From 637b4caeedde9b926de6e66d68d0951b0f0c83ef Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 1 Jul 2013 14:14:46 -0700 Subject: Bluetooth: Fix simple whitespace vs tab style issue Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index e3a3499..b821b19 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -605,7 +605,7 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt) * as supported send it. If not supported assume that the controller * does not have actual support for stored link keys which makes this * command redundant anyway. - */ + */ if (hdev->commands[6] & 0x80) { struct hci_cp_delete_stored_link_key cp; -- cgit v0.10.2 From a77b15a60cb1d54d87e8794bfbc94c9ccee679ed Mon Sep 17 00:00:00 2001 From: Mikel Astiz Date: Fri, 28 Jun 2013 10:56:27 +0200 Subject: Bluetooth: Add HCI authentication capabilities macros Add macros for the HCI capabilities as described in the Bluetooth Core Specification v4.0, Volume 2, part E, section 7.1.29. Signed-off-by: Mikel Astiz Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 3c592cf..a01fbb4 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -296,6 +296,12 @@ enum { #define HCI_AT_GENERAL_BONDING 0x04 #define HCI_AT_GENERAL_BONDING_MITM 0x05 +/* I/O capabilities */ +#define HCI_IO_DISPLAY_ONLY 0x00 +#define HCI_IO_DISPLAY_YESNO 0x01 +#define HCI_IO_KEYBOARD_ONLY 0x02 +#define HCI_IO_NO_INPUT_OUTPUT 0x03 + /* Link Key types */ #define HCI_LK_COMBINATION 0x00 #define HCI_LK_LOCAL_UNIT 0x01 -- cgit v0.10.2 From acabae96df2dff253f831e94c33ef9f0f15600d0 Mon Sep 17 00:00:00 2001 From: Mikel Astiz Date: Fri, 28 Jun 2013 10:56:28 +0200 Subject: Bluetooth: Use defines in in hci_get_auth_req() Make the code in hci_get_auth_req() more readable by using the defined macros instead of inlining magic numbers. Signed-off-by: Mikel Astiz Signed-off-by: Timo Mueller Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 0437200..ce8be0b 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -3024,17 +3024,20 @@ unlock: static u8 hci_get_auth_req(struct hci_conn *conn) { /* If remote requests dedicated bonding follow that lead */ - if (conn->remote_auth == 0x02 || conn->remote_auth == 0x03) { + if (conn->remote_auth == HCI_AT_DEDICATED_BONDING || + conn->remote_auth == HCI_AT_DEDICATED_BONDING_MITM) { /* If both remote and local IO capabilities allow MITM * protection then require it, otherwise don't */ - if (conn->remote_cap == 0x03 || conn->io_capability == 0x03) - return 0x02; + if (conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT || + conn->io_capability == HCI_IO_NO_INPUT_OUTPUT) + return HCI_AT_DEDICATED_BONDING; else - return 0x03; + return HCI_AT_DEDICATED_BONDING_MITM; } /* If remote requests no-bonding follow that lead */ - if (conn->remote_auth == 0x00 || conn->remote_auth == 0x01) + if (conn->remote_auth == HCI_AT_NO_BONDING || + conn->remote_auth == HCI_AT_NO_BONDING_MITM) return conn->remote_auth | (conn->auth_type & 0x01); return conn->auth_type; -- cgit v0.10.2 From a767631ad1c2e785f4a8fcad26bcf50eb5786373 Mon Sep 17 00:00:00 2001 From: Mikel Astiz Date: Fri, 28 Jun 2013 10:56:29 +0200 Subject: Bluetooth: Use defines instead of integer literals Replace the occurrences of integer literals in hci_event.c with the newly introduced macros in hci.h. Signed-off-by: Mikel Astiz Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index ce8be0b..50e39f4 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -3069,7 +3069,7 @@ static void hci_io_capa_request_evt(struct hci_dev *hdev, struct sk_buff *skb) /* Change the IO capability from KeyboardDisplay * to DisplayYesNo as it is not supported by BT spec. */ cp.capability = (conn->io_capability == 0x04) ? - 0x01 : conn->io_capability; + HCI_IO_DISPLAY_YESNO : conn->io_capability; conn->auth_type = hci_get_auth_req(conn); cp.authentication = conn->auth_type; @@ -3143,7 +3143,8 @@ static void hci_user_confirm_request_evt(struct hci_dev *hdev, * request. The only exception is when we're dedicated bonding * initiators (connect_cfm_cb set) since then we always have the MITM * bit set. */ - if (!conn->connect_cfm_cb && loc_mitm && conn->remote_cap == 0x03) { + if (!conn->connect_cfm_cb && loc_mitm && + conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) { BT_DBG("Rejecting request: remote device can't provide MITM"); hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_NEG_REPLY, sizeof(ev->bdaddr), &ev->bdaddr); @@ -3151,8 +3152,8 @@ static void hci_user_confirm_request_evt(struct hci_dev *hdev, } /* If no side requires MITM protection; auto-accept */ - if ((!loc_mitm || conn->remote_cap == 0x03) && - (!rem_mitm || conn->io_capability == 0x03)) { + if ((!loc_mitm || conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) && + (!rem_mitm || conn->io_capability == HCI_IO_NO_INPUT_OUTPUT)) { /* If we're not the initiators request authorization to * proceed from user space (mgmt_user_confirm with -- cgit v0.10.2 From 1c244f79c0d6abf8634faedb9b042122481c3572 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Fri, 7 Dec 2012 03:29:10 -0200 Subject: Bluetooth: Add missing braces to an "else if" Trivial change in the coding style. Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 8c3499be..b3bb7bc 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1415,8 +1415,9 @@ static void l2cap_conn_ready(struct l2cap_conn *conn) sk->sk_state_change(sk); release_sock(sk); - } else if (chan->state == BT_CONNECT) + } else if (chan->state == BT_CONNECT) { l2cap_do_start(chan); + } l2cap_chan_unlock(chan); } -- cgit v0.10.2 From 2583d706a13d0dc7fa591d5bb036454d0ddbf5b0 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 11 Jul 2013 15:41:29 +0200 Subject: Bluetooth: hidp: implement hidinput_input_event callback We can re-enable hidinput_input_event to allow the leds of bluetooth keyboards to be set. Now the callbacks uses hid core to retrieve the right HID report to send, so this version is safer. Signed-off-by: Benjamin Tissoires Reviewed-by: David Herrmann Acked-by: Jiri Kosina Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 0c699cd..2977bf7 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -238,6 +238,31 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep return hidp_send_intr_message(session, hdr, buf, rsize); } +static int hidp_hidinput_event(struct input_dev *dev, unsigned int type, + unsigned int code, int value) +{ + struct hid_device *hid = input_get_drvdata(dev); + struct hidp_session *session = hid->driver_data; + struct hid_field *field; + int offset; + + BT_DBG("session %p type %d code %d value %d", + session, type, code, value); + + if (type != EV_LED) + return -1; + + offset = hidinput_find_field(hid, type, code, &field); + if (offset == -1) { + hid_warn(dev, "event field not found\n"); + return -1; + } + + hid_set_field(field, offset, value); + + return hidp_send_report(session, field->report); +} + static int hidp_get_raw_report(struct hid_device *hid, unsigned char report_number, unsigned char *data, size_t count, @@ -711,6 +736,7 @@ static struct hid_ll_driver hidp_hid_driver = { .stop = hidp_stop, .open = hidp_open, .close = hidp_close, + .hidinput_input_event = hidp_hidinput_event, }; /* This function sets up the hid device. It does not add it -- cgit v0.10.2 From 159d865f2078ffa4441abb0155f725368371f836 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 11 Jul 2013 15:41:30 +0200 Subject: Bluetooth: hidp: remove wrong send_report at init The USB hid implementation does retrieve the reports during the start. However, this implementation does not call the HID command GET_REPORT (which would fetch the current status of each report), but use the DATA command, which is an Output Report (so transmitting data from the host to the device). The Wiimote controller is already guarded against this problem in the protocol, but it is not conformant to the specification to set all the reports to 0 on start. Signed-off-by: Benjamin Tissoires Reviewed-by: David Herrmann Acked-by: Jiri Kosina Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 2977bf7..13863de 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -703,20 +703,6 @@ static int hidp_parse(struct hid_device *hid) static int hidp_start(struct hid_device *hid) { - struct hidp_session *session = hid->driver_data; - struct hid_report *report; - - if (hid->quirks & HID_QUIRK_NO_INIT_REPORTS) - return 0; - - list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT]. - report_list, list) - hidp_send_report(session, report); - - list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT]. - report_list, list) - hidp_send_report(session, report); - return 0; } -- cgit v0.10.2 From 473c13179c5828f7123a4d9fe449d8bd79fae254 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Fri, 19 Jul 2013 16:09:38 +0900 Subject: Bluetooth: replace strict_strtol() with kstrtol() The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c index db2c3c3..023d35e 100644 --- a/drivers/bluetooth/btmrvl_debugfs.c +++ b/drivers/bluetooth/btmrvl_debugfs.c @@ -43,7 +43,7 @@ static ssize_t btmrvl_hscfgcmd_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; - ret = strict_strtol(buf, 10, &result); + ret = kstrtol(buf, 10, &result); if (ret) return ret; @@ -89,7 +89,7 @@ static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; - ret = strict_strtol(buf, 10, &result); + ret = kstrtol(buf, 10, &result); if (ret) return ret; @@ -135,7 +135,7 @@ static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; - ret = strict_strtol(buf, 10, &result); + ret = kstrtol(buf, 10, &result); if (ret) return ret; -- cgit v0.10.2 From ba0ccd7affd777cb90ad7279de4143663ae4d485 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Mon, 22 Jul 2013 14:25:28 +0200 Subject: ath10k: improve tx throughput on slow machines It is more efficient to move just the 802.11 header instead of the whole payload in most cases. This has no measurable effect on modern hardware. It should improve performance by a few percent on hardware such as an Access Point that have a slow CPU compared to a typical desktop CPU. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index d0a7761..6e01ef6 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1406,9 +1406,9 @@ static void ath10k_tx_h_qos_workaround(struct ieee80211_hw *hw, return; qos_ctl = ieee80211_get_qos_ctl(hdr); - memmove(qos_ctl, qos_ctl + IEEE80211_QOS_CTL_LEN, - skb->len - ieee80211_hdrlen(hdr->frame_control)); - skb_trim(skb, skb->len - IEEE80211_QOS_CTL_LEN); + memmove(skb->data + IEEE80211_QOS_CTL_LEN, + skb->data, (void *)qos_ctl - (void *)skb->data); + skb_pull(skb, IEEE80211_QOS_CTL_LEN); } static void ath10k_tx_h_update_wep_key(struct sk_buff *skb) -- cgit v0.10.2 From 8865bee4835441d9b3220d779d254d5856a68af0 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 24 Jul 2013 12:36:46 +0200 Subject: ath10k: detect the number of spatial streams supported by hw Until now ath10k assumed 3 spatial streams. However some devices support only 2 spatial streams. This patch improves performance on devices that don't support 3 spatial streams. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 9f21ecb..ff42bb7 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -285,6 +285,7 @@ struct ath10k { u32 hw_max_tx_power; u32 ht_cap_info; u32 vht_cap_info; + u32 num_rf_chains; struct targetdef *targetdef; struct hostdef *hostdef; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 6e01ef6..344ad27 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3093,19 +3093,18 @@ static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) { struct ieee80211_sta_vht_cap vht_cap = {0}; u16 mcs_map; + int i; vht_cap.vht_supported = 1; vht_cap.cap = ar->vht_cap_info; - /* FIXME: check dynamically how many streams board supports */ - mcs_map = IEEE80211_VHT_MCS_SUPPORT_0_9 << 0 | - IEEE80211_VHT_MCS_SUPPORT_0_9 << 2 | - IEEE80211_VHT_MCS_SUPPORT_0_9 << 4 | - IEEE80211_VHT_MCS_NOT_SUPPORTED << 6 | - IEEE80211_VHT_MCS_NOT_SUPPORTED << 8 | - IEEE80211_VHT_MCS_NOT_SUPPORTED << 10 | - IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 | - IEEE80211_VHT_MCS_NOT_SUPPORTED << 14; + mcs_map = 0; + for (i = 0; i < 8; i++) { + if (i < ar->num_rf_chains) + mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i*2); + else + mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i*2); + } vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map); vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map); @@ -3168,7 +3167,7 @@ static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar) if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK) ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU; - for (i = 0; i < WMI_MAX_SPATIAL_STREAM; i++) + for (i = 0; i < ar->num_rf_chains; i++) ht_cap.mcs.rx_mask[i] = 0xFF; ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 5e42460..1cbcb2e 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -868,6 +868,13 @@ static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar, (__le32_to_cpu(ev->sw_version_1) & 0xffff0000) >> 16; ar->fw_version_build = (__le32_to_cpu(ev->sw_version_1) & 0x0000ffff); ar->phy_capability = __le32_to_cpu(ev->phy_capability); + ar->num_rf_chains = __le32_to_cpu(ev->num_rf_chains); + + if (ar->num_rf_chains > WMI_MAX_SPATIAL_STREAM) { + ath10k_warn("hardware advertises support for more spatial streams than it should (%d > %d)\n", + ar->num_rf_chains, WMI_MAX_SPATIAL_STREAM); + ar->num_rf_chains = WMI_MAX_SPATIAL_STREAM; + } ar->ath_common.regulatory.current_rd = __le32_to_cpu(ev->hal_reg_capabilities.eeprom_rd); @@ -892,7 +899,7 @@ static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar, } ath10k_dbg(ATH10K_DBG_WMI, - "wmi event service ready sw_ver 0x%08x sw_ver1 0x%08x abi_ver %u phy_cap 0x%08x ht_cap 0x%08x vht_cap 0x%08x vht_supp_msc 0x%08x sys_cap_info 0x%08x mem_reqs %u\n", + "wmi event service ready sw_ver 0x%08x sw_ver1 0x%08x abi_ver %u phy_cap 0x%08x ht_cap 0x%08x vht_cap 0x%08x vht_supp_msc 0x%08x sys_cap_info 0x%08x mem_reqs %u num_rf_chains %u\n", __le32_to_cpu(ev->sw_version), __le32_to_cpu(ev->sw_version_1), __le32_to_cpu(ev->abi_version), @@ -901,7 +908,8 @@ static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar, __le32_to_cpu(ev->vht_cap_info), __le32_to_cpu(ev->vht_supp_mcs), __le32_to_cpu(ev->sys_cap_info), - __le32_to_cpu(ev->num_mem_reqs)); + __le32_to_cpu(ev->num_mem_reqs), + __le32_to_cpu(ev->num_rf_chains)); complete(&ar->wmi.service_ready); } -- cgit v0.10.2 From 605f81aae7cfe4f61d0a5ee5f588f4956413858c Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 31 Jul 2013 10:47:56 +0200 Subject: ath10k: implement rx checksum offloading HW supports L3/L4 rx checksum offloading. This should reduce CPU load and improve performance on slow host machines. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 04f08d9..e784c40 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -804,6 +804,37 @@ static bool ath10k_htt_rx_has_fcs_err(struct sk_buff *skb) return false; } +static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb) +{ + struct htt_rx_desc *rxd; + u32 flags, info; + bool is_ip4, is_ip6; + bool is_tcp, is_udp; + bool ip_csum_ok, tcpudp_csum_ok; + + rxd = (void *)skb->data - sizeof(*rxd); + flags = __le32_to_cpu(rxd->attention.flags); + info = __le32_to_cpu(rxd->msdu_start.info1); + + is_ip4 = !!(info & RX_MSDU_START_INFO1_IPV4_PROTO); + is_ip6 = !!(info & RX_MSDU_START_INFO1_IPV6_PROTO); + is_tcp = !!(info & RX_MSDU_START_INFO1_TCP_PROTO); + is_udp = !!(info & RX_MSDU_START_INFO1_UDP_PROTO); + ip_csum_ok = !(flags & RX_ATTENTION_FLAGS_IP_CHKSUM_FAIL); + tcpudp_csum_ok = !(flags & RX_ATTENTION_FLAGS_TCP_UDP_CHKSUM_FAIL); + + if (!is_ip4 && !is_ip6) + return CHECKSUM_NONE; + if (!is_tcp && !is_udp) + return CHECKSUM_NONE; + if (!ip_csum_ok) + return CHECKSUM_NONE; + if (!tcpudp_csum_ok) + return CHECKSUM_NONE; + + return CHECKSUM_UNNECESSARY; +} + static void ath10k_htt_rx_handler(struct ath10k_htt *htt, struct htt_rx_indication *rx) { @@ -815,6 +846,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt, u8 *fw_desc; int i, j; int ret; + int ip_summed; memset(&info, 0, sizeof(info)); @@ -889,6 +921,11 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt, continue; } + /* The skb is not yet processed and it may be + * reallocated. Since the offload is in the original + * skb extract the checksum now and assign it later */ + ip_summed = ath10k_htt_rx_get_csum_state(msdu_head); + info.skb = msdu_head; info.fcs_err = ath10k_htt_rx_has_fcs_err(msdu_head); info.signal = ATH10K_DEFAULT_NOISE_FLOOR; @@ -914,6 +951,8 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt, if (ath10k_htt_rx_hdr_is_amsdu((void *)info.skb->data)) ath10k_dbg(ATH10K_DBG_HTT, "htt mpdu is amsdu\n"); + info.skb->ip_summed = ip_summed; + ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt mpdu: ", info.skb->data, info.skb->len); ath10k_process_rx(htt->ar, &info); @@ -980,6 +1019,7 @@ static void ath10k_htt_rx_frag_handler(struct ath10k_htt *htt, info.status = HTT_RX_IND_MPDU_STATUS_OK; info.encrypt_type = MS(__le32_to_cpu(rxd->mpdu_start.info0), RX_MPDU_START_INFO0_ENCRYPT_TYPE); + info.skb->ip_summed = ath10k_htt_rx_get_csum_state(info.skb); if (tkip_mic_err) { ath10k_warn("tkip mic error\n"); -- cgit v0.10.2 From 7c199997ded6c90fd45a50f49e9ac63adaacb95e Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 31 Jul 2013 10:47:57 +0200 Subject: ath10k: implement tx checksum offloading HW supports L3/L4 tx checksum offloading. This should reduce CPU load and improve performance on slow host machines. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index dc3f3e8..656c254 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -465,6 +465,8 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) flags1 = 0; flags1 |= SM((u16)vdev_id, HTT_DATA_TX_DESC_FLAGS1_VDEV_ID); flags1 |= SM((u16)tid, HTT_DATA_TX_DESC_FLAGS1_EXT_TID); + flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD; + flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD; frags_paddr = ATH10K_SKB_CB(txfrag)->paddr; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 344ad27..5784337 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3309,6 +3309,8 @@ int ath10k_mac_register(struct ath10k *ar) ar->hw->wiphy->iface_combinations = &ath10k_if_comb; ar->hw->wiphy->n_iface_combinations = 1; + ar->hw->netdev_features = NETIF_F_HW_CSUM; + ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy, ath10k_reg_notifier); if (ret) { -- cgit v0.10.2 From 2e1dea40512d7e99a7e91ac88a6f434a5d7c6fde Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 31 Jul 2013 10:32:40 +0200 Subject: ath10k: implement get_survey() This implements a limited subset of what can be reported in the survey dump. This can be used for assessing approximate channel load, e.g. for automatic channel selection. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index ff42bb7..e4bba56 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -38,6 +38,7 @@ #define ATH10K_SCAN_ID 0 #define WMI_READY_TIMEOUT (5 * HZ) #define ATH10K_FLUSH_TIMEOUT_HZ (5*HZ) +#define ATH10K_NUM_CHANS 38 /* Antenna noise floor */ #define ATH10K_DEFAULT_NOISE_FLOOR -95 @@ -375,6 +376,12 @@ struct ath10k { struct work_struct restart_work; + /* cycle count is reported twice for each visited channel during scan. + * access protected by data_lock */ + u32 survey_last_rx_clear_count; + u32 survey_last_cycle_count; + struct survey_info survey[ATH10K_NUM_CHANS]; + #ifdef CONFIG_ATH10K_DEBUGFS struct ath10k_debug debug; #endif diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 5784337..9ea31f8 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2934,6 +2934,41 @@ static void ath10k_restart_complete(struct ieee80211_hw *hw) mutex_unlock(&ar->conf_mutex); } +static int ath10k_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) +{ + struct ath10k *ar = hw->priv; + struct ieee80211_supported_band *sband; + struct survey_info *ar_survey = &ar->survey[idx]; + int ret = 0; + + mutex_lock(&ar->conf_mutex); + + sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ]; + if (sband && idx >= sband->n_channels) { + idx -= sband->n_channels; + sband = NULL; + } + + if (!sband) + sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ]; + + if (!sband || idx >= sband->n_channels) { + ret = -ENOENT; + goto exit; + } + + spin_lock_bh(&ar->data_lock); + memcpy(survey, ar_survey, sizeof(*survey)); + spin_unlock_bh(&ar->data_lock); + + survey->channel = &sband->channels[idx]; + +exit: + mutex_unlock(&ar->conf_mutex); + return ret; +} + static const struct ieee80211_ops ath10k_ops = { .tx = ath10k_tx, .start = ath10k_start, @@ -2955,6 +2990,7 @@ static const struct ieee80211_ops ath10k_ops = { .flush = ath10k_flush, .tx_last_beacon = ath10k_tx_last_beacon, .restart_complete = ath10k_restart_complete, + .get_survey = ath10k_get_survey, #ifdef CONFIG_PM .suspend = ath10k_suspend, .resume = ath10k_resume, diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 1cbcb2e..55f90c7 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -390,9 +390,82 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb) return 0; } +static int freq_to_idx(struct ath10k *ar, int freq) +{ + struct ieee80211_supported_band *sband; + int band, ch, idx = 0; + + for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) { + sband = ar->hw->wiphy->bands[band]; + if (!sband) + continue; + + for (ch = 0; ch < sband->n_channels; ch++, idx++) + if (sband->channels[ch].center_freq == freq) + goto exit; + } + +exit: + return idx; +} + static void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb) { - ath10k_dbg(ATH10K_DBG_WMI, "WMI_CHAN_INFO_EVENTID\n"); + struct wmi_chan_info_event *ev; + struct survey_info *survey; + u32 err_code, freq, cmd_flags, noise_floor, rx_clear_count, cycle_count; + int idx; + + ev = (struct wmi_chan_info_event *)skb->data; + + err_code = __le32_to_cpu(ev->err_code); + freq = __le32_to_cpu(ev->freq); + cmd_flags = __le32_to_cpu(ev->cmd_flags); + noise_floor = __le32_to_cpu(ev->noise_floor); + rx_clear_count = __le32_to_cpu(ev->rx_clear_count); + cycle_count = __le32_to_cpu(ev->cycle_count); + + ath10k_dbg(ATH10K_DBG_WMI, + "chan info err_code %d freq %d cmd_flags %d noise_floor %d rx_clear_count %d cycle_count %d\n", + err_code, freq, cmd_flags, noise_floor, rx_clear_count, + cycle_count); + + spin_lock_bh(&ar->data_lock); + + if (!ar->scan.in_progress) { + ath10k_warn("chan info event without a scan request?\n"); + goto exit; + } + + idx = freq_to_idx(ar, freq); + if (idx >= ARRAY_SIZE(ar->survey)) { + ath10k_warn("chan info: invalid frequency %d (idx %d out of bounds)\n", + freq, idx); + goto exit; + } + + if (cmd_flags & WMI_CHAN_INFO_FLAG_COMPLETE) { + /* During scanning chan info is reported twice for each + * visited channel. The reported cycle count is global + * and per-channel cycle count must be calculated */ + + cycle_count -= ar->survey_last_cycle_count; + rx_clear_count -= ar->survey_last_rx_clear_count; + + survey = &ar->survey[idx]; + survey->channel_time = WMI_CHAN_INFO_MSEC(cycle_count); + survey->channel_time_rx = WMI_CHAN_INFO_MSEC(rx_clear_count); + survey->noise = noise_floor; + survey->filled = SURVEY_INFO_CHANNEL_TIME | + SURVEY_INFO_CHANNEL_TIME_RX | + SURVEY_INFO_NOISE_DBM; + } + + ar->survey_last_rx_clear_count = rx_clear_count; + ar->survey_last_cycle_count = cycle_count; + +exit: + spin_unlock_bh(&ar->data_lock); } static void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb) diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index da3b2bc..2c5a4f8 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -2931,6 +2931,11 @@ struct wmi_chan_info_event { __le32 cycle_count; } __packed; +#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) + +/* FIXME: empirically extrapolated */ +#define WMI_CHAN_INFO_MSEC(x) ((x) / 76595) + /* Beacon filter wmi command info */ #define BCN_FLT_MAX_SUPPORTED_IES 256 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) -- cgit v0.10.2 From 432358ed1d18c19dbf89008325ff6ba662d0996e Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 31 Jul 2013 10:55:11 +0200 Subject: ath10k: prevent using invalid ringbuffer indexes If the device is removed and hotplug fails ioread32() will return 0xFFFFFFFF. In that case reading ringbuffer during device bringup led to out-of-bounds addressing of a ringbuffer array that in turn led to a paging failure. This could be reproduced by the following: * boot without acpi/prevent hotplug from working * insert and manually detect (pci rescan) the device * remove the device physically * load ath10k driver * kernel crashed Ringbuffer index reading is now protected by using an appropriate mask to prevent addressing an invalid array index. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index b407929..f8b969f 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -637,6 +637,7 @@ static int ath10k_ce_completed_send_next_nolock(struct ce_state *ce_state, ath10k_pci_wake(ar); src_ring->hw_index = ath10k_ce_src_ring_read_index_get(ar, ctrl_addr); + src_ring->hw_index &= nentries_mask; ath10k_pci_sleep(ar); } read_index = src_ring->hw_index; @@ -950,10 +951,12 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, ath10k_pci_wake(ar); src_ring->sw_index = ath10k_ce_src_ring_read_index_get(ar, ctrl_addr); + src_ring->sw_index &= src_ring->nentries_mask; src_ring->hw_index = src_ring->sw_index; src_ring->write_index = ath10k_ce_src_ring_write_index_get(ar, ctrl_addr); + src_ring->write_index &= src_ring->nentries_mask; ath10k_pci_sleep(ar); src_ring->per_transfer_context = (void **)ptr; @@ -1035,8 +1038,10 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar, ath10k_pci_wake(ar); dest_ring->sw_index = ath10k_ce_dest_ring_read_index_get(ar, ctrl_addr); + dest_ring->sw_index &= dest_ring->nentries_mask; dest_ring->write_index = ath10k_ce_dest_ring_write_index_get(ar, ctrl_addr); + dest_ring->write_index &= dest_ring->nentries_mask; ath10k_pci_sleep(ar); dest_ring->per_transfer_context = (void **)ptr; -- cgit v0.10.2 From dcd4a561215b46d2d7c57b855a7da6a3e6e80c0e Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 31 Jul 2013 10:55:12 +0200 Subject: ath10k: make sure to use passive scan when n_ssids is 0 Normally user specifies broadcast ssid for scanning. If the user wants to do a passive scan it does not pass any ssids. The patch makes sure we ath10k tells firmware to not send anything at all in case it decides no ssids equals broadcast ssid. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 9ea31f8..6b9f850 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2338,6 +2338,8 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw, arg.ssids[i].len = req->ssids[i].ssid_len; arg.ssids[i].ssid = req->ssids[i].ssid; } + } else { + arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; } if (req->n_channels) { -- cgit v0.10.2 From d531cb85d538d4a445e3bb3c669af794ea32e558 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 31 Jul 2013 10:55:13 +0200 Subject: ath10k: advertise more conservative intf combinations Apparently the available firmware has a limit of handling 7 APs, 3 GOs or 8 STAs. This is based on empirical tests and it is still possible some combinations may crash the firmware. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 6b9f850..47c1163 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3114,9 +3114,15 @@ static const struct ieee80211_iface_limit ath10k_if_limits[] = { .max = 8, .types = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_P2P_CLIENT) - | BIT(NL80211_IFTYPE_P2P_GO) - | BIT(NL80211_IFTYPE_AP) - } + }, + { + .max = 3, + .types = BIT(NL80211_IFTYPE_P2P_GO) + }, + { + .max = 7, + .types = BIT(NL80211_IFTYPE_AP) + }, }; static const struct ieee80211_iface_combination ath10k_if_comb = { -- cgit v0.10.2 From 0dbd09e6284dc7c3de1470e2f1a3c83e0a0fc591 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 31 Jul 2013 10:55:14 +0200 Subject: ath10k: zero arvif memory on add_interface() The private memory area in vif provided by mac80211 isn't guaranteed to be zeroed. This patch should fix issues when switching between STA and AP interface types. The tim_bitmap could become polluted by STA bssid field (since it's a union), wep_keys array could also become polluted with invalid pointers and probably much more. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 47c1163..cf2ba4d 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1925,6 +1925,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw, mutex_lock(&ar->conf_mutex); + memset(arvif, 0, sizeof(*arvif)); + arvif->ar = ar; arvif->vif = vif; -- cgit v0.10.2 From 591ecdb8f276925251bb5f5fad7eb064979ecee1 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 31 Jul 2013 10:55:15 +0200 Subject: ath10k: fix failpath in MSI-X setup pci_disable_msi() must be called if the initial request_irq() fails. Also add a warning message so it's possible to distinguish request_irq() failure and pci_enable_msi() failure. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index c71b488..d95439b 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -1990,8 +1990,13 @@ static int ath10k_pci_start_intr_msix(struct ath10k *ar, int num) ret = request_irq(ar_pci->pdev->irq + MSI_ASSIGN_FW, ath10k_pci_msi_fw_handler, IRQF_SHARED, "ath10k_pci", ar); - if (ret) + if (ret) { + ath10k_warn("request_irq(%d) failed %d\n", + ar_pci->pdev->irq + MSI_ASSIGN_FW, ret); + + pci_disable_msi(ar_pci->pdev); return ret; + } for (i = MSI_ASSIGN_CE_INITIAL; i <= MSI_ASSIGN_CE_MAX; i++) { ret = request_irq(ar_pci->pdev->irq + i, -- cgit v0.10.2 From 32270b61b3fcdce3495c7b746576d49f70587150 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 2 Aug 2013 09:15:47 +0200 Subject: ath10k: fix device teardown This fixes interrupt-related issue when no interfaces were running thus the device was considered powered down. The power_down() function isn't really powering down the device. It simply assumed it won't interrupt. This wasn't true in some cases and could lead to paging failures upon FW indication interrupt (i.e. FW crash) because some structures aren't allocated in that device state. One reason for that was that ar_pci->started wasn't reset. The other is interrupts should've been masked when teardown starts. The patch reorganized interrupt setup and makes sure ar_pci->started is reset accordingly. Reported-by: Ben Greear Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index d95439b..503e380 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -56,6 +56,8 @@ static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info); static void ath10k_pci_stop_ce(struct ath10k *ar); static void ath10k_pci_device_reset(struct ath10k *ar); static int ath10k_pci_reset_target(struct ath10k *ar); +static int ath10k_pci_start_intr(struct ath10k *ar); +static void ath10k_pci_stop_intr(struct ath10k *ar); static const struct ce_attr host_ce_config_wlan[] = { /* host->target HTC control and raw streams */ @@ -1254,10 +1256,25 @@ static void ath10k_pci_ce_deinit(struct ath10k *ar) } } +static void ath10k_pci_disable_irqs(struct ath10k *ar) +{ + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); + int i; + + for (i = 0; i < max(1, ar_pci->num_msi_intrs); i++) + disable_irq(ar_pci->pdev->irq + i); +} + static void ath10k_pci_hif_stop(struct ath10k *ar) { + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); + ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); + /* Irqs are never explicitly re-enabled. They are implicitly re-enabled + * by ath10k_pci_start_intr(). */ + ath10k_pci_disable_irqs(ar); + ath10k_pci_stop_ce(ar); /* At this point, asynchronous threads are stopped, the target should @@ -1267,6 +1284,8 @@ static void ath10k_pci_hif_stop(struct ath10k *ar) ath10k_pci_process_ce(ar); ath10k_pci_cleanup_ce(ar); ath10k_pci_buffer_cleanup(ar); + + ar_pci->started = 0; } static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar, @@ -1742,6 +1761,12 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar) { int ret; + ret = ath10k_pci_start_intr(ar); + if (ret) { + ath10k_err("could not start interrupt handling (%d)\n", ret); + goto err; + } + /* * Bring the target up cleanly. * @@ -1756,7 +1781,7 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar) ret = ath10k_pci_reset_target(ar); if (ret) - goto err; + goto err_irq; if (ath10k_target_ps) { ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n"); @@ -1787,12 +1812,15 @@ err_ce: err_ps: if (!ath10k_target_ps) ath10k_do_pci_sleep(ar); +err_irq: + ath10k_pci_stop_intr(ar); err: return ret; } static void ath10k_pci_hif_power_down(struct ath10k *ar) { + ath10k_pci_stop_intr(ar); ath10k_pci_ce_deinit(ar); if (!ath10k_target_ps) ath10k_do_pci_sleep(ar); @@ -2363,22 +2391,14 @@ static int ath10k_pci_probe(struct pci_dev *pdev, ar_pci->cacheline_sz = dma_get_cache_alignment(); - ret = ath10k_pci_start_intr(ar); - if (ret) { - ath10k_err("could not start interrupt handling (%d)\n", ret); - goto err_iomap; - } - ret = ath10k_core_register(ar); if (ret) { ath10k_err("could not register driver core (%d)\n", ret); - goto err_intr; + goto err_iomap; } return 0; -err_intr: - ath10k_pci_stop_intr(ar); err_iomap: pci_iounmap(pdev, mem); err_master: @@ -2415,7 +2435,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev) tasklet_kill(&ar_pci->msi_fw_err); ath10k_core_unregister(ar); - ath10k_pci_stop_intr(ar); pci_set_drvdata(pdev, NULL); pci_iounmap(pdev, ar_pci->mem); -- cgit v0.10.2 From e7f1935c11269bc53cd52425b1025657adddb839 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 25 Jul 2013 21:45:17 +0200 Subject: wireless: make TU conversion macros available A few places in the code (mac80211 and iwlmvm) use the same TU_TO_JIFFIES() macro and could use TU_TO_EXP_TIME() that mac80211 has. Make these available to everyone and use them. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index ad9bbca..9f10036 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -73,7 +73,6 @@ #include "iwl-prph.h" /* A TimeUnit is 1024 microsecond */ -#define TU_TO_JIFFIES(_tu) (usecs_to_jiffies((_tu) * 1024)) #define MSEC_TO_TU(_msec) (_msec*1000/1024) /* @@ -191,8 +190,7 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, iwl_mvm_te_clear_data(mvm, te_data); } else if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_START) { te_data->running = true; - te_data->end_jiffies = jiffies + - TU_TO_JIFFIES(te_data->duration); + te_data->end_jiffies = TU_TO_EXP_TIME(te_data->duration); if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE) { set_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status); @@ -329,8 +327,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, lockdep_assert_held(&mvm->mutex); if (te_data->running && - time_after(te_data->end_jiffies, - jiffies + TU_TO_JIFFIES(min_duration))) { + time_after(te_data->end_jiffies, TU_TO_EXP_TIME(min_duration))) { IWL_DEBUG_TE(mvm, "We have enough time in the current TE: %u\n", jiffies_to_msecs(te_data->end_jiffies - jiffies)); return; diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index b3ce299..23a8877 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2288,4 +2288,8 @@ static inline bool ieee80211_check_tim(const struct ieee80211_tim_ie *tim, return !!(tim->virtual_map[index] & mask); } +/* convert time units */ +#define TU_TO_JIFFIES(x) (usecs_to_jiffies((x) * 1024)) +#define TU_TO_EXP_TIME(x) (jiffies + TU_TO_JIFFIES(x)) + #endif /* LINUX_IEEE80211_H */ diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e94c840..b618651 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -53,9 +53,6 @@ struct ieee80211_local; * increased memory use (about 2 kB of RAM per entry). */ #define IEEE80211_FRAGMENT_MAX 4 -#define TU_TO_JIFFIES(x) (usecs_to_jiffies((x) * 1024)) -#define TU_TO_EXP_TIME(x) (jiffies + TU_TO_JIFFIES(x)) - /* power level hasn't been configured (or set to automatic) */ #define IEEE80211_UNSET_POWER_LEVEL INT_MIN -- cgit v0.10.2 From 8cc8df906f953ae0cfe785720989928021d7fe2d Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Fri, 2 Aug 2013 09:58:49 +0200 Subject: ath10k: add SoC power save option to PCI features map Unify the PCI options location. By default the SoC PS option is disabled to boost the performance and due to poor stability on early HW revisions. In future we can remove the module parameter and turn on/off the PS for given hardware. This change also makes the pci module parameter for SoC PS static. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 503e380..e2f9ef5 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -32,7 +32,7 @@ #include "ce.h" #include "pci.h" -unsigned int ath10k_target_ps; +static unsigned int ath10k_target_ps; module_param(ath10k_target_ps, uint, 0644); MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option"); @@ -1759,6 +1759,7 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar) static int ath10k_pci_hif_power_up(struct ath10k *ar) { + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); int ret; ret = ath10k_pci_start_intr(ar); @@ -1783,13 +1784,9 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar) if (ret) goto err_irq; - if (ath10k_target_ps) { - ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n"); - } else { + if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) /* Force AWAKE forever */ - ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n"); ath10k_do_pci_wake(ar); - } ret = ath10k_pci_ce_init(ar); if (ret) @@ -1810,7 +1807,7 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar) err_ce: ath10k_pci_ce_deinit(ar); err_ps: - if (!ath10k_target_ps) + if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) ath10k_do_pci_sleep(ar); err_irq: ath10k_pci_stop_intr(ar); @@ -1820,9 +1817,12 @@ err: static void ath10k_pci_hif_power_down(struct ath10k *ar) { + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); + ath10k_pci_stop_intr(ar); + ath10k_pci_ce_deinit(ar); - if (!ath10k_target_ps) + if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) ath10k_do_pci_sleep(ar); } @@ -2272,6 +2272,9 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci) case ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND: ath10k_dbg(ATH10K_DBG_PCI, "QCA988X_1.0 workaround enabled\n"); break; + case ATH10K_PCI_FEATURE_SOC_POWER_SAVE: + ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n"); + break; } } } @@ -2307,6 +2310,9 @@ static int ath10k_pci_probe(struct pci_dev *pdev, goto err_ar_pci; } + if (ath10k_target_ps) + set_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features); + ath10k_pci_dump_features(ar_pci); ar = ath10k_core_create(ar_pci, ar_pci->dev, &ath10k_pci_hif_ops); diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index d3a2e6c..871bb33 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -153,6 +153,7 @@ struct service_to_pipe { enum ath10k_pci_features { ATH10K_PCI_FEATURE_MSI_X = 0, ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND = 1, + ATH10K_PCI_FEATURE_SOC_POWER_SAVE = 2, /* keep last */ ATH10K_PCI_FEATURE_COUNT @@ -335,20 +336,22 @@ static inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset) return ioread32(ar_pci->mem + offset); } -extern unsigned int ath10k_target_ps; - void ath10k_do_pci_wake(struct ath10k *ar); void ath10k_do_pci_sleep(struct ath10k *ar); static inline void ath10k_pci_wake(struct ath10k *ar) { - if (ath10k_target_ps) + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); + + if (test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) ath10k_do_pci_wake(ar); } static inline void ath10k_pci_sleep(struct ath10k *ar) { - if (ath10k_target_ps) + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); + + if (test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) ath10k_do_pci_sleep(ar); } -- cgit v0.10.2 From f32036e823c45cb4974aab1d0ae66d716bfc9aa6 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Thu, 20 Jun 2013 12:47:20 +0530 Subject: ath6kl: Fix race in heart beat polling Make sure to cancel heart beat timer before freeing wmi to avoid potential NULL pointer dereference. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index 6a67881..4f316bd 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -1836,6 +1836,9 @@ void ath6kl_stop_txrx(struct ath6kl *ar) clear_bit(WMI_READY, &ar->flag); + if (ar->fw_recovery.enable) + del_timer_sync(&ar->fw_recovery.hb_timer); + /* * After wmi_shudown all WMI events will be dropped. We * need to cleanup the buffers allocated in AP mode and -- cgit v0.10.2 From 9d0e2f0772d394060bf3b17cd1f3a35574365103 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Mon, 5 Aug 2013 10:19:22 +0530 Subject: ath6kl: Fix invalid pointer access on fuzz testing with AP mode In our Fuz testing, reference client corrupts the dest mac to "00:00:00:00:00:00" in the WPA2 handshake no 2. During driver init the sta_list entries mac addresses are by default "00:00:00:00:00:00". Driver returns an invalid pointer (conn) and the drver shall crash, if rxtids (aggr_conn) skb queues are accessed, since they would not be initialized. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c index d4fcfca..5839fc2 100644 --- a/drivers/net/wireless/ath/ath6kl/main.c +++ b/drivers/net/wireless/ath/ath6kl/main.c @@ -29,6 +29,9 @@ struct ath6kl_sta *ath6kl_find_sta(struct ath6kl_vif *vif, u8 *node_addr) struct ath6kl_sta *conn = NULL; u8 i, max_conn; + if (is_zero_ether_addr(node_addr)) + return NULL; + max_conn = (vif->nw_type == AP_NETWORK) ? AP_MAX_NUM_STA : 0; for (i = 0; i < max_conn; i++) { -- cgit v0.10.2 From 495191c79f378462cc85d1e669be3f8b9ef1c8e7 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Mon, 5 Aug 2013 14:16:45 +0300 Subject: iwlwifi: mvm: Fix beacon filtering enablement via debugfs The code was only enabling it when already enabled, which obviously can't work. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c index 2ee256d..3cdc005 100644 --- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c @@ -895,10 +895,7 @@ static ssize_t iwl_dbgfs_bf_params_write(struct file *file, if (param == MVM_DEBUGFS_BF_ENABLE_BEACON_FILTER && !value) { ret = iwl_mvm_disable_beacon_filter(mvm, vif); } else { - if (mvmvif->bf_enabled) - ret = iwl_mvm_enable_beacon_filter(mvm, vif); - else - ret = iwl_mvm_disable_beacon_filter(mvm, vif); + ret = iwl_mvm_enable_beacon_filter(mvm, vif); } mutex_unlock(&mvm->mutex); -- cgit v0.10.2 From f4f3c659846587aae9043d2df31f6434934965e1 Mon Sep 17 00:00:00 2001 From: Matti Gottlieb Date: Tue, 6 Aug 2013 18:17:42 +0300 Subject: iwlwifi: introduce external debug level This debug level will be used in the future for logging interaction with external modules. Signed-off-by: Matti Gottlieb Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index 7edb851..b2bb32a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -145,6 +145,7 @@ do { \ #define IWL_DL_RX 0x01000000 #define IWL_DL_ISR 0x02000000 #define IWL_DL_HT 0x04000000 +#define IWL_DL_EXTERNAL 0x08000000 /* 0xF0000000 - 0x10000000 */ #define IWL_DL_11H 0x10000000 #define IWL_DL_STATS 0x20000000 @@ -153,6 +154,7 @@ do { \ #define IWL_DEBUG_INFO(p, f, a...) IWL_DEBUG(p, IWL_DL_INFO, f, ## a) #define IWL_DEBUG_MAC80211(p, f, a...) IWL_DEBUG(p, IWL_DL_MAC80211, f, ## a) +#define IWL_DEBUG_EXTERNAL(p, f, a...) IWL_DEBUG(p, IWL_DL_EXTERNAL, f, ## a) #define IWL_DEBUG_TEMP(p, f, a...) IWL_DEBUG(p, IWL_DL_TEMP, f, ## a) #define IWL_DEBUG_SCAN(p, f, a...) IWL_DEBUG(p, IWL_DL_SCAN, f, ## a) #define IWL_DEBUG_RX(p, f, a...) IWL_DEBUG(p, IWL_DL_RX, f, ## a) -- cgit v0.10.2 From a9b292464311d32441cd3284109263d92c413a48 Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Mon, 15 Jul 2013 11:51:48 -0400 Subject: iwlwifi: pcie: Refactor iwl_queue_space Reduce the ambiguity spares to a single element if the window size is not smaller than the queue size. If smaller, no spares are required at all. Signed-off-by: Ido Yariv Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 011167c..12c9c00 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -65,18 +65,30 @@ ***************************************************/ static int iwl_queue_space(const struct iwl_queue *q) { - int s = q->read_ptr - q->write_ptr; - - if (q->read_ptr > q->write_ptr) - s -= q->n_bd; - - if (s <= 0) - s += q->n_window; - /* keep some reserve to not confuse empty and full situations */ - s -= 2; - if (s < 0) - s = 0; - return s; + unsigned int max; + unsigned int used; + + /* + * To avoid ambiguity between empty and completely full queues, there + * should always be less than q->n_bd elements in the queue. + * If q->n_window is smaller than q->n_bd, there is no need to reserve + * any queue entries for this purpose. + */ + if (q->n_window < q->n_bd) + max = q->n_window; + else + max = q->n_bd - 1; + + /* + * q->n_bd is a power of 2, so the following is equivalent to modulo by + * q->n_bd and is well defined for negative dividends. + */ + used = (q->write_ptr - q->read_ptr) & (q->n_bd - 1); + + if (WARN_ON(used > max)) + return 0; + + return max - used; } /* -- cgit v0.10.2 From 351746c9ad790260ffe5cc78f41e2a8a1e6ab8b6 Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Mon, 15 Jul 2013 12:41:27 -0400 Subject: iwlwifi: pcie: Refactor iwl_rxq_space Simplify iwl_rxq_space to improve readability and reduce the ambiguity spares to a single element. Signed-off-by: Ido Yariv Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 5fdb4ee..8c9641b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -112,15 +112,16 @@ */ static int iwl_rxq_space(const struct iwl_rxq *rxq) { - int s = rxq->read - rxq->write; - - if (s <= 0) - s += RX_QUEUE_SIZE; - /* keep some buffer to not confuse full and empty queue */ - s -= 2; - if (s < 0) - s = 0; - return s; + /* Make sure RX_QUEUE_SIZE is a power of 2 */ + BUILD_BUG_ON(RX_QUEUE_SIZE & (RX_QUEUE_SIZE - 1)); + + /* + * There can be up to (RX_QUEUE_SIZE - 1) free slots, to avoid ambiguity + * between empty and completely full queues. + * The following is equivalent to modulo by RX_QUEUE_SIZE and is well + * defined for negative dividends. + */ + return (rxq->read - rxq->write - 1) & (RX_QUEUE_SIZE - 1); } /* -- cgit v0.10.2 From 6e8773c31497867b0dbbcaa60391ab3ec9156371 Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Mon, 15 Jul 2013 16:01:48 -0400 Subject: iwlwifi: pcie: Remove duplicate code from pcie irq handlers Instead of having the same code sequentially, fall-through. Signed-off-by: Ido Yariv Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 8c9641b..3f237b4 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -1121,6 +1121,7 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data) struct iwl_trans *trans = data; struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); u32 inta, inta_mask; + irqreturn_t ret = IRQ_NONE; lockdep_assert_held(&trans_pcie->irq_lock); @@ -1169,10 +1170,8 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data) /* the thread will service interrupts and re-enable them */ if (likely(inta)) return IRQ_WAKE_THREAD; - else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - return IRQ_HANDLED; + + ret = IRQ_HANDLED; none: /* re-enable interrupts here since we don't have anything to service. */ @@ -1181,7 +1180,7 @@ none: !trans_pcie->inta) iwl_enable_interrupts(trans); - return IRQ_NONE; + return ret; } /* interrupt handler using ict table, with this interrupt driver will @@ -1200,6 +1199,7 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data) u32 val = 0; u32 read; unsigned long flags; + irqreturn_t ret = IRQ_NONE; if (!trans) return IRQ_NONE; @@ -1212,7 +1212,7 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data) * use legacy interrupt. */ if (unlikely(!trans_pcie->use_ict)) { - irqreturn_t ret = iwl_pcie_isr(irq, data); + ret = iwl_pcie_isr(irq, data); spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); return ret; } @@ -1281,17 +1281,9 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data) if (likely(inta)) { spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); return IRQ_WAKE_THREAD; - } else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) { - /* Allow interrupt if was disabled by this handler and - * no tasklet was schedules, We should not enable interrupt, - * tasklet will enable it. - */ - iwl_enable_interrupts(trans); } - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_HANDLED; + ret = IRQ_HANDLED; none: /* re-enable interrupts here since we don't have anything to service. @@ -1302,5 +1294,5 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data) iwl_enable_interrupts(trans); spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_NONE; + return ret; } -- cgit v0.10.2 From 0670307992a69a2028e01e6a5fb5f4ab23167954 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Tue, 6 Aug 2013 15:39:56 -0700 Subject: mac80211: allow lowest basic rate for unicast management for mesh Allow lowest basic rate to be used for unicast management frame in mesh. Otherwise, the lowest supported rate is used for unicast management frame, such as 1Mbps for 2.4GHz and 6Mbps for 5GHz. Rename the rc_send_low_broadcast to re_send_low_basicrate since now it is also applied to unicast management frame in mesh. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index ba63ac8..e126605 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -210,7 +210,7 @@ static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc) !ieee80211_is_data(fc); } -static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, +static void rc_send_low_basicrate(s8 *idx, u32 basic_rates, struct ieee80211_supported_band *sband) { u8 i; @@ -263,28 +263,37 @@ static void __rate_control_send_low(struct ieee80211_hw *hw, } -bool rate_control_send_low(struct ieee80211_sta *sta, +bool rate_control_send_low(struct ieee80211_sta *pubsta, void *priv_sta, struct ieee80211_tx_rate_control *txrc) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); struct ieee80211_supported_band *sband = txrc->sband; + struct sta_info *sta; int mcast_rate; + bool use_basicrate = false; - if (!sta || !priv_sta || rc_no_data_or_no_ack_use_min(txrc)) { - __rate_control_send_low(txrc->hw, sband, sta, info); + if (!pubsta || !priv_sta || rc_no_data_or_no_ack_use_min(txrc)) { + __rate_control_send_low(txrc->hw, sband, pubsta, info); - if (!sta && txrc->bss) { + if (!pubsta && txrc->bss) { mcast_rate = txrc->bss_conf->mcast_rate[sband->band]; if (mcast_rate > 0) { info->control.rates[0].idx = mcast_rate - 1; return true; } + use_basicrate = true; + } else if (pubsta) { + sta = container_of(pubsta, struct sta_info, sta); + if (ieee80211_vif_is_mesh(&sta->sdata->vif)) + use_basicrate = true; + } - rc_send_low_broadcast(&info->control.rates[0].idx, + if (use_basicrate) + rc_send_low_basicrate(&info->control.rates[0].idx, txrc->bss_conf->basic_rates, sband); - } + return true; } return false; -- cgit v0.10.2 From ab1e8ad3b463fd15b99a9b3980ec0f84294f6207 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 2 Aug 2013 17:38:01 +0200 Subject: mac80211: fix ieee80211_sta_process_chanswitch for 5/10 MHz channels Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 211246b..45a87ee 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1102,6 +1102,15 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, case -1: cfg80211_chandef_create(&new_chandef, new_chan, NL80211_CHAN_NO_HT); + /* keep width for 5/10 MHz channels */ + switch (sdata->vif.bss_conf.chandef.width) { + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + new_chandef.width = sdata->vif.bss_conf.chandef.width; + break; + default: + break; + } break; } -- cgit v0.10.2 From 1da5fcc86d71040c5b294ca5611ae6c86bfa815c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 6 Aug 2013 14:10:48 +0200 Subject: nl80211: clean up CQM settings code Clean up the CQM settings code a bit and while at it enforce that when setting the threshold to 0 (disable) the hysteresis is also set to 0 to avoid confusion. As we haven't enforce it, simply override userspace. Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f7cb121..c2a40a2 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -7562,14 +7562,12 @@ static int nl80211_set_cqm_txe(struct genl_info *info, u32 rate, u32 pkts, u32 intvl) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; - struct wireless_dev *wdev; struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; if (rate > 100 || intvl > NL80211_CQM_TXE_MAX_INTVL) return -EINVAL; - wdev = dev->ieee80211_ptr; - if (!rdev->ops->set_cqm_txe_config) return -EOPNOTSUPP; @@ -7584,13 +7582,15 @@ static int nl80211_set_cqm_rssi(struct genl_info *info, s32 threshold, u32 hysteresis) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; - struct wireless_dev *wdev; struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; if (threshold > 0) return -EINVAL; - wdev = dev->ieee80211_ptr; + /* disabling - hysteresis should also be zero then */ + if (threshold == 0) + hysteresis = 0; if (!rdev->ops->set_cqm_rssi_config) return -EOPNOTSUPP; @@ -7609,36 +7609,33 @@ static int nl80211_set_cqm(struct sk_buff *skb, struct genl_info *info) int err; cqm = info->attrs[NL80211_ATTR_CQM]; - if (!cqm) { - err = -EINVAL; - goto out; - } + if (!cqm) + return -EINVAL; err = nla_parse_nested(attrs, NL80211_ATTR_CQM_MAX, cqm, nl80211_attr_cqm_policy); if (err) - goto out; + return err; if (attrs[NL80211_ATTR_CQM_RSSI_THOLD] && attrs[NL80211_ATTR_CQM_RSSI_HYST]) { - s32 threshold; - u32 hysteresis; - threshold = nla_get_u32(attrs[NL80211_ATTR_CQM_RSSI_THOLD]); - hysteresis = nla_get_u32(attrs[NL80211_ATTR_CQM_RSSI_HYST]); - err = nl80211_set_cqm_rssi(info, threshold, hysteresis); - } else if (attrs[NL80211_ATTR_CQM_TXE_RATE] && - attrs[NL80211_ATTR_CQM_TXE_PKTS] && - attrs[NL80211_ATTR_CQM_TXE_INTVL]) { - u32 rate, pkts, intvl; - rate = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_RATE]); - pkts = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_PKTS]); - intvl = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_INTVL]); - err = nl80211_set_cqm_txe(info, rate, pkts, intvl); - } else - err = -EINVAL; + s32 threshold = nla_get_s32(attrs[NL80211_ATTR_CQM_RSSI_THOLD]); + u32 hysteresis = nla_get_u32(attrs[NL80211_ATTR_CQM_RSSI_HYST]); -out: - return err; + return nl80211_set_cqm_rssi(info, threshold, hysteresis); + } + + if (attrs[NL80211_ATTR_CQM_TXE_RATE] && + attrs[NL80211_ATTR_CQM_TXE_PKTS] && + attrs[NL80211_ATTR_CQM_TXE_INTVL]) { + u32 rate = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_RATE]); + u32 pkts = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_PKTS]); + u32 intvl = nla_get_u32(attrs[NL80211_ATTR_CQM_TXE_INTVL]); + + return nl80211_set_cqm_txe(info, rate, pkts, intvl); + } + + return -EINVAL; } static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) -- cgit v0.10.2 From af61a165187bb94b1dc7628ef815c23d0eacf40b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jul 2013 18:09:12 +0200 Subject: mac80211: add control port protocol TX control flag A lot of drivers check the frame protocol for ETH_P_PAE, for various reasons (like making those more reliable). Add a new flags bitmap to the TX control info and a new flag indicating the control port protocol is in use to let all drivers also apply such logic to other control port protocols, should they be configured. Also use the new flag in the iwlwifi drivers. Signed-off-by: Johannes Berg diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index 49267ea..f403ec3 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -325,6 +325,7 @@ functions/definitions !Finclude/net/mac80211.h ieee80211_rx_status !Finclude/net/mac80211.h mac80211_rx_flags +!Finclude/net/mac80211.h mac80211_tx_info_flags !Finclude/net/mac80211.h mac80211_tx_control_flags !Finclude/net/mac80211.h mac80211_rate_control_flags !Finclude/net/mac80211.h ieee80211_tx_rate diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 5ee983f..f364583 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -87,7 +87,7 @@ static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv, priv->lib->bt_params->advanced_bt_coexist && (ieee80211_is_auth(fc) || ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc) || - skb->protocol == cpu_to_be16(ETH_P_PAE))) + info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) tx_flags |= TX_CMD_FLG_IGNORE_BT; diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h index 4491c1c..684c416 100644 --- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h +++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h @@ -33,10 +33,11 @@ static inline bool iwl_trace_data(struct sk_buff *skb) { struct ieee80211_hdr *hdr = (void *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - if (ieee80211_is_data(hdr->frame_control)) - return skb->protocol != cpu_to_be16(ETH_P_PAE); - return false; + if (!ieee80211_is_data(hdr->frame_control)) + return false; + return !(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO); } static inline size_t iwl_rx_trace_len(const struct iwl_trans *trans, diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index f0e96a9..d62a6d3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -91,11 +91,10 @@ static void iwl_mvm_set_tx_cmd(struct iwl_mvm *mvm, struct sk_buff *skb, tx_flags |= TX_CMD_FLG_ACK | TX_CMD_FLG_BAR; /* High prio packet (wrt. BT coex) if it is EAPOL, MCAST or MGMT */ - if (info->band == IEEE80211_BAND_2GHZ && - (skb->protocol == cpu_to_be16(ETH_P_PAE) || - is_multicast_ether_addr(hdr->addr1) || - ieee80211_is_back_req(fc) || - ieee80211_is_mgmt(fc))) + if (info->band == IEEE80211_BAND_2GHZ && + (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO || + is_multicast_ether_addr(hdr->addr1) || + ieee80211_is_back_req(fc) || ieee80211_is_mgmt(fc))) tx_flags |= TX_CMD_FLG_BT_DIS; if (ieee80211_has_morefrags(fc)) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9cda372..b70c001 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -375,7 +375,7 @@ struct ieee80211_bss_conf { }; /** - * enum mac80211_tx_control_flags - flags to describe transmission information/status + * enum mac80211_tx_info_flags - flags to describe transmission information/status * * These flags are used with the @flags member of &ieee80211_tx_info. * @@ -471,7 +471,7 @@ struct ieee80211_bss_conf { * Note: If you have to add new flags to the enumeration, then don't * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary. */ -enum mac80211_tx_control_flags { +enum mac80211_tx_info_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1), IEEE80211_TX_CTL_NO_ACK = BIT(2), @@ -507,6 +507,18 @@ enum mac80211_tx_control_flags { #define IEEE80211_TX_CTL_STBC_SHIFT 23 +/** + * enum mac80211_tx_control_flags - flags to describe transmit control + * + * @IEEE80211_TX_CTRL_PORT_CTRL_PROTO: this frame is a port control + * protocol frame (e.g. EAP) + * + * These flags are used in tx_info->control.flags. + */ +enum mac80211_tx_control_flags { + IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0), +}; + /* * This definition is used as a mask to clear all temporary flags, which are * set by the tx handlers for each transmission attempt by the mac80211 stack. @@ -680,7 +692,8 @@ struct ieee80211_tx_info { /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; - /* 8 bytes free */ + u32 flags; + /* 4 bytes free */ } control; struct { struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 7475a7a..9eff382 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -439,12 +439,13 @@ minstrel_aggr_check(struct ieee80211_sta *pubsta, struct sk_buff *skb) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct sta_info *sta = container_of(pubsta, struct sta_info, sta); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); u16 tid; if (unlikely(!ieee80211_is_data_qos(hdr->frame_control))) return; - if (unlikely(skb->protocol == cpu_to_be16(ETH_P_PAE))) + if (unlikely(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) return; tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK; @@ -776,7 +777,7 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, /* Don't use EAPOL frames for sampling on non-mrr hw */ if (mp->hw->max_rates == 1 && - txrc->skb->protocol == cpu_to_be16(ETH_P_PAE)) + (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) sample_idx = -1; else sample_idx = minstrel_get_sample_rate(mp, mi); diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 0e42322..098ae85 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -539,9 +539,11 @@ ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data *tx) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); - if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol && - tx->sdata->control_port_no_encrypt)) - info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol)) { + if (tx->sdata->control_port_no_encrypt) + info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + info->control.flags |= IEEE80211_TX_CTRL_PORT_CTRL_PROTO; + } return TX_CONTINUE; } -- cgit v0.10.2 From fc73f11f5fa230f8c687d51b0fddb00433092ce0 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Wed, 31 Jul 2013 18:04:15 +0300 Subject: cfg80211: add wdev to testmode cmd To allow drivers to implement per-interface testmode operations more easily, pass a wdev pointer if any identification for one was given from userspace. Clean up the code a bit while at it. Signed-off-by: David Spinadel Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath6kl/testmode.c b/drivers/net/wireless/ath/ath6kl/testmode.c index acc9aa8..d67170e 100644 --- a/drivers/net/wireless/ath/ath6kl/testmode.c +++ b/drivers/net/wireless/ath/ath6kl/testmode.c @@ -66,7 +66,8 @@ nla_put_failure: ath6kl_warn("nla_put failed on testmode rx skb!\n"); } -int ath6kl_tm_cmd(struct wiphy *wiphy, void *data, int len) +int ath6kl_tm_cmd(struct wiphy *wiphy, struct wireless_dev *wdev, + void *data, int len) { struct ath6kl *ar = wiphy_priv(wiphy); struct nlattr *tb[ATH6KL_TM_ATTR_MAX + 1]; diff --git a/drivers/net/wireless/ath/ath6kl/testmode.h b/drivers/net/wireless/ath/ath6kl/testmode.h index fe651d6..9fbcdec3 100644 --- a/drivers/net/wireless/ath/ath6kl/testmode.h +++ b/drivers/net/wireless/ath/ath6kl/testmode.h @@ -20,7 +20,8 @@ #ifdef CONFIG_NL80211_TESTMODE void ath6kl_tm_rx_event(struct ath6kl *ar, void *buf, size_t buf_len); -int ath6kl_tm_cmd(struct wiphy *wiphy, void *data, int len); +int ath6kl_tm_cmd(struct wiphy *wiphy, struct wireless_dev *wdev, + void *data, int len); #else @@ -29,7 +30,9 @@ static inline void ath6kl_tm_rx_event(struct ath6kl *ar, void *buf, { } -static inline int ath6kl_tm_cmd(struct wiphy *wiphy, void *data, int len) +static inline int ath6kl_tm_cmd(struct wiphy *wiphy, + struct wireless_dev *wdev, + void *data, int len) { return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 277b37a..b7d8850 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3152,7 +3152,9 @@ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy, } #ifdef CONFIG_NL80211_TESTMODE -static int brcmf_cfg80211_testmode(struct wiphy *wiphy, void *data, int len) +static int brcmf_cfg80211_testmode(struct wiphy *wiphy, + struct wireless_dev *wdev, + void *data, int len) { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct net_device *ndev = cfg_to_ndev(cfg); diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index b7495c7..9ab7a06 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2081,7 +2081,7 @@ struct cfg80211_update_ft_ies_params { * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management * frame on another channel * - * @testmode_cmd: run a test mode command + * @testmode_cmd: run a test mode command; @wdev may be %NULL * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be * used by the function, but 0 and 1 must not be touched. Additionally, * return error codes other than -ENOBUFS and -ENOENT will terminate the @@ -2290,7 +2290,8 @@ struct cfg80211_ops { void (*rfkill_poll)(struct wiphy *wiphy); #ifdef CONFIG_NL80211_TESTMODE - int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len); + int (*testmode_cmd)(struct wiphy *wiphy, struct wireless_dev *wdev, + void *data, int len); int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb, struct netlink_callback *cb, void *data, int len); diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 44449ce..c77916f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2300,7 +2300,9 @@ static void ieee80211_rfkill_poll(struct wiphy *wiphy) } #ifdef CONFIG_NL80211_TESTMODE -static int ieee80211_testmode_cmd(struct wiphy *wiphy, void *data, int len) +static int ieee80211_testmode_cmd(struct wiphy *wiphy, + struct wireless_dev *wdev, + void *data, int len) { struct ieee80211_local *local = wiphy_priv(wiphy); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c2a40a2..334697d 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6591,19 +6591,30 @@ static struct genl_multicast_group nl80211_testmode_mcgrp = { static int nl80211_testmode_do(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct wireless_dev *wdev = + __cfg80211_wdev_from_attrs(genl_info_net(info), info->attrs); int err; + if (!rdev->ops->testmode_cmd) + return -EOPNOTSUPP; + + if (IS_ERR(wdev)) { + err = PTR_ERR(wdev); + if (err != -EINVAL) + return err; + wdev = NULL; + } else if (wdev->wiphy != &rdev->wiphy) { + return -EINVAL; + } + if (!info->attrs[NL80211_ATTR_TESTDATA]) return -EINVAL; - err = -EOPNOTSUPP; - if (rdev->ops->testmode_cmd) { - rdev->testmode_info = info; - err = rdev_testmode_cmd(rdev, + rdev->testmode_info = info; + err = rdev_testmode_cmd(rdev, wdev, nla_data(info->attrs[NL80211_ATTR_TESTDATA]), nla_len(info->attrs[NL80211_ATTR_TESTDATA])); - rdev->testmode_info = NULL; - } + rdev->testmode_info = NULL; return err; } diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index de870d4..37ce9fd 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -516,11 +516,12 @@ static inline void rdev_rfkill_poll(struct cfg80211_registered_device *rdev) #ifdef CONFIG_NL80211_TESTMODE static inline int rdev_testmode_cmd(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev, void *data, int len) { int ret; - trace_rdev_testmode_cmd(&rdev->wiphy); - ret = rdev->ops->testmode_cmd(&rdev->wiphy, data, len); + trace_rdev_testmode_cmd(&rdev->wiphy, wdev); + ret = rdev->ops->testmode_cmd(&rdev->wiphy, wdev, data, len); trace_rdev_return_int(&rdev->wiphy, ret); return ret; } diff --git a/net/wireless/trace.h b/net/wireless/trace.h index f0ebdcd..ba5f0d6 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1293,15 +1293,17 @@ TRACE_EVENT(rdev_return_int_int, #ifdef CONFIG_NL80211_TESTMODE TRACE_EVENT(rdev_testmode_cmd, - TP_PROTO(struct wiphy *wiphy), - TP_ARGS(wiphy), + TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev), + TP_ARGS(wiphy, wdev), TP_STRUCT__entry( WIPHY_ENTRY + WDEV_ENTRY ), TP_fast_assign( WIPHY_ASSIGN; + WDEV_ASSIGN; ), - TP_printk(WIPHY_PR_FMT, WIPHY_PR_ARG) + TP_printk(WIPHY_PR_FMT WDEV_PR_FMT, WIPHY_PR_ARG, WDEV_PR_ARG) ); TRACE_EVENT(rdev_testmode_dump, -- cgit v0.10.2 From 52981cd79461e47fe683febfcbd3d380c72b1c6c Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Wed, 31 Jul 2013 18:06:22 +0300 Subject: mac80211: add vif to testmode cmd Pass the wdev from cfg80211 on to the driver as the vif if given and it's valid for the driver. Signed-off-by: David Spinadel Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 7b2a622..a0d2aac 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1364,6 +1364,7 @@ static const struct nla_policy hwsim_testmode_policy[HWSIM_TM_ATTR_MAX + 1] = { static int hwsim_fops_ps_write(void *dat, u64 val); static int mac80211_hwsim_testmode_cmd(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, void *data, int len) { struct mac80211_hwsim_data *hwsim = hw->priv; diff --git a/drivers/net/wireless/ti/wlcore/testmode.c b/drivers/net/wireless/ti/wlcore/testmode.c index f344276..527590f 100644 --- a/drivers/net/wireless/ti/wlcore/testmode.c +++ b/drivers/net/wireless/ti/wlcore/testmode.c @@ -356,7 +356,8 @@ out: return ret; } -int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len) +int wl1271_tm_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + void *data, int len) { struct wl1271 *wl = hw->priv; struct nlattr *tb[WL1271_TM_ATTR_MAX + 1]; diff --git a/drivers/net/wireless/ti/wlcore/testmode.h b/drivers/net/wireless/ti/wlcore/testmode.h index 8071654..61d8434 100644 --- a/drivers/net/wireless/ti/wlcore/testmode.h +++ b/drivers/net/wireless/ti/wlcore/testmode.h @@ -26,6 +26,7 @@ #include -int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len); +int wl1271_tm_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + void *data, int len); #endif /* __WL1271_TESTMODE_H__ */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b70c001..df93c77 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2516,8 +2516,8 @@ enum ieee80211_roc_type { * in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout * accordingly. This callback is not required and may sleep. * - * @testmode_cmd: Implement a cfg80211 test mode command. - * The callback can sleep. + * @testmode_cmd: Implement a cfg80211 test mode command. The passed @vif may + * be %NULL. The callback can sleep. * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep. * * @flush: Flush all pending frames from the hardware queue, making sure @@ -2778,7 +2778,8 @@ struct ieee80211_ops { void (*rfkill_poll)(struct ieee80211_hw *hw); void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class); #ifdef CONFIG_NL80211_TESTMODE - int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len); + int (*testmode_cmd)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + void *data, int len); int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb, struct netlink_callback *cb, void *data, int len); diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index c77916f..7aa38ce 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2305,11 +2305,20 @@ static int ieee80211_testmode_cmd(struct wiphy *wiphy, void *data, int len) { struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_vif *vif = NULL; if (!local->ops->testmode_cmd) return -EOPNOTSUPP; - return local->ops->testmode_cmd(&local->hw, data, len); + if (wdev) { + struct ieee80211_sub_if_data *sdata; + + sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); + if (sdata->flags & IEEE80211_SDATA_IN_DRIVER) + vif = &sdata->vif; + } + + return local->ops->testmode_cmd(&local->hw, vif, data, len); } static int ieee80211_testmode_dump(struct wiphy *wiphy, -- cgit v0.10.2 From f8f03c3edc39f179457a4a5c6095f45a8300db9b Mon Sep 17 00:00:00 2001 From: Eytan Lifshitz Date: Wed, 7 Aug 2013 19:36:42 +0300 Subject: iwlwifi: mvm: add support to the new FW time event API The time event firmware API will change, add the support for that. Use the new API throughout and convert to the old where needed. Signed-off-by: Eytan Lifshitz Reviewed-by: Guy Cohen Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index bd335f0..1705d24 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -76,6 +76,7 @@ * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS * @IWL_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD * @IWL_UCODE_TLV_FLAGS_RX_ENERGY_API: supports rx signal strength api + * @IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2: using the new time event API. * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six * (rather than two) IPv6 addresses * @IWL_UCODE_TLV_FLAGS_BF_UPDATED: new beacon filtering API @@ -88,6 +89,7 @@ enum iwl_ucode_tlv_flag { IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4), IWL_UCODE_TLV_FLAGS_UAPSD = BIT(6), IWL_UCODE_TLV_FLAGS_RX_ENERGY_API = BIT(8), + IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 = BIT(9), IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), IWL_UCODE_TLV_FLAGS_BF_UPDATED = BIT(11), }; diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 55854a3..b104710 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -499,71 +499,199 @@ enum iwl_time_event_type { TE_MAX }; /* MAC_EVENT_TYPE_API_E_VER_1 */ + + +/* Time event - defines for command API v1 */ + +/* + * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed. + * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only + * the first fragment is scheduled. + * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only + * the first 2 fragments are scheduled. + * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any + * number of fragments are valid. + * + * Other than the constant defined above, specifying a fragmentation value 'x' + * means that the event can be fragmented but only the first 'x' will be + * scheduled. + */ +enum { + TE_V1_FRAG_NONE = 0, + TE_V1_FRAG_SINGLE = 1, + TE_V1_FRAG_DUAL = 2, + TE_V1_FRAG_ENDLESS = 0xffffffff +}; + +/* If a Time Event can be fragmented, this is the max number of fragments */ +#define TE_V1_FRAG_MAX_MSK 0x0fffffff +/* Repeat the time event endlessly (until removed) */ +#define TE_V1_REPEAT_ENDLESS 0xffffffff +/* If a Time Event has bounded repetitions, this is the maximal value */ +#define TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff + /* Time Event dependencies: none, on another TE, or in a specific time */ enum { - TE_INDEPENDENT = 0, - TE_DEP_OTHER = 1, - TE_DEP_TSF = 2, - TE_EVENT_SOCIOPATHIC = 4, + TE_V1_INDEPENDENT = 0, + TE_V1_DEP_OTHER = BIT(0), + TE_V1_DEP_TSF = BIT(1), + TE_V1_EVENT_SOCIOPATHIC = BIT(2), }; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */ + /* + * @TE_V1_NOTIF_NONE: no notifications + * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start + * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end + * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use + * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use. + * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start + * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end + * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use. + * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use. + * * Supported Time event notifications configuration. * A notification (both event and fragment) includes a status indicating weather * the FW was able to schedule the event or not. For fragment start/end * notification the status is always success. There is no start/end fragment * notification for monolithic events. - * - * @TE_NOTIF_NONE: no notifications - * @TE_NOTIF_HOST_EVENT_START: request/receive notification on event start - * @TE_NOTIF_HOST_EVENT_END:request/receive notification on event end - * @TE_NOTIF_INTERNAL_EVENT_START: internal FW use - * @TE_NOTIF_INTERNAL_EVENT_END: internal FW use. - * @TE_NOTIF_HOST_FRAG_START: request/receive notification on frag start - * @TE_NOTIF_HOST_FRAG_END:request/receive notification on frag end - * @TE_NOTIF_INTERNAL_FRAG_START: internal FW use. - * @TE_NOTIF_INTERNAL_FRAG_END: internal FW use. */ enum { - TE_NOTIF_NONE = 0, - TE_NOTIF_HOST_EVENT_START = 0x1, - TE_NOTIF_HOST_EVENT_END = 0x2, - TE_NOTIF_INTERNAL_EVENT_START = 0x4, - TE_NOTIF_INTERNAL_EVENT_END = 0x8, - TE_NOTIF_HOST_FRAG_START = 0x10, - TE_NOTIF_HOST_FRAG_END = 0x20, - TE_NOTIF_INTERNAL_FRAG_START = 0x40, - TE_NOTIF_INTERNAL_FRAG_END = 0x80 + TE_V1_NOTIF_NONE = 0, + TE_V1_NOTIF_HOST_EVENT_START = BIT(0), + TE_V1_NOTIF_HOST_EVENT_END = BIT(1), + TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2), + TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3), + TE_V1_NOTIF_HOST_FRAG_START = BIT(4), + TE_V1_NOTIF_HOST_FRAG_END = BIT(5), + TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6), + TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7), }; /* MAC_EVENT_ACTION_API_E_VER_2 */ + +/** + * struct iwl_time_event_cmd_api_v1 - configuring Time Events + * with struct MAC_TIME_EVENT_DATA_API_S_VER_1 (see also + * with version 2. determined by IWL_UCODE_TLV_FLAGS) + * ( TIME_EVENT_CMD = 0x29 ) + * @id_and_color: ID and color of the relevant MAC + * @action: action to perform, one of FW_CTXT_ACTION_* + * @id: this field has two meanings, depending on the action: + * If the action is ADD, then it means the type of event to add. + * For all other actions it is the unique event ID assigned when the + * event was added by the FW. + * @apply_time: When to start the Time Event (in GP2) + * @max_delay: maximum delay to event's start (apply time), in TU + * @depends_on: the unique ID of the event we depend on (if any) + * @interval: interval between repetitions, in TU + * @interval_reciprocal: 2^32 / interval + * @duration: duration of event in TU + * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS + * @dep_policy: one of TE_V1_INDEPENDENT, TE_V1_DEP_OTHER, TE_V1_DEP_TSF + * and TE_V1_EVENT_SOCIOPATHIC + * @is_present: 0 or 1, are we present or absent during the Time Event + * @max_frags: maximal number of fragments the Time Event can be divided to + * @notify: notifications using TE_V1_NOTIF_* (whom to notify when) + */ +struct iwl_time_event_cmd_v1 { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + __le32 id; + /* MAC_TIME_EVENT_DATA_API_S_VER_1 */ + __le32 apply_time; + __le32 max_delay; + __le32 dep_policy; + __le32 depends_on; + __le32 is_present; + __le32 max_frags; + __le32 interval; + __le32 interval_reciprocal; + __le32 duration; + __le32 repeat; + __le32 notify; +} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_1 */ + + +/* Time event - defines for command API v2 */ + /* - * @TE_FRAG_NONE: fragmentation of the time event is NOT allowed. - * @TE_FRAG_SINGLE: fragmentation of the time event is allowed, but only + * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed. + * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only * the first fragment is scheduled. - * @TE_FRAG_DUAL: fragmentation of the time event is allowed, but only + * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only * the first 2 fragments are scheduled. - * @TE_FRAG_ENDLESS: fragmentation of the time event is allowed, and any number - * of fragments are valid. + * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any + * number of fragments are valid. * * Other than the constant defined above, specifying a fragmentation value 'x' * means that the event can be fragmented but only the first 'x' will be * scheduled. */ enum { - TE_FRAG_NONE = 0, - TE_FRAG_SINGLE = 1, - TE_FRAG_DUAL = 2, - TE_FRAG_ENDLESS = 0xffffffff + TE_V2_FRAG_NONE = 0, + TE_V2_FRAG_SINGLE = 1, + TE_V2_FRAG_DUAL = 2, + TE_V2_FRAG_MAX = 0xfe, + TE_V2_FRAG_ENDLESS = 0xff }; /* Repeat the time event endlessly (until removed) */ -#define TE_REPEAT_ENDLESS (0xffffffff) +#define TE_V2_REPEAT_ENDLESS 0xff /* If a Time Event has bounded repetitions, this is the maximal value */ -#define TE_REPEAT_MAX_MSK (0x0fffffff) -/* If a Time Event can be fragmented, this is the max number of fragments */ -#define TE_FRAG_MAX_MSK (0x0fffffff) +#define TE_V2_REPEAT_MAX 0xfe + +#define TE_V2_PLACEMENT_POS 12 +#define TE_V2_ABSENCE_POS 15 + +/* Time event policy values (for time event cmd api v2) + * A notification (both event and fragment) includes a status indicating weather + * the FW was able to schedule the event or not. For fragment start/end + * notification the status is always success. There is no start/end fragment + * notification for monolithic events. + * + * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable + * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start + * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end + * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use + * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use. + * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start + * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end + * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use. + * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use. + * @TE_V2_DEP_OTHER: depends on another time event + * @TE_V2_DEP_TSF: depends on a specific time + * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC + * @TE_V2_ABSENCE: are we present or absent during the Time Event. + */ +enum { + TE_V2_DEFAULT_POLICY = 0x0, + + /* notifications (event start/stop, fragment start/stop) */ + TE_V2_NOTIF_HOST_EVENT_START = BIT(0), + TE_V2_NOTIF_HOST_EVENT_END = BIT(1), + TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2), + TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3), + + TE_V2_NOTIF_HOST_FRAG_START = BIT(4), + TE_V2_NOTIF_HOST_FRAG_END = BIT(5), + TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6), + TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7), + + TE_V2_NOTIF_MSK = 0xff, + + /* placement characteristics */ + TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS), + TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1), + TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2), + + /* are we present or absent during the Time Event. */ + TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS), +}; /** - * struct iwl_time_event_cmd - configuring Time Events + * struct iwl_time_event_cmd_api_v2 - configuring Time Events + * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also + * with version 1. determined by IWL_UCODE_TLV_FLAGS) * ( TIME_EVENT_CMD = 0x29 ) * @id_and_color: ID and color of the relevant MAC * @action: action to perform, one of FW_CTXT_ACTION_* @@ -575,32 +703,30 @@ enum { * @max_delay: maximum delay to event's start (apply time), in TU * @depends_on: the unique ID of the event we depend on (if any) * @interval: interval between repetitions, in TU - * @interval_reciprocal: 2^32 / interval * @duration: duration of event in TU * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS - * @dep_policy: one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF - * @is_present: 0 or 1, are we present or absent during the Time Event * @max_frags: maximal number of fragments the Time Event can be divided to - * @notify: notifications using TE_NOTIF_* (whom to notify when) + * @policy: defines whether uCode shall notify the host or other uCode modules + * on event and/or fragment start and/or end + * using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF + * TE_EVENT_SOCIOPATHIC + * using TE_ABSENCE and using TE_NOTIF_* */ -struct iwl_time_event_cmd { +struct iwl_time_event_cmd_v2 { /* COMMON_INDEX_HDR_API_S_VER_1 */ __le32 id_and_color; __le32 action; __le32 id; - /* MAC_TIME_EVENT_DATA_API_S_VER_1 */ + /* MAC_TIME_EVENT_DATA_API_S_VER_2 */ __le32 apply_time; __le32 max_delay; - __le32 dep_policy; __le32 depends_on; - __le32 is_present; - __le32 max_frags; __le32 interval; - __le32 interval_reciprocal; __le32 duration; - __le32 repeat; - __le32 notify; -} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_1 */ + u8 repeat; + u8 max_frags; + __le16 policy; +} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */ /** * struct iwl_time_event_resp - response structure to iwl_time_event_cmd diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index ad9bbca..7ed94a0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -166,7 +166,7 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, WARN_ONCE(!le32_to_cpu(notif->status), "Failed to schedule time event\n"); - if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_END) { + if (le32_to_cpu(notif->action) & TE_V2_NOTIF_HOST_EVENT_END) { IWL_DEBUG_TE(mvm, "TE ended - current time %lu, estimated end %lu\n", jiffies, te_data->end_jiffies); @@ -189,7 +189,7 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, } iwl_mvm_te_clear_data(mvm, te_data); - } else if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_START) { + } else if (le32_to_cpu(notif->action) & TE_V2_NOTIF_HOST_EVENT_START) { te_data->running = true; te_data->end_jiffies = jiffies + TU_TO_JIFFIES(te_data->duration); @@ -257,10 +257,67 @@ static bool iwl_mvm_time_event_response(struct iwl_notif_wait_data *notif_wait, return true; } +/* used to convert from time event API v2 to v1 */ +#define TE_V2_DEP_POLICY_MSK (TE_V2_DEP_OTHER | TE_V2_DEP_TSF |\ + TE_V2_EVENT_SOCIOPATHIC) +static inline u16 te_v2_get_notify(__le16 policy) +{ + return le16_to_cpu(policy) & TE_V2_NOTIF_MSK; +} + +static inline u16 te_v2_get_dep_policy(__le16 policy) +{ + return (le16_to_cpu(policy) & TE_V2_DEP_POLICY_MSK) >> + TE_V2_PLACEMENT_POS; +} + +static inline u16 te_v2_get_absence(__le16 policy) +{ + return (le16_to_cpu(policy) & TE_V2_ABSENCE) >> TE_V2_ABSENCE_POS; +} + +static void iwl_mvm_te_v2_to_v1(const struct iwl_time_event_cmd_v2 *cmd_v2, + struct iwl_time_event_cmd_v1 *cmd_v1) +{ + cmd_v1->id_and_color = cmd_v2->id_and_color; + cmd_v1->action = cmd_v2->action; + cmd_v1->id = cmd_v2->id; + cmd_v1->apply_time = cmd_v2->apply_time; + cmd_v1->max_delay = cmd_v2->max_delay; + cmd_v1->depends_on = cmd_v2->depends_on; + cmd_v1->interval = cmd_v2->interval; + cmd_v1->duration = cmd_v2->duration; + if (cmd_v2->repeat == TE_V2_REPEAT_ENDLESS) + cmd_v1->repeat = cpu_to_le32(TE_V1_REPEAT_ENDLESS); + else + cmd_v1->repeat = cpu_to_le32(cmd_v2->repeat); + cmd_v1->max_frags = cpu_to_le32(cmd_v2->max_frags); + cmd_v1->interval_reciprocal = 0; /* unused */ + + cmd_v1->dep_policy = cpu_to_le32(te_v2_get_dep_policy(cmd_v2->policy)); + cmd_v1->is_present = cpu_to_le32(!te_v2_get_absence(cmd_v2->policy)); + cmd_v1->notify = cpu_to_le32(te_v2_get_notify(cmd_v2->policy)); +} + +static int iwl_mvm_send_time_event_cmd(struct iwl_mvm *mvm, + const struct iwl_time_event_cmd_v2 *cmd) +{ + struct iwl_time_event_cmd_v1 cmd_v1; + + if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2) + return iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, + sizeof(*cmd), cmd); + + iwl_mvm_te_v2_to_v1(cmd, &cmd_v1); + return iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, + sizeof(cmd_v1), &cmd_v1); +} + + static int iwl_mvm_time_event_send_add(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mvm_time_event_data *te_data, - struct iwl_time_event_cmd *te_cmd) + struct iwl_time_event_cmd_v2 *te_cmd) { static const u8 time_event_response[] = { TIME_EVENT_CMD }; struct iwl_notification_wait wait_time_event; @@ -296,8 +353,7 @@ static int iwl_mvm_time_event_send_add(struct iwl_mvm *mvm, ARRAY_SIZE(time_event_response), iwl_mvm_time_event_response, te_data); - ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, - sizeof(*te_cmd), te_cmd); + ret = iwl_mvm_send_time_event_cmd(mvm, te_cmd); if (ret) { IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); iwl_remove_notification(&mvm->notif_wait, &wait_time_event); @@ -324,7 +380,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; - struct iwl_time_event_cmd time_cmd = {}; + struct iwl_time_event_cmd_v2 time_cmd = {}; lockdep_assert_held(&mvm->mutex); @@ -359,17 +415,14 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, time_cmd.apply_time = cpu_to_le32(iwl_read_prph(mvm->trans, DEVICE_SYSTEM_TIME_REG)); - time_cmd.dep_policy = TE_INDEPENDENT; - time_cmd.is_present = cpu_to_le32(1); - time_cmd.max_frags = cpu_to_le32(TE_FRAG_NONE); + time_cmd.max_frags = TE_V2_FRAG_NONE; time_cmd.max_delay = cpu_to_le32(500); /* TODO: why do we need to interval = bi if it is not periodic? */ time_cmd.interval = cpu_to_le32(1); - time_cmd.interval_reciprocal = cpu_to_le32(iwl_mvm_reciprocal(1)); time_cmd.duration = cpu_to_le32(duration); - time_cmd.repeat = cpu_to_le32(1); - time_cmd.notify = cpu_to_le32(TE_NOTIF_HOST_EVENT_START | - TE_NOTIF_HOST_EVENT_END); + time_cmd.repeat = 1; + time_cmd.policy = cpu_to_le16(TE_V2_NOTIF_HOST_EVENT_START | + TE_V2_NOTIF_HOST_EVENT_END); iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd); } @@ -383,7 +436,7 @@ void iwl_mvm_remove_time_event(struct iwl_mvm *mvm, struct iwl_mvm_vif *mvmvif, struct iwl_mvm_time_event_data *te_data) { - struct iwl_time_event_cmd time_cmd = {}; + struct iwl_time_event_cmd_v2 time_cmd = {}; u32 id, uid; int ret; @@ -420,8 +473,7 @@ void iwl_mvm_remove_time_event(struct iwl_mvm *mvm, cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); IWL_DEBUG_TE(mvm, "Removing TE 0x%x\n", le32_to_cpu(time_cmd.id)); - ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, - sizeof(time_cmd), &time_cmd); + ret = iwl_mvm_send_time_event_cmd(mvm, &time_cmd); if (WARN_ON(ret)) return; } @@ -441,7 +493,7 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; - struct iwl_time_event_cmd time_cmd = {}; + struct iwl_time_event_cmd_v2 time_cmd = {}; lockdep_assert_held(&mvm->mutex); if (te_data->running) { @@ -472,8 +524,6 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, } time_cmd.apply_time = cpu_to_le32(0); - time_cmd.dep_policy = cpu_to_le32(TE_INDEPENDENT); - time_cmd.is_present = cpu_to_le32(1); time_cmd.interval = cpu_to_le32(1); /* @@ -482,12 +532,12 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, * scheduled. To improve the chances of it being scheduled, allow them * to be fragmented, and in addition allow them to be delayed. */ - time_cmd.max_frags = cpu_to_le32(MSEC_TO_TU(duration)/20); + time_cmd.max_frags = min(MSEC_TO_TU(duration)/50, TE_V2_FRAG_ENDLESS); time_cmd.max_delay = cpu_to_le32(MSEC_TO_TU(duration/2)); time_cmd.duration = cpu_to_le32(MSEC_TO_TU(duration)); - time_cmd.repeat = cpu_to_le32(1); - time_cmd.notify = cpu_to_le32(TE_NOTIF_HOST_EVENT_START | - TE_NOTIF_HOST_EVENT_END); + time_cmd.repeat = 1; + time_cmd.policy = cpu_to_le16(TE_V2_NOTIF_HOST_EVENT_START | + TE_V2_NOTIF_HOST_EVENT_END); return iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd); } -- cgit v0.10.2 From 6965a3540a4b45ee5b6fa91276a8134e25e17b63 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Sat, 10 Aug 2013 16:35:45 +0300 Subject: iwlwifi: pcie: don't swallow error codes in iwl_trans_pcie_alloc() The iwl_trans_pcie_alloc() function doesn't pass up error codes returned from functions it calls, swallowing them and returning NULL in all failure cases. The caller checks if the return value is NULL and returns -ENOMEM. This is not correct, because in certain cases the failure was not due to an OOM situation. To fix this, modify the iwl_trans_pcie_alloc() function to use ERR_PTR() to return error codes and clean up the error handling code a bit. Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 9ec8dfe..e179efe 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -324,8 +324,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int ret; iwl_trans = iwl_trans_pcie_alloc(pdev, ent, cfg); - if (iwl_trans == NULL) - return -ENOMEM; + if (IS_ERR(iwl_trans)) + return PTR_ERR(iwl_trans); pci_set_drvdata(pdev, iwl_trans); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index d88c0c7..ff9787f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1381,9 +1381,10 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, trans = kzalloc(sizeof(struct iwl_trans) + sizeof(struct iwl_trans_pcie), GFP_KERNEL); - - if (!trans) - return NULL; + if (!trans) { + err = -ENOMEM; + goto out; + } trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); @@ -1406,10 +1407,9 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, PCIE_LINK_STATE_CLKPM); } - if (pci_enable_device(pdev)) { - err = -ENODEV; + err = pci_enable_device(pdev); + if (err) goto out_no_pci; - } pci_set_master(pdev); @@ -1478,17 +1478,20 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, SLAB_HWCACHE_ALIGN, NULL); - if (!trans->dev_cmd_pool) + if (!trans->dev_cmd_pool) { + err = -ENOMEM; goto out_pci_disable_msi; + } trans_pcie->inta_mask = CSR_INI_SET_MASK; if (iwl_pcie_alloc_ict(trans)) goto out_free_cmd_pool; - if (request_threaded_irq(pdev->irq, iwl_pcie_isr_ict, - iwl_pcie_irq_handler, - IRQF_SHARED, DRV_NAME, trans)) { + err = request_threaded_irq(pdev->irq, iwl_pcie_isr_ict, + iwl_pcie_irq_handler, + IRQF_SHARED, DRV_NAME, trans); + if (err) { IWL_ERR(trans, "Error allocating IRQ %d\n", pdev->irq); goto out_free_ict; } @@ -1507,5 +1510,6 @@ out_pci_disable_device: pci_disable_device(pdev); out_no_pci: kfree(trans); - return NULL; +out: + return ERR_PTR(err); } -- cgit v0.10.2 From ab3077009f3e5237aaddaf0d5d139b1fd59d3b32 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Sun, 4 Aug 2013 12:40:37 +0300 Subject: iwlwifi: mvm: remove rate_scale_data debugfs entry This isn't very informative and can be deduced from rate_scale_table. Remove as a preparation for dropping iwl_rs_rate_info.ieee. Signed-off-by: Eyal Shapira Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index d680c89..199f0cf 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -3009,32 +3009,6 @@ static const struct file_operations rs_sta_dbgfs_stats_table_ops = { .llseek = default_llseek, }; -static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - struct iwl_lq_sta *lq_sta = file->private_data; - struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl]; - char buff[120]; - int desc = 0; - - if (is_Ht(tbl->lq_type)) - desc += sprintf(buff+desc, - "Bit Rate= %d Mb/s\n", - tbl->expected_tpt[lq_sta->last_txrate_idx]); - else - desc += sprintf(buff+desc, - "Bit Rate= %d Mb/s\n", - iwl_rates[lq_sta->last_txrate_idx].ieee >> 1); - - return simple_read_from_buffer(user_buf, count, ppos, buff, desc); -} - -static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { - .read = rs_sta_dbgfs_rate_scale_data_read, - .open = simple_open, - .llseek = default_llseek, -}; - static void rs_add_debugfs(void *mvm, void *mvm_sta, struct dentry *dir) { struct iwl_lq_sta *lq_sta = mvm_sta; @@ -3044,9 +3018,6 @@ static void rs_add_debugfs(void *mvm, void *mvm_sta, struct dentry *dir) lq_sta->rs_sta_dbgfs_stats_table_file = debugfs_create_file("rate_stats_table", S_IRUSR, dir, lq_sta, &rs_sta_dbgfs_stats_table_ops); - lq_sta->rs_sta_dbgfs_rate_scale_data_file = - debugfs_create_file("rate_scale_data", S_IRUSR, dir, - lq_sta, &rs_sta_dbgfs_rate_scale_data_ops); lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, &lq_sta->tx_agg_tid_en); @@ -3057,7 +3028,6 @@ static void rs_remove_debugfs(void *mvm, void *mvm_sta) struct iwl_lq_sta *lq_sta = mvm_sta; debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file); debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); } #endif diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h index 4a99a4d..917a48f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/iwlwifi/mvm/rs.h @@ -330,7 +330,6 @@ struct iwl_lq_sta { #ifdef CONFIG_MAC80211_DEBUGFS struct dentry *rs_sta_dbgfs_scale_table_file; struct dentry *rs_sta_dbgfs_stats_table_file; - struct dentry *rs_sta_dbgfs_rate_scale_data_file; struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; u32 dbg_fixed_rate; #endif -- cgit v0.10.2 From 2ab9ba0fdfa20e81c4454c57f534585a264cb238 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 11 Aug 2013 02:03:21 +0300 Subject: iwlwifi: pcie: returning positive instead of negative There is a missing '-' character here so we return positive 'ENOMEM' instead of negative. The caller doesn't care. All non-zero returns are translated to '-ENOMEM' in iwl_pcie_nic_init(). This is just a cleanup. Signed-off-by: Dan Carpenter Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 12c9c00..f45eb29 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -838,7 +838,7 @@ static int iwl_pcie_tx_alloc(struct iwl_trans *trans) sizeof(struct iwl_txq), GFP_KERNEL); if (!trans_pcie->txq) { IWL_ERR(trans, "Not enough memory for txq\n"); - ret = ENOMEM; + ret = -ENOMEM; goto error; } -- cgit v0.10.2 From ab055ce9f5a9ff7dddf73f58bf1164e96b8af713 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Sun, 4 Aug 2013 13:10:31 +0300 Subject: iwlwifi: mvm: remove unused fields of iwl_rs_rate_info Some more cleanups of unused fields and their initializations. Signed-off-by: Eyal Shapira Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 199f0cf..a69bd4c 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -82,41 +82,36 @@ static const u8 ant_toggle_lookup[] = { [ANT_ABC] = ANT_ABC, }; -#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ +#define IWL_DECLARE_RATE_INFO(r, s, rp, rn) \ [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ IWL_RATE_SISO_##s##M_PLCP, \ IWL_RATE_MIMO2_##s##M_PLCP,\ IWL_RATE_MIMO3_##s##M_PLCP,\ - IWL_RATE_##r##M_IEEE, \ - IWL_RATE_##ip##M_INDEX, \ - IWL_RATE_##in##M_INDEX, \ IWL_RATE_##rp##M_INDEX, \ - IWL_RATE_##rn##M_INDEX, \ - IWL_RATE_##pp##M_INDEX, \ - IWL_RATE_##np##M_INDEX } + IWL_RATE_##rn##M_INDEX } /* * Parameter order: - * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate + * rate, ht rate, prev rate, next rate * * If there isn't a valid next or previous rate then INV is used which * maps to IWL_RATE_INVALID * */ static const struct iwl_rs_rate_info iwl_rates[IWL_RATE_COUNT] = { - IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ - IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ - IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ - IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ + IWL_DECLARE_RATE_INFO(1, INV, INV, 2), /* 1mbps */ + IWL_DECLARE_RATE_INFO(2, INV, 1, 5), /* 2mbps */ + IWL_DECLARE_RATE_INFO(5, INV, 2, 11), /*5.5mbps */ + IWL_DECLARE_RATE_INFO(11, INV, 9, 12), /* 11mbps */ + IWL_DECLARE_RATE_INFO(6, 6, 5, 11), /* 6mbps */ + IWL_DECLARE_RATE_INFO(9, 6, 6, 11), /* 9mbps */ + IWL_DECLARE_RATE_INFO(12, 12, 11, 18), /* 12mbps */ + IWL_DECLARE_RATE_INFO(18, 18, 12, 24), /* 18mbps */ + IWL_DECLARE_RATE_INFO(24, 24, 18, 36), /* 24mbps */ + IWL_DECLARE_RATE_INFO(36, 36, 24, 48), /* 36mbps */ + IWL_DECLARE_RATE_INFO(48, 48, 36, 54), /* 48mbps */ + IWL_DECLARE_RATE_INFO(54, 54, 48, INV), /* 54mbps */ + IWL_DECLARE_RATE_INFO(60, 60, 48, INV), /* 60mbps */ /* FIXME:RS: ^^ should be INV (legacy) */ }; diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h index 917a48f..9ac7c0b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/iwlwifi/mvm/rs.h @@ -39,13 +39,8 @@ struct iwl_rs_rate_info { u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ - u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ - u8 prev_ieee; /* previous rate in IEEE speeds */ - u8 next_ieee; /* next rate in IEEE speeds */ u8 prev_rs; /* previous rate used in rs algo */ u8 next_rs; /* next rate used in rs algo */ - u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ - u8 next_rs_tgg; /* next rate used in TGG rs algo */ }; #define IWL_RATE_60M_PLCP 3 @@ -120,23 +115,6 @@ enum { IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, }; -/* MAC header values for bit rates */ -enum { - IWL_RATE_6M_IEEE = 12, - IWL_RATE_9M_IEEE = 18, - IWL_RATE_12M_IEEE = 24, - IWL_RATE_18M_IEEE = 36, - IWL_RATE_24M_IEEE = 48, - IWL_RATE_36M_IEEE = 72, - IWL_RATE_48M_IEEE = 96, - IWL_RATE_54M_IEEE = 108, - IWL_RATE_60M_IEEE = 120, - IWL_RATE_1M_IEEE = 2, - IWL_RATE_2M_IEEE = 4, - IWL_RATE_5M_IEEE = 11, - IWL_RATE_11M_IEEE = 22, -}; - #define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) #define IWL_INVALID_VALUE -1 -- cgit v0.10.2 From faec6f91f52838ead8dabb8545b1312bdd32da4b Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Wed, 17 Jul 2013 09:16:30 +0300 Subject: iwlwifi: mvm: don't clear tbl->win mistakenly rs_get_tbl_info_from_mcs() mistakenly clears the rate histories window, overriding its initialization values (i.e. filling it with 0, instead of -1). Signed-off-by: Eliad Peller Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index a69bd4c..a587b21 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -492,7 +492,7 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); u8 mcs; - memset(tbl, 0, sizeof(struct iwl_scale_tbl_info)); + memset(tbl, 0, offsetof(struct iwl_scale_tbl_info, win)); *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); if (*rate_idx == IWL_RATE_INVALID) { -- cgit v0.10.2 From e3c588ec0d9ef4e52caf0704a007440fb381d97f Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sun, 7 Apr 2013 14:08:59 +0300 Subject: iwlwifi: mvm: Add basic uAPSD client support Implement basic uAPSD client support adding the following: - Advertise uAPSD support in HW capabilities - Set all ACs trigger- and delivery-enabled - Set max SP length to 2 buffered frames - Assign QNDP with the highest TID with no mandatory admission control required - Set uAPSD related parameters in Power Table command Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h index 64656e0..33f98fc 100644 --- a/drivers/net/wireless/iwlwifi/mvm/constants.h +++ b/drivers/net/wireless/iwlwifi/mvm/constants.h @@ -67,5 +67,11 @@ #define IWL_MVM_DEFAULT_PS_RX_DATA_TIMEOUT (100 * USEC_PER_MSEC) #define IWL_MVM_WOWLAN_PS_TX_DATA_TIMEOUT (10 * USEC_PER_MSEC) #define IWL_MVM_WOWLAN_PS_RX_DATA_TIMEOUT (10 * USEC_PER_MSEC) +#define IWL_MVM_UAPSD_RX_DATA_TIMEOUT (50 * USEC_PER_MSEC) +#define IWL_MVM_UAPSD_TX_DATA_TIMEOUT (50 * USEC_PER_MSEC) +#define IWL_MVM_PS_HEAVY_TX_THLD_PACKETS 20 +#define IWL_MVM_PS_HEAVY_RX_THLD_PACKETS 20 +#define IWL_MVM_PS_HEAVY_TX_THLD_PERCENT 50 +#define IWL_MVM_PS_HEAVY_RX_THLD_PERCENT 50 #endif /* __MVM_CONSTANTS_H */ diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c index 3cdc005..14811a5 100644 --- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c @@ -424,7 +424,7 @@ static ssize_t iwl_dbgfs_pm_params_read(struct file *file, struct ieee80211_vif *vif = file->private_data; struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm *mvm = mvmvif->dbgfs_data; - char buf[256]; + char buf[512]; int bufsz = sizeof(buf); int pos; diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index 060e630..bb010b3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -164,10 +164,10 @@ struct iwl_powertable_cmd { * Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values. * @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct * values. - * @heavy_traffic_thr_tx_pkts: TX threshold measured in number of packets - * @heavy_traffic_thr_rx_pkts: RX threshold measured in number of packets - * @heavy_traffic_thr_tx_load: TX threshold measured in load's percentage - * @heavy_traffic_thr_rx_load: RX threshold measured in load's percentage + * @heavy_tx_thld_packets: TX threshold measured in number of packets + * @heavy_rx_thld_packets: RX threshold measured in number of packets + * @heavy_tx_thld_percentage: TX threshold measured in load's percentage + * @heavy_rx_thld_percentage: RX threshold measured in load's percentage * @limited_ps_threshold: */ struct iwl_mac_power_cmd { @@ -189,10 +189,10 @@ struct iwl_mac_power_cmd { u8 qndp_tid; u8 uapsd_ac_flags; u8 uapsd_max_sp; - u8 heavy_traffic_threshold_tx_packets; - u8 heavy_traffic_threshold_rx_packets; - u8 heavy_traffic_threshold_tx_percentage; - u8 heavy_traffic_threshold_rx_percentage; + u8 heavy_tx_thld_packets; + u8 heavy_rx_thld_packets; + u8 heavy_tx_thld_percentage; + u8 heavy_rx_thld_percentage; u8 limited_ps_threshold; u8 reserved; } __packed; diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 05daa90..66803b9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -155,7 +155,8 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_TIMING_BEACON_ONLY | IEEE80211_HW_CONNECTION_MONITOR | IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | - IEEE80211_HW_SUPPORTS_STATIC_SMPS; + IEEE80211_HW_SUPPORTS_STATIC_SMPS | + IEEE80211_HW_SUPPORTS_UAPSD; hw->queues = IWL_MVM_FIRST_AGG_QUEUE; hw->offchannel_tx_hw_queue = IWL_MVM_OFFCHANNEL_QUEUE; @@ -190,6 +191,8 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->wiphy->max_remain_on_channel_duration = 10000; hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; + hw->uapsd_queues = IWL_UAPSD_AC_INFO; + hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; /* Extract MAC address */ memcpy(mvm->addresses[0].addr, mvm->nvm_data->hw_addr, ETH_ALEN); @@ -812,7 +815,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, */ iwl_mvm_remove_time_event(mvm, mvmvif, &mvmvif->time_event_data); - } else if (changes & BSS_CHANGED_PS) { + } else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_QOS)) { ret = iwl_mvm_power_update_mode(mvm, vif); if (ret) IWL_ERR(mvm, "failed to update power mode\n"); diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index 76f6a1f..014d779 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -153,6 +153,11 @@ enum iwl_power_scheme { }; #define IWL_CONN_MAX_LISTEN_INTERVAL 70 +#define IWL_UAPSD_AC_INFO (IEEE80211_WMM_IE_STA_QOSINFO_AC_VO |\ + IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |\ + IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |\ + IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) +#define IWL_UAPSD_MAX_SP IEEE80211_WMM_IE_STA_QOSINFO_SP_2 struct iwl_mvm_power_ops { int (*power_update_mode)(struct iwl_mvm *mvm, diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index 4e7c9f2..9c9b5ba 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -140,17 +140,30 @@ static void iwl_mvm_power_log(struct iwl_mvm *mvm, IWL_DEBUG_POWER(mvm, "Keep alive = %u sec\n", le16_to_cpu(cmd->keep_alive_seconds)); - if (cmd->flags & cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK)) { - IWL_DEBUG_POWER(mvm, "Rx timeout = %u usec\n", - le32_to_cpu(cmd->rx_data_timeout)); - IWL_DEBUG_POWER(mvm, "Tx timeout = %u usec\n", - le32_to_cpu(cmd->tx_data_timeout)); - if (cmd->flags & cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK)) - IWL_DEBUG_POWER(mvm, "DTIM periods to skip = %u\n", - cmd->skip_dtim_periods); - if (cmd->flags & cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK)) - IWL_DEBUG_POWER(mvm, "LP RX RSSI threshold = %u\n", - cmd->lprx_rssi_threshold); + if (!(cmd->flags & cpu_to_le16(POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK))) { + IWL_DEBUG_POWER(mvm, "Disable power management\n"); + return; + } + + IWL_DEBUG_POWER(mvm, "Rx timeout = %u usec\n", + le32_to_cpu(cmd->rx_data_timeout)); + IWL_DEBUG_POWER(mvm, "Tx timeout = %u usec\n", + le32_to_cpu(cmd->tx_data_timeout)); + if (cmd->flags & cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK)) + IWL_DEBUG_POWER(mvm, "DTIM periods to skip = %u\n", + cmd->skip_dtim_periods); + if (cmd->flags & cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK)) + IWL_DEBUG_POWER(mvm, "LP RX RSSI threshold = %u\n", + cmd->lprx_rssi_threshold); + if (cmd->flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK)) { + IWL_DEBUG_POWER(mvm, "uAPSD enabled\n"); + IWL_DEBUG_POWER(mvm, "Rx timeout (uAPSD) = %u usec\n", + le32_to_cpu(cmd->rx_data_timeout_uapsd)); + IWL_DEBUG_POWER(mvm, "Tx timeout (uAPSD) = %u usec\n", + le32_to_cpu(cmd->tx_data_timeout_uapsd)); + IWL_DEBUG_POWER(mvm, "QNDP TID = %d\n", cmd->qndp_tid); + IWL_DEBUG_POWER(mvm, "ACs flags = 0x%x\n", cmd->uapsd_ac_flags); + IWL_DEBUG_POWER(mvm, "Max SP = %d\n", cmd->uapsd_max_sp); } } @@ -166,6 +179,8 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, bool radar_detect = false; struct iwl_mvm_vif *mvmvif __maybe_unused = iwl_mvm_vif_from_mac80211(vif); + enum ieee80211_ac_numbers ac; + bool tid_found = false; cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); @@ -235,6 +250,49 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, cpu_to_le32(IWL_MVM_WOWLAN_PS_TX_DATA_TIMEOUT); } + for (ac = IEEE80211_AC_VO; ac <= IEEE80211_AC_BK; ac++) { + if (!mvmvif->queue_params[ac].uapsd) + continue; + + cmd->flags |= cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK); + cmd->uapsd_ac_flags |= BIT(ac); + + /* QNDP TID - the highest TID with no admission control */ + if (!tid_found && !mvmvif->queue_params[ac].acm) { + tid_found = true; + switch (ac) { + case IEEE80211_AC_VO: + cmd->qndp_tid = 6; + break; + case IEEE80211_AC_VI: + cmd->qndp_tid = 5; + break; + case IEEE80211_AC_BE: + cmd->qndp_tid = 0; + break; + case IEEE80211_AC_BK: + cmd->qndp_tid = 1; + break; + } + } + } + + if (cmd->flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK)) { + cmd->rx_data_timeout_uapsd = + cpu_to_le32(IWL_MVM_UAPSD_RX_DATA_TIMEOUT); + cmd->tx_data_timeout_uapsd = + cpu_to_le32(IWL_MVM_UAPSD_TX_DATA_TIMEOUT); + cmd->uapsd_max_sp = IWL_UAPSD_MAX_SP; + cmd->heavy_tx_thld_packets = + IWL_MVM_PS_HEAVY_TX_THLD_PACKETS; + cmd->heavy_rx_thld_packets = + IWL_MVM_PS_HEAVY_RX_THLD_PACKETS; + cmd->heavy_tx_thld_percentage = + IWL_MVM_PS_HEAVY_TX_THLD_PERCENT; + cmd->heavy_rx_thld_percentage = + IWL_MVM_PS_HEAVY_RX_THLD_PERCENT; + } + #ifdef CONFIG_IWLWIFI_DEBUGFS if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_KEEP_ALIVE) cmd->keep_alive_seconds = @@ -342,8 +400,6 @@ static int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm, (cmd.flags & cpu_to_le16(POWER_FLAGS_POWER_SAVE_ENA_MSK)) ? 0 : 1); - pos += scnprintf(buf+pos, bufsz-pos, "skip_dtim_periods = %d\n", - cmd.skip_dtim_periods); pos += scnprintf(buf+pos, bufsz-pos, "power_scheme = %d\n", iwlmvm_mod_params.power_scheme); pos += scnprintf(buf+pos, bufsz-pos, "flags = 0x%x\n", @@ -356,14 +412,51 @@ static int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm, (cmd.flags & cpu_to_le16(POWER_FLAGS_SKIP_OVER_DTIM_MSK)) ? 1 : 0); - pos += scnprintf(buf+pos, bufsz-pos, "rx_data_timeout = %d\n", - le32_to_cpu(cmd.rx_data_timeout)); - pos += scnprintf(buf+pos, bufsz-pos, "tx_data_timeout = %d\n", - le32_to_cpu(cmd.tx_data_timeout)); + pos += scnprintf(buf+pos, bufsz-pos, "skip_dtim_periods = %d\n", + cmd.skip_dtim_periods); + if (!(cmd.flags & + cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK))) { + pos += scnprintf(buf+pos, bufsz-pos, + "rx_data_timeout = %d\n", + le32_to_cpu(cmd.rx_data_timeout)); + pos += scnprintf(buf+pos, bufsz-pos, + "tx_data_timeout = %d\n", + le32_to_cpu(cmd.tx_data_timeout)); + } if (cmd.flags & cpu_to_le16(POWER_FLAGS_LPRX_ENA_MSK)) pos += scnprintf(buf+pos, bufsz-pos, "lprx_rssi_threshold = %d\n", cmd.lprx_rssi_threshold); + if (cmd.flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK)) { + pos += + scnprintf(buf+pos, bufsz-pos, + "rx_data_timeout_uapsd = %d\n", + le32_to_cpu(cmd.rx_data_timeout_uapsd)); + pos += + scnprintf(buf+pos, bufsz-pos, + "tx_data_timeout_uapsd = %d\n", + le32_to_cpu(cmd.tx_data_timeout_uapsd)); + pos += scnprintf(buf+pos, bufsz-pos, "qndp_tid = %d\n", + cmd.qndp_tid); + pos += scnprintf(buf+pos, bufsz-pos, + "uapsd_ac_flags = 0x%x\n", + cmd.uapsd_ac_flags); + pos += scnprintf(buf+pos, bufsz-pos, + "uapsd_max_sp = %d\n", + cmd.uapsd_max_sp); + pos += scnprintf(buf+pos, bufsz-pos, + "heavy_tx_thld_packets = %d\n", + cmd.heavy_tx_thld_packets); + pos += scnprintf(buf+pos, bufsz-pos, + "heavy_rx_thld_packets = %d\n", + cmd.heavy_rx_thld_packets); + pos += scnprintf(buf+pos, bufsz-pos, + "heavy_tx_thld_percentage = %d\n", + cmd.heavy_tx_thld_percentage); + pos += scnprintf(buf+pos, bufsz-pos, + "heavy_rx_thld_percentage = %d\n", + cmd.heavy_rx_thld_percentage); + } } return pos; } -- cgit v0.10.2 From d972ab31b90cf1c61f6f77a1968244280930c000 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Sun, 28 Jul 2013 23:02:45 +0000 Subject: iwlwifi: mvm: remove MIMO3 from rate scale code Current and future chips supported by mvm will only have a maximum of 2 antennas so all the MIMO3 related code and states can be dropped. Signed-off-by: Eyal Shapira Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index a587b21..5cb3132 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -86,7 +86,6 @@ static const u8 ant_toggle_lookup[] = { [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ IWL_RATE_SISO_##s##M_PLCP, \ IWL_RATE_MIMO2_##s##M_PLCP,\ - IWL_RATE_MIMO3_##s##M_PLCP,\ IWL_RATE_##rp##M_INDEX, \ IWL_RATE_##rn##M_INDEX } @@ -129,9 +128,8 @@ static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) if (rate_n_flags & RATE_MCS_HT_MSK) { idx = rs_extract_rate(rate_n_flags); - if (idx >= IWL_RATE_MIMO3_6M_PLCP) - idx = idx - IWL_RATE_MIMO3_6M_PLCP; - else if (idx >= IWL_RATE_MIMO2_6M_PLCP) + WARN_ON_ONCE(idx >= IWL_RATE_MIMO3_6M_PLCP); + if (idx >= IWL_RATE_MIMO2_6M_PLCP) idx = idx - IWL_RATE_MIMO2_6M_PLCP; idx += IWL_FIRST_OFDM_RATE; @@ -213,20 +211,6 @@ static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */ }; -static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */ - {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */ - {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */ - {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */ -}; - -static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */ - {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */ - {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */ - {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */ -}; - /* mbps, mcs */ static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { { "1", "BPSK DSSS"}, @@ -274,7 +258,6 @@ static void rs_program_fix_rate(struct iwl_mvm *mvm, lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ IWL_DEBUG_RATE(mvm, "sta_id %d rate 0x%X\n", lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); @@ -454,7 +437,7 @@ static u32 rate_n_flags_from_tbl(struct iwl_mvm *mvm, else if (is_mimo2(tbl->lq_type)) rate_n_flags |= iwl_rates[index].plcp_mimo2; else - rate_n_flags |= iwl_rates[index].plcp_mimo3; + WARN_ON_ONCE(1); } else { IWL_ERR(mvm, "Invalid tbl->lq_type %d\n", tbl->lq_type); } @@ -531,12 +514,8 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { if (num_of_ant == 2) tbl->lq_type = LQ_MIMO2; - /* MIMO3 */ } else { - if (num_of_ant == 3) { - tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; - tbl->lq_type = LQ_MIMO3; - } + WARN_ON_ONCE(num_of_ant == 3); } } return 0; @@ -602,10 +581,10 @@ static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, } else { if (is_siso(rate_type)) return lq_sta->active_siso_rate; - else if (is_mimo2(rate_type)) + else { + WARN_ON_ONCE(!is_mimo2(rate_type)); return lq_sta->active_mimo2_rate; - else - return lq_sta->active_mimo3_rate; + } } } @@ -980,7 +959,7 @@ static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, } /* Choose among many HT tables depending on number of streams - * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation + * (SISO/MIMO2), channel width (20/40), SGI, and aggregation * status */ if (is_siso(tbl->lq_type) && !tbl->is_ht40) ht_tbl_pointer = expected_tpt_siso20MHz; @@ -988,12 +967,10 @@ static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, ht_tbl_pointer = expected_tpt_siso40MHz; else if (is_mimo2(tbl->lq_type) && !tbl->is_ht40) ht_tbl_pointer = expected_tpt_mimo2_20MHz; - else if (is_mimo2(tbl->lq_type)) + else { + WARN_ON_ONCE(!is_mimo2(tbl->lq_type)); ht_tbl_pointer = expected_tpt_mimo2_40MHz; - else if (is_mimo3(tbl->lq_type) && !tbl->is_ht40) - ht_tbl_pointer = expected_tpt_mimo3_20MHz; - else /* if (is_mimo3(tbl->lq_type)) <-- must be true */ - ht_tbl_pointer = expected_tpt_mimo3_40MHz; + } if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */ tbl->expected_tpt = ht_tbl_pointer[0]; @@ -1165,58 +1142,6 @@ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, } /* - * Set up search table for MIMO3 - */ -static int rs_switch_to_mimo3(struct iwl_mvm *mvm, - struct iwl_lq_sta *lq_sta, - struct ieee80211_sta *sta, - struct iwl_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - s32 rate; - s8 is_green = lq_sta->is_green; - - if (!sta->ht_cap.ht_supported) - return -1; - - if (sta->smps_mode == IEEE80211_SMPS_STATIC) - return -1; - - /* Need both Tx chains/antennas to support MIMO */ - if (num_of_ant(iwl_fw_valid_tx_ant(mvm->fw)) < 3) - return -1; - - IWL_DEBUG_RATE(mvm, "LQ: try to switch to MIMO3\n"); - - tbl->lq_type = LQ_MIMO3; - tbl->action = 0; - tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; - rate_mask = lq_sta->active_mimo3_rate; - - if (iwl_is_ht40_tx_allowed(sta)) - tbl->is_ht40 = 1; - else - tbl->is_ht40 = 0; - - rs_set_expected_tpt_table(lq_sta, tbl); - - rate = rs_get_best_rate(mvm, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE(mvm, "LQ: MIMO3 best rate %d mask %X\n", - rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE(mvm, "Can't switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(mvm, tbl, rate, is_green); - - IWL_DEBUG_RATE(mvm, "LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* * Set up search table for SISO */ static int rs_switch_to_siso(struct iwl_mvm *mvm, @@ -1325,21 +1250,14 @@ static int rs_move_legacy_other(struct iwl_mvm *mvm, } break; - case IWL_LEGACY_SWITCH_MIMO2_AB: - case IWL_LEGACY_SWITCH_MIMO2_AC: - case IWL_LEGACY_SWITCH_MIMO2_BC: + case IWL_LEGACY_SWITCH_MIMO2: IWL_DEBUG_RATE(mvm, "LQ: Legacy switch to MIMO2\n"); /* Set up search table to try MIMO */ memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = 0; - if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; + search_tbl->ant_type = ANT_AB; if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) @@ -1352,30 +1270,11 @@ static int rs_move_legacy_other(struct iwl_mvm *mvm, goto out; } break; - - case IWL_LEGACY_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(mvm, "LQ: Legacy switch to MIMO3\n"); - - /* Set up search table to try MIMO3 */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, - search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(mvm, lq_sta, sta, - search_tbl, index); - if (!ret) { - lq_sta->action_counter = 0; - goto out; - } - break; + default: + WARN_ON_ONCE(1); } tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; if (tbl->action == start_action) @@ -1387,7 +1286,7 @@ static int rs_move_legacy_other(struct iwl_mvm *mvm, out: lq_sta->search_better_tbl = 1; tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; if (update_search_tbl_counter) search_tbl->action = tbl->action; @@ -1422,7 +1321,7 @@ static int rs_move_siso_to_other(struct iwl_mvm *mvm, case IWL_BT_COEX_TRAFFIC_LOAD_LOW: /* avoid antenna B unless MIMO */ if (tbl->action == IWL_SISO_SWITCH_ANTENNA2) - tbl->action = IWL_SISO_SWITCH_MIMO2_AB; + tbl->action = IWL_SISO_SWITCH_MIMO2; break; case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: @@ -1464,19 +1363,12 @@ static int rs_move_siso_to_other(struct iwl_mvm *mvm, goto out; } break; - case IWL_SISO_SWITCH_MIMO2_AB: - case IWL_SISO_SWITCH_MIMO2_AC: - case IWL_SISO_SWITCH_MIMO2_BC: + case IWL_SISO_SWITCH_MIMO2: IWL_DEBUG_RATE(mvm, "LQ: SISO switch to MIMO2\n"); memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = 0; - if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; + search_tbl->ant_type = ANT_AB; if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) @@ -1517,24 +1409,11 @@ static int rs_move_siso_to_other(struct iwl_mvm *mvm, index, is_green); update_search_tbl_counter = 1; goto out; - case IWL_SISO_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(mvm, "LQ: SISO switch to MIMO3\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, - search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(mvm, lq_sta, sta, - search_tbl, index); - if (!ret) - goto out; - break; + default: + WARN_ON_ONCE(1); } tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) + if (tbl->action > IWL_SISO_SWITCH_GI) tbl->action = IWL_SISO_SWITCH_ANTENNA1; if (tbl->action == start_action) @@ -1546,7 +1425,7 @@ static int rs_move_siso_to_other(struct iwl_mvm *mvm, out: lq_sta->search_better_tbl = 1; tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC) + if (tbl->action > IWL_SISO_SWITCH_GI) tbl->action = IWL_SISO_SWITCH_ANTENNA1; if (update_search_tbl_counter) search_tbl->action = tbl->action; @@ -1587,8 +1466,7 @@ static int rs_move_mimo2_to_other(struct iwl_mvm *mvm, break; case IWL_BT_COEX_TRAFFIC_LOAD_LOW: /* avoid antenna B unless MIMO */ - if (tbl->action == IWL_MIMO2_SWITCH_SISO_B || - tbl->action == IWL_MIMO2_SWITCH_SISO_C) + if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) tbl->action = IWL_MIMO2_SWITCH_SISO_A; break; default: @@ -1621,7 +1499,6 @@ static int rs_move_mimo2_to_other(struct iwl_mvm *mvm, break; case IWL_MIMO2_SWITCH_SISO_A: case IWL_MIMO2_SWITCH_SISO_B: - case IWL_MIMO2_SWITCH_SISO_C: IWL_DEBUG_RATE(mvm, "LQ: MIMO2 switch to SISO\n"); /* Set up new search table for SISO */ @@ -1629,10 +1506,8 @@ static int rs_move_mimo2_to_other(struct iwl_mvm *mvm, if (tbl->action == IWL_MIMO2_SWITCH_SISO_A) search_tbl->ant_type = ANT_A; - else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) + else /* tbl->action == IWL_MIMO2_SWITCH_SISO_B */ search_tbl->ant_type = ANT_B; - else - search_tbl->ant_type = ANT_C; if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) @@ -1675,26 +1550,11 @@ static int rs_move_mimo2_to_other(struct iwl_mvm *mvm, index, is_green); update_search_tbl_counter = 1; goto out; - - case IWL_MIMO2_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(mvm, "LQ: MIMO2 switch to MIMO3\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, - search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(mvm, lq_sta, sta, - search_tbl, index); - if (!ret) - goto out; - - break; + default: + WARN_ON_ONCE(1); } tbl->action++; - if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) + if (tbl->action > IWL_MIMO2_SWITCH_GI) tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; if (tbl->action == start_action) @@ -1705,7 +1565,7 @@ static int rs_move_mimo2_to_other(struct iwl_mvm *mvm, out: lq_sta->search_better_tbl = 1; tbl->action++; - if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) + if (tbl->action > IWL_MIMO2_SWITCH_GI) tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; if (update_search_tbl_counter) search_tbl->action = tbl->action; @@ -1714,171 +1574,6 @@ static int rs_move_mimo2_to_other(struct iwl_mvm *mvm, } /* - * Try to switch to new modulation mode from MIMO3 - */ -static int rs_move_mimo3_to_other(struct iwl_mvm *mvm, - struct iwl_lq_sta *lq_sta, - struct ieee80211_sta *sta, int index) -{ - s8 is_green = lq_sta->is_green; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw); - u8 tx_chains_num = num_of_ant(valid_tx_ant); - int ret; - u8 update_search_tbl_counter = 0; - - switch (BT_MBOX_MSG(&mvm->last_bt_notif, 3, TRAFFIC_LOAD)) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - if (tbl->action != IWL_MIMO3_SWITCH_SISO_A) - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - if (tbl->action == IWL_MIMO3_SWITCH_SISO_B || - tbl->action == IWL_MIMO3_SWITCH_SISO_C) - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - break; - default: - IWL_ERR(mvm, "Invalid BT load %d", - BT_MBOX_MSG(&mvm->last_bt_notif, 3, TRAFFIC_LOAD)); - break; - } - - start_action = tbl->action; - while (1) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_MIMO3_SWITCH_ANTENNA1: - case IWL_MIMO3_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(mvm, "LQ: MIMO3 toggle Antennas\n"); - - if (tx_chains_num <= 3) - break; - - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, - search_tbl)) - goto out; - break; - case IWL_MIMO3_SWITCH_SISO_A: - case IWL_MIMO3_SWITCH_SISO_B: - case IWL_MIMO3_SWITCH_SISO_C: - IWL_DEBUG_RATE(mvm, "LQ: MIMO3 switch to SISO\n"); - - /* Set up new search table for SISO */ - memcpy(search_tbl, tbl, sz); - - if (tbl->action == IWL_MIMO3_SWITCH_SISO_A) - search_tbl->ant_type = ANT_A; - else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B) - search_tbl->ant_type = ANT_B; - else - search_tbl->ant_type = ANT_C; - - if (!rs_is_valid_ant(valid_tx_ant, - search_tbl->ant_type)) - break; - - ret = rs_switch_to_siso(mvm, lq_sta, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - - case IWL_MIMO3_SWITCH_MIMO2_AB: - case IWL_MIMO3_SWITCH_MIMO2_AC: - case IWL_MIMO3_SWITCH_MIMO2_BC: - IWL_DEBUG_RATE(mvm, "LQ: MIMO3 switch to MIMO2\n"); - - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; - - if (!rs_is_valid_ant(valid_tx_ant, - search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo2(mvm, lq_sta, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - - case IWL_MIMO3_SWITCH_GI: - if (!tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_20)) - break; - if (tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_40)) - break; - - IWL_DEBUG_RATE(mvm, "LQ: MIMO3 toggle SGI/NGI\n"); - - /* Set up new search table for MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - /* - * If active table already uses the fastest possible - * modulation (dual stream with short guard interval), - * and it's working well, there's no need to look - * for a better type of modulation! - */ - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = - rate_n_flags_from_tbl(mvm, search_tbl, - index, is_green); - update_search_tbl_counter = 1; - goto out; - } - tbl->action++; - if (tbl->action > IWL_MIMO3_SWITCH_GI) - tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - } - search_tbl->lq_type = LQ_NONE; - return 0; - out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_MIMO3_SWITCH_GI) - tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - - return 0; -} - -/* * Check whether we should continue using same modulation mode, or * begin search for a new mode, based on: * 1) # tx successes or failures while using this mode @@ -2284,8 +1979,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm, scale_action = 0; if ((BT_MBOX_MSG(&mvm->last_bt_notif, 3, TRAFFIC_LOAD) >= - IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && - (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { + IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && (is_mimo(tbl->lq_type))) { if (lq_sta->last_bt_traffic > BT_MBOX_MSG(&mvm->last_bt_notif, 3, TRAFFIC_LOAD)) { /* @@ -2302,8 +1996,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm, BT_MBOX_MSG(&mvm->last_bt_notif, 3, TRAFFIC_LOAD); if ((BT_MBOX_MSG(&mvm->last_bt_notif, 3, TRAFFIC_LOAD) >= - IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && - (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { + IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && is_mimo(tbl->lq_type)) { /* search for a new modulation */ rs_stay_in_table(lq_sta, true); goto lq_update; @@ -2363,7 +2056,7 @@ lq_update: else if (is_mimo2(tbl->lq_type)) rs_move_mimo2_to_other(mvm, lq_sta, sta, index); else - rs_move_mimo3_to_other(mvm, lq_sta, sta, index); + WARN_ON_ONCE(1); /* If new "search" mode was selected, set up in uCode table */ if (lq_sta->search_better_tbl) { @@ -2528,11 +2221,10 @@ static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta, rate_idx -= IWL_FIRST_OFDM_RATE; /* 6M and 9M shared same MCS index */ rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0; + WARN_ON_ONCE(rs_extract_rate(lq_sta->last_rate_n_flags) >= + IWL_RATE_MIMO3_6M_PLCP); if (rs_extract_rate(lq_sta->last_rate_n_flags) >= - IWL_RATE_MIMO3_6M_PLCP) - rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM); - else if (rs_extract_rate(lq_sta->last_rate_n_flags) >= - IWL_RATE_MIMO2_6M_PLCP) + IWL_RATE_MIMO2_6M_PLCP) rate_idx = rate_idx + MCS_INDEX_PER_STREAM; info->control.rates[0].flags = IEEE80211_TX_RC_MCS; if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK) @@ -2631,16 +2323,10 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, lq_sta->active_mimo2_rate &= ~((u16)0x2); lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; - lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1; - lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1; - lq_sta->active_mimo3_rate &= ~((u16)0x2); - lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; - IWL_DEBUG_RATE(mvm, - "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", + "SISO-RATE=%X MIMO2-RATE=%X\n", lq_sta->active_siso_rate, - lq_sta->active_mimo2_rate, - lq_sta->active_mimo3_rate); + lq_sta->active_mimo2_rate); /* These values will be overridden later */ lq_sta->lq.single_stream_ant_msk = @@ -2903,8 +2589,7 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, (is_legacy(tbl->lq_type)) ? "legacy" : "HT"); if (is_Ht(tbl->lq_type)) { desc += sprintf(buff+desc, " %s", - (is_siso(tbl->lq_type)) ? "SISO" : - ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3")); + (is_siso(tbl->lq_type)) ? "SISO" : "MIMO2"); desc += sprintf(buff+desc, " %s", (tbl->is_ht40) ? "40MHz" : "20MHz"); desc += sprintf(buff+desc, " %s %s %s\n", diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h index 9ac7c0b..335cf16 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/iwlwifi/mvm/rs.h @@ -38,7 +38,6 @@ struct iwl_rs_rate_info { u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ - u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ u8 prev_rs; /* previous rate used in rs algo */ u8 next_rs; /* next rate used in rs algo */ }; @@ -143,47 +142,22 @@ enum { #define IWL_LEGACY_SWITCH_ANTENNA1 0 #define IWL_LEGACY_SWITCH_ANTENNA2 1 #define IWL_LEGACY_SWITCH_SISO 2 -#define IWL_LEGACY_SWITCH_MIMO2_AB 3 -#define IWL_LEGACY_SWITCH_MIMO2_AC 4 -#define IWL_LEGACY_SWITCH_MIMO2_BC 5 -#define IWL_LEGACY_SWITCH_MIMO3_ABC 6 +#define IWL_LEGACY_SWITCH_MIMO2 3 /* possible actions when in siso mode */ #define IWL_SISO_SWITCH_ANTENNA1 0 #define IWL_SISO_SWITCH_ANTENNA2 1 -#define IWL_SISO_SWITCH_MIMO2_AB 2 -#define IWL_SISO_SWITCH_MIMO2_AC 3 -#define IWL_SISO_SWITCH_MIMO2_BC 4 -#define IWL_SISO_SWITCH_GI 5 -#define IWL_SISO_SWITCH_MIMO3_ABC 6 - +#define IWL_SISO_SWITCH_MIMO2 2 +#define IWL_SISO_SWITCH_GI 3 /* possible actions when in mimo mode */ #define IWL_MIMO2_SWITCH_ANTENNA1 0 #define IWL_MIMO2_SWITCH_ANTENNA2 1 #define IWL_MIMO2_SWITCH_SISO_A 2 #define IWL_MIMO2_SWITCH_SISO_B 3 -#define IWL_MIMO2_SWITCH_SISO_C 4 -#define IWL_MIMO2_SWITCH_GI 5 -#define IWL_MIMO2_SWITCH_MIMO3_ABC 6 - - -/* possible actions when in mimo3 mode */ -#define IWL_MIMO3_SWITCH_ANTENNA1 0 -#define IWL_MIMO3_SWITCH_ANTENNA2 1 -#define IWL_MIMO3_SWITCH_SISO_A 2 -#define IWL_MIMO3_SWITCH_SISO_B 3 -#define IWL_MIMO3_SWITCH_SISO_C 4 -#define IWL_MIMO3_SWITCH_MIMO2_AB 5 -#define IWL_MIMO3_SWITCH_MIMO2_AC 6 -#define IWL_MIMO3_SWITCH_MIMO2_BC 7 -#define IWL_MIMO3_SWITCH_GI 8 - - -#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI -#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC +#define IWL_MIMO2_SWITCH_GI 4 -/*FIXME:RS:add possible actions for MIMO3*/ +#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_GI #define IWL_ACTION_LIMIT 3 /* # possible actions */ @@ -218,15 +192,13 @@ enum iwl_table_type { LQ_A, LQ_SISO, /* high-throughput types */ LQ_MIMO2, - LQ_MIMO3, LQ_MAX, }; #define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) #define is_siso(tbl) ((tbl) == LQ_SISO) #define is_mimo2(tbl) ((tbl) == LQ_MIMO2) -#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) -#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) +#define is_mimo(tbl) is_mimo2(tbl) #define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) #define is_a_band(tbl) ((tbl) == LQ_A) #define is_g_and(tbl) ((tbl) == LQ_G) @@ -298,7 +270,6 @@ struct iwl_lq_sta { u16 active_legacy_rate; u16 active_siso_rate; u16 active_mimo2_rate; - u16 active_mimo3_rate; s8 max_rate_idx; /* Max rate set by user */ u8 missed_rate_counter; -- cgit v0.10.2 From d8eb741eb374804e864751c7f3919ae50321d831 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Fri, 9 Aug 2013 18:58:32 +0200 Subject: mac80211: ibss - do not scan if not needed when creating an IBSS In some cases mac80211 will scan before creating an IBSS even if bssid and frequency have been forced by the user. This is not needed and leads only to a delay in the IBSS establishment phase. Immediately create the cell if both bssid and frequency (and fixed_freq is set) have been specified. Signed-off-by: Antonio Quartulli Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index e08387c..79e294e 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -891,6 +891,17 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) return; } + /* if a fixed bssid and a fixed freq have been provided create the IBSS + * directly and do not waste time scanning + */ + if (ifibss->fixed_bssid && ifibss->fixed_channel) { + sdata_info(sdata, "Created IBSS using preconfigured BSSID %pM\n", + bssid); + ieee80211_sta_create_ibss(sdata); + return; + } + + ibss_dbg(sdata, "sta_find_ibss: did not try to join ibss\n"); /* Selected IBSS not found in current scan results - try to scan */ -- cgit v0.10.2 From 40dac370efea8d5f2e4de61badf377637053fda7 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Mon, 24 Jun 2013 12:02:28 +0200 Subject: NFC: Fix missing static declarations This patch fixes 3 sparse warnings: nfcsim.c:63:25: sparse: symbol 'wq' was not declared. nfcsim.c:484:12: sparse: symbol 'nfcsim_init' was not declared. nfcsim.c:525:13: sparse: symbol 'nfcsim_exit' was not declared. Reported-by: Fengguang Wu Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/nfcsim.c b/drivers/nfc/nfcsim.c index c5c30fb..9a53f13 100644 --- a/drivers/nfc/nfcsim.c +++ b/drivers/nfc/nfcsim.c @@ -60,7 +60,7 @@ struct nfcsim { static struct nfcsim *dev0; static struct nfcsim *dev1; -struct workqueue_struct *wq; +static struct workqueue_struct *wq; static void nfcsim_cleanup_dev(struct nfcsim *dev, u8 shutdown) { @@ -481,7 +481,7 @@ static void nfcsim_free_device(struct nfcsim *dev) kfree(dev); } -int __init nfcsim_init(void) +static int __init nfcsim_init(void) { int rc; @@ -522,7 +522,7 @@ exit: return rc; } -void __exit nfcsim_exit(void) +static void __exit nfcsim_exit(void) { nfcsim_cleanup_dev(dev0, 1); nfcsim_cleanup_dev(dev1, 1); -- cgit v0.10.2 From 0293ba201ddd9256552704efef5c2bbf18a78574 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 24 Jun 2013 14:39:35 +0200 Subject: MAINTAINERS: Change the NFC subsystem status to Supported Signed-off-by: Samuel Ortiz diff --git a/MAINTAINERS b/MAINTAINERS index 1ea2d04..2116b9a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5791,7 +5791,7 @@ M: Aloisio Almeida Jr M: Samuel Ortiz L: linux-wireless@vger.kernel.org L: linux-nfc@lists.01.org (moderated for non-subscribers) -S: Maintained +S: Supported F: net/nfc/ F: include/net/nfc/ F: include/uapi/linux/nfc.h -- cgit v0.10.2 From 1972b5b3a66f1b6a9df04cc91faf401354919262 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 25 Jun 2013 12:42:54 +0200 Subject: NFC: Document secure element addition/removal netlink events Signed-off-by: Samuel Ortiz diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 8137dd8..40ada98 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -71,6 +71,11 @@ * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element. * @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform * that some firmware was loaded + * @NFC_EVENT_SE_ADDED: Event emitted when a new secure element is discovered. + * This typically will be sent whenever a new NFC controller with either + * an embedded SE or an UICC one connected to it through SWP. + * @NFC_EVENT_SE_REMOVED: Event emitted when a secure element is removed from + * the system, as a consequence of e.g. an NFC controller being unplugged. */ enum nfc_commands { NFC_CMD_UNSPEC, -- cgit v0.10.2 From 91a32269e31282405db405b9ec9ce1a30568e4b0 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 25 Jun 2013 16:22:08 +0200 Subject: NFC: Define secure element connectivity and transaction events The SE_CONNECTIVITY event is for an SE to request connection to e.g. a modem. The SE_TRANSACTION one is sent when an application running on a specific SE wants to notify the host CPU about the end of a transaction. Those events respectively map to the EVT_CONNECTIVITY and the EVT_TRANSACTION HCI events. Signed-off-by: Samuel Ortiz diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 40ada98..539d604 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -76,6 +76,14 @@ * an embedded SE or an UICC one connected to it through SWP. * @NFC_EVENT_SE_REMOVED: Event emitted when a secure element is removed from * the system, as a consequence of e.g. an NFC controller being unplugged. + * @NFC_EVENT_SE_CONNECTIVITY: This event is emitted whenever a secure element + * is requesting connectivity access. For example a UICC SE may need to + * talk with a sleeping modem and will notify this need by sending this + * event. It is then up to userspace to decide if it will wake the modem + * up or not. + * @NFC_EVENT_SE_TRANSACTION: This event is sent when an application running on + * a specific SE notifies us about the end of a transaction. The parameter + * for this event is the application ID (AID). */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -102,6 +110,8 @@ enum nfc_commands { NFC_CMD_FW_DOWNLOAD, NFC_EVENT_SE_ADDED, NFC_EVENT_SE_REMOVED, + NFC_EVENT_SE_CONNECTIVITY, + NFC_EVENT_SE_TRANSACTION, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -159,6 +169,7 @@ enum nfc_attrs { NFC_ATTR_FIRMWARE_NAME, NFC_ATTR_SE_INDEX, NFC_ATTR_SE_TYPE, + NFC_ATTR_SE_AID, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; -- cgit v0.10.2 From f1abed171fa565448d229afb814f66ab6d104d44 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 26 Jun 2013 17:53:09 +0200 Subject: NFC: pn533: Fix hardware busy loop when establishing the LLCP link By using the standard setting for the regular pn533 dongles, we no longer wait for ever for an ATR_RES. Without this, a failing ATR_REQ will put the hardware into a busy loop, constantly waiting for an ATR_RES. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index daf92ac..3c169e3 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -2605,17 +2605,6 @@ static int pn533_setup(struct pn533 *dev) switch (dev->device_type) { case PN533_DEVICE_STD: - max_retries.mx_rty_atr = PN533_CONFIG_MAX_RETRIES_ENDLESS; - max_retries.mx_rty_psl = 2; - max_retries.mx_rty_passive_act = - PN533_CONFIG_MAX_RETRIES_NO_RETRY; - - timing.rfu = PN533_CONFIG_TIMING_102; - timing.atr_res_timeout = PN533_CONFIG_TIMING_204; - timing.dep_timeout = PN533_CONFIG_TIMING_409; - - break; - case PN533_DEVICE_PASORI: case PN533_DEVICE_ACR122U: max_retries.mx_rty_atr = 0x2; -- cgit v0.10.2 From 17e9d9d437d1bb52077e562fae9457236dbaa76f Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 26 Jun 2013 18:16:21 +0200 Subject: NFC: pn533: Fix the pn533 polling loop By turning the radio off after each failed polling try, we dramatically improve the pn533 polling loop efficiency. Without this fix, all Android phones running the broadcom NFC stack are almost never detected. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 3c169e3..fe9d4b7 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -359,6 +359,7 @@ struct pn533 { struct work_struct poll_work; struct work_struct mi_work; struct work_struct tg_work; + struct work_struct rf_work; struct list_head cmd_queue; struct pn533_cmd *cmd; @@ -1660,6 +1661,53 @@ static void pn533_listen_mode_timer(unsigned long data) queue_work(dev->wq, &dev->poll_work); } +static int pn533_rf_complete(struct pn533 *dev, void *arg, + struct sk_buff *resp) +{ + int rc = 0; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); + + nfc_dev_err(&dev->interface->dev, "%s RF setting error %d", + __func__, rc); + + return rc; + } + + queue_work(dev->wq, &dev->poll_work); + + dev_kfree_skb(resp); + return rc; +} + +static void pn533_wq_rf(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, rf_work); + struct sk_buff *skb; + int rc; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + skb = pn533_alloc_skb(dev, 2); + if (!skb) + return; + + *skb_put(skb, 1) = PN533_CFGITEM_RF_FIELD; + *skb_put(skb, 1) = 0; + + rc = pn533_send_cmd_async(dev, PN533_CMD_RF_CONFIGURATION, skb, + pn533_rf_complete, NULL); + if (rc < 0) { + dev_kfree_skb(skb); + nfc_dev_err(&dev->interface->dev, "RF setting error %d", rc); + } + + return; +} + static int pn533_poll_complete(struct pn533 *dev, void *arg, struct sk_buff *resp) { @@ -1705,7 +1753,8 @@ static int pn533_poll_complete(struct pn533 *dev, void *arg, } pn533_poll_next_mod(dev); - queue_work(dev->wq, &dev->poll_work); + /* Not target found, turn radio off */ + queue_work(dev->wq, &dev->rf_work); done: dev_kfree_skb(resp); @@ -2051,6 +2100,7 @@ static int pn533_mod_to_baud(struct pn533 *dev) } } +static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf); #define PASSIVE_DATA_LEN 5 static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, u8 comm_mode, u8 *gb, size_t gb_len) @@ -2127,6 +2177,8 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, *arg = !comm_mode; + pn533_rf_field(dev->nfc_dev, 0); + rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb, pn533_in_dep_link_up_complete, arg); @@ -2721,6 +2773,7 @@ static int pn533_probe(struct usb_interface *interface, INIT_WORK(&dev->mi_work, pn533_wq_mi_recv); INIT_WORK(&dev->tg_work, pn533_wq_tg_get_data); INIT_WORK(&dev->poll_work, pn533_wq_poll); + INIT_WORK(&dev->rf_work, pn533_wq_rf); dev->wq = alloc_ordered_workqueue("pn533", 0); if (dev->wq == NULL) goto error; -- cgit v0.10.2 From a94e10f7d7ce8e22d3d1cfebdfb7fe0451714799 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 28 Jun 2013 15:43:19 +0200 Subject: NFC: pn533: Request System code from SENSF_REQ Some devices are getting confused when not being asked for their system code with type F. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index fe9d4b7..fa12f59 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -257,7 +257,7 @@ static const struct pn533_poll_modulations poll_mod[] = { .initiator_data.felica = { .opcode = PN533_FELICA_OPC_SENSF_REQ, .sc = PN533_FELICA_SENSF_SC_ALL, - .rc = PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE, + .rc = PN533_FELICA_SENSF_RC_SYSTEM_CODE, .tsn = 0x03, }, }, @@ -270,7 +270,7 @@ static const struct pn533_poll_modulations poll_mod[] = { .initiator_data.felica = { .opcode = PN533_FELICA_OPC_SENSF_REQ, .sc = PN533_FELICA_SENSF_SC_ALL, - .rc = PN533_FELICA_SENSF_RC_NO_SYSTEM_CODE, + .rc = PN533_FELICA_SENSF_RC_SYSTEM_CODE, .tsn = 0x03, }, }, -- cgit v0.10.2 From 5eef4845619b88957349415b7b1498e00220fa2b Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 1 Jul 2013 10:58:12 +0200 Subject: NFC: pn533: Unconditionaly select the highest p2p bit rate p2p devices must be able to support 424 kbps, so we should always select that bitrate in initiator mode. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index fa12f59..ff3e19d 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -2086,20 +2086,6 @@ error: return rc; } -static int pn533_mod_to_baud(struct pn533 *dev) -{ - switch (dev->poll_mod_curr) { - case PN533_POLL_MOD_106KBPS_A: - return 0; - case PN533_POLL_MOD_212KBPS_FELICA: - return 1; - case PN533_POLL_MOD_424KBPS_FELICA: - return 2; - default: - return -EINVAL; - } -} - static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf); #define PASSIVE_DATA_LEN 5 static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, @@ -2107,8 +2093,8 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, { struct pn533 *dev = nfc_get_drvdata(nfc_dev); struct sk_buff *skb; - int rc, baud, skb_len; - u8 *next, *arg; + int rc, skb_len; + u8 *next, *arg, nfcid3[NFC_NFCID3_MAXSIZE]; u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3}; @@ -2126,41 +2112,39 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, return -EBUSY; } - baud = pn533_mod_to_baud(dev); - if (baud < 0) { - nfc_dev_err(&dev->interface->dev, - "Invalid curr modulation %d", dev->poll_mod_curr); - return baud; - } - skb_len = 3 + gb_len; /* ActPass + BR + Next */ - if (comm_mode == NFC_COMM_PASSIVE) - skb_len += PASSIVE_DATA_LEN; + skb_len += PASSIVE_DATA_LEN; - if (target && target->nfcid2_len) - skb_len += NFC_NFCID3_MAXSIZE; + /* NFCID3 */ + skb_len += NFC_NFCID3_MAXSIZE; + if (target && !target->nfcid2_len) { + nfcid3[0] = 0x1; + nfcid3[1] = 0xfe; + get_random_bytes(nfcid3 + 2, 6); + } skb = pn533_alloc_skb(dev, skb_len); if (!skb) return -ENOMEM; *skb_put(skb, 1) = !comm_mode; /* ActPass */ - *skb_put(skb, 1) = baud; /* Baud rate */ + *skb_put(skb, 1) = 0x02; /* 424 kbps */ next = skb_put(skb, 1); /* Next */ *next = 0; - if (comm_mode == NFC_COMM_PASSIVE && baud > 0) { - memcpy(skb_put(skb, PASSIVE_DATA_LEN), passive_data, - PASSIVE_DATA_LEN); - *next |= 1; - } + /* Copy passive data */ + memcpy(skb_put(skb, PASSIVE_DATA_LEN), passive_data, PASSIVE_DATA_LEN); + *next |= 1; - if (target && target->nfcid2_len) { + /* Copy NFCID3 (which is NFCID2 from SENSF_RES) */ + if (target && target->nfcid2_len) memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), target->nfcid2, target->nfcid2_len); - *next |= 2; - } + else + memcpy(skb_put(skb, NFC_NFCID3_MAXSIZE), nfcid3, + NFC_NFCID3_MAXSIZE); + *next |= 2; if (gb != NULL && gb_len > 0) { memcpy(skb_put(skb, gb_len), gb, gb_len); -- cgit v0.10.2 From 3a8eab39ac53f2d35d663634e16b486e8a5a65a9 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 1 Jul 2013 17:26:58 +0200 Subject: NFC: pn533: Enable AUTO RFCA The AUTO RFCA bit forbids the pn533 chipset to turn its radio on whenever an external field is present. Without this bit set, some devices seems to get over flood by the pn533 rf field and thus become hardly detectable. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index ff3e19d..125d995 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -168,8 +168,9 @@ struct pn533_fw_version { #define PN533_CFGITEM_MAX_RETRIES 0x05 #define PN533_CFGITEM_PASORI 0x82 -#define PN533_CFGITEM_RF_FIELD_ON 0x1 -#define PN533_CFGITEM_RF_FIELD_OFF 0x0 +#define PN533_CFGITEM_RF_FIELD_AUTO_RFCA 0x2 +#define PN533_CFGITEM_RF_FIELD_ON 0x1 +#define PN533_CFGITEM_RF_FIELD_OFF 0x0 #define PN533_CONFIG_TIMING_102 0xb #define PN533_CONFIG_TIMING_204 0xc @@ -1696,7 +1697,7 @@ static void pn533_wq_rf(struct work_struct *work) return; *skb_put(skb, 1) = PN533_CFGITEM_RF_FIELD; - *skb_put(skb, 1) = 0; + *skb_put(skb, 1) = PN533_CFGITEM_RF_FIELD_AUTO_RFCA; rc = pn533_send_cmd_async(dev, PN533_CMD_RF_CONFIGURATION, skb, pn533_rf_complete, NULL); @@ -2598,6 +2599,8 @@ static int pn533_rf_field(struct nfc_dev *nfc_dev, u8 rf) u8 rf_field = !!rf; int rc; + rf_field |= PN533_CFGITEM_RF_FIELD_AUTO_RFCA; + rc = pn533_set_configuration(dev, PN533_CFGITEM_RF_FIELD, (u8 *)&rf_field, 1); if (rc) { -- cgit v0.10.2 From 1575b9d8668f4ecf2648a08751313c826fb6a6e9 Mon Sep 17 00:00:00 2001 From: Olivier Guiter Date: Thu, 13 Jun 2013 15:43:27 +0200 Subject: NFC: pn533: Add extended information frame decoding support Extended Information frames are slightly different from standard frames as they can (theorically) handle datas up tu 64kB. PN533 firmware only supports packet data up to 265 (incl. TFI byte) This kind of frame are used when the pn533 wants to exchange more than 255 bytes, and this patch handles the reception of such frames. Signed-off-by: Olivier Guiter Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 125d995..ae0fa9e 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -84,11 +84,17 @@ MODULE_DEVICE_TABLE(usb, pn533_table); /* How much time we spend listening for initiators */ #define PN533_LISTEN_TIME 2 -/* Standard pn533 frame definitions */ +/* Standard pn533 frame definitions (standard and extended)*/ #define PN533_STD_FRAME_HEADER_LEN (sizeof(struct pn533_std_frame) \ + 2) /* data[0] TFI, data[1] CC */ #define PN533_STD_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ +#define PN533_EXT_FRAME_HEADER_LEN (sizeof(struct pn533_ext_frame) \ + + 2) /* data[0] TFI, data[1] CC */ + +#define PN533_CMD_DATAEXCH_DATA_MAXLEN 262 +#define PN533_CMD_DATAFRAME_MAXLEN 240 /* max data length (send) */ + /* * Max extended frame payload len, excluding TFI and CC * which are already in PN533_FRAME_HEADER_LEN. @@ -99,6 +105,10 @@ MODULE_DEVICE_TABLE(usb, pn533_table); Postamble (1) */ #define PN533_STD_FRAME_CHECKSUM(f) (f->data[f->datalen]) #define PN533_STD_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1]) +/* Half start code (3), LEN (4) should be 0xffff for extended frame */ +#define PN533_STD_IS_EXTENDED(hdr) ((hdr)->datalen == 0xFF \ + && (hdr)->datalen_checksum == 0xFF) +#define PN533_EXT_FRAME_CHECKSUM(f) (f->data[be16_to_cpu(f->datalen)]) /* start of frame */ #define PN533_STD_FRAME_SOF 0x00FF @@ -124,7 +134,7 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_ACR122_RDR_TO_PC_ESCAPE 0x83 /* PN533 Commands */ -#define PN533_STD_FRAME_CMD(f) (f->data[1]) +#define PN533_FRAME_CMD(f) (f->data[1]) #define PN533_CMD_GET_FIRMWARE_VERSION 0x02 #define PN533_CMD_RF_CONFIGURATION 0x32 @@ -406,6 +416,15 @@ struct pn533_std_frame { u8 data[]; } __packed; +struct pn533_ext_frame { /* Extended Information frame */ + u8 preamble; + __be16 start_frame; + __be16 eif_flag; /* fixed to 0xFFFF */ + __be16 datalen; + u8 datalen_checksum; + u8 data[]; +} __packed; + struct pn533_frame_ops { void (*tx_frame_init)(void *frame, u8 cmd_code); void (*tx_frame_finish)(void *frame); @@ -513,7 +532,7 @@ static u8 pn533_acr122_get_cmd_code(void *frame) { struct pn533_acr122_rx_frame *f = frame; - return PN533_STD_FRAME_CMD(f); + return PN533_FRAME_CMD(f); } static struct pn533_frame_ops pn533_acr122_frame_ops = { @@ -532,6 +551,12 @@ static struct pn533_frame_ops pn533_acr122_frame_ops = { .get_cmd_code = pn533_acr122_get_cmd_code, }; +/* The rule: value(high byte) + value(low byte) + checksum = 0 */ +static inline u8 pn533_ext_checksum(u16 value) +{ + return ~(u8)(((value & 0xFF00) >> 8) + (u8)(value & 0xFF)) + 1; +} + /* The rule: value + checksum = 0 */ static inline u8 pn533_std_checksum(u8 value) { @@ -557,7 +582,7 @@ static void pn533_std_tx_frame_init(void *_frame, u8 cmd_code) frame->preamble = 0; frame->start_frame = cpu_to_be16(PN533_STD_FRAME_SOF); PN533_STD_FRAME_IDENTIFIER(frame) = PN533_STD_FRAME_DIR_OUT; - PN533_STD_FRAME_CMD(frame) = cmd_code; + PN533_FRAME_CMD(frame) = cmd_code; frame->datalen = 2; } @@ -583,18 +608,35 @@ static void pn533_std_tx_update_payload_len(void *_frame, int len) static bool pn533_std_rx_frame_is_valid(void *_frame) { u8 checksum; - struct pn533_std_frame *frame = _frame; + struct pn533_std_frame *stdf = _frame; - if (frame->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF)) + if (stdf->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF)) return false; - checksum = pn533_std_checksum(frame->datalen); - if (checksum != frame->datalen_checksum) - return false; + if (likely(!PN533_STD_IS_EXTENDED(stdf))) { + /* Standard frame code */ - checksum = pn533_std_data_checksum(frame->data, frame->datalen); - if (checksum != PN533_STD_FRAME_CHECKSUM(frame)) - return false; + checksum = pn533_std_checksum(stdf->datalen); + if (checksum != stdf->datalen_checksum) + return false; + + checksum = pn533_std_data_checksum(stdf->data, stdf->datalen); + if (checksum != PN533_STD_FRAME_CHECKSUM(stdf)) + return false; + } else { + /* Extended */ + struct pn533_ext_frame *eif = _frame; + + checksum = pn533_ext_checksum(be16_to_cpu(eif->datalen)); + if (checksum != eif->datalen_checksum) + return false; + + /* check data checksum */ + checksum = pn533_std_data_checksum(eif->data, + be16_to_cpu(eif->datalen)); + if (checksum != PN533_EXT_FRAME_CHECKSUM(eif)) + return false; + } return true; } @@ -614,6 +656,14 @@ static inline int pn533_std_rx_frame_size(void *frame) { struct pn533_std_frame *f = frame; + /* check for Extended Information frame */ + if (PN533_STD_IS_EXTENDED(f)) { + struct pn533_ext_frame *eif = frame; + + return sizeof(struct pn533_ext_frame) + + be16_to_cpu(eif->datalen) + PN533_STD_FRAME_TAIL_LEN; + } + return sizeof(struct pn533_std_frame) + f->datalen + PN533_STD_FRAME_TAIL_LEN; } @@ -621,8 +671,12 @@ static inline int pn533_std_rx_frame_size(void *frame) static u8 pn533_std_get_cmd_code(void *frame) { struct pn533_std_frame *f = frame; + struct pn533_ext_frame *eif = frame; - return PN533_STD_FRAME_CMD(f); + if (PN533_STD_IS_EXTENDED(f)) + return PN533_FRAME_CMD(eif); + else + return PN533_FRAME_CMD(f); } static struct pn533_frame_ops pn533_std_frame_ops = { @@ -690,6 +744,11 @@ static void pn533_recv_response(struct urb *urb) goto sched_wq; } + if (PN533_STD_IS_EXTENDED((struct pn533_std_frame *)in_frame)) + dev->ops->rx_header_len = PN533_EXT_FRAME_HEADER_LEN; + else + dev->ops->rx_header_len = PN533_STD_FRAME_HEADER_LEN; + sched_wq: queue_work(dev->wq, &dev->cmd_complete_work); } -- cgit v0.10.2 From 963a82e07d4e1f95fc423d53912ac0a7fe643b1c Mon Sep 17 00:00:00 2001 From: Olivier Guiter Date: Thu, 13 Jun 2013 13:43:28 +0000 Subject: NFC: pn533: Split large Tx frames in chunks On sending large frames (size > 262), we split it in multiple chunks and send them asynchronously with MI bit. Signed-off-by: Olivier Guiter Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index ae0fa9e..f06ef7c 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -363,12 +363,14 @@ struct pn533 { struct urb *in_urb; struct sk_buff_head resp_q; + struct sk_buff_head fragment_skb; struct workqueue_struct *wq; struct work_struct cmd_work; struct work_struct cmd_complete_work; struct work_struct poll_work; - struct work_struct mi_work; + struct work_struct mi_rx_work; + struct work_struct mi_tx_work; struct work_struct tg_work; struct work_struct rf_work; @@ -378,6 +380,7 @@ struct pn533 { struct mutex cmd_lock; /* protects cmd queue */ void *cmd_complete_mi_arg; + void *cmd_complete_dep_arg; struct pn533_poll_modulations *poll_mod_active[PN533_POLL_MOD_MAX + 1]; u8 poll_mod_count; @@ -2328,7 +2331,15 @@ static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, if (mi) { dev->cmd_complete_mi_arg = arg; - queue_work(dev->wq, &dev->mi_work); + queue_work(dev->wq, &dev->mi_rx_work); + return -EINPROGRESS; + } + + /* Prepare for the next round */ + if (skb_queue_len(&dev->fragment_skb) > 0) { + dev->cmd_complete_dep_arg = arg; + queue_work(dev->wq, &dev->mi_tx_work); + return -EINPROGRESS; } @@ -2349,6 +2360,50 @@ _error: return rc; } +/* Split the Tx skb into small chunks */ +static int pn533_fill_fragment_skbs(struct pn533 *dev, struct sk_buff *skb) +{ + struct sk_buff *frag; + int frag_size; + + do { + /* Remaining size */ + if (skb->len > PN533_CMD_DATAFRAME_MAXLEN) + frag_size = PN533_CMD_DATAFRAME_MAXLEN; + else + frag_size = skb->len; + + /* Allocate and reserve */ + frag = pn533_alloc_skb(dev, frag_size); + if (!frag) { + skb_queue_purge(&dev->fragment_skb); + break; + } + + /* Reserve the TG/MI byte */ + skb_reserve(frag, 1); + + /* MI + TG */ + if (frag_size == PN533_CMD_DATAFRAME_MAXLEN) + *skb_push(frag, sizeof(u8)) = (PN533_CMD_MI_MASK | 1); + else + *skb_push(frag, sizeof(u8)) = 1; /* TG */ + + memcpy(skb_put(frag, frag_size), skb->data, frag_size); + + /* Reduce the size of incoming buffer */ + skb_pull(skb, frag_size); + + /* Add this to skb_queue */ + skb_queue_tail(&dev->fragment_skb, frag); + + } while (skb->len > 0); + + dev_kfree_skb(skb); + + return skb_queue_len(&dev->fragment_skb); +} + static int pn533_transceive(struct nfc_dev *nfc_dev, struct nfc_target *target, struct sk_buff *skb, data_exchange_cb_t cb, void *cb_context) @@ -2359,15 +2414,6 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { - /* TODO: Implement support to multi-part data exchange */ - nfc_dev_err(&dev->interface->dev, - "Data length greater than the max allowed: %d", - PN533_CMD_DATAEXCH_DATA_MAXLEN); - rc = -ENOSYS; - goto error; - } - if (!dev->tgt_active_prot) { nfc_dev_err(&dev->interface->dev, "Can't exchange data if there is no active target"); @@ -2395,7 +2441,20 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, break; } default: - *skb_push(skb, sizeof(u8)) = 1; /*TG*/ + /* jumbo frame ? */ + if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { + rc = pn533_fill_fragment_skbs(dev, skb); + if (rc <= 0) + goto error; + + skb = skb_dequeue(&dev->fragment_skb); + if (!skb) { + rc = -EIO; + goto error; + } + } else { + *skb_push(skb, sizeof(u8)) = 1; /* TG */ + } rc = pn533_send_data_async(dev, PN533_CMD_IN_DATA_EXCHANGE, skb, pn533_data_exchange_complete, @@ -2466,7 +2525,7 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) static void pn533_wq_mi_recv(struct work_struct *work) { - struct pn533 *dev = container_of(work, struct pn533, mi_work); + struct pn533 *dev = container_of(work, struct pn533, mi_rx_work); struct sk_buff *skb; int rc; @@ -2514,6 +2573,61 @@ error: queue_work(dev->wq, &dev->cmd_work); } +static void pn533_wq_mi_send(struct work_struct *work) +{ + struct pn533 *dev = container_of(work, struct pn533, mi_tx_work); + struct sk_buff *skb; + int rc; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + /* Grab the first skb in the queue */ + skb = skb_dequeue(&dev->fragment_skb); + + if (skb == NULL) { /* No more data */ + /* Reset the queue for future use */ + skb_queue_head_init(&dev->fragment_skb); + goto error; + } + + switch (dev->device_type) { + case PN533_DEVICE_PASORI: + if (dev->tgt_active_prot != NFC_PROTO_FELICA) { + rc = -EIO; + break; + } + + rc = pn533_send_cmd_direct_async(dev, PN533_CMD_IN_COMM_THRU, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_dep_arg); + + break; + + default: + /* Still some fragments? */ + rc = pn533_send_cmd_direct_async(dev,PN533_CMD_IN_DATA_EXCHANGE, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_dep_arg); + + break; + } + + if (rc == 0) /* success */ + return; + + nfc_dev_err(&dev->interface->dev, + "Error %d when trying to perform data_exchange", rc); + + dev_kfree_skb(skb); + kfree(dev->cmd_complete_dep_arg); + +error: + pn533_send_ack(dev, GFP_KERNEL); + queue_work(dev->wq, &dev->cmd_work); +} + static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, u8 cfgdata_len) { @@ -2816,7 +2930,8 @@ static int pn533_probe(struct usb_interface *interface, INIT_WORK(&dev->cmd_work, pn533_wq_cmd); INIT_WORK(&dev->cmd_complete_work, pn533_wq_cmd_complete); - INIT_WORK(&dev->mi_work, pn533_wq_mi_recv); + INIT_WORK(&dev->mi_rx_work, pn533_wq_mi_recv); + INIT_WORK(&dev->mi_tx_work, pn533_wq_mi_send); INIT_WORK(&dev->tg_work, pn533_wq_tg_get_data); INIT_WORK(&dev->poll_work, pn533_wq_poll); INIT_WORK(&dev->rf_work, pn533_wq_rf); @@ -2829,6 +2944,7 @@ static int pn533_probe(struct usb_interface *interface, dev->listen_timer.function = pn533_listen_mode_timer; skb_queue_head_init(&dev->resp_q); + skb_queue_head_init(&dev->fragment_skb); INIT_LIST_HEAD(&dev->cmd_queue); -- cgit v0.10.2 From 56a63c82cf82eb491af05759d9e9f9b97ca36bc2 Mon Sep 17 00:00:00 2001 From: Olivier Guiter Date: Thu, 13 Jun 2013 13:43:29 +0000 Subject: NFC: pn533: Store the correct frame size (normal vs ext) The extended information frame are sent by PN533 to exchange frames larger than 255 bytes. These extended frame are very close from the standard ones except for the header size length. On each incoming frame, we set the correct header length, and we do that only for the standard pn533 chipsets as the acr122 does not seem to support extended frames properly. Signed-off-by: Olivier Guiter Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index f06ef7c..2f1ebbd 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -435,7 +435,7 @@ struct pn533_frame_ops { int tx_header_len; int tx_tail_len; - bool (*rx_is_frame_valid)(void *frame); + bool (*rx_is_frame_valid)(void *frame, struct pn533 *dev); int (*rx_frame_size)(void *frame); int rx_header_len; int rx_tail_len; @@ -510,7 +510,7 @@ static void pn533_acr122_tx_update_payload_len(void *_frame, int len) frame->datalen += len; } -static bool pn533_acr122_is_rx_frame_valid(void *_frame) +static bool pn533_acr122_is_rx_frame_valid(void *_frame, struct pn533 *dev) { struct pn533_acr122_rx_frame *frame = _frame; @@ -608,7 +608,7 @@ static void pn533_std_tx_update_payload_len(void *_frame, int len) frame->datalen += len; } -static bool pn533_std_rx_frame_is_valid(void *_frame) +static bool pn533_std_rx_frame_is_valid(void *_frame, struct pn533 *dev) { u8 checksum; struct pn533_std_frame *stdf = _frame; @@ -618,6 +618,7 @@ static bool pn533_std_rx_frame_is_valid(void *_frame) if (likely(!PN533_STD_IS_EXTENDED(stdf))) { /* Standard frame code */ + dev->ops->rx_header_len = PN533_STD_FRAME_HEADER_LEN; checksum = pn533_std_checksum(stdf->datalen); if (checksum != stdf->datalen_checksum) @@ -630,6 +631,8 @@ static bool pn533_std_rx_frame_is_valid(void *_frame) /* Extended */ struct pn533_ext_frame *eif = _frame; + dev->ops->rx_header_len = PN533_EXT_FRAME_HEADER_LEN; + checksum = pn533_ext_checksum(be16_to_cpu(eif->datalen)); if (checksum != eif->datalen_checksum) return false; @@ -734,7 +737,7 @@ static void pn533_recv_response(struct urb *urb) print_hex_dump_debug("PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, in_frame, dev->ops->rx_frame_size(in_frame), false); - if (!dev->ops->rx_is_frame_valid(in_frame)) { + if (!dev->ops->rx_is_frame_valid(in_frame, dev)) { nfc_dev_err(&dev->interface->dev, "Received an invalid frame"); cmd->status = -EIO; goto sched_wq; @@ -747,11 +750,6 @@ static void pn533_recv_response(struct urb *urb) goto sched_wq; } - if (PN533_STD_IS_EXTENDED((struct pn533_std_frame *)in_frame)) - dev->ops->rx_header_len = PN533_EXT_FRAME_HEADER_LEN; - else - dev->ops->rx_header_len = PN533_STD_FRAME_HEADER_LEN; - sched_wq: queue_work(dev->wq, &dev->cmd_complete_work); } -- cgit v0.10.2 From 369f4d503ac12363f5d11b91f849377875d57598 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 24 Jul 2013 14:49:22 +0200 Subject: NFC: Fix SE discovery failure warning condition This is a typo coming from the initial implementation. se_discover fails when it returns something different than zero and we should only display a warning in that case. Signed-off-by: Samuel Ortiz diff --git a/net/nfc/core.c b/net/nfc/core.c index 1d074dd..aad7f8f 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -129,7 +129,7 @@ int nfc_dev_up(struct nfc_dev *dev) /* We have to enable the device before discovering SEs */ if (dev->ops->discover_se) { rc = dev->ops->discover_se(dev); - if (!rc) + if (rc) pr_warn("SE discovery failed\n"); } -- cgit v0.10.2 From ac22ac466a659f1b2e02a2e2ee23fc5c42da2c95 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 24 Jul 2013 18:10:50 +0200 Subject: NFC: Add a GET_SE netlink API In order to fetch the discovered secure elements from an NFC controller, we need to send a netlink command that will dump the list of available SEs from NFC. Signed-off-by: Samuel Ortiz diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 539d604..029921b 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -84,6 +84,7 @@ * @NFC_EVENT_SE_TRANSACTION: This event is sent when an application running on * a specific SE notifies us about the end of a transaction. The parameter * for this event is the application ID (AID). + * @NFC_CMD_GET_SE: Dump all discovered secure elements from an NFC controller. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -112,6 +113,7 @@ enum nfc_commands { NFC_EVENT_SE_REMOVED, NFC_EVENT_SE_CONNECTIVITY, NFC_EVENT_SE_TRANSACTION, + NFC_CMD_GET_SE, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c index f16fd59..3b08ef9 100644 --- a/net/nfc/netlink.c +++ b/net/nfc/netlink.c @@ -1191,6 +1191,91 @@ static int nfc_genl_disable_se(struct sk_buff *skb, struct genl_info *info) return rc; } +static int nfc_genl_send_se(struct sk_buff *msg, struct nfc_dev *dev, + u32 portid, u32 seq, + struct netlink_callback *cb, + int flags) +{ + void *hdr; + struct nfc_se *se, *n; + + list_for_each_entry_safe(se, n, &dev->secure_elements, list) { + hdr = genlmsg_put(msg, portid, seq, &nfc_genl_family, flags, + NFC_CMD_GET_SE); + if (!hdr) + goto nla_put_failure; + + if (cb) + genl_dump_check_consistent(cb, hdr, &nfc_genl_family); + + if (nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) || + nla_put_u32(msg, NFC_ATTR_SE_INDEX, se->idx) || + nla_put_u8(msg, NFC_ATTR_SE_TYPE, se->type)) + goto nla_put_failure; + + if (genlmsg_end(msg, hdr) < 0) + goto nla_put_failure; + } + + return 0; + +nla_put_failure: + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; +} + +static int nfc_genl_dump_ses(struct sk_buff *skb, + struct netlink_callback *cb) +{ + struct class_dev_iter *iter = (struct class_dev_iter *) cb->args[0]; + struct nfc_dev *dev = (struct nfc_dev *) cb->args[1]; + bool first_call = false; + + if (!iter) { + first_call = true; + iter = kmalloc(sizeof(struct class_dev_iter), GFP_KERNEL); + if (!iter) + return -ENOMEM; + cb->args[0] = (long) iter; + } + + mutex_lock(&nfc_devlist_mutex); + + cb->seq = nfc_devlist_generation; + + if (first_call) { + nfc_device_iter_init(iter); + dev = nfc_device_iter_next(iter); + } + + while (dev) { + int rc; + + rc = nfc_genl_send_se(skb, dev, NETLINK_CB(cb->skb).portid, + cb->nlh->nlmsg_seq, cb, NLM_F_MULTI); + if (rc < 0) + break; + + dev = nfc_device_iter_next(iter); + } + + mutex_unlock(&nfc_devlist_mutex); + + cb->args[1] = (long) dev; + + return skb->len; +} + +static int nfc_genl_dump_ses_done(struct netlink_callback *cb) +{ + struct class_dev_iter *iter = (struct class_dev_iter *) cb->args[0]; + + nfc_device_iter_exit(iter); + kfree(iter); + + return 0; +} + static struct genl_ops nfc_genl_ops[] = { { .cmd = NFC_CMD_GET_DEVICE, @@ -1265,6 +1350,12 @@ static struct genl_ops nfc_genl_ops[] = { .doit = nfc_genl_disable_se, .policy = nfc_genl_policy, }, + { + .cmd = NFC_CMD_GET_SE, + .dumpit = nfc_genl_dump_ses, + .done = nfc_genl_dump_ses_done, + .policy = nfc_genl_policy, + }, }; -- cgit v0.10.2 From 46f793b0413cfb234ca4faf7e598f24967e1fd3b Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 3 Jul 2013 14:50:36 +0200 Subject: NFC: pn533: Add delay between each poll frame It seems that some pn533 firmwares go belly up when being asked to send poll frames too frequently. Adding a 10ms delay between each of them calm the chip down and prevent it from crashing. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 2f1ebbd..9f3868b 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -83,6 +83,8 @@ MODULE_DEVICE_TABLE(usb, pn533_table); /* How much time we spend listening for initiators */ #define PN533_LISTEN_TIME 2 +/* Delay between each poll frame (ms) */ +#define PN533_POLL_INTERVAL 10 /* Standard pn533 frame definitions (standard and extended)*/ #define PN533_STD_FRAME_HEADER_LEN (sizeof(struct pn533_std_frame) \ @@ -368,7 +370,7 @@ struct pn533 { struct workqueue_struct *wq; struct work_struct cmd_work; struct work_struct cmd_complete_work; - struct work_struct poll_work; + struct delayed_work poll_work; struct work_struct mi_rx_work; struct work_struct mi_tx_work; struct work_struct tg_work; @@ -1719,7 +1721,8 @@ static void pn533_listen_mode_timer(unsigned long data) pn533_poll_next_mod(dev); - queue_work(dev->wq, &dev->poll_work); + queue_delayed_work(dev->wq, &dev->poll_work, + msecs_to_jiffies(PN533_POLL_INTERVAL)); } static int pn533_rf_complete(struct pn533 *dev, void *arg, @@ -1738,7 +1741,8 @@ static int pn533_rf_complete(struct pn533 *dev, void *arg, return rc; } - queue_work(dev->wq, &dev->poll_work); + queue_delayed_work(dev->wq, &dev->poll_work, + msecs_to_jiffies(PN533_POLL_INTERVAL)); dev_kfree_skb(resp); return rc; @@ -1880,7 +1884,7 @@ static int pn533_send_poll_frame(struct pn533 *dev) static void pn533_wq_poll(struct work_struct *work) { - struct pn533 *dev = container_of(work, struct pn533, poll_work); + struct pn533 *dev = container_of(work, struct pn533, poll_work.work); struct pn533_poll_modulations *cur_mod; int rc; @@ -1955,6 +1959,7 @@ static void pn533_stop_poll(struct nfc_dev *nfc_dev) } pn533_abort_cmd(dev, GFP_KERNEL); + flush_delayed_work(&dev->poll_work); pn533_poll_reset_mod_list(dev); } @@ -2931,7 +2936,7 @@ static int pn533_probe(struct usb_interface *interface, INIT_WORK(&dev->mi_rx_work, pn533_wq_mi_recv); INIT_WORK(&dev->mi_tx_work, pn533_wq_mi_send); INIT_WORK(&dev->tg_work, pn533_wq_tg_get_data); - INIT_WORK(&dev->poll_work, pn533_wq_poll); + INIT_DELAYED_WORK(&dev->poll_work, pn533_wq_poll); INIT_WORK(&dev->rf_work, pn533_wq_rf); dev->wq = alloc_ordered_workqueue("pn533", 0); if (dev->wq == NULL) @@ -3044,6 +3049,7 @@ static void pn533_disconnect(struct usb_interface *interface) usb_kill_urb(dev->in_urb); usb_kill_urb(dev->out_urb); + flush_delayed_work(&dev->poll_work); destroy_workqueue(dev->wq); skb_queue_purge(&dev->resp_q); -- cgit v0.10.2 From dfccd0f580445d176acea174175b3e6518cc91f7 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 3 Jul 2013 15:14:17 +0200 Subject: NFC: pn533: Add some polling entropy By not always starting the polling loop from the same modulation, we avoid entering infinite loops where devices exporting 2 targets (on 2 different modulations) get the same target activated over and over. If this target is not readable (e.g. a wallet emulating a tag), we will stay in an error loop for ever. Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 9f3868b..5df730b 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1913,6 +1913,7 @@ static int pn533_start_poll(struct nfc_dev *nfc_dev, u32 im_protocols, u32 tm_protocols) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); + u8 rand_mod; nfc_dev_dbg(&dev->interface->dev, "%s: im protocols 0x%x tm protocols 0x%x", @@ -1936,11 +1937,15 @@ static int pn533_start_poll(struct nfc_dev *nfc_dev, tm_protocols = 0; } - dev->poll_mod_curr = 0; pn533_poll_create_mod_list(dev, im_protocols, tm_protocols); dev->poll_protocols = im_protocols; dev->listen_protocols = tm_protocols; + /* Do not always start polling from the same modulation */ + get_random_bytes(&rand_mod, sizeof(rand_mod)); + rand_mod %= dev->poll_mod_count; + dev->poll_mod_curr = rand_mod; + return pn533_send_poll_frame(dev); } -- cgit v0.10.2 From ef04158e13e827315680cf8449d9af3bd8dc6280 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Fri, 19 Jul 2013 14:56:08 +0200 Subject: NFC: Move nfc_fw_download_done() definition from private to public This API must be called by NFC drivers, and its prototype was incorrectly placed. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 5f286b7..1005955 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -224,6 +224,8 @@ int nfc_set_remote_general_bytes(struct nfc_dev *dev, u8 *gt, u8 gt_len); u8 *nfc_get_local_general_bytes(struct nfc_dev *dev, size_t *gb_len); +int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name); + int nfc_targets_found(struct nfc_dev *dev, struct nfc_target *targets, int ntargets); int nfc_target_lost(struct nfc_dev *dev, u32 target_idx); diff --git a/net/nfc/nfc.h b/net/nfc/nfc.h index 820a785..4e2e5a7 100644 --- a/net/nfc/nfc.h +++ b/net/nfc/nfc.h @@ -126,8 +126,6 @@ static inline void nfc_device_iter_exit(struct class_dev_iter *iter) int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name); int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name); -int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name); - int nfc_dev_up(struct nfc_dev *dev); int nfc_dev_down(struct nfc_dev *dev); -- cgit v0.10.2 From eab10b71a7d62d7cc6db631dba448f1d84df9b53 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Fri, 19 Jul 2013 14:57:13 +0200 Subject: NFC: pn544: i2c: Add firmware download mode power-on support This is in preparation for pn544-i2c firmware download feature, where we need to know if we're in regular or firmware upload mode. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index 8cf64c1..e09c898 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -65,6 +65,7 @@ struct pn544_i2c_phy { unsigned int en_polarity; int powered; + int run_mode; int hard_fault; /* * < 0 if hardware error occured (e.g. i2c err) @@ -122,15 +123,22 @@ out: gpio_set_value(phy->gpio_en, !phy->en_polarity); } +static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode) +{ + gpio_set_value(phy->gpio_fw, run_mode == PN544_FW_MODE ? 1 : 0); + gpio_set_value(phy->gpio_en, phy->en_polarity); + usleep_range(10000, 15000); + + phy->run_mode = run_mode; +} + static int pn544_hci_i2c_enable(void *phy_id) { struct pn544_i2c_phy *phy = phy_id; pr_info(DRIVER_DESC ": %s\n", __func__); - gpio_set_value(phy->gpio_fw, 0); - gpio_set_value(phy->gpio_en, phy->en_polarity); - usleep_range(10000, 15000); + pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE); phy->powered = 1; diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index 0d17da7..1d4b38c 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -31,9 +31,6 @@ /* Timing restrictions (ms) */ #define PN544_HCI_RESETVEN_TIME 30 -#define HCI_MODE 0 -#define FW_MODE 1 - enum pn544_state { PN544_ST_COLD, PN544_ST_FW_READY, diff --git a/drivers/nfc/pn544/pn544.h b/drivers/nfc/pn544/pn544.h index f47c645..d689f0a 100644 --- a/drivers/nfc/pn544/pn544.h +++ b/drivers/nfc/pn544/pn544.h @@ -24,6 +24,9 @@ #define DRIVER_DESC "HCI NFC driver for PN544" +#define PN544_HCI_MODE 0 +#define PN544_FW_MODE 1 + int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, int phy_headroom, int phy_tailroom, int phy_payload, struct nfc_hci_dev **hdev); -- cgit v0.10.2 From 352a5f5fb3ad8f829cfd4248fe6119895bda881f Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Fri, 19 Jul 2013 14:57:55 +0200 Subject: NFC: netlink: Add result of firmware operation to completion event Result is added as an NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS attribute containing the standard errno positive value of the completion result. This event will be sent when the firmare download operation is done and will contain the operation result. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 1005955..f68ee68 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -224,7 +224,8 @@ int nfc_set_remote_general_bytes(struct nfc_dev *dev, u8 *gt, u8 gt_len); u8 *nfc_get_local_general_bytes(struct nfc_dev *dev, size_t *gb_len); -int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name); +int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name, + u32 result); int nfc_targets_found(struct nfc_dev *dev, struct nfc_target *targets, int ntargets); diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 029921b..29bed72 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -146,6 +146,7 @@ enum nfc_commands { * @NFC_ATTR_FIRMWARE_NAME: Free format firmware version * @NFC_ATTR_SE_INDEX: Secure element index * @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED) + * @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -172,6 +173,7 @@ enum nfc_attrs { NFC_ATTR_SE_INDEX, NFC_ATTR_SE_TYPE, NFC_ATTR_SE_AID, + NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; diff --git a/net/nfc/core.c b/net/nfc/core.c index aad7f8f..d252912 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -77,11 +77,19 @@ error: return rc; } -int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name) +/** + * nfc_fw_download_done - inform that a firmware download was completed + * + * @dev: The nfc device to which firmware was downloaded + * @firmware_name: The firmware filename + * @result: The positive value of a standard errno value + */ +int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name, + u32 result) { dev->fw_download_in_progress = false; - return nfc_genl_fw_download_done(dev, firmware_name); + return nfc_genl_fw_download_done(dev, firmware_name, result); } EXPORT_SYMBOL(nfc_fw_download_done); diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c index 3b08ef9..68063b2 100644 --- a/net/nfc/netlink.c +++ b/net/nfc/netlink.c @@ -1114,7 +1114,8 @@ static int nfc_genl_fw_download(struct sk_buff *skb, struct genl_info *info) return rc; } -int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name) +int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name, + u32 result) { struct sk_buff *msg; void *hdr; @@ -1129,6 +1130,7 @@ int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name) goto free_msg; if (nla_put_string(msg, NFC_ATTR_FIRMWARE_NAME, firmware_name) || + nla_put_u32(msg, NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS, result) || nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx)) goto nla_put_failure; diff --git a/net/nfc/nfc.h b/net/nfc/nfc.h index 4e2e5a7..aaf606f 100644 --- a/net/nfc/nfc.h +++ b/net/nfc/nfc.h @@ -124,7 +124,8 @@ static inline void nfc_device_iter_exit(struct class_dev_iter *iter) } int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name); -int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name); +int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name, + u32 result); int nfc_dev_up(struct nfc_dev *dev); -- cgit v0.10.2 From 8bd7fc89958c2f23a5c5d0113ff65713683041ea Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Fri, 19 Jul 2013 14:58:39 +0200 Subject: NFC: pn544: Add firmware operations hci ops The firmware operation callback is passed by the physical layer to the hci driver during probe. All the driver does is to store it and call it when the fw_upload hci ops is invoked. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index e09c898..017dc61 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -428,7 +428,7 @@ static int pn544_hci_i2c_probe(struct i2c_client *client, r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM, - PN544_HCI_I2C_LLC_MAX_PAYLOAD, &phy->hdev); + PN544_HCI_I2C_LLC_MAX_PAYLOAD, NULL, &phy->hdev); if (r < 0) goto err_hci; diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index b5d3d18..ee67de5 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -45,7 +45,7 @@ static int pn544_mei_probe(struct mei_cl_device *device, r = pn544_hci_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, - &phy->hdev); + NULL, &phy->hdev); if (r < 0) { nfc_mei_phy_free(phy); diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index 1d4b38c..078e62f 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -127,6 +127,8 @@ struct pn544_hci_info { int async_cb_type; data_exchange_cb_t async_cb; void *async_cb_context; + + fw_download_t fw_download; }; static int pn544_hci_open(struct nfc_hci_dev *hdev) @@ -779,6 +781,17 @@ exit: return r; } +static int pn544_hci_fw_download(struct nfc_hci_dev *hdev, + const char *firmware_name) +{ + struct pn544_hci_info *info = nfc_hci_get_clientdata(hdev); + + if (info->fw_download == NULL) + return -ENOTSUPP; + + return info->fw_download(info->phy_id, firmware_name); +} + static struct nfc_hci_ops pn544_hci_ops = { .open = pn544_hci_open, .close = pn544_hci_close, @@ -793,11 +806,12 @@ static struct nfc_hci_ops pn544_hci_ops = { .tm_send = pn544_hci_tm_send, .check_presence = pn544_hci_check_presence, .event_received = pn544_hci_event_received, + .fw_download = pn544_hci_fw_download, }; int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, int phy_headroom, int phy_tailroom, int phy_payload, - struct nfc_hci_dev **hdev) + fw_download_t fw_download, struct nfc_hci_dev **hdev) { struct pn544_hci_info *info; u32 protocols; @@ -813,6 +827,7 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, info->phy_ops = phy_ops; info->phy_id = phy_id; + info->fw_download = fw_download; info->state = PN544_ST_COLD; mutex_init(&info->info_lock); diff --git a/drivers/nfc/pn544/pn544.h b/drivers/nfc/pn544/pn544.h index d689f0a..01020e5 100644 --- a/drivers/nfc/pn544/pn544.h +++ b/drivers/nfc/pn544/pn544.h @@ -27,9 +27,11 @@ #define PN544_HCI_MODE 0 #define PN544_FW_MODE 1 +typedef int (*fw_download_t)(void *context, const char *firmware_name); + int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, int phy_headroom, int phy_tailroom, int phy_payload, - struct nfc_hci_dev **hdev); + fw_download_t fw_download, struct nfc_hci_dev **hdev); void pn544_hci_remove(struct nfc_hci_dev *hdev); #endif /* __LOCAL_PN544_H_ */ -- cgit v0.10.2 From 06c660340f1e142b607541ece3520fff3f5d2c39 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Fri, 19 Jul 2013 14:59:45 +0200 Subject: NFC: pn544: i2c: Add firmware download implementation for pn544 The pn544 can enter a firmware update mode where firmware blobs can be pushed through the i2c line and flashed on the target. A special command allows to verify that blobs are correctly flashed and this is what we do for every downloaded firmware blob. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index 017dc61..01e27d4 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -25,11 +25,14 @@ #include #include #include - +#include +#include +#include #include #include #include +#include #include "pn544.h" @@ -55,6 +58,58 @@ MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table); #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c" +#define PN544_FW_CMD_WRITE 0x08 +#define PN544_FW_CMD_CHECK 0x06 + +struct pn544_i2c_fw_frame_write { + u8 cmd; + u16 be_length; + u8 be_dest_addr[3]; + u16 be_datalen; + u8 data[]; +} __packed; + +struct pn544_i2c_fw_frame_check { + u8 cmd; + u16 be_length; + u8 be_start_addr[3]; + u16 be_datalen; + u16 be_crc; +} __packed; + +struct pn544_i2c_fw_frame_response { + u8 status; + u16 be_length; +} __packed; + +struct pn544_i2c_fw_blob { + u32 be_size; + u32 be_destaddr; + u8 data[]; +}; + +#define PN544_FW_CMD_RESULT_TIMEOUT 0x01 +#define PN544_FW_CMD_RESULT_BAD_CRC 0x02 +#define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08 +#define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B +#define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11 +#define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18 +#define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74 + +#define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) + +#define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7 +#define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE +#define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8 +#define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\ + PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\ + PN544_FW_WRITE_BUFFER_MAX_LEN) + +#define FW_WORK_STATE_IDLE 1 +#define FW_WORK_STATE_START 2 +#define FW_WORK_STATE_WAIT_WRITE_ANSWER 3 +#define FW_WORK_STATE_WAIT_CHECK_ANSWER 4 + struct pn544_i2c_phy { struct i2c_client *i2c_dev; struct nfc_hci_dev *hdev; @@ -64,6 +119,16 @@ struct pn544_i2c_phy { unsigned int gpio_fw; unsigned int en_polarity; + struct work_struct fw_work; + int fw_work_state; + char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; + const struct firmware *fw; + u32 fw_blob_dest_addr; + size_t fw_blob_size; + const u8 *fw_blob_data; + size_t fw_written; + int fw_cmd_result; + int powered; int run_mode; @@ -313,6 +378,42 @@ flush: return r; } +static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy) +{ + int r; + struct pn544_i2c_fw_frame_response response; + struct i2c_client *client = phy->i2c_dev; + + r = i2c_master_recv(client, (char *) &response, sizeof(response)); + if (r != sizeof(response)) { + dev_err(&client->dev, "cannot read fw status\n"); + return -EIO; + } + + usleep_range(3000, 6000); + + switch (response.status) { + case 0: + return 0; + case PN544_FW_CMD_RESULT_TIMEOUT: + return -ETIMEDOUT; + case PN544_FW_CMD_RESULT_BAD_CRC: + return -ENODATA; + case PN544_FW_CMD_RESULT_ACCESS_DENIED: + return -EACCES; + case PN544_FW_CMD_RESULT_PROTOCOL_ERROR: + return -EPROTO; + case PN544_FW_CMD_RESULT_INVALID_PARAMETER: + return -EINVAL; + case PN544_FW_CMD_RESULT_INVALID_LENGTH: + return -EBADMSG; + case PN544_FW_CMD_RESULT_WRITE_FAILED: + return -EIO; + default: + return -EIO; + } +} + /* * Reads an shdlc frame from the chip. This is not as straightforward as it * seems. There are cases where we could loose the frame start synchronization. @@ -347,19 +448,23 @@ static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id) if (phy->hard_fault != 0) return IRQ_HANDLED; - r = pn544_hci_i2c_read(phy, &skb); - if (r == -EREMOTEIO) { - phy->hard_fault = r; - - nfc_hci_recv_frame(phy->hdev, NULL); + if (phy->run_mode == PN544_FW_MODE) { + phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy); + schedule_work(&phy->fw_work); + } else { + r = pn544_hci_i2c_read(phy, &skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; - return IRQ_HANDLED; - } else if ((r == -ENOMEM) || (r == -EBADMSG)) { - return IRQ_HANDLED; - } + nfc_hci_recv_frame(phy->hdev, NULL); - nfc_hci_recv_frame(phy->hdev, skb); + return IRQ_HANDLED; + } else if ((r == -ENOMEM) || (r == -EBADMSG)) { + return IRQ_HANDLED; + } + nfc_hci_recv_frame(phy->hdev, skb); + } return IRQ_HANDLED; } @@ -369,6 +474,215 @@ static struct nfc_phy_ops i2c_phy_ops = { .disable = pn544_hci_i2c_disable, }; +static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name) +{ + struct pn544_i2c_phy *phy = phy_id; + + pr_info(DRIVER_DESC ": Starting Firmware Download (%s)\n", + firmware_name); + + strcpy(phy->firmware_name, firmware_name); + + phy->fw_work_state = FW_WORK_STATE_START; + + schedule_work(&phy->fw_work); + + return 0; +} + +static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy, + int result) +{ + pr_info(DRIVER_DESC ": Firmware Download Complete, result=%d\n", result); + + pn544_hci_i2c_disable(phy); + + phy->fw_work_state = FW_WORK_STATE_IDLE; + + if (phy->fw) { + release_firmware(phy->fw); + phy->fw = NULL; + } + + nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result); +} + +static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr, + const u8 *data, u16 datalen) +{ + u8 frame[PN544_FW_I2C_MAX_PAYLOAD]; + struct pn544_i2c_fw_frame_write *framep; + u16 params_len; + int framelen; + int r; + + if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN) + datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN; + + framep = (struct pn544_i2c_fw_frame_write *) frame; + + params_len = sizeof(framep->be_dest_addr) + + sizeof(framep->be_datalen) + datalen; + framelen = params_len + sizeof(framep->cmd) + + sizeof(framep->be_length); + + framep->cmd = PN544_FW_CMD_WRITE; + + put_unaligned_be16(params_len, &framep->be_length); + + framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16; + framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8; + framep->be_dest_addr[2] = dest_addr & 0xff; + + put_unaligned_be16(datalen, &framep->be_datalen); + + memcpy(framep->data, data, datalen); + + r = i2c_master_send(client, frame, framelen); + + if (r == framelen) + return datalen; + else if (r < 0) + return r; + else + return -EIO; +} + +static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr, + const u8 *data, u16 datalen) +{ + struct pn544_i2c_fw_frame_check frame; + int r; + u16 crc; + + /* calculate local crc for the data we want to check */ + crc = crc_ccitt(0xffff, data, datalen); + + frame.cmd = PN544_FW_CMD_CHECK; + + put_unaligned_be16(sizeof(frame.be_start_addr) + + sizeof(frame.be_datalen) + sizeof(frame.be_crc), + &frame.be_length); + + /* tell the chip the memory region to which our crc applies */ + frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16; + frame.be_start_addr[1] = (start_addr & 0xff00) >> 8; + frame.be_start_addr[2] = start_addr & 0xff; + + put_unaligned_be16(datalen, &frame.be_datalen); + + /* + * and give our local crc. Chip will calculate its own crc for the + * region and compare with ours. + */ + put_unaligned_be16(crc, &frame.be_crc); + + r = i2c_master_send(client, (const char *) &frame, sizeof(frame)); + + if (r == sizeof(frame)) + return 0; + else if (r < 0) + return r; + else + return -EIO; +} + +static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy) +{ + int r; + + r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev, + phy->fw_blob_dest_addr + phy->fw_written, + phy->fw_blob_data + phy->fw_written, + phy->fw_blob_size - phy->fw_written); + if (r < 0) + return r; + + phy->fw_written += r; + phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER; + + return 0; +} + +static void pn544_hci_i2c_fw_work(struct work_struct *work) +{ + struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy, + fw_work); + int r; + struct pn544_i2c_fw_blob *blob; + + switch (phy->fw_work_state) { + case FW_WORK_STATE_START: + pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE); + + r = request_firmware(&phy->fw, phy->firmware_name, + &phy->i2c_dev->dev); + if (r < 0) + goto exit_state_start; + + blob = (struct pn544_i2c_fw_blob *) phy->fw->data; + phy->fw_blob_size = get_unaligned_be32(&blob->be_size); + phy->fw_blob_dest_addr = get_unaligned_be32(&blob->be_destaddr); + phy->fw_blob_data = blob->data; + + phy->fw_written = 0; + r = pn544_hci_i2c_fw_write_chunk(phy); + +exit_state_start: + if (r < 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + case FW_WORK_STATE_WAIT_WRITE_ANSWER: + r = phy->fw_cmd_result; + if (r < 0) + goto exit_state_wait_write_answer; + + if (phy->fw_written == phy->fw_blob_size) { + r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev, + phy->fw_blob_dest_addr, + phy->fw_blob_data, + phy->fw_blob_size); + if (r < 0) + goto exit_state_wait_write_answer; + phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER; + break; + } + + r = pn544_hci_i2c_fw_write_chunk(phy); + +exit_state_wait_write_answer: + if (r < 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + case FW_WORK_STATE_WAIT_CHECK_ANSWER: + r = phy->fw_cmd_result; + if (r < 0) + goto exit_state_wait_check_answer; + + blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data + + phy->fw_blob_size); + phy->fw_blob_size = get_unaligned_be32(&blob->be_size); + if (phy->fw_blob_size != 0) { + phy->fw_blob_dest_addr = + get_unaligned_be32(&blob->be_destaddr); + phy->fw_blob_data = blob->data; + + phy->fw_written = 0; + r = pn544_hci_i2c_fw_write_chunk(phy); + } + +exit_state_wait_check_answer: + if (r < 0 || phy->fw_blob_size == 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + default: + break; + } +} + static int pn544_hci_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -392,6 +706,9 @@ static int pn544_hci_i2c_probe(struct i2c_client *client, return -ENOMEM; } + INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work); + phy->fw_work_state = FW_WORK_STATE_IDLE; + phy->i2c_dev = client; i2c_set_clientdata(client, phy); @@ -428,7 +745,8 @@ static int pn544_hci_i2c_probe(struct i2c_client *client, r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM, - PN544_HCI_I2C_LLC_MAX_PAYLOAD, NULL, &phy->hdev); + PN544_HCI_I2C_LLC_MAX_PAYLOAD, + pn544_hci_i2c_fw_download, &phy->hdev); if (r < 0) goto err_hci; @@ -451,6 +769,10 @@ static int pn544_hci_i2c_remove(struct i2c_client *client) dev_dbg(&client->dev, "%s\n", __func__); + cancel_work_sync(&phy->fw_work); + if (phy->fw_work_state != FW_WORK_STATE_IDLE) + pn544_hci_i2c_fw_work_complete(phy, -ENODEV); + pn544_hci_remove(phy->hdev); if (phy->powered) -- cgit v0.10.2 From 4eba11e82a0365117be92453c5c91a263500fd1a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 18 Jun 2013 01:48:26 +0300 Subject: NFC: hci: Fix enable/disable confusion There is a cut and paste bug so we enable a second time instead of disabling. Signed-off-by: Dan Carpenter Signed-off-by: Samuel Ortiz diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index fe66908..d07ca4c 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -717,7 +717,7 @@ static int hci_disable_se(struct nfc_dev *nfc_dev, u32 se_idx) struct nfc_hci_dev *hdev = nfc_get_drvdata(nfc_dev); if (hdev->ops->disable_se) - return hdev->ops->enable_se(hdev, se_idx); + return hdev->ops->disable_se(hdev, se_idx); return 0; } -- cgit v0.10.2 From 2c3832834b95e0226da1d13229472978f78462c5 Mon Sep 17 00:00:00 2001 From: Arron Wang Date: Tue, 30 Jul 2013 14:35:35 +0200 Subject: NFC: Fix secure element state check Another typo from the initial commit where we check for the secure element type field instead of its state when enabling or disabling it. Signed-off-by: Arron Wang Signed-off-by: Samuel Ortiz diff --git a/net/nfc/core.c b/net/nfc/core.c index d252912..ee1fe66 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -583,7 +583,7 @@ int nfc_enable_se(struct nfc_dev *dev, u32 se_idx) goto error; } - if (se->type == NFC_SE_ENABLED) { + if (se->state == NFC_SE_ENABLED) { rc = -EALREADY; goto error; } @@ -626,7 +626,7 @@ int nfc_disable_se(struct nfc_dev *dev, u32 se_idx) goto error; } - if (se->type == NFC_SE_DISABLED) { + if (se->state == NFC_SE_DISABLED) { rc = -EALREADY; goto error; } -- cgit v0.10.2 From 39525ee1dc78ca1f5f2fb1f764f7a141005fe440 Mon Sep 17 00:00:00 2001 From: Arron Wang Date: Tue, 30 Jul 2013 14:40:05 +0200 Subject: NFC: Update secure element state The secure element state was not updated from the enable/disable ops, leaving the SE state to disabled for ever. Signed-off-by: Arron Wang Signed-off-by: Samuel Ortiz diff --git a/net/nfc/core.c b/net/nfc/core.c index ee1fe66..e92923c 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -589,6 +589,8 @@ int nfc_enable_se(struct nfc_dev *dev, u32 se_idx) } rc = dev->ops->enable_se(dev, se_idx); + if (rc >= 0) + se->state = NFC_SE_ENABLED; error: device_unlock(&dev->dev); @@ -632,6 +634,8 @@ int nfc_disable_se(struct nfc_dev *dev, u32 se_idx) } rc = dev->ops->disable_se(dev, se_idx); + if (rc >= 0) + se->state = NFC_SE_DISABLED; error: device_unlock(&dev->dev); -- cgit v0.10.2 From dee08ab83d0378d922b67e7cf10bbec3e4ea343b Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Wed, 14 Aug 2013 23:10:06 +0100 Subject: net: rfkill: Do not ignore errors from regulator_enable() Function regulator_enable() may return an error that has to be checked. This patch changes function rfkill_regulator_set_block() so that it checks for the return code. Also, rfkill_data->reg_enabled is set to 'true' only if there is no error. This fixes the following compilation warning: net/rfkill/rfkill-regulator.c:43:20: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Luis Henriques Signed-off-by: Johannes Berg diff --git a/net/rfkill/rfkill-regulator.c b/net/rfkill/rfkill-regulator.c index d11ac79..cf5b145 100644 --- a/net/rfkill/rfkill-regulator.c +++ b/net/rfkill/rfkill-regulator.c @@ -30,6 +30,7 @@ struct rfkill_regulator_data { static int rfkill_regulator_set_block(void *data, bool blocked) { struct rfkill_regulator_data *rfkill_data = data; + int ret = 0; pr_debug("%s: blocked: %d\n", __func__, blocked); @@ -40,15 +41,16 @@ static int rfkill_regulator_set_block(void *data, bool blocked) } } else { if (!rfkill_data->reg_enabled) { - regulator_enable(rfkill_data->vcc); - rfkill_data->reg_enabled = true; + ret = regulator_enable(rfkill_data->vcc); + if (!ret) + rfkill_data->reg_enabled = true; } } pr_debug("%s: regulator_is_enabled after set_block: %d\n", __func__, regulator_is_enabled(rfkill_data->vcc)); - return 0; + return ret; } static struct rfkill_ops rfkill_regulator_ops = { -- cgit v0.10.2 From 4061f895088a2825b15312947aedb8574e2d8de5 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 10 Aug 2013 12:27:19 +0200 Subject: brcmfmac: use irq safe spinlock in brcmf_sdbrcm_txdata() Firmware-signalling needs transmit to firmware to be atomic and uses a spinlock with irq disabled. Therefor, brcmf_sdbrcm_txdata() should not use spin_unlock_bh() as it would enable the interrupts. Reviewed-by: Hante Meuleman Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 080395f..9249b6d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -36,7 +36,11 @@ struct brcmf_bus_dcmd { * * @init: prepare for communication with dongle. * @stop: clear pending frames, disable data flow. - * @txdata: send a data frame to the dongle (callee disposes skb). + * @txdata: send a data frame to the dongle. When the data + * has been transferred, the common driver must be + * notified using brcmf_txcomplete(). The common + * driver calls this function with interrupts + * disabled. * @txctl: transmit a control request message to dongle. * @rxctl: receive a control response message from dongle. * @gettxq: obtain a reference of bus transmit queue (optional). diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 2641119..5cbce1d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2276,6 +2276,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; + ulong flags; brcmf_dbg(TRACE, "Enter\n"); @@ -2293,7 +2294,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) bus->sdcnt.fcqueued++; /* Priority based enq */ - spin_lock_bh(&bus->txqlock); + spin_lock_irqsave(&bus->txqlock, flags); if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) { skb_pull(pkt, SDPCM_HDRLEN); brcmf_txcomplete(bus->sdiodev->dev, pkt, false); @@ -2307,7 +2308,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) bus->txoff = true; brcmf_txflowblock(bus->sdiodev->dev, true); } - spin_unlock_bh(&bus->txqlock); + spin_unlock_irqrestore(&bus->txqlock, flags); #ifdef DEBUG if (pktq_plen(&bus->txq, prec) > qcount[prec]) -- cgit v0.10.2 From 04779fddeff723cf5afe529e4ed67fc86f25ba37 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 10 Aug 2013 12:27:20 +0200 Subject: brcmfmac: .txdata() bus callback should not call brcmf_txcomplete() With firmware-signalling the packet handed to the bus specific driver layer should not be discarded with brcmf_txcomplete() in the failure path. Instead only an error is returned and the caller decides what to do with the packet. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 5cbce1d..db31312 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2297,7 +2297,6 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) spin_lock_irqsave(&bus->txqlock, flags); if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) { skb_pull(pkt, SDPCM_HDRLEN); - brcmf_txcomplete(bus->sdiodev->dev, pkt, false); brcmf_err("out of bus->txq !!!\n"); ret = -ENOSR; } else { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c index 29b1f24..601b0d0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c @@ -1745,6 +1745,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) int fifo = BRCMF_FWS_FIFO_BCMC; bool multicast = is_multicast_ether_addr(eh->h_dest); bool pae = eh->h_proto == htons(ETH_P_PAE); + int ret; /* determine the priority */ if (!skb->priority) @@ -1759,7 +1760,10 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) brcmf_proto_hdrpush(drvr, ifp->ifidx, 0, skb); /* Use bus module to send data frame */ - return brcmf_bus_txdata(drvr->bus_if, skb); + ret = brcmf_bus_txdata(drvr->bus_if, skb); + if (ret < 0) + brcmf_txfinalize(drvr, skb, false); + return ret; } /* set control buffer information */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 322cadc..39e01a7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -614,7 +614,6 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb) return 0; fail: - brcmf_txcomplete(dev, skb, false); return ret; } -- cgit v0.10.2 From 87edd8916ee261cd8c49b736f156d602054bd9fd Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 10 Aug 2013 12:27:21 +0200 Subject: brcmfmac: add AMPDU reordering functionality This feature moves the responsibility of collecting all MPDUs in an AMPDU session in the correct order from the firmware to the host driver. This reduces buffer requirement on the firmware side. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 86cbfe2..3943fb8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -209,6 +209,8 @@ #define BRCMF_DCMD_MEDLEN 1536 #define BRCMF_DCMD_MAXLEN 8192 +#define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256 + /* Pattern matching filter. Specifies an offset within received packets to * start matching, the pattern to match, the size of the pattern, and a bitmask * that indicates which bits within the pattern should be matched. @@ -505,6 +507,25 @@ struct brcmf_dcmd { uint needed; /* bytes needed (optional) */ }; +/** + * struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info + * + * @pktslots: dynamic allocated array for ordering AMPDU packets. + * @flow_id: AMPDU flow identifier. + * @cur_idx: last AMPDU index from firmware. + * @exp_idx: expected next AMPDU index. + * @max_idx: maximum amount of packets per AMPDU. + * @pend_pkts: number of packets currently in @pktslots. + */ +struct brcmf_ampdu_rx_reorder { + struct sk_buff **pktslots; + u8 flow_id; + u8 cur_idx; + u8 exp_idx; + u8 max_idx; + u8 pend_pkts; +}; + /* Forward decls for struct brcmf_pub (see below) */ struct brcmf_proto; /* device communication protocol info */ struct brcmf_cfg80211_dev; /* cfg80211 device info */ @@ -539,6 +560,9 @@ struct brcmf_pub { bool fw_signals; struct brcmf_fws_info *fws; spinlock_t fws_spinlock; + + struct brcmf_ampdu_rx_reorder + *reorder_flows[BRCMF_AMPDU_RX_REORDER_MAXFLOWS]; #ifdef DEBUG struct dentry *dbgfs_dir; #endif @@ -604,6 +628,9 @@ struct brcmf_if { wait_queue_head_t pend_8021x_wait; }; +struct brcmf_skb_reorder_data { + u8 *reorder; +}; extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 8009901..9bc2785 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -38,6 +38,19 @@ MODULE_LICENSE("Dual BSD/GPL"); #define MAX_WAIT_FOR_8021X_TX 50 /* msecs */ +/* AMPDU rx reordering definitions */ +#define BRCMF_RXREORDER_FLOWID_OFFSET 0 +#define BRCMF_RXREORDER_MAXIDX_OFFSET 2 +#define BRCMF_RXREORDER_FLAGS_OFFSET 4 +#define BRCMF_RXREORDER_CURIDX_OFFSET 6 +#define BRCMF_RXREORDER_EXPIDX_OFFSET 8 + +#define BRCMF_RXREORDER_DEL_FLOW 0x01 +#define BRCMF_RXREORDER_FLUSH_ALL 0x02 +#define BRCMF_RXREORDER_CURIDX_VALID 0x04 +#define BRCMF_RXREORDER_EXPIDX_VALID 0x08 +#define BRCMF_RXREORDER_NEW_HOLE 0x10 + /* Error bits */ int brcmf_msg_level; module_param_named(debug, brcmf_msg_level, int, S_IRUSR | S_IWUSR); @@ -279,16 +292,243 @@ void brcmf_txflowblock(struct device *dev, bool state) } } +static void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb) +{ + skb->dev = ifp->ndev; + skb->protocol = eth_type_trans(skb, skb->dev); + + if (skb->pkt_type == PACKET_MULTICAST) + ifp->stats.multicast++; + + /* Process special event packets */ + brcmf_fweh_process_skb(ifp->drvr, skb); + + if (!(ifp->ndev->flags & IFF_UP)) { + brcmu_pkt_buf_free_skb(skb); + return; + } + + ifp->stats.rx_bytes += skb->len; + ifp->stats.rx_packets++; + + brcmf_dbg(DATA, "rx proto=0x%X\n", ntohs(skb->protocol)); + if (in_interrupt()) + netif_rx(skb); + else + /* If the receive is not processed inside an ISR, + * the softirqd must be woken explicitly to service + * the NET_RX_SOFTIRQ. This is handled by netif_rx_ni(). + */ + netif_rx_ni(skb); +} + +static void brcmf_rxreorder_get_skb_list(struct brcmf_ampdu_rx_reorder *rfi, + u8 start, u8 end, + struct sk_buff_head *skb_list) +{ + /* initialize return list */ + __skb_queue_head_init(skb_list); + + if (rfi->pend_pkts == 0) { + brcmf_dbg(INFO, "no packets in reorder queue\n"); + return; + } + + do { + if (rfi->pktslots[start]) { + __skb_queue_tail(skb_list, rfi->pktslots[start]); + rfi->pktslots[start] = NULL; + } + start++; + if (start > rfi->max_idx) + start = 0; + } while (start != end); + rfi->pend_pkts -= skb_queue_len(skb_list); +} + +static void brcmf_rxreorder_process_info(struct brcmf_if *ifp, u8 *reorder_data, + struct sk_buff *pkt) +{ + u8 flow_id, max_idx, cur_idx, exp_idx, end_idx; + struct brcmf_ampdu_rx_reorder *rfi; + struct sk_buff_head reorder_list; + struct sk_buff *pnext; + u8 flags; + u32 buf_size; + + flow_id = reorder_data[BRCMF_RXREORDER_FLOWID_OFFSET]; + flags = reorder_data[BRCMF_RXREORDER_FLAGS_OFFSET]; + + /* validate flags and flow id */ + if (flags == 0xFF) { + brcmf_err("invalid flags...so ignore this packet\n"); + brcmf_netif_rx(ifp, pkt); + return; + } + + rfi = ifp->drvr->reorder_flows[flow_id]; + if (flags & BRCMF_RXREORDER_DEL_FLOW) { + brcmf_dbg(INFO, "flow-%d: delete\n", + flow_id); + + if (rfi == NULL) { + brcmf_dbg(INFO, "received flags to cleanup, but no flow (%d) yet\n", + flow_id); + brcmf_netif_rx(ifp, pkt); + return; + } + + brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, rfi->exp_idx, + &reorder_list); + /* add the last packet */ + __skb_queue_tail(&reorder_list, pkt); + kfree(rfi); + ifp->drvr->reorder_flows[flow_id] = NULL; + goto netif_rx; + } + /* from here on we need a flow reorder instance */ + if (rfi == NULL) { + buf_size = sizeof(*rfi); + max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET]; + + buf_size += (max_idx + 1) * sizeof(pkt); + + /* allocate space for flow reorder info */ + brcmf_dbg(INFO, "flow-%d: start, maxidx %d\n", + flow_id, max_idx); + rfi = kzalloc(buf_size, GFP_ATOMIC); + if (rfi == NULL) { + brcmf_err("failed to alloc buffer\n"); + brcmf_netif_rx(ifp, pkt); + return; + } + + ifp->drvr->reorder_flows[flow_id] = rfi; + rfi->pktslots = (struct sk_buff **)(rfi+1); + rfi->max_idx = max_idx; + } + if (flags & BRCMF_RXREORDER_NEW_HOLE) { + if (rfi->pend_pkts) { + brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, + rfi->exp_idx, + &reorder_list); + WARN_ON(rfi->pend_pkts); + } else { + __skb_queue_head_init(&reorder_list); + } + rfi->cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET]; + rfi->exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; + rfi->max_idx = reorder_data[BRCMF_RXREORDER_MAXIDX_OFFSET]; + rfi->pktslots[rfi->cur_idx] = pkt; + rfi->pend_pkts++; + brcmf_dbg(DATA, "flow-%d: new hole %d (%d), pending %d\n", + flow_id, rfi->cur_idx, rfi->exp_idx, rfi->pend_pkts); + } else if (flags & BRCMF_RXREORDER_CURIDX_VALID) { + cur_idx = reorder_data[BRCMF_RXREORDER_CURIDX_OFFSET]; + exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; + + if ((exp_idx == rfi->exp_idx) && (cur_idx != rfi->exp_idx)) { + /* still in the current hole */ + /* enqueue the current on the buffer chain */ + if (rfi->pktslots[cur_idx] != NULL) { + brcmf_dbg(INFO, "HOLE: ERROR buffer pending..free it\n"); + brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]); + rfi->pktslots[cur_idx] = NULL; + } + rfi->pktslots[cur_idx] = pkt; + rfi->pend_pkts++; + rfi->cur_idx = cur_idx; + brcmf_dbg(DATA, "flow-%d: store pkt %d (%d), pending %d\n", + flow_id, cur_idx, exp_idx, rfi->pend_pkts); + + /* can return now as there is no reorder + * list to process. + */ + return; + } + if (rfi->exp_idx == cur_idx) { + if (rfi->pktslots[cur_idx] != NULL) { + brcmf_dbg(INFO, "error buffer pending..free it\n"); + brcmu_pkt_buf_free_skb(rfi->pktslots[cur_idx]); + rfi->pktslots[cur_idx] = NULL; + } + rfi->pktslots[cur_idx] = pkt; + rfi->pend_pkts++; + + /* got the expected one. flush from current to expected + * and update expected + */ + brcmf_dbg(DATA, "flow-%d: expected %d (%d), pending %d\n", + flow_id, cur_idx, exp_idx, rfi->pend_pkts); + + rfi->cur_idx = cur_idx; + rfi->exp_idx = exp_idx; + + brcmf_rxreorder_get_skb_list(rfi, cur_idx, exp_idx, + &reorder_list); + brcmf_dbg(DATA, "flow-%d: freeing buffers %d, pending %d\n", + flow_id, skb_queue_len(&reorder_list), + rfi->pend_pkts); + } else { + u8 end_idx; + + brcmf_dbg(DATA, "flow-%d (0x%x): both moved, old %d/%d, new %d/%d\n", + flow_id, flags, rfi->cur_idx, rfi->exp_idx, + cur_idx, exp_idx); + if (flags & BRCMF_RXREORDER_FLUSH_ALL) + end_idx = rfi->exp_idx; + else + end_idx = exp_idx; + + /* flush pkts first */ + brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx, + &reorder_list); + + if (exp_idx == ((cur_idx + 1) % (rfi->max_idx + 1))) { + __skb_queue_tail(&reorder_list, pkt); + } else { + rfi->pktslots[cur_idx] = pkt; + rfi->pend_pkts++; + } + rfi->exp_idx = exp_idx; + rfi->cur_idx = cur_idx; + } + } else { + /* explicity window move updating the expected index */ + exp_idx = reorder_data[BRCMF_RXREORDER_EXPIDX_OFFSET]; + + brcmf_dbg(DATA, "flow-%d (0x%x): change expected: %d -> %d\n", + flow_id, flags, rfi->exp_idx, exp_idx); + if (flags & BRCMF_RXREORDER_FLUSH_ALL) + end_idx = rfi->exp_idx; + else + end_idx = exp_idx; + + brcmf_rxreorder_get_skb_list(rfi, rfi->exp_idx, end_idx, + &reorder_list); + __skb_queue_tail(&reorder_list, pkt); + /* set the new expected idx */ + rfi->exp_idx = exp_idx; + } +netif_rx: + skb_queue_walk_safe(&reorder_list, pkt, pnext) { + __skb_unlink(pkt, &reorder_list); + brcmf_netif_rx(ifp, pkt); + } +} + void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) { struct sk_buff *skb, *pnext; struct brcmf_if *ifp; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; + struct brcmf_skb_reorder_data *rd; u8 ifidx; int ret; - brcmf_dbg(DATA, "Enter\n"); + brcmf_dbg(DATA, "Enter: %s: count=%u\n", dev_name(dev), + skb_queue_len(skb_list)); skb_queue_walk_safe(skb_list, skb, pnext) { skb_unlink(skb, skb_list); @@ -304,31 +544,11 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) continue; } - skb->dev = ifp->ndev; - skb->protocol = eth_type_trans(skb, skb->dev); - - if (skb->pkt_type == PACKET_MULTICAST) - ifp->stats.multicast++; - - /* Process special event packets */ - brcmf_fweh_process_skb(drvr, skb); - - if (!(ifp->ndev->flags & IFF_UP)) { - brcmu_pkt_buf_free_skb(skb); - continue; - } - - ifp->stats.rx_bytes += skb->len; - ifp->stats.rx_packets++; - - if (in_interrupt()) - netif_rx(skb); + rd = (struct brcmf_skb_reorder_data *)skb->cb; + if (rd->reorder) + brcmf_rxreorder_process_info(ifp, rd->reorder, skb); else - /* If the receive is not processed inside an ISR, - * the softirqd must be woken explicitly to service the - * NET_RX_SOFTIRQ. This is handled by netif_rx_ni(). - */ - netif_rx_ni(skb); + brcmf_netif_rx(ifp, skb); } } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c index 601b0d0..438c7b9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c @@ -1483,6 +1483,7 @@ static int brcmf_fws_notify_bcmc_credit_support(struct brcmf_if *ifp, int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len, struct sk_buff *skb) { + struct brcmf_skb_reorder_data *rd; struct brcmf_fws_info *fws = drvr->fws; u8 *signal_data; s16 data_len; @@ -1536,9 +1537,12 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len, err = BRCMF_FWS_RET_OK_NOSCHEDULE; switch (type) { - case BRCMF_FWS_TYPE_HOST_REORDER_RXPKTS: case BRCMF_FWS_TYPE_COMP_TXSTATUS: break; + case BRCMF_FWS_TYPE_HOST_REORDER_RXPKTS: + rd = (struct brcmf_skb_reorder_data *)skb->cb; + rd->reorder = data; + break; case BRCMF_FWS_TYPE_MACDESC_ADD: case BRCMF_FWS_TYPE_MACDESC_DEL: brcmf_fws_macdesc_indicate(fws, type, data); @@ -1747,6 +1751,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) bool pae = eh->h_proto == htons(ETH_P_PAE); int ret; + brcmf_dbg(DATA, "tx proto=0x%X\n", ntohs(eh->h_proto)); /* determine the priority */ if (!skb->priority) skb->priority = cfg80211_classify8021d(skb); @@ -1915,7 +1920,8 @@ int brcmf_fws_init(struct brcmf_pub *drvr) if (drvr->fws->fcmode != BRCMF_FWS_FCMODE_NONE) tlv |= BRCMF_FWS_FLAGS_XONXOFF_SIGNALS | BRCMF_FWS_FLAGS_CREDIT_STATUS_SIGNALS | - BRCMF_FWS_FLAGS_HOST_PROPTXSTATUS_ACTIVE; + BRCMF_FWS_FLAGS_HOST_PROPTXSTATUS_ACTIVE | + BRCMF_FWS_FLAGS_HOST_RXREORDER_ACTIVE; rc = brcmf_fweh_register(drvr, BRCMF_E_FIFO_CREDIT_MAP, brcmf_fws_notify_credit_map); @@ -1940,6 +1946,9 @@ int brcmf_fws_init(struct brcmf_pub *drvr) goto fail_event; } + if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1)) + brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n"); + brcmf_fws_hanger_init(&drvr->fws->hanger); brcmf_fws_macdesc_init(&drvr->fws->desc.other, NULL, 0); brcmf_fws_macdesc_set_name(drvr->fws, &drvr->fws->desc.other); -- cgit v0.10.2 From 0a4254be94fd3afc17fb84a88adabd4460dd4c56 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Sat, 10 Aug 2013 12:27:22 +0200 Subject: brcmfmac: always use worker thread for tx data. When fw signalling is disabled tx is sent immediately. Using queues and worker thread allows usb to do synchronous autopm. This patch makes fws use queues and worker thread even if signalling is not supported by FW or not enabled. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 3943fb8..df94d0e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -557,7 +557,6 @@ struct brcmf_pub { struct brcmf_fweh_info fweh; - bool fw_signals; struct brcmf_fws_info *fws; spinlock_t fws_spinlock; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 9bc2785..e067aec 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -278,18 +278,10 @@ void brcmf_txflowblock(struct device *dev, bool state) { struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; - int i; brcmf_dbg(TRACE, "Enter\n"); - if (brcmf_fws_fc_active(drvr->fws)) { - brcmf_fws_bus_blocked(drvr, state); - } else { - for (i = 0; i < BRCMF_MAX_IFS; i++) - brcmf_txflowblock_if(drvr->iflist[i], - BRCMF_NETIF_STOP_REASON_BLOCK_BUS, - state); - } + brcmf_fws_bus_blocked(drvr, state); } static void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb) @@ -534,7 +526,7 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) skb_unlink(skb, skb_list); /* process and remove protocol-specific header */ - ret = brcmf_proto_hdrpull(drvr, drvr->fw_signals, &ifidx, skb); + ret = brcmf_proto_hdrpull(drvr, true, &ifidx, skb); ifp = drvr->iflist[ifidx]; if (ret || !ifp || !ifp->ndev) { @@ -1109,7 +1101,6 @@ int brcmf_bus_start(struct device *dev) if (ret < 0) goto fail; - drvr->fw_signals = true; ret = brcmf_fws_init(drvr); if (ret < 0) goto fail; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c index 438c7b9..15fc807 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c @@ -425,6 +425,7 @@ struct brcmf_fws_info { struct brcmf_fws_stats stats; struct brcmf_fws_hanger hanger; enum brcmf_fws_fcmode fcmode; + bool fw_signals; bool bcmc_credit_check; struct brcmf_fws_macdesc_table desc; struct workqueue_struct *fws_wq; @@ -1160,7 +1161,8 @@ static void brcmf_fws_return_credits(struct brcmf_fws_info *fws, static void brcmf_fws_schedule_deq(struct brcmf_fws_info *fws) { /* only schedule dequeue when there are credits for delayed traffic */ - if (fws->fifo_credit_map & fws->fifo_delay_map) + if ((fws->fifo_credit_map & fws->fifo_delay_map) || + (!brcmf_fws_fc_active(fws) && fws->fifo_delay_map)) queue_work(fws->fws_wq, &fws->fws_dequeue_work); } @@ -1498,8 +1500,10 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len, WARN_ON(signal_len > skb->len); + if (!signal_len) + return 0; /* if flow control disabled, skip to packet data and leave */ - if (!signal_len || !drvr->fw_signals) { + if (!fws->fw_signals) { skb_pull(skb, signal_len); return 0; } @@ -1749,7 +1753,6 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) int fifo = BRCMF_FWS_FIFO_BCMC; bool multicast = is_multicast_ether_addr(eh->h_dest); bool pae = eh->h_proto == htons(ETH_P_PAE); - int ret; brcmf_dbg(DATA, "tx proto=0x%X\n", ntohs(eh->h_proto)); /* determine the priority */ @@ -1760,17 +1763,6 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) if (pae) atomic_inc(&ifp->pend_8021x_cnt); - if (!brcmf_fws_fc_active(fws)) { - /* If the protocol uses a data header, apply it */ - brcmf_proto_hdrpush(drvr, ifp->ifidx, 0, skb); - - /* Use bus module to send data frame */ - ret = brcmf_bus_txdata(drvr->bus_if, skb); - if (ret < 0) - brcmf_txfinalize(drvr, skb, false); - return ret; - } - /* set control buffer information */ skcb->if_flags = 0; skcb->state = BRCMF_FWS_SKBSTATE_NEW; @@ -1818,7 +1810,7 @@ void brcmf_fws_add_interface(struct brcmf_if *ifp) struct brcmf_fws_info *fws = ifp->drvr->fws; struct brcmf_fws_mac_descriptor *entry; - if (!ifp->ndev || !ifp->drvr->fw_signals) + if (!ifp->ndev) return; entry = &fws->desc.iface[ifp->ifidx]; @@ -1849,15 +1841,38 @@ void brcmf_fws_del_interface(struct brcmf_if *ifp) static void brcmf_fws_dequeue_worker(struct work_struct *worker) { struct brcmf_fws_info *fws; + struct brcmf_pub *drvr; struct sk_buff *skb; ulong flags; int fifo; + u32 hslot; + u32 ifidx; + int ret; fws = container_of(worker, struct brcmf_fws_info, fws_dequeue_work); + drvr = fws->drvr; - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(drvr, flags); for (fifo = BRCMF_FWS_FIFO_BCMC; fifo >= 0 && !fws->bus_flow_blocked; fifo--) { + if (!brcmf_fws_fc_active(fws)) { + while ((skb = brcmf_fws_deq(fws, fifo)) != NULL) { + hslot = brcmf_skb_htod_tag_get_field(skb, + HSLOT); + brcmf_fws_hanger_poppkt(&fws->hanger, hslot, + &skb, true); + ifidx = brcmf_skb_if_flags_get_field(skb, + INDEX); + brcmf_proto_hdrpush(drvr, ifidx, 0, skb); + /* Use bus module to send data frame */ + ret = brcmf_bus_txdata(drvr->bus_if, skb); + if (ret < 0) + brcmf_txfinalize(drvr, skb, false); + if (fws->bus_flow_blocked) + break; + } + continue; + } while ((fws->fifo_credit[fifo]) || ((!fws->bcmc_credit_check) && (fifo == BRCMF_FWS_FIFO_BCMC))) { skb = brcmf_fws_deq(fws, fifo); @@ -1885,17 +1900,15 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker) } } } - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(drvr, flags); } int brcmf_fws_init(struct brcmf_pub *drvr) { + struct brcmf_fws_info *fws; u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS; int rc; - if (!drvr->fw_signals) - return 0; - spin_lock_init(&drvr->fws_spinlock); drvr->fws = kzalloc(sizeof(*(drvr->fws)), GFP_KERNEL); @@ -1904,20 +1917,21 @@ int brcmf_fws_init(struct brcmf_pub *drvr) goto fail; } + fws = drvr->fws; /* set linkage back */ - drvr->fws->drvr = drvr; - drvr->fws->fcmode = fcmode; + fws->drvr = drvr; + fws->fcmode = fcmode; - drvr->fws->fws_wq = create_singlethread_workqueue("brcmf_fws_wq"); - if (drvr->fws->fws_wq == NULL) { + fws->fws_wq = create_singlethread_workqueue("brcmf_fws_wq"); + if (fws->fws_wq == NULL) { brcmf_err("workqueue creation failed\n"); rc = -EBADF; goto fail; } - INIT_WORK(&drvr->fws->fws_dequeue_work, brcmf_fws_dequeue_worker); + INIT_WORK(&fws->fws_dequeue_work, brcmf_fws_dequeue_worker); /* enable firmware signalling if fcmode active */ - if (drvr->fws->fcmode != BRCMF_FWS_FCMODE_NONE) + if (fws->fcmode != BRCMF_FWS_FCMODE_NONE) tlv |= BRCMF_FWS_FLAGS_XONXOFF_SIGNALS | BRCMF_FWS_FLAGS_CREDIT_STATUS_SIGNALS | BRCMF_FWS_FLAGS_HOST_PROPTXSTATUS_ACTIVE | @@ -1937,34 +1951,33 @@ int brcmf_fws_init(struct brcmf_pub *drvr) goto fail; } - /* setting the iovar may fail if feature is unsupported + /* Setting the iovar may fail if feature is unsupported * so leave the rc as is so driver initialization can - * continue. + * continue. Set mode back to none indicating not enabled. */ + fws->fw_signals = true; if (brcmf_fil_iovar_int_set(drvr->iflist[0], "tlv", tlv)) { brcmf_err("failed to set bdcv2 tlv signaling\n"); - goto fail_event; + fws->fcmode = BRCMF_FWS_FCMODE_NONE; + fws->fw_signals = false; } if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1)) brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n"); - brcmf_fws_hanger_init(&drvr->fws->hanger); - brcmf_fws_macdesc_init(&drvr->fws->desc.other, NULL, 0); - brcmf_fws_macdesc_set_name(drvr->fws, &drvr->fws->desc.other); - brcmu_pktq_init(&drvr->fws->desc.other.psq, BRCMF_FWS_PSQ_PREC_COUNT, + brcmf_fws_hanger_init(&fws->hanger); + brcmf_fws_macdesc_init(&fws->desc.other, NULL, 0); + brcmf_fws_macdesc_set_name(fws, &fws->desc.other); + brcmu_pktq_init(&fws->desc.other.psq, BRCMF_FWS_PSQ_PREC_COUNT, BRCMF_FWS_PSQ_LEN); /* create debugfs file for statistics */ - brcmf_debugfs_create_fws_stats(drvr, &drvr->fws->stats); + brcmf_debugfs_create_fws_stats(drvr, &fws->stats); brcmf_dbg(INFO, "%s bdcv2 tlv signaling [%x]\n", - drvr->fw_signals ? "enabled" : "disabled", tlv); + fws->fw_signals ? "enabled" : "disabled", tlv); return 0; -fail_event: - brcmf_fweh_unregister(drvr, BRCMF_E_BCMC_CREDIT_SUPPORT); - brcmf_fweh_unregister(drvr, BRCMF_E_FIFO_CREDIT_MAP); fail: brcmf_fws_deinit(drvr); return rc; @@ -1978,11 +1991,6 @@ void brcmf_fws_deinit(struct brcmf_pub *drvr) if (!fws) return; - /* disable firmware signalling entirely - * to avoid using the workqueue. - */ - drvr->fw_signals = false; - if (drvr->fws->fws_wq) destroy_workqueue(drvr->fws->fws_wq); @@ -1998,7 +2006,7 @@ void brcmf_fws_deinit(struct brcmf_pub *drvr) bool brcmf_fws_fc_active(struct brcmf_fws_info *fws) { - if (!fws) + if (!fws->creditmap_received) return false; return fws->fcmode != BRCMF_FWS_FCMODE_NONE; -- cgit v0.10.2 From 3f4f910fdc3b9eff06a007ab28762cd3d6720d51 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Sat, 10 Aug 2013 12:27:23 +0200 Subject: brcmfmac: no fws locking outside fws module. FWS uses locking to protect its data while being called from various entries. On bus_txdata the lock was kept resulting in unnecessary long locking, but also creating possibility for deadlock. This update changes the locking to release lock when bus_txdata is called. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index df94d0e..1273dfd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -558,7 +558,6 @@ struct brcmf_pub { struct brcmf_fweh_info fweh; struct brcmf_fws_info *fws; - spinlock_t fws_spinlock; struct brcmf_ampdu_rx_reorder *reorder_flows[BRCMF_AMPDU_RX_REORDER_MAXFLOWS]; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c index 15fc807..82f9140 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c @@ -422,6 +422,8 @@ struct brcmf_fws_macdesc_table { struct brcmf_fws_info { struct brcmf_pub *drvr; + spinlock_t spinlock; + ulong flags; struct brcmf_fws_stats stats; struct brcmf_fws_hanger hanger; enum brcmf_fws_fcmode fcmode; @@ -484,6 +486,18 @@ static int brcmf_fws_get_tlv_len(struct brcmf_fws_info *fws, } #undef BRCMF_FWS_TLV_DEF +static void brcmf_fws_lock(struct brcmf_fws_info *fws) + __acquires(&fws->spinlock) +{ + spin_lock_irqsave(&fws->spinlock, fws->flags); +} + +static void brcmf_fws_unlock(struct brcmf_fws_info *fws) + __releases(&fws->spinlock) +{ + spin_unlock_irqrestore(&fws->spinlock, fws->flags); +} + static bool brcmf_fws_ifidx_match(struct sk_buff *skb, void *arg) { u32 ifidx = brcmf_skb_if_flags_get_field(skb, INDEX); @@ -870,8 +884,11 @@ static bool brcmf_fws_tim_update(struct brcmf_fws_info *fws, skcb->state = BRCMF_FWS_SKBSTATE_TIM; bus = fws->drvr->bus_if; err = brcmf_fws_hdrpush(fws, skb); - if (err == 0) + if (err == 0) { + brcmf_fws_unlock(fws); err = brcmf_bus_txdata(bus, skb); + brcmf_fws_lock(fws); + } if (err) brcmu_pkt_buf_free_skb(skb); return true; @@ -906,26 +923,10 @@ static int brcmf_fws_rssi_indicate(struct brcmf_fws_info *fws, s8 rssi) return 0; } -/* using macro so sparse checking does not complain - * about locking imbalance. - */ -#define brcmf_fws_lock(drvr, flags) \ -do { \ - flags = 0; \ - spin_lock_irqsave(&((drvr)->fws_spinlock), (flags)); \ -} while (0) - -/* using macro so sparse checking does not complain - * about locking imbalance. - */ -#define brcmf_fws_unlock(drvr, flags) \ - spin_unlock_irqrestore(&((drvr)->fws_spinlock), (flags)) - static int brcmf_fws_macdesc_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data) { struct brcmf_fws_mac_descriptor *entry, *existing; - ulong flags; u8 mac_handle; u8 ifidx; u8 *addr; @@ -939,10 +940,10 @@ int brcmf_fws_macdesc_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data) if (entry->occupied) { brcmf_dbg(TRACE, "deleting %s mac %pM\n", entry->name, addr); - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(fws); brcmf_fws_macdesc_cleanup(fws, entry, -1); brcmf_fws_macdesc_deinit(entry); - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); } else fws->stats.mac_update_failed++; return 0; @@ -951,13 +952,13 @@ int brcmf_fws_macdesc_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data) existing = brcmf_fws_macdesc_lookup(fws, addr); if (IS_ERR(existing)) { if (!entry->occupied) { - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(fws); entry->mac_handle = mac_handle; brcmf_fws_macdesc_init(entry, addr, ifidx); brcmf_fws_macdesc_set_name(fws, entry); brcmu_pktq_init(&entry->psq, BRCMF_FWS_PSQ_PREC_COUNT, BRCMF_FWS_PSQ_LEN); - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); brcmf_dbg(TRACE, "add %s mac %pM\n", entry->name, addr); } else { fws->stats.mac_update_failed++; @@ -965,13 +966,13 @@ int brcmf_fws_macdesc_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data) } else { if (entry != existing) { brcmf_dbg(TRACE, "copy mac %s\n", existing->name); - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(fws); memcpy(entry, existing, offsetof(struct brcmf_fws_mac_descriptor, psq)); entry->mac_handle = mac_handle; brcmf_fws_macdesc_deinit(existing); brcmf_fws_macdesc_set_name(fws, entry); - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); brcmf_dbg(TRACE, "relocate %s mac %pM\n", entry->name, addr); } else { @@ -987,7 +988,6 @@ static int brcmf_fws_macdesc_state_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data) { struct brcmf_fws_mac_descriptor *entry; - ulong flags; u8 mac_handle; int ret; @@ -997,7 +997,7 @@ static int brcmf_fws_macdesc_state_indicate(struct brcmf_fws_info *fws, fws->stats.mac_ps_update_failed++; return -ESRCH; } - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(fws); /* a state update should wipe old credits */ entry->requested_credit = 0; entry->requested_packet = 0; @@ -1012,7 +1012,7 @@ static int brcmf_fws_macdesc_state_indicate(struct brcmf_fws_info *fws, brcmf_fws_tim_update(fws, entry, BRCMF_FWS_FIFO_AC_VO, true); ret = BRCMF_FWS_RET_OK_NOSCHEDULE; } - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); return ret; } @@ -1020,7 +1020,6 @@ static int brcmf_fws_interface_state_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data) { struct brcmf_fws_mac_descriptor *entry; - ulong flags; u8 ifidx; int ret; @@ -1039,7 +1038,7 @@ static int brcmf_fws_interface_state_indicate(struct brcmf_fws_info *fws, brcmf_dbg(TRACE, "%s (%d): %s\n", brcmf_fws_get_tlv_name(type), type, entry->name); - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(fws); switch (type) { case BRCMF_FWS_TYPE_INTERFACE_OPEN: entry->state = BRCMF_FWS_STATE_OPEN; @@ -1051,10 +1050,10 @@ static int brcmf_fws_interface_state_indicate(struct brcmf_fws_info *fws, break; default: ret = -EINVAL; - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); goto fail; } - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); return ret; fail: @@ -1066,7 +1065,6 @@ static int brcmf_fws_request_indicate(struct brcmf_fws_info *fws, u8 type, u8 *data) { struct brcmf_fws_mac_descriptor *entry; - ulong flags; entry = &fws->desc.nodes[data[1] & 0x1F]; if (!entry->occupied) { @@ -1080,14 +1078,14 @@ static int brcmf_fws_request_indicate(struct brcmf_fws_info *fws, u8 type, brcmf_dbg(TRACE, "%s (%d): %s cnt %d bmp %d\n", brcmf_fws_get_tlv_name(type), type, entry->name, data[0], data[2]); - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(fws); if (type == BRCMF_FWS_TYPE_MAC_REQUEST_CREDIT) entry->requested_credit = data[0]; else entry->requested_packet = data[0]; entry->ac_bitmap = data[2]; - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); return BRCMF_FWS_RET_OK_SCHEDULE; } @@ -1385,7 +1383,6 @@ brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot, static int brcmf_fws_fifocreditback_indicate(struct brcmf_fws_info *fws, u8 *data) { - ulong flags; int i; if (fws->fcmode != BRCMF_FWS_FCMODE_EXPLICIT_CREDIT) { @@ -1394,19 +1391,18 @@ static int brcmf_fws_fifocreditback_indicate(struct brcmf_fws_info *fws, } brcmf_dbg(DATA, "enter: data %pM\n", data); - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(fws); for (i = 0; i < BRCMF_FWS_FIFO_COUNT; i++) brcmf_fws_return_credits(fws, i, data[i]); brcmf_dbg(DATA, "map: credit %x delay %x\n", fws->fifo_credit_map, fws->fifo_delay_map); - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); return BRCMF_FWS_RET_OK_SCHEDULE; } static int brcmf_fws_txstatus_indicate(struct brcmf_fws_info *fws, u8 *data) { - ulong lflags; __le32 status_le; u32 status; u32 hslot; @@ -1420,9 +1416,9 @@ static int brcmf_fws_txstatus_indicate(struct brcmf_fws_info *fws, u8 *data) hslot = brcmf_txstatus_get_field(status, HSLOT); genbit = brcmf_txstatus_get_field(status, GENERATION); - brcmf_fws_lock(fws->drvr, lflags); + brcmf_fws_lock(fws); brcmf_fws_txs_process(fws, flags, hslot, genbit); - brcmf_fws_unlock(fws->drvr, lflags); + brcmf_fws_unlock(fws); return BRCMF_FWS_RET_OK_NOSCHEDULE; } @@ -1442,7 +1438,6 @@ static int brcmf_fws_notify_credit_map(struct brcmf_if *ifp, { struct brcmf_fws_info *fws = ifp->drvr->fws; int i; - ulong flags; u8 *credits = data; if (e->datalen < BRCMF_FWS_FIFO_COUNT) { @@ -1455,7 +1450,7 @@ static int brcmf_fws_notify_credit_map(struct brcmf_if *ifp, fws->creditmap_received = true; brcmf_dbg(TRACE, "enter: credits %pM\n", credits); - brcmf_fws_lock(ifp->drvr, flags); + brcmf_fws_lock(fws); for (i = 0; i < ARRAY_SIZE(fws->fifo_credit); i++) { if (*credits) fws->fifo_credit_map |= 1 << i; @@ -1464,7 +1459,7 @@ static int brcmf_fws_notify_credit_map(struct brcmf_if *ifp, fws->fifo_credit[i] = *credits++; } brcmf_fws_schedule_deq(fws); - brcmf_fws_unlock(ifp->drvr, flags); + brcmf_fws_unlock(fws); return 0; } @@ -1473,12 +1468,11 @@ static int brcmf_fws_notify_bcmc_credit_support(struct brcmf_if *ifp, void *data) { struct brcmf_fws_info *fws = ifp->drvr->fws; - ulong flags; - brcmf_fws_lock(ifp->drvr, flags); + brcmf_fws_lock(fws); if (fws) fws->bcmc_credit_check = true; - brcmf_fws_unlock(ifp->drvr, flags); + brcmf_fws_unlock(fws); return 0; } @@ -1702,17 +1696,22 @@ static int brcmf_fws_commit_skb(struct brcmf_fws_info *fws, int fifo, return PTR_ERR(entry); brcmf_fws_precommit_skb(fws, fifo, skb); + entry->transit_count++; + if (entry->suppressed) + entry->suppr_transit_count++; + brcmf_fws_unlock(fws); rc = brcmf_bus_txdata(bus, skb); + brcmf_fws_lock(fws); brcmf_dbg(DATA, "%s flags %X htod %X bus_tx %d\n", entry->name, skcb->if_flags, skcb->htod, rc); if (rc < 0) { + entry->transit_count--; + if (entry->suppressed) + entry->suppr_transit_count--; brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb); goto rollback; } - entry->transit_count++; - if (entry->suppressed) - entry->suppr_transit_count++; fws->stats.pkt2bus++; fws->stats.send_pkts[fifo]++; if (brcmf_skb_if_flags_get_field(skb, REQUESTED)) @@ -1749,7 +1748,6 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) struct brcmf_fws_info *fws = drvr->fws; struct brcmf_skbuff_cb *skcb = brcmf_skbcb(skb); struct ethhdr *eh = (struct ethhdr *)(skb->data); - ulong flags; int fifo = BRCMF_FWS_FIFO_BCMC; bool multicast = is_multicast_ether_addr(eh->h_dest); bool pae = eh->h_proto == htons(ETH_P_PAE); @@ -1770,7 +1768,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) if (!multicast) fifo = brcmf_fws_prio2fifo[skb->priority]; - brcmf_fws_lock(drvr, flags); + brcmf_fws_lock(fws); if (fifo != BRCMF_FWS_FIFO_AC_BE && fifo < BRCMF_FWS_FIFO_BCMC) fws->borrow_defer_timestamp = jiffies + BRCMF_FWS_BORROW_DEFER_PERIOD; @@ -1790,7 +1788,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) } brcmu_pkt_buf_free_skb(skb); } - brcmf_fws_unlock(drvr, flags); + brcmf_fws_unlock(fws); return 0; } @@ -1825,17 +1823,16 @@ void brcmf_fws_add_interface(struct brcmf_if *ifp) void brcmf_fws_del_interface(struct brcmf_if *ifp) { struct brcmf_fws_mac_descriptor *entry = ifp->fws_desc; - ulong flags; if (!entry) return; - brcmf_fws_lock(ifp->drvr, flags); + brcmf_fws_lock(ifp->drvr->fws); ifp->fws_desc = NULL; brcmf_dbg(TRACE, "deleting %s\n", entry->name); brcmf_fws_macdesc_deinit(entry); brcmf_fws_cleanup(ifp->drvr->fws, ifp->ifidx); - brcmf_fws_unlock(ifp->drvr, flags); + brcmf_fws_unlock(ifp->drvr->fws); } static void brcmf_fws_dequeue_worker(struct work_struct *worker) @@ -1843,7 +1840,6 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker) struct brcmf_fws_info *fws; struct brcmf_pub *drvr; struct sk_buff *skb; - ulong flags; int fifo; u32 hslot; u32 ifidx; @@ -1852,7 +1848,7 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker) fws = container_of(worker, struct brcmf_fws_info, fws_dequeue_work); drvr = fws->drvr; - brcmf_fws_lock(drvr, flags); + brcmf_fws_lock(fws); for (fifo = BRCMF_FWS_FIFO_BCMC; fifo >= 0 && !fws->bus_flow_blocked; fifo--) { if (!brcmf_fws_fc_active(fws)) { @@ -1865,7 +1861,9 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker) INDEX); brcmf_proto_hdrpush(drvr, ifidx, 0, skb); /* Use bus module to send data frame */ + brcmf_fws_unlock(fws); ret = brcmf_bus_txdata(drvr->bus_if, skb); + brcmf_fws_lock(fws); if (ret < 0) brcmf_txfinalize(drvr, skb, false); if (fws->bus_flow_blocked) @@ -1900,7 +1898,7 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker) } } } - brcmf_fws_unlock(drvr, flags); + brcmf_fws_unlock(fws); } int brcmf_fws_init(struct brcmf_pub *drvr) @@ -1909,8 +1907,6 @@ int brcmf_fws_init(struct brcmf_pub *drvr) u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS; int rc; - spin_lock_init(&drvr->fws_spinlock); - drvr->fws = kzalloc(sizeof(*(drvr->fws)), GFP_KERNEL); if (!drvr->fws) { rc = -ENOMEM; @@ -1918,6 +1914,9 @@ int brcmf_fws_init(struct brcmf_pub *drvr) } fws = drvr->fws; + + spin_lock_init(&fws->spinlock); + /* set linkage back */ fws->drvr = drvr; fws->fcmode = fcmode; @@ -1986,7 +1985,6 @@ fail: void brcmf_fws_deinit(struct brcmf_pub *drvr) { struct brcmf_fws_info *fws = drvr->fws; - ulong flags; if (!fws) return; @@ -1995,10 +1993,10 @@ void brcmf_fws_deinit(struct brcmf_pub *drvr) destroy_workqueue(drvr->fws->fws_wq); /* cleanup */ - brcmf_fws_lock(drvr, flags); + brcmf_fws_lock(fws); brcmf_fws_cleanup(fws, -1); drvr->fws = NULL; - brcmf_fws_unlock(drvr, flags); + brcmf_fws_unlock(fws); /* free top structure */ kfree(fws); @@ -2014,17 +2012,16 @@ bool brcmf_fws_fc_active(struct brcmf_fws_info *fws) void brcmf_fws_bustxfail(struct brcmf_fws_info *fws, struct sk_buff *skb) { - ulong flags; u32 hslot; if (brcmf_skbcb(skb)->state == BRCMF_FWS_SKBSTATE_TIM) { brcmu_pkt_buf_free_skb(skb); return; } - brcmf_fws_lock(fws->drvr, flags); + brcmf_fws_lock(fws); hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT); brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED, hslot, 0); - brcmf_fws_unlock(fws->drvr, flags); + brcmf_fws_unlock(fws); } void brcmf_fws_bus_blocked(struct brcmf_pub *drvr, bool flow_blocked) -- cgit v0.10.2 From 2ee8382fc6c763c76396a6aaff77a27089eed3aa Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 10 Aug 2013 12:27:24 +0200 Subject: brcmfmac: ignore IF event if firmware indicates it Not every IF event from the firmware needs to result in a related interface, netdev or wdev, on the host. This is indicated in the event message. Handle that flag and effectively ignore the firmware event. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 1273dfd..2eb9e64 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -194,6 +194,8 @@ #define BRCMF_E_IF_DEL 2 #define BRCMF_E_IF_CHANGE 3 +#define BRCMF_E_IF_FLAG_NOIF 1 + #define BRCMF_E_IF_ROLE_STA 0 #define BRCMF_E_IF_ROLE_AP 1 #define BRCMF_E_IF_ROLE_WDS 2 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index 83ee53a..fad77dd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -185,6 +185,10 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, ifevent->action, ifevent->ifidx, ifevent->bssidx, ifevent->flags, ifevent->role); + if (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) { + brcmf_dbg(EVENT, "event can be ignored\n"); + return; + } if (ifevent->ifidx >= BRCMF_MAX_IFS) { brcmf_err("invalid interface index: %u\n", ifevent->ifidx); -- cgit v0.10.2 From 89c2f382fff4ec8adf04264925e07e951d0552ce Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 10 Aug 2013 12:27:25 +0200 Subject: brcmfmac: add support for manual TDLS operations Implement the .tdls_oper() callback and indicate TDLS support in the wiphy flags. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 665ef69..ecabb04 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -69,4 +69,25 @@ struct brcmf_fil_bss_enable_le { __le32 enable; }; +/** + * struct tdls_iovar - common structure for tdls iovars. + * + * @ea: ether address of peer station. + * @mode: mode value depending on specific tdls iovar. + * @chanspec: channel specification. + * @pad: unused (for future use). + */ +struct brcmf_tdls_iovar_le { + u8 ea[ETH_ALEN]; /* Station address */ + u8 mode; /* mode: depends on iovar */ + __le16 chanspec; + __le32 pad; /* future */ +}; + +enum brcmf_tdls_manual_ep_ops { + BRCMF_TDLS_MANUAL_EP_CREATE = 1, + BRCMF_TDLS_MANUAL_EP_DELETE = 3, + BRCMF_TDLS_MANUAL_EP_DISCOVERY = 6 +}; + #endif /* FWIL_TYPES_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c3dfea3..0370e44 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4126,6 +4126,53 @@ static void brcmf_cfg80211_crit_proto_stop(struct wiphy *wiphy, clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status); } +static int brcmf_convert_nl80211_tdls_oper(enum nl80211_tdls_operation oper) +{ + int ret; + + switch (oper) { + case NL80211_TDLS_DISCOVERY_REQ: + ret = BRCMF_TDLS_MANUAL_EP_DISCOVERY; + break; + case NL80211_TDLS_SETUP: + ret = BRCMF_TDLS_MANUAL_EP_CREATE; + break; + case NL80211_TDLS_TEARDOWN: + ret = BRCMF_TDLS_MANUAL_EP_DELETE; + break; + default: + brcmf_err("unsupported operation: %d\n", oper); + ret = -EOPNOTSUPP; + } + return ret; +} + +static int brcmf_cfg80211_tdls_oper(struct wiphy *wiphy, + struct net_device *ndev, u8 *peer, + enum nl80211_tdls_operation oper) +{ + struct brcmf_if *ifp; + struct brcmf_tdls_iovar_le info; + int ret = 0; + + ret = brcmf_convert_nl80211_tdls_oper(oper); + if (ret < 0) + return ret; + + ifp = netdev_priv(ndev); + memset(&info, 0, sizeof(info)); + info.mode = (u8)ret; + if (peer) + memcpy(info.ea, peer, ETH_ALEN); + + ret = brcmf_fil_iovar_data_set(ifp, "tdls_endpoint", + &info, sizeof(info)); + if (ret < 0) + brcmf_err("tdls_endpoint iovar failed: ret=%d\n", ret); + + return ret; +} + static struct cfg80211_ops wl_cfg80211_ops = { .add_virtual_intf = brcmf_cfg80211_add_iface, .del_virtual_intf = brcmf_cfg80211_del_iface, @@ -4164,6 +4211,7 @@ static struct cfg80211_ops wl_cfg80211_ops = { .stop_p2p_device = brcmf_p2p_stop_device, .crit_proto_start = brcmf_cfg80211_crit_proto_start, .crit_proto_stop = brcmf_cfg80211_crit_proto_stop, + .tdls_oper = brcmf_cfg80211_tdls_oper, CFG80211_TESTMODE_CMD(brcmf_cfg80211_testmode) }; @@ -4285,7 +4333,8 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT | WIPHY_FLAG_OFFCHAN_TX | - WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL | + WIPHY_FLAG_SUPPORTS_TDLS; wiphy->mgmt_stypes = brcmf_txrx_stypes; wiphy->max_remain_on_channel_duration = 5000; brcmf_wiphy_pno_params(wiphy); @@ -4906,6 +4955,12 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, goto cfg80211_p2p_attach_out; } + err = brcmf_fil_iovar_int_set(ifp, "tdls_enable", 1); + if (err) { + brcmf_dbg(INFO, "TDLS not enabled (%d)\n", err); + wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_TDLS; + } + err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_VERSION, &io_type); if (err) { -- cgit v0.10.2 From b05e92545d9582be15699e4a33d0f93ac00b37dd Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Sat, 10 Aug 2013 12:27:26 +0200 Subject: brcmfmac: abstract tx packet processing functions Abstract brcmf_sdio_txpkt_prep and brcmf_sdio_txpkt_postp as a preparation of chained tx packets for host side tx glomming. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index e3f3c48..e13b1a6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -592,6 +592,7 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, uint flags, u8 *buf, uint nbytes) { struct sk_buff *mypkt; + struct sk_buff_head pktq; int err; mypkt = brcmu_pkt_buf_get_skb(nbytes); @@ -602,7 +603,10 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, } memcpy(mypkt->data, buf, nbytes); - err = brcmf_sdcard_send_pkt(sdiodev, addr, fn, flags, mypkt); + __skb_queue_head_init(&pktq); + __skb_queue_tail(&pktq, mypkt); + err = brcmf_sdcard_send_pkt(sdiodev, addr, fn, flags, &pktq); + __skb_dequeue_tail(&pktq); brcmu_pkt_buf_free_skb(mypkt); return err; @@ -611,22 +615,18 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, int brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff *pkt) + uint flags, struct sk_buff_head *pktq) { uint width; int err = 0; - struct sk_buff_head pkt_list; brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n", - fn, addr, pkt->len); + fn, addr, pktq->qlen); width = (flags & SDIO_REQ_4BYTE) ? 