diff options
author | Robert P. J. Day <rpjday@mindspring.com> | 2007-10-19 21:10:43 (GMT) |
---|---|---|
committer | Adrian Bunk <bunk@kernel.org> | 2007-10-19 21:10:43 (GMT) |
commit | 3a4fa0a25da81600ea0bcd75692ae8ca6050d165 (patch) | |
tree | a4de1662e645c029cf3cf58f0646cbb1959861dc /drivers | |
parent | 18735dd8d2d37031b97f9e9e106acbaed01eb896 (diff) | |
download | linux-3a4fa0a25da81600ea0bcd75692ae8ca6050d165.tar.xz |
Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Diffstat (limited to 'drivers')
47 files changed, 66 insertions, 66 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 10bc3f6..47c8060 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1479,7 +1479,7 @@ static void ahci_port_intr(struct ata_port *ap) return; } - /* hmmm... a spurious interupt */ + /* hmmm... a spurious interrupt */ /* if !NCQ, ignore. No modern ATA device has broken HSM * implementation for non-NCQ commands. diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index f9e4cd5..8227c45 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -856,7 +856,7 @@ err_out: * @pdev: PCI device * * Some PCI ATA devices report simplex mode but in fact can be told to - * enter non simplex mode. This implements the neccessary logic to + * enter non simplex mode. This implements the necessary logic to * perform the task on such devices. Calling it on other devices will * have -undefined- behaviour. */ diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 57e827e..e1818fd 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -138,7 +138,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Specifically we have a problem that there is only + * necessary. Specifically we have a problem that there is only * one MWDMA/UDMA bit. */ diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 3578593..0132453 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -25,7 +25,7 @@ * Documentation: * Available from AMD web site. * TODO - * Review errata to see if serializing is neccessary + * Review errata to see if serializing is necessary */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 988ef73..ca9aae0 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -105,7 +105,7 @@ struct it821x_dev /* * We allow users to force the card into non raid mode without - * flashing the alternative BIOS. This is also neccessary right now + * flashing the alternative BIOS. This is also necessary right now * for embedded platforms that cannot run a PC BIOS but are using this * device. */ @@ -383,7 +383,7 @@ static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc) * @ap: ATA port * @device: Device number (not pointer) * - * Device selection hook. If neccessary perform clock switching + * Device selection hook. If necessary perform clock switching */ static void it821x_passthru_dev_select(struct ata_port *ap, diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index d548308..c0d9e0c 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -129,7 +129,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * necessary. Our logic also clears TIME0/TIME1 for the other device so * that, even if we get this wrong, cycles to the other device will * be made PIO0. */ diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 6e8e557..9fe66fd 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -124,7 +124,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. + * necessary. */ static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc) diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 3cd5eb2..44da09a 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -200,7 +200,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * necessary. Our logic also clears TIME0/TIME1 for the other device so * that, even if we get this wrong, cycles to the other device will * be made PIO0. */ diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index d5b7649..8109b08 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -161,7 +161,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * necessary. Our logic also clears TIME0/TIME1 for the other device so * that, even if we get this wrong, cycles to the other device will * be made PIO0. */ diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 21ebc48..725a858 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -156,7 +156,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. Specifically we have a problem that there is only + * necessary. Specifically we have a problem that there is only * one MWDMA/UDMA bit. */ diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 4dc2e73..5c1e9cb 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -16,7 +16,7 @@ * * If you have strange problems with nVidia chipset systems please * see the SI support documentation and update your system BIOS - * if neccessary + * if necessary * * TODO * If we know all our devices are LBA28 (or LBA28 sized) we could use diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 5d41b66..ea7a9a6 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -420,7 +420,7 @@ static struct ata_port_operations via_port_ops_noirq = { * @pdev: PCI device * @flags: configuration flags * - * Set the FIFO properties for this device if neccessary. Used both on + * Set the FIFO properties