/* * Copyright 2002-2005, Devicescape Software, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef STA_INFO_H #define STA_INFO_H #include #include #include #include #include #include "key.h" /** * enum ieee80211_sta_info_flags - Stations flags * * These flags are used with &struct sta_info's @flags member, but * only indirectly with set_sta_flag() and friends. * * @WLAN_STA_AUTH: Station is authenticated. * @WLAN_STA_ASSOC: Station is associated. * @WLAN_STA_PS_STA: Station is in power-save mode * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic. * This bit is always checked so needs to be enabled for all stations * when virtual port control is not in use. * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble * frames. * @WLAN_STA_WME: Station is a QoS-STA. * @WLAN_STA_WDS: Station is one of our WDS peers. * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the * IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next * frame to this station is transmitted. * @WLAN_STA_MFP: Management frame protection is used with this STA. * @WLAN_STA_BLOCK_BA: Used to deny ADDBA requests (both TX and RX) * during suspend/resume and station removal. * @WLAN_STA_PS_DRIVER: driver requires keeping this station in * power-save mode logically to flush frames that might still * be in the queues * @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping * station in power-save mode, reply when the driver unblocks. * @WLAN_STA_TDLS_PEER: Station is a TDLS peer. * @WLAN_STA_TDLS_PEER_AUTH: This TDLS peer is authorized to send direct * packets. This means the link is enabled. * @WLAN_STA_UAPSD: Station requested unscheduled SP while driver was * keeping station in power-save mode, reply when the driver * unblocks the station. * @WLAN_STA_SP: Station is in a service period, so don't try to * reply to other uAPSD trigger frames or PS-Poll. * @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame. */ enum ieee80211_sta_info_flags { WLAN_STA_AUTH, WLAN_STA_ASSOC, WLAN_STA_PS_STA, WLAN_STA_AUTHORIZED, WLAN_STA_SHORT_PREAMBLE, WLAN_STA_WME, WLAN_STA_WDS, WLAN_STA_CLEAR_PS_FILT, WLAN_STA_MFP, WLAN_STA_BLOCK_BA, WLAN_STA_PS_DRIVER, WLAN_STA_PSPOLL, WLAN_STA_TDLS_PEER, WLAN_STA_TDLS_PEER_AUTH, WLAN_STA_UAPSD, WLAN_STA_SP, WLAN_STA_4ADDR_EVENT, }; enum ieee80211_sta_state { /* NOTE: These need to be ordered correctly! */ IEEE80211_STA_NONE, IEEE80211_STA_AUTH, IEEE80211_STA_ASSOC, IEEE80211_STA_AUTHORIZED, }; #define STA_TID_NUM 16 #define ADDBA_RESP_INTERVAL HZ #define HT_AGG_MAX_RETRIES 0x3 #define HT_AGG_STATE_DRV_READY 0 #define HT_AGG_STATE_RESPONSE_RECEIVED 1 #define HT_AGG_STATE_OPERATIONAL 2 #define HT_AGG_STATE_STOPPING 3 #define HT_AGG_STATE_WANT_START 4 #define HT_AGG_STATE_WANT_STOP 5 /** * struct tid_ampdu_tx - TID aggregation information (Tx). * * @rcu_head: rcu head for freeing structure * @session_timer: check if we keep Tx-ing on the TID (by timeout value) * @addba_resp_timer: timer for peer's response to addba request * @pending: pending frames queue -- use sta's spinlock to protect * @dialog_token: dialog token for aggregation session * @timeout: session timeout value to be filled in ADDBA requests * @state: session state (see above) * @stop_initiator: initiator of a session stop * @tx_stop: TX DelBA frame when stopping * @buf_size: reorder buffer size at receiver * @failed_bar_ssn: ssn of the last failed BAR tx attempt * @bar_pending: BAR needs to be re-sent * * This structure's lifetime is managed by RCU, assignments to * the array holding it must hold the aggregation mutex. * * The TX path can access it under RCU lock-free if, and * only if, the state has the flag %HT_AGG_STATE_OPERATIONAL * set. Otherwise, the TX path must also acquire the spinlock * and re-check the state, see comments in the tx code * touching it. */ struct tid_ampdu_tx { struct rcu_head rcu_head; struct timer_list session_timer; struct timer_list addba_resp_timer; struct sk_buff_head pending; unsigned long state; u16 timeout; u8 dialog_token; u8 stop_initiator; bool tx_stop; u8 buf_size; u16 failed_bar_ssn; bool bar_pending; }; /** * struct tid_ampdu_rx - TID aggregation information (Rx). * * @reorder_buf: buffer to reorder incoming aggregated MPDUs * @reorder_time: jiffies when skb was added * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value) * @reorder_timer: releases expired frames from the reorder buffer. * @head_seq_num: head sequence number in reordering buffer. * @stored_mpdu_num: number of MPDUs in reordering buffer * @ssn: Starting Sequence Number expected to be aggregated. * @buf_size: buffer size for incoming A-MPDUs * @timeout: reset timer value (in TUs). * @dialog_token: dialog token for aggregation session * @rcu_head: RCU head used for freeing this struct * @reorder_lock: serializes access to reorder buffer, see below. * * This structure's lifetime is managed by RCU, assignments to * the array holding it must hold the aggregation mutex. * * The @reorder_lock is used to protect the members of this * struct, except for @timeout, @buf_size and @dialog_token, * which are constant across the lifetime of the struct (the * dialog token being used only for debugging). */ struct tid_ampdu_rx { struct rcu_head rcu_head; spinlock_t reorder_lock; struct sk_buff **reorder_buf; unsigned long *reorder_time; struct timer_list session_timer; struct timer_list reorder_timer; u16 head_seq_num; u16 stored_mpdu_num; u16 ssn; u16 buf_size; u16 timeout; u8 dialog_token; }; /** * struct sta_ampdu_mlme - STA aggregation information. * * @tid_rx: aggregation info for Rx per TID -- RCU protected * @tid_tx: aggregation info for Tx per TID * @tid_start_tx: sessions where start was requested * @addba_req_num: number of times addBA request has been sent. * @dialog_token_allocator: dialog token enumerator for each new session; * @work: work struct for starting/stopping aggregation * @tid_rx_timer_expired: bitmap indicating on which TIDs the * RX timer expired until the work for it runs * @tid_rx_stop_requested: bitmap indicating which BA sessions per TID the * driver requested to close until the work for it runs * @mtx: mutex to protect all TX data (except non-NULL assignments * to tid_tx[idx], which are protected by the sta spinlock) */ struct sta_ampdu_mlme { struct mutex mtx; /* rx */ struct tid_ampdu_rx __rcu *tid_rx[STA_TID_NUM]; unsigned long tid_rx_timer_expired[BITS_TO_LONGS(STA_TID_NUM)]; unsigned long tid_rx_stop_requested[BITS_TO_LONGS(STA_TID_NUM)]; /* tx */ struct work_struct work; struct tid_ampdu_tx __rcu *tid_tx[STA_TID_NUM]; struct tid_ampdu_tx *tid_start_tx[STA_TID_NUM]; u8 addba_req_num[STA_TID_NUM]; u8 dialog_token_allocator; }; /** * struct sta_info - STA information * * This structure collects information about a station that * mac80211 is communicating with. * * @list: global linked list entry * @hnext: hash table linked list pointer * @local: pointer to the global information * @sdata: virtual interface this station belongs to * @ptk: peer key negotiated with this station, if any * @gtk: group keys negotiated with this station, if any * @rate_ctrl: rate control algorithm reference * @rate_ctrl_priv: rate control private per-STA pointer * @last_tx_rate: rate used for last transmit, to report to userspace as * "the" transmit rate * @last_rx_rate_idx: rx status rate index of the last data packet * @last_rx_rate_flag: rx status flag of the last data packet * @lock: used for locking all fields that require locking, see comments * in the header file. * @drv_unblock_wk: used for driver PS unblocking * @listen_interval: listen interval of this station, when we're acting as AP * @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly * @ps_tx_buf: buffers (per AC) of frames to transmit to this station * when it leaves power saving state or polls * @tx_filtered: buffers (per AC) of frames we already tried to * transmit but were filtered by hardware due to STA having * entered power saving state, these are also delivered to * the station when it leaves powersave or polls for frames * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on * @rx_packets: Number of MSDUs received from this STA * @rx_bytes: Number of bytes received from this STA * @wep_weak_iv_count: number of weak WEP IVs received from this station * @last_rx: time (in jiffies) when last frame was received from this STA * @last_connected: time (in seconds) when a station got connected * @num_duplicates: number of duplicate frames received from this STA * @rx_fragments: number of received MPDUs * @rx_dropped: number of dropped MPDUs from this STA * @last_signal: signal of last received frame from this STA * @avg_signal: moving average of signal of received frames from this STA * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue) * @tx_filtered_count: number of frames the