(n - 1, NULL, 0); - } while ((n = iterate_fd(files, n, match_file, cred)) != 0); - } } /* -- cgit v0.10.2 From bbc1096ad8e9875a025bbcf012605da49129e8b8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 15 Oct 2012 16:40:35 +0100 Subject: Unexport some bits of linux/fs.h There are some bits of linux/fs.h which are only used within the kernel and shouldn't be in the UAPI. Move these from uapi/linux/fs.h into linux/fs.h. Signed-off-by: David Howells Signed-off-by: Al Viro diff --git a/include/linux/fs.h b/include/linux/fs.h index 001c7cf..8b53931 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -64,6 +64,77 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset, ssize_t bytes, void *private, int ret, bool is_async); +#define MAY_EXEC 0x00000001 +#define MAY_WRITE 0x00000002 +#define MAY_READ 0x00000004 +#define MAY_APPEND 0x00000008 +#define MAY_ACCESS 0x00000010 +#define MAY_OPEN 0x00000020 +#define MAY_CHDIR 0x00000040 +/* called from RCU mode, don't block */ +#define MAY_NOT_BLOCK 0x00000080 + +/* + * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond + * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() + */ + +/* file is open for reading */ +#define FMODE_READ ((__force fmode_t)0x1) +/* file is open for writing */ +#define FMODE_WRITE ((__force fmode_t)0x2) +/* file is seekable */ +#define FMODE_LSEEK ((__force fmode_t)0x4) +/* file can be accessed using pread */ +#define FMODE_PREAD ((__force fmode_t)0x8) +/* file can be accessed using pwrite */ +#define FMODE_PWRITE ((__force fmode_t)0x10) +/* File is opened for execution with sys_execve / sys_uselib */ +#define FMODE_EXEC ((__force fmode_t)0x20) +/* File is opened with O_NDELAY (only set for block devices) */ +#define FMODE_NDELAY ((__force fmode_t)0x40) +/* File is opened with O_EXCL (only set for block devices) */ +#define FMODE_EXCL ((__force fmode_t)0x80) +/* File is opened using open(.., 3, ..) and is writeable only for ioctls + (specialy hack for floppy.c) */ +#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) +/* 32bit hashes as llseek() offset (for directories) */ +#define FMODE_32BITHASH ((__force fmode_t)0x200) +/* 64bit hashes as llseek() offset (for directories) */ +#define FMODE_64BITHASH ((__force fmode_t)0x400) + +/* + * Don't update ctime and mtime. + * + * Currently a special hack for the XFS open_by_handle ioctl, but we'll + * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. + */ +#define FMODE_NOCMTIME ((__force fmode_t)0x800) + +/* Expect random access pattern */ +#define FMODE_RANDOM ((__force fmode_t)0x1000) + +/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ +#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) + +/* File is opened with O_PATH; almost nothing can be done with it */ +#define FMODE_PATH ((__force fmode_t)0x4000) + +/* File was opened by fanotify and shouldn't generate fanotify events */ +#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) + +/* + * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector + * that indicates that they should check the contents of the iovec are + * valid, but not check the memory that the iovec elements + * points too. + */ +#define CHECK_IOVEC_ONLY -1 + +#define SEL_IN 1 +#define SEL_OUT 2 +#define SEL_EX 4 + /* * The below are the various read and write types that we support. Some of * them include behavioral modifiers that send information down to the @@ -1557,6 +1628,60 @@ struct super_operations { }; /* + * Inode flags - they have no relation to superblock flags now + */ +#define S_SYNC 1 /* Writes are synced at once */ +#define S_NOATIME 2 /* Do not update access times */ +#define S_APPEND 4 /* Append-only file */ +#define S_IMMUTABLE 8 /* Immutable file */ +#define S_DEAD 16 /* removed, but still open directory */ +#define S_NOQUOTA 32 /* Inode is not counted to quota */ +#define S_DIRSYNC 64 /* Directory modifications are synchronous */ +#define S_NOCMTIME 128 /* Do not update file c/mtime */ +#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ +#define S_PRIVATE 512 /* Inode is fs-internal */ +#define S_IMA 1024 /* Inode has an associated IMA struct */ +#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ +#define S_NOSEC 4096 /* no suid or xattr security attributes */ + +/* + * Note that nosuid etc flags are inode-specific: setting some file-system + * flags just means all the inodes inherit those flags by default. It might be + * possible to override it selectively if you really wanted to with some + * ioctl() that is not currently implemented. + * + * Exception: MS_RDONLY is always applied to the entire file system. + * + * Unfortunately, it is possible to change a filesystems flags with it mounted + * with files in use. This means that all of the inodes will not have their + * i_flags updated. Hence, i_flags no longer inherit the superblock mount + * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org + */ +#define __IS_FLG(inode, flg) ((inode)->i_sb->s_flags & (flg)) + +#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) +#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ + ((inode)->i_flags & S_SYNC)) +#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ + ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) +#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) +#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) +#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) + +#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) +#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) +#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) +#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) + +#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) +#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) +#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) +#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) +#define IS_IMA(inode) ((inode)->i_flags & S_IMA) +#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) +#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) + +/* * Inode state bits. Protected by inode->i_lock * * Three bits determine the dirty state of the inode, I_DIRTY_SYNC, @@ -1688,6 +1813,11 @@ int sync_inode_metadata(struct inode *inode, int wait); struct file_system_type { const char *name; int fs_flags; +#define FS_REQUIRES_DEV 1 +#define FS_BINARY_MOUNTDATA 2 +#define FS_HAS_SUBTYPE 4 +#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ +#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() during rename() internally. */ struct dentry *(*mount) (struct file_system_type *, int, const char *, void *); void (*kill_sb) (struct super_block *); diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 9fcc880..780d4c6 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -57,85 +57,6 @@ struct inodes_stat_t { #define NR_FILE 8192 /* this can well be larger on a larger system */ -#define MAY_EXEC 0x00000001 -#define MAY_WRITE 0x00000002 -#define MAY_READ 0x00000004 -#define MAY_APPEND 0x00000008 -#define MAY_ACCESS 0x00000010 -#define MAY_OPEN 0x00000020 -#define MAY_CHDIR 0x00000040 -/* called from RCU mode, don't block */ -#define MAY_NOT_BLOCK 0x00000080 - -/* - * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond - * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() - */ - -/* file is open for reading */ -#define FMODE_READ ((__force fmode_t)0x1) -/* file is open for writing */ -#define FMODE_WRITE ((__force fmode_t)0x2) -/* file is seekable */ -#define FMODE_LSEEK ((__force fmode_t)0x4) -/* file can be accessed using pread */ -#define FMODE_PREAD ((__force fmode_t)0x8) -/* file can be accessed using pwrite */ -#define FMODE_PWRITE ((__force fmode_t)0x10) -/* File is opened for execution with sys_execve / sys_uselib */ -#define FMODE_EXEC ((__force fmode_t)0x20) -/* File is opened with O_NDELAY (only set for block devices) */ -#define FMODE_NDELAY ((__force fmode_t)0x40) -/* File is opened with O_EXCL (only set for block devices) */ -#define FMODE_EXCL ((__force fmode_t)0x80) -/* File is opened using open(.., 3, ..) and is writeable only for ioctls - (specialy hack for floppy.c) */ -#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) -/* 32bit hashes as llseek() offset (for directories) */ -#define FMODE_32BITHASH ((__force fmode_t)0x200) -/* 64bit hashes as llseek() offset (for directories) */ -#define FMODE_64BITHASH ((__force fmode_t)0x400) - -/* - * Don't update ctime and mtime. - * - * Currently a special hack for the XFS open_by_handle ioctl, but we'll - * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. - */ -#define FMODE_NOCMTIME ((__force fmode_t)0x800) - -/* Expect random access pattern */ -#define FMODE_RANDOM ((__force fmode_t)0x1000) - -/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ -#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) - -/* File is opened with O_PATH; almost nothing can be done with it */ -#define FMODE_PATH ((__force fmode_t)0x4000) - -/* File was opened by fanotify and shouldn't generate fanotify events */ -#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) - -/* - * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector - * that indicates that they should check the contents of the iovec are - * valid, but not check the memory that the iovec elements - * points too. - */ -#define CHECK_IOVEC_ONLY -1 - -#define SEL_IN 1 -#define SEL_OUT 2 -#define SEL_EX 4 - -/* public flags for file_system_type */ -#define FS_REQUIRES_DEV 1 -#define FS_BINARY_MOUNTDATA 2 -#define FS_HAS_SUBTYPE 4 -#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ -#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() - * during rename() internally. - */ /* * These are the fs-independent mount-flags: up to 32 flags are supported @@ -181,59 +102,6 @@ struct inodes_stat_t { #define MS_MGC_VAL 0xC0ED0000 #define MS_MGC_MSK 0xffff0000 -/* Inode flags - they have nothing to superblock flags now */ - -#define S_SYNC 1 /* Writes are synced at once */ -#define S_NOATIME 2 /* Do not update access times */ -#define S_APPEND 4 /* Append-only file */ -#define S_IMMUTABLE 8 /* Immutable file */ -#define S_DEAD 16 /* removed, but still open directory */ -#define S_NOQUOTA 32 /* Inode is not counted to quota */ -#define S_DIRSYNC 64 /* Directory modifications are synchronous */ -#define S_NOCMTIME 128 /* Do not update file c/mtime */ -#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ -#define S_PRIVATE 512 /* Inode is fs-internal */ -#define S_IMA 1024 /* Inode has an associated IMA struct */ -#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ -#define S_NOSEC 4096 /* no suid or xattr security attributes */ - -/* - * Note that nosuid etc flags are inode-specific: setting some file-system - * flags just means all the inodes inherit those flags by default. It might be - * possible to override it selectively if you really wanted to with some - * ioctl() that is not currently implemented. - * - * Exception: MS_RDONLY is always applied to the entire file system. - * - * Unfortunately, it is possible to change a filesystems flags with it mounted - * with files in use. This means that all of the inodes will not have their - * i_flags updated. Hence, i_flags no longer inherit the superblock mount - * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org - */ -#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg)) - -#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) -#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ - ((inode)->i_flags & S_SYNC)) -#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ - ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) -#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) -#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) -#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) - -#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) -#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) -#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) -#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) - -#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) -#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) -#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) -#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) -#define IS_IMA(inode) ((inode)->i_flags & S_IMA) -#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) -#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) - /* the read-only stuff doesn't really belong here, but any other place is probably as bad and I don't want to create yet another include file. */ -- cgit v0.10.2 From c54d0dc35324300cdc502137f5c0ee44f53d7a8b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 16 Oct 2012 13:37:17 -0400 Subject: bury SEL_{IN,OUT,EX} Had not been used for more than a decade and half; it used to be a part of (in-kernel) ->select() API and it has been pining for fjords since 2.1.23pre1. This is an ex-parrot... Signed-off-by: Al Viro diff --git a/include/linux/fs.h b/include/linux/fs.h index 8b53931..b33cfc9 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -131,10 +131,6 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset, */ #define CHECK_IOVEC_ONLY -1 -#define SEL_IN 1 -#define SEL_OUT 2 -#define SEL_EX 4 - /* * The below are the various read and write types that we support. Some of * them include behavioral modifiers that send information down to the -- cgit v0.10.2 From 73b7656ce4e09eb137ee6f845a9e11a7f132df1c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Oct 2012 14:08:40 -0400 Subject: MAINTAINERS: Add explicit section for IPSEC networking. Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index e73060f..6d6632f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5019,6 +5019,20 @@ F: net/ipv6/ F: include/net/ip* F: arch/x86/net/* +NETWORKING [IPSEC] +M: Steffen Klassert +M: Herbert Xu +M: "David S. Miller" +L: netdev@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git +S: Maintained +F: net/xfrm/ +F: net/key/ +F: net/ipv4/xfrm* +F: net/ipv6/xfrm* +F: include/uapi/linux/xfrm.h +F: include/net/xfrm.h + NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK) M: Paul Moore L: netdev@vger.kernel.org -- cgit v0.10.2 From 3f216ef3f451f91d98dc5c69221a507e327eef3a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 16 Oct 2012 11:19:16 -0700 Subject: ARM: OMAP4: Fix twd_local_timer_register regression Commit 7d7e1eba (ARM: OMAP2+: Prepare for irqs.h removal) changed the interrupts to allow enabling sparse IRQ, but accidentally added the omap3 INTC base to the local IRQ. This causes the following: twd: can't register interrupt 45 (-22) twd_local_timer_register failed -22 The right fix is to not add any base, as it is a local timer. For the OMAP44XX_IRQ_LOCALWDT we had defined earlier there are no users, so no need to fix that. Reported-by: Russell King Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 44f9aa7..69e4663 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -467,7 +467,7 @@ OMAP_SYS_TIMER(3_am33xx) #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START); + OMAP44XX_LOCAL_TWD_BASE, 29); #endif static void __init omap4_timer_init(void) -- cgit v0.10.2 From 55462cf30ad9768fff6a6d36db21879146a39bdf Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 14 Oct 2012 04:30:56 +0000 Subject: vlan: fix bond/team enslave of vlan challenged slave/port In vlan_uses_dev() check for number of vlan devs rather than existence of vlan_info. The reason is that vlan id 0 is there without appropriate vlan dev on it by default which prevented from enslaving vlan challenged dev. Reported-by: Jon Stanley Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b721902..b2530b0 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1519,7 +1519,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) /* no need to lock since we're protected by rtnl_lock */ if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) { pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name); - if (bond_vlan_used(bond)) { + if (vlan_uses_dev(bond_dev)) { pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n", bond_dev->name, slave_dev->name, bond_dev->name); return -EPERM; diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index fbbf1fa..65e06ab 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -366,6 +366,13 @@ EXPORT_SYMBOL(vlan_vids_del_by_dev); bool vlan_uses_dev(const struct net_device *dev) { - return rtnl_dereference(dev->vlan_info) ? true : false; + struct vlan_info *vlan_info; + + ASSERT_RTNL(); + + vlan_info = rtnl_dereference(dev->vlan_info); + if (!vlan_info) + return false; + return vlan_info->grp.nr_vlan_devs ? true : false; } EXPORT_SYMBOL(vlan_uses_dev); -- cgit v0.10.2 From f6e80abeab928b7c47cc1fbf53df13b4398a2bec Mon Sep 17 00:00:00 2001 From: Zijie Pan Date: Mon, 15 Oct 2012 03:56:39 +0000 Subject: sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter() Bug introduced by commit edfee0339e681a784ebacec7e8c2dc97dc6d2839 (sctp: check src addr when processing SACK to update transport state) Signed-off-by: Zijie Pan Signed-off-by: Nicolas Dichtel Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 57f7de8..6773d78 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -1642,8 +1642,9 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, asoc->outqueue.outstanding_bytes; sackh.num_gap_ack_blocks = 0; sackh.num_dup_tsns = 0; + chunk->subh.sack_hdr = &sackh; sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_SACK, - SCTP_SACKH(&sackh)); + SCTP_CHUNK(chunk)); break; case SCTP_CMD_DISCARD_PACKET: -- cgit v0.10.2 From 1c8161a8249fa32408e3c073f992141c9d257332 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Mon, 15 Oct 2012 19:21:17 +0000 Subject: smsgiucv: reestablish IUCV path after resume smsg_pm_restore_thaw() uses wrong checking before reconnecting the IUCV path to *MSG. It is corrected with this patch. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c index 207b7d7..d8f990b 100644 --- a/drivers/s390/net/smsgiucv.c +++ b/drivers/s390/net/smsgiucv.c @@ -157,7 +157,7 @@ static int smsg_pm_restore_thaw(struct device *dev) #ifdef CONFIG_PM_DEBUG printk(KERN_WARNING "smsg_pm_restore_thaw\n"); #endif - if (smsg_path && iucv_path_connected) { + if (smsg_path && !iucv_path_connected) { memset(smsg_path, 0, sizeof(*smsg_path)); smsg_path->msglim = 255; smsg_path->flags = 0; -- cgit v0.10.2 From 2efaf5ff7fa2d45debc27cd9b3d235df61d641fb Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 15 Oct 2012 19:21:18 +0000 Subject: qeth: fix deadlock between recovery and bonding driver The recovery thread, when failing, tears down the respective interface. To do so, it needs to obtain the rtnl lock first, as the interface configuration is changed. If another process tries to modify an interface setting at the same time, that process can obtain the rtnl lock first, but the respective callback in the qeth driver will block until recovery has completed - which cannot happen since the calling process already obtained it. In one particular case, the bonding driver acquired the rtnl lock to modify the card's MAC address, while the recovery failed at the same time due to the card being removed. Hence qeth_l2_set_mac_address (implicitly holding the rtnl lock) was waiting on qeth_l2_recover, which deadlocked when waiting on the rtnl lock. This patch uses rtnl_trylock instead of rtnl_lock in the recovery thread. If the lock cannot be obtained, the interface will be left up, but the card state remains in CARD_STATE_RECOVER, which will prevent any further activities on the card. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Reviewed-by: Ursula Braun Signed-off-by: David S. Miller diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 2db4093..e67e025 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1141,11 +1141,12 @@ static int qeth_l2_recover(void *ptr) dev_info(&card->gdev->dev, "Device successfully recovered!\n"); else { - rtnl_lock(); - dev_close(card->dev); - rtnl_unlock(); - dev_warn(&card->gdev->dev, "The qeth device driver " - "failed to recover an error on the device\n"); + if (rtnl_trylock()) { + dev_close(card->dev); + rtnl_unlock(); + dev_warn(&card->gdev->dev, "The qeth device driver " + "failed to recover an error on the device\n"); + } } qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 4cd310c..5ba3906 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3510,11 +3510,12 @@ static int qeth_l3_recover(void *ptr) dev_info(&card->gdev->dev, "Device successfully recovered!\n"); else { - rtnl_lock(); - dev_close(card->dev); - rtnl_unlock(); - dev_warn(&card->gdev->dev, "The qeth device driver " - "failed to recover an error on the device\n"); + if (rtnl_trylock()) { + dev_close(card->dev); + rtnl_unlock(); + dev_warn(&card->gdev->dev, "The qeth device driver " + "failed to recover an error on the device\n"); + } } qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); -- cgit v0.10.2 From 2384d6aa079de7c16c7877220d3cd4c6f4f50767 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Tue, 16 Oct 2012 01:28:27 +0000 Subject: bnx2x: fix handling mf storage modes Since commit a3348722 AFEX FCoE function is continuously reset. The patch prevents the resetting and removes debug print to stop garbaging syslog. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 2422099..4833b6a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2957,9 +2957,13 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_shinfo(skb)->nr_frags + BDS_PER_TX_PKT + NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT))) { - bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++; - netif_tx_stop_queue(txq); - BNX2X_ERR("BUG! Tx ring full when queue awake!\n"); + /* Handle special storage cases separately */ + if (txdata->tx_ring_size != 0) { + BNX2X_ERR("BUG! Tx ring full when queue awake!\n"); + bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++; + netif_tx_stop_queue(txq); + } + return NETDEV_TX_BUSY; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 71971a1..614981c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -126,7 +126,7 @@ static inline int bnx2x_exe_queue_add(struct bnx2x *bp, /* Check if this request is ok */ rc = o->validate(bp, o->owner, elem); if (rc) { - BNX2X_ERR("Preamble failed: %d\n", rc); + DP(BNX2X_MSG_SP, "Preamble failed: %d\n", rc); goto free_and_exit; } } -- cgit v0.10.2 From 9f0d3c2781baa1102108e16efbe640dd74564a7c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 16 Oct 2012 07:37:27 +0000 Subject: ipv6: addrconf: fix /proc/net/if_inet6 Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch Tested-by: Jan Hinnerk Stosch Signed-off-by: Eric Dumazet Cc: Mihai Maruseac Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d7c56f8..0424e4e 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3064,14 +3064,15 @@ static struct inet6_ifaddr *if6_get_first(struct seq_file *seq, loff_t pos) struct hlist_node *n; hlist_for_each_entry_rcu_bh(ifa, n, &inet6_addr_lst[state->bucket], addr_lst) { + if (!net_eq(dev_net(ifa->idev->dev), net)) + continue; /* sync with offset */ if (p < state->offset) { p++; continue; } state->offset++; - if (net_eq(dev_net(ifa->idev->dev), net)) - return ifa; + return ifa; } /* prepare for next bucket */ @@ -3089,18 +3090,20 @@ static struct inet6_ifaddr *if6_get_next(struct seq_file *seq, struct hlist_node *n = &ifa->addr_lst; hlist_for_each_entry_continue_rcu_bh(ifa, n, addr_lst) { + if (!net_eq(dev_net(ifa->idev->dev), net)) + continue; state->offset++; - if (net_eq(dev_net(ifa->idev->dev), net)) - return ifa; + return ifa; } while (++state->bucket < IN6_ADDR_HSIZE) { state->offset = 0; hlist_for_each_entry_rcu_bh(ifa, n, &inet6_addr_lst[state->bucket], addr_lst) { + if (!net_eq(dev_net(ifa->idev->dev), net)) + continue; state->offset++; - if (net_eq(dev_net(ifa->idev->dev), net)) - return ifa; + return ifa; } } -- cgit v0.10.2 From e793d8c6740f8fe704fa216e95685f4d92c4c4b9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Oct 2012 13:05:25 -0700 Subject: sparc64: Fix bit twiddling in sparc_pmu_enable_event(). There was a serious disconnect in the logic happening in sparc_pmu_disable_event() vs. sparc_pmu_enable_event(). Event disable is implemented by programming a NOP event into the PCR. However, event enable was not reversing this operation. Instead, it was setting the User/Priv/Hypervisor trace enable bits. That's not sparc_pmu_enable_event()'s job, that's what sparc_pmu_enable() and sparc_pmu_disable() do . The intent of sparc_pmu_enable_event() is clear, since it first clear out the event type encoding field. So fix this by OR'ing in the event encoding rather than the trace enable bits. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 9e96f84..885a8af 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -817,15 +817,17 @@ static u64 nop_for_index(int idx) static inline void sparc_pmu_enable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx) { - u64 val, mask = mask_for_index(idx); + u64 enc, val, mask = mask_for_index(idx); int pcr_index = 0; if (sparc_pmu->num_pcrs > 1) pcr_index = idx; + enc = perf_event_get_enc(cpuc->events[idx]); + val = cpuc->pcr[pcr_index]; val &= ~mask; - val |= hwc->config; + val |= event_encoding(enc, idx); cpuc->pcr[pcr_index] = val; pcr_ops->write_pcr(pcr_index, cpuc->pcr[pcr_index]); -- cgit v0.10.2 From 5210edcd527773c227465ad18e416a894966324f Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 28 Sep 2012 11:34:10 -0700 Subject: MIPS: Make __{,n,u}delay declarations match definitions and generic delay.h At some recent point arch/mips/include/asm/delay.h has started being included into csrc-octeon.c where the __?delay() functions are defined. This causes a compile failure due to conflicting declarations and definitions of the functions. It turns out that the generic definitions in arch/mips/lib/delay.c also conflict. Proposed fix: Declare the functions to take unsigned long parameters just like asm-generic (and x86) does. Update __delay to agree (__ndelay and __udelay need no change). Bonus: Get rid of 'inline' from __delay() definition, as it is globally visible, and the compiler should be making this decision itself (it does in fact inline the function without being told to). Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4354/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h index e7cd782..dc0a5f7 100644 --- a/arch/mips/include/asm/delay.h +++ b/arch/mips/include/asm/delay.h @@ -13,9 +13,9 @@ #include -extern void __delay(unsigned int loops); -extern void __ndelay(unsigned int ns); -extern void __udelay(unsigned int us); +extern void __delay(unsigned long loops); +extern void __ndelay(unsigned long ns); +extern void __udelay(unsigned long us); #define ndelay(ns) __ndelay(ns) #define udelay(us) __udelay(us) diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c index 5995969..dc81ca8 100644 --- a/arch/mips/lib/delay.c +++ b/arch/mips/lib/delay.c @@ -15,13 +15,17 @@ #include #include -inline void __delay(unsigned int loops) +void __delay(unsigned long loops) { __asm__ __volatile__ ( " .set noreorder \n" " .align 3 \n" "1: bnez %0, 1b \n" +#if __SIZEOF_LONG__ == 4 " subu %0, 1 \n" +#else + " dsubu %0, 1 \n" +#endif " .set reorder \n" : "=r" (loops) : "0" (loops)); -- cgit v0.10.2 From 02a5417751c31cd64197652c000a5ab0d3261465 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 13 Oct 2012 22:46:26 +0200 Subject: MIPS: tlbex: Deal with re-definition of label The microassembler used in tlbex.c does not notice if a label is redefined resulting in relocations against such labels silently missrelocated. The issues exists since commit add6eb04776db4189ea89f596cbcde31b899be9d [Synthesize TLB exception handlers at runtime.] in 2.6.10 and went unnoticed for so long because the relocations for the affected branches got computed to do something *almost* sensible. The issue affects R4000, R4400, QED/IDT RM5230, RM5231, RM5260, RM5261, RM5270 and RM5271 processors. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 658a520..6ea1525 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -148,8 +148,8 @@ enum label_id { label_leave, label_vmalloc, label_vmalloc_done, - label_tlbw_hazard, - label_split, + label_tlbw_hazard_0, + label_split = label_tlbw_hazard_0 + 8, label_tlbl_goaround1, label_tlbl_goaround2, label_nopage_tlbl, @@ -167,7 +167,7 @@ UASM_L_LA(_second_part) UASM_L_LA(_leave) UASM_L_LA(_vmalloc) UASM_L_LA(_vmalloc_done) -UASM_L_LA(_tlbw_hazard) +/* _tlbw_hazard_x is handled differently. */ UASM_L_LA(_split) UASM_L_LA(_tlbl_goaround1) UASM_L_LA(_tlbl_goaround2) @@ -181,6 +181,30 @@ UASM_L_LA(_large_segbits_fault) UASM_L_LA(_tlb_huge_update) #endif +static int __cpuinitdata hazard_instance; + +static void uasm_bgezl_hazard(u32 **p, struct uasm_reloc **r, int instance) +{ + switch (instance) { + case 0 ... 7: + uasm_il_bgezl(p, r, 0, label_tlbw_hazard_0 + instance); + return; + default: + BUG(); + } +} + +static void uasm_bgezl_label(struct uasm_label **l, u32 **p, int instance) +{ + switch (instance) { + case 0 ... 7: + uasm_build_label(l, *p, label_tlbw_hazard_0 + instance); + break; + default: + BUG(); + } +} + /* * For debug purposes. */ @@ -478,9 +502,10 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, * This branch uses up a mtc0 hazard nop slot and saves * two nops after the tlbw instruction. */ - uasm_il_bgezl(p, r, 0, label_tlbw_hazard); + uasm_bgezl_hazard(p, r, hazard_instance); tlbw(p); - uasm_l_tlbw_hazard(l, *p); + uasm_bgezl_label(l, p, hazard_instance); + hazard_instance++; uasm_i_nop(p); break; @@ -528,13 +553,15 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_NEVADA: uasm_i_nop(p); /* QED specifies 2 nops hazard */ + uasm_i_nop(p); /* QED specifies 2 nops hazard */ /* * This branch uses up a mtc0 hazard nop slot and saves * a nop after the tlbw instruction. */ - uasm_il_bgezl(p, r, 0, label_tlbw_hazard); + uasm_bgezl_hazard(p, r, hazard_instance); tlbw(p); - uasm_l_tlbw_hazard(l, *p); + uasm_bgezl_label(l, p, hazard_instance); + hazard_instance++; break; case CPU_RM7000: -- cgit v0.10.2 From 359187d647a7a7813444ff5932d0b862f970bb0f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 16 Oct 2012 22:13:06 +0200 Subject: MIPS: R5000: Fix TLB hazard handling. R5000 and the Nevada CPUs (RM5230, RM5231, RM5260, RM5261, RM5270 and RM5271) are basically the same CPU core and all are documented to require two instructions separating a write to c0_pagemask, c0_entryhi, c0_entrylo0, c0_entrylo1 or c0_index. So far we were only providing on cycle before / after a TLBR/TLBWI for R5000 but 3 cycles before and 1 cycles after for the Nevadas. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 6ea1525..2833dcb 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -511,13 +511,19 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_R4600: case CPU_R4700: - case CPU_R5000: - case CPU_R5000A: uasm_i_nop(p); tlbw(p); uasm_i_nop(p); break; + case CPU_R5000: + case CPU_R5000A: + case CPU_NEVADA: + uasm_i_nop(p); /* QED specifies 2 nops hazard */ + uasm_i_nop(p); /* QED specifies 2 nops hazard */ + tlbw(p); + break; + case CPU_R4300: case CPU_5KC: case CPU_TX49XX: @@ -551,19 +557,6 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, tlbw(p); break; - case CPU_NEVADA: - uasm_i_nop(p); /* QED specifies 2 nops hazard */ - uasm_i_nop(p); /* QED specifies 2 nops hazard */ - /* - * This branch uses up a mtc0 hazard nop slot and saves - * a nop after the tlbw instruction. - */ - uasm_bgezl_hazard(p, r, hazard_instance); - tlbw(p); - uasm_bgezl_label(l, p, hazard_instance); - hazard_instance++; - break; - case CPU_RM7000: uasm_i_nop(p); uasm_i_nop(p); -- cgit v0.10.2 From 70c1674f62026e455c0c821fb7f4baf24d2d1139 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Oct 2012 21:28:05 +0100 Subject: UAPI: (Scripted) Disintegrate arch/parisc/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild index 77281064..bac8deb 100644 --- a/arch/parisc/include/asm/Kbuild +++ b/arch/parisc/include/asm/Kbuild @@ -1,6 +1,4 @@ -include include/asm-generic/Kbuild.asm -header-y += pdc.h generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \ segment.h topology.h vga.h device.h percpu.h hw_irq.h mutex.h \ div64.h irq_regs.h kdebug.h kvm_para.h local64.h local.h param.h \ diff --git a/arch/parisc/include/asm/bitsperlong.h b/arch/parisc/include/asm/bitsperlong.h deleted file mode 100644 index 75196b4..0000000 --- a/arch/parisc/include/asm/bitsperlong.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_PARISC_BITSPERLONG_H -#define __ASM_PARISC_BITSPERLONG_H - -/* - * using CONFIG_* outside of __KERNEL__ is wrong, - * __LP64__ was also removed from headers, so what - * is the right approach on parisc? - * -arnd - */ -#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__) -#define __BITS_PER_LONG 64 -#define SHIFT_PER_LONG 6 -#else -#define __BITS_PER_LONG 32 -#define SHIFT_PER_LONG 5 -#endif - -#include - -#endif /* __ASM_PARISC_BITSPERLONG_H */ diff --git a/arch/parisc/include/asm/byteorder.h b/arch/parisc/include/asm/byteorder.h deleted file mode 100644 index 58af2c5..0000000 --- a/arch/parisc/include/asm/byteorder.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PARISC_BYTEORDER_H -#define _PARISC_BYTEORDER_H - -#include - -#endif /* _PARISC_BYTEORDER_H */ diff --git a/arch/parisc/include/asm/errno.h b/arch/parisc/include/asm/errno.h deleted file mode 100644 index 135ad60..0000000 --- a/arch/parisc/include/asm/errno.