diff options
-rw-r--r-- | drivers/infiniband/hw/hfi1/eprom.c | 103 | ||||
-rw-r--r-- | drivers/infiniband/hw/hfi1/eprom.h | 2 | ||||
-rw-r--r-- | drivers/infiniband/hw/hfi1/file_ops.c | 1 |
3 files changed, 103 insertions, 3 deletions
diff --git a/drivers/infiniband/hw/hfi1/eprom.c b/drivers/infiniband/hw/hfi1/eprom.c index 36b7794..30ecd94 100644 --- a/drivers/infiniband/hw/hfi1/eprom.c +++ b/drivers/infiniband/hw/hfi1/eprom.c @@ -49,7 +49,26 @@ #include "common.h" #include "eprom.h" +/* + * The EPROM is logically divided into three partitions: + * partition 0: the first 128K, visible from PCI ROM BAR + * partition 1: 4K config file (sector size) + * partition 2: the rest + */ +#define P0_SIZE (128 * 1024) +#define P1_SIZE (4 * 1024) +#define P1_START P0_SIZE +#define P2_START (P0_SIZE + P1_SIZE) + +/* controller page size, in bytes */ +#define EP_PAGE_SIZE 256 +#define EP_PAGE_MASK (EP_PAGE_SIZE - 1) +#define EP_PAGE_DWORDS (EP_PAGE_SIZE / sizeof(u32)) + +/* controller commands */ #define CMD_SHIFT 24 +#define CMD_NOP (0) +#define CMD_READ_DATA(addr) ((0x03 << CMD_SHIFT) | addr) #define CMD_RELEASE_POWERDOWN_NOID ((0xab << CMD_SHIFT)) /* controller interface speeds */ @@ -61,6 +80,90 @@ * Double it for safety. */ #define EPROM_TIMEOUT 80000 /* ms */ + +/* + * Read a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset)); + for (i = 0; i < EP_PAGE_DWORDS; i++) + result[i] = (u32)read_csr(dd, ASIC_EEP_DATA); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */ +} + +/* + * Read length bytes starting at offset from the start of the EPROM. + */ +static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, void *dest) +{ + u32 buffer[EP_PAGE_DWORDS]; + u32 end; + u32 start_offset; + u32 read_start; + u32 bytes; + + if (len == 0) + return 0; + + end = start + len; + + /* + * Make sure the read range is not outside of the controller read + * command address range. Note that '>' is correct below - the end + * of the range is OK if it stops at the limit, but no higher. + */ + if (end > (1 << CMD_SHIFT)) + return -EINVAL; + + /* read the first partial page */ + start_offset = start & EP_PAGE_MASK; + if (start_offset) { + /* partial starting page */ + + /* align and read the page that contains the start */ + read_start = start & ~EP_PAGE_MASK; + read_page(dd, read_start, buffer); + + /* the rest of the page is available data */ + bytes = EP_PAGE_SIZE - start_offset; + + if (len <= bytes) { + /* end is within this page */ + memcpy(dest, (u8 *)buffer + start_offset, len); + return 0; + } + + memcpy(dest, (u8 *)buffer + start_offset, bytes); + + start += bytes; + len -= bytes; + dest += bytes; + } + /* start is now page aligned */ + + /* read whole pages */ + while (len >= EP_PAGE_SIZE) { + read_page(dd, start, buffer); + memcpy(dest, buffer, EP_PAGE_SIZE); + + start += EP_PAGE_SIZE; + len -= EP_PAGE_SIZE; + dest += EP_PAGE_SIZE; + } + + /* read the last partial page */ + if (len) { + read_page(dd, start, buffer); + memcpy(dest, buffer, len); + } + + return 0; +} + /* * Initialize the EPROM handler. */ diff --git a/drivers/infiniband/hw/hfi1/eprom.h b/drivers/infiniband/hw/hfi1/eprom.h index d41f0b1..b7ac9ce 100644 --- a/drivers/infiniband/hw/hfi1/eprom.h +++ b/drivers/infiniband/hw/hfi1/eprom.h @@ -45,8 +45,6 @@ * */ -struct hfi1_cmd; struct hfi1_devdata; int eprom_init(struct hfi1_devdata *dd); -int handle_eprom_command(struct file *fp, const struct hfi1_cmd *cmd); diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c index 13bb6a5..677efa0 100644 --- a/drivers/infiniband/hw/hfi1/file_ops.c +++ b/drivers/infiniband/hw/hfi1/file_ops.c @@ -58,7 +58,6 @@ #include "trace.h" #include "user_sdma.h" #include "user_exp_rcv.h" -#include "eprom.h" #include "aspm.h" #include "mmu_rb.h" |