From 9e4808d2c6a6660d5d2cd572e689570df14a8472 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.ab@samsung.com>
Date: Fri, 20 Nov 2015 16:07:51 +0530
Subject: mfd: sec: Add support for S2MPS15 PMIC

Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
clock outputs and battery charger. This patch adds initial support for
LDO and buck regulators of S2MPS15 device.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[Alim: Added s2mps15_devs like rtc and clk and related changes]
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 989076d..7c4e7be 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -29,6 +29,7 @@
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
 #include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
 #include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
@@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
 	}
 };
 
+static const struct mfd_cell s2mps15_devs[] = {
+	{
+		.name = "s2mps15-regulator",
+	}, {
+		.name = "s2mps15-rtc",
+	}, {
+		.name = "s2mps13-clk",
+		.of_compatible = "samsung,s2mps13-clk",
+	},
+};
+
 static const struct mfd_cell s2mpa01_devs[] = {
 	{
 		.name = "s2mpa01-pmic",
@@ -122,6 +134,9 @@ static const struct of_device_id sec_dt_match[] = {
 		.compatible = "samsung,s2mps14-pmic",
 		.data = (void *)S2MPS14X,
 	}, {
+		.compatible = "samsung,s2mps15-pmic",
+		.data = (void *)S2MPS15X,
+	}, {
 		.compatible = "samsung,s2mpa01-pmic",
 		.data = (void *)S2MPA01,
 	}, {
@@ -223,6 +238,15 @@ static const struct regmap_config s2mps14_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config s2mps15_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS15_REG_LDODSCH4,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s2mpu02_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -384,6 +408,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	case S2MPS14X:
 		regmap = &s2mps14_regmap_config;
 		break;
+	case S2MPS15X:
+		regmap = &s2mps15_regmap_config;
+		break;
 	case S5M8763X:
 		regmap = &s5m8763_regmap_config;
 		break;
@@ -442,6 +469,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		sec_devs = s2mps14_devs;
 		num_sec_devs = ARRAY_SIZE(s2mps14_devs);
 		break;
+	case S2MPS15X:
+		sec_devs = s2mps15_devs;
+		num_sec_devs = ARRAY_SIZE(s2mps15_devs);
+		break;
 	case S2MPU02:
 		sec_devs = s2mpu02_devs;
 		num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 806fa8d..d77de43 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -407,6 +407,11 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
 	S2MPS1X_IRQ_CHIP_COMMON_DATA,
 };
 
+static const struct regmap_irq_chip s2mps15_irq_chip = {
+	.name = "s2mps15",
+	S2MPS1X_IRQ_CHIP_COMMON_DATA,
+};
+
 static const struct regmap_irq_chip s2mpu02_irq_chip = {
 	.name = "s2mpu02",
 	.irqs = s2mpu02_irqs,
@@ -466,6 +471,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 	case S2MPS14X:
 		sec_irq_chip = &s2mps14_irq_chip;
 		break;
+	case S2MPS15X:
+		sec_irq_chip = &s2mps15_irq_chip;
+		break;
 	case S2MPU02:
 		sec_irq_chip = &s2mpu02_irq_chip;
 		break;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index a060986..6bc4bcd 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -44,6 +44,7 @@ enum sec_device_type {
 	S2MPS11X,
 	S2MPS13X,
 	S2MPS14X,
+	S2MPS15X,
 	S2MPU02,
 };
 
diff --git a/include/linux/mfd/samsung/s2mps15.h b/include/linux/mfd/samsung/s2mps15.h
new file mode 100644
index 0000000..36d3528
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mps15.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_S2MPS15_H
+#define __LINUX_MFD_S2MPS15_H
+
+/* S2MPS15 registers */
+enum s2mps15_reg {
+	S2MPS15_REG_ID,
+	S2MPS15_REG_INT1,
+	S2MPS15_REG_INT2,
+	S2MPS15_REG_INT3,
+	S2MPS15_REG_INT1M,
+	S2MPS15_REG_INT2M,
+	S2MPS15_REG_INT3M,
+	S2MPS15_REG_ST1,
+	S2MPS15_REG_ST2,
+	S2MPS15_REG_PWRONSRC,
+	S2MPS15_REG_OFFSRC,
+	S2MPS15_REG_BU_CHG,
+	S2MPS15_REG_RTC_BUF,
+	S2MPS15_REG_CTRL1,
+	S2MPS15_REG_CTRL2,
+	S2MPS15_REG_RSVD1,
+	S2MPS15_REG_RSVD2,
+	S2MPS15_REG_RSVD3,
+	S2MPS15_REG_RSVD4,
+	S2MPS15_REG_RSVD5,
+	S2MPS15_REG_RSVD6,
+	S2MPS15_REG_CTRL3,
+	S2MPS15_REG_RSVD7,
+	S2MPS15_REG_RSVD8,
+	S2MPS15_REG_RSVD9,
+	S2MPS15_REG_B1CTRL1,
+	S2MPS15_REG_B1CTRL2,
+	S2MPS15_REG_B2CTRL1,
+	S2MPS15_REG_B2CTRL2,
+	S2MPS15_REG_B3CTRL1,
+	S2MPS15_REG_B3CTRL2,
+	S2MPS15_REG_B4CTRL1,
+	S2MPS15_REG_B4CTRL2,
+	S2MPS15_REG_B5CTRL1,
+	S2MPS15_REG_B5CTRL2,
+	S2MPS15_REG_B6CTRL1,
+	S2MPS15_REG_B6CTRL2,
+	S2MPS15_REG_B7CTRL1,
+	S2MPS15_REG_B7CTRL2,
+	S2MPS15_REG_B8CTRL1,
+	S2MPS15_REG_B8CTRL2,
+	S2MPS15_REG_B9CTRL1,
+	S2MPS15_REG_B9CTRL2,
+	S2MPS15_REG_B10CTRL1,
+	S2MPS15_REG_B10CTRL2,
+	S2MPS15_REG_BBCTRL1,
+	S2MPS15_REG_BBCTRL2,
+	S2MPS15_REG_BRAMP,
+	S2MPS15_REG_LDODVS1,
+	S2MPS15_REG_LDODVS2,
+	S2MPS15_REG_LDODVS3,
+	S2MPS15_REG_LDODVS4,
+	S2MPS15_REG_L1CTRL,
+	S2MPS15_REG_L2CTRL,
+	S2MPS15_REG_L3CTRL,
+	S2MPS15_REG_L4CTRL,
+	S2MPS15_REG_L5CTRL,
+	S2MPS15_REG_L6CTRL,
+	S2MPS15_REG_L7CTRL,
+	S2MPS15_REG_L8CTRL,
+	S2MPS15_REG_L9CTRL,
+	S2MPS15_REG_L10CTRL,
+	S2MPS15_REG_L11CTRL,
+	S2MPS15_REG_L12CTRL,
+	S2MPS15_REG_L13CTRL,
+	S2MPS15_REG_L14CTRL,
+	S2MPS15_REG_L15CTRL,
+	S2MPS15_REG_L16CTRL,
+	S2MPS15_REG_L17CTRL,
+	S2MPS15_REG_L18CTRL,
+	S2MPS15_REG_L19CTRL,
+	S2MPS15_REG_L20CTRL,
+	S2MPS15_REG_L21CTRL,
+	S2MPS15_REG_L22CTRL,
+	S2MPS15_REG_L23CTRL,
+	S2MPS15_REG_L24CTRL,
+	S2MPS15_REG_L25CTRL,
+	S2MPS15_REG_L26CTRL,
+	S2MPS15_REG_L27CTRL,
+	S2MPS15_REG_LDODSCH1,
+	S2MPS15_REG_LDODSCH2,
+	S2MPS15_REG_LDODSCH3,
+	S2MPS15_REG_LDODSCH4,
+};
+
+/* S2MPS15 regulator ids */
+enum s2mps15_regulators {
+	S2MPS15_LDO1,
+	S2MPS15_LDO2,
+	S2MPS15_LDO3,
+	S2MPS15_LDO4,
+	S2MPS15_LDO5,
+	S2MPS15_LDO6,
+	S2MPS15_LDO7,
+	S2MPS15_LDO8,
+	S2MPS15_LDO9,
+	S2MPS15_LDO10,
+	S2MPS15_LDO11,
+	S2MPS15_LDO12,
+	S2MPS15_LDO13,
+	S2MPS15_LDO14,
+	S2MPS15_LDO15,
+	S2MPS15_LDO16,
+	S2MPS15_LDO17,
+	S2MPS15_LDO18,
+	S2MPS15_LDO19,
+	S2MPS15_LDO20,
+	S2MPS15_LDO21,
+	S2MPS15_LDO22,
+	S2MPS15_LDO23,
+	S2MPS15_LDO24,
+	S2MPS15_LDO25,
+	S2MPS15_LDO26,
+	S2MPS15_LDO27,
+	S2MPS15_BUCK1,
+	S2MPS15_BUCK2,
+	S2MPS15_BUCK3,
+	S2MPS15_BUCK4,
+	S2MPS15_BUCK5,
+	S2MPS15_BUCK6,
+	S2MPS15_BUCK7,
+	S2MPS15_BUCK8,
+	S2MPS15_BUCK9,
+	S2MPS15_BUCK10,
+	S2MPS15_BUCK11,
+	S2MPS15_REGULATOR_MAX,
+};
+
+#define S2MPS15_LDO_VSEL_MASK		(0x3F)
+#define S2MPS15_BUCK_VSEL_MASK		(0xFF)
+
+#define S2MPS15_ENABLE_SHIFT		(0x06)
+#define S2MPS15_ENABLE_MASK		(0x03 << S2MPS15_ENABLE_SHIFT)
+
+#define S2MPS15_LDO_N_VOLTAGES		(S2MPS15_LDO_VSEL_MASK + 1)
+#define S2MPS15_BUCK_N_VOLTAGES	(S2MPS15_BUCK_VSEL_MASK + 1)
+
+#endif /* __LINUX_MFD_S2MPS15_H */
-- 
cgit v0.10.2


From 51af20675800ffbd97bd48363a06e00f83de44c4 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.ab@samsung.com>
Date: Fri, 20 Nov 2015 16:07:52 +0530
Subject: regulator: s2mps11: Add support for S2MPS15 regulators

The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
27 LDO and 10 Buck regulators and allows programming these regulators via a
I2C interface. This patch adds initial support for LDO/Buck regulators of
S2MPS15 PMIC.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8df0b0e..2805b01 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -588,10 +588,10 @@ config REGULATOR_S2MPA01
 	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 
 config REGULATOR_S2MPS11
-	tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
+	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
 	depends on MFD_SEC_CORE
 	help
-	 This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
+	 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
 	 output regulator via I2C bus. The chip is comprised of high efficient
 	 Buck converters including Dual-Phase Buck converter, Buck-Boost
 	 converter, various LDOs.
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 72fc3c3..b2f3a28 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -32,6 +32,7 @@
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
 #include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
 #include <linux/mfd/samsung/s2mpu02.h>
 
 /* The highest number of possible regulators for supported devices. */
@@ -661,6 +662,133 @@ static const struct regulator_desc s2mps14_regulators[] = {
 				    S2MPS14_BUCK1235_START_SEL),
 };
 
+static struct regulator_ops s2mps15_reg_ldo_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops s2mps15_reg_buck_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+};
+
+#define regulator_desc_s2mps15_ldo(num, range) {	\
+	.name		= "LDO"#num,			\
+	.id		= S2MPS15_LDO##num,		\
+	.ops		= &s2mps15_reg_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.linear_ranges	= range,			\
+	.n_linear_ranges = ARRAY_SIZE(range),		\
+	.n_voltages	= S2MPS15_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPS15_REG_L1CTRL + num - 1,	\
+	.vsel_mask	= S2MPS15_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPS15_REG_L1CTRL + num - 1,	\
+	.enable_mask	= S2MPS15_ENABLE_MASK		\
+}
+
+#define regulator_desc_s2mps15_buck(num, range) {			\
+	.name		= "BUCK"#num,					\
+	.id		= S2MPS15_BUCK##num,				\
+	.ops		= &s2mps15_reg_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,				\
+	.owner		= THIS_MODULE,					\
+	.linear_ranges	= range,					\
+	.n_linear_ranges = ARRAY_SIZE(range),				\
+	.ramp_delay	= 12500,					\
+	.n_voltages	= S2MPS15_BUCK_N_VOLTAGES,			\
+	.vsel_reg	= S2MPS15_REG_B1CTRL2 + ((num - 1) * 2),	\
+	.vsel_mask	= S2MPS15_BUCK_VSEL_MASK,			\
+	.enable_reg	= S2MPS15_REG_B1CTRL1 + ((num - 1) * 2),	\
+	.enable_mask	= S2MPS15_ENABLE_MASK				\
+}
+
+/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
+};
+
+/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
+	REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
+};
+
+/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
+};
+
+/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000),
+};
+
+/* voltage range for s2mps15 LDO 1 */
+static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
+};
+
+/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
+static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250),
+};
+
+/* voltage range for s2mps15 BUCK 8, 9 and 10 */
+static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500),
+};
+
+static const struct regulator_desc s2mps15_regulators[] = {
+	regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5),
+	regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2),
+	regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1),
+	regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3),
+	regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1),
+	regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2),
+	regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4),
+	regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4),
+	regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4),
+	regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4),
+	regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3),
+	regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3),
+	regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3),
+	regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2),
+	regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1),
+	regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1),
+	regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2),
+	regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1),
+	regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2),
+	regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1),
+	regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2),
+	regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3),
+	regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1),
+	regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2),
+	regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2),
+	regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3),
+	regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1),
+	regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1),
+	regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1),
+	regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1),
+	regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1),
+	regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1),
+	regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1),
+	regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1),
+	regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2),
+	regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2),
+	regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2),
+};
+
 static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
 		struct regulator_dev *rdev)
 {
@@ -974,6 +1102,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 		regulators = s2mps14_regulators;
 		BUILD_BUG_ON(S2MPS_REGULATOR_MAX < s2mps11->rdev_num);
 		break;
+	case S2MPS15X:
+		s2mps11->rdev_num = ARRAY_SIZE(s2mps15_regulators);
+		regulators = s2mps15_regulators;
+		break;
 	case S2MPU02:
 		s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
 		regulators = s2mpu02_regulators;
@@ -1070,6 +1202,7 @@ static const struct platform_device_id s2mps11_pmic_id[] = {
 	{ "s2mps11-pmic", S2MPS11X},
 	{ "s2mps13-pmic", S2MPS13X},
 	{ "s2mps14-pmic", S2MPS14X},
+	{ "s2mps15-regulator", S2MPS15X},
 	{ "s2mpu02-pmic", S2MPU02},
 	{ },
 };
@@ -1097,5 +1230,5 @@ module_exit(s2mps11_pmic_exit);
 
 /* Module information */
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
-MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPU02 Regulator Driver");
+MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
 MODULE_LICENSE("GPL");
-- 
cgit v0.10.2


From a65e5efa7c5faa8c320fe56cc351d47fcd006749 Mon Sep 17 00:00:00 2001
From: Alim Akhtar <alim.akhtar@samsung.com>
Date: Fri, 20 Nov 2015 16:07:53 +0530
Subject: rtc: s5m.c: Add support for S2MPS15 RTC

RTC found in s2mps15 is almost same as one found on s2mps13
with few differences in RTC_UPDATE register fields, like:
1> Bit[4] and Bit[1] are reversed
   - On s2mps13
          WUDR -> bit[4], AUDR -> bit[1]
   - On s2mps15
	  WUDR -> bit[1], AUDR -> bit[4]
2> In case of s2mps13, for alarm register, need to set both
   WDUR and ADUR high, whereas for s2mps15 only set AUDR to high.
3> On s2mps15, WUDR, RUDR and AUDR functions should never be used
   at the same time.

This patch add required changes to enable s2mps15 rtc timer.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index f2504b4..0d68a85 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -188,6 +188,7 @@ static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
 		ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
 		val &= S5M_ALARM0_STATUS;
 		break;
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2,
@@ -219,9 +220,22 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
 		return ret;
 	}
 
-	data |= info->regs->rtc_udr_mask;
-	if (info->device_type == S5M8763X || info->device_type == S5M8767X)
-		data |= S5M_RTC_TIME_EN_MASK;
+	switch (info->device_type) {
+	case S5M8763X:
+	case S5M8767X:
+		data |= info->regs->rtc_udr_mask | S5M_RTC_TIME_EN_MASK;
+	case S2MPS15X:
+		/* As per UM, for write time register, set WUDR bit to high */
+		data |= S2MPS15_RTC_WUDR_MASK;
+		break;
+	case S2MPS14X:
+	case S2MPS13X:
+		data |= info->regs->rtc_udr_mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
 
 	ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
 	if (ret < 0) {
@@ -252,6 +266,11 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
 	case S5M8767X:
 		data &= ~S5M_RTC_TIME_EN_MASK;
 		break;
+	case S2MPS15X:
+		/* As per UM, for write alarm, set A_UDR(bit[4]) to high
+		 * rtc_udr_mask above sets bit[4]
+		 */
+		break;
 	case S2MPS14X:
 		data |= S2MPS_RTC_RUDR_MASK;
 		break;
@@ -317,7 +336,8 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	u8 data[info->regs->regs_count];
 	int ret;
 
-	if (info->device_type == S2MPS14X || info->device_type == S2MPS13X) {
+	if (info->device_type == S2MPS15X || info->device_type == S2MPS14X ||
+			info->device_type == S2MPS13X) {
 		ret = regmap_update_bits(info->regmap,
 				info->regs->rtc_udr_update,
 				S2MPS_RTC_RUDR_MASK, S2MPS_RTC_RUDR_MASK);
@@ -339,6 +359,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		break;
 
 	case S5M8767X:
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode);
@@ -366,6 +387,7 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		s5m8763_tm_to_data(tm, data);
 		break;
 	case S5M8767X:
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		ret = s5m8767_tm_to_data(tm, data);
@@ -414,6 +436,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 		break;
 
 	case S5M8767X:
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
@@ -463,6 +486,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
 		break;
 
 	case S5M8767X:
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		for (i = 0; i < info->regs->regs_count; i++)
@@ -508,6 +532,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
 		break;
 
 	case S5M8767X:
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		data[RTC_SEC] |= ALARM_ENABLE_MASK;
@@ -548,6 +573,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 		break;
 
 	case S5M8767X:
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		s5m8767_tm_to_data(&alrm->time, data);
@@ -631,6 +657,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
 		ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
 		break;
 
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
@@ -679,6 +706,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	switch (platform_get_device_id(pdev)->driver_data) {
+	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
 		regmap_cfg = &s2mps14_rtc_regmap_config;
@@ -805,6 +833,7 @@ static const struct platform_device_id s5m_rtc_id[] = {
 	{ "s5m-rtc",		S5M8767X },
 	{ "s2mps13-rtc",	S2MPS13X },
 	{ "s2mps14-rtc",	S2MPS14X },
+	{ "s2mps15-rtc",	S2MPS15X },
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, s5m_rtc_id);
diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h
index 29c30ac..a65e465 100644
--- a/include/linux/mfd/samsung/rtc.h
+++ b/include/linux/mfd/samsung/rtc.h
@@ -107,6 +107,8 @@ enum s2mps_rtc_reg {
 #define S2MPS_RTC_WUDR_MASK	(1 << S2MPS_RTC_WUDR_SHIFT)
 #define S2MPS13_RTC_AUDR_SHIFT	1
 #define S2MPS13_RTC_AUDR_MASK	(1 << S2MPS13_RTC_AUDR_SHIFT)
+#define S2MPS15_RTC_WUDR_SHIFT	1
+#define S2MPS15_RTC_WUDR_MASK	(1 << S2MPS15_RTC_WUDR_SHIFT)
 #define S2MPS_RTC_RUDR_SHIFT	0
 #define S2MPS_RTC_RUDR_MASK	(1 << S2MPS_RTC_RUDR_SHIFT)
 #define RTC_TCON_SHIFT		1
-- 
cgit v0.10.2


From 6223a30935852369fd797f44eeafac445e422ac4 Mon Sep 17 00:00:00 2001
From: Alexandra Yates <alexandra.yates@linux.intel.com>
Date: Fri, 6 Nov 2015 15:19:48 -0800
Subject: mfd: lpc_ich: Intel device IDs for PCH

Adding Intel codename Lewisburg platform device IDs for PCH.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index b514f3c..bd3aa45 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -55,6 +55,7 @@
  *	document number TBD : Coleto Creek
  *	document number TBD : Wildcat Point-LP
  *	document number TBD : 9 Series
+ *	document number TBD : Lewisburg
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -213,6 +214,7 @@ enum lpc_chipsets {
 	LPC_COLETO,	/* Coleto Creek */
 	LPC_WPT_LP,	/* Wildcat Point-LP */
 	LPC_BRASWELL,	/* Braswell SoC */
+	LPC_LEWISBURG,	/* Lewisburg */
 	LPC_9S,		/* 9 Series */
 };
 
@@ -521,6 +523,10 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 		.name = "Braswell SoC",
 		.iTCO_version = 3,
 	},
+	[LPC_LEWISBURG] = {
+		.name = "Lewisburg",
+		.iTCO_version = 2,
+	},
 	[LPC_9S] = {
 		.name = "9 Series",
 		.iTCO_version = 2,
@@ -757,6 +763,15 @@ static const struct pci_device_id lpc_ich_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x9cc6), LPC_WPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9cc7), LPC_WPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9cc9), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0xa1c1), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c2), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c3), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c4), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c5), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c6), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c7), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa242), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa243), LPC_LEWISBURG},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, lpc_ich_ids);
-- 
cgit v0.10.2


From 2fadbbf02d81c825b1627f673499d0e0b9d132b6 Mon Sep 17 00:00:00 2001
From: Alim Akhtar <alim.akhtar@samsung.com>
Date: Fri, 20 Nov 2015 16:18:26 +0530
Subject: mfd: sec-core: Rename MFD and regulator names differently

Currently S2MPSXX multifunction device is named as *-pmic,
and these MFDs also supports regulator as a one of its MFD cell which
has the same name, because current name is confusing and we want to
sort it out.

We did discussed different approaches about how the MFD and it
cells need to be named here [1].
Based in the discussion this patch rename MFD regulator name as
*-regulator instead of current *-pmic.

This patch also changes the corresponding entries in the regulator driver
to keep git-bisect happy.

[1]-> https://lkml.org/lkml/2015/10/28/417

Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 7c4e7be..c9802ba 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -68,7 +68,7 @@ static const struct mfd_cell s5m8767_devs[] = {
 
 static const struct mfd_cell s2mps11_devs[] = {
 	{
-		.name = "s2mps11-pmic",
+		.name = "s2mps11-regulator",
 	}, {
 		.name = "s2mps14-rtc",
 	}, {
@@ -78,7 +78,7 @@ static const struct mfd_cell s2mps11_devs[] = {
 };
 
 static const struct mfd_cell s2mps13_devs[] = {
-	{ .name = "s2mps13-pmic", },
+	{ .name = "s2mps13-regulator", },
 	{ .name = "s2mps13-rtc", },
 	{
 		.name = "s2mps13-clk",
@@ -88,7 +88,7 @@ static const struct mfd_cell s2mps13_devs[] = {
 
 static const struct mfd_cell s2mps14_devs[] = {
 	{
-		.name = "s2mps14-pmic",
+		.name = "s2mps14-regulator",
 	}, {
 		.name = "s2mps14-rtc",
 	}, {
@@ -116,7 +116,7 @@ static const struct mfd_cell s2mpa01_devs[] = {
 
 static const struct mfd_cell s2mpu02_devs[] = {
 	{
-		.name = "s2mpu02-pmic",
+		.name = "s2mpu02-regulator",
 	},
 };
 
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index b2f3a28..3242ffc 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -1199,11 +1199,11 @@ out:
 }
 
 static const struct platform_device_id s2mps11_pmic_id[] = {
-	{ "s2mps11-pmic", S2MPS11X},
-	{ "s2mps13-pmic", S2MPS13X},
-	{ "s2mps14-pmic", S2MPS14X},
+	{ "s2mps11-regulator", S2MPS11X},
+	{ "s2mps13-regulator", S2MPS13X},
+	{ "s2mps14-regulator", S2MPS14X},
 	{ "s2mps15-regulator", S2MPS15X},
-	{ "s2mpu02-pmic", S2MPU02},
+	{ "s2mpu02-regulator", S2MPU02},
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
-- 
cgit v0.10.2


From 51669f89931d7e07c297fa11028cd1e3a4cef09c Mon Sep 17 00:00:00 2001
From: "Andrew F. Davis" <afd@ti.com>
Date: Mon, 21 Sep 2015 11:25:40 -0500
Subject: Documentation: dt-bindings: Fix interrupt documentation file path

Fix the incorrect interrupt documentation file path in binding docs.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
index dd5d2c0..4d6c8cd 100644
--- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
@@ -24,7 +24,7 @@ controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt.  Shall be set to 2.  The first cell defines the interrupt number,
   the second encodes the triger flags encoded as described in
-  Documentation/devicetree/bindings/interrupts.txt
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 - interrupt-parent : The parent interrupt controller.
 - interrupts : The interrupt to the parent controller raised when GPIOs
   generate the interrupts.
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 18be0cb..2c5d038 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -24,7 +24,7 @@ Required properties:
   - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
     The first cell is the IRQ number.
     The second cell is the flags, encoded as the trigger masks from
-    Documentation/devicetree/bindings/interrupts.txt
+    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
   - gpio-controller : Indicates this device is a GPIO controller.
   - #gpio-cells : Must be 2. The first cell is the pin number and the
diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt
index eda8989..8ae1a32 100644
--- a/Documentation/devicetree/bindings/mfd/palmas.txt
+++ b/Documentation/devicetree/bindings/mfd/palmas.txt
@@ -24,7 +24,7 @@ and also the generic series names
 - #interrupt-cells : should be set to 2 for IRQ number and flags
   The first cell is the IRQ number.
   The second cell is the flags, encoded as the trigger masks from
-  Documentation/devicetree/bindings/interrupts.txt
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 - interrupt-parent : The parent interrupt controller.
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index e045e90..68c4e8d 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -30,7 +30,7 @@ Optional properties:
   - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
     The first cell is the IRQ number.
     The second cell is the flags, encoded as the trigger masks from
-    Documentation/devicetree/bindings/interrupts.txt
+    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
   - clocks : A list of up to two phandle and clock specifier pairs
   - clock-names : A list of clock names sorted in the same order as clocks.
-- 
cgit v0.10.2


From cc509d5ba2b74fea8d0598cc941f4b5e4052740a Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Thu, 19 Nov 2015 16:46:14 +0000
Subject: mfd: wm8994: Ensure that the whole MFD is built into a single module

The MFD part of wm8994 consists of three files wm8994-core.c,
wm8994-irq.c and wm8994-regmap.c only wm8994-core.c has a
MODULE_DESCRIPTION / LICENSE. These were clearly intended to be built
as a single module, but currently are not. This will lead to a tainted
kernel when loading modules for wm8894-irq.c and wm8994-regmap.c because
are missing a license.

This patch fixes this issue by grouping the three files together into a
single module.

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a8b76b8..99f93ab 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -61,7 +61,8 @@ wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 wm8350-objs			+= wm8350-irq.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
-obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o wm8994-irq.o wm8994-regmap.o
+wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
+obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
 
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
-- 
cgit v0.10.2


From 35deff7eb212b661b32177b6043f674fde6314d7 Mon Sep 17 00:00:00 2001
From: Jon Hunter <jonathanh@nvidia.com>
Date: Fri, 20 Nov 2015 10:51:00 +0000
Subject: mfd: as3722: Handle interrupts on suspend

The as3722 device is registered as an irqchip and the as3722-rtc interrupt
is one of it's interrupt sources. When using the as3722-rtc as a wake-up
device from suspend, the following is seen:

  PM: Syncing filesystems ... done.
  Freezing user space processes ... (elapsed 0.001 seconds) done.
  Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  Suspending console(s) (use no_console_suspend to debug)
  PM: suspend of devices complete after 161.119 msecs
  PM: late suspend of devices complete after 1.048 msecs
  PM: noirq suspend of devices complete after 0.756 msecs
  Disabling non-boot CPUs ...
  CPU1: shutdown
  CPU2: shutdown
  CPU3: shutdown
  Entering suspend state LP1
  Enabling non-boot CPUs ...
  CPU1 is up
  CPU2 is up
  CPU3 is up
  PM: noirq resume of devices complete after 0.487 msecs
  as3722 4-0040: Failed to read IRQ status: -16
  as3722 4-0040: Failed to read IRQ status: -16
  as3722 4-0040: Failed to read IRQ status: -16
  as3722 4-0040: Failed to read IRQ status: -16
  ...

The reason why the as3722 interrupt status cannot be read is because the
as3722 interrupt is not masked during suspend and when the as3722-rtc
interrupt occurs, to wake-up the device, the interrupt is seen before the
i2c controller has been resumed in order to read the as3722 interrupt
status.

The as3722-rtc driver sets it's interrupt as a wake-up source during
suspend, which gets propagated to the parent as3722 interrupt. However,
the as3722-rtc driver cannot disable it's interrupt during suspend
otherwise we would never be woken up and so the as3722 must disable it's
interrupt instead.

Fix this by disabling the as3722 interrupt during suspend. To ensure that
a wake-up event from the as3722 is not missing, enable the as3722 interrupt
as a wake-up source before disabling the interrupt on entering suspend.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c
index 924ea90..3b21eb4 100644
--- a/drivers/mfd/as3722.c
+++ b/drivers/mfd/as3722.c
@@ -405,6 +405,8 @@ static int as3722_i2c_probe(struct i2c_client *i2c,
 		goto scrub;
 	}
 
+	device_init_wakeup(as3722->dev, true);
+
 	dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n");
 	return 0;
 
@@ -422,6 +424,29 @@ static int as3722_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
+static int as3722_i2c_suspend(struct device *dev)
+{
+	struct as3722 *as3722 = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(as3722->chip_irq);
+	disable_irq(as3722->chip_irq);
+
+	return 0;
+}
+
+static int as3722_i2c_resume(struct device *dev)
+{
+	struct as3722 *as3722 = dev_get_drvdata(dev);
+
+	enable_irq(as3722->chip_irq);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(as3722->chip_irq);
+
+	return 0;
+}
+
 static const struct of_device_id as3722_of_match[] = {
 	{ .compatible = "ams,as3722", },
 	{},
@@ -434,10 +459,15 @@ static const struct i2c_device_id as3722_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, as3722_i2c_id);
 
+static const struct dev_pm_ops as3722_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(as3722_i2c_suspend, as3722_i2c_resume)
+};
+
 static struct i2c_driver as3722_i2c_driver = {
 	.driver = {
 		.name = "as3722",
 		.of_match_table = as3722_of_match,
+		.pm = &as3722_pm_ops,
 	},
 	.probe = as3722_i2c_probe,
 	.remove = as3722_i2c_remove,
-- 
cgit v0.10.2


From 505b9e573ce1384f1729acb3226f6d83b651dee1 Mon Sep 17 00:00:00 2001
From: Saurabh Sengar <saurabh.truth@gmail.com>
Date: Mon, 16 Nov 2015 14:43:17 +0530
Subject: mfd: mc13xxx-core: Use of_property_read_bool()

For checking if a property is present or not,
use of_property_read_bool instead of of_get_property()

Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 3f9f4c8..d7f54e4 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -383,16 +383,16 @@ static int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx)
 	if (!np)
 		return -ENODEV;
 
-	if (of_get_property(np, "fsl,mc13xxx-uses-adc", NULL))
+	if (of_property_read_bool(np, "fsl,mc13xxx-uses-adc"))
 		mc13xxx->flags |= MC13XXX_USE_ADC;
 
-	if (of_get_property(np, "fsl,mc13xxx-uses-codec", NULL))
+	if (of_property_read_bool(np, "fsl,mc13xxx-uses-codec"))
 		mc13xxx->flags |= MC13XXX_USE_CODEC;
 
-	if (of_get_property(np, "fsl,mc13xxx-uses-rtc", NULL))
+	if (of_property_read_bool(np, "fsl,mc13xxx-uses-rtc"))
 		mc13xxx->flags |= MC13XXX_USE_RTC;
 
-	if (of_get_property(np, "fsl,mc13xxx-uses-touch", NULL))
+	if (of_property_read_bool(np, "fsl,mc13xxx-uses-touch"))
 		mc13xxx->flags |= MC13XXX_USE_TOUCHSCREEN;
 
 	return 0;
-- 
cgit v0.10.2


From f83e7d814084d9e982a8e24311a402e811d0ee90 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Fri, 13 Nov 2015 17:03:51 +0100
Subject: mfd: da903x: Constify da903x_chip_ops structure

The da903x_chip_ops structure is never modified, so declare it
as const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 37e4426..f6a0459 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -60,7 +60,7 @@ struct da903x_chip_ops {
 struct da903x_chip {
 	struct i2c_client	*client;
 	struct device		*dev;
-	struct da903x_chip_ops	*ops;
+	const struct da903x_chip_ops *ops;
 
 	int			type;
 	uint32_t		events_mask;
@@ -424,7 +424,7 @@ static irqreturn_t da903x_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static struct da903x_chip_ops da903x_ops[] = {
+static const struct da903x_chip_ops da903x_ops[] = {
 	[0] = {
 		.init_chip	= da9030_init_chip,
 		.unmask_events	= da9030_unmask_events,
-- 
cgit v0.10.2


From bdd5dcf513847b306621a2059e2ebee910208d8a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Thu, 12 Nov 2015 10:51:10 +0100
Subject: mfd: ab8500: Delete static IRQ resources

The platforms that use the AB8500 define all IRQ resources in the
device tree and they are automatically populated by matching
the .of_compatible string. These static resources are just
surplus baggage these days.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index fefbe4c..582d358 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -609,442 +609,28 @@ int ab8500_suspend(struct ab8500 *ab8500)
 	return 0;
 }
 
