diff options
author | Alexander Shiyan <shc_work@mail.ru> | 2013-06-29 06:44:17 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-07-26 22:53:04 (GMT) |
commit | 10d8b34a421716d55a4ff7c2d427c35e88b8fd60 (patch) | |
tree | c587a10c1878ba8b7bcaa573f0c0d16735f2c53b /drivers/tty/serial/max310x.c | |
parent | b4cdc8f61beb2a55c8c3d22dfcaf5f34a919fe9b (diff) | |
download | linux-10d8b34a421716d55a4ff7c2d427c35e88b8fd60.tar.xz |
serial: max310x: Driver rework
This patch rework max310x driver.
Major changes have been made:
- Prepare driver to support ICs with more than one UART.
- Prepare driver to support work with I2C-bus.
The patch changes almost every function and can not be divided into parts.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/max310x.c')
-rw-r--r-- | drivers/tty/serial/max310x.c | 918 |
1 files changed, 451 insertions, 467 deletions
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 8941e64..4620289 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1,7 +1,7 @@ /* * Maxim (Dallas) MAX3107/8 serial driver * - * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * Copyright (C) 2012-2013 Alexander Shiyan <shc_work@mail.ru> * * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> * Based on max3110.c, by Feng Tang <feng.tang@intel.com> @@ -17,7 +17,9 @@ /* TODO: MAX14830 support (Quad) */ #include <linux/module.h> +#include <linux/delay.h> #include <linux/device.h> +#include <linux/bitops.h> #include <linux/serial_core.h> #include <linux/serial.h> #include <linux/tty.h> @@ -25,8 +27,10 @@ #include <linux/regmap.h> #include <linux/gpio.h> #include <linux/spi/spi.h> + #include <linux/platform_data/max310x.h> +#define MAX310X_NAME "max310x" #define MAX310X_MAJOR 204 #define MAX310X_MINOR 209 @@ -37,7 +41,8 @@ #define MAX310X_IRQSTS_REG (0x02) /* IRQ status */ #define MAX310X_LSR_IRQEN_REG (0x03) /* LSR IRQ enable */ #define MAX310X_LSR_IRQSTS_REG (0x04) /* LSR IRQ status */ -#define MAX310X_SPCHR_IRQEN_REG (0x05) /* Special char IRQ enable */ +#define MAX310X_REG_05 (0x05) +#define MAX310X_SPCHR_IRQEN_REG MAX310X_REG_05 /* Special char IRQ en */ #define MAX310X_SPCHR_IRQSTS_REG (0x06) /* Special char IRQ status */ #define MAX310X_STS_IRQEN_REG (0x07) /* Status IRQ enable */ #define MAX310X_STS_IRQSTS_REG (0x08) /* Status IRQ status */ @@ -63,8 +68,15 @@ #define MAX310X_BRGDIVLSB_REG (0x1c) /* Baud rate divisor LSB */ #define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */ #define MAX310X_CLKSRC_REG (0x1e) /* Clock source */ -/* Only present in MAX3107 */ -#define MAX3107_REVID_REG (0x1f) /* Revision identification */ +#define MAX310X_REG_1F (0x1f) + +#define MAX310X_REVID_REG MAX310X_REG_1F /* Revision ID */ + +#define MAX310X_GLOBALIRQ_REG MAX310X_REG_1F /* Global IRQ (RO) */ +#define MAX310X_GLOBALCMD_REG MAX310X_REG_1F /* Global Command (WO) */ + +/* Extended registers */ +#define MAX310X_REVID_EXTREG MAX310X_REG_05 /* Revision ID */ /* IRQ register bits */ #define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ @@ -246,58 +258,139 @@ #define MAX310X_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ #define MAX310X_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ +/* Global commands */ +#define MAX310X_EXTREG_ENBL (0xce) +#define MAX310X_EXTREG_DSBL (0xcd) + /* Misc definitions */ #define MAX310X_FIFO_SIZE (128) +#define MAX310x_REV_MASK (0xfc) /* MAX3107 specific */ #define MAX3107_REV_ID (0xa0) -#define MAX3107_REV_MASK (0xfe) - -/* IRQ status bits definitions */ -#define MAX310X_IRQ_TX (MAX310X_IRQ_TXFIFO_BIT | \ - MAX310X_IRQ_TXEMPTY_BIT) -#define MAX310X_IRQ_RX (MAX310X_IRQ_RXFIFO_BIT | \ - MAX310X_IRQ_RXEMPTY_BIT) - -/* Supported chip types */ -enum { - MAX310X_TYPE_MAX3107 = 3107, - MAX310X_TYPE_MAX3108 = 3108, + +struct max310x_devtype { + char name[9]; + int nr; + int (*detect)(struct device *); + void (*power)(struct uart_port *, int); }; -struct max310x_port { - struct uart_driver uart; +struct max310x_one { struct uart_port port; + struct work_struct tx_work; +}; - const char *name; - int uartclk; - - unsigned int nr_gpio; +struct max310x_port { + struct uart_driver uart; + struct max310x_devtype *devtype; + struct regmap *regmap; + struct regmap_config regcfg; + struct mutex mutex; + struct max310x_pdata *pdata; + int gpio_used; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; #endif + struct max310x_one p[0]; +}; - struct regmap *regmap; - struct regmap_config regcfg; +static u8 max310x_port_read(struct uart_port *port, u8 reg) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + unsigned int val = 0; - struct workqueue_struct *wq; - struct work_struct tx_work; + regmap_read(s->regmap, port->iobase + reg, &val); - struct mutex max310x_mutex; + return val; +} - struct max310x_pdata *pdata; +static void max310x_port_write(struct uart_port *port, u8 reg, u8 val) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + regmap_write(s->regmap, port->iobase + reg, val); +} + +static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + regmap_update_bits(s->regmap, port->iobase + reg, mask, val); +} + +static int max3107_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = regmap_read(s->regmap, MAX310X_REVID_REG, &val); + if (ret) + return ret; + + if (((val & MAX310x_REV_MASK) != MAX3107_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static int max3108_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + /* MAX3108 have not REV ID register, we just check default value + * from clocksource register to make sure everything works. + */ + ret = regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); + if (ret) + return ret; + + if (val != (MAX310X_CLKSRC_EXTCLK_BIT | MAX310X_CLKSRC_PLLBYP_BIT)) { + dev_err(dev, "%s not present\n", s->devtype->name); + return -ENODEV; + } + + return 0; +} + +static void max310x_power(struct uart_port *port, int on) +{ + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_FORCESLEEP_BIT, + on ? 0 : MAX310X_MODE1_FORCESLEEP_BIT); + if (on) + msleep(50); +} + +static const struct max310x_devtype max3107_devtype = { + .name = "MAX3107", + .nr = 1, + .detect = max3107_detect, + .power = max310x_power, }; -static bool max3107_8_reg_writeable(struct device *dev, unsigned int reg) +static const struct max310x_devtype max3108_devtype = { + .name = "MAX3108", + .nr = 1, + .detect = max3108_detect, + .power = max310x_power, +}; + +static bool max310x_reg_writeable(struct device *dev, unsigned int reg) { - switch (reg) { + switch (reg & 0x1f) { case MAX310X_IRQSTS_REG: case MAX310X_LSR_IRQSTS_REG: case MAX310X_SPCHR_IRQSTS_REG: case MAX310X_STS_IRQSTS_REG: case MAX310X_TXFIFOLVL_REG: case MAX310X_RXFIFOLVL_REG: - case MAX3107_REVID_REG: /* Only available on MAX3107 */ return false; default: break; @@ -308,7 +401,7 @@ static bool max3107_8_reg_writeable(struct device *dev, unsigned int reg) static bool max310x_reg_volatile(struct device *dev, unsigned int reg) { - switch (reg) { + switch (reg & 0x1f) { case MAX310X_RHR_REG: case MAX310X_IRQSTS_REG: case MAX310X_LSR_IRQSTS_REG: @@ -317,6 +410,9 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg) case MAX310X_TXFIFOLVL_REG: case MAX310X_RXFIFOLVL_REG: case MAX310X_GPIODATA_REG: + case MAX310X_BRGDIVLSB_REG: + case MAX310X_REG_05: + case MAX310X_REG_1F: return true; default: break; @@ -327,7 +423,7 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg) static bool max310x_reg_precious(struct device *dev, unsigned int reg) { - switch (reg) { + switch (reg & 0x1f) { case MAX310X_RHR_REG: case MAX310X_IRQSTS_REG: case MAX310X_SPCHR_IRQSTS_REG: @@ -340,42 +436,25 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg) return false; } -static void max310x_set_baud(struct max310x_port *s, int baud) +static void max310x_set_baud(struct uart_port *port, int baud) { - unsigned int mode = 0, div = s->uartclk / baud; + unsigned int mode = 0, div = port->uartclk / baud; if (!(div / 16)) { /* Mode x2 */ mode = MAX310X_BRGCFG_2XMODE_BIT; - div = (s->uartclk * 2) / baud; + div = (port->uartclk * 2) / baud; } if (!(div / 16)) { /* Mode x4 */ mode = MAX310X_BRGCFG_4XMODE_BIT; - div = (s->uartclk * 4) / baud; + div = (port->uartclk * 4) / baud; } - regmap_write(s->regmap, MAX310X_BRGDIVMSB_REG, - ((div / 16) >> 8) & 0xff); - regmap_write(s->regmap, MAX310X_BRGDIVLSB_REG, (div / 16) & 0xff); - regmap_write(s->regmap, MAX310X_BRGCFG_REG, (div % 16) | mode); -} - -static void max310x_wait_pll(struct max310x_port *s) -{ - int tryes = 1000; - - /* Wait for PLL only if crystal is used */ - if (!(s->pdata->driver_flags & MAX310X_EXT_CLK)) { - unsigned int sts = 0; - - while (tryes--) { - regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &sts); - if (sts & MAX310X_STS_CLKREADY_BIT) - break; - } - } + max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8); + max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16); + max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode); } static int max310x_update_best_err(unsigned long f, long *besterr) @@ -449,49 +528,49 @@ static int max310x_set_ref_clk(struct max310x_port *s) regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); - if (pllcfg) - max310x_wait_pll(s); - - dev_dbg(s->port.dev, "Reference clock set to %lu Hz\n", bestfreq); + /* Wait for crystal */ + if (pllcfg && !