From 96aa1b419d47286db446f292cf898bb1a8b27f24 Mon Sep 17 00:00:00 2001 From: Ciju Rajan K Date: Mon, 23 Aug 2010 10:56:30 +0200 Subject: blkio: Fix return code for mkdir calls If the cgroup hierarchy for blkio control groups is deeper than two levels, kernel should not allow the creation of further levels. mkdir system call does not except EINVAL as a return value. This patch replaces EINVAL with more appropriate EPERM Signed-off-by: Ciju Rajan K Reviewed-by: KAMEZAWA Hiroyuki Signed-off-by: Jens Axboe diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index a680964..2fef1ef 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -966,7 +966,7 @@ blkiocg_create(struct cgroup_subsys *subsys, struct cgroup *cgroup) /* Currently we do not support hierarchy deeper than two level (0,1) */ if (parent != cgroup->top_cgroup) - return ERR_PTR(-EINVAL); + return ERR_PTR(-EPERM); blkcg = kzalloc(sizeof(*blkcg), GFP_KERNEL); if (!blkcg) -- cgit v0.10.2 From 75230ff2751e88d594a13a70eae2c146f45e323b Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Mon, 23 Aug 2010 11:02:17 +0200 Subject: cciss: disable doorbell reset on reset_devices The doorbell reset initially appears to work correctly, the controller resets, comes up, some i/o can even be done, but on at least some Smart Arrays in some servers, it eventually causes a subsequent controller lockup due to some kind of PCIe error, and kdump can end up leaving the root filesystem in an unbootable state. For this reason, until the problem is fixed, or at least isolated to certain hardware enough to be avoided, the doorbell reset should not be used at all. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 31064df..ce1a75d 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -4519,6 +4519,12 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev) misc_fw_support = readl(&cfgtable->misc_fw_support); use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET; + /* The doorbell reset seems to cause lockups on some Smart + * Arrays (e.g. P410, P410i, maybe others). Until this is + * fixed or at least isolated, avoid the doorbell reset. + */ + use_doorbell = 0; + rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell); if (rc) goto unmap_cfgtable; -- cgit v0.10.2 From b6508c1618e7aab085f191efb41b7b019a94ea38 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Mon, 23 Aug 2010 12:23:33 +0200 Subject: cfq-iosched: Do not idle if slice_idle=0 Do not idle either on cfq queue or service tree if slice_idle=0. User does not want any queue or service tree idling. Currently even if slice_idle=0, we were waiting for request to finish before expiring the queue and that can lead to lower queue depths. Acked-by: Jeff Moyer Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index eb4086f..8830569 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1839,6 +1839,9 @@ static bool cfq_should_idle(struct cfq_data *cfqd, struct cfq_queue *cfqq) BUG_ON(!service_tree); BUG_ON(!service_tree->count); + if (!cfqd->cfq_slice_idle) + return false; + /* We never do for idle class queues. */ if (prio == IDLE_WORKLOAD) return false; @@ -1879,7 +1882,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) /* * idle is disabled, either manually or by past process history */ - if (!cfqd->cfq_slice_idle || !cfq_should_idle(cfqd, cfqq)) + if (!cfq_should_idle(cfqd, cfqq)) return; /* -- cgit v0.10.2 From 02b35081fc98f681411586d3acf9eaad8b8f6e07 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Mon, 23 Aug 2010 12:23:53 +0200 Subject: cfq-iosched: Do group share accounting in IOPS when slice_idle=0 o Implement another CFQ mode where we charge group in terms of number of requests dispatched instead of measuring the time. Measuring in terms of time is not possible when we are driving deeper queue depths and there are requests from multiple cfq queues in the request queue. o This mode currently gets activated if one sets slice_idle=0 and associated disk supports NCQ. Again the idea is that on an NCQ disk with idling disabled most of the queues will dispatch 1 or more requests and then cfq queue expiry happens and we don't have a way to measure time. So start providing fairness in terms of IOPS. o Currently IOPS mode works only with cfq group scheduling. CFQ is following different scheduling algorithms for queue and group scheduling. These IOPS stats are used only for group scheduling hence in non-croup mode nothing should change. o For CFQ group scheduling one can disable slice idling so that we don't idle on queue and drive deeper request queue depths (achieving better throughput), at the same time group idle is enabled so one should get service differentiation among groups. Signed-off-by: Vivek Goyal Acked-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 8830569..3fc6be1 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -378,6 +378,21 @@ CFQ_CFQQ_FNS(wait_busy); &cfqg->service_trees[i][j]: NULL) \ +static inline bool iops_mode(struct cfq_data *cfqd) +{ + /* + * If we are not idling on queues and it is a NCQ drive, parallel + * execution of requests is on and measuring time is not possible + * in most of the cases until and unless we drive shallower queue + * depths and that becomes a performance bottleneck. In such cases + * switch to start providing fairness in terms of number of IOs. + */ + if (!cfqd->cfq_slice_idle && cfqd->hw_tag) + return true; + else + return false; +} + static inline enum wl_prio_t cfqq_prio(struct cfq_queue *cfqq) { if (cfq_class_idle(cfqq)) @@ -906,7 +921,6 @@ static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq) slice_used = cfqq->allocated_slice; } - cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u", slice_used); return slice_used; } @@ -914,19 +928,21 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg, struct cfq_queue *cfqq) { struct cfq_rb_root *st = &cfqd->grp_service_tree; - unsigned int used_sl, charge_sl; + unsigned int used_sl, charge; int nr_sync = cfqg->nr_cfqq - cfqg_busy_async_queues(cfqd, cfqg) - cfqg->service_tree_idle.count; BUG_ON(nr_sync < 0); - used_sl = charge_sl = cfq_cfqq_slice_usage(cfqq); + used_sl = charge = cfq_cfqq_slice_usage(cfqq); - if (!cfq_cfqq_sync(cfqq) && !nr_sync) - charge_sl = cfqq->allocated_slice; + if (iops_mode(cfqd)) + charge = cfqq->slice_dispatch; + else if (!cfq_cfqq_sync(cfqq) && !nr_sync) + charge = cfqq->allocated_slice; /* Can't update vdisktime while group is on service tree */ cfq_rb_erase(&cfqg->rb_node, st); - cfqg->vdisktime += cfq_scale_slice(charge_sl, cfqg); + cfqg->vdisktime += cfq_scale_slice(charge, cfqg); __cfq_group_service_tree_add(st, cfqg); /* This group is being expired. Save the context */ @@ -940,6 +956,8 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg, cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime, st->min_vdisktime); + cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u", + used_sl, cfqq->slice_dispatch, charge, iops_mode(cfqd)); cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl); cfq_blkiocg_set_start_empty_time(&cfqg->blkg); } -- cgit v0.10.2 From 80bdf0c78fff075dfa21576273c8b0c7db22bdfe Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Mon, 23 Aug 2010 12:24:26 +0200 Subject: cfq-iosched: Implement tunable group_idle o Implement a new tunable group_idle, which allows idling on the group instead of a cfq queue. Hence one can set slice_idle = 0 and not idle on the individual queues but idle on the group. This way on fast storage we can get fairness between groups at the same time overall throughput improves. Signed-off-by: Vivek Goyal Acked-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 3fc6be1..85e4819 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -30,6 +30,7 @@ static const int cfq_slice_sync = HZ / 10; static int cfq_slice_async = HZ / 25; static const int cfq_slice_async_rq = 2; static int cfq_slice_idle = HZ / 125; +static int cfq_group_idle = HZ / 125; static const int cfq_target_latency = HZ * 3/10; /* 300 ms */ static const int cfq_hist_divisor = 4; @@ -198,6 +199,8 @@ struct cfq_group { struct hlist_node cfqd_node; atomic_t ref; #endif + /* number of requests that are on the dispatch list or inside driver */ + int dispatched; }; /* @@ -271,6 +274,7 @@ struct cfq_data { unsigned int cfq_slice[2]; unsigned int cfq_slice_async_rq; unsigned int cfq_slice_idle; + unsigned int cfq_group_idle; unsigned int cfq_latency; unsigned int cfq_group_isolation; @@ -1884,7 +1888,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) { struct cfq_queue *cfqq = cfqd->active_queue; struct cfq_io_context *cic; - unsigned long sl; + unsigned long sl, group_idle = 0; /* * SSD device without seek penalty, disable idling. But only do so @@ -1900,8 +1904,13 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) /* * idle is disabled, either manually or by past process history */ - if (!cfq_should_idle(cfqd, cfqq)) - return; + if (!cfq_should_idle(cfqd, cfqq)) { + /* no queue idling. Check for group idling */ + if (cfqd->cfq_group_idle) + group_idle = cfqd->cfq_group_idle; + else + return; + } /* * still active requests from this queue, don't idle @@ -1928,13 +1937,21 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) return; } + /* There are other queues in the group, don't do group idle */ + if (group_idle && cfqq->cfqg->nr_cfqq > 1) + return; + cfq_mark_cfqq_wait_request(cfqq); - sl = cfqd->cfq_slice_idle; + if (group_idle) + sl = cfqd->cfq_group_idle; + else + sl = cfqd->cfq_slice_idle; mod_timer(&cfqd->idle_slice_timer, jiffies + sl); cfq_blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg); - cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl); + cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu group_idle: %d", sl, + group_idle ? 1 : 0); } /* @@ -1950,6 +1967,7 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq) cfqq->next_rq = cfq_find_next_rq(cfqd, cfqq, rq); cfq_remove_request(rq); cfqq->dispatched++; + (RQ_CFQG(rq))->dispatched++; elv_dispatch_sort(q, rq); cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++; @@ -2219,7 +2237,7 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) cfqq = NULL; goto keep_queue; } else - goto expire; + goto check_group_idle; } /* @@ -2247,8 +2265,23 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) * flight or is idling for a new request, allow either of these * conditions to happen (or time out) before selecting a new queue. */ - if (timer_pending(&cfqd->idle_slice_timer) || - (cfqq->dispatched && cfq_should_idle(cfqd, cfqq))) { + if (timer_pending(&cfqd->idle_slice_timer)) { + cfqq = NULL; + goto keep_queue; + } + + if (cfqq->dispatched && cfq_should_idle(cfqd, cfqq)) { + cfqq = NULL; + goto keep_queue; + } + + /* + * If group idle is enabled and there are requests dispatched from + * this group, wait for requests to complete. + */ +check_group_idle: + if (cfqd->cfq_group_idle && cfqq->cfqg->nr_cfqq == 1 + && cfqq->cfqg->dispatched) { cfqq = NULL; goto keep_queue; } @@ -3396,6 +3429,7 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq) WARN_ON(!cfqq->dispatched); cfqd->rq_in_driver--; cfqq->dispatched--; + (RQ_CFQG(rq))->dispatched--; cfq_blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq), rq_io_start_time_ns(rq), rq_data_dir(rq), rq_is_sync(rq)); @@ -3425,7 +3459,10 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq) * the queue. */ if (cfq_should_wait_busy(cfqd, cfqq)) { - cfqq->slice_end = jiffies + cfqd->cfq_slice_idle; + unsigned long extend_sl = cfqd->cfq_slice_idle; + if (!cfqd->cfq_slice_idle) + extend_sl = cfqd->cfq_group_idle; + cfqq->slice_end = jiffies + extend_sl; cfq_mark_cfqq_wait_busy(cfqq); cfq_log_cfqq(cfqd, cfqq, "will busy wait"); } @@ -3871,6 +3908,7 @@ static void *cfq_init_queue(struct request_queue *q) cfqd->cfq_slice[1] = cfq_slice_sync; cfqd->cfq_slice_async_rq = cfq_slice_async_rq; cfqd->cfq_slice_idle = cfq_slice_idle; + cfqd->cfq_group_idle = cfq_group_idle; cfqd->cfq_latency = 1; cfqd->cfq_group_isolation = 0; cfqd->hw_tag = -1; @@ -3943,6 +3981,7 @@ SHOW_FUNCTION(cfq_fifo_expire_async_show, cfqd->cfq_fifo_expire[0], 1); SHOW_FUNCTION(cfq_back_seek_max_show, cfqd->cfq_back_max, 0); SHOW_FUNCTION(cfq_back_seek_penalty_show, cfqd->cfq_back_penalty, 0); SHOW_FUNCTION(cfq_slice_idle_show, cfqd->cfq_slice_idle, 1); +SHOW_FUNCTION(cfq_group_idle_show, cfqd->cfq_group_idle, 1); SHOW_FUNCTION(cfq_slice_sync_show, cfqd->cfq_slice[1], 1); SHOW_FUNCTION(cfq_slice_async_show, cfqd->cfq_slice[0], 1); SHOW_FUNCTION(cfq_slice_async_rq_show, cfqd->cfq_slice_async_rq, 0); @@ -3975,6 +4014,7 @@ STORE_FUNCTION(cfq_back_seek_max_store, &cfqd->cfq_back_max, 0, UINT_MAX, 0); STORE_FUNCTION(cfq_back_seek_penalty_store, &cfqd->cfq_back_penalty, 1, UINT_MAX, 0); STORE_FUNCTION(cfq_slice_idle_store, &cfqd->cfq_slice_idle, 0, UINT_MAX, 1); +STORE_FUNCTION(cfq_group_idle_store, &cfqd->cfq_group_idle, 0, UINT_MAX, 1); STORE_FUNCTION(cfq_slice_sync_store, &cfqd->cfq_slice[1], 1, UINT_MAX, 1); STORE_FUNCTION(cfq_slice_async_store, &cfqd->cfq_slice[0], 1, UINT_MAX, 1); STORE_FUNCTION(cfq_slice_async_rq_store, &cfqd->cfq_slice_async_rq, 1, @@ -3996,6 +4036,7 @@ static struct elv_fs_entry cfq_attrs[] = { CFQ_ATTR(slice_async), CFQ_ATTR(slice_async_rq), CFQ_ATTR(slice_idle), + CFQ_ATTR(group_idle), CFQ_ATTR(low_latency), CFQ_ATTR(group_isolation), __ATTR_NULL @@ -4049,6 +4090,12 @@ static int __init cfq_init(void) if (!cfq_slice_idle) cfq_slice_idle = 1; +#ifdef CONFIG_CFQ_GROUP_IOSCHED + if (!cfq_group_idle) + cfq_group_idle = 1; +#else + cfq_group_idle = 0; +#endif if (cfq_slab_setup()) return -ENOMEM; -- cgit v0.10.2 From c4e7893ebc3a5c507b53f59b9de448db20849944 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Mon, 23 Aug 2010 12:25:03 +0200 Subject: cfq-iosched: blktrace print per slice sector stats o Divyesh had gotten rid of this code in the past. I want to re-introduce it back as it helps me a lot during debugging. Reviewed-by: Jeff Moyer Reviewed-by: Divyesh Shah Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 85e4819..f65c6f0 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -148,6 +148,8 @@ struct cfq_queue { struct cfq_queue *new_cfqq; struct cfq_group *cfqg; struct cfq_group *orig_cfqg; + /* Number of sectors dispatched from queue in single dispatch round */ + unsigned long nr_sectors; }; /* @@ -960,8 +962,9 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg, cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime, st->min_vdisktime); - cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u", - used_sl, cfqq->slice_dispatch, charge, iops_mode(cfqd)); + cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u" + " sect=%u", used_sl, cfqq->slice_dispatch, charge, + iops_mode(cfqd), cfqq->nr_sectors); cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl); cfq_blkiocg_set_start_empty_time(&cfqg->blkg); } @@ -1609,6 +1612,7 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd, cfqq->allocated_slice = 0; cfqq->slice_end = 0; cfqq->slice_dispatch = 0; + cfqq->nr_sectors = 0; cfq_clear_cfqq_wait_request(cfqq); cfq_clear_cfqq_must_dispatch(cfqq); @@ -1971,6 +1975,7 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq) elv_dispatch_sort(q, rq); cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++; + cfqq->nr_sectors += blk_rq_sectors(rq); cfq_blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq), rq_data_dir(rq), rq_is_sync(rq)); } -- cgit v0.10.2 From 6d6ac1c1a3d4f95953aa3b085e8f16692d3a7179 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Mon, 23 Aug 2010 12:25:29 +0200 Subject: cfq-iosched: Documentation help for new tunables Some documentation to provide help with tunables. Signed-off-by: Vivek Goyal Acked-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt new file mode 100644 index 0000000..e578fee --- /dev/null +++ b/Documentation/block/cfq-iosched.txt @@ -0,0 +1,45 @@ +CFQ ioscheduler tunables +======================== + +slice_idle +---------- +This specifies how long CFQ should idle for next request on certain cfq queues +(for sequential workloads) and service trees (for random workloads) before +queue is expired and CFQ selects next queue to dispatch from. + +By default slice_idle is a non-zero value. That means by default we idle on +queues/service trees. This can be very helpful on highly seeky media like +single spindle SATA/SAS disks where we can cut down on overall number of +seeks and see improved throughput. + +Setting slice_idle to 0 will remove all the idling on queues/service tree +level and one should see an overall improved throughput on faster storage +devices like multiple SATA/SAS disks in hardware RAID configuration. The down +side is that isolation provided from WRITES also goes down and notion of +IO priority becomes weaker. + +So depending on storage and workload, it might be useful to set slice_idle=0. +In general I think for SATA/SAS disks and software RAID of SATA/SAS disks +keeping slice_idle enabled should be useful. For any configurations where +there are multiple spindles behind single LUN (Host based hardware RAID +controller or for storage arrays), setting slice_idle=0 might end up in better +throughput and acceptable latencies. + +CFQ IOPS Mode for group scheduling +=================================== +Basic CFQ design is to provide priority based time slices. Higher priority +process gets bigger time slice and lower priority process gets smaller time +slice. Measuring time becomes harder if storage is fast and supports NCQ and +it would be better to dispatch multiple requests from multiple cfq queues in +request queue at a time. In such scenario, it is not possible to measure time +consumed by single queue accurately. + +What is possible though is to measure number of requests dispatched from a +single queue and also allow dispatch from multiple cfq queue at the same time. +This effectively becomes the fairness in terms of IOPS (IO operations per +second). + +If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches +to IOPS mode and starts providing fairness in terms of number of requests +dispatched. Note that this mode switching takes effect only for group +scheduling. For non-cgroup users nothing should change. diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt index 48e0b21..6919d62 100644 --- a/Documentation/cgroups/blkio-controller.txt +++ b/Documentation/cgroups/blkio-controller.txt @@ -217,6 +217,7 @@ Details of cgroup files CFQ sysfs tunable ================= /sys/block//queue/iosched/group_isolation +----------------------------------------------- If group_isolation=1, it provides stronger isolation between groups at the expense of throughput. By default group_isolation is 0. In general that @@ -243,6 +244,33 @@ By default one should run with group_isolation=0. If that is not sufficient and one wants stronger isolation between groups, then set group_isolation=1 but this will come at cost of reduced throughput. +/sys/block//queue/iosched/slice_idle +------------------------------------------ +On a faster hardware CFQ can be slow, especially with sequential workload. +This happens because CFQ idles on a single queue and single queue might not +drive deeper request queue depths to keep the storage busy. In such scenarios +one can try setting slice_idle=0 and that would switch CFQ to IOPS +(IO operations per second) mode on NCQ supporting hardware. + +That means CFQ will not idle between cfq queues of a cfq group and hence be +able to driver higher queue depth and achieve better throughput. That also +means that cfq provides fairness among groups in terms of IOPS and not in +terms of disk time. + +/sys/block//queue/iosched/group_idle +------------------------------------------ +If one disables idling on individual cfq queues and cfq service trees by +setting slice_idle=0, group_idle kicks in. That means CFQ will still idle +on the group in an attempt to provide fairness among groups. + +By default group_idle is same as slice_idle and does not do anything if +slice_idle is enabled. + +One can experience an overall throughput drop if you have created multiple +groups and put applications in that group which are not driving enough +IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle +on individual groups and throughput should improve. + What works ========== - Currently only sync IO queues are support. All the buffered writes are -- cgit v0.10.2 From 4ee69851cd4880f574d22f5ce08bec35b01c94e3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 23 Aug 2010 12:28:15 +0200 Subject: cciss: handle allocation failure If kmalloc() fails then cleanup and return failure (-1). Signed-off-by: Dan Carpenter Acked-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index ce1a75d..7191c16 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -4718,6 +4718,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, h->scatter_list = kmalloc(h->max_commands * sizeof(struct scatterlist *), GFP_KERNEL); + if (!h->scatter_list) + goto clean4; + for (k = 0; k < h->nr_cmds; k++) { h->scatter_list[k] = kmalloc(sizeof(struct scatterlist) * h->maxsgentries, -- cgit v0.10.2 From c87ffbb812cf6150097a5095b031f4013a8f78a5 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Mon, 23 Aug 2010 12:30:29 +0200 Subject: block: put dev->kobj in blk_register_queue fail path kernel needs to kobject_put on dev->kobj if elv_register_queue fails. Signed-off-by: Xiaotian Feng Cc: "Martin K. Petersen" Cc: Stephen Hemminger Cc: Nikanth Karthikesan Cc: David Teigland Signed-off-by: Jens Axboe diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 001ab18..0749b89 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -511,6 +511,7 @@ int blk_register_queue(struct gendisk *disk) kobject_uevent(&q->kobj, KOBJ_REMOVE); kobject_del(&q->kobj); blk_trace_remove_sysfs(disk_to_dev(disk)); + kobject_put(&dev->kobj); return ret; } -- cgit v0.10.2 From 5e00d1b5b4c10fb839afd5ce61db8e24339454b0 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 12 Aug 2010 14:31:06 +0200 Subject: BLOCK: fix bio.bi_rw handling Return of the bi_rw tests is no longer bool after commit 74450be1. But results of such tests are stored in bools. This doesn't fit in there for some compilers (gcc 4.5 here), so either use !! magic to get real bools or use ulong where the result is assigned somewhere. Signed-off-by: Jiri Slaby Cc: Christoph Hellwig Reviewed-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index ee1a1e7..32a1c12 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1198,9 +1198,9 @@ static int __make_request(struct request_queue *q, struct bio *bio) int el_ret; unsigned int bytes = bio->bi_size; const unsigned short prio = bio_prio(bio); - const bool sync = (bio->bi_rw & REQ_SYNC); - const bool unplug = (bio->bi_rw & REQ_UNPLUG); - const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK; + const bool sync = !!(bio->bi_rw & REQ_SYNC); + const bool unplug = !!(bio->bi_rw & REQ_UNPLUG); + const unsigned long ff = bio->bi_rw & REQ_FAILFAST_MASK; int rw_flags; if ((bio->bi_rw & REQ_HARDBARRIER) && diff --git a/drivers/block/loop.c b/drivers/block/loop.c index f3c636d..91797bb 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -477,7 +477,7 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) pos = ((loff_t) bio->bi_sector << 9) + lo->lo_offset; if (bio_rw(bio) == WRITE) { - bool barrier = (bio->bi_rw & REQ_HARDBARRIER); + bool barrier = !!(bio->bi_rw & REQ_HARDBARRIER); struct file *file = lo->lo_backing_file; if (barrier) { -- cgit v0.10.2 From 72f465033702ebfe20db8f50edaad59f0f38b0f5 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 23 Aug 2010 13:35:09 +0200 Subject: bio-integrity.c: remove dependency on __GFP_NOFAIL The kmalloc() in bio_integrity_prep() is failable, so remove __GFP_NOFAIL from its mask. Signed-off-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index 612a5c3..a8f4cc6 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -413,7 +413,7 @@ int bio_integrity_prep(struct bio *bio) /* Allocate kernel buffer for protection data */ len = sectors * blk_integrity_tuple_size(bi); - buf = kmalloc(len, GFP_NOIO | __GFP_NOFAIL | q->bounce_gfp); + buf = kmalloc(len, GFP_NOIO | q->bounce_gfp); if (unlikely(buf == NULL)) { printk(KERN_ERR "could not allocate integrity buffer\n"); return -EIO; -- cgit v0.10.2 From 220eb7fd984bfc7e6b4005fdf32efe9cd8af7cf2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 