-static struct resource ab8500_gpadc_resources[] = {
-	{
-		.name	= "HW_CONV_END",
-		.start	= AB8500_INT_GP_HW_ADC_CONV_END,
-		.end	= AB8500_INT_GP_HW_ADC_CONV_END,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "SW_CONV_END",
-		.start	= AB8500_INT_GP_SW_ADC_CONV_END,
-		.end	= AB8500_INT_GP_SW_ADC_CONV_END,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8505_gpadc_resources[] = {
-	{
-		.name	= "SW_CONV_END",
-		.start	= AB8500_INT_GP_SW_ADC_CONV_END,
-		.end	= AB8500_INT_GP_SW_ADC_CONV_END,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8500_rtc_resources[] = {
-	{
-		.name	= "60S",
-		.start	= AB8500_INT_RTC_60S,
-		.end	= AB8500_INT_RTC_60S,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "ALARM",
-		.start	= AB8500_INT_RTC_ALARM,
-		.end	= AB8500_INT_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8540_rtc_resources[] = {
-	{
-		.name	= "1S",
-		.start	= AB8540_INT_RTC_1S,
-		.end	= AB8540_INT_RTC_1S,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "ALARM",
-		.start	= AB8500_INT_RTC_ALARM,
-		.end	= AB8500_INT_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8500_poweronkey_db_resources[] = {
-	{
-		.name	= "ONKEY_DBF",
-		.start	= AB8500_INT_PON_KEY1DB_F,
-		.end	= AB8500_INT_PON_KEY1DB_F,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "ONKEY_DBR",
-		.start	= AB8500_INT_PON_KEY1DB_R,
-		.end	= AB8500_INT_PON_KEY1DB_R,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8500_av_acc_detect_resources[] = {
-	{
-	       .name = "ACC_DETECT_1DB_F",
-	       .start = AB8500_INT_ACC_DETECT_1DB_F,
-	       .end = AB8500_INT_ACC_DETECT_1DB_F,
-	       .flags = IORESOURCE_IRQ,
-	},
-	{
-	       .name = "ACC_DETECT_1DB_R",
-	       .start = AB8500_INT_ACC_DETECT_1DB_R,
-	       .end = AB8500_INT_ACC_DETECT_1DB_R,
-	       .flags = IORESOURCE_IRQ,
-	},
-	{
-	       .name = "ACC_DETECT_21DB_F",
-	       .start = AB8500_INT_ACC_DETECT_21DB_F,
-	       .end = AB8500_INT_ACC_DETECT_21DB_F,
-	       .flags = IORESOURCE_IRQ,
-	},
-	{
-	       .name = "ACC_DETECT_21DB_R",
-	       .start = AB8500_INT_ACC_DETECT_21DB_R,
-	       .end = AB8500_INT_ACC_DETECT_21DB_R,
-	       .flags = IORESOURCE_IRQ,
-	},
-	{
-	       .name = "ACC_DETECT_22DB_F",
-	       .start = AB8500_INT_ACC_DETECT_22DB_F,
-	       .end = AB8500_INT_ACC_DETECT_22DB_F,
-	       .flags = IORESOURCE_IRQ,
-	},
-	{
-	       .name = "ACC_DETECT_22DB_R",
-	       .start = AB8500_INT_ACC_DETECT_22DB_R,
-	       .end = AB8500_INT_ACC_DETECT_22DB_R,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8500_charger_resources[] = {
-	{
-		.name = "MAIN_CH_UNPLUG_DET",
-		.start = AB8500_INT_MAIN_CH_UNPLUG_DET,
-		.end = AB8500_INT_MAIN_CH_UNPLUG_DET,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "MAIN_CHARGE_PLUG_DET",
-		.start = AB8500_INT_MAIN_CH_PLUG_DET,
-		.end = AB8500_INT_MAIN_CH_PLUG_DET,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "VBUS_DET_R",
-		.start = AB8500_INT_VBUS_DET_R,
-		.end = AB8500_INT_VBUS_DET_R,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "VBUS_DET_F",
-		.start = AB8500_INT_VBUS_DET_F,
-		.end = AB8500_INT_VBUS_DET_F,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "USB_LINK_STATUS",
-		.start = AB8500_INT_USB_LINK_STATUS,
-		.end = AB8500_INT_USB_LINK_STATUS,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "VBUS_OVV",
-		.start = AB8500_INT_VBUS_OVV,
-		.end = AB8500_INT_VBUS_OVV,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "USB_CH_TH_PROT_R",
-		.start = AB8500_INT_USB_CH_TH_PROT_R,
-		.end = AB8500_INT_USB_CH_TH_PROT_R,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "USB_CH_TH_PROT_F",
-		.start = AB8500_INT_USB_CH_TH_PROT_F,
-		.end = AB8500_INT_USB_CH_TH_PROT_F,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "MAIN_EXT_CH_NOT_OK",
-		.start = AB8500_INT_MAIN_EXT_CH_NOT_OK,
-		.end = AB8500_INT_MAIN_EXT_CH_NOT_OK,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "MAIN_CH_TH_PROT_R",
-		.start = AB8500_INT_MAIN_CH_TH_PROT_R,
-		.end = AB8500_INT_MAIN_CH_TH_PROT_R,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "MAIN_CH_TH_PROT_F",
-		.start = AB8500_INT_MAIN_CH_TH_PROT_F,
-		.end = AB8500_INT_MAIN_CH_TH_PROT_F,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "USB_CHARGER_NOT_OKR",
-		.start = AB8500_INT_USB_CHARGER_NOT_OKR,
-		.end = AB8500_INT_USB_CHARGER_NOT_OKR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "CH_WD_EXP",
-		.start = AB8500_INT_CH_WD_EXP,
-		.end = AB8500_INT_CH_WD_EXP,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "VBUS_CH_DROP_END",
-		.start = AB8500_INT_VBUS_CH_DROP_END,
-		.end = AB8500_INT_VBUS_CH_DROP_END,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8500_btemp_resources[] = {
-	{
-		.name = "BAT_CTRL_INDB",
-		.start = AB8500_INT_BAT_CTRL_INDB,
-		.end = AB8500_INT_BAT_CTRL_INDB,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "BTEMP_LOW",
-		.start = AB8500_INT_BTEMP_LOW,
-		.end = AB8500_INT_BTEMP_LOW,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "BTEMP_HIGH",
-		.start = AB8500_INT_BTEMP_HIGH,
-		.end = AB8500_INT_BTEMP_HIGH,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "BTEMP_LOW_MEDIUM",
-		.start = AB8500_INT_BTEMP_LOW_MEDIUM,
-		.end = AB8500_INT_BTEMP_LOW_MEDIUM,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "BTEMP_MEDIUM_HIGH",
-		.start = AB8500_INT_BTEMP_MEDIUM_HIGH,
-		.end = AB8500_INT_BTEMP_MEDIUM_HIGH,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8500_fg_resources[] = {
-	{
-		.name = "NCONV_ACCU",
-		.start = AB8500_INT_CCN_CONV_ACC,
-		.end = AB8500_INT_CCN_CONV_ACC,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "BATT_OVV",
-		.start = AB8500_INT_BATT_OVV,
-		.end = AB8500_INT_BATT_OVV,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "LOW_BAT_F",
-		.start = AB8500_INT_LOW_BAT_F,
-		.end = AB8500_INT_LOW_BAT_F,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "LOW_BAT_R",
-		.start = AB8500_INT_LOW_BAT_R,
-		.end = AB8500_INT_LOW_BAT_R,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "CC_INT_CALIB",
-		.start = AB8500_INT_CC_INT_CALIB,
-		.end = AB8500_INT_CC_INT_CALIB,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "CCEOC",
-		.start = AB8500_INT_CCEOC,
-		.end = AB8500_INT_CCEOC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8500_chargalg_resources[] = {};
-
-#ifdef CONFIG_DEBUG_FS
-static struct resource ab8500_debug_resources[] = {
-	{
-		.name	= "IRQ_AB8500",
-		/*
-		 * Number will be filled in. NOTE: this is deliberately
-		 * not flagged as an IRQ in ordet to avoid remapping using
-		 * the irqdomain in the MFD core, so that this IRQ passes
-		 * unremapped to the debug code.
-		 */
-	},
-	{
-		.name	= "IRQ_FIRST",
-		.start	= AB8500_INT_MAIN_EXT_CH_NOT_OK,
-		.end	= AB8500_INT_MAIN_EXT_CH_NOT_OK,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "IRQ_LAST",
-		.start	= AB8500_INT_XTAL32K_KO,
-		.end	= AB8500_INT_XTAL32K_KO,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-#endif
-
-static struct resource ab8500_usb_resources[] = {
-	{
-		.name = "ID_WAKEUP_R",
-		.start = AB8500_INT_ID_WAKEUP_R,
-		.end = AB8500_INT_ID_WAKEUP_R,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "ID_WAKEUP_F",
-		.start = AB8500_INT_ID_WAKEUP_F,
-		.end = AB8500_INT_ID_WAKEUP_F,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "VBUS_DET_F",
-		.start = AB8500_INT_VBUS_DET_F,
-		.end = AB8500_INT_VBUS_DET_F,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "VBUS_DET_R",
-		.start = AB8500_INT_VBUS_DET_R,
-		.end = AB8500_INT_VBUS_DET_R,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "USB_LINK_STATUS",
-		.start = AB8500_INT_USB_LINK_STATUS,
-		.end = AB8500_INT_USB_LINK_STATUS,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "USB_ADP_PROBE_PLUG",
-		.start = AB8500_INT_ADP_PROBE_PLUG,
-		.end = AB8500_INT_ADP_PROBE_PLUG,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "USB_ADP_PROBE_UNPLUG",
-		.start = AB8500_INT_ADP_PROBE_UNPLUG,
-		.end = AB8500_INT_ADP_PROBE_UNPLUG,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8505_iddet_resources[] = {
-	{
-		.name  = "KeyDeglitch",
-		.start = AB8505_INT_KEYDEGLITCH,
-		.end   = AB8505_INT_KEYDEGLITCH,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "KP",
-		.start = AB8505_INT_KP,
-		.end   = AB8505_INT_KP,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "IKP",
-		.start = AB8505_INT_IKP,
-		.end   = AB8505_INT_IKP,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "IKR",
-		.start = AB8505_INT_IKR,
-		.end   = AB8505_INT_IKR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "KeyStuck",
-		.start = AB8505_INT_KEYSTUCK,
-		.end   = AB8505_INT_KEYSTUCK,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "VBUS_DET_R",
-		.start = AB8500_INT_VBUS_DET_R,
-		.end = AB8500_INT_VBUS_DET_R,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "VBUS_DET_F",
-		.start = AB8500_INT_VBUS_DET_F,
-		.end = AB8500_INT_VBUS_DET_F,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "ID_DET_PLUGR",
-		.start = AB8500_INT_ID_DET_PLUGR,
-		.end = AB8500_INT_ID_DET_PLUGR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "ID_DET_PLUGF",
-		.start = AB8500_INT_ID_DET_PLUGF,
-		.end = AB8500_INT_ID_DET_PLUGF,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ab8500_temp_resources[] = {
-	{
-		.name  = "ABX500_TEMP_WARM",
-		.start = AB8500_INT_TEMP_WARM,
-		.end   = AB8500_INT_TEMP_WARM,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
 static const struct mfd_cell ab8500_bm_devs[] = {
 	{
 		.name = "ab8500-charger",
 		.of_compatible = "stericsson,ab8500-charger",
-		.num_resources = ARRAY_SIZE(ab8500_charger_resources),
-		.resources = ab8500_charger_resources,
 		.platform_data = &ab8500_bm_data,
 		.pdata_size = sizeof(ab8500_bm_data),
 	},
 	{
 		.name = "ab8500-btemp",
 		.of_compatible = "stericsson,ab8500-btemp",
-		.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
-		.resources = ab8500_btemp_resources,
 		.platform_data = &ab8500_bm_data,
 		.pdata_size = sizeof(ab8500_bm_data),
 	},
 	{
 		.name = "ab8500-fg",
 		.of_compatible = "stericsson,ab8500-fg",
-		.num_resources = ARRAY_SIZE(ab8500_fg_resources),
-		.resources = ab8500_fg_resources,
 		.platform_data = &ab8500_bm_data,
 		.pdata_size = sizeof(ab8500_bm_data),
 	},
 	{
 		.name = "ab8500-chargalg",
 		.of_compatible = "stericsson,ab8500-chargalg",
-		.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
-		.resources = ab8500_chargalg_resources,
 		.platform_data = &ab8500_bm_data,
 		.pdata_size = sizeof(ab8500_bm_data),
 	},
@@ -1055,8 +641,6 @@ static const struct mfd_cell ab8500_devs[] = {
 	{
 		.name = "ab8500-debug",
 		.of_compatible = "stericsson,ab8500-debug",
-		.num_resources = ARRAY_SIZE(ab8500_debug_resources),
-		.resources = ab8500_debug_resources,
 	},
 #endif
 	{
@@ -1078,27 +662,19 @@ static const struct mfd_cell ab8500_devs[] = {
 	{
 		.name = "ab8500-gpadc",
 		.of_compatible = "stericsson,ab8500-gpadc",
-		.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
-		.resources = ab8500_gpadc_resources,
 	},
 	{
 		.name = "ab8500-rtc",
 		.of_compatible = "stericsson,ab8500-rtc",
-		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
-		.resources = ab8500_rtc_resources,
 	},
 	{
 		.name = "ab8500-acc-det",
 		.of_compatible = "stericsson,ab8500-acc-det",
-		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
-		.resources = ab8500_av_acc_detect_resources,
 	},
 	{
 
 		.name = "ab8500-poweron-key",
 		.of_compatible = "stericsson,ab8500-poweron-key",
-		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
-		.resources = ab8500_poweronkey_db_resources,
 	},
 	{
 		.name = "ab8500-pwm",
@@ -1126,14 +702,10 @@ static const struct mfd_cell ab8500_devs[] = {
 	{
 		.name = "abx500-temp",
 		.of_compatible = "stericsson,abx500-temp",
-		.num_resources = ARRAY_SIZE(ab8500_temp_resources),
-		.resources = ab8500_temp_resources,
 	},
 	{
 		.name = "ab8500-usb",
 		.of_compatible = "stericsson,ab8500-usb",
-		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
-		.resources = ab8500_usb_resources,
 	},
 	{
 		.name = "ab8500-codec",
@@ -1145,8 +717,6 @@ static const struct mfd_cell ab9540_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
-		.num_resources = ARRAY_SIZE(ab8500_debug_resources),
-		.resources = ab8500_debug_resources,
 	},
 #endif
 	{
@@ -1165,23 +735,15 @@ static const struct mfd_cell ab9540_devs[] = {
 	{
 		.name = "ab8500-gpadc",
 		.of_compatible = "stericsson,ab8500-gpadc",
-		.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
-		.resources = ab8500_gpadc_resources,
 	},
 	{
 		.name = "ab8500-rtc",
-		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
-		.resources = ab8500_rtc_resources,
 	},
 	{
 		.name = "ab8500-acc-det",
-		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
-		.resources = ab8500_av_acc_detect_resources,
 	},
 	{
 		.name = "ab8500-poweron-key",
-		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
-		.resources = ab8500_poweronkey_db_resources,
 	},
 	{
 		.name = "ab8500-pwm",
@@ -1189,8 +751,6 @@ static const struct mfd_cell ab9540_devs[] = {
 	},
 	{
 		.name = "abx500-temp",
-		.num_resources = ARRAY_SIZE(ab8500_temp_resources),
-		.resources = ab8500_temp_resources,
 	},
 	{
 		.name = "pinctrl-ab9540",
@@ -1198,16 +758,12 @@ static const struct mfd_cell ab9540_devs[] = {
 	},
 	{
 		.name = "ab9540-usb",
-		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
-		.resources = ab8500_usb_resources,
 	},
 	{
 		.name = "ab9540-codec",
 	},
 	{
 		.name = "ab-iddet",
-		.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
-		.resources = ab8505_iddet_resources,
 	},
 };
 
@@ -1216,8 +772,6 @@ static const struct mfd_cell ab8505_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
-		.num_resources = ARRAY_SIZE(ab8500_debug_resources),
-		.resources = ab8500_debug_resources,
 	},
 #endif
 	{
@@ -1233,23 +787,15 @@ static const struct mfd_cell ab8505_devs[] = {
 	{
 		.name = "ab8500-gpadc",
 		.of_compatible = "stericsson,ab8500-gpadc",
-		.num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
-		.resources = ab8505_gpadc_resources,
 	},
 	{
 		.name = "ab8500-rtc",
-		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
-		.resources = ab8500_rtc_resources,
 	},
 	{
 		.name = "ab8500-acc-det",
-		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
-		.resources = ab8500_av_acc_detect_resources,
 	},
 	{
 		.name = "ab8500-poweron-key",
-		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
-		.resources = ab8500_poweronkey_db_resources,
 	},
 	{
 		.name = "ab8500-pwm",
@@ -1260,16 +806,12 @@ static const struct mfd_cell ab8505_devs[] = {
 	},
 	{
 		.name = "ab8500-usb",
-		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
-		.resources = ab8500_usb_resources,
 	},
 	{
 		.name = "ab8500-codec",
 	},
 	{
 		.name = "ab-iddet",
-		.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
-		.resources = ab8505_iddet_resources,
 	},
 };
 
@@ -1277,8 +819,6 @@ static const struct mfd_cell ab8540_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
-		.num_resources = ARRAY_SIZE(ab8500_debug_resources),
-		.resources = ab8500_debug_resources,
 	},
 #endif
 	{
@@ -1297,18 +837,12 @@ static const struct mfd_cell ab8540_devs[] = {
 	{
 		.name = "ab8500-gpadc",
 		.of_compatible = "stericsson,ab8500-gpadc",
-		.num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
-		.resources = ab8505_gpadc_resources,
 	},
 	{
 		.name = "ab8500-acc-det",
-		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
-		.resources = ab8500_av_acc_detect_resources,
 	},
 	{
 		.name = "ab8500-poweron-key",
-		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
-		.resources = ab8500_poweronkey_db_resources,
 	},
 	{
 		.name = "ab8500-pwm",
@@ -1316,24 +850,18 @@ static const struct mfd_cell ab8540_devs[] = {
 	},
 	{
 		.name = "abx500-temp",
-		.num_resources = ARRAY_SIZE(ab8500_temp_resources),
-		.resources = ab8500_temp_resources,
 	},
 	{
 		.name = "pinctrl-ab8540",
 	},
 	{
 		.name = "ab8540-usb",
-		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
-		.resources = ab8500_usb_resources,
 	},
 	{
 		.name = "ab8540-codec",
 	},
 	{
 		.name = "ab-iddet",
-		.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
-		.resources = ab8505_iddet_resources,
 	},
 };
 
@@ -1341,8 +869,6 @@ static const struct mfd_cell ab8540_cut1_devs[] = {
 	{
 		.name = "ab8500-rtc",
 		.of_compatible = "stericsson,ab8500-rtc",
-		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
-		.resources = ab8500_rtc_resources,
 	},
 };
 
@@ -1350,8 +876,6 @@ static const struct mfd_cell ab8540_cut2_devs[] = {
 	{
 		.name = "ab8540-rtc",
 		.of_compatible = "stericsson,ab8540-rtc",
-		.num_resources = ARRAY_SIZE(ab8540_rtc_resources),
-		.resources = ab8540_rtc_resources,
 	},
 };
 
@@ -1750,12 +1274,6 @@ static int ab8500_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_DEBUG_FS
-	/* Pass to debugfs */
-	ab8500_debug_resources[0].start = ab8500->irq;
-	ab8500_debug_resources[0].end = ab8500->irq;
-#endif
-
 	if (is_ab9540(ab8500))
 		ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
 				ARRAY_SIZE(ab9540_devs), NULL,
-- 
cgit v0.10.2


From cf1199f792da92dabfd5dfb2bd2211b5d191da45 Mon Sep 17 00:00:00 2001
From: LABBE Corentin <clabbe.montjoie@gmail.com>
Date: Thu, 12 Nov 2015 08:49:59 +0100
Subject: mfd: qcom_rpm: Fix a possible NULL dereference

of_match_device could return NULL, and so cause a NULL pointer
dereference later.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 207a3bd..1be47ad 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -495,6 +495,8 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 	}
 
 	match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
 	rpm->data = match->data;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- 
cgit v0.10.2


From 9a65a6d3cbeeb4429b3bdff6404fca0b98fb8222 Mon Sep 17 00:00:00 2001
From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Date: Tue, 3 Nov 2015 15:08:33 +0000
Subject: mfd: arizona: Update DT bindings to add CS47L24 and WM1831

This updates the Arizona MFD device tree bindings to add the
Cirrus Logic CS47L24 and WM1831 codecs. Note that unlike all the
other codecs the DCVDD-supply and MICVDD-supply are mandatory.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 2c5d038..2b6ccdb 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -1,4 +1,4 @@
-Wolfson Arizona class audio SoCs
+Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
 
 These devices are audio SoCs with extensive digital capabilites and a range
 of analogue I/O.
@@ -6,12 +6,14 @@ of analogue I/O.
 Required properties:
 
   - compatible : One of the following chip-specific strings:
+        "cirrus,cs47l24"
         "wlf,wm5102"
         "wlf,wm5110"
         "wlf,wm8280"
         "wlf,wm8997"
         "wlf,wm8998"
         "wlf,wm1814"
+        "wlf,wm1831"
 
   - reg : I2C slave address when connected using I2C, chip select number when
     using SPI.
@@ -41,6 +43,10 @@ Required properties:
 
   - SPKVDD-supply : Speaker driver power supply (wm8997)
 
+  - DCVDD-supply : Main power supply (cs47l24, wm1831)
+
+  - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
+
 Optional properties:
 
   - wlf,reset : GPIO specifier for the GPIO controlling /RESET
@@ -69,6 +75,7 @@ Optional properties:
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
+    (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
 
 Also see child specific device properties:
   Regulator - ../regulator/arizona-regulator.txt
-- 
cgit v0.10.2


From ea1f3339909d8973b41f09ef7275d7e49974b910 Mon Sep 17 00:00:00 2001
From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Date: Tue, 3 Nov 2015 15:08:32 +0000
Subject: mfd: arizona: Support Cirrus Logic CS47L24 and WM1831

This patch adds the regmap configuration tables and
core MFD handling for the CS47L24 and WM1831 codecs.

Note that compared to the other Arizona codecs, these devices
do not have an LDO1 or micsupp regulators, extcon driver, or
the DCVDD isolation control.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4d92df6..9581ebb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1370,24 +1370,30 @@ config MFD_ARIZONA
 	bool
 
 config MFD_ARIZONA_I2C
-	tristate "Wolfson Microelectronics Arizona platform with I2C"
+	tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C"
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_I2C
 	depends on I2C
 	help
-	  Support for the Wolfson Microelectronics Arizona platform audio SoC
-	  core functionality controlled via I2C.
+	  Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
+	  audio SoC core functionality controlled via I2C.
 
 config MFD_ARIZONA_SPI
-	tristate "Wolfson Microelectronics Arizona platform with SPI"
+	tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI"
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_SPI
 	depends on SPI_MASTER
 	help
-	  Support for the Wolfson Microelectronics Arizona platform audio SoC
-	  core functionality controlled via I2C.
+	  Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
+	  audio SoC core functionality controlled via I2C.
+
+config MFD_CS47L24
+	bool "Cirrus Logic CS47L24 and WM1831"
+	depends on MFD_ARIZONA
+	help
+	  Support for Cirrus Logic CS47L24 and WM1831 low power audio SoC
 
 config MFD_WM5102
 	bool "Wolfson Microelectronics WM5102"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 99f93ab..0f230a6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -51,6 +51,9 @@ endif
 ifeq ($(CONFIG_MFD_WM8998),y)
 obj-$(CONFIG_MFD_ARIZONA)	+= wm8998-tables.o
 endif
+ifeq ($(CONFIG_MFD_CS47L24),y)
+obj-$(CONFIG_MFD_ARIZONA)	+= cs47l24-tables.o
+endif
 obj-$(CONFIG_MFD_WM8400)	+= wm8400-core.o
 wm831x-objs			:= wm831x-core.o wm831x-irq.o wm831x-otp.o
 wm831x-objs			+= wm831x-auxadc.o
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index d474732..b9489a0 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -598,6 +598,12 @@ static int arizona_runtime_resume(struct device *dev)
 			goto err;
 		}
 		break;
+	case WM1831:
+	case CS47L24:
+		ret = arizona_wait_for_boot(arizona);
+		if (ret != 0)
+			goto err;
+		break;
 	default:
 		ret = arizona_wait_for_boot(arizona);
 		if (ret != 0)
@@ -682,6 +688,9 @@ static int arizona_runtime_suspend(struct device *dev)
 			}
 		}
 		break;
+	case WM1831:
+	case CS47L24:
+		break;
 	default:
 		jd_active = arizona_is_jack_det_active(arizona);
 		if (jd_active < 0)
@@ -862,6 +871,8 @@ const struct of_device_id arizona_of_match[] = {
 	{ .compatible = "wlf,wm8997", .data = (void *)WM8997 },
 	{ .compatible = "wlf,wm8998", .data = (void *)WM8998 },
 	{ .compatible = "wlf,wm1814", .data = (void *)WM1814 },
+	{ .compatible = "wlf,wm1831", .data = (void *)WM1831 },
+	{ .compatible = "cirrus,cs47l24", .data = (void *)CS47L24 },
 	{},
 };
 EXPORT_SYMBOL_GPL(arizona_of_match);
@@ -919,6 +930,23 @@ static const struct mfd_cell wm5110_devs[] = {
 	},
 };
 
+static const char * const cs47l24_supplies[] = {
+	"MICVDD",
+	"CPVDD",
+	"SPKVDD",
+};
+
+static const struct mfd_cell cs47l24_devs[] = {
+	{ .name = "arizona-gpio" },
+	{ .name = "arizona-haptics" },
+	{ .name = "arizona-pwm" },
+	{
+		.name = "cs47l24-codec",
+		.parent_supplies = cs47l24_supplies,
+		.num_parent_supplies = ARRAY_SIZE(cs47l24_supplies),
+	},
+};
+
 static const char * const wm8997_supplies[] = {
 	"MICVDD",
 	"DBVDD2",
@@ -963,7 +991,7 @@ static const struct mfd_cell wm8998_devs[] = {
 int arizona_dev_init(struct arizona *arizona)
 {
 	struct device *dev = arizona->dev;
-	const char *type_name;
+	const char *type_name = NULL;
 	unsigned int reg, val, mask;
 	int (*apply_patch)(struct arizona *) = NULL;
 	const struct mfd_cell *subdevs = NULL;
@@ -987,6 +1015,8 @@ int arizona_dev_init(struct arizona *arizona)
 	case WM8997:
 	case WM8998:
 	case WM1814:
+	case WM1831:
+	case CS47L24:
 		for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
 			arizona->core_supplies[i].supply
 				= wm5102_core_supplies[i];
@@ -1001,11 +1031,18 @@ int arizona_dev_init(struct arizona *arizona)
 	/* Mark DCVDD as external, LDO1 driver will clear if internal */
 	arizona->external_dcvdd = true;
 
-	ret = mfd_add_devices(arizona->dev, -1, early_devs,
-			      ARRAY_SIZE(early_devs), NULL, 0, NULL);
-	if (ret != 0) {
-		dev_err(dev, "Failed to add early children: %d\n", ret);
-		return ret;
+	switch (arizona->type) {
+	case WM1831:
+	case CS47L24:
+		break; /* No LDO1 regulator */
+	default:
+		ret = mfd_add_devices(arizona->dev, -1, early_devs,
+				      ARRAY_SIZE(early_devs), NULL, 0, NULL);
+		if (ret != 0) {
+			dev_err(dev, "Failed to add early children: %d\n", ret);
+			return ret;
+		}
+		break;
 	}
 
 	ret = devm_regulator_bulk_get(dev, arizona->num_core_supplies,
@@ -1069,6 +1106,7 @@ int arizona_dev_init(struct arizona *arizona)
 	case 0x5102:
 	case 0x5110:
 	case 0x6349:
+	case 0x6363:
 	case 0x8997:
 		break;
 	default:
@@ -1167,6 +1205,30 @@ int arizona_dev_init(struct arizona *arizona)
 			n_subdevs = ARRAY_SIZE(wm5110_devs);
 		}
 		break;
+	case 0x6363:
+		if (IS_ENABLED(CONFIG_MFD_CS47L24)) {
+			switch (arizona->type) {
+			case CS47L24:
+				type_name = "CS47L24";
+				break;
+
+			case WM1831:
+				type_name = "WM1831";
+				break;
+
+			default:
+				dev_warn(arizona->dev,
+					 "CS47L24 registered as %d\n",
+					 arizona->type);
+				arizona->type = CS47L24;
+				break;
+			}
+
+			apply_patch = cs47l24_patch;
+			subdevs = cs47l24_devs;
+			n_subdevs = ARRAY_SIZE(cs47l24_devs);
+		}
+		break;
 	case 0x8997:
 		if (IS_ENABLED(CONFIG_MFD_WM8997)) {
 			type_name = "WM8997";
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 3d425e9..682bc86 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -30,11 +30,13 @@ static int arizona_map_irq(struct arizona *arizona, int irq)
 {
 	int ret;
 
-	ret = regmap_irq_get_virq(arizona->aod_irq_chip, irq);
-	if (ret < 0)
-		ret = regmap_irq_get_virq(arizona->irq_chip, irq);
+	if (arizona->aod_irq_chip) {
+		ret = regmap_irq_get_virq(arizona->aod_irq_chip, irq);
+		if (ret >= 0)
+			return ret;
+	}
 
-	return ret;
+	return regmap_irq_get_virq(arizona->irq_chip, irq);
 }
 
 int arizona_request_irq(struct arizona *arizona, int irq, char *name,
@@ -107,8 +109,8 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
 	do {
 		poll = false;
 
-		/* Always handle the AoD domain */
-		handle_nested_irq(irq_find_mapping(arizona->virq, 0));
+		if (arizona->aod_irq_chip)
+			handle_nested_irq(irq_find_mapping(arizona->virq, 0));
 
 		/*
 		 * Check if one of the main interrupts is asserted and only
@@ -219,6 +221,15 @@ int arizona_irq_init(struct arizona *arizona)
 		arizona->ctrlif_error = false;
 		break;
 #endif
+#ifdef CONFIG_MFD_CS47L24
+	case WM1831:
+	case CS47L24:
+		aod = NULL;
+		irq = &cs47l24_irq;
+
+		arizona->ctrlif_error = false;
+		break;
+#endif
 #ifdef CONFIG_MFD_WM8997
 	case WM8997:
 		aod = &wm8997_aod;
@@ -291,13 +302,16 @@ int arizona_irq_init(struct arizona *arizona)
 		goto err;
 	}
 
-	ret = regmap_add_irq_chip(arizona->regmap,
-				  irq_create_mapping(arizona->virq, 0),
-				  IRQF_ONESHOT, 0, aod,
-				  &arizona->aod_irq_chip);
-	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to add AOD IRQs: %d\n", ret);
-		goto err_domain;
+	if (aod) {
+		ret = regmap_add_irq_chip(arizona->regmap,
+					  irq_create_mapping(arizona->virq, 0),
+					  IRQF_ONESHOT, 0, aod,
+					  &arizona->aod_irq_chip);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to add AOD IRQs: %d\n", ret);
+			goto err_domain;
+		}
 	}
 
 	ret = regmap_add_irq_chip(arizona->regmap,
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index befbc89..5c1ccde 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -46,6 +46,11 @@ static int arizona_spi_probe(struct spi_device *spi)
 		if (IS_ENABLED(CONFIG_MFD_WM5110))
 			regmap_config = &wm5110_spi_regmap;
 		break;
+	case WM1831:
+	case CS47L24:
+		if (IS_ENABLED(CONFIG_MFD_CS47L24))
+			regmap_config = &cs47l24_spi_regmap;
+		break;
 	default:
 		dev_err(&spi->dev, "Unknown device type %ld\n", type);
 		return -EINVAL;
@@ -89,6 +94,8 @@ static const struct spi_device_id arizona_spi_ids[] = {
 	{ "wm5102", WM5102 },
 	{ "wm5110", WM5110 },
 	{ "wm8280", WM8280 },
+	{ "wm1831", WM1831 },
+	{ "cs47l24", CS47L24 },
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
diff --git a/drivers/mfd/arizona.h b/drivers/mfd/arizona.h
index 3af12e9..198e9ce 100644
--- a/drivers/mfd/arizona.h
+++ b/drivers/mfd/arizona.h
@@ -25,6 +25,8 @@ extern const struct regmap_config wm5102_spi_regmap;
 extern const struct regmap_config wm5110_i2c_regmap;
 extern const struct regmap_config wm5110_spi_regmap;
 
+extern const struct regmap_config cs47l24_spi_regmap;
+
 extern const struct regmap_config wm8997_i2c_regmap;
 
 extern const struct regmap_config wm8998_i2c_regmap;
@@ -40,6 +42,8 @@ extern const struct regmap_irq_chip wm5110_aod;
 extern const struct regmap_irq_chip wm5110_irq;
 extern const struct regmap_irq_chip wm5110_revd_irq;
 
