From a4243402274343d8e596fb0b25674e52088a7488 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 20 Jan 2014 23:46:38 +0100 Subject: iwlwifi: mvm: make local pointer non-static The address pointer used in the function shouldn't be static since it's local data only. Having it static causes races if a single machine has two devices, as the pointer would be shared between instances. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index ec18121..3397f59 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -652,7 +652,7 @@ int iwl_mvm_send_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); static const u8 _baddr[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; - static const u8 *baddr = _baddr; + const u8 *baddr = _baddr; lockdep_assert_held(&mvm->mutex); -- cgit v0.10.2 From 0822afe8ebb9389997ef677447c7b08e08797de9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 16 Jan 2014 09:18:07 +0100 Subject: iwlwifi: mvm: disable scheduled scan The iwlwifi scheduled scan implementation doesn't adhere to the userspace API correctly - the API assumes that any new incoming 'incompatible' request (like scan or remain-on-channel for this driver) will just cancel the scheduled scan. Instead our driver relies on userspace cancelling it, thus breaking existing wpa_s versions. Cc: stable@vger.kernel.org [3.13] Fixes: 35a000b7c1bb ("iwlwifi: mvm: support sched scan if supported by the fw") Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index c49b507..6bf9766 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -246,7 +246,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) else hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) { + if (0 && mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) { hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX; hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES; -- cgit v0.10.2 From b900a87b2eb90c0b9586496c82a323a1b8832d73 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 23 Jan 2014 11:55:16 +0200 Subject: iwlwifi: mvm: print the version of the firmware when it asserts This can be useful to be able to spot the firmware version from the error reports without needing to fetch it from another place. Cc: [3.10+] Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c index a4a5e25..86989df 100644 --- a/drivers/net/wireless/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/iwlwifi/mvm/utils.c @@ -411,6 +411,8 @@ void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm) mvm->status, table.valid); } + IWL_ERR(mvm, "Loaded firmware version: %s\n", mvm->fw->fw_version); + trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low, table.data1, table.data2, table.data3, table.blink1, table.blink2, table.ilink1, -- cgit v0.10.2 From f7690915ccce98553c5425b51e6b5a6c51e27f4e Mon Sep 17 00:00:00 2001 From: Oren Givon Date: Thu, 23 Jan 2014 01:19:33 +0200 Subject: iwlwifi: add more 7265 HW IDs Add 6 new HW IDs for the 7265 series. Cc: [3.13] Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 3040924..f47bcbe 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -359,20 +359,25 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 7265 Series */ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5112, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5100, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x510A, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5310, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5302, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5210, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)}, - {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2n_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5200, iwl7265_2n_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5002, iwl7265_n_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)}, -- cgit v0.10.2 From 6e0bbe5ee845e185d237ec4f266b7be495c50eb6 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Mon, 30 Dec 2013 09:59:45 +0200 Subject: iwlwifi: mvm: notify match found without filtering Configure scheduled scan to notify match found on every beacon or probe response if the scan request doesn't contain valid ssid list for filtering. Without this configuration the FW passes all beacons to the host but doesn't notify the stack that the scan results are ready for processing. Signed-off-by: David Spinadel Reviewed-by: Alexander Bondar Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 73cbba7..9426905 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -504,6 +504,7 @@ struct iwl_scan_offload_profile { * @match_notify: clients waiting for match found notification * @pass_match: clients waiting for the results * @active_clients: active clients bitmap - enum scan_framework_client + * @any_beacon_notify: clients waiting for match notification without match */ struct iwl_scan_offload_profile_cfg { struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES]; @@ -512,7 +513,8 @@ struct iwl_scan_offload_profile_cfg { u8 match_notify; u8 pass_match; u8 active_clients; - u8 reserved[3]; + u8 any_beacon_notify; + u8 reserved[2]; } __packed; /** diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 0e00079..c35f35c 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -807,6 +807,8 @@ int iwl_mvm_config_sched_scan_profiles(struct iwl_mvm *mvm, profile_cfg->active_clients = SCAN_CLIENT_SCHED_SCAN; profile_cfg->pass_match = SCAN_CLIENT_SCHED_SCAN; profile_cfg->match_notify = SCAN_CLIENT_SCHED_SCAN; + if (!req->n_match_sets || !req->match_sets[0].ssid.ssid_len) + profile_cfg->any_beacon_notify = SCAN_CLIENT_SCHED_SCAN; for (i = 0; i < req->n_match_sets; i++) { profile = &profile_cfg->profiles[i]; -- cgit v0.10.2 From 9bb0c1adc52ca3c7026811a6630a3c78eec1f135 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 20 Jan 2014 15:21:26 +0200 Subject: iwlwifi: mvm: don't leak a station when we drain We had a bug that prevented us from removing a station after we entered the drain flow: We assign sta to be NULL if it was an error value. Then we tested it against -EBUSY, but forget to retrieve the value again from mvm->fw_id_to_mac_id[sta_id]. Due to this bug, we ended up never removing the STA from the firmware. This led to an firmware assert when we remove the GO vif. Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 90378c2..4df12fa 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -659,8 +659,14 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, rcu_read_lock(); sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + /* + * sta can't be NULL otherwise it'd mean that the sta has been freed in + * the firmware while we still have packets for it in the Tx queues. + */ + if (WARN_ON_ONCE(!sta)) + goto out; - if (!IS_ERR_OR_NULL(sta)) { + if (!IS_ERR(sta)) { mvmsta = iwl_mvm_sta_from_mac80211(sta); if (tid != IWL_TID_NON_QOS) { @@ -675,7 +681,6 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, spin_unlock_bh(&mvmsta->lock); } } else { - sta = NULL; mvmsta = NULL; } @@ -683,42 +688,38 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, * If the txq is not an AMPDU queue, there is no chance we freed * several skbs. Check that out... */ - if (txq_id < mvm->first_agg_queue && !WARN_ON(skb_freed > 1) && - atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) { - if (mvmsta) { - /* - * If there are no pending frames for this STA, notify - * mac80211 that this station can go to sleep in its - * STA table. - */ - if (mvmsta->vif->type == NL80211_IFTYPE_AP) - ieee80211_sta_block_awake(mvm->hw, sta, false); - /* - * We might very well have taken mvmsta pointer while - * the station was being removed. The remove flow might - * have seen a pending_frame (because we didn't take - * the lock) even if now the queues are drained. So make - * really sure now that this the station is not being - * removed. If it is, run the drain worker to remove it. - */ - spin_lock_bh(&mvmsta->lock); - sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); - if (!sta || PTR_ERR(sta) == -EBUSY) { - /* - * Station disappeared in the meantime: - * so we are draining. - */ - set_bit(sta_id, mvm->sta_drained); - schedule_work(&mvm->sta_drained_wk); - } - spin_unlock_bh(&mvmsta->lock); - } else if (!mvmsta && PTR_ERR(sta) == -EBUSY) { - /* Tx response without STA, so we are draining */ - set_bit(sta_id, mvm->sta_drained); - schedule_work(&mvm->sta_drained_wk); - } + if (txq_id >= mvm->first_agg_queue) + goto out; + + /* We can't free more than one frame at once on a shared queue */ + WARN_ON(skb_freed > 1); + + /* If we have still frames from this STA nothing to do here */ + if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) + goto out; + + if (mvmsta && mvmsta->vif->type == NL80211_IFTYPE_AP) { + /* + * If there are no pending frames for this STA, notify + * mac80211 that this station can go to sleep in its + * STA table. + * If mvmsta is not NULL, sta is valid. + */ + ieee80211_sta_block_awake(mvm->hw, sta, false); + } + + if (PTR_ERR(sta) == -EBUSY || PTR_ERR(sta) == -ENOENT) { + /* + * We are draining and this was the last packet - pre_rcu_remove + * has been called already. We might be after the + * synchronize_net already. + * Don't rely on iwl_mvm_rm_sta to see the empty Tx queues. + */ + set_bit(sta_id, mvm->sta_drained); + schedule_work(&mvm->sta_drained_wk); } +out: rcu_read_unlock(); } -- cgit v0.10.2 From 8e2a866ef214af4e104ec8d593e3269d8fe66d19 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 28 Jan 2014 12:27:31 +0200 Subject: iwlwifi: mvm: BT Coex - disable BT when TXing probe request in scan Not doing so will let BT kill our probe requests leading to failures in scan. Cc: [3.10+] Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index c35f35c..742afc4 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -344,7 +344,8 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm, iwl_mvm_scan_fill_ssids(cmd, req, basic_ssid ? 1 : 0); - cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL); + cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL | + TX_CMD_FLG_BT_DIS); cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id; cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); cmd->tx_cmd.rate_n_flags = -- cgit v0.10.2 From c512865446e6dd5b6e91e81187e75b734ad7cfc7 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 5 Dec 2013 22:42:55 +0200 Subject: iwlwifi: mvm: don't allow A band if SKU forbids it The driver wasn't reading the NVM properly. While this didn't lead to any issue until now, it seems that there is an old version of the NVM in the wild. In this version, the A band channels appear to be valid but the SKU capabilities (another field of the NVM) says that A band isn't supported at all. With this specific version of the NVM, the driver would think that A band is supported while the HW / firmware don't. This leads to asserts. Cc: [3.10+] Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index f06f4cb..725e954d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -182,6 +182,11 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, for (ch_idx = 0; ch_idx < IWL_NUM_CHANNELS; ch_idx++) { ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx); + + if (ch_idx >= NUM_2GHZ_CHANNELS && + !data->sku_cap_band_52GHz_enable) + ch_flags &= ~NVM_CHANNEL_VALID; + if (!(ch_flags & NVM_CHANNEL_VALID)) { IWL_DEBUG_EEPROM(dev, "Ch. %d Flags %x [%sGHz] - No traffic\n", -- cgit v0.10.2 From 2fa4cb905605c863bf570027233af7afd8149ae4 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 28 Jan 2014 09:14:48 +0100 Subject: ath9k_htc: make ->sta_rc_update atomic for most calls sta_rc_update() callback must be atomic, hence we can not take mutexes or do other operations, which can sleep in ath9k_htc_sta_rc_update(). I think we can just return from ath9k_htc_sta_rc_update(), if it is called without IEEE80211_RC_SUPP_RATES_CHANGED bit. That will help with scheduling while atomic bug for most cases (except mesh and IBSS modes). For mesh and IBSS I do not see other solution like creating additional workqueue, because sending firmware command require us to sleep, but this can be done in additional patch. Patch partially fixes bug: https://bugzilla.redhat.com/show_bug.cgi?id=990955 Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 608d739..a57af9b 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1315,21 +1315,22 @@ static void ath9k_htc_sta_rc_update(struct ieee80211_hw *hw, struct ath_common *common = ath9k_hw_common(priv->ah); struct ath9k_htc_target_rate trate; + if (!(changed & IEEE80211_RC_SUPP_RATES_CHANGED)) + return; + mutex_lock(&priv->mutex); ath9k_htc_ps_wakeup(priv); - if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) { - memset(&trate, 0, sizeof(struct ath9k_htc_target_rate)); - ath9k_htc_setup_rate(priv, sta, &trate); - if (!ath9k_htc_send_rate_cmd(priv, &trate)) - ath_dbg(common, CONFIG, - "Supported rates for sta: %pM updated, rate caps: 0x%X\n", - sta->addr, be32_to_cpu(trate.capflags)); - else - ath_dbg(common, CONFIG, - "Unable to update supported rates for sta: %pM\n", - sta->addr); - } + memset(&trate, 0, sizeof(struct ath9k_htc_target_rate)); + ath9k_htc_setup_rate(priv, sta, &trate); + if (!ath9k_htc_send_rate_cmd(priv, &trate)) + ath_dbg(common, CONFIG, + "Supported rates for sta: %pM updated, rate caps: 0x%X\n", + sta->addr, be32_to_cpu(trate.capflags)); + else + ath_dbg(common, CONFIG, + "Unable to update supported rates for sta: %pM\n", + sta->addr); ath9k_htc_ps_restore(priv); mutex_unlock(&priv->mutex); -- cgit v0.10.2 From 58e33a219298c5ba0f88ce9a7d0f448eb3ae884a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 29 Jan 2014 17:42:37 +0100 Subject: rt2800: disable PS by default on USB We have disabled it currently on other buses. PS can cause some issues, not necessarily with our driver but on AP, that are not easy to debug. Since behaviour differs on rt2800usb and rt2800pci, user usually blame for malfunction rt2800usb driver, whereas issue is on AP side. Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index b8f5b06..7f8b5d1 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -7458,10 +7458,9 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) u32 reg; /* - * Disable powersaving as default on PCI devices. + * Disable powersaving as default. */ - if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) - rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; /* * Initialize all hw fields. -- cgit v0.10.2 From 8b0df00fe650197ac47c42ba71b2588334a529be Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 29 Jan 2014 17:54:17 +0100 Subject: rt2500: disable PS by default It is know that PS cause issues on that old devices, disable it by default. Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index abc5f56..2f1cd92 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1877,6 +1877,11 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 9f16824..d849d59 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1706,6 +1706,11 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; + /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, -- cgit v0.10.2 From 6bca610d97b6139a1d7598b8009da9d339daa50f Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Thu, 30 Jan 2014 09:14:53 +0100 Subject: ath9k_htc: Do not support PowerSave by default It is a copy/paste of patch provided by Sujith for ath9k. "Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter." Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index f4e1de2..c57d6b8 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -34,6 +34,10 @@ static int ath9k_htc_btcoex_enable; module_param_named(btcoex_enable, ath9k_htc_btcoex_enable, int, 0444); MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); +static int ath9k_ps_enable; +module_param_named(ps_enable, ath9k_ps_enable, int, 0444); +MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave"); + #define CHAN2G(_freq, _idx) { \ .center_freq = (_freq), \ .hw_value = (_idx), \ @@ -725,12 +729,14 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv, IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_HAS_RATE_CONTROL | IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + if (ath9k_ps_enable) + hw->flags |= IEEE80211_HW_SUPPORTS_PS; + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | -- cgit v0.10.2 From 4fcfc7443d072582b5047b8b391d711590e5645c Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Sun, 2 Feb 2014 10:55:18 +0100 Subject: ar5523: fix usb id for Gigaset. Raw id and FW id should be switched. Tested-by: Oleksij Rempel Signed-off-by: Oleksij Rempel Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c index 8aa20df..507d9a9 100644 --- a/drivers/net/wireless/ath/ar5523/ar5523.c +++ b/drivers/net/wireless/ath/ar5523/ar5523.c @@ -1764,7 +1764,7 @@ static struct usb_device_id ar5523_id_table[] = { AR5523_DEVICE_UG(0x07d1, 0x3a07), /* D-Link / WUA-2340 rev A1 */ AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */ AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */ - AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108 + AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108 (CyberTAN Technology) */ AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */ AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */ -- cgit v0.10.2 From a243de48558397f438e299178cac29f6da8fc0ce Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 3 Feb 2014 11:45:51 +0100 Subject: ath9k_htc: avoid scheduling while atomic on sta_rc_update mac80211 ->sta_rc_update() callback must be atomic. Since we have to take mutex and do other operations that can sleep when sending fimrware commands to device, the only option to satisfy atomicity requirement of ->sta_rc_update(), that I can see, is introduce work_struct and defer uploading new rates to that work. Tested-by: Oleksij Rempel Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index 58da346..99a2031 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -262,6 +262,8 @@ enum tid_aggr_state { struct ath9k_htc_sta { u8 index; enum tid_aggr_state tid_state[ATH9K_HTC_MAX_TID]; + struct work_struct rc_update_work; + struct ath9k_htc_priv *htc_priv; }; #define ATH9K_HTC_RXBUF 256 diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index a57af9b..c9254a6 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1270,18 +1270,50 @@ static void ath9k_htc_configure_filter(struct ieee80211_hw *hw, mutex_unlock(&priv->mutex); } +static void ath9k_htc_sta_rc_update_work(struct work_struct *work) +{ + struct ath9k_htc_sta *ista = + container_of(work, struct ath9k_htc_sta, rc_update_work); + struct ieee80211_sta *sta = + container_of((void *)ista, struct ieee80211_sta, drv_priv); + struct ath9k_htc_priv *priv = ista->htc_priv; + struct ath_common *common = ath9k_hw_common(priv->ah); + struct ath9k_htc_target_rate trate; + + mutex_lock(&priv->mutex); + ath9k_htc_ps_wakeup(priv); + + memset(&trate, 0, sizeof(struct ath9k_htc_target_rate)); + ath9k_htc_setup_rate(priv, sta, &trate); + if (!ath9k_htc_send_rate_cmd(priv, &trate)) + ath_dbg(common, CONFIG, + "Supported rates for sta: %pM updated, rate caps: 