diff options
-rw-r--r-- | Documentation/devicetree/bindings/crypto/fsl-sec4.txt | 91 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/input/snvs-pwrkey.txt | 1 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/rtc/rtc-mxc.txt | 26 | ||||
-rw-r--r-- | arch/arm/Kconfig.debug | 9 | ||||
-rw-r--r-- | arch/arm/include/debug/imx-uart.h | 13 | ||||
-rw-r--r-- | arch/arm/mach-imx/Kconfig | 8 | ||||
-rw-r--r-- | arch/arm/mach-imx/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-imx/cpu.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-imx6ul.c | 86 | ||||
-rw-r--r-- | arch/arm/mach-imx/mxc.h | 6 | ||||
-rw-r--r-- | drivers/input/keyboard/Kconfig | 11 | ||||
-rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/keyboard/snvs_pwrkey.c | 227 | ||||
-rw-r--r-- | drivers/rtc/Kconfig | 1 | ||||
-rw-r--r-- | drivers/rtc/rtc-mxc.c | 60 | ||||
-rw-r--r-- | drivers/rtc/rtc-snvs.c | 132 | ||||
-rw-r--r-- | include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 8 |
17 files changed, 592 insertions, 92 deletions
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index e402277..f16bbd6 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -288,12 +288,13 @@ Secure Non-Volatile Storage (SNVS) Node Node defines address range and the associated interrupt for the SNVS function. This function monitors security state information & reports - security violations. + security violations. This also included rtc, + system power off and ON/OFF key. - compatible Usage: required Value type: <string> - Definition: Must include "fsl,sec-v4.0-mon". + Definition: Must include "fsl,sec-v4.0-mon" and "syscon". - reg Usage: required @@ -324,7 +325,7 @@ Secure Non-Volatile Storage (SNVS) Node the child address, parent address, & length. - interrupts - Usage: required + Usage: optional Value type: <prop_encoded-array> Definition: Specifies the interrupts generated by this device. The value of the interrupts property @@ -341,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node EXAMPLE sec_mon@314000 { - compatible = "fsl,sec-v4.0-mon"; + compatible = "fsl,sec-v4.0-mon", "syscon"; reg = <0x314000 0x1000>; ranges = <0 0x314000 0x1000>; interrupt-parent = <&mpic>; @@ -358,16 +359,72 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node Value type: <string> Definition: Must include "fsl,sec-v4.0-mon-rtc-lp". - - reg + - interrupts Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the physical - address and length of the SNVS LP configuration registers. + Value type: <prop_encoded-array> + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + + - regmap + Usage: required + Value type: <phandle> + Definition: this is phandle to the register map node. + + - offset + Usage: option + value type: <u32> + Definition: LP register offset. default it is 0x34. EXAMPLE - sec_mon_rtc_lp@314000 { + sec_mon_rtc_lp@1 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + interrupts = <93 2>; + regmap = <&snvs>; + offset = <0x34>; + }; + +===================================================================== +System ON/OFF key driver + + The snvs-pwrkey is designed to enable POWER key function which controlled + by SNVS ONOFF, the driver can report the status of POWER key and wakeup + system if pressed after system suspend. + + - compatible: + Usage: required + Value type: <string> + Definition: Mush include "fsl,sec-v4.0-pwrkey". + + - interrupts: + Usage: required + Value type: <prop_encoded-array> + Definition: The SNVS ON/OFF interrupt number to the CPU(s). + + - linux,keycode: + Usage: option + Value type: <int> + Definition: Keycode to emit, KEY_POWER by default. + + - wakeup-source: + Usage: option + Value type: <boo> + Definition: Button can