From b51f3beecfbbfc946749a91fb444cb8917cf444f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 Jan 2015 16:14:02 +0100 Subject: cfg80211: change bandwidth reporting to explicit field For some reason, we made the bandwidth separate flags, which is rather confusing - a single rate cannot have different bandwidths at the same time. Change this to no longer be flags but use a separate field for the bandwidth ('bw') instead. While at it, add support for 5 and 10 MHz rates - these are reported as regular legacy rates with their real bitrate, but tagged as 5/10 now to make it easier to distinguish them. In the nl80211 API, the flags are preserved, but the code now can also clearly only set a single one of the flags. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 44dd6ef..85da63a 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1827,6 +1827,7 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev, } sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; + sinfo->txrate.bw = RATE_INFO_BW_20; } else if (is_rate_ht40(rate, &mcs, &sgi)) { if (sgi) { sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; @@ -1835,7 +1836,7 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev, sinfo->txrate.mcs = mcs; } - sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; + sinfo->txrate.bw = RATE_INFO_BW_40; sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; } else { ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 71312ff..1996a8b 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -856,16 +856,16 @@ mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo, /* HT or VHT */ switch (tx_htinfo & (BIT(3) | BIT(2))) { case 0: - /* This will be 20MHz */ + rate->bw = RATE_INFO_BW_20; break; case (BIT(2)): - rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; + rate->bw = RATE_INFO_BW_40; break; case (BIT(3)): - rate->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH; + rate->bw = RATE_INFO_BW_80; break; case (BIT(3) | BIT(2)): - rate->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH; + rate->bw = RATE_INFO_BW_160; break; } @@ -885,8 +885,9 @@ mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo, if ((tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) { rate->mcs = priv->tx_rate; rate->flags |= RATE_INFO_FLAGS_MCS; + rate->bw = RATE_INFO_BW_20; if (tx_htinfo & BIT(1)) - rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; + rate->bw = RATE_INFO_BW_40; if (tx_htinfo & BIT(2)) rate->flags |= RATE_INFO_FLAGS_SHORT_GI; } diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 0322048..7b44ba0 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -873,20 +873,35 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS - * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 MHz width transmission - * @RATE_INFO_FLAGS_80_MHZ_WIDTH: 80 MHz width transmission - * @RATE_INFO_FLAGS_160_MHZ_WIDTH: 160 MHz width transmission * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval * @RATE_INFO_FLAGS_60G: 60GHz MCS */ enum rate_info_flags { RATE_INFO_FLAGS_MCS = BIT(0), RATE_INFO_FLAGS_VHT_MCS = BIT(1), - RATE_INFO_FLAGS_40_MHZ_WIDTH = BIT(2), - RATE_INFO_FLAGS_80_MHZ_WIDTH = BIT(3), - RATE_INFO_FLAGS_160_MHZ_WIDTH = BIT(4), - RATE_INFO_FLAGS_SHORT_GI = BIT(5), - RATE_INFO_FLAGS_60G = BIT(6), + RATE_INFO_FLAGS_SHORT_GI = BIT(2), + RATE_INFO_FLAGS_60G = BIT(3), +}; + +/** + * enum rate_info_bw - rate bandwidth information + * + * Used by the driver to indicate the rate bandwidth. + * + * @RATE_INFO_BW_5: 5 MHz bandwidth + * @RATE_INFO_BW_10: 10 MHz bandwidth + * @RATE_INFO_BW_20: 20 MHz bandwidth + * @RATE_INFO_BW_40: 40 MHz bandwidth + * @RATE_INFO_BW_80: 80 MHz bandwidth + * @RATE_INFO_BW_160: 160 MHz bandwidth + */ +enum rate_info_bw { + RATE_INFO_BW_5, + RATE_INFO_BW_10, + RATE_INFO_BW_20, + RATE_INFO_BW_40, + RATE_INFO_BW_80, + RATE_INFO_BW_160, }; /** @@ -898,12 +913,14 @@ enum rate_info_flags { * @mcs: mcs index if struct describes a 802.11n bitrate * @legacy: bitrate in 100kbit/s for 802.11abg * @nss: number of streams (VHT only) + * @bw: bandwidth (from &enum rate_info_bw) */ struct rate_info { u8 flags; u8 mcs; u16 legacy; u8 nss; + u8 bw; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 11cdb85..f52797a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2281,6 +2281,12 @@ struct nl80211_sta_flag_update { * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the * same as 160 for purposes of the bitrates * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate + * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * half the base (20 MHz) rate + * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * a quarter of the base (20 MHz) rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -2295,6 +2301,8 @@ enum nl80211_rate_info { NL80211_RATE_INFO_80_MHZ_WIDTH, NL80211_RATE_INFO_80P80_MHZ_WIDTH, NL80211_RATE_INFO_160_MHZ_WIDTH, + NL80211_RATE_INFO_10_MHZ_WIDTH, + NL80211_RATE_INFO_5_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 6d5076f..ff090ef 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -428,11 +428,13 @@ void sta_set_rate_info_tx(struct sta_info *sta, rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); } if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; - if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH) - rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH; - if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH) - rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH; + rinfo->bw = RATE_INFO_BW_40; + else if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH) + rinfo->bw = RATE_INFO_BW_80; + else if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH) + rinfo->bw = RATE_INFO_BW_160; + else + rinfo->bw = RATE_INFO_BW_20; if (rate->flags & IEEE80211_TX_RC_SHORT_GI) rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; } @@ -459,14 +461,21 @@ void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo) rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); } - if (sta->last_rx_rate_flag & RX_FLAG_40MHZ) - rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI) rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; - if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ) - rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH; - if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ) - rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH; + + if (sta->last_rx_rate_flag & RX_FLAG_5MHZ) + rinfo->bw = RATE_INFO_BW_5; + else if (sta->last_rx_rate_flag & RX_FLAG_10MHZ) + rinfo->bw = RATE_INFO_BW_10; + else if (sta->last_rx_rate_flag & RX_FLAG_40MHZ) + rinfo->bw = RATE_INFO_BW_40; + else if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ) + rinfo->bw = RATE_INFO_BW_80; + else if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ) + rinfo->bw = RATE_INFO_BW_160; + else + rinfo->bw = RATE_INFO_BW_20; } static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev, diff --git a/net/mac80211/util.c b/net/mac80211/util.c index db72161..fbd37d4 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2541,7 +2541,9 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local, ri.mcs = status->rate_idx; ri.flags |= RATE_INFO_FLAGS_MCS; if (status->flag & RX_FLAG_40MHZ) - ri.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; + ri.bw = RATE_INFO_BW_40; + else + ri.bw = RATE_INFO_BW_20; if (status->flag & RX_FLAG_SHORT_GI) ri.flags |= RATE_INFO_FLAGS_SHORT_GI; } else if (status->flag & RX_FLAG_VHT) { @@ -2549,11 +2551,13 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local, ri.mcs = status->rate_idx; ri.nss = status->vht_nss; if (status->flag & RX_FLAG_40MHZ) - ri.