23 Aug 2010 13:36:20 +0200 Subject: fs/bio-integrity.c: return -ENOMEM on kmalloc failure Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c index a8f4cc6..4d0ff5e 100644 --- a/fs/bio-integrity.c +++ b/fs/bio-integrity.c @@ -416,7 +416,7 @@ int bio_integrity_prep(struct bio *bio) buf = kmalloc(len, GFP_NOIO | q->bounce_gfp); if (unlikely(buf == NULL)) { printk(KERN_ERR "could not allocate integrity buffer\n"); - return -EIO; + return -ENOMEM; } end = (((unsigned long) buf) + len + PAGE_SIZE - 1) >> PAGE_SHIFT; -- cgit v0.10.2 From 5dd531a03ad721b41911ddb32e6e0481404e7aaf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 23 Aug 2010 13:52:19 +0200 Subject: block: add function call to switch the IO scheduler from a driver Currently drivers must do an elevator_exit() + elevator_init() to switch IO schedulers. There are a few problems with this: - Since commit 1abec4fdbb142e3ccb6ce99832fae42129134a96, elevator_init() requires a zeroed out q->elevator pointer. The two existing in-kernel users don't do that. - It will only work at initialization time, since using the above two-staged construct does not properly quisce the queue. So add elevator_change() which takes care of this, and convert the elv_iosched_store() sysfs interface to use this helper as well. Reported-by: Peter Oberparleiter Reported-by: Kevin Vigor Signed-off-by: Jens Axboe diff --git a/block/elevator.c b/block/elevator.c index ec585c9..205b09a 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -1009,18 +1009,19 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) { struct elevator_queue *old_elevator, *e; void *data; + int err; /* * Allocate new elevator */ e = elevator_alloc(q, new_e); if (!e) - return 0; + return -ENOMEM; data = elevator_init_queue(q, e); if (!data) { kobject_put(&e->kobj); - return 0; + return -ENOMEM; } /* @@ -1043,7 +1044,8 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) __elv_unregister_queue(old_elevator); - if (elv_register_queue(q)) + err = elv_register_queue(q); + if (err) goto fail_register; /* @@ -1056,7 +1058,7 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name); - return 1; + return 0; fail_register: /* @@ -1071,17 +1073,19 @@ fail_register: queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q); spin_unlock_irq(q->queue_lock); - return 0; + return err; } -ssize_t elv_iosched_store(struct request_queue *q, const char *name, - size_t count) +/* + * Switch this queue to the given IO scheduler. + */ +int elevator_change(struct request_queue *q, const char *name) { char elevator_name[ELV_NAME_MAX]; struct elevator_type *e; if (!q->elevator) - return count; + return -ENXIO; strlcpy(elevator_name, name, sizeof(elevator_name)); e = elevator_get(strstrip(elevator_name)); @@ -1092,13 +1096,27 @@ ssize_t elv_iosched_store(struct request_queue *q, const char *name, if (!strcmp(elevator_name, q->elevator->elevator_type->elevator_name)) { elevator_put(e); - return count; + return 0; } - if (!elevator_switch(q, e)) - printk(KERN_ERR "elevator: switch to %s failed\n", - elevator_name); - return count; + return elevator_switch(q, e); +} +EXPORT_SYMBOL(elevator_change); + +ssize_t elv_iosched_store(struct request_queue *q, const char *name, + size_t count) +{ + int ret; + + if (!q->elevator) + return count; + + ret = elevator_change(q, name); + if (!ret) + return count; + + printk(KERN_ERR "elevator: switch to %s failed\n", name); + return ret; } ssize_t elv_iosched_show(struct request_queue *q, char *name) diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 2c958f4..926b503 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -136,6 +136,7 @@ extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t); extern int elevator_init(struct request_queue *, char *); extern void elevator_exit(struct elevator_queue *); +extern int elevator_change(struct request_queue *, const char *); extern int elv_rq_merge_ok(struct request *, struct bio *); /* -- cgit v0.10.2 From 52cc2eef31587b22ce9fbe77b064a031a9613ab0 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 23 Aug 2010 14:02:44 +0200 Subject: block: switch s390 tape_block and mg_disk to elevator_change() Now that we have this API, switch the two in-kernel users to it. Resolves an oops introduced by commit 1abec4fdbb142e3ccb6ce99832fae42129134a96. Signed-off-by: Jens Axboe diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index b82c5ce..76fa3de 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -974,8 +974,7 @@ static int mg_probe(struct platform_device *plat_dev) host->breq->queuedata = host; /* mflash is random device, thanx for the noop */ - elevator_exit(host->breq->elevator); - err = elevator_init(host->breq, "noop"); + err = elevator_change(host->breq, "noop"); if (err) { printk(KERN_ERR "%s:%d (elevator_init) fail\n", __func__, __LINE__); diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index b7de025..85cf607 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -217,8 +217,7 @@ tapeblock_setup_device(struct tape_device * device) if (!blkdat->request_queue) return -ENOMEM; - elevator_exit(blkdat->request_queue->elevator); - rc = elevator_init(blkdat->request_queue, "noop"); + rc = elevator_change(blkdat->request_queue, "noop"); if (rc) goto cleanup_queue; -- cgit v0.10.2 From 2a643ec67f9efc4b6921a3dd6e257f3b5360622b Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Wed, 25 Aug 2010 19:58:53 +0200 Subject: cciss: fix reporting of max queue depth since init The ioctl path and the scsi tape path were not accounting for their additions to the queue depth. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 7191c16..6124c2f 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -297,6 +297,8 @@ static void enqueue_cmd_and_start_io(ctlr_info_t *h, spin_lock_irqsave(&h->lock, flags); addQ(&h->reqQ, c); h->Qdepth++; + if (h->Qdepth > h->maxQsinceinit) + h->maxQsinceinit = h->Qdepth; start_io(h); spin_unlock_irqrestore(&h->lock, flags); } -- cgit v0.10.2 From 6628bc74f1aa9c35dd386320bf7ec04f12edb1b3 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 27 Aug 2010 09:15:09 +0200 Subject: writeback: do not lose wakeup events when forking bdi threads This patch fixes the following issue: INFO: task mount.nfs4:1120 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount.nfs4 D 00000000fffc6a21 0 1120 1119 0x00000000 ffff880235643948 0000000000000046 ffffffff00000000 ffffffff00000000 ffff880235643fd8 ffff880235314760 00000000001d44c0 ffff880235643fd8 00000000001d44c0 00000000001d44c0 00000000001d44c0 00000000001d44c0 Call Trace: [] schedule_timeout+0x34/0xf1 [] ? wait_for_common+0x3f/0x130 [] ? trace_hardirqs_on+0xd/0xf [] wait_for_common+0xd2/0x130 [] ? default_wake_function+0x0/0xf [] ? _raw_spin_unlock+0x26/0x2a [] wait_for_completion+0x18/0x1a [] sync_inodes_sb+0xca/0x1bc [] __sync_filesystem+0x47/0x7e [] sync_filesystem+0x47/0x4b [] generic_shutdown_super+0x22/0xd2 [] kill_anon_super+0x11/0x4f [] nfs4_kill_super+0x3f/0x72 [nfs] [] deactivate_locked_super+0x21/0x41 [] deactivate_super+0x40/0x45 [] mntput_no_expire+0xb8/0xed [] release_mounts+0x9a/0xb0 [] put_mnt_ns+0x6a/0x7b [] nfs_follow_remote_path+0x19a/0x296 [nfs] [] nfs4_try_mount+0x75/0xaf [nfs] [] nfs4_get_sb+0x276/0x2ff [nfs] [] vfs_kern_mount+0xb8/0x196 [] do_kern_mount+0x48/0xe8 [] do_mount+0x771/0x7e8 [] sys_mount+0x83/0xbd [] system_call_fastpath+0x16/0x1b The reason of this hang was a race condition: when the flusher thread is forking a bdi thread, we use 'kthread_run()', so we run it _before_ we make it visible in 'bdi->wb.task'. The bdi thread runs, does all works, and goes sleep. 'bdi->wb.task' is still NULL. And this is a dangerous time window. If at this time someone queues a work for this bdi, he does not see the bdi thread and wakes up the forker thread instead! But the forker has already forked this bdi thread, but just did not make it visible yet! The result is that we lose the wake up event for this bdi thread and the NFS4 code waits forever. To fix the problem, we should use 'ktrhead_create()' for creating bdi threads, then make them visible in 'bdi->wb.task', and only after this wake them up. This is exactly what this patch does. Signed-off-by: Artem Bityutskiy Signed-off-by: Jens Axboe diff --git a/mm/backing-dev.c b/mm/backing-dev.c index eaa4a5b..c2bf86f 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -445,8 +445,8 @@ static int bdi_forker_thread(void *ptr) switch (action) { case FORK_THREAD: __set_current_state(TASK_RUNNING); - task = kthread_run(bdi_writeback_thread, &bdi->wb, "flush-%s", - dev_name(bdi->dev)); + task = kthread_create(bdi_writeback_thread, &bdi->wb, + "flush-%s", dev_name(bdi->dev)); if (IS_ERR(task)) { /* * If thread creation fails, force writeout of @@ -457,10 +457,13 @@ static int bdi_forker_thread(void *ptr) /* * The spinlock makes sure we do not lose * wake-ups when racing with 'bdi_queue_work()'. + * And as soon as the bdi thread is visible, we + * can start it. */ spin_lock_bh(&bdi->wb_lock); bdi->wb.task = task; spin_unlock_bh(&bdi->wb_lock); + wake_up_process(task); } break; -- cgit v0.10.2 From b76b4014f9d988d2412b873e4d4c13c7f9afc4e4 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Sat, 28 Aug 2010 08:52:10 +0200 Subject: writeback: Fix lost wake-up shutting down writeback thread Setting the task state here may cause us to miss the wake up from kthread_stop(), so we need to recheck kthread_should_stop() or risk sleeping forever in the following schedule(). Symptom was an indefinite hang on an NFSv4 mount. (NFSv4 may create multiple mounts in a temporary namespace while traversing the mount path, and since the temporary namespace is immediately destroyed, it may end up destroying a mount very soon