config AVR32 def_bool y # With EXPERT=n, we get lots of stuff automatically selected # that we usually don't need on AVR32. select EXPERT select HAVE_CLK select HAVE_OPROFILE select HAVE_KPROBES select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select GENERIC_ATOMIC64 select HARDIRQS_SW_RESEND select GENERIC_IRQ_SHOW select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_WANT_IPC_PARSE_VERSION select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_CLOCKEVENTS select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA help AVR32 is a high-performance 32-bit RISC microprocessor core, designed for cost-sensitive embedded applications, with particular emphasis on low power consumption and high code density. There is an AVR32 Linux project with a web page at http://avr32linux.org/. config GENERIC_GPIO def_bool y config STACKTRACE_SUPPORT def_bool y config LOCKDEP_SUPPORT def_bool y config TRACE_IRQFLAGS_SUPPORT def_bool y config RWSEM_GENERIC_SPINLOCK def_bool y config RWSEM_XCHGADD_ALGORITHM def_bool n config ARCH_HAS_ILOG2_U32 def_bool n config ARCH_HAS_ILOG2_U64 def_bool n config GENERIC_HWEIGHT def_bool y config GENERIC_CALIBRATE_DELAY def_bool y config GENERIC_BUG def_bool y depends on BUG source "init/Kconfig" source "kernel/Kconfig.freezer" menu "System Type and features" config SUBARCH_AVR32B bool config MMU bool config PERFORMANCE_COUNTERS bool config PLATFORM_AT32AP bool select SUBARCH_AVR32B select MMU select PERFORMANCE_COUNTERS select ARCH_REQUIRE_GPIOLIB select GENERIC_ALLOCATOR select HAVE_FB_ATMEL # # CPU types # # AP7000 derivatives config CPU_AT32AP700X bool select PLATFORM_AT32AP config CPU_AT32AP7000 bool select CPU_AT32AP700X config CPU_AT32AP7001 bool select CPU_AT32AP700X config CPU_AT32AP7002 bool select CPU_AT32AP700X # AP700X boards config BOARD_ATNGW100_COMMON bool select CPU_AT32AP7000 choice prompt "AVR32 board type" default BOARD_ATSTK1000 config BOARD_ATSTK1000 bool "ATSTK1000 evaluation board" config BOARD_ATNGW100_MKI bool "ATNGW100 Network Gateway" select BOARD_ATNGW100_COMMON config BOARD_ATNGW100_MKII bool "ATNGW100 mkII Network Gateway" select BOARD_ATNGW100_COMMON config BOARD_HAMMERHEAD bool "Hammerhead board" select CPU_AT32AP7000 select USB_ARCH_HAS_HCD help The Hammerhead platform is built around an AVR32 32-bit microcontroller from Atmel. It offers versatile peripherals, such as ethernet, usb device, usb host etc. The board also incorporates a power supply and is a Power over Ethernet (PoE) Powered Device (PD). Additionally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which will cover even the most exceptional need of memory bandwidth. Together with the onboard video decoder the board is ready for video processing. For more information see: http://www.miromico.ch/index.php/hammerhead.html config BOARD_FAVR_32 bool "Favr-32 LCD-board" select CPU_AT32AP7000 config BOARD_MERISC bool "Merisc board" select CPU_AT32AP7000 help Merisc is the family name for a range of AVR32-based boards. The boards are designed to be used in a man-machine interfacing environment, utilizing a touch-based graphical user interface. They host a vast range of I/O peripherals as well as a large SDRAM & Flash memory bank. For more information see: http://www.martinsson.se/merisc config BOARD_MIMC200 bool "MIMC200 CPU board" select CPU_AT32AP7000 endchoice source "arch/avr32/boards/atstk1000/Kconfig" source "arch/avr32/boards/atngw100/Kconfig" source "arch/avr32/boards/hammerhead/Kconfig" source "arch/avr32/boards/favr-32/Kconfig" source "arch/avr32/boards/merisc/Kconfig" choice prompt "Boot loader type" default LOADER_U_BOOT config LOADER_U_BOOT bool "U-Boot (or similar) bootloader" endchoice source "arch/avr32/mach-at32ap/Kconfig" config LOAD_ADDRESS hex default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y config ENTRY_ADDRESS hex default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y config PHYS_OFFSET hex default 0x10000000 if CPU_AT32AP700X=y source "kernel/Kconfig.preempt" config QUICKLIST def_bool y config HAVE_ARCH_BOOTMEM def_bool n config ARCH_HAVE_MEMORY_PRESENT def_bool n config NEED_NODE_MEMMAP_SIZE def_bool n config ARCH_FLATMEM_ENABLE def_bool y config ARCH_DISCONTIGMEM_ENABLE def_bool n config ARCH_SPARSEMEM_ENABLE def_bool n source "mm/Kconfig" config OWNERSHIP_TRACE bool "Ownership trace support" default y help Say Y to generate an Ownership Trace message on every context switch, enabling Nexus-compliant debuggers to keep track of the PID of the currently executing task. config NMI_DEBUGGING bool "NMI Debugging" default n help Say Y here and pass the nmi_debug command-line parameter to the kernel to turn on NMI debugging. Depending on the value of the nmi_debug option, various pieces of information will be dumped to the console when a Non-Maskable Interrupt happens. # FPU emulation goes here source "kernel/Kconfig.hz" config CMDLINE string "Default kernel command line" default "" help If you don't have a boot loader capable of passing a command line string to the kernel, you may specify one here. As a minimum, you should specify the memory size and the root device (e.g., mem=8M, root=/dev/nfs). endmenu menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE def_bool y menu "CPU Frequency scaling" source "drivers/cpufreq/Kconfig" config CPU_FREQ_AT32AP bool "CPU frequency driver for AT32AP" depends on CPU_FREQ && PLATFORM_AT32AP default n help This enables the CPU frequency driver for AT32AP processors. For details, take a look in . If in doubt, say N. endmenu endmenu menu "Bus options" config PCI bool source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" endmenu menu "Executable file formats" source "fs/Kconfig.binfmt" endmenu source "net/Kconfig" source "drivers/Kconfig" source "fs/Kconfig" source "arch/avr32/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig"