From b3daa5ef52c26acd7432c787989bd92d48070c76 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 6 May 2016 16:46:52 +0300 Subject: drm: Add helper for DP++ adaptors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a helper which aids in the identification of DP dual mode (aka. DP++) adaptors. There are several types of adaptors specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors may go as high as 300MHz and they provide a register informing the source device what the actual limit is. Supposedly also type 1 adaptors may optionally implement this register. This TMDS clock limit is the main reason why we need to identify these adaptors. Type 1 adaptors provide access to their internal registers and the sink DDC bus through I2C. Type 2 adaptors provide this access both via I2C and I2C-over-AUX. A type 2 source device may choose to implement either of these methods. If a source device implements the I2C-over-AUX method, then the driver will obviously need specific support for such adaptors since the port is driven like an HDMI port, but DDC communication happes over the AUX channel. This helper should be enough to identify the adaptor type (some type 1 DVI adaptors may be a slight exception) and the maximum TMDS clock limit. Another feature that may be available is control over the TMDS output buffers on the adaptor, possibly allowing for some power saving when the TMDS link is down. Other user controllable features that may be available in the adaptors are downstream i2c bus speed control when using i2c-over-aux, and some control over the CEC pin. I chose not to provide any helper functions for those since I have no use for them in i915 at this time. The rest of the registers in the adaptor are mostly just information, eg. IEEE OUI, hardware and firmware revision, etc. v2: Pass adaptor type to helper functions to ease driver implementation Fix a bunch of typoes (Paulo) Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know the type (Paulo) Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo) Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to ease future LSPCON enabling Remove the unused DP_DUAL_MODE_LAST_RESERVED define v3: Fix kernel doc function argument descriptions (Jani) s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs Add kernel doc for enum drm_dp_dual_mode_type Actually build the docs Fix more typoes v4: Adjust code indentation of type2 adaptor detection (Shashank) Add debug messages for failurs cases (Shashank) v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo) Cc: stable@vger.kernel.org Cc: Tore Anderson Cc: Paulo Zanoni Cc: Shashank Sharma Cc: Daniel Vetter Cc: Shashank Sharma Signed-off-by: Ville Syrjälä Reviewed-by: Shashank Sharma (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1462542412-25533-1-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit ede53344dbfd1dd43bfd73eb6af743d37c56a7c3) Signed-off-by: Jani Nikula diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl index 1464fb2..c248124 100644 --- a/Documentation/DocBook/gpu.tmpl +++ b/Documentation/DocBook/gpu.tmpl @@ -1623,6 +1623,12 @@ void intel_crt_init(struct drm_device *dev) !Edrivers/gpu/drm/drm_dp_helper.c + Display Port Dual Mode Adaptor Helper Functions Reference +!Pdrivers/gpu/drm/drm_dp_dual_mode_helper.c dp dual mode helpers +!Iinclude/drm/drm_dp_dual_mode_helper.h +!Edrivers/gpu/drm/drm_dp_dual_mode_helper.c + + Display Port MST Helper Functions Reference !Pdrivers/gpu/drm/drm_dp_mst_topology.c dp mst helper !Iinclude/drm/drm_dp_mst_helper.h diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 6eb94fc..22228ef 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -23,7 +23,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \ drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \ - drm_kms_helper_common.o + drm_kms_helper_common.o drm_dp_dual_mode_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o diff --git a/drivers/gpu/drm/drm_dp_dual_mode_helper.c b/drivers/gpu/drm/drm_dp_dual_mode_helper.c new file mode 100644 index 0000000..a7b2a75 --- /dev/null +++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c @@ -0,0 +1,366 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include + +/** + * DOC: dp dual mode helpers + * + * Helper functions to deal with DP dual mode (aka. DP++) adaptors. + * + * Type 1: + * Adaptor registers (if any) and the sink DDC bus may be accessed via I2C. + * + * Type 2: + * Adaptor registers and sink DDC bus can be accessed either via I2C or + * I2C-over-AUX. Source devices may choose to implement either of these + * access methods. + */ + +#define DP_DUAL_MODE_SLAVE_ADDRESS 0x40 + +/** + * drm_dp_dual_mode_read - Read from the DP dual mode adaptor register(s) + * @adapter: I2C adapter for the DDC bus + * @offset: register offset + * @buffer: buffer for return data + * @size: sizo of the buffer + * + * Reads @size bytes from the DP dual mode adaptor registers + * starting at @offset. + * + * Returns: + * 0 on success, negative error code on failure + */ +ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter, + u8 offset, void *buffer, size_t size) +{ + struct i2c_msg msgs[] = { + { + .addr = DP_DUAL_MODE_SLAVE_ADDRESS, + .flags = 0, + .len = 1, + .buf = &offset, + }, + { + .addr = DP_DUAL_MODE_SLAVE_ADDRESS, + .flags = I2C_M_RD, + .len = size, + .buf = buffer, + }, + }; + int ret; + + ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + if (ret != ARRAY_SIZE(msgs)) + return -EPROTO; + + return 0; +} +EXPORT_SYMBOL(drm_dp_dual_mode_read); + +/** + * drm_dp_dual_mode_write - Write to the DP dual mode adaptor register(s) + * @adapter: I2C adapter for the DDC bus + * @offset: register offset + * @buffer: buffer for write data + * @size: sizo of the buffer + * + * Writes @size bytes to the DP dual mode adaptor registers + * starting at @offset. + * + * Returns: + * 0 on success, negative error code on failure + */ +ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter, + u8 offset, const void *buffer, size_t size) +{ + struct i2c_msg msg = { + .addr = DP_DUAL_MODE_SLAVE_ADDRESS, + .flags = 0, + .len = 1 + size, + .buf = NULL, + }; + void *data; + int ret; + + data = kmalloc(msg.len, GFP_TEMPORARY); + if (!data) + return -ENOMEM; + + msg.buf = data; + + memcpy(data, &offset, 1); + memcpy(data + 1, buffer, size); + + ret = i2c_transfer(adapter, &msg, 1); + + kfree(data); + + if (ret < 0) + return ret; + if (ret != 1) + return -EPROTO; + + return 0; +} +EXPORT_SYMBOL(drm_dp_dual_mode_write); + +static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN]) +{ + static const char dp_dual_mode_hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] = + "DP-HDMI ADAPTOR\x04"; + + return memcmp(hdmi_id, dp_dual_mode_hdmi_id, + sizeof(dp_dual_mode_hdmi_id)) == 0; +} + +static bool is_type2_adaptor(uint8_t adaptor_id) +{ + return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 | + DP_DUAL_MODE_REV_TYPE2); +} + +/** + * drm_dp_dual_mode_detect - Identify the DP dual mode adaptor + * @adapter: I2C adapter for the DDC bus + * + * Attempt to identify the type of the DP dual mode adaptor used. + * + * Note that when the answer is @DRM_DP_DUAL_MODE_UNKNOWN it's not + * certain whether we're dealing with a native HDMI port or + * a type 1 DVI dual mode adaptor. The driver will have to use + * some other hardware/driver specific mechanism to make that + * distinction. + * + * Returns: + * The type of the DP dual mode adaptor used + */ +enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter) +{ + char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] = {}; + uint8_t adaptor_id = 0x00; + ssize_t ret; + + /* + * Let's see if the adaptor is there the by reading the + * HDMI ID registers. + * + * Note that type 1 DVI adaptors are not required to implemnt + * any registers, and that presents a problem for detection. + * If the i2c transfer is nacked, we may or may not be dealing + * with a type 1 DVI adaptor. Some other mechanism of detecting + * the presence of the adaptor is required. One way would be + * to check the state of the CONFIG1 pin, Another method would + * simply require the driver to know whether the port is a DP++ + * port or a native HDMI port. Both of these methods are entirely + * hardware/driver specific so we can't deal with them here. + */ + ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID, + hdmi_id, sizeof(hdmi_id)); + if (ret) + return DRM_DP_DUAL_MODE_UNKNOWN; + + /* + * Sigh. Some (maybe all?) type 1 adaptors are broken and ack + * the offset but ignore it, and instead they just always return + * data from the start of the HDMI ID buffer. So for a broken + * type 1 HDMI adaptor a single byte read will always give us + * 0x44, and for a type 1 DVI adaptor it should give 0x00 + * (assuming it implements any registers). Fortunately neither + * of those values will match the type 2 signature of the + * DP_DUAL_MODE_ADAPTOR_ID register so we can proceed with + * the type 2 adaptor detection safely even in the presence + * of broken type 1 adaptors. + */ + ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID, + &adaptor_id, sizeof(adaptor_id)); + if (ret == 0) { + if (is_type2_adaptor(adaptor_id)) { + if (is_hdmi_adaptor(hdmi_id)) + return DRM_DP_DUAL_MODE_TYPE2_HDMI; + else + return DRM_DP_DUAL_MODE_TYPE2_DVI; + } + } + + if (is_hdmi_adaptor(hdmi_id)) + return DRM_DP_DUAL_MODE_TYPE1_HDMI; + else + return DRM_DP_DUAL_MODE_TYPE1_DVI; +} +EXPORT_SYMBOL(drm_dp_dual_mode_detect); + +/** + * drm_dp_dual_mode_max_tmds_clock - Max TMDS clock for DP dual mode adaptor + * @type: DP dual mode adaptor type + * @adapter: I2C adapter for the DDC bus + * + * Determine the max TMDS clock the adaptor supports based on the + * type of the dual mode adaptor and the DP_DUAL_MODE_MAX_TMDS_CLOCK + * register (on type2 adaptors). As some type 1 adaptors have + * problems with registers (see comments in drm_dp_dual_mode_detect()) + * we don't read the register on those, instead we simply assume + * a 165 MHz limit based on the specification. + * + * Returns: + * Maximum supported TMDS clock rate for the DP dual mode adaptor in kHz. + */ +int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter) +{ + uint8_t max_tmds_clock; + ssize_t ret; + + /* native HDMI so no limit */ + if (type == DRM_DP_DUAL_MODE_NONE) + return 0; + + /* + * Type 1 adaptors are limited to 165MHz + * Type 2 adaptors can tells us their limit + */ + if (type < DRM_DP_DUAL_MODE_TYPE2_DVI) + return 165000; + + ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_MAX_TMDS_CLOCK, + &max_tmds_clock, sizeof(max_tmds_clock)); + if (ret || max_tmds_clock == 0x00 || max_tmds_clock == 0xff) { + DRM_DEBUG_KMS("Failed to query max TMDS clock\n"); + return 165000; + } + + return max_tmds_clock * 5000 / 2; +} +EXPORT_SYMBOL(drm_dp_dual_mode_max_tmds_clock); + +/** + * drm_dp_dual_mode_get_tmds_output - Get the state of the TMDS output buffers in the DP dual mode adaptor + * @type: DP dual mode adaptor type + * @adapter: I2C adapter for the DDC bus + * @enabled: current state of the TMDS output buffers + * + * Get the state of the TMDS output buffers in the adaptor. For + * type2 adaptors this is queried from the DP_DUAL_MODE_TMDS_OEN + * register. As some type 1 adaptors have problems with registers + * (see comments in drm_dp_dual_mode_detect()) we don't read the + * register on those, instead we simply assume that the buffers + * are always enabled. + * + * Returns: + * 0 on success, negative error code on failure + */ +int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, + bool *enabled) +{ + uint8_t tmds_oen; + ssize_t ret; + + if (type < DRM_DP_DUAL_MODE_TYPE2_DVI) { + *enabled = true; + return 0; + } + + ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_TMDS_OEN, + &tmds_oen, sizeof(tmds_oen)); + if (ret) { + DRM_DEBUG_KMS("Failed to query state of TMDS output buffers\n"); + return ret; + } + + *enabled = !(tmds_oen & DP_DUAL_MODE_TMDS_DISABLE); + + return 0; +} +EXPORT_SYMBOL(drm_dp_dual_mode_get_tmds_output); + +/** + * drm_dp_dual_mode_set_tmds_output - Enable/disable TMDS output buffers in the DP dual mode adaptor + * @type: DP dual mode adaptor type + * @adapter: I2C adapter for the DDC bus + * @enable: enable (as opposed to disable) the TMDS output buffers + * + * Set the state of the TMDS output buffers in the adaptor. For + * type2 this is set via the DP_DUAL_MODE_TMDS_OEN register. As + * some type 1 adaptors have problems with registers (see comments + * in drm_dp_dual_mode_detect()) we avoid touching the register, + * making this function a no-op on type 1 adaptors. + * + * Returns: + * 0 on success, negative error code on failure + */ +int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool enable) +{ + uint8_t tmds_oen = enable ? 0 : DP_DUAL_MODE_TMDS_DISABLE; + ssize_t ret; + + if (type < DRM_DP_DUAL_MODE_TYPE2_DVI) + return 0; + + ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_TMDS_OEN, + &tmds_oen, sizeof(tmds_oen)); + if (ret) { + DRM_DEBUG_KMS("Failed to %s TMDS output buffers\n", + enable ? "enable" : "disable"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_dual_mode_set_tmds_output); + +/** + * drm_dp_get_dual_mode_type_name - Get the name of the DP dual mode adaptor type as a string + * @type: DP dual mode adaptor type + * + * Returns: + * String representation of the DP dual mode adaptor type + */ +const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type) +{ + switch (type) { + case DRM_DP_DUAL_MODE_NONE: + return "none"; + case DRM_DP_DUAL_MODE_TYPE1_DVI: + return "type 1 DVI"; + case DRM_DP_DUAL_MODE_TYPE1_HDMI: + return "type 1 HDMI"; + case DRM_DP_DUAL_MODE_TYPE2_DVI: + return "type 2 DVI"; + case DRM_DP_DUAL_MODE_TYPE2_HDMI: + return "type 2 HDMI"; + default: + WARN_ON(type != DRM_DP_DUAL_MODE_UNKNOWN); + return "unknown"; + } +} +EXPORT_SYMBOL(drm_dp_get_dual_mode_type_name); diff --git a/include/drm/drm_dp_dual_mode_helper.h b/include/drm/drm_dp_dual_mode_helper.h new file mode 100644 index 0000000..e8a9dfd --- /dev/null +++ b/include/drm/drm_dp_dual_mode_helper.h @@ -0,0 +1,92 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_DP_DUAL_MODE_HELPER_H +#define DRM_DP_DUAL_MODE_HELPER_H + +#include + +/* + * Optional for type 1 DVI adaptors + * Mandatory for type 1 HDMI and type 2 adaptors + */ +#define DP_DUAL_MODE_HDMI_ID 0x00 /* 00-0f */ +#define DP_DUAL_MODE_HDMI_ID_LEN 16 +/* + * Optional for type 1 adaptors + * Mandatory for type 2 adaptors + */ +#define DP_DUAL_MODE_ADAPTOR_ID 0x10 +#define DP_DUAL_MODE_REV_MASK 0x07 +#define DP_DUAL_MODE_REV_TYPE2 0x00 +#define DP_DUAL_MODE_TYPE_MASK 0xf0 +#define DP_DUAL_MODE_TYPE_TYPE2 0xa0 +#define DP_DUAL_MODE_IEEE_OUI 0x11 /* 11-13*/ +#define DP_DUAL_IEEE_OUI_LEN 3 +#define DP_DUAL_DEVICE_ID 0x14 /* 14-19 */ +#define DP_DUAL_DEVICE_ID_LEN 6 +#define DP_DUAL_MODE_HARDWARE_REV 0x1a +#define DP_DUAL_MODE_FIRMWARE_MAJOR_REV 0x1b +#define DP_DUAL_MODE_FIRMWARE_MINOR_REV 0x1c +#define DP_DUAL_MODE_MAX_TMDS_CLOCK 0x1d +#define DP_DUAL_MODE_I2C_SPEED_CAP 0x1e +#define DP_DUAL_MODE_TMDS_OEN 0x20 +#define DP_DUAL_MODE_TMDS_DISABLE 0x01 +#define DP_DUAL_MODE_HDMI_PIN_CTRL 0x21 +#define DP_DUAL_MODE_CEC_ENABLE 0x01 +#define DP_DUAL_MODE_I2C_SPEED_CTRL 0x22 + +struct i2c_adapter; + +ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter, + u8 offset, void *buffer, size_t size); +ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter, + u8 offset, const void *buffer, size_t size); + +/** + * enum drm_dp_dual_mode_type - Type of the DP dual mode adaptor + * @DRM_DP_DUAL_MODE_NONE: No DP dual mode adaptor + * @DRM_DP_DUAL_MODE_UNKNOWN: Could be either none or type 1 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE1_DVI: Type 1 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE1_HDMI: Type 1 HDMI adaptor + * @DRM_DP_DUAL_MODE_TYPE2_DVI: Type 2 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE2_HDMI: Type 2 HDMI adaptor + */ +enum drm_dp_dual_mode_type { + DRM_DP_DUAL_MODE_NONE, + DRM_DP_DUAL_MODE_UNKNOWN, + DRM_DP_DUAL_MODE_TYPE1_DVI, + DRM_DP_DUAL_MODE_TYPE1_HDMI, + DRM_DP_DUAL_MODE_TYPE2_DVI, + DRM_DP_DUAL_MODE_TYPE2_HDMI, +}; + +enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter); +int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter); +int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool *enabled); +int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool enable); +const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type); + +#endif -- cgit v0.10.2 From c578d15226c99f0566d5d022f81af6b7d69928db Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 2 May 2016 22:08:23 +0300 Subject: drm/i915: Respect DP++ adaptor TMDS clock limit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni Cc: Shashank Sharma Cc: Daniel Vetter Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma (cherry picked from commit b1ba124d8e95cca48d33502a4a76b1ed09d213ce) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index b9f1304..5699bb6 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -753,6 +754,10 @@ struct cxsr_latency { struct intel_hdmi { i915_reg_t hdmi_reg; int ddc_bus; + struct { + enum drm_dp_dual_mode_type type; + int max_tmds_clock; + } dp_dual_mode; bool limited_color_range; bool color_range_auto; bool has_hdmi_sink; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 2cdab73..dfd895d 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1165,27 +1165,42 @@ static void pch_post_disable_hdmi(struct intel_encoder *encoder) intel_disable_hdmi(encoder); } -static int hdmi_port_clock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit) +static int intel_hdmi_source_max_tmds_clock(struct drm_i915_private *dev_priv) { - struct drm_device *dev = intel_hdmi_to_dev(hdmi); - - if ((respect_dvi_limit && !hdmi->has_hdmi_sink) || IS_G4X(dev)) + if (IS_G4X(dev_priv)) return 165000; - else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8) + else if (IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8) return 300000; else return 225000; } +static int hdmi_port_clock_limit(struct intel_hdmi *hdmi, + bool respect_downstream_limits) +{ + struct drm_device *dev = intel_hdmi_to_dev(hdmi); + int max_tmds_clock = intel_hdmi_source_max_tmds_clock(to_i915(dev)); + + if (respect_downstream_limits) { + if (hdmi->dp_dual_mode.max_tmds_clock) + max_tmds_clock = min(max_tmds_clock, + hdmi->dp_dual_mode.max_tmds_clock); + if (!hdmi->has_hdmi_sink) + max_tmds_clock = min(max_tmds_clock, 165000); + } + + return max_tmds_clock; +} + static enum drm_mode_status hdmi_port_clock_valid(struct intel_hdmi *hdmi, - int clock, bool respect_dvi_limit) + int clock, bool respect_downstream_limits) { struct drm_device *dev = intel_hdmi_to_dev(hdmi); if (clock < 25000) return MODE_CLOCK_LOW; - if (clock > hdmi_port_clock_limit(hdmi, respect_dvi_limit)) + if (clock > hdmi_port_clock_limit(hdmi, respect_downstream_limits)) return MODE_CLOCK_HIGH; /* BXT DPLL can't generate 223-240 MHz */ @@ -1309,7 +1324,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, * within limits. */ if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink && - hdmi_port_clock_valid(intel_hdmi, clock_12bpc, false) == MODE_OK && + hdmi_port_clock_valid(intel_hdmi, clock_12bpc, true) == MODE_OK && hdmi_12bpc_possible(pipe_config)) { DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n"); desired_bpp = 12*3; @@ -1349,10 +1364,35 @@ intel_hdmi_unset_edid(struct drm_connector *connector) intel_hdmi->has_audio = false; intel_hdmi->rgb_quant_range_selectable = false; + intel_hdmi->dp_dual_mode.type = DRM_DP_DUAL_MODE_NONE; + intel_hdmi->dp_dual_mode.max_tmds_clock = 0; + kfree(to_intel_connector(connector)->detect_edid); to_intel_connector(connector)->detect_edid = NULL; } +static void +intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->dev); + struct intel_hdmi *hdmi = intel_attached_hdmi(connector); + struct i2c_adapter *adapter = + intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus); + enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter); + + if (type == DRM_DP_DUAL_MODE_NONE || + type == DRM_DP_DUAL_MODE_UNKNOWN) + return; + + hdmi->dp_dual_mode.type = type; + hdmi->dp_dual_mode.max_tmds_clock = + drm_dp_dual_mode_max_tmds_clock(type, adapter); + + DRM_DEBUG_KMS("DP dual mode adaptor (%s) detected (max TMDS clock: %d kHz)\n", + drm_dp_get_dual_mode_type_name(type), + hdmi->dp_dual_mode.max_tmds_clock); +} + static