summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ti
AgeCommit message (Collapse)Author
2013-10-23wlcore: save last regdom configuration on stopEliad Peller
In order to reconfigure the correct reg domain on recovery, we have to save the current configuration before clearing it (wl->reg_ch_conf_pending is considered before configuring a new regdomain). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fix started_vifs calculationEliad Peller
wlcore configures different dwell times according to number of active interfaces (in order to prevent hurting VO during scan). However, determining active vif only according to bss_conf->idle is not explicit enough, and might result in non-started vifs being counted as started as well (e.g. unassociated sta during sta). Fix it by checking for explicit conditions according to the vif type. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: wakeup from ELP before starting recoveryBarak Bercovitz
Make sure the FW is awake when entering recovery. This is useful for reading the FW panic log and also some FW registers giving us crash report stats. We must do this before interrupts are disabled since we rely on an interrupt to complete the wakeup. If the wakeup fails, continue recovery normally. All read/writes will be blocked and won't do any harm. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: Allow stopping fw log in recoveryBarak Bercovitz
The FW panic log is read during recovery work. It has to be stopped properly before reading. otherwise, inconsistent data might be read which cause the driver to freeze. __wlcore_cmd_send has to work for the special case of CMD_STOP_FWLOGGER, while in recovery, in order to stop the fw log before it is read. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: read fw panic log only in host modeBarak Bercovitz
Reading FW panic log is only supported in host mode (SDIO) Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore/wl18xx/wl12xx: FW log params per chip archIgal Chernobelsky
FW memory block size and FW log end marker parameters are added to wl structure and are initialized per chip architecture. convert_hwaddr hw operation is added to convert chip dependent FW internal address. Copy from FW log is also simplified to copy the entire memory block as FW logger utility is repsponsible for parsing of FW log content. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wl12xx/wl18xx: update default fw logger's settingsIdo Reis
update the fw logger mode to continuous, and output to dbgpins (uart). Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fwlog dynamic mem_block controlIdo Reis
number of fwlog mem_blocks can be configured using module param. this is a fw debug feature: in case a large fw log data is busrted during a short period of time, the memory get filled and data is lost. this allows us to dynamicly set the fw log mem_block usage, although configuring more mem_block for logger comes at the expense of TP. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fix interrogate command lengthIgal Chernobelsky
Change interrogate command prototype to have command size and returned buffer length. This fixes the issue when command parameters are needed to be passed to FW in addition to acx header as in the case with get RSSI command, where role_id has to be passed. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: add ap_event_maskEliad Peller
Add new ap_event_mask field, to indicate events that should be unmasked only when there's an ap interface. This is done in order to avoid spurious wakeups when we don't care about the incoming event anyway. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: print active channel in the driver_stateVictor Goldenshtein
Print current active channel/s and a role type for that channel in the driver_state debugfs. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wl18xx: default config alignment with phy defaultsIgal Chernobelsky
Driver default config is aligned with phy default parameters. Now that RDL1_3 has 2 antennas defined by default we need to explicitly define ht.mode to HT_MODE_WIDE to have SISO40 as default. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-10net: wireless: wl1251: update firmware pathFelipe Balbi
TI firmwares are located under ti-connectivity directory. Update path to make sure driver can find and load firmware blob. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-30wlcore: always register dummy hardirqArik Nemtsov
This keeps the kernel happy when using edge-irqs and requesting a threaded irq. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wl18xx: print new RDL versions during bootVictor Goldenshtein
Extract and print info for the new RDL 5, 6, 7 and 8. Replace const struct with function which translates the RDL number to string. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wl18xx: fix boot process in high temperature environmentVictor Goldenshtein