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef _PARISC_ERRNO_H -#define _PARISC_ERRNO_H - -#include - -#define ENOMSG 35 /* No message of desired type */ -#define EIDRM 36 /* Identifier removed */ -#define ECHRNG 37 /* Channel number out of range */ -#define EL2NSYNC 38 /* Level 2 not synchronized */ -#define EL3HLT 39 /* Level 3 halted */ -#define EL3RST 40 /* Level 3 reset */ -#define ELNRNG 41 /* Link number out of range */ -#define EUNATCH 42 /* Protocol driver not attached */ -#define ENOCSI 43 /* No CSI structure available */ -#define EL2HLT 44 /* Level 2 halted */ -#define EDEADLK 45 /* Resource deadlock would occur */ -#define EDEADLOCK EDEADLK -#define ENOLCK 46 /* No record locks available */ -#define EILSEQ 47 /* Illegal byte sequence */ - -#define ENONET 50 /* Machine is not on the network */ -#define ENODATA 51 /* No data available */ -#define ETIME 52 /* Timer expired */ -#define ENOSR 53 /* Out of streams resources */ -#define ENOSTR 54 /* Device not a stream */ -#define ENOPKG 55 /* Package not installed */ - -#define ENOLINK 57 /* Link has been severed */ -#define EADV 58 /* Advertise error */ -#define ESRMNT 59 /* Srmount error */ -#define ECOMM 60 /* Communication error on send */ -#define EPROTO 61 /* Protocol error */ - -#define EMULTIHOP 64 /* Multihop attempted */ - -#define EDOTDOT 66 /* RFS specific error */ -#define EBADMSG 67 /* Not a data message */ -#define EUSERS 68 /* Too many users */ -#define EDQUOT 69 /* Quota exceeded */ -#define ESTALE 70 /* Stale NFS file handle */ -#define EREMOTE 71 /* Object is remote */ -#define EOVERFLOW 72 /* Value too large for defined data type */ - -/* these errnos are defined by Linux but not HPUX. */ - -#define EBADE 160 /* Invalid exchange */ -#define EBADR 161 /* Invalid request descriptor */ -#define EXFULL 162 /* Exchange full */ -#define ENOANO 163 /* No anode */ -#define EBADRQC 164 /* Invalid request code */ -#define EBADSLT 165 /* Invalid slot */ -#define EBFONT 166 /* Bad font file format */ -#define ENOTUNIQ 167 /* Name not unique on network */ -#define EBADFD 168 /* File descriptor in bad state */ -#define EREMCHG 169 /* Remote address changed */ -#define ELIBACC 170 /* Can not access a needed shared library */ -#define ELIBBAD 171 /* Accessing a corrupted shared library */ -#define ELIBSCN 172 /* .lib section in a.out corrupted */ -#define ELIBMAX 173 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 174 /* Cannot exec a shared library directly */ -#define ERESTART 175 /* Interrupted system call should be restarted */ -#define ESTRPIPE 176 /* Streams pipe error */ -#define EUCLEAN 177 /* Structure needs cleaning */ -#define ENOTNAM 178 /* Not a XENIX named type file */ -#define ENAVAIL 179 /* No XENIX semaphores available */ -#define EISNAM 180 /* Is a named type file */ -#define EREMOTEIO 181 /* Remote I/O error */ -#define ENOMEDIUM 182 /* No medium found */ -#define EMEDIUMTYPE 183 /* Wrong medium type */ -#define ENOKEY 184 /* Required key not available */ -#define EKEYEXPIRED 185 /* Key has expired */ -#define EKEYREVOKED 186 /* Key has been revoked */ -#define EKEYREJECTED 187 /* Key was rejected by service */ - -/* We now return you to your regularly scheduled HPUX. */ - -#define ENOSYM 215 /* symbol does not exist in executable */ -#define ENOTSOCK 216 /* Socket operation on non-socket */ -#define EDESTADDRREQ 217 /* Destination address required */ -#define EMSGSIZE 218 /* Message too long */ -#define EPROTOTYPE 219 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 220 /* Protocol not available */ -#define EPROTONOSUPPORT 221 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 222 /* Socket type not supported */ -#define EOPNOTSUPP 223 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 224 /* Protocol family not supported */ -#define EAFNOSUPPORT 225 /* Address family not supported by protocol */ -#define EADDRINUSE 226 /* Address already in use */ -#define EADDRNOTAVAIL 227 /* Cannot assign requested address */ -#define ENETDOWN 228 /* Network is down */ -#define ENETUNREACH 229 /* Network is unreachable */ -#define ENETRESET 230 /* Network dropped connection because of reset */ -#define ECONNABORTED 231 /* Software caused connection abort */ -#define ECONNRESET 232 /* Connection reset by peer */ -#define ENOBUFS 233 /* No buffer space available */ -#define EISCONN 234 /* Transport endpoint is already connected */ -#define ENOTCONN 235 /* Transport endpoint is not connected */ -#define ESHUTDOWN 236 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 237 /* Too many references: cannot splice */ -#define EREFUSED ECONNREFUSED /* for HP's NFS apparently */ -#define ETIMEDOUT 238 /* Connection timed out */ -#define ECONNREFUSED 239 /* Connection refused */ -#define EREMOTERELEASE 240 /* Remote peer released connection */ -#define EHOSTDOWN 241 /* Host is down */ -#define EHOSTUNREACH 242 /* No route to host */ - -#define EALREADY 244 /* Operation already in progress */ -#define EINPROGRESS 245 /* Operation now in progress */ -#define EWOULDBLOCK 246 /* Operation would block (Linux returns EAGAIN) */ -#define ENOTEMPTY 247 /* Directory not empty */ -#define ENAMETOOLONG 248 /* File name too long */ -#define ELOOP 249 /* Too many symbolic links encountered */ -#define ENOSYS 251 /* Function not implemented */ - -#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */ -#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */ -#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */ - -/* for robust mutexes */ -#define EOWNERDEAD 254 /* Owner died */ -#define ENOTRECOVERABLE 255 /* State not recoverable */ - -#define ERFKILL 256 /* Operation not possible due to RF-kill */ - -#define EHWPOISON 257 /* Memory page has hardware error */ - -#endif diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h deleted file mode 100644 index 0304b92..0000000 --- a/arch/parisc/include/asm/fcntl.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _PARISC_FCNTL_H -#define _PARISC_FCNTL_H - -#define O_APPEND 000000010 -#define O_BLKSEEK 000000100 /* HPUX only */ -#define O_CREAT 000000400 /* not fcntl */ -#define O_EXCL 000002000 /* not fcntl */ -#define O_LARGEFILE 000004000 -#define __O_SYNC 000100000 -#define O_SYNC (__O_SYNC|O_DSYNC) -#define O_NONBLOCK 000200004 /* HPUX has separate NDELAY & NONBLOCK */ -#define O_NOCTTY 000400000 /* not fcntl */ -#define O_DSYNC 001000000 /* HPUX only */ -#define O_RSYNC 002000000 /* HPUX only */ -#define O_NOATIME 004000000 -#define O_CLOEXEC 010000000 /* set close_on_exec */ - -#define O_DIRECTORY 000010000 /* must be a directory */ -#define O_NOFOLLOW 000000200 /* don't follow links */ -#define O_INVISIBLE 004000000 /* invisible I/O, for DMAPI/XDSM */ - -#define O_PATH 020000000 - -#define F_GETLK64 8 -#define F_SETLK64 9 -#define F_SETLKW64 10 - -#define F_GETOWN 11 /* for sockets. */ -#define F_SETOWN 12 /* for sockets. */ -#define F_SETSIG 13 /* for sockets. */ -#define F_GETSIG 14 /* for sockets. */ - -/* for posix fcntl() and lockf() */ -#define F_RDLCK 01 -#define F_WRLCK 02 -#define F_UNLCK 03 - -#include - -#endif diff --git a/arch/parisc/include/asm/ioctl.h b/arch/parisc/include/asm/ioctl.h deleted file mode 100644 index ec8efa0..0000000 --- a/arch/parisc/include/asm/ioctl.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Linux/PA-RISC Project (http://www.parisc-linux.org/) - * Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org > - * portions from "linux/ioctl.h for Linux" by H.H. Bergman. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#ifndef _ASM_PARISC_IOCTL_H -#define _ASM_PARISC_IOCTL_H - -/* ioctl command encoding: 32 bits total, command in lower 16 bits, - * size of the parameter structure in the lower 14 bits of the - * upper 16 bits. - * Encoding the size of the parameter structure in the ioctl request - * is useful for catching programs compiled with old versions - * and to avoid overwriting user space outside the user buffer area. - * The highest 2 bits are reserved for indicating the ``access mode''. - * NOTE: This limits the max parameter size to 16kB -1 ! - */ - -/* - * Direction bits. - */ -#define _IOC_NONE 0U -#define _IOC_WRITE 2U -#define _IOC_READ 1U - -#include - -#endif /* _ASM_PARISC_IOCTL_H */ diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h deleted file mode 100644 index 054ec06..0000000 --- a/arch/parisc/include/asm/ioctls.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ARCH_PARISC_IOCTLS_H__ -#define __ARCH_PARISC_IOCTLS_H__ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS _IOR('T', 16, struct termios) /* TCGETATTR */ -#define TCSETS _IOW('T', 17, struct termios) /* TCSETATTR */ -#define TCSETSW _IOW('T', 18, struct termios) /* TCSETATTRD */ -#define TCSETSF _IOW('T', 19, struct termios) /* TCSETATTRF */ -#define TCGETA _IOR('T', 1, struct termio) -#define TCSETA _IOW('T', 2, struct termio) -#define TCSETAW _IOW('T', 3, struct termio) -#define TCSETAF _IOW('T', 4, struct termio) -#define TCSBRK _IO('T', 5) -#define TCXONC _IO('T', 6) -#define TCFLSH _IO('T', 7) -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP _IOR('T', 30, int) -#define TIOCSPGRP _IOW('T', 29, int) -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID _IOR('T', 20, int) /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ -#define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */ -#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ -#define TIOCVHANGUP 0x5437 - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x5460 /* Get exact space used by quota */ - -#define TIOCSTART 0x5461 -#define TIOCSTOP 0x5462 -#define TIOCSLTC 0x5462 - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 -#define TIOCPKT_IOCTL 64 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* _ASM_PARISC_IOCTLS_H */ diff --git a/arch/parisc/include/asm/ipcbuf.h b/arch/parisc/include/asm/ipcbuf.h deleted file mode 100644 index bd956c4..0000000 --- a/arch/parisc/include/asm/ipcbuf.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __PARISC_IPCBUF_H__ -#define __PARISC_IPCBUF_H__ - -/* - * The ipc64_perm structure for PA-RISC is almost identical to - * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel. - * 'seq' has been changed from long to int so that it's the same size - * on 64-bit kernels as on 32-bit ones. - */ - -struct ipc64_perm -{ - key_t key; - uid_t uid; - gid_t gid; - uid_t cuid; - gid_t cgid; - unsigned short int __pad1; - mode_t mode; - unsigned short int __pad2; - unsigned short int seq; - unsigned int __pad3; - unsigned long long int __unused1; - unsigned long long int __unused2; -}; - -#endif /* __PARISC_IPCBUF_H__ */ diff --git a/arch/parisc/include/asm/mman.h b/arch/parisc/include/asm/mman.h deleted file mode 100644 index 12219eb..0000000 --- a/arch/parisc/include/asm/mman.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __PARISC_MMAN_H__ -#define __PARISC_MMAN_H__ - -#define PROT_READ 0x1 /* page can be read */ -#define PROT_WRITE 0x2 /* page can be written */ -#define PROT_EXEC 0x4 /* page can be executed */ -#define PROT_SEM 0x8 /* page may be used for atomic ops */ -#define PROT_NONE 0x0 /* page can not be accessed */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ - -#define MAP_SHARED 0x01 /* Share changes */ -#define MAP_PRIVATE 0x02 /* Changes are private */ -#define MAP_TYPE 0x03 /* Mask for type of mapping */ -#define MAP_FIXED 0x04 /* Interpret addr exactly */ -#define MAP_ANONYMOUS 0x10 /* don't use a file */ - -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_GROWSDOWN 0x8000 /* stack-like segment */ -#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x20000 /* do not block on IO */ -#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ -#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ - -#define MS_SYNC 1 /* synchronous memory sync */ -#define MS_ASYNC 2 /* sync memory asynchronously */ -#define MS_INVALIDATE 4 /* invalidate the caches */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#define MADV_NORMAL 0 /* no further special treatment */ -#define MADV_RANDOM 1 /* expect random page references */ -#define MADV_SEQUENTIAL 2 /* expect sequential page references */ -#define MADV_WILLNEED 3 /* will need these pages */ -#define MADV_DONTNEED 4 /* don't need these pages */ -#define MADV_SPACEAVAIL 5 /* insure that resources are reserved */ -#define MADV_VPS_PURGE 6 /* Purge pages from VM page cache */ -#define MADV_VPS_INHERIT 7 /* Inherit parents page size */ - -/* common/generic parameters */ -#define MADV_REMOVE 9 /* remove these pages & resources */ -#define MADV_DONTFORK 10 /* don't inherit across fork */ -#define MADV_DOFORK 11 /* do inherit across fork */ - -/* The range 12-64 is reserved for page size specification. */ -#define MADV_4K_PAGES 12 /* Use 4K pages */ -#define MADV_16K_PAGES 14 /* Use 16K pages */ -#define MADV_64K_PAGES 16 /* Use 64K pages */ -#define MADV_256K_PAGES 18 /* Use 256K pages */ -#define MADV_1M_PAGES 20 /* Use 1 Megabyte pages */ -#define MADV_4M_PAGES 22 /* Use 4 Megabyte pages */ -#define MADV_16M_PAGES 24 /* Use 16 Megabyte pages */ -#define MADV_64M_PAGES 26 /* Use 64 Megabyte pages */ - -#define MADV_MERGEABLE 65 /* KSM may merge identical pages */ -#define MADV_UNMERGEABLE 66 /* KSM may not merge identical pages */ - -#define MADV_HUGEPAGE 67 /* Worth backing with hugepages */ -#define MADV_NOHUGEPAGE 68 /* Not worth backing with hugepages */ - -#define MADV_DONTDUMP 69 /* Explicity exclude from the core dump, - overrides the coredump filter bits */ -#define MADV_DODUMP 70 /* Clear the MADV_NODUMP flag */ - -/* compatibility flags */ -#define MAP_FILE 0 -#define MAP_VARIABLE 0 - -#endif /* __PARISC_MMAN_H__ */ diff --git a/arch/parisc/include/asm/msgbuf.h b/arch/parisc/include/asm/msgbuf.h deleted file mode 100644 index fe88f26..0000000 --- a/arch/parisc/include/asm/msgbuf.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _PARISC_MSGBUF_H -#define _PARISC_MSGBUF_H - -/* - * The msqid64_ds structure for parisc architecture, copied from sparc. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; -#ifndef CONFIG_64BIT - unsigned int __pad1; -#endif - __kernel_time_t msg_stime; /* last msgsnd time */ -#ifndef CONFIG_64BIT - unsigned int __pad2; -#endif - __kernel_time_t msg_rtime; /* last msgrcv time */ -#ifndef CONFIG_64BIT - unsigned int __pad3; -#endif - __kernel_time_t msg_ctime; /* last change time */ - unsigned int msg_cbytes; /* current number of bytes on queue */ - unsigned int msg_qnum; /* number of messages in queue */ - unsigned int msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned int __unused1; - unsigned int __unused2; -}; - -#endif /* _PARISC_MSGBUF_H */ diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h index 7f0f2d2..7eb616e 100644 --- a/arch/parisc/include/asm/pdc.h +++ b/arch/parisc/include/asm/pdc.h @@ -1,348 +1,10 @@ #ifndef _PARISC_PDC_H #define _PARISC_PDC_H -/* - * PDC return values ... - * All PDC calls return a subset of these errors. - */ - -#define PDC_WARN 3 /* Call completed with a warning */ -#define PDC_REQ_ERR_1 2 /* See above */ -#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */ -#define PDC_OK 0 /* Call completed successfully */ -#define PDC_BAD_PROC -1 /* Called non-existent procedure*/ -#define PDC_BAD_OPTION -2 /* Called with non-existent option */ -#define PDC_ERROR -3 /* Call could not complete without an error */ -#define PDC_NE_MOD -5 /* Module not found */ -#define PDC_NE_CELL_MOD -7 /* Cell module not found */ -#define PDC_INVALID_ARG -10 /* Called with an invalid argument */ -#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */ -#define PDC_NOT_NARROW -17 /* Narrow mode not supported */ - -/* - * PDC entry points... - */ - -#define PDC_POW_FAIL 1 /* perform a power-fail */ -#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */ - -#define PDC_CHASSIS 2 /* PDC-chassis functions */ -#define PDC_CHASSIS_DISP 0 /* update chassis display */ -#define PDC_CHASSIS_WARN 1 /* return chassis warnings */ -#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */ -#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */ - -#define PDC_PIM 3 /* Get PIM data */ -#define PDC_PIM_HPMC 0 /* Transfer HPMC data */ -#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/ -#define PDC_PIM_LPMC 2 /* Transfer HPMC data */ -#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */ -#define PDC_PIM_TOC 4 /* Transfer TOC data */ - -#define PDC_MODEL 4 /* PDC model information call */ -#define PDC_MODEL_INFO 0 /* returns information */ -#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */ -#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/ -#define PDC_MODEL_SYSMODEL 3 /* return system model info */ -#define PDC_MODEL_ENSPEC 4 /* enable specific option */ -#define PDC_MODEL_DISPEC 5 /* disable specific option */ -#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */ -#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */ -/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */ -#define PDC_MODEL_OS64 (1 << 0) -#define PDC_MODEL_OS32 (1 << 1) -#define PDC_MODEL_IOPDIR_FDC (1 << 2) -#define PDC_MODEL_NVA_MASK (3 << 4) -#define PDC_MODEL_NVA_SUPPORTED (0 << 4) -#define PDC_MODEL_NVA_SLOW (1 << 4) -#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4) -#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */ -#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */ - -#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */ -#define PA90_INSTRUCTION_SET 0x8 - -#define PDC_CACHE 5 /* return/set cache (& TLB) info*/ -#define PDC_CACHE_INFO 0 /* returns information */ -#define PDC_CACHE_SET_COH 1 /* set coherence state */ -#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */ - -#define PDC_HPA 6 /* return HPA of processor */ -#define PDC_HPA_PROCESSOR 0 -#define PDC_HPA_MODULES 1 - -#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */ -#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */ - -#define PDC_IODC 8 /* talk to IODC */ -#define PDC_IODC_READ 0 /* read IODC entry point */ -/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */ -#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */ -/* 1, 2 obsolete - HVERSION dependent*/ -#define PDC_IODC_RI_INIT 3 /* Initialize module */ -#define PDC_IODC_RI_IO 4 /* Module input/output */ -#define PDC_IODC_RI_SPA 5 /* Module input/output */ -#define PDC_IODC_RI_CONFIG 6 /* Module input/output */ -/* 7 obsolete - HVERSION dependent */ -#define PDC_IODC_RI_TEST 8 /* Module input/output */ -#define PDC_IODC_RI_TLB 9 /* Module input/output */ -#define PDC_IODC_NINIT 2 /* non-destructive init */ -#define PDC_IODC_DINIT 3 /* destructive init */ -#define PDC_IODC_MEMERR 4 /* check for memory errors */ -#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */ -#define PDC_IODC_BUS_ERROR -4 /* bus error return value */ -#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */ -#define PDC_IODC_COUNT -6 /* count is too small */ - -#define PDC_TOD 9 /* time-of-day clock (TOD) */ -#define PDC_TOD_READ 0 /* read TOD */ -#define PDC_TOD_WRITE 1 /* write TOD */ - - -#define PDC_STABLE 10 /* stable storage (sprockets) */ -#define PDC_STABLE_READ 0 -#define PDC_STABLE_WRITE 1 -#define PDC_STABLE_RETURN_SIZE 2 -#define PDC_STABLE_VERIFY_CONTENTS 3 -#define PDC_STABLE_INITIALIZE 4 - -#define PDC_NVOLATILE 11 /* often not implemented */ - -#define PDC_ADD_VALID 12 /* Memory validation PDC call */ -#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */ - -#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */ - -#define PDC_PROC 16 /* (sprockets) */ - -#define PDC_CONFIG 16 /* (sprockets) */ -#define PDC_CONFIG_DECONFIG 0 -#define PDC_CONFIG_DRECONFIG 1 -#define PDC_CONFIG_DRETURN_CONFIG 2 - -#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */ -#define PDC_BTLB_INFO 0 /* returns parameter */ -#define PDC_BTLB_INSERT 1 /* insert BTLB entry */ -#define PDC_BTLB_PURGE 2 /* purge BTLB entries */ -#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */ - -#define PDC_TLB 19 /* manage hardware TLB miss handling */ -#define PDC_TLB_INFO 0 /* returns parameter */ -#define PDC_TLB_SETUP 1 /* set up miss handling */ - -#define PDC_MEM 20 /* Manage memory */ -#define PDC_MEM_MEMINFO 0 -#define PDC_MEM_ADD_PAGE 1 -#define PDC_MEM_CLEAR_PDT 2 -#define PDC_MEM_READ_PDT 3 -#define PDC_MEM_RESET_CLEAR 4 -#define PDC_MEM_GOODMEM 5 -#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */ -#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE -#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131 -#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132 -#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133 - -#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */ -#define PDC_MEM_RET_DUPLICATE_ENTRY 4 -#define PDC_MEM_RET_BUF_SIZE_SMALL 1 -#define PDC_MEM_RET_PDT_FULL -11 -#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL - -#define PDC_PSW 21 /* Get/Set default System Mask */ -#define PDC_PSW_MASK 0 /* Return mask */ -#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */ -#define PDC_PSW_SET_DEFAULTS 2 /* Set default */ -#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */ -#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */ - -#define PDC_SYSTEM_MAP 22 /* find system modules */ -#define PDC_FIND_MODULE 0 -#define PDC_FIND_ADDRESS 1 -#define PDC_TRANSLATE_PATH 2 - -#define PDC_SOFT_POWER 23 /* soft power switch */ -#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */ -#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */ - - -/* HVERSION dependent */ - -/* The PDC_MEM_MAP calls */ -#define PDC_MEM_MAP 128 /* on s700: return page info */ -#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */ - -#define PDC_EEPROM 129 /* EEPROM access */ -#define PDC_EEPROM_READ_WORD 0 -#define PDC_EEPROM_WRITE_WORD 1 -#define PDC_EEPROM_READ_BYTE 2 -#define PDC_EEPROM_WRITE_BYTE 3 -#define PDC_EEPROM_EEPROM_PASSWORD -1000 - -#define PDC_NVM 130 /* NVM (non-volatile memory) access */ -#define PDC_NVM_READ_WORD 0 -#define PDC_NVM_WRITE_WORD 1 -#define PDC_NVM_READ_BYTE 2 -#define PDC_NVM_WRITE_BYTE 3 - -#define PDC_SEED_ERROR 132 /* (sprockets) */ - -#define PDC_IO 135 /* log error info, reset IO system */ -#define PDC_IO_READ_AND_CLEAR_ERRORS 0 -#define PDC_IO_RESET 1 -#define PDC_IO_RESET_DEVICES 2 -/* sets bits 6&7 (little endian) of the HcControl Register */ -#define PDC_IO_USB_SUSPEND 0xC000000000000000 -#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */ -#define PDC_IO_NO_SUSPEND -6 /* return value */ - -#define PDC_BROADCAST_RESET 136 /* reset all processors */ -#define PDC_DO_RESET 0 /* option: perform a broadcast reset */ -#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */ -#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */ -#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */ - -#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */ -#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */ - -#define PDC_LAN_STATION_ID_SIZE 6 - -#define PDC_CHECK_RANGES 139 /* (sprockets) */ - -#define PDC_NV_SECTIONS 141 /* (sprockets) */ - -#define PDC_PERFORMANCE 142 /* performance monitoring */ - -#define PDC_SYSTEM_INFO 143 /* system information */ -#define PDC_SYSINFO_RETURN_INFO_SIZE 0 -#define PDC_SYSINFO_RRETURN_SYS_INFO 1 -#define PDC_SYSINFO_RRETURN_ERRORS 2 -#define PDC_SYSINFO_RRETURN_WARNINGS 3 -#define PDC_SYSINFO_RETURN_REVISIONS 4 -#define PDC_SYSINFO_RRETURN_DIAGNOSE 5 -#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005 - -#define PDC_RDR 144 /* (sprockets) */ -#define PDC_RDR_READ_BUFFER 0 -#define PDC_RDR_READ_SINGLE 1 -#define PDC_RDR_WRITE_SINGLE 2 - -#define PDC_INTRIGUE 145 /* (sprockets) */ -#define PDC_INTRIGUE_WRITE_BUFFER 0 -#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1 -#define PDC_INTRIGUE_START_CPU_COUNTERS 2 -#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3 - -#define PDC_STI 146 /* STI access */ -/* same as PDC_PCI_XXX values (see below) */ - -/* Legacy PDC definitions for same stuff */ -#define PDC_PCI_INDEX 147 -#define PDC_PCI_INTERFACE_INFO 0 -#define PDC_PCI_SLOT_INFO 1 -#define PDC_PCI_INFLIGHT_BYTES 2 -#define PDC_PCI_READ_CONFIG 3 -#define PDC_PCI_WRITE_CONFIG 4 -#define PDC_PCI_READ_PCI_IO 5 -#define PDC_PCI_WRITE_PCI_IO 6 -#define PDC_PCI_READ_CONFIG_DELAY 7 -#define PDC_PCI_UPDATE_CONFIG_DELAY 8 -#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9 -#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10 -#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11 -#define PDC_PCI_PCI_RESERVED 12 -#define PDC_PCI_PCI_INT_ROUTE_SIZE 13 -#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE -#define PDC_PCI_PCI_INT_ROUTE 14 -#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE -#define PDC_PCI_READ_MON_TYPE 15 -#define PDC_PCI_WRITE_MON_TYPE 16 - - -/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */ -#define PDC_INITIATOR 163 -#define PDC_GET_INITIATOR 0 -#define PDC_SET_INITIATOR 1 -#define PDC_DELETE_INITIATOR 2 -#define PDC_RETURN_TABLE_SIZE 3 -#define PDC_RETURN_TABLE 4 - -#define PDC_LINK 165 /* (sprockets) */ -#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */ -#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */ - -/* cl_class - * page 3-33 of IO-Firmware ARS - * IODC ENTRY_INIT(Search first) RET[1] - */ -#define CL_NULL 0 /* invalid */ -#define CL_RANDOM 1 /* random access (as disk) */ -#define CL_SEQU 2 /* sequential access (as tape) */ -#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */ -#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */ -#define CL_DISPL 9 /* half-duplex console (display) */ -#define CL_FC 10 /* FiberChannel access media */ - -/* IODC ENTRY_INIT() */ -#define ENTRY_INIT_SRCH_FRST 2 -#define ENTRY_INIT_SRCH_NEXT 3 -#define ENTRY_INIT_MOD_DEV 4 -#define ENTRY_INIT_DEV 5 -#define ENTRY_INIT_MOD 6 -#define ENTRY_INIT_MSG 9 - -/* IODC ENTRY_IO() */ -#define ENTRY_IO_BOOTIN 0 -#define ENTRY_IO_BOOTOUT 1 -#define ENTRY_IO_CIN 2 -#define ENTRY_IO_COUT 3 -#define ENTRY_IO_CLOSE 4 -#define ENTRY_IO_GETMSG 9 -#define ENTRY_IO_BBLOCK_IN 16 -#define ENTRY_IO_BBLOCK_OUT 17 - -/* IODC ENTRY_SPA() */ - -/* IODC ENTRY_CONFIG() */ - -/* IODC ENTRY_TEST() */ - -/* IODC ENTRY_TLB() */ - -/* constants for OS (NVM...) */ -#define OS_ID_NONE 0 /* Undefined OS ID */ -#define OS_ID_HPUX 1 /* HP-UX OS */ -#define OS_ID_MPEXL 2 /* MPE XL OS */ -#define OS_ID_OSF 3 /* OSF OS */ -#define OS_ID_HPRT 4 /* HP-RT OS */ -#define OS_ID_NOVEL 5 /* NOVELL OS */ -#define OS_ID_LINUX 6 /* Linux */ - - -/* constants for PDC_CHASSIS */ -#define OSTAT_OFF 0 -#define OSTAT_FLT 1 -#define OSTAT_TEST 2 -#define OSTAT_INIT 3 -#define OSTAT_SHUT 4 -#define OSTAT_WARN 5 -#define OSTAT_RUN 6 -#define OSTAT_ON 7 - -/* Page Zero constant offsets used by the HPMC handler */ -#define BOOT_CONSOLE_HPA_OFFSET 0x3c0 -#define BOOT_CONSOLE_SPA_OFFSET 0x3c4 -#define BOOT_CONSOLE_PATH_OFFSET 0x3a8 - -/* size of the pdc_result buffer for firmware.c */ -#define NUM_PDC_RESULT 32 +#include #if !defined(__ASSEMBLY__) -#include - -#ifdef __KERNEL__ - extern int pdc_type; /* Values for pdc_type */ @@ -673,88 +335,5 @@ static inline char * os_id_to_string(u16 os_id) { } } -#endif /* __KERNEL__ */ - -/* flags of the device_path */ -#define PF_AUTOBOOT 0x80 -#define PF_AUTOSEARCH 0x40 -#define PF_TIMER 0x0F - -struct device_path { /* page 1-69 */ - unsigned char flags; /* flags see above! */ - unsigned char bc[6]; /* bus converter routing info */ - unsigned char mod; - unsigned int layers[6];/* device-specific layer-info */ -} __attribute__((aligned(8))) ; - -struct pz_device { - struct device_path dp; /* see above */ - /* struct iomod *hpa; */ - unsigned int hpa; /* HPA base address */ - /* char *spa; */ - unsigned int spa; /* SPA base address */ - /* int (*iodc_io)(struct iomod*, ...); */ - unsigned int iodc_io; /* device entry point */ - short pad; /* reserved */ - unsigned short cl_class;/* see below */ -} __attribute__((aligned(8))) ; - -struct zeropage { - /* [0x000] initialize vectors (VEC) */ - unsigned int vec_special; /* must be zero */ - /* int (*vec_pow_fail)(void);*/ - unsigned int vec_pow_fail; /* power failure handler */ - /* int (*vec_toc)(void); */ - unsigned int vec_toc; - unsigned int vec_toclen; - /* int (*vec_rendz)(void); */ - unsigned int vec_rendz; - int vec_pow_fail_flen; - int vec_pad[10]; - - /* [0x040] reserved processor dependent */ - int pad0[112]; - - /* [0x200] reserved */ - int pad1[84]; - - /* [0x350] memory configuration (MC) */ - int memc_cont; /* contiguous mem size (bytes) */ - int memc_phsize; /* physical memory size */ - int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */ - unsigned int mem_pdc_hi; /* used for 64-bit */ - - /* [0x360] various parameters for the boot-CPU */ - /* unsigned int *mem_booterr[8]; */ - unsigned int mem_booterr[8]; /* ptr to boot errors */ - unsigned int mem_free; /* first location, where OS can be loaded */ - /* struct iomod *mem_hpa; */ - unsigned int mem_hpa; /* HPA of the boot-CPU */ - /* int (*mem_pdc)(int, ...); */ - unsigned int mem_pdc; /* PDC entry point */ - unsigned int mem_10msec; /* number of clock ticks in 10msec */ - - /* [0x390] initial memory module (IMM) */ - /* struct iomod *imm_hpa; */ - unsigned int imm_hpa; /* HPA of the IMM */ - int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */ - unsigned int imm_spa_size; /* SPA size of the IMM in bytes */ - unsigned int imm_max_mem; /* bytes of mem in IMM */ - - /* [0x3A0] boot console, display device and keyboard */ - struct pz_device mem_cons; /* description of console device */ - struct pz_device mem_boot; /* description of boot device */ - struct pz_device mem_kbd; /* description of keyboard device */ - - /* [0x430] reserved */ - int pad430[116]; - - /* [0x600] processor dependent */ - __u32 pad600[1]; - __u32 proc_sti; /* pointer to STI ROM */ - __u32 pad608[126]; -}; - #endif /* !defined(__ASSEMBLY__) */ - #endif /* _PARISC_PDC_H */ diff --git a/arch/parisc/include/asm/posix_types.h b/arch/parisc/include/asm/posix_types.h deleted file mode 100644 index b934425..0000000 --- a/arch/parisc/include/asm/posix_types.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __ARCH_PARISC_POSIX_TYPES_H -#define __ARCH_PARISC_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t - -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t - -typedef int __kernel_suseconds_t; -#define __kernel_suseconds_t __kernel_suseconds_t - -typedef long long __kernel_off64_t; -typedef unsigned long long __kernel_ino64_t; - -#include - -#endif diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h index 250ae35..a2db278 100644 --- a/arch/parisc/include/asm/ptrace.h +++ b/arch/parisc/include/asm/ptrace.h @@ -1,49 +1,11 @@ -#ifndef _PARISC_PTRACE_H -#define _PARISC_PTRACE_H - /* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg ** Copyright (C) 2000 Grant Grundler, Hewlett-Packard */ +#ifndef _PARISC_PTRACE_H +#define _PARISC_PTRACE_H -#include - -/* This struct defines the way the registers are stored on the - * stack during a system call. - * - * N.B. gdb/strace care about the size and offsets within this - * structure. If you change things, you may break object compatibility - * for those applications. - */ - -struct pt_regs { - unsigned long gr[32]; /* PSW is in gr[0] */ - __u64 fr[32]; - unsigned long sr[ 8]; - unsigned long iasq[2]; - unsigned long iaoq[2]; - unsigned long cr27; - unsigned long pad0; /* available for other uses */ - unsigned long orig_r28; - unsigned long ksp; - unsigned long kpc; - unsigned long sar; /* CR11 */ - unsigned long iir; /* CR19 */ - unsigned long isr; /* CR20 */ - unsigned long ior; /* CR21 */ - unsigned long ipsw; /* CR22 */ -}; - -/* - * The numbers chosen here are somewhat arbitrary but absolutely MUST - * not overlap with any of the number assigned in . - * - * These ones are taken from IA-64 on the assumption that theirs are - * the most correct (and we also want to support PTRACE_SINGLEBLOCK - * since we have taken branch traps too) - */ -#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */ +#include -#ifdef __KERNEL__ #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS)) @@ -58,6 +20,4 @@ struct pt_regs { unsigned long profile_pc(struct pt_regs *); -#endif /* __KERNEL__ */ - #endif diff --git a/arch/parisc/include/asm/resource.h b/arch/parisc/include/asm/resource.h deleted file mode 100644 index 8b06343..0000000 --- a/arch/parisc/include/asm/resource.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_PARISC_RESOURCE_H -#define _ASM_PARISC_RESOURCE_H - -#define _STK_LIM_MAX 10 * _STK_LIM -#include - -#endif diff --git a/arch/parisc/include/asm/sembuf.h b/arch/parisc/include/asm/sembuf.h deleted file mode 100644 index 1e59ffd..0000000 --- a/arch/parisc/include/asm/sembuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _PARISC_SEMBUF_H -#define _PARISC_SEMBUF_H - -/* - * The semid64_ds structure for parisc architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#ifndef CONFIG_64BIT - unsigned int __pad1; -#endif - __kernel_time_t sem_otime; /* last semop time */ -#ifndef CONFIG_64BIT - unsigned int __pad2; -#endif - __kernel_time_t sem_ctime; /* last change time */ - unsigned int sem_nsems; /* no. of semaphores in array */ - unsigned int __unused1; - unsigned int __unused2; -}; - -#endif /* _PARISC_SEMBUF_H */ diff --git a/arch/parisc/include/asm/setup.h b/arch/parisc/include/asm/setup.h deleted file mode 100644 index 7da2e5b..0000000 --- a/arch/parisc/include/asm/setup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PARISC_SETUP_H -#define _PARISC_SETUP_H - -#define COMMAND_LINE_SIZE 1024 - -#endif /* _PARISC_SETUP_H */ diff --git a/arch/parisc/include/asm/shmbuf.h b/arch/parisc/include/asm/shmbuf.h deleted file mode 100644 index 0a3eada..0000000 --- a/arch/parisc/include/asm/shmbuf.