(s->pdata->driver_flags & MAX310X_EXT_CLK)) + msleep(10); return (int)bestfreq; } -static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen) +static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) { - unsigned int sts = 0, ch = 0, flag; + unsigned int sts, ch, flag; - if (unlikely(rxlen >= MAX310X_FIFO_SIZE)) { - dev_warn(s->port.dev, "Possible RX FIFO overrun %d\n", rxlen); + if (unlikely(rxlen >= port->fifosize)) { + dev_warn_ratelimited(port->dev, + "Port %i: Possible RX FIFO overrun\n", + port->line); + port->icount.buf_overrun++; /* Ensure sanity of RX level */ - rxlen = MAX310X_FIFO_SIZE; + rxlen = port->fifosize; } - dev_dbg(s->port.dev, "RX Len = %u\n", rxlen); - while (rxlen--) { - regmap_read(s->regmap, MAX310X_RHR_REG, &ch); - regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &sts); + ch = max310x_port_read(port, MAX310X_RHR_REG); + sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT | MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT; - s->port.icount.rx++; + port->icount.rx++; flag = TTY_NORMAL; if (unlikely(sts)) { if (sts & MAX310X_LSR_RXBRK_BIT) { - s->port.icount.brk++; - if (uart_handle_break(&s->port)) + port->icount.brk++; + if (uart_handle_break(port)) continue; } else if (sts & MAX310X_LSR_RXPAR_BIT) - s->port.icount.parity++; + port->icount.parity++; else if (sts & MAX310X_LSR_FRERR_BIT) - s->port.icount.frame++; + port->icount.frame++; else if (sts & MAX310X_LSR_RXOVR_BIT) - s->port.icount.overrun++; + port->icount.overrun++; - sts &= s->port.read_status_mask; + sts &= port->read_status_mask; if (sts & MAX310X_LSR_RXBRK_BIT) flag = TTY_BREAK; else if (sts & MAX310X_LSR_RXPAR_BIT) @@ -502,129 +581,129 @@ static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen) flag = TTY_OVERRUN; } - if (uart_handle_sysrq_char(s->port, ch)) + if (uart_handle_sysrq_char(port, ch)) continue; - if (sts & s->port.ignore_status_mask) + if (sts & port->ignore_status_mask) continue; - uart_insert_char(&s->port, sts, MAX310X_LSR_RXOVR_BIT, - ch, flag); + uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, ch, flag); } - tty_flip_buffer_push(&s->port.state->port); + tty_flip_buffer_push(&port->state->port); } -static void max310x_handle_tx(struct max310x_port *s) +static void max310x_handle_tx(struct uart_port *port) { - struct circ_buf *xmit = &s->port.state->xmit; - unsigned int txlen = 0, to_send; + struct circ_buf *xmit = &port->state->xmit; + unsigned int txlen, to_send; - if (unlikely(s->port.x_char)) { - regmap_write(s->regmap, MAX310X_THR_REG, s->port.x_char); - s->port.icount.tx++; - s->port.x_char = 0; + if (unlikely(port->x_char)) { + max310x_port_write(port, MAX310X_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; return; } - if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) return; /* Get length of data pending in circular buffer */ to_send = uart_circ_chars_pending(xmit); if (likely(to_send)) { /* Limit to size of TX FIFO */ - regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &txlen); - txlen = MAX310X_FIFO_SIZE - txlen; + txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); + txlen = port->fifosize - txlen; to_send = (to_send > txlen) ? txlen : to_send; - dev_dbg(s->port.dev, "TX Len = %u\n", to_send); - /* Add data to send */ - s->port.icount.tx += to_send; + port->icount.tx += to_send; while (to_send--) { - regmap_write(s->regmap, MAX310X_THR_REG, - xmit->buf[xmit->tail]); + max310x_port_write(port, MAX310X_THR_REG, + xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); }; } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); + uart_write_wakeup(port); } -static irqreturn_t max310x_ist(int irq, void *dev_id) +static void max310x_port_irq(struct max310x_port *s, int portno) { - struct max310x_port *s = (struct max310x_port *)dev_id; - unsigned int ists = 0, lsr = 0, rxlen = 0; + struct uart_port *port = &s->p[portno].port; - mutex_lock(&s->max310x_mutex); + do { + unsigned int ists, lsr, rxlen; - for (;;) { /* Read IRQ status & RX FIFO level */ - regmap_read(s->regmap, MAX310X_IRQSTS_REG, &ists); - regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &lsr); - regmap_read(s->regmap, MAX310X_RXFIFOLVL_REG, &rxlen); - if (!ists && !(lsr & MAX310X_LSR_RXTO_BIT) && !rxlen) + ists = max310x_port_read(port, MAX310X_IRQSTS_REG); + rxlen = max310x_port_read(port, MAX310X_RXFIFOLVL_REG); + if (!ists && !rxlen) break; - dev_dbg(s->port.dev, "IRQ status: 0x%02x\n", ists); - - if (rxlen) - max310x_handle_rx(s, rxlen); - if (ists & MAX310X_IRQ_TX) - max310x_handle_tx(s); - if (ists & MAX310X_IRQ_CTS_BIT) - uart_handle_cts_change(&s->port, + if (ists & MAX310X_IRQ_CTS_BIT) { + lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); + uart_handle_cts_change(port, !!