for this device if necessary. Used both on * set up and on and the resume path */ diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 94ebc9d..f8f7139 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1596,7 +1596,7 @@ static irqreturn_t fs_irq (int irq, void *dev_id) /* print the bits in the ISR register. */ if (fs_debug & FS_DEBUG_IRQ) { - /* The FS_DEBUG things are unneccesary here. But this way it is + /* The FS_DEBUG things are unnecessary here. But this way it is clear for grep that these are debug prints. */ fs_dprintk (FS_DEBUG_IRQ, "IRQ status:"); for (i=0;i<27;i++) diff --git a/drivers/block/rd.c b/drivers/block/rd.c index 08176d2..47f8ac6 100644 --- a/drivers/block/rd.c +++ b/drivers/block/rd.c @@ -365,7 +365,7 @@ static int rd_open(struct inode *inode, struct file *filp) /* * Deep badness. rd_blkdev_pagecache_IO() needs to allocate * pagecache pages within a request_fn. We cannot recur back - * into the filesytem which is mounted atop the ramdisk, because + * into the filesystem which is mounted atop the ramdisk, because * that would deadlock on fs locks. And we really don't want * to reenter rd_blkdev_pagecache_IO when we're already within * that function. diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index 0380569..596c717 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -437,7 +437,7 @@ static inline void finish_erasing(struct tty_struct *tty) * @c: character input * @tty: terminal device * - * Perform erase and neccessary output when an erase character is + * Perform erase and necessary output when an erase character is * present in the stream from the driver layer. Handles the complexities * of UTF-8 multibyte symbols. */ @@ -657,7 +657,7 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty) * @c: character * * Process a parity error and queue the right data to indicate - * the error case if neccessary. Locking as per n_tty_receive_buf. + * the error case if necessary. Locking as per n_tty_receive_buf. */ static inline void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 7e6a3a4..d83419c 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -563,7 +563,7 @@ static void rp_do_poll(unsigned long dummy) /* Get a ptr to the board's control struct */ ctlp = sCtlNumToCtlPtr(ctrl); - /* Get the interupt status from the board */ + /* Get the interrupt status from the board */ #ifdef CONFIG_PCI if (ctlp->BusType == isPCI) CtlMask = sPCIGetControllerIntStatus(ctlp); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 13a5357..f36fecd 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -943,7 +943,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_deref); * @tty: terminal to activate ldisc on * * Set the TTY_LDISC flag when the line discipline can be called - * again. Do neccessary wakeups for existing sleepers. + * again. Do necessary wakeups for existing sleepers. * * Note: nobody should set this bit except via this function. Clearing * directly is allowed. @@ -1504,7 +1504,7 @@ EXPORT_SYMBOL(tty_hangup); * * The user has asked via system call for the terminal to be hung up. * We do this synchronously so that when the syscall returns the process - * is complete. That guarantee is neccessary for security reasons. + * is complete. That guarantee is necessary for security reasons. */ void tty_vhangup(struct tty_struct * tty) @@ -1691,7 +1691,7 @@ EXPORT_SYMBOL(stop_tty); * @tty: tty to start * * Start a tty that has been stopped if at all possible. Perform - * any neccessary wakeups and propagate the TIOCPKT status. If this + * any necessary wakeups and propagate the TIOCPKT status. If this * is the tty was previous stopped and is being started then the * driver start method is invoked and the line discipline woken. * @@ -2877,7 +2877,7 @@ static int tty_fasync(int fd, struct file * filp, int on) * @tty: tty to fake input into * @p: pointer to character * - * Fake input to a tty device. Does the neccessary locking and + * Fake input to a tty device. Does the necessary locking and * input management. * * FIXME: does not honour flow control ?? diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 0def089..7a00350 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -444,7 +444,7 @@ static void change_termios(struct tty_struct * tty, struct ktermios * new_termio * @arg: user data * @opt: option information * - * Helper function to prepare termios data and run neccessary other + * Helper function to prepare termios data and run necessary other * functions before using change_termios to do the actual changes. * * Locking: diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1fa5794..b463cef 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -565,7 +565,7 @@ typedef struct os_dat_s { * The following parameter is used to select the point in the internal * tape fifo in which we will start to refill the buffer. Decreasing * the following parameter will improve the system's latency and - * interactive response, while using a high value might improve sytem + * interactive response, while using a high value might improve system * throughput. */ #define IDETAPE_FIFO_THRESHOLD 2 diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index ec45b72..08e820e 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -95,7 +95,7 @@ struct it821x_dev /* * We allow users to force the card into non raid mode without - * flashing the alternative BIOS. This is also neccessary right now + * flashing the alternative BIOS. This is also necessary right now * for embedded platforms that cannot run a PC BIOS but are using this * device. */ @@ -564,7 +564,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) /* * Not in the docs but according to the reference driver - * this is neccessary. + * this is necessary. */ pci_read_config_byte(hwif->pci_dev, 0x08, &conf); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 689786d..1353afb 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -26,7 +26,7 @@ * * If you have strange problems with nVidia chipset systems please * see the SI support documentation and update your system BIOS - * if neccessary + * if necessary * * The Dell DRAC4 has some interesting features including effectively hot * unplugging/replugging the virtual CD interface when the DRAC is reset. diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 64fee90..4a5849b 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -112,7 +112,7 @@ static void clone_init(struct dm_crypt_io *, struct bio *); * Different IV generation algorithms: * * plain: the initial vector is the 32-bit little-endian version of the sector - * number, padded with zeros if neccessary. + * number, padded with zeros if necessary. * * essiv: "encrypted sector|salt initial vector", the sector number is * encrypted with the bulk cipher using a salt as key. The salt diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c index eca602d..85e36a1d 100644 --- a/drivers/media/dvb/bt8xx/bt878.c +++ b/drivers/media/dvb/bt8xx/bt878.c @@ -280,7 +280,7 @@ static irqreturn_t bt878_irq(int irq, void *dev_id) if (!(astat = (stat & mask))) return IRQ_NONE; /* this interrupt is not for me */ /* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */ - btwrite(astat, BT878_AINT_STAT); /* try to clear interupt condition */ + btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */ if (astat & (BT878_ASCERR | BT878_AOCERR)) { diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 288e79f..7902ae1 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -128,7 +128,7 @@ struct ttusb { struct dvb_frontend* fe; }; -/* ugly workaround ... don't know why it's neccessary to read */ +/* ugly workaround ... don't know why it's necessary to read */ /* all result codes. */ #define DEBUG 0 diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index dd6a7d6..3162223 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4709,18 +4709,18 @@ adtvk503_audio(struct bttv *btv, struct video_audio *v, int set) * * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. * GPIO pins are wired as: - * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler) - * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler) - * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler) - * GPIO[8] - - P3[5] (microcontroler) - * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler) - * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler) - * GPINTR - - P3[4] (microcontroler) + * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) + * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) + * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) + * GPIO[8] - - P3[5] (microcontroller) + * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) + * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) + * GPINTR - - P3[4] (microcontroller) * - * The microcontroler is a 80C32 like. It should be possible to change xpoint - * configuration either directly (as we are doing) or using the microcontroler + * The microcontroller is a 80C32 like. It should be possible to change xpoint + * configuration either directly (as we are doing) or using the microcontroller * which is also wired to I2C interface. I have no further info on the - * microcontroler features, one would need to disassembly the firmware. + * microcontroller features, one would need to disassembly the firmware. * note: the vendor refused to give any information on this product, all * that stuff was found using a multimeter! :) */ @@ -4788,7 +4788,7 @@ static void tibetCS16_init(struct bttv *btv) * The analog switch is controlled by the "master", but the detection order * of the four BT878A chips is in an order which I just don't understand. * The "master" is actually the second controller to be detected. The - * logic on the board uses logical numbers for the 4 controlers, but + * logic on the board uses logical numbers for the 4 controllers, but * those numbers are different from the detection sequence. When working * with the analog switch, we need to "map" from the detection sequence * over to the board's logical controller number. This mapping sequence diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index b8d5327..e467682 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -907,7 +907,7 @@ static int em28xx_set_fmt(struct em28xx *dev, unsigned int cmd, struct v4l2_form /* stop io in case it is already in progress */ if (dev->stream == STREAM_ON) { - em28xx_videodbg("VIDIOC_SET_FMT: interupting