From d44c3fe68cc7e435ebc06d5b6ac260a5c1b495f8 Mon Sep 17 00:00:00 2001 From: Avri Altman Date: Sat, 18 Apr 2015 22:16:42 +0300 Subject: iwlwifi: mvm: fix Tx Power firmware API The firmware doesn't relate the scan to a vif. The scan is run by a separate entity called auxiliary MAC (aka AUX MAC). This AUX MAC needs to get Tx power limitations that are not applied on a specific vif, but on the device as a whole. This can be implemented by using the minimum of all the values set by the user for all the MACs. But then we need to ignore the limitations that come from the AP or regulatory for a specific vif: a specific vif might have regulatory limitations because of the channel is works on. This limit is irrelevant for the AUX MAC. Use the new API from mac80211: the user_power_level in bss_conf to achieve this. Firmware -13.ucode has already moved to this API. Change-Id: Ifba83660f378e91b93bd46d29fe8ba35a7c168a4 Signed-off-by: Avri Altman Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index bfdf3fa..62db2e5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -244,6 +244,7 @@ enum iwl_ucode_tlv_flag { * longer than the passive one, which is essential for fragmented scan. * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR + * @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power. * @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command, * regardless of the band or the number of the probes. FW will calculate * the actual dwell time. @@ -260,6 +261,7 @@ enum iwl_ucode_tlv_api { IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8), IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = BIT(9), IWL_UCODE_TLV_API_HDC_PHASE_0 = BIT(10), + IWL_UCODE_TLV_API_TX_POWER_DEV = BIT(11), IWL_UCODE_TLV_API_BASIC_DWELL = BIT(13), IWL_UCODE_TLV_API_SCD_CFG = BIT(15), IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = BIT(16), diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index 4fc0938b..b1baa33 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -298,6 +298,40 @@ struct iwl_uapsd_misbehaving_ap_notif { } __packed; /** + * struct iwl_reduce_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @flags: (reserved for future implementation) + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in dBms. + */ +struct iwl_reduce_tx_power_cmd { + u8 flags; + u8 mac_context_id; + __le16 pwr_restriction; +} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ + +/** + * struct iwl_dev_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @set_mode: 0 - MAC tx power, 1 - device tx power + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in 1/8 dBms. + * @dev_24: device TX power restriction in 1/8 dBms + * @dev_52_low: device TX power restriction upper band - low + * @dev_52_high: device TX power restriction upper band - high + */ +struct iwl_dev_tx_power_cmd { + __le32 set_mode; + __le32 mac_context_id; + __le16 pwr_restriction; + __le16 dev_24; + __le16 dev_52_low; + __le16 dev_52_high; +} __packed; /* TX_REDUCED_POWER_API_S_VER_2 */ + +#define IWL_DEV_MAX_TX_POWER 0x7FFF + +/** * struct iwl_beacon_filter_cmd * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) * @id_and_color: MAC contex identifier diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index aab68cb..01b1da6 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -281,19 +281,6 @@ struct iwl_tx_ant_cfg_cmd { __le32 valid; } __packed; -/** - * struct iwl_reduce_tx_power_cmd - TX power reduction command - * REDUCE_TX_POWER_CMD = 0x9f - * @flags: (reserved for future implementation) - * @mac_context_id: id of the mac ctx for which we are reducing TX power. - * @pwr_restriction: TX power restriction in dBms. - */ -struct iwl_reduce_tx_power_cmd { - u8 flags; - u8 mac_context_id; - __le16 pwr_restriction; -} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ - /* * Calibration control struct. * Sent as part of the phy configuration command. diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 8455517..7c2d5ac 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1471,8 +1471,8 @@ static struct iwl_mvm_phy_ctxt *iwl_mvm_get_free_phy_ctxt(struct iwl_mvm *mvm) return NULL; } -static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, - s8 tx_power) +static int iwl_mvm_set_tx_power_old(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, s8 tx_power) { /* FW