/* * * Intel Management Engine Interface (Intel MEI) Linux driver * Copyright (c) 2003-2012, Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * */ #include #include #include "mei_dev.h" #include "hw-me.h" /** * mei_reg_read - Reads 32bit data from the mei device * * @dev: the device structure * @offset: offset from which to read the data * * returns register value (u32) */ static inline u32 mei_reg_read(const struct mei_device *dev, unsigned long offset) { return ioread32(dev->mem_addr + offset); } /** * mei_reg_write - Writes 32bit data to the mei device * * @dev: the device structure * @offset: offset from which to write the data * @value: register value to write (u32) */ static inline void mei_reg_write(const struct mei_device *dev, unsigned long offset, u32 value) { iowrite32(value, dev->mem_addr + offset); } /** * mei_mecbrw_read - Reads 32bit data from ME circular buffer * read window register * * @dev: the device structure * * returns ME_CB_RW register value (u32) */ u32 mei_mecbrw_read(const struct mei_device *dev) { return mei_reg_read(dev, ME_CB_RW); } /** * mei_mecsr_read - Reads 32bit data from the ME CSR * * @dev: the device structure * * returns ME_CSR_HA register value (u32) */ static inline u32 mei_mecsr_read(const struct mei_device *dev) { return mei_reg_read(dev, ME_CSR_HA); } /** * mei_hcsr_read - Reads 32bit data from the host CSR * * @dev: the device structure * * returns H_CSR register value (u32) */ static inline u32 mei_hcsr_read(const struct mei_device *dev) { return mei_reg_read(dev, H_CSR); } /** * mei_hcsr_set - writes H_CSR register to the mei device, * and ignores the H_IS bit for it is write-one-to-zero. * * @dev: the device structure */ static inline void mei_hcsr_set(struct mei_device *dev, u32 hcsr) { hcsr &= ~H_IS; mei_reg_write(dev, H_CSR, hcsr); } /** * me_hw_config - configure hw dependent settings * * @dev: mei device */ void mei_hw_config(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); /* Doesn't change in runtime */ dev->hbuf_depth = (hcsr & H_CBD) >> 24; } /** * mei_clear_interrupts - clear and stop interrupts * * @dev: the device structure */ void mei_clear_interrupts(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); if ((hcsr & H_IS) == H_IS) mei_reg_write(dev, H_CSR, hcsr); } /** * mei_enable_interrupts - enables mei device interrupts * * @dev: the device structure */ void mei_enable_interrupts(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); hcsr |= H_IE; mei_hcsr_set(dev, hcsr); } /** * mei_disable_interrupts - disables mei device interrupts * * @dev: the device structure */ void mei_disable_interrupts(struct mei_device *dev) { u32 hcsr = mei_hcsr_read(dev); hcsr &= ~H_IE; mei_hcsr_set(dev, hcsr); } /** * mei_hw_reset - resets fw via mei csr register. * * @dev: the device structure * @interrupts_enabled: if interrupt should be enabled after reset. */ void mei_hw_reset(struct mei_device *dev, bool intr_enable) { u32 hcsr = mei_hcsr_read(dev); dev_dbg(&dev->pdev->dev, "before reset HCSR = 0x%08x.\n", hcsr); hcsr |= (H_RST | H_IG); if (intr_enable) hcsr |= H_IE; else hcsr &= ~H_IE; mei_hcsr_set(dev, hcsr); hcsr = mei_hcsr_read(dev) | H_IG; hcsr &= ~H_RST; mei_hcsr_set(dev, hcsr); hcsr = mei_hcsr_read(dev); dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", hcsr); } /** * mei_host_set_ready - enable device * * @dev - mei device * returns bool */ void mei_host_set_ready(struct mei_device *dev) { dev->host_hw_state |= H_IE | H_IG | H_RDY; mei_hcsr_set(dev, dev->host_hw_state); } /** * mei_host_is_ready - check whether the host has turned ready * * @dev - mei device * returns bool */ bool mei_host_is_ready(struct mei_device *dev) { dev->host_hw_state = mei_hcsr_read(dev); return (dev->host_hw_state & H_RDY) == H_RDY; } /** * mei_me_is_ready - check whether the me has turned ready * * @dev - mei device * returns bool */ bool mei_me_is_ready(struct mei_device *dev) { dev->me_hw_state = mei_mecsr_read(dev); return (dev->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA; } /** * mei_interrupt_quick_handler - The ISR of the MEI device * * @irq: The irq number * @dev_id: pointer to the device structure * * returns irqreturn_t */ irqreturn_t mei_interrupt_quick_handler(int irq, void *dev_id) { struct mei_device *dev = (struct mei_device *) dev_id; u32 csr_reg = mei_hcsr_read(dev); if ((csr_reg & H_IS) != H_IS) return IRQ_NONE; /* clear H_IS bit in H_CSR */ mei_reg_write(dev, H_CSR, csr_reg); return IRQ_WAKE_THREAD; } /** * mei_hbuf_filled_slots - gets number of device filled buffer slots * * @device: the device structure * * returns number of filled slots */ static unsigned char mei_hbuf_filled_slots(struct mei_device *dev) { char read_ptr, write_ptr; dev->host_hw_state = mei_hcsr_read(dev); read_ptr = (char) ((dev->host_hw_state & H_CBRP) >> 8); write_ptr = (char) ((dev->host_hw_state & H_CBWP) >> 16); return (unsigned char) (write_ptr - read_ptr); } /** * mei_hbuf_is_empty - checks if host buffer is empty. * * @dev: the device structure * * returns true if empty, false - otherwise. */ bool mei_hbuf_is_empty(struct mei_device *dev) { return mei_hbuf_filled_slots(dev) == 0; } /** * mei_hbuf_empty_slots - counts write empty slots. * * @dev: the device structure * * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise empty slots count */ int mei_hbuf_empty_slots(struct mei_device *dev) { unsigned char filled_slots, empty_slots; filled_slots = mei_hbuf_filled_slots(dev); empty_slots = dev->hbuf_depth - filled_slots; /* check for overflow */ if (filled_slots > dev->hbuf_depth) return -EOVERFLOW; return empty_slots; } /** * mei_write_message - writes a message to mei device. * * @dev: the device structure * @hader: mei HECI header of message * @buf: message payload will be written * * This function returns -EIO if write has failed */ int mei_write_message(struct mei_device *dev, struct mei_msg_hdr *header, unsigned char *buf) { unsigned long rem, dw_cnt; unsigned long length = header->length; u32 *reg_buf = (u32 *)buf; u32 hcsr; int i; int empty_slots; dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header)); empty_slots = mei_hbuf_empty_slots(dev); dev_dbg(&dev->pdev->dev, "empty slots = %hu.\n", empty_slots); dw_cnt = mei_data2slots(length); if (empty_slots < 0 || dw_cnt > empty_slots) return -EIO; mei_reg_write(dev, H_CB_WW, *((u32 *) header)); for (i = 0; i < length / 4; i++) mei_reg_write(dev, H_CB_WW, reg_buf[i]); rem = length & 0x3; if (rem > 0) { u32 reg = 0; memcpy(®, &buf[length - rem], rem); mei_reg_write(dev, H_CB_WW, reg); } hcsr = mei_hcsr_read(dev) | H_IG; mei_hcsr_set(dev, hcsr); if (!mei_me_is_ready(dev)) return -EIO; return 0; } /** * mei_count_full_read_slots - counts read full slots. * * @dev: the device structure * * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise filled slots count */ int mei_count_full_read_slots(struct mei_device *dev) { char read_ptr, write_ptr; unsigned char buffer_depth, filled_slots; dev->me_hw_state = mei_mecsr_read(dev); buffer_depth = (unsigned char)((dev->me_hw_state & ME_CBD_HRA) >> 24); read_ptr = (char) ((dev->me_hw_state & ME_CBRP_HRA) >> 8); write_ptr = (char) ((dev->me_hw_state & ME_CBWP_HRA) >> 16); filled_slots = (unsigned char) (write_ptr - read_ptr); /* check for overflow */ if (filled_slots > buffer_depth) return -EOVERFLOW; dev_dbg(&dev->pdev->dev, "filled_slots =%08x\n", filled_slots); return (int)filled_slots; } /** * mei_read_slots - reads a message from mei device. * * @dev: the device structure * @buffer: message buffer will be written * @buffer_length: message size will be read */ void mei_read_slots(struct mei_device *dev, unsigned char *buffer, unsigned long buffer_length) { u32 *reg_buf = (u32 *)buffer; u32 hcsr; for (; buffer_length >= sizeof(u32); buffer_length -= sizeof(u32)) *reg_buf++ = mei_mecbrw_read(dev); if (buffer_length > 0) { u32 reg = mei_mecbrw_read(dev); memcpy(reg_buf, ®, buffer_length); } hcsr = mei_hcsr_read(dev) | H_IG; mei_hcsr_set(dev, hcsr); }