From aba20a8295a76310cd062be0736103ba5aee34fa Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 28 Jan 2011 22:08:20 +0000 Subject: sparc32,sun4m: irq, smp files cleanup - drop filename in file header - drop unused includes - add description of sun4m interrupts (from davem) - add KERN_* to printk - fix spaces => tabs - add spaces after reserved words - drop all externs, they are now in header files This is partly based on a patch from: David Miller Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 7f3b97f..3c6657a 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -1,5 +1,5 @@ -/* sun4m_irq.c - * arch/sparc/kernel/sun4m_irq.c: +/* + * sun4m irq support * * djhr: Hacked out of irq.c into a CPU dependent version. * @@ -9,36 +9,92 @@ * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk) */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include #include -#include -#include #include #include #include -#include #include #include #include #include "irq.h" +#include "kernel.h" + +/* Sample sun4m IRQ layout: + * + * 0x22 - Power + * 0x24 - ESP SCSI + * 0x26 - Lance ethernet + * 0x2b - Floppy + * 0x2c - Zilog uart + * 0x32 - SBUS level 0 + * 0x33 - Parallel port, SBUS level 1 + * 0x35 - SBUS level 2 + * 0x37 - SBUS level 3 + * 0x39 - Audio, Graphics card, SBUS level 4 + * 0x3b - SBUS level 5 + * 0x3d - SBUS level 6 + * + * Each interrupt source has a mask bit in the interrupt registers. + * When the mask bit is set, this blocks interrupt deliver. So you + * clear the bit to enable the interrupt. + * + * Interrupts numbered less than 0x10 are software triggered interrupts + * and unused by Linux. + * + * Interrupt level assignment on sun4m: + * + * level source + * ------------------------------------------------------------ + * 1 softint-1 + * 2 softint-2, VME/SBUS level 1 + * 3 softint-3, VME/SBUS level 2 + * 4 softint-4, onboard SCSI + * 5 softint-5, VME/SBUS level 3 + * 6 softint-6, onboard ETHERNET + * 7 softint-7, VME/SBUS level 4 + * 8 softint-8, onboard VIDEO + * 9 softint-9, VME/SBUS level 5, Module Interrupt + * 10 softint-10, system counter/timer + * 11 softint-11, VME/SBUS level 6, Floppy + * 12 softint-12, Keyboard/Mouse, Serial + * 13 softint-13, VME/SBUS level 7, ISDN Audio + * 14 softint-14, per-processor counter/timer + * 15 softint-15, Asynchronous Errors (broadcast) + * + * Each interrupt source is masked distinctly in the sun4m interrupt + * registers. The PIL level alone is therefore ambiguous, since multiple + * interrupt sources map to a single PIL. + * + * This ambiguity is resolved in the 'intr' property for device nodes + * in the OF device tree. Each 'intr' property entry is composed of + * two 32-bit words. The first word is the IRQ priority value, which + * is what we're intersted in. The second word is the IRQ vector, which + * is unused. + * + * The low 4 bits of the IRQ priority indicate the PIL, and the upper + * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20 + * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled. + * + * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI + * whereas a value of 0x33 is SBUS level 2. Here are some sample + * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and + * Tadpole S3 GX systems. + * + * esp: 0x24 onboard ESP SCSI + * le: 0x26 onboard Lance ETHERNET + * p9100: 0x32 SBUS level 1 P9100 video + * bpp: 0x33 SBUS level 2 BPP parallel port device + * DBRI: 0x39 SBUS level 5 DBRI ISDN audio + * SUNW,leo: 0x39 SBUS level 5 LEO video + * pcmcia: 0x3b SBUS level 6 PCMCIA controller + * uctrl: 0x3b SBUS level 6 UCTRL device + * modem: 