From 3d73998558beac1e56efaaf7c5bf3469ee4c6ba2 Mon Sep 17 00:00:00 2001 From: Jaecheol Lee Date: Wed, 16 Mar 2011 07:28:23 +0900 Subject: ARM: EXYNOS4: CPUIDLE Support This patch supports cpuidle framework for EXYNOS4210. Currently, Only one idle state is possible to use, but more idle states can be added following by this patch. Signed-off-by: Jaecheol Lee Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 9be104f..de197d6 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c new file mode 100644 index 0000000..bf7e96f --- /dev/null +++ b/arch/arm/mach-exynos4/cpuidle.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/mach-exynos4/cpuidle.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state); + +static struct cpuidle_state exynos4_cpuidle_set[] = { + [0] = { + .enter = exynos4_enter_idle, + .exit_latency = 1, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IDLE", + .desc = "ARM clock gating(WFI)", + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); + +static struct cpuidle_driver exynos4_idle_driver = { + .name = "exynos4_idle", + .owner = THIS_MODULE, +}; + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + cpu_do_idle(); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + return idle_time; +} + +static int __init exynos4_init_cpuidle(void) +{ + int i, max_cpuidle_state, cpu_id; + struct cpuidle_device *device; + + cpuidle_register_driver(&exynos4_idle_driver); + + for_each_cpu(cpu_id, cpu_online_mask) { + device = &per_cpu(exynos4_cpuidle_device, cpu_id); + device->cpu = cpu_id; + + device->state_count = (sizeof(exynos4_cpuidle_set) / + sizeof(struct cpuidle_state)); + + max_cpuidle_state = device->state_count; + + for (i = 0; i < max_cpuidle_state; i++) { + memcpy(&device->states[i], &exynos4_cpuidle_set[i], + sizeof(struct cpuidle_state)); + } + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "CPUidle register device failed\n,"); + return -EIO; + } + } + return 0; +} +device_initcall(exynos4_init_cpuidle); -- cgit v0.10.2 From 3260ecd859ba842c709f205cbc01408b826bb387 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Wed, 23 Mar 2011 15:25:14 +0900 Subject: ARM: EXYNOS4: Add Atmel mXT touchscreen device to the NURI board This patch is to support Atmel mXT touchscreen device to the NURI board. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index e849f67..11b57a4 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -169,8 +169,10 @@ config MACH_NURI select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 + select S3C_DEV_I2C3 select S3C_DEV_I2C5 select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI select SAMSUNG_DEV_PWM diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index b79ad01..d13c5e8 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -30,6 +31,8 @@ #include #include #include +#include +#include #include @@ -257,6 +260,88 @@ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +/* TSP */ +static u8 mxt_init_vals[] = { + /* MXT_GEN_COMMAND(6) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_GEN_POWER(7) */ + 0x20, 0xff, 0x32, + /* MXT_GEN_ACQUIRE(8) */ + 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, + /* MXT_TOUCH_MULTI(9) */ + 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* MXT_TOUCH_KEYARRAY(15) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, + /* MXT_SPT_GPIOPWM(19) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_GRIPFACE(20) */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, + 0x0f, 0x0a, + /* MXT_PROCG_NOISE(22) */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, + 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, + /* MXT_TOUCH_PROXIMITY(23) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_ONETOUCH(24) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_SELFTEST(25) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_TWOTOUCH(27) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_CTECONFIG(28) */ + 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, +}; + +static struct mxt_platform_data mxt_platform_data = { + .config = mxt_init_vals, + .config_length = ARRAY_SIZE(mxt_init_vals), + + .x_line = 18, + .y_line = 11, + .x_size = 1024, + .y_size = 600, + .blen = 0x1, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = MXT_DIAGONAL_COUNTER, + .irqflags = IRQF_TRIGGER_FALLING, +}; + +static struct s3c2410_platform_i2c i2c3_data __initdata = { + .flags = 0, + .bus_num = 3, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c3_devs[] __initdata = { + { + I2C_BOARD_INFO("atmel_mxt_ts", 0x4a), + .platform_data = &mxt_platform_data, + .irq = IRQ_EINT(4), + }, +}; + +static void __init nuri_tsp_init(void) +{ + int gpio; + + /* TOUCH_INT: XEINT_4 */ + gpio = EXYNOS4_GPX0(4); + gpio_request(gpio, "TOUCH_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); +} + /* GPIO I2C 5 (PMIC) */ static struct i2c_board_info i2c5_devs[] __initdata = { /* max8997, To be updated */ @@ -270,6 +355,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_hsmmc3, &s3c_device_wdt, &s3c_device_timer[0], + &s3c_device_i2c3, /* NURI Devices */ &nuri_gpio_keys, @@ -287,8 +373,11 @@ static void __init nuri_map_io(void) static void __init nuri_machine_init(void) { nuri_sdhci_init(); + nuri_tsp_init(); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + s3c_i2c3_set_platdata(&i2c3_data); + i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); /* Last */ -- cgit v0.10.2 From 14587b8d4be652fccc8e0e82ae9baa4365b06d9b Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 25 Mar 2011 10:30:08 +0900 Subject: ARM: exynos4_defconfig: Update for adding machines This patch adds MACH_ARMLEX4210 and MACH_NURI in exynos4_defconfig. Signed-off-by: Kukjin Kim diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index 2ffba24..da53ff3 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -8,7 +8,9 @@ CONFIG_ARCH_EXYNOS4=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_SMDKV310=y +CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_MACH_NURI=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y -- cgit v0.10.2 From 3185847957d4834d1b30b253b1c71bb05bad7265 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Fri, 6 May 2011 09:37:17 +0900 Subject: ARM: S3C64XX: Remove gpio-bank-X header files The gpio-bank-X header files of S3C64XX have definitions which can be substituted by other common GPIO API. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 405e621..82db072 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -16,7 +16,6 @@ #include #include -#include #include #include @@ -40,23 +39,15 @@ static char *spi_src_clks[] = { */ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0); - s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO); - s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO); - s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(0); break; case 1: - s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1); - s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1); - s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1); - s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(4); break; default: @@ -64,6 +55,9 @@ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h deleted file mode 100644 index 34212e1..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank A register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00) -#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04) -#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08) -#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c) -#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10) - -#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0) -#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0) - -#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4) -#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4) - -#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8) -#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8) - -#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12) -#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12) - -#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16) -#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16) - -#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20) -#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20) - -#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24) -#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24) - -#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28) -#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h deleted file mode 100644 index 7232c03..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank B register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00) -#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04) -#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08) -#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c) -#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10) - -#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0) -#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0) -#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0) -#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0) -#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0) - -#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4) -#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4) -#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4) -#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4) -#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4) - -#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8) -#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8) -#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8) -#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8) -#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8) -#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8) - -#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12) -#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12) -#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12) -#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12) -#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12) - -#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16) -#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16) -#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16) -#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16) - -#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20) -#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20) - -#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24) -#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h deleted file mode 100644 index db189ab..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank C register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00) -#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04) -#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08) -#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c) -#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10) - -#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0) -#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0) - -#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4) -#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4) - -#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8) -#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8) - -#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12) -#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12) - -#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) -#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) -#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) -#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) - -#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) -#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) -#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) -#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) - -#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) -#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) - -#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) -#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) -#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h deleted file mode 100644 index 1a01cee..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank D register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00) -#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04) -#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08) -#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c) -#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10) - -#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0) -#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0) -#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0) -#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0) - -#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4) -#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4) -#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4) -#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4) - -#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8) -#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8) -#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8) -#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8) - -#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12) -#define S3C64XX_GPD3_I2S0_DI (0x03 << 12) -#define S3C64XX_GPD3_AC97_SDI (0x04 << 12) -#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12) - -#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16) -#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16) -#define S3C64XX_GPD4_AC97_SDO (0x04 << 16) -#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h deleted file mode 100644 index f057adb..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank E register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00) -#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04) -#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08) -#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c) -#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10) - -#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0) -#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0) -#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0) - -#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4) -#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4) -#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4) - -#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8) -#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8) -#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8) - -#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12) -#define S3C64XX_GPE3_I2S1_DI (0x03 << 12) -#define S3C64XX_GPE3_AC97_SDI (0x04 << 12) - -#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16) -#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16) -#define S3C64XX_GPE4_AC97_SDO (0x04 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h deleted file mode 100644 index 62ab8f5..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h +++ /dev/null @@ -1,71 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank F register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00) -#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04) -#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08) -#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c) -#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10) - -#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0) -#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0) - -#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2) -#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2) - -#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4) -#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4) - -#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6) -#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6) - -#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8) -#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8) - -#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10) -#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10) - -#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12) -#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12) - -#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14) -#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14) - -#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16) -#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16) - -#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18) -#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18) - -#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20) -#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20) - -#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22) -#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22) - -#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24) -#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24) - -#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26) -#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26) - -#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28) -#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28) - -#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h deleted file mode 100644 index b94954a..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank G register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00) -#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04) -#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08) -#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c) -#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10) - -#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0) -#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0) - -#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4) -#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4) - -#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8) -#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8) - -#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12) -#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12) - -#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16) -#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16) - -#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20) -#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h deleted file mode 100644 index 5d75aaa..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h +++ /dev/null @@ -1,74 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank H register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00) -#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04) -#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08) -#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c) -#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10) -#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14) - -#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0) -#define S3C64XX_GPH0_KP_COL0 (0x04 << 0) -#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0) - -#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4) -#define S3C64XX_GPH1_KP_COL1 (0x04 << 4) -#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4) - -#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8) -#define S3C64XX_GPH2_KP_COL2 (0x04 << 8) -#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8) - -#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12) -#define S3C64XX_GPH3_KP_COL3 (0x04 << 12) -#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12) - -#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16) -#define S3C64XX_GPH4_KP_COL4 (0x04 << 16) -#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16) - -#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20) -#define S3C64XX_GPH5_KP_COL5 (0x04 << 20) -#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20) - -#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24) -#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24) -#define S3C64XX_GPH6_KP_COL6 (0x04 << 24) -#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24) -#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24) -#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24) - -#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28) -#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28) -#define S3C64XX_GPH7_KP_COL7 (0x04 << 28) -#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28) -#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) -#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) - -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) - -#define S3C64XX_GPH9_OUTPUT (0x01 << 4) -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h deleted file mode 100644 index 4ceaa60..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank I register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00) -#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04) -#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08) -#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c) -#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10) - -#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPI0_VD0 (0x02 << 0) -#define S3C64XX_GPI1_VD1 (0x02 << 2) -#define S3C64XX_GPI2_VD2 (0x02 << 4) -#define S3C64XX_GPI3_VD3 (0x02 << 6) -#define S3C64XX_GPI4_VD4 (0x02 << 8) -#define S3C64XX_GPI5_VD5 (0x02 << 10) -#define S3C64XX_GPI6_VD6 (0x02 << 12) -#define S3C64XX_GPI7_VD7 (0x02 << 14) -#define S3C64XX_GPI8_VD8 (0x02 << 16) -#define S3C64XX_GPI9_VD9 (0x02 << 18) -#define S3C64XX_GPI10_VD10 (0x02 << 20) -#define S3C64XX_GPI11_VD11 (0x02 << 22) -#define S3C64XX_GPI12_VD12 (0x02 << 24) -#define S3C64XX_GPI13_VD13 (0x02 << 26) -#define S3C64XX_GPI14_VD14 (0x02 << 28) -#define S3C64XX_GPI15_VD15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h deleted file mode 100644 index 6f25cd0..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank J register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00) -#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04) -#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08) -#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c) -#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10) - -#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPJ0_VD16 (0x02 << 0) -#define S3C64XX_GPJ1_VD17 (0x02 << 2) -#define S3C64XX_GPJ2_VD18 (0x02 << 4) -#define S3C64XX_GPJ3_VD19 (0x02 << 6) -#define S3C64XX_GPJ4_VD20 (0x02 << 8) -#define S3C64XX_GPJ5_VD21 (0x02 << 10) -#define S3C64XX_GPJ6_VD22 (0x02 << 12) -#define S3C64XX_GPJ7_VD23 (0x02 << 14) -#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16) -#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18) -#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20) -#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h deleted file mode 100644 index d0aeda1..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank N register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) -#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) -#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08) - -#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPN0_EINT0 (0x02 << 0) -#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0) - -#define S3C64XX_GPN1_EINT1 (0x02 << 2) -#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2) - -#define S3C64XX_GPN2_EINT2 (0x02 << 4) -#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4) - -#define S3C64XX_GPN3_EINT3 (0x02 << 6) -#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6) - -#define S3C64XX_GPN4_EINT4 (0x02 << 8) -#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8) - -#define S3C64XX_GPN5_EINT5 (0x02 << 10) -#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10) - -#define S3C64XX_GPN6_EINT6 (0x02 << 12) -#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12) - -#define S3C64XX_GPN7_EINT7 (0x02 << 14) -#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14) - -#define S3C64XX_GPN8_EINT8 (0x02 << 16) -#define S3C64XX_GPN9_EINT9 (0x02 << 18) -#define S3C64XX_GPN10_EINT10 (0x02 << 20) -#define S3C64XX_GPN11_EINT11 (0x02 << 22) -#define S3C64XX_GPN12_EINT12 (0x02 << 24) -#define S3C64XX_GPN13_EINT13 (0x02 << 26) -#define S3C64XX_GPN14_EINT14 (0x02 << 28) -#define S3C64XX_GPN15_EINT15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h deleted file mode 100644 index 21868fa..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank O register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00) -#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04) -#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08) -#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c) -#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10) - -#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0) -#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0) - -#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2) -#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2) - -#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4) -#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4) - -#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6) -#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6) - -#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8) - -#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10) - -#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12) -#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12) - -#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14) -#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14) - -#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16) -#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16) - -#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18) -#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18) - -#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20) -#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20) - -#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22) -#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22) - -#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24) -#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24) - -#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26) -#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26) - -#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28) -#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28) - -#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30) -#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h deleted file mode 100644 index 46bcfb6..