From efdd1946c44e0d5fdf36e03176705260145d122b Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Thu, 8 May 2014 15:32:46 -0400 Subject: ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG this patch removes COMMON_CLK_DEBUG config option from defconfig file as this config option is obsolete. Signed-off-by: Lad, Prabhakar Signed-off-by: Santosh Shilimkar diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 5bae195..c1f5adc 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -73,7 +73,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL030=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_EXT2_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index ec9a41d..f682648 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -146,7 +146,6 @@ CONFIG_USB_DWC3_VERBOSE=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=y CONFIG_EXT4_FS=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index b5df4a5..28287ae 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -62,7 +62,6 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_TMPFS=y CONFIG_NFS_FS=y diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig index f052017..9e7a256 100644 --- a/arch/arm/configs/vt8500_v6_v7_defconfig +++ b/arch/arm/configs/vt8500_v6_v7_defconfig @@ -73,7 +73,6 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_VT8500=y CONFIG_DMADEVICES=y -CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PWM=y CONFIG_PWM_VT8500=y -- cgit v0.10.2 From 27379350a9cb6f39e136325d33b9cc9357da263e Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 8 May 2014 15:34:28 -0400 Subject: ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80) This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. Signed-off-by: Brian Norris Signed-off-by: Santosh Shilimkar diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index f682648..07b4327 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -112,6 +112,7 @@ CONFIG_MTD_PLATRAM=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_DAVINCI=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y -- cgit v0.10.2 From 5eb3da7246a5b2dfac9f38a7be62b1a0295584c7 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 13 Jun 2013 19:24:39 -0400 Subject: ARM: keystone: Switch over to coherent memory address space With late code patching updates for LPAE machines has merged now and memblock conversion from bootmem is on its way, Keystone can switch to the coherent memory address space which starts beyond 4GB boundary. The idmap alias needs are managed via virt_to_idmap() for boot purpose. Tested-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index e0b9e1b..155eb06 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -20,6 +20,9 @@ #include #include #include +#include + +#include "memory.h" #include "keystone.h" @@ -45,6 +48,50 @@ static void __init keystone_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } +static phys_addr_t keystone_virt_to_idmap(unsigned long x) +{ + return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START; +} + +static void __init keystone_init_meminfo(void) +{ + bool lpae = IS_ENABLED(CONFIG_ARM_LPAE); + bool pvpatch = IS_ENABLED(CONFIG_ARM_PATCH_PHYS_VIRT); + phys_addr_t offset = PHYS_OFFSET - KEYSTONE_LOW_PHYS_START; + phys_addr_t mem_start, mem_end; + + BUG_ON(meminfo.nr_banks < 1); + mem_start = meminfo.bank[0].start; + mem_end = mem_start + meminfo.bank[0].size - 1; + + /* nothing to do if we are running out of the <32-bit space */ + if (mem_start >= KEYSTONE_LOW_PHYS_START && + mem_end <= KEYSTONE_LOW_PHYS_END) + return; + + if (!lpae || !pvpatch) { + pr_crit("Enable %s%s%s to run outside 32-bit space\n", + !lpae ? __stringify(CONFIG_ARM_LPAE) : "", + (!lpae && !pvpatch) ? " and " : "", + !pvpatch ? __stringify(CONFIG_ARM_PATCH_PHYS_VIRT) : ""); + } + + if (mem_start < KEYSTONE_HIGH_PHYS_START || + mem_end > KEYSTONE_HIGH_PHYS_END) { + pr_crit("Invalid address space for memory (%08llx-%08llx)\n", + (u64)mem_start, (u64)mem_end); + } + + offset += KEYSTONE_HIGH_PHYS_START; + __pv_phys_pfn_offset = PFN_DOWN(offset); + __pv_offset = (offset - PAGE_OFFSET); + + /* Populate the arch idmap hook */ + arch_virt_to_idmap = keystone_virt_to_idmap; + + pr_info("Switching to high address space at 0x%llx\n", (u64)offset); +} + static const char *keystone_match[] __initconst = { "ti,keystone", NULL, @@ -76,4 +123,5 @@ DT_MACHINE_START(KEYSTONE, "Keystone") .init_machine = keystone_init, .dt_compat = keystone_match, .restart = keystone_restart, + .init_meminfo = keystone_init_meminfo, MACHINE_END diff --git a/arch/arm/mach-keystone/memory.h b/arch/arm/mach-keystone/memory.h new file mode 100644 index 0000000..b854fb1 --- /dev/null +++ b/arch/arm/mach-keystone/memory.h @@ -0,0 +1,24 @@ +/* + * Copyright 2014 Texas