0x%X\n", + sta->addr, be32_to_cpu(trate.capflags)); + else + ath_dbg(common, CONFIG, + "Unable to update supported rates for sta: %pM\n", + sta->addr); + + ath9k_htc_ps_restore(priv); + mutex_unlock(&priv->mutex); +} + static int ath9k_htc_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta) { struct ath9k_htc_priv *priv = hw->priv; + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; int ret; mutex_lock(&priv->mutex); ath9k_htc_ps_wakeup(priv); ret = ath9k_htc_add_station(priv, vif, sta); - if (!ret) + if (!ret) { + INIT_WORK(&ista->rc_update_work, ath9k_htc_sta_rc_update_work); + ista->htc_priv = priv; ath9k_htc_init_rate(priv, sta); + } ath9k_htc_ps_restore(priv); mutex_unlock(&priv->mutex); @@ -1293,12 +1325,13 @@ static int ath9k_htc_sta_remove(struct ieee80211_hw *hw, struct ieee80211_sta *sta) { struct ath9k_htc_priv *priv = hw->priv; - struct ath9k_htc_sta *ista; + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; int ret; + cancel_work_sync(&ista->rc_update_work); + mutex_lock(&priv->mutex); ath9k_htc_ps_wakeup(priv); - ista = (struct ath9k_htc_sta *) sta->drv_priv; htc_sta_drain(priv->htc, ista->index); ret = ath9k_htc_remove_station(priv, vif, sta); ath9k_htc_ps_restore(priv); @@ -1311,29 +1344,12 @@ static void ath9k_htc_sta_rc_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u32 changed) { - struct ath9k_htc_priv *priv = hw->priv; - struct ath_common *common = ath9k_hw_common(priv->ah); - struct ath9k_htc_target_rate trate; + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; if (!(changed & IEEE80211_RC_SUPP_RATES_CHANGED)) return; - mutex_lock(&priv->mutex); - ath9k_htc_ps_wakeup(priv); - - memset(&trate, 0, sizeof(struct ath9k_htc_target_rate)); - ath9k_htc_setup_rate(priv, sta, &trate); - if (!ath9k_htc_send_rate_cmd(priv, &trate)) - ath_dbg(common, CONFIG, - "Supported rates for sta: %pM updated, rate caps: 0x%X\n", - sta->addr, be32_to_cpu(trate.capflags)); - else - ath_dbg(common, CONFIG, - "Unable to update supported rates for sta: %pM\n", - sta->addr); - - ath9k_htc_ps_restore(priv); - mutex_unlock(&priv->mutex); + schedule_work(&ista->rc_update_work); } static int ath9k_htc_conf_tx(struct ieee80211_hw *hw, -- cgit v0.10.2 From 3683a07b29d2bddebb903f1400860c77d8e423f3 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 4 Feb 2014 08:37:52 +0530 Subject: ath9k: Fix build error on ARM Use mdelay instead of udelay to fix this error: ERROR: "__bad_udelay" [drivers/net/wireless/ath/ath9k/ath9k_hw.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Reported-by: Josh Boyer Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index fbf43c0..11eab9f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1316,7 +1316,7 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type) if (AR_SREV_9300_20_OR_LATER(ah)) udelay(50); else if (AR_SREV_9100(ah)) - udelay(10000); + mdelay(10); else udelay(100); @@ -2051,9 +2051,8 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah) REG_SET_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN); - if (AR_SREV_9100(ah)) - udelay(10000); + mdelay(10); else udelay(50); -- cgit v0.10.2 From 8298383c2cd5a6d0639f1bb1781fba181bd20154 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 4 Feb 2014 08:37:53 +0530 Subject: ath9k: Do not support PowerSave by default Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index c36de30..1fc2e5a 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -57,6 +57,10 @@ static int ath9k_bt_ant_diversity; module_param_named(bt_ant_diversity, ath9k_bt_ant_diversity, int, 0444); MODULE_PARM_DESC(bt_ant_diversity, "Enable WLAN/BT RX antenna diversity"); +static int ath9k_ps_enable; +module_param_named(ps_enable, ath9k_ps_enable, int, 0444); +MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave"); + bool is_ath9k_unloaded; /* We use the hw_value as an index into our private channel structure */ @@ -903,13 +907,15 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_RC_TABLE | IEEE80211_HW_SUPPORTS_HT_CCK_RATES; + if (ath9k_ps_enable) + hw->flags |= IEEE80211_HW_SUPPORTS_PS; + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; -- cgit v0.10.2 From 4cfe9a8d58292dc8e32a8093a95187d47507d394 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 4 Feb 2014 08:37:54 +0530 Subject: ath9k: Fix TX power calculation The commit, "ath9k_hw: Fix incorrect Tx control power in AR9003 template" fixed the incorrect values in the eeprom templates, but if boards have already been calibrated with incorrect values, they would still be using the wrong TX power. Fix this by assigning a default value in such cases. Cc: Rajkumar Manoharan Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 25243cb..b8daff7 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -5065,6 +5065,10 @@ static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep, break; } } + + if (is2GHz && !twiceMaxEdgePower) + twiceMaxEdgePower = 60; + return twiceMaxEdgePower; } -- cgit v0.10.2 From 2f617435c3a6fe3f39efb9ae2baa77de2d6c97b8 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Sun, 12 Jan 2014 11:06:37 +0200 Subject: mac80211: move roc cookie assignment earlier ieee80211_start_roc_work() might add a new roc to existing roc, and tell cfg80211 it has already started. However, this might happen before the roc cookie was set, resulting in REMAIN_ON_CHANNEL (started) event with null cookie. Consequently, it can make wpa_supplicant go out of sync. Fix it by setting the roc cookie earlier. Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f9ae9b8..94b4acb 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2638,6 +2638,24 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work); INIT_LIST_HEAD(&roc->dependents); + /* + * cookie is either the roc cookie (for normal roc) + * or the SKB (for mgmt TX) + */ + if (!txskb) { + /* local->mtx protects this */ + local->roc_cookie_counter++; + roc->cookie = local->roc_cookie_counter; + /* wow, you wrapped 64 bits ... more likely a bug */ + if (WARN_ON(roc->cookie == 0)) { + roc->cookie = 1; + local->roc_cookie_counter++; + } + *cookie = roc->cookie; + } else { + *cookie = (unsigned long)txskb; + } + /* if there's one pending or we're scanning, queue this one */ if (!list_empty(&local->roc_list) || local->scanning || local->radar_detect_enabled) @@ -2772,24 +2790,6 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, if (!queued) list_add_tail(&roc->list, &local->roc_list); - /* - * cookie is either the roc cookie (for normal roc) - * or the SKB (for mgmt TX) - */ - if (!txskb) { - /* local->mtx protects this */ - local->roc_cookie_counter++; - roc->cookie = local->roc_cookie_counter; - /* wow, you wrapped 64 bits ... more likely a bug */ - if (WARN_ON(roc->cookie == 0)) { - roc->cookie = 1; - local->roc_cookie_counter++; - } - *cookie = roc->cookie; - } else { - *cookie = (unsigned long)txskb; - } - return 0; } -- cgit v0.10.2 From f12cb2893069495726c21a4b0178705dacfecfe0 Mon Sep 17 00:00:00 2001 From: Pontus Fuchs Date: Thu, 16 Jan 2014 15:00:40 +0100 Subject: nl80211: Reset split_start when netlink skb is exhausted When the netlink skb is exhausted split_start is left set. In the subsequent retry, with a larger buffer, the dump is continued from the failing point instead of from the beginning. This was causing my rt28xx based USB dongle to now show up when running "iw list" with an old iw version without split dump support. Cc: stable@vger.kernel.org Fixes: 3713b4e364ef ("nl80211: allow splitting wiphy information in dumps") Signed-off-by: Pontus Fuchs [avoid the entire workaround when state->split is set] Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7a74259..6ea960b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1719,9 +1719,10 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb) * We can then retry with the larger buffer. */ if ((ret == -ENOBUFS || ret == -EMSGSIZE) && - !skb->len && + !skb->len && !state->split && cb->min_dump_alloc < 4096) { cb->min_dump_alloc = 4096; + state->split_start = 0; rtnl_unlock(); return 1; } -- cgit v0.10.2 From 5a6aa705ffdd97552ff756bbfa7d5a3b62a6c690 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Jan 2014 16:32:29 +0100 Subject: cfg80211: re-enable 5/10 MHz support Unfortunately I forgot this during the merge window, but the patch seems small enough to go in as a fix. The userspace API bug that was the reason for disabling it has long been fixed. Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index d89dee2..77fe4c7 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -440,9 +440,6 @@ int wiphy_register(struct wiphy *wiphy) int i; u16 ifmodes = wiphy->interface_modes; - /* support for 5/10 MHz is broken due to nl80211 API mess - disable */ - wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_5_10_MHZ; - /* * There are major locking problems in nl80211/mac80211 for CSA, * disable for all drivers until this has been reworked. -- cgit v0.10.2 From 8ffcc704c963b4157391bd87a4544cdfd18b574d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 23 Jan 2014 14:28:16 +0200 Subject: mac80211: avoid deadlock revealed by lockdep MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit sdata->u.ap.request_smps_work can’t be flushed synchronously under wdev_lock(wdev) since ieee80211_request_smps_ap_work itself locks the same lock. While at it, reset the driver_smps_mode when the ap is stopped to its default: OFF. This solves: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0-ipeer+ #2 Tainted: G O ------------------------------------------------------- rmmod/2867 is trying to acquire lock: ((&sdata->u.ap.request_smps_work)){+.+...}, at: [] flush_work+0x0/0x90 but task is already holding lock: (&wdev->mtx){+.+.+.}, at: [] cfg80211_stop_ap+0x26/0x230 [cfg80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&wdev->mtx){+.+.+.}: [] lock_acquire+0x79/0xe0 [] mutex_lock_nested+0x4a/0x360 [] ieee80211_request_smps_ap_work+0x2b/0x50 [mac80211] [] process_one_work+0x198/0x450 [] worker_thread+0xf9/0x320 [] kthread+0x9f/0xb0 [] ret_from_kernel_thread+0x1b/0x28 -> #0 ((&sdata->u.ap.request_smps_work)){+.+...}: [] __lock_acquire+0x183f/0x1910 [] lock_acquire+0x79/0xe0 [] flush_work+0x47/0x90 [] __cancel_work_timer+0x67/0xe0 [] cancel_work_sync+0xf/0x20 [] ieee80211_stop_ap+0x8c/0x340 [mac80211] [] cfg80211_stop_ap+0x8c/0x230 [cfg80211] [] cfg80211_leave+0x79/0x100 [cfg80211] [] cfg80211_netdev_notifier_call+0xf2/0x4f0 [cfg80211] [] notifier_call_chain+0x59/0x130 [] __raw_notifier_call_chain+0x1e/0x30 [] raw_notifier_call_chain+0x1f/0x30 [] call_netdevice_notifiers_info+0x33/0x70 [] call_netdevice_notifiers+0x13/0x20 [] __dev_close_many+0x34/0xb0 [] dev_close_many+0x6e/0xc0 [] rollback_registered_many+0xa7/0x1f0 [] unregister_netdevice_many+0x14/0x60 [] ieee80211_remove_interfaces+0xe9/0x170 [mac80211] [] ieee80211_unregister_hw+0x56/0x110 [mac80211] [] iwl_op_mode_mvm_stop+0x26/0xe0 [iwlmvm] [] _iwl_op_mode_stop+0x3a/0x70 [iwlwifi] [] iwl_opmode_deregister+0x6f/0x90 [iwlwifi] [] __exit_compat+0xd/0x19 [iwlmvm] [] SyS_delete_module+0x179/0x2b0 [] sysenter_do_call+0x12/0x32 Fixes: 687da132234f ("mac80211: implement SMPS for AP") Cc: [3.13] Reported-by: Ilan Peer Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 94b4acb..33acdca 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1090,8 +1090,6 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) kfree(sdata->u.ap.next_beacon); sdata->u.ap.next_beacon = NULL; - cancel_work_sync(&sdata->u.ap.request_smps_work); - /* turn off carrier for this interface and dependent VLANs */ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) netif_carrier_off(vlan->dev); @@ -1103,6 +1101,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) kfree_rcu(old_beacon, rcu_head); if (old_probe_resp) kfree_rcu(old_probe_resp, rcu_head); + sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF; __sta_info_flush(sdata, true); ieee80211_free_keys(sdata, true); diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index fab7b91..70dd013 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -466,7 +466,9 @@ void ieee80211_request_smps_ap_work(struct work_struct *work) u.ap.request_smps_work); sdata_lock(sdata); - __ieee80211_request_smps_ap(sdata, sdata->u.ap.driver_smps_mode); + if (sdata_dereference(sdata->u.ap.beacon, sdata)) + __ieee80211_request_smps_ap(sdata, + sdata->u.ap.driver_smps_mode); sdata_unlock(sdata); } diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 3dfd20a..ae2eb14 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -770,12 +770,19 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, ieee80211_roc_purge(local, sdata); - if (sdata->vif.type == NL80211_IFTYPE_STATION) + switch (sdata->vif.type) { + case NL80211_IFTYPE_STATION: ieee80211_mgd_stop(sdata); - - if (sdata->vif.type == NL80211_IFTYPE_ADHOC) + break; + case NL80211_IFTYPE_ADHOC: ieee80211_ibss_stop(sdata); - + break; + case NL80211_IFTYPE_AP: + cancel_work_sync(&sdata->u.ap.request_smps_work); + break; + default: + break; + } /* * Remove all stations associated with this interface. -- cgit v0.10.2 From a617302c531eaf497ccd02a61d380efc119ba999 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 22 Jan 2014 11:14:18 +0200 Subject: cfg80211: fix scan done race When an interface/wdev is removed, any ongoing scan should be cancelled by the driver. This will make it call cfg80211, which only queues a work struct. If interface/wdev removal is quick enough, this can leave the scan request pending and processed only after the interface is gone, causing a use-after-free. Fix this by making sure the scan request is not pending after the interface is destroyed. We can't flush or cancel the work item due to locking concerns, but when it'll run it shouldn't find anything to do. This leaves a potential issue, if a new scan gets requested before the work runs, it prematurely stops the running scan, potentially causing another crash. I'll fix that in the next patch. This was particularly observed with P2P_DEVICE wdevs, likely because freeing them is quicker than freeing netdevs. Reported-by: Andrei Otcheretianski Fixes: 4a58e7c38443 ("cfg80211: don't "leak" uncompleted scans") Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index 77fe4c7..02ed00d 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -203,8 +203,11 @@ void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, rdev->opencount--; - WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev && - !rdev->scan_req->notified); + if (rdev->scan_req && rdev->scan_req->wdev == wdev) { + if (WARN_ON(!rdev->scan_req->notified)) + rdev->scan_req->aborted = true; + ___cfg80211_scan_done(rdev); + } } static int cfg80211_rfkill_set_block(void *data, bool blocked) @@ -856,8 +859,11 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, break; case NETDEV_DOWN: cfg80211_update_iface_num(rdev, wdev->iftype, -1); - WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev && - !rdev->scan_req->notified); + if (rdev->scan_req && rdev->scan_req->wdev == wdev) { + if (WARN_ON(!rdev->scan_req->notified)) + rdev->scan_req->aborted = true; + ___cfg80211_scan_done(rdev); + } if (WARN_ON(rdev->sched_scan_req && rdev->sched_scan_req->dev == wdev->netdev)) { -- cgit v0.10.2 From f9d15d162b3acf28f85b3ac05c4883e5ed588d28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 22 Jan 2014 11:14:19 +0200 Subject: cfg80211: send scan results from work queue Due to the previous commit, when a scan finishes, it is in theory possible to hit the following sequence: 1. interface starts being removed 2. scan is cancelled by driver and cfg80211 is notified 3. scan done work is scheduled 4. interface is removed completely, rdev->scan_req is freed, event sent to userspace but scan done work remains pending 5. new scan is requested on another virtual interface 6. scan done work runs, freeing the still-running scan To fix this situation, hang on to the scan done message and block new scans while that is the case, and only send the message from the work function, regardless of whether the scan_req is already freed from interface removal. This makes step 5 above impossible and changes step 6 to be 5. scan done work runs, sending the scan done message As this can't work for wext, so we send the message immediately, but this shouldn't be an issue since we still return -EBUSY. Signed-off-by: Johannes Berg diff --git a/net/wireless/core.c b/net/wireless/core.c index 02ed00d..010892b 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -206,7 +206,7 @@ void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, if (rdev->scan_req && rdev->scan_req->wdev == wdev) { if (WARN_ON(!rdev->scan_req->notified)) rdev->scan_req->aborted = true; - ___cfg80211_scan_done(rdev); + ___cfg80211_scan_done(rdev, false); } } @@ -862,7 +862,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, if (rdev->scan_req && rdev->scan_req->wdev == wdev) { if (WARN_ON(!rdev->scan_req->notified)) rdev->scan_req->aborted = true; - ___cfg80211_scan_done(rdev); + ___cfg80211_scan_done(rdev, false); } if (WARN_ON(rdev->sched_scan_req && diff --git a/net/wireless/core.h b/net/wireless/core.h index 37ec16d..f1d193b 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -62,6 +62,7 @@ struct cfg80211_registered_device { struct rb_root bss_tree; u32 bss_generation; struct cfg80211_scan_request *scan_req; /* protected by RTNL */ + struct sk_buff *scan_msg; struct cfg80211_sched_scan_request *sched_scan_req; unsigned long suspend_at; struct work_struct scan_done_wk; @@ -361,7 +362,8 @@ int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, struct key_params *params, int key_idx, bool pairwise, const u8 *mac_addr); void __cfg80211_scan_done(struct work_struct *wk); -void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev); +void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, + bool send_message); void __cfg80211_sched_scan_results(struct work_struct *wk); int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, bool driver_initiated); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 6ea960b..4fe2e6e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5245,7 +5245,7 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) if (!rdev->ops->scan) return -EOPNOTSUPP; - if (rdev->scan_req) { + if (rdev->scan_req || rdev->scan_msg) { err = -EBUSY; goto unlock; } @@ -10012,40 +10012,31 @@ void nl80211_send_scan_start(struct cfg80211_registered_device *rdev, NL80211_MCGRP_SCAN, GFP_KERNEL); } -void nl80211_send_scan_done(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev) +struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev, bool aborted) { struct sk_buff *msg; msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (!msg) - return; + return NULL; if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0, - NL80211_CMD_NEW_SCAN_RESULTS) < 0) { + aborted ? NL80211_CMD_SCAN_ABORTED : + NL80211_CMD_NEW_SCAN_RESULTS) < 0) { nlmsg_free(msg); - return; + return NULL; } - genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0, - NL80211_MCGRP_SCAN, GFP_KERNEL); + return msg; } -void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev) +void