diff options
author | Yulia Vilensky <vilensky@compulab.co.il> | 2010-04-26 11:05:25 (GMT) |
---|---|---|
committer | Anton Vorontsov <cbouatmailru@gmail.com> | 2010-04-26 18:03:42 (GMT) |
commit | 9b9ade6b612e562c4a5bd02ef38cc32e10f3f9ba (patch) | |
tree | 97b8e0130934a6bb08b1f4c083ed15a7db62abf1 /drivers | |
parent | 8ef1bb539203629f77a61976e4f25415e1083bff (diff) | |
download | linux-9b9ade6b612e562c4a5bd02ef38cc32e10f3f9ba.tar.xz |
ds2782_battery: Add support for ds2786 battery gas gauge
Signed-off-by: Yulia Vilensky <vilensky@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/power/Kconfig | 4 | ||||
-rw-r--r-- | drivers/power/ds2782_battery.c | 184 |
2 files changed, 138 insertions, 50 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 22f2fa9..c59bcb7 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -65,10 +65,10 @@ config BATTERY_DS2760 Say Y here to enable support for batteries with ds2760 chip. config BATTERY_DS2782 - tristate "DS2782 standalone gas-gauge" + tristate "DS2782/DS2786 standalone gas-gauge" depends on I2C help - Say Y here to enable support for the DS2782 standalone battery + Say Y here to enable support for the DS2782/DS2786 standalone battery gas-gauge. config BATTERY_PMU diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c index ba1bd1a..c665e80 100644 --- a/drivers/power/ds2782_battery.c +++ b/drivers/power/ds2782_battery.c @@ -5,6 +5,8 @@ * * Author: Ryan Mallon <ryan@bluewatersys.com> * + * DS2786 added by Yulia Vilensky <vilensky@compulab.co.il> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -20,12 +22,13 @@ #include <linux/idr.h> #include <linux/power_supply.h> #include <linux/slab.h> +#include <linux/ds2782_battery.h> #define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */ -#define DS2782_REG_VOLT_MSB 0x0c -#define DS2782_REG_TEMP_MSB 0x0a -#define DS2782_REG_CURRENT_MSB 0x0e +#define DS278x_REG_VOLT_MSB 0x0c +#define DS278x_REG_TEMP_MSB 0x0a +#define DS278x_REG_CURRENT_MSB 0x0e /* EEPROM Block */ #define DS2782_REG_RSNSP 0x69 /* Sense resistor value */ @@ -33,18 +36,33 @@ /* Current unit measurement in uA for a 1 milli-ohm sense resistor */ #define DS2782_CURRENT_UNITS 1563 -#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery) +#define DS2786_REG_RARC 0x02 /* Remaining active relative capacity */ + +#define DS2786_CURRENT_UNITS 25 + +struct ds278x_info; + +struct ds278x_battery_ops { + int (*get_current)(struct ds278x_info *info, int *current_uA); + int (*get_voltage)(struct ds278x_info *info, int *voltage_uA); + int (*get_capacity)(struct ds278x_info *info, int *capacity_uA); + +}; + +#define to_ds278x_info(x) container_of(x, struct ds278x_info, battery) -struct ds2782_info { +struct ds278x_info { struct i2c_client *client; struct power_supply battery; + struct ds278x_battery_ops *ops; int id; + int rsns; }; static DEFINE_IDR(battery_id); static DEFINE_MUTEX(battery_lock); -static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val) +static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val) { int ret; @@ -58,7 +76,7 @@ static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val) return 0; } -static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb, +static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb, s16 *val) { int ret; @@ -73,7 +91,7 @@ static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb, return 0; } -static int ds2782_get_temp(struct ds2782_info *info, int *temp) +static int ds278x_get_temp(struct ds278x_info *info, int *temp) { s16 raw; int err; @@ -84,14 +102,14 @@ static int ds2782_get_temp(struct ds2782_info *info, int *temp) * celsius. The temperature value is stored as a 10 bit number, plus * sign in the upper bits of a 16 bit register. */ - err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw); + err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw); if (err) return err; *temp = ((raw / 32) * 125) / 100; return 0; } -static int ds2782_get_current(struct ds2782_info *info, int *current_uA) +static int ds2782_get_current(struct ds278x_info *info, int *current_uA) { int sense_res; int err; @@ -102,7 +120,7 @@ static int ds2782_get_current(struct ds2782_info *info, int *current_uA) * The units of measurement for current are dependent on the value of * the sense resistor. */ - err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw); + err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw); if (err) return err; if (sense_res_raw == 0) { @@ -113,14 +131,14 @@ static int ds2782_get_current(struct ds2782_info *info, int *current_uA) dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n", sense_res); - err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw); + err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw); if (err) return err; *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res); return 0; } -static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA) +static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uA) { s16 raw; int err; @@ -129,36 +147,77 @@ static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA) * Voltage is measured in units of 4.88mV. The voltage is stored as * a 10-bit number plus sign, in the upper bits of a 16-bit register */ - err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw); + err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw); if (err) return err; *voltage_uA = (raw / 32) * 4800; return 0; } -static int ds2782_get_capacity(struct ds2782_info *info, int *capacity) +static int ds2782_get_capacity(struct ds278x_info *info, int *capacity) { int err; u8 raw; - err = ds2782_read_reg(info, DS2782_REG_RARC, &raw); + err = ds278x_read_reg(info, DS2782_REG_RARC, &raw); if (err) return err; *capacity = raw; return raw; } -static int ds2782_get_status(struct ds2782_info *info, int *status) +static int ds2786_get_current(struct ds278x_info *info, int *current_uA) +{ + int err; + s16 raw; + + err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw); + if (err) + return err; + *current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns); + return 0; +} + +static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uA) +{ + s16 raw; + int err; + + /* + * Voltage is measured in units of 1.22mV. The voltage is stored as + * a 10-bit number plus sign, in the upper bits of a 16-bit register + */ + err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw); + if (err) + return err; + *voltage_uA = (raw / 8) * 1220; + return 0; +} + +static int ds2786_get_capacity(struct ds278x_info *info, int *capacity) +{ + int err; + u8 raw; + + err = ds278x_read_reg(info, DS2786_REG_RARC, &raw); + if (err) + return err; + /* Relative capacity is displayed with resolution 0.5 % */ + *capacity = raw/2 ; + return 0; +} + +static int ds278x_get_status(struct ds278x_info *info, int *status) { int err; int current_uA; int capacity; - err = ds2782_get_current(info, ¤t_uA); + err = info->ops->get_current(info, ¤t_uA); if (err) return err; - err = ds2782_get_capacity(info, &capacity); + err = info->ops->get_capacity(info, &capacity); if (err) return err; @@ -174,32 +233,32 @@ static int ds2782_get_status(struct ds2782_info *info, int *status) return 0; } -static int ds2782_battery_get_property(struct power_supply *psy, +static int ds278x_battery_get_property(struct power_supply *psy, enum power_supply_property prop, union power_supply_propval *val) { - struct ds2782_info *info = to_ds2782_info(psy); + struct ds278x_info *info = to_ds278x_info(psy); int ret; switch (prop) { case POWER_SUPPLY_PROP_STATUS: - ret = ds2782_get_status(info, &val->intval); + ret = ds278x_get_status(info, &val->intval); break; case POWER_SUPPLY_PROP_CAPACITY: - ret = ds2782_get_capacity(info, &val->intval); + ret = info->ops->get_capacity(info, &val->intval); break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: - ret = ds2782_get_voltage(info, &val->intval); + ret = info->ops->get_voltage(info, &val->intval); break; case POWER_SUPPLY_PROP_CURRENT_NOW: - ret = ds2782_get_current(info, &val->intval); + ret = info->ops->get_current(info, &val->intval); break; case POWER_SUPPLY_PROP_TEMP: - ret = ds2782_get_temp(info, &val->intval); + ret = ds278x_get_temp(info, &val->intval); break; default: @@ -209,7 +268,7 @@ static int ds2782_battery_get_property(struct power_supply *psy, return ret; } -static enum power_supply_property ds2782_battery_props[] = { +static enum power_supply_property ds278x_battery_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_VOLTAGE_NOW, @@ -217,18 +276,18 @@ static enum power_supply_property ds2782_battery_props[] = { POWER_SUPPLY_PROP_TEMP, }; -static void ds2782_power_supply_init(struct power_supply *battery) +static void ds278x_power_supply_init(struct power_supply *battery) { battery->type = POWER_SUPPLY_TYPE_BATTERY; - battery->properties = ds2782_battery_props; - battery->num_properties = ARRAY_SIZE(ds2782_battery_props); - battery->get_property = ds2782_battery_get_property; + battery->properties = ds278x_battery_props; + battery->num_properties = ARRAY_SIZE(ds278x_battery_props); + battery->get_property = ds278x_battery_get_property; battery->external_power_changed = NULL; } -static int ds2782_battery_remove(struct i2c_client *client) +static int ds278x_battery_remove(struct i2c_client *client) { - struct ds2782_info *info = i2c_get_clientdata(client); + struct ds278x_info *info = i2c_get_clientdata(client); power_supply_unregister(&info->battery); kfree(info->battery.name); @@ -241,13 +300,36 @@ static int ds2782_battery_remove(struct i2c_client *client) return 0; } -static int ds2782_battery_probe(struct i2c_client *client, +static struct ds278x_battery_ops ds278x_ops[] = { + [0] = { + .get_current = ds2782_get_current, + .get_voltage = ds2782_get_voltage, + .get_capacity = ds2782_get_capacity, + }, + [1] = { + .get_current = ds2786_get_current, + .get_voltage = ds2786_get_voltage, + .get_capacity = ds2786_get_capacity, + } +}; + +static int ds278x_battery_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct ds2782_info *info; + struct ds278x_platform_data *pdata = client->dev.platform_data; + struct ds278x_info *info; int ret; int num; + /* + * ds2786 should have the sense resistor value set + * in the platform data + */ + if (id->driver_data == 1 && !pdata) { + dev_err(&client->dev, "missing platform data for ds2786\n"); + return -EINVAL; + } + /* Get an ID for this battery */ ret = idr_pre_get(&battery_id, GFP_KERNEL); if (ret == 0) { @@ -267,15 +349,20 @@ static int ds2782_battery_probe(struct i2c_client *client, goto fail_info; } - info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num); + info->battery.name = kasprintf(GFP_KERNEL, "%s-%d", client->name, num); if (!info->battery.name) { ret = -ENOMEM; goto fail_name; } + if (id->driver_data == 1) + info->rsns = pdata->rsns; + i2c_set_clientdata(client, info); info->client = client; - ds2782_power_supply_init(&info->battery); + info->id = num; + info->ops = &ds278x_ops[id->driver_data]; + ds278x_power_supply_init(&info->battery); ret = power_supply_register(&client->dev, &info->battery); if (ret) { @@ -297,31 +384,32 @@ fail_id: return ret; } -static const struct i2c_device_id ds2782_id[] = { +static const struct i2c_device_id ds278x_id[] = { {"ds2782", 0}, + {"ds2786", 1}, {}, }; -static struct i2c_driver ds2782_battery_driver = { +static struct i2c_driver ds278x_battery_driver = { .driver = { .name = "ds2782-battery", }, - .probe = ds2782_battery_probe, - .remove = ds2782_battery_remove, - .id_table = ds2782_id, + .probe = ds278x_battery_probe, + .remove = ds278x_battery_remove, + .id_table = ds278x_id, }; -static int __init ds2782_init(void) +static int __init ds278x_init(void) { - return i2c_add_driver(&ds2782_battery_driver); + return i2c_add_driver(&ds278x_battery_driver); } -module_init(ds2782_init); +module_init(ds278x_init); -static void __exit ds2782_exit(void) +static void __exit ds278x_exit(void) { - i2c_del_driver(&ds2782_battery_driver); + i2c_del_driver(&ds278x_battery_driver); } -module_exit(ds2782_exit); +module_exit(ds278x_exit); MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>"); MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); |