From 546be91915a17e4faa9df91caa3ace0c92efa3ab Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 19 Apr 2008 10:41:43 -0500 Subject: [PPC] Remove mpc8272 ads board from arch/ppc We have a board port in arch/powerpc so we dont need this one anymore. Signed-off-by: Kumar Gala diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c index bcc3aa9..d38b57e 100644 --- a/arch/ppc/8260_io/fcc_enet.c +++ b/arch/ppc/8260_io/fcc_enet.c @@ -165,9 +165,6 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); #ifdef CONFIG_SBC82xx #define F1_RXCLK 9 #define F1_TXCLK 10 -#elif defined(CONFIG_ADS8272) -#define F1_RXCLK 11 -#define F1_TXCLK 10 #else #define F1_RXCLK 12 #define F1_TXCLK 11 @@ -175,13 +172,8 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); /* FCC2 Clock Source Configuration. There are board specific. Can only choose from CLK13-16 */ -#ifdef CONFIG_ADS8272 -#define F2_RXCLK 15 -#define F2_TXCLK 16 -#else #define F2_RXCLK 13 #define F2_TXCLK 14 -#endif /* FCC3 Clock Source Configuration. There are board specific. Can only choose from CLK13-16 */ @@ -289,10 +281,7 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); /* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */ #define PC_MDIO ((uint)0x00000002) #define PC_MDCK ((uint)0x00000001) -#elif defined(CONFIG_ADS8272) -#define PC_MDIO ((uint)0x00002000) -#define PC_MDCK ((uint)0x00001000) -#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260) || defined(CONFIG_PQ2FADS) +#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260) #define PC_MDIO ((uint)0x00400000) #define PC_MDCK ((uint)0x00200000) #else @@ -2118,11 +2107,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev) printk("Can't get FCC IRQ %d\n", fip->fc_interrupt); #ifdef PHY_INTERRUPT -#ifdef CONFIG_ADS8272 - if (request_irq(PHY_INTERRUPT, mii_link_interrupt, IRQF_SHARED, - "mii", dev) < 0) - printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT); -#else /* Make IRQn edge triggered. This does not work if PHY_INTERRUPT is * on Port C. */ @@ -2132,7 +2116,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev) if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) < 0) printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT); -#endif #endif /* PHY_INTERRUPT */ /* Set GFMR to enable Ethernet operating mode. diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index abc877f..3fc45e2 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -666,9 +666,6 @@ config TQM8260 End of Life: not yet :-) URL: -config ADS8272 - bool "ADS8272" - config PQ2FADS bool "Freescale-PQ2FADS" help @@ -698,11 +695,6 @@ config EV64360 platform. endchoice -config PQ2ADS - bool - depends on ADS8272 - default y - config TQM8xxL bool depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) @@ -725,15 +717,6 @@ config 8260 this option means that you wish to build a kernel for a machine with an 8260 class CPU. -config 8272 - bool - depends on 6xx - default y if ADS8272 - select 8260 - help - The MPC8272 CPM has a different internal dpram setup than other CPM2 - devices - config CPM1 bool depends on 8xx @@ -1069,7 +1052,7 @@ config PCI_8260 config 8260_PCI9 bool "Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 && !ADS8272 + depends on PCI_8260 default y choice diff --git a/arch/ppc/configs/ads8272_defconfig b/arch/ppc/configs/ads8272_defconfig deleted file mode 100644 index 6619f91..0000000 --- a/arch/ppc/configs/ads8272_defconfig +++ /dev/null @@ -1,930 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc5 -# Wed Apr 4 20:55:16 2007 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -CONFIG_PPC_FPU=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_EMBEDDEDBOOT=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# - -# -# Freescale Ethernet driver platform-specific options -# -# CONFIG_PPC_PREP is not set -# CONFIG_APUS is not set -# CONFIG_KATANA is not set -# CONFIG_WILLOW is not set -# CONFIG_CPCI690 is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_CHESTNUT is not set -# CONFIG_SPRUCE is not set -# CONFIG_HDPU is not set -# CONFIG_EV64260 is not set -# CONFIG_LOPEC is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_RADSTONE_PPC7D is not set -# CONFIG_PAL4 is not set -# CONFIG_EST8260 is not set -# CONFIG_SBC82xx is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX8260 is not set -# CONFIG_TQM8260 is not set -CONFIG_ADS8272=y -# CONFIG_PQ2FADS is not set -# CONFIG_LITE5200 is not set -# CONFIG_MPC834x_SYS is not set -# CONFIG_EV64360 is not set -CONFIG_PQ2ADS=y -CONFIG_8260=y -CONFIG_8272=y -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_HIGHMEM is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -# CONFIG_PPC_I8259 is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_8260=y - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -CONFIG_DAVICOM_PHY=y -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set -CONFIG_FS_ENET=y -# CONFIG_FS_ENET_HAS_SCC is not set -CONFIG_FS_ENET_HAS_FCC=y - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -CONFIG_SERIAL_CPM_SCC4=y -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -# CONFIG_FB is not set -# CONFIG_FB_IBM_GXT4500 is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_KGDB_CONSOLE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 40f53fb..ef74a7b 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -4,7 +4,6 @@ obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o -obj-$(CONFIG_PQ2ADS) += pq2ads.o obj-$(CONFIG_TQM8260) += tqm8260_setup.o obj-$(CONFIG_CPCI690) += cpci690.o obj-$(CONFIG_EV64260) += ev64260.o @@ -26,4 +25,3 @@ obj-$(CONFIG_LITE5200) += lite5200.o obj-$(CONFIG_EV64360) += ev64360.o obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o -obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c deleted file mode 100644 index 47f4b38..0000000 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * arch/ppc/platforms/mpc8272ads_setup.c - * - * MPC82xx Board-specific PlatformDevice descriptions - * - * 2005 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "pq2ads_pd.h" - -static void init_fcc1_ioports(struct fs_platform_info*); -static void init_fcc2_ioports(struct fs_platform_info*); -static void init_scc1_uart_ioports(struct fs_uart_platform_info*); -static void init_scc4_uart_ioports(struct fs_uart_platform_info*); - -static struct fs_uart_platform_info mpc8272_uart_pdata[] = { - [fsid_scc1_uart] = { - .init_ioports = init_scc1_uart_ioports, - .fs_no = fsid_scc1_uart, - .brg = 1, - .tx_num_fifo = 4, - .tx_buf_size = 32, - .rx_num_fifo = 4, - .rx_buf_size = 32, - }, - [fsid_scc4_uart] = { - .init_ioports = init_scc4_uart_ioports, - .fs_no = fsid_scc4_uart, - .brg = 4, - .tx_num_fifo = 4, - .tx_buf_size = 32, - .rx_num_fifo = 4, - .rx_buf_size = 32, - }, -}; - -static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = { - .mdio_dat.bit = 18, - .mdio_dir.bit = 18, - .mdc_dat.bit = 19, - .delay = 1, -}; - -static struct fs_platform_info mpc82xx_enet_pdata[] = { - [fsid_fcc1] = { - .fs_no = fsid_fcc1, - .cp_page = CPM_CR_FCC1_PAGE, - .cp_block = CPM_CR_FCC1_SBLOCK, - - .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), - .clk_route = CMX1_CLK_ROUTE, - .clk_mask = CMX1_CLK_MASK, - .init_ioports = init_fcc1_ioports, - - .mem_offset = FCC1_MEM_OFFSET, - - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, - .bus_id = "0:00", - }, - [fsid_fcc2] = { - .fs_no = fsid_fcc2, - .cp_page = CPM_CR_FCC2_PAGE, - .cp_block = CPM_CR_FCC2_SBLOCK, - .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), - .clk_route = CMX2_CLK_ROUTE, - .clk_mask = CMX2_CLK_MASK, - .init_ioports = init_fcc2_ioports, - - .mem_offset = FCC2_MEM_OFFSET, - - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, - .bus_id = "0:03", - }, -}; - -static void init_fcc1_ioports(struct fs_platform_info* pdata) -{ - struct io_port *io; - u32 tempval; - cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); - u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32)); - - io = &immap->im_ioport; - - /* Enable the PHY */ - clrbits32(bcsr, BCSR1_FETHIEN); - setbits32(bcsr, BCSR1_FETH_RST); - - /* FCC1 pins are on port A/C. */ - /* Configure port A and C pins for FCC1 Ethernet. */ - - tempval = in_be32(&io->iop_pdira); - tempval &= ~PA1_DIRA0; - tempval |= PA1_DIRA1; - out_be32(&io->iop_pdira, tempval); - - tempval = in_be32(&io->iop_psora); - tempval &= ~PA1_PSORA0; - tempval |= PA1_PSORA1; - out_be32(&io->iop_psora, tempval); - - setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1); - - /* Alter clocks */ - tempval = PC_F1TXCLK|PC_F1RXCLK; - - clrbits32(&io->iop_psorc, tempval); - clrbits32(&io->iop_pdirc, tempval); - setbits32(&io->iop_pparc, tempval); - - clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK); - setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE); - iounmap(bcsr); - iounmap(immap); -} - -static void init_fcc2_ioports(struct fs_platform_info* pdata) -{ - cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); - u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32)); - - struct io_port *io; - u32 tempval; - - immap = cpm2_immr; - - io = &immap->im_ioport; - - /* Enable the PHY */ - clrbits32(bcsr, BCSR3_FETHIEN2); - setbits32(bcsr, BCSR3_FETH2_RST); - - /* FCC2 are port B/C. */ - /* Configure port A and C pins for FCC2 Ethernet. */ - - tempval = in_be32(&io->iop_pdirb); - tempval &= ~PB2_DIRB0; - tempval |= PB2_DIRB1; - out_be32(&io->iop_pdirb, tempval); - - tempval = in_be32(&io->iop_psorb); - tempval &= ~PB2_PSORB0; - tempval |= PB2_PSORB1; - out_be32(&io->iop_psorb, tempval); - - setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1); - - tempval = PC_F2RXCLK|PC_F2TXCLK; - - /* Alter clocks */ - clrbits32(&io->iop_psorc,tempval); - clrbits32(&io->iop_pdirc,tempval); - setbits32(&io->iop_pparc,tempval); - - clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK); - setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE); - - iounmap(bcsr); - iounmap(immap); -} - - -static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev, - int idx) -{ - bd_t* bi = (void*)__res; - int fs_no = fsid_fcc1+pdev->id-1; - - if(fs_no >= ARRAY_SIZE(mpc82xx_enet_pdata)) { - return; - } - - mpc82xx_enet_pdata[fs_no].dpram_offset= - (u32)cpm2_immr->im_dprambase; - mpc82xx_enet_pdata[fs_no].fcc_regs_c = - (u32)cpm2_immr->im_fcc_c; - memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6); - - /* prevent dup mac */ - if(fs_no == fsid_fcc2) - mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1; - - pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no]; -} - -static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, - int idx) -{ - bd_t *bd = (bd_t *) __res; - struct fs_uart_platform_info *pinfo; - int num = ARRAY_SIZE(mpc8272_uart_pdata); - int id = fs_uart_id_scc2fsid(idx); - - /* no need to alter anything if console */ - if ((id < num) && (!pdev->dev.platform_data)) { - pinfo = &mpc8272_uart_pdata[id]; - pinfo->uart_clk = bd->bi_intfreq; - pdev->dev.platform_data = pinfo; - } -} - -static void init_scc1_uart_ioports(struct fs_uart_platform_info* pdata) -{ - cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); - - /* SCC1 is only on port D */ - setbits32(&immap->im_ioport.iop_ppard,0x00000003); - clrbits32(&immap->im_ioport.iop_psord,0x00000001); - setbits32(&immap->im_ioport.iop_psord,0x00000002); - clrbits32(&immap->im_ioport.iop_pdird,0x00000001); - setbits32(&immap->im_ioport.iop_pdird,0x00000002); - - /* Wire BRG1 to SCC1 */ - clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff); - - iounmap(immap); -} - -static void init_scc4_uart_ioports(struct fs_uart_platform_info* pdata) -{ - cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); - - setbits32(&immap->im_ioport.iop_ppard,0x00000600); - clrbits32(&immap->im_ioport.iop_psord,0x00000600); - clrbits32(&immap->im_ioport.iop_pdird,0x00000200); - setbits32(&immap->im_ioport.iop_pdird,0x00000400); - - /* Wire