(lsr & MAX310X_LSR_CTS_BIT)); - } + } + if (rxlen) + max310x_handle_rx(port, rxlen); + if (ists & MAX310X_IRQ_TXEMPTY_BIT) { + mutex_lock(&s->mutex); + max310x_handle_tx(port); + mutex_unlock(&s->mutex); + } + } while (1); +} - mutex_unlock(&s->max310x_mutex); +static irqreturn_t max310x_ist(int irq, void *dev_id) +{ + struct max310x_port *s = (struct max310x_port *)dev_id; + + if (s->uart.nr > 1) { + do { + unsigned int val = ~0; + + WARN_ON_ONCE(regmap_read(s->regmap, + MAX310X_GLOBALIRQ_REG, &val)); + val = ((1 << s->uart.nr) - 1) & ~val; + if (!val) + break; + max310x_port_irq(s, fls(val) - 1); + } while (1); + } else + max310x_port_irq(s, 0); return IRQ_HANDLED; } static void max310x_wq_proc(struct work_struct *ws) { - struct max310x_port *s = container_of(ws, struct max310x_port, tx_work); + struct max310x_one *one = container_of(ws, struct max310x_one, tx_work); + struct max310x_port *s = dev_get_drvdata(one->port.dev); - mutex_lock(&s->max310x_mutex); - max310x_handle_tx(s); - mutex_unlock(&s->max310x_mutex); + mutex_lock(&s->mutex); + max310x_handle_tx(&one->port); + mutex_unlock(&s->mutex); } static void max310x_start_tx(struct uart_port *port) { - struct max310x_port *s = container_of(port, struct max310x_port, port); + struct max310x_one *one = container_of(port, struct max310x_one, port); - queue_work(s->wq, &s->tx_work); -} - -static void max310x_stop_tx(struct uart_port *port) -{ - /* Do nothing */ -} - -static void max310x_stop_rx(struct uart_port *port) -{ - /* Do nothing */ + if (!work_pending(&one->tx_work)) + schedule_work(&one->tx_work); } static unsigned int max310x_tx_empty(struct uart_port *port) { - unsigned int val = 0; - struct max310x_port *s = container_of(port, struct max310x_port, port); - - mutex_lock(&s->max310x_mutex); - regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &val); - mutex_unlock(&s->max310x_mutex); + unsigned int lvl, sts; - return val ? 0 : TIOCSER_TEMT; -} + lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); + sts = max310x_port_read(port, MAX310X_IRQSTS_REG); -static void max310x_enable_ms(struct uart_port *port) -{ - /* Modem status not supported */ + return ((sts & MAX310X_IRQ_TXEMPTY_BIT) && !lvl) ? TIOCSER_TEMT : 0; } static unsigned int max310x_get_mctrl(struct uart_port *port) @@ -644,28 +723,20 @@ static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl) static void max310x_break_ctl(struct uart_port *port, int break_state) { - struct max310x_port *s = container_of(port, struct max310x_port, port); - - mutex_lock(&s->max310x_mutex); - regmap_update_bits(s->regmap, MAX310X_LCR_REG, - MAX310X_LCR_TXBREAK_BIT, - break_state ? MAX310X_LCR_TXBREAK_BIT : 0); - mutex_unlock(&s->max310x_mutex); + max310x_port_update(port, MAX310X_LCR_REG, + MAX310X_LCR_TXBREAK_BIT, + break_state ? MAX310X_LCR_TXBREAK_BIT : 0); } static void max310x_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct max310x_port *s = container_of(port, struct max310x_port, port); unsigned int lcr, flow = 0; int baud; - mutex_lock(&s->max310x_mutex); - /* Mask termios capabilities we don't support */ termios->c_cflag &= ~CMSPAR; - termios->c_iflag &= ~IXANY; /* Word size */ switch (termios->c_cflag & CSIZE) { @@ -696,7 +767,7 @@ static void max310x_set_termios(struct uart_port *port, lcr |= MAX310X_LCR_STOPLEN_BIT; /* 2 stops */ /* Update LCR register */ - regmap_write(s->regmap, MAX310X_LCR_REG, lcr); + max310x_port_write(port, MAX310X_LCR_REG, lcr); /* Set read status mask */ port->read_status_mask = MAX310X_LSR_RXOVR_BIT; @@ -717,8 +788,8 @@ static void max310x_set_termios(struct uart_port *port, MAX310X_LSR_RXBRK_BIT; /* Configure flow control */ - regmap_write(s->regmap, MAX310X_XON1_REG, termios->c_cc[VSTART]); - regmap_write(s->regmap, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]); + max310x_port_write(port, MAX310X_XON1_REG, termios->c_cc[VSTART]); + max310x_port_write(port, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]); if (termios->c_cflag & CRTSCTS) flow |= MAX310X_FLOWCTRL_AUTOCTS_BIT | MAX310X_FLOWCTRL_AUTORTS_BIT; @@ -728,7 +799,7 @@ static void max310x_set_termios(struct uart_port *port, if (termios->c_iflag & IXOFF) flow |= MAX310X_FLOWCTRL_SWFLOW1_BIT | MAX310X_FLOWCTRL_SWFLOWEN_BIT; - regmap_write(s->regmap, MAX310X_FLOWCTRL_REG, flow); + max310x_port_write(port, MAX310X_FLOWCTRL_REG, flow); /* Get baud rate generator configuration */ baud = uart_get_baud_rate(port, termios, old, @@ -736,36 +807,30 @@ static void max310x_set_termios(struct uart_port *port, port->uartclk / 4); /* Setup baudrate generator */ - max310x_set_baud(s, baud); + max310x_set_baud(port, baud); /* Update timeout according to new baud rate */ uart_update_timeout(port, termios->c_cflag, baud); - - mutex_unlock(&s->max310x_mutex); } static int max310x_startup(struct uart_port *port) { unsigned int val, line = port->line; - struct max310x_port *s = container_of(port, struct max310x_port, port); + struct max310x_port *s = dev_get_drvdata(port->dev); - if (s->pdata->suspend) - s->pdata->suspend(0); - - mutex_lock(&s->max310x_mutex); + s->devtype->power(port, 1); /* Configure baud rate, 9600 as default */ - max310x_set_baud(s, 9600); + max310x_set_baud(port, 9600); /* Configure LCR register, 8N1 mode by default */ - val = MAX310X_LCR_WORD_LEN_8; - regmap_write(s->regmap, MAX310X_LCR_REG, val); + max310x_port_write(port, MAX310X_LCR_REG, MAX310X_LCR_WORD_LEN_8); /* Configure