hardware filtered for this STA * @tx_retry_failed: number of frames that failed retry * @tx_retry_count: total number of retries for frames to this STA * @fail_avg: moving percentage of failed MSDUs * @tx_packets: number of RX/TX MSDUs * @tx_bytes: number of bytes transmitted to this STA * @tx_fragments: number of transmitted MPDUs * @tid_seq: per-TID sequence numbers for sending to this STA * @ampdu_mlme: A-MPDU state machine state * @timer_to_tid: identity mapping to ID timers * @llid: Local link ID * @plid: Peer link ID * @reason: Cancel reason on PLINK_HOLDING state * @plink_retries: Retries in establishment * @ignore_plink_timer: ignore the peer-link timer (used internally) * @plink_state: peer link state * @plink_timeout: timeout of peer link * @plink_timer: peer link watch timer * @plink_timer_was_running: used by suspend/resume to restore timers * @debugfs: debug filesystem info * @dead: set to true when sta is unlinked * @uploaded: set to true when sta is uploaded to the driver * @lost_packets: number of consecutive lost packets * @dummy: indicate a dummy station created for receiving * EAP frames before association * @sta: station information we share with the driver * @sta_state: duplicates information about station state (for debug) */ struct sta_info { /* General information, mostly static */ struct list_head list; struct sta_info __rcu *hnext; struct ieee80211_local *local; struct ieee80211_sub_if_data *sdata; struct ieee80211_key __rcu *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS]; struct ieee80211_key __rcu *ptk; struct rate_control_ref *rate_ctrl; void *rate_ctrl_priv; spinlock_t lock; struct work_struct drv_unblock_wk; u16 listen_interval; bool dead; bool uploaded; enum ieee80211_sta_state sta_state; /* use the accessors defined below */ unsigned long _flags; /* * STA powersave frame queues, no more than the internal * locking required. */ struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS]; struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS]; unsigned long driver_buffered_tids; /* Updated from RX path only, no locking requirements */ unsigned long rx_packets, rx_bytes; unsigned long wep_weak_iv_count; unsigned long last_rx; long last_connected; unsigned long num_duplicates; unsigned long rx_fragments; unsigned long rx_dropped; int last_signal; struct ewma avg_signal; /* Plus 1 for non-QoS frames */ __le16 last_seq_ctrl[NUM_RX_DATA_QUEUES + 1]; /* Updated from TX status path only, no locking requirements */ unsigned long tx_filtered_count; unsigned long tx_retry_failed, tx_retry_count; /* moving percentage of failed MSDUs */ unsigned int fail_avg; /* Updated from TX path only, no locking requirements */ unsigned long tx_packets; unsigned long tx_bytes; unsigned long tx_fragments; struct ieee80211_tx_rate last_tx_rate; int last_rx_rate_idx; int last_rx_rate_flag; u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1]; /* * Aggregation information, locked with lock. */ struct sta_ampdu_mlme ampdu_mlme; u8 timer_to_tid[STA_TID_NUM]; #ifdef CONFIG_MAC80211_MESH /* * Mesh peer link attributes * TODO: move to a sub-structure that is referenced with pointer? */ __le16 llid; __le16 plid; __le16 reason; u8 plink_retries; bool ignore_plink_timer; bool plink_timer_was_running; enum nl80211_plink_state plink_state; u32 plink_timeout; struct timer_list plink_timer; #endif #ifdef CONFIG_MAC80211_DEBUGFS struct sta_info_debugfsdentries { struct dentry *dir; bool add_has_run; } debugfs; #endif unsigned int lost_packets; /* should be right in front of sta to be in the same cache line */ bool dummy; /* keep last! */ struct ieee80211_sta sta; }; static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta) { #ifdef CONFIG_MAC80211_MESH return sta->plink_state; #endif return NL80211_PLINK_LISTEN; } static inline void set_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { WARN_ON(flag == WLAN_STA_AUTH || flag == WLAN_STA_ASSOC || flag == WLAN_STA_AUTHORIZED); set_bit(flag, &sta->_flags); } static inline void clear_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { WARN_ON(flag == WLAN_STA_AUTH || flag == WLAN_STA_ASSOC || flag == WLAN_STA_AUTHORIZED); clear_bit(flag, &sta->_flags); } static inline int test_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { return test_bit(flag, &sta->_flags); } static inline int test_and_clear_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { WARN_ON(flag == WLAN_STA_AUTH || flag == WLAN_STA_ASSOC || flag == WLAN_STA_AUTHORIZED); return test_and_clear_bit(flag, &sta->_flags); } static inline int test_and_set_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { WARN_ON(flag == WLAN_STA_AUTH || flag == WLAN_STA_ASSOC || flag == WLAN_STA_AUTHORIZED); return test_and_set_bit(flag, &sta->_flags); } int sta_info_move_state_checked(struct sta_info *sta, enum ieee80211_sta_state new_state); static inline void sta_info_move_state(struct sta_info *sta, enum ieee80211_sta_state new_state) { int ret = sta_info_move_state_checked(sta, new_state); WARN_ON_ONCE(ret); } void ieee80211_assign_tid_tx(struct sta_info *sta, int tid, struct tid_ampdu_tx *tid_tx); static inline struct tid_ampdu_tx * rcu_dereference_protected_tid_tx(struct sta_info *sta, int tid) { return rcu_dereference_protected(sta->ampdu_mlme.tid_tx[tid], lockdep_is_held(&sta->lock) || lockdep_is_held(&sta->ampdu_mlme.mtx)); } #define STA_HASH_SIZE 256 #define STA_HASH(sta) (sta[5]) /* Maximum number of frames to buffer per power saving station per AC */ #define STA_MAX_TX_BUFFER 64 /* Minimum buffered frame expiry time. If STA uses listen interval that is * smaller than this value, the minimum value here is used instead. */ #define STA_TX_BUFFER_EXPIRE (10 * HZ) /* How often station data is cleaned up (e.g., expiration of buffered frames) */ #define STA_INFO_CLEANUP_INTERVAL (10 * HZ) /* * Get a STA info, must be under RCU read lock. */ struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata, const u8 *addr); struct sta_info *sta_info_get_rx(struct ieee80211_sub_if_data *sdata, const u8 *addr); struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata, const u8 *addr); struct sta_info *sta_info_get_bss_rx(struct ieee80211_sub_if_data *sdata, const u8 *addr); static inline void for_each_sta_info_type_check(struct ieee80211_local *local, const u8 *addr, struct sta_info *sta, struct sta_info *nxt) { } #define for_each_sta_info(local, _addr, _sta, nxt) \ for ( /* initialise loop */ \ _sta = rcu_dereference(local->sta_hash[STA_HASH(_addr)]),\ nxt = _sta ? rcu_dereference(_sta->hnext) : NULL; \ /* typecheck */ \ for_each_sta_info_type_check(local, (_addr), _sta, nxt),\ /* continue condition */ \ _sta; \ /* advance loop */ \ _sta = nxt, \ nxt = _sta ? rcu_dereference(_sta->hnext) : NULL \ ) \ /* run code only if address matches and it's not a dummy sta */ \ if (memcmp(_sta->sta.addr, (_addr), ETH_ALEN) == 0 && \ !_sta->dummy) #define for_each_sta_info_rx(local, _addr, _sta, nxt) \ for ( /* initialise loop */ \ _sta = rcu_dereference(local->sta_hash[STA_HASH(_addr)]),\ nxt = _sta ? rcu_dereference(_sta->hnext) : NULL; \ /* typecheck */ \ for_each_sta_info_type_check(local, (_addr), _sta, nxt),\ /* continue condition */ \ _sta; \ /* advance loop */ \ _sta = nxt, \ nxt = _sta ? rcu_dereference(_sta->hnext) : NULL \ ) \ /* compare address and run code only if it matches */ \ if (memcmp(_sta->sta.addr, (_addr), ETH_ALEN) == 0) /* * Get STA info by index, BROKEN! */ struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata, int idx); /* * Create a new STA info, caller owns returned structure * until sta_info_insert(). */ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, const u8 *addr, gfp_t gfp); void sta_info_free(struct ieee80211_local *local, struct sta_info *sta); /* * Insert STA info into hash table/list, returns zero or a * -EEXIST if (if the same MAC address is already present). * * Calling the non-rcu version makes the caller relinquish, * the _rcu version calls read_lock_rcu() and must be called * without it held. */ int sta_info_insert(struct sta_info *sta); int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU); int sta_info_reinsert(struct sta_info *sta); int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata, const u8 *addr); int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata, const u8 *addr); void sta_info_recalc_tim(struct sta_info *sta); void sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); int sta_info_flush(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata); void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, unsigned long exp_time); void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta); void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta); void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta); #endif /* STA_INFO_H */