wake-up the system. + + - regmap: + Usage: required: + Value type: <phandle> + Definition: this is phandle to the register map node. + +EXAMPLE: + snvs-pwrkey@0x020cc000 { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <0 4 0x4> + linux,keycode = <116>; /* KEY_POWER */ + wakeup; }; ===================================================================== @@ -443,12 +500,20 @@ FULL EXAMPLE compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; ranges = <0 0x314000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <93 2>; sec_mon_rtc_lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + regmap = <&sec_mon>; + offset = <0x34>; + interrupts = <93 2>; + }; + + snvs-pwrkey@0x020cc000 { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&sec_mon>; + interrupts = <0 4 0x4>; + linux,keycode = <116>; /* KEY_POWER */ + wakeup; }; }; diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt new file mode 100644 index 0000000..70c1425 --- /dev/null +++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt @@ -0,0 +1 @@ +See Documentation/devicetree/bindings/crypto/fsl-sec4.txt diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt new file mode 100644 index 0000000..5bcd31d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt @@ -0,0 +1,26 @@ +* Real Time Clock of the i.MX SoCs + +RTC controller for the i.MX SoCs + +Required properties: +- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc". +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: IRQ line for the RTC. +- clocks: should contain two entries: + * one for the input reference + * one for the the SoC RTC +- clock-names: should contain: + * "ref" for the input reference clock + * "ipg" for the SoC RTC clock + +Example: + +rtc@10007000 { + compatible = "fsl,imx21-rtc"; + reg = <0x10007000 0x1000>; + interrupts = <22>; + clocks = <&clks IMX27_CLK_CKIL>, + <&clks IMX27_CLK_RTC_IPG_GATE>; + clock-names = "ref", "ipg"; +}; diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 946c8c0..0cfd7f9 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -417,6 +417,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SX. + config DEBUG_IMX6UL_UART + bool "i.MX6UL Debug UART" + depends on SOC_IMX6UL + help + Say Y here if you want kernel low-level debugging support + on i.MX6UL. + config DEBUG_IMX7D_UART bool "i.MX7D Debug UART" depends on SOC_IMX7D @@ -1275,6 +1282,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART || \ + DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART default 1 depends on ARCH_MXC @@ -1326,6 +1334,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART || \ + DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_QCOM_UARTDM diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index 66f736f..bce58e9 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -90,6 +90,17 @@ #define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR #define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n) +#define IMX6UL_UART1_BASE_ADDR 0x02020000 +#define IMX6UL_UART2_BASE_ADDR 0x021e8000 +#define IMX6UL_UART3_BASE_ADDR 0x021ec000 +#define IMX6UL_UART4_BASE_ADDR 0x021f0000 +#define IMX6UL_UART5_BASE_ADDR 0x021f4000 +#define IMX6UL_UART6_BASE_ADDR 0x021fc000 +#define IMX6UL_UART7_BASE_ADDR 0x02018000 +#define IMX6UL_UART8_BASE_ADDR 0x02024000 +#define IMX6UL_UART_BASE_ADDR(n) IMX6UL_UART##n##_BASE_ADDR +#define IMX6UL_UART_BASE(n) IMX6UL_UART_BASE_ADDR(n) + #define IMX7D_UART1_BASE_ADDR 0x30860000 #define IMX7D_UART2_BASE_ADDR 0x30890000 #define IMX7D_UART3_BASE_ADDR 0x30880000 @@ -124,6 +135,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) #elif defined(CONFIG_DEBUG_IMX6SX_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) +#elif