MODE1 register */ - regmap_update_bits(s->regmap, MAX310X_MODE1_REG, - MAX310X_MODE1_TRNSCVCTRL_BIT, - (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL) - ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0); + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, + (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL) + ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0); /* Configure MODE2 register */ val = MAX310X_MODE2_RXEMPTINV_BIT; @@ -776,63 +841,40 @@ static int max310x_startup(struct uart_port *port) /* Reset FIFOs */ val |= MAX310X_MODE2_FIFORST_BIT; - regmap_write(s->regmap, MAX310X_MODE2_REG, val); - - /* Configure FIFO trigger level register */ - /* RX FIFO trigger for 16 words, TX FIFO trigger for 64 words */ - val = MAX310X_FIFOTRIGLVL_RX(16) | MAX310X_FIFOTRIGLVL_TX(64); - regmap_write(s->regmap, MAX310X_FIFOTRIGLVL_REG, val); + max310x_port_write(port, MAX310X_MODE2_REG, val); + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_FIFORST_BIT, 0); /* Configure flow control levels */ /* Flow control halt level 96, resume level 48 */ - val = MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96); - regmap_write(s->regmap, MAX310X_FLOWLVL_REG, val); - - /* Clear timeout register */ - regmap_write(s->regmap, MAX310X_RXTO_REG, 0); - - /* Configure LSR interrupt enable register */ - /* Enable RX timeout interrupt */ - val = MAX310X_LSR_RXTO_BIT; - regmap_write(s->regmap, MAX310X_LSR_IRQEN_REG, val); + max310x_port_write(port, MAX310X_FLOWLVL_REG, + MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96)); - /* Clear FIFO reset */ - regmap_update_bits(s->regmap, MAX310X_MODE2_REG, - MAX310X_MODE2_FIFORST_BIT, 0); + /* Clear IRQ status register */ + max310x_port_read(port, MAX310X_IRQSTS_REG); - /* Clear IRQ status register by reading it */ - regmap_read(s->regmap, MAX310X_IRQSTS_REG, &val); - - /* Configure interrupt enable register */ - /* Enable CTS change interrupt */ - val = MAX310X_IRQ_CTS_BIT; - /* Enable RX, TX interrupts */ - val |= MAX310X_IRQ_RX | MAX310X_IRQ_TX; - regmap_write(s->regmap, MAX310X_IRQEN_REG, val); - - mutex_unlock(&s->max310x_mutex); + /* Enable RX, TX, CTS change interrupts */ + val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT; + max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT); return 0; } static void max310x_shutdown(struct uart_port *port) { - struct max310x_port *s = container_of(port, struct max310x_port, port); + struct max310x_port *s = dev_get_drvdata(port->dev); /* Disable all interrupts */ - mutex_lock(&s->max310x_mutex); - regmap_write(s->regmap, MAX310X_IRQEN_REG, 0); - mutex_unlock(&s->max310x_mutex); + max310x_port_write(port, MAX310X_IRQEN_REG, 0); - if (s->pdata->suspend) - s->pdata->suspend(1); + s->devtype->power(port, 0); } static const char *max310x_type(struct uart_port *port) { - struct max310x_port *s = container_of(port, struct max310x_port, port); + struct max310x_port *s = dev_get_drvdata(port->dev); - return (port->type == PORT_MAX310X) ? s->name : NULL; + return (port->type == PORT_MAX310X) ? s->devtype->name : NULL; } static int max310x_request_port(struct uart_port *port) @@ -841,134 +883,100 @@ static int max310x_request_port(struct uart_port *port) return 0; } -static void max310x_release_port(struct uart_port *port) -{ - /* Do nothing */ -} - static void max310x_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) port->type = PORT_MAX310X; } -static int max310x_verify_port(struct uart_port *port, struct serial_struct *ser) +static int max310x_verify_port(struct uart_port *port, struct serial_struct *s) { - if ((ser->type == PORT_UNKNOWN) || (ser->type == PORT_MAX310X)) - return 0; - if (ser->irq == port->irq) - return 0; + if ((s->type != PORT_UNKNOWN) && (s->type != PORT_MAX310X)) + return -EINVAL; + if (s->irq != port->irq) + return -EINVAL; - return -EINVAL; + return 0; } -static struct uart_ops max310x_ops = { +static void max310x_null_void(struct uart_port *port) +{ + /* Do nothing */ +} + +static const struct uart_ops max310x_ops = { .tx_empty = max310x_tx_empty, .set_mctrl = max310x_set_mctrl, .get_mctrl = max310x_get_mctrl, - .stop_tx = max310x_stop_tx, + .stop_tx = max310x_null_void, .start_tx = max310x_start_tx, - .stop_rx = max310x_stop_rx, - .enable_ms = max310x_enable_ms, + .stop_rx = max310x_null_void, + .enable_ms = max310x_null_void, .break_ctl = max310x_break_ctl, .startup = max310x_startup, .shutdown = max310x_shutdown, .set_termios = max310x_set_termios, .type = max310x_type, .request_port = max310x_request_port, - .release_port = max310x_release_port, + .release_port = max310x_null_void, .config_port = max310x_config_port, .verify_port = max310x_verify_port, }; -#ifdef CONFIG_PM_SLEEP - -static int max310x_suspend(struct device *dev) +static int __maybe_unused