summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas
AgeCommit message (Collapse)Author
2017-05-14arm64: dts: r8a7795: Mark EthernetAVB device node disabledGeert Uytterhoeven
commit 0d1390ff283f6c38595288e7f74da6829896b8b7 upstream. Device nodes representing I/O devices should be marked disabled in the SoC-specific DTS, and overridden by board-specific DTSes where needed. Fixes: a92843c8a6f8c039 ("arm64: dts: r8a7795: add EthernetAVB device node") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-08arm64: dts: r8a7796: Add GPIO device nodesTakeshi Kihara
Add GPIO device nodes to the DT of the r8a7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-09-08arm64: dts: r8a7796: salvator-x: add serial console pinsUlrich Hecht
Adds pin control for SCIF2. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08arm64: dts: r8a7796: Add pinctrl device nodeTakeshi Kihara
This patch adds pinctrl device node for R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08arm64: dts: r8a7795: salvator-x: Configure pins for the DU RGB outputLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08arm64: dts: h3ulcb: enable GPIO ledsVladimir Barinov
This supports GPIO leds on H3ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08arm64: dts: h3ulcb: Sound SSI supportVladimir Barinov
This supports SSI sound for H3ULCB board. SSI DMA mode used. CS2000 used as AUDIO_CLK_B. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08arm64: dts: h3ulcb: enable SDHI0Vladimir Barinov
This supports SDHI0 on H3ULCB board SD card slot Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08arm64: dts: h3ulcb: enable GPIO keysVladimir Barinov
This supports GPIO keys on H3ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08arm64: dts: r8a7795: remove unnecessary cap-mmc-highspeed propertySimon Horman
Remove cap-mmc-highspeed property from SDHI2 and SDHI3. This property is unnecessary as the driver automatically sets the highspeed capability. Furthermore its use is inconsistent with SDHI0 and SDHI1 which are also highspeed capable but do not have this property present. Found by inspection. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-08arm64: dts: h3ulcb: enable USB2.0 Host channel 1Vladimir Barinov
This supports USB2.0 Host channel 1 on H3ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: h3ulcb: enable USB2 PHY of channel 1Vladimir Barinov
This supports USB2 PHY channel #1 on H3ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: h3ulcb: enable WDTVladimir Barinov
This supports watchdog timer for H3ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: h3ulcb: enable EXTALR clkVladimir Barinov
This enables EXTALR clock that can be used for the watchdog. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: h3ulcb: enable I2C2Vladimir Barinov
This supports I2C2 bus on H3ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: h3ulcb: enable EthernetAVBVladimir Barinov
This supports Ethernet AVB on H3ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: h3ulcb: enable SCIF clk and pinsVladimir Barinov
This enables the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: h3ulcb: initial device treeVladimir Barinov
Add the initial device tree for the R8A7795 SoC based H3ULCB low cost board. This commit supports the following peripherals: - SCIF (console) Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: Add SoC-specific compatible property to audio-dmac nodesGeert Uytterhoeven
The audio-dmac nodes used the generic compatible property only. Add the SoC-specific one, to make it future proof. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: renesas: salvator-x: Enable DULaurent Pinchart
Only the VGA output is supported for now. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: renesas: r8a7795: Add DU device to DTLaurent Pinchart
Add the DU device to r8a7795.dtsi in a disabled state. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: renesas: r8a7795: Add VSP instancesLaurent Pinchart
The r8a7795 has 9 VSP instances. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: renesas: r8a7795: Add FCPV nodesLaurent Pinchart
The FCPs handle the interface between various IP cores and memory. Add the instances related to the VSP2s. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: salvator-x: enable HSUSBYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: salvator-x: enable USB 2.0 Host channel 0Yoshihiro Shimoda
We have to set SW15 to pin 2-3 side on the board before we use CN9 as USB host or peripheral. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: salvator-x: enable usb2_phy of channel 0Yoshihiro Shimoda
This patch also adds a regulator node for USB2.0 to handle VBUS on/off by the phy-rcar-gen3-usb2 driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: Add HSUSB device nodeYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: set maximum frequency for SDHI clocksWolfram Sang
Define the upper limit otherwise the driver cannot utilize max speeds. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: add FDP1 device nodesKieran Bingham
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-06arm64: dts: r8a7795: add FCPF device nodesKieran Bingham
Provide nodes for the FCP devices dedicated to the FDP device channels. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-07arm64: dts: r8a7796/salvator-x: Enable watchdog timerGeert Uytterhoeven
Enable the Watchdog Timer (WDT) controller on the Renesas Salvator-X board equipped with an R-Car M3-W (r8a7796) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-07arm64: dts: r8a7796: Add RWDT nodeGeert Uytterhoeven
Add a device node for the Watchdog Timer (WDT) controller on the Renesas R-Car M3-W (r8a7796) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-07arm64: dts: r8a7796: Use SYSC "always-on" PM DomainGeert Uytterhoeven
Hook up all devices that are part of the CPG/MSSR Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-07arm64: dts: r8a7796: Add SYSC PM DomainsGeert Uytterhoeven