after it was created, possibly making this race more likely.) INFO: task mount.nfs4:4314 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount.nfs4 D 0000000000000000 2880 4314 4313 0x00000000 ffff88001ed6da28 0000000000000046 ffff88001ed6dfd8 ffff88001ed6dfd8 ffff88001ed6c000 ffff88001ed6c000 ffff88001ed6c000 ffff88001e5003a0 ffff88001ed6dfd8 ffff88001e5003a8 ffff88001ed6c000 ffff88001ed6dfd8 Call Trace: [] schedule_timeout+0x1cd/0x2e0 [] ? mark_held_locks+0x6c/0xa0 [] ? _raw_spin_unlock_irq+0x30/0x60 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? sub_preempt_count+0xe/0xd0 [] wait_for_common+0x120/0x190 [] ? default_wake_function+0x0/0x20 [] wait_for_completion+0x1d/0x20 [] kthread_stop+0x4a/0x150 [] ? thaw_process+0x70/0x80 [] bdi_unregister+0x10a/0x1a0 [] nfs_put_super+0x19/0x20 [] generic_shutdown_super+0x54/0xe0 [] kill_anon_super+0x16/0x60 [] nfs4_kill_super+0x39/0x90 [] deactivate_locked_super+0x45/0x60 [] deactivate_super+0x49/0x70 [] mntput_no_expire+0x84/0xe0 [] release_mounts+0x9f/0xc0 [] put_mnt_ns+0x65/0x80 [] nfs_follow_remote_path+0x1e6/0x420 [] nfs4_try_mount+0x6f/0xd0 [] nfs4_get_sb+0xa2/0x360 [] vfs_kern_mount+0x88/0x1f0 [] do_kern_mount+0x52/0x130 [] ? _lock_kernel+0x6a/0x170 [] do_mount+0x26e/0x7f0 [] ? copy_mount_options+0xea/0x190 [] sys_mount+0x98/0xf0 [] system_call_fastpath+0x16/0x1b 1 lock held by mount.nfs4/4314: #0: (&type->s_umount_key#24){+.+...}, at: [] deactivate_super+0x41/0x70 Signed-off-by: J. Bruce Fields Signed-off-by: Jens Axboe Acked-by: Artem Bityutskiy diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 7d9d06b..81e086d 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -808,7 +808,7 @@ int bdi_writeback_thread(void *data) wb->last_active = jiffies; set_current_state(TASK_INTERRUPTIBLE); - if (!list_empty(&bdi->work_list)) { + if (!list_empty(&bdi->work_list) || kthread_should_stop()) { __set_current_state(TASK_RUNNING); continue; } -- cgit v0.10.2 From edce6820a9fdda85521211cb334a183e34cc455e Mon Sep 17 00:00:00 2001 From: Jeffrey Carlyle Date: Mon, 30 Aug 2010 19:55:09 +0200 Subject: scatterlist: prevent invalid free when alloc fails When alloc fails, free_table is being called. Depending on the number of bytes requested, we determine if we are going to call _get_free_page() or kmalloc(). When alloc fails, our math is wrong (due to sg_size - 1), and the last buffer is wrongfully assumed to have been allocated by kmalloc. Hence, kfree gets called and a panic occurs. Signed-off-by: Jeffrey Carlyle Signed-off-by: Olusanya Soyannwo Acked-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/lib/scatterlist.c b/lib/scatterlist.c index a5ec428..4ceb05d 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -248,8 +248,18 @@ int __sg_alloc_table(struct sg_table *table, unsigned int nents, left -= sg_size; sg = alloc_fn(alloc_size, gfp_mask); - if (unlikely(!sg)) - return -ENOMEM; + if (unlikely(!sg)) { + /* + * Adjust entry count to reflect that the last + * entry of the previous table won't be used for + * linkage. Without this, sg_kfree() may get + * confused. + */ + if (prv) + table->nents = ++table->orig_nents; + + return -ENOMEM; + } sg_init_table(sg, alloc_size); table->nents = table->orig_nents += sg_size; -- cgit v0.10.2 From be14eb619108fa8b7120eb2c42d66d5f623ae10e Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 10 Sep 2010 09:03:21 +0200 Subject: block: Range check cpu in blk_cpu_to_group While testing CPU DLPAR, the following problem was discovered. We were DLPAR removing the first CPU, which in this case was logical CPUs 0-3. CPUs 0-2 were already marked offline and we were in the process of offlining CPU 3. After marking the CPU inactive and offline in cpu_disable, but before the cpu was completely idle (cpu_die), we ended up in __make_request on CPU 3. There we looked at the topology map to see which CPU to complete the I/O on and found no CPUs in the cpu_sibling_map. This resulted in the block layer setting the completion cpu to be NR_CPUS, which then caused an oops when we tried to complete the I/O. Fix this by sanity checking the value we return from blk_cpu_to_group to be a valid cpu value. Signed-off-by: Brian King Signed-off-by: Jens Axboe diff --git a/block/blk.h b/block/blk.h index 6e7dc87..d6b911a 100644 --- a/block/blk.h +++ b/block/blk.h @@ -142,14 +142,18 @@ static inline int queue_congestion_off_threshold(struct request_queue *q) static inline int blk_cpu_to_group(int cpu) { + int group = NR_CPUS; #ifdef CONFIG_SCHED_MC const struct cpumask *mask = cpu_coregroup_mask(cpu); - return cpumask_first(mask); + group = cpumask_first(mask); #elif defined(CONFIG_SCHED_SMT) - return cpumask_first(topology_thread_cpumask(cpu)); + group = cpumask_first(topology_thread_cpumask(cpu)); #else return cpu; #endif + if (likely(group < NR_CPUS)) + return group; + return cpu; } /* -- cgit v0.10.2