BRG4 to SCC4 */ - clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff); - setbits32(&immap->im_cpmux.cmx_scr,0x0000001b); - - iounmap(immap); -} - -static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev, - int idx) -{ - m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT; - m82xx_mii_bb_pdata.irq[1] = PHY_POLL; - m82xx_mii_bb_pdata.irq[2] = PHY_POLL; - m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT; - m82xx_mii_bb_pdata.irq[31] = PHY_POLL; - - - m82xx_mii_bb_pdata.mdio_dat.offset = - (u32)&cpm2_immr->im_ioport.iop_pdatc; - - m82xx_mii_bb_pdata.mdio_dir.offset = - (u32)&cpm2_immr->im_ioport.iop_pdirc; - - m82xx_mii_bb_pdata.mdc_dat.offset = - (u32)&cpm2_immr->im_ioport.iop_pdatc; - - - pdev->dev.platform_data = &m82xx_mii_bb_pdata; -} - -static int mpc8272ads_platform_notify(struct device *dev) -{ - static const struct platform_notify_dev_map dev_map[] = { - { - .bus_id = "fsl-cpm-fcc", - .rtn = mpc8272ads_fixup_enet_pdata, - }, - { - .bus_id = "fsl-cpm-scc:uart", - .rtn = mpc8272ads_fixup_uart_pdata, - }, - { - .bus_id = "fsl-bb-mdio", - .rtn = mpc8272ads_fixup_mdio_pdata, - }, - { - .bus_id = NULL - } - }; - platform_notify_map(dev_map,dev); - - return 0; - -} - -int __init mpc8272ads_init(void) -{ - printk(KERN_NOTICE "mpc8272ads: Init\n"); - - platform_notify = mpc8272ads_platform_notify; - - ppc_sys_device_initfunc(); - - ppc_sys_device_disable_all(); - ppc_sys_device_enable(MPC82xx_CPM_FCC1); - ppc_sys_device_enable(MPC82xx_CPM_FCC2); - - /* to be ready for console, let's attach pdata here */ -#ifdef CONFIG_SERIAL_CPM_SCC1 - ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART); - ppc_sys_device_enable(MPC82xx_CPM_SCC1); - -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC4 - ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART); - ppc_sys_device_enable(MPC82xx_CPM_SCC4); -#endif - - ppc_sys_device_enable(MPC82xx_MDIO_BB); - - return 0; -} - -/* - To prevent confusion, console selection is gross: - by 0 assumed SCC1 and by 1 assumed SCC4 - */ -struct platform_device* early_uart_get_pdev(int index) -{ - bd_t *bd = (bd_t *) __res; - struct fs_uart_platform_info *pinfo; - - struct platform_device* pdev = NULL; - if(index) { /*assume SCC4 here*/ - pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4]; - pinfo = &mpc8272_uart_pdata[fsid_scc4_uart]; - } else { /*over SCC1*/ - pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1]; - pinfo = &mpc8272_uart_pdata[fsid_scc1_uart]; - } - - pinfo->uart_clk = bd->bi_intfreq; - pdev->dev.platform_data = pinfo; - ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR); - return NULL; -} - -arch_initcall(mpc8272ads_init); diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c deleted file mode 100644 index 7fc2e02..0000000 --- a/arch/ppc/platforms/pq2ads.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * PQ2ADS platform support - * - * Author: Kumar Gala - * Derived from: est8260_setup.c by Allen Curtis - * - * Copyright 2004 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include - -#include -#include -#include -#include - -void __init -m82xx_board_setup(void) -{ - cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); - u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32)); - - /* Enable the 2nd UART port */ - clrbits32(bcsr, BCSR1_RS232_EN2); - -#ifdef CONFIG_SERIAL_CPM_SCC1 - clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC2 - clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC3 - clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC4 - clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - - iounmap(bcsr); - iounmap(immap); -} diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h deleted file mode 100644 index 2b287f4..0000000 --- a/arch/ppc/platforms/pq2ads.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * A collection of structures, addresses, and values associated with - * the Motorola MPC8260ADS/MPC8266ADS-PCI boards. - * Copied from the RPX-Classic and SBS8260 stuff. - * - * Copyright (c) 2001 Dan Malek (dan@mvista.com) - */ -#ifdef __KERNEL__ -#ifndef __MACH_ADS8260_DEFS -#define __MACH_ADS8260_DEFS - - -#include - -#if defined(CONFIG_ADS8272) -#define BOARD_CHIP_NAME "8272" -#endif - -/* Memory map is configured by the PROM startup. - * We just map a few things we need. The CSR is actually 4 byte-wide - * registers that can be accessed as 8-, 16-, or 32-bit values. - */ -#define CPM_MAP_ADDR ((uint)0xf0000000) -#define BCSR_ADDR ((uint)0xf4500000) -#define BCSR_SIZE ((uint)(32 * 1024)) - -#define BOOTROM_RESTART_ADDR ((uint)0xff000104) - -/* For our show_cpuinfo hooks. */ -#define CPUINFO_VENDOR "Motorola" -#define CPUINFO_MACHINE "PQ2 ADS PowerPC" - -/* The ADS8260 has 16, 32-bit wide control/status registers, accessed - * only on word boundaries. - * Not all are used (yet), or are interesting to us (yet). - */ - -/* Things of interest in the CSR. -*/ -#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */ -#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */ -#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable */ -#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */ -#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable */ -#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable */ -#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */ -#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */ - -#define PHY_INTERRUPT SIU_INT_IRQ7 - -#ifdef CONFIG_PCI -/* PCI interrupt controller */ -#define PCI_INT_STAT_REG 0xF8200000 -#define PCI_INT_MASK_REG 0xF8200004 -#define PIRQA (NR_CPM_INTS + 0) -#define PIRQB (NR_CPM_INTS + 1) -#define PIRQC (NR_CPM_INTS + 2) -#define PIRQD (NR_CPM_INTS + 3) - -/* - * PCI memory map definitions for MPC8266ADS-PCI. - * - * processor view - * local address