In addition to existing WCS PLL configuration add and enable also the coex PLL during init phase. This fixes boot failures due to silicon latchup in high temperature environment (>85c). Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Nadim Zubidat <nadimz@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wlcore: clarify and fix regulatory domain bit translationEliad Peller
Channels 52-64 were mapped incorrectly. Refactor and document wlcore_get_reg_conf_ch_idx() in order to make it clear what's going on there. While on it, fix the return value check to consider 0 as a valid return value as well (indicates channel 1). Reported-by: Yaniv Machani <yanivma@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wlcore: remove unsupported channelsEliad Peller
The fw doesn't support channels 7,9,11 in 5ghz band, so don't advertise supporting them. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wlcore: fix unsafe dereference of the wlvifVictor Goldenshtein
wlvif could be passed as NULL from the wlcore_tx_work_locked() to the wl1271_prepare_tx_frame() and to wl1271_skb_queue_head() functions. This may lead to a Kernel panic, fix this by validating that wlvif != NULL. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wlcore: cleanup scan debug printsVictor Goldenshtein
Remove scan debug dumps which are rarely used. Make scan debug prints more clear and short. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wlcore: re-enable idle handlingArik Nemtsov
We need some stuff done on idle change, most notably we have to stop sched-scanning. Take care of this by reintroducing idle handling. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wlcore: disable elp sleep while in plt modeYair Shapira
We now disable elp sleep during plt mode to allow normal operation of plt tools such as calibrator. Having elp_sleep enabled during plt mode is actually not required and in fact it disrupt plt operations such as rx statistics etc. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wlcore: add new plt power-mode: CHIP_AWAKEYair Shapira
Under this mode the chip is powered on including sdio but no FW is downloaded and run, interrupts are not enabled, etc... This mode is intended to allow RTTT to bridge sdio as a transport to the chip. Driver only provides sdio access using the dev_mem debugfs file. Some fixes done to the code that ensures that PLT mode and normal driver power mode (ifconfig/add_interface) are mutually excluded. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-30wlcore: ROC on AP channel before auth replyArik Nemtsov
Start a ROC on the AP channel beforing sending the authentication reply to a connecting STA. This ROC is held up to 1 second via a timer. If the station is authorized and added by mac80211, the ROC is extended until the station is fully authorized. We make sure not to ROC twice when several stations are connecting in parallel and to only release the ROC when both the pending-reply timer and the STA-state callbacks do not require it. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-09-26wireless: wl12xx: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26wireless: wlcore: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26wireless: wl1251: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-23mac80211: move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into driversJohannes Berg
mac80211 currently sets WIPHY_FLAG_SUPPORTS_SCHED_SCAN based on whether the start_sched_scan operation is supported or not, but that will not be correct for all drivers, we're adding scheduled scan to the iwlmvm driver but it depends on firmware support. Therefore, move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into the drivers so that they can control it regardless of implementing the operation. This currently only affects the TI drivers since they're the only ones implementing scheduled scan (in a mac80211 driver.) Acked-by: Luciano Coelho <luca@coelho.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: add vif to testmode cmdDavid Spinadel
Pass the wdev from cfg80211 on to the driver as the vif if given and it's valid for the driver. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16cfg80211/nl80211: rename packet pattern related structures and enumsAmitkumar Karwar
Currently packet patterns and it's enum/structures are used only for WoWLAN feature. As we intend to reuse them for new feature packet coalesce, they are renamed in this patch. Older names are kept for backward compatibility purpose. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-06-29wlcore: use *ppos, not file->f_posAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-17net: wireless: wl1251: Fix commenting styleSachin Kamat
Make the commenting style consistent with networking block comment style as suggested by checkpatch. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17net: wireless: wl1251: Use module_spi_driver macroSachin Kamat
module_spi_driver() eliminates some boiler plate and makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17net/wireless/ti/wlcore/spi: Use module_spi_driver to register driverPeter Huewe