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h +++ /dev/null @@ -1,69 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank P register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00) -#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04) -#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08) -#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c) -#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10) - -#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0) -#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0) - -#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2) -#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2) - -#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4) -#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4) - -#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6) -#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6) - -#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8) -#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8) - -#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10) -#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10) - -#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12) -#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12) - -#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14) -#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14) - -#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16) -#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16) - -#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18) -#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18) - -#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20) -#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20) - -#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22) -#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22) - -#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24) -#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24) - -#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26) -#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26) - -#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28) -#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h deleted file mode 100644 index 1712223..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank Q register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00) -#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04) -#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08) -#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c) -#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10) - -#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0) -#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0) - -#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2) -#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2) - -#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4) - -#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6) - -#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8) - -#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10) - -#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12) - -#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14) -#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14) - -#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16) -#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16) - diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 686a4f2..2c0353a 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 79412f7..bc1c470 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -30,26 +30,18 @@ #include #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK -#include - void s3c_pm_debug_smdkled(u32 set, u32 clear) { unsigned long flags; - u32 reg; + int i; local_irq_save(flags); - reg = __raw_readl(S3C64XX_GPNCON); - reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | - S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)); - reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | - S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15); - __raw_writel(reg, S3C64XX_GPNCON); - - reg = __raw_readl(S3C64XX_GPNDAT); - reg &= ~(clear << 12); - reg |= set << 12; - __raw_writel(reg, S3C64XX_GPNDAT); - + for (i = 0; i < 4; i++) { + if (clear & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 0); + if (set & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 1); + } local_irq_restore(flags); } #endif @@ -187,6 +179,18 @@ static int s3c64xx_pm_init(void) pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); + gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); + gpio_request(S3C64XX_GPN(14), "DEBUG_LED2"); + gpio_request(S3C64XX_GPN(15), "DEBUG_LED3"); + gpio_direction_output(S3C64XX_GPN(12), 0); + gpio_direction_output(S3C64XX_GPN(13), 0); + gpio_direction_output(S3C64XX_GPN(14), 0); + gpio_direction_output(S3C64XX_GPN(15), 0); +#endif + return 0; } diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index 406192a..241af94 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include #include #include void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0); - s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0); - s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index 1ee62c9..3d13a96 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include #include #include void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1); - s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1); - s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2, + S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index afe5a76..1f87732 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -20,7 +20,6 @@ #define S3C64XX_VA_GPIO (0x0) #include -#include #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) @@ -68,6 +67,13 @@ ENTRY(s3c_cpu_resume) ldr r2, =LL_UART /* for debug */ #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + +#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) +#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) + +#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + /* Initialise the GPIO state if we are debugging via the SMDK LEDs, * as the uboot version supplied resets these to inputs during the * resume checks. -- cgit v0.10.2 From 5a9f68fd2608384e09e18767ebc253d7aee86b34 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 6 Apr 2011 17:24:31 +0000 Subject: DA8xx: kill duplicate #define DA8XX_GPIO_BASE DA8XX_GPIO_BASE is #define'd in both and devices-da8xx.c; moreover, it's not even used in the latter file... Signed-off-by: Sergei Shtylyov diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 58a02dc..feffafa 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -36,7 +36,6 @@ #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 #define DA8XX_EMAC_MDIO_BASE 0x01e24000 -#define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 -- cgit v0.10.2 From e0c199d0989e2f9fa2683e817624779f55abfa7f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 6 Apr 2011 17:26:06 +0000 Subject: DA8xx: kill duplicate #define DA8XX_PLL1_BASE Commit 044ca01521d077a35b46a445b02b93f413109a4b (davinci: da850/omap-l138: add support for SoC suspend) introduced DA8XX_PLL1_BASE despite PLL1 exists only on DA850/OMAP-L138 and da850.c even already #define'd DA850_PLL1_BASE. Kill the duplicate macro, renaming an existing reference to it... Signed-off-by: Sergei Shtylyov diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b95b919..133aac4 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1055,7 +1055,7 @@ int da850_register_pm(struct platform_device *pdev) if (!pdata->cpupll_reg_base) return -ENOMEM; - pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K); + pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K); if (!pdata->ddrpll_reg_base) { ret = -ENOMEM; goto no_ddrpll_mem; diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index e4fc1af..2897014 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -65,7 +65,6 @@ extern unsigned int da850_max_speed; #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 #define DA8XX_LCD_CNTRL_BASE 0x01e13000 -#define DA8XX_PLL1_BASE 0x01e1a000 #define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 -- cgit v0.10.2 From 8ac764e3479f6057c1cc85bd960dd2aa0fb82fea Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 6 Apr 2011 17:29:24 +0000 Subject: DA8xx: move base address #define's to their proper place Move DA8XX_MMCSD0_BASE, DA8XX_LCD_CNTRL_BASE, and DA8XX_DDR2_CTL_BASE from to devices-da8xx.c as the latter file is the only place where these macros are used. While at it, restore sorting the base address macros by address value in devices-da8xx.c... Signed-off-by: Sergei Shtylyov diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index feffafa..4e66881 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,22 +24,25 @@ #include "clock.h" #define DA8XX_TPCC_BASE 0x01c00000 -#define DA850_MMCSD1_BASE 0x01e1b000 -#define DA850_TPCC1_BASE 0x01e30000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 -#define DA850_TPTC2_BASE 0x01e38000 #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 -#define DA8XX_RTC_BASE 0x01C23000 +#define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_MMCSD0_BASE 0x01c40000 +#define DA8XX_SPI0_BASE 0x01c41000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA850_MMCSD1_BASE 0x01e1b000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 #define DA8XX_EMAC_MDIO_BASE 0x01e24000 #define DA8XX_I2C1_BASE 0x01e28000 -#define DA8XX_SPI0_BASE 0x01c41000 -#define DA830_SPI1_BASE 0x01e12000 +#define DA850_TPCC1_BASE 0x01e30000 +#define DA850_TPTC2_BASE 0x01e38000 #define DA850_SPI1_BASE 0x01f0e000 +#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 2897014..ad64da7 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -64,12 +64,9 @@ extern unsigned int da850_max_speed; #define DA8XX_TIMER64P1_BASE 0x01c21000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 -#define DA8XX_LCD_CNTRL_BASE 0x01e13000 -#define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 -#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); -- cgit v0.10.2 From 85f60ae4ee817174b0f78928bc7066f28c3551ab Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 29 Apr 2011 00:18:16 -0600 Subject: dt/flattree: explicitly pass command line pointer to early_init_dt_scan_chosen This patch drops the reference to a global 'cmd_line' variable from early_init_dt_scan_chosen, and instead passes the pointer to the command line string via the *data argument. Each architecture does something slightly different with the initial command line, so it makes sense for the architecture to be able to specify the variable name. Signed-off-by: Grant Likely diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 00ee90f..b15cc21 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -130,7 +130,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h index f29b862..857d9b7 100644 --- a/arch/mips/include/asm/prom.h +++ b/arch/mips/include/asm/prom.h @@ -14,9 +14,6 @@ #ifdef CONFIG_OF #include -/* which is compatible with the flattened device tree (FDT) */ -#define cmd_line arcs_cmdline - extern int early_init_dt_scan_memory_arch(unsigned long node, const char *uname, int depth, void *data); diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index a19811e9..5b7eade 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -83,7 +83,8 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline); + /* Scan memory nodes */ of_scan_flat_dt(early_init_dt_scan_root, NULL); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index e74fa12..c173bee 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -691,7 +691,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen_ppc, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 8b63a69..65200af 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -670,7 +670,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - if (depth != 1 || + if (depth != 1 || !data || (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) return 0; @@ -679,16 +679,16 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, /* Retrieve command line */ p = of_get_flat_dt_prop(node, "bootargs", &l); if (p != NULL && l > 0) - strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); + strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); #ifdef CONFIG_CMDLINE #ifndef CONFIG_CMDLINE_FORCE if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) #endif - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); + strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); #endif /* CONFIG_CMDLINE */ - pr_debug("Command line is: %s\n", cmd_line); + pr_debug("Command line is: %s\n", (char*)data); /* break now */ return 1; -- cgit v0.10.2 -- cgit v0.10.2 From 4c2896e88d976d0e5b2213c64cde885f5677fa2b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:20 -0600 Subject: arm/dt: Make __vet_atags also accept a dtb image The dtb is passed to the kernel via register r2, which is the same method that is used to pass an atags pointer. This patch modifies __vet_atags to not clear r2 when it encounters a dtb image. v2: fixed bugs pointed out by Nicolas Pitre Tested-by: Tony Lindgren Signed-off-by: Grant Likely diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index c84b57d..854bd22 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -15,6 +15,12 @@ #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) +#ifdef CONFIG_CPU_BIG_ENDIAN +#define OF_DT_MAGIC 0xd00dfeed +#else +#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */ +#endif + /* * Exception handling. Something went wrong and we can't proceed. We * ought to tell the user, but since we don't have any guarantee that @@ -28,20 +34,26 @@ /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and - * that the ATAG_CORE marker is first and present. Future revisions + * that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE + * is selected, then it will also accept a dtb pointer. Future revisions * of this function may be more lenient with the physical address and * may also be able to move the ATAGS block if necessary. * * Returns: - * r2 either valid atags pointer, or zero + * r2 either valid atags pointer, valid dtb pointer, or zero * r5, r6 corrupted */ __vet_atags: tst r2, #0x3 @ aligned? bne 1f - ldr r5, [r2, #0] @ is first tag ATAG_CORE? - cmp r5, #ATAG_CORE_SIZE + ldr r5, [r2, #0] +#ifdef CONFIG_OF_FLATTREE + ldr r6, =OF_DT_MAGIC @ is it a DTB? + cmp r5, r6 + beq 2f +#endif + cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE? cmpne r5, #ATAG_CORE_SIZE_EMPTY bne 1f ldr r5, [r2, #4] @@ -49,7 +61,7 @@ __vet_atags: cmp r5, r6 bne 1f - mov pc, lr @ atag pointer is ok +2: mov pc, lr @ atag/dtb pointer is ok 1: mov r2, #0 mov pc, lr @@ -61,7 +73,7 @@ ENDPROC(__vet_atags) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags/dtb pointer * r9 = processor ID */ __INIT diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c9173cf..a5e5c5b 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -59,7 +59,7 @@ * * This is normally called from the decompressor code. The requirements * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, - * r1 = machine nr, r2 = atags pointer. + * r1 = machine nr, r2 = atags or dtb pointer. * * This code is mostly position independent, so if you link the kernel at * 0xc0008000, you call this at __pa(0xc0008000). @@ -91,7 +91,7 @@ ENTRY(stext) #endif /* - * r1 = machine no, r2 = atags, + * r1 = machine no, r2 = atags or dtb, * r8 = phys_offset, r9 = cpuid, r10 = procinfo */ bl __vet_atags @@ -339,7 +339,7 @@ __secondary_data: * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r4 = page table pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion @@ -376,7 +376,7 @@ ENDPROC(__enable_mmu) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion * -- cgit v0.10.2 From 9eb8f6743b076b67f00776cda4330c802e157b41 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:20 -0600 Subject: arm/dt: Allow CONFIG_OF on ARM Add some basic empty infrastructure for DT support on ARM. v5: - Fix off-by-one error in size calculation of initrd - Stop mucking with cmd_line, and load command line from dt into boot_command_line instead which matches the behaviour of ATAGS booting v3: - moved cmd_line export and initrd setup to this patch to make the series bisectable. - switched to alloc_bootmem_align() for allocation when unflattening the device tree. memblock_alloc() was not the right interface. Signed-off-by: Jeremy Kerr Tested-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Russell King Signed-off-by: Grant Likely diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 377a7a5..efc7f3c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1687,6 +1687,13 @@ endmenu menu "Boot options" +config USE_OF + bool "Flattened Device Tree support" + select OF + select OF_EARLY_FLATTREE + help + Include support for flattened device tree machine descriptions. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h new file mode 100644 index 0000000..8f1037f --- /dev/null +++ b/arch/arm/include/asm/prom.h @@ -0,0 +1,25 @@ +/* + * arch/arm/include/asm/prom.h + * + * Copyright (C) 2009 Canonical Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __ASMARM_PROM_H +#define __ASMARM_PROM_H + +#ifdef CONFIG_OF + +#include +#include + +static inline void irq_dispose_mapping(unsigned int virq) +{ + return; +} + +#endif /* CONFIG_OF */ +#endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 95176af..93b4702 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -217,6 +217,8 @@ extern struct meminfo meminfo; #define bank_phys_end(bank) ((bank)->start + (bank)->size) #define bank_phys_size(bank) (bank)->size +extern int arm_add_memory(phys_addr_t start, unsigned long size); + #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8d95446..908c78c 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o +obj-$(CONFIG_OF) += devtree.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o CFLAGS_swp_emulate.o := -Wa,-march=armv7-a diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c new file mode 100644 index 0000000..75e3df8 --- /dev/null +++ b/arch/arm/kernel/devtree.c @@ -0,0 +1,47 @@ +/* + * linux/arch/arm/kernel/devtree.c + * + * Copyright (C) 2009 Canonical Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + arm_add_memory(base, size); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return alloc_bootmem_align(size, align); +} + +/** + * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# + * + * Currently the mapping mechanism is trivial; simple flat hwirq numbers are + * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not + * supported. + */ +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + return intspec[0]; +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 006c1e8..109997e 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -466,7 +466,7 @@ static struct machine_desc * __init setup_machine(unsigned int nr) /* can't use cpu_relax() here as it may require MMU setup */; } -static int __init arm_add_memory(phys_addr_t start, unsigned long size) +int __init arm_add_memory(phys_addr_t start, unsigned long size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index e5f6fc4..26c4054 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -71,6 +72,14 @@ static int __init parse_tag_initrd2(const struct tag *tag) __tagtable(ATAG_INITRD2, parse_tag_initrd2); +#ifdef CONFIG_OF_FLATTREE +void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end) +{ + phys_initrd_start = start; + phys_initrd_size = end - start; +} +#endif /* CONFIG_OF_FLATTREE */ + /* * This keeps memory configuration data used by a couple memory * initialization functions, as well as show_mem() for the skipping -- cgit v0.10.2 From a73ddc61e8f14ddc7ab6e6a11dc882ef6a697114 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 11 May 2011 16:27:51 +0900 Subject: ARM: S5P6442: Removing ARCH_S5P6442 Signed-off-by: Kukjin Kim diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt index c3094ea..658abb2 100644 --- a/Documentation/arm/Samsung/Overview.txt +++ b/Documentation/arm/Samsung/Overview.txt @@ -14,7 +14,6 @@ Introduction - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list - S3C64XX: S3C6400 and S3C6410 - S5P6440 - - S5P6442 - S5PC100 - S5PC110 / S5PV210 @@ -36,7 +35,6 @@ Configuration unifying all the SoCs into one kernel. s5p6440_defconfig - S5P6440 specific default configuration - s5p6442_defconfig - S5P6442 specific default configuration s5pc100_defconfig - S5PC100 specific default configuration s5pc110_defconfig - S5PC110 specific default configuration s5pv210_defconfig - S5PV210 specific default configuration diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 377a7a5..e81c72c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -736,16 +736,6 @@ config ARCH_S5P64X0 Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. -config ARCH_S5P6442 - bool "Samsung S5P6442" - select CPU_V6 - select GENERIC_GPIO - select HAVE_CLK - select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_WATCHDOG if WATCHDOG - help - Samsung S5P6442 CPU based systems - config ARCH_S5PC100 bool "Samsung S5PC100" select GENERIC_GPIO @@ -995,8 +985,6 @@ endif source "arch/arm/mach-s5p64x0/Kconfig" -source "arch/arm/mach-s5p6442/Kconfig" - source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" @@ -1424,7 +1412,7 @@ source kernel/Kconfig.preempt config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ - ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4 + ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE @@ -2010,7 +1998,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5P64X0 && !ARCH_S5P6442 + depends on !ARCH_S5P64X0 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c7d321a..c17304b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -178,7 +178,6 @@ machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 -machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_EXYNOS4) := exynos4 diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index ea5ee4d..4b71766 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -7,7 +7,7 @@ config ARM_VIC config ARM_VIC_NR int default 4 if ARCH_S5PV210 - default 3 if ARCH_S5P6442 || ARCH_S5PC100 + default 3 if ARCH_S5PC100 default 2 depends on ARM_VIC help diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig deleted file mode 100644 index 0e92a78..0000000 --- a/arch/arm/configs/s5p6442_defconfig +++ /dev/null @@ -1,65 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6442=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDK6442=y -CONFIG_CPU_32v6K=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_FPE_NWFPE=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRC_CCITT=y diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig deleted file mode 100644 index 33569e4..0000000 --- a/arch/arm/mach-s5p6442/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6442/Kconfig -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -# Configuration options for the S5P6442 - -if ARCH_S5P6442 - -config CPU_S5P6442 - bool - select S3C_PL330_DMA - help - Enable S5P6442 CPU support - -config MACH_SMDK6442 - bool "SMDK6442" - select CPU_S5P6442 - select S3C_DEV_WDT - help - Machine support for Samsung SMDK6442 - -endif diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile deleted file mode 100644 index 90a3d83..0000000 --- a/arch/arm/mach-s5p6442/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# arch/arm/mach-s5p6442/Makefile -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6442 system - -obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o dma.o -obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot deleted file mode 100644 index ff90aa1..0000000 --- a/arch/arm/mach-s5p6442/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c deleted file mode 100644 index fbbc7be..0000000 --- a/arch/arm/mach-s5p6442/clock.c +++ /dev/null @@ -1,420 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, -}; - -/* Possible clock sources for ARM Mux */ -static struct clk *clk_src_arm_list[] = { - [1] = &clk_mout_apll.clk, - [2] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clk_src_arm = { - .sources = clk_src_arm_list, - .nr_sources = ARRAY_SIZE(clk_src_arm_list), -}; - -static struct clksrc_clk clk_mout_arm = { - .clk = { - .name = "mout_arm", - .id = -1, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, -}; - -static struct clk clk_dout_a2m = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, -}; - -/* Possible clock sources for D0 Mux */ -static struct clk *clk_src_d0_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d0 = { - .sources = clk_src_d0_list, - .nr_sources = ARRAY_SIZE(clk_src_d0_list), -}; - -static struct clksrc_clk clk_mout_d0 = { - .clk = { - .name = "mout_d0", - .id = -1, - }, - .sources = &clk_src_d0, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 }, -}; - -static struct clk clk_dout_apll = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, -}; - -/* Possible clock sources for D0SYNC Mux */ -static struct clk *clk_src_d0sync_list[] = { - [1] = &clk_mout_d0.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d0sync = { - .sources = clk_src_d0sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d0sync_list), -}; - -static struct clksrc_clk clk_mout_d0sync = { - .clk = { - .name = "mout_d0sync", - .id = -1, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, -}; - -/* Possible clock sources for D1 Mux */ -static struct clk *clk_src_d1_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d1 = { - .sources = clk_src_d1_list, - .nr_sources = ARRAY_SIZE(clk_src_d1_list), -}; - -static struct clksrc_clk clk_mout_d1 = { - .clk = { - .name = "mout_d1", - .id = -1, - }, - .sources = &clk_src_d1, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 }, -}; - -/* Possible clock sources for D1SYNC Mux */ -static struct clk *clk_src_d1sync_list[] = { - [1] = &clk_mout_d1.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d1sync = { - .sources = clk_src_d1sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d1sync_list), -}; - -static struct clksrc_clk clk_mout_d1sync = { - .clk = { - .name = "mout_d1sync", - .id = -1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, -}; - -static struct clk clk_hclkd0 = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, -}; - -static struct clk clk_hclkd1 = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, -}; - -static struct clk clk_pclkd0 = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, -}; - -static struct clk clk_pclkd1 = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, -}; - -int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); -} - -int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); -} - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, - }, { - .clk = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 }, - }, { - .clk = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, - }, { - .clk = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, - } -}; - -/* Clock initialisation code */ -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_mpll, - &clk_mout_epll, - &clk_mout_arm, - &clk_mout_d0, - &clk_mout_d0sync, - &clk_mout_d1, - &clk_mout_d1sync, -}; - -void __init_or_cpufreq s5p6442_setup_clocks(void) -{ - struct clk *pclkd0_clk; - struct clk *pclkd1_clk; - - unsigned long xtal; - unsigned long arm; - unsigned long hclkd0 = 0; - unsigned long hclkd1 = 0; - unsigned long pclkd0 = 0; - unsigned long pclkd1 = 0; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal = clk_get_rate(&clk_xtal); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); - - printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld", - apll, mpll, epll); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); - - arm = clk_get_rate(&clk_dout_apll); - hclkd0 = clk_get_rate(&clk_hclkd0); - hclkd1 = clk_get_rate(&clk_hclkd1); - - pclkd0_clk = clk_get(NULL, "pclkd0"); - BUG_ON(IS_ERR(pclkd0_clk)); - - pclkd0 = clk_get_rate(pclkd0_clk); - clk_put(pclkd0_clk); - - pclkd1_clk = clk_get(NULL, "pclkd1"); - BUG_ON(IS_ERR(pclkd1_clk)); - - pclkd1 = clk_get_rate(pclkd1_clk); - clk_put(pclkd1_clk); - - printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n", - hclkd0, hclkd1, pclkd0, pclkd1); - - /* For backward compatibility */ - clk_f.rate = arm; - clk_h.rate = hclkd1; - clk_p.rate = pclkd1; - - clk_pclkd0.rate = pclkd0; - clk_pclkd1.rate = pclkd1; -} - -static struct clk init_clocks_off[] = { - { - .name = "pdma", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, -}; - -static struct clk init_clocks[] = { - { - .name = "systimer", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<17), - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<18), - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<19), - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<23), - }, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, - &clk_mout_epll.clk, - &clk_mout_d0.clk, - &clk_mout_d0sync.clk, - &clk_mout_d1.clk, - &clk_mout_d1sync.clk, - &clk_hclkd0, - &clk_pclkd0, - &clk_hclkd1, - &clk_pclkd1, -}; - -void __init s5p6442_register_clocks(void) -{ - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c deleted file mode 100644 index 842af86..0000000 --- a/arch/arm/mach-s5p6442/cpu.c +++ /dev/null @@ -1,143 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -/* Initial IO mappings */ - -static struct map_desc s5p6442_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P6442_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P6442_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P6442_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P6442_PA_VIC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - } -}; - -static void s5p6442_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - -/* - * s5p6442_map_io - * - * register the standard cpu IO areas - */ - -void __init s5p6442_map_io(void) -{ - iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc)); -} - -void __init s5p6442_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6442_register_clocks(); - s5p6442_setup_clocks(); -} - -void __init s5p6442_init_irq(void) -{ - /* S5P6442 supports 3 VIC */ - u32 vic[3]; - - /* VIC0, VIC1, and VIC2: some interrupt reserved */ - vic[0] = 0x7fefffff; - vic[1] = 0X7f389c81; - vic[2] = 0X1bbbcfff; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6442_sysclass = { - .name = "s5p6442-core", -}; - -static struct sys_device s5p6442_sysdev = { - .cls = &s5p6442_sysclass, -}; - -static int __init s5p6442_core_init(void) -{ - return sysdev_class_register(&s5p6442_sysclass); -} - -core_initcall(s5p6442_core_init); - -int __init s5p6442_init(void) -{ - printk(KERN_INFO "S5P6442: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6442_idle; - - return sysdev_register(&s5p6442_sysdev); -} diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c deleted file mode 100644 index 8719dc4..0000000 --- a/arch/arm/mach-s5p6442/dev-audio.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include - -static int s5p6442_cfg_i2s(struct platform_device *pdev) -{ - unsigned int base; - - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 1: - base = S5P6442_GPC1(0); - break; - - case 0: - base = S5P6442_GPC0(0); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2)); - return 0; -} - -static const char *rclksrc_v35[] = { - [0] = "busclk", - [1] = "i2sclk", -}; - -static struct s3c_audio_pdata i2sv35_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc_v35, - }, - }, -}; - -static struct resource s5p6442_iis0_resource[] = { - [0] = { - .start = S5P6442_PA_I2S0, - .end = S5P6442_PA_I2S0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_iis0_resource), - .resource = s5p6442_iis0_resource, - .dev = { - .platform_data = &i2sv35_pdata, - }, -}; - -static const char *rclksrc_v3[] = { - [0] = "iis", - [1] = "sclk_audio", -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc_v3, - }, - }, -}; - -static struct resource s5p6442_iis1_resource[] = { - [0] = { - .start = S5P6442_PA_I2S1, - .end = S5P6442_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_iis1_resource), - .resource = s5p6442_iis1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5P6442_GPC0(0); - break; - - case 1: - base = S5P6442_GPC1(0); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)); - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6442_pcm_cfg_gpio, -}; - -static struct resource s5p6442_pcm0_resource[] = { - [0] = { - .start = S5P6442_PA_PCM0, - .end = S5P6442_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource), - .resource = s5p6442_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5p6442_pcm1_resource[] = { - [0] = { - .start = S5P6442_PA_PCM1, - .end = S5P6442_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource), - .resource = s5p6442_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c deleted file mode 100644 index cce8c24..0000000 --- a/arch/arm/mach-s5p6442/dev-spi.c +++ /dev/null @@ -1,121 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -static char *spi_src_clks[] = { - [S5P6442_SPI_SRCCLK_PCLK] = "pclk", - [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6442_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5P6442_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6442_spi0_resource[] = { - [0] = { - .start = S5P6442_PA_SPI, - .end = S5P6442_PA_SPI + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6442_spi0_pdata = { - .cfg_gpio = s5p6442_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6442_device_spi = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_spi0_resource), - .resource = s5p6442_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_spi0_pdata, - }, -}; - -void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6442_spi0_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c deleted file mode 100644 index 7dfb136..0000000 --- a/arch/arm/mach-s5p6442/dma.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -#include -#include - -#include - -static u64 dma_dmamask = DMA_BIT_MASK(32); - -static struct resource s5p6442_pdma_resource[] = { - [0] = { - .start = S5P6442_PA_PDMA, - .end = S5P6442_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA, - .end = IRQ_PDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c_pl330_platdata s5p6442_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_MAX, - [7] = DMACH_MAX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_PCM0_RX, - [21] = DMACH_PCM0_TX, - [22] = DMACH_PCM1_RX, - [23] = DMACH_PCM1_TX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MSM_REQ0, - [28] = DMACH_MSM_REQ1, - [29] = DMACH_MSM_REQ2, - [30] = DMACH_MSM_REQ3, - [31] = DMACH_MAX, - }, -}; - -static struct platform_device s5p6442_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6442_pdma_resource), - .resource = s5p6442_pdma_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_pdma_pdata, - }, -}; - -static struct platform_device *s5p6442_dmacs[] __initdata = { - &s5p6442_device_pdma, -}; - -static int __init s5p6442_dma_init(void) -{ - platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs)); - - return 0; -} -arch_initcall(s5p6442_dma_init); diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S deleted file mode 100644 index e2213205..0000000 --- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include -#include - - .macro addruart, rp, rv - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#define fifo_full fifo_full_s5pv210 -#define fifo_level fifo_level_s5pv210 - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include diff --git a/arch/arm/mach-s5p6442/include/mach/dma.h b/arch/arm/mach-s5p6442/include/mach/dma.h deleted file mode 100644 index 81209eb..0000000 --- a/arch/arm/mach-s5p6442/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common S3C DMA API driver for PL330 */ -#include - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S deleted file mode 100644 index 6d574ed..0000000 --- a/arch/arm/mach-s5p6442/include/mach/entry-macro.S +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Low-level IRQ helper macros for the Samsung S5P6442 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S5P_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h deleted file mode 100644 index b8715df..0000000 --- a/arch/arm/mach-s5p6442/include/mach/gpio.h +++ /dev/null @@ -1,123 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6442_GPIO_A0_NR (8) -#define S5P6442_GPIO_A1_NR (2) -#define S5P6442_GPIO_B_NR (4) -#define S5P6442_GPIO_C0_NR (5) -#define S5P6442_GPIO_C1_NR (5) -#define S5P6442_GPIO_D0_NR (2) -#define S5P6442_GPIO_D1_NR (6) -#define S5P6442_GPIO_E0_NR (8) -#define S5P6442_GPIO_E1_NR (5) -#define S5P6442_GPIO_F0_NR (8) -#define S5P6442_GPIO_F1_NR (8) -#define S5P6442_GPIO_F2_NR (8) -#define S5P6442_GPIO_F3_NR (6) -#define S5P6442_GPIO_G0_NR (7) -#define S5P6442_GPIO_G1_NR (7) -#define S5P6442_GPIO_G2_NR (7) -#define S5P6442_GPIO_H0_NR (8) -#define S5P6442_GPIO_H1_NR (8) -#define S5P6442_GPIO_H2_NR (8) -#define S5P6442_GPIO_H3_NR (8) -#define S5P6442_GPIO_J0_NR (8) -#define S5P6442_GPIO_J1_NR (6) -#define S5P6442_GPIO_J2_NR (8) -#define S5P6442_GPIO_J3_NR (8) -#define S5P6442_GPIO_J4_NR (5) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5P6442_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6442_GPIO_A0_START = 0, - S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0), - S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1), - S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B), - S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0), - S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1), - S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0), - S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1), - S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0), - S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1), - S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0), - S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1), - S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2), - S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3), - S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0), - S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1), - S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2), - S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0), - S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1), - S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2), - S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3), - S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0), - S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1), - S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2), - S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3), -}; - -/* S5P6442 GPIO number definitions. */ -#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr)) -#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr)) -#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr)) -#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr)) -#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr)) -#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr)) -#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr)) -#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr)) -#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr)) -#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr)) -#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr)) -#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr)) -#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr)) -#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr)) -#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr)) -#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr)) -#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr)) -#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr)) -#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr)) -#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr)) -#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr)) -#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr)) -#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr)) -#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr)) -#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr)) - -/* the end of the S5P6442 specific gpios */ -#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1) -#define S3C_GPIO_END S5P6442_GPIO_END - -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h deleted file mode 100644 index 8cd7b67..0000000 --- a/arch/arm/mach-s5p6442/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h deleted file mode 100644 index 5d2195a..0000000 --- a/arch/arm/mach-s5p6442/include/mach/io.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/io.h - * - * Copyright 2008-2010 Ben Dooks - * - * Default IO routines for S5P6442 - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h deleted file mode 100644 index 3fbc6c3..0000000 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include - -/* VIC0 */ -#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) -#define IRQ_BATF S5P_IRQ_VIC0(17) -#define IRQ_MDMA S5P_IRQ_VIC0(18) -#define IRQ_PDMA S5P_IRQ_VIC0(19) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) -#define IRQ_WDT S5P_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) -#define IRQ_GPIOINT S5P_IRQ_VIC0(30) - -/* VIC1 */ -#define IRQ_PMU S5P_IRQ_VIC1(0) -#define IRQ_ONENAND S5P_IRQ_VIC1(7) -#define IRQ_UART0 S5P_IRQ_VIC1(10) -#define IRQ_UART1 S5P_IRQ_VIC1(11) -#define IRQ_UART2 S5P_IRQ_VIC1(12) -#define IRQ_SPI0 S5P_IRQ_VIC1(15) -#define IRQ_IIC S5P_IRQ_VIC1(19) -#define IRQ_IIC1 S5P_IRQ_VIC1(20) -#define IRQ_IIC2 S5P_IRQ_VIC1(21) -#define IRQ_OTG S5P_IRQ_VIC1(24) -#define IRQ_MSM S5P_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_COMMRX S5P_IRQ_VIC1(29) -#define IRQ_COMMTX S5P_IRQ_VIC1(30) - -/* VIC2 */ -#define IRQ_LCD0 S5P_IRQ_VIC2(0) -#define IRQ_LCD1 S5P_IRQ_VIC2(1) -#define IRQ_LCD2 S5P_IRQ_VIC2(2) -#define IRQ_LCD3 S5P_IRQ_VIC2(3) -#define IRQ_ROTATOR S5P_IRQ_VIC2(4) -#define IRQ_FIMC0 S5P_IRQ_VIC2(5) -#define IRQ_FIMC1 S5P_IRQ_VIC2(6) -#define IRQ_FIMC2 S5P_IRQ_VIC2(7) -#define IRQ_JPEG S5P_IRQ_VIC2(8) -#define IRQ_3D S5P_IRQ_VIC2(10) -#define IRQ_Mixer S5P_IRQ_VIC2(11) -#define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) -#define IRQ_I2S0 S5P_IRQ_VIC2(16) -#define IRQ_I2S1 S5P_IRQ_VIC2(17) -#define IRQ_RP S5P_IRQ_VIC2(19) -#define IRQ_PCM0 S5P_IRQ_VIC2(20) -#define IRQ_PCM1 S5P_IRQ_VIC2(21) -#define IRQ_ADC S5P_IRQ_VIC2(23) -#define IRQ_PENDN S5P_IRQ_VIC2(24) -#define IRQ_KEYPAD S5P_IRQ_VIC2(25) -#define IRQ_SSS_INT S5P_IRQ_VIC2(27) -#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) -#define IRQ_VIC_END S5P_IRQ_VIC2(31) - -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) - -#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) -#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT(31) + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h deleted file mode 100644 index 058dab4..0000000 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ /dev/null @@ -1,76 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include -#include - -#define S5P6442_PA_SDRAM 0x20000000 - -#define S5P6442_PA_I2S0 0xC0B00000 -#define S5P6442_PA_I2S1 0xF2200000 - -#define S5P6442_PA_CHIPID 0xE0000000 - -#define S5P6442_PA_SYSCON 0xE0100000 - -#define S5P6442_PA_GPIO 0xE0200000 - -#define S5P6442_PA_VIC0 0xE4000000 -#define S5P6442_PA_VIC1 0xE4100000 -#define S5P6442_PA_VIC2 0xE4200000 - -#define S5P6442_PA_SROMC 0xE7000000 - -#define S5P6442_PA_MDMA 0xE8000000 -#define S5P6442_PA_PDMA 0xE9000000 - -#define S5P6442_PA_TIMER 0xEA000000 - -#define S5P6442_PA_SYSTIMER 0xEA100000 - -#define S5P6442_PA_WATCHDOG 0xEA200000 - -#define S5P6442_PA_UART 0xEC000000 - -#define S5P6442_PA_IIC0 0xEC100000 - -#define S5P6442_PA_SPI 0xEC300000 - -#define S5P6442_PA_PCM0 0xF2400000 -#define S5P6442_PA_PCM1 0xF2500000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_IIC S5P6442_PA_IIC0 -#define S3C_PA_WDT S5P6442_PA_WATCHDOG - -#define S5P_PA_CHIPID S5P6442_PA_CHIPID -#define S5P_PA_SDRAM S5P6442_PA_SDRAM -#define S5P_PA_SROMC S5P6442_PA_SROMC -#define S5P_PA_SYSCON S5P6442_PA_SYSCON -#define S5P_PA_TIMER S5P6442_PA_TIMER - -/* UART */ - -#define S3C_PA_UART S5P6442_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h deleted file mode 100644 index cfe259d..0000000 --- a/arch/arm/mach-s5p6442/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/memory.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h deleted file mode 100644 index 2724b37..0000000 --- a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6442 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h deleted file mode 100644 index 00828a3..0000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x08) -#define S5P_EPLL_LOCK S5P_CLKREG(0x10) -#define S5P_VPLL_LOCK S5P_CLKREG(0x20) - -#define S5P_APLL_CON S5P_CLKREG(0x100) -#define S5P_MPLL_CON S5P_CLKREG(0x108) -#define S5P_EPLL_CON S5P_CLKREG(0x110) -#define S5P_VPLL_CON S5P_CLKREG(0x120) - -#define S5P_CLK_SRC0 S5P_CLKREG(0x200) -#define S5P_CLK_SRC1 S5P_CLKREG(0x204) -#define S5P_CLK_SRC2 S5P_CLKREG(0x208) -#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) -#define S5P_CLK_SRC4 S5P_CLKREG(0x210) -#define S5P_CLK_SRC5 S5P_CLKREG(0x214) -#define S5P_CLK_SRC6 S5P_CLKREG(0x218) - -#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) -#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) - -#define S5P_CLK_DIV0 S5P_CLKREG(0x300) -#define S5P_CLK_DIV1 S5P_CLKREG(0x304) -#define S5P_CLK_DIV2 S5P_CLKREG(0x308) -#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) -#define S5P_CLK_DIV4 S5P_CLKREG(0x310) -#define S5P_CLK_DIV5 S5P_CLKREG(0x314) -#define S5P_CLK_DIV6 S5P_CLKREG(0x318) - -#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) -#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) - -/* CLK_OUT */ -#define S5P_CLK_OUT_SHIFT (12) -#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT) -#define S5P_CLK_OUT S5P_CLKREG(0x500) - -#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000) -#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004) - -#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100) -#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104) - -#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) - -/* Register Bit definition */ -#define S5P_EPLL_EN (1<<31) -#define S5P_EPLL_MASK 0xffffffff -#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_APLL_SHIFT (0) -#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) -#define S5P_CLKDIV0_A2M_SHIFT (4) -#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) -#define S5P_CLKDIV0_D0CLK_SHIFT (16) -#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT) -#define S5P_CLKDIV0_P0CLK_SHIFT (20) -#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT) -#define S5P_CLKDIV0_D1CLK_SHIFT (24) -#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT) -#define S5P_CLKDIV0_P1CLK_SHIFT (28) -#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT) - -/* Clock MUX status Registers */ -#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0) -#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4) -#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8) -#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12) -#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16) -#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20) -#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24) -#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT) -#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24) -#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT) -#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28) -#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h deleted file mode 100644 index 73782b5..0000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-irq.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include -#include - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h deleted file mode 100644 index 7fd8820..0000000 --- a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6442_PLAT_SPI_CLKS_H -#define __S5P6442_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6442_SPI_SRCCLK_PCLK 0 -#define S5P6442_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6442_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h deleted file mode 100644 index c30c1cc..0000000 --- a/arch/arm/mach-s5p6442/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -#include - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h deleted file mode 100644 index e1d4cab..0000000 --- a/arch/arm/mach-s5p6442/include/mach/tick.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/tick.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/tick.h - * - * S5P6442 - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h deleted file mode 100644 index ff8f2fc..0000000 --- a/arch/arm/mach-s5p6442/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks - * - * S5P6442 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h deleted file mode 100644 index 5ac7cbe..0000000 --- a/arch/arm/mach-s5p6442/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h deleted file mode 100644 index 4aa55e5..0000000 --- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S5P6442 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c deleted file mode 100644 index 1874bdb..0000000 --- a/arch/arm/mach-s5p6442/init.c +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/s5p6442-init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include -#include -#include - -static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6442_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c deleted file mode 100644 index eaf6b9c..0000000 --- a/arch/arm/mach-s5p6442/mach-smdk6442.c +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, -}; - -static struct platform_device *smdk6442_devices[] __initdata = { - &s3c_device_i2c0, - &samsung_asoc_dma, - &s5p6442_device_iis0, - &s3c_device_wdt, -}; - -static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static void __init smdk6442_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs)); -} - -static void __init smdk6442_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, smdk6442_i2c_devs0, - ARRAY_SIZE(smdk6442_i2c_devs0)); - platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices)); -} - -MACHINE_START(SMDK6442, "SMDK6442") - /* Maintainer: Kukjin Kim */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5p6442_init_irq, - .map_io = smdk6442_map_io, - .init_machine = smdk6442_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c deleted file mode 100644 index aad8565..0000000 --- a/arch/arm/mach-s5p6442/setup-i2c0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/setup-i2c0.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - -struct platform_device; /* don't need the contents */ - -#include -#include - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 8492297..5878bd9 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) default y select ARM_VIC if !ARCH_EXYNOS4 select ARM_GIC if ARCH_EXYNOS4 diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 5cf5e72..bbc2aa7 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -21,7 +21,6 @@ #include #include -#include #include #include #include @@ -30,7 +29,6 @@ /* table of supported CPUs */ static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6442[] = "S5P6442"; static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; @@ -46,14 +44,6 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p64x0_init, .name = name_s5p6440, }, { - .idcode = 0x36442000, - .idmask = 0xfffff000, - .map_io = s5p6442_map_io, - .init_clocks = s5p6442_init_clocks, - .init_uarts = s5p6442_init_uarts, - .init = s5p6442_init, - .name = name_s5p6442, - }, { .idcode = 0x36450000, .idmask = 0xfffff000, .map_io = s5p6450_map_io, diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h deleted file mode 100644 index 7b88013..0000000 --- a/arch/arm/plat-s5p/include/plat/s5p6442.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6442.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6442 related SoCs */ - -extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5p6442_register_clocks(void); -extern void s5p6442_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6442 - -extern int s5p6442_init(void); -extern void s5p6442_init_irq(void); -extern void s5p6442_map_io(void); -extern void s5p6442_init_clocks(int xtal); - -#define s5p6442_init_uarts s5p6442_common_init_uarts - -#else -#define s5p6442_init_clocks NULL -#define s5p6442_init_uarts NULL -#define s5p6442_map_io NULL -#define s5p6442_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index cedfff5..6ff205b 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -80,7 +80,6 @@ extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; extern struct sysdev_class s5p64x0_sysclass; -extern struct sysdev_class s5p6442_sysclass; extern struct sysdev_class s5pv210_sysclass; extern struct sysdev_class exynos4_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index dc6efd9..207e275 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -11,7 +11,7 @@ #include -/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */ +/* The S5PV210/S5PC110 implementations are as belows. */ .macro fifo_level_s5pv210 rd, rx ldr \rd, [ \rx, # S3C2410_UFSTAT ] diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index f0da6b7..d64adf1 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -110,12 +110,6 @@ extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; -extern struct platform_device s5p6442_device_pcm0; -extern struct platform_device s5p6442_device_pcm1; -extern struct platform_device s5p6442_device_iis0; -extern struct platform_device s5p6442_device_iis1; -extern struct platform_device s5p6442_device_spi; - extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 788837e9..c151c5f 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -194,7 +194,7 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 -/* Following are specific to S5PV210 and S5P6442 */ +/* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) #define S5PV210_UCON_PCLK (0<<10) #define S5PV210_UCON_UCLK (1<<10) diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index ff1a561..0ffe34a 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -69,6 +69,5 @@ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */ -- cgit v0.10.2 From 4b42120df72aeebd3967c952804cb1af53b91cc5 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 11 May 2011 16:28:45 +0900 Subject: ASoC: Remove to support sound for S5P6442 According to removing ARCH_S5P6442, we don't need to support sound for S5P6442. Acked-by: Jassi Brar Cc: Mark Brown Signed-off-by: Kukjin Kim diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index a3fdfb6..4b96b18 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -1,6 +1,6 @@ config SND_SOC_SAMSUNG tristate "ASoC support for Samsung" - depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_EXYNOS4 + depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4 select S3C64XX_DMA if ARCH_S3C64XX select S3C2410_DMA if ARCH_S3C2410 help @@ -55,7 +55,7 @@ config SND_SOC_SAMSUNG_JIVE_WM8750 config SND_SOC_SAMSUNG_SMDK_WM8580 tristate "SoC I2S Audio support for WM8580 on SMDK" - depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDK6442 || MACH_SMDKV210 || MACH_SMDKC110) + depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110) select SND_SOC_WM8580 select SND_SAMSUNG_I2S help diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c index 8aacf23..3d26f66 100644 --- a/sound/soc/samsung/smdk_wm8580.c +++ b/sound/soc/samsung/smdk_wm8580.c @@ -249,7 +249,7 @@ static int __init smdk_audio_init(void) int ret; char *str; - if (machine_is_smdkc100() || machine_is_smdk6442() + if (machine_is_smdkc100() || machine_is_smdkv210() || machine_is_smdkc110()) { smdk.num_links = 3; /* Secondary is at offset SAMSUNG_I2S_SECOFF from Primary */ -- cgit v0.10.2 From 6291319d4864848efc7b5d81389e2404fb478cb9 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:21 -0600 Subject: arm/dt: consolidate atags setup into setup_machine_atags In preparation for adding device tree support, this patch consolidates all of the atag-specific setup into a single function. v5: - drop double printk("Machine; %s\n", ...); call. - leave copying boot_command_line in setup_arch() since it isn't atags specific. v4: - adapt to the removal of lookup_machine_type() - break out dump of machine_desc table into dump_machine_table() because the device tree probe code will use it. - Add for_each_machine_desc() macro Tested-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Russell King Signed-off-by: Grant Likely diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index bf13b81..4764e67 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -48,6 +48,13 @@ struct machine_desc { extern struct machine_desc *machine_desc; /* + * Machine type table - also only accessible during boot + */ +extern struct machine_desc __arch_info_begin[], __arch_info_end[]; +#define for_each_machine_desc(p) \ + for (p = __arch_info_begin; p < __arch_info_end; p++) + +/* * Set of macros to define architecture features. This is built into * a table by the linker. */ diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 109997e..42c2f0c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -439,25 +439,12 @@ void cpu_init(void) : "r14"); } -static struct machine_desc * __init setup_machine(unsigned int nr) +static void __init dump_machine_table(void) { - extern struct machine_desc __arch_info_begin[], __arch_info_end[]; struct machine_desc *p; - /* - * locate machine in the list of supported machines. - */ - for (p = __arch_info_begin; p < __arch_info_end; p++) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - return p; - } - - early_print("\n" - "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" - "Available machine support:\n\nID (hex)\tNAME\n", nr); - - for (p = __arch_info_begin; p < __arch_info_end; p++) + early_print("Available machine support:\n\nID (hex)\tNAME\n"); + for_each_machine_desc(p) early_print("%08x\t%s\n", p->nr, p->name); early_print("\nPlease check your kernel config and/or bootloader.\n"); @@ -796,23 +783,29 @@ static void __init squash_mem_tags(struct tag *tag) tag->hdr.tag = ATAG_NONE; } -void __init setup_arch(char **cmdline_p) +static struct machine_desc * __init setup_machine_tags(unsigned int nr) { struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc; + struct machine_desc *mdesc = NULL, *p; char *from = default_command_line; init_tags.mem.start = PHYS_OFFSET; - unwind_init(); - - setup_processor(); - mdesc = setup_machine(machine_arch_type); - machine_desc = mdesc; - machine_name = mdesc->name; + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } - if (mdesc->soft_reboot) - reboot_setup("s"); + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", nr); + dump_machine_table(); /* does not return */ + } if (__atags_pointer) tags = phys_to_virt(__atags_pointer); @@ -857,14 +850,32 @@ void __init setup_arch(char **cmdline_p) parse_tags(tags); } + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} + + +void __init setup_arch(char **cmdline_p) +{ + struct machine_desc *mdesc; + + unwind_init(); + + setup_processor(); + mdesc = setup_machine_tags(machine_arch_type); + machine_desc = mdesc; + machine_name = mdesc->name; + + if (mdesc->soft_reboot) + reboot_setup("s"); + init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) _end; - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - /* populate cmd_line too for later use, preserving boot_command_line */ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; -- cgit v0.10.2 From 93c02ab40ae6e06cb24d14845d9f008fdd24f43d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:21 -0600 Subject: arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr ] Tested-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Russell King Signed-off-by: Grant Likely diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 4764e67..946f4d7 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -18,6 +18,8 @@ struct machine_desc { unsigned int nr; /* architecture number */ const char *name; /* architecture name */ unsigned long boot_params; /* tagged list */ + const char **dt_compat; /* array of device tree + * 'compatible' strings */ unsigned int nr_irqs; /* number of IRQs */ diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index 8f1037f..11b8708 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -21,5 +21,17 @@ static inline void irq_dispose_mapping(unsigned int virq) return; } +extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); +extern void arm_dt_memblock_reserve(void); + +#else /* CONFIG_OF */ + +static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) +{ + return NULL; +} + +static inline void arm_dt_memblock_reserve(void) { } + #endif /* CONFIG_OF */ #endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 93b4702..ee2ad8a 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -218,6 +218,8 @@ extern struct meminfo meminfo; #define bank_phys_size(bank) (bank)->size extern int arm_add_memory(phys_addr_t start, unsigned long size); +extern void early_print(const char *str, ...); +extern void dump_machine_table(void); #endif /* __KERNEL__ */ diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 75e3df8..a701e42 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -21,6 +21,8 @@ #include #include +#include +#include void __init early_init_dt_add_memory_arch(u64 base, u64 size) { @@ -32,6 +34,102 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) return alloc_bootmem_align(size, align); } +void __init arm_dt_memblock_reserve(void) +{ + u64 *reserve_map, base, size; + + if (!initial_boot_params) + return; + + /* Reserve the dtb region */ + memblock_reserve(virt_to_phys(initial_boot_params), + be32_to_cpu(initial_boot_params->totalsize)); + + /* + * Process the reserve map. This will probably overlap the initrd + * and dtb locations which are already reserved, but overlaping + * doesn't hurt anything + */ + reserve_map = ((void*)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_mem_rsvmap); + while (1) { + base = be64_to_cpup(reserve_map++); + size = be64_to_cpup(reserve_map++); + if (!size) + break; + memblock_reserve(base, size); + } +} + +/** + * setup_machine_fdt - Machine setup when an dtb was passed to the kernel + * @dt_phys: physical address of dt blob + * + * If a dtb was passed to the kernel in r2, then use it to choose the + * correct machine_desc and to setup the system. + */ +struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) +{ + struct boot_param_header *devtree; + struct machine_desc *mdesc, *mdesc_best = NULL; + unsigned int score, mdesc_score = ~1; + unsigned long dt_root; + const char *model; + + devtree = phys_to_virt(dt_phys); + + /* check device tree validity */ + if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) + return NULL; + + /* Search the mdescs for the 'best' compatible value match */ + initial_boot_params = devtree; + dt_root = of_get_flat_dt_root(); + for_each_machine_desc(mdesc) { + score = of_flat_dt_match(dt_root, mdesc->dt_compat); + if (score > 0 && score < mdesc_score) { + mdesc_best = mdesc; + mdesc_score = score; + } + } + if (!mdesc_best) { + const char *prop; + long size; + + early_print("\nError: unrecognized/unsupported " + "device tree compatible list:\n[ "); + + prop = of_get_flat_dt_prop(dt_root, "compatible", &size); + while (size > 0) { + early_print("'%s' ", prop); + size -= strlen(prop) + 1; + prop += strlen(prop) + 1; + } + early_print("]\n\n"); + + dump_machine_table(); /* does not return */ + } + + model = of_get_flat_dt_prop(dt_root, "model", NULL); + if (!model) + model = of_get_flat_dt_prop(dt_root, "compatible", NULL); + if (!model) + model = ""; + pr_info("Machine: %s, model: %s\n", mdesc_best->name, model); + + /* Retrieve various information from the /chosen node */ + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); + /* Initialize {size,address}-cells info */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + /* Setup memory, calling early_init_dt_add_memory_arch */ + of_scan_flat_dt(early_init_dt_scan_memory, NULL); + + /* Change machine number to match the mdesc we're using */ + __machine_arch_type = mdesc_best->nr; + + return mdesc_best; +} + /** * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# * diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 42c2f0c..05db25e 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,7 @@ #include #include +#include #include #include #include @@ -309,7 +311,7 @@ static void __init cacheid_init(void) */ extern struct proc_info_list *lookup_processor_type(unsigned int); -static void __init early_print(const char *str, ...) +void __init early_print(const char *str, ...) { extern void printascii(const char *); char buf[256]; @@ -439,7 +441,7 @@ void cpu_init(void) : "r14"); } -static void __init dump_machine_table(void) +void __init dump_machine_table(void) { struct machine_desc *p; @@ -837,8 +839,17 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr) if (tags->hdr.tag != ATAG_CORE) convert_to_tag_list(tags); #endif - if (tags->hdr.tag != ATAG_CORE) + + if (tags->hdr.tag != ATAG_CORE) { +#if defined(CONFIG_OF) + /* + * If CONFIG_OF is set, then assume this is a reasonably + * modern system that should pass boot parameters + */ + early_print("Warning: Neither atags nor dtb found\n"); +#endif tags = (struct tag *)&init_tags; + } if (mdesc->fixup) mdesc->fixup(mdesc, tags, &from, &meminfo); @@ -864,7 +875,9 @@ void __init setup_arch(char **cmdline_p) unwind_init(); setup_processor(); - mdesc = setup_machine_tags(machine_arch_type); + mdesc = setup_machine_fdt(__atags_pointer); + if (!mdesc) + mdesc = setup_machine_tags(machine_arch_type); machine_desc = mdesc; machine_name = mdesc->name; @@ -887,6 +900,8 @@ void __init setup_arch(char **cmdline_p) paging_init(mdesc); request_standard_resources(mdesc); + unflatten_device_tree(); + #ifdef CONFIG_SMP if (is_smp()) smp_init_cpus(); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 26c4054..b265975 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -322,6 +323,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) #endif arm_mm_memblock_reserve(); + arm_dt_memblock_reserve(); /* reserve any platform specific memblock areas */ if (mdesc->reserve) -- cgit v0.10.2 From ede338f4ce2fb5ee99d18751df32fbd3b10df268 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:23 -0600 Subject: dt: add documentation of ARM dt boot interface v6: typo fixes v5: clarified that dtb should be aligned on a 64 bit boundary in RAM. v3: added details to Documentation/arm/Booting Acked-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Russell King Signed-off-by: Grant Likely diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 7685029..4e686a2 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -65,13 +65,19 @@ looks at the connected hardware is beyond the scope of this document. The boot loader must ultimately be able to provide a MACH_TYPE_xxx value to the kernel. (see linux/arch/arm/tools/mach-types). - -4. Setup the kernel tagged list -------------------------------- +4. Setup boot data +------------------ Existing boot loaders: OPTIONAL, HIGHLY RECOMMENDED New boot loaders: MANDATORY +The boot loader must provide either a tagged list or a dtb image for +passing configuration data to the kernel. The physical address of the +boot data is passed to the kernel in register r2. + +4a. Setup the kernel tagged list +-------------------------------- + The boot loader must create and initialise the kernel tagged list. A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE. The ATAG_CORE tag may or may not be empty. An empty ATAG_CORE tag @@ -101,6 +107,24 @@ The tagged list must be placed in a region of memory where neither the kernel decompressor nor initrd 'bootp' program will overwrite it. The recommended placement is in the first 16KiB of RAM. +4b. Setup the device tree +------------------------- + +The boot loader must load a device tree image (dtb) into system ram +at a 64bit aligned address and initialize it with the boot data. The +dtb format is documented in Documentation/devicetree/booting-without-of.txt. +The kernel will look for the dtb magic value of 0xd00dfeed at the dtb +physical address to determine if a dtb has been passed instead of a +tagged list. + +The boot loader must pass at a minimum the size and location of the +system memory, and the root filesystem location. The dtb must be +placed in a region of memory where the kernel decompressor will not +overwrite it. The recommended placement is in the first 16KiB of RAM +with the caveat that it may not be located at physical address 0 since +the kernel interprets a value of 0 in r2 to mean neither a tagged list +nor a dtb were passed. + 5. Calling the kernel image --------------------------- @@ -125,7 +149,8 @@ In either case, the following conditions must be met: - CPU register settings r0 = 0, r1 = machine type number discovered in (3) above. - r2 = physical address of tagged list in system RAM. + r2 = physical address of tagged list in system RAM, or + physical address of device tree block (dtb) in system RAM - CPU mode All forms of interrupts must be disabled (IRQs and FIQs) diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 50619a0..7c1329d 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -12,8 +12,9 @@ Table of Contents ================= I - Introduction - 1) Entry point for arch/powerpc - 2) Entry point for arch/x86 + 1) Entry point for arch/arm + 2) Entry point for arch/powerpc + 3) Entry point for arch/x86 II - The DT block format 1) Header @@ -148,7 +149,46 @@ upgrades without significantly impacting the kernel code or cluttering it with special cases. -1) Entry point for arch/powerpc +1) Entry point for arch/arm +--------------------------- + + There is one single entry point to the kernel, at the start + of the kernel image. That entry point supports two calling + conventions. A summary of the interface is described here. A full + description of the boot requirements is documented in + Documentation/arm/Booting + + a) ATAGS interface. Minimal information is passed from firmware + to the kernel with a tagged list of predefined parameters. + + r0 : 0 + + r1 : Machine type number + + r2 : Physical address of tagged list in system RAM + + b) Entry with a flattened device-tree block. Firmware loads the + physical address of the flattened device tree block (dtb) into r2, + r1 is not used, but it is considered good practise to use a valid + machine number as described in Documentation/arm/Booting. + + r0 : 0 + + r1 : Valid machine type number. When using a device tree, + a single machine type number will often be assigned to + represent a class or family of SoCs. + + r2 : physical pointer to the device-tree block + (defined in chapter II) in RAM. Device tree can be located + anywhere in system RAM, but it should be aligned on a 64 bit + boundary. + + The kernel will differentiate between ATAGS and device tree booting by + reading the memory pointed to by r2 and looking for either the flattened + device tree block magic value (0xd00dfeed) or the ATAG_CORE value at + offset 0x4 from r2 (0x54410001). + +2) Entry point for arch/powerpc ------------------------------- There is one single entry point to the kernel, at the start @@ -226,7 +266,7 @@ it with special cases. cannot support both configurations with Book E and configurations with classic Powerpc architectures. -2) Entry point for arch/x86 +3) Entry point for arch/x86 ------------------------------- There is one single 32bit entry point to the kernel at code32_start, -- cgit v0.10.2 From 1a717c00501f02200fa003755e54f9fcbd2f865b Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Mon, 23 May 2011 21:05:48 +0530 Subject: davinci: move DM64XX_VDD3P3V_PWDN to devices.c Move the definition of DM64XX_VDD3P3V_PWDN from hardware.h to devices.c since it is used only there. This also helps rid hardware.h of platform private stuff. Signed-off-by: Manjunath Hadli Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 22ebc64..8f4f736 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -33,6 +33,9 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 + static struct resource i2c_resources[] = { { .start = DAVINCI_I2C_BASE, diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index c45ba1f..414e0b9 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -21,9 +21,6 @@ */ #define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 -/* System control register offsets */ -#define DM64XX_VDD3P3V_PWDN 0x48 - /* * I/O mapping */ -- cgit v0.10.2 From 76b2ab76a4492f8f43c511857181f8421901ce3f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 14 Apr 2011 00:34:03 +0800 Subject: at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option no board configure it as 'n' and it's an issue to merge all defconfigs in one On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). so will pass it via system_rev Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: Patrice Vilchez diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2d299bf..8cbc3aa 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -3,9 +3,6 @@ if ARCH_AT91 config HAVE_AT91_DATAFLASH_CARD bool -config HAVE_NAND_ATMEL_BUSWIDTH_16 - bool - config HAVE_AT91_USART3 bool @@ -209,7 +206,6 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit @@ -270,7 +266,6 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. @@ -286,7 +281,6 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. @@ -302,7 +296,6 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. @@ -343,7 +336,6 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. @@ -351,7 +343,6 @@ config MACH_AT91SAM9G20EK config MACH_AT91SAM9G20EK_2MMC depends on MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -416,7 +407,6 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -433,7 +423,6 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. @@ -450,7 +439,6 @@ config MACH_AT572D940HFEB bool "AT572D940HF-EK" depends on ARCH_AT572D940HF select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT572D940HF-EK evaluation kit. @@ -483,13 +471,6 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_ATMEL_BUSWIDTH_16 - bool "Enable 16-bit data bus interface to NAND flash" - depends on HAVE_NAND_ATMEL_BUSWIDTH_16 - help - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). - # ---------------------------------------------------------- comment "AT91 Feature Selections" diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c index 3929f1c..096b99f 100644 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ b/arch/arm/mach-at91/board-at572d940hf_ek.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -216,11 +217,6 @@ static struct atmel_nand_data __initdata eb_nand_data = { /* .rdy_pin = AT91_PIN_PC16, */ .enable_pin = AT91_PIN_PA15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata eb_nand_smc_config = { @@ -243,6 +239,7 @@ static struct sam9_smc_config __initdata eb_nand_smc_config = { static void __init eb_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (eb_nand_data.bus_width_16) eb_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index e727444..96010d4 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -44,6 +44,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -187,11 +188,6 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = { // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { @@ -219,6 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index de1816e..fdfa144 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -44,6 +44,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -191,11 +192,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -218,6 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 14acc90..c2773b5 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -48,6 +48,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bfe490d..1dabc0a 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -47,6 +47,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -198,11 +199,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -225,6 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index ca8198b..d13acd5 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,6 +43,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -175,11 +176,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -202,6 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 6c999db..49d6849 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -155,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -182,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h new file mode 100644 index 0000000..b855ee7 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD + * + * Under GPLv2 only + */ + +#ifndef __ARCH_SYSTEM_REV_H__ +#define __ARCH_SYSTEM_REV_H__ + +/* + * board revision encoding + * mach specific + * the 16-31 bit are reserved for at91 generic information + * + * bit 31: + * 0 => nand 16 bit + * 1 => nand 8 bit + */ +#define BOARD_HAVE_NAND_8BIT (1 << 31) +static int inline board_have_nand_8bit(void) +{ + return system_rev & BOARD_HAVE_NAND_8BIT; +} + +#endif /* __ARCH_SYSTEM_REV_H__ */ -- cgit v0.10.2 From dbadf0f29e2f3719ab950fb3a59e132bbe4bf63e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 5 Apr 2011 01:48:14 +0800 Subject: at91sam9263: merge all boards defconfig into only one MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tested on at91sam9263ek Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Guillaume GARDET Cc: Grégory Hermant Cc: Nicolas Ferre diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig new file mode 100644 index 0000000..1cf9626 --- /dev/null +++ b/arch/arm/configs/at91sam9263_defconfig @@ -0,0 +1,168 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9263=y +CONFIG_MACH_AT91SAM9263EK=y +CONFIG_MACH_USB_A9263=y +CONFIG_MACH_NEOCORE926=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_BLOCK2MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_SDIO_UART=m +CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_FUSE_FS=m +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_FTRACE=y +CONFIG_DEBUG_USER=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig deleted file mode 100644 index 8a04d6f..0000000 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_AT91SAM9263EK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig deleted file mode 100644 index 462dd18..0000000 --- a/arch/arm/configs/neocore926_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_NEOCORE926=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_ATMEL_PWM=y -CONFIG_ATMEL_TCLIB=y -CONFIG_SCSI=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_SERIAL_ATMEL_PDC is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_LOGO=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=y -CONFIG_SDIO_UART=y -CONFIG_MMC_AT91=m -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_AUTOFS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig deleted file mode 100644 index ee82d09..0000000 --- a/arch/arm/configs/usb-a9263_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_USB_A9263=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set -- cgit v0.10.2 From dd41d3216b05200cf01381927804a35315352a35 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 5 Apr 2011 17:52:10 +0800 Subject: at91sam9261: rename at91sam9261ek to at91sam9261 defconfig and update it with ubi, sound, nfs support etc... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig new file mode 100644 index 0000000..ade6b2f --- /dev/null +++ b/arch/arm/configs/at91sam9261_defconfig @@ -0,0 +1,158 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9261=y +CONFIG_MACH_AT91SAM9261EK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_DM9000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_ZD1211RW=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_AT73C213=y +CONFIG_SND_USB_AUDIO=m +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_FTRACE=y +CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig deleted file mode 100644 index b46025b..0000000 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ /dev/null @@ -1,95 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9261=y -CONFIG_MACH_AT91SAM9261EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -- cgit v0.10.2 From 2b348e2f82f532e3aff8e0ce9293033b3294c1e0 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 10 Apr 2011 14:10:05 +0800 Subject: atmel_serial: keep the platform_device unchanged specify the port num via platform_data this will allow to match the clock with the plaform_dev staticaly Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Alan Cox Cc: Nicolas Ferre Cc: Patrice Vilchez Cc: Hans-Christian Egtvedt Cc: Greg Kroah-Hartman diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c index 0fc20a2..e52c8e0 100644 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ b/arch/arm/mach-at91/at572d940hf_devices.c @@ -822,6 +822,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -847,7 +848,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 21020ce..ffda909 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1199,6 +1199,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1224,7 +1225,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7b53922..761559e 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1109,6 +1109,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1139,7 +1140,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 07eb7b0..6f8ec8d 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1139,6 +1139,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1179,7 +1180,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 59fc483..8792f9b 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -989,6 +989,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1014,7 +1015,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fb5c23a..47a9f96 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1370,6 +1370,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1395,7 +1396,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 5e9f8a4..eee27ee 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1527,6 +1527,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1557,7 +1558,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c49262b..d194b08 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -1141,6 +1141,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1171,7 +1172,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2b499eb..c44e94e 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -140,6 +140,7 @@ extern void __init at91_set_serial_console(unsigned portnr); extern struct platform_device *atmel_default_console_device; struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index bfc9d07..aa677e2 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1014,6 +1014,7 @@ static struct platform_device *__initdata at32_usarts[4]; void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (hw_id) { case 0: @@ -1042,7 +1043,8 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) data->regs = (void __iomem *)pdev->resource[0].start; } - pdev->id = line; + pdata = pdev->dev.platform_data; + pdata->num = portnr; at32_usarts[line] = pdev; } diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 6174020..679458d 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -33,6 +33,7 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CLK 0x04 struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virtual base address, if any */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 652bdac..6d5d6e6 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1420,7 +1420,7 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, port->flags = UPF_BOOT_AUTOCONF; port->ops = &atmel_pops; port->fifosize = 1; - port->line = pdev->id; + port->line = data->num; port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; -- cgit v0.10.2 From 1cef3e15721dc9e75f9b661270153e1d6f5e0993 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 11 Apr 2011 23:31:28 +0800 Subject: at91/board-eco920: remove at91_beeper ressource as no driver at91_beeper exist Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index a158a0c..87f6f83 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -86,21 +86,6 @@ static struct platform_device eco920_flash = { .num_resources = 1, }; -static struct resource at91_beeper_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TC3, - .end = AT91RM9200_BASE_TC3 + 0x39, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device at91_beeper = { - .name = "at91_beeper", - .id = 0, - .resource = at91_beeper_resources, - .num_resources = ARRAY_SIZE(at91_beeper_resources), -}; - static struct spi_board_info eco920_spi_devices[] = { { /* CAN controller */ .modalias = "tlv5638", @@ -139,10 +124,6 @@ static void __init eco920_board_init(void) AT91_SMC_TDF_(1) /* float time */ ); - at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper"); - at91_set_B_periph(AT91_PIN_PB6, 0); - platform_device_register(&at91_beeper); - at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); } -- cgit v0.10.2 From 1b021a3b23a40be89c4f3fbe6f4696aa15141f26 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 28 Apr 2011 20:19:32 +0800 Subject: at91: fix map_io init usage switch early init to init_early and introduce soc map_io with this Patch we will not do any more early device setup during the map io tks to Russell to point the new call back Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez Acked-by: Russell King Acked-by: Andrew Victor diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c index a6b9c68..bacd376 100644 --- a/arch/arm/mach-at91/at572d940hf.c +++ b/arch/arm/mach-at91/at572d940hf.c @@ -302,11 +302,14 @@ static void at572d940hf_reset(void) * AT572D940HF processor initialization * -------------------------------------------------------------------- */ -void __init at572d940hf_initialize(unsigned long main_clock) +void __init at572d940hf_map_io(void) { /* Map peripherals */ iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc)); +} +void __init at572d940hf_initialize(unsigned long main_clock) +{ at91_arch_reset = at572d940hf_reset; at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1) | (1 << AT572D940HF_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 7337617..69df2bb 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -303,11 +303,14 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_initialize(unsigned long main_clock) +void __init at91cap9_map_io(void) { /* Map peripherals */ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); +} +void __init at91cap9_initialize(unsigned long main_clock) +{ at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2e9ecad..164a98e 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -270,11 +270,14 @@ static void at91rm9200_reset(void) /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +void __init at91rm9200_map_io(void) { /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); +} +void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +{ at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 195208b..5430669 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -289,7 +289,7 @@ static void at91sam9260_poweroff(void) * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ -static void __init at91sam9xe_initialize(void) +static void __init at91sam9xe_map_io(void) { unsigned long cidr, sram_size; @@ -310,18 +310,21 @@ static void __init at91sam9xe_initialize(void) iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); } -void __init at91sam9260_initialize(unsigned long main_clock) +void __init at91sam9260_map_io(void) { /* Map peripherals */ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); if (cpu_is_at91sam9xe()) - at91sam9xe_initialize(); + at91sam9xe_map_io(); else if (cpu_is_at91sam9g20()) iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); else iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); +} +void __init at91sam9260_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fcad886..e3bafae 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -267,7 +267,7 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_initialize(unsigned long main_clock) +void __init at91sam9261_map_io(void) { /* Map peripherals */ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); @@ -276,8 +276,10 @@ void __init at91sam9261_initialize(unsigned long main_clock) iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); else iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); +} - +void __init at91sam9261_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 249f900..6a085fe 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -279,11 +279,14 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_initialize(unsigned long main_clock) +void __init at91sam9263_map_io(void) { /* Map peripherals */ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); +} +void __init at91sam9263_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index c67b47f..024e456 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -306,11 +306,14 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_initialize(unsigned long main_clock) +void __init at91sam9g45_map_io(void) { /* Map peripherals */ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); +} +void __init at91sam9g45_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 6a9d24e..67c8697 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -252,7 +252,7 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_initialize(unsigned long main_clock) +void __init at91sam9rl_map_io(void) { unsigned long cidr, sram_size; @@ -275,7 +275,10 @@ void __init at91sam9rl_initialize(unsigned long main_clock) /* Map SRAM */ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); +} +void __init at91sam9rl_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 8a3fc84..672bbd8 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,7 +39,7 @@ #include "generic.h" -static void __init onearm_map_io(void) +static void __init onearm_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -94,7 +94,8 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = onearm_map_io, + .map_io = at91rm9200_map_io, + .init_early = onearm_init_early, .init_irq = onearm_init_irq, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index cba7f77..00a92a5 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init afeb9260_map_io(void) +static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -220,7 +220,8 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = afeb9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = afeb9260_init_early, .init_irq = afeb9260_init_irq, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c index 096b99f..a11d709 100644 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ b/arch/arm/mach-at91/board-at572d940hf_ek.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init eb_map_io(void) +static void __init eb_init_early(void) { /* Initialize processor: 12.500 MHz crystal */ at572d940hf_initialize(12000000); @@ -317,7 +317,8 @@ MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = eb_map_io, + .map_io = at572d940hf_map_io, + .init_early = eb_init_early, .init_irq = eb_init_irq, .init_machine = eb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b54e3e6..3025b90 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init cam60_map_io(void) +static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91sam9260_initialize(10000000); @@ -200,7 +200,8 @@ MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cam60_map_io, + .map_io = at91sam9260_map_io, + .init_early = cam60_init_early, .init_irq = cam60_init_irq, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 96010d4..af90569 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -50,7 +50,7 @@ #include "generic.h" -static void __init cap9adk_map_io(void) +static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ at91cap9_initialize(12000000); @@ -398,7 +398,8 @@ MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cap9adk_map_io, + .map_io = at91cap9_map_io, + .init_early = cap9adk_init_early, .init_irq = cap9adk_init_irq, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 295e1e7..dfa98f3 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -40,7 +40,7 @@ #include "generic.h" -static void __init carmeva_map_io(void) +static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ at91rm9200_initialize(20000000, AT91RM9200_BGA); @@ -164,7 +164,8 @@ MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = carmeva_map_io, + .map_io = at91rm9200_map_io, + .init_early = carmeva_init_early, .init_irq = carmeva_init_irq, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 3838594..34fd892 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -47,7 +47,7 @@ #include "sam9_smc.h" #include "generic.h" -static void __init cpu9krea_map_io(void) +static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -377,7 +377,8 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") /* Maintainer: Eric Benard - EUKREA Electromatique */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cpu9krea_map_io, + .map_io = at91sam9260_map_io, + .init_early = cpu9krea_init_early, .init_irq = cpu9krea_init_irq, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2f4dd8c..34c9d0c 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -50,7 +50,7 @@ static struct gpio_led cpuat91_leds[] = { }, }; -static void __init cpuat91_map_io(void) +static void __init cpuat91_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -177,7 +177,8 @@ MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = cpuat91_map_io, + .map_io = at91rm9200_map_io, + .init_early = cpuat91_init_early, .init_irq = cpuat91_init_irq, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 464839d..a48a32d 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -43,7 +43,7 @@ #include "generic.h" -static void __init csb337_map_io(void) +static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); @@ -259,7 +259,8 @@ MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb337_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb337_init_early, .init_irq = csb337_init_irq, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 431688c..7f0ee1c 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -40,7 +40,7 @@ #include "generic.h" -static void __init csb637_map_io(void) +static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); @@ -140,7 +140,8 @@ MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb637_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb637_init_early, .init_irq = csb637_init_irq, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d8df59a..d2023f2 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -35,7 +35,7 @@ static void __init at91eb01_init_irq(void) at91x40_init_interrupts(NULL); } -static void __init at91eb01_map_io(void) +static void __init at91eb01_init_early(void) { at91x40_initialize(40000000); } @@ -43,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer */ .timer = &at91x40_timer, + .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, - .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 6cf6566..0de1ba4 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -40,7 +40,7 @@ #include "generic.h" -static void __init eb9200_map_io(void) +static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); @@ -122,7 +122,8 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eb9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = eb9200_init_early, .init_irq = eb9200_init_irq, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index de2fd04..bd46395 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -42,7 +42,7 @@ #include "generic.h" -static void __init ecb_at91map_io(void) +static void __init ecb_at91init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -170,7 +170,8 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ecb_at91map_io, + .map_io = at91rm9200_map_io, + .init_early = ecb_at91init_early, .init_irq = ecb_at91init_irq, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 87f6f83..6fff26d 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -28,7 +28,7 @@ #include #include "generic.h" -static void __init eco920_map_io(void) +static void __init eco920_init_early(void) { at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -131,7 +131,8 @@ MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eco920_map_io, + .map_io = at91rm9200_map_io, + .init_early = eco920_init_early, .init_irq = eco920_init_irq, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index c8a62dc..934542f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,7 +37,7 @@ #include "generic.h" -static void __init flexibity_map_io(void) +static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -156,7 +156,8 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = flexibity_map_io, + .map_io = at91sam9260_map_io, + .init_early = flexibity_init_early, .init_irq = flexibity_init_irq, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index dfc7dfe..470a66b 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -57,7 +57,7 @@ */ -static void __init foxg20_map_io(void) +static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -268,7 +268,8 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = foxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = foxg20_init_early, .init_irq = foxg20_init_irq, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index bc28136..2b409de 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -38,9 +38,9 @@ #include "sam9_smc.h" #include "generic.h" -static void __init gsia18s_map_io(void) +static void __init gsia18s_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). @@ -578,7 +578,8 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = gsia18s_map_io, + .map_io = at91sam9260_map_io, + .init_early = gsia18s_init_early, .init_irq = init_irq, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index d2e1f4e..49557d3 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,7 +39,7 @@ #include "generic.h" -static void __init kafa_map_io(void) +static void __init kafa_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -96,7 +96,8 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kafa_map_io, + .map_io = at91rm9200_map_io, + .init_early = kafa_init_early, .init_irq = kafa_init_irq, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a13d206..fca061a 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -42,7 +42,7 @@ #include "generic.h" -static void __init kb9202_map_io(void) +static void __init kb9202_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91rm9200_initialize(10000000, AT91RM9200_PQFP); @@ -138,7 +138,8 @@ MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kb9202_map_io, + .map_io = at91rm9200_map_io, + .init_early = kb9202_init_early, .init_irq = kb9202_init_irq, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index fe5f1d4..004b76d 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -51,7 +51,7 @@ #include "generic.h" -static void __init neocore926_map_io(void) +static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ at91sam9263_initialize(20000000); @@ -389,7 +389,8 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = neocore926_map_io, + .map_io = at91sam9263_map_io, + .init_early = neocore926_init_early, .init_irq = neocore926_init_irq, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index feb6578..df1ed7e 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,9 +37,9 @@ #include "generic.h" -static void __init pcontrol_g20_map_io(void) +static void __init pcontrol_g20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -224,7 +224,8 @@ MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = pcontrol_g20_map_io, + .map_io = at91sam9260_map_io, + .init_early = pcontrol_g20_init_early, .init_irq = init_irq, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 55dad3a..97372f6 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,7 +43,7 @@ #include "generic.h" -static void __init picotux200_map_io(void) +static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); @@ -125,7 +125,8 @@ MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = picotux200_map_io, + .map_io = at91rm9200_map_io, + .init_early = picotux200_init_early, .init_irq = picotux200_init_irq, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 69d15a8..5822d8e 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -270,7 +270,8 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 4c1047c..4f04f28 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init dk_map_io(void) +static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); @@ -229,7 +229,8 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = dk_map_io, + .map_io = at91rm9200_map_io, + .init_early = dk_init_early, .init_irq = dk_init_irq, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 9df1be8..cf161c5 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); @@ -195,7 +195,8 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ek_map_io, + .map_io = at91rm9200_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 25a26be..b925ba9 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -44,7 +44,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -214,7 +214,8 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index fdfa144..b1a3584 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -50,7 +50,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -355,7 +355,8 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c2773b5..57d2434 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -54,7 +54,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9261_initialize(18432000); @@ -622,7 +622,8 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9261_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 1dabc0a..232634d 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -53,7 +53,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ at91sam9263_initialize(16367660); @@ -453,7 +453,8 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index d13acd5..0a24f3f 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -61,7 +61,7 @@ static int inline ek_have_2mmc(void) } -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -405,7 +405,8 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END @@ -414,7 +415,8 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 49d6849..645c970 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9g45_initialize(12000000); @@ -423,7 +423,8 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9g45_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 3bf3408..102f862 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -38,7 +38,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9rl_initialize(12000000); @@ -331,7 +331,8 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9rl_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 17f7d9b..ad95628 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -40,7 +40,7 @@ #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) -static void __init snapper9260_map_io(void) +static void __init snapper9260_init_early(void) { at91sam9260_initialize(18432000); @@ -180,7 +180,8 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = snapper9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = snapper9260_init_early, .init_irq = snapper9260_init_irq, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index f8902b1..38515e4 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -void __init stamp9g20_map_io(void) +void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -44,9 +44,9 @@ void __init stamp9g20_map_io(void) at91_set_serial_console(0); } -static void __init stamp9g20evb_map_io(void) +static void __init stamp9g20evb_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -54,9 +54,9 @@ static void __init stamp9g20evb_map_io(void) | ATMEL_UART_DCD | ATMEL_UART_RI); } -static void __init portuxg20_map_io(void) +static void __init portuxg20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -300,7 +300,8 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = portuxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = portuxg20_init_early, .init_irq = init_irq, .init_machine = portuxg20_board_init, MACHINE_END @@ -309,7 +310,8 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20evb_map_io, + .map_io = at91sam9260_map_io, + .init_early = stamp9g20evb_init_early, .init_irq = init_irq, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 07784ba..a0c17d5 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -230,7 +230,8 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index b6145089..5356af7 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ at91sam9263_initialize(12000000); @@ -246,7 +246,8 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index e0f0080..8f9ea5a 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -49,7 +49,7 @@ #include "generic.h" -static void __init yl9200_map_io(void) +static void __init yl9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -596,7 +596,8 @@ MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = yl9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = yl9200_init_early, .init_irq = yl9200_init_irq, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0c66deb..50d46fa 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,6 +8,17 @@ * published by the Free Software Foundation. */ + /* Map io */ +extern void __init at91rm9200_map_io(void); +extern void __init at91sam9260_map_io(void); +extern void __init at91sam9261_map_io(void); +extern void __init at91sam9263_map_io(void); +extern void __init at91sam9rl_map_io(void); +extern void __init at91sam9g45_map_io(void); +extern void __init at91x40_map_io(void); +extern void __init at91cap9_map_io(void); +extern void __init at572d940hf_map_io(void); + /* Processors */ extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); extern