Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...

1 files changed, 217 insertions, 0 deletions

diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
new file mode 100644
index 0000000..e9e45b9
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb93xx_flash_data;
+
+static struct resource edb93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb93xx_flash_resource,
+};
+
+static void __init __edb93xx_register_flash(unsigned int width,
+			resource_size_t start, resource_size_t size)
+{
+	edb93xx_flash_data.width	= width;
+	edb93xx_flash_resource.start	= start;
+	edb93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&edb93xx_flash);
+}
+
+static void __init edb93xx_register_flash(void)
+{
+	if (machine_is_edb9307() || machine_is_edb9312() ||
+	    machine_is_edb9315()) {
+		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+	} else {
+		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+	}
+}
+
+static struct ep93xx_eth_data edb93xx_eth_data = {
+	.phy_id		= 1,
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+	if (machine_is_edb9302a() || machine_is_edb9307a() ||
+	    machine_is_edb9315a()) {
+		ep93xx_register_i2c(edb93xxa_i2c_data,
+				ARRAY_SIZE(edb93xxa_i2c_data));
+	} else if (machine_is_edb9307() || machine_is_edb9312() ||
+		   machine_is_edb9315()) {
+		ep93xx_register_i2c(edb93xx_i2c_data,
+				ARRAY_SIZE(edb93xx_i2c_data));
+	}
+}
+
+static void __init edb93xx_init_machine(void)
+{
+	ep93xx_init_devices();
+	edb93xx_register_flash();
+	ep93xx_register_eth(&edb93xx_eth_data, 1);
+	edb93xx_register_i2c();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+	/* Maintainer: George Kashperko <george@chas.com.ua> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif