/****************************************************************************** * * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * *****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include "iwl-eeprom.h" #include "iwl-dev.h" #include "iwl-core.h" #include "iwl-io.h" #include "iwl-sta.h" #include "iwl-agn.h" #include "iwl-helpers.h" #include "iwl-agn-hw.h" #include "iwl-6000-hw.h" #include "iwl-agn-led.h" #include "iwl-agn-debugfs.h" /* Highest firmware API version supported */ #define IWL6000_UCODE_API_MAX 4 #define IWL6050_UCODE_API_MAX 4 #define IWL6000G2_UCODE_API_MAX 5 /* Lowest firmware API version supported */ #define IWL6000_UCODE_API_MIN 4 #define IWL6050_UCODE_API_MIN 4 #define IWL6000G2_UCODE_API_MIN 4 #define IWL6000_FW_PRE "iwlwifi-6000-" #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode" #define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api) #define IWL6050_FW_PRE "iwlwifi-6050-" #define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode" #define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api) #define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-" #define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode" #define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api) #define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-" #define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode" #define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api) static void iwl6000_set_ct_threshold(struct iwl_priv *priv) { /* want Celsius */ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD; priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; } /* Indicate calibration version to uCode. */ static void iwl6000_set_calib_version(struct iwl_priv *priv) { if (priv->cfg->need_dc_calib && (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)) iwl_set_bit(priv, CSR_GP_DRIVER_REG, CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); } /* NIC configuration for 6000 series */ static void iwl6000_nic_config(struct iwl_priv *priv) { u16 radio_cfg; radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); /* write radio config values to register */ if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | EEPROM_RF_CFG_STEP_MSK(radio_cfg) | EEPROM_RF_CFG_DASH_MSK(radio_cfg)); /* set CSR_HW_CONFIG_REG for uCode use */ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); /* no locking required for register write */ if (priv->cfg->pa_type == IWL_PA_INTERNAL) { /* 2x2 IPA phy type */ iwl_write32(priv, CSR_GP_DRIVER_REG, CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA); } /* else do nothing, uCode configured */ if (priv->cfg->ops->lib->temp_ops.set_calib_version) priv->cfg->ops->lib->temp_ops.set_calib_version(priv); } static struct iwl_sensitivity_ranges iwl6000_sensitivity = { .min_nrg_cck = 97, .max_nrg_cck = 0, /* not used, set to 0 */ .auto_corr_min_ofdm = 80, .auto_corr_min_ofdm_mrc = 128, .auto_corr_min_ofdm_x1 = 105, .auto_corr_min_ofdm_mrc_x1 = 192, .auto_corr_max_ofdm = 145, .auto_corr_max_ofdm_mrc = 232, .auto_corr_max_ofdm_x1 = 110, .auto_corr_max_ofdm_mrc_x1 = 232, .auto_corr_min_cck = 125, .auto_corr_max_cck = 175, .auto_corr_min_cck_mrc = 160, .auto_corr_max_cck_mrc = 310, .nrg_th_cck = 97, .nrg_th_ofdm = 100, .barker_corr_th_min = 190, .barker_corr_th_min_mrc = 390, .nrg_th_cca = 62, }; static int iwl6000_hw_set_hw_params(struct iwl_priv *priv) { if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES) priv->cfg->num_of_queues = priv->cfg->mod_params->num_of_queues; priv->hw_params.max_txq_num = priv->cfg->num_of_queues; priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM; priv->hw_params.scd_bc_tbls_size = priv->cfg->num_of_queues * sizeof(struct iwlagn_scd_bc_tbl); priv->hw_params.tfd_size = sizeof(struct iwl_tfd); priv->hw_params.max_stations = IWLAGN_STATION_COUNT; priv->hw_params.bcast_sta_id = IWLAGN_BROADCAST_ID; priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE; priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE; priv->hw_params.max_bsm_size = 0; priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ); priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant); priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; if (priv->cfg->ops->lib->temp_ops.set_ct_kill) priv->cfg->ops->lib->temp_ops.set_ct_kill(priv); /* Set initial sensitivity parameters */ /* Set initial calibration set */ priv->hw_params.sens = &iwl6000_sensitivity; priv->hw_params.calib_init_cfg = BIT(IWL_CALIB_XTAL) | BIT(IWL_CALIB_LO) | BIT(IWL_CALIB_TX_IQ) | BIT(IWL_CALIB_BASE_BAND); if (priv->cfg->need_dc_calib) priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_DC); priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS; return 0; } static int iwl6000_hw_channel_switch(struct iwl_priv *priv, struct ieee80211_channel_switch *ch_switch) { struct iwl6000_channel_switch_cmd cmd; const struct iwl_channel_info *ch_info; u32 switch_time_in_usec, ucode_switch_time; u16 ch; u32 tsf_low; u8 switch_count; u16 beacon_interval = le16_to_cpu(priv->rxon_timing.beacon_interval); struct ieee80211_vif *vif = priv->vif; struct iwl_host_cmd hcmd = { .id = REPLY_CHANNEL_SWITCH, .len = sizeof(cmd), .flags = CMD_SYNC, .data = &cmd, }; cmd.band = priv->band == IEEE80211_BAND_2GHZ; ch = ch_switch->channel->hw_value; IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", priv->active_rxon.channel, ch); cmd.channel = cpu_to_le16(ch); cmd.rxon_flags = priv->staging_rxon.flags; cmd.rxon_filter_flags = priv->staging_rxon.filter_flags; switch_count = ch_switch->count; tsf_low = ch_switch->timestamp & 0x0ffffffff; /* * calculate the ucode channel switch time * adding TSF as one of the factor for when to switch */ if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { if (switch_count > ((priv->ucode_beacon_time - tsf_low) / beacon_interval)) { switch_count -= (priv->ucode_beacon_time - tsf_low) / beacon_interval; } else switch_count = 0; } if (switch_count <= 1) cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); else { switch_time_in_usec = vif->bss_conf.beacon_int * switch_count * TIME_UNIT; ucode_switch_time = iwl_usecs_to_beacons(priv, switch_time_in_usec, beacon_interval); cmd.switch_time = iwl_add_beacon_time(priv, priv->ucode_beacon_time, ucode_switch_time, beacon_interval); } IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", cmd.switch_time); ch_info = iwl_get_channel_info(priv, priv->band, ch); if (ch_info) cmd.expect_beacon = is_channel_radar(ch_info); else { IWL_ERR(priv, "invalid channel switch from %u to %u\n", priv->active_rxon.channel, ch); return -EFAULT; } priv->switch_rxon.channel = cmd.channel; priv->switch_rxon.switch_in_progress = true; return iwl_send_cmd_sync(priv, &hcmd); } static struct iwl_lib_ops iwl6000_lib = { .set_hw_params = iwl6000_hw_set_hw_params, .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl, .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl, .txq_set_sched = iwlagn_txq_set_sched, .txq_agg_enable = iwlagn_txq_agg_enable, .txq_agg_disable = iwlagn_txq_agg_disable, .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd, .txq_free_tfd = iwl_hw_txq_free_tfd, .txq_init = iwl_hw_tx_queue_init, .rx_handler_setup = iwlagn_rx_handler_setup, .setup_deferred_work = iwlagn_setup_deferred_work, .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr, .load_ucode = iwlagn_load_ucode, .dump_nic_event_log = iwl_dump_nic_event_log, .dump_nic_error_log = iwl_dump_nic_error_log, .dump_csr = iwl_dump_csr, .dump_fh = iwl_dump_fh, .init_alive_start = iwlagn_init_alive_start, .alive_notify = iwlagn_alive_notify, .send_tx_power = iwlagn_send_tx_power, .update_chain_flags = iwl_update_chain_flags, .set_channel_switch = iwl6000_hw_channel_switch, .apm_ops = { .init = iwl_apm_init, .stop = iwl_apm_stop, .config = iwl6000_nic_config, .set_pwr_src = iwl_set_pwr_src, }, .eeprom_ops = { .regulatory_bands = { EEPROM_REG_BAND_1_CHANNELS, EEPROM_REG_BAND_2_CHANNELS, EEPROM_REG_BAND_3_CHANNELS, EEPROM_REG_BAND_4_CHANNELS, EEPROM_REG_BAND_5_CHANNELS, EEPROM_6000_REG_BAND_24_HT40_CHANNELS, EEPROM_REG_BAND_52_HT40_CHANNELS }, .verify_signature = iwlcore_eeprom_verify_signature, .