+extern const struct regmap_irq_chip cs47l24_irq;
+
 extern const struct regmap_irq_chip wm8997_aod;
 extern const struct regmap_irq_chip wm8997_irq;
 
diff --git a/drivers/mfd/cs47l24-tables.c b/drivers/mfd/cs47l24-tables.c
new file mode 100644
index 0000000..8708006
--- /dev/null
+++ b/drivers/mfd/cs47l24-tables.c
@@ -0,0 +1,1629 @@
+/*
+ * Data tables for CS47L24 codec
+ *
+ * Copyright 2015 Cirrus Logic, Inc.
+ *
+ * Author: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/registers.h>
+#include <linux/device.h>
+
+#include "arizona.h"
+
+#define CS47L24_NUM_ISR 5
+
+static const struct reg_sequence cs47l24_reva_patch[] = {
+	{ 0x80,  0x3 },
+	{ 0x27C, 0x0010 },
+	{ 0x221, 0x0070 },
+	{ 0x80,  0x0 },
+};
+
+int cs47l24_patch(struct arizona *arizona)
+{
+	return regmap_register_patch(arizona->regmap,
+				     cs47l24_reva_patch,
+				     ARRAY_SIZE(cs47l24_reva_patch));
+}
+EXPORT_SYMBOL_GPL(cs47l24_patch);
+
+static const struct regmap_irq cs47l24_irqs[ARIZONA_NUM_IRQ] = {
+	[ARIZONA_IRQ_GP2] = { .reg_offset = 0, .mask = ARIZONA_GP2_EINT1 },
+	[ARIZONA_IRQ_GP1] = { .reg_offset = 0, .mask = ARIZONA_GP1_EINT1 },
+
+	[ARIZONA_IRQ_DSP3_RAM_RDY] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP3_RAM_RDY_EINT1
+	},
+	[ARIZONA_IRQ_DSP2_RAM_RDY] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP2_RAM_RDY_EINT1
+	},
+	[ARIZONA_IRQ_DSP_IRQ8] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP_IRQ8_EINT1
+	},
+	[ARIZONA_IRQ_DSP_IRQ7] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP_IRQ7_EINT1
+	},
+	[ARIZONA_IRQ_DSP_IRQ6] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP_IRQ6_EINT1
+	},
+	[ARIZONA_IRQ_DSP_IRQ5] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP_IRQ5_EINT1
+	},
+	[ARIZONA_IRQ_DSP_IRQ4] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP_IRQ4_EINT1
+	},
+	[ARIZONA_IRQ_DSP_IRQ3] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP_IRQ3_EINT1
+	},
+	[ARIZONA_IRQ_DSP_IRQ2] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP_IRQ2_EINT1
+	},
+	[ARIZONA_IRQ_DSP_IRQ1] = {
+		.reg_offset = 1, .mask = ARIZONA_DSP_IRQ1_EINT1
+	},
+
+	[ARIZONA_IRQ_SPK_OVERHEAT_WARN] = {
+		.reg_offset = 2, .mask = ARIZONA_SPK_OVERHEAT_WARN_EINT1
+	},
+	[ARIZONA_IRQ_SPK_OVERHEAT] = {
+		.reg_offset = 2, .mask = ARIZONA_SPK_OVERHEAT_EINT1
+	},
+	[ARIZONA_IRQ_WSEQ_DONE] = {
+		.reg_offset = 2, .mask = ARIZONA_WSEQ_DONE_EINT1
+	},
+	[ARIZONA_IRQ_DRC2_SIG_DET] = {
+		.reg_offset = 2, .mask = ARIZONA_DRC2_SIG_DET_EINT1
+	},
+	[ARIZONA_IRQ_DRC1_SIG_DET] = {
+		.reg_offset = 2, .mask = ARIZONA_DRC1_SIG_DET_EINT1
+	},
+	[ARIZONA_IRQ_ASRC2_LOCK] = {
+		.reg_offset = 2, .mask = ARIZONA_ASRC2_LOCK_EINT1
+	},
+	[ARIZONA_IRQ_ASRC1_LOCK] = {
+		.reg_offset = 2, .mask = ARIZONA_ASRC1_LOCK_EINT1
+	},
+	[ARIZONA_IRQ_UNDERCLOCKED] = {
+		.reg_offset = 2, .mask = ARIZONA_UNDERCLOCKED_EINT1
+	},
+	[ARIZONA_IRQ_OVERCLOCKED] = {
+		.reg_offset = 2, .mask = ARIZONA_OVERCLOCKED_EINT1
+	},
+	[ARIZONA_IRQ_FLL2_LOCK] = {
+		.reg_offset = 2, .mask = ARIZONA_FLL2_LOCK_EINT1
+	},
+	[ARIZONA_IRQ_FLL1_LOCK] = {
+		.reg_offset = 2, .mask = ARIZONA_FLL1_LOCK_EINT1
+	},
+	[ARIZONA_IRQ_CLKGEN_ERR] = {
+		.reg_offset = 2, .mask = ARIZONA_CLKGEN_ERR_EINT1
+	},
+	[ARIZONA_IRQ_CLKGEN_ERR_ASYNC] = {
+		.reg_offset = 2, .mask = ARIZONA_CLKGEN_ERR_ASYNC_EINT1
+	},
+
+	[ARIZONA_IRQ_CTRLIF_ERR] = {
+		.reg_offset = 3, .mask = ARIZONA_V2_CTRLIF_ERR_EINT1
+	},
+	[ARIZONA_IRQ_MIXER_DROPPED_SAMPLES] = {
+		.reg_offset = 3, .mask = ARIZONA_V2_MIXER_DROPPED_SAMPLE_EINT1
+	},
+	[ARIZONA_IRQ_ASYNC_CLK_ENA_LOW] = {
+		.reg_offset = 3, .mask = ARIZONA_V2_ASYNC_CLK_ENA_LOW_EINT1
+	},
+	[ARIZONA_IRQ_SYSCLK_ENA_LOW] = {
+		.reg_offset = 3, .mask = ARIZONA_V2_SYSCLK_ENA_LOW_EINT1
+	},
+	[ARIZONA_IRQ_ISRC1_CFG_ERR] = {
+		.reg_offset = 3, .mask = ARIZONA_V2_ISRC1_CFG_ERR_EINT1
+	},
+	[ARIZONA_IRQ_ISRC2_CFG_ERR] = {
+		.reg_offset = 3, .mask = ARIZONA_V2_ISRC2_CFG_ERR_EINT1
+	},
+	[ARIZONA_IRQ_ISRC3_CFG_ERR] = {
+		.reg_offset = 3, .mask = ARIZONA_V2_ISRC3_CFG_ERR_EINT1
+	},
+	[ARIZONA_IRQ_HP1R_DONE] = {
+		.reg_offset = 3, .mask = ARIZONA_HP1R_DONE_EINT1
+	},
+	[ARIZONA_IRQ_HP1L_DONE] = {
+		.reg_offset = 3, .mask = ARIZONA_HP1L_DONE_EINT1
+	},
+
+	[ARIZONA_IRQ_BOOT_DONE] = {
+		.reg_offset = 4, .mask = ARIZONA_BOOT_DONE_EINT1
+	},
+	[ARIZONA_IRQ_ASRC_CFG_ERR] = {
+		.reg_offset = 4, .mask = ARIZONA_V2_ASRC_CFG_ERR_EINT1
+	},
+	[ARIZONA_IRQ_FLL2_CLOCK_OK] = {
+		.reg_offset = 4, .mask = ARIZONA_FLL2_CLOCK_OK_EINT1
+	},
+	[ARIZONA_IRQ_FLL1_CLOCK_OK] = {
+		.reg_offset = 4, .mask = ARIZONA_FLL1_CLOCK_OK_EINT1
+	},
+
+	[ARIZONA_IRQ_DSP_SHARED_WR_COLL] = {
+		.reg_offset = 5, .mask = ARIZONA_DSP_SHARED_WR_COLL_EINT1
+	},
+	[ARIZONA_IRQ_SPK_SHUTDOWN] = {
+		.reg_offset = 5, .mask = ARIZONA_SPK_SHUTDOWN_EINT1
+	},
+	[ARIZONA_IRQ_SPK1R_SHORT] = {
+		.reg_offset = 5, .mask = ARIZONA_SPK1R_SHORT_EINT1
+	},
+	[ARIZONA_IRQ_SPK1L_SHORT] = {
+		.reg_offset = 5, .mask = ARIZONA_SPK1L_SHORT_EINT1
+	},
+	[ARIZONA_IRQ_HP1R_SC_POS] = {
+		.reg_offset = 5, .mask = ARIZONA_HP1R_SC_POS_EINT1
+	},
+	[ARIZONA_IRQ_HP1L_SC_POS] = {
+		.reg_offset = 5, .mask = ARIZONA_HP1L_SC_POS_EINT1
+	},
+};
+
+const struct regmap_irq_chip cs47l24_irq = {
+	.name = "cs47l24 IRQ",
+	.status_base = ARIZONA_INTERRUPT_STATUS_1,
+	.mask_base = ARIZONA_INTERRUPT_STATUS_1_MASK,
+	.ack_base = ARIZONA_INTERRUPT_STATUS_1,
+	.num_regs = 6,
+	.irqs = cs47l24_irqs,
+	.num_irqs = ARRAY_SIZE(cs47l24_irqs),
+};
+EXPORT_SYMBOL_GPL(cs47l24_irq);
+
+static const struct reg_default cs47l24_reg_default[] = {
+	{ 0x00000008, 0x0019 },    /* R8     - Ctrl IF SPI CFG 1 */
+	{ 0x00000020, 0x0000 },    /* R32    - Tone Generator 1 */
+	{ 0x00000021, 0x1000 },    /* R33    - Tone Generator 2 */
+	{ 0x00000022, 0x0000 },    /* R34    - Tone Generator 3 */
+	{ 0x00000023, 0x1000 },    /* R35    - Tone Generator 4 */
+	{ 0x00000024, 0x0000 },    /* R36    - Tone Generator 5 */
+	{ 0x00000030, 0x0000 },    /* R48    - PWM Drive 1 */
+	{ 0x00000031, 0x0100 },    /* R49    - PWM Drive 2 */
+	{ 0x00000032, 0x0100 },    /* R50    - PWM Drive 3 */
+	{ 0x00000041, 0x0000 },    /* R65    - Sequence control */
+	{ 0x00000061, 0x01FF },    /* R97    - Sample Rate Sequence Select 1 */
+	{ 0x00000062, 0x01FF },    /* R98    - Sample Rate Sequence Select 2 */
+	{ 0x00000063, 0x01FF },    /* R99    - Sample Rate Sequence Select 3 */
+	{ 0x00000064, 0x01FF },    /* R100   - Sample Rate Sequence Select 4 */
+	{ 0x00000070, 0x0000 },    /* R112   - Comfort Noise Generator */
+	{ 0x00000090, 0x0000 },    /* R144   - Haptics Control 1 */
+	{ 0x00000091, 0x7FFF },    /* R145   - Haptics Control 2 */
+	{ 0x00000092, 0x0000 },    /* R146   - Haptics phase 1 intensity */
+	{ 0x00000093, 0x0000 },    /* R147   - Haptics phase 1 duration */
+	{ 0x00000094, 0x0000 },    /* R148   - Haptics phase 2 intensity */
+	{ 0x00000095, 0x0000 },    /* R149   - Haptics phase 2 duration */
+	{ 0x00000096, 0x0000 },    /* R150   - Haptics phase 3 intensity */
+	{ 0x00000097, 0x0000 },    /* R151   - Haptics phase 3 duration */
+	{ 0x00000100, 0x0002 },    /* R256   - Clock 32k 1 */
+	{ 0x00000101, 0x0504 },    /* R257   - System Clock 1 */
+	{ 0x00000102, 0x0011 },    /* R258   - Sample rate 1 */
+	{ 0x00000103, 0x0011 },    /* R259   - Sample rate 2 */
+	{ 0x00000104, 0x0011 },    /* R260   - Sample rate 3 */
+	{ 0x00000112, 0x0305 },    /* R274   - Async clock 1 */
+	{ 0x00000113, 0x0011 },    /* R275   - Async sample rate 1 */
+	{ 0x00000114, 0x0011 },    /* R276   - Async sample rate 2 */
+	{ 0x00000149, 0x0000 },    /* R329   - Output system clock */
+	{ 0x0000014A, 0x0000 },    /* R330   - Output async clock */
+	{ 0x00000152, 0x0000 },    /* R338   - Rate Estimator 1 */
+	{ 0x00000153, 0x0000 },    /* R339   - Rate Estimator 2 */
+	{ 0x00000154, 0x0000 },    /* R340   - Rate Estimator 3 */
+	{ 0x00000155, 0x0000 },    /* R341   - Rate Estimator 4 */
+	{ 0x00000156, 0x0000 },    /* R342   - Rate Estimator 5 */
+	{ 0x00000171, 0x0002 },    /* R369   - FLL1 Control 1 */
+	{ 0x00000172, 0x0008 },    /* R370   - FLL1 Control 2 */
+	{ 0x00000173, 0x0018 },    /* R371   - FLL1 Control 3 */
+	{ 0x00000174, 0x007D },    /* R372   - FLL1 Control 4 */
+	{ 0x00000175, 0x0006 },    /* R373   - FLL1 Control 5 */
+	{ 0x00000176, 0x0000 },    /* R374   - FLL1 Control 6 */
+	{ 0x00000177, 0x0281 },    /* R375   - FLL1 Loop Filter Test 1 */
+	{ 0x00000178, 0x0000 },    /* R376   - FLL1 NCO Test 0 */
+	{ 0x00000179, 0x0000 },    /* R376   - FLL1 Control 7 */
+	{ 0x00000181, 0x0000 },    /* R385   - FLL1 Synchroniser 1 */
+	{ 0x00000182, 0x0000 },    /* R386   - FLL1 Synchroniser 2 */
+	{ 0x00000183, 0x0000 },    /* R387   - FLL1 Synchroniser 3 */
+	{ 0x00000184, 0x0000 },    /* R388   - FLL1 Synchroniser 4 */
+	{ 0x00000185, 0x0000 },    /* R389   - FLL1 Synchroniser 5 */
+	{ 0x00000186, 0x0000 },    /* R390   - FLL1 Synchroniser 6 */
+	{ 0x00000187, 0x0001 },    /* R390   - FLL1 Synchroniser 7 */
+	{ 0x00000189, 0x0000 },    /* R393   - FLL1 Spread Spectrum */
+	{ 0x0000018A, 0x000C },    /* R394   - FLL1 GPIO Clock */
+	{ 0x00000191, 0x0002 },    /* R401   - FLL2 Control 1 */
+	{ 0x00000192, 0x0008 },    /* R402   - FLL2 Control 2 */
+	{ 0x00000193, 0x0018 },    /* R403   - FLL2 Control 3 */
+	{ 0x00000194, 0x007D },    /* R404   - FLL2 Control 4 */
+	{ 0x00000195, 0x000C },    /* R405   - FLL2 Control 5 */
+	{ 0x00000196, 0x0000 },    /* R406   - FLL2 Control 6 */
+	{ 0x00000197, 0x0000 },    /* R407   - FLL2 Loop Filter Test 1 */
+	{ 0x00000198, 0x0000 },    /* R408   - FLL2 NCO Test 0 */
+	{ 0x00000199, 0x0000 },    /* R408   - FLL2 Control 7 */
+	{ 0x000001A1, 0x0000 },    /* R417   - FLL2 Synchroniser 1 */
+	{ 0x000001A2, 0x0000 },    /* R418   - FLL2 Synchroniser 2 */
+	{ 0x000001A3, 0x0000 },    /* R419   - FLL2 Synchroniser 3 */
+	{ 0x000001A4, 0x0000 },    /* R420   - FLL2 Synchroniser 4 */
+	{ 0x000001A5, 0x0000 },    /* R421   - FLL2 Synchroniser 5 */
+	{ 0x000001A6, 0x0000 },    /* R422   - FLL2 Synchroniser 6 */
+	{ 0x000001A7, 0x0001 },    /* R422   - FLL2 Synchroniser 7 */
+	{ 0x000001A9, 0x0000 },    /* R425   - FLL2 Spread Spectrum */
+	{ 0x000001AA, 0x000C },    /* R426   - FLL2 GPIO Clock */
+	{ 0x00000218, 0x00E6 },    /* R536   - Mic Bias Ctrl 1 */
+	{ 0x00000219, 0x00E6 },    /* R537   - Mic Bias Ctrl 2 */
+	{ 0x00000300, 0x0000 },    /* R768   - Input Enables */
+	{ 0x00000308, 0x0000 },    /* R776   - Input Rate */
+	{ 0x00000309, 0x0022 },    /* R777   - Input Volume Ramp */
+	{ 0x0000030C, 0x0002 },    /* R780   - HPF Control */
+	{ 0x00000310, 0x2000 },    /* R784   - IN1L Control */
+	{ 0x00000311, 0x0180 },    /* R785   - ADC Digital Volume 1L */
+	{ 0x00000312, 0x0000 },    /* R786   - DMIC1L Control */
+	{ 0x00000314, 0x0000 },    /* R788   - IN1R Control */
+	{ 0x00000315, 0x0180 },    /* R789   - ADC Digital Volume 1R */
+	{ 0x00000316, 0x0000 },    /* R790   - DMIC1R Control */
+	{ 0x00000318, 0x2000 },    /* R792   - IN2L Control */
+	{ 0x00000319, 0x0180 },    /* R793   - ADC Digital Volume 2L */
+	{ 0x0000031A, 0x0000 },    /* R794   - DMIC2L Control */
+	{ 0x0000031C, 0x0000 },    /* R796   - IN2R Control */
+	{ 0x0000031D, 0x0180 },    /* R797   - ADC Digital Volume 2R */
+	{ 0x0000031E, 0x0000 },    /* R798   - DMIC2R Control */
+	{ 0x00000400, 0x0000 },    /* R1024  - Output Enables 1 */
+	{ 0x00000408, 0x0000 },    /* R1032  - Output Rate 1 */
+	{ 0x00000409, 0x0022 },    /* R1033  - Output Volume Ramp */
+	{ 0x00000410, 0x0080 },    /* R1040  - Output Path Config 1L */
+	{ 0x00000411, 0x0180 },    /* R1041  - DAC Digital Volume 1L */
+	{ 0x00000412, 0x0081 },    /* R1042  - DAC Volume Limit 1L */
+	{ 0x00000413, 0x0001 },    /* R1043  - Noise Gate Select 1L */
+	{ 0x00000415, 0x0180 },    /* R1045  - DAC Digital Volume 1R */
+	{ 0x00000416, 0x0081 },    /* R1046  - DAC Volume Limit 1R */
+	{ 0x00000417, 0x0002 },    /* R1047  - Noise Gate Select 1R */
+	{ 0x00000429, 0x0180 },    /* R1065  - DAC Digital Volume 4L */
+	{ 0x0000042A, 0x0081 },    /* R1066  - Out Volume 4L */
+	{ 0x0000042B, 0x0040 },    /* R1067  - Noise Gate Select 4L */
+	{ 0x00000450, 0x0000 },    /* R1104  - DAC AEC Control 1 */
+	{ 0x00000458, 0x0000 },    /* R1112  - Noise Gate Control */
+	{ 0x000004A0, 0x3480 },    /* R1184  - HP1 Short Circuit Ctrl */
+	{ 0x00000500, 0x000C },    /* R1280  - AIF1 BCLK Ctrl */
+	{ 0x00000501, 0x0008 },    /* R1281  - AIF1 Tx Pin Ctrl */
+	{ 0x00000502, 0x0000 },    /* R1282  - AIF1 Rx Pin Ctrl */
+	{ 0x00000503, 0x0000 },    /* R1283  - AIF1 Rate Ctrl */
+	{ 0x00000504, 0x0000 },    /* R1284  - AIF1 Format */
+	{ 0x00000506, 0x0040 },    /* R1286  - AIF1 Rx BCLK Rate */
+	{ 0x00000507, 0x1818 },    /* R1287  - AIF1 Frame Ctrl 1 */
+	{ 0x00000508, 0x1818 },    /* R1288  - AIF1 Frame Ctrl 2 */
+	{ 0x00000509, 0x0000 },    /* R1289  - AIF1 Frame Ctrl 3 */
+	{ 0x0000050A, 0x0001 },    /* R1290  - AIF1 Frame Ctrl 4 */
+	{ 0x0000050B, 0x0002 },    /* R1291  - AIF1 Frame Ctrl 5 */
+	{ 0x0000050C, 0x0003 },    /* R1292  - AIF1 Frame Ctrl 6 */
+	{ 0x0000050D, 0x0004 },    /* R1293  - AIF1 Frame Ctrl 7 */
+	{ 0x0000050E, 0x0005 },    /* R1294  - AIF1 Frame Ctrl 8 */
+	{ 0x0000050F, 0x0006 },    /* R1295  - AIF1 Frame Ctrl 9 */
+	{ 0x00000510, 0x0007 },    /* R1296  - AIF1 Frame Ctrl 10 */
+	{ 0x00000511, 0x0000 },    /* R1297  - AIF1 Frame Ctrl 11 */
+	{ 0x00000512, 0x0001 },    /* R1298  - AIF1 Frame Ctrl 12 */
+	{ 0x00000513, 0x0002 },    /* R1299  - AIF1 Frame Ctrl 13 */
+	{ 0x00000514, 0x0003 },    /* R1300  - AIF1 Frame Ctrl 14 */
+	{ 0x00000515, 0x0004 },    /* R1301  - AIF1 Frame Ctrl 15 */
+	{ 0x00000516, 0x0005 },    /* R1302  - AIF1 Frame Ctrl 16 */
+	{ 0x00000517, 0x0006 },    /* R1303  - AIF1 Frame Ctrl 17 */
+	{ 0x00000518, 0x0007 },    /* R1304  - AIF1 Frame Ctrl 18 */
+	{ 0x00000519, 0x0000 },    /* R1305  - AIF1 Tx Enables */
+	{ 0x0000051A, 0x0000 },    /* R1306  - AIF1 Rx Enables */
+	{ 0x00000540, 0x000C },    /* R1344  - AIF2 BCLK Ctrl */
+	{ 0x00000541, 0x0008 },    /* R1345  - AIF2 Tx Pin Ctrl */
+	{ 0x00000542, 0x0000 },    /* R1346  - AIF2 Rx Pin Ctrl */
+	{ 0x00000543, 0x0000 },    /* R1347  - AIF2 Rate Ctrl */
+	{ 0x00000544, 0x0000 },    /* R1348  - AIF2 Format */
+	{ 0x00000546, 0x0040 },    /* R1350  - AIF2 Rx BCLK Rate */
+	{ 0x00000547, 0x1818 },    /* R1351  - AIF2 Frame Ctrl 1 */
+	{ 0x00000548, 0x1818 },    /* R1352  - AIF2 Frame Ctrl 2 */
+	{ 0x00000549, 0x0000 },    /* R1353  - AIF2 Frame Ctrl 3 */
+	{ 0x0000054A, 0x0001 },    /* R1354  - AIF2 Frame Ctrl 4 */
+	{ 0x0000054B, 0x0002 },    /* R1355  - AIF2 Frame Ctrl 5 */
+	{ 0x0000054C, 0x0003 },    /* R1356  - AIF2 Frame Ctrl 6 */
+	{ 0x0000054D, 0x0004 },    /* R1357  - AIF2 Frame Ctrl 7 */
+	{ 0x0000054E, 0x0005 },    /* R1358  - AIF2 Frame Ctrl 8 */
+	{ 0x00000551, 0x0000 },    /* R1361  - AIF2 Frame Ctrl 11 */
+	{ 0x00000552, 0x0001 },    /* R1362  - AIF2 Frame Ctrl 12 */
+	{ 0x00000553, 0x0002 },    /* R1363  - AIF2 Frame Ctrl 13 */
+	{ 0x00000554, 0x0003 },    /* R1364  - AIF2 Frame Ctrl 14 */
+	{ 0x00000555, 0x0004 },    /* R1365  - AIF2 Frame Ctrl 15 */
+	{ 0x00000556, 0x0005 },    /* R1366  - AIF2 Frame Ctrl 16 */
+	{ 0x00000559, 0x0000 },    /* R1369  - AIF2 Tx Enables */
+	{ 0x0000055A, 0x0000 },    /* R1370  - AIF2 Rx Enables */
+	{ 0x00000580, 0x000C },    /* R1408  - AIF3 BCLK Ctrl */
+	{ 0x00000581, 0x0008 },    /* R1409  - AIF3 Tx Pin Ctrl */
+	{ 0x00000582, 0x0000 },    /* R1410  - AIF3 Rx Pin Ctrl */
+	{ 0x00000583, 0x0000 },    /* R1411  - AIF3 Rate Ctrl */
+	{ 0x00000584, 0x0000 },    /* R1412  - AIF3 Format */
+	{ 0x00000586, 0x0040 },    /* R1414  - AIF3 Rx BCLK Rate */
+	{ 0x00000587, 0x1818 },    /* R1415  - AIF3 Frame Ctrl 1 */
+	{ 0x00000588, 0x1818 },    /* R1416  - AIF3 Frame Ctrl 2 */
+	{ 0x00000589, 0x0000 },    /* R1417  - AIF3 Frame Ctrl 3 */
+	{ 0x0000058A, 0x0001 },    /* R1418  - AIF3 Frame Ctrl 4 */
+	{ 0x00000591, 0x0000 },    /* R1425  - AIF3 Frame Ctrl 11 */
+	{ 0x00000592, 0x0001 },    /* R1426  - AIF3 Frame Ctrl 12 */
+	{ 0x00000599, 0x0000 },    /* R1433  - AIF3 Tx Enables */
+	{ 0x0000059A, 0x0000 },    /* R1434  - AIF3 Rx Enables */
+	{ 0x00000640, 0x0000 },    /* R1600  - PWM1MIX Input 1 Source */
+	{ 0x00000641, 0x0080 },    /* R1601  - PWM1MIX Input 1 Volume */
+	{ 0x00000642, 0x0000 },    /* R1602  - PWM1MIX Input 2 Source */
+	{ 0x00000643, 0x0080 },    /* R1603  - PWM1MIX Input 2 Volume */
+	{ 0x00000644, 0x0000 },    /* R1604  - PWM1MIX Input 3 Source */
+	{ 0x00000645, 0x0080 },    /* R1605  - PWM1MIX Input 3 Volume */
+	{ 0x00000646, 0x0000 },    /* R1606  - PWM1MIX Input 4 Source */
+	{ 0x00000647, 0x0080 },    /* R1607  - PWM1MIX Input 4 Volume */
+	{ 0x00000648, 0x0000 },    /* R1608  - PWM2MIX Input 1 Source */
+	{ 0x00000649, 0x0080 },    /* R1609  - PWM2MIX Input 1 Volume */
+	{ 0x0000064A, 0x0000 },    /* R1610  - PWM2MIX Input 2 Source */
+	{ 0x0000064B, 0x0080 },    /* R1611  - PWM2MIX Input 2 Volume */
+	{ 0x0000064C, 0x0000 },    /* R1612  - PWM2MIX Input 3 Source */
+	{ 0x0000064D, 0x0080 },    /* R1613  - PWM2MIX Input 3 Volume */
+	{ 0x0000064E, 0x0000 },    /* R1614  - PWM2MIX Input 4 Source */
+	{ 0x0000064F, 0x0080 },    /* R1615  - PWM2MIX Input 4 Volume */
+	{ 0x00000680, 0x0000 },    /* R1664  - OUT1LMIX Input 1 Source */
+	{ 0x00000681, 0x0080 },    /* R1665  - OUT1LMIX Input 1 Volume */
+	{ 0x00000682, 0x0000 },    /* R1666  - OUT1LMIX Input 2 Source */
+	{ 0x00000683, 0x0080 },    /* R1667  - OUT1LMIX Input 2 Volume */
+	{ 0x00000684, 0x0000 },    /* R1668  - OUT1LMIX Input 3 Source */
+	{ 0x00000685, 0x0080 },    /* R1669  - OUT1LMIX Input 3 Volume */
+	{ 0x00000686, 0x0000 },    /* R1670  - OUT1LMIX Input 4 Source */
+	{ 0x00000687, 0x0080 },    /* R1671  - OUT1LMIX Input 4 Volume */
+	{ 0x00000688, 0x0000 },    /* R1672  - OUT1RMIX Input 1 Source */
+	{ 0x00000689, 0x0080 },    /* R1673  - OUT1RMIX Input 1 Volume */
+	{ 0x0000068A, 0x0000 },    /* R1674  - OUT1RMIX Input 2 Source */
+	{ 0x0000068B, 0x0080 },    /* R1675  - OUT1RMIX Input 2 Volume */
+	{ 0x0000068C, 0x0000 },    /* R1676  - OUT1RMIX Input 3 Source */
+	{ 0x0000068D, 0x0080 },    /* R1677  - OUT1RMIX Input 3 Volume */
+	{ 0x0000068E, 0x0000 },    /* R1678  - OUT1RMIX Input 4 Source */
+	{ 0x0000068F, 0x0080 },    /* R1679  - OUT1RMIX Input 4 Volume */
+	{ 0x000006B0, 0x0000 },    /* R1712  - OUT4LMIX Input 1 Source */
+	{ 0x000006B1, 0x0080 },    /* R1713  - OUT4LMIX Input 1 Volume */
+	{ 0x000006B2, 0x0000 },    /* R1714  - OUT4LMIX Input 2 Source */
+	{ 0x000006B3, 0x0080 },    /* R1715  - OUT4LMIX Input 2 Volume */
+	{ 0x000006B4, 0x0000 },    /* R1716  - OUT4LMIX Input 3 Source */
+	{ 0x000006B5, 0x0080 },    /* R1717  - OUT4LMIX Input 3 Volume */
+	{ 0x000006B6, 0x0000 },    /* R1718  - OUT4LMIX Input 4 Source */
+	{ 0x000006B7, 0x0080 },    /* R1719  - OUT4LMIX Input 4 Volume */
+	{ 0x00000700, 0x0000 },    /* R1792  - AIF1TX1MIX Input 1 Source */
+	{ 0x00000701, 0x0080 },    /* R1793  - AIF1TX1MIX Input 1 Volume */
+	{ 0x00000702, 0x0000 },    /* R1794  - AIF1TX1MIX Input 2 Source */
+	{ 0x00000703, 0x0080 },    /* R1795  - AIF1TX1MIX Input 2 Volume */
+	{ 0x00000704, 0x0000 },    /* R1796  - AIF1TX1MIX Input 3 Source */
+	{ 0x00000705, 0x0080 },    /* R1797  - AIF1TX1MIX Input 3 Volume */
+	{ 0x00000706, 0x0000 },    /* R1798  - AIF1TX1MIX Input 4 Source */
+	{ 0x00000707, 0x0080 },    /* R1799  - AIF1TX1MIX Input 4 Volume */
+	{ 0x00000708, 0x0000 },    /* R1800  - AIF1TX2MIX Input 1 Source */
+	{ 0x00000709, 0x0080 },    /* R1801  - AIF1TX2MIX Input 1 Volume */
+	{ 0x0000070A, 0x0000 },    /* R1802  - AIF1TX2MIX Input 2 Source */
+	{ 0x0000070B, 0x0080 },    /* R1803  - AIF1TX2MIX Input 2 Volume */
+	{ 0x0000070C, 0x0000 },    /* R1804  - AIF1TX2MIX Input 3 Source */
+	{ 0x0000070D, 0x0080 },    /* R1805  - AIF1TX2MIX Input 3 Volume */
+	{ 0x0000070E, 0x0000 },    /* R1806  - AIF1TX2MIX Input 4 Source */
+	{ 0x0000070F, 0x0080 },    /* R1807  - AIF1TX2MIX Input 4 Volume */
+	{ 0x00000710, 0x0000 },    /* R1808  - AIF1TX3MIX Input 1 Source */
+	{ 0x00000711, 0x0080 },    /* R1809  - AIF1TX3MIX Input 1 Volume */
+	{ 0x00000712, 0x0000 },    /* R1810  - AIF1TX3MIX Input 2 Source */
+	{ 0x00000713, 0x0080 },    /* R1811  - AIF1TX3MIX Input 2 Volume */
+	{ 0x00000714, 0x0000 },    /* R1812  - AIF1TX3MIX Input 3 Source */
+	{ 0x00000715, 0x0080 },    /* R1813  - AIF1TX3MIX Input 3 Volume */
+	{ 0x00000716, 0x0000 },    /* R1814  - AIF1TX3MIX Input 4 Source */
+	{ 0x00000717, 0x0080 },    /* R1815  - AIF1TX3MIX Input 4 Volume */
+	{ 0x00000718, 0x0000 },    /* R1816  - AIF1TX4MIX Input 1 Source */
+	{ 0x00000719, 0x0080 },    /* R1817  - AIF1TX4MIX Input 1 Volume */
+	{ 0x0000071A, 0x0000 },    /* R1818  - AIF1TX4MIX Input 2 Source */
+	{ 0x0000071B, 0x0080 },    /* R1819  - AIF1TX4MIX Input 2 Volume */
+	{ 0x0000071C, 0x0000 },    /* R1820  - AIF1TX4MIX Input 3 Source */
+	{ 0x0000071D, 0x0080 },    /* R1821  - AIF1TX4MIX Input 3 Volume */
+	{ 0x0000071E, 0x0000 },    /* R1822  - AIF1TX4MIX Input 4 Source */
+	{ 0x0000071F, 0x0080 },    /* R1823  - AIF1TX4MIX Input 4 Volume */
+	{ 0x00000720, 0x0000 },    /* R1824  - AIF1TX5MIX Input 1 Source */
+	{ 0x00000721, 0x0080 },    /* R1825  - AIF1TX5MIX Input 1 Volume */
+	{ 0x00000722, 0x0000 },    /* R1826  - AIF1TX5MIX Input 2 Source */
+	{ 0x00000723, 0x0080 },    /* R1827  - AIF1TX5MIX Input 2 Volume */
+	{ 0x00000724, 0x0000 },    /* R1828  - AIF1TX5MIX Input 3 Source */
+	{ 0x00000725, 0x0080 },    /* R1829  - AIF1TX5MIX Input 3 Volume */
+	{ 0x00000726, 0x0000 },    /* R1830  - AIF1TX5MIX Input 4 Source */
+	{ 0x00000727, 0x0080 },    /* R1831  - AIF1TX5MIX Input 4 Volume */
+	{ 0x00000728, 0x0000 },    /* R1832  - AIF1TX6MIX Input 1 Source */
+	{ 0x00000729, 0x0080 },    /* R1833  - AIF1TX6MIX Input 1 Volume */
+	{ 0x0000072A, 0x0000 },    /* R1834  - AIF1TX6MIX Input 2 Source */
+	{ 0x0000072B, 0x0080 },    /* R1835  - AIF1TX6MIX Input 2 Volume */
+	{ 0x0000072C, 0x0000 },    /* R1836  - AIF1TX6MIX Input 3 Source */
+	{ 0x0000072D, 0x0080 },    /* R1837  - AIF1TX6MIX Input 3 Volume */
+	{ 0x0000072E, 0x0000 },    /* R1838  - AIF1TX6MIX Input 4 Source */
+	{ 0x0000072F, 0x0080 },    /* R1839  - AIF1TX6MIX Input 4 Volume */
+	{ 0x00000730, 0x0000 },    /* R1840  - AIF1TX7MIX Input 1 Source */
+	{ 0x00000731, 0x0080 },    /* R1841  - AIF1TX7MIX Input 1 Volume */
+	{ 0x00000732, 0x0000 },    /* R1842  - AIF1TX7MIX Input 2 Source */
+	{ 0x00000733, 0x0080 },    /* R1843  - AIF1TX7MIX Input 2 Volume */
+	{ 0x00000734, 0x0000 },    /* R1844  - AIF1TX7MIX Input 3 Source */
+	{ 0x00000735, 0x0080 },    /* R1845  - AIF1TX7MIX Input 3 Volume */
+	{ 0x00000736, 0x0000 },    /* R1846  - AIF1TX7MIX Input 4 Source */
+	{ 0x00000737, 0x0080 },    /* R1847  - AIF1TX7MIX Input 4 Volume */
+	{ 0x00000738, 0x0000 },    /* R1848  - AIF1TX8MIX Input 1 Source */
+	{ 0x00000739, 0x0080 },    /* R1849  - AIF1TX8MIX Input 1 Volume */
+	{ 0x0000073A, 0x0000 },    /* R1850  - AIF1TX8MIX Input 2 Source */
+	{ 0x0000073B, 0x0080 },    /* R1851  - AIF1TX8MIX Input 2 Volume */
+	{ 0x0000073C, 0x0000 },    /* R1852  - AIF1TX8MIX Input 3 Source */
+	{ 0x0000073D, 0x0080 },    /* R1853  - AIF1TX8MIX Input 3 Volume */
+	{ 0x0000073E, 0x0000 },    /* R1854  - AIF1TX8MIX Input 4 Source */
+	{ 0x0000073F, 0x0080 },    /* R1855  - AIF1TX8MIX Input 4 Volume */
+	{ 0x00000740, 0x0000 },    /* R1856  - AIF2TX1MIX Input 1 Source */
+	{ 0x00000741, 0x0080 },    /* R1857  - AIF2TX1MIX Input 1 Volume */
+	{ 0x00000742, 0x0000 },    /* R1858  - AIF2TX1MIX Input 2 Source */
+	{ 0x00000743, 0x0080 },    /* R1859  - AIF2TX1MIX Input 2 Volume */
+	{ 0x00000744, 0x0000 },    /* R1860  - AIF2TX1MIX Input 3 Source */
+	{ 0x00000745, 0x0080 },    /* R1861  - AIF2TX1MIX Input 3 Volume */
+	{ 0x00000746, 0x0000 },    /* R1862  - AIF2TX1MIX Input 4 Source */
+	{ 0x00000747, 0x0080 },    /* R1863  - AIF2TX1MIX Input 4 Volume */
+	{ 0x00000748, 0x0000 },    /* R1864  - AIF2TX2MIX Input 1 Source */
+	{ 0x00000749, 0x0080 },    /* R1865  - AIF2TX2MIX Input 1 Volume */
+	{ 0x0000074A, 0x0000 },    /* R1866  - AIF2TX2MIX Input 2 Source */
+	{ 0x0000074B, 0x0080 },    /* R1867  - AIF2TX2MIX Input 2 Volume */
+	{ 0x0000074C, 0x0000 },    /* R1868  - AIF2TX2MIX Input 3 Source */
+	{ 0x0000074D, 0x0080 },    /* R1869  - AIF2TX2MIX Input 3 Volume */
+	{ 0x0000074E, 0x0000 },    /* R1870  - AIF2TX2MIX Input 4 Source */
+	{ 0x0000074F, 0x0080 },    /* R1871  - AIF2TX2MIX Input 4 Volume */
+	{ 0x00000750, 0x0000 },    /* R1872  - AIF2TX3MIX Input 1 Source */
+	{ 0x00000751, 0x0080 },    /* R1873  - AIF2TX3MIX Input 1 Volume */
+	{ 0x00000752, 0x0000 },    /* R1874  - AIF2TX3MIX Input 2 Source */
+	{ 0x00000753, 0x0080 },    /* R1875  - AIF2TX3MIX Input 2 Volume */
+	{ 0x00000754, 0x0000 },    /* R1876  - AIF2TX3MIX Input 3 Source */
+	{ 0x00000755, 0x0080 },    /* R1877  - AIF2TX3MIX Input 3 Volume */
+	{ 0x00000756, 0x0000 },    /* R1878  - AIF2TX3MIX Input 4 Source */
+	{ 0x00000757, 0x0080 },    /* R1879  - AIF2TX3MIX Input 4 Volume */
+	{ 0x00000758, 0x0000 },    /* R1880  - AIF2TX4MIX Input 1 Source */
+	{ 0x00000759, 0x0080 },    /* R1881  - AIF2TX4MIX Input 1 Volume */
+	{ 0x0000075A, 0x0000 },    /* R1882  - AIF2TX4MIX Input 2 Source */
+	{ 0x0000075B, 0x0080 },    /* R1883  - AIF2TX4MIX Input 2 Volume */
+	{ 0x0000075C, 0x0000 },    /* R1884  - AIF2TX4MIX Input 3 Source */
+	{ 0x0000075D, 0x0080 },    /* R1885  - AIF2TX4MIX Input 3 Volume */
+	{ 0x0000075E, 0x0000 },    /* R1886  - AIF2TX4MIX Input 4 Source */
+	{ 0x0000075F, 0x0080 },    /* R1887  - AIF2TX4MIX Input 4 Volume */