0x3d SBUS level 7 MODEM + * zs: 0x2c onboard keyboard/mouse/serial + * floppy: 0x2b onboard Floppy + * power: 0x22 onboard power device (XXX unknown mask bit XXX) + */ + struct sun4m_irq_percpu { u32 pending; @@ -61,9 +117,9 @@ struct sun4m_irq_global __iomem *sun4m_irq_global; /* Dave Redman (djhr@tadpole.co.uk) * The sun4m interrupt registers. */ -#define SUN4M_INT_ENABLE 0x80000000 -#define SUN4M_INT_E14 0x00000080 -#define SUN4M_INT_E10 0x00080000 +#define SUN4M_INT_ENABLE 0x80000000 +#define SUN4M_INT_E14 0x00000080 +#define SUN4M_INT_E10 0x00080000 #define SUN4M_HARD_INT(x) (0x000000001 << (x)) #define SUN4M_SOFT_INT(x) (0x000010000 << (x)) @@ -99,59 +155,6 @@ struct sun4m_irq_global __iomem *sun4m_irq_global; #define OBP_INT_LEVEL_SBUS 0x30 #define OBP_INT_LEVEL_VME 0x40 -/* Interrupt level assignment on sun4m: - * - * level source - * ------------------------------------------------------------ - * 1 softint-1 - * 2 softint-2, VME/SBUS level 1 - * 3 softint-3, VME/SBUS level 2 - * 4 softint-4, onboard SCSI - * 5 softint-5, VME/SBUS level 3 - * 6 softint-6, onboard ETHERNET - * 7 softint-7, VME/SBUS level 4 - * 8 softint-8, onboard VIDEO - * 9 softint-9, VME/SBUS level 5, Module Interrupt - * 10 softint-10, system counter/timer - * 11 softint-11, VME/SBUS level 6, Floppy - * 12 softint-12, Keyboard/Mouse, Serial - * 13 softint-13, VME/SBUS level 7, ISDN Audio - * 14 softint-14, per-processor counter/timer - * 15 softint-15, Asynchronous Errors (broadcast) - * - * Each interrupt source is masked distinctly in the sun4m interrupt - * registers. The PIL level alone is therefore ambiguous, since multiple - * interrupt sources map to a single PIL. - * - * This ambiguity is resolved in the 'intr' property for device nodes - * in the OF device tree. Each 'intr' property entry is composed of - * two 32-bit words. The first word is the IRQ priority value, which - * is what we're intersted in. The second word is the IRQ vector, which - * is unused. - * - * The low 4 bits of the IRQ priority indicate the PIL, and the upper - * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20 - * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled. - * - * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI - * whereas a value of 0x33 is SBUS level 2. Here are some sample - * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and - * Tadpole S3 GX systems. - * - * esp: 0x24 onboard ESP SCSI - * le: 0x26 onboard Lance ETHERNET - * p9100: 0x32 SBUS level 1 P9100 video - * bpp: 0x33 SBUS level 2 BPP parallel port device - * DBRI: 0x39 SBUS level 5 DBRI ISDN audio - * SUNW,leo: 0x39 SBUS level 5 LEO video - * pcmcia: 0x3b SBUS level 6 PCMCIA controller - * uctrl: 0x3b SBUS level 6 UCTRL device - * modem: 0x3d SBUS level 7 MODEM - * zs: 0x2c onboard keyboard/mouse/serial - * floppy: 0x2b onboard Floppy - * power: 0x22 onboard power device (XXX unknown mask bit XXX) - */ - static unsigned long irq_mask[0x50] = { /* SMP */ 0, SUN4M_SOFT_INT(1), @@ -193,7 +196,7 @@ static unsigned long irq_mask[0x50] = { static unsigned long sun4m_get_irqmask(unsigned int irq) { unsigned long mask; - + if (irq < 0x50) mask = irq_mask[irq]; else @@ -217,7 +220,7 @@ static void sun4m_disable_irq(unsigned int irq_nr) sbus_writel(mask, &sun4m_irq_global->mask_set); else sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); - local_irq_restore(flags); + local_irq_restore(flags); } static void sun4m_enable_irq(unsigned int irq_nr) @@ -226,17 +229,17 @@ static void sun4m_enable_irq(unsigned int irq_nr) int cpu = smp_processor_id(); /* Dreadful floppy