stream\n"); + em28xx_videodbg("VIDIOC_SET_FMT: interrupting stream\n"); if ((ret = em28xx_stream_interrupt(dev))) return ret; } diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 1bfbb87..fc70fba 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -277,7 +277,7 @@ static void do_sony_laptop_release_key(struct work_struct *work) static DECLARE_WORK(sony_laptop_release_key_work, do_sony_laptop_release_key); -/* forward event to the input subsytem */ +/* forward event to the input subsystem */ static void sony_laptop_report_input_event(u8 event) { struct input_dev *jog_dev = sony_laptop_input.jog_dev; diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index 1cc74ec..eebf5bb 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1111,7 +1111,7 @@ static struct net_device_stats *amd8111e_get_stats(struct net_device * dev) return new_stats; } -/* This function recalculate the interupt coalescing mode on every interrupt +/* This function recalculate the interrupt coalescing mode on every interrupt according to the datarate and the packet rate. */ static int amd8111e_calc_coalesce(struct net_device *dev) diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 185f98e..504b7ce 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -542,7 +542,7 @@ static struct { static int num_ifs; /* - * Setup the base address and interupt of the Au1xxx ethernet macs + * Setup the base address and interrupt of the Au1xxx ethernet macs * based on cpu type and whether the interface is enabled in sys_pinfunc * register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0. */ diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 80c0c8c..855dc10 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -55,7 +55,7 @@ static int expected_refcount = -1; static struct class *netdev_class; /*--------------------------- Data Structures -----------------------------*/ -/* Bonding sysfs lock. Why can't we just use the subsytem lock? +/* Bonding sysfs lock. Why can't we just use the subsystem lock? * Because kobject_register tries to acquire the subsystem lock. If * we already hold the lock (which we would if the user was creating * a new bond through the sysfs interface), we deadlock. diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 64f35e2..3dbaec6 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1324,7 +1324,7 @@ static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb, if (!--counter) break; } - /* ack any interupts, something could have been set */ + /* ack any interrupts, something could have been set */ iowrite8(~0, &nic->csr->scb.stat_ack); /* if the command failed, or is not OK, notify and return */ diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index a82d8f9..1257e1a 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -595,7 +595,7 @@ toshoboe_startchip (struct toshoboe_cb *self) OUTB ((physaddr >> 18) & 0xff, OBOE_RING_BASE1); OUTB ((physaddr >> 26) & 0x3f, OBOE_RING_BASE2); - /*Enable DMA controler in byte mode and RX */ + /*Enable DMA controller in byte mode and RX */ OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H); /* Start up the clocks */ diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 7c60df4..dd18af0 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1223,7 +1223,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id) } #endif - /* Handle PHY interupt condition */ + /* Handle PHY interrupt condition */ if (status & INT_STS_PHY_INT_) { DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name); smc911x_phy_interrupt(dev); diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 571060a..bccae7e 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1639,7 +1639,7 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg) /** * spider_net_interrupt - interrupt handler for spider_net - * @irq: interupt number + * @irq: interrupt number * @ptr: pointer to net_device * @regs: PU registers * diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index 8038f28..d887c05 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -1654,7 +1654,7 @@ tc35815_rx(struct net_device *dev) panic_queues(dev); } #endif - /* pass BD to controler */ + /* pass BD to controller */ #ifndef TC35815_USE_PACKEDBUFFER if (!lp->rx_skbs[curid].skb) { lp->rx_skbs[curid].skb = @@ -1694,7 +1694,7 @@ tc35815_rx(struct net_device *dev) } #endif for (i = 0; i < (bd_count + 1) / 2 + 1; i++) { - /* pass FD to controler */ + /* pass FD to controller */ #ifdef DEBUG lp->rfd_cur->fd.FDNext = cpu_to_le32(0xdeaddead); #else diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 4ae0579..5c4a92d 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1648,7 +1648,7 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx) * * Scan the queues looking for transmitted packets that * we can complete and clean up. Update any statistics as - * neccessary/ + * necessary/ */ static int velocity_tx_srv(struct velocity_info *vptr, u32 status) diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index 8b9d68f..69402f3 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2001,7 +2001,7 @@ dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense) switch (sense[28]) { case 0x17: /* issue a Diagnostic Control command with an - * Inhibit Write subcommand and controler