max310x_suspend(struct spi_device *spi, + pm_message_t state) { - int ret; - struct max310x_port *s = dev_get_drvdata(dev); - - dev_dbg(dev, "Suspend\n"); + struct max310x_port *s = dev_get_drvdata(&spi->dev); + int i; - ret = uart_suspend_port(&s->uart, &s->port); - - mutex_lock(&s->max310x_mutex); - - /* Enable sleep mode */ - regmap_update_bits(s->regmap, MAX310X_MODE1_REG, - MAX310X_MODE1_FORCESLEEP_BIT, - MAX310X_MODE1_FORCESLEEP_BIT); - - mutex_unlock(&s->max310x_mutex); - - if (s->pdata->suspend) - s->pdata->suspend(1); + for (i = 0; i < s->uart.nr; i++) { + uart_suspend_port(&s->uart, &s->p[i].port); + s->devtype->power(&s->p[i].port, 0); + } - return ret; + return 0; } -static int max310x_resume(struct device *dev) +static int __maybe_unused max310x_resume(struct spi_device *spi) { - struct max310x_port *s = dev_get_drvdata(dev); - - dev_dbg(dev, "Resume\n"); - - if (s->pdata->suspend) - s->pdata->suspend(0); - - mutex_lock(&s->max310x_mutex); + struct max310x_port *s = dev_get_drvdata(&spi->dev); + int i; - /* Disable sleep mode */ - regmap_update_bits(s->regmap, MAX310X_MODE1_REG, - MAX310X_MODE1_FORCESLEEP_BIT, - 0); - - max310x_wait_pll(s); - - mutex_unlock(&s->max310x_mutex); + for (i = 0; i < s->uart.nr; i++) { + s->devtype->power(&s->p[i].port, 1); + uart_resume_port(&s->uart, &s->p[i].port); + } - return uart_resume_port(&s->uart, &s->port); + return 0; } -static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); -#define MAX310X_PM_OPS (&max310x_pm_ops) - -#else -#define MAX310X_PM_OPS NULL -#endif - #ifdef CONFIG_GPIOLIB static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) { - unsigned int val = 0; + unsigned int val; struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + struct uart_port *port = &s->p[offset / 4].port; - mutex_lock(&s->max310x_mutex); - regmap_read(s->regmap, MAX310X_GPIODATA_REG, &val); - mutex_unlock(&s->max310x_mutex); + val = max310x_port_read(port, MAX310X_GPIODATA_REG); - return !!((val >> 4) & (1 << offset)); + return !!((val >> 4) & (1 << (offset % 4))); } static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + struct uart_port *port = &s->p[offset / 4].port; - mutex_lock(&s->max310x_mutex); - regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ? - 1 << offset : 0); - mutex_unlock(&s->max310x_mutex); + max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), + value ? 1 << (offset % 4) : 0); } static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + struct uart_port *port = &s->p[offset / 4].port; - mutex_lock(&s->max310x_mutex); - - regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, 0); - - mutex_unlock(&s->max310x_mutex); + max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), 0); return 0; } @@ -977,74 +985,42 @@ static int max310x_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) { struct max310x_port *s = container_of(chip, struct max310x_port, gpio); + struct uart_port *port = &s->p[offset / 4].port; - mutex_lock(&s->max310x_mutex); - - regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, - 1 << offset); - regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ? - 1 << offset : 0); - - mutex_unlock(&s->max310x_mutex); + max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), + value ? 1 << (offset % 4) : 0); + max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), + 1 << (offset % 4)); return 0; } #endif -/* Generic platform data */ -static struct max310x_pdata generic_plat_data = { - .driver_flags = MAX310X_EXT_CLK, - .uart_flags[0] = MAX310X_ECHO_SUPRESS, - .frequency = 26000000, -}; - -static int max310x_probe(struct spi_device *spi) +static int max310x_probe(struct device *dev, int is_spi, + struct max310x_devtype *devtype, int irq) { struct max310x_port *s; - struct device *dev = &spi->dev; - int chiptype = spi_get_device_id(spi)->driver_data; - struct max310x_pdata *pdata = dev->platform_data; - unsigned int val = 0; - int ret; + struct max310x_pdata *pdata = dev_get_platdata(dev); + int i, ret, uartclk; /* Check for IRQ */ - if (spi->irq <= 0) { + if (irq <= 0) { dev_err(dev, "No IRQ specified\n"); return -ENOTSUPP; } + if (!pdata) { + dev_err(dev, "No platform data supplied\n"); + return -EINVAL; + } + /* Alloc port structure */ - s = devm_kzalloc(dev, sizeof(struct max310x_port), GFP_KERNEL); + s = devm_kzalloc(dev, sizeof(*s) + + sizeof(struct max310x_one) * devtype->nr, GFP_KERNEL); if (!s) { dev_err(dev, "Error allocating port structure\n"); return -ENOMEM; } - dev_set_drvdata(dev, s); - - if (!pdata) { - dev_warn(dev, "No platform data supplied, using defaults\n"); - pdata = &generic_plat_data; - } - s->pdata = pdata; - - /* Individual chip settings */ - switch (chiptype) { - case MAX310X_TYPE_MAX3107: - s->name = "MAX3107"; - s->nr_gpio = 4; - s->uart.nr = 1; - s->regcfg.max_register = 0x1f; - break; - case MAX310X_TYPE_MAX3108: - s->name = "MAX3108"; - s->nr_gpio = 4; - s->uart.nr = 1; - s->regcfg.max_register = 0x1e; - break; - default: - dev_err(dev, "Unsupported chip type %i\n", chiptype); - return -ENOTSUPP; - } /* Check input frequency */ if ((pdata->driver_flags & MAX310X_EXT_CLK) && @@ -1055,13 +1031,11 @@ static int max310x_probe(struct spi_device *spi) ((pdata->frequency < 1000000) || (pdata->frequency > 4000000))) goto err_freq; - mutex_init(&s->max310x_mutex); + s->pdata = pdata; + s->devtype = devtype; + dev_set_drvdata(dev, s); - /* Setup SPI bus */ - spi->mode = SPI_MODE_0; - spi->bits_per_word = 8; - spi->max_speed_hz = 26000000; - spi_setup(spi); + mutex_init(&s->mutex); /* Setup regmap */ s->regcfg.reg_bits = 8; @@ -1069,109 +1043,100 @@ static int max310x_probe(struct spi_device *spi) s->regcfg.read_flag_mask = 0x00; s->regcfg.write_flag_mask = 0x80; s->regcfg.cache_type = REGCACHE_RBTREE; - s->regcfg.writeable_reg = max3107_8_reg_writeable; + s->regcfg.writeable_reg = max310x_reg_writeable; s->regcfg.volatile_reg = max310x_reg_volatile; s->regcfg.precious_reg = max310x_reg_precious; - s->regmap = devm_regmap_init_spi(spi, &s->regcfg); + s->regcfg.max_register = devtype->nr * 0x20 - 1; + + if (IS_ENABLED(CONFIG_SPI_MASTER) && is_spi) { + struct spi_device *spi = to_spi_device(dev); + + s->regmap = devm_regmap_init_spi(spi, &s->regcfg); + } else + return -ENOTSUPP; + if (IS_ERR(s->regmap)) { - ret = PTR_ERR(s->regmap); dev_err(dev, "Failed to initialize register map\n"); - goto err_out; - } - - /* Reset chip & check SPI function */ - ret = regmap_write(s->regmap, MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT); - if (ret) { - dev_err(dev, "SPI transfer failed\n"); - goto err_out; - } - /* Clear chip reset */ - regmap_write(s->regmap, MAX310X_MODE2_REG, 0); - - switch (chiptype) { - case MAX310X_TYPE_MAX3107: - /* Check REV ID to ensure we are talking to what we expect */ - regmap_read(s->regmap, MAX3107_REVID_REG, &val); - if (((val & MAX3107_REV_MASK) != MAX3107_REV_ID)) { - dev_err(dev, "%s ID 0x%02x does not match\n", - s->name, val); - ret = -ENODEV; - goto err_out; - } - break; - case MAX310X_TYPE_MAX3108: - /* MAX3108 have not REV ID register, we just check default value - * from clocksource register to make sure everything works. - */ - regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); - if (val != (MAX310X_CLKSRC_EXTCLK_BIT | - MAX310X_CLKSRC_PLLBYP_BIT)) { - dev_err(dev, "%s not present\n", s->name); - ret = -ENODEV; - goto err_out; - } - break; + return PTR_ERR(s->regmap); } /* Board specific configure */ - if (pdata->init) - pdata->init(); - if (pdata->suspend) - pdata->suspend(0); - - /* Calculate referecne clock */ - s->uartclk = max310x_set_ref_clk(s); - - /* Disable all interrupts */ - regmap_write(s->regmap, MAX310X_IRQEN_REG, 0); - - /* Setup MODE1 register */ - val = MAX310X_MODE1_IRQSEL_BIT; /* Enable IRQ pin */ - if (pdata->driver_flags & MAX310X_AUTOSLEEP) - val = MAX310X_MODE1_AUTOSLEEP_BIT; - regmap_write(s->regmap, MAX310X_MODE1_REG, val); - - /* Setup interrupt */ - ret = devm_request_threaded_irq(dev, spi->irq, NULL, max310x_ist, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - dev_name(dev), s); - if (ret) { - dev_err(dev, "Unable to reguest IRQ %i\n", spi->irq); - goto err_out; + if (s->pdata->init) + s->pdata->init(); + + /* Check device to ensure we are talking to what we expect */ + ret = devtype->detect(dev); + if (ret) + return ret; + + for (i = 0; i < devtype->nr; i++) { + unsigned int offs = i << 5; + + /* Reset port */ + regmap_write(s->regmap, MAX310X_MODE2_REG + offs, + MAX310X_MODE2_RST_BIT); + /* Clear port reset */ + regmap_write(s->regmap, MAX310X_MODE2_REG + offs, 0); + + /* Wait for port startup */ + do { + regmap_read(s->regmap, + MAX310X_BRGDIVLSB_REG + offs, &ret); + } while (ret != 0x01); + + regmap_update_bits(s->regmap, MAX310X_MODE1_REG + offs, + MAX310X_MODE1_AUTOSLEEP_BIT, + MAX310X_MODE1_AUTOSLEEP_BIT); } + uartclk = max310x_set_ref_clk(s); + dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); + /* Register UART driver */ s->uart.owner = THIS_MODULE; - s->uart.driver_name = dev_name(dev); s->uart.dev_name = "ttyMAX"; s->uart.major = MAX310X_MAJOR; s->uart.minor = MAX310X_MINOR; + s->uart.nr = devtype->nr; ret = uart_register_driver(&s->uart); if (ret) { dev_err(dev, "Registering UART driver failed\n"); - goto err_out; + return ret; } - /* Initialize workqueue for start TX */ - s->wq = create_freezable_workqueue(dev_name(dev)); - INIT_WORK(&s->tx_work, max310x_wq_proc); - - /* Initialize UART port data */ - s->port.line = 0; - s->port.dev = dev; - s->port.irq = spi->irq; - s->port.type = PORT_MAX310X; - s->port.fifosize = MAX310X_FIFO_SIZE; - s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; - s->port.iotype = UPIO_PORT; - s->port.membase = (void __iomem *)0xffffffff; /* Bogus value */ - s->port.uartclk = s->uartclk; - s->port.ops = &max310x_ops; - uart_add_one_port(&s->uart, &s->port); + for (i = 0; i < devtype->nr; i++) { + /* Initialize port data */ + s->p[i].port.line = i; + s->p[i].port.dev = dev; + s->p[i].port.irq = irq; + s->p[i].port.type = PORT_MAX310X; + s->p[i].port.fifosize = MAX310X_FIFO_SIZE; + s->p[i].port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE | + UPF_LOW_LATENCY; + s->p[i].port.iotype = UPIO_PORT; + s->p[i].port.iobase = i * 0x20; + s->p[i].port.membase = (void __iomem *)~0; + s->p[i].port.uartclk = uartclk; + s->p[i].port.ops = &max310x_ops; + /* Disable all interrupts */ + max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0); + /* Clear IRQ status register */ + max310x_port_read(&s->p[i].port, MAX310X_IRQSTS_REG); + /* Enable IRQ pin */ + max310x_port_update(&s->p[i].port, MAX310X_MODE1_REG, + MAX310X_MODE1_IRQSEL_BIT, + MAX310X_MODE1_IRQSEL_BIT); + /* Initialize queue for start TX */ + INIT_WORK(&s->p[i].tx_work, max310x_wq_proc); + /* Register port */ + uart_add_one_port(&s->uart, &s->p[i].port); + /* Go to suspend mode */ + devtype->power(&s->p[i].port, 0); + } #ifdef CONFIG_GPIOLIB /* Setup GPIO cotroller */ - if (pdata->gpio_base) { + if (s->pdata->gpio_base) { s->gpio.owner = THIS_MODULE; s->gpio.dev = dev; s->gpio.label = dev_name(dev); @@ -1179,86 +1144,105 @@ static int max310x_probe(struct spi_device *spi) s->gpio.get = max310x_gpio_get; s->gpio.direction_output= max310x_gpio_direction_output; s->gpio.set = max310x_gpio_set; - s->gpio.base = pdata->gpio_base; - s->gpio.ngpio = s->nr_gpio; + s->gpio.base = s->pdata->gpio_base; + s->gpio.ngpio = devtype->nr * 4; s->gpio.can_sleep = 1; - if (gpiochip_add(&s->gpio)) { - /* Indicate that we should not call gpiochip_remove */ - s->gpio.base = 0; - } + if (!gpiochip_add(&s->gpio)) + s->gpio_used = 1; } else dev_info(dev, "GPIO support not enabled\n"); #endif - /* Go to suspend mode */ - if (pdata->suspend) - pdata->suspend(1); + /* Setup interrupt */ + ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), s); + if (ret) { + dev_err(dev, "Unable to reguest IRQ %i\n", irq); +#ifdef CONFIG_GPIOLIB + if (s->gpio_used) + WARN_ON(gpiochip_remove(&s->gpio)); +#endif + } - return 0; + return ret; err_freq: dev_err(dev, "Frequency parameter incorrect\n"); - ret = -EINVAL; - -err_out: - dev_set_drvdata(dev, NULL); - - return ret; + return -EINVAL; } -static int max310x_remove(struct spi_device *spi) +static int max310x_remove(struct device *dev) { - struct device *dev = &spi->dev; struct max310x_port *s = dev_get_drvdata(dev); - int ret = 0; - - dev_dbg(dev, "Removing port\n"); - - devm_free_irq(dev, s->port.irq, s); + int i, ret = 0; - destroy_workqueue(s->wq); - - uart_remove_one_port(&s->uart, &s->port); + for (i = 0; i < s->uart.nr; i++) { + cancel_work_sync(&s->p[i].tx_work); + uart_remove_one_port(&s->uart, &s->p[i].port); + s->devtype->power(&s->p[i].port, 0); + } uart_unregister_driver(&s->uart); #ifdef CONFIG_GPIOLIB - if (s->pdata->gpio_base) { + if (s->gpio_used) ret = gpiochip_remove(&s->gpio); - if (ret) - dev_err(dev, "Failed to remove gpio chip: %d\n", ret); - } #endif - dev_set_drvdata(dev, NULL); - - if (s->pdata->suspend) - s->pdata->suspend(1); if (s->pdata->exit) s->pdata->exit(); return ret; } +#ifdef CONFIG_SPI_MASTER +static int max310x_spi_probe(struct spi_device *spi) +{ + struct max310x_devtype *devtype = + (struct max310x_devtype *)spi_get_device_id(spi)->driver_data; + int ret; + + /* Setup SPI bus */ + spi->bits_per_word = 8; + spi->mode = spi->mode ? : SPI_MODE_0; + spi->max_speed_hz = spi->max_speed_hz ? : 26000000; + ret = spi_setup(spi); + if (ret) { + dev_err(&spi->dev, "SPI setup failed\n"); + return ret; + } + + return max310x_probe(&spi->dev, 1, devtype, spi->irq); +} + +static int max310x_spi_remove(struct spi_device *spi) +{ + return max310x_remove(&spi->dev); +} + +static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); + static const struct spi_device_id max310x_id_table[] = { - { "max3107", MAX310X_TYPE_MAX3107 }, - { "max3108", MAX310X_TYPE_MAX3108 }, + { "max3107", (kernel_ulong_t)&max3107_devtype, }, + { "max3108", (kernel_ulong_t)&max3108_devtype, }, { } }; MODULE_DEVICE_TABLE(spi, max310x_id_table); -static struct spi_driver max310x_driver = { +static struct spi_driver max310x_uart_driver = { .driver = { - .name = "max310x", + .name = MAX310X_NAME, .owner = THIS_MODULE, - .pm = MAX310X_PM_OPS, + .pm = &max310x_pm_ops, }, - .probe = max310x_probe, - .remove = max310x_remove, + .probe = max310x_spi_probe, + .remove = max310x_spi_remove, .id_table = max310x_id_table, }; -module_spi_driver(max310x_driver); +module_spi_driver(max310x_uart_driver); +#endif -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); MODULE_DESCRIPTION("MAX310X serial driver"); |