diff options
Diffstat (limited to 'drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c')
-rw-r--r-- | drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c new file mode 100644 index 0000000..b0eb0a2 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c @@ -0,0 +1,251 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/io.h> +#include <linux/mii.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/phy.h> +#include <linux/slab.h> +#include <linux/sxgbe_platform.h> + +#include "sxgbe_common.h" +#include "sxgbe_reg.h" + +#define SXGBE_SMA_WRITE_CMD 0x01 /* write command */ +#define SXGBE_SMA_PREAD_CMD 0x02 /* post read increament address */ +#define SXGBE_SMA_READ_CMD 0x03 /* read command */ +#define SXGBE_SMA_SKIP_ADDRFRM 0x00040000 /* skip the address frame */ +#define SXGBE_MII_BUSY 0x00800000 /* mii busy */ + +static int sxgbe_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_data) +{ + unsigned long fin_time = jiffies + 3 * HZ; /* 3 seconds */ + + while (!time_after(jiffies, fin_time)) { + if (!(readl(ioaddr + mii_data) & SXGBE_MII_BUSY)) + return 0; + cpu_relax(); + } + + return -EBUSY; +} + +static void sxgbe_mdio_ctrl_data(struct sxgbe_priv_data *sp, u32 cmd, + u16 phydata) +{ + u32 reg = phydata; + + reg |= (cmd << 16) | SXGBE_SMA_SKIP_ADDRFRM | + ((sp->clk_csr & 0x7) << 19) | SXGBE_MII_BUSY; + writel(reg, sp->ioaddr + sp->hw->mii.data); +} + +static void sxgbe_mdio_c45(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr, + int phyreg, u16 phydata) +{ + u32 reg; + + /* set mdio address register */ + reg = ((phyreg >> 16) & 0x1f) << 21; + reg |= (phyaddr << 16) | (phyreg & 0xffff); + writel(reg, sp->ioaddr + sp->hw->mii.addr); + + sxgbe_mdio_ctrl_data(sp, cmd, phydata); +} + +static void sxgbe_mdio_c22(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr, + int phyreg, u16 phydata) +{ + u32 reg; + + writel(1 << phyaddr, sp->ioaddr + SXGBE_MDIO_CLAUSE22_PORT_REG); + + /* set mdio address register */ + reg = (phyaddr << 16) | (phyreg & 0x1f); + writel(reg, sp->ioaddr + sp->hw->mii.addr); + + sxgbe_mdio_ctrl_data(sp, cmd, phydata); +} + +static int sxgbe_mdio_access(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr, + int phyreg, u16 phydata) +{ + const struct mii_regs *mii = &sp->hw->mii; + int rc; + + rc = sxgbe_mdio_busy_wait(sp->ioaddr, mii->data); + if (rc < 0) + return rc; + + if (phyreg & MII_ADDR_C45) { + sxgbe_mdio_c45(sp, cmd, phyaddr, phyreg, phydata); + } else { + /* Ports 0-3 only support C22. */ + if (phyaddr >= 4) + return -ENODEV; + + sxgbe_mdio_c22(sp, cmd, phyaddr, phyreg, phydata); + } + + return sxgbe_mdio_busy_wait(sp->ioaddr, mii->data); +} + +/** + * sxgbe_mdio_read + * @bus: points to the mii_bus structure + * @phyaddr: address of phy port + * @phyreg: address of register with in phy register + * Description: this function used for C45 and C22 MDIO Read + */ +static int sxgbe_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) +{ + struct net_device *ndev = bus->priv; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + int rc; + + rc = sxgbe_mdio_access(priv, SXGBE_SMA_READ_CMD, phyaddr, phyreg, 0); + if (rc < 0) + return rc; + + return readl(priv->ioaddr + priv->hw->mii.data) & 0xffff; +} + +/** + * sxgbe_mdio_write + * @bus: points to the mii_bus structure + * @phyaddr: address of phy port + * @phyreg: address of phy registers + * @phydata: data to be written into phy register + * Description: this function is used for C45 and C22 MDIO write + */ +static int sxgbe_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, + u16 phydata) +{ + struct net_device *ndev = bus->priv; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + + return sxgbe_mdio_access(priv, SXGBE_SMA_WRITE_CMD, phyaddr, phyreg, + phydata); +} + +int sxgbe_mdio_register(struct net_device *ndev) +{ + struct mii_bus *mdio_bus; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + struct sxgbe_mdio_bus_data *mdio_data = priv->plat->mdio_bus_data; + int err, phy_addr; + int *irqlist; + bool act; + + /* allocate the new mdio bus */ + mdio_bus = mdiobus_alloc(); + if (!mdio_bus) { + netdev_err(ndev, "%s: mii bus allocation failed\n", __func__); + return -ENOMEM; + } + + if (mdio_data->irqs) + irqlist = mdio_data->irqs; + else + irqlist = priv->mii_irq; + + /* assign mii bus fields */ + mdio_bus->name = "samsxgbe"; + mdio_bus->read = &sxgbe_mdio_read; + mdio_bus->write = &sxgbe_mdio_write; + snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%x", + mdio_bus->name, priv->plat->bus_id); + mdio_bus->priv = ndev; + mdio_bus->phy_mask = mdio_data->phy_mask; + mdio_bus->parent = priv->device; + + /* register with kernel subsystem */ + err = mdiobus_register(mdio_bus); + if (err != 0) { + netdev_err(ndev, "mdiobus register failed\n"); + goto mdiobus_err; + } + + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + struct phy_device *phy = mdio_bus->phy_map[phy_addr]; + + if (phy) { + char irq_num[4]; + char *irq_str; + /* If an IRQ was provided to be assigned after + * the bus probe, do it here. + */ + if ((mdio_data->irqs == NULL) && + (mdio_data->probed_phy_irq > 0)) { + irqlist[phy_addr] = mdio_data->probed_phy_irq; + phy->irq = mdio_data->probed_phy_irq; + } + + /* If we're going to bind the MAC to this PHY bus, + * and no PHY number was provided to the MAC, + * use the one probed here. + */ + if (priv->plat->phy_addr == -1) + priv->plat->phy_addr = phy_addr; + + act = (priv->plat->phy_addr == phy_addr); + switch (phy->irq) { + case PHY_POLL: + irq_str = "POLL"; + break; + case PHY_IGNORE_INTERRUPT: + irq_str = "IGNORE"; + break; + default: + sprintf(irq_num, "%d", phy->irq); + irq_str = irq_num; + break; + } + netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n", + phy->phy_id, phy_addr, irq_str, + dev_name(&phy->dev), act ? " active" : ""); + } + } + + if (!err) { + netdev_err(ndev, "PHY not found\n"); + mdiobus_unregister(mdio_bus); + mdiobus_free(mdio_bus); + goto mdiobus_err; + } + + priv->mii = mdio_bus; + + return 0; + +mdiobus_err: + mdiobus_free(mdio_bus); + return err; +} + +int sxgbe_mdio_unregister(struct net_device *ndev) +{ + struct sxgbe_priv_data *priv = netdev_priv(ndev); + + if (!priv->mii) + return 0; + + mdiobus_unregister(priv->mii); + priv->mii->priv = NULL; + mdiobus_free(priv->mii); + priv->mii = NULL; + + return 0; +} |