/* * T104xQDS Device Tree Source * * Copyright 2013-2014 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of Freescale Semiconductor nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation, either version 2 of that License or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ / { model = "fsl,T1040QDS"; compatible = "fsl,T1040QDS"; #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&mpic>; aliases { emi1_rgmii0 = &t1040mdio0; emi1_rgmii1 = &t1040mdio1; emi1_slot3 = &t1040mdio3; emi1_slot5 = &t1040mdio5; emi1_slot6 = &t1040mdio6; emi1_slot7 = &t1040mdio7; rgmii_phy1 = &rgmii_phy1; rgmii_phy2 = &rgmii_phy2; phy_s3_01 = &phy_s3_01; phy_s3_02 = &phy_s3_02; phy_s3_03 = &phy_s3_03; phy_s3_04 = &phy_s3_04; phy_s5_01 = &phy_s5_01; phy_s5_02 = &phy_s5_02; phy_s5_03 = &phy_s5_03; phy_s5_04 = &phy_s5_04; phy_s6_01 = &phy_s6_01; phy_s6_02 = &phy_s6_02; phy_s6_03 = &phy_s6_03; phy_s6_04 = &phy_s6_04; phy_s7_01 = &phy_s7_01; phy_s7_02 = &phy_s7_02; phy_s7_03 = &phy_s7_03; phy_s7_04 = &phy_s7_04; }; ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xff800000 0x00010000 3 0 0xf 0xffdf0000 0x00008000>; nor@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; bank-width = <2>; device-width = <1>; }; nand@2,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,ifc-nand"; reg = <0x2 0x0 0x10000>; partition@0 { /* This location must not be altered */ /* 1MB for u-boot Bootloader Image */ reg = <0x0 0x00100000>; label = "NAND U-Boot Image"; read-only; }; partition@100000 { /* 1MB for DTB Image */ reg = <0x00100000 0x00100000>; label = "NAND DTB Image"; }; partition@200000 { /* 10MB for Linux Kernel Image */ reg = <0x00200000 0x00A00000>; label = "NAND Linux Kernel Image"; }; partition@C00000 { /* 500MB for Root file System Image */ reg = <0x00c00000 0x1F400000>; label = "NAND RFS Image"; }; }; board-control@3,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,tetra-fpga", "fsl,fpga-qixis"; reg = <3 0 0x300>; ranges = <0 3 0 0x300>; mdio-mux-emi1 { compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio0>; #address-cells = <1>; #size-cells = <0>; reg = <0x54 1>; /* BRDCFG4 */ mux-mask = <0xe0>; /* EMI1 */ /* On-board RGMII1 PHY */ t1040mdio0: mdio@0 { reg = <0x00>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; rgmii_phy1: ethernet-phy@1 { /* MAC3 */ reg = <0x1>; }; }; /* On-board RGMII2 PHY */ t1040mdio1: mdio@20 { reg = <0x20>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; rgmii_phy2: ethernet-phy@2 { /* MAC4 */ reg = <0x2>; }; }; /* Slot 3 */ t1040mdio3: mdio@60 { reg = <0x60>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; phy_s3_01: ethernet-phy@1c { reg = <0x1c>; }; phy_s3_02: ethernet-phy@1d { reg = <0x1d>; }; phy_s3_03: ethernet-phy@1e { reg = <0x1e>; }; phy_s3_04: ethernet-phy@1f { reg = <0x1f>; }; }; /* Slot 5 */ t1040mdio5: mdio@a0 { reg = <0xa0>; #address-cells = <1>; #size-cells = <0>; phy_s5_01: ethernet-phy@1c { reg = <0x14>; interrupts = <1 1 0 0>; }; phy_s5_02: ethernet-phy@1d { reg = <0x15>; interrupts = <1 1 0 0>; }; phy_s5_03: ethernet-phy@1e { reg = <0x16>; interrupts = <1 1 0 0>; }; phy_s5_04: ethernet-phy@1f { reg = <0x17>; interrupts = <1 1 0 0>; }; }; /* Slot 6 */ t1040mdio6: mdio@c0 { reg = <0xc0>; #address-cells = <1>; #size-cells = <0>; phy_s6_01: ethernet-phy@1c { reg = <0x18>; interrupts = <1 1 0 0>; }; phy_s6_02: ethernet-phy@1d { reg = <0x19>; interrupts = <1 1 0 0>; }; phy_s6_03: ethernet-phy@1e { reg = <0x1a>; interrupts = <1 1 0 0>; }; phy_s6_04: ethernet-phy@1f { reg = <0x1b>; interrupts = <1 1 0 0>; }; }; /* Slot 7 */ t1040mdio7: mdio@e0 { reg = <0xe0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; phy_s7_01: ethernet-phy@1c { reg = <0x1c>; }; phy_s7_02: ethernet-phy@1d { reg = <0x1d>; }; phy_s7_03: ethernet-phy@1e { reg = <0x1e>; }; phy_s7_04: ethernet-phy@1f { reg = <0x1f>; }; }; }; }; }; memory { device_type = "memory"; }; dcsr: dcsr@f00000000 { ranges = <0x00000000 0xf 0x00000000 0x01072000>; }; bportals: bman-portals@ff4000000 { ranges = <0x0 0xf 0xf4000000 0x2000000>; }; qportals: qman-portals@ff6000000 { ranges = <0x0 0xf 0xf6000000 0x2000000>; }; soc: soc@ffe000000 { ranges = <0x00000000 0xf 0xfe000000 0x1000000>; reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11"; reg = <0>; spi-max-frequency = <10000000>; /* input clock */ }; }; i2c@118000 { pca9547@77 { compatible = "philips,pca9547"; reg = <0x77>; #address-cells = <1>; #size-cells = <0>; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <0x2>; ina220@40 { compatible = "ti,ina220"; reg = <0x40>; shunt-resistor = <1000>; }; ina220@41 { compatible = "ti,ina220"; reg = <0x41>; shunt-resistor = <1000>; }; }; }; rtc@68 { compatible = "dallas,ds3232"; reg = <0x68>; interrupts = <0xb 0x1 0 0>; }; }; fman0: fman@400000 { sleep = <&rcpm 0x00000008>; enet0: ethernet@e0000 { fixed-link = <0 1 1000 0 0>; phy-connection-type = "sgmii"; sleep = <&rcpm 0x80000000>; }; enet1: ethernet@e2000 { fixed-link = <1 1 1000 0 0>; phy-connection-type = "sgmii"; sleep = <&rcpm 0x40000000>; }; enet2: ethernet@e4000 { phy-handle = <&phy_s7_03>; phy-connection-type = "sgmii"; sleep = <&rcpm 0x20000000>; }; enet3: ethernet@e6000 { phy-handle = <&rgmii_phy1>; phy-connection-type = "rgmii"; sleep = <&rcpm 0x10000000>; }; enet4: ethernet@e8000 { phy-handle = <&rgmii_phy2>; phy-connection-type = "rgmii"; sleep = <&rcpm 0x08000000>; }; mdio0: mdio@fc000 { }; }; }; fsl,dpaa { compatible = "fsl,t1040-dpaa", "fsl,dpaa"; ethernet@0 { compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet"; fsl,fman-mac = <&enet0>; }; ethernet@1 { compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet"; fsl,fman-mac = <&enet1>; }; ethernet@2 { compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet"; fsl,fman-mac = <&enet2>; }; ethernet@3 { compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet"; fsl,fman-mac = <&enet3>; }; ethernet@4 { compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet"; fsl,fman-mac = <&enet4>; }; }; pci0: pcie@ffe240000 { reg = <0xf 0xfe240000 0 0x10000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0x00000000 0 0x00010000>; }; }; pci1: pcie@ffe250000 { reg = <0xf 0xfe250000 0 0x10000>; ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0x00000000 0 0x00010000>; }; }; pci2: pcie@ffe260000 { reg = <0xf 0xfe260000 0 0x10000>; ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0x00000000 0 0x00010000>; }; }; pci3: pcie@ffe270000 { reg = <0xf 0xfe270000 0 0x10000>; ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0x00000000 0 0x00010000>; }; }; };