PCI address target - * 0x80000000-0x9FFFFFFF 0x80000000-0x9FFFFFFF PCI mem with prefetch - * 0xA0000000-0xBFFFFFFF 0xA0000000-0xBFFFFFFF PCI mem w/o prefetch - * 0xF4000000-0xF7FFFFFF 0x00000000-0x03FFFFFF PCI IO - * - * PCI master view - * local address PCI address target - * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory - */ - -/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h - Here we should redefine what is unique for this board */ -#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ -#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ -#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ - -#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ -#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ - -#if defined(CONFIG_ADS8272) -#define PCI_INT_TO_SIU SIU_INT_IRQ2 -#elif defined(CONFIG_PQ2FADS) -#define PCI_INT_TO_SIU SIU_INT_IRQ6 -#else -#warning PCI Bridge will be without interrupts support -#endif - -#endif /* CONFIG_PCI */ - -#endif /* __MACH_ADS8260_DEFS */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h deleted file mode 100644 index 672483d..0000000 --- a/arch/ppc/platforms/pq2ads_pd.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef __PQ2ADS_PD_H -#define __PQ2ADS_PD_H -/* - * arch/ppc/platforms/82xx/pq2ads_pd.h - * - * Some defines for MPC82xx board-specific PlatformDevice descriptions - * - * 2005 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/* FCC1 Clock Source Configuration. These can be redefined in the board specific file. - Can only choose from CLK9-12 */ - -#define F1_RXCLK 11 -#define F1_TXCLK 10 - -/* FCC2 Clock Source Configuration. These can be redefined in the board specific file. - Can only choose from CLK13-16 */ -#define F2_RXCLK 15 -#define F2_TXCLK 16 - -/* FCC3 Clock Source Configuration. These can be redefined in the board specific file. - Can only choose from CLK13-16 */ -#define F3_RXCLK 13 -#define F3_TXCLK 14 - -#endif diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 46588fa..b405837 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -175,12 +175,6 @@ m8260_init_IRQ(void) * in case the boot rom changed something on us. */ cpm2_immr->im_intctl.ic_siprr = 0x05309770; - -#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS)) - /* Initialize stuff for the 82xx CPLD IC and install demux */ - pq2pci_init_irq(); -#endif - } /* diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c index fe860d5..657a1c2 100644 --- a/arch/ppc/syslib/m82xx_pci.c +++ b/arch/ppc/syslib/m82xx_pci.c @@ -150,14 +150,6 @@ pq2pci_init_irq(void) { int irq; volatile cpm2_map_t *immap = cpm2_immr; -#if defined CONFIG_ADS8272 - /* configure chip select for PCI interrupt controller */ - immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801; - immap->im_memctl.memc_or3 = 0xffff8010; -#elif defined CONFIG_PQ2FADS - immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801; - immap->im_memctl.memc_or8 = 0xffff8010; -#endif for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) irq_desc[irq].chip = &pq2pci_ic; @@ -222,26 +214,6 @@ pq2ads_setup_pci(struct pci_controller *hose) immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; #endif -#if defined CONFIG_ADS8272 - immap->im_siu_conf.siu_82xx.sc_siumcr = - (immap->im_siu_conf.siu_82xx.sc_siumcr & - ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE | - SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 | - SIUMCR_LBPC11 | SIUMCR_APPC11 | - SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) | - SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | - SIUMCR_APPC10 | SIUMCR_CS10PC00 | - SIUMCR_BCTLC00 | SIUMCR_MMR11 ; - -#elif defined CONFIG_PQ2FADS - /* - * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), - * and local bus for PCI (SIUMCR [LBPC]). - */ - immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.siu_82xx.sc_siumcr & - ~(SIUMCR_L2CPC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | - SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10); -#endif /* Enable PCI */ immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); @@ -284,12 +256,6 @@ pq2ads_setup_pci(struct pci_controller *hose) immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); -#if defined CONFIG_ADS8272 - /* PCI int highest prio */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745; -#elif defined CONFIG_PQ2FADS - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; -#endif /* park bus on PCI */ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; @@ -320,10 +286,6 @@ void __init pq2_find_bridges(void) hose->bus_offset = 0; hose->last_busno = 0xff; -#ifdef CONFIG_ADS8272 - hose->set_cfg_type = 1; -#endif - setup_m8260_indirect_pci(hose, (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h index 23579d4..402ba15 100644 --- a/include/asm-ppc/mpc8260.h +++ b/include/asm-ppc/mpc8260.h @@ -35,10 +35,6 @@ #include #endif -#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) -#include -#endif - #ifdef CONFIG_PCI_8260 #include #endif -- cgit v0.10.2 From 87c448c2f2dd734910617274637e726c82d0af25 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 19 Apr 2008 10:48:34 -0500 Subject: [PPC] Remove mpc885ads and mpc86x ads boards from arch/ppc We have a board port in arch/powerpc so we dont need this one anymore. Signed-off-by: Kumar Gala diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c index c6d047a..5899aea 100644 --- a/arch/ppc/8xx_io/enet.c +++ b/arch/ppc/8xx_io/enet.c @@ -946,29 +946,6 @@ static int __init scc_enet_init(void) *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; #endif -#ifdef CONFIG_MPC885ADS - - /* Deassert PHY reset and enable the PHY. - */ - { - volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE); - uint tmp; - - tmp = in_be32(bcsr + 1 /* BCSR1 */); - tmp |= BCSR1_ETHEN; - out_be32(bcsr + 1, tmp); - tmp = in_be32(bcsr + 4 /* BCSR4 */); - tmp |= BCSR4_ETH10_RST; - out_be32(bcsr + 4, tmp); - iounmap(bcsr); - } - - /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode - * upon reset. SCC is set to half duplex by default. So this - * inconsistency should be better fixed by the software. - */ -#endif - dev->base_addr = (unsigned long)ep; #if 0 dev->name = "CPM_ENET"; diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 3fc45e2..0f1863e 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -372,22 +372,6 @@ config MPC8XXFADS bool "FADS" select FADS -config MPC86XADS - bool "MPC86XADS" - help - MPC86x Application Development System by Freescale Semiconductor. - The MPC86xADS is meant to serve as a platform for s/w and h/w - development around the MPC86X processor families. - select FADS - -config MPC885ADS - bool "MPC885ADS" - help - Freescale Semiconductor MPC885 Application Development System (ADS). - Also known as DUET. - The MPC885ADS is meant to serve as a platform for s/w and h/w - development around the MPC885 processor family. - config TQM823L bool "TQM823L" help @@ -479,53 +463,6 @@ config WINCEPT endchoice -menu "Freescale Ethernet driver platform-specific options" - depends on FS_ENET - - config MPC8xx_SECOND_ETH - bool "Second Ethernet channel" - depends on (MPC885ADS || MPC86XADS) - default y - help - This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. - The latter will use SCC1, for 885ADS you can select it below. - - choice - prompt "Second Ethernet channel" - depends on MPC8xx_SECOND_ETH - default MPC8xx_SECOND_ETH_FEC2 - - config MPC8xx_SECOND_ETH_FEC2 - bool "FEC2" - depends on MPC885ADS - help - Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 - (often 2-nd UART) will not work if this is enabled. - - config MPC8xx_SECOND_ETH_SCC1 - bool "SCC1" - depends on MPC86XADS - select MPC8xx_SCC_ENET_FIXED - help - Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1 - (often 1-nd UART) will not work if this is enabled. - - config MPC8xx_SECOND_ETH_SCC3 - bool "SCC3" - depends on MPC885ADS - help - Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 - (often 1-nd UART) will not work if this is enabled. - - endchoice - - config MPC8xx_SCC_ENET_FIXED - depends on MPC8xx_SECOND_ETH_SCC - default n - bool "Use fixed MII-less mode for SCC Ethernet" - -endmenu - choice prompt "Machine Type" depends on 6xx diff --git a/arch/ppc/configs/mpc86x_ads_defconfig b/arch/ppc/configs/mpc86x_ads_defconfig deleted file mode 100644 index f63c6f5..0000000 --- a/arch/ppc/configs/mpc86x_ads_defconfig +++ /dev/null @@ -1,633 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Tue Jun 14 13:36:35 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_BASE_FULL is not set -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SHMEM is not set -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -CONFIG_8xx=y -# CONFIG_E500 is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set -CONFIG_EMBEDDEDBOOT=y -# CONFIG_PM is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -CONFIG_FADS=y -# CONFIG_RPXLITE is not set -# CONFIG_RPXCLASSIC is not set -# CONFIG_BSEIP is not set -# CONFIG_MPC8XXFADS is not set -CONFIG_MPC86XADS=y -# CONFIG_TQM823L is not set -# CONFIG_TQM850L is not set -# CONFIG_TQM855L is not set -# CONFIG_TQM860L is not set -# CONFIG_FPS850L is not set -# CONFIG_SPD823TS is not set -# CONFIG_IVMS8 is not set -# CONFIG_IVML24 is not set -# CONFIG_SM850 is not set -# CONFIG_HERMES_PRO is not set -# CONFIG_IP860 is not set -# CONFIG_LWMON is not set -# CONFIG_PCU_E is not set -# CONFIG_CCM is not set -# CONFIG_LANTEC is not set -# CONFIG_MBX is not set -# CONFIG_WINCEPT is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_QSPAN is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -# CONFIG_SERIAL_CPM_SMC2 is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# MPC8xx CPM Options -# -CONFIG_SCC_ENET=y -CONFIG_SCC1_ENET=y -# CONFIG_SCC2_ENET is not set -# CONFIG_SCC3_ENET is not set -# CONFIG_FEC_ENET is not set -# CONFIG_ENET_BIG_BUFFERS is not set - -# -# Generic MPC8xx Options -# -# CONFIG_8xx_COPYBACK is not set -# CONFIG_8xx_CPU6 is not set -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc885ads_defconfig b/arch/ppc/configs/mpc885ads_defconfig deleted file mode 100644 index 016f94d..0000000 --- a/arch/ppc/configs/mpc885ads_defconfig +++ /dev/null @@ -1,622 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6 -# Thu Jun 9 21:17:29 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -CONFIG_8xx=y -# CONFIG_E500 is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set -CONFIG_EMBEDDEDBOOT=y -# CONFIG_PM is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -# CONFIG_RPXLITE is not set -# CONFIG_RPXCLASSIC is not set -# CONFIG_BSEIP is not set -# CONFIG_FADS is not set -CONFIG_MPC885ADS=y -# CONFIG_TQM823L is not set -# CONFIG_TQM850L is not set -# CONFIG_TQM855L is not set -# CONFIG_TQM860L is not set -# CONFIG_FPS850L is not set -# CONFIG_SPD823TS is not set -# CONFIG_IVMS8 is not set -# CONFIG_IVML24 is not set -# CONFIG_SM850 is not set -# CONFIG_HERMES_PRO is not set -# CONFIG_IP860 is not set -# CONFIG_LWMON is not set -# CONFIG_PCU_E is not set -# CONFIG_CCM is not set -# CONFIG_LANTEC is not set -# CONFIG_MBX is not set -# CONFIG_WINCEPT is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_QSPAN is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=y -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=y -CONFIG_PPP_DEFLATE=y -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# MPC8xx CPM Options -# -CONFIG_SCC_ENET=y -# CONFIG_SCC1_ENET is not set -# CONFIG_SCC2_ENET is not set -CONFIG_SCC3_ENET=y -# CONFIG_FEC_ENET is not set -# CONFIG_ENET_BIG_BUFFERS is not set - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -CONFIG_8xx_CPU6=y -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index ef74a7b..6260231 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -23,5 +23,3 