void __init at91sam9260_initialize(unsigned long main_clock); diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h index 6120f9c..f62c0ab 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -1,7 +1,7 @@ #ifndef __MACH_STAMP9G20_H #define __MACH_STAMP9G20_H -void stamp9g20_map_io(void); +void stamp9g20_init_early(void); void stamp9g20_board_init(void); #endif -- cgit v0.10.2 From bd60299594fb1d28ae66563c9e76a0b89b0412cf Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 2 Feb 2011 07:27:07 +0100 Subject: at91: switch to CLKDEV_LOOKUP we do not change the clock naming convention so does not need to switch the AVR32 yet Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: Patrice Vilchez diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7275009..5fd0be9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -294,6 +294,7 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select CLKDEV_LOOKUP help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c index bacd376..d069907 100644 --- a/arch/arm/mach-at91/at572d940hf.c +++ b/arch/arm/mach-at91/at572d940hf.c @@ -205,6 +205,21 @@ static struct clk *periph_clocks[] __initdata = { /* irq0 .. irq2 */ }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The five programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -262,6 +277,11 @@ static void __init at572d940hf_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); @@ -272,6 +292,18 @@ static void __init at572d940hf_register_clocks(void) clk_register(&hck1); } +static struct clk_lookup console_clock_lookup; + +void __init at572d940hf_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c index e52c8e0..14863b8 100644 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ b/arch/arm/mach-at91/at572d940hf_devices.c @@ -532,7 +532,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk"); platform_device_register(&at572d940hf_spi0_device); } if (enable_spi1) { @@ -540,7 +539,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk"); platform_device_register(&at572d940hf_spi1_device); } } @@ -587,10 +585,6 @@ static struct platform_device at572d940hf_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk"); platform_device_register(&at572d940hf_tcb_device); } #else @@ -828,22 +822,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at572d940hf_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT572D940HF_ID_US0: pdev = &at572d940hf_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT572D940HF_ID_US1: pdev = &at572d940hf_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT572D940HF_ID_US2: pdev = &at572d940hf_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; @@ -857,8 +847,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at572d940hf_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 69df2bb..17fae4a 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91cap9_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index ffda909..cd850ed 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc1_device); } } @@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi0_device); } if (enable_spi1) { @@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi1_device); } } @@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); platform_device_register(&at91cap9_tcb_device); } #else @@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91CAP9_ID_SSC0: pdev = &at91cap9_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91CAP9_ID_SSC1: pdev = &at91cap9_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; default: return; @@ -1205,22 +1193,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91cap9_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91CAP9_ID_US0: pdev = &at91cap9_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US1: pdev = &at91cap9_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US2: pdev = &at91cap9_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; @@ -1234,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91cap9_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 164a98e..d3638bd 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -191,6 +191,26 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq6 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -227,12 +247,29 @@ static void __init at91rm9200_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91rm9200_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 761559e..a0ba475 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb0_device); - - at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb1_device); } #else @@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91RM9200_ID_SSC0: pdev = &at91rm9200_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC1: pdev = &at91rm9200_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC2: pdev = &at91rm9200_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); break; default: return; @@ -1115,27 +1104,22 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91rm9200_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91RM9200_ID_US0: pdev = &at91rm9200_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US1: pdev = &at91rm9200_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US2: pdev = &at91rm9200_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US3: pdev = &at91rm9200_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; @@ -1149,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91rm9200_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 5430669..7d606b0 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9260_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 6f8ec8d..1fdeb90 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi0_device); } if (enable_spi1) { @@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi1_device); } } @@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb0_device); - - at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb1_device); } #else @@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9260_ID_SSC: pdev = &at91sam9260_ssc_device; configure_ssc_pins(pins); - at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); break; default: return; @@ -1145,37 +1134,30 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9260_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US0: pdev = &at91sam9260_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US1: pdev = &at91sam9260_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US2: pdev = &at91sam9260_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US3: pdev = &at91sam9260_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US4: pdev = &at91sam9260_uart4_device; configure_usart4_pins(); - at91_clock_associate("usart4_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US5: pdev = &at91sam9260_uart5_device; configure_usart5_pins(); - at91_clock_associate("usart5_clk", &pdev->dev, "usart"); break; default: return; @@ -1189,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9260_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index e3bafae..c148316 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); @@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9261_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8792f9b..3eb4538 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi0_device); } if (enable_spi1) { @@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi1_device); } } @@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9261_tcb_device); } #else @@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9261_ID_SSC0: pdev = &at91sam9261_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC1: pdev = &at91sam9261_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC2: pdev = &at91sam9261_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); break; default: return; @@ -995,22 +986,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9261_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US0: pdev = &at91sam9261_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US1: pdev = &at91sam9261_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US2: pdev = &at91sam9261_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; @@ -1024,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9261_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a085fe..dc28477 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9263_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 47a9f96..ffe081b 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -308,7 +308,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -339,7 +338,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc1_device); } } @@ -686,7 +684,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi0_device); } if (enable_spi1) { @@ -694,7 +691,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi1_device); } } @@ -941,8 +937,6 @@ static struct platform_device at91sam9263_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); platform_device_register(&at91sam9263_tcb_device); } #else @@ -1171,12 +1165,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9263_ID_SSC0: pdev = &at91sam9263_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9263_ID_SSC1: pdev = &at91sam9263_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1376,22 +1368,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9263_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US0: pdev = &at91sam9263_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US1: pdev = &at91sam9263_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US2: pdev = &at91sam9263_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; @@ -1405,8 +1393,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9263_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 024e456..2bb6ff9 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -184,22 +184,6 @@ static struct clk vdec_clk = { .type = CLK_TYPE_PERIPHERAL, }; -/* One additional fake clock for ohci */ -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &uhphs_clk, -}; - -/* One additional fake clock for second TC block */ -static struct clk tcb1_clk = { - .name = "tcb1_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &tcb0_clk, -}; - static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -228,8 +212,30 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, // irq0 - &ohci_clk, - &tcb1_clk, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for ohci */ + CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), }; /* @@ -256,6 +262,11 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) clk_register(&vdec_clk); @@ -263,6 +274,18 @@ static void __init at91sam9g45_register_clocks(void) clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9g45_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index eee27ee..0567486 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -180,7 +180,6 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) } usbh_ehci_data = *data; - at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk"); platform_device_register(&at91_usbh_ehci_device); } #else @@ -266,10 +265,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -478,7 +473,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc0_device); } else { /* MCI1 */ @@ -504,7 +498,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc1_device); } @@ -801,7 +794,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi0_device); } if (enable_spi1) { @@ -809,7 +801,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi1_device); } } @@ -999,10 +990,7 @@ static struct platform_device at91sam9g45_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all six TC channels */ - at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb0_device); - at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb1_device); } #else @@ -1286,12 +1274,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9G45_ID_SSC0: pdev = &at91sam9g45_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9G45_ID_SSC1: pdev = &at91sam9g45_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1533,27 +1519,22 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9g45_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US0: pdev = &at91sam9g45_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US1: pdev = &at91sam9g45_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US2: pdev = &at91sam9g45_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US3: pdev = &at91sam9g45_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; @@ -1567,8 +1548,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9g45_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 67c8697..1a40f16 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -190,6 +190,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -214,10 +232,27 @@ static void __init at91sam9rl_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9rl_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d194b08..c296045 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -155,10 +155,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -605,10 +601,6 @@ static struct platform_device at91sam9rl_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9rl_tcb_device); } #else @@ -892,12 +884,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9RL_ID_SSC0: pdev = &at91sam9rl_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9RL_ID_SSC1: pdev = &at91sam9rl_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1147,27 +1137,22 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9rl_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US0: pdev = &at91sam9rl_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US1: pdev = &at91sam9rl_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US2: pdev = &at91sam9rl_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US3: pdev = &at91sam9rl_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; @@ -1181,8 +1166,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9rl_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index ad3ec85..56ba3bd 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -37,11 +37,6 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} - void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 9113da6..ac103cb 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -163,7 +163,7 @@ static struct clk udpck = { .parent = &pllb, .mode = pmc_sys_mode, }; -static struct clk utmi_clk = { +struct clk utmi_clk = { .name = "utmi_clk", .parent = &main_clk, .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */ @@ -182,7 +182,7 @@ static struct clk uhpck = { * memory, interfaces to on-chip peripherals, the AIC, and sometimes more * (e.g baud rate generation). It's sourced from one of the primary clocks. */ -static struct clk mck = { +struct clk mck = { .name = "mck", .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ }; @@ -215,43 +215,6 @@ static struct clk __init *at91_css_to_clk(unsigned long css) return NULL; } -/* - * Associate a particular clock with a function (eg, "uart") and device. - * The drivers can then request the same 'function' with several different - * devices and not care about which clock name to use. - */ -void __init at91_clock_associate(const char *id, struct device *dev, const char *func) -{ - struct clk *clk = clk_get(NULL, id); - - if (!dev || !clk || !IS_ERR(clk_get(dev, func))) - return; - - clk->function = func; - clk->dev = dev; -} - -/* clocks cannot be de-registered no refcounting necessary */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *clk; - - list_for_each_entry(clk, &clocks, node) { - if (strcmp(id, clk->name) == 0) - return clk; - if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) - return clk; - } - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - static void __clk_enable(struct clk *clk) { if (clk->parent) @@ -498,32 +461,38 @@ postcore_initcall(at91_clk_debugfs_init); /*------------------------------------------------------------------------*/ /* Register a new clock */ +static void __init at91_clk_add(struct clk *clk) +{ + list_add_tail(&clk->node, &clocks); + + clk->cl.con_id = clk->name; + clk->cl.clk = clk; + clkdev_add(&clk->cl); +} + int __init clk_register(struct clk *clk) { if (clk_is_peripheral(clk)) { if (!clk->parent) clk->parent = &mck; clk->mode = pmc_periph_mode; - list_add_tail(&clk->node, &clocks); } else if (clk_is_sys(clk)) { clk->parent = &mck; clk->mode = pmc_sys_mode; - - list_add_tail(&clk->node, &clocks); } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS else if (clk_is_programmable(clk)) { clk->mode = pmc_sys_mode; init_programmable_clock(clk); - list_add_tail(&clk->node, &clocks); } #endif + at91_clk_add(clk); + return 0; } - /*------------------------------------------------------------------------*/ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) @@ -754,19 +723,19 @@ int __init at91_clock_init(unsigned long main_clock) /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) - list_add_tail(&standard_pmc_clocks[i]->node, &clocks); + at91_clk_add(standard_pmc_clocks[i]); if (cpu_has_pllb()) - list_add_tail(&pllb.node, &clocks); + at91_clk_add(&pllb); if (cpu_has_uhp()) - list_add_tail(&uhpck.node, &clocks); + at91_clk_add(&uhpck); if (cpu_has_udpfs()) - list_add_tail(&udpck.node, &clocks); + at91_clk_add(&udpck); if (cpu_has_utmi()) - list_add_tail(&utmi_clk.node, &clocks); + at91_clk_add(&utmi_clk); /* MCK and CPU clock are "always on" */ clk_enable(&mck); diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h index 6cf4b78..c2e63e4 100644 --- a/arch/arm/mach-at91/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -6,6 +6,8 @@ * published by the Free Software Foundation. */ +#include + #define CLK_TYPE_PRIMARY 0x1 #define CLK_TYPE_PLL 0x2 #define CLK_TYPE_PROGRAMMABLE 0x4 @@ -16,8 +18,7 @@ struct clk { struct list_head node; const char *name; /* unique clock name */ - const char *function; /* function of the clock */ - struct device *dev; /* device associated with function */ + struct clk_lookup cl; unsigned long rate_hz; struct clk *parent; u32 pmc_mask; @@ -29,3 +30,18 @@ struct clk { extern int __init clk_register(struct clk *clk); +extern struct clk mck; +extern struct clk utmi_clk; + +#define CLKDEV_CON_ID(_id, _clk) \ + { \ + .con_id = _id, \ + .clk = _clk, \ + } + +#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \ + { \ + .con_id = _con_id, \ + .dev_id = _dev_id, \ + .clk = _clk, \ + } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 50d46fa..ecba94e 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include + /* Map io */ extern void __init at91rm9200_map_io(void); extern void __init at91sam9260_map_io(void); @@ -50,8 +52,20 @@ extern struct sys_timer at91x40_timer; /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); +/* + * function to specify the clock of the default console. As we do not + * use the device/driver bus, the dev_name is not intialize. So we need + * to link the clock to a specific con_id only "usart" + */ +extern void __init at91rm9200_set_console_clock(int id); +extern void __init at91sam9260_set_console_clock(int id); +extern void __init at91sam9261_set_console_clock(int id); +extern void __init at91sam9263_set_console_clock(int id); +extern void __init at91sam9rl_set_console_clock(int id); +extern void __init at91sam9g45_set_console_clock(int id); +extern void __init at91cap9_set_console_clock(int id); +extern void __init at572d940hf_set_console_clock(int id); struct device; -extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func); /* Power Management */ extern void at91_irq_suspend(void); diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h new file mode 100644 index 0000000..04b37a8 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif -- cgit v0.10.2 From ee2e35015d4f09ce748a96a79582e959e6053f1a Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 2 May 2011 01:05:54 +0800 Subject: at91: factorize common irq ID Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez Cc: Andrew Victor diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h index be510cf..a738dc7 100644 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ b/arch/arm/mach-at91/include/mach/at572d940hf.h @@ -26,8 +26,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ #define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ #define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 9c6af97..a043bce 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ #define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ #define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 7898315..99e0f8d 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -19,8 +19,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 4e79036..8b6bf83 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 2b56185..eafbdda 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 2091f1e..e2d3482 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index a526869..520b14b 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller Interrupt */ #define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ #define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ #define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 87ba851..41dbbe6 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -17,8 +17,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller */ #define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 063ac44..a152ff8 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -15,8 +15,6 @@ /* * IRQ list. */ -#define AT91_ID_FIQ 0 /* FIQ */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91X40_ID_USART0 2 /* USART port 0 */ #define AT91X40_ID_USART1 3 /* USART port 1 */ #define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 3d64a75..3522464 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -39,6 +39,12 @@ #endif +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ + #ifdef CONFIG_MMU /* * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF -- cgit v0.10.2 From 3d51f259e819b49b3f88b594afcb044d1ffcda8a Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 3 May 2011 00:44:58 +0800 Subject: at91: drop boot_params and PLAT_PHYS_OFFSET select ARM_PATCH_PHYS_VIRT as with ARM_PATCH_PHYS_VIRT you can patch boot_params at runtime or any recent bootloader will provide a valid atags pointer in r2 as point out by Russell on AT91 we never use XIP so se do not need PLAT_PHYS_OFFSET Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez Cc: Andrew Victor Cc: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5fd0be9..f4b7dfa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -295,6 +295,7 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP + select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 672bbd8..73372ca 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -92,7 +92,6 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = onearm_init_early, diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 00a92a5..a4924de 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -218,7 +218,6 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = afeb9260_init_early, diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c index a11d709..dfa896d 100644 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ b/arch/arm/mach-at91/board-at572d940hf_ek.c @@ -315,7 +315,6 @@ static void __init eb_board_init(void) MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at572d940hf_map_io, .init_early = eb_init_early, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 3025b90..148fccb 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -198,7 +198,6 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = cam60_init_early, diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index af90569..1904fdf 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -396,7 +396,6 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91cap9_map_io, .init_early = cap9adk_init_early, diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index dfa98f3..3929b11 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -162,7 +162,6 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = carmeva_init_early, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 34fd892..9805110 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -375,7 +375,6 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = cpu9krea_init_early, diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 34c9d0c..620a36a 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -175,7 +175,6 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = cpuat91_init_early, diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index a48a32d..a7be81e 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -257,7 +257,6 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = csb337_init_early, diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 7f0ee1c..58a80c3 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -138,7 +138,6 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = csb637_init_early, diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 0de1ba4..e9fff80 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -120,7 +120,6 @@ static void __init eb9200_board_init(void) } MACHINE_START(ATEB9200, "Embest ATEB9200") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = eb9200_init_early, diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index bd46395..eea65ea 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -168,7 +168,6 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = ecb_at91init_early, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 6fff26d..90a44e5 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -129,7 +129,6 @@ static void __init eco920_board_init(void) MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = eco920_init_early, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 934542f..466c063 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -154,7 +154,6 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = flexibity_init_early, diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 470a66b..e2d1dc9 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -266,7 +266,6 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = foxg20_init_early, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 2b409de..1d4f36b 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -576,7 +576,6 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = gsia18s_init_early, diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 49557d3..4f17a1c 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -94,7 +94,6 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = kafa_init_early, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index