From 2934167dd02b4fb5f6c57b36c92b3af23e8bad9f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 Nov 2015 17:32:19 +0100 Subject: ARM: realview: enable multiplatform All obstacles are out of the way by now, so we can finally move realview to multiplatform. Signed-off-by: Arnd Bergmann Cc: Russell King [Rebased Kconfig, fixed if $(X) to if X in Makefile] Signed-off-by: Linus Walleij diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 29915c7..242dc40 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -343,20 +343,6 @@ config ARM_SINGLE_ARMV7M select SPARSE_IRQ select USE_OF -config ARCH_REALVIEW - bool "ARM Ltd. RealView family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_TIMER_SP804 - select COMMON_CLK - select COMMON_CLK_VERSATILE - select GENERIC_CLOCKEVENTS - select GPIO_PL061 if GPIOLIB - select ICST - select PLAT_VERSATILE - select PLAT_VERSATILE_SCHED_CLOCK - help - This enables support for ARM Ltd RealView boards. config ARCH_VERSATILE bool "ARM Ltd. Versatile family" diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 7316fff..9e01e42 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,5 +1,16 @@ -menu "RealView platform type" - depends on ARCH_REALVIEW +menuconfig ARCH_REALVIEW + bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 + select ARM_AMBA + select ARM_TIMER_SP804 + select COMMON_CLK_VERSATILE + select GPIO_PL061 if GPIOLIB + select ICST + select PLAT_VERSATILE + select PLAT_VERSATILE_SCHED_CLOCK + help + This enables support for ARM Ltd RealView boards. + +if ARCH_REALVIEW config REALVIEW_DT bool "Support RealView(R) Device Tree based boot" @@ -7,6 +18,7 @@ config REALVIEW_DT select CLK_SP810 select HAVE_SMP select ICST + select MACH_REALVIEW_EB if ARCH_MULTI_V5 select MFD_SYSCON select POWER_RESET select POWER_RESET_VERSATILE @@ -21,14 +33,32 @@ config REALVIEW_DT config MACH_REALVIEW_EB bool "Support RealView(R) Emulation Baseboard" select ARM_GIC + select CPU_ARM926T if ARCH_MULTI_V5 help Include support for the ARM(R) RealView(R) Emulation Baseboard - platform. + platform. On an ARMv5 kernel, this will include support for + the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least + one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore + core tile options should be enabled. + +config REALVIEW_EB_ARM1136 + bool "Support ARM1136J(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + select CPU_V6 + help + Enable support for the ARM1136 tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_ARM1176 + bool "Support ARM1176JZ(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + help + Enable support for the ARM1176 tile fitted to the + Realview(R) Emulation Baseboard platform. config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" - depends on MACH_REALVIEW_EB - select CPU_V7 + depends on MACH_REALVIEW_EB && ARCH_MULTI_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_SMP @@ -39,8 +69,7 @@ config REALVIEW_EB_A9MP config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore Tile" - depends on MACH_REALVIEW_EB - select CPU_V6K + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_SMP @@ -51,7 +80,7 @@ config REALVIEW_EB_ARM11MP config REALVIEW_EB_ARM11MP_REVB bool "Support ARM11MPCore RevB Tile" - depends on REALVIEW_EB_ARM11MP + depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6 help Enable support for the ARM11MPCore Revision B tile on the Realview(R) Emulation Baseboard platform. Since there are device @@ -60,8 +89,8 @@ config REALVIEW_EB_ARM11MP_REVB config MACH_REALVIEW_PB11MP bool "Support RealView(R) Platform Baseboard for ARM11MPCore" + depends on ARCH_MULTI_V6 select ARM_GIC - select CPU_V6K select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM @@ -75,6 +104,7 @@ config MACH_REALVIEW_PB11MP # ARMv6 CPU without K extensions, but does have the new exclusive ops config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" + depends on ARCH_MULTI_V6 select ARM_GIC select CPU_V6 select HAVE_TCM @@ -94,8 +124,8 @@ config REALVIEW_PB1176_SECURE_FLASH config MACH_REALVIEW_PBA8 bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" + depends on ARCH_MULTI_V7 select ARM_GIC - select CPU_V7 select HAVE_PATA_PLATFORM help Include support for the ARM(R) RealView Platform Baseboard for @@ -103,7 +133,8 @@ config MACH_REALVIEW_PBA8 support for PCI-E and Compact Flash. config MACH_REALVIEW_PBX - bool "Support RealView(R) Platform Baseboard Explore" + bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9" + depends on ARCH_MULTI_V7 select ARM_GIC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -127,4 +158,4 @@ config REALVIEW_HIGH_PHYS_OFFSET offset. On the PBX board, disabling this option allows 1GB of RAM to be used with HIGHMEM. -endmenu +endif diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index a46fa69..a4392f5 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -1,13 +1,18 @@ # # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ + -I$(srctree)/arch/arm/plat-versatile/include + -obj-y := core.o obj-$(CONFIG_REALVIEW_DT) += realview-dt.o platsmp-dt.o +obj-y := core.o +ifdef CONFIG_ATAGS obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o +endif obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -- cgit v0.10.2 From abc466951aeb16fb00d207052c881dcc597acb29 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 Nov 2015 17:32:20 +0100 Subject: ARM: integrator: use explicit core module options For consistency with the other platforms, this remove the CPU selection logic in mm/Kconfig that was only used by integrator, and adds specific options for each available core tile and core module, which in turn select the correct CPUs. This is consistent with the new way that we do it for realview and all other platforms. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 02d0834..e936cf4 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -1,4 +1,4 @@ -config ARCH_INTEGRATOR +menuconfig ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6) select ARM_AMBA select ARM_PATCH_PHYS_VIRT if MMU @@ -23,8 +23,6 @@ config ARCH_INTEGRATOR if ARCH_INTEGRATOR -menu "Integrator Options" - config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select CLKSRC_MMIO @@ -36,19 +34,6 @@ config ARCH_INTEGRATOR_AP Include support for the ARM(R) Integrator/AP and Integrator/PP2 platforms. -config ARCH_INTEGRATOR_CP - bool "Support Integrator/CP platform" - select ARCH_CINTEGRATOR - select ARM_TIMER_SP804 - select SERIAL_AMBA_PL011 if TTY - select SERIAL_AMBA_PL011_CONSOLE if TTY - select SOC_BUS - help - Include support for the ARM(R) Integrator CP platform. - -config ARCH_CINTEGRATOR - bool - config INTEGRATOR_IMPD1 bool "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP @@ -63,6 +48,119 @@ config INTEGRATOR_IMPD1 To compile this driver as a module, choose M here: the module will be called impd1. -endmenu +config INTEGRATOR_CM7TDMI + bool "Integrator/CM7TDMI core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4 && !MMU + select CPU_ARM7TDMI + +config INTEGRATOR_CM720T + bool "Integrator/CM720T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM720T + +config INTEGRATOR_CM740T + bool "Integrator/CM740T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T && !MMU + select CPU_ARM740T + +config INTEGRATOR_CM920T + bool "Integrator/CM920T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM920T + +config INTEGRATOR_CM922T_XA10 + bool "Integrator/CM922T-XA10 core module" + depends on ARCH_MULTI_V4T + depends on ARCH_INTEGRATOR_AP + select CPU_ARM922T + +config INTEGRATOR_CM926EJS + bool "Integrator/CM926EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CM940T + bool "Integrator/CM940T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T && !MMU + select CPU_ARM940T + +config INTEGRATOR_CM946ES + bool "Integrator/CM946E-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 && !MMU + select CPU_ARM946E + +config INTEGRATOR_CM966ES + bool "Integrator/CM966E-S core module" + depends on ARCH_INTEGRATOR_AP + depends on BROKEN # no kernel support + +config INTEGRATOR_CM10200E_REV0 + bool "Integrator/CM10200E rev.0 core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020 + +config INTEGRATOR_CM10200E + bool "Integrator/CM10200E core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020E + +config INTEGRATOR_CM10220E + bool "Integrator/CM10220E core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1022 + +config INTEGRATOR_CM1026EJS + bool "Integrator/CM1026EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1026 + +config INTEGRATOR_CM1136JFS + bool "Integrator/CM1136JF-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_INTEGRATOR_CP + bool "Support Integrator/CP platform" + depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6) + select ARM_TIMER_SP804 + select SERIAL_AMBA_PL011 if TTY + select SERIAL_AMBA_PL011_CONSOLE if TTY + select SOC_BUS + help + Include support for the ARM(R) Integrator CP platform. + +config INTEGRATOR_CT7T + bool "Integrator/CT7TD (ARM7TDMI) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V4T && !MMU + select CPU_ARM7TDMI + +config INTEGRATOR_CT926 + bool "Integrator/CT926 (ARM926EJ-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CTB36 + bool "Integrator/CTB36 (ARM1136JF-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_CINTEGRATOR + depends on ARCH_INTEGRATOR_CP + def_bool y endif -- cgit v0.10.2 From 17d44d7d87582366b8d508139c7307bab4103c6e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 Nov 2015 17:32:21 +0100 Subject: ARM: no longer make CPU targets visible separately Now that realview and integrator always select the correct CPU type themselves based on the core tiles, there is no need to still have them user-visible in arch/arm/mm/Kconfig. The ARM925T symbol has been selected by the only user for many years, so that can be removed along with the realview and integrator specific ones. This also solves randconfig build problems on realview. Signed-off-by: Arnd Bergmann Cc: Russell King Signed-off-by: Linus Walleij diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 76f65f2..549f6d3 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -21,7 +21,7 @@ config CPU_ARM7TDMI # ARM720T config CPU_ARM720T - bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool select CPU_32v4T select CPU_ABRT_LV4T select CPU_CACHE_V4 @@ -39,7 +39,7 @@ config CPU_ARM720T # ARM740T config CPU_ARM740T - bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T @@ -71,7 +71,7 @@ config CPU_ARM9TDMI # ARM920T config CPU_ARM920T - bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -89,7 +89,7 @@ config CPU_ARM920T # ARM922T config CPU_ARM922T - bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -108,7 +108,7 @@ config CPU_ARM922T # ARM925T config CPU_ARM925T - bool "Support ARM925T processor" if ARCH_OMAP1 + bool select CPU_32v4T select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -127,7 +127,7 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T - bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB) + bool select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT @@ -163,7 +163,7 @@ config CPU_FA526 # ARM940T config CPU_ARM940T - bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR) + bool depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU @@ -181,7 +181,7 @@ config CPU_ARM940T # ARM946E-S config CPU_ARM946E - bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool depends on !MMU select CPU_32v5 select CPU_ABRT_NOMMU @@ -198,7 +198,7 @@ config CPU_ARM946E # ARM1020 - needs validating config CPU_ARM1020 - bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool select CPU_32v5 select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -216,7 +216,7 @@ config CPU_ARM1020 # ARM1020E - needs validating config CPU_ARM1020E - bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool depends on n select CPU_32v5 select CPU_ABRT_EV4T @@ -229,7 +229,7 @@ config CPU_ARM1020E # ARM1022E config CPU_ARM1022 - bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool select CPU_32v5 select CPU_ABRT_EV4T select CPU_CACHE_VIVT @@ -247,7 +247,7 @@ config CPU_ARM1022 # ARM1026EJ-S config CPU_ARM1026 - bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR) + bool select CPU_32v5 select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10 select CPU_CACHE_VIVT @@ -358,7 +358,7 @@ config CPU_PJ4B # ARMv6 config CPU_V6 - bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX) + bool select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 @@ -371,7 +371,7 @@ config CPU_V6 # ARMv6k config CPU_V6K - bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX) + bool select CPU_32v6 select CPU_32v6K select CPU_ABRT_EV6 @@ -385,7 +385,7 @@ config CPU_V6K # ARMv7 config CPU_V7 - bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX) + bool select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 -- cgit v0.10.2 From 6d407a6eac8378c45a09a3c071d6f1ed31d938e9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 Nov 2015 17:32:22 +0100 Subject: ARM: realview: make all header files local Nothing includes these files any more, so we can simply move them from arch/arm/mach-realview/include/mach/ to arch/arm/mach-realview. Signed-off-by: Arnd Bergmann [Two fixes added to make everything compile] Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-realview/board-eb.h b/arch/arm/mach-realview/board-eb.h new file mode 100644 index 0000000..ac9c98f --- /dev/null +++ b/arch/arm/mach-realview/board-eb.h @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-realview/include/mach/board-eb.