Removing some boilerplate by using module_spi_driver instead of calling register and unregister in the otherwise empty init/exit functions Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: fix occasional AP TX stop after recoveryVictor Goldenshtein
The fw_status wasn't zeroed during allocation, resulting in uninitialized var usage, and finally causing AP traffic stop after recovery. The wrong value in fw_status_2->counters.tx_lnk_free_pkts led to a bad lnk->allocated_pkts calculation in wlcore_fw_status(), causing wl18xx_lnk_low_prio() to return FALSE (lnk->allocated_pkts > thold). This eventually blocked the link in wlcore_tx_work_locked(), as wl1271_skb_dequeue() continuously returned NULL. Fix it by zeroing wl->fw_status_1/2 during allocation. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: hold jiffies in unsigned longArik Nemtsov
u32 can be incorrect (too small) for some architectures. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: cancel channel switch work on interface removalArik Nemtsov
Otherwise, if the work is pending, we might get a bad dereference after the interface is removed. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: set default_wep_key when configuredYoni Divinsky
When associating to an AP with WEP set the default key upon association by implementing the set_deafult_key_idx op. Fixes auto-arp sent with wrong key_idx bug. Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wl18xx: use locally administered MAC address if not available from fuseLuciano Coelho
In some R&D chips, the device may be left untrimmed and with the MAC address missing from fuse ROM. In order to support those devices, apply a random locally administered MAC address instead. Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: configure rates in multiple casesEliad Peller
The current code configures the peer caps only on BSS_CHANGED_HT notification. However, we have to configure the peer caps (and rates) even when HT is not enabled. Otherwise, the fw continues working with low rates. Configure the peer caps when sta_exists is true (i.e. when we extracted the sta rates, e.g. on association). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: move sysfs handling to a separate fileLuciano Coelho
Instead of doing all the sysfs file handling in the main file, move it to a new sysfs source file to reduce the amount of code in a single file. Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: some non-functional clean-ups in main.cLuciano Coelho
Remove unnecessary includes; remove duplicate and useless defines; fix copyright notice and remove some unnecessary line breaks. Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wl18xx: FDSP Code RAM Corruption fixIdo Reis
In PG2.0 there is an issue where PHY's FDSP Code RAM sometimes gets corrupted when exiting from ELP mode. This issue is related to FDSP Code RAM clock implementation. PG2.1 introduces a HW fix for this issue that requires the driver to change the FDSP Code Ram clock settings (mux it to ATGP clock instead of its own clock). This workaround uses PHY_FPGA_SPARE_1 register and is relevant to WL8 PG2.1 devices. The fix is also backward compatible with older PG2.0 devices where the register PHY_FPGA_SPARE_1 is not used and not connected. The fix is done in the wl18xx_pre_upload function (must be performed before uploading the FW code) and includes the following steps: 1. Disable FDSP clock 2. Set ATPG clock toward FDSP Code RAM rather than its own clock. 3. Re-enable FDSP clock Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2013-06-12wl12xx/wl18xx: scan all 5ghz channelsEliad Peller
Due to a typo, the current code copies only sizeof(cmd->channels_2) bytes, which is smaller than the correct sizeof(cmd->channels_5) size, resulting in a partial scan (some channels are skipped). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wl12xx: increase minimum singlerole firmware version requiredLuciano Coelho
The minimum firmware version required for singlerole after recent driver changes is 6/7.3.10.0.133. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wl12xx: fix minimum required firmware version for wl127x multiroleLuciano Coelho
There was a typo in commit 8675f9 (wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions), which was causing the multirole firmware for wl127x (WiLink6) to be rejected. The actual minimum version needed for wl127x multirole is 6.5.7.0.42. Reported-by: Levi Pearson <levipearson@gmail.com> Reported-by: Michael Scott <hashcode0f@gmail.com> Cc: stable@kernel.org # 3.9+ Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03cfg80211: take WoWLAN support information out of wiphy structJohannes Berg
There's no need to take up the space for devices that don't support WoWLAN, and most drivers can even make the support data static const (except where it's modified at runtime.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v0.10.2 at 2024-08-31 01:42:05 (GMT)