fca061a..39247fa 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -136,7 +136,6 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = kb9202_init_early, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 004b76d..961e805 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -387,7 +387,6 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9263_map_io, .init_early = neocore926_init_early, diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index df1ed7e..21a21af 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -222,7 +222,6 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = pcontrol_g20_init_early, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 97372f6..8294eae 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -123,7 +123,6 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = picotux200_init_early, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 5822d8e..d1a6001 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -268,7 +268,6 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 4f04f28..b90d0f9 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -227,7 +227,6 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = dk_init_early, diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index cf161c5..51c2668 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -193,7 +193,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index b925ba9..aaf1bf0 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -212,7 +212,6 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index b1a3584..d600dc1 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -353,7 +353,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 57d2434..f897f84 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -620,7 +620,6 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9261_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 232634d..605b26f 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -451,7 +451,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9263_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 0a24f3f..7624cf0 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -403,7 +403,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, @@ -413,7 +412,6 @@ MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 645c970..063c95d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -421,7 +421,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9g45_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 102f862..effb399 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -329,7 +329,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9rl_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index ad95628..3eb0a11 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -178,7 +178,6 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = snapper9260_init_early, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 38515e4..5e5c856 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -298,7 +298,6 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = portuxg20_init_early, @@ -308,7 +307,6 @@ MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = stamp9g20evb_init_early, diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index a0c17d5..0e784e6 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -228,7 +228,6 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 5356af7..cf626dd 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -244,7 +244,6 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9263_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 8f9ea5a..167337f 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -594,7 +594,6 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = yl9200_init_early, diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index a043bce..6659938 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -121,6 +121,4 @@ #define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 520b14b..659304a 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -129,8 +129,6 @@ #define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ #define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #define CONSISTENT_DMA_SIZE SZ_4M /* diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 3522464..469d3af 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -88,13 +88,6 @@ #define AT91_CHIPSELECT_6 0x70000000 #define AT91_CHIPSELECT_7 0x80000000 -/* SDRAM */ -#ifdef CONFIG_DRAM_BASE -#define AT91_SDRAM_BASE CONFIG_DRAM_BASE -#else -#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 -#endif - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index c2cfe50..401c207 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -23,6 +23,4 @@ #include -#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE) - #endif -- cgit v0.10.2 From e57556e3b6dcbf9b459cd503b061457b6ed1758f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 24 Apr 2011 11:40:22 +0800 Subject: at91rm9200: introduce at91rm9200_set_type to specficy cpu package as we can not detect it by defaut the type will be bga introduce cpu_is_at91rm9200_bga and cpu_is_at91rm9200_pqfp Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index d3638bd..b228ce9 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "generic.h" #include "clock.h" @@ -303,6 +304,13 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } +int rm9200_type; +EXPORT_SYMBOL(rm9200_type); + +void __init at91rm9200_set_type(int type) +{ + rm9200_type = type; +} /* -------------------------------------------------------------------- * AT91RM9200 processor initialization @@ -313,7 +321,7 @@ void __init at91rm9200_map_io(void) iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } -void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +void __init at91rm9200_initialize(unsigned long main_clock) { at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) @@ -328,7 +336,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks at91rm9200_register_clocks(); /* Initialize GPIO subsystem */ - at91_gpio_init(at91rm9200_gpio, banks); + at91_gpio_init(at91rm9200_gpio, + cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); } diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 73372ca..ab1d463 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -35,14 +35,18 @@ #include #include +#include #include "generic.h" static void __init onearm_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 3929b11..f36b186 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -43,7 +43,7 @@ static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000, AT91RM9200_BGA); + at91rm9200_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 620a36a..6daabe3 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "generic.h" @@ -52,8 +53,11 @@ static struct gpio_led cpuat91_leds[] = { static void __init cpuat91_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index a7be81e..d98bcec 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -46,7 +46,7 @@ static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 58a80c3..019aab4 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -43,7 +43,7 @@ static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index e9fff80..e948453 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -43,7 +43,7 @@ static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index eea65ea..a6f57fa 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -38,14 +38,18 @@ #include #include +#include #include "generic.h" static void __init ecb_at91init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 90a44e5..bfc0062 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -26,11 +26,16 @@ #include #include +#include + #include "generic.h" static void __init eco920_init_early(void) { - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 4f17a1c..9b003ff 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,14 +35,18 @@ #include #include +#include #include "generic.h" static void __init kafa_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 39247fa..a813a74 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -36,7 +36,7 @@ #include #include - +#include #include #include "generic.h" @@ -44,8 +44,11 @@ static void __init kb9202_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000, AT91RM9200_PQFP); + at91rm9200_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 8294eae..756cc2a 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -46,7 +46,7 @@ static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index b90d0f9..aef9627 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -48,7 +48,7 @@ static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 51c2668..015a021 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -48,7 +48,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 167337f..c208cc3 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -45,14 +45,18 @@ #include #include #include +#include #include "generic.h" static void __init yl9200_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index ecba94e..5783bd1 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -22,7 +22,8 @@ extern void __init at91cap9_map_io(void); extern void __init at572d940hf_map_io(void); /* Processors */ -extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); +extern void __init at91rm9200_set_type(int type); +extern void __init at91rm9200_initialize(unsigned long main_clock); extern void __init at91sam9260_initialize(unsigned long main_clock); extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0700f21..ab00372 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -90,9 +90,16 @@ static inline unsigned long at91cap9_rev_identify(void) #endif #ifdef CONFIG_ARCH_AT91RM9200 +extern int rm9200_type; +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) +#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) +#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) #else #define cpu_is_at91rm9200() (0) +#define cpu_is_at91rm9200_bga() (0) +#define cpu_is_at91rm9200_pqfp() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9260 -- cgit v0.10.2 From 7a2207a0e1142a9b214b323e43ab2ecc592e5b0e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 17 May 2011 20:51:14 +0800 Subject: at91: drop at572d940hf support no-one use it and it's nearly impossible get a board to work on it and the Mainline implementation was never finished Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez Cc: Andrew Victor diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig deleted file mode 100644 index 1b1158a..0000000 --- a/arch/arm/configs/at572d940hfek_defconfig +++ /dev/null @@ -1,358 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-AT572D940HF" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_AUDIT=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT572D940HF=y -CONFIG_MACH_AT572D940HFEB=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_NET_TCPPROBE=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_VCAN=m -CONFIG_CAN_DEBUG_DEVICES=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CONNECTOR=m -CONFIG_MTD=m -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=m -CONFIG_MTD_M25P80=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_BLOCK2MTD=m -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ALAUDA=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=m -CONFIG_SENSORS_TSL2550=m -CONFIG_DS1682=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -CONFIG_PHYLIB=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_N_HDLC=m -CONFIG_SPECIALIX=m -CONFIG_STALDRV=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_R3964=m -CONFIG_RAW_DRIVER=m -CONFIG_TCG_TPM=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=m -CONFIG_SPI_SPIDEV=m -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_PCM_OSS_PLUGINS is not set -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_HID=m -CONFIG_HIDRAW=y -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_SERIAL=m -CONFIG_USB_EZUSB=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_DEBUG=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_MMC=y -CONFIG_SDIO_UART=m -CONFIG_MMC_AT91=m -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1305=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD_DEBUG=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_CHECK=y -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_CRAMFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -CONFIG_SGI_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 8cbc3aa..2248467 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -82,11 +82,6 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB -config ARCH_AT572D940HF - bool "AT572D940HF" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -431,22 +426,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT572D940HF - -comment "AT572D940HF Board Type" - -config MACH_AT572D940HFEB - bool "AT572D940HF-EK" - depends on ARCH_AT572D940HF - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT572D940HF-EK evaluation kit. - - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a83835e..9696623 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -# AT572D940HF board-specific support -obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c deleted file mode 100644 index d069907..0000000 --- a/arch/arm/mach-at91/at572d940hf.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf.c - * - * Antonio R. Costa - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include - -#include -#include -#include -#include -#include -#include - -#include "generic.h" -#include "clock.h" - -static struct map_desc at572d940hf_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE, - .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE), - .length = AT572D940HF_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "macb_clk", - .pmc_mask = 1 << AT572D940HF_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT572D940HF_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT572D940HF_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT572D940HF_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT572D940HF_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT572D940HF_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT572D940HF_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc3_clk = { - .name = "ssc3_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can0_clk = { - .name = "can0_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can1_clk = { - .name = "can1_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mAgicV_clk = { - .name = "mAgicV_clk", - .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0, - .type = CLK_TYPE_PERIPHERAL, -}; - - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &macb_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi0_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &ssc3_clk, - &twi1_clk, - &can0_clk, - &can1_clk, - &mAgicV_clk, - /* irq0 .. irq2 */ -}; - -static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The five programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static struct clk mAgicV_mem_clk = { - .name = "mAgicV_mem_clk", - .pmc_mask = AT91_PMC_PCK4, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 4, -}; - -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - -static void __init at572d940hf_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); - clk_register(&mAgicV_mem_clk); - - clk_register(&hck0); - clk_register(&hck1); -} - -static struct clk_lookup console_clock_lookup; - -void __init at572d940hf_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at572d940hf_gpio[] = { - { - .id = AT572D940HF_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, - }, { - .id = AT572D940HF_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, - }, { - .id = AT572D940HF_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, - } -}; - -static void at572d940hf_reset(void) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - - -/* -------------------------------------------------------------------- - * AT572D940HF processor initialization - * -------------------------------------------------------------------- */ - -void __init at572d940hf_map_io(void) -{ - /* Map peripherals */ - iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc)); -} - -void __init at572d940hf_initialize(unsigned long main_clock) -{ - at91_arch_reset = at572d940hf_reset; - at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1) - | (1 << AT572D940HF_ID_IRQ2); - - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at572d940hf_register_clocks(); - - /* Register GPIO subsystem */ - at91_gpio_init(at572d940hf_gpio, 3); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 3, /* Ethernet */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface 0 */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 3, /* USB Host port */ - 3, /* Serial Synchronous Controller 3 */ - 0, /* Two-Wire Interface 1 */ - 0, /* CAN Controller 0 */ - 0, /* CAN Controller 1 */ - 0, /* mAgicV HALT line */ - 0, /* mAgicV SIRQ0 line */ - 0, /* mAgicV exception line */ - 0, /* mAgicV end of DMA line */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at572d940hf_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c deleted file mode 100644 index 14863b8..0000000 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ /dev/null @@ -1,964 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf_devices.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa - * Copyright (C) 2005 Thibaut VARENE - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -#include "generic.h" -#include "sam9_smc.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT572D940HF_UHP_BASE, - .end = AT572D940HF_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UHP, - .end = AT572D940HF_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - if (!data) - return; - - usbh_data = *data; - platform_device_register(&at572d940hf_usbh_device); - -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_USB_GADGET_AT91 -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_UDP, - .end = AT572D940HF_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UDP, - .end = AT572D940HF_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (data->vbus_pin) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally */ - - udc_data = *data; - platform_device_register(&at572d940hf_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT572D940HF_BASE_EMAC, - .end = AT572D940HF_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_EMAC, - .end = AT572D940HF_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct at91_eth_data *data) -{ - if (!data) - return; - - if (data->phy_irq_pin) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Only RMII is supported */ - data->is_rmii = 1; - - /* Pins used for RMII */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */ - - eth_data = *data; - platform_device_register(&at572d940hf_eth_device); -} -#else -void __init at91_add_device_eth(struct at91_eth_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_MCI, - .end = AT572D940HF_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_MCI, - .end = AT572D940HF_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (data->det_pin) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (data->wp_pin) - at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PC22, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PC23, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PC24, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PC25, 1); - at91_set_A_periph(AT91_PIN_PC26, 1); - at91_set_A_periph(AT91_PIN_PC27, 1); - } - - mmc_data = *data; - platform_device_register(&at572d940hf_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (data->enable_pin) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (data->rdy_pin) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (data->det_pin) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */ - at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&at572d940hf_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ - -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PC7, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PC8, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at572d940hf_twi_device { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI0, - .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI0, - .end = AT572D940HF_ID_TWI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi0_device = { - .name = "at91_i2c", - .id = 0, - .resource = twi0_resources, - .num_resources = ARRAY_SIZE(twi0_resources), -}; - -static struct resource twi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI1, - .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI1, - .end = AT572D940HF_ID_TWI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi1_device = { - .name = "at91_i2c", - .id = 1, - .resource = twi1_resources, - .num_resources = ARRAY_SIZE(twi1_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI0 interface */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - /* pins used for TWI1 interface */ - at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC20, 1); - - at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC21, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi0_device); - platform_device_register(&at572d940hf_twi1_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI0, - .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI0, - .end = AT572D940HF_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI1, - .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI1, - .end = AT572D940HF_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at572d940hf_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ - - platform_device_register(&at572d940hf_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TCB, - .end = AT572D940HF_BASE_TCB + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TC0, - .end = AT572D940HF_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AT572D940HF_ID_TC1, - .end = AT572D940HF_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = AT572D940HF_ID_TC2, - .end = AT572D940HF_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at572d940hf_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at572d940hf_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct platform_device at572d940hf_wdt_device = { - .name = "at91_wdt", - .id = -1, - .num_resources = 0, -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at572d940hf_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US0, - .end = AT572D940HF_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US0, - .end = AT572D940HF_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US1, - .end = AT572D940HF_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US1, - .end = AT572D940HF_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US2, - .end = AT572D940HF_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US2, - .end = AT572D940HF_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at572d940hf_dbgu_device; - configure_dbgu_pins(); - break; - case AT572D940HF_ID_US0: - pdev = &at572d940hf_uart0_device; - configure_usart0_pins(pins); - break; - case AT572D940HF_ID_US1: - pdev = &at572d940hf_uart1_device; - configure_usart1_pins(pins); - break; - case AT572D940HF_ID_US2: - pdev = &at572d940hf_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at572d940hf_set_console_clock(portnr); - } -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- - * mAgic - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_MAGICV -static struct resource mAgic_resources[] = { - { - .start = AT91_MAGIC_PM_BASE, - .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_I_BASE, - .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_F_BASE, - .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_DB_BASE, - .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_REGS_BASE, - .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_EXTPAGE_BASE, - .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT572D940HF_ID_MSIRQ0, - .end = AT572D940HF_ID_MSIRQ0, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MHALT, - .end = AT572D940HF_ID_MHALT, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEXC, - .end = AT572D940HF_ID_MEXC, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEDMA, - .end = AT572D940HF_ID_MEDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mAgic_device = { - .name = "mAgic", - .id = -1, - .num_resources = ARRAY_SIZE(mAgic_resources), - .resource = mAgic_resources, -}; - -void __init at91_add_device_mAgic(void) -{ - platform_device_register(&mAgic_device); -} -#else -void __init at91_add_device_mAgic(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c deleted file mode 100644 index dfa896d..0000000 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ /dev/null @@ -1,323 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-at572d940hf_ek.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init eb_init_early(void) -{ - /* Initialize processor: 12.500 MHz crystal */ - at572d940hf_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US0, 1, 0); - - /* USART1 on ttyS2. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US1, 2, 0); - - /* USART2 on ttyS3. (Tx & Rx only */ - at91_register_uart(AT572D940HF_ID_US2, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init eb_init_irq(void) -{ - at572d940hf_init_interrupts(NULL); -} - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata eb_usbh_data = { - .ports = 2, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata eb_udc_data = { - .vbus_pin = 0, /* no VBUS detection,UDC always on */ - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata eb_mmc_data = { - .wire4 = 1, -/* .det_pin = ... not connected */ -/* .wp_pin = ... not connected */ -/* .vcc_pin = ... not connected */ -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata eb_eth_data = { - .phy_irq_pin = AT91_PIN_PB25, - .is_rmii = 1, -}; - -/* - * NOR flash - */ - -static struct mtd_partition eb_nor_partitions[] = { - { - .name = "Raw Environment", - .offset = 0, - .size = SZ_4M, - .mask_flags = 0, - }, - { - .name = "OS FS", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - .mask_flags = 0, - }, - { - .name = "APP FS", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static void nor_flash_set_vpp(struct map_info* mi, int i) { -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 4, - .parts = eb_nor_partitions, - .nr_parts = ARRAY_SIZE(eb_nor_partitions), - .set_vpp = nor_flash_set_vpp, -}; - -static struct resource nor_flash_resources[] = { - { - .start = AT91_CHIPSELECT_0, - .end = AT91_CHIPSELECT_0 + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata eb_nor_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 1, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 7, - .nrd_pulse = 7, - .ncs_write_pulse = 7, - .nwe_pulse = 7, - - .read_cycle = 9, - .write_cycle = 9, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32, - .tdf_cycles = 1, -}; - -static void __init eb_add_device_nor(void) -{ - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &eb_nor_smc_config); - platform_device_register(&nor_flash); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata eb_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(eb_nand_partition); - return eb_nand_partition; -} - -static struct atmel_nand_data __initdata eb_nand_data = { - .ale = 22, - .cle = 21, -/* .det_pin = ... not connected */ -/* .rdy_pin = AT91_PIN_PC16, */ - .enable_pin = AT91_PIN_PA15, - .partition_info = nand_partitions, -}; - -static struct sam9_smc_config __initdata eb_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 12, -}; - -static void __init eb_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); - /* setup bus-width (8 or 16) */ - if (eb_nand_data.bus_width_16) - eb_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - eb_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &eb_nand_smc_config); - - at91_add_device_nand(&eb_nand_data); -} - - -/* - * SPI devices - */ -static struct resource rtc_resources[] = { - [0] = { - .start = AT572D940HF_ID_IRQ1, - .end = AT572D940HF_ID_IRQ1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ds1305_platform_data ds1306_data = { - .is_ds1306 = true, - .en_1hz = false, -}; - -static struct spi_board_info eb_spi_devices[] = { - { /* RTC Dallas DS1306 */ - .modalias = "rtc-ds1305", - .chip_select = 3, - .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA, - .max_speed_hz = 500000, - .bus_num = 0, - .irq = AT572D940HF_ID_IRQ1, - .platform_data = (void *) &ds1306_data, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* Dataflash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - -static void __init eb_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&eb_usbh_data); - /* USB Device */ - at91_add_device_udc(&eb_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NOR */ - eb_add_device_nor(); - /* NAND */ - eb_add_device_nand(); - /* SPI */ - at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices)); - /* MMC */ - at91_add_device_mmc(0, &eb_mmc_data); - /* Ethernet */ - at91_add_device_eth(&eb_eth_data); - /* mAgic */ - at91_add_device_mAgic(); -} - -MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") - /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, - .map_io = at572d940hf_map_io, - .init_early = eb_init_early, - .init_irq = eb_init_irq, - .init_machine = eb_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index ac103cb..61873f3 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -599,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || - cpu_is_at91sam9g10() || cpu_is_at572d940hf()) { + cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } else if (cpu_is_at91cap9()) { diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 5783bd1..8ff3418 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -19,7 +19,6 @@ extern void __init at91sam9rl_map_io(void); extern void __init at91sam9g45_map_io(void); extern void __init at91x40_map_io(void); extern void __init at91cap9_map_io(void); -extern void __init at572d940hf_map_io(void); /* Processors */ extern void __init at91rm9200_set_type(int type); @@ -31,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock); extern void __init at91sam9g45_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); extern void __init at91cap9_initialize(unsigned long main_clock); -extern void __init at572d940hf_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); @@ -42,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91cap9_init_interrupts(unsigned int priority[]); -extern void __init at572d940hf_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -65,7 +62,6 @@ extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); extern void __init at91cap9_set_console_clock(int id); -extern void __init at572d940hf_set_console_clock(int id); struct device; /* Power Management */ diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h deleted file mode 100644 index a738dc7..0000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * include/mach/at572d940hf.h - * - * Antonio R. Costa - * Copyright (C) 2008 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef AT572D940HF_H -#define AT572D940HF_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */ -#define AT572D940HF_ID_US0 6 /* USART 0 */ -#define AT572D940HF_ID_US1 7 /* USART 1 */ -#define AT572D940HF_ID_US2 8 /* USART 2 */ -#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */ -#define AT572D940HF_ID_UDP 10 /* USB Device Port */ -#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */ -#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */ -#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */ -#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */ -#define AT572D940HF_ID_UHP 20 /* USB Host port */ -#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */ -#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */ -#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */ -#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */ -#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */ -#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */ -#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */ -#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */ -#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */ -#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */ -#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT572D940HF_BASE_TCB 0xfffa0000 -#define AT572D940HF_BASE_TC0 0xfffa0000 -#define AT572D940HF_BASE_TC1 0xfffa0040 -#define AT572D940HF_BASE_TC2 0xfffa0080 -#define AT572D940HF_BASE_UDP 0xfffa4000 -#define AT572D940HF_BASE_MCI 0xfffa8000 -#define AT572D940HF_BASE_TWI0 0xfffac000 -#define AT572D940HF_BASE_US0 0xfffb0000 -#define AT572D940HF_BASE_US1 0xfffb4000 -#define AT572D940HF_BASE_US2 0xfffb8000 -#define AT572D940HF_BASE_SSC0 0xfffbc000 -#define AT572D940HF_BASE_SSC1 0xfffc0000 -#define AT572D940HF_BASE_SSC2 0xfffc4000 -#define AT572D940HF_BASE_SPI0 0xfffc8000 -#define AT572D940HF_BASE_SPI1 0xfffcc000 -#define AT572D940HF_BASE_SSC3 0xfffd0000 -#define AT572D940HF_BASE_TWI1 0xfffd4000 -#define AT572D940HF_BASE_EMAC 0xfffd8000 -#define AT572D940HF_BASE_CAN0 0xfffdc000 -#define AT572D940HF_BASE_CAN1 0xfffe0000 -#define AT91_BASE_SYS 0xffffea00 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) - -#define AT91_USART0 AT572D940HF_ID_US0 -#define AT91_USART1 AT572D940HF_ID_US1 -#define AT91_USART2 AT572D940HF_ID_US2 - - -/* - * Internal Memory. - */ -#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */ - -#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h deleted file mode 100644 index b6751df..0000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach//at572d940hf_matrix.h - * - * Antonio R. Costa - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef AT572D940HF_MATRIX_H -#define AT572D940HF_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ - -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ - -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */ -#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */ -#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */ -#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */ -#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */ -#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */ -#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */ -#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */ -#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */ -#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */ -#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */ -#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */ -#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */ -#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */ -#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */ -#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */ - - -/* - * The following registers / bits are not defined in the Datasheet (Revision A) - */ - -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index c44e94e..ed544a0 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -90,7 +90,7 @@ struct at91_eth_data { extern void __init at91_add_device_eth(struct at91_eth_data *data); #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF) + || defined(CONFIG_ARCH_AT91SAM9G45) #define eth_platform_data at91_eth_data #endif @@ -204,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); - /* AT572D940HF DSP */ -extern void __init at91_add_device_mAgic(void); - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index ab00372..df966c2 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -34,8 +34,6 @@ #define ARCH_ID_AT91SAM9XE256 0x329a93a0 #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 -#define ARCH_ID_AT572D940HF 0x0e0303e0 - #define ARCH_ID_AT91M40800 0x14080044 #define ARCH_ID_AT91R40807 0x44080746 #define ARCH_ID_AT91M40807 0x14080745 @@ -188,12 +186,6 @@ extern int rm9200_type; #define cpu_is_at91cap9_revC() (0) #endif -#ifdef CONFIG_ARCH_AT572D940HF -#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF) -#else -#define cpu_is_at572d940hf() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 469d3af..1008b9f 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -32,8 +32,6 @@ #include #elif defined(CONFIG_ARCH_AT91X40) #include -#elif defined(CONFIG_ARCH_AT572D940HF) -#include #else #error "Unsupported AT91 processor" #endif diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 05a6e8a..31ac2d9 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -82,11 +82,6 @@ #define AT91X40_MASTER_CLOCK 40000000 #define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) -#elif defined(CONFIG_ARCH_AT572D940HF) - -#define AT572D940HF_MASTER_CLOCK 80000000 -#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16) - #endif #endif -- cgit v0.10.2 From 7b7bf499f79de3f6c85a340c8453a78789523f85 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 19 May 2011 13:21:14 +0100 Subject: ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM In commit eb33575c ("[ARM] Double check memmap is actually valid with a memmap has unexpected holes V2"), a new function, memmap_valid_within, was introduced to mmzone.h so that holes in the memmap which pass pfn_valid in SPARSEMEM configurations can be detected and avoided. The fix to this problem checks that the pfn <-> page linkages are correct by calculating the page for the pfn and then checking that page_to_pfn on that page returns the original pfn. Unfortunately, in SPARSEMEM configurations, this results in reading from the page flags to determine the correct section. Since the memmap here has been freed, junk is read from memory and the check is no longer robust. In the best case, reading from /proc/pagetypeinfo will give you the wrong answer. In the worst case, you get SEGVs, Kernel OOPses and hung CPUs. Furthermore, ioremap implementations that use pfn_valid to disallow the remapping of normal memory will break. This patch allows architectures to provide their own pfn_valid function instead of using the default implementation used by sparsemem. The architecture-specific version is aware of the memmap state and will return false when passed a pfn for a freed page within a valid section. Acked-by: Mel Gorman Acked-by: Catalin Marinas Tested-by: H Hartley Sweeten Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7275009..5be55d9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1516,6 +1516,9 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_SELECT_MEMORY_MODEL def_bool ARCH_SPARSEMEM_ENABLE +config HAVE_ARCH_PFN_VALID + def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM + config HIGHMEM bool "High Memory Support" depends on MMU diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index f51a695..ac75d08 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -197,7 +197,7 @@ typedef unsigned long pgprot_t; typedef struct page *pgtable_t; -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID extern int pfn_valid(unsigned long); #endif diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 3f17ea1..bbc3346 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -273,13 +273,15 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, free_area_init_node(0, zone_size, min, zhole_size); } -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { return memblock_is_memory(pfn << PAGE_SHIFT); } EXPORT_SYMBOL(pfn_valid); +#endif +#ifndef CONFIG_SPARSEMEM static void arm_memory_present(void) { } diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 217bcf6..261f299 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -1056,12 +1056,14 @@ static inline struct mem_section *__pfn_to_section(unsigned long pfn) return __nr_to_section(pfn_to_section_nr(pfn)); } +#ifndef CONFIG_HAVE_ARCH_PFN_VALID static inline int pfn_valid(unsigned long pfn) { if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS) return 0; return valid_section(__nr_to_section(pfn_to_section_nr(pfn))); } +#endif static inline int pfn_present(unsigned long pfn) { -- cgit v0.10.2 From 40f7bfe4f1c2761abeceb3b2b9dc1feec3c47ed9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 19 May 2011 13:22:48 +0100 Subject: ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM sanity_check_meminfo walks over the registered memory banks and attempts to split banks across lowmem and highmem when they would otherwise overlap with the vmalloc space. When SPARSEMEM is used, there are two potential problems that occur when the virtual address of the start of a bank is equal to vmalloc_min. 1.) The end of lowmem is calculated as __pa(vmalloc_min - 1) + 1. In the above scenario, this will give the end address of the previous bank, rather than the actual bank we are interested in. This value is later used as the memblock limit and artificially restricts the total amount of available memory. 2.) The checks to determine whether or not a bank belongs to highmem or not only check if __va(bank->start) is greater or less than vmalloc_min. In the case that it is equal, the bank is incorrectly treated as lowmem, which hoses the vmalloc area. This patch fixes these two problems by checking whether the virtual start address of a bank is >= vmalloc_min and then calculating lowmem_end by finding the virtual end address of the highest lowmem bank. Acked-by: Catalin Marinas Reviewed-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 08a9236..9d9e736 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -763,15 +763,12 @@ static void __init sanity_check_meminfo(void) { int i, j, highmem = 0; - lowmem_limit = __pa(vmalloc_min - 1) + 1; - memblock_set_current_limit(lowmem_limit); - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM - if (__va(bank->start) > vmalloc_min || + if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) highmem = 1; @@ -829,6 +826,9 @@ static void __init sanity_check_meminfo(void) bank->size = newsize; } #endif + if (!bank->highmem && bank->start + bank->size > lowmem_limit) + lowmem_limit = bank->start + bank->size; + j++; } #ifdef CONFIG_HIGHMEM @@ -852,6 +852,7 @@ static void __init sanity_check_meminfo(void) } #endif meminfo.nr_banks = j; + memblock_set_current_limit(lowmem_limit); } static inline void prepare_page_table(void) -- cgit v0.10.2 From fbb9e0b6e7d534b5d9e3c3eddb68b62d26ddb731 Mon Sep 17 00:00:00 2001 From: Jeffrey Ohlstein Date: Mon, 4 Apr 2011 21:08:25 +0100 Subject: ARM: 6863/1: allow hotplug on msm Hotplug support was added in 9f1890a (msm: hotplug: support cpu hotplug on msm, 2010-12-02) Signed-off-by: Jeff Ohlstein Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5be55d9..abbd829 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1399,7 +1399,6 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL - depends on !ARCH_MSM help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. -- cgit v0.10.2 From a85fab1c795c88675ba3e23e68d821c57e9920fc Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 26 May 2011 12:12:13 +0100 Subject: ARM: add sendmmsg syscall Commit 228e548e (net: Add sendmmsg socket system call) added the new sendmmsg syscall. Add this to the syscall table for ARM. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 87dbe3e..3de689a 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -400,6 +400,7 @@ #define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) #define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) #define __NR_syncfs (__NR_SYSCALL_BASE+373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 7fbf28c..24cdac3 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -383,6 +383,7 @@ CALL(sys_open_by_handle_at) CALL(sys_clock_adjtime) CALL(sys_syncfs) + CALL(sys_sendmmsg) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v0.10.2 From a248b13b21ae00b97638b4f435c8df3075808b5d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 26 May 2011 11:20:19 +0100 Subject: ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area The v6 and v7 implementations of flush_kern_dcache_area do not align the passed MVA to the size of a cacheline in the data cache. If a misaligned address is used, only a subset of the requested area will be flushed. This has been observed to cause failures in SMP boot where the secondary_data initialised by the primary CPU is not cacheline aligned, causing the secondary CPUs to read incorrect values for their pgd and stack pointers. This patch ensures that the base address is cacheline aligned before flushing the d-cache. Cc: Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index c96fa1b..73b4a8b 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -176,6 +176,7 @@ ENDPROC(v6_coherent_kern_range) */ ENTRY(v6_flush_kern_dcache_area) add r1, r0, r1 + bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index dc18d81..d32f02b 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -221,6 +221,8 @@ ENDPROC(v7_coherent_user_range) ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 add r1, r0, r1 + sub r3, r2, #1 + bic r0, r0, r3 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 -- cgit v0.10.2 From d427958a46af24f75d0017c45eadd172273bbf33 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 26 May 2011 11:22:44 +0100 Subject: ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7 This patch makes TTBR1 point to swapper_pg_dir so that global, kernel mappings can be used exclusively on v6 and v7 cores where they are needed. Signed-off-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index d2b514f..e42d96a 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -70,6 +70,7 @@ extern void platform_smp_prepare_cpus(unsigned int); */ struct secondary_data { unsigned long pgdir; + unsigned long swapper_pg_dir; void *stack; }; extern struct secondary_data secondary_data; diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c9173cf..8224b1d 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -113,6 +113,7 @@ ENTRY(stext) ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled adr lr, BSYM(1f) @ return (PIC) address + mov r8, r4 @ set TTBR1 to swapper_pg_dir ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) @@ -302,8 +303,10 @@ ENTRY(secondary_startup) */ adr r4, __secondary_data ldmia r4, {r5, r7, r12} @ address to jump to after - sub r4, r4, r5 @ mmu has been enabled - ldr r4, [r7, r4] @ get secondary_data.pgdir + sub lr, r4, r5 @ mmu has been enabled + ldr r4, [r7, lr] @ get secondary_data.pgdir + add r7, r7, #4 + ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir adr lr, BSYM(__enable_mmu) @ return address mov r13, r12 @ __secondary_switched address ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d439a8f..344e52b 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -105,6 +105,7 @@ int __cpuinit __cpu_up(unsigned int cpu) */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; secondary_data.pgdir = virt_to_phys(pgd); + secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir); __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index ab17cc0..1d2b845 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -213,7 +213,9 @@ __v6_setup: mcr p15, 0, r0, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval ldmia r5, {r5, r6} diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index babfba0..3c38678 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -368,7 +368,9 @@ __v7_setup: mcr p15, 0, r10, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 ldr r5, =PRRR @ PRRR ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR -- cgit v0.10.2 From 52af9c6cd863fe37d1103035ec7ee22ac1296458 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 26 May 2011 11:23:43 +0100 Subject: ARM: 6943/1: mm: use TTBR1 instead of reserved context ID On ARMv7 CPUs that cache first level page table entries (like the Cortex-A15), using a reserved ASID while changing the TTBR or flushing the TLB is unsafe. This is because the CPU may cache the first level entry as the result of a speculative memory access while the reserved ASID is assigned. After the process owning the page tables dies, the memory will be reallocated and may be written with junk values which can be interpreted as global, valid PTEs by the processor. This will result in the TLB being populated with bogus global entries. This patch avoids the use of a reserved context ID in the v7 switch_mm and ASID rollover code by temporarily using the swapper_pg_dir pointed at by TTBR1, which contains only global entries that are not tagged with ASIDs. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b0ee9ba..0d86298 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -24,9 +24,7 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); /* * We fork()ed a process, and we need a new context for the child - * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. The ASID 0 is reserved for the TTBR - * register changing sequence. + * to run in. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -36,8 +34,11 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { - /* set the reserved ASID before flushing the TLB */ - asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); + u32 ttb; + /* Copy TTBR1 into TTBR0 */ + asm volatile("mrc p15, 0, %0, c2, c0, 1\n" + "mcr p15, 0, %0, c2, c0, 0" + : "=r" (ttb)); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3c38678..b3b566e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -108,18 +108,16 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif -#ifdef CONFIG_ARM_ERRATA_754322 - dsb -#endif - mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID - isb -1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + mrc p15, 0, r2, c2, c0, 1 @ load TTB 1 + mcr p15, 0, r2, c2, c0, 0 @ into TTB 0 isb #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID isb + mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + isb #endif mov pc, lr ENDPROC(cpu_v7_switch_mm) -- cgit v0.10.2 From 45b95235b0ac86cef2ad4480b0618b8778847479 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 26 May 2011 11:24:25 +0100 Subject: ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks Now that ASID 0 is no longer used as a reserved value, allow it to be allocated to tasks. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 0d86298..8bfae96 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -94,7 +94,7 @@ static void reset_context(void *info) return; smp_rmb(); - asid = cpu_last_asid + cpu + 1; + asid = cpu_last_asid + cpu; flush_context(); set_mm_context(mm, asid); @@ -144,13 +144,13 @@ void __new_context(struct mm_struct *mm) * to start a new version and flush the TLB. */ if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id() + 1; + asid = cpu_last_asid + smp_processor_id(); flush_context(); #ifdef CONFIG_SMP smp_wmb(); smp_call_function(reset_context, NULL, 1); #endif - cpu_last_asid += NR_CPUS; + cpu_last_asid += NR_CPUS - 1; } set_mm_context(mm, asid); -- cgit v0.10.2 From 81479c246c07b703aeb4bf54933b7d928cb5b717 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Fri, 27 May 2011 17:23:16 +0100 Subject: ARM: 6945/1: Add unwinding support for division functions The software division functions never had unwinding annotations added. Currently, when a division by zero occurs the backtrace shown will stop at Ldiv0 or some completely unrelated function. Add unwinding annotations in hopes of getting a more useful backtrace when a division by zero occurs. Signed-off-by: Laura Abbott Acked-by: Dave Martin Signed-off-by: Russell King diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 6dc0648..c562f64 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -35,7 +35,7 @@ Boston, MA 02111-1307, USA. */ #include #include - +#include .macro ARM_DIV_BODY dividend, divisor, result, curbit @@ -207,6 +207,7 @@ Boston, MA 02111-1307, USA. */ ENTRY(__udivsi3) ENTRY(__aeabi_uidiv) +UNWIND(.fnstart) subs r2, r1, #1 moveq pc, lr @@ -230,10 +231,12 @@ ENTRY(__aeabi_uidiv) mov r0, r0, lsr r2 mov pc, lr +UNWIND(.fnend) ENDPROC(__udivsi3) ENDPROC(__aeabi_uidiv) ENTRY(__umodsi3) +UNWIND(.fnstart) subs r2, r1, #1 @ compare divisor with 1 bcc Ldiv0 @@ -247,10 +250,12 @@ ENTRY(__umodsi3) mov pc, lr +UNWIND(.fnend) ENDPROC(__umodsi3) ENTRY(__divsi3) ENTRY(__aeabi_idiv) +UNWIND(.fnstart) cmp r1, #0 eor ip, r0, r1 @ save the sign of the result. @@ -287,10 +292,12 @@ ENTRY(__aeabi_idiv) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__divsi3) ENDPROC(__aeabi_idiv) ENTRY(__modsi3) +UNWIND(.fnstart) cmp r1, #0 beq Ldiv0 @@ -310,11 +317,14 @@ ENTRY(__modsi3) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__modsi3) #ifdef CONFIG_AEABI ENTRY(__aeabi_uidivmod) +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_uidiv @@ -323,10 +333,12 @@ ENTRY(__aeabi_uidivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) ENTRY(__aeabi_idivmod) - +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_idiv ldmfd sp!, {r1, r2, ip, lr} @@ -334,15 +346,18 @@ ENTRY(__aeabi_idivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_idivmod) #endif Ldiv0: - +UNWIND(.fnstart) +UNWIND(.pad #4) +UNWIND(.save {lr}) str lr, [sp, #-8]! bl __div0 mov r0, #0 @ About as wrong as it could be. ldr pc, [sp], #8 - - +UNWIND(.fnend) +ENDPROC(Ldiv0) -- cgit v0.10.2