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_EB_H +#define __ASM_ARCH_BOARD_EB_H + +#include "platform.h" + +/* + * RealView EB + ARM11MPCore peripheral addresses + */ +#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */ + +#define REALVIEW_EB_FLASH_BASE 0x40000000 +#define REALVIEW_EB_FLASH_SIZE SZ_64M +#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ + +#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x10100000 +#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ +#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ +#else +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 +#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ +#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ +#endif + +#define REALVIEW_EB11MP_PRIV_MEM_SIZE SZ_8K +#define REALVIEW_EB11MP_PRIV_MEM_OFF(x) (REALVIEW_EB11MP_PRIV_MEM_BASE + (x)) + +#define REALVIEW_EB11MP_SCU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0) /* SCU registers */ +#define REALVIEW_EB11MP_GIC_CPU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100) /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB11MP_TWD_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600) +#define REALVIEW_EB11MP_GIC_DIST_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000) /* Generic interrupt controller distributor */ + +/* + * Core tile identification (REALVIEW_SYS_PROCID) + */ +#define REALVIEW_EB_PROC_MASK 0xFF000000 +#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000 +#define REALVIEW_EB_PROC_ARM9 0x02000000 +#define REALVIEW_EB_PROC_ARM11 0x04000000 +#define REALVIEW_EB_PROC_ARM11MP 0x06000000 +#define REALVIEW_EB_PROC_A9MP 0x0C000000 + +#define check_eb_proc(proc_type) \ + ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ + == proc_type) + +#ifdef CONFIG_REALVIEW_EB_ARM11MP +#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP) +#else +#define core_tile_eb11mp() 0 +#endif + +#ifdef CONFIG_REALVIEW_EB_A9MP +#define core_tile_a9mp() check_eb_proc(REALVIEW_EB_PROC_A9MP) +#else +#define core_tile_a9mp() 0 +#endif + +#define machine_is_realview_eb_mp() \ + (machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp())) + +#endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/arch/arm/mach-realview/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h new file mode 100644 index 0000000..836433d --- /dev/null +++ b/arch/arm/mach-realview/board-pb1176.h @@ -0,0 +1,83 @@ +/* + * arch/arm/mach-realview/include/mach/board-pb1176.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PB1176_H +#define __ASM_ARCH_BOARD_PB1176_H + +#include "platform.h" + +/* + * Peripheral addresses + */ +#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */ +#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ +#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ +#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ +#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ +#define REALVIEW_PB1176_FLASH_BASE 0x30000000 +#define REALVIEW_PB1176_FLASH_SIZE SZ_64M +#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */ +#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M + +#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ +#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ +#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */ +#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */ +#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */ +#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */ +#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */ +#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */ +#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */ +#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */ +#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */ +#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */ +#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */ +#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */ + +/* + * PCI regions + */ +#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */ +#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */ +#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */ +#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */ +#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */ +#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */ + +#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */ + +#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ +#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ +#define REALVIEW_DC1176_ROM_BASE 0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */ +#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ +#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ +#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ + +/* + * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset + */ +#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100 + +#endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h new file mode 100644 index 0000000..e3a758b --- /dev/null +++ b/arch/arm/mach-realview/board-pb11mp.h @@ -0,0 +1,98 @@ +/* + * arch/arm/mach-realview/include/mach/board-pb11mp.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PB11MP_H +#define __ASM_ARCH_BOARD_PB11MP_H + +#include "platform.h" + +/* + * Peripheral addresses + */ +#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */ +#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ +#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000 +#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M +#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000 +#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M +#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74 + +/* + * PB11MPCore PCI regions + */ +#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Testchip peripheral and fpga gic regions + */ +#define REALVIEW_TC11MP_PRIV_MEM_BASE 0x1F000000 +#define REALVIEW_TC11MP_PRIV_MEM_SIZE SZ_8K +#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ +#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ +#define REALVIEW_TC11MP_TWD_BASE 0x1F000600 +#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ +#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ + + /* + * Values for REALVIEW_SYS_RESET_CTRL + */ +#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR 0x01 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT 0x02 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET 0x03 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET 0x04 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR 0x05 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC 0x06 + +#define REALVIEW_PB11MP_SYS_CTRL_LED (1 << 0) + +#endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/board-pba8.h b/arch/arm/mach-realview/board-pba8.h new file mode 100644 index 0000000..84232fe --- /dev/null +++ b/arch/arm/mach-realview/board-pba8.h @@ -0,0 +1,73 @@ +/* + * include/asm-arm/arch-realview/board-pba8.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PBA8_H +#define __ASM_ARCH_BOARD_PBA8_H + +#include "platform.h" + +/* + * Peripheral addresses + */ +#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PBA8_FLASH0_BASE 0x40000000 +#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M +#define REALVIEW_PBA8_FLASH1_BASE 0x44000000 +#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M +#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74 + +/* + * PBA8 PCI regions + */ +#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +#endif /* __ASM_ARCH_BOARD_PBA8_H */ diff --git a/arch/arm/mach-realview/board-pbx.h b/arch/arm/mach-realview/board-pbx.h new file mode 100644 index 0000000..3dab54f --- /dev/null +++ b/arch/arm/mach-realview/board-pbx.h @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-realview/include/mach/board-pbx.h + * + * Copyright (C) 2009 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_BOARD_PBX_H +#define __ASM_ARCH_BOARD_PBX_H + +#include "platform.h" + +/* + * Peripheral addresses + */ +#define REALVIEW_PBX_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PBX_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PBX_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PBX_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PBX_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PBX_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PBX_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PBX_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PBX_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PBX_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PBX_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PBX_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PBX_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PBX_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PBX_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PBX_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PBX_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PBX_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PBX_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PBX_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PBX_FLASH0_BASE 0x40000000 +#define REALVIEW_PBX_FLASH0_SIZE SZ_64M +#define REALVIEW_PBX_FLASH1_BASE 0x44000000 +#define REALVIEW_PBX_FLASH1_SIZE SZ_64M +#define REALVIEW_PBX_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PBX_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PBX_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PBX_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PBX_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PBX_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +/* + * Tile-specific addresses + */ +#define REALVIEW_PBX_TILE_SCU_BASE 0x1F000000 /* SCU registers */ +#define REALVIEW_PBX_TILE_GIC_CPU_BASE 0x1F000100 /* Private Generic interrupt controller CPU interface */ +#define REALVIEW_PBX_TILE_TWD_BASE 0x1F000600 +#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE 0x1F000700 +#define REALVIEW_PBX_TILE_TWD_SIZE 0x00000100 +#define REALVIEW_PBX_TILE_GIC_DIST_BASE 0x1F001000 /* Private Generic interrupt controller distributor */ +#define REALVIEW_PBX_TILE_L220_BASE 0x1F002000 /* L220 registers */ + +#define REALVIEW_PBX_SYS_PLD_CTRL1 0x74 + +/* + * PBX PCI regions + */ +#define REALVIEW_PBX_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PBX_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PBX_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PBX_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Core tile identification (REALVIEW_SYS_PROCID) + */ +#define REALVIEW_PBX_PROC_MASK 0xFF000000 +#define REALVIEW_PBX_PROC_ARM7TDMI 0x00000000 +#define REALVIEW_PBX_PROC_ARM9 0x02000000 +#define REALVIEW_PBX_PROC_ARM11 0x04000000 +#define REALVIEW_PBX_PROC_ARM11MP 0x06000000 +#define REALVIEW_PBX_PROC_A9MP 0x0C000000 +#define REALVIEW_PBX_PROC_A8 0x0E000000 + +#define check_pbx_proc(proc_type) \ + ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \ + == proc_type) + +#ifdef CONFIG_MACH_REALVIEW_PBX +#define core_tile_pbx11mp() check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP) +#define core_tile_pbxa9mp() check_pbx_proc(REALVIEW_PBX_PROC_A9MP) +#define core_tile_pbxa8() check_pbx_proc(REALVIEW_PBX_PROC_A8) +#else +#define core_tile_pbx11mp() 0 +#define core_tile_pbxa9mp() 0 +#define core_tile_pbxa8() 0 +#endif + +#endif /* __ASM_ARCH_BOARD_PBX_H */ diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 44575ed..baf1745 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -36,8 +36,7 @@ #include #include - -#include +#include "hardware.h" #include #include #include @@ -46,8 +45,7 @@ #include #include -#include -#include +#include "platform.h" #include diff --git a/arch/arm/mach-realview/hardware.h b/arch/arm/mach-realview/hardware.h new file mode 100644 index 0000000..281e71c --- /dev/null +++ b/arch/arm/mach-realview/hardware.h @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-realview/include/mach/hardware.h + * + * This file contains the hardware definitions of the RealView boards. + * + * Copyright (C) 2003 