diff options
author | Yegor Yefremov <yegorslists@googlemail.com> | 2016-05-31 08:59:15 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-06-25 21:30:42 (GMT) |
commit | 36fd95b17e9c1c41836632d95f2be5cff93b3df8 (patch) | |
tree | 198fd2b26bf044567d47677b7d35a3da907f30cd /drivers/tty/serial/8250 | |
parent | 692aa1905679bd72f84115986235d214f6096a98 (diff) | |
download | linux-36fd95b17e9c1c41836632d95f2be5cff93b3df8.tar.xz |
tty/serial/8250: make UART_MCR register access consistent
Introduce serial8250_out_MCR() and serial8250_in_MCR() routines, that
replace following calls:
serial_out(port, UART_MCR, val)
serial_port_out(up, UART_MCR, val)
serial_in(port, UART_MCR)
This patch is needed in order to integrate reading/writing of MCR
signals via SERIAL_MCTRL_GPIO infrastructure later.
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/8250')
-rw-r--r-- | drivers/tty/serial/8250/8250.h | 10 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 47 |
3 files changed, 35 insertions, 26 deletions
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 31b3d55..1a16fea 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -129,6 +129,16 @@ void serial8250_rpm_put(struct uart_8250_port *p); int serial8250_em485_init(struct uart_8250_port *p); void serial8250_em485_destroy(struct uart_8250_port *p); +static inline void serial8250_out_MCR(struct uart_8250_port *up, int value) +{ + serial_out(up, UART_MCR, value); +} + +static inline int serial8250_in_MCR(struct uart_8250_port *up) +{ + return serial_in(up, UART_MCR); +} + #if defined(__alpha__) && !defined(CONFIG_PCI) /* * Digital did something really horribly wrong with the OUT1 and OUT2 diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 2c44c79..61ad6c3 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -280,7 +280,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_EFR, UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, UART_MCR_TCRTLR); + serial8250_out_MCR(up, UART_MCR_TCRTLR); serial_out(up, UART_FCR, up->fcr); omap8250_update_scr(up, priv); @@ -296,7 +296,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, 0); /* drop TCR + TLR access, we setup XON/XOFF later */ - serial_out(up, UART_MCR, up->mcr); + serial8250_out_MCR(up, up->mcr); serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index c8d8d24..bdfa659 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -527,13 +527,13 @@ static void serial8250_clear_fifos(struct uart_8250_port *p) static inline void serial8250_em485_rts_after_send(struct uart_8250_port *p) { - unsigned char mcr = serial_in(p, UART_MCR); + unsigned char mcr = serial8250_in_MCR(p); if (p->port.rs485.flags & SER_RS485_RTS_AFTER_SEND) mcr |= UART_MCR_RTS; else mcr &= ~UART_MCR_RTS; - serial_out(p, UART_MCR, mcr); + serial8250_out_MCR(p, mcr); } static void serial8250_em485_handle_start_tx(unsigned long arg); @@ -785,10 +785,10 @@ static int size_fifo(struct uart_8250_port *up) old_lcr = serial_in(up, UART_LCR); serial_out(up, UART_LCR, 0); old_fcr = serial_in(up, UART_FCR); - old_mcr = serial_in(up, UART_MCR); + old_mcr = serial8250_in_MCR(up); serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_out(up, UART_MCR, UART_MCR_LOOP); + serial8250_out_MCR(up, UART_MCR_LOOP); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); old_dl = serial_dl_read(up); serial_dl_write(up, 0x0001); @@ -800,7 +800,7 @@ static int size_fifo(struct uart_8250_port *up) (count < 256); count++) serial_in(up, UART_RX); serial_out(up, UART_FCR, old_fcr); - serial_out(up, UART_MCR, old_mcr); + serial8250_out_MCR(up, old_mcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_dl_write(up, old_dl); serial_out(up, UART_LCR, old_lcr); @@ -1040,17 +1040,17 @@ static void autoconfig_16550a(struct uart_8250_port *up) * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 */ serial_out(up, UART_LCR, 0); - status1 = serial_in(up, UART_MCR); + status1 = serial8250_in_MCR(up); serial_out(up, UART_LCR, 0xE0); status2 = serial_in(up, 0x02); /* EXCR1 */ if (!