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o obj-$(CONFIG_SPRUCE) += spruce.o obj-$(CONFIG_LITE5200) += lite5200.o obj-$(CONFIG_EV64360) += ev64360.o -obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o -obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h index 2f9f0f6..5219366 100644 --- a/arch/ppc/platforms/fads.h +++ b/arch/ppc/platforms/fads.h @@ -22,29 +22,6 @@ #include -#if defined(CONFIG_MPC86XADS) - -#define BOARD_CHIP_NAME "MPC86X" - -/* U-Boot maps BCSR to 0xff080000 */ -#define BCSR_ADDR ((uint)0xff080000) - -/* MPC86XADS has one more CPLD and an additional BCSR. - */ -#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) -#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) - -#define BCSR5_T1_RST 0x10 -#define BCSR5_ATM155_RST 0x08 -#define BCSR5_ATM25_RST 0x04 -#define BCSR5_MII1_EN 0x02 -#define BCSR5_MII1_RST 0x01 - -/* There is no PHY link change interrupt */ -#define PHY_INTERRUPT (-1) - -#else /* FADS */ - /* Memory map is configured by the PROM startup. * I tried to follow the FADS manual, although the startup PROM * dictates this and we simply have to move some of the physical @@ -55,8 +32,6 @@ /* PHY link change interrupt */ #define PHY_INTERRUPT SIU_IRQ2 -#endif /* CONFIG_MPC86XADS */ - #define BCSR_SIZE ((uint)(64 * 1024)) #define BCSR0 ((uint)(BCSR_ADDR + 0x00)) #define BCSR1 ((uint)(BCSR_ADDR + 0x04)) diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h deleted file mode 100644 index d3bbbb3..0000000 --- a/arch/ppc/platforms/mpc885ads.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * A collection of structures, addresses, and values associated with - * the Freescale MPC885ADS board. - * Copied from the FADS stuff. - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_MPC885ADS_H__ -#define __ASM_MPC885ADS_H__ - - -#include - -/* U-Boot maps BCSR to 0xff080000 */ -#define BCSR_ADDR ((uint)0xff080000) -#define BCSR_SIZE ((uint)32) -#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) -#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) -#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) -#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) -#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) - -#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) -#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) - -#define IMAP_ADDR ((uint)0xff000000) -#define IMAP_SIZE ((uint)(64 * 1024)) - -#define PCMCIA_MEM_ADDR ((uint)0xff020000) -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) - -/* Bits of interest in the BCSRs. - */ -#define BCSR1_ETHEN ((uint)0x20000000) -#define BCSR1_IRDAEN ((uint)0x10000000) -#define BCSR1_RS232EN_1 ((uint)0x01000000) -#define BCSR1_PCCEN ((uint)0x00800000) -#define BCSR1_PCCVCC0 ((uint)0x00400000) -#define BCSR1_PCCVPP0 ((uint)0x00200000) -#define BCSR1_PCCVPP1 ((uint)0x00100000) -#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) -#define BCSR1_RS232EN_2 ((uint)0x00040000) -#define BCSR1_PCCVCC1 ((uint)0x00010000) -#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) - -#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ -#define BCSR4_USB_LO_SPD ((uint)0x04000000) -#define BCSR4_USB_VCC ((uint)0x02000000) -#define BCSR4_USB_FULL_SPD ((uint)0x00040000) -#define BCSR4_USB_EN ((uint)0x00020000) - -#define BCSR5_MII2_EN 0x40 -#define BCSR5_MII2_RST 0x20 -#define BCSR5_T1_RST 0x10 -#define BCSR5_ATM155_RST 0x08 -#define BCSR5_ATM25_RST 0x04 -#define BCSR5_MII1_EN 0x02 -#define BCSR5_MII1_RST 0x01 - -/* Interrupt level assignments */ -#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ -#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ -#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */ -#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ - -/* We don't use the 8259 */ -#define NR_8259_INTS 0 - -/* CPM Ethernet through SCC3 */ -#define PA_ENET_RXD ((ushort)0x0040) -#define PA_ENET_TXD ((ushort)0x0080) -#define PE_ENET_TCLK ((uint)0x00004000) -#define PE_ENET_RCLK ((uint)0x00008000) -#define PE_ENET_TENA ((uint)0x00000010) -#define PC_ENET_CLSN ((ushort)0x0400) -#define PC_ENET_RENA ((ushort)0x0800) - -/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to - * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */ -#define SICR_ENET_MASK ((uint)0x00ff0000) -#define SICR_ENET_CLKRT ((uint)0x002c0000) - -#define BOARD_CHIP_NAME "MPC885" - -#endif /* __ASM_MPC885ADS_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c deleted file mode 100644 index ba06cc0..0000000 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ /dev/null @@ -1,476 +0,0 @@ -/*arch/ppc/platforms/mpc885ads_setup.c - * - * Platform setup for the Freescale mpc885ads board - * - * Vitaly Bordug - * - * Copyright 2005 MontaVista Software Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern unsigned char __res[]; -static void setup_smc1_ioports(struct fs_uart_platform_info*); -static void setup_smc2_ioports(struct fs_uart_platform_info*); - -static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; -static void setup_fec1_ioports(struct fs_platform_info*); -static void setup_fec2_ioports(struct fs_platform_info*); -static void setup_scc3_ioports(struct fs_platform_info*); - -static struct fs_uart_platform_info mpc885_uart_pdata[] = { - [fsid_smc1_uart] = { - .brg = 1, - .fs_no = fsid_smc1_uart, - .init_ioports = setup_smc1_ioports, - .tx_num_fifo = 4, - .tx_buf_size = 32, - .rx_num_fifo = 4, - .rx_buf_size = 32, - }, - [fsid_smc2_uart] = { - .brg = 2, - .fs_no = fsid_smc2_uart, - .init_ioports = setup_smc2_ioports, - .tx_num_fifo = 4, - .tx_buf_size = 32, - .rx_num_fifo = 4, - .rx_buf_size = 32, - }, -}; - -static struct fs_platform_info mpc8xx_enet_pdata[] = { - [fsid_fec1] = { - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, - - .use_napi = 1, - .napi_weight = 17, - - .init_ioports = setup_fec1_ioports, - - .bus_id = "0:00", - .has_phy = 