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include + +/* macro to get at IO space when running virtually */ +#ifdef CONFIG_MMU +/* + * Statically mapped addresses: + * + * 10xx xxxx -> fbxx xxxx + * 1exx xxxx -> fdxx xxxx + * 1fxx xxxx -> fexx xxxx + */ +#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000) +#else +#define IO_ADDRESS(x) (x) +#endif +#define __io_address(n) IOMEM(IO_ADDRESS(n)) + +#endif diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h deleted file mode 100644 index a301e61..0000000 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/board-eb.h - * - * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_EB_H -#define __ASM_ARCH_BOARD_EB_H - -#include - -/* - * RealView EB + ARM11MPCore peripheral addresses - */ -#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ -#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */ - -#define REALVIEW_EB_FLASH_BASE 0x40000000 -#define REALVIEW_EB_FLASH_SIZE SZ_64M -#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ - -#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x10100000 -#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ -#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ -#else -#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 -#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ -#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ -#endif - -#define REALVIEW_EB11MP_PRIV_MEM_SIZE SZ_8K -#define REALVIEW_EB11MP_PRIV_MEM_OFF(x) (REALVIEW_EB11MP_PRIV_MEM_BASE + (x)) - -#define REALVIEW_EB11MP_SCU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0) /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100) /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600) -#define REALVIEW_EB11MP_GIC_DIST_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000) /* Generic interrupt controller distributor */ - -/* - * Core tile identification (REALVIEW_SYS_PROCID) - */ -#define REALVIEW_EB_PROC_MASK 0xFF000000 -#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000 -#define REALVIEW_EB_PROC_ARM9 0x02000000 -#define REALVIEW_EB_PROC_ARM11 0x04000000 -#define REALVIEW_EB_PROC_ARM11MP 0x06000000 -#define REALVIEW_EB_PROC_A9MP 0x0C000000 - -#define check_eb_proc(proc_type) \ - ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ - == proc_type) - -#ifdef CONFIG_REALVIEW_EB_ARM11MP -#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP) -#else -#define core_tile_eb11mp() 0 -#endif - -#ifdef CONFIG_REALVIEW_EB_A9MP -#define core_tile_a9mp() check_eb_proc(REALVIEW_EB_PROC_A9MP) -#else -#define core_tile_a9mp() 0 -#endif - -#define machine_is_realview_eb_mp() \ - (machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp())) - -#endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h deleted file mode 100644 index 2a15fef..0000000 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/board-pb1176.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PB1176_H -#define __ASM_ARCH_BOARD_PB1176_H - -#include - -/* - * Peripheral addresses - */ -#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */ -#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ -#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ -#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ -#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define REALVIEW_PB1176_FLASH_BASE 0x30000000 -#define REALVIEW_PB1176_FLASH_SIZE SZ_64M -#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */ -#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M - -#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ -#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ -#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */ -#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */ -#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */ -#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */ -#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */ -#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */ -#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */ -#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */ -#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */ -#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */ -#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */ -#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */ - -/* - * PCI regions - */ -#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */ -#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */ -#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */ -#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */ -#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */ -#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */ - -#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */ - -#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ -#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ -#define REALVIEW_DC1176_ROM_BASE 0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */ -#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ -#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ -#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ - -/* - * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset - */ -#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100 - -#endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h deleted file mode 100644 index aa2d4e0..0000000 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/board-pb11mp.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PB11MP_H -#define __ASM_ARCH_BOARD_PB11MP_H - -#include - -/* - * Peripheral addresses - */ -#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ -#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ -#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ -#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */ -#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ -#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */ -#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */ -#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */ -#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ -#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000 -#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M -#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000 -#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M -#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */ -#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ -#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */ -#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ -#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ - -#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74 - -/* - * PB11MPCore PCI regions - */ -#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */ -#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ -#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ - -#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */ -#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */ -#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */ - -/* - * Testchip peripheral and fpga gic regions - */ -#define REALVIEW_TC11MP_PRIV_MEM_BASE 0x1F000000 -#define REALVIEW_TC11MP_PRIV_MEM_SIZE SZ_8K -#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ -#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ -#define REALVIEW_TC11MP_TWD_BASE 0x1F000600 -#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ -#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ - - /* - * Values for REALVIEW_SYS_RESET_CTRL - */ -#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET 0x03 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET 0x04 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR 0x05 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC 0x06 - -#define REALVIEW_PB11MP_SYS_CTRL_LED (1 << 0) - -#endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h deleted file mode 100644 index 4dfc67a..0000000 --- a/arch/arm/mach-realview/include/mach/board-pba8.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * include/asm-arm/arch-realview/board-pba8.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PBA8_H -#define __ASM_ARCH_BOARD_PBA8_H - -#include - -/* - * Peripheral addresses - */ -#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ -#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ -#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ -#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */ -#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ -#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */ -#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */ -#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_PBA8_FLASH0_BASE 0x40000000 -#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M -#define REALVIEW_PBA8_FLASH1_BASE 0x44000000 -#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M -#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */ -#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ -#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */ -#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ -#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ - -#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74 - -/* - * PBA8 PCI regions - */ -#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */ -#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ -#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ - -#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */ -#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ -#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ - -#endif /* __ASM_ARCH_BOARD_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h deleted file mode 100644 index 848bfff..0000000 --- a/arch/arm/mach-realview/include/mach/board-pbx.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/board-pbx.h - * - * Copyright (C) 2009 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_BOARD_PBX_H -#define __ASM_ARCH_BOARD_PBX_H - -#include - -/* - * Peripheral addresses - */ -#define REALVIEW_PBX_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_PBX_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_PBX_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_PBX_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_PBX_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_PBX_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ -#define REALVIEW_PBX_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_PBX_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_PBX_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_PBX_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_PBX_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_PBX_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ -#define REALVIEW_PBX_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ -#define REALVIEW_PBX_SCTL_BASE 0x1001A000 /* System Controller */ -#define REALVIEW_PBX_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_PBX_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ -#define REALVIEW_PBX_DMC_BASE 0x100E0000 /* DMC configuration */ -#define REALVIEW_PBX_SMC_BASE 0x100E1000 /* SMC configuration */ -#define REALVIEW_PBX_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PBX_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_PBX_FLASH0_BASE 0x40000000 -#define REALVIEW_PBX_FLASH0_SIZE SZ_64M -#define REALVIEW_PBX_FLASH1_BASE 0x44000000 -#define REALVIEW_PBX_FLASH1_SIZE SZ_64M -#define REALVIEW_PBX_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_PBX_USB_BASE 0x4F000000 /* USB */ -#define REALVIEW_PBX_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ -#define REALVIEW_PBX_LT_BASE 0xC0000000 /* Logic Tile expansion */ -#define REALVIEW_PBX_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ -#define REALVIEW_PBX_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ - -/* - * Tile-specific addresses - */ -#define REALVIEW_PBX_TILE_SCU_BASE 0x1F000000 /* SCU registers */ -#define REALVIEW_PBX_TILE_GIC_CPU_BASE 0x1F000100 /* Private Generic interrupt controller CPU interface */ -#define REALVIEW_PBX_TILE_TWD_BASE 0x1F000600 -#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE 0x1F000700 -#define REALVIEW_PBX_TILE_TWD_SIZE 0x00000100 -#define REALVIEW_PBX_TILE_GIC_DIST_BASE 0x1F001000 /* Private Generic interrupt controller distributor */ -#define REALVIEW_PBX_TILE_L220_BASE 0x1F002000 /* L220 registers */ - -#define REALVIEW_PBX_SYS_PLD_CTRL1 0x74 - -/* - * PBX PCI regions - */ -#define REALVIEW_PBX_PCI_BASE 0x90040000 /* PCI-X Unit base */ -#define REALVIEW_PBX_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ -#define REALVIEW_PBX_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ - -#define REALVIEW_PBX_PCI_BASE_SIZE 0x10000 /* 16 Kb */ -#define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */ -#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */ - -/* - * Core tile identification (REALVIEW_SYS_PROCID) - */ -#define REALVIEW_PBX_PROC_MASK 0xFF000000 -#define REALVIEW_PBX_PROC_ARM7TDMI 0x00000000 -#define REALVIEW_PBX_PROC_ARM9 0x02000000 -#define REALVIEW_PBX_PROC_ARM11 0x04000000 -#define REALVIEW_PBX_PROC_ARM11MP 0x06000000 -#define REALVIEW_PBX_PROC_A9MP 0x0C000000 -#define REALVIEW_PBX_PROC_A8 0x0E000000 - -#define check_pbx_proc(proc_type) \ - ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \ - == proc_type) - -#ifdef CONFIG_MACH_REALVIEW_PBX -#define core_tile_pbx11mp() check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP) -#define core_tile_pbxa9mp() check_pbx_proc(REALVIEW_PBX_PROC_A9MP) -#define core_tile_pbxa8() check_pbx_proc(REALVIEW_PBX_PROC_A8) -#else -#define core_tile_pbx11mp() 0 -#define core_tile_pbxa9mp() 0 -#define core_tile_pbxa8() 0 -#endif - -#endif /* __ASM_ARCH_BOARD_PBX_H */ diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h deleted file mode 100644 index 281e71c..0000000 --- a/arch/arm/mach-realview/include/mach/hardware.