modifier */ + * Inhibit Write subcommand and controller modifier */ erp = dasd_3990_erp_DCTL(erp, 0x20); break; diff --git a/drivers/s390/char/sclp_cpi.c b/drivers/s390/char/sclp_cpi.c index 29fe2a5..82a13d9 100644 --- a/drivers/s390/char/sclp_cpi.c +++ b/drivers/s390/char/sclp_cpi.c @@ -157,7 +157,7 @@ cpi_prepare_req(void) sclp_ascebc_str(evb->system_name, CPI_LENGTH_SYSTEM_NAME); EBC_TOUPPER(evb->system_name, CPI_LENGTH_SYSTEM_NAME); - /* set sytem level */ + /* set system level */ evb->system_level = LINUX_VERSION_CODE; /* set sysplex name */ diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 03b5102..9abba8b 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1526,7 +1526,7 @@ struct aac_mntent { __le32 capacityhigh; }; -#define FSCS_NOTCLEAN 0x0001 /* fsck is neccessary before mounting */ +#define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */ #define FSCS_READONLY 0x0002 /* possible result of broken mirror */ #define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */ diff --git a/drivers/scsi/aic7xxx/cam.h b/drivers/scsi/aic7xxx/cam.h index 26f17e3..687aef6 100644 --- a/drivers/scsi/aic7xxx/cam.h +++ b/drivers/scsi/aic7xxx/cam.h @@ -48,7 +48,7 @@ typedef enum { CAM_REQ_ABORTED, /* CCB request aborted by the host */ CAM_UA_ABORT, /* Unable to abort CCB request */ CAM_REQ_CMP_ERR, /* CCB request completed with an error */ - CAM_BUSY, /* CAM subsytem is busy */ + CAM_BUSY, /* CAM subsystem is busy */ CAM_REQ_INVALID, /* CCB request was invalid */ CAM_PATH_INVALID, /* Supplied Path ID is invalid */ CAM_SEL_TIMEOUT, /* Target Selection Timeout */ diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index fd42d47..a9def6e 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -1808,12 +1808,12 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id) irqreturn_t handled = IRQ_NONE; /* - * Check for pending interupt + * Check for pending interrupt */ scsi_status = DC395x_read16(acb, TRM_S1040_SCSI_STATUS); dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS); if (scsi_status & SCSIINTERRUPT) { - /* interupt pending - let's process it! */ + /* interrupt pending - let's process it! */ dc395x_handle_interrupt(acb, scsi_status); handled = IRQ_HANDLED; } @@ -4579,7 +4579,7 @@ static void adapter_uninit_chip(struct AdapterCtlBlk *acb) if (acb->config & HCC_SCSI_RESET) reset_scsi_bus(acb); - /* clear any pending interupt state */ + /* clear any pending interrupt state */ DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS); } diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index e4e4c6a..7877920 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -427,7 +427,7 @@ megaraid_exit(void) * @id : pci device id of the class of controllers * * This routine should be called whenever a new adapter is detected by the - * PCI hotplug susbsytem. + * PCI hotplug susbsystem. */ static int __devinit megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 1e29f51..d692c71 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1006,7 +1006,7 @@ int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a) * qla4xxx_start_firmware - starts qla4xxx firmware * @ha: Pointer to host adapter structure. * - * This routine performs the neccessary steps to start the firmware for + * This routine performs the necessary steps to start the firmware for * the QLA4010 adapter. **/ static int qla4xxx_start_firmware(struct scsi_qla_host *ha) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 69f542c..a69b155 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -676,7 +676,7 @@ static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo) * success as well). Returns a negated errno value in case of error. * * Note: most ioctls are forward onto the block subsystem or further - * down in the scsi subsytem. + * down in the scsi subsystem. **/ static int sd_ioctl(struct inode * inode, struct file * filp, unsigned int cmd, unsigned long arg) diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index e9aba93..7051e6c 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -181,7 +181,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, } - /* enable interupts and wait for wake up + /* enable interrupts and wait for wake up * if just one byte is expected the Rx FIFO genererates no * FFULL interrupt, so activate the RxRDY interrupt */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 0dcb416..735db4a 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -451,7 +451,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) /* Some boards (mostly VIA?) report bogus overcurrent indications, * causing massive log spam unless we completely ignore them. It - * may be relevant that VIA VT8235 controlers, where PORT_POWER is + * may be relevant that VIA VT8235 controllers, where PORT_POWER is * always set, seem to clear PORT_OCC and PORT_CSC when writing to * PORT_POWER; that's surprising, but maybe within-spec. */ diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 94d859a..ba370c5 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1556,7 +1556,7 @@ sl811h_start(struct usb_hcd *hcd) hcd->power_budget = sl811->board->power * 2; } - /* enable power and interupts */ + /* enable power and interrupts */ port_power(sl811, 1); return 0; |