((status2 ^ status1) & UART_MCR_LOOP)) { serial_out(up, UART_LCR, 0); - serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP); + serial8250_out_MCR(up, status1 ^ UART_MCR_LOOP); serial_out(up, UART_LCR, 0xE0); status2 = serial_in(up, 0x02); /* EXCR1 */ serial_out(up, UART_LCR, 0); - serial_out(up, UART_MCR, status1); + serial8250_out_MCR(up, status1); if ((status2 ^ status1) & UART_MCR_LOOP) { unsigned short quot; @@ -1224,7 +1224,7 @@ static void autoconfig(struct uart_8250_port *up) } } - save_mcr = serial_in(up, UART_MCR); + save_mcr = serial8250_in_MCR(up); save_lcr = serial_in(up, UART_LCR); /* @@ -1237,9 +1237,9 @@ static void autoconfig(struct uart_8250_port *up) * that conflicts with COM 1-4 --- we hope! */ if (!(port->flags & UPF_SKIP_TEST)) { - serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A); + serial8250_out_MCR(up, UART_MCR_LOOP | 0x0A); status1 = serial_in(up, UART_MSR) & 0xF0; - serial_out(up, UART_MCR, save_mcr); + serial8250_out_MCR(up, save_mcr); if (status1 != 0x90) { spin_unlock_irqrestore(&port->lock, flags); DEBUG_AUTOCONF("LOOP test failed (%02x) ", @@ -1305,7 +1305,7 @@ static void autoconfig(struct uart_8250_port *up) if (port->type == PORT_RSA) serial_out(up, UART_RSA_FRR, 0); #endif - serial_out(up, UART_MCR, save_mcr); + serial8250_out_MCR(up, save_mcr); serial8250_clear_fifos(up); serial_in(up, UART_RX); if (up->capabilities & UART_CAP_UUE) @@ -1353,19 +1353,18 @@ static void autoconfig_irq(struct uart_8250_port *up) /* forget possible initially masked and pending IRQ */ probe_irq_off(probe_irq_on()); - save_mcr = serial_in(up, UART_MCR); + save_mcr = serial8250_in_MCR(up); save_ier = serial_in(up, UART_IER); - serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); + serial8250_out_MCR(up, UART_MCR_OUT1 | UART_MCR_OUT2); irqs = probe_irq_on(); - serial_out(up, UART_MCR, 0); + serial8250_out_MCR(up, 0); udelay(10); if (port->flags & UPF_FOURPORT) { - serial_out(up, UART_MCR, - UART_MCR_DTR | UART_MCR_RTS); + serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS); } else { - serial_out(up, UART_MCR, - UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + serial8250_out_MCR(up, + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); } serial_out(up, UART_IER, 0x0f); /* enable all intrs */ serial_in(up, UART_LSR); @@ -1376,7 +1375,7 @@ static void autoconfig_irq(struct uart_8250_port *up) udelay(20); irq = probe_irq_off(irqs); - serial_out(up, UART_MCR, save_mcr); + serial8250_out_MCR(up, save_mcr); serial_out(up, UART_IER, save_ier); if (port->flags & UPF_FOURPORT) @@ -1549,14 +1548,14 @@ static inline void start_tx_rs485(struct uart_port *port) del_timer(&em485->stop_tx_timer); em485->active_timer = NULL; - mcr = serial_in(up, UART_MCR); + mcr = serial8250_in_MCR(up); if (!!(up->port.rs485.flags & SER_RS485_RTS_ON_SEND) != !!(mcr & UART_MCR_RTS)) { if (up->port.rs485.flags & SER_RS485_RTS_ON_SEND) mcr |= UART_MCR_RTS; else mcr &= ~UART_MCR_RTS; - serial_out(up, UART_MCR, mcr); + serial8250_out_MCR(up, mcr); if (up->port.rs485.delay_rts_before_send > 0) { em485->active_timer = &em485->start_tx_timer; @@ -1943,7 +1942,7 @@ void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl) mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; - serial_port_out(port, UART_MCR, mcr); + serial8250_out_MCR(up, mcr); } EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); @@ -3090,7 +3089,7 @@ static void serial8250_console_restore(struct uart_8250_port *up) serial8250_set_divisor(port, baud, quot, frac); serial_port_out(port, UART_LCR, up->lcr); - serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); + serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS); } /* |