1, - }, - [fsid_fec2] = { - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, - - .use_napi = 1, - .napi_weight = 17, - - .init_ioports = setup_fec2_ioports, - - .bus_id = "0:01", - .has_phy = 1, - }, - [fsid_scc3] = { - .rx_ring = 64, - .tx_ring = 8, - .rx_copybreak = 240, - - .use_napi = 1, - .napi_weight = 17, - - .init_ioports = setup_scc3_ioports, -#ifdef CONFIG_FIXED_MII_10_FDX - .bus_id = "fixed@100:1", -#else - .bus_id = "0:02", - #endif - }, -}; - -void __init board_init(void) -{ - cpm8xx_t *cp = cpmp; - unsigned int *bcsr_io; - -#ifdef CONFIG_FS_ENET - immap_t *immap = (immap_t *) IMAP_ADDR; -#endif - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR\n"); - return; - } -#ifdef CONFIG_SERIAL_CPM_SMC1 - cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ - clrbits32(bcsr_io, BCSR1_RS232EN_1); - cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); - cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); -#else - setbits32(bcsr_io,BCSR1_RS232EN_1); - cp->cp_smc[0].smc_smcmr = 0; - cp->cp_smc[0].smc_smce = 0; -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC2 - cp->cp_simode &= ~(0xe0000000 >> 1); - cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ - clrbits32(bcsr_io,BCSR1_RS232EN_2); - cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); - cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); -#else - setbits32(bcsr_io,BCSR1_RS232EN_2); - cp->cp_smc[1].smc_smcmr = 0; - cp->cp_smc[1].smc_smce = 0; -#endif - iounmap(bcsr_io); - -#ifdef CONFIG_FS_ENET - /* use MDC for MII (common) */ - setbits16(&immap->im_ioport.iop_pdpar, 0x0080); - clrbits16(&immap->im_ioport.iop_pddir, 0x0080); - bcsr_io = ioremap(BCSR5, sizeof(unsigned long)); - clrbits32(bcsr_io,BCSR5_MII1_EN); - clrbits32(bcsr_io,BCSR5_MII1_RST); -#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 - clrbits32(bcsr_io,BCSR5_MII2_EN); - clrbits32(bcsr_io,BCSR5_MII2_RST); -#endif - iounmap(bcsr_io); -#endif -} - -static void setup_fec1_ioports(struct fs_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - - /* configure FEC1 pins */ - setbits16(&immap->im_ioport.iop_papar, 0xf830); - setbits16(&immap->im_ioport.iop_padir, 0x0830); - clrbits16(&immap->im_ioport.iop_padir, 0xf000); - setbits32(&immap->im_cpm.cp_pbpar, 0x00001001); - - clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001); - setbits16(&immap->im_ioport.iop_pcpar, 0x000c); - clrbits16(&immap->im_ioport.iop_pcdir, 0x000c); - setbits32(&immap->im_cpm.cp_pepar, 0x00000003); - - setbits32(&immap->im_cpm.cp_pedir, 0x00000003); - clrbits32(&immap->im_cpm.cp_peso, 0x00000003); - clrbits32(&immap->im_cpm.cp_cptr, 0x00000100); -} - -static void setup_fec2_ioports(struct fs_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - - /* configure FEC2 pins */ - setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc); - setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc); - clrbits32(&immap->im_cpm.cp_peso, 0x000087fc); - setbits32(&immap->im_cpm.cp_peso, 0x00037800); - clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); -} - -static void setup_scc3_ioports(struct fs_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - unsigned *bcsr_io; - - bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR\n"); - return; - } - - /* Enable the PHY. - */ - clrbits32(bcsr_io+4, BCSR4_ETH10_RST); - udelay(1000); - setbits32(bcsr_io+4, BCSR4_ETH10_RST); - /* Configure port A pins for Txd and Rxd. - */ - setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); - clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); - - /* Configure port C pins to enable CLSN and RENA. - */ - clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); - clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); - setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); - - /* Configure port E for TCLK and RCLK. - */ - setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK); - clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); - clrbits32(&immap->im_cpm.cp_pedir, - PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); - clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK); - setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); - - /* Configure Serial Interface clock routing. - * First, clear all SCC bits to zero, then set the ones we want. - */ - clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); - setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); - - /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used. - */ - immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode - * by H/W setting after reset. SCC ethernet controller support only half duplex. - * This discrepancy of modes causes a lot of carrier lost errors. - */ - - /* In the original SCC enet driver the following code is placed at - the end of the initialization */ - setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); - clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA); - setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); - - setbits32(bcsr_io+4, BCSR1_ETHEN); - iounmap(bcsr_io); -} - -static int mac_count = 0; - -static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) -{ - struct fs_platform_info *fpi; - bd_t *bd = (bd_t *) __res; - char *e; - int i; - - if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) { - printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); - return; - } - - fpi = &mpc8xx_enet_pdata[fs_no]; - - switch (fs_no) { - case fsid_fec1: - fpi->init_ioports = &setup_fec1_ioports; - break; - case fsid_fec2: - fpi->init_ioports = &setup_fec2_ioports; - break; - case fsid_scc3: - fpi->init_ioports = &setup_scc3_ioports; - break; - default: - printk(KERN_WARNING "Device %s is not supported!