Add a device node for the System Controller. Hook up the Cortex-A57 CPU core and L2 cache/SCU to their respective PM Domains. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-07arm64: dts: salvator-x: add Salvator-X board on R8A7796 SoCTakeshi Kihara
This patch adds initial board support for R8A7796 Salvator-X. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-07-07arm64: dts: r8a7796: Add Renesas R8A7796 SoC supportSimon Horman
Basic support for the Gen 3 R-Car M3-W SoC. Based on work for the r8a7795 and r8a7796 SoCs by Takeshi Kihara, Dirk Behme and Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-07-07arm64: dts: r8a7795: Add CAN FD supportRamesh Shanmugasundaram
Adds CAN FD controller node for r8a7795. Note: CAN FD controller register base address specified in R-Car Gen3 Hardware User Manual v0.5E is incorrect. The correct address is: CAN FD - 0xe66c0000 Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-07arm64: dts: r8a7795: Add missing blank lines between cpu nodesGeert Uytterhoeven
For consistency with a57_0/a57_1 cpu nodes, and all other nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30arm64: dts: r8a7795: Drop 0x from unit address of gicSimon Horman
Drop 0x from unit address of gic as this is the desired form for a unit address. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-05-30arm64: dts: salvator-x: Fix W=1 dtc warningsGeert Uytterhoeven
Warning (unit_address_vs_reg): Node /regulator@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /regulator@4 has a unit name, but no reg property Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30arm64: dts: r8a7795: Fix W=1 dtc warningsGeert Uytterhoeven
Warning (unit_address_vs_reg): Node /cache-controller@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /cache-controller@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,dvc/dvc@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,dvc/dvc@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,src/src@9 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /soc/sound@ec500000/rcar_sound,ssi/ssi@9 has a unit name, but no reg property Move the cache-controller nodes under the cpus node, and make their unit names and reg properties match the MPIDR values. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30arm64: dts: r8a7795: Use SYSC "always-on" PM Domain for RWDT nodeGeert Uytterhoeven
Hook up the RWDT device node to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Cfr. commit 38dbb45ee4bc ("arm64: dts: r8a7795: Use SYSC "always-on" PM Domain") Fixes: f43838a7ae014cba ("arm64: dts: r8a7795: Add RWDT node") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30arm64: dts: salvator-x: Enable watchdog timerWolfram Sang
This patch enables watchdog timer for Salvator-X board. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30arm64: dts: r8a7795: Add RWDT nodeWolfram Sang
This patch adds the RWDT device node for r8a7795. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30arm64: dts: r8a7795: enable DMA for I2CNiklas Söderlund
Add DMA properties to the I2C nodes. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30arm64: dts: r8a7795: Increase the size of GIC-400 mapped registersPooya Keshavarzi
There are some requirements about the GIC-400 memory layout and its mapping if using 64k aligned base addresses like on r8a7795. See e.g. http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=21550029f709072aacf3b9 Map the whole memory range instead of only 0x2000. This will fix the issue that some hypervisors, e.g. Xen, fail to handle the interrupts correctly. Signed-off-by: Pooya Keshavarzi <Pooya.Keshavarzi@de.bosch.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30arm64: dts: salvator-x: SCIF1 supports RTS/CTS hardware flow controlGeert Uytterhoeven
On the Salvator-X development board, the RTS and CTS pins of debug serial-1 port SCIF1 are wired to the CP2102 Serial-USB bridge. Reflect this in the DTS by adding the "uart-has-rtscts" property to the scif1 device node. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-24Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. The Renesas R-Car power domain handling, and the Nvidia Tegra USB support both hand notable changes that required changing the DT binding in a way that only provides compatibility with old DT blobs on new kernels but not vice versa. As a consequence, the DT changes are based on top of the driver changes and are now in this branch. For NXP i.MX and Samsung Exynos, the changes in here depend on other changes that got merged through the clk maintainer tree" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3 ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250 ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk ARM: dts: exynos: Add DMC bus node for Exynos3250 ARM: tegra: Enable XUSB on Nyan ARM: tegra: Enable XUSB on Jetson TK1 ARM: tegra: Enable XUSB on Venice2 ARM: tegra: Add Tegra124 XUSB controller ARM: tegra: Move Tegra124 to the new XUSB pad controller binding ARM: dts: r8a7794: Use SYSC "always-on" PM Domain ARM: dts: r8a7793: Use SYSC "always-on" PM Domain ...
2016-04-28Merge tag 'renesas-arm64-dt2-for-v4.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64 Merge "Second Round of Renesas ARM64 Based SoC DT Updates for v4.7" from Simon Horman: * Don't disable referenced optional clocks in DT of r8a7795 SoC * Populate EXTALR in DT of salvator-x board * Enable PCIe in DT of salvator-x board * tag 'renesas-arm64-dt2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a7795: Don't disable referenced optional clocks arm64: dts: salvator-x: populate EXTALR arm64: dts: r8a7795: enable PCIe on Salvator-X arm64: dts: r8a7795: Add PCIe nodes arm64: dts: r8a7795: Use USB3.0 fallback compatibility string arm64: dts: r8a7795: Add CAN support arm64: dts: r8a7795: Add CAN external clock support
2016-04-27arm64: dts: r8a7795: Use SYSC "always-on" PM DomainGeert Uytterhoeven
Hook up all devices that are part of the CPG/MSSR Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v0.10.2 at 2024-09-27 18:14:08 (GMT)