config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR if !ZBOOT_ROM select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF help Support for Freescale MXC/iMX-based family of processors menu "Freescale i.MX support" depends on ARCH_MXC config MXC_IRQ_PRIOR bool "Use IRQ priority" help Select this if you want to use prioritized IRQ handling. This feature prevents higher priority ISR to be interrupted by lower priority IRQ even IRQF_DISABLED flag is not set. This may be useful in embedded applications, where are strong requirements for timing. Say N here, unless you have a specialized requirement. config MXC_TZIC bool config MXC_AVIC bool config MXC_DEBUG_BOARD bool "Enable MXC debug board(for 3-stack)" help The debug board is an integral part of the MXC 3-stack(PDK) platforms, it can be attached or removed from the peripheral board. On debug board, several debug devices(ethernet, UART, buttons, LEDs and JTAG) are implemented. Between the MCU and these devices, a CPLD is added as a bridge which performs data/address de-multiplexing and decode, signal level shift, interrupt control and various board functions. config HAVE_EPIT bool config MXC_USE_EPIT bool "Use EPIT instead of GPT" depends on HAVE_EPIT help Use EPIT as the system timer on systems that have it. Normally you don't have a reason to do so as the EPIT has the same features and uses the same clocks as the GPT. Anyway, on some systems the GPT may be in use for other purposes. config ARCH_HAS_RNGA bool config HAVE_IMX_ANATOP bool config HAVE_IMX_GPC bool config HAVE_IMX_MMDC bool config HAVE_IMX_SRC def_bool y if SMP select ARCH_HAS_RESET_CONTROLLER config IMX_HAVE_IOMUX_V1 bool config ARCH_MXC_IOMUX_V3 bool config ARCH_MX1 bool config ARCH_MX25 bool config MACH_MX27 bool config SOC_IMX1 bool select ARCH_MX1 select COMMON_CLK select CPU_ARM920T select IMX_HAVE_IOMUX_V1 select MXC_AVIC config SOC_IMX21 bool select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC config SOC_IMX25 bool select ARCH_MX25 select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_ARM926T select MXC_AVIC config SOC_IMX27 bool select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MACH_MX27 select MXC_AVIC config SOC_IMX31 bool select COMMON_CLK select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select MXC_AVIC select SMP_ON_UP if SMP config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_V6K select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP config SOC_IMX5 bool select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_V7 select MXC_TZIC config SOC_IMX51 bool select HAVE_IMX_SRC select PINCTRL select PINCTRL_IMX51 select SOC_IMX5 if ARCH_MULTI_V4T comment "MX1 platforms:" config MACH_MXLADS bool config ARCH_MX1ADS bool "MX1ADS platform" select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select MACH_MXLADS select SOC_IMX1 help Say Y here if you are using Motorola MX1ADS/MXLADS boards config MACH_SCB9328 bool "Synertronixx scb9328" select IMX_HAVE_PLATFORM_IMX_UART select SOC_IMX1 help Say Y here if you are using a Synertronixx scb9328 board config MACH_APF9328 bool "APF9328" select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select SOC_IMX1 help Say Yes here if you are using the Armadeus APF9328 development board endif if ARCH_MULTI_V5 comment "MX21 platforms:" config MACH_MX21ADS bool "MX21ADS platform" select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select SOC_IMX21 help Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. comment "MX25 platforms:" config MACH_MX25_3DS bool "Support MX25PDK (3DS) Platform" select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select SOC_IMX25 config MACH_EUKREA_CPUIMX25SD bool "Support Eukrea CPUIMX25 Platform" select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX25 choice prompt "Baseboard" depends on MACH_EUKREA_CPUIMX25SD default MACH_EUKREA_MBIMXSD25_BASEBOARD config MACH_EUKREA_MBIMXSD25_BASEBOARD bool "Eukrea MBIMXSD development board" select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. endchoice config MACH_IMX25_DT bool "Support i.MX25 platforms from device tree" select SOC_IMX25 help Include support for Freescale i.MX25 based platforms using the device tree for discovery comment "MX27 platforms:" config MACH_MX27ADS bool "MX27ADS platform" select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select SOC_IMX27 help Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. config MACH_PCM038 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for phyCORE-i.MX27 (aka pcm038) platform. This includes specific configurations for the module and