\n", pdev->name); - return; - } - - pdev->dev.platform_data = fpi; - fpi->fs_no = fs_no; - - e = (unsigned char *)&bd->bi_enetaddr; - for (i = 0; i < 6; i++) - fpi->macaddr[i] = *e++; - - fpi->macaddr[5] += mac_count++; - -} - -static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for FEC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) - return; - mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); -} - -static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for SCC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) - return; - - mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); -} - -static void setup_smc1_ioports(struct fs_uart_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - unsigned *bcsr_io; - unsigned int iobits = 0x000000c0; - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_1); - iounmap(bcsr_io); - - setbits32(&immap->im_cpm.cp_pbpar, iobits); - clrbits32(&immap->im_cpm.cp_pbdir, iobits); - clrbits16(&immap->im_cpm.cp_pbodr, iobits); -} - -static void setup_smc2_ioports(struct fs_uart_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - unsigned *bcsr_io; - unsigned int iobits = 0x00000c00; - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_2); - iounmap(bcsr_io); - -#ifndef CONFIG_SERIAL_CPM_ALT_SMC2 - setbits32(&immap->im_cpm.cp_pbpar, iobits); - clrbits32(&immap->im_cpm.cp_pbdir, iobits); - clrbits16(&immap->im_cpm.cp_pbodr, iobits); -#else - setbits16(&immap->im_ioport.iop_papar, iobits); - clrbits16(&immap->im_ioport.iop_padir, iobits); - clrbits16(&immap->im_ioport.iop_paodr, iobits); -#endif -} - -static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev, - int idx) -{ - bd_t *bd = (bd_t *) __res; - struct fs_uart_platform_info *pinfo; - int num = ARRAY_SIZE(mpc885_uart_pdata); - - int id = fs_uart_id_smc2fsid(idx); - - /* no need to alter anything if console */ - if ((id < num) && (!pdev->dev.platform_data)) { - pinfo = &mpc885_uart_pdata[id]; - pinfo->uart_clk = bd->bi_intfreq; - pdev->dev.platform_data = pinfo; - } -} - - -static int mpc885ads_platform_notify(struct device *dev) -{ - - static const struct platform_notify_dev_map dev_map[] = { - { - .bus_id = "fsl-cpm-fec", - .rtn = mpc885ads_fixup_fec_enet_pdata, - }, - { - .bus_id = "fsl-cpm-scc", - .rtn = mpc885ads_fixup_scc_enet_pdata, - }, - { - .bus_id = "fsl-cpm-smc:uart", - .rtn = mpc885ads_fixup_uart_pdata - }, - { - .bus_id = NULL - } - }; - - platform_notify_map(dev_map,dev); - - return 0; -} - -int __init mpc885ads_init(void) -{ - struct fs_mii_fec_platform_info* fmpi; - bd_t *bd = (bd_t *) __res; - - printk(KERN_NOTICE "mpc885ads: Init\n"); - - platform_notify = mpc885ads_platform_notify; - - ppc_sys_device_initfunc(); - ppc_sys_device_disable_all(); - - ppc_sys_device_enable(MPC8xx_CPM_FEC1); - - ppc_sys_device_enable(MPC8xx_MDIO_FEC); - fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = - &mpc8xx_mdio_fec_pdata; - - fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; - - /* No PHY interrupt line here */ - fmpi->irq[0xf] = SIU_IRQ7; - -#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 - ppc_sys_device_enable(MPC8xx_CPM_SCC3); - -#endif -#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 - ppc_sys_device_enable(MPC8xx_CPM_FEC2); -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC1 - ppc_sys_device_enable(MPC8xx_CPM_SMC1); - ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC2 - ppc_sys_device_enable(MPC8xx_CPM_SMC2); - ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); -#endif - return 0; -} - -arch_initcall(mpc885ads_init); - -/* - To prevent confusion, console selection is gross: - by 0 assumed SMC1 and by 1 assumed SMC2 - */ -struct platform_device* early_uart_get_pdev(int index) -{ - bd_t *bd = (bd_t *) __res; - struct fs_uart_platform_info *pinfo; - - struct platform_device* pdev = NULL; - if(index) { /*assume SMC2 here*/ - pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; - pinfo = &mpc885_uart_pdata[1]; - } else { /*over SMC1*/ - pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; - pinfo = &mpc885_uart_pdata[0]; - } - - pinfo->uart_clk = bd->bi_intfreq; - pdev->dev.platform_data = pinfo; - ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); - return NULL; -} - diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 9caf850..dcd08d4 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -143,16 +143,6 @@ m8xx_setup_arch(void) #endif #endif -#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS) -#if defined(CONFIG_MTD_PHYSMAP) - physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize, - MPC8xxADS_BANK_WIDTH, NULL); -#ifdef CONFIG_MTD_PARTITIONS - physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num); -#endif /* CONFIG_MTD_PARTITIONS */ -#endif /* CONFIG_MTD_PHYSMAP */ -#endif - board_init(); } diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h index d3a2f2f..b9e3060 100644 --- a/include/asm-ppc/mpc8xx.h +++ b/include/asm-ppc/mpc8xx.h @@ -63,10 +63,6 @@ #include #endif -#if defined(CONFIG_MPC885ADS) -#include -#endif - /* Currently, all 8xx boards that support a processor to PCI/ISA bridge * use the same memory map. */ -- cgit v0.10.2 From fc215fe7e6f0420afee0e0987fcc311929ee662f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 21 Apr 2008 14:09:44 -0500 Subject: [POWERPC] ppc32: Fix errata for 603 CPUs 603 CPUs have the same issue that some 750 CPUs have in that they can crash in funny ways if a store from an FPU register instruction is executed on a register that has never been initialized since power on. This patch fixes it by making sure all FP registers have been properly initialized at kernel boot. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index f1ee0b3..72d1d73 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -17,7 +17,13 @@ #include _GLOBAL(__setup_cpu_603) - b setup_common_caches + mflr r4 +BEGIN_FTR_SECTION + bl __init_fpu_registers +END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE) + bl setup_common_caches + mtlr r4 + blr _GLOBAL(__setup_cpu_604) mflr r4 bl setup_common_caches -- cgit v0.10.2