diff options
-rw-r--r-- | Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt | 58 | ||||
-rw-r--r-- | drivers/net/phy/mscc.c | 125 | ||||
-rw-r--r-- | include/dt-bindings/net/mscc-phy-vsc8531.h | 21 |
3 files changed, 204 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt new file mode 100644 index 0000000..99c7eb0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt @@ -0,0 +1,58 @@ +* Microsemi - vsc8531 Giga bit ethernet phy + +Required properties: +- compatible : Should contain phy id as "ethernet-phy-idAAAA.BBBB" + The PHY device uses the binding described in + Documentation/devicetree/bindings/net/phy.txt + +Optional properties: +- vsc8531,vddmac : The vddmac in mV. +- vsc8531,edge-slowdown : % the edge should be slowed down relative to + the fastest possible edge time. Native sign + need not enter. + Edge rate sets the drive strength of the MAC + interface output signals. Changing the drive + strength will affect the edge rate of the output + signal. The goal of this setting is to help + reduce electrical emission (EMI) by being able + to reprogram drive strength and in effect slow + down the edge rate if desired. Table 1 shows the + impact to the edge rate per VDDMAC supply for each + drive strength setting. + Ref: Table:1 - Edge rate change below. + +Note: see dt-bindings/net/mscc-phy-vsc8531.h for applicable values + +Table: 1 - Edge rate change +----------------------------------------------------------------| +| Edge Rate Change (VDDMAC) | +| | +| 3300 mV 2500 mV 1800 mV 1500 mV | +|---------------------------------------------------------------| +| Default Deafult Default Default | +| (Fastest) (recommended) (recommended) | +|---------------------------------------------------------------| +| -2% -3% -5% -6% | +|---------------------------------------------------------------| +| -4% -6% -9% -14% | +|---------------------------------------------------------------| +| -7% -10% -16% -21% | +|(recommended) (recommended) | +|---------------------------------------------------------------| +| -10% -14% -23% -29% | +|---------------------------------------------------------------| +| -17% -23% -35% -42% | +|---------------------------------------------------------------| +| -29% -37% -52% -58% | +|---------------------------------------------------------------| +| -53% -63% -76% -77% | +| (slowest) | +|---------------------------------------------------------------| + +Example: + + vsc8531_0: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.0570"; + vsc8531,vddmac = <3300>; + vsc8531,edge-slowdown = <21>; + }; diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index d350deb..a17573e 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -11,6 +11,8 @@ #include <linux/mdio.h> #include <linux/mii.h> #include <linux/phy.h> +#include <linux/of.h> +#include <dt-bindings/net/mscc-phy-vsc8531.h> enum rgmii_rx_clock_delay { RGMII_RX_CLK_DELAY_0_2_NS = 0, @@ -37,6 +39,10 @@ enum rgmii_rx_clock_delay { #define MII_VSC85XX_INT_MASK_MASK 0xa000 #define MII_VSC85XX_INT_STATUS 26 +#define MSCC_PHY_WOL_MAC_CONTROL 27 +#define EDGE_RATE_CNTL_POS 5 +#define EDGE_RATE_CNTL_MASK 0x00E0 + #define MSCC_EXT_PAGE_ACCESS 31 #define MSCC_PHY_PAGE_STANDARD 0x0000 /* Standard registers */ #define MSCC_PHY_PAGE_EXTENDED_2 0x0002 /* Extended reg - page 2 */ @@ -50,6 +56,23 @@ enum rgmii_rx_clock_delay { #define PHY_ID_VSC8531 0x00070570 #define PHY_ID_VSC8541 0x00070770 +struct edge_rate_table { + u16 vddmac; + int slowdown[MSCC_SLOWDOWN_MAX]; +}; + +struct edge_rate_table edge_table[MSCC_VDDMAC_MAX] = { + {3300, { 0, -2, -4, -7, -10, -17, -29, -53} }, + {2500, { 0, -3, -6, -10, -14, -23, -37, -63} }, + {1800, { 0, -5, -9, -16, -23, -35, -52, -76} }, + {1500, { 0, -6, -14, -21, -29, -42, -58, -77} }, +}; + +struct vsc8531_private { + u8 edge_slowdown; + u16 vddmac; +}; + static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page) { int rc; @@ -58,6 +81,51 @@ static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page) return rc; } +static u8 edge_rate_magic_get(u16 vddmac, + int slowdown) +{ + int rc = (MSCC_SLOWDOWN_MAX - 1); + u8 vdd; + u8 sd; + + for (vdd = 0; vdd < MSCC_VDDMAC_MAX; vdd++) { + if (edge_table[vdd].vddmac == vddmac) { + for (sd = 0; sd < MSCC_SLOWDOWN_MAX; sd++) { + if (edge_table[vdd].slowdown[sd] <= slowdown) { + rc = (MSCC_SLOWDOWN_MAX - sd - 1); + break; + } + } + } + } + + return rc; +} + +static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev, + u8 edge_rate) +{ + int rc; + u16 reg_val; + + mutex_lock(&phydev->lock); + rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2); + if (rc != 0) + goto out_unlock; + reg_val = phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL); + reg_val &= ~(EDGE_RATE_CNTL_MASK); + reg_val |= (edge_rate << EDGE_RATE_CNTL_POS); + rc = phy_write(phydev, MSCC_PHY_WOL_MAC_CONTROL, reg_val); + if (rc != 0) + goto out_unlock; + rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD); + +out_unlock: + mutex_unlock(&phydev->lock); + + return rc; +} + static int vsc85xx_mac_if_set(struct phy_device *phydev, phy_interface_t interface) { @@ -116,9 +184,45 @@ out_unlock: return rc; } +#ifdef CONFIG_OF_MDIO +static int vsc8531_of_init(struct phy_device *phydev) +{ + int rc; + struct vsc8531_private *vsc8531 = phydev->priv; + struct device *dev = &phydev->mdio.dev; + struct device_node *of_node = dev->of_node; + + if (!of_node) + return -ENODEV; + + rc = of_property_read_u16(of_node, "vsc8531,vddmac", + &vsc8531->vddmac); + if (rc == -EINVAL) + vsc8531->vddmac = MSCC_VDDMAC_3300; + rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown", + &vsc8531->edge_slowdown); + if (rc == -EINVAL) + vsc8531->edge_slowdown = 0; + + rc = 0; + return rc; +} +#else +static int vsc8531_of_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ + static int vsc85xx_config_init(struct phy_device *phydev) { int rc; + struct vsc8531_private *vsc8531 = phydev->priv; + u8 edge_rate; + + rc = vsc8531_of_init(phydev); + if (rc) + return rc; rc = vsc85xx_default_config(phydev); if (rc) @@ -128,6 +232,12 @@ static int vsc85xx_config_init(struct phy_device *phydev) if (rc) return rc; + edge_rate = edge_rate_magic_get(vsc8531->vddmac, + -(int)vsc8531->edge_slowdown); + rc = vsc85xx_edge_rate_cntl_set(phydev, edge_rate); + if (rc) + return rc; + rc = genphy_config_init(phydev); return rc; @@ -160,6 +270,19 @@ static int vsc85xx_config_intr(struct phy_device *phydev) return rc; } +static int vsc85xx_probe(struct phy_device *phydev) +{ + struct vsc8531_private *vsc8531; + + vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL); + if (!vsc8531) + return -ENOMEM; + + phydev->priv = vsc8531; + + return 0; +} + /* Microsemi VSC85xx PHYs */ static struct phy_driver vsc85xx_driver[] = { { @@ -177,6 +300,7 @@ static struct phy_driver vsc85xx_driver[] = { .config_intr = &vsc85xx_config_intr, .suspend = &genphy_suspend, .resume = &genphy_resume, + .probe = &vsc85xx_probe, }, { .phy_id = PHY_ID_VSC8541, @@ -193,6 +317,7 @@ static struct phy_driver vsc85xx_driver[] = { .config_intr = &vsc85xx_config_intr, .suspend = &genphy_suspend, .resume = &genphy_resume, + .probe = &vsc85xx_probe, } }; diff --git a/include/dt-bindings/net/mscc-phy-vsc8531.h b/include/dt-bindings/net/mscc-phy-vsc8531.h new file mode 100644 index 0000000..2383dd2 --- /dev/null +++ b/include/dt-bindings/net/mscc-phy-vsc8531.h @@ -0,0 +1,21 @@ +/* + * Device Tree constants for Microsemi VSC8531 PHY + * + * Author: Nagaraju Lakkaraju + * + * License: Dual MIT/GPL + * Copyright (c) 2016 Microsemi Corporation + */ + +#ifndef _DT_BINDINGS_MSCC_VSC8531_H +#define _DT_BINDINGS_MSCC_VSC8531_H + +/* MAC interface Edge rate control VDDMAC in milli Volts */ +#define MSCC_VDDMAC_3300 3300 +#define MSCC_VDDMAC_2500 2500 +#define MSCC_VDDMAC_1800 1800 +#define MSCC_VDDMAC_1500 1500 +#define MSCC_VDDMAC_MAX 4 +#define MSCC_SLOWDOWN_MAX 8 + +#endif |