Merge tag 'tty-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty and serial driver update for 4.8-rc1.

  Lots of good cleanups from Jiri on a number of vt and other tty
  related things, and the normal driver updates.  Full details are in
  the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
  tty/serial: atmel: enforce tasklet init and termination sequences
  serial: sh-sci: Stop transfers in sci_shutdown()
  serial: 8250_ingenic: drop #if conditional surrounding earlycon code
  serial: 8250_mtk: drop !defined(MODULE) conditional
  serial: 8250_uniphier: drop !defined(MODULE) conditional
  earlycon: mark earlycon code as __used iif the caller is built-in
  tty/serial/8250: use mctrl_gpio helpers
  serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  serial: mctrl_gpio: add modem control read routine
  tty/serial/8250: make UART_MCR register access consistent
  serial: 8250_mid: Read RX buffer on RX DMA timeout for DNV
  serial: 8250_dma: Export serial8250_rx_dma_flush()
  dmaengine: hsu: Export hsu_dma_get_status()
  tty: serial: 8250: add CON_CONSDEV to flags
  tty: serial: samsung: add byte-order aware bit functions
  tty: serial: samsung: fixup accessors for endian
  serial: sirf: make fifo functions static
  serial: mps2-uart: make driver explicitly non-modular
  serial: mvebu-uart: free the IRQ in ->shutdown()
  serial/bcm63xx_uart: use correct alias naming
  ...

1 files changed, 17 insertions, 8 deletions

diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 7a4fa18..ffa6d68 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -105,13 +105,16 @@ enum {
 #define SCFCR_LOOP	BIT(0)	/* Loopback Test */
 
 /* SCLSR (Line Status Register) on (H)SCIF */
+#define SCLSR_TO	BIT(2)	/* Timeout */
 #define SCLSR_ORER	BIT(0)	/* Overrun Error */
 
 /* SCSPTR (Serial Port Register), optional */
-#define SCSPTR_RTSIO	BIT(7)	/* Serial Port RTS Pin Input/Output */
-#define SCSPTR_RTSDT	BIT(6)	/* Serial Port RTS Pin Data */
-#define SCSPTR_CTSIO	BIT(5)	/* Serial Port CTS Pin Input/Output */
-#define SCSPTR_CTSDT	BIT(4)	/* Serial Port CTS Pin Data */
+#define SCSPTR_RTSIO	BIT(7)	/* Serial Port RTS# Pin Input/Output */
+#define SCSPTR_RTSDT	BIT(6)	/* Serial Port RTS# Pin Data */
+#define SCSPTR_CTSIO	BIT(5)	/* Serial Port CTS# Pin Input/Output */
+#define SCSPTR_CTSDT	BIT(4)	/* Serial Port CTS# Pin Data */
+#define SCSPTR_SCKIO	BIT(3)	/* Serial Port Clock Pin Input/Output */
+#define SCSPTR_SCKDT	BIT(2)	/* Serial Port Clock Pin Data */
 #define SCSPTR_SPB2IO	BIT(1)	/* Serial Port Break Input/Output */
 #define SCSPTR_SPB2DT	BIT(0)	/* Serial Port Break Data */
 
@@ -119,12 +122,18 @@ enum {
 #define HSCIF_SRE	BIT(15)	/* Sampling Rate Register Enable */
 
 /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
-#define SCPCR_RTSC	BIT(4)	/* Serial Port RTS Pin / Output Pin */
-#define SCPCR_CTSC	BIT(3)	/* Serial Port CTS Pin / Input Pin */
+#define SCPCR_RTSC	BIT(4)	/* Serial Port RTS# Pin / Output Pin */
+#define SCPCR_CTSC	BIT(3)	/* Serial Port CTS# Pin / Input Pin */
+#define SCPCR_SCKC	BIT(2)	/* Serial Port SCK Pin / Output Pin */
+#define SCPCR_RXDC	BIT(1)	/* Serial Port RXD Pin / Input Pin */
+#define SCPCR_TXDC	BIT(0)	/* Serial Port TXD Pin / Output Pin */
 
 /* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
-#define SCPDR_RTSD	BIT(4)	/* Serial Port RTS Output Pin Data */
-#define SCPDR_CTSD	BIT(3)	/* Serial Port CTS Input Pin Data */
+#define SCPDR_RTSD	BIT(4)	/* Serial Port RTS# Output Pin Data */
+#define SCPDR_CTSD	BIT(3)	/* Serial Port CTS# Input Pin Data */
+#define SCPDR_SCKD	BIT(2)	/* Serial Port SCK Output Pin Data */
+#define SCPDR_RXDD	BIT(1)	/* Serial Port RXD Input Pin Data */
+#define SCPDR_TXDD	BIT(0)	/* Serial Port TXD Output Pin Data */
 
 /*
  * BRG Clock Select Register (Some SCIF and HSCIF)