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _PARISC_SHMBUF_H -#define _PARISC_SHMBUF_H - -/* - * The shmid64_ds structure for parisc architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ -#ifndef CONFIG_64BIT - unsigned int __pad1; -#endif - __kernel_time_t shm_atime; /* last attach time */ -#ifndef CONFIG_64BIT - unsigned int __pad2; -#endif - __kernel_time_t shm_dtime; /* last detach time */ -#ifndef CONFIG_64BIT - unsigned int __pad3; -#endif - __kernel_time_t shm_ctime; /* last change time */ -#ifndef CONFIG_64BIT - unsigned int __pad4; -#endif - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned int shm_nattch; /* no. of current attaches */ - unsigned int __unused1; - unsigned int __unused2; -}; - -#ifdef CONFIG_64BIT -/* The 'unsigned int' (formerly 'unsigned long') data types below will - * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on - * a wide kernel, but if some of these values are meant to contain pointers - * they may need to be 'long long' instead. -PB XXX FIXME - */ -#endif -struct shminfo64 { - unsigned int shmmax; - unsigned int shmmin; - unsigned int shmmni; - unsigned int shmseg; - unsigned int shmall; - unsigned int __unused1; - unsigned int __unused2; - unsigned int __unused3; - unsigned int __unused4; -}; - -#endif /* _PARISC_SHMBUF_H */ diff --git a/arch/parisc/include/asm/sigcontext.h b/arch/parisc/include/asm/sigcontext.h deleted file mode 100644 index 27ef31b..0000000 --- a/arch/parisc/include/asm/sigcontext.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASMPARISC_SIGCONTEXT_H -#define _ASMPARISC_SIGCONTEXT_H - -#define PARISC_SC_FLAG_ONSTACK 1<<0 -#define PARISC_SC_FLAG_IN_SYSCALL 1<<1 - -/* We will add more stuff here as it becomes necessary, until we know - it works. */ -struct sigcontext { - unsigned long sc_flags; - - unsigned long sc_gr[32]; /* PSW in sc_gr[0] */ - unsigned long long sc_fr[32]; /* FIXME, do we need other state info? */ - unsigned long sc_iasq[2]; - unsigned long sc_iaoq[2]; - unsigned long sc_sar; /* cr11 */ -}; - - -#endif diff --git a/arch/parisc/include/asm/siginfo.h b/arch/parisc/include/asm/siginfo.h deleted file mode 100644 index d703472..0000000 --- a/arch/parisc/include/asm/siginfo.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _PARISC_SIGINFO_H -#define _PARISC_SIGINFO_H - -#include - -#undef NSIGTRAP -#define NSIGTRAP 4 - -#endif diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h index c203563..21abf4f 100644 --- a/arch/parisc/include/asm/signal.h +++ b/arch/parisc/include/asm/signal.h @@ -1,129 +1,19 @@ #ifndef _ASM_PARISC_SIGNAL_H #define _ASM_PARISC_SIGNAL_H -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGEMT 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGBUS 10 -#define SIGSEGV 11 -#define SIGSYS 12 /* Linux doesn't use this */ -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGUSR1 16 -#define SIGUSR2 17 -#define SIGCHLD 18 -#define SIGPWR 19 -#define SIGVTALRM 20 -#define SIGPROF 21 -#define SIGIO 22 -#define SIGPOLL SIGIO -#define SIGWINCH 23 -#define SIGSTOP 24 -#define SIGTSTP 25 -#define SIGCONT 26 -#define SIGTTIN 27 -#define SIGTTOU 28 -#define SIGURG 29 -#define SIGLOST 30 /* Linux doesn't use this either */ -#define SIGUNUSED 31 -#define SIGRESERVE SIGUNUSED +#include -#define SIGXCPU 33 -#define SIGXFSZ 34 -#define SIGSTKFLT 36 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 37 -#define SIGRTMAX _NSIG /* it's 44 under HP/UX */ - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_ONSTACK 0x00000001 -#define SA_RESETHAND 0x00000004 -#define SA_NOCLDSTOP 0x00000008 -#define SA_SIGINFO 0x00000010 -#define SA_NODEFER 0x00000020 -#define SA_RESTART 0x00000040 -#define SA_NOCLDWAIT 0x00000080 -#define _SA_SIGGFAULT 0x00000100 /* HPUX */ - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 /* obsolete -- ignored */ - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#ifdef __KERNEL__ #define _NSIG 64 /* bits-per-word, where word apparently means 'long' not 'int' */ #define _NSIG_BPW BITS_PER_LONG #define _NSIG_WORDS (_NSIG / _NSIG_BPW) -#endif /* __KERNEL__ */ - -#define SIG_BLOCK 0 /* for blocking signals */ -#define SIG_UNBLOCK 1 /* for unblocking signals */ -#define SIG_SETMASK 2 /* for setting the signal mask */ - -#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ -#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ -#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ - # ifndef __ASSEMBLY__ - -# include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -/* Type of a signal handler. */ #ifdef CONFIG_64BIT -/* function pointers on 64-bit parisc are pointers to little structs and the - * compiler doesn't support code which changes or tests the address of - * the function in the little struct. This is really ugly -PB - */ -typedef char __user *__sighandler_t; #else -typedef void __signalfn_t(int); -typedef __signalfn_t __user *__sighandler_t; #endif -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - /* Most things should be clean enough to redefine this at will, if care is taken to make libc match. */ @@ -148,6 +38,5 @@ struct k_sigaction { #include -#endif /* __KERNEL__ */ #endif /* !__ASSEMBLY */ #endif /* _ASM_PARISC_SIGNAL_H */ diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h deleted file mode 100644 index 1b52c2c..0000000 --- a/arch/parisc/include/asm/socket.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 0xffff - -#define SO_DEBUG 0x0001 -#define SO_REUSEADDR 0x0004 -#define SO_KEEPALIVE 0x0008 -#define SO_DONTROUTE 0x0010 -#define SO_BROADCAST 0x0020 -#define SO_LINGER 0x0080 -#define SO_OOBINLINE 0x0100 -/* To add :#define SO_REUSEPORT 0x0200 */ -#define SO_SNDBUF 0x1001 -#define SO_RCVBUF 0x1002 -#define SO_SNDBUFFORCE 0x100a -#define SO_RCVBUFFORCE 0x100b -#define SO_SNDLOWAT 0x1003 -#define SO_RCVLOWAT 0x1004 -#define SO_SNDTIMEO 0x1005 -#define SO_RCVTIMEO 0x1006 -#define SO_ERROR 0x1007 -#define SO_TYPE 0x1008 -#define SO_PROTOCOL 0x1028 -#define SO_DOMAIN 0x1029 -#define SO_PEERNAME 0x2000 - -#define SO_NO_CHECK 0x400b -#define SO_PRIORITY 0x400c -#define SO_BSDCOMPAT 0x400e -#define SO_PASSCRED 0x4010 -#define SO_PEERCRED 0x4011 -#define SO_TIMESTAMP 0x4012 -#define SCM_TIMESTAMP SO_TIMESTAMP -#define SO_TIMESTAMPNS 0x4013 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 0x4016 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x4017 -#define SO_SECURITY_ENCRYPTION_NETWORK 0x4018 - -#define SO_BINDTODEVICE 0x4019 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 0x401a -#define SO_DETACH_FILTER 0x401b - -#define SO_ACCEPTCONN 0x401c - -#define SO_PEERSEC 0x401d -#define SO_PASSSEC 0x401e - -#define SO_MARK 0x401f - -#define SO_TIMESTAMPING 0x4020 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_RXQ_OVFL 0x4021 - -#define SO_WIFI_STATUS 0x4022 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 0x4023 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 0x4024 - - -/* O_NONBLOCK clashes with the bits used for socket types. Therefore we - * have to define SOCK_NONBLOCK to a different value here. - */ -#define SOCK_NONBLOCK 0x40000000 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/parisc/include/asm/sockios.h b/arch/parisc/include/asm/sockios.h deleted file mode 100644 index dabfbc7..0000000 --- a/arch/parisc/include/asm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_PARISC_SOCKIOS__ -#define __ARCH_PARISC_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/arch/parisc/include/asm/stat.h b/arch/parisc/include/asm/stat.h deleted file mode 100644 index d76fbda..0000000 --- a/arch/parisc/include/asm/stat.h +++ /dev/null @@ -1,100 +0,0 @@ -#ifndef _PARISC_STAT_H -#define _PARISC_STAT_H - -#include - -struct stat { - unsigned int st_dev; /* dev_t is 32 bits on parisc */ - ino_t st_ino; /* 32 bits */ - mode_t st_mode; /* 16 bits */ - unsigned short st_nlink; /* 16 bits */ - unsigned short st_reserved1; /* old st_uid */ - unsigned short st_reserved2; /* old st_gid */ - unsigned int st_rdev; - off_t st_size; - time_t st_atime; - unsigned int st_atime_nsec; - time_t st_mtime; - unsigned int st_mtime_nsec; - time_t st_ctime; - unsigned int st_ctime_nsec; - int st_blksize; - int st_blocks; - unsigned int __unused1; /* ACL stuff */ - unsigned int __unused2; /* network */ - ino_t __unused3; /* network */ - unsigned int __unused4; /* cnodes */ - unsigned short __unused5; /* netsite */ - short st_fstype; - unsigned int st_realdev; - unsigned short st_basemode; - unsigned short st_spareshort; - uid_t st_uid; - gid_t st_gid; - unsigned int st_spare4[3]; -}; - -#define STAT_HAVE_NSEC - -typedef __kernel_off64_t off64_t; - -struct hpux_stat64 { - unsigned int st_dev; /* dev_t is 32 bits on parisc */ - ino_t st_ino; /* 32 bits */ - mode_t st_mode; /* 16 bits */ - unsigned short st_nlink; /* 16 bits */ - unsigned short st_reserved1; /* old st_uid */ - unsigned short st_reserved2; /* old st_gid */ - unsigned int st_rdev; - off64_t st_size; - time_t st_atime; - unsigned int st_spare1; - time_t st_mtime; - unsigned int st_spare2; - time_t st_ctime; - unsigned int st_spare3; - int st_blksize; - __u64 st_blocks; - unsigned int __unused1; /* ACL stuff */ - unsigned int __unused2; /* network */ - ino_t __unused3; /* network */ - unsigned int __unused4; /* cnodes */ - unsigned short __unused5; /* netsite */ - short st_fstype; - unsigned int st_realdev; - unsigned short st_basemode; - unsigned short st_spareshort; - uid_t st_uid; - gid_t st_gid; - unsigned int st_spare4[3]; -}; - -/* This is the struct that 32-bit userspace applications are expecting. - * How 64-bit apps are going to be compiled, I have no idea. But at least - * this way, we don't have a wrapper in the kernel. - */ -struct stat64 { - unsigned long long st_dev; - unsigned int __pad1; - - unsigned int __st_ino; /* Not actually filled in */ - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned long long st_rdev; - unsigned int __pad2; - signed long long st_size; - signed int st_blksize; - - signed long long st_blocks; - signed int st_atime; - unsigned int st_atime_nsec; - signed int st_mtime; - unsigned int st_mtime_nsec; - signed int st_ctime; - unsigned int st_ctime_nsec; - unsigned long long st_ino; -}; - -#endif diff --git a/arch/parisc/include/asm/statfs.h b/arch/parisc/include/asm/statfs.h deleted file mode 100644 index 324bea9..0000000 --- a/arch/parisc/include/asm/statfs.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _PARISC_STATFS_H -#define _PARISC_STATFS_H - -#define __statfs_word long -#include - -#endif diff --git a/arch/parisc/include/asm/swab.h b/arch/parisc/include/asm/swab.h deleted file mode 100644 index e78403b..0000000 --- a/arch/parisc/include/asm/swab.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _PARISC_SWAB_H -#define _PARISC_SWAB_H - -#include -#include - -#define __SWAB_64_THRU_32__ - -static inline __attribute_const__ __u16 __arch_swab16(__u16 x) -{ - __asm__("dep %0, 15, 8, %0\n\t" /* deposit 00ab -> 0bab */ - "shd %%r0, %0, 8, %0" /* shift 000000ab -> 00ba */ - : "=r" (x) - : "0" (x)); - return x; -} -#define __arch_swab16 __arch_swab16 - -static inline __attribute_const__ __u32 __arch_swab24(__u32 x) -{ - __asm__("shd %0, %0, 8, %0\n\t" /* shift xabcxabc -> cxab */ - "dep %0, 15, 8, %0\n\t" /* deposit cxab -> cbab */ - "shd %%r0, %0, 8, %0" /* shift 0000cbab -> 0cba */ - : "=r" (x) - : "0" (x)); - return x; -} - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - unsigned int temp; - __asm__("shd %0, %0, 16, %1\n\t" /* shift abcdabcd -> cdab */ - "dep %1, 15, 8, %1\n\t" /* deposit cdab -> cbab */ - "shd %0, %1, 8, %0" /* shift abcdcbab -> dcba */ - : "=r" (x), "=&r" (temp) - : "0" (x)); - return x; -} -#define __arch_swab32 __arch_swab32 - -#if BITS_PER_LONG > 32 -/* -** From "PA-RISC 2.0 Architecture", HP Professional Books. -** See Appendix I page 8 , "Endian Byte Swapping". -** -** Pretty cool algorithm: (* == zero'd bits) -** PERMH 01234567 -> 67452301 into %0 -** HSHL 67452301 -> 7*5*3*1* into %1 -** HSHR 67452301 -> *6*4*2*0 into %0 -** OR %0 | %1 -> 76543210 into %0 (all done!) -*/ -static inline __attribute_const__ __u64 __arch_swab64(__u64 x) -{ - __u64 temp; - __asm__("permh,3210 %0, %0\n\t" - "hshl %0, 8, %1\n\t" - "hshr,u %0, 8, %0\n\t" - "or %1, %0, %0" - : "=r" (x), "=&r" (temp) - : "0" (x)); - return x; -} -#define __arch_swab64 __arch_swab64 -#endif /* BITS_PER_LONG > 32 */ - -#endif /* _PARISC_SWAB_H */ diff --git a/arch/parisc/include/asm/termbits.h b/arch/parisc/include/asm/termbits.h deleted file mode 100644 index d1ab921..0000000 --- a/arch/parisc/include/asm/termbits.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef __ARCH_PARISC_TERMBITS_H__ -#define __ARCH_PARISC_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0040000 -#define IUTF8 0100000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif diff --git a/arch/parisc/include/asm/termios.h b/arch/parisc/include/asm/termios.h index a2a57a4..9bbc0c8 100644 --- a/arch/parisc/include/asm/termios.h +++ b/arch/parisc/include/asm/termios.h @@ -1,45 +1,8 @@ #ifndef _PARISC_TERMIOS_H #define _PARISC_TERMIOS_H -#include -#include +#include -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ /* intr=^C quit=^\ erase=del kill=^U eof=^D vtime=\0 vmin=\1 sxtc=\0 @@ -85,6 +48,4 @@ struct termio { #define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) #define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) -#endif /* __KERNEL__ */ - #endif /* _PARISC_TERMIOS_H */ diff --git a/arch/parisc/include/asm/types.h b/arch/parisc/include/asm/types.h deleted file mode 100644 index 8866f9b..0000000 --- a/arch/parisc/include/asm/types.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PARISC_TYPES_H -#define _PARISC_TYPES_H - -#include - -#endif diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index d61de64..541639c 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -1,840 +1,8 @@ #ifndef _ASM_PARISC_UNISTD_H_ #define _ASM_PARISC_UNISTD_H_ -/* - * This file contains the system call numbers. - */ - -/* - * HP-UX system calls get their native numbers for binary compatibility. - */ - -#define __NR_HPUX_exit 1 -#define __NR_HPUX_fork 2 -#define __NR_HPUX_read 3 -#define __NR_HPUX_write 4 -#define __NR_HPUX_open 5 -#define __NR_HPUX_close 6 -#define __NR_HPUX_wait 7 -#define __NR_HPUX_creat 8 -#define __NR_HPUX_link 9 -#define __NR_HPUX_unlink 10 -#define __NR_HPUX_execv 11 -#define __NR_HPUX_chdir 12 -#define __NR_HPUX_time 13 -#define __NR_HPUX_mknod 14 -#define __NR_HPUX_chmod 15 -#define __NR_HPUX_chown 16 -#define __NR_HPUX_break 17 -#define __NR_HPUX_lchmod 18 -#define __NR_HPUX_lseek 19 -#define __NR_HPUX_getpid 20 -#define __NR_HPUX_mount 21 -#define __NR_HPUX_umount 22 -#define __NR_HPUX_setuid 23 -#define __NR_HPUX_getuid 24 -#define __NR_HPUX_stime 25 -#define __NR_HPUX_ptrace 26 -#define __NR_HPUX_alarm 27 -#define __NR_HPUX_oldfstat 28 -#define __NR_HPUX_pause 29 -#define __NR_HPUX_utime 30 -#define __NR_HPUX_stty 31 -#define __NR_HPUX_gtty 32 -#define __NR_HPUX_access 33 -#define __NR_HPUX_nice 34 -#define __NR_HPUX_ftime 35 -#define __NR_HPUX_sync 36 -#define __NR_HPUX_kill 37 -#define __NR_HPUX_stat 38 -#define __NR_HPUX_setpgrp3 39 -#define __NR_HPUX_lstat 40 -#define __NR_HPUX_dup 41 -#define __NR_HPUX_pipe 42 -#define __NR_HPUX_times 43 -#define __NR_HPUX_profil 44 -#define __NR_HPUX_ki_call 45 -#define __NR_HPUX_setgid 46 -#define __NR_HPUX_getgid 47 -#define __NR_HPUX_sigsys 48 -#define __NR_HPUX_reserved1 49 -#define __NR_HPUX_reserved2 50 -#define __NR_HPUX_acct 51 -#define __NR_HPUX_set_userthreadid 52 -#define __NR_HPUX_oldlock 53 -#define __NR_HPUX_ioctl 54 -#define __NR_HPUX_reboot 55 -#define __NR_HPUX_symlink 56 -#define __NR_HPUX_utssys 57 -#define __NR_HPUX_readlink 58 -#define __NR_HPUX_execve 59 -#define __NR_HPUX_umask 60 -#define __NR_HPUX_chroot 61 -#define __NR_HPUX_fcntl 62 -#define __NR_HPUX_ulimit 63 -#define __NR_HPUX_getpagesize 64 -#define __NR_HPUX_mremap 65 -#define __NR_HPUX_vfork 66 -#define __NR_HPUX_vread 67 -#define __NR_HPUX_vwrite 68 -#define __NR_HPUX_sbrk 69 -#define __NR_HPUX_sstk 70 -#define __NR_HPUX_mmap 71 -#define __NR_HPUX_vadvise 72 -#define __NR_HPUX_munmap 73 -#define __NR_HPUX_mprotect 74 -#define __NR_HPUX_madvise 75 -#define __NR_HPUX_vhangup 76 -#define __NR_HPUX_swapoff 77 -#define __NR_HPUX_mincore 78 -#define __NR_HPUX_getgroups 79 -#define __NR_HPUX_setgroups 80 -#define __NR_HPUX_getpgrp2 81 -#define __NR_HPUX_setpgrp2 82 -#define __NR_HPUX_setitimer 83 -#define __NR_HPUX_wait3 84 -#define __NR_HPUX_swapon 85 -#define __NR_HPUX_getitimer 86 -#define __NR_HPUX_gethostname42 87 -#define __NR_HPUX_sethostname42 88 -#define __NR_HPUX_getdtablesize 89 -#define __NR_HPUX_dup2 90 -#define __NR_HPUX_getdopt 91 -#define __NR_HPUX_fstat 92 -#define __NR_HPUX_select 93 -#define __NR_HPUX_setdopt 94 -#define __NR_HPUX_fsync 95 -#define __NR_HPUX_setpriority 96 -#define __NR_HPUX_socket_old 97 -#define __NR_HPUX_connect_old 98 -#define __NR_HPUX_accept_old 99 -#define __NR_HPUX_getpriority 100 -#define __NR_HPUX_send_old 101 -#define __NR_HPUX_recv_old 102 -#define __NR_HPUX_socketaddr_old 103 -#define __NR_HPUX_bind_old 104 -#define __NR_HPUX_setsockopt_old 105 -#define __NR_HPUX_listen_old 106 -#define __NR_HPUX_vtimes_old 107 -#define __NR_HPUX_sigvector 108 -#define __NR_HPUX_sigblock 109 -#define __NR_HPUX_siggetmask 110 -#define __NR_HPUX_sigpause 111 -#define __NR_HPUX_sigstack 112 -#define __NR_HPUX_recvmsg_old 113 -#define __NR_HPUX_sendmsg_old 114 -#define __NR_HPUX_vtrace_old 115 -#define __NR_HPUX_gettimeofday 116 -#define __NR_HPUX_getrusage 117 -#define __NR_HPUX_getsockopt_old 118 -#define __NR_HPUX_resuba_old 119 -#define __NR_HPUX_readv 120 -#define __NR_HPUX_writev 121 -#define __NR_HPUX_settimeofday 122 -#define __NR_HPUX_fchown 123 -#define __NR_HPUX_fchmod 124 -#define __NR_HPUX_recvfrom_old 125 -#define __NR_HPUX_setresuid 126 -#define __NR_HPUX_setresgid 127 -#define __NR_HPUX_rename 128 -#define __NR_HPUX_truncate 129 -#define __NR_HPUX_ftruncate 130 -#define __NR_HPUX_flock_old 131 -#define __NR_HPUX_sysconf 132 -#define __NR_HPUX_sendto_old 133 -#define __NR_HPUX_shutdown_old 134 -#define __NR_HPUX_socketpair_old 135 -#define __NR_HPUX_mkdir 136 -#define __NR_HPUX_rmdir 137 -#define __NR_HPUX_utimes_old 138 -#define __NR_HPUX_sigcleanup_old 139 -#define __NR_HPUX_setcore 140 -#define __NR_HPUX_getpeername_old 141 -#define __NR_HPUX_gethostid 142 -#define __NR_HPUX_sethostid 143 -#define __NR_HPUX_getrlimit 144 -#define __NR_HPUX_setrlimit 145 -#define __NR_HPUX_killpg_old 146 -#define __NR_HPUX_cachectl 147 -#define __NR_HPUX_quotactl 148 -#define __NR_HPUX_get_sysinfo 149 -#define __NR_HPUX_getsockname_old 150 -#define __NR_HPUX_privgrp 151 -#define __NR_HPUX_rtprio 152 -#define __NR_HPUX_plock 153 -#define __NR_HPUX_reserved3 154 -#define __NR_HPUX_lockf 155 -#define __NR_HPUX_semget 156 -#define __NR_HPUX_osemctl 157 -#define __NR_HPUX_semop 158 -#define __NR_HPUX_msgget 159 -#define __NR_HPUX_omsgctl 160 -#define __NR_HPUX_msgsnd 161 -#define __NR_HPUX_msgrecv 162 -#define __NR_HPUX_shmget 163 -#define __NR_HPUX_oshmctl 164 -#define __NR_HPUX_shmat 165 -#define __NR_HPUX_shmdt 166 -#define __NR_HPUX_m68020_advise 167 -/* [168,189] are for Discless/DUX */ -#define __NR_HPUX_csp 168 -#define __NR_HPUX_cluster 169 -#define __NR_HPUX_mkrnod 170 -#define __NR_HPUX_test 171 -#define __NR_HPUX_unsp_open 172 -#define __NR_HPUX_reserved4 173 -#define __NR_HPUX_getcontext_old 174 -#define __NR_HPUX_osetcontext 175 -#define __NR_HPUX_bigio 176 -#define __NR_HPUX_pipenode 177 -#define __NR_HPUX_lsync 178 -#define __NR_HPUX_getmachineid 179 -#define __NR_HPUX_cnodeid 180 -#define __NR_HPUX_cnodes 181 -#define __NR_HPUX_swapclients 182 -#define __NR_HPUX_rmt_process 183 -#define __NR_HPUX_dskless_stats 184 -#define __NR_HPUX_sigprocmask 185 -#define __NR_HPUX_sigpending 186 -#define __NR_HPUX_sigsuspend 187 -#define __NR_HPUX_sigaction 188 -#define __NR_HPUX_reserved5 189 -#define __NR_HPUX_nfssvc 190 -#define __NR_HPUX_getfh 191 -#define __NR_HPUX_getdomainname 192 -#define __NR_HPUX_setdomainname 193 -#define __NR_HPUX_async_daemon 194 -#define __NR_HPUX_getdirentries 195 -#define __NR_HPUX_statfs 196 -#define __NR_HPUX_fstatfs 197 -#define __NR_HPUX_vfsmount 198 -#define __NR_HPUX_reserved6 199 -#define __NR_HPUX_waitpid 200 -/* 201 - 223 missing */ -#define __NR_HPUX_sigsetreturn 224 -#define __NR_HPUX_sigsetstatemask 225 -/* 226 missing */ -#define __NR_HPUX_cs 227 -#define __NR_HPUX_cds 228 -#define __NR_HPUX_set_no_trunc 229 -#define __NR_HPUX_pathconf 230 -#define __NR_HPUX_fpathconf 231 -/* 232, 233 missing */ -#define __NR_HPUX_nfs_fcntl 234 -#define __NR_HPUX_ogetacl 235 -#define __NR_HPUX_ofgetacl 236 -#define __NR_HPUX_osetacl 237 -#define __NR_HPUX_ofsetacl 238 -#define __NR_HPUX_pstat 239 -#define __NR_HPUX_getaudid 240 -#define __NR_HPUX_setaudid 241 -#define __NR_HPUX_getaudproc 242 -#define __NR_HPUX_setaudproc 243 -#define __NR_HPUX_getevent 244 -#define __NR_HPUX_setevent 245 -#define __NR_HPUX_audwrite 246 -#define __NR_HPUX_audswitch 247 -#define __NR_HPUX_audctl 248 -#define __NR_HPUX_ogetaccess 249 -#define __NR_HPUX_fsctl 250 -/* 251 - 258 missing */ -#define __NR_HPUX_swapfs 259 -#define __NR_HPUX_fss 260 -/* 261 - 266 missing */ -#define __NR_HPUX_tsync 267 -#define __NR_HPUX_getnumfds 268 -#define __NR_HPUX_poll 269 -#define __NR_HPUX_getmsg 270 -#define __NR_HPUX_putmsg 271 -#define __NR_HPUX_fchdir 272 -#define __NR_HPUX_getmount_cnt 273 -#define __NR_HPUX_getmount_entry 274 -#define __NR_HPUX_accept 275 -#define __NR_HPUX_bind 276 -#define __NR_HPUX_connect 277 -#define __NR_HPUX_getpeername 278 -#define __NR_HPUX_getsockname 279 -#define __NR_HPUX_getsockopt 280 -#define __NR_HPUX_listen 281 -#define __NR_HPUX_recv 282 -#define __NR_HPUX_recvfrom 283 -#define __NR_HPUX_recvmsg 284 -#define __NR_HPUX_send 285 -#define __NR_HPUX_sendmsg 286 -#define __NR_HPUX_sendto 287 -#define __NR_HPUX_setsockopt 288 -#define __NR_HPUX_shutdown 289 -#define __NR_HPUX_socket 290 -#define __NR_HPUX_socketpair 291 -#define __NR_HPUX_proc_open 292 -#define __NR_HPUX_proc_close 293 -#define __NR_HPUX_proc_send 294 -#define __NR_HPUX_proc_recv 295 -#define __NR_HPUX_proc_sendrecv 296 -#define __NR_HPUX_proc_syscall 297 -/* 298 - 311 missing */ -#define __NR_HPUX_semctl 312 -#define __NR_HPUX_msgctl 313 -#define __NR_HPUX_shmctl 314 -#define __NR_HPUX_mpctl 315 -#define __NR_HPUX_exportfs 316 -#define __NR_HPUX_getpmsg 317 -#define __NR_HPUX_putpmsg 318 -/* 319 missing */ -#define __NR_HPUX_msync 320 -#define __NR_HPUX_msleep 321 -#define __NR_HPUX_mwakeup 322 -#define __NR_HPUX_msem_init 323 -#define __NR_HPUX_msem_remove 324 -#define __NR_HPUX_adjtime 325 -#define __NR_HPUX_kload 326 -#define __NR_HPUX_fattach 327 -#define __NR_HPUX_fdetach 328 -#define __NR_HPUX_serialize 329 -#define __NR_HPUX_statvfs 330 -#define __NR_HPUX_fstatvfs 331 -#define __NR_HPUX_lchown 332 -#define __NR_HPUX_getsid 333 -#define __NR_HPUX_sysfs 334 -/* 335, 336 missing */ -#define __NR_HPUX_sched_setparam 337 -#define __NR_HPUX_sched_getparam 338 -#define __NR_HPUX_sched_setscheduler 339 -#define __NR_HPUX_sched_getscheduler 340 -#define __NR_HPUX_sched_yield 341 -#define __NR_HPUX_sched_get_priority_max 342 -#define __NR_HPUX_sched_get_priority_min 343 -#define __NR_HPUX_sched_rr_get_interval 344 -#define __NR_HPUX_clock_settime 345 -#define __NR_HPUX_clock_gettime 346 -#define __NR_HPUX_clock_getres 347 -#define __NR_HPUX_timer_create 348 -#define __NR_HPUX_timer_delete 349 -#define __NR_HPUX_timer_settime 350 -#define __NR_HPUX_timer_gettime 351 -#define __NR_HPUX_timer_getoverrun 352 -#define __NR_HPUX_nanosleep 353 -#define __NR_HPUX_toolbox 354 -/* 355 missing */ -#define __NR_HPUX_getdents 356 -#define __NR_HPUX_getcontext 357 -#define __NR_HPUX_sysinfo 358 -#define __NR_HPUX_fcntl64 359 -#define __NR_HPUX_ftruncate64 360 -#define __NR_HPUX_fstat64 361 -#define __NR_HPUX_getdirentries64 362 -#define __NR_HPUX_getrlimit64 363 -#define __NR_HPUX_lockf64 364 -#define __NR_HPUX_lseek64 365 -#define __NR_HPUX_lstat64 366 -#define __NR_HPUX_mmap64 367 -#define __NR_HPUX_setrlimit64 368 -#define __NR_HPUX_stat64 369 -#define __NR_HPUX_truncate64 370 -#define __NR_HPUX_ulimit64 371 -#define __NR_HPUX_pread 372 -#define __NR_HPUX_preadv 373 -#define __NR_HPUX_pwrite 374 -#define __NR_HPUX_pwritev 375 -#define __NR_HPUX_pread64 376 -#define __NR_HPUX_preadv64 377 -#define __NR_HPUX_pwrite64 378 -#define __NR_HPUX_pwritev64 379 -#define __NR_HPUX_setcontext 380 -#define __NR_HPUX_sigaltstack 381 -#define __NR_HPUX_waitid 382 -#define __NR_HPUX_setpgrp 383 -#define __NR_HPUX_recvmsg2 384 -#define __NR_HPUX_sendmsg2 385 -#define __NR_HPUX_socket2 386 -#define __NR_HPUX_socketpair2 387 -#define __NR_HPUX_setregid 388 -#define __NR_HPUX_lwp_create 389 -#define __NR_HPUX_lwp_terminate 390 -#define __NR_HPUX_lwp_wait 391 -#define __NR_HPUX_lwp_suspend 392 -#define __NR_HPUX_lwp_resume 393 -/* 394 missing */ -#define __NR_HPUX_lwp_abort_syscall 395 -#define __NR_HPUX_lwp_info 396 -#define __NR_HPUX_lwp_kill 397 -#define __NR_HPUX_ksleep 398 -#define __NR_HPUX_kwakeup 399 -/* 400 missing */ -#define __NR_HPUX_pstat_getlwp 401 -#define __NR_HPUX_lwp_exit 402 -#define __NR_HPUX_lwp_continue 403 -#define __NR_HPUX_getacl 404 -#define __NR_HPUX_fgetacl 405 -#define __NR_HPUX_setacl 406 -#define __NR_HPUX_fsetacl 407 -#define __NR_HPUX_getaccess 408 -#define __NR_HPUX_lwp_mutex_init 409 -#define __NR_HPUX_lwp_mutex_lock_sys 410 -#define __NR_HPUX_lwp_mutex_unlock 411 -#define __NR_HPUX_lwp_cond_init 412 -#define __NR_HPUX_lwp_cond_signal 413 -#define __NR_HPUX_lwp_cond_broadcast 414 -#define __NR_HPUX_lwp_cond_wait_sys 415 -#define __NR_HPUX_lwp_getscheduler 416 -#define __NR_HPUX_lwp_setscheduler 417 -#define __NR_HPUX_lwp_getstate 418 -#define __NR_HPUX_lwp_setstate 419 -#define __NR_HPUX_lwp_detach 420 -#define __NR_HPUX_mlock 421 -#define __NR_HPUX_munlock 422 -#define __NR_HPUX_mlockall 423 -#define __NR_HPUX_munlockall 424 -#define __NR_HPUX_shm_open 425 -#define __NR_HPUX_shm_unlink 426 -#define __NR_HPUX_sigqueue 427 -#define __NR_HPUX_sigwaitinfo 428 -#define __NR_HPUX_sigtimedwait 429 -#define __NR_HPUX_sigwait 430 -#define __NR_HPUX_aio_read 431 -#define __NR_HPUX_aio_write 432 -#define __NR_HPUX_lio_listio 433 -#define __NR_HPUX_aio_error 434 -#define __NR_HPUX_aio_return 435 -#define __NR_HPUX_aio_cancel 436 -#define __NR_HPUX_aio_suspend 437 -#define __NR_HPUX_aio_fsync 438 -#define __NR_HPUX_mq_open 439 -#define __NR_HPUX_mq_close 440 -#define __NR_HPUX_mq_unlink 441 -#define __NR_HPUX_mq_send 442 -#define __NR_HPUX_mq_receive 443 -#define __NR_HPUX_mq_notify 444 -#define __NR_HPUX_mq_setattr 445 -#define __NR_HPUX_mq_getattr 446 -#define __NR_HPUX_ksem_open 447 -#define __NR_HPUX_ksem_unlink 448 -#define __NR_HPUX_ksem_close 449 -#define __NR_HPUX_ksem_post 450 -#define __NR_HPUX_ksem_wait 451 -#define __NR_HPUX_ksem_read 452 -#define __NR_HPUX_ksem_trywait 453 -#define __NR_HPUX_lwp_rwlock_init 454 -#define __NR_HPUX_lwp_rwlock_destroy 455 -#define __NR_HPUX_lwp_rwlock_rdlock_sys 456 -#define __NR_HPUX_lwp_rwlock_wrlock_sys 457 -#define __NR_HPUX_lwp_rwlock_tryrdlock 458 -#define __NR_HPUX_lwp_rwlock_trywrlock 459 -#define __NR_HPUX_lwp_rwlock_unlock 460 -#define __NR_HPUX_ttrace 461 -#define __NR_HPUX_ttrace_wait 462 -#define __NR_HPUX_lf_wire_mem 463 -#define __NR_HPUX_lf_unwire_mem 464 -#define __NR_HPUX_lf_send_pin_map 465 -#define __NR_HPUX_lf_free_buf 466 -#define __NR_HPUX_lf_wait_nq 467 -#define __NR_HPUX_lf_wakeup_conn_q 468 -#define __NR_HPUX_lf_unused 469 -#define __NR_HPUX_lwp_sema_init 470 -#define __NR_HPUX_lwp_sema_post 471 -#define __NR_HPUX_lwp_sema_wait 472 -#define __NR_HPUX_lwp_sema_trywait 473 -#define __NR_HPUX_lwp_sema_destroy 474 -#define __NR_HPUX_statvfs64 475 -#define __NR_HPUX_fstatvfs64 476 -#define __NR_HPUX_msh_register 477 -#define __NR_HPUX_ptrace64 478 -#define __NR_HPUX_sendfile 479 -#define __NR_HPUX_sendpath 480 -#define __NR_HPUX_sendfile64 481 -#define __NR_HPUX_sendpath64 482 -#define __NR_HPUX_modload 483 -#define __NR_HPUX_moduload 484 -#define __NR_HPUX_modpath 485 -#define __NR_HPUX_getksym 486 -#define __NR_HPUX_modadm 487 -#define __NR_HPUX_modstat 488 -#define __NR_HPUX_lwp_detached_exit 489 -#define __NR_HPUX_crashconf 490 -#define __NR_HPUX_siginhibit 491 -#define __NR_HPUX_sigenable 492 -#define __NR_HPUX_spuctl 493 -#define __NR_HPUX_zerokernelsum 494 -#define __NR_HPUX_nfs_kstat 495 -#define __NR_HPUX_aio_read64 496 -#define __NR_HPUX_aio_write64 497 -#define __NR_HPUX_aio_error64 498 -#define __NR_HPUX_aio_return64 499 -#define __NR_HPUX_aio_cancel64 500 -#define __NR_HPUX_aio_suspend64 501 -#define __NR_HPUX_aio_fsync64 502 -#define __NR_HPUX_lio_listio64 503 -#define __NR_HPUX_recv2 504 -#define __NR_HPUX_recvfrom2 505 -#define __NR_HPUX_send2 506 -#define __NR_HPUX_sendto2 507 -#define __NR_HPUX_acl 508 -#define __NR_HPUX___cnx_p2p_ctl 509 -#define __NR_HPUX___cnx_gsched_ctl 510 -#define __NR_HPUX___cnx_pmon_ctl 511 - -#define __NR_HPUX_syscalls 512 - -/* - * Linux system call numbers. - * - * Cary Coutant says that we should just use another syscall gateway - * page to avoid clashing with the HPUX space, and I think he's right: - * it will would keep a branch out of our syscall entry path, at the - * very least. If we decide to change it later, we can ``just'' tweak - * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be - * 1024 or something. Oh, and recompile libc. =) - * - * 64-bit HPUX binaries get the syscall gateway address passed in a register - * from the kernel at startup, which seems a sane strategy. - */ - -#define __NR_Linux 0 -#define __NR_restart_syscall (__NR_Linux + 0) -#define __NR_exit (__NR_Linux + 1) -#define __NR_fork (__NR_Linux + 2) -#define __NR_read (__NR_Linux + 3) -#define __NR_write (__NR_Linux + 4) -#define __NR_open (__NR_Linux + 5) -#define __NR_close (__NR_Linux + 6) -#define __NR_waitpid (__NR_Linux + 7) -#define __NR_creat (__NR_Linux + 8) -#define __NR_link (__NR_Linux + 9) -#define __NR_unlink (__NR_Linux + 10) -#define __NR_execve (__NR_Linux + 11) -#define __NR_chdir (__NR_Linux + 12) -#define __NR_time (__NR_Linux + 13) -#define __NR_mknod (__NR_Linux + 14) -#define __NR_chmod (__NR_Linux + 15) -#define __NR_lchown (__NR_Linux + 16) -#define __NR_socket (__NR_Linux + 17) -#define __NR_stat (__NR_Linux + 18) -#define __NR_lseek (__NR_Linux + 19) -#define __NR_getpid (__NR_Linux + 20) -#define __NR_mount (__NR_Linux + 21) -#define __NR_bind (__NR_Linux + 22) -#define __NR_setuid (__NR_Linux + 23) -#define __NR_getuid (__NR_Linux + 24) -#define __NR_stime (__NR_Linux + 25) -#define __NR_ptrace (__NR_Linux + 26) -#define __NR_alarm (__NR_Linux + 27) -#define __NR_fstat (__NR_Linux + 28) -#define __NR_pause (__NR_Linux + 29) -#define __NR_utime (__NR_Linux + 30) -#define __NR_connect (__NR_Linux + 31) -#define __NR_listen (__NR_Linux + 32) -#define __NR_access (__NR_Linux + 33) -#define __NR_nice (__NR_Linux + 34) -#define __NR_accept (__NR_Linux + 35) -#define __NR_sync (__NR_Linux + 36) -#define __NR_kill (__NR_Linux + 37) -#define __NR_rename (__NR_Linux + 38) -#define __NR_mkdir (__NR_Linux + 39) -#define __NR_rmdir (__NR_Linux + 40) -#define __NR_dup (__NR_Linux + 41) -#define __NR_pipe (__NR_Linux + 42) -#define __NR_times (__NR_Linux + 43) -#define __NR_getsockname (__NR_Linux + 44) -#define __NR_brk (__NR_Linux + 45) -#define __NR_setgid (__NR_Linux + 46) -#define __NR_getgid (__NR_Linux + 47) -#define __NR_signal (__NR_Linux + 48) -#define __NR_geteuid (__NR_Linux + 49) -#define __NR_getegid (__NR_Linux + 50) -#define __NR_acct (__NR_Linux + 51) -#define __NR_umount2 (__NR_Linux + 52) -#define __NR_getpeername (__NR_Linux + 53) -#define __NR_ioctl (__NR_Linux + 54) -#define __NR_fcntl (__NR_Linux + 55) -#define __NR_socketpair (__NR_Linux + 56) -#define __NR_setpgid (__NR_Linux + 57) -#define __NR_send (__NR_Linux + 58) -#define __NR_uname (__NR_Linux + 59) -#define __NR_umask (__NR_Linux + 60) -#define __NR_chroot (__NR_Linux + 61) -#define __NR_ustat (__NR_Linux + 62) -#define __NR_dup2 (__NR_Linux + 63) -#define __NR_getppid (__NR_Linux + 64) -#define __NR_getpgrp (__NR_Linux + 65) -#define __NR_setsid (__NR_Linux + 66) -#define __NR_pivot_root (__NR_Linux + 67) -#define __NR_sgetmask (__NR_Linux + 68) -#define __NR_ssetmask (__NR_Linux + 69) -#define __NR_setreuid (__NR_Linux + 70) -#define __NR_setregid (__NR_Linux + 71) -#define __NR_mincore (__NR_Linux + 72) -#define __NR_sigpending (__NR_Linux + 73) -#define __NR_sethostname (__NR_Linux + 74) -#define __NR_setrlimit (__NR_Linux + 75) -#define __NR_getrlimit (__NR_Linux + 76) -#define __NR_getrusage (__NR_Linux + 77) -#define __NR_gettimeofday (__NR_Linux + 78) -#define __NR_settimeofday (__NR_Linux + 79) -#define __NR_getgroups (__NR_Linux + 80) -#define __NR_setgroups (__NR_Linux + 81) -#define __NR_sendto (__NR_Linux + 82) -#define __NR_symlink (__NR_Linux + 83) -#define __NR_lstat (__NR_Linux + 84) -#define __NR_readlink (__NR_Linux + 85) -#define __NR_uselib (__NR_Linux + 86) -#define __NR_swapon (__NR_Linux + 87) -#define __NR_reboot (__NR_Linux + 88) -#define __NR_mmap2 (__NR_Linux + 89) -#define __NR_mmap (__NR_Linux + 90) -#define __NR_munmap (__NR_Linux + 91) -#define __NR_truncate (__NR_Linux + 92) -#define __NR_ftruncate (__NR_Linux + 93) -#define __NR_fchmod (__NR_Linux + 94) -#define __NR_fchown (__NR_Linux + 95) -#define __NR_getpriority (__NR_Linux + 96) -#define __NR_setpriority (__NR_Linux + 97) -#define __NR_recv (__NR_Linux + 98) -#define __NR_statfs (__NR_Linux + 99) -#define __NR_fstatfs (__NR_Linux + 100) -#define __NR_stat64 (__NR_Linux + 101) -/* #define __NR_socketcall (__NR_Linux + 102) */ -#define __NR_syslog (__NR_Linux + 103) -#define __NR_setitimer (__NR_Linux + 104) -#define __NR_getitimer (__NR_Linux + 105) -#define __NR_capget (__NR_Linux + 106) -#define __NR_capset (__NR_Linux + 107) -#define __NR_pread64 (__NR_Linux + 108) -#define __NR_pwrite64 (__NR_Linux + 109) -#define __NR_getcwd (__NR_Linux + 110) -#define __NR_vhangup (__NR_Linux + 111) -#define __NR_fstat64 (__NR_Linux + 112) -#define __NR_vfork (__NR_Linux + 113) -#define __NR_wait4 (__NR_Linux + 114) -#define __NR_swapoff (__NR_Linux + 115) -#define __NR_sysinfo (__NR_Linux + 116) -#define __NR_shutdown (__NR_Linux + 117) -#define __NR_fsync (__NR_Linux + 118) -#define __NR_madvise (__NR_Linux + 119) -#define __NR_clone (__NR_Linux + 120) -#define __NR_setdomainname (__NR_Linux + 121) -#define __NR_sendfile (__NR_Linux + 122) -#define __NR_recvfrom (__NR_Linux + 123) -#define __NR_adjtimex (__NR_Linux + 124) -#define __NR_mprotect (__NR_Linux + 125) -#define __NR_sigprocmask (__NR_Linux + 126) -#define __NR_create_module (__NR_Linux + 127) -#define __NR_init_module (__NR_Linux + 128) -#define __NR_delete_module (__NR_Linux + 129) -#define __NR_get_kernel_syms (__NR_Linux + 130) -#define __NR_quotactl (__NR_Linux + 131) -#define __NR_getpgid (__NR_Linux + 132) -#define __NR_fchdir (__NR_Linux + 133) -#define __NR_bdflush (__NR_Linux + 134) -#define __NR_sysfs (__NR_Linux + 135) -#define __NR_personality (__NR_Linux + 136) -#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */ -#define __NR_setfsuid (__NR_Linux + 138) -#define __NR_setfsgid (__NR_Linux + 139) -#define __NR__llseek (__NR_Linux + 140) -#define __NR_getdents (__NR_Linux + 141) -#define __NR__newselect (__NR_Linux + 142) -#define __NR_flock (__NR_Linux + 143) -#define __NR_msync (__NR_Linux + 144) -#define __NR_readv (__NR_Linux + 145) -#define __NR_writev (__NR_Linux + 146) -#define __NR_getsid (__NR_Linux + 147) -#define __NR_fdatasync (__NR_Linux + 148) -#define __NR__sysctl (__NR_Linux + 149) -#define __NR_mlock (__NR_Linux + 150) -#define __NR_munlock (__NR_Linux + 151) -#define __NR_mlockall (__NR_Linux + 152) -#define __NR_munlockall (__NR_Linux + 153) -#define __NR_sched_setparam (__NR_Linux + 154) -#define __NR_sched_getparam (__NR_Linux + 155) -#define __NR_sched_setscheduler (__NR_Linux + 156) -#define __NR_sched_getscheduler (__NR_Linux + 157) -#define __NR_sched_yield (__NR_Linux + 158) -#define __NR_sched_get_priority_max (__NR_Linux + 159) -#define __NR_sched_get_priority_min (__NR_Linux + 160) -#define __NR_sched_rr_get_interval (__NR_Linux + 161) -#define __NR_nanosleep (__NR_Linux + 162) -#define __NR_mremap (__NR_Linux + 163) -#define __NR_setresuid (__NR_Linux + 164) -#define __NR_getresuid (__NR_Linux + 165) -#define __NR_sigaltstack (__NR_Linux + 166) -#define __NR_query_module (__NR_Linux + 167) -#define __NR_poll (__NR_Linux + 168) -#define __NR_nfsservctl (__NR_Linux + 169) -#define __NR_setresgid (__NR_Linux + 170) -#define __NR_getresgid (__NR_Linux + 171) -#define __NR_prctl (__NR_Linux + 172) -#define __NR_rt_sigreturn (__NR_Linux + 173) -#define __NR_rt_sigaction (__NR_Linux + 174) -#define __NR_rt_sigprocmask (__NR_Linux + 175) -#define __NR_rt_sigpending (__NR_Linux + 176) -#define __NR_rt_sigtimedwait (__NR_Linux + 177) -#define __NR_rt_sigqueueinfo (__NR_Linux + 178) -#define __NR_rt_sigsuspend (__NR_Linux + 179) -#define __NR_chown (__NR_Linux + 180) -#define __NR_setsockopt (__NR_Linux + 181) -#define __NR_getsockopt (__NR_Linux + 182) -#define __NR_sendmsg (__NR_Linux + 183) -#define __NR_recvmsg (__NR_Linux + 184) -#define __NR_semop (__NR_Linux + 185) -#define __NR_semget (__NR_Linux + 186) -#define __NR_semctl (__NR_Linux + 187) -#define __NR_msgsnd (__NR_Linux + 188) -#define __NR_msgrcv (__NR_Linux + 189) -#define __NR_msgget (__NR_Linux + 190) -#define __NR_msgctl (__NR_Linux + 191) -#define __NR_shmat (__NR_Linux + 192) -#define __NR_shmdt (__NR_Linux + 193) -#define __NR_shmget (__NR_Linux + 194) -#define __NR_shmctl (__NR_Linux + 195) - -#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */ -#define __NR_putpmsg (__NR_Linux + 197) - -#define __NR_lstat64 (__NR_Linux + 198) -#define __NR_truncate64 (__NR_Linux + 199) -#define __NR_ftruncate64 (__NR_Linux + 200) -#define __NR_getdents64 (__NR_Linux + 201) -#define __NR_fcntl64 (__NR_Linux + 202) -#define __NR_attrctl (__NR_Linux + 203) -#define __NR_acl_get (__NR_Linux + 204) -#define __NR_acl_set (__NR_Linux + 205) -#define __NR_gettid (__NR_Linux + 206) -#define __NR_readahead (__NR_Linux + 207) -#define __NR_tkill (__NR_Linux + 208) -#define __NR_sendfile64 (__NR_Linux + 209) -#define __NR_futex (__NR_Linux + 210) -#define __NR_sched_setaffinity (__NR_Linux + 211) -#define __NR_sched_getaffinity (__NR_Linux + 212) -#define __NR_set_thread_area (__NR_Linux + 213) -#define __NR_get_thread_area (__NR_Linux + 214) -#define __NR_io_setup (__NR_Linux + 215) -#define __NR_io_destroy (__NR_Linux + 216) -#define __NR_io_getevents (__NR_Linux + 217) -#define __NR_io_submit (__NR_Linux + 218) -#define __NR_io_cancel (__NR_Linux + 219) -#define __NR_alloc_hugepages (__NR_Linux + 220) -#define __NR_free_hugepages (__NR_Linux + 221) -#define __NR_exit_group (__NR_Linux + 222) -#define __NR_lookup_dcookie (__NR_Linux + 223) -#define __NR_epoll_create (__NR_Linux + 224) -#define __NR_epoll_ctl (__NR_Linux + 225) -#define __NR_epoll_wait (__NR_Linux + 226) -#define __NR_remap_file_pages (__NR_Linux + 227) -#define __NR_semtimedop (__NR_Linux + 228) -#define __NR_mq_open (__NR_Linux + 229) -#define __NR_mq_unlink (__NR_Linux + 230) -#define __NR_mq_timedsend (__NR_Linux + 231) -#define __NR_mq_timedreceive (__NR_Linux + 232) -#define __NR_mq_notify (__NR_Linux + 233) -#define __NR_mq_getsetattr (__NR_Linux + 234) -#define __NR_waitid (__NR_Linux + 235) -#define __NR_fadvise64_64 (__NR_Linux + 236) -#define __NR_set_tid_address (__NR_Linux + 237) -#define __NR_setxattr (__NR_Linux + 238) -#define __NR_lsetxattr (__NR_Linux + 239) -#define __NR_fsetxattr (__NR_Linux + 240) -#define __NR_getxattr (__NR_Linux + 241) -#define __NR_lgetxattr (__NR_Linux + 242) -#define __NR_fgetxattr (__NR_Linux + 243) -#define __NR_listxattr (__NR_Linux + 244) -#define __NR_llistxattr (__NR_Linux + 245) -#define __NR_flistxattr (__NR_Linux + 246) -#define __NR_removexattr (__NR_Linux + 247) -#define __NR_lremovexattr (__NR_Linux + 248) -#define __NR_fremovexattr (__NR_Linux + 249) -#define __NR_timer_create (__NR_Linux + 250) -#define __NR_timer_settime (__NR_Linux + 251) -#define __NR_timer_gettime (__NR_Linux + 252) -#define __NR_timer_getoverrun (__NR_Linux + 253) -#define __NR_timer_delete (__NR_Linux + 254) -#define __NR_clock_settime (__NR_Linux + 255) -#define __NR_clock_gettime (__NR_Linux + 256) -#define __NR_clock_getres (__NR_Linux + 257) -#define __NR_clock_nanosleep (__NR_Linux + 258) -#define __NR_tgkill (__NR_Linux + 259) -#define __NR_mbind (__NR_Linux + 260) -#define __NR_get_mempolicy (__NR_Linux + 261) -#define __NR_set_mempolicy (__NR_Linux + 262) -#define __NR_vserver (__NR_Linux + 263) -#define __NR_add_key (__NR_Linux + 264) -#define __NR_request_key (__NR_Linux + 265) -#define __NR_keyctl (__NR_Linux + 266) -#define __NR_ioprio_set (__NR_Linux + 267) -#define __NR_ioprio_get (__NR_Linux + 268) -#define __NR_inotify_init (__NR_Linux + 269) -#define __NR_inotify_add_watch (__NR_Linux + 270) -#define __NR_inotify_rm_watch (__NR_Linux + 271) -#define __NR_migrate_pages (__NR_Linux + 272) -#define __NR_pselect6 (__NR_Linux + 273) -#define __NR_ppoll (__NR_Linux + 274) -#define __NR_openat (__NR_Linux + 275) -#define __NR_mkdirat (__NR_Linux + 276) -#define __NR_mknodat (__NR_Linux + 277) -#define __NR_fchownat (__NR_Linux + 278) -#define __NR_futimesat (__NR_Linux + 279) -#define __NR_fstatat64 (__NR_Linux + 280) -#define __NR_unlinkat (__NR_Linux + 281) -#define __NR_renameat (__NR_Linux + 282) -#define __NR_linkat (__NR_Linux + 283) -#define __NR_symlinkat (__NR_Linux + 284) -#define __NR_readlinkat (__NR_Linux + 285) -#define __NR_fchmodat (__NR_Linux + 286) -#define __NR_faccessat (__NR_Linux + 287) -#define __NR_unshare (__NR_Linux + 288) -#define __NR_set_robust_list (__NR_Linux + 289) -#define __NR_get_robust_list (__NR_Linux + 290) -#define __NR_splice (__NR_Linux + 291) -#define __NR_sync_file_range (__NR_Linux + 292) -#define __NR_tee (__NR_Linux + 293) -#define __NR_vmsplice (__NR_Linux + 294) -#define __NR_move_pages (__NR_Linux + 295) -#define __NR_getcpu (__NR_Linux + 296) -#define __NR_epoll_pwait (__NR_Linux + 297) -#define __NR_statfs64 (__NR_Linux + 298) -#define __NR_fstatfs64 (__NR_Linux + 299) -#define __NR_kexec_load (__NR_Linux + 300) -#define __NR_utimensat (__NR_Linux + 301) -#define __NR_signalfd (__NR_Linux + 302) -#define __NR_timerfd (__NR_Linux + 303) -#define __NR_eventfd (__NR_Linux + 304) -#define __NR_fallocate (__NR_Linux + 305) -#define __NR_timerfd_create (__NR_Linux + 306) -#define __NR_timerfd_settime (__NR_Linux + 307) -#define __NR_timerfd_gettime (__NR_Linux + 308) -#define __NR_signalfd4 (__NR_Linux + 309) -#define __NR_eventfd2 (__NR_Linux + 310) -#define __NR_epoll_create1 (__NR_Linux + 311) -#define __NR_dup3 (__NR_Linux + 312) -#define __NR_pipe2 (__NR_Linux + 313) -#define __NR_inotify_init1 (__NR_Linux + 314) -#define __NR_preadv (__NR_Linux + 315) -#define __NR_pwritev (__NR_Linux + 316) -#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317) -#define __NR_perf_event_open (__NR_Linux + 318) -#define __NR_recvmmsg (__NR_Linux + 319) -#define __NR_accept4 (__NR_Linux + 320) -#define __NR_prlimit64 (__NR_Linux + 321) -#define __NR_fanotify_init (__NR_Linux + 322) -#define __NR_fanotify_mark (__NR_Linux + 323) -#define __NR_clock_adjtime (__NR_Linux + 324) -#define __NR_name_to_handle_at (__NR_Linux + 325) -#define __NR_open_by_handle_at (__NR_Linux + 326) -#define __NR_syncfs (__NR_Linux + 327) -#define __NR_setns (__NR_Linux + 328) -#define __NR_sendmmsg (__NR_Linux + 329) - -#define __NR_Linux_syscalls (__NR_sendmmsg + 1) - - -#define __IGNORE_select /* newselect */ -#define __IGNORE_fadvise64 /* fadvise64_64 */ -#define __IGNORE_utimes /* utime */ - - -#define HPUX_GATEWAY_ADDR 0xC0000004 -#define LINUX_GATEWAY_ADDR 0x100 +#include -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ #define SYS_ify(syscall_name) __NR_##syscall_name @@ -1008,5 +176,4 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \ */ #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif /* __KERNEL__ */ #endif /* _ASM_PARISC_UNISTD_H_ */ diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild index baebb3d..a580642 100644 --- a/arch/parisc/include/uapi/asm/Kbuild +++ b/arch/parisc/include/uapi/asm/Kbuild @@ -1,3 +1,31 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += bitsperlong.h +header-y += byteorder.h +header-y += errno.h +header-y += fcntl.h +header-y += ioctl.h +header-y += ioctls.h +header-y += ipcbuf.h +header-y += mman.h +header-y += msgbuf.h +header-y += pdc.h +header-y += posix_types.h +header-y += ptrace.h +header-y += resource.h +header-y += sembuf.h +header-y += setup.h +header-y += shmbuf.h +header-y += sigcontext.h +header-y += siginfo.h +header-y += signal.h +header-y += socket.h +header-y += sockios.h +header-y += stat.h +header-y += statfs.h +header-y += swab.h +header-y += termbits.h +header-y += termios.h +header-y += types.h +header-y += unistd.h diff --git a/arch/parisc/include/uapi/asm/bitsperlong.h b/arch/parisc/include/uapi/asm/bitsperlong.h new file mode 100644 index 0000000..75196b4 --- /dev/null +++ b/arch/parisc/include/uapi/asm/bitsperlong.h @@ -0,0 +1,20 @@ +#ifndef __ASM_PARISC_BITSPERLONG_H +#define __ASM_PARISC_BITSPERLONG_H + +/* + * using CONFIG_* outside of __KERNEL__ is wrong, + * __LP64__ was also removed from headers, so what + * is the right approach on parisc? + * -arnd + */ +#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__) +#define __BITS_PER_LONG 64 +#define SHIFT_PER_LONG 6 +#else +#define __BITS_PER_LONG 32 +#define SHIFT_PER_LONG 5 +#endif + +#include + +#endif /* __ASM_PARISC_BITSPERLONG_H */ diff --git a/arch/parisc/include/uapi/asm/byteorder.h b/arch/parisc/include/uapi/asm/byteorder.h new file mode 100644 index 0000000..58af2c5 --- /dev/null +++ b/arch/parisc/include/uapi/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _PARISC_BYTEORDER_H +#define _PARISC_BYTEORDER_H + +#include + +#endif /* _PARISC_BYTEORDER_H */ diff --git a/arch/parisc/include/uapi/asm/errno.h b/arch/parisc/include/uapi/asm/errno.h new file mode 100644 index 0000000..135ad60 --- /dev/null +++ b/arch/parisc/include/uapi/asm/errno.h @@ -0,0 +1,127 @@ +#ifndef _PARISC_ERRNO_H +#define _PARISC_ERRNO_H + +#include + +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define EDEADLOCK EDEADLK +#define ENOLCK 46 /* No record locks available */ +#define EILSEQ 47 /* Illegal byte sequence */ + +#define ENONET 50 /* Machine is not on the network */ +#define ENODATA 51 /* No data available */ +#define ETIME 52 /* Timer expired */ +#define ENOSR 53 /* Out of streams resources */ +#define ENOSTR 54 /* Device not a stream */ +#define ENOPKG 55 /* Package not installed */ + +#define ENOLINK 57 /* Link has been severed */ +#define EADV 58 /* Advertise error */ +#define ESRMNT 59 /* Srmount error */ +#define ECOMM 60 /* Communication error on send */ +#define EPROTO 61 /* Protocol error */ + +#define EMULTIHOP 64 /* Multihop attempted */ + +#define EDOTDOT 66 /* RFS specific error */ +#define EBADMSG 67 /* Not a data message */ +#define EUSERS 68 /* Too many users */ +#define EDQUOT 69 /* Quota exceeded */ +#define ESTALE 70 /* Stale NFS file handle */ +#define EREMOTE 71 /* Object is remote */ +#define EOVERFLOW 72 /* Value too large for defined data type */ + +/* these errnos are defined by Linux but not HPUX. */ + +#define EBADE 160 /* Invalid exchange */ +#define EBADR 161 /* Invalid request descriptor */ +#define EXFULL 162 /* Exchange full */ +#define ENOANO 163 /* No anode */ +#define EBADRQC 164 /* Invalid request code */ +#define EBADSLT 165 /* Invalid slot */ +#define EBFONT 166 /* Bad font file format */ +#define ENOTUNIQ 167 /* Name not unique on network */ +#define EBADFD 168 /* File descriptor in bad state */ +#define EREMCHG 169 /* Remote address changed */ +#define ELIBACC 170 /* Can not access a needed shared library */ +#define ELIBBAD 171 /* Accessing a corrupted shared library */ +#define ELIBSCN 172 /* .lib section in a.out corrupted */ +#define ELIBMAX 173 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 174 /* Cannot exec a shared library directly */ +#define ERESTART 175 /* Interrupted system call should be restarted */ +#define ESTRPIPE 176 /* Streams pipe error */ +#define EUCLEAN 177 /* Structure needs cleaning */ +#define ENOTNAM 178 /* Not a XENIX named type file */ +#define ENAVAIL 179 /* No XENIX semaphores available */ +#define EISNAM 180 /* Is a named type file */ +#define EREMOTEIO 181 /* Remote I/O error */ +#define ENOMEDIUM 182 /* No medium found */ +#define EMEDIUMTYPE 183 /* Wrong medium type */ +#define ENOKEY 184 /* Required key not available */ +#define EKEYEXPIRED 185 /* Key has expired */ +#define EKEYREVOKED 186 /* Key has been revoked */ +#define EKEYREJECTED 187 /* Key was rejected by service */ + +/* We now return you to your regularly scheduled HPUX. */ + +#define ENOSYM 215 /* symbol does not exist in executable */ +#define ENOTSOCK 216 /* Socket operation on non-socket */ +#define EDESTADDRREQ 217 /* Destination address required */ +#define EMSGSIZE 218 /* Message too long */ +#define EPROTOTYPE 219 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 220 /* Protocol not available */ +#define EPROTONOSUPPORT 221 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 222 /* Socket type not supported */ +#define EOPNOTSUPP 223 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 224 /* Protocol family not supported */ +#define EAFNOSUPPORT 225 /* Address family not supported by protocol */ +#define EADDRINUSE 226 /* Address already in use */ +#define EADDRNOTAVAIL 227 /* Cannot assign requested address */ +#define ENETDOWN 228 /* Network is down */ +#define ENETUNREACH 229 /* Network is unreachable */ +#define ENETRESET 230 /* Network dropped connection because of reset */ +#define ECONNABORTED 231 /* Software caused connection abort */ +#define ECONNRESET 232 /* Connection reset by peer */ +#define ENOBUFS 233 /* No buffer space available */ +#define EISCONN 234 /* Transport endpoint is already connected */ +#define ENOTCONN 235 /* Transport endpoint is not connected */ +#define ESHUTDOWN 236 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 237 /* Too many references: cannot splice */ +#define EREFUSED ECONNREFUSED /* for HP's NFS apparently */ +#define ETIMEDOUT 238 /* Connection timed out */ +#define ECONNREFUSED 239 /* Connection refused */ +#define EREMOTERELEASE 240 /* Remote peer released connection */ +#define EHOSTDOWN 241 /* Host is down */ +#define EHOSTUNREACH 242 /* No route to host */ + +#define EALREADY 244 /* Operation already in progress */ +#define EINPROGRESS 245 /* Operation now in progress */ +#define EWOULDBLOCK 246 /* Operation would block (Linux returns EAGAIN) */ +#define ENOTEMPTY 247 /* Directory not empty */ +#define ENAMETOOLONG 248 /* File name too long */ +#define ELOOP 249 /* Too many symbolic links encountered */ +#define ENOSYS 251 /* Function not implemented */ + +#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */ +#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */ +#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */ + +/* for robust mutexes */ +#define EOWNERDEAD 254 /* Owner died */ +#define ENOTRECOVERABLE 255 /* State not recoverable */ + +#define ERFKILL 256 /* Operation not possible due to RF-kill */ + +#define EHWPOISON 257 /* Memory page has hardware error */ + +#endif diff --git a/arch/parisc/include/uapi/asm/fcntl.h b/arch/parisc/include/uapi/asm/fcntl.h new file mode 100644 index 0000000..0304b92 --- /dev/null +++ b/arch/parisc/include/uapi/asm/fcntl.h @@ -0,0 +1,40 @@ +#ifndef _PARISC_FCNTL_H +#define _PARISC_FCNTL_H + +#define O_APPEND 000000010 +#define O_BLKSEEK 000000100 /* HPUX only */ +#define O_CREAT 000000400 /* not fcntl */ +#define O_EXCL 000002000 /* not fcntl */ +#define O_LARGEFILE 000004000 +#define __O_SYNC 000100000 +#define O_SYNC (__O_SYNC|O_DSYNC) +#define O_NONBLOCK 000200004 /* HPUX has separate NDELAY & NONBLOCK */ +#define O_NOCTTY 000400000 /* not fcntl */ +#define O_DSYNC 001000000 /* HPUX only */ +#define O_RSYNC 002000000 /* HPUX only */ +#define O_NOATIME 004000000 +#define O_CLOEXEC 010000000 /* set close_on_exec */ + +#define O_DIRECTORY 000010000 /* must be a directory */ +#define O_NOFOLLOW 000000200 /* don't follow links */ +#define O_INVISIBLE 004000000 /* invisible I/O, for DMAPI/XDSM */ + +#define O_PATH 020000000 + +#define F_GETLK64 8 +#define F_SETLK64 9 +#define F_SETLKW64 10 + +#define F_GETOWN 11 /* for sockets. */ +#define F_SETOWN 12 /* for sockets. */ +#define F_SETSIG 13 /* for sockets. */ +#define F_GETSIG 14 /* for sockets. */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 01 +#define F_WRLCK 02 +#define F_UNLCK 03 + +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/ioctl.h b/arch/parisc/include/uapi/asm/ioctl.h new file mode 100644 index 0000000..ec8efa0 --- /dev/null +++ b/arch/parisc/include/uapi/asm/ioctl.h @@ -0,0 +1,44 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org > + * portions from "linux/ioctl.h for Linux" by H.H. Bergman. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#ifndef _ASM_PARISC_IOCTL_H +#define _ASM_PARISC_IOCTL_H + +/* ioctl command encoding: 32 bits total, command in lower 16 bits, + * size of the parameter structure in the lower 14 bits of the + * upper 16 bits. + * Encoding the size of the parameter structure in the ioctl request + * is useful for catching programs compiled with old versions + * and to avoid overwriting user space outside the user buffer area. + * The highest 2 bits are reserved for indicating the ``access mode''. + * NOTE: This limits the max parameter size to 16kB -1 ! + */ + +/* + * Direction bits. + */ +#define _IOC_NONE 0U +#define _IOC_WRITE 2U +#define _IOC_READ 1U + +#include + +#endif /* _ASM_PARISC_IOCTL_H */ diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h new file mode 100644 index 0000000..054ec06 --- /dev/null +++ b/arch/parisc/include/uapi/asm/ioctls.h @@ -0,0 +1,92 @@ +#ifndef __ARCH_PARISC_IOCTLS_H__ +#define __ARCH_PARISC_IOCTLS_H__ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS _IOR('T', 16, struct termios) /* TCGETATTR */ +#define TCSETS _IOW('T', 17, struct termios) /* TCSETATTR */ +#define TCSETSW _IOW('T', 18, struct termios) /* TCSETATTRD */ +#define TCSETSF _IOW('T', 19, struct termios) /* TCSETATTRF */ +#define TCGETA _IOR('T', 1, struct termio) +#define TCSETA _IOW('T', 2, struct termio) +#define TCSETAW _IOW('T', 3, struct termio) +#define TCSETAF _IOW('T', 4, struct termio) +#define TCSBRK _IO('T', 5) +#define TCXONC _IO('T', 6) +#define TCFLSH _IO('T', 7) +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP _IOR('T', 30, int) +#define TIOCSPGRP _IOW('T', 29, int) +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID _IOR('T', 20, int) /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x5460 /* Get exact space used by quota */ + +#define TIOCSTART 0x5461 +#define TIOCSTOP 0x5462 +#define TIOCSLTC 0x5462 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* _ASM_PARISC_IOCTLS_H */ diff --git a/arch/parisc/include/uapi/asm/ipcbuf.h b/arch/parisc/include/uapi/asm/ipcbuf.h new file mode 100644 index 0000000..bd956c4 --- /dev/null +++ b/arch/parisc/include/uapi/asm/ipcbuf.h @@ -0,0 +1,27 @@ +#ifndef __PARISC_IPCBUF_H__ +#define __PARISC_IPCBUF_H__ + +/* + * The ipc64_perm structure for PA-RISC is almost identical to + * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel. + * 'seq' has been changed from long to int so that it's the same size + * on 64-bit kernels as on 32-bit ones. + */ + +struct ipc64_perm +{ + key_t key; + uid_t uid; + gid_t gid; + uid_t cuid; + gid_t cgid; + unsigned short int __pad1; + mode_t mode; + unsigned short int __pad2; + unsigned short int seq; + unsigned int __pad3; + unsigned long long int __unused1; + unsigned long long int __unused2; +}; + +#endif /* __PARISC_IPCBUF_H__ */ diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h new file mode 100644 index 0000000..12219eb --- /dev/null +++ b/arch/parisc/include/uapi/asm/mman.h @@ -0,0 +1,73 @@ +#ifndef __PARISC_MMAN_H__ +#define __PARISC_MMAN_H__ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x03 /* Mask for type of mapping */ +#define MAP_FIXED 0x04 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x10 /* don't use a file */ + +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_GROWSDOWN 0x8000 /* stack-like segment */ +#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x20000 /* do not block on IO */ +#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ +#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ + +#define MS_SYNC 1 /* synchronous memory sync */ +#define MS_ASYNC 2 /* sync memory asynchronously */ +#define MS_INVALIDATE 4 /* invalidate the caches */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0 /* no further special treatment */ +#define MADV_RANDOM 1 /* expect random page references */ +#define MADV_SEQUENTIAL 2 /* expect sequential page references */ +#define MADV_WILLNEED 3 /* will need these pages */ +#define MADV_DONTNEED 4 /* don't need these pages */ +#define MADV_SPACEAVAIL 5 /* insure that resources are reserved */ +#define MADV_VPS_PURGE 6 /* Purge pages from VM page cache */ +#define MADV_VPS_INHERIT 7 /* Inherit parents page size */ + +/* common/generic parameters */ +#define MADV_REMOVE 9 /* remove these pages & resources */ +#define MADV_DONTFORK 10 /* don't inherit across fork */ +#define MADV_DOFORK 11 /* do inherit across fork */ + +/* The range 12-64 is reserved for page size specification. */ +#define MADV_4K_PAGES 12 /* Use 4K pages */ +#define MADV_16K_PAGES 14 /* Use 16K pages */ +#define MADV_64K_PAGES 16 /* Use 64K pages */ +#define MADV_256K_PAGES 18 /* Use 256K pages */ +#define MADV_1M_PAGES 20 /* Use 1 Megabyte pages */ +#define MADV_4M_PAGES 22 /* Use 4 Megabyte pages */ +#define MADV_16M_PAGES 24 /* Use 16 Megabyte pages */ +#define MADV_64M_PAGES 26 /* Use 64 Megabyte pages */ + +#define MADV_MERGEABLE 65 /* KSM may merge identical pages */ +#define MADV_UNMERGEABLE 66 /* KSM may not merge identical pages */ + +#define MADV_HUGEPAGE 67 /* Worth backing with hugepages */ +#define MADV_NOHUGEPAGE 68 /* Not worth backing with hugepages */ + +#define MADV_DONTDUMP 69 /* Explicity exclude from the core dump, + overrides the coredump filter bits */ +#define MADV_DODUMP 70 /* Clear the MADV_NODUMP flag */ + +/* compatibility flags */ +#define MAP_FILE 0 +#define MAP_VARIABLE 0 + +#endif /* __PARISC_MMAN_H__ */ diff --git a/arch/parisc/include/uapi/asm/msgbuf.h b/arch/parisc/include/uapi/asm/msgbuf.h new file mode 100644 index 0000000..fe88f26 --- /dev/null +++ b/arch/parisc/include/uapi/asm/msgbuf.h @@ -0,0 +1,37 @@ +#ifndef _PARISC_MSGBUF_H +#define _PARISC_MSGBUF_H + +/* + * The msqid64_ds structure for parisc architecture, copied from sparc. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#ifndef CONFIG_64BIT + unsigned int __pad1; +#endif + __kernel_time_t msg_stime; /* last msgsnd time */ +#ifndef CONFIG_64BIT + unsigned int __pad2; +#endif + __kernel_time_t msg_rtime; /* last msgrcv time */ +#ifndef CONFIG_64BIT + unsigned int __pad3; +#endif + __kernel_time_t msg_ctime; /* last change time */ + unsigned int msg_cbytes; /* current number of bytes on queue */ + unsigned int msg_qnum; /* number of messages in queue */ + unsigned int msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned int __unused1; + unsigned int __unused2; +}; + +#endif /* _PARISC_MSGBUF_H */ diff --git a/arch/parisc/include/uapi/asm/pdc.h b/arch/parisc/include/uapi/asm/pdc.h new file mode 100644 index 0000000..702498f --- /dev/null +++ b/arch/parisc/include/uapi/asm/pdc.h @@ -0,0 +1,427 @@ +#ifndef _UAPI_PARISC_PDC_H +#define _UAPI_PARISC_PDC_H + +/* + * PDC return values ... + * All PDC calls return a subset of these errors. + */ + +#define PDC_WARN 3 /* Call completed with a warning */ +#define PDC_REQ_ERR_1 2 /* See above */ +#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */ +#define PDC_OK 0 /* Call completed successfully */ +#define PDC_BAD_PROC -1 /* Called non-existent procedure*/ +#define PDC_BAD_OPTION -2 /* Called with non-existent option */ +#define PDC_ERROR -3 /* Call could not complete without an error */ +#define PDC_NE_MOD -5 /* Module not found */ +#define PDC_NE_CELL_MOD -7 /* Cell module not found */ +#define PDC_INVALID_ARG -10 /* Called with an invalid argument */ +#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */ +#define PDC_NOT_NARROW -17 /* Narrow mode not supported */ + +/* + * PDC entry points... + */ + +#define PDC_POW_FAIL 1 /* perform a power-fail */ +#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */ + +#define PDC_CHASSIS 2 /* PDC-chassis functions */ +#define PDC_CHASSIS_DISP 0 /* update chassis display */ +#define PDC_CHASSIS_WARN 1 /* return chassis warnings */ +#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */ +#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */ + +#define PDC_PIM 3 /* Get PIM data */ +#define PDC_PIM_HPMC 0 /* Transfer HPMC data */ +#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/ +#define PDC_PIM_LPMC 2 /* Transfer HPMC data */ +#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */ +#define PDC_PIM_TOC 4 /* Transfer TOC data */ + +#define PDC_MODEL 4 /* PDC model information call */ +#define PDC_MODEL_INFO 0 /* returns information */ +#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */ +#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/ +#define PDC_MODEL_SYSMODEL 3 /* return system model info */ +#define PDC_MODEL_ENSPEC 4 /* enable specific option */ +#define PDC_MODEL_DISPEC 5 /* disable specific option */ +#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */ +#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */ +/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */ +#define PDC_MODEL_OS64 (1 << 0) +#define PDC_MODEL_OS32 (1 << 1) +#define PDC_MODEL_IOPDIR_FDC (1 << 2) +#define PDC_MODEL_NVA_MASK (3 << 4) +#define PDC_MODEL_NVA_SUPPORTED (0 << 4) +#define PDC_MODEL_NVA_SLOW (1 << 4) +#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4) +#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */ +#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */ + +#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */ +#define PA90_INSTRUCTION_SET 0x8 + +#define PDC_CACHE 5 /* return/set cache (& TLB) info*/ +#define PDC_CACHE_INFO 0 /* returns information */ +#define PDC_CACHE_SET_COH 1 /* set coherence state */ +#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */ + +#define PDC_HPA 6 /* return HPA of processor */ +#define PDC_HPA_PROCESSOR 0 +#define PDC_HPA_MODULES 1 + +#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */ +#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */ + +#define PDC_IODC 8 /* talk to IODC */ +#define PDC_IODC_READ 0 /* read IODC entry point */ +/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */ +#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */ +/* 1, 2 obsolete - HVERSION dependent*/ +#define PDC_IODC_RI_INIT 3 /* Initialize module */ +#define PDC_IODC_RI_IO 4 /* Module input/output */ +#define PDC_IODC_RI_SPA 5 /* Module input/output */ +#define PDC_IODC_RI_CONFIG 6 /* Module input/output */ +/* 7 obsolete - HVERSION dependent */ +#define PDC_IODC_RI_TEST 8 /* Module input/output */ +#define PDC_IODC_RI_TLB 9 /* Module input/output */ +#define PDC_IODC_NINIT 2 /* non-destructive init */ +#define PDC_IODC_DINIT 3 /* destructive init */ +#define PDC_IODC_MEMERR 4 /* check for memory errors */ +#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */ +#define PDC_IODC_BUS_ERROR -4 /* bus error return value */ +#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */ +#define PDC_IODC_COUNT -6 /* count is too small */ + +#define PDC_TOD 9 /* time-of-day clock (TOD) */ +#define PDC_TOD_READ 0 /* read TOD */ +#define PDC_TOD_WRITE 1 /* write TOD */ + + +#define PDC_STABLE 10 /* stable storage (sprockets) */ +#define PDC_STABLE_READ 0 +#define PDC_STABLE_WRITE 1 +#define PDC_STABLE_RETURN_SIZE 2 +#define PDC_STABLE_VERIFY_CONTENTS 3 +#define PDC_STABLE_INITIALIZE 4 + +#define PDC_NVOLATILE 11 /* often not implemented */ + +#define PDC_ADD_VALID 12 /* Memory validation PDC call */ +#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */ + +#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */ + +#define PDC_PROC 16 /* (sprockets) */ + +#define PDC_CONFIG 16 /* (sprockets) */ +#define PDC_CONFIG_DECONFIG 0 +#define PDC_CONFIG_DRECONFIG 1 +#define PDC_CONFIG_DRETURN_CONFIG 2 + +#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */ +#define PDC_BTLB_INFO 0 /* returns parameter */ +#define PDC_BTLB_INSERT 1 /* insert BTLB entry */ +#define PDC_BTLB_PURGE 2 /* purge BTLB entries */ +#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */ + +#define PDC_TLB 19 /* manage hardware TLB miss handling */ +#define PDC_TLB_INFO 0 /* returns parameter */ +#define PDC_TLB_SETUP 1 /* set up miss handling */ + +#define PDC_MEM 20 /* Manage memory */ +#define PDC_MEM_MEMINFO 0 +#define PDC_MEM_ADD_PAGE 1 +#define PDC_MEM_CLEAR_PDT 2 +#define PDC_MEM_READ_PDT 3 +#define PDC_MEM_RESET_CLEAR 4 +#define PDC_MEM_GOODMEM 5 +#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */ +#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE +#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131 +#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132 +#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133 + +#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */ +#define PDC_MEM_RET_DUPLICATE_ENTRY 4 +#define