+	{ 0x00000760, 0x0000 },    /* R1888  - AIF2TX5MIX Input 1 Source */
+	{ 0x00000761, 0x0080 },    /* R1889  - AIF2TX5MIX Input 1 Volume */
+	{ 0x00000762, 0x0000 },    /* R1890  - AIF2TX5MIX Input 2 Source */
+	{ 0x00000763, 0x0080 },    /* R1891  - AIF2TX5MIX Input 2 Volume */
+	{ 0x00000764, 0x0000 },    /* R1892  - AIF2TX5MIX Input 3 Source */
+	{ 0x00000765, 0x0080 },    /* R1893  - AIF2TX5MIX Input 3 Volume */
+	{ 0x00000766, 0x0000 },    /* R1894  - AIF2TX5MIX Input 4 Source */
+	{ 0x00000767, 0x0080 },    /* R1895  - AIF2TX5MIX Input 4 Volume */
+	{ 0x00000768, 0x0000 },    /* R1896  - AIF2TX6MIX Input 1 Source */
+	{ 0x00000769, 0x0080 },    /* R1897  - AIF2TX6MIX Input 1 Volume */
+	{ 0x0000076A, 0x0000 },    /* R1898  - AIF2TX6MIX Input 2 Source */
+	{ 0x0000076B, 0x0080 },    /* R1899  - AIF2TX6MIX Input 2 Volume */
+	{ 0x0000076C, 0x0000 },    /* R1900  - AIF2TX6MIX Input 3 Source */
+	{ 0x0000076D, 0x0080 },    /* R1901  - AIF2TX6MIX Input 3 Volume */
+	{ 0x0000076E, 0x0000 },    /* R1902  - AIF2TX6MIX Input 4 Source */
+	{ 0x0000076F, 0x0080 },    /* R1903  - AIF2TX6MIX Input 4 Volume */
+	{ 0x00000780, 0x0000 },    /* R1920  - AIF3TX1MIX Input 1 Source */
+	{ 0x00000781, 0x0080 },    /* R1921  - AIF3TX1MIX Input 1 Volume */
+	{ 0x00000782, 0x0000 },    /* R1922  - AIF3TX1MIX Input 2 Source */
+	{ 0x00000783, 0x0080 },    /* R1923  - AIF3TX1MIX Input 2 Volume */
+	{ 0x00000784, 0x0000 },    /* R1924  - AIF3TX1MIX Input 3 Source */
+	{ 0x00000785, 0x0080 },    /* R1925  - AIF3TX1MIX Input 3 Volume */
+	{ 0x00000786, 0x0000 },    /* R1926  - AIF3TX1MIX Input 4 Source */
+	{ 0x00000787, 0x0080 },    /* R1927  - AIF3TX1MIX Input 4 Volume */
+	{ 0x00000788, 0x0000 },    /* R1928  - AIF3TX2MIX Input 1 Source */
+	{ 0x00000789, 0x0080 },    /* R1929  - AIF3TX2MIX Input 1 Volume */
+	{ 0x0000078A, 0x0000 },    /* R1930  - AIF3TX2MIX Input 2 Source */
+	{ 0x0000078B, 0x0080 },    /* R1931  - AIF3TX2MIX Input 2 Volume */
+	{ 0x0000078C, 0x0000 },    /* R1932  - AIF3TX2MIX Input 3 Source */
+	{ 0x0000078D, 0x0080 },    /* R1933  - AIF3TX2MIX Input 3 Volume */
+	{ 0x0000078E, 0x0000 },    /* R1934  - AIF3TX2MIX Input 4 Source */
+	{ 0x0000078F, 0x0080 },    /* R1935  - AIF3TX2MIX Input 4 Volume */
+	{ 0x00000880, 0x0000 },    /* R2176  - EQ1MIX Input 1 Source */
+	{ 0x00000881, 0x0080 },    /* R2177  - EQ1MIX Input 1 Volume */
+	{ 0x00000882, 0x0000 },    /* R2178  - EQ1MIX Input 2 Source */
+	{ 0x00000883, 0x0080 },    /* R2179  - EQ1MIX Input 2 Volume */
+	{ 0x00000884, 0x0000 },    /* R2180  - EQ1MIX Input 3 Source */
+	{ 0x00000885, 0x0080 },    /* R2181  - EQ1MIX Input 3 Volume */
+	{ 0x00000886, 0x0000 },    /* R2182  - EQ1MIX Input 4 Source */
+	{ 0x00000887, 0x0080 },    /* R2183  - EQ1MIX Input 4 Volume */
+	{ 0x00000888, 0x0000 },    /* R2184  - EQ2MIX Input 1 Source */
+	{ 0x00000889, 0x0080 },    /* R2185  - EQ2MIX Input 1 Volume */
+	{ 0x0000088A, 0x0000 },    /* R2186  - EQ2MIX Input 2 Source */
+	{ 0x0000088B, 0x0080 },    /* R2187  - EQ2MIX Input 2 Volume */
+	{ 0x0000088C, 0x0000 },    /* R2188  - EQ2MIX Input 3 Source */
+	{ 0x0000088D, 0x0080 },    /* R2189  - EQ2MIX Input 3 Volume */
+	{ 0x0000088E, 0x0000 },    /* R2190  - EQ2MIX Input 4 Source */
+	{ 0x0000088F, 0x0080 },    /* R2191  - EQ2MIX Input 4 Volume */
+	{ 0x000008C0, 0x0000 },    /* R2240  - DRC1LMIX Input 1 Source */
+	{ 0x000008C1, 0x0080 },    /* R2241  - DRC1LMIX Input 1 Volume */
+	{ 0x000008C2, 0x0000 },    /* R2242  - DRC1LMIX Input 2 Source */
+	{ 0x000008C3, 0x0080 },    /* R2243  - DRC1LMIX Input 2 Volume */
+	{ 0x000008C4, 0x0000 },    /* R2244  - DRC1LMIX Input 3 Source */
+	{ 0x000008C5, 0x0080 },    /* R2245  - DRC1LMIX Input 3 Volume */
+	{ 0x000008C6, 0x0000 },    /* R2246  - DRC1LMIX Input 4 Source */
+	{ 0x000008C7, 0x0080 },    /* R2247  - DRC1LMIX Input 4 Volume */
+	{ 0x000008C8, 0x0000 },    /* R2248  - DRC1RMIX Input 1 Source */
+	{ 0x000008C9, 0x0080 },    /* R2249  - DRC1RMIX Input 1 Volume */
+	{ 0x000008CA, 0x0000 },    /* R2250  - DRC1RMIX Input 2 Source */
+	{ 0x000008CB, 0x0080 },    /* R2251  - DRC1RMIX Input 2 Volume */
+	{ 0x000008CC, 0x0000 },    /* R2252  - DRC1RMIX Input 3 Source */
+	{ 0x000008CD, 0x0080 },    /* R2253  - DRC1RMIX Input 3 Volume */
+	{ 0x000008CE, 0x0000 },    /* R2254  - DRC1RMIX Input 4 Source */
+	{ 0x000008CF, 0x0080 },    /* R2255  - DRC1RMIX Input 4 Volume */
+	{ 0x000008D0, 0x0000 },    /* R2256  - DRC2LMIX Input 1 Source */
+	{ 0x000008D1, 0x0080 },    /* R2257  - DRC2LMIX Input 1 Volume */
+	{ 0x000008D2, 0x0000 },    /* R2258  - DRC2LMIX Input 2 Source */
+	{ 0x000008D3, 0x0080 },    /* R2259  - DRC2LMIX Input 2 Volume */
+	{ 0x000008D4, 0x0000 },    /* R2260  - DRC2LMIX Input 3 Source */
+	{ 0x000008D5, 0x0080 },    /* R2261  - DRC2LMIX Input 3 Volume */
+	{ 0x000008D6, 0x0000 },    /* R2262  - DRC2LMIX Input 4 Source */
+	{ 0x000008D7, 0x0080 },    /* R2263  - DRC2LMIX Input 4 Volume */
+	{ 0x000008D8, 0x0000 },    /* R2264  - DRC2RMIX Input 1 Source */
+	{ 0x000008D9, 0x0080 },    /* R2265  - DRC2RMIX Input 1 Volume */
+	{ 0x000008DA, 0x0000 },    /* R2266  - DRC2RMIX Input 2 Source */
+	{ 0x000008DB, 0x0080 },    /* R2267  - DRC2RMIX Input 2 Volume */
+	{ 0x000008DC, 0x0000 },    /* R2268  - DRC2RMIX Input 3 Source */
+	{ 0x000008DD, 0x0080 },    /* R2269  - DRC2RMIX Input 3 Volume */
+	{ 0x000008DE, 0x0000 },    /* R2270  - DRC2RMIX Input 4 Source */
+	{ 0x000008DF, 0x0080 },    /* R2271  - DRC2RMIX Input 4 Volume */
+	{ 0x00000900, 0x0000 },    /* R2304  - HPLP1MIX Input 1 Source */
+	{ 0x00000901, 0x0080 },    /* R2305  - HPLP1MIX Input 1 Volume */
+	{ 0x00000902, 0x0000 },    /* R2306  - HPLP1MIX Input 2 Source */
+	{ 0x00000903, 0x0080 },    /* R2307  - HPLP1MIX Input 2 Volume */
+	{ 0x00000904, 0x0000 },    /* R2308  - HPLP1MIX Input 3 Source */
+	{ 0x00000905, 0x0080 },    /* R2309  - HPLP1MIX Input 3 Volume */
+	{ 0x00000906, 0x0000 },    /* R2310  - HPLP1MIX Input 4 Source */
+	{ 0x00000907, 0x0080 },    /* R2311  - HPLP1MIX Input 4 Volume */
+	{ 0x00000908, 0x0000 },    /* R2312  - HPLP2MIX Input 1 Source */
+	{ 0x00000909, 0x0080 },    /* R2313  - HPLP2MIX Input 1 Volume */
+	{ 0x0000090A, 0x0000 },    /* R2314  - HPLP2MIX Input 2 Source */
+	{ 0x0000090B, 0x0080 },    /* R2315  - HPLP2MIX Input 2 Volume */
+	{ 0x0000090C, 0x0000 },    /* R2316  - HPLP2MIX Input 3 Source */
+	{ 0x0000090D, 0x0080 },    /* R2317  - HPLP2MIX Input 3 Volume */
+	{ 0x0000090E, 0x0000 },    /* R2318  - HPLP2MIX Input 4 Source */
+	{ 0x0000090F, 0x0080 },    /* R2319  - HPLP2MIX Input 4 Volume */
+	{ 0x00000910, 0x0000 },    /* R2320  - HPLP3MIX Input 1 Source */
+	{ 0x00000911, 0x0080 },    /* R2321  - HPLP3MIX Input 1 Volume */
+	{ 0x00000912, 0x0000 },    /* R2322  - HPLP3MIX Input 2 Source */
+	{ 0x00000913, 0x0080 },    /* R2323  - HPLP3MIX Input 2 Volume */
+	{ 0x00000914, 0x0000 },    /* R2324  - HPLP3MIX Input 3 Source */
+	{ 0x00000915, 0x0080 },    /* R2325  - HPLP3MIX Input 3 Volume */
+	{ 0x00000916, 0x0000 },    /* R2326  - HPLP3MIX Input 4 Source */
+	{ 0x00000917, 0x0080 },    /* R2327  - HPLP3MIX Input 4 Volume */
+	{ 0x00000918, 0x0000 },    /* R2328  - HPLP4MIX Input 1 Source */
+	{ 0x00000919, 0x0080 },    /* R2329  - HPLP4MIX Input 1 Volume */
+	{ 0x0000091A, 0x0000 },    /* R2330  - HPLP4MIX Input 2 Source */
+	{ 0x0000091B, 0x0080 },    /* R2331  - HPLP4MIX Input 2 Volume */
+	{ 0x0000091C, 0x0000 },    /* R2332  - HPLP4MIX Input 3 Source */
+	{ 0x0000091D, 0x0080 },    /* R2333  - HPLP4MIX Input 3 Volume */
+	{ 0x0000091E, 0x0000 },    /* R2334  - HPLP4MIX Input 4 Source */
+	{ 0x0000091F, 0x0080 },    /* R2335  - HPLP4MIX Input 4 Volume */
+	{ 0x00000980, 0x0000 },    /* R2432  - DSP2LMIX Input 1 Source */
+	{ 0x00000981, 0x0080 },    /* R2433  - DSP2LMIX Input 1 Volume */
+	{ 0x00000982, 0x0000 },    /* R2434  - DSP2LMIX Input 2 Source */
+	{ 0x00000983, 0x0080 },    /* R2435  - DSP2LMIX Input 2 Volume */
+	{ 0x00000984, 0x0000 },    /* R2436  - DSP2LMIX Input 3 Source */
+	{ 0x00000985, 0x0080 },    /* R2437  - DSP2LMIX Input 3 Volume */
+	{ 0x00000986, 0x0000 },    /* R2438  - DSP2LMIX Input 4 Source */
+	{ 0x00000987, 0x0080 },    /* R2439  - DSP2LMIX Input 4 Volume */
+	{ 0x00000988, 0x0000 },    /* R2440  - DSP2RMIX Input 1 Source */
+	{ 0x00000989, 0x0080 },    /* R2441  - DSP2RMIX Input 1 Volume */
+	{ 0x0000098A, 0x0000 },    /* R2442  - DSP2RMIX Input 2 Source */
+	{ 0x0000098B, 0x0080 },    /* R2443  - DSP2RMIX Input 2 Volume */
+	{ 0x0000098C, 0x0000 },    /* R2444  - DSP2RMIX Input 3 Source */
+	{ 0x0000098D, 0x0080 },    /* R2445  - DSP2RMIX Input 3 Volume */
+	{ 0x0000098E, 0x0000 },    /* R2446  - DSP2RMIX Input 4 Source */
+	{ 0x0000098F, 0x0080 },    /* R2447  - DSP2RMIX Input 4 Volume */
+	{ 0x00000990, 0x0000 },    /* R2448  - DSP2AUX1MIX Input 1 Source */
+	{ 0x00000998, 0x0000 },    /* R2456  - DSP2AUX2MIX Input 1 Source */
+	{ 0x000009A0, 0x0000 },    /* R2464  - DSP2AUX3MIX Input 1 Source */
+	{ 0x000009A8, 0x0000 },    /* R2472  - DSP2AUX4MIX Input 1 Source */
+	{ 0x000009B0, 0x0000 },    /* R2480  - DSP2AUX5MIX Input 1 Source */
+	{ 0x000009B8, 0x0000 },    /* R2488  - DSP2AUX6MIX Input 1 Source */
+	{ 0x000009C0, 0x0000 },    /* R2496  - DSP3LMIX Input 1 Source */
+	{ 0x000009C1, 0x0080 },    /* R2497  - DSP3LMIX Input 1 Volume */
+	{ 0x000009C2, 0x0000 },    /* R2498  - DSP3LMIX Input 2 Source */
+	{ 0x000009C3, 0x0080 },    /* R2499  - DSP3LMIX Input 2 Volume */
+	{ 0x000009C4, 0x0000 },    /* R2500  - DSP3LMIX Input 3 Source */
+	{ 0x000009C5, 0x0080 },    /* R2501  - DSP3LMIX Input 3 Volume */
+	{ 0x000009C6, 0x0000 },    /* R2502  - DSP3LMIX Input 4 Source */
+	{ 0x000009C7, 0x0080 },    /* R2503  - DSP3LMIX Input 4 Volume */
+	{ 0x000009C8, 0x0000 },    /* R2504  - DSP3RMIX Input 1 Source */
+	{ 0x000009C9, 0x0080 },    /* R2505  - DSP3RMIX Input 1 Volume */
+	{ 0x000009CA, 0x0000 },    /* R2506  - DSP3RMIX Input 2 Source */
+	{ 0x000009CB, 0x0080 },    /* R2507  - DSP3RMIX Input 2 Volume */
+	{ 0x000009CC, 0x0000 },    /* R2508  - DSP3RMIX Input 3 Source */
+	{ 0x000009CD, 0x0080 },    /* R2509  - DSP3RMIX Input 3 Volume */
+	{ 0x000009CE, 0x0000 },    /* R2510  - DSP3RMIX Input 4 Source */
+	{ 0x000009CF, 0x0080 },    /* R2511  - DSP3RMIX Input 4 Volume */
+	{ 0x000009D0, 0x0000 },    /* R2512  - DSP3AUX1MIX Input 1 Source */
+	{ 0x000009D8, 0x0000 },    /* R2520  - DSP3AUX2MIX Input 1 Source */
+	{ 0x000009E0, 0x0000 },    /* R2528  - DSP3AUX3MIX Input 1 Source */
+	{ 0x000009E8, 0x0000 },    /* R2536  - DSP3AUX4MIX Input 1 Source */
+	{ 0x000009F0, 0x0000 },    /* R2544  - DSP3AUX5MIX Input 1 Source */
+	{ 0x000009F8, 0x0000 },    /* R2552  - DSP3AUX6MIX Input 1 Source */
+	{ 0x00000A80, 0x0000 },    /* R2688  - ASRC1LMIX Input 1 Source */
+	{ 0x00000A88, 0x0000 },    /* R2696  - ASRC1RMIX Input 1 Source */
+	{ 0x00000A90, 0x0000 },    /* R2704  - ASRC2LMIX Input 1 Source */
+	{ 0x00000A98, 0x0000 },    /* R2712  - ASRC2RMIX Input 1 Source */
+	{ 0x00000B00, 0x0000 },    /* R2816  - ISRC1DEC1MIX Input 1 Source */
+	{ 0x00000B08, 0x0000 },    /* R2824  - ISRC1DEC2MIX Input 1 Source */
+	{ 0x00000B10, 0x0000 },    /* R2832  - ISRC1DEC3MIX Input 1 Source */
+	{ 0x00000B18, 0x0000 },    /* R2840  - ISRC1DEC4MIX Input 1 Source */
+	{ 0x00000B20, 0x0000 },    /* R2848  - ISRC1INT1MIX Input 1 Source */
+	{ 0x00000B28, 0x0000 },    /* R2856  - ISRC1INT2MIX Input 1 Source */
+	{ 0x00000B30, 0x0000 },    /* R2864  - ISRC1INT3MIX Input 1 Source */
+	{ 0x00000B38, 0x0000 },    /* R2872  - ISRC1INT4MIX Input 1 Source */
+	{ 0x00000B40, 0x0000 },    /* R2880  - ISRC2DEC1MIX Input 1 Source */
+	{ 0x00000B48, 0x0000 },    /* R2888  - ISRC2DEC2MIX Input 1 Source */
+	{ 0x00000B50, 0x0000 },    /* R2896  - ISRC2DEC3MIX Input 1 Source */
+	{ 0x00000B58, 0x0000 },    /* R2904  - ISRC2DEC4MIX Input 1 Source */
+	{ 0x00000B60, 0x0000 },    /* R2912  - ISRC2INT1MIX Input 1 Source */
+	{ 0x00000B68, 0x0000 },    /* R2920  - ISRC2INT2MIX Input 1 Source */
+	{ 0x00000B70, 0x0000 },    /* R2928  - ISRC2INT3MIX Input 1 Source */
+	{ 0x00000B78, 0x0000 },    /* R2936  - ISRC2INT4MIX Input 1 Source */
+	{ 0x00000B80, 0x0000 },    /* R2944  - ISRC3DEC1MIX Input 1 Source */
+	{ 0x00000B88, 0x0000 },    /* R2952  - ISRC3DEC2MIX Input 1 Source */
+	{ 0x00000B90, 0x0000 },    /* R2960  - ISRC3DEC3MIX Input 1 Source */
+	{ 0x00000B98, 0x0000 },    /* R2968  - ISRC3DEC4MIX Input 1 Source */
+	{ 0x00000BA0, 0x0000 },    /* R2976  - ISRC3INT1MIX Input 1 Source */
+	{ 0x00000BA8, 0x0000 },    /* R2984  - ISRC3INT2MIX Input 1 Source */
+	{ 0x00000BB0, 0x0000 },    /* R2992  - ISRC3INT3MIX Input 1 Source */
+	{ 0x00000BB8, 0x0000 },    /* R3000  - ISRC3INT4MIX Input 1 Source */
+	{ 0x00000C00, 0xA101 },    /* R3072  - GPIO1 CTRL */
+	{ 0x00000C01, 0xA101 },    /* R3073  - GPIO2 CTRL */
+	{ 0x00000C0F, 0x0400 },    /* R3087  - IRQ CTRL 1 */
+	{ 0x00000C10, 0x1000 },    /* R3088  - GPIO Debounce Config */
+	{ 0x00000C20, 0x0002 },    /* R3104  - Misc Pad Ctrl 1 */
+	{ 0x00000C21, 0x8001 },    /* R3105  - Misc Pad Ctrl 2 */
+	{ 0x00000C22, 0x0000 },    /* R3106  - Misc Pad Ctrl 3 */
+	{ 0x00000C23, 0x0000 },    /* R3107  - Misc Pad Ctrl 4 */
+	{ 0x00000C24, 0x0000 },    /* R3108  - Misc Pad Ctrl 5 */
+	{ 0x00000C25, 0x0000 },    /* R3109  - Misc Pad Ctrl 6 */
+	{ 0x00000C30, 0x0404 },    /* R3120  - Misc Pad Ctrl 7 */
+	{ 0x00000C32, 0x0404 },    /* R3122  - Misc Pad Ctrl 9 */
+	{ 0x00000C33, 0x0404 },    /* R3123  - Misc Pad Ctrl 10 */
+	{ 0x00000C34, 0x0404 },    /* R3124  - Misc Pad Ctrl 11 */
+	{ 0x00000C35, 0x0404 },    /* R3125  - Misc Pad Ctrl 12 */
+	{ 0x00000C36, 0x0400 },    /* R3126  - Misc Pad Ctrl 13 */
+	{ 0x00000C37, 0x0404 },    /* R3127  - Misc Pad Ctrl 14 */
+	{ 0x00000C39, 0x0400 },    /* R3129  - Misc Pad Ctrl 16 */
+	{ 0x00000D08, 0x0007 },    /* R3336  - Interrupt Status 1 Mask */
+	{ 0x00000D09, 0x06FF },    /* R3337  - Interrupt Status 2 Mask */
+	{ 0x00000D0A, 0xCFEF },    /* R3338  - Interrupt Status 3 Mask */
+	{ 0x00000D0B, 0xFFC3 },    /* R3339  - Interrupt Status 4 Mask */
+	{ 0x00000D0C, 0x000B },    /* R3340  - Interrupt Status 5 Mask */
+	{ 0x00000D0D, 0xD005 },    /* R3341  - Interrupt Status 6 Mask */
+	{ 0x00000D0F, 0x0000 },    /* R3343  - Interrupt Control */
+	{ 0x00000D18, 0x0007 },    /* R3352  - IRQ2 Status 1 Mask */
+	{ 0x00000D19, 0x06FF },    /* R3353  - IRQ2 Status 2 Mask */
+	{ 0x00000D1A, 0xCFEF },    /* R3354  - IRQ2 Status 3 Mask */
+	{ 0x00000D1B, 0xFFC3 },    /* R3355  - IRQ2 Status 4 Mask */
+	{ 0x00000D1C, 0x000B },    /* R3356  - IRQ2 Status 5 Mask */
+	{ 0x00000D1D, 0xD005 },    /* R3357  - IRQ2 Status 6 Mask */
+	{ 0x00000D1F, 0x0000 },    /* R3359  - IRQ2 Control */
+	{ 0x00000E00, 0x0000 },    /* R3584  - FX_Ctrl1 */
+	{ 0x00000E10, 0x6318 },    /* R3600  - EQ1_1 */
+	{ 0x00000E11, 0x6300 },    /* R3601  - EQ1_2 */
+	{ 0x00000E12, 0x0FC8 },    /* R3602  - EQ1_3 */
+	{ 0x00000E13, 0x03FE },    /* R3603  - EQ1_4 */
+	{ 0x00000E14, 0x00E0 },    /* R3604  - EQ1_5 */
+	{ 0x00000E15, 0x1EC4 },    /* R3605  - EQ1_6 */
+	{ 0x00000E16, 0xF136 },    /* R3606  - EQ1_7 */
+	{ 0x00000E17, 0x0409 },    /* R3607  - EQ1_8 */
+	{ 0x00000E18, 0x04CC },    /* R3608  - EQ1_9 */
+	{ 0x00000E19, 0x1C9B },    /* R3609  - EQ1_10 */
+	{ 0x00000E1A, 0xF337 },    /* R3610  - EQ1_11 */
+	{ 0x00000E1B, 0x040B },    /* R3611  - EQ1_12 */
+	{ 0x00000E1C, 0x0CBB },    /* R3612  - EQ1_13 */
+	{ 0x00000E1D, 0x16F8 },    /* R3613  - EQ1_14 */
+	{ 0x00000E1E, 0xF7D9 },    /* R3614  - EQ1_15 */
+	{ 0x00000E1F, 0x040A },    /* R3615  - EQ1_16 */
+	{ 0x00000E20, 0x1F14 },    /* R3616  - EQ1_17 */
+	{ 0x00000E21, 0x058C },    /* R3617  - EQ1_18 */
+	{ 0x00000E22, 0x0563 },    /* R3618  - EQ1_19 */
+	{ 0x00000E23, 0x4000 },    /* R3619  - EQ1_20 */
+	{ 0x00000E24, 0x0B75 },    /* R3620  - EQ1_21 */
+	{ 0x00000E26, 0x6318 },    /* R3622  - EQ2_1 */
+	{ 0x00000E27, 0x6300 },    /* R3623  - EQ2_2 */
+	{ 0x00000E28, 0x0FC8 },    /* R3624  - EQ2_3 */
+	{ 0x00000E29, 0x03FE },    /* R3625  - EQ2_4 */
+	{ 0x00000E2A, 0x00E0 },    /* R3626  - EQ2_5 */
+	{ 0x00000E2B, 0x1EC4 },    /* R3627  - EQ2_6 */
+	{ 0x00000E2C, 0xF136 },    /* R3628  - EQ2_7 */
+	{ 0x00000E2D, 0x0409 },    /* R3629  - EQ2_8 */
+	{ 0x00000E2E, 0x04CC },    /* R3630  - EQ2_9 */
+	{ 0x00000E2F, 0x1C9B },    /* R3631  - EQ2_10 */
+	{ 0x00000E30, 0xF337 },    /* R3632  - EQ2_11 */
+	{ 0x00000E31, 0x040B },    /* R3633  - EQ2_12 */
+	{ 0x00000E32, 0x0CBB },    /* R3634  - EQ2_13 */
+	{ 0x00000E33, 0x16F8 },    /* R3635  - EQ2_14 */
+	{ 0x00000E34, 0xF7D9 },    /* R3636  - EQ2_15 */
+	{ 0x00000E35, 0x040A },    /* R3637  - EQ2_16 */
+	{ 0x00000E36, 0x1F14 },    /* R3638  - EQ2_17 */
+	{ 0x00000E37, 0x058C },    /* R3639  - EQ2_18 */
+	{ 0x00000E38, 0x0563 },    /* R3640  - EQ2_19 */
+	{ 0x00000E39, 0x4000 },    /* R3641  - EQ2_20 */
+	{ 0x00000E3A, 0x0B75 },    /* R3642  - EQ2_21 */
+	{ 0x00000E80, 0x0018 },    /* R3712  - DRC1 ctrl1 */
+	{ 0x00000E81, 0x0933 },    /* R3713  - DRC1 ctrl2 */
+	{ 0x00000E82, 0x0018 },    /* R3714  - DRC1 ctrl3 */
+	{ 0x00000E83, 0x0000 },    /* R3715  - DRC1 ctrl4 */
+	{ 0x00000E84, 0x0000 },    /* R3716  - DRC1 ctrl5 */
+	{ 0x00000E89, 0x0018 },    /* R3721  - DRC2 ctrl1 */
+	{ 0x00000E8A, 0x0933 },    /* R3722  - DRC2 ctrl2 */
+	{ 0x00000E8B, 0x0018 },    /* R3723  - DRC2 ctrl3 */
+	{ 0x00000E8C, 0x0000 },    /* R3724  - DRC2 ctrl4 */
+	{ 0x00000E8D, 0x0000 },    /* R3725  - DRC2 ctrl5 */
+	{ 0x00000EC0, 0x0000 },    /* R3776  - HPLPF1_1 */
+	{ 0x00000EC1, 0x0000 },    /* R3777  - HPLPF1_2 */
+	{ 0x00000EC4, 0x0000 },    /* R3780  - HPLPF2_1 */
+	{ 0x00000EC5, 0x0000 },    /* R3781  - HPLPF2_2 */
+	{ 0x00000EC8, 0x0000 },    /* R3784  - HPLPF3_1 */
+	{ 0x00000EC9, 0x0000 },    /* R3785  - HPLPF3_2 */
+	{ 0x00000ECC, 0x0000 },    /* R3788  - HPLPF4_1 */
+	{ 0x00000ECD, 0x0000 },    /* R3789  - HPLPF4_2 */
+	{ 0x00000EE0, 0x0000 },    /* R3808  - ASRC_ENABLE */
+	{ 0x00000EE2, 0x0000 },    /* R3810  - ASRC_RATE1 */
+	{ 0x00000EE3, 0x4000 },    /* R3811  - ASRC_RATE2 */
+	{ 0x00000EF0, 0x0000 },    /* R3824  - ISRC 1 CTRL 1 */
+	{ 0x00000EF1, 0x0000 },    /* R3825  - ISRC 1 CTRL 2 */
+	{ 0x00000EF2, 0x0000 },    /* R3826  - ISRC 1 CTRL 3 */
+	{ 0x00000EF3, 0x0000 },    /* R3827  - ISRC 2 CTRL 1 */
+	{ 0x00000EF4, 0x0000 },    /* R3828  - ISRC 2 CTRL 2 */
+	{ 0x00000EF5, 0x0000 },    /* R3829  - ISRC 2 CTRL 3 */
+	{ 0x00000EF6, 0x0000 },    /* R3830  - ISRC 3 CTRL 1 */
+	{ 0x00000EF7, 0x0000 },    /* R3831  - ISRC 3 CTRL 2 */
+	{ 0x00000EF8, 0x0000 },    /* R3832  - ISRC 3 CTRL 3 */
+	{ 0x00001200, 0x0010 },    /* R4608  - DSP2 Control 1 */
+	{ 0x00001300, 0x0010 },    /* R4864  - DSP3 Control 1 */
+};
+
+static bool cs47l24_is_adsp_memory(unsigned int reg)
+{
+	switch (reg) {
+	case 0x200000 ... 0x205fff:	/* DSP2 PM */
+	case 0x280000 ... 0x281fff:	/* DSP2 ZM */
+	case 0x290000 ... 0x2a7fff:	/* DSP2 XM */
+	case 0x2a8000 ... 0x2b3fff:	/* DSP2 YM */
+	case 0x300000 ... 0x308fff:	/* DSP3 PM */
+	case 0x380000 ... 0x381fff:	/* DSP3 ZM */
+	case 0x390000 ... 0x3a7fff:	/* DSP3 XM */
+	case 0x3a8000 ... 0x3b3fff:	/* DSP3 YM */
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool cs47l24_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ARIZONA_SOFTWARE_RESET:
+	case ARIZONA_DEVICE_REVISION:
+	case ARIZONA_CTRL_IF_SPI_CFG_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
+	case ARIZONA_TONE_GENERATOR_1:
+	case ARIZONA_TONE_GENERATOR_2:
+	case ARIZONA_TONE_GENERATOR_3:
+	case ARIZONA_TONE_GENERATOR_4:
+	case ARIZONA_TONE_GENERATOR_5:
+	case ARIZONA_PWM_DRIVE_1:
+	case ARIZONA_PWM_DRIVE_2:
+	case ARIZONA_PWM_DRIVE_3:
+	case ARIZONA_SEQUENCE_CONTROL:
+	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1:
+	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2:
+	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3:
+	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4:
+	case ARIZONA_COMFORT_NOISE_GENERATOR:
+	case ARIZONA_HAPTICS_CONTROL_1:
+	case ARIZONA_HAPTICS_CONTROL_2:
+	case ARIZONA_HAPTICS_PHASE_1_INTENSITY:
+	case ARIZONA_HAPTICS_PHASE_1_DURATION:
+	case ARIZONA_HAPTICS_PHASE_2_INTENSITY:
+	case ARIZONA_HAPTICS_PHASE_2_DURATION:
+	case ARIZONA_HAPTICS_PHASE_3_INTENSITY:
+	case ARIZONA_HAPTICS_PHASE_3_DURATION:
+	case ARIZONA_HAPTICS_STATUS:
+	case ARIZONA_CLOCK_32K_1:
+	case ARIZONA_SYSTEM_CLOCK_1:
+	case ARIZONA_SAMPLE_RATE_1:
+	case ARIZONA_SAMPLE_RATE_2:
+	case ARIZONA_SAMPLE_RATE_3:
+	case ARIZONA_SAMPLE_RATE_1_STATUS:
+	case ARIZONA_SAMPLE_RATE_2_STATUS:
+	case ARIZONA_SAMPLE_RATE_3_STATUS:
+	case ARIZONA_ASYNC_CLOCK_1:
+	case ARIZONA_ASYNC_SAMPLE_RATE_1:
+	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
+	case ARIZONA_OUTPUT_SYSTEM_CLOCK:
+	case ARIZONA_OUTPUT_ASYNC_CLOCK:
+	case ARIZONA_RATE_ESTIMATOR_1:
+	case ARIZONA_RATE_ESTIMATOR_2:
+	case ARIZONA_RATE_ESTIMATOR_3:
+	case ARIZONA_RATE_ESTIMATOR_4:
+	case ARIZONA_RATE_ESTIMATOR_5:
+	case ARIZONA_FLL1_CONTROL_1:
+	case ARIZONA_FLL1_CONTROL_2:
+	case ARIZONA_FLL1_CONTROL_3:
+	case ARIZONA_FLL1_CONTROL_4:
+	case ARIZONA_FLL1_CONTROL_5:
+	case ARIZONA_FLL1_CONTROL_6:
+	case ARIZONA_FLL1_CONTROL_7:
+	case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
+	case ARIZONA_FLL1_NCO_TEST_0:
+	case ARIZONA_FLL1_SYNCHRONISER_1:
+	case ARIZONA_FLL1_SYNCHRONISER_2:
+	case ARIZONA_FLL1_SYNCHRONISER_3:
+	case ARIZONA_FLL1_SYNCHRONISER_4:
+	case ARIZONA_FLL1_SYNCHRONISER_5:
+	case ARIZONA_FLL1_SYNCHRONISER_6:
+	case ARIZONA_FLL1_SYNCHRONISER_7:
+	case ARIZONA_FLL1_SPREAD_SPECTRUM:
+	case ARIZONA_FLL1_GPIO_CLOCK:
+	case ARIZONA_FLL2_CONTROL_1:
+	case ARIZONA_FLL2_CONTROL_2:
+	case ARIZONA_FLL2_CONTROL_3:
+	case ARIZONA_FLL2_CONTROL_4:
+	case ARIZONA_FLL2_CONTROL_5:
+	case ARIZONA_FLL2_CONTROL_6:
+	case ARIZONA_FLL2_CONTROL_7:
+	case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
+	case ARIZONA_FLL2_NCO_TEST_0:
+	case ARIZONA_FLL2_SYNCHRONISER_1:
+	case ARIZONA_FLL2_SYNCHRONISER_2:
+	case ARIZONA_FLL2_SYNCHRONISER_3:
+	case ARIZONA_FLL2_SYNCHRONISER_4:
+	case ARIZONA_FLL2_SYNCHRONISER_5:
+	case ARIZONA_FLL2_SYNCHRONISER_6:
+	case ARIZONA_FLL2_SYNCHRONISER_7:
+	case ARIZONA_FLL2_SPREAD_SPECTRUM:
+	case ARIZONA_FLL2_GPIO_CLOCK:
+	case ARIZONA_MIC_BIAS_CTRL_1:
+	case ARIZONA_MIC_BIAS_CTRL_2:
+	case ARIZONA_HP_CTRL_1L:
+	case ARIZONA_HP_CTRL_1R:
+	case ARIZONA_INPUT_ENABLES:
+	case ARIZONA_INPUT_ENABLES_STATUS:
+	case ARIZONA_INPUT_RATE:
+	case ARIZONA_INPUT_VOLUME_RAMP:
+	case ARIZONA_HPF_CONTROL:
+	case ARIZONA_IN1L_CONTROL:
+	case ARIZONA_ADC_DIGITAL_VOLUME_1L:
+	case ARIZONA_DMIC1L_CONTROL:
+	case ARIZONA_IN1R_CONTROL:
+	case ARIZONA_ADC_DIGITAL_VOLUME_1R:
+	case ARIZONA_DMIC1R_CONTROL:
+	case ARIZONA_IN2L_CONTROL:
+	case ARIZONA_ADC_DIGITAL_VOLUME_2L:
+	case ARIZONA_DMIC2L_CONTROL:
+	case ARIZONA_IN2R_CONTROL:
+	case ARIZONA_ADC_DIGITAL_VOLUME_2R:
+	case ARIZONA_DMIC2R_CONTROL:
+	case ARIZONA_OUTPUT_ENABLES_1:
+	case ARIZONA_OUTPUT_STATUS_1:
+	case ARIZONA_RAW_OUTPUT_STATUS_1:
+	case ARIZONA_OUTPUT_RATE_1:
+	case ARIZONA_OUTPUT_VOLUME_RAMP:
+	case ARIZONA_OUTPUT_PATH_CONFIG_1L:
+	case ARIZONA_DAC_DIGITAL_VOLUME_1L:
+	case ARIZONA_DAC_VOLUME_LIMIT_1L:
+	case ARIZONA_NOISE_GATE_SELECT_1L:
+	case ARIZONA_DAC_DIGITAL_VOLUME_1R:
+	case ARIZONA_DAC_VOLUME_LIMIT_1R:
+	case ARIZONA_NOISE_GATE_SELECT_1R:
+	case ARIZONA_DAC_DIGITAL_VOLUME_4L:
+	case ARIZONA_OUT_VOLUME_4L:
+	case ARIZONA_NOISE_GATE_SELECT_4L:
+	case ARIZONA_DAC_AEC_CONTROL_1:
+	case ARIZONA_NOISE_GATE_CONTROL:
+	case ARIZONA_HP1_SHORT_CIRCUIT_CTRL:
+	case ARIZONA_AIF1_BCLK_CTRL:
+	case ARIZONA_AIF1_TX_PIN_CTRL:
+	case ARIZONA_AIF1_RX_PIN_CTRL:
+	case ARIZONA_AIF1_RATE_CTRL:
+	case ARIZONA_AIF1_FORMAT:
+	case ARIZONA_AIF1_RX_BCLK_RATE:
+	case ARIZONA_AIF1_FRAME_CTRL_1:
+	case ARIZONA_AIF1_FRAME_CTRL_2:
+	case ARIZONA_AIF1_FRAME_CTRL_3:
+	case ARIZONA_AIF1_FRAME_CTRL_4:
+	case ARIZONA_AIF1_FRAME_CTRL_5:
+	case ARIZONA_AIF1_FRAME_CTRL_6:
+	case ARIZONA_AIF1_FRAME_CTRL_7:
+	case ARIZONA_AIF1_FRAME_CTRL_8:
+	case ARIZONA_AIF1_FRAME_CTRL_9:
+	case ARIZONA_AIF1_FRAME_CTRL_10:
+	case ARIZONA_AIF1_FRAME_CTRL_11:
+	case ARIZONA_AIF1_FRAME_CTRL_12:
+	case ARIZONA_AIF1_FRAME_CTRL_13:
+	case ARIZONA_AIF1_FRAME_CTRL_14:
+	case ARIZONA_AIF1_FRAME_CTRL_15:
+	case ARIZONA_AIF1_FRAME_CTRL_16:
+	case ARIZONA_AIF1_FRAME_CTRL_17:
+	case ARIZONA_AIF1_FRAME_CTRL_18:
+	case ARIZONA_AIF1_TX_ENABLES:
+	case ARIZONA_AIF1_RX_ENABLES:
+	case ARIZONA_AIF2_BCLK_CTRL:
+	case ARIZONA_AIF2_TX_PIN_CTRL:
+	case ARIZONA_AIF2_RX_PIN_CTRL:
+	case ARIZONA_AIF2_RATE_CTRL:
+	case ARIZONA_AIF2_FORMAT:
+	case ARIZONA_AIF2_RX_BCLK_RATE:
+	case ARIZONA_AIF2_FRAME_CTRL_1:
+	case ARIZONA_AIF2_FRAME_CTRL_2:
+	case ARIZONA_AIF2_FRAME_CTRL_3:
+	case ARIZONA_AIF2_FRAME_CTRL_4:
+	case ARIZONA_AIF2_FRAME_CTRL_5:
+	case ARIZONA_AIF2_FRAME_CTRL_6:
+	case ARIZONA_AIF2_FRAME_CTRL_7:
+	case ARIZONA_AIF2_FRAME_CTRL_8:
+	case ARIZONA_AIF2_FRAME_CTRL_11:
+	case ARIZONA_AIF2_FRAME_CTRL_12:
+	case ARIZONA_AIF2_FRAME_CTRL_13:
+	case ARIZONA_AIF2_FRAME_CTRL_14:
+	case ARIZONA_AIF2_FRAME_CTRL_15:
+	case ARIZONA_AIF2_FRAME_CTRL_16:
+	case ARIZONA_AIF2_TX_ENABLES:
+	case ARIZONA_AIF2_RX_ENABLES:
+	case ARIZONA_AIF3_BCLK_CTRL:
+	case ARIZONA_AIF3_TX_PIN_CTRL:
+	case ARIZONA_AIF3_RX_PIN_CTRL:
+	case ARIZONA_AIF3_RATE_CTRL:
+	case ARIZONA_AIF3_FORMAT:
+	case ARIZONA_AIF3_RX_BCLK_RATE:
+	case ARIZONA_AIF3_FRAME_CTRL_1:
+	case ARIZONA_AIF3_FRAME_CTRL_2:
+	case ARIZONA_AIF3_FRAME_CTRL_3:
+	case ARIZONA_AIF3_FRAME_CTRL_4:
+	case ARIZONA_AIF3_FRAME_CTRL_11:
+	case ARIZONA_AIF3_FRAME_CTRL_12:
+	case ARIZONA_AIF3_TX_ENABLES:
+	case ARIZONA_AIF3_RX_ENABLES:
+	case ARIZONA_PWM1MIX_INPUT_1_SOURCE:
+	case ARIZONA_PWM1MIX_INPUT_1_VOLUME:
+	case ARIZONA_PWM1MIX_INPUT_2_SOURCE:
+	case ARIZONA_PWM1MIX_INPUT_2_VOLUME:
+	case ARIZONA_PWM1MIX_INPUT_3_SOURCE:
+	case ARIZONA_PWM1MIX_INPUT_3_VOLUME:
+	case ARIZONA_PWM1MIX_INPUT_4_SOURCE:
+	case ARIZONA_PWM1MIX_INPUT_4_VOLUME:
+	case ARIZONA_PWM2MIX_INPUT_1_SOURCE:
+	case ARIZONA_PWM2MIX_INPUT_1_VOLUME:
+	case ARIZONA_PWM2MIX_INPUT_2_SOURCE:
+	case ARIZONA_PWM2MIX_INPUT_2_VOLUME:
+	case ARIZONA_PWM2MIX_INPUT_3_SOURCE:
+	case ARIZONA_PWM2MIX_INPUT_3_VOLUME:
+	case ARIZONA_PWM2MIX_INPUT_4_SOURCE:
+	case ARIZONA_PWM2MIX_INPUT_4_VOLUME:
+	case ARIZONA_OUT1LMIX_INPUT_1_SOURCE:
+	case ARIZONA_OUT1LMIX_INPUT_1_VOLUME:
+	case ARIZONA_OUT1LMIX_INPUT_2_SOURCE:
+	case ARIZONA_OUT1LMIX_INPUT_2_VOLUME:
+	case ARIZONA_OUT1LMIX_INPUT_3_SOURCE:
+	case ARIZONA_OUT1LMIX_INPUT_3_VOLUME:
+	case ARIZONA_OUT1LMIX_INPUT_4_SOURCE:
+	case ARIZONA_OUT1LMIX_INPUT_4_VOLUME:
+	case ARIZONA_OUT1RMIX_INPUT_1_SOURCE:
+	case ARIZONA_OUT1RMIX_INPUT_1_VOLUME:
+	case ARIZONA_OUT1RMIX_INPUT_2_SOURCE:
+	case ARIZONA_OUT1RMIX_INPUT_2_VOLUME:
+	case ARIZONA_OUT1RMIX_INPUT_3_SOURCE:
+	case ARIZONA_OUT1RMIX_INPUT_3_VOLUME:
+	case ARIZONA_OUT1RMIX_INPUT_4_SOURCE:
+	case ARIZONA_OUT1RMIX_INPUT_4_VOLUME:
+	case ARIZONA_OUT4LMIX_INPUT_1_SOURCE:
+	case ARIZONA_OUT4LMIX_INPUT_1_VOLUME:
+	case ARIZONA_OUT4LMIX_INPUT_2_SOURCE:
+	case ARIZONA_OUT4LMIX_INPUT_2_VOLUME:
+	case ARIZONA_OUT4LMIX_INPUT_3_SOURCE:
+	case ARIZONA_OUT4LMIX_INPUT_3_VOLUME:
+	case ARIZONA_OUT4LMIX_INPUT_4_SOURCE:
+	case ARIZONA_OUT4LMIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF1TX1MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF1TX1MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF1TX1MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF1TX1MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF1TX1MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF1TX1MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF1TX1MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF1TX1MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF1TX2MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF1TX2MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF1TX2MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF1TX2MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF1TX2MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF1TX2MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF1TX2MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF1TX2MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF1TX3MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF1TX3MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF1TX3MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF1TX3MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF1TX3MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF1TX3MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF1TX3MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF1TX3MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF1TX4MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF1TX4MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF1TX4MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF1TX4MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF1TX4MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF1TX4MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF1TX4MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF1TX4MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF1TX5MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF1TX5MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF1TX5MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF1TX5MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF1TX5MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF1TX5MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF1TX5MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF1TX5MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF1TX6MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF1TX6MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF1TX6MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF1TX6MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF1TX6MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF1TX6MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF1TX6MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF1TX6MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF1TX7MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF1TX7MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF1TX7MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF1TX7MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF1TX7MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF1TX7MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF1TX7MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF1TX7MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF1TX8MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF1TX8MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF1TX8MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF1TX8MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF1TX8MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF1TX8MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF1TX8MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF1TX8MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX1MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX1MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX1MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX1MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX1MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX1MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX1MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX1MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX2MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX2MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX2MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX2MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX2MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX2MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX2MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX2MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX3MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX3MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX3MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX3MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX3MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX3MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX3MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX3MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX4MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX4MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX4MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX4MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX4MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX4MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX4MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX4MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX5MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX5MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX5MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX5MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX5MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX5MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX5MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX5MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF2TX6MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF2TX6MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF2TX6MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF2TX6MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF2TX6MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF2TX6MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF2TX6MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF2TX6MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF3TX1MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF3TX1MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF3TX1MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF3TX1MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF3TX1MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF3TX1MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF3TX1MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF3TX1MIX_INPUT_4_VOLUME:
+	case ARIZONA_AIF3TX2MIX_INPUT_1_SOURCE:
+	case ARIZONA_AIF3TX2MIX_INPUT_1_VOLUME:
+	case ARIZONA_AIF3TX2MIX_INPUT_2_SOURCE:
+	case ARIZONA_AIF3TX2MIX_INPUT_2_VOLUME:
+	case ARIZONA_AIF3TX2MIX_INPUT_3_SOURCE:
+	case ARIZONA_AIF3TX2MIX_INPUT_3_VOLUME:
+	case ARIZONA_AIF3TX2MIX_INPUT_4_SOURCE:
+	case ARIZONA_AIF3TX2MIX_INPUT_4_VOLUME:
+	case ARIZONA_EQ1MIX_INPUT_1_SOURCE:
+	case ARIZONA_EQ1MIX_INPUT_1_VOLUME:
+	case ARIZONA_EQ1MIX_INPUT_2_SOURCE:
+	case ARIZONA_EQ1MIX_INPUT_2_VOLUME:
+	case ARIZONA_EQ1MIX_INPUT_3_SOURCE:
+	case ARIZONA_EQ1MIX_INPUT_3_VOLUME:
+	case ARIZONA_EQ1MIX_INPUT_4_SOURCE:
+	case ARIZONA_EQ1MIX_INPUT_4_VOLUME:
+	case ARIZONA_EQ2MIX_INPUT_1_SOURCE:
+	case ARIZONA_EQ2MIX_INPUT_1_VOLUME:
+	case ARIZONA_EQ2MIX_INPUT_2_SOURCE:
+	case ARIZONA_EQ2MIX_INPUT_2_VOLUME:
+	case ARIZONA_EQ2MIX_INPUT_3_SOURCE:
+	case ARIZONA_EQ2MIX_INPUT_3_VOLUME:
+	case ARIZONA_EQ2MIX_INPUT_4_SOURCE:
+	case ARIZONA_EQ2MIX_INPUT_4_VOLUME:
+	case ARIZONA_DRC1LMIX_INPUT_1_SOURCE:
+	case ARIZONA_DRC1LMIX_INPUT_1_VOLUME:
+	case ARIZONA_DRC1LMIX_INPUT_2_SOURCE:
+	case ARIZONA_DRC1LMIX_INPUT_2_VOLUME:
+	case ARIZONA_DRC1LMIX_INPUT_3_SOURCE:
+	case ARIZONA_DRC1LMIX_INPUT_3_VOLUME:
+	case ARIZONA_DRC1LMIX_INPUT_4_SOURCE:
+	case ARIZONA_DRC1LMIX_INPUT_4_VOLUME:
+	case ARIZONA_DRC1RMIX_INPUT_1_SOURCE:
+	case ARIZONA_DRC1RMIX_INPUT_1_VOLUME:
+	case ARIZONA_DRC1RMIX_INPUT_2_SOURCE:
+	case ARIZONA_DRC1RMIX_INPUT_2_VOLUME:
+	case ARIZONA_DRC1RMIX_INPUT_3_SOURCE:
+	case ARIZONA_DRC1RMIX_INPUT_3_VOLUME:
+	case ARIZONA_DRC1RMIX_INPUT_4_SOURCE:
+	case ARIZONA_DRC1RMIX_INPUT_4_VOLUME:
+	case ARIZONA_DRC2LMIX_INPUT_1_SOURCE:
+	case ARIZONA_DRC2LMIX_INPUT_1_VOLUME:
+	case ARIZONA_DRC2LMIX_INPUT_2_SOURCE:
+	case ARIZONA_DRC2LMIX_INPUT_2_VOLUME:
+	case ARIZONA_DRC2LMIX_INPUT_3_SOURCE:
+	case ARIZONA_DRC2LMIX_INPUT_3_VOLUME:
+	case ARIZONA_DRC2LMIX_INPUT_4_SOURCE:
+	case ARIZONA_DRC2LMIX_INPUT_4_VOLUME:
+	case ARIZONA_DRC2RMIX_INPUT_1_SOURCE:
+	case ARIZONA_DRC2RMIX_INPUT_1_VOLUME:
+	case ARIZONA_DRC2RMIX_INPUT_2_SOURCE:
+	case ARIZONA_DRC2RMIX_INPUT_2_VOLUME:
+	case ARIZONA_DRC2RMIX_INPUT_3_SOURCE:
+	case ARIZONA_DRC2RMIX_INPUT_3_VOLUME:
+	case ARIZONA_DRC2RMIX_INPUT_4_SOURCE:
+	case ARIZONA_DRC2RMIX_INPUT_4_VOLUME:
+	case ARIZONA_HPLP1MIX_INPUT_1_SOURCE:
+	case ARIZONA_HPLP1MIX_INPUT_1_VOLUME:
+	case ARIZONA_HPLP1MIX_INPUT_2_SOURCE:
+	case ARIZONA_HPLP1MIX_INPUT_2_VOLUME:
+	case ARIZONA_HPLP1MIX_INPUT_3_SOURCE:
+	case ARIZONA_HPLP1MIX_INPUT_3_VOLUME:
+	case ARIZONA_HPLP1MIX_INPUT_4_SOURCE:
+	case ARIZONA_HPLP1MIX_INPUT_4_VOLUME:
+	case ARIZONA_HPLP2MIX_INPUT_1_SOURCE:
+	case ARIZONA_HPLP2MIX_INPUT_1_VOLUME:
+	case ARIZONA_HPLP2MIX_INPUT_2_SOURCE:
+	case ARIZONA_HPLP2MIX_INPUT_2_VOLUME:
+	case ARIZONA_HPLP2MIX_INPUT_3_SOURCE:
+	case ARIZONA_HPLP2MIX_INPUT_3_VOLUME:
+	case ARIZONA_HPLP2MIX_INPUT_4_SOURCE:
+	case ARIZONA_HPLP2MIX_INPUT_4_VOLUME:
+	case ARIZONA_HPLP3MIX_INPUT_1_SOURCE:
+	case ARIZONA_HPLP3MIX_INPUT_1_VOLUME:
+	case ARIZONA_HPLP3MIX_INPUT_2_SOURCE:
+	case ARIZONA_HPLP3MIX_INPUT_2_VOLUME:
+	case ARIZONA_HPLP3MIX_INPUT_3_SOURCE:
+	case ARIZONA_HPLP3MIX_INPUT_3_VOLUME:
+	case ARIZONA_HPLP3MIX_INPUT_4_SOURCE:
+	case ARIZONA_HPLP3MIX_INPUT_4_VOLUME:
+	case ARIZONA_HPLP4MIX_INPUT_1_SOURCE:
+	case ARIZONA_HPLP4MIX_INPUT_1_VOLUME:
+	case ARIZONA_HPLP4MIX_INPUT_2_SOURCE:
+	case ARIZONA_HPLP4MIX_INPUT_2_VOLUME:
+	case ARIZONA_HPLP4MIX_INPUT_3_SOURCE:
+	case ARIZONA_HPLP4MIX_INPUT_3_VOLUME:
+	case ARIZONA_HPLP4MIX_INPUT_4_SOURCE:
+	case ARIZONA_HPLP4MIX_INPUT_4_VOLUME:
+	case ARIZONA_DSP2LMIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP2LMIX_INPUT_1_VOLUME:
+	case ARIZONA_DSP2LMIX_INPUT_2_SOURCE:
+	case ARIZONA_DSP2LMIX_INPUT_2_VOLUME:
+	case ARIZONA_DSP2LMIX_INPUT_3_SOURCE:
+	case ARIZONA_DSP2LMIX_INPUT_3_VOLUME:
+	case ARIZONA_DSP2LMIX_INPUT_4_SOURCE:
+	case ARIZONA_DSP2LMIX_INPUT_4_VOLUME:
+	case ARIZONA_DSP2RMIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP2RMIX_INPUT_1_VOLUME:
+	case ARIZONA_DSP2RMIX_INPUT_2_SOURCE:
+	case ARIZONA_DSP2RMIX_INPUT_2_VOLUME:
+	case ARIZONA_DSP2RMIX_INPUT_3_SOURCE:
+	case ARIZONA_DSP2RMIX_INPUT_3_VOLUME:
+	case ARIZONA_DSP2RMIX_INPUT_4_SOURCE:
+	case ARIZONA_DSP2RMIX_INPUT_4_VOLUME:
+	case ARIZONA_DSP2AUX1MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP2AUX2MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP2AUX3MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP2AUX4MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP2AUX5MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP2AUX6MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP3LMIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP3LMIX_INPUT_1_VOLUME:
+	case ARIZONA_DSP3LMIX_INPUT_2_SOURCE:
+	case ARIZONA_DSP3LMIX_INPUT_2_VOLUME:
+	case ARIZONA_DSP3LMIX_INPUT_3_SOURCE:
+	case ARIZONA_DSP3LMIX_INPUT_3_VOLUME:
+	case ARIZONA_DSP3LMIX_INPUT_4_SOURCE:
+	case ARIZONA_DSP3LMIX_INPUT_4_VOLUME:
+	case ARIZONA_DSP3RMIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP3RMIX_INPUT_1_VOLUME:
+	case ARIZONA_DSP3RMIX_INPUT_2_SOURCE:
+	case ARIZONA_DSP3RMIX_INPUT_2_VOLUME:
+	case ARIZONA_DSP3RMIX_INPUT_3_SOURCE:
+	case ARIZONA_DSP3RMIX_INPUT_3_VOLUME:
+	case ARIZONA_DSP3RMIX_INPUT_4_SOURCE:
+	case ARIZONA_DSP3RMIX_INPUT_4_VOLUME:
+	case ARIZONA_DSP3AUX1MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP3AUX2MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP3AUX3MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP3AUX4MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP3AUX5MIX_INPUT_1_SOURCE:
+	case ARIZONA_DSP3AUX6MIX_INPUT_1_SOURCE:
+	case ARIZONA_ASRC1LMIX_INPUT_1_SOURCE:
+	case ARIZONA_ASRC1RMIX_INPUT_1_SOURCE:
+	case ARIZONA_ASRC2LMIX_INPUT_1_SOURCE:
+	case ARIZONA_ASRC2RMIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC1DEC1MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC1DEC2MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC1DEC3MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC1DEC4MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC1INT1MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC1INT2MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC1INT3MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC1INT4MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC2DEC1MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC2DEC2MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC2DEC3MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC2DEC4MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC2INT1MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC2INT2MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC2INT3MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC2INT4MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC3DEC1MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC3DEC2MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC3DEC3MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC3DEC4MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC3INT1MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC3INT2MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC3INT3MIX_INPUT_1_SOURCE:
+	case ARIZONA_ISRC3INT4MIX_INPUT_1_SOURCE:
+	case ARIZONA_GPIO1_CTRL:
+	case ARIZONA_GPIO2_CTRL:
+	case ARIZONA_IRQ_CTRL_1:
+	case ARIZONA_GPIO_DEBOUNCE_CONFIG:
+	case ARIZONA_MISC_PAD_CTRL_1:
+	case ARIZONA_MISC_PAD_CTRL_2:
+	case ARIZONA_MISC_PAD_CTRL_3:
+	case ARIZONA_MISC_PAD_CTRL_4:
+	case ARIZONA_MISC_PAD_CTRL_5:
+	case ARIZONA_MISC_PAD_CTRL_6:
+	case ARIZONA_MISC_PAD_CTRL_7:
+	case ARIZONA_MISC_PAD_CTRL_9:
+	case ARIZONA_MISC_PAD_CTRL_10:
+	case ARIZONA_MISC_PAD_CTRL_11:
+	case ARIZONA_MISC_PAD_CTRL_12:
+	case ARIZONA_MISC_PAD_CTRL_13:
+	case ARIZONA_MISC_PAD_CTRL_14:
+	case ARIZONA_MISC_PAD_CTRL_16:
+	case ARIZONA_INTERRUPT_STATUS_1:
+	case ARIZONA_INTERRUPT_STATUS_2:
+	case ARIZONA_INTERRUPT_STATUS_3:
+	case ARIZONA_INTERRUPT_STATUS_4:
+	case ARIZONA_INTERRUPT_STATUS_5:
+	case ARIZONA_INTERRUPT_STATUS_6:
+	case ARIZONA_INTERRUPT_STATUS_1_MASK:
+	case ARIZONA_INTERRUPT_STATUS_2_MASK:
+	case ARIZONA_INTERRUPT_STATUS_3_MASK:
+	case ARIZONA_INTERRUPT_STATUS_4_MASK:
+	case ARIZONA_INTERRUPT_STATUS_5_MASK:
+	case ARIZONA_INTERRUPT_STATUS_6_MASK:
+	case ARIZONA_INTERRUPT_CONTROL:
+	case ARIZONA_IRQ2_STATUS_1:
+	case ARIZONA_IRQ2_STATUS_2:
+	case ARIZONA_IRQ2_STATUS_3:
+	case ARIZONA_IRQ2_STATUS_4:
+	case ARIZONA_IRQ2_STATUS_5:
+	case ARIZONA_IRQ2_STATUS_6:
+	case ARIZONA_IRQ2_STATUS_1_MASK:
+	case ARIZONA_IRQ2_STATUS_2_MASK:
+	case ARIZONA_IRQ2_STATUS_3_MASK:
+	case ARIZONA_IRQ2_STATUS_4_MASK:
+	case ARIZONA_IRQ2_STATUS_5_MASK:
+	case ARIZONA_IRQ2_STATUS_6_MASK:
+	case ARIZONA_IRQ2_CONTROL:
+	case ARIZONA_INTERRUPT_RAW_STATUS_2:
+	case ARIZONA_INTERRUPT_RAW_STATUS_3:
+	case ARIZONA_INTERRUPT_RAW_STATUS_4:
+	case ARIZONA_INTERRUPT_RAW_STATUS_5:
+	case ARIZONA_INTERRUPT_RAW_STATUS_6:
+	case ARIZONA_INTERRUPT_RAW_STATUS_7:
+	case ARIZONA_INTERRUPT_RAW_STATUS_8:
+	case ARIZONA_INTERRUPT_RAW_STATUS_9:
+	case ARIZONA_IRQ_PIN_STATUS:
+	case ARIZONA_FX_CTRL1:
+	case ARIZONA_FX_CTRL2:
+	case ARIZONA_EQ1_1:
+	case ARIZONA_EQ1_2:
+	case ARIZONA_EQ1_3:
+	case ARIZONA_EQ1_4:
+	case ARIZONA_EQ1_5:
+	case ARIZONA_EQ1_6:
+	case ARIZONA_EQ1_7:
+	case ARIZONA_EQ1_8:
+	case ARIZONA_EQ1_9:
+	case ARIZONA_EQ1_10:
+	case ARIZONA_EQ1_11:
+	case ARIZONA_EQ1_12:
+	case ARIZONA_EQ1_13:
+	case ARIZONA_EQ1_14:
+	case ARIZONA_EQ1_15:
+	case ARIZONA_EQ1_16:
+	case ARIZONA_EQ1_17:
+	case ARIZONA_EQ1_18:
+	case ARIZONA_EQ1_19:
+	case ARIZONA_EQ1_20:
+	case ARIZONA_EQ1_21:
+	case ARIZONA_EQ2_1:
+	case ARIZONA_EQ2_2:
+	case ARIZONA_EQ2_3:
+	case ARIZONA_EQ2_4:
+	case ARIZONA_EQ2_5:
+	case ARIZONA_EQ2_6:
+	case ARIZONA_EQ2_7:
+	case ARIZONA_EQ2_8:
+	case ARIZONA_EQ2_9:
+	case ARIZONA_EQ2_10:
+	case ARIZONA_EQ2_11:
+	case ARIZONA_EQ2_12:
+	case ARIZONA_EQ2_13:
+	case ARIZONA_EQ2_14:
+	case ARIZONA_EQ2_15:
+	case ARIZONA_EQ2_16:
+	case ARIZONA_EQ2_17:
+	case ARIZONA_EQ2_18:
+	case ARIZONA_EQ2_19:
+	case ARIZONA_EQ2_20:
+	case ARIZONA_EQ2_21:
+	case ARIZONA_DRC1_CTRL1:
+	case ARIZONA_DRC1_CTRL2:
+	case ARIZONA_DRC1_CTRL3:
+	case ARIZONA_DRC1_CTRL4:
+	case ARIZONA_DRC1_CTRL5:
+	case ARIZONA_DRC2_CTRL1:
+	case ARIZONA_DRC2_CTRL2:
+	case ARIZONA_DRC2_CTRL3:
+	case ARIZONA_DRC2_CTRL4:
+	case ARIZONA_DRC2_CTRL5:
+	case ARIZONA_HPLPF1_1:
+	case ARIZONA_HPLPF1_2:
+	case ARIZONA_HPLPF2_1:
+	case ARIZONA_HPLPF2_2:
+	case ARIZONA_HPLPF3_1:
+	case ARIZONA_HPLPF3_2:
+	case ARIZONA_HPLPF4_1:
+	case ARIZONA_HPLPF4_2:
+	case ARIZONA_ASRC_ENABLE:
+	case ARIZONA_ASRC_STATUS:
+	case ARIZONA_ASRC_RATE1:
+	case ARIZONA_ASRC_RATE2:
+	case ARIZONA_ISRC_1_CTRL_1:
+	case ARIZONA_ISRC_1_CTRL_2:
+	case ARIZONA_ISRC_1_CTRL_3:
+	case ARIZONA_ISRC_2_CTRL_1:
+	case ARIZONA_ISRC_2_CTRL_2:
+	case ARIZONA_ISRC_2_CTRL_3:
+	case ARIZONA_ISRC_3_CTRL_1:
+	case ARIZONA_ISRC_3_CTRL_2:
+	case ARIZONA_ISRC_3_CTRL_3:
+	case ARIZONA_DSP2_CONTROL_1:
+	case ARIZONA_DSP2_CLOCKING_1:
+	case ARIZONA_DSP2_STATUS_1:
+	case ARIZONA_DSP2_STATUS_2:
+	case ARIZONA_DSP2_STATUS_3:
+	case ARIZONA_DSP2_STATUS_4:
+	case ARIZONA_DSP2_WDMA_BUFFER_1:
+	case ARIZONA_DSP2_WDMA_BUFFER_2:
+	case ARIZONA_DSP2_WDMA_BUFFER_3:
+	case ARIZONA_DSP2_WDMA_BUFFER_4:
+	case ARIZONA_DSP2_WDMA_BUFFER_5:
+	case ARIZONA_DSP2_WDMA_BUFFER_6:
+	case ARIZONA_DSP2_WDMA_BUFFER_7:
+	case ARIZONA_DSP2_WDMA_BUFFER_8:
+	case ARIZONA_DSP2_RDMA_BUFFER_1:
+	case ARIZONA_DSP2_RDMA_BUFFER_2:
+	case ARIZONA_DSP2_RDMA_BUFFER_3:
+	case ARIZONA_DSP2_RDMA_BUFFER_4:
+	case ARIZONA_DSP2_RDMA_BUFFER_5:
+	case ARIZONA_DSP2_RDMA_BUFFER_6:
+	case ARIZONA_DSP2_WDMA_CONFIG_1:
+	case ARIZONA_DSP2_WDMA_CONFIG_2:
+	case ARIZONA_DSP2_WDMA_OFFSET_1:
+	case ARIZONA_DSP2_RDMA_CONFIG_1:
+	case ARIZONA_DSP2_RDMA_OFFSET_1:
+	case ARIZONA_DSP2_EXTERNAL_START_SELECT_1:
+	case ARIZONA_DSP2_SCRATCH_0:
+	case ARIZONA_DSP2_SCRATCH_1:
+	case ARIZONA_DSP2_SCRATCH_2:
+	case ARIZONA_DSP2_SCRATCH_3:
+	case ARIZONA_DSP3_CONTROL_1:
+	case ARIZONA_DSP3_CLOCKING_1:
+	case ARIZONA_DSP3_STATUS_1:
+	case ARIZONA_DSP3_STATUS_2:
+	case ARIZONA_DSP3_STATUS_3:
+	case ARIZONA_DSP3_STATUS_4:
+	case ARIZONA_DSP3_WDMA_BUFFER_1:
+	case ARIZONA_DSP3_WDMA_BUFFER_2:
+	case ARIZONA_DSP3_WDMA_BUFFER_3:
+	case ARIZONA_DSP3_WDMA_BUFFER_4:
+	case ARIZONA_DSP3_WDMA_BUFFER_5:
+	case ARIZONA_DSP3_WDMA_BUFFER_6:
+	case ARIZONA_DSP3_WDMA_BUFFER_7:
+	case ARIZONA_DSP3_WDMA_BUFFER_8:
+	case ARIZONA_DSP3_RDMA_BUFFER_1:
+	case ARIZONA_DSP3_RDMA_BUFFER_2:
+	case ARIZONA_DSP3_RDMA_BUFFER_3:
+	case ARIZONA_DSP3_RDMA_BUFFER_4:
+	case ARIZONA_DSP3_RDMA_BUFFER_5:
+	case ARIZONA_DSP3_RDMA_BUFFER_6:
+	case ARIZONA_DSP3_WDMA_CONFIG_1:
+	case ARIZONA_DSP3_WDMA_CONFIG_2:
+	case ARIZONA_DSP3_WDMA_OFFSET_1:
+	case ARIZONA_DSP3_RDMA_CONFIG_1:
+	case ARIZONA_DSP3_RDMA_OFFSET_1:
+	case ARIZONA_DSP3_EXTERNAL_START_SELECT_1:
+	case ARIZONA_DSP3_SCRATCH_0:
+	case ARIZONA_DSP3_SCRATCH_1:
+	case ARIZONA_DSP3_SCRATCH_2:
+	case ARIZONA_DSP3_SCRATCH_3:
+		return true;
+	default:
+		return cs47l24_is_adsp_memory(reg);
+	}
+}
+
+static bool cs47l24_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ARIZONA_SOFTWARE_RESET:
+	case ARIZONA_DEVICE_REVISION:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
+	case ARIZONA_HAPTICS_STATUS:
+	case ARIZONA_SAMPLE_RATE_1_STATUS:
+	case ARIZONA_SAMPLE_RATE_2_STATUS:
+	case ARIZONA_SAMPLE_RATE_3_STATUS:
+	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
+	case ARIZONA_HP_CTRL_1L:
+	case ARIZONA_HP_CTRL_1R:
+	case ARIZONA_INPUT_ENABLES_STATUS:
+	case ARIZONA_OUTPUT_STATUS_1:
+	case ARIZONA_RAW_OUTPUT_STATUS_1:
+	case ARIZONA_INTERRUPT_STATUS_1:
+	case ARIZONA_INTERRUPT_STATUS_2:
+	case ARIZONA_INTERRUPT_STATUS_3:
+	case ARIZONA_INTERRUPT_STATUS_4:
+	case ARIZONA_INTERRUPT_STATUS_5:
+	case ARIZONA_INTERRUPT_STATUS_6:
+	case ARIZONA_IRQ2_STATUS_1:
+	case ARIZONA_IRQ2_STATUS_2:
+	case ARIZONA_IRQ2_STATUS_3:
+	case ARIZONA_IRQ2_STATUS_4:
+	case ARIZONA_IRQ2_STATUS_5:
+	case ARIZONA_IRQ2_STATUS_6:
+	case ARIZONA_INTERRUPT_RAW_STATUS_2:
+	case ARIZONA_INTERRUPT_RAW_STATUS_3:
+	case ARIZONA_INTERRUPT_RAW_STATUS_4:
+	case ARIZONA_INTERRUPT_RAW_STATUS_5:
+	case ARIZONA_INTERRUPT_RAW_STATUS_6:
+	case ARIZONA_INTERRUPT_RAW_STATUS_7:
+	case ARIZONA_INTERRUPT_RAW_STATUS_8:
+	case ARIZONA_INTERRUPT_RAW_STATUS_9:
+	case ARIZONA_IRQ_PIN_STATUS:
+	case ARIZONA_FX_CTRL2:
+	case ARIZONA_ASRC_STATUS:
+	case ARIZONA_DSP2_STATUS_1:
+	case ARIZONA_DSP2_STATUS_2:
+	case ARIZONA_DSP2_STATUS_3:
+	case ARIZONA_DSP2_STATUS_4:
+	case ARIZONA_DSP2_WDMA_BUFFER_1:
+	case ARIZONA_DSP2_WDMA_BUFFER_2:
+	case ARIZONA_DSP2_WDMA_BUFFER_3:
+	case ARIZONA_DSP2_WDMA_BUFFER_4:
+	case ARIZONA_DSP2_WDMA_BUFFER_5:
+	case ARIZONA_DSP2_WDMA_BUFFER_6:
+	case ARIZONA_DSP2_WDMA_BUFFER_7:
+	case ARIZONA_DSP2_WDMA_BUFFER_8:
+	case ARIZONA_DSP2_RDMA_BUFFER_1:
+	case ARIZONA_DSP2_RDMA_BUFFER_2:
+	case ARIZONA_DSP2_RDMA_BUFFER_3:
+	case ARIZONA_DSP2_RDMA_BUFFER_4:
+	case ARIZONA_DSP2_RDMA_BUFFER_5:
+	case ARIZONA_DSP2_RDMA_BUFFER_6:
+	case ARIZONA_DSP2_WDMA_CONFIG_1:
+	case ARIZONA_DSP2_WDMA_CONFIG_2:
+	case ARIZONA_DSP2_WDMA_OFFSET_1:
+	case ARIZONA_DSP2_RDMA_CONFIG_1:
+	case ARIZONA_DSP2_RDMA_OFFSET_1:
+	case ARIZONA_DSP2_EXTERNAL_START_SELECT_1:
+	case ARIZONA_DSP2_SCRATCH_0:
+	case ARIZONA_DSP2_SCRATCH_1:
+	case ARIZONA_DSP2_SCRATCH_2:
+	case ARIZONA_DSP2_SCRATCH_3:
+	case ARIZONA_DSP2_CLOCKING_1:
+	case ARIZONA_DSP3_STATUS_1:
+	case ARIZONA_DSP3_STATUS_2:
+	case ARIZONA_DSP3_STATUS_3:
+	case ARIZONA_DSP3_STATUS_4:
+	case ARIZONA_DSP3_WDMA_BUFFER_1:
+	case ARIZONA_DSP3_WDMA_BUFFER_2:
+	case ARIZONA_DSP3_WDMA_BUFFER_3:
+	case ARIZONA_DSP3_WDMA_BUFFER_4:
+	case ARIZONA_DSP3_WDMA_BUFFER_5:
+	case ARIZONA_DSP3_WDMA_BUFFER_6:
+	case ARIZONA_DSP3_WDMA_BUFFER_7:
+	case ARIZONA_DSP3_WDMA_BUFFER_8:
+	case ARIZONA_DSP3_RDMA_BUFFER_1:
+	case ARIZONA_DSP3_RDMA_BUFFER_2:
+	case ARIZONA_DSP3_RDMA_BUFFER_3:
+	case ARIZONA_DSP3_RDMA_BUFFER_4:
+	case ARIZONA_DSP3_RDMA_BUFFER_5:
+	case ARIZONA_DSP3_RDMA_BUFFER_6:
+	case ARIZONA_DSP3_WDMA_CONFIG_1:
+	case ARIZONA_DSP3_WDMA_CONFIG_2:
+	case ARIZONA_DSP3_WDMA_OFFSET_1:
+	case ARIZONA_DSP3_RDMA_CONFIG_1:
+	case ARIZONA_DSP3_RDMA_OFFSET_1:
+	case ARIZONA_DSP3_EXTERNAL_START_SELECT_1:
+	case ARIZONA_DSP3_SCRATCH_0:
+	case ARIZONA_DSP3_SCRATCH_1:
+	case ARIZONA_DSP3_SCRATCH_2:
+	case ARIZONA_DSP3_SCRATCH_3:
+	case ARIZONA_DSP3_CLOCKING_1:
+		return true;
+	default:
+		return cs47l24_is_adsp_memory(reg);
+	}
+}
+
+#define CS47L24_MAX_REGISTER 0x3b3fff
+
+const struct regmap_config cs47l24_spi_regmap = {
+	.reg_bits = 32,
+	.pad_bits = 16,
+	.val_bits = 16,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+
+	.max_register = CS47L24_MAX_REGISTER,
+	.readable_reg = cs47l24_readable_register,
+	.volatile_reg = cs47l24_volatile_register,
+
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = cs47l24_reg_default,
+	.num_reg_defaults = ARRAY_SIZE(cs47l24_reg_default),
+};
+EXPORT_SYMBOL_GPL(cs47l24_spi_regmap);
+
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index 79e607e..d55a422 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -27,6 +27,8 @@ enum arizona_type {
 	WM8280 = 4,
 	WM8998 = 5,
 	WM1814 = 6,
+	WM1831 = 7,
+	CS47L24 = 8,
 };
 