4 : 2; brcmf_sdio_addrprep(sdiodev, width, &addr); - skb_queue_head_init(&pkt_list); - skb_queue_tail(&pkt_list, pkt); - err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, &pkt_list); - skb_dequeue_tail(&pkt_list); + err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, pktq); return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index db31312..aa4caca 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -510,7 +510,6 @@ struct brcmf_sdio { #ifdef DEBUG static int qcount[NUMPRIO]; -static int tx_packets[NUMPRIO]; #endif /* DEBUG */ #define DEFAULT_SDIO_DRIVE_STRENGTH 6 /* in milliamps */ @@ -1759,85 +1758,185 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus) return; } +/* flag marking a dummy skb added for DMA alignment requirement */ +#define DUMMY_SKB_FLAG 0x10000 +/* bit mask of data length chopped from the previous packet */ +#define DUMMY_SKB_CHOP_LEN_MASK 0xffff +/** + * brcmf_sdio_txpkt_prep - packet preparation for transmit + * @bus: brcmf_sdio structure pointer + * @pktq: packet list pointer + * @chan: virtual channel to transmit the packet + * + * Processes to be applied to the packet + * - Align data buffer pointer + * - Align data buffer length + * - Prepare header + * Return: negative value if there is error + */ +static int +brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, + uint chan) +{ + u16 head_pad, tail_pad, tail_chop, pkt_len; + u16 head_align, sg_align; + u32 sw_header; + int ntail; + struct sk_buff *pkt_next, *pkt_new; + u8 *dat_buf; + unsigned blksize = bus->sdiodev->func[SDIO_FUNC_2]->cur_blksize; + + /* SDIO ADMA requires at least 32 bit alignment */ + head_align = 4; + sg_align = 4; + if (bus->sdiodev->pdata) { + head_align = bus->sdiodev->pdata->sd_head_align > 4 ? + bus->sdiodev->pdata->sd_head_align : 4; + sg_align = bus->sdiodev->pdata->sd_sgentry_align > 4 ? + bus->sdiodev->pdata->sd_sgentry_align : 4; + } + /* sg entry alignment should be a divisor of block size */ + WARN_ON(blksize % sg_align); + + pkt_next = pktq->next; + dat_buf = (u8 *)(pkt_next->data); + + /* Check head padding */ + head_pad = ((unsigned long)dat_buf % head_align); + if (head_pad) { + if (skb_headroom(pkt_next) < head_pad) { + bus->sdiodev->bus_if->tx_realloc++; + head_pad = 0; + if (skb_cow(pkt_next, head_pad)) + return -ENOMEM; + } + skb_push(pkt_next, head_pad); + dat_buf = (u8 *)(pkt_next->data); + memset(dat_buf, 0, head_pad + SDPCM_HDRLEN); + } + + /* Check tail padding */ + pkt_new = NULL; + tail_chop = pkt_next->len % sg_align; + tail_pad = sg_align - tail_chop; + tail_pad += blksize - (pkt_next->len + tail_pad) % blksize; + if (skb_tailroom(pkt_next) < tail_pad && pkt_next->len > blksize) { + pkt_new = brcmu_pkt_buf_get_skb(tail_pad + tail_chop); + if (pkt_new == NULL) + return -ENOMEM; + memcpy(pkt_new->data, + pkt_next->data + pkt_next->len - tail_chop, + tail_chop); + *(u32 *)(pkt_new->cb) = DUMMY_SKB_FLAG + tail_chop; + skb_trim(pkt_next, pkt_next->len - tail_chop); + __skb_queue_after(pktq, pkt_next, pkt_new); + } else { + ntail = pkt_next->data_len + tail_pad - + (pkt_next->end - pkt_next->tail); + if (skb_cloned(pkt_next) || ntail > 0) + if (pskb_expand_head(pkt_next, 0, ntail, GFP_ATOMIC)) + return -ENOMEM; + if (skb_linearize(pkt_next)) + return -ENOMEM; + dat_buf = (u8 *)(pkt_next->data); + __skb_put(pkt_next, tail_pad); + } + + /* Now prep the header */ + /* 4 bytes hardware header (frame tag) + * Byte 0~1: Frame length + * Byte 2~3: Checksum, bit-wise inverse of frame length + */ + if (pkt_new) + pkt_len = pkt_next->len + tail_chop; + else + pkt_len = pkt_next->len - tail_pad; + *(__le16 *)dat_buf = cpu_to_le16(pkt_len); + *(((__le16 *)dat_buf) + 1) = cpu_to_le16(~pkt_len); + /* 8 bytes software header + * Byte 0: Tx sequence number + * Byte 1: 4 MSB Channel number + * Byte 2: Reserved + * Byte 3: Data offset + * Byte 4~7: Reserved + */ + sw_header = bus->tx_seq; + sw_header |= ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK); + sw_header |= ((head_pad + SDPCM_HDRLEN) << SDPCM_DOFFSET_SHIFT) & + SDPCM_DOFFSET_MASK; + *(((__le32 *)dat_buf) + 1) = cpu_to_le32(sw_header); + *(((__le32 *)dat_buf) + 2) = 0; + + if (BRCMF_BYTES_ON() && + ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || + (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) + brcmf_dbg_hex_dump(true, pkt_next, pkt_len, "Tx Frame:\n"); + else if (BRCMF_HDRS_ON()) + brcmf_dbg_hex_dump(true, pkt_next, head_pad + SDPCM_HDRLEN, + "Tx Header:\n"); + + return 0; +} + +/** + * brcmf_sdio_txpkt_postp - packet post processing for transmit + * @bus: brcmf_sdio structure pointer + * @pktq: packet list pointer + * + * Processes to be applied to the packet + * - Remove head padding + * - Remove tail padding + */ +static void +brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) +{ + u8 *hdr; + u32 dat_offset; + u32 dummy_flags, chop_len; + struct sk_buff *pkt_next, *tmp, *pkt_prev; + + skb_queue_walk_safe(pktq, pkt_next, tmp) { + dummy_flags = *(u32 *)(pkt_next->cb); + if (dummy_flags & DUMMY_SKB_FLAG) { + chop_len = dummy_flags & DUMMY_SKB_CHOP_LEN_MASK; + if (chop_len) { + pkt_prev = pkt_next->prev; + memcpy(pkt_prev->data + pkt_prev->len, + pkt_next->data, chop_len); + skb_put(pkt_prev, chop_len); + } + __skb_unlink(pkt_next, pktq); + brcmu_pkt_buf_free_skb(pkt_next); + } else { + hdr = pkt_next->data + SDPCM_FRAMETAG_LEN; + dat_offset = le32_to_cpu(*(__le32 *)hdr); + dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >> + SDPCM_DOFFSET_SHIFT; + skb_pull(pkt_next, dat_offset); + } + } +} + /* Writes a HW/SW header into the packet and sends it. */ /* Assumes: (a) header space already there, (b) caller holds lock */ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, uint chan) { int ret; - u8 *frame; - u16 len, pad = 0; - u32 swheader; int i; + struct sk_buff_head localq; brcmf_dbg(TRACE, "Enter\n"); - frame = (u8 *) (pkt->data); - - /* Add alignment padding, allocate new packet if needed */ - pad = ((unsigned long)frame % BRCMF_SDALIGN); - if (pad) { - if (skb_headroom(pkt) < pad) { - brcmf_dbg(INFO, "insufficient headroom %d for %d pad\n", - skb_headroom(pkt), pad); - bus->sdiodev->bus_if->tx_realloc++; - ret = skb_cow(pkt, BRCMF_SDALIGN); - if (ret) - goto done; - pad = ((unsigned long)frame % BRCMF_SDALIGN); - } - skb_push(pkt, pad); - frame = (u8 *) (pkt->data); - memset(frame, 0, pad + SDPCM_HDRLEN); - } - /* precondition: pad < BRCMF_SDALIGN */ - - /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */ - len = (u16) (pkt->len); - *(__le16 *) frame = cpu_to_le16(len); - *(((__le16 *) frame) + 1) = cpu_to_le16(~len); - - /* Software tag: channel, sequence number, data offset */ - swheader = - ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) | bus->tx_seq | - (((pad + - SDPCM_HDRLEN) << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK); - - *(((__le32 *) frame) + 1) = cpu_to_le32(swheader); - *(((__le32 *) frame) + 2) = 0; - -#ifdef DEBUG - tx_packets[pkt->priority]++; -#endif - - brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && - ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || - (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)), - frame, len, "Tx Frame:\n"); - brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && - ((BRCMF_CTL_ON() && - chan == SDPCM_CONTROL_CHANNEL) || - (BRCMF_DATA_ON() && - chan != SDPCM_CONTROL_CHANNEL))) && - BRCMF_HDRS_ON(), - frame, min_t(u16, len, 16), "TxHdr:\n"); - - /* Raise len to next SDIO block to eliminate tail command */ - if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { - u16 pad = bus->blocksize - (len % bus->blocksize); - if ((pad <= bus->roundup) && (pad < bus->blocksize)) - len += pad; - } else if (len % BRCMF_SDALIGN) { - len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN); - } - - /* Some controllers have trouble with odd bytes -- round to even */ - if (len & (ALIGNMENT - 1)) - len = roundup(len, ALIGNMENT); + __skb_queue_head_init(&localq); + __skb_queue_tail(&localq, pkt); + ret = brcmf_sdio_txpkt_prep(bus, &localq, chan); + if (ret) + goto done; sdio_claim_host(bus->sdiodev->func[1]); ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, pkt); + SDIO_FUNC_2, F2SYNC, &localq); bus->sdcnt.f2txdata++; if (ret < 0) { @@ -1868,8 +1967,8 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP; done: - /* restore pkt buffer pointer before calling tx complete routine */ - skb_pull(pkt, SDPCM_HDRLEN + pad); + brcmf_sdio_txpkt_postp(bus, &localq); + __skb_dequeue_tail(&localq); brcmf_txcomplete(bus->sdiodev->dev, pkt, ret == 0); return ret; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index 09786a5..2b5407f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -208,7 +208,7 @@ extern int brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, */ extern int brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, - uint flags, struct sk_buff *pkt); + uint flags, struct sk_buff_head *pktq); extern int brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, uint flags, u8 *buf, uint nbytes); diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h index b717499..e75dcbf 100644 --- a/include/linux/platform_data/brcmfmac-sdio.h +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -94,6 +94,10 @@ void __init brcmfmac_init_pdata(void) * Set this to true if the SDIO host controller has higher align requirement * than 32 bytes for each scatterlist item. * + * sd_head_align: alignment requirement for start of data buffer + * + * sd_sgentry_align: length alignment requirement for each sg entry + * * power_on: This function is called by the brcmfmac when the module gets * loaded. This can be particularly useful for low power devices. The platform * spcific routine may for example decide to power up the complete device. @@ -121,6 +125,8 @@ struct brcmfmac_sdio_platform_data { unsigned int oob_irq_nr; unsigned long oob_irq_flags; bool broken_sg_support; + unsigned short sd_head_align; + unsigned short sd_sgentry_align; void (*power_on)(void); void (*power_off)(void); void (*reset)(void); -- cgit v0.10.2 From cb7f79682a9289634094e2c3b5180611635332f5 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Sat, 10 Aug 2013 12:27:27 +0200 Subject: brcmfmac: remove align from brcmf_bus structure remove align from brcmf_bus since it is only used by sdio bus layer internally Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 289e386..64f4a2b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -350,7 +350,6 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, sdiodev->bus_if = bus_if; bus_if->bus_priv.sdio = sdiodev; - bus_if->align = BRCMF_SDALIGN; dev_set_drvdata(&func->dev, bus_if); dev_set_drvdata(&sdiodev->func[1]->dev, bus_if); sdiodev->dev = &sdiodev->func[1]->dev; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 9249b6d..f7c1985 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -69,7 +69,6 @@ struct brcmf_bus_ops { * @maxctl: maximum size for rxctl request message. * @tx_realloc: number of tx packets realloced for headroom. * @dstats: dongle-based statistical data. - * @align: alignment requirement for the bus. * @dcmd_list: bus/device specific dongle initialization commands. * @chip: device identifier of the dongle chip. * @chiprev: revision of the dongle chip. @@ -84,7 +83,6 @@ struct brcmf_bus { enum brcmf_bus_state state; uint maxctl; unsigned long tx_realloc; - u8 align; u32 chip; u32 chiprev; struct list_head dcmd_list; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index aa4caca..2563875 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1166,7 +1166,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) { u16 dlen, totlen; u8 *dptr, num = 0; - + u32 align = 0; u16 sublen; struct sk_buff *pfirst, *pnext; @@ -1181,6 +1181,11 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) brcmf_dbg(SDIO, "start: glomd %p glom %p\n", bus->glomd, skb_peek(&bus->glom)); + if (bus->sdiodev->pdata) + align = bus->sdiodev->pdata->sd_sgentry_align; + if (align < 4) + align = 4; + /* If there's a descriptor, generate the packet chain */ if (bus->glomd) { pfirst = pnext = NULL; @@ -1204,9 +1209,9 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) pnext = NULL; break; } - if (sublen % BRCMF_SDALIGN) { + if (sublen % align) { brcmf_err("sublen %d not multiple of %d\n", - sublen, BRCMF_SDALIGN); + sublen, align); } totlen += sublen; @@ -1219,7 +1224,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } /* Allocate/chain packet for next subframe */ - pnext = brcmu_pkt_buf_get_skb(sublen + BRCMF_SDALIGN); + pnext = brcmu_pkt_buf_get_skb(sublen + align); if (pnext == NULL) { brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n", num, sublen); @@ -1228,7 +1233,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) skb_queue_tail(&bus->glom, pnext); /* Adhere to start alignment requirements */ - pkt_align(pnext, sublen, BRCMF_SDALIGN); + pkt_align(pnext, sublen, align); } /* If all allocations succeeded, save packet chain @@ -3832,7 +3837,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) struct brcmf_sdio *bus; struct brcmf_bus_dcmd *dlst; u32 dngl_txglom; - u32 dngl_txglomalign; + u32 txglomalign = 0; u8 idx; brcmf_dbg(TRACE, "Enter\n"); @@ -3926,9 +3931,13 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) dlst->param_len = sizeof(u32); } else { /* otherwise, set txglomalign */ - dngl_txglomalign = bus->sdiodev->bus_if->align; + if (sdiodev->pdata) + txglomalign = sdiodev->pdata->sd_sgentry_align; + /* SDIO ADMA requires at least 32 bit alignment */ + if (txglomalign < 4) + txglomalign = 4; dlst->name = "bus:txglomalign"; - dlst->param = (char *)&dngl_txglomalign; + dlst->param = (char *)&txglomalign; dlst->param_len = sizeof(u32); } list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list); -- cgit v0.10.2 From 6bc52319c2c688fdcbb203a4917576ca4cd4d51e Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Sat, 10 Aug 2013 12:27:28 +0200 Subject: brcmfmac: streamline sdio bus header code Streamlining sdio bus specific header related code as preparation for host tx glomming Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 2563875..02ab5cd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -201,13 +201,6 @@ struct rte_console { #define SFC_CRC4WOOS (1 << 2) /* CRC error for write out of sync */ #define SFC_ABORTALL (1 << 3) /* Abort all in-progress frames */ -/* HW frame tag */ -#define SDPCM_FRAMETAG_LEN 4 /* 2 bytes len, 2 bytes check val */ - -/* Total length of frame header for dongle protocol */ -#define SDPCM_HDRLEN (SDPCM_FRAMETAG_LEN + SDPCM_SWHEADER_LEN) -#define SDPCM_RESERVE (SDPCM_HDRLEN + BRCMF_SDALIGN) - /* * Software allocation of To SB Mailbox resources */ @@ -250,38 +243,6 @@ struct rte_console { /* Current protocol version */ #define SDPCM_PROT_VERSION 4 -/* SW frame header */ -#define SDPCM_PACKET_SEQUENCE(p) (((u8 *)p)[0] & 0xff) - -#define SDPCM_CHANNEL_MASK 0x00000f00 -#define SDPCM_CHANNEL_SHIFT 8 -#define SDPCM_PACKET_CHANNEL(p) (((u8 *)p)[1] & 0x0f) - -#define SDPCM_NEXTLEN_OFFSET 2 - -/* Data Offset from SOF (HW Tag, SW Tag, Pad) */ -#define SDPCM_DOFFSET_OFFSET 3 /* Data Offset */ -#define SDPCM_DOFFSET_VALUE(p) (((u8 *)p)[SDPCM_DOFFSET_OFFSET] & 0xff) -#define SDPCM_DOFFSET_MASK 0xff000000 -#define SDPCM_DOFFSET_SHIFT 24 -#define SDPCM_FCMASK_OFFSET 4 /* Flow control */ -#define SDPCM_FCMASK_VALUE(p) (((u8 *)p)[SDPCM_FCMASK_OFFSET] & 0xff) -#define SDPCM_WINDOW_OFFSET 5 /* Credit based fc */ -#define SDPCM_WINDOW_VALUE(p) (((u8 *)p)[SDPCM_WINDOW_OFFSET] & 0xff) - -#define SDPCM_SWHEADER_LEN 8 /* SW header is 64 bits */ - -/* logical channel numbers */ -#define SDPCM_CONTROL_CHANNEL 0 /* Control channel Id */ -#define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication Channel Id */ -#define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv Channel Id */ -#define SDPCM_GLOM_CHANNEL 3 /* For coalesced packets */ -#define SDPCM_TEST_CHANNEL 15 /* Reserved for test/debug packets */ - -#define SDPCM_SEQUENCE_WRAP 256 /* wrap-around val for 8bit frame seq */ - -#define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80) - /* * Shared structure between dongle and the host. * The structure contains pointers to trap or assert information. @@ -396,8 +357,8 @@ struct sdpcm_shared_le { __le32 brpt_addr; }; -/* SDIO read frame info */ -struct brcmf_sdio_read { +/* dongle SDIO bus specific header info */ +struct brcmf_sdio_hdrinfo { u8 seq_num; u8 channel; u16 len; @@ -431,7 +392,7 @@ struct brcmf_sdio { u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN]; u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */ u8 rx_seq; /* Receive sequence number (expected) */ - struct brcmf_sdio_read cur_read; + struct brcmf_sdio_hdrinfo cur_read; /* info of current read frame */ bool rxskip; /* Skip receive (awaiting NAK ACK) */ bool rxpending; /* Data frame pending in dongle */ @@ -1042,18 +1003,64 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) } } -static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header, - struct brcmf_sdio_read *rd, - enum brcmf_sdio_frmtype type) +/** + * brcmfmac sdio bus specific header + * This is the lowest layer header wrapped on the packets transmitted between + * host and WiFi dongle which contains information needed for SDIO core and + * firmware + * + * It consists of 2 parts: hw header and software header + * hardware header (frame tag) - 4 bytes + * Byte 0~1: Frame length + * Byte 2~3: Checksum, bit-wise inverse of frame length + * software header - 8 bytes + * Byte 0: Rx/Tx sequence number + * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag + * Byte 2: Length of next data frame, reserved for Tx + * Byte 3: Data offset + * Byte 4: Flow control bits, reserved for Tx + * Byte 5: Maximum Sequence number allowed by firmware for Tx, N/A for Tx packet + * Byte 6~7: Reserved + */ +#define SDPCM_HWHDR_LEN 4 +#define SDPCM_SWHDR_LEN 8 +#define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN) +#define SDPCM_RESERVE (SDPCM_HDRLEN + BRCMF_SDALIGN) +/* software header */ +#define SDPCM_SEQ_MASK 0x000000ff +#define SDPCM_SEQ_WRAP 256 +#define SDPCM_CHANNEL_MASK 0x00000f00 +#define SDPCM_CHANNEL_SHIFT 8 +#define SDPCM_CONTROL_CHANNEL 0 /* Control */ +#define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication */ +#define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv */ +#define SDPCM_GLOM_CHANNEL 3 /* Coalesced packets */ +#define SDPCM_TEST_CHANNEL 15 /* Test/debug packets */ +#define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80) +#define SDPCM_NEXTLEN_MASK 0x00ff0000 +#define SDPCM_NEXTLEN_SHIFT 16 +#define SDPCM_DOFFSET_MASK 0xff000000 +#define SDPCM_DOFFSET_SHIFT 24 +#define SDPCM_FCMASK_MASK 0x000000ff +#define SDPCM_WINDOW_MASK 0x0000ff00 +#define SDPCM_WINDOW_SHIFT 8 + +static inline u8 brcmf_sdio_getdatoffset(u8 *swheader) +{ + u32 hdrvalue; + hdrvalue = *(u32 *)swheader; + return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT); +} + +static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, + struct brcmf_sdio_hdrinfo *rd, + enum brcmf_sdio_frmtype type) { u16 len, checksum; u8 rx_seq, fc, tx_seq_max; + u32 swheader; - /* - * 4 bytes hardware header (frame tag) - * Byte 0~1: Frame length - * Byte 2~3: Checksum, bit-wise inverse of frame length - */ + /* hw header */ len = get_unaligned_le16(header); checksum = get_unaligned_le16(header + sizeof(u16)); /* All zero means no more to read */ @@ -1082,24 +1089,16 @@ static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header, } rd->len = len; - /* - * 8 bytes hardware header - * Byte 0: Rx sequence number - * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag - * Byte 2: Length of next data frame - * Byte 3: Data offset - * Byte 4: Flow control bits - * Byte 5: Maximum Sequence number allow for Tx - * Byte 6~7: Reserved - */ - if (type == BRCMF_SDIO_FT_SUPER && - SDPCM_GLOMDESC(&header[SDPCM_FRAMETAG_LEN])) { + /* software header */ + header += SDPCM_HWHDR_LEN; + swheader = le32_to_cpu(*(__le32 *)header); + if (type == BRCMF_SDIO_FT_SUPER && SDPCM_GLOMDESC(header)) { brcmf_err("Glom descriptor found in superframe head\n"); rd->len = 0; return -EINVAL; } - rx_seq = SDPCM_PACKET_SEQUENCE(&header[SDPCM_FRAMETAG_LEN]); - rd->channel = SDPCM_PACKET_CHANNEL(&header[SDPCM_FRAMETAG_LEN]); + rx_seq = (u8)(swheader & SDPCM_SEQ_MASK); + rd->channel = (swheader & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT; if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL && type != BRCMF_SDIO_FT_SUPER) { brcmf_err("HW header length too long\n"); @@ -1119,7 +1118,7 @@ static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header, rd->len = 0; return -EINVAL; } - rd->dat_offset = SDPCM_DOFFSET_VALUE(&header[SDPCM_FRAMETAG_LEN]); + rd->dat_offset = brcmf_sdio_getdatoffset(header); if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) { brcmf_err("seq %d: bad data offset\n", rx_seq); bus->sdcnt.rx_badhdr++; @@ -1136,14 +1135,15 @@ static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header, /* no need to check the reset for subframe */ if (type == BRCMF_SDIO_FT_SUB) return 0; - rd->len_nxtfrm = header[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET]; + rd->len_nxtfrm = (swheader & SDPCM_NEXTLEN_MASK) >> SDPCM_NEXTLEN_SHIFT; if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) { /* only warm for NON glom packet */ if (rd->channel != SDPCM_GLOM_CHANNEL) brcmf_err("seq %d: next length error\n", rx_seq); rd->len_nxtfrm = 0; } - fc = SDPCM_FCMASK_VALUE(&header[SDPCM_FRAMETAG_LEN]); + swheader = le32_to_cpu(*(__le32 *)(header + 4)); + fc = swheader & SDPCM_FCMASK_MASK; if (bus->flowcontrol != fc) { if (~bus->flowcontrol & fc) bus->sdcnt.fc_xoff++; @@ -1152,7 +1152,7 @@ static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header, bus->sdcnt.fc_rcvd++; bus->flowcontrol = fc; } - tx_seq_max = SDPCM_WINDOW_VALUE(&header[SDPCM_FRAMETAG_LEN]); + tx_seq_max = (swheader & SDPCM_WINDOW_MASK) >> SDPCM_WINDOW_SHIFT; if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) { brcmf_err("seq %d: max tx seq number error\n", rx_seq); tx_seq_max = bus->tx_seq + 2; @@ -1162,6 +1162,28 @@ static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header, return 0; } +static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length) +{ + *(__le16 *)header = cpu_to_le16(frm_length); + *(((__le16 *)header) + 1) = cpu_to_le16(~frm_length); +} + +static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header, + struct brcmf_sdio_hdrinfo *hd_info) +{ + u32 sw_header; + + brcmf_sdio_update_hwhdr(header, hd_info->len); + + sw_header = bus->tx_seq; + sw_header |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & + SDPCM_CHANNEL_MASK; + sw_header |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & + SDPCM_DOFFSET_MASK; + *(((__le32 *)header) + 1) = cpu_to_le32(sw_header); + *(((__le32 *)header) + 2) = 0; +} + static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) { u16 dlen, totlen; @@ -1173,7 +1195,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) int errcode; u8 doff, sfdoff; - struct brcmf_sdio_read rd_new; + struct brcmf_sdio_hdrinfo rd_new; /* If packets, issue read(s) and send up packet chain */ /* Return sequence numbers consumed? */ @@ -1309,8 +1331,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) rd_new.seq_num = rxseq; rd_new.len = dlen; sdio_claim_host(bus->sdiodev->func[1]); - errcode = brcmf_sdio_hdparser(bus, pfirst->data, &rd_new, - BRCMF_SDIO_FT_SUPER); + errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new, + BRCMF_SDIO_FT_SUPER); sdio_release_host(bus->sdiodev->func[1]); bus->cur_read.len = rd_new.len_nxtfrm << 4; @@ -1328,8 +1350,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) rd_new.len = pnext->len; rd_new.seq_num = rxseq++; sdio_claim_host(bus->sdiodev->func[1]); - errcode = brcmf_sdio_hdparser(bus, pnext->data, &rd_new, - BRCMF_SDIO_FT_SUB); + errcode = brcmf_sdio_hdparse(bus, pnext->data, &rd_new, + BRCMF_SDIO_FT_SUB); sdio_release_host(bus->sdiodev->func[1]); brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), pnext->data, 32, "subframe:\n"); @@ -1361,7 +1383,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) skb_queue_walk_safe(&bus->glom, pfirst, pnext) { dptr = (u8 *) (pfirst->data); sublen = get_unaligned_le16(dptr); - doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]); + doff = brcmf_sdio_getdatoffset(&dptr[SDPCM_HWHDR_LEN]); brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(), dptr, pfirst->len, @@ -1539,7 +1561,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) uint rxleft = 0; /* Remaining number of frames allowed */ int ret; /* Return code from calls */ uint rxcount = 0; /* Total frames read */ - struct brcmf_sdio_read *rd = &bus->cur_read, rd_new; + struct brcmf_sdio_hdrinfo *rd = &bus->cur_read, rd_new; u8 head_read = 0; brcmf_dbg(TRACE, "Enter\n"); @@ -1587,8 +1609,8 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) bus->rxhdr, SDPCM_HDRLEN, "RxHdr:\n"); - if (brcmf_sdio_hdparser(bus, bus->rxhdr, rd, - BRCMF_SDIO_FT_NORMAL)) { + if (brcmf_sdio_hdparse(bus, bus->rxhdr, rd, + BRCMF_SDIO_FT_NORMAL)) { sdio_release_host(bus->sdiodev->func[1]); if (!bus->rxpending) break; @@ -1652,8 +1674,8 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN); rd_new.seq_num = rd->seq_num; sdio_claim_host(bus->sdiodev->func[1]); - if (brcmf_sdio_hdparser(bus, bus->rxhdr, &rd_new, - BRCMF_SDIO_FT_NORMAL)) { + if (brcmf_sdio_hdparse(bus, bus->rxhdr, &rd_new, + BRCMF_SDIO_FT_NORMAL)) { rd->len = 0; brcmu_pkt_buf_free_skb(pkt); } @@ -1697,7 +1719,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) /* Save superframe descriptor and allocate packet frame */ if (rd->channel == SDPCM_GLOM_CHANNEL) { - if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) { + if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_HWHDR_LEN])) { brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n", rd->len); brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), @@ -1783,13 +1805,12 @@ static int brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, uint chan) { - u16 head_pad, tail_pad, tail_chop, pkt_len; - u16 head_align, sg_align; - u32 sw_header; + u16 head_pad, tail_pad, tail_chop, head_align, sg_align; int ntail; struct sk_buff *pkt_next, *pkt_new; u8 *dat_buf; unsigned blksize = bus->sdiodev->func[SDIO_FUNC_2]->cur_blksize; + struct brcmf_sdio_hdrinfo hd_info = {0}; /* SDIO ADMA requires at least 32 bit alignment */ head_align = 4; @@ -1848,34 +1869,18 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, } /* Now prep the header */ - /* 4 bytes hardware header (frame tag) - * Byte 0~1: Frame length - * Byte 2~3: Checksum, bit-wise inverse of frame length - */ if (pkt_new) - pkt_len = pkt_next->len + tail_chop; + hd_info.len = pkt_next->len + tail_chop; else - pkt_len = pkt_next->len - tail_pad; - *(__le16 *)dat_buf = cpu_to_le16(pkt_len); - *(((__le16 *)dat_buf) + 1) = cpu_to_le16(~pkt_len); - /* 8 bytes software header - * Byte 0: Tx sequence number - * Byte 1: 4 MSB Channel number - * Byte 2: Reserved - * Byte 3: Data offset - * Byte 4~7: Reserved - */ - sw_header = bus->tx_seq; - sw_header |= ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK); - sw_header |= ((head_pad + SDPCM_HDRLEN) << SDPCM_DOFFSET_SHIFT) & - SDPCM_DOFFSET_MASK; - *(((__le32 *)dat_buf) + 1) = cpu_to_le32(sw_header); - *(((__le32 *)dat_buf) + 2) = 0; + hd_info.len = pkt_next->len - tail_pad; + hd_info.channel = chan; + hd_info.dat_offset = head_pad + SDPCM_HDRLEN; + brcmf_sdio_hdpack(bus, dat_buf, &hd_info); if (BRCMF_BYTES_ON() && ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) - brcmf_dbg_hex_dump(true, pkt_next, pkt_len, "Tx Frame:\n"); + brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, "Tx Frame:\n"); else if (BRCMF_HDRS_ON()) brcmf_dbg_hex_dump(true, pkt_next, head_pad + SDPCM_HDRLEN, "Tx Header:\n"); @@ -1913,7 +1918,7 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) __skb_unlink(pkt_next, pktq); brcmu_pkt_buf_free_skb(pkt_next); } else { - hdr = pkt_next->data + SDPCM_FRAMETAG_LEN; + hdr = pkt_next->data + SDPCM_HWHDR_LEN; dat_offset = le32_to_cpu(*(__le32 *)hdr); dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT; @@ -1969,7 +1974,7 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, } sdio_release_host(bus->sdiodev->func[1]); if (ret == 0) - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP; + bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; done: brcmf_sdio_txpkt_postp(bus, &localq); @@ -2325,7 +2330,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) } } else { - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP; + bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; } sdio_release_host(bus->sdiodev->func[1]); bus->ctrl_frame_stat = false; @@ -2540,7 +2545,7 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) return ret; } - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP; + bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; return ret; } @@ -2550,13 +2555,13 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) { u8 *frame; u16 len; - u32 swheader; uint retries = 0; u8 doff = 0; int ret = -1; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; + struct brcmf_sdio_hdrinfo hd_info = {0}; brcmf_dbg(TRACE, "Enter\n"); @@ -2595,18 +2600,10 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) brcmf_sdbrcm_bus_sleep(bus, false, false); sdio_release_host(bus->sdiodev->func[1]); - /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */ - *(__le16 *) frame = cpu_to_le16((u16) msglen); - *(((__le16 *) frame) + 1) = cpu_to_le16(~msglen); - - /* Software tag: channel, sequence number, data offset */ - swheader = - ((SDPCM_CONTROL_CHANNEL << SDPCM_CHANNEL_SHIFT) & - SDPCM_CHANNEL_MASK) - | bus->tx_seq | ((doff << SDPCM_DOFFSET_SHIFT) & - SDPCM_DOFFSET_MASK); - put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN); - put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader)); + hd_info.len = (u16)msglen; + hd_info.channel = SDPCM_CONTROL_CHANNEL; + hd_info.dat_offset = doff; + brcmf_sdio_hdpack(bus, frame, &hd_info); if (!data_ok(bus)) { brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n", @@ -3856,7 +3853,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) bus->txbound = BRCMF_TXBOUND; bus->rxbound = BRCMF_RXBOUND; bus->txminmax = BRCMF_TXMINMAX; - bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1; + bus->tx_seq = SDPCM_SEQ_WRAP - 1; INIT_WORK(&bus->datawork, brcmf_sdio_dataworker); bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq"); -- cgit v0.10.2 From 706478cba544584a1f8d515646f8d677d096395e Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Sat, 10 Aug 2013 12:27:29 +0200 Subject: brcmfmac: use configurable sdio bus header length for tx packet Host tx glomming require an extended hardware sdio bus header to store information for dongle. Introduce a variable in struct brcmf_sdio to replace macro SDPCM_HDRLEN Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 02ab5cd..1aa75d5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -461,6 +461,8 @@ struct brcmf_sdio { struct brcmf_sdio_count sdcnt; bool sr_enabled; /* SaveRestore enabled */ bool sleeping; /* SDIO bus sleeping */ + + u8 tx_hdrlen; /* sdio bus header length for tx packet */ }; /* clkstate */ @@ -1025,7 +1027,6 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) #define SDPCM_HWHDR_LEN 4 #define SDPCM_SWHDR_LEN 8 #define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN) -#define SDPCM_RESERVE (SDPCM_HDRLEN + BRCMF_SDALIGN) /* software header */ #define SDPCM_SEQ_MASK 0x000000ff #define SDPCM_SEQ_WRAP 256 @@ -1838,7 +1839,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, } skb_push(pkt_next, head_pad); dat_buf = (u8 *)(pkt_next->data); - memset(dat_buf, 0, head_pad + SDPCM_HDRLEN); + memset(dat_buf, 0, head_pad + bus->tx_hdrlen); } /* Check tail padding */ @@ -1874,7 +1875,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, else hd_info.len = pkt_next->len - tail_pad; hd_info.channel = chan; - hd_info.dat_offset = head_pad + SDPCM_HDRLEN; + hd_info.dat_offset = head_pad + bus->tx_hdrlen; brcmf_sdio_hdpack(bus, dat_buf, &hd_info); if (BRCMF_BYTES_ON() && @@ -1882,7 +1883,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, "Tx Frame:\n"); else if (BRCMF_HDRS_ON()) - brcmf_dbg_hex_dump(true, pkt_next, head_pad + SDPCM_HDRLEN, + brcmf_dbg_hex_dump(true, pkt_next, head_pad + bus->tx_hdrlen, "Tx Header:\n"); return 0; @@ -1989,7 +1990,6 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) u32 intstatus = 0; int ret = 0, prec_out; uint cnt = 0; - uint datalen; u8 tx_prec_map; brcmf_dbg(TRACE, "Enter\n"); @@ -2005,7 +2005,6 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) break; } spin_unlock_bh(&bus->txqlock); - datalen = pkt->len - SDPCM_HDRLEN; ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL); @@ -2392,7 +2391,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) datalen = pkt->len; /* Add space for the header */ - skb_push(pkt, SDPCM_HDRLEN); + skb_push(pkt, bus->tx_hdrlen); /* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */ prec = prio2prec((pkt->priority & PRIOMASK)); @@ -2405,7 +2404,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) /* Priority based enq */ spin_lock_irqsave(&bus->txqlock, flags); if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) { - skb_pull(pkt, SDPCM_HDRLEN); + skb_pull(pkt, bus->tx_hdrlen); brcmf_err("out of bus->txq !!!\n"); ret = -ENOSR; } else { @@ -2566,8 +2565,8 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) brcmf_dbg(TRACE, "Enter\n"); /* Back the pointer to make a room for bus header */ - frame = msg - SDPCM_HDRLEN; - len = (msglen += SDPCM_HDRLEN); + frame = msg - bus->tx_hdrlen; + len = (msglen += bus->tx_hdrlen); /* Add alignment padding (optional for ctl frames) */ doff = ((unsigned long)frame % BRCMF_SDALIGN); @@ -2575,10 +2574,10 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) frame -= doff; len += doff; msglen += doff; - memset(frame, 0, doff + SDPCM_HDRLEN); + memset(frame, 0, doff + bus->tx_hdrlen); } /* precondition: doff < BRCMF_SDALIGN */ - doff += SDPCM_HDRLEN; + doff += bus->tx_hdrlen; /* Round send length to next SDIO block */ if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { @@ -3895,8 +3894,11 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) bus->sdiodev->bus_if->chip = bus->ci->chip; bus->sdiodev->bus_if->chiprev = bus->ci->chiprev; - /* Attach to the brcmf/OS/network interface */ - ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev); + /* default sdio bus header length for tx packet */ + bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; + + /* Attach to the common layer, reserve hdr space */ + ret = brcmf_attach(bus->tx_hdrlen, bus->sdiodev->dev); if (ret != 0) { brcmf_err("brcmf_attach failed\n"); goto fail; -- cgit v0.10.2 From e96542e55a2aacf4bdeccfe2f17b77c4895b4df2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 10 Aug 2013 15:59:15 +0200 Subject: ath9k: fix rx descriptor related race condition Similar to a race condition that exists in the tx path, the hardware might re-read the 'next' pointer of a descriptor of the last completed frame. This only affects non-EDMA (pre-AR93xx) devices. To deal with this race, defer clearing and re-linking a completed rx descriptor until the next one has been processed. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 505c615..0d69b13 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -79,10 +79,6 @@ struct ath_config { sizeof(struct ath_buf_state)); \ } while (0) -#define ATH_RXBUF_RESET(_bf) do { \ - (_bf)->bf_stale = false; \ - } while (0) - /** * enum buffer_type - Buffer type flags * @@ -315,6 +311,7 @@ struct ath_rx { struct ath_descdma rxdma; struct ath_rx_edma rx_edma[ATH9K_RX_QUEUE_MAX]; + struct ath_buf *buf_hold; struct sk_buff *frag; u32 ampdu_ref; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 62dff97..2dd851a 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -42,8 +42,6 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) struct ath_desc *ds; struct sk_buff *skb; - ATH_RXBUF_RESET(bf); - ds = bf->bf_desc; ds->ds_link = 0; /* link to null */ ds->ds_data = bf->bf_buf_addr; @@ -70,6 +68,14 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) sc->rx.rxlink = &ds->ds_link; } +static void ath_rx_buf_relink(struct ath_softc *sc, struct ath_buf *bf) +{ + if (sc->rx.buf_hold) + ath_rx_buf_link(sc, sc->rx.buf_hold); + + sc->rx.buf_hold = bf; +} + static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) { /* XXX block beacon interrupts */ @@ -117,7 +123,6 @@ static bool ath_rx_edma_buf_link(struct ath_softc *sc, skb = bf->bf_mpdu; - ATH_RXBUF_RESET(bf); memset(skb->data, 0, ah->caps.rx_status_len); dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, ah->caps.rx_status_len, DMA_TO_DEVICE); @@ -432,6 +437,7 @@ int ath_startrecv(struct ath_softc *sc) if (list_empty(&sc->rx.rxbuf)) goto start_recv; + sc->rx.buf_hold = NULL; sc->rx.rxlink = NULL; list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list) { ath_rx_buf_link(sc, bf); @@ -677,6 +683,9 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, } bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + if (bf == sc->rx.buf_hold) + return NULL; + ds = bf->bf_desc; /* @@ -1387,7 +1396,7 @@ requeue: if (edma) { ath_rx_edma_buf_link(sc, qtype); } else { - ath_rx_buf_link(sc, bf); + ath_rx_buf_relink(sc, bf); ath9k_hw_rxena(ah); } } while (1); -- cgit v0.10.2 From 50676b811148314f43f0d874502fe9ac5f7d686d Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 10 Aug 2013 15:59:16 +0200 Subject: ath9k: shrink a few data structures by reordering fields Also reduce the size of a few fields where possible Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 0d69b13..7b1d036 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -72,7 +72,6 @@ struct ath_config { /*************************/ #define ATH_TXBUF_RESET(_bf) do { \ - (_bf)->bf_stale = false; \ (_bf)->bf_lastbf = NULL; \ (_bf)->bf_next = NULL; \ memset(&((_bf)->bf_state), 0, \ @@ -192,10 +191,10 @@ struct ath_txq { struct ath_atx_ac { struct ath_txq *txq; - int sched; struct list_head list; struct list_head tid_q; bool clear_ps_filter; + bool sched; }; struct ath_frame_info { @@ -212,6 +211,7 @@ struct ath_buf_state { u8 bf_type; u8 bfs_paprd; u8 ndelim; + bool stale; u16 seqno; unsigned long bfs_paprd_timestamp; }; @@ -225,7 +225,6 @@ struct ath_buf { void *bf_desc; /* virtual addr of desc */ dma_addr_t bf_daddr; /* physical addr of desc */ dma_addr_t bf_buf_addr; /* physical addr of data buffer, for DMA */ - bool bf_stale; struct ieee80211_tx_rate rates[4]; struct ath_buf_state bf_state; }; @@ -237,13 +236,14 @@ struct ath_atx_tid { struct ath_node *an; struct ath_atx_ac *ac; unsigned long tx_buf[BITS_TO_LONGS(ATH_TID_MAX_BUFS)]; - int bar_index; u16 seq_start; u16 seq_next; u16 baw_size; - int tidno; + u8 tidno; int baw_head; /* first un-acked tx buffer */ int baw_tail; /* next unused tx buffer slot */ + + s8 bar_index; bool sched; bool paused; bool active; @@ -255,10 +255,10 @@ struct ath_node { struct ieee80211_vif *vif; /* interface with which we're associated */ struct ath_atx_tid tid[IEEE80211_NUM_TIDS]; struct ath_atx_ac ac[IEEE80211_NUM_ACS]; - int ps_key; u16 maxampdu; u8 mpdudensity; + s8 ps_key; bool sleeping; bool no_ps_filter; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index d8dfb3e..4fc80e3 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -493,7 +493,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, while (bf) { bf_next = bf->bf_next; - if (!bf->bf_stale || bf_next != NULL) + if (!bf->bf_state.stale || bf_next != NULL) list_move_tail(&bf->list, &bf_head); ath_tx_complete_buf(sc, bf, txq, &bf_head, ts, 0); @@ -586,7 +586,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, * not a holding desc. */ INIT_LIST_HEAD(&bf_head); - if (bf_next != NULL || !bf_last->bf_stale) + if (bf_next != NULL || !bf_last->bf_state.stale) list_move_tail(&bf->list, &bf_head); if (!txpending) { @@ -610,7 +610,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, ieee80211_sta_eosp(sta); } /* retry the un-acked ones */ - if (bf->bf_next == NULL && bf_last->bf_stale) { + if (bf->bf_next == NULL && bf_last->bf_state.stale) { struct ath_buf *tbf; tbf = ath_clone_txbuf(sc, bf_last); @@ -1734,7 +1734,7 @@ static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, while (!list_empty(list)) { bf = list_first_entry(list, struct ath_buf, list); - if (bf->bf_stale) { + if (bf->bf_state.stale) { list_del(&bf->list); ath_tx_return_buffer(sc, bf); @@ -2490,7 +2490,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) * it with the STALE flag. */ bf_held = NULL; - if (bf->bf_stale) { + if (bf->bf_state.stale) { bf_held = bf; if (list_is_last(&bf_held->list, &txq->axq_q)) break; @@ -2514,7 +2514,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) * however leave the last descriptor back as the holding * descriptor for hw. */ - lastbf->bf_stale = true; + lastbf->bf_state.stale = true; INIT_LIST_HEAD(&bf_head); if (!list_is_singular(&lastbf->list)) list_cut_position(&bf_head, @@ -2585,7 +2585,7 @@ void ath_tx_edma_tasklet(struct ath_softc *sc) } bf = list_first_entry(fifo_list, struct ath_buf, list); - if (bf->bf_stale) { + if (bf->bf_state.stale) { list_del(&bf->list); ath_tx_return_buffer(sc, bf); bf = list_first_entry(fifo_list, struct ath_buf, list); @@ -2607,7 +2607,7 @@ void ath_tx_edma_tasklet(struct ath_softc *sc) ath_tx_txqaddbuf(sc, txq, &bf_q, true); } } else { - lastbf->bf_stale = true; + lastbf->bf_state.stale = true; if (bf != lastbf) list_cut_position(&bf_head, fifo_list, lastbf->list.prev); -- cgit v0.10.2 From f5bde5b8524fb2b8584af3750dbffda6557234e6 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 13 Aug 2013 12:33:26 +0200 Subject: ath9k: remove ath9k_sta_remove_debugfs mac80211 uses debugfs_remove_recursive, so there's no need for the driver to do an explicit cleanup of its sta debugfs entry. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 7b1d036..df1c495 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -262,10 +262,6 @@ struct ath_node { bool sleeping; bool no_ps_filter; - -#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS) - struct dentry *node_stat; -#endif }; struct ath_tx_control { diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index c10cec5..e5c8333 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -1725,17 +1725,7 @@ void ath9k_sta_add_debugfs(struct ieee80211_hw *hw, struct dentry *dir) { struct ath_node *an = (struct ath_node *)sta->drv_priv; - an->node_stat = debugfs_create_file("node_stat", S_IRUGO, - dir, an, &fops_node_stat); -} - -void ath9k_sta_remove_debugfs(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct dentry *dir) -{ - struct ath_node *an = (struct ath_node *)sta->drv_priv; - debugfs_remove(an->node_stat); + debugfs_create_file("node_stat", S_IRUGO, dir, an, &fops_node_stat); } /* Ethtool support for get-stats */ diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 01c5c6a..6e1556f 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -292,10 +292,6 @@ void ath9k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir); -void ath9k_sta_remove_debugfs(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct dentry *dir); void ath_debug_send_fft_sample(struct ath_softc *sc, struct fft_sample_tlv *fft_sample); void ath9k_debug_stat_ant(struct ath_softc *sc, diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 911744f..0bee105 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2364,7 +2364,6 @@ struct ieee80211_ops ath9k_ops = { #if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS) .sta_add_debugfs = ath9k_sta_add_debugfs, - .sta_remove_debugfs = ath9k_sta_remove_debugfs, #endif .sw_scan_start = ath9k_sw_scan_start, .sw_scan_complete = ath9k_sw_scan_complete, -- cgit v0.10.2 From ca6d4a74c4dea24277d4ce2df4940da6003a2a16 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 13 Aug 2013 12:33:27 +0200 Subject: ath9k: simplify debugfs chainmask handling Writing to that file is unnecessary and quirky, the antenna API should be used instead. Use debugfs_create_u8 to allow reading the values. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index e5c8333..c088744 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -88,90 +88,6 @@ static const struct file_operations fops_debug = { #define DMA_BUF_LEN 1024 -static ssize_t read_file_tx_chainmask(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath_softc *sc = file->private_data; - struct ath_hw *ah = sc->sc_ah; - char buf[32]; - unsigned int len; - - len = sprintf(buf, "0x%08x\n", ah->txchainmask); - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -} - -static ssize_t write_file_tx_chainmask(struct file *file, const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath_softc *sc = file->private_data; - struct ath_hw *ah = sc->sc_ah; - unsigned long mask; - char buf[32]; - ssize_t len; - - len = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, len)) - return -EFAULT; - - buf[len] = '\0'; - if (kstrtoul(buf, 0, &mask)) - return -EINVAL; - - ah->txchainmask = mask; - ah->caps.tx_chainmask = mask; - return count; -} - -static const struct file_operations fops_tx_chainmask = { - .read = read_file_tx_chainmask, - .write = write_file_tx_chainmask, - .open = simple_open, - .owner = THIS_MODULE, - .llseek = default_llseek, -}; - - -static ssize_t read_file_rx_chainmask(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath_softc *sc = file->private_data; - struct ath_hw *ah = sc->sc_ah; - char buf[32]; - unsigned int len; - - len = sprintf(buf, "0x%08x\n", ah->rxchainmask); - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -} - -static ssize_t write_file_rx_chainmask(struct file *file, const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ath_softc *sc = file->private_data; - struct ath_hw *ah = sc->sc_ah; - unsigned long mask; - char buf[32]; - ssize_t len; - - len = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, len)) - return -EFAULT; - - buf[len] = '\0'; - if (kstrtoul(buf, 0, &mask)) - return -EINVAL; - - ah->rxchainmask = mask; - ah->caps.rx_chainmask = mask; - return count; -} - -static const struct file_operations fops_rx_chainmask = { - .read = read_file_rx_chainmask, - .write = write_file_rx_chainmask, - .open = simple_open, - .owner = THIS_MODULE, - .llseek = default_llseek, -}; static ssize_t read_file_ani(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -1896,10 +1812,10 @@ int ath9k_init_debug(struct ath_hw *ah) &fops_reset); debugfs_create_file("recv", S_IRUSR, sc->debug.debugfs_phy, sc, &fops_recv); - debugfs_create_file("rx_chainmask", S_IRUSR | S_IWUSR, - sc->debug.debugfs_phy, sc, &fops_rx_chainmask); - debugfs_create_file("tx_chainmask", S_IRUSR | S_IWUSR, - sc->debug.debugfs_phy, sc, &fops_tx_chainmask); + debugfs_create_u8("rx_chainmask", S_IRUSR, sc->debug.debugfs_phy, + &ah->rxchainmask); + debugfs_create_u8("tx_chainmask", S_IRUSR, sc->debug.debugfs_phy, + &ah->txchainmask); debugfs_create_file("ani", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_ani); debugfs_create_bool("paprd", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, -- cgit v0.10.2 From a1c781bb20ac1e03280e420abd47a99eb8bbdd3b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 13 Aug 2013 12:33:28 +0200 Subject: ath9k: avoid accessing MRC registers on single-chain devices They are not implemented, and accessing them might trigger errors Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 39c3730..18a5aa4 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1172,6 +1172,10 @@ skip_ws_det: * is_on == 0 means MRC CCK is OFF (more noise imm) */ bool is_on = param ? 1 : 0; + + if (ah->caps.rx_chainmask == 1) + break; + REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL, AR_PHY_MRC_CCK_ENABLE, is_on); REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL, -- cgit v0.10.2 From 8f536b87950aa5a5c2d29eb684ed6813e1f9e800 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 13 Aug 2013 12:33:29 +0200 Subject: ath9k: simplify ath_tid_drain ath_tid_drain is only called when a station entry is being removed, so there is no point in still tracking BAW state. Remove some unnecessary code and a bogus TODO comment related to this. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 4fc80e3..cb06c1c 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -312,12 +312,6 @@ static void ath_tx_addto_baw(struct ath_softc *sc, struct ath_atx_tid *tid, } } -/* - * TODO: For frame(s) that are in the retry state, we will reuse the - * sequence number(s) without setting the retry bit. The - * alternative is to give up on these and BAR the receiver's window - * forward. - */ static void ath_tid_drain(struct ath_softc *sc, struct ath_txq *txq, struct ath_atx_tid *tid) @@ -341,14 +335,8 @@ static void ath_tid_drain(struct ath_softc *sc, struct ath_txq *txq, } list_add_tail(&bf->list, &bf_head); - - ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); } - - tid->seq_next = tid->seq_start; - tid->baw_tail = tid->baw_head; - tid->bar_index = -1; } static void ath_tx_set_retry(struct ath_softc *sc, struct ath_txq *txq, -- cgit v0.10.2 From 563299d82fb2492e8d2390b94b00b668feebb229 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 13 Aug 2013 12:33:30 +0200 Subject: ath9k: reset buffer stale flag in ath_tx_get_tid_subframe If that flag stays set for a buffer that already ran through the tx path once, it might cause issues in tx completion processing. Better clear it early to ensure that this does not happen Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index cb06c1c..7223e30 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -888,6 +888,8 @@ ath_tx_get_tid_subframe(struct ath_softc *sc, struct ath_txq *txq, bf = fi->bf; if (!fi->bf) bf = ath_tx_setup_buffer(sc, txq, tid, skb); + else + bf->bf_state.stale = false; if (!bf) { __skb_unlink(skb, *q); -- cgit v0.10.2 From 4a68ab100f24eca34c5d79b937df4dbd0cbc0b4a Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Tue, 13 Aug 2013 15:25:32 +0300 Subject: wil6210: let IP stack re-check HW TCP/UDP csum errors Fix for TCP iperf from Windows to Linux stall after about 1sec Hardware reports false errors in some situations: Microsoft IP stack, in violation of RFC 1624, set TCP checksum that should be 0x0 as 0xffff. hardware report Rx csum error. If HW csum absolutely trusted, this frame can be never received, as re-transmitted one will have same csum problem. In addition, it mess up block ack reorder buffer, as if packet dropped, it is not score boarded there. Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index ea1abeb..d505b26 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -416,13 +416,13 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil, */ if (d->dma.status & RX_DMA_STATUS_L4_IDENT) { /* L4 protocol identified, csum calculated */ - if ((d->dma.error & RX_DMA_ERROR_L4_ERR) == 0) { + if ((d->dma.error & RX_DMA_ERROR_L4_ERR) == 0) skb->ip_summed = CHECKSUM_UNNECESSARY; - } else { - wil_err(wil, "Incorrect checksum reported\n"); - kfree_skb(skb); - return NULL; - } + /* If HW reports bad checksum, let IP stack re-check it + * For example, HW don't understand Microsoft IP stack that + * mis-calculates TCP checksum - if it should be 0x0, + * it writes 0xffff in violation of RFC 1624 + */ } ds_bits = wil_rxdesc_ds_bits(d); -- cgit v0.10.2 From 2b721118b7821107757eb1d37af4b60e877b27e7 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 13 Aug 2013 21:10:19 +0200 Subject: ath9k_htc: do not use bulk on EP3 and EP4 If usb auto suspend is enabled or system run in to suspend/resume cycle, ath9k-htc adapter will stop to response. It is reproducible on xhci HCs. Host part of problem: XHCI do timing calculation based on Transfer Type and bInterval, immediately after device was detected. Ath9k-htc try to overwrite this parameters on module probe and some changes in FW, since we do not initiate usb reset from the driver this changes are not took to account. So, before any kind of suspend or reset, host controller will operate with old parameters. Only after suspend/resume and if interface id stay unchanged, new parameters will by applied. Host will send bulk data with no intervals (?), which will cause overflow on FIFO of EP4. Firmware part of problem: By default, ath9k-htc adapters configured with EP3 and EP4 as interrupt endpoints. Current firmware will try to overwrite ConfigDescriptor to make EP3 and EP4 bulk. FIFO for this endpoints stay not reconfigured, so under the hood it is still Int EP. This patch is revert of 4a0e8ecca4ee commit which trying to reduce CPU usage on some systems. Since it will produce more bug as fixes, we will need to find other way to fix it. here is comment from kernel source which has some more explanation: * Some buggy high speed devices have bulk endpoints using * maxpacket sizes other than 512. High speed HCDs may not * be able to handle that particular bug, so let's warn... in our case EP3 and EP4 have maxpacket sizes = 64!!! Signed-off-by: Oleksij Rempel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 5205a36..6d5d716 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -115,10 +115,10 @@ static int hif_usb_send_regout(struct hif_device_usb *hif_dev, cmd->skb = skb; cmd->hif_dev = hif_dev; - usb_fill_bulk_urb(urb, hif_dev->udev, - usb_sndbulkpipe(hif_dev->udev, USB_REG_OUT_PIPE), + usb_fill_int_urb(urb, hif_dev->udev, + usb_sndintpipe(hif_dev->udev, USB_REG_OUT_PIPE), skb->data, skb->len, - hif_usb_regout_cb, cmd); + hif_usb_regout_cb, cmd, 1); usb_anchor_urb(urb, &hif_dev->regout_submitted); ret = usb_submit_urb(urb, GFP_KERNEL); @@ -723,11 +723,11 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) return; } - usb_fill_bulk_urb(urb, hif_dev->udev, - usb_rcvbulkpipe(hif_dev->udev, + usb_fill_int_urb(urb, hif_dev->udev, + usb_rcvintpipe(hif_dev->udev, USB_REG_IN_PIPE), nskb->data, MAX_REG_IN_BUF_SIZE, - ath9k_hif_usb_reg_in_cb, nskb); + ath9k_hif_usb_reg_in_cb, nskb, 1); } resubmit: @@ -909,11 +909,11 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev) goto err_skb; } - usb_fill_bulk_urb(urb, hif_dev->udev, - usb_rcvbulkpipe(hif_dev->udev, + usb_fill_int_urb(urb, hif_dev->udev, + usb_rcvintpipe(hif_dev->udev, USB_REG_IN_PIPE), skb->data, MAX_REG_IN_BUF_SIZE, - ath9k_hif_usb_reg_in_cb, skb); + ath9k_hif_usb_reg_in_cb, skb, 1); /* Anchor URB */ usb_anchor_urb(urb, &hif_dev->reg_in_submitted); @@ -1031,9 +1031,7 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev) static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev) { - struct usb_host_interface *alt = &hif_dev->interface->altsetting[0]; - struct usb_endpoint_descriptor *endp; - int ret, idx; + int ret; ret = ath9k_hif_usb_download_fw(hif_dev); if (ret) { @@ -1043,20 +1041,6 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev) return ret; } - /* On downloading the firmware to the target, the USB descriptor of EP4 - * is 'patched' to change the type of the endpoint to Bulk. This will - * bring down CPU usage during the scan period. - */ - for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) { - endp = &alt->endpoint[idx].desc; - if ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT) { - endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK; - endp->bmAttributes |= USB_ENDPOINT_XFER_BULK; - endp->bInterval = 0; - } - } - /* Alloc URBs */ ret = ath9k_hif_usb_alloc_urbs(hif_dev); if (ret) { @@ -1268,7 +1252,7 @@ static void ath9k_hif_usb_reboot(struct usb_device *udev) if (!buf) return; - ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, USB_REG_OUT_PIPE), + ret = usb_interrupt_msg(udev, usb_sndintpipe(udev, USB_REG_OUT_PIPE), buf, 4, NULL, HZ); if (ret) dev_err(&udev->dev, "ath9k_htc: USB reboot failed\n"); -- cgit v0.10.2 From f6307dda7f0478c721450e6de956fb5c4fdcb6a4 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:09 +0530 Subject: ath9k: Use a subroutine to check for "mybeacon" Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 2dd851a..0c23053 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1160,6 +1160,24 @@ static void ath9k_apply_ampdu_details(struct ath_softc *sc, } } +static bool ath9k_is_mybeacon(struct ath_softc *sc, struct sk_buff *skb) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_hdr *hdr; + + hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len); + + if (ieee80211_is_beacon(hdr->frame_control)) { + RX_STAT_INC(rx_beacons); + if (!is_zero_ether_addr(common->curbssid) && + ether_addr_equal(hdr->addr3, common->curbssid)) + return true; + } + + return false; +} + int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) { struct ath_buf *bf; @@ -1175,7 +1193,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) enum ath9k_rx_qtype qtype; bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA); int dma_type; - u8 rx_status_len = ah->caps.rx_status_len; u64 tsf = 0; u32 tsf_lower = 0; unsigned long flags; @@ -1216,18 +1233,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) else hdr_skb = skb; - hdr = (struct ieee80211_hdr *) (hdr_skb->data + rx_status_len); - rxs = IEEE80211_SKB_RXCB(hdr_skb); - if (ieee80211_is_beacon(hdr->frame_control)) { - RX_STAT_INC(rx_beacons); - if (!is_zero_ether_addr(common->curbssid) && - ether_addr_equal(hdr->addr3, common->curbssid)) - rs.is_mybeacon = true; - else - rs.is_mybeacon = false; - } - else - rs.is_mybeacon = false; + rs.is_mybeacon = ath9k_is_mybeacon(sc, hdr_skb); + + hdr = (struct ieee80211_hdr *) (hdr_skb->data + + ah->caps.rx_status_len); if (ieee80211_is_data_present(hdr->frame_control) && !ieee80211_is_qos_nullfunc(hdr->frame_control)) @@ -1235,6 +1244,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) ath_debug_stat_rx(sc, &rs); + rxs = IEEE80211_SKB_RXCB(hdr_skb); memset(rxs, 0, sizeof(struct ieee80211_rx_status)); rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp; -- cgit v0.10.2 From 0cab329d6037775bda6eee6ed742797c868f09cc Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:10 +0530 Subject: ath9k: Fix phy error handling for DFS Since the DFS code appears to process the phy errors ATH9K_PHYERR_RADAR and ATH9K_PHYERR_FALSE_RADAR_EXT, check for the correct phyerr status in the main RX tasklet routine. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 0c23053..83b3fc5 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1256,10 +1256,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) unlikely(tsf_lower - rs.rs_tstamp > 0x10000000)) rxs->mactime += 0x100000000ULL; - if (rs.rs_phyerr == ATH9K_PHYERR_RADAR) + if (rs.rs_status & ATH9K_RXERR_PHY) { ath9k_dfs_process_phyerr(sc, hdr, &rs, rxs->mactime); - if (rs.rs_status & ATH9K_RXERR_PHY) { if (ath_process_fft(sc, hdr, &rs, rxs->mactime)) { RX_STAT_INC(rx_spectral); goto requeue_drop_frag; -- cgit v0.10.2 From 5871d2d787bc2fc45e43c9f8ecabdd2db37ad666 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:11 +0530 Subject: ath9k: Discard invalid frames early Frames with invalid or zero length can be discarded early, there is no need to check the crypto bits. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 83b3fc5..f8cc2b3 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -764,7 +764,6 @@ static bool ath9k_rx_accept(struct ath_common *common, bool is_mc, is_valid_tkip, strip_mic, mic_error; struct ath_hw *ah = common->ah; __le16 fc; - u8 rx_status_len = ah->caps.rx_status_len; fc = hdr->frame_control; @@ -786,21 +785,6 @@ static bool ath9k_rx_accept(struct ath_common *common, !test_bit(rx_stats->rs_keyix, common->ccmp_keymap)) rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS; - if (!rx_stats->rs_datalen) { - RX_STAT_INC(rx_len_err); - return false; - } - - /* - * rs_status follows rs_datalen so if rs_datalen is too large - * we can take a hint that hardware corrupted it, so ignore - * those frames. - */ - if (rx_stats->rs_datalen > (common->rx_bufsize - rx_status_len)) { - RX_STAT_INC(rx_len_err); - return false; - } - /* Only use error bits from the last fragment */ if (rx_stats->rs_more) return true; @@ -949,11 +933,33 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, struct ath_common *common = ath9k_hw_common(ah); bool discard_current = sc->rx.discard_next; + /* + * Discard corrupt descriptors which are marked in + * ath_get_next_rx_buf(). + */ sc->rx.discard_next = rx_stats->rs_more; if (discard_current) return -EINVAL; /* + * Discard zero-length packets. + */ + if (!rx_stats->rs_datalen) { + RX_STAT_INC(rx_len_err); + return -EINVAL; + } + + /* + * rs_status follows rs_datalen so if rs_datalen is too large + * we can take a hint that hardware corrupted it, so ignore + * those frames. + */ + if (rx_stats->rs_datalen > (common->rx_bufsize - ah->caps.rx_status_len)) { + RX_STAT_INC(rx_len_err); + return -EINVAL; + } + + /* * everything but the rate is checked here, the rate check is done * separately to avoid doing two lookups for a rate for each frame. */ -- cgit v0.10.2 From 4a470647415276d43daf9238a5bd70acc2119555 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:12 +0530 Subject: ath9k: Fix RX crypto processing The keymiss events are valid only in the last descriptor of a packet. Fix this by making sure that we return early in case of chained descriptors. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index f8cc2b3..b04a971 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -785,10 +785,6 @@ static bool ath9k_rx_accept(struct ath_common *common, !test_bit(rx_stats->rs_keyix, common->ccmp_keymap)) rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS; - /* Only use error bits from the last fragment */ - if (rx_stats->rs_more) - return true; - mic_error = is_valid_tkip && !ieee80211_is_ctl(fc) && !ieee80211_has_morefrags(fc) && !(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) && @@ -959,6 +955,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, return -EINVAL; } + /* Only use status info from the last fragment */ + if (rx_stats->rs_more) + return 0; + /* * everything but the rate is checked here, the rate check is done * separately to avoid doing two lookups for a rate for each frame. @@ -966,10 +966,6 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) return -EINVAL; - /* Only use status info from the last fragment */ - if (rx_stats->rs_more) - return 0; - if (ath9k_process_rate(common, hw, rx_stats, rx_status)) return -EINVAL; -- cgit v0.10.2 From e0dd1a960bba04898bb590e96cf33ecbe3bf53e6 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:13 +0530 Subject: ath9k: Fix TSF processing There is no need to calculate the mactime for chained descriptor packets, so make sure that this is done only for the last fragment of valid packets. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index b04a971..9fabd5f 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -913,6 +913,22 @@ static void ath9k_process_rssi(struct ath_common *common, ah->stats.avgbrssi = rssi; } +static void ath9k_process_tsf(struct ath_rx_status *rs, + struct ieee80211_rx_status *rxs, + u64 tsf) +{ + u32 tsf_lower = tsf & 0xffffffff; + + rxs->mactime = (tsf & ~0xffffffffULL) | rs->rs_tstamp; + if (rs->rs_tstamp > tsf_lower && + unlikely(rs->rs_tstamp - tsf_lower > 0x10000000)) + rxs->mactime -= 0x100000000ULL; + + if (rs->rs_tstamp < tsf_lower && + unlikely(tsf_lower - rs->rs_tstamp > 0x10000000)) + rxs->mactime += 0x100000000ULL; +} + /* * For Decrypt or Demic errors, we only mark packet status here and always push * up the frame up to let mac80211 handle the actual error case, be it no @@ -922,7 +938,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, struct ieee80211_hdr *hdr, struct ath_rx_status *rx_stats, struct ieee80211_rx_status *rx_status, - bool *decrypt_error) + bool *decrypt_error, u64 tsf) { struct ieee80211_hw *hw = sc->hw; struct ath_hw *ah = sc->sc_ah; @@ -959,6 +975,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, if (rx_stats->rs_more) return 0; + ath9k_process_tsf(rx_stats, rx_status, tsf); + /* * everything but the rate is checked here, the rate check is done * separately to avoid doing two lookups for a rate for each frame. @@ -1196,7 +1214,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA); int dma_type; u64 tsf = 0; - u32 tsf_lower = 0; unsigned long flags; dma_addr_t new_buf_addr; @@ -1208,7 +1225,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP; tsf = ath9k_hw_gettsf64(ah); - tsf_lower = tsf & 0xffffffff; do { bool decrypt_error = false; @@ -1249,15 +1265,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) rxs = IEEE80211_SKB_RXCB(hdr_skb); memset(rxs, 0, sizeof(struct ieee80211_rx_status)); - rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp; - if (rs.rs_tstamp > tsf_lower && - unlikely(rs.rs_tstamp - tsf_lower > 0x10000000)) - rxs->mactime -= 0x100000000ULL; - - if (rs.rs_tstamp < tsf_lower && - unlikely(tsf_lower - rs.rs_tstamp > 0x10000000)) - rxs->mactime += 0x100000000ULL; - if (rs.rs_status & ATH9K_RXERR_PHY) { ath9k_dfs_process_phyerr(sc, hdr, &rs, rxs->mactime); @@ -1268,7 +1275,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) } retval = ath9k_rx_skb_preprocess(sc, hdr, &rs, rxs, - &decrypt_error); + &decrypt_error, tsf); if (retval) goto requeue_drop_frag; -- cgit v0.10.2 From 3105b67276f2d3b09669e0a2b1337c9d99f573bd Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:14 +0530 Subject: ath9k: Reorder some functions Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 9fabd5f..51e7d16 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -929,6 +929,116 @@ static void ath9k_process_tsf(struct ath_rx_status *rs, rxs->mactime += 0x100000000ULL; } +#ifdef CONFIG_ATH9K_DEBUGFS +static s8 fix_rssi_inv_only(u8 rssi_val) +{ + if (rssi_val == 128) + rssi_val = 0; + return (s8) rssi_val; +} +#endif + +/* returns 1 if this was a spectral frame, even if not handled. */ +static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, + struct ath_rx_status *rs, u64 tsf) +{ +#ifdef CONFIG_ATH9K_DEBUGFS + struct ath_hw *ah = sc->sc_ah; + u8 bins[SPECTRAL_HT20_NUM_BINS]; + u8 *vdata = (u8 *)hdr; + struct fft_sample_ht20 fft_sample; + struct ath_radar_info *radar_info; + struct ath_ht20_mag_info *mag_info; + int len = rs->rs_datalen; + int dc_pos; + u16 length, max_magnitude; + + /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer + * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT + * yet, but this is supposed to be possible as well. + */ + if (rs->rs_phyerr != ATH9K_PHYERR_RADAR && + rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT && + rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL) + return 0; + + /* check if spectral scan bit is set. This does not have to be checked + * if received through a SPECTRAL phy error, but shouldn't hurt. + */ + radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; + if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) + return 0; + + /* Variation in the data length is possible and will be fixed later. + * Note that we only support HT20 for now. + * + * TODO: add HT20_40 support as well. + */ + if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) || + (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1)) + return 1; + + fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; + length = sizeof(fft_sample) - sizeof(fft_sample.tlv); + fft_sample.tlv.length = __cpu_to_be16(length); + + fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq); + fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); + fft_sample.noise = ah->noise; + + switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) { + case 0: + /* length correct, nothing to do. */ + memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS); + break; + case -1: + /* first byte missing, duplicate it. */ + memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1); + bins[0] = vdata[0]; + break; + case 2: + /* MAC added 2 extra bytes at bin 30 and 32, remove them. */ + memcpy(bins, vdata, 30); + bins[30] = vdata[31]; + memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31); + break; + case 1: + /* MAC added 2 extra bytes AND first byte is missing. */ + bins[0] = vdata[0]; + memcpy(&bins[0], vdata, 30); + bins[31] = vdata[31]; + memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32); + break; + default: + return 1; + } + + /* DC value (value in the middle) is the blind spot of the spectral + * sample and invalid, interpolate it. + */ + dc_pos = SPECTRAL_HT20_NUM_BINS / 2; + bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2; + + /* mag data is at the end of the frame, in front of radar_info */ + mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; + + /* copy raw bins without scaling them */ + memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS); + fft_sample.max_exp = mag_info->max_exp & 0xf; + + max_magnitude = spectral_max_magnitude(mag_info->all_bins); + fft_sample.max_magnitude = __cpu_to_be16(max_magnitude); + fft_sample.max_index = spectral_max_index(mag_info->all_bins); + fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); + fft_sample.tsf = __cpu_to_be64(tsf); + + ath_debug_send_fft_sample(sc, &fft_sample.tlv); + return 1; +#else + return 0; +#endif +} + /* * For Decrypt or Demic errors, we only mark packet status here and always push * up the frame up to let mac80211 handle the actual error case, be it no @@ -1052,116 +1162,6 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, rxs->flag &= ~RX_FLAG_DECRYPTED; } -#ifdef CONFIG_ATH9K_DEBUGFS -static s8 fix_rssi_inv_only(u8 rssi_val) -{ - if (rssi_val == 128) - rssi_val = 0; - return (s8) rssi_val; -} -#endif - -/* returns 1 if this was a spectral frame, even if not handled. */ -static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, - struct ath_rx_status *rs, u64 tsf) -{ -#ifdef CONFIG_ATH9K_DEBUGFS - struct ath_hw *ah = sc->sc_ah; - u8 bins[SPECTRAL_HT20_NUM_BINS]; - u8 *vdata = (u8 *)hdr; - struct fft_sample_ht20 fft_sample; - struct ath_radar_info *radar_info; - struct ath_ht20_mag_info *mag_info; - int len = rs->rs_datalen; - int dc_pos; - u16 length, max_magnitude; - - /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer - * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT - * yet, but this is supposed to be possible as well. - */ - if (rs->rs_phyerr != ATH9K_PHYERR_RADAR && - rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT && - rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL) - return 0; - - /* check if spectral scan bit is set. This does not have to be checked - * if received through a SPECTRAL phy error, but shouldn't hurt. - */ - radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; - if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) - return 0; - - /* Variation in the data length is possible and will be fixed later. - * Note that we only support HT20 for now. - * - * TODO: add HT20_40 support as well. - */ - if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) || - (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1)) - return 1; - - fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; - length = sizeof(fft_sample) - sizeof(fft_sample.tlv); - fft_sample.tlv.length = __cpu_to_be16(length); - - fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq); - fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); - fft_sample.noise = ah->noise; - - switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) { - case 0: - /* length correct, nothing to do. */ - memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS); - break; - case -1: - /* first byte missing, duplicate it. */ - memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1); - bins[0] = vdata[0]; - break; - case 2: - /* MAC added 2 extra bytes at bin 30 and 32, remove them. */ - memcpy(bins, vdata, 30); - bins[30] = vdata[31]; - memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31); - break; - case 1: - /* MAC added 2 extra bytes AND first byte is missing. */ - bins[0] = vdata[0]; - memcpy(&bins[0], vdata, 30); - bins[31] = vdata[31]; - memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32); - break; - default: - return 1; - } - - /* DC value (value in the middle) is the blind spot of the spectral - * sample and invalid, interpolate it. - */ - dc_pos = SPECTRAL_HT20_NUM_BINS / 2; - bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2; - - /* mag data is at the end of the frame, in front of radar_info */ - mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; - - /* copy raw bins without scaling them */ - memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS); - fft_sample.max_exp = mag_info->max_exp & 0xf; - - max_magnitude = spectral_max_magnitude(mag_info->all_bins); - fft_sample.max_magnitude = __cpu_to_be16(max_magnitude); - fft_sample.max_index = spectral_max_index(mag_info->all_bins); - fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); - fft_sample.tsf = __cpu_to_be64(tsf); - - ath_debug_send_fft_sample(sc, &fft_sample.tlv); - return 1; -#else - return 0; -#endif -} - static void ath9k_apply_ampdu_details(struct ath_softc *sc, struct ath_rx_status *rs, struct ieee80211_rx_status *rxs) { -- cgit v0.10.2 From 6b87d71c1ad41a3d0402286534909d0dc6285a51 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:15 +0530 Subject: ath9k: Fix PHY error processing Parse the PHY error details only for the last fragment in case descriptors are chained. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 51e7d16..e18adde 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -803,8 +803,6 @@ static bool ath9k_rx_accept(struct ath_common *common, rxs->flag |= RX_FLAG_FAILED_FCS_CRC; mic_error = false; } - if (rx_stats->rs_status & ATH9K_RXERR_PHY) - return false; if ((rx_stats->rs_status & ATH9K_RXERR_DECRYPT) || (!is_mc && (rx_stats->rs_status & ATH9K_RXERR_KEYMISS))) { @@ -1088,6 +1086,18 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, ath9k_process_tsf(rx_stats, rx_status, tsf); /* + * Process PHY errors and return so that the packet + * can be dropped. + */ + if (rx_stats->rs_status & ATH9K_RXERR_PHY) { + ath9k_dfs_process_phyerr(sc, hdr, rx_stats, rx_status->mactime); + if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime)) + RX_STAT_INC(rx_spectral); + + return -EINVAL; + } + + /* * everything but the rate is checked here, the rate check is done * separately to avoid doing two lookups for a rate for each frame. */ @@ -1265,15 +1275,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) rxs = IEEE80211_SKB_RXCB(hdr_skb); memset(rxs, 0, sizeof(struct ieee80211_rx_status)); - if (rs.rs_status & ATH9K_RXERR_PHY) { - ath9k_dfs_process_phyerr(sc, hdr, &rs, rxs->mactime); - - if (ath_process_fft(sc, hdr, &rs, rxs->mactime)) { - RX_STAT_INC(rx_spectral); - goto requeue_drop_frag; - } - } - retval = ath9k_rx_skb_preprocess(sc, hdr, &rs, rxs, &decrypt_error, tsf); if (retval) -- cgit v0.10.2 From 5e85a32aca03aba3ce7e7123943b4529d2969a95 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:16 +0530 Subject: ath9k: Fix RX debug statistics The various error bits that ath_debug_stat_rx() checks are valid only for the last descriptor for a chained packet, handle this correctly. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index e18adde..2d0017c 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1084,6 +1084,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, return 0; ath9k_process_tsf(rx_stats, rx_status, tsf); + ath_debug_stat_rx(sc, rx_stats); /* * Process PHY errors and return so that the packet @@ -1270,8 +1271,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) !ieee80211_is_qos_nullfunc(hdr->frame_control)) sc->rx.num_pkts++; - ath_debug_stat_rx(sc, &rs); - rxs = IEEE80211_SKB_RXCB(hdr_skb); memset(rxs, 0, sizeof(struct ieee80211_rx_status)); -- cgit v0.10.2 From a5525d9c8246cad653858044ccfd8a16143e84f6 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:17 +0530 Subject: ath9k: Fix RX packet counter Handle chained descriptors and increment the RX counter only for valid packets. Since this is used only by MCI, use CONFIG_ATH9K_BTCOEX_SUPPORT. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 2d0017c..823b411 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1119,6 +1119,13 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL; sc->rx.discard_next = false; + +#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT + if (ieee80211_is_data_present(hdr->frame_control) && + !ieee80211_is_qos_nullfunc(hdr->frame_control)) + sc->rx.num_pkts++; +#endif + return 0; } @@ -1267,10 +1274,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) hdr = (struct ieee80211_hdr *) (hdr_skb->data + ah->caps.rx_status_len); - if (ieee80211_is_data_present(hdr->frame_control) && - !ieee80211_is_qos_nullfunc(hdr->frame_control)) - sc->rx.num_pkts++; - rxs = IEEE80211_SKB_RXCB(hdr_skb); memset(rxs, 0, sizeof(struct ieee80211_rx_status)); -- cgit v0.10.2 From 6f38482eb0630e0be304d5c4fa0e2e5c0a701e91 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:18 +0530 Subject: ath9k: Fix RX beacon processing Make sure that chained descriptors are handled correctly before the packet is parsed to determine if it is a beacon. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 823b411..090c27e 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1037,13 +1037,28 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, #endif } +static bool ath9k_is_mybeacon(struct ath_softc *sc, struct ieee80211_hdr *hdr) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + + if (ieee80211_is_beacon(hdr->frame_control)) { + RX_STAT_INC(rx_beacons); + if (!is_zero_ether_addr(common->curbssid) && + ether_addr_equal(hdr->addr3, common->curbssid)) + return true; + } + + return false; +} + /* * For Decrypt or Demic errors, we only mark packet status here and always push * up the frame up to let mac80211 handle the actual error case, be it no * decryption key or real decryption error. This let us keep statistics there. */ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, - struct ieee80211_hdr *hdr, + struct sk_buff *skb, struct ath_rx_status *rx_stats, struct ieee80211_rx_status *rx_status, bool *decrypt_error, u64 tsf) @@ -1051,6 +1066,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, struct ieee80211_hw *hw = sc->hw; struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_hdr *hdr; bool discard_current = sc->rx.discard_next; /* @@ -1083,6 +1099,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, if (rx_stats->rs_more) return 0; + hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len); + ath9k_process_tsf(rx_stats, rx_status, tsf); ath_debug_stat_rx(sc, rx_stats); @@ -1105,6 +1123,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) return -EINVAL; + rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr); + if (ath9k_process_rate(common, hw, rx_stats, rx_status)) return -EINVAL; @@ -1198,24 +1218,6 @@ static void ath9k_apply_ampdu_details(struct ath_softc *sc, } } -static bool ath9k_is_mybeacon(struct ath_softc *sc, struct sk_buff *skb) -{ - struct ath_hw *ah = sc->sc_ah; - struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_hdr *hdr; - - hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len); - - if (ieee80211_is_beacon(hdr->frame_control)) { - RX_STAT_INC(rx_beacons); - if (!is_zero_ether_addr(common->curbssid) && - ether_addr_equal(hdr->addr3, common->curbssid)) - return true; - } - - return false; -} - int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) { struct ath_buf *bf; @@ -1225,7 +1227,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) struct ath9k_hw_capabilities *pCap = &ah->caps; struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_hw *hw = sc->hw; - struct ieee80211_hdr *hdr; int retval; struct ath_rx_status rs; enum ath9k_rx_qtype qtype; @@ -1269,15 +1270,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) else hdr_skb = skb; - rs.is_mybeacon = ath9k_is_mybeacon(sc, hdr_skb); - - hdr = (struct ieee80211_hdr *) (hdr_skb->data + - ah->caps.rx_status_len); - rxs = IEEE80211_SKB_RXCB(hdr_skb); memset(rxs, 0, sizeof(struct ieee80211_rx_status)); - retval = ath9k_rx_skb_preprocess(sc, hdr, &rs, rxs, + retval = ath9k_rx_skb_preprocess(sc, hdr_skb, &rs, rxs, &decrypt_error, tsf); if (retval) goto requeue_drop_frag; -- cgit v0.10.2 From eb5f952c31abdd5849fb9005beb3dc4ac734c355 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:19 +0530 Subject: ath9k: Move the RX poll check to preprocess() Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 090c27e..5b84ce4 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1124,6 +1124,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, return -EINVAL; rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr); + if (rx_stats->is_mybeacon) { + sc->hw_busy_count = 0; + ath_start_rx_poll(sc, 3); + } if (ath9k_process_rate(common, hw, rx_stats, rx_status)) return -EINVAL; @@ -1278,10 +1282,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) if (retval) goto requeue_drop_frag; - if (rs.is_mybeacon) { - sc->hw_busy_count = 0; - ath_start_rx_poll(sc, 3); - } /* Ensure we always have an skb to requeue once we are done * processing the current buffer's skb */ requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC); -- cgit v0.10.2 From b09255957b69d7b5ea1ad9d2b455a4f8769e06e7 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:20 +0530 Subject: ath9k: Handle corrupt descriptors properly The MIC/PHYERR/CRC error bits are valid only for the last desc. for chained packets. Check this early in the preprocess() routine and bail out. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 5b84ce4..30cb726 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1099,6 +1099,16 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, if (rx_stats->rs_more) return 0; + /* + * Return immediately if the RX descriptor has been marked + * as corrupt based on the various error bits. + * + * This is different from the other corrupt descriptor + * condition handled above. + */ + if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) + return -EINVAL; + hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len); ath9k_process_tsf(rx_stats, rx_status, tsf); @@ -1335,8 +1345,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) sc->rx.frag = skb; goto requeue; } - if (rs.rs_status & ATH9K_RXERR_CORRUPT_DESC) - goto requeue_drop_frag; if (sc->rx.frag) { int space = skb->len - skb_tailroom(hdr_skb); -- cgit v0.10.2 From 7c5c73cde03c876b23d840e82f4df687bce83b44 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:21 +0530 Subject: ath9k: Fix error condition for corrupt descriptors In case a descriptor has the "done" bit clear and the next descriptor has it set, we drop both of them. If the packet that is received after these two packets is dropped for some reason, "discard_next" will not cleared. Fix this. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 30cb726..ec89280 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1068,6 +1068,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_hdr *hdr; bool discard_current = sc->rx.discard_next; + int ret = 0; /* * Discard corrupt descriptors which are marked in @@ -1106,8 +1107,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, * This is different from the other corrupt descriptor * condition handled above. */ - if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) - return -EINVAL; + if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) { + ret = -EINVAL; + goto exit; + } hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len); @@ -1123,15 +1126,18 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime)) RX_STAT_INC(rx_spectral); - return -EINVAL; + ret = -EINVAL; + goto exit; } /* * everything but the rate is checked here, the rate check is done * separately to avoid doing two lookups for a rate for each frame. */ - if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) - return -EINVAL; + if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) { + ret = -EINVAL; + goto exit; + } rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr); if (rx_stats->is_mybeacon) { @@ -1139,8 +1145,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, ath_start_rx_poll(sc, 3); } - if (ath9k_process_rate(common, hw, rx_stats, rx_status)) - return -EINVAL; + if (ath9k_process_rate(common, hw, rx_stats, rx_status)) { + ret =-EINVAL; + goto exit; + } ath9k_process_rssi(common, hw, hdr, rx_stats); @@ -1152,15 +1160,15 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, if (rx_stats->rs_moreaggr) rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL; - sc->rx.discard_next = false; - #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT if (ieee80211_is_data_present(hdr->frame_control) && !ieee80211_is_qos_nullfunc(hdr->frame_control)) sc->rx.num_pkts++; #endif - return 0; +exit: + sc->rx.discard_next = false; + return ret; } static void ath9k_rx_skb_postprocess(struct ath_common *common, -- cgit v0.10.2 From ea3ef101d750f78dc1e532bcf759ab9afea295df Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 09:11:22 +0530 Subject: ath9k: Remove unused function argument Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index ec89280..3b47198 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -885,7 +885,6 @@ static int ath9k_process_rate(struct ath_common *common, static void ath9k_process_rssi(struct ath_common *common, struct ieee80211_hw *hw, - struct ieee80211_hdr *hdr, struct ath_rx_status *rx_stats) { struct ath_softc *sc = hw->priv; @@ -1150,7 +1149,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, goto exit; } - ath9k_process_rssi(common, hw, hdr, rx_stats); + ath9k_process_rssi(common, hw, rx_stats); rx_status->band = hw->conf.chandef.chan->band; rx_status->freq = hw->conf.chandef.chan->center_freq; -- cgit v0.10.2 From e3acd13d2141fa25566877e8f575065f204317f5 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 21:15:54 +0530 Subject: ath9k: Handle invalid RSSI The combined RSSI can be invalid which is indicated by the value -128. Use RX_FLAG_NO_SIGNAL_VAL for such cases. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 3b47198..6ad7d61 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -885,29 +885,49 @@ static int ath9k_process_rate(struct ath_common *common, static void ath9k_process_rssi(struct ath_common *common, struct ieee80211_hw *hw, - struct ath_rx_status *rx_stats) + struct ath_rx_status *rx_stats, + struct ieee80211_rx_status *rxs) { struct ath_softc *sc = hw->priv; struct ath_hw *ah = common->ah; int last_rssi; int rssi = rx_stats->rs_rssi; - if (!rx_stats->is_mybeacon || - ((ah->opmode != NL80211_IFTYPE_STATION) && - (ah->opmode != NL80211_IFTYPE_ADHOC))) + /* + * RSSI is not available for subframes in an A-MPDU. + */ + if (rx_stats->rs_moreaggr) { + rxs->flag |= RX_FLAG_NO_SIGNAL_VAL; + return; + } + + /* + * Check if the RSSI for the last subframe in an A-MPDU + * or an unaggregated frame is valid. + */ + if (rx_stats->rs_rssi == ATH9K_RSSI_BAD) { + rxs->flag |= RX_FLAG_NO_SIGNAL_VAL; return; + } - if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && !rx_stats->rs_moreaggr) + /* + * Update Beacon RSSI, this is used by ANI. + */ + if (rx_stats->is_mybeacon && + ((ah->opmode == NL80211_IFTYPE_STATION) || + (ah->opmode == NL80211_IFTYPE_ADHOC))) { ATH_RSSI_LPF(sc->last_rssi, rx_stats->rs_rssi); + last_rssi = sc->last_rssi; + + if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER)) + rssi = ATH_EP_RND(last_rssi, ATH_RSSI_EP_MULTIPLIER); + if (rssi < 0) + rssi = 0; - last_rssi = sc->last_rssi; - if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER)) - rssi = ATH_EP_RND(last_rssi, ATH_RSSI_EP_MULTIPLIER); - if (rssi < 0) - rssi = 0; + ah->stats.avgbrssi = rssi; + } - /* Update Beacon RSSI, this is used by ANI. */ - ah->stats.avgbrssi = rssi; + rxs->signal = ah->noise + rx_stats->rs_rssi; } static void ath9k_process_tsf(struct ath_rx_status *rs, @@ -1149,15 +1169,12 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc, goto exit; } - ath9k_process_rssi(common, hw, rx_stats); + ath9k_process_rssi(common, hw, rx_stats, rx_status); rx_status->band = hw->conf.chandef.chan->band; rx_status->freq = hw->conf.chandef.chan->center_freq; - rx_status->signal = ah->noise + rx_stats->rs_rssi; rx_status->antenna = rx_stats->rs_antenna; rx_status->flag |= RX_FLAG_MACTIME_END; - if (rx_stats->rs_moreaggr) - rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL; #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT if (ieee80211_is_data_present(hdr->frame_control) && -- cgit v0.10.2 From 009af8fb69c9d6274b3a49377be5ba2379e188d6 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 21:15:55 +0530 Subject: ath9k: Identify first subframe in an A-MPDU Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c index 5163abd..f6c5c1b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c @@ -491,6 +491,7 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs, rxs->rs_rate = MS(rxsp->status1, AR_RxRate); rxs->rs_more = (rxsp->status2 & AR_RxMore) ? 1 : 0; + rxs->rs_firstaggr = (rxsp->status11 & AR_RxFirstAggr) ? 1 : 0; rxs->rs_isaggr = (rxsp->status11 & AR_RxAggr) ? 1 : 0; rxs->rs_moreaggr = (rxsp->status11 & AR_RxMoreAggr) ? 1 : 0; rxs->rs_antenna = (MS(rxsp->status4, AR_RxAntenna) & 0x7); diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 2ef05eb..a3eff09 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -583,9 +583,9 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds, rs->rs_rate = MS(ads.ds_rxstatus0, AR_RxRate); rs->rs_more = (ads.ds_rxstatus1 & AR_RxMore) ? 1 : 0; + rs->rs_firstaggr = (ads.ds_rxstatus8 & AR_RxFirstAggr) ? 1 : 0; rs->rs_isaggr = (ads.ds_rxstatus8 & AR_RxAggr) ? 1 : 0; - rs->rs_moreaggr = - (ads.ds_rxstatus8 & AR_RxMoreAggr) ? 1 : 0; + rs->rs_moreaggr = (ads.ds_rxstatus8 & AR_RxMoreAggr) ? 1 : 0; rs->rs_antenna = MS(ads.ds_rxstatus3, AR_RxAntenna); /* directly mapped flags for ieee80211_rx_status */ diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index b02dfce..bfccace 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -140,6 +140,7 @@ struct ath_rx_status { int8_t rs_rssi_ext1; int8_t rs_rssi_ext2; u8 rs_isaggr; + u8 rs_firstaggr; u8 rs_moreaggr; u8 rs_num_delims; u8 rs_flags; @@ -569,6 +570,7 @@ struct ar5416_desc { #define AR_RxAggr 0x00020000 #define AR_PostDelimCRCErr 0x00040000 #define AR_RxStatusRsvd71 0x3ff80000 +#define AR_RxFirstAggr 0x20000000 #define AR_DecryptBusyErr 0x40000000 #define AR_KeyMiss 0x80000000 -- cgit v0.10.2 From c3124df7962f7a58177073d54d451e1661ffb71f Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 21:15:56 +0530 Subject: ath9k: Optimize LNA check The documentation for antenna diversity says: "The decision of diversity is done at 802.11 preamble. So, for 11G/11B, for every MAC packet hardware will do a decision. But in 11N with aggregation, the decision is made only at the preamble and all other MPDUs will use the same LNA as the first MPDU." Make use of rs_firstaggr to avoid needlessly scanning for LNA changes. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6ad7d61..6161d14 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1238,6 +1238,52 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, rxs->flag &= ~RX_FLAG_DECRYPTED; } +/* + * Run the LNA combining algorithm only in these cases: + * + * Standalone WLAN cards with both LNA/Antenna diversity + * enabled in the EEPROM. + * + * WLAN+BT cards which are in the supported card list + * in ath_pci_id_table and the user has loaded the + * driver with "bt_ant_diversity" set to true. + */ +static void ath9k_antenna_check(struct ath_softc *sc, + struct ath_rx_status *rs) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath9k_hw_capabilities *pCap = &ah->caps; + struct ath_common *common = ath9k_hw_common(ah); + + if (!(ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB)) + return; + + /* + * All MPDUs in an aggregate will use the same LNA + * as the first MPDU. + */ + if (rs->rs_isaggr && !rs->rs_firstaggr) + return; + + /* + * Change the default rx antenna if rx diversity + * chooses the other antenna 3 times in a row. + */ + if (sc->rx.defant != rs->rs_antenna) { + if (++sc->rx.rxotherant >= 3) + ath_setdefantenna(sc, rs->rs_antenna); + } else { + sc->rx.rxotherant = 0; + } + + if (pCap->hw_caps & ATH9K_HW_CAP_BT_ANT_DIV) { + if (common->bt_ant_diversity) + ath_ant_comb_scan(sc, rs); + } else { + ath_ant_comb_scan(sc, rs); + } +} + static void ath9k_apply_ampdu_details(struct ath_softc *sc, struct ath_rx_status *rs, struct ieee80211_rx_status *rxs) { @@ -1262,7 +1308,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) struct sk_buff *skb = NULL, *requeue_skb, *hdr_skb; struct ieee80211_rx_status *rxs; struct ath_hw *ah = sc->sc_ah; - struct ath9k_hw_capabilities *pCap = &ah->caps; struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_hw *hw = sc->hw; int retval; @@ -1398,35 +1443,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) ath_rx_ps(sc, skb, rs.is_mybeacon); spin_unlock_irqrestore(&sc->sc_pm_lock, flags); - /* - * Run the LNA combining algorithm only in these cases: - * - * Standalone WLAN cards with both LNA/Antenna diversity - * enabled in the EEPROM. - * - * WLAN+BT cards which are in the supported card list - * in ath_pci_id_table and the user has loaded the - * driver with "bt_ant_diversity" set to true. - */ - if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) { - /* - * Change the default rx antenna if rx diversity - * chooses the other antenna 3 times in a row. - */ - if (sc->rx.defant != rs.rs_antenna) { - if (++sc->rx.rxotherant >= 3) - ath_setdefantenna(sc, rs.rs_antenna); - } else { - sc->rx.rxotherant = 0; - } - - if (pCap->hw_caps & ATH9K_HW_CAP_BT_ANT_DIV) { - if (common->bt_ant_diversity) - ath_ant_comb_scan(sc, &rs); - } else { - ath_ant_comb_scan(sc, &rs); - } - } + ath9k_antenna_check(sc, &rs); ath9k_apply_ampdu_details(sc, &rs, rxs); -- cgit v0.10.2 From 5d07cca2128c214ea6029a6b65082e642ee7355e Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 14 Aug 2013 21:15:57 +0530 Subject: ath9k: Use lockless variant to initialize RX fifo Since the rx_fifo queue is accessed only using the various lockless SKB queue routines, there is no need to initialize the lock and __skb_queue_head_init() can be used. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6161d14..653f7fc 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -190,7 +190,7 @@ static void ath_rx_edma_cleanup(struct ath_softc *sc) static void ath_rx_edma_init_queue(struct ath_rx_edma *rx_edma, int size) { - skb_queue_head_init(&rx_edma->rx_fifo); + __skb_queue_head_init(&rx_edma->rx_fifo); rx_edma->rx_fifo_hwsize = size; } -- cgit v0.10.2 From e5b417e73efa52b9179ce2a2b7676f08425c62e3 Mon Sep 17 00:00:00 2001 From: Mark Schulte Date: Wed, 31 Jul 2013 00:08:27 -0700 Subject: rtlwifi: sparse warnings: cast to restricted type Adding type casts to suppress sparse warnings: * warning: cast to restricted __le32/__le16 Signed-off-by: Mark Schulte Acked-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c index 298b615..f646b75 100644 --- a/drivers/net/wireless/rtlwifi/ps.c +++ b/drivers/net/wireless/rtlwifi/ps.c @@ -688,7 +688,7 @@ static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data, find_p2p_ie = true; /*to find noa ie*/ while (ie + 1 < end) { - noa_len = READEF2BYTE(&ie[1]); + noa_len = READEF2BYTE((__le16 *)&ie[1]); if (ie + 3 + ie[1] > end) return; @@ -717,13 +717,13 @@ static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data, READEF1BYTE(ie+index); index += 1; p2pinfo->noa_duration[i] = - READEF4BYTE(ie+index); + READEF4BYTE((__le32 *)ie+index); index += 4; p2pinfo->noa_interval[i] = - READEF4BYTE(ie+index); + READEF4BYTE((__le32 *)ie+index); index += 4; p2pinfo->noa_start_time[i] = - READEF4BYTE(ie+index); + READEF4BYTE((__le32 *)ie+index); index += 4; } @@ -780,7 +780,7 @@ static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data, RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "action frame find P2P IE.\n"); /*to find noa ie*/ while (ie + 1 < end) { - noa_len = READEF2BYTE(&ie[1]); + noa_len = READEF2BYTE((__le16 *)&ie[1]); if (ie + 3 + ie[1] > end) return; @@ -809,13 +809,13 @@ static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data, READEF1BYTE(ie+index); index += 1; p2pinfo->noa_duration[i] = - READEF4BYTE(ie+index); + READEF4BYTE((__le32 *)ie+index); index += 4; p2pinfo->noa_interval[i] = - READEF4BYTE(ie+index); + READEF4BYTE((__le32 *)ie+index); index += 4; p2pinfo->noa_start_time[i] = - READEF4BYTE(ie+index); + READEF4BYTE((__le32 *)ie+index); index += 4; } -- cgit v0.10.2 From 67d0cf50bd32b66eab709871714e55725ee30ce4 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 9 Aug 2013 13:36:21 -0400 Subject: brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error() The driver fails to check the results of DMA mapping in twp places, which results in the following warning: [ 28.078515] ------------[ cut here ]------------ [ 28.078529] WARNING: at lib/dma-debug.c:937 check_unmap+0x47e/0x930() [ 28.078533] bcma-pci-bridge 0000:0e:00.0: DMA-API: device driver failed to check map error[device address=0x00000000b5d60d6c] [size=1876 bytes] [mapped as single] [ 28.078536] Modules linked in: bnep bluetooth vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) ipv6 b43 brcmsmac rtl8192cu rtl8192c_common rtlwifi mac802 11 brcmutil cfg80211 snd_hda_codec_conexant rng_core snd_hda_intel kvm_amd snd_hda_codec ssb kvm mmc_core snd_pcm snd_seq snd_timer snd_seq_device snd k8temp cordic joydev serio_raw hwmon sr_mod sg pcmcia pcmcia_core soundcore cdrom i2c_nforce2 i2c_core forcedeth bcma snd_page_alloc autofs4 ext4 jbd2 mbcache crc1 6 scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic pata_amd [ 28.078602] CPU: 1 PID: 2570 Comm: NetworkManager Tainted: G O 3.10.0-rc7-wl+ #42 [ 28.078605] Hardware name: Hewlett-Packard HP Pavilion dv2700 Notebook PC/30D6, BIOS F.27 11/27/2008 [ 28.078607] 0000000000000009 ffff8800bbb03ad8 ffffffff8144f898 ffff8800bbb03b18 [ 28.078612] ffffffff8103e1eb 0000000000000002 ffff8800b719f480 ffff8800b7b9c010 [ 28.078617] ffffffff824204c0 ffffffff81754d57 0000000000000754 ffff8800bbb03b78 [ 28.078622] Call Trace: [ 28.078624] [] dump_stack+0x19/0x1b [ 28.078634] [] warn_slowpath_common+0x6b/0xa0 [ 28.078638] [] warn_slowpath_fmt+0x41/0x50 [ 28.078650] [] check_unmap+0x47e/0x930 [ 28.078655] [] debug_dma_unmap_page+0x5c/0x70 [ 28.078679] [] dma64_getnextrxp+0x10c/0x190 [brcmsmac] [ 28.078691] [] dma_rx+0x62/0x240 [brcmsmac] [ 28.078707] [] brcms_c_dpc+0x211/0x9d0 [brcmsmac] [ 28.078717] [] ? brcms_dpc+0x27/0xf0 [brcmsmac] [ 28.078731] [] brcms_dpc+0x47/0xf0 [brcmsmac] [ 28.078736] [] tasklet_action+0x6c/0xf0 --snip-- [ 28.078974] [] SyS_sendmsg+0xd/0x20 [ 28.078979] [] tracesys+0xdd/0xe2 [ 28.078982] ---[ end trace 6164d1a08148e9c8 ]--- [ 28.078984] Mapped at: [ 28.078985] [] debug_dma_map_page+0x9d/0x150 [ 28.078989] [] dma_rxfill+0x102/0x3d0 [brcmsmac] [ 28.079001] [] brcms_c_init+0x87d/0x1100 [brcmsmac] [ 28.079010] [] brcms_init+0x21/0x30 [brcmsmac] [ 28.079018] [] brcms_c_up+0x150/0x430 [brcmsmac] As the patch adds a new failure mechanism to dma_rxfill(). When I changed the comment at the start of the routine to add that information, I also polished the wording. Signed-off-by: Larry Finger Cc: Stable Cc: Brett Rudley Cc: Franky (Zhenhui) Lin Cc: Hante Meuleman Cc: brcm80211-dev-list@broadcom.com Acked-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/dma.c b/drivers/net/wireless/brcm80211/brcmsmac/dma.c index 1860c57..4fb9635 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c @@ -1015,9 +1015,10 @@ static bool dma64_txidle(struct dma_info *di) /* * post receive buffers - * return false is refill failed completely and ring is empty this will stall - * the rx dma and user might want to call rxfill again asap. This unlikely - * happens on memory-rich NIC, but often on memory-constrained dongle + * Return false if refill failed completely or dma mapping failed. The ring + * is empty, which will stall the rx dma and user might want to call rxfill + * again asap. This is unlikely to happen on a memory-rich NIC, but often on + * memory-constrained dongle. */ bool dma_rxfill(struct dma_pub *pub) { @@ -1078,6 +1079,8 @@ bool dma_rxfill(struct dma_pub *pub) pa = dma_map_single(di->dmadev, p->data, di->rxbufsize, DMA_FROM_DEVICE); + if (dma_mapping_error(di->dmadev, pa)) + return false; /* save the free packet pointer */ di->rxp[rxout] = p; @@ -1284,7 +1287,11 @@ static void dma_txenq(struct dma_info *di, struct sk_buff *p) /* get physical address of buffer start */ pa = dma_map_single(di->dmadev, data, len, DMA_TO_DEVICE); - + /* if mapping failed, free skb */ + if (dma_mapping_error(di->dmadev, pa)) { + brcmu_pkt_buf_free_skb(p); + return; + } /* With a DMA segment list, Descriptor table is filled * using the segment list instead of looping over * buffers in multi-chain DMA. Therefore, EOF for SGLIST -- cgit v0.10.2 From 3571ac3370ef4e81ed5d60d810682c7b7bd95264 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Mon, 29 Jul 2013 17:08:48 +0300 Subject: iwlwifi: mvm: remove unused param of rs_dbgfs_set_mcs clean it up Signed-off-by: Eyal Shapira Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 5cb3132..9ae1bad 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -161,10 +161,10 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); #ifdef CONFIG_MAC80211_DEBUGFS static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index); + u32 *rate_n_flags); #else static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index) + u32 *rate_n_flags) {} #endif @@ -2370,7 +2370,7 @@ static void rs_fill_link_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; /* Override starting rate (index 0) if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + rs_dbgfs_set_mcs(lq_sta, &new_rate); /* Interpret new_rate (rate_n_flags) */ rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, @@ -2417,7 +2417,7 @@ static void rs_fill_link_cmd(struct iwl_mvm *mvm, } /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + rs_dbgfs_set_mcs(lq_sta, &new_rate); /* Fill next table entry */ lq_cmd->rs_table[index] = @@ -2459,7 +2459,7 @@ static void rs_fill_link_cmd(struct iwl_mvm *mvm, use_ht_possible = 0; /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); + rs_dbgfs_set_mcs(lq_sta, &new_rate); /* Fill next table entry */ lq_cmd->rs_table[index] = cpu_to_le32(new_rate); @@ -2504,7 +2504,7 @@ static void rs_free_sta(void *mvm_r, struct ieee80211_sta *sta, #ifdef CONFIG_MAC80211_DEBUGFS static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index) + u32 *rate_n_flags) { struct iwl_mvm *mvm; u8 valid_tx_ant; -- cgit v0.10.2 From 7abc4632bf1259a491188266a9aaa82ddeb55ff3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 6 Aug 2013 18:28:26 +0200 Subject: iwlwifi: mvm: refactor resume from WoWLAN code To be able to add more logic to the resume code, refactor it a bit, moving some status checking/reporting logic into a new function. The locking becomes a bit odd (one of the new functions now unlocks the mutex) but this will be required to call new mac80211 APIs in there later. Reviewed-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index ebf7f94..ec07f0a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1104,73 +1104,16 @@ int iwl_mvm_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) return __iwl_mvm_suspend(hw, wowlan, false); } -static void iwl_mvm_query_wakeup_reasons(struct iwl_mvm *mvm, - struct ieee80211_vif *vif) +static void iwl_mvm_report_wakeup_reasons(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct iwl_wowlan_status *status) { - u32 base = mvm->error_event_table; - struct error_table_start { - /* cf. struct iwl_error_event_table */ - u32 valid; - u32 error_id; - } err_info; + struct sk_buff *pkt = NULL; struct cfg80211_wowlan_wakeup wakeup = { .pattern_idx = -1, }; struct cfg80211_wowlan_wakeup *wakeup_report = &wakeup; - struct iwl_host_cmd cmd = { - .id = WOWLAN_GET_STATUSES, - .flags = CMD_SYNC | CMD_WANT_SKB, - }; - struct iwl_wowlan_status *status; - u32 reasons; - int ret, len; - struct sk_buff *pkt = NULL; - - iwl_trans_read_mem_bytes(mvm->trans, base, - &err_info, sizeof(err_info)); - - if (err_info.valid) { - IWL_INFO(mvm, "error table is valid (%d)\n", - err_info.valid); - if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) { - wakeup.rfkill_release = true; - ieee80211_report_wowlan_wakeup(vif, &wakeup, - GFP_KERNEL); - } - return; - } - - /* only for tracing for now */ - ret = iwl_mvm_send_cmd_pdu(mvm, OFFLOADS_QUERY_CMD, CMD_SYNC, 0, NULL); - if (ret) - IWL_ERR(mvm, "failed to query offload statistics (%d)\n", ret); - - ret = iwl_mvm_send_cmd(mvm, &cmd); - if (ret) { - IWL_ERR(mvm, "failed to query status (%d)\n", ret); - return; - } - - /* RF-kill already asserted again... */ - if (!cmd.resp_pkt) - return; - - len = le32_to_cpu(cmd.resp_pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - if (len - sizeof(struct iwl_cmd_header) < sizeof(*status)) { - IWL_ERR(mvm, "Invalid WoWLAN status response!\n"); - goto out; - } - - status = (void *)cmd.resp_pkt->data; - - if (len - sizeof(struct iwl_cmd_header) != - sizeof(*status) + - ALIGN(le32_to_cpu(status->wake_packet_bufsize), 4)) { - IWL_ERR(mvm, "Invalid WoWLAN status response!\n"); - goto out; - } - - reasons = le32_to_cpu(status->wakeup_reasons); + u32 reasons = le32_to_cpu(status->wakeup_reasons); if (reasons == IWL_WOWLAN_WAKEUP_BY_NON_WIRELESS) { wakeup_report = NULL; @@ -1233,6 +1176,12 @@ static void iwl_mvm_query_wakeup_reasons(struct iwl_mvm *mvm, pktsize -= hdrlen; if (ieee80211_has_protected(hdr->frame_control)) { + /* + * This is unlocked and using gtk_i(c)vlen, + * but since everything is under RTNL still + * that's not really a problem - changing + * it would be difficult. + */ if (is_multicast_ether_addr(hdr->addr1)) { ivlen = mvm->gtk_ivlen; icvlen += mvm->gtk_icvlen; @@ -1283,9 +1232,82 @@ static void iwl_mvm_query_wakeup_reasons(struct iwl_mvm *mvm, report: ieee80211_report_wowlan_wakeup(vif, wakeup_report, GFP_KERNEL); kfree_skb(pkt); +} - out: +/* releases the MVM mutex */ +static void iwl_mvm_query_wakeup_reasons(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + u32 base = mvm->error_event_table; + struct error_table_start { + /* cf. struct iwl_error_event_table */ + u32 valid; + u32 error_id; + } err_info; + struct iwl_host_cmd cmd = { + .id = WOWLAN_GET_STATUSES, + .flags = CMD_SYNC | CMD_WANT_SKB, + }; + struct iwl_wowlan_status *status; + int ret, len; + + iwl_trans_read_mem_bytes(mvm->trans, base, + &err_info, sizeof(err_info)); + + if (err_info.valid) { + IWL_INFO(mvm, "error table is valid (%d)\n", + err_info.valid); + if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) { + struct cfg80211_wowlan_wakeup wakeup = { + .rfkill_release = true, + }; + ieee80211_report_wowlan_wakeup(vif, &wakeup, + GFP_KERNEL); + } + goto out_unlock; + } + + /* only for tracing for now */ + ret = iwl_mvm_send_cmd_pdu(mvm, OFFLOADS_QUERY_CMD, CMD_SYNC, 0, NULL); + if (ret) + IWL_ERR(mvm, "failed to query offload statistics (%d)\n", ret); + + ret = iwl_mvm_send_cmd(mvm, &cmd); + if (ret) { + IWL_ERR(mvm, "failed to query status (%d)\n", ret); + goto out_unlock; + } + + /* RF-kill already asserted again... */ + if (!cmd.resp_pkt) + goto out_unlock; + + len = le32_to_cpu(cmd.resp_pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + if (len - sizeof(struct iwl_cmd_header) < sizeof(*status)) { + IWL_ERR(mvm, "Invalid WoWLAN status response!\n"); + goto out_free_resp; + } + + status = (void *)cmd.resp_pkt->data; + + if (len - sizeof(struct iwl_cmd_header) != + sizeof(*status) + + ALIGN(le32_to_cpu(status->wake_packet_bufsize), 4)) { + IWL_ERR(mvm, "Invalid WoWLAN status response!\n"); + goto out_free_resp; + } + + /* now we have all the data we need, unlock to avoid mac80211 issues */ + mutex_unlock(&mvm->mutex); + + iwl_mvm_report_wakeup_reasons(mvm, vif, status); + iwl_free_resp(&cmd); + return; + + out_free_resp: iwl_free_resp(&cmd); + out_unlock: + mutex_unlock(&mvm->mutex); } static void iwl_mvm_read_d3_sram(struct iwl_mvm *mvm) @@ -1342,10 +1364,13 @@ static int __iwl_mvm_resume(struct iwl_mvm *mvm, bool test) iwl_mvm_read_d3_sram(mvm); iwl_mvm_query_wakeup_reasons(mvm, vif); + /* has unlocked the mutex, so skip that */ + goto out; out_unlock: mutex_unlock(&mvm->mutex); + out: if (!test && vif) ieee80211_resume_disconnect(vif); -- cgit v0.10.2 From 66140adc22aacd95037ac9f89eeff61676d36cce Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 12 Aug 2013 19:30:21 +0300 Subject: iwlwifi: use a macro for default probe length Instead of assigning the default max probe length to 200 in the main code, create a macro for consistency and clarity. Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index d0162d4..e88397b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -843,7 +843,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) int i; bool load_module = false; - fw->ucode_capa.max_probe_length = 200; + fw->ucode_capa.max_probe_length = IWL_DEFAULT_MAX_PROBE_LENGTH; fw->ucode_capa.standard_phy_calibration_size = IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index 1705d24..a122368 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -99,6 +99,9 @@ enum iwl_ucode_tlv_flag { #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 +/* The default max probe length if not specified by the firmware file */ +#define IWL_DEFAULT_MAX_PROBE_LENGTH 200 + /** * enum iwl_ucode_type * -- cgit v0.10.2 From 3b1995ad83709ac2e1e86c99b37d5ba9ce410f56 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 12 Aug 2013 21:58:36 +0300 Subject: iwlwifi: Kconfig: fix help texts wrt 7260 and 3160 devices Fix the help texts to properly reflect the 7260 and 3160 devices support. Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index e5c133e..3eb2102 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -22,6 +22,8 @@ config IWLWIFI Intel Wireless WiFi Link 6150BGN 2 Adapter Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) Intel 2000 Series Wi-Fi Adapters + Intel 7260 Wi-Fi Adapter + Intel 3160 Wi-Fi Adapter This driver uses the kernel's mac80211 subsystem. @@ -46,17 +48,16 @@ config IWLDVM depends on IWLWIFI default IWLWIFI help - This is the driver supporting the DVM firmware which is - currently the only firmware available for existing devices. + This is the driver that supports the DVM firmware which is + used by most existing devices (with the exception of 7260 + and 3160). config IWLMVM tristate "Intel Wireless WiFi MVM Firmware support" depends on IWLWIFI help - This is the driver supporting the MVM firmware which is - currently only available for 7000 series devices. - - Say yes if you have such a device. + This is the driver that supports the MVM firmware which is + currently only available for 7260 and 3160 devices. # don't call it _MODULE -- will confuse Kconfig/fixdep/... config IWLWIFI_OPMODE_MODULAR -- cgit v0.10.2 From eafe25e0afaf45a4e38f9b3560ac774a2395c695 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 13 Aug 2013 10:34:55 +0300 Subject: iwlwifi: return -ENOMEM instead of NULL when OOM in iwl_drv_start() The callers of iwl_drv_start() are probe functions. If a probe function returns 0, it means it succeeded. So if NULL was returned by iwl_drv_start(), it would be considered as a success. Fix this by returning -ENOMEM if the driver struct allocation fails in iwl_drv_start(). Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index e88397b..99e1da3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1032,8 +1032,10 @@ struct iwl_drv *iwl_drv_start(struct iwl_trans *trans, int ret; drv = kzalloc(sizeof(*drv), GFP_KERNEL); - if (!drv) - return NULL; + if (!drv) { + ret = -ENOMEM; + goto err; + } drv->trans = trans; drv->dev = trans->dev; @@ -1078,7 +1080,7 @@ err_free_dbgfs: err_free_drv: #endif kfree(drv); - +err: return ERR_PTR(ret); } diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index e179efe..567ef01 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -332,7 +332,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) trans_pcie = IWL_TRANS_GET_PCIE_TRANS(iwl_trans); trans_pcie->drv = iwl_drv_start(iwl_trans, cfg); - if (IS_ERR_OR_NULL(trans_pcie->drv)) { + if (IS_ERR(trans_pcie->drv)) { ret = PTR_ERR(trans_pcie->drv); goto out_free_trans; } -- cgit v0.10.2 From a20fd398666dbf5cdee3fe97722350cc10619c84 Mon Sep 17 00:00:00 2001 From: Andrei Otcheretianski Date: Sun, 21 Jul 2013 17:23:59 +0300 Subject: iwlwifi: mvm: Implement CQM offloading Use beacon statistics notification to track RSSI. Notify mac80211 when the tresholds are crossed. The roaming treshold is configured to be equal to cqm_thold. If the beacon filtering command is not supported by fw fall back and use mac80211 mechanism. Signed-off-by: Andrei Otcheretianski Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c index 14811a5..c67b17a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c @@ -920,7 +920,7 @@ static ssize_t iwl_dbgfs_bf_params_read(struct file *file, }; iwl_mvm_beacon_filter_debugfs_parameters(vif, &cmd); - if (mvmvif->bf_enabled) + if (mvmvif->bf_data.bf_enabled) cmd.bf_enable_beacon_filter = cpu_to_le32(1); else cmd.bf_enable_beacon_filter = 0; diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index b104710..66264cc 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -1321,7 +1321,7 @@ struct mvm_statistics_general { struct mvm_statistics_general_common common; __le32 beacon_filtered; __le32 missed_beacons; - __s8 beacon_filter_everage_energy; + __s8 beacon_filter_average_energy; __s8 beacon_filter_reason; __s8 beacon_filter_current_energy; __s8 beacon_filter_reserved; diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 66803b9..692d2ea 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -575,7 +575,8 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, vif->type == NL80211_IFTYPE_STATION && !vif->p2p && mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_BF_UPDATED){ mvm->bf_allowed_vif = mvmvif; - vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER; + vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | + IEEE80211_VIF_SUPPORTS_CQM_RSSI; } /* @@ -615,7 +616,8 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, out_free_bf: if (mvm->bf_allowed_vif == mvmvif) { mvm->bf_allowed_vif = NULL; - vif->driver_flags &= ~IEEE80211_VIF_BEACON_FILTER; + vif->driver_flags &= ~(IEEE80211_VIF_BEACON_FILTER | + IEEE80211_VIF_SUPPORTS_CQM_RSSI); } out_remove_mac: mvmvif->phy_ctxt = NULL; @@ -681,7 +683,8 @@ static void iwl_mvm_mac_remove_interface(struct ieee80211_hw *hw, if (mvm->bf_allowed_vif == mvmvif) { mvm->bf_allowed_vif = NULL; - vif->driver_flags &= ~IEEE80211_VIF_BEACON_FILTER; + vif->driver_flags &= ~(IEEE80211_VIF_BEACON_FILTER | + IEEE80211_VIF_SUPPORTS_CQM_RSSI); } iwl_mvm_vif_dbgfs_clean(mvm, vif); @@ -799,6 +802,10 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, if (ret) IWL_ERR(mvm, "failed to update quotas\n"); } + + /* reset rssi values */ + mvmvif->bf_data.ave_beacon_signal = 0; + if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD)) { /* Workaround for FW bug, otherwise FW disables device * power save upon disassociation @@ -825,6 +832,15 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, bss_conf->txpower); iwl_mvm_set_tx_power(mvm, vif, bss_conf->txpower); } + + if (changes & BSS_CHANGED_CQM) { + IWL_DEBUG_MAC80211(mvm, "cqm info_changed"); + /* reset cqm events tracking */ + mvmvif->bf_data.last_cqm_event = 0; + ret = iwl_mvm_update_beacon_filter(mvm, vif); + if (ret) + IWL_ERR(mvm, "failed to update CQM thresholds\n"); + } } static int iwl_mvm_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif) diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index 014d779..ee46dea 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -233,6 +233,21 @@ enum iwl_mvm_smps_type_request { }; /** +* struct iwl_mvm_vif_bf_data - beacon filtering related data +* @bf_enabled: indicates if beacon filtering is enabled +* @ba_enabled: indicated if beacon abort is enabled +* @last_beacon_signal: last beacon rssi signal in dbm +* @ave_beacon_signal: average beacon signal +* @last_cqm_event: rssi of the last cqm event +*/ +struct iwl_mvm_vif_bf_data { + bool bf_enabled; + bool ba_enabled; + s8 ave_beacon_signal; + s8 last_cqm_event; +}; + +/** * struct iwl_mvm_vif - data per Virtual Interface, it is a MAC context * @id: between 0 and 3 * @color: to solve races upon MAC addition and removal @@ -257,8 +272,7 @@ struct iwl_mvm_vif { bool uploaded; bool ap_active; bool monitor_active; - /* indicate whether beacon filtering is enabled */ - bool bf_enabled; + struct iwl_mvm_vif_bf_data bf_data; u32 ap_beacon_time; @@ -758,6 +772,8 @@ int iwl_mvm_beacon_filter_send_cmd(struct iwl_mvm *mvm, struct iwl_beacon_filter_cmd *cmd); int iwl_mvm_update_beacon_abort(struct iwl_mvm *mvm, struct ieee80211_vif *vif, bool enable); +int iwl_mvm_update_beacon_filter(struct iwl_mvm *mvm, + struct ieee80211_vif *vif); /* SMPS */ void iwl_mvm_update_smps(struct iwl_mvm *mvm, struct ieee80211_vif *vif, diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index 9c9b5ba..a5529b85 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -110,6 +110,23 @@ int iwl_mvm_beacon_filter_send_cmd(struct iwl_mvm *mvm, return ret; } +static +void iwl_mvm_beacon_filter_set_cqm_params(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct iwl_beacon_filter_cmd *cmd) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (vif->bss_conf.cqm_rssi_thold) { + cmd->bf_energy_delta = + cpu_to_le32(vif->bss_conf.cqm_rssi_hyst); + /* fw uses an absolute value for this */ + cmd->bf_roaming_state = + cpu_to_le32(-vif->bss_conf.cqm_rssi_thold); + } + cmd->ba_enable_beacon_abort = cpu_to_le32(mvmvif->bf_data.ba_enabled); +} + int iwl_mvm_update_beacon_abort(struct iwl_mvm *mvm, struct ieee80211_vif *vif, bool enable) { @@ -120,12 +137,14 @@ int iwl_mvm_update_beacon_abort(struct iwl_mvm *mvm, .ba_enable_beacon_abort = cpu_to_le32(enable), }; - if (!mvmvif->bf_enabled) + if (!mvmvif->bf_data.bf_enabled) return 0; if (mvm->cur_ucode == IWL_UCODE_WOWLAN) cmd.ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER_D3); + mvmvif->bf_data.ba_enabled = enable; + iwl_mvm_beacon_filter_set_cqm_params(mvm, vif, &cmd); iwl_mvm_beacon_filter_debugfs_parameters(vif, &cmd); return iwl_mvm_beacon_filter_send_cmd(mvm, &cmd); } @@ -510,11 +529,12 @@ int iwl_mvm_enable_beacon_filter(struct iwl_mvm *mvm, vif->type != NL80211_IFTYPE_STATION || vif->p2p) return 0; + iwl_mvm_beacon_filter_set_cqm_params(mvm, vif, &cmd); iwl_mvm_beacon_filter_debugfs_parameters(vif, &cmd); ret = iwl_mvm_beacon_filter_send_cmd(mvm, &cmd); if (!ret) - mvmvif->bf_enabled = true; + mvmvif->bf_data.bf_enabled = true; return ret; } @@ -533,11 +553,22 @@ int iwl_mvm_disable_beacon_filter(struct iwl_mvm *mvm, ret = iwl_mvm_beacon_filter_send_cmd(mvm, &cmd); if (!ret) - mvmvif->bf_enabled = false; + mvmvif->bf_data.bf_enabled = false; return ret; } +int iwl_mvm_update_beacon_filter(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (!mvmvif->bf_data.bf_enabled) + return 0; + + return iwl_mvm_enable_beacon_filter(mvm, vif); +} + const struct iwl_mvm_power_ops pm_mac_ops = { .power_update_mode = iwl_mvm_power_mac_update_mode, .power_disable = iwl_mvm_power_mac_disable, diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index ee6547d..2a8cb5a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -396,11 +396,62 @@ static void iwl_mvm_update_rx_statistics(struct iwl_mvm *mvm, memcpy(&mvm->rx_stats, &stats->rx, sizeof(struct mvm_statistics_rx)); } +struct iwl_mvm_stat_data { + struct iwl_notif_statistics *stats; + struct iwl_mvm *mvm; +}; + +static void iwl_mvm_stat_iterator(void *_data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct iwl_mvm_stat_data *data = _data; + struct iwl_notif_statistics *stats = data->stats; + struct iwl_mvm *mvm = data->mvm; + int sig = -stats->general.beacon_filter_average_energy; + int last_event; + int thold = vif->bss_conf.cqm_rssi_thold; + int hyst = vif->bss_conf.cqm_rssi_hyst; + u16 id = le32_to_cpu(stats->rx.general.mac_id); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + + if (mvmvif->id != id) + return; + + if (vif->type != NL80211_IFTYPE_STATION) + return; + + mvmvif->bf_data.ave_beacon_signal = sig; + + if (!(vif->driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) + return; + + /* CQM Notification */ + last_event = mvmvif->bf_data.last_cqm_event; + if (thold && sig < thold && (last_event == 0 || + sig < last_event - hyst)) { + mvmvif->bf_data.last_cqm_event = sig; + IWL_DEBUG_RX(mvm, "cqm_iterator cqm low %d\n", + sig); + ieee80211_cqm_rssi_notify( + vif, + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + GFP_KERNEL); + } else if (sig > thold && + (last_event == 0 || sig > last_event + hyst)) { + mvmvif->bf_data.last_cqm_event = sig; + IWL_DEBUG_RX(mvm, "cqm_iterator cqm high %d\n", + sig); + ieee80211_cqm_rssi_notify( + vif, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + GFP_KERNEL); + } +} + /* * iwl_mvm_rx_statistics - STATISTICS_NOTIFICATION handler * * TODO: This handler is implemented partially. - * It only gets the NIC's temperature. */ int iwl_mvm_rx_statistics(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, @@ -409,6 +460,10 @@ int iwl_mvm_rx_statistics(struct iwl_mvm *mvm, struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_notif_statistics *stats = (void *)&pkt->data; struct mvm_statistics_general_common *common = &stats->general.common; + struct iwl_mvm_stat_data data = { + .stats = stats, + .mvm = mvm, + }; if (mvm->temperature != le32_to_cpu(common->temperature)) { mvm->temperature = le32_to_cpu(common->temperature); @@ -416,5 +471,9 @@ int iwl_mvm_rx_statistics(struct iwl_mvm *mvm, } iwl_mvm_update_rx_statistics(mvm, stats); + ieee80211_iterate_active_interfaces(mvm->hw, + IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_stat_iterator, + &data); return 0; } -- cgit v0.10.2 From 89716344806bd49d213ad5960661e8c2d38c4982 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sun, 4 Aug 2013 17:52:23 +0300 Subject: iwlwifi: mvm: Add PBW snoozing enablement The Performance Based Window snooze mechanism is based on uAPSD and is used in low-medium traffic scenarios, in order to provide better power performance while insuring low latency and jitter for the incoming traffic. This patch enables PBW snoozing in case uAPSD is enabled and all ACs are uAPSD trigger and delivery enabled. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h index 33f98fc..2bf29f7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/constants.h +++ b/drivers/net/wireless/iwlwifi/mvm/constants.h @@ -73,5 +73,8 @@ #define IWL_MVM_PS_HEAVY_RX_THLD_PACKETS 20 #define IWL_MVM_PS_HEAVY_TX_THLD_PERCENT 50 #define IWL_MVM_PS_HEAVY_RX_THLD_PERCENT 50 +#define IWL_MVM_PS_SNOOZE_INTERVAL 25 +#define IWL_MVM_PS_SNOOZE_WINDOW 50 +#define IWL_MVM_WOWLAN_PS_SNOOZE_WINDOW 25 #endif /* __MVM_CONSTANTS_H */ diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c index c67b17a..2e60be2 100644 --- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c @@ -352,6 +352,10 @@ static void iwl_dbgfs_update_pm(struct iwl_mvm *mvm, IWL_DEBUG_POWER(mvm, "lprx_rssi_threshold=%d\n", val); dbgfs_pm->lprx_rssi_threshold = val; break; + case MVM_DEBUGFS_PM_SNOOZE_ENABLE: + IWL_DEBUG_POWER(mvm, "snooze_enable=%d\n", val); + dbgfs_pm->snooze_ena = val; + break; } } @@ -405,6 +409,10 @@ static ssize_t iwl_dbgfs_pm_params_write(struct file *file, POWER_LPRX_RSSI_THRESHOLD_MIN) return -EINVAL; param = MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD; + } else if (!strncmp("snooze_enable=", buf, 14)) { + if (sscanf(buf + 14, "%d", &val) != 1) + return -EINVAL; + param = MVM_DEBUGFS_PM_SNOOZE_ENABLE; } else { return -EINVAL; } diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index bb010b3..8e7ab41 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -155,8 +155,12 @@ struct iwl_powertable_cmd { * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. * Default: 80dbm * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set - * @snooze_interval: TBD - * @snooze_window: TBD + * @snooze_interval: Maximum time between attempts to retrieve buffered data + * from the AP [msec] + * @snooze_window: A window of time in which PBW snoozing insures that all + * packets received. It is also the minimum time from last + * received unicast RX packet, before client stops snoozing + * for data. [msec] * @snooze_step: TBD * @qndp_tid: TID client shall use for uAPSD QNDP triggers * @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index ee46dea..0f33d7f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -180,6 +180,7 @@ enum iwl_dbgfs_pm_mask { MVM_DEBUGFS_PM_DISABLE_POWER_OFF = BIT(5), MVM_DEBUGFS_PM_LPRX_ENA = BIT(6), MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD = BIT(7), + MVM_DEBUGFS_PM_SNOOZE_ENABLE = BIT(8), }; struct iwl_dbgfs_pm { @@ -191,6 +192,7 @@ struct iwl_dbgfs_pm { bool disable_power_off; bool lprx_ena; u32 lprx_rssi_threshold; + bool snooze_ena; int mask; }; diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index a5529b85..21407a3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -301,6 +301,20 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, cpu_to_le32(IWL_MVM_UAPSD_RX_DATA_TIMEOUT); cmd->tx_data_timeout_uapsd = cpu_to_le32(IWL_MVM_UAPSD_TX_DATA_TIMEOUT); + + if (cmd->uapsd_ac_flags == (BIT(IEEE80211_AC_VO) | + BIT(IEEE80211_AC_VI) | + BIT(IEEE80211_AC_BE) | + BIT(IEEE80211_AC_BK))) { + cmd->flags |= cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK); + cmd->snooze_interval = + cpu_to_le16(IWL_MVM_PS_SNOOZE_INTERVAL); + cmd->snooze_window = + (mvm->cur_ucode == IWL_UCODE_WOWLAN) ? + cpu_to_le16(IWL_MVM_WOWLAN_PS_SNOOZE_WINDOW) : + cpu_to_le16(IWL_MVM_PS_SNOOZE_WINDOW); + } + cmd->uapsd_max_sp = IWL_UAPSD_MAX_SP; cmd->heavy_tx_thld_packets = IWL_MVM_PS_HEAVY_TX_THLD_PACKETS; @@ -340,6 +354,14 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, } if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD) cmd->lprx_rssi_threshold = mvmvif->dbgfs_pm.lprx_rssi_threshold; + if (mvmvif->dbgfs_pm.mask & MVM_DEBUGFS_PM_SNOOZE_ENABLE) { + if (mvmvif->dbgfs_pm.snooze_ena) + cmd->flags |= + cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK); + else + cmd->flags &= + cpu_to_le16(~POWER_FLAGS_SNOOZE_ENA_MSK); + } #endif /* CONFIG_IWLWIFI_DEBUGFS */ } @@ -475,6 +497,19 @@ static int iwl_mvm_power_mac_dbgfs_read(struct iwl_mvm *mvm, pos += scnprintf(buf+pos, bufsz-pos, "heavy_rx_thld_percentage = %d\n", cmd.heavy_rx_thld_percentage); + pos += + scnprintf(buf+pos, bufsz-pos, "snooze_enable = %d\n", + (cmd.flags & + cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)) ? + 1 : 0); + } + if (cmd.flags & cpu_to_le16(POWER_FLAGS_SNOOZE_ENA_MSK)) { + pos += scnprintf(buf+pos, bufsz-pos, + "snooze_interval = %d\n", + cmd.snooze_interval); + pos += scnprintf(buf+pos, bufsz-pos, + "snooze_window = %d\n", + cmd.snooze_window); } } return pos; -- cgit v0.10.2 From 86c228a7627f3f2776893da47592234140fbfba8 Mon Sep 17 00:00:00 2001 From: Johan Almbladh Date: Wed, 14 Aug 2013 15:29:46 +0200 Subject: mac80211: perform power save processing before decryption This patch decouples the power save processing from the frame decryption by running the decrypt rx handler after sta_process. In the case where the decryption failed for some reason, the stack used to not process the PM and MOREDATA bits for that frame. The stack now always performs power save processing regardless of the decryption result. That means that encrypted data frames and NULLFUNC frames are now handled in the same way regarding power save processing, making the stack more robust. Signed-off-by: Johan Almbladh Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 0ac7512..ffad155 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1049,207 +1049,6 @@ ieee80211_rx_h_check(struct ieee80211_rx_data *rx) static ieee80211_rx_result debug_noinline -ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) -{ - struct sk_buff *skb = rx->skb; - struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - int keyidx; - int hdrlen; - ieee80211_rx_result result = RX_DROP_UNUSABLE; - struct ieee80211_key *sta_ptk = NULL; - int mmie_keyidx = -1; - __le16 fc; - - /* - * Key selection 101 - * - * There are four types of keys: - * - GTK (group keys) - * - IGTK (group keys for management frames) - * - PTK (pairwise keys) - * - STK (station-to-station pairwise keys) - * - * When selecting a key, we have to distinguish between multicast - * (including broadcast) and unicast frames, the latter can only - * use PTKs and STKs while the former always use GTKs and IGTKs. - * Unless, of course, actual WEP keys ("pre-RSNA") are used, then - * unicast frames can also use key indices like GTKs. Hence, if we - * don't have a PTK/STK we check the key index for a WEP key. - * - * Note that in a regular BSS, multicast frames are sent by the - * AP only, associated stations unicast the frame to the AP first - * which then multicasts it on their behalf. - * - * There is also a slight problem in IBSS mode: GTKs are negotiated - * with each station, that is something we don't currently handle. - * The spec seems to expect that one negotiates the same key with - * every station but there's no such requirement; VLANs could be - * possible. - */ - - /* - * No point in finding a key and decrypting if the frame is neither - * addressed to us nor a multicast frame. - */ - if (!(status->rx_flags & IEEE80211_RX_RA_MATCH)) - return RX_CONTINUE; - - /* start without a key */ - rx->key = NULL; - - if (rx->sta) - sta_ptk = rcu_dereference(rx->sta->ptk); - - fc = hdr->frame_control; - - if (!ieee80211_has_protected(fc)) - mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb); - - if (!is_multicast_ether_addr(hdr->addr1) && sta_ptk) { - rx->key = sta_ptk; - if ((status->flag & RX_FLAG_DECRYPTED) && - (status->flag & RX_FLAG_IV_STRIPPED)) - return RX_CONTINUE; - /* Skip decryption if the frame is not protected. */ - if (!ieee80211_has_protected(fc)) - return RX_CONTINUE; - } else if (mmie_keyidx >= 0) { - /* Broadcast/multicast robust management frame / BIP */ - if ((status->flag & RX_FLAG_DECRYPTED) && - (status->flag & RX_FLAG_IV_STRIPPED)) - return RX_CONTINUE; - - if (mmie_keyidx < NUM_DEFAULT_KEYS || - mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) - return RX_DROP_MONITOR; /* unexpected BIP keyidx */ - if (rx->sta) - rx->key = rcu_dereference(rx->sta->gtk[mmie_keyidx]); - if (!rx->key) - rx->key = rcu_dereference(rx->sdata->keys[mmie_keyidx]); - } else if (!ieee80211_has_protected(fc)) { - /* - * The frame was not protected, so skip decryption. However, we - * need to set rx->key if there is a key that could have been - * used so that the frame may be dropped if encryption would - * have been expected. - */ - struct ieee80211_key *key = NULL; - struct ieee80211_sub_if_data *sdata = rx->sdata; - int i; - - if (ieee80211_is_mgmt(fc) && - is_multicast_ether_addr(hdr->addr1) && - (key = rcu_dereference(rx->sdata->default_mgmt_key))) - rx->key = key; - else { - if (rx->sta) { - for (i = 0; i < NUM_DEFAULT_KEYS; i++) { - key = rcu_dereference(rx->sta->gtk[i]); - if (key) - break; - } - } - if (!key) { - for (i = 0; i < NUM_DEFAULT_KEYS; i++) { - key = rcu_dereference(sdata->keys[i]); - if (key) - break; - } - } - if (key) - rx->key = key; - } - return RX_CONTINUE; - } else { - u8 keyid; - /* - * The device doesn't give us the IV so we won't be - * able to look up the key. That's ok though, we - * don't need to decrypt the frame, we just won't - * be able to keep statistics accurate. - * Except for key threshold notifications, should - * we somehow allow the driver to tell us which key - * the hardware used if this flag is set? - */ - if ((status->flag & RX_FLAG_DECRYPTED) && - (status->flag & RX_FLAG_IV_STRIPPED)) - return RX_CONTINUE; - - hdrlen = ieee80211_hdrlen(fc); - - if (rx->skb->len < 8 + hdrlen) - return RX_DROP_UNUSABLE; /* TODO: count this? */ - - /* - * no need to call ieee80211_wep_get_keyidx, - * it verifies a bunch of things we've done already - */ - skb_copy_bits(rx->skb, hdrlen + 3, &keyid, 1); - keyidx = keyid >> 6; - - /* check per-station GTK first, if multicast packet */ - if (is_multicast_ether_addr(hdr->addr1) && rx->sta) - rx->key = rcu_dereference(rx->sta->gtk[keyidx]); - - /* if not found, try default key */ - if (!rx->key) { - rx->key = rcu_dereference(rx->sdata->keys[keyidx]); - - /* - * RSNA-protected unicast frames should always be - * sent with pairwise or station-to-station keys, - * but for WEP we allow using a key index as well. - */ - if (rx->key && - rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP40 && - rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP104 && - !is_multicast_ether_addr(hdr->addr1)) - rx->key = NULL; - } - } - - if (rx->key) { - if (unlikely(rx->key->flags & KEY_FLAG_TAINTED)) - return RX_DROP_MONITOR; - - rx->key->tx_rx_count++; - /* TODO: add threshold stuff again */ - } else { - return RX_DROP_MONITOR; - } - - switch (rx->key->conf.cipher) { - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - result = ieee80211_crypto_wep_decrypt(rx); - break; - case WLAN_CIPHER_SUITE_TKIP: - result = ieee80211_crypto_tkip_decrypt(rx); - break; - case WLAN_CIPHER_SUITE_CCMP: - result = ieee80211_crypto_ccmp_decrypt(rx); - break; - case WLAN_CIPHER_SUITE_AES_CMAC: - result = ieee80211_crypto_aes_cmac_decrypt(rx); - break; - default: - /* - * We can reach here only with HW-only algorithms - * but why didn't it decrypt the frame?! - */ - return RX_DROP_UNUSABLE; - } - - /* the hdr variable is invalid after the decrypt handlers */ - - /* either the frame has been decrypted or will be dropped */ - status->flag |= RX_FLAG_DECRYPTED; - - return result; -} - -static ieee80211_rx_result debug_noinline ieee80211_rx_h_check_more_data(struct ieee80211_rx_data *rx) { struct ieee80211_local *local; @@ -1550,6 +1349,207 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) return RX_CONTINUE; } /* ieee80211_rx_h_sta_process */ +static ieee80211_rx_result debug_noinline +ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) +{ + struct sk_buff *skb = rx->skb; + struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + int keyidx; + int hdrlen; + ieee80211_rx_result result = RX_DROP_UNUSABLE; + struct ieee80211_key *sta_ptk = NULL; + int mmie_keyidx = -1; + __le16 fc; + + /* + * Key selection 101 + * + * There are four types of keys: + * - GTK (group keys) + * - IGTK (group keys for management frames) + * - PTK (pairwise keys) + * - STK (station-to-station pairwise keys) + * + * When selecting a key, we have to distinguish between multicast + * (including broadcast) and unicast frames, the latter can only + * use PTKs and STKs while the former always use GTKs and IGTKs. + * Unless, of course, actual WEP keys ("pre-RSNA") are used, then + * unicast frames can also use key indices like GTKs. Hence, if we + * don't have a PTK/STK we check the key index for a WEP key. + * + * Note that in a regular BSS, multicast frames are sent by the + * AP only, associated stations unicast the frame to the AP first + * which then multicasts it on their behalf. + * + * There is also a slight problem in IBSS mode: GTKs are negotiated + * with each station, that is something we don't currently handle. + * The spec seems to expect that one negotiates the same key with + * every station but there's no such requirement; VLANs could be + * possible. + */ + + /* + * No point in finding a key and decrypting if the frame is neither + * addressed to us nor a multicast frame. + */ + if (!(status->rx_flags & IEEE80211_RX_RA_MATCH)) + return RX_CONTINUE; + + /* start without a key */ + rx->key = NULL; + + if (rx->sta) + sta_ptk = rcu_dereference(rx->sta->ptk); + + fc = hdr->frame_control; + + if (!ieee80211_has_protected(fc)) + mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb); + + if (!is_multicast_ether_addr(hdr->addr1) && sta_ptk) { + rx->key = sta_ptk; + if ((status->flag & RX_FLAG_DECRYPTED) && + (status->flag & RX_FLAG_IV_STRIPPED)) + return RX_CONTINUE; + /* Skip decryption if the frame is not protected. */ + if (!ieee80211_has_protected(fc)) + return RX_CONTINUE; + } else if (mmie_keyidx >= 0) { + /* Broadcast/multicast robust management frame / BIP */ + if ((status->flag & RX_FLAG_DECRYPTED) && + (status->flag & RX_FLAG_IV_STRIPPED)) + return RX_CONTINUE; + + if (mmie_keyidx < NUM_DEFAULT_KEYS || + mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) + return RX_DROP_MONITOR; /* unexpected BIP keyidx */ + if (rx->sta) + rx->key = rcu_dereference(rx->sta->gtk[mmie_keyidx]); + if (!rx->key) + rx->key = rcu_dereference(rx->sdata->keys[mmie_keyidx]); + } else if (!ieee80211_has_protected(fc)) { + /* + * The frame was not protected, so skip decryption. However, we + * need to set rx->key if there is a key that could have been + * used so that the frame may be dropped if encryption would + * have been expected. + */ + struct ieee80211_key *key = NULL; + struct ieee80211_sub_if_data *sdata = rx->sdata; + int i; + + if (ieee80211_is_mgmt(fc) && + is_multicast_ether_addr(hdr->addr1) && + (key = rcu_dereference(rx->sdata->default_mgmt_key))) + rx->key = key; + else { + if (rx->sta) { + for (i = 0; i < NUM_DEFAULT_KEYS; i++) { + key = rcu_dereference(rx->sta->gtk[i]); + if (key) + break; + } + } + if (!key) { + for (i = 0; i < NUM_DEFAULT_KEYS; i++) { + key = rcu_dereference(sdata->keys[i]); + if (key) + break; + } + } + if (key) + rx->key = key; + } + return RX_CONTINUE; + } else { + u8 keyid; + /* + * The device doesn't give us the IV so we won't be + * able to look up the key. That's ok though, we + * don't need to decrypt the frame, we just won't + * be able to keep statistics accurate. + * Except for key threshold notifications, should + * we somehow allow the driver to tell us which key + * the hardware used if this flag is set? + */ + if ((status->flag & RX_FLAG_DECRYPTED) && + (status->flag & RX_FLAG_IV_STRIPPED)) + return RX_CONTINUE; + + hdrlen = ieee80211_hdrlen(fc); + + if (rx->skb->len < 8 + hdrlen) + return RX_DROP_UNUSABLE; /* TODO: count this? */ + + /* + * no need to call ieee80211_wep_get_keyidx, + * it verifies a bunch of things we've done already + */ + skb_copy_bits(rx->skb, hdrlen + 3, &keyid, 1); + keyidx = keyid >> 6; + + /* check per-station GTK first, if multicast packet */ + if (is_multicast_ether_addr(hdr->addr1) && rx->sta) + rx->key = rcu_dereference(rx->sta->gtk[keyidx]); + + /* if not found, try default key */ + if (!rx->key) { + rx->key = rcu_dereference(rx->sdata->keys[keyidx]); + + /* + * RSNA-protected unicast frames should always be + * sent with pairwise or station-to-station keys, + * but for WEP we allow using a key index as well. + */ + if (rx->key && + rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP40 && + rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP104 && + !is_multicast_ether_addr(hdr->addr1)) + rx->key = NULL; + } + } + + if (rx->key) { + if (unlikely(rx->key->flags & KEY_FLAG_TAINTED)) + return RX_DROP_MONITOR; + + rx->key->tx_rx_count++; + /* TODO: add threshold stuff again */ + } else { + return RX_DROP_MONITOR; + } + + switch (rx->key->conf.cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + result = ieee80211_crypto_wep_decrypt(rx); + break; + case WLAN_CIPHER_SUITE_TKIP: + result = ieee80211_crypto_tkip_decrypt(rx); + break; + case WLAN_CIPHER_SUITE_CCMP: + result = ieee80211_crypto_ccmp_decrypt(rx); + break; + case WLAN_CIPHER_SUITE_AES_CMAC: + result = ieee80211_crypto_aes_cmac_decrypt(rx); + break; + default: + /* + * We can reach here only with HW-only algorithms + * but why didn't it decrypt the frame?! + */ + return RX_DROP_UNUSABLE; + } + + /* the hdr variable is invalid after the decrypt handlers */ + + /* either the frame has been decrypted or will be dropped */ + status->flag |= RX_FLAG_DECRYPTED; + + return result; +} + static inline struct ieee80211_fragment_entry * ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata, unsigned int frag, unsigned int seq, int rx_queue, @@ -2933,10 +2933,10 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx, */ rx->skb = skb; - CALL_RXH(ieee80211_rx_h_decrypt) CALL_RXH(ieee80211_rx_h_check_more_data) CALL_RXH(ieee80211_rx_h_uapsd_and_pspoll) CALL_RXH(ieee80211_rx_h_sta_process) + CALL_RXH(ieee80211_rx_h_decrypt) CALL_RXH(ieee80211_rx_h_defragment) CALL_RXH(ieee80211_rx_h_michael_mic_verify) /* must be after MMIC verify so header is counted in MPDU mic */ -- cgit v0.10.2 From d51b70ff5122d31e27733ba03c3afd62bb86bd63 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 9 Aug 2013 16:35:17 +0200 Subject: mac80211: move ibss presp generation in own function Channel Switch will later require to generate beacons without setting them immediately. Therefore split the presp generation in an own function. Splitting the original very long function might be a good idea anyway. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 79e294e..74de0f1 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -34,13 +34,12 @@ #define IEEE80211_IBSS_MAX_STA_ENTRIES 128 - -static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, - const u8 *bssid, const int beacon_int, - struct ieee80211_channel *chan, - const u32 basic_rates, - const u16 capability, u64 tsf, - bool creator) +static struct beacon_data * +ieee80211_ibss_build_presp(struct ieee80211_sub_if_data *sdata, + const int beacon_int, const u32 basic_rates, + const u16 capability, u64 tsf, + struct cfg80211_chan_def *chandef, + bool *have_higher_than_11mbit) { struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; @@ -48,70 +47,11 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; u8 *pos; struct ieee80211_supported_band *sband; - struct cfg80211_bss *bss; - u32 bss_change, rate_flags, rates = 0, rates_added = 0; - struct cfg80211_chan_def chandef; - enum nl80211_bss_scan_width scan_width; - bool have_higher_than_11mbit = false; + u32 rate_flags, rates = 0, rates_added = 0; struct beacon_data *presp; int frame_len; int shift; - sdata_assert_lock(sdata); - - /* Reset own TSF to allow time synchronization work. */ - drv_reset_tsf(local, sdata); - - if (!ether_addr_equal(ifibss->bssid, bssid)) - sta_info_flush(sdata); - - /* if merging, indicate to driver that we leave the old IBSS */ - if (sdata->vif.bss_conf.ibss_joined) { - sdata->vif.bss_conf.ibss_joined = false; - sdata->vif.bss_conf.ibss_creator = false; - sdata->vif.bss_conf.enable_beacon = false; - netif_carrier_off(sdata->dev); - ieee80211_bss_info_change_notify(sdata, - BSS_CHANGED_IBSS | - BSS_CHANGED_BEACON_ENABLED); - } - - presp = rcu_dereference_protected(ifibss->presp, - lockdep_is_held(&sdata->wdev.mtx)); - rcu_assign_pointer(ifibss->presp, NULL); - if (presp) - kfree_rcu(presp, rcu_head); - - sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; - - chandef = ifibss->chandef; - if (!cfg80211_reg_can_beacon(local->hw.wiphy, &chandef)) { - if (chandef.width == NL80211_CHAN_WIDTH_5 || - chandef.width == NL80211_CHAN_WIDTH_10 || - chandef.width == NL80211_CHAN_WIDTH_20_NOHT || - chandef.width == NL80211_CHAN_WIDTH_20) { - sdata_info(sdata, - "Failed to join IBSS, beacons forbidden\n"); - return; - } - chandef.width = NL80211_CHAN_WIDTH_20; - chandef.center_freq1 = chan->center_freq; - } - - ieee80211_vif_release_channel(sdata); - if (ieee80211_vif_use_channel(sdata, &chandef, - ifibss->fixed_channel ? - IEEE80211_CHANCTX_SHARED : - IEEE80211_CHANCTX_EXCLUSIVE)) { - sdata_info(sdata, "Failed to join IBSS, no channel context\n"); - return; - } - - memcpy(ifibss->bssid, bssid, ETH_ALEN); - - sband = local->hw.wiphy->bands[chan->band]; - shift = ieee80211_vif_get_shift(&sdata->vif); - /* Build IBSS probe response */ frame_len = sizeof(struct ieee80211_hdr_3addr) + 12 /* struct ieee80211_mgmt.u.beacon */ + @@ -125,7 +65,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, ifibss->ie_len; presp = kzalloc(sizeof(*presp) + frame_len, GFP_KERNEL); if (!presp) - return; + return NULL; presp->head = (void *)(presp + 1); @@ -146,12 +86,19 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, memcpy(pos, ifibss->ssid, ifibss->ssid_len); pos += ifibss->ssid_len; - rate_flags = ieee80211_chandef_rate_flags(&chandef); + sband = local->hw.wiphy->bands[chandef->chan->band]; + rate_flags = ieee80211_chandef_rate_flags(chandef); + shift = ieee80211_chandef_get_shift(chandef); + rates_n = 0; + if (have_higher_than_11mbit) + *have_higher_than_11mbit = false; + for (i = 0; i < sband->n_bitrates; i++) { if ((rate_flags & sband->bitrates[i].flags) != rate_flags) continue; - if (sband->bitrates[i].bitrate > 110) - have_higher_than_11mbit = true; + if (sband->bitrates[i].bitrate > 110 && + have_higher_than_11mbit) + *have_higher_than_11mbit = true; rates |= BIT(i); rates_n++; @@ -178,7 +125,8 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, if (sband->band == IEEE80211_BAND_2GHZ) { *pos++ = WLAN_EID_DS_PARAMS; *pos++ = 1; - *pos++ = ieee80211_frequency_to_channel(chan->center_freq); + *pos++ = ieee80211_frequency_to_channel( + chandef->chan->center_freq); } *pos++ = WLAN_EID_IBSS_PARAMS; @@ -210,9 +158,9 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, } /* add HT capability and information IEs */ - if (chandef.width != NL80211_CHAN_WIDTH_20_NOHT && - chandef.width != NL80211_CHAN_WIDTH_5 && - chandef.width != NL80211_CHAN_WIDTH_10 && + if (chandef->width != NL80211_CHAN_WIDTH_20_NOHT && + chandef->width != NL80211_CHAN_WIDTH_5 && + chandef->width != NL80211_CHAN_WIDTH_10 && sband->ht_cap.ht_supported) { struct ieee80211_sta_ht_cap ht_cap; @@ -226,7 +174,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, * keep them at 0 */ pos = ieee80211_ie_build_ht_oper(pos, &sband->ht_cap, - &chandef, 0); + chandef, 0); } if (local->hw.queues >= IEEE80211_NUM_ACS) { @@ -243,9 +191,94 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, presp->head_len = pos - presp->head; if (WARN_ON(presp->head_len > frame_len)) + goto error; + + return presp; +error: + kfree(presp); + return NULL; +} + +static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, + const u8 *bssid, const int beacon_int, + struct ieee80211_channel *chan, + const u32 basic_rates, + const u16 capability, u64 tsf, + bool creator) +{ + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; + struct ieee80211_local *local = sdata->local; + struct ieee80211_supported_band *sband; + struct ieee80211_mgmt *mgmt; + struct cfg80211_bss *bss; + u32 bss_change; + struct cfg80211_chan_def chandef; + struct beacon_data *presp; + enum nl80211_bss_scan_width scan_width; + bool have_higher_than_11mbit; + + sdata_assert_lock(sdata); + + /* Reset own TSF to allow time synchronization work. */ + drv_reset_tsf(local, sdata); + + if (!ether_addr_equal(ifibss->bssid, bssid)) + sta_info_flush(sdata); + + /* if merging, indicate to driver that we leave the old IBSS */ + if (sdata->vif.bss_conf.ibss_joined) { + sdata->vif.bss_conf.ibss_joined = false; + sdata->vif.bss_conf.ibss_creator = false; + sdata->vif.bss_conf.enable_beacon = false; + netif_carrier_off(sdata->dev); + ieee80211_bss_info_change_notify(sdata, + BSS_CHANGED_IBSS | + BSS_CHANGED_BEACON_ENABLED); + } + + presp = rcu_dereference_protected(ifibss->presp, + lockdep_is_held(&sdata->wdev.mtx)); + rcu_assign_pointer(ifibss->presp, NULL); + if (presp) + kfree_rcu(presp, rcu_head); + + sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; + + chandef = ifibss->chandef; + if (!cfg80211_reg_can_beacon(local->hw.wiphy, &chandef)) { + if (chandef.width == NL80211_CHAN_WIDTH_5 || + chandef.width == NL80211_CHAN_WIDTH_10 || + chandef.width == NL80211_CHAN_WIDTH_20_NOHT || + chandef.width == NL80211_CHAN_WIDTH_20) { + sdata_info(sdata, + "Failed to join IBSS, beacons forbidden\n"); + return; + } + chandef.width = NL80211_CHAN_WIDTH_20; + chandef.center_freq1 = chan->center_freq; + } + + ieee80211_vif_release_channel(sdata); + if (ieee80211_vif_use_channel(sdata, &chandef, + ifibss->fixed_channel ? + IEEE80211_CHANCTX_SHARED : + IEEE80211_CHANCTX_EXCLUSIVE)) { + sdata_info(sdata, "Failed to join IBSS, no channel context\n"); + return; + } + + memcpy(ifibss->bssid, bssid, ETH_ALEN); + + sband = local->hw.wiphy->bands[chan->band]; + + presp = ieee80211_ibss_build_presp(sdata, beacon_int, basic_rates, + capability, tsf, &chandef, + &have_higher_than_11mbit); + if (!presp) return; rcu_assign_pointer(ifibss->presp, presp); + mgmt = (void *)presp->head; sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.beacon_int = beacon_int; -- cgit v0.10.2 From 27b3eb9c06a7193bdc9800cd00764a130343bc8a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 7 Aug 2013 20:11:55 +0200 Subject: mac80211: add APIs to allow keeping connections after WoWLAN In order to be able to (securely) keep connections alive after the system was suspended for WoWLAN, we need some additional APIs. We already have API (ieee80211_gtk_rekey_notify) to tell wpa_supplicant about the new replay counter if GTK rekeying was done by the device while the host was asleep, but that's not sufficient. If GTK rekeying wasn't done, we need to tell the host about sequence counters for the GTK (and PTK regardless of rekeying) that was used while asleep, add ieee80211_set_key_rx_seq() for that. If GTK rekeying was done, then we need to be able to disable the old keys (with ieee80211_remove_key()) and allocate the new GTK key(s) in mac80211 (with ieee80211_gtk_rekey_add()). If protocol offload (e.g. ARP) is implemented, then also the TX sequence counter for the PTK must be updated, using the new ieee80211_set_key_tx_seq() function. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index df93c77..e3e3037 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3688,6 +3688,89 @@ void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf, int tid, struct ieee80211_key_seq *seq); /** + * ieee80211_set_key_tx_seq - set key TX sequence counter + * + * @keyconf: the parameter passed with the set key + * @seq: new sequence data + * + * This function allows a driver to set the current TX IV/PNs for the + * given key. This is useful when resuming from WoWLAN sleep and the + * device may have transmitted frames using the PTK, e.g. replies to + * ARP requests. + * + * Note that this function may only be called when no TX processing + * can be done concurrently. + */ +void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf, + struct ieee80211_key_seq *seq); + +/** + * ieee80211_set_key_rx_seq - set key RX sequence counter + * + * @keyconf: the parameter passed with the set key + * @tid: The TID, or -1 for the management frame value (CCMP only); + * the value on TID 0 is also used for non-QoS frames. For + * CMAC, only TID 0 is valid. + * @seq: new sequence data + * + * This function allows a driver to set the current RX IV/PNs for the + * given key. This is useful when resuming from WoWLAN sleep and GTK + * rekey may have been done while suspended. It should not be called + * if IV checking is done by the device and not by mac80211. + * + * Note that this function may only be called when no RX processing + * can be done concurrently. + */ +void ieee80211_set_key_rx_seq(struct ieee80211_key_conf *keyconf, + int tid, struct ieee80211_key_seq *seq); + +/** + * ieee80211_remove_key - remove the given key + * @keyconf: the parameter passed with the set key + * + * Remove the given key. If the key was uploaded to the hardware at the + * time this function is called, it is not deleted in the hardware but + * instead assumed to have been removed already. + * + * Note that due to locking considerations this function can (currently) + * only be called during key iteration (ieee80211_iter_keys().) + */ +void ieee80211_remove_key(struct ieee80211_key_conf *keyconf); + +/** + * ieee80211_gtk_rekey_add - add a GTK key from rekeying during WoWLAN + * @vif: the virtual interface to add the key on + * @keyconf: new key data + * + * When GTK rekeying was done while the system was suspended, (a) new + * key(s) will be available. These will be needed by mac80211 for proper + * RX processing, so this function allows setting them. + * + * The function returns the newly allocated key structure, which will + * have similar contents to the passed key configuration but point to + * mac80211-owned memory. In case of errors, the function returns an + * ERR_PTR(), use IS_ERR() etc. + * + * Note that this function assumes the key isn't added to hardware + * acceleration, so no TX will be done with the key. Since it's a GTK + * on managed (station) networks, this is true anyway. If the driver + * calls this function from the resume callback and subsequently uses + * the return code 1 to reconfigure the device, this key will be part + * of the reconfiguration. + * + * Note that the driver should also call ieee80211_set_key_rx_seq() + * for the new key for each TID to set up sequence counters properly. + * + * IMPORTANT: If this replaces a key that is present in the hardware, + * then it will attempt to remove it during this call. In many cases + * this isn't what you want, so call ieee80211_remove_key() first for + * the key that's being replaced. + */ +struct ieee80211_key_conf * +ieee80211_gtk_rekey_add(struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf); + +/** * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying * @vif: virtual interface the rekeying was done on * @bssid: The BSSID of the AP, for checking association diff --git a/net/mac80211/key.c b/net/mac80211/key.c index e39cc91..620677e 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -93,6 +93,9 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key) might_sleep(); + if (key->flags & KEY_FLAG_TAINTED) + return -EINVAL; + if (!key->local->ops->set_key) goto out_unsupported; @@ -455,6 +458,7 @@ int ieee80211_key_link(struct ieee80211_key *key, struct ieee80211_sub_if_data *sdata, struct sta_info *sta) { + struct ieee80211_local *local = sdata->local; struct ieee80211_key *old_key; int idx, ret; bool pairwise; @@ -484,10 +488,13 @@ int ieee80211_key_link(struct ieee80211_key *key, ieee80211_debugfs_key_add(key); - ret = ieee80211_key_enable_hw_accel(key); - - if (ret) - ieee80211_key_free(key, true); + if (!local->wowlan) { + ret = ieee80211_key_enable_hw_accel(key); + if (ret) + ieee80211_key_free(key, true); + } else { + ret = 0; + } mutex_unlock(&sdata->local->key_mtx); @@ -540,7 +547,7 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw, void *iter_data) { struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_key *key; + struct ieee80211_key *key, *tmp; struct ieee80211_sub_if_data *sdata; ASSERT_RTNL(); @@ -548,13 +555,14 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw, mutex_lock(&local->key_mtx); if (vif) { sdata = vif_to_sdata(vif); - list_for_each_entry(key, &sdata->key_list, list) + list_for_each_entry_safe(key, tmp, &sdata->key_list, list) iter(hw, &sdata->vif, key->sta ? &key->sta->sta : NULL, &key->conf, iter_data); } else { list_for_each_entry(sdata, &local->interfaces, list) - list_for_each_entry(key, &sdata->key_list, list) + list_for_each_entry_safe(key, tmp, + &sdata->key_list, list) iter(hw, &sdata->vif, key->sta ? &key->sta->sta : NULL, &key->conf, iter_data); @@ -751,3 +759,135 @@ void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf, } } EXPORT_SYMBOL(ieee80211_get_key_rx_seq); + +void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf, + struct ieee80211_key_seq *seq) +{ + struct ieee80211_key *key; + u64 pn64; + + key = container_of(keyconf, struct ieee80211_key, conf); + + switch (key->conf.cipher) { + case WLAN_CIPHER_SUITE_TKIP: + key->u.tkip.tx.iv32 = seq->tkip.iv32; + key->u.tkip.tx.iv16 = seq->tkip.iv16; + break; + case WLAN_CIPHER_SUITE_CCMP: + pn64 = (u64)seq->ccmp.pn[5] | + ((u64)seq->ccmp.pn[4] << 8) | + ((u64)seq->ccmp.pn[3] << 16) | + ((u64)seq->ccmp.pn[2] << 24) | + ((u64)seq->ccmp.pn[1] << 32) | + ((u64)seq->ccmp.pn[0] << 40); + atomic64_set(&key->u.ccmp.tx_pn, pn64); + break; + case WLAN_CIPHER_SUITE_AES_CMAC: + pn64 = (u64)seq->aes_cmac.pn[5] | + ((u64)seq->aes_cmac.pn[4] << 8) | + ((u64)seq->aes_cmac.pn[3] << 16) | + ((u64)seq->aes_cmac.pn[2] << 24) | + ((u64)seq->aes_cmac.pn[1] << 32) | + ((u64)seq->aes_cmac.pn[0] << 40); + atomic64_set(&key->u.aes_cmac.tx_pn, pn64); + break; + default: + WARN_ON(1); + break; + } +} +EXPORT_SYMBOL_GPL(ieee80211_set_key_tx_seq); + +void ieee80211_set_key_rx_seq(struct ieee80211_key_conf *keyconf, + int tid, struct ieee80211_key_seq *seq) +{ + struct ieee80211_key *key; + u8 *pn; + + key = container_of(keyconf, struct ieee80211_key, conf); + + switch (key->conf.cipher) { + case WLAN_CIPHER_SUITE_TKIP: + if (WARN_ON(tid < 0 || tid >= IEEE80211_NUM_TIDS)) + return; + key->u.tkip.rx[tid].iv32 = seq->tkip.iv32; + key->u.tkip.rx[tid].iv16 = seq->tkip.iv16; + break; + case WLAN_CIPHER_SUITE_CCMP: + if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS)) + return; + if (tid < 0) + pn = key->u.ccmp.rx_pn[IEEE80211_NUM_TIDS]; + else + pn = key->u.ccmp.rx_pn[tid]; + memcpy(pn, seq->ccmp.pn, IEEE80211_CCMP_PN_LEN); + break; + case WLAN_CIPHER_SUITE_AES_CMAC: + if (WARN_ON(tid != 0)) + return; + pn = key->u.aes_cmac.rx_pn; + memcpy(pn, seq->aes_cmac.pn, IEEE80211_CMAC_PN_LEN); + break; + default: + WARN_ON(1); + break; + } +} +EXPORT_SYMBOL_GPL(ieee80211_set_key_rx_seq); + +void ieee80211_remove_key(struct ieee80211_key_conf *keyconf) +{ + struct ieee80211_key *key; + + key = container_of(keyconf, struct ieee80211_key, conf); + + assert_key_lock(key->local); + + /* + * if key was uploaded, we assume the driver will/has remove(d) + * it, so adjust bookkeeping accordingly + */ + if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) { + key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE; + + if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) || + (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) || + (key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE))) + increment_tailroom_need_count(key->sdata); + } + + ieee80211_key_free(key, false); +} +EXPORT_SYMBOL_GPL(ieee80211_remove_key); + +struct ieee80211_key_conf * +ieee80211_gtk_rekey_add(struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + struct ieee80211_local *local = sdata->local; + struct ieee80211_key *key; + int err; + + if (WARN_ON(!local->wowlan)) + return ERR_PTR(-EINVAL); + + if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) + return ERR_PTR(-EINVAL); + + key = ieee80211_key_alloc(keyconf->cipher, keyconf->keyidx, + keyconf->keylen, keyconf->key, + 0, NULL); + if (IS_ERR(key)) + return ERR_PTR(PTR_ERR(key)); + + if (sdata->u.mgd.mfp != IEEE80211_MFP_DISABLED) + key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; + + err = ieee80211_key_link(key, sdata, NULL); + if (err) + return ERR_PTR(err); + + return &key->conf; +} +EXPORT_SYMBOL_GPL(ieee80211_gtk_rekey_add); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index d23c5a7..e1b34a1 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1453,8 +1453,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) local->resuming = true; if (local->wowlan) { - local->wowlan = false; res = drv_resume(local); + local->wowlan = false; if (res < 0) { local->resuming = false; return res; -- cgit v0.10.2 From 92367fe7f24159d6ba83276bc7a0f45c6f663837 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 14 Aug 2013 08:01:30 +0200 Subject: ath9k: always use SIFS times from OFDM for 5/10 MHz 5/10 MHz channels should always use SIFS times as defined in IEEE 802.11-2012 18.4.4 (OFDM PHY characteristics). This makes it compatible to ath5k, which does the same. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 151443b..b3a6891 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1069,7 +1069,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) if (IS_CHAN_A_FAST_CLOCK(ah, chan)) tx_lat += 11; - sifstime *= 2; + sifstime = 32; ack_offset = 16; slottime = 13; } else if (IS_CHAN_QUARTER_RATE(chan)) { @@ -1079,7 +1079,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) if (IS_CHAN_A_FAST_CLOCK(ah, chan)) tx_lat += 22; - sifstime *= 4; + sifstime = 64; ack_offset = 32; slottime = 21; } else { @@ -1116,7 +1116,6 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) ctstimeout += 48 - sifstime - ah->slottime; } - ath9k_hw_set_sifs_time(ah, sifstime); ath9k_hw_setslottime(ah, slottime); ath9k_hw_set_ack_timeout(ah, acktimeout); -- cgit v0.10.2 From 0671894f977b6f03b63fddc33743474f495db4eb Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 16 Aug 2013 10:46:04 +0200 Subject: ath9k: use chandef instead of channel_type To enable support for 5/10 MHz, some internal functions must be converted from using the (old) channel_type to chandef. This is a good chance to change all remaining occurences. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c index 344fdde..d3063c2 100644 --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -49,37 +49,40 @@ int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb) } EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_keytype); -static u32 ath9k_get_extchanmode(struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type) +static u32 ath9k_get_extchanmode(struct cfg80211_chan_def *chandef) { u32 chanmode = 0; - switch (chan->band) { + switch (chandef->chan->band) { case IEEE80211_BAND_2GHZ: - switch (channel_type) { - case NL80211_CHAN_NO_HT: - case NL80211_CHAN_HT20: + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: chanmode = CHANNEL_G_HT20; break; - case NL80211_CHAN_HT40PLUS: - chanmode = CHANNEL_G_HT40PLUS; + case NL80211_CHAN_WIDTH_40: + if (chandef->center_freq1 > chandef->chan->center_freq) + chanmode = CHANNEL_G_HT40PLUS; + else + chanmode = CHANNEL_G_HT40MINUS; break; - case NL80211_CHAN_HT40MINUS: - chanmode = CHANNEL_G_HT40MINUS; + default: break; } break; case IEEE80211_BAND_5GHZ: - switch (channel_type) { - case NL80211_CHAN_NO_HT: - case NL80211_CHAN_HT20: + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: chanmode = CHANNEL_A_HT20; break; - case NL80211_CHAN_HT40PLUS: - chanmode = CHANNEL_A_HT40PLUS; + case NL80211_CHAN_WIDTH_40: + if (chandef->center_freq1 > chandef->chan->center_freq) + chanmode = CHANNEL_A_HT40PLUS; + else + chanmode = CHANNEL_A_HT40MINUS; break; - case NL80211_CHAN_HT40MINUS: - chanmode = CHANNEL_A_HT40MINUS; + default: break; } break; @@ -94,13 +97,12 @@ static u32 ath9k_get_extchanmode(struct ieee80211_channel *chan, * Update internal channel flags. */ void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan, - struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type) + struct cfg80211_chan_def *chandef) { - ichan->channel = chan->center_freq; - ichan->chan = chan; + ichan->channel = chandef->chan->center_freq; + ichan->chan = chandef->chan; - if (chan->band == IEEE80211_BAND_2GHZ) { + if (chandef->chan->band == IEEE80211_BAND_2GHZ) { ichan->chanmode = CHANNEL_G; ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM; } else { @@ -108,8 +110,22 @@ void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan, ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM; } - if (channel_type != NL80211_CHAN_NO_HT) - ichan->chanmode = ath9k_get_extchanmode(chan, channel_type); + switch (chandef->width) { + case NL80211_CHAN_WIDTH_5: + ichan->channelFlags |= CHANNEL_QUARTER; + break; + case NL80211_CHAN_WIDTH_10: + ichan->channelFlags |= CHANNEL_HALF; + break; + case NL80211_CHAN_WIDTH_20_NOHT: + break; + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + ichan->chanmode = ath9k_get_extchanmode(chandef); + break; + default: + WARN_ON(1); + } } EXPORT_SYMBOL(ath9k_cmn_update_ichannel); @@ -125,8 +141,7 @@ struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw, chan_idx = curchan->hw_value; channel = &ah->channels[chan_idx]; - ath9k_cmn_update_ichannel(channel, curchan, - cfg80211_get_chandef_type(&hw->conf.chandef)); + ath9k_cmn_update_ichannel(channel, &hw->conf.chandef); return channel; } diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h index 207d069..e039bcb 100644 --- a/drivers/net/wireless/ath/ath9k/common.h +++ b/drivers/net/wireless/ath/ath9k/common.h @@ -44,8 +44,7 @@ int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb); void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan, - struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type); + struct cfg80211_chan_def *chandef); struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw, struct ath_hw *ah); int ath9k_cmn_count_streams(unsigned int chainmask, int max); diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 5c1bec1..d442581 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1203,16 +1203,13 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed) if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || chip_reset) { struct ieee80211_channel *curchan = hw->conf.chandef.chan; - enum nl80211_channel_type channel_type = - cfg80211_get_chandef_type(&hw->conf.chandef); int pos = curchan->hw_value; ath_dbg(common, CONFIG, "Set channel: %d MHz\n", curchan->center_freq); ath9k_cmn_update_ichannel(&priv->ah->channels[pos], - hw->conf.chandef.chan, - channel_type); + &hw->conf.chandef); if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) { ath_err(common, "Unable to set channel\n"); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 3b56c2e..85015bf 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -726,13 +726,15 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band) struct ieee80211_supported_band *sband; struct ieee80211_channel *chan; struct ath_hw *ah = sc->sc_ah; + struct cfg80211_chan_def chandef; int i; sband = &sc->sbands[band]; for (i = 0; i < sband->n_channels; i++) { chan = &sband->channels[i]; ah->curchan = &ah->channels[chan->hw_value]; - ath9k_cmn_update_ichannel(ah->curchan, chan, NL80211_CHAN_HT20); + cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_HT20); + ath9k_cmn_update_ichannel(ah->curchan, &chandef); ath9k_hw_set_txpowerlimit(ah, MAX_RATE_POWER, true); } } diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 0bee105..ba382a8 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1201,8 +1201,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) { struct ieee80211_channel *curchan = hw->conf.chandef.chan; - enum nl80211_channel_type channel_type = - cfg80211_get_chandef_type(&conf->chandef); int pos = curchan->hw_value; int old_pos = -1; unsigned long flags; @@ -1210,8 +1208,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) if (ah->curchan) old_pos = ah->curchan - &ah->channels[0]; - ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n", - curchan->center_freq, channel_type); + ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n", + curchan->center_freq, hw->conf.chandef.width); /* update survey stats for the old channel before switching */ spin_lock_irqsave(&common->cc_lock, flags); @@ -1219,7 +1217,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) spin_unlock_irqrestore(&common->cc_lock, flags); ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos], - curchan, channel_type); + &conf->chandef); /* * If the operating channel changes, change the survey in-use flags diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index a3c4ca0..7e86abb 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1326,8 +1326,8 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband, ath_rc_init(sc, priv_sta); ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG, - "Operating HT Bandwidth changed to: %d\n", - cfg80211_get_chandef_type(&sc->hw->conf.chandef)); + "Operating Bandwidth changed to: %d\n", + sc->hw->conf.chandef.width); } } -- cgit v0.10.2 From f819c0e72951f9238c53d6b7675bbd7a82c78b83 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 14 Aug 2013 08:01:32 +0200 Subject: ath9k: report 5/10 MHz channels Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 653f7fc..4ee472a 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -852,6 +852,17 @@ static int ath9k_process_rate(struct ath_common *common, band = hw->conf.chandef.chan->band; sband = hw->wiphy->bands[band]; + switch (hw->conf.chandef.width) { + case NL80211_CHAN_WIDTH_5: + rxs->flag |= RX_FLAG_5MHZ; + break; + case NL80211_CHAN_WIDTH_10: + rxs->flag |= RX_FLAG_10MHZ; + break; + default: + break; + } + if (rx_stats->rs_rate & 0x80) { /* HT rate */ rxs->flag |= RX_FLAG_HT; -- cgit v0.10.2 From 67a5533015be005caff61ee9cae42920a54e3a9b Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 14 Aug 2013 08:01:33 +0200 Subject: ath9k: set 5/10 MHz supported channels and fix bitrate Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 85015bf..6347378 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -146,14 +146,22 @@ static struct ieee80211_rate ath9k_legacy_rates[] = { RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE), RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE), RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE), - RATE(60, 0x0b, 0), - RATE(90, 0x0f, 0), - RATE(120, 0x0a, 0), - RATE(180, 0x0e, 0), - RATE(240, 0x09, 0), - RATE(360, 0x0d, 0), - RATE(480, 0x08, 0), - RATE(540, 0x0c, 0), + RATE(60, 0x0b, (IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ)), + RATE(90, 0x0f, (IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ)), + RATE(120, 0x0a, (IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ)), + RATE(180, 0x0e, (IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ)), + RATE(240, 0x09, (IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ)), + RATE(360, 0x0d, (IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ)), + RATE(480, 0x08, (IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ)), + RATE(540, 0x0c, (IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ)), }; #ifdef CONFIG_MAC80211_LEDS diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 7e86abb..d3d7c51 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1282,9 +1282,14 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_rate_priv *ath_rc_priv = priv_sta; int i, j = 0; + u32 rate_flags = ieee80211_chandef_rate_flags(&sc->hw->conf.chandef); for (i = 0; i < sband->n_bitrates; i++) { if (sta->supp_rates[sband->band] & BIT(i)) { + if ((rate_flags & sband->bitrates[i].flags) + != rate_flags) + continue; + ath_rc_priv->neg_rates.rs_rates[j] = (sband->bitrates[i].bitrate * 2) / 10; j++; -- cgit v0.10.2 From 6fac8bbcd5cd77ea561409c3c0ae16b4e7b9fc3e Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 14 Aug 2013 08:01:34 +0200 Subject: ath9k: announce that ath9k supports 5/10 MHz Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 6347378..60bb4d6 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -860,6 +860,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ; #ifdef CONFIG_PM_SLEEP if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) && -- cgit v0.10.2 From 312a64435bda34bc7974140f8eb53a252b4ba4ed Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 14 Aug 2013 08:01:35 +0200 Subject: ath5k: report 5/10 MHz channels Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index ce67ab7..260a6fc 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1400,6 +1400,16 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb, rxs->rate_idx = ath5k_hw_to_driver_rix(ah, rs->rs_rate); rxs->flag |= ath5k_rx_decrypted(ah, skb, rs); + switch (ah->ah_bwmode) { + case AR5K_BWMODE_5MHZ: + rxs->flag |= RX_FLAG_5MHZ; + break; + case AR5K_BWMODE_10MHZ: + rxs->flag |= RX_FLAG_10MHZ; + break; + default: + break; + } if (rxs->rate_idx >= 0 && rs->rs_rate == ah->sbands[ah->curchan->band].bitrates[rxs->rate_idx].hw_value_short) -- cgit v0.10.2 From 6a09ae95ed248d6d946407bb1f955e5f2624663d Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 14 Aug 2013 08:01:36 +0200 Subject: ath5k: set 5/10 MHz supported channels and fix duration Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 260a6fc..7c298af 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -165,28 +165,36 @@ static const struct ieee80211_rate ath5k_rates[] = { .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 60, .hw_value = ATH5K_RATE_CODE_6M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 90, .hw_value = ATH5K_RATE_CODE_9M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 120, .hw_value = ATH5K_RATE_CODE_12M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 180, .hw_value = ATH5K_RATE_CODE_18M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 240, .hw_value = ATH5K_RATE_CODE_24M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 360, .hw_value = ATH5K_RATE_CODE_36M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 480, .hw_value = ATH5K_RATE_CODE_48M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 540, .hw_value = ATH5K_RATE_CODE_54M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, }; static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 1f16b42..c60d36a 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -144,11 +144,13 @@ ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band, sifs = AR5K_INIT_SIFS_HALF_RATE; preamble *= 2; sym_time *= 2; + bitrate = DIV_ROUND_UP(bitrate, 2); break; case AR5K_BWMODE_5MHZ: sifs = AR5K_INIT_SIFS_QUARTER_RATE; preamble *= 4; sym_time *= 4; + bitrate = DIV_ROUND_UP(bitrate, 4); break; default: sifs = AR5K_INIT_SIFS_DEFAULT_BG; diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c index 65fe929..0583c69 100644 --- a/drivers/net/wireless/ath/ath5k/qcu.c +++ b/drivers/net/wireless/ath/ath5k/qcu.c @@ -566,9 +566,11 @@ int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time) { struct ieee80211_channel *channel = ah->ah_current_channel; enum ieee80211_band band; + struct ieee80211_supported_band *sband; struct ieee80211_rate *rate; u32 ack_tx_time, eifs, eifs_clock, sifs, sifs_clock; u32 slot_time_clock = ath5k_hw_htoclock(ah, slot_time); + u32 rate_flags, i; if (slot_time < 6 || slot_time_clock > AR5K_SLOT_TIME_MAX) return -EINVAL; @@ -605,7 +607,28 @@ int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time) else band = IEEE80211_BAND_2GHZ; - rate = &ah->sbands[band].bitrates[0]; + switch (ah->ah_bwmode) { + case AR5K_BWMODE_5MHZ: + rate_flags = IEEE80211_RATE_SUPPORTS_5MHZ; + break; + case AR5K_BWMODE_10MHZ: + rate_flags = IEEE80211_RATE_SUPPORTS_10MHZ; + break; + default: + rate_flags = 0; + break; + } + sband = &ah->sbands[band]; + rate = NULL; + for (i = 0; i < sband->n_bitrates; i++) { + if ((rate_flags & sband->bitrates[i].flags) != rate_flags) + continue; + rate = &sband->bitrates[i]; + break; + } + if (WARN_ON(!rate)) + return -EINVAL; + ack_tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, false); /* ack_tx_time includes an SIFS already */ -- cgit v0.10.2 From 4d70f2fbe12118c5526a1d761f8ef562cecbbc2c Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 14 Aug 2013 08:01:37 +0200 Subject: ath5k: enable support for 5 MHz and 10 MHz channels Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 2d691b8..74bd54d 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -29,6 +29,7 @@ #include #include #include +#include /* RX/TX descriptor hw structs * TODO: Driver part should only see sw structs */ diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 7c298af..48161ed 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -56,6 +56,7 @@ #include #include +#include #include #include @@ -443,11 +444,27 @@ ath5k_setup_bands(struct ieee80211_hw *hw) * Called with ah->lock. */ int -ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan) +ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef) { ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "channel set, resetting (%u -> %u MHz)\n", - ah->curchan->center_freq, chan->center_freq); + ah->curchan->center_freq, chandef->chan->center_freq); + + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_20_NOHT: + ah->ah_bwmode = AR5K_BWMODE_DEFAULT; + break; + case NL80211_CHAN_WIDTH_5: + ah->ah_bwmode = AR5K_BWMODE_5MHZ; + break; + case NL80211_CHAN_WIDTH_10: + ah->ah_bwmode = AR5K_BWMODE_10MHZ; + break; + default: + WARN_ON(1); + return -EINVAL; + } /* * To switch channels clear any pending DMA operations; @@ -455,7 +472,7 @@ ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan) * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - return ath5k_reset(ah, chan, true); + return ath5k_reset(ah, chandef->chan, true); } void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) @@ -2525,6 +2542,8 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops) /* SW support for IBSS_RSN is provided by mac80211 */ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ; + /* both antennas can be configured as RX or TX */ hw->wiphy->available_antennas_tx = 0x3; hw->wiphy->available_antennas_rx = 0x3; diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index ca9a83c..97469d0 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -101,7 +101,7 @@ void ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable); void ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah, struct ieee80211_vif *vif); -int ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan); +int ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef); void ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf); void ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf); void ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 40825d4..4ee01f6 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -202,7 +202,7 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&ah->lock); if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - ret = ath5k_chan_set(ah, conf->chandef.chan); + ret = ath5k_chan_set(ah, &conf->chandef); if (ret < 0) goto unlock; } -- cgit v0.10.2 From d074e8d547853cc8b40cf93a460e8fbf9eaa3d00 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 14 Aug 2013 08:01:38 +0200 Subject: ath9k: enable CSA functionality in ath9k CSA is only enabled for one interface, but the same limitation applies for mac80211 too. It checks whether the beacon has been sent (different approaches for non-EDMA-enabled and EDMA-enabled devices), and completes the channel switch after that. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index df1c495..8519e75 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -420,6 +420,7 @@ void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif); void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif); void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif); void ath9k_set_beacon(struct ath_softc *sc); +bool ath9k_csa_is_finished(struct ath_softc *sc); /*******************/ /* Link Monitoring */ @@ -756,6 +757,7 @@ struct ath_softc { #endif struct ath_descdma txsdma; + struct ieee80211_vif *csa_vif; struct ath_ant_comb ant_comb; u8 ant_tx, ant_rx; diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 1a17732..b5c16b3a 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -291,6 +291,23 @@ void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif) (unsigned long long)tsfadjust, avp->av_bslot); } +bool ath9k_csa_is_finished(struct ath_softc *sc) +{ + struct ieee80211_vif *vif; + + vif = sc->csa_vif; + if (!vif || !vif->csa_active) + return false; + + if (!ieee80211_csa_is_complete(vif)) + return false; + + ieee80211_csa_finish(vif); + + sc->csa_vif = NULL; + return true; +} + void ath9k_beacon_tasklet(unsigned long data) { struct ath_softc *sc = (struct ath_softc *)data; @@ -336,6 +353,10 @@ void ath9k_beacon_tasklet(unsigned long data) return; } + /* EDMA devices check that in the tx completion function. */ + if (!edma && ath9k_csa_is_finished(sc)) + return; + slot = ath9k_beacon_choose_slot(sc); vif = sc->beacon.bslot[slot]; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 60bb4d6..abf1eb5 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -861,6 +861,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ; + hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH; #ifdef CONFIG_PM_SLEEP if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) && diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index ba382a8..ac9f18f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1032,6 +1032,9 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, if (ath9k_uses_beacons(vif->type)) ath9k_beacon_remove_slot(sc, vif); + if (sc->csa_vif == vif) + sc->csa_vif = NULL; + ath9k_ps_wakeup(sc); ath9k_calculate_summary_state(hw, NULL); ath9k_ps_restore(sc); @@ -2318,6 +2321,19 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw) clear_bit(SC_OP_SCANNING, &sc->sc_flags); } +static void ath9k_channel_switch_beacon(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_chan_def *chandef) +{ + struct ath_softc *sc = hw->priv; + + /* mac80211 does not support CSA in multi-if cases (yet) */ + if (WARN_ON(sc->csa_vif)) + return; + + sc->csa_vif = vif; +} + struct ieee80211_ops ath9k_ops = { .tx = ath9k_tx, .start = ath9k_start, @@ -2365,4 +2381,5 @@ struct ieee80211_ops ath9k_ops = { #endif .sw_scan_start = ath9k_sw_scan_start, .sw_scan_complete = ath9k_sw_scan_complete, + .channel_switch_beacon = ath9k_channel_switch_beacon, }; diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 7223e30..35b515f 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2559,6 +2559,8 @@ void ath_tx_edma_tasklet(struct ath_softc *sc) if (ts.qid == sc->beacon.beaconq) { sc->beacon.tx_processed = true; sc->beacon.tx_last = !(ts.ts_status & ATH9K_TXERR_MASK); + + ath9k_csa_is_finished(sc); continue; } -- cgit v0.10.2 From ae1b1c5dcdef1ebd4b37a7d56ad767add757a660 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 16 Aug 2013 10:23:29 +0200 Subject: rt2x00: rt2800lib: introduce rt2800_get_txwi_rxwi_size helper The rt2800pci driver uses the same [RT]XWI size for all chipsets, however some chips requires different values. The size of the [RT]XWI structures is a constant value for a given chipset and it does not depend on the underlying interface. Add a helper function which returns the correct values for the actual chipset and use the new helper both in the rt2800usb and in the rt2800pci drivers. This ensures that both drivers are using the correct values. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index dedc3d4..313da6a 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -521,6 +521,29 @@ void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev) } EXPORT_SYMBOL_GPL(rt2800_disable_wpdma); +void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev, + unsigned short *txwi_size, + unsigned short *rxwi_size) +{ + switch (rt2x00dev->chip.rt) { + case RT3593: + *txwi_size = TXWI_DESC_SIZE_4WORDS; + *rxwi_size = RXWI_DESC_SIZE_5WORDS; + break; + + case RT5592: + *txwi_size = TXWI_DESC_SIZE_5WORDS; + *rxwi_size = RXWI_DESC_SIZE_6WORDS; + break; + + default: + *txwi_size = TXWI_DESC_SIZE_4WORDS; + *rxwi_size = RXWI_DESC_SIZE_4WORDS; + break; + } +} +EXPORT_SYMBOL_GPL(rt2800_get_txwi_rxwi_size); + static bool rt2800_check_firmware_crc(const u8 *data, const size_t len) { u16 fw_crc; diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 6ec7394..a94ba44 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -226,4 +226,8 @@ int rt2800_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey); void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev); +void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev, + unsigned short *txwi_size, + unsigned short *rxwi_size); + #endif /* RT2800LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 0005562..dcad90c 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1189,12 +1189,17 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { static void rt2800pci_queue_init(struct data_queue *queue) { + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; + unsigned short txwi_size, rxwi_size; + + rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size); + switch (queue->qid) { case QID_RX: queue->limit = 128; queue->data_size = AGGREGATION_SIZE; queue->desc_size = RXD_DESC_SIZE; - queue->winfo_size = RXWI_DESC_SIZE_4WORDS; + queue->winfo_size = rxwi_size; queue->priv_size = sizeof(struct queue_entry_priv_mmio); break; @@ -1205,7 +1210,7 @@ static void rt2800pci_queue_init(struct data_queue *queue) queue->limit = 64; queue->data_size = AGGREGATION_SIZE; queue->desc_size = TXD_DESC_SIZE; - queue->winfo_size = TXWI_DESC_SIZE_4WORDS; + queue->winfo_size = txwi_size; queue->priv_size = sizeof(struct queue_entry_priv_mmio); break; @@ -1213,7 +1218,7 @@ static void rt2800pci_queue_init(struct data_queue *queue) queue->limit = 8; queue->data_size = 0; /* No DMA required for beacons */ queue->desc_size = TXD_DESC_SIZE; - queue->winfo_size = TXWI_DESC_SIZE_4WORDS; + queue->winfo_size = txwi_size; queue->priv_size = sizeof(struct queue_entry_priv_mmio); break; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index fc9efdf..338034e 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -854,16 +854,7 @@ static void rt2800usb_queue_init(struct data_queue *queue) struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; unsigned short txwi_size, rxwi_size; - if (rt2x00_rt(rt2x00dev, RT3593)) { - txwi_size = TXWI_DESC_SIZE_4WORDS; - rxwi_size = RXWI_DESC_SIZE_5WORDS; - } else if (rt2x00_rt(rt2x00dev, RT5592)) { - txwi_size = TXWI_DESC_SIZE_5WORDS; - rxwi_size = RXWI_DESC_SIZE_6WORDS; - } else { - txwi_size = TXWI_DESC_SIZE_4WORDS; - rxwi_size = RXWI_DESC_SIZE_4WORDS; - } + rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size); switch (queue->qid) { case QID_RX: -- cgit v0.10.2 From 41caa760d6acaf47cbd44c3d78307fb9be089111 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 16 Aug 2013 10:23:30 +0200 Subject: rt2x00: rt2800pci: fix AUX_CTRL register setup for RT3090/3390/3593/5592 The 2011_1007_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO driver enables PCIe wakeup for these chips as well. Do the same in rt2x00. References: rt28xx_init in common/rtmp_init_intf.c RTMPInitPCIeLinkCtrlValue in os/linux/rt_rbus_pci_drv.c Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index dcad90c..f8f2abb 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -507,9 +507,13 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); if (rt2x00_is_pcie(rt2x00dev) && - (rt2x00_rt(rt2x00dev, RT3572) || + (rt2x00_rt(rt2x00dev, RT3090) || + rt2x00_rt(rt2x00dev, RT3390) || + rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT3593) || rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392))) { + rt2x00_rt(rt2x00dev, RT5392) || + rt2x00_rt(rt2x00dev, RT5592))) { rt2x00mmio_register_read(rt2x00dev, AUX_CTRL, ®); rt2x00_set_field32(®, AUX_CTRL_FORCE_PCIE_CLK, 1); rt2x00_set_field32(®, AUX_CTRL_WAKE_PCIE_EN, 1); -- cgit v0.10.2 From 2a3ba63c235fdcd37f6451bdf4a0c7865a3930cf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 20 Aug 2013 11:28:50 +0200 Subject: mac80211: add missing channel context release IBSS needs to release the channel context when leaving but I evidently missed that. Fix it. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index ea7b9c2..5e8bb3b 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1138,6 +1138,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_IBSS); + ieee80211_vif_release_channel(sdata); synchronize_rcu(); kfree(presp); -- cgit v0.10.2 From 2dfca312a91631311c1cf7c090246cc8103de038 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 20 Aug 2013 19:43:54 +0200 Subject: mac80211: add a flag to indicate CCK support for HT clients brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 16f8b20..026a2a0 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -802,7 +802,8 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | - IEEE80211_HW_SUPPORTS_RC_TABLE; + IEEE80211_HW_SUPPORTS_RC_TABLE | + IEEE80211_HW_SUPPORTS_HT_CCK_RATES; if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 4a33c6e..349fa22 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1860,7 +1860,8 @@ void *carl9170_alloc(size_t priv_size) IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SUPPORTS_RC_TABLE | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_HT_CCK_RATES; if (!modparam_noht) { /* diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 1f80ea5..1b41c8e 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -6133,7 +6133,8 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_REPORTS_TX_ACK_STATUS; + IEEE80211_HW_REPORTS_TX_ACK_STATUS | + IEEE80211_HW_SUPPORTS_HT_CCK_RATES; /* * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5b7a3da..551ba6a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1499,6 +1499,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_RC_TABLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, + IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27, }; /** diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index f5aed96..f3bbea1 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -828,6 +828,9 @@ minstrel_ht_update_cck(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, if (sband->band != IEEE80211_BAND_2GHZ) return; + if (!(mp->hw->flags & IEEE80211_HW_SUPPORTS_HT_CCK_RATES)) + return; + mi->cck_supported = 0; mi->cck_supported_short = 0; for (i = 0; i < 4; i++) { -- cgit v0.10.2 From 75a423f493ffdf741acae27bf179cd560f7813d7 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 21 Aug 2013 15:30:25 +0200 Subject: mac80211: ibss: fix ignored channel parameter my earlier patch "mac80211: change IBSS channel state to chandef" created a regression by ignoring the channel parameter in __ieee80211_sta_join_ibss, which breaks IBSS channel selection. This patch fixes this situation by using the right channel and adopting the selected bandwidth mode. Cc: stable@vger.kernel.org Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 5e8bb3b..2d45643 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -36,7 +36,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, const u8 *bssid, const int beacon_int, - struct ieee80211_channel *chan, + struct cfg80211_chan_def *req_chandef, const u32 basic_rates, const u16 capability, u64 tsf, bool creator) @@ -51,6 +51,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, u32 bss_change; u8 supp_rates[IEEE80211_MAX_SUPP_RATES]; struct cfg80211_chan_def chandef; + struct ieee80211_channel *chan; struct beacon_data *presp; int frame_len; @@ -81,7 +82,9 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; - chandef = ifibss->chandef; + /* make a copy of the chandef, it could be modified below. */ + chandef = *req_chandef; + chan = chandef.chan; if (!cfg80211_reg_can_beacon(local->hw.wiphy, &chandef)) { chandef.width = NL80211_CHAN_WIDTH_20; chandef.center_freq1 = chan->center_freq; @@ -259,10 +262,12 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss = container_of((void *)bss, struct cfg80211_bss, priv); struct ieee80211_supported_band *sband; + struct cfg80211_chan_def chandef; u32 basic_rates; int i, j; u16 beacon_int = cbss->beacon_interval; const struct cfg80211_bss_ies *ies; + enum nl80211_channel_type chan_type; u64 tsf; sdata_assert_lock(sdata); @@ -270,6 +275,26 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, if (beacon_int < 10) beacon_int = 10; + switch (sdata->u.ibss.chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + chan_type = cfg80211_get_chandef_type(&sdata->u.ibss.chandef); + cfg80211_chandef_create(&chandef, cbss->channel, chan_type); + break; + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + cfg80211_chandef_create(&chandef, cbss->channel, + NL80211_CHAN_WIDTH_20_NOHT); + chandef.width = sdata->u.ibss.chandef.width; + break; + default: + /* fall back to 20 MHz for unsupported modes */ + cfg80211_chandef_create(&chandef, cbss->channel, + NL80211_CHAN_WIDTH_20_NOHT); + break; + } + sband = sdata->local->hw.wiphy->bands[cbss->channel->band]; basic_rates = 0; @@ -294,7 +319,7 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, __ieee80211_sta_join_ibss(sdata, cbss->bssid, beacon_int, - cbss->channel, + &chandef, basic_rates, cbss->capability, tsf, false); @@ -736,7 +761,7 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) sdata->drop_unencrypted = 0; __ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int, - ifibss->chandef.chan, ifibss->basic_rates, + &ifibss->chandef, ifibss->basic_rates, capability, 0, true); } -- cgit v0.10.2 From ba34dd3df73eaa2aa4fbb82a91aade3f3a910acb Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 2 Aug 2013 14:10:12 +0300 Subject: Bluetooth: use DIV_ROUND_UP in suitable places in btmrvl_sdio There are two places where DIV_ROUND_UP may be used. It makes code a bit clearer. Signed-off-by: Andy Shevchenko Signed-off-by: Gustavo Padovan diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index 75c2626..00da6df 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -486,7 +486,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card) if (firmwarelen - offset < txlen) txlen = firmwarelen - offset; - tx_blocks = (txlen + blksz_dl - 1) / blksz_dl; + tx_blocks = DIV_ROUND_UP(txlen, blksz_dl); memcpy(fwbuf, &firmware[offset], txlen); } @@ -873,7 +873,7 @@ static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv, } blksz = SDIO_BLOCK_SIZE; - buf_block_len = (nb + blksz - 1) / blksz; + buf_block_len = DIV_ROUND_UP(nb, blksz); sdio_claim_host(card->func); -- cgit v0.10.2 From 9d225d2208a6f17da5987ff4e7710b9e805cb5d6 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Thu, 8 Aug 2013 14:53:56 +0300 Subject: Bluetooth: Fix getting SCO socket options in deferred state When a socket is in deferred state there does actually exist an underlying connection even though the connection state is not yet BT_CONNECTED. In the deferred state it should therefore be allowed to get socket options that usually depend on a connection, such as SCO_OPTIONS and SCO_CONNINFO. This patch fixes the behavior of some user space code that behaves as follows without it: $ sudo tools/btiotest -i 00:1B:DC:xx:xx:xx -d -s accept=2 reject=-1 discon=-1 defer=1 sec=0 update_sec=0 prio=0 voice=0x0000 Listening for SCO connections bt_io_get(OPT_DEST): getsockopt(SCO_OPTIONS): Transport endpoint is not connected (107) Accepting connection Successfully connected to 60:D8:19:xx:xx:xx. handle=43, class=000000 The conditions that the patch updates the if-statements to is taken from similar code in l2cap_sock.c which correctly handles the deferred state. Signed-off-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index e7bd4ee..2de7150 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -765,7 +765,9 @@ static int sco_sock_getsockopt_old(struct socket *sock, int optname, char __user switch (optname) { case SCO_OPTIONS: - if (sk->sk_state != BT_CONNECTED) { + if (sk->sk_state != BT_CONNECTED && + !(sk->sk_state == BT_CONNECT2 && + test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags))) { err = -ENOTCONN; break; } @@ -781,7 +783,9 @@ static int sco_sock_getsockopt_old(struct socket *sock, int optname, char __user break; case SCO_CONNINFO: - if (sk->sk_state != BT_CONNECTED) { + if (sk->sk_state != BT_CONNECTED && + !(sk->sk_state == BT_CONNECT2 && + test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags))) { err = -ENOTCONN; break; } -- cgit v0.10.2 From c7882cbd1151011ca8e6fb13530cd09eae1c39ee Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 13 Aug 2013 10:00:54 -0700 Subject: Bluetooth: Set different event mask for LE-only controllers In case of a Low Energy only controller it makes no sense to configure the full BR/EDR event mask. It will just enable events that can not be send anyway and there is no guarantee that such a controller will accept this value. Use event mask 0x90 0xe8 0x04 0x02 0x00 0x80 0x00 0x20 for LE-only controllers which enables the following events: Disconnection Complete Encryption Change Read Remote Version Information Complete Command Complete Command Status Hardware Error Number of Completed Packets Data Buffer Overflow Encryption Key Refresh Complete LE Meta This is according to Core Specification, Part E, Section 3. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index b821b19..8d9b87d 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -454,6 +454,18 @@ static void hci_setup_event_mask(struct hci_request *req) events[4] |= 0x04; /* Read Remote Extended Features Complete */ events[5] |= 0x08; /* Synchronous Connection Complete */ events[5] |= 0x10; /* Synchronous Connection Changed */ + } else { + /* Use a different default for LE-only devices */ + memset(events, 0, sizeof(events)); + events[0] |= 0x10; /* Disconnection Complete */ + events[0] |= 0x80; /* Encryption Change */ + events[1] |= 0x08; /* Read Remote Version Information Complete */ + events[1] |= 0x20; /* Command Complete */ + events[1] |= 0x40; /* Command Status */ + events[1] |= 0x80; /* Hardware Error */ + events[2] |= 0x04; /* Number of Completed Packets */ + events[3] |= 0x02; /* Data Buffer Overflow */ + events[5] |= 0x80; /* Encryption Key Refresh Complete */ } if (lmp_inq_rssi_capable(hdev)) -- cgit v0.10.2 From 396dc223dd36edd218650d042a07c5e61f022c5b Mon Sep 17 00:00:00 2001 From: Gianluca Anzolin Date: Mon, 29 Jul 2013 17:08:08 +0200 Subject: Bluetooth: Take proper tty_struct references In net/bluetooth/rfcomm/tty.c the struct tty_struct is used without taking references. This may lead to a use-after-free of the rfcomm tty. Fix this by taking references properly, using the tty_port_* helpers when possible. The raw assignments of dev->port.tty in rfcomm_tty_open/close are addressed in the later commit 'rfcomm: Implement .activate, .shutdown and .carrier_raised methods'. Signed-off-by: Gianluca Anzolin Reviewed-by: Peter Hurley Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index b6e44ad..cd7ff37 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -333,10 +333,9 @@ static inline unsigned int rfcomm_room(struct rfcomm_dlc *dlc) static void rfcomm_wfree(struct sk_buff *skb) { struct rfcomm_dev *dev = (void *) skb->sk; - struct tty_struct *tty = dev->port.tty; atomic_sub(skb->truesize, &dev->wmem_alloc); - if (test_bit(RFCOMM_TTY_ATTACHED, &dev->flags) && tty) - tty_wakeup(tty); + if (test_bit(RFCOMM_TTY_ATTACHED, &dev->flags)) + tty_port_tty_wakeup(&dev->port); tty_port_put(&dev->port); } @@ -410,6 +409,7 @@ static int rfcomm_release_dev(void __user *arg) { struct rfcomm_dev_req req; struct rfcomm_dev *dev; + struct tty_struct *tty; if (copy_from_user(&req, arg, sizeof(req))) return -EFAULT; @@ -429,8 +429,11 @@ static int rfcomm_release_dev(void __user *arg) rfcomm_dlc_close(dev->dlc, 0); /* Shut down TTY synchronously before freeing rfcomm_dev */ - if (dev->port.tty) - tty_vhangup(dev->port.tty); + tty = tty_port_tty_get(&dev->port); + if (tty) { + tty_vhangup(tty); + tty_kref_put(tty); + } if (!test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) rfcomm_dev_del(dev); @@ -563,6 +566,7 @@ static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb) static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) { struct rfcomm_dev *dev = dlc->owner; + struct tty_struct *tty; if (!dev) return; @@ -572,7 +576,8 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) wake_up_interruptible(&dev->wait); if (dlc->state == BT_CLOSED) { - if (!dev->port.tty) { + tty = tty_port_tty_get(&dev->port); + if (!tty) { if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) { /* Drop DLC lock here to avoid deadlock * 1. rfcomm_dev_get will take rfcomm_dev_lock @@ -591,8 +596,10 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) tty_port_put(&dev->port); rfcomm_dlc_lock(dlc); } - } else - tty_hangup(dev->port.tty); + } else { + tty_hangup(tty); + tty_kref_put(tty); + } } } @@ -604,10 +611,8 @@ static void rfcomm_dev_modem_status(struct rfcomm_dlc *dlc, u8 v24_sig) BT_DBG("dlc %p dev %p v24_sig 0x%02x", dlc, dev, v24_sig); - if ((dev->modem_status & TIOCM_CD) && !(v24_sig & RFCOMM_V24_DV)) { - if (dev->port.tty && !C_CLOCAL(dev->port.tty)) - tty_hangup(dev->port.tty); - } + if ((dev->modem_status & TIOCM_CD) && !(v24_sig & RFCOMM_V24_DV)) + tty_port_tty_hangup(&dev->port, true); dev->modem_status = ((v24_sig & RFCOMM_V24_RTC) ? (TIOCM_DSR | TIOCM_DTR) : 0) | -- cgit v0.10.2 From ebe937f74b8a72cf3ceeae5c2194a160bb092901 Mon Sep 17 00:00:00 2001 From: Gianluca Anzolin Date: Mon, 29 Jul 2013 17:08:09 +0200 Subject: Bluetooth: Remove the device from the list in the destructor The current code removes the device from the device list in several places. Do it only in the destructor instead and in the error path of rfcomm_add_dev() if the device couldn't be initialized. Signed-off-by: Gianluca Anzolin Reviewed-by: Peter Hurley Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index cd7ff37..9c0e142 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -76,13 +76,6 @@ static void rfcomm_dev_modem_status(struct rfcomm_dlc *dlc, u8 v24_sig); /* ---- Device functions ---- */ -/* - * The reason this isn't actually a race, as you no doubt have a little voice - * screaming at you in your head, is that the refcount should never actually - * reach zero unless the device has already been taken off the list, in - * rfcomm_dev_del(). And if that's not true, we'll hit the BUG() in - * rfcomm_dev_destruct() anyway. - */ static void rfcomm_dev_destruct(struct tty_port *port) { struct rfcomm_dev *dev = container_of(port, struct rfcomm_dev, port); @@ -90,10 +83,9 @@ static void rfcomm_dev_destruct(struct tty_port *port) BT_DBG("dev %p dlc %p", dev, dlc); - /* Refcount should only hit zero when called from rfcomm_dev_del() - which will have taken us off the list. Everything else are - refcounting bugs. */ - BUG_ON(!list_empty(&dev->list)); + spin_lock(&rfcomm_dev_lock); + list_del(&dev->list); + spin_unlock(&rfcomm_dev_lock); rfcomm_dlc_lock(dlc); /* Detach DLC if it's owned by this dev */ @@ -282,7 +274,9 @@ out: dev->id, NULL); if (IS_ERR(dev->tty_dev)) { err = PTR_ERR(dev->tty_dev); + spin_lock(&rfcomm_dev_lock); list_del(&dev->list); + spin_unlock(&rfcomm_dev_lock); goto free; } @@ -315,10 +309,6 @@ static void rfcomm_dev_del(struct rfcomm_dev *dev) } spin_unlock_irqrestore(&dev->port.lock, flags); - spin_lock(&rfcomm_dev_lock); - list_del_init(&dev->list); - spin_unlock(&rfcomm_dev_lock); - tty_port_put(&dev->port); } @@ -750,13 +740,8 @@ static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp) dev->port.tty = NULL; rfcomm_dlc_unlock(dev->dlc); - if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags)) { - spin_lock(&rfcomm_dev_lock); - list_del_init(&dev->list); - spin_unlock(&rfcomm_dev_lock); - + if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags)) tty_port_put(&dev->port); - } } else spin_unlock_irqrestore(&dev->port.lock, flags); -- cgit v0.10.2 From 54b926a1434e817ca84cb090f36b56763e192470 Mon Sep 17 00:00:00 2001 From: Gianluca Anzolin Date: Mon, 29 Jul 2013 17:08:10 +0200 Subject: Bluetooth: Move the tty initialization and cleanup out of open/close Move the tty_struct initialization from rfcomm_tty_open() to rfcomm_tty_install() and do the same for the cleanup moving the code from rfcomm_tty_close() to rfcomm_tty_cleanup(). Add also extra error handling in rfcomm_tty_install() because, unlike .open()/.close(), .cleanup() is not called if .install() fails. Signed-off-by: Gianluca Anzolin Reviewed-by: Peter Hurley Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 9c0e142..73dd615 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -633,49 +633,61 @@ static void rfcomm_tty_copy_pending(struct rfcomm_dev *dev) tty_flip_buffer_push(&dev->port); } -static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp) +/* do the reverse of install, clearing the tty fields and releasing the + * reference to tty_port + */ +static void rfcomm_tty_cleanup(struct tty_struct *tty) +{ + struct rfcomm_dev *dev = tty->driver_data; + + if (dev->tty_dev->parent) + device_move(dev->tty_dev, NULL, DPM_ORDER_DEV_LAST); + + /* Close DLC and dettach TTY */ + rfcomm_dlc_close(dev->dlc, 0); + + clear_bit(RFCOMM_TTY_ATTACHED, &dev->flags); + + rfcomm_dlc_lock(dev->dlc); + tty->driver_data = NULL; + dev->port.tty = NULL; + rfcomm_dlc_unlock(dev->dlc); + + tty_port_put(&dev->port); +} + +/* we acquire the tty_port reference since it's here the tty is first used + * by setting the termios. We also populate the driver_data field and install + * the tty port + */ +static int rfcomm_tty_install(struct tty_driver *driver, struct tty_struct *tty) { DECLARE_WAITQUEUE(wait, current); struct rfcomm_dev *dev; struct rfcomm_dlc *dlc; - unsigned long flags; - int err, id; - - id = tty->index; + int err; - BT_DBG("tty %p id %d", tty, id); - - /* We don't leak this refcount. For reasons which are not entirely - clear, the TTY layer will call our ->close() method even if the - open fails. We decrease the refcount there, and decreasing it - here too would cause breakage. */ - dev = rfcomm_dev_get(id); + dev = rfcomm_dev_get(tty->index); if (!dev) return -ENODEV; - BT_DBG("dev %p dst %pMR channel %d opened %d", dev, &dev->dst, - dev->channel, dev->port.count); - - spin_lock_irqsave(&dev->port.lock, flags); - if (++dev->port.count > 1) { - spin_unlock_irqrestore(&dev->port.lock, flags); - return 0; - } - spin_unlock_irqrestore(&dev->port.lock, flags); - dlc = dev->dlc; /* Attach TTY and open DLC */ - rfcomm_dlc_lock(dlc); tty->driver_data = dev; dev->port.tty = tty; rfcomm_dlc_unlock(dlc); set_bit(RFCOMM_TTY_ATTACHED, &dev->flags); + /* install the tty_port */ + err = tty_port_install(&dev->port, driver, tty); + if (err < 0) + goto error_no_dlc; + err = rfcomm_dlc_open(dlc, &dev->src, &dev->dst, dev->channel); if (err < 0) - return err; + goto error_no_dlc; /* Wait for DLC to connect */ add_wait_queue(&dev->wait, &wait); @@ -702,15 +714,45 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp) set_current_state(TASK_RUNNING); remove_wait_queue(&dev->wait, &wait); - if (err == 0) - device_move(dev->tty_dev, rfcomm_get_device(dev), - DPM_ORDER_DEV_AFTER_PARENT); + if (err < 0) + goto error_no_connection; + + device_move(dev->tty_dev, rfcomm_get_device(dev), + DPM_ORDER_DEV_AFTER_PARENT); + return 0; + +error_no_connection: + rfcomm_dlc_close(dlc, err); +error_no_dlc: + clear_bit(RFCOMM_TTY_ATTACHED, &dev->flags); + tty_port_put(&dev->port); + return err; +} + +static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp) +{ + struct rfcomm_dev *dev = tty->driver_data; + unsigned long flags; + + BT_DBG("tty %p id %d", tty, tty->index); + BT_DBG("dev %p dst %pMR channel %d opened %d", dev, &dev->dst, + dev->channel, dev->port.count); + + spin_lock_irqsave(&dev->port.lock, flags); + dev->port.count++; + spin_unlock_irqrestore(&dev->port.lock, flags); + + /* + * FIXME: rfcomm should use proper flow control for + * received data. This hack will be unnecessary and can + * be removed when that's implemented + */ rfcomm_tty_copy_pending(dev); rfcomm_dlc_unthrottle(dev->dlc); - return err; + return 0; } static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp) @@ -727,25 +769,11 @@ static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp) spin_lock_irqsave(&dev->port.lock, flags); if (!--dev->port.count) { spin_unlock_irqrestore(&dev->port.lock, flags); - if (dev->tty_dev->parent) - device_move(dev->tty_dev, NULL, DPM_ORDER_DEV_LAST); - - /* Close DLC and dettach TTY */ - rfcomm_dlc_close(dev->dlc, 0); - - clear_bit(RFCOMM_TTY_ATTACHED, &dev->flags); - - rfcomm_dlc_lock(dev->dlc); - tty->driver_data = NULL; - dev->port.tty = NULL; - rfcomm_dlc_unlock(dev->dlc); if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags)) tty_port_put(&dev->port); } else spin_unlock_irqrestore(&dev->port.lock, flags); - - tty_port_put(&dev->port); } static int rfcomm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -1118,6 +1146,8 @@ static const struct tty_operations rfcomm_ops = { .wait_until_sent = rfcomm_tty_wait_until_sent, .tiocmget = rfcomm_tty_tiocmget, .tiocmset = rfcomm_tty_tiocmset, + .install = rfcomm_tty_install, + .cleanup = rfcomm_tty_cleanup, }; int __init rfcomm_init_ttys(void) -- cgit v0.10.2 From cad348a17e170451ea8688b532a6ca3e98c63b60 Mon Sep 17 00:00:00 2001 From: Gianluca Anzolin Date: Mon, 29 Jul 2013 17:08:11 +0200 Subject: Bluetooth: Implement .activate, .shutdown and .carrier_raised methods Implement .activate, .shutdown and .carrier_raised methods of tty_port to manage the dlc, moving the code from rfcomm_tty_install() and rfcomm_tty_cleanup() functions. At the same time the tty .open()/.close() and .hangup() methods are changed to use the tty_port helpers that properly call the aforementioned tty_port methods. Signed-off-by: Gianluca Anzolin Reviewed-by: Peter Hurley Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 73dd615..583f713 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -58,7 +58,6 @@ struct rfcomm_dev { uint modem_status; struct rfcomm_dlc *dlc; - wait_queue_head_t wait; struct device *tty_dev; @@ -104,8 +103,39 @@ static void rfcomm_dev_destruct(struct tty_port *port) module_put(THIS_MODULE); } +/* device-specific initialization: open the dlc */ +static int rfcomm_dev_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct rfcomm_dev *dev = container_of(port, struct rfcomm_dev, port); + + return rfcomm_dlc_open(dev->dlc, &dev->src, &dev->dst, dev->channel); +} + +/* we block the open until the dlc->state becomes BT_CONNECTED */ +static int rfcomm_dev_carrier_raised(struct tty_port *port) +{ + struct rfcomm_dev *dev = container_of(port, struct rfcomm_dev, port); + + return (dev->dlc->state == BT_CONNECTED); +} + +/* device-specific cleanup: close the dlc */ +static void rfcomm_dev_shutdown(struct tty_port *port) +{ + struct rfcomm_dev *dev = container_of(port, struct rfcomm_dev, port); + + if (dev->tty_dev->parent) + device_move(dev->tty_dev, NULL, DPM_ORDER_DEV_LAST); + + /* close the dlc */ + rfcomm_dlc_close(dev->dlc, 0); +} + static const struct tty_port_operations rfcomm_port_ops = { .destruct = rfcomm_dev_destruct, + .activate = rfcomm_dev_activate, + .shutdown = rfcomm_dev_shutdown, + .carrier_raised = rfcomm_dev_carrier_raised, }; static struct rfcomm_dev *__rfcomm_dev_get(int id) @@ -228,7 +258,6 @@ static int rfcomm_dev_add(struct rfcomm_dev_req *req, struct rfcomm_dlc *dlc) tty_port_init(&dev->port); dev->port.ops = &rfcomm_port_ops; - init_waitqueue_head(&dev->wait); skb_queue_head_init(&dev->pending); @@ -563,9 +592,12 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) BT_DBG("dlc %p dev %p err %d", dlc, dev, err); dev->err = err; - wake_up_interruptible(&dev->wait); + if (dlc->state == BT_CONNECTED) { + device_move(dev->tty_dev, rfcomm_get_device(dev), + DPM_ORDER_DEV_AFTER_PARENT); - if (dlc->state == BT_CLOSED) { + wake_up_interruptible(&dev->port.open_wait); + } else if (dlc->state == BT_CLOSED) { tty = tty_port_tty_get(&dev->port); if (!tty) { if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) { @@ -640,17 +672,10 @@ static void rfcomm_tty_cleanup(struct tty_struct *tty) { struct rfcomm_dev *dev = tty->driver_data; - if (dev->tty_dev->parent) - device_move(dev->tty_dev, NULL, DPM_ORDER_DEV_LAST); - - /* Close DLC and dettach TTY */ - rfcomm_dlc_close(dev->dlc, 0); - clear_bit(RFCOMM_TTY_ATTACHED, &dev->flags); rfcomm_dlc_lock(dev->dlc); tty->driver_data = NULL; - dev->port.tty = NULL; rfcomm_dlc_unlock(dev->dlc); tty_port_put(&dev->port); @@ -662,7 +687,6 @@ static void rfcomm_tty_cleanup(struct tty_struct *tty) */ static int rfcomm_tty_install(struct tty_driver *driver, struct tty_struct *tty) { - DECLARE_WAITQUEUE(wait, current); struct rfcomm_dev *dev; struct rfcomm_dlc *dlc; int err; @@ -676,72 +700,30 @@ static int rfcomm_tty_install(struct tty_driver *driver, struct tty_struct *tty) /* Attach TTY and open DLC */ rfcomm_dlc_lock(dlc); tty->driver_data = dev; - dev->port.tty = tty; rfcomm_dlc_unlock(dlc); set_bit(RFCOMM_TTY_ATTACHED, &dev->flags); /* install the tty_port */ err = tty_port_install(&dev->port, driver, tty); - if (err < 0) - goto error_no_dlc; - - err = rfcomm_dlc_open(dlc, &dev->src, &dev->dst, dev->channel); - if (err < 0) - goto error_no_dlc; + if (err) + rfcomm_tty_cleanup(tty); - /* Wait for DLC to connect */ - add_wait_queue(&dev->wait, &wait); - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - - if (dlc->state == BT_CLOSED) { - err = -dev->err; - break; - } - - if (dlc->state == BT_CONNECTED) - break; - - if (signal_pending(current)) { - err = -EINTR; - break; - } - - tty_unlock(tty); - schedule(); - tty_lock(tty); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&dev->wait, &wait); - - if (err < 0) - goto error_no_connection; - - device_move(dev->tty_dev, rfcomm_get_device(dev), - DPM_ORDER_DEV_AFTER_PARENT); - return 0; - -error_no_connection: - rfcomm_dlc_close(dlc, err); -error_no_dlc: - clear_bit(RFCOMM_TTY_ATTACHED, &dev->flags); - tty_port_put(&dev->port); return err; } static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp) { struct rfcomm_dev *dev = tty->driver_data; - unsigned long flags; + int err; BT_DBG("tty %p id %d", tty, tty->index); BT_DBG("dev %p dst %pMR channel %d opened %d", dev, &dev->dst, dev->channel, dev->port.count); - spin_lock_irqsave(&dev->port.lock, flags); - dev->port.count++; - spin_unlock_irqrestore(&dev->port.lock, flags); + err = tty_port_open(&dev->port, tty, filp); + if (err) + return err; /* * FIXME: rfcomm should use proper flow control for @@ -758,7 +740,6 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp) static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp) { struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; - unsigned long flags; if (!dev) return; @@ -766,14 +747,10 @@ static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp) BT_DBG("tty %p dev %p dlc %p opened %d", tty, dev, dev->dlc, dev->port.count); - spin_lock_irqsave(&dev->port.lock, flags); - if (!--dev->port.count) { - spin_unlock_irqrestore(&dev->port.lock, flags); + tty_port_close(&dev->port, tty, filp); - if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags)) - tty_port_put(&dev->port); - } else - spin_unlock_irqrestore(&dev->port.lock, flags); + if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags)) + tty_port_put(&dev->port); } static int rfcomm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -1076,7 +1053,7 @@ static void rfcomm_tty_hangup(struct tty_struct *tty) if (!dev) return; - rfcomm_tty_flush_buffer(tty); + tty_port_hangup(&dev->port); if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) { if (rfcomm_dev_get(dev->id) == NULL) @@ -1166,7 +1143,7 @@ int __init rfcomm_init_ttys(void) rfcomm_tty_driver->subtype = SERIAL_TYPE_NORMAL; rfcomm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; rfcomm_tty_driver->init_termios = tty_std_termios; - rfcomm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + rfcomm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL; rfcomm_tty_driver->init_termios.c_lflag &= ~ICANON; tty_set_operations(rfcomm_tty_driver, &rfcomm_ops); -- cgit v0.10.2 From ece3150dea382c7c961fe2604332ed3474960d25 Mon Sep 17 00:00:00 2001 From: Gianluca Anzolin Date: Mon, 29 Jul 2013 17:08:12 +0200 Subject: Bluetooth: Fix the reference counting of tty_port The tty_port can be released in two cases: when we get a HUP in the functions rfcomm_tty_hangup() and rfcomm_dev_state_change(). Or when the user releases the device in rfcomm_release_dev(). In these cases we set the flag RFCOMM_TTY_RELEASED so that no other function can get a reference to the tty_port. The use of !test_and_set_bit(RFCOMM_TTY_RELEASED) ensures that the 'initial' tty_port reference is only dropped once. The rfcomm_dev_del function is removed becase it isn't used anymore. Signed-off-by: Gianluca Anzolin Reviewed-by: Peter Hurley Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 583f713..3e078b7 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -324,23 +324,6 @@ free: return err; } -static void rfcomm_dev_del(struct rfcomm_dev *dev) -{ - unsigned long flags; - BT_DBG("dev %p", dev); - - BUG_ON(test_and_set_bit(RFCOMM_TTY_RELEASED, &dev->flags)); - - spin_lock_irqsave(&dev->port.lock, flags); - if (dev->port.count > 0) { - spin_unlock_irqrestore(&dev->port.lock, flags); - return; - } - spin_unlock_irqrestore(&dev->port.lock, flags); - - tty_port_put(&dev->port); -} - /* ---- Send buffer ---- */ static inline unsigned int rfcomm_room(struct rfcomm_dlc *dlc) { @@ -454,8 +437,9 @@ static int rfcomm_release_dev(void __user *arg) tty_kref_put(tty); } - if (!test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) - rfcomm_dev_del(dev); + if (!test_and_set_bit(RFCOMM_TTY_RELEASED, &dev->flags)) + tty_port_put(&dev->port); + tty_port_put(&dev->port); return 0; } @@ -607,6 +591,9 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) * rfcomm_dev_lock -> dlc lock * 2. tty_port_put will deadlock if it's * the last reference + * + * FIXME: when we release the lock anything + * could happen to dev, even its destruction */ rfcomm_dlc_unlock(dlc); if (rfcomm_dev_get(dev->id) == NULL) { @@ -614,7 +601,10 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) return; } - rfcomm_dev_del(dev); + if (!test_and_set_bit(RFCOMM_TTY_RELEASED, + &dev->flags)) + tty_port_put(&dev->port); + tty_port_put(&dev->port); rfcomm_dlc_lock(dlc); } @@ -741,16 +731,10 @@ static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp) { struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; - if (!dev) - return; - BT_DBG("tty %p dev %p dlc %p opened %d", tty, dev, dev->dlc, dev->port.count); tty_port_close(&dev->port, tty, filp); - - if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags)) - tty_port_put(&dev->port); } static int rfcomm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -1050,17 +1034,11 @@ static void rfcomm_tty_hangup(struct tty_struct *tty) BT_DBG("tty %p dev %p", tty, dev); - if (!dev) - return; - tty_port_hangup(&dev->port); - if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) { - if (rfcomm_dev_get(dev->id) == NULL) - return; - rfcomm_dev_del(dev); + if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags) && + !test_and_set_bit(RFCOMM_TTY_RELEASED, &dev->flags)) tty_port_put(&dev->port); - } } static int rfcomm_tty_tiocmget(struct tty_struct *tty) -- cgit v0.10.2 From ffe6b68cc5999a3f91a15b6667e69e14186e337d Mon Sep 17 00:00:00 2001 From: Gianluca Anzolin Date: Mon, 29 Jul 2013 17:08:13 +0200 Subject: Bluetooth: Purge the dlc->tx_queue to avoid circular dependency In rfcomm_tty_cleanup we purge the dlc->tx_queue which may contain socket buffers referencing the tty_port and thus preventing the tty_port destruction. Signed-off-by: Gianluca Anzolin Reviewed-by: Peter Hurley Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 3e078b7..6d126fa 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -668,6 +668,12 @@ static void rfcomm_tty_cleanup(struct tty_struct *tty) tty->driver_data = NULL; rfcomm_dlc_unlock(dev->dlc); + /* + * purge the dlc->tx_queue to avoid circular dependencies + * between dev and dlc + */ + skb_queue_purge(&dev->dlc->tx_queue); + tty_port_put(&dev->port); } -- cgit v0.10.2 From e660ed6c70370dae0887e2b5224d8b6c1e138120 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:23:54 +0200 Subject: Bluetooth: Use hci_connect_sco directly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit hci_connect is a super function for connecting hci protocols. But the voice_setting parameter (introduced in subsequent patches) is only needed by SCO and security requirements are not needed for SCO channels. Thus, it makes sense to have a separate function for SCO. Signed-off-by: Frédéric Dalleau Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index f77885e..307a192 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -584,6 +584,8 @@ struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle); struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 dst_type, __u8 sec_level, __u8 auth_type); +struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, + bdaddr_t *dst); int hci_conn_check_link_mode(struct hci_conn *conn); int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level); int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type); diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 6c7f363..5f1f448 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -560,13 +560,12 @@ static struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst, return acl; } -static struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, - bdaddr_t *dst, u8 sec_level, u8 auth_type) +struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst) { struct hci_conn *acl; struct hci_conn *sco; - acl = hci_connect_acl(hdev, dst, sec_level, auth_type); + acl = hci_connect_acl(hdev, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING); if (IS_ERR(acl)) return acl; @@ -612,9 +611,6 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, return hci_connect_le(hdev, dst, dst_type, sec_level, auth_type); case ACL_LINK: return hci_connect_acl(hdev, dst, sec_level, auth_type); - case SCO_LINK: - case ESCO_LINK: - return hci_connect_sco(hdev, type, dst, sec_level, auth_type); } return ERR_PTR(-EINVAL); diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 2de7150..ab2502c 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -176,8 +176,7 @@ static int sco_connect(struct sock *sk) else type = SCO_LINK; - hcon = hci_connect(hdev, type, dst, BDADDR_BREDR, BT_SECURITY_LOW, - HCI_AT_NO_BONDING); + hcon = hci_connect_sco(hdev, type, dst); if (IS_ERR(hcon)) { err = PTR_ERR(hcon); goto done; -- cgit v0.10.2 From 33f2404823f000f9b5fc570b0a08b1008e241578 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:23:55 +0200 Subject: Bluetooth: Remove unused mask parameter in sco_conn_defer_accept MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From Bluetooth Core v4.0 specification, 7.1.8 Accept Connection Request Command "When accepting synchronous connection request, the Role parameter is not used and will be ignored by the BR/EDR Controller." Signed-off-by: Frédéric Dalleau Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index ab2502c..acdca68 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -651,7 +651,7 @@ static int sco_sock_sendmsg(struct kiocb *iocb, struct socket *sock, return err; } -static void sco_conn_defer_accept(struct hci_conn *conn, int mask) +static void sco_conn_defer_accept(struct hci_conn *conn) { struct hci_dev *hdev = conn->hdev; @@ -663,11 +663,7 @@ static void sco_conn_defer_accept(struct hci_conn *conn, int mask) struct hci_cp_accept_conn_req cp; bacpy(&cp.bdaddr, &conn->dst); - - if (lmp_rswitch_capable(hdev) && (mask & HCI_LM_MASTER)) - cp.role = 0x00; /* Become master */ - else - cp.role = 0x01; /* Remain slave */ + cp.role = 0x00; /* Ignored */ hci_send_cmd(hdev, HCI_OP_ACCEPT_CONN_REQ, sizeof(cp), &cp); } else { @@ -697,7 +693,7 @@ static int sco_sock_recvmsg(struct kiocb *iocb, struct socket *sock, if (sk->sk_state == BT_CONNECT2 && test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { - sco_conn_defer_accept(pi->conn->hcon, 0); + sco_conn_defer_accept(pi->conn->hcon); sk->sk_state = BT_CONFIG; msg->msg_namelen = 0; -- cgit v0.10.2 From ad10b1a48754b1381582d96f070a39832e41382d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:23:56 +0200 Subject: Bluetooth: Add Bluetooth socket voice option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch extends the current Bluetooth socket options with BT_VOICE. This is intended to choose voice data type at runtime. It only applies to SCO sockets. Incoming connections shall be setup during deferred setup. Outgoing connections shall be setup before connect(). The desired setting is stored in the SCO socket info. This patch declares needed members, modifies getsockopt() and setsockopt(). Signed-off-by: Frédéric Dalleau Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 10eb9b3..10d43d8 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -107,6 +107,14 @@ struct bt_power { */ #define BT_CHANNEL_POLICY_AMP_PREFERRED 2 +#define BT_VOICE 11 +struct bt_voice { + __u16 setting; +}; + +#define BT_VOICE_TRANSPARENT 0x0003 +#define BT_VOICE_CVSD_16BIT 0x0060 + __printf(1, 2) int bt_info(const char *fmt, ...); __printf(1, 2) diff --git a/include/net/bluetooth/sco.h b/include/net/bluetooth/sco.h index 1e35c43..e252a31 100644 --- a/include/net/bluetooth/sco.h +++ b/include/net/bluetooth/sco.h @@ -73,6 +73,7 @@ struct sco_conn { struct sco_pinfo { struct bt_sock bt; __u32 flags; + __u16 setting; struct sco_conn *conn; }; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index acdca68..678747e 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -416,6 +416,8 @@ static struct sock *sco_sock_alloc(struct net *net, struct socket *sock, int pro sk->sk_protocol = proto; sk->sk_state = BT_OPEN; + sco_pi(sk)->setting = BT_VOICE_CVSD_16BIT; + setup_timer(&sk->sk_timer, sco_sock_timeout, (unsigned long)sk); bt_sock_link(&sco_sk_list, sk); @@ -709,7 +711,8 @@ static int sco_sock_recvmsg(struct kiocb *iocb, struct socket *sock, static int sco_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen) { struct sock *sk = sock->sk; - int err = 0; + int len, err = 0; + struct bt_voice voice; u32 opt; BT_DBG("sk %p", sk); @@ -735,6 +738,31 @@ static int sco_sock_setsockopt(struct socket *sock, int level, int optname, char clear_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags); break; + case BT_VOICE: + if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND && + sk->sk_state != BT_CONNECT2) { + err = -EINVAL; + break; + } + + voice.setting = sco_pi(sk)->setting; + + len = min_t(unsigned int, sizeof(voice), optlen); + if (copy_from_user((char *) &voice, optval, len)) { + err = -EFAULT; + break; + } + + /* Explicitly check for these values */ + if (voice.setting != BT_VOICE_TRANSPARENT && + voice.setting != BT_VOICE_CVSD_16BIT) { + err = -EINVAL; + break; + } + + sco_pi(sk)->setting = voice.setting; + break; + default: err = -ENOPROTOOPT; break; @@ -808,6 +836,7 @@ static int sco_sock_getsockopt(struct socket *sock, int level, int optname, char { struct sock *sk = sock->sk; int len, err = 0; + struct bt_voice voice; BT_DBG("sk %p", sk); @@ -833,6 +862,15 @@ static int sco_sock_getsockopt(struct socket *sock, int level, int optname, char break; + case BT_VOICE: + voice.setting = sco_pi(sk)->setting; + + len = min_t(unsigned int, len, sizeof(voice)); + if (copy_to_user(optval, (char *)&voice, len)) + err = -EFAULT; + + break; + default: err = -ENOPROTOOPT; break; -- cgit v0.10.2 From 5d4d62f6ca04c54ed6c84df6adf5427c52feda3e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:23:57 +0200 Subject: Bluetooth: Add constants for SCO airmode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch defines constants for SCO airmode from SCO voice setting. It refers to Bluetooth Core V4.0 specification, Part E, Chap 6.12 which describe SCO voice setting format. Signed-off-by: Frédéric Dalleau Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 307a192..f403509 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1215,4 +1215,8 @@ void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8], u8 bdaddr_to_le(u8 bdaddr_type); +#define SCO_AIRMODE_MASK 0x0003 +#define SCO_AIRMODE_CVSD 0x0000 +#define SCO_AIRMODE_TRANSP 0x0003 + #endif /* __HCI_CORE_H */ -- cgit v0.10.2 From 2f69a82acf6f971a9e184dd32b24c79a14388a6c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:23:58 +0200 Subject: Bluetooth: Use voice setting in deferred SCO connection request MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When an incoming eSCO connection is requested, check the selected voice setting and reply appropriately. Voice setting should have been negotiated previously. For example, in case of HFP, the codec is negotiated using AT commands on the RFCOMM channel. This patch only changes replies for socket with deferred setup enabled. Signed-off-by: Frédéric Dalleau Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 678747e..b1016c8 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -653,7 +653,7 @@ static int sco_sock_sendmsg(struct kiocb *iocb, struct socket *sock, return err; } -static void sco_conn_defer_accept(struct hci_conn *conn) +static void sco_conn_defer_accept(struct hci_conn *conn, u16 setting) { struct hci_dev *hdev = conn->hdev; @@ -676,9 +676,21 @@ static void sco_conn_defer_accept(struct hci_conn *conn) cp.tx_bandwidth = __constant_cpu_to_le32(0x00001f40); cp.rx_bandwidth = __constant_cpu_to_le32(0x00001f40); - cp.max_latency = __constant_cpu_to_le16(0xffff); - cp.content_format = cpu_to_le16(hdev->voice_setting); - cp.retrans_effort = 0xff; + cp.content_format = cpu_to_le16(setting); + + switch (setting & SCO_AIRMODE_MASK) { + case SCO_AIRMODE_TRANSP: + if (conn->pkt_type & ESCO_2EV3) + cp.max_latency = __constant_cpu_to_le16(0x0008); + else + cp.max_latency = __constant_cpu_to_le16(0x000D); + cp.retrans_effort = 0x02; + break; + case SCO_AIRMODE_CVSD: + cp.max_latency = __constant_cpu_to_le16(0xffff); + cp.retrans_effort = 0xff; + break; + } hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ, sizeof(cp), &cp); @@ -695,7 +707,7 @@ static int sco_sock_recvmsg(struct kiocb *iocb, struct socket *sock, if (sk->sk_state == BT_CONNECT2 && test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { - sco_conn_defer_accept(pi->conn->hcon); + sco_conn_defer_accept(pi->conn->hcon, pi->setting); sk->sk_state = BT_CONFIG; msg->msg_namelen = 0; -- cgit v0.10.2 From 10c62ddc6f032c3a096401ca3ce7e5b2d5780859 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:23:59 +0200 Subject: Bluetooth: Parameters for outgoing SCO connections MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to establish a transparent SCO connection, the correct settings must be specified in the Setup Synchronous Connection request. For that, a setting field is added to ACL connection data to set up the desired parameters. The patch also removes usage of hdev->voice_setting in CVSD connection and makes use of T2 parameters for transparent data. Signed-off-by: Frédéric Dalleau Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index f403509..61ca2ce 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -320,6 +320,7 @@ struct hci_conn { __u32 passkey_notify; __u8 passkey_entered; __u16 disc_timeout; + __u16 setting; unsigned long flags; __u8 remote_cap; @@ -584,8 +585,8 @@ struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle); struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 dst_type, __u8 sec_level, __u8 auth_type); -struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, - bdaddr_t *dst); +struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst, + __u16 setting); int hci_conn_check_link_mode(struct hci_conn *conn); int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level); int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type); diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 5f1f448..c0e56a5 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -185,13 +185,24 @@ void hci_setup_sync(struct hci_conn *conn, __u16 handle) conn->attempt++; cp.handle = cpu_to_le16(handle); - cp.pkt_type = cpu_to_le16(conn->pkt_type); cp.tx_bandwidth = __constant_cpu_to_le32(0x00001f40); cp.rx_bandwidth = __constant_cpu_to_le32(0x00001f40); - cp.max_latency = __constant_cpu_to_le16(0xffff); - cp.voice_setting = cpu_to_le16(hdev->voice_setting); - cp.retrans_effort = 0xff; + cp.voice_setting = cpu_to_le16(conn->setting); + + switch (conn->setting & SCO_AIRMODE_MASK) { + case SCO_AIRMODE_TRANSP: + cp.pkt_type = __constant_cpu_to_le16(EDR_ESCO_MASK & + ~ESCO_2EV3); + cp.max_latency = __constant_cpu_to_le16(0x000d); + cp.retrans_effort = 0x02; + break; + case SCO_AIRMODE_CVSD: + cp.pkt_type = cpu_to_le16(conn->pkt_type); + cp.max_latency = __constant_cpu_to_le16(0xffff); + cp.retrans_effort = 0xff; + break; + } hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp); } @@ -560,7 +571,8 @@ static struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst, return acl; } -struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst) +struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst, + __u16 setting) { struct hci_conn *acl; struct hci_conn *sco; @@ -583,6 +595,8 @@ struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst) hci_conn_hold(sco); + sco->setting = setting; + if (acl->state == BT_CONNECTED && (sco->state == BT_OPEN || sco->state == BT_CLOSED)) { set_bit(HCI_CONN_POWER_SAVE, &acl->flags); diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index b1016c8..ed581b4 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -176,7 +176,7 @@ static int sco_connect(struct sock *sk) else type = SCO_LINK; - hcon = hci_connect_sco(hdev, type, dst); + hcon = hci_connect_sco(hdev, type, dst, sco_pi(sk)->setting); if (IS_ERR(hcon)) { err = PTR_ERR(hcon); goto done; -- cgit v0.10.2 From 07a5c61eda7f23883273f738edbf6caaebb71923 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:24:00 +0200 Subject: Bluetooth: Add constants and macro declaration for transparent data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch defines constants and macro for transparent data LMP features. It refers to Bluetooth Core V4.0 specification, Part C, Chap 3.3 which defines LMP feature mask. Signed-off-by: Frédéric Dalleau Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index a01fbb4..aaeaf09 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -238,6 +238,7 @@ enum { #define LMP_CVSD 0x01 #define LMP_PSCHEME 0x02 #define LMP_PCONTROL 0x04 +#define LMP_TRANSPARENT 0x08 #define LMP_RSSI_INQ 0x40 #define LMP_ESCO 0x80 diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 61ca2ce..b2bfab8 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -800,6 +800,7 @@ void hci_conn_del_sysfs(struct hci_conn *conn); #define lmp_lsto_capable(dev) ((dev)->features[0][7] & LMP_LSTO) #define lmp_inq_tx_pwr_capable(dev) ((dev)->features[0][7] & LMP_INQ_TX_PWR) #define lmp_ext_feat_capable(dev) ((dev)->features[0][7] & LMP_EXTFEATURES) +#define lmp_transp_capable(dev) ((dev)->features[0][2] & LMP_TRANSPARENT) /* ----- Extended LMP capabilities ----- */ #define lmp_host_ssp_capable(dev) ((dev)->features[1][0] & LMP_HOST_SSP) -- cgit v0.10.2 From 79dc0087c33f06a8c35d8c9e37ea6307b790bc4c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:24:01 +0200 Subject: Bluetooth: Prevent transparent SCO on older devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Older Bluetooth devices may not support Setup Synchronous Connection or SCO transparent data. This is indicated by the corresponding LMP feature bits. It is not possible to know if the adapter support these features before setting BT_VOICE option since the socket is not bound to an adapter. An adapter can also be added after the socket is created. The socket can be bound to an address before adapter is plugged in. Thus, on a such adapters, if user request BT_VOICE_TRANSPARENT, outgoing connections fail on connect() and returns -EOPNOTSUPP. Incoming connections do not fail. However, they should only be allowed depending on what was specified in Write_Voice_Settings command. EOPNOTSUPP is choosen because connect() system call is failing after selecting route but before any connection attempt. Signed-off-by: Frédéric Dalleau Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index ed581b4..96bd388 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -176,6 +176,12 @@ static int sco_connect(struct sock *sk) else type = SCO_LINK; + if (sco_pi(sk)->setting == BT_VOICE_TRANSPARENT && + (!lmp_transp_capable(hdev) || !lmp_esco_capable(hdev))) { + err = -EOPNOTSUPP; + goto done; + } + hcon = hci_connect_sco(hdev, type, dst, sco_pi(sk)->setting); if (IS_ERR(hcon)) { err = PTR_ERR(hcon); -- cgit v0.10.2 From 1a4c958cf9b1e159bc63d63b9e362904dd2c4ac3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:24:02 +0200 Subject: Bluetooth: Handle specific error for SCO connection fallback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Synchronous Connection Complete event can return error "Connection Rejected due to Limited resources (0x10)". Handling this error is required for SCO connection fallback. This error happens when the server tried to accept the connection but failed to negotiate settings. This error code has been verified experimentally by sending a T2 request to a T1 only SCO listener. Client dump follows : < HCI Command (0x01|0x0028) plen 17 [hci0] 3.696064 Handle: 12 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Retransmission effort: Optimize for link quality (0x02) Packet type: 0x0380 > HCI Event (0x0f) plen 4 [hci0] 3.697034 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event (0x2c) plen 17 [hci0] 3.736059 Status: Connection Rejected due to Limited Resources (0x0d) Handle: 0 Address: xx:xx:xx:xx:xx:AB (OUI 70-F3-95) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Server dump follows : > HCI Event (0x04) plen 10 [hci0] 4.741513 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Class: 0x620100 Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Uncategorized, code for device not assigned Networking (LAN, Ad hoc) Audio (Speaker, Microphone, Headset) Telephony (Cordless telephony, Modem, Headset) Link type: eSCO (0x02) < HCI Command (0x01|0x0029) plen 21 [hci0] 4.743269 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Retransmission effort: Optimize for link quality (0x02) Packet type: 0x03c1 > HCI Event (0x0f) plen 4 [hci0] 4.745517 Accept Synchronous Connection (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event (0x2c) plen 17 [hci0] 4.749508 Status: Connection Rejected due to Limited Resources (0x0d) Handle: 0 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Signed-off-by: Frédéric Dalleau Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 50e39f4..a8bb7bb 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2904,6 +2904,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, hci_conn_add_sysfs(conn); break; + case 0x0d: /* Connection Rejected due to Limited Resources */ case 0x11: /* Unsupported Feature or Parameter Value */ case 0x1c: /* SCO interval rejected */ case 0x1a: /* Unsupported Remote Feature */ -- cgit v0.10.2 From 2dea632f9acad076370fe871d4ccc93868621403 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Dalleau?= Date: Mon, 19 Aug 2013 14:24:03 +0200 Subject: Bluetooth: Add SCO connection fallback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When initiating a transparent eSCO connection, make use of T2 settings at first try. T2 is the recommended settings from HFP 1.6 WideBand Speech. Upon connection failure, try T1 settings. When CVSD is requested and eSCO is supported, try to establish eSCO connection using S3 settings. If it fails, fallback in sequence to S2, S1, D1, D0 settings. To know which setting should be used, conn->attempt is used. It indicates the currently ongoing SCO connection attempt and can be used as the index for the fallback settings table. These setting and the fallback order are described in Bluetooth HFP 1.6 specification p. 101. Signed-off-by: Frédéric Dalleau Signed-off-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index b2bfab8..3ede820 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -570,7 +570,7 @@ static inline struct hci_conn *hci_conn_hash_lookup_state(struct hci_dev *hdev, } void hci_disconnect(struct hci_conn *conn, __u8 reason); -void hci_setup_sync(struct hci_conn *conn, __u16 handle); +bool hci_setup_sync(struct hci_conn *conn, __u16 handle); void hci_sco_setup(struct hci_conn *conn, __u8 status); struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst); diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index c0e56a5..f081712 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -31,6 +31,24 @@ #include #include +struct sco_param { + u16 pkt_type; + u16 max_latency; +}; + +static const struct sco_param sco_param_cvsd[] = { + { EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a }, /* S3 */ + { EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007 }, /* S2 */ + { EDR_ESCO_MASK | ESCO_EV3, 0x0007 }, /* S1 */ + { EDR_ESCO_MASK | ESCO_HV3, 0xffff }, /* D1 */ + { EDR_ESCO_MASK | ESCO_HV1, 0xffff }, /* D0 */ +}; + +static const struct sco_param sco_param_wideband[] = { + { EDR_ESCO_MASK & ~ESCO_2EV3, 0x000d }, /* T2 */ + { EDR_ESCO_MASK | ESCO_EV3, 0x0008 }, /* T1 */ +}; + static void hci_le_create_connection(struct hci_conn *conn) { struct hci_dev *hdev = conn->hdev; @@ -172,10 +190,11 @@ static void hci_add_sco(struct hci_conn *conn, __u16 handle) hci_send_cmd(hdev, HCI_OP_ADD_SCO, sizeof(cp), &cp); } -void hci_setup_sync(struct hci_conn *conn, __u16 handle) +bool hci_setup_sync(struct hci_conn *conn, __u16 handle) { struct hci_dev *hdev = conn->hdev; struct hci_cp_setup_sync_conn cp; + const struct sco_param *param; BT_DBG("hcon %p", conn); @@ -192,19 +211,28 @@ void hci_setup_sync(struct hci_conn *conn, __u16 handle) switch (conn->setting & SCO_AIRMODE_MASK) { case SCO_AIRMODE_TRANSP: - cp.pkt_type = __constant_cpu_to_le16(EDR_ESCO_MASK & - ~ESCO_2EV3); - cp.max_latency = __constant_cpu_to_le16(0x000d); + if (conn->attempt > ARRAY_SIZE(sco_param_wideband)) + return false; cp.retrans_effort = 0x02; + param = &sco_param_wideband[conn->attempt - 1]; break; case SCO_AIRMODE_CVSD: - cp.pkt_type = cpu_to_le16(conn->pkt_type); - cp.max_latency = __constant_cpu_to_le16(0xffff); - cp.retrans_effort = 0xff; + if (conn->attempt > ARRAY_SIZE(sco_param_cvsd)) + return false; + cp.retrans_effort = 0x01; + param = &sco_param_cvsd[conn->attempt - 1]; break; + default: + return false; } - hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp); + cp.pkt_type = __cpu_to_le16(param->pkt_type); + cp.max_latency = __cpu_to_le16(param->max_latency); + + if (hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0) + return false; + + return true; } void hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index a8bb7bb..94aab73 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2909,11 +2909,11 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, case 0x1c: /* SCO interval rejected */ case 0x1a: /* Unsupported Remote Feature */ case 0x1f: /* Unspecified error */ - if (conn->out && conn->attempt < 2) { + if (conn->out) { conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) | (hdev->esco_type & EDR_ESCO_MASK); - hci_setup_sync(conn, conn->link->handle); - goto unlock; + if (hci_setup_sync(conn, conn->link->handle)) + goto unlock; } /* fall through */ -- cgit v0.10.2 From e133fae263090f5795b8024a4024b81e06770132 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 22 Aug 2013 08:36:41 +0200 Subject: mac80211: minstrel_ht: don't use control.flags in TX status path Sujith reports that my commit af61a165187bb94b1dc7628ef815c23d0eacf40b ("mac80211: add control port protocol TX control flag") broke ath9k (aggregation). The reason is that I made minstrel_ht use the flag in the TX status path, where it can have been overwritten by the driver. Since we have no more space in info->flags, revert that part of the change for now, until we can reshuffle the flags or so. Reported-by: Sujith Manoharan Signed-off-by: Johannes Berg diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 9eff382..c397ff5 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -439,13 +439,12 @@ minstrel_aggr_check(struct ieee80211_sta *pubsta, struct sk_buff *skb) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct sta_info *sta = container_of(pubsta, struct sta_info, sta); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); u16 tid; if (unlikely(!ieee80211_is_data_qos(hdr->frame_control))) return; - if (unlikely(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) + if (unlikely(skb->protocol == cpu_to_be16(ETH_P_PAE))) return; tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK; -- cgit v0.10.2 From b2fcc0aee58a3435566dd6d8501a0b355552f28b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 21 Aug 2013 10:18:19 +0200 Subject: iwl4965: fix rfkill set state regression My current 3.11 fix: commit 788f7a56fce1bcb2067b62b851a086fca48a0056 Author: Stanislaw Gruszka Date: Thu Aug 1 12:07:55 2013 +0200 iwl4965: reset firmware after rfkill off broke rfkill notification to user-space . I missed that bug, because I compiled without CONFIG_RFKILL, sorry about that. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index f2ed62e..7acf5ee 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -4464,9 +4464,9 @@ il4965_irq_tasklet(struct il_priv *il) set_bit(S_RFKILL, &il->status); } else { clear_bit(S_RFKILL, &il->status); - wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); il_force_reset(il, true); } + wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); handled |= CSR_INT_BIT_RF_KILL; } -- cgit v0.10.2 From d2e9fc141e2aa21f4b35ee27072d84e9aa6e2ba0 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Fri, 16 Aug 2013 21:39:40 +0200 Subject: ath9k_htc: Restore skb headroom when returning skb to mac80211 ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by: Marc Kleine-Budde Signed-off-by: Helmut Schaa Tested-by: Marc Kleine-Budde Signed-off-by: Marc Kleine-Budde Cc: stable@vger.kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index e602c95..c028df7 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -448,6 +448,7 @@ static void ath9k_htc_tx_process(struct ath9k_htc_priv *priv, struct ieee80211_conf *cur_conf = &priv->hw->conf; bool txok; int slot; + int hdrlen, padsize; slot = strip_drv_header(priv, skb); if (slot < 0) { @@ -504,6 +505,15 @@ send_mac80211: ath9k_htc_tx_clear_slot(priv, slot); + /* Remove padding before handing frame back to mac80211 */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + + padsize = hdrlen & 3; + if (padsize && skb->len > hdrlen + padsize) { + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); + } + /* Send status to mac80211 */ ieee80211_tx_status(priv->hw, skb); } -- cgit v0.10.2 From 19c361608ce3e73f352e323262f7e0a8264be3af Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 20 Aug 2013 10:05:59 +0530 Subject: ath9k: Enable PLL fix only for AR9340/AR9330 The PLL hang workaround is required only for AR9330 and AR9340. This issue was first observed on an AP121 and the WAR is enabled for AR9340 also (DB120 etc.), since it uses a PLL design identical to AR9330. This is not required for AR9485 and AR9550. Various bugs have been reported regarding this: https://bugzilla.redhat.com/show_bug.cgi?id=997217 https://bugzilla.redhat.com/show_bug.cgi?id=994648 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 1737a3e..cb5a655 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -173,8 +173,7 @@ static void ath_restart_work(struct ath_softc *sc) { ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0); - if (AR_SREV_9340(sc->sc_ah) || AR_SREV_9485(sc->sc_ah) || - AR_SREV_9550(sc->sc_ah)) + if (AR_SREV_9340(sc->sc_ah) || AR_SREV_9330(sc->sc_ah)) ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, msecs_to_jiffies(ATH_PLL_WORK_INTERVAL)); -- cgit v0.10.2 From 91a3fa39ddf2f85a15cb20ccc3a54c1f0497af1e Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 17 Aug 2013 00:15:49 +0200 Subject: rt2x00: rt2800: rename HW_BEACON_OFFSET macro The name of the HW_BEACON_OFFSET macro is a bit confusing. It returns with one of the HW_BEACON_BASE* values, so rename the macro to HW_BEACON_BASE to reflect that. The patch contains no functional changes. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index a313241..6e69b96 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -2019,7 +2019,7 @@ struct mac_iveiv_entry { #define HW_BEACON_BASE6 0x5dc0 #define HW_BEACON_BASE7 0x5bc0 -#define HW_BEACON_OFFSET(__index) \ +#define HW_BEACON_BASE(__index) \ (((__index) < 4) ? (HW_BEACON_BASE0 + (__index * 0x0200)) : \ (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200)))) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 313da6a..704fcfb 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -992,7 +992,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) return; } - beacon_base = HW_BEACON_OFFSET(entry->entry_idx); + beacon_base = HW_BEACON_BASE(entry->entry_idx); rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data, entry->skb->len + padding_len); @@ -1042,7 +1042,7 @@ void rt2800_clear_beacon(struct queue_entry *entry) * Clear beacon. */ rt2800_clear_beacon_register(rt2x00dev, - HW_BEACON_OFFSET(entry->entry_idx)); + HW_BEACON_BASE(entry->entry_idx)); /* * Enabled beaconing again. -- cgit v0.10.2 From 77f7c0f3b8f2d464e841c5c35f3da8b4999a885c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 17 Aug 2013 00:15:50 +0200 Subject: rt2x00: rt2800lib: pass beacon index to rt2800_clear_beacon_register Instead of precomputing the beacon base in each caller, pass the beacon index to the 'rt2800_clear_beacon_register' function and compute the beacon base in there. This allows to simplify the caller functions a bit. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 704fcfb..2f64034 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1011,10 +1011,13 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) EXPORT_SYMBOL_GPL(rt2800_write_beacon); static inline void rt2800_clear_beacon_register(struct rt2x00_dev *rt2x00dev, - unsigned int beacon_base) + unsigned int index) { int i; const int txwi_desc_size = rt2x00dev->bcn->winfo_size; + unsigned int beacon_base; + + beacon_base = HW_BEACON_BASE(index); /* * For the Beacon base registers we only need to clear @@ -1041,8 +1044,7 @@ void rt2800_clear_beacon(struct queue_entry *entry) /* * Clear beacon. */ - rt2800_clear_beacon_register(rt2x00dev, - HW_BEACON_BASE(entry->entry_idx)); + rt2800_clear_beacon_register(rt2x00dev, entry->entry_idx); /* * Enabled beaconing again. @@ -4803,14 +4805,8 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) /* * Clear all beacons */ - rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE0); - rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE1); - rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE2); - rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE3); - rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE4); - rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE5); - rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE6); - rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE7); + for (i = 0; i < 8; i++) + rt2800_clear_beacon_register(rt2x00dev, i); if (rt2x00_is_usb(rt2x00dev)) { rt2800_register_read(rt2x00dev, US_CYC_CNT, ®); -- cgit v0.10.2 From c1fada4e5e53d88a8edd3ff01cee9d316cbf6025 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 17 Aug 2013 14:09:28 +0200 Subject: rt2x00: rt2800lib: fix frequency offset boundary calculation The current code in the 'rt2800_adjust_freq_offset' function limits the device specific frequency offset value to FREQ_BOUND but ignores the fact that the uppermost bit is not part of the frequency offset value. As the result, the driver always uses the FREQ_BOUND value if the uppermost bit is set. Update the code to use the correct source value for calculating the boundary. Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RTMPAdjustFrequencyOffset function in common/rt_rf.c Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 2f64034..de27277 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2496,13 +2496,14 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) { + u8 freq_offset; u8 rfcsr; + freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE); + freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND); + rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr); - if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND) - rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND); - else - rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset); + rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset); rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); } -- cgit v0.10.2 From 6af1bdccabe956a08a37f2ae049d37307ec0c91c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 17 Aug 2013 14:09:29 +0200 Subject: rt2x00: rt2800lib: optimize frequency offset adjustment Don't write the new value into the register if it is the same as the old value to avoid unncessary USB bus traffic with USB devices. The change also saves a few cycle on MMIO based devices. Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RTMPAdjustFrequencyOffset function in common/rt_rf.c Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index de27277..3407ac9 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2497,13 +2497,18 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) { u8 freq_offset; - u8 rfcsr; + u8 rfcsr, prev_rfcsr; freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE); freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND); rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr); + prev_rfcsr = rfcsr; + rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset); + if (rfcsr == prev_rfcsr) + return; + rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); } -- cgit v0.10.2 From 76773f301f2210dcc20c466aebda7118062673eb Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 17 Aug 2013 14:09:30 +0200 Subject: rt2x00: rt2800lib: use a MCU command for frequency adjustment on USB devices According to the Ralink driver, there is an MCU command which can be used to send the frequency offset value directly to the USB device without going through the RFCSR writing sequence. Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RTMPAdjustFrequencyOffset function in common/rt_rf.c Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 6e69b96..e25e5bf 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -2794,6 +2794,7 @@ enum rt2800_eeprom_word { #define MCU_RADAR 0x60 #define MCU_BOOT_SIGNAL 0x72 #define MCU_ANT_SELECT 0X73 +#define MCU_FREQ_OFFSET 0x74 #define MCU_BBP_SIGNAL 0x80 #define MCU_POWER_SAVE 0x83 #define MCU_BAND_SELECT 0x91 diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 3407ac9..bebc56f 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2509,7 +2509,11 @@ static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) if (rfcsr == prev_rfcsr) return; - rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); + if (rt2x00_is_usb(rt2x00dev)) + rt2800_mcu_request(rt2x00dev, MCU_FREQ_OFFSET, 0xff, + freq_offset, prev_rfcsr); + else + rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); } static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev, -- cgit v0.10.2 From 8d38eca8e089179b6858ca5f3ea03f571a5892a5 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 17 Aug 2013 14:09:31 +0200 Subject: rt2x00: rt2800lib: use step-by-step frequency offset adjustment on MMIO devices According to the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver, the RFCSR17 register can't be programmed in one step on devices which are using the frequency offset adjustment code. Update the code to use step-by-step adjustment. Reference: RT30xxWriteRFRegister function in common/rt_rf.c Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index bebc56f..623ad9d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2496,7 +2496,7 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) { - u8 freq_offset; + u8 freq_offset, prev_freq_offset; u8 rfcsr, prev_rfcsr; freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE); @@ -2509,11 +2509,24 @@ static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) if (rfcsr == prev_rfcsr) return; - if (rt2x00_is_usb(rt2x00dev)) + if (rt2x00_is_usb(rt2x00dev)) { rt2800_mcu_request(rt2x00dev, MCU_FREQ_OFFSET, 0xff, freq_offset, prev_rfcsr); - else + return; + } + + prev_freq_offset = rt2x00_get_field8(prev_rfcsr, RFCSR17_CODE); + while (prev_freq_offset != freq_offset) { + if (prev_freq_offset < freq_offset) + prev_freq_offset++; + else + prev_freq_offset--; + + rt2x00_set_field8(&rfcsr, RFCSR17_CODE, prev_freq_offset); rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); + + usleep_range(1000, 1500); + } } static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev, -- cgit v0.10.2 From 3f1b8739a498c7570ca2fae6c49fd1561ef2358c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 17 Aug 2013 14:09:32 +0200 Subject: rt2x00: rt2800lib: move rt2800_adjust_freq_offset function Move the rt2800_adjust_freq_offset function before the channel configuration functions to make it usable from those without a forward declaration. The patch contains no functional changes. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 623ad9d..1b81fc9 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1875,6 +1875,43 @@ static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev, rt2x00dev->lna_gain = lna_gain; } +#define FREQ_OFFSET_BOUND 0x5f + +static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) +{ + u8 freq_offset, prev_freq_offset; + u8 rfcsr, prev_rfcsr; + + freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE); + freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND); + + rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr); + prev_rfcsr = rfcsr; + + rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset); + if (rfcsr == prev_rfcsr) + return; + + if (rt2x00_is_usb(rt2x00dev)) { + rt2800_mcu_request(rt2x00dev, MCU_FREQ_OFFSET, 0xff, + freq_offset, prev_rfcsr); + return; + } + + prev_freq_offset = rt2x00_get_field8(prev_rfcsr, RFCSR17_CODE); + while (prev_freq_offset != freq_offset) { + if (prev_freq_offset < freq_offset) + prev_freq_offset++; + else + prev_freq_offset--; + + rt2x00_set_field8(&rfcsr, RFCSR17_CODE, prev_freq_offset); + rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); + + usleep_range(1000, 1500); + } +} + static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, struct rf_channel *rf, @@ -2492,42 +2529,6 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, #define POWER_BOUND 0x27 #define POWER_BOUND_5G 0x2b -#define FREQ_OFFSET_BOUND 0x5f - -static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev) -{ - u8 freq_offset, prev_freq_offset; - u8 rfcsr, prev_rfcsr; - - freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE); - freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND); - - rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr); - prev_rfcsr = rfcsr; - - rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset); - if (rfcsr == prev_rfcsr) - return; - - if (rt2x00_is_usb(rt2x00dev)) { - rt2800_mcu_request(rt2x00dev, MCU_FREQ_OFFSET, 0xff, - freq_offset, prev_rfcsr); - return; - } - - prev_freq_offset = rt2x00_get_field8(prev_rfcsr, RFCSR17_CODE); - while (prev_freq_offset != freq_offset) { - if (prev_freq_offset < freq_offset) - prev_freq_offset++; - else - prev_freq_offset--; - - rt2x00_set_field8(&rfcsr, RFCSR17_CODE, prev_freq_offset); - rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); - - usleep_range(1000, 1500); - } -} static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, -- cgit v0.10.2 From e979a8ab204edbf7b0815162109ee9c85e4d7ea5 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 17 Aug 2013 14:09:33 +0200 Subject: rt2x00: rt2800lib: adjust frequency offset for RF3053 Along with other chipsets, the Ralink driver uses the frequency adjustment code for RF3053 as well. Remove the bogus place-holder comment from the RF3053 specific channel configuration function and call the frequency adjustment function instead Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RT3593_ChipSwitchChannel function in chips/rt3593.c Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 1b81fc9..aa6b6b0 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2360,7 +2360,7 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, } rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - /* TODO: frequency calibration? */ + rt2800_adjust_freq_offset(rt2x00dev); if (conf_is_ht40(conf)) { txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40, -- cgit v0.10.2 From fb5a2dcbbcf19f8ff7e5312b2340460bc03a4b89 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 19 Aug 2013 11:03:43 +0530 Subject: ath9k: Add support for AR9485 1.2 Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index d402cb3..738aa7e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -153,7 +153,7 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah) if (!ah->is_clk_25mhz) INIT_INI_ARRAY(&ah->iniAdditional, ar9340_1p0_radio_core_40M); - } else if (AR_SREV_9485_11(ah)) { + } else if (AR_SREV_9485_11_OR_LATER(ah)) { /* mac */ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE], ar9485_1_1_mac_core); @@ -424,7 +424,7 @@ static void ar9003_tx_gain_table_mode0(struct ath_hw *ah) else if (AR_SREV_9340(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9340Modes_lowest_ob_db_tx_gain_table_1p0); - else if (AR_SREV_9485_11(ah)) + else if (AR_SREV_9485_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9485_modes_lowest_ob_db_tx_gain_1_1); else if (AR_SREV_9550(ah)) @@ -458,7 +458,7 @@ static void ar9003_tx_gain_table_mode1(struct ath_hw *ah) else if (AR_SREV_9340(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9340Modes_high_ob_db_tx_gain_table_1p0); - else if (AR_SREV_9485_11(ah)) + else if (AR_SREV_9485_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9485Modes_high_ob_db_tx_gain_1_1); else if (AR_SREV_9580(ah)) @@ -492,7 +492,7 @@ static void ar9003_tx_gain_table_mode2(struct ath_hw *ah) else if (AR_SREV_9340(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9340Modes_low_ob_db_tx_gain_table_1p0); - else if (AR_SREV_9485_11(ah)) + else if (AR_SREV_9485_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9485Modes_low_ob_db_tx_gain_1_1); else if (AR_SREV_9580(ah)) @@ -517,7 +517,7 @@ static void ar9003_tx_gain_table_mode3(struct ath_hw *ah) else if (AR_SREV_9340(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9340Modes_high_power_tx_gain_table_1p0); - else if (AR_SREV_9485_11(ah)) + else if (AR_SREV_9485_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9485Modes_high_power_tx_gain_1_1); else if (AR_SREV_9580(ah)) @@ -552,7 +552,7 @@ static void ar9003_tx_gain_table_mode4(struct ath_hw *ah) static void ar9003_tx_gain_table_mode5(struct ath_hw *ah) { - if (AR_SREV_9485_11(ah)) + if (AR_SREV_9485_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9485Modes_green_ob_db_tx_gain_1_1); else if (AR_SREV_9340(ah)) @@ -571,7 +571,7 @@ static void ar9003_tx_gain_table_mode6(struct ath_hw *ah) if (AR_SREV_9340(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9340Modes_low_ob_db_and_spur_tx_gain_table_1p0); - else if (AR_SREV_9485_11(ah)) + else if (AR_SREV_9485_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9485Modes_green_spur_ob_db_tx_gain_1_1); else if (AR_SREV_9580(ah)) @@ -611,7 +611,7 @@ static void ar9003_rx_gain_table_mode0(struct ath_hw *ah) else if (AR_SREV_9340(ah)) INIT_INI_ARRAY(&ah->iniModesRxGain, ar9340Common_rx_gain_table_1p0); - else if (AR_SREV_9485_11(ah)) + else if (AR_SREV_9485_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesRxGain, ar9485_common_rx_gain_1_1); else if (AR_SREV_9550(ah)) { @@ -644,7 +644,7 @@ static void ar9003_rx_gain_table_mode1(struct ath_hw *ah) else if (AR_SREV_9340(ah)) INIT_INI_ARRAY(&ah->iniModesRxGain, ar9340Common_wo_xlna_rx_gain_table_1p0); - else if (AR_SREV_9485_11(ah)) + else if (AR_SREV_9485_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesRxGain, ar9485Common_wo_xlna_rx_gain_1_1); else if (AR_SREV_9462_21(ah)) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 18a5aa4..46b910a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1449,7 +1449,7 @@ static void ar9003_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable) regval |= (ant_div_ctl1 & 0x3f) << AR_ANT_DIV_CTRL_ALL_S; REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); - if (AR_SREV_9485_11(ah)) { + if (AR_SREV_9485_11_OR_LATER(ah)) { /* * Enable LNA diversity. */ diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 5af9744..a13b2d1 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -893,9 +893,9 @@ #define AR_SREV_9485(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485)) -#define AR_SREV_9485_11(_ah) \ - (AR_SREV_9485(_ah) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9485_11)) +#define AR_SREV_9485_11_OR_LATER(_ah) \ + (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485) && \ + ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9485_11)) #define AR_SREV_9485_OR_LATER(_ah) \ (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9485)) -- cgit v0.10.2 From e083a42ef616b6987c024cccfec72cec75a1f1f5 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 19 Aug 2013 11:04:01 +0530 Subject: ath9k: Add antenna diversity tweak for CUS198 This improves RX diversity and performance for AR9485. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index abdc7ee..a6846ab 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3825,6 +3825,11 @@ static void ar9003_hw_atten_apply(struct ath_hw *ah, struct ath9k_channel *chan) else value = ar9003_hw_atten_chain_get_margin(ah, i, chan); + if (ah->config.alt_mingainidx) + REG_RMW_FIELD(ah, AR_PHY_EXT_ATTEN_CTL_0, + AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, + value); + REG_RMW_FIELD(ah, ext_atten_reg[i], AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, value); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 23c019d..6fd7523 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -148,6 +148,8 @@ #define AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S 28 #define AR_PHY_EXT_CCA_THRESH62 0x007F0000 #define AR_PHY_EXT_CCA_THRESH62_S 16 +#define AR_PHY_EXTCHN_PWRTHR1_ANT_DIV_ALT_ANT_MINGAINIDX 0x0000FF00 +#define AR_PHY_EXTCHN_PWRTHR1_ANT_DIV_ALT_ANT_MINGAINIDX_S 8 #define AR_PHY_EXT_MINCCA_PWR 0x01FF0000 #define AR_PHY_EXT_MINCCA_PWR_S 16 #define AR_PHY_EXT_CYCPWR_THR1 0x0000FE00L diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 64ff8e6..fa543a6 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -314,6 +314,7 @@ struct ath9k_ops_config { u32 xlna_gpio; u32 ant_ctrl_comm2g_switch_enable; bool xatten_margin_cfg; + bool alt_mingainidx; }; enum ath9k_int { diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index abf1eb5..19b46c7 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -534,6 +534,7 @@ static void ath9k_init_platform(struct ath_softc *sc) ATH9K_PCI_CUS230)) { ah->config.xlna_gpio = 9; ah->config.xatten_margin_cfg = true; + ah->config.alt_mingainidx = true; ah->config.ant_ctrl_comm2g_switch_enable = 0x000BBB88; sc->ant_comb.low_rssi_thresh = 20; sc->ant_comb.fast_div_bias = 3; -- cgit v0.10.2 From 1211c961170cedb21c30d5bb7e2033c8720b38db Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 19 Aug 2013 16:10:21 -0700 Subject: mwifiex: do not create AP and P2P interfaces upon driver loading Bug 60747 - 1286:2044 [Microsoft Surface Pro] Marvell 88W8797 wifi show 3 interface under network https://bugzilla.kernel.org/show_bug.cgi?id=60747 This issue was also reported previously by OLPC and some folks from the community. There are 3 network interfaces with different types being created when mwifiex driver is loaded: 1. mlan0 (infra. STA) 2. uap0 (AP) 3. p2p0 (P2P_CLIENT) The Network Manager attempts to use all 3 interfaces above without filtering the managed interface type. As the result, 3 identical interfaces are displayed under network manager. If user happens to click on an entry under which its interface is uap0 or p2p0, the association will fail. Work around it by removing the creation of AP and P2P interfaces at driver loading time. These interfaces can be added with 'iw' or other applications manually when they are needed. Signed-off-by: Bing Zhao Signed-off-by: Avinash Patil Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index 3402bff..fd77833 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -477,20 +477,6 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context) dev_err(adapter->dev, "cannot create default STA interface\n"); goto err_add_intf; } - - /* Create AP interface by default */ - if (!mwifiex_add_virtual_intf(adapter->wiphy, "uap%d", - NL80211_IFTYPE_AP, NULL, NULL)) { - dev_err(adapter->dev, "cannot create default AP interface\n"); - goto err_add_intf; - } - - /* Create P2P interface by default */ - if (!mwifiex_add_virtual_intf(adapter->wiphy, "p2p%d", - NL80211_IFTYPE_P2P_CLIENT, NULL, NULL)) { - dev_err(adapter->dev, "cannot create default P2P interface\n"); - goto err_add_intf; - } rtnl_unlock(); mwifiex_drv_get_driver_version(adapter, fmt, sizeof(fmt) - 1); -- cgit v0.10.2 From f4d907046c3918005a1e4df0990461183c06e1bc Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 20 Aug 2013 13:05:58 +0530 Subject: ath9k: Add one more PCI ID for CUS198 This is a AR9485/WB225 based card. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 76e8c35..3280798 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -59,6 +59,11 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { PCI_VENDOR_ID_AZWAVE, 0x2126), .driver_data = ATH9K_PCI_CUS198 | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0032, + PCI_VENDOR_ID_AZWAVE, + 0x126A), + .driver_data = ATH9K_PCI_CUS198 | ATH9K_PCI_BT_ANT_DIV }, /* PCI-E CUS230 */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, -- cgit v0.10.2 From 02ab8567ef14001d0b2e655bb726f52083bdd101 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:35 +0200 Subject: brcmsmac: cosmetic change in phy_lcn.c Cleaning up some code fragments reducing indentation and uncluttering some lines. Apart from whitespace there are no actual code changes made. Cc: Jonas Gorski Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 3d6b16c..e646ba0 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -1137,8 +1137,9 @@ wlc_lcnphy_set_rx_gain_by_distribution(struct brcms_phy *pi, gain0_15 = ((biq1 & 0xf) << 12) | ((tia & 0xf) << 8) | ((lna2 & 0x3) << 6) | - ((lna2 & - 0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0); + ((lna2 & 0x3) << 4) | + ((lna1 & 0x3) << 2) | + ((lna1 & 0x3) << 0); mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0); mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0); @@ -1368,126 +1369,124 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, goto cal_done; } - if (module == 1) { + WARN_ON(module != 1); + tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi); + wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF); - tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi); - wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF); + for (i = 0; i < 11; i++) + values_to_save[i] = + read_radio_reg(pi, rxiq_cal_rf_reg[i]); + Core1TxControl_old = read_phy_reg(pi, 0x631); + + or_phy_reg(pi, 0x631, 0x0015); + + RFOverride0_old = read_phy_reg(pi, 0x44c); + RFOverrideVal0_old = read_phy_reg(pi, 0x44d); + rfoverride2_old = read_phy_reg(pi, 0x4b0); + rfoverride2val_old = read_phy_reg(pi, 0x4b1); + rfoverride3_old = read_phy_reg(pi, 0x4f9); + rfoverride3val_old = read_phy_reg(pi, 0x4fa); + rfoverride4_old = read_phy_reg(pi, 0x938); + rfoverride4val_old = read_phy_reg(pi, 0x939); + afectrlovr_old = read_phy_reg(pi, 0x43b); + afectrlovrval_old = read_phy_reg(pi, 0x43c); + old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da); + old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db); - for (i = 0; i < 11; i++) - values_to_save[i] = - read_radio_reg(pi, rxiq_cal_rf_reg[i]); - Core1TxControl_old = read_phy_reg(pi, 0x631); - - or_phy_reg(pi, 0x631, 0x0015); - - RFOverride0_old = read_phy_reg(pi, 0x44c); - RFOverrideVal0_old = read_phy_reg(pi, 0x44d); - rfoverride2_old = read_phy_reg(pi, 0x4b0); - rfoverride2val_old = read_phy_reg(pi, 0x4b1); - rfoverride3_old = read_phy_reg(pi, 0x4f9); - rfoverride3val_old = read_phy_reg(pi, 0x4fa); - rfoverride4_old = read_phy_reg(pi, 0x938); - rfoverride4val_old = read_phy_reg(pi, 0x939); - afectrlovr_old = read_phy_reg(pi, 0x43b); - afectrlovrval_old = read_phy_reg(pi, 0x43c); - old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da); - old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db); - - tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi); - if (tx_gain_override_old) { - wlc_lcnphy_get_tx_gain(pi, &old_gains); - tx_gain_index_old = pi_lcn->lcnphy_current_index; - } + tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi); + if (tx_gain_override_old) { + wlc_lcnphy_get_tx_gain(pi, &old_gains); + tx_gain_index_old = pi_lcn->lcnphy_current_index; + } - wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx); + wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx); - mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0); + mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0); - mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1); + mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1); - write_radio_reg(pi, RADIO_2064_REG116, 0x06); - write_radio_reg(pi, RADIO_2064_REG12C, 0x07); - write_radio_reg(pi, RADIO_2064_REG06A, 0xd3); - write_radio_reg(pi, RADIO_2064_REG098, 0x03); - write_radio_reg(pi, RADIO_2064_REG00B, 0x7); - mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4); - write_radio_reg(pi, RADIO_2064_REG01D, 0x01); - write_radio_reg(pi, RADIO_2064_REG114, 0x01); - write_radio_reg(pi, RADIO_2064_REG02E, 0x10); - write_radio_reg(pi, RADIO_2064_REG12A, 0x08); - - mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0); - mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1); - mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2); - mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2); - mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3); - mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3); - mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5); - mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5); - - mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); - mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); - - wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0); - write_phy_reg(pi, 0x6da, 0xffff); - or_phy_reg(pi, 0x6db, 0x3); - wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); - wlc_lcnphy_rx_gain_override_enable(pi, true); - - tia_gain = 8; - rx_pwr_threshold = 950; - while (tia_gain > 0) { - tia_gain -= 1; - wlc_lcnphy_set_rx_gain_by_distribution(pi, - 0, 0, 2, 2, - (u16) - tia_gain, 1, 0); - udelay(500); + write_radio_reg(pi, RADIO_2064_REG116, 0x06); + write_radio_reg(pi, RADIO_2064_REG12C, 0x07); + write_radio_reg(pi, RADIO_2064_REG06A, 0xd3); + write_radio_reg(pi, RADIO_2064_REG098, 0x03); + write_radio_reg(pi, RADIO_2064_REG00B, 0x7); + mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4); + write_radio_reg(pi, RADIO_2064_REG01D, 0x01); + write_radio_reg(pi, RADIO_2064_REG114, 0x01); + write_radio_reg(pi, RADIO_2064_REG02E, 0x10); + write_radio_reg(pi, RADIO_2064_REG12A, 0x08); + + mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0); + mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1); + mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2); + mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2); + mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3); + mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3); + mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5); + mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5); - received_power = - wlc_lcnphy_measure_digital_power(pi, 2000); - if (received_power < rx_pwr_threshold) - break; - } - result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff); + mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); + mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); - wlc_lcnphy_stop_tx_tone(pi); + wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0); + write_phy_reg(pi, 0x6da, 0xffff); + or_phy_reg(pi, 0x6db, 0x3); + wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); + wlc_lcnphy_rx_gain_override_enable(pi, true); - write_phy_reg(pi, 0x631, Core1TxControl_old); + tia_gain = 8; + rx_pwr_threshold = 950; + while (tia_gain > 0) { + tia_gain -= 1; + wlc_lcnphy_set_rx_gain_by_distribution(pi, + 0, 0, 2, 2, + (u16) + tia_gain, 1, 0); + udelay(500); - write_phy_reg(pi, 0x44c, RFOverrideVal0_old); - write_phy_reg(pi, 0x44d, RFOverrideVal0_old); - write_phy_reg(pi, 0x4b0, rfoverride2_old); - write_phy_reg(pi, 0x4b1, rfoverride2val_old); - write_phy_reg(pi, 0x4f9, rfoverride3_old); - write_phy_reg(pi, 0x4fa, rfoverride3val_old); - write_phy_reg(pi, 0x938, rfoverride4_old); - write_phy_reg(pi, 0x939, rfoverride4val_old); - write_phy_reg(pi, 0x43b, afectrlovr_old); - write_phy_reg(pi, 0x43c, afectrlovrval_old); - write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl); - write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl); + received_power = + wlc_lcnphy_measure_digital_power(pi, 2000); + if (received_power < rx_pwr_threshold) + break; + } + result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff); - wlc_lcnphy_clear_trsw_override(pi); + wlc_lcnphy_stop_tx_tone(pi); - mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2); + write_phy_reg(pi, 0x631, Core1TxControl_old); + + write_phy_reg(pi, 0x44c, RFOverrideVal0_old); + write_phy_reg(pi, 0x44d, RFOverrideVal0_old); + write_phy_reg(pi, 0x4b0, rfoverride2_old); + write_phy_reg(pi, 0x4b1, rfoverride2val_old); + write_phy_reg(pi, 0x4f9, rfoverride3_old); + write_phy_reg(pi, 0x4fa, rfoverride3val_old); + write_phy_reg(pi, 0x938, rfoverride4_old); + write_phy_reg(pi, 0x939, rfoverride4val_old); + write_phy_reg(pi, 0x43b, afectrlovr_old); + write_phy_reg(pi, 0x43c, afectrlovrval_old); + write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl); + write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl); - for (i = 0; i < 11; i++) - write_radio_reg(pi, rxiq_cal_rf_reg[i], - values_to_save[i]); + wlc_lcnphy_clear_trsw_override(pi); - if (tx_gain_override_old) - wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old); - else - wlc_lcnphy_disable_tx_gain_override(pi); + mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2); - wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl); - wlc_lcnphy_rx_gain_override_enable(pi, false); - } + for (i = 0; i < 11; i++) + write_radio_reg(pi, rxiq_cal_rf_reg[i], + values_to_save[i]); + + if (tx_gain_override_old) + wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old); + else + wlc_lcnphy_disable_tx_gain_override(pi); + + wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl); + wlc_lcnphy_rx_gain_override_enable(pi, false); cal_done: kfree(ptr); -- cgit v0.10.2 From acf97e9b5a5246da1193cb564377a4e7793eb29e Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:36 +0200 Subject: brcmsmac: change pa_gain for bcm4313 iPA The function wlc_lcnphy_load_tx_gain_table() has a target PA gain specified for the iPA variant of the bcm4313. This gain value is reduced to avoid PA distortion. The if-statement is removed because it was rather redundant in the first place. Please note that this patch does not provide full iPA support. Cc: Jonas Gorski Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index e646ba0..8dc5d0f 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -4282,13 +4282,10 @@ wlc_lcnphy_load_tx_gain_table(struct brcms_phy *pi, u16 pa_gain; u16 gm_gain; - if (CHSPEC_IS5G(pi->radio_chanspec)) - pa_gain = 0x70; - else - pa_gain = 0x70; - if (pi->sh->boardflags & BFL_FEM) pa_gain = 0x10; + else + pa_gain = 0x60; tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL; tab.tbl_width = 32; tab.tbl_len = 1; -- cgit v0.10.2 From d6b81daaa2afaa17d39b34e36ca17bc6062b4bc5 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:37 +0200 Subject: brcmsmac: use ARRAY_SIZE in phytbl_lcn.c This patch converts all sizeof(x)/sizeof(x[0]) instances to ARRAY_SIZE macro in phytbl_lcn.c. The patch was made using spatch with ARRAY_SIZE.cocci (see [1]). [1] https://github.com/coccinelle/coccinelle/tree/master/demos/janitorings Cc: Jonas Gorski Tested-by: David Herrmann Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c index 622c01c..deae3a7 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c @@ -1507,117 +1507,103 @@ static const u32 dot11lcn_gain_tbl_5G[] = { const struct phytbl_info dot11lcnphytbl_rx_gain_info_rev0[] = { {&dot11lcn_gain_tbl_rev0, - sizeof(dot11lcn_gain_tbl_rev0) / sizeof(dot11lcn_gain_tbl_rev0[0]), 18, + ARRAY_SIZE(dot11lcn_gain_tbl_rev0), 18, 0, 32} , {&dot11lcn_aux_gain_idx_tbl_rev0, - sizeof(dot11lcn_aux_gain_idx_tbl_rev0) / - sizeof(dot11lcn_aux_gain_idx_tbl_rev0[0]), 14, 0, 16} + ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_rev0), 14, 0, 16} , {&dot11lcn_gain_idx_tbl_rev0, - sizeof(dot11lcn_gain_idx_tbl_rev0) / - sizeof(dot11lcn_gain_idx_tbl_rev0[0]), 13, 0, 32} + ARRAY_SIZE(dot11lcn_gain_idx_tbl_rev0), 13, 0, 32} , }; static const struct phytbl_info dot11lcnphytbl_rx_gain_info_rev1[] = { {&dot11lcn_gain_tbl_rev1, - sizeof(dot11lcn_gain_tbl_rev1) / sizeof(dot11lcn_gain_tbl_rev1[0]), 18, + ARRAY_SIZE(dot11lcn_gain_tbl_rev1), 18, 0, 32} , {&dot11lcn_aux_gain_idx_tbl_rev0, - sizeof(dot11lcn_aux_gain_idx_tbl_rev0) / - sizeof(dot11lcn_aux_gain_idx_tbl_rev0[0]), 14, 0, 16} + ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_rev0), 14, 0, 16} , {&dot11lcn_gain_idx_tbl_rev0, - sizeof(dot11lcn_gain_idx_tbl_rev0) / - sizeof(dot11lcn_gain_idx_tbl_rev0[0]), 13, 0, 32} + ARRAY_SIZE(dot11lcn_gain_idx_tbl_rev0), 13, 0, 32} , }; const struct phytbl_info dot11lcnphytbl_rx_gain_info_2G_rev2[] = { {&dot11lcn_gain_tbl_2G, - sizeof(dot11lcn_gain_tbl_2G) / sizeof(dot11lcn_gain_tbl_2G[0]), 18, 0, + ARRAY_SIZE(dot11lcn_gain_tbl_2G), 18, 0, 32} , {&dot11lcn_aux_gain_idx_tbl_2G, - sizeof(dot11lcn_aux_gain_idx_tbl_2G) / - sizeof(dot11lcn_aux_gain_idx_tbl_2G[0]), 14, 0, 16} + ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_2G), 14, 0, 16} , {&dot11lcn_gain_idx_tbl_2G, - sizeof(dot11lcn_gain_idx_tbl_2G) / sizeof(dot11lcn_gain_idx_tbl_2G[0]), + ARRAY_SIZE(dot11lcn_gain_idx_tbl_2G), 13, 0, 32} , {&dot11lcn_gain_val_tbl_2G, - sizeof(dot11lcn_gain_val_tbl_2G) / sizeof(dot11lcn_gain_val_tbl_2G[0]), + ARRAY_SIZE(dot11lcn_gain_val_tbl_2G), 17, 0, 8} }; const struct phytbl_info dot11lcnphytbl_rx_gain_info_5G_rev2[] = { {&dot11lcn_gain_tbl_5G, - sizeof(dot11lcn_gain_tbl_5G) / sizeof(dot11lcn_gain_tbl_5G[0]), 18, 0, + ARRAY_SIZE(dot11lcn_gain_tbl_5G), 18, 0, 32} , {&dot11lcn_aux_gain_idx_tbl_5G, - sizeof(dot11lcn_aux_gain_idx_tbl_5G) / - sizeof(dot11lcn_aux_gain_idx_tbl_5G[0]), 14, 0, 16} + ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_5G), 14, 0, 16} , {&dot11lcn_gain_idx_tbl_5G, - sizeof(dot11lcn_gain_idx_tbl_5G) / sizeof(dot11lcn_gain_idx_tbl_5G[0]), + ARRAY_SIZE(dot11lcn_gain_idx_tbl_5G), 13, 0, 32} , {&dot11lcn_gain_val_tbl_5G, - sizeof(dot11lcn_gain_val_tbl_5G) / sizeof(dot11lcn_gain_val_tbl_5G[0]), + ARRAY_SIZE(dot11lcn_gain_val_tbl_5G), 17, 0, 8} }; const struct phytbl_info dot11lcnphytbl_rx_gain_info_extlna_2G_rev2[] = { {&dot11lcn_gain_tbl_extlna_2G, - sizeof(dot11lcn_gain_tbl_extlna_2G) / - sizeof(dot11lcn_gain_tbl_extlna_2G[0]), 18, 0, 32} + ARRAY_SIZE(dot11lcn_gain_tbl_extlna_2G), 18, 0, 32} , {&dot11lcn_aux_gain_idx_tbl_extlna_2G, - sizeof(dot11lcn_aux_gain_idx_tbl_extlna_2G) / - sizeof(dot11lcn_aux_gain_idx_tbl_extlna_2G[0]), 14, 0, 16} + ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_extlna_2G), 14, 0, 16} , {&dot11lcn_gain_idx_tbl_extlna_2G, - sizeof(dot11lcn_gain_idx_tbl_extlna_2G) / - sizeof(dot11lcn_gain_idx_tbl_extlna_2G[0]), 13, 0, 32} + ARRAY_SIZE(dot11lcn_gain_idx_tbl_extlna_2G), 13, 0, 32} , {&dot11lcn_gain_val_tbl_extlna_2G, - sizeof(dot11lcn_gain_val_tbl_extlna_2G) / - sizeof(dot11lcn_gain_val_tbl_extlna_2G[0]), 17, 0, 8} + ARRAY_SIZE(dot11lcn_gain_val_tbl_extlna_2G), 17, 0, 8} }; const struct phytbl_info dot11lcnphytbl_rx_gain_info_extlna_5G_rev2[] = { {&dot11lcn_gain_tbl_5G, - sizeof(dot11lcn_gain_tbl_5G) / sizeof(dot11lcn_gain_tbl_5G[0]), 18, 0, + ARRAY_SIZE(dot11lcn_gain_tbl_5G), 18, 0, 32} , {&dot11lcn_aux_gain_idx_tbl_5G, - sizeof(dot11lcn_aux_gain_idx_tbl_5G) / - sizeof(dot11lcn_aux_gain_idx_tbl_5G[0]), 14, 0, 16} + ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_5G), 14, 0, 16} , {&dot11lcn_gain_idx_tbl_5G, - sizeof(dot11lcn_gain_idx_tbl_5G) / sizeof(dot11lcn_gain_idx_tbl_5G[0]), + ARRAY_SIZE(dot11lcn_gain_idx_tbl_5G), 13, 0, 32} , {&dot11lcn_gain_val_tbl_5G, - sizeof(dot11lcn_gain_val_tbl_5G) / sizeof(dot11lcn_gain_val_tbl_5G[0]), + ARRAY_SIZE(dot11lcn_gain_val_tbl_5G), 17, 0, 8} }; const u32 dot11lcnphytbl_rx_gain_info_sz_rev0 = - sizeof(dot11lcnphytbl_rx_gain_info_rev0) / - sizeof(dot11lcnphytbl_rx_gain_info_rev0[0]); + ARRAY_SIZE(dot11lcnphytbl_rx_gain_info_rev0); const u32 dot11lcnphytbl_rx_gain_info_2G_rev2_sz = - sizeof(dot11lcnphytbl_rx_gain_info_2G_rev2) / - sizeof(dot11lcnphytbl_rx_gain_info_2G_rev2[0]); + ARRAY_SIZE(dot11lcnphytbl_rx_gain_info_2G_rev2); const u32 dot11lcnphytbl_rx_gain_info_5G_rev2_sz = - sizeof(dot11lcnphytbl_rx_gain_info_5G_rev2) / - sizeof(dot11lcnphytbl_rx_gain_info_5G_rev2[0]); + ARRAY_SIZE(dot11lcnphytbl_rx_gain_info_5G_rev2); static const u16 dot11lcn_min_sig_sq_tbl_rev0[] = { 0x014d, @@ -2771,89 +2757,74 @@ static const u32 dot11lcn_papd_compdelta_tbl_rev0[] = { const struct phytbl_info dot11lcnphytbl_info_rev0[] = { {&dot11lcn_min_sig_sq_tbl_rev0, - sizeof(dot11lcn_min_sig_sq_tbl_rev0) / - sizeof(dot11lcn_min_sig_sq_tbl_rev0[0]), 2, 0, 16} + ARRAY_SIZE(dot11lcn_min_sig_sq_tbl_rev0), 2, 0, 16} , {&dot11lcn_noise_scale_tbl_rev0, - sizeof(dot11lcn_noise_scale_tbl_rev0) / - sizeof(dot11lcn_noise_scale_tbl_rev0[0]), 1, 0, 16} + ARRAY_SIZE(dot11lcn_noise_scale_tbl_rev0), 1, 0, 16} , {&dot11lcn_fltr_ctrl_tbl_rev0, - sizeof(dot11lcn_fltr_ctrl_tbl_rev0) / - sizeof(dot11lcn_fltr_ctrl_tbl_rev0[0]), 11, 0, 32} + ARRAY_SIZE(dot11lcn_fltr_ctrl_tbl_rev0), 11, 0, 32} , {&dot11lcn_ps_ctrl_tbl_rev0, - sizeof(dot11lcn_ps_ctrl_tbl_rev0) / - sizeof(dot11lcn_ps_ctrl_tbl_rev0[0]), 12, 0, 32} + ARRAY_SIZE(dot11lcn_ps_ctrl_tbl_rev0), 12, 0, 32} , {&dot11lcn_gain_idx_tbl_rev0, - sizeof(dot11lcn_gain_idx_tbl_rev0) / - sizeof(dot11lcn_gain_idx_tbl_rev0[0]), 13, 0, 32} + ARRAY_SIZE(dot11lcn_gain_idx_tbl_rev0), 13, 0, 32} , {&dot11lcn_aux_gain_idx_tbl_rev0, - sizeof(dot11lcn_aux_gain_idx_tbl_rev0) / - sizeof(dot11lcn_aux_gain_idx_tbl_rev0[0]), 14, 0, 16} + ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_rev0), 14, 0, 16} , {&dot11lcn_sw_ctrl_tbl_rev0, - sizeof(dot11lcn_sw_ctrl_tbl_rev0) / - sizeof(dot11lcn_sw_ctrl_tbl_rev0[0]), 15, 0, 16} + ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_rev0), 15, 0, 16} , {&dot11lcn_nf_table_rev0, - sizeof(dot11lcn_nf_table_rev0) / sizeof(dot11lcn_nf_table_rev0[0]), 16, + ARRAY_SIZE(dot11lcn_nf_table_rev0), 16, 0, 8} , {&dot11lcn_gain_val_tbl_rev0, - sizeof(dot11lcn_gain_val_tbl_rev0) / - sizeof(dot11lcn_gain_val_tbl_rev0[0]), 17, 0, 8} + ARRAY_SIZE(dot11lcn_gain_val_tbl_rev0), 17, 0, 8} , {&dot11lcn_gain_tbl_rev0, - sizeof(dot11lcn_gain_tbl_rev0) / sizeof(dot11lcn_gain_tbl_rev0[0]), 18, + ARRAY_SIZE(dot11lcn_gain_tbl_rev0), 18, 0, 32} , {&dot11lcn_spur_tbl_rev0, - sizeof(dot11lcn_spur_tbl_rev0) / sizeof(dot11lcn_spur_tbl_rev0[0]), 20, + ARRAY_SIZE(dot11lcn_spur_tbl_rev0), 20, 0, 8} , {&dot11lcn_unsup_mcs_tbl_rev0, - sizeof(dot11lcn_unsup_mcs_tbl_rev0) / - sizeof(dot11lcn_unsup_mcs_tbl_rev0[0]), 23, 0, 16} + ARRAY_SIZE(dot11lcn_unsup_mcs_tbl_rev0), 23, 0, 16} , {&dot11lcn_iq_local_tbl_rev0, - sizeof(dot11lcn_iq_local_tbl_rev0) / - sizeof(dot11lcn_iq_local_tbl_rev0[0]), 0, 0, 16} + ARRAY_SIZE(dot11lcn_iq_local_tbl_rev0), 0, 0, 16} , {&dot11lcn_papd_compdelta_tbl_rev0, - sizeof(dot11lcn_papd_compdelta_tbl_rev0) / - sizeof(dot11lcn_papd_compdelta_tbl_rev0[0]), 24, 0, 32} + ARRAY_SIZE(dot11lcn_papd_compdelta_tbl_rev0), 24, 0, 32} , }; const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313 = { &dot11lcn_sw_ctrl_tbl_4313_rev0, - sizeof(dot11lcn_sw_ctrl_tbl_4313_rev0) / - sizeof(dot11lcn_sw_ctrl_tbl_4313_rev0[0]), 15, 0, 16 + ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_rev0), 15, 0, 16 }; const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa = { &dot11lcn_sw_ctrl_tbl_4313_epa_rev0, - sizeof(dot11lcn_sw_ctrl_tbl_4313_epa_rev0) / - sizeof(dot11lcn_sw_ctrl_tbl_4313_epa_rev0[0]), 15, 0, 16 + ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_epa_rev0), 15, 0, 16 }; const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa = { &dot11lcn_sw_ctrl_tbl_4313_epa_rev0_combo, - sizeof(dot11lcn_sw_ctrl_tbl_4313_epa_rev0_combo) / - sizeof(dot11lcn_sw_ctrl_tbl_4313_epa_rev0_combo[0]), 15, 0, 16 + ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_epa_rev0_combo), 15, 0, 16 }; const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250 = { &dot11lcn_sw_ctrl_tbl_4313_bt_epa_p250_rev0, - sizeof(dot11lcn_sw_ctrl_tbl_4313_bt_epa_p250_rev0) / - sizeof(dot11lcn_sw_ctrl_tbl_4313_bt_epa_p250_rev0[0]), 15, 0, 16 + ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_bt_epa_p250_rev0), 15, 0, 16 }; const u32 dot11lcnphytbl_info_sz_rev0 = - sizeof(dot11lcnphytbl_info_rev0) / sizeof(dot11lcnphytbl_info_rev0[0]); + ARRAY_SIZE(dot11lcnphytbl_info_rev0); const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_2GHz_extPA_gaintable_rev0[128] = { -- cgit v0.10.2 From 67e39c5ae7369bad2a1c2d631e5b971be2e1edc1 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:38 +0200 Subject: brcmsmac: add debug info message providing phy and radio info For debug purposes it is good to have the phy and radio information available in the log. Only logged when driver is built when BRCMDBG or BRCM_TRACING kconfig are set. Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 7ca10bf..c3c6123 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -4652,7 +4652,9 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, wlc->band->phyrev = wlc_hw->band->phyrev; wlc->band->radioid = wlc_hw->band->radioid; wlc->band->radiorev = wlc_hw->band->radiorev; - + brcms_dbg_info(core, "wl%d: phy %u/%u radio %x/%u\n", unit, + wlc->band->phytype, wlc->band->phyrev, + wlc->band->radioid, wlc->band->radiorev); /* default contention windows size limits */ wlc_hw->band->CWmin = APHY_CWMIN; wlc_hw->band->CWmax = PHY_CWMAX; -- cgit v0.10.2 From ab9a50e387dce5f33a9d7efd64375456ac9d996e Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:39 +0200 Subject: brcmsmac: update transmit gain table for lcn phy Update the transmit gain table for bcm4313 chip family. Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c index deae3a7..efd5a58 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c @@ -2959,134 +2959,134 @@ dot11lcnphy_2GHz_extPA_gaintable_rev0[128] = { }; const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_2GHz_gaintable_rev0[128] = { - {7, 0, 31, 0, 72}, - {7, 0, 31, 0, 70}, - {7, 0, 31, 0, 68}, - {7, 0, 30, 0, 67}, - {7, 0, 29, 0, 68}, - {7, 0, 28, 0, 68}, - {7, 0, 27, 0, 69}, - {7, 0, 26, 0, 70}, - {7, 0, 25, 0, 70}, - {7, 0, 24, 0, 71}, - {7, 0, 23, 0, 72}, - {7, 0, 23, 0, 70}, - {7, 0, 22, 0, 71}, - {7, 0, 21, 0, 72}, - {7, 0, 21, 0, 70}, - {7, 0, 21, 0, 68}, - {7, 0, 21, 0, 66}, - {7, 0, 21, 0, 64}, - {7, 0, 21, 0, 63}, - {7, 0, 20, 0, 64}, - {7, 0, 19, 0, 65}, - {7, 0, 19, 0, 64}, - {7, 0, 18, 0, 65}, - {7, 0, 18, 0, 64}, - {7, 0, 17, 0, 65}, - {7, 0, 17, 0, 64}, - {7, 0, 16, 0, 65}, - {7, 0, 16, 0, 64}, - {7, 0, 16, 0, 62}, - {7, 0, 16, 0, 60}, - {7, 0, 16, 0, 58}, - {7, 0, 15, 0, 61}, - {7, 0, 15, 0, 59}, - {7, 0, 14, 0, 61}, - {7, 0, 14, 0, 60}, - {7, 0, 14, 0, 58}, - {7, 0, 13, 0, 60}, - {7, 0, 13, 0, 59}, - {7, 0, 12, 0, 62}, - {7, 0, 12, 0, 60}, - {7, 0, 12, 0, 58}, - {7, 0, 11, 0, 62}, - {7, 0, 11, 0, 60}, - {7, 0, 11, 0, 59}, - {7, 0, 11, 0, 57}, - {7, 0, 10, 0, 61}, - {7, 0, 10, 0, 59}, - {7, 0, 10, 0, 57}, - {7, 0, 9, 0, 62}, - {7, 0, 9, 0, 60}, - {7, 0, 9, 0, 58}, - {7, 0, 9, 0, 57}, - {7, 0, 8, 0, 62}, - {7, 0, 8, 0, 60}, - {7, 0, 8, 0, 58}, - {7, 0, 8, 0, 57}, - {7, 0, 8, 0, 55}, - {7, 0, 7, 0, 61}, + {15, 0, 31, 0, 72}, + {15, 0, 31, 0, 70}, + {15, 0, 31, 0, 68}, + {15, 0, 30, 0, 68}, + {15, 0, 29, 0, 69}, + {15, 0, 28, 0, 69}, + {15, 0, 27, 0, 70}, + {15, 0, 26, 0, 70}, + {15, 0, 25, 0, 71}, + {15, 0, 24, 0, 72}, + {15, 0, 23, 0, 73}, + {15, 0, 23, 0, 71}, + {15, 0, 22, 0, 72}, + {15, 0, 21, 0, 73}, + {15, 0, 21, 0, 71}, + {15, 0, 21, 0, 69}, + {15, 0, 21, 0, 67}, + {15, 0, 21, 0, 65}, + {15, 0, 21, 0, 63}, + {15, 0, 20, 0, 65}, + {15, 0, 19, 0, 66}, + {15, 0, 19, 0, 64}, + {15, 0, 18, 0, 66}, + {15, 0, 18, 0, 64}, + {15, 0, 17, 0, 66}, + {15, 0, 17, 0, 64}, + {15, 0, 16, 0, 66}, + {15, 0, 16, 0, 64}, + {15, 0, 16, 0, 62}, + {15, 0, 16, 0, 61}, + {15, 0, 16, 0, 59}, + {15, 0, 15, 0, 61}, + {15, 0, 15, 0, 59}, + {15, 0, 14, 0, 62}, + {15, 0, 14, 0, 60}, + {15, 0, 14, 0, 58}, + {15, 0, 13, 0, 61}, + {15, 0, 13, 0, 59}, + {15, 0, 12, 0, 62}, + {15, 0, 12, 0, 61}, + {15, 0, 12, 0, 59}, + {15, 0, 11, 0, 62}, + {15, 0, 11, 0, 61}, + {15, 0, 11, 0, 59}, + {15, 0, 11, 0, 57}, + {15, 0, 10, 0, 61}, + {15, 0, 10, 0, 59}, + {15, 0, 10, 0, 58}, + {15, 0, 9, 0, 62}, + {15, 0, 9, 0, 61}, + {15, 0, 9, 0, 59}, + {15, 0, 9, 0, 57}, + {15, 0, 8, 0, 62}, + {15, 0, 8, 0, 61}, + {15, 0, 8, 0, 59}, + {15, 0, 8, 0, 57}, + {15, 0, 8, 0, 56}, + {15, 0, 8, 0, 54}, + {15, 0, 8, 0, 53}, + {15, 0, 8, 0, 51}, + {15, 0, 8, 0, 50}, + {7, 0, 7, 0, 69}, + {7, 0, 7, 0, 67}, + {7, 0, 7, 0, 65}, + {7, 0, 7, 0, 64}, + {7, 0, 7, 0, 62}, {7, 0, 7, 0, 60}, {7, 0, 7, 0, 58}, - {7, 0, 7, 0, 56}, + {7, 0, 7, 0, 57}, {7, 0, 7, 0, 55}, {7, 0, 6, 0, 62}, - {7, 0, 6, 0, 60}, - {7, 0, 6, 0, 58}, + {7, 0, 6, 0, 61}, + {7, 0, 6, 0, 59}, {7, 0, 6, 0, 57}, - {7, 0, 6, 0, 55}, + {7, 0, 6, 0, 56}, {7, 0, 6, 0, 54}, - {7, 0, 6, 0, 52}, + {7, 0, 6, 0, 53}, {7, 0, 5, 0, 61}, - {7, 0, 5, 0, 59}, - {7, 0, 5, 0, 57}, + {7, 0, 5, 0, 60}, + {7, 0, 5, 0, 58}, {7, 0, 5, 0, 56}, - {7, 0, 5, 0, 54}, + {7, 0, 5, 0, 55}, {7, 0, 5, 0, 53}, - {7, 0, 5, 0, 51}, - {7, 0, 4, 0, 62}, - {7, 0, 4, 0, 60}, - {7, 0, 4, 0, 58}, + {7, 0, 5, 0, 52}, + {7, 0, 5, 0, 50}, + {7, 0, 5, 0, 49}, + {7, 0, 5, 0, 47}, {7, 0, 4, 0, 57}, - {7, 0, 4, 0, 55}, + {7, 0, 4, 0, 56}, {7, 0, 4, 0, 54}, - {7, 0, 4, 0, 52}, + {7, 0, 4, 0, 53}, {7, 0, 4, 0, 51}, - {7, 0, 4, 0, 49}, + {7, 0, 4, 0, 50}, {7, 0, 4, 0, 48}, + {7, 0, 4, 0, 47}, {7, 0, 4, 0, 46}, - {7, 0, 3, 0, 60}, - {7, 0, 3, 0, 58}, - {7, 0, 3, 0, 57}, - {7, 0, 3, 0, 55}, - {7, 0, 3, 0, 54}, - {7, 0, 3, 0, 52}, + {7, 0, 4, 0, 44}, + {7, 0, 4, 0, 43}, + {7, 0, 4, 0, 42}, + {7, 0, 4, 0, 41}, + {7, 0, 4, 0, 40}, {7, 0, 3, 0, 51}, - {7, 0, 3, 0, 49}, + {7, 0, 3, 0, 50}, {7, 0, 3, 0, 48}, + {7, 0, 3, 0, 47}, {7, 0, 3, 0, 46}, - {7, 0, 3, 0, 45}, {7, 0, 3, 0, 44}, {7, 0, 3, 0, 43}, + {7, 0, 3, 0, 42}, {7, 0, 3, 0, 41}, - {7, 0, 2, 0, 61}, - {7, 0, 2, 0, 59}, - {7, 0, 2, 0, 57}, - {7, 0, 2, 0, 56}, - {7, 0, 2, 0, 54}, - {7, 0, 2, 0, 53}, - {7, 0, 2, 0, 51}, - {7, 0, 2, 0, 50}, - {7, 0, 2, 0, 48}, - {7, 0, 2, 0, 47}, - {7, 0, 2, 0, 46}, - {7, 0, 2, 0, 44}, - {7, 0, 2, 0, 43}, - {7, 0, 2, 0, 42}, - {7, 0, 2, 0, 41}, - {7, 0, 2, 0, 39}, - {7, 0, 2, 0, 38}, - {7, 0, 2, 0, 37}, - {7, 0, 2, 0, 36}, - {7, 0, 2, 0, 35}, - {7, 0, 2, 0, 34}, - {7, 0, 2, 0, 33}, - {7, 0, 2, 0, 32}, - {7, 0, 1, 0, 63}, - {7, 0, 1, 0, 61}, - {7, 0, 1, 0, 59}, - {7, 0, 1, 0, 57}, + {3, 0, 3, 0, 56}, + {3, 0, 3, 0, 54}, + {3, 0, 3, 0, 53}, + {3, 0, 3, 0, 51}, + {3, 0, 3, 0, 50}, + {3, 0, 3, 0, 48}, + {3, 0, 3, 0, 47}, + {3, 0, 3, 0, 46}, + {3, 0, 3, 0, 44}, + {3, 0, 3, 0, 43}, + {3, 0, 3, 0, 42}, + {3, 0, 3, 0, 41}, + {3, 0, 3, 0, 39}, + {3, 0, 3, 0, 38}, + {3, 0, 3, 0, 37}, + {3, 0, 3, 0, 36}, + {3, 0, 3, 0, 35}, + {3, 0, 3, 0, 34}, }; const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_5GHz_gaintable_rev0[128] = { -- cgit v0.10.2 From 7de646854bb1405ccafaa5e3545df6657141f510 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:40 +0200 Subject: brcmsmac: change lcnphy receive i/q calibration routine The gain level control for the test tone has been changed. This calbration test tone is used to determine the i/q compensation. The i/q calibration routine has been reworked to accomodate this. Cc: Jonas Gorski Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 8dc5d0f..236e8d9 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -1329,6 +1329,43 @@ static u32 wlc_lcnphy_measure_digital_power(struct brcms_phy *pi, u16 nsamples) return (iq_est.i_pwr + iq_est.q_pwr) / nsamples; } +static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain, + u16 tia_gain, u16 lna2_gain) +{ + u32 i_thresh_l, q_thresh_l; + u32 i_thresh_h, q_thresh_h; + struct lcnphy_iq_est iq_est_h, iq_est_l; + + wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain, + lna2_gain, 0); + + wlc_lcnphy_rx_gain_override_enable(pi, true); + wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0); + udelay(500); + write_radio_reg(pi, RADIO_2064_REG112, 0); + if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l)) + return false; + + wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0); + udelay(500); + write_radio_reg(pi, RADIO_2064_REG112, 0); + if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h)) + return false; + + i_thresh_l = (iq_est_l.i_pwr << 1); + i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr; + + q_thresh_l = (iq_est_l.q_pwr << 1); + q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr; + if ((iq_est_h.i_pwr > i_thresh_l) && + (iq_est_h.i_pwr < i_thresh_h) && + (iq_est_h.q_pwr > q_thresh_l) && + (iq_est_h.q_pwr < q_thresh_h)) + return true; + + return false; +} + static bool wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, const struct lcnphy_rx_iqcomp *iqcomp, @@ -1343,8 +1380,8 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old, rfoverride3_old, rfoverride3val_old, rfoverride4_old, rfoverride4val_old, afectrlovr_old, afectrlovrval_old; - int tia_gain; - u32 received_power, rx_pwr_threshold; + int tia_gain, lna2_gain, biq1_gain; + bool set_gain; u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl; u16 values_to_save[11]; s16 *ptr; @@ -1432,29 +1469,30 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi, mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0); mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0); - wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0); write_phy_reg(pi, 0x6da, 0xffff); or_phy_reg(pi, 0x6db, 0x3); - wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); - wlc_lcnphy_rx_gain_override_enable(pi, true); - - tia_gain = 8; - rx_pwr_threshold = 950; - while (tia_gain > 0) { - tia_gain -= 1; - wlc_lcnphy_set_rx_gain_by_distribution(pi, - 0, 0, 2, 2, - (u16) - tia_gain, 1, 0); - udelay(500); - received_power = - wlc_lcnphy_measure_digital_power(pi, 2000); - if (received_power < rx_pwr_threshold) - break; + wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch); + for (lna2_gain = 3; lna2_gain >= 0; lna2_gain--) { + for (tia_gain = 4; tia_gain >= 0; tia_gain--) { + for (biq1_gain = 6; biq1_gain >= 0; biq1_gain--) { + set_gain = wlc_lcnphy_rx_iq_cal_gain(pi, + (u16) + biq1_gain, + (u16) + tia_gain, + (u16) + lna2_gain); + if (!set_gain) + continue; + + result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024); + goto stop_tone; + } + } } - result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff); +stop_tone: wlc_lcnphy_stop_tx_tone(pi); write_phy_reg(pi, 0x631, Core1TxControl_old); -- cgit v0.10.2 From d50ec00160b1842d492c8b871bcd16301454cdcf Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:41 +0200 Subject: brcmsmac: fix TSSI idle estimation The baseband multiplier must be zero during TSSI idle estimation and restored afterwards. Reviewed-by: Pieter-Paul Giesberts Tested-by: David Herrmann Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 236e8d9..e08b73a 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -2836,6 +2836,8 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) read_radio_reg(pi, RADIO_2064_REG007) & 1; u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10; u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4; + u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi); + idleTssi = read_phy_reg(pi, 0x4ab); suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) & MCTL_EN_MAC)); @@ -2853,6 +2855,12 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4); mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2); wlc_lcnphy_tssi_setup(pi); + + mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0)); + mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6)); + + wlc_lcnphy_set_bbmult(pi, 0x0); + wlc_phy_do_dummy_tx(pi, true, OFF); idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0)) >> 0); @@ -2874,6 +2882,7 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi) mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12); + wlc_lcnphy_set_bbmult(pi, SAVE_bbmult); wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old); wlc_lcnphy_set_tx_gain(pi, &old_gains); wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl); -- cgit v0.10.2 From 3e72ef73c3414be5932ac75d0938747fb232d4ae Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:42 +0200 Subject: brcmsmac: avoid calling set_txpwr_by_index() twice For lcnphy revision 1 or when hardware supports i/q calibration the function wlc_lcnphy_set_txpwr_by_index() was called twice. Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index e08b73a..caced82 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -3897,7 +3897,6 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi) target_gains.pad_gain = 21; target_gains.dac_gain = 0; wlc_lcnphy_set_tx_gain(pi, &target_gains); - wlc_lcnphy_set_tx_pwr_by_index(pi, 16); if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) { @@ -3908,6 +3907,7 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi) lcnphy_recal ? LCNPHY_CAL_RECAL : LCNPHY_CAL_FULL), false); } else { + wlc_lcnphy_set_tx_pwr_by_index(pi, 16); wlc_lcnphy_tx_iqlo_soft_cal_full(pi); } -- cgit v0.10.2 From 02fcc7535e92031695c50eb518e56ea09fd3c6e2 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:43 +0200 Subject: brcmsmac: rework switch control table init including iPA BT-combo Rework the code path in lcnphy tbl_init() for switch control table programming. This also takes the iPA BT-combo card into account. Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index caced82..08bcae4 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -4573,6 +4573,7 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi) uint idx; u8 phybw40; struct phytbl_info tab; + const struct phytbl_info *tb; u32 val; phybw40 = CHSPEC_IS40(pi->radio_chanspec); @@ -4619,7 +4620,6 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi) } if (LCNREV_IS(pi->pubpi.phy_rev, 2)) { - const struct phytbl_info *tb; int l; if (CHSPEC_IS2G(pi->radio_chanspec)) { @@ -4640,21 +4640,22 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi) wlc_lcnphy_write_table(pi, &tb[idx]); } - if ((pi->sh->boardflags & BFL_FEM) - && !(pi->sh->boardflags & BFL_FEM_BT)) - wlc_lcnphy_write_table(pi, &dot11lcn_sw_ctrl_tbl_info_4313_epa); - else if (pi->sh->boardflags & BFL_FEM_BT) { - if (pi->sh->boardrev < 0x1250) - wlc_lcnphy_write_table( - pi, - &dot11lcn_sw_ctrl_tbl_info_4313_bt_epa); + if (pi->sh->boardflags & BFL_FEM) { + if (pi->sh->boardflags & BFL_FEM_BT) { + if (pi->sh->boardrev < 0x1250) + tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_epa; + else + tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250; + } else { + tb = &dot11lcn_sw_ctrl_tbl_info_4313_epa; + } + } else { + if (pi->sh->boardflags & BFL_FEM_BT) + tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa; else - wlc_lcnphy_write_table( - pi, - &dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250); - } else - wlc_lcnphy_write_table(pi, &dot11lcn_sw_ctrl_tbl_info_4313); - + tb = &dot11lcn_sw_ctrl_tbl_info_4313; + } + wlc_lcnphy_write_table(pi, tb); wlc_lcnphy_load_rfpower(pi); wlc_lcnphy_clear_papd_comptable(pi); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c index efd5a58..d7fa312 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c @@ -2044,6 +2044,73 @@ static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = { 0x0005, }; +static const u16 dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo[] = { + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, + 0x0005, + 0x0006, + 0x0009, + 0x000a, +}; + static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = { 0x0004, 0x0004, @@ -2808,6 +2875,11 @@ const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313 = { ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_rev0), 15, 0, 16 }; +const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa = { + &dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo, + ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo), 15, 0, 16 +}; + const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa = { &dot11lcn_sw_ctrl_tbl_4313_epa_rev0, ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_epa_rev0), 15, 0, 16 diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h index 5f75e16..489422a 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h @@ -20,6 +20,7 @@ extern const struct phytbl_info dot11lcnphytbl_rx_gain_info_rev0[]; extern const u32 dot11lcnphytbl_rx_gain_info_sz_rev0; extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313; +extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa; extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa; extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa_combo; extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa; -- cgit v0.10.2 From 118e545a2cf34c8a660d050a72d8e711850f8f93 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:44 +0200 Subject: brcmsmac: correct phy registers for TSSI-based power control A number of additional phy registers needs to be programmed when using TSSI-based power control. Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 08bcae4..2917f5c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -2020,6 +2020,16 @@ wlc_lcnphy_set_tssi_mux(struct brcms_phy *pi, enum lcnphy_tssi_mode pos) } else { mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1); mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8); + mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0); + mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2); + mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0); + mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4); + mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0); + mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77); + mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1); + mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7); + mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1); + mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4); } } else { mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2); @@ -2106,6 +2116,7 @@ static void wlc_lcnphy_pwrctrl_rssiparams(struct brcms_phy *pi) (auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12)); mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5)); + mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0)); } static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) @@ -2218,6 +2229,10 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8); + mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0); + mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0); + mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8); + wlc_lcnphy_pwrctrl_rssiparams(pi); } @@ -3096,6 +3111,11 @@ static void wlc_lcnphy_tx_pwr_ctrl_init(struct brcms_phy_pub *ppi) wlc_lcnphy_write_table(pi, &tab); tab.tbl_offset++; } + mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0); + mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0); + mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8); + mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4); + mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2); mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7); -- cgit v0.10.2 From d37c8f0826becb82be0ea06b074f775fb4f75730 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 20 Aug 2013 16:00:45 +0200 Subject: brcmsmac: reinitialize TSSI power control upon channel switch When changing channels the TSSI based power control needs to be reinitialized. Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 2917f5c..8fb1048 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -5019,6 +5019,8 @@ void wlc_phy_chanspec_set_lcnphy(struct brcms_phy *pi, u16 chanspec) wlc_lcnphy_load_tx_iir_filter(pi, true, 3); mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3); + if (wlc_lcnphy_tssi_based_pwr_ctrl_enabled(pi)) + wlc_lcnphy_tssi_setup(pi); } void wlc_phy_detach_lcnphy(struct brcms_phy *pi) -- cgit v0.10.2 From 20c7d42a5005938ea6734ee0463f2031d843878f Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 21 Aug 2013 11:45:47 +0200 Subject: brcmsmac: add support for BCM4313 iPA variant This patch completes the changes needed for supporting the iPA variant cards of the BCM4313 wireless chipset. Tested-by: David Herrmann Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 8fb1048..b2d6d6d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -1826,6 +1826,19 @@ wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel) write_radio_reg(pi, RADIO_2064_REG038, 3); write_radio_reg(pi, RADIO_2064_REG091, 7); } + + if (!(pi->sh->boardflags & BFL_FEM)) { + static const u8 reg038[14] = { + 0xd, 0xe, 0xd, 0xd, 0xd, 0xc, 0xa, + 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0 + }; + + write_radio_reg(pi, RADIO_2064_REG02A, 0xf); + write_radio_reg(pi, RADIO_2064_REG091, 0x3); + write_radio_reg(pi, RADIO_2064_REG038, 0x3); + + write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]); + } } static int @@ -2123,7 +2136,16 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) { struct phytbl_info tab; u32 rfseq, ind; + enum lcnphy_tssi_mode mode; + u8 tssi_sel; + if (pi->sh->boardflags & BFL_FEM) { + tssi_sel = 0x1; + mode = LCNPHY_TSSI_EXT; + } else { + tssi_sel = 0xe; + mode = LCNPHY_TSSI_POST_PA; + } tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL; tab.tbl_width = 32; tab.tbl_ptr = &ind; @@ -2144,7 +2166,7 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4); - wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT); + wlc_lcnphy_set_tssi_mux(pi, mode); mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14); mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15); @@ -2180,9 +2202,10 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi) mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0); if (LCNREV_IS(pi->pubpi.phy_rev, 2)) { - mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe); + mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel); mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4); } else { + mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1); mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1); mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3); } @@ -4358,8 +4381,11 @@ wlc_lcnphy_load_tx_gain_table(struct brcms_phy *pi, tab.tbl_len = 1; tab.tbl_ptr = &val; + /* fixed gm_gain value for iPA */ + gm_gain = 15; for (j = 0; j < 128; j++) { - gm_gain = gain_table[j].gm; + if (pi->sh->boardflags & BFL_FEM) + gm_gain = gain_table[j].gm; val = (((u32) pa_gain << 24) | (gain_table[j].pad << 16) | (gain_table[j].pga << 8) | gm_gain); @@ -4570,7 +4596,10 @@ static void wlc_radio_2064_init(struct brcms_phy *pi) write_phy_reg(pi, 0x4ea, 0x4688); - mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0); + if (pi->sh->boardflags & BFL_FEM) + mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0); + else + mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0); mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6); @@ -4581,6 +4610,13 @@ static void wlc_radio_2064_init(struct brcms_phy *pi) wlc_lcnphy_rcal(pi); wlc_lcnphy_rc_cal(pi); + + if (!(pi->sh->boardflags & BFL_FEM)) { + write_radio_reg(pi, RADIO_2064_REG032, 0x6f); + write_radio_reg(pi, RADIO_2064_REG033, 0x19); + write_radio_reg(pi, RADIO_2064_REG039, 0xe); + } + } static void wlc_lcnphy_radio_init(struct brcms_phy *pi) @@ -4611,22 +4647,20 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi) wlc_lcnphy_write_table(pi, &tab); } - tab.tbl_id = LCNPHY_TBL_ID_RFSEQ; - tab.tbl_width = 16; - tab.tbl_ptr = &val; - tab.tbl_len = 1; - - val = 114; - tab.tbl_offset = 0; - wlc_lcnphy_write_table(pi, &tab); + if (!(pi->sh->boardflags & BFL_FEM)) { + tab.tbl_id = LCNPHY_TBL_ID_RFSEQ; + tab.tbl_width = 16; + tab.tbl_ptr = &val; + tab.tbl_len = 1; - val = 130; - tab.tbl_offset = 1; - wlc_lcnphy_write_table(pi, &tab); + val = 150; + tab.tbl_offset = 0; + wlc_lcnphy_write_table(pi, &tab); - val = 6; - tab.tbl_offset = 8; - wlc_lcnphy_write_table(pi, &tab); + val = 220; + tab.tbl_offset = 1; + wlc_lcnphy_write_table(pi, &tab); + } if (CHSPEC_IS2G(pi->radio_chanspec)) { if (pi->sh->boardflags & BFL_FEM) @@ -5059,8 +5093,7 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi) if (!wlc_phy_txpwr_srom_read_lcnphy(pi)) return false; - if ((pi->sh->boardflags & BFL_FEM) && - (LCNREV_IS(pi->pubpi.phy_rev, 1))) { + if (LCNREV_IS(pi->pubpi.phy_rev, 1)) { if (pi_lcn->lcnphy_tempsense_option == 3) { pi->hwpwrctrl = true; pi->hwpwrctrl_capable = true; -- cgit v0.10.2 From 1fb9026000e66ffe032b11ec724c1bc7d068198e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 21 Aug 2013 11:24:01 +0200 Subject: mac80211: move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into drivers mac80211 currently sets WIPHY_FLAG_SUPPORTS_SCHED_SCAN based on whether the start_sched_scan operation is supported or not, but that will not be correct for all drivers, we're adding scheduled scan to the iwlmvm driver but it depends on firmware support. Therefore, move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into the drivers so that they can control it regardless of implementing the operation. This currently only affects the TI drivers since they're the only ones implementing scheduled scan (in a mac80211 driver.) Acked-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index d1b19c3..38995f9 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5623,7 +5623,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) wl->hw->wiphy->max_remain_on_channel_duration = 5000; wl->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD | - WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL | + WIPHY_FLAG_SUPPORTS_SCHED_SCAN; /* make sure all our channels fit in the scanned_ch bitmask */ BUILD_BUG_ON(ARRAY_SIZE(wl1271_channels) + diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 25eb35b..21d5d44 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -892,9 +892,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (!local->ops->remain_on_channel) local->hw.wiphy->max_remain_on_channel_duration = 5000; - if (local->ops->sched_scan_start) - local->hw.wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; - /* mac80211 based drivers don't support internal TDLS setup */ if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP; -- cgit v0.10.2 From a4ef66a915b957416a89a48365aea2ec2dc551f6 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 22 Aug 2013 10:28:58 -0700 Subject: mac80211: only respond to probe request with mesh ID Previously, the mesh STA responds to probe request from legacy STA but now it will only respond to legacy STA if the legacy STA does include the specific mesh ID or wildcard mesh ID in the probe request. The iw patch "iw: scan using meshid" can be used either by legacy STA or by mesh STA to do active scanning by inserting the mesh ID in the probe request frame. Signed-off-by: Chun-Yeow Yeoh Acked-by: Thomas Pedersen Acked-by: Javier Cardona Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 885a5f6..707ac61 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -832,6 +832,9 @@ ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(pos, len - baselen, false, &elems); + if (!elems.mesh_id) + return; + /* 802.11-2012 10.1.4.3.2 */ if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && !is_broadcast_ether_addr(mgmt->da)) || -- cgit v0.10.2 From c4c205f3cd17b567b8e20098522416eac2e73960 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 23 Aug 2013 09:35:38 -0400 Subject: mac80211: assign seqnums for group QoS frames According to 802.11-2012 9.3.2.10, paragraph 4, QoS data frames with a group address in the Address 1 field have sequence numbers allocated from the same counter as non-QoS data and management frames. Without this flag, some drivers may not assign sequence numbers, and in rare cases frames might get dropped. Set the control flag accordingly. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 098ae85..3456c04 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -781,9 +781,11 @@ ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx) /* * Anything but QoS data that has a sequence number field * (is long enough) gets a sequence number from the global - * counter. + * counter. QoS data frames with a multicast destination + * also use the global counter (802.11-2012 9.3.2.10). */ - if (!ieee80211_is_data_qos(hdr->frame_control)) { + if (!ieee80211_is_data_qos(hdr->frame_control) || + is_multicast_ether_addr(hdr->addr1)) { /* driver should assign sequence number */ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; /* for pure STA mode without beacons, we can do it */ -- cgit v0.10.2 From 19504cf5f35fbe85db811fce9f4392a0cbdada2f Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Thu, 15 Aug 2013 14:51:28 +0300 Subject: cfg80211: add flags to cfg80211_rx_mgmt() Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: Vladimir Kondratiev [REPLIED->ANSWERED, reword commit message] Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 87aefb4..546d5da 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -568,8 +568,8 @@ static int ath6kl_wmi_rx_probe_req_event_rx(struct wmi *wmi, u8 *datap, int len, dlen, freq, vif->probe_req_report); if (vif->probe_req_report || vif->nw_type == AP_NETWORK) - cfg80211_rx_mgmt(&vif->wdev, freq, 0, - ev->data, dlen, GFP_ATOMIC); + cfg80211_rx_mgmt(&vif->wdev, freq, 0, ev->data, dlen, 0, + GFP_ATOMIC); return 0; } @@ -608,8 +608,7 @@ static int ath6kl_wmi_rx_action_event_rx(struct wmi *wmi, u8 *datap, int len, return -EINVAL; } ath6kl_dbg(ATH6KL_DBG_WMI, "rx_action: len=%u freq=%u\n", dlen, freq); - cfg80211_rx_mgmt(&vif->wdev, freq, 0, - ev->data, dlen, GFP_ATOMIC); + cfg80211_rx_mgmt(&vif->wdev, freq, 0, ev->data, dlen, 0, GFP_ATOMIC); return 0; } diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index dc8059a..21c791e 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -339,7 +339,7 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) } } else { cfg80211_rx_mgmt(wil->wdev, freq, signal, - (void *)rx_mgmt_frame, d_len, GFP_KERNEL); + (void *)rx_mgmt_frame, d_len, 0, GFP_KERNEL); } } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 79555f0..d7a9745 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1430,7 +1430,7 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, IEEE80211_BAND_5GHZ); wdev = &ifp->vif->wdev; - cfg80211_rx_mgmt(wdev, freq, 0, (u8 *)mgmt_frame, mgmt_frame_len, + cfg80211_rx_mgmt(wdev, freq, 0, (u8 *)mgmt_frame, mgmt_frame_len, 0, GFP_ATOMIC); kfree(mgmt_frame); @@ -1895,7 +1895,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ); - cfg80211_rx_mgmt(&vif->wdev, freq, 0, mgmt_frame, mgmt_frame_len, + cfg80211_rx_mgmt(&vif->wdev, freq, 0, mgmt_frame, mgmt_frame_len, 0, GFP_ATOMIC); brcmf_dbg(INFO, "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n", diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c index e57ac0d..5d9e150 100644 --- a/drivers/net/wireless/mwifiex/util.c +++ b/drivers/net/wireless/mwifiex/util.c @@ -171,8 +171,8 @@ mwifiex_process_mgmt_packet(struct mwifiex_private *priv, rx_pd->rx_pkt_length = cpu_to_le16(pkt_len); cfg80211_rx_mgmt(priv->wdev, priv->roc_cfg.chan.center_freq, - CAL_RSSI(rx_pd->snr, rx_pd->nf), - skb->data, pkt_len, GFP_ATOMIC); + CAL_RSSI(rx_pd->snr, rx_pd->nf), skb->data, pkt_len, + 0, GFP_ATOMIC); return 0; } diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 9ab7a06..d530c54 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -4056,6 +4056,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * @sig_dbm: signal strength in mBm, or 0 if unknown * @buf: Management frame (header + body) * @len: length of the frame data + * @flags: flags, as defined in enum nl80211_rxmgmt_flags * @gfp: context flags * * This function is called whenever an Action frame is received for a station @@ -4067,7 +4068,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * driver is responsible for rejecting the frame. */ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, - const u8 *buf, size_t len, gfp_t gfp); + const u8 *buf, size_t len, u32 flags, gfp_t gfp); /** * cfg80211_mgmt_tx_status - notification of TX status for management frame diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1f42bc3..fde2c02 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1493,6 +1493,9 @@ enum nl80211_commands { * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter * field in the probe response (%NL80211_ATTR_PROBE_RESP). * + * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. + * As specified in the &enum nl80211_rxmgmt_flags. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1801,6 +1804,8 @@ enum nl80211_attrs { NL80211_ATTR_CSA_C_OFF_BEACON, NL80211_ATTR_CSA_C_OFF_PRESP, + NL80211_ATTR_RXMGMT_FLAGS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3901,4 +3906,15 @@ enum nl80211_crit_proto_id { /* maximum duration for critical protocol measures */ #define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ +/** + * enum nl80211_rxmgmt_flags - flags for received management frame. + * + * Used by cfg80211_rx_mgmt() + * + * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. + */ +enum nl80211_rxmgmt_flags { + NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index ffad155..0790105 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2678,8 +2678,7 @@ ieee80211_rx_h_userspace_mgmt(struct ieee80211_rx_data *rx) sig = status->signal; if (cfg80211_rx_mgmt(&rx->sdata->wdev, status->freq, sig, - rx->skb->data, rx->skb->len, - GFP_ATOMIC)) { + rx->skb->data, rx->skb->len, 0, GFP_ATOMIC)) { if (rx->sta) rx->sta->rx_packets++; dev_kfree_skb(rx->skb); diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index bfac5e1..8d49c1c 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -621,7 +621,7 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev, } bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_mbm, - const u8 *buf, size_t len, gfp_t gfp) + const u8 *buf, size_t len, u32 flags, gfp_t gfp) { struct wiphy *wiphy = wdev->wiphy; struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); @@ -664,7 +664,7 @@ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_mbm, /* Indicate the received Action frame to user space */ if (nl80211_send_mgmt(rdev, wdev, reg->nlportid, freq, sig_mbm, - buf, len, gfp)) + buf, len, flags, gfp)) continue; result = true; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 334697d..a51269d 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -10446,7 +10446,7 @@ EXPORT_SYMBOL(cfg80211_rx_unexpected_4addr_frame); int nl80211_send_mgmt(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, u32 nlportid, int freq, int sig_dbm, - const u8 *buf, size_t len, gfp_t gfp) + const u8 *buf, size_t len, u32 flags, gfp_t gfp) { struct net_device *netdev = wdev->netdev; struct sk_buff *msg; @@ -10469,7 +10469,9 @@ int nl80211_send_mgmt(struct cfg80211_registered_device *rdev, nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq) || (sig_dbm && nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) || - nla_put(msg, NL80211_ATTR_FRAME, len, buf)) + nla_put(msg, NL80211_ATTR_FRAME, len, buf) || + (flags && + nla_put_u32(msg, NL80211_ATTR_RXMGMT_FLAGS, flags))) goto nla_put_failure; genlmsg_end(msg, hdr); diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h index 44341bf..2c0f2b3 100644 --- a/net/wireless/nl80211.h +++ b/net/wireless/nl80211.h @@ -66,7 +66,7 @@ void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev, int nl80211_send_mgmt(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, u32 nlpid, int freq, int sig_dbm, - const u8 *buf, size_t len, gfp_t gfp); + const u8 *buf, size_t len, u32 flags, gfp_t gfp); void nl80211_radar_notify(struct cfg80211_registered_device *rdev, -- cgit v0.10.2 From d70b7616d9080ec9f868fbd31db5fd4341435d61 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 23 Aug 2013 15:48:48 +0200 Subject: mac80211: ignore (E)CSA in probe response frames Seth reports that some APs, notably the Netgear WNDAP360, send invalid ECSA IEs in probe response frames with the operating class and channel number both set to zero, even when no channel switch is being done. As a result, any scan while connected to such an AP results in the connection being dropped. Fix this by ignoring any channel switch announcment in probe response frames entirely, since we're connected to the AP we will be receiving a beacon (and maybe even an action frame) if a channel switch is done, which is sufficient. Cc: stable@vger.kernel.org # 3.10 Reported-by: Seth Forshee Tested-by: Seth Forshee Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index cc9e02d..7a98d52 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2851,14 +2851,6 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, ieee80211_rx_bss_put(local, bss); sdata->vif.bss_conf.beacon_rate = bss->beacon_rate; } - - if (!sdata->u.mgd.associated || - !ether_addr_equal(mgmt->bssid, sdata->u.mgd.associated->bssid)) - return; - - ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, - elems, true); - } @@ -3147,6 +3139,9 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); + ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, + &elems, true); + if (ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, elems.wmm_param_len)) changed |= BSS_CHANGED_QOS; -- cgit v0.10.2 From bcdd822007e44b1da1ad5a62f20b75ee7d8da608 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 26 Aug 2013 15:32:58 +0800 Subject: mac80211_hwsim: fix error return code in init_mac80211_hwsim() Fix to return -ENOMEM in the netdev alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index a0d2aac..2cd3f54 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2528,8 +2528,10 @@ static int __init init_mac80211_hwsim(void) } hwsim_mon = alloc_netdev(0, "hwsim%d", hwsim_mon_setup); - if (hwsim_mon == NULL) + if (hwsim_mon == NULL) { + err = -ENOMEM; goto failed; + } rtnl_lock(); -- cgit v0.10.2 From a98655387762394371b88cdfb8215884757978ab Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 26 Aug 2013 09:30:32 +0200 Subject: mac80211: fix change_interface queue assignments Jouni reported that with mac80211_hwsim, multicast TX was causing crashes due to invalid vif->cab_queue assignment. It turns out that this is caused by change_interface() getting invoked and not having the vif->type/vif->p2p assigned correctly before calling the queue check (ieee80211_check_queues). Fix this by passing the 'external' interface type to the function and adjusting it accordingly. While at it, also fix the error path in change_interface, it wasn't correctly resetting to the external type but using the internal one instead. Fortunately this affects on hwsim because all other drivers set the vif->type/vif->p2p variables when changing iftype. This shouldn't be needed, but almost all implementations actually do it for their own internal handling. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 7ca534b..fcecd63 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -308,12 +308,13 @@ static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata, return 0; } -static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata) +static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata, + enum nl80211_iftype iftype) { int n_queues = sdata->local->hw.queues; int i; - if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) { + if (iftype != NL80211_IFTYPE_P2P_DEVICE) { for (i = 0; i < IEEE80211_NUM_ACS; i++) { if (WARN_ON_ONCE(sdata->vif.hw_queue[i] == IEEE80211_INVAL_HW_QUEUE)) @@ -324,8 +325,9 @@ static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata) } } - if ((sdata->vif.type != NL80211_IFTYPE_AP && - sdata->vif.type != NL80211_IFTYPE_MESH_POINT) || + if ((iftype != NL80211_IFTYPE_AP && + iftype != NL80211_IFTYPE_P2P_GO && + iftype != NL80211_IFTYPE_MESH_POINT) || !(sdata->local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)) { sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE; return 0; @@ -408,7 +410,7 @@ int ieee80211_add_virtual_monitor(struct ieee80211_local *local) return ret; } - ret = ieee80211_check_queues(sdata); + ret = ieee80211_check_queues(sdata, NL80211_IFTYPE_MONITOR); if (ret) { kfree(sdata); return ret; @@ -592,7 +594,8 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) res = drv_add_interface(local, sdata); if (res) goto err_stop; - res = ieee80211_check_queues(sdata); + res = ieee80211_check_queues(sdata, + ieee80211_vif_type_p2p(&sdata->vif)); if (res) goto err_del_interface; } @@ -1389,14 +1392,14 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, ret = drv_change_interface(local, sdata, internal_type, p2p); if (ret) - type = sdata->vif.type; + type = ieee80211_vif_type_p2p(&sdata->vif); /* * Ignore return value here, there's not much we can do since * the driver changed the interface type internally already. * The warnings will hopefully make driver authors fix it :-) */ - ieee80211_check_queues(sdata); + ieee80211_check_queues(sdata, type); ieee80211_setup_sdata(sdata, type); -- cgit v0.10.2 From 21c6af6b69b609b7934caaccda1b4535dceb402c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 22 Aug 2013 20:53:21 +0200 Subject: rt2x00: rt2800lib: add rt2800_hw_beacon_base helper The HW_BEACON_BASE() macro returns the base address of a given beacon, however the returned values are not usable on all chipsets. On devices which have selectable shared memory parts, some beacon may be located in the high part of the shared memory. Instead of extending the already complicated macro, add a new helper function and use that to get the base address of a given beacon. The actual patch contains no functional changes, the helper function will be extended in a further patch to handle different chipsets' requirements. Signed-off-by: Gabor Juhos Acked-by: Helmut Schaa Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index aa6b6b0..38606e2 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -940,6 +940,12 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi) } EXPORT_SYMBOL_GPL(rt2800_txdone_entry); +static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev, + unsigned int index) +{ + return HW_BEACON_BASE(index); +} + void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; @@ -992,7 +998,8 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) return; } - beacon_base = HW_BEACON_BASE(entry->entry_idx); + beacon_base = rt2800_hw_beacon_base(rt2x00dev, entry->entry_idx); + rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data, entry->skb->len + padding_len); @@ -1017,7 +1024,7 @@ static inline void rt2800_clear_beacon_register(struct rt2x00_dev *rt2x00dev, const int txwi_desc_size = rt2x00dev->bcn->winfo_size; unsigned int beacon_base; - beacon_base = HW_BEACON_BASE(index); + beacon_base = rt2800_hw_beacon_base(rt2x00dev, index); /* * For the Beacon base registers we only need to clear -- cgit v0.10.2 From 634b80595fef79071d82bc231b7f82c4f808a1e8 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 22 Aug 2013 20:53:22 +0200 Subject: rt2x00: rt2800lib: don't hardcode beacon offsets The values written into the BCN_OFFSET[01] registers are hardcoded in the rt2800_init_register function. Add a macro and a helper function to derive these values directly from the base address of a given beacon, and use the new function instead of the hardcoded numbers. The patch contains no functional changes. The programmed register values are the same before and after the patch. Signed-off-by: Gabor Juhos Acked-by: Helmut Schaa Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index e25e5bf..fa33b5e 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -2024,6 +2024,8 @@ struct mac_iveiv_entry { (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200)))) +#define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64) + /* * BBP registers. * The wordsize of the BBP is 8 bits. diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 38606e2..20243dc 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -946,6 +946,12 @@ static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev, return HW_BEACON_BASE(index); } +static inline u8 rt2800_get_beacon_offset(struct rt2x00_dev *rt2x00dev, + unsigned int index) +{ + return BEACON_BASE_TO_OFFSET(rt2800_hw_beacon_base(rt2x00dev, index)); +} + void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; @@ -4474,17 +4480,25 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) return ret; rt2800_register_read(rt2x00dev, BCN_OFFSET0, ®); - rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN0, + rt2800_get_beacon_offset(rt2x00dev, 0)); + rt2x00_set_field32(®, BCN_OFFSET0_BCN1, + rt2800_get_beacon_offset(rt2x00dev, 1)); + rt2x00_set_field32(®, BCN_OFFSET0_BCN2, + rt2800_get_beacon_offset(rt2x00dev, 2)); + rt2x00_set_field32(®, BCN_OFFSET0_BCN3, + rt2800_get_beacon_offset(rt2x00dev, 3)); rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg); rt2800_register_read(rt2x00dev, BCN_OFFSET1, ®); - rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN4, + rt2800_get_beacon_offset(rt2x00dev, 4)); + rt2x00_set_field32(®, BCN_OFFSET1_BCN5, + rt2800_get_beacon_offset(rt2x00dev, 5)); + rt2x00_set_field32(®, BCN_OFFSET1_BCN6, + rt2800_get_beacon_offset(rt2x00dev, 6)); + rt2x00_set_field32(®, BCN_OFFSET1_BCN7, + rt2800_get_beacon_offset(rt2x00dev, 7)); rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg); rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); -- cgit v0.10.2 From f4a83e578e0011ddcfdbe1c62d0916dadb4802aa Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 23 Aug 2013 23:22:29 +0200 Subject: bcma: change max PCI read request size to 128 This PCIe controller does not support a max read request size above 128 bytes. The sold card I tested this controller with used 128 as default value, but some new routers are sold with BCM4331 chips, which have a default max read request size of 512. This device fails at the first DMA reqeust whch is bigger than 126 bytes. This patch changes the max read request size to 128 for every device on the PCIe link. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index 30629a3..c3d7b03 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -581,6 +581,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); int bcma_core_pci_plat_dev_init(struct pci_dev *dev) { struct bcma_drv_pci_host *pc_host; + int readrq; if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { /* This is not a device on the PCI-core bridge. */ @@ -595,6 +596,11 @@ int bcma_core_pci_plat_dev_init(struct pci_dev *dev) dev->irq = bcma_core_irq(pc_host->pdev->core); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + readrq = pcie_get_readrq(dev); + if (readrq > 128) { + pr_info("change PCIe max read request size from %i to 128\n", readrq); + pcie_set_readrq(dev, 128); + } return 0; } EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); -- cgit v0.10.2 From cfe51ec1ae427ec0be5a7670eae815ce5eb30e1c Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 24 Aug 2013 00:32:30 +0200 Subject: bcma: add method to power up and down the PCIe core by wifi driver The wifi driver should tell the PCIe core that it is now in operation so that some workarounds can be applied and the power state is changed. This should replace the call to bcma_core_pci_extend_L1timer by the brcmsmac driver. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index cf7a476..6ea817f 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -275,3 +275,29 @@ void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); } EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); + +void bcma_core_pci_up(struct bcma_bus *bus) +{ + struct bcma_drv_pci *pc; + + if (bus->hosttype != BCMA_HOSTTYPE_PCI) + return; + + pc = &bus->drv_pci[0]; + + bcma_core_pci_extend_L1timer(pc, true); +} +EXPORT_SYMBOL_GPL(bcma_core_pci_up); + +void bcma_core_pci_down(struct bcma_bus *bus) +{ + struct bcma_drv_pci *pc; + + if (bus->hosttype != BCMA_HOSTTYPE_PCI) + return; + + pc = &bus->drv_pci[0]; + + bcma_core_pci_extend_L1timer(pc, false); +} +EXPORT_SYMBOL_GPL(bcma_core_pci_down); diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 424760f..27f9ceb 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -185,6 +185,7 @@ struct pci_dev; #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 struct bcma_drv_pci; +struct bcma_bus; #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE struct bcma_drv_pci_host { @@ -220,6 +221,8 @@ extern void bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); +extern void bcma_core_pci_up(struct bcma_bus *bus); +extern void bcma_core_pci_down(struct bcma_bus *bus); extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); -- cgit v0.10.2 From aa51e598d04c6acf5477934cd6383f5a17ce9029 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 24 Aug 2013 00:32:31 +0200 Subject: brcmsmac: use bcma PCIe up and down functions replace the calls to bcma_core_pci_extend_L1timer() by calls to the newly introduced bcma_core_pci_ip() and bcma_core_pci_down() Signed-off-by: Hauke Mehrtens Cc: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c index e4fd1ee..5336597 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c @@ -679,27 +679,6 @@ bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode) return mode == BCMA_CLKMODE_FAST; } -void ai_pci_up(struct si_pub *sih) -{ - struct si_info *sii; - - sii = container_of(sih, struct si_info, pub); - - if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) - bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true); -} - -/* Unconfigure and/or apply various WARs when going down */ -void ai_pci_down(struct si_pub *sih) -{ - struct si_info *sii; - - sii = container_of(sih, struct si_info, pub); - - if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) - bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false); -} - /* Enable BT-COEX & Ex-PA for 4313 */ void ai_epa_4313war(struct si_pub *sih) { diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h index 89562c1..a8a267b 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h @@ -183,9 +183,6 @@ extern u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih); extern bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode); extern bool ai_deviceremoved(struct si_pub *sih); -extern void ai_pci_down(struct si_pub *sih); -extern void ai_pci_up(struct si_pub *sih); - /* Enable Ex-PA for 4313 */ extern void ai_epa_4313war(struct si_pub *sih); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index c3c6123..4608e0e 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -4669,7 +4669,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, brcms_c_coredisable(wlc_hw); /* Match driver "down" state */ - ai_pci_down(wlc_hw->sih); + bcma_core_pci_down(wlc_hw->d11core->bus); /* turn off pll and xtal to match driver "down" state */ brcms_b_xtal(wlc_hw, OFF); @@ -5012,12 +5012,12 @@ static int brcms_b_up_prep(struct brcms_hardware *wlc_hw) */ if (brcms_b_radio_read_hwdisabled(wlc_hw)) { /* put SB PCI in down state again */ - ai_pci_down(wlc_hw->sih); + bcma_core_pci_down(wlc_hw->d11core->bus); brcms_b_xtal(wlc_hw, OFF); return -ENOMEDIUM; } - ai_pci_up(wlc_hw->sih); + bcma_core_pci_up(wlc_hw->d11core->bus); /* reset the d11 core */ brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); @@ -5214,7 +5214,7 @@ static int brcms_b_down_finish(struct brcms_hardware *wlc_hw) /* turn off primary xtal and pll */ if (!wlc_hw->noreset) { - ai_pci_down(wlc_hw->sih); + bcma_core_pci_down(wlc_hw->d11core->bus); brcms_b_xtal(wlc_hw, OFF); } } -- cgit v0.10.2 From 780335acc815802dcee63d75f5589d43c3ccb402 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 24 Aug 2013 00:32:32 +0200 Subject: bcma: do not export bcma_core_pci_extend_L1timer() This is not called any more, do not export it. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index 6ea817f..d51d194 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -262,7 +262,7 @@ out: } EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); -void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) +static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) { u32 w; @@ -274,7 +274,6 @@ void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); } -EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); void bcma_core_pci_up(struct bcma_bus *bus) { diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 27f9ceb..0234955 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -220,7 +220,6 @@ struct bcma_drv_pci { extern void bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); -extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); extern void bcma_core_pci_up(struct bcma_bus *bus); extern void bcma_core_pci_down(struct bcma_bus *bus); -- cgit v0.10.2 From 521deea64088bc885a76bd174241eaa3d3a6876f Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 24 Aug 2013 00:32:33 +0200 Subject: bcma: add bcma_core_pci_power_save() This enables or disables power saving on the PCIe bus when the wifi is in operation or not. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index d51d194..c9fd694 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); } -static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) { u32 v; int i; @@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) } } -static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) { int max_retries = 10; u16 ret = 0; @@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) return ret; } -static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, u8 address, u16 data) { int max_retries = 10; @@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); } +static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, + u8 address, u16 data) +{ + bcma_pcie_mdio_write(pc, device, address, data); + return bcma_pcie_mdio_read(pc, device, address); +} + /************************************************** * Workarounds. **************************************************/ @@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) } } +static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) +{ + u16 data; + + if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { + data = up ? 0x74 : 0x7C; + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); + } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { + data = up ? 0x75 : 0x7D; + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); + bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, + BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); + } +} + /************************************************** * Init. **************************************************/ @@ -284,6 +310,8 @@ void bcma_core_pci_up(struct bcma_bus *bus) pc = &bus->drv_pci[0]; + bcma_core_pci_power_save(pc, true); + bcma_core_pci_extend_L1timer(pc, true); } EXPORT_SYMBOL_GPL(bcma_core_pci_up); @@ -298,5 +326,7 @@ void bcma_core_pci_down(struct bcma_bus *bus) pc = &bus->drv_pci[0]; bcma_core_pci_extend_L1timer(pc, false); + + bcma_core_pci_power_save(pc, false); } EXPORT_SYMBOL_GPL(bcma_core_pci_down); diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 0234955..d66033f 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -181,6 +181,26 @@ struct pci_dev; #define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 +#define BCMA_CORE_PCI_ + +/* MDIO devices (SERDES modules) */ +#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 +#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 +#define BCMA_CORE_PCI_MDIO_BLK0 0x800 +#define BCMA_CORE_PCI_MDIO_BLK1 0x801 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A +#define BCMA_CORE_PCI_MDIO_BLK2 0x802 +#define BCMA_CORE_PCI_MDIO_BLK3 0x803 +#define BCMA_CORE_PCI_MDIO_BLK4 0x804 +#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ +#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 +#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 +#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 + /* PCIE Root Capability Register bits (Host mode only) */ #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 -- cgit v0.10.2 From 50023008f63c162bdb4b688c65d826bad627120e Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 24 Aug 2013 00:32:34 +0200 Subject: b43: call PCIe up and down functions Tell the PCIe host core when the wifi is activated. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 0e933bb..ccd24f0a 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4645,6 +4645,19 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_RUN, B43_MACCTL_PSM_JMP0); + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + bcma_core_pci_down(dev->dev->bdev->bus); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + /* TODO */ + break; +#endif + } + b43_dma_free(dev); b43_pio_free(dev); b43_chip_exit(dev); @@ -4684,6 +4697,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev) case B43_BUS_BCMA: bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0], dev->dev->bdev, true); + bcma_core_pci_up(dev->dev->bdev->bus); break; #endif #ifdef CONFIG_B43_SSB -- cgit v0.10.2 From 027d3307f44c6ddccb2194474a18ff71cbff0ad9 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 23 Aug 2013 16:48:21 -0700 Subject: mwifiex: fix driver unload problem for usb chipsets We have usb_deregister() call in our rmmod routine. deauth, shutdown etc. commands will be sent to FW later when bus driver calls disconnect handler. This mechanism works fine with SDIO and PCIe interfaces, but there is an issue with USB. USB bus driver returns all URBs submitted for receiving data and command response immediately after usb_deregister() with failure status. Hence we don't send deauth, shutdown etc. command to firmware. The problem is fixed by moving code from disconnect handler to rmmod routine for USB interface. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index fca98b5..2472d4b 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -24,9 +24,9 @@ static const char usbdriver_name[] = "usb8797"; -static u8 user_rmmod; static struct mwifiex_if_ops usb_ops; static struct semaphore add_remove_card_sem; +static struct usb_card_rec *usb_card; static struct usb_device_id mwifiex_usb_table[] = { {USB_DEVICE(USB8797_VID, USB8797_PID_1)}, @@ -350,6 +350,7 @@ static int mwifiex_usb_probe(struct usb_interface *intf, card->udev = udev; card->intf = intf; + usb_card = card; pr_debug("info: bcdUSB=%#x Device Class=%#x SubClass=%#x Protocol=%#x\n", udev->descriptor.bcdUSB, udev->descriptor.bDeviceClass, @@ -532,7 +533,6 @@ static void mwifiex_usb_disconnect(struct usb_interface *intf) { struct usb_card_rec *card = usb_get_intfdata(intf); struct mwifiex_adapter *adapter; - int i; if (!card || !card->adapter) { pr_err("%s: card or card->adapter is NULL\n", __func__); @@ -543,27 +543,6 @@ static void mwifiex_usb_disconnect(struct usb_interface *intf) if (!adapter->priv_num) return; - /* In case driver is removed when asynchronous FW downloading is - * in progress - */ - wait_for_completion(&adapter->fw_load); - - if (user_rmmod) { -#ifdef CONFIG_PM - if (adapter->is_suspended) - mwifiex_usb_resume(intf); -#endif - for (i = 0; i < adapter->priv_num; i++) - if ((GET_BSS_ROLE(adapter->priv[i]) == - MWIFIEX_BSS_ROLE_STA) && - adapter->priv[i]->media_connected) - mwifiex_deauthenticate(adapter->priv[i], NULL); - - mwifiex_init_shutdown_fw(mwifiex_get_priv(adapter, - MWIFIEX_BSS_ROLE_ANY), - MWIFIEX_FUNC_SHUTDOWN); - } - mwifiex_usb_free(card); dev_dbg(adapter->dev, "%s: removing card\n", __func__); @@ -1032,8 +1011,29 @@ static void mwifiex_usb_cleanup_module(void) if (!down_interruptible(&add_remove_card_sem)) up(&add_remove_card_sem); - /* set the flag as user is removing this module */ - user_rmmod = 1; + if (usb_card) { + struct mwifiex_adapter *adapter = usb_card->adapter; + int i; + + /* In case driver is removed when asynchronous FW downloading is + * in progress + */ + wait_for_completion(&adapter->fw_load); + +#ifdef CONFIG_PM + if (adapter->is_suspended) + mwifiex_usb_resume(usb_card->intf); +#endif + for (i = 0; i < adapter->priv_num; i++) + if ((GET_BSS_ROLE(adapter->priv[i]) == + MWIFIEX_BSS_ROLE_STA) && + adapter->priv[i]->media_connected) + mwifiex_deauthenticate(adapter->priv[i], NULL); + + mwifiex_init_shutdown_fw(mwifiex_get_priv(adapter, + MWIFIEX_BSS_ROLE_ANY), + MWIFIEX_FUNC_SHUTDOWN); + } usb_deregister(&mwifiex_usb_driver); } -- cgit v0.10.2 From 68f95b09c80af7a0b7a27a03227fa802d55f3616 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 23 Aug 2013 16:48:22 -0700 Subject: mwifiex: fix ext_capab IE structure definition EXT_CAPAB_IE format involves IEEE header followed by bytestream of capabilities. Current structure has incorrect member u8 for data; fix it by defining it as u8[0]. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c index 41e9d25..b579a2e 100644 --- a/drivers/net/wireless/mwifiex/11n.c +++ b/drivers/net/wireless/mwifiex/11n.c @@ -292,6 +292,7 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, struct mwifiex_ie_types_extcap *ext_cap; int ret_len = 0; struct ieee80211_supported_band *sband; + struct ieee_types_header *hdr; u8 radio_type; if (!buffer || !*buffer) @@ -388,17 +389,18 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, } if (bss_desc->bcn_ext_cap) { + hdr = (void *)bss_desc->bcn_ext_cap; ext_cap = (struct mwifiex_ie_types_extcap *) *buffer; memset(ext_cap, 0, sizeof(struct mwifiex_ie_types_extcap)); ext_cap->header.type = cpu_to_le16(WLAN_EID_EXT_CAPABILITY); - ext_cap->header.len = cpu_to_le16(sizeof(ext_cap->ext_cap)); + ext_cap->header.len = cpu_to_le16(hdr->len); - memcpy((u8 *)ext_cap + sizeof(struct mwifiex_ie_types_header), + memcpy((u8 *)ext_cap->ext_capab, bss_desc->bcn_ext_cap + sizeof(struct ieee_types_header), le16_to_cpu(ext_cap->header.len)); - *buffer += sizeof(struct mwifiex_ie_types_extcap); - ret_len += sizeof(struct mwifiex_ie_types_extcap); + *buffer += sizeof(struct mwifiex_ie_types_extcap) + hdr->len; + ret_len += sizeof(struct mwifiex_ie_types_extcap) + hdr->len; } return ret_len; diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h index c9ad1c0..f80f30b 100644 --- a/drivers/net/wireless/mwifiex/fw.h +++ b/drivers/net/wireless/mwifiex/fw.h @@ -1330,7 +1330,7 @@ struct mwifiex_ie_types_2040bssco { struct mwifiex_ie_types_extcap { struct mwifiex_ie_types_header header; - u8 ext_cap; + u8 ext_capab[0]; } __packed; struct host_cmd_ds_mac_reg_access { -- cgit v0.10.2 From 587b36d3642bdc921f4d624a740b6d91f779324b Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 23 Aug 2013 16:48:23 -0700 Subject: mwifiex: drop gratuitous ARP frames This patch adds support for dropping gratuitous ARP frames which is requirement for WFA Hotspot2.0. Hotspot2.0 capability is enabled in driver if extended capabilities IE from BSS descriptor has 11u interworking enabled. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c index b579a2e..0b803c0 100644 --- a/drivers/net/wireless/mwifiex/11n.c +++ b/drivers/net/wireless/mwifiex/11n.c @@ -399,6 +399,12 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, bss_desc->bcn_ext_cap + sizeof(struct ieee_types_header), le16_to_cpu(ext_cap->header.len)); + if (hdr->len > 3 && + ext_cap->ext_capab[3] & WLAN_EXT_CAPA4_INTERWORKING_ENABLED) + priv->hs2_enabled = true; + else + priv->hs2_enabled = false; + *buffer += sizeof(struct mwifiex_ie_types_extcap) + hdr->len; ret_len += sizeof(struct mwifiex_ie_types_extcap) + hdr->len; } diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index ca149ae..fbad00a 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1508,6 +1508,7 @@ mwifiex_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev, " reason code %d\n", priv->cfg_bssid, reason_code); memset(priv->cfg_bssid, 0, ETH_ALEN); + priv->hs2_enabled = false; return 0; } diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h index a599347..5c85d78 100644 --- a/drivers/net/wireless/mwifiex/decl.h +++ b/drivers/net/wireless/mwifiex/decl.h @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -152,4 +153,12 @@ struct mwifiex_types_wmm_info { u8 reserved; struct ieee_types_wmm_ac_parameters ac_params[IEEE80211_NUM_ACS]; } __packed; + +struct mwifiex_arp_eth_header { + struct arphdr hdr; + u8 ar_sha[ETH_ALEN]; + u8 ar_sip[4]; + u8 ar_tha[ETH_ALEN]; + u8 ar_tip[4]; +} __packed; #endif /* !_MWIFIEX_DECL_H_ */ diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c index e021a58..6499117 100644 --- a/drivers/net/wireless/mwifiex/init.c +++ b/drivers/net/wireless/mwifiex/init.c @@ -136,6 +136,7 @@ int mwifiex_init_priv(struct mwifiex_private *priv) priv->csa_chan = 0; priv->csa_expire_time = 0; priv->del_list_idx = 0; + priv->hs2_enabled = false; return mwifiex_add_bss_prio_tbl(priv); } diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index d2e5ccd..7d4d137 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -516,6 +516,7 @@ struct mwifiex_private { u8 csa_chan; unsigned long csa_expire_time; u8 del_list_idx; + bool hs2_enabled; }; enum mwifiex_ba_status { diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c index b5c1095..bb22664 100644 --- a/drivers/net/wireless/mwifiex/sta_rx.c +++ b/drivers/net/wireless/mwifiex/sta_rx.c @@ -17,6 +17,8 @@ * this warranty disclaimer. */ +#include +#include #include "decl.h" #include "ioctl.h" #include "util.h" @@ -25,6 +27,46 @@ #include "11n_aggr.h" #include "11n_rxreorder.h" +/* This function checks if a frame is IPv4 ARP or IPv6 Neighbour advertisement + * frame. If frame has both source and destination mac address as same, this + * function drops such gratuitous frames. + */ +static bool +mwifiex_discard_gratuitous_arp(struct mwifiex_private *priv, + struct sk_buff *skb) +{ + const struct mwifiex_arp_eth_header *arp; + struct ethhdr *eth_hdr; + struct ipv6hdr *ipv6; + struct icmp6hdr *icmpv6; + + eth_hdr = (struct ethhdr *)skb->data; + switch (ntohs(eth_hdr->h_proto)) { + case ETH_P_ARP: + arp = (void *)(skb->data + sizeof(struct ethhdr)); + if (arp->hdr.ar_op == htons(ARPOP_REPLY) || + arp->hdr.ar_op == htons(ARPOP_REQUEST)) { + if (!memcmp(arp->ar_sip, arp->ar_tip, 4)) + return true; + } + break; + case ETH_P_IPV6: + ipv6 = (void *)(skb->data + sizeof(struct ethhdr)); + icmpv6 = (void *)(skb->data + sizeof(struct ethhdr) + + sizeof(struct ipv6hdr)); + if (NDISC_NEIGHBOUR_ADVERTISEMENT == icmpv6->icmp6_type) { + if (!memcmp(&ipv6->saddr, &ipv6->daddr, + sizeof(struct in6_addr))) + return true; + } + break; + default: + break; + } + + return false; +} + /* * This function processes the received packet and forwards it * to kernel/upper layer. @@ -90,6 +132,13 @@ int mwifiex_process_rx_packet(struct mwifiex_private *priv, either the reconstructed EthII frame or the 802.2/llc/snap frame */ skb_pull(skb, hdr_chop); + if (priv->hs2_enabled && + mwifiex_discard_gratuitous_arp(priv, skb)) { + dev_dbg(priv->adapter->dev, "Bypassed Gratuitous ARP\n"); + dev_kfree_skb_any(skb); + return 0; + } + priv->rxpd_rate = local_rx_pd->rx_rate; priv->rxpd_htinfo = local_rx_pd->ht_info; -- cgit v0.10.2 From b380a43b52bee70f2e31ed573d33191efd82f5ae Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Sun, 25 Aug 2013 14:43:09 +0530 Subject: ath9k: Fix ASPM for AR9462 If the L1 entrance latency is not calibrated properly in the EEPROM in WB222 boards, there could be problems in connectivity. Check and correct the calibrated value if it doesn't match the optimal value for WB222, 4us. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 738aa7e..582cddd 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -745,6 +745,20 @@ static void ar9003_hw_init_mode_gain_regs(struct ath_hw *ah) static void ar9003_hw_configpcipowersave(struct ath_hw *ah, bool power_off) { + /* + * Increase L1 Entry Latency. Some WB222 boards don't have + * this change in eeprom/OTP. + * + */ + if (AR_SREV_9462(ah)) { + u32 val = ah->config.aspm_l1_fix; + if ((val & 0xff000000) == 0x17000000) { + val &= 0x00ffffff; + val |= 0x27000000; + REG_WRITE(ah, 0x570c, val); + } + } + /* Nothing to do on restore for 11N */ if (!power_off /* !restore */) { /* set bit 19 to allow forcing of pcie core into L1 state */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index fa543a6..69a907b 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -311,6 +311,7 @@ struct ath9k_ops_config { u16 ani_poll_interval; /* ANI poll interval in ms */ /* Platform specific config */ + u32 aspm_l1_fix; u32 xlna_gpio; u32 ant_ctrl_comm2g_switch_enable; bool xatten_margin_cfg; diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 3280798..e7996a6 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -314,6 +314,22 @@ static void ath_pci_aspm_init(struct ath_common *common) return; } + /* + * 0x70c - Ack Frequency Register. + * + * Bits 27:29 - DEFAULT_L1_ENTRANCE_LATENCY. + * + * 000 : 1 us + * 001 : 2 us + * 010 : 4 us + * 011 : 8 us + * 100 : 16 us + * 101 : 32 us + * 110/111 : 64 us + */ + if (AR_SREV_9462(ah)) + pci_read_config_dword(pdev, 0x70c, &ah->config.aspm_l1_fix); + pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &aspm); if (aspm & (PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1)) { ah->aspm_enabled = true; -- cgit v0.10.2 From 8aada63cc408874916a19341ba514f941096e424 Mon Sep 17 00:00:00 2001 From: Djalal Harouni Date: Sun, 25 Aug 2013 11:50:49 +0100 Subject: ath5k: debugfs: NULL-terminate strings Avoid processing garbage data by NULL terminating the strings. Signed-off-by: Djalal Harouni Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c index 9d00dab..b8d031a 100644 --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -245,9 +245,11 @@ static ssize_t write_file_beacon(struct file *file, struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "disable", 7) == 0) { AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); pr_info("debugfs disable beacons\n"); @@ -345,9 +347,11 @@ static ssize_t write_file_debug(struct file *file, unsigned int i; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; for (i = 0; i < ARRAY_SIZE(dbg_info); i++) { if (strncmp(buf, dbg_info[i].name, strlen(dbg_info[i].name)) == 0) { @@ -448,9 +452,11 @@ static ssize_t write_file_antenna(struct file *file, unsigned int i; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "diversity", 9) == 0) { ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); pr_info("debug: enable diversity\n"); @@ -619,9 +625,11 @@ static ssize_t write_file_frameerrors(struct file *file, struct ath5k_statistics *st = &ah->stats; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "clear", 5) == 0) { st->rxerr_crc = 0; st->rxerr_phy = 0; @@ -766,9 +774,11 @@ static ssize_t write_file_ani(struct file *file, struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "sens-low", 8) == 0) { ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_HIGH); } else if (strncmp(buf, "sens-high", 9) == 0) { @@ -862,9 +872,11 @@ static ssize_t write_file_queue(struct file *file, struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "start", 5) == 0) ieee80211_wake_queues(ah->hw); else if (strncmp(buf, "stop", 4) == 0) -- cgit v0.10.2 From d1ae25a0174938f03e28dee8f3269a826fc1bec5 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Sun, 25 Aug 2013 16:30:40 +0530 Subject: ath9k: Fix ASPM workaround usage The PCIE Workaround register (AR_WA/0x4004) is used to handle various hardware quirks. For AR9002 chips, AR_WA_D3_L1_DISABLE is used to prevent the HW from automatically entering L1 state when D3 is enforced. AR_WA_D3_L1_DISABLE has to be enabled for a few AR9280 based cards, mark them based on their PCI subdevice/subvendor IDs and enforce it in ar9002_hw_configpcipowersave(). Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 8dc2d08..fb61b08 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -269,13 +269,12 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE) val |= AR_WA_D3_L1_DISABLE; } else { - if (((AR_SREV_9285(ah) || - AR_SREV_9271(ah) || - AR_SREV_9287(ah)) && - (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) || - (AR_SREV_9280(ah) && - (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) { - val |= AR_WA_D3_L1_DISABLE; + if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) { + if (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE) + val |= AR_WA_D3_L1_DISABLE; + } else if (AR_SREV_9280(ah)) { + if (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE) + val |= AR_WA_D3_L1_DISABLE; } } @@ -297,24 +296,18 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, } else { if (ah->config.pcie_waen) { val = ah->config.pcie_waen; - if (!power_off) - val &= (~AR_WA_D3_L1_DISABLE); + val &= (~AR_WA_D3_L1_DISABLE); } else { - if (AR_SREV_9285(ah) || - AR_SREV_9271(ah) || - AR_SREV_9287(ah)) { + if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) { val = AR9285_WA_DEFAULT; - if (!power_off) - val &= (~AR_WA_D3_L1_DISABLE); - } - else if (AR_SREV_9280(ah)) { + val &= (~AR_WA_D3_L1_DISABLE); + } else if (AR_SREV_9280(ah)) { /* * For AR9280 chips, bit 22 of 0x4004 * needs to be set. */ val = AR9280_WA_DEFAULT; - if (!power_off) - val &= (~AR_WA_D3_L1_DISABLE); + val &= (~AR_WA_D3_L1_DISABLE); } else { val = AR_WA_DEFAULT; } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 582cddd..608bb48 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -763,12 +763,7 @@ static void ar9003_hw_configpcipowersave(struct ath_hw *ah, if (!power_off /* !restore */) { /* set bit 19 to allow forcing of pcie core into L1 state */ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); - - /* Several PCIe massages to ensure proper behaviour */ - if (ah->config.pcie_waen) - REG_WRITE(ah, AR_WA, ah->config.pcie_waen); - else - REG_WRITE(ah, AR_WA, ah->WARegVal); + REG_WRITE(ah, AR_WA, ah->WARegVal); } /* diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 8519e75..2ee35f6 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -631,6 +631,7 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs); #define ATH9K_PCI_CUS217 0x0004 #define ATH9K_PCI_WOW 0x0008 #define ATH9K_PCI_BT_ANT_DIV 0x0010 +#define ATH9K_PCI_D3_L1_WAR 0x0020 /* * Default cache line size, in bytes. diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index b3a6891..2670bf6 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -450,7 +450,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah) ah->config.ack_6mb = 0x0; ah->config.cwm_ignore_extcca = 0; ah->config.pcie_clock_req = 0; - ah->config.pcie_waen = 0; ah->config.analog_shiftreg = 1; for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 19b46c7..c9f787d 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -551,6 +551,11 @@ static void ath9k_init_platform(struct ath_softc *sc) pCap->hw_caps |= ATH9K_HW_CAP_BT_ANT_DIV; ath_info(common, "Set BT/WLAN RX diversity capability\n"); } + + if (sc->driver_data & ATH9K_PCI_D3_L1_WAR) { + ah->config.pcie_waen = 0x0040473b; + ath_info(common, "Enable WAR for ASPM D3/L1\n"); + } } static void ath9k_eeprom_request_cb(const struct firmware *eeprom_blob, diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index e7996a6..d089a7c 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -30,6 +30,52 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + PCI_VENDOR_ID_AZWAVE, + 0x1C71), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + PCI_VENDOR_ID_FOXCONN, + 0xE01F), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + 0x11AD, /* LITEON */ + 0x6632), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + 0x11AD, /* LITEON */ + 0x6642), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + PCI_VENDOR_ID_QMI, + 0x0306), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + 0x185F, /* WNC */ + 0x309D), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + 0x10CF, /* Fujitsu */ + 0x147C), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + 0x10CF, /* Fujitsu */ + 0x147D), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x002A, + 0x10CF, /* Fujitsu */ + 0x1536), + .driver_data = ATH9K_PCI_D3_L1_WAR }, + /* AR9285 card for Asus */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, 0x002B, -- cgit v0.10.2 From d4c04ba141d4c5981aebc0aa0ecadc0f16f99387 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 26 Aug 2013 11:47:22 +0530 Subject: ath9k: Fix TX poll work locking There is no need to call ath_txq_unlock_complete() in the TX poll routine - frame completion is not done here, so use ath_txq_unlock(). Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index fff5d3c..2f831db 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -41,7 +41,7 @@ void ath_tx_complete_poll_work(struct work_struct *work) txq->axq_tx_inprogress = true; } } - ath_txq_unlock_complete(sc, txq); + ath_txq_unlock(sc, txq); } if (needreset) { -- cgit v0.10.2 From cfcd926ea2bc46aaca4e9ca3f0a3b8ac35b9d691 Mon Sep 17 00:00:00 2001 From: Tobias Waldekranz Date: Mon, 26 Aug 2013 09:18:06 +0200 Subject: mwifiex: add missing endian conversions Fixes multiple locations where a little endian host is assumed during ser/des of messages sent to/received from the chip. Signed-off-by: Tobias Waldekranz Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c index 8f9f542..f69d7e0 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/mwifiex/11n_aggr.c @@ -69,7 +69,7 @@ mwifiex_11n_form_amsdu_pkt(struct sk_buff *skb_aggr, memcpy(&tx_header->eth803_hdr, skb_src->data, dt_offset); /* Copy SNAP header */ - snap.snap_type = *(u16 *) ((u8 *)skb_src->data + dt_offset); + snap.snap_type = le16_to_cpu(*(__le16 *) ((u8 *)skb_src->data + dt_offset)); dt_offset += sizeof(u16); memcpy(&tx_header->rfc1042_hdr, &snap, sizeof(struct rfc_1042_hdr)); diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index 7d4d137..1d72f13 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -1026,7 +1026,7 @@ mwifiex_netdev_get_priv(struct net_device *dev) */ static inline bool mwifiex_is_skb_mgmt_frame(struct sk_buff *skb) { - return (*(u32 *)skb->data == PKT_TYPE_MGMT); + return (le32_to_cpu(*(__le32 *)skb->data) == PKT_TYPE_MGMT); } /* This function retrieves channel closed for operation by Channel diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index 0e2070f..1576104 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -1062,7 +1062,7 @@ static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter, case MWIFIEX_TYPE_EVENT: dev_dbg(adapter->dev, "info: --- Rx: Event ---\n"); - adapter->event_cause = *(u32 *) skb->data; + adapter->event_cause = le32_to_cpu(*(__le32 *) skb->data); if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE)) memcpy(adapter->event_body, @@ -1207,8 +1207,8 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter, for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) { /* get curr PKT len & type */ - pkt_len = *(u16 *) &curr_ptr[0]; - pkt_type = *(u16 *) &curr_ptr[2]; + pkt_len = le16_to_cpu(*(__le16 *) &curr_ptr[0]); + pkt_type = le16_to_cpu(*(__le16 *) &curr_ptr[2]); /* copy pkt to deaggr buf */ skb_deaggr = card->mpa_rx.skb_arr[pind]; diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c index 6a814eb..58a6013 100644 --- a/drivers/net/wireless/mwifiex/sta_cmdresp.c +++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c @@ -280,7 +280,7 @@ static int mwifiex_ret_tx_rate_cfg(struct mwifiex_private *priv, tlv_buf = ((u8 *)rate_cfg) + sizeof(struct host_cmd_ds_tx_rate_cfg); - tlv_buf_len = *(u16 *) (tlv_buf + sizeof(u16)); + tlv_buf_len = le16_to_cpu(*(__le16 *) (tlv_buf + sizeof(u16))); while (tlv_buf && tlv_buf_len > 0) { tlv = (*tlv_buf); -- cgit v0.10.2 From 58fe431342fdcf53fe93c4482351a9aa46762a11 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 26 Aug 2013 15:32:01 +0800 Subject: zd1201: fix error return code Fix to return -ENOMEM in the memory alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index 4941f20..73aa738 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -75,8 +75,10 @@ static int zd1201_fw_upload(struct usb_device *dev, int apfw) len = fw_entry->size; buf = kmalloc(1024, GFP_ATOMIC); - if (!buf) + if (!buf) { + err = -ENOMEM; goto exit; + } while (len > 0) { int translen = (len > 1024) ? 1024 : len; @@ -1762,8 +1764,10 @@ static int zd1201_probe(struct usb_interface *interface, zd->endp_out2 = 2; zd->rx_urb = usb_alloc_urb(0, GFP_KERNEL); zd->tx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!zd->rx_urb || !zd->tx_urb) + if (!zd->rx_urb || !zd->tx_urb) { + err = -ENOMEM; goto err_zd; + } mdelay(100); err = zd1201_drvr_start(zd); -- cgit v0.10.2 From e5614a91be86b4b2d56f68c036fd7e81473b4016 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 26 Aug 2013 13:23:43 +0530 Subject: ath9k: Fix DEBUG_FS dependency for ath9k Reported-by: Johannes Berg Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index c91bc61..7944c25 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -56,7 +56,7 @@ config ATH9K_AHB config ATH9K_DEBUGFS bool "Atheros ath9k debugging" - depends on ATH9K + depends on ATH9K && DEBUG_FS select MAC80211_DEBUGFS select RELAY ---help--- -- cgit v0.10.2 From 93ba2a856f75aead35a043f169a49ce398afe737 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Mon, 26 Aug 2013 13:53:30 +0200 Subject: Update e-mail address for Andrea Merello (resubmit) A lot of files contain reference to my old e-mail address. Now I'm going not to read mail from it anymore, so update it with my current address everywhere. Signed-off-by: Andrea Merello Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index 91a04e2..fc207b2 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -3,10 +3,10 @@ * Linux device driver for RTL8180 / RTL8185 * * Copyright 2007 Michael Wu - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * * Thanks to Realtek for their support! * @@ -32,7 +32,7 @@ #include "grf5101.h" MODULE_AUTHOR("Michael Wu "); -MODULE_AUTHOR("Andrea Merello "); +MODULE_AUTHOR("Andrea Merello "); MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/rtl818x/rtl8180/grf5101.c b/drivers/net/wireless/rtl818x/rtl8180/grf5101.c index 077ff92..dc845693 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/grf5101.c +++ b/drivers/net/wireless/rtl818x/rtl8180/grf5101.c @@ -2,7 +2,7 @@ /* * Radio tuning for GCT GRF5101 on RTL8180 * - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Code from the BSD driver and the rtl8181 project have been * very useful to understand certain things diff --git a/drivers/net/wireless/rtl818x/rtl8180/grf5101.h b/drivers/net/wireless/rtl818x/rtl8180/grf5101.h index 7664711..4d80a27 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/grf5101.h +++ b/drivers/net/wireless/rtl818x/rtl8180/grf5101.h @@ -4,7 +4,7 @@ /* * Radio tuning for GCT GRF5101 on RTL8180 * - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Code from the BSD driver and the rtl8181 project have been * very useful to understand certain things diff --git a/drivers/net/wireless/rtl818x/rtl8180/max2820.c b/drivers/net/wireless/rtl818x/rtl8180/max2820.c index 4715000..a63c443 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/max2820.c +++ b/drivers/net/wireless/rtl818x/rtl8180/max2820.c @@ -1,7 +1,7 @@ /* * Radio tuning for Maxim max2820 on RTL8180 * - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Code from the BSD driver and the rtl8181 project have been * very useful to understand certain things diff --git a/drivers/net/wireless/rtl818x/rtl8180/max2820.h b/drivers/net/wireless/rtl818x/rtl8180/max2820.h index 61cf6d1..8e982b7 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/max2820.h +++ b/drivers/net/wireless/rtl818x/rtl8180/max2820.h @@ -4,7 +4,7 @@ /* * Radio tuning for Maxim max2820 on RTL8180 * - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Code from the BSD driver and the rtl8181 project have been * very useful to understand certain things diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c index cc2a541..ee638d0 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c @@ -3,10 +3,10 @@ * Radio tuning for RTL8225 on RTL8180 * * Copyright 2007 Michael Wu - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Based on the r8180 driver, which is: - * Copyright 2005 Andrea Merello , et al. + * Copyright 2005 Andrea Merello , et al. * * Thanks to Realtek for their support! * diff --git a/drivers/net/wireless/rtl818x/rtl8180/sa2400.c b/drivers/net/wireless/rtl818x/rtl8180/sa2400.c index b3ec40f..7614d9c 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/sa2400.c +++ b/drivers/net/wireless/rtl818x/rtl8180/sa2400.c @@ -2,7 +2,7 @@ /* * Radio tuning for Philips SA2400 on RTL8180 * - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Code from the BSD driver and the rtl8181 project have been * very useful to understand certain things diff --git a/drivers/net/wireless/rtl818x/rtl8180/sa2400.h b/drivers/net/wireless/rtl818x/rtl8180/sa2400.h index a4aaa0d..fb0093f 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/sa2400.h +++ b/drivers/net/wireless/rtl818x/rtl8180/sa2400.h @@ -4,7 +4,7 @@ /* * Radio tuning for Philips SA2400 on RTL8180 * - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Code from the BSD driver and the rtl8181 project have been * very useful to understand certain things diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index f49220e..841fb9d 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -2,10 +2,10 @@ * Linux device driver for RTL8187 * * Copyright 2007 Michael Wu - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Based on the r8187 driver, which is: - * Copyright 2005 Andrea Merello , et al. + * Copyright 2005 Andrea Merello , et al. * * The driver was extended to the RTL8187B in 2008 by: * Herton Ronaldo Krzesinski @@ -37,7 +37,7 @@ #include "rfkill.h" MODULE_AUTHOR("Michael Wu "); -MODULE_AUTHOR("Andrea Merello "); +MODULE_AUTHOR("Andrea Merello "); MODULE_AUTHOR("Herton Ronaldo Krzesinski "); MODULE_AUTHOR("Hin-Tak Leung "); MODULE_AUTHOR("Larry Finger "); diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h index e19a20a..56aee06 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h @@ -2,10 +2,10 @@ * Definitions for RTL8187 hardware * * Copyright 2007 Michael Wu - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Based on the r8187 driver, which is: - * Copyright 2005 Andrea Merello , et al. + * Copyright 2005 Andrea Merello , et al. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c index f0bf35f..a26193a 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c @@ -2,10 +2,10 @@ * Radio tuning for RTL8225 on RTL8187 * * Copyright 2007 Michael Wu - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Based on the r8187 driver, which is: - * Copyright 2005 Andrea Merello , et al. + * Copyright 2005 Andrea Merello , et al. * * Magic delays, register offsets, and phy value tables below are * taken from the original r8187 driver sources. Thanks to Realtek diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h index 20c5b6e..141afb0 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h +++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h @@ -2,10 +2,10 @@ * Radio tuning definitions for RTL8225 on RTL8187 * * Copyright 2007 Michael Wu - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Based on the r8187 driver, which is: - * Copyright 2005 Andrea Merello , et al. + * Copyright 2005 Andrea Merello , et al. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h index 1615f63..ce23dfd 100644 --- a/drivers/net/wireless/rtl818x/rtl818x.h +++ b/drivers/net/wireless/rtl818x/rtl818x.h @@ -2,10 +2,10 @@ * Definitions for RTL818x hardware * * Copyright 2007 Michael Wu - * Copyright 2007 Andrea Merello + * Copyright 2007 Andrea Merello * * Based on the r8187 driver, which is: - * Copyright 2005 Andrea Merello , et al. + * Copyright 2005 Andrea Merello , et al. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h index 8fc9f58..7f01549 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h @@ -14,7 +14,7 @@ * Copyright (c) 2004, Intel Corporation * * Modified for Realtek's wi-fi cards by Andrea Merello - * + * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c index d5df0d6..10b2210 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c @@ -14,7 +14,7 @@ ****************************************************************************** Few modifications for Realtek's Wi-Fi drivers by - Andrea Merello + Andrea Merello A special thanks goes to Realtek for their support ! diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 00f9af0..b65db54 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -1,5 +1,5 @@ /* IEEE 802.11 SoftMAC layer - * Copyright (c) 2005 Andrea Merello + * Copyright (c) 2005 Andrea Merello * * Mostly extracted from the rtl8180-sa2400 driver for the * in-kernel generic ieee802.11 stack. diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c index d9add53..e528206 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c @@ -1,5 +1,5 @@ /* IEEE 802.11 SoftMAC layer - * Copyright (c) 2005 Andrea Merello + * Copyright (c) 2005 Andrea Merello * * Mostly extracted from the rtl8180-sa2400 driver for the * in-kernel generic ieee802.11 stack. diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c index 89ed86e..b346653 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c @@ -25,7 +25,7 @@ ****************************************************************************** Few modifications for Realtek's Wi-Fi drivers by - Andrea Merello + Andrea Merello A special thanks goes to Realtek for their support ! diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h index edacc80..d052f4a 100644 --- a/drivers/staging/rtl8187se/r8180.h +++ b/drivers/staging/rtl8187se/r8180.h @@ -1,6 +1,6 @@ /* This is part of rtl8180 OpenSource driver. - Copyright (C) Andrea Merello 2004-2005 + Copyright (C) Andrea Merello 2004-2005 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part of the diff --git a/drivers/staging/rtl8187se/r8180_93cx6.h b/drivers/staging/rtl8187se/r8180_93cx6.h index 79e7391..b52b5b0 100644 --- a/drivers/staging/rtl8187se/r8180_93cx6.h +++ b/drivers/staging/rtl8187se/r8180_93cx6.h @@ -1,6 +1,6 @@ /* This is part of rtl8180 OpenSource driver - Copyright (C) Andrea Merello 2004-2005 + Copyright (C) Andrea Merello 2004-2005 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part of the official realtek driver diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index ca69155..fd2bfead 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -1,6 +1,6 @@ /* This is part of rtl818x pci OpenSource driver - v 0.1 - Copyright (C) Andrea Merello 2004-2005 + Copyright (C) Andrea Merello 2004-2005 Released under the terms of GPL (General Public License) Parts of this driver are based on the GPL part of the official @@ -70,7 +70,7 @@ static int hwwep; MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, rtl8180_pci_id_tbl); -MODULE_AUTHOR("Andrea Merello "); +MODULE_AUTHOR("Andrea Merello "); MODULE_DESCRIPTION("Linux driver for Realtek RTL8187SE WiFi cards"); module_param_string(ifname, ifname, sizeof(ifname), S_IRUGO|S_IWUSR); diff --git a/drivers/staging/rtl8187se/r8180_hw.h b/drivers/staging/rtl8187se/r8180_hw.h index 5339381..92c05af 100644 --- a/drivers/staging/rtl8187se/r8180_hw.h +++ b/drivers/staging/rtl8187se/r8180_hw.h @@ -1,6 +1,6 @@ /* This is part of rtl8180 OpenSource driver. - Copyright (C) Andrea Merello 2004-2005 + Copyright (C) Andrea Merello 2004-2005 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part of the diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.h b/drivers/staging/rtl8187se/r8180_rtl8225.h index c6f2128..c94ca07 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225.h +++ b/drivers/staging/rtl8187se/r8180_rtl8225.h @@ -1,7 +1,7 @@ /* This is part of the rtl8180-sa2400 driver released under the GPL (See file COPYING for details). - Copyright (c) 2005 Andrea Merello + Copyright (c) 2005 Andrea Merello This files contains programming code for the rtl8225 radio frontend. diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c index c592f79..9ae96b7 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c +++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c @@ -1,7 +1,7 @@ /* * This is part of the rtl8180-sa2400 driver * released under the GPL (See file COPYING for details). - * Copyright (c) 2005 Andrea Merello + * Copyright (c) 2005 Andrea Merello * * This files contains programming code for the rtl8225 * radio frontend. diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c index 156b758..dab7875 100644 --- a/drivers/staging/rtl8187se/r8180_wx.c +++ b/drivers/staging/rtl8187se/r8180_wx.c @@ -2,7 +2,7 @@ This file contains wireless extension handlers. This is part of rtl8180 OpenSource driver. - Copyright (C) Andrea Merello 2004-2005 + Copyright (C) Andrea Merello 2004-2005 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part diff --git a/drivers/staging/rtl8187se/r8180_wx.h b/drivers/staging/rtl8187se/r8180_wx.h index 4081914..d471520 100644 --- a/drivers/staging/rtl8187se/r8180_wx.h +++ b/drivers/staging/rtl8187se/r8180_wx.h @@ -1,6 +1,6 @@ /* This is part of rtl8180 OpenSource driver - v 0.3 - Copyright (C) Andrea Merello 2004 + Copyright (C) Andrea Merello 2004 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part of the official realtek driver diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c index 50c7bb7..74fbd70 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.h b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.h index b9b3b52..dbe0e1c 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.h +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.h @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_cam.c b/drivers/staging/rtl8192e/rtl8192e/rtl_cam.c index baf3b63..fa5603a 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_cam.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_cam.c @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_cam.h b/drivers/staging/rtl8192e/rtl8192e/rtl_cam.h index fa607f9..7d075d3 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_cam.h +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_cam.h @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c index 2b6c61c..8d45c8d 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h index 87d4d34..9de1dc3 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c b/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c index c1ccff4..a6778e0 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.h b/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.h index 9452e16..adea2b4 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.h +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.h @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c b/drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c index 0cfb3ec..529ea54 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_pci.c b/drivers/staging/rtl8192e/rtl8192e/rtl_pci.c index 5abbee3..2ad92ee 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_pci.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_pci.c @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_pci.h b/drivers/staging/rtl8192e/rtl8192e/rtl_pci.h index 28c7da6..356aec4 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_pci.h +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_pci.h @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_ps.c b/drivers/staging/rtl8192e/rtl8192e/rtl_ps.c index c9a7c56..a8c2ade 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_ps.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_ps.c @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_ps.h b/drivers/staging/rtl8192e/rtl8192e/rtl_ps.h index df79d6c..962f2e5 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_ps.h +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_ps.h @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h index 3485ef1..05ef49f 100644 --- a/drivers/staging/rtl8192e/rtllib.h +++ b/drivers/staging/rtl8192e/rtllib.h @@ -14,7 +14,7 @@ * Copyright (c) 2004, Intel Corporation * * Modified for Realtek's wi-fi cards by Andrea Merello - * + * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/staging/rtl8192e/rtllib_debug.h b/drivers/staging/rtl8192e/rtllib_debug.h index 2bfc115..c59f67b 100644 --- a/drivers/staging/rtl8192e/rtllib_debug.h +++ b/drivers/staging/rtl8192e/rtllib_debug.h @@ -2,7 +2,7 @@ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. * * Based on the r8180 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c index e75364e..96aa3a2 100644 --- a/drivers/staging/rtl8192e/rtllib_rx.c +++ b/drivers/staging/rtl8192e/rtllib_rx.c @@ -14,7 +14,7 @@ ****************************************************************************** Few modifications for Realtek's Wi-Fi drivers by - Andrea Merello + Andrea Merello A special thanks goes to Realtek for their support ! diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c index aefffac..0cbf6f5 100644 --- a/drivers/staging/rtl8192e/rtllib_softmac.c +++ b/drivers/staging/rtl8192e/rtllib_softmac.c @@ -1,5 +1,5 @@ /* IEEE 802.11 SoftMAC layer - * Copyright (c) 2005 Andrea Merello + * Copyright (c) 2005 Andrea Merello * * Mostly extracted from the rtl8180-sa2400 driver for the * in-kernel generic ieee802.11 stack. diff --git a/drivers/staging/rtl8192e/rtllib_softmac_wx.c b/drivers/staging/rtl8192e/rtllib_softmac_wx.c index 740cf85..e6af8cf 100644 --- a/drivers/staging/rtl8192e/rtllib_softmac_wx.c +++ b/drivers/staging/rtl8192e/rtllib_softmac_wx.c @@ -1,5 +1,5 @@ /* IEEE 802.11 SoftMAC layer - * Copyright (c) 2005 Andrea Merello + * Copyright (c) 2005 Andrea Merello * * Mostly extracted from the rtl8180-sa2400 driver for the * in-kernel generic ieee802.11 stack. diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c index 759d7c7..1cc6a9d 100644 --- a/drivers/staging/rtl8192e/rtllib_tx.c +++ b/drivers/staging/rtl8192e/rtllib_tx.c @@ -25,7 +25,7 @@ ****************************************************************************** Few modifications for Realtek's Wi-Fi drivers by - Andrea Merello + Andrea Merello A special thanks goes to Realtek for their support ! diff --git a/drivers/staging/rtl8192u/authors b/drivers/staging/rtl8192u/authors index b08bbae..0fab112 100644 --- a/drivers/staging/rtl8192u/authors +++ b/drivers/staging/rtl8192u/authors @@ -1 +1 @@ -Andrea Merello +Andrea Merello diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h index c9f3bb3..bc64f05 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h @@ -14,7 +14,7 @@ * Copyright (c) 2004, Intel Corporation * * Modified for Realtek's wi-fi cards by Andrea Merello - * + * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c index a6b1840..59900bf 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c @@ -14,7 +14,7 @@ ****************************************************************************** Few modifications for Realtek's Wi-Fi drivers by - Andrea Merello + Andrea Merello A special thanks goes to Realtek for their support ! diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c index 8a0075d..5fd6969 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c @@ -1,5 +1,5 @@ /* IEEE 802.11 SoftMAC layer - * Copyright (c) 2005 Andrea Merello + * Copyright (c) 2005 Andrea Merello * * Mostly extracted from the rtl8180-sa2400 driver for the * in-kernel generic ieee802.11 stack. diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c index 60746b8..7b7d929 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c @@ -1,5 +1,5 @@ /* IEEE 802.11 SoftMAC layer - * Copyright (c) 2005 Andrea Merello + * Copyright (c) 2005 Andrea Merello * * Mostly extracted from the rtl8180-sa2400 driver for the * in-kernel generic ieee802.11 stack. diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c index 9955042..a7bcc64f 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c @@ -25,7 +25,7 @@ ****************************************************************************** Few modifications for Realtek's Wi-Fi drivers by - Andrea Merello + Andrea Merello A special thanks goes to Realtek for their support ! diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c index d219998..c61729b 100644 --- a/drivers/staging/rtl8192u/r8180_93cx6.c +++ b/drivers/staging/rtl8192u/r8180_93cx6.c @@ -3,7 +3,7 @@ memory is addressed by 16 bits words. This is part of rtl8180 OpenSource driver. - Copyright (C) Andrea Merello 2004 + Copyright (C) Andrea Merello 2004 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part of the diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h index 5cea51e..ee55dbf 100644 --- a/drivers/staging/rtl8192u/r8180_93cx6.h +++ b/drivers/staging/rtl8192u/r8180_93cx6.h @@ -1,6 +1,6 @@ /* This is part of rtl8187 OpenSource driver - Copyright (C) Andrea Merello 2004-2005 + Copyright (C) Andrea Merello 2004-2005 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part of the official realtek driver diff --git a/drivers/staging/rtl8192u/r8180_pm.c b/drivers/staging/rtl8192u/r8180_pm.c index 0c58d0e..999968d 100644 --- a/drivers/staging/rtl8192u/r8180_pm.c +++ b/drivers/staging/rtl8192u/r8180_pm.c @@ -5,7 +5,7 @@ does not do anything useful. This is part of rtl8180 OpenSource driver. - Copyright (C) Andrea Merello 2004 + Copyright (C) Andrea Merello 2004 Released under the terms of GPL (General Public Licence) */ diff --git a/drivers/staging/rtl8192u/r8180_pm.h b/drivers/staging/rtl8192u/r8180_pm.h index 52d6fba..4be63da 100644 --- a/drivers/staging/rtl8192u/r8180_pm.h +++ b/drivers/staging/rtl8192u/r8180_pm.h @@ -5,7 +5,7 @@ does not do anything useful. This is part of rtl8180 OpenSource driver. - Copyright (C) Andrea Merello 2004 + Copyright (C) Andrea Merello 2004 Released under the terms of GPL (General Public Licence) */ diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.h b/drivers/staging/rtl8192u/r8190_rtl8256.h index b64dd66..592e780 100644 --- a/drivers/staging/rtl8192u/r8190_rtl8256.h +++ b/drivers/staging/rtl8192u/r8190_rtl8256.h @@ -1,7 +1,7 @@ /* This is part of the rtl8180-sa2400 driver released under the GPL (See file COPYING for details). - Copyright (c) 2005 Andrea Merello + Copyright (c) 2005 Andrea Merello This files contains programming code for the rtl8256 radio frontend. diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h index 338e7bc..b484ee1 100644 --- a/drivers/staging/rtl8192u/r8192U.h +++ b/drivers/staging/rtl8192u/r8192U.h @@ -1,6 +1,6 @@ /* * This is part of rtl8187 OpenSource driver. - * Copyright (C) Andrea Merello 2004-2005 + * Copyright (C) Andrea Merello 2004-2005 * Released under the terms of GPL (General Public Licence) * * Parts of this driver are based on the GPL part of the diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 14c14c2..cd0946d 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -3,7 +3,7 @@ * Linux device driver for RTL8192U * * Based on the r8187 driver, which is: - * Copyright 2004-2005 Andrea Merello , et al. + * Copyright 2004-2005 Andrea Merello , et al. * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h index 7e612aa..dd07a73 100644 --- a/drivers/staging/rtl8192u/r8192U_hw.h +++ b/drivers/staging/rtl8192u/r8192U_hw.h @@ -1,6 +1,6 @@ /* This is part of rtl8187 OpenSource driver. - Copyright (C) Andrea Merello 2004-2005 + Copyright (C) Andrea Merello 2004-2005 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part of the diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c index 3e25763..61f6620 100644 --- a/drivers/staging/rtl8192u/r8192U_wx.c +++ b/drivers/staging/rtl8192u/r8192U_wx.c @@ -2,7 +2,7 @@ This file contains wireless extension handlers. This is part of rtl8180 OpenSource driver. - Copyright (C) Andrea Merello 2004-2005 + Copyright (C) Andrea Merello 2004-2005 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h index 9f6b105..ae7a617 100644 --- a/drivers/staging/rtl8192u/r8192U_wx.h +++ b/drivers/staging/rtl8192u/r8192U_wx.h @@ -1,6 +1,6 @@ /* This is part of rtl8180 OpenSource driver - v 0.3 - Copyright (C) Andrea Merello 2004 + Copyright (C) Andrea Merello 2004 Released under the terms of GPL (General Public Licence) Parts of this driver are based on the GPL part of the official realtek driver -- cgit v0.10.2 From 6e956da2027c767859128b9bfef085cf2a8e233b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 26 Aug 2013 15:18:53 +0200 Subject: rt2800: fix wrong TX power compensation We should not do temperature compensation on devices without EXTERNAL_TX_ALC bit set (called DynamicTxAgcControl on vendor driver). Such devices can have totally bogus TSSI parameters on the EEPROM, but still threaded by us as valid and result doing wrong TX power calculations. This fix inability to connect to AP on slightly longer distance on some Ralink chips/devices. Reported-and-tested-by: Fabien ADAM Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 20243dc..660d7d8 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3408,6 +3408,13 @@ static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) int i; /* + * First check if temperature compensation is supported. + */ + rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); + if (!rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC)) + return 0; + + /* * Read TSSI boundaries for temperature compensation from * the EEPROM. * -- cgit v0.10.2 From 53b2f828487ea7a3f6fa4007b629466fb0d14339 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Aug 2013 11:05:36 -0400 Subject: ath9k: ar9003_eeprom.c:3618 fix variable name typo drivers/net/wireless/ath/ath9k/ar9003_eeprom.c: In function 'ar9003_hw_ant_ctrl_apply': >> drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3618: warning: 'regval' is used uninitialized in this function It seems obvious that 'regval' should have been 'value'... Reported-by: Fengguang Wu Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index a6846ab..f486480 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3615,8 +3615,8 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz) value = ar9003_hw_ant_ctrl_common_2_get(ah, is2ghz); if (AR_SREV_9485(ah) && common->bt_ant_diversity) { - regval &= ~AR_SWITCH_TABLE_COM2_ALL; - regval |= ah->config.ant_ctrl_comm2g_switch_enable; + value &= ~AR_SWITCH_TABLE_COM2_ALL; + value |= ah->config.ant_ctrl_comm2g_switch_enable; } REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value); -- cgit v0.10.2 From a16b635f24a72b798da41fa0814d59018a89c860 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 26 Aug 2013 14:57:34 -0700 Subject: mwifiex: break a long line into two lines It exceeded 80 characters. Split it into two lines. Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c index f69d7e0..21c6882 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/mwifiex/11n_aggr.c @@ -69,7 +69,8 @@ mwifiex_11n_form_amsdu_pkt(struct sk_buff *skb_aggr, memcpy(&tx_header->eth803_hdr, skb_src->data, dt_offset); /* Copy SNAP header */ - snap.snap_type = le16_to_cpu(*(__le16 *) ((u8 *)skb_src->data + dt_offset)); + snap.snap_type = + le16_to_cpu(*(__le16 *) ((u8 *)skb_src->data + dt_offset)); dt_offset += sizeof(u16); memcpy(&tx_header->rfc1042_hdr, &snap, sizeof(struct rfc_1042_hdr)); -- cgit v0.10.2 From 65c1a4de59b0d417d68c04d5ee033058a9e7a83a Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 27 Aug 2013 11:34:26 +0530 Subject: ath9k: Remove unused ANI commands Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 4994bea..be466b0 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -319,9 +319,6 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning) ah->ani_function = 0; } - /* always allow mode (on/off) to be controlled */ - ah->ani_function |= ATH9K_ANI_MODE; - ofdm_nil = max_t(int, ATH9K_ANI_OFDM_DEF_LEVEL, aniState->ofdmNoiseImmunityLevel); cck_nil = max_t(int, ATH9K_ANI_CCK_DEF_LEVEL, diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h index b54a3fb..21e7b83 100644 --- a/drivers/net/wireless/ath/ath9k/ani.h +++ b/drivers/net/wireless/ath/ath9k/ani.h @@ -48,15 +48,10 @@ /* values here are relative to the INI */ enum ath9k_ani_cmd { - ATH9K_ANI_PRESENT = 0x1, - ATH9K_ANI_NOISE_IMMUNITY_LEVEL = 0x2, - ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION = 0x4, - ATH9K_ANI_CCK_WEAK_SIGNAL_THR = 0x8, - ATH9K_ANI_FIRSTEP_LEVEL = 0x10, - ATH9K_ANI_SPUR_IMMUNITY_LEVEL = 0x20, - ATH9K_ANI_MODE = 0x40, - ATH9K_ANI_PHYERR_RESET = 0x80, - ATH9K_ANI_MRC_CCK = 0x100, + ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION = 0x1, + ATH9K_ANI_FIRSTEP_LEVEL = 0x2, + ATH9K_ANI_SPUR_IMMUNITY_LEVEL = 0x4, + ATH9K_ANI_MRC_CCK = 0x8, ATH9K_ANI_ALL = 0xfff }; diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index 1576d58..0865647 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -1160,8 +1160,6 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah, */ WARN_ON(1); break; - case ATH9K_ANI_PRESENT: - break; default: ath_dbg(common, ANI, "invalid cmd %u\n", cmd); return false; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 46b910a..e897648 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1193,8 +1193,6 @@ skip_ws_det: } break; } - case ATH9K_ANI_PRESENT: - break; default: ath_dbg(common, ANI, "invalid cmd %u\n", cmd); return false; diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 2670bf6..ec47c50 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -655,8 +655,6 @@ static int __ath9k_hw_init(struct ath_hw *ah) ath9k_hw_init_cal_settings(ah); ah->ani_function = ATH9K_ANI_ALL; - if (AR_SREV_9280_20_OR_LATER(ah) && !AR_SREV_9300_20_OR_LATER(ah)) - ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL; if (!AR_SREV_9300_20_OR_LATER(ah)) ah->ani_function &= ~ATH9K_ANI_MRC_CCK; -- cgit v0.10.2 From 27251e0087598befb39599eb3dd2a3c59bce2fb9 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 27 Aug 2013 11:34:39 +0530 Subject: ath9k: Enable D3/L1 ASPM fix for AR9462 AR9462 requires this HW fix for ASPM to work properly. Also, since WARegVal is used only for the AR8003 family, use AR_SREV_9300_20_OR_LATER. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index ec47c50..ecc6ec4 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -574,18 +574,17 @@ static int __ath9k_hw_init(struct ath_hw *ah) * We need to do this to avoid RMW of this register. We cannot * read the reg when chip is asleep. */ - ah->WARegVal = REG_READ(ah, AR_WA); - ah->WARegVal |= (AR_WA_D3_L1_DISABLE | - AR_WA_ASPM_TIMER_BASED_DISABLE); + if (AR_SREV_9300_20_OR_LATER(ah)) { + ah->WARegVal = REG_READ(ah, AR_WA); + ah->WARegVal |= (AR_WA_D3_L1_DISABLE | + AR_WA_ASPM_TIMER_BASED_DISABLE); + } if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) { ath_err(common, "Couldn't reset chip\n"); return -EIO; } - if (AR_SREV_9462(ah)) - ah->WARegVal &= ~AR_WA_D3_L1_DISABLE; - if (AR_SREV_9565(ah)) { ah->WARegVal |= AR_WA_BIT22; REG_WRITE(ah, AR_WA, ah->WARegVal); -- cgit v0.10.2 From 708ff0835343c0696e69888943be05efd12fe7c6 Mon Sep 17 00:00:00 2001 From: Masami Ichikawa Date: Wed, 28 Aug 2013 00:37:23 +0900 Subject: rt2800usb: Add WLI-UC-G300HP's Product ID. Support Bufallo WLI-UC-G300HP. Signed-off-by: Masami Ichikawa Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 338034e..96961b9 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -971,6 +971,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0411, 0x016f) }, { USB_DEVICE(0x0411, 0x01a2) }, { USB_DEVICE(0x0411, 0x01ee) }, + { USB_DEVICE(0x0411, 0x01a8) }, /* Corega */ { USB_DEVICE(0x07aa, 0x002f) }, { USB_DEVICE(0x07aa, 0x003c) }, -- cgit v0.10.2 From 7f190230baac602f3f2be8e143c1c7c5aad15b1e Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Tue, 27 Aug 2013 20:17:12 -0400 Subject: cw1200: Display the correct default reference clock. This is purely a cosmetic bug. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/cw1200/main.c b/drivers/net/wireless/cw1200/main.c index 3724e73..090f015 100644 --- a/drivers/net/wireless/cw1200/main.c +++ b/drivers/net/wireless/cw1200/main.c @@ -507,7 +507,7 @@ u32 cw1200_dpll_from_clk(u16 clk_khz) case 0xCB20: /* 52000 KHz */ return 0x07627091; default: - pr_err("Unknown Refclk freq (0x%04x), using 2600KHz\n", + pr_err("Unknown Refclk freq (0x%04x), using 26000KHz\n", clk_khz); return 0x0EC4F121; } -- cgit v0.10.2 From 076f0d20b636ef0e701e21e701c0631b5757b732 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Tue, 27 Aug 2013 20:17:13 -0400 Subject: cw1200: When debug is enabled, display all wakeup conditions for the wait_event_interruptible_timeout() call. When trying to debug an interrupt delivery problem I noticed that not all of the wakeup conditions on the worker thread were included in the debug message. This patch rectifies that. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/cw1200/bh.c b/drivers/net/wireless/cw1200/bh.c index c1ec2a4..92d299a 100644 --- a/drivers/net/wireless/cw1200/bh.c +++ b/drivers/net/wireless/cw1200/bh.c @@ -465,8 +465,8 @@ static int cw1200_bh(void *arg) (rx || tx || term || suspend || priv->bh_error); }), status); - pr_debug("[BH] - rx: %d, tx: %d, term: %d, suspend: %d, status: %ld\n", - rx, tx, term, suspend, status); + pr_debug("[BH] - rx: %d, tx: %d, term: %d, bh_err: %d, suspend: %d, status: %ld\n", + rx, tx, term, suspend, priv->bh_error, status); /* Did an error occur? */ if ((status < 0 && status != -ERESTARTSYS) || -- cgit v0.10.2