PDC_MEM_RET_BUF_SIZE_SMALL 1 +#define PDC_MEM_RET_PDT_FULL -11 +#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL + +#define PDC_PSW 21 /* Get/Set default System Mask */ +#define PDC_PSW_MASK 0 /* Return mask */ +#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */ +#define PDC_PSW_SET_DEFAULTS 2 /* Set default */ +#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */ +#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */ + +#define PDC_SYSTEM_MAP 22 /* find system modules */ +#define PDC_FIND_MODULE 0 +#define PDC_FIND_ADDRESS 1 +#define PDC_TRANSLATE_PATH 2 + +#define PDC_SOFT_POWER 23 /* soft power switch */ +#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */ +#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */ + + +/* HVERSION dependent */ + +/* The PDC_MEM_MAP calls */ +#define PDC_MEM_MAP 128 /* on s700: return page info */ +#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */ + +#define PDC_EEPROM 129 /* EEPROM access */ +#define PDC_EEPROM_READ_WORD 0 +#define PDC_EEPROM_WRITE_WORD 1 +#define PDC_EEPROM_READ_BYTE 2 +#define PDC_EEPROM_WRITE_BYTE 3 +#define PDC_EEPROM_EEPROM_PASSWORD -1000 + +#define PDC_NVM 130 /* NVM (non-volatile memory) access */ +#define PDC_NVM_READ_WORD 0 +#define PDC_NVM_WRITE_WORD 1 +#define PDC_NVM_READ_BYTE 2 +#define PDC_NVM_WRITE_BYTE 3 + +#define PDC_SEED_ERROR 132 /* (sprockets) */ + +#define PDC_IO 135 /* log error info, reset IO system */ +#define PDC_IO_READ_AND_CLEAR_ERRORS 0 +#define PDC_IO_RESET 1 +#define PDC_IO_RESET_DEVICES 2 +/* sets bits 6&7 (little endian) of the HcControl Register */ +#define PDC_IO_USB_SUSPEND 0xC000000000000000 +#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */ +#define PDC_IO_NO_SUSPEND -6 /* return value */ + +#define PDC_BROADCAST_RESET 136 /* reset all processors */ +#define PDC_DO_RESET 0 /* option: perform a broadcast reset */ +#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */ +#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */ +#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */ + +#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */ +#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */ + +#define PDC_LAN_STATION_ID_SIZE 6 + +#define PDC_CHECK_RANGES 139 /* (sprockets) */ + +#define PDC_NV_SECTIONS 141 /* (sprockets) */ + +#define PDC_PERFORMANCE 142 /* performance monitoring */ + +#define PDC_SYSTEM_INFO 143 /* system information */ +#define PDC_SYSINFO_RETURN_INFO_SIZE 0 +#define PDC_SYSINFO_RRETURN_SYS_INFO 1 +#define PDC_SYSINFO_RRETURN_ERRORS 2 +#define PDC_SYSINFO_RRETURN_WARNINGS 3 +#define PDC_SYSINFO_RETURN_REVISIONS 4 +#define PDC_SYSINFO_RRETURN_DIAGNOSE 5 +#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005 + +#define PDC_RDR 144 /* (sprockets) */ +#define PDC_RDR_READ_BUFFER 0 +#define PDC_RDR_READ_SINGLE 1 +#define PDC_RDR_WRITE_SINGLE 2 + +#define PDC_INTRIGUE 145 /* (sprockets) */ +#define PDC_INTRIGUE_WRITE_BUFFER 0 +#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1 +#define PDC_INTRIGUE_START_CPU_COUNTERS 2 +#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3 + +#define PDC_STI 146 /* STI access */ +/* same as PDC_PCI_XXX values (see below) */ + +/* Legacy PDC definitions for same stuff */ +#define PDC_PCI_INDEX 147 +#define PDC_PCI_INTERFACE_INFO 0 +#define PDC_PCI_SLOT_INFO 1 +#define PDC_PCI_INFLIGHT_BYTES 2 +#define PDC_PCI_READ_CONFIG 3 +#define PDC_PCI_WRITE_CONFIG 4 +#define PDC_PCI_READ_PCI_IO 5 +#define PDC_PCI_WRITE_PCI_IO 6 +#define PDC_PCI_READ_CONFIG_DELAY 7 +#define PDC_PCI_UPDATE_CONFIG_DELAY 8 +#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9 +#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10 +#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11 +#define PDC_PCI_PCI_RESERVED 12 +#define PDC_PCI_PCI_INT_ROUTE_SIZE 13 +#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE +#define PDC_PCI_PCI_INT_ROUTE 14 +#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE +#define PDC_PCI_READ_MON_TYPE 15 +#define PDC_PCI_WRITE_MON_TYPE 16 + + +/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */ +#define PDC_INITIATOR 163 +#define PDC_GET_INITIATOR 0 +#define PDC_SET_INITIATOR 1 +#define PDC_DELETE_INITIATOR 2 +#define PDC_RETURN_TABLE_SIZE 3 +#define PDC_RETURN_TABLE 4 + +#define PDC_LINK 165 /* (sprockets) */ +#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */ +#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */ + +/* cl_class + * page 3-33 of IO-Firmware ARS + * IODC ENTRY_INIT(Search first) RET[1] + */ +#define CL_NULL 0 /* invalid */ +#define CL_RANDOM 1 /* random access (as disk) */ +#define CL_SEQU 2 /* sequential access (as tape) */ +#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */ +#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */ +#define CL_DISPL 9 /* half-duplex console (display) */ +#define CL_FC 10 /* FiberChannel access media */ + +/* IODC ENTRY_INIT() */ +#define ENTRY_INIT_SRCH_FRST 2 +#define ENTRY_INIT_SRCH_NEXT 3 +#define ENTRY_INIT_MOD_DEV 4 +#define ENTRY_INIT_DEV 5 +#define ENTRY_INIT_MOD 6 +#define ENTRY_INIT_MSG 9 + +/* IODC ENTRY_IO() */ +#define ENTRY_IO_BOOTIN 0 +#define ENTRY_IO_BOOTOUT 1 +#define ENTRY_IO_CIN 2 +#define ENTRY_IO_COUT 3 +#define ENTRY_IO_CLOSE 4 +#define ENTRY_IO_GETMSG 9 +#define ENTRY_IO_BBLOCK_IN 16 +#define ENTRY_IO_BBLOCK_OUT 17 + +/* IODC ENTRY_SPA() */ + +/* IODC ENTRY_CONFIG() */ + +/* IODC ENTRY_TEST() */ + +/* IODC ENTRY_TLB() */ + +/* constants for OS (NVM...) */ +#define OS_ID_NONE 0 /* Undefined OS ID */ +#define OS_ID_HPUX 1 /* HP-UX OS */ +#define OS_ID_MPEXL 2 /* MPE XL OS */ +#define OS_ID_OSF 3 /* OSF OS */ +#define OS_ID_HPRT 4 /* HP-RT OS */ +#define OS_ID_NOVEL 5 /* NOVELL OS */ +#define OS_ID_LINUX 6 /* Linux */ + + +/* constants for PDC_CHASSIS */ +#define OSTAT_OFF 0 +#define OSTAT_FLT 1 +#define OSTAT_TEST 2 +#define OSTAT_INIT 3 +#define OSTAT_SHUT 4 +#define OSTAT_WARN 5 +#define OSTAT_RUN 6 +#define OSTAT_ON 7 + +/* Page Zero constant offsets used by the HPMC handler */ +#define BOOT_CONSOLE_HPA_OFFSET 0x3c0 +#define BOOT_CONSOLE_SPA_OFFSET 0x3c4 +#define BOOT_CONSOLE_PATH_OFFSET 0x3a8 + +/* size of the pdc_result buffer for firmware.c */ +#define NUM_PDC_RESULT 32 + +#if !defined(__ASSEMBLY__) + +#include + + +/* flags of the device_path */ +#define PF_AUTOBOOT 0x80 +#define PF_AUTOSEARCH 0x40 +#define PF_TIMER 0x0F + +struct device_path { /* page 1-69 */ + unsigned char flags; /* flags see above! */ + unsigned char bc[6]; /* bus converter routing info */ + unsigned char mod; + unsigned int layers[6];/* device-specific layer-info */ +} __attribute__((aligned(8))) ; + +struct pz_device { + struct device_path dp; /* see above */ + /* struct iomod *hpa; */ + unsigned int hpa; /* HPA base address */ + /* char *spa; */ + unsigned int spa; /* SPA base address */ + /* int (*iodc_io)(struct iomod*, ...); */ + unsigned int iodc_io; /* device entry point */ + short pad; /* reserved */ + unsigned short cl_class;/* see below */ +} __attribute__((aligned(8))) ; + +struct zeropage { + /* [0x000] initialize vectors (VEC) */ + unsigned int vec_special; /* must be zero */ + /* int (*vec_pow_fail)(void);*/ + unsigned int vec_pow_fail; /* power failure handler */ + /* int (*vec_toc)(void); */ + unsigned int vec_toc; + unsigned int vec_toclen; + /* int (*vec_rendz)(void); */ + unsigned int vec_rendz; + int vec_pow_fail_flen; + int vec_pad[10]; + + /* [0x040] reserved processor dependent */ + int pad0[112]; + + /* [0x200] reserved */ + int pad1[84]; + + /* [0x350] memory configuration (MC) */ + int memc_cont; /* contiguous mem size (bytes) */ + int memc_phsize; /* physical memory size */ + int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */ + unsigned int mem_pdc_hi; /* used for 64-bit */ + + /* [0x360] various parameters for the boot-CPU */ + /* unsigned int *mem_booterr[8]; */ + unsigned int mem_booterr[8]; /* ptr to boot errors */ + unsigned int mem_free; /* first location, where OS can be loaded */ + /* struct iomod *mem_hpa; */ + unsigned int mem_hpa; /* HPA of the boot-CPU */ + /* int (*mem_pdc)(int, ...); */ + unsigned int mem_pdc; /* PDC entry point */ + unsigned int mem_10msec; /* number of clock ticks in 10msec */ + + /* [0x390] initial memory module (IMM) */ + /* struct iomod *imm_hpa; */ + unsigned int imm_hpa; /* HPA of the IMM */ + int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */ + unsigned int imm_spa_size; /* SPA size of the IMM in bytes */ + unsigned int imm_max_mem; /* bytes of mem in IMM */ + + /* [0x3A0] boot console, display device and keyboard */ + struct pz_device mem_cons; /* description of console device */ + struct pz_device mem_boot; /* description of boot device */ + struct pz_device mem_kbd; /* description of keyboard device */ + + /* [0x430] reserved */ + int pad430[116]; + + /* [0x600] processor dependent */ + __u32 pad600[1]; + __u32 proc_sti; /* pointer to STI ROM */ + __u32 pad608[126]; +}; + +#endif /* !defined(__ASSEMBLY__) */ + +#endif /* _UAPI_PARISC_PDC_H */ diff --git a/arch/parisc/include/uapi/asm/posix_types.h b/arch/parisc/include/uapi/asm/posix_types.h new file mode 100644 index 0000000..b934425 --- /dev/null +++ b/arch/parisc/include/uapi/asm/posix_types.h @@ -0,0 +1,24 @@ +#ifndef __ARCH_PARISC_POSIX_TYPES_H +#define __ARCH_PARISC_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t + +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + +typedef int __kernel_suseconds_t; +#define __kernel_suseconds_t __kernel_suseconds_t + +typedef long long __kernel_off64_t; +typedef unsigned long long __kernel_ino64_t; + +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/ptrace.h b/arch/parisc/include/uapi/asm/ptrace.h new file mode 100644 index 0000000..c4fa6c8 --- /dev/null +++ b/arch/parisc/include/uapi/asm/ptrace.h @@ -0,0 +1,47 @@ +/* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg +** Copyright (C) 2000 Grant Grundler, Hewlett-Packard +*/ +#ifndef _UAPI_PARISC_PTRACE_H +#define _UAPI_PARISC_PTRACE_H + + +#include + +/* This struct defines the way the registers are stored on the + * stack during a system call. + * + * N.B. gdb/strace care about the size and offsets within this + * structure. If you change things, you may break object compatibility + * for those applications. + */ + +struct pt_regs { + unsigned long gr[32]; /* PSW is in gr[0] */ + __u64 fr[32]; + unsigned long sr[ 8]; + unsigned long iasq[2]; + unsigned long iaoq[2]; + unsigned long cr27; + unsigned long pad0; /* available for other uses */ + unsigned long orig_r28; + unsigned long ksp; + unsigned long kpc; + unsigned long sar; /* CR11 */ + unsigned long iir; /* CR19 */ + unsigned long isr; /* CR20 */ + unsigned long ior; /* CR21 */ + unsigned long ipsw; /* CR22 */ +}; + +/* + * The numbers chosen here are somewhat arbitrary but absolutely MUST + * not overlap with any of the number assigned in . + * + * These ones are taken from IA-64 on the assumption that theirs are + * the most correct (and we also want to support PTRACE_SINGLEBLOCK + * since we have taken branch traps too) + */ +#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */ + + +#endif /* _UAPI_PARISC_PTRACE_H */ diff --git a/arch/parisc/include/uapi/asm/resource.h b/arch/parisc/include/uapi/asm/resource.h new file mode 100644 index 0000000..8b06343 --- /dev/null +++ b/arch/parisc/include/uapi/asm/resource.h @@ -0,0 +1,7 @@ +#ifndef _ASM_PARISC_RESOURCE_H +#define _ASM_PARISC_RESOURCE_H + +#define _STK_LIM_MAX 10 * _STK_LIM +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/sembuf.h b/arch/parisc/include/uapi/asm/sembuf.h new file mode 100644 index 0000000..1e59ffd --- /dev/null +++ b/arch/parisc/include/uapi/asm/sembuf.h @@ -0,0 +1,29 @@ +#ifndef _PARISC_SEMBUF_H +#define _PARISC_SEMBUF_H + +/* + * The semid64_ds structure for parisc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ +#ifndef CONFIG_64BIT + unsigned int __pad1; +#endif + __kernel_time_t sem_otime; /* last semop time */ +#ifndef CONFIG_64BIT + unsigned int __pad2; +#endif + __kernel_time_t sem_ctime; /* last change time */ + unsigned int sem_nsems; /* no. of semaphores in array */ + unsigned int __unused1; + unsigned int __unused2; +}; + +#endif /* _PARISC_SEMBUF_H */ diff --git a/arch/parisc/include/uapi/asm/setup.h b/arch/parisc/include/uapi/asm/setup.h new file mode 100644 index 0000000..7da2e5b --- /dev/null +++ b/arch/parisc/include/uapi/asm/setup.h @@ -0,0 +1,6 @@ +#ifndef _PARISC_SETUP_H +#define _PARISC_SETUP_H + +#define COMMAND_LINE_SIZE 1024 + +#endif /* _PARISC_SETUP_H */ diff --git a/arch/parisc/include/uapi/asm/shmbuf.h b/arch/parisc/include/uapi/asm/shmbuf.h new file mode 100644 index 0000000..0a3eada --- /dev/null +++ b/arch/parisc/include/uapi/asm/shmbuf.h @@ -0,0 +1,58 @@ +#ifndef _PARISC_SHMBUF_H +#define _PARISC_SHMBUF_H + +/* + * The shmid64_ds structure for parisc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ +#ifndef CONFIG_64BIT + unsigned int __pad1; +#endif + __kernel_time_t shm_atime; /* last attach time */ +#ifndef CONFIG_64BIT + unsigned int __pad2; +#endif + __kernel_time_t shm_dtime; /* last detach time */ +#ifndef CONFIG_64BIT + unsigned int __pad3; +#endif + __kernel_time_t shm_ctime; /* last change time */ +#ifndef CONFIG_64BIT + unsigned int __pad4; +#endif + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned int shm_nattch; /* no. of current attaches */ + unsigned int __unused1; + unsigned int __unused2; +}; + +#ifdef CONFIG_64BIT +/* The 'unsigned int' (formerly 'unsigned long') data types below will + * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on + * a wide kernel, but if some of these values are meant to contain pointers + * they may need to be 'long long' instead. -PB XXX FIXME + */ +#endif +struct shminfo64 { + unsigned int shmmax; + unsigned int shmmin; + unsigned int shmmni; + unsigned int shmseg; + unsigned int shmall; + unsigned int __unused1; + unsigned int __unused2; + unsigned int __unused3; + unsigned int __unused4; +}; + +#endif /* _PARISC_SHMBUF_H */ diff --git a/arch/parisc/include/uapi/asm/sigcontext.h b/arch/parisc/include/uapi/asm/sigcontext.h new file mode 100644 index 0000000..27ef31b --- /dev/null +++ b/arch/parisc/include/uapi/asm/sigcontext.h @@ -0,0 +1,20 @@ +#ifndef _ASMPARISC_SIGCONTEXT_H +#define _ASMPARISC_SIGCONTEXT_H + +#define PARISC_SC_FLAG_ONSTACK 1<<0 +#define PARISC_SC_FLAG_IN_SYSCALL 1<<1 + +/* We will add more stuff here as it becomes necessary, until we know + it works. */ +struct sigcontext { + unsigned long sc_flags; + + unsigned long sc_gr[32]; /* PSW in sc_gr[0] */ + unsigned long long sc_fr[32]; /* FIXME, do we need other state info? */ + unsigned long sc_iasq[2]; + unsigned long sc_iaoq[2]; + unsigned long sc_sar; /* cr11 */ +}; + + +#endif diff --git a/arch/parisc/include/uapi/asm/siginfo.h b/arch/parisc/include/uapi/asm/siginfo.h new file mode 100644 index 0000000..d703472 --- /dev/null +++ b/arch/parisc/include/uapi/asm/siginfo.h @@ -0,0 +1,9 @@ +#ifndef _PARISC_SIGINFO_H +#define _PARISC_SIGINFO_H + +#include + +#undef NSIGTRAP +#define NSIGTRAP 4 + +#endif diff --git a/arch/parisc/include/uapi/asm/signal.h b/arch/parisc/include/uapi/asm/signal.h new file mode 100644 index 0000000..b1ddaa2 --- /dev/null +++ b/arch/parisc/include/uapi/asm/signal.h @@ -0,0 +1,118 @@ +#ifndef _UAPI_ASM_PARISC_SIGNAL_H +#define _UAPI_ASM_PARISC_SIGNAL_H + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGEMT 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGBUS 10 +#define SIGSEGV 11 +#define SIGSYS 12 /* Linux doesn't use this */ +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGUSR1 16 +#define SIGUSR2 17 +#define SIGCHLD 18 +#define SIGPWR 19 +#define SIGVTALRM 20 +#define SIGPROF 21 +#define SIGIO 22 +#define SIGPOLL SIGIO +#define SIGWINCH 23 +#define SIGSTOP 24 +#define SIGTSTP 25 +#define SIGCONT 26 +#define SIGTTIN 27 +#define SIGTTOU 28 +#define SIGURG 29 +#define SIGLOST 30 /* Linux doesn't use this either */ +#define SIGUNUSED 31 +#define SIGRESERVE SIGUNUSED + +#define SIGXCPU 33 +#define SIGXFSZ 34 +#define SIGSTKFLT 36 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 37 +#define SIGRTMAX _NSIG /* it's 44 under HP/UX */ + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_ONSTACK 0x00000001 +#define SA_RESETHAND 0x00000004 +#define SA_NOCLDSTOP 0x00000008 +#define SA_SIGINFO 0x00000010 +#define SA_NODEFER 0x00000020 +#define SA_RESTART 0x00000040 +#define SA_NOCLDWAIT 0x00000080 +#define _SA_SIGGFAULT 0x00000100 /* HPUX */ + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 /* obsolete -- ignored */ + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +# ifndef __ASSEMBLY__ + +# include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +/* Type of a signal handler. */ +#ifdef CONFIG_64BIT +/* function pointers on 64-bit parisc are pointers to little structs and the + * compiler doesn't support code which changes or tests the address of + * the function in the little struct. This is really ugly -PB + */ +typedef char __user *__sighandler_t; +#else +typedef void __signalfn_t(int); +typedef __signalfn_t __user *__sighandler_t; +#endif + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#endif /* !__ASSEMBLY */ +#endif /* _UAPI_ASM_PARISC_SIGNAL_H */ diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h new file mode 100644 index 0000000..1b52c2c --- /dev/null +++ b/arch/parisc/include/uapi/asm/socket.h @@ -0,0 +1,77 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 0xffff + +#define SO_DEBUG 0x0001 +#define SO_REUSEADDR 0x0004 +#define SO_KEEPALIVE 0x0008 +#define SO_DONTROUTE 0x0010 +#define SO_BROADCAST 0x0020 +#define SO_LINGER 0x0080 +#define SO_OOBINLINE 0x0100 +/* To add :#define SO_REUSEPORT 0x0200 */ +#define SO_SNDBUF 0x1001 +#define SO_RCVBUF 0x1002 +#define SO_SNDBUFFORCE 0x100a +#define SO_RCVBUFFORCE 0x100b +#define SO_SNDLOWAT 0x1003 +#define SO_RCVLOWAT 0x1004 +#define SO_SNDTIMEO 0x1005 +#define SO_RCVTIMEO 0x1006 +#define SO_ERROR 0x1007 +#define SO_TYPE 0x1008 +#define SO_PROTOCOL 0x1028 +#define SO_DOMAIN 0x1029 +#define SO_PEERNAME 0x2000 + +#define SO_NO_CHECK 0x400b +#define SO_PRIORITY 0x400c +#define SO_BSDCOMPAT 0x400e +#define SO_PASSCRED 0x4010 +#define SO_PEERCRED 0x4011 +#define SO_TIMESTAMP 0x4012 +#define SCM_TIMESTAMP SO_TIMESTAMP +#define SO_TIMESTAMPNS 0x4013 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 0x4016 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x4017 +#define SO_SECURITY_ENCRYPTION_NETWORK 0x4018 + +#define SO_BINDTODEVICE 0x4019 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 0x401a +#define SO_DETACH_FILTER 0x401b + +#define SO_ACCEPTCONN 0x401c + +#define SO_PEERSEC 0x401d +#define SO_PASSSEC 0x401e + +#define SO_MARK 0x401f + +#define SO_TIMESTAMPING 0x4020 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#define SO_RXQ_OVFL 0x4021 + +#define SO_WIFI_STATUS 0x4022 +#define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 0x4023 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 0x4024 + + +/* O_NONBLOCK clashes with the bits used for socket types. Therefore we + * have to define SOCK_NONBLOCK to a different value here. + */ +#define SOCK_NONBLOCK 0x40000000 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/parisc/include/uapi/asm/sockios.h b/arch/parisc/include/uapi/asm/sockios.h new file mode 100644 index 0000000..dabfbc7 --- /dev/null +++ b/arch/parisc/include/uapi/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_PARISC_SOCKIOS__ +#define __ARCH_PARISC_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif diff --git a/arch/parisc/include/uapi/asm/stat.h b/arch/parisc/include/uapi/asm/stat.h new file mode 100644 index 0000000..d76fbda --- /dev/null +++ b/arch/parisc/include/uapi/asm/stat.h @@ -0,0 +1,100 @@ +#ifndef _PARISC_STAT_H +#define _PARISC_STAT_H + +#include + +struct stat { + unsigned int st_dev; /* dev_t is 32 bits on parisc */ + ino_t st_ino; /* 32 bits */ + mode_t st_mode; /* 16 bits */ + unsigned short st_nlink; /* 16 bits */ + unsigned short st_reserved1; /* old st_uid */ + unsigned short st_reserved2; /* old st_gid */ + unsigned int st_rdev; + off_t st_size; + time_t st_atime; + unsigned int st_atime_nsec; + time_t st_mtime; + unsigned int st_mtime_nsec; + time_t st_ctime; + unsigned int st_ctime_nsec; + int st_blksize; + int st_blocks; + unsigned int __unused1; /* ACL stuff */ + unsigned int __unused2; /* network */ + ino_t __unused3; /* network */ + unsigned int __unused4; /* cnodes */ + unsigned short __unused5; /* netsite */ + short st_fstype; + unsigned int st_realdev; + unsigned short st_basemode; + unsigned short st_spareshort; + uid_t st_uid; + gid_t st_gid; + unsigned int st_spare4[3]; +}; + +#define STAT_HAVE_NSEC + +typedef __kernel_off64_t off64_t; + +struct hpux_stat64 { + unsigned int st_dev; /* dev_t is 32 bits on parisc */ + ino_t st_ino; /* 32 bits */ + mode_t st_mode; /* 16 bits */ + unsigned short st_nlink; /* 16 bits */ + unsigned short st_reserved1; /* old st_uid */ + unsigned short st_reserved2; /* old st_gid */ + unsigned int st_rdev; + off64_t st_size; + time_t st_atime; + unsigned int st_spare1; + time_t st_mtime; + unsigned int st_spare2; + time_t st_ctime; + unsigned int st_spare3; + int st_blksize; + __u64 st_blocks; + unsigned int __unused1; /* ACL stuff */ + unsigned int __unused2; /* network */ + ino_t __unused3; /* network */ + unsigned int __unused4; /* cnodes */ + unsigned short __unused5; /* netsite */ + short st_fstype; + unsigned int st_realdev; + unsigned short st_basemode; + unsigned short st_spareshort; + uid_t st_uid; + gid_t st_gid; + unsigned int st_spare4[3]; +}; + +/* This is the struct that 32-bit userspace applications are expecting. + * How 64-bit apps are going to be compiled, I have no idea. But at least + * this way, we don't have a wrapper in the kernel. + */ +struct stat64 { + unsigned long long st_dev; + unsigned int __pad1; + + unsigned int __st_ino; /* Not actually filled in */ + unsigned int st_mode; + unsigned int st_nlink; + unsigned int st_uid; + unsigned int st_gid; + unsigned long long st_rdev; + unsigned int __pad2; + signed long long st_size; + signed int st_blksize; + + signed long long st_blocks; + signed int st_atime; + unsigned int st_atime_nsec; + signed int st_mtime; + unsigned int st_mtime_nsec; + signed int st_ctime; + unsigned int st_ctime_nsec; + unsigned long long st_ino; +}; + +#endif diff --git a/arch/parisc/include/uapi/asm/statfs.h b/arch/parisc/include/uapi/asm/statfs.h new file mode 100644 index 0000000..324bea9 --- /dev/null +++ b/arch/parisc/include/uapi/asm/statfs.h @@ -0,0 +1,7 @@ +#ifndef _PARISC_STATFS_H +#define _PARISC_STATFS_H + +#define __statfs_word long +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/swab.h b/arch/parisc/include/uapi/asm/swab.h new file mode 100644 index 0000000..e78403b --- /dev/null +++ b/arch/parisc/include/uapi/asm/swab.h @@ -0,0 +1,66 @@ +#ifndef _PARISC_SWAB_H +#define _PARISC_SWAB_H + +#include +#include + +#define __SWAB_64_THRU_32__ + +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +{ + __asm__("dep %0, 15, 8, %0\n\t" /* deposit 00ab -> 0bab */ + "shd %%r0, %0, 8, %0" /* shift 000000ab -> 00ba */ + : "=r" (x) + : "0" (x)); + return x; +} +#define __arch_swab16 __arch_swab16 + +static inline __attribute_const__ __u32 __arch_swab24(__u32 x) +{ + __asm__("shd %0, %0, 8, %0\n\t" /* shift xabcxabc -> cxab */ + "dep %0, 15, 8, %0\n\t" /* deposit cxab -> cbab */ + "shd %%r0, %0, 8, %0" /* shift 0000cbab -> 0cba */ + : "=r" (x) + : "0" (x)); + return x; +} + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + unsigned int temp; + __asm__("shd %0, %0, 16, %1\n\t" /* shift abcdabcd -> cdab */ + "dep %1, 15, 8, %1\n\t" /* deposit cdab -> cbab */ + "shd %0, %1, 8, %0" /* shift abcdcbab -> dcba */ + : "=r" (x), "=&r" (temp) + : "0" (x)); + return x; +} +#define __arch_swab32 __arch_swab32 + +#if BITS_PER_LONG > 32 +/* +** From "PA-RISC 2.0 Architecture", HP Professional Books. +** See Appendix I page 8 , "Endian Byte Swapping". +** +** Pretty cool algorithm: (* == zero'd bits) +** PERMH 01234567 -> 67452301 into %0 +** HSHL 67452301 -> 7*5*3*1* into %1 +** HSHR 67452301 -> *6*4*2*0 into %0 +** OR %0 | %1 -> 76543210 into %0 (all done!) +*/ +static inline __attribute_const__ __u64 __arch_swab64(__u64 x) +{ + __u64 temp; + __asm__("permh,3210 %0, %0\n\t" + "hshl %0, 8, %1\n\t" + "hshr,u %0, 8, %0\n\t" + "or %1, %0, %0" + : "=r" (x), "=&r" (temp) + : "0" (x)); + return x; +} +#define __arch_swab64 __arch_swab64 +#endif /* BITS_PER_LONG > 32 */ + +#endif /* _PARISC_SWAB_H */ diff --git a/arch/parisc/include/uapi/asm/termbits.h b/arch/parisc/include/uapi/asm/termbits.h new file mode 100644 index 0000000..d1ab921 --- /dev/null +++ b/arch/parisc/include/uapi/asm/termbits.h @@ -0,0 +1,201 @@ +#ifndef __ARCH_PARISC_TERMBITS_H__ +#define __ARCH_PARISC_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0040000 +#define IUTF8 0100000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 +#define EXTPROC 0200000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif diff --git a/arch/parisc/include/uapi/asm/termios.h b/arch/parisc/include/uapi/asm/termios.h new file mode 100644 index 0000000..f337739 --- /dev/null +++ b/arch/parisc/include/uapi/asm/termios.h @@ -0,0 +1,43 @@ +#ifndef _UAPI_PARISC_TERMIOS_H +#define _UAPI_PARISC_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + + +#endif /* _UAPI_PARISC_TERMIOS_H */ diff --git a/arch/parisc/include/uapi/asm/types.h b/arch/parisc/include/uapi/asm/types.h new file mode 100644 index 0000000..8866f9b --- /dev/null +++ b/arch/parisc/include/uapi/asm/types.h @@ -0,0 +1,6 @@ +#ifndef _PARISC_TYPES_H +#define _PARISC_TYPES_H + +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/unistd.h b/arch/parisc/include/uapi/asm/unistd.h new file mode 100644 index 0000000..e178f30 --- /dev/null +++ b/arch/parisc/include/uapi/asm/unistd.h @@ -0,0 +1,837 @@ +#ifndef _UAPI_ASM_PARISC_UNISTD_H_ +#define _UAPI_ASM_PARISC_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +/* + * HP-UX system calls get their native numbers for binary compatibility. + */ + +#define __NR_HPUX_exit 1 +#define __NR_HPUX_fork 2 +#define __NR_HPUX_read 3 +#define __NR_HPUX_write 4 +#define __NR_HPUX_open 5 +#define __NR_HPUX_close 6 +#define __NR_HPUX_wait 7 +#define __NR_HPUX_creat 8 +#define __NR_HPUX_link 9 +#define __NR_HPUX_unlink 10 +#define __NR_HPUX_execv 11 +#define __NR_HPUX_chdir 12 +#define __NR_HPUX_time 13 +#define __NR_HPUX_mknod 14 +#define __NR_HPUX_chmod 15 +#define __NR_HPUX_chown 16 +#define __NR_HPUX_break 17 +#define __NR_HPUX_lchmod 18 +#define __NR_HPUX_lseek 19 +#define __NR_HPUX_getpid 20 +#define __NR_HPUX_mount 21 +#define __NR_HPUX_umount 22 +#define __NR_HPUX_setuid 23 +#define __NR_HPUX_getuid 24 +#define __NR_HPUX_stime 25 +#define __NR_HPUX_ptrace 26 +#define __NR_HPUX_alarm 27 +#define __NR_HPUX_oldfstat 28 +#define __NR_HPUX_pause 29 +#define __NR_HPUX_utime 30 +#define __NR_HPUX_stty 31 +#define __NR_HPUX_gtty 32 +#define __NR_HPUX_access 33 +#define __NR_HPUX_nice 34 +#define __NR_HPUX_ftime 35 +#define __NR_HPUX_sync 36 +#define __NR_HPUX_kill 37 +#define __NR_HPUX_stat 38 +#define __NR_HPUX_setpgrp3 39 +#define __NR_HPUX_lstat 40 +#define __NR_HPUX_dup 41 +#define __NR_HPUX_pipe 42 +#define __NR_HPUX_times 43 +#define __NR_HPUX_profil 44 +#define __NR_HPUX_ki_call 45 +#define __NR_HPUX_setgid 46 +#define __NR_HPUX_getgid 47 +#define __NR_HPUX_sigsys 48 +#define __NR_HPUX_reserved1 49 +#define __NR_HPUX_reserved2 50 +#define __NR_HPUX_acct 51 +#define __NR_HPUX_set_userthreadid 52 +#define __NR_HPUX_oldlock 53 +#define __NR_HPUX_ioctl 54 +#define __NR_HPUX_reboot 55 +#define __NR_HPUX_symlink 56 +#define __NR_HPUX_utssys 57 +#define __NR_HPUX_readlink 58 +#define __NR_HPUX_execve 59 +#define __NR_HPUX_umask 60 +#define __NR_HPUX_chroot 61 +#define __NR_HPUX_fcntl 62 +#define __NR_HPUX_ulimit 63 +#define __NR_HPUX_getpagesize 64 +#define __NR_HPUX_mremap 65 +#define __NR_HPUX_vfork 66 +#define __NR_HPUX_vread 67 +#define __NR_HPUX_vwrite 68 +#define __NR_HPUX_sbrk 69 +#define __NR_HPUX_sstk 70 +#define __NR_HPUX_mmap 71 +#define __NR_HPUX_vadvise 72 +#define __NR_HPUX_munmap 73 +#define __NR_HPUX_mprotect 74 +#define __NR_HPUX_madvise 75 +#define __NR_HPUX_vhangup 76 +#define __NR_HPUX_swapoff 77 +#define __NR_HPUX_mincore 78 +#define __NR_HPUX_getgroups 79 +#define __NR_HPUX_setgroups 80 +#define __NR_HPUX_getpgrp2 81 +#define __NR_HPUX_setpgrp2 82 +#define __NR_HPUX_setitimer 83 +#define __NR_HPUX_wait3 84 +#define __NR_HPUX_swapon 85 +#define __NR_HPUX_getitimer 86 +#define __NR_HPUX_gethostname42 87 +#define __NR_HPUX_sethostname42 88 +#define __NR_HPUX_getdtablesize 89 +#define __NR_HPUX_dup2 90 +#define __NR_HPUX_getdopt 91 +#define __NR_HPUX_fstat 92 +#define __NR_HPUX_select 93 +#define __NR_HPUX_setdopt 94 +#define __NR_HPUX_fsync 95 +#define __NR_HPUX_setpriority 96 +#define __NR_HPUX_socket_old 97 +#define __NR_HPUX_connect_old 98 +#define __NR_HPUX_accept_old 99 +#define __NR_HPUX_getpriority 100 +#define __NR_HPUX_send_old 101 +#define __NR_HPUX_recv_old 102 +#define __NR_HPUX_socketaddr_old 103 +#define __NR_HPUX_bind_old 104 +#define __NR_HPUX_setsockopt_old 105 +#define __NR_HPUX_listen_old 106 +#define __NR_HPUX_vtimes_old 107 +#define __NR_HPUX_sigvector 108 +#define __NR_HPUX_sigblock 109 +#define __NR_HPUX_siggetmask 110 +#define __NR_HPUX_sigpause 111 +#define __NR_HPUX_sigstack 112 +#define __NR_HPUX_recvmsg_old 113 +#define __NR_HPUX_sendmsg_old 114 +#define __NR_HPUX_vtrace_old 115 +#define __NR_HPUX_gettimeofday 116 +#define __NR_HPUX_getrusage 117 +#define __NR_HPUX_getsockopt_old 118 +#define __NR_HPUX_resuba_old 119 +#define __NR_HPUX_readv 120 +#define __NR_HPUX_writev 121 +#define __NR_HPUX_settimeofday 122 +#define __NR_HPUX_fchown 123 +#define __NR_HPUX_fchmod 124 +#define __NR_HPUX_recvfrom_old 125 +#define __NR_HPUX_setresuid 126 +#define __NR_HPUX_setresgid 127 +#define __NR_HPUX_rename 128 +#define __NR_HPUX_truncate 129 +#define __NR_HPUX_ftruncate 130 +#define __NR_HPUX_flock_old 131 +#define __NR_HPUX_sysconf 132 +#define __NR_HPUX_sendto_old 133 +#define __NR_HPUX_shutdown_old 134 +#define __NR_HPUX_socketpair_old 135 +#define __NR_HPUX_mkdir 136 +#define __NR_HPUX_rmdir 137 +#define __NR_HPUX_utimes_old 138 +#define __NR_HPUX_sigcleanup_old 139 +#define __NR_HPUX_setcore 140 +#define __NR_HPUX_getpeername_old 141 +#define __NR_HPUX_gethostid 142 +#define __NR_HPUX_sethostid 143 +#define __NR_HPUX_getrlimit 144 +#define __NR_HPUX_setrlimit 145 +#define __NR_HPUX_killpg_old 146 +#define __NR_HPUX_cachectl 147 +#define __NR_HPUX_quotactl 148 +#define __NR_HPUX_get_sysinfo 149 +#define __NR_HPUX_getsockname_old 150 +#define __NR_HPUX_privgrp 151 +#define __NR_HPUX_rtprio 152 +#define __NR_HPUX_plock 153 +#define __NR_HPUX_reserved3 154 +#define __NR_HPUX_lockf 155 +#define __NR_HPUX_semget 156 +#define __NR_HPUX_osemctl 157 +#define __NR_HPUX_semop 158 +#define __NR_HPUX_msgget 159 +#define __NR_HPUX_omsgctl 160 +#define __NR_HPUX_msgsnd 161 +#define __NR_HPUX_msgrecv 162 +#define __NR_HPUX_shmget 163 +#define __NR_HPUX_oshmctl 164 +#define __NR_HPUX_shmat 165 +#define __NR_HPUX_shmdt 166 +#define __NR_HPUX_m68020_advise 167 +/* [168,189] are for Discless/DUX */ +#define __NR_HPUX_csp 168 +#define __NR_HPUX_cluster 169 +#define __NR_HPUX_mkrnod 170 +#define __NR_HPUX_test 171 +#define __NR_HPUX_unsp_open 172 +#define __NR_HPUX_reserved4 173 +#define __NR_HPUX_getcontext_old 174 +#define __NR_HPUX_osetcontext 175 +#define __NR_HPUX_bigio 176 +#define __NR_HPUX_pipenode 177 +#define __NR_HPUX_lsync 178 +#define __NR_HPUX_getmachineid 179 +#define __NR_HPUX_cnodeid 180 +#define __NR_HPUX_cnodes 181 +#define __NR_HPUX_swapclients 182 +#define __NR_HPUX_rmt_process 183 +#define __NR_HPUX_dskless_stats 184 +#define __NR_HPUX_sigprocmask 185 +#define __NR_HPUX_sigpending 186 +#define __NR_HPUX_sigsuspend 187 +#define __NR_HPUX_sigaction 188 +#define __NR_HPUX_reserved5 189 +#define __NR_HPUX_nfssvc 190 +#define __NR_HPUX_getfh 191 +#define __NR_HPUX_getdomainname 192 +#define __NR_HPUX_setdomainname 193 +#define __NR_HPUX_async_daemon 194 +#define __NR_HPUX_getdirentries 195 +#define __NR_HPUX_statfs 196 +#define __NR_HPUX_fstatfs 197 +#define __NR_HPUX_vfsmount 198 +#define __NR_HPUX_reserved6 199 +#define __NR_HPUX_waitpid 200 +/* 201 - 223 missing */ +#define __NR_HPUX_sigsetreturn 224 +#define __NR_HPUX_sigsetstatemask 225 +/* 226 missing */ +#define __NR_HPUX_cs 227 +#define __NR_HPUX_cds 228 +#define __NR_HPUX_set_no_trunc 229 +#define __NR_HPUX_pathconf 230 +#define __NR_HPUX_fpathconf 231 +/* 232, 233 missing */ +#define __NR_HPUX_nfs_fcntl 234 +#define __NR_HPUX_ogetacl 235 +#define __NR_HPUX_ofgetacl 236 +#define __NR_HPUX_osetacl 237 +#define __NR_HPUX_ofsetacl 238 +#define __NR_HPUX_pstat 239 +#define __NR_HPUX_getaudid 240 +#define __NR_HPUX_setaudid 241 +#define __NR_HPUX_getaudproc 242 +#define __NR_HPUX_setaudproc 243 +#define __NR_HPUX_getevent 244 +#define __NR_HPUX_setevent 245 +#define __NR_HPUX_audwrite 246 +#define __NR_HPUX_audswitch 247 +#define __NR_HPUX_audctl 248 +#define __NR_HPUX_ogetaccess 249 +#define __NR_HPUX_fsctl 250 +/* 251 - 258 missing */ +#define __NR_HPUX_swapfs 259 +#define __NR_HPUX_fss 