 #define ARIZONA_IRQ_GP1                    0
@@ -166,6 +168,7 @@ static inline int wm5102_patch(struct arizona *arizona)
 #endif
 
 int wm5110_patch(struct arizona *arizona);
+int cs47l24_patch(struct arizona *arizona);
 int wm8997_patch(struct arizona *arizona);
 int wm8998_patch(struct arizona *arizona);
 
-- 
cgit v0.10.2


From 12ebc1370766e85253f0db4b21e77d5ffca4abed Mon Sep 17 00:00:00 2001
From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Date: Tue, 3 Nov 2015 15:08:36 +0000
Subject: MAINTAINERS: Update Wolfson Micro section to include CS47L24 source

The CS47L24 source is part of the ex-Wolfson "Arizona" group of
drivers. Not all cs47lxx devices are part of the Arizona driver
group so the cs47l24 is explicitly listed by its full part number.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/MAINTAINERS b/MAINTAINERS
index 050d0e7..25b7275 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11671,6 +11671,7 @@ F:	drivers/input/touchscreen/wm831x-ts.c
 F:	drivers/input/touchscreen/wm97*.c
 F:	drivers/mfd/arizona*
 F:	drivers/mfd/wm*.c
+F:	drivers/mfd/cs47l24*
 F:	drivers/power/wm83*.c
 F:	drivers/rtc/rtc-wm83*.c
 F:	drivers/regulator/wm8*.c
@@ -11684,6 +11685,7 @@ F:	include/linux/wm97xx.h
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/arizona.?
 F:	sound/soc/codecs/wm*
+F:	sound/soc/codecs/cs47l24*
 
 WORKQUEUE
 M:	Tejun Heo <tj@kernel.org>
-- 
cgit v0.10.2


From 6d6e44a953161e4ce60d1fe805d165d8290ce9e8 Mon Sep 17 00:00:00 2001
From: Nicolas Boichat <drinkcat@chromium.org>
Date: Wed, 25 Nov 2015 13:51:07 +0800
Subject: mfd: cros ec: Lock the SPI bus while holding chipselect

cros_ec_cmd_xfer_spi and cros_ec_pkt_xfer_spi generally work like
this:
 - Pull CS down (active), wait a bit, then send a command
 - Wait for response (multiple requests)
 - Wait a while, pull CS up (inactive)

These operations, individually, lock the SPI bus, but there is
nothing preventing the SPI framework from interleaving messages
intended for other devices as the bus is unlocked in between.

This is a problem as the EC expects CS to be held low for the
whole duration.

Solution: Lock the SPI bus during the whole transaction, to make
sure that no other messages can be interleaved.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 6a0f6ec..d6af52d 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -113,7 +113,7 @@ static int terminate_request(struct cros_ec_device *ec_dev)
 	trans.delay_usecs = ec_spi->end_of_msg_delay;
 	spi_message_add_tail(&trans, &msg);
 
-	ret = spi_sync(ec_spi->spi, &msg);
+	ret = spi_sync_locked(ec_spi->spi, &msg);
 
 	/* Reset end-of-response timer */
 	ec_spi->last_transfer_ns = ktime_get_ns();
@@ -147,7 +147,7 @@ static int receive_n_bytes(struct cros_ec_device *ec_dev, u8 *buf, int n)
 
 	spi_message_init(&msg);
 	spi_message_add_tail(&trans, &msg);
-	ret = spi_sync(ec_spi->spi, &msg);
+	ret = spi_sync_locked(ec_spi->spi, &msg);
 	if (ret < 0)
 		dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
 
@@ -391,10 +391,10 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	}
 
 	rx_buf = kzalloc(len, GFP_KERNEL);
-	if (!rx_buf) {
-		ret = -ENOMEM;
-		goto exit;
-	}
+	if (!rx_buf)
+		return -ENOMEM;
+
+	spi_bus_lock(ec_spi->spi->master);
 
 	/*
 	 * Leave a gap between CS assertion and clocking of data to allow the
@@ -414,7 +414,7 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	trans.len = len;
 	trans.cs_change = 1;
 	spi_message_add_tail(&trans, &msg);
-	ret = spi_sync(ec_spi->spi, &msg);
+	ret = spi_sync_locked(ec_spi->spi, &msg);
 
 	/* Get the response */
 	if (!ret) {
@@ -440,6 +440,9 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	}
 
 	final_ret = terminate_request(ec_dev);
+
+	spi_bus_unlock(ec_spi->spi->master);
+
 	if (!ret)
 		ret = final_ret;
 	if (ret < 0)
@@ -520,10 +523,10 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	}
 
 	rx_buf = kzalloc(len, GFP_KERNEL);
-	if (!rx_buf) {
-		ret = -ENOMEM;
-		goto exit;
-	}
+	if (!rx_buf)
+		return -ENOMEM;
+
+	spi_bus_lock(ec_spi->spi->master);
 
 	/* Transmit phase - send our message */
 	debug_packet(ec_dev->dev, "out", ec_dev->dout, len);
@@ -534,7 +537,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	trans.cs_change = 1;
 	spi_message_init(&msg);
 	spi_message_add_tail(&trans, &msg);
-	ret = spi_sync(ec_spi->spi, &msg);
+	ret = spi_sync_locked(ec_spi->spi, &msg);
 
 	/* Get the response */
 	if (!ret) {
@@ -560,6 +563,9 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	}
 
 	final_ret = terminate_request(ec_dev);
+
+	spi_bus_unlock(ec_spi->spi->master);
+
 	if (!ret)
 		ret = final_ret;
 	if (ret < 0)
-- 
cgit v0.10.2


From 32e9725d9a87549eb8b2a6455de0bce9dc8385de Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Thu, 26 Nov 2015 17:40:17 +0000
Subject: mfd: wm5110: Correct defaults for micbias control registers

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 2bb2d04..c18e11f 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -762,9 +762,9 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000200, 0x0006 },    /* R512   - Mic Charge Pump 1 */
 	{ 0x00000210, 0x0184 },    /* R528   - LDO1 Control 1 */
 	{ 0x00000213, 0x03E4 },    /* R531   - LDO2 Control 1 */
-	{ 0x00000218, 0x01A6 },    /* R536   - Mic Bias Ctrl 1 */
-	{ 0x00000219, 0x01A6 },    /* R537   - Mic Bias Ctrl 2 */
-	{ 0x0000021A, 0x01A6 },    /* R538   - Mic Bias Ctrl 3 */
+	{ 0x00000218, 0x00E6 },    /* R536   - Mic Bias Ctrl 1 */
+	{ 0x00000219, 0x00E6 },    /* R537   - Mic Bias Ctrl 2 */
+	{ 0x0000021A, 0x00E6 },    /* R538   - Mic Bias Ctrl 3 */
 	{ 0x00000293, 0x0000 },    /* R659   - Accessory Detect Mode 1 */
 	{ 0x0000029B, 0x0028 },    /* R667   - Headphone Detect 1 */
 	{ 0x000002A2, 0x0000 },    /* R674   - Micd clamp control */
-- 
cgit v0.10.2


From db2fb60cd35d2d03699e570906ced73b4c05586e Mon Sep 17 00:00:00 2001
From: Damien Riegel <damien.riegel@savoirfairelinux.com>
Date: Mon, 30 Nov 2015 10:59:47 -0500
Subject: mfd: syscon: Add a DT property to set value width

Currently syscon has a fixed configuration of 32 bits for register and
values widths. In some cases, it would be desirable to be able to
customize the value width.

For example, certain boards (like the ones manufactured by Technologic
Systems) have a FPGA that is memory-mapped, but its registers are only
16-bit wide.

This patch adds an optional "reg-io-width" DT binding for syscon that
allows to change the width for the data bus (i.e. val_bits). If this
property is provided, it will also set the register stride to
reg-io-width's value. If not provided, the default configuration is
used.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
index fe8150b..408f768 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.txt
+++ b/Documentation/devicetree/bindings/mfd/syscon.txt
@@ -13,6 +13,10 @@ Required properties:
 - compatible: Should contain "syscon".
 - reg: the register region can be accessed from syscon
 
+Optional property:
+- reg-io-width: the size (in bytes) of the IO accesses that should be
+  performed on the device.
+
 Examples:
 gpr: iomuxc-gpr@020e0000 {
 	compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 176bf0f..b7aabee 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np)
 	struct syscon *syscon;
 	struct regmap *regmap;
 	void __iomem *base;
+	u32 reg_io_width;
 	int ret;
 	struct regmap_config syscon_config = syscon_regmap_config;
 
@@ -69,6 +70,18 @@ static struct syscon *of_syscon_register(struct device_node *np)
 	 else if (of_property_read_bool(np, "little-endian"))
 		syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
 
+	/*
+	 * search for reg-io-width property in DT. If it is not provided,
+	 * default to 4 bytes. regmap_init_mmio will return an error if values
+	 * are invalid so there is no need to check them here.
+	 */
+	ret = of_property_read_u32(np, "reg-io-width", &reg_io_width);
+	if (ret)
+		reg_io_width = 4;
+
+	syscon_config.reg_stride = reg_io_width;
+	syscon_config.val_bits = reg_io_width * 8;
+
 	regmap = regmap_init_mmio(NULL, base, &syscon_config);
 	if (IS_ERR(regmap)) {
 		pr_err("regmap init failed\n");
-- 
cgit v0.10.2


From a5656a708050bd3be5c3a3bc45297db21e88cecd Mon Sep 17 00:00:00 2001
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Date: Sun, 6 Dec 2015 00:39:39 +0100
Subject: mfd: wm831x: Fix broken wm831x_unique_id_show

wm831x_unique_id_show currently displays an interesting pattern of '0'
and '3' characters which isn't very useful (figuring out why is left
as an exercise for the reader). Presumably "buf[i]" should have been
"id[i] & 0xff".

But while there, it is much simpler to simply use %phN and do all the
formatting at once.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c
index b90f3e0..ebac002 100644
--- a/drivers/mfd/wm831x-otp.c
+++ b/drivers/mfd/wm831x-otp.c
@@ -47,20 +47,14 @@ static ssize_t wm831x_unique_id_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
 	struct wm831x *wm831x = dev_get_drvdata(dev);
-	int i, rval;
+	int rval;
 	char id[WM831X_UNIQUE_ID_LEN];
-	ssize_t ret = 0;
 
 	rval = wm831x_unique_id_read(wm831x, id);
 	if (rval < 0)
 		return 0;
 
-	for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++)
-		ret += sprintf(&buf[ret], "%02x", buf[i]);
-
-	ret += sprintf(&buf[ret], "\n");
-
-	return ret;
+	return sprintf(buf, "%*phN\n", WM831X_UNIQUE_ID_LEN, id);
 }
 
 static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL);
-- 
cgit v0.10.2


From 742dcd115cb523f4b518bfcda870e10a027a8024 Mon Sep 17 00:00:00 2001
From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>
Date: Tue, 17 Nov 2015 16:06:44 -0800
Subject: mfd: qcom-spmi-pmic: Don't access non-existing registers

Revision ID registers are available only on devices with
Slave IDs that are even, so don't make access to unavailable
registers.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
[sboyd@codeaurora.org: Consider all slave ids that are even]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c
index af6ac1c..8653e8b 100644
--- a/drivers/mfd/qcom-spmi-pmic.c
+++ b/drivers/mfd/qcom-spmi-pmic.c
@@ -127,7 +127,9 @@ static int pmic_spmi_probe(struct spmi_device *sdev)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	pmic_spmi_show_revid(regmap, &sdev->dev);
+	/* Only the first slave id for a PMIC contains this information */
+	if (sdev->usid % 2 == 0)
+		pmic_spmi_show_revid(regmap, &sdev->dev);
 
 	return of_platform_populate(root, NULL, NULL, &sdev->dev);
 }
-- 
cgit v0.10.2


From d91d76d84c3adf7ca04ef1932431d49f51edee5e Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Wed, 2 Dec 2015 17:28:11 +0100
Subject: mfd: sta2x11: Use platform_register/unregister_drivers()

These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c
index b3e5c6f..9292202 100644
--- a/drivers/mfd/sta2x11-mfd.c
+++ b/drivers/mfd/sta2x11-mfd.c
@@ -372,12 +372,6 @@ static struct platform_driver sta2x11_sctl_platform_driver = {
 	.probe		= sta2x11_sctl_probe,
 };
 
-static int __init sta2x11_sctl_init(void)
-{
-	pr_info("%s\n", __func__);
-	return platform_driver_register(&sta2x11_sctl_platform_driver);
-}
-
 static struct platform_driver sta2x11_platform_driver = {
 	.driver = {
 		.name	= STA2X11_MFD_APBREG_NAME,
@@ -385,12 +379,6 @@ static struct platform_driver sta2x11_platform_driver = {
 	.probe		= sta2x11_apbreg_probe,
 };
 
-static int __init sta2x11_apbreg_init(void)
-{
-	pr_info("%s\n", __func__);
-	return platform_driver_register(&sta2x11_platform_driver);
-}
-
 static struct platform_driver sta2x11_apb_soc_regs_platform_driver = {
 	.driver = {
 		.name	= STA2X11_MFD_APB_SOC_REGS_NAME,
@@ -398,12 +386,6 @@ static struct platform_driver sta2x11_apb_soc_regs_platform_driver = {
 	.probe		= sta2x11_apb_soc_regs_probe,
 };
 
-static int __init sta2x11_apb_soc_regs_init(void)
-{
-	pr_info("%s\n", __func__);
-	return platform_driver_register(&sta2x11_apb_soc_regs_platform_driver);
-}
-
 static struct platform_driver sta2x11_scr_platform_driver = {
 	.driver = {
 		.name = STA2X11_MFD_SCR_NAME,
@@ -411,13 +393,18 @@ static struct platform_driver sta2x11_scr_platform_driver = {
 	.probe = sta2x11_scr_probe,
 };
 
-static int __init sta2x11_scr_init(void)
+static struct platform_driver * const drivers[] = {
+	&sta2x11_platform_driver,
+	&sta2x11_sctl_platform_driver,
+	&sta2x11_apb_soc_regs_platform_driver,
+	&sta2x11_scr_platform_driver,
+};
+
+static int __init sta2x11_drivers_init(void)
 {
-	pr_info("%s\n", __func__);
-	return platform_driver_register(&sta2x11_scr_platform_driver);
+	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
 }
 
-
 /*
  * What follows are the PCI devices that host the above pdevs.
  * Each logic block is 4kB and they are all consecutive: we use this info.
@@ -664,10 +651,7 @@ static int __init sta2x11_mfd_init(void)
  * prepares platform drivers very early and probe the PCI device later,
  * but before other PCI devices.
  */
-subsys_initcall(sta2x11_apbreg_init);
-subsys_initcall(sta2x11_sctl_init);
-subsys_initcall(sta2x11_apb_soc_regs_init);
-subsys_initcall(sta2x11_scr_init);
+subsys_initcall(sta2x11_drivers_init);
 rootfs_initcall(sta2x11_mfd_init);
 
 MODULE_LICENSE("GPL v2");
-- 
cgit v0.10.2


From a7b956fd38dd217dd78e3058110929f5ac914df1 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 8 Dec 2015 16:21:05 +0100
Subject: mfd: as3722: Mark PM functions as __maybe_unused

The newly introduced as3722_i2c_suspend/resume functions are built
unconditionally, but only used when power management is enabled,
so we get a warning otherwise:

drivers/mfd/as3722.c:427:12: warning: 'as3722_i2c_suspend' defined but not used [-Wunused-function]
drivers/mfd/as3722.c:438:12: warning: 'as3722_i2c_resume' defined but not used [-Wunused-function]

This marks them both as __maybe_unused, which avoids an ugly #ifdef
and gives us best compile-time coverage. When they are unused, the
compiler will silently drop the functions from its output.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 35deff7eb212 ("mfd: as3722: Handle interrupts on suspend")
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c
index 3b21eb4..e1f597f 100644
--- a/drivers/mfd/as3722.c
+++ b/drivers/mfd/as3722.c
@@ -424,7 +424,7 @@ static int as3722_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
-static int as3722_i2c_suspend(struct device *dev)
+static int __maybe_unused as3722_i2c_suspend(struct device *dev)
 {
 	struct as3722 *as3722 = dev_get_drvdata(dev);
 
@@ -435,7 +435,7 @@ static int as3722_i2c_suspend(struct device *dev)
 	return 0;
 }
 
-static int as3722_i2c_resume(struct device *dev)
+static int __maybe_unused as3722_i2c_resume(struct device *dev)
 {
 	struct as3722 *as3722 = dev_get_drvdata(dev);
 
-- 
cgit v0.10.2


From 7d07d15abb606f6e0c611e9bc9a2de4745456e5f Mon Sep 17 00:00:00 2001
From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Date: Tue, 3 Nov 2015 15:08:34 +0000
Subject: gpio: arizona: Support Cirrus Logic CS47L24 and WM1831

The CS47L24 and WM1831 codecs only have two GPIO lines, but are
otherwise similar to the WM8280.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index ca00273..624ea54 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -122,6 +122,10 @@ static int arizona_gpio_probe(struct platform_device *pdev)
 	case WM1814:
 		arizona_gpio->gpio_chip.ngpio = 5;
 		break;
+	case WM1831:
+	case CS47L24:
+		arizona_gpio->gpio_chip.ngpio = 2;
+		break;
 	default:
 		dev_err(&pdev->dev, "Unknown chip variant %d\n",
 			arizona->type);
-- 
cgit v0.10.2


From 6c006b1b17f8841d83f09b2bc34227e2f9428872 Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Wed, 16 Dec 2015 13:53:59 +0000
Subject: mfd: arizona: Request parent IRQ before we request child IRQs

Currently the driver requests the boot done and control interface IRQs
before it has requested its own IRQ line. This can cause problems on
edge triggered IRQ systems as if an edge occurs before the parent IRQ is
enabled it will be missed. Whilst we are changing the error handling
remove an unused label as well.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 682bc86..5fef014 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -310,7 +310,7 @@ int arizona_irq_init(struct arizona *arizona)
 		if (ret != 0) {
 			dev_err(arizona->dev,
 				"Failed to add AOD IRQs: %d\n", ret);
-			goto err_domain;
+			goto err;
 		}
 	}
 
@@ -323,30 +323,6 @@ int arizona_irq_init(struct arizona *arizona)
 		goto err_aod;
 	}
 
-	/* Make sure the boot done IRQ is unmasked for resumes */
-	i = arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE);
-	ret = request_threaded_irq(i, NULL, arizona_boot_done, IRQF_ONESHOT,
-				   "Boot done", arizona);
-	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to request boot done %d: %d\n",
-			arizona->irq, ret);
-		goto err_boot_done;
-	}
-
-	/* Handle control interface errors in the core */
-	if (arizona->ctrlif_error) {
-		i = arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR);
-		ret = request_threaded_irq(i, NULL, arizona_ctrlif_err,
-					   IRQF_ONESHOT,
-					   "Control interface error", arizona);
-		if (ret != 0) {
-			dev_err(arizona->dev,
-				"Failed to request CTRLIF_ERR %d: %d\n",
-				arizona->irq, ret);
-			goto err_ctrlif;
-		}
-	}
-
 	/* Used to emulate edge trigger and to work around broken pinmux */
 	if (arizona->pdata.irq_gpio) {
 		if (gpio_to_irq(arizona->pdata.irq_gpio) != arizona->irq) {
@@ -376,21 +352,42 @@ int arizona_irq_init(struct arizona *arizona)
 		goto err_main_irq;
 	}
 
+	/* Make sure the boot done IRQ is unmasked for resumes */
+	i = arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE);
+	ret = request_threaded_irq(i, NULL, arizona_boot_done, IRQF_ONESHOT,
+				   "Boot done", arizona);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to request boot done %d: %d\n",
+			arizona->irq, ret);
+		goto err_boot_done;
+	}
+
+	/* Handle control interface errors in the core */
+	if (arizona->ctrlif_error) {
+		i = arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR);
+		ret = request_threaded_irq(i, NULL, arizona_ctrlif_err,
+					   IRQF_ONESHOT,
+					   "Control interface error", arizona);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to request CTRLIF_ERR %d: %d\n",
+				arizona->irq, ret);
+			goto err_ctrlif;
+		}
+	}
+
 	return 0;
 
-err_main_irq:
-	if (arizona->ctrlif_error)
-		free_irq(arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR),
-			 arizona);
 err_ctrlif:
 	free_irq(arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE), arizona);
 err_boot_done:
+	free_irq(arizona->irq, arizona);
+err_main_irq:
 	regmap_del_irq_chip(irq_create_mapping(arizona->virq, 1),
 			    arizona->irq_chip);
 err_aod:
 	regmap_del_irq_chip(irq_create_mapping(arizona->virq, 0),
 			    arizona->aod_irq_chip);
-err_domain:
 err:
 	return ret;
 }
-- 
cgit v0.10.2


From 8726cacc7f38e7e122e6910fb0b979dcd1ca89d3 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon, 7 Dec 2015 17:16:43 +0100
Subject: mfd: da9063: Allow modular build

Allow support for the DA9063 PMIC to be modular, cfr. DA9062, which
allows to decrease size of multi-platform kernels (e.g.
multi_v7_defconfig).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9581ebb..9ca66de 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -211,7 +211,7 @@ config MFD_DA9062
 	  of the device.
 
 config MFD_DA9063
-	bool "Dialog Semiconductor DA9063 PMIC Support"
+	tristate "Dialog Semiconductor DA9063 PMIC Support"
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-- 
cgit v0.10.2


From f199d39349beabcb1a374cb02e0845a0ae84f3fd Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Mon, 14 Dec 2015 10:19:11 +0000
Subject: mfd: arizona: Add device tree binding to specify mono outputs

Add device tree bindings to support specifying outputs from the chip as
mono outputs. Whilst we are doing it change the out_mono pdata from a
bool to an int, because Sparse gets upset about using ARRAY_SIZE on
bools.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index b9489a0..4bb4866 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -861,6 +861,16 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
 		count++;
 	}
 
+	count = 0;
+	of_property_for_each_u32(arizona->dev->of_node, "wlf,out-mono", prop,
+				 cur, val) {
+		if (count == ARRAY_SIZE(pdata->out_mono))
+			break;
+
+		pdata->out_mono[count] = !!val;
+		count++;
+	}
+
 	return 0;
 }
 
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 57b45ca..64faeef 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -171,7 +171,7 @@ struct arizona_pdata {
 	int inmode[ARIZONA_MAX_INPUT];
 
 	/** Mode for outputs */
-	bool out_mono[ARIZONA_MAX_OUTPUT];
+	int out_mono[ARIZONA_MAX_OUTPUT];
 
 	/** PDM speaker mute setting */
 	unsigned int spk_mute[ARIZONA_MAX_PDM_SPK];
-- 
cgit v0.10.2


From a5dca7dc7e80f0cb4dcc9251983fb51745541f48 Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Mon, 14 Dec 2015 10:19:12 +0000
Subject: mfd: arizona: Update binding docs for selecting mono/stereo outputs

Update the device tree binding documentation to include the wlf,out-mono
property that is used to specify whether each output is a mono or stereo
output.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 2b6ccdb..069e31d 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -65,6 +65,12 @@ Optional properties:
     that have not been specified are set to 0 by default. Entries are:
     <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
     <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+  - wlf,out-mono : A list of boolean values indicating whether each output is
+    mono or stereo. Position within the list indicates the output affected
+    (eg. First entry in the list corresponds to output 1). A non-zero value
+    indicates a mono output. If present, the number of values should be less
+    than or equal to the number of outputs, if less values are supplied the
+    additional outputs will be treated as stereo.
 
   - wlf,dmic-ref : DMIC reference voltage source for each input, can be
     selected from either MICVDD or one of the MICBIAS's, defines
-- 
cgit v0.10.2


From 0c7f3f92ffe8dc4e631b2f20c06543ec9f521f7c Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 22 Dec 2015 15:48:33 +0100
Subject: mfd: ucb1x00-core: Be sure to clamp return value

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index f691d7e..e0dd83f 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -133,7 +133,7 @@ static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
 	val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
 	ucb1x00_disable(ucb);
 
-	return val & (1 << offset);
+	return !!(val & (1 << offset));
 }
 
 static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-- 
cgit v0.10.2


From bf3de47f1af3dab8fb8c3a3bd21ada7de614b7de Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 22 Dec 2015 15:48:13 +0100
Subject: mfd: tps65010: Be sure to clamp return value

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

This also start to propagate the negative error code from the
smbus call if there is one, as the last commit of this series
will make the gpiolib core deal with that properly.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index 448f0a1..677a127 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -499,11 +499,11 @@ static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
 	if (offset < 4) {
 		value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
 		if (value < 0)
-			return 0;
+			return value;
 		if (value & (1 << (offset + 4)))	/* output */
 			return !(value & (1 << offset));
 		else					/* input */
-			return (value & (1 << offset));
+			return !!(value & (1 << offset));
 	}
 
 	/* REVISIT we *could* report LED1/nPG and LED2 state ... */
-- 
cgit v0.10.2


From 2d5f72b85a8876088be77cee3a7bdee4c0259085 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 22 Dec 2015 15:47:55 +0100
Subject: mfd: tc6393xb: Be sure to clamp return value

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 8c84a51..1ecbfa4 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -437,8 +437,8 @@ static int tc6393xb_gpio_get(struct gpio_chip *chip,
 	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
 
 	/* XXX: does dsr also represent inputs? */
-	return tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
-		& TC_GPIO_BIT(offset);
+	return !!(tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
+		  & TC_GPIO_BIT(offset));
 }
 
 static void __tc6393xb_gpio_set(struct gpio_chip *chip,
-- 
cgit v0.10.2


From f7d623669648d2a8d7e81671294c26e480ddcc79 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 22 Dec 2015 15:47:39 +0100
Subject: mfd: htc-egpio: Be sure to clamp return value

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c
index 6ccaf90..e4f4a31 100644
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
@@ -163,7 +163,7 @@ static int egpio_get(struct gpio_chip *chip, unsigned offset)
 	value = egpio_readw(ei, reg);
 	pr_debug("readw(%p + %x) = %x\n",
 			ei->base_addr, reg << ei->bus_shift, value);
-	return value & bit;
+	return !!(value & bit);
 }
 
 static int egpio_direction_input(struct gpio_chip *chip, unsigned offset)
-- 
cgit v0.10.2


From fe0b486729e1ae837cf0afd1005d3c10a78f9807 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 22 Dec 2015 15:47:31 +0100
Subject: mfd: dm355evm_mps: Be sure to clamp return value

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 4c826f7..bf3e0b2 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -147,7 +147,7 @@ static int msp_gpio_get(struct gpio_chip *chip, unsigned offset)
 		return status;
 	if (reg == DM355EVM_MSP_LED)
 		msp_led_cache = status;
-	return status & MSP_GPIO_MASK(offset);
+	return !!(status & MSP_GPIO_MASK(offset));
 }
 
 static int msp_gpio_out(struct gpio_chip *chip, unsigned offset, int value)
-- 
cgit v0.10.2


From f8e3a514bf98a94255bd1534a21aebaf795b7a13 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 22 Dec 2015 15:47:05 +0100
Subject: mfd: asic3: Be sure to clamp return value

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Cc: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index a726f01..73812ee 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -502,7 +502,8 @@ static int asic3_gpio_get(struct gpio_chip *chip,
 		return -EINVAL;
 	}
 
-	return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask;
+	return !!(asic3_read_register(asic,
+				      gpio_base + ASIC3_GPIO_STATUS) & mask);
 }
 
 static void asic3_gpio_set(struct gpio_chip *chip,
-- 
cgit v0.10.2


From a13c7c51fd91deb7a8a8535ff14fed283f1a2187 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Fri, 4 Dec 2015 10:10:03 +0900
Subject: dt-bindings: regulator/clock/mfd: Reorganize S2MPS-family bindings

Bindings for Samsung S2M and S5M family PMICs are in mess. They are
spread over different files and subdirectories in a non-consistent way.
The devices and respective drivers for them share a lot in common so
everything could be organized in a more readable way.