defined(CONFIG_DEBUG_IMX6UL_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6UL) #elif defined(CONFIG_DEBUG_IMX7D_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX7D) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 573536f..8ceda28 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -548,6 +548,14 @@ config SOC_IMX6SX help This enables support for Freescale i.MX6 SoloX processor. +config SOC_IMX6UL + bool "i.MX6 UltraLite support" + select PINCTRL_IMX6UL + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 UltraLite processor. + config SOC_IMX7D bool "i.MX7 Dual support" select PINCTRL_IMX7D diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 37c502a..fb689d8 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -83,6 +83,7 @@ endif obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o +obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o ifeq ($(CONFIG_SUSPEND),y) diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index a7fa92a..5b0f752 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -130,6 +130,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6Q: soc_id = "i.MX6Q"; break; + case MXC_CPU_IMX6UL: + soc_id = "i.MX6UL"; + break; case MXC_CPU_IMX7D: soc_id = "i.MX7D"; break; diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c new file mode 100644 index 0000000..db74da5 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/irqchip.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/micrel_phy.h> +#include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/regmap.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +static void __init imx6ul_enet_clk_init(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR, + IMX6UL_GPR1_ENET_CLK_OUTPUT); + else + pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); + +} + +static int ksz8081_phy_fixup(struct phy_device *dev) +{ + if (dev && dev->interface == PHY_INTERFACE_MODE_MII) { + phy_write(dev, 0x1f, 0x8110); + phy_write(dev, 0x16, 0x201); + } else if (dev && dev->interface == PHY_INTERFACE_MODE_RMII) { + phy_write(dev, 0x1f, 0x8190); + phy_write(dev, 0x16, 0x202); + } + + return 0; +} + +static void __init imx6ul_enet_phy_init(void) +{ + phy_register_fixup_for_uid(PHY_ID_KSZ8081, 0xffffffff, ksz8081_phy_fixup); +} + +static inline void imx6ul_enet_init(void) +{ + imx6ul_enet_clk_init(); + imx6ul_enet_phy_init(); +} + +static void __init imx6ul_init_machine(void) +{ + struct device *parent; + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + imx6ul_enet_init(); + imx_anatop_init(); +} + +static void __init imx6ul_init_irq(void) +{ + imx_init_revision_from_anatop(); + imx_src_init(); + irqchip_init(); +} + +static const char *imx6ul_dt_compat[] __initconst = { + "fsl,imx6ul", + NULL, +}; + +DT_MACHINE_START(IMX6UL, "Freescale i.MX6 Ultralite (Device Tree)") + .init_irq = imx6ul_init_irq, + .init_machine = imx6ul_init_machine, + .dt_compat = imx6ul_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index c4436d4..a5b1af6 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -38,6 +38,7 @@ #define MXC_CPU_IMX6DL 0x61 #define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 +#define MXC_CPU_IMX6UL 0x64 #define MXC_CPU_IMX7D 0x72 #define IMX_DDR_TYPE_LPDDR2 1 @@ -165,6 +166,11 @@ static inline bool cpu_is_imx6sx(void) return __mxc_cpu_type == MXC_CPU_IMX6SX; } +static inline bool cpu_is_imx6ul(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6UL; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 4cd94fd..82a8fb5 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -401,6 +401,17 @@ config KEYBOARD_MPR121 To compile this driver as a module, choose M here: the module will be called mpr121_touchkey. +config KEYBOARD_SNVS_PWRKEY + tristate "IMX SNVS Power Key Driver" + depends on SOC_IMX6SX + depends on OF + help + This is the snvs powerkey driver for the Freescale i.MX application + processors that are newer than i.MX6 SX. + + To compile this driver as a module, choose M here; the + module will be called snvs_pwrkey. + config KEYBOARD_IMX tristate "IMX keypad support" depends on ARCH_MXC diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index df28d55..1d416dd 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o +obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY) += snvs_pwrkey.o obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c new file mode 100644 index 0000000..78fd24c --- /dev/null +++ b/drivers/input/keyboard/snvs_pwrkey.c @@ -0,0 +1,227 @@ +/* + * Driver for the IMX SNVS ON/OFF Power Key + * Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +#define SNVS_LPSR_REG 0x4C /* LP Status Register */ +#define SNVS_LPCR_REG 0x38 /* LP Control Register */ +#define SNVS_HPSR_REG 0x14 +#define SNVS_HPSR_BTN BIT(6) +#define SNVS_LPSR_SPO BIT(18) +#define SNVS_LPCR_DEP_EN BIT(5) + +#define DEBOUNCE_TIME 30 +#define REPEAT_INTERVAL 60 + +struct pwrkey_drv_data { + struct regmap *snvs; + int irq; + int keycode; + int keystate; /* 1:pressed */ + int wakeup; + struct timer_list check_timer; + struct input_dev *input; +}; + +static void imx_imx_snvs_check_for_events(unsigned long data) +{ + struct pwrkey_drv_data *pdata = (struct pwrkey_drv_data *) data; + struct input_dev *input = pdata->input; + u32 state; + + regmap_read(pdata->snvs, SNVS_HPSR_REG, &state); + state = state & SNVS_HPSR_BTN ? 1 : 0; + + /* only report new event if status changed */ + if (state ^ pdata->keystate) { + pdata->keystate = state; + input_event(input, EV_KEY, pdata->keycode, state); + input_sync(input); + pm_relax(pdata->input->dev.parent); + } + + /* repeat check if pressed long */ + if (state) { + mod_timer(&pdata->check_timer, + jiffies + msecs_to_jiffies(REPEAT_INTERVAL)); + } +} + +static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev); + u32 lp_status; + + pm_wakeup_event(pdata->input->dev.parent, 0); + + regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status); + if (lp_status & SNVS_LPSR_SPO) + mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME)); + + /* clear SPO status */ + regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO); + + return IRQ_HANDLED; +} + +static void imx_snvs_pwrkey_act(void *pdata) +{ + struct pwrkey_drv_data *pd = pdata; + + del_timer_sync(&pd->check_timer); +} + +static int imx_snvs_pwrkey_probe(struct platform_device *pdev) +{ + struct pwrkey_drv_data *pdata = NULL; + struct input_dev *input = NULL; + struct device_node *np; + int error; + + /* Get SNVS register Page */ + np = pdev->dev.of_node; + if (!np) + return -ENODEV; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->snvs = syscon_regmap_lookup_by_phandle(np, "regmap");; + + if (!pdata->snvs) { + dev_err(&pdev->dev, "Can't get snvs syscon\n"); + return -ENODEV; + } + + if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) { + pdata->keycode = KEY_POWER; + dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n"); + } + + pdata->wakeup = of_property_read_bool(np, "wakeup-source"); + + pdata->irq = platform_get_irq(pdev, 0); + if (pdata->irq < 0) { + dev_err(&pdev->dev, "no irq defined in platform data\n"); + return -EINVAL; + } + + regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN); + + /* clear the unexpected interrupt before driver ready */ + regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO); + + setup_timer(&pdata->check_timer, + imx_imx_snvs_check_for_events, (unsigned long) pdata); + + input = devm_input_allocate_device(&pdev->dev); + if (!input) { + dev_err(&pdev->dev, "failed to allocate the input device\n"); + return -ENOMEM; + } + + input->name = pdev->name; + input->phys = "snvs-pwrkey/input0"; + input->id.bustype = BUS_HOST; + + input_set_capability(input, EV_KEY, pdata->keycode); + + /* input customer action to cancel release timer */ + error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata); + if (error) { + dev_err(&pdev->dev, "failed to register remove action\n"); + return error; + } + + error = devm_request_irq(&pdev->dev, pdata->irq, + imx_snvs_pwrkey_interrupt, + 0, pdev->name, pdev); + + if (error) { + dev_err(&pdev->dev, "interrupt not available.\n"); + return error; + } + + error = input_register_device(input); + if (error < 0) { + dev_err(&pdev->dev, "failed to register input device\n"); + input_free_device(input); + return error; + } + + pdata->input = input; + platform_set_drvdata(pdev, pdata); + + device_init_wakeup(&pdev->dev, pdata->wakeup); + + return 0; +} + +static int imx_snvs_pwrkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(pdata->irq); + + return 0; +} + +static int imx_snvs_pwrkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(pdata->irq); + + return 0; +} + +static const struct of_device_id imx_snvs_pwrkey_ids[] = { + { .compatible = "fsl,sec-v4.0-pwrkey" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids); + +static SIMPLE_DEV_PM_OPS(imx_snvs_pwrkey_pm_ops, imx_snvs_pwrkey_suspend, + imx_snvs_pwrkey_resume); + +static struct platform_driver imx_snvs_pwrkey_driver = { + .driver = { + .name = "snvs_pwrkey", + .pm = &imx_snvs_pwrkey_pm_ops, + .of_match_table = imx_snvs_pwrkey_ids, + }, + .probe = imx_snvs_pwrkey_probe, +}; +module_platform_driver(imx_snvs_pwrkey_driver); + +MODULE_AUTHOR("Freescale Semiconductor"); +MODULE_DESCRIPTION("i.MX snvs power key Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 83b4b89..533bfa3 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1523,6 +1523,7 @@ config RTC_DRV_MXC config RTC_DRV_SNVS tristate "Freescale SNVS RTC support" + select REGMAP_MMIO depends on HAS_IOMEM depends on OF help diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c index 5fc292c..7bd89d9 100644 --- a/drivers/rtc/rtc-mxc.c +++ b/drivers/rtc/rtc-mxc.c @@ -16,6 +16,8 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_device.h> #define RTC_INPUT_CLK_32768HZ (0x00 << 5) #define RTC_INPUT_CLK_32000HZ (0x01 << 5) @@ -79,7 +81,8 @@ struct rtc_plat_data { struct rtc_device *rtc; void __iomem *ioaddr; int irq; - struct clk *clk; + struct clk *clk_ref; + struct clk *clk_ipg; struct rtc_time g_rtc_alarm; enum imx_rtc_type devtype; }; @@ -97,6 +100,15 @@ static const struct platform_device_id imx_rtc_devtype[] = { }; MODULE_DEVICE_TABLE(platform, imx_rtc_devtype); +#ifdef CONFIG_OF +static const struct of_device_id imx_rtc_dt_ids[] = { + { .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC }, + { .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC }, + {} +}; +MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids); +#endif + static inline int is_imx1_rtc(struct rtc_plat_data *data) { return data->devtype == IMX1_RTC; @@ -361,29 +373,45 @@ static int mxc_rtc_probe(struct platform_device *pdev) u32 reg; unsigned long rate; int ret; + const struct of_device_id *of_id; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; - pdata->devtype = pdev->id_entry->driver_data; + of_id = of_match_device(imx_rtc_dt_ids, &pdev->dev); + if (of_id) + pdata->devtype = (enum imx_rtc_type)of_id->data; + else + pdata->devtype = pdev->id_entry->driver_data; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(pdata->ioaddr)) return PTR_ERR(pdata->ioaddr); - pdata->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(pdata->clk)) { - dev_err(&pdev->dev, "unable to get clock!