is in charge of regulatory enforcement */ struct iwl_reduce_tx_power_cmd reduce_txpwr_cmd = { @@ -1485,6 +1485,26 @@ static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, &reduce_txpwr_cmd); } +static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + s16 tx_power) +{ + struct iwl_dev_tx_power_cmd cmd = { + .set_mode = 0, + .mac_context_id = + cpu_to_le32(iwl_mvm_vif_from_mac80211(vif)->id), + .pwr_restriction = cpu_to_le16(8 * tx_power), + }; + + if (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_TX_POWER_DEV)) + return iwl_mvm_set_tx_power_old(mvm, vif, tx_power); + + if (tx_power == IWL_DEFAULT_MAX_TX_POWER) + cmd.pwr_restriction = cpu_to_le16(IWL_DEV_MAX_TX_POWER); + + return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, + sizeof(cmd), &cmd); +} + static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { -- cgit v0.10.2 From 145d90b6b3a3f00d8b66d0e118b4995b64b74fef Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 13 Apr 2015 12:05:48 +0300 Subject: iwlwifi: mvm: don't stop the FW monitor too early When the delay paramatere is provided, we need to stop the collection only after the delay has elapsed. Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index bc5eac4..9c28fe7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -494,15 +494,6 @@ int iwl_mvm_fw_dbg_collect_desc(struct iwl_mvm *mvm, mvm->fw_dump_desc = desc; - /* stop recording */ - if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { - iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); - } else { - iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); - /* wait before we collect the data till the DBGC stop */ - udelay(100); - } - queue_delayed_work(system_wq, &mvm->fw_dump_wk, delay); return 0; diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index a08b03d..1c66297 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -865,6 +865,16 @@ static void iwl_mvm_fw_error_dump_wk(struct work_struct *work) return; mutex_lock(&mvm->mutex); + + /* stop recording */ + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); + } else { + iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); + /* wait before we collect the data till the DBGC stop */ + udelay(100); + } + iwl_mvm_fw_error_dump(mvm); /* start recording again if the firmware is not crashed */ -- cgit v0.10.2 From 1083fd7391e989be52022f0f338e9dadc048b063 Mon Sep 17 00:00:00 2001 From: Avraham Stern Date: Tue, 31 Mar 2015 16:14:41 +0300 Subject: iwlwifi: mvm: fix scan iteration complete notification handling Scan iteration complete notification handling uses the wrong FW API version (version 2 instead of version 3). Fix that by removing version 2 API which is no longer used, and using only the updated version. Signed-off-by: Avraham Stern Reviewed-by: David Spinadel Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 4f81dcf..d6cced4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -122,46 +122,6 @@ enum iwl_scan_complete_status { SCAN_COMP_STATUS_ERR_ALLOC_TE = 0x0C, }; -/** - * struct iwl_scan_results_notif - scan results for one channel - * ( SCAN_RESULTS_NOTIFICATION = 0x83 ) - * @channel: which channel the results are from - * @band: 0 for 5.2 GHz, 1 for 2.4 GHz - * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request - * @num_probe_not_sent: # of request that weren't sent due to not enough time - * @duration: duration spent in channel, in usecs - * @statistics: statistics gathered for this channel - */ -struct iwl_scan_results_notif { - u8 channel; - u8 band; - u8 probe_status; - u8 num_probe_not_sent; - __le32 duration; - __le32 statistics[SCAN_RESULTS_STATISTICS]; -} __packed; /* SCAN_RESULT_NTF_API_S_VER_2 */ - -/** - * struct iwl_scan_complete_notif - notifies end of scanning (all channels) - * ( SCAN_COMPLETE_NOTIFICATION = 0x84 ) - * @scanned_channels: number of channels scanned (and number of valid results) - * @status: one of SCAN_COMP_STATUS_* - * @bt_status: BT on/off status - * @last_channel: last channel that was scanned - * @tsf_low: TSF timer (lower half) in usecs - * @tsf_high: TSF timer (higher half) in usecs - * @results: array of scan results, only "scanned_channels" of them are valid - */ -struct iwl_scan_complete_notif { - u8 scanned_channels; - u8 status; - u8 bt_status; - u8 last_channel; - __le32 tsf_low; - __le32 tsf_high; - struct iwl_scan_results_notif results[]; -} __packed; /* SCAN_COMPLETE_NTF_API_S_VER_2 */ - /* scan offload */ #define IWL_SCAN_MAX_BLACKLIST_LEN 64 #define IWL_SCAN_SHORT_BLACKLIST_LEN 16 @@ -554,7 +514,7 @@ struct iwl_scan_req_unified_lmac { } __packed; /** - * struct iwl_lmac_scan_results_notif - scan results for one channel - + * struct iwl_scan_results_notif - scan results for one channel - * SCAN_RESULT_NTF_API_S_VER_3 * @channel: which channel the results are from * @band: 0 for 5.2 GHz, 1 for 2.4 GHz @@ -562,7 +522,7 @@ struct iwl_scan_req_unified_lmac { * @num_probe_not_sent: # of request that weren't sent due to not enough time * @duration: duration spent in channel, in usecs */ -struct iwl_lmac_scan_results_notif { +struct iwl_scan_results_notif { u8 channel; u8 band; u8 probe_status; diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 74e1c86..1075a21 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -319,7 +319,7 @@ int iwl_mvm_rx_scan_offload_iter_complete_notif(struct iwl_mvm *mvm, struct iwl_device_cmd *cmd) { struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scan_complete_notif *notif = (void *)pkt->data; + struct iwl_lmac_scan_complete_notif *notif = (void *)pkt->data; IWL_DEBUG_SCAN(mvm, "Scan offload iteration complete: status=0x%x scanned channels=%d\n", -- cgit v0.10.2 From 8047cc0c584844817fbf3bf57cb18c1f762a7136 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Thu, 26 Mar 2015 13:15:03 +0200 Subject: iwlwifi: mvm: Avoid signal based decisions if ave beacon RSSI is 0 If for some reason statistics notification received from the firmware reports 0 in average beacon RSSI value, then skip it and avoid signal based decisions. Signed-off-by: Alexander Bondar Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 78ec7db..d6314dd 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -478,6 +478,11 @@ static void iwl_mvm_stat_iterator(void *_data, u8 *mac, if (vif->type != NL80211_IFTYPE_STATION) return; + if (sig == 0) { + IWL_DEBUG_RX(mvm, "RSSI is 0 - skip signal based decision\n"); + return; + } + mvmvif->bf_data.ave_beacon_signal = sig; /* BT Coex */ -- cgit v0.10.2 From 553452e5ffc0ed13214a287549627d02d9d7fbdc Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Thu, 16 Apr 2015 17:21:12 +0300 Subject: iwlwifi: pcie: prevent using unmapped memory in fw monitor In the case of a DMA mapping error on the last iteration of the loop of the allocation of memory of the FW monitor we indeed free the pages, but don't NULL out the page variable thus allowing for the possibility of setting the FW monitor variables with invalid data to use. Fixes: c2d202017da1 ("iwlwifi: pcie: add firmware monitor capabilities") Signed-off-by: Liad Kaufman Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 2de8fbf..6debb0c 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -5,8 +5,8 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2007 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -31,8 +31,8 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2005 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -104,7 +104,7 @@ static void iwl_pcie_free_fw_monitor(struct iwl_trans *trans) static void iwl_pcie_alloc_fw_monitor(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct page *page; + struct page *page = NULL; dma_addr_t phys; u32 size; u8 power; @@ -131,6 +131,7 @@ static void iwl_pcie_alloc_fw_monitor(struct iwl_trans *trans) DMA_FROM_DEVICE); if (dma_mapping_error(trans->dev, phys)) { __free_pages(page, order); + page = NULL; continue; } IWL_INFO(trans, -- cgit v0.10.2 From 414b7e3b9ce8b0577f613e656fdbc36b34b444dd Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 24 Apr 2015 11:03:37 -0500 Subject: rtlwifi: rtl8192cu: Fix kernel deadlock The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by: Bernhard Wiedemann Tested-by: Bernhard Wiedemann Signed-off-by: Larry Finger Cc: Stable Cc: Bernhard Wiedemann Cc: Takashi Iwai Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index f0188c8..2721cf8 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -126,7 +126,7 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request, do { status = usb_control_msg(udev, pipe, request, reqtype, value, - index, pdata, len, 0); /*max. timeout*/ + index, pdata, len, 1000); if (status < 0) { /* firmware download is