diff options
Diffstat (limited to 'arch/arm/include/debug')
-rw-r--r-- | arch/arm/include/debug/digicolor.S | 35 | ||||
-rw-r--r-- | arch/arm/include/debug/msm.S | 6 | ||||
-rw-r--r-- | arch/arm/include/debug/sirf.S | 30 |
3 files changed, 54 insertions, 17 deletions
diff --git a/arch/arm/include/debug/digicolor.S b/arch/arm/include/debug/digicolor.S new file mode 100644 index 0000000..c951715 --- /dev/null +++ b/arch/arm/include/debug/digicolor.S @@ -0,0 +1,35 @@ +/* + * Debugging macro include header for Conexant Digicolor USART + * + * Copyright (C) 2014 Paradox Innovation Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#define UA0_STATUS 0x0742 +#define UA0_EMI_REC 0x0744 + +#define UA0_STATUS_TX_READY 0x40 + +#ifdef CONFIG_DEBUG_UART_PHYS + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm +#endif + + .macro senduart,rd,rx + strb \rd, [\rx, #UA0_EMI_REC] + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1001: ldrb \rd, [\rx, #UA0_STATUS] + tst \rd, #UA0_STATUS_TX_READY + beq 1001b + .endm diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index 9ef5761..e55a942 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -23,6 +23,7 @@ .endm .macro senduart, rd, rx +ARM_BE8(rev \rd, \rd ) #ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] @@ -35,24 +36,29 @@ #ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] +ARM_BE8(rev \rd, \rd ) tst \rd, #0x08 bne 1002f @ wait for TXREADY in UARTDM_ISR 1001: ldr \rd, [\rx, #0x14] +ARM_BE8(rev \rd, \rd ) tst \rd, #0x80 beq 1001b 1002: @ Clear TX_READY by writing to the UARTDM_CR register mov \rd, #0x300 +ARM_BE8(rev \rd, \rd ) str \rd, [\rx, #0x10] @ Write 0x1 to NCF register mov \rd, #0x1 +ARM_BE8(rev \rd, \rd ) str \rd, [\rx, #0x40] @ UARTDM reg. Read to induce delay ldr \rd, [\rx, #0x08] #else @ wait for TX_READY 1001: ldr \rd, [\rx, #0x08] +ARM_BE8(rev \rd, \rd ) tst \rd, #0x04 beq 1001b #endif diff --git a/arch/arm/include/debug/sirf.S b/arch/arm/include/debug/sirf.S index dbf250c..630f231 100644 --- a/arch/arm/include/debug/sirf.S +++ b/arch/arm/include/debug/sirf.S @@ -6,37 +6,33 @@ * Licensed under GPLv2 or later. */ -#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1) -#define SIRFSOC_UART1_PA_BASE 0xb0060000 -#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1) -#define SIRFSOC_UART1_PA_BASE 0xcc060000 -#else -#define SIRFSOC_UART1_PA_BASE 0 -#endif +#define SIRF_LLUART_TXFIFO_STATUS 0x0114 +#define SIRF_LLUART_TXFIFO_DATA 0x0118 -#define SIRFSOC_UART1_VA_BASE 0xFEC60000 +#define SIRF_LLUART_TXFIFO_FULL (1 << 5) -#define SIRFSOC_UART_TXFIFO_STATUS 0x0114 -#define SIRFSOC_UART_TXFIFO_DATA 0x0118 +#ifdef CONFIG_DEBUG_SIRFATLAS7_UART0 +#define SIRF_LLUART_TXFIFO_EMPTY (1 << 8) +#else +#define SIRF_LLUART_TXFIFO_EMPTY (1 << 6) +#endif -#define SIRFSOC_UART1_TXFIFO_FULL (1 << 5) -#define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6) .macro addruart, rp, rv, tmp - ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical - ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual + ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical + ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virtual .endm .macro senduart,rd,rx - str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA] + str \rd, [\rx, #SIRF_LLUART_TXFIFO_DATA] .endm .macro busyuart,rd,rx .endm .macro waituart,rd,rx -1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS] - tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY +1001: ldr \rd, [\rx, #SIRF_LLUART_TXFIFO_STATUS] + tst \rd, #SIRF_LLUART_TXFIFO_EMPTY beq 1001b .endm |