260 +/* 261 - 266 missing */ +#define __NR_HPUX_tsync 267 +#define __NR_HPUX_getnumfds 268 +#define __NR_HPUX_poll 269 +#define __NR_HPUX_getmsg 270 +#define __NR_HPUX_putmsg 271 +#define __NR_HPUX_fchdir 272 +#define __NR_HPUX_getmount_cnt 273 +#define __NR_HPUX_getmount_entry 274 +#define __NR_HPUX_accept 275 +#define __NR_HPUX_bind 276 +#define __NR_HPUX_connect 277 +#define __NR_HPUX_getpeername 278 +#define __NR_HPUX_getsockname 279 +#define __NR_HPUX_getsockopt 280 +#define __NR_HPUX_listen 281 +#define __NR_HPUX_recv 282 +#define __NR_HPUX_recvfrom 283 +#define __NR_HPUX_recvmsg 284 +#define __NR_HPUX_send 285 +#define __NR_HPUX_sendmsg 286 +#define __NR_HPUX_sendto 287 +#define __NR_HPUX_setsockopt 288 +#define __NR_HPUX_shutdown 289 +#define __NR_HPUX_socket 290 +#define __NR_HPUX_socketpair 291 +#define __NR_HPUX_proc_open 292 +#define __NR_HPUX_proc_close 293 +#define __NR_HPUX_proc_send 294 +#define __NR_HPUX_proc_recv 295 +#define __NR_HPUX_proc_sendrecv 296 +#define __NR_HPUX_proc_syscall 297 +/* 298 - 311 missing */ +#define __NR_HPUX_semctl 312 +#define __NR_HPUX_msgctl 313 +#define __NR_HPUX_shmctl 314 +#define __NR_HPUX_mpctl 315 +#define __NR_HPUX_exportfs 316 +#define __NR_HPUX_getpmsg 317 +#define __NR_HPUX_putpmsg 318 +/* 319 missing */ +#define __NR_HPUX_msync 320 +#define __NR_HPUX_msleep 321 +#define __NR_HPUX_mwakeup 322 +#define __NR_HPUX_msem_init 323 +#define __NR_HPUX_msem_remove 324 +#define __NR_HPUX_adjtime 325 +#define __NR_HPUX_kload 326 +#define __NR_HPUX_fattach 327 +#define __NR_HPUX_fdetach 328 +#define __NR_HPUX_serialize 329 +#define __NR_HPUX_statvfs 330 +#define __NR_HPUX_fstatvfs 331 +#define __NR_HPUX_lchown 332 +#define __NR_HPUX_getsid 333 +#define __NR_HPUX_sysfs 334 +/* 335, 336 missing */ +#define __NR_HPUX_sched_setparam 337 +#define __NR_HPUX_sched_getparam 338 +#define __NR_HPUX_sched_setscheduler 339 +#define __NR_HPUX_sched_getscheduler 340 +#define __NR_HPUX_sched_yield 341 +#define __NR_HPUX_sched_get_priority_max 342 +#define __NR_HPUX_sched_get_priority_min 343 +#define __NR_HPUX_sched_rr_get_interval 344 +#define __NR_HPUX_clock_settime 345 +#define __NR_HPUX_clock_gettime 346 +#define __NR_HPUX_clock_getres 347 +#define __NR_HPUX_timer_create 348 +#define __NR_HPUX_timer_delete 349 +#define __NR_HPUX_timer_settime 350 +#define __NR_HPUX_timer_gettime 351 +#define __NR_HPUX_timer_getoverrun 352 +#define __NR_HPUX_nanosleep 353 +#define __NR_HPUX_toolbox 354 +/* 355 missing */ +#define __NR_HPUX_getdents 356 +#define __NR_HPUX_getcontext 357 +#define __NR_HPUX_sysinfo 358 +#define __NR_HPUX_fcntl64 359 +#define __NR_HPUX_ftruncate64 360 +#define __NR_HPUX_fstat64 361 +#define __NR_HPUX_getdirentries64 362 +#define __NR_HPUX_getrlimit64 363 +#define __NR_HPUX_lockf64 364 +#define __NR_HPUX_lseek64 365 +#define __NR_HPUX_lstat64 366 +#define __NR_HPUX_mmap64 367 +#define __NR_HPUX_setrlimit64 368 +#define __NR_HPUX_stat64 369 +#define __NR_HPUX_truncate64 370 +#define __NR_HPUX_ulimit64 371 +#define __NR_HPUX_pread 372 +#define __NR_HPUX_preadv 373 +#define __NR_HPUX_pwrite 374 +#define __NR_HPUX_pwritev 375 +#define __NR_HPUX_pread64 376 +#define __NR_HPUX_preadv64 377 +#define __NR_HPUX_pwrite64 378 +#define __NR_HPUX_pwritev64 379 +#define __NR_HPUX_setcontext 380 +#define __NR_HPUX_sigaltstack 381 +#define __NR_HPUX_waitid 382 +#define __NR_HPUX_setpgrp 383 +#define __NR_HPUX_recvmsg2 384 +#define __NR_HPUX_sendmsg2 385 +#define __NR_HPUX_socket2 386 +#define __NR_HPUX_socketpair2 387 +#define __NR_HPUX_setregid 388 +#define __NR_HPUX_lwp_create 389 +#define __NR_HPUX_lwp_terminate 390 +#define __NR_HPUX_lwp_wait 391 +#define __NR_HPUX_lwp_suspend 392 +#define __NR_HPUX_lwp_resume 393 +/* 394 missing */ +#define __NR_HPUX_lwp_abort_syscall 395 +#define __NR_HPUX_lwp_info 396 +#define __NR_HPUX_lwp_kill 397 +#define __NR_HPUX_ksleep 398 +#define __NR_HPUX_kwakeup 399 +/* 400 missing */ +#define __NR_HPUX_pstat_getlwp 401 +#define __NR_HPUX_lwp_exit 402 +#define __NR_HPUX_lwp_continue 403 +#define __NR_HPUX_getacl 404 +#define __NR_HPUX_fgetacl 405 +#define __NR_HPUX_setacl 406 +#define __NR_HPUX_fsetacl 407 +#define __NR_HPUX_getaccess 408 +#define __NR_HPUX_lwp_mutex_init 409 +#define __NR_HPUX_lwp_mutex_lock_sys 410 +#define __NR_HPUX_lwp_mutex_unlock 411 +#define __NR_HPUX_lwp_cond_init 412 +#define __NR_HPUX_lwp_cond_signal 413 +#define __NR_HPUX_lwp_cond_broadcast 414 +#define __NR_HPUX_lwp_cond_wait_sys 415 +#define __NR_HPUX_lwp_getscheduler 416 +#define __NR_HPUX_lwp_setscheduler 417 +#define __NR_HPUX_lwp_getstate 418 +#define __NR_HPUX_lwp_setstate 419 +#define __NR_HPUX_lwp_detach 420 +#define __NR_HPUX_mlock 421 +#define __NR_HPUX_munlock 422 +#define __NR_HPUX_mlockall 423 +#define __NR_HPUX_munlockall 424 +#define __NR_HPUX_shm_open 425 +#define __NR_HPUX_shm_unlink 426 +#define __NR_HPUX_sigqueue 427 +#define __NR_HPUX_sigwaitinfo 428 +#define __NR_HPUX_sigtimedwait 429 +#define __NR_HPUX_sigwait 430 +#define __NR_HPUX_aio_read 431 +#define __NR_HPUX_aio_write 432 +#define __NR_HPUX_lio_listio 433 +#define __NR_HPUX_aio_error 434 +#define __NR_HPUX_aio_return 435 +#define __NR_HPUX_aio_cancel 436 +#define __NR_HPUX_aio_suspend 437 +#define __NR_HPUX_aio_fsync 438 +#define __NR_HPUX_mq_open 439 +#define __NR_HPUX_mq_close 440 +#define __NR_HPUX_mq_unlink 441 +#define __NR_HPUX_mq_send 442 +#define __NR_HPUX_mq_receive 443 +#define __NR_HPUX_mq_notify 444 +#define __NR_HPUX_mq_setattr 445 +#define __NR_HPUX_mq_getattr 446 +#define __NR_HPUX_ksem_open 447 +#define __NR_HPUX_ksem_unlink 448 +#define __NR_HPUX_ksem_close 449 +#define __NR_HPUX_ksem_post 450 +#define __NR_HPUX_ksem_wait 451 +#define __NR_HPUX_ksem_read 452 +#define __NR_HPUX_ksem_trywait 453 +#define __NR_HPUX_lwp_rwlock_init 454 +#define __NR_HPUX_lwp_rwlock_destroy 455 +#define __NR_HPUX_lwp_rwlock_rdlock_sys 456 +#define __NR_HPUX_lwp_rwlock_wrlock_sys 457 +#define __NR_HPUX_lwp_rwlock_tryrdlock 458 +#define __NR_HPUX_lwp_rwlock_trywrlock 459 +#define __NR_HPUX_lwp_rwlock_unlock 460 +#define __NR_HPUX_ttrace 461 +#define __NR_HPUX_ttrace_wait 462 +#define __NR_HPUX_lf_wire_mem 463 +#define __NR_HPUX_lf_unwire_mem 464 +#define __NR_HPUX_lf_send_pin_map 465 +#define __NR_HPUX_lf_free_buf 466 +#define __NR_HPUX_lf_wait_nq 467 +#define __NR_HPUX_lf_wakeup_conn_q 468 +#define __NR_HPUX_lf_unused 469 +#define __NR_HPUX_lwp_sema_init 470 +#define __NR_HPUX_lwp_sema_post 471 +#define __NR_HPUX_lwp_sema_wait 472 +#define __NR_HPUX_lwp_sema_trywait 473 +#define __NR_HPUX_lwp_sema_destroy 474 +#define __NR_HPUX_statvfs64 475 +#define __NR_HPUX_fstatvfs64 476 +#define __NR_HPUX_msh_register 477 +#define __NR_HPUX_ptrace64 478 +#define __NR_HPUX_sendfile 479 +#define __NR_HPUX_sendpath 480 +#define __NR_HPUX_sendfile64 481 +#define __NR_HPUX_sendpath64 482 +#define __NR_HPUX_modload 483 +#define __NR_HPUX_moduload 484 +#define __NR_HPUX_modpath 485 +#define __NR_HPUX_getksym 486 +#define __NR_HPUX_modadm 487 +#define __NR_HPUX_modstat 488 +#define __NR_HPUX_lwp_detached_exit 489 +#define __NR_HPUX_crashconf 490 +#define __NR_HPUX_siginhibit 491 +#define __NR_HPUX_sigenable 492 +#define __NR_HPUX_spuctl 493 +#define __NR_HPUX_zerokernelsum 494 +#define __NR_HPUX_nfs_kstat 495 +#define __NR_HPUX_aio_read64 496 +#define __NR_HPUX_aio_write64 497 +#define __NR_HPUX_aio_error64 498 +#define __NR_HPUX_aio_return64 499 +#define __NR_HPUX_aio_cancel64 500 +#define __NR_HPUX_aio_suspend64 501 +#define __NR_HPUX_aio_fsync64 502 +#define __NR_HPUX_lio_listio64 503 +#define __NR_HPUX_recv2 504 +#define __NR_HPUX_recvfrom2 505 +#define __NR_HPUX_send2 506 +#define __NR_HPUX_sendto2 507 +#define __NR_HPUX_acl 508 +#define __NR_HPUX___cnx_p2p_ctl 509 +#define __NR_HPUX___cnx_gsched_ctl 510 +#define __NR_HPUX___cnx_pmon_ctl 511 + +#define __NR_HPUX_syscalls 512 + +/* + * Linux system call numbers. + * + * Cary Coutant says that we should just use another syscall gateway + * page to avoid clashing with the HPUX space, and I think he's right: + * it will would keep a branch out of our syscall entry path, at the + * very least. If we decide to change it later, we can ``just'' tweak + * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be + * 1024 or something. Oh, and recompile libc. =) + * + * 64-bit HPUX binaries get the syscall gateway address passed in a register + * from the kernel at startup, which seems a sane strategy. + */ + +#define __NR_Linux 0 +#define __NR_restart_syscall (__NR_Linux + 0) +#define __NR_exit (__NR_Linux + 1) +#define __NR_fork (__NR_Linux + 2) +#define __NR_read (__NR_Linux + 3) +#define __NR_write (__NR_Linux + 4) +#define __NR_open (__NR_Linux + 5) +#define __NR_close (__NR_Linux + 6) +#define __NR_waitpid (__NR_Linux + 7) +#define __NR_creat (__NR_Linux + 8) +#define __NR_link (__NR_Linux + 9) +#define __NR_unlink (__NR_Linux + 10) +#define __NR_execve (__NR_Linux + 11) +#define __NR_chdir (__NR_Linux + 12) +#define __NR_time (__NR_Linux + 13) +#define __NR_mknod (__NR_Linux + 14) +#define __NR_chmod (__NR_Linux + 15) +#define __NR_lchown (__NR_Linux + 16) +#define __NR_socket (__NR_Linux + 17) +#define __NR_stat (__NR_Linux + 18) +#define __NR_lseek (__NR_Linux + 19) +#define __NR_getpid (__NR_Linux + 20) +#define __NR_mount (__NR_Linux + 21) +#define __NR_bind (__NR_Linux + 22) +#define __NR_setuid (__NR_Linux + 23) +#define __NR_getuid (__NR_Linux + 24) +#define __NR_stime (__NR_Linux + 25) +#define __NR_ptrace (__NR_Linux + 26) +#define __NR_alarm (__NR_Linux + 27) +#define __NR_fstat (__NR_Linux + 28) +#define __NR_pause (__NR_Linux + 29) +#define __NR_utime (__NR_Linux + 30) +#define __NR_connect (__NR_Linux + 31) +#define __NR_listen (__NR_Linux + 32) +#define __NR_access (__NR_Linux + 33) +#define __NR_nice (__NR_Linux + 34) +#define __NR_accept (__NR_Linux + 35) +#define __NR_sync (__NR_Linux + 36) +#define __NR_kill (__NR_Linux + 37) +#define __NR_rename (__NR_Linux + 38) +#define __NR_mkdir (__NR_Linux + 39) +#define __NR_rmdir (__NR_Linux + 40) +#define __NR_dup (__NR_Linux + 41) +#define __NR_pipe (__NR_Linux + 42) +#define __NR_times (__NR_Linux + 43) +#define __NR_getsockname (__NR_Linux + 44) +#define __NR_brk (__NR_Linux + 45) +#define __NR_setgid (__NR_Linux + 46) +#define __NR_getgid (__NR_Linux + 47) +#define __NR_signal (__NR_Linux + 48) +#define __NR_geteuid (__NR_Linux + 49) +#define __NR_getegid (__NR_Linux + 50) +#define __NR_acct (__NR_Linux + 51) +#define __NR_umount2 (__NR_Linux + 52) +#define __NR_getpeername (__NR_Linux + 53) +#define __NR_ioctl (__NR_Linux + 54) +#define __NR_fcntl (__NR_Linux + 55) +#define __NR_socketpair (__NR_Linux + 56) +#define __NR_setpgid (__NR_Linux + 57) +#define __NR_send (__NR_Linux + 58) +#define __NR_uname (__NR_Linux + 59) +#define __NR_umask (__NR_Linux + 60) +#define __NR_chroot (__NR_Linux + 61) +#define __NR_ustat (__NR_Linux + 62) +#define __NR_dup2 (__NR_Linux + 63) +#define __NR_getppid (__NR_Linux + 64) +#define __NR_getpgrp (__NR_Linux + 65) +#define __NR_setsid (__NR_Linux + 66) +#define __NR_pivot_root (__NR_Linux + 67) +#define __NR_sgetmask (__NR_Linux + 68) +#define __NR_ssetmask (__NR_Linux + 69) +#define __NR_setreuid (__NR_Linux + 70) +#define __NR_setregid (__NR_Linux + 71) +#define __NR_mincore (__NR_Linux + 72) +#define __NR_sigpending (__NR_Linux + 73) +#define __NR_sethostname (__NR_Linux + 74) +#define __NR_setrlimit (__NR_Linux + 75) +#define __NR_getrlimit (__NR_Linux + 76) +#define __NR_getrusage (__NR_Linux + 77) +#define __NR_gettimeofday (__NR_Linux + 78) +#define __NR_settimeofday (__NR_Linux + 79) +#define __NR_getgroups (__NR_Linux + 80) +#define __NR_setgroups (__NR_Linux + 81) +#define __NR_sendto (__NR_Linux + 82) +#define __NR_symlink (__NR_Linux + 83) +#define __NR_lstat (__NR_Linux + 84) +#define __NR_readlink (__NR_Linux + 85) +#define __NR_uselib (__NR_Linux + 86) +#define __NR_swapon (__NR_Linux + 87) +#define __NR_reboot (__NR_Linux + 88) +#define __NR_mmap2 (__NR_Linux + 89) +#define __NR_mmap (__NR_Linux + 90) +#define __NR_munmap (__NR_Linux + 91) +#define __NR_truncate (__NR_Linux + 92) +#define __NR_ftruncate (__NR_Linux + 93) +#define __NR_fchmod (__NR_Linux + 94) +#define __NR_fchown (__NR_Linux + 95) +#define __NR_getpriority (__NR_Linux + 96) +#define __NR_setpriority (__NR_Linux + 97) +#define __NR_recv (__NR_Linux + 98) +#define __NR_statfs (__NR_Linux + 99) +#define __NR_fstatfs (__NR_Linux + 100) +#define __NR_stat64 (__NR_Linux + 101) +/* #define __NR_socketcall (__NR_Linux + 102) */ +#define __NR_syslog (__NR_Linux + 103) +#define __NR_setitimer (__NR_Linux + 104) +#define __NR_getitimer (__NR_Linux + 105) +#define __NR_capget (__NR_Linux + 106) +#define __NR_capset (__NR_Linux + 107) +#define __NR_pread64 (__NR_Linux + 108) +#define __NR_pwrite64 (__NR_Linux + 109) +#define __NR_getcwd (__NR_Linux + 110) +#define __NR_vhangup (__NR_Linux + 111) +#define __NR_fstat64 (__NR_Linux + 112) +#define __NR_vfork (__NR_Linux + 113) +#define __NR_wait4 (__NR_Linux + 114) +#define __NR_swapoff (__NR_Linux + 115) +#define __NR_sysinfo (__NR_Linux + 116) +#define __NR_shutdown (__NR_Linux + 117) +#define __NR_fsync (__NR_Linux + 118) +#define __NR_madvise (__NR_Linux + 119) +#define __NR_clone (__NR_Linux + 120) +#define __NR_setdomainname (__NR_Linux + 121) +#define __NR_sendfile (__NR_Linux + 122) +#define __NR_recvfrom (__NR_Linux + 123) +#define __NR_adjtimex (__NR_Linux + 124) +#define __NR_mprotect (__NR_Linux + 125) +#define __NR_sigprocmask (__NR_Linux + 126) +#define __NR_create_module (__NR_Linux + 127) +#define __NR_init_module (__NR_Linux + 128) +#define __NR_delete_module (__NR_Linux + 129) +#define __NR_get_kernel_syms (__NR_Linux + 130) +#define __NR_quotactl (__NR_Linux + 131) +#define __NR_getpgid (__NR_Linux + 132) +#define __NR_fchdir (__NR_Linux + 133) +#define __NR_bdflush (__NR_Linux + 134) +#define __NR_sysfs (__NR_Linux + 135) +#define __NR_personality (__NR_Linux + 136) +#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */ +#define __NR_setfsuid (__NR_Linux + 138) +#define __NR_setfsgid (__NR_Linux + 139) +#define __NR__llseek (__NR_Linux + 140) +#define __NR_getdents (__NR_Linux + 141) +#define __NR__newselect (__NR_Linux + 142) +#define __NR_flock (__NR_Linux + 143) +#define __NR_msync (__NR_Linux + 144) +#define __NR_readv (__NR_Linux + 145) +#define __NR_writev (__NR_Linux + 146) +#define __NR_getsid (__NR_Linux + 147) +#define __NR_fdatasync (__NR_Linux + 148) +#define __NR__sysctl (__NR_Linux + 149) +#define __NR_mlock (__NR_Linux + 150) +#define __NR_munlock (__NR_Linux + 151) +#define __NR_mlockall (__NR_Linux + 152) +#define __NR_munlockall (__NR_Linux + 153) +#define __NR_sched_setparam (__NR_Linux + 154) +#define __NR_sched_getparam (__NR_Linux + 155) +#define __NR_sched_setscheduler (__NR_Linux + 156) +#define __NR_sched_getscheduler (__NR_Linux + 157) +#define __NR_sched_yield (__NR_Linux + 158) +#define __NR_sched_get_priority_max (__NR_Linux + 159) +#define __NR_sched_get_priority_min (__NR_Linux + 160) +#define __NR_sched_rr_get_interval (__NR_Linux + 161) +#define __NR_nanosleep (__NR_Linux + 162) +#define __NR_mremap (__NR_Linux + 163) +#define __NR_setresuid (__NR_Linux + 164) +#define __NR_getresuid (__NR_Linux + 165) +#define __NR_sigaltstack (__NR_Linux + 166) +#define __NR_query_module (__NR_Linux + 167) +#define __NR_poll (__NR_Linux + 168) +#define __NR_nfsservctl (__NR_Linux + 169) +#define __NR_setresgid (__NR_Linux + 170) +#define __NR_getresgid (__NR_Linux + 171) +#define __NR_prctl (__NR_Linux + 172) +#define __NR_rt_sigreturn (__NR_Linux + 173) +#define __NR_rt_sigaction (__NR_Linux + 174) +#define __NR_rt_sigprocmask (__NR_Linux + 175) +#define __NR_rt_sigpending (__NR_Linux + 176) +#define __NR_rt_sigtimedwait (__NR_Linux + 177) +#define __NR_rt_sigqueueinfo (__NR_Linux + 178) +#define __NR_rt_sigsuspend (__NR_Linux + 179) +#define __NR_chown (__NR_Linux + 180) +#define __NR_setsockopt (__NR_Linux + 181) +#define __NR_getsockopt (__NR_Linux + 182) +#define __NR_sendmsg (__NR_Linux + 183) +#define __NR_recvmsg (__NR_Linux + 184) +#define __NR_semop (__NR_Linux + 185) +#define __NR_semget (__NR_Linux + 186) +#define __NR_semctl (__NR_Linux + 187) +#define __NR_msgsnd (__NR_Linux + 188) +#define __NR_msgrcv (__NR_Linux + 189) +#define __NR_msgget (__NR_Linux + 190) +#define __NR_msgctl (__NR_Linux + 191) +#define __NR_shmat (__NR_Linux + 192) +#define __NR_shmdt (__NR_Linux + 193) +#define __NR_shmget (__NR_Linux + 194) +#define __NR_shmctl (__NR_Linux + 195) + +#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */ +#define __NR_putpmsg (__NR_Linux + 197) + +#define __NR_lstat64 (__NR_Linux + 198) +#define __NR_truncate64 (__NR_Linux + 199) +#define __NR_ftruncate64 (__NR_Linux + 200) +#define __NR_getdents64 (__NR_Linux + 201) +#define __NR_fcntl64 (__NR_Linux + 202) +#define __NR_attrctl (__NR_Linux + 203) +#define __NR_acl_get (__NR_Linux + 204) +#define __NR_acl_set (__NR_Linux + 205) +#define __NR_gettid (__NR_Linux + 206) +#define __NR_readahead (__NR_Linux + 207) +#define __NR_tkill (__NR_Linux + 208) +#define __NR_sendfile64 (__NR_Linux + 209) +#define __NR_futex (__NR_Linux + 210) +#define __NR_sched_setaffinity (__NR_Linux + 211) +#define __NR_sched_getaffinity (__NR_Linux + 212) +#define __NR_set_thread_area (__NR_Linux + 213) +#define __NR_get_thread_area (__NR_Linux + 214) +#define __NR_io_setup (__NR_Linux + 215) +#define __NR_io_destroy (__NR_Linux + 216) +#define __NR_io_getevents (__NR_Linux + 217) +#define __NR_io_submit (__NR_Linux + 218) +#define __NR_io_cancel (__NR_Linux + 219) +#define __NR_alloc_hugepages (__NR_Linux + 220) +#define __NR_free_hugepages (__NR_Linux + 221) +#define __NR_exit_group (__NR_Linux + 222) +#define __NR_lookup_dcookie (__NR_Linux + 223) +#define __NR_epoll_create (__NR_Linux + 224) +#define __NR_epoll_ctl (__NR_Linux + 225) +#define __NR_epoll_wait (__NR_Linux + 226) +#define __NR_remap_file_pages (__NR_Linux + 227) +#define __NR_semtimedop (__NR_Linux + 228) +#define __NR_mq_open (__NR_Linux + 229) +#define __NR_mq_unlink (__NR_Linux + 230) +#define __NR_mq_timedsend (__NR_Linux + 231) +#define __NR_mq_timedreceive (__NR_Linux + 232) +#define __NR_mq_notify (__NR_Linux + 233) +#define __NR_mq_getsetattr (__NR_Linux + 234) +#define __NR_waitid (__NR_Linux + 235) +#define __NR_fadvise64_64 (__NR_Linux + 236) +#define __NR_set_tid_address (__NR_Linux + 237) +#define __NR_setxattr (__NR_Linux + 238) +#define __NR_lsetxattr (__NR_Linux + 239) +#define __NR_fsetxattr (__NR_Linux + 240) +#define __NR_getxattr (__NR_Linux + 241) +#define __NR_lgetxattr (__NR_Linux + 242) +#define __NR_fgetxattr (__NR_Linux + 243) +#define __NR_listxattr (__NR_Linux + 244) +#define __NR_llistxattr (__NR_Linux + 245) +#define __NR_flistxattr (__NR_Linux + 246) +#define __NR_removexattr (__NR_Linux + 247) +#define __NR_lremovexattr (__NR_Linux + 248) +#define __NR_fremovexattr (__NR_Linux + 249) +#define __NR_timer_create (__NR_Linux + 250) +#define __NR_timer_settime (__NR_Linux + 251) +#define __NR_timer_gettime (__NR_Linux + 252) +#define __NR_timer_getoverrun (__NR_Linux + 253) +#define __NR_timer_delete (__NR_Linux + 254) +#define __NR_clock_settime (__NR_Linux + 255) +#define __NR_clock_gettime (__NR_Linux + 256) +#define __NR_clock_getres (__NR_Linux + 257) +#define __NR_clock_nanosleep (__NR_Linux + 258) +#define __NR_tgkill (__NR_Linux + 259) +#define __NR_mbind (__NR_Linux + 260) +#define __NR_get_mempolicy (__NR_Linux + 261) +#define __NR_set_mempolicy (__NR_Linux + 262) +#define __NR_vserver (__NR_Linux + 263) +#define __NR_add_key (__NR_Linux + 264) +#define __NR_request_key (__NR_Linux + 265) +#define __NR_keyctl (__NR_Linux + 266) +#define __NR_ioprio_set (__NR_Linux + 267) +#define __NR_ioprio_get (__NR_Linux + 268) +#define __NR_inotify_init (__NR_Linux + 269) +#define __NR_inotify_add_watch (__NR_Linux + 270) +#define __NR_inotify_rm_watch (__NR_Linux + 271) +#define __NR_migrate_pages (__NR_Linux + 272) +#define __NR_pselect6 (__NR_Linux + 273) +#define __NR_ppoll (__NR_Linux + 274) +#define __NR_openat (__NR_Linux + 275) +#define __NR_mkdirat (__NR_Linux + 276) +#define __NR_mknodat (__NR_Linux + 277) +#define __NR_fchownat (__NR_Linux + 278) +#define __NR_futimesat (__NR_Linux + 279) +#define __NR_fstatat64 (__NR_Linux + 280) +#define __NR_unlinkat (__NR_Linux + 281) +#define __NR_renameat (__NR_Linux + 282) +#define __NR_linkat (__NR_Linux + 283) +#define __NR_symlinkat (__NR_Linux + 284) +#define __NR_readlinkat (__NR_Linux + 285) +#define __NR_fchmodat (__NR_Linux + 286) +#define __NR_faccessat (__NR_Linux + 287) +#define __NR_unshare (__NR_Linux + 288) +#define __NR_set_robust_list (__NR_Linux + 289) +#define __NR_get_robust_list (__NR_Linux + 290) +#define __NR_splice (__NR_Linux + 291) +#define __NR_sync_file_range (__NR_Linux + 292) +#define __NR_tee (__NR_Linux + 293) +#define __NR_vmsplice (__NR_Linux + 294) +#define __NR_move_pages (__NR_Linux + 295) +#define __NR_getcpu (__NR_Linux + 296) +#define __NR_epoll_pwait (__NR_Linux + 297) +#define __NR_statfs64 (__NR_Linux + 298) +#define __NR_fstatfs64 (__NR_Linux + 299) +#define __NR_kexec_load (__NR_Linux + 300) +#define __NR_utimensat (__NR_Linux + 301) +#define __NR_signalfd (__NR_Linux + 302) +#define __NR_timerfd (__NR_Linux + 303) +#define __NR_eventfd (__NR_Linux + 304) +#define __NR_fallocate (__NR_Linux + 305) +#define __NR_timerfd_create (__NR_Linux + 306) +#define __NR_timerfd_settime (__NR_Linux + 307) +#define __NR_timerfd_gettime (__NR_Linux + 308) +#define __NR_signalfd4 (__NR_Linux + 309) +#define __NR_eventfd2 (__NR_Linux + 310) +#define __NR_epoll_create1 (__NR_Linux + 311) +#define __NR_dup3 (__NR_Linux + 312) +#define __NR_pipe2 (__NR_Linux + 313) +#define __NR_inotify_init1 (__NR_Linux + 314) +#define __NR_preadv (__NR_Linux + 315) +#define __NR_pwritev (__NR_Linux + 316) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317) +#define __NR_perf_event_open (__NR_Linux + 318) +#define __NR_recvmmsg (__NR_Linux + 319) +#define __NR_accept4 (__NR_Linux + 320) +#define __NR_prlimit64 (__NR_Linux + 321) +#define __NR_fanotify_init (__NR_Linux + 322) +#define __NR_fanotify_mark (__NR_Linux + 323) +#define __NR_clock_adjtime (__NR_Linux + 324) +#define __NR_name_to_handle_at (__NR_Linux + 325) +#define __NR_open_by_handle_at (__NR_Linux + 326) +#define __NR_syncfs (__NR_Linux + 327) +#define __NR_setns (__NR_Linux + 328) +#define __NR_sendmmsg (__NR_Linux + 329) + +#define __NR_Linux_syscalls (__NR_sendmmsg + 1) + + +#define __IGNORE_select /* newselect */ +#define __IGNORE_fadvise64 /* fadvise64_64 */ +#define __IGNORE_utimes /* utime */ + + +#define HPUX_GATEWAY_ADDR 0xC0000004 +#define LINUX_GATEWAY_ADDR 0x100 + +#endif /* _UAPI_ASM_PARISC_UNISTD_H_ */ -- cgit v0.10.2 From 3fca4eba9654ce2f44b82e33044d258945e755bf Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 16 Oct 2012 11:19:17 -0700 Subject: ARM: OMAP: resolve sparse warning concerning debug_card_init() Commit 801475ccb2b2c1928b22aec4b9e5285d9e347602 ("ARM: OMAP: move debug_card_init() function") results in the following new sparse warning: arch/arm/plat-omap/debug-devices.c:71:12: warning: symbol 'debug_card_init' was not declared. Should it be static? Fix by implementing Tony's suggestion to add a "sideways include" to the new location of the debug-devices.h file in arch/arm/mach-omap2/. Signed-off-by: Paul Walmsley Acked-by: Igor Grinberg Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index c7a4c09..5a4678e 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -16,6 +16,7 @@ #include #include +#include "../mach-omap2/debug-devices.h" /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. -- cgit v0.10.2 From a2e5b90b0879e42eee4bef49bd217661abc35ee6 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 16 Oct 2012 11:19:17 -0700 Subject: ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck The GPMC code has been converted to a driver by the following commit: commit da496873970c57c4b31e186d967933da0ffa0d7c Author: Afzal Mohammed Date: Sun Sep 23 17:28:25 2012 -0600 ARM: OMAP2+: gpmc: minimal driver support It now requests a clock with con-id "fck" otherwise the probe will fails. [ 0.342010] omap-gpmc omap-gpmc: error: clk_get [ 0.346771] omap-gpmc: probe of omap-gpmc failed with error -2 Add the "omap-gmpc" dev-id and fck con-id to the already existing gmpc-fck dummy clock. Reported-by: Russell King Signed-off-by: Benoit Cousson Cc: Afzal Mohammed Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index d661d13..6efc30c 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3294,7 +3294,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X), CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), - CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X), + CLK("omap-gpmc", "fck", &dummy_ck, CK_443X), CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), -- cgit v0.10.2 From 49c58e82023649924b1b0f38d715d94093f4044b Mon Sep 17 00:00:00 2001 From: Sebastien Guiriec Date: Tue, 16 Oct 2012 11:19:17 -0700 Subject: ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message Correct DMIC hwmod lockup error message and replace printk() by pr_err(). Signed-off-by: Sebastien Guiriec Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c8c2117..cba60e0 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -341,7 +341,7 @@ static void __init omap_init_dmic(void) oh = omap_hwmod_lookup("dmic"); if (!oh) { - printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + pr_err("Could not look up dmic hw_mod\n"); return; } -- cgit v0.10.2 From 344afa6550a66eb4b7103cf1b65fca6f38d380d8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 Oct 2012 01:01:12 +0200 Subject: MIPS: Hugetlbfs: Handle huge pages correctly in pmd_bad() Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index c26e182..f5b521d 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -9,6 +9,7 @@ #ifndef _ASM_PGTABLE_64_H #define _ASM_PGTABLE_64_H +#include #include #include @@ -172,7 +173,19 @@ static inline int pmd_none(pmd_t pmd) return pmd_val(pmd) == (unsigned long) invalid_pte_table; } -#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) +static inline int pmd_bad(pmd_t pmd) +{ +#ifdef CONFIG_HUGETLB_PAGE + /* pmd_huge(pmd) but inline */ + if (unlikely(pmd_val(pmd) & _PAGE_HUGE)) + return 0; +#endif + + if (unlikely(pmd_val(pmd) & ~PAGE_MASK)) + return 1; + + return 0; +} static inline int pmd_present(pmd_t pmd) { -- cgit v0.10.2 From 01422ff49135e0b747132686405ea8a58f760997 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 Oct 2012 01:01:20 +0200 Subject: MIPS: Restore pagemask after dumping the TLB. Or bad things might happen if the last TLB entry isn't a basic size page. Signed-off-by: Ralf Baechle diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 3f69725..a99c1d3 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -50,8 +50,9 @@ static void dump_tlb(int first, int last) { unsigned long s_entryhi, entryhi, asid; unsigned long long entrylo0, entrylo1; - unsigned int s_index, pagemask, c0, c1, i; + unsigned int s_index, s_pagemask, pagemask, c0, c1, i; + s_pagemask = read_c0_pagemask(); s_entryhi = read_c0_entryhi(); s_index = read_c0_index(); asid = s_entryhi & 0xff; @@ -103,6 +104,7 @@ static void dump_tlb(int first, int last) write_c0_entryhi(s_entryhi); write_c0_index(s_index); + write_c0_pagemask(s_pagemask); } void dump_tlb_all(void) -- cgit v0.10.2 From fb944c9ba3f4838a64929a1926822e987b4e44c0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 Oct 2012 01:01:21 +0200 Subject: MIPS: hugetlbfs: Fix hazard between tlb write and pagemask restoration. On some CPU the write to pagemask might complete before the TLB write instruction reads from the pagemask register. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 87b9cfc..4b9b935 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -320,6 +320,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) tlb_write_random(); else tlb_write_indexed(); + tlbw_use_hazard(); write_c0_pagemask(PM_DEFAULT_MASK); } else #endif -- cgit v0.10.2 From 1f5320d5972aa50d3e8d2b227b636b370e608359 Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Thu, 4 Oct 2012 16:37:16 +0900 Subject: cgroup: notify_on_release may not be triggered in some cases notify_on_release must be triggered when the last process in a cgroup is move to another. But if the first(and only) process in a cgroup is moved to another, notify_on_release is not triggered. # mkdir /cgroup/cpu/SRC # mkdir /cgroup/cpu/DST # # echo 1 >/cgroup/cpu/SRC/notify_on_release # echo 1 >/cgroup/cpu/DST/notify_on_release # # sleep 300 & [1] 8629 # # echo 8629 >/cgroup/cpu/SRC/tasks # echo 8629 >/cgroup/cpu/DST/tasks -> notify_on_release for /SRC must be triggered at this point, but it isn't. This is because put_css_set() is called before setting CGRP_RELEASABLE in cgroup_task_migrate(), and is a regression introduce by the commit:74a1166d(cgroups: make procs file writable), which was merged into v3.0. Cc: Ben Blum Cc: # v3.0.x and later Acked-by: Li Zefan Signed-off-by: Daisuke Nishimura Signed-off-by: Tejun Heo diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 13774b3..d1739fc 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1962,9 +1962,8 @@ static void cgroup_task_migrate(struct cgroup *cgrp, struct cgroup *oldcgrp, * trading it for newcg is protected by cgroup_mutex, we're safe to drop * it here; it will be freed under RCU. */ - put_css_set(oldcg); - set_bit(CGRP_RELEASABLE, &oldcgrp->flags); + put_css_set(oldcg); } /** -- cgit v0.10.2 From 32f8516a8c733d281faa9f6666b509035246505c Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 16 Oct 2012 17:31:23 -0700 Subject: mm, mempolicy: fix printing stack contents in numa_maps When reading /proc/pid/numa_maps, it's possible to return the contents of the stack where the mempolicy string should be printed if the policy gets freed from beneath us. This happens because mpol_to_str() may return an error the stack-allocated buffer is then printed without ever being stored. There are two possible error conditions in mpol_to_str(): - if the buffer allocated is insufficient for the string to be stored, and - if the mempolicy has an invalid mode. The first error condition is not triggered in any of the callers to mpol_to_str(): at least 50 bytes is always allocated on the stack and this is sufficient for the string to be written. A future patch should convert this into BUILD_BUG_ON() since we know the maximum strlen possible, but that's not -rc material. The second error condition is possible if a race occurs in dropping a reference to a task's mempolicy causing it to be freed during the read(). The slab poison value is then used for the mode and mpol_to_str() returns -EINVAL. This race is only possible because get_vma_policy() believes that mm->mmap_sem protects task->mempolicy, which isn't true. The exit path does not hold mm->mmap_sem when dropping the reference or setting task->mempolicy to NULL: it uses task_lock(task) instead. Thus, it's required for the caller of a task mempolicy to hold task_lock(task) while grabbing the mempolicy and reading it. Callers with a vma policy store their mempolicy earlier and can simply increment the reference count so it's guaranteed not to be freed. Reported-by: Dave Jones Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 79827ce..14df880 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -1158,6 +1158,7 @@ static int show_numa_map(struct seq_file *m, void *v, int is_pid) struct vm_area_struct *vma = v; struct numa_maps *md = &numa_priv->md; struct file *file = vma->vm_file; + struct task_struct *task = proc_priv->task; struct mm_struct *mm = vma->vm_mm; struct mm_walk walk = {}; struct mempolicy *pol; @@ -1177,9 +1178,11 @@ static int show_numa_map(struct seq_file *m, void *v, int is_pid) walk.private = md; walk.mm = mm; - pol = get_vma_policy(proc_priv->task, vma, vma->vm_start); + task_lock(task); + pol = get_vma_policy(task, vma, vma->vm_start); mpol_to_str(buffer, sizeof(buffer), pol, 0); mpol_cond_put(pol); + task_unlock(task); seq_printf(m, "%08lx %s", vma->vm_start, buffer); @@ -1189,7 +1192,7 @@ static int show_numa_map(struct seq_file *m, void *v, int is_pid) } else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) { seq_printf(m, " heap"); } else { - pid_t tid = vm_is_stack(proc_priv->task, vma, is_pid); + pid_t tid = vm_is_stack(task, vma, is_pid); if (tid != 0) { /* * Thread stack in /proc/PID/task/TID/maps or diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 0b78fb9..d04a8a5 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1536,9 +1536,8 @@ asmlinkage long compat_sys_mbind(compat_ulong_t start, compat_ulong_t len, * * Returns effective policy for a VMA at specified address. * Falls back to @task or system default policy, as necessary. - * Current or other task's task mempolicy and non-shared vma policies - * are protected by the task's mmap_sem, which must be held for read by - * the caller. + * Current or other task's task mempolicy and non-shared vma policies must be + * protected by task_lock(task) by the caller. * Shared policies [those marked as MPOL_F_SHARED] require an extra reference * count--added by the get_policy() vm_op, as appropriate--to protect against * freeing by another task. It is the caller's responsibility to free the -- cgit v0.10.2 From c772fc26f8938dd526a411a6162db95a33f56028 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Tue, 16 Oct 2012 12:55:19 -0700 Subject: MAINTAINERS: change email after moving for LED subsystem maintaining Signed-off-by: Bryan Wu Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index e73060f..e39e9da 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4372,7 +4372,7 @@ F: Documentation/scsi/53c700.txt F: drivers/scsi/53c700* LED SUBSYSTEM -M: Bryan Wu +M: Bryan Wu M: Richard Purdie L: linux-leds@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git -- cgit v0.10.2 From d1bdc40b3389b1165e705c7794441417ed2a43bd Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 16 Oct 2012 15:53:36 -0500 Subject: IPMI: Remove SMBus driver info from the docs Some documentation for the SMBus driver is in the IPMI docs, but that code is not in the kernel tree at this point. So remove the docs to avoid confusion. Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index b2bea15..16eb4c9 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -42,13 +42,7 @@ The driver interface depends on your hardware. If your system properly provides the SMBIOS info for IPMI, the driver will detect it and just work. If you have a board with a standard interface (These will generally be either "KCS", "SMIC", or "BT", consult your hardware -manual), choose the 'IPMI SI handler' option. A driver also exists -for direct I2C access to the IPMI management controller. Some boards -support this, but it is unknown if it will work on every board. For -this, choose 'IPMI SMBus handler', but be ready to try to do some -figuring to see if it will work on your system if the SMBIOS/APCI -information is wrong or not present. It is fairly safe to have both -these enabled and let the drivers auto-detect what is present. +manual), choose the 'IPMI SI handler' option. You should generally enable ACPI on your system, as systems with IPMI can have ACPI tables describing them. @@ -58,8 +52,7 @@ their job correctly, the IPMI controller should be automatically detected (via ACPI or SMBIOS tables) and should just work. Sadly, many boards do not have this information. The driver attempts standard defaults, but they may not work. If you fall into this -situation, you need to read the section below named 'The SI Driver' or -"The SMBus Driver" on how to hand-configure your system. +situation, you need to read the section below named 'The SI Driver'. IPMI defines a standard watchdog timer. You can enable this with the 'IPMI Watchdog Timer' config option. If you compile the driver into @@ -104,12 +97,7 @@ driver, each open file for this device ties in to the message handler as an IPMI user. ipmi_si - A driver for various system interfaces. This supports KCS, -SMIC, and BT interfaces. Unless you have an SMBus interface or your -own custom interface, you probably need to use this. - -ipmi_smb - A driver for accessing BMCs on the SMBus. It uses the -I2C kernel driver's SMBus interfaces to send and receive IPMI messages -over the SMBus. +SMIC, and BT interfaces. ipmi_watchdog - IPMI requires systems to have a very capable watchdog timer. This driver implements the standard Linux watchdog timer @@ -482,53 +470,6 @@ for specifying an interface. Note that when removing an interface, only the first three parameters (si type, address type, and address) are used for the comparison. Any options are ignored for removing. -The SMBus Driver ----------------- - -The SMBus driver allows up to 4 SMBus devices to be configured in the -system. By default, the driver will register any SMBus interfaces it finds -in the I2C address range of 0x20 to 0x4f on any adapter. You can change this -at module load time (for a module) with: - - modprobe ipmi_smb.o - addr=,[,,[,...]] - dbg=,... - [defaultprobe=1] [dbg_probe=1] - -The addresses are specified in pairs, the first is the adapter ID and the -second is the I2C address on that adapter. - -The debug flags are bit flags for each BMC found, they are: -IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8 - -Setting smb_defaultprobe to zero disabled the default probing of SMBus -interfaces at address range 0x20 to 0x4f. This means that only the -BMCs specified on the smb_addr line will be detected. - -Setting smb_dbg_probe to 1 will enable debugging of the probing and -detection process for BMCs on the SMBusses. - -Discovering the IPMI compliant BMC on the SMBus can cause devices -on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI -message as a block write to the I2C bus and waits for a response. -This action can be detrimental to some I2C devices. It is highly recommended -that the known I2c address be given to the SMBus driver in the smb_addr -parameter. The default address range will not be used when a smb_addr -parameter is provided. - -When compiled into the kernel, the addresses can be specified on the -kernel command line as: - - ipmb_smb.addr=,[,,[,...]] - ipmi_smb.dbg=,... - ipmi_smb.defaultprobe=0 ipmi_smb.dbg_probe=1 - -These are the same options as on the module command line. - -Note that you might need some I2C changes if CONFIG_IPMI_PANIC_EVENT -is enabled along with this, so the I2C driver knows to run to -completion during sending a panic event. - Other Pieces ------------ -- cgit v0.10.2 From 4033741ff9f727fbf5efb9337c826703534d49b7 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 16 Oct 2012 15:53:37 -0500 Subject: ACPI: Reorder IPMI driver before any other ACPI drivers Drivers may make calls that require the ACPI IPMI driver to have been initialised already, so make sure that it appears earlier in the build order. Signed-off-by: Matthew Garrett Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 47199e2..82422fe 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -47,6 +47,10 @@ acpi-y += video_detect.o endif # These are (potentially) separate modules + +# IPMI may be used by other drivers, so it has to initialise before them +obj-$(CONFIG_ACPI_IPMI) += acpi_ipmi.o + obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BUTTON) += button.o obj-$(CONFIG_ACPI_FAN) += fan.o @@ -70,6 +74,5 @@ processor-y += processor_idle.o processor_thermal.o processor-$(CONFIG_CPU_FREQ) += processor_perflib.o obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o -obj-$(CONFIG_ACPI_IPMI) += acpi_ipmi.o obj-$(CONFIG_ACPI_APEI) += apei/ -- cgit v0.10.2 From 061475b65c126454aaaaddcbd40e7118424fc860 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 16 Oct 2012 15:53:38 -0500 Subject: IPMI: Change link order IPMI must be initialised before ACPI in order to ensure that any IPMI services are available before ACPI driver initialisation attempts to use any IPMI operation regions. Signed-off-by: Matthew Garrett Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds diff --git a/drivers/Makefile b/drivers/Makefile index 03da5b6..a16a8d0 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -17,6 +17,10 @@ obj-$(CONFIG_PARISC) += parisc/ obj-$(CONFIG_RAPIDIO) += rapidio/ obj-y += video/ obj-y += idle/ + +# IPMI must come before ACPI in order to provide IPMI opregion support +obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/ + obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_SFI) += sfi/ # PnP must come after ACPI since it will eventually need to check if acpi diff --git a/drivers/char/Makefile b/drivers/char/Makefile index d0b27a3..7ff1d0d 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -52,7 +52,6 @@ obj-$(CONFIG_TELCLOCK) += tlclk.o obj-$(CONFIG_MWAVE) += mwave/ obj-$(CONFIG_AGP) += agp/ obj-$(CONFIG_PCMCIA) += pcmcia/ -obj-$(CONFIG_IPMI_HANDLER) += ipmi/ obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o obj-$(CONFIG_TCG_TPM) += tpm/ -- cgit v0.10.2 From 9ebca93bf3b350910c66516cbec68899eeddfd8e Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 16 Oct 2012 15:53:39 -0500 Subject: IPMI: Fix some uninitialized warning There was a spot where the compiler couldn't tell some variables would be set. So initialize them to make the warning go away. Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 2c29942..a0c84bb 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -1880,7 +1880,7 @@ int ipmi_request_supply_msgs(ipmi_user_t user, struct ipmi_recv_msg *supplied_recv, int priority) { - unsigned char saddr, lun; + unsigned char saddr = 0, lun = 0; int rv; if (!user) -- cgit v0.10.2 From a6c16c2803089f032f86fe15e952176c0713d6e3 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 16 Oct 2012 15:53:40 -0500 Subject: IPMI: Detect register spacing on PCI interfaces The IPMI spec defines a way to detect register spacing for PCI interfaces, so implement it. Signed-off-by: Steven Hsieh Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 83f85cf..32a6c7e 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2424,6 +2424,38 @@ static void ipmi_pci_cleanup(struct smi_info *info) pci_disable_device(pdev); } +static int __devinit ipmi_pci_probe_regspacing(struct smi_info *info) +{ + if (info->si_type == SI_KCS) { + unsigned char status; + int regspacing; + + info->io.regsize = DEFAULT_REGSIZE; + info->io.regshift = 0; + info->io_size = 2; + info->handlers = &kcs_smi_handlers; + + /* detect 1, 4, 16byte spacing */ + for (regspacing = DEFAULT_REGSPACING; regspacing <= 16;) { + info->io.regspacing = regspacing; + if (info->io_setup(info)) { + dev_err(info->dev, + "Could not setup I/O space\n"); + return DEFAULT_REGSPACING; + } + /* write invalid cmd */ + info->io.outputb(&info->io, 1, 0x10); + /* read status back */ + status = info->io.inputb(&info->io, 1); + info->io_cleanup(info); + if (status) + return regspacing; + regspacing *= 4; + } + } + return DEFAULT_REGSPACING; +} + static int __devinit ipmi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -2476,8 +2508,8 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev, } info->io.addr_data = pci_resource_start(pdev, 0); - info->io.regspacing = DEFAULT_REGSPACING; - info->io.regsize = DEFAULT_REGSPACING; + info->io.regspacing = ipmi_pci_probe_regspacing(info); + info->io.regsize = DEFAULT_REGSIZE; info->io.regshift = 0; info->irq = pdev->irq; -- cgit v0.10.2 From 85eae82a0855d49852b87deac8653e4ebc8b291f Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 15 Oct 2012 21:35:59 -0700 Subject: printk: Fix scheduling-while-atomic problem in console_cpu_notify() The console_cpu_notify() function runs with interrupts disabled in the CPU_DYING case. It therefore cannot block, for example, as will happen when it calls console_lock(). Therefore, remove the CPU_DYING leg of the switch statement to avoid this problem. Signed-off-by: Paul E. McKenney Reviewed-by: Srivatsa S. Bhat Signed-off-by: Linus Torvalds diff --git a/kernel/printk.c b/kernel/printk.c index 66a2ea3..2d607f4 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1890,7 +1890,6 @@ static int __cpuinit console_cpu_notify(struct notifier_block *self, switch (action) { case CPU_ONLINE: case CPU_DEAD: - case CPU_DYING: case CPU_DOWN_FAILED: case CPU_UP_CANCELED: console_lock(); -- cgit v0.10.2 From 819e1c53ac6410f0ffbc2ee36b7de96988cdcf32 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Oct 2012 00:10:13 +0100 Subject: FRV: Fix VLIW packing constraint violation in entry.S Fix VLIW packing constraint violation in entry.S: arch/frv/kernel/entry.S: Assembler messages: arch/frv/kernel/entry.S:871: Error: VLIW packing constraint violation When packing CALLL with OR, CALLL must go in the first slot. The instructions are executed simultaneously, so it doesn't matter which way round they're packed from that point of view. Signed-off-by: David Howells Acked-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 0027329..ee0beb3 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -867,8 +867,8 @@ ret_from_fork: ret_from_kernel_thread: lddi.p @(gr28,#REG_GR(8)),gr20 call schedule_tail - or.p gr20,gr20,gr8 - calll @(gr21,gr0) + calll.p @(gr21,gr0) + or gr20,gr20,gr8 bra sys_exit .globl ret_from_kernel_execve -- cgit v0.10.2 From ce7bfc7cde0acd46a1d342fd64a0be15ad9e7930 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Oct 2012 00:10:21 +0100 Subject: FRV: Fix incorrect symbol in copy_thread() Fix an incorrect symbol in copy_thread(): arch/frv/kernel/process.c: In function 'copy_thread': arch/frv/kernel/process.c:197: error: 'chilregs' undeclared (first use in this function) arch/frv/kernel/process.c:197: error: (Each undeclared identifier is reported only once arch/frv/kernel/process.c:197: error: for each function it appears in.) Reported-by: Geert Uytterhoeven Signed-off-by: David Howells Acked-by: Al Viro cc: Geert Uytterhoeven Signed-off-by: Linus Torvalds diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index 655d90d..e1e3aa1 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -194,7 +194,7 @@ int copy_thread(unsigned long clone_flags, memset(childregs, 0, sizeof(struct pt_regs)); childregs->gr9 = usp; /* function */ childregs->gr8 = arg; - chilregs->psr = PSR_S; + childregs->psr = PSR_S; p->thread.pc = (unsigned long) ret_from_kernel_thread; save_user_regs(p->thread.user); return 0; -- cgit v0.10.2 From b4b5087173d09507f425714bc8d270615e5800b1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 16 Oct 2012 00:10:28 +0100 Subject: FRV: Fix const sections change Add __pminitconst to fix the build, otherwise the following error can occur: arch/frv/kernel/setup.c:187:47: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token arch/frv/kernel/setup.c:386:2: error: 'clock_cmodes' undeclared (first use in this function) arch/frv/kernel/setup.c:571:6: error: 'clock_cmodes' undeclared (first use in this function) make[2]: *** [arch/frv/kernel/setup.o] Error 1 http://kisskb.ellerman.id.au/kisskb/buildresult/7344691/ Reported-by: Geert Uytterhoeven Signed-off-by: Andi Kleen Signed-off-by: David Howells cc: Geert Uytterhoeven Signed-off-by: Linus Torvalds diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index 1f1e5ef..b8993c8 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -112,9 +112,11 @@ char __initdata redboot_command_line[COMMAND_LINE_SIZE]; #ifdef CONFIG_PM #define __pminit #define __pminitdata +#define __pminitconst #else #define __pminit __init #define __pminitdata __initdata +#define __pminitconst __initconst #endif struct clock_cmode { -- cgit v0.10.2 From 0c552e5fb9bec3d4942663a2a90e04a685fd8482 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Oct 2012 00:10:35 +0100 Subject: FRV: Fix linux/elf-fdpic.h It seems I accidentally switched the guard on linux/elf-fdpic.h from #ifdef __KERNEL__ to #ifndef __KERNEL__ when attempting to expand the guarded region to cover the elf_fdpic_params struct when doing the UAPI split - with the result that the struct became unavailable to kernel code. Move incorrectly guarded bits back to the kernelspace header. Whilst we're at it, the __KERNEL__ guards can be deleted as they're no longer necessary. Reported-by: Fengguang Wu Reported-by: Lars-Peter Clausen Signed-off-by: David Howells cc: Fengguang Wu cc: Lars-Peter Clausen cc: uclinux-dev@uclinux.org Signed-off-by: Linus Torvalds diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h new file mode 100644 index 0000000..3864403 --- /dev/null +++ b/include/linux/elf-fdpic.h @@ -0,0 +1,51 @@ +/* FDPIC ELF load map + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_ELF_FDPIC_H +#define _LINUX_ELF_FDPIC_H + +#include + +/* + * binfmt binary parameters structure + */ +struct elf_fdpic_params { + struct elfhdr hdr; /* ref copy of ELF header */ + struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */ + struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */ + unsigned long elfhdr_addr; /* mapped ELF header user address */ + unsigned long ph_addr; /* mapped PT_PHDR user address */ + unsigned long map_addr; /* mapped loadmap user address */ + unsigned long entry_addr; /* mapped entry user address */ + unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */ + unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */ + unsigned long load_addr; /* user address at which to map binary */ + unsigned long flags; +#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */ +#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */ +#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */ +#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant + * displacement */ +#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */ +#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */ +#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */ +#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */ +#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ +}; + +#ifdef CONFIG_MMU +extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, + struct elf_fdpic_params *interp_params, + unsigned long *start_stack, + unsigned long *start_brk); +#endif + +#endif /* _LINUX_ELF_FDPIC_H */ diff --git a/include/uapi/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h index 1065078..3921e33 100644 --- a/include/uapi/linux/elf-fdpic.h +++ b/include/uapi/linux/elf-fdpic.h @@ -9,8 +9,8 @@ * 2 of the License, or (at your option) any later version. */ -#ifndef _LINUX_ELF_FDPIC_H -#define _LINUX_ELF_FDPIC_H +#ifndef _UAPI_LINUX_ELF_FDPIC_H +#define _UAPI_LINUX_ELF_FDPIC_H #include @@ -31,40 +31,4 @@ struct elf32_fdpic_loadmap { #define ELF32_FDPIC_LOADMAP_VERSION 0x0000 -#ifndef __KERNEL__ -/* - * binfmt binary parameters structure - */ -struct elf_fdpic_params { - struct elfhdr hdr; /* ref copy of ELF header */ - struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */ - struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */ - unsigned long elfhdr_addr; /* mapped ELF header user address */ - unsigned long ph_addr; /* mapped PT_PHDR user address */ - unsigned long map_addr; /* mapped loadmap user address */ - unsigned long entry_addr; /* mapped entry user address */ - unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */ - unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */ - unsigned long load_addr; /* user address at which to map binary */ - unsigned long flags; -#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */ -#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */ -#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */ -#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant - * displacement */ -#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */ -#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */ -#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */ -#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */ -#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ -}; - -#ifdef CONFIG_MMU -extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, - struct elf_fdpic_params *interp_params, - unsigned long *start_stack, - unsigned long *start_brk); -#endif -#endif /* __KERNEL__ */ - -#endif /* _LINUX_ELF_FDPIC_H */ +#endif /* _UAPI_LINUX_ELF_FDPIC_H */ -- cgit v0.10.2 From d856f1eb56ae3d935fb502441aa37b650aeba683 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 14 Oct 2012 04:32:55 +0200 Subject: spi: mxs: Assign message status after transfer finished In the current code implementing the MXS SPI driver, every transferred message had assigned status = 0, which is not correct. Properly assign status returned from the I/O functions. Signed-off-by: Marek Vasut Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index edf1360..5a63bcd 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -480,7 +480,7 @@ static int mxs_spi_transfer_one(struct spi_master *master, first = last = 0; } - m->status = 0; + m->status = status; spi_finalize_current_message(master); return status; -- cgit v0.10.2 From 44968466cfb969f960dbe422bbc785117f497729 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 14 Oct 2012 04:32:56 +0200 Subject: spi: mxs: Terminate DMA in case of DMA timeout In case the SPI DMA times out, the DMA might still be in some kind of inconsistent state. Issue dmaengine_terminate_all() on the particular channel to kill off all operations before continuing. Signed-off-by: Marek Vasut Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 5a63bcd..86dd04d 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -323,6 +323,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs, if (!ret) { dev_err(ssp->dev, "DMA transfer timeout\n"); ret = -ETIMEDOUT; + dmaengine_terminate_all(ssp->dmach); goto err_vmalloc; } -- cgit v0.10.2 From 0243c53634987ce7a3d1e39ae55c17800d9436c8 Mon Sep 17 00:00:00 2001 From: "Shimoda, Yoshihiro" Date: Thu, 2 Aug 2012 17:17:33 +0900 Subject: spi: spi-rspi: fix build error for the latest shdma driver Because the latest shdma driver changed, it caused build error in the spi-rspi driver. This patch fixed the build error. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 4894bde..30faf6d 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -147,8 +147,6 @@ struct rspi_data { unsigned char spsr; /* for dmaengine */ - struct sh_dmae_slave dma_tx; - struct sh_dmae_slave dma_rx; struct dma_chan *chan_tx; struct dma_chan *chan_rx; int irq; @@ -663,20 +661,16 @@ static irqreturn_t rspi_irq(int irq, void *_sr) return ret; } -static bool rspi_filter(struct dma_chan *chan, void *filter_param) -{ - chan->private = filter_param; - return true; -} - -static void __devinit rspi_request_dma(struct rspi_data *rspi, - struct platform_device *pdev) +static int __devinit rspi_request_dma(struct rspi_data *rspi, + struct platform_device *pdev) { struct rspi_plat_data *rspi_pd = pdev->dev.platform_data; dma_cap_mask_t mask; + struct dma_slave_config cfg; + int ret; if (!rspi_pd) - return; + return 0; /* The driver assumes no error. */ rspi->dma_width_16bit = rspi_pd->dma_width_16bit; @@ -684,21 +678,35 @@ static void __devinit rspi_request_dma(struct rspi_data *rspi, if (rspi_pd->dma_rx_id && rspi_pd->dma_tx_id) { dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - rspi->dma_rx.slave_id = rspi_pd->dma_rx_id; - rspi->chan_rx = dma_request_channel(mask, rspi_filter, - &rspi->dma_rx); - if (rspi->chan_rx) - dev_info(&pdev->dev, "Use DMA when rx.\n"); + rspi->chan_rx = dma_request_channel(mask, shdma_chan_filter, + (void *)rspi_pd->dma_rx_id); + if (rspi->chan_rx) { + cfg.slave_id = rspi_pd->dma_rx_id; + cfg.direction = DMA_DEV_TO_MEM; + ret = dmaengine_slave_config(rspi->chan_rx, &cfg); + if (!ret) + dev_info(&pdev->dev, "Use DMA when rx.\n"); + else + return ret; + } } if (rspi_pd->dma_tx_id) { dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - rspi->dma_tx.slave_id = rspi_pd->dma_tx_id; - rspi->chan_tx = dma_request_channel(mask, rspi_filter, - &rspi->dma_tx); - if (rspi->chan_tx) - dev_info(&pdev->dev, "Use DMA when tx\n"); + rspi->chan_tx = dma_request_channel(mask, shdma_chan_filter, + (void *)rspi_pd->dma_tx_id); + if (rspi->chan_tx) { + cfg.slave_id = rspi_pd->dma_tx_id; + cfg.direction = DMA_MEM_TO_DEV; + ret = dmaengine_slave_config(rspi->chan_tx, &cfg); + if (!ret) + dev_info(&pdev->dev, "Use DMA when tx\n"); + else + return ret; + } } + + return 0; } static void __devexit rspi_release_dma(struct rspi_data *rspi) @@ -788,7 +796,11 @@ static int __devinit rspi_probe(struct platform_device *pdev) } rspi->irq = irq; - rspi_request_dma(rspi, pdev); + ret = rspi_request_dma(rspi, pdev); + if (ret < 0) { + dev_err(&pdev->dev, "rspi_request_dma failed.\n"); + goto error4; + } ret = spi_register_master(master); if (ret < 0) { -- cgit v0.10.2 From 2f5f1ce90a5fa097372bb895452a718e4d33e4e3 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 17 Aug 2012 14:47:30 +0300 Subject: spi: tsc2005: delete soon-obsolete e-mail address Delete soon-obsolete e-mail address. Signed-off-by: Aaro Koskinen Signed-off-by: Mark Brown diff --git a/include/linux/spi/tsc2005.h b/include/linux/spi/tsc2005.h index d9b0c84..8f721e4 100644 --- a/include/linux/spi/tsc2005.h +++ b/include/linux/spi/tsc2005.h @@ -3,8 +3,6 @@ * * Copyright (C) 2009-2010 Nokia Corporation * - * Contact: Aaro Koskinen - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or -- cgit v0.10.2 From 308b3afb97dc342e9c4f958d8b4c459ae0e22bd7 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 17 Oct 2012 16:47:11 +0900 Subject: ARM: SAMSUNG: Add naming of s3c64xx-spi devices Commit a5238e360b71 (spi: s3c64xx: move controller information into driver data) introduced separate device names for the different subtypes of the spi controller but forgot to set these in the relevant machines. To fix this introduce a s3c64xx_spi_setname function and populate all Samsung arches with the correct names. The function resides in a new header, as the s3c64xx-spi.h contains driver platform data and should therefore at some later point move out of the Samsung include dir. Tested on a s3c2416-based machine. Signed-off-by: Heiko Stuebner Cc: Stable Reviewed-by: Sylwester Nawrocki [s.nawrocki@samsung.com: tested on mach-exynos] Tested-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 715b690..1947be8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include "common.h" @@ -346,6 +347,8 @@ static void __init exynos4_map_io(void) s5p_fb_setname(0, "exynos4-fb"); s5p_hdmi_setname("exynos4-hdmi"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -366,6 +369,8 @@ static void __init exynos5_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index ed5a95ec..77ee0b7 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -61,6 +61,7 @@ #include #include #include +#include static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -132,6 +133,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); + s3c64xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index ab648ad..165b6a6 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -43,6 +43,7 @@ #include #include #include +#include static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,6 +101,9 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; + /* initialize device information early */ + s3c64xx_spi_setname("s3c2443-spi"); + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 6e6a0a9..111e404 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include @@ -179,6 +180,7 @@ void __init s5p6440_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); @@ -193,6 +195,7 @@ void __init s5p6450_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index 6219086..cc6e561 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -165,6 +166,8 @@ void __init s5pc100_map_io(void) s3c_onenand_setname("s5pc100-onenand"); s3c_fb_setname("s5pc100-fb"); s3c_cfcon_setname("s5pc100-pata"); + + s3c64xx_spi_setname("s5pc100-spi"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 4c9e902..a0c50ef 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include "common.h" @@ -196,6 +197,8 @@ void __init s5pv210_map_io(void) /* setup TV devices */ s5p_hdmi_setname("s5pv210-hdmi"); + + s3c64xx_spi_setname("s5pv210-spi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h new file mode 100644 index 0000000..0b9428a --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/spi-core.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_S3C_SPI_CORE_H +#define __PLAT_S3C_SPI_CORE_H + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c64xx_spi_setname(char *name) +{ +#ifdef CONFIG_S3C64XX_DEV_SPI0 + s3c64xx_device_spi0.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI1 + s3c64xx_device_spi1.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI2 + s3c64xx_device_spi2.name = name; +#endif +} + +#endif /* __PLAT_S3C_SPI_CORE_H */ -- cgit v0.10.2 From 2ad5b9e4bd314fc685086b99e90e5de3bc59e26b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 16 Oct 2012 22:33:29 +0000 Subject: netfilter: xt_TEE: don't use destination address found in header Torsten Luettgert bisected TEE regression starting with commit f8126f1d5136be1 (ipv4: Adjust semantics of rt->rt_gateway.) The problem is that it tries to ARP-lookup the original destination address of the forwarded packet, not the address of the gateway. Fix this using FLOWI_FLAG_KNOWN_NH Julian added in commit c92b96553a80c1 (ipv4: Add FLOWI_FLAG_KNOWN_NH), so that known nexthop (info->gw.ip) has preference on resolving. Reported-by: Torsten Luettgert Bisected-by: Torsten Luettgert Tested-by: Torsten Luettgert Cc: Julian Anastasov Signed-off-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/xt_TEE.c b/net/netfilter/xt_TEE.c index ee2e5bc..bd93e51 100644 --- a/net/netfilter/xt_TEE.c +++ b/net/netfilter/xt_TEE.c @@ -70,6 +70,7 @@ tee_tg_route4(struct sk_buff *skb, const struct xt_tee_tginfo *info) fl4.daddr = info->gw.ip; fl4.flowi4_tos = RT_TOS(iph->tos); fl4.flowi4_scope = RT_SCOPE_UNIVERSE; + fl4.flowi4_flags = FLOWI_FLAG_KNOWN_NH; rt = ip_route_output_key(net, &fl4); if (IS_ERR(rt)) return false; -- cgit v0.10.2 From 59cf19a4fa2b8832f04f4c2b846c7cade52e475d Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 17 Oct 2012 18:10:34 +0900 Subject: ARM: dts: Split memory into 4 sections for exynos4210-trats Since the maximum section size on mach-exynos is set to 256MiB, boards with memory configuration defined using sections bigger than 256MiB will fail to boot with a kernel panic. This patch modifies the dts file of Samsung Trats board to define four sections of 256MiB instead of two of 512MiB to fix the boot problem. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 73567b8..a21511c 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -20,8 +20,10 @@ compatible = "samsung,trats", "samsung,exynos4210"; memory { - reg = <0x40000000 0x20000000 - 0x60000000 0x20000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { -- cgit v0.10.2 From a7c2e1aad6c846f316641bbaa54cf999aeaa7ebc Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 17 Oct 2012 11:17:16 +0200 Subject: drm/i915: shut up spurious WARN in the gtt fault handler -ENOSPC can happen if userspace is being simplistic and tries to map a too big object. To aid further spurious WARN debugging, also print out the error code. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56017 Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index bb941f8..45888d2 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1408,8 +1408,10 @@ out: return VM_FAULT_NOPAGE; case -ENOMEM: return VM_FAULT_OOM; + case -ENOSPC: + return VM_FAULT_SIGBUS; default: - WARN_ON_ONCE(ret); + WARN_ONCE(ret, "unhandled error in i915_gem_fault: %i\n", ret); return VM_FAULT_SIGBUS; } } -- cgit v0.10.2 From 9233ef6b559faa3db14144f41dea2e70d1ad0092 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 26 Sep 2012 16:22:32 +0100 Subject: ASoC: bells: Correct typo in sub speaker DAI name for WM5110 Signed-off-by: Mark Brown diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c index a2ca156..b0d46d6 100644 --- a/sound/soc/samsung/bells.c +++ b/sound/soc/samsung/bells.c @@ -212,7 +212,7 @@ static struct snd_soc_dai_link bells_dai_wm5102[] = { { .name = "Sub", .stream_name = "Sub", - .cpu_dai_name = "wm5102-aif3", + .cpu_dai_name = "wm5110-aif3", .codec_dai_name = "wm9081-hifi", .codec_name = "wm9081.1-006c", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -- cgit v0.10.2 From 71aa5ebe36a4e936eff281b375a4707b6a8320f2 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 17 Oct 2012 12:43:44 +0200 Subject: ALSA: hda - Always check array bounds in alc_get_line_out_pfx Even when CONFIG_SND_DEBUG is not enabled, we don't want to return an arbitrary memory location when the channel count is larger than we expected. Cc: stable@kernel.org Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8253b4e..48d9d60 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2598,8 +2598,10 @@ static const char *alc_get_line_out_pfx(struct alc_spec *spec, int ch, return "PCM"; break; } - if (snd_BUG_ON(ch >= ARRAY_SIZE(channel_name))) + if (ch >= ARRAY_SIZE(channel_name)) { + snd_BUG(); return "PCM"; + } return channel_name[ch]; } -- cgit v0.10.2 From 3c5994c83895c89d344f24a86276f00d308e142b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 17 Oct 2012 12:25:44 +0100 Subject: uapi: Allow automatic generation of uapi/asm/ header files Several arch/*/include/uapi/asm/* header simply include the corresponding file. This patch allows such files to be specified in uapi/asm/Kbuild via "generic-y += ..." to be automatically generated (similar to asm/Kbuild). Signed-off-by: Catalin Marinas Signed-off-by: David Howells Cc: Michal Marek Cc: Arnd Bergmann diff --git a/Makefile b/Makefile index 5be2ee8..366d0ab 100644 --- a/Makefile +++ b/Makefile @@ -437,7 +437,9 @@ endif PHONY += asm-generic asm-generic: $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ - obj=arch/$(SRCARCH)/include/generated/asm + src=asm obj=arch/$(SRCARCH)/include/generated/asm + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm # To make sure we do not include .config for any of the *config targets # catch them early, and hand them over to scripts/kconfig/Makefile diff --git a/scripts/Makefile.asm-generic b/scripts/Makefile.asm-generic index 40caf3c..d17e0ea 100644 --- a/scripts/Makefile.asm-generic +++ b/scripts/Makefile.asm-generic @@ -5,7 +5,7 @@ # and for each file listed in this file with generic-y creates # a small wrapper file in $(obj) (arch/$(SRCARCH)/include/generated/asm) -kbuild-file := $(srctree)/arch/$(SRCARCH)/include/asm/Kbuild +kbuild-file := $(srctree)/arch/$(SRCARCH)/include/$(src)/Kbuild -include $(kbuild-file) include scripts/Kbuild.include -- cgit v0.10.2 From 886927e4a4fb520d663c012f29d2f466915d7bd2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:15 +0100 Subject: UAPI: Make uapi/linux/irqnr.h non-empty uapi/linux/irqnr.h was emitted by the UAPI disintegration script as an empty file because the parent linux/irqnr.h had no UAPI stuff in it, despite being marked with "header-y". Unfortunately, the patch program deletes the empty file when applying a kernel patch. It's not clear why this file is part of the UAPI at all. Looking in: /usr/include/linux/irqnr.h there's nothing there but a header reinclusion guard and a comment. So just stick a comment in there as a placeholder. Without this, if the kernel is fabricated from, say, a tarball and a patch, you can get this error when building x86_64 or usermode Linux (and probably others): include/linux/irqnr.h:4:30: fatal error: uapi/linux/irqnr.h: No such file or directory Reported-by: Randy Dunlap Reported-by: Alessandro Suardi Signed-off-by: David Howells cc: Randy Dunlap cc: Alessandro Suardi diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h index e69de29..ae5704f 100644 --- a/include/uapi/linux/irqnr.h +++ b/include/uapi/linux/irqnr.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ -- cgit v0.10.2 From 0238047018d34946c08afc2f9e19053a3c25f0e1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:15 +0100 Subject: UAPI: Remove empty conditionals from include/linux/Kbuild Remove empty conditionals from include/linux/Kbuild as the contents, with new conditionals, have moved to include/uapi/linux/Kbuild. Signed-off-by: David Howells diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 5b57367..7729c58 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -19,13 +19,3 @@ header-y += netfilter_ipv4/ header-y += netfilter_ipv6/ header-y += usb/ header-y += wimax/ - -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),) -endif -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),) -endif -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),) -endif -- cgit v0.10.2 From 64d7155cdfe5546ca0730daf7dd73ee52a74eeaf Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:15 +0100 Subject: UAPI: Remove empty non-UAPI Kbuild files Remove non-UAPI Kbuild files that have become empty as a result of UAPI disintegration. They used to have only header-y lines in them and those have now moved to the Kbuild files in the corresponding uapi/ directories. Possibly these should not be removed but rather have a comment inserted to say they are intentionally left blank. This would make it easier to add generated header lines in future without having to restore the infrastructure. Note that at this point not all the UAPI disintegration parts have been merged, so it is likely that more empty Kbuild files will turn up. It is probably necessary to make the files non-empty to prevent the patch program from automatically deleting them when it reduces them to nothing. Signed-off-by: David Howells diff --git a/include/Kbuild b/include/Kbuild index 8d226bf..83256b6 100644 --- a/include/Kbuild +++ b/include/Kbuild @@ -1,12 +1,8 @@ # Top-level Makefile calls into asm-$(ARCH) # List only non-arch directories below -header-y += asm-generic/ header-y += linux/ header-y += sound/ -header-y += mtd/ header-y += rdma/ header-y += video/ -header-y += drm/ -header-y += xen/ header-y += scsi/ diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/drm/Kbuild b/include/drm/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 7729c58..7fe2dae 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -1,21 +1,5 @@ -header-y += byteorder/ -header-y += can/ -header-y += caif/ header-y += dvb/ header-y += hdlc/ header-y += hsi/ -header-y += isdn/ -header-y += mmc/ -header-y += nfsd/ header-y += raid/ -header-y += spi/ -header-y += sunrpc/ -header-y += tc_act/ -header-y += tc_ematch/ -header-y += netfilter/ -header-y += netfilter_arp/ -header-y += netfilter_bridge/ -header-y += netfilter_ipv4/ -header-y += netfilter_ipv6/ header-y += usb/ -header-y += wimax/ diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/caif/Kbuild b/include/linux/caif/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/isdn/Kbuild b/include/linux/isdn/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild deleted file mode 100644 index b332202..0000000 --- a/include/linux/netfilter/Kbuild +++ /dev/null @@ -1 +0,0 @@ -header-y += ipset/ diff --git a/include/linux/netfilter/ipset/Kbuild b/include/linux/netfilter/ipset/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/netfilter_arp/Kbuild b/include/linux/netfilter_arp/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/netfilter_bridge/Kbuild b/include/linux/netfilter_bridge/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/spi/Kbuild b/include/linux/spi/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/sunrpc/Kbuild b/include/linux/sunrpc/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/tc_act/Kbuild b/include/linux/tc_act/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/tc_ematch/Kbuild b/include/linux/tc_ematch/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild deleted file mode 100644 index e69de29..0000000 diff --git a/include/xen/Kbuild b/include/xen/Kbuild deleted file mode 100644 index e69de29..0000000 -- cgit v0.10.2 From 4c7b279c1a03392184c75fa5f38b58e2b9c882cf Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:16 +0100 Subject: UAPI: Place comments in empty arch Kbuilds to make them non-empty Place comments in: arch/mips/include/asm/Kbuild arch/tile/include/arch/Kbuild to make them non-empty so that the patch program doesn't remove them when it reduces them to nothing. Possibly they should be just deleted, but it's possible that they'll acquire generic-y or genhdr-y lines in future, so I'm keeping them around for the moment. Note that MIPS will compile happily if the file is deleted instead. I haven't tested TILE, but I suspect it will be the same there. Signed-off-by: David Howells cc: Ralf Baechle cc: Chris Metcalf diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index e69de29..533053d 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -0,0 +1 @@ +# MIPS headers diff --git a/arch/tile/include/arch/Kbuild b/arch/tile/include/arch/Kbuild index e69de29..3751c9f 100644 --- a/arch/tile/include/arch/Kbuild +++ b/arch/tile/include/arch/Kbuild @@ -0,0 +1 @@ +# Tile arch headers -- cgit v0.10.2 From e4522fcb5a29ec55640082b445200e01d61e50ba Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:16 +0100 Subject: UAPI: The tile arch uses the generic ucontext.h file Move the header-y and generic-y lines for ucontext.h from arch/tile/include/asm/Kbuild to the uapi/ Kbuild as the asm-generic variant is used. Signed-off-by: David Howells cc: Chris Metcalf diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild index c68808a..6948015 100644 --- a/arch/tile/include/asm/Kbuild +++ b/arch/tile/include/asm/Kbuild @@ -1,8 +1,6 @@ header-y += ../arch/ -header-y += ucontext.h - generic-y += bug.h generic-y += bugs.h generic-y += clkdev.h @@ -37,5 +35,4 @@ generic-y += statfs.h generic-y += termbits.h generic-y += termios.h generic-y += types.h -generic-y += ucontext.h generic-y += xor.h diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild index 5c6915f..c20db8e 100644 --- a/arch/tile/include/uapi/asm/Kbuild +++ b/arch/tile/include/uapi/asm/Kbuild @@ -15,4 +15,7 @@ header-y += siginfo.h header-y += signal.h header-y += stat.h header-y += swab.h +header-y += ucontext.h header-y += unistd.h + +generic-y += ucontext.h -- cgit v0.10.2 From 0420c87e648a3b623ad925038a0bcff2ef5a4bc9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:32:07 +0100 Subject: UAPI: Put a comment into uapi/asm-generic/kvm_para.h and use it from arches Make uapi/asm-generic/kvm_para.h non-empty by addition of a comment to stop the patch program from deleting it when it creates it. Then delete empty arch-specific uapi/asm/kvm_para.h files and tell the Kbuild files to use the generic instead. Should this perhaps instead be a #warning or #error that the facility is unsupported on this arch? Signed-off-by: David Howells cc: Arnd Bergmann cc: Avi Kivity cc: Marcelo Tosatti cc: kvm@vger.kernel.org diff --git a/arch/ia64/include/uapi/asm/Kbuild b/arch/ia64/include/uapi/asm/Kbuild index 30cafac..1b3f5eb 100644 --- a/arch/ia64/include/uapi/asm/Kbuild +++ b/arch/ia64/include/uapi/asm/Kbuild @@ -1,6 +1,8 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +generic-y += kvm_para.h + header-y += auxvec.h header-y += bitsperlong.h header-y += break.h diff --git a/arch/ia64/include/uapi/asm/kvm_para.h b/arch/ia64/include/uapi/asm/kvm_para.h deleted file mode 100644 index e69de29..0000000 diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild index 7bf68ff..59b67ed 100644 --- a/arch/s390/include/uapi/asm/Kbuild +++ b/arch/s390/include/uapi/asm/Kbuild @@ -1,6 +1,8 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +generic-y += kvm_para.h + header-y += auxvec.h header-y += bitsperlong.h header-y += byteorder.h diff --git a/arch/s390/include/uapi/asm/kvm_para.h b/arch/s390/include/uapi/asm/kvm_para.h deleted file mode 100644 index e69de29..0000000 diff --git a/include/uapi/asm-generic/kvm_para.h b/include/uapi/asm-generic/kvm_para.h index e69de29..486f0af 100644 --- a/include/uapi/asm-generic/kvm_para.h +++ b/include/uapi/asm-generic/kvm_para.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here, but the file must not be empty or patch + * will delete it. + */ -- cgit v0.10.2 From 11b8d2460c538697b813a8281db783f7bb7eb0ef Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:32:35 +0100 Subject: UAPI: Make arch/mn10300/include/uapi/asm/setup.h non-empty arch/mn10300/include/uapi/asm/setup.h was emitted by the UAPI disintegration script as an empty file because the parent file had no UAPI stuff in it, despite being marked with "header-y". Unfortunately, the patch program deletes resultant empty files when applying a kernel patch. So just stick a comment in there as a placeholder. Signed-off-by: David Howells diff --git a/arch/mn10300/include/uapi/asm/setup.h b/arch/mn10300/include/uapi/asm/setup.h index e69de29..ae5704f 100644 --- a/arch/mn10300/include/uapi/asm/setup.h +++ b/arch/mn10300/include/uapi/asm/setup.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ -- cgit v0.10.2 From 588be3004da625eacb6ba091627e023986165d3b Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:32:35 +0100 Subject: UAPI: Make arch/sh/include/uapi/asm/hw_breakpoint.h non-empty arch/sh/include/uapi/asm/hw_breakpoint.h was emitted by the UAPI disintegration script as an empty file because the parent file had no UAPI stuff in it, despite being marked with "header-y". Unfortunately, the patch program deletes resultant empty files when applying a kernel patch. So just stick a comment in there as a placeholder. Signed-off-by: David Howells cc: Paul Mundt cc: linux-sh@vger.kernel.org diff --git a/arch/sh/include/uapi/asm/hw_breakpoint.h b/arch/sh/include/uapi/asm/hw_breakpoint.h index e69de29..ae5704f 100644 --- a/arch/sh/include/uapi/asm/hw_breakpoint.h +++ b/arch/sh/include/uapi/asm/hw_breakpoint.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ -- cgit v0.10.2 From bb2bab177408e44079ba6bd37242fa8b26dfc2a7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:32:35 +0100 Subject: UAPI: Make arch/sparc/include/uapi/asm/sigcontext.h non-empty arch/sparc/include/uapi/asm/sigcontext.h was emitted by the UAPI disintegration script as an empty file because the parent file had no UAPI stuff in it, despite being marked with "header-y". Unfortunately, the patch program deletes resultant empty files when applying a kernel patch. So just stick a comment in there as a placeholder. Signed-off-by: David Howells cc: David S. Miller cc: sparclinux@vger.kernel.org diff --git a/arch/sparc/include/uapi/asm/sigcontext.h b/arch/sparc/include/uapi/asm/sigcontext.h index e69de29..ae5704f 100644 --- a/arch/sparc/include/uapi/asm/sigcontext.h +++ b/arch/sparc/include/uapi/asm/sigcontext.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ -- cgit v0.10.2 From 3a40414f826a8f1096d9b94c4a53ef91b25ba28d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 1 Oct 2012 15:52:00 +0200 Subject: mac80211: connect with HT20 if HT40 is not permitted Some changes to fix issues with HT40 APs in Korea and follow-up changes to allow using HT40 even if the local regulatory database disallows it caused issues with iwlwifi (and could cause issues with other devices); iwlwifi firmware would assert if you tried to connect to an AP that has an invalid configuration (e.g. using HT40- on channel 140.) Fix this, while avoiding the "Korean AP" issue by disabling HT40 and advertising HT20 to the AP when connecting. Cc: stable@vger.kernel.org [3.6] Reported-by: Florian Reitmeir Tested-by: Florian Reitmeir Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e510a33..1b7eed2 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3099,22 +3099,32 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ht_cfreq, ht_oper->primary_chan, cbss->channel->band); ht_oper = NULL; + } else { + channel_type = NL80211_CHAN_HT20; } } - if (ht_oper) { - channel_type = NL80211_CHAN_HT20; + if (ht_oper && sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + /* + * cfg80211 already verified that the channel itself can + * be used, but it didn't check that we can do the right + * HT type, so do that here as well. If HT40 isn't allowed + * on this channel, disable 40 MHz operation. + */ - if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { - switch (ht_oper->ht_param & - IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40PLUS) + ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; + else channel_type = NL80211_CHAN_HT40PLUS; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40MINUS) + ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; + else channel_type = NL80211_CHAN_HT40MINUS; - break; - } + break; } } -- cgit v0.10.2 From 5784ee4dcbb896f5367855540b264e21a0c33854 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Mon, 15 Oct 2012 15:50:25 +0800 Subject: regmap: select REGMAP if REGMAP_MMIO and REGMAP_IRQ enabled The regmap_mmio and regmap_irq depend on regmap core, if not select, we may not compile regmap core and meet compiling errors as follows if REGMAP_MMIO is selected by client drivers: drivers/mfd/syscon.c:94:15: error: variable 'syscon_regmap_config' has initializer but incomplete type drivers/mfd/syscon.c:95:2: error: unknown field 'reg_bits' specified in initializer drivers/mfd/syscon.c:95:2: warning: excess elements in struct initializer [enabled by default] drivers/mfd/syscon.c:95:2: warning: (near initialization for 'syscon_regmap_config') [enabled by default] drivers/mfd/syscon.c:96:2: error: unknown field 'val_bits' specified in initializer drivers/mfd/syscon.c:96:2: warning: excess elements in struct initializer [enabled by default] drivers/mfd/syscon.c:96:2: warning: (near initialization for 'syscon_regmap_config') [enabled by default] drivers/mfd/syscon.c:97:2: error: unknown field 'reg_stride' specified in initializer drivers/mfd/syscon.c:97:2: warning: excess elements in struct initializer [enabled by default] drivers/mfd/syscon.c:97:2: warning: (near initialization for 'syscon_regmap_config') [enabled by default] drivers/mfd/syscon.c: In function 'syscon_probe': drivers/mfd/syscon.c:124:2: error: invalid use of undefined type 'struct regmap_config' drivers/mfd/syscon.c:125:2: error: implicit declaration of function 'devm_regmap_init_mmio' [-Werror=implicit-function-declaration] drivers/mfd/syscon.c:125:17: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors drivers/mfd/Kconfig: config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" depends on OF select REGMAP_MMIO help Select this option to enable accessing system control registers via regmap. Signed-off-by: Dong Aisheng Signed-off-by: Mark Brown diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig index 6be390b..f0d3054 100644 --- a/drivers/base/regmap/Kconfig +++ b/drivers/base/regmap/Kconfig @@ -3,7 +3,7 @@ # subsystems should select the appropriate symbols. config REGMAP - default y if (REGMAP_I2C || REGMAP_SPI) + default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_MMIO || REGMAP_IRQ) select LZO_COMPRESS select LZO_DECOMPRESS select IRQ_DOMAIN if REGMAP_IRQ -- cgit v0.10.2 From c10356b9846b13651a8a24c3a31e029ffe6eafd9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 16:31:27 +0000 Subject: spi/s3c64xx: use correct dma_transfer_direction type There is a subtle difference between dma_transfer_direction and dma_data_direction: the former is used by the dmaengine framework, while the latter is used by the dma-mapping API. Although the purpose is comparable, the actual values are different and must not be mixed. In this case, the driver just wants to use dma_transfer_direction. Without this patch, building s3c6400_defconfig results in: drivers/spi/spi-s3c64xx.c: In function 's3c64xx_spi_dmacb': drivers/spi/spi-s3c64xx.c:239:21: warning: comparison between 'enum dma_data_direction' and 'enum dma_transfer_direction' [-Wenum-compare] As pointed out by Kukjin Kim, this also changes the use of constants from DMA_FROM_DEVICE/DMA_TO_DEVICE to DMA_DEV_TO_MEM/DMA_MEM_TO_DEV. Signed-off-by: Arnd Bergmann Acked-by: Kukjin Kim Cc: Ben Dooks Cc: Grant Likely Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: spi-devel-general@lists.sourceforge.net diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index d1c8441f..cd43b4b 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -132,7 +132,7 @@ struct s3c64xx_spi_dma_data { unsigned ch; - enum dma_data_direction direction; + enum dma_transfer_direction direction; enum dma_ch dmach; struct property *dma_prop; }; @@ -1065,11 +1065,11 @@ static int __devinit s3c64xx_spi_get_dmares( if (tx) { dma_data = &sdd->tx_dma; - dma_data->direction = DMA_TO_DEVICE; + dma_data->direction = DMA_MEM_TO_DEV; chan_str = "tx"; } else { dma_data = &sdd->rx_dma; - dma_data->direction = DMA_FROM_DEVICE; + dma_data->direction = DMA_DEV_TO_MEM; chan_str = "rx"; } -- cgit v0.10.2 From 5276b6877efb8a180e254a06d7497f802f6f9755 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 12 Oct 2012 11:03:28 +0000 Subject: ARM: s3c: mark s3c2440_clk_add as __init_refok s3c2440_clk_add is a subsys_interface method and calls clkdev_add_table, which is marked as __init. The modpost script complains about this because we must not call an __init function from a function in the .text section, and we cannot reference an __init function from a subsys_interface pointer. I have verified that the only code path into s3c2440_clk_add() is from "int __init s3c2440_init(void)", so s3c2440_clk_add can be marked __init_refok instead. Without this patch, building mini2440_defconfig results in: WARNING: vmlinux.o(.text+0x9848): Section mismatch in reference from the function s3c2440_clk_add() to the function .init.text:clkdev_add_table() The function s3c2440_clk_add() references the function __init clkdev_add_table(). This is often because s3c2440_clk_add lacks a __init annotation or the annotation of clkdev_add_table is wrong. Signed-off-by: Arnd Bergmann Acked-by: Kukjin Kim Cc: Russell King Cc: Mike Turquette Cc: Ben Dooks diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index cb2883d..937a571 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -149,7 +149,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), }; -static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) +static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; -- cgit v0.10.2 From cd0b16c1c3cda12dbed1f8de8f1a9b0591990724 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 13 Oct 2012 00:30:28 -0400 Subject: NLM: nlm_lookup_file() may return NLMv4-specific error codes If the filehandle is stale, or open access is denied for some reason, nlm_fopen() may return one of the NLMv4-specific error codes nlm4_stale_fh or nlm4_failed. These get passed right through nlm_lookup_file(), and so when nlmsvc_retrieve_args() calls the latter, it needs to filter the result through the cast_status() machinery. Failure to do so, will trigger the BUG_ON() in encode_nlm_stat... Signed-off-by: Trond Myklebust Reported-by: Larry McVoy Cc: stable@kernel.org Signed-off-by: J. Bruce Fields diff --git a/fs/lockd/clntxdr.c b/fs/lockd/clntxdr.c index d269ada..982d267 100644 --- a/fs/lockd/clntxdr.c +++ b/fs/lockd/clntxdr.c @@ -223,7 +223,7 @@ static void encode_nlm_stat(struct xdr_stream *xdr, { __be32 *p; - BUG_ON(be32_to_cpu(stat) > NLM_LCK_DENIED_GRACE_PERIOD); + WARN_ON_ONCE(be32_to_cpu(stat) > NLM_LCK_DENIED_GRACE_PERIOD); p = xdr_reserve_space(xdr, 4); *p = stat; } diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c index 3009a36..21171f0 100644 --- a/fs/lockd/svcproc.c +++ b/fs/lockd/svcproc.c @@ -68,7 +68,8 @@ nlmsvc_retrieve_args(struct svc_rqst *rqstp, struct nlm_args *argp, /* Obtain file pointer. Not used by FREE_ALL call. */ if (filp != NULL) { - if ((error = nlm_lookup_file(rqstp, &file, &lock->fh)) != 0) + error = cast_status(nlm_lookup_file(rqstp, &file, &lock->fh)); + if (error != 0) goto no_locks; *filp = file; -- cgit v0.10.2 From 4e7a4b01222343481d8ff084dbef9b80f7089a19 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Tue, 16 Oct 2012 11:38:06 +0200 Subject: jfs: Fix FITRIM argument handling Currently when 'range->start' is beyond the end of file system nothing is done and that fact is ignored, where in fact we should return EINVAL. The same problem is when 'range.len' is smaller than file system block. Fix this by adding check for such conditions and return EINVAL appropriately. Signed-off-by: Lukas Czerner Acked-by: Tino Reichardt Signed-off-by: Dave Kleikamp diff --git a/fs/jfs/jfs_discard.c b/fs/jfs/jfs_discard.c index 9947563..dfcd503 100644 --- a/fs/jfs/jfs_discard.c +++ b/fs/jfs/jfs_discard.c @@ -83,7 +83,7 @@ int jfs_ioc_trim(struct inode *ip, struct fstrim_range *range) struct bmap *bmp = JFS_SBI(ip->i_sb)->bmap; struct super_block *sb = ipbmap->i_sb; int agno, agno_end; - s64 start, end, minlen; + u64 start, end, minlen; u64 trimmed = 0; /** @@ -93,15 +93,19 @@ int jfs_ioc_trim(struct inode *ip, struct fstrim_range *range) * minlen: minimum extent length in Bytes */ start = range->start >> sb->s_blocksize_bits; - if (start < 0) - start = 0; end = start + (range->len >> sb->s_blocksize_bits) - 1; - if (end >= bmp->db_mapsize) - end = bmp->db_mapsize - 1; minlen = range->minlen >> sb->s_blocksize_bits; - if (minlen <= 0) + if (minlen == 0) minlen = 1; + if (minlen > bmp->db_agsize || + start >= bmp->db_mapsize || + range->len < sb->s_blocksize) + return -EINVAL; + + if (end >= bmp->db_mapsize) + end = bmp->db_mapsize - 1; + /** * we trim all ag's within the range */ -- cgit v0.10.2 From 356712f6e296fdae1edae51b96b485ed830bdc0c Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 16 Oct 2012 14:51:04 -0300 Subject: perf python: Initialize 'page_size' variable The commit 0c1fe6b: 'perf tools: Have the page size value available for all tools' Broke the python binding because the global variable 'page_size' is initialized on the main() routine, that is not called when using just the python binding, causing evlist.mmap() to fail because it expects that variable to be initialized to the system's page size. Fix it by initializing it on the binding init routine. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index 9181bf2..a2657fd 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -1015,6 +1015,8 @@ PyMODINIT_FUNC initperf(void) pyrf_cpu_map__setup_types() < 0) return; + page_size = sysconf(_SC_PAGE_SIZE); + Py_INCREF(&pyrf_evlist__type); PyModule_AddObject(module, "evlist", (PyObject*)&pyrf_evlist__type); -- cgit v0.10.2 From f8de2885eba35d20a062325bcdfe5d71e9dc2222 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 16 Oct 2012 14:53:24 -0300 Subject: perf python: Link with libtraceevent The evsel methods to read tracepoint fields uses libtraceevent functions, becoming needed by the python binding as well. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-j3o4v7jyvp9ke9n230l96a1m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py index d0f9f29..09c3cea 100644 --- a/tools/perf/util/setup.py +++ b/tools/perf/util/setup.py @@ -31,6 +31,7 @@ perf = Extension('perf', sources = ext_sources, include_dirs = ['util/include'], extra_compile_args = cflags, + extra_objects = [build_tmp + '/../../libtraceevent.a'], ) setup(name='perf', -- cgit v0.10.2 From 77626081849c9050b20670e5d832aca54c966936 Mon Sep 17 00:00:00 2001 From: David Miller Date: Wed, 17 Oct 2012 01:06:56 -0400 Subject: perf tools: Fix build on sparc. More UAPI stuff. Signed-off-by: David S. Miller Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20121017.010656.383828471689899431.davem@davemloft.net Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/perf.h b/tools/perf/perf.h index 87f4ec6..8421c20 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -57,7 +57,7 @@ void get_term_dimensions(struct winsize *ws); #endif #ifdef __sparc__ -#include "../../arch/sparc/include/asm/unistd.h" +#include "../../arch/sparc/include/uapi/asm/unistd.h" #define rmb() asm volatile("":::"memory") #define cpu_relax() asm volatile("":::"memory") #define CPUINFO_PROC "cpu" -- cgit v0.10.2 From a40b012f76e4016af7a56a9671904118b23107e8 Mon Sep 17 00:00:00 2001 From: Antony Pavlov Date: Tue, 16 Oct 2012 01:38:46 +0400 Subject: MIPS: JZ4740: Fix '#include guard' in serial.h Signed-off-by: Antony Pavlov Cc: linux-mips@linux-mips.org Cc: Lars-Peter Clausen Patchwork: https://patchwork.linux-mips.org/patch/4424/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/jz4740/serial.h b/arch/mips/jz4740/serial.h index b9fe3ad..aa5a939 100644 --- a/arch/mips/jz4740/serial.h +++ b/arch/mips/jz4740/serial.h @@ -14,6 +14,7 @@ */ #ifndef __MIPS_JZ4740_SERIAL_H__ +#define __MIPS_JZ4740_SERIAL_H__ void jz4740_serial_out(struct uart_port *p, int offset, int value); -- cgit v0.10.2 From a12265400c18e6e67d444f05fec3a792a2f87c10 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 Oct 2012 17:00:50 +0200 Subject: MIPS: JZ4740: Forward declare struct uart_port in header. As suggested by Geert Uytterhoeven . Signed-off-by: Ralf Baechle Cc: Antony Pavlov Cc: linux-mips@linux-mips.org Cc: Lars-Peter Clausen diff --git a/arch/mips/jz4740/serial.h b/arch/mips/jz4740/serial.h index aa5a939..8eb715b 100644 --- a/arch/mips/jz4740/serial.h +++ b/arch/mips/jz4740/serial.h @@ -16,6 +16,8 @@ #ifndef __MIPS_JZ4740_SERIAL_H__ #define __MIPS_JZ4740_SERIAL_H__ +struct uart_port; + void jz4740_serial_out(struct uart_port *p, int offset, int value); #endif -- cgit v0.10.2 From 64e29fd5ed42f5d0ff5b0ea9395b3abd5d43f89b Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:05:32 +0300 Subject: ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable Previously the code only acquired spinlock after increasing / decreasing the usecount value, which is wrong. This leaves a small window where a task switch may occur between the check of the usecount and the actual wakeup / sleep of the domain. Fixed by moving the spinlock locking before the usecount access. Left the usecount as atomic_t if someone wants an easy access to the parameter through atomic_read. Signed-off-by: Tero Kristo Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index cbb8791..512e79a 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -925,15 +925,18 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) return -EINVAL; + spin_lock_irqsave(&clkdm->lock, flags); + /* * For arch's with no autodeps, clkcm_clk_enable * should be called for every clock instance or hwmod that is * enabled, so the clkdm can be force woken up. */ - if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) + if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) { + spin_unlock_irqrestore(&clkdm->lock, flags); return 0; + } - spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_enable(clkdm); pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); @@ -950,15 +953,19 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm) if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; + spin_lock_irqsave(&clkdm->lock, flags); + if (atomic_read(&clkdm->usecount) == 0) { + spin_unlock_irqrestore(&clkdm->lock, flags); WARN_ON(1); /* underflow */ return -ERANGE; } - if (atomic_dec_return(&clkdm->usecount) > 0) + if (atomic_dec_return(&clkdm->usecount) > 0) { + spin_unlock_irqrestore(&clkdm->lock, flags); return 0; + } - spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_disable(clkdm); pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); -- cgit v0.10.2 From 8119024ef7363591fd958ec89ebfaee7c18209e3 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 17 Oct 2012 09:41:25 -0500 Subject: ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory Currently, if the GPMC driver fails to reserve memory when probed we will call BUG() and the kernel will not boot. Instead of calling BUG(), return an error from probe and allow kernel to boot. Boot tested on AM335x beagle bone board and OMAP4430 Panda board. V2 changes: - Ensure that clock and memory resources are released on error. Signed-off-by: Jon Hunter Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5ac5cf3..92b5718 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -868,9 +868,9 @@ static void __devexit gpmc_mem_exit(void) } -static void __devinit gpmc_mem_init(void) +static int __devinit gpmc_mem_init(void) { - int cs; + int cs, rc; unsigned long boot_rom_space = 0; /* never allocate the first page, to facilitate bug detection; @@ -890,13 +890,21 @@ static void __devinit gpmc_mem_init(void) if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_get_memconf(cs, &base, &size); - if (gpmc_cs_insert_mem(cs, base, size) < 0) - BUG(); + rc = gpmc_cs_insert_mem(cs, base, size); + if (IS_ERR_VALUE(rc)) { + while (--cs >= 0) + if (gpmc_cs_mem_enabled(cs)) + gpmc_cs_delete_mem(cs); + return rc; + } } + + return 0; } static __devinit int gpmc_probe(struct platform_device *pdev) { + int rc; u32 l; struct resource *res; @@ -936,7 +944,13 @@ static __devinit int gpmc_probe(struct platform_device *pdev) dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); - gpmc_mem_init(); + rc = gpmc_mem_init(); + if (IS_ERR_VALUE(rc)) { + clk_disable_unprepare(gpmc_l3_clk); + clk_put(gpmc_l3_clk); + dev_err(gpmc_dev, "failed to reserve memory\n"); + return rc; + } if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); -- cgit v0.10.2 From 10f571d09106c3eb85951896522c9650596eff2e Mon Sep 17 00:00:00 2001 From: Maxim Kachur Date: Wed, 17 Oct 2012 18:18:10 +0200 Subject: ALSA: emu10k1: add chip details for E-mu 1010 PCIe card Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id. Signed-off-by: Maxim Kachur Signed-off-by: Takashi Iwai diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index bed4485..c21adb6 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1416,6 +1416,15 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0108_chip = 1, .spk71 = 1, .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */ + /* Tested by Maxim Kachur 17th Oct 2012. */ + /* This is MAEM8986, 0202 is MAEM8980 */ + {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102, + .driver = "Audigy2", .name = "E-mu 1010 PCIe [MAEM8986]", + .id = "EMU1010", + .emu10k2_chip = 1, + .ca0108_chip = 1, + .spk71 = 1, + .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */ /* Tested by James@superbug.co.uk 8th July 2005. */ /* This is MAEM8810, 0202 is MAEM8820 */ {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102, -- cgit v0.10.2 From 88a21d2f07d2a4bec2e3e03dd50a39683b938b10 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 17 Oct 2012 13:54:08 -0300 Subject: perf hists browser: Add back callchain folding symbol The commit 5395a04841fc ("perf hists: Separate overhead and baseline columns") makes the "Overhead" column no more the first one, this caused the test that checks if it is time to show if a histogram entry has callchains never hits. Fix it by checking if the 'i' variable is equal to PERF_HPP__OVERHEAD instead of 0. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-w3lcbx0fx1fnh3l2cbq40q2e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index fe4430a..ef2f93c 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -647,7 +647,7 @@ static int hist_browser__show_entry(struct hist_browser *browser, ui_browser__set_percent_color(&browser->b, percent, current_entry); - if (i == 0 && symbol_conf.use_callchain) { + if (i == PERF_HPP__OVERHEAD && symbol_conf.use_callchain) { slsmg_printf("%c ", folded_sign); width -= 2; } -- cgit v0.10.2 From 529b89ef7ff898397ff3a44b527816a82d0c699c Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 25 Sep 2012 02:02:13 +0200 Subject: ARM: dove: Add pcie clock support As dove now has clock gating control ensure pcie ports grab their clocks. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index bb15b26..0ef4435 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -10,6 +10,7 @@ #include #include +#include #include