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; - if (status->vht_flag & RX_VHT_FLAG_80MHZ) - ri.flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH; - if (status->vht_flag & RX_VHT_FLAG_160MHZ) - ri.flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH; + ri.bw = RATE_INFO_BW_40; + else if (status->vht_flag & RX_VHT_FLAG_80MHZ) + ri.bw = RATE_INFO_BW_80; + else if (status->vht_flag & RX_VHT_FLAG_160MHZ) + ri.bw = RATE_INFO_BW_160; + else + ri.bw = RATE_INFO_BW_20; if (status->flag & RX_FLAG_SHORT_GI) ri.flags |= RATE_INFO_FLAGS_SHORT_GI; } else { @@ -2561,10 +2565,15 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local, int shift = 0; int bitrate; - if (status->flag & RX_FLAG_10MHZ) + if (status->flag & RX_FLAG_10MHZ) { shift = 1; - if (status->flag & RX_FLAG_5MHZ) + ri.bw = RATE_INFO_BW_10; + } else if (status->flag & RX_FLAG_5MHZ) { shift = 2; + ri.bw = RATE_INFO_BW_5; + } else { + ri.bw = RATE_INFO_BW_20; + } sband = local->hw.wiphy->bands[status->band]; bitrate = sband->bitrates[status->rate_idx].bitrate; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 8998484..8e56eeb 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3578,6 +3578,7 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info, struct nlattr *rate; u32 bitrate; u16 bitrate_compat; + enum nl80211_attrs rate_flg; rate = nla_nest_start(msg, attr); if (!rate) @@ -3594,12 +3595,36 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info, nla_put_u16(msg, NL80211_RATE_INFO_BITRATE, bitrate_compat)) return false; + switch (info->bw) { + case RATE_INFO_BW_5: + rate_flg = NL80211_RATE_INFO_5_MHZ_WIDTH; + break; + case RATE_INFO_BW_10: + rate_flg = NL80211_RATE_INFO_10_MHZ_WIDTH; + break; + default: + WARN_ON(1); + /* fall through */ + case RATE_INFO_BW_20: + rate_flg = 0; + break; + case RATE_INFO_BW_40: + rate_flg = NL80211_RATE_INFO_40_MHZ_WIDTH; + break; + case RATE_INFO_BW_80: + rate_flg = NL80211_RATE_INFO_80_MHZ_WIDTH; + break; + case RATE_INFO_BW_160: + rate_flg = NL80211_RATE_INFO_160_MHZ_WIDTH; + break; + } + + if (rate_flg && nla_put_flag(msg, rate_flg)) + return false; + if (info->flags & RATE_INFO_FLAGS_MCS) { if (nla_put_u8(msg, NL80211_RATE_INFO_MCS, info->mcs)) return false; - if (info->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH && - nla_put_flag(msg, NL80211_RATE_INFO_40_MHZ_WIDTH)) - return false; if (info->flags & RATE_INFO_FLAGS_SHORT_GI && nla_put_flag(msg, NL80211_RATE_INFO_SHORT_GI)) return false; @@ -3608,15 +3633,6 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info, return false; if (nla_put_u8(msg, NL80211_RATE_INFO_VHT_NSS, info->nss)) return false; - if (info->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH && - nla_put_flag(msg, NL80211_RATE_INFO_40_MHZ_WIDTH)) - return false; - if (info->flags & RATE_INFO_FLAGS_80_MHZ_WIDTH && - nla_put_flag(msg, NL80211_RATE_INFO_80_MHZ_WIDTH)) - return false; - if (info->flags & RATE_INFO_FLAGS_160_MHZ_WIDTH && - nla_put_flag(msg, NL80211_RATE_INFO_160_MHZ_WIDTH)) - return false; if (info->flags & RATE_INFO_FLAGS_SHORT_GI && nla_put_flag(msg, NL80211_RATE_INFO_SHORT_GI)) return false; diff --git a/net/wireless/util.c b/net/wireless/util.c index 6942d48..3535e8a 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1073,9 +1073,24 @@ static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate) if (WARN_ON_ONCE(rate->mcs > 9)) return 0; - idx = rate->flags & RATE_INFO_FLAGS_160_MHZ_WIDTH ? 3 : - rate->flags & RATE_INFO_FLAGS_80_MHZ_WIDTH ? 2 : - rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH ? 1 : 0; + switch (rate->bw) { + case RATE_INFO_BW_160: + idx = 3; + break; + case RATE_INFO_BW_80: + idx = 2; + break; + case RATE_INFO_BW_40: + idx = 1; + break; + case RATE_INFO_BW_5: + case RATE_INFO_BW_10: + default: + WARN_ON(1); + /* fall through */ + case RATE_INFO_BW_20: + idx = 0; + } bitrate = base[idx][rate->mcs]; bitrate *= rate->nss; @@ -1106,8 +1121,7 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate) modulation = rate->mcs & 7; streams = (rate->mcs >> 3) + 1; - bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ? - 13500000 : 6500000; + bitrate = (rate->bw == RATE_INFO_BW_40) ? 13500000 : 6500000; if (modulation < 4) bitrate *= (modulation + 1); -- cgit v0.10.2