/* * Device Tree file for Globalscale Mirabox * * Gregory CLEMENT * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ /dts-v1/; /include/ "armada-370.dtsi" / { model = "Globalscale Mirabox"; compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; }; memory { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; soc { serial@d0012000 { clock-frequency = <200000000>; status = "okay"; }; timer@d0020300 { clock-frequency = <600000000>; status = "okay"; }; pinctrl { pwr_led_pin: pwr-led-pin { marvell,pins = "mpp63"; marvell,function = "gpo"; }; stat_led_pins: stat-led-pins { marvell,pins = "mpp64", "mpp65"; marvell,function = "gpio"; }; }; gpio_leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pwr_led_pin &stat_led_pins>; green_pwr_led { label = "mirabox:green:pwr"; gpios = <&gpio1 31 1>; linux,default-trigger = "heartbeat"; }; blue_stat_led { label = "mirabox:blue:stat"; gpios = <&gpio2 0 1>; linux,default-trigger = "cpu0"; }; green_stat_led { label = "mirabox:green:stat"; gpios = <&gpio2 1 1>; default-state = "off"; }; }; mdio { phy0: ethernet-phy@0 { reg = <0>; }; phy1: ethernet-phy@1 { reg = <1>; }; }; ethernet@d0070000 { status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@d0074000 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; }; mvsdio@d00d4000 { pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; status = "okay"; /* * No CD or WP GPIOs: SDIO interface used for * Wifi/Bluetooth chip */ }; usb@d0050000 { status = "okay"; }; usb@d0051000 { status = "okay"; }; i2c@d0011000 { status = "okay"; clock-frequency = <100000>; pca9505: pca9505@25 { compatible = "nxp,pca9505"; gpio-controller; #gpio-cells = <2>; reg = <0x25>; }; }; pcie-controller { status = "okay"; /* Internal mini-PCIe connector */ pcie@1,0 { /* Port 0, Lane 0 */ status = "okay"; }; /* Connected on the PCB to a USB 3.0 XHCI controller */ pcie@2,0 { /* Port 1, Lane 0 */ status = "okay"; }; }; }; };