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, .release_semaphore = iwlcore_eeprom_release_semaphore, .calib_version = iwlagn_eeprom_calib_version, .query_addr = iwlagn_eeprom_query_addr, .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower, }, .post_associate = iwl_post_associate, .isr = iwl_isr_ict, .config_ap = iwl_config_ap, .temp_ops = { .temperature = iwlagn_temperature, .set_ct_kill = iwl6000_set_ct_threshold, .set_calib_version = iwl6000_set_calib_version, }, .manage_ibss_station = iwlagn_manage_ibss_station, .update_bcast_station = iwl_update_bcast_station, .debugfs_ops = { .rx_stats_read = iwl_ucode_rx_stats_read, .tx_stats_read = iwl_ucode_tx_stats_read, .general_stats_read = iwl_ucode_general_stats_read, .bt_stats_read = iwl_ucode_bt_stats_read, }, .recover_from_tx_stall = iwl_bg_monitor_recover, .check_plcp_health = iwl_good_plcp_health, .check_ack_health = iwl_good_ack_health, .txfifo_flush = iwlagn_txfifo_flush, .dev_txfifo_flush = iwlagn_dev_txfifo_flush, .tt_ops = { .lower_power_detection = iwl_tt_is_low_power_state, .tt_power_mode = iwl_tt_current_power_mode, .ct_kill_check = iwl_check_for_ct_kill, } }; static struct iwl_lib_ops iwl6000g2b_lib = { .set_hw_params = iwl6000_hw_set_hw_params, .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl, .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl, .txq_set_sched = iwlagn_txq_set_sched, .txq_agg_enable = iwlagn_txq_agg_enable, .txq_agg_disable = iwlagn_txq_agg_disable, .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd, .txq_free_tfd = iwl_hw_txq_free_tfd, .txq_init = iwl_hw_tx_queue_init, .rx_handler_setup = iwlagn_bt_rx_handler_setup, .setup_deferred_work = iwlagn_bt_setup_deferred_work, .cancel_deferred_work = iwlagn_bt_cancel_deferred_work, .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr, .load_ucode = iwlagn_load_ucode, .dump_nic_event_log = iwl_dump_nic_event_log, .dump_nic_error_log = iwl_dump_nic_error_log, .dump_csr = iwl_dump_csr, .dump_fh = iwl_dump_fh, .init_alive_start = iwlagn_init_alive_start, .alive_notify = iwlagn_alive_notify, .send_tx_power = iwlagn_send_tx_power, .update_chain_flags = iwl_update_chain_flags, .set_channel_switch = iwl6000_hw_channel_switch, .apm_ops = { .init = iwl_apm_init, .stop = iwl_apm_stop, .config = iwl6000_nic_config, .set_pwr_src = iwl_set_pwr_src, }, .eeprom_ops = { .regulatory_bands = { EEPROM_REG_BAND_1_CHANNELS, EEPROM_REG_BAND_2_CHANNELS, EEPROM_REG_BAND_3_CHANNELS, EEPROM_REG_BAND_4_CHANNELS, EEPROM_REG_BAND_5_CHANNELS, EEPROM_6000_REG_BAND_24_HT40_CHANNELS, EEPROM_REG_BAND_52_HT40_CHANNELS }, .verify_signature = iwlcore_eeprom_verify_signature, .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, .release_semaphore = iwlcore_eeprom_release_semaphore, .calib_version = iwlagn_eeprom_calib_version, .query_addr = iwlagn_eeprom_query_addr, .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower, }, .post_associate = iwl_post_associate, .isr = iwl_isr_ict, .config_ap = iwl_config_ap, .temp_ops = { .temperature = iwlagn_temperature, .set_ct_kill = iwl6000_set_ct_threshold, .set_calib_version = iwl6000_set_calib_version, }, .manage_ibss_station = iwlagn_manage_ibss_station, .update_bcast_station = iwl_update_bcast_station, .debugfs_ops = { .rx_stats_read = iwl_ucode_rx_stats_read, .tx_stats_read = iwl_ucode_tx_stats_read, .general_stats_read = iwl_ucode_general_stats_read, .bt_stats_read = iwl_ucode_bt_stats_read, }, .recover_from_tx_stall = iwl_bg_monitor_recover, .check_plcp_health = iwl_good_plcp_health, .check_ack_health = iwl_good_ack_health, .txfifo_flush = iwlagn_txfifo_flush, .dev_txfifo_flush = iwlagn_dev_txfifo_flush, .tt_ops = { .lower_power_detection = iwl_tt_is_low_power_state, .tt_power_mode = iwl_tt_current_power_mode, .ct_kill_check = iwl_check_for_ct_kill, } }; static const struct iwl_ops iwl6000_ops = { .lib = &iwl6000_lib, .hcmd = &iwlagn_hcmd, .utils = &iwlagn_hcmd_utils, .led = &iwlagn_led_ops, }; static const struct iwl_ops iwl6000g2b_ops = { .lib = &iwl6000g2b_lib, .hcmd = &iwlagn_bt_hcmd, .utils = &iwlagn_hcmd_utils, .led = &iwlagn_led_ops, }; struct iwl_cfg iwl6000g2a_2agn_cfg = { .name = "6000 Series 2x2 AGN Gen2a", .fw_name_pre = IWL6000G2A_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, .led_compensation = 51, .use_rts_for_aggregation = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, }; struct iwl_cfg iwl6000g2a_2abg_cfg = { .name = "6000 Series 2x2 ABG Gen2a", .fw_name_pre = IWL6000G2A_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, }; struct iwl_cfg iwl6000g2a_2bg_cfg = { .name = "6000 Series 2x2 BG Gen2a", .fw_name_pre = IWL6000G2A_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_G, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, }; struct iwl_cfg iwl6000g2b_2agn_cfg = { .name = "6000 Series 2x2 AGN Gen2b", .fw_name_pre = IWL6000G2B_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .ops = &iwl6000g2b_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, .led_compensation = 51, .use_rts_for_aggregation = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE, .chain_noise_scale = 1000, .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, .advanced_bt_coexist = true, .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, }; struct iwl_cfg iwl6000g2b_2abg_cfg = { .name = "6000 Series 2x2 ABG Gen2b", .fw_name_pre = IWL6000G2B_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G, .ops = &iwl6000g2b_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE, .chain_noise_scale = 1000, .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, .advanced_bt_coexist = true, .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, }; struct iwl_cfg iwl6000g2b_2bgn_cfg = { .name = "6000 Series 2x2 BGN Gen2b", .fw_name_pre = IWL6000G2B_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_G|IWL_SKU_N, .ops = &iwl6000g2b_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, .led_compensation = 51, .use_rts_for_aggregation = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE, .chain_noise_scale = 1000, .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, .advanced_bt_coexist = true, .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, }; struct iwl_cfg iwl6000g2b_2bg_cfg = { .name = "6000 Series 2x2 BG Gen2b", .fw_name_pre = IWL6000G2B_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_G, .ops = &iwl6000g2b_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE, .chain_noise_scale = 1000, .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, .advanced_bt_coexist = true, .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, }; struct iwl_cfg iwl6000g2b_bgn_cfg = { .name = "6000 Series 1x2 BGN Gen2b", .fw_name_pre = IWL6000G2B_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_G|IWL_SKU_N, .ops = &iwl6000g2b_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_A, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, .led_compensation = 51, .use_rts_for_aggregation = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE, .chain_noise_scale = 1000, .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, .advanced_bt_coexist = true, .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, }; struct iwl_cfg iwl6000g2b_bg_cfg = { .name = "6000 Series 1x2 BG Gen2b", .fw_name_pre = IWL6000G2B_FW_PRE, .ucode_api_max = IWL6000G2_UCODE_API_MAX, .ucode_api_min = IWL6000G2_UCODE_API_MIN, .sku = IWL_SKU_G, .ops = &iwl6000g2b_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_A, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE, .chain_noise_scale = 1000, .