From d4edc5b6c480a0917e61d93d55531d7efa6230be Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Mon, 30 Dec 2013 17:05:34 +0530 Subject: powerpc: Fix the setup of CPU-to-Node mappings during CPU online On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 89e3ef2..d0b5fca 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -22,7 +22,15 @@ struct device_node; static inline int cpu_to_node(int cpu) { - return numa_cpu_lookup_table[cpu]; + int nid; + + nid = numa_cpu_lookup_table[cpu]; + + /* + * During early boot, the numa-cpu lookup table might not have been + * setup for all CPUs yet. In such cases, default to node 0. + */ + return (nid < 0) ? 0 : nid; } #define parent_node(node) (node) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 078d3e0..6847d50 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -31,6 +31,8 @@ #include #include #include +#include +#include #include #include #include @@ -152,9 +154,22 @@ static void __init get_node_active_region(unsigned long pfn, } } -static void map_cpu_to_node(int cpu, int node) +static void reset_numa_cpu_lookup_table(void) +{ + unsigned int cpu; + + for_each_possible_cpu(cpu) + numa_cpu_lookup_table[cpu] = -1; +} + +static void update_numa_cpu_lookup_table(unsigned int cpu, int node) { numa_cpu_lookup_table[cpu] = node; +} + +static void map_cpu_to_node(int cpu, int node) +{ + update_numa_cpu_lookup_table(cpu, node); dbg("adding cpu %d to node %d\n", cpu, node); @@ -522,11 +537,24 @@ static int of_drconf_to_nid_single(struct of_drconf_cell *drmem, */ static int numa_setup_cpu(unsigned long lcpu) { - int nid = 0; - struct device_node *cpu = of_get_cpu_node(lcpu, NULL); + int nid; + struct device_node *cpu; + + /* + * If a valid cpu-to-node mapping is already available, use it + * directly instead of querying the firmware, since it represents + * the most recent mapping notified to us by the platform (eg: VPHN). + */ + if ((nid = numa_cpu_lookup_table[lcpu]) >= 0) { + map_cpu_to_node(lcpu, nid); + return nid; + } + + cpu = of_get_cpu_node(lcpu, NULL); if (!cpu) { WARN_ON(1); + nid = 0; goto out; } @@ -1067,6 +1095,7 @@ void __init do_init_bootmem(void) */ setup_node_to_cpumask_map(); + reset_numa_cpu_lookup_table(); register_cpu_notifier(&ppc64_numa_nb); cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE, (void *)(unsigned long)boot_cpuid); @@ -1445,6 +1474,33 @@ static int update_cpu_topology(void *data) return 0; } +static int update_lookup_table(void *data) +{ + struct topology_update_data *update; + + if (!data) + return -EINVAL; + + /* + * Upon topology update, the numa-cpu lookup table needs to be updated + * for all threads in the core, including offline CPUs, to ensure that + * future hotplug operations respect the cpu-to-node associativity + * properly. + */ + for (update = data; update; update = update->next) { + int nid, base, j; + + nid = update->new_nid; + base = cpu_first_thread_sibling(update->cpu); + + for (j = 0; j < threads_per_core; j++) { + update_numa_cpu_lookup_table(base + j, nid); + } + } + + return 0; +} + /* * Update the node maps and sysfs entries for each cpu whose home node * has changed. Returns 1 when the topology has changed, and 0 otherwise. @@ -1513,6 +1569,14 @@ int arch_update_cpu_topology(void) stop_machine(update_cpu_topology, &updates[0], &updated_cpus); + /* + * Update the numa-cpu lookup table with the new mappings, even for + * offline CPUs. It is best to perform this update from the stop- + * machine context. + */ + stop_machine(update_lookup_table, &updates[0], + cpumask_of(raw_smp_processor_id())); + for (ud = &updates[0]; ud; ud = ud->next) { unregister_cpu_under_node(ud->cpu, ud->old_nid); register_cpu_under_node(ud->cpu, ud->new_nid); -- cgit v0.10.2