Instruments, Inc. + * Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#ifndef __MEMORY_H +#define __MEMORY_H + +#define MAX_PHYSMEM_BITS 36 +#define SECTION_SIZE_BITS 34 + +#define KEYSTONE_LOW_PHYS_START 0x80000000ULL +#define KEYSTONE_LOW_PHYS_SIZE 0x80000000ULL /* 2G */ +#define KEYSTONE_LOW_PHYS_END (KEYSTONE_LOW_PHYS_START + \ + KEYSTONE_LOW_PHYS_SIZE - 1) + +#define KEYSTONE_HIGH_PHYS_START 0x800000000ULL +#define KEYSTONE_HIGH_PHYS_SIZE 0x400000000ULL /* 16G */ +#define KEYSTONE_HIGH_PHYS_END (KEYSTONE_HIGH_PHYS_START + \ + KEYSTONE_HIGH_PHYS_SIZE - 1) +#endif /* __MEMORY_H */ diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 5cf0683..5f46a7c 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -17,13 +17,16 @@ #include #include +#include +#include +#include #include "keystone.h" static int keystone_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long start = virt_to_phys(&secondary_startup); + unsigned long start = virt_to_idmap(&secondary_startup); int error; pr_debug("keystone-smp: booting cpu %d, vector %08lx\n", @@ -36,6 +39,19 @@ static int keystone_smp_boot_secondary(unsigned int cpu, return error; } +#ifdef CONFIG_ARM_LPAE +static void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) +{ + pgd_t *pgd0 = pgd_offset_k(0); + cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET); + local_flush_tlb_all(); +} +#else +static inline void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) +{} +#endif + struct smp_operations keystone_smp_ops __initdata = { .smp_boot_secondary = keystone_smp_boot_secondary, + .smp_secondary_init = keystone_smp_secondary_initmem, }; -- cgit v0.10.2 From 14f3791439b5a6cf12127fb80204265533d92664 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 24 Feb 2014 17:32:59 +0200 Subject: ARM: keystone: Update the dma offset for non-dt platform devices Tested-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index 155eb06..59b8383 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -31,6 +31,27 @@ #define PLL_RESET BIT(16) static void __iomem *keystone_rstctrl; +static struct notifier_block platform_nb; +static unsigned long keystone_dma_pfn_offset __read_mostly; + +static int keystone_platform_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct device *dev = data; + + if (event != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; + + if (!dev) + return NOTIFY_BAD; + + if (!dev->of_node) { + dev->dma_pfn_offset = keystone_dma_pfn_offset; + dev_err(dev, "set dma_pfn_offset%08lx\n", + dev->dma_pfn_offset); + } + return NOTIFY_OK; +} static void __init keystone_init(void) { @@ -45,6 +66,8 @@ static void __init keystone_init(void) pr_warn("ti,keystone-reset iomap error\n"); keystone_pm_runtime_init(); + if (platform_nb.notifier_call) + bus_register_notifier(&platform_bus_type, &platform_nb); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -88,6 +111,9 @@ static void __init keystone_init_meminfo(void) /* Populate the arch idmap hook */ arch_virt_to_idmap = keystone_virt_to_idmap; + platform_nb.notifier_call = keystone_platform_notifier; + keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START - + KEYSTONE_LOW_PHYS_START); pr_info("Switching to high address space at 0x%llx\n", (u64)offset); } -- cgit v0.10.2 From b7ae8bf7bf3c9db304aa582e5c26fc74ae636998 Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Fri, 23 May 2014 16:53:58 -0400 Subject: ARM: keystone: remove redundant reset stuff Remove reset stuff in flavour of using keystone reset driver: driver/power/reset/keystone-reset.c Reviewed-by: Arnd Bergmann Signed-off-by: Ivan Khoronzhuk Signed-off-by: Santosh Shilimkar diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index 59b8383..1f9ae89 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -26,11 +26,6 @@ #include "keystone.h" -#define PLL_RESET_WRITE_KEY_MASK 0xffff0000 -#define PLL_RESET_WRITE_KEY 0x5a69 -#define PLL_RESET BIT(16) - -static void __iomem *keystone_rstctrl; static struct notifier_block platform_nb; static unsigned long keystone_dma_pfn_offset __read_mostly; @@ -55,16 +50,6 @@ static int keystone_platform_notifier(struct notifier_block *nb, static void __init keystone_init(void) { - struct device_node *node; - - node = of_find_compatible_node(NULL, NULL, "ti,keystone-reset"); - if (WARN_ON(!node)) - pr_warn("ti,keystone-reset node undefined\n"); - - keystone_rstctrl = of_iomap(node, 0); - if (WARN_ON(!keystone_rstctrl)) - pr_warn("ti,keystone-reset iomap error\n"); - keystone_pm_runtime_init(); if (platform_nb.notifier_call) bus_register_notifier(&platform_bus_type, &platform_nb); @@ -123,24 +108,6 @@ static const char *keystone_match[] __initconst = { NULL, }; -void keystone_restart(enum reboot_mode mode, const char *cmd) -{ - u32 val; - - BUG_ON(!keystone_rstctrl); - - /* Enable write access to RSTCTRL */ - val = readl(keystone_rstctrl); - val &= PLL_RESET_WRITE_KEY_MASK; - val |= PLL_RESET_WRITE_KEY; - writel(val, keystone_rstctrl); - - /* Reset the SOC */ - val = readl(keystone_rstctrl); - val &= ~PLL_RESET; - writel(val, keystone_rstctrl); -} - DT_MACHINE_START(KEYSTONE, "Keystone") #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) .dma_zone_size = SZ_2G, @@ -148,6 +115,5 @@ DT_MACHINE_START(KEYSTONE, "Keystone") .smp = smp_ops(keystone_smp_ops), .init_machine = keystone_init, .dt_compat = keystone_match, - .restart = keystone_restart, .init_meminfo = keystone_init_meminfo, MACHINE_END -- cgit v0.10.2 From ded79bebcace01c803c8b71871fd13c90ca5cffd Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Fri, 23 May 2014 16:34:55 -0400 Subject: ARM: dts: keystone: update reset node to work with reset driver The pll controller register set and device state control registers include sets of registers with different purposes, so it's logically to add syscon entry to be able to access them from appropriate places. So added pll controller and device state control syscon entries. The keystone driver requires the next additional properties: "ti,syscon-pll" - phandle/offset pair. The phandle to syscon used to access pll controller registers and the offset to use reset control registers. "ti,syscon-dev" - phandle/offset pair. The phandle to syscon used to access device state control registers and the offset in order to use mux block registers for all watchdogs. "ti,wdt-list" - option to declare what watchdogs are used to reboot the SoC, so set "0" WDT as default. Reviewed-by: Arnd Bergmann Signed-off-by: Ivan Khoronzhuk Signed-off-by: Santosh Shilimkar diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 90823eb..a8052fd 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -67,9 +67,21 @@ interrupt-parent = <&gic>; ranges = <0x0 0x0 0x0 0xc0000000>; + pllctrl: pll-controller@02310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; + }; + + devctrl: device-state-control@02620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; + }; + rstctrl: reset-controller { compatible = "ti,keystone-reset"; - reg = <0x023100e8 4>; /* pll reset control reg */ + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>; }; /include/ "keystone-clocks.dtsi" -- cgit v0.10.2 From 6234ca670d5703ee4d22042e974657c57fe8364b Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Fri, 23 May 2014 16:34:55 -0400 Subject: ARM: configs: keystone: enable reset driver support Enable reset driver support in order to have opportunity to reboot SoC by watchdog and by software. Reviewed-by: Arnd Bergmann Signed-off-by: Ivan Khoronzhuk [santosh.shilimkar@ti.com: Fixed the subject line] Signed-off-by: Santosh Shilimkar diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 07b4327..dc0da3f 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -132,6 +132,9 @@ CONFIG_SPI=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_KEYSTONE=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y CONFIG_DAVINCI_WATCHDOG=y -- cgit v0.10.2 From 06fde1a014611a7902a874330d10e530312ceaef Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 4 Jun 2014 11:00:18 +0200 Subject: ARM: orion5x: fix mvebu_mbus_dt_init call The prototype for mvebu_mbus_dt_init() changed around the same time as a new caller was added to orion5x. This adds the missing argument to make orion5x behave correctly. Signed-off-by: Arnd Bergmann Acked-by: Thomas Petazzoni diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 35d418f..79f033b 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -45,7 +45,7 @@ static void __init orion5x_dt_init(void) orion5x_id(&dev, &rev, &dev_name); printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); /* * Setup Orion address map -- cgit v0.10.2 From bbea06f3efbae5776e6c285fea59fd249eec44ff Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 5 Jun 2014 15:22:52 -0400 Subject: ARM: keystone: Drop use of meminfo since its not available anymore Laura's series removed the meminfo structure and its no longer available. Update keystone code to remove the usage of it. Reported-by: Russell King - ARM Linux Signed-off-by: Santosh Shilimkar Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index 1f9ae89..7f352de 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -68,9 +69,8 @@ static void __init keystone_init_meminfo(void) phys_addr_t offset = PHYS_OFFSET - KEYSTONE_LOW_PHYS_START; phys_addr_t mem_start, mem_end; - BUG_ON(meminfo.nr_banks < 1); - mem_start = meminfo.bank[0].start; - mem_end = mem_start + meminfo.bank[0].size - 1; + mem_start = memblock_start_of_DRAM(); + mem_end = memblock_end_of_DRAM(); /* nothing to do if we are running out of the <32-bit space */ if (mem_start >= KEYSTONE_LOW_PHYS_START && -- cgit v0.10.2