From 9b2396dd1e41657c095d480802020c283ba1a43e Mon Sep 17 00:00:00 2001 From: Duc Dang Date: Fri, 12 Feb 2016 19:39:27 -0800 Subject: Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation This adds the APM X-Gene SLIMpro mailbox device tree node documentation. Signed-off-by: Feng Kan Signed-off-by: Duc Dang Acked-by: Rob Herring Signed-off-by: Jassi Brar diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt new file mode 100644 index 0000000..e46451b --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt @@ -0,0 +1,35 @@ +The APM X-Gene SLIMpro mailbox is used to communicate messages between +the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple +interrupt based door bell mechanism and can exchange simple messages using the +internal registers. + +There are total of 8 interrupts in this mailbox. Each used for an individual +door bell (or mailbox channel). + +Required properties: +- compatible: Should be as "apm,xgene-slimpro-mbox". + +- reg: Contains the mailbox register address range. + +- interrupts: 8 interrupts must be from 0 to 7, interrupt 0 define the + the interrupt for mailbox channel 0 and interrupt 1 for + mailbox channel 1 and so likewise for the reminder. + +- #mbox-cells: only one to specify the mailbox channel number. + +Example: + +Mailbox Node: + mailbox: mailbox@10540000 { + compatible = "apm,xgene-slimpro-mbox"; + reg = <0x0 0x10540000 0x0 0xa000>; + #mbox-cells = <1>; + interrupts = <0x0 0x0 0x4>, + <0x0 0x1 0x4>, + <0x0 0x2 0x4>, + <0x0 0x3 0x4>, + <0x0 0x4 0x4>, + <0x0 0x5 0x4>, + <0x0 0x6 0x4>, + <0x0 0x7 0x4>, + }; -- cgit v0.10.2