diff options
Diffstat (limited to 'drivers/base/power/opp.c')
-rw-r--r-- | drivers/base/power/opp.c | 257 |
1 files changed, 233 insertions, 24 deletions
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 0d8dbf2..0e0eff4 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -51,10 +51,15 @@ * order. * @dynamic: not-created from static DT entries. * @available: true/false - marks if this OPP as available or not + * @turbo: true if turbo (boost) OPP * @rate: Frequency in hertz - * @u_volt: Nominal voltage in microvolts corresponding to this OPP + * @u_volt: Target voltage in microvolts corresponding to this OPP + * @u_volt_min: Minimum voltage in microvolts corresponding to this OPP + * @u_volt_max: Maximum voltage in microvolts corresponding to this OPP + * @u_amp: Maximum current drawn by the device in microamperes * @dev_opp: points back to the device_opp struct this opp belongs to * @rcu_head: RCU callback head used for deferred freeing + * @np: OPP's device node. * * This structure stores the OPP information for a given device. */ @@ -63,11 +68,18 @@ struct dev_pm_opp { bool available; bool dynamic; + bool turbo; unsigned long rate; + unsigned long u_volt; + unsigned long u_volt_min; + unsigned long u_volt_max; + unsigned long u_amp; struct device_opp *dev_opp; struct rcu_head rcu_head; + + struct device_node *np; }; /** @@ -679,6 +691,125 @@ unlock: return ret; } +/* TODO: Support multiple regulators */ +static int opp_get_microvolt(struct dev_pm_opp *opp, struct device *dev) +{ + u32 microvolt[3] = {0}; + int count, ret; + + count = of_property_count_u32_elems(opp->np, "opp-microvolt"); + if (!count) + return 0; + + /* There can be one or three elements here */ + if (count != 1 && count != 3) { + dev_err(dev, "%s: Invalid number of elements in opp-microvolt property (%d)\n", + __func__, count); + return -EINVAL; + } + + ret = of_property_read_u32_array(opp->np, "opp-microvolt", microvolt, + count); + if (ret) { + dev_err(dev, "%s: error parsing opp-microvolt: %d\n", __func__, + ret); + return -EINVAL; + } + + opp->u_volt = microvolt[0]; + opp->u_volt_min = microvolt[1]; + opp->u_volt_max = microvolt[2]; + + return 0; +} + +/** + * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings) + * @dev: device for which we do this operation + * @np: device node + * + * This function adds an opp definition to the opp list and returns status. The + * opp can be controlled using dev_pm_opp_enable/disable functions and may be + * removed by dev_pm_opp_remove. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + * -EINVAL Failed parsing the OPP node + */ +static int _opp_add_static_v2(struct device *dev, struct device_node *np) +{ + struct device_opp *dev_opp; + struct dev_pm_opp *new_opp; + u64 rate; + int ret; + + /* Hold our list modification lock here */ + mutex_lock(&dev_opp_list_lock); + + new_opp = _allocate_opp(dev, &dev_opp); + if (!new_opp) { + ret = -ENOMEM; + goto unlock; + } + + ret = of_property_read_u64(np, "opp-hz", &rate); + if (ret < 0) { + dev_err(dev, "%s: opp-hz not found\n", __func__); + goto free_opp; + } + + /* + * Rate is defined as an unsigned long in clk API, and so casting + * explicitly to its type. Must be fixed once rate is 64 bit + * guaranteed in clk API. + */ + new_opp->rate = (unsigned long)rate; + new_opp->turbo = of_property_read_bool(np, "turbo-mode"); + + new_opp->np = np; + new_opp->dynamic = false; + new_opp->available = true; + + ret = opp_get_microvolt(new_opp, dev); + if (ret) + goto free_opp; + + of_property_read_u32(np, "opp-microamp", (u32 *)&new_opp->u_amp); + + ret = _opp_add(new_opp, dev_opp); + if (ret) + goto free_opp; + + mutex_unlock(&dev_opp_list_lock); + + pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu\n", + __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt, + new_opp->u_volt_min, new_opp->u_volt_max); + + /* + * Notify the changes in the availability of the operable + * frequency/voltage list. + */ + srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADD, new_opp); + return 0; + +free_opp: + _opp_remove(dev_opp, new_opp, false); +unlock: + mutex_unlock(&dev_opp_list_lock); + return ret; +} + /** * dev_pm_opp_add() - Add an OPP table from a table definitions * @dev: device for which we do this operation @@ -910,29 +1041,64 @@ void of_free_opp_table(struct device *dev) } EXPORT_SYMBOL_GPL(of_free_opp_table); -/** - * of_init_opp_table() - Initialize opp table from device tree - * @dev: device pointer used to lookup device OPPs. - * - * Register the initial OPP table with the OPP library for given device. - * - * Locking: The internal device_opp and opp structures are RCU protected. - * Hence this function indirectly uses RCU updater strategy with mutex locks - * to keep the integrity of the internal data structures. Callers should ensure - * that this function is *NOT* called under RCU protection or in contexts where - * mutex cannot be locked. - * - * Return: - * 0 On success OR - * Duplicate OPPs (both freq and volt are same) and opp->available - * -EEXIST Freq are same and volt are different OR - * Duplicate OPPs (both freq and volt are same) and !opp->available - * -ENOMEM Memory allocation failure - * -ENODEV when 'operating-points' property is not found or is invalid data - * in device node. - * -ENODATA when empty 'operating-points' property is found - */ -int of_init_opp_table(struct device *dev) +/* Returns opp descriptor node from its phandle. Caller must do of_node_put() */ +static struct device_node * +_of_get_opp_desc_node_from_prop(struct device *dev, const struct property *prop) +{ + struct device_node *opp_np; + + opp_np = of_find_node_by_phandle(be32_to_cpup(prop->value)); + if (!opp_np) { + dev_err(dev, "%s: Prop: %s contains invalid opp desc phandle\n", + __func__, prop->name); + return ERR_PTR(-EINVAL); + } + + return opp_np; +} + +/* Initializes OPP tables based on new bindings */ +static int _of_init_opp_table_v2(struct device *dev, + const struct property *prop) +{ + struct device_node *opp_np, *np; + int ret = 0, count = 0; + + if (!prop->value) + return -ENODATA; + + /* Get opp node */ + opp_np = _of_get_opp_desc_node_from_prop(dev, prop); + if (IS_ERR(opp_np)) + return PTR_ERR(opp_np); + + /* We have opp-list node now, iterate over it and add OPPs */ + for_each_available_child_of_node(opp_np, np) { + count++; + + ret = _opp_add_static_v2(dev, np); + if (ret) { + dev_err(dev, "%s: Failed to add OPP, %d\n", __func__, + ret); + break; + } + } + + /* There should be one of more OPP defined */ + if (WARN_ON(!count)) + goto put_opp_np; + + if (ret) + of_free_opp_table(dev); + +put_opp_np: + of_node_put(opp_np); + + return ret; +} + +/* Initializes OPP tables based on old-deprecated bindings */ +static int _of_init_opp_table_v1(struct device *dev) { const struct property *prop; const __be32 *val; @@ -967,5 +1133,48 @@ int of_init_opp_table(struct device *dev) return 0; } + +/** + * of_init_opp_table() - Initialize opp table from device tree + * @dev: device pointer used to lookup device OPPs. + * + * Register the initial OPP table with the OPP library for given device. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function indirectly uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + * + * Return: + * 0 On success OR + * Duplicate OPPs (both freq and volt are same) and opp->available + * -EEXIST Freq are same and volt are different OR + * Duplicate OPPs (both freq and volt are same) and !opp->available + * -ENOMEM Memory allocation failure + * -ENODEV when 'operating-points' property is not found or is invalid data + * in device node. + * -ENODATA when empty 'operating-points' property is found + * -EINVAL when invalid entries are found in opp-v2 table + */ +int of_init_opp_table(struct device *dev) +{ + const struct property *prop; + + /* + * OPPs have two version of bindings now. The older one is deprecated, + * try for the new binding first. + */ + prop = of_find_property(dev->of_node, "operating-points-v2", NULL); + if (!prop) { + /* + * Try old-deprecated bindings for backward compatibility with + * older dtbs. + */ + return _of_init_opp_table_v1(dev); + } + + return _of_init_opp_table_v2(dev, prop); +} EXPORT_SYMBOL_GPL(of_init_opp_table); #endif |