\n"); - return PTR_ERR(pdata->clk); + pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(pdata->clk_ipg)) { + dev_err(&pdev->dev, "unable to get ipg clock!\n"); + return PTR_ERR(pdata->clk_ipg); } - ret = clk_prepare_enable(pdata->clk); + ret = clk_prepare_enable(pdata->clk_ipg); if (ret) return ret; - rate = clk_get_rate(pdata->clk); + pdata->clk_ref = devm_clk_get(&pdev->dev, "ref"); + if (IS_ERR(pdata->clk_ref)) { + dev_err(&pdev->dev, "unable to get ref clock!\n"); + ret = PTR_ERR(pdata->clk_ref); + goto exit_put_clk_ipg; + } + + ret = clk_prepare_enable(pdata->clk_ref); + if (ret) + goto exit_put_clk_ipg; + + rate = clk_get_rate(pdata->clk_ref); if (rate == 32768) reg = RTC_INPUT_CLK_32768HZ; @@ -394,7 +422,7 @@ static int mxc_rtc_probe(struct platform_device *pdev) else { dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate); ret = -EINVAL; - goto exit_put_clk; + goto exit_put_clk_ref; } reg |= RTC_ENABLE_BIT; @@ -402,7 +430,7 @@ static int mxc_rtc_probe(struct platform_device *pdev) if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) { dev_err(&pdev->dev, "hardware module can't be enabled!\n"); ret = -EIO; - goto exit_put_clk; + goto exit_put_clk_ref; } platform_set_drvdata(pdev, pdata); @@ -424,15 +452,17 @@ static int mxc_rtc_probe(struct platform_device *pdev) THIS_MODULE); if (IS_ERR(rtc)) { ret = PTR_ERR(rtc); - goto exit_put_clk; + goto exit_put_clk_ref; } pdata->rtc = rtc; return 0; -exit_put_clk: - clk_disable_unprepare(pdata->clk); +exit_put_clk_ref: + clk_disable_unprepare(pdata->clk_ref); +exit_put_clk_ipg: + clk_disable_unprepare(pdata->clk_ipg); return ret; } @@ -441,7 +471,8 @@ static int mxc_rtc_remove(struct platform_device *pdev) { struct rtc_plat_data *pdata = platform_get_drvdata(pdev); - clk_disable_unprepare(pdata->clk); + clk_disable_unprepare(pdata->clk_ref); + clk_disable_unprepare(pdata->clk_ipg); return 0; } @@ -473,6 +504,7 @@ static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume); static struct platform_driver mxc_rtc_driver = { .driver = { .name = "mxc_rtc", + .of_match_table = of_match_ptr(imx_rtc_dt_ids), .pm = &mxc_rtc_pm_ops, }, .id_table = imx_rtc_devtype, diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c index d87a85c..950c5d0 100644 --- a/drivers/rtc/rtc-snvs.c +++ b/drivers/rtc/rtc-snvs.c @@ -18,6 +18,10 @@ #include <linux/platform_device.h> #include <linux/rtc.h> #include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +#define SNVS_LPREGISTER_OFFSET 0x34 /* These register offsets are relative to LP (Low Power) range */ #define SNVS_LPCR 0x04 @@ -37,31 +41,36 @@ struct snvs_rtc_data { struct rtc_device *rtc; - void __iomem *ioaddr; + struct regmap *regmap; + int offset; int irq; - spinlock_t lock; struct clk *clk; }; -static u32 rtc_read_lp_counter(void __iomem *ioaddr) +static u32 rtc_read_lp_counter(struct snvs_rtc_data *data) { u64 read1, read2; + u32 val; do { - read1 = readl(ioaddr + SNVS_LPSRTCMR); + regmap_read(data->regmap, data->offset + SNVS_LPSRTCMR, &val); + read1 = val; read1 <<= 32; - read1 |= readl(ioaddr + SNVS_LPSRTCLR); + regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &val); + read1 |= val; - read2 = readl(ioaddr + SNVS_LPSRTCMR); + regmap_read(data->regmap, data->offset + SNVS_LPSRTCMR, &val); + read2 = val; read2 <<= 32; - read2 |= readl(ioaddr + SNVS_LPSRTCLR); + regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &val); + read2 |= val; } while (read1 != read2); /* Convert 47-bit counter to 32-bit raw second count */ return (u32) (read1 >> CNTR_TO_SECS_SH); } -static void rtc_write_sync_lp(void __iomem *ioaddr) +static void