checksumed, don't retry */ if ((value >= FW_8192C_START_ADDRESS && -- cgit v0.10.2 From 8d193ca26cc28019e760b77830295a0c349d90dc Mon Sep 17 00:00:00 2001 From: Eran Harary Date: Mon, 27 Apr 2015 10:29:31 +0300 Subject: iwlwifi: mvm: don't power off the device between INIT and OPER firmwares Our device needs two different firmwares: the INIT firmware and the operational (OPER) firmware. The first one is run when the driver loads and it returns calibrations results as well as the NVM. The second one implements the WiFi protocol. If the wlan interface is not brought up, the device is put to low power state: no firmware will be running. When the interface is brought up, we would run the OPER firmware only and reuse the results of the run of the INIT firmware when the driver was loaded. This is changing with this patch. We now run the INIT firmware every time mac80211 calls start(). The penalty for that is minimal since the INIT firwmare run fast. I now also avoid to power down the device between the INIT and OPER firmware on certains buses. The motivation for this change is that there are components on the device (MFUART) that are triggered by the INIT firmware and need the device to be powered up in order to keep running. Powering the device down between the INIT and OPER firmware would stop these components and prevent them from running again since they are triggered by the INIT firmware only. The new flow allows this and also allows to trigger these components again when the interface is brought up after it has been brought down. Signed-off-by: Eran Harary Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 6dfed12..56254a8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -421,8 +421,9 @@ struct iwl_trans_txq_scd_cfg { * * All the handlers MUST be implemented * - * @start_hw: starts the HW- from that point on, the HW can send interrupts - * May sleep + * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken + * out of a low power state. From that point on, the HW can send + * interrupts. May sleep. * @op_mode_leave: Turn off the HW RF kill indication if on * May sleep * @start_fw: allocates and inits all the resources for the transport @@ -432,10 +433,11 @@ struct iwl_trans_txq_scd_cfg { * the SCD base address in SRAM, then provide it here, or 0 otherwise. * May sleep * @stop_device: stops the whole device (embedded CPU put to reset) and stops - * the HW. From that point on, the HW will be in low power but will still - * issue interrupt if the HW RF kill is triggered. This callback must do - * the right thing and not crash even if start_hw() was called but not - * start_fw(). May sleep + * the HW. If low_power is true, the NIC will be put in low power state. + * From that point on, the HW will be stopped but will still issue an + * interrupt if the HW RF kill switch is triggered. + * This callback must do the right thing and not crash even if %start_hw() + * was called but not &start_fw(). May sleep. * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. @@ -491,14 +493,14 @@ struct iwl_trans_txq_scd_cfg { */ struct iwl_trans_ops { - int (*start_hw)(struct iwl_trans *iwl_trans); + int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power); void (*op_mode_leave)(struct iwl_trans *iwl_trans); int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill); int (*update_sf)(struct iwl_trans *trans, struct iwl_sf_region *st_fwrd_space); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); - void (*stop_device)(struct iwl_trans *trans); + void (*stop_device)(struct iwl_trans *trans, bool low_power); void (*d3_suspend)(struct iwl_trans *trans, bool test); int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status, @@ -652,11 +654,16 @@ static inline void iwl_trans_configure(struct iwl_trans *trans, trans->ops->configure(trans, trans_cfg); } -static inline int iwl_trans_start_hw(struct iwl_trans *trans) +static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power) { might_sleep(); - return trans->ops->start_hw(trans); + return trans->ops->start_hw(trans, low_power); +} + +static inline int iwl_trans_start_hw(struct iwl_trans *trans) +{ + return trans->ops->start_hw(trans, true); } static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans) @@ -703,15 +710,21 @@ static inline int iwl_trans_update_sf(struct iwl_trans *trans, return 0; } -static inline void iwl_trans_stop_device(struct iwl_trans *trans) +static inline void _iwl_trans_stop_device(struct iwl_trans *trans, + bool low_power) { might_sleep(); - trans->ops->stop_device(trans); + trans->ops->stop_device(trans, low_power); trans->state = IWL_TRANS_NO_FW; } +static inline void iwl_trans_stop_device(struct iwl_trans *trans) +{ + _iwl_trans_stop_device(trans, true); +} + static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test) { might_sleep(); diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index 9c28fe7..df86963 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -322,7 +322,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) lockdep_assert_held(&mvm->mutex); - if (WARN_ON_ONCE(mvm->init_ucode_complete || mvm->calibrating)) + if (WARN_ON_ONCE(mvm->calibrating)) return 0; iwl_init_notification_wait(&mvm->notif_wait, @@ -396,8 +396,6 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) */ ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait, MVM_UCODE_CALIB_TIMEOUT); - if (!ret) - mvm->init_ucode_complete = true; if (ret && iwl_mvm_is_radio_killed(mvm)) { IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n"); @@ -649,25 +647,24 @@ int iwl_mvm_up(struct iwl_mvm *mvm) * module loading, load init ucode now * (for example, if we were in RFKILL) */ - if (!mvm->init_ucode_complete) { - ret = iwl_run_init_mvm_ucode(mvm, false); - if (ret && !iwlmvm_mod_params.init_dbg) { - IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); - /* this can't happen */ - if (WARN_ON(ret > 0)) - ret = -ERFKILL; - goto error; - } - if (!iwlmvm_mod_params.init_dbg) { - /* - * should stop and start HW since that INIT - * image just loaded - */ - iwl_trans_stop_device(mvm->trans); - ret = iwl_trans_start_hw(mvm->trans); - if (ret) - return ret; - } + ret = iwl_run_init_mvm_ucode(mvm, false); + if (ret && !iwlmvm_mod_params.init_dbg) { + IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); + /* this can't happen */ + if (WARN_ON(ret > 0)) + ret = -ERFKILL; + goto error; + } + if (!iwlmvm_mod_params.init_dbg) { + /* + * Stop and start the transport without entering low power + * mode. This will save the state of other components on the + * device that are triggered by the INIT firwmare (MFUART). + */ + _iwl_trans_stop_device(mvm->trans, false); + _iwl_trans_start_hw(mvm->trans, false); + if (ret) + return ret; } if (iwlmvm_mod_params.init_dbg) diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index d5522a1..cf70f68 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -603,7 +603,6 @@ struct iwl_mvm { enum iwl_ucode_type cur_ucode; bool ucode_loaded; - bool init_ucode_complete; bool calibrating; u32 error_event_table; u32 log_event_table; diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 6debb0c..47bbf57 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1021,7 +1021,7 @@ static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr) iwl_pcie_tx_start(trans, scd_addr); } -static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) +static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); bool hw_rfkill, was_hw_rfkill; @@ -1116,7 +1116,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) void iwl_trans_pcie_rf_kill(struct iwl_trans *trans, bool state) { if (iwl_op_mode_hw_rf_kill(trans->op_mode, state)) - iwl_trans_pcie_stop_device(trans); + iwl_trans_pcie_stop_device(trans, true); } static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans, bool test) @@ -1201,7 +1201,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, return 0; } -static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) +static int iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power) { bool hw_rfkill; int err; -- cgit v0.10.2 From 6bbd5521edd3896190f5c0581f059b7c93daf670 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 28 Apr 2015 15:00:23 +0300 Subject: iwlwifi: mvm: fix typo in CONFIG option I forgot to rename the CPTCFG_ prefix... Fixes: 484b3d13b4ac ("iwlwifi: mvm: add debugfs entry with the number of net-detect scans") Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index a6c48c7..1b1b2bf 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1726,7 +1726,7 @@ iwl_mvm_netdetect_query_results(struct iwl_mvm *mvm, results->matched_profiles = le32_to_cpu(query->matched_profiles); memcpy(results->matches, query->matches, sizeof(results->matches)); -#ifdef CPTCFG_IWLWIFI_DEBUGFS +#ifdef CONFIG_IWLWIFI_DEBUGFS mvm->last_netdetect_scans = le32_to_cpu(query->n_scans_done); #endif -- cgit v0.10.2 From e7afe89fd67d40a7f5fff8130c5f925d99a94b1f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2015 09:21:46 +0200 Subject: iwlwifi: mvm: force quota update update after FW restart During firmware restart, the quota command isn't calculated multiple times, but after the firmware restart it has to be sent, so force it. Otherwise the firmware crashes. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 7c2d5ac..40265b9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1322,7 +1322,7 @@ static void iwl_mvm_restart_complete(struct iwl_mvm *mvm) clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); iwl_mvm_d0i3_enable_tx(mvm, NULL); - ret = iwl_mvm_update_quotas(mvm, false, NULL); + ret = iwl_mvm_update_quotas(mvm, true, NULL); if (ret) IWL_ERR(mvm, "Failed to update quotas after restart (%d)\n", ret); -- cgit v0.10.2 From f673821864899153142365aca888435815ac93f0 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Wed, 8 Apr 2015 20:51:57 +0200 Subject: ath9k: fix per-packet tx power configuration Do not use ieee80211_vif pointer in ath_get_rate_txpower() since it has been overwritten by setup_frame_info() and it will result in a corrupted tx power configuration. Set per-packet tx power in setup_frame_info() according to current vif tx power. Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 0acd079..3ad79bb 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1103,28 +1103,14 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf, struct sk_buff *skb; struct ath_frame_info *fi; struct ieee80211_tx_info *info; - struct ieee80211_vif *vif; struct ath_hw *ah = sc->sc_ah; if (sc->tx99_state || !ah->tpc_enabled) return MAX_RATE_POWER; skb = bf->bf_mpdu; - info = IEEE80211_SKB_CB(skb); - vif = info->control.vif; - - if (!vif) { - max_power = sc->cur_chan->cur_txpower; - goto out; - } - - if (vif->bss_conf.txpower_type != NL80211_TX_POWER_LIMITED) { - max_power = min_t(u8, sc->cur_chan->cur_txpower, - 2 * vif->bss_conf.txpower); - goto out; - } - fi = get_frame_info(skb); + info = IEEE80211_SKB_CB(skb); if (!AR_SREV_9300_20_OR_LATER(ah)) { int txpower = fi->tx_power; @@ -1161,25 +1147,26 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf, txpower -= 2; txpower = max(txpower, 0); - max_power = min_t(u8, ah->tx_power[rateidx], - 2 * vif->bss_conf.txpower); - max_power = min_t(u8, max_power, txpower); + max_power = min_t(u8, ah->tx_power[rateidx], txpower); + + /* XXX: clamp minimum TX power at 1 for AR9160 since if + * max_power is set to 0, frames are transmitted at max + * TX power + */ + if (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) + max_power = 1; } else if (!bf->bf_state.bfs_paprd) { if (rateidx < 8 && (info->flags & IEEE80211_TX_CTL_STBC)) max_power = min_t(u8, ah->tx_power_stbc[rateidx], - 2 * vif->bss_conf.txpower); + fi->tx_power); else max_power = min_t(u8, ah->tx_power[rateidx], - 2 * vif->bss_conf.txpower); - max_power = min(max_power, fi->tx_power); + fi->tx_power); } else { max_power = ah->paprd_training_power; } -out: - /* XXX: clamp minimum TX power at 1 for AR9160 since if max_power - * is set to 0, frames are transmitted at max TX power - */ - return (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) ? 1 : max_power; + + return max_power; } static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, @@ -2129,6 +2116,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct ath_node *an = NULL; enum ath9k_key_type keytype; bool short_preamble = false; + u8 txpower; /* * We check if Short Preamble is needed for the CTS rate by @@ -2145,6 +2133,16 @@ static void setup_frame_info(struct ieee80211_hw *hw, if (sta) an = (struct ath_node *) sta->drv_priv; + if (tx_info->control.vif) { + struct ieee80211_vif *vif = tx_info->control.vif; + + txpower = 2 * vif->bss_conf.txpower; + } else { + struct ath_softc *sc = hw->priv; + + txpower = sc->cur_chan->cur_txpower; + } + memset(fi, 0, sizeof(*fi)); fi->txq = -1; if (hw_key) @@ -2155,7 +2153,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; - fi->tx_power = MAX_RATE_POWER; + fi->tx_power = txpower; if (!rate) return; -- cgit v0.10.2