From baa1702290953295e421f0f433e2b1ff4815827c Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 16 Mar 2016 13:33:35 -0500 Subject: rtlwifi: btcoexist: Implement antenna selection The previous patch added an option to rtl8723be to manually select the antenna for those cases when only a single antenna is present, and the on-board EEPROM is incorrectly programmed. This patch implements the necessary changes in the Bluetooth coexistence driver. Signed-off-by: Larry Finger Cc: Stable [V4.0+] Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c index c43ab59..77cbd10 100644 --- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c +++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c @@ -1203,7 +1203,6 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist, /* Force GNT_BT to low */ btcoexist->btc_write_1byte_bitmask(btcoexist, 0x765, 0x18, 0x0); - btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0); if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) { /* tell firmware "no antenna inverse" */ @@ -1211,19 +1210,25 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist, h2c_parameter[1] = 1; /* ext switch type */ btcoexist->btc_fill_h2c(btcoexist, 0x65, 2, h2c_parameter); + btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0); } else { /* tell firmware "antenna inverse" */ h2c_parameter[0] = 1; h2c_parameter[1] = 1; /* ext switch type */ btcoexist->btc_fill_h2c(btcoexist, 0x65, 2, h2c_parameter); + btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280); } } /* ext switch setting */ if (use_ext_switch) { /* fixed internal switch S1->WiFi, S0->BT */ - btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0); + if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) + btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0); + else + btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280); + switch (antpos_type) { case BTC_ANT_WIFI_AT_MAIN: /* ext switch main at wifi */ diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c index b2791c8..babd149 100644 --- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c +++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c @@ -965,13 +965,38 @@ void exhalbtc_set_chip_type(u8 chip_type) } } -void exhalbtc_set_ant_num(u8 type, u8 ant_num) +void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num) { if (BT_COEX_ANT_TYPE_PG == type) { gl_bt_coexist.board_info.pg_ant_num = ant_num; gl_bt_coexist.board_info.btdm_ant_num = ant_num; + /* The antenna position: + * Main (default) or Aux for pgAntNum=2 && btdmAntNum =1. + * The antenna position should be determined by + * auto-detect mechanism. + * The following is assumed to main, + * and those must be modified + * if y auto-detect mechanism is ready + */ + if ((gl_bt_coexist.board_info.pg_ant_num == 2) && + (gl_bt_coexist.board_info.btdm_ant_num == 1)) + gl_bt_coexist.board_info.btdm_ant_pos = + BTC_ANTENNA_AT_MAIN_PORT; + else + gl_bt_coexist.board_info.btdm_ant_pos = + BTC_ANTENNA_AT_MAIN_PORT; } else if (BT_COEX_ANT_TYPE_ANTDIV == type) { gl_bt_coexist.board_info.btdm_ant_num = ant_num; + gl_bt_coexist.board_info.btdm_ant_pos = + BTC_ANTENNA_AT_MAIN_PORT; + } else if (type == BT_COEX_ANT_TYPE_DETECTED) { + gl_bt_coexist.board_info.btdm_ant_num = ant_num; + if (rtlpriv->cfg->mod_params->ant_sel == 1) + gl_bt_coexist.board_info.btdm_ant_pos = + BTC_ANTENNA_AT_AUX_PORT; + else + gl_bt_coexist.board_info.btdm_ant_pos = + BTC_ANTENNA_AT_MAIN_PORT; } } diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h index 0a903ea..f41ca57 100644 --- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h +++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h @@ -535,7 +535,7 @@ void exhalbtc_set_bt_patch_version(u16 bt_hci_version, u16 bt_patch_version); void exhalbtc_update_min_bt_rssi(char bt_rssi); void exhalbtc_set_bt_exist(bool bt_exist); void exhalbtc_set_chip_type(u8 chip_type); -void exhalbtc_set_ant_num(u8 type, u8 ant_num); +void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num); void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist); void exhalbtc_signal_compensation(struct btc_coexist *btcoexist, u8 *rssi_wifi, u8 *rssi_bt); diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c index b9b0cb7..d3fd921 100644 --- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c +++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/rtl_btc.c @@ -72,7 +72,10 @@ void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv) __func__, bt_type); exhalbtc_set_chip_type(bt_type); - exhalbtc_set_ant_num(BT_COEX_ANT_TYPE_PG, ant_num); + if (rtlpriv->cfg->mod_params->ant_sel == 1) + exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_DETECTED, 1); + else + exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_PG, ant_num); } void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv) -- cgit v0.10.2