From 7711308ae68900a047782f5fe1bd46196ea8be0e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 30 Sep 2010 15:37:53 -0700 Subject: ASoC: Implement interrupt based jack detection Allow microphone detection on WM8962 to be performed using the interrupt signal, allowing the detection of both microphone presence and button presses with a signal singal from the CODEC to CPU. Currently a 250ms debounce time is applied to both short circuit and presence detection, this has not been optimised. Signed-off-by: Mark Brown Acked-by: Liam Girdwood diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index eb66c66..3a1db4a 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -63,6 +64,9 @@ struct wm8962_priv { int fll_fref; int fll_fout; + struct delayed_work mic_work; + struct snd_soc_jack *jack; + struct regulator_bulk_data supplies[WM8962_NUM_SUPPLIES]; struct notifier_block disable_nb[WM8962_NUM_SUPPLIES]; @@ -1462,9 +1466,40 @@ static struct snd_soc_dai_driver wm8962_dai = { .symmetric_rates = 1, }; +static void wm8962_mic_work(struct work_struct *work) +{ + struct wm8962_priv *wm8962 = container_of(work, + struct wm8962_priv, + mic_work.work); + struct snd_soc_codec *codec = wm8962->codec; + int status = 0; + int irq_pol = 0; + int reg; + + reg = snd_soc_read(codec, WM8962_ADDITIONAL_CONTROL_4); + + if (reg & WM8962_MICDET_STS) { + status |= SND_JACK_MICROPHONE; + irq_pol |= WM8962_MICD_IRQ_POL; + } + + if (reg & WM8962_MICSHORT_STS) { + status |= SND_JACK_BTN_0; + irq_pol |= WM8962_MICSCD_IRQ_POL; + } + + snd_soc_jack_report(wm8962->jack, status, + SND_JACK_MICROPHONE | SND_JACK_BTN_0); + + snd_soc_update_bits(codec, WM8962_MICINT_SOURCE_POL, + WM8962_MICSCD_IRQ_POL | + WM8962_MICD_IRQ_POL, irq_pol); +} + static irqreturn_t wm8962_irq(int irq, void *data) { struct snd_soc_codec *codec = data; + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); int mask; int active; @@ -1479,12 +1514,59 @@ static irqreturn_t wm8962_irq(int irq, void *data) if (active & WM8962_TEMP_SHUT_EINT) dev_crit(codec->dev, "Thermal shutdown\n"); + if (active & (WM8962_MICSCD_EINT | WM8962_MICD_EINT)) { + dev_dbg(codec->dev, "Microphone event detected\n"); + + schedule_delayed_work(&wm8962->mic_work, + msecs_to_jiffies(250)); + } + /* Acknowledge the interrupts */ snd_soc_write(codec, WM8962_INTERRUPT_STATUS_2, active); return IRQ_HANDLED; } +/** + * wm8962_mic_detect - Enable microphone detection via the WM8962 IRQ + * + * @codec: WM8962 codec + * @jack: jack to report detection events on + * + * Enable microphone detection via IRQ on the WM8962. If GPIOs are + * being used to bring out signals to the processor then only platform + * data configuration is needed for WM8962 and processor GPIOs should + * be configured using snd_soc_jack_add_gpios() instead. + * + * If no jack is supplied detection will be disabled. + */ +int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) +{ + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + int irq_mask, enable; + + wm8962->jack = jack; + if (jack) { + irq_mask = 0; + enable = WM8962_MICDET_ENA; + } else { + irq_mask = WM8962_MICD_EINT | WM8962_MICSCD_EINT; + enable = 0; + } + + snd_soc_update_bits(codec, WM8962_INTERRUPT_STATUS_2_MASK, + WM8962_MICD_EINT | WM8962_MICSCD_EINT, irq_mask); + snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4, + WM8962_MICDET_ENA, enable); + + /* Send an initial empty report */ + snd_soc_jack_report(wm8962->jack, 0, + SND_JACK_MICROPHONE | SND_JACK_BTN_0); + + return 0; +} +EXPORT_SYMBOL_GPL(wm8962_mic_detect); + #ifdef CONFIG_PM static int wm8962_resume(struct snd_soc_codec *codec) { @@ -1773,6 +1855,7 @@ static int wm8962_probe(struct snd_soc_codec *codec) int i, trigger, irq_pol; wm8962->codec = codec; + INIT_DELAYED_WORK(&wm8962->mic_work, wm8962_mic_work); codec->cache_sync = 1; codec->idle_bias_off = 1; @@ -1946,6 +2029,8 @@ static int wm8962_remove(struct snd_soc_codec *codec) if (i2c->irq) free_irq(i2c->irq, codec); + cancel_delayed_work_sync(&wm8962->mic_work); + wm8962_free_gpio(codec); wm8962_free_beep(codec); for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++) diff --git a/sound/soc/codecs/wm8962.h b/sound/soc/codecs/wm8962.h index fce1199..2af6c93 100644 --- a/sound/soc/codecs/wm8962.h +++ b/sound/soc/codecs/wm8962.h @@ -14,6 +14,7 @@ #define _WM8962_H #include +#include #define WM8962_SYSCLK_MCLK 1 #define WM8962_SYSCLK_FLL 2 @@ -3785,4 +3786,6 @@ struct wm8962_reg_access { extern const struct wm8962_reg_access wm8962_reg_access[WM8962_MAX_REGISTER + 1]; +int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack); + #endif -- cgit v0.10.2