hack. When we use 0x2b instead of - * 0x0b the system blows (it starts to whistle!). - * So we continue to use 0x0b. Fixme ASAP. --P3 - */ - if (irq_nr != 0x0b) { + * 0x0b the system blows (it starts to whistle!). + * So we continue to use 0x0b. Fixme ASAP. --P3 + */ + if (irq_nr != 0x0b) { mask = sun4m_get_irqmask(irq_nr); local_irq_save(flags); if (irq_nr > 15) sbus_writel(mask, &sun4m_irq_global->mask_clear); else sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); - local_irq_restore(flags); + local_irq_restore(flags); } else { local_irq_save(flags); sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear); @@ -260,7 +263,7 @@ static unsigned long cpu_pil_to_imask[16] = { /*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS, /*13*/ SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO, /*14*/ SUN4M_INT_E14, -/*15*/ SUN4M_INT_ERROR +/*15*/ SUN4M_INT_ERROR, }; /* We assume the caller has disabled local interrupts when these are called, @@ -280,12 +283,14 @@ static void sun4m_enable_pil_irq(unsigned int pil) static void sun4m_send_ipi(int cpu, int level) { unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); } static void sun4m_clear_ipi(int cpu, int level) { unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); } @@ -314,7 +319,7 @@ struct sun4m_timer_global { static struct sun4m_timer_global __iomem *timers_global; -#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10) +#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10) unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10); @@ -407,7 +412,6 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) #ifdef CONFIG_SMP { unsigned long flags; - extern unsigned long lvl14_save[4]; struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; /* For SMP we use the level 14 ticker, however the bootup code diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 762d6ee..5cc7dc5 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -1,59 +1,22 @@ -/* sun4m_smp.c: Sparc SUN4M SMP support. +/* + * sun4m SMP support. * * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) */ -#include - -#include -#include -#include -#include #include -#include -#include -#include -#include -#include #include #include #include #include #include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include #include "irq.h" +#include "kernel.h" #define IRQ_CROSS_CALL 15 -extern ctxd_t *srmmu_ctx_table_phys; - -extern volatile unsigned long cpu_callin_map[NR_CPUS]; -extern unsigned char boot_cpu_id; - -extern cpumask_t smp_commenced_mask; - -extern int __smp4m_processor_id(void); - -/*#define SMP_DEBUG*/ - -#ifdef SMP_DEBUG -#define SMP_PRINTK(x) printk x -#else -#define SMP_PRINTK(x) -#endif - static inline unsigned long swap_ulong(volatile unsigned long *ptr, unsigned long val) { @@ -64,7 +27,6 @@ swap_ulong(volatile unsigned long *ptr, unsigned long val) } static void smp_setup_percpu_timer(void); -extern void cpu_probe(void); void __cpuinit smp4m_callin(void) { @@ -96,7 +58,7 @@ void __cpuinit smp4m_callin(void) /* XXX: What's up with all the flushes? */ local_flush_cache_all(); local_flush_tlb_all(); - + cpu_probe(); /* Fix idle thread fields. */ @@ -119,9 +81,6 @@ void __cpuinit smp4m_callin(void) /* * Cycle through the processors asking the PROM to start each one. */ - -extern struct linux_prom_registers smp_penguin_ctable; - void __init smp4m_boot_cpus(void) { smp_setup_percpu_timer(); @@ -130,7 +89,6 @@ void __init smp4m_boot_cpus(void) int __cpuinit smp4m_boot_one_cpu(int i) { - extern unsigned long sun4m_cpu_startup; unsigned long *entry = &sun4m_cpu_startup; struct task_struct *p; int timeout; @@ -142,7 +100,7 @@ int __cpuinit smp4m_boot_one_cpu(int i) p = fork_idle(i); current_set[i] = task_thread_info(p); /* See trampoline.S for details... */ - entry += ((i-1) * 3); + entry += ((i - 1) * 3); /* * Initialize the contexts table @@ -154,20 +112,19 @@ int __cpuinit smp4m_boot_one_cpu(int i) smp_penguin_ctable.reg_size = 0; /* whirrr, whirrr, whirrrrrrrrr... */ - printk("Starting CPU %d at %p\n", i, entry); + printk(KERN_INFO "Starting CPU %d at %p\n", i, entry); local_flush_cache_all(); - prom_startcpu(cpu_node, - &smp_penguin_ctable, 0, (char *)entry); + prom_startcpu(cpu_node, &smp_penguin_ctable, 0, (char *)entry); /* wheee... it's going... */ - for(timeout = 0; timeout < 10000; timeout++) { - if(cpu_callin_map[i]) + for (timeout = 0; timeout < 10000; timeout++) { + if (cpu_callin_map[i]) break; udelay(200); } if (!(cpu_callin_map[i])) { - printk("Processor %d is stuck.\n", i); + printk(KERN_ERR "Processor %d is stuck.\n", i); return -ENODEV; } @@ -202,6 +159,7 @@ void __init smp4m_smp_done(void) void smp4m_irq_rotate(int cpu) { int next = cpu_data(cpu).next; + if (next != cpu) set_irq_udt(next); } @@ -243,7 +201,7 @@ static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, cpu_clear(smp_processor_id(), mask); cpus_and(mask, cpu_online_map, mask); - for(i = 0; i < ncpus; i++) { + for (i = 0; i < ncpus; i++) { if (cpu_isset(i, mask)) { ccall_info.processors_in[i] = 0; ccall_info.processors_out[i] = 0; @@ -262,19 +220,18 @@ static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1, do { if (!cpu_isset(i, mask)) continue; - while(!ccall_info.processors_in[i]) + while (!ccall_info.processors_in[i]) barrier(); - } while(++i < ncpus); + } while (++i < ncpus); i = 0; do { if (!cpu_isset(i, mask)) continue; - while(!ccall_info.processors_out[i]) + while (!ccall_info.processors_out[i]) barrier(); - } while(++i < ncpus); + } while (++i < ncpus); } - spin_unlock_irqrestore(&cross_call_lock, flags); } @@ -289,8 +246,6 @@ void smp4m_cross_call_irq(void) ccall_info.processors_out[i] = 1; } -extern void sun4m_clear_profile_irq(int cpu); - void smp4m_percpu_timer_interrupt(struct pt_regs *regs) { struct pt_regs *old_regs; @@ -302,7 +257,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs) profile_tick(CPU_PROFILING); - if(!--prof_counter(cpu)) { + if (!--prof_counter(cpu)) { int user = user_mode(regs); irq_enter(); @@ -314,8 +269,6 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs) set_irq_regs(old_regs); } -extern unsigned int lvl14_resolution; - static void __cpuinit smp_setup_percpu_timer(void) { int cpu = smp_processor_id(); @@ -323,7 +276,7 @@ static void __cpuinit smp_setup_percpu_timer(void) prof_counter(cpu) = prof_multiplier(cpu) = 1; load_profile_irq(cpu, lvl14_resolution); - if(cpu == boot_cpu_id) + if (cpu == boot_cpu_id) enable_pil_irq(14); } @@ -331,9 +284,9 @@ static void __init smp4m_blackbox_id(unsigned *addr) { int rd = *addr & 0x3e000000; int rs1 = rd >> 11; - + addr[0] = 0x81580000 | rd; /* rd %tbr, reg */ - addr[1] = 0x8130200c | rd | rs1; /* srl reg, 0xc, reg */ + addr[1] = 0x8130200c | rd | rs1; /* srl reg, 0xc, reg */ addr[2] = 0x80082003 | rd | rs1; /* and reg, 3, reg */ } @@ -341,9 +294,9 @@ static void __init smp4m_blackbox_current(unsigned *addr) { int rd = *addr & 0x3e000000; int rs1 = rd >> 11; - + addr[0] = 0x81580000 | rd; /* rd %tbr, reg */ - addr[2] = 0x8130200a | rd | rs1; /* srl reg, 0xa, reg */ + addr[2] = 0x8130200a | rd | rs1; /* srl reg, 0xa, reg */ addr[4] = 0x8008200c | rd | rs1; /* and reg, 0xc, reg */ } -- cgit v0.10.2