Reorganize the S2MPS11/13/14/15 Device Tree bindings to match the
drivers for this family of devices:
 - move mfd/s2mps11.txt to mfd/samsung,sec-core.txt for the main MFD
   driver (common for entire family),
 - split clock block to clock/samsung,s2mps11.txt,
 - split regulator block to regulator/samsung,s2mps11.txt.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
new file mode 100644
index 0000000..2726c1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
@@ -0,0 +1,49 @@
+Binding for Samsung S2M and S5M family clock generator block
+============================================================
+
+This is a part of device tree bindings for S2M and S5M family multi-function
+devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+To register these as clocks with common clock framework instantiate under
+main device node a sub-node named "clocks".
+
+It uses the common clock binding documented in:
+ - Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Required properties of the "clocks" sub-node:
+ - #clock-cells: should be 1.
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+               "samsung,s2mps14-clk", "samsung,s5m8767-clk"
+   The S2MPS15 uses the same compatible as S2MPS13, as both provides similar
+   clocks.
+
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+    Clock               ID           Devices
+    ----------------------------------------------------------
+    32KhzAP		0            S2MPS11/13/14/15, S5M8767
+    32KhzCP		1            S2MPS11/13/15, S5M8767
+    32KhzBT		2            S2MPS11/13/14/15, S5M8767
+
+Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines
+in device tree sources.
+
+
+Example:
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		s2m_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "xx", "yy", "zz";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
deleted file mode 100644
index 09b94c9..0000000
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ /dev/null
@@ -1,153 +0,0 @@
-
-* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator
-
-The Samsung S2MPS11 is a multi-function device which includes voltage and
-current regulators, RTC, charger controller and other sub-blocks. It is
-interfaced to the host controller using an I2C interface. Each sub-block is
-addressed by the host system using different I2C slave addresses.
-
-Required properties:
-- compatible: Should be one of the following
-	- "samsung,s2mps11-pmic"
-	- "samsung,s2mps13-pmic"
-	- "samsung,s2mps14-pmic"
-	- "samsung,s2mps15-pmic"
-	- "samsung,s2mpu02-pmic".
-- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
-
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
-  the interrupts from s2mps11 are delivered to.
-- interrupts: Interrupt specifiers for interrupt sources.
-- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
-  down. When the system is suspended it will always go down thus triggerring
-  unwanted buck warm reset (setting buck voltages to default values).
-- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
-  connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
-  register to turn off the power. Usually the ACOKB is pulled up to VBATT so
-  when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
-
-Optional nodes:
-- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768
-  KHz outputs, so to register these as clocks with common clock framework
-  instantiate a sub-node named "clocks". It uses the common clock binding
-  documented in :
-  [Documentation/devicetree/bindings/clock/clock-bindings.txt]
-  The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
-  - #clock-cells: should be 1.
-
-  - The following is the list of clocks generated by the controller. Each clock
-    is assigned an identifier and client nodes use this identifier to specify
-    the clock which they consume.
-    Clock               ID           Devices
-    ----------------------------------------------------------
-    32KhzAP		0            S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
-    32KhzCP		1            S2MPS11, S2MPS13, S2MPS15, S5M8767
-    32KhzBT		2            S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
-
-  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
-		"samsung,s2mps14-clk", "samsung,s5m8767-clk"
-    The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks.
-
-- regulators: The regulators of s2mps11 that have to be instantiated should be
-included in a sub-node named 'regulators'. Regulator nodes included in this
-sub-node should be of the format as listed below.
-
-	regulator_name {
-		[standard regulator constraints....];
-	};
-
- regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
-
- BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly
- regulator-ramp-delay = <0> can be used for them to disable ramp delay.
- In the absence of the regulator-ramp-delay property, the default ramp
- delay will be used.
-
-NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
-for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
-Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6],
-BUCK[3, 4], and BUCK[7, 8, 10]
-
-On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control
-over GPIO. To turn this feature on this property must be added to the regulator
-sub-node:
-	- samsung,ext-control-gpios: GPIO specifier for one GPIO
-		controlling this regulator (enable/disable);
-Example:
-	LDO12 {
-		regulator-name = "V_EMMC_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		samsung,ext-control-gpios = <&gpk0 2 0>;
-	};
-
-
-The regulator constraints inside the regulator nodes use the standard regulator
-bindings which are documented elsewhere.
-
-The following are the names of the regulators that the s2mps11 pmic block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s2mps11.
-
-	- LDOn
-		  - valid values for n are:
-			- S2MPS11: 1 to 38
-			- S2MPS13: 1 to 40
-			- S2MPS14: 1 to 25
-			- S2MPS15: 1 to 27
-			- S2MPU02: 1 to 28
-		  - Example: LDO1, LDO2, LDO28
-	- BUCKn
-		  - valid values for n are:
-			- S2MPS11: 1 to 10
-			- S2MPS13: 1 to 10
-			- S2MPS14: 1 to 5
-			- S2MPS15: 1 to 10
-			- S2MPU02: 1 to 7
-		  - Example: BUCK1, BUCK2, BUCK9
-
-Example:
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		s2m_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "xx", "yy", "zz";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <50000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
new file mode 100644
index 0000000..ef0166d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
@@ -0,0 +1,84 @@
+Binding for Samsung S2M and S5M family multi-function device
+============================================================
+
+This is a part of device tree bindings for S2M and S5M family multi-function
+devices.
+
+The Samsung S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
+of multi-function devices which include voltage and current regulators, RTC,
+charger controller, clock outputs and other sub-blocks. It is interfaced
+to the host controller using an I2C interface. Each sub-block is usually
+addressed by the host system using different I2C slave addresses.
+
+
+This document describes bindings for main device node. Optional sub-blocks
+must be a sub-nodes to it. Bindings for them can be found in:
+ - bindings/regulator/samsung,s2mps11.txt
+ - bindings/clock/samsung,s2mps11.txt
+
+
+Required properties:
+ - compatible: Should be one of the following
+	- "samsung,s2mps11-pmic",
+	- "samsung,s2mps13-pmic",
+	- "samsung,s2mps14-pmic",
+	- "samsung,s2mps15-pmic",
+	- "samsung,s2mpu02-pmic".
+ - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
+
+Optional properties:
+ - interrupt-parent: Specifies the phandle of the interrupt controller to which
+   the interrupts from s2mps11 are delivered to.
+ - interrupts: Interrupt specifiers for interrupt sources.
+ - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
+   down. When the system is suspended it will always go down thus triggerring
+   unwanted buck warm reset (setting buck voltages to default values).
+ - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
+   connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
+   register to turn off the power. Usually the ACOKB is pulled up to VBATT so
+   when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
+
+Example:
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		s2m_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "xx", "yy", "zz";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
new file mode 100644
index 0000000..27a48bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
@@ -0,0 +1,102 @@
+Binding for Samsung S2M family regulator block
+==============================================
+
+This is a part of device tree bindings for S2M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators.
+
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Names of regulators supported by different devices:
+	- LDOn
+		  - valid values for n are:
+			- S2MPS11: 1 to 38
+			- S2MPS13: 1 to 40
+			- S2MPS14: 1 to 25
+			- S2MPS15: 1 to 27
+			- S2MPU02: 1 to 28
+		  - Example: LDO1, LDO2, LDO28
+	- BUCKn
+		  - valid values for n are:
+			- S2MPS11: 1 to 10
+			- S2MPS13: 1 to 10
+			- S2MPS14: 1 to 5
+			- S2MPS15: 1 to 10
+			- S2MPU02: 1 to 7
+		  - Example: BUCK1, BUCK2, BUCK9
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of the nodes under "regulators" sub-node:
+ - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500,
+   25000 (default) or 50000.
+
+   Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6}
+   by setting it to <0>.
+
+   Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value
+   will be set for a particular group of bucks so provide the same
+   regulator-ramp-delay value for them.
+   Groups sharing ramp rate:
+    - buck{1,6},
+    - buck{3,4},
+    - buck{7,8,10}.
+
+ - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be
+   configured to external control over GPIO. To turn this feature on this
+   property must be added to the regulator sub-node:
+    - samsung,ext-control-gpios: GPIO specifier for one GPIO
+                                 controlling this regulator (enable/disable)
+  Example:
+	LDO12 {
+		regulator-name = "V_EMMC_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		samsung,ext-control-gpios = <&gpk0 2 0>;
+	};
+
+
+Example:
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 25b7275..2c0bbce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9224,7 +9224,9 @@ F:	drivers/clk/clk-s2mps11.c
 F:	drivers/rtc/rtc-s5m.c
 F:	include/linux/mfd/samsung/
 F:	Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
-F:	Documentation/devicetree/bindings/mfd/s2mp*.txt
+F:	Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
+F:	Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
 
 SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
 M:	Kyungmin Park <kyungmin.park@samsung.com>
-- 
cgit v0.10.2


From 27383ca93b58dfb552ff51fc55fe48006d3c7d99 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Fri, 4 Dec 2015 10:10:04 +0900
Subject: dt-bindings: regulator/mfd: Reorganize S5M8767 bindings

The regulator/s5m8767-regulator.txt duplicates some of the information
about bindings with old mfd/s2mps11.txt. Now common part exists entirely
in mfd/samsung,sec-core.txt so:
 - add company prefix to file name (regulator/samsung,s5m8767.txt),
 - remove duplicated information,
 - reorganize the contents to match style of
   regulator/samsung,s2mps11.txt.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
index ef0166d..4aeb95c 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
@@ -14,6 +14,7 @@ addressed by the host system using different I2C slave addresses.
 This document describes bindings for main device node. Optional sub-blocks
 must be a sub-nodes to it. Bindings for them can be found in:
  - bindings/regulator/samsung,s2mps11.txt
+ - bindings/regulator/samsung,s5m8767.txt
  - bindings/clock/samsung,s2mps11.txt
 
 
@@ -23,7 +24,8 @@ Required properties:
 	- "samsung,s2mps13-pmic",
 	- "samsung,s2mps14-pmic",
 	- "samsung,s2mps15-pmic",
-	- "samsung,s2mpu02-pmic".
+	- "samsung,s2mpu02-pmic",
+	- "samsung,s5m8767-pmic".
  - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
deleted file mode 100644
index 2019131..0000000
--- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
+++ /dev/null
@@ -1,163 +0,0 @@
-* Samsung S5M8767 Voltage and Current Regulator
-
-The Samsung S5M8767 is a multi-function device which includes voltage and
-current regulators, rtc, charger controller and other sub-blocks. It is
-interfaced to the host controller using a i2c interface. Each sub-block is
-addressed by the host system using different i2c slave address. This document
-describes the bindings for 'pmic' sub-block of s5m8767.
-
-Required properties:
-- compatible: Should be "samsung,s5m8767-pmic".
-- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
-
-- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck2 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck3 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck4 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-  for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
-[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-    property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-    property should specify atleast one voltage level (which would be a
-    safe operating voltage).
-
-    If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-    property is specified, then all the eight voltage values for the
-    's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
-  the interrupts from s5m8767 are delivered to.
-- interrupts: Interrupt specifiers for two interrupt sources.
-  - First interrupt specifier is for 'irq1' interrupt.
-  - Second interrupt specifier is for 'alert' interrupt.
-- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
-- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
-- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
-
-Additional properties required if either of the optional properties are used:
-
-- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
-  the possible 8 options selectable by the dvs gpios. The value of this
-  property should be between 0 and 7. If not specified or if out of range, the
-  default value of this property is set to 0.
-
-- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
-  for dvs. The format of the gpio specifier depends in the gpio controller.
-
-Regulators: The regulators of s5m8767 that have to be instantiated should be
-included in a sub-node named 'regulators'. Regulator nodes included in this
-sub-node should be of the format as listed below.
-
-	regulator_name {
-		ldo1_reg: LDO1 {
-			regulator-name = "VDD_ALIVE_1.0V";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-always-on;
-			regulator-boot-on;
-			op_mode = <1>; /* Normal Mode */
-		};
-	};
-The above regulator entries are defined in regulator bindings documentation
-except these properties:
-	- op_mode: describes the different operating modes of the LDO's with
-		power mode change in SOC. The different possible values are,
-		0 - always off mode
-		1 - on in normal mode
-		2 - low power mode
-		3 - suspend mode
-	- s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
-		GPIO controlling this regulator (enable/disable); This is
-		valid only for buck9.
-
-The following are the names of the regulators that the s5m8767 pmic block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s5m8767.
-
-	- LDOn
-		  - valid values for n are 1 to 28
-		  - Example: LDO1, LDO2, LDO28
-	- BUCKn
-		  - valid values for n are 1 to 9.
-		  - Example: BUCK1, BUCK2, BUCK9
-
-The bindings inside the regulator nodes use the standard regulator bindings
-which are documented elsewhere.
-
-Example:
-
-	s5m8767_pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-
-		s5m8767,pmic-buck2-uses-gpio-dvs;
-		s5m8767,pmic-buck3-uses-gpio-dvs;
-		s5m8767,pmic-buck4-uses-gpio-dvs;
-
-		s5m8767,pmic-buck-default-dvs-idx = <0>;
-
-		s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
-						 <&gpx0 1 0>, /* DVS2 */
-						 <&gpx0 2 0>; /* DVS3 */
-
-		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
-						<&gpx2 4 0>, /* SET2 */
-						<&gpx2 5 0>; /* SET3 */
-
-		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-						 <1100000>, <1100000>,
-						 <1000000>, <1000000>,
-						 <1000000>, <1000000>;
-
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				op_mode = <1>; /* Normal Mode */
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF_1.2V";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vemmc_reg: BUCK9 {
-				regulator-name = "VMEM_VDD_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <3>; /* Standby Mode */
-				s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
new file mode 100644
index 0000000..093edda
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -0,0 +1,145 @@
+Binding for Samsung S5M8767 regulator block
+===========================================
+
+This is a part of device tree bindings for S5M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S5M8767 device provide buck and LDO regulators.
+
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+   units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+   for additional information.
+
+ - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+   units for buck3 when changing voltage using gpio dvs. Refer to [1] below
+   for additional information.
+
+ - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+   units for buck4 when changing voltage using gpio dvs. Refer to [1] below
+   for additional information.
+
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
+     property should specify atleast one voltage level (which would be a
+     safe operating voltage).
+
+     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
+ - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+ - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
+ - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+
+ - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+   the possible 8 options selectable by the dvs gpios. The value of this
+   property should be between 0 and 7. If not specified or if out of range, the
+   default value of this property is set to 0.
+
+ - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
+   for dvs. The format of the gpio specifier depends in the gpio controller.
+
+
+Names of regulators supported by S5M8767 device:
+	- LDOn
+		  - valid values for n are 1 to 28
+		  - Example: LDO1, LDO2, LDO28
+	- BUCKn
+		  - valid values for n are 1 to 9.
+		  - Example: BUCK1, BUCK2, BUCK9
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of the nodes under "regulators" sub-node:
+ - op_mode: describes the different operating modes of the LDO's with
+            power mode change in SOC. The different possible values are,
+             0 - always off mode
+             1 - on in normal mode
+             2 - low power mode
+             3 - suspend mode
+ - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
+                                   GPIO controlling this regulator
+                                   (enable/disable); This is valid only
+                                   for buck9.
+
+Example:
+
+	s5m8767_pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+
+		s5m8767,pmic-buck2-uses-gpio-dvs;
+		s5m8767,pmic-buck3-uses-gpio-dvs;
+		s5m8767,pmic-buck4-uses-gpio-dvs;
+
+		s5m8767,pmic-buck-default-dvs-idx = <0>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
+						 <&gpx0 1 0>, /* DVS2 */
+						 <&gpx0 2 0>; /* DVS3 */
+
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
+						<&gpx2 4 0>, /* SET2 */
+						<&gpx2 5 0>; /* SET3 */
+
+		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1000000>, <1000000>,
+						 <1000000>, <1000000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_1.2V";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vemmc_reg: BUCK9 {
+				regulator-name = "VMEM_VDD_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <3>; /* Standby Mode */
+				s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
+			};
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 2c0bbce..5d38715 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9223,9 +9223,9 @@ F:	drivers/regulator/s5m*.c
 F:	drivers/clk/clk-s2mps11.c
 F:	drivers/rtc/rtc-s5m.c
 F:	include/linux/mfd/samsung/
-F:	Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
 F:	Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
 F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
+F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
 F:	Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
 
 SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
-- 
cgit v0.10.2


From 5d1d147f040253cbdccc6dbdd14a002403cf8490 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Fri, 4 Dec 2015 10:10:05 +0900
Subject: dt-bindings: regulator/mfd: Reorganize S2MPA01 bindings

The mfd/s2mpa01.txt duplicates some of the information about bindings
with old mfd/s2mps11.txt. Now common part exists entirely in
mfd/samsung,sec-core.txt so:
 - add company prefix to file name (regulator/samsung,s2mpa01.txt),
 - remove duplicated information,
 - reorganize the contents to match style of
   regulator/samsung,s2mps11.txt.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/Documentation/devicetree/bindings/mfd/s2mpa01.txt b/Documentation/devicetree/bindings/mfd/s2mpa01.txt
deleted file mode 100644
index c13d3d8..0000000
--- a/Documentation/devicetree/bindings/mfd/s2mpa01.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-
-* Samsung S2MPA01 Voltage and Current Regulator
-
-The Samsung S2MPA01 is a multi-function device which includes high
-efficiency buck converters including Dual-Phase buck converter, various LDOs,
-and an RTC. It is interfaced to the host controller using an I2C interface.
-Each sub-block is addressed by the host system using different I2C slave
-addresses.
-
-Required properties:
-- compatible: Should be "samsung,s2mpa01-pmic".
-- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
-
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
-  the interrupts from s2mpa01 are delivered to.
-- interrupts: An interrupt specifier for the sole interrupt generated by the
-  device.
-
-Optional nodes:
-- regulators: The regulators of s2mpa01 that have to be instantiated should be
-  included in a sub-node named 'regulators'. Regulator nodes and constraints
-  included in this sub-node use the standard regulator bindings which are
-  documented elsewhere.
-
-Properties for BUCK regulator nodes:
-- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
-  (default), 25000, or 50000. May be 0 for disabling the ramp delay on
-  BUCK{1,2,3,4}.
-
- In the absence of the regulator-ramp-delay property, the default ramp
- delay will be used.
-
-  NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
-  for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
-
-  The following BUCKs share ramp settings:
-  * 1 and 6
-  * 2 and 4
-  * 8, 9, and 10
-
-The following are the names of the regulators that the s2mpa01 PMIC block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s2mpa01.
-
-	- LDOn
-		  - valid values for n are 1 to 26
-		  - Example: LDO1, LD02, LDO26
-	- BUCKn
-		  - valid values for n are 1 to 10.
-		  - Example: BUCK1, BUCK2, BUCK9
-
-Example:
-
-	s2mpa01_pmic@66 {
-		compatible = "samsung,s2mpa01-pmic";
-		reg = <0x66>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDDQ_MMC2";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <50000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
index 4aeb95c..cdd079b 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
@@ -4,7 +4,7 @@ Binding for Samsung S2M and S5M family multi-function device
 This is a part of device tree bindings for S2M and S5M family multi-function
 devices.
 
-The Samsung S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
+The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
 of multi-function devices which include voltage and current regulators, RTC,
 charger controller, clock outputs and other sub-blocks. It is interfaced
 to the host controller using an I2C interface. Each sub-block is usually
@@ -13,6 +13,7 @@ addressed by the host system using different I2C slave addresses.
 
 This document describes bindings for main device node. Optional sub-blocks
 must be a sub-nodes to it. Bindings for them can be found in:
+ - bindings/regulator/samsung,s2mpa01.txt
  - bindings/regulator/samsung,s2mps11.txt
  - bindings/regulator/samsung,s5m8767.txt
  - bindings/clock/samsung,s2mps11.txt
@@ -20,6 +21,7 @@ must be a sub-nodes to it. Bindings for them can be found in:
 
 Required properties:
  - compatible: Should be one of the following
+	- "samsung,s2mpa01-pmic",
 	- "samsung,s2mps11-pmic",
 	- "samsung,s2mps13-pmic",
 	- "samsung,s2mps14-pmic",
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
new file mode 100644
index 0000000..bae3c7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
@@ -0,0 +1,79 @@
+Binding for Samsung S2MPA01 regulator block
+===========================================
+
+This is a part of device tree bindings for S2M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPA01 device provide buck and LDO regulators.
+
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Names of regulators supported by S2MPA01 device:
+	- LDOn
+		  - valid values for n are 1 to 26
+		  - Example: LDO1, LD02, LDO26
+	- BUCKn
+		  - valid values for n are 1 to 10.
+		  - Example: BUCK1, BUCK2, BUCK9
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of buck regulator nodes under "regulators" sub-node:
+ - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
+   (default), 25000, or 50000. May be 0 for disabling the ramp delay on
+   BUCK{1,2,3,4}.
+
+   In the absence of the regulator-ramp-delay property, the default ramp
+   delay will be used.
+
+   Note: Some bucks share the ramp rate setting i.e. same ramp value
+   will be set for a particular group of bucks so provide the same
+   regulator-ramp-delay value for them.
+   Groups sharing ramp rate:
+    - buck{1,6},
+    - buck{2,4},
+    - buck{8,9,10}.
+
+Example:
+
+	s2mpa01_pmic@66 {
+		compatible = "samsung,s2mpa01-pmic";
+		reg = <0x66>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};
-- 
cgit v0.10.2


From 1b5420e1f587b05de49b36472fefad5949042d00 Mon Sep 17 00:00:00 2001
From: Geliang Tang <geliangtang@163.com>
Date: Mon, 28 Dec 2015 23:00:14 +0800
Subject: mfd: Use to_i2c_client() instead of open-coding it

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c
index 63445ea..3f24ecb 100644
--- a/drivers/mfd/88pm80x.c
+++ b/drivers/mfd/88pm80x.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(pm80x_deinit);
 #ifdef CONFIG_PM_SLEEP
 static int pm80x_suspend(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct pm80x_chip *chip = i2c_get_clientdata(client);
 
 	if (chip && chip->wu_flag)
@@ -147,7 +147,7 @@ static int pm80x_suspend(struct device *dev)
 
 static int pm80x_resume(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct pm80x_chip *chip = i2c_get_clientdata(client);
 
 	if (chip && chip->wu_flag)
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 3269a99..e497cee 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -1218,7 +1218,7 @@ static int pm860x_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int pm860x_suspend(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct pm860x_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev) && chip->wakeup_flag)
@@ -1228,7 +1228,7 @@ static int pm860x_suspend(struct device *dev)
 
 static int pm860x_resume(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct pm860x_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev) && chip->wakeup_flag)
diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index 56e216d..2280b3f 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -495,7 +495,7 @@ MODULE_DEVICE_TABLE(i2c, max14577_i2c_id);
 #ifdef CONFIG_PM_SLEEP
 static int max14577_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -516,7 +516,7 @@ static int max14577_suspend(struct device *dev)
 
 static int max14577_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index d19be64..d959ebb 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -352,7 +352,7 @@ MODULE_DEVICE_TABLE(i2c, max77686_i2c_id);
 #ifdef CONFIG_PM_SLEEP
 static int max77686_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -374,7 +374,7 @@ static int max77686_suspend(struct device *dev)
 
 static int max77686_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 007f729..b83b7a7 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -334,7 +334,7 @@ MODULE_DEVICE_TABLE(i2c, max77693_i2c_id);
 
 static int max77693_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev)) {
@@ -347,7 +347,7 @@ static int max77693_suspend(struct device *dev)
 
 static int max77693_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev)) {
diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
index 586098f..7cfc95b 100644
--- a/drivers/mfd/max77843.c
+++ b/drivers/mfd/max77843.c
@@ -197,7 +197,7 @@ MODULE_DEVICE_TABLE(i2c, max77843_id);
 
 static int __maybe_unused max77843_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
 
 	disable_irq(max77843->irq);
@@ -209,7 +209,7 @@ static int __maybe_unused max77843_suspend(struct device *dev)
 
 static int __maybe_unused max77843_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index b0fe810..70443b1 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -215,7 +215,7 @@ static int max8925_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int max8925_suspend(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct max8925_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev) && chip->wakeup_flag)
@@ -225,7 +225,7 @@ static int max8925_suspend(struct device *dev)
 
 static int max8925_resume(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct max8925_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev) && chip->wakeup_flag)
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 156ed6f..f316348 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -437,7 +437,7 @@ static u8 max8997_dumpaddr_haptic[] = {
 
 static int max8997_freeze(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 	int i;
 
@@ -459,7 +459,7 @@ static int max8997_freeze(struct device *dev)
 
 static int max8997_restore(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 	int i;
 
@@ -481,7 +481,7 @@ static int max8997_restore(struct device *dev)
 
 static int max8997_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -491,7 +491,7 @@ static int max8997_suspend(struct device *dev)
 
 static int max8997_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index a7afe3b..ab28b29 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -274,7 +274,7 @@ MODULE_DEVICE_TABLE(i2c, max8998_i2c_id);
 
 static int max8998_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -284,7 +284,7 @@ static int max8998_suspend(struct device *dev)
 
 static int max8998_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -344,7 +344,7 @@ static struct max8998_reg_dump max8998_dump[] = {
 /* Save registers before hibernation */
 static int max8998_freeze(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(max8998_dump); i++)
@@ -357,7 +357,7 @@ static int max8998_freeze(struct device *dev)
 /* Restore registers after hibernation */
 static int max8998_restore(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(max8998_dump); i++)
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index c9802ba..400e1d7 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -536,7 +536,7 @@ static void sec_pmic_shutdown(struct i2c_client *i2c)
 #ifdef CONFIG_PM_SLEEP
 static int sec_pmic_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -557,7 +557,7 @@ static int sec_pmic_suspend(struct device *dev)
 
 static int sec_pmic_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
-- 
cgit v0.10.2


From 0b81995148f80f4fa0ce19e66d2e66abe82f456a Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Fri, 8 Jan 2016 11:29:42 +0000
Subject: mfd: arizona: Add device tree binding documentation for new clock
 driver

Specify the device tree binding for the input clocks to Arizona devices.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 069e31d..9b30011 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -51,6 +51,13 @@ Optional properties:
 
   - wlf,reset : GPIO specifier for the GPIO controlling /RESET
 
+  - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
+  - clock-names: Should contains two strings:
+      "mclk1" for the clock supplied on MCLK1, recommended to be a high
+      quality audio reference clock
+      "mclk2" for the clock supplied on MCLK2, recommended to be an always on
+      32k clock
+
   - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
     for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
     absent, no configuration of these registers is performed. If any entry has
-- 
cgit v0.10.2


From f90dff44641dedea02b1549a9dd5c00bae9230da Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Tue, 27 Oct 2015 16:12:21 +0000
Subject: mfd: 88pm860x-core: Fix commenting and declaration spacing

Checkpatch output:

WARNING: Block comments use a trailing */ on a separate line
+        * - turn off */

WARNING: Missing a blank line after declarations
+       int ret;
+       ret = i2c_add_driver(&pm860x_driver);

total: 0 errors, 2 warnings, 1283 lines checked

Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index e497cee..25e1aaf 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -705,10 +705,12 @@ int pm8606_osc_disable(struct pm860x_chip *chip, unsigned short client)
 			chip->osc_status);
 
 	mutex_lock(&chip->osc_lock);
-	/*Update voting status */
+	/* Update voting status */
 	chip->osc_vote &= ~(client);
-	/* If reference group is off and this is the last client to release
-	 * - turn off */
+	/*
+	 * If reference group is off and this is the last client to release
+	 * - turn off
+	 */
 	if ((chip->osc_status != PM8606_REF_GP_OSC_OFF) &&
 			(chip->osc_vote == REF_GP_NO_CLIENTS)) {
 		chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN;
@@ -1265,6 +1267,7 @@ static struct i2c_driver pm860x_driver = {
 static int __init pm860x_i2c_init(void)
 {
 	int ret;
+
 	ret = i2c_add_driver(&pm860x_driver);
 	if (ret != 0)
 		pr_err("Failed to register 88PM860x I2C driver: %d\n", ret);
-- 
cgit v0.10.2


From 4374b20c6c4fa8533e932567be9cd8872286da95 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Tue, 27 Oct 2015 16:14:06 +0000
Subject: mfd: aat2870-core: Remove unnecessary 'out of memory' message

WARNING: Possible unnecessary 'out of memory' message
+       if (!aat2870) {
+               dev_err(&client->dev,

total: 0 errors, 1 warnings, 524 lines checked

Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index 29b6a2d..3ba19a4 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -373,11 +373,8 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 
 	aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data),
 				GFP_KERNEL);
-	if (!aat2870) {
-		dev_err(&client->dev,
-			"Failed to allocate memory for aat2870\n");
+	if (!aat2870)
 		return -ENOMEM;
-	}
 
 	aat2870->dev = &client->dev;
 	dev_set_drvdata(aat2870->dev, aat2870);
-- 
cgit v0.10.2


From 15544cab2880c6990704ff91c0f11c5ccc3aafad Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Tue, 27 Oct 2015 16:19:31 +0000
Subject: mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch

WARNING: Missing a blank line after declarations
+       struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+       if (!ab3100->startup_events_read)

WARNING: Possible unnecessary 'out of memory' message
+       if (!ab3100) {
+               dev_err(&client->dev, "could not allocate AB3100 device\n");

WARNING: else is not generally useful after a break or return
+                               break;
+                       } else {

total: 0 errors, 3 warnings, 996 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index f0afb44..6a5a988 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -381,9 +381,11 @@ static int ab3100_event_registers_startup_state_get(struct device *dev,
 					     u8 *event)
 {
 	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
 	if (!ab3100->startup_events_read)
 		return -EAGAIN; /* Try again later */
 	memcpy(event, ab3100->startup_events, 3);
+
 	return 0;
 }
 
@@ -858,10 +860,8 @@ static int ab3100_probe(struct i2c_client *client,
 	int i;
 
 	ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL);
-	if (!ab3100) {
-		dev_err(&client->dev, "could not allocate AB3100 device\n");
+	if (!ab3100)
 		return -ENOMEM;
-	}
 
 	/* Initialize data structure */
 	mutex_init(&ab3100->access_mutex);
@@ -883,20 +883,17 @@ static int ab3100_probe(struct i2c_client *client,
 
 	for (i = 0; ids[i].id != 0x0; i++) {
 		if (ids[i].id == ab3100->chip_id) {
-			if (ids[i].name != NULL) {
-				snprintf(&ab3100->chip_name[0],
-					 sizeof(ab3100->chip_name) - 1,
-					 "AB3100 %s",
-					 ids[i].name);
+			if (ids[i].name)
 				break;
-			} else {
-				dev_err(&client->dev,
-					"AB3000 is not supported\n");
-				goto exit_no_detect;
-			}
+
+			dev_err(&client->dev, "AB3000 is not supported\n");
+			goto exit_no_detect;
 		}
 	}
 
+	snprintf(&ab3100->chip_name[0],
+		 sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name);
+
 	if (ids[i].id == 0x0) {
 		dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
 			ab3100->chip_id);
-- 
cgit v0.10.2


From 845b76f891999f98b7acb439768c9d50959d29e1 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 09:08:22 +0000
Subject: mfd: ab2100-otp: Remove pointless 'out of memory' error message

WARNING: Possible unnecessary 'out of memory' message
+       if (!otp) {
+               dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");

total: 0 errors, 1 warnings, 250 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
index f391c5fe..55b207a 100644
--- a/drivers/mfd/ab3100-otp.c
+++ b/drivers/mfd/ab3100-otp.c
@@ -188,10 +188,9 @@ static int __init ab3100_otp_probe(struct platform_device *pdev)
 	int i;
 
 	otp = devm_kzalloc(&pdev->dev, sizeof(struct ab3100_otp), GFP_KERNEL);
-	if (!otp) {
-		dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");
+	if (!otp)
 		return -ENOMEM;
-	}
+
 	otp->dev = &pdev->dev;
 
 	/* Replace platform data coming in with a local struct */
-- 
cgit v0.10.2


From 500e69a1011d66897a08e000d92bcfd39372337e Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 09:15:02 +0000
Subject: mfd: ab8500-core: Fix many warnings reported by Checkpatch

WARNING: Block comments use a trailing */ on a separate line
+        * */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 17))
+                       *offset = 24;

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 16))
+                       *offset = 25;

WARNING: suspect code indent for conditional statements (8, 24)
+       if ((i == 3) && (*offset >= 24))
+                       *offset += 2;

WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+               return -ENOSYS;

WARNING: static const char * array should probably be static const char * const
+       static const char *switch_off_status[] = {

WARNING: static const char * array should probably be static const char * const
+       static const char *turn_on_status[] = {

total: 0 errors, 9 warnings, 1867 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 582d358..f3d6891 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -113,7 +113,7 @@
 #define AB8500_SWITCH_OFF_STATUS	0x00
 
 #define AB8500_TURN_ON_STATUS		0x00
-#define AB8505_TURN_ON_STATUS_2	0x04
+#define AB8505_TURN_ON_STATUS_2		0x04
 
 #define AB8500_CH_USBCH_STAT1_REG	0x02
 #define VBUS_DET_DBNC100		0x02
@@ -211,7 +211,7 @@ static int set_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	/*
 	 * Put the u8 bank and u8 register together into a an u16.
 	 * The bank on higher 8 bits and register in lower 8 bits.
-	 * */
+	 */
 	u16 addr = ((u16)bank) << 8 | reg;
 
 	dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
@@ -243,8 +243,6 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	u8 reg, u8 *value)
 {
 	int ret;
-	/* put the u8 bank and u8 reg together into a an u16.
-	 * bank on higher 8 bits and reg in lower */
 	u16 addr = ((u16)bank) << 8 | reg;
 
 	mutex_lock(&ab8500->lock);
@@ -278,8 +276,6 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	u8 reg, u8 bitmask, u8 bitvalues)
 {
 	int ret;
-	/* put the u8 bank and u8 reg together into a an u16.
-	 * bank on higher 8 bits and reg in lower */
 	u16 addr = ((u16)bank) << 8 | reg;
 
 	mutex_lock(&ab8500->lock);
@@ -449,12 +445,12 @@ static void update_latch_offset(u8 *offset, int i)
 {
 	/* Fix inconsistent ITFromLatch25 bit mapping... */
 	if (unlikely(*offset == 17))
-			*offset = 24;
+		*offset = 24;
 	/* Fix inconsistent ab8540 bit mapping... */
 	if (unlikely(*offset == 16))
-			*offset = 25;
+		*offset = 25;
 	if ((i == 3) && (*offset >= 24))
-			*offset += 2;
+		*offset += 2;
 }
 
 static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
@@ -590,12 +586,12 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np)
 