its peripherals. choice prompt "Baseboard" depends on MACH_PCM038 default MACH_PCM970_BASEBOARD config MACH_PCM970_BASEBOARD bool "PHYTEC PCM970 development board" select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_MXC_MMC help This adds board specific devices that can be found on Phytec's PCM970 evaluation board. endchoice config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for Eukrea CPUIMX27 platform. This includes specific configurations for the module and its peripherals. config MACH_EUKREA_CPUIMX27_USESDHC2 bool "CPUIMX27 integrates SDHC2 module" depends on MACH_CPUIMX27 select IMX_HAVE_PLATFORM_MXC_MMC help This adds support for the internal SDHC2 used on CPUIMX27 for wifi or eMMC. config MACH_EUKREA_CPUIMX27_USEUART4 bool "CPUIMX27 integrates UART4 module" depends on MACH_CPUIMX27 help This adds support for the internal UART4 used on CPUIMX27 for bluetooth. choice prompt "Baseboard" depends on MACH_CPUIMX27 default MACH_EUKREA_MBIMX27_BASEBOARD config MACH_EUKREA_MBIMX27_BASEBOARD bool "Eukrea MBIMX27 development board" select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMX27 evaluation board. endchoice config MACH_MX27_3DS bool "MX27PDK platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. config MACH_IMX27_VISSTRIM_M10 bool "Vista Silicon i.MX27 Visstrim_m10" select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MX2_EMMA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select LEDS_GPIO_REGISTER select SOC_IMX27 help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its peripherals. config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select SOC_IMX27 help Include support for MX27 LITEKIT platform. This includes specific configurations for the board and its peripherals. config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select IMX_HAVE_PLATFORM_SPI_IMX select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX27 help Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. config MACH_MXT_TD60 bool "Maxtrack i-MXT TD60" select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select SOC_IMX27 help Include support for i-MXT (aka td60) platform. This includes specific configurations for the module and its peripherals. config MACH_IMX27IPCAM bool "IMX27 IPCAM platform" select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select SOC_IMX27 help Include support for IMX27 IPCAM platform. This includes specific configurations for the board and its peripherals. config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27 help Include support for Freescale i.MX27 based platforms using the device tree for discovery endif if ARCH_MULTI_V6 comment "MX31 platforms:" config MACH_MX31ADS bool "Support MX31ADS platforms" default y select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select SOC_IMX31 help Include support for MX31ADS platform. This includes specific configurations for the board and its peripherals. config MACH_MX31ADS_WM1133_EV1 bool "Support Wolfson Microelectronics 1133-EV1 module" depends on MACH_MX31ADS depends on MFD_WM8350_I2C depends on REGULATOR_WM8350 = y help Include support for the Wolfson Microelectronics 1133-EV1 PMU and audio module for the MX31ADS platform. config MACH_MX31LILLY bool "Support MX31 LILLY-1131 platforms (INCO startec)" select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for mx31 based LILLY1131 modules. This includes specific configurations for the board and its peripherals. config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_W1 select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. config MACH_PCM037_EET bool "Support pcm037 EET board extensions" depends on MACH_PCM037 select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_SPI_IMX help Add support for PCM037 EET baseboard extensions. If you are using the OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel command-line parameter. config MACH_MX31_3DS bool "Support MX31PDK (3DS)" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. config MACH_MX31_3DS_MXC_NAND_USE_BBT bool "Make the MXC NAND driver use the in flash Bad Block Table" depends on MACH_MX31_3DS depends on MTD_NAND_MXC help Enable this if you want that the MXC NAND driver uses the in flash Bad Block Table to know what blocks are bad instead of scanning the entire flash looking for bad block markers. config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for mx31moboard platform. This includes specific configurations for the board and its peripherals. config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select SOC_IMX31 help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. config