rtc_write_sync_lp(struct snvs_rtc_data *data) { u32 count1, count2, count3; int i; @@ -69,15 +78,15 @@ static void rtc_write_sync_lp(void __iomem *ioaddr) /* Wait for 3 CKIL cycles */ for (i = 0; i < 3; i++) { do { - count1 = readl(ioaddr + SNVS_LPSRTCLR); - count2 = readl(ioaddr + SNVS_LPSRTCLR); + regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1); + regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count2); } while (count1 != count2); /* Now wait until counter value changes */ do { do { - count2 = readl(ioaddr + SNVS_LPSRTCLR); - count3 = readl(ioaddr + SNVS_LPSRTCLR); + regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count2); + regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count3); } while (count2 != count3); } while (count3 == count1); } @@ -85,23 +94,14 @@ static void rtc_write_sync_lp(void __iomem *ioaddr) static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable) { - unsigned long flags; int timeout = 1000; u32 lpcr; - spin_lock_irqsave(&data->lock, flags); - - lpcr = readl(data->ioaddr + SNVS_LPCR); - if (enable) - lpcr |= SNVS_LPCR_SRTC_ENV; - else - lpcr &= ~SNVS_LPCR_SRTC_ENV; - writel(lpcr, data->ioaddr + SNVS_LPCR); - - spin_unlock_irqrestore(&data->lock, flags); + regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_SRTC_ENV, + enable ? SNVS_LPCR_SRTC_ENV : 0); while (--timeout) { - lpcr = readl(data->ioaddr + SNVS_LPCR); + regmap_read(data->regmap, data->offset + SNVS_LPCR, &lpcr); if (enable) { if (lpcr & SNVS_LPCR_SRTC_ENV) @@ -121,7 +121,7 @@ static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable) static int snvs_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct snvs_rtc_data *data = dev_get_drvdata(dev); - unsigned long time = rtc_read_lp_counter(data->ioaddr); + unsigned long time = rtc_read_lp_counter(data); rtc_time_to_tm(time, tm); @@ -139,8 +139,8 @@ static int snvs_rtc_set_time(struct device *dev, struct rtc_time *tm) snvs_rtc_enable(data, false); /* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */ - writel(time << CNTR_TO_SECS_SH, data->ioaddr + SNVS_LPSRTCLR); - writel(time >> (32 - CNTR_TO_SECS_SH), data->ioaddr + SNVS_LPSRTCMR); + regmap_write(data->regmap, data->offset + SNVS_LPSRTCLR, time << CNTR_TO_SECS_SH); + regmap_write(data->regmap, data->offset + SNVS_LPSRTCMR, time >> (32 - CNTR_TO_SECS_SH)); /* Enable RTC again */ snvs_rtc_enable(data, true); @@ -153,10 +153,10 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) struct snvs_rtc_data *data = dev_get_drvdata(dev); u32 lptar, lpsr; - lptar = readl(data->ioaddr + SNVS_LPTAR); + regmap_read(data->regmap, data->offset + SNVS_LPTAR, &lptar); rtc_time_to_tm(lptar, &alrm->time); - lpsr = readl(data->ioaddr + SNVS_LPSR); + regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr); alrm->pending = (lpsr & SNVS_LPSR_LPTA) ? 1 : 0; return 0; @@ -165,21 +165,12 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int snvs_rtc_alarm_irq_enable(struct device *dev, unsigned int enable) { struct snvs_rtc_data *data = dev_get_drvdata(dev); - u32 lpcr; - unsigned long flags; - - spin_lock_irqsave(&data->lock, flags); - lpcr = readl(data->ioaddr + SNVS_LPCR); - if (enable) - lpcr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN); - else - lpcr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN); - writel(lpcr, data->ioaddr + SNVS_LPCR); + regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, + (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN), + enable ? (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN) : 0); - spin_unlock_irqrestore(&data->lock, flags); - - rtc_write_sync_lp(data->ioaddr); + rtc_write_sync_lp(data); return 0; } @@ -189,24 +180,14 @@ static int