bool intel_hdmi_set_edid(struct drm_connector *connector, bool force) { @@ -1368,6 +1408,8 @@ intel_hdmi_set_edid(struct drm_connector *connector, bool force) intel_gmbus_get_adapter(dev_priv, intel_hdmi->ddc_bus)); + intel_hdmi_dp_dual_mode_detect(connector); + intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS); } -- cgit v0.10.2 From 0c2fb7c6c8fef2092051192095a7788231ba9a42 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 2 May 2016 22:08:24 +0300 Subject: drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To save a bit of power, let's try to turn off the TMDS output buffers in DP++ adaptors when we're not driving the port. v2: Let's not forget DDI, toss in a debug message while at it v3: Just do the TMDS output control based on adaptor type. With the helper getting passed the type, we wouldn't actually have to check at all in the driver, but the check eliminates the debug output more honest Cc: stable@vger.kernel.org Cc: Tore Anderson Cc: Paulo Zanoni Cc: Shashank Sharma Cc: Daniel Vetter Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma (cherry picked from commit b2ccb822d376d1bbbe5d1f9118d1488b25e6bc6d) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index e30e178..eb59ca1 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1601,6 +1601,12 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) enum port port = intel_ddi_get_encoder_port(intel_encoder); int type = intel_encoder->type; + if (type == INTEL_OUTPUT_HDMI) { + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + + intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); + } + intel_prepare_ddi_buffer(intel_encoder); if (type == INTEL_OUTPUT_EDP) { @@ -1667,6 +1673,12 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder) DPLL_CTRL2_DDI_CLK_OFF(port))); else if (INTEL_INFO(dev)->gen < 9) I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); + + if (type == INTEL_OUTPUT_HDMI) { + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + + intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); + } } static void intel_enable_ddi(struct intel_encoder *intel_encoder) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 5699bb6..0d06113 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1408,6 +1408,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder); bool intel_hdmi_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config); +void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable); /* intel_lvds.c */ diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index dfd895d..75cbaed 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -836,6 +836,22 @@ static void hsw_set_infoframes(struct drm_encoder *encoder, intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode); } +void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable) +{ + struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi)); + struct i2c_adapter *adapter = + intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus); + + if (hdmi->dp_dual_mode.type < DRM_DP_DUAL_MODE_TYPE2_DVI) + return; + + DRM_DEBUG_KMS("%s DP dual mode adaptor TMDS output\n", + enable ? "Enabling" : "Disabling"); + + drm_dp_dual_mode_set_tmds_output(hdmi->dp_dual_mode.type, + adapter, enable); +} + static void intel_hdmi_prepare(struct intel_encoder *encoder) { struct drm_device *dev = encoder->base.dev; @@ -845,6 +861,8 @@ static void intel_hdmi_prepare(struct intel_encoder *encoder) const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode; u32 hdmi_val; + intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); + hdmi_val = SDVO_ENCODING_HDMI; if (!HAS_PCH_SPLIT(dev) && crtc->config->limited_color_range) hdmi_val |= HDMI_COLOR_RANGE_16_235; @@ -1140,6 +1158,8 @@ static void intel_disable_hdmi(struct intel_encoder *encoder) } intel_hdmi->set_infoframes(&encoder->base, false, NULL); + + intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); } static void g4x_disable_hdmi(struct intel_encoder *encoder) -- cgit v0.10.2 From 55d7f30ee1096474cb5bdbca46b60f23ce8b1f83 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 4 May 2016 14:45:22 +0300 Subject: drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DP dual mode type 1 DVI adaptors aren't required to implement any registers, so it's a bit hard to detect them. The best way would be to check the state of the CONFIG1 pin, but we have no way to do that. So as a last resort, check the VBT to see if the HDMI port is in fact a dual mode capable DP port. v2: Deal with VBT code reorganization Deal with DRM_DP_DUAL_MODE_UNKNOWN Reduce DEVICE_TYPE_DP_DUAL_MODE_BITS a bit Accept both DP and HDMI dvo_port in VBT as my BSW at least declare its DP port as HDMI :( v3: Ignore DEVICE_TYPE_NOT_HDMI_OUTPUT (Shashank) Cc: stable@vger.kernel.org Cc: Tore Anderson Reported-by: Tore Anderson Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni Cc: Shashank Sharma Cc: Daniel Vetter Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1462362322-31278-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma (cherry picked from commit d61992565bd3cc5b66d74ed2e96df043c2a207e2) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9d7b54e..2509929 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3482,6 +3482,7 @@ bool intel_bios_is_valid_vbt(const void *buf, size_t size); bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv); bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin); bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port); +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port); bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port); bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv, enum port port); diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index e72dd9a..b235b6e 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1578,6 +1578,42 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port) return false; } +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port) +{ + static const struct { + u16 dp, hdmi; + } port_mapping[] = { + /* + * Buggy VBTs may declare DP ports as having + * HDMI type dvo_port :( So let's check both. + */ + [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, }, + [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, }, + [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, + [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, + }; + int i; + + if (port == PORT_A || port >= ARRAY_SIZE(port_mapping)) + return false; + + if (!dev_priv->vbt.child_dev_num) + return false; + + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { + const union child_device_config *p_child = + &dev_priv->vbt.child_dev[i]; + + if ((p_child->common.dvo_port == port_mapping[port].dp || + p_child->common.dvo_port == port_mapping[port].hdmi) && + (p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) == + (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS)) + return true; + } + + return false; +} + /** * intel_bios_is_dsi_present - is DSI present in VBT * @dev_priv: i915 device instance diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 75cbaed..af3ded1 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1392,16 +1392,38 @@ intel_hdmi_unset_edid(struct drm_connector *connector) } static void -intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector) +intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid) { struct drm_i915_private *dev_priv = to_i915(connector->dev); struct intel_hdmi *hdmi = intel_attached_hdmi(connector); + enum port port = hdmi_to_dig_port(hdmi)->port; struct i2c_adapter *adapter = intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus); enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter); - if (type == DRM_DP_DUAL_MODE_NONE || - type == DRM_DP_DUAL_MODE_UNKNOWN) + /* + * Type 1 DVI adaptors are not required to implement any + * registers, so we can't always detect their presence. + * Ideally we should be able to check the state of the + * CONFIG1 pin, but no such luck on our hardware. + * + * The only method left to us is to check the VBT to see + * if the port is a dual mode capable DP port. But let's + * only do that when we sucesfully read the EDID, to avoid + * confusing log messages about DP dual mode adaptors when + * there's nothing connected to the port. + */ + if (type == DRM_DP_DUAL_MODE_UNKNOWN) { + if (has_edid && + intel_bios_is_port_dp_dual_mode(dev_priv, port)) { + DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n"); + type = DRM_DP_DUAL_MODE_TYPE1_DVI; + } else { + type = DRM_DP_DUAL_MODE_NONE; + } + } + + if (type == DRM_DP_DUAL_MODE_NONE) return; hdmi->dp_dual_mode.type = type; @@ -1428,7 +1450,7 @@ intel_hdmi_set_edid(struct drm_connector *connector, bool force) intel_gmbus_get_adapter(dev_priv, intel_hdmi->ddc_bus)); - intel_hdmi_dp_dual_mode_detect(connector); + intel_hdmi_dp_dual_mode_detect(connector, edid != NULL); intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS); } diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h index 9ff1e96..c15051d 100644 --- a/drivers/gpu/drm/i915/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/intel_vbt_defs.h @@ -740,6 +740,7 @@ struct bdb_psr { #define DEVICE_TYPE_INT_TV 0x1009 #define DEVICE_TYPE_HDMI 0x60D2 #define DEVICE_TYPE_DP 0x68C6 +#define DEVICE_TYPE_DP_DUAL_MODE 0x60D6 #define DEVICE_TYPE_eDP 0x78C6 #define DEVICE_TYPE_CLASS_EXTENSION (1 << 15) @@ -774,6 +775,17 @@ struct bdb_psr { DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ DEVICE_TYPE_ANALOG_OUTPUT) +#define DEVICE_TYPE_DP_DUAL_MODE_BITS \ + (DEVICE_TYPE_INTERNAL_CONNECTOR | \ + DEVICE_TYPE_MIPI_OUTPUT | \ + DEVICE_TYPE_COMPOSITE_OUTPUT | \ + DEVICE_TYPE_LVDS_SINGALING | \ + DEVICE_TYPE_TMDS_DVI_SIGNALING | \ + DEVICE_TYPE_VIDEO_SIGNALING | \ + DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ + DEVICE_TYPE_DIGITAL_OUTPUT | \ + DEVICE_TYPE_ANALOG_OUTPUT) + /* define the DVO port for HDMI output type */ #define DVO_B 1 #define DVO_C 2 -- cgit v0.10.2 From 5fbd0418eef283269f2cc1b90b63d88f20c887bf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 6 May 2016 21:35:55 +0300 Subject: drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move the intel_enable_gtt() call to happen before we touch the GTT