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, .advanced_bt_coexist = true, .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, }; /* * "i": Internal configuration, use internal Power Amplifier */ struct iwl_cfg iwl6000i_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN", .fw_name_pre = IWL6000_FW_PRE, .ucode_api_max = IWL6000_UCODE_API_MAX, .ucode_api_min = IWL6000_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_BC, .valid_rx_ant = ANT_BC, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_INTERNAL, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, .led_compensation = 51, .use_rts_for_aggregation = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, }; struct iwl_cfg iwl6000i_2abg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG", .fw_name_pre = IWL6000_FW_PRE, .ucode_api_max = IWL6000_UCODE_API_MAX, .ucode_api_min = IWL6000_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_BC, .valid_rx_ant = ANT_BC, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_INTERNAL, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, }; struct iwl_cfg iwl6000i_2bg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6200 BG", .fw_name_pre = IWL6000_FW_PRE, .ucode_api_max = IWL6000_UCODE_API_MAX, .ucode_api_min = IWL6000_UCODE_API_MIN, .sku = IWL_SKU_G, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_BC, .valid_rx_ant = ANT_BC, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_INTERNAL, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, }; struct iwl_cfg iwl6050_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN", .fw_name_pre = IWL6050_FW_PRE, .ucode_api_max = IWL6050_UCODE_API_MAX, .ucode_api_min = IWL6050_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6050_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x50, .shadow_ram_support = true, .ht_greenfield_support = true, .led_compensation = 51, .use_rts_for_aggregation = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1500, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, }; struct iwl_cfg iwl6050g2_bgn_cfg = { .name = "6050 Series 1x2 BGN Gen2", .fw_name_pre = IWL6050_FW_PRE, .ucode_api_max = IWL6050_UCODE_API_MAX, .ucode_api_min = IWL6050_UCODE_API_MIN, .sku = IWL_SKU_G|IWL_SKU_N, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6050G2_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_A, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x50, .shadow_ram_support = true, .ht_greenfield_support = true, .led_compensation = 51, .use_rts_for_aggregation = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1500, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, }; struct iwl_cfg iwl6050_2abg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG", .fw_name_pre = IWL6050_FW_PRE, .ucode_api_max = IWL6050_UCODE_API_MAX, .ucode_api_min = IWL6050_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6050_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x50, .shadow_ram_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1500, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, .need_dc_calib = true, }; struct iwl_cfg iwl6000_3agn_cfg = { .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN", .fw_name_pre = IWL6000_FW_PRE, .ucode_api_max = IWL6000_UCODE_API_MAX, .ucode_api_min = IWL6000_UCODE_API_MIN, .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .ops = &iwl6000_ops, .eeprom_size = OTP_LOW_IMAGE_SIZE, .eeprom_ver = EEPROM_6000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, .mod_params = &iwlagn_mod_params, .valid_tx_ant = ANT_ABC, .valid_rx_ant = ANT_ABC, .pll_cfg_val = 0, .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, .led_compensation = 51, .use_rts_for_aggregation = true, /* use rts/cts protection */ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));