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/hardware.h - * - * This file contains the hardware definitions of the RealView boards. - * - * Copyright (C) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* macro to get at IO space when running virtually */ -#ifdef CONFIG_MMU -/* - * Statically mapped addresses: - * - * 10xx xxxx -> fbxx xxxx - * 1exx xxxx -> fdxx xxxx - * 1fxx xxxx -> fexx xxxx - */ -#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000) -#else -#define IO_ADDRESS(x) (x) -#endif -#define __io_address(n) IOMEM(IO_ADDRESS(n)) - -#endif diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h deleted file mode 100644 index 4475423..0000000 --- a/arch/arm/mach-realview/include/mach/irqs-eb.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/irqs-eb.h - * - * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_IRQS_EB_H -#define __MACH_IRQS_EB_H - -#define IRQ_EB_GIC_START 32 - -/* - * RealView EB interrupt sources - */ -#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ -#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ -#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ -#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ -#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ -#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ -#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ -#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ -#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ -#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ -#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ -#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ -#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ -#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ -#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ -#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ - -/* - * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) - */ -#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) -#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) -#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) -#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) -#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) -#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) -#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) -#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) -#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) -#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) -#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ -#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ -#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ -#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ -#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) -#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) - -#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) -#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) -#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) -#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) -#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) -#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) -#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) -#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) -#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) -#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) -#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) -#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) - -#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) -#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) -#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) - -/* - * The 11MPcore tile leaves the following unconnected. - */ -#define IRQ_EB11MP_UART2 0 -#define IRQ_EB11MP_UART3 0 -#define IRQ_EB11MP_CLCD 0 -#define IRQ_EB11MP_DMA 0 -#define IRQ_EB11MP_WDOG 0 -#define IRQ_EB11MP_GPIO0 0 -#define IRQ_EB11MP_GPIO1 0 -#define IRQ_EB11MP_GPIO2 0 -#define IRQ_EB11MP_SCI 0 -#define IRQ_EB11MP_SSP 0 - -#define NR_GIC_EB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_EB - */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 128) - -#if defined(CONFIG_MACH_REALVIEW_EB) \ - && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_EB -#endif - -#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ - && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_EB11MP -#endif - -#endif /* __MACH_IRQS_EB_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h deleted file mode 100644 index 708f841..0000000 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/irqs-pb1176.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_IRQS_PB1176_H -#define __MACH_IRQS_PB1176_H - -#define IRQ_DC1176_GIC_START 32 -#define IRQ_PB1176_GIC_START 64 - -/* - * ARM1176 DevChip interrupt sources (primary GIC) - */ -#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ -#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ -#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_DC1176_CORE_PMU (IRQ_DC1176_GIC_START + 7) /* Core PMU interrupt */ -#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ -#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ -#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ -#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) -#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) -#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) -#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) -#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ -#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16) -#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ -#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ -#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ -#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ -#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ - -#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ -#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ - -/* - * RealView PB1176 interrupt sources (secondary GIC) - */ -#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ -#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ -#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ -#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ -#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) -#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ -#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ -#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) -#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) -#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ -#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ - -#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) - -#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ - -#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) -#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) -#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ -#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ - -#define IRQ_PB1176_SCTL -1 - -#define NR_GIC_PB1176 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB1176 - */ -#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB1176) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB1176 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB1176 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB1176 */ - -#endif /* __MACH_IRQS_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h deleted file mode 100644 index 34e255a..0000000 --- a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/irqs-pb11mp.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_IRQS_PB11MP_H -#define __MACH_IRQS_PB11MP_H - -#define IRQ_TC11MP_GIC_START 32 -#define IRQ_PB11MP_GIC_START 64 - -/* - * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) - */ -#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) -#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) -#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) -#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) -#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) -#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) -#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) -#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) -#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) -#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) -#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ -#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ -#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ -#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ -#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) -#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) - -#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) -#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) -#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) -#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) -#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) -#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) -#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) -#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) -#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) -#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) -#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) -#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) - -#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) -#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) -#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) - -/* - * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) - */ -#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ -#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ -#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ -#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ -#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ -#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ -#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ -#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ -#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PB11MP_SMC -1 -#define IRQ_PB11MP_SCTL -1 - -#define NR_GIC_PB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB11MP - */ -#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB11MP) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB11MP -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB11MP -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB11MP */ - -#endif /* __MACH_IRQS_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h deleted file mode 100644 index 4a88a4e..0000000 --- a/arch/arm/mach-realview/include/mach/irqs-pba8.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/irqs-pba8.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_IRQS_PBA8_H -#define __MACH_IRQS_PBA8_H - -#define IRQ_PBA8_GIC_START 32 - -/* - * PB-A8 on-board gic irq sources - */ -#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ -#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ -#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ -#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ -#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ -#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ -#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ -#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ -#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ -#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ -#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PBA8_PMU (IRQ_PBA8_GIC_START + 47) /* Cortex-A8 PMU */ - -/* ... */ -#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) -#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) -#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) -#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) - -#define IRQ_PBA8_SMC -1 -#define IRQ_PBA8_SCTL -1 - -#define NR_GIC_PBA8 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBA8 - */ -#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) - -#if defined(CONFIG_MACH_REALVIEW_PBA8) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBA8 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBA8 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBA8 */ - -#endif /* __MACH_IRQS_PBA8_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h deleted file mode 100644 index 206a300..0000000 --- a/arch/arm/mach-realview/include/mach/irqs-pbx.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/irqs-pbx.h - * - * Copyright (C) 2009 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __MACH_IRQS_PBX_H -#define __MACH_IRQS_PBX_H - -#define IRQ_PBX_GIC_START 32 - -/* - * PBX on-board gic irq sources - */ -#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */ -#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */ -#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */ -#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */ -#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */ -#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */ -#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */ -#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */ -#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */ -#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */ -#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */ -#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33) -#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34) -#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35) -#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36) -#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37) -#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38) -#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39) - -#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */ -#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ -#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ -/* ... */ -#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ -#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 45) -#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 46) -#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 47) - -/* ... */ -#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) -#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51) -#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52) -#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53) - -#define IRQ_PBX_SMC -1 -#define IRQ_PBX_SCTL -1 - -#define NR_GIC_PBX 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBX - */ -#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PBX) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBX -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBX -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBX */ - -#endif /* __MACH_IRQS_PBX_H */ diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h deleted file mode 100644 index 78854f2..0000000 --- a/arch/arm/mach-realview/include/mach/irqs.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/irqs.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include -#include -#include -#include -#include - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 - -#define IRQ_GIC_START 32 - -#ifndef NR_IRQS -#error "NR_IRQS not defined by the board-specific files" -#endif - -#endif diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h deleted file mode 100644 index 1b77a27..0000000 --- a/arch/arm/mach-realview/include/mach/platform.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/platform.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PLATFORM_H -#define __ASM_ARCH_PLATFORM_H - -/* - * Memory definitions - */ -#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ -#define REALVIEW_BOOT_ROM_HI 0x30000000 -#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */ -#define REALVIEW_BOOT_ROM_SIZE SZ_64M - -#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ -#define REALVIEW_SSRAM_SIZE SZ_2M - -/* - * SDRAM - */ -#define REALVIEW_SDRAM_BASE 0x00000000 - -/* - * Logic expansion modules - * - */ - - -/* ------------------------------------------------------------------------ - * RealView Registers - * ------------------------------------------------------------------------ - * - */ -#define REALVIEW_SYS_ID_OFFSET 0x00 -#define REALVIEW_SYS_SW_OFFSET 0x04 -#define REALVIEW_SYS_LED_OFFSET 0x08 -#define REALVIEW_SYS_OSC0_OFFSET 0x0C - -#define REALVIEW_SYS_OSC1_OFFSET 0x10 -#define REALVIEW_SYS_OSC2_OFFSET 0x14 -#define REALVIEW_SYS_OSC3_OFFSET 0x18 -#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */ - -#define REALVIEW_SYS_LOCK_OFFSET 0x20 -#define REALVIEW_SYS_100HZ_OFFSET 0x24 -#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28 -#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C -#define REALVIEW_SYS_FLAGS_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34 -#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38 -#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38 -#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C -#define REALVIEW_SYS_RESETCTL_OFFSET 0x40 -#define REALVIEW_SYS_PCICTL_OFFSET 0x44 -#define REALVIEW_SYS_MCI_OFFSET 0x48 -#define REALVIEW_SYS_FLASH_OFFSET 0x4C -#define REALVIEW_SYS_CLCD_OFFSET 0x50 -#define REALVIEW_SYS_CLCDSER_OFFSET 0x54 -#define REALVIEW_SYS_BOOTCS_OFFSET 0x58 -#define REALVIEW_SYS_24MHz_OFFSET 0x5C -#define REALVIEW_SYS_MISC_OFFSET 0x60 -#define REALVIEW_SYS_IOSEL_OFFSET 0x70 -#define REALVIEW_SYS_PROCID_OFFSET 0x84 -#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0 -#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4 -#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8 -#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC -#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0 - -#define REALVIEW_SYS_BASE 0x10000000 -#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET) -#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET) -#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET) -#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET) -#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET) - -#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET) -#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET) -#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET) -#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET) -#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET) -#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET) -#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET) -#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET) -#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET) -#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET) -#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET) -#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET) -#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET) -#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET) -#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET) -#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET) -#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET) -#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET) -#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET) -#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET) -#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET) -#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET) -#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET) -#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET) -#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) -#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) - -/* ------------------------------------------------------------------------ - * RealView control registers - * ------------------------------------------------------------------------ - */ - -/* - * REALVIEW_IDFIELD - * - * 31:24 = manufacturer (0x41 = ARM) - * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) - * 15:12 = FPGA (0x3 = XVC600 or XVC600E) - * 11:4 = build value - * 3:0 = revision number (0x1 = rev B (AHB)) - */ - -/* - * REALVIEW_SYS_LOCK - * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, - * SYS_CLD, SYS_BOOTCS - */ -#define REALVIEW_SYS_LOCK_LOCKED (1 << 16) -#define REALVIEW_SYS_LOCK_VAL 0xA05F /* Enable write access */ - -/* - * REALVIEW_SYS_FLASH - */ -#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ - -/* - * REALVIEW_INTREG - * - used to acknowledge and control MMCI and UART interrupts - */ -#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ -#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ -#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */ - /* write 1 to acknowledge and clear */ -#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ -#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ - -/* - * RealView common peripheral addresses - */ -#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ -#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ -#define REALVIEW_AACI_BASE 0x10004000 /* Audio */ -#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ -#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ -#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ -#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ -#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ -#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ -#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ -#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ - -/* PCI space */ -#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ -#define REALVIEW_PCI_CFG_BASE 0x42000000 -#define REALVIEW_PCI_MEM_BASE0 0x44000000 -#define REALVIEW_PCI_MEM_BASE1 0x50000000 -#define REALVIEW_PCI_MEM_BASE2 0x60000000 -/* Sizes of above maps */ -#define REALVIEW_PCI_BASE_SIZE 0x01000000 -#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000 -#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ -#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ -#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ - -#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */ - -/* - * CompactFlash - */ -#define REALVIEW_CF_BASE 0x18000000 /* CompactFlash */ -#define REALVIEW_CF_MEM_BASE 0x18003000 /* SMC for CompactFlash */ - -/* - * Disk on Chip - */ -#define REALVIEW_DOC_BASE 0x2C000000 -#define REALVIEW_DOC_SIZE (16 << 20) -#define REALVIEW_DOC_PAGE_SIZE 512 -#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) - -#define ERASE_UNIT_PAGES 32 -#define START_PAGE 0x80 - -/* - * LED settings, bits [7:0] - */ -#define REALVIEW_SYS_LED0 (1 << 0) -#define REALVIEW_SYS_LED1 (1 << 1) -#define REALVIEW_SYS_LED2 (1 << 2) -#define REALVIEW_SYS_LED3 (1 << 3) -#define REALVIEW_SYS_LED4 (1 << 4) -#define REALVIEW_SYS_LED5 (1 << 5) -#define REALVIEW_SYS_LED6 (1 << 6) -#define REALVIEW_SYS_LED7 (1 << 7) - -#define ALL_LEDS 0xFF - -#define LED_BANK REALVIEW_SYS_LED - -/* - * Control registers - */ -#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */ -#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */ -#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ -#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ - -/* - * System controller bit assignment - */ -#define REALVIEW_REFCLK 0 -#define REALVIEW_TIMCLK 1 - -#define REALVIEW_TIMER1_EnSel 15 -#define REALVIEW_TIMER2_EnSel 17 -#define REALVIEW_TIMER3_EnSel 19 -#define REALVIEW_TIMER4_EnSel 21 - - -#define REALVIEW_CSR_BASE 0x10000000 -#define REALVIEW_CSR_SIZE 0x10000000 - -#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h deleted file mode 100644 index cfa30d2..0000000 --- a/arch/arm/mach-realview/include/mach/uncompress.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include - -#include -#include -#include -#include -#include - -#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) -#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) -#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) -#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) - -/* - * Return the UART base address - */ -static inline unsigned long get_uart_base(void) -{ - if (machine_is_realview_eb()) - return REALVIEW_EB_UART0_BASE; - else if (machine_is_realview_pb11mp()) - return REALVIEW_PB11MP_UART0_BASE; - else if (machine_is_realview_pb1176()) - return REALVIEW_PB1176_UART0_BASE; - else if (machine_is_realview_pba8()) - return REALVIEW_PBA8_UART0_BASE; - else if (machine_is_realview_pbx()) - return REALVIEW_PBX_UART0_BASE; - else - return 0; -} - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 5)) - barrier(); - - AMBA_UART_DR(base) = c; -} - -static inline void flush(void) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-realview/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h new file mode 100644 index 0000000..4475423 --- /dev/null +++ b/arch/arm/mach-realview/irqs-eb.h @@ -0,0 +1,132 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-eb.h + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_EB_H +#define __MACH_IRQS_EB_H + +#define IRQ_EB_GIC_START 32 + +/* + * RealView EB interrupt sources + */ +#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ +#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ +#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ +#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ +#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ +#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ +#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ +#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ +#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ +#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ +#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ +#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ +#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ +#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ +#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ +#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ + +/* + * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) + */ +#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) +#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) +#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) +#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) +#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) +#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) +#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) +#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) +#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) +#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) +#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ +#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ +#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ +#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ +#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) +#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) + +#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) +#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) +#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) +#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) +#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) +#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) +#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) +#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) +#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) +#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) +#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) +#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) + +#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) +#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) +#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) + +/* + * The 11MPcore tile leaves the following unconnected. + */ +#define IRQ_EB11MP_UART2 0 +#define IRQ_EB11MP_UART3 0 +#define IRQ_EB11MP_CLCD 0 +#define IRQ_EB11MP_DMA 0 +#define IRQ_EB11MP_WDOG 0 +#define IRQ_EB11MP_GPIO0 0 +#define IRQ_EB11MP_GPIO1 0 +#define IRQ_EB11MP_GPIO2 0 +#define IRQ_EB11MP_SCI 0 +#define IRQ_EB11MP_SSP 0 + +#define NR_GIC_EB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_EB + */ +#define NR_IRQS_EB (IRQ_EB_GIC_START + 128) + +#if defined(CONFIG_MACH_REALVIEW_EB) \ + && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_EB +#endif + +#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ + && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_EB11MP +#endif + +#endif /* __MACH_IRQS_EB_H */ diff --git a/arch/arm/mach-realview/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h new file mode 100644 index 0000000..bfd1bad --- /dev/null +++ b/arch/arm/mach-realview/irqs-pb1176.h @@ -0,0 +1,98 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pb1176.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PB1176_H +#define __MACH_IRQS_PB1176_H + +#define IRQ_DC1176_GIC_START 32 +#define IRQ_PB1176_GIC_START 64 + +/* + * ARM1176 DevChip interrupt sources (primary GIC) + */ +#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ +#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ +#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_CORE_PMU (IRQ_DC1176_GIC_START + 7) /* Core PMU interrupt */ +#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ +#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ +#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ +#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) +#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) +#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) +#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) +#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16) +#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ +#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ +#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ +#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ +#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ + +#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ +#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ + +/* + * RealView PB1176 interrupt sources (secondary GIC) + */ +#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ +#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ +#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ +#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ +#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) +#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ +#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ +#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) +#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) +#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ +#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ + +#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) + +#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ + +#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) +#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) +#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ +#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ + +#define IRQ_PB1176_SCTL -1 + +#define NR_GIC_PB1176 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB1176 + */ +#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB1176) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB1176 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB1176 +#endif + +#endif /* __MACH_IRQS_PB1176_H */ diff --git a/arch/arm/mach-realview/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h new file mode 100644 index 0000000..34e255a --- /dev/null +++ b/arch/arm/mach-realview/irqs-pb11mp.h @@ -0,0 +1,122 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pb11mp.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PB11MP_H +#define __MACH_IRQS_PB11MP_H + +#define IRQ_TC11MP_GIC_START 32 +#define IRQ_PB11MP_GIC_START 64 + +/* + * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) + */ +#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) +#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) +#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) +#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) +#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) +#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) +#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) +#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) +#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) +#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) +#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ +#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ +#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ +#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ +#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) +#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) + +#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) +#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) +#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) +#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) +#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) +#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) +#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) +#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) +#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) +#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) +#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) +#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) + +#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) +#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) + +/* + * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) + */ +#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ +#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ +#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ +#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ +#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ +#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ +#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ +#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ +#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PB11MP_SMC -1 +#define IRQ_PB11MP_SCTL -1 + +#define NR_GIC_PB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB11MP + */ +#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB11MP) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB11MP +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB11MP +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB11MP */ + +#endif /* __MACH_IRQS_PB11MP_H */ diff --git a/arch/arm/mach-realview/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h new file mode 100644 index 0000000..4a88a4e --- /dev/null +++ b/arch/arm/mach-realview/irqs-pba8.h @@ -0,0 +1,94 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pba8.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_IRQS_PBA8_H +#define __MACH_IRQS_PBA8_H + +#define IRQ_PBA8_GIC_START 32 + +/* + * PB-A8 on-board gic irq sources + */ +#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ +#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ +#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ +#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ +#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PBA8_PMU (IRQ_PBA8_GIC_START + 47) /* Cortex-A8 PMU */ + +/* ... */ +#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) +#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) +#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) +#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) + +#define IRQ_PBA8_SMC -1 +#define IRQ_PBA8_SCTL -1 + +#define NR_GIC_PBA8 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBA8 + */ +#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) + +#if defined(CONFIG_MACH_REALVIEW_PBA8) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBA8 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBA8 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBA8 */ + +#endif /* __MACH_IRQS_PBA8_H */ diff --git a/arch/arm/mach-realview/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h new file mode 100644 index 0000000..206a300 --- /dev/null +++ b/arch/arm/mach-realview/irqs-pbx.h @@ -0,0 +1,109 @@ +/* + * arch/arm/mach-realview/include/mach/irqs-pbx.h + * + * Copyright (C) 2009 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __MACH_IRQS_PBX_H +#define __MACH_IRQS_PBX_H + +#define IRQ_PBX_GIC_START 32 + +/* + * PBX on-board gic irq sources + */ +#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */ +#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */ +#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */ +#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */ +#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */ +#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */ +#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */ +#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */ +#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */ +#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */ +#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */ +#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33) +#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34) +#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35) +#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36) +#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37) +#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38) +#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39) + +#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */ +#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ +#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ +/* ... */ +#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ +#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 45) +#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 46) +#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 47) + +/* ... */ +#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) +#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51) +#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52) +#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53) + +#define IRQ_PBX_SMC -1 +#define IRQ_PBX_SCTL -1 + +#define NR_GIC_PBX 1 + +/* + * Only define NR_IRQS if less than NR_IRQS_PBX + */ +#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PBX) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PBX +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PBX +#endif + +#endif /* CONFIG_MACH_REALVIEW_PBX */ + +#endif /* __MACH_IRQS_PBX_H */ diff --git a/arch/arm/mach-realview/irqs.h b/arch/arm/mach-realview/irqs.h new file mode 100644 index 0000000..1bd8a9a --- /dev/null +++ b/arch/arm/mach-realview/irqs.h @@ -0,0 +1,40 @@ +/* + * arch/arm/mach-realview/include/mach/irqs.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include "irqs-eb.h" +#include "irqs-pb11mp.h" +#include "irqs-pb1176.h" +#include "irqs-pba8.h" +#include "irqs-pbx.h" + +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 + +#define IRQ_GIC_START 32 + +#ifndef NR_IRQS +#error "NR_IRQS not defined by the board-specific files" +#endif + +#endif diff --git a/arch/arm/mach-realview/platform.h b/arch/arm/mach-realview/platform.h new file mode 100644 index 0000000..1b77a27 --- /dev/null +++ b/arch/arm/mach-realview/platform.h @@ -0,0 +1,249 @@ +/* + * arch/arm/mach-realview/include/mach/platform.h + * + * Copyright (c) ARM Limited 2003. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_PLATFORM_H +#define __ASM_ARCH_PLATFORM_H + +/* + * Memory definitions + */ +#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ +#define REALVIEW_BOOT_ROM_HI 0x30000000 +#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */ +#define REALVIEW_BOOT_ROM_SIZE SZ_64M + +#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ +#define REALVIEW_SSRAM_SIZE SZ_2M + +/* + * SDRAM + */ +#define REALVIEW_SDRAM_BASE 0x00000000 + +/* + * Logic expansion modules + * + */ + + +/* ------------------------------------------------------------------------ + * RealView Registers + * ------------------------------------------------------------------------ + * + */ +#define REALVIEW_SYS_ID_OFFSET 0x00 +#define REALVIEW_SYS_SW_OFFSET 0x04 +#define REALVIEW_SYS_LED_OFFSET 0x08 +#define REALVIEW_SYS_OSC0_OFFSET 0x0C + +#define REALVIEW_SYS_OSC1_OFFSET 0x10 +#define REALVIEW_SYS_OSC2_OFFSET 0x14 +#define REALVIEW_SYS_OSC3_OFFSET 0x18 +#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */ + +#define REALVIEW_SYS_LOCK_OFFSET 0x20 +#define REALVIEW_SYS_100HZ_OFFSET 0x24 +#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28 +#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C +#define REALVIEW_SYS_FLAGS_OFFSET 0x30 +#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 +#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34 +#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38 +#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38 +#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C +#define REALVIEW_SYS_RESETCTL_OFFSET 0x40 +#define REALVIEW_SYS_PCICTL_OFFSET 0x44 +#define REALVIEW_SYS_MCI_OFFSET 0x48 +#define REALVIEW_SYS_FLASH_OFFSET 0x4C +#define REALVIEW_SYS_CLCD_OFFSET 0x50 +#define REALVIEW_SYS_CLCDSER_OFFSET 0x54 +#define REALVIEW_SYS_BOOTCS_OFFSET 0x58 +#define REALVIEW_SYS_24MHz_OFFSET 0x5C +#define REALVIEW_SYS_MISC_OFFSET 0x60 +#define REALVIEW_SYS_IOSEL_OFFSET 0x70 +#define REALVIEW_SYS_PROCID_OFFSET 0x84 +#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0 +#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4 +#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8 +#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC +#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0 + +#define REALVIEW_SYS_BASE 0x10000000 +#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET) +#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET) +#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET) +#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET) +#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET) + +#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET) +#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET) +#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET) +#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET) +#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET) +#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET) +#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET) +#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET) +#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET) +#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET) +#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET) +#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET) +#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET) +#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET) +#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET) +#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET) +#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET) +#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET) +#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET) +#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET) +#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET) +#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET) +#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET) +#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET) +#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) +#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) + +/* ------------------------------------------------------------------------ + * RealView control registers + * ------------------------------------------------------------------------ + */ + +/* + * REALVIEW_IDFIELD + * + * 31:24 = manufacturer (0x41 = ARM) + * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) + * 15:12 = FPGA (0x3 = XVC600 or XVC600E) + * 11:4 = build value + * 3:0 = revision number (0x1 = rev B (AHB)) + */ + +/* + * REALVIEW_SYS_LOCK + * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, + * SYS_CLD, SYS_BOOTCS + */ +#define REALVIEW_SYS_LOCK_LOCKED (1 << 16) +#define REALVIEW_SYS_LOCK_VAL 0xA05F /* Enable write access */ + +/* + * REALVIEW_SYS_FLASH + */ +#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ + +/* + * REALVIEW_INTREG + * - used to acknowledge and control MMCI and UART interrupts + */ +#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ +#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ +#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */ + /* write 1 to acknowledge and clear */ +#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ +#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ + +/* + * RealView common peripheral addresses + */ +#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ +#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ +#define REALVIEW_AACI_BASE 0x10004000 /* Audio */ +#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ +#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ +#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ +#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ +#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ +#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ +#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ +#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ +#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ + +/* PCI space */ +#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ +#define REALVIEW_PCI_CFG_BASE 0x42000000 +#define REALVIEW_PCI_MEM_BASE0 0x44000000 +#define REALVIEW_PCI_MEM_BASE1 0x50000000 +#define REALVIEW_PCI_MEM_BASE2 0x60000000 +/* Sizes of above maps */ +#define REALVIEW_PCI_BASE_SIZE 0x01000000 +#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000 +#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ +#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ +#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ + +#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ +#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */ + +/* + * CompactFlash + */ +#define REALVIEW_CF_BASE 0x18000000 /* CompactFlash */ +#define REALVIEW_CF_MEM_BASE 0x18003000 /* SMC for CompactFlash */ + +/* + * Disk on Chip + */ +#define REALVIEW_DOC_BASE 0x2C000000 +#define REALVIEW_DOC_SIZE (16 << 20) +#define REALVIEW_DOC_PAGE_SIZE 512 +#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) + +#define ERASE_UNIT_PAGES 32 +#define START_PAGE 0x80 + +/* + * LED settings, bits [7:0] + */ +#define REALVIEW_SYS_LED0 (1 << 0) +#define REALVIEW_SYS_LED1 (1 << 1) +#define REALVIEW_SYS_LED2 (1 << 2) +#define REALVIEW_SYS_LED3 (1 << 3) +#define REALVIEW_SYS_LED4 (1 << 4) +#define REALVIEW_SYS_LED5 (1 << 5) +#define REALVIEW_SYS_LED6 (1 << 6) +#define REALVIEW_SYS_LED7 (1 << 7) + +#define ALL_LEDS 0xFF + +#define LED_BANK REALVIEW_SYS_LED + +/* + * Control registers + */ +#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */ +#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */ +#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ +#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ + +/* + * System controller bit assignment + */ +#define REALVIEW_REFCLK 0 +#define REALVIEW_TIMCLK 1 + +#define REALVIEW_TIMER1_EnSel 15 +#define REALVIEW_TIMER2_EnSel 17 +#define REALVIEW_TIMER3_EnSel 19 +#define REALVIEW_TIMER4_EnSel 21 + + +#define REALVIEW_CSR_BASE 0x10000000 +#define REALVIEW_CSR_SIZE 0x10000000 + +#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 98e3052..a2331b3 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -13,13 +13,13 @@ #include #include -#include +#include "hardware.h" #include #include -#include -#include -#include +#include "board-eb.h" +#include "board-pb11mp.h" +#include "board-pbx.h" #include diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 1a2a897..e23368c 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -31,7 +31,7 @@ #include #include -#include +#include "hardware.h" #include #include #include @@ -44,8 +44,8 @@ #include #include -#include -#include +#include "board-eb.h" +#include "irqs.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index ce92c18..e5fd1ce 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -34,7 +34,7 @@ #include #include -#include +#include "hardware.h" #include #include #include @@ -45,8 +45,8 @@ #include #include -#include -#include +#include "board-pb1176.h" +#include "irqs.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 5bb4603..3b82599 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -31,7 +31,7 @@ #include #include -#include +#include "hardware.h" #include #include #include @@ -44,8 +44,8 @@ #include #include -#include -#include +#include "board-pb11mp.h" +#include "irqs.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index b3549a6..263e373 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -39,9 +39,9 @@ #include #include -#include -#include -#include +#include "hardware.h" +#include "board-pba8.h" +#include "irqs.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index f26e1e0..810b154 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -41,9 +41,9 @@ #include #include -#include -#include -#include +#include "hardware.h" +#include "board-pbx.h" +#include "irqs.h" #include "core.h" diff --git a/arch/arm/mach-realview/uncompress.h b/arch/arm/mach-realview/uncompress.h new file mode 100644 index 0000000..f8ac3e7 --- /dev/null +++ b/arch/arm/mach-realview/uncompress.h @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-realview/include/mach/uncompress.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include "hardware.h" +#include + +#include "board-eb.h" +#include "board-pb11mp.h" +#include "board-pb1176.h" +#include "board-pba8.h" +#include "board-pbx.h" + +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +/* + * Return the UART base address + */ +static inline unsigned long get_uart_base(void) +{ + if (machine_is_realview_eb()) + return REALVIEW_EB_UART0_BASE; + else if (machine_is_realview_pb11mp()) + return REALVIEW_PB11MP_UART0_BASE; + else if (machine_is_realview_pb1176()) + return REALVIEW_PB1176_UART0_BASE; + else if (machine_is_realview_pba8()) + return REALVIEW_PBA8_UART0_BASE; + else if (machine_is_realview_pbx()) + return REALVIEW_PBX_UART0_BASE; + else + return 0; +} + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) + barrier(); + + AMBA_UART_DR(base) = c; +} + +static inline void flush(void) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() -- cgit v0.10.2 From 38d2cfcc8d91e8c666ae15f2fdc23830b8ce9c94 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 Nov 2015 17:32:23 +0100 Subject: ARM: realview: clean up header files This contains multiple trivial cleanups to the realview headers: - removing the file names from the introductory comment - removing the uncompress.h header that is unused - removing the irqs.h header and NR_IRQS logic that is obsoleted by sparse IRQs Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij diff --git a/arch/arm/mach-realview/board-eb.h b/arch/arm/mach-realview/board-eb.h index ac9c98f..a850ae6 100644 --- a/arch/arm/mach-realview/board-eb.h +++ b/arch/arm/mach-realview/board-eb.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/board-eb.h - * * Copyright (C) 2007 ARM Limited * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-realview/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h index 836433d..29c04a9 100644 --- a/arch/arm/mach-realview/board-pb1176.h +++ b/arch/arm/mach-realview/board-pb1176.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/board-pb1176.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-realview/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h index e3a758b..b16e6e85 100644 --- a/arch/arm/mach-realview/board-pb11mp.h +++ b/arch/arm/mach-realview/board-pb11mp.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/board-pb11mp.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-realview/board-pba8.h b/arch/arm/mach-realview/board-pba8.h index 84232fe..6a1391f 100644 --- a/arch/arm/mach-realview/board-pba8.h +++ b/arch/arm/mach-realview/board-pba8.h @@ -1,6 +1,4 @@ /* - * include/asm-arm/arch-realview/board-pba8.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-realview/board-pbx.h b/arch/arm/mach-realview/board-pbx.h index 3dab54f..5cda480 100644 --- a/arch/arm/mach-realview/board-pbx.h +++ b/arch/arm/mach-realview/board-pbx.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/board-pbx.h - * * Copyright (C) 2009 ARM Limited * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 868ece2..e1640b2 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-realview/core.h - * * Copyright (C) 2004 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd * diff --git a/arch/arm/mach-realview/hardware.h b/arch/arm/mach-realview/hardware.h index 281e71c..957a230 100644 --- a/arch/arm/mach-realview/hardware.h +++ b/arch/arm/mach-realview/hardware.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/hardware.h - * * This file contains the hardware definitions of the RealView boards. * * Copyright (C) 2003 ARM Limited. diff --git a/arch/arm/mach-realview/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h index 4475423..61e3168 100644 --- a/arch/arm/mach-realview/irqs-eb.h +++ b/arch/arm/mach-realview/irqs-eb.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-eb.h - * * Copyright (C) 2007 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -21,6 +19,7 @@ #ifndef __MACH_IRQS_EB_H #define __MACH_IRQS_EB_H +#define IRQ_LOCALTIMER 29 #define IRQ_EB_GIC_START 32 /* @@ -112,21 +111,4 @@ #define NR_GIC_EB11MP 2 -/* - * Only define NR_IRQS if less than NR_IRQS_EB - */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 128) - -#if defined(CONFIG_MACH_REALVIEW_EB) \ - && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_EB -#endif - -#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \ - && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_EB11MP -#endif - #endif /* __MACH_IRQS_EB_H */ diff --git a/arch/arm/mach-realview/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h index bfd1bad..778edfd 100644 --- a/arch/arm/mach-realview/irqs-pb1176.h +++ b/arch/arm/mach-realview/irqs-pb1176.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-pb1176.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -76,23 +74,4 @@ #define IRQ_PB1176_SCTL -1 -#define NR_GIC_PB1176 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB1176 - */ -#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB1176) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB1176 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB1176 -#endif - #endif /* __MACH_IRQS_PB1176_H */ diff --git a/arch/arm/mach-realview/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h index 34e255a..938898a 100644 --- a/arch/arm/mach-realview/irqs-pb11mp.h +++ b/arch/arm/mach-realview/irqs-pb11mp.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-pb11mp.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -21,6 +19,7 @@ #ifndef __MACH_IRQS_PB11MP_H #define __MACH_IRQS_PB11MP_H +#define IRQ_LOCALTIMER 29 #define IRQ_TC11MP_GIC_START 32 #define IRQ_PB11MP_GIC_START 64 @@ -95,28 +94,4 @@ #define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ #define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ -#define IRQ_PB11MP_SMC -1 -#define IRQ_PB11MP_SCTL -1 - -#define NR_GIC_PB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB11MP - */ -#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB11MP) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB11MP -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB11MP -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB11MP */ - #endif /* __MACH_IRQS_PB11MP_H */ diff --git a/arch/arm/mach-realview/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h index 4a88a4e..262e321 100644 --- a/arch/arm/mach-realview/irqs-pba8.h +++ b/arch/arm/mach-realview/irqs-pba8.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-pba8.h - * * Copyright (C) 2008 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -70,25 +68,4 @@ #define IRQ_PBA8_SMC -1 #define IRQ_PBA8_SCTL -1 -#define NR_GIC_PBA8 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBA8 - */ -#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64) - -#if defined(CONFIG_MACH_REALVIEW_PBA8) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBA8 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBA8 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBA8 */ - #endif /* __MACH_IRQS_PBA8_H */ diff --git a/arch/arm/mach-realview/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h index 206a300..4ef0567 100644 --- a/arch/arm/mach-realview/irqs-pbx.h +++ b/arch/arm/mach-realview/irqs-pbx.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/irqs-pbx.h - * * Copyright (C) 2009 ARM Limited * * This program is free software; you can redistribute it and/or modify @@ -20,6 +18,7 @@ #ifndef __MACH_IRQS_PBX_H #define __MACH_IRQS_PBX_H +#define IRQ_LOCALTIMER 29 #define IRQ_PBX_GIC_START 32 /* @@ -85,25 +84,4 @@ #define IRQ_PBX_SMC -1 #define IRQ_PBX_SCTL -1 -#define NR_GIC_PBX 1 - -/* - * Only define NR_IRQS if less than NR_IRQS_PBX - */ -#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PBX) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PBX -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PBX -#endif - -#endif /* CONFIG_MACH_REALVIEW_PBX */ - #endif /* __MACH_IRQS_PBX_H */ diff --git a/arch/arm/mach-realview/irqs.h b/arch/arm/mach-realview/irqs.h deleted file mode 100644 index 1bd8a9a..0000000 --- a/arch/arm/mach-realview/irqs.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/irqs.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "irqs-eb.h" -#include "irqs-pb11mp.h" -#include "irqs-pb1176.h" -#include "irqs-pba8.h" -#include "irqs-pbx.h" - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 - -#define IRQ_GIC_START 32 - -#ifndef NR_IRQS -#error "NR_IRQS not defined by the board-specific files" -#endif - -#endif diff --git a/arch/arm/mach-realview/platform.h b/arch/arm/mach-realview/platform.h index 1b77a27..1112173 100644 --- a/arch/arm/mach-realview/platform.h +++ b/arch/arm/mach-realview/platform.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-realview/include/mach/platform.h - * * Copyright (c) ARM Limited 2003. All rights reserved. * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-realview/realview-dt.c index 382cc1b..88b6724 100644 --- a/arch/arm/mach-realview/realview-dt.c +++ b/arch/arm/mach-realview/realview-dt.c @@ -11,7 +11,6 @@ #include #include #include -#include "core.h" static const char *const realview_dt_platform_compat[] __initconst = { "arm,realview-eb", diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index e23368c..b442fa6 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -45,7 +45,7 @@ #include #include "board-eb.h" -#include "irqs.h" +#include "irqs-eb.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index e5fd1ce..537f387 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -46,7 +46,7 @@ #include #include "board-pb1176.h" -#include "irqs.h" +#include "irqs-pb1176.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 3b82599..a90a075 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -45,7 +45,7 @@ #include #include "board-pb11mp.h" -#include "irqs.h" +#include "irqs-pb11mp.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 263e373..ddafb67 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -41,7 +41,7 @@ #include "hardware.h" #include "board-pba8.h" -#include "irqs.h" +#include "irqs-pba8.h" #include "core.h" diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 810b154..b9f0757 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -43,7 +43,7 @@ #include "hardware.h" #include "board-pbx.h" -#include "irqs.h" +#include "irqs-pbx.h" #include "core.h" diff --git a/arch/arm/mach-realview/uncompress.h b/arch/arm/mach-realview/uncompress.h deleted file mode 100644 index f8ac3e7..0000000 --- a/arch/arm/mach-realview/uncompress.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include "hardware.h" -#include - -#include "board-eb.h" -#include "board-pb11mp.h" -#include "board-pb1176.h" -#include "board-pba8.h" -#include "board-pbx.h" - -#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) -#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) -#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) -#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) - -/* - * Return the UART base address - */ -static inline unsigned long get_uart_base(void) -{ - if (machine_is_realview_eb()) - return REALVIEW_EB_UART0_BASE; - else if (machine_is_realview_pb11mp()) - return REALVIEW_PB11MP_UART0_BASE; - else if (machine_is_realview_pb1176()) - return REALVIEW_PB1176_UART0_BASE; - else if (machine_is_realview_pba8()) - return REALVIEW_PBA8_UART0_BASE; - else if (machine_is_realview_pbx()) - return REALVIEW_PBX_UART0_BASE; - else - return 0; -} - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 5)) - barrier(); - - AMBA_UART_DR(base) = c; -} - -static inline void flush(void) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -- cgit v0.10.2 From 93b2d7b15af2805ae10db76c651684c5b88b1e9d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 18 Dec 2015 14:29:28 +0100 Subject: ARM: realview: select apropriate targets Now that we have multiplatform support, let the RealView defconfigs select all the RealView boards so we boot out of the box like before. This updates both defconfigs. Cc: Arnd Bergmann Signed-off-by: Linus Walleij diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index 1da5d9e..bff0754 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -8,10 +8,19 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_REALVIEW=y +CONFIG_REALVIEW_DT=y CONFIG_MACH_REALVIEW_EB=y +CONFIG_REALVIEW_EB_ARM1136=y +CONFIG_REALVIEW_EB_ARM1176=y +CONFIG_REALVIEW_EB_A9MP=y CONFIG_REALVIEW_EB_ARM11MP=y +CONFIG_REALVIEW_EB_ARM11MP_REVB=y CONFIG_MACH_REALVIEW_PB11MP=y +CONFIG_MACH_REALVIEW_PB1176=y +CONFIG_MACH_REALVIEW_PBA8=y +CONFIG_MACH_REALVIEW_PBX=y CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y CONFIG_AEABI=y diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index d02e9d9..bc6bef8 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -8,11 +8,19 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_REALVIEW=y +CONFIG_REALVIEW_DT=y CONFIG_MACH_REALVIEW_EB=y +CONFIG_REALVIEW_EB_ARM1136=y +CONFIG_REALVIEW_EB_ARM1176=y +CONFIG_REALVIEW_EB_A9MP=y CONFIG_REALVIEW_EB_ARM11MP=y +CONFIG_REALVIEW_EB_ARM11MP_REVB=y CONFIG_MACH_REALVIEW_PB11MP=y CONFIG_MACH_REALVIEW_PB1176=y +CONFIG_MACH_REALVIEW_PBA8=y +CONFIG_MACH_REALVIEW_PBX=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -- cgit v0.10.2