nl80211_send_scan_result(struct cfg80211_registered_device *rdev, + struct sk_buff *msg) { - struct sk_buff *msg; - - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (!msg) return; - if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0, - NL80211_CMD_SCAN_ABORTED) < 0) { - nlmsg_free(msg); - return; - } - genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0, NL80211_MCGRP_SCAN, GFP_KERNEL); } diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h index b1b2313..7579974 100644 --- a/net/wireless/nl80211.h +++ b/net/wireless/nl80211.h @@ -8,10 +8,10 @@ void nl80211_exit(void); void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev); void nl80211_send_scan_start(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev); -void nl80211_send_scan_done(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev); -void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev, - struct wireless_dev *wdev); +struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev, bool aborted); +void nl80211_send_scan_result(struct cfg80211_registered_device *rdev, + struct sk_buff *msg); void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev, struct net_device *netdev, u32 cmd); void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev, diff --git a/net/wireless/scan.c b/net/wireless/scan.c index b528e31..d1ed4ae 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -161,18 +161,25 @@ static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, dev->bss_generation++; } -void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev) +void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, + bool send_message) { struct cfg80211_scan_request *request; struct wireless_dev *wdev; + struct sk_buff *msg; #ifdef CONFIG_CFG80211_WEXT union iwreq_data wrqu; #endif ASSERT_RTNL(); - request = rdev->scan_req; + if (rdev->scan_msg) { + nl80211_send_scan_result(rdev, rdev->scan_msg); + rdev->scan_msg = NULL; + return; + } + request = rdev->scan_req; if (!request) return; @@ -186,18 +193,16 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev) if (wdev->netdev) cfg80211_sme_scan_done(wdev->netdev); - if (request->aborted) { - nl80211_send_scan_aborted(rdev, wdev); - } else { - if (request->flags & NL80211_SCAN_FLAG_FLUSH) { - /* flush entries from previous scans */ - spin_lock_bh(&rdev->bss_lock); - __cfg80211_bss_expire(rdev, request->scan_start); - spin_unlock_bh(&rdev->bss_lock); - } - nl80211_send_scan_done(rdev, wdev); + if (!request->aborted && + request->flags & NL80211_SCAN_FLAG_FLUSH) { + /* flush entries from previous scans */ + spin_lock_bh(&rdev->bss_lock); + __cfg80211_bss_expire(rdev, request->scan_start); + spin_unlock_bh(&rdev->bss_lock); } + msg = nl80211_build_scan_msg(rdev, wdev, request->aborted); + #ifdef CONFIG_CFG80211_WEXT if (wdev->netdev && !request->aborted) { memset(&wrqu, 0, sizeof(wrqu)); @@ -211,6 +216,11 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev) rdev->scan_req = NULL; kfree(request); + + if (!send_message) + rdev->scan_msg = msg; + else + nl80211_send_scan_result(rdev, msg); } void __cfg80211_scan_done(struct work_struct *wk) @@ -221,7 +231,7 @@ void __cfg80211_scan_done(struct work_struct *wk) scan_done_wk); rtnl_lock(); - ___cfg80211_scan_done(rdev); + ___cfg80211_scan_done(rdev, true); rtnl_unlock(); } @@ -1079,7 +1089,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, if (IS_ERR(rdev)) return PTR_ERR(rdev); - if (rdev->scan_req) { + if (rdev->scan_req || rdev->scan_msg) { err = -EBUSY; goto out; } @@ -1481,7 +1491,7 @@ int cfg80211_wext_giwscan(struct net_device *dev, if (IS_ERR(rdev)) return PTR_ERR(rdev); - if (rdev->scan_req) + if (rdev->scan_req || rdev->scan_msg) return -EAGAIN; res = ieee80211_scan_results(rdev, info, extra, data->length); diff --git a/net/wireless/sme.c b/net/wireless/sme.c index a635091..f04d4c3 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -67,7 +67,7 @@ static int cfg80211_conn_scan(struct wireless_dev *wdev) ASSERT_RDEV_LOCK(rdev); ASSERT_WDEV_LOCK(wdev); - if (rdev->scan_req) + if (rdev->scan_req || rdev->scan_msg) return -EBUSY; if (wdev->conn->params.channel) -- cgit v0.10.2 From 0297ea17bf7879fb5846fafd1be4c0471e72848d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 27 Jan 2014 11:07:42 +0200 Subject: mac80211: release the channel in error path in start_ap When the driver cannot start the AP or when the assignement of the beacon goes wrong, we need to unassign the vif. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 33acdca..453e974 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1021,8 +1021,10 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, IEEE80211_P2P_OPPPS_ENABLE_BIT; err = ieee80211_assign_beacon(sdata, ¶ms->beacon); - if (err < 0) + if (err < 0) { + ieee80211_vif_release_channel(sdata); return err; + } changed |= err; err = drv_start_ap(sdata->local, sdata); @@ -1032,6 +1034,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, if (old) kfree_rcu(old, rcu_head); RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); + ieee80211_vif_release_channel(sdata); return err; } -- cgit v0.10.2 From d4c80d9df6d1e4473b1409e4d220ca3d1612125c Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 30 Jan 2014 14:17:28 +0530 Subject: mac80211: Fix IBSS disconnect Currently, when a station leaves an IBSS network, the corresponding BSS is not dropped from cfg80211 if there are other active stations in the network. But, the small window that is present when trying to determine a station's status based on IEEE80211_IBSS_MERGE_INTERVAL introduces a race. Instead of trying to keep the BSS, always remove it when leaving an IBSS network. There is not much benefit to retain the BSS entry since it will be added with a subsequent join operation. This fixes an issue where a dangling BSS entry causes ath9k to wait for a beacon indefinitely. Cc: Reported-by: Simon Wunderlich Signed-off-by: Sujith Manoharan Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 771080e..2796a19 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -695,12 +695,9 @@ static void ieee80211_ibss_disconnect(struct ieee80211_sub_if_data *sdata) struct cfg80211_bss *cbss; struct beacon_data *presp; struct sta_info *sta; - int active_ibss; u16 capability; - active_ibss = ieee80211_sta_active_ibss(sdata); - - if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) { + if (!is_zero_ether_addr(ifibss->bssid)) { capability = WLAN_CAPABILITY_IBSS; if (ifibss->privacy) -- cgit v0.10.2 From 338f977f4eb441e69bb9a46eaa0ac715c931a67f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 1 Feb 2014 00:16:23 +0100 Subject: mac80211: fix fragmentation code, particularly for encryption The "new" fragmentation code (since my rewrite almost 5 years ago) erroneously sets skb->len rather than using skb_trim() to adjust the length of the first fragment after copying out all the others. This leaves the skb tail pointer pointing to after where the data originally ended, and thus causes the encryption MIC to be written at that point, rather than where it belongs: immediately after the data. The impact of this is that if software encryption is done, then a) encryption doesn't work for the first fragment, the connection becomes unusable as the first fragment will never be properly verified at the receiver, the MIC is practically guaranteed to be wrong b) we leak up to 8 bytes of plaintext (!) of the packet out into the air This is only mitigated by the fact that many devices are capable of doing encryption in hardware, in which case this can't happen as the tail pointer is irrelevant in that case. Additionally, fragmentation is not used very frequently and would normally have to be configured manually. Fix this by using skb_trim() properly. Cc: stable@vger.kernel.org Fixes: 2de8e0d999b8 ("mac80211: rewrite fragmentation") Reported-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 27c990b..97a02d3 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -878,7 +878,7 @@ static int ieee80211_fragment(struct ieee80211_tx_data *tx, } /* adjust first fragment's length */ - skb->len = hdrlen + per_fragm; + skb_trim(skb, hdrlen + per_fragm); return 0; } -- cgit v0.10.2 From fab57a6cc227468ca9e6a4c7ff8d3b10727785ee Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 29 Jan 2014 13:28:02 +0100 Subject: mac80211: fix virtual monitor interface iteration During channel context assignment, the interface should be found by interface iteration, so we need to assign the pointer before the channel context. Reported-by: Emmanuel Grumbach Tested-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ae2eb14..d6d1f1d 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -418,20 +418,24 @@ int ieee80211_add_virtual_monitor(struct ieee80211_local *local) return ret; } + mutex_lock(&local->iflist_mtx); + rcu_assign_pointer(local->monitor_sdata, sdata); + mutex_unlock(&local->iflist_mtx); + mutex_lock(&local->mtx); ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef, IEEE80211_CHANCTX_EXCLUSIVE); mutex_unlock(&local->mtx); if (ret) { + mutex_lock(&local->iflist_mtx); + rcu_assign_pointer(local->monitor_sdata, NULL); + mutex_unlock(&local->iflist_mtx); + synchronize_net(); drv_remove_interface(local, sdata); kfree(sdata); return ret; } - mutex_lock(&local->iflist_mtx); - rcu_assign_pointer(local->monitor_sdata, sdata); - mutex_unlock(&local->iflist_mtx); - return 0; } -- cgit v0.10.2 From 2b4db05e7e2f1efc71e36a9dc1adf5ba164a2330 Mon Sep 17 00:00:00 2001 From: "andrea.merello" Date: Wed, 5 Feb 2014 22:38:05 +0100 Subject: rtl8180: Add error check for pci_map_single return value in RX path In original code the old RX DMA buffer is unmapped and processed and at the end of the isr a new buffer is mapped with pci_map_single and attached to the RX descriptor. If pci_map_single fails then the RX descriptor remains with no valid DMA buffer attached. In this condition the DMA will target where it shouldn't with obvious evil consequences. Simply avoiding re-arming the descriptor will prevent buggy DMA but it will result soon in RX stuck. This patch move the DMA mapping of the new buffer at the beginning of the ISR (and it adds error check for pci_map_single success/fail). If the DMA mapping fails then we do not unmap the old buffer and we re-arm the descriptor without processing it, with the old DMA buffer still attached. In this way we lose the currently RX-ed packet, but whenever next calls to pci_map_single will succeed again,then the RX process will go on without stuck. Signed-off-by: andrea merello Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index 8ec17aa..fad616a 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -107,6 +107,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) struct rtl8180_priv *priv = dev->priv; unsigned int count = 32; u8 signal, agc, sq; + dma_addr_t mapping; while (count--) { struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx]; @@ -128,6 +129,17 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) if (unlikely(!new_skb)) goto done; + mapping = pci_map_single(priv->pdev, + skb_tail_pointer(new_skb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + + if (pci_dma_mapping_error(priv->pdev, mapping)) { + kfree_skb(new_skb); + dev_err(&priv->pdev->dev, "RX DMA map error\n"); + + goto done; + } + pci_unmap_single(priv->pdev, *((dma_addr_t *)skb->cb), MAX_RX_SIZE, PCI_DMA_FROMDEVICE); @@ -158,9 +170,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) skb = new_skb; priv->rx_buf[priv->rx_idx] = skb; - *((dma_addr_t *) skb->cb) = - pci_map_single(priv->pdev, skb_tail_pointer(skb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + *((dma_addr_t *) skb->cb) = mapping; } done: -- cgit v0.10.2 From 348f7d4adee97f222e3ad9ff97956ca3793d11c6 Mon Sep 17 00:00:00 2001 From: "andrea.merello" Date: Wed, 5 Feb 2014 22:38:06 +0100 Subject: rtl8180: Add error check for pci_map_single return value in TX path Orignal code will not detect a DMA mapping failure, causing the HW to attempt a DMA from an invalid address. This patch add the error check and eventually simply drops the TX packet if we can't map it for DMA. Signed-off-by: andrea merello Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index fad616a..3867d14 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -276,6 +276,13 @@ static void rtl8180_tx(struct ieee80211_hw *dev, mapping = pci_map_single(priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, mapping)) { + kfree_skb(skb); + dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); + return; + + } + tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | RTL818X_TX_DESC_FLAG_LS | (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | -- cgit v0.10.2