during resume. Right now it's done way too late. Before commit ebb7c78d358b ("agp/intel-gtt: Only register fake agp driver for gen1") it was actually done earlier on account of also getting called from the resume hook of the fake agp driver. With the fake agp driver no longer getting registered we must move the call up. The symptoms I've seen on my 830 machine include lowmem corruption, other kinds of memory corruption, and straight up hung machine during or just after resume. Not really sure what causes the memory corruption, but so far I've not seen any with this fix. I think we shouldn't really need to call this during init, but we have been doing that so I've decided to keep the call. However moving that call earlier could be prudent as well. Doing it right after the intel-gtt probe seems appropriate. Also tested this on 946gz,elk,ilk and all seemed quite happy with this change. v2: Reorder init_hw vs. enable_hw functions (Chris) Cc: Daniel Vetter Cc: drm-intel-fixes@lists.freedesktop.org Fixes: ebb7c78d358b ("agp/intel-gtt: Only register fake agp driver for gen1") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1462559755-353-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit ac840ae53573d9f435c88c131f6707a79aecb466) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 5c76150..157af14 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1186,6 +1186,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv) if (ret) return ret; + ret = i915_ggtt_enable_hw(dev); + if (ret) { + DRM_ERROR("failed to enable GGTT\n"); + goto out_ggtt; + } + /* WARNING: Apparently we must kick fbdev drivers before vgacon, * otherwise the vga fbdev driver falls over. */ ret = i915_kick_out_firmware_fb(dev_priv); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 7a0e4d6..dd36760 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -734,9 +734,14 @@ int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state) static int i915_drm_resume(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + int ret; disable_rpm_wakeref_asserts(dev_priv); + ret = i915_ggtt_enable_hw(dev); + if (ret) + DRM_ERROR("failed to re-enable GGTT\n"); + intel_csr_ucode_resume(dev_priv); mutex_lock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a14a983..640c6c1 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4860,9 +4860,6 @@ i915_gem_init_hw(struct drm_device *dev) struct intel_engine_cs *engine; int ret, j; - if (INTEL_INFO(dev)->gen < 6 && !intel_enable_gtt()) - return -EIO; - /* Double layer security blanket, see i915_gem_init() */ intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 0d666b3..92acdff 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -3236,6 +3236,14 @@ out_gtt_cleanup: return ret; } +int i915_ggtt_enable_hw(struct drm_device *dev) +{ + if (INTEL_INFO(dev)->gen < 6 && !intel_enable_gtt()) + return -EIO; + + return 0; +} + void i915_gem_restore_gtt_mappings(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev); diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h index d7dd3d8..0008543 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.h +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h @@ -514,6 +514,7 @@ i915_page_dir_dma_addr(const struct i915_hw_ppgtt *ppgtt, const unsigned n) } int i915_ggtt_init_hw(struct drm_device *dev); +int i915_ggtt_enable_hw(struct drm_device *dev); void i915_gem_init_ggtt(struct drm_device *dev); void i915_ggtt_cleanup_hw(struct drm_device *dev); -- cgit v0.10.2 From e32da7adaf3c511e7e6ffa0d5b680e07201630b8 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 27 Apr 2016 09:02:01 +0100 Subject: drm/i915: Protect gen7 irq_seqno_barrier with uncore lock Faced with sporadic machine hangs on gen7, that mimic the issue of concurrent writes to the same cacheline and seem to start with commit 9b9ed3093613 (drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+), let us restore the spinlock around the mmio read. Fixes: 9b9ed3093613 (drm/i915: Remove forcewake dance from seqno/irq...) Signed-off-by: Chris Wilson Cc: Mika Kuoppala Link: http://patchwork.freedesktop.org/patch/msgid/1461744121-27051-1-git-send-email-chris@chris-wilson.co.uk Tested-by: Mika Kuoppala Reviewed-by: Mika Kuoppala (cherry picked from commit bcbdb6d01150dcc1769ddc9baaaf7f102f27f919) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 245386e..fd93987 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1573,6 +1573,8 @@ pc_render_add_request(struct drm_i915_gem_request *req) static void gen6_seqno_barrier(struct intel_engine_cs *engine) { + struct drm_i915_private *dev_priv = engine->dev->dev_private; + /* Workaround to force correct ordering between irq and seqno writes on * ivb (and maybe also on snb) by reading from a CS register (like * ACTHD) before reading the status page. @@ -1584,9 +1586,13 @@ gen6_seqno_barrier(struct intel_engine_cs *engine) * the write time to land, but that would incur a delay after every * batch i.e. much more frequent than a delay when waiting for the * interrupt (with the same net latency). + * + * Also note that to prevent whole machine hangs on gen7, we have to + * take the spinlock to guard against concurrent cacheline access. */ - struct drm_i915_private *dev_priv = engine->dev->dev_private; + spin_lock_irq(&dev_priv->uncore.lock); POSTING_READ_FW(RING_ACTHD(engine->mmio_base)); + spin_unlock_irq(&dev_priv->uncore.lock); } static u32 -- cgit v0.10.2 From 130b62f74af3600897714045fcab553f01f46df4 Mon Sep 17 00:00:00 2001 From: Ramalingam C Date: Tue, 19 Apr 2016 13:48:13 +0530 Subject: drm/i915/BXT: Retrieving the horizontal timing for DSI Retriving the horizontal timings from the port registers as part of get_config(). This fixes a division by zero: [ 56.916557] divide error: 0000 [#1] PREEMPT SMP [ 56.921741] Modules linked in: i915(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm intel_gtt agpgart cf g80211 rfkill binfmt_misc ax88179_178a kvm_intel kvm irqbypass crc32c_intel efivars tpm_tis tpm fuse [ 56.944106] CPU: 3 PID: 1097 Comm: modprobe Not tainted 4.6.0-rc4+ #433 [ 56.951501] Hardware name: Intel Corp. Broxton M/RVP, BIOS BXT1RVPA.X64.0131.B30.1604142217 04/14/2016 [ 56.961908] task: ffff88007a854d00 ti: ffff88007aea0000 task.ti: ffff88007aea0000 [ 56.970273] RIP: 0010:[] [] drm_mode_hsync+0x22/0x40 [drm] [ 56.980043] RSP: 0018:ffff88007aea3788 EFLAGS: 00010206 [ 56.985982] RAX: 000000000788b600 RBX: ffff880073c22108 RCX: 0000000000000000 [ 56.993957] RDX: 0000000000000000 RSI: ffff88007ab06800 RDI: ffff880073c22108 [ 57.001935] RBP: ffff88007aea3788 R08: 0000000000000001 R09: ffff880073c221e8 [ 57.009903] R10: ffff880073c22108 R11: 0000000000000001 R12: ffff88007a300000 [ 57.017872] R13: ffff880073c22000 R14: ffff880175f78000 R15: ffff880175f78798 [ 57.025849] FS: 00007f105d3e6700(0000) GS:ffff88017fd80000(0000) knlGS:0000000000000000 [ 57.034894] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.041317] CR2: 00007f4d485101d0 CR3: 000000007a820000 CR4: 00000000003406e0 [ 57.049292] Stack: [ 57.051539] ffff88007aea37a0 ffffffffa043b632 ffff880175f787c8 ffff88007aea3810 [ 57.059825] ffffffffa043d59e ffff880175f787b0 ffff88007ab68c00 ffff88007aea37f0 [ 57.068128] ffff880073c221e8 ffff880073c22108 ffff880175f78780 ffff880100000000 [ 57.076430] Call Trace: [ 57.079254] [] intel_mode_from_pipe_config+0x82/0xb0 [i915] [ 57.087405] [] intel_modeset_setup_hw_state+0x55e/0xd60 [i915] [ 57.095847] [] intel_modeset_init+0x8e4/0x1630 [i915] [ 57.103415] [] i915_driver_load+0xbe0/0x1980 [i915] [ 57.110745] [] drm_dev_register+0xa9/0xc0 [drm] [ 57.117681] [] drm_get_pci_dev+0x8d/0x1e0 [drm] [ 57.124600] [] ? _raw_spin_unlock_irqrestore+0x42/0x70 [ 57.132253] [] i915_pci_probe+0x34/0x50 [i915] [ 57.139070] [] local_pci_probe+0x45/0xa0 [ 57.145303] [] ? pci_match_device+0xe0/0x110 [ 57.151924] [] pci_device_probe+0xdb/0x130 [ 57.158355] [] driver_probe_device+0x223/0x440 [ 57.165169] [] __driver_attach+0xd5/0x100 [ 57.171500] [] ? driver_probe_device+0x440/0x440 [ 57.178510] [] bus_for_each_dev+0x66/0xa0 [ 57.184841] [] driver_attach+0x1e/0x20 [ 57.190881] [] bus_add_driver+0x1ee/0x280 [ 57.197212] [] driver_register+0x60/0xe0 [ 57.203447] [] __pci_register_driver+0x60/0x70 [ 57.210285] [] drm_pci_init+0xe0/0x110 [drm] [ 57.216911] [] ? trace_hardirqs_on+0xd/0x10 [ 57.223434] [] ? 0xffffffffa023a000 [ 57.229237] [] i915_init+0x92/0x99 [i915] [ 57.235570] [] do_one_initcall+0xab/0x1d0 [ 57.241900] [] ? rcu_read_lock_sched_held+0x7f/0x90 [ 57.249205] [] ? kmem_cache_alloc_trace+0x248/0x2b0 [ 57.256509] [] ? do_init_module+0x27/0x1d9 [ 57.262934] [] do_init_module+0x5f/0x1d9 [ 57.269167] [] load_module+0x20ef/0x27b0 [ 57.275401] [] ? store_uevent+0x40/0x40 [ 57.281541] [] SYSC_finit_module+0xc3/0xf0 [ 57.287969] [] SyS_finit_module+0xe/0x10 [ 57.294203] [] entry_SYSCALL_64_fastpath+0x1c/0xac [ 57.301406] Code: ff 5d c3 66 0f 1f 44 00 00 0f 1f 44 00 00 8b 87 d8 00 00 00 55 48 89 e5 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 5d c3 [ 57.322964] RIP [] drm_mode_hsync+0x22/0x40 [drm] [ 57.330103] RSP [ 57.334276] ---[ end trace d414224cb2e2a4cf ]--- [ 57.339861] modprobe (1097) used greatest stack depth: 12048 bytes left Fixes: 6f0e7535e7e1 ("drm/i915/BXT: Get pipe conf from the port registers") Signed-off-by: Ramalingam C Acked-by: Imre Deak Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1461053894-5058-1-git-send-email-ramalingam.c@intel.com (cherry picked from commit cefc4e18785123326c5d4d985085e32160fef7f5) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 2b22bb9..efa306b 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -46,6 +46,14 @@ static const struct { }, }; +/* return pixels equvalent to txbyteclkhs */ +static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count, + u16 burst_mode_ratio) +{ + return DIV_ROUND_UP((clk_hs * lane_count * 8 * 100), + (bpp * burst_mode_ratio)); +} + enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt) { /* It just so happens the VBT matches register contents. */ @@ -781,9 +789,10 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder, struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + unsigned int lane_count = intel_dsi->lane_count; unsigned int