diff options
author | Andreas Mohr <andim2@users.sourceforge.net> | 2009-06-10 09:55:04 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-06-11 09:32:39 (GMT) |
commit | 720017623ab294b66c8a95d7bc5ccf75a581ebe4 (patch) | |
tree | b5603217826267eaff7022dca689169b29bf8d36 /drivers/net | |
parent | e5241c448f94feee40b2a285c8bf55d066420073 (diff) | |
download | linux-720017623ab294b66c8a95d7bc5ccf75a581ebe4.tar.xz |
e100: add non-MII PHY support
Restore support for cards with MII-lacking PHYs as compared to removed
pre-2.6.29 eepro100 driver: use full low-level MII I/O access abstraction
by providing clean PHY-specific mdio_ctrl() functions for either standard
MII-compliant cards, slightly special ones or non-MII PHY ones.
We now have another netdev_priv member for mdio_ctrl(), thus we have some
array indirection, but we save some additional opcodes for specific
phy_82552_v handling in the common case.
[akpm@linux-foundation.org: cleanups]
Signed-off-by: Andreas Mohr <andi@lisas.de>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/e100.c | 188 |
1 files changed, 162 insertions, 26 deletions
diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 0c37dd9..119dc53 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -143,6 +143,8 @@ * FIXES: * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com> * - Stratus87247: protect MDI control register manipulations + * 2009/06/01 - Andreas Mohr <andi at lisas dot de> + * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs */ #include <linux/module.h> @@ -372,6 +374,7 @@ enum eeprom_op { enum eeprom_offsets { eeprom_cnfg_mdix = 0x03, + eeprom_phy_iface = 0x06, eeprom_id = 0x0A, eeprom_config_asf = 0x0D, eeprom_smbus_addr = 0x90, @@ -381,6 +384,18 @@ enum eeprom_cnfg_mdix { eeprom_mdix_enabled = 0x0080, }; +enum eeprom_phy_iface { + NoSuchPhy = 0, + I82553AB, + I82553C, + I82503, + DP83840, + S80C240, + S80C24, + I82555, + DP83840A = 10, +}; + enum eeprom_id { eeprom_id_wol = 0x0020, }; @@ -545,6 +560,7 @@ struct nic { u32 msg_enable ____cacheline_aligned; struct net_device *netdev; struct pci_dev *pdev; + u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data); struct rx *rxs ____cacheline_aligned; struct rx *rx_to_use; @@ -899,7 +915,21 @@ err_unlock: return err; } -static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) +static int mdio_read(struct net_device *netdev, int addr, int reg) +{ + struct nic *nic = netdev_priv(netdev); + return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0); +} + +static void mdio_write(struct net_device *netdev, int addr, int reg, int data) +{ + struct nic *nic = netdev_priv(netdev); + + nic->mdio_ctrl(nic, addr, mdi_write, reg, data); +} + +/* the standard mdio_ctrl() function for usual MII-compliant hardware */ +static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) { u32 data_out = 0; unsigned int i; @@ -938,30 +968,83 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) return (u16)data_out; } -static int mdio_read(struct net_device *netdev, int addr, int reg) -{ - return mdio_ctrl(netdev_priv(netdev), addr, mdi_read, reg, 0); +/* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */ +static u16 mdio_ctrl_phy_82552_v(struct nic *nic, + u32 addr, + u32 dir, + u32 reg, + u16 data) +{ + if ((reg == MII_BMCR) && (dir == mdi_write)) { + if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) { + u16 advert = mdio_read(nic->netdev, nic->mii.phy_id, + MII_ADVERTISE); + + /* + * Workaround Si issue where sometimes the part will not + * autoneg to 100Mbps even when advertised. + */ + if (advert & ADVERTISE_100FULL) + data |= BMCR_SPEED100 | BMCR_FULLDPLX; + else if (advert & ADVERTISE_100HALF) + data |= BMCR_SPEED100; + } + } + return mdio_ctrl_hw(nic, addr, dir, reg, data); } -static void mdio_write(struct net_device *netdev, int addr, int reg, int data) -{ - struct nic *nic = netdev_priv(netdev); - - if ((nic->phy == phy_82552_v) && (reg == MII_BMCR) && - (data & (BMCR_ANRESTART | BMCR_ANENABLE))) { - u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE); - - /* - * Workaround Si issue where sometimes the part will not - * autoneg to 100Mbps even when advertised. - */ - if (advert & ADVERTISE_100FULL) - data |= BMCR_SPEED100 | BMCR_FULLDPLX; - else if (advert & ADVERTISE_100HALF) - data |= BMCR_SPEED100; +/* Fully software-emulated mdio_ctrl() function for cards without + * MII-compliant PHYs. + * For now, this is mainly geared towards 80c24 support; in case of further + * requirements for other types (i82503, ...?) either extend this mechanism + * or split it, whichever is cleaner. + */ +static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic, + u32 addr, + u32 dir, + u32 reg, + u16 data) +{ + /* might need to allocate a netdev_priv'ed register array eventually + * to be able to record state changes, but for now + * some fully hardcoded register handling ought to be ok I guess. */ + + if (dir == mdi_read) { + switch (reg) { + case MII_BMCR: + /* Auto-negotiation, right? */ + return BMCR_ANENABLE | + BMCR_FULLDPLX; + case MII_BMSR: + return BMSR_LSTATUS /* for mii_link_ok() */ | + BMSR_ANEGCAPABLE | + BMSR_10FULL; + case MII_ADVERTISE: + /* 80c24 is a "combo card" PHY, right? */ + return ADVERTISE_10HALF | + ADVERTISE_10FULL; + default: + DPRINTK(HW, DEBUG, + "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n", + dir == mdi_read ? "READ" : "WRITE", addr, reg, data); + return 0xFFFF; + } + } else { + switch (reg) { + default: + DPRINTK(HW, DEBUG, + "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n", + dir == mdi_read ? "READ" : "WRITE", addr, reg, data); + return 0xFFFF; + } } - - mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data); +} +static inline int e100_phy_supports_mii(struct nic *nic) +{ + /* for now, just check it by comparing whether we + are using MII software emulation. + */ + return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated); } static void e100_get_defaults(struct nic *nic) @@ -1013,7 +1096,8 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */ config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */ config->tx_underrun_retry = 0x3; /* # of underrun retries */ - config->mii_mode = 0x1; /* 1=MII mode, 0=503 mode */ + if (e100_phy_supports_mii(nic)) + config->mii_mode = 1; /* 1=MII mode, 0=i82503 mode */ config->pad10 = 0x6; config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */ config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */ @@ -1270,6 +1354,42 @@ static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb) offsetof(struct mem, dump_buf)); } +static int e100_phy_check_without_mii(struct nic *nic) +{ + u8 phy_type; + int without_mii; + + phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f; + + switch (phy_type) { + case NoSuchPhy: /* Non-MII PHY; UNTESTED! */ + case I82503: /* Non-MII PHY; UNTESTED! */ + case S80C24: /* Non-MII PHY; tested and working */ + /* paragraph from the FreeBSD driver, "FXP_PHY_80C24": + * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter + * doesn't have a programming interface of any sort. The + * media is sensed automatically based on how the link partner + * is configured. This is, in essence, manual configuration. + */ + DPRINTK(PROBE, INFO, + "found MII-less i82503 or 80c24 or other PHY\n"); + + nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated; + nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */ + + /* these might be needed for certain MII-less cards... + * nic->flags |= ich; + * nic->flags |= ich_10h_workaround; */ + + without_mii = 1; + break; + default: + without_mii = 0; + break; + } + return without_mii; +} + #define NCONFIG_AUTO_SWITCH 0x0080 #define MII_NSC_CONG MII_RESV1 #define NSC_CONG_ENABLE 0x0100 @@ -1290,9 +1410,21 @@ static int e100_phy_init(struct nic *nic) if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0)))) break; } - DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id); - if (addr == 32) - return -EAGAIN; + if (addr == 32) { + /* uhoh, no PHY detected: check whether we seem to be some + * weird, rare variant which is *known* to not have any MII. + * But do this AFTER MII checking only, since this does + * lookup of EEPROM values which may easily be unreliable. */ + if (e100_phy_check_without_mii(nic)) + return 0; /* simply return and hope for the best */ + else { + /* for unknown cases log a fatal error */ + DPRINTK(HW, ERR, + "Failed to locate any known PHY, aborting.\n"); + return -EAGAIN; + } + } else + DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id); /* Isolate all the PHY ids */ for (addr = 0; addr < 32; addr++) @@ -1320,6 +1452,9 @@ static int e100_phy_init(struct nic *nic) if (nic->phy == phy_82552_v) { u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE); + /* assign special tweaked mdio_ctrl() function */ + nic->mdio_ctrl = mdio_ctrl_phy_82552_v; + /* Workaround Si not advertising flow-control during autoneg */ advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert); @@ -2585,6 +2720,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, nic->netdev = netdev; nic->pdev = pdev; nic->msg_enable = (1 << debug) - 1; + nic->mdio_ctrl = mdio_ctrl_hw; pci_set_drvdata(pdev, netdev); if ((err = pci_enable_device(pdev))) { |