 	/* If ->irq_base is zero this will give a linear mapping */
 	ab8500->domain = irq_domain_add_simple(ab8500->dev->of_node,
-			num_irqs, 0,
-			&ab8500_irq_ops, ab8500);
+					       num_irqs, 0,
+					       &ab8500_irq_ops, ab8500);
 
 	if (!ab8500->domain) {
 		dev_err(ab8500->dev, "Failed to create irqdomain\n");
-		return -ENOSYS;
+		return -ENODEV;
 	}
 
 	return 0;
@@ -1073,7 +1069,7 @@ static struct attribute_group ab9540_attr_group = {
 
 static int ab8500_probe(struct platform_device *pdev)
 {
-	static const char *switch_off_status[] = {
+	static const char * const switch_off_status[] = {
 		"Swoff bit programming",
 		"Thermal protection activation",
 		"Vbat lower then BattOk falling threshold",
@@ -1082,7 +1078,7 @@ static int ab8500_probe(struct platform_device *pdev)
 		"Battery level lower than power on reset threshold",
 		"Power on key 1 pressed longer than 10 seconds",
 		"DB8500 thermal shutdown"};
-	static const char *turn_on_status[] = {
+	static const char * const turn_on_status[] = {
 		"Battery rising (Vbat)",
 		"Power On Key 1 dbF",
 		"Power On Key 2 dbF",
-- 
cgit v0.10.2


From de6a76933317a4dee9b33e1989623cf31098e2ff Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 09:27:32 +0000
Subject: mfd: ab8500-debugfs: Clean-up non-conforming commenting and print
 formatting

WARNING: Block comments use a trailing */ on a separate line
+                        * not be accessed from here */

WARNING: Block comments use a trailing */ on a separate line
+                        * not be accessed from here */

WARNING: Block comments use a trailing */ on a separate line
+                                * the output is wanted in any case */

WARNING: Consecutive strings are generally better as a single string
+               "  addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n",

total: 0 errors, 4 warnings, 3331 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 0236cd7..69d9fff 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -242,8 +242,10 @@ static struct ab8500_prcmu_ranges ab8500_debug_ranges[AB8500_NUM_BANKS] = {
 				.first = 0x40,
 				.last = 0x44,
 			},
-			/* 0x80-0x8B is SIM registers and should
-			 * not be accessed from here */
+			/*
+			 * 0x80-0x8B are SIM registers and should
+			 * not be accessed from here
+			 */
 		},
 	},
 	[AB8500_USB] = {
@@ -587,8 +589,10 @@ static struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = {
 				.first = 0x40,
 				.last = 0x48,
 			},
-			/* 0x80-0x8B is SIM registers and should
-			 * not be accessed from here */
+			/*
+			 * 0x80-0x8B are SIM registers and should
+			 * not be accessed from here
+			 */
 		},
 	},
 	[AB8500_USB] = {
@@ -1306,8 +1310,10 @@ static int ab8500_registers_print(struct device *dev, u32 bank,
 			if (s) {
 				seq_printf(s, "  [0x%02X/0x%02X]: 0x%02X\n",
 					   bank, reg, value);
-				/* Error is not returned here since
-				 * the output is wanted in any case */
+				/*
+				 * Error is not returned here since
+				 * the output is wanted in any case
+				 */
 				if (seq_has_overflowed(s))
 					return 0;
 			} else {
@@ -2740,10 +2746,9 @@ static ssize_t hwreg_common_write(char *b, struct hwreg_cfg *cfg,
 	*cfg = loc;
 
 #ifdef ABB_HWREG_DEBUG
-	pr_warn("HWREG request: %s, %s,\n"
-		"  addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n",
-		(write) ? "write" : "read",
-		REG_FMT_DEC(cfg) ? "decimal" : "hexa",
+	pr_warn("HWREG request: %s, %s,\n", (write) ? "write" : "read",
+		REG_FMT_DEC(cfg) ? "decimal" : "hexa");
+	pr_warn("  addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n",
 		cfg->addr, cfg->mask, cfg->shift, val);
 #endif
 
-- 
cgit v0.10.2


From df36442cfe2689e1b26c9633c17a28a9fe4e91ec Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 10:32:10 +0000
Subject: mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and
 one error

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN                        (-6000) /* mA range measured by ADC for ib
t*/

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN_V              (-60)   /* mV range measured by ADC for ibat*/

WARNING: suspect code indent for conditional statements (16, 20)
+               if (!strcmp(name, dev_name(gpadc->dev)))
+                   return gpadc;

WARNING: suspect code indent for conditional statements (0, 16)
+if (ad_value < 0) {
+               dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",

WARNING: quoted string split across lines
+               dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+                       " %d AD: 0x%x\n", channel, ad_value);

WARNING: Missing a blank line after declarations
+       int raw_data;
+       raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(10);

ERROR: else should follow close brace '}'
+       }
+       else

WARNING: line over 80 characters
+                       delay_max = 10000; /* large range to optimise sleep mode */

WARNING: line over 80 characters
+                       gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;

WARNING: line over 80 characters
+       gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);

WARNING: Possible unnecessary 'out of memory' message
+       if (!gpadc) {
+               dev_err(&pdev->dev, "Error: No memory\n");

WARNING: space prohibited before semicolon
+       return ;

WARNING: void function return statements are not generally useful
+       return ;
+}

WARNING: quoted string split across lines
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+               "M'boumba Cedric Madianga");

total: 1 errors, 14 warnings, 1089 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index c51c1b1..97dcadc 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -49,61 +49,61 @@
  * OTP register offsets
  * Bank : 0x15
  */
-#define AB8500_GPADC_CAL_1		0x0F
-#define AB8500_GPADC_CAL_2		0x10
-#define AB8500_GPADC_CAL_3		0x11
-#define AB8500_GPADC_CAL_4		0x12
-#define AB8500_GPADC_CAL_5		0x13
-#define AB8500_GPADC_CAL_6		0x14
-#define AB8500_GPADC_CAL_7		0x15
+#define AB8500_GPADC_CAL_1	0x0F
+#define AB8500_GPADC_CAL_2	0x10
+#define AB8500_GPADC_CAL_3	0x11
+#define AB8500_GPADC_CAL_4	0x12
+#define AB8500_GPADC_CAL_5	0x13
+#define AB8500_GPADC_CAL_6	0x14
+#define AB8500_GPADC_CAL_7	0x15
 /* New calibration for 8540 */
 #define AB8540_GPADC_OTP4_REG_7	0x38
 #define AB8540_GPADC_OTP4_REG_6	0x39
 #define AB8540_GPADC_OTP4_REG_5	0x3A
 
 /* gpadc constants */
-#define EN_VINTCORE12			0x04
-#define EN_VTVOUT			0x02
-#define EN_GPADC			0x01
-#define DIS_GPADC			0x00
-#define AVG_1				0x00
-#define AVG_4				0x20
-#define AVG_8				0x40
-#define AVG_16				0x60
-#define ADC_SW_CONV			0x04
-#define EN_ICHAR			0x80
-#define BTEMP_PULL_UP			0x08
-#define EN_BUF				0x40
-#define DIS_ZERO			0x00
-#define GPADC_BUSY			0x01
-#define EN_FALLING			0x10
-#define EN_TRIG_EDGE			0x02
-#define EN_VBIAS_XTAL_TEMP		0x02
+#define EN_VINTCORE12		0x04
+#define EN_VTVOUT		0x02
+#define EN_GPADC		0x01
+#define DIS_GPADC		0x00
+#define AVG_1			0x00
+#define AVG_4			0x20
+#define AVG_8			0x40
+#define AVG_16			0x60
+#define ADC_SW_CONV		0x04
+#define EN_ICHAR		0x80
+#define BTEMP_PULL_UP		0x08
+#define EN_BUF			0x40
+#define DIS_ZERO		0x00
+#define GPADC_BUSY		0x01
+#define EN_FALLING		0x10
+#define EN_TRIG_EDGE		0x02
+#define EN_VBIAS_XTAL_TEMP	0x02
 
 /* GPADC constants from AB8500 spec, UM0836 */
-#define ADC_RESOLUTION			1024
-#define ADC_CH_BTEMP_MIN		0
-#define ADC_CH_BTEMP_MAX		1350
-#define ADC_CH_DIETEMP_MIN		0
-#define ADC_CH_DIETEMP_MAX		1350
-#define ADC_CH_CHG_V_MIN		0
-#define ADC_CH_CHG_V_MAX		20030
-#define ADC_CH_ACCDET2_MIN		0
-#define ADC_CH_ACCDET2_MAX		2500
-#define ADC_CH_VBAT_MIN			2300
-#define ADC_CH_VBAT_MAX			4800
-#define ADC_CH_CHG_I_MIN		0
-#define ADC_CH_CHG_I_MAX		1500
-#define ADC_CH_BKBAT_MIN		0
-#define ADC_CH_BKBAT_MAX		3200
+#define ADC_RESOLUTION		1024
+#define ADC_CH_BTEMP_MIN	0
+#define ADC_CH_BTEMP_MAX	1350
+#define ADC_CH_DIETEMP_MIN	0
+#define ADC_CH_DIETEMP_MAX	1350
+#define ADC_CH_CHG_V_MIN	0
+#define ADC_CH_CHG_V_MAX	20030
+#define ADC_CH_ACCDET2_MIN	0
+#define ADC_CH_ACCDET2_MAX	2500
+#define ADC_CH_VBAT_MIN		2300
+#define ADC_CH_VBAT_MAX		4800
+#define ADC_CH_CHG_I_MIN	0
+#define ADC_CH_CHG_I_MAX	1500
+#define ADC_CH_BKBAT_MIN	0
+#define ADC_CH_BKBAT_MAX	3200
 
 /* GPADC constants from AB8540 spec */
-#define ADC_CH_IBAT_MIN			(-6000) /* mA range measured by ADC for ibat*/
-#define ADC_CH_IBAT_MAX			6000
-#define ADC_CH_IBAT_MIN_V		(-60)	/* mV range measured by ADC for ibat*/
-#define ADC_CH_IBAT_MAX_V		60
-#define IBAT_VDROP_L			(-56)  /* mV */
-#define IBAT_VDROP_H			56
+#define ADC_CH_IBAT_MIN		(-6000) /* mA range measured by ADC for ibat */
+#define ADC_CH_IBAT_MAX		6000
+#define ADC_CH_IBAT_MIN_V	(-60)	/* mV range measured by ADC for ibat */
+#define ADC_CH_IBAT_MAX_V	60
+#define IBAT_VDROP_L		(-56)  /* mV */
+#define IBAT_VDROP_H		56
 
 /* This is used to not lose precision when dividing to get gain and offset */
 #define CALIB_SCALE		1000
@@ -179,7 +179,7 @@ struct ab8500_gpadc *ab8500_gpadc_get(char *name)
 
 	list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
 		if (!strcmp(name, dev_name(gpadc->dev)))
-		    return gpadc;
+			return gpadc;
 	}
 
 	return ERR_PTR(-ENOENT);
@@ -315,11 +315,12 @@ int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
 
 	ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
 			trig_edge, trig_timer, conv_type);
-/* On failure retry a second time */
+
+	/* On failure retry a second time */
 	if (ad_value < 0)
 		ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
 			trig_edge, trig_timer, conv_type);
-if (ad_value < 0) {
+	if (ad_value < 0) {
 		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
 				channel);
 		return ad_value;
@@ -327,8 +328,9 @@ if (ad_value < 0) {
 
 	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
 	if (voltage < 0)
-		dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
-			" %d AD: 0x%x\n", channel, ad_value);
+		dev_err(gpadc->dev,
+			"GPADC to voltage conversion failed ch: %d AD: 0x%x\n",
+			channel, ad_value);
 
 	return voltage;
 }
@@ -348,10 +350,9 @@ EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
 int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
 {
-	int raw_data;
-	raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,
-			avg_sample, trig_edge, trig_timer, conv_type, NULL);
-	return raw_data;
+	return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample,
+					    trig_edge, trig_timer, conv_type,
+					    NULL);
 }
 
 int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
@@ -388,7 +389,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 			goto out;
 		if (!(val & GPADC_BUSY))
 			break;
-		msleep(10);
+		msleep(20);
 	} while (++looplimit < 10);
 	if (looplimit >= 10 && (val & GPADC_BUSY)) {
 		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
@@ -421,8 +422,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 		val_reg1 |= EN_TRIG_EDGE;
 		if (trig_edge)
 			val_reg1 |= EN_FALLING;
-	}
-	else
+	} else
 		ret = abx500_set_register_interruptible(gpadc->dev,
 				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
 	if (ret < 0) {
@@ -449,7 +449,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 			* remove when hardware will be availible
 			*/
 			delay_min = 1000; /* Delay in micro seconds */
-			delay_max = 10000; /* large range to optimise sleep mode */
+			delay_max = 10000; /* large range optimises sleepmode */
 			break;
 		}
 		/* Intentional fallthrough */
@@ -785,9 +785,10 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 				<< CALIB_SHIFT_IBAT)
 				/ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
 
-			gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;
-			gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset *
-				V2A_gain + V2A_offset;
+			gpadc->cal_data[ADC_INPUT_IBAT].gain =
+				V_gain * V2A_gain;
+			gpadc->cal_data[ADC_INPUT_IBAT].offset =
+				V_offset * V2A_gain + V2A_offset;
 		} else {
 			gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
 		}
@@ -923,11 +924,10 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	int ret = 0;
 	struct ab8500_gpadc *gpadc;
 
-	gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);
-	if (!gpadc) {
-		dev_err(&pdev->dev, "Error: No memory\n");
+	gpadc = devm_kzalloc(&pdev->dev,
+			     sizeof(struct ab8500_gpadc), GFP_KERNEL);
+	if (!gpadc)
 		return -ENOMEM;
-	}
 
 	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
 	if (gpadc->irq_sw < 0)
@@ -1072,18 +1072,19 @@ void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
 	*vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
 	*btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
 	*btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
-	*vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
-	*vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
-	*ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
-	*ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
-	return ;
+	*vbat_l  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
+	*vbat_h  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
+	*ibat_l  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
+	*ibat_h  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
 }
 
 subsys_initcall_sync(ab8500_gpadc_init);
 module_exit(ab8500_gpadc_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
-		"M'boumba Cedric Madianga");
+MODULE_AUTHOR("Arun R Murthy");
+MODULE_AUTHOR("Daniel Willerud");
+MODULE_AUTHOR("Johan Palsson");
+MODULE_AUTHOR("M'boumba Cedric Madianga");
 MODULE_ALIAS("platform:ab8500_gpadc");
 MODULE_DESCRIPTION("AB8500 GPADC driver");
-- 
cgit v0.10.2


From 63b4fd7502790b16257396cc0270fa698bdec2b1 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 11:11:05 +0000
Subject: mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting
 issues

WARNING: char * array declaration might be better as static const
+       static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then
 pr_info(...  to printk(KERN_INFO ...
+                       printk(KERN_INFO

WARNING: quoted string split across lines
+                              "Charger \"%s\" is connected with known battery."
+                              " Rebooting.\n",

WARNING: quoted string split across lines
+                                       "unable to set sysClkReq%dRfClkBuf: "
+                                       "%d\n", j + 1, ret);

total: 0 errors, 4 warnings, 199 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 0d18256..b9f0010 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -27,7 +27,7 @@ static void ab8500_power_off(void)
 {
 	sigset_t old;
 	sigset_t all;
-	static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
+	static const char * const pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
 	int i;
 	bool charger_present = false;
 	union power_supply_propval val;
@@ -68,10 +68,9 @@ static void ab8500_power_off(void)
 		ret = power_supply_get_property(psy,
 				POWER_SUPPLY_PROP_TECHNOLOGY, &val);
 		if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) {
-			printk(KERN_INFO
-			       "Charger \"%s\" is connected with known battery."
-			       " Rebooting.\n",
-			       pss[i]);
+			pr_info("Charger '%s' is connected with known battery",
+				pss[i]);
+			pr_info(" - Rebooting.\n");
 			machine_restart("charging");
 		}
 		power_supply_put(psy);
@@ -161,8 +160,8 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev)
 					pdata->initial_req_buf_config[j]);
 			if (ret < 0) {
 				dev_err(&pdev->dev,
-					"unable to set sysClkReq%dRfClkBuf: "
-					"%d\n", j + 1, ret);
+					"Can't set sysClkReq%dRfClkBuf: %d\n",
+					j + 1, ret);
 			}
 		}
 	}
-- 
cgit v0.10.2


From 3103d44e4509f6da8b667d185b45eb0ae0beaa85 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 12:21:12 +0000
Subject: mfd: adp5520: Some trivial 'no space before tab' fixes

WARNING: please, no space before tabs
+ * ^IMike Rapoport <mike@compulab.co.il>$

WARNING: please, no space before tabs
+ * ^IEric Miao <eric.miao@marvell.com>$

WARNING: please, no space before tabs
+^I.id_table ^I= adp5520_id,$

total: 0 errors, 3 warnings, 365 lines checked

Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index ae88654..d817f20 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -9,10 +9,10 @@
  *
  * Derived from da903x:
  * Copyright (C) 2008 Compulab, Ltd.
- * 	Mike Rapoport <mike@compulab.co.il>
+ *	Mike Rapoport <mike@compulab.co.il>
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
- * 	Eric Miao <eric.miao@marvell.com>
+ *	Eric Miao <eric.miao@marvell.com>
  *
  * Licensed under the GPL-2 or later.
  */
@@ -355,7 +355,7 @@ static struct i2c_driver adp5520_driver = {
 	},
 	.probe		= adp5520_probe,
 	.remove		= adp5520_remove,
-	.id_table 	= adp5520_id,
+	.id_table	= adp5520_id,
 };
 
 module_i2c_driver(adp5520_driver);
-- 
cgit v0.10.2


From b79a980f7161ca09855cc641091d1afe4ef08dd8 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 12:42:30 +0000
Subject: mfd: arizona-core: msleep() is unreliable for anything <20ms use
 usleep_range() instead

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+                       msleep(5);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

total: 0 errors, 4 warnings, 1407 lines checked

Cc: patches@opensource.wolfsonmicro.com
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 4bb4866..5319f25 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -238,7 +238,7 @@ static int arizona_poll_reg(struct arizona *arizona,
 		if ((val & mask) == target)
 			return 0;
 
-		msleep(1);
+		usleep_range(1000, 5000);
 	}
 
 	dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
@@ -279,14 +279,14 @@ static void arizona_disable_reset(struct arizona *arizona)
 		case WM5110:
 		case WM8280:
 			/* Meet requirements for minimum reset duration */
-			msleep(5);
+			usleep_range(5000, 10000);
 			break;
 		default:
 			break;
 		}
 
 		gpio_set_value_cansleep(arizona->pdata.reset, 1);
-		msleep(1);
+		usleep_range(1000, 5000);
 	}
 }
 
@@ -1132,7 +1132,7 @@ int arizona_dev_init(struct arizona *arizona)
 			goto err_reset;
 		}
 
-		msleep(1);
+		usleep_range(1000, 5000);
 	}
 
 	/* Ensure device startup is complete */
-- 
cgit v0.10.2


From 9f6e872a7003ea6b7f38bcfd5ee6c1e05b18672b Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 13:54:07 +0000
Subject: mfd: arizona-i2c: Add blank line formatting after declaration

WARNING: Missing a blank line after declarations
+       struct arizona *arizona = dev_get_drvdata(&i2c->dev);
+       arizona_dev_exit(arizona);

total: 0 errors, 1 warnings, 120 lines checked

Cc: patches@opensource.wolfsonmicro.com
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/arizona-i2c.c b/drivers/mfd/arizona-i2c.c
index 4e3afd1..5fe1296 100644
--- a/drivers/mfd/arizona-i2c.c
+++ b/drivers/mfd/arizona-i2c.c
@@ -88,7 +88,9 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
 static int arizona_i2c_remove(struct i2c_client *i2c)
 {
 	struct arizona *arizona = dev_get_drvdata(&i2c->dev);
+
 	arizona_dev_exit(arizona);
+
 	return 0;
 }
 
-- 
cgit v0.10.2


From ae487ae2ac56ebe02e12fed38047ed41e682ad9e Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 13:57:44 +0000
Subject: mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings

WARNING: Possible unnecessary 'out of memory' message
+               if (!pdata) {
+                       dev_err(&client->dev, "Failed to allocate pdata\n");

WARNING: Possible unnecessary 'out of memory' message
+       if (!as3711) {
+               dev_err(&client->dev, "Memory allocation failed\n");

WARNING: line over 80 characters
+               dev_err(&client->dev, "regmap initialization failed: %d\n", ret);

WARNING: line over 80 characters
+       /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator;

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator);

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight;

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight);

total: 0 errors, 8 warnings, 236 lines checked

Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
index d001f7e2..94d67a6 100644
--- a/drivers/mfd/as3711.c
+++ b/drivers/mfd/as3711.c
@@ -136,17 +136,13 @@ static int as3711_i2c_probe(struct i2c_client *client,
 	} else {
 		pdata = devm_kzalloc(&client->dev,
 				     sizeof(*pdata), GFP_KERNEL);
-		if (!pdata) {
-			dev_err(&client->dev, "Failed to allocate pdata\n");
+		if (!pdata)
 			return -ENOMEM;
-		}
 	}
 
 	as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
-	if (!as3711) {
-		dev_err(&client->dev, "Memory allocation failed\n");
+	if (!as3711)
 		return -ENOMEM;
-	}
 
 	as3711->dev = &client->dev;
 	i2c_set_clientdata(client, as3711);
@@ -157,7 +153,8 @@ static int as3711_i2c_probe(struct i2c_client *client,
 	as3711->regmap = devm_regmap_init_i2c(client, &as3711_regmap_config);
 	if (IS_ERR(as3711->regmap)) {
 		ret = PTR_ERR(as3711->regmap);
-		dev_err(&client->dev, "regmap initialization failed: %d\n", ret);
+		dev_err(&client->dev,
+			"regmap initialization failed: %d\n", ret);
 		return ret;
 	}
 
@@ -172,12 +169,19 @@ static int as3711_i2c_probe(struct i2c_client *client,
 		return -ENODEV;
 	dev_info(as3711->dev, "AS3711 detected: %x:%x\n", id1, id2);
 
-	/* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */
+	/*
+	 * We can reuse as3711_subdevs[],
+	 * it will be copied in mfd_add_devices()
+	 */
 	if (pdata) {
-		as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator;
-		as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator);
-		as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight;
-		as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight);
+		as3711_subdevs[AS3711_REGULATOR].platform_data =
+			&pdata->regulator;
+		as3711_subdevs[AS3711_REGULATOR].pdata_size =
+			sizeof(pdata->regulator);
+		as3711_subdevs[AS3711_BACKLIGHT].platform_data =
+			&pdata->backlight;
+		as3711_subdevs[AS3711_BACKLIGHT].pdata_size =
+			sizeof(pdata->backlight);
 	} else {
 		as3711_subdevs[AS3711_REGULATOR].platform_data = NULL;
 		as3711_subdevs[AS3711_REGULATOR].pdata_size = 0;
-- 
cgit v0.10.2


From d43c4290ff5c37e5ba8702301ad51786a37979ed Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 14:11:23 +0000
Subject: mfd: asic3: Fix a plethora of Checkpatch errors and warnings

ERROR: Macros with complex values should be enclosed in parentheses
+#define INIT_CDEX(_name, _rate)        \
+       [ASIC3_CLOCK_##_name] = {               \
+               .cdex = CLOCK_CDEX_##_name,     \
+               .rate = _rate,                  \
+       }

WARNING: line over 80 characters
+                                                           ASIC3_GPIO_INT_STATUS);

WARNING: void function return statements are not generally useful
+       return;
+}

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);
WARNING: line over 80 characters
+               asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then p
r_err(...  to printk(KERN_ERR ...
+               printk(KERN_ERR "kzalloc failed\n");

WARNING: Possible unnecessary 'out of memory' message
+       if (asic == NULL) {
+               printk(KERN_ERR "kzalloc failed\n");

WARNING: Missing a blank line after declarations
+       int retval = 0;
+       retval = platform_driver_probe(&asic3_device_driver, asic3_probe);

total: 1 errors, 13 warnings, 1081 lines checked

Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 73812ee..4dca6bc 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -167,7 +167,6 @@ static void asic3_irq_demux(struct irq_desc *desc)
 
 				base = ASIC3_GPIO_A_BASE
 				       + bank * ASIC3_GPIO_BASE_INCR;
-
 				spin_lock_irqsave(&asic->lock, flags);
 				istat = asic3_read_register(asic,
 							    base +
@@ -537,8 +536,6 @@ static void asic3_gpio_set(struct gpio_chip *chip,
 	asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg);
 
 	spin_unlock_irqrestore(&asic->lock, flags);
-
-	return;
 }
 
 static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
@@ -666,18 +663,18 @@ static int ds1wm_enable(struct platform_device *pdev)
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
-	msleep(1);
+	usleep_range(1000, 5000);
 
 	/* Reset and enable DS1WM */
 	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
 			   ASIC3_EXTCF_OWM_RESET, 1);
-	msleep(1);
+	usleep_range(1000, 5000);
 	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
 			   ASIC3_EXTCF_OWM_RESET, 0);
-	msleep(1);
+	usleep_range(1000, 5000);
 	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
 			   ASIC3_EXTCF_OWM_EN, 1);
-	msleep(1);
+	usleep_range(1000, 5000);
 
 	return 0;
 }
@@ -758,7 +755,7 @@ static int asic3_mmc_enable(struct platform_device *pdev)
 	 * when HCLK is stopped.
 	 */
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
-	msleep(1);
+	usleep_range(1000, 5000);
 
 	/* HCLK 24.576 MHz, BCLK 12.288 MHz: */
 	asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
@@ -766,7 +763,7 @@ static int asic3_mmc_enable(struct platform_device *pdev)
 
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
-	msleep(1);
+	usleep_range(1000, 5000);
 
 	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
 			   ASIC3_EXTCF_SD_MEM_ENABLE, 1);
@@ -842,7 +839,7 @@ static int asic3_leds_suspend(struct platform_device *pdev)
 	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
 
 	while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0)
-		msleep(1);
+		usleep_range(1000, 5000);
 
 	asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
 
@@ -901,8 +898,8 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
 
 	/* MMC */
 	if (mem_sdio) {
-		asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +
-				 mem_sdio->start,
+		asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >>
+					  asic->bus_shift) + mem_sdio->start,
 				 ASIC3_SD_CONFIG_SIZE >> asic->bus_shift);
 		if (!asic->tmio_cnf) {
 			ret = -ENOMEM;
@@ -963,10 +960,8 @@ static int __init asic3_probe(struct platform_device *pdev)
 
 	asic = devm_kzalloc(&pdev->dev,
 			    sizeof(struct asic3), GFP_KERNEL);
-	if (asic == NULL) {
-		printk(KERN_ERR "kzalloc failed\n");
+	if (!asic)
 		return -ENOMEM;
-	}
 
 	spin_lock_init(&asic->lock);
 	platform_set_drvdata(pdev, asic);
@@ -1075,7 +1070,9 @@ static struct platform_driver asic3_device_driver = {
 static int __init asic3_init(void)
 {
 	int retval = 0;
+
 	retval = platform_driver_probe(&asic3_device_driver, asic3_probe);
+
 	return retval;
 }
 
-- 
cgit v0.10.2


From 2756db6c63662a179d1a59be2c0fa260dbd1b2fc Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 16:02:48 +0000
Subject: mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue.

ERROR: code indent should use tabs where possible
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

WARNING: please, no space before tabs
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

WARNING: please, no spaces at the start of a line
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

total: 1 errors, 2 warnings, 366 lines checked

Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
index 56a4664..9f70de1 100644
--- a/drivers/mfd/cros_ec_i2c.c
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -292,7 +292,7 @@ static int cros_ec_i2c_probe(struct i2c_client *client,
 	struct cros_ec_device *ec_dev = NULL;
 	int err;
 
- 	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
 	if (!ec_dev)
 		return -ENOMEM;
 
-- 
cgit v0.10.2


From 8827a642a4635d5e696037f9213cb1d015d4cec3 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 16:42:45 +0000
Subject: mfd: cros_ec_spi: Repair comparison ordering issue

WARNING: Comparisons should place the constant on the right side of the test
+       BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);

WARNING: Comparisons should place the constant on the right side of the test
+       BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);

total: 0 errors, 2 warnings, 731 lines checked

Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index d6af52d..ebe9b94 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -175,7 +175,7 @@ static int cros_ec_spi_receive_packet(struct cros_ec_device *ec_dev,
 	unsigned long deadline;
 	int todo;
 
-	BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);
+	BUG_ON(ec_dev->din_size < EC_MSG_PREAMBLE_COUNT);
 
 	/* Receive data until we see the header byte */
 	deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
@@ -283,7 +283,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
 	unsigned long deadline;
 	int todo;
 
-	BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);
+	BUG_ON(ec_dev->din_size < EC_MSG_PREAMBLE_COUNT);
 
 	/* Receive data until we see the header byte */
 	deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
-- 
cgit v0.10.2


From 740c19895917d9a25abea65fb20fb13af764ac09 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 16:44:58 +0000
Subject: mfd: cs5535-mfd: Add missing line spacing and make local array static

WARNING: Missing a blank line after declarations
+       struct resource *res;
+       res = platform_get_resource(pdev, IORESOURCE_IO, 0);

WARNING: char * array declaration might be better as static const
+       const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" };

total: 0 errors, 2 warnings, 192 lines checked

Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c
index be91cb5..f9d277f 100644
--- a/drivers/mfd/cs5535-mfd.c
+++ b/drivers/mfd/cs5535-mfd.c
@@ -60,6 +60,7 @@ static int cs5535_mfd_res_enable(struct platform_device *pdev)
 static int cs5535_mfd_res_disable(struct platform_device *pdev)
 {
 	struct resource *res;
+
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "can't fetch device resource info\n");
@@ -114,7 +115,10 @@ static struct mfd_cell cs5535_mfd_cells[] = {
 #ifdef CONFIG_OLPC
 static void cs5535_clone_olpc_cells(void)
 {
-	const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" };
+	static const char *acpi_clones[] = {
+		"olpc-xo1-pm-acpi",
+		"olpc-xo1-sci-acpi"
+	};
 
 	if (!machine_is_olpc())
 		return;
-- 
cgit v0.10.2


From 8b2775787f2ef0959518206b9df0e6a83ef11496 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 16:47:00 +0000
Subject: mfd: da903x: Fix white space and split string issues

While we're at it, let's also match the MODULE_LICENSE with the header.

WARNING: please, no space before tabs
+ * ^IMike Rapoport <mike@compulab.co.il>$

WARNING: please, no space before tabs
+ * ^IEric Miao <eric.miao@marvell.com>$

WARNING: quoted string split across lines
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+             "Mike Rapoport <mike@compulab.co.il>");

total: 0 errors, 3 warnings, 574 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index f6a0459..09f3675 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -2,10 +2,10 @@
  * Base driver for Dialog Semiconductor DA9030/DA9034
  *
  * Copyright (C) 2008 Compulab, Ltd.
- * 	Mike Rapoport <mike@compulab.co.il>
+ *	Mike Rapoport <mike@compulab.co.il>
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
- * 	Eric Miao <eric.miao@marvell.com>
+ *	Eric Miao <eric.miao@marvell.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -565,6 +565,6 @@ static void __exit da903x_exit(void)
 module_exit(da903x_exit);
 
 MODULE_DESCRIPTION("PMIC Driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
-	      "Mike Rapoport <mike@compulab.co.il>");
-MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL v2");
-- 
cgit v0.10.2


From 5b7b2ac1529429c22aacc7cbd6704d6c267e8a9c Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 16:51:11 +0000
Subject: mfd: da9052-i2c: Fix tabbing/whitespace issue

WARNING: suspect code indent for conditional statements (8, 24)
+       if (!i2c_safe_reg(reg))
+                       return regmap_read(da9052->regmap,

total: 0 errors, 1 warnings, 226 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c
index 2697ffb..578e881 100644
--- a/drivers/mfd/da9052-i2c.c
+++ b/drivers/mfd/da9052-i2c.c
@@ -70,7 +70,7 @@ static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
 	case DA9053_BA:
 	case DA9053_BB:
 		/* A dummy read to a safe register address. */
-	if (!i2c_safe_reg(reg))
+		if (!i2c_safe_reg(reg))
 			return regmap_read(da9052->regmap,
 					   DA9052_PARK_REGISTER,
 					   &val);
-- 
cgit v0.10.2


From 997eea4691c5475765566dbaeb38bb60700c54bb Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 16:53:04 +0000
Subject: mfd: da9052-irq: Fix trivial 'space before comma' error

ERROR: space prohibited before that ',' (ctx:WxW)
+       da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052);

total: 1 errors, 0 warnings, 290 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/da9052-irq.c b/drivers/mfd/da9052-irq.c
index f4cb461..cd4ca84 100644
--- a/drivers/mfd/da9052-irq.c
+++ b/drivers/mfd/da9052-irq.c
@@ -283,7 +283,7 @@ regmap_err:
 
 int da9052_irq_exit(struct da9052 *da9052)
 {
-	da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052);
+	da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM, da9052);
 	regmap_del_irq_chip(da9052->chip_irq, da9052->irq_data);
 
 	return 0;
-- 
cgit v0.10.2


From 9fb41166076b197318807a5f1829911450b43218 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 28 Oct 2015 16:54:29 +0000
Subject: mfd: davinci_voicecodec: Remove pointless 'out of memory' error
 message

WARNING: Possible unnecessary 'out of memory' message
+       if (!davinci_vc) {
+               dev_dbg(&pdev->dev,

total: 0 errors, 1 warnings, 154 lines checked

Signed-off-by: Lee Jones <lee.jones@linaro.org>

diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c
index 9bbc642..dff2f19 100644
--- a/drivers/mfd/davinci_voicecodec.c
+++ b/drivers/mfd/davinci_voicecodec.c
@@ -47,11 +47,8 @@ static int __init davinci_vc_probe(struct platform_device *pdev)
 
 	davinci_vc = devm_kzalloc(&pdev->dev,
 				  sizeof(struct davinci_vc), GFP_KERNEL);
-	if (!davinci_vc) {
-		dev_dbg(&pdev->dev,
-			    "could not allocate memory for private data\n");
+	if (!davinci_vc)
 		return -ENOMEM;
-	}
 
 	davinci_vc->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(davinci_vc->clk)) {
-- 
cgit v0.10.2