bpp, fmt; enum port port; - u16 vfp, vsync, vbp; + u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp; /* * Atleast one port is active as encoder->get_config called only if @@ -808,22 +817,43 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder, adjusted_mode->crtc_vtotal = I915_READ(BXT_MIPI_TRANS_VTOTAL(port)); + hactive = adjusted_mode->crtc_hdisplay; + hfp = I915_READ(MIPI_HFP_COUNT(port)); + /* - * TODO: Retrieve hfp, hsync and hbp. Adjust them for dual link and - * calculate hsync_start, hsync_end, htotal and hblank_end + * Meaningful for video mode non-burst sync pulse mode only, + * can be zero for non-burst sync events and burst modes */ + hsync = I915_READ(MIPI_HSYNC_PADDING_COUNT(port)); + hbp = I915_READ(MIPI_HBP_COUNT(port)); + + /* harizontal values are in terms of high speed byte clock */ + hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp = pixels_from_txbyteclkhs(hbp, bpp, lane_count, + intel_dsi->burst_mode_ratio); + + if (intel_dsi->dual_link) { + hfp *= 2; + hsync *= 2; + hbp *= 2; + } /* vertical values are in terms of lines */ vfp = I915_READ(MIPI_VFP_COUNT(port)); vsync = I915_READ(MIPI_VSYNC_PADDING_COUNT(port)); vbp = I915_READ(MIPI_VBP_COUNT(port)); + adjusted_mode->crtc_htotal = hactive + hfp + hsync + hbp; + adjusted_mode->crtc_hsync_start = hfp + adjusted_mode->crtc_hdisplay; + adjusted_mode->crtc_hsync_end = hsync + adjusted_mode->crtc_hsync_start; adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay; + adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal; - adjusted_mode->crtc_vsync_start = - vfp + adjusted_mode->crtc_vdisplay; - adjusted_mode->crtc_vsync_end = - vsync + adjusted_mode->crtc_vsync_start; + adjusted_mode->crtc_vsync_start = vfp + adjusted_mode->crtc_vdisplay; + adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start; adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay; adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal; } -- cgit v0.10.2 From 2bae0304684cab917f348ec411cae600130fa6a9 Mon Sep 17 00:00:00 2001 From: Ander Conselvan de Oliveira Date: Wed, 27 Apr 2016 15:44:16 +0300 Subject: drm/i915: Set crtc_state->lane_count for HDMI Set the lane count for HDMI to 4. This will make it easier to unduplicate CHV phy code. This also fixes the the soft reset programming for HDMI with CHV. After commit a8f327fb8464 ("drm/i915: Clean up CHV lane soft reset programming"), it wouldn't set the right bits for PCS23 since it relied on a lane count that was never set. v2: Set lane_count in *_get_config() to please state checker. (0day) v3: Set lane_count for DDI in DVI mode too. (CI) v4: Add note about CHV soft lane reset. (Ander) Fixes: a8f327fb8464 ("drm/i915: Clean up CHV lane soft reset programming") Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Jim Bride Link: http://patchwork.freedesktop.org/patch/msgid/1461761065-21195-2-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit d4d6279abe9a4a2d52115bad122118db4995df17) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index eb59ca1..a360070 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -2209,8 +2209,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder, if (intel_hdmi->infoframe_enabled(&encoder->base, pipe_config)) pipe_config->has_infoframe = true; - break; + /* fall through */ case TRANS_DDI_MODE_SELECT_DVI: + pipe_config->lane_count = 4; + break; case TRANS_DDI_MODE_SELECT_FDI: break; case TRANS_DDI_MODE_SELECT_DP_SST: diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index af3ded1..2c3bd9c 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -971,6 +971,8 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, dotclock /= pipe_config->pixel_multiplier; pipe_config->base.adjusted_mode.crtc_clock = dotclock; + + pipe_config->lane_count = 4; } static void intel_enable_hdmi_audio(struct intel_encoder *encoder) @@ -1372,6 +1374,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, /* Set user selected PAR to incoming mode's member */ adjusted_mode->picture_aspect_ratio = intel_hdmi->aspect_ratio; + pipe_config->lane_count = 4; + return true; } -- cgit v0.10.2 From 83e538020018e3235f5ec40a1f2dfc673bb5ae3c Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 29 Apr 2016 13:18:23 +0100 Subject: drm/i915: Fix gen8 semaphores id for legacy mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the introduction of a distinct engine->id vs the hardware id, we need to fix up the value we use for selecting the target engine when signaling a semaphore. Note that these values can be merged with engine->guc_id. Fixes: de1add360522c876c25ef2bbbbab1c94bdb509ab Cc: stable@vger.kernel.org # v4.6 Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Reviewed-by: Ville Syrjälä Cc: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1461932305-14637-3-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 215a7e3210eb208abe634480741e418b5a8bf60c) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index fd93987..1160238 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1309,7 +1309,7 @@ static int gen8_rcs_signal(struct drm_i915_gem_request *signaller_req, intel_ring_emit(signaller, seqno); intel_ring_emit(signaller, 0); intel_ring_emit(signaller, MI_SEMAPHORE_SIGNAL | - MI_SEMAPHORE_TARGET(waiter->id)); + MI_SEMAPHORE_TARGET(waiter->hw_id)); intel_ring_emit(signaller, 0); } @@ -1349,7 +1349,7 @@ static int gen8_xcs_signal(struct drm_i915_gem_request *signaller_req, intel_ring_emit(signaller, upper_32_bits(gtt_offset)); intel_ring_emit(signaller, seqno); intel_ring_emit(signaller, MI_SEMAPHORE_SIGNAL | - MI_SEMAPHORE_TARGET(waiter->id)); + MI_SEMAPHORE_TARGET(waiter->hw_id)); intel_ring_emit(signaller, 0); } @@ -2778,6 +2778,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev) engine->name = "render ring"; engine->id = RCS; engine->exec_id = I915_EXEC_RENDER; + engine->hw_id = 0; engine->mmio_base = RENDER_RING_BASE; if (INTEL_INFO(dev)->gen >= 8) { @@ -2929,6 +2930,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev) engine->name = "bsd ring"; engine->id = VCS; engine->exec_id = I915_EXEC_BSD; + engine->hw_id = 1; engine->write_tail = ring_write_tail; if (INTEL_INFO(dev)->gen >= 6) { @@ -3007,6 +3009,7 @@ int intel_init_bsd2_ring_buffer(struct drm_device *dev) engine->name = "bsd2 ring"; engine->id = VCS2; engine->exec_id = I915_EXEC_BSD; + engine->hw_id = 4; engine->write_tail = ring_write_tail; engine->mmio_base = GEN8_BSD2_RING_BASE; @@ -3039,6 +3042,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev) engine->name = "blitter ring"; engine->id = BCS; engine->exec_id = I915_EXEC_BLT; + engine->hw_id = 2; engine->mmio_base = BLT_RING_BASE; engine->write_tail = ring_write_tail; @@ -3098,6 +3102,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev) engine->name = "video enhancement ring"; engine->id = VECS; engine->exec_id = I915_EXEC_VEBOX; + engine->hw_id = 3; engine->mmio_base = VEBOX_RING_BASE; engine->write_tail = ring_write_tail; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index 2ade194..3adce83 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -156,7 +156,8 @@ struct intel_engine_cs { #define I915_NUM_ENGINES 5 #define _VCS(n) (VCS + (n)) unsigned int exec_id; - unsigned int guc_id; + unsigned int hw_id; + unsigned int guc_id; /* XXX same as hw_id? */ u32 mmio_base; struct drm_device *dev; struct intel_ringbuffer *buffer; -- cgit v0.10.2 From 9f7e6f33d4ffe6ab0855e851d964b6aa68451161 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 11 May 2016 22:04:33 +0300 Subject: drm/i915: s/DPPL/DPLL/ for SKL DPLLs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit SKL DPLLs shouldn't be called DPPLs. Cc: Ander Conselvan de Oliveira Fixes: 2edd6443e3d0 ("drm/i915: Use a table to initilize shared dplls") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1462993473-8254-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira (cherry picked from commit d5aab9d40135725cbe81ed5e3af5209382063193) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index 639bf02..3ac7059 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1702,9 +1702,9 @@ static const struct intel_dpll_mgr hsw_pll_mgr = { static const struct dpll_info skl_plls[] = { { "DPLL 0", DPLL_ID_SKL_DPLL0, &skl_ddi_dpll0_funcs, INTEL_DPLL_ALWAYS_ON }, - { "DPPL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs, 0 }, - { "DPPL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs, 0 }, - { "DPPL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs, 0 }, + { "DPLL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs, 0 }, + { "DPLL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs, 0 }, + { "DPLL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs, 0 }, { NULL, -1, NULL, }, }; -- cgit v0.10.2 From 7045c3689f148a0c95f42bae8ef3eb2829ac7de9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 13 May 2016 17:55:17 +0300 Subject: drm/i915: Don't leave old junk in ilk active watermarks on readout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we read out the watermark state from the hardware we're supposed to transfer that into the active watermarks, but currently we fail to any part of the active watermarks that isn't explicitly written. Let's clear it all upfront. Looks like this has been like this since the beginning, when I added the readout. No idea why I didn't clear it up. Cc: Matt Roper Fixes: 243e6a44b9ca ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()") Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Reviewed-by: Matt Roper Signed-off-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1463151318-14719-2-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 15606534bf0a65d8a74a90fd57b8712d147dbca6) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 695a464..f3875bd 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3904,6 +3904,8 @@ static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc) if (IS_HASWELL(dev) || IS_BROADWELL(dev)) hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe)); + memset(active, 0, sizeof(*active)); + active->pipe_enabled = intel_crtc->active; if (active->pipe_enabled) { -- cgit v0.10.2 From 4832aa16c4cdfc750e47c5752a32776f93b6448d Mon Sep 17 00:00:00 2001 From: Ramalingam C Date: Tue, 19 Apr 2016 13:48:14 +0530 Subject: drm/i915/bxt: Adjusting the error in horizontal timings retrieval MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In BXT DSI there is no regs programmed with few horizontal timings in Pixels but txbyteclkhs.. So retrieval process adds some ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs. Actually here for the given adjusted_mode, we are calculating the value programmed to the port and then back to the horizontal timing param in pixels. This is the expected value at the end of get_config, including roundup errors. And if that is same as retrieved value from port, then retrieved (HW state) adjusted_mode's horizontal timings are corrected to match with SW state to nullify the errors. Signed-off-by: Ramalingam C Acked-by: Daniel Vetter Acked-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1461053894-5058-2-git-send-email-ramalingam.c@intel.com (cherry picked from commit 042ab0c3c40be1efcaad6b526173b5536fc6c3bf) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index efa306b..366ad6c 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -46,6 +46,14 @@ static const struct { }, }; +/* return pixels in terms of txbyteclkhs */ +static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count, + u16 burst_mode_ratio) +{ + return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio, + 8 * 100), lane_count); +} + /* return pixels equvalent to txbyteclkhs */ static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count, u16 burst_mode_ratio) @@ -788,11 +796,19 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder, struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + struct drm_display_mode *adjusted_mode_sw; + struct intel_crtc *intel_crtc; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); unsigned int lane_count = intel_dsi->lane_count; unsigned int bpp, fmt; enum port port; u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp; + u16 hfp_sw, hsync_sw, hbp_sw; + u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw, + crtc_hblank_start_sw, crtc_hblank_end_sw; + + intel_crtc = to_intel_crtc(encoder->base.crtc); + adjusted_mode_sw = &intel_crtc->config->base.adjusted_mode; /* * Atleast one port is active as encoder->get_config called only if @@ -856,8 +872,79 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder, adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start; adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay; adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal; -} + /* + * In BXT DSI there is no regs programmed with few horizontal timings + * in Pixels but txbyteclkhs.. So retrieval process adds some + * ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs. + * Actually here for the given adjusted_mode, we are calculating the + * value programmed to the port and then back to the horizontal timing + * param in pixels. This is the expected value, including roundup errors + * And if that is same as retrieved value from port, then + * (HW state) adjusted_mode's horizontal timings are corrected to + * match with SW state to nullify the errors. + */ + /* Calculating the value programmed to the Port register */ + hfp_sw = adjusted_mode_sw->crtc_hsync_start - + adjusted_mode_sw->crtc_hdisplay; + hsync_sw = adjusted_mode_sw->crtc_hsync_end - + adjusted_mode_sw->crtc_hsync_start; + hbp_sw = adjusted_mode_sw->crtc_htotal - + adjusted_mode_sw->crtc_hsync_end; + + if (intel_dsi->dual_link) { + hfp_sw /= 2; + hsync_sw /= 2; + hbp_sw /= 2; + } + + hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + + /* Reverse calculating the adjusted mode parameters from port reg vals*/ + hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + + if (intel_dsi->dual_link) { + hfp_sw *= 2; + hsync_sw *= 2; + hbp_sw *= 2; + } + + crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw + + hsync_sw + hbp_sw; + crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay; + crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw; + crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay; + crtc_hblank_end_sw = crtc_htotal_sw; + + if (adjusted_mode->crtc_htotal == crtc_htotal_sw) + adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal; + + if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw) + adjusted_mode->crtc_hsync_start = + adjusted_mode_sw->crtc_hsync_start; + + if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw) + adjusted_mode->crtc_hsync_end = + adjusted_mode_sw->crtc_hsync_end; + + if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw) + adjusted_mode->crtc_hblank_start = + adjusted_mode_sw->crtc_hblank_start; + + if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw) + adjusted_mode->crtc_hblank_end = + adjusted_mode_sw->crtc_hblank_end; +} static void intel_dsi_get_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) @@ -921,14 +1008,6 @@ static u16 txclkesc(u32 divider, unsigned int us) } } -/* return pixels in terms of txbyteclkhs */ -static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count, - u16 burst_mode_ratio) -{ - return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio, - 8 * 100), lane_count); -} - static void set_dsi_timings(struct drm_encoder *encoder, const struct drm_display_mode *adjusted_mode) { -- cgit v0.10.2 From 03b7b5f983091bca17e9c163832fcde56971d7d1 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 18 May 2016 18:47:11 +0200 Subject: drm/i915/psr: Try to program link training times correctly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The default of 0 is 500us of link training, but that's not enough for some platforms. Decoding this correctly means we're using 2.5ms of link training on these platforms, which fixes flickering issues associated with enabling PSR. v2: Unbotch the math a bit. v3: Drop debug hunk. v4: Improve commit message. Tested-by: Lyude Cc: Lyude Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Cc: Rodrigo Vivi Cc: Sonika Jindal Cc: Durgadoss R Cc: "Pandiyan, Dhinakaran" Tested-by: Ville Syrjälä Reviewed-by: Ville Syrjälä Tested-by: fritsch@kodi.tv Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1463590036-17824-2-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit 50db139018f9c94376d5f4db94a3bae65fdfac14) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c index c3abae4..a788d1e 100644 --- a/drivers/gpu/drm/i915/intel_psr.c +++ b/drivers/gpu/drm/i915/intel_psr.c @@ -280,7 +280,10 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp) * with the 5 or 6 idle patterns. */ uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames); - uint32_t val = 0x0; + uint32_t val = EDP_PSR_ENABLE; + + val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT; + val |= idle_frames << EDP_PSR_IDLE_FRAME_SHIFT; if (IS_HASWELL(dev)) val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES; @@ -288,14 +291,50 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp) if (dev_priv->psr.link_standby) val |= EDP_PSR_LINK_STANDBY; - I915_WRITE(EDP_PSR_CTL, val | - max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT | - idle_frames << EDP_PSR_IDLE_FRAME_SHIFT | - EDP_PSR_ENABLE); + if (dev_priv->vbt.psr.tp1_wakeup_time > 5) + val |= EDP_PSR_TP1_TIME_2500us; + else if (dev_priv->vbt.psr.tp1_wakeup_time > 1) + val |= EDP_PSR_TP1_TIME_500us; + else if (dev_priv->vbt.psr.tp1_wakeup_time > 0) + val |= EDP_PSR_TP1_TIME_100us; + else + val |= EDP_PSR_TP1_TIME_0us; + + if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5) + val |= EDP_PSR_TP2_TP3_TIME_2500us; + else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1) + val |= EDP_PSR_TP2_TP3_TIME_500us; + else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 0) + val |= EDP_PSR_TP2_TP3_TIME_100us; + else + val |= EDP_PSR_TP2_TP3_TIME_0us; + + if (intel_dp_source_supports_hbr2(intel_dp) && + drm_dp_tps3_supported(intel_dp->dpcd)) + val |= EDP_PSR_TP1_TP3_SEL; + else + val |= EDP_PSR_TP1_TP2_SEL; + + I915_WRITE(EDP_PSR_CTL, val); + + if (!dev_priv->psr.psr2_support) + return; + + /* FIXME: selective update is probably totally broken because it doesn't + * mesh at all with our frontbuffer tracking. And the hw alone isn't + * good enough. */ + val = EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE; + + if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5) + val |= EDP_PSR2_TP2_TIME_2500; + else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1) + val |= EDP_PSR2_TP2_TIME_500; + else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 0) + val |= EDP_PSR2_TP2_TIME_100; + else + val |= EDP_PSR2_TP2_TIME_50; - if (dev_priv->psr.psr2_support) - I915_WRITE(EDP_PSR2_CTL, EDP_PSR2_ENABLE | - EDP_SU_TRACK_ENABLE | EDP_PSR2_TP2_TIME_100); + I915_WRITE(EDP_PSR2_CTL, val); } static bool intel_psr_match_conditions(struct intel_dp *intel_dp) -- cgit v0.10.2 From 9bd18728a3f2edee33d4d241d20f394c798fb414 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 13 May 2016 10:10:42 -0700 Subject: drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we resume the watermark register may contain some BIOS leftovers, or just the hardware reset values. We should ignore those as the pipes will be off anyway, and so frobbing around with intermediate watermarks doesn't make much sense. In fact I think we should just throw the skip_intermediate_wm flag out, and instead properly sanitize the "active" watermarks to match the current plane and pipe states. The actual wm state readout might also need a bit of work. But for now, let's continue with the skip_intermediate_wm to keep the fix more minimal. Fixes this sort of errors on resume [drm:ilk_validate_pipe_wm] LP0 watermark invalid [drm:intel_crtc_atomic_check] No valid intermediate pipe watermarks are possible [drm:intel_display_resume [i915]] *ERROR* Restoring old state failed with -22 and a boatload of subsequent modeset BAT fails on my ILK. v2: - Rebase; the SKL atomic WM patches that just landed changed the WM structure fields in intel_crtc_state slightly. (Matt) Cc: Matt Roper Cc: Maarten Lankhorst Fixes: ed4a6a7ca853 ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Signed-off-by: Ville Syrjälä Reviewed-by: Matt Roper Signed-off-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1463159442-20478-1-git-send-email-matthew.d.roper@intel.com (cherry picked from commit e3d5457c7caabb77b3f1d0b09c4a63362e9b04d2) [Jani: rebase on drm-next while cherry-picking] Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ff60241..177c59b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12006,6 +12006,9 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc, DRM_DEBUG_KMS("No valid intermediate pipe watermarks are possible\n"); return ret; } + } else if (dev_priv->display.compute_intermediate_wm) { + if (HAS_PCH_SPLIT(dev_priv) && INTEL_GEN(dev_priv) < 9) + pipe_config->wm.intermediate = pipe_config->wm.optimal.ilk; } if (INTEL_INFO(dev)->gen >= 9) { @@ -15987,6 +15990,9 @@ retry: state->acquire_ctx = &ctx; + /* ignore any reset values/BIOS leftovers in the WM registers */ + to_intel_atomic_state(state)->skip_intermediate_wm = true; + for_each_crtc_in_state(state, crtc, crtc_state, i) { /* * Force recalculation even if we restore -- cgit v0.10.2 From 92dcc67c11d51671cca8df543e25c601e52336ad Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 28 Apr 2016 09:56:46 +0100 Subject: drm/i915: Unify intel_ring_begin() Combine the near identical implementations of intel_logical_ring_begin() and intel_ring_begin() - the only difference is that the logical wait has to check for a matching ring (which is assumed by legacy). In the process some debug messages are culled as there were following a WARN if we hit an actual error. v2: Updated commentary Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Tvrtko Ursulin Reviewed-by: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-12-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 987046ad65361a8b038fbf8d76d152237fb7acf1) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 6179b59..42eac37 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -721,48 +721,6 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request return ret; } -static int logical_ring_wait_for_space(struct drm_i915_gem_request *req, - int bytes) -{ - struct intel_ringbuffer *ringbuf = req->ringbuf; - struct intel_engine_cs *engine = req->engine; - struct drm_i915_gem_request *target; - unsigned space; - int ret; - - if (intel_ring_space(ringbuf) >= bytes) - return 0; - - /* The whole point of reserving space is to not wait! */ - WARN_ON(ringbuf->reserved_in_use); - - list_for_each_entry(target, &engine->request_list, list) { - /* - * The request queue is per-engine, so can contain requests - * from multiple ringbuffers. Here, we must ignore any that - * aren't from the ringbuffer we're considering. - */ - if (target->ringbuf != ringbuf) - continue; - - /* Would completion of this request free enough space? */ - space = __intel_ring_space(target->postfix, ringbuf->tail, - ringbuf->size); - if (space >= bytes) - break; - } - - if (WARN_ON(&target->list == &engine->request_list)) - return -ENOSPC; - - ret = i915_wait_request(target); - if (ret) - return ret; - - ringbuf->space = space; - return 0; -} - /* * intel_logical_ring_advance_and_submit() - advance the tail and submit the workload * @request: Request to advance the logical ringbuffer of. @@ -814,92 +772,6 @@ intel_logical_ring_advance_and_submit(struct drm_i915_gem_request *request) return 0; } -static void __wrap_ring_buffer(struct intel_ringbuffer *ringbuf) -{ - uint32_t __iomem *virt; - int rem = ringbuf->size - ringbuf->tail; - - virt = ringbuf->virtual_start + ringbuf->tail; - rem /= 4; - while (rem--) - iowrite32(MI_NOOP, virt++); - - ringbuf->tail = 0; - intel_ring_update_space(ringbuf); -} - -static int logical_ring_prepare(struct drm_i915_gem_request *req, int bytes) -{ - struct intel_ringbuffer *ringbuf = req->ringbuf; - int remain_usable = ringbuf->effective_size - ringbuf->tail; - int remain_actual = ringbuf->size - ringbuf->tail; - int ret, total_bytes, wait_bytes = 0; - bool need_wrap = false; - - if (ringbuf->reserved_in_use) - total_bytes = bytes; - else - total_bytes = bytes + ringbuf->reserved_size; - - if (unlikely(bytes > remain_usable)) { - /* - * Not enough space for the basic request. So need to flush - * out the remainder and then wait for base + reserved. - */ - wait_bytes = remain_actual + total_bytes; - need_wrap = true; - } else { - if (unlikely(total_bytes > remain_usable)) { - /* - * The base request will fit but the reserved space - * falls off the end. So don't need an immediate wrap - * and only need to effectively wait for the reserved - * size space from the start of ringbuffer. - */ - wait_bytes = remain_actual + ringbuf->reserved_size; - } else if (total_bytes > ringbuf->space) { - /* No wrapping required, just waiting. */ - wait_bytes = total_bytes; - } - } - - if (wait_bytes) { - ret = logical_ring_wait_for_space(req, wait_bytes); - if (unlikely(ret)) - return ret; - - if (need_wrap) - __wrap_ring_buffer(ringbuf); - } - - return 0; -} - -/** - * intel_logical_ring_begin() - prepare the logical ringbuffer to accept some commands - * - * @req: The request to start some new work for - * @num_dwords: number of DWORDs that we plan to write to the ringbuffer. - * - * The ringbuffer might not be ready to accept the commands right away (maybe it needs to - * be wrapped, or wait a bit for the tail to be updated). This function takes care of that - * and also preallocates a request (every workload submission is still mediated through - * requests, same as it did with legacy ringbuffer submission). - * - * Return: non-zero if the ringbuffer is not ready to be written to. - */ -int intel_logical_ring_begin(struct drm_i915_gem_request *req, int num_dwords) -{ - int ret; - - ret = logical_ring_prepare(req, num_dwords * sizeof(uint32_t)); - if (ret) - return ret; - - req->ringbuf->space -= num_dwords * sizeof(uint32_t); - return 0; -} - int intel_logical_ring_reserve_space(struct drm_i915_gem_request *request) { /* @@ -912,7 +784,7 @@ int intel_logical_ring_reserve_space(struct drm_i915_gem_request *request) */ intel_ring_reserved_space_reserve(request->ringbuf, MIN_SPACE_FOR_ADD_REQUEST); - return intel_logical_ring_begin(request, 0); + return intel_ring_begin(request, 0); } /** @@ -982,7 +854,7 @@ int intel_execlists_submission(struct i915_execbuffer_params *params, if (engine == &dev_priv->engine[RCS] && instp_mode != dev_priv->relative_constants_mode) { - ret = intel_logical_ring_begin(params->request, 4); + ret = intel_ring_begin(params->request, 4); if (ret) return ret; @@ -1178,7 +1050,7 @@ static int intel_logical_ring_workarounds_emit(struct drm_i915_gem_request *req) if (ret) return ret; - ret = intel_logical_ring_begin(req, w->count * 2 + 2); + ret = intel_ring_begin(req, w->count * 2 + 2); if (ret) return ret; @@ -1669,7 +1541,7 @@ static int intel_logical_ring_emit_pdps(struct drm_i915_gem_request *req) const int num_lri_cmds = GEN8_LEGACY_PDPES * 2; int i, ret; - ret = intel_logical_ring_begin(req, num_lri_cmds * 2 + 2); + ret = intel_ring_begin(req, num_lri_cmds * 2 + 2); if (ret) return ret; @@ -1716,7 +1588,7 @@ static int gen8_emit_bb_start(struct drm_i915_gem_request *req, req->ctx->ppgtt->pd_dirty_rings &= ~intel_engine_flag(req->engine); } - ret = intel_logical_ring_begin(req, 4); + ret = intel_ring_begin(req, 4); if (ret) return ret; @@ -1778,7 +1650,7 @@ static int gen8_emit_flush(struct drm_i915_gem_request *request, uint32_t cmd; int ret; - ret = intel_logical_ring_begin(request, 4); + ret = intel_ring_begin(request, 4); if (ret) return ret; @@ -1846,7 +1718,7 @@ static int gen8_emit_flush_render(struct drm_i915_gem_request *request, vf_flush_wa = true; } - ret = intel_logical_ring_begin(request, vf_flush_wa ? 12 : 6); + ret = intel_ring_begin(request, vf_flush_wa ? 12 : 6); if (ret) return ret; @@ -1920,7 +1792,7 @@ static int gen8_emit_request(struct drm_i915_gem_request *request) struct intel_ringbuffer *ringbuf = request->ringbuf; int ret; - ret = intel_logical_ring_begin(request, 6 + WA_TAIL_DWORDS); + ret = intel_ring_begin(request, 6 + WA_TAIL_DWORDS); if (ret) return ret; @@ -1944,7 +1816,7 @@ static int gen8_emit_request_render(struct drm_i915_gem_request *request) struct intel_ringbuffer *ringbuf = request->ringbuf; int ret; - ret = intel_logical_ring_begin(request, 8 + WA_TAIL_DWORDS); + ret = intel_ring_begin(request, 8 + WA_TAIL_DWORDS); if (ret) return ret; diff --git a/drivers/gpu/drm/i915/intel_lrc.h b/drivers/gpu/drm/i915/intel_lrc.h index 461f1ef..60a7385 100644 --- a/drivers/gpu/drm/i915/intel_lrc.h +++ b/drivers/gpu/drm/i915/intel_lrc.h @@ -63,7 +63,6 @@ int intel_logical_ring_reserve_space(struct drm_i915_gem_request *request); void intel_logical_ring_stop(struct intel_engine_cs *engine); void intel_logical_ring_cleanup(struct intel_engine_cs *engine); int intel_logical_rings_init(struct drm_device *dev); -int intel_logical_ring_begin(struct drm_i915_gem_request *req, int num_dwords); int logical_ring_flush_all_caches(struct drm_i915_gem_request *req); /** diff --git a/drivers/gpu/drm/i915/intel_mocs.c b/drivers/gpu/drm/i915/intel_mocs.c index 23b8545..6ba4bf7 100644 --- a/drivers/gpu/drm/i915/intel_mocs.c +++ b/drivers/gpu/drm/i915/intel_mocs.c @@ -239,11 +239,9 @@ static int emit_mocs_control_table(struct drm_i915_gem_request *req, if (WARN_ON(table->size > GEN9_NUM_MOCS_ENTRIES)) return -ENODEV; - ret = intel_logical_ring_begin(req, 2 + 2 * GEN9_NUM_MOCS_ENTRIES); - if (ret) { - DRM_DEBUG("intel_logical_ring_begin failed %d\n", ret); + ret = intel_ring_begin(req, 2 + 2 * GEN9_NUM_MOCS_ENTRIES); + if (ret) return ret; - } intel_logical_ring_emit(ringbuf, MI_LOAD_REGISTER_IMM(GEN9_NUM_MOCS_ENTRIES)); @@ -305,11 +303,9 @@ static int emit_mocs_l3cc_table(struct drm_i915_gem_request *req, if (WARN_ON(table->size > GEN9_NUM_MOCS_ENTRIES)) return -ENODEV; - ret = intel_logical_ring_begin(req, 2 + GEN9_NUM_MOCS_ENTRIES); - if (ret) { - DRM_DEBUG("intel_logical_ring_begin failed %d\n", ret); + ret = intel_ring_begin(req, 2 + GEN9_NUM_MOCS_ENTRIES); + if (ret) return ret; - } intel_logical_ring_emit(ringbuf, MI_LOAD_REGISTER_IMM(GEN9_NUM_MOCS_ENTRIES / 2)); diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 1160238..b1d3eb5 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -53,12 +53,6 @@ void intel_ring_update_space(struct intel_ringbuffer *ringbuf) ringbuf->tail, ringbuf->size); } -int intel_ring_space(struct intel_ringbuffer *ringbuf) -{ - intel_ring_update_space(ringbuf); - return ringbuf->space; -} - bool intel_engine_stopped(struct intel_engine_cs *engine) { struct drm_i915_private *dev_priv = engine->dev->dev_private; @@ -2318,51 +2312,6 @@ void intel_cleanup_engine(struct intel_engine_cs *engine) engine->dev = NULL; } -static int ring_wait_for_space(struct intel_engine_cs *engine, int n) -{ - struct intel_ringbuffer *ringbuf = engine->buffer; - struct drm_i915_gem_request *request; - unsigned space; - int ret; - - if (intel_ring_space(ringbuf) >= n) - return 0; - - /* The whole point of reserving space is to not wait! */ - WARN_ON(ringbuf->reserved_in_use); - - list_for_each_entry(request, &engine->request_list, list) { - space = __intel_ring_space(request->postfix, ringbuf->tail, - ringbuf->size); - if (space >= n) - break; - } - - if (WARN_ON(&request->list == &engine->request_list)) - return -ENOSPC; - - ret = i915_wait_request(request); - if (ret) - return ret; - - ringbuf->space = space; - return 0; -} - -static void __wrap_ring_buffer(struct intel_ringbuffer *ringbuf) -{ - uint32_t __iomem *virt; - int rem = ringbuf->size - ringbuf->tail; - - virt = ringbuf->virtual_start + ringbuf->tail; - rem /= 4; - while (rem--) - iowrite32(MI_NOOP, virt++); - - ringbuf->tail = 0; - intel_ring_update_space(ringbuf); -} - int intel_engine_idle(struct intel_engine_cs *engine) { struct drm_i915_gem_request *req; @@ -2404,63 +2353,82 @@ int intel_ring_reserve_space(struct drm_i915_gem_request *request) void intel_ring_reserved_space_reserve(struct intel_ringbuffer *ringbuf, int size) { - WARN_ON(ringbuf->reserved_size); - WARN_ON(ringbuf->reserved_in_use); - + GEM_BUG_ON(ringbuf->reserved_size); ringbuf->reserved_size = size; } void intel_ring_reserved_space_cancel(struct intel_ringbuffer *ringbuf) { - WARN_ON(ringbuf->reserved_in_use); - + GEM_BUG_ON(!ringbuf->reserved_size); ringbuf->reserved_size = 0; - ringbuf->reserved_in_use = false; } void intel_ring_reserved_space_use(struct intel_ringbuffer *ringbuf) { - WARN_ON(ringbuf->reserved_in_use); - - ringbuf->reserved_in_use = true; - ringbuf->reserved_tail = ringbuf->tail; + GEM_BUG_ON(!ringbuf->reserved_size); + ringbuf->reserved_size = 0; } void intel_ring_reserved_space_end(struct intel_ringbuffer *ringbuf) { - WARN_ON(!ringbuf->reserved_in_use); - if (ringbuf->tail > ringbuf->reserved_tail) { - WARN(ringbuf->tail > ringbuf->reserved_tail + ringbuf->reserved_size, - "request reserved size too small: %d vs %d!\n", - ringbuf->tail - ringbuf->reserved_tail, ringbuf->reserved_size); - } else { + GEM_BUG_ON(ringbuf->reserved_size); +} + +static int wait_for_space(struct drm_i915_gem_request *req, int bytes) +{ + struct intel_ringbuffer *ringbuf = req->ringbuf; + struct intel_engine_cs *engine = req->engine; + struct drm_i915_gem_request *target; + + intel_ring_update_space(ringbuf); + if (ringbuf->space >= bytes) + return 0; + + /* + * Space is reserved in the ringbuffer for finalising the request, + * as that cannot be allowed to fail. During request finalisation, + * reserved_space is set to 0 to stop the overallocation and the + * assumption is that then we never need to wait (which has the + * risk of failing with EINTR). + * + * See also i915_gem_request_alloc() and i915_add_request(). + */ + GEM_BUG_ON(!ringbuf->reserved_size); + + list_for_each_entry(target, &engine->request_list, list) { + unsigned space; + /* - * The ring was wrapped while the reserved space was in use. - * That means that some unknown amount of the ring tail was - * no-op filled and skipped. Thus simply adding the ring size - * to the tail and doing the above space check will not work. - * Rather than attempt to track how much tail was skipped, - * it is much simpler to say that also skipping the sanity - * check every once in a while is not a big issue. + * The request queue is per-engine, so can contain requests + * from multiple ringbuffers. Here, we must ignore any that + * aren't from the ringbuffer we're considering. */ + if (target->ringbuf != ringbuf) + continue; + + /* Would completion of this request free enough space? */ + space = __intel_ring_space(target->postfix, ringbuf->tail, + ringbuf->size); + if (space >= bytes) + break; } - ringbuf->reserved_size = 0; - ringbuf->reserved_in_use = false; + if (WARN_ON(&target->list == &engine->request_list)) + return -ENOSPC; + + return i915_wait_request(target); } -static int __intel_ring_prepare(struct intel_engine_cs *engine, int bytes) +int intel_ring_begin(struct drm_i915_gem_request *req, int num_dwords) { - struct intel_ringbuffer *ringbuf = engine->buffer; - int remain_usable = ringbuf->effective_size - ringbuf->tail; + struct intel_ringbuffer *ringbuf = req->ringbuf; int remain_actual = ringbuf->size - ringbuf->tail; - int ret, total_bytes, wait_bytes = 0; + int remain_usable = ringbuf->effective_size - ringbuf->tail; + int bytes = num_dwords * sizeof(u32); + int total_bytes, wait_bytes; bool need_wrap = false; - if (ringbuf->reserved_in_use) - total_bytes = bytes; - else - total_bytes = bytes + ringbuf->reserved_size; + total_bytes = bytes + ringbuf->reserved_size; if (unlikely(bytes > remain_usable)) { /* @@ -2469,44 +2437,40 @@ static int __intel_ring_prepare(struct intel_engine_cs *engine, int bytes) */ wait_bytes = remain_actual + total_bytes; need_wrap = true; + } else if (unlikely(total_bytes > remain_usable)) { + /* + * The base request will fit but the reserved space + * falls off the end. So we don't need an immediate wrap + * and only need to effectively wait for the reserved + * size space from the start of ringbuffer. + */ + wait_bytes = remain_actual + ringbuf->reserved_size; } else { - if (unlikely(total_bytes > remain_usable)) { - /* - * The base request will fit but the reserved space - * falls off the end. So don't need an immediate wrap - * and only need to effectively wait for the reserved - * size space from the start of ringbuffer. - */ - wait_bytes = remain_actual + ringbuf->reserved_size; - } else if (total_bytes > ringbuf->space) { - /* No wrapping required, just waiting. */ - wait_bytes = total_bytes; - } + /* No wrapping required, just waiting. */ + wait_bytes = total_bytes; } - if (wait_bytes) { - ret = ring_wait_for_space(engine, wait_bytes); + if (wait_bytes > ringbuf->space) { + int ret = wait_for_space(req, wait_bytes); if (unlikely(ret)) return ret; - if (need_wrap) - __wrap_ring_buffer(ringbuf); + intel_ring_update_space(ringbuf); } - return 0; -} + if (unlikely(need_wrap)) { + GEM_BUG_ON(remain_actual > ringbuf->space); + GEM_BUG_ON(ringbuf->tail + remain_actual > ringbuf->size); -int intel_ring_begin(struct drm_i915_gem_request *req, - int num_dwords) -{ - struct intel_engine_cs *engine = req->engine; - int ret; - - ret = __intel_ring_prepare(engine, num_dwords * sizeof(uint32_t)); - if (ret) - return ret; + /* Fill the tail with MI_NOOP */ + memset(ringbuf->virtual_start + ringbuf->tail, + 0, remain_actual); + ringbuf->tail = 0; + ringbuf->space -= remain_actual; + } - engine->buffer->space -= num_dwords * sizeof(uint32_t); + ringbuf->space -= bytes; + GEM_BUG_ON(ringbuf->space < 0); return 0; } diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index 3adce83..ff12648 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -108,8 +108,6 @@ struct intel_ringbuffer { int size; int effective_size; int reserved_size; - int reserved_tail; - bool reserved_in_use; /** We track the position of the requests in the ring buffer, and * when each is retired we increment last_retired_head as the GPU @@ -460,7 +458,6 @@ static inline void intel_ring_advance(struct intel_engine_cs *engine) } int __intel_ring_space(int head, int tail, int size); void intel_ring_update_space(struct intel_ringbuffer *ringbuf); -int intel_ring_space(struct intel_ringbuffer *ringbuf); bool intel_engine_stopped(struct intel_engine_cs *engine); int __must_check intel_engine_idle(struct intel_engine_cs *engine); -- cgit v0.10.2 From 157d2c7fad0863222f6f3b11c4690f2a6e74d809 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 13 May 2016 11:57:22 +0100 Subject: drm/i915: Stop automatically retiring requests after a GPU hang Following a GPU hang, we break out of the request loop in order to unlock the struct_mutex for use by the GPU reset. However, if we retire all the requests at that moment, we cannot identify the guilty request after performing the reset. v2: Not automatically retiring requests forces us to recheck for available ringspace. Fixes: f4457ae71fd6 ("drm/i915: Prevent leaking of -EIO from i915_wait_request()") Testcase: igt/gem_reset_stats/ban-* Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Mika Kuoppala Tested-by: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: http://patchwork.freedesktop.org/patch/msgid/1463137042-9669-4-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit e075a32f515becef66dc849f5eca47409ccf5473) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 640c6c1..5677c4b 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1456,7 +1456,10 @@ i915_wait_request(struct drm_i915_gem_request *req) if (ret) return ret; - __i915_gem_request_retire__upto(req); + /* If the GPU hung, we want to keep the requests to find the guilty. */ + if (req->reset_counter == i915_reset_counter(&dev_priv->gpu_error)) + __i915_gem_request_retire__upto(req); + return 0; } @@ -1513,7 +1516,8 @@ i915_gem_object_retire_request(struct drm_i915_gem_object *obj, else if (obj->last_write_req == req) i915_gem_object_retire__write(obj); - __i915_gem_request_retire__upto(req); + if (req->reset_counter == i915_reset_counter(&req->i915->gpu_error)) + __i915_gem_request_retire__upto(req); } /* A nonblocking variant of the above wait. This is a highly dangerous routine diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index b1d3eb5..04402bb 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -2456,6 +2456,8 @@ int intel_ring_begin(struct drm_i915_gem_request *req, int num_dwords) return ret; intel_ring_update_space(ringbuf); + if (unlikely(ringbuf->space < wait_bytes)) + return -EAGAIN; } if (unlikely(need_wrap)) { -- cgit v0.10.2