MACH_ARMADILLO5X0 bool "Support Atmark Armadillo-500 Development Base Board" select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX31 help Include support for Atmark Armadillo-500 platform. This includes specific configurations for the board and its peripherals. config MACH_KZM_ARM11_01 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" select IMX_HAVE_PLATFORM_IMX_UART select SOC_IMX31 help Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. config MACH_BUG bool "Support Buglabs BUGBase platform" default y select IMX_HAVE_PLATFORM_IMX_UART select SOC_IMX31 help Include support for BUGBase 1.3 platform. This includes specific configurations for the board and its peripherals. config MACH_IMX31_DT bool "Support i.MX31 platforms from device tree" select SOC_IMX31 help Include support for Freescale i.MX31 based platforms using the device tree for discovery. comment "MX35 platforms:" config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX35 help Include support for Phytec pcm043 platform. This includes specific configurations for the board and its peripherals. config MACH_MX35_3DS bool "Support MX35PDK platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select MXC_DEBUG_BOARD select SOC_IMX35 help Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. config MACH_EUKREA_CPUIMX35SD bool "Support Eukrea CPUIMX35 Platform" select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select USB_ULPI_VIEWPORT if USB_ULPI select SOC_IMX35 help Include support for Eukrea CPUIMX35 platform. This includes specific configurations for the board and its peripherals. choice prompt "Baseboard" depends on MACH_EUKREA_CPUIMX35SD default MACH_EUKREA_MBIMXSD35_BASEBOARD config MACH_EUKREA_MBIMXSD35_BASEBOARD bool "Eukrea MBIMXSD development board" select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. endchoice config MACH_VPR200 bool "Support VPR200 platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select SOC_IMX35 help Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. endif if ARCH_MULTI_V7 comment "i.MX51 machines:" config MACH_IMX51_DT bool "Support i.MX51 platforms from device tree" select SOC_IMX51 help Include support for Freescale i.MX51 based platforms using the device tree for discovery config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX select SOC_IMX51 help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its peripherals. config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX select SOC_IMX51 help Include support for Eukrea CPUIMX51SD platform. This includes specific configurations for the module and its peripherals. choice prompt "Baseboard" depends on MACH_EUKREA_CPUIMX51SD default MACH_EUKREA_MBIMXSD51_BASEBOARD config MACH_EUKREA_MBIMXSD51_BASEBOARD prompt "Eukrea MBIMXSD development board" bool select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. endchoice comment "Device tree only" config SOC_IMX53 bool "i.MX53 support" select HAVE_IMX_SRC select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL select PINCTRL_IMX53 select SOC_IMX5 help This enables support for Freescale i.MX53 processor. config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL select PINCTRL_IMX6Q select PL310_ERRATA_588369 if CACHE_PL310 select PL310_ERRATA_727915 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 select PM_OPP if PM help This enables support for Freescale i.MX6 Quad processor. config SOC_IMX6SL bool "i.MX6 SoloLite support" select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_GIC select CPU_V7 select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC select MFD_SYSCON select PINCTRL select PINCTRL_IMX6SL select PL310_ERRATA_588369 if CACHE_PL310 select PL310_ERRATA_727915 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 help This enables support for Freescale i.MX6 SoloLite processor. config SOC_VF610 bool "Vybrid Family VF610 support" select CPU_V7 select ARM_GIC select CLKSRC_OF select PINCTRL select PINCTRL_VF610 select VF_PIT_TIMER select PL310_ERRATA_588369 if CACHE_PL310 select PL310_ERRATA_727915 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 help This enable support for Freescale Vybrid VF610 processor. config FSL_SOC bool config SOC_LS1021A bool "Freescale LS1021A support" select CPU_V7 select ARM_GIC select CLKSRC_OF select HAVE_ARM_ARCH_TIMER select HAVE_SMP select FSL_SOC select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI select ZONE_DMA if ARM_LPAE select FSL_SLEEP_FSM if PM help This enable support for Freescale LS1021A processor. endif source "arch/arm/mach-imx/devices/Kconfig" endmenu