snvs_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) struct snvs_rtc_data *data = dev_get_drvdata(dev); struct rtc_time *alrm_tm = &alrm->time; unsigned long time; - unsigned long flags; - u32 lpcr; rtc_tm_to_time(alrm_tm, &time); - spin_lock_irqsave(&data->lock, flags); - - /* Have to clear LPTA_EN before programming new alarm time in LPTAR */ - lpcr = readl(data->ioaddr + SNVS_LPCR); - lpcr &= ~SNVS_LPCR_LPTA_EN; - writel(lpcr, data->ioaddr + SNVS_LPCR); - - spin_unlock_irqrestore(&data->lock, flags); - - writel(time, data->ioaddr + SNVS_LPTAR); + regmap_update_bits(data->regmap, data->offset + SNVS_LPCR, SNVS_LPCR_LPTA_EN, 0); + regmap_write(data->regmap, data->offset + SNVS_LPTAR, time); /* Clear alarm interrupt status bit */ - writel(SNVS_LPSR_LPTA, data->ioaddr + SNVS_LPSR); + regmap_write(data->regmap, data->offset + SNVS_LPSR, SNVS_LPSR_LPTA); return snvs_rtc_alarm_irq_enable(dev, alrm->enabled); } @@ -226,7 +207,7 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id) u32 lpsr; u32 events = 0; - lpsr = readl(data->ioaddr + SNVS_LPSR); + regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr); if (lpsr & SNVS_LPSR_LPTA) { events |= (RTC_AF | RTC_IRQF); @@ -238,25 +219,48 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id) } /* clear interrupt status */ - writel(lpsr, data->ioaddr + SNVS_LPSR); + regmap_write(data->regmap, data->offset + SNVS_LPSR, lpsr); return events ? IRQ_HANDLED : IRQ_NONE; } +static const struct regmap_config snvs_rtc_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + static int snvs_rtc_probe(struct platform_device *pdev) { struct snvs_rtc_data *data; struct resource *res; int ret; + void __iomem *mmio; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data->ioaddr = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(data->ioaddr)) - return PTR_ERR(data->ioaddr); + data->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap"); + + if (IS_ERR(data->regmap)) { + dev_warn(&pdev->dev, "snvs rtc: you use old dts file, please update it\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + mmio = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mmio)) + return PTR_ERR(mmio); + + data->regmap = devm_regmap_init_mmio(&pdev->dev, mmio, &snvs_rtc_config); + } else { + data->offset = SNVS_LPREGISTER_OFFSET; + of_property_read_u32(pdev->dev.of_node, "offset", &data->offset); + } + + if (!data->regmap) { + dev_err(&pdev->dev, "Can't find snvs syscon\n"); + return -ENODEV; + } data->irq = platform_get_irq(pdev, 0); if (data->irq < 0) @@ -276,13 +280,11 @@ static int snvs_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); - spin_lock_init(&data->lock); - /* Initialize glitch detect */ - writel(SNVS_LPPGDR_INIT, data->ioaddr + SNVS_LPPGDR); + regmap_write(data->regmap, data->offset + SNVS_LPPGDR, SNVS_LPPGDR_INIT); /* Clear interrupt status */ - writel(0xffffffff, data->ioaddr + SNVS_LPSR); + regmap_write(data->regmap, data->offset + SNVS_LPSR, 0xffffffff); /* Enable RTC */ snvs_rtc_enable(data, true); diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index d16f4c8..558a485 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -435,4 +435,12 @@ #define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS (0x1 << 1) #define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1) +/* For imx6ul iomux gpr register field define */ +#define IMX6UL_GPR1_ENET1_CLK_DIR (0x1 << 17) +#define IMX6UL_GPR1_ENET2_CLK_DIR (0x1 << 18) +#define IMX6UL_GPR1_ENET1_CLK_OUTPUT (0x1 << 17) +#define IMX6UL_GPR1_ENET2_CLK_OUTPUT (0x1 << 18) +#define IMX6UL_GPR1_ENET_CLK_DIR (0x3 << 17) +#define IMX6UL_GPR1_ENET_CLK_OUTPUT (0x3 << 17) + #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ |