From 5d7e23a79444385d03717dc19cc58dd2d5883052 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 1 Mar 2016 17:14:22 -0800 Subject: ARM: dts: Add clocks for dm814x ADPLL These use the standard clock bindings and now we can make some of the fixed clocks into real clocks. Note that the clock output names may become optional as we probably want to eventually use descriptive names, or use just dynamically generated names as suggested by Tero. Acked-by: Tero Kristo Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index 2600158..60e9b33 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -4,6 +4,157 @@ * published by the Free Software Foundation. */ +&pllss { + /* + * See TRM "2.6.10 Connected outputso DPLLS" and + * "2.6.11 Connected Outputs of DPLLJ". Only clkout is + * connected except for hdmi and usb. + */ + adpll_mpu_ck: adpll@40 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-s-clock"; + reg = <0x40 0x40>; + clocks = <&devosc_ck &devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow", "clkinphif"; + clock-output-names = "481c5040.adpll.dcoclkldo", + "481c5040.adpll.clkout", + "481c5040.adpll.clkoutx2", + "481c5040.adpll.clkouthif"; + }; + + adpll_dsp_ck: adpll@80 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x80 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5080.adpll.dcoclkldo", + "481c5080.adpll.clkout", + "481c5080.adpll.clkoutldo"; + }; + + adpll_sgx_ck: adpll@b0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0xb0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c50b0.adpll.dcoclkldo", + "481c50b0.adpll.clkout", + "481c50b0.adpll.clkoutldo"; + }; + + adpll_hdvic_ck: adpll@e0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0xe0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c50e0.adpll.dcoclkldo", + "481c50e0.adpll.clkout", + "481c50e0.adpll.clkoutldo"; + }; + + adpll_l3_ck: adpll@110 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x110 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5110.adpll.dcoclkldo", + "481c5110.adpll.clkout", + "481c5110.adpll.clkoutldo"; + }; + + adpll_isp_ck: adpll@140 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x140 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5140.adpll.dcoclkldo", + "481c5140.adpll.clkout", + "481c5140.adpll.clkoutldo"; + }; + + adpll_dss_ck: adpll@170 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x170 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5170.adpll.dcoclkldo", + "481c5170.adpll.clkout", + "481c5170.adpll.clkoutldo"; + }; + + adpll_video0_ck: adpll@1a0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x1a0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c51a0.adpll.dcoclkldo", + "481c51a0.adpll.clkout", + "481c51a0.adpll.clkoutldo"; + }; + + adpll_video1_ck: adpll@1d0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x1d0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c51d0.adpll.dcoclkldo", + "481c51d0.adpll.clkout", + "481c51d0.adpll.clkoutldo"; + }; + + adpll_hdmi_ck: adpll@200 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x200 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5200.adpll.dcoclkldo", + "481c5200.adpll.clkout", + "481c5200.adpll.clkoutldo"; + }; + + adpll_audio_ck: adpll@230 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x230 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5230.adpll.dcoclkldo", + "481c5230.adpll.clkout", + "481c5230.adpll.clkoutldo"; + }; + + adpll_usb_ck: adpll@260 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x260 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5260.adpll.dcoclkldo", + "481c5260.adpll.clkout", + "481c5260.adpll.clkoutldo"; + }; + + adpll_ddr_ck: adpll@290 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x290 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5290.adpll.dcoclkldo", + "481c5290.adpll.clkout", + "481c5290.adpll.clkoutldo"; + }; +}; + &pllss_clocks { timer1_fck: timer1_fck { #clock-cells = <0>; @@ -23,6 +174,24 @@ reg = <0x2e0>; }; + /* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */ + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&adpll_video0_ck 1 + &adpll_video1_ck 1 + &adpll_audio_ck 1>; + ti,bit-shift = <1>; + reg = <0x2e8>; + }; + + /* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */ + cpsw_125mhz_gclk: cpsw_125mhz_gclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + }; + sysclk18_ck: sysclk18_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -79,37 +248,6 @@ compatible = "fixed-clock"; clock-frequency = <1000000000>; }; - - sysclk4_ck: sysclk4_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <222000000>; - }; - - sysclk6_ck: sysclk6_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - - sysclk10_ck: sysclk10_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <48000000>; - }; - - cpsw_125mhz_gclk: cpsw_125mhz_gclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <125000000>; - }; - - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <250000000>; - }; - }; &prcm_clocks { @@ -138,6 +276,49 @@ clock-div = <78125>; }; + /* L4_HS 220 MHz*/ + sysclk4_ck: sysclk4_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + }; + + /* L4_FWCFG */ + sysclk5_ck: sysclk5_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <2>; + }; + + /* L4_LS 110 MHz */ + sysclk6_ck: sysclk6_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <2>; + }; + + sysclk8_ck: sysclk8_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_usb_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + }; + + sysclk10_ck: sysclk10_ck { + compatible = "ti,divider-clock"; + reg = <0x324>; + ti,max-div = <7>; + #clock-cells = <0>; + clocks = <&adpll_usb_ck 1>; + }; + aud_clkin0_ck: aud_clkin0_ck { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi index 6f98dc8..0e49741 100644 --- a/arch/arm/boot/dts/dra62x-clocks.dtsi +++ b/arch/arm/boot/dts/dra62x-clocks.dtsi @@ -6,6 +6,32 @@ #include "dm814x-clocks.dtsi" +/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */ +&adpll_hdvic_ck { + status = "disabled"; +}; + +&adpll_l3_ck { + status = "disabled"; +}; + +&adpll_dss_ck { + status = "disabled"; +}; + +/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */ +&sysclk4_ck { + clocks = <&adpll_isp_ck 1>; +}; + +&sysclk5_ck { + clocks = <&adpll_isp_ck 1>; +}; + +&sysclk6_ck { + clocks = <&adpll_isp_ck 1>; +}; + /* * Compared to dm814x, dra62x has different shifts and more mux options. * Please add the extra options for ysclk_14 and 16 if really needed. -- cgit v0.10.2 From dd5dc001581a7cf6f563e188c302caae1be998c2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 14 Mar 2016 15:49:54 +0100 Subject: ASoC: cs35l32: avoid uninitialized variable access gcc warns about the possibilty of accessing a property read from devicetree in cs35l32_i2c_probe() when it has not been initialized because CONFIG_OF is disabled: sound/soc/codecs/cs35l32.c: In function 'cs35l32_i2c_probe': sound/soc/codecs/cs35l32.c:278:2: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] The code is actually correct because it checks the dev->of_node variable first and we know this is NULL here when CONFIG_OF is disabled, but Russell King noticed that it's broken when we probe the device using DT, and the properties are absent. The code already has some checking for incorrect values, and I keep that checking unchanged here, but add an additional check for an error returned by the property accessor functions that now gets handled the same way as incorrect data in the properties. Signed-off-by: Arnd Bergmann Acked-by: Brian Austin Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs35l32.c b/sound/soc/codecs/cs35l32.c index 44c30fe..287d137 100644 --- a/sound/soc/codecs/cs35l32.c +++ b/sound/soc/codecs/cs35l32.c @@ -274,7 +274,9 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client, if (of_property_read_u32(np, "cirrus,sdout-share", &val) >= 0) pdata->sdout_share = val; - of_property_read_u32(np, "cirrus,boost-manager", &val); + if (of_property_read_u32(np, "cirrus,boost-manager", &val)) + val = -1u; + switch (val) { case CS35L32_BOOST_MGR_AUTO: case CS35L32_BOOST_MGR_AUTO_AUDIO: @@ -282,13 +284,15 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client, case CS35L32_BOOST_MGR_FIXED: pdata->boost_mng = val; break; + case -1u: default: dev_err(&i2c_client->dev, "Wrong cirrus,boost-manager DT value %d\n", val); pdata->boost_mng = CS35L32_BOOST_MGR_BYPASS; } - of_property_read_u32(np, "cirrus,sdout-datacfg", &val); + if (of_property_read_u32(np, "cirrus,sdout-datacfg", &val)) + val = -1u; switch (val) { case CS35L32_DATA_CFG_LR_VP: case CS35L32_DATA_CFG_LR_STAT: @@ -296,13 +300,15 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client, case CS35L32_DATA_CFG_LR_VPSTAT: pdata->sdout_datacfg = val; break; + case -1u: default: dev_err(&i2c_client->dev, "Wrong cirrus,sdout-datacfg DT value %d\n", val); pdata->sdout_datacfg = CS35L32_DATA_CFG_LR; } - of_property_read_u32(np, "cirrus,battery-threshold", &val); + if (of_property_read_u32(np, "cirrus,battery-threshold", &val)) + val = -1u; switch (val) { case CS35L32_BATT_THRESH_3_1V: case CS35L32_BATT_THRESH_3_2V: @@ -310,13 +316,15 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client, case CS35L32_BATT_THRESH_3_4V: pdata->batt_thresh = val; break; + case -1u: default: dev_err(&i2c_client->dev, "Wrong cirrus,battery-threshold DT value %d\n", val); pdata->batt_thresh = CS35L32_BATT_THRESH_3_3V; } - of_property_read_u32(np, "cirrus,battery-recovery", &val); + if (of_property_read_u32(np, "cirrus,battery-recovery", &val)) + val = -1u; switch (val) { case CS35L32_BATT_RECOV_3_1V: case CS35L32_BATT_RECOV_3_2V: @@ -326,6 +334,7 @@ static int cs35l32_handle_of_data(struct i2c_client *i2c_client, case CS35L32_BATT_RECOV_3_6V: pdata->batt_recov = val; break; + case -1u: default: dev_err(&i2c_client->dev, "Wrong cirrus,battery-recovery DT value %d\n", val); -- cgit v0.10.2 From af139d5592bc812e7a1997727172ddba3e6be968 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 15 Mar 2016 22:42:50 +0100 Subject: ASoC: rt5616: add I2C dependency The rt5616 codec registers itself as an i2c driver, but can be enabled even when i2c is turned off, which leads to a build error: codecs/rt5616.c:1419:1: error: data definition has no type or storage class [-Werror] module_i2c_driver(rt5616_i2c_driver); This adds an explicit Kconfig dependency, like the other codec drivers. Signed-off-by: Arnd Bergmann Fixes: 288bc356a881 ("ASoC: rt5616: allow to build with CONFIG_SND_SOC_RT5616") Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 649e92a..7ef3a0c 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -629,6 +629,7 @@ config SND_SOC_RT5514 config SND_SOC_RT5616 tristate "Realtek RT5616 CODEC" + depends on I2C config SND_SOC_RT5631 tristate "Realtek ALC5631/RT5631 CODEC" -- cgit v0.10.2 From 4a6c5e6a8d29e4d33858227db9179e91aa8a7407 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 15 Mar 2016 16:39:23 +0530 Subject: ALSA: hda: use list macro for parsing on cleanup It is always better to use list_for_each_entry_safe() while doing cleanup. So use this instead of open coding this in list in snd_hdac_stream_free_all() Signed-off-by: Jeeja KP Acked-by: Takashi Iwai Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/hda/ext/hdac_ext_stream.c b/sound/hda/ext/hdac_ext_stream.c index 023cc4c..626f3bb 100644 --- a/sound/hda/ext/hdac_ext_stream.c +++ b/sound/hda/ext/hdac_ext_stream.c @@ -104,12 +104,11 @@ EXPORT_SYMBOL_GPL(snd_hdac_ext_stream_init_all); */ void snd_hdac_stream_free_all(struct hdac_ext_bus *ebus) { - struct hdac_stream *s; + struct hdac_stream *s, *_s; struct hdac_ext_stream *stream; struct hdac_bus *bus = ebus_to_hbus(ebus); - while (!list_empty(&bus->stream_list)) { - s = list_first_entry(&bus->stream_list, struct hdac_stream, list); + list_for_each_entry_safe(s, _s, &bus->stream_list, list) { stream = stream_to_hdac_ext_stream(s); snd_hdac_ext_stream_decouple(ebus, stream, false); list_del(&s->list); -- cgit v0.10.2 From 7373f481dc4098a844a756201e98341bc56baaa2 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 15 Mar 2016 16:39:24 +0530 Subject: ASoC: Intel: Skylake: free codec objects on removal On driver removal we should ask the core to remove the device objects as well, so invoke snd_hdac_ext_bus_device_remove() in remove. Signed-off-by: Jeeja KP Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index ab5e25a..292d51d 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -725,6 +725,10 @@ static void skl_remove(struct pci_dev *pci) if (pci_dev_run_wake(pci)) pm_runtime_get_noresume(&pci->dev); pci_dev_put(pci); + + /* codec removal, invoke bus_device_remove */ + snd_hdac_ext_bus_device_remove(ebus); + skl_platform_unregister(&pci->dev); skl_free_dsp(skl); skl_machine_device_unregister(skl); -- cgit v0.10.2 From 3f7f8489e25b180cf8de8a3ae3896b3f18fc4aa5 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 15 Mar 2016 16:39:25 +0530 Subject: ASoC: Intel: Skylake: Freeup properly on skl_dsp_free We are supposed to freeup the Code loader DMA allocation and ensure all interrupts are disabled before we disable dsp cores. So invoke these to ensure DSP shuts down properly. Signed-off-by: Jeeja KP Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl-sst-dsp.c b/sound/soc/intel/skylake/skl-sst-dsp.c index a5267e8..2962ef2 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.c +++ b/sound/soc/intel/skylake/skl-sst-dsp.c @@ -336,6 +336,11 @@ void skl_dsp_free(struct sst_dsp *dsp) skl_ipc_int_disable(dsp); free_irq(dsp->irq, dsp); + dsp->cl_dev.ops.cl_cleanup_controller(dsp); + skl_cldma_int_disable(dsp); + skl_ipc_op_int_disable(dsp); + skl_ipc_int_disable(dsp); + skl_dsp_disable_core(dsp); } EXPORT_SYMBOL_GPL(skl_dsp_free); -- cgit v0.10.2 From 077411e5eb8872736fdc5f3e7277719160918dde Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 15 Mar 2016 16:39:26 +0530 Subject: ASoC: Intel: Skylake: Unmap the address last In Skylake destructor we unmap the hardware address and then free links and streams. The stream free accesses hardware to write to registers and predictably causes oops. So change the order and unmap last in destructor. Signed-off-by: Jeeja KP Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 292d51d..6e916c3 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -316,12 +316,13 @@ static int skl_free(struct hdac_ext_bus *ebus) if (bus->irq >= 0) free_irq(bus->irq, (void *)bus); - if (bus->remap_addr) - iounmap(bus->remap_addr); - snd_hdac_bus_free_stream_pages(bus); snd_hdac_stream_free_all(ebus); snd_hdac_link_free_all(ebus); + + if (bus->remap_addr) + iounmap(bus->remap_addr); + pci_release_regions(skl->pci); pci_disable_device(skl->pci); -- cgit v0.10.2 From 5b2fe89856b2d0faaaea9e4b4b2c4920de7a600c Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 15 Mar 2016 16:39:27 +0530 Subject: ASoC: Intel: Skylake: Call i915 exit last The Skylake driver uses i915 component APIs to talk to display. On remove we should free up by invoking snd_hdac_i915_exit() but that should be last thing in remove routine, so move it to last in skl_free() Signed-off-by: Jeeja KP Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 6e916c3..72971dc 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -328,6 +328,8 @@ static int skl_free(struct hdac_ext_bus *ebus) snd_hdac_ext_bus_exit(ebus); + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) + snd_hdac_i915_exit(&ebus->bus); return 0; } @@ -720,9 +722,6 @@ static void skl_remove(struct pci_dev *pci) if (skl->tplg) release_firmware(skl->tplg); - if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) - snd_hdac_i915_exit(&ebus->bus); - if (pci_dev_run_wake(pci)) pm_runtime_get_noresume(&pci->dev); pci_dev_put(pci); -- cgit v0.10.2 From 36e7972c0d3f8819a5d9335c36c5dcd168cd2b72 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 16 Mar 2016 21:51:31 +0530 Subject: ASoC: Intel: Skylake: remove call to pci_dev_put The PCI bus takes pci_dev_get() and pci_dev_put() is also there. So no need for drivers to invoke these. In SKL driver we were calling pci_dev_put() only which is not right, so remove this Signed-off-by: Jeeja KP Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 72971dc..07d9bc1 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -724,7 +724,6 @@ static void skl_remove(struct pci_dev *pci) if (pci_dev_run_wake(pci)) pm_runtime_get_noresume(&pci->dev); - pci_dev_put(pci); /* codec removal, invoke bus_device_remove */ snd_hdac_ext_bus_device_remove(ebus); -- cgit v0.10.2 From 653aa4645244042826f105aab1be3d01b3d493ca Mon Sep 17 00:00:00 2001 From: Sugar Zhang Date: Fri, 18 Mar 2016 14:54:22 +0800 Subject: ASoC: rt5640: Correct the digital interface data select this patch corrects the interface adc/dac control register definition according to datasheet. Signed-off-by: Sugar Zhang Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index e8b5ba0..09e8988 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -359,7 +359,7 @@ static const DECLARE_TLV_DB_RANGE(bst_tlv, /* Interface data select */ static const char * const rt5640_data_select[] = { - "Normal", "left copy to right", "right copy to left", "Swap"}; + "Normal", "Swap", "left copy to right", "right copy to left"}; static SOC_ENUM_SINGLE_DECL(rt5640_if1_dac_enum, RT5640_DIG_INF_DATA, RT5640_IF1_DAC_SEL_SFT, rt5640_data_select); diff --git a/sound/soc/codecs/rt5640.h b/sound/soc/codecs/rt5640.h index 1761c3a9..58b664b 100644 --- a/sound/soc/codecs/rt5640.h +++ b/sound/soc/codecs/rt5640.h @@ -443,39 +443,39 @@ #define RT5640_IF1_DAC_SEL_MASK (0x3 << 14) #define RT5640_IF1_DAC_SEL_SFT 14 #define RT5640_IF1_DAC_SEL_NOR (0x0 << 14) -#define RT5640_IF1_DAC_SEL_L2R (0x1 << 14) -#define RT5640_IF1_DAC_SEL_R2L (0x2 << 14) -#define RT5640_IF1_DAC_SEL_SWAP (0x3 << 14) +#define RT5640_IF1_DAC_SEL_SWAP (0x1 << 14) +#define RT5640_IF1_DAC_SEL_L2R (0x2 << 14) +#define RT5640_IF1_DAC_SEL_R2L (0x3 << 14) #define RT5640_IF1_ADC_SEL_MASK (0x3 << 12) #define RT5640_IF1_ADC_SEL_SFT 12 #define RT5640_IF1_ADC_SEL_NOR (0x0 << 12) -#define RT5640_IF1_ADC_SEL_L2R (0x1 << 12) -#define RT5640_IF1_ADC_SEL_R2L (0x2 << 12) -#define RT5640_IF1_ADC_SEL_SWAP (0x3 << 12) +#define RT5640_IF1_ADC_SEL_SWAP (0x1 << 12) +#define RT5640_IF1_ADC_SEL_L2R (0x2 << 12) +#define RT5640_IF1_ADC_SEL_R2L (0x3 << 12) #define RT5640_IF2_DAC_SEL_MASK (0x3 << 10) #define RT5640_IF2_DAC_SEL_SFT 10 #define RT5640_IF2_DAC_SEL_NOR (0x0 << 10) -#define RT5640_IF2_DAC_SEL_L2R (0x1 << 10) -#define RT5640_IF2_DAC_SEL_R2L (0x2 << 10) -#define RT5640_IF2_DAC_SEL_SWAP (0x3 << 10) +#define RT5640_IF2_DAC_SEL_SWAP (0x1 << 10) +#define RT5640_IF2_DAC_SEL_L2R (0x2 << 10) +#define RT5640_IF2_DAC_SEL_R2L (0x3 << 10) #define RT5640_IF2_ADC_SEL_MASK (0x3 << 8) #define RT5640_IF2_ADC_SEL_SFT 8 #define RT5640_IF2_ADC_SEL_NOR (0x0 << 8) -#define RT5640_IF2_ADC_SEL_L2R (0x1 << 8) -#define RT5640_IF2_ADC_SEL_R2L (0x2 << 8) -#define RT5640_IF2_ADC_SEL_SWAP (0x3 << 8) +#define RT5640_IF2_ADC_SEL_SWAP (0x1 << 8) +#define RT5640_IF2_ADC_SEL_L2R (0x2 << 8) +#define RT5640_IF2_ADC_SEL_R2L (0x3 << 8) #define RT5640_IF3_DAC_SEL_MASK (0x3 << 6) #define RT5640_IF3_DAC_SEL_SFT 6 #define RT5640_IF3_DAC_SEL_NOR (0x0 << 6) -#define RT5640_IF3_DAC_SEL_L2R (0x1 << 6) -#define RT5640_IF3_DAC_SEL_R2L (0x2 << 6) -#define RT5640_IF3_DAC_SEL_SWAP (0x3 << 6) +#define RT5640_IF3_DAC_SEL_SWAP (0x1 << 6) +#define RT5640_IF3_DAC_SEL_L2R (0x2 << 6) +#define RT5640_IF3_DAC_SEL_R2L (0x3 << 6) #define RT5640_IF3_ADC_SEL_MASK (0x3 << 4) #define RT5640_IF3_ADC_SEL_SFT 4 #define RT5640_IF3_ADC_SEL_NOR (0x0 << 4) -#define RT5640_IF3_ADC_SEL_L2R (0x1 << 4) -#define RT5640_IF3_ADC_SEL_R2L (0x2 << 4) -#define RT5640_IF3_ADC_SEL_SWAP (0x3 << 4) +#define RT5640_IF3_ADC_SEL_SWAP (0x1 << 4) +#define RT5640_IF3_ADC_SEL_L2R (0x2 << 4) +#define RT5640_IF3_ADC_SEL_R2L (0x3 << 4) /* REC Left Mixer Control 1 (0x3b) */ #define RT5640_G_HP_L_RM_L_MASK (0x7 << 13) -- cgit v0.10.2 From 47325078f2a3e543150e7df967e45756b2fff7ec Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 18 Mar 2016 12:04:23 +0000 Subject: ASoC: dapm: Make sure we have a card when displaying component widgets The dummy component is reused for all cards so we special case and don't bind it to any of them. This means that code like that displaying the component widgets that tries to look at the card will crash. In the future we will fix this by ensuring that the dummy component looks like other components but that is invasive and so not suitable for a fix. Instead add a special case check here. Reported-by: Harry Pan Suggested-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 801ae1a..c446485 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -2188,6 +2188,13 @@ static ssize_t dapm_widget_show_component(struct snd_soc_component *cmpnt, int count = 0; char *state = "not set"; + /* card won't be set for the dummy component, as a spot fix + * we're checking for that case specifically here but in future + * we will ensure that the dummy component looks like others. + */ + if (!cmpnt->card) + return 0; + list_for_each_entry(w, &cmpnt->card->widgets, list) { if (w->dapm != dapm) continue; -- cgit v0.10.2 From c3efb42b207e22991dee86ca15861ede11a419fc Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 18 Mar 2016 20:10:23 +0530 Subject: ASoC: Intel: Skylake: Fix kbuild dependency The Skylake driver selects SND_HDA_I915 which causes kbuild to spew warning: warning: (SND_SOC_INTEL_SKYLAKE) selects SND_HDA_I915 which has unmet direct dependencies (SOUND && !M68K && !UML && SND && DRM_I915 && SND_HDA_CORE) The SND_HDA_I915 should not be selected so drop that. Reported-by: Takashi Iwai Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index b3e6c23..1120f4f 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -163,7 +163,6 @@ config SND_SOC_INTEL_SKYLAKE tristate select SND_HDA_EXT_CORE select SND_SOC_TOPOLOGY - select SND_HDA_I915 select SND_SOC_INTEL_SST config SND_SOC_INTEL_SKL_RT286_MACH -- cgit v0.10.2 From 9fc515bc9e735c10cd327f05c20f5ef69474188d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 10 Mar 2016 13:07:17 +0200 Subject: iwlwifi: pcie: lower the debug level for RSA semaphore access IWL_INFO is not an error but still printed by default. "can't access the RSA semaphore it is write protected" seems worrisome but it is not really a problem. CC: [4.1+] Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index eb39c7e..b2b7935 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -732,8 +732,8 @@ static int iwl_pcie_rsa_race_bug_wa(struct iwl_trans *trans) */ val = iwl_read_prph(trans, PREG_AUX_BUS_WPROT_0); if (val & (BIT(1) | BIT(17))) { - IWL_INFO(trans, - "can't access the RSA semaphore it is write protected\n"); + IWL_DEBUG_INFO(trans, + "can't access the RSA semaphore it is write protected\n"); return 0; } -- cgit v0.10.2 From 7fdf9663261cc77a516396fec82cee8a8ea07e76 Mon Sep 17 00:00:00 2001 From: Matti Gottlieb Date: Tue, 15 Mar 2016 13:46:47 +0200 Subject: iwlwifi: mvm: fix memory leak in paging Currently paging download buffer is freed during the the unloading of the opmode which happens when the driver is unloaded. This causes a memory leak since the paging download buffer is allocated every time we enable the interface, so the download buffer can be allocated many times, but only be freed once. Free paging download buffer during disabling of the interface. CC: stable@vger.kernel.org [4.3+] Signed-off-by: Matti Gottlieb Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 76e649c..a50f4df 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -1147,6 +1147,8 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm) /* the fw is stopped, the aux sta is dead: clean up driver state */ iwl_mvm_del_aux_sta(mvm); + iwl_free_fw_paging(mvm); + /* * Clear IN_HW_RESTART flag when stopping the hw (as restart_complete() * won't be called in this case). diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 5e8ab79..d278399 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -761,8 +761,6 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode) for (i = 0; i < NVM_MAX_NUM_SECTIONS; i++) kfree(mvm->nvm_sections[i].data); - iwl_free_fw_paging(mvm); - iwl_mvm_tof_clean(mvm); ieee80211_free_hw(mvm->hw); -- cgit v0.10.2 From 372f7d6ac11235a69b2cb356cdc8bf67bd68f4c4 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Fri, 11 Mar 2016 22:44:37 +0530 Subject: b43: Fix memory leaks in b43_bus_dev_ssb_init and b43_bus_dev_bcma_init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The memory allocated by kzalloc in b43_bus_dev_ssb_init and b43_bus_dev_bcma_init is not freed. This patch fixes the bug by adding kfree in b43_ssb_remove, b43_bcma_remove and error handling code of b43_bcma_probe. Thanks Michael for his suggestion. Signed-off-by: Jia-Ju Bai Acked-by: Michael Büsch Signed-off-by: Sudip Mukherjee Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c index 72380af..b0603e7 100644 --- a/drivers/net/wireless/broadcom/b43/main.c +++ b/drivers/net/wireless/broadcom/b43/main.c @@ -5680,11 +5680,12 @@ static int b43_bcma_probe(struct bcma_device *core) INIT_WORK(&wl->firmware_load, b43_request_firmware); schedule_work(&wl->firmware_load); -bcma_out: return err; bcma_err_wireless_exit: ieee80211_free_hw(wl->hw); +bcma_out: + kfree(dev); return err; } @@ -5712,8 +5713,8 @@ static void b43_bcma_remove(struct bcma_device *core) b43_rng_exit(wl); b43_leds_unregister(wl); - ieee80211_free_hw(wl->hw); + kfree(wldev->dev); } static struct bcma_driver b43_bcma_driver = { @@ -5796,6 +5797,7 @@ static void b43_ssb_remove(struct ssb_device *sdev) b43_leds_unregister(wl); b43_wireless_exit(dev, wl); + kfree(dev); } static struct ssb_driver b43_ssb_driver = { -- cgit v0.10.2 From c58d900cc96a5106e2feaed8d3d7361669a91396 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 17 Mar 2016 10:20:20 +0100 Subject: bcma: fix building without OF_IRQ The bcma driver core can be built with or without DT support, but it fails to build when CONFIG_OF=y and CONFIG_OF_IRQ=n, which can happen on platforms that do not support IRQ domains. ERROR: "irq_create_of_mapping" [drivers/bcma/bcma.ko] undefined! ERROR: "of_irq_parse_raw" [drivers/bcma/bcma.ko] undefined! ERROR: "of_irq_parse_one" [drivers/bcma/bcma.ko] undefined! This adds another compile-time check for OF_IRQ, but also gets rid of now unneeded #ifdef checks: Using the simpler IS_ENABLED() check for OF_IRQ also covers the case of not having CONFIG_OF enabled. The check for CONFIG_OF_ADDRESS was added to allow building on architectures without OF_ADDRESS, but that has been addressed already in b1d06b60e90c ("of: Provide static inline function for of_translate_address if needed"). Signed-off-by: Arnd Bergmann Signed-off-by: Kalle Valo diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 786be8f..1f63547 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -136,7 +136,6 @@ static bool bcma_is_core_needed_early(u16 core_id) return false; } -#if defined(CONFIG_OF) && defined(CONFIG_OF_ADDRESS) static struct device_node *bcma_of_find_child_device(struct platform_device *parent, struct bcma_device *core) { @@ -184,7 +183,7 @@ static unsigned int bcma_of_get_irq(struct platform_device *parent, struct of_phandle_args out_irq; int ret; - if (!parent || !parent->dev.of_node) + if (!IS_ENABLED(CONFIG_OF_IRQ) || !parent || !parent->dev.of_node) return 0; ret = bcma_of_irq_parse(parent, core, &out_irq, num); @@ -202,23 +201,15 @@ static void bcma_of_fill_device(struct platform_device *parent, { struct device_node *node; + if (!IS_ENABLED(CONFIG_OF_IRQ)) + return; + node = bcma_of_find_child_device(parent, core); if (node) core->dev.of_node = node; core->irq = bcma_of_get_irq(parent, core, 0); } -#else -static void bcma_of_fill_device(struct platform_device *parent, - struct bcma_device *core) -{ -} -static inline unsigned int bcma_of_get_irq(struct platform_device *parent, - struct bcma_device *core, int num) -{ - return 0; -} -#endif /* CONFIG_OF */ unsigned int bcma_core_irq(struct bcma_device *core, int num) { -- cgit v0.10.2 From 2acd846485549655582ee379ceb966206f91e6f8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 17 Mar 2016 11:03:50 +0100 Subject: rtlwifi: fix gcc-6 indentation warning The rtl8821ae_dm_txpower_tracking_callback_thermalmeter function contains a call to RT_TRACE() that is indented in a misleading way, as pointed out by a gcc-6 warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c: In function 'rtl8821ae_dm_txpower_tracking_callback_thermalmeter': drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2491:4: error: statement is indented as if it were guarded by... RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD, ^~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2488:3: note: ...this 'for' clause, but it is not for (p = RF90_PATH_A; p < MAX_PATH_NUM_8821A; p++) ^~~ It is clear from the context that the call was not meant to be part of the loop and only the indentation is wrong, so this removes the extra tabs. Signed-off-by: Arnd Bergmann Acked-by: Larry Finger Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c index 95dcbff..6a8245c 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c @@ -2488,9 +2488,9 @@ void rtl8821ae_dm_txpower_tracking_callback_thermalmeter( for (p = RF90_PATH_A; p < MAX_PATH_NUM_8821A; p++) rtldm->swing_idx_ofdm_base[p] = rtldm->swing_idx_ofdm[p]; - RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD, - "pDM_Odm->RFCalibrateInfo.ThermalValue = %d ThermalValue= %d\n", - rtldm->thermalvalue, thermal_value); + RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD, + "pDM_Odm->RFCalibrateInfo.ThermalValue = %d ThermalValue= %d\n", + rtldm->thermalvalue, thermal_value); /*Record last Power Tracking Thermal Value*/ rtldm->thermalvalue = thermal_value; } -- cgit v0.10.2 From d643678b9a4e432a574b2ec601216afd720c69b6 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 28 Mar 2016 22:11:30 +0530 Subject: ASoC: Intel: Skylake: Fix for unloading module only when it is loaded Module needs to be unloaded only when it is loaded successfully. To fix this, first correct the module state sequence and set module state to LOADED if module is loaded successfully. When unloading the module check if module state is not in UNINIT, then unload it. Signed-off-by: Jeeja KP Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 545b4e7..3f393cb 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -490,6 +490,8 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) mconfig->id.module_id, mconfig->guid); if (ret < 0) return ret; + + mconfig->m_state = SKL_MODULE_LOADED; } /* update blob if blob is null for be with default value */ @@ -524,7 +526,8 @@ static int skl_tplg_unload_pipe_modules(struct skl_sst *ctx, list_for_each_entry(w_module, &pipe->w_list, node) { mconfig = w_module->w->priv; - if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod) + if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod && + mconfig->m_state > SKL_MODULE_UNINIT) return ctx->dsp->fw_ops.unload_mod(ctx->dsp, mconfig->id.module_id); } diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index de3c401..d2d9230 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -274,10 +274,10 @@ struct skl_pipe { enum skl_module_state { SKL_MODULE_UNINIT = 0, - SKL_MODULE_INIT_DONE = 1, - SKL_MODULE_LOADED = 2, - SKL_MODULE_UNLOADED = 3, - SKL_MODULE_BIND_DONE = 4 + SKL_MODULE_LOADED = 1, + SKL_MODULE_INIT_DONE = 2, + SKL_MODULE_BIND_DONE = 3, + SKL_MODULE_UNLOADED = 4, }; struct skl_module_cfg { -- cgit v0.10.2 From 4f329d9fbab630af44db2f787eb79ca52e6ba22e Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 28 Mar 2016 22:11:31 +0530 Subject: ASoC: Intel: Skylake: Fix DSP resource de-allocation In PRE PMD of widget handler DSP resources are allocated after the creation of DSP pipe and modules and in POST PMD DSP resources are destroyed. If there is any failure in pipe or module creation in PRE PMD, pcm trigger fails and finally POST PMD gets called and DSP resources are freed, without getting allocated. Fixes the DSP resource de-allocation by allocating the resource before creation of pipe and module in PRE PMD and in POST PMD, free the resources. Signed-off-by: Jeeja KP Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 3f393cb..5a85f3a 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -485,6 +485,8 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) if (!skl_is_pipe_mcps_avail(skl, mconfig)) return -ENOMEM; + skl_tplg_alloc_pipe_mcps(skl, mconfig); + if (mconfig->is_loadable && ctx->dsp->fw_ops.load_mod) { ret = ctx->dsp->fw_ops.load_mod(ctx->dsp, mconfig->id.module_id, mconfig->guid); @@ -511,7 +513,6 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) ret = skl_tplg_set_module_params(w, ctx); if (ret < 0) return ret; - skl_tplg_alloc_pipe_mcps(skl, mconfig); } return 0; @@ -561,6 +562,9 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, if (!skl_is_pipe_mem_avail(skl, mconfig)) return -ENOMEM; + skl_tplg_alloc_pipe_mem(skl, mconfig); + skl_tplg_alloc_pipe_mcps(skl, mconfig); + /* * Create a list of modules for pipe. * This list contains modules from source to sink @@ -604,9 +608,6 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, src_module = dst_module; } - skl_tplg_alloc_pipe_mem(skl, mconfig); - skl_tplg_alloc_pipe_mcps(skl, mconfig); - return 0; } -- cgit v0.10.2 From e6cee90075c0ff261ff7eef8ad892429f028e194 Mon Sep 17 00:00:00 2001 From: Ben Zhang Date: Fri, 25 Mar 2016 16:10:39 -0700 Subject: ASoC: nau8825: Fix jack detection across suspend Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 1c87299..683769f 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -343,9 +343,12 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL, 0), - /* ADC for button press detection */ - SND_SOC_DAPM_ADC("SAR", NULL, NAU8825_REG_SAR_CTRL, - NAU8825_SAR_ADC_EN_SFT, 0), + /* ADC for button press detection. A dapm supply widget is used to + * prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON + * during suspend. + */ + SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL, + NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0), SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0), SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0), @@ -607,6 +610,16 @@ static bool nau8825_is_jack_inserted(struct regmap *regmap) static void nau8825_restart_jack_detection(struct regmap *regmap) { + /* Chip needs one FSCLK cycle in order to generate interrupts, + * as we cannot guarantee one will be provided by the system. Turning + * master mode on then off enables us to generate that FSCLK cycle + * with a minimum of contention on the clock bus. + */ + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); + /* this will restart the entire jack detection process including MIC/GND * switching and create interrupts. We have to go from 0 to 1 and back * to 0 to restart. @@ -728,7 +741,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) struct regmap *regmap = nau8825->regmap; int active_irq, clear_irq = 0, event = 0, event_mask = 0; - regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq); + if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) { + dev_err(nau8825->dev, "failed to read irq status\n"); + return IRQ_NONE; + } if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) == NAU8825_JACK_EJECTION_DETECTED) { @@ -1141,33 +1157,74 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec, return ret; } } - - ret = regcache_sync(nau8825->regmap); - if (ret) { - dev_err(codec->dev, - "Failed to sync cache: %d\n", ret); - return ret; - } } - break; case SND_SOC_BIAS_OFF: if (nau8825->mclk_freq) clk_disable_unprepare(nau8825->mclk); - - regcache_mark_dirty(nau8825->regmap); break; } return 0; } +#ifdef CONFIG_PM +static int nau8825_suspend(struct snd_soc_codec *codec) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + disable_irq(nau8825->irq); + regcache_cache_only(nau8825->regmap, true); + regcache_mark_dirty(nau8825->regmap); + + return 0; +} + +static int nau8825_resume(struct snd_soc_codec *codec) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + /* The chip may lose power and reset in S3. regcache_sync restores + * register values including configurations for sysclk, irq, and + * jack/button detection. + */ + regcache_cache_only(nau8825->regmap, false); + regcache_sync(nau8825->regmap); + + /* Check the jack plug status directly. If the headset is unplugged + * during S3 when the chip has no power, there will be no jack + * detection irq even after the nau8825_restart_jack_detection below, + * because the chip just thinks no headset has ever been plugged in. + */ + if (!nau8825_is_jack_inserted(nau8825->regmap)) { + nau8825_eject_jack(nau8825); + snd_soc_jack_report(nau8825->jack, 0, SND_JACK_HEADSET); + } + + enable_irq(nau8825->irq); + + /* Run jack detection to check the type (OMTP or CTIA) of the headset + * if there is one. This handles the case where a different type of + * headset is plugged in during S3. This triggers an IRQ iff a headset + * is already plugged in. + */ + nau8825_restart_jack_detection(nau8825->regmap); + + return 0; +} +#else +#define nau8825_suspend NULL +#define nau8825_resume NULL +#endif + static struct snd_soc_codec_driver nau8825_codec_driver = { .probe = nau8825_codec_probe, .set_sysclk = nau8825_set_sysclk, .set_pll = nau8825_set_pll, .set_bias_level = nau8825_set_bias_level, .suspend_bias_off = true, + .suspend = nau8825_suspend, + .resume = nau8825_resume, .controls = nau8825_controls, .num_controls = ARRAY_SIZE(nau8825_controls), @@ -1277,16 +1334,6 @@ static int nau8825_setup_irq(struct nau8825 *nau8825) regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR); - /* Chip needs one FSCLK cycle in order to generate interrupts, - * as we cannot guarantee one will be provided by the system. Turning - * master mode on then off enables us to generate that FSCLK cycle - * with a minimum of contention on the clock bus. - */ - regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, - NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); - regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, - NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); - ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL, nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT, "nau8825", nau8825); @@ -1354,36 +1401,6 @@ static int nau8825_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM_SLEEP -static int nau8825_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct nau8825 *nau8825 = dev_get_drvdata(dev); - - disable_irq(client->irq); - regcache_cache_only(nau8825->regmap, true); - regcache_mark_dirty(nau8825->regmap); - - return 0; -} - -static int nau8825_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct nau8825 *nau8825 = dev_get_drvdata(dev); - - regcache_cache_only(nau8825->regmap, false); - regcache_sync(nau8825->regmap); - enable_irq(client->irq); - - return 0; -} -#endif - -static const struct dev_pm_ops nau8825_pm = { - SET_SYSTEM_SLEEP_PM_OPS(nau8825_suspend, nau8825_resume) -}; - static const struct i2c_device_id nau8825_i2c_ids[] = { { "nau8825", 0 }, { } @@ -1410,7 +1427,6 @@ static struct i2c_driver nau8825_driver = { .name = "nau8825", .of_match_table = of_match_ptr(nau8825_of_ids), .acpi_match_table = ACPI_PTR(nau8825_acpi_match), - .pm = &nau8825_pm, }, .probe = nau8825_i2c_probe, .remove = nau8825_i2c_remove, -- cgit v0.10.2 From 45aa56cd0ffc2ebc2274f1bacc985b6f032c0120 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Mon, 21 Mar 2016 16:08:42 +0800 Subject: intel-hid: add a workaround to ignore an event after waking up from S4. This is the same as the original workaround from S3 but for S4. Without this workaround, a rfkill event will be received and it will toggle wireless devices when radio hotkey is not pressed. Signed-off-by: Alex Hung Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index f93abc8..a818db6 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -91,6 +91,8 @@ static int intel_hid_pl_resume_handler(struct device *device) } static const struct dev_pm_ops intel_hid_pl_pm_ops = { + .freeze = intel_hid_pl_suspend_handler, + .restore = intel_hid_pl_resume_handler, .suspend = intel_hid_pl_suspend_handler, .resume = intel_hid_pl_resume_handler, }; -- cgit v0.10.2 From 00c9329ebe2d19a13afd86ba75218f868f2788ba Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 15 Feb 2016 11:11:06 -0300 Subject: rtc: s3c: Document in binding that only s3c6410 needs a src clk The S3C binding doc says that the RTC and RTC source clocks are required but the S3C driver supports different HW IP and only the s3c6410 needs a source clock. Fix the binding explaining that the source clock is only needed for the s3c6410-rtc compatible controller. Reported-by: Krzysztof Kozlowski Signed-off-by: Javier Martinez Canillas Acked-by: Alexandre Belloni Reviewed-by: Krzysztof Kozlowski Signed-off-by: Alexandre Belloni diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index 1068ffc..fdde63a 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -15,9 +15,10 @@ Required properties: is the rtc tick interrupt. The number of cells representing a interrupt depends on the parent interrupt controller. - clocks: Must contain a list of phandle and clock specifier for the rtc - and source clocks. -- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the - same order as the clocks property. + clock and in the case of a s3c6410 compatible controller, also + a source clock. +- clock-names: Must contain "rtc" and for a s3c6410 compatible controller, + a "rtc_src" sorted in the same order as the clocks property. Example: -- cgit v0.10.2 From 33362c69c8e68281633a7c3a1d5c840e940097b7 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 28 Mar 2016 10:47:34 +0100 Subject: ASoC: wm8962: Correct typo when setting DSPCLK rate The variable dspclk holds the rate of the DSPCLK, but the variable sysclk holds an identifier for the clock. Currently if read a non-sensical value from the DSPCLK_DIV register we assign sysclk to dspclk, clearly this was intended to be sysclk_rate. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 8822360..720a14e 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2471,7 +2471,7 @@ static void wm8962_configure_bclk(struct snd_soc_codec *codec) break; default: dev_warn(codec->dev, "Unknown DSPCLK divisor read back\n"); - dspclk = wm8962->sysclk; + dspclk = wm8962->sysclk_rate; } dev_dbg(codec->dev, "DSPCLK is %dHz, BCLK %d\n", dspclk, wm8962->bclk); -- cgit v0.10.2 From 162f98dea487206d9ab79fc12ed64700667a894d Mon Sep 17 00:00:00 2001 From: Vladis Dronov Date: Thu, 31 Mar 2016 10:53:42 -0700 Subject: Input: gtco - fix crash on detecting device without endpoints The gtco driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. Also let's fix a minor coding style issue. The full correct report of this issue can be found in the public Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283385 Reported-by: Ralf Spenneberg Signed-off-by: Vladis Dronov Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index 3a7f3a4..7c18249 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -858,6 +858,14 @@ static int gtco_probe(struct usb_interface *usbinterface, goto err_free_buf; } + /* Sanity check that a device has an endpoint */ + if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) { + dev_err(&usbinterface->dev, + "Invalid number of endpoints\n"); + error = -EINVAL; + goto err_free_urb; + } + /* * The endpoint is always altsetting 0, we know this since we know * this device only has one interrupt endpoint @@ -879,7 +887,7 @@ static int gtco_probe(struct usb_interface *usbinterface, * HID report descriptor */ if (usb_get_extra_descriptor(usbinterface->cur_altsetting, - HID_DEVICE_TYPE, &hid_desc) != 0){ + HID_DEVICE_TYPE, &hid_desc) != 0) { dev_err(&usbinterface->dev, "Can't retrieve exta USB descriptor to get hid report descriptor length\n"); error = -EIO; -- cgit v0.10.2 From b707c65ae70e24c47a0ce4a7279224ce8f0ffb7f Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Tue, 22 Mar 2016 19:00:55 +0100 Subject: s390/scm_blk: fix deadlock for requests != REQ_TYPE_FS When we refuse a non REQ_TYPE_FS request in the build request function we already hold the queue lock. Thus we must not call blk_end_request_all but __blk_end_request_all. Reported-by: Peter Oberparleiter Fixes: de9587a ('s390/scm_blk: fix endless loop for requests != REQ_TYPE_FS') Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c index 75d9896..e6f54d3 100644 --- a/drivers/s390/block/scm_blk.c +++ b/drivers/s390/block/scm_blk.c @@ -303,7 +303,7 @@ static void scm_blk_request(struct request_queue *rq) if (req->cmd_type != REQ_TYPE_FS) { blk_start_request(req); blk_dump_rq_flags(req, KMSG_COMPONENT " bad request"); - blk_end_request_all(req, -EIO); + __blk_end_request_all(req, -EIO); continue; } -- cgit v0.10.2 From 9d89d9e61d361f3adb75e1aebe4bb367faf16cfa Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 31 Mar 2016 11:48:31 +0200 Subject: s390/pci: add extra padding to function measurement block Newer machines might use a different (larger) format for function measurement blocks. To ensure that we comply with the alignment requirement on these machines and prevent memory corruption (when firmware writes more data than we expect) add 16 padding bytes at the end of the fmb. Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index b6bfa16..535a46d 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -44,7 +44,8 @@ struct zpci_fmb { u64 rpcit_ops; u64 dma_rbytes; u64 dma_wbytes; -} __packed __aligned(64); + u64 pad[2]; +} __packed __aligned(128); enum zpci_state { ZPCI_FN_STATE_RESERVED, -- cgit v0.10.2 From 4f375903ccbff78e1da02133e51e37a097cd3313 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Fri, 1 Apr 2016 13:35:16 +0100 Subject: s390/seccomp: include generic seccomp header file Fixes this build error on linux-next: kernel/seccomp.c: In function '__secure_computing_strict': kernel/seccomp.c:526:3: error: implicit declaration of function 'get_compat_mode1_syscalls' The retrieval of compat syscall numbers were moved into inline function defined in asm-generic header but the asm-generic header is not being used by s390. [heiko.carstens@de.ibm.com]: even though the build error will trigger only in the next merge window it makes sense to include the generic header file already now. Fixes: ("seccomp: Get compat syscalls from asm-generic header") Cc: Matt Redfearn Signed-off-by: Sudip Mukherjee Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/seccomp.h b/arch/s390/include/asm/seccomp.h index 781a9cf..e10f833 100644 --- a/arch/s390/include/asm/seccomp.h +++ b/arch/s390/include/asm/seccomp.h @@ -13,4 +13,6 @@ #define __NR_seccomp_exit_32 __NR_exit #define __NR_seccomp_sigreturn_32 __NR_sigreturn +#include + #endif /* _ASM_S390_SECCOMP_H */ -- cgit v0.10.2 From 0fee1798af81b1428d8d5886ea48116444e635fc Mon Sep 17 00:00:00 2001 From: "Subhransu S. Prusty" Date: Fri, 1 Apr 2016 13:36:25 +0530 Subject: ASoC: hdac_hdmi: Fix to use dev_pm ops instead soc pm Use dev_pm ops feature instead of soc pm as core assumes system is capable of direct complete. Register with complete callback instead of resume to synchronize with Jack notification from display driver. This ensures correct Jack notification to user space. Signed-off-by: Subhransu S. Prusty Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 26f9459..da3432c 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -1420,9 +1420,9 @@ static int hdmi_codec_remove(struct snd_soc_codec *codec) } #ifdef CONFIG_PM -static int hdmi_codec_resume(struct snd_soc_codec *codec) +static void hdmi_codec_complete(struct device *dev) { - struct hdac_ext_device *edev = snd_soc_codec_get_drvdata(codec); + struct hdac_ext_device *edev = to_hda_ext_device(dev); struct hdac_hdmi_priv *hdmi = edev->private_data; struct hdac_hdmi_pin *pin; struct hdac_device *hdac = &edev->hdac; @@ -1464,19 +1464,15 @@ static int hdmi_codec_resume(struct snd_soc_codec *codec) dev_err(bus->dev, "Cannot turn OFF display power on i915, err: %d\n", err); - return err; } - - return 0; } #else -#define hdmi_codec_resume NULL +#define hdmi_codec_complete NULL #endif static struct snd_soc_codec_driver hdmi_hda_codec = { .probe = hdmi_codec_probe, .remove = hdmi_codec_remove, - .resume = hdmi_codec_resume, .idle_bias_off = true, }; @@ -1629,6 +1625,7 @@ static int hdac_hdmi_runtime_resume(struct device *dev) static const struct dev_pm_ops hdac_hdmi_pm = { SET_RUNTIME_PM_OPS(hdac_hdmi_runtime_suspend, hdac_hdmi_runtime_resume, NULL) + .complete = hdmi_codec_complete, }; static const struct hda_device_id hdmi_list[] = { -- cgit v0.10.2 From 1b377ccddd14cd04df4b9523a426b34f928002bc Mon Sep 17 00:00:00 2001 From: "Subhransu S. Prusty" Date: Fri, 1 Apr 2016 13:36:26 +0530 Subject: ASoC: hdac_hdmi: Fix codec power state in S3 during playback If the system enters S3 during a playback, codec power needs to be turned OFF during suspend and restored during resume. With this patch the AFG node is set to D3 and codec power is turned OFF during controller suspend call. During resume, the codec power is left in ON state if the playback was in progress while suspending. Also setting power state for AFG node is optimized. With this the loop with timeout is removed and codec_read is used instead. Signed-off-by: Subhransu S. Prusty Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index da3432c..aaa038f 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -1420,32 +1420,39 @@ static int hdmi_codec_remove(struct snd_soc_codec *codec) } #ifdef CONFIG_PM +static int hdmi_codec_prepare(struct device *dev) +{ + struct hdac_ext_device *edev = to_hda_ext_device(dev); + struct hdac_device *hdac = &edev->hdac; + + pm_runtime_get_sync(&edev->hdac.dev); + + /* + * Power down afg. + * codec_read is preferred over codec_write to set the power state. + * This way verb is send to set the power state and response + * is received. So setting power state is ensured without using loop + * to read the state. + */ + snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, + AC_PWRST_D3); + + return 0; +} + static void hdmi_codec_complete(struct device *dev) { struct hdac_ext_device *edev = to_hda_ext_device(dev); struct hdac_hdmi_priv *hdmi = edev->private_data; struct hdac_hdmi_pin *pin; struct hdac_device *hdac = &edev->hdac; - struct hdac_bus *bus = hdac->bus; - int err; - unsigned long timeout; - - hdac_hdmi_skl_enable_all_pins(&edev->hdac); - hdac_hdmi_skl_enable_dp12(&edev->hdac); /* Power up afg */ - if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)) { - - snd_hdac_codec_write(hdac, hdac->afg, 0, - AC_VERB_SET_POWER_STATE, AC_PWRST_D0); + snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, + AC_PWRST_D0); - /* Wait till power state is set to D0 */ - timeout = jiffies + msecs_to_jiffies(1000); - while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0) - && time_before(jiffies, timeout)) { - msleep(50); - } - } + hdac_hdmi_skl_enable_all_pins(&edev->hdac); + hdac_hdmi_skl_enable_dp12(&edev->hdac); /* * As the ELD notify callback request is not entertained while the @@ -1455,18 +1462,10 @@ static void hdmi_codec_complete(struct device *dev) list_for_each_entry(pin, &hdmi->pin_list, head) hdac_hdmi_present_sense(pin, 1); - /* - * Codec power is turned ON during controller resume. - * Turn it OFF here - */ - err = snd_hdac_display_power(bus, false); - if (err < 0) { - dev_err(bus->dev, - "Cannot turn OFF display power on i915, err: %d\n", - err); - } + pm_runtime_put_sync(&edev->hdac.dev); } #else +#define hdmi_codec_prepare NULL #define hdmi_codec_complete NULL #endif @@ -1557,7 +1556,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) struct hdac_ext_device *edev = to_hda_ext_device(dev); struct hdac_device *hdac = &edev->hdac; struct hdac_bus *bus = hdac->bus; - unsigned long timeout; int err; dev_dbg(dev, "Enter: %s\n", __func__); @@ -1566,20 +1564,15 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) if (!bus) return 0; - /* Power down afg */ - if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) { - snd_hdac_codec_write(hdac, hdac->afg, 0, - AC_VERB_SET_POWER_STATE, AC_PWRST_D3); - - /* Wait till power state is set to D3 */ - timeout = jiffies + msecs_to_jiffies(1000); - while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3) - && time_before(jiffies, timeout)) { - - msleep(50); - } - } - + /* + * Power down afg. + * codec_read is preferred over codec_write to set the power state. + * This way verb is send to set the power state and response + * is received. So setting power state is ensured without using loop + * to read the state. + */ + snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, + AC_PWRST_D3); err = snd_hdac_display_power(bus, false); if (err < 0) { dev_err(bus->dev, "Cannot turn on display power on i915\n"); @@ -1612,9 +1605,8 @@ static int hdac_hdmi_runtime_resume(struct device *dev) hdac_hdmi_skl_enable_dp12(&edev->hdac); /* Power up afg */ - if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)) - snd_hdac_codec_write(hdac, hdac->afg, 0, - AC_VERB_SET_POWER_STATE, AC_PWRST_D0); + snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, + AC_PWRST_D0); return 0; } @@ -1625,6 +1617,7 @@ static int hdac_hdmi_runtime_resume(struct device *dev) static const struct dev_pm_ops hdac_hdmi_pm = { SET_RUNTIME_PM_OPS(hdac_hdmi_runtime_suspend, hdac_hdmi_runtime_resume, NULL) + .prepare = hdmi_codec_prepare, .complete = hdmi_codec_complete, }; -- cgit v0.10.2 From af037412629d8549e04039a57cf99a59b6e7a01b Mon Sep 17 00:00:00 2001 From: "Subhransu S. Prusty" Date: Fri, 1 Apr 2016 13:36:27 +0530 Subject: ASoC: Intel: Skylake: Fix to turn OFF codec power when entering S3 Signed-off-by: Subhransu S. Prusty Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 07d9bc1..3982f55 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -222,6 +222,7 @@ static int skl_suspend(struct device *dev) struct hdac_ext_bus *ebus = pci_get_drvdata(pci); struct skl *skl = ebus_to_skl(ebus); struct hdac_bus *bus = ebus_to_hbus(ebus); + int ret = 0; /* * Do not suspend if streams which are marked ignore suspend are @@ -232,10 +233,20 @@ static int skl_suspend(struct device *dev) enable_irq_wake(bus->irq); pci_save_state(pci); pci_disable_device(pci); - return 0; } else { - return _skl_suspend(ebus); + ret = _skl_suspend(ebus); + if (ret < 0) + return ret; } + + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { + ret = snd_hdac_display_power(bus, false); + if (ret < 0) + dev_err(bus->dev, + "Cannot turn OFF display power on i915\n"); + } + + return ret; } static int skl_resume(struct device *dev) -- cgit v0.10.2 From 338d51889851cb2ac900d2ec75c8185afcde8caf Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Fri, 1 Apr 2016 15:00:25 -0500 Subject: Revert "dts: msm8974: Add blsp2_bam dma node" Revert this commit to fix regressions on non-dragonboard MSM8974 boards. This will be put back in after the correct fixes to the bam driver are accepted that allow remote processor control of the main control registers. This reverts commit 62bc8179222372624fd8a52b88327b962614d7b2. Signed-off-by: Andy Gross diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ef53305..d7eef25 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include +#include #include #include "skeleton.dtsi" @@ -479,16 +479,6 @@ interrupt-controller; #interrupt-cells = <4>; }; - - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; }; smd { -- cgit v0.10.2 From 10c0f0e92f019ab8d0c17da3696e35b0eef4ec16 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Fri, 1 Apr 2016 15:02:06 -0500 Subject: Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node" Revert this commit to fix regressions on non-dragonboard MSM8974 boards. This will be put back in after the correct fixes to the bam driver are accepted that allow remote processor control of the main control registers. This reverts commit 0a5d0f85bba61d8643d78869c7c4214d6c2a7ce6. Signed-off-by: Andy Gross diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index d7eef25..8193139 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -460,8 +460,6 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; }; spmi_bus: spmi@fc4cf000 { -- cgit v0.10.2 From d63b0f0c0f19dc8687387ead5a28148dcad1a4b9 Mon Sep 17 00:00:00 2001 From: Silvan Jegen Date: Thu, 17 Mar 2016 17:15:01 -0700 Subject: Input: xpad - add Mad Catz FightStick TE 2 VID/PID This adds the VID/PID combination for the Xbox One version of the Mad Catz FightStick TE 2. The functionality that this provides is about on par with what the Windows drivers for the stick manage to deliver. What works: - Digital stick - 6 main buttons - Xbox button - The two buttons on the back - The locking buttons (preventing accidental Xbox button press) What doesn't work: - Two of the main buttons (don't work on Windows either) - The "Haptic" button setting does not have an effect (not sure if it works on Windows) I added the MAP_TRIGGERS_TO_BUTTONS option but in my (limited) testing there was no practical difference with or without. The FightStick does not have triggers though so adding it makes sense. Signed-off-by: Silvan Jegen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index e8a84d1..1142a93 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -153,6 +153,7 @@ static const struct xpad_device { { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 }, + { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 }, { 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 }, @@ -304,6 +305,7 @@ static struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */ XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ + XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ -- cgit v0.10.2 From b2d7a9cd3ff8ec561348267c2ef7d47b2b91e801 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 28 Mar 2016 18:45:36 -0300 Subject: Revert "PCI: imx6: Add support for active-low reset GPIO" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 5c5fb40de8f1 ("PCI: imx6: Add support for active-low reset GPIO") cause regressions on some boards like MX6 Gateworks Ventana, for example. The reason for the breakage is that this commit sets the GPIO polarity in the wrong logic level. Also, the commit log is wrong because active-low reset GPIO is what the driver used to support since the beginning. So keep the old behavior that ignores the GPIO polarity specified in the device tree and treat the PCI reset GPIO as active-low. Reported-by: Krzysztof Hałasa Tested-by: Tim Harvey # Gateworks Ventana Signed-off-by: Fabio Estevam Signed-off-by: Bjorn Helgaas Acked-by: Tim Harvey Acked-by: Lucas Stach CC: stable@vger.kernel.org # v4.5+ diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index eb5a275..2f817fa 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -32,7 +32,7 @@ #define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp) struct imx6_pcie { - struct gpio_desc *reset_gpio; + int reset_gpio; struct clk *pcie_bus; struct clk *pcie_phy; struct clk *pcie; @@ -309,10 +309,10 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) usleep_range(200, 500); /* Some boards don't have PCIe reset GPIO. */ - if (imx6_pcie->reset_gpio) { - gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 0); + if (gpio_is_valid(imx6_pcie->reset_gpio)) { + gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0); msleep(100); - gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1); + gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1); } return 0; @@ -523,6 +523,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) { struct imx6_pcie *imx6_pcie; struct pcie_port *pp; + struct device_node *np = pdev->dev.of_node; struct resource *dbi_base; struct device_node *node = pdev->dev.of_node; int ret; @@ -544,8 +545,15 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(pp->dbi_base); /* Fetch GPIOs */ - imx6_pcie->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", - GPIOD_OUT_LOW); + imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0); + if (gpio_is_valid(imx6_pcie->reset_gpio)) { + ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio, + GPIOF_OUT_INIT_LOW, "PCIe reset"); + if (ret) { + dev_err(&pdev->dev, "unable to get reset gpio\n"); + return ret; + } + } /* Fetch clocks */ imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy"); -- cgit v0.10.2 From b8af8b1d80db13dd4f5e5a3698180bd9c14aee03 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 6 Apr 2016 14:36:06 +0300 Subject: ASoC: Intel: sst: fix a loop timeout in sst_hsw_stream_reset() In the original code we ended the loop with tries set to -1 instead of zero. Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown diff --git a/sound/soc/intel/haswell/sst-haswell-ipc.c b/sound/soc/intel/haswell/sst-haswell-ipc.c index ac60f13..9156522 100644 --- a/sound/soc/intel/haswell/sst-haswell-ipc.c +++ b/sound/soc/intel/haswell/sst-haswell-ipc.c @@ -1345,7 +1345,7 @@ int sst_hsw_stream_reset(struct sst_hsw *hsw, struct sst_hsw_stream *stream) return 0; /* wait for pause to complete before we reset the stream */ - while (stream->running && tries--) + while (stream->running && --tries) msleep(1); if (!tries) { dev_err(hsw->dev, "error: reset stream %d still running\n", -- cgit v0.10.2 From 7eb5ca09e48ec671586218ec4f381c43d534f2f4 Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Wed, 6 Apr 2016 10:14:46 -0700 Subject: Input: clarify we want BTN_TOOL_ on proximity This explicitly states behavior we already use for some touchpads and tablet devices. Signed-off-by: Peter Hutterer Signed-off-by: Dmitry Torokhov diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index 3f0f5ce..36ea940 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings: proximity of the device and while the value of the BTN_TOUCH code is 0. If the input device may be used freely in three dimensions, consider ABS_Z instead. + - BTN_TOOL_ should be set to 1 when the tool comes into detectable + proximity and set to 0 when the tool leaves detectable proximity. + BTN_TOOL_ signals the type of tool that is currently detected by the + hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH. * ABS_MT_: - Used to describe multitouch input events. Please see -- cgit v0.10.2 From ff76def3bd7e816fe0ca7f0840065c566a42ba2f Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 29 Mar 2016 11:05:16 +0200 Subject: netfilter: arp_tables: register table in initns arptables is broken since we didn't register the table anymore -- even 'arptables -L' fails. Fixes: b9e69e127397187b ("netfilter: xtables: don't hook tables by default") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/net/ipv4/netfilter/arptable_filter.c b/net/ipv4/netfilter/arptable_filter.c index dd8c80d..8f8713b 100644 --- a/net/ipv4/netfilter/arptable_filter.c +++ b/net/ipv4/netfilter/arptable_filter.c @@ -81,6 +81,12 @@ static int __init arptable_filter_init(void) return ret; } + ret = arptable_filter_table_init(&init_net); + if (ret) { + unregister_pernet_subsys(&arptable_filter_net_ops); + kfree(arpfilter_ops); + } + return ret; } -- cgit v0.10.2 From 644c7e48cb59cfc6988ddc7bf3d3b1ba5fe7fa9d Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Wed, 30 Mar 2016 11:34:35 +0200 Subject: netfilter: nf_conntrack_tcp: Fix stack out of bounds when parsing TCP options Baozeng Ding reported a KASAN stack out of bounds issue - it uncovered that the TCP option parsing routines in netfilter TCP connection tracking could read one byte out of the buffer of the TCP options. Therefore in the patch we check that the available data length is large enough to parse both TCP option code and size. Reported-by: Baozeng Ding Tested-by: Baozeng Ding Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 278f3b9..7cc1d9c 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -410,6 +410,8 @@ static void tcp_options(const struct sk_buff *skb, length--; continue; default: + if (length < 2) + return; opsize=*ptr++; if (opsize < 2) /* "silly options" */ return; @@ -470,6 +472,8 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff, length--; continue; default: + if (length < 2) + return; opsize = *ptr++; if (opsize < 2) /* "silly options" */ return; -- cgit v0.10.2 From c783e6fd7fe4d34f0231d0d8da36497404aa6d93 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 1 Apr 2016 17:53:05 -0500 Subject: ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen DRA7 has no SAR region for automated save and restore of wakeupgen, which does not make real since the SoC really does not do legacy OFF mode anymore. Further wakeupgen should never loose context in CSWR retention mode for MPU domain on DRA7 since that is the deepest state we will enter. So, just skip, instead of oopsing as follows while attemptint to enter suspend on BeagleBoard-X15. [ 55.589771] Unable to handle kernel paging request at virtual address 00002684 [ 55.589771] pgd = ec69c000 [...] [ 55.589771] [] (irq_notifier) from [] (notifier_call_chain+0x4c/0x8c) [ 55.589771] [] (notifier_call_chain) from [] (cpu_cluster_pm_enter+0x2c/0x78) [ 55.589771] [] (cpu_cluster_pm_enter) from [] (syscore_suspend+0xb8/0x31c) [ 55.589771] [] (syscore_suspend) from [] (suspend_devices_and_enter+0x308/0x9e4) [ 55.589771] [] (suspend_devices_and_enter) from [] (pm_suspend+0x640/0x75c) [ 55.589771] [] (pm_suspend) from [] (state_store+0x64/0xb8) [ 55.589771] [] (state_store) from [] (kernfs_fop_write+0xc0/0x1bc) [ 55.589771] [] (kernfs_fop_write) from [] (__vfs_write+0x1c/0xd8) [ 55.589771] [] (__vfs_write) from [] (vfs_write+0x90/0x16c) [ 55.589771] [] (vfs_write) from [] (SyS_write+0x44/0x9c) [ 55.589771] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x1c) [...] Signed-off-by: Nishanth Menon Tested-by: Keerthy Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index f397bd6..2c04f27 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -274,6 +274,10 @@ static inline void omap5_irq_save_context(void) */ static void irq_save_context(void) { + /* DRA7 has no SAR to save */ + if (soc_is_dra7xx()) + return; + if (!sar_base) sar_base = omap4_get_sar_ram_base(); @@ -290,6 +294,9 @@ static void irq_sar_clear(void) { u32 val; u32 offset = SAR_BACKUP_STATUS_OFFSET; + /* DRA7 has no SAR to save */ + if (soc_is_dra7xx()) + return; if (soc_is_omap54xx()) offset = OMAP5_SAR_BACKUP_STATUS_OFFSET; -- cgit v0.10.2 From ec490f6f600f93236f1ad439b9809de563343b2c Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 1 Apr 2016 17:53:06 -0500 Subject: ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap When commit 06c2d368fc36 ("ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls") introduced SoC check using omap_revision, it missed providing DRA7 as class for initializing the omap_version variable. Without doing this, soc_is_dra7xx() will fail and as a result, omap4_pm_init_early never initializes the dra7 erratum for CPU power state. This causes the suspend path to fail on DRA7 devices. Fixes: 06c2d368fc36 ("ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls") Signed-off-by: Nishanth Menon Tested-by: Keerthy Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3c87e40..2b86b25 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -736,7 +736,8 @@ void __init omap5_init_late(void) #ifdef CONFIG_SOC_DRA7XX void __init dra7xx_init_early(void) { - omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE)); + omap2_set_globals_tap(DRA7XX_CLASS, + OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE)); omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); omap2_control_base_init(); omap4_pm_init_early(); -- cgit v0.10.2 From eea08802f586acd6aef377d1b4a541821013cc0b Mon Sep 17 00:00:00 2001 From: Keerthy Date: Mon, 4 Apr 2016 11:07:15 +0530 Subject: ARM: dts: dra7: Correct clock tree for sys_32k_ck This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source. Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external crystal is not enabled at power up. Instead the CPU falls back to using an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually 20MHz on boards so far (which gives an emulated frequency of 32.786KHz) Modelling the same in device tree. Acked-by: Tero Kristo Signed-off-by: Keerthy Signed-off-by: Lokesh Vutla Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index d0bae06..ef2164a 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -98,12 +98,20 @@ clock-frequency = <32768>; }; - sys_32k_ck: sys_32k_ck { + sys_clk32_crystal_ck: sys_clk32_crystal_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; + sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin1>; + clock-mult = <1>; + clock-div = <610>; + }; + virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -2170,4 +2178,12 @@ ti,bit-shift = <22>; reg = <0x0558>; }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; + ti,bit-shift = <8>; + reg = <0x6c4>; + }; }; -- cgit v0.10.2 From 571afb4c8a4bbe88541364e7f6827340562f2736 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 1 Apr 2016 17:53:07 -0500 Subject: ARM: OMAP: Catch callers of revision information prior to it being populated omap_rev is used to detect various SoC types, however any misuse of the usage by invoking it earlier than it being populated will result in invalid results. Lets flag them as early as possible to prevent unintended side effects taking place. We get 0 if it is uninitialized and -1 when detection is done using device tree (as the case was for DRA7 as the case was prior to commit 06c2d368fc36 ("ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls") Signed-off-by: Nishanth Menon Tested-by: Keerthy Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 52de382..bfabc06 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -65,6 +65,7 @@ static struct omap_id omap_ids[] __initdata = { unsigned int omap_rev(void) { + WARN_ON_ONCE(!omap_revision || omap_revision == -1); return omap_revision; } EXPORT_SYMBOL(omap_rev); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d85c249..75fb6c0 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -46,6 +46,7 @@ u32 omap_features; unsigned int omap_rev(void) { + WARN_ON_ONCE(!omap_revision || omap_revision == -1); return omap_revision; } EXPORT_SYMBOL(omap_rev); -- cgit v0.10.2 From 49dd48dafec64fe99bdcc518092c5db4bffaa8a9 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 10 Apr 2016 02:28:41 +0300 Subject: sh_eth: re-enable-E-MAC interrupts in sh_eth_set_ringparam() The E-MAC interrupts are left disabled when the ring parameters are changed via 'ethtool'. In order to fix this, it's enough to call sh_eth_dev_init() with 'true' instead of 'false' for the second argument (which conveniently allows us to remove the following code re-enabling E-DMAC interrupts and reception). Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 004e2d7..ceea74c 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2194,17 +2194,13 @@ static int sh_eth_set_ringparam(struct net_device *ndev, __func__); return ret; } - ret = sh_eth_dev_init(ndev, false); + ret = sh_eth_dev_init(ndev, true); if (ret < 0) { netdev_err(ndev, "%s: sh_eth_dev_init failed.\n", __func__); return ret; } - mdp->irq_enabled = true; - sh_eth_write(ndev, mdp->cd->eesipr_value, EESIPR); - /* Setting the Rx mode will start the Rx process. */ - sh_eth_write(ndev, EDRRR_R, EDRRR); netif_device_attach(ndev); } -- cgit v0.10.2 From ffb810563c0c049872a504978e06c8892104fb6c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 10 Apr 2016 05:59:10 +0200 Subject: intel_pstate: Avoid getting stuck in high P-states when idle MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Jörg Otte reports that commit a4675fbc4a7a (cpufreq: intel_pstate: Replace timers with utilization update callbacks) caused the CPUs in his Haswell-based system to stay in the very high frequency region even if the system is completely idle. That turns out to be an existing problem in the intel_pstate driver's P-state selection algorithm for Core processors. Namely, all decisions made by that algorithm are based on the average frequency of the CPU between sampling events and on the P-state requested on the last invocation, so it may get stuck at a very hight frequency even if the utilization of the CPU is very low (in fact, it may get stuck in a inadequate P-state regardless of the CPU utilization). The only way to kick it out of that limbo is a sufficiently long idle period (3 times longer than the prescribed sampling interval), but if that doesn't happen often enough (eg. due to a timing change like after the above commit), the P-state of the CPU may be inadequate pretty much all the time. To address the most egregious manifestations of that issue, reset the core_busy value used to determine the next P-state to request if the utilization of the CPU, determined with the help of the MPERF feedback register and the TSC, is below 1%. Link: https://bugzilla.kernel.org/show_bug.cgi?id=115771 Reported-and-tested-by: Jörg Otte Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 8b5a415..30fe323 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1130,6 +1130,10 @@ static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu) sample_ratio = div_fp(int_tofp(pid_params.sample_rate_ns), int_tofp(duration_ns)); core_busy = mul_fp(core_busy, sample_ratio); + } else { + sample_ratio = div_fp(100 * cpu->sample.mperf, cpu->sample.tsc); + if (sample_ratio < int_tofp(1)) + core_busy = 0; } cpu->sample.busy_scaled = core_busy; -- cgit v0.10.2 From 1cbabcb9807e31e87ef3a12af76ea025ceb582d3 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Tue, 5 Apr 2016 16:44:12 -0500 Subject: ARM: DRA7: clockdomain: Implement timer workaround for errata i874 Errata Title: i874: TIMER5/6/7/8 interrupts not propagated Description: When TIMER5, TIMER6, TIMER7, or TIMER8 clocks are enabled (CM_IPU_TIMER5/6/7/8_CLKCTRL[0:1]MODULEMODE=0x2:ENABLE) and the CD-IPU is in HW_AUTO mode (CM_IPU_CLKSTCTRL[0:1]CLKTRCTRL=0x3:HW_AUTO) the corresponding TIMER will continue counting, but enabled interrupts will not be propagated to the destinations (MPU, DSP, etc) in the SoC until the TIMER registers are accessed from the CPUs (MPU, DSP etc.). This can result in missed timer interrupts. Workaround: In order for TIMER5/6/7/8 interrupts to be propagated and serviced correctly the CD_IPU domain should be set to SW_WKUP mode (CM_IPU_CLKSTCTRL[0:1]CLKTRCTRL=0x2:SW_WKUP). The above workaround is achieved by switching the IPU clockdomain flags from HWSUP_SWSUP to SWSUP only. Signed-off-by: Keerthy Signed-off-by: Suman Anna Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c index 7581e03..ef9ed36 100644 --- a/arch/arm/mach-omap2/clockdomains7xx_data.c +++ b/arch/arm/mach-omap2/clockdomains7xx_data.c @@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = { .cm_inst = DRA7XX_CM_CORE_AON_IPU_INST, .clkdm_offs = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS, .dep_bit = DRA7XX_IPU_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain mpu1_7xx_clkdm = { -- cgit v0.10.2 From ba6f5e33bdbb9ed2014b778fbbaecf20060ca989 Mon Sep 17 00:00:00 2001 From: Marcelo Ricardo Leitner Date: Wed, 6 Apr 2016 15:15:19 -0300 Subject: sctp: avoid refreshing heartbeat timer too often Currently on high rate SCTP streams the heartbeat timer refresh can consume quite a lot of resources as timer updates are costly and it contains a random factor, which a) is also costly and b) invalidates mod_timer() optimization for not editing a timer to the same value. It may even cause the timer to be slightly advanced, for no good reason. As suggested by David Laight this patch now removes this timer update from hot path by leaving the timer on and re-evaluating upon its expiration if the heartbeat is still needed or not, similarly to what is done for TCP. If it's not needed anymore the timer is re-scheduled to the new timeout, considering the time already elapsed. For this, we now record the last tx timestamp per transport, updated in the same spots as hb timer was restarted on tx. Also split up sctp_transport_reset_timers into sctp_transport_reset_t3_rtx and sctp_transport_reset_hb_timer, so we can re-arm T3 without re-arming the heartbeat one. On loopback with MTU of 65535 and data chunks with 1636, so that we have a considerable amount of chunks without stressing system calls, netperf -t SCTP_STREAM -l 30, perf looked like this before: Samples: 103K of event 'cpu-clock', Event count (approx.): 25833000000 Overhead Command Shared Object Symbol + 6,15% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string - 5,43% netperf [kernel.vmlinux] [k] _raw_write_unlock_irqrestore - _raw_write_unlock_irqrestore - 96,54% _raw_spin_unlock_irqrestore - 36,14% mod_timer + 97,24% sctp_transport_reset_timers + 2,76% sctp_do_sm + 33,65% __wake_up_sync_key + 28,77% sctp_ulpq_tail_event + 1,40% del_timer - 1,84% mod_timer + 99,03% sctp_transport_reset_timers + 0,97% sctp_do_sm + 1,50% sctp_ulpq_tail_event And after this patch, now with netperf -l 60: Samples: 230K of event 'cpu-clock', Event count (approx.): 57707250000 Overhead Command Shared Object Symbol + 5,65% netperf [kernel.vmlinux] [k] memcpy_erms + 5,59% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string - 5,05% netperf [kernel.vmlinux] [k] _raw_spin_unlock_irqrestore - _raw_spin_unlock_irqrestore + 49,89% __wake_up_sync_key + 45,68% sctp_ulpq_tail_event - 2,85% mod_timer + 76,51% sctp_transport_reset_t3_rtx + 23,49% sctp_do_sm + 1,55% del_timer + 2,50% netperf [sctp] [k] sctp_datamsg_from_user + 2,26% netperf [sctp] [k] sctp_sendmsg Throughput-wise, from 6800mbps without the patch to 7050mbps with it, ~3.7%. Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 6df1ce7..5a404c3 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -847,6 +847,11 @@ struct sctp_transport { */ ktime_t last_time_heard; + /* When was the last time that we sent a chunk using this + * transport? We use this to check for idle transports + */ + unsigned long last_time_sent; + /* Last time(in jiffies) when cwnd is reduced due to the congestion * indication based on ECNE chunk. */ @@ -952,7 +957,8 @@ void sctp_transport_route(struct sctp_transport *, union sctp_addr *, struct sctp_sock *); void sctp_transport_pmtu(struct sctp_transport *, struct sock *sk); void sctp_transport_free(struct sctp_transport *); -void sctp_transport_reset_timers(struct sctp_transport *); +void sctp_transport_reset_t3_rtx(struct sctp_transport *); +void sctp_transport_reset_hb_timer(struct sctp_transport *); int sctp_transport_hold(struct sctp_transport *); void sctp_transport_put(struct sctp_transport *); void sctp_transport_update_rto(struct sctp_transport *, __u32); diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 8d3d362..084718f 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -866,8 +866,10 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout, gfp_t gfp) * sender MUST assure that at least one T3-rtx * timer is running. */ - if (chunk->chunk_hdr->type == SCTP_CID_FWD_TSN) - sctp_transport_reset_timers(transport); + if (chunk->chunk_hdr->type == SCTP_CID_FWD_TSN) { + sctp_transport_reset_t3_rtx(transport); + transport->last_time_sent = jiffies; + } } break; @@ -924,8 +926,10 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout, gfp_t gfp) error = sctp_outq_flush_rtx(q, packet, rtx_timeout, &start_timer); - if (start_timer) - sctp_transport_reset_timers(transport); + if (start_timer) { + sctp_transport_reset_t3_rtx(transport); + transport->last_time_sent = jiffies; + } /* This can happen on COOKIE-ECHO resend. Only * one chunk can get bundled with a COOKIE-ECHO. @@ -1062,7 +1066,8 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout, gfp_t gfp) list_add_tail(&chunk->transmitted_list, &transport->transmitted); - sctp_transport_reset_timers(transport); + sctp_transport_reset_t3_rtx(transport); + transport->last_time_sent = jiffies; /* Only let one DATA chunk get bundled with a * COOKIE-ECHO chunk. diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 7f0bf79..56f364d 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -3080,8 +3080,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc, return SCTP_ERROR_RSRC_LOW; /* Start the heartbeat timer. */ - if (!mod_timer(&peer->hb_timer, sctp_transport_timeout(peer))) - sctp_transport_hold(peer); + sctp_transport_reset_hb_timer(peer); asoc->new_transport = peer; break; case SCTP_PARAM_DEL_IP: diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 7fe56d0..41b081a 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -69,8 +69,6 @@ static int sctp_side_effects(sctp_event_t event_type, sctp_subtype_t subtype, sctp_cmd_seq_t *commands, gfp_t gfp); -static void sctp_cmd_hb_timer_update(sctp_cmd_seq_t *cmds, - struct sctp_transport *t); /******************************************************************** * Helper functions ********************************************************************/ @@ -367,6 +365,7 @@ void sctp_generate_heartbeat_event(unsigned long data) struct sctp_association *asoc = transport->asoc; struct sock *sk = asoc->base.sk; struct net *net = sock_net(sk); + u32 elapsed, timeout; bh_lock_sock(sk); if (sock_owned_by_user(sk)) { @@ -378,6 +377,16 @@ void sctp_generate_heartbeat_event(unsigned long data) goto out_unlock; } + /* Check if we should still send the heartbeat or reschedule */ + elapsed = jiffies - transport->last_time_sent; + timeout = sctp_transport_timeout(transport); + if (elapsed < timeout) { + elapsed = timeout - elapsed; + if (!mod_timer(&transport->hb_timer, jiffies + elapsed)) + sctp_transport_hold(transport); + goto out_unlock; + } + error = sctp_do_sm(net, SCTP_EVENT_T_TIMEOUT, SCTP_ST_TIMEOUT(SCTP_EVENT_TIMEOUT_HEARTBEAT), asoc->state, asoc->ep, asoc, @@ -507,7 +516,7 @@ static void sctp_do_8_2_transport_strike(sctp_cmd_seq_t *commands, 0); /* Update the hb timer to resend a heartbeat every rto */ - sctp_cmd_hb_timer_update(commands, transport); + sctp_transport_reset_hb_timer(transport); } if (transport->state != SCTP_INACTIVE && @@ -634,11 +643,8 @@ static void sctp_cmd_hb_timers_start(sctp_cmd_seq_t *cmds, * hold a reference on the transport to make sure none of * the needed data structures go away. */ - list_for_each_entry(t, &asoc->peer.transport_addr_list, transports) { - - if (!mod_timer(&t->hb_timer, sctp_transport_timeout(t))) - sctp_transport_hold(t); - } + list_for_each_entry(t, &asoc->peer.transport_addr_list, transports) + sctp_transport_reset_hb_timer(t); } static void sctp_cmd_hb_timers_stop(sctp_cmd_seq_t *cmds, @@ -669,15 +675,6 @@ static void sctp_cmd_t3_rtx_timers_stop(sctp_cmd_seq_t *cmds, } -/* Helper function to update the heartbeat timer. */ -static void sctp_cmd_hb_timer_update(sctp_cmd_seq_t *cmds, - struct sctp_transport *t) -{ - /* Update the heartbeat timer. */ - if (!mod_timer(&t->hb_timer, sctp_transport_timeout(t))) - sctp_transport_hold(t); -} - /* Helper function to handle the reception of an HEARTBEAT ACK. */ static void sctp_cmd_transport_on(sctp_cmd_seq_t *cmds, struct sctp_association *asoc, @@ -742,8 +739,7 @@ static void sctp_cmd_transport_on(sctp_cmd_seq_t *cmds, sctp_transport_update_rto(t, (jiffies - hbinfo->sent_at)); /* Update the heartbeat timer. */ - if (!mod_timer(&t->hb_timer, sctp_transport_timeout(t))) - sctp_transport_hold(t); + sctp_transport_reset_hb_timer(t); if (was_unconfirmed && asoc->peer.transport_count == 1) sctp_transport_immediate_rtx(t); @@ -1614,7 +1610,7 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, case SCTP_CMD_HB_TIMER_UPDATE: t = cmd->obj.transport; - sctp_cmd_hb_timer_update(commands, t); + sctp_transport_reset_hb_timer(t); break; case SCTP_CMD_HB_TIMERS_STOP: diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 9b6b48c..81b8667 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -183,7 +183,7 @@ static void sctp_transport_destroy(struct sctp_transport *transport) /* Start T3_rtx timer if it is not already running and update the heartbeat * timer. This routine is called every time a DATA chunk is sent. */ -void sctp_transport_reset_timers(struct sctp_transport *transport) +void sctp_transport_reset_t3_rtx(struct sctp_transport *transport) { /* RFC 2960 6.3.2 Retransmission Timer Rules * @@ -197,11 +197,18 @@ void sctp_transport_reset_timers(struct sctp_transport *transport) if (!mod_timer(&transport->T3_rtx_timer, jiffies + transport->rto)) sctp_transport_hold(transport); +} + +void sctp_transport_reset_hb_timer(struct sctp_transport *transport) +{ + unsigned long expires; /* When a data chunk is sent, reset the heartbeat interval. */ - if (!mod_timer(&transport->hb_timer, - sctp_transport_timeout(transport))) - sctp_transport_hold(transport); + expires = jiffies + sctp_transport_timeout(transport); + if (time_before(transport->hb_timer.expires, expires) && + !mod_timer(&transport->hb_timer, + expires + prandom_u32_max(transport->rto))) + sctp_transport_hold(transport); } /* This transport has been assigned to an association. @@ -595,13 +602,13 @@ void sctp_transport_burst_reset(struct sctp_transport *t) unsigned long sctp_transport_timeout(struct sctp_transport *trans) { /* RTO + timer slack +/- 50% of RTO */ - unsigned long timeout = (trans->rto >> 1) + prandom_u32_max(trans->rto); + unsigned long timeout = trans->rto >> 1; if (trans->state != SCTP_UNCONFIRMED && trans->state != SCTP_PF) timeout += trans->hbinterval; - return timeout + jiffies; + return timeout; } /* Reset transport variables to their initial values */ -- cgit v0.10.2 From a36a0d4008488fa545c74445d69eaf56377d5d4e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 10 Apr 2016 23:01:30 -0400 Subject: decnet: Do not build routes to devices without decnet private data. In particular, make sure we check for decnet private presence for loopback devices. Signed-off-by: David S. Miller diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index 607a14f..b1dc096 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -1034,10 +1034,13 @@ source_ok: if (!fld.daddr) { fld.daddr = fld.saddr; - err = -EADDRNOTAVAIL; if (dev_out) dev_put(dev_out); + err = -EINVAL; dev_out = init_net.loopback_dev; + if (!dev_out->dn_ptr) + goto out; + err = -EADDRNOTAVAIL; dev_hold(dev_out); if (!fld.daddr) { fld.daddr = @@ -1110,6 +1113,8 @@ source_ok: if (dev_out == NULL) goto out; dn_db = rcu_dereference_raw(dev_out->dn_ptr); + if (!dn_db) + goto e_inval; /* Possible improvement - check all devices for local addr */ if (dn_dev_islocal(dev_out, fld.daddr)) { dev_put(dev_out); @@ -1151,6 +1156,8 @@ select_source: dev_put(dev_out); dev_out = init_net.loopback_dev; dev_hold(dev_out); + if (!dev_out->dn_ptr) + goto e_inval; fld.flowidn_oif = dev_out->ifindex; if (res.fi) dn_fib_info_put(res.fi); -- cgit v0.10.2 From e27260203912b40751fa353d009eaa5a642c739f Mon Sep 17 00:00:00 2001 From: Dmitry Ivanov Date: Thu, 7 Apr 2016 09:31:38 +0200 Subject: netlink: don't send NETLINK_URELEASE for unbound sockets All existing users of NETLINK_URELEASE use it to clean up resources that were previously allocated to a socket via some command. As a result, no users require getting this notification for unbound sockets. Sending it for unbound sockets, however, is a problem because any user (including unprivileged users) can create a socket that uses the same ID as an existing socket. Binding this new socket will fail, but if the NETLINK_URELEASE notification is generated for such sockets, the users thereof will be tricked into thinking the socket that they allocated the resources for is closed. In the nl80211 case, this will cause destruction of virtual interfaces that still belong to an existing hostapd process; this is the case that Dmitry noticed. In the NFC case, it will cause a poll abort. In the case of netlink log/queue it will cause them to stop reporting events, as if NFULNL_CFG_CMD_UNBIND/NFQNL_CFG_CMD_UNBIND had been called. Fix this problem by checking that the socket is bound before generating the NETLINK_URELEASE notification. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Ivanov Signed-off-by: Johannes Berg Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 215fc08..330ebd6 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -688,7 +688,7 @@ static int netlink_release(struct socket *sock) skb_queue_purge(&sk->sk_write_queue); - if (nlk->portid) { + if (nlk->portid && nlk->bound) { struct netlink_notify n = { .net = sock_net(sk), .protocol = sk->sk_protocol, -- cgit v0.10.2 From 734e00fa02eff5003827abc06a7ebf9449349109 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Thu, 7 Apr 2016 15:55:35 +0800 Subject: net: stmmac: socfgpa: Ensure emac bit set in System Manger for PTP When using the PTP fpga to hps clock source for the stmmac module the appropriate bit in the System Manager FPGA Interface Group register needs to be set. This is not set by the bootloader setup when the HPS emac pins are being for this emac module. This allows the PTP clock to be sourced from the FPGA and also connects the PTP pps and ext trig signals to the stmmac PTP hardware. Patch proposed by Phil Collins. Signed-off-by: Phil Reid Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index f0d797a..44022b1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -34,6 +34,9 @@ #define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003 #define SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000010 +#define SYSMGR_FPGAGRP_MODULE_REG 0x00000028 +#define SYSMGR_FPGAGRP_MODULE_EMAC 0x00000004 + #define EMAC_SPLITTER_CTRL_REG 0x0 #define EMAC_SPLITTER_CTRL_SPEED_MASK 0x3 #define EMAC_SPLITTER_CTRL_SPEED_10 0x2 @@ -148,7 +151,7 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac) int phymode = dwmac->interface; u32 reg_offset = dwmac->reg_offset; u32 reg_shift = dwmac->reg_shift; - u32 ctrl, val; + u32 ctrl, val, module; switch (phymode) { case PHY_INTERFACE_MODE_RGMII: @@ -175,12 +178,19 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac) ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift); ctrl |= val << reg_shift; - if (dwmac->f2h_ptp_ref_clk) + if (dwmac->f2h_ptp_ref_clk) { ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2); - else + regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, + &module); + module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2)); + regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, + module); + } else { ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2)); + } regmap_write(sys_mgr_base_addr, reg_offset, ctrl); + return 0; } -- cgit v0.10.2 From e3156048346c28c695f5cf9db67a8cf88c90f947 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 8 Apr 2016 15:12:24 +0200 Subject: iommu/amd: Fix checking of pci dma aliases Commit 61289cb ('iommu/amd: Remove old alias handling code') removed the old alias handling code from the AMD IOMMU driver because this is now handled by the IOMMU core code. But this also removed the handling of PCI aliases, which is not handled by the core code. This caused issues with PCI devices that have hidden PCIe-to-PCI bridges that rewrite the request-id. Fix this bug by re-introducing some of the removed functions from commit 61289cbaf6c8 and add a alias field 'struct iommu_dev_data'. This field carrys the return value of the get_alias() function and uses that instead of the amd_iommu_alias_table[] array in the code. Fixes: 61289cbaf6c8 ('iommu/amd: Remove old alias handling code') Cc: stable@vger.kernel.org # v4.4+ Tested-by: Tomasz Golinski Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 374c129..5efadad 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -92,6 +92,7 @@ struct iommu_dev_data { struct list_head dev_data_list; /* For global dev_data_list */ struct protection_domain *domain; /* Domain the device is bound to */ u16 devid; /* PCI Device ID */ + u16 alias; /* Alias Device ID */ bool iommu_v2; /* Device can make use of IOMMUv2 */ bool passthrough; /* Device is identity mapped */ struct { @@ -166,6 +167,13 @@ static struct protection_domain *to_pdomain(struct iommu_domain *dom) return container_of(dom, struct protection_domain, domain); } +static inline u16 get_device_id(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + return PCI_DEVID(pdev->bus->number, pdev->devfn); +} + static struct iommu_dev_data *alloc_dev_data(u16 devid) { struct iommu_dev_data *dev_data; @@ -203,6 +211,68 @@ out_unlock: return dev_data; } +static int __last_alias(struct pci_dev *pdev, u16 alias, void *data) +{ + *(u16 *)data = alias; + return 0; +} + +static u16 get_alias(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + u16 devid, ivrs_alias, pci_alias; + + devid = get_device_id(dev); + ivrs_alias = amd_iommu_alias_table[devid]; + pci_for_each_dma_alias(pdev, __last_alias, &pci_alias); + + if (ivrs_alias == pci_alias) + return ivrs_alias; + + /* + * DMA alias showdown + * + * The IVRS is fairly reliable in telling us about aliases, but it + * can't know about every screwy device. If we don't have an IVRS + * reported alias, use the PCI reported alias. In that case we may + * still need to initialize the rlookup and dev_table entries if the + * alias is to a non-existent device. + */ + if (ivrs_alias == devid) { + if (!amd_iommu_rlookup_table[pci_alias]) { + amd_iommu_rlookup_table[pci_alias] = + amd_iommu_rlookup_table[devid]; + memcpy(amd_iommu_dev_table[pci_alias].data, + amd_iommu_dev_table[devid].data, + sizeof(amd_iommu_dev_table[pci_alias].data)); + } + + return pci_alias; + } + + pr_info("AMD-Vi: Using IVRS reported alias %02x:%02x.%d " + "for device %s[%04x:%04x], kernel reported alias " + "%02x:%02x.%d\n", PCI_BUS_NUM(ivrs_alias), PCI_SLOT(ivrs_alias), + PCI_FUNC(ivrs_alias), dev_name(dev), pdev->vendor, pdev->device, + PCI_BUS_NUM(pci_alias), PCI_SLOT(pci_alias), + PCI_FUNC(pci_alias)); + + /* + * If we don't have a PCI DMA alias and the IVRS alias is on the same + * bus, then the IVRS table may know about a quirk that we don't. + */ + if (pci_alias == devid && + PCI_BUS_NUM(ivrs_alias) == pdev->bus->number) { + pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; + pdev->dma_alias_devfn = ivrs_alias & 0xff; + pr_info("AMD-Vi: Added PCI DMA alias %02x.%d for %s\n", + PCI_SLOT(ivrs_alias), PCI_FUNC(ivrs_alias), + dev_name(dev)); + } + + return ivrs_alias; +} + static struct iommu_dev_data *find_dev_data(u16 devid) { struct iommu_dev_data *dev_data; @@ -215,13 +285,6 @@ static struct iommu_dev_data *find_dev_data(u16 devid) return dev_data; } -static inline u16 get_device_id(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - - return PCI_DEVID(pdev->bus->number, pdev->devfn); -} - static struct iommu_dev_data *get_dev_data(struct device *dev) { return dev->archdata.iommu; @@ -349,6 +412,8 @@ static int iommu_init_device(struct device *dev) if (!dev_data) return -ENOMEM; + dev_data->alias = get_alias(dev); + if (pci_iommuv2_capable(pdev)) { struct amd_iommu *iommu; @@ -369,7 +434,7 @@ static void iommu_ignore_device(struct device *dev) u16 devid, alias; devid = get_device_id(dev); - alias = amd_iommu_alias_table[devid]; + alias = get_alias(dev); memset(&amd_iommu_dev_table[devid], 0, sizeof(struct dev_table_entry)); memset(&amd_iommu_dev_table[alias], 0, sizeof(struct dev_table_entry)); @@ -1061,7 +1126,7 @@ static int device_flush_dte(struct iommu_dev_data *dev_data) int ret; iommu = amd_iommu_rlookup_table[dev_data->devid]; - alias = amd_iommu_alias_table[dev_data->devid]; + alias = dev_data->alias; ret = iommu_flush_dte(iommu, dev_data->devid); if (!ret && alias != dev_data->devid) @@ -2039,7 +2104,7 @@ static void do_attach(struct iommu_dev_data *dev_data, bool ats; iommu = amd_iommu_rlookup_table[dev_data->devid]; - alias = amd_iommu_alias_table[dev_data->devid]; + alias = dev_data->alias; ats = dev_data->ats.enabled; /* Update data structures */ @@ -2073,7 +2138,7 @@ static void do_detach(struct iommu_dev_data *dev_data) return; iommu = amd_iommu_rlookup_table[dev_data->devid]; - alias = amd_iommu_alias_table[dev_data->devid]; + alias = dev_data->alias; /* decrease reference counters */ dev_data->domain->dev_iommu[iommu->index] -= 1; -- cgit v0.10.2 From ebf4dc2b1b2b9c8c7797f01a952bce3cf0247a4f Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Mon, 11 Apr 2016 11:07:58 +0530 Subject: cxgb4: Stop Rx Queues before freeing it up Stop all Ethernet RX Queues before freeing up various Ingress/Egress Queues, etc. We were seeing cases of Ingress Queues not getting serviced during the shutdown process leading to Ingress Paths jamming up through the chip and blocking the shutdown effort itself. One such case involved the Firmware sending a "Flush Token" through the ULP-TX -> ULP-RX path for an Ethernet TX Queue being freed in order to make sure there weren't any remaining TX Work Requests in the pipeline. But the return path was stalled by Ingress Data unable to be delivered to the Host because those Ingress Queues were no longer being serviced. Based on original work by Casey Leedom Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 984a3cc..326d400 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -1451,6 +1451,9 @@ int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, unsigned int mmd, unsigned int reg, u16 *valp); int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, unsigned int mmd, unsigned int reg, u16 val); +int t4_iq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int iqtype, unsigned int iqid, + unsigned int fl0id, unsigned int fl1id); int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int iqtype, unsigned int iqid, unsigned int fl0id, unsigned int fl1id); diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 13b144b..6278e5a 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -2981,14 +2981,28 @@ void t4_free_ofld_rxqs(struct adapter *adap, int n, struct sge_ofld_rxq *q) void t4_free_sge_resources(struct adapter *adap) { int i; - struct sge_eth_rxq *eq = adap->sge.ethrxq; - struct sge_eth_txq *etq = adap->sge.ethtxq; + struct sge_eth_rxq *eq; + struct sge_eth_txq *etq; + + /* stop all Rx queues in order to start them draining */ + for (i = 0; i < adap->sge.ethqsets; i++) { + eq = &adap->sge.ethrxq[i]; + if (eq->rspq.desc) + t4_iq_stop(adap, adap->mbox, adap->pf, 0, + FW_IQ_TYPE_FL_INT_CAP, + eq->rspq.cntxt_id, + eq->fl.size ? eq->fl.cntxt_id : 0xffff, + 0xffff); + } /* clean up Ethernet Tx/Rx queues */ - for (i = 0; i < adap->sge.ethqsets; i++, eq++, etq++) { + for (i = 0; i < adap->sge.ethqsets; i++) { + eq = &adap->sge.ethrxq[i]; if (eq->rspq.desc) free_rspq_fl(adap, &eq->rspq, eq->fl.size ? &eq->fl : NULL); + + etq = &adap->sge.ethtxq[i]; if (etq->q.desc) { t4_eth_eq_free(adap, adap->mbox, adap->pf, 0, etq->q.cntxt_id); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index cc1736b..520ffca 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -6940,6 +6940,39 @@ int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid, } /** + * t4_iq_stop - stop an ingress queue and its FLs + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queues + * @vf: the VF owning the queues + * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.) + * @iqid: ingress queue id + * @fl0id: FL0 queue id or 0xffff if no attached FL0 + * @fl1id: FL1 queue id or 0xffff if no attached FL1 + * + * Stops an ingress queue and its associated FLs, if any. This causes + * any current or future data/messages destined for these queues to be + * tossed. + */ +int t4_iq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int iqtype, unsigned int iqid, + unsigned int fl0id, unsigned int fl1id) +{ + struct fw_iq_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F | + FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) | + FW_IQ_CMD_VFN_V(vf)); + c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_IQSTOP_F | FW_LEN16(c)); + c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype)); + c.iqid = cpu_to_be16(iqid); + c.fl0id = cpu_to_be16(fl0id); + c.fl1id = cpu_to_be16(fl1id); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** * t4_iq_free - free an ingress queue and its FLs * @adap: the adapter * @mbox: mailbox to use for the FW command -- cgit v0.10.2 From 541726abe7daca64390c2ec34e6a203145f1686d Mon Sep 17 00:00:00 2001 From: Erik Hugne Date: Thu, 7 Apr 2016 10:40:43 -0400 Subject: tipc: make dist queue pernet Nametable updates received from the network that cannot be applied immediately are placed on a defer queue. This queue is global to the TIPC module, which might cause problems when using TIPC in containers. To prevent nametable updates from escaping into the wrong namespace, we make the queue pernet instead. Signed-off-by: Erik Hugne Signed-off-by: Jon Maloy Signed-off-by: David S. Miller diff --git a/net/tipc/core.c b/net/tipc/core.c index 03a8428..e2bdb07a 100644 --- a/net/tipc/core.c +++ b/net/tipc/core.c @@ -69,6 +69,7 @@ static int __net_init tipc_init_net(struct net *net) if (err) goto out_nametbl; + INIT_LIST_HEAD(&tn->dist_queue); err = tipc_topsrv_start(net); if (err) goto out_subscr; diff --git a/net/tipc/core.h b/net/tipc/core.h index 5504d63..eff58dc 100644 --- a/net/tipc/core.h +++ b/net/tipc/core.h @@ -103,6 +103,9 @@ struct tipc_net { spinlock_t nametbl_lock; struct name_table *nametbl; + /* Name dist queue */ + struct list_head dist_queue; + /* Topology subscription server */ struct tipc_server *topsrv; atomic_t subscription_count; diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c index ebe9d0f..4f4f581 100644 --- a/net/tipc/name_distr.c +++ b/net/tipc/name_distr.c @@ -40,11 +40,6 @@ int sysctl_tipc_named_timeout __read_mostly = 2000; -/** - * struct tipc_dist_queue - queue holding deferred name table updates - */ -static struct list_head tipc_dist_queue = LIST_HEAD_INIT(tipc_dist_queue); - struct distr_queue_item { struct distr_item i; u32 dtype; @@ -279,9 +274,11 @@ static bool tipc_update_nametbl(struct net *net, struct distr_item *i, * tipc_named_add_backlog - add a failed name table update to the backlog * */ -static void tipc_named_add_backlog(struct distr_item *i, u32 type, u32 node) +static void tipc_named_add_backlog(struct net *net, struct distr_item *i, + u32 type, u32 node) { struct distr_queue_item *e; + struct tipc_net *tn = net_generic(net, tipc_net_id); unsigned long now = get_jiffies_64(); e = kzalloc(sizeof(*e), GFP_ATOMIC); @@ -291,7 +288,7 @@ static void tipc_named_add_backlog(struct distr_item *i, u32 type, u32 node) e->node = node; e->expires = now + msecs_to_jiffies(sysctl_tipc_named_timeout); memcpy(e, i, sizeof(*i)); - list_add_tail(&e->next, &tipc_dist_queue); + list_add_tail(&e->next, &tn->dist_queue); } /** @@ -301,10 +298,11 @@ static void tipc_named_add_backlog(struct distr_item *i, u32 type, u32 node) void tipc_named_process_backlog(struct net *net) { struct distr_queue_item *e, *tmp; + struct tipc_net *tn = net_generic(net, tipc_net_id); char addr[16]; unsigned long now = get_jiffies_64(); - list_for_each_entry_safe(e, tmp, &tipc_dist_queue, next) { + list_for_each_entry_safe(e, tmp, &tn->dist_queue, next) { if (time_after(e->expires, now)) { if (!tipc_update_nametbl(net, &e->i, e->node, e->dtype)) continue; @@ -344,7 +342,7 @@ void tipc_named_rcv(struct net *net, struct sk_buff_head *inputq) node = msg_orignode(msg); while (count--) { if (!tipc_update_nametbl(net, item, node, mtype)) - tipc_named_add_backlog(item, mtype, node); + tipc_named_add_backlog(net, item, mtype, node); item++; } kfree_skb(skb); -- cgit v0.10.2 From ddb1d33969ef52687ad00f75eecf87029f62e382 Mon Sep 17 00:00:00 2001 From: Erik Hugne Date: Thu, 7 Apr 2016 10:40:44 -0400 Subject: tipc: purge deferred updates from dead nodes If a peer node becomes unavailable, in addition to removing the nametable entries from this node we also need to purge all deferred updates associated with this node. Signed-off-by: Erik Hugne Signed-off-by: Jon Maloy Signed-off-by: David S. Miller diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c index 4f4f581..6b626a6 100644 --- a/net/tipc/name_distr.c +++ b/net/tipc/name_distr.c @@ -224,12 +224,31 @@ static void tipc_publ_purge(struct net *net, struct publication *publ, u32 addr) kfree_rcu(p, rcu); } +/** + * tipc_dist_queue_purge - remove deferred updates from a node that went down + */ +static void tipc_dist_queue_purge(struct net *net, u32 addr) +{ + struct tipc_net *tn = net_generic(net, tipc_net_id); + struct distr_queue_item *e, *tmp; + + spin_lock_bh(&tn->nametbl_lock); + list_for_each_entry_safe(e, tmp, &tn->dist_queue, next) { + if (e->node != addr) + continue; + list_del(&e->next); + kfree(e); + } + spin_unlock_bh(&tn->nametbl_lock); +} + void tipc_publ_notify(struct net *net, struct list_head *nsub_list, u32 addr) { struct publication *publ, *tmp; list_for_each_entry_safe(publ, tmp, nsub_list, nodesub_list) tipc_publ_purge(net, publ, addr); + tipc_dist_queue_purge(net, addr); } /** -- cgit v0.10.2 From 9ab179d83b4e31ea277a123492e419067c2f129a Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 7 Apr 2016 11:10:06 -0700 Subject: net: vrf: Fix dst reference counting Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern Signed-off-by: David S. Miller diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 9a9fabb..8a8f1e5 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -60,41 +60,6 @@ struct pcpu_dstats { struct u64_stats_sync syncp; }; -static struct dst_entry *vrf_ip_check(struct dst_entry *dst, u32 cookie) -{ - return dst; -} - -static int vrf_ip_local_out(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - return ip_local_out(net, sk, skb); -} - -static unsigned int vrf_v4_mtu(const struct dst_entry *dst) -{ - /* TO-DO: return max ethernet size? */ - return dst->dev->mtu; -} - -static void vrf_dst_destroy(struct dst_entry *dst) -{ - /* our dst lives forever - or until the device is closed */ -} - -static unsigned int vrf_default_advmss(const struct dst_entry *dst) -{ - return 65535 - 40; -} - -static struct dst_ops vrf_dst_ops = { - .family = AF_INET, - .local_out = vrf_ip_local_out, - .check = vrf_ip_check, - .mtu = vrf_v4_mtu, - .destroy = vrf_dst_destroy, - .default_advmss = vrf_default_advmss, -}; - /* neighbor handling is done with actual device; do not want * to flip skb->dev for those ndisc packets. This really fails * for multiple next protocols (e.g., NEXTHDR_HOP). But it is @@ -349,46 +314,6 @@ static netdev_tx_t vrf_xmit(struct sk_buff *skb, struct net_device *dev) } #if IS_ENABLED(CONFIG_IPV6) -static struct dst_entry *vrf_ip6_check(struct dst_entry *dst, u32 cookie) -{ - return dst; -} - -static struct dst_ops vrf_dst_ops6 = { - .family = AF_INET6, - .local_out = ip6_local_out, - .check = vrf_ip6_check, - .mtu = vrf_v4_mtu, - .destroy = vrf_dst_destroy, - .default_advmss = vrf_default_advmss, -}; - -static int init_dst_ops6_kmem_cachep(void) -{ - vrf_dst_ops6.kmem_cachep = kmem_cache_create("vrf_ip6_dst_cache", - sizeof(struct rt6_info), - 0, - SLAB_HWCACHE_ALIGN, - NULL); - - if (!vrf_dst_ops6.kmem_cachep) - return -ENOMEM; - - return 0; -} - -static void free_dst_ops6_kmem_cachep(void) -{ - kmem_cache_destroy(vrf_dst_ops6.kmem_cachep); -} - -static int vrf_input6(struct sk_buff *skb) -{ - skb->dev->stats.rx_errors++; - kfree_skb(skb); - return 0; -} - /* modelled after ip6_finish_output2 */ static int vrf_finish_output6(struct net *net, struct sock *sk, struct sk_buff *skb) @@ -429,67 +354,34 @@ static int vrf_output6(struct net *net, struct sock *sk, struct sk_buff *skb) !(IP6CB(skb)->flags & IP6SKB_REROUTED)); } -static void vrf_rt6_destroy(struct net_vrf *vrf) +static void vrf_rt6_release(struct net_vrf *vrf) { - dst_destroy(&vrf->rt6->dst); - free_percpu(vrf->rt6->rt6i_pcpu); + dst_release(&vrf->rt6->dst); vrf->rt6 = NULL; } static int vrf_rt6_create(struct net_device *dev) { struct net_vrf *vrf = netdev_priv(dev); - struct dst_entry *dst; + struct net *net = dev_net(dev); struct rt6_info *rt6; - int cpu; int rc = -ENOMEM; - rt6 = dst_alloc(&vrf_dst_ops6, dev, 0, - DST_OBSOLETE_NONE, - (DST_HOST | DST_NOPOLICY | DST_NOXFRM)); + rt6 = ip6_dst_alloc(net, dev, + DST_HOST | DST_NOPOLICY | DST_NOXFRM | DST_NOCACHE); if (!rt6) goto out; - dst = &rt6->dst; - - rt6->rt6i_pcpu = alloc_percpu_gfp(struct rt6_info *, GFP_KERNEL); - if (!rt6->rt6i_pcpu) { - dst_destroy(dst); - goto out; - } - for_each_possible_cpu(cpu) { - struct rt6_info **p = per_cpu_ptr(rt6->rt6i_pcpu, cpu); - *p = NULL; - } - - memset(dst + 1, 0, sizeof(*rt6) - sizeof(*dst)); - - INIT_LIST_HEAD(&rt6->rt6i_siblings); - INIT_LIST_HEAD(&rt6->rt6i_uncached); - - rt6->dst.input = vrf_input6; rt6->dst.output = vrf_output6; - - rt6->rt6i_table = fib6_get_table(dev_net(dev), vrf->tb_id); - - atomic_set(&rt6->dst.__refcnt, 2); - + rt6->rt6i_table = fib6_get_table(net, vrf->tb_id); + dst_hold(&rt6->dst); vrf->rt6 = rt6; rc = 0; out: return rc; } #else -static int init_dst_ops6_kmem_cachep(void) -{ - return 0; -} - -static void free_dst_ops6_kmem_cachep(void) -{ -} - -static void vrf_rt6_destroy(struct net_vrf *vrf) +static void vrf_rt6_release(struct net_vrf *vrf) { } @@ -557,11 +449,11 @@ static int vrf_output(struct net *net, struct sock *sk, struct sk_buff *skb) !(IPCB(skb)->flags & IPSKB_REROUTED)); } -static void vrf_rtable_destroy(struct net_vrf *vrf) +static void vrf_rtable_release(struct net_vrf *vrf) { struct dst_entry *dst = (struct dst_entry *)vrf->rth; - dst_destroy(dst); + dst_release(dst); vrf->rth = NULL; } @@ -570,22 +462,10 @@ static struct rtable *vrf_rtable_create(struct net_device *dev) struct net_vrf *vrf = netdev_priv(dev); struct rtable *rth; - rth = dst_alloc(&vrf_dst_ops, dev, 2, - DST_OBSOLETE_NONE, - (DST_HOST | DST_NOPOLICY | DST_NOXFRM)); + rth = rt_dst_alloc(dev, 0, RTN_UNICAST, 1, 1, 0); if (rth) { rth->dst.output = vrf_output; - rth->rt_genid = rt_genid_ipv4(dev_net(dev)); - rth->rt_flags = 0; - rth->rt_type = RTN_UNICAST; - rth->rt_is_input = 0; - rth->rt_iif = 0; - rth->rt_pmtu = 0; - rth->rt_gateway = 0; - rth->rt_uses_gateway = 0; rth->rt_table_id = vrf->tb_id; - INIT_LIST_HEAD(&rth->rt_uncached); - rth->rt_uncached_list = NULL; } return rth; @@ -673,8 +553,8 @@ static void vrf_dev_uninit(struct net_device *dev) struct net_device *port_dev; struct list_head *iter; - vrf_rtable_destroy(vrf); - vrf_rt6_destroy(vrf); + vrf_rtable_release(vrf); + vrf_rt6_release(vrf); netdev_for_each_lower_dev(dev, port_dev, iter) vrf_del_slave(dev, port_dev); @@ -704,7 +584,7 @@ static int vrf_dev_init(struct net_device *dev) return 0; out_rth: - vrf_rtable_destroy(vrf); + vrf_rtable_release(vrf); out_stats: free_percpu(dev->dstats); dev->dstats = NULL; @@ -737,7 +617,7 @@ static struct rtable *vrf_get_rtable(const struct net_device *dev, struct net_vrf *vrf = netdev_priv(dev); rth = vrf->rth; - atomic_inc(&rth->dst.__refcnt); + dst_hold(&rth->dst); } return rth; @@ -788,7 +668,7 @@ static struct dst_entry *vrf_get_rt6_dst(const struct net_device *dev, struct net_vrf *vrf = netdev_priv(dev); rt = vrf->rt6; - atomic_inc(&rt->dst.__refcnt); + dst_hold(&rt->dst); } return (struct dst_entry *)rt; @@ -946,19 +826,6 @@ static int __init vrf_init_module(void) { int rc; - vrf_dst_ops.kmem_cachep = - kmem_cache_create("vrf_ip_dst_cache", - sizeof(struct rtable), 0, - SLAB_HWCACHE_ALIGN, - NULL); - - if (!vrf_dst_ops.kmem_cachep) - return -ENOMEM; - - rc = init_dst_ops6_kmem_cachep(); - if (rc != 0) - goto error2; - register_netdevice_notifier(&vrf_notifier_block); rc = rtnl_link_register(&vrf_link_ops); @@ -969,22 +836,10 @@ static int __init vrf_init_module(void) error: unregister_netdevice_notifier(&vrf_notifier_block); - free_dst_ops6_kmem_cachep(); -error2: - kmem_cache_destroy(vrf_dst_ops.kmem_cachep); return rc; } -static void __exit vrf_cleanup_module(void) -{ - rtnl_link_unregister(&vrf_link_ops); - unregister_netdevice_notifier(&vrf_notifier_block); - kmem_cache_destroy(vrf_dst_ops.kmem_cachep); - free_dst_ops6_kmem_cachep(); -} - module_init(vrf_init_module); -module_exit(vrf_cleanup_module); MODULE_AUTHOR("Shrijeet Mukherjee, David Ahern"); MODULE_DESCRIPTION("Device driver to instantiate VRF domains"); MODULE_LICENSE("GPL"); diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 295d291..54c7794 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -101,6 +101,9 @@ void fib6_force_start_gc(struct net *net); struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, const struct in6_addr *addr, bool anycast); +struct rt6_info *ip6_dst_alloc(struct net *net, struct net_device *dev, + int flags); + /* * support functions for ND * diff --git a/include/net/route.h b/include/net/route.h index 9b0a523..6de665b 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -209,6 +209,9 @@ unsigned int inet_addr_type_dev_table(struct net *net, void ip_rt_multicast_event(struct in_device *); int ip_rt_ioctl(struct net *, unsigned int cmd, void __user *arg); void ip_rt_get_source(u8 *src, struct sk_buff *skb, struct rtable *rt); +struct rtable *rt_dst_alloc(struct net_device *dev, + unsigned int flags, u16 type, + bool nopolicy, bool noxfrm, bool will_cache); struct in_ifaddr; void fib_add_ifaddr(struct in_ifaddr *); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 02c6229..2852bdf 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1438,9 +1438,9 @@ static void rt_set_nexthop(struct rtable *rt, __be32 daddr, #endif } -static struct rtable *rt_dst_alloc(struct net_device *dev, - unsigned int flags, u16 type, - bool nopolicy, bool noxfrm, bool will_cache) +struct rtable *rt_dst_alloc(struct net_device *dev, + unsigned int flags, u16 type, + bool nopolicy, bool noxfrm, bool will_cache) { struct rtable *rt; @@ -1468,6 +1468,7 @@ static struct rtable *rt_dst_alloc(struct net_device *dev, return rt; } +EXPORT_SYMBOL(rt_dst_alloc); /* called in rcu_read_lock() section */ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr, diff --git a/net/ipv6/route.c b/net/ipv6/route.c index ed44663..1d8871a 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -338,9 +338,9 @@ static struct rt6_info *__ip6_dst_alloc(struct net *net, return rt; } -static struct rt6_info *ip6_dst_alloc(struct net *net, - struct net_device *dev, - int flags) +struct rt6_info *ip6_dst_alloc(struct net *net, + struct net_device *dev, + int flags) { struct rt6_info *rt = __ip6_dst_alloc(net, dev, flags); @@ -364,6 +364,7 @@ static struct rt6_info *ip6_dst_alloc(struct net *net, return rt; } +EXPORT_SYMBOL(ip6_dst_alloc); static void ip6_dst_destroy(struct dst_entry *dst) { -- cgit v0.10.2 From 4f7f34eaab9f68c9bcd45386b15c414c38b40587 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 7 Apr 2016 11:10:41 -0700 Subject: net: vrf: Fix dev refcnt leak due to IPv6 prefix route ifupdown2 found a kernel bug with IPv6 routes and movement from the main table to the VRF table. Sequence of events: Create the interface and add addresses: ip link add dev eth4.105 link eth4 type vlan id 105 ip addr add dev eth4.105 8.105.105.10/24 ip -6 addr add dev eth4.105 2008:105:105::10/64 At this point IPv6 has inserted a prefix route in the main table even though the interface is 'down'. From there the VRF device is created: ip link add dev vrf105 type vrf table 105 ip addr add dev vrf105 9.9.105.10/32 ip -6 addr add dev vrf105 2000:9:105::10/128 ip link set vrf105 up Then the interface is enslaved, while still in the 'down' state: ip link set dev eth4.105 master vrf105 Since the device is down the VRF driver cycling the device does not send the NETDEV_UP and NETDEV_DOWN but rather the NETDEV_CHANGE event which does not flush the routes inserted prior. When the link is brought up ip link set dev eth4.105 up the prefix route is added in the VRF table, but does not remove the route from the main table. Fix by handling the NETDEV_CHANGEUPPER event similar what was implemented for IPv4 in 7f49e7a38b77 ("net: Flush local routes when device changes vrf association") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 27aed1a..2db2116 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3255,6 +3255,7 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, void *ptr) { struct net_device *dev = netdev_notifier_info_to_dev(ptr); + struct netdev_notifier_changeupper_info *info; struct inet6_dev *idev = __in6_dev_get(dev); int run_pending = 0; int err; @@ -3413,6 +3414,15 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, if (idev) addrconf_type_change(dev, event); break; + + case NETDEV_CHANGEUPPER: + info = ptr; + + /* flush all routes if dev is linked to or unlinked from + * an L3 master device (e.g., VRF) + */ + if (info->upper_dev && netif_is_l3_master(info->upper_dev)) + addrconf_ifdown(dev, 0); } return NOTIFY_OK; -- cgit v0.10.2 From 1ecf689013b598918cd9a261a078e64571b60f90 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 11 Apr 2016 13:39:08 -0700 Subject: devlink: add missing install of header The new devlink.h in uapi was not being installed by make headers_install Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index b71fd0b..813ffb2e 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -96,6 +96,7 @@ header-y += cyclades.h header-y += cycx_cfm.h header-y += dcbnl.h header-y += dccp.h +header-y += devlink.h header-y += dlmconstants.h header-y += dlm_device.h header-y += dlm.h -- cgit v0.10.2 From f0c8e1d9c4f473dfc771a613b602f1841afe8f8b Mon Sep 17 00:00:00 2001 From: "Subhransu S. Prusty" Date: Tue, 12 Apr 2016 10:31:23 +0530 Subject: ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral sampling rates FW expects sampling rate rounded up to next higher integer value when calculating ibs/obs. For example for 44.1k, it should be rounded up to 45 to calculate ibs/obs. Signed-off-by: Subhransu S. Prusty Signed-off-by: Vinod Koul Signed-off-by: Mark Brown diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 5a85f3a..cdb78b7 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -239,6 +239,7 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, { int multiplier = 1; struct skl_module_fmt *in_fmt, *out_fmt; + int in_rate, out_rate; /* Since fixups is applied to pin 0 only, ibs, obs needs @@ -249,15 +250,24 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) multiplier = 5; - mcfg->ibs = (in_fmt->s_freq / 1000) * - (mcfg->in_fmt->channels) * - (mcfg->in_fmt->bit_depth >> 3) * - multiplier; - - mcfg->obs = (mcfg->out_fmt->s_freq / 1000) * - (mcfg->out_fmt->channels) * - (mcfg->out_fmt->bit_depth >> 3) * - multiplier; + + if (in_fmt->s_freq % 1000) + in_rate = (in_fmt->s_freq / 1000) + 1; + else + in_rate = (in_fmt->s_freq / 1000); + + mcfg->ibs = in_rate * (mcfg->in_fmt->channels) * + (mcfg->in_fmt->bit_depth >> 3) * + multiplier; + + if (mcfg->out_fmt->s_freq % 1000) + out_rate = (mcfg->out_fmt->s_freq / 1000) + 1; + else + out_rate = (mcfg->out_fmt->s_freq / 1000); + + mcfg->obs = out_rate * (mcfg->out_fmt->channels) * + (mcfg->out_fmt->bit_depth >> 3) * + multiplier; } static int skl_tplg_update_be_blob(struct snd_soc_dapm_widget *w, -- cgit v0.10.2 From 8f815cdde3e550e10c2736990d791f60c2ce43eb Mon Sep 17 00:00:00 2001 From: Dmitry Ivanov Date: Wed, 6 Apr 2016 17:23:18 +0300 Subject: nl80211: check netlink protocol in socket release notification A non-privileged user can create a netlink socket with the same port_id as used by an existing open nl80211 netlink socket (e.g. as used by a hostapd process) with a different protocol number. Closing this socket will then lead to the notification going to nl80211's socket release notification handler, and possibly cause an action such as removing a virtual interface. Fix this issue by checking that the netlink protocol is NETLINK_GENERIC. Since generic netlink has no notifier chain of its own, we can't fix the problem more generically. Fixes: 026331c4d9b5 ("cfg80211/mac80211: allow registering for and sending action frames") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Ivanov [rewrite commit message] Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 98c9242..056a730 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -13216,7 +13216,7 @@ static int nl80211_netlink_notify(struct notifier_block * nb, struct wireless_dev *wdev; struct cfg80211_beacon_registration *reg, *tmp; - if (state != NETLINK_URELEASE) + if (state != NETLINK_URELEASE || notify->protocol != NETLINK_GENERIC) return NOTIFY_DONE; rcu_read_lock(); -- cgit v0.10.2 From b0b6d123f5df189d7d3a62d450e5f5c33ad614d8 Mon Sep 17 00:00:00 2001 From: Yakir Yang Date: Mon, 14 Mar 2016 11:09:15 +0800 Subject: i2c: rk3x: add support for rk3228 Enable the I2C core for this SoC. Signed-off-by: Yakir Yang Reviewed-by: Heiko Stuebner Acked-by: Rob Herring Signed-off-by: Wolfram Sang diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt index f0d71bc..0b4a85f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt @@ -6,8 +6,8 @@ RK3xxx SoCs. Required properties : - reg : Offset and length of the register set for the device - - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or - "rockchip,rk3288-i2c". + - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c", + "rockchip,rk3228-i2c" or "rockchip,rk3288-i2c". - interrupts : interrupt number - clocks : parent clock diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 9096d17..3dcc5f3 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -855,6 +855,7 @@ static struct rk3x_i2c_soc_data soc_data[3] = { static const struct of_device_id rk3x_i2c_match[] = { { .compatible = "rockchip,rk3066-i2c", .data = (void *)&soc_data[0] }, { .compatible = "rockchip,rk3188-i2c", .data = (void *)&soc_data[1] }, + { .compatible = "rockchip,rk3228-i2c", .data = (void *)&soc_data[2] }, { .compatible = "rockchip,rk3288-i2c", .data = (void *)&soc_data[2] }, {}, }; -- cgit v0.10.2 From 8574ad7800ad298dc7f184f12b454a67fa3dd839 Mon Sep 17 00:00:00 2001 From: Tanmay Jagdale Date: Mon, 11 Apr 2016 18:01:26 +0530 Subject: i2c: xlp9xx: add support for Broadcom Vulcan The Broadcom Vulcan ARM64 processor uses the same I2C controller present on the Broadcom XLP9xx/5xx MIPS processor family. Updated the Kconfig by adding ARCH_VULCAN option. Signed-off-by: Tanmay Jagdale Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index faa8e68..0967e1a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -975,10 +975,10 @@ config I2C_XLR config I2C_XLP9XX tristate "XLP9XX I2C support" - depends on CPU_XLP || COMPILE_TEST + depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST help This driver enables support for the on-chip I2C interface of - the Broadcom XLP9xx/XLP5xx MIPS processors. + the Broadcom XLP9xx/XLP5xx MIPS and Vulcan ARM64 processors. This driver can also be built as a module. If so, the module will be called i2c-xlp9xx. -- cgit v0.10.2 From abaa7b0c1286ca1610a6dfa079e1d2e27dca1f25 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 8 Apr 2016 15:41:08 +0300 Subject: i2c: ismt: Add Intel DNV PCI ID Intel DNV has the same iSMT SMBus host controller than Intel Avoton. Add DNV PCI ID to the list of supported devices. Signed-off-by: Mika Westerberg Acked-by: Andy Shevchenko Acked-by: Neil Horman Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 7ba795b..1c87077 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -75,6 +75,7 @@ /* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */ #define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59 #define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a +#define PCI_DEVICE_ID_INTEL_DNV_SMT 0x19ac #define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15 #define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */ @@ -180,6 +181,7 @@ struct ismt_priv { static const struct pci_device_id ismt_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) }, { 0, } }; -- cgit v0.10.2 From bcf4934288402be3464110109a4dae3bd6fb3e93 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 12 Apr 2016 01:31:14 +0200 Subject: netfilter: ebtables: Fix extension lookup with identical name If a requested extension exists as module and is not loaded, ebt_check_match() might accidentally use an NFPROTO_UNSPEC one with same name and fail. Reproduced with limit match: Given xt_limit and ebt_limit both built as module, the following would fail: modprobe xt_limit ebtables -I INPUT --limit 1/s -j ACCEPT The fix is to make ebt_check_match() distrust a found NFPROTO_UNSPEC extension and retry after requesting an appropriate module. Cc: Florian Westphal Signed-off-by: Phil Sutter Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 8570bc7..5a61f35 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -370,7 +370,11 @@ ebt_check_match(struct ebt_entry_match *m, struct xt_mtchk_param *par, left - sizeof(struct ebt_entry_match) < m->match_size) return -EINVAL; - match = xt_request_find_match(NFPROTO_BRIDGE, m->u.name, 0); + match = xt_find_match(NFPROTO_BRIDGE, m->u.name, 0); + if (IS_ERR(match) || match->family != NFPROTO_BRIDGE) { + request_module("ebt_%s", m->u.name); + match = xt_find_match(NFPROTO_BRIDGE, m->u.name, 0); + } if (IS_ERR(match)) return PTR_ERR(match); m->u.match = match; -- cgit v0.10.2 From fc26fe9c3869f02dd9dc54ff3a45c6d9d4bbbdfa Mon Sep 17 00:00:00 2001 From: Alexander Kurz Date: Mon, 11 Apr 2016 10:20:46 +0200 Subject: ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask With commit 7b91369b4655 ("mmc: sdhci: Set DMA mask when adding host") DMA access got disabled for device drivers with zero DMA mask property. sdhci-esdhc-imx got blocked from DMA access by this. Hence: initialize the DMA mask to enable access again. Signed-off-by: Alexander Kurz Signed-off-by: Shawn Guo diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index a5edd7d..3d039ef 100644 --- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -71,6 +71,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx( if (!pdata) pdata = &default_esdhc_pdata; - return imx_add_platform_device(data->devid, data->id, res, - ARRAY_SIZE(res), pdata, sizeof(*pdata)); + return imx_add_platform_device_dmamask(data->devid, data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata), + DMA_BIT_MASK(32)); } -- cgit v0.10.2 From d9c9f3b809d2bb0356f013e88d10730eafab5346 Mon Sep 17 00:00:00 2001 From: James Liao Date: Tue, 12 Apr 2016 16:34:30 +0800 Subject: Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators" This reverts commit cc8ed76938b5cf6a54ab3d60edabaf808dc960d1 ("soc: mediatek: SCPSYS: Fix double enabling of regulators") [1]. This patch fixes mt8173-evb failing boot issue. With commit [1], genpd state will not sync to real power domain state. So some resources such as clocks and regulators may stay in a wrong state. There is no regulator double enabling issue on mainline kernel, so we can refert commit [1] safely. Signed-off-by: James Liao Signed-off-by: Matthias Brugger diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index 57e781c..837effe 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c @@ -491,13 +491,14 @@ static int scpsys_probe(struct platform_device *pdev) genpd->dev_ops.active_wakeup = scpsys_active_wakeup; /* - * With CONFIG_PM disabled turn on all domains to make the - * hardware usable. + * Initially turn on all domains to make the domains usable + * with !CONFIG_PM and to get the hardware in sync with the + * software. The unused domains will be switched off during + * late_init time. */ - if (!IS_ENABLED(CONFIG_PM)) - genpd->power_on(genpd); + genpd->power_on(genpd); - pm_genpd_init(genpd, NULL, true); + pm_genpd_init(genpd, NULL, false); } /* -- cgit v0.10.2 From 0311c76e4722b8d6e5fa47eaee63c6552bcc74f5 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 24 Mar 2016 22:29:01 +0100 Subject: phy: rockchip-dp: should be a child device of the GRF The displayport-phy is fully enclosed in the general register files (GRF). Therefore as seen from the device-tree it shouldn't be a separate platform- device but instead a sub-device of the GRF - using the simply-mfd mechanism. The driver entered the kernel in the current merge-window, so we can still adapt the binding without needing a fallback, as the binding hasn't been released with a full kernel yet. While the edp phy is fully part of the GRF, it doesn't have any separate register set there, so doesn't get any register-area assigned. Signed-off-by: Heiko Stuebner Acked-by: Rob Herring Reviewed-by: Yakir Yang Signed-off-by: Kishon Vijay Abraham I diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt index 50c4f9b..e3b4809 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt @@ -8,15 +8,19 @@ Required properties: of memory mapped region. - clock-names: from common clock binding: Required elements: "24m" -- rockchip,grf: phandle to the syscon managing the "general register files" - #phy-cells : from the generic PHY bindings, must be 0; Example: -edp_phy: edp-phy { - compatible = "rockchip,rk3288-dp-phy"; - rockchip,grf = <&grf>; - clocks = <&cru SCLK_EDP_24M>; - clock-names = "24m"; - #phy-cells = <0>; +grf: syscon@ff770000 { + compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; + +... + + edp_phy: edp-phy { + compatible = "rockchip,rk3288-dp-phy"; + clocks = <&cru SCLK_EDP_24M>; + clock-names = "24m"; + #phy-cells = <0>; + }; }; diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c index 77e2d02..793ecb6 100644 --- a/drivers/phy/phy-rockchip-dp.c +++ b/drivers/phy/phy-rockchip-dp.c @@ -86,6 +86,9 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev) if (!np) return -ENODEV; + if (!dev->parent || !dev->parent->of_node) + return -ENODEV; + dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL); if (IS_ERR(dp)) return -ENOMEM; @@ -104,9 +107,9 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev) return ret; } - dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + dp->grf = syscon_node_to_regmap(dev->parent->of_node); if (IS_ERR(dp->grf)) { - dev_err(dev, "rk3288-dp needs rockchip,grf property\n"); + dev_err(dev, "rk3288-dp needs the General Register Files syscon\n"); return PTR_ERR(dp->grf); } -- cgit v0.10.2 From 332184adff50de9596f03735496c545e8bccc73e Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 24 Mar 2016 22:29:02 +0100 Subject: phy: rockchip-emmc: should be a child device of the GRF The emmc-phy is fully enclosed in the general register files (GRF). Therefore as seen from the device-tree it shouldn't be a separate platform- device but instead a sub-device of the GRF - using the simply-mfd mechanism. The driver entered the kernel in the current merge-window, so we can still adapt the binding without needing a fallback, as the binding hasn't been released with a full kernel yet. Signed-off-by: Heiko Stuebner Acked-by: Rob Herring Reviewed-by: Shawn Lin Signed-off-by: Kishon Vijay Abraham I diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt index 61916f1..461e958 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -3,17 +3,21 @@ Rockchip EMMC PHY Required properties: - compatible: rockchip,rk3399-emmc-phy - - rockchip,grf : phandle to the syscon managing the "general - register files" - #phy-cells: must be 0 - reg: PHY configure reg address offset in "general register files" Example: -emmcphy: phy { - compatible = "rockchip,rk3399-emmc-phy"; - rockchip,grf = <&grf>; - reg = <0xf780>; - #phy-cells = <0>; + +grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + +... + + emmcphy: phy@f780 { + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780>; + #phy-cells = <0>; + }; }; diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c index 887b4c2..6ebcf3e 100644 --- a/drivers/phy/phy-rockchip-emmc.c +++ b/drivers/phy/phy-rockchip-emmc.c @@ -176,7 +176,10 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev) struct regmap *grf; unsigned int reg_offset; - grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); + if (!dev->parent || !dev->parent->of_node) + return -ENODEV; + + grf = syscon_node_to_regmap(dev->parent->of_node); if (IS_ERR(grf)) { dev_err(dev, "Missing rockchip,grf property\n"); return PTR_ERR(grf); -- cgit v0.10.2 From 5128de85124c728cdbb6b35bd9dc7410f02c0ca1 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 24 Mar 2016 22:29:03 +0100 Subject: phy: rockchip-emmc: adapt binding to specifiy register offset and length The emmc-phy occupies a contiguous set of 8 registers inside the general register files, so the reg property should specify this. Signed-off-by: Heiko Stuebner Acked-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt index 461e958..555cb0f 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -4,7 +4,7 @@ Rockchip EMMC PHY Required properties: - compatible: rockchip,rk3399-emmc-phy - #phy-cells: must be 0 - - reg: PHY configure reg address offset in "general + - reg: PHY register address offset and length in "general register files" Example: @@ -12,12 +12,14 @@ Example: grf: syscon@ff770000 { compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; ... emmcphy: phy@f780 { compatible = "rockchip,rk3399-emmc-phy"; - reg = <0xf780>; + reg = <0xf780 0x20>; #phy-cells = <0>; }; }; -- cgit v0.10.2 From e7e0c3e26587749b62d17b9dd0532874186c77f7 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Sun, 3 Apr 2016 16:15:00 -0300 Subject: [media] videobuf2-core: Check user space planes array in dqbuf The number of planes in videobuf2 is specific to a buffer. In order to verify that the planes array provided by the user is long enough, a new vb2_buf_op is required. Call __verify_planes_array() when the dequeued buffer is known. Return an error to the caller if there was one, otherwise remove the buffer from the done list. Signed-off-by: Sakari Ailus Acked-by: Hans Verkuil Cc: stable@vger.kernel.org # for v4.4 and later Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 5d016f4..2169544 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1645,7 +1645,7 @@ static int __vb2_wait_for_done_vb(struct vb2_queue *q, int nonblocking) * Will sleep if required for nonblocking == false. */ static int __vb2_get_done_vb(struct vb2_queue *q, struct vb2_buffer **vb, - int nonblocking) + void *pb, int nonblocking) { unsigned long flags; int ret; @@ -1666,10 +1666,10 @@ static int __vb2_get_done_vb(struct vb2_queue *q, struct vb2_buffer **vb, /* * Only remove the buffer from done_list if v4l2_buffer can handle all * the planes. - * Verifying planes is NOT necessary since it already has been checked - * before the buffer is queued/prepared. So it can never fail. */ - list_del(&(*vb)->done_entry); + ret = call_bufop(q, verify_planes_array, *vb, pb); + if (!ret) + list_del(&(*vb)->done_entry); spin_unlock_irqrestore(&q->done_lock, flags); return ret; @@ -1748,7 +1748,7 @@ int vb2_core_dqbuf(struct vb2_queue *q, unsigned int *pindex, void *pb, struct vb2_buffer *vb = NULL; int ret; - ret = __vb2_get_done_vb(q, &vb, nonblocking); + ret = __vb2_get_done_vb(q, &vb, pb, nonblocking); if (ret < 0) return ret; diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index 8a0f55b..5342ff4 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -375,6 +375,9 @@ struct vb2_ops { /** * struct vb2_ops - driver-specific callbacks * + * @verify_planes_array: Verify that a given user space structure contains + * enough planes for the buffer. This is called + * for each dequeued buffer. * @fill_user_buffer: given a vb2_buffer fill in the userspace structure. * For V4L2 this is a struct v4l2_buffer. * @fill_vb2_buffer: given a userspace structure, fill in the vb2_buffer. @@ -384,6 +387,7 @@ struct vb2_ops { * the vb2_buffer struct. */ struct vb2_buf_ops { + int (*verify_planes_array)(struct vb2_buffer *vb, const void *pb); void (*fill_user_buffer)(struct vb2_buffer *vb, void *pb); int (*fill_vb2_buffer)(struct vb2_buffer *vb, const void *pb, struct vb2_plane *planes); -- cgit v0.10.2 From 2c1f6951a8a82e6de0d82b1158b5e493fc6c54ab Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Sun, 3 Apr 2016 16:31:03 -0300 Subject: [media] videobuf2-v4l2: Verify planes array in buffer dequeueing When a buffer is being dequeued using VIDIOC_DQBUF IOCTL, the exact buffer which will be dequeued is not known until the buffer has been removed from the queue. The number of planes is specific to a buffer, not to the queue. This does lead to the situation where multi-plane buffers may be requested and queued with n planes, but VIDIOC_DQBUF IOCTL may be passed an argument struct with fewer planes. __fill_v4l2_buffer() however uses the number of planes from the dequeued videobuf2 buffer, overwriting kernel memory (the m.planes array allocated in video_usercopy() in v4l2-ioctl.c) if the user provided fewer planes than the dequeued buffer had. Oops! Fixes: b0e0e1f83de3 ("[media] media: videobuf2: Prepare to divide videobuf2") Signed-off-by: Sakari Ailus Acked-by: Hans Verkuil Cc: stable@vger.kernel.org # for v4.4 and later Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/videobuf2-v4l2.c b/drivers/media/v4l2-core/videobuf2-v4l2.c index 91f5521..8da7470 100644 --- a/drivers/media/v4l2-core/videobuf2-v4l2.c +++ b/drivers/media/v4l2-core/videobuf2-v4l2.c @@ -74,6 +74,11 @@ static int __verify_planes_array(struct vb2_buffer *vb, const struct v4l2_buffer return 0; } +static int __verify_planes_array_core(struct vb2_buffer *vb, const void *pb) +{ + return __verify_planes_array(vb, pb); +} + /** * __verify_length() - Verify that the bytesused value for each plane fits in * the plane length and that the data offset doesn't exceed the bytesused value. @@ -437,6 +442,7 @@ static int __fill_vb2_buffer(struct vb2_buffer *vb, } static const struct vb2_buf_ops v4l2_buf_ops = { + .verify_planes_array = __verify_planes_array_core, .fill_user_buffer = __fill_v4l2_buffer, .fill_vb2_buffer = __fill_vb2_buffer, .copy_timestamp = __copy_timestamp, -- cgit v0.10.2 From a2abf904a6b594b93c0e73a36c98ecbaa7388463 Mon Sep 17 00:00:00 2001 From: Franklin S Cooper Jr Date: Thu, 10 Mar 2016 17:56:38 -0600 Subject: ARM: dts: am33xx: Fix GPMC dma properties This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: b5e509066074 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3") Signed-off-by: Franklin S Cooper Jr Acked-by: Roger Quadros Acked-by: Peter Ujfalusi Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 55ca9c7..0467846 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -860,7 +860,7 @@ ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; gpmc,num-cs = <7>; gpmc,num-waitpins = <2>; -- cgit v0.10.2 From 883cbc901b570625f54250a37b008d3635f1fbda Mon Sep 17 00:00:00 2001 From: Franklin S Cooper Jr Date: Thu, 10 Mar 2016 17:56:39 -0600 Subject: ARM: dts: am437x: Fix GPMC dma properties This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: cce1ee000187 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Signed-off-by: Franklin S Cooper Jr Acked-by: Roger Quadros Acked-by: Peter Ujfalusi Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 344b861..ba580a9 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -884,7 +884,7 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; clocks = <&l3s_gclk>; clock-names = "fck"; -- cgit v0.10.2 From a1def45365594dd16be0d8cc52b0d5a6a79d6ae6 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 6 Apr 2016 17:32:38 +0300 Subject: ARM: dts: am57xx-beagle-x15: remove extcon_usb1 USB1 controller is hardwired to be used as Host only port so we don't need to check ID pin state and can get rid of extcon_usb1. This also reduces USB1 controller's and so eSATA power's dependency with EXTCON. This fixes eSATA port with multi_v7_defconfig. Cc: Franklin S Cooper Jr. Cc: Vagrant Cascadian Signed-off-by: Roger Quadros Tested-by: Franklin S Cooper Jr. [tony@atomide.com: updated to describe what it fixes] Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 0a5fc5d..4168eb9 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -99,13 +99,6 @@ #cooling-cells = <2>; }; - extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&extcon_usb1_pins>; - }; - hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -349,12 +342,6 @@ >; }; - extcon_usb1_pins: extcon_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ - >; - }; - tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ @@ -706,10 +693,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; -- cgit v0.10.2 From a6d37131c02f15463daa00e2f1da6824e8e00de2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 8 Apr 2016 13:28:42 +0200 Subject: net: ethernet: renesas: ravb_main: test clock rate to avoid division by 0 The clk API may return 0 on clk_get_rate, so we should check the result before using it as a divisor. Signed-off-by: Wolfram Sang Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 087e14a..9e2a0bd 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1691,6 +1691,9 @@ static int ravb_set_gti(struct net_device *ndev) rate = clk_get_rate(clk); clk_put(clk); + if (!rate) + return -EINVAL; + inc = 1000000000ULL << 20; do_div(inc, rate); -- cgit v0.10.2 From 70af921db6f8835f4b11c65731116560adb00c14 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Fri, 8 Apr 2016 12:01:21 -0700 Subject: net: ipv6: Do not keep linklocal and loopback addresses f1705ec197e7 added the option to retain user configured addresses on an admin down. A comment to one of the later revisions suggested using the IFA_F_PERMANENT flag rather than adding a user_managed boolean to the ifaddr struct. A side effect of this change is that link local and loopback addresses are also retained which is not part of the objective of f1705ec197e7. Add check to drop those addresses. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: David Ahern Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 2db2116..23cec53 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3448,6 +3448,12 @@ static void addrconf_type_change(struct net_device *dev, unsigned long event) ipv6_mc_unmap(idev); } +static bool addr_is_local(const struct in6_addr *addr) +{ + return ipv6_addr_type(addr) & + (IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK); +} + static int addrconf_ifdown(struct net_device *dev, int how) { struct net *net = dev_net(dev); @@ -3505,7 +3511,8 @@ restart: * address is retained on a down event */ if (!keep_addr || - !(ifa->flags & IFA_F_PERMANENT)) { + !(ifa->flags & IFA_F_PERMANENT) || + addr_is_local(&ifa->addr)) { hlist_del_init_rcu(&ifa->addr_lst); goto restart; } @@ -3554,7 +3561,8 @@ restart: write_unlock_bh(&idev->lock); spin_lock_bh(&ifa->lock); - if (keep_addr && (ifa->flags & IFA_F_PERMANENT)) { + if (keep_addr && (ifa->flags & IFA_F_PERMANENT) && + !addr_is_local(&ifa->addr)) { /* set state to skip the notifier below */ state = INET6_IFADDR_STATE_DEAD; ifa->state = 0; -- cgit v0.10.2 From 3f3f7cb875c0f621485644d4fd7453b0d37f00e4 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 30 Mar 2016 16:15:37 -0700 Subject: i40e/i40evf: Limit TSO to 7 descriptors for payload instead of 8 per packet This patch addresses a bug introduced based on my interpretation of the XL710 datasheet. Specifically section 8.4.1 states that "A single transmit packet may span up to 8 buffers (up to 8 data descriptors per packet including both the header and payload buffers)." It then later goes on to say that each segment for a TSO obeys the previous rule, however it then refers to TSO header and the segment payload buffers. I believe the actual limit for fragments with TSO and a skbuff that has payload data in the header portion of the buffer is actually only 7 fragments as the skb->data portion counts as 2 buffers, one for the TSO header, and one for a segment payload buffer. Fixes: 2d37490b82af ("i40e/i40evf: Rewrite logic for 8 descriptor per packet check") Reported-by: Sowmini Varadhan Signed-off-by: Alexander Duyck Acked-by: Jesse Brandeburg Tested-by: Sowmini Varadhan Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 084d0ab..6a49b7a 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2594,35 +2594,34 @@ int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size) } /** - * __i40e_chk_linearize - Check if there are more than 8 fragments per packet + * __i40e_chk_linearize - Check if there are more than 8 buffers per packet * @skb: send buffer * - * Note: Our HW can't scatter-gather more than 8 fragments to build - * a packet on the wire and so we need to figure out the cases where we - * need to linearize the skb. + * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire + * and so we need to figure out the cases where we need to linearize the skb. + * + * For TSO we need to count the TSO header and segment payload separately. + * As such we need to check cases where we have 7 fragments or more as we + * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for + * the segment payload in the first descriptor, and another 7 for the + * fragments. **/ bool __i40e_chk_linearize(struct sk_buff *skb) { const struct skb_frag_struct *frag, *stale; - int gso_size, nr_frags, sum; - - /* check to see if TSO is enabled, if so we may get a repreive */ - gso_size = skb_shinfo(skb)->gso_size; - if (unlikely(!gso_size)) - return true; + int nr_frags, sum; - /* no need to check if number of frags is less than 8 */ + /* no need to check if number of frags is less than 7 */ nr_frags = skb_shinfo(skb)->nr_frags; - if (nr_frags < I40E_MAX_BUFFER_TXD) + if (nr_frags < (I40E_MAX_BUFFER_TXD - 1)) return false; /* We need to walk through the list and validate that each group * of 6 fragments totals at least gso_size. However we don't need - * to perform such validation on the first or last 6 since the first - * 6 cannot inherit any data from a descriptor before them, and the - * last 6 cannot inherit any data from a descriptor after them. + * to perform such validation on the last 6 since the last 6 cannot + * inherit any data from a descriptor after them. */ - nr_frags -= I40E_MAX_BUFFER_TXD - 1; + nr_frags -= I40E_MAX_BUFFER_TXD - 2; frag = &skb_shinfo(skb)->frags[0]; /* Initialize size to the negative value of gso_size minus 1. We @@ -2631,21 +2630,21 @@ bool __i40e_chk_linearize(struct sk_buff *skb) * descriptors for a single transmit as the header and previous * fragment are already consuming 2 descriptors. */ - sum = 1 - gso_size; + sum = 1 - skb_shinfo(skb)->gso_size; - /* Add size of frags 1 through 5 to create our initial sum */ - sum += skb_frag_size(++frag); - sum += skb_frag_size(++frag); - sum += skb_frag_size(++frag); - sum += skb_frag_size(++frag); - sum += skb_frag_size(++frag); + /* Add size of frags 0 through 4 to create our initial sum */ + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ stale = &skb_shinfo(skb)->frags[0]; for (;;) { - sum += skb_frag_size(++frag); + sum += skb_frag_size(frag++); /* if sum is negative we failed to make sufficient progress */ if (sum < 0) @@ -2655,7 +2654,7 @@ bool __i40e_chk_linearize(struct sk_buff *skb) if (!--nr_frags) break; - sum -= skb_frag_size(++stale); + sum -= skb_frag_size(stale++); } return false; diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index cdd5dc0..a9bd705 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -413,10 +413,14 @@ static inline int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size) **/ static inline bool i40e_chk_linearize(struct sk_buff *skb, int count) { - /* we can only support up to 8 data buffers for a single send */ - if (likely(count <= I40E_MAX_BUFFER_TXD)) + /* Both TSO and single send will work if count is less than 8 */ + if (likely(count < I40E_MAX_BUFFER_TXD)) return false; - return __i40e_chk_linearize(skb); + if (skb_is_gso(skb)) + return __i40e_chk_linearize(skb); + + /* we can support up to 8 data buffers for a single send */ + return count != I40E_MAX_BUFFER_TXD; } #endif /* _I40E_TXRX_H_ */ diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index ebcc25c..cea97da 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1796,35 +1796,34 @@ static void i40e_create_tx_ctx(struct i40e_ring *tx_ring, } /** - * __i40evf_chk_linearize - Check if there are more than 8 fragments per packet + * __i40evf_chk_linearize - Check if there are more than 8 buffers per packet * @skb: send buffer * - * Note: Our HW can't scatter-gather more than 8 fragments to build - * a packet on the wire and so we need to figure out the cases where we - * need to linearize the skb. + * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire + * and so we need to figure out the cases where we need to linearize the skb. + * + * For TSO we need to count the TSO header and segment payload separately. + * As such we need to check cases where we have 7 fragments or more as we + * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for + * the segment payload in the first descriptor, and another 7 for the + * fragments. **/ bool __i40evf_chk_linearize(struct sk_buff *skb) { const struct skb_frag_struct *frag, *stale; - int gso_size, nr_frags, sum; - - /* check to see if TSO is enabled, if so we may get a repreive */ - gso_size = skb_shinfo(skb)->gso_size; - if (unlikely(!gso_size)) - return true; + int nr_frags, sum; - /* no need to check if number of frags is less than 8 */ + /* no need to check if number of frags is less than 7 */ nr_frags = skb_shinfo(skb)->nr_frags; - if (nr_frags < I40E_MAX_BUFFER_TXD) + if (nr_frags < (I40E_MAX_BUFFER_TXD - 1)) return false; /* We need to walk through the list and validate that each group * of 6 fragments totals at least gso_size. However we don't need - * to perform such validation on the first or last 6 since the first - * 6 cannot inherit any data from a descriptor before them, and the - * last 6 cannot inherit any data from a descriptor after them. + * to perform such validation on the last 6 since the last 6 cannot + * inherit any data from a descriptor after them. */ - nr_frags -= I40E_MAX_BUFFER_TXD - 1; + nr_frags -= I40E_MAX_BUFFER_TXD - 2; frag = &skb_shinfo(skb)->frags[0]; /* Initialize size to the negative value of gso_size minus 1. We @@ -1833,21 +1832,21 @@ bool __i40evf_chk_linearize(struct sk_buff *skb) * descriptors for a single transmit as the header and previous * fragment are already consuming 2 descriptors. */ - sum = 1 - gso_size; + sum = 1 - skb_shinfo(skb)->gso_size; - /* Add size of frags 1 through 5 to create our initial sum */ - sum += skb_frag_size(++frag); - sum += skb_frag_size(++frag); - sum += skb_frag_size(++frag); - sum += skb_frag_size(++frag); - sum += skb_frag_size(++frag); + /* Add size of frags 0 through 4 to create our initial sum */ + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ stale = &skb_shinfo(skb)->frags[0]; for (;;) { - sum += skb_frag_size(++frag); + sum += skb_frag_size(frag++); /* if sum is negative we failed to make sufficient progress */ if (sum < 0) @@ -1857,7 +1856,7 @@ bool __i40evf_chk_linearize(struct sk_buff *skb) if (!--nr_frags) break; - sum -= skb_frag_size(++stale); + sum -= skb_frag_size(stale++); } return false; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h index c1dd8c5..0429553 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h @@ -395,10 +395,14 @@ static inline int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size) **/ static inline bool i40e_chk_linearize(struct sk_buff *skb, int count) { - /* we can only support up to 8 data buffers for a single send */ - if (likely(count <= I40E_MAX_BUFFER_TXD)) + /* Both TSO and single send will work if count is less than 8 */ + if (likely(count < I40E_MAX_BUFFER_TXD)) return false; - return __i40evf_chk_linearize(skb); + if (skb_is_gso(skb)) + return __i40evf_chk_linearize(skb); + + /* we can support up to 8 data buffers for a single send */ + return count != I40E_MAX_BUFFER_TXD; } #endif /* _I40E_TXRX_H_ */ -- cgit v0.10.2 From b821646826e22f0491708768fccce58eef3f5704 Mon Sep 17 00:00:00 2001 From: Emrah Demir Date: Fri, 8 Apr 2016 22:16:11 +0300 Subject: mISDN: Fixing missing validation in base_sock_bind() Add validation code into mISDN/socket.c Signed-off-by: Emrah Demir Signed-off-by: David S. Miller diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index 0d29b5a..99e5f97 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -715,6 +715,9 @@ base_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len) if (!maddr || maddr->family != AF_ISDN) return -EINVAL; + if (addr_len < sizeof(struct sockaddr_mISDN)) + return -EINVAL; + lock_sock(sk); if (_pms(sk)->dev) { -- cgit v0.10.2 From 65c66af6609f0e76617184b40efea8eea1aae505 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 8 Apr 2016 13:37:27 -0700 Subject: net: thunderx: Fix broken of_node_put() code. commit b7d3e3d3d21a ("net: thunderx: Don't leak phy device references on -EPROBE_DEFER condition.") incorrectly moved the call to of_node_put() outside of the loop. Under normal loop exit, the node has already had of_node_put() called, so the extra call results in: [ 8.228020] ERROR: Bad of_node_put() on /soc@0/pci@848000000000/mrml-bridge0@1,0/bgx0/xlaui00 [ 8.239433] CPU: 16 PID: 608 Comm: systemd-udevd Not tainted 4.6.0-rc1-numa+ #157 [ 8.247380] Hardware name: www.cavium.com EBB8800/EBB8800, BIOS 0.3 Mar 2 2016 [ 8.273541] Call trace: [ 8.273550] [] dump_backtrace+0x0/0x210 [ 8.273557] [] show_stack+0x24/0x2c [ 8.273560] [] dump_stack+0x8c/0xb4 [ 8.273566] [] of_node_release+0xa8/0xac [ 8.273570] [] kobject_cleanup+0x8c/0x194 [ 8.273573] [] kobject_put+0x44/0x6c [ 8.273576] [] of_node_put+0x24/0x30 [ 8.273587] [] bgx_probe+0x17c/0xcd8 [thunder_bgx] [ 8.273591] [] pci_device_probe+0xa0/0x114 [ 8.273596] [] driver_probe_device+0x178/0x418 [ 8.273599] [] __driver_attach+0x100/0x118 [ 8.273602] [] bus_for_each_dev+0x6c/0xac [ 8.273605] [] driver_attach+0x30/0x38 [ 8.273608] [] bus_add_driver+0x1f8/0x29c [ 8.273611] [] driver_register+0x70/0x110 [ 8.273617] [] __pci_register_driver+0x60/0x6c [ 8.273623] [] bgx_init_module+0x40/0x48 [thunder_bgx] [ 8.273626] [] do_one_initcall+0xcc/0x1c0 [ 8.273631] [] do_init_module+0x68/0x1c8 [ 8.273635] [] load_module+0xf44/0x11f4 [ 8.273638] [] SyS_finit_module+0xb8/0xe0 [ 8.273641] [] el0_svc_naked+0x24/0x28 Go back to the previous (correct) code that only did the extra of_node_put() call on early exit from the loop. Signed-off-by: David Daney Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 9679515..d20539a 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -1011,10 +1011,11 @@ static int bgx_init_of_phy(struct bgx *bgx) } lmac++; - if (lmac == MAX_LMAC_PER_BGX) + if (lmac == MAX_LMAC_PER_BGX) { + of_node_put(node); break; + } } - of_node_put(node); return 0; defer: -- cgit v0.10.2 From f808c5dbcdc393be8e9f676c61baac6a3db382c1 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Thu, 31 Mar 2016 09:52:30 -0700 Subject: fm10k: fix multi-bit VLAN update requests from VF The VF uses a multi-bit update request to clear unused VLANs whenever it resets. However, an accident in a previous refector broke multi-bit updates for VFs, due to misreading a comment in fm10k_vf.c and attempting to reduce code duplication. The problem occurs because a multi-bit request has a non-zero length, and the PF would simply drop any request with the upper 16 bits set. We can't simply remove the check of the upper 16 bits and the call to fm10k_iov_select vid, because this would remove the checks for default VID and for ensuring no other VLANs can be enabled except pf_vid when it has been set. To resolve that issue, this revision uses the iov_select_vid when we have a single-bit update, and denies any multi-bit update when the VLAN was administratively set by the PF. This should be ok since the PF properly updates VLAN_TABLE when it assigns the PF vid. This ensures that requests to add or remove the PF vid work as expected, but a rogue VF could not use the multi-bit update as a loophole to attempt receiving traffic on other VLANs. Reported-by: Ngai-Mint Kwan Signed-off-by: Jacob Keller Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c index 62ccebc..8cf943d 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c @@ -1223,18 +1223,32 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, if (err) return err; - /* verify upper 16 bits are zero */ - if (vid >> 16) - return FM10K_ERR_PARAM; - set = !(vid & FM10K_VLAN_CLEAR); vid &= ~FM10K_VLAN_CLEAR; - err = fm10k_iov_select_vid(vf_info, (u16)vid); - if (err < 0) - return err; + /* if the length field has been set, this is a multi-bit + * update request. For multi-bit requests, simply disallow + * them when the pf_vid has been set. In this case, the PF + * should have already cleared the VLAN_TABLE, and if we + * allowed them, it could allow a rogue VF to receive traffic + * on a VLAN it was not assigned. In the single-bit case, we + * need to modify requests for VLAN 0 to use the default PF or + * SW vid when assigned. + */ - vid = err; + if (vid >> 16) { + /* prevent multi-bit requests when PF has + * administratively set the VLAN for this VF + */ + if (vf_info->pf_vid) + return FM10K_ERR_PARAM; + } else { + err = fm10k_iov_select_vid(vf_info, (u16)vid); + if (err < 0) + return err; + + vid = err; + } /* update VSI info for VF in regards to VLAN table */ err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set); -- cgit v0.10.2 From d6d5e999e5df67f8ec20b6be45e2229455ee3699 Mon Sep 17 00:00:00 2001 From: Chris Friesen Date: Fri, 8 Apr 2016 15:21:30 -0600 Subject: route: do not cache fib route info on local routes with oif For local routes that require a particular output interface we do not want to cache the result. Caching the result causes incorrect behaviour when there are multiple source addresses on the interface. The end result being that if the intended recipient is waiting on that interface for the packet he won't receive it because it will be delivered on the loopback interface and the IP_PKTINFO ipi_ifindex will be set to the loopback interface as well. This can be tested by running a program such as "dhcp_release" which attempts to inject a packet on a particular interface so that it is received by another program on the same board. The receiving process should see an IP_PKTINFO ipi_ifndex value of the source interface (e.g., eth1) instead of the loopback interface (e.g., lo). The packet will still appear on the loopback interface in tcpdump but the important aspect is that the CMSG info is correct. Sample dhcp_release command line: dhcp_release eth1 192.168.204.222 02:11:33:22:44:66 Signed-off-by: Allain Legacy Signed off-by: Chris Friesen Reviewed-by: Julian Anastasov Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 2852bdf..60398a9 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2046,6 +2046,18 @@ static struct rtable *__mkroute_output(const struct fib_result *res, */ if (fi && res->prefixlen < 4) fi = NULL; + } else if ((type == RTN_LOCAL) && (orig_oif != 0) && + (orig_oif != dev_out->ifindex)) { + /* For local routes that require a particular output interface + * we do not want to cache the result. Caching the result + * causes incorrect behaviour when there are multiple source + * addresses on the interface, the end result being that if the + * intended recipient is waiting on that interface for the + * packet he won't receive it because it will be delivered on + * the loopback interface and the IP_PKTINFO ipi_ifindex will + * be set to the loopback interface as well. + */ + fi = NULL; } fnhe = NULL; -- cgit v0.10.2 From 7403c515c49c033fec33df0814fffdc977e6acdc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 13 Apr 2016 12:08:27 -0400 Subject: drm/radeon: fix initial connector audio value This got lost somewhere along the way. This fixes audio not working until set_property was called. Noticed-by: Hyungwon Hwang Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index cfcc099..81a63d7 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -2002,10 +2002,12 @@ radeon_add_atom_connector(struct drm_device *dev, rdev->mode_info.dither_property, RADEON_FMT_DITHER_DISABLE); - if (radeon_audio != 0) + if (radeon_audio != 0) { drm_object_attach_property(&radeon_connector->base.base, rdev->mode_info.audio_property, RADEON_AUDIO_AUTO); + radeon_connector->audio = RADEON_AUDIO_AUTO; + } if (ASIC_IS_DCE5(rdev)) drm_object_attach_property(&radeon_connector->base.base, rdev->mode_info.output_csc_property, @@ -2130,6 +2132,7 @@ radeon_add_atom_connector(struct drm_device *dev, drm_object_attach_property(&radeon_connector->base.base, rdev->mode_info.audio_property, RADEON_AUDIO_AUTO); + radeon_connector->audio = RADEON_AUDIO_AUTO; } if (connector_type == DRM_MODE_CONNECTOR_DVII) { radeon_connector->dac_load_detect = true; @@ -2185,6 +2188,7 @@ radeon_add_atom_connector(struct drm_device *dev, drm_object_attach_property(&radeon_connector->base.base, rdev->mode_info.audio_property, RADEON_AUDIO_AUTO); + radeon_connector->audio = RADEON_AUDIO_AUTO; } if (ASIC_IS_DCE5(rdev)) drm_object_attach_property(&radeon_connector->base.base, @@ -2237,6 +2241,7 @@ radeon_add_atom_connector(struct drm_device *dev, drm_object_attach_property(&radeon_connector->base.base, rdev->mode_info.audio_property, RADEON_AUDIO_AUTO); + radeon_connector->audio = RADEON_AUDIO_AUTO; } if (ASIC_IS_DCE5(rdev)) drm_object_attach_property(&radeon_connector->base.base, -- cgit v0.10.2 From 85cc88f02eb0ecf44493c1b2ebb6f206cd5fc321 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 12 Apr 2016 19:25:52 +0800 Subject: drm/amdgpu: when suspending, if uvd/vce was running. need to cancel delay work. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix the issue that when resume back, uvd/vce dpm was disabled and uvd/vce's performace dropped. Signed-off-by: Rex Zhu Reviewed-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index 338da80..8d035b6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -255,6 +255,8 @@ int amdgpu_uvd_suspend(struct amdgpu_device *adev) if (i == AMDGPU_MAX_UVD_HANDLES) return 0; + cancel_delayed_work_sync(&adev->uvd.idle_work); + size = amdgpu_bo_size(adev->uvd.vcpu_bo); ptr = adev->uvd.cpu_addr; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c index 4bec0c1..481a64f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c @@ -234,6 +234,7 @@ int amdgpu_vce_suspend(struct amdgpu_device *adev) if (i == AMDGPU_MAX_VCE_HANDLES) return 0; + cancel_delayed_work_sync(&adev->vce.idle_work); /* TODO: suspending running encoding sessions isn't supported */ return -EINVAL; } -- cgit v0.10.2 From 309cf37fe2a781279b7675d4bb7173198e532867 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 10 Apr 2016 12:52:28 +0200 Subject: packet: fix heap info leak in PACKET_DIAG_MCLIST sock_diag interface Because we miss to wipe the remainder of i->addr[] in packet_mc_add(), pdiag_put_mclist() leaks uninitialized heap bytes via the PACKET_DIAG_MCLIST netlink attribute. Fix this by explicitly memset(0)ing the remaining bytes in i->addr[]. Fixes: eea68e2f1a00 ("packet: Report socket mclist info via diag module") Signed-off-by: Mathias Krause Cc: Eric W. Biederman Cc: Pavel Emelyanov Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index f12c17f..18d0bec 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -3521,6 +3521,7 @@ static int packet_mc_add(struct sock *sk, struct packet_mreq_max *mreq) i->ifindex = mreq->mr_ifindex; i->alen = mreq->mr_alen; memcpy(i->addr, mreq->mr_address, i->alen); + memset(i->addr + i->alen, 0, sizeof(i->addr) - i->alen); i->count = 1; i->next = po->mclist; po->mclist = i; -- cgit v0.10.2 From 3dcd493fbebfd631913df6e2773cc295d3bf7d22 Mon Sep 17 00:00:00 2001 From: Lars Persson Date: Tue, 12 Apr 2016 08:45:52 +0200 Subject: net: sched: do not requeue a NULL skb A failure in validate_xmit_skb_list() triggered an unconditional call to dev_requeue_skb with skb=NULL. This slowly grows the queue discipline's qlen count until all traffic through the queue stops. We take the optimistic approach and continue running the queue after a failure since it is unknown if later packets also will fail in the validate path. Fixes: 55a93b3ea780 ("qdisc: validate skb without holding lock") Signed-off-by: Lars Persson Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index f18c350..80742ed 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -159,12 +159,15 @@ int sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q, if (validate) skb = validate_xmit_skb_list(skb, dev); - if (skb) { + if (likely(skb)) { HARD_TX_LOCK(dev, txq, smp_processor_id()); if (!netif_xmit_frozen_or_stopped(txq)) skb = dev_hard_start_xmit(skb, dev, txq, &ret); HARD_TX_UNLOCK(dev, txq); + } else { + spin_lock(root_lock); + return qdisc_qlen(q); } spin_lock(root_lock); -- cgit v0.10.2 From d82bccc69041a51f7b7b9b4a36db0772f4cdba21 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Tue, 12 Apr 2016 10:26:19 -0700 Subject: bpf/verifier: reject invalid LD_ABS | BPF_DW instruction verifier must check for reserved size bits in instruction opcode and reject BPF_LD | BPF_ABS | BPF_DW and BPF_LD | BPF_IND | BPF_DW instructions, otherwise interpreter will WARN_RATELIMIT on them during execution. Fixes: ddd872bc3098 ("bpf: verifier: add checks for BPF_ABS | BPF_IND instructions") Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 2e08f8e..618ef77 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1374,6 +1374,7 @@ static int check_ld_abs(struct verifier_env *env, struct bpf_insn *insn) } if (insn->dst_reg != BPF_REG_0 || insn->off != 0 || + BPF_SIZE(insn->code) == BPF_DW || (mode == BPF_ABS && insn->src_reg != BPF_REG_0)) { verbose("BPF_LD_ABS uses reserved fields\n"); return -EINVAL; -- cgit v0.10.2 From 6dd22a116614acf33aeef13861e32510ef9d5392 Mon Sep 17 00:00:00 2001 From: Alexander Kurz Date: Sun, 10 Apr 2016 20:41:38 +0200 Subject: pinctrl: imx: Kconfig: PINCTRL_IMX select REGMAP Regmap functionality has been integrated into pinctrl-imx.c with commit 8626ada8 which might trigger build failures when regmap is not selected otherwise. Hence, make Kconfig aware about this new dependency. Signed-off-by: Alexander Kurz Acked-by: Philipp Zabel Acked-by: Shawn Guo Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig index debe121..fc8cbf6 100644 --- a/drivers/pinctrl/freescale/Kconfig +++ b/drivers/pinctrl/freescale/Kconfig @@ -2,6 +2,7 @@ config PINCTRL_IMX bool select PINMUX select PINCONF + select REGMAP config PINCTRL_IMX1_CORE bool -- cgit v0.10.2 From 1560d15861769c23fd981e2d60dc7fd790b21e1e Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Wed, 13 Apr 2016 20:49:48 -0500 Subject: ARM: OMAP3: Fix external abort on 36xx waking from off mode idle Depending on timing during the resume path from off mode on 36xx, we may see external aborts. These seem to be caused by the following: - OMAP3 Advisory 1.62 "MPU Cannot Exit from Standby" says we need to disable intc autoidle before WFI - DM3730 Advisory 1.106 "MPU Leaves MSTANDBY State Before IDLEREQ of Interrupt Controller is Released" says we need to wait before accessing intc omap3_intc_resume_idle restores the intc autoidle for all resume paths, however in the resume path from off mode only it is also being restored by omap_intc_restore_context before this call to omap3_intc_resume_idle happens. The second restore of the intc autoidle in this path is what appears to be causing the external abort so for the off mode resume path let's rely on omap_intc_restore_context to restore intc autoidle, and for all other paths let omap3_intc_resume_idle handle it as it is now. Signed-off-by: Dave Gerlach Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2dbd378..d44e0e2 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -198,7 +198,6 @@ void omap_sram_idle(void) int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; int per_going_off; - int core_prev_state; u32 sdrc_pwr = 0; mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); @@ -278,16 +277,20 @@ void omap_sram_idle(void) sdrc_write_reg(sdrc_pwr, SDRC_POWER); /* CORE */ - if (core_next_state < PWRDM_POWER_ON) { - core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); - if (core_prev_state == PWRDM_POWER_OFF) { - omap3_core_restore_context(); - omap3_cm_restore_context(); - omap3_sram_restore_context(); - omap2_sms_restore_context(); - } + if (core_next_state < PWRDM_POWER_ON && + pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) { + omap3_core_restore_context(); + omap3_cm_restore_context(); + omap3_sram_restore_context(); + omap2_sms_restore_context(); + } else { + /* + * In off-mode resume path above, omap3_core_restore_context + * also handles the INTC autoidle restore done here so limit + * this to non-off mode resume paths so we don't do it twice. + */ + omap3_intc_resume_idle(); } - omap3_intc_resume_idle(); pwrdm_post_transition(NULL); -- cgit v0.10.2 From f1d0540db6a21395a58268f4392c7420ebae8c1d Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 12 Apr 2016 08:35:18 +0200 Subject: net: mediatek: update the IRQ part of the binding document The current binding document only describes a single interrupt. Update the document by adding the 2 other interrupts. The driver currently only uses a single interrupt. The HW is however able to using IRQ grouping to split TX and RX onto separate GIC irqs. Signed-off-by: John Crispin Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Signed-off-by: David S. Miller diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 5ca7929..32eaaca 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -9,7 +9,8 @@ have dual GMAC each represented by a child node.. Required properties: - compatible: Should be "mediatek,mt7623-eth" - reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt +- interrupts: Should contain the three frame engines interrupts in numeric + order. These are fe_int0, fe_int1 and fe_int2. - clocks: the clock used by the core - clock-names: the names of the clock listed in the clocks property. These are "ethif", "esw", "gp2", "gp1" @@ -42,7 +43,9 @@ eth: ethernet@1b100000 { <ðsys CLK_ETHSYS_GP2>, <ðsys CLK_ETHSYS_GP1>; clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = ; + interrupts = ; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; resets = <ðsys MT2701_ETHSYS_ETH_RST>; reset-names = "eth"; -- cgit v0.10.2 From 80fbdb208f37740774652ba095a5b2045205ed59 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Mon, 11 Apr 2016 15:29:34 -0700 Subject: ipv6: datagram: Refactor flowi6 init codes to a new function Move flowi6 init codes for connected datagram sk to a newly created function ip6_datagram_flow_key_init(). Notes: 1. fl6_flowlabel is used instead of fl6.flowlabel in __ip6_datagram_connect 2. ipv6_addr_is_multicast(&fl6->daddr) is used instead of (addr_type & IPV6_ADDR_MULTICAST) in ip6_datagram_flow_key_init() This new function will be reused during pmtu update in the later patch. Signed-off-by: Martin KaFai Lau Cc: Cong Wang Cc: Eric Dumazet Cc: Wei Wang Signed-off-by: David S. Miller diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 4281621..f07c1dd 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -40,6 +40,30 @@ static bool ipv6_mapped_addr_any(const struct in6_addr *a) return ipv6_addr_v4mapped(a) && (a->s6_addr32[3] == 0); } +static void ip6_datagram_flow_key_init(struct flowi6 *fl6, struct sock *sk) +{ + struct inet_sock *inet = inet_sk(sk); + struct ipv6_pinfo *np = inet6_sk(sk); + + memset(fl6, 0, sizeof(*fl6)); + fl6->flowi6_proto = sk->sk_protocol; + fl6->daddr = sk->sk_v6_daddr; + fl6->saddr = np->saddr; + fl6->flowi6_oif = sk->sk_bound_dev_if; + fl6->flowi6_mark = sk->sk_mark; + fl6->fl6_dport = inet->inet_dport; + fl6->fl6_sport = inet->inet_sport; + fl6->flowlabel = np->flow_label; + + if (!fl6->flowi6_oif) + fl6->flowi6_oif = np->sticky_pktinfo.ipi6_ifindex; + + if (!fl6->flowi6_oif && ipv6_addr_is_multicast(&fl6->daddr)) + fl6->flowi6_oif = np->mcast_oif; + + security_sk_classify_flow(sk, flowi6_to_flowi(fl6)); +} + static int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) { struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr; @@ -52,6 +76,7 @@ static int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int a struct ipv6_txoptions *opt; int addr_type; int err; + __be32 fl6_flowlabel = 0; if (usin->sin6_family == AF_INET) { if (__ipv6_only_sock(sk)) @@ -66,11 +91,10 @@ static int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int a if (usin->sin6_family != AF_INET6) return -EAFNOSUPPORT; - memset(&fl6, 0, sizeof(fl6)); if (np->sndflow) { - fl6.flowlabel = usin->sin6_flowinfo&IPV6_FLOWINFO_MASK; - if (fl6.flowlabel&IPV6_FLOWLABEL_MASK) { - flowlabel = fl6_sock_lookup(sk, fl6.flowlabel); + fl6_flowlabel = usin->sin6_flowinfo & IPV6_FLOWINFO_MASK; + if (fl6_flowlabel & IPV6_FLOWLABEL_MASK) { + flowlabel = fl6_sock_lookup(sk, fl6_flowlabel); if (!flowlabel) return -EINVAL; } @@ -145,7 +169,7 @@ ipv4_connected: } sk->sk_v6_daddr = *daddr; - np->flow_label = fl6.flowlabel; + np->flow_label = fl6_flowlabel; inet->inet_dport = usin->sin6_port; @@ -154,21 +178,7 @@ ipv4_connected: * destination cache for it. */ - fl6.flowi6_proto = sk->sk_protocol; - fl6.daddr = sk->sk_v6_daddr; - fl6.saddr = np->saddr; - fl6.flowi6_oif = sk->sk_bound_dev_if; - fl6.flowi6_mark = sk->sk_mark; - fl6.fl6_dport = inet->inet_dport; - fl6.fl6_sport = inet->inet_sport; - - if (!fl6.flowi6_oif) - fl6.flowi6_oif = np->sticky_pktinfo.ipi6_ifindex; - - if (!fl6.flowi6_oif && (addr_type&IPV6_ADDR_MULTICAST)) - fl6.flowi6_oif = np->mcast_oif; - - security_sk_classify_flow(sk, flowi6_to_flowi(&fl6)); + ip6_datagram_flow_key_init(&fl6, sk); rcu_read_lock(); opt = flowlabel ? flowlabel->opt : rcu_dereference(np->opt); -- cgit v0.10.2 From 7e2040db1539a904924b997a14ebd3de53172100 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Mon, 11 Apr 2016 15:29:35 -0700 Subject: ipv6: datagram: Refactor dst lookup and update codes to a new function This patch moves the route lookup and update codes for connected datagram sk to a newly created function ip6_datagram_dst_update() It will be reused during the pmtu update in the later patch. Signed-off-by: Martin KaFai Lau Cc: Cong Wang Cc: Eric Dumazet Cc: Wei Wang Signed-off-by: David S. Miller diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index f07c1dd..669585e 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -64,16 +64,65 @@ static void ip6_datagram_flow_key_init(struct flowi6 *fl6, struct sock *sk) security_sk_classify_flow(sk, flowi6_to_flowi(fl6)); } +static int ip6_datagram_dst_update(struct sock *sk) +{ + struct ip6_flowlabel *flowlabel = NULL; + struct in6_addr *final_p, final; + struct ipv6_txoptions *opt; + struct dst_entry *dst; + struct inet_sock *inet = inet_sk(sk); + struct ipv6_pinfo *np = inet6_sk(sk); + struct flowi6 fl6; + int err = 0; + + if (np->sndflow && (np->flow_label & IPV6_FLOWLABEL_MASK)) { + flowlabel = fl6_sock_lookup(sk, np->flow_label); + if (!flowlabel) + return -EINVAL; + } + ip6_datagram_flow_key_init(&fl6, sk); + + rcu_read_lock(); + opt = flowlabel ? flowlabel->opt : rcu_dereference(np->opt); + final_p = fl6_update_dst(&fl6, opt, &final); + rcu_read_unlock(); + + dst = ip6_dst_lookup_flow(sk, &fl6, final_p); + if (IS_ERR(dst)) { + err = PTR_ERR(dst); + goto out; + } + + if (ipv6_addr_any(&np->saddr)) + np->saddr = fl6.saddr; + + if (ipv6_addr_any(&sk->sk_v6_rcv_saddr)) { + sk->sk_v6_rcv_saddr = fl6.saddr; + inet->inet_rcv_saddr = LOOPBACK4_IPV6; + if (sk->sk_prot->rehash) + sk->sk_prot->rehash(sk); + } + + ip6_dst_store(sk, dst, + ipv6_addr_equal(&fl6.daddr, &sk->sk_v6_daddr) ? + &sk->sk_v6_daddr : NULL, +#ifdef CONFIG_IPV6_SUBTREES + ipv6_addr_equal(&fl6.saddr, &np->saddr) ? + &np->saddr : +#endif + NULL); + +out: + fl6_sock_release(flowlabel); + return err; +} + static int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) { struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr; struct inet_sock *inet = inet_sk(sk); struct ipv6_pinfo *np = inet6_sk(sk); - struct in6_addr *daddr, *final_p, final; - struct dst_entry *dst; - struct flowi6 fl6; - struct ip6_flowlabel *flowlabel = NULL; - struct ipv6_txoptions *opt; + struct in6_addr *daddr; int addr_type; int err; __be32 fl6_flowlabel = 0; @@ -91,14 +140,8 @@ static int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int a if (usin->sin6_family != AF_INET6) return -EAFNOSUPPORT; - if (np->sndflow) { + if (np->sndflow) fl6_flowlabel = usin->sin6_flowinfo & IPV6_FLOWINFO_MASK; - if (fl6_flowlabel & IPV6_FLOWLABEL_MASK) { - flowlabel = fl6_sock_lookup(sk, fl6_flowlabel); - if (!flowlabel) - return -EINVAL; - } - } addr_type = ipv6_addr_type(&usin->sin6_addr); @@ -178,45 +221,13 @@ ipv4_connected: * destination cache for it. */ - ip6_datagram_flow_key_init(&fl6, sk); - - rcu_read_lock(); - opt = flowlabel ? flowlabel->opt : rcu_dereference(np->opt); - final_p = fl6_update_dst(&fl6, opt, &final); - rcu_read_unlock(); - - dst = ip6_dst_lookup_flow(sk, &fl6, final_p); - err = 0; - if (IS_ERR(dst)) { - err = PTR_ERR(dst); + err = ip6_datagram_dst_update(sk); + if (err) goto out; - } - - /* source address lookup done in ip6_dst_lookup */ - - if (ipv6_addr_any(&np->saddr)) - np->saddr = fl6.saddr; - - if (ipv6_addr_any(&sk->sk_v6_rcv_saddr)) { - sk->sk_v6_rcv_saddr = fl6.saddr; - inet->inet_rcv_saddr = LOOPBACK4_IPV6; - if (sk->sk_prot->rehash) - sk->sk_prot->rehash(sk); - } - - ip6_dst_store(sk, dst, - ipv6_addr_equal(&fl6.daddr, &sk->sk_v6_daddr) ? - &sk->sk_v6_daddr : NULL, -#ifdef CONFIG_IPV6_SUBTREES - ipv6_addr_equal(&fl6.saddr, &np->saddr) ? - &np->saddr : -#endif - NULL); sk->sk_state = TCP_ESTABLISHED; sk_set_txhash(sk); out: - fl6_sock_release(flowlabel); return err; } -- cgit v0.10.2 From 33c162a980fe03498fcecb917f618ad7e7c55e61 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Mon, 11 Apr 2016 15:29:36 -0700 Subject: ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update There is a case in connected UDP socket such that getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible sequence could be the following: 1. Create a connected UDP socket 2. Send some datagrams out 3. Receive a ICMPV6_PKT_TOOBIG 4. No new outgoing datagrams to trigger the sk_dst_check() logic to update the sk->sk_dst_cache. 5. getsockopt(IPV6_MTU) returns the mtu from the invalid sk->sk_dst_cache instead of the newly created RTF_CACHE clone. This patch updates the sk->sk_dst_cache for a connected datagram sk during pmtu-update code path. Note that the sk->sk_v6_daddr is used to do the route lookup instead of skb->data (i.e. iph). It is because a UDP socket can become connected after sending out some datagrams in un-connected state. or It can be connected multiple times to different destinations. Hence, iph may not be related to where sk is currently connected to. It is done under '!sock_owned_by_user(sk)' condition because the user may make another ip6_datagram_connect() (i.e changing the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update code path. For the sock_owned_by_user(sk) == true case, the next patch will introduce a release_cb() which will update the sk->sk_dst_cache. Test: Server (Connected UDP Socket): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Route Details: [root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac' 2fac::/64 dev eth0 proto kernel metric 256 pref medium 2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium A simple python code to create a connected UDP socket: import socket import errno HOST = '2fac::1' PORT = 8080 s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) s.bind((HOST, PORT)) s.connect(('2fac:face::face', 53)) print("connected") while True: try: data = s.recv(1024) except socket.error as se: if se.errno == errno.EMSGSIZE: pmtu = s.getsockopt(41, 24) print("PMTU:%d" % pmtu) break s.close() Python program output after getting a ICMPV6_PKT_TOOBIG: [root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py connected PMTU:1300 Cache routes after recieving TOOBIG: [root@arch-fb-vm1 ~]# ip -6 r show table cache 2fac:face::face via 2fac::face dev eth0 metric 0 cache expires 463sec mtu 1300 pref medium Client (Send the ICMPV6_PKT_TOOBIG): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scapy is used to generate the TOOBIG message. Here is the scapy script I have used: >>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac:: 1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53) >>> sendp(p, iface='qemubr0') Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau Reported-by: Wei Wang Cc: Cong Wang Cc: Eric Dumazet Cc: Wei Wang Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index d0aeb97..fd02e90 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -959,6 +959,7 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, int ip6_datagram_connect(struct sock *sk, struct sockaddr *addr, int addr_len); int ip6_datagram_connect_v6_only(struct sock *sk, struct sockaddr *addr, int addr_len); +int ip6_datagram_dst_update(struct sock *sk, bool fix_sk_saddr); int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len); diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 669585e..59e01f27 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -64,7 +64,7 @@ static void ip6_datagram_flow_key_init(struct flowi6 *fl6, struct sock *sk) security_sk_classify_flow(sk, flowi6_to_flowi(fl6)); } -static int ip6_datagram_dst_update(struct sock *sk) +int ip6_datagram_dst_update(struct sock *sk, bool fix_sk_saddr) { struct ip6_flowlabel *flowlabel = NULL; struct in6_addr *final_p, final; @@ -93,14 +93,16 @@ static int ip6_datagram_dst_update(struct sock *sk) goto out; } - if (ipv6_addr_any(&np->saddr)) - np->saddr = fl6.saddr; + if (fix_sk_saddr) { + if (ipv6_addr_any(&np->saddr)) + np->saddr = fl6.saddr; - if (ipv6_addr_any(&sk->sk_v6_rcv_saddr)) { - sk->sk_v6_rcv_saddr = fl6.saddr; - inet->inet_rcv_saddr = LOOPBACK4_IPV6; - if (sk->sk_prot->rehash) - sk->sk_prot->rehash(sk); + if (ipv6_addr_any(&sk->sk_v6_rcv_saddr)) { + sk->sk_v6_rcv_saddr = fl6.saddr; + inet->inet_rcv_saddr = LOOPBACK4_IPV6; + if (sk->sk_prot->rehash) + sk->sk_prot->rehash(sk); + } } ip6_dst_store(sk, dst, @@ -221,7 +223,7 @@ ipv4_connected: * destination cache for it. */ - err = ip6_datagram_dst_update(sk); + err = ip6_datagram_dst_update(sk, true); if (err) goto out; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 1d8871a..d916d6a 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1418,8 +1418,20 @@ EXPORT_SYMBOL_GPL(ip6_update_pmtu); void ip6_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, __be32 mtu) { + struct dst_entry *dst; + ip6_update_pmtu(skb, sock_net(sk), mtu, sk->sk_bound_dev_if, sk->sk_mark); + + dst = __sk_dst_get(sk); + if (!dst || !dst->obsolete || + dst->ops->check(dst, inet6_sk(sk)->dst_cookie)) + return; + + bh_lock_sock(sk); + if (!sock_owned_by_user(sk) && !ipv6_addr_v4mapped(&sk->sk_v6_daddr)) + ip6_datagram_dst_update(sk, false); + bh_unlock_sock(sk); } EXPORT_SYMBOL_GPL(ip6_sk_update_pmtu); -- cgit v0.10.2 From e646b657f6983017783914a951039e323120dc55 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Mon, 11 Apr 2016 15:29:37 -0700 Subject: ipv6: udp: Do a route lookup and update during release_cb This patch adds a release_cb for UDPv6. It does a route lookup and updates sk->sk_dst_cache if it is needed. It picks up the left-over job from ip6_sk_update_pmtu() if the sk was owned by user during the pmtu update. It takes a rcu_read_lock to protect the __sk_dst_get() operations because another thread may do ip6_dst_store() without taking the sk lock (e.g. sendmsg). Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau Reported-by: Wei Wang Cc: Cong Wang Cc: Eric Dumazet Cc: Wei Wang Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index fd02e90..1be050a 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -960,6 +960,7 @@ int ip6_datagram_connect(struct sock *sk, struct sockaddr *addr, int addr_len); int ip6_datagram_connect_v6_only(struct sock *sk, struct sockaddr *addr, int addr_len); int ip6_datagram_dst_update(struct sock *sk, bool fix_sk_saddr); +void ip6_datagram_release_cb(struct sock *sk); int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len); diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 59e01f27..9dd3882 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -119,6 +119,26 @@ out: return err; } +void ip6_datagram_release_cb(struct sock *sk) +{ + struct dst_entry *dst; + + if (ipv6_addr_v4mapped(&sk->sk_v6_daddr)) + return; + + rcu_read_lock(); + dst = __sk_dst_get(sk); + if (!dst || !dst->obsolete || + dst->ops->check(dst, inet6_sk(sk)->dst_cookie)) { + rcu_read_unlock(); + return; + } + rcu_read_unlock(); + + ip6_datagram_dst_update(sk, false); +} +EXPORT_SYMBOL_GPL(ip6_datagram_release_cb); + static int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) { struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 8125931..6bc5c66 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1539,6 +1539,7 @@ struct proto udpv6_prot = { .sendmsg = udpv6_sendmsg, .recvmsg = udpv6_recvmsg, .backlog_rcv = __udpv6_queue_rcv_skb, + .release_cb = ip6_datagram_release_cb, .hash = udp_lib_hash, .unhash = udp_lib_unhash, .rehash = udp_v6_rehash, -- cgit v0.10.2 From b4dfd8e92956b396d3438212bc9a0be6267b8b34 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 12 Apr 2016 13:30:45 +0200 Subject: bgmac: reset & enable Ethernet core before using it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes Ethernet on D-Link DIR-885L with BCM47094 SoC. Felix reported similar fix was needed for his BCM4709 device (Buffalo WXR-1900DHP?). I tested this for regressions on BCM4706, BCM4708A0 and BCM47081A0. Cc: Felix Fietkau Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 99b30a9..38db2e4 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1572,6 +1572,11 @@ static int bgmac_probe(struct bcma_device *core) dev_warn(&core->dev, "Using random MAC: %pM\n", mac); } + /* This (reset &) enable is not preset in specs or reference driver but + * Broadcom does it in arch PCI code when enabling fake PCI device. + */ + bcma_core_enable(core, 0); + /* Allocation and references */ net_dev = alloc_etherdev(sizeof(*bgmac)); if (!net_dev) -- cgit v0.10.2 From c5b5343cfbc9f46af65033fa4f407d7b7d98371d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 12 Apr 2016 16:11:12 +0200 Subject: cdc_mbim: apply "NDP to end" quirk to all Huawei devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We now have a positive report of another Huawei device needing this quirk: The ME906s-158 (12d1:15c1). This is an m.2 form factor modem with no obvious relationship to the E3372 (12d1:157d) we already have a quirk entry for. This is reason enough to believe the quirk might be necessary for any number of current and future Huawei devices. Applying the quirk to all Huawei devices, since it is crucial to any device affected by the firmware bug, while the impact on non-affected devices is negligible. The quirk can if necessary be disabled per-device by writing N to /sys/class/net//cdc_ncm/ndp_to_end Reported-by: Andreas Fett Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index bdd83d9..96a5028 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -617,8 +617,13 @@ static const struct usb_device_id mbim_devs[] = { { USB_VENDOR_AND_INTERFACE_INFO(0x0bdb, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&cdc_mbim_info, }, - /* Huawei E3372 fails unless NDP comes after the IP packets */ - { USB_DEVICE_AND_INTERFACE_INFO(0x12d1, 0x157d, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), + + /* Some Huawei devices, ME906s-158 (12d1:15c1) and E3372 + * (12d1:157d), are known to fail unless the NDP is placed + * after the IP packets. Applying the quirk to all Huawei + * devices is broader than necessary, but harmless. + */ + { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end, }, /* default entry */ -- cgit v0.10.2 From d894ba18d4e449b3a7f6eb491f16c9e02933736e Mon Sep 17 00:00:00 2001 From: Craig Gallek Date: Tue, 12 Apr 2016 13:11:25 -0400 Subject: soreuseport: fix ordering for mixed v4/v6 sockets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the SO_REUSEPORT socket option, it is possible to create sockets in the AF_INET and AF_INET6 domains which are bound to the same IPv4 address. This is only possible with SO_REUSEPORT and when not using IPV6_V6ONLY on the AF_INET6 sockets. Prior to the commits referenced below, an incoming IPv4 packet would always be routed to a socket of type AF_INET when this mixed-mode was used. After those changes, the same packet would be routed to the most recently bound socket (if this happened to be an AF_INET6 socket, it would have an IPv4 mapped IPv6 address). The change in behavior occurred because the recent SO_REUSEPORT optimizations short-circuit the socket scoring logic as soon as they find a match. They did not take into account the scoring logic that favors AF_INET sockets over AF_INET6 sockets in the event of a tie. To fix this problem, this patch changes the insertion order of AF_INET and AF_INET6 addresses in the TCP and UDP socket lists when the sockets have SO_REUSEPORT set. AF_INET sockets will be inserted at the head of the list and AF_INET6 sockets with SO_REUSEPORT set will always be inserted at the tail of the list. This will force AF_INET sockets to always be considered first. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Fixes: 125e80b88687 ("soreuseport: fast reuseport TCP socket selection") Reported-by: Maciej Żenczykowski Signed-off-by: Craig Gallek Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index 1c33dd7..4ae95f7 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -98,6 +98,45 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, if (!is_a_nulls(first)) first->pprev = &n->next; } + +/** + * hlist_nulls_add_tail_rcu + * @n: the element to add to the hash list. + * @h: the list to add to. + * + * Description: + * Adds the specified element to the end of the specified hlist_nulls, + * while permitting racing traversals. NOTE: tail insertion requires + * list traversal. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_nulls_add_head_rcu() + * or hlist_nulls_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency + * problems on Alpha CPUs. Regardless of the type of CPU, the + * list-traversal primitive must be guarded by rcu_read_lock(). + */ +static inline void hlist_nulls_add_tail_rcu(struct hlist_nulls_node *n, + struct hlist_nulls_head *h) +{ + struct hlist_nulls_node *i, *last = NULL; + + for (i = hlist_nulls_first_rcu(h); !is_a_nulls(i); + i = hlist_nulls_next_rcu(i)) + last = i; + + if (last) { + n->next = last->next; + n->pprev = &last->next; + rcu_assign_pointer(hlist_nulls_next_rcu(last), n); + } else { + hlist_nulls_add_head_rcu(n, h); + } +} + /** * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type * @tpos: the type * to use as a loop cursor. diff --git a/include/net/sock.h b/include/net/sock.h index 255d3e0..121ffc1 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -630,7 +630,11 @@ static inline void sk_add_node_rcu(struct sock *sk, struct hlist_head *list) static inline void __sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list) { - hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list); + if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport && + sk->sk_family == AF_INET6) + hlist_nulls_add_tail_rcu(&sk->sk_nulls_node, list); + else + hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list); } static inline void sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 08eed5e..a2e7f55 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -339,8 +339,13 @@ found: hslot2 = udp_hashslot2(udptable, udp_sk(sk)->udp_portaddr_hash); spin_lock(&hslot2->lock); - hlist_nulls_add_head_rcu(&udp_sk(sk)->udp_portaddr_node, - &hslot2->head); + if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport && + sk->sk_family == AF_INET6) + hlist_nulls_add_tail_rcu(&udp_sk(sk)->udp_portaddr_node, + &hslot2->head); + else + hlist_nulls_add_head_rcu(&udp_sk(sk)->udp_portaddr_node, + &hslot2->head); hslot2->count++; spin_unlock(&hslot2->lock); } -- cgit v0.10.2 From d6a61f80b8718abbb82dcfc95d56404e3218e7b0 Mon Sep 17 00:00:00 2001 From: Craig Gallek Date: Tue, 12 Apr 2016 13:11:26 -0400 Subject: soreuseport: test mixed v4/v6 sockets Test to validate the behavior of SO_REUSEPORT sockets that are created with both AF_INET and AF_INET6. See the commit prior to this for a description of this behavior. Signed-off-by: Craig Gallek Signed-off-by: David S. Miller diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 69bb3fc..0840684 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -3,3 +3,4 @@ psock_fanout psock_tpacket reuseport_bpf reuseport_bpf_cpu +reuseport_dualstack diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index c658792..0e53407 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -4,7 +4,7 @@ CFLAGS = -Wall -O2 -g CFLAGS += -I../../../../usr/include/ -NET_PROGS = socket psock_fanout psock_tpacket reuseport_bpf reuseport_bpf_cpu +NET_PROGS = socket psock_fanout psock_tpacket reuseport_bpf reuseport_bpf_cpu reuseport_dualstack all: $(NET_PROGS) %: %.c diff --git a/tools/testing/selftests/net/reuseport_dualstack.c b/tools/testing/selftests/net/reuseport_dualstack.c new file mode 100644 index 0000000..90958aa --- /dev/null +++ b/tools/testing/selftests/net/reuseport_dualstack.c @@ -0,0 +1,208 @@ +/* + * It is possible to use SO_REUSEPORT to open multiple sockets bound to + * equivalent local addresses using AF_INET and AF_INET6 at the same time. If + * the AF_INET6 socket has IPV6_V6ONLY set, it's clear which socket should + * receive a given incoming packet. However, when it is not set, incoming v4 + * packets should prefer the AF_INET socket(s). This behavior was defined with + * the original SO_REUSEPORT implementation, but broke with + * e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") + * This test creates these mixed AF_INET/AF_INET6 sockets and asserts the + * AF_INET preference for v4 packets. + */ + +#define _GNU_SOURCE + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const int PORT = 8888; + +static void build_rcv_fd(int family, int proto, int *rcv_fds, int count) +{ + struct sockaddr_storage addr; + struct sockaddr_in *addr4; + struct sockaddr_in6 *addr6; + int opt, i; + + switch (family) { + case AF_INET: + addr4 = (struct sockaddr_in *)&addr; + addr4->sin_family = AF_INET; + addr4->sin_addr.s_addr = htonl(INADDR_ANY); + addr4->sin_port = htons(PORT); + break; + case AF_INET6: + addr6 = (struct sockaddr_in6 *)&addr; + addr6->sin6_family = AF_INET6; + addr6->sin6_addr = in6addr_any; + addr6->sin6_port = htons(PORT); + break; + default: + error(1, 0, "Unsupported family %d", family); + } + + for (i = 0; i < count; ++i) { + rcv_fds[i] = socket(family, proto, 0); + if (rcv_fds[i] < 0) + error(1, errno, "failed to create receive socket"); + + opt = 1; + if (setsockopt(rcv_fds[i], SOL_SOCKET, SO_REUSEPORT, &opt, + sizeof(opt))) + error(1, errno, "failed to set SO_REUSEPORT"); + + if (bind(rcv_fds[i], (struct sockaddr *)&addr, sizeof(addr))) + error(1, errno, "failed to bind receive socket"); + + if (proto == SOCK_STREAM && listen(rcv_fds[i], 10)) + error(1, errno, "failed to listen on receive port"); + } +} + +static void send_from_v4(int proto) +{ + struct sockaddr_in saddr, daddr; + int fd; + + saddr.sin_family = AF_INET; + saddr.sin_addr.s_addr = htonl(INADDR_ANY); + saddr.sin_port = 0; + + daddr.sin_family = AF_INET; + daddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); + daddr.sin_port = htons(PORT); + + fd = socket(AF_INET, proto, 0); + if (fd < 0) + error(1, errno, "failed to create send socket"); + + if (bind(fd, (struct sockaddr *)&saddr, sizeof(saddr))) + error(1, errno, "failed to bind send socket"); + + if (connect(fd, (struct sockaddr *)&daddr, sizeof(daddr))) + error(1, errno, "failed to connect send socket"); + + if (send(fd, "a", 1, 0) < 0) + error(1, errno, "failed to send message"); + + close(fd); +} + +static int receive_once(int epfd, int proto) +{ + struct epoll_event ev; + int i, fd; + char buf[8]; + + i = epoll_wait(epfd, &ev, 1, -1); + if (i < 0) + error(1, errno, "epoll_wait failed"); + + if (proto == SOCK_STREAM) { + fd = accept(ev.data.fd, NULL, NULL); + if (fd < 0) + error(1, errno, "failed to accept"); + i = recv(fd, buf, sizeof(buf), 0); + close(fd); + } else { + i = recv(ev.data.fd, buf, sizeof(buf), 0); + } + + if (i < 0) + error(1, errno, "failed to recv"); + + return ev.data.fd; +} + +static void test(int *rcv_fds, int count, int proto) +{ + struct epoll_event ev; + int epfd, i, test_fd; + uint16_t test_family; + socklen_t len; + + epfd = epoll_create(1); + if (epfd < 0) + error(1, errno, "failed to create epoll"); + + ev.events = EPOLLIN; + for (i = 0; i < count; ++i) { + ev.data.fd = rcv_fds[i]; + if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fds[i], &ev)) + error(1, errno, "failed to register sock epoll"); + } + + send_from_v4(proto); + + test_fd = receive_once(epfd, proto); + if (getsockopt(test_fd, SOL_SOCKET, SO_DOMAIN, &test_family, &len)) + error(1, errno, "failed to read socket domain"); + if (test_family != AF_INET) + error(1, 0, "expected to receive on v4 socket but got v6 (%d)", + test_family); + + close(epfd); +} + +int main(void) +{ + int rcv_fds[32], i; + + fprintf(stderr, "---- UDP IPv4 created before IPv6 ----\n"); + build_rcv_fd(AF_INET, SOCK_DGRAM, rcv_fds, 5); + build_rcv_fd(AF_INET6, SOCK_DGRAM, &(rcv_fds[5]), 5); + test(rcv_fds, 10, SOCK_DGRAM); + for (i = 0; i < 10; ++i) + close(rcv_fds[i]); + + fprintf(stderr, "---- UDP IPv6 created before IPv4 ----\n"); + build_rcv_fd(AF_INET6, SOCK_DGRAM, rcv_fds, 5); + build_rcv_fd(AF_INET, SOCK_DGRAM, &(rcv_fds[5]), 5); + test(rcv_fds, 10, SOCK_DGRAM); + for (i = 0; i < 10; ++i) + close(rcv_fds[i]); + + /* NOTE: UDP socket lookups traverse a different code path when there + * are > 10 sockets in a group. + */ + fprintf(stderr, "---- UDP IPv4 created before IPv6 (large) ----\n"); + build_rcv_fd(AF_INET, SOCK_DGRAM, rcv_fds, 16); + build_rcv_fd(AF_INET6, SOCK_DGRAM, &(rcv_fds[16]), 16); + test(rcv_fds, 32, SOCK_DGRAM); + for (i = 0; i < 32; ++i) + close(rcv_fds[i]); + + fprintf(stderr, "---- UDP IPv6 created before IPv4 (large) ----\n"); + build_rcv_fd(AF_INET6, SOCK_DGRAM, rcv_fds, 16); + build_rcv_fd(AF_INET, SOCK_DGRAM, &(rcv_fds[16]), 16); + test(rcv_fds, 32, SOCK_DGRAM); + for (i = 0; i < 32; ++i) + close(rcv_fds[i]); + + fprintf(stderr, "---- TCP IPv4 created before IPv6 ----\n"); + build_rcv_fd(AF_INET, SOCK_STREAM, rcv_fds, 5); + build_rcv_fd(AF_INET6, SOCK_STREAM, &(rcv_fds[5]), 5); + test(rcv_fds, 10, SOCK_STREAM); + for (i = 0; i < 10; ++i) + close(rcv_fds[i]); + + fprintf(stderr, "---- TCP IPv6 created before IPv4 ----\n"); + build_rcv_fd(AF_INET6, SOCK_STREAM, rcv_fds, 5); + build_rcv_fd(AF_INET, SOCK_STREAM, &(rcv_fds[5]), 5); + test(rcv_fds, 10, SOCK_STREAM); + for (i = 0; i < 10; ++i) + close(rcv_fds[i]); + + fprintf(stderr, "SUCCESS\n"); + return 0; +} -- cgit v0.10.2 From c02bc350f9dbce7d637c394a6e1c4d29dc5b28b2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 12 Apr 2016 18:27:29 +0200 Subject: bgmac: fix MAC soft-reset bit for corerev > 4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0. This mainly fixes support for BCM4708A0KF SoCs with Ethernet core rev 5 (it means only some devices as most of BCM4708A0KF-s got core rev 4). This was tested for regressions on BCM47094 which doesn't seem to care which bit gets used. Signed-off-by: Felix Fietkau Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h index 4fbb093..9a03c14 100644 --- a/drivers/net/ethernet/broadcom/bgmac.h +++ b/drivers/net/ethernet/broadcom/bgmac.h @@ -199,9 +199,9 @@ #define BGMAC_CMDCFG_TAI 0x00000200 #define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */ #define BGMAC_CMDCFG_HD_SHIFT 10 -#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for other revs */ -#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, only for core rev 4 */ -#define BGMAC_CMDCFG_SR(rev) ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) +#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for core rev 0-3 */ +#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, for core rev >= 4 */ +#define BGMAC_CMDCFG_SR(rev) ((rev >= 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) #define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ #define BGMAC_CMDCFG_AE 0x00400000 #define BGMAC_CMDCFG_CFE 0x00800000 -- cgit v0.10.2 From 330a106508128056b3d7b6c940a4e906da2282dc Mon Sep 17 00:00:00 2001 From: Martin Vajnar Date: Sat, 2 Apr 2016 20:11:13 +0200 Subject: hp_accel: Add support for HP ProBook 440 G3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HP ProBook 440 G3 laptop needs a non-standard mapping (x_inverted_usd). Signed-off-by: Martin Vajnar Acked-by: Éric Piel Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index 10ce6cb..263002b 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -173,6 +173,7 @@ static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi) DEFINE_CONV(normal, 1, 2, 3); DEFINE_CONV(y_inverted, 1, -2, 3); DEFINE_CONV(x_inverted, -1, 2, 3); +DEFINE_CONV(x_inverted_usd, -1, 2, -3); DEFINE_CONV(z_inverted, 1, 2, -3); DEFINE_CONV(xy_swap, 2, 1, 3); DEFINE_CONV(xy_rotated_left, -2, 1, 3); @@ -236,6 +237,7 @@ static const struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted), AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted), AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left), + AXIS_DMI_MATCH("HPB440G3", "HP ProBook 440 G3", x_inverted_usd), AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left), AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted), AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap), -- cgit v0.10.2 From 5fedbb923936174ab4d1d5cc92bca1cf6b2e0ca2 Mon Sep 17 00:00:00 2001 From: Yingjoe Chen Date: Sat, 2 Apr 2016 14:57:49 +0800 Subject: pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce The debounce time unit for gpio_chip.set_debounce is us but mtk_gpio_set_debounce regard it as ms. Fix this by correct debounce time array dbnc_arr so it can find correct debounce setting. Debounce time for first debounce setting is 500us, correct this as well. While I'm at it, also change the debounce time array name to "debounce_time" for readability. Cc: stable@vger.kernel.org Signed-off-by: Yingjoe Chen Reviewed-by: Daniel Kurtz Acked-by: Hongzhou Yang Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index 2bbe6f7..6ab8c3c 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -1004,7 +1004,8 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, struct mtk_pinctrl *pctl = dev_get_drvdata(chip->parent); int eint_num, virq, eint_offset; unsigned int set_offset, bit, clr_bit, clr_offset, rst, i, unmask, dbnc; - static const unsigned int dbnc_arr[] = {0 , 1, 16, 32, 64, 128, 256}; + static const unsigned int debounce_time[] = {500, 1000, 16000, 32000, 64000, + 128000, 256000}; const struct mtk_desc_pin *pin; struct irq_data *d; @@ -1022,9 +1023,9 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, if (!mtk_eint_can_en_debounce(pctl, eint_num)) return -ENOSYS; - dbnc = ARRAY_SIZE(dbnc_arr); - for (i = 0; i < ARRAY_SIZE(dbnc_arr); i++) { - if (debounce <= dbnc_arr[i]) { + dbnc = ARRAY_SIZE(debounce_time); + for (i = 0; i < ARRAY_SIZE(debounce_time); i++) { + if (debounce <= debounce_time[i]) { dbnc = i; break; } -- cgit v0.10.2 From 9c18fcf7ae0ef87f0723dfd74c27d608c7486e0e Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Wed, 13 Apr 2016 05:55:29 +0100 Subject: ARM: 8551/2: DMA: Fix kzalloc flags in __dma_alloc Commit 19e6e5e5392b ("ARM: 8547/1: dma-mapping: store buffer information") allocates a structure meant for internal buffer management with the GFP flags of the buffer itself. This can trigger the following safeguard in the slab/slub allocator: if (unlikely(flags & GFP_SLAB_BUG_MASK)) { pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK); BUG(); } Fix this by filtering the flags that make the slab allocator unhappy. Signed-off-by: Alexandre Courbot Acked-by: Rabin Vincent Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index deac58d..c941e93 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -762,7 +762,8 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (!mask) return NULL; - buf = kzalloc(sizeof(*buf), gfp); + buf = kzalloc(sizeof(*buf), + gfp & ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM)); if (!buf) return NULL; -- cgit v0.10.2 From 56b367c0cd67d4c3006738e7dc9dda9273fd2bfe Mon Sep 17 00:00:00 2001 From: Keerthy Date: Thu, 14 Apr 2016 10:29:16 +0530 Subject: pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices ranging from 1 to MAX. This leads to a corner case where we try to request the pin number = MAX and fails. bit_pos value is being calculted using ffs. pin_num_from_lsb uses bit_pos value. pins array is populated with: pin + pin_num_from_lsb. The above is 1 more than usual bit indices as bit_pos uses ffs to compute first set bit. Hence the last of the pins array is populated with the MAX value and not MAX - 1 which causes error when we call pin_request. mask_pos is rightly calculated as ((pcs->fmask) << (bit_pos - 1)) Consequently val_pos and submask are correct. Hence use __ffs which gives (ffs(x) - 1) as the first bit set. fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by: Keerthy Acked-by: Tony Lindgren Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index fb126d5..cf9bafa 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1280,9 +1280,9 @@ static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs, /* Parse pins in each row from LSB */ while (mask) { - bit_pos = ffs(mask); + bit_pos = __ffs(mask); pin_num_from_lsb = bit_pos / pcs->bits_per_pin; - mask_pos = ((pcs->fmask) << (bit_pos - 1)); + mask_pos = ((pcs->fmask) << bit_pos); val_pos = val & mask_pos; submask = mask & mask_pos; @@ -1852,7 +1852,7 @@ static int pcs_probe(struct platform_device *pdev) ret = of_property_read_u32(np, "pinctrl-single,function-mask", &pcs->fmask); if (!ret) { - pcs->fshift = ffs(pcs->fmask) - 1; + pcs->fshift = __ffs(pcs->fmask); pcs->fmax = pcs->fmask >> pcs->fshift; } else { /* If mask property doesn't exist, function mux is invalid. */ -- cgit v0.10.2 From 7e578441a4a3bba2a79426ca0f709c801210d08e Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Thu, 14 Apr 2016 14:52:24 -0500 Subject: objtool: Add workaround for GCC switch jump table bug GCC has a rare quirk, currently only seen in three driver functions in the kernel, and only with certain obscure non-distro configs, which can cause objtool to produce "unreachable instruction" false positive warnings. As part of an optimization, GCC makes a copy of an existing switch jump table, modifies it, and then hard-codes the jump (albeit with an indirect jump) to use a single entry in the table. The rest of the jump table and some of its jump targets remain as dead code. In such a case we can just crudely ignore all unreachable instruction warnings for the entire object file. Ideally we would just ignore them for the function, but that would require redesigning the code quite a bit. And honestly that's just not worth doing: unreachable instruction warnings are of questionable value anyway, and this is a very rare issue. kbuild reports: https://lkml.kernel.org/r/201603231906.LWcVUpxm%25fengguang.wu@intel.com https://lkml.kernel.org/r/201603271114.K9i45biy%25fengguang.wu@intel.com https://lkml.kernel.org/r/201603291058.zuJ6ben1%25fengguang.wu@intel.com GCC bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70604 Reported-by: kbuild test robot Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/700fa029bbb0feff34f03ffc69d666a3c3b57a61.1460663532.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c index 7515cb2..157a0f9 100644 --- a/tools/objtool/builtin-check.c +++ b/tools/objtool/builtin-check.c @@ -66,6 +66,7 @@ struct objtool_file { struct list_head insn_list; DECLARE_HASHTABLE(insn_hash, 16); struct section *rodata, *whitelist; + bool ignore_unreachables; }; const char *objname; @@ -664,13 +665,40 @@ static int add_func_switch_tables(struct objtool_file *file, text_rela->addend); /* - * TODO: Document where this is needed, or get rid of it. - * * rare case: jmpq *[addr](%rip) + * + * This check is for a rare gcc quirk, currently only seen in + * three driver functions in the kernel, only with certain + * obscure non-distro configs. + * + * As part of an optimization, gcc makes a copy of an existing + * switch jump table, modifies it, and then hard-codes the jump + * (albeit with an indirect jump) to use a single entry in the + * table. The rest of the jump table and some of its jump + * targets remain as dead code. + * + * In such a case we can just crudely ignore all unreachable + * instruction warnings for the entire object file. Ideally we + * would just ignore them for the function, but that would + * require redesigning the code quite a bit. And honestly + * that's just not worth doing: unreachable instruction + * warnings are of questionable value anyway, and this is such + * a rare issue. + * + * kbuild reports: + * - https://lkml.kernel.org/r/201603231906.LWcVUpxm%25fengguang.wu@intel.com + * - https://lkml.kernel.org/r/201603271114.K9i45biy%25fengguang.wu@intel.com + * - https://lkml.kernel.org/r/201603291058.zuJ6ben1%25fengguang.wu@intel.com + * + * gcc bug: + * - https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70604 */ - if (!rodata_rela) + if (!rodata_rela) { rodata_rela = find_rela_by_dest(file->rodata, text_rela->addend + 4); + if (rodata_rela) + file->ignore_unreachables = true; + } if (!rodata_rela) continue; @@ -732,9 +760,6 @@ static int decode_sections(struct objtool_file *file) { int ret; - file->whitelist = find_section_by_name(file->elf, "__func_stack_frame_non_standard"); - file->rodata = find_section_by_name(file->elf, ".rodata"); - ret = decode_instructions(file); if (ret) return ret; @@ -1056,13 +1081,14 @@ static int validate_functions(struct objtool_file *file) if (insn->visited) continue; - if (!ignore_unreachable_insn(func, insn) && - !warnings) { - WARN_FUNC("function has unreachable instruction", insn->sec, insn->offset); - warnings++; - } - insn->visited = true; + + if (file->ignore_unreachables || warnings || + ignore_unreachable_insn(func, insn)) + continue; + + WARN_FUNC("function has unreachable instruction", insn->sec, insn->offset); + warnings++; } } } @@ -1133,6 +1159,9 @@ int cmd_check(int argc, const char **argv) INIT_LIST_HEAD(&file.insn_list); hash_init(file.insn_hash); + file.whitelist = find_section_by_name(file.elf, "__func_stack_frame_non_standard"); + file.rodata = find_section_by_name(file.elf, ".rodata"); + file.ignore_unreachables = false; ret = decode_sections(&file); if (ret < 0) -- cgit v0.10.2 From 6f0904ada402a45b3a0a3b9b6507d91d3a9da67a Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Wed, 6 Apr 2016 14:42:32 -0700 Subject: crypto: rsa-pkcs1pad - fix dst len The output buffer length has to be at least as big as the key_size. It is then updated to the actual output size by the implementation. Cc: Signed-off-by: Tadeusz Struk Signed-off-by: Herbert Xu diff --git a/crypto/rsa-pkcs1pad.c b/crypto/rsa-pkcs1pad.c index 1cea67d..ead8dc0 100644 --- a/crypto/rsa-pkcs1pad.c +++ b/crypto/rsa-pkcs1pad.c @@ -387,16 +387,16 @@ static int pkcs1pad_decrypt(struct akcipher_request *req) req_ctx->child_req.src = req->src; req_ctx->child_req.src_len = req->src_len; req_ctx->child_req.dst = req_ctx->out_sg; - req_ctx->child_req.dst_len = ctx->key_size - 1; + req_ctx->child_req.dst_len = ctx->key_size ; - req_ctx->out_buf = kmalloc(ctx->key_size - 1, + req_ctx->out_buf = kmalloc(ctx->key_size, (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? GFP_KERNEL : GFP_ATOMIC); if (!req_ctx->out_buf) return -ENOMEM; pkcs1pad_sg_set_buf(req_ctx->out_sg, req_ctx->out_buf, - ctx->key_size - 1, NULL); + ctx->key_size, NULL); akcipher_request_set_tfm(&req_ctx->child_req, ctx->child); akcipher_request_set_callback(&req_ctx->child_req, req->base.flags, @@ -595,16 +595,16 @@ static int pkcs1pad_verify(struct akcipher_request *req) req_ctx->child_req.src = req->src; req_ctx->child_req.src_len = req->src_len; req_ctx->child_req.dst = req_ctx->out_sg; - req_ctx->child_req.dst_len = ctx->key_size - 1; + req_ctx->child_req.dst_len = ctx->key_size; - req_ctx->out_buf = kmalloc(ctx->key_size - 1, + req_ctx->out_buf = kmalloc(ctx->key_size, (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? GFP_KERNEL : GFP_ATOMIC); if (!req_ctx->out_buf) return -ENOMEM; pkcs1pad_sg_set_buf(req_ctx->out_sg, req_ctx->out_buf, - ctx->key_size - 1, NULL); + ctx->key_size, NULL); akcipher_request_set_tfm(&req_ctx->child_req, ctx->child); akcipher_request_set_callback(&req_ctx->child_req, req->base.flags, -- cgit v0.10.2 From 0851561d9c965df086ef8a53f981f5f95a57c2c8 Mon Sep 17 00:00:00 2001 From: Xiaodong Liu Date: Tue, 12 Apr 2016 09:45:51 +0000 Subject: crypto: sha1-mb - use corrcet pointer while completing jobs In sha_complete_job, incorrect mcryptd_hash_request_ctx pointer is used when check and complete other jobs. If the memory of first completed req is freed, while still completing other jobs in the func, kernel will crash since NULL pointer is assigned to RIP. Cc: Signed-off-by: Xiaodong Liu Acked-by: Tim Chen Signed-off-by: Herbert Xu diff --git a/arch/x86/crypto/sha-mb/sha1_mb.c b/arch/x86/crypto/sha-mb/sha1_mb.c index a8a0224..081255c 100644 --- a/arch/x86/crypto/sha-mb/sha1_mb.c +++ b/arch/x86/crypto/sha-mb/sha1_mb.c @@ -453,10 +453,10 @@ static int sha_complete_job(struct mcryptd_hash_request_ctx *rctx, req = cast_mcryptd_ctx_to_req(req_ctx); if (irqs_disabled()) - rctx->complete(&req->base, ret); + req_ctx->complete(&req->base, ret); else { local_bh_disable(); - rctx->complete(&req->base, ret); + req_ctx->complete(&req->base, ret); local_bh_enable(); } } -- cgit v0.10.2 From f709b45ec461b548c41a00044dba1f1b572783bf Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Wed, 13 Apr 2016 10:52:25 -0500 Subject: crypto: ccp - Prevent information leakage on export Prevent information from leaking to userspace by doing a memset to 0 of the export state structure before setting the structure values and copying it. This prevents un-initialized padding areas from being copied into the export area. Cc: # 3.14.x- Reported-by: Ben Hutchings Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu diff --git a/drivers/crypto/ccp/ccp-crypto-aes-cmac.c b/drivers/crypto/ccp/ccp-crypto-aes-cmac.c index 3d9acc5..60fc0fa 100644 --- a/drivers/crypto/ccp/ccp-crypto-aes-cmac.c +++ b/drivers/crypto/ccp/ccp-crypto-aes-cmac.c @@ -225,6 +225,9 @@ static int ccp_aes_cmac_export(struct ahash_request *req, void *out) struct ccp_aes_cmac_req_ctx *rctx = ahash_request_ctx(req); struct ccp_aes_cmac_exp_ctx state; + /* Don't let anything leak to 'out' */ + memset(&state, 0, sizeof(state)); + state.null_msg = rctx->null_msg; memcpy(state.iv, rctx->iv, sizeof(state.iv)); state.buf_count = rctx->buf_count; diff --git a/drivers/crypto/ccp/ccp-crypto-sha.c b/drivers/crypto/ccp/ccp-crypto-sha.c index b5ad728..8f36af6 100644 --- a/drivers/crypto/ccp/ccp-crypto-sha.c +++ b/drivers/crypto/ccp/ccp-crypto-sha.c @@ -212,6 +212,9 @@ static int ccp_sha_export(struct ahash_request *req, void *out) struct ccp_sha_req_ctx *rctx = ahash_request_ctx(req); struct ccp_sha_exp_ctx state; + /* Don't let anything leak to 'out' */ + memset(&state, 0, sizeof(state)); + state.type = rctx->type; state.msg_bits = rctx->msg_bits; state.first = rctx->first; -- cgit v0.10.2 From ff22b4806dd79ba06c78255b67e73c10e34d47cc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 15 Apr 2016 17:47:20 +0300 Subject: hp_accel: Silence an uninitialized variable warning If acpi_evaluate_integer() fails then "lret" isn't initialized. I've tweaked the error handling to avoid this issue. Signed-off-by: Dan Carpenter Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index 263002b..0935668 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -127,8 +127,10 @@ static int lis3lv02d_acpi_read(struct lis3lv02d *lis3, int reg, u8 *ret) arg0.integer.value = reg; status = acpi_evaluate_integer(dev->handle, "ALRD", &args, &lret); + if (ACPI_FAILURE(status)) + return -EINVAL; *ret = lret; - return (status != AE_OK) ? -EINVAL : 0; + return 0; } /** -- cgit v0.10.2 From d0192dca2d6b64c043db5babb40076d13a6e955b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 15 Apr 2016 17:45:58 +0300 Subject: intel_telemetry_pltdrv: Silence an uninitialized variable warning Presumably "pss_period" and "ioss_period" can't both be zero, but this function is never called so we can't infer that using static analysis alone. Silence the warning by setting "ret" to zero. Signed-off-by: Dan Carpenter Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/intel_telemetry_pltdrv.c b/drivers/platform/x86/intel_telemetry_pltdrv.c index 397119f..781bd10 100644 --- a/drivers/platform/x86/intel_telemetry_pltdrv.c +++ b/drivers/platform/x86/intel_telemetry_pltdrv.c @@ -659,7 +659,7 @@ static int telemetry_plt_update_events(struct telemetry_evtconfig pss_evtconfig, static int telemetry_plt_set_sampling_period(u8 pss_period, u8 ioss_period) { u32 telem_ctrl = 0; - int ret; + int ret = 0; mutex_lock(&(telm_conf->telem_lock)); if (ioss_period) { -- cgit v0.10.2 From a7718360d91eedbedd58978ec8fff4a67a866f86 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 15 Apr 2016 17:46:34 +0300 Subject: thinkpad_acpi: Silence an uninitialized variable warning If fan_get_status() fails then "s" is not initialized. Tweak the error handling a bit to silence this warning. Signed-off-by: Dan Carpenter Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e305ab5..9255ff3 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7972,10 +7972,12 @@ static int fan_get_status_safe(u8 *status) fan_update_desired_level(s); mutex_unlock(&fan_mutex); + if (rc) + return rc; if (status) *status = s; - return rc; + return 0; } static int fan_get_speed(unsigned int *speed) -- cgit v0.10.2 From 1378a683443753923eb22d01ce322e92a383ba8a Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 8 Apr 2016 13:23:52 +0200 Subject: s390/dcssblk: fix possible deadlock in remove vs. per-device attributes dcssblk_remove_store() holds the dcssblk_devices_sem semaphore while calling device_unregister(), which in turn tries to acquire the kernfs kn->dev_map rwsem for the device sysfs subtree. The same rwsem is also acquired when using the per-device sysfs attributes in the device sub-tree, and the attribute handlers then also acquire the dcssblk_devices_sem. This can lead to a deadlock when removing a DCSS while concurrently reading from / writing to one of its sysfs attributes. The following lockdep warning hinted towards the issue (CPU0 = dcssblk_remove_store, CPU1 = dcssblk_shared_store): [ 76.496047] Possible unsafe locking scenario: [ 76.496054] CPU0 CPU1 [ 76.496059] ---- ---- [ 76.496087] lock(&dcssblk_devices_sem); [ 76.496090] lock(s_active#175); [ 76.496106] lock(&dcssblk_devices_sem); [ 76.496110] lock(s_active#175); [ 76.496115] *** DEADLOCK *** Fix this by releasing the dcssblk_devices_sem semaphore, which only protects internal DCSS data, before calling device_unregister(). Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c index 1bce9cf..b839086 100644 --- a/drivers/s390/block/dcssblk.c +++ b/drivers/s390/block/dcssblk.c @@ -756,15 +756,16 @@ dcssblk_remove_store(struct device *dev, struct device_attribute *attr, const ch blk_cleanup_queue(dev_info->dcssblk_queue); dev_info->gd->queue = NULL; put_disk(dev_info->gd); - device_unregister(&dev_info->dev); /* unload all related segments */ list_for_each_entry(entry, &dev_info->seg_list, lh) segment_unload(entry->segment_name); - put_device(&dev_info->dev); up_write(&dcssblk_devices_sem); + device_unregister(&dev_info->dev); + put_device(&dev_info->dev); + rc = count; out_buf: kfree(local_buf); -- cgit v0.10.2 From 8497695243f70fd19ed6cf28b63584f1b608b5f9 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Apr 2016 11:05:20 +0200 Subject: s390/spinlock: avoid yield to non existent cpu arch_spin_lock_wait_flags() checks if a spinlock is not held before trying a compare and swap instruction. If the lock is unlocked it tries the compare and swap instruction, however if a different cpu grabbed the lock in the meantime the instruction will fail as expected. Subsequently the arch_spin_lock_wait_flags() incorrectly tries to figure out if the cpu that holds the lock is running. However it is using the wrong cpu number for this (-1) and then will also yield the current cpu to the wrong cpu. Fix this by adding a missing continue statement. Fixes: 470ada6b1a1d ("s390/spinlock: refactor arch_spin_lock_wait[_flags]") Signed-off-by: Heiko Carstens Acked-by: Martin Schwidefsky diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index d4549c9..e5f50a7 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -105,6 +105,7 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags) if (_raw_compare_and_swap(&lp->lock, 0, cpu)) return; local_irq_restore(flags); + continue; } /* Check if the lock owner is running. */ if (first_diag && cpu_is_preempted(~owner)) { -- cgit v0.10.2 From 2fd92273646abad21766ddfbfa00b6f927362308 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 14 Apr 2016 09:00:27 +0200 Subject: s390: add CPU_BIG_ENDIAN config option Make sure that s390 appears to be a big endian machine by defining this config option. Without this s390 appears to be little endian as seen by e.g. the recordmount script: "perl ./scripts/recordmcount.pl "s390" "little" "64"" This has no practical impact within the script since the endian variable is only evaluated for mips. However there are already a couple of common code places which evaluate this config option. None of them is relevant for s390 currently though. To avoid any issues in the future (and fix the recordmcount oddity) add the new config option. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index aad23e3..bf24ab1 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -4,6 +4,9 @@ config MMU config ZONE_DMA def_bool y +config CPU_BIG_ENDIAN + def_bool y + config LOCKDEP_SUPPORT def_bool y -- cgit v0.10.2 From 54dca7015a7d6c09d34623c6ec61de30896186dd Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 15 Apr 2016 13:11:56 +0100 Subject: ASoC: arizona: Free speaker thermal IRQs in CODEC remove The thermal warning IRQs for the speaker are requested in CODEC probe but never freed. This patch frees them in CODEC remove. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c index 92d22a0..8395931 100644 --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -249,6 +249,18 @@ int arizona_init_spk(struct snd_soc_codec *codec) } EXPORT_SYMBOL_GPL(arizona_init_spk); +int arizona_free_spk(struct snd_soc_codec *codec) +{ + struct arizona_priv *priv = snd_soc_codec_get_drvdata(codec); + struct arizona *arizona = priv->arizona; + + arizona_free_irq(arizona, ARIZONA_IRQ_SPK_OVERHEAT_WARN, arizona); + arizona_free_irq(arizona, ARIZONA_IRQ_SPK_OVERHEAT, arizona); + + return 0; +} +EXPORT_SYMBOL_GPL(arizona_free_spk); + static const struct snd_soc_dapm_route arizona_mono_routes[] = { { "OUT1R", NULL, "OUT1L" }, { "OUT2R", NULL, "OUT2L" }, diff --git a/sound/soc/codecs/arizona.h b/sound/soc/codecs/arizona.h index 1ea8e4e..ce0531b 100644 --- a/sound/soc/codecs/arizona.h +++ b/sound/soc/codecs/arizona.h @@ -307,6 +307,8 @@ extern int arizona_init_spk(struct snd_soc_codec *codec); extern int arizona_init_gpio(struct snd_soc_codec *codec); extern int arizona_init_mono(struct snd_soc_codec *codec); +extern int arizona_free_spk(struct snd_soc_codec *codec); + extern int arizona_init_dai(struct arizona_priv *priv, int dai); int arizona_set_output_mode(struct snd_soc_codec *codec, int output, diff --git a/sound/soc/codecs/cs47l24.c b/sound/soc/codecs/cs47l24.c index 576087b..00e9b6fc 100644 --- a/sound/soc/codecs/cs47l24.c +++ b/sound/soc/codecs/cs47l24.c @@ -1108,6 +1108,9 @@ static int cs47l24_codec_remove(struct snd_soc_codec *codec) priv->core.arizona->dapm = NULL; arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv); + + arizona_free_spk(codec); + return 0; } diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index a8b3e3f..59fd3e8 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -1960,6 +1960,8 @@ static int wm5102_codec_remove(struct snd_soc_codec *codec) priv->core.arizona->dapm = NULL; + arizona_free_spk(codec); + return 0; } diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 83ba70f..2728ac5 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -2298,6 +2298,8 @@ static int wm5110_codec_remove(struct snd_soc_codec *codec) arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv); + arizona_free_spk(codec); + return 0; } diff --git a/sound/soc/codecs/wm8997.c b/sound/soc/codecs/wm8997.c index 52d766e..6b0785b 100644 --- a/sound/soc/codecs/wm8997.c +++ b/sound/soc/codecs/wm8997.c @@ -1072,6 +1072,8 @@ static int wm8997_codec_remove(struct snd_soc_codec *codec) priv->core.arizona->dapm = NULL; + arizona_free_spk(codec); + return 0; } diff --git a/sound/soc/codecs/wm8998.c b/sound/soc/codecs/wm8998.c index 0123960..449f666 100644 --- a/sound/soc/codecs/wm8998.c +++ b/sound/soc/codecs/wm8998.c @@ -1324,6 +1324,8 @@ static int wm8998_codec_remove(struct snd_soc_codec *codec) priv->core.arizona->dapm = NULL; + arizona_free_spk(codec); + return 0; } -- cgit v0.10.2 From ab9f87c413c297cb9e7d544e0e634aaadc7fb87d Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 15 Apr 2016 13:11:57 +0100 Subject: ASoC: wm5102: Free compressed IRQ in CODEC remove We request one of the DSP IRQs during CODEC probe, as such we should free it during CODEC remove, this patch does so. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 59fd3e8..1bae17e 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -1955,11 +1955,14 @@ err_adsp2_codec_probe: static int wm5102_codec_remove(struct snd_soc_codec *codec) { struct wm5102_priv *priv = snd_soc_codec_get_drvdata(codec); + struct arizona *arizona = priv->core.arizona; wm_adsp2_codec_remove(&priv->core.adsp[0], codec); priv->core.arizona->dapm = NULL; + arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv); + arizona_free_spk(codec); return 0; -- cgit v0.10.2 From cb92148b58a49455f3a7204eba3aee09a8b7683c Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Fri, 15 Apr 2016 13:00:11 -0500 Subject: PCI: Add pci_set_vpd_size() to set VPD size After 104daa71b396 ("PCI: Determine actual VPD size on first access"), the PCI core computes the valid VPD size by parsing the VPD starting at offset 0x0. We don't attempt to read past that valid size because that causes some devices to crash. However, some devices do have data past that valid size. For example, Chelsio adapters contain two VPD structures, and the driver needs both of them. Add pci_set_vpd_size(). If a driver knows it is safe to read past the end of the VPD data structure at offset 0, it can use pci_set_vpd_size() to allow access to as much data as it needs. [bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and return int (not ssize_t)] Fixes: 104daa71b396 ("PCI: Determine actual VPD size on first access") Tested-by: Steve Wise Signed-off-by: Casey Leedom Signed-off-by: Hariprasad Shenai Signed-off-by: Bjorn Helgaas diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 01b9d0a..d11cdbb 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -275,6 +275,19 @@ ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void } EXPORT_SYMBOL(pci_write_vpd); +/** + * pci_set_vpd_size - Set size of Vital Product Data space + * @dev: pci device struct + * @len: size of vpd space + */ +int pci_set_vpd_size(struct pci_dev *dev, size_t len) +{ + if (!dev->vpd || !dev->vpd->ops) + return -ENODEV; + return dev->vpd->ops->set_size(dev, len); +} +EXPORT_SYMBOL(pci_set_vpd_size); + #define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1) /** @@ -498,9 +511,23 @@ out: return ret ? ret : count; } +static int pci_vpd_set_size(struct pci_dev *dev, size_t len) +{ + struct pci_vpd *vpd = dev->vpd; + + if (len == 0 || len > PCI_VPD_MAX_SIZE) + return -EIO; + + vpd->valid = 1; + vpd->len = len; + + return 0; +} + static const struct pci_vpd_ops pci_vpd_ops = { .read = pci_vpd_read, .write = pci_vpd_write, + .set_size = pci_vpd_set_size, }; static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count, @@ -533,9 +560,24 @@ static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count, return ret; } +static int pci_vpd_f0_set_size(struct pci_dev *dev, size_t len) +{ + struct pci_dev *tdev = pci_get_slot(dev->bus, + PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); + int ret; + + if (!tdev) + return -ENODEV; + + ret = pci_set_vpd_size(tdev, len); + pci_dev_put(tdev); + return ret; +} + static const struct pci_vpd_ops pci_vpd_f0_ops = { .read = pci_vpd_f0_read, .write = pci_vpd_f0_write, + .set_size = pci_vpd_f0_set_size, }; int pci_vpd_init(struct pci_dev *dev) diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index d0fb934..a814bbb 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -97,6 +97,7 @@ static inline bool pci_has_subordinate(struct pci_dev *pci_dev) struct pci_vpd_ops { ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf); ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf); + int (*set_size)(struct pci_dev *dev, size_t len); }; struct pci_vpd { diff --git a/include/linux/pci.h b/include/linux/pci.h index 004b813..932ec74 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1111,6 +1111,7 @@ void pci_unlock_rescan_remove(void); /* Vital product data routines */ ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf); ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf); +int pci_set_vpd_size(struct pci_dev *dev, size_t len); /* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */ resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx); -- cgit v0.10.2 From 67e658794ca191b3221b143f2a1c10d002c40bc8 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Fri, 15 Apr 2016 13:00:18 -0500 Subject: cxgb4: Set VPD size so we can read both VPD structures Chelsio adapters have two VPD structures stored in the VPD: - offset 0x000: an abbreviated VPD, and - offset 0x400: the complete VPD. After 104daa71b396 ("PCI: Determine actual VPD size on first access"), the PCI core computes the valid VPD size by parsing the VPD starting at offset 0x0. That size only includes the abbreviated VPD structure, so reads of the complete VPD at 0x400 fail. Explicitly set the VPD size with pci_set_vpd_size() so the driver can read both VPD structures. [bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and return int (not ssize_t)] Fixes: 104daa71b396 ("PCI: Determine actual VPD size on first access") Tested-by: Steve Wise Signed-off-by: Casey Leedom Signed-off-by: Hariprasad Shenai Signed-off-by: Bjorn Helgaas diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index cc1736b..c7efb11 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -2557,6 +2557,7 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size) } #define EEPROM_STAT_ADDR 0x7bfc +#define VPD_SIZE 0x800 #define VPD_BASE 0x400 #define VPD_BASE_OLD 0 #define VPD_LEN 1024 @@ -2594,6 +2595,15 @@ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p) if (!vpd) return -ENOMEM; + /* We have two VPD data structures stored in the adapter VPD area. + * By default, Linux calculates the size of the VPD area by traversing + * the first VPD area at offset 0x0, so we need to tell the OS what + * our real VPD size is. + */ + ret = pci_set_vpd_size(adapter->pdev, VPD_SIZE); + if (ret < 0) + goto out; + /* Card information normally starts at VPD_BASE but early cards had * it at 0. */ -- cgit v0.10.2 From cfe255600154f0072d4a8695590dbd194dfd1aeb Mon Sep 17 00:00:00 2001 From: Andrew Goodbody Date: Wed, 13 Apr 2016 15:36:48 +0100 Subject: cpsw: Prevent NUll pointer dereference with two PHYs Adding a 2nd PHY to cpsw results in a NULL pointer dereference as below. Fix by maintaining a reference to each PHY node in slave struct instead of a single reference in the priv struct which was overwritten by the 2nd PHY. [ 17.870933] Unable to handle kernel NULL pointer dereference at virtual address 00000180 [ 17.879557] pgd = dc8bc000 [ 17.882514] [00000180] *pgd=9c882831, *pte=00000000, *ppte=00000000 [ 17.889213] Internal error: Oops: 17 [#1] ARM [ 17.893838] Modules linked in: [ 17.897102] CPU: 0 PID: 1657 Comm: connmand Not tainted 4.5.0-ge463dfb-dirty #11 [ 17.904947] Hardware name: Cambrionix whippet [ 17.909576] task: dc859240 ti: dc968000 task.ti: dc968000 [ 17.915339] PC is at phy_attached_print+0x18/0x8c [ 17.920339] LR is at phy_attached_info+0x14/0x18 [ 17.925247] pc : [] lr : [] psr: 600f0113 [ 17.925247] sp : dc969cf8 ip : dc969d28 fp : dc969d18 [ 17.937425] r10: dda7a400 r9 : 00000000 r8 : 00000000 [ 17.942971] r7 : 00000001 r6 : ddb00480 r5 : ddb8cb34 r4 : 00000000 [ 17.949898] r3 : c0954cc0 r2 : c09562b0 r1 : 00000000 r0 : 00000000 [ 17.956829] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 17.964401] Control: 10c5387d Table: 9c8bc019 DAC: 00000051 [ 17.970500] Process connmand (pid: 1657, stack limit = 0xdc968210) [ 17.977059] Stack: (0xdc969cf8 to 0xdc96a000) [ 17.981692] 9ce0: dc969d28 dc969d08 [ 17.990386] 9d00: c038f9bc c038f6b4 ddb00480 dc969d34 dc969d28 c042bb74 c042bae4 00000000 [ 17.999080] 9d20: c09562b0 c0954cc0 dc969d5c dc969d38 c043ebfc c042bb6c 00000007 00000003 [ 18.007773] 9d40: ddb00000 ddb8cb58 ddb00480 00000001 dc969dec dc969d60 c0441614 c043ea68 [ 18.016465] 9d60: 00000000 00000003 00000000 fffffff4 dc969df4 0000000d 00000000 00000000 [ 18.025159] 9d80: dc969db4 dc969d90 c005dc08 c05839e0 dc969df4 0000000d ddb00000 00001002 [ 18.033851] 9da0: 00000000 00000000 dc969dcc dc969db8 c005ddf4 c005dbc8 00000000 00000118 [ 18.042544] 9dc0: dc969dec dc969dd0 ddb00000 c06db27c ffff9003 00001002 00000000 00000000 [ 18.051237] 9de0: dc969e0c dc969df0 c057c88c c04410dc dc969e0c ddb00000 ddb00000 00000001 [ 18.059930] 9e00: dc969e34 dc969e10 c057cb44 c057c7d8 ddb00000 ddb00138 00001002 beaeda20 [ 18.068622] 9e20: 00000000 00000000 dc969e5c dc969e38 c057cc28 c057cac0 00000000 dc969e80 [ 18.077315] 9e40: dda7a40c beaeda20 00000000 00000000 dc969ecc dc969e60 c05e36d0 c057cc14 [ 18.086007] 9e60: dc969e84 00000051 beaeda20 00000000 dda7a40c 00000014 ddb00000 00008914 [ 18.094699] 9e80: 30687465 00000000 00000000 00000000 00009003 00000000 00000000 00000000 [ 18.103391] 9ea0: 00001002 00008914 dd257ae0 beaeda20 c098a428 beaeda20 00000011 00000000 [ 18.112084] 9ec0: dc969edc dc969ed0 c05e4e54 c05e3030 dc969efc dc969ee0 c055f5ac c05e4cc4 [ 18.120777] 9ee0: beaeda20 dd257ae0 dc8ab4c0 00008914 dc969f7c dc969f00 c010b388 c055f45c [ 18.129471] 9f00: c071ca40 dd257ac0 c00165e8 dc968000 dc969f3c dc969f20 dc969f64 dc969f28 [ 18.138164] 9f20: c0115708 c0683ec8 dd257ac0 dd257ac0 dc969f74 dc969f40 c055f350 c00fc66c [ 18.146857] 9f40: dd82e4d0 00000011 00000000 00080000 dd257ac0 00000000 dc8ab4c0 dc8ab4c0 [ 18.155550] 9f60: 00008914 beaeda20 00000011 00000000 dc969fa4 dc969f80 c010bc34 c010b2fc [ 18.164242] 9f80: 00000000 00000011 00000002 00000036 c00165e8 dc968000 00000000 dc969fa8 [ 18.172935] 9fa0: c00163e0 c010bbcc 00000000 00000011 00000011 00008914 beaeda20 00009003 [ 18.181628] 9fc0: 00000000 00000011 00000002 00000036 00081018 00000001 00000000 beaedc10 [ 18.190320] 9fe0: 00083188 beaeda1c 00043a5d b6d29c0c 600b0010 00000011 00000000 00000000 [ 18.198989] Backtrace: [ 18.201621] [] (phy_attached_print) from [] (phy_attached_info+0x14/0x18) [ 18.210664] r3:c0954cc0 r2:c09562b0 r1:00000000 [ 18.215588] r4:ddb00480 [ 18.218322] [] (phy_attached_info) from [] (cpsw_slave_open+0x1a0/0x280) [ 18.227293] [] (cpsw_slave_open) from [] (cpsw_ndo_open+0x544/0x674) [ 18.235874] r7:00000001 r6:ddb00480 r5:ddb8cb58 r4:ddb00000 [ 18.241944] [] (cpsw_ndo_open) from [] (__dev_open+0xc0/0x128) [ 18.249972] r9:00000000 r8:00000000 r7:00001002 r6:ffff9003 r5:c06db27c r4:ddb00000 [ 18.258255] [] (__dev_open) from [] (__dev_change_flags+0x90/0x154) [ 18.266745] r5:00000001 r4:ddb00000 [ 18.270575] [] (__dev_change_flags) from [] (dev_change_flags+0x20/0x50) [ 18.279523] r9:00000000 r8:00000000 r7:beaeda20 r6:00001002 r5:ddb00138 r4:ddb00000 [ 18.287811] [] (dev_change_flags) from [] (devinet_ioctl+0x6ac/0x76c) [ 18.296483] r9:00000000 r8:00000000 r7:beaeda20 r6:dda7a40c r5:dc969e80 r4:00000000 [ 18.304762] [] (devinet_ioctl) from [] (inet_ioctl+0x19c/0x1c8) [ 18.312882] r10:00000000 r9:00000011 r8:beaeda20 r7:c098a428 r6:beaeda20 r5:dd257ae0 [ 18.321235] r4:00008914 [ 18.323956] [] (inet_ioctl) from [] (sock_ioctl+0x15c/0x2d8) [ 18.331829] [] (sock_ioctl) from [] (do_vfs_ioctl+0x98/0x8d0) [ 18.339765] r7:00008914 r6:dc8ab4c0 r5:dd257ae0 r4:beaeda20 [ 18.345822] [] (do_vfs_ioctl) from [] (SyS_ioctl+0x74/0x84) [ 18.353573] r10:00000000 r9:00000011 r8:beaeda20 r7:00008914 r6:dc8ab4c0 r5:dc8ab4c0 [ 18.361924] r4:00000000 [ 18.364653] [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c) [ 18.372682] r9:dc968000 r8:c00165e8 r7:00000036 r6:00000002 r5:00000011 r4:00000000 [ 18.380960] Code: e92dd810 e24cb010 e24dd010 e59b4004 (e5902180) [ 18.387580] ---[ end trace c80529466223f3f3 ]--- Signed-off-by: Andrew Goodbody Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 42fdfd4..5f5bb44 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -349,6 +349,7 @@ struct cpsw_slave { struct cpsw_slave_data *data; struct phy_device *phy; struct net_device *ndev; + struct device_node *phy_node; u32 port_vlan; u32 open_stat; }; @@ -367,7 +368,6 @@ struct cpsw_priv { spinlock_t lock; struct platform_device *pdev; struct net_device *ndev; - struct device_node *phy_node; struct napi_struct napi_rx; struct napi_struct napi_tx; struct device *dev; @@ -1148,8 +1148,8 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); - if (priv->phy_node) - slave->phy = of_phy_connect(priv->ndev, priv->phy_node, + if (slave->phy_node) + slave->phy = of_phy_connect(priv->ndev, slave->phy_node, &cpsw_adjust_link, 0, slave->data->phy_if); else slave->phy = phy_connect(priv->ndev, slave->data->phy_id, @@ -2033,7 +2033,8 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, if (strcmp(slave_node->name, "slave")) continue; - priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0); + priv->slaves[i].phy_node = + of_parse_phandle(slave_node, "phy-handle", 0); parp = of_get_property(slave_node, "phy_id", &lenp); if (of_phy_is_fixed_link(slave_node)) { struct device_node *phy_node; @@ -2275,12 +2276,22 @@ static int cpsw_probe(struct platform_device *pdev) /* Select default pin state */ pinctrl_pm_select_default_state(&pdev->dev); + data = &priv->data; + priv->slaves = devm_kzalloc(&pdev->dev, + sizeof(struct cpsw_slave) * data->slaves, + GFP_KERNEL); + if (!priv->slaves) { + ret = -ENOMEM; + goto clean_runtime_disable_ret; + } + for (i = 0; i < data->slaves; i++) + priv->slaves[i].slave_num = i; + if (cpsw_probe_dt(priv, pdev)) { dev_err(&pdev->dev, "cpsw: platform data missing\n"); ret = -ENODEV; goto clean_runtime_disable_ret; } - data = &priv->data; if (is_valid_ether_addr(data->slave_data[0].mac_addr)) { memcpy(priv->mac_addr, data->slave_data[0].mac_addr, ETH_ALEN); @@ -2292,16 +2303,6 @@ static int cpsw_probe(struct platform_device *pdev) memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN); - priv->slaves = devm_kzalloc(&pdev->dev, - sizeof(struct cpsw_slave) * data->slaves, - GFP_KERNEL); - if (!priv->slaves) { - ret = -ENOMEM; - goto clean_runtime_disable_ret; - } - for (i = 0; i < data->slaves; i++) - priv->slaves[i].slave_num = i; - priv->slaves[0].ndev = ndev; priv->emac_port = 0; -- cgit v0.10.2 From 9241e2df4fbc648a92ea0752918e05c26255649e Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Sat, 16 Apr 2016 02:27:58 +0200 Subject: vlan: pull on __vlan_insert_tag error path and fix csum correction When __vlan_insert_tag() fails from skb_vlan_push() path due to the skb_cow_head(), we need to undo the __skb_push() in the error path as well that was done earlier to move skb->data pointer to mac header. Moreover, I noticed that when in the non-error path the __skb_pull() is done and the original offset to mac header was non-zero, we fixup from a wrong skb->data offset in the checksum complete processing. So the skb_postpush_rcsum() really needs to be done before __skb_pull() where skb->data still points to the mac header start and thus operates under the same conditions as in __vlan_insert_tag(). Fixes: 93515d53b133 ("net: move vlan pop/push functions into common code") Signed-off-by: Daniel Borkmann Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index d04c2d1..e561f9f 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4502,13 +4502,16 @@ int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) __skb_push(skb, offset); err = __vlan_insert_tag(skb, skb->vlan_proto, skb_vlan_tag_get(skb)); - if (err) + if (err) { + __skb_pull(skb, offset); return err; + } + skb->protocol = skb->vlan_proto; skb->mac_len += VLAN_HLEN; - __skb_pull(skb, offset); skb_postpush_rcsum(skb, skb->data + (2 * ETH_ALEN), VLAN_HLEN); + __skb_pull(skb, offset); } __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci); return 0; -- cgit v0.10.2 From b1547d3101e74e809b9790174b27f1080747b009 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Fri, 15 Apr 2016 09:17:10 -0500 Subject: objtool: Detect falling through to the next function There are several cases in compiled C code where a function may not return at the end, and may instead fall through to the next function. That may indicate a bug in the code, or a gcc bug, or even an objtool bug. But in each case, objtool reports an unhelpful warning, something like: drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_fc_host_stats()+0x0: duplicate frame pointer save drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_fc_host_stats()+0x0: frame pointer state mismatch Detect this situation and print a more useful error message: drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_host_fabric_name() falls through to next function qla2x00_get_starget_node_name() Also add some information about this warning and its potential causes to the documentation. Reported-by: kbuild test robot Signed-off-by: Josh Poimboeuf Cc: Alexander Shishkin Cc: Andy Lutomirski Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/caa4ec6c687931db805e692d4e4bf06cd87d33e6.1460729697.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar diff --git a/tools/objtool/Documentation/stack-validation.txt b/tools/objtool/Documentation/stack-validation.txt index 5a95896..55a60d3 100644 --- a/tools/objtool/Documentation/stack-validation.txt +++ b/tools/objtool/Documentation/stack-validation.txt @@ -299,18 +299,38 @@ they mean, and suggestions for how to fix them. Errors in .c files ------------------ -If you're getting an objtool error in a compiled .c file, chances are -the file uses an asm() statement which has a "call" instruction. An -asm() statement with a call instruction must declare the use of the -stack pointer in its output operand. For example, on x86_64: +1. c_file.o: warning: objtool: funcA() falls through to next function funcB() - register void *__sp asm("rsp"); - asm volatile("call func" : "+r" (__sp)); + This means that funcA() doesn't end with a return instruction or an + unconditional jump, and that objtool has determined that the function + can fall through into the next function. There could be different + reasons for this: -Otherwise the stack frame may not get created before the call. + 1) funcA()'s last instruction is a call to a "noreturn" function like + panic(). In this case the noreturn function needs to be added to + objtool's hard-coded global_noreturns array. Feel free to bug the + objtool maintainer, or you can submit a patch. -Another possible cause for errors in C code is if the Makefile removes --fno-omit-frame-pointer or adds -fomit-frame-pointer to the gcc options. + 2) funcA() uses the unreachable() annotation in a section of code + that is actually reachable. + + 3) If funcA() calls an inline function, the object code for funcA() + might be corrupt due to a gcc bug. For more details, see: + https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70646 + +2. If you're getting any other objtool error in a compiled .c file, it + may be because the file uses an asm() statement which has a "call" + instruction. An asm() statement with a call instruction must declare + the use of the stack pointer in its output operand. For example, on + x86_64: + + register void *__sp asm("rsp"); + asm volatile("call func" : "+r" (__sp)); + + Otherwise the stack frame may not get created before the call. + +3. Another possible cause for errors in C code is if the Makefile removes + -fno-omit-frame-pointer or adds -fomit-frame-pointer to the gcc options. Also see the above section for .S file errors for more information what the individual error messages mean. diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c index 157a0f9..e8a1e69 100644 --- a/tools/objtool/builtin-check.c +++ b/tools/objtool/builtin-check.c @@ -54,6 +54,7 @@ struct instruction { struct symbol *call_dest; struct instruction *jump_dest; struct list_head alts; + struct symbol *func; }; struct alternative { @@ -66,7 +67,7 @@ struct objtool_file { struct list_head insn_list; DECLARE_HASHTABLE(insn_hash, 16); struct section *rodata, *whitelist; - bool ignore_unreachables; + bool ignore_unreachables, c_file; }; const char *objname; @@ -229,7 +230,7 @@ static int __dead_end_function(struct objtool_file *file, struct symbol *func, } } - if (insn->type == INSN_JUMP_DYNAMIC) + if (insn->type == INSN_JUMP_DYNAMIC && list_empty(&insn->alts)) /* sibling call */ return 0; } @@ -249,6 +250,7 @@ static int dead_end_function(struct objtool_file *file, struct symbol *func) static int decode_instructions(struct objtool_file *file) { struct section *sec; + struct symbol *func; unsigned long offset; struct instruction *insn; int ret; @@ -282,6 +284,21 @@ static int decode_instructions(struct objtool_file *file) hash_add(file->insn_hash, &insn->hash, insn->offset); list_add_tail(&insn->list, &file->insn_list); } + + list_for_each_entry(func, &sec->symbol_list, list) { + if (func->type != STT_FUNC) + continue; + + if (!find_insn(file, sec, func->offset)) { + WARN("%s(): can't find starting instruction", + func->name); + return -1; + } + + func_for_each_insn(file, func, insn) + if (!insn->func) + insn->func = func; + } } return 0; @@ -824,6 +841,7 @@ static int validate_branch(struct objtool_file *file, struct alternative *alt; struct instruction *insn; struct section *sec; + struct symbol *func = NULL; unsigned char state; int ret; @@ -838,6 +856,16 @@ static int validate_branch(struct objtool_file *file, } while (1) { + if (file->c_file && insn->func) { + if (func && func != insn->func) { + WARN("%s() falls through to next function %s()", + func->name, insn->func->name); + return 1; + } + + func = insn->func; + } + if (insn->visited) { if (frame_state(insn->state) != frame_state(state)) { WARN_FUNC("frame pointer state mismatch", @@ -848,13 +876,6 @@ static int validate_branch(struct objtool_file *file, return 0; } - /* - * Catch a rare case where a noreturn function falls through to - * the next function. - */ - if (is_fentry_call(insn) && (state & STATE_FENTRY)) - return 0; - insn->visited = true; insn->state = state; @@ -1060,12 +1081,8 @@ static int validate_functions(struct objtool_file *file) continue; insn = find_insn(file, sec, func->offset); - if (!insn) { - WARN("%s(): can't find starting instruction", - func->name); - warnings++; + if (!insn) continue; - } ret = validate_branch(file, insn, 0); warnings += ret; @@ -1162,6 +1179,7 @@ int cmd_check(int argc, const char **argv) file.whitelist = find_section_by_name(file.elf, "__func_stack_frame_non_standard"); file.rodata = find_section_by_name(file.elf, ".rodata"); file.ignore_unreachables = false; + file.c_file = find_section_by_name(file.elf, ".comment"); ret = decode_sections(&file); if (ret < 0) -- cgit v0.10.2 From 1e2ae9ec072f3b7887f456426bc2cf23b80f661a Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Fri, 15 Apr 2016 15:50:32 +0200 Subject: x86/hyperv: Avoid reporting bogus NMI status for Gen2 instances Generation2 instances don't support reporting the NMI status on port 0x61, read from there returns 'ff' and we end up reporting nonsensical PCI error (as there is no PCI bus in these instances) on all NMIs: NMI: PCI system error (SERR) for reason ff on CPU 0. Dazed and confused, but trying to continue Fix the issue by overriding x86_platform.get_nmi_reason. Use 'booted on EFI' flag to detect Gen2 instances. Signed-off-by: Vitaly Kuznetsov Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Cathy Avery Cc: Haiyang Zhang Cc: Jiri Olsa Cc: K. Y. Srinivasan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/1460728232-31433-1-git-send-email-vkuznets@redhat.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index 4e7c693..10c11b4 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -152,6 +152,11 @@ static struct clocksource hyperv_cs = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static unsigned char hv_get_nmi_reason(void) +{ + return 0; +} + static void __init ms_hyperv_init_platform(void) { /* @@ -191,6 +196,13 @@ static void __init ms_hyperv_init_platform(void) machine_ops.crash_shutdown = hv_machine_crash_shutdown; #endif mark_tsc_unstable("running on Hyper-V"); + + /* + * Generation 2 instances don't support reading the NMI status from + * 0x61 port. + */ + if (efi_enabled(EFI_BOOT)) + x86_platform.get_nmi_reason = hv_get_nmi_reason; } const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = { -- cgit v0.10.2 From a7c556546f610a331c22cb7edd9d1afe63f0cd52 Mon Sep 17 00:00:00 2001 From: Qing Huang Date: Thu, 14 Apr 2016 10:43:26 -0700 Subject: RDS: fix endianness for dp_ack_seq dp->dp_ack_seq is used in big endian format. We need to do the big endianness conversion when we assign a value in host format to it. Signed-off-by: Qing Huang Signed-off-by: Santosh Shilimkar Signed-off-by: David S. Miller diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c index 8764970..310cabc 100644 --- a/net/rds/ib_cm.c +++ b/net/rds/ib_cm.c @@ -194,7 +194,7 @@ static void rds_ib_cm_fill_conn_param(struct rds_connection *conn, dp->dp_protocol_major = RDS_PROTOCOL_MAJOR(protocol_version); dp->dp_protocol_minor = RDS_PROTOCOL_MINOR(protocol_version); dp->dp_protocol_minor_mask = cpu_to_be16(RDS_IB_SUPPORTED_PROTOCOLS); - dp->dp_ack_seq = rds_ib_piggyb_ack(ic); + dp->dp_ack_seq = cpu_to_be64(rds_ib_piggyb_ack(ic)); /* Advertise flow control */ if (ic->i_flowctl) { -- cgit v0.10.2 From e47db94e10447fc467777a40302f2b393e9af2fa Mon Sep 17 00:00:00 2001 From: "santosh.shilimkar@oracle.com" Date: Thu, 14 Apr 2016 10:43:27 -0700 Subject: RDS: Fix the atomicity for congestion map update Two different threads with different rds sockets may be in rds_recv_rcvbuf_delta() via receive path. If their ports both map to the same word in the congestion map, then using non-atomic ops to update it could cause the map to be incorrect. Lets use atomics to avoid such an issue. Full credit to Wengang for finding the issue, analysing it and also pointing out to offending code with spin lock based fix. Reviewed-by: Leon Romanovsky Signed-off-by: Wengang Wang Signed-off-by: Santosh Shilimkar Signed-off-by: David S. Miller diff --git a/net/rds/cong.c b/net/rds/cong.c index e6144b8..6641bcf 100644 --- a/net/rds/cong.c +++ b/net/rds/cong.c @@ -299,7 +299,7 @@ void rds_cong_set_bit(struct rds_cong_map *map, __be16 port) i = be16_to_cpu(port) / RDS_CONG_MAP_PAGE_BITS; off = be16_to_cpu(port) % RDS_CONG_MAP_PAGE_BITS; - __set_bit_le(off, (void *)map->m_page_addrs[i]); + set_bit_le(off, (void *)map->m_page_addrs[i]); } void rds_cong_clear_bit(struct rds_cong_map *map, __be16 port) @@ -313,7 +313,7 @@ void rds_cong_clear_bit(struct rds_cong_map *map, __be16 port) i = be16_to_cpu(port) / RDS_CONG_MAP_PAGE_BITS; off = be16_to_cpu(port) % RDS_CONG_MAP_PAGE_BITS; - __clear_bit_le(off, (void *)map->m_page_addrs[i]); + clear_bit_le(off, (void *)map->m_page_addrs[i]); } static int rds_cong_test_bit(struct rds_cong_map *map, __be16 port) -- cgit v0.10.2 From 65fa40276ac1318e75264e5a204547b57c2cf397 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Thu, 14 Apr 2016 14:42:07 -0400 Subject: net: dsa: mv88e6xxx: unlock DSA and CPU ports Locking a port generates an hardware interrupt when a new SA address is received. This enables CPU directed learning, which is needed for 802.1X MAC authentication. To disable automatic learning on a port, the only configuration needed is to set its Port Association Vector to all zero. Clear PAV when SA learning should be disabled instead of locking a port. Fixes: 4c7ea3c0791e ("net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports") Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 50454be..028ebe2 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -2478,7 +2478,7 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port) reg = 1 << port; /* Disable learning for DSA and CPU ports */ if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) - reg = PORT_ASSOC_VECTOR_LOCKED_PORT; + reg = 0; ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_ASSOC_VECTOR, reg); if (ret) -- cgit v0.10.2 From 996ecb8246676100af2a4dc1cfed747712a3c85f Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Thu, 14 Apr 2016 14:42:08 -0400 Subject: net: dsa: mv88e6xxx: enable SA learning on DSA ports In multi-chip systems, DSA Tag ports must learn SA addresses in order to correctly switch frames between interconnected chips. This fixes cross-chip hardware bridging in a VLAN filtering aware system, because a bridge group gets implemented as an hardware 802.1Q VLAN and thus DSA and user ports share the same FDB. Fixes: 4c7ea3c0791e ("net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports") Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 028ebe2..169c948 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -2476,8 +2476,8 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port) * the other bits clear. */ reg = 1 << port; - /* Disable learning for DSA and CPU ports */ - if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) + /* Disable learning for CPU port */ + if (dsa_is_cpu_port(ds, port)) reg = 0; ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_ASSOC_VECTOR, reg); -- cgit v0.10.2 From 207afda1b5036009e611df2106e6d441be397bee Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Thu, 14 Apr 2016 14:42:09 -0400 Subject: net: dsa: mv88e6xxx: share the same default FDB For hardware cross-chip bridging to work, user ports *and* DSA ports need to share a common address database, in order to switch a frame to the correct interconnected device. This is currently working for VLAN filtering aware systems, since Linux will implement a bridge group as a 802.1Q VLAN, which has its own FDB, including DSA and CPU links as members. However when the system doesn't support VLAN filtering, Linux only relies on the port-based VLAN to implement a bridge group. To fix hardware cross-chip bridging for such systems, set the same default address database 0 for user and DSA ports, instead of giving them all a different default database. Note that the bridging code prevents frames to egress between unbridged ports, and flushes FDB entries of a port when changing its STP state. Also note that the FID 0 is special and means "all" for ATU operations, but it's OK since it is used as a default forwarding address database. Fixes: 2db9ce1fd9a3 ("net: dsa: mv88e6xxx: assign default FDB to ports") Fixes: 466dfa077022 ("net: dsa: mv88e6xxx: assign dynamic FDB to bridges") Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 169c948..a290402 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -2181,27 +2181,10 @@ int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *bridge) { struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); - u16 fid; int i, err; mutex_lock(&ps->smi_mutex); - /* Get or create the bridge FID and assign it to the port */ - for (i = 0; i < ps->num_ports; ++i) - if (ps->ports[i].bridge_dev == bridge) - break; - - if (i < ps->num_ports) - err = _mv88e6xxx_port_fid_get(ds, i, &fid); - else - err = _mv88e6xxx_fid_new(ds, &fid); - if (err) - goto unlock; - - err = _mv88e6xxx_port_fid_set(ds, port, fid); - if (err) - goto unlock; - /* Assign the bridge and remap each port's VLANTable */ ps->ports[port].bridge_dev = bridge; @@ -2213,7 +2196,6 @@ int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, } } -unlock: mutex_unlock(&ps->smi_mutex); return err; @@ -2223,16 +2205,10 @@ void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port) { struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); struct net_device *bridge = ps->ports[port].bridge_dev; - u16 fid; int i; mutex_lock(&ps->smi_mutex); - /* Give the port a fresh Filtering Information Database */ - if (_mv88e6xxx_fid_new(ds, &fid) || - _mv88e6xxx_port_fid_set(ds, port, fid)) - netdev_warn(ds->ports[port], "failed to assign a new FID\n"); - /* Unassign the bridge and remap each port's VLANTable */ ps->ports[port].bridge_dev = NULL; @@ -2558,11 +2534,11 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port) if (ret) goto abort; - /* Port based VLAN map: give each port its own address + /* Port based VLAN map: give each port the same default address * database, and allow bidirectional communication between the * CPU and DSA port(s), and the other ports. */ - ret = _mv88e6xxx_port_fid_set(ds, port, port + 1); + ret = _mv88e6xxx_port_fid_set(ds, port, 0); if (ret) goto abort; -- cgit v0.10.2 From 6517eb59b03965689e6bb16bb2d480096b3ef95d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 15 Apr 2016 10:47:52 -0700 Subject: net: bcmgenet: device stats are unsigned long On 64bit kernels, device stats are 64bit wide, not 32bit. Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Eric Dumazet Cc: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index cf6445d..44ad149 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -878,7 +878,11 @@ static void bcmgenet_get_ethtool_stats(struct net_device *dev, else p = (char *)priv; p += s->stat_offset; - data[i] = *(u32 *)p; + if (sizeof(unsigned long) != sizeof(u32) && + s->stat_sizeof == sizeof(unsigned long)) + data[i] = *(unsigned long *)p; + else + data[i] = *(u32 *)p; } } -- cgit v0.10.2 From 50fd4987c4f3c3ebf0ce94d932732011bbdc7c71 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 17 Apr 2016 09:39:41 +0200 Subject: ALSA: hda - Don't trust the reported actual power state We've got a regression report that the recording on Mac with a cirrus codec doesn't work any longer. This turned out to be the missing power up to D0 by power_save_node enablement. After analyzing the traces, we found out that the culprit is that the codec advertises the "actual" power state of a few nodes to be D0 while the "target" power state is D3. This inconsistency is usually OK, as it implies the power transition. But in the case of cirrus codec, this seems to be stuck to D3 while it's not actually D0. This patch addresses the issue by checking the power state difference more strictly. It sends the power-state change verb unless both the target and the actual power states show the given value. We may introduce yet another flag indicating the possible broken hardware power state, but it's anyway safer to set the proper power state even in a transition (at least it's harmless as long as the target state is same). So this simpler change was applied now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171 Cc: # v4.4+ Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 7ca5b89..dfaf1a9 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -826,7 +826,7 @@ static hda_nid_t path_power_update(struct hda_codec *codec, bool allow_powerdown) { hda_nid_t nid, changed = 0; - int i, state; + int i, state, power; for (i = 0; i < path->depth; i++) { nid = path->path[i]; @@ -838,7 +838,9 @@ static hda_nid_t path_power_update(struct hda_codec *codec, state = AC_PWRST_D0; else state = AC_PWRST_D3; - if (!snd_hda_check_power_state(codec, nid, state)) { + power = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_POWER_STATE, 0); + if (power != (state | (state << 4))) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, state); changed = nid; -- cgit v0.10.2 From ca3704c23a3b3dfc9d721cf21953fd6b3cbfc3e0 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Sun, 17 Apr 2016 05:20:32 -0700 Subject: Input: arizona-haptic - don't assign input_dev parent We shouldn't assign the parent device of the input_dev to be the parent MFD device, because this will be used for devres which causes input_unregister_device to run after the haptics device has been removed, since it is itself a child of the MFD device. The default of using the haptics device itself as the parent is correct. Signed-off-by: Charles Keepax Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c index d5994a7..9829363 100644 --- a/drivers/input/misc/arizona-haptics.c +++ b/drivers/input/misc/arizona-haptics.c @@ -178,7 +178,6 @@ static int arizona_haptics_probe(struct platform_device *pdev) input_set_drvdata(haptics->input_dev, haptics); haptics->input_dev->name = "arizona:haptics"; - haptics->input_dev->dev.parent = pdev->dev.parent; haptics->input_dev->close = arizona_haptics_close; __set_bit(FF_RUMBLE, haptics->input_dev->ffbit); -- cgit v0.10.2 From eda5ecc0a6b865561997e177c393f0b0136fe3b7 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Sun, 17 Apr 2016 05:21:42 -0700 Subject: Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay The trigger delay algorithm that converts from microseconds to the register value looks incorrect. According to most of the PMIC documentation, the equation is delay (Seconds) = (1 / 1024) * 2 ^ (x + 4) except for one case where the documentation looks to have a formatting issue and the equation looks like delay (Seconds) = (1 / 1024) * 2 x + 4 Most likely this driver was written with the improper documentation to begin with. According to the downstream sources the valid delays are from 2 seconds to 1/64 second, and the latter equation just doesn't make sense for that. Let's fix the algorithm and the range check to match the documentation and the downstream sources. Reported-by: Bjorn Andersson Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key") Signed-off-by: Stephen Boyd Tested-by: John Stultz Acked-by: Bjorn Andersson Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c index 3f02e0e..67aab86 100644 --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -353,7 +353,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay)) kpd_delay = 15625; - if (kpd_delay > 62500 || kpd_delay == 0) { + /* Valid range of pwr key trigger delay is 1/64 sec to 2 seconds. */ + if (kpd_delay > USEC_PER_SEC * 2 || kpd_delay < USEC_PER_SEC / 64) { dev_err(&pdev->dev, "invalid power key trigger delay\n"); return -EINVAL; } @@ -385,8 +386,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) pwr->name = "pmic8xxx_pwrkey"; pwr->phys = "pmic8xxx_pwrkey/input0"; - delay = (kpd_delay << 10) / USEC_PER_SEC; - delay = 1 + ilog2(delay); + delay = (kpd_delay << 6) / USEC_PER_SEC; + delay = ilog2(delay); err = regmap_read(regmap, PON_CNTL_1, &pon_cntl); if (err < 0) { -- cgit v0.10.2 From ab2ed0171a50ddee8390f472bb83f60d393b4b04 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 17 Apr 2016 11:19:55 +0200 Subject: macsec: fix crypto Kconfig dependency The new MACsec driver uses the AES crypto algorithm, but can be configured even if CONFIG_CRYPTO is disabled, leading to a build error: warning: (MAC80211 && MACSEC) selects CRYPTO_GCM which has unmet direct dependencies (CRYPTO) warning: (BT && CEPH_LIB && INET && MAC802154 && MAC80211 && BLK_DEV_RBD && MACSEC && AIRO_CS && LIBIPW && HOSTAP && USB_WUSB && RTLLIB_CRYPTO_CCMP && FS_ENCRYPTION && EXT4_ENCRYPTION && CEPH_FS && BIG_KEYS && ENCRYPTED_KEYS) selects CRYPTO_AES which has unmet direct dependencies (CRYPTO) crypto/built-in.o: In function `gcm_enc_copy_hash': aes_generic.c:(.text+0x2b8): undefined reference to `crypto_xor' aes_generic.c:(.text+0x2dc): undefined reference to `scatterwalk_map_and_copy' This adds an explicit 'select CRYPTO' statement the way that other drivers handle it. Signed-off-by: Arnd Bergmann Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: David S. Miller diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2a1ba62b..a24c18e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -195,6 +195,7 @@ config GENEVE config MACSEC tristate "IEEE 802.1AE MAC-level encryption (MACsec)" + select CRYPTO select CRYPTO_AES select CRYPTO_GCM ---help--- -- cgit v0.10.2 From ed0739b577f2ddd53835f1e20d014fccab195c42 Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Mon, 18 Apr 2016 09:16:28 +0800 Subject: ALSA - hda: hdmi check NULL pointer in hdmi_set_chmap Make sure per_pin is not NULL before using it. Fixes: 9b3dc8aa3fb1 ('ALSA: hda - Register chmap obj as priv data instead of codec') Signed-off-by: Libin Yang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index c83c1a8..40933aa 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1858,6 +1858,8 @@ static void hdmi_set_chmap(struct hdac_device *hdac, int pcm_idx, struct hdmi_spec *spec = codec->spec; struct hdmi_spec_per_pin *per_pin = pcm_idx_to_pin(spec, pcm_idx); + if (!per_pin) + return; mutex_lock(&per_pin->lock); per_pin->chmap_set = true; memcpy(per_pin->chmap, chmap, ARRAY_SIZE(per_pin->chmap)); -- cgit v0.10.2 From f36fdacc5fcdca7b0c0d89f031fcdc89717e0be3 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 23 Feb 2016 11:01:38 +0100 Subject: video: ARM CLCD: runtime check for Versatile The current compile-time check for inversed IENB/CNTL does not work in multiplatform boots: as soon as versatile is included in the build, the IENB/CNTL is switched and breaks graphics. Convert this to a runtime switch. Cc: stable@vger.kernel.org Cc: Rob Herring Cc: Russell King Fixes: a29da136de34 ("ARM: versatile: convert to multi-platform") Signed-off-by: Linus Walleij Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c index fe274b5..93e66a9 100644 --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -440,13 +440,14 @@ static int clcdfb_register(struct clcd_fb *fb) fb->off_ienb = CLCD_PL111_IENB; fb->off_cntl = CLCD_PL111_CNTL; } else { -#ifdef CONFIG_ARCH_VERSATILE - fb->off_ienb = CLCD_PL111_IENB; - fb->off_cntl = CLCD_PL111_CNTL; -#else - fb->off_ienb = CLCD_PL110_IENB; - fb->off_cntl = CLCD_PL110_CNTL; -#endif + if (of_machine_is_compatible("arm,versatile-ab") || + of_machine_is_compatible("arm,versatile-pb")) { + fb->off_ienb = CLCD_PL111_IENB; + fb->off_cntl = CLCD_PL111_CNTL; + } else { + fb->off_ienb = CLCD_PL110_IENB; + fb->off_cntl = CLCD_PL110_CNTL; + } } fb->clk = clk_get(&fb->dev->dev, NULL); -- cgit v0.10.2 From 4dacad61514494f2eba9e60d5b4aa71971dac6a1 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 23 Mar 2016 00:51:54 +0200 Subject: omapfb: panel-sharp-ls037v7dw01: fix check of gpio_to_desc() return value The change fixes a check of gpio_to_desc() return value, the function returns either a valid pointer to struct gpio_desc or NULL, this makes IS_ERR() check invalid and may lead to a NULL pointer dereference in runtime. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Tomi Valkeinen diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c index abfd1f6..1954ec9 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c @@ -200,20 +200,16 @@ static struct omap_dss_driver sharp_ls_ops = { static int sharp_ls_get_gpio(struct device *dev, int gpio, unsigned long flags, char *desc, struct gpio_desc **gpiod) { - struct gpio_desc *gd; int r; - *gpiod = NULL; - r = devm_gpio_request_one(dev, gpio, flags, desc); - if (r) + if (r) { + *gpiod = NULL; return r == -ENOENT ? 0 : r; + } - gd = gpio_to_desc(gpio); - if (IS_ERR(gd)) - return PTR_ERR(gd) == -ENOENT ? 0 : PTR_ERR(gd); + *gpiod = gpio_to_desc(gpio); - *gpiod = gd; return 0; } -- cgit v0.10.2 From 6e1c7d6103fe7031035cec321307c6356809adf4 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 15 Apr 2016 14:06:57 +0300 Subject: mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs Baytrail eMMC/SD/SDIO host controllers have been known to hang. A change to a hardware setting has been found to reduce the occurrence of such hangs. This patch ensures the correct setting. This patch applies cleanly to v4.4+. It could go to earlier kernels also, so I will send backports to the stable list in due course. Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 04feea8..e657af0 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -97,6 +97,7 @@ config MMC_RICOH_MMC config MMC_SDHCI_ACPI tristate "SDHCI support for ACPI enumerated SDHCI controllers" depends on MMC_SDHCI && ACPI + select IOSF_MBI if X86 help This selects support for ACPI enumerated SDHCI controllers, identified by ACPI Compatibility ID PNP0D40 or specific diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 6839e41..bed6a49 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -41,6 +41,11 @@ #include #include +#ifdef CONFIG_X86 +#include +#include +#endif + #include "sdhci.h" enum { @@ -116,6 +121,75 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = { .ops = &sdhci_acpi_ops_int, }; +#ifdef CONFIG_X86 + +static bool sdhci_acpi_byt(void) +{ + static const struct x86_cpu_id byt[] = { + { X86_VENDOR_INTEL, 6, 0x37 }, + {} + }; + + return x86_match_cpu(byt); +} + +#define BYT_IOSF_SCCEP 0x63 +#define BYT_IOSF_OCP_NETCTRL0 0x1078 +#define BYT_IOSF_OCP_TIMEOUT_BASE GENMASK(10, 8) + +static void sdhci_acpi_byt_setting(struct device *dev) +{ + u32 val = 0; + + if (!sdhci_acpi_byt()) + return; + + if (iosf_mbi_read(BYT_IOSF_SCCEP, MBI_CR_READ, BYT_IOSF_OCP_NETCTRL0, + &val)) { + dev_err(dev, "%s read error\n", __func__); + return; + } + + if (!(val & BYT_IOSF_OCP_TIMEOUT_BASE)) + return; + + val &= ~BYT_IOSF_OCP_TIMEOUT_BASE; + + if (iosf_mbi_write(BYT_IOSF_SCCEP, MBI_CR_WRITE, BYT_IOSF_OCP_NETCTRL0, + val)) { + dev_err(dev, "%s write error\n", __func__); + return; + } + + dev_dbg(dev, "%s completed\n", __func__); +} + +static bool sdhci_acpi_byt_defer(struct device *dev) +{ + if (!sdhci_acpi_byt()) + return false; + + if (!iosf_mbi_available()) + return true; + + sdhci_acpi_byt_setting(dev); + + return false; +} + +#else + +static inline void sdhci_acpi_byt_setting(struct device *dev) +{ +} + +static inline bool sdhci_acpi_byt_defer(struct device *dev) +{ + return false; +} + +#endif + static int bxt_get_cd(struct mmc_host *mmc) { int gpio_cd = mmc_gpio_get_cd(mmc); @@ -322,6 +396,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev) if (acpi_bus_get_status(device) || !device->status.present) return -ENODEV; + if (sdhci_acpi_byt_defer(dev)) + return -EPROBE_DEFER; + hid = acpi_device_hid(device); uid = device->pnp.unique_id; @@ -447,6 +524,8 @@ static int sdhci_acpi_resume(struct device *dev) { struct sdhci_acpi_host *c = dev_get_drvdata(dev); + sdhci_acpi_byt_setting(&c->pdev->dev); + return sdhci_resume_host(c->host); } @@ -470,6 +549,8 @@ static int sdhci_acpi_runtime_resume(struct device *dev) { struct sdhci_acpi_host *c = dev_get_drvdata(dev); + sdhci_acpi_byt_setting(&c->pdev->dev); + return sdhci_runtime_resume_host(c->host); } -- cgit v0.10.2 From 138b8638bb43d4b85eeaacde9be9c687cc7e5de7 Mon Sep 17 00:00:00 2001 From: John Youn Date: Fri, 8 Apr 2016 14:46:31 -0700 Subject: usb: gadget: composite: Clear reserved fields of SSP Dev Cap Set the reserved fields of the SuperSpeed Plus Device Capability descriptor to 0. Otherwise there might be stale data there which will cause USB CV to fail. Fixes: f228a8de242a ("usb: gadget: composite: Return SSP Dev Cap descriptor") Signed-off-by: John Youn Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index de9ffd6..524e233 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -651,6 +651,8 @@ static int bos_desc(struct usb_composite_dev *cdev) ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(1); ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE; + ssp_cap->bReserved = 0; + ssp_cap->wReserved = 0; /* SSAC = 1 (2 attributes) */ ssp_cap->bmAttributes = cpu_to_le32(1); -- cgit v0.10.2 From 45d49cb706e5d8f0ca5e868118b5d453afbb938f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 11 Apr 2016 17:12:33 +0300 Subject: usb: dwc3: omap: fix up error path on probe() Even if pm_runtime_get*() fails, we *MUST* call pm_runtime_put_sync() before disabling PM. While at it, remove superfluous dwc3_omap_disable_irqs() in error path. Signed-off-by: Felipe Balbi [nsekhar@ti.com: patch description updates] Signed-off-by: Sekhar Nori Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 22e9606..55da2c7 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -496,7 +496,7 @@ static int dwc3_omap_probe(struct platform_device *pdev) ret = pm_runtime_get_sync(dev); if (ret < 0) { dev_err(dev, "get_sync failed with err %d\n", ret); - goto err0; + goto err1; } dwc3_omap_map_offset(omap); @@ -516,28 +516,24 @@ static int dwc3_omap_probe(struct platform_device *pdev) ret = dwc3_omap_extcon_register(omap); if (ret < 0) - goto err2; + goto err1; ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(&pdev->dev, "failed to create dwc3 core\n"); - goto err3; + goto err2; } dwc3_omap_enable_irqs(omap); return 0; -err3: +err2: extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb); extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb); -err2: - dwc3_omap_disable_irqs(omap); err1: pm_runtime_put_sync(dev); - -err0: pm_runtime_disable(dev); return ret; -- cgit v0.10.2 From 5c4ad318de3b8e8680d654c82a254c4b65243739 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 11 Apr 2016 17:12:34 +0300 Subject: usb: dwc3: core: fix PHY handling during suspend we need to power off the PHY during suspend and power it back on during resume. Signed-off-by: Felipe Balbi [nsekhar@ti.com: fix call to usb_phy_set_suspend() in dwc3_suspend()] Signed-off-by: Sekhar Nori Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index fa20f5a9..34277ce 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1150,6 +1150,11 @@ static int dwc3_suspend(struct device *dev) phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); + usb_phy_set_suspend(dwc->usb2_phy, 1); + usb_phy_set_suspend(dwc->usb3_phy, 1); + WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0); + WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0); + pinctrl_pm_select_sleep_state(dev); return 0; @@ -1163,11 +1168,21 @@ static int dwc3_resume(struct device *dev) pinctrl_pm_select_default_state(dev); + usb_phy_set_suspend(dwc->usb2_phy, 0); + usb_phy_set_suspend(dwc->usb3_phy, 0); + ret = phy_power_on(dwc->usb2_generic_phy); + if (ret < 0) + return ret; + + ret = phy_power_on(dwc->usb3_generic_phy); + if (ret < 0) + goto err_usb2phy_power; + usb_phy_init(dwc->usb3_phy); usb_phy_init(dwc->usb2_phy); ret = phy_init(dwc->usb2_generic_phy); if (ret < 0) - return ret; + goto err_usb3phy_power; ret = phy_init(dwc->usb3_generic_phy); if (ret < 0) @@ -1200,6 +1215,12 @@ static int dwc3_resume(struct device *dev) err_usb2phy_init: phy_exit(dwc->usb2_generic_phy); +err_usb3phy_power: + phy_power_off(dwc->usb3_generic_phy); + +err_usb2phy_power: + phy_power_off(dwc->usb2_generic_phy); + return ret; } -- cgit v0.10.2 From e6bdf8195b4a43ebff71f25fc7ca5e436e79161a Mon Sep 17 00:00:00 2001 From: "Du, Changbin" Date: Tue, 12 Apr 2016 16:24:34 +0800 Subject: usb: dwc3: fix memory leak of dwc->regset dwc->regset is allocated on dwc3_debugfs_init, and should be released on init failure or dwc3_debugfs_exit. Btw, The line "dwc->root = NULL" is unnecessary, so remove it. Signed-off-by: Du, Changbin [ felipe.balbi@linux.intel.com : add another err label for the new error condition ] Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 9ac37fe..cebf9e3 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -645,7 +645,7 @@ int dwc3_debugfs_init(struct dwc3 *dwc) file = debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); if (!file) { ret = -ENOMEM; - goto err1; + goto err2; } if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { @@ -653,7 +653,7 @@ int dwc3_debugfs_init(struct dwc3 *dwc) dwc, &dwc3_mode_fops); if (!file) { ret = -ENOMEM; - goto err1; + goto err2; } } @@ -663,19 +663,22 @@ int dwc3_debugfs_init(struct dwc3 *dwc) dwc, &dwc3_testmode_fops); if (!file) { ret = -ENOMEM; - goto err1; + goto err2; } file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, dwc, &dwc3_link_state_fops); if (!file) { ret = -ENOMEM; - goto err1; + goto err2; } } return 0; +err2: + kfree(dwc->regset); + err1: debugfs_remove_recursive(root); @@ -686,5 +689,5 @@ err0: void dwc3_debugfs_exit(struct dwc3 *dwc) { debugfs_remove_recursive(dwc->root); - dwc->root = NULL; + kfree(dwc->regset); } -- cgit v0.10.2 From 9772b47a4c2916d645c551228b6085ea24acbe5d Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 12 Apr 2016 11:33:29 +0300 Subject: usb: dwc3: gadget: Fix suspend/resume during device mode Gadget controller might not be always active during system suspend/resume as gadget driver might not have yet been loaded or might have been unloaded prior to system suspend. Check if we're active and only then perform necessary actions during suspend/resume. Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index d54a028..8e4a1b1 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2936,6 +2936,9 @@ void dwc3_gadget_exit(struct dwc3 *dwc) int dwc3_gadget_suspend(struct dwc3 *dwc) { + if (!dwc->gadget_driver) + return 0; + if (dwc->pullups_connected) { dwc3_gadget_disable_irq(dwc); dwc3_gadget_run_stop(dwc, true, true); @@ -2954,6 +2957,9 @@ int dwc3_gadget_resume(struct dwc3 *dwc) struct dwc3_ep *dep; int ret; + if (!dwc->gadget_driver) + return 0; + /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); -- cgit v0.10.2 From 9aec6a08f1163fb24c23f9036891e1d5bab3f1be Mon Sep 17 00:00:00 2001 From: "Kumar, Mahesh" Date: Wed, 6 Apr 2016 08:26:39 -0700 Subject: drm/i915/skl+: Use plane size for relative data rate calculation Use plane size for relative data rate calculation. don't always use pipe source width & height. adjust height & width according to rotation. use plane size for watermark calculations also. v2: Address Matt's comments. Use intel_plane_state->visible to avoid divide-by-zero error. Where FB was present but not visible so causing total data rate to be zero, hence divide-by-zero. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93917 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94044 Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Kumar, Mahesh Reviewed-by: Matt Roper Signed-off-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1459956399-1296-1-git-send-email-matthew.d.roper@intel.com (cherry picked from commit a280f7dd9f1a85eed242d0f62498bfc11520a1a3) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 347d4df..8ed3cf3 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2876,25 +2876,28 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate, const struct drm_plane_state *pstate, int y) { - struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc); + struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate); struct drm_framebuffer *fb = pstate->fb; + uint32_t width = 0, height = 0; + + width = drm_rect_width(&intel_pstate->src) >> 16; + height = drm_rect_height(&intel_pstate->src) >> 16; + + if (intel_rotation_90_or_270(pstate->rotation)) + swap(width, height); /* for planar format */ if (fb->pixel_format == DRM_FORMAT_NV12) { if (y) /* y-plane data rate */ - return intel_crtc->config->pipe_src_w * - intel_crtc->config->pipe_src_h * + return width * height * drm_format_plane_cpp(fb->pixel_format, 0); else /* uv-plane data rate */ - return (intel_crtc->config->pipe_src_w/2) * - (intel_crtc->config->pipe_src_h/2) * + return (width / 2) * (height / 2) * drm_format_plane_cpp(fb->pixel_format, 1); } /* for packed formats */ - return intel_crtc->config->pipe_src_w * - intel_crtc->config->pipe_src_h * - drm_format_plane_cpp(fb->pixel_format, 0); + return width * height * drm_format_plane_cpp(fb->pixel_format, 0); } /* @@ -2973,8 +2976,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, struct drm_framebuffer *fb = plane->state->fb; int id = skl_wm_plane_id(intel_plane); - if (fb == NULL) + if (!to_intel_plane_state(plane->state)->visible) continue; + if (plane->type == DRM_PLANE_TYPE_CURSOR) continue; @@ -3000,7 +3004,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, uint16_t plane_blocks, y_plane_blocks = 0; int id = skl_wm_plane_id(intel_plane); - if (pstate->fb == NULL) + if (!to_intel_plane_state(pstate)->visible) continue; if (plane->type == DRM_PLANE_TYPE_CURSOR) continue; @@ -3123,26 +3127,36 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv, { struct drm_plane *plane = &intel_plane->base; struct drm_framebuffer *fb = plane->state->fb; + struct intel_plane_state *intel_pstate = + to_intel_plane_state(plane->state); uint32_t latency = dev_priv->wm.skl_latency[level]; uint32_t method1, method2; uint32_t plane_bytes_per_line, plane_blocks_per_line; uint32_t res_blocks, res_lines; uint32_t selected_result; uint8_t cpp; + uint32_t width = 0, height = 0; - if (latency == 0 || !cstate->base.active || !fb) + if (latency == 0 || !cstate->base.active || !intel_pstate->visible) return false; + width = drm_rect_width(&intel_pstate->src) >> 16; + height = drm_rect_height(&intel_pstate->src) >> 16; + + if (intel_rotation_90_or_270(plane->state->rotation)) + swap(width, height); + cpp = drm_format_plane_cpp(fb->pixel_format, 0); method1 = skl_wm_method1(skl_pipe_pixel_rate(cstate), cpp, latency); method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate), cstate->base.adjusted_mode.crtc_htotal, - cstate->pipe_src_w, - cpp, fb->modifier[0], + width, + cpp, + fb->modifier[0], latency); - plane_bytes_per_line = cstate->pipe_src_w * cpp; + plane_bytes_per_line = width * cpp; plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED || -- cgit v0.10.2 From d43f3ebf12f59c57782ec652da65ef61c2662b40 Mon Sep 17 00:00:00 2001 From: Akash Goel Date: Fri, 11 Mar 2016 14:56:42 +0530 Subject: drm/i915: Fixup the free space logic in ring_prepare Currently for the case where there is enough space at the end of Ring buffer for accommodating only the base request, the wrapround is done immediately and as a result the base request gets added at the start of Ring buffer. But there may not be enough free space at the beginning to accommodate the base request, as before the wraparound, the wait was effectively done for the reserved_size free space from the start of Ring buffer. In such a case there is a potential of Ring buffer overflow, the instructions at the head of Ring (ACTHD) can get overwritten. Since the base request can fit in the remaining space, there is no need to wraparound immediately. The wraparound will anyway happen later when the reserved part starts getting used. Cc: Chris Wilson Signed-off-by: Akash Goel Signed-off-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/1457688402-10411-1-git-send-email-akash.goel@intel.com Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org (cherry picked from commit 782f6bc0aba037436d6a04d19b23f8b61020a576) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 6a978ce..48b612d 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -841,11 +841,11 @@ static int logical_ring_prepare(struct drm_i915_gem_request *req, int bytes) if (unlikely(total_bytes > remain_usable)) { /* * The base request will fit but the reserved space - * falls off the end. So only need to to wait for the - * reserved size after flushing out the remainder. + * falls off the end. So don't need an immediate wrap + * and only need to effectively wait for the reserved + * size space from the start of ringbuffer. */ wait_bytes = remain_actual + ringbuf->reserved_size; - need_wrap = true; } else if (total_bytes > ringbuf->space) { /* No wrapping required, just waiting. */ wait_bytes = total_bytes; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 45ce45a..c2ea2cd 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -2454,11 +2454,11 @@ static int __intel_ring_prepare(struct intel_engine_cs *ring, int bytes) if (unlikely(total_bytes > remain_usable)) { /* * The base request will fit but the reserved space - * falls off the end. So only need to to wait for the - * reserved size after flushing out the remainder. + * falls off the end. So don't need an immediate wrap + * and only need to effectively wait for the reserved + * size space from the start of ringbuffer. */ wait_bytes = remain_actual + ringbuf->reserved_size; - need_wrap = true; } else if (total_bytes > ringbuf->space) { /* No wrapping required, just waiting. */ wait_bytes = total_bytes; -- cgit v0.10.2 From db9f9203e27495b2d151b695504e286eec026e9b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 5 Apr 2016 15:00:00 +0100 Subject: drm/i915/userptr: Hold mmref whilst calling get-user-pages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Holding a reference to the containing task_struct is not sufficient to prevent the mm_struct from being reaped under memory pressure. If this happens whilst we are calling get_user_pages(), explosions erupt - sometimes an immediate GPF, sometimes page flag corruption. To prevent the target mm from being reaped as we are reading from it, acquire a reference before we begin. Testcase: igt/gem_shrink/*userptr Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Michał Winiarski Cc: stable@vger.kernel.org Reviewed-by: Michał Winiarski Link: http://patchwork.freedesktop.org/patch/msgid/1459864801-28606-2-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 40313f0cd0b711a7a5905e5182422799e157d8aa) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c index 18ba813..4d30b60 100644 --- a/drivers/gpu/drm/i915/i915_gem_userptr.c +++ b/drivers/gpu/drm/i915/i915_gem_userptr.c @@ -501,19 +501,24 @@ __i915_gem_userptr_get_pages_worker(struct work_struct *_work) if (pvec != NULL) { struct mm_struct *mm = obj->userptr.mm->mm; - down_read(&mm->mmap_sem); - while (pinned < npages) { - ret = get_user_pages_remote(work->task, mm, - obj->userptr.ptr + pinned * PAGE_SIZE, - npages - pinned, - !obj->userptr.read_only, 0, - pvec + pinned, NULL); - if (ret < 0) - break; - - pinned += ret; + ret = -EFAULT; + if (atomic_inc_not_zero(&mm->mm_users)) { + down_read(&mm->mmap_sem); + while (pinned < npages) { + ret = get_user_pages_remote + (work->task, mm, + obj->userptr.ptr + pinned * PAGE_SIZE, + npages - pinned, + !obj->userptr.read_only, 0, + pvec + pinned, NULL); + if (ret < 0) + break; + + pinned += ret; + } + up_read(&mm->mmap_sem); + mmput(mm); } - up_read(&mm->mmap_sem); } mutex_lock(&dev->struct_mutex); -- cgit v0.10.2 From d528a6a0f3fd346bd7cc2de611a4149b6ebaab41 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 5 Apr 2016 15:56:16 +0300 Subject: drm/i915/skl: Fix rc6 based gpu/system hang For all gt3 and gt4 skylake variants, extend the usage of WaRsDisableCoarsePowerGating for all revisions. Without this gt3 and gt4 skylakes up to atleast rev 0xa can gpu hang or system hang. Cc: Abdiel Janulgue Cc: Ben Widawsky Cc: Timo Aaltonen Cc: Reported-by: Mikael Djurfeldt References: https://bugs.freedesktop.org/show_bug.cgi?id=94161 Signed-off-by: Mika Kuoppala Reviewed-by: Ben Widawsky Tested-by: Timo Aaltonen Link: http://patchwork.freedesktop.org/patch/msgid/1459860977-27751-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 185c66e57ce725afeb58a3cfa48547706af3a7af) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 1048093..daba7eb 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2634,8 +2634,9 @@ struct drm_i915_cmd_table { /* WaRsDisableCoarsePowerGating:skl,bxt */ #define NEEDS_WaRsDisableCoarsePowerGating(dev) (IS_BXT_REVID(dev, 0, BXT_REVID_A1) || \ - ((IS_SKL_GT3(dev) || IS_SKL_GT4(dev)) && \ - IS_SKL_REVID(dev, 0, SKL_REVID_F0))) + IS_SKL_GT3(dev) || \ + IS_SKL_GT4(dev)) + /* * dp aux and gmbus irq on gen4 seems to be able to generate legacy interrupts * even when in MSI mode. This results in spurious interrupt warnings if the -- cgit v0.10.2 From 510650e8b2ab965931b35e9813467439d4df0b9c Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Tue, 5 Apr 2016 15:56:17 +0300 Subject: drm/i915/skl: Fix spurious gpu hang with gt3/gt4 revs Experiments with heaven 4.0 benchmark and skylake gt3e (rev 0xa) suggest that WaForceContextSaveRestoreNonCoherent is needed for all revs. Extending this to all revs cures a gpu hang with rev 0xa when running heaven4.0 gpu benchmark. We have been here before, with problems enabling gt4e and extending up to revision F0 instead of false claims of bspec of E0 only. See commit ("drm/i915/skl: Default to noncoherent access up to F0"). In retrospect we should have covered this with this big blanket back then already, as E0 vs F0 discrepancy was suspicious enough. Previously the WaForceEnableNonCoherent has been tied to context non-coherence, atleast in relevant hsds. So keep this tie and extended this alongside. Cc: Abdiel Janulgue Cc: Ben Widawsky Cc: Timo Aaltonen Cc: stable@vger.kernel.org Reported-by: Mike Lothian References: https://bugs.freedesktop.org/show_bug.cgi?id=93491 Signed-off-by: Mika Kuoppala Reviewed-by: Ben Widawsky Tested-by: Timo Aaltonen Link: http://patchwork.freedesktop.org/patch/msgid/1459860977-27751-2-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 97ea6be161c55dec896b65c95157d953c330ae05) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index c2ea2cd..bd7321b 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -968,7 +968,7 @@ static int gen9_init_workarounds(struct intel_engine_cs *ring) /* WaForceContextSaveRestoreNonCoherent:skl,bxt */ tmp = HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT; - if (IS_SKL_REVID(dev, SKL_REVID_F0, SKL_REVID_F0) || + if (IS_SKL_REVID(dev, SKL_REVID_F0, REVID_FOREVER) || IS_BXT_REVID(dev, BXT_REVID_B0, REVID_FOREVER)) tmp |= HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE; WA_SET_BIT_MASKED(HDC_CHICKEN0, tmp); @@ -1085,7 +1085,8 @@ static int skl_init_workarounds(struct intel_engine_cs *ring) WA_SET_BIT_MASKED(HIZ_CHICKEN, BDW_HIZ_POWER_COMPILER_CLOCK_GATING_DISABLE); - if (IS_SKL_REVID(dev, 0, SKL_REVID_F0)) { + /* This is tied to WaForceContextSaveRestoreNonCoherent */ + if (IS_SKL_REVID(dev, 0, REVID_FOREVER)) { /* *Use Force Non-Coherent whenever executing a 3D context. This * is a workaround for a possible hang in the unlikely event -- cgit v0.10.2 From 537d3b10086ffae30efbc7c66777c0a08b58d3e6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Winiarski?= Date: Tue, 12 Apr 2016 15:51:55 +0200 Subject: drm/i915: Adjust size of PIPE_CONTROL used for gen8 render seqno write MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We started to use PIPE_CONTROL to write render ring seqno in order to combat seqno write vs interrupt generation problems. This was introduced by commit 7c17d377374d ("drm/i915: Use ordered seqno write interrupt generation on gen8+ execlists"). On gen8+ size of PIPE_CONTROL with Post Sync Operation should be 6 dwords. When we're using older 5-dword variant it's possible to observe inconsistent values written by PIPE_CONTROL with Post Sync Operation from user batches, resulting in rendering corruptions. v2: Fix BAT failures v3: Comments on alignment and thrashing high dword of seqno (Chris) v4: Updated commit msg (Mika) Testcase: igt/gem_pipe_control_store_loop/*-qword-write Issue: VIZ-7393 Cc: stable@vger.kernel.org Cc: Chris Wilson Cc: Mika Kuoppala Cc: Abdiel Janulgue Signed-off-by: Michał Winiarski Reviewed-by: Mika Kuoppala Reviewed-by: Chris Wilson Tested-by: Abdiel Janulgue Signed-off-by: Mika Kuoppala Link: http://patchwork.freedesktop.org/patch/msgid/1460469115-26002-1-git-send-email-michal.winiarski@intel.com (cherry picked from commit ce81a65c79d6012a384563caf76d47e28947a347) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 48b612d..5c6080f 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1913,15 +1913,18 @@ static int gen8_emit_request_render(struct drm_i915_gem_request *request) struct intel_ringbuffer *ringbuf = request->ringbuf; int ret; - ret = intel_logical_ring_begin(request, 6 + WA_TAIL_DWORDS); + ret = intel_logical_ring_begin(request, 8 + WA_TAIL_DWORDS); if (ret) return ret; + /* We're using qword write, seqno should be aligned to 8 bytes. */ + BUILD_BUG_ON(I915_GEM_HWS_INDEX & 1); + /* w/a for post sync ops following a GPGPU operation we * need a prior CS_STALL, which is emitted by the flush * following the batch. */ - intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(5)); + intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(6)); intel_logical_ring_emit(ringbuf, (PIPE_CONTROL_GLOBAL_GTT_IVB | PIPE_CONTROL_CS_STALL | @@ -1929,7 +1932,10 @@ static int gen8_emit_request_render(struct drm_i915_gem_request *request) intel_logical_ring_emit(ringbuf, hws_seqno_address(request->ring)); intel_logical_ring_emit(ringbuf, 0); intel_logical_ring_emit(ringbuf, i915_gem_request_get_seqno(request)); + /* We're thrashing one dword of HWS. */ + intel_logical_ring_emit(ringbuf, 0); intel_logical_ring_emit(ringbuf, MI_USER_INTERRUPT); + intel_logical_ring_emit(ringbuf, MI_NOOP); return intel_logical_ring_advance_and_submit(request); } -- cgit v0.10.2 From 1b3e885a05d4f0a35dde035724e7c6453d2cbe71 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 13 Apr 2016 17:35:11 +0100 Subject: drm/i915: Force ringbuffers to not be at offset 0 For reasons unknown Sandybridge GT1 (at least) will eventually hang when it encounters a ring wraparound at offset 0. The test case that reproduces the bug reliably forces a large number of interrupted context switches, thereby causing very frequent ring wraparounds, but there are similar bug reports in the wild with the same symptoms, seqno writes stop just before the wrap and the ringbuffer at address 0. It is also timing crucial, but adding various delays hasn't helped pinpoint where the window lies. Whether the fault is restricted to the ringbuffer itself or the GTT addressing is unclear, but moving the ringbuffer fixes all the hangs I have been able to reproduce. References: (e.g.) https://bugs.freedesktop.org/show_bug.cgi?id=93262 Testcase: igt/gem_exec_whisper/render-contexts-interruptible #snb-gt1 Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Acked-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-12-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit a687a43a48f0f91ba37dce5a14b467258ed6f035) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index bd7321b..9121646 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -2091,10 +2091,12 @@ int intel_pin_and_map_ringbuffer_obj(struct drm_device *dev, { struct drm_i915_private *dev_priv = to_i915(dev); struct drm_i915_gem_object *obj = ringbuf->obj; + /* Ring wraparound at offset 0 sometimes hangs. No idea why. */ + unsigned flags = PIN_OFFSET_BIAS | 4096; int ret; if (HAS_LLC(dev_priv) && !obj->stolen) { - ret = i915_gem_obj_ggtt_pin(obj, PAGE_SIZE, 0); + ret = i915_gem_obj_ggtt_pin(obj, PAGE_SIZE, flags); if (ret) return ret; @@ -2110,7 +2112,8 @@ int intel_pin_and_map_ringbuffer_obj(struct drm_device *dev, return -ENOMEM; } } else { - ret = i915_gem_obj_ggtt_pin(obj, PAGE_SIZE, PIN_MAPPABLE); + ret = i915_gem_obj_ggtt_pin(obj, PAGE_SIZE, + flags | PIN_MAPPABLE); if (ret) return ret; -- cgit v0.10.2 From 31318a922395ec9e78d6e2ddf70779355afc7594 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 14 Apr 2016 14:39:02 +0300 Subject: drm/i915: Use fw_domains_put_with_fifo() on HSW MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HSW still has the wake FIFO, so let's check it. Cc: Mika Kuoppala Cc: Deepak S Fixes: 05a2fb157e44 ("drm/i915: Consolidate forcewake code") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1460633942-24013-1-git-send-email-ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala (cherry picked from commit 3d7d0c85e41afb5a05e98b3a8a72c38357f02594) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index 436d8f2..68b6f69 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -1189,7 +1189,11 @@ static void intel_uncore_fw_domains_init(struct drm_device *dev) } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { dev_priv->uncore.funcs.force_wake_get = fw_domains_get_with_thread_status; - dev_priv->uncore.funcs.force_wake_put = fw_domains_put; + if (IS_HASWELL(dev)) + dev_priv->uncore.funcs.force_wake_put = + fw_domains_put_with_fifo; + else + dev_priv->uncore.funcs.force_wake_put = fw_domains_put; fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER, FORCEWAKE_MT, FORCEWAKE_ACK_HSW); } else if (IS_IVYBRIDGE(dev)) { -- cgit v0.10.2 From afecb146d8d8a60a1dde9cdf570c278649617fde Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Mon, 18 Apr 2016 11:10:42 +0200 Subject: ALSA: hda/realtek - Add ALC3234 headset mode for Optiplex 9020m The Optiplex 9020m with Haswell-DT processor needs a quirk for the headset jack at the front of the machine to be able to use microphones. A quirk for this model was originally added in 3127899, but c77900e removed it in favour of a more generic version. Unfortunately, pin configurations can changed based on firmware/BIOS versions, and the generic version doesn't have any effect on newer versions of the machine/firmware anymore. With help from David Henningsson Signed-off-by: Bastien Nocera Tested-by: Bastien Nocera Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1402ba9..810bcee 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5449,6 +5449,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x064a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x064b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0665, "Dell XPS 13", ALC288_FIXUP_DELL_XPS_13), + SND_PCI_QUIRK(0x1028, 0x0669, "Dell Optiplex 9020m", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x069a, "Dell Vostro 5480", ALC290_FIXUP_SUBWOOFER_HSJACK), SND_PCI_QUIRK(0x1028, 0x06c7, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x06d9, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), -- cgit v0.10.2 From 6997e57d693b07289694239e52a10d2f02c3a46f Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 15 Apr 2016 12:06:13 +1000 Subject: powerpc: scan_features() updates incorrect bits for REAL_LE The REAL_LE feature entry in the ibm_pa_feature struct is missing an MMU feature value, meaning all the remaining elements initialise the wrong values. This means instead of checking for byte 5, bit 0, we check for byte 0, bit 0, and then we incorrectly set the CPU feature bit as well as MMU feature bit 1 and CPU user feature bits 0 and 2 (5). Checking byte 0 bit 0 (IBM numbering), means we're looking at the "Memory Management Unit (MMU)" feature - ie. does the CPU have an MMU. In practice that bit is set on all platforms which have the property. This means we set CPU_FTR_REAL_LE always. In practice that seems not to matter because all the modern cpus which have this property also implement REAL_LE, and we've never needed to disable it. We're also incorrectly setting MMU feature bit 1, which is: #define MMU_FTR_TYPE_8xx 0x00000002 Luckily the only place that looks for MMU_FTR_TYPE_8xx is in Book3E code, which can't run on the same cpus as scan_features(). So this also doesn't matter in practice. Finally in the CPU user feature mask, we're setting bits 0 and 2. Bit 2 is not currently used, and bit 0 is: #define PPC_FEATURE_PPC_LE 0x00000001 Which says the CPU supports the old style "PPC Little Endian" mode. Again this should be harmless in practice as no 64-bit CPUs implement that mode. Fix the code by adding the missing initialisation of the MMU feature. Also add a comment marking CPU user feature bit 2 (0x4) as reserved. It would be unsafe to start using it as old kernels incorrectly set it. Fixes: 44ae3ab3358e ("powerpc: Free up some CPU feature bits by moving out MMU-related features") Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org [mpe: Flesh out changelog, add comment reserving 0x4] Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/include/uapi/asm/cputable.h b/arch/powerpc/include/uapi/asm/cputable.h index 8dde199..f63c96c 100644 --- a/arch/powerpc/include/uapi/asm/cputable.h +++ b/arch/powerpc/include/uapi/asm/cputable.h @@ -31,6 +31,7 @@ #define PPC_FEATURE_PSERIES_PERFMON_COMPAT \ 0x00000040 +/* Reserved - do not use 0x00000004 */ #define PPC_FEATURE_TRUE_LE 0x00000002 #define PPC_FEATURE_PPC_LE 0x00000001 diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 7030b03..080c96b 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -158,7 +158,7 @@ static struct ibm_pa_feature { {CPU_FTR_NOEXECUTE, 0, 0, 0, 6, 0}, {CPU_FTR_NODSISRALIGN, 0, 0, 1, 1, 1}, {0, MMU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, - {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0}, + {CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 5, 0, 0}, /* * If the kernel doesn't support TM (ie. CONFIG_PPC_TRANSACTIONAL_MEM=n), * we don't want to turn on CPU_FTR_TM here, so we use CPU_FTR_TM_COMP -- cgit v0.10.2 From beff82374b259d726e2625ec6c518a5f2613f0ae Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 15 Apr 2016 12:07:24 +1000 Subject: powerpc: Update cpu_user_features2 in scan_features() scan_features() updates cpu_user_features but not cpu_user_features2. Amongst other things, cpu_user_features2 contains the user TM feature bits which we must keep in sync with the kernel TM feature bit. Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 080c96b..03fce77 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -148,23 +148,24 @@ static struct ibm_pa_feature { unsigned long cpu_features; /* CPU_FTR_xxx bit */ unsigned long mmu_features; /* MMU_FTR_xxx bit */ unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ + unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */ unsigned char pabyte; /* byte number in ibm,pa-features */ unsigned char pabit; /* bit number (big-endian) */ unsigned char invert; /* if 1, pa bit set => clear feature */ } ibm_pa_features[] __initdata = { - {0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0}, - {0, 0, PPC_FEATURE_HAS_FPU, 0, 1, 0}, - {CPU_FTR_CTRL, 0, 0, 0, 3, 0}, - {CPU_FTR_NOEXECUTE, 0, 0, 0, 6, 0}, - {CPU_FTR_NODSISRALIGN, 0, 0, 1, 1, 1}, - {0, MMU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, - {CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 5, 0, 0}, + {0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0, 0}, + {0, 0, PPC_FEATURE_HAS_FPU, 0, 0, 1, 0}, + {CPU_FTR_CTRL, 0, 0, 0, 0, 3, 0}, + {CPU_FTR_NOEXECUTE, 0, 0, 0, 0, 6, 0}, + {CPU_FTR_NODSISRALIGN, 0, 0, 0, 1, 1, 1}, + {0, MMU_FTR_CI_LARGE_PAGE, 0, 0, 1, 2, 0}, + {CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 0, 5, 0, 0}, /* * If the kernel doesn't support TM (ie. CONFIG_PPC_TRANSACTIONAL_MEM=n), * we don't want to turn on CPU_FTR_TM here, so we use CPU_FTR_TM_COMP * which is 0 if the kernel doesn't support TM. */ - {CPU_FTR_TM_COMP, 0, 0, 22, 0, 0}, + {CPU_FTR_TM_COMP, 0, 0, 0, 22, 0, 0}, }; static void __init scan_features(unsigned long node, const unsigned char *ftrs, @@ -195,10 +196,12 @@ static void __init scan_features(unsigned long node, const unsigned char *ftrs, if (bit ^ fp->invert) { cur_cpu_spec->cpu_features |= fp->cpu_features; cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; + cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2; cur_cpu_spec->mmu_features |= fp->mmu_features; } else { cur_cpu_spec->cpu_features &= ~fp->cpu_features; cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs; + cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2; cur_cpu_spec->mmu_features &= ~fp->mmu_features; } } -- cgit v0.10.2 From 4705e02498d6d5a7ab98dfee9595cd5e91db2017 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 15 Apr 2016 12:08:19 +1000 Subject: powerpc: Update TM user feature bits in scan_features() We need to update the user TM feature bits (PPC_FEATURE2_HTM and PPC_FEATURE2_HTM) to mirror what we do with the kernel TM feature bit. At the moment, if firmware reports TM is not available we turn off the kernel TM feature bit but leave the userspace ones on. Userspace thinks it can execute TM instructions and it dies trying. This (together with a QEMU patch) fixes PR KVM, which doesn't currently support TM. Signed-off-by: Anton Blanchard Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 03fce77..a15fe1d 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -161,11 +161,12 @@ static struct ibm_pa_feature { {0, MMU_FTR_CI_LARGE_PAGE, 0, 0, 1, 2, 0}, {CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 0, 5, 0, 0}, /* - * If the kernel doesn't support TM (ie. CONFIG_PPC_TRANSACTIONAL_MEM=n), - * we don't want to turn on CPU_FTR_TM here, so we use CPU_FTR_TM_COMP - * which is 0 if the kernel doesn't support TM. + * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n), + * we don't want to turn on TM here, so we use the *_COMP versions + * which are 0 if the kernel doesn't support TM. */ - {CPU_FTR_TM_COMP, 0, 0, 0, 22, 0, 0}, + {CPU_FTR_TM_COMP, 0, 0, + PPC_FEATURE2_HTM_COMP|PPC_FEATURE2_HTM_NOSC_COMP, 22, 0, 0}, }; static void __init scan_features(unsigned long node, const unsigned char *ftrs, -- cgit v0.10.2 From fe0d36e03a08a6f88e5cb9f81c3b819f797e8024 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 14 Apr 2016 13:16:35 -0400 Subject: drm/radeon: print pci revision as well as pci ids on driver load The pci revision id is useful in debugging certain things as it's part of how SKUs are defined on newer asics. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 4fd1a96..193261f 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1305,9 +1305,9 @@ int radeon_device_init(struct radeon_device *rdev, } rdev->fence_context = fence_context_alloc(RADEON_NUM_RINGS); - DRM_INFO("initializing kernel modesetting (%s 0x%04X:0x%04X 0x%04X:0x%04X).\n", - radeon_family_name[rdev->family], pdev->vendor, pdev->device, - pdev->subsystem_vendor, pdev->subsystem_device); + DRM_INFO("initializing kernel modesetting (%s 0x%04X:0x%04X 0x%04X:0x%04X 0x%02X).\n", + radeon_family_name[rdev->family], pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device, pdev->revision); /* mutex initialization are all done here so we * can recall function without having locking issues */ -- cgit v0.10.2 From bcb31eba4a4ea356fd61cbd5dec5511c3883f57e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 14 Apr 2016 14:15:16 -0400 Subject: drm/radeon: add a quirk for a XFX R9 270X bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index af4df81..e6abc09 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -2931,6 +2931,7 @@ static struct si_dpm_quirk si_dpm_quirk_list[] = { { PCI_VENDOR_ID_ATI, 0x6811, 0x1462, 0x2015, 0, 120000 }, { PCI_VENDOR_ID_ATI, 0x6811, 0x1043, 0x2015, 0, 120000 }, { PCI_VENDOR_ID_ATI, 0x6811, 0x148c, 0x2015, 0, 120000 }, + { PCI_VENDOR_ID_ATI, 0x6810, 0x1682, 0x9275, 0, 120000 }, { 0, 0, 0, 0 }, }; -- cgit v0.10.2 From 8f99455587855a5f79af08e40327ca40ab5f1999 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 13 Apr 2016 23:37:42 -0400 Subject: drm/amdgpu/acp: fix resume on CZ systems with AZ audio Nothing to do on resume on systems with AZ audio. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c index d6b0bff..b7b583c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c @@ -425,6 +425,10 @@ static int acp_resume(void *handle) struct acp_pm_domain *apd; struct amdgpu_device *adev = (struct amdgpu_device *)handle; + /* return early if no ACP */ + if (!adev->acp.acp_genpd) + return 0; + /* SMU block will power on ACP irrespective of ACP runtime status. * Power off explicitly based on genpd ACP runtime status so that ACP * hw and ACP-genpd status are in sync. -- cgit v0.10.2 From bfaddd9fc8ac048b99475f000dbef6f08297417f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 18 Apr 2016 11:19:19 -0400 Subject: Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control" This reverts commit e64c952efb8e0c15ae82cec8e455ab4910690ef1. ATPX is the ACPI method for controlling AMD PowerXpress laptops. There are flags to indicate which methods are supported. If the dGPU power down flag is not supported, the driver needs to implement the dGPU power down manually. We had previously always forced the driver to assume the ATPX dGPU power down was present, but this causes problems on boards where it is not, leading to GPU hangs when attempting to power down the dGPU. Manual dGPU power down is not currently supported in the Linux driver. Some laptops indicate that the ATPX dGPU power down method is not present, but it actually apparently is. I'm not sure if this is a bios bug and it should be set or if there is a reason it was unset and the method should not be used. This is not an issue on other OSes since both the ATPX and the manual driver power down methods are supported. This is apparently fairly widespread, so just revert for now. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=115321 https://bugzilla.kernel.org/show_bug.cgi?id=116581 https://bugzilla.kernel.org/show_bug.cgi?id=116251 Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index fd8c4d3..56482e3 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -62,10 +62,6 @@ bool radeon_has_atpx(void) { return radeon_atpx_priv.atpx_detected; } -bool radeon_has_atpx_dgpu_power_cntl(void) { - return radeon_atpx_priv.atpx.functions.power_cntl; -} - /** * radeon_atpx_call - call an ATPX method * @@ -145,6 +141,10 @@ static void radeon_atpx_parse_functions(struct radeon_atpx_functions *f, u32 mas */ static int radeon_atpx_validate(struct radeon_atpx *atpx) { + /* make sure required functions are enabled */ + /* dGPU power control is required */ + atpx->functions.power_cntl = true; + if (atpx->functions.px_params) { union acpi_object *info; struct atpx_px_params output; diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 193261f..d0826fb 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -103,12 +103,6 @@ static const char radeon_family_name[][16] = { "LAST", }; -#if defined(CONFIG_VGA_SWITCHEROO) -bool radeon_has_atpx_dgpu_power_cntl(void); -#else -static inline bool radeon_has_atpx_dgpu_power_cntl(void) { return false; } -#endif - #define RADEON_PX_QUIRK_DISABLE_PX (1 << 0) #define RADEON_PX_QUIRK_LONG_WAKEUP (1 << 1) @@ -1439,7 +1433,7 @@ int radeon_device_init(struct radeon_device *rdev, * ignore it */ vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode); - if ((rdev->flags & RADEON_IS_PX) && radeon_has_atpx_dgpu_power_cntl()) + if (rdev->flags & RADEON_IS_PX) runtime = true; vga_switcheroo_register_client(rdev->pdev, &radeon_switcheroo_ops, runtime); if (runtime) -- cgit v0.10.2 From adb4907007445ab9d392f4ce398cd7fa5d26612b Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 15 Apr 2016 12:11:21 +0200 Subject: arm64: fix invalidation of wrong __early_cpu_boot_status cacheline In head.S, the str_l macro, which takes a source register, a symbol name and a temp register, is used to store a status value to the variable __early_cpu_boot_status. Subsequently, the value of the temp register is reused to invalidate any cachelines covering this variable. However, since str_l resolves to adrp \tmp, \sym str \src, [\tmp, :lo12:\sym] the temp register never actually holds the address of the variable but only of the 4 KB window that covers it, and reusing it leads to the wrong cacheline being invalidated. So instead, take the address explicitly before doing the store, and reuse that value to perform the cache invalidation. Fixes: bb9052744f4b ("arm64: Handle early CPU boot failures") Signed-off-by: Ard Biesheuvel Acked-by: Mark Rutland Acked-by: Suzuki K Poulose Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 4203d5f..80a709a 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -734,7 +734,8 @@ ENDPROC(__secondary_switched) .macro update_early_cpu_boot_status status, tmp1, tmp2 mov \tmp2, #\status - str_l \tmp2, __early_cpu_boot_status, \tmp1 + adr_l \tmp1, __early_cpu_boot_status + str \tmp2, [\tmp1] dmb sy dc ivac, \tmp1 // Invalidate potentially stale cache line .endm -- cgit v0.10.2 From dfc4f59d901bf72f93280b7c142c8ad846359c6f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 18 Apr 2016 11:26:26 -0400 Subject: drm/radeon: print a message if ATPX dGPU power control is missing It will help identify problematic boards. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 56482e3..95f4fea 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -143,7 +143,10 @@ static int radeon_atpx_validate(struct radeon_atpx *atpx) { /* make sure required functions are enabled */ /* dGPU power control is required */ - atpx->functions.power_cntl = true; + if (atpx->functions.power_cntl == false) { + printk("ATPX dGPU power cntl not present, forcing\n"); + atpx->functions.power_cntl = true; + } if (atpx->functions.px_params) { union acpi_object *info; -- cgit v0.10.2 From 67245ff332064c01b760afa7a384ccda024bfd24 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2016 15:16:07 -0700 Subject: devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman Cc: Peter Anvin Cc: Andy Lutomirski Cc: Al Viro Cc: Peter Hurley Cc: Serge Hallyn Cc: Willy Tarreau Cc: Aurelien Jarno Cc: Alan Cox Cc: Jann Horn Cc: Greg KH Cc: Jiri Slaby Cc: Florian Weimer Signed-off-by: Linus Torvalds diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index e16a49b..0058d9fb 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -663,14 +663,14 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) /* this is called once with whichever end is closed last */ static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) { - struct inode *ptmx_inode; + struct pts_fs_info *fsi; if (tty->driver->subtype == PTY_TYPE_MASTER) - ptmx_inode = tty->driver_data; + fsi = tty->driver_data; else - ptmx_inode = tty->link->driver_data; - devpts_kill_index(ptmx_inode, tty->index); - devpts_del_ref(ptmx_inode); + fsi = tty->link->driver_data; + devpts_kill_index(fsi, tty->index); + devpts_put_ref(fsi); } static const struct tty_operations ptm_unix98_ops = { @@ -720,6 +720,7 @@ static const struct tty_operations pty_unix98_ops = { static int ptmx_open(struct inode *inode, struct file *filp) { + struct pts_fs_info *fsi; struct tty_struct *tty; struct inode *slave_inode; int retval; @@ -734,47 +735,41 @@ static int ptmx_open(struct inode *inode, struct file *filp) if (retval) return retval; + fsi = devpts_get_ref(inode, filp); + retval = -ENODEV; + if (!fsi) + goto out_free_file; + /* find a device that is not in use. */ mutex_lock(&devpts_mutex); - index = devpts_new_index(inode); - if (index < 0) { - retval = index; - mutex_unlock(&devpts_mutex); - goto err_file; - } - + index = devpts_new_index(fsi); mutex_unlock(&devpts_mutex); - mutex_lock(&tty_mutex); - tty = tty_init_dev(ptm_driver, index); + retval = index; + if (index < 0) + goto out_put_ref; - if (IS_ERR(tty)) { - retval = PTR_ERR(tty); - goto out; - } + mutex_lock(&tty_mutex); + tty = tty_init_dev(ptm_driver, index); /* The tty returned here is locked so we can safely drop the mutex */ mutex_unlock(&tty_mutex); - set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */ - tty->driver_data = inode; + retval = PTR_ERR(tty); + if (IS_ERR(tty)) + goto out; /* - * In the case where all references to ptmx inode are dropped and we - * still have /dev/tty opened pointing to the master/slave pair (ptmx - * is closed/released before /dev/tty), we must make sure that the inode - * is still valid when we call the final pty_unix98_shutdown, thus we - * hold an additional reference to the ptmx inode. For the same /dev/tty - * last close case, we also need to make sure the super_block isn't - * destroyed (devpts instance unmounted), before /dev/tty is closed and - * on its release devpts_kill_index is called. + * From here on out, the tty is "live", and the index and + * fsi will be killed/put by the tty_release() */ - devpts_add_ref(inode); + set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */ + tty->driver_data = fsi; tty_add_file(tty, filp); - slave_inode = devpts_pty_new(inode, + slave_inode = devpts_pty_new(fsi, MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index, tty->link); if (IS_ERR(slave_inode)) { @@ -793,12 +788,14 @@ static int ptmx_open(struct inode *inode, struct file *filp) return 0; err_release: tty_unlock(tty); + // This will also put-ref the fsi tty_release(inode, filp); return retval; out: - mutex_unlock(&tty_mutex); - devpts_kill_index(inode, index); -err_file: + devpts_kill_index(fsi, index); +out_put_ref: + devpts_put_ref(fsi); +out_free_file: tty_free_file(filp); return retval; } diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index 655f21f..0af8e7d 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -128,6 +128,7 @@ static const match_table_t tokens = { struct pts_fs_info { struct ida allocated_ptys; struct pts_mount_opts mount_opts; + struct super_block *sb; struct dentry *ptmx_dentry; }; @@ -358,7 +359,7 @@ static const struct super_operations devpts_sops = { .show_options = devpts_show_options, }; -static void *new_pts_fs_info(void) +static void *new_pts_fs_info(struct super_block *sb) { struct pts_fs_info *fsi; @@ -369,6 +370,7 @@ static void *new_pts_fs_info(void) ida_init(&fsi->allocated_ptys); fsi->mount_opts.mode = DEVPTS_DEFAULT_MODE; fsi->mount_opts.ptmxmode = DEVPTS_DEFAULT_PTMX_MODE; + fsi->sb = sb; return fsi; } @@ -384,7 +386,7 @@ devpts_fill_super(struct super_block *s, void *data, int silent) s->s_op = &devpts_sops; s->s_time_gran = 1; - s->s_fs_info = new_pts_fs_info(); + s->s_fs_info = new_pts_fs_info(s); if (!s->s_fs_info) goto fail; @@ -524,17 +526,14 @@ static struct file_system_type devpts_fs_type = { * to the System V naming convention */ -int devpts_new_index(struct inode *ptmx_inode) +int devpts_new_index(struct pts_fs_info *fsi) { - struct super_block *sb = pts_sb_from_inode(ptmx_inode); - struct pts_fs_info *fsi; int index; int ida_ret; - if (!sb) + if (!fsi) return -ENODEV; - fsi = DEVPTS_SB(sb); retry: if (!ida_pre_get(&fsi->allocated_ptys, GFP_KERNEL)) return -ENOMEM; @@ -564,11 +563,8 @@ retry: return index; } -void devpts_kill_index(struct inode *ptmx_inode, int idx) +void devpts_kill_index(struct pts_fs_info *fsi, int idx) { - struct super_block *sb = pts_sb_from_inode(ptmx_inode); - struct pts_fs_info *fsi = DEVPTS_SB(sb); - mutex_lock(&allocated_ptys_lock); ida_remove(&fsi->allocated_ptys, idx); pty_count--; @@ -578,21 +574,25 @@ void devpts_kill_index(struct inode *ptmx_inode, int idx) /* * pty code needs to hold extra references in case of last /dev/tty close */ - -void devpts_add_ref(struct inode *ptmx_inode) +struct pts_fs_info *devpts_get_ref(struct inode *ptmx_inode, struct file *file) { - struct super_block *sb = pts_sb_from_inode(ptmx_inode); + struct super_block *sb; + struct pts_fs_info *fsi; + + sb = pts_sb_from_inode(ptmx_inode); + if (!sb) + return NULL; + fsi = DEVPTS_SB(sb); + if (!fsi) + return NULL; atomic_inc(&sb->s_active); - ihold(ptmx_inode); + return fsi; } -void devpts_del_ref(struct inode *ptmx_inode) +void devpts_put_ref(struct pts_fs_info *fsi) { - struct super_block *sb = pts_sb_from_inode(ptmx_inode); - - iput(ptmx_inode); - deactivate_super(sb); + deactivate_super(fsi->sb); } /** @@ -604,22 +604,21 @@ void devpts_del_ref(struct inode *ptmx_inode) * * The created inode is returned. Remove it from /dev/pts/ by devpts_pty_kill. */ -struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index, +struct inode *devpts_pty_new(struct pts_fs_info *fsi, dev_t device, int index, void *priv) { struct dentry *dentry; - struct super_block *sb = pts_sb_from_inode(ptmx_inode); + struct super_block *sb; struct inode *inode; struct dentry *root; - struct pts_fs_info *fsi; struct pts_mount_opts *opts; char s[12]; - if (!sb) + if (!fsi) return ERR_PTR(-ENODEV); + sb = fsi->sb; root = sb->s_root; - fsi = DEVPTS_SB(sb); opts = &fsi->mount_opts; inode = new_inode(sb); diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h index e0ee0b3..358a4db 100644 --- a/include/linux/devpts_fs.h +++ b/include/linux/devpts_fs.h @@ -15,38 +15,24 @@ #include +struct pts_fs_info; + #ifdef CONFIG_UNIX98_PTYS -int devpts_new_index(struct inode *ptmx_inode); -void devpts_kill_index(struct inode *ptmx_inode, int idx); -void devpts_add_ref(struct inode *ptmx_inode); -void devpts_del_ref(struct inode *ptmx_inode); +/* Look up a pts fs info and get a ref to it */ +struct pts_fs_info *devpts_get_ref(struct inode *, struct file *); +void devpts_put_ref(struct pts_fs_info *); + +int devpts_new_index(struct pts_fs_info *); +void devpts_kill_index(struct pts_fs_info *, int); + /* mknod in devpts */ -struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index, - void *priv); +struct inode *devpts_pty_new(struct pts_fs_info *, dev_t, int, void *); /* get private structure */ void *devpts_get_priv(struct inode *pts_inode); /* unlink */ void devpts_pty_kill(struct inode *inode); -#else - -/* Dummy stubs in the no-pty case */ -static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; } -static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { } -static inline void devpts_add_ref(struct inode *ptmx_inode) { } -static inline void devpts_del_ref(struct inode *ptmx_inode) { } -static inline struct inode *devpts_pty_new(struct inode *ptmx_inode, - dev_t device, int index, void *priv) -{ - return ERR_PTR(-EINVAL); -} -static inline void *devpts_get_priv(struct inode *pts_inode) -{ - return NULL; -} -static inline void devpts_pty_kill(struct inode *inode) { } - #endif -- cgit v0.10.2 From c9d9c929e6741118776eb0f385339d3c2b84d5f8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 10 Apr 2016 05:59:33 +0200 Subject: cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set Since governor operations are generally skipped if cpufreq_suspended is set, cpufreq_start_governor() should do nothing in that case. That function is called in the cpufreq_online() path, and may also be called from cpufreq_offline() in some cases, which are invoked by the nonboot CPUs disabing/enabling code during system suspend to RAM and resume. That happens when all devices have been suspended, so if the cpufreq driver relies on things like I2C to get the current frequency, it may not be ready to do that then. To prevent problems from happening for this reason, make cpufreq_update_current_freq(), which is the only function invoked by cpufreq_start_governor() that doesn't check cpufreq_suspended already, return 0 upfront if cpufreq_suspended is set. Fixes: 3bbf8fe3ae08 (cpufreq: Always update current frequency before startig governor) Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b87596b..e93405f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1491,6 +1491,9 @@ static unsigned int cpufreq_update_current_freq(struct cpufreq_policy *policy) { unsigned int new_freq; + if (cpufreq_suspended) + return 0; + new_freq = cpufreq_driver->get(policy->cpu); if (!new_freq) return 0; -- cgit v0.10.2 From 9220ebffda4aa23fe683c9ca6c94fb72d7c131c2 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 11 Apr 2016 20:23:31 +0530 Subject: Revert "serial-uartlite: Constify uartlite_be/uartlite_le" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 2905697a82eaf20606ced164d853b52d1b94aaa8. The commit introduced two build warnings: drivers/tty/serial/uartlite.c: In function ‘ulite_request_port’: drivers/tty/serial/uartlite.c:348:21: warning: assignment discards ‘const’ qualifier from pointer target type port->private_data = &uartlite_be; ^ drivers/tty/serial/uartlite.c:354:22: warning: assignment discards ‘const’ qualifier from pointer target type port->private_data = &uartlite_le; ^ Signed-off-by: Sudip Mukherjee Cc: Maarten Brock Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index c9fdfc8..d08baa6 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -72,7 +72,7 @@ static void uartlite_outbe32(u32 val, void __iomem *addr) iowrite32be(val, addr); } -static const struct uartlite_reg_ops uartlite_be = { +static struct uartlite_reg_ops uartlite_be = { .in = uartlite_inbe32, .out = uartlite_outbe32, }; @@ -87,21 +87,21 @@ static void uartlite_outle32(u32 val, void __iomem *addr) iowrite32(val, addr); } -static const struct uartlite_reg_ops uartlite_le = { +static struct uartlite_reg_ops uartlite_le = { .in = uartlite_inle32, .out = uartlite_outle32, }; static inline u32 uart_in32(u32 offset, struct uart_port *port) { - const struct uartlite_reg_ops *reg_ops = port->private_data; + struct uartlite_reg_ops *reg_ops = port->private_data; return reg_ops->in(port->membase + offset); } static inline void uart_out32(u32 val, u32 offset, struct uart_port *port) { - const struct uartlite_reg_ops *reg_ops = port->private_data; + struct uartlite_reg_ops *reg_ops = port->private_data; reg_ops->out(val, port->membase + offset); } -- cgit v0.10.2 From 0c66940d584d1aac92f6a78460dc0ba2efd3b7ba Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Thu, 24 Mar 2016 09:03:45 +0100 Subject: tty/serial/8250: fix RS485 half-duplex RX When in half-duplex mode RX will be disabled before TX, but not enabled after deactivating transmitter. This patch enables UART_IER_RLSI and UART_IER_RDI interrupts after TX is over. Cc: Matwey V. Kornilov Signed-off-by: Yegor Yefremov Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Acked-by: Matwey V. Kornilov Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index e213da0..00ad263 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1403,9 +1403,18 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p) /* * Empty the RX FIFO, we are not interested in anything * received during the half-duplex transmission. + * Enable previously disabled RX interrupts. */ - if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) + if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) { serial8250_clear_fifos(p); + + serial8250_rpm_get(p); + + p->ier |= UART_IER_RLSI | UART_IER_RDI; + serial_port_out(&p->port, UART_IER, p->ier); + + serial8250_rpm_put(p); + } } static void serial8250_em485_handle_stop_tx(unsigned long arg) -- cgit v0.10.2 From f077b73682910bc7dc9439e50e7b1ad97f28f3f1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 19 Apr 2016 15:17:37 +0900 Subject: Revert "serial: 8250: Add hardware dependency to RT288X option" This reverts commit 8d2acdb9fc3a544ab0442634531834d6007b5467. It's causing problems, and somehow I missed that Peter didn't like it at all :( So revert it for now until it gets sorted out. Reported-by: Mason Cc: Peter Hurley Cc: Jean Delvare Cc: Mans Rullgard Cc: Jiri Slaby Cc: John Crispin Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 64742a0..4d7cb9c 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -324,7 +324,6 @@ config SERIAL_8250_EM config SERIAL_8250_RT288X bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" depends on SERIAL_8250 - depends on MIPS || COMPILE_TEST default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620 help Selecting this option will add support for the alternate register -- cgit v0.10.2 From 6687659568e2ec5b3ac24b39c5d26ce8b9d90434 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Sun, 17 Apr 2016 23:31:41 -0700 Subject: locking/pvqspinlock: Fix division by zero in qstat_read() While playing with the qstat statistics (in /qlockstat/) I ran into the following splat on a VM when opening pv_hash_hops: divide error: 0000 [#1] SMP ... RIP: 0010:[] [] qstat_read+0x12e/0x1e0 ... Call Trace: [] ? mem_cgroup_commit_charge+0x6c/0xd0 [] ? page_add_new_anon_rmap+0x8c/0xd0 [] ? handle_mm_fault+0x1439/0x1b40 [] ? do_mmap+0x449/0x550 [] ? __vfs_read+0x23/0xd0 [] ? rw_verify_area+0x52/0xd0 [] ? vfs_read+0x81/0x120 [] ? SyS_read+0x42/0xa0 [] ? entry_SYSCALL_64_fastpath+0x1e/0xa8 Fix this by verifying that qstat_pv_kick_unlock is in fact non-zero, similarly to what the qstat_pv_latency_wake case does, as if nothing else, this can come from resetting the statistics, thus having 0 kicks should be quite valid in this context. Signed-off-by: Davidlohr Bueso Reviewed-by: Waiman Long Cc: Andrew Morton Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: dave@stgolabs.net Cc: waiman.long@hpe.com Link: http://lkml.kernel.org/r/1460961103-24953-1-git-send-email-dave@stgolabs.net Signed-off-by: Ingo Molnar diff --git a/kernel/locking/qspinlock_stat.h b/kernel/locking/qspinlock_stat.h index eb2a2c9..d734b75 100644 --- a/kernel/locking/qspinlock_stat.h +++ b/kernel/locking/qspinlock_stat.h @@ -136,10 +136,12 @@ static ssize_t qstat_read(struct file *file, char __user *user_buf, } if (counter == qstat_pv_hash_hops) { - u64 frac; + u64 frac = 0; - frac = 100ULL * do_div(stat, kicks); - frac = DIV_ROUND_CLOSEST_ULL(frac, kicks); + if (kicks) { + frac = 100ULL * do_div(stat, kicks); + frac = DIV_ROUND_CLOSEST_ULL(frac, kicks); + } /* * Return a X.XX decimal number -- cgit v0.10.2 From 3d51ae172d759198b2e47e104c31a92d20d17927 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Apr 2016 08:01:05 -0700 Subject: Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" This reverts commit 571afb4c8a4bbe88541364e7f6827340562f2736. diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index bfabc06..52de382 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -65,7 +65,6 @@ static struct omap_id omap_ids[] __initdata = { unsigned int omap_rev(void) { - WARN_ON_ONCE(!omap_revision || omap_revision == -1); return omap_revision; } EXPORT_SYMBOL(omap_rev); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 75fb6c0..d85c249 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -46,7 +46,6 @@ u32 omap_features; unsigned int omap_rev(void) { - WARN_ON_ONCE(!omap_revision || omap_revision == -1); return omap_revision; } EXPORT_SYMBOL(omap_rev); -- cgit v0.10.2 From 52dee2c9f0850704327d976ea5c5fa7f4696dab5 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Mon, 18 Apr 2016 14:46:30 -0700 Subject: Input: twl6040-vibra - fix NULL pointer dereference by removing workqueue commit 21fb9f0d5e91 ("Input: twl6040-vibra - use system workqueue") says that it switches to use the system workqueue but it did neither - remove the workqueue struct variable - replace code to really use the system workqueue Instead it calls queue_work() on uninitialized info->workqueue. The result is a NULL pointer dereference in vibra_play(). Solution: use schedule_work Signed-off-by: H. Nikolaus Schaller Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index ea63fad..3a196ad 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -45,7 +45,6 @@ struct vibra_info { struct device *dev; struct input_dev *input_dev; - struct workqueue_struct *workqueue; struct work_struct play_work; struct mutex mutex; int irq; @@ -213,7 +212,7 @@ static int vibra_play(struct input_dev *input, void *data, info->strong_speed = effect->u.rumble.strong_magnitude; info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1; - ret = queue_work(info->workqueue, &info->play_work); + ret = schedule_work(&info->play_work); if (!ret) { dev_info(&input->dev, "work is already on queue\n"); return ret; -- cgit v0.10.2 From 5f7fb6f1e514e0ed47aee97752d6ae10491b4841 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Mon, 18 Apr 2016 14:47:14 -0700 Subject: Input: twl6040-vibra - ignore return value of schedule_work Returning ret is wrong. And checking for an error as well. User space may call multiple times until the work is really scheduled. twl4030-vibra.c also ignores the return value. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index 3a196ad..0c853c2 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -212,11 +212,7 @@ static int vibra_play(struct input_dev *input, void *data, info->strong_speed = effect->u.rumble.strong_magnitude; info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1; - ret = schedule_work(&info->play_work); - if (!ret) { - dev_info(&input->dev, "work is already on queue\n"); - return ret; - } + schedule_work(&info->play_work); return 0; } -- cgit v0.10.2 From 03f1217e5fafac8eb9e28aa8d04a67b6db1e435b Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Tue, 19 Apr 2016 12:35:20 +0100 Subject: ARM: 8563/1: fix demoting HWCAP_SWP Commit b8c9592 "ARM: 8318/1: treat CPU feature register fields as signed quantities" accidentally altered cpuid register used to demote HWCAP_SWP. ARM ARM says that SyncPrim_instrs bits in ID_ISAR3 should be used with SynchPrim_instrs_frac from ID_ISAR4. So, follow this rule. Signed-off-by: Vladimir Murzin Acked-by: Ard Biesheuvel Signed-off-by: Russell King diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index a28fce0..2c4bea3 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -512,7 +512,7 @@ static void __init elf_hwcap_fixup(void) */ if (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) > 1 || (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) == 1 && - cpuid_feature_extract(CPUID_EXT_ISAR3, 20) >= 3)) + cpuid_feature_extract(CPUID_EXT_ISAR4, 20) >= 3)) elf_hwcap &= ~HWCAP_SWP; } -- cgit v0.10.2 From ac36a881b72a1e9831f1c59abf935868c90685cf Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Tue, 19 Apr 2016 12:35:55 +0100 Subject: ARM: 8564/1: fix cpu feature extracting helper Commit b8c9592 "ARM: 8318/1: treat CPU feature register fields as signed quantities" introduced helper to extract signed quantities of 4-bit blocks. However, with a current code feature with value 0b1000 isn't rejected as negative. So fix the "if" condition. Reported-by: Jonathan Brawn Signed-off-by: Vladimir Murzin Acked-by: Ard Biesheuvel Signed-off-by: Russell King diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index b23c6c8..1ee94c7 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -276,7 +276,7 @@ static inline int __attribute_const__ cpuid_feature_extract_field(u32 features, int feature = (features >> field) & 15; /* feature registers are signed values */ - if (feature > 8) + if (feature > 7) feature -= 16; return feature; -- cgit v0.10.2 From de3df8a986b635082a1d94bae2c361d043c57106 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 19 Apr 2016 22:07:50 +0200 Subject: ALSA: hda - Keep powering up ADCs on Cirrus codecs Although one weird behavior about the input path (inconsistent D0/D3 switch) on Cirrus CS420x codecs was fixed in the previous commit, there is still an issue on some Mac machines: the capture stream stalls when switching the ADCs on the fly. More badly, this keeps stuck until the next reboot. The dynamic ADC switching is already a bit fragile and assuming optimistically that the chip accepts the frequent power changes. On Cirrus codecs, this doesn't seem applicable. As a quick workaround, we pin down the ADCs to keep up in D0 when spec->dyn_adc_switch is set. In this way, the ADCs are kept up only for the system that were confirmed to be broken. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171 Cc: # v4.4+ Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index a47e8ae..80bbadc 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -361,6 +361,7 @@ static int cs_parse_auto_config(struct hda_codec *codec) { struct cs_spec *spec = codec->spec; int err; + int i; err = snd_hda_parse_pin_defcfg(codec, &spec->gen.autocfg, NULL, 0); if (err < 0) @@ -370,6 +371,19 @@ static int cs_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; + /* keep the ADCs powered up when it's dynamically switchable */ + if (spec->gen.dyn_adc_switch) { + unsigned int done = 0; + for (i = 0; i < spec->gen.input_mux.num_items; i++) { + int idx = spec->gen.dyn_adc_idx[i]; + if (done & (1 << idx)) + continue; + snd_hda_gen_fix_pin_power(codec, + spec->gen.adc_nids[idx]); + done |= 1 << idx; + } + } + return 0; } -- cgit v0.10.2 From 5d07163334ba016c053b033cd0bb3c92d7dc0229 Mon Sep 17 00:00:00 2001 From: Aubrey Li Date: Thu, 31 Mar 2016 14:28:09 -0500 Subject: platform:x86 decouple telemetry driver from the optional IPC resources Currently the optional IPC resources prevent telemetry driver from probing if these resources are not in ACPI table. This patch decouples telemetry driver from these optional resources, so that telemetry driver has dependency only on the necessary ACPI resources. Signed-off-by: Aubrey Li Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c index 3fb1d85..6f497e8 100644 --- a/drivers/platform/x86/intel_pmc_ipc.c +++ b/drivers/platform/x86/intel_pmc_ipc.c @@ -687,8 +687,8 @@ static int ipc_plat_get_res(struct platform_device *pdev) ipcdev.acpi_io_size = size; dev_info(&pdev->dev, "io res: %pR\n", res); - /* This is index 0 to cover BIOS data register */ punit_res = punit_res_array; + /* This is index 0 to cover BIOS data register */ res = platform_get_resource(pdev, IORESOURCE_MEM, PLAT_RESOURCE_BIOS_DATA_INDEX); if (!res) { @@ -698,55 +698,51 @@ static int ipc_plat_get_res(struct platform_device *pdev) *punit_res = *res; dev_info(&pdev->dev, "punit BIOS data res: %pR\n", res); + /* This is index 1 to cover BIOS interface register */ res = platform_get_resource(pdev, IORESOURCE_MEM, PLAT_RESOURCE_BIOS_IFACE_INDEX); if (!res) { dev_err(&pdev->dev, "Failed to get res of punit BIOS iface\n"); return -ENXIO; } - /* This is index 1 to cover BIOS interface register */ *++punit_res = *res; dev_info(&pdev->dev, "punit BIOS interface res: %pR\n", res); + /* This is index 2 to cover ISP data register, optional */ res = platform_get_resource(pdev, IORESOURCE_MEM, PLAT_RESOURCE_ISP_DATA_INDEX); - if (!res) { - dev_err(&pdev->dev, "Failed to get res of punit ISP data\n"); - return -ENXIO; + ++punit_res; + if (res) { + *punit_res = *res; + dev_info(&pdev->dev, "punit ISP data res: %pR\n", res); } - /* This is index 2 to cover ISP data register */ - *++punit_res = *res; - dev_info(&pdev->dev, "punit ISP data res: %pR\n", res); + /* This is index 3 to cover ISP interface register, optional */ res = platform_get_resource(pdev, IORESOURCE_MEM, PLAT_RESOURCE_ISP_IFACE_INDEX); - if (!res) { - dev_err(&pdev->dev, "Failed to get res of punit ISP iface\n"); - return -ENXIO; + ++punit_res; + if (res) { + *punit_res = *res; + dev_info(&pdev->dev, "punit ISP interface res: %pR\n", res); } - /* This is index 3 to cover ISP interface register */ - *++punit_res = *res; - dev_info(&pdev->dev, "punit ISP interface res: %pR\n", res); + /* This is index 4 to cover GTD data register, optional */ res = platform_get_resource(pdev, IORESOURCE_MEM, PLAT_RESOURCE_GTD_DATA_INDEX); - if (!res) { - dev_err(&pdev->dev, "Failed to get res of punit GTD data\n"); - return -ENXIO; + ++punit_res; + if (res) { + *punit_res = *res; + dev_info(&pdev->dev, "punit GTD data res: %pR\n", res); } - /* This is index 4 to cover GTD data register */ - *++punit_res = *res; - dev_info(&pdev->dev, "punit GTD data res: %pR\n", res); + /* This is index 5 to cover GTD interface register, optional */ res = platform_get_resource(pdev, IORESOURCE_MEM, PLAT_RESOURCE_GTD_IFACE_INDEX); - if (!res) { - dev_err(&pdev->dev, "Failed to get res of punit GTD iface\n"); - return -ENXIO; + ++punit_res; + if (res) { + *punit_res = *res; + dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res); } - /* This is index 5 to cover GTD interface register */ - *++punit_res = *res; - dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res); res = platform_get_resource(pdev, IORESOURCE_MEM, PLAT_RESOURCE_IPC_INDEX); diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c index bd87540..a47a41f 100644 --- a/drivers/platform/x86/intel_punit_ipc.c +++ b/drivers/platform/x86/intel_punit_ipc.c @@ -227,6 +227,11 @@ static int intel_punit_get_bars(struct platform_device *pdev) struct resource *res; void __iomem *addr; + /* + * The following resources are required + * - BIOS_IPC BASE_DATA + * - BIOS_IPC BASE_IFACE + */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); addr = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(addr)) @@ -239,29 +244,40 @@ static int intel_punit_get_bars(struct platform_device *pdev) return PTR_ERR(addr); punit_ipcdev->base[BIOS_IPC][BASE_IFACE] = addr; + /* + * The following resources are optional + * - ISPDRIVER_IPC BASE_DATA + * - ISPDRIVER_IPC BASE_IFACE + * - GTDRIVER_IPC BASE_DATA + * - GTDRIVER_IPC BASE_IFACE + */ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - addr = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(addr)) - return PTR_ERR(addr); - punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr; + if (res) { + addr = devm_ioremap_resource(&pdev->dev, res); + if (!IS_ERR(addr)) + punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr; + } res = platform_get_resource(pdev, IORESOURCE_MEM, 3); - addr = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(addr)) - return PTR_ERR(addr); - punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr; + if (res) { + addr = devm_ioremap_resource(&pdev->dev, res); + if (!IS_ERR(addr)) + punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr; + } res = platform_get_resource(pdev, IORESOURCE_MEM, 4); - addr = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(addr)) - return PTR_ERR(addr); - punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr; + if (res) { + addr = devm_ioremap_resource(&pdev->dev, res); + if (!IS_ERR(addr)) + punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr; + } res = platform_get_resource(pdev, IORESOURCE_MEM, 5); - addr = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(addr)) - return PTR_ERR(addr); - punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr; + if (res) { + addr = devm_ioremap_resource(&pdev->dev, res); + if (!IS_ERR(addr)) + punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr; + } return 0; } -- cgit v0.10.2 From ac6908b3049397b10bcfd8143d79cbdbbd266f02 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Wed, 6 Apr 2016 14:52:53 +0200 Subject: ARM: dts: r8a7791: Don't disable referenced optional clocks clk_get on a disabled clock node will return EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their clocks property. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them to prevent this. Signed-off-by: Sjoerd Simons Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0ad71b8..cc6e28f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -661,6 +661,7 @@ }; &pcie_bus_clk { + clock-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6c08314..76c5b2e 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -414,6 +414,7 @@ }; &pcie_bus_clk { + clock-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6439f05..1cd1b6a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1083,9 +1083,8 @@ pcie_bus_clk: pcie_bus_clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <100000000>; + clock-frequency = <0>; clock-output-names = "pcie_bus"; - status = "disabled"; }; /* External SCIF clock */ @@ -1094,7 +1093,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* External USB clock - can be overridden by the board */ @@ -1112,7 +1110,6 @@ /* This value must be overridden by the board. */ clock-frequency = <0>; clock-output-names = "can_clk"; - status = "disabled"; }; /* Special CPG clocks */ -- cgit v0.10.2 From 01638a7f5ef967e94e8aff455874d62e12fe32ed Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Wed, 6 Apr 2016 21:32:06 +0200 Subject: Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" This reverts commit 19417bd9c511 ("ARM: dts: porter: Enable SCIF_CLK frequency and pins") as according to http://elinux.org/File:R-CarM2-KOELSCH_PORTER-B_PORTER_C_Comparison.pdf the external oscillator for SCIF_CLK is not mounted on the porter boards. Signed-off-by: Sjoerd Simons Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 76c5b2e..a9285d9 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -143,19 +143,11 @@ }; &pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; - scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; - }; - ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -229,11 +221,6 @@ status = "okay"; }; -&scif_clk { - clock-frequency = <14745600>; - status = "okay"; -}; - ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; -- cgit v0.10.2 From c531fb27e9699eaee478ee5686a3cca5dee73602 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 11 Jan 2016 19:41:12 +0100 Subject: ARM: shmobile: timer: Fix preset_lpj leading to too short delays On all shmobile ARM SoCs, loop-based delays may complete early, which can be after only 1/3 (Cortex A9) or 1/2 (Cortex A7 or A15) of the minimum required time. This is caused by calculating preset_lpj based on incorrect assumptions about the number of clock cycles per loop: - All of Cortex A7, A9, and A15 run __loop_delay() at 1 loop per CPU clock cycle, - As of commit 11d4bb1bd067f9d0 ("ARM: 7907/1: lib: delay-loop: Add align directive to fix BogoMIPS calculation"), Cortex A8 runs __loop_delay() at 1 loop per 2 instead of 3 CPU clock cycles. On SoCs with Cortex A7 and/or A15 CPU cores, this went unnoticed, as delays use the ARM arch timer if available. R-Car Gen2 doesn't work if the arch timer is disabled. However, APE6 can be used without the arch timer. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index ad008e4..67d79f9 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -40,8 +40,7 @@ static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, void __init shmobile_init_delay(void) { struct device_node *np, *cpus; - bool is_a7_a8_a9 = false; - bool is_a15 = false; + unsigned int div = 0; bool has_arch_timer = false; u32 max_freq = 0; @@ -55,27 +54,22 @@ void __init shmobile_init_delay(void) if (!of_property_read_u32(np, "clock-frequency", &freq)) max_freq = max(max_freq, freq); - if (of_device_is_compatible(np, "arm,cortex-a8") || - of_device_is_compatible(np, "arm,cortex-a9")) { - is_a7_a8_a9 = true; - } else if (of_device_is_compatible(np, "arm,cortex-a7")) { - is_a7_a8_a9 = true; - has_arch_timer = true; - } else if (of_device_is_compatible(np, "arm,cortex-a15")) { - is_a15 = true; + if (of_device_is_compatible(np, "arm,cortex-a8")) { + div = 2; + } else if (of_device_is_compatible(np, "arm,cortex-a9")) { + div = 1; + } else if (of_device_is_compatible(np, "arm,cortex-a7") || + of_device_is_compatible(np, "arm,cortex-a15")) { + div = 1; has_arch_timer = true; } } of_node_put(cpus); - if (!max_freq) + if (!max_freq || !div) return; - if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) { - if (is_a7_a8_a9) - shmobile_setup_delay_hz(max_freq, 1, 3); - else if (is_a15) - shmobile_setup_delay_hz(max_freq, 2, 4); - } + if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + shmobile_setup_delay_hz(max_freq, 1, div); } -- cgit v0.10.2 From 04aeb56a173282210c5dab5c9b3071fa3613806f Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Mon, 18 Apr 2016 14:33:54 +0300 Subject: net/mlx4_en: allocate non 0-order pages for RX ring with __GFP_NOMEMALLOC High order pages are optional here since commit 51151a16a60f ("mlx4: allow order-0 memory allocations in RX path"), so here is no reason for depleting reserves. Generic __netdev_alloc_frag() implements the same logic. Signed-off-by: Konstantin Khlebnikov Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 86bcfe5..56d070d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -61,7 +61,7 @@ static int mlx4_alloc_pages(struct mlx4_en_priv *priv, gfp_t gfp = _gfp; if (order) - gfp |= __GFP_COMP | __GFP_NOWARN; + gfp |= __GFP_COMP | __GFP_NOWARN | __GFP_NOMEMALLOC; page = alloc_pages(gfp, order); if (likely(page)) break; -- cgit v0.10.2 From 851b10d60879539bec8acecb35ed361393399282 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Mon, 18 Apr 2016 14:34:05 +0300 Subject: net/mlx4_en: do batched put_page using atomic_sub This patch fixes couple error paths after allocation failures. Atomic set of page reference counter is safe only if it is zero, otherwise set can race with any speculative get_page_unless_zero. Signed-off-by: Konstantin Khlebnikov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 56d070d..7d25bc9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -126,7 +126,9 @@ out: dma_unmap_page(priv->ddev, page_alloc[i].dma, page_alloc[i].page_size, PCI_DMA_FROMDEVICE); page = page_alloc[i].page; - set_page_count(page, 1); + /* Revert changes done by mlx4_alloc_pages */ + page_ref_sub(page, page_alloc[i].page_size / + priv->frag_info[i].frag_stride - 1); put_page(page); } } @@ -176,7 +178,9 @@ out: dma_unmap_page(priv->ddev, page_alloc->dma, page_alloc->page_size, PCI_DMA_FROMDEVICE); page = page_alloc->page; - set_page_count(page, 1); + /* Revert changes done by mlx4_alloc_pages */ + page_ref_sub(page, page_alloc->page_size / + priv->frag_info[i].frag_stride - 1); put_page(page); page_alloc->page = NULL; } -- cgit v0.10.2 From 2309236c13feae619572324efd3e910e66ef6bd0 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Mon, 18 Apr 2016 14:37:10 +0300 Subject: cls_cgroup: get sk_classid only from full sockets skb->sk could point to timewait or request socket which has no sk_classid. Detected as "BUG: KASAN: slab-out-of-bounds in cls_cgroup_classify". Signed-off-by: Konstantin Khlebnikov Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/cls_cgroup.h b/include/net/cls_cgroup.h index c0a92e2..74c9693 100644 --- a/include/net/cls_cgroup.h +++ b/include/net/cls_cgroup.h @@ -17,6 +17,7 @@ #include #include #include +#include #ifdef CONFIG_CGROUP_NET_CLASSID struct cgroup_cls_state { @@ -63,11 +64,13 @@ static inline u32 task_get_classid(const struct sk_buff *skb) * softirqs always disables bh. */ if (in_serving_softirq()) { + struct sock *sk = skb_to_full_sk(skb); + /* If there is an sock_cgroup_classid we'll use that. */ - if (!skb->sk) + if (!sk || !sk_fullsock(sk)) return 0; - classid = sock_cgroup_classid(&skb->sk->sk_cgrp_data); + classid = sock_cgroup_classid(&sk->sk_cgrp_data); } return classid; -- cgit v0.10.2 From 9c995cc9a206a008699da82f6cd01e9b2615649a Mon Sep 17 00:00:00 2001 From: Jorgen Hansen Date: Mon, 18 Apr 2016 23:58:52 -0700 Subject: VSOCK: Only check error on skb_recv_datagram when skb is NULL If skb_recv_datagram returns an skb, we should ignore the err value returned. Otherwise, datagram receives will return EAGAIN when they have to wait for a datagram. Acked-by: Adit Ranadive Signed-off-by: Jorgen Hansen Signed-off-by: David S. Miller diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c index 662bdd2..5621473 100644 --- a/net/vmw_vsock/vmci_transport.c +++ b/net/vmw_vsock/vmci_transport.c @@ -1735,11 +1735,8 @@ static int vmci_transport_dgram_dequeue(struct vsock_sock *vsk, /* Retrieve the head sk_buff from the socket's receive queue. */ err = 0; skb = skb_recv_datagram(&vsk->sk, flags, noblock, &err); - if (err) - return err; - if (!skb) - return -EAGAIN; + return err; dg = (struct vmci_datagram *)skb->data; if (!dg) @@ -2154,7 +2151,7 @@ module_exit(vmci_transport_exit); MODULE_AUTHOR("VMware, Inc."); MODULE_DESCRIPTION("VMCI transport for Virtual Sockets"); -MODULE_VERSION("1.0.3.0-k"); +MODULE_VERSION("1.0.4.0-k"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("vmware_vsock"); MODULE_ALIAS_NETPROTO(PF_VSOCK); -- cgit v0.10.2 From 38740a5b87d53ceb89eb2c970150f6e94e00373a Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 14 Apr 2016 17:01:17 +0200 Subject: usb: gadget: f_fs: Fix use-after-free When using asynchronous read or write operations on the USB endpoints the issuer of the IO request is notified by calling the ki_complete() callback of the submitted kiocb when the URB has been completed. Calling this ki_complete() callback will free kiocb. Make sure that the structure is no longer accessed beyond that point, otherwise undefined behaviour might occur. Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support") Cc: # v3.15+ Signed-off-by: Lars-Peter Clausen Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index e21ca2bd..15b648c 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -646,6 +646,7 @@ static void ffs_user_copy_worker(struct work_struct *work) work); int ret = io_data->req->status ? io_data->req->status : io_data->req->actual; + bool kiocb_has_eventfd = io_data->kiocb->ki_flags & IOCB_EVENTFD; if (io_data->read && ret > 0) { use_mm(io_data->mm); @@ -657,13 +658,11 @@ static void ffs_user_copy_worker(struct work_struct *work) io_data->kiocb->ki_complete(io_data->kiocb, ret, ret); - if (io_data->ffs->ffs_eventfd && - !(io_data->kiocb->ki_flags & IOCB_EVENTFD)) + if (io_data->ffs->ffs_eventfd && !kiocb_has_eventfd) eventfd_signal(io_data->ffs->ffs_eventfd, 1); usb_ep_free_request(io_data->ep, io_data->req); - io_data->kiocb->private = NULL; if (io_data->read) kfree(io_data->to_free); kfree(io_data->buf); -- cgit v0.10.2 From 9859a971ca228725425238756ee89c6133306ec8 Mon Sep 17 00:00:00 2001 From: "Lu, Han" Date: Wed, 20 Apr 2016 10:08:43 +0800 Subject: ALSA: hda - add PCI ID for Intel Broxton-T Add HD Audio Device PCI ID for the Intel Broxton-T platform. It is an HDA Intel PCH controller. Signed-off-by: Lu, Han Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index b680be0..637b8a0 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2232,6 +2232,9 @@ static const struct pci_device_id azx_ids[] = { /* Broxton-P(Apollolake) */ { PCI_DEVICE(0x8086, 0x5a98), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_BROXTON }, + /* Broxton-T */ + { PCI_DEVICE(0x8086, 0x1a98), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_BROXTON }, /* Haswell */ { PCI_DEVICE(0x8086, 0x0a0c), .driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL }, -- cgit v0.10.2 From 2fee7d5b08b6419bb59de9e875d895e3a6e7bf5a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 20 Apr 2016 10:23:31 +0900 Subject: arm64: spin-table: add missing of_node_put() Since of_get_cpu_node() increments refcount, the node should be put. Signed-off-by: Masahiro Yamada Acked-by: Will Deacon Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c index aef3605..18a71bc 100644 --- a/arch/arm64/kernel/smp_spin_table.c +++ b/arch/arm64/kernel/smp_spin_table.c @@ -52,6 +52,7 @@ static void write_pen_release(u64 val) static int smp_spin_table_cpu_init(unsigned int cpu) { struct device_node *dn; + int ret; dn = of_get_cpu_node(cpu, NULL); if (!dn) @@ -60,15 +61,15 @@ static int smp_spin_table_cpu_init(unsigned int cpu) /* * Determine the address from which the CPU is polling. */ - if (of_property_read_u64(dn, "cpu-release-addr", - &cpu_release_addr[cpu])) { + ret = of_property_read_u64(dn, "cpu-release-addr", + &cpu_release_addr[cpu]); + if (ret) pr_err("CPU %d: missing or invalid cpu-release-addr property\n", cpu); - return -1; - } + of_node_put(dn); - return 0; + return ret; } static int smp_spin_table_cpu_prepare(unsigned int cpu) -- cgit v0.10.2 From 89d124cb61b39900959e2839ac06b6339b6a54cb Mon Sep 17 00:00:00 2001 From: Jonas Eymann Date: Tue, 19 Apr 2016 20:33:47 +0300 Subject: crypto: talitos - fix crash in talitos_cra_init() Conversion of talitos driver to the new AEAD interface hasn't been properly tested. AEAD algorithms crash in talitos_cra_init as follows: [...] [ 1.141095] talitos ffe30000.crypto: hwrng [ 1.145381] Unable to handle kernel paging request for data at address 0x00000058 [ 1.152913] Faulting instruction address: 0xc02accc0 [ 1.157910] Oops: Kernel access of bad area, sig: 11 [#1] [ 1.163315] SMP NR_CPUS=2 P1020 RDB [ 1.166810] Modules linked in: [ 1.169875] CPU: 0 PID: 1007 Comm: cryptomgr_test Not tainted 4.4.6 #1 [ 1.176415] task: db5ec200 ti: db4d6000 task.ti: db4d6000 [ 1.181821] NIP: c02accc0 LR: c02acd18 CTR: c02acd04 [ 1.186793] REGS: db4d7d30 TRAP: 0300 Not tainted (4.4.6) [ 1.192457] MSR: 00029000 CR: 95009359 XER: e0000000 [ 1.198585] DEAR: 00000058 ESR: 00000000 GPR00: c017bdc0 db4d7de0 db5ec200 df424b48 00000000 00000000 df424bfc db75a600 GPR08: df424b48 00000000 db75a628 db4d6000 00000149 00000000 c0044cac db5acda0 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000400 df424940 GPR24: df424900 00003083 00000400 c0180000 db75a640 c03e9f84 df424b40 df424b48 [ 1.230978] NIP [c02accc0] talitos_cra_init+0x28/0x6c [ 1.236039] LR [c02acd18] talitos_cra_init_aead+0x14/0x28 [ 1.241443] Call Trace: [ 1.243894] [db4d7de0] [c03e9f84] 0xc03e9f84 (unreliable) [ 1.249322] [db4d7df0] [c017bdc0] crypto_create_tfm+0x5c/0xf0 [ 1.255083] [db4d7e10] [c017beec] crypto_alloc_tfm+0x98/0xf8 [ 1.260769] [db4d7e40] [c0186a20] alg_test_aead+0x28/0xc8 [ 1.266181] [db4d7e60] [c0186718] alg_test+0x260/0x2e0 [ 1.271333] [db4d7ee0] [c0183860] cryptomgr_test+0x30/0x54 [ 1.276843] [db4d7ef0] [c0044d80] kthread+0xd4/0xd8 [ 1.281741] [db4d7f40] [c000e4a4] ret_from_kernel_thread+0x5c/0x64 [ 1.287930] Instruction dump: [ 1.290902] 38600000 4e800020 81230028 7c681b78 81490010 38e9ffc0 3929ffe8 554a073e [ 1.298691] 2b8a000a 7d474f9e 812a0008 91230030 <80e90058> 39270060 7c0004ac 7cc04828 Cc: # 4.3+ Fixes: aeb4c132f33d ("crypto: talitos - Convert to new AEAD interface") Signed-off-by: Jonas Eymann Fix typo - replaced parameter of __crypto_ahash_alg(): s/tfm/alg Remove checkpatch warnings. Add commit message. Signed-off-by: Horia Geant? Signed-off-by: Herbert Xu diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index a0d4a08..3519880 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -2629,21 +2629,11 @@ struct talitos_crypto_alg { struct talitos_alg_template algt; }; -static int talitos_cra_init(struct crypto_tfm *tfm) +static int talitos_init_common(struct talitos_ctx *ctx, + struct talitos_crypto_alg *talitos_alg) { - struct crypto_alg *alg = tfm->__crt_alg; - struct talitos_crypto_alg *talitos_alg; - struct talitos_ctx *ctx = crypto_tfm_ctx(tfm); struct talitos_private *priv; - if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_AHASH) - talitos_alg = container_of(__crypto_ahash_alg(alg), - struct talitos_crypto_alg, - algt.alg.hash); - else - talitos_alg = container_of(alg, struct talitos_crypto_alg, - algt.alg.crypto); - /* update context with ptr to dev */ ctx->dev = talitos_alg->dev; @@ -2661,10 +2651,33 @@ static int talitos_cra_init(struct crypto_tfm *tfm) return 0; } +static int talitos_cra_init(struct crypto_tfm *tfm) +{ + struct crypto_alg *alg = tfm->__crt_alg; + struct talitos_crypto_alg *talitos_alg; + struct talitos_ctx *ctx = crypto_tfm_ctx(tfm); + + if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_AHASH) + talitos_alg = container_of(__crypto_ahash_alg(alg), + struct talitos_crypto_alg, + algt.alg.hash); + else + talitos_alg = container_of(alg, struct talitos_crypto_alg, + algt.alg.crypto); + + return talitos_init_common(ctx, talitos_alg); +} + static int talitos_cra_init_aead(struct crypto_aead *tfm) { - talitos_cra_init(crypto_aead_tfm(tfm)); - return 0; + struct aead_alg *alg = crypto_aead_alg(tfm); + struct talitos_crypto_alg *talitos_alg; + struct talitos_ctx *ctx = crypto_aead_ctx(tfm); + + talitos_alg = container_of(alg, struct talitos_crypto_alg, + algt.alg.aead); + + return talitos_init_common(ctx, talitos_alg); } static int talitos_cra_init_ahash(struct crypto_tfm *tfm) -- cgit v0.10.2 From 340ff60ae93a5db2b2be6f38868df9a1293b6007 Mon Sep 17 00:00:00 2001 From: Horia Geant? Date: Tue, 19 Apr 2016 20:33:48 +0300 Subject: crypto: talitos - fix AEAD tcrypt tests After conversion to new AEAD interface, tcrypt tests fail as follows: [...] [ 1.145414] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos [ 1.153564] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67 [ 1.160041] 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.166509] 00000020: 00 00 00 00 [...] Fix them by providing the correct cipher in & cipher out pointers, i.e. must skip over associated data in src and dst S/G. While here, fix a problem with the HW S/G table index usage: tbl_off must be updated after the pointer to the table entries is set. Cc: # 4.3+ Fixes: aeb4c132f33d ("crypto: talitos - Convert to new AEAD interface") Reported-by: Jonas Eymann Signed-off-by: Horia Geant? Signed-off-by: Herbert Xu diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 3519880..aae0554 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -63,6 +63,14 @@ static void to_talitos_ptr(struct talitos_ptr *ptr, dma_addr_t dma_addr, ptr->eptr = upper_32_bits(dma_addr); } +static void copy_talitos_ptr(struct talitos_ptr *dst_ptr, + struct talitos_ptr *src_ptr, bool is_sec1) +{ + dst_ptr->ptr = src_ptr->ptr; + if (!is_sec1) + dst_ptr->eptr = src_ptr->eptr; +} + static void to_talitos_ptr_len(struct talitos_ptr *ptr, unsigned int len, bool is_sec1) { @@ -1083,21 +1091,20 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq, sg_count = dma_map_sg(dev, areq->src, edesc->src_nents ?: 1, (areq->src == areq->dst) ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); - /* hmac data */ desc->ptr[1].len = cpu_to_be16(areq->assoclen); if (sg_count > 1 && (ret = sg_to_link_tbl_offset(areq->src, sg_count, 0, areq->assoclen, &edesc->link_tbl[tbl_off])) > 1) { - tbl_off += ret; - to_talitos_ptr(&desc->ptr[1], edesc->dma_link_tbl + tbl_off * sizeof(struct talitos_ptr), 0); desc->ptr[1].j_extent = DESC_PTR_LNKTBL_JUMP; dma_sync_single_for_device(dev, edesc->dma_link_tbl, edesc->dma_len, DMA_BIDIRECTIONAL); + + tbl_off += ret; } else { to_talitos_ptr(&desc->ptr[1], sg_dma_address(areq->src), 0); desc->ptr[1].j_extent = 0; @@ -1126,11 +1133,13 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq, if (edesc->desc.hdr & DESC_HDR_MODE1_MDEU_CICV) sg_link_tbl_len += authsize; - if (sg_count > 1 && - (ret = sg_to_link_tbl_offset(areq->src, sg_count, areq->assoclen, - sg_link_tbl_len, - &edesc->link_tbl[tbl_off])) > 1) { - tbl_off += ret; + if (sg_count == 1) { + to_talitos_ptr(&desc->ptr[4], sg_dma_address(areq->src) + + areq->assoclen, 0); + } else if ((ret = sg_to_link_tbl_offset(areq->src, sg_count, + areq->assoclen, sg_link_tbl_len, + &edesc->link_tbl[tbl_off])) > + 1) { desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP; to_talitos_ptr(&desc->ptr[4], edesc->dma_link_tbl + tbl_off * @@ -1138,8 +1147,10 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq, dma_sync_single_for_device(dev, edesc->dma_link_tbl, edesc->dma_len, DMA_BIDIRECTIONAL); - } else - to_talitos_ptr(&desc->ptr[4], sg_dma_address(areq->src), 0); + tbl_off += ret; + } else { + copy_talitos_ptr(&desc->ptr[4], &edesc->link_tbl[tbl_off], 0); + } /* cipher out */ desc->ptr[5].len = cpu_to_be16(cryptlen); @@ -1151,11 +1162,13 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq, edesc->icv_ool = false; - if (sg_count > 1 && - (sg_count = sg_to_link_tbl_offset(areq->dst, sg_count, + if (sg_count == 1) { + to_talitos_ptr(&desc->ptr[5], sg_dma_address(areq->dst) + + areq->assoclen, 0); + } else if ((sg_count = + sg_to_link_tbl_offset(areq->dst, sg_count, areq->assoclen, cryptlen, - &edesc->link_tbl[tbl_off])) > - 1) { + &edesc->link_tbl[tbl_off])) > 1) { struct talitos_ptr *tbl_ptr = &edesc->link_tbl[tbl_off]; to_talitos_ptr(&desc->ptr[5], edesc->dma_link_tbl + @@ -1178,8 +1191,9 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq, edesc->dma_len, DMA_BIDIRECTIONAL); edesc->icv_ool = true; - } else - to_talitos_ptr(&desc->ptr[5], sg_dma_address(areq->dst), 0); + } else { + copy_talitos_ptr(&desc->ptr[5], &edesc->link_tbl[tbl_off], 0); + } /* iv out */ map_single_talitos_ptr(dev, &desc->ptr[6], ivsize, ctx->iv, -- cgit v0.10.2 From 89e9e66ba1b3bde9d8ea90566c2aee20697ad681 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 15 Apr 2016 14:35:39 +0200 Subject: futex: Handle unlock_pi race gracefully If userspace calls UNLOCK_PI unconditionally without trying the TID -> 0 transition in user space first then the user space value might not have the waiters bit set. This opens the following race: CPU0 CPU1 uval = get_user(futex) lock(hb) lock(hb) futex |= FUTEX_WAITERS .... unlock(hb) cmpxchg(futex, uval, newval) So the cmpxchg fails and returns -EINVAL to user space, which is wrong because the futex value is valid. To handle this (yes, yet another) corner case gracefully, check for a flag change and retry. [ tglx: Massaged changelog and slightly reworked implementation ] Fixes: ccf9e6a80d9e ("futex: Make unlock_pi more robust") Signed-off-by: Sebastian Andrzej Siewior Cc: stable@vger.kernel.org Cc: Davidlohr Bueso Cc: Darren Hart Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1460723739-5195-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner diff --git a/kernel/futex.c b/kernel/futex.c index a5d2e74..fd204e1 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1295,10 +1295,20 @@ static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_q *this, if (unlikely(should_fail_futex(true))) ret = -EFAULT; - if (cmpxchg_futex_value_locked(&curval, uaddr, uval, newval)) + if (cmpxchg_futex_value_locked(&curval, uaddr, uval, newval)) { ret = -EFAULT; - else if (curval != uval) - ret = -EINVAL; + } else if (curval != uval) { + /* + * If a unconditional UNLOCK_PI operation (user space did not + * try the TID->0 transition) raced with a waiter setting the + * FUTEX_WAITERS flag between get_user() and locking the hash + * bucket lock, retry the operation. + */ + if ((FUTEX_TID_MASK & curval) == uval) + ret = -EAGAIN; + else + ret = -EINVAL; + } if (ret) { raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); return ret; @@ -2623,6 +2633,15 @@ retry: if (ret == -EFAULT) goto pi_faulted; /* + * A unconditional UNLOCK_PI op raced against a waiter + * setting the FUTEX_WAITERS bit. Try again. + */ + if (ret == -EAGAIN) { + spin_unlock(&hb->lock); + put_futex_key(&key); + goto retry; + } + /* * wake_futex_pi has detected invalid state. Tell user * space. */ -- cgit v0.10.2 From df637193906a6b645d8678c748149a71852e63e9 Mon Sep 17 00:00:00 2001 From: Andrew Goodbody Date: Wed, 20 Apr 2016 16:14:51 +0100 Subject: Revert "Prevent NUll pointer dereference with two PHYs on cpsw" This reverts commit cfe255600154f0072d4a8695590dbd194dfd1aeb This can result in a "Unable to handle kernel paging request" during boot. This was due to using an uninitialised struct member, data->slaves. Signed-off-by: Andrew Goodbody Tested-by: Tony Lindgren Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 5f5bb44..42fdfd4 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -349,7 +349,6 @@ struct cpsw_slave { struct cpsw_slave_data *data; struct phy_device *phy; struct net_device *ndev; - struct device_node *phy_node; u32 port_vlan; u32 open_stat; }; @@ -368,6 +367,7 @@ struct cpsw_priv { spinlock_t lock; struct platform_device *pdev; struct net_device *ndev; + struct device_node *phy_node; struct napi_struct napi_rx; struct napi_struct napi_tx; struct device *dev; @@ -1148,8 +1148,8 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); - if (slave->phy_node) - slave->phy = of_phy_connect(priv->ndev, slave->phy_node, + if (priv->phy_node) + slave->phy = of_phy_connect(priv->ndev, priv->phy_node, &cpsw_adjust_link, 0, slave->data->phy_if); else slave->phy = phy_connect(priv->ndev, slave->data->phy_id, @@ -2033,8 +2033,7 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, if (strcmp(slave_node->name, "slave")) continue; - priv->slaves[i].phy_node = - of_parse_phandle(slave_node, "phy-handle", 0); + priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0); parp = of_get_property(slave_node, "phy_id", &lenp); if (of_phy_is_fixed_link(slave_node)) { struct device_node *phy_node; @@ -2276,22 +2275,12 @@ static int cpsw_probe(struct platform_device *pdev) /* Select default pin state */ pinctrl_pm_select_default_state(&pdev->dev); - data = &priv->data; - priv->slaves = devm_kzalloc(&pdev->dev, - sizeof(struct cpsw_slave) * data->slaves, - GFP_KERNEL); - if (!priv->slaves) { - ret = -ENOMEM; - goto clean_runtime_disable_ret; - } - for (i = 0; i < data->slaves; i++) - priv->slaves[i].slave_num = i; - if (cpsw_probe_dt(priv, pdev)) { dev_err(&pdev->dev, "cpsw: platform data missing\n"); ret = -ENODEV; goto clean_runtime_disable_ret; } + data = &priv->data; if (is_valid_ether_addr(data->slave_data[0].mac_addr)) { memcpy(priv->mac_addr, data->slave_data[0].mac_addr, ETH_ALEN); @@ -2303,6 +2292,16 @@ static int cpsw_probe(struct platform_device *pdev) memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN); + priv->slaves = devm_kzalloc(&pdev->dev, + sizeof(struct cpsw_slave) * data->slaves, + GFP_KERNEL); + if (!priv->slaves) { + ret = -ENOMEM; + goto clean_runtime_disable_ret; + } + for (i = 0; i < data->slaves; i++) + priv->slaves[i].slave_num = i; + priv->slaves[0].ndev = ndev; priv->emac_port = 0; -- cgit v0.10.2 From d5468d7afaa9c9e961e150f0455a14a9f4872a98 Mon Sep 17 00:00:00 2001 From: Vladis Dronov Date: Sun, 31 Jan 2016 14:14:52 -0200 Subject: [media] usbvision: revert commit 588afcc1 Commit 588afcc1c0e4 ("[media] usbvision fix overflow of interfaces array")' should be reverted, because: * "!dev->actconfig->interface[ifnum]" won't catch a case where the value is not NULL but some garbage. This way the system may crash later with GPF. * "(ifnum >= USB_MAXINTERFACES)" does not cover all the error conditions. "ifnum" should be compared to "dev->actconfig-> desc.bNumInterfaces", i.e. compared to the number of "struct usb_interface" kzalloc()-ed, not to USB_MAXINTERFACES. * There is a "struct usb_device" leak in this error path, as there is usb_get_dev(), but no usb_put_dev() on this path. * There is a bug of the same type several lines below with number of endpoints. The code is accessing hard-coded second endpoint ("interface->endpoint[1].desc") which may not exist. It would be great to handle this in the same patch too. * All the concerns above are resolved by already-accepted commit fa52bd50 ("[media] usbvision: fix crash on detecting device with invalid configuration") * Mailing list message: http://www.spinics.net/lists/linux-media/msg94832.html Signed-off-by: Vladis Dronov Signed-off-by: Hans Verkuil Cc: # for v4.5 Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c index 12f5ebb..ad2f3d2 100644 --- a/drivers/media/usb/usbvision/usbvision-video.c +++ b/drivers/media/usb/usbvision/usbvision-video.c @@ -1452,13 +1452,6 @@ static int usbvision_probe(struct usb_interface *intf, printk(KERN_INFO "%s: %s found\n", __func__, usbvision_device_data[model].model_string); - /* - * this is a security check. - * an exploit using an incorrect bInterfaceNumber is known - */ - if (ifnum >= USB_MAXINTERFACES || !dev->actconfig->interface[ifnum]) - return -ENODEV; - if (usbvision_device_data[model].interface >= 0) interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0]; else if (ifnum < dev->actconfig->desc.bNumInterfaces) -- cgit v0.10.2 From 8bbb6568428fa14c5bef120d443c20e0e7d52699 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 15 Apr 2016 08:58:10 -0300 Subject: [media] davinci_vpfe: Revert "staging: media: davinci_vpfe: remove,unnecessary ret variable" This reverts commit afa5d19a2b5f ("staging: media: davinci_vpfe: remove unnecessary ret variable"). This patch is completely bogus and messed up the code big time. I'm not sure what was intended, but this isn't it. Cc: Thaissa Falbo Cc: Greg Kroah-Hartman Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c index b793c04..be72a8e 100644 --- a/drivers/staging/media/davinci_vpfe/vpfe_video.c +++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c @@ -172,9 +172,11 @@ static int vpfe_prepare_pipeline(struct vpfe_video_device *video) static int vpfe_update_pipe_state(struct vpfe_video_device *video) { struct vpfe_pipeline *pipe = &video->pipe; + int ret; - if (vpfe_prepare_pipeline(video)) - return vpfe_prepare_pipeline(video); + ret = vpfe_prepare_pipeline(video); + if (ret) + return ret; /* * Find out if there is any input video @@ -182,9 +184,10 @@ static int vpfe_update_pipe_state(struct vpfe_video_device *video) */ if (pipe->input_num == 0) { pipe->state = VPFE_PIPELINE_STREAM_CONTINUOUS; - if (vpfe_update_current_ext_subdev(video)) { + ret = vpfe_update_current_ext_subdev(video); + if (ret) { pr_err("Invalid external subdev\n"); - return vpfe_update_current_ext_subdev(video); + return ret; } } else { pipe->state = VPFE_PIPELINE_STREAM_SINGLESHOT; @@ -667,6 +670,7 @@ static int vpfe_enum_fmt(struct file *file, void *priv, struct v4l2_subdev *subdev; struct v4l2_format format; struct media_pad *remote; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt\n"); @@ -695,10 +699,11 @@ static int vpfe_enum_fmt(struct file *file, void *priv, sd_fmt.pad = remote->index; sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; /* get output format of remote subdev */ - if (v4l2_subdev_call(subdev, pad, get_fmt, NULL, &sd_fmt)) { + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &sd_fmt); + if (ret) { v4l2_err(&vpfe_dev->v4l2_dev, "invalid remote subdev for video node\n"); - return v4l2_subdev_call(subdev, pad, get_fmt, NULL, &sd_fmt); + return ret; } /* convert to pix format */ mbus.code = sd_fmt.format.code; @@ -725,6 +730,7 @@ static int vpfe_s_fmt(struct file *file, void *priv, struct vpfe_video_device *video = video_drvdata(file); struct vpfe_device *vpfe_dev = video->vpfe_dev; struct v4l2_format format; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt\n"); /* If streaming is started, return error */ @@ -733,8 +739,9 @@ static int vpfe_s_fmt(struct file *file, void *priv, return -EBUSY; } /* get adjacent subdev's output pad format */ - if (__vpfe_video_get_format(video, &format)) - return __vpfe_video_get_format(video, &format); + ret = __vpfe_video_get_format(video, &format); + if (ret) + return ret; *fmt = format; video->fmt = *fmt; return 0; @@ -757,11 +764,13 @@ static int vpfe_try_fmt(struct file *file, void *priv, struct vpfe_video_device *video = video_drvdata(file); struct vpfe_device *vpfe_dev = video->vpfe_dev; struct v4l2_format format; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt\n"); /* get adjacent subdev's output pad format */ - if (__vpfe_video_get_format(video, &format)) - return __vpfe_video_get_format(video, &format); + ret = __vpfe_video_get_format(video, &format); + if (ret) + return ret; *fmt = format; return 0; @@ -838,8 +847,9 @@ static int vpfe_s_input(struct file *file, void *priv, unsigned int index) v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); - if (mutex_lock_interruptible(&video->lock)) - return mutex_lock_interruptible(&video->lock); + ret = mutex_lock_interruptible(&video->lock); + if (ret) + return ret; /* * If streaming is started return device busy * error @@ -940,8 +950,9 @@ static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); /* Call decoder driver function to set the standard */ - if (mutex_lock_interruptible(&video->lock)) - return mutex_lock_interruptible(&video->lock); + ret = mutex_lock_interruptible(&video->lock); + if (ret) + return ret; sdinfo = video->current_ext_subdev; /* If streaming is started, return device busy error */ if (video->started) { @@ -1327,8 +1338,9 @@ static int vpfe_reqbufs(struct file *file, void *priv, return -EINVAL; } - if (mutex_lock_interruptible(&video->lock)) - return mutex_lock_interruptible(&video->lock); + ret = mutex_lock_interruptible(&video->lock); + if (ret) + return ret; if (video->io_usrs != 0) { v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); @@ -1354,10 +1366,11 @@ static int vpfe_reqbufs(struct file *file, void *priv, q->buf_struct_size = sizeof(struct vpfe_cap_buffer); q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - if (vb2_queue_init(q)) { + ret = vb2_queue_init(q); + if (ret) { v4l2_err(&vpfe_dev->v4l2_dev, "vb2_queue_init() failed\n"); vb2_dma_contig_cleanup_ctx(vpfe_dev->pdev); - return vb2_queue_init(q); + return ret; } fh->io_allowed = 1; @@ -1533,8 +1546,9 @@ static int vpfe_streamoff(struct file *file, void *priv, return -EINVAL; } - if (mutex_lock_interruptible(&video->lock)) - return mutex_lock_interruptible(&video->lock); + ret = mutex_lock_interruptible(&video->lock); + if (ret) + return ret; vpfe_stop_capture(video); ret = vb2_streamoff(&video->buffer_queue, buf_type); -- cgit v0.10.2 From 4bfeefd085acf1ab70ecda6087fad6c32b2b065f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 19 Apr 2016 09:50:09 -0700 Subject: Input: twl6040-vibra - do not reparent to grandparent For devm-managed input devices we should not modify input device's parent, otherwise automatic release of resources will not work properly. Tested-by: "H. Nikolaus Schaller" Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index 0c853c2..53e33fa 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -357,7 +357,6 @@ static int twl6040_vibra_probe(struct platform_device *pdev) info->input_dev->name = "twl6040:vibrator"; info->input_dev->id.version = 1; - info->input_dev->dev.parent = pdev->dev.parent; info->input_dev->close = twl6040_vibra_close; __set_bit(FF_RUMBLE, info->input_dev->ffbit); -- cgit v0.10.2 From dcc7597116c6713353522eb13c765063ff88bb89 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 19 Apr 2016 09:54:32 -0700 Subject: Input: twl4030-vibra - do not reparent to grandparent For devm-managed input devices we should not modify input device's parent, otherwise automatic release of resources will not work properly. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index 10c4e3d..caa5a62 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -222,7 +222,6 @@ static int twl4030_vibra_probe(struct platform_device *pdev) info->input_dev->name = "twl4030:vibrator"; info->input_dev->id.version = 1; - info->input_dev->dev.parent = pdev->dev.parent; info->input_dev->close = twl4030_vibra_close; __set_bit(FF_RUMBLE, info->input_dev->ffbit); -- cgit v0.10.2 From c0ff8aaae369559fbef0e9f2606a9ae92db14f2f Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 19 Apr 2016 14:33:32 +0200 Subject: thermal: of: add __init attribute Add __init attribute on a function that is only called from other __init functions and that is not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the function is put in the .text.unlikely segment. Declaring it as __init will cause it to be put in the .init.text and to disappear after initialization. The result of objdump -x on the function before the change is as follows: 0000000000000086 l F .text.unlikely 0000000000000739 thermal_of_build_thermal_zone And after the change it is as follows: 0000000000000000 l F .init.text 0000000000000734 thermal_of_build_thermal_zone Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Signed-off-by: Julia Lawall Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 49ac23d..d8ec44b 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -803,8 +803,8 @@ static int thermal_of_populate_trip(struct device_node *np, * otherwise, it returns a corresponding ERR_PTR(). Caller must * check the return value with help of IS_ERR() helper. */ -static struct __thermal_zone * -thermal_of_build_thermal_zone(struct device_node *np) +static struct __thermal_zone +__init *thermal_of_build_thermal_zone(struct device_node *np) { struct device_node *child = NULL, *gchild; struct __thermal_zone *tz; -- cgit v0.10.2 From f9d038144a171d42e057143b247ff7a12a5b06f5 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 6 Apr 2016 19:30:18 +0100 Subject: thermal: power_allocator: req_range multiplication should be a 64 bit type req_range is declared as a u64 to cope with overflows in the multiplication of two u32. As both req_power and power_range are u32, we need to make sure the multiplication is done with u64 types. Reported-by: Dan Carpenter Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c index 1246aa6..2f1a863 100644 --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/power_allocator.c @@ -301,7 +301,7 @@ static void divvy_up_power(u32 *req_power, u32 *max_power, int num_actors, capped_extra_power = 0; extra_power = 0; for (i = 0; i < num_actors; i++) { - u64 req_range = req_power[i] * power_range; + u64 req_range = (u64)req_power[i] * power_range; granted_power[i] = DIV_ROUND_CLOSEST_ULL(req_range, total_req_power); -- cgit v0.10.2 From 9ebfb4e09959b03b58b65b5a6c04f70dd57d4f6b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 19 Apr 2016 16:45:01 -0700 Subject: thermal: minor mtk_thermal.c cleanups Trivial cleanups: - delete one duplicate #include - end email address with closing '>' Signed-off-by: Randy Dunlap Cc: Zhang Rui Cc: Eduardo Valentin Cc: Sascha Hauer Cc: Hanyi Wu Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 3d93b1c..507632b 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -27,7 +27,6 @@ #include #include #include -#include /* AUXADC Registers */ #define AUXADC_CON0_V 0x000 @@ -619,7 +618,7 @@ static struct platform_driver mtk_thermal_driver = { module_platform_driver(mtk_thermal_driver); -MODULE_AUTHOR("Sascha Hauer "); MODULE_AUTHOR("Hanyi Wu "); MODULE_DESCRIPTION("Mediatek thermal driver"); MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From 62e14f6fd383f756ff3fe5f6fb7aa5b546bb47e3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 19 Apr 2016 09:44:23 -0700 Subject: thermal: fix mtk_thermal build dependency Fix build errors when MTK_THERMAL=y and NVMEM=m by preventing that Kconfig combination. drivers/built-in.o: In function `mtk_thermal_probe': mtk_thermal.c:(.text+0xffa8f): undefined reference to `nvmem_cell_get' mtk_thermal.c:(.text+0xffabe): undefined reference to `nvmem_cell_read' mtk_thermal.c:(.text+0xffac9): undefined reference to `nvmem_cell_put' Signed-off-by: Randy Dunlap Cc: Zhang Rui Cc: Eduardo Valentin Cc: Cc: Sascha Hauer Cc: Hanyi Wu Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index c37eedc..5c77110 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -376,6 +376,7 @@ config MTK_THERMAL tristate "Temperature sensor driver for mediatek SoCs" depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_IOMEM + depends on NVMEM || NVMEM=n default y help Enable this option if you want to have support for thermal management -- cgit v0.10.2 From 1d0fd42fa31d18ba0a3e0dd008c9e93e1cebe451 Mon Sep 17 00:00:00 2001 From: Wei Ni Date: Thu, 3 Mar 2016 17:33:46 +0800 Subject: thermal: consistently use int for trip temp The commit 17e8351a7739 consistently use int for temperature, however it missed a few in trip temperature and thermal_core. In current codes, the trip->temperature used "unsigned long" and zone->temperature used"int", if the temperature is negative value, it will get wrong result when compare temperature with trip temperature. This patch can fix it. Signed-off-by: Wei Ni Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index d4b5465..f1db496 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -688,7 +688,7 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr, { struct thermal_zone_device *tz = to_thermal_zone(dev); int trip, ret; - unsigned long temperature; + int temperature; if (!tz->ops->set_trip_temp) return -EPERM; @@ -696,7 +696,7 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr, if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip)) return -EINVAL; - if (kstrtoul(buf, 10, &temperature)) + if (kstrtoint(buf, 10, &temperature)) return -EINVAL; ret = tz->ops->set_trip_temp(tz, trip, temperature); @@ -899,9 +899,9 @@ emul_temp_store(struct device *dev, struct device_attribute *attr, { struct thermal_zone_device *tz = to_thermal_zone(dev); int ret = 0; - unsigned long temperature; + int temperature; - if (kstrtoul(buf, 10, &temperature)) + if (kstrtoint(buf, 10, &temperature)) return -EINVAL; if (!tz->ops->set_emul_temp) { diff --git a/include/linux/thermal.h b/include/linux/thermal.h index a55d052..1b8a5a7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -352,8 +352,8 @@ struct thermal_zone_of_device_ops { struct thermal_trip { struct device_node *np; - unsigned long int temperature; - unsigned long int hysteresis; + int temperature; + int hysteresis; enum thermal_trip_type type; }; -- cgit v0.10.2 From a6f4850dbca66e46a73b8774e85aaf9fc0caf265 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Apr 2016 15:15:20 +0200 Subject: thermal: fix Mediatek thermal controller build At least with CONFIG_COMPILE_TEST, there's no reason to assume that CONFIG_RESET_CONTROLLER is set, but the code for this controller requires it since it calls device_reset(). Make CONFIG_MTK_THERMAL properly depend on CONFIG_RESET_CONTROLLER. Signed-off-by: Johannes Berg Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 5c77110..3c3dc4a 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -377,6 +377,7 @@ config MTK_THERMAL depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_IOMEM depends on NVMEM || NVMEM=n + depends on RESET_CONTROLLER default y help Enable this option if you want to have support for thermal management -- cgit v0.10.2 From dba599091c191d209b1499511a524ad9657c0e5a Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 15 Apr 2016 09:41:35 +0200 Subject: s390/pci: fix use after free in dma_init After a failure during registration of the dma_table (because of the function being in error state) we free its memory but don't reset the associated pointer to zero. When we then receive a notification from firmware (about the function being in error state) we'll try to walk and free the dma_table again. Fix this by resetting the dma_table pointer. In addition to that make sure that we free the iommu_bitmap when appropriate. Signed-off-by: Sebastian Ott Reviewed-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c index e595e89..1ea8c07 100644 --- a/arch/s390/pci/pci_dma.c +++ b/arch/s390/pci/pci_dma.c @@ -457,7 +457,7 @@ int zpci_dma_init_device(struct zpci_dev *zdev) zdev->dma_table = dma_alloc_cpu_table(); if (!zdev->dma_table) { rc = -ENOMEM; - goto out_clean; + goto out; } /* @@ -477,18 +477,22 @@ int zpci_dma_init_device(struct zpci_dev *zdev) zdev->iommu_bitmap = vzalloc(zdev->iommu_pages / 8); if (!zdev->iommu_bitmap) { rc = -ENOMEM; - goto out_reg; + goto free_dma_table; } rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma, (u64) zdev->dma_table); if (rc) - goto out_reg; - return 0; + goto free_bitmap; -out_reg: + return 0; +free_bitmap: + vfree(zdev->iommu_bitmap); + zdev->iommu_bitmap = NULL; +free_dma_table: dma_free_cpu_table(zdev->dma_table); -out_clean: + zdev->dma_table = NULL; +out: return rc; } -- cgit v0.10.2 From 723cacbd9dc79582e562c123a0bacf8bfc69e72a Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 15 Apr 2016 16:38:40 +0200 Subject: s390/mm: fix asce_bits handling with dynamic pagetable levels There is a race with multi-threaded applications between context switch and pagetable upgrade. In switch_mm() a new user_asce is built from mm->pgd and mm->context.asce_bits, w/o holding any locks. A concurrent mmap with a pagetable upgrade on another thread in crst_table_upgrade() could already have set new asce_bits, but not yet the new mm->pgd. This would result in a corrupt user_asce in switch_mm(), and eventually in a kernel panic from a translation exception. Fix this by storing the complete asce instead of just the asce_bits, which can then be read atomically from switch_mm(), so that it either sees the old value or the new value, but no mixture. Both cases are OK. Having the old value would result in a page fault on access to the higher level memory, but the fault handler would see the new mm->pgd, if it was a valid access after the mmap on the other thread has completed. So as worst-case scenario we would have a page fault loop for the racing thread until the next time slice. Also remove dead code and simplify the upgrade/downgrade path, there are no upgrades from 2 levels, and only downgrades from 3 levels for compat tasks. There are also no concurrent upgrades, because the mmap_sem is held with down_write() in do_mmap, so the flush and table checks during upgrade can be removed. Reported-by: Michael Munday Reviewed-by: Martin Schwidefsky Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h index d29ad95..081b2ad 100644 --- a/arch/s390/include/asm/mmu.h +++ b/arch/s390/include/asm/mmu.h @@ -11,7 +11,7 @@ typedef struct { spinlock_t list_lock; struct list_head pgtable_list; struct list_head gmap_list; - unsigned long asce_bits; + unsigned long asce; unsigned long asce_limit; unsigned long vdso_base; /* The mmu context allocates 4K page tables. */ diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index d321469..c837b79 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -26,12 +26,28 @@ static inline int init_new_context(struct task_struct *tsk, mm->context.has_pgste = 0; mm->context.use_skey = 0; #endif - if (mm->context.asce_limit == 0) { + switch (mm->context.asce_limit) { + case 1UL << 42: + /* + * forked 3-level task, fall through to set new asce with new + * mm->pgd + */ + case 0: /* context created by exec, set asce limit to 4TB */ - mm->context.asce_bits = _ASCE_TABLE_LENGTH | - _ASCE_USER_BITS | _ASCE_TYPE_REGION3; mm->context.asce_limit = STACK_TOP_MAX; - } else if (mm->context.asce_limit == (1UL << 31)) { + mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH | + _ASCE_USER_BITS | _ASCE_TYPE_REGION3; + break; + case 1UL << 53: + /* forked 4-level task, set new asce with new mm->pgd */ + mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH | + _ASCE_USER_BITS | _ASCE_TYPE_REGION2; + break; + case 1UL << 31: + /* forked 2-level compat task, set new asce with new mm->pgd */ + mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH | + _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT; + /* pgd_alloc() did not increase mm->nr_pmds */ mm_inc_nr_pmds(mm); } crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm)); @@ -42,7 +58,7 @@ static inline int init_new_context(struct task_struct *tsk, static inline void set_user_asce(struct mm_struct *mm) { - S390_lowcore.user_asce = mm->context.asce_bits | __pa(mm->pgd); + S390_lowcore.user_asce = mm->context.asce; if (current->thread.mm_segment.ar4) __ctl_load(S390_lowcore.user_asce, 7, 7); set_cpu_flag(CIF_ASCE); @@ -71,7 +87,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, { int cpu = smp_processor_id(); - S390_lowcore.user_asce = next->context.asce_bits | __pa(next->pgd); + S390_lowcore.user_asce = next->context.asce; if (prev == next) return; if (MACHINE_HAS_TLB_LC) diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index 9b3d9b6..da34cb6 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -52,8 +52,8 @@ static inline unsigned long pgd_entry_type(struct mm_struct *mm) return _REGION2_ENTRY_EMPTY; } -int crst_table_upgrade(struct mm_struct *, unsigned long limit); -void crst_table_downgrade(struct mm_struct *, unsigned long limit); +int crst_table_upgrade(struct mm_struct *); +void crst_table_downgrade(struct mm_struct *); static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) { diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index d6fd22e..18cdede 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -175,7 +175,7 @@ extern __vector128 init_task_fpu_regs[__NUM_VXRS]; regs->psw.mask = PSW_USER_BITS | PSW_MASK_BA; \ regs->psw.addr = new_psw; \ regs->gprs[15] = new_stackp; \ - crst_table_downgrade(current->mm, 1UL << 31); \ + crst_table_downgrade(current->mm); \ execve_tail(); \ } while (0) diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index ca148f7..a2e6ef3 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -110,8 +110,7 @@ static inline void __tlb_flush_asce(struct mm_struct *mm, unsigned long asce) static inline void __tlb_flush_kernel(void) { if (MACHINE_HAS_IDTE) - __tlb_flush_idte((unsigned long) init_mm.pgd | - init_mm.context.asce_bits); + __tlb_flush_idte(init_mm.context.asce); else __tlb_flush_global(); } @@ -133,8 +132,7 @@ static inline void __tlb_flush_asce(struct mm_struct *mm, unsigned long asce) static inline void __tlb_flush_kernel(void) { if (MACHINE_HAS_TLB_LC) - __tlb_flush_idte_local((unsigned long) init_mm.pgd | - init_mm.context.asce_bits); + __tlb_flush_idte_local(init_mm.context.asce); else __tlb_flush_local(); } @@ -148,8 +146,7 @@ static inline void __tlb_flush_mm(struct mm_struct * mm) * only ran on the local cpu. */ if (MACHINE_HAS_IDTE && list_empty(&mm->context.gmap_list)) - __tlb_flush_asce(mm, (unsigned long) mm->pgd | - mm->context.asce_bits); + __tlb_flush_asce(mm, mm->context.asce); else __tlb_flush_full(mm); } diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index c7b0451..2489b2e 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -89,7 +89,8 @@ void __init paging_init(void) asce_bits = _ASCE_TYPE_REGION3 | _ASCE_TABLE_LENGTH; pgd_type = _REGION3_ENTRY_EMPTY; } - S390_lowcore.kernel_asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits; + init_mm.context.asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits; + S390_lowcore.kernel_asce = init_mm.context.asce; clear_table((unsigned long *) init_mm.pgd, pgd_type, sizeof(unsigned long)*2048); vmem_map_init(); diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c index 45c4daa..89cf09e 100644 --- a/arch/s390/mm/mmap.c +++ b/arch/s390/mm/mmap.c @@ -174,7 +174,7 @@ int s390_mmap_check(unsigned long addr, unsigned long len, unsigned long flags) if (!(flags & MAP_FIXED)) addr = 0; if ((addr + len) >= TASK_SIZE) - return crst_table_upgrade(current->mm, TASK_MAX_SIZE); + return crst_table_upgrade(current->mm); return 0; } @@ -191,7 +191,7 @@ s390_get_unmapped_area(struct file *filp, unsigned long addr, return area; if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < TASK_MAX_SIZE) { /* Upgrade the page table to 4 levels and retry. */ - rc = crst_table_upgrade(mm, TASK_MAX_SIZE); + rc = crst_table_upgrade(mm); if (rc) return (unsigned long) rc; area = arch_get_unmapped_area(filp, addr, len, pgoff, flags); @@ -213,7 +213,7 @@ s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr, return area; if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < TASK_MAX_SIZE) { /* Upgrade the page table to 4 levels and retry. */ - rc = crst_table_upgrade(mm, TASK_MAX_SIZE); + rc = crst_table_upgrade(mm); if (rc) return (unsigned long) rc; area = arch_get_unmapped_area_topdown(filp, addr, len, diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c index f6c3de2..e8b5962 100644 --- a/arch/s390/mm/pgalloc.c +++ b/arch/s390/mm/pgalloc.c @@ -76,81 +76,52 @@ static void __crst_table_upgrade(void *arg) __tlb_flush_local(); } -int crst_table_upgrade(struct mm_struct *mm, unsigned long limit) +int crst_table_upgrade(struct mm_struct *mm) { unsigned long *table, *pgd; - unsigned long entry; - int flush; - BUG_ON(limit > TASK_MAX_SIZE); - flush = 0; -repeat: + /* upgrade should only happen from 3 to 4 levels */ + BUG_ON(mm->context.asce_limit != (1UL << 42)); + table = crst_table_alloc(mm); if (!table) return -ENOMEM; + spin_lock_bh(&mm->page_table_lock); - if (mm->context.asce_limit < limit) { - pgd = (unsigned long *) mm->pgd; - if (mm->context.asce_limit <= (1UL << 31)) { - entry = _REGION3_ENTRY_EMPTY; - mm->context.asce_limit = 1UL << 42; - mm->context.asce_bits = _ASCE_TABLE_LENGTH | - _ASCE_USER_BITS | - _ASCE_TYPE_REGION3; - } else { - entry = _REGION2_ENTRY_EMPTY; - mm->context.asce_limit = 1UL << 53; - mm->context.asce_bits = _ASCE_TABLE_LENGTH | - _ASCE_USER_BITS | - _ASCE_TYPE_REGION2; - } - crst_table_init(table, entry); - pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd); - mm->pgd = (pgd_t *) table; - mm->task_size = mm->context.asce_limit; - table = NULL; - flush = 1; - } + pgd = (unsigned long *) mm->pgd; + crst_table_init(table, _REGION2_ENTRY_EMPTY); + pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd); + mm->pgd = (pgd_t *) table; + mm->context.asce_limit = 1UL << 53; + mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH | + _ASCE_USER_BITS | _ASCE_TYPE_REGION2; + mm->task_size = mm->context.asce_limit; spin_unlock_bh(&mm->page_table_lock); - if (table) - crst_table_free(mm, table); - if (mm->context.asce_limit < limit) - goto repeat; - if (flush) - on_each_cpu(__crst_table_upgrade, mm, 0); + + on_each_cpu(__crst_table_upgrade, mm, 0); return 0; } -void crst_table_downgrade(struct mm_struct *mm, unsigned long limit) +void crst_table_downgrade(struct mm_struct *mm) { pgd_t *pgd; + /* downgrade should only happen from 3 to 2 levels (compat only) */ + BUG_ON(mm->context.asce_limit != (1UL << 42)); + if (current->active_mm == mm) { clear_user_asce(); __tlb_flush_mm(mm); } - while (mm->context.asce_limit > limit) { - pgd = mm->pgd; - switch (pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) { - case _REGION_ENTRY_TYPE_R2: - mm->context.asce_limit = 1UL << 42; - mm->context.asce_bits = _ASCE_TABLE_LENGTH | - _ASCE_USER_BITS | - _ASCE_TYPE_REGION3; - break; - case _REGION_ENTRY_TYPE_R3: - mm->context.asce_limit = 1UL << 31; - mm->context.asce_bits = _ASCE_TABLE_LENGTH | - _ASCE_USER_BITS | - _ASCE_TYPE_SEGMENT; - break; - default: - BUG(); - } - mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN); - mm->task_size = mm->context.asce_limit; - crst_table_free(mm, (unsigned long *) pgd); - } + + pgd = mm->pgd; + mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN); + mm->context.asce_limit = 1UL << 31; + mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH | + _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT; + mm->task_size = mm->context.asce_limit; + crst_table_free(mm, (unsigned long *) pgd); + if (current->active_mm == mm) set_user_asce(mm); } -- cgit v0.10.2 From fe1bce9e2107ba3a8faffe572483b6974201a0e6 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Wed, 20 Apr 2016 20:09:24 -0700 Subject: futex: Acknowledge a new waiter in counter before plist Otherwise an incoming waker on the dest hash bucket can miss the waiter adding itself to the plist during the lockless check optimization (small window but still the correct way of doing this); similarly to the decrement counterpart. Suggested-by: Peter Zijlstra Signed-off-by: Davidlohr Bueso Cc: Davidlohr Bueso Cc: bigeasy@linutronix.de Cc: dvhart@infradead.org Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1461208164-29150-1-git-send-email-dave@stgolabs.net Signed-off-by: Thomas Gleixner diff --git a/kernel/futex.c b/kernel/futex.c index fd204e1..c20f06f 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1535,8 +1535,8 @@ void requeue_futex(struct futex_q *q, struct futex_hash_bucket *hb1, if (likely(&hb1->chain != &hb2->chain)) { plist_del(&q->list, &hb1->chain); hb_waiters_dec(hb1); - plist_add(&q->list, &hb2->chain); hb_waiters_inc(hb2); + plist_add(&q->list, &hb2->chain); q->lock_ptr = &hb2->lock; } get_futex_key_refs(key2); -- cgit v0.10.2 From fba7cd681b6155e2d93e7862fcd6f970336b83c3 Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Thu, 14 Apr 2016 15:36:03 +0200 Subject: asm-generic/futex: Re-enable preemption in futex_atomic_cmpxchg_inatomic() The recent decoupling of pagefault disable and preempt disable added an explicit preempt_disable/enable() pair to the futex_atomic_cmpxchg_inatomic() implementation in asm-generic/futex.h. But it forgot to add preempt_enable() calls to the error handling code pathes, which results in a preemption count imbalance. This is observable on boot when the test for atomic_cmpxchg() is calling futex_atomic_cmpxchg_inatomic() on a NULL pointer. Add the missing preempt_enable() calls to the error handling code pathes. [ tglx: Massaged changelog ] Fixes: d9b9ff8c1889 ("sched/preempt, futex: Disable preemption in UP futex_atomic_cmpxchg_inatomic() explicitly") Signed-off-by: Romain Perier Cc: linux-arch@vger.kernel.org Cc: Thomas Petazzoni Cc: Arnd Bergmann Cc: Peter Zijlstra Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1460640963-690-1-git-send-email-romain.perier@free-electrons.com Signed-off-by: Thomas Gleixner diff --git a/include/asm-generic/futex.h b/include/asm-generic/futex.h index e56272c..bf2d34c 100644 --- a/include/asm-generic/futex.h +++ b/include/asm-generic/futex.h @@ -108,11 +108,15 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 val; preempt_disable(); - if (unlikely(get_user(val, uaddr) != 0)) + if (unlikely(get_user(val, uaddr) != 0)) { + preempt_enable(); return -EFAULT; + } - if (val == oldval && unlikely(put_user(newval, uaddr) != 0)) + if (val == oldval && unlikely(put_user(newval, uaddr) != 0)) { + preempt_enable(); return -EFAULT; + } *uval = val; preempt_enable(); -- cgit v0.10.2 From 4589f450fb285ab85f7513b6649e51ec2a820653 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Thu, 21 Apr 2016 10:08:32 +0100 Subject: genirq: Dont allow affinity mask to be updated on IPIs The IPI domain re-purposes the IRQ affinity to signify the mask of CPUs that this IPI will deliver to. This must not be modified before the IPI is destroyed again, so set the IRQ_NO_BALANCING flag to prevent the affinity being overwritten by setup_affinity(). Without this, if an IPI is reserved for a single target CPU, then allocated using __setup_irq(), the affinity is overwritten with cpu_online_mask. When ipi_destroy() is subsequently called on a multi-cpu system, it will attempt to free cpumask_weight() IRQs that were never allocated, and crash. Fixes: d17bf24e6952 ("genirq: Add a new generic IPI reservation code to irq core") Signed-off-by: Matt Redfearn Cc: linux-mips@linux-mips.org Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: ralf@linux-mips.org Cc: Qais Yousef Cc: lisa.parratt@imgtec.com Link: http://lkml.kernel.org/r/1461229712-13057-1-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner diff --git a/kernel/irq/ipi.c b/kernel/irq/ipi.c index c37f34b..14777af 100644 --- a/kernel/irq/ipi.c +++ b/kernel/irq/ipi.c @@ -94,6 +94,7 @@ unsigned int irq_reserve_ipi(struct irq_domain *domain, data = irq_get_irq_data(virq + i); cpumask_copy(data->common->affinity, dest); data->common->ipi_offset = offset; + irq_set_status_flags(virq + i, IRQ_NO_BALANCING); } return virq; -- cgit v0.10.2 From 2144fff7df8e76654fa72b0a9d2324ce2e0c8a5c Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 21 Apr 2016 13:52:38 +0200 Subject: drm/etnaviv: don't move linear memory window on 3D cores without MC2.0 On cores with MC1.0 the memory window offset is not properly respected by all engines in the core, leading to different views of the memory if the offset in non-zero. This causes relocs for those engines to be wrong and might lead to other subtile problems. Rather than trying to work around this, just disable the linear memory window offset for those cores. Suggested-by: Russell King Signed-off-by: Lucas Stach diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index 09198d0..306dde1 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -572,6 +572,24 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu) goto fail; } + /* + * Set the GPU linear window to be at the end of the DMA window, where + * the CMA area is likely to reside. This ensures that we are able to + * map the command buffers while having the linear window overlap as + * much RAM as possible, so we can optimize mappings for other buffers. + * + * For 3D cores only do this if MC2.0 is present, as with MC1.0 it leads + * to different views of the memory on the individual engines. + */ + if (!(gpu->identity.features & chipFeatures_PIPE_3D) || + (gpu->identity.minor_features0 & chipMinorFeatures0_MC20)) { + u32 dma_mask = (u32)dma_get_required_mask(gpu->dev); + if (dma_mask < PHYS_OFFSET + SZ_2G) + gpu->memory_base = PHYS_OFFSET; + else + gpu->memory_base = dma_mask - SZ_2G + 1; + } + ret = etnaviv_hw_reset(gpu); if (ret) goto fail; @@ -1566,7 +1584,6 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct etnaviv_gpu *gpu; - u32 dma_mask; int err = 0; gpu = devm_kzalloc(dev, sizeof(*gpu), GFP_KERNEL); @@ -1576,18 +1593,6 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev) gpu->dev = &pdev->dev; mutex_init(&gpu->lock); - /* - * Set the GPU linear window to be at the end of the DMA window, where - * the CMA area is likely to reside. This ensures that we are able to - * map the command buffers while having the linear window overlap as - * much RAM as possible, so we can optimize mappings for other buffers. - */ - dma_mask = (u32)dma_get_required_mask(dev); - if (dma_mask < PHYS_OFFSET + SZ_2G) - gpu->memory_base = PHYS_OFFSET; - else - gpu->memory_base = dma_mask - SZ_2G + 1; - /* Map registers: */ gpu->mmio = etnaviv_ioremap(pdev, NULL, dev_name(gpu->dev)); if (IS_ERR(gpu->mmio)) -- cgit v0.10.2 From cbcc72e037b8a3eb1fad3c1ae22021df21c97a51 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Thu, 21 Apr 2016 10:24:34 +0100 Subject: drivers/perf: arm-pmu: fix RCU usage on pmu resume from low-power Commit da4e4f18afe0 ("drivers/perf: arm_pmu: implement CPU_PM notifier") added code in the arm perf infrastructure that allows the kernel to save/restore perf counters whenever the CPU enters a low-power state. The kernel saves/restores the counters for each active event through the armpmu_{stop/start} ARM pmu API, so that the low-power state enter/exit cycle is emulated through pmu start/stop operations for each event in use. However, calling armpmu_start() for each active event on power up executes code that requires RCU locking (perf_event_update_userpage()) to be functional, so, given that the core may call the CPU_PM notifiers while running the idle thread in an quiescent RCU state this is not allowed as detected through the following splat when kernel is run with CONFIG_PROVE_LOCKING enabled: [ 49.293286] [ 49.294761] =============================== [ 49.298895] [ INFO: suspicious RCU usage. ] [ 49.303031] 4.6.0-rc3+ #421 Not tainted [ 49.306821] ------------------------------- [ 49.310956] include/linux/rcupdate.h:872 rcu_read_lock() used illegally while idle! [ 49.318530] [ 49.318530] other info that might help us debug this: [ 49.318530] [ 49.326451] [ 49.326451] RCU used illegally from idle CPU! [ 49.326451] rcu_scheduler_active = 1, debug_locks = 0 [ 49.337209] RCU used illegally from extended quiescent state! [ 49.342892] 2 locks held by swapper/2/0: [ 49.346768] #0: (cpu_pm_notifier_lock){......}, at: [] cpu_pm_exit+0x18/0x80 [ 49.355492] #1: (rcu_read_lock){......}, at: [] perf_event_update_userpage+0x0/0x260 This patch wraps the armpmu_start() call (that indirectly calls perf_event_update_userpage()) on CPU_PM notifier power state exit (or failed entry) within the RCU_NONIDLE() macro so that the RCU subsystem is made aware the calling cpu is not idle from an RCU perspective for the armpmu_start() call duration, therefore fixing the issue. Fixes: da4e4f18afe0 ("drivers/perf: arm_pmu: implement CPU_PM notifier") Signed-off-by: Lorenzo Pieralisi Reported-by: James Morse Suggested-by: Kevin Hilman Cc: Ashwin Chaugule Cc: Kevin Hilman Cc: Sudeep Holla Cc: Daniel Lezcano Cc: Mathieu Poirier Acked-by: Mark Rutland Acked-by: Paul E. McKenney Acked-by: Will Deacon Signed-off-by: Catalin Marinas diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c index 32346b5..f700908 100644 --- a/drivers/perf/arm_pmu.c +++ b/drivers/perf/arm_pmu.c @@ -737,8 +737,19 @@ static void cpu_pm_pmu_setup(struct arm_pmu *armpmu, unsigned long cmd) break; case CPU_PM_EXIT: case CPU_PM_ENTER_FAILED: - /* Restore and enable the counter */ - armpmu_start(event, PERF_EF_RELOAD); + /* + * Restore and enable the counter. + * armpmu_start() indirectly calls + * + * perf_event_update_userpage() + * + * that requires RCU read locking to be functional, + * wrap the call within RCU_NONIDLE to make the + * RCU subsystem aware this cpu is not idle from + * an RCU perspective for the armpmu_start() call + * duration. + */ + RCU_NONIDLE(armpmu_start(event, PERF_EF_RELOAD)); break; default: break; -- cgit v0.10.2 From 5f634956cc550768ebd75cf26fdba01044bc600e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 20 Apr 2016 14:53:32 +0100 Subject: iommu/arm-smmu: Fix stream-match conflict with IOMMU_DOMAIN_DMA Commit cbf8277ef456 ("iommu/arm-smmu: Treat IOMMU_DOMAIN_DMA as bypass for now") ignores requests to attach a device to the default domain since, without IOMMU-basked DMA ops available everywhere, the default domain will just lead to unexpected transaction faults being reported. Unfortunately, the way this was implemented on SMMUv2 causes a regression with VFIO PCI device passthrough under KVM on AMD Seattle. On this system, the host controller device is associated with both a pci_dev *and* a platform_device, and can therefore end up with duplicate SMR entries, resulting in a stream-match conflict at runtime. This patch amends the original fix so that attaching to IOMMU_DOMAIN_DMA is rejected even before configuring the SMRs. This restores the old behaviour for now, but we'll need to look at handing host controllers specially when we come to supporting the default domain fully. Reported-by: Eric Auger Tested-by: Eric Auger Tested-by: Yang Shi Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 2409e3b..5158feb 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1089,18 +1089,20 @@ static int arm_smmu_domain_add_master(struct arm_smmu_domain *smmu_domain, struct arm_smmu_device *smmu = smmu_domain->smmu; void __iomem *gr0_base = ARM_SMMU_GR0(smmu); - /* Devices in an IOMMU group may already be configured */ - ret = arm_smmu_master_configure_smrs(smmu, cfg); - if (ret) - return ret == -EEXIST ? 0 : ret; - /* * FIXME: This won't be needed once we have IOMMU-backed DMA ops - * for all devices behind the SMMU. + * for all devices behind the SMMU. Note that we need to take + * care configuring SMRs for devices both a platform_device and + * and a PCI device (i.e. a PCI host controller) */ if (smmu_domain->domain.type == IOMMU_DOMAIN_DMA) return 0; + /* Devices in an IOMMU group may already be configured */ + ret = arm_smmu_master_configure_smrs(smmu, cfg); + if (ret) + return ret == -EEXIST ? 0 : ret; + for (i = 0; i < cfg->num_streamids; ++i) { u32 idx, s2cr; -- cgit v0.10.2 From 9800699c645952da6a7399194d3e762b84cde3cd Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 20 Apr 2016 14:53:33 +0100 Subject: iommu/arm-smmu: Don't allocate resources for bypass domains Until we get fully plumbed into of_iommu_configure, our default IOMMU_DOMAIN_DMA domains just bypass translation. Since we achieve that by leaving the stream table entries set to bypass instead of pointing at a translation context, the context bank we allocate for the domain is completely wasted. Context banks are typically a rather limited resource, so don't hog ones we don't need. Reported-by: Eric Auger Tested-by: Eric Auger Signed-off-by: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 5158feb..7c39ac4 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -826,6 +826,12 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain, if (smmu_domain->smmu) goto out_unlock; + /* We're bypassing these SIDs, so don't allocate an actual context */ + if (domain->type == IOMMU_DOMAIN_DMA) { + smmu_domain->smmu = smmu; + goto out_unlock; + } + /* * Mapping the requested stage onto what we support is surprisingly * complicated, mainly because the spec allows S1+S2 SMMUs without @@ -948,7 +954,7 @@ static void arm_smmu_destroy_domain_context(struct iommu_domain *domain) void __iomem *cb_base; int irq; - if (!smmu) + if (!smmu || domain->type == IOMMU_DOMAIN_DMA) return; /* -- cgit v0.10.2 From 67f3754b51f22b18c4820fb84062f658c30e8644 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 21 Apr 2016 17:37:54 +0200 Subject: ALSA: pcxhr: Fix missing mutex unlock The commit [9bef72bdb26e: ALSA: pcxhr: Use nonatomic PCM ops] converted to non-atomic PCM ops, but shamelessly with an unbalanced mutex locking, which leads to the hangup easily. Fix it. Fixes: 9bef72bdb26e ('ALSA: pcxhr: Use nonatomic PCM ops') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116441 Cc: # 3.18+ Signed-off-by: Takashi Iwai diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c index c5194f5..d7e71f3 100644 --- a/sound/pci/pcxhr/pcxhr_core.c +++ b/sound/pci/pcxhr/pcxhr_core.c @@ -1341,5 +1341,6 @@ irqreturn_t pcxhr_threaded_irq(int irq, void *dev_id) } pcxhr_msg_thread(mgr); + mutex_unlock(&mgr->lock); return IRQ_HANDLED; } -- cgit v0.10.2 From 3194ed497939c6448005542e3ca4fa2386968fa0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 21 Apr 2016 17:49:11 +0200 Subject: ALSA: hda - Fix possible race on regmap bypass flip HD-audio driver uses regmap cache bypass feature for reading a raw value without the cache. But this is racy since both the cached and the uncached reads may occur concurrently. The former is done via the normal control API access while the latter comes from the proc file read. Even though the regmap itself has the protection against the concurrent accesses, the flag set/reset is done without the protection, so it may lead to inconsistent state of bypass flag that doesn't match with the current read and occasionally result in a kernel WARNING like: WARNING: CPU: 3 PID: 2731 at drivers/base/regmap/regcache.c:499 regcache_cache_only+0x78/0x93 One way to work around such a problem is to wrap with a mutex. But in this case, the solution is simpler: for the uncached read, we just skip the regmap and directly calls its accessor. The verb execution there is protected by itself, so basically it's safe to call individually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171 Signed-off-by: Takashi Iwai diff --git a/include/sound/hda_regmap.h b/include/sound/hda_regmap.h index 2767c55..ca64f0f 100644 --- a/include/sound/hda_regmap.h +++ b/include/sound/hda_regmap.h @@ -17,6 +17,8 @@ int snd_hdac_regmap_add_vendor_verb(struct hdac_device *codec, unsigned int verb); int snd_hdac_regmap_read_raw(struct hdac_device *codec, unsigned int reg, unsigned int *val); +int snd_hdac_regmap_read_raw_uncached(struct hdac_device *codec, + unsigned int reg, unsigned int *val); int snd_hdac_regmap_write_raw(struct hdac_device *codec, unsigned int reg, unsigned int val); int snd_hdac_regmap_update_raw(struct hdac_device *codec, unsigned int reg, diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c index d1a4d69..03c9872 100644 --- a/sound/hda/hdac_device.c +++ b/sound/hda/hdac_device.c @@ -299,13 +299,11 @@ EXPORT_SYMBOL_GPL(_snd_hdac_read_parm); int snd_hdac_read_parm_uncached(struct hdac_device *codec, hda_nid_t nid, int parm) { - int val; + unsigned int cmd, val; - if (codec->regmap) - regcache_cache_bypass(codec->regmap, true); - val = snd_hdac_read_parm(codec, nid, parm); - if (codec->regmap) - regcache_cache_bypass(codec->regmap, false); + cmd = snd_hdac_regmap_encode_verb(nid, AC_VERB_PARAMETERS) | parm; + if (snd_hdac_regmap_read_raw_uncached(codec, cmd, &val) < 0) + return -1; return val; } EXPORT_SYMBOL_GPL(snd_hdac_read_parm_uncached); diff --git a/sound/hda/hdac_regmap.c b/sound/hda/hdac_regmap.c index bdbcd6b..87041dd 100644 --- a/sound/hda/hdac_regmap.c +++ b/sound/hda/hdac_regmap.c @@ -453,14 +453,30 @@ int snd_hdac_regmap_write_raw(struct hdac_device *codec, unsigned int reg, EXPORT_SYMBOL_GPL(snd_hdac_regmap_write_raw); static int reg_raw_read(struct hdac_device *codec, unsigned int reg, - unsigned int *val) + unsigned int *val, bool uncached) { - if (!codec->regmap) + if (uncached || !codec->regmap) return hda_reg_read(codec, reg, val); else return regmap_read(codec->regmap, reg, val); } +static int __snd_hdac_regmap_read_raw(struct hdac_device *codec, + unsigned int reg, unsigned int *val, + bool uncached) +{ + int err; + + err = reg_raw_read(codec, reg, val, uncached); + if (err == -EAGAIN) { + err = snd_hdac_power_up_pm(codec); + if (!err) + err = reg_raw_read(codec, reg, val, uncached); + snd_hdac_power_down_pm(codec); + } + return err; +} + /** * snd_hdac_regmap_read_raw - read a pseudo register with power mgmt * @codec: the codec object @@ -472,19 +488,19 @@ static int reg_raw_read(struct hdac_device *codec, unsigned int reg, int snd_hdac_regmap_read_raw(struct hdac_device *codec, unsigned int reg, unsigned int *val) { - int err; - - err = reg_raw_read(codec, reg, val); - if (err == -EAGAIN) { - err = snd_hdac_power_up_pm(codec); - if (!err) - err = reg_raw_read(codec, reg, val); - snd_hdac_power_down_pm(codec); - } - return err; + return __snd_hdac_regmap_read_raw(codec, reg, val, false); } EXPORT_SYMBOL_GPL(snd_hdac_regmap_read_raw); +/* Works like snd_hdac_regmap_read_raw(), but this doesn't read from the + * cache but always via hda verbs. + */ +int snd_hdac_regmap_read_raw_uncached(struct hdac_device *codec, + unsigned int reg, unsigned int *val) +{ + return __snd_hdac_regmap_read_raw(codec, reg, val, true); +} + /** * snd_hdac_regmap_update_raw - update a pseudo register with power mgmt * @codec: the codec object -- cgit v0.10.2 From 882416c1e4d1c9d4c7b50e0f5c3fa9ef043cd710 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 18 Apr 2016 18:57:26 +0100 Subject: arm64: Fix EL1/EL2 early init inconsistencies with VHE When using the Virtualisation Host Extensions, EL1 is not used in the host and requires no separate configuration. In addition, with VHE enabled, non-hyp-specific EL2 configuration that does not need to be done early will be done anyway in __cpu_setup via the _EL1 system register aliases. In particular, the layout and definition of CPTR_EL2 are changed by enabling VHE so that they resemble CPACR_EL1, so existing code to initialise CPTR_EL2 becomes architecturally wrong in this case. This patch simply skips the affected initialisation code in the non-VHE case. Signed-off-by: Dave Martin Reviewed-by: Marc Zyngier Signed-off-by: Catalin Marinas diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 80a709a..85da0f5 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -588,6 +588,15 @@ set_hcr: msr vpidr_el2, x0 msr vmpidr_el2, x1 + /* + * When VHE is not in use, early init of EL2 and EL1 needs to be + * done here. + * When VHE _is_ in use, EL1 will not be used in the host and + * requires no configuration, and all non-hyp-specific EL2 setup + * will be done via the _EL1 system register aliases in __cpu_setup. + */ + cbnz x2, 1f + /* sctlr_el1 */ mov x0, #0x0800 // Set/clear RES{1,0} bits CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems @@ -597,6 +606,7 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems /* Coprocessor traps. */ mov x0, #0x33ff msr cptr_el2, x0 // Disable copro. traps to EL2 +1: #ifdef CONFIG_COMPAT msr hstr_el2, xzr // Disable CP15 traps to EL2 -- cgit v0.10.2 From 49e261a8a21e0960a3f7ff187a453ba1c1149053 Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Mon, 18 Apr 2016 14:51:47 -0700 Subject: openvswitch: Orphan skbs before IPv6 defrag This is the IPv6 counterpart to commit 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()"). Prior to commit 029f7f3b8701 ("netfilter: ipv6: nf_defrag: avoid/free clone operations"), ipv6 fragments sent to nf_ct_frag6_gather() would be cloned (implicitly orphaning) prior to queueing for reassembly. As such, when the IPv6 message is eventually reassembled, the skb->sk for all fragments would be NULL. After that commit was introduced, rather than cloning, the original skbs were queued directly without orphaning. The end result is that all frags except for the first and last may have a socket attached. This commit explicitly orphans such skbs during nf_ct_frag6_gather() to prevent BUG_ON(skb->sk) during a later call to ip6_fragment(). kernel BUG at net/ipv6/ip6_output.c:631! [...] Call Trace: [] ? __lock_acquire+0x927/0x20a0 [] ? do_output.isra.28+0x1b0/0x1b0 [openvswitch] [] ? __lock_is_held+0x52/0x70 [] ovs_fragment+0x1f7/0x280 [openvswitch] [] ? mark_held_locks+0x75/0xa0 [] ? _raw_spin_unlock_irqrestore+0x36/0x50 [] ? dst_discard_out+0x20/0x20 [] ? dst_ifdown+0x80/0x80 [] do_output.isra.28+0xf3/0x1b0 [openvswitch] [] do_execute_actions+0x709/0x12c0 [openvswitch] [] ? ovs_flow_stats_update+0x74/0x1e0 [openvswitch] [] ? ovs_flow_stats_update+0xa1/0x1e0 [openvswitch] [] ? _raw_spin_unlock+0x27/0x40 [] ovs_execute_actions+0x45/0x120 [openvswitch] [] ovs_dp_process_packet+0x85/0x150 [openvswitch] [] ? _raw_spin_unlock+0x27/0x40 [] ovs_execute_actions+0xc4/0x120 [openvswitch] [] ovs_dp_process_packet+0x85/0x150 [openvswitch] [] ? key_extract+0x442/0xc10 [openvswitch] [] ovs_vport_receive+0x5d/0xb0 [openvswitch] [] ? __lock_acquire+0x927/0x20a0 [] ? __lock_acquire+0x927/0x20a0 [] ? __lock_acquire+0x927/0x20a0 [] ? _raw_spin_unlock_irqrestore+0x36/0x50 [] internal_dev_xmit+0x6d/0x150 [openvswitch] [] ? internal_dev_xmit+0x5/0x150 [openvswitch] [] dev_hard_start_xmit+0x2df/0x660 [] ? validate_xmit_skb.isra.105.part.106+0x1a/0x2b0 [] __dev_queue_xmit+0x8f5/0x950 [] ? __dev_queue_xmit+0x50/0x950 [] ? mark_held_locks+0x75/0xa0 [] dev_queue_xmit+0x10/0x20 [] neigh_resolve_output+0x178/0x220 [] ? ip6_finish_output2+0x219/0x7b0 [] ip6_finish_output2+0x219/0x7b0 [] ? ip6_finish_output2+0x65/0x7b0 [] ? ip_idents_reserve+0x6b/0x80 [] ? ip6_fragment+0x93f/0xc50 [] ip6_fragment+0xba1/0xc50 [] ? ip6_flush_pending_frames+0x40/0x40 [] ip6_finish_output+0xcb/0x1d0 [] ip6_output+0x5f/0x1a0 [] ? ip6_fragment+0xc50/0xc50 [] ip6_local_out+0x3d/0x80 [] ip6_send_skb+0x2f/0xc0 [] ip6_push_pending_frames+0x4d/0x50 [] icmpv6_push_pending_frames+0xac/0xe0 [] icmpv6_echo_reply+0x42e/0x500 [] icmpv6_rcv+0x4cf/0x580 [] ip6_input_finish+0x1a7/0x690 [] ? ip6_input_finish+0x5/0x690 [] ip6_input+0x30/0xa0 [] ? ip6_rcv_finish+0x1a0/0x1a0 [] ip6_rcv_finish+0x4e/0x1a0 [] ipv6_rcv+0x45f/0x7c0 [] ? ipv6_rcv+0x36/0x7c0 [] ? ip6_make_skb+0x1c0/0x1c0 [] __netif_receive_skb_core+0x229/0xb80 [] ? mark_held_locks+0x75/0xa0 [] ? process_backlog+0x6f/0x230 [] __netif_receive_skb+0x16/0x70 [] process_backlog+0x78/0x230 [] ? process_backlog+0xdd/0x230 [] net_rx_action+0x203/0x480 [] ? mark_held_locks+0x75/0xa0 [] __do_softirq+0xde/0x49f [] ? ip6_finish_output2+0x228/0x7b0 [] do_softirq_own_stack+0x1c/0x30 [] do_softirq.part.18+0x3b/0x40 [] __local_bh_enable_ip+0xb6/0xc0 [] ip6_finish_output2+0x251/0x7b0 [] ? ip6_fragment+0xba1/0xc50 [] ? ip_idents_reserve+0x6b/0x80 [] ? ip6_fragment+0x93f/0xc50 [] ip6_fragment+0xba1/0xc50 [] ? ip6_flush_pending_frames+0x40/0x40 [] ip6_finish_output+0xcb/0x1d0 [] ip6_output+0x5f/0x1a0 [] ? ip6_fragment+0xc50/0xc50 [] ip6_local_out+0x3d/0x80 [] ip6_send_skb+0x2f/0xc0 [] ip6_push_pending_frames+0x4d/0x50 [] rawv6_sendmsg+0xa28/0xe30 [] ? inet_sendmsg+0xc7/0x1d0 [] inet_sendmsg+0x106/0x1d0 [] ? inet_sendmsg+0x5/0x1d0 [] sock_sendmsg+0x38/0x50 [] SYSC_sendto+0xf6/0x170 [] ? trace_hardirqs_on_thunk+0x1b/0x1d [] SyS_sendto+0xe/0x10 [] entry_SYSCALL_64_fastpath+0x18/0xa8 Code: 06 48 83 3f 00 75 26 48 8b 87 d8 00 00 00 2b 87 d0 00 00 00 48 39 d0 72 14 8b 87 e4 00 00 00 83 f8 01 75 09 48 83 7f 18 00 74 9a <0f> 0b 41 8b 86 cc 00 00 00 49 8# RIP [] ip6_fragment+0x73a/0xc50 RSP Fixes: 029f7f3b8701 ("netfilter: ipv6: nf_defrag: avoid/free clone operations") Reported-by: Daniele Di Proietto Signed-off-by: Joe Stringer Signed-off-by: David S. Miller diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index 1b9d286..b5fea110 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -367,6 +367,7 @@ static int handle_fragments(struct net *net, struct sw_flow_key *key, } else if (key->eth.type == htons(ETH_P_IPV6)) { enum ip6_defrag_users user = IP6_DEFRAG_CONNTRACK_IN + zone; + skb_orphan(skb); memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm)); err = nf_ct_frag6_gather(net, skb, user); if (err) -- cgit v0.10.2 From 479f85c36688f5c855ad463b71902ef5992628b7 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Mon, 18 Apr 2016 15:39:53 -0700 Subject: tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks Assuming SOF_TIMESTAMPING_TX_ACK is on. When dup acks are received, it could incorrectly think that a skb has already been acked and queue a SCM_TSTAMP_ACK cmsg to the sk->sk_error_queue. In tcp_ack_tstamp(), it checks 'between(shinfo->tskey, prior_snd_una, tcp_sk(sk)->snd_una - 1)'. If prior_snd_una == tcp_sk(sk)->snd_una like the following packetdrill script, between() returns true but the tskey is actually not acked. e.g. try between(3, 2, 1). The fix is to replace between() with one before() and one !before(). By doing this, the -1 offset on the tcp_sk(sk)->snd_una can also be removed. A packetdrill script is used to reproduce the dup ack scenario. Due to the lacking cmsg support in packetdrill (may be I cannot find it), a BPF prog is used to kprobe to sock_queue_err_skb() and print out the value of serr->ee.ee_data. Both the packetdrill and the bcc BPF script is attached at the end of this commit message. BPF Output Before Fix: ~~~~~~ <...>-2056 [001] d.s. 433.927987: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.929563: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.930765: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 434.028177: : ee_data:1459 packetdrill-2056 [001] d.s. 434.029686: : ee_data:14599 BPF Output After Fix: ~~~~~~ <...>-2049 [000] d.s. 113.517039: : ee_data:1459 <...>-2049 [000] d.s. 113.517253: : ee_data:14599 BCC BPF Script: ~~~~~~ #!/usr/bin/env python from __future__ import print_function from bcc import BPF bpf_text = """ #include #include #include #include #ifdef memset #undef memset #endif int trace_err_skb(struct pt_regs *ctx) { struct sk_buff *skb = (struct sk_buff *)ctx->si; struct sock *sk = (struct sock *)ctx->di; struct sock_exterr_skb *serr; u32 ee_data = 0; if (!sk || !skb) return 0; serr = SKB_EXT_ERR(skb); bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data); bpf_trace_printk("ee_data:%u\\n", ee_data); return 0; }; """ b = BPF(text=bpf_text) b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb") print("Attached to kprobe") b.trace_print() Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 0.100 > S. 0:0(0) ack 1 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 1460) = 1460 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 0.300 < . 1:1(0) ack 1 win 257 0.300 < . 1:1(0) ack 1 win 257 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau Cc: Eric Dumazet Cc: Neal Cardwell Cc: Soheil Hassas Yeganeh Cc: Willem de Bruijn Cc: Yuchung Cheng Acked-by: Soheil Hassas Yeganeh Tested-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index e6e65f7..0edb071 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3098,7 +3098,8 @@ static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb, shinfo = skb_shinfo(skb); if ((shinfo->tx_flags & SKBTX_ACK_TSTAMP) && - between(shinfo->tskey, prior_snd_una, tcp_sk(sk)->snd_una - 1)) + !before(shinfo->tskey, prior_snd_una) && + before(shinfo->tskey, tcp_sk(sk)->snd_una)) __skb_tstamp_tx(skb, NULL, sk, SCM_TSTAMP_ACK); } -- cgit v0.10.2 From 3fa88c51c73a67e7eeda1fcafd809f9185790b31 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Tue, 19 Apr 2016 21:09:49 +0300 Subject: drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open The cpsw_ndo_open() could try to access CPSW registers before calling pm_runtime_get_sync(). This will trigger L3 error: WARNING: CPU: 0 PID: 21 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c() 44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_FAST (Idle): Data Access in Supervisor mode during Functional access and CPSW will stop functioning. Hence, fix it by moving pm_runtime_get_sync() before the first access to CPSW registers in cpsw_ndo_open(). Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 42fdfd4..bbb77cd 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1251,12 +1251,12 @@ static int cpsw_ndo_open(struct net_device *ndev) int i, ret; u32 reg; + pm_runtime_get_sync(&priv->pdev->dev); + if (!cpsw_common_res_usage_state(priv)) cpsw_intr_disable(priv); netif_carrier_off(ndev); - pm_runtime_get_sync(&priv->pdev->dev); - reg = priv->version; dev_info(priv->dev, "initializing cpsw version %d.%d (%d)\n", -- cgit v0.10.2 From 082ac2d51d9f19ec1c29bdaaaf7fb49889e4fade Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 19 Apr 2016 22:39:28 -0700 Subject: tcp: Merge tx_flags and tskey in tcp_collapse_retrans If two skbs are merged/collapsed during retransmission, the current logic does not merge the tx_flags and tskey. The end result is the SCM_TSTAMP_ACK timestamp could be missing for a packet. The patch: 1. Merge the tx_flags 2. Overwrite the prev_skb's tskey with the next_skb's tskey BPF Output Before: ~~~~~~ BPF Output After: ~~~~~~ packetdrill-2092 [001] d.s. 453.998486: : ee_data:1459 Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 0.100 > S. 0:0(0) ack 1 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 730) = 730 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 730) = 730 +0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0 0.200 write(4, ..., 11680) = 11680 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 > P. 1:731(730) ack 1 0.200 > P. 731:1461(730) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:13141(4380) ack 1 0.300 < . 1:1(0) ack 1 win 257 0.300 < . 1:1(0) ack 1 win 257 0.300 < . 1:1(0) ack 1 win 257 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 13141 win 257 0.400 close(4) = 0 0.400 > F. 13141:13141(0) ack 1 0.500 < F. 1:1(0) ack 13142 win 257 0.500 > . 13142:13142(0) ack 2 Signed-off-by: Martin KaFai Lau Cc: Eric Dumazet Cc: Neal Cardwell Cc: Soheil Hassas Yeganeh Cc: Willem de Bruijn Cc: Yuchung Cheng Acked-by: Soheil Hassas Yeganeh Tested-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 7d2dc01..5bc3c30 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2441,6 +2441,20 @@ u32 __tcp_select_window(struct sock *sk) return window; } +static void tcp_skb_collapse_tstamp(struct sk_buff *skb, + const struct sk_buff *next_skb) +{ + const struct skb_shared_info *next_shinfo = skb_shinfo(next_skb); + u8 tsflags = next_shinfo->tx_flags & SKBTX_ANY_TSTAMP; + + if (unlikely(tsflags)) { + struct skb_shared_info *shinfo = skb_shinfo(skb); + + shinfo->tx_flags |= tsflags; + shinfo->tskey = next_shinfo->tskey; + } +} + /* Collapses two adjacent SKB's during retransmission. */ static void tcp_collapse_retrans(struct sock *sk, struct sk_buff *skb) { @@ -2484,6 +2498,8 @@ static void tcp_collapse_retrans(struct sock *sk, struct sk_buff *skb) tcp_adjust_pcount(sk, next_skb, tcp_skb_pcount(next_skb)); + tcp_skb_collapse_tstamp(skb, next_skb); + sk_wmem_free_skb(sk, next_skb); } -- cgit v0.10.2 From cfea5a688eb37bcd1081255df9f9f777f4e61999 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 19 Apr 2016 22:39:29 -0700 Subject: tcp: Merge tx_flags and tskey in tcp_shifted_skb After receiving sacks, tcp_shifted_skb() will collapse skbs if possible. tx_flags and tskey also have to be merged. This patch reuses the tcp_skb_collapse_tstamp() to handle them. BPF Output Before: ~~~~~ BPF Output After: ~~~~~ <...>-2024 [007] d.s. 88.644374: : ee_data:14599 Packetdrill Script: ~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 0.100 > S. 0:0(0) ack 1 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 1460) = 1460 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau Cc: Eric Dumazet Cc: Neal Cardwell Cc: Soheil Hassas Yeganeh Cc: Willem de Bruijn Cc: Yuchung Cheng Acked-by: Soheil Hassas Yeganeh Tested-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller diff --git a/include/net/tcp.h b/include/net/tcp.h index b91370f..6db1022 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -552,6 +552,8 @@ void tcp_send_ack(struct sock *sk); void tcp_send_delayed_ack(struct sock *sk); void tcp_send_loss_probe(struct sock *sk); bool tcp_schedule_loss_probe(struct sock *sk); +void tcp_skb_collapse_tstamp(struct sk_buff *skb, + const struct sk_buff *next_skb); /* tcp_input.c */ void tcp_resume_early_retransmit(struct sock *sk); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 0edb071..c124c3c 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1309,6 +1309,7 @@ static bool tcp_shifted_skb(struct sock *sk, struct sk_buff *skb, if (skb == tcp_highest_sack(sk)) tcp_advance_highest_sack(sk, skb); + tcp_skb_collapse_tstamp(prev, skb); tcp_unlink_write_queue(skb, sk); sk_wmem_free_skb(sk, skb); diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 5bc3c30..441ae9d 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2441,8 +2441,8 @@ u32 __tcp_select_window(struct sock *sk) return window; } -static void tcp_skb_collapse_tstamp(struct sk_buff *skb, - const struct sk_buff *next_skb) +void tcp_skb_collapse_tstamp(struct sk_buff *skb, + const struct sk_buff *next_skb) { const struct skb_shared_info *next_shinfo = skb_shinfo(next_skb); u8 tsflags = next_shinfo->tx_flags & SKBTX_ANY_TSTAMP; -- cgit v0.10.2 From f86af2dfded628034d05a2548e50001f34549403 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 20 Apr 2016 03:03:27 -0400 Subject: qede: Fix various memory allocation error flows for fastpath This patch handles memory allocation failures for fastpath gracefully in the driver. Signed-off-by: Manish Chopra Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 518af32..5cf1eb2 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -750,6 +750,12 @@ static bool qede_has_tx_work(struct qede_fastpath *fp) return false; } +static inline void qede_rx_bd_ring_consume(struct qede_rx_queue *rxq) +{ + qed_chain_consume(&rxq->rx_bd_ring); + rxq->sw_rx_cons++; +} + /* This function reuses the buffer(from an offset) from * consumer index to producer index in the bd ring */ @@ -773,6 +779,21 @@ static inline void qede_reuse_page(struct qede_dev *edev, curr_cons->data = NULL; } +/* In case of allocation failures reuse buffers + * from consumer index to produce buffers for firmware + */ +static void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, + struct qede_dev *edev, u8 count) +{ + struct sw_rx_data *curr_cons; + + for (; count > 0; count--) { + curr_cons = &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX]; + qede_reuse_page(edev, rxq, curr_cons); + qede_rx_bd_ring_consume(rxq); + } +} + static inline int qede_realloc_rx_buffer(struct qede_dev *edev, struct qede_rx_queue *rxq, struct sw_rx_data *curr_cons) @@ -781,8 +802,14 @@ static inline int qede_realloc_rx_buffer(struct qede_dev *edev, curr_cons->page_offset += rxq->rx_buf_seg_size; if (curr_cons->page_offset == PAGE_SIZE) { - if (unlikely(qede_alloc_rx_buffer(edev, rxq))) + if (unlikely(qede_alloc_rx_buffer(edev, rxq))) { + /* Since we failed to allocate new buffer + * current buffer can be used again. + */ + curr_cons->page_offset -= rxq->rx_buf_seg_size; + return -ENOMEM; + } dma_unmap_page(&edev->pdev->dev, curr_cons->mapping, PAGE_SIZE, DMA_FROM_DEVICE); @@ -901,7 +928,10 @@ static int qede_fill_frag_skb(struct qede_dev *edev, len_on_bd); if (unlikely(qede_realloc_rx_buffer(edev, rxq, current_bd))) { - tpa_info->agg_state = QEDE_AGG_STATE_ERROR; + /* Incr page ref count to reuse on allocation failure + * so that it doesn't get freed while freeing SKB. + */ + atomic_inc(¤t_bd->data->_count); goto out; } @@ -915,6 +945,8 @@ static int qede_fill_frag_skb(struct qede_dev *edev, return 0; out: + tpa_info->agg_state = QEDE_AGG_STATE_ERROR; + qede_recycle_rx_bd_ring(rxq, edev, 1); return -ENOMEM; } @@ -966,8 +998,9 @@ static void qede_tpa_start(struct qede_dev *edev, tpa_info->skb = netdev_alloc_skb(edev->ndev, le16_to_cpu(cqe->len_on_first_bd)); if (unlikely(!tpa_info->skb)) { + DP_NOTICE(edev, "Failed to allocate SKB for gro\n"); tpa_info->agg_state = QEDE_AGG_STATE_ERROR; - return; + goto cons_buf; } skb_put(tpa_info->skb, le16_to_cpu(cqe->len_on_first_bd)); @@ -990,6 +1023,7 @@ static void qede_tpa_start(struct qede_dev *edev, /* This is needed in order to enable forwarding support */ qede_set_gro_params(edev, tpa_info->skb, cqe); +cons_buf: /* We still need to handle bd_len_list to consume buffers */ if (likely(cqe->ext_bd_len_list[0])) qede_fill_frag_skb(edev, rxq, cqe->tpa_agg_index, le16_to_cpu(cqe->ext_bd_len_list[0])); @@ -1244,17 +1278,17 @@ static int qede_rx_int(struct qede_fastpath *fp, int budget) "CQE in CONS = %u has error, flags = %x, dropping incoming packet\n", sw_comp_cons, parse_flag); rxq->rx_hw_errors++; - qede_reuse_page(edev, rxq, sw_rx_data); - goto next_rx; + qede_recycle_rx_bd_ring(rxq, edev, fp_cqe->bd_num); + goto next_cqe; } skb = netdev_alloc_skb(edev->ndev, QEDE_RX_HDR_SIZE); if (unlikely(!skb)) { DP_NOTICE(edev, "Build_skb failed, dropping incoming packet\n"); - qede_reuse_page(edev, rxq, sw_rx_data); + qede_recycle_rx_bd_ring(rxq, edev, fp_cqe->bd_num); rxq->rx_alloc_errors++; - goto next_rx; + goto next_cqe; } /* Copy data into SKB */ @@ -1288,11 +1322,22 @@ static int qede_rx_int(struct qede_fastpath *fp, int budget) if (unlikely(qede_realloc_rx_buffer(edev, rxq, sw_rx_data))) { DP_ERR(edev, "Failed to allocate rx buffer\n"); + /* Incr page ref count to reuse on allocation + * failure so that it doesn't get freed while + * freeing SKB. + */ + + atomic_inc(&sw_rx_data->data->_count); rxq->rx_alloc_errors++; + qede_recycle_rx_bd_ring(rxq, edev, + fp_cqe->bd_num); + dev_kfree_skb_any(skb); goto next_cqe; } } + qede_rx_bd_ring_consume(rxq); + if (fp_cqe->bd_num != 1) { u16 pkt_len = le16_to_cpu(fp_cqe->pkt_len); u8 num_frags; @@ -1303,18 +1348,27 @@ static int qede_rx_int(struct qede_fastpath *fp, int budget) num_frags--) { u16 cur_size = pkt_len > rxq->rx_buf_size ? rxq->rx_buf_size : pkt_len; + if (unlikely(!cur_size)) { + DP_ERR(edev, + "Still got %d BDs for mapping jumbo, but length became 0\n", + num_frags); + qede_recycle_rx_bd_ring(rxq, edev, + num_frags); + dev_kfree_skb_any(skb); + goto next_cqe; + } - WARN_ONCE(!cur_size, - "Still got %d BDs for mapping jumbo, but length became 0\n", - num_frags); - - if (unlikely(qede_alloc_rx_buffer(edev, rxq))) + if (unlikely(qede_alloc_rx_buffer(edev, rxq))) { + qede_recycle_rx_bd_ring(rxq, edev, + num_frags); + dev_kfree_skb_any(skb); goto next_cqe; + } - rxq->sw_rx_cons++; sw_rx_index = rxq->sw_rx_cons & NUM_RX_BDS_MAX; sw_rx_data = &rxq->sw_rx_ring[sw_rx_index]; - qed_chain_consume(&rxq->rx_bd_ring); + qede_rx_bd_ring_consume(rxq); + dma_unmap_page(&edev->pdev->dev, sw_rx_data->mapping, PAGE_SIZE, DMA_FROM_DEVICE); @@ -1330,7 +1384,7 @@ static int qede_rx_int(struct qede_fastpath *fp, int budget) pkt_len -= cur_size; } - if (pkt_len) + if (unlikely(pkt_len)) DP_ERR(edev, "Mapped all BDs of jumbo, but still have %d bytes\n", pkt_len); @@ -1349,10 +1403,6 @@ static int qede_rx_int(struct qede_fastpath *fp, int budget) skb_record_rx_queue(skb, fp->rss_id); qede_skb_receive(edev, fp, skb, le16_to_cpu(fp_cqe->vlan_tag)); - - qed_chain_consume(&rxq->rx_bd_ring); -next_rx: - rxq->sw_rx_cons++; next_rx_only: rx_pkt++; @@ -2257,7 +2307,7 @@ static void qede_free_sge_mem(struct qede_dev *edev, struct qede_agg_info *tpa_info = &rxq->tpa_info[i]; struct sw_rx_data *replace_buf = &tpa_info->replace_buf; - if (replace_buf) { + if (replace_buf->data) { dma_unmap_page(&edev->pdev->dev, dma_unmap_addr(replace_buf, mapping), PAGE_SIZE, DMA_FROM_DEVICE); @@ -2377,7 +2427,7 @@ err: static int qede_alloc_mem_rxq(struct qede_dev *edev, struct qede_rx_queue *rxq) { - int i, rc, size, num_allocated; + int i, rc, size; rxq->num_rx_buffers = edev->q_num_rx_buffers; @@ -2394,6 +2444,7 @@ static int qede_alloc_mem_rxq(struct qede_dev *edev, rxq->sw_rx_ring = kzalloc(size, GFP_KERNEL); if (!rxq->sw_rx_ring) { DP_ERR(edev, "Rx buffers ring allocation failed\n"); + rc = -ENOMEM; goto err; } @@ -2421,26 +2472,16 @@ static int qede_alloc_mem_rxq(struct qede_dev *edev, /* Allocate buffers for the Rx ring */ for (i = 0; i < rxq->num_rx_buffers; i++) { rc = qede_alloc_rx_buffer(edev, rxq); - if (rc) - break; - } - num_allocated = i; - if (!num_allocated) { - DP_ERR(edev, "Rx buffers allocation failed\n"); - goto err; - } else if (num_allocated < rxq->num_rx_buffers) { - DP_NOTICE(edev, - "Allocated less buffers than desired (%d allocated)\n", - num_allocated); + if (rc) { + DP_ERR(edev, + "Rx buffers allocation failed at index %d\n", i); + goto err; + } } - qede_alloc_sge_mem(edev, rxq); - - return 0; - + rc = qede_alloc_sge_mem(edev, rxq); err: - qede_free_mem_rxq(edev, rxq); - return -ENOMEM; + return rc; } static void qede_free_mem_txq(struct qede_dev *edev, @@ -2523,10 +2564,8 @@ static int qede_alloc_mem_fp(struct qede_dev *edev, } return 0; - err: - qede_free_mem_fp(edev, fp); - return -ENOMEM; + return rc; } static void qede_free_mem_load(struct qede_dev *edev) @@ -2549,22 +2588,13 @@ static int qede_alloc_mem_load(struct qede_dev *edev) struct qede_fastpath *fp = &edev->fp_array[rss_id]; rc = qede_alloc_mem_fp(edev, fp); - if (rc) - break; - } - - if (rss_id != QEDE_RSS_CNT(edev)) { - /* Failed allocating memory for all the queues */ - if (!rss_id) { + if (rc) { DP_ERR(edev, - "Failed to allocate memory for the leading queue\n"); - rc = -ENOMEM; - } else { - DP_NOTICE(edev, - "Failed to allocate memory for all of RSS queues\n Desired: %d queues, allocated: %d queues\n", - QEDE_RSS_CNT(edev), rss_id); + "Failed to allocate memory for fastpath - rss id = %d\n", + rss_id); + qede_free_mem_load(edev); + return rc; } - edev->num_rss = rss_id; } return 0; -- cgit v0.10.2 From aad94c0408780c9f2e168f91ded861dd3877f7d9 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 20 Apr 2016 03:03:28 -0400 Subject: qede: Fix setting Skb network header Skb's network header needs to be set before extracting IPv4/IPv6 headers from it. Signed-off-by: Manish Chopra Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 5cf1eb2..bf0fb99 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1041,7 +1041,6 @@ static void qede_gro_ip_csum(struct sk_buff *skb) const struct iphdr *iph = ip_hdr(skb); struct tcphdr *th; - skb_set_network_header(skb, 0); skb_set_transport_header(skb, sizeof(struct iphdr)); th = tcp_hdr(skb); @@ -1056,7 +1055,6 @@ static void qede_gro_ipv6_csum(struct sk_buff *skb) struct ipv6hdr *iph = ipv6_hdr(skb); struct tcphdr *th; - skb_set_network_header(skb, 0); skb_set_transport_header(skb, sizeof(struct ipv6hdr)); th = tcp_hdr(skb); @@ -1073,6 +1071,8 @@ static void qede_gro_receive(struct qede_dev *edev, { #ifdef CONFIG_INET if (skb_shinfo(skb)->gso_size) { + skb_set_network_header(skb, 0); + switch (skb->protocol) { case htons(ETH_P_IP): qede_gro_ip_csum(skb); -- cgit v0.10.2 From ee2fa8e6b317ef756a3dfc2dae35891c025e32c9 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 20 Apr 2016 03:03:29 -0400 Subject: qede: Fix single MTU sized packet from firmware GRO flow In firmware assisted GRO flow there could be a single MTU sized segment arriving due to firmware aggregation timeout/last segment in an aggregation flow, which is not expected to be an actual gro packet. So If a skb has zero frags from the GRO flow then simply push it in the stack as non gso skb. Signed-off-by: Manish Chopra Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index bf0fb99..7869465 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1069,6 +1069,17 @@ static void qede_gro_receive(struct qede_dev *edev, struct sk_buff *skb, u16 vlan_tag) { + /* FW can send a single MTU sized packet from gro flow + * due to aggregation timeout/last segment etc. which + * is not expected to be a gro packet. If a skb has zero + * frags then simply push it in the stack as non gso skb. + */ + if (unlikely(!skb->data_len)) { + skb_shinfo(skb)->gso_type = 0; + skb_shinfo(skb)->gso_size = 0; + goto send_skb; + } + #ifdef CONFIG_INET if (skb_shinfo(skb)->gso_size) { skb_set_network_header(skb, 0); @@ -1087,6 +1098,8 @@ static void qede_gro_receive(struct qede_dev *edev, } } #endif + +send_skb: skb_record_rx_queue(skb, fp->rss_id); qede_skb_receive(edev, fp, skb, vlan_tag); } -- cgit v0.10.2 From 99164f9e62a391b5f4b7923b624d182b5d2859e0 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 20 Apr 2016 10:56:13 +0200 Subject: net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enable In order to avoid an Unbalanced pm_runtime_enable in the DaVinci emac driver when the device is removed and re-probed, and a pm_runtime_disable() call in davinci_emac_remove(). Actually, using unbind/bind on a TI DM8168 SoC gives : $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/unbind net eth1: DaVinci EMAC: davinci_emac_remove() $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/bind davinci_emac 4a120000.ethernet: Unbalanced pm_runtime_enable Cc: Brian Hutchinson Fixes: 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support") Signed-off-by: Neil Armstrong Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 5d9abed..e9fe3fb 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -2101,6 +2101,7 @@ static int davinci_emac_remove(struct platform_device *pdev) cpdma_ctlr_destroy(priv->dma); unregister_netdev(ndev); + pm_runtime_disable(&pdev->dev); free_netdev(ndev); return 0; -- cgit v0.10.2 From 210990b05a1247886539078e857cd038881bb2d6 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 20 Apr 2016 10:56:45 +0200 Subject: net: ethernet: davinci_emac: Fix platform_data overwrite When the DaVinci emac driver is removed and re-probed, the actual pdev->dev.platform_data is populated with an unwanted valid pointer saved by the previous davinci_emac_of_get_pdata() call, causing a kernel crash when calling priv->int_disable() in emac_int_disable(). Unable to handle kernel paging request at virtual address c8622a80 ... [] (emac_int_disable) from [] (emac_dev_open+0x290/0x5f8) [] (emac_dev_open) from [] (__dev_open+0xb8/0x120) [] (__dev_open) from [] (__dev_change_flags+0x88/0x14c) [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48) [] (dev_change_flags) from [] (devinet_ioctl+0x6b4/0x7ac) [] (devinet_ioctl) from [] (sock_ioctl+0x1d8/0x2c0) [] (sock_ioctl) from [] (do_vfs_ioctl+0x41c/0x600) [] (do_vfs_ioctl) from [] (SyS_ioctl+0x6c/0x7c) [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x1c) Fixes: 42f59967a091 ("net: ethernet: davinci_emac: add OF support") Cc: Brian Hutchinson Signed-off-by: Neil Armstrong Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index e9fe3fb..58d58f0 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1878,8 +1878,6 @@ davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv) pdata->hw_ram_addr = auxdata->hw_ram_addr; } - pdev->dev.platform_data = pdata; - return pdata; } -- cgit v0.10.2 From a1459c1c9ebcd72f3d488fd10673e64b2bfcbd27 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 20 Apr 2016 12:54:05 +0100 Subject: net: phy: spi_ks8895: Don't leak references to SPI devices The ks8895 driver is using spi_dev_get() apparently just to take a copy of the SPI device used to instantiate it but never calls spi_dev_put() to free it. Since the device is guaranteed to exist between probe() and remove() there should be no need for the driver to take an extra reference to it so fix the leak by just using a straight assignment. Signed-off-by: Mark Brown Signed-off-by: David S. Miller diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c index b5d50d4..93ffedf 100644 --- a/drivers/net/phy/spi_ks8995.c +++ b/drivers/net/phy/spi_ks8995.c @@ -441,7 +441,7 @@ static int ks8995_probe(struct spi_device *spi) return -ENOMEM; mutex_init(&ks->lock); - ks->spi = spi_dev_get(spi); + ks->spi = spi; ks->chip = &ks8995_chip[variant]; if (ks->spi->dev.of_node) { -- cgit v0.10.2 From c12833acff62cff83a8b728253e7ebbc1264d75e Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Wed, 20 Apr 2016 16:01:15 +0300 Subject: net/mlx4_core: Implement pci_resume callback Move resume related activities to a new pci_resume function instead of performing them in mlx4_pci_slot_reset. This change is needed to avoid a hotplug during EEH recovery due to commit f2da4ccf8bd4 ("powerpc/eeh: More relaxed hotplug criterion"). Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 358f723..5d45aa3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -4050,45 +4050,53 @@ static pci_ers_result_t mlx4_pci_slot_reset(struct pci_dev *pdev) { struct mlx4_dev_persistent *persist = pci_get_drvdata(pdev); struct mlx4_dev *dev = persist->dev; - struct mlx4_priv *priv = mlx4_priv(dev); - int ret; - int nvfs[MLX4_MAX_PORTS + 1] = {0, 0, 0}; - int total_vfs; + int err; mlx4_err(dev, "mlx4_pci_slot_reset was called\n"); - ret = pci_enable_device(pdev); - if (ret) { - mlx4_err(dev, "Can not re-enable device, ret=%d\n", ret); + err = pci_enable_device(pdev); + if (err) { + mlx4_err(dev, "Can not re-enable device, err=%d\n", err); return PCI_ERS_RESULT_DISCONNECT; } pci_set_master(pdev); pci_restore_state(pdev); pci_save_state(pdev); + return PCI_ERS_RESULT_RECOVERED; +} + +static void mlx4_pci_resume(struct pci_dev *pdev) +{ + struct mlx4_dev_persistent *persist = pci_get_drvdata(pdev); + struct mlx4_dev *dev = persist->dev; + struct mlx4_priv *priv = mlx4_priv(dev); + int nvfs[MLX4_MAX_PORTS + 1] = {0, 0, 0}; + int total_vfs; + int err; + mlx4_err(dev, "%s was called\n", __func__); total_vfs = dev->persist->num_vfs; memcpy(nvfs, dev->persist->nvfs, sizeof(dev->persist->nvfs)); mutex_lock(&persist->interface_state_mutex); if (!(persist->interface_state & MLX4_INTERFACE_STATE_UP)) { - ret = mlx4_load_one(pdev, priv->pci_dev_data, total_vfs, nvfs, + err = mlx4_load_one(pdev, priv->pci_dev_data, total_vfs, nvfs, priv, 1); - if (ret) { - mlx4_err(dev, "%s: mlx4_load_one failed, ret=%d\n", - __func__, ret); + if (err) { + mlx4_err(dev, "%s: mlx4_load_one failed, err=%d\n", + __func__, err); goto end; } - ret = restore_current_port_types(dev, dev->persist-> + err = restore_current_port_types(dev, dev->persist-> curr_port_type, dev->persist-> curr_port_poss_type); - if (ret) - mlx4_err(dev, "could not restore original port types (%d)\n", ret); + if (err) + mlx4_err(dev, "could not restore original port types (%d)\n", err); } end: mutex_unlock(&persist->interface_state_mutex); - return ret ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED; } static void mlx4_shutdown(struct pci_dev *pdev) @@ -4105,6 +4113,7 @@ static void mlx4_shutdown(struct pci_dev *pdev) static const struct pci_error_handlers mlx4_err_handler = { .error_detected = mlx4_pci_err_detected, .slot_reset = mlx4_pci_slot_reset, + .resume = mlx4_pci_resume, }; static struct pci_driver mlx4_driver = { -- cgit v0.10.2 From 4bfd2e6e53435a214888fd35e230157a38ffc6a0 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Wed, 20 Apr 2016 16:01:16 +0300 Subject: net/mlx4_core: Avoid repeated calls to pci enable/disable Maintain the PCI status and provide wrappers for enabling and disabling the PCI device. Performing the actions more than once without doing its opposite results in warning logs. This occurred when EEH hotplugged the device causing a warning for disabling an already disabled device. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 5d45aa3..12c77a7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -3172,6 +3172,34 @@ static int mlx4_check_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap return 0; } +static int mlx4_pci_enable_device(struct mlx4_dev *dev) +{ + struct pci_dev *pdev = dev->persist->pdev; + int err = 0; + + mutex_lock(&dev->persist->pci_status_mutex); + if (dev->persist->pci_status == MLX4_PCI_STATUS_DISABLED) { + err = pci_enable_device(pdev); + if (!err) + dev->persist->pci_status = MLX4_PCI_STATUS_ENABLED; + } + mutex_unlock(&dev->persist->pci_status_mutex); + + return err; +} + +static void mlx4_pci_disable_device(struct mlx4_dev *dev) +{ + struct pci_dev *pdev = dev->persist->pdev; + + mutex_lock(&dev->persist->pci_status_mutex); + if (dev->persist->pci_status == MLX4_PCI_STATUS_ENABLED) { + pci_disable_device(pdev); + dev->persist->pci_status = MLX4_PCI_STATUS_DISABLED; + } + mutex_unlock(&dev->persist->pci_status_mutex); +} + static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data, int total_vfs, int *nvfs, struct mlx4_priv *priv, int reset_flow) @@ -3582,7 +3610,7 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data, pr_info(DRV_NAME ": Initializing %s\n", pci_name(pdev)); - err = pci_enable_device(pdev); + err = mlx4_pci_enable_device(&priv->dev); if (err) { dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n"); return err; @@ -3715,7 +3743,7 @@ err_release_regions: pci_release_regions(pdev); err_disable_pdev: - pci_disable_device(pdev); + mlx4_pci_disable_device(&priv->dev); pci_set_drvdata(pdev, NULL); return err; } @@ -3775,6 +3803,7 @@ static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) priv->pci_dev_data = id->driver_data; mutex_init(&dev->persist->device_state_mutex); mutex_init(&dev->persist->interface_state_mutex); + mutex_init(&dev->persist->pci_status_mutex); ret = devlink_register(devlink, &pdev->dev); if (ret) @@ -3923,7 +3952,7 @@ static void mlx4_remove_one(struct pci_dev *pdev) } pci_release_regions(pdev); - pci_disable_device(pdev); + mlx4_pci_disable_device(dev); devlink_unregister(devlink); kfree(dev->persist); devlink_free(devlink); @@ -4042,7 +4071,7 @@ static pci_ers_result_t mlx4_pci_err_detected(struct pci_dev *pdev, if (state == pci_channel_io_perm_failure) return PCI_ERS_RESULT_DISCONNECT; - pci_disable_device(pdev); + mlx4_pci_disable_device(persist->dev); return PCI_ERS_RESULT_NEED_RESET; } @@ -4053,7 +4082,7 @@ static pci_ers_result_t mlx4_pci_slot_reset(struct pci_dev *pdev) int err; mlx4_err(dev, "mlx4_pci_slot_reset was called\n"); - err = pci_enable_device(pdev); + err = mlx4_pci_enable_device(dev); if (err) { mlx4_err(dev, "Can not re-enable device, err=%d\n", err); return PCI_ERS_RESULT_DISCONNECT; diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 8541a91..d1f904c 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -828,6 +828,11 @@ struct mlx4_vf_dev { u8 n_ports; }; +enum mlx4_pci_status { + MLX4_PCI_STATUS_DISABLED, + MLX4_PCI_STATUS_ENABLED, +}; + struct mlx4_dev_persistent { struct pci_dev *pdev; struct mlx4_dev *dev; @@ -841,6 +846,8 @@ struct mlx4_dev_persistent { u8 state; struct mutex interface_state_mutex; /* protect SW state */ u8 interface_state; + struct mutex pci_status_mutex; /* sync pci state */ + enum mlx4_pci_status pci_status; }; struct mlx4_dev { -- cgit v0.10.2 From 2a500090a4ea2ccd713f3c782a2fb27681bd6e67 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Wed, 20 Apr 2016 16:01:17 +0300 Subject: net/mlx4_core: Don't allow to VF change global pause settings Currently changing global pause settings is done via SET_PORT command with input modifier GENERAL. This command is allowed for each VF since MTU setting is done via the same command. Change the above to the following scheme: before passing the request to the FW, the PF will check whether it was issued by a slave. If yes, don't change global pause and warn, otherwise change to the requested value and store for further reference. Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index ef96831..c9d7fc51 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -586,6 +586,8 @@ struct mlx4_mfunc_master_ctx { struct mlx4_master_qp0_state qp0_state[MLX4_MAX_PORTS + 1]; int init_port_ref[MLX4_MAX_PORTS + 1]; u16 max_mtu[MLX4_MAX_PORTS + 1]; + u8 pptx; + u8 pprx; int disable_mcast_ref[MLX4_MAX_PORTS + 1]; struct mlx4_resource_tracker res_tracker; struct workqueue_struct *comm_wq; diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c index 211c650..087b23b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -1317,6 +1317,19 @@ static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod, } gen_context->mtu = cpu_to_be16(master->max_mtu[port]); + /* Slave cannot change Global Pause configuration */ + if (slave != mlx4_master_func_num(dev) && + ((gen_context->pptx != master->pptx) || + (gen_context->pprx != master->pprx))) { + gen_context->pptx = master->pptx; + gen_context->pprx = master->pprx; + mlx4_warn(dev, + "denying Global Pause change for slave:%d\n", + slave); + } else { + master->pptx = gen_context->pptx; + master->pprx = gen_context->pprx; + } break; case MLX4_SET_PORT_GID_TABLE: /* change to MULTIPLE entries: number of guest's gids -- cgit v0.10.2 From d21ed3a311a1031dddc78e9270d1aa9adc8f8a93 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Wed, 20 Apr 2016 16:01:18 +0300 Subject: net/mlx4_en: Split SW RX dropped counter per RX ring Count SW packet drops per RX ring instead of a global counter. This will allow monitoring the number of rx drops per ring. In addition, SW rx_dropped counter was overwritten by HW rx_dropped counter, sum both of them instead to show the accurate value. Fixes: a3333b35da16 ('net/mlx4_en: Moderate ethtool callback to [...] ') Signed-off-by: Eran Ben Elisha Reported-by: Brenden Blanco Signed-off-by: Saeed Mahameed Signed-off-by: Or Gerlitz Reported-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index f69584a..c761194 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -337,7 +337,7 @@ static int mlx4_en_get_sset_count(struct net_device *dev, int sset) case ETH_SS_STATS: return bitmap_iterator_count(&it) + (priv->tx_ring_num * 2) + - (priv->rx_ring_num * 2); + (priv->rx_ring_num * 3); case ETH_SS_TEST: return MLX4_EN_NUM_SELF_TEST - !(priv->mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_UC_LOOPBACK) * 2; @@ -404,6 +404,7 @@ static void mlx4_en_get_ethtool_stats(struct net_device *dev, for (i = 0; i < priv->rx_ring_num; i++) { data[index++] = priv->rx_ring[i]->packets; data[index++] = priv->rx_ring[i]->bytes; + data[index++] = priv->rx_ring[i]->dropped; } spin_unlock_bh(&priv->stats_lock); @@ -477,6 +478,8 @@ static void mlx4_en_get_strings(struct net_device *dev, "rx%d_packets", i); sprintf(data + (index++) * ETH_GSTRING_LEN, "rx%d_bytes", i); + sprintf(data + (index++) * ETH_GSTRING_LEN, + "rx%d_dropped", i); } break; case ETH_SS_PRIV_FLAGS: diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index 3904b5f..20b6c2e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -158,6 +158,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) u64 in_mod = reset << 8 | port; int err; int i, counter_index; + unsigned long sw_rx_dropped = 0; mailbox = mlx4_alloc_cmd_mailbox(mdev->dev); if (IS_ERR(mailbox)) @@ -180,6 +181,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) for (i = 0; i < priv->rx_ring_num; i++) { stats->rx_packets += priv->rx_ring[i]->packets; stats->rx_bytes += priv->rx_ring[i]->bytes; + sw_rx_dropped += priv->rx_ring[i]->dropped; priv->port_stats.rx_chksum_good += priv->rx_ring[i]->csum_ok; priv->port_stats.rx_chksum_none += priv->rx_ring[i]->csum_none; priv->port_stats.rx_chksum_complete += priv->rx_ring[i]->csum_complete; @@ -236,7 +238,8 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) &mlx4_en_stats->MCAST_prio_1, NUM_PRIORITIES); stats->collisions = 0; - stats->rx_dropped = be32_to_cpu(mlx4_en_stats->RDROP); + stats->rx_dropped = be32_to_cpu(mlx4_en_stats->RDROP) + + sw_rx_dropped; stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength); stats->rx_over_errors = 0; stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 7d25bc9..b723e3b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -943,7 +943,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud /* GRO not possible, complete processing here */ skb = mlx4_en_rx_skb(priv, rx_desc, frags, length); if (!skb) { - priv->stats.rx_dropped++; + ring->dropped++; goto next; } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index d12ab6a..63b1aea 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -323,6 +323,7 @@ struct mlx4_en_rx_ring { unsigned long csum_ok; unsigned long csum_none; unsigned long csum_complete; + unsigned long dropped; int hwtstamp_rx_filter; cpumask_var_t affinity_mask; }; -- cgit v0.10.2 From 91951f980e521d8f7e92283735b99fb9f4b05d93 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 21 Apr 2016 11:31:54 +0100 Subject: irqchip/mips-gic: Don't overrun pcpu_masks array Commit 2a0787051182 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS") & commit 78930f09b940 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping") both introduce code which accesses gic_vpes entries in the pcpu_masks array. However, this array has length NR_CPUS. If NR_CPUS is less than gic_vpes (ie. the kernel supports use of less CPUs than are present in the system) then we overrun the array, clobber some other data & generally die pretty promptly. Most notably this affects uniprocessor kernels running on any multicore or multithreaded Malta with a GIC (ie. the vast majority of real Malta boards). Fix this by only accessing up to min(gic_vpes, NR_CPUS) entries in the pcpu_masks array, preventing the array overrun. Fixes: 2a0787051182 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS") Fixes: 78930f09b940 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping") Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Jason Cooper Cc: Marc Zyngier Cc: Ralf Baechle Link: http://lkml.kernel.org/r/1461234714-9975-1-git-send-email-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 94a30da..4dffccf 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -467,7 +467,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask, gic_map_to_vpe(irq, mips_cm_vp_id(cpumask_first(&tmp))); /* Update the pcpu_masks */ - for (i = 0; i < gic_vpes; i++) + for (i = 0; i < min(gic_vpes, NR_CPUS); i++) clear_bit(irq, pcpu_masks[i].pcpu_mask); set_bit(irq, pcpu_masks[cpumask_first(&tmp)].pcpu_mask); @@ -707,7 +707,7 @@ static int gic_shared_irq_domain_map(struct irq_domain *d, unsigned int virq, spin_lock_irqsave(&gic_lock, flags); gic_map_to_pin(intr, gic_cpu_pin); gic_map_to_vpe(intr, vpe); - for (i = 0; i < gic_vpes; i++) + for (i = 0; i < min(gic_vpes, NR_CPUS); i++) clear_bit(intr, pcpu_masks[i].pcpu_mask); set_bit(intr, pcpu_masks[vpe].pcpu_mask); spin_unlock_irqrestore(&gic_lock, flags); -- cgit v0.10.2 From f43bfaeddc79effbf3d0fcb53ca477cca66f3db8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 20 Apr 2016 23:23:08 +0100 Subject: atl2: Disable unimplemented scatter/gather feature atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by: Justin Yackoski Signed-off-by: Ben Hutchings Fixes: ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c index 8f76f45..2ff4658 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.c +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -1412,7 +1412,7 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = -EIO; - netdev->hw_features = NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_RX; + netdev->hw_features = NETIF_F_HW_VLAN_CTAG_RX; netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX); /* Init PHY as early as possible due to power saving issue */ -- cgit v0.10.2 From f0d437809d23999cb25207cfbe80c61e5703fdc1 Mon Sep 17 00:00:00 2001 From: Shrikrishna Khare Date: Wed, 20 Apr 2016 18:12:29 -0700 Subject: Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packets For IPv6, if the device indicates that the checksum is correct, set CHECKSUM_UNNECESSARY. Reported-by: Subbarao Narahari Signed-off-by: Shrikrishna Khare Signed-off-by: Jin Heo Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index b2348f6..db8022a 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1152,12 +1152,16 @@ vmxnet3_rx_csum(struct vmxnet3_adapter *adapter, union Vmxnet3_GenericDesc *gdesc) { if (!gdesc->rcd.cnc && adapter->netdev->features & NETIF_F_RXCSUM) { - /* typical case: TCP/UDP over IP and both csums are correct */ - if ((le32_to_cpu(gdesc->dword[3]) & VMXNET3_RCD_CSUM_OK) == - VMXNET3_RCD_CSUM_OK) { + if (gdesc->rcd.v4 && + (le32_to_cpu(gdesc->dword[3]) & + VMXNET3_RCD_CSUM_OK) == VMXNET3_RCD_CSUM_OK) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + BUG_ON(!(gdesc->rcd.tcp || gdesc->rcd.udp)); + BUG_ON(gdesc->rcd.frg); + } else if (gdesc->rcd.v6 && (le32_to_cpu(gdesc->dword[3]) & + (1 << VMXNET3_RCD_TUC_SHIFT))) { skb->ip_summed = CHECKSUM_UNNECESSARY; BUG_ON(!(gdesc->rcd.tcp || gdesc->rcd.udp)); - BUG_ON(!(gdesc->rcd.v4 || gdesc->rcd.v6)); BUG_ON(gdesc->rcd.frg); } else { if (gdesc->rcd.csum) { diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 729c344..c482539 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -69,10 +69,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.4.6.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.4.7.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01040600 +#define VMXNET3_DRIVER_VERSION_NUM 0x01040700 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ -- cgit v0.10.2 From b4f70527f052b0c00be4d7cac562baa75b212df5 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 21 Apr 2016 11:49:15 +1000 Subject: openvswitch: use flow protocol when recalculating ipv6 checksums When using masked actions the ipv6_proto field of an action to set IPv6 fields may be zero rather than the prevailing protocol which will result in skipping checksum recalculation. This patch resolves the problem by relying on the protocol in the flow key rather than that in the set field action. Fixes: 83d2b9ba1abc ("net: openvswitch: Support masked set actions.") Cc: Jarno Rajahalme Signed-off-by: Simon Horman Signed-off-by: David S. Miller diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index e9dd47b..879185f 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -461,7 +461,7 @@ static int set_ipv6(struct sk_buff *skb, struct sw_flow_key *flow_key, mask_ipv6_addr(saddr, key->ipv6_src, mask->ipv6_src, masked); if (unlikely(memcmp(saddr, masked, sizeof(masked)))) { - set_ipv6_addr(skb, key->ipv6_proto, saddr, masked, + set_ipv6_addr(skb, flow_key->ip.proto, saddr, masked, true); memcpy(&flow_key->ipv6.addr.src, masked, sizeof(flow_key->ipv6.addr.src)); @@ -483,7 +483,7 @@ static int set_ipv6(struct sk_buff *skb, struct sw_flow_key *flow_key, NULL, &flags) != NEXTHDR_ROUTING); - set_ipv6_addr(skb, key->ipv6_proto, daddr, masked, + set_ipv6_addr(skb, flow_key->ip.proto, daddr, masked, recalc_csum); memcpy(&flow_key->ipv6.addr.dst, masked, sizeof(flow_key->ipv6.addr.dst)); -- cgit v0.10.2 From 9a3dce62cc5640d7ea17733a2bd1b57665c232b0 Mon Sep 17 00:00:00 2001 From: Zhuang Yuyao Date: Mon, 18 Apr 2016 09:21:42 +0900 Subject: rtc: ds1307: ds3231 temperature s16 overflow while retrieving temperature from ds3231, the result may be overflow since s16 is too small for a multiplication with 250. ie. if temp_buf[0] == 0x2d, the result (s16 temp) will be negative. Signed-off-by: Akinobu Mita Tested-by: Michael Tatarinov Signed-off-by: Alexandre Belloni diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index b2156ee..ee3cae2 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -863,7 +863,7 @@ out: * A user-initiated temperature conversion is not started by this function, * so the temperature is updated once every 64 seconds. */ -static int ds3231_hwmon_read_temp(struct device *dev, s16 *mC) +static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC) { struct ds1307 *ds1307 = dev_get_drvdata(dev); u8 temp_buf[2]; @@ -892,7 +892,7 @@ static ssize_t ds3231_hwmon_show_temp(struct device *dev, struct device_attribute *attr, char *buf) { int ret; - s16 temp; + s32 temp; ret = ds3231_hwmon_read_temp(dev, &temp); if (ret) -- cgit v0.10.2 From 38a7a73e8ed0fa9e8cd99bb62463afbdcd23429b Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 19 Apr 2016 11:23:54 -0500 Subject: rtc: ds1307: Use irq when available for wakeup-source device With commit 8bc2a40730ec ("rtc: ds1307: add support for the DT property 'wakeup-source'") we lost the ability for rtc irq functionality for devices that are actually hooked on a real IRQ line and have capability to wakeup as well. This is not an expected behavior. So, instead of just not requesting IRQ, skip the IRQ requirement only if interrupts are not defined for the device. Fixes: 8bc2a40730ec ("rtc: ds1307: add support for the DT property 'wakeup-source'") Reported-by: Tony Lindgren Cc: Michael Lange Cc: Alexandre Belloni Signed-off-by: Nishanth Menon Signed-off-by: Alexandre Belloni diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index ee3cae2..ecb7dba 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -1531,7 +1531,7 @@ read_rtc: return PTR_ERR(ds1307->rtc); } - if (ds1307_can_wakeup_device) { + if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) { /* Disable request for an IRQ */ want_irq = false; dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n"); -- cgit v0.10.2 From 38bdcfc1fc734a91fd982fe32290f3f70612bf33 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 22 Apr 2016 09:09:41 +1000 Subject: drm/nouveau/kms: fix setting of default values for dithering properties Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index ae96ebc..e81aefe 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1276,18 +1276,18 @@ nouveau_connector_create(struct drm_device *dev, int index) break; default: if (disp->dithering_mode) { + nv_connector->dithering_mode = DITHERING_MODE_AUTO; drm_object_attach_property(&connector->base, disp->dithering_mode, nv_connector-> dithering_mode); - nv_connector->dithering_mode = DITHERING_MODE_AUTO; } if (disp->dithering_depth) { + nv_connector->dithering_depth = DITHERING_DEPTH_AUTO; drm_object_attach_property(&connector->base, disp->dithering_depth, nv_connector-> dithering_depth); - nv_connector->dithering_depth = DITHERING_DEPTH_AUTO; } break; } -- cgit v0.10.2 From deba0a2af9592b2022a0bce7b085a318b53ce1db Mon Sep 17 00:00:00 2001 From: "cpaul@redhat.com" Date: Mon, 4 Apr 2016 19:58:47 -0400 Subject: drm/dp/mst: Validate port in drm_dp_payload_send_msg() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [] intel_mst_enable_dp+0xf8/0x180 [i915] [] haswell_crtc_enable+0x3ed/0x8c0 [i915] [] intel_atomic_commit+0x5ad/0x1590 [i915] [] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [] drm_atomic_commit+0x37/0x60 [drm] [] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [] drm_mode_set_config_internal+0x62/0x100 [drm] [] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [] drm_ioctl+0x143/0x510 [drm] [] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [] ? hrtimer_start_range_ns+0x1b7/0x3a0 [] do_vfs_ioctl+0x92/0x570 [] ? __sys_recvmsg+0x42/0x80 [] SyS_ioctl+0x79/0x90 [] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by: Lyude Reviewed-by: David Airlie Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 27fbd79..e17fbda 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -1672,13 +1672,19 @@ static int drm_dp_payload_send_msg(struct drm_dp_mst_topology_mgr *mgr, u8 sinks[DRM_DP_MAX_SDP_STREAMS]; int i; + port = drm_dp_get_validated_port_ref(mgr, port); + if (!port) + return -EINVAL; + port_num = port->port_num; mstb = drm_dp_get_validated_mstb_ref(mgr, port->parent); if (!mstb) { mstb = drm_dp_get_last_connected_port_and_mstb(mgr, port->parent, &port_num); - if (!mstb) + if (!mstb) { + drm_dp_put_port(port); return -EINVAL; + } } txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); @@ -1707,6 +1713,7 @@ static int drm_dp_payload_send_msg(struct drm_dp_mst_topology_mgr *mgr, kfree(txmsg); fail_put: drm_dp_put_mst_branch_device(mstb); + drm_dp_put_port(port); return ret; } -- cgit v0.10.2 From 3ea25f858fd5aeee888059952bbb8e910541eebb Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 18 Apr 2016 18:09:57 -0400 Subject: drm/amdgpu: use defines for CRTCs and AMFT blocks Prerequiste for the next patch which ups the limits. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h index 8d432e6..e4da6da 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h @@ -309,8 +309,8 @@ struct amdgpu_mode_info { struct atom_context *atom_context; struct card_info *atom_card_info; bool mode_config_initialized; - struct amdgpu_crtc *crtcs[6]; - struct amdgpu_afmt *afmt[7]; + struct amdgpu_crtc *crtcs[AMDGPU_MAX_CRTCS]; + struct amdgpu_afmt *afmt[AMDGPU_MAX_AFMT_BLOCKS]; /* DVI-I properties */ struct drm_property *coherent_mode_property; /* DAC enable load detect */ -- cgit v0.10.2 From 83c5cda2ccf40a7a7e4bb674321509b346e23d5a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 18 Apr 2016 18:25:34 -0400 Subject: drm/amdgpu: bump the afmt limit for CZ, ST, Polaris Fixes array overflow on these chips. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h index e4da6da..81bd964 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h @@ -53,7 +53,7 @@ struct amdgpu_hpd; #define AMDGPU_MAX_HPD_PINS 6 #define AMDGPU_MAX_CRTCS 6 -#define AMDGPU_MAX_AFMT_BLOCKS 7 +#define AMDGPU_MAX_AFMT_BLOCKS 9 enum amdgpu_rmx_type { RMX_OFF, -- cgit v0.10.2 From b5dcec693f87cb8475f2291c0075b2422addd3d6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=B4me=20Glisse?= Date: Tue, 19 Apr 2016 09:07:50 -0400 Subject: drm/radeon: forbid mapping of userptr bo through radeon device file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by: Christian König Signed-off-by: Jérôme Glisse Cc: Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 7dddfdc..90f7394 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -235,6 +235,8 @@ static int radeon_verify_access(struct ttm_buffer_object *bo, struct file *filp) { struct radeon_bo *rbo = container_of(bo, struct radeon_bo, tbo); + if (radeon_ttm_tt_has_userptr(bo->ttm)) + return -EPERM; return drm_vma_node_verify_access(&rbo->gem_base.vma_node, filp); } -- cgit v0.10.2 From 054892ed6a1645e265bc35641c2a96433a051453 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=B4me=20Glisse?= Date: Tue, 19 Apr 2016 09:07:51 -0400 Subject: drm/amdgpu: forbid mapping of userptr bo through radeon device file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by: Christian König Signed-off-by: Jérôme Glisse Cc: Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 6f3369d..11af449 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -223,6 +223,8 @@ static int amdgpu_verify_access(struct ttm_buffer_object *bo, struct file *filp) { struct amdgpu_bo *rbo = container_of(bo, struct amdgpu_bo, tbo); + if (amdgpu_ttm_tt_get_usermm(bo->ttm)) + return -EPERM; return drm_vma_node_verify_access(&rbo->gem_base.vma_node, filp); } -- cgit v0.10.2 From 562e2689baebaa2ac25b7ec934385480ed1cb7d6 Mon Sep 17 00:00:00 2001 From: Sonny Jiang Date: Mon, 18 Apr 2016 16:05:04 -0400 Subject: amdgpu/uvd: add uvd fw version for amdgpu Was previously always hardcoded to 0. Signed-off-by: Sonny Jiang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index b77489d..1bcbade 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1591,6 +1591,7 @@ struct amdgpu_uvd { struct amdgpu_bo *vcpu_bo; void *cpu_addr; uint64_t gpu_addr; + unsigned fw_version; void *saved_bo; atomic_t handles[AMDGPU_MAX_UVD_HANDLES]; struct drm_file *filp[AMDGPU_MAX_UVD_HANDLES]; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index aef70db..b04337d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -303,7 +303,7 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file fw_info.feature = adev->vce.fb_version; break; case AMDGPU_INFO_FW_UVD: - fw_info.ver = 0; + fw_info.ver = adev->uvd.fw_version; fw_info.feature = 0; break; case AMDGPU_INFO_FW_GMC: diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index 8d035b6..871018c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -158,6 +158,9 @@ int amdgpu_uvd_sw_init(struct amdgpu_device *adev) DRM_INFO("Found UVD firmware Version: %hu.%hu Family ID: %hu\n", version_major, version_minor, family_id); + adev->uvd.fw_version = ((version_major << 24) | (version_minor << 16) | + (family_id << 8)); + bo_size = AMDGPU_GPU_PAGE_ALIGN(le32_to_cpu(hdr->ucode_size_bytes) + 8) + AMDGPU_UVD_STACK_SIZE + AMDGPU_UVD_HEAP_SIZE; r = amdgpu_bo_create(adev, bo_size, PAGE_SIZE, true, -- cgit v0.10.2 From 28dca90533750c7e31e8641c3df426bad9c12941 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 22 Apr 2016 10:05:21 +1000 Subject: drm/nouveau/gr/gf100: select a stream master to fixup tfb offset queries Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c index c56a886..b2de290 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c @@ -1832,6 +1832,8 @@ gf100_gr_init(struct gf100_gr *gr) gf100_gr_mmio(gr, gr->func->mmio); + nvkm_mask(device, TPC_UNIT(0, 0, 0x05c), 0x00000001, 0x00000001); + memcpy(tpcnr, gr->tpc_nr, sizeof(gr->tpc_nr)); for (i = 0, gpc = -1; i < gr->tpc_total; i++) { do { -- cgit v0.10.2 From 221004c66a58949a0f25c937a6789c0839feb530 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 19 Apr 2016 19:19:11 +0800 Subject: drm: Loongson-3 doesn't fully support wc memory Signed-off-by: Huacai Chen Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/include/drm/drm_cache.h b/include/drm/drm_cache.h index 461a055..cebecff 100644 --- a/include/drm/drm_cache.h +++ b/include/drm/drm_cache.h @@ -39,6 +39,8 @@ static inline bool drm_arch_can_wc_memory(void) { #if defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE) return false; +#elif defined(CONFIG_MIPS) && defined(CONFIG_CPU_LOONGSON3) + return false; #else return true; #endif -- cgit v0.10.2 From c2bb9e32e2315971a8535fee77335c04a739d71d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 20 Apr 2016 11:32:35 -0400 Subject: objtool: Fix Makefile to properly see if libelf is supported When doing a make allmodconfig, I hit the following compile error: In file included from builtin-check.c:32:0: elf.h:22:18: fatal error: gelf.h: No such file or directory compilation terminated. ... Digging into it, it appears that the $(shell ..) command in the Makefile does not give the proper result when it fails to find -lelf, and continues to compile objtool. Instead, use the "try-run" makefile macro to perform the test. This gives a proper result for both cases. Signed-off-by: Steven Rostedt Acked-by: Josh Poimboeuf Cc: Andrew Morton Cc: Andy Lutomirski Cc: Arnaldo Carvalho de Melo Cc: Bernd Petrovitsch Cc: Borislav Petkov Cc: Chris J Arges Cc: Jiri Slaby Cc: Linus Torvalds Cc: Michal Marek Cc: Namhyung Kim Cc: Pedro Alves Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: live-patching@vger.kernel.org Fixes: 442f04c34a1a4 ("objtool: Add tool to perform compile-time stack metadata validation") Link: http://lkml.kernel.org/r/20160420153234.GA24032@home.goodmis.org Signed-off-by: Ingo Molnar diff --git a/Makefile b/Makefile index 1d0aef0..70ca38e 100644 --- a/Makefile +++ b/Makefile @@ -1008,7 +1008,8 @@ prepare0: archprepare FORCE prepare: prepare0 prepare-objtool ifdef CONFIG_STACK_VALIDATION - has_libelf := $(shell echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf - &> /dev/null && echo 1 || echo 0) + has_libelf := $(call try-run,\ + echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf -,1,0) ifeq ($(has_libelf),1) objtool_target := tools/objtool FORCE else -- cgit v0.10.2 From 16eeed7e5558a3dcf30f75526a896b2632f299f9 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Tue, 19 Apr 2016 15:43:02 +0200 Subject: clocksource/drivers/tango-xtal: Fix boot hang due to incorrect test Commit 0881841f7e78 introduced a regression by inverting a test check after calling clocksource_mmio_init(). That results on the system to hang at boot time. Fix it by inverting the test again. Fixes: 0881841f7e78 ("Replace code by clocksource_mmio_init") Reported-by: Marc Gonzalez Signed-off-by: Daniel Lezcano diff --git a/drivers/clocksource/tango_xtal.c b/drivers/clocksource/tango_xtal.c index 2bcecaf..c407c47 100644 --- a/drivers/clocksource/tango_xtal.c +++ b/drivers/clocksource/tango_xtal.c @@ -42,7 +42,7 @@ static void __init tango_clocksource_init(struct device_node *np) ret = clocksource_mmio_init(xtal_in_cnt, "tango-xtal", xtal_freq, 350, 32, clocksource_mmio_readl_up); - if (!ret) { + if (ret) { pr_err("%s: registration failed\n", np->full_name); return; } -- cgit v0.10.2 From 3b9d6da67e11ca8f78fde887918983523a36b0fa Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 8 Apr 2016 14:40:15 +0200 Subject: cpu/hotplug: Fix rollback during error-out in __cpu_disable() The recent introduction of the hotplug thread which invokes the callbacks on the plugged cpu, cased the following regression: If takedown_cpu() fails, then we run into several issues: 1) The rollback of the target cpu states is not invoked. That leaves the smp threads and the hotplug thread in disabled state. 2) notify_online() is executed due to a missing skip_onerr flag. That causes that both CPU_DOWN_FAILED and CPU_ONLINE notifications are invoked which confuses quite some notifiers. 3) The CPU_DOWN_FAILED notification is not invoked on the target CPU. That's not an issue per se, but it is inconsistent and in consequence blocks the patches which rely on these states being invoked on the target CPU and not on the controlling cpu. It also does not preserve the strict call order on rollback which is problematic for the ongoing state machine conversion as well. To fix this we add a rollback flag to the remote callback machinery and invoke the rollback including the CPU_DOWN_FAILED notification on the remote cpu. Further mark the notify online state with 'skip_onerr' so we don't get a double invokation. This workaround will go away once we moved the unplug invocation to the target cpu itself. [ tglx: Massaged changelog and moved the CPU_DOWN_FAILED notifiaction to the target cpu ] Fixes: 4cb28ced23c4 ("cpu/hotplug: Create hotplug threads") Reported-by: Heiko Carstens Signed-off-by: Sebastian Andrzej Siewior Cc: linux-s390@vger.kernel.org Cc: rt@linutronix.de Cc: Martin Schwidefsky Cc: Anna-Maria Gleixner Link: http://lkml.kernel.org/r/20160408124015.GA21960@linutronix.de Signed-off-by: Thomas Gleixner diff --git a/kernel/cpu.c b/kernel/cpu.c index 6ea42e8..3e3f6e4 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -36,6 +36,7 @@ * @target: The target state * @thread: Pointer to the hotplug thread * @should_run: Thread should execute + * @rollback: Perform a rollback * @cb_stat: The state for a single callback (install/uninstall) * @cb: Single callback function (install/uninstall) * @result: Result of the operation @@ -47,6 +48,7 @@ struct cpuhp_cpu_state { #ifdef CONFIG_SMP struct task_struct *thread; bool should_run; + bool rollback; enum cpuhp_state cb_state; int (*cb)(unsigned int cpu); int result; @@ -301,6 +303,11 @@ static int cpu_notify(unsigned long val, unsigned int cpu) return __cpu_notify(val, cpu, -1, NULL); } +static void cpu_notify_nofail(unsigned long val, unsigned int cpu) +{ + BUG_ON(cpu_notify(val, cpu)); +} + /* Notifier wrappers for transitioning to state machine */ static int notify_prepare(unsigned int cpu) { @@ -477,6 +484,16 @@ static void cpuhp_thread_fun(unsigned int cpu) } else { ret = cpuhp_invoke_callback(cpu, st->cb_state, st->cb); } + } else if (st->rollback) { + BUG_ON(st->state < CPUHP_AP_ONLINE_IDLE); + + undo_cpu_down(cpu, st, cpuhp_ap_states); + /* + * This is a momentary workaround to keep the notifier users + * happy. Will go away once we got rid of the notifiers. + */ + cpu_notify_nofail(CPU_DOWN_FAILED, cpu); + st->rollback = false; } else { /* Cannot happen .... */ BUG_ON(st->state < CPUHP_AP_ONLINE_IDLE); @@ -636,11 +653,6 @@ static inline void check_for_tasks(int dead_cpu) read_unlock(&tasklist_lock); } -static void cpu_notify_nofail(unsigned long val, unsigned int cpu) -{ - BUG_ON(cpu_notify(val, cpu)); -} - static int notify_down_prepare(unsigned int cpu) { int err, nr_calls = 0; @@ -721,9 +733,10 @@ static int takedown_cpu(unsigned int cpu) */ err = stop_machine(take_cpu_down, NULL, cpumask_of(cpu)); if (err) { - /* CPU didn't die: tell everyone. Can't complain. */ - cpu_notify_nofail(CPU_DOWN_FAILED, cpu); + /* CPU refused to die */ irq_unlock_sparse(); + /* Unpark the hotplug thread so we can rollback there */ + kthread_unpark(per_cpu_ptr(&cpuhp_state, cpu)->thread); return err; } BUG_ON(cpu_online(cpu)); @@ -832,6 +845,11 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen, * to do the further cleanups. */ ret = cpuhp_down_callbacks(cpu, st, cpuhp_bp_states, target); + if (ret && st->state > CPUHP_TEARDOWN_CPU && st->state < prev_state) { + st->target = prev_state; + st->rollback = true; + cpuhp_kick_ap_work(cpu); + } hasdied = prev_state != st->state && st->state == CPUHP_OFFLINE; out: @@ -1249,6 +1267,7 @@ static struct cpuhp_step cpuhp_ap_states[] = { .name = "notify:online", .startup = notify_online, .teardown = notify_down_prepare, + .skip_onerr = true, }, #endif /* -- cgit v0.10.2 From 78b0634d2851d30ec5d289aefbae23b141de67f0 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 22 Apr 2016 09:35:04 +0200 Subject: x86/doc: Correct limits in Documentation/x86/x86_64/mm.txt Correct the size of the module mapping space and the maximum available physical memory size of current processors. Signed-off-by: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1461310504-15977-1-git-send-email-jgross@suse.com Signed-off-by: Ingo Molnar diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index c518dce..5aa7383 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt @@ -19,7 +19,7 @@ ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space ... unused hole ... ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0 -ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space +ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole @@ -31,8 +31,8 @@ vmalloc space is lazily synchronized into the different PML4 pages of the processes using the page fault handler, with init_level4_pgt as reference. -Current X86-64 implementations only support 40 bits of address space, -but we support up to 46 bits. This expands into MBZ space in the page tables. +Current X86-64 implementations support up to 46 bits of address space (64 TB), +which is our current limit. This expands into MBZ space in the page tables. We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual memory window (this size is arbitrary, it can be raised later if needed). -- cgit v0.10.2 From 103f6112f253017d7062cd74d17f4a514ed4485c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 21 Apr 2016 00:27:04 -0600 Subject: x86/mm/xen: Suppress hugetlbfs in PV guests Huge pages are not normally available to PV guests. Not suppressing hugetlbfs use results in an endless loop of page faults when user mode code tries to access a hugetlbfs mapped area (since the hypervisor denies such PTEs to be created, but error indications can't be propagated out of xen_set_pte_at(), just like for various of its siblings), and - once killed in an oops like this: kernel BUG at .../fs/hugetlbfs/inode.c:428! invalid opcode: 0000 [#1] SMP ... RIP: e030:[] [] remove_inode_hugepages+0x25b/0x320 ... Call Trace: [] hugetlbfs_evict_inode+0x15/0x40 [] evict+0xbd/0x1b0 [] __dentry_kill+0x19a/0x1f0 [] dput+0x1fe/0x220 [] __fput+0x155/0x200 [] task_work_run+0x60/0xa0 [] do_exit+0x160/0x400 [] do_group_exit+0x3b/0xa0 [] get_signal+0x1ed/0x470 [] do_signal+0x14/0x110 [] prepare_exit_to_usermode+0xe9/0xf0 [] retint_user+0x8/0x13 This is CVE-2016-3961 / XSA-174. Reported-by: Vitaly Kuznetsov Signed-off-by: Jan Beulich Cc: Andrew Morton Cc: Andy Lutomirski Cc: Boris Ostrovsky Cc: Borislav Petkov Cc: Brian Gerst Cc: David Vrabel Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Juergen Gross Cc: Linus Torvalds Cc: Luis R. Rodriguez Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Toshi Kani Cc: stable@vger.kernel.org Cc: xen-devel Link: http://lkml.kernel.org/r/57188ED802000078000E431C@prv-mh.provo.novell.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/hugetlb.h b/arch/x86/include/asm/hugetlb.h index f8a29d2..e6a8613 100644 --- a/arch/x86/include/asm/hugetlb.h +++ b/arch/x86/include/asm/hugetlb.h @@ -4,6 +4,7 @@ #include #include +#define hugepages_supported() cpu_has_pse static inline int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, -- cgit v0.10.2 From ff15e95c82768d589957dbb17d7eb7dba7904659 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 14 Apr 2016 10:21:52 -0700 Subject: x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel address In commit: eb1af3b71f9d ("Fix computation of channel address") I switched the "sck_way" variable from holding the log2 value read from the h/w to instead be the actual number. Unfortunately it is needed in log2 form when used to shift the address. Tested-by: Patrick Geary Signed-off-by: Tony Luck Acked-by: Mauro Carvalho Chehab Cc: Aristeu Rozanski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Fixes: eb1af3b71f9d ("Fix computation of channel address") Signed-off-by: Ingo Molnar diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 93f0d41..f4666b0 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -2118,7 +2118,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, } ch_way = TAD_CH(reg) + 1; - sck_way = 1 << TAD_SOCK(reg); + sck_way = TAD_SOCK(reg); if (ch_way == 3) idx = addr >> 6; @@ -2157,7 +2157,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, switch(ch_way) { case 2: case 4: - sck_xch = 1 << sck_way * (ch_way >> 1); + sck_xch = (1 << sck_way) * (ch_way >> 1); break; default: sprintf(msg, "Invalid mirror set. Can't decode addr"); @@ -2193,7 +2193,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, ch_addr = addr - offset; ch_addr >>= (6 + shiftup); - ch_addr /= ch_way * sck_way; + ch_addr /= sck_xch; ch_addr <<= (6 + shiftup); ch_addr |= addr & ((1 << (6 + shiftup)) - 1); -- cgit v0.10.2 From ea5dfb5fae81939f777ca569d8cfb599252da2e8 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 14 Apr 2016 10:22:02 -0700 Subject: x86 EDAC, sb_edac.c: Take account of channel hashing when needed Haswell and Broadwell can be configured to hash the channel interleave function using bits [27:12] of the physical address. On those processor models we must check to see if hashing is enabled (bit21 of the HASWELL_HASYSDEFEATURE2 register) and act accordingly. Based on a patch by patrickg Tested-by: Patrick Geary Signed-off-by: Tony Luck Acked-by: Mauro Carvalho Chehab Cc: Aristeu Rozanski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Ingo Molnar diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index f4666b0..468447a 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -362,6 +362,7 @@ struct sbridge_pvt { /* Memory type detection */ bool is_mirrored, is_lockstep, is_close_pg; + bool is_chan_hash; /* Fifo double buffers */ struct mce mce_entry[MCE_LOG_LEN]; @@ -1060,6 +1061,20 @@ static inline u8 sad_pkg_ha(u8 pkg) return (pkg >> 2) & 0x1; } +static int haswell_chan_hash(int idx, u64 addr) +{ + int i; + + /* + * XOR even bits from 12:26 to bit0 of idx, + * odd bits from 13:27 to bit1 + */ + for (i = 12; i < 28; i += 2) + idx ^= (addr >> i) & 3; + + return idx; +} + /**************************************************************************** Memory check routines ****************************************************************************/ @@ -1616,6 +1631,10 @@ static int get_dimm_config(struct mem_ctl_info *mci) KNL_MAX_CHANNELS : NUM_CHANNELS; u64 knl_mc_sizes[KNL_MAX_CHANNELS]; + if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL) { + pci_read_config_dword(pvt->pci_ha0, HASWELL_HASYSDEFEATURE2, ®); + pvt->is_chan_hash = GET_BITFIELD(reg, 21, 21); + } if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL || pvt->info.type == KNIGHTS_LANDING) pci_read_config_dword(pvt->pci_sad1, SAD_TARGET, ®); @@ -2122,8 +2141,11 @@ static int get_memory_error_data(struct mem_ctl_info *mci, if (ch_way == 3) idx = addr >> 6; - else + else { idx = (addr >> (6 + sck_way + shiftup)) & 0x3; + if (pvt->is_chan_hash) + idx = haswell_chan_hash(idx, addr); + } idx = idx % ch_way; /* -- cgit v0.10.2 From d9676fa152c83b82137af950b1d4f629045d90c9 Mon Sep 17 00:00:00 2001 From: Evgeny Voevodin Date: Wed, 23 Mar 2016 12:26:52 +0300 Subject: ARCv2: Enable LOCKDEP - The asm helpers for calling into irq tracer were missing - Add calls to above helpers in low level assembly entry code for ARCv2 - irq_save() uses CLRI to disable interrupts and returns the prev interrupt state (in STATUS32) in a specific encoding (and not the raw value of STATUS32). This is usable with SETI in irq_restore(). However save_flags() reads the raw value of STATUS32 which doesn't pair with irq_save/restore() and thus needs fixing. Signed-off-by: Evgeny Voevodin [vgupta: updated changelog and also added some comments] Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h index 37c2f75..d1ec7f6 100644 --- a/arch/arc/include/asm/irqflags-arcv2.h +++ b/arch/arc/include/asm/irqflags-arcv2.h @@ -18,6 +18,12 @@ #define STATUS_AD_MASK (1< Date: Wed, 13 Apr 2016 13:59:14 +1000 Subject: i2c: cpm: Fix build break due to incompatible pointer types Since commit ea8daa7b9784 ("kbuild: Add option to turn incompatible pointer check into error"), assignments from an incompatible pointer types have become a hard error, eg: drivers/i2c/busses/i2c-cpm.c:545:91: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type Fix the build break by converting txdma & rxdma to dma_addr_t. Signed-off-by: Michael Ellerman Signed-off-by: Wolfram Sang Cc: stable@kernel.org Fixes: ea8daa7b9784 diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 714bdc8..b167ab2 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -116,8 +116,8 @@ struct cpm_i2c { cbd_t __iomem *rbase; u_char *txbuf[CPM_MAXBD]; u_char *rxbuf[CPM_MAXBD]; - u32 txdma[CPM_MAXBD]; - u32 rxdma[CPM_MAXBD]; + dma_addr_t txdma[CPM_MAXBD]; + dma_addr_t rxdma[CPM_MAXBD]; }; static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id) -- cgit v0.10.2 From 10ff4c5239a137abfc896ec73ef3d15a0f86a16a Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Sat, 16 Apr 2016 21:14:52 -0400 Subject: i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared The exynos5 I2C controller driver always prepares and enables a clock before using it and then disables unprepares it when the clock is not used anymore. But this can cause a possible ABBA deadlock in some scenarios since a driver that uses regmap to access its I2C registers, will first grab the regmap lock and then the I2C xfer function will grab the prepare lock when preparing the I2C clock. But since the clock driver also uses regmap for I2C accesses, preparing a clock will first grab the prepare lock and then the regmap lock when using the regmap API. An example of this happens on the Exynos5422 Odroid XU4 board where a s2mps11 PMIC is used and both the s2mps11 regulators and clk drivers share the same I2C regmap. The possible deadlock is reported by the kernel lockdep: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sec_core:428:(regmap)->lock); lock(prepare_lock); lock(sec_core:428:(regmap)->lock); lock(prepare_lock); *** DEADLOCK *** Fix it by leaving the code prepared on probe and use {en,dis}able in the I2C transfer function. This patch is similar to commit 34e81ad5f0b6 ("i2c: s3c2410: fix ABBA deadlock by keeping clock prepared") that fixes the same bug in other driver for an I2C controller found in Samsung SoCs. Reported-by: Anand Moon Signed-off-by: Javier Martinez Canillas Reviewed-by: Anand Moon Reviewed-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index b29c750..f54ece8 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -671,7 +671,9 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap, return -EIO; } - clk_prepare_enable(i2c->clk); + ret = clk_enable(i2c->clk); + if (ret) + return ret; for (i = 0; i < num; i++, msgs++) { stop = (i == num - 1); @@ -695,7 +697,7 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap, } out: - clk_disable_unprepare(i2c->clk); + clk_disable(i2c->clk); return ret; } @@ -747,7 +749,9 @@ static int exynos5_i2c_probe(struct platform_device *pdev) return -ENOENT; } - clk_prepare_enable(i2c->clk); + ret = clk_prepare_enable(i2c->clk); + if (ret) + return ret; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); i2c->regs = devm_ioremap_resource(&pdev->dev, mem); @@ -799,6 +803,10 @@ static int exynos5_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); + clk_disable(i2c->clk); + + return 0; + err_clk: clk_disable_unprepare(i2c->clk); return ret; @@ -810,6 +818,8 @@ static int exynos5_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&i2c->adap); + clk_unprepare(i2c->clk); + return 0; } @@ -821,6 +831,8 @@ static int exynos5_i2c_suspend_noirq(struct device *dev) i2c->suspended = 1; + clk_unprepare(i2c->clk); + return 0; } @@ -830,7 +842,9 @@ static int exynos5_i2c_resume_noirq(struct device *dev) struct exynos5_i2c *i2c = platform_get_drvdata(pdev); int ret = 0; - clk_prepare_enable(i2c->clk); + ret = clk_prepare_enable(i2c->clk); + if (ret) + return ret; ret = exynos5_hsi2c_clock_setup(i2c); if (ret) { @@ -839,7 +853,7 @@ static int exynos5_i2c_resume_noirq(struct device *dev) } exynos5_i2c_init(i2c); - clk_disable_unprepare(i2c->clk); + clk_disable(i2c->clk); i2c->suspended = 0; return 0; -- cgit v0.10.2 From 630ba0cc7a6dbafbdee43795617c872b35cde1b4 Mon Sep 17 00:00:00 2001 From: Laszlo Ersek Date: Thu, 21 Apr 2016 18:21:11 +0200 Subject: efi: Fix out-of-bounds read in variable_matches() The variable_matches() function can currently read "var_name[len]", for example when: - var_name[0] == 'a', - len == 1 - match_name points to the NUL-terminated string "ab". This function is supposed to accept "var_name" inputs that are not NUL-terminated (hence the "len" parameter"). Document the function, and access "var_name[*match]" only if "*match" is smaller than "len". Reported-by: Chris Wilson Signed-off-by: Laszlo Ersek Cc: Peter Jones Cc: Matthew Garrett Cc: Jason Andryuk Cc: Jani Nikula Cc: # v3.10+ Link: http://thread.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/86906 Signed-off-by: Matt Fleming diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c index 0ac594c..34b7419 100644 --- a/drivers/firmware/efi/vars.c +++ b/drivers/firmware/efi/vars.c @@ -202,29 +202,44 @@ static const struct variable_validate variable_validate[] = { { NULL_GUID, "", NULL }, }; +/* + * Check if @var_name matches the pattern given in @match_name. + * + * @var_name: an array of @len non-NUL characters. + * @match_name: a NUL-terminated pattern string, optionally ending in "*". A + * final "*" character matches any trailing characters @var_name, + * including the case when there are none left in @var_name. + * @match: on output, the number of non-wildcard characters in @match_name + * that @var_name matches, regardless of the return value. + * @return: whether @var_name fully matches @match_name. + */ static bool variable_matches(const char *var_name, size_t len, const char *match_name, int *match) { for (*match = 0; ; (*match)++) { char c = match_name[*match]; - char u = var_name[*match]; - /* Wildcard in the matching name means we've matched */ - if (c == '*') + switch (c) { + case '*': + /* Wildcard in @match_name means we've matched. */ return true; - /* Case sensitive match */ - if (!c && *match == len) - return true; + case '\0': + /* @match_name has ended. Has @var_name too? */ + return (*match == len); - if (c != u) + default: + /* + * We've reached a non-wildcard char in @match_name. + * Continue only if there's an identical character in + * @var_name. + */ + if (*match < len && c == var_name[*match]) + continue; return false; - - if (!c) - return true; + } } - return true; } bool -- cgit v0.10.2 From f4e7de63ab273b6a5e35c82eb4fc6363c855ddd4 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Fri, 22 Apr 2016 20:14:58 -0400 Subject: IB/core: Fix oops in ib_cache_gid_set_default_gid When we fail to find the default gid index, we can't continue processing in this routine or else we will pass a negative index to later routines resulting in invalid memory access attempts and a kernel oops. Fixes: 03db3a2d81e6 (IB/core: Add RoCE GID table management) Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index cb00d59..c2e257d 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -691,7 +691,8 @@ void ib_cache_gid_set_default_gid(struct ib_device *ib_dev, u8 port, NULL); /* Coudn't find default GID location */ - WARN_ON(ix < 0); + if (WARN_ON(ix < 0)) + goto release; zattr_type.gid_type = gid_type; -- cgit v0.10.2 From 707e59ba494372a90d245f18b0c78982caa88e48 Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Fri, 22 Apr 2016 13:05:31 +0100 Subject: xen/qspinlock: Don't kick CPU if IRQ is not initialized The following commit: 1fb3a8b2cfb2 ("xen/spinlock: Fix locking path engaging too soon under PVHVM.") ... moved the initalization of the kicker interrupt until after native_cpu_up() is called. However, when using qspinlocks, a CPU may try to kick another CPU that is spinning (because it has not yet initialized its kicker interrupt), resulting in the following crash during boot: kernel BUG at /build/linux-Ay7j_C/linux-4.4.0/drivers/xen/events/events_base.c:1210! invalid opcode: 0000 [#1] SMP ... RIP: 0010:[] [] xen_send_IPI_one+0x59/0x60 ... Call Trace: [] xen_qlock_kick+0xe/0x10 [] __pv_queued_spin_unlock+0xb2/0xf0 [] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [] ? check_tsc_warp+0x76/0x150 [] check_tsc_sync_source+0x96/0x160 [] native_cpu_up+0x3d8/0x9f0 [] xen_hvm_cpu_up+0x35/0x80 [] _cpu_up+0x13c/0x180 [] cpu_up+0x7a/0xa0 [] smp_init+0x7f/0x81 [] kernel_init_freeable+0xef/0x212 [] ? rest_init+0x80/0x80 [] kernel_init+0xe/0xe0 [] ret_from_fork+0x3f/0x70 [] ? rest_init+0x80/0x80 To fix this, only send the kick if the target CPU's interrupt has been initialized. This check isn't racy, because the target is waiting for the spinlock, so it won't have initialized the interrupt in the meantime. Signed-off-by: Ross Lagerwall Reviewed-by: Boris Ostrovsky Cc: David Vrabel Cc: Juergen Gross Cc: Konrad Rzeszutek Wilk Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c index 9e2ba5c..f42e78d 100644 --- a/arch/x86/xen/spinlock.c +++ b/arch/x86/xen/spinlock.c @@ -27,6 +27,12 @@ static bool xen_pvspin = true; static void xen_qlock_kick(int cpu) { + int irq = per_cpu(lock_kicker_irq, cpu); + + /* Don't kick if the target's kicker interrupt is not initialized. */ + if (irq == -1) + return; + xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR); } -- cgit v0.10.2 From c24697566298df04cac9913e0601501b5ee2b3f5 Mon Sep 17 00:00:00 2001 From: Boqun Feng Date: Tue, 16 Feb 2016 13:57:40 +0800 Subject: locking/lockdep: Fix ->irq_context calculation task_irq_context() returns the encoded irq_context of the task, the return value is encoded in the same as ->irq_context of held_lock. Always return 0 if !(CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING) Signed-off-by: Boqun Feng Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: Josh Triplett Cc: Lai Jiangshan Cc: Linus Torvalds Cc: Mathieu Desnoyers Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Cc: sasha.levin@oracle.com Link: http://lkml.kernel.org/r/1455602265-16490-2-git-send-email-boqun.feng@gmail.com Signed-off-by: Ingo Molnar diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c index ed94109..beb06f6 100644 --- a/kernel/locking/lockdep.c +++ b/kernel/locking/lockdep.c @@ -2932,6 +2932,11 @@ static int mark_irqflags(struct task_struct *curr, struct held_lock *hlock) return 1; } +static inline unsigned int task_irq_context(struct task_struct *task) +{ + return 2 * !!task->hardirq_context + !!task->softirq_context; +} + static int separate_irq_context(struct task_struct *curr, struct held_lock *hlock) { @@ -2940,8 +2945,6 @@ static int separate_irq_context(struct task_struct *curr, /* * Keep track of points where we cross into an interrupt context: */ - hlock->irq_context = 2*(curr->hardirq_context ? 1 : 0) + - curr->softirq_context; if (depth) { struct held_lock *prev_hlock; @@ -2973,6 +2976,11 @@ static inline int mark_irqflags(struct task_struct *curr, return 1; } +static inline unsigned int task_irq_context(struct task_struct *task) +{ + return 0; +} + static inline int separate_irq_context(struct task_struct *curr, struct held_lock *hlock) { @@ -3241,6 +3249,7 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass, hlock->acquire_ip = ip; hlock->instance = lock; hlock->nest_lock = nest_lock; + hlock->irq_context = task_irq_context(curr); hlock->trylock = trylock; hlock->read = read; hlock->check = check; -- cgit v0.10.2 From 75dd602a5198a6e5f75534db52b6e6fbaabb33d1 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 30 Mar 2016 11:36:59 +0200 Subject: lockdep: Fix lock_chain::base size lock_chain::base is used to store an index into the chain_hlocks[] array, however that array contains more elements than can be indexed using the u16. Change the lock_chain structure to use a bitfield to encode the data it needs and add BUILD_BUG_ON() assertions to check the fields are wide enough. Also, for DEBUG_LOCKDEP, assert that we don't run out of elements of that array; as that would wreck the collision detectoring. Signed-off-by: Peter Zijlstra (Intel) Cc: Alfredo Alvarez Fernandez Cc: Andrew Morton Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Sedat Dilek Cc: Theodore Ts'o Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20160330093659.GS3408@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index d026b19..d10ef06 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -196,9 +196,11 @@ struct lock_list { * We record lock dependency chains, so that we can cache them: */ struct lock_chain { - u8 irq_context; - u8 depth; - u16 base; + /* see BUILD_BUG_ON()s in lookup_chain_cache() */ + unsigned int irq_context : 2, + depth : 6, + base : 24; + /* 4 byte hole */ struct hlist_node entry; u64 chain_key; }; diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c index beb06f6..78c1c0e 100644 --- a/kernel/locking/lockdep.c +++ b/kernel/locking/lockdep.c @@ -2176,15 +2176,37 @@ cache_hit: chain->irq_context = hlock->irq_context; i = get_first_held_lock(curr, hlock); chain->depth = curr->lockdep_depth + 1 - i; + + BUILD_BUG_ON((1UL << 24) <= ARRAY_SIZE(chain_hlocks)); + BUILD_BUG_ON((1UL << 6) <= ARRAY_SIZE(curr->held_locks)); + BUILD_BUG_ON((1UL << 8*sizeof(chain_hlocks[0])) <= ARRAY_SIZE(lock_classes)); + if (likely(nr_chain_hlocks + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS)) { chain->base = nr_chain_hlocks; - nr_chain_hlocks += chain->depth; for (j = 0; j < chain->depth - 1; j++, i++) { int lock_id = curr->held_locks[i].class_idx - 1; chain_hlocks[chain->base + j] = lock_id; } chain_hlocks[chain->base + j] = class - lock_classes; } + + if (nr_chain_hlocks < MAX_LOCKDEP_CHAIN_HLOCKS) + nr_chain_hlocks += chain->depth; + +#ifdef CONFIG_DEBUG_LOCKDEP + /* + * Important for check_no_collision(). + */ + if (unlikely(nr_chain_hlocks > MAX_LOCKDEP_CHAIN_HLOCKS)) { + if (debug_locks_off_graph_unlock()) + return 0; + + print_lockdep_off("BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!"); + dump_stack(); + return 0; + } +#endif + hlist_add_head_rcu(&chain->entry, hash_head); debug_atomic_inc(chain_lookup_misses); inc_chains(); diff --git a/kernel/locking/lockdep_proc.c b/kernel/locking/lockdep_proc.c index dbb61a3..a0f61ef 100644 --- a/kernel/locking/lockdep_proc.c +++ b/kernel/locking/lockdep_proc.c @@ -141,6 +141,8 @@ static int lc_show(struct seq_file *m, void *v) int i; if (v == SEQ_START_TOKEN) { + if (nr_chain_hlocks > MAX_LOCKDEP_CHAIN_HLOCKS) + seq_printf(m, "(buggered) "); seq_printf(m, "all lock chains:\n"); return 0; } -- cgit v0.10.2 From 56896ef5b990a3822da45f92e548c4c8ac301bb4 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 15 Apr 2016 19:30:46 +0900 Subject: arm64: dts: uniphier: fix I2C nodes of PH1-LD20 The I2C hardware blocks on this SoC are connected as follows: I2C0: external connection I2C1: external connection I2C2: internal connection I2C3: external connection I2C4: external connection I2C5: internal connection I2C6: no connection (not accessible) Delete pinctrl from Ch2, add pinctrl to Ch4, and remove the Ch6 node. Signed-off-by: Masahiro Yamada Signed-off-by: Arnd Bergmann diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts index 727ae5f..b0ed443 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts @@ -70,7 +70,6 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; - i2c6 = &i2c6; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi index e682a3f..651c9d9 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi @@ -201,15 +201,12 @@ i2c2: i2c@58782000 { compatible = "socionext,uniphier-fi2c"; - status = "disabled"; reg = <0x58782000 0x80>; #address-cells = <1>; #size-cells = <0>; interrupts = <0 43 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; clocks = <&i2c_clk>; - clock-frequency = <100000>; + clock-frequency = <400000>; }; i2c3: i2c@58783000 { @@ -227,12 +224,15 @@ i2c4: i2c@58784000 { compatible = "socionext,uniphier-fi2c"; + status = "disabled"; reg = <0x58784000 0x80>; #address-cells = <1>; #size-cells = <0>; interrupts = <0 45 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; clocks = <&i2c_clk>; - clock-frequency = <400000>; + clock-frequency = <100000>; }; i2c5: i2c@58785000 { @@ -245,16 +245,6 @@ clock-frequency = <400000>; }; - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&i2c_clk>; - clock-frequency = <400000>; - }; - system_bus: system-bus@58c00000 { compatible = "socionext,uniphier-system-bus"; status = "disabled"; -- cgit v0.10.2 From 987aedb5d6f6e10c5203c6d0aab9a60ec22c7e93 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Mon, 11 Apr 2016 10:17:46 +0100 Subject: generic syscalls: wire up preadv2 and pwritev2 syscalls These new syscalls are implemented as generic code, so enable them for architectures like arm64 which use the generic syscall table. Signed-off-by: Andre Przywara Signed-off-by: Arnd Bergmann diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h index 2622b33..6e0f5f0 100644 --- a/include/uapi/asm-generic/unistd.h +++ b/include/uapi/asm-generic/unistd.h @@ -717,9 +717,13 @@ __SYSCALL(__NR_membarrier, sys_membarrier) __SYSCALL(__NR_mlock2, sys_mlock2) #define __NR_copy_file_range 285 __SYSCALL(__NR_copy_file_range, sys_copy_file_range) +#define __NR_preadv2 286 +__SYSCALL(__NR_preadv2, sys_preadv2) +#define __NR_pwritev2 287 +__SYSCALL(__NR_pwritev2, sys_pwritev2) #undef __NR_syscalls -#define __NR_syscalls 286 +#define __NR_syscalls 288 /* * All syscalls below here should go away really, -- cgit v0.10.2 From f75cfbaddeef943aed479b80415c3dcc63ff4247 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 21 Apr 2016 13:13:56 +0300 Subject: MAINTAINERS: net: add entry for TI Ethernet Switch drivers Add record for TI Ethernet Switch Driver CPSW/CPDMA/MDIO HW (am33/am43/am57/dr7/davinci) to ensure that related patches will go through dedicated linux-omap list. Also add Mugunthan as maintainer and myself as the reviewer. Cc: "David S. Miller" Cc: Tony Lindgren Cc: Mugunthan V N Cc: Richard Cochran Signed-off-by: Grygorii Strashko Acked-by: Mugunthan V N Acked-by: Tony Lindgren Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 1d5b4be..8491336 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11071,6 +11071,15 @@ S: Maintained F: drivers/clk/ti/ F: include/linux/clk/ti.h +TI ETHERNET SWITCH DRIVER (CPSW) +M: Mugunthan V N +R: Grygorii Strashko +L: linux-omap@vger.kernel.org +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/ethernet/ti/cpsw* +F: drivers/net/ethernet/ti/davinci* + TI FLASH MEDIA INTERFACE DRIVER M: Alex Dubov S: Maintained -- cgit v0.10.2 From 7ceb2afbd6aee4643056b47156baad6841db8e78 Mon Sep 17 00:00:00 2001 From: Elad Raz Date: Thu, 21 Apr 2016 12:52:43 +0200 Subject: switchdev: Adding complete operation to deferred switchdev ops When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/include/net/switchdev.h b/include/net/switchdev.h index d451122..51d77b2 100644 --- a/include/net/switchdev.h +++ b/include/net/switchdev.h @@ -54,6 +54,8 @@ struct switchdev_attr { struct net_device *orig_dev; enum switchdev_attr_id id; u32 flags; + void *complete_priv; + void (*complete)(struct net_device *dev, int err, void *priv); union { struct netdev_phys_item_id ppid; /* PORT_PARENT_ID */ u8 stp_state; /* PORT_STP_STATE */ @@ -75,6 +77,8 @@ struct switchdev_obj { struct net_device *orig_dev; enum switchdev_obj_id id; u32 flags; + void *complete_priv; + void (*complete)(struct net_device *dev, int err, void *priv); }; /* SWITCHDEV_OBJ_ID_PORT_VLAN */ diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index 2b9b98f..b7e01d8 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -305,6 +305,8 @@ static void switchdev_port_attr_set_deferred(struct net_device *dev, if (err && err != -EOPNOTSUPP) netdev_err(dev, "failed (err=%d) to set attribute (id=%d)\n", err, attr->id); + if (attr->complete) + attr->complete(dev, err, attr->complete_priv); } static int switchdev_port_attr_set_defer(struct net_device *dev, @@ -434,6 +436,8 @@ static void switchdev_port_obj_add_deferred(struct net_device *dev, if (err && err != -EOPNOTSUPP) netdev_err(dev, "failed (err=%d) to add object (id=%d)\n", err, obj->id); + if (obj->complete) + obj->complete(dev, err, obj->complete_priv); } static int switchdev_port_obj_add_defer(struct net_device *dev, @@ -502,6 +506,8 @@ static void switchdev_port_obj_del_deferred(struct net_device *dev, if (err && err != -EOPNOTSUPP) netdev_err(dev, "failed (err=%d) to del object (id=%d)\n", err, obj->id); + if (obj->complete) + obj->complete(dev, err, obj->complete_priv); } static int switchdev_port_obj_del_defer(struct net_device *dev, -- cgit v0.10.2 From 6dd684c0feb207f30180570bad24264b922d9476 Mon Sep 17 00:00:00 2001 From: Elad Raz Date: Thu, 21 Apr 2016 12:52:44 +0200 Subject: bridge: mdb: Common function for mdb entry translation There is duplicate code that translates br_mdb_entry to br_ip let's wrap it in a common function. Signed-off-by: Elad Raz Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c index 253bc77..b258120 100644 --- a/net/bridge/br_mdb.c +++ b/net/bridge/br_mdb.c @@ -61,6 +61,19 @@ static void __mdb_entry_fill_flags(struct br_mdb_entry *e, unsigned char flags) e->flags |= MDB_FLAGS_OFFLOAD; } +static void __mdb_entry_to_br_ip(struct br_mdb_entry *entry, struct br_ip *ip) +{ + memset(ip, 0, sizeof(struct br_ip)); + ip->vid = entry->vid; + ip->proto = entry->addr.proto; + if (ip->proto == htons(ETH_P_IP)) + ip->u.ip4 = entry->addr.u.ip4; +#if IS_ENABLED(CONFIG_IPV6) + else + ip->u.ip6 = entry->addr.u.ip6; +#endif +} + static int br_mdb_fill_info(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev) { @@ -509,15 +522,7 @@ static int __br_mdb_add(struct net *net, struct net_bridge *br, if (!p || p->br != br || p->state == BR_STATE_DISABLED) return -EINVAL; - memset(&ip, 0, sizeof(ip)); - ip.vid = entry->vid; - ip.proto = entry->addr.proto; - if (ip.proto == htons(ETH_P_IP)) - ip.u.ip4 = entry->addr.u.ip4; -#if IS_ENABLED(CONFIG_IPV6) - else - ip.u.ip6 = entry->addr.u.ip6; -#endif + __mdb_entry_to_br_ip(entry, &ip); spin_lock_bh(&br->multicast_lock); ret = br_mdb_add_group(br, p, &ip, entry->state, pg); @@ -584,15 +589,7 @@ static int __br_mdb_del(struct net_bridge *br, struct br_mdb_entry *entry) if (!netif_running(br->dev) || br->multicast_disabled) return -EINVAL; - memset(&ip, 0, sizeof(ip)); - ip.vid = entry->vid; - ip.proto = entry->addr.proto; - if (ip.proto == htons(ETH_P_IP)) - ip.u.ip4 = entry->addr.u.ip4; -#if IS_ENABLED(CONFIG_IPV6) - else - ip.u.ip6 = entry->addr.u.ip6; -#endif + __mdb_entry_to_br_ip(entry, &ip); spin_lock_bh(&br->multicast_lock); mdb = mlock_dereference(br->mdb, br); -- cgit v0.10.2 From 45ebcce56823d14d196dbdecd26783b3d5f464a6 Mon Sep 17 00:00:00 2001 From: Elad Raz Date: Thu, 21 Apr 2016 12:52:45 +0200 Subject: bridge: mdb: Marking port-group as offloaded There is a race-condition when updating the mdb offload flag without using the mulicast_lock. This reverts commit 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module"). This patch marks offloaded MDB entry as "offload" by changing the port- group flags and marks it as MDB_PG_FLAGS_OFFLOAD. When switchdev PORT_MDB succeeded and adds a multicast group, a completion callback is been invoked "br_mdb_complete". The completion function locks the multicast_lock and finds the right net_bridge_port_group and marks it as offloaded. Fixes: 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module") Reported-by: Nikolay Aleksandrov Signed-off-by: Elad Raz Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c index b258120..7dbc80d 100644 --- a/net/bridge/br_mdb.c +++ b/net/bridge/br_mdb.c @@ -256,9 +256,45 @@ static inline size_t rtnl_mdb_nlmsg_size(void) + nla_total_size(sizeof(struct br_mdb_entry)); } -static void __br_mdb_notify(struct net_device *dev, struct br_mdb_entry *entry, - int type, struct net_bridge_port_group *pg) +struct br_mdb_complete_info { + struct net_bridge_port *port; + struct br_ip ip; +}; + +static void br_mdb_complete(struct net_device *dev, int err, void *priv) { + struct br_mdb_complete_info *data = priv; + struct net_bridge_port_group __rcu **pp; + struct net_bridge_port_group *p; + struct net_bridge_mdb_htable *mdb; + struct net_bridge_mdb_entry *mp; + struct net_bridge_port *port = data->port; + struct net_bridge *br = port->br; + + if (err) + goto err; + + spin_lock_bh(&br->multicast_lock); + mdb = mlock_dereference(br->mdb, br); + mp = br_mdb_ip_get(mdb, &data->ip); + if (!mp) + goto out; + for (pp = &mp->ports; (p = mlock_dereference(*pp, br)) != NULL; + pp = &p->next) { + if (p->port != port) + continue; + p->flags |= MDB_PG_FLAGS_OFFLOAD; + } +out: + spin_unlock_bh(&br->multicast_lock); +err: + kfree(priv); +} + +static void __br_mdb_notify(struct net_device *dev, struct net_bridge_port *p, + struct br_mdb_entry *entry, int type) +{ + struct br_mdb_complete_info *complete_info; struct switchdev_obj_port_mdb mdb = { .obj = { .id = SWITCHDEV_OBJ_ID_PORT_MDB, @@ -281,9 +317,14 @@ static void __br_mdb_notify(struct net_device *dev, struct br_mdb_entry *entry, mdb.obj.orig_dev = port_dev; if (port_dev && type == RTM_NEWMDB) { - err = switchdev_port_obj_add(port_dev, &mdb.obj); - if (!err && pg) - pg->flags |= MDB_PG_FLAGS_OFFLOAD; + complete_info = kmalloc(sizeof(*complete_info), GFP_ATOMIC); + if (complete_info) { + complete_info->port = p; + __mdb_entry_to_br_ip(entry, &complete_info->ip); + mdb.obj.complete_priv = complete_info; + mdb.obj.complete = br_mdb_complete; + switchdev_port_obj_add(port_dev, &mdb.obj); + } } else if (port_dev && type == RTM_DELMDB) { switchdev_port_obj_del(port_dev, &mdb.obj); } @@ -304,21 +345,21 @@ errout: rtnl_set_sk_err(net, RTNLGRP_MDB, err); } -void br_mdb_notify(struct net_device *dev, struct net_bridge_port_group *pg, - int type) +void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port, + struct br_ip *group, int type, u8 flags) { struct br_mdb_entry entry; memset(&entry, 0, sizeof(entry)); - entry.ifindex = pg->port->dev->ifindex; - entry.addr.proto = pg->addr.proto; - entry.addr.u.ip4 = pg->addr.u.ip4; + entry.ifindex = port->dev->ifindex; + entry.addr.proto = group->proto; + entry.addr.u.ip4 = group->u.ip4; #if IS_ENABLED(CONFIG_IPV6) - entry.addr.u.ip6 = pg->addr.u.ip6; + entry.addr.u.ip6 = group->u.ip6; #endif - entry.vid = pg->addr.vid; - __mdb_entry_fill_flags(&entry, pg->flags); - __br_mdb_notify(dev, &entry, type, pg); + entry.vid = group->vid; + __mdb_entry_fill_flags(&entry, flags); + __br_mdb_notify(dev, port, &entry, type); } static int nlmsg_populate_rtr_fill(struct sk_buff *skb, @@ -463,8 +504,7 @@ static int br_mdb_parse(struct sk_buff *skb, struct nlmsghdr *nlh, } static int br_mdb_add_group(struct net_bridge *br, struct net_bridge_port *port, - struct br_ip *group, unsigned char state, - struct net_bridge_port_group **pg) + struct br_ip *group, unsigned char state) { struct net_bridge_mdb_entry *mp; struct net_bridge_port_group *p; @@ -495,7 +535,6 @@ static int br_mdb_add_group(struct net_bridge *br, struct net_bridge_port *port, if (unlikely(!p)) return -ENOMEM; rcu_assign_pointer(*pp, p); - *pg = p; if (state == MDB_TEMPORARY) mod_timer(&p->timer, now + br->multicast_membership_interval); @@ -503,8 +542,7 @@ static int br_mdb_add_group(struct net_bridge *br, struct net_bridge_port *port, } static int __br_mdb_add(struct net *net, struct net_bridge *br, - struct br_mdb_entry *entry, - struct net_bridge_port_group **pg) + struct br_mdb_entry *entry) { struct br_ip ip; struct net_device *dev; @@ -525,7 +563,7 @@ static int __br_mdb_add(struct net *net, struct net_bridge *br, __mdb_entry_to_br_ip(entry, &ip); spin_lock_bh(&br->multicast_lock); - ret = br_mdb_add_group(br, p, &ip, entry->state, pg); + ret = br_mdb_add_group(br, p, &ip, entry->state); spin_unlock_bh(&br->multicast_lock); return ret; } @@ -533,7 +571,6 @@ static int __br_mdb_add(struct net *net, struct net_bridge *br, static int br_mdb_add(struct sk_buff *skb, struct nlmsghdr *nlh) { struct net *net = sock_net(skb->sk); - struct net_bridge_port_group *pg; struct net_bridge_vlan_group *vg; struct net_device *dev, *pdev; struct br_mdb_entry *entry; @@ -563,15 +600,15 @@ static int br_mdb_add(struct sk_buff *skb, struct nlmsghdr *nlh) if (br_vlan_enabled(br) && vg && entry->vid == 0) { list_for_each_entry(v, &vg->vlan_list, vlist) { entry->vid = v->vid; - err = __br_mdb_add(net, br, entry, &pg); + err = __br_mdb_add(net, br, entry); if (err) break; - __br_mdb_notify(dev, entry, RTM_NEWMDB, pg); + __br_mdb_notify(dev, p, entry, RTM_NEWMDB); } } else { - err = __br_mdb_add(net, br, entry, &pg); + err = __br_mdb_add(net, br, entry); if (!err) - __br_mdb_notify(dev, entry, RTM_NEWMDB, pg); + __br_mdb_notify(dev, p, entry, RTM_NEWMDB); } return err; @@ -659,12 +696,12 @@ static int br_mdb_del(struct sk_buff *skb, struct nlmsghdr *nlh) entry->vid = v->vid; err = __br_mdb_del(br, entry); if (!err) - __br_mdb_notify(dev, entry, RTM_DELMDB, NULL); + __br_mdb_notify(dev, p, entry, RTM_DELMDB); } } else { err = __br_mdb_del(br, entry); if (!err) - __br_mdb_notify(dev, entry, RTM_DELMDB, NULL); + __br_mdb_notify(dev, p, entry, RTM_DELMDB); } return err; diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index a4c15df..191ea66 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -283,7 +283,8 @@ static void br_multicast_del_pg(struct net_bridge *br, rcu_assign_pointer(*pp, p->next); hlist_del_init(&p->mglist); del_timer(&p->timer); - br_mdb_notify(br->dev, p, RTM_DELMDB); + br_mdb_notify(br->dev, p->port, &pg->addr, RTM_DELMDB, + p->flags); call_rcu_bh(&p->rcu, br_multicast_free_pg); if (!mp->ports && !mp->mglist && @@ -705,7 +706,7 @@ static int br_multicast_add_group(struct net_bridge *br, if (unlikely(!p)) goto err; rcu_assign_pointer(*pp, p); - br_mdb_notify(br->dev, p, RTM_NEWMDB); + br_mdb_notify(br->dev, port, group, RTM_NEWMDB, 0); found: mod_timer(&p->timer, now + br->multicast_membership_interval); @@ -1461,7 +1462,8 @@ br_multicast_leave_group(struct net_bridge *br, hlist_del_init(&p->mglist); del_timer(&p->timer); call_rcu_bh(&p->rcu, br_multicast_free_pg); - br_mdb_notify(br->dev, p, RTM_DELMDB); + br_mdb_notify(br->dev, port, group, RTM_DELMDB, + p->flags); if (!mp->ports && !mp->mglist && netif_running(br->dev)) diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 1b5d145..d9da857 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -560,8 +560,8 @@ br_multicast_new_port_group(struct net_bridge_port *port, struct br_ip *group, unsigned char flags); void br_mdb_init(void); void br_mdb_uninit(void); -void br_mdb_notify(struct net_device *dev, struct net_bridge_port_group *pg, - int type); +void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port, + struct br_ip *group, int type, u8 flags); void br_rtr_notify(struct net_device *dev, struct net_bridge_port *port, int type); -- cgit v0.10.2 From 72f2a05b8f367ee0d75584a6fbec7dbe7c144f27 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:01 +0200 Subject: macsec: add missing NULL check after kmalloc Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Dan Carpenter Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 84d3e5c..f691030 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -1622,8 +1622,8 @@ static int macsec_add_rxsa(struct sk_buff *skb, struct genl_info *info) } rx_sa = kmalloc(sizeof(*rx_sa), GFP_KERNEL); - if (init_rx_sa(rx_sa, nla_data(tb_sa[MACSEC_SA_ATTR_KEY]), secy->key_len, - secy->icv_len)) { + if (!rx_sa || init_rx_sa(rx_sa, nla_data(tb_sa[MACSEC_SA_ATTR_KEY]), + secy->key_len, secy->icv_len)) { rtnl_unlock(); return -ENOMEM; } -- cgit v0.10.2 From c10c63ea739bce3b8a6ab85c7bb472d900c9b070 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:02 +0200 Subject: macsec: take rtnl lock before for_each_netdev Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Johannes Berg Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index f691030..5f3ea80 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -2268,8 +2268,6 @@ static int dump_secy(struct macsec_secy *secy, struct net_device *dev, if (!hdr) return -EMSGSIZE; - rtnl_lock(); - if (nla_put_u32(skb, MACSEC_ATTR_IFINDEX, dev->ifindex)) goto nla_put_failure; @@ -2429,14 +2427,11 @@ static int dump_secy(struct macsec_secy *secy, struct net_device *dev, nla_nest_end(skb, rxsc_list); - rtnl_unlock(); - genlmsg_end(skb, hdr); return 0; nla_put_failure: - rtnl_unlock(); genlmsg_cancel(skb, hdr); return -EMSGSIZE; } @@ -2450,6 +2445,7 @@ static int macsec_dump_txsc(struct sk_buff *skb, struct netlink_callback *cb) dev_idx = cb->args[0]; d = 0; + rtnl_lock(); for_each_netdev(net, dev) { struct macsec_secy *secy; @@ -2467,6 +2463,7 @@ next: } done: + rtnl_unlock(); cb->args[0] = d; return skb->len; } -- cgit v0.10.2 From 497f358aa4c0d99b75ec204407389920d5e33ec5 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:03 +0200 Subject: macsec: don't put a NULL rxsa The "deliver:" path of macsec_handle_frame can be called with rx_sa == NULL. Check rx_sa != NULL before calling macsec_rxsa_put(). Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 5f3ea80..2a2136b 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -1161,7 +1161,8 @@ deliver: macsec_extra_len(macsec_skb_cb(skb)->has_sci)); macsec_reset_skb(skb, secy->netdev); - macsec_rxsa_put(rx_sa); + if (rx_sa) + macsec_rxsa_put(rx_sa); count_rx(dev, skb->len); rcu_read_unlock(); -- cgit v0.10.2 From c3b7d0bd7ac2c501d4806db71ddd383c184968e8 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:04 +0200 Subject: macsec: fix rx_sa refcounting with decrypt callback The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 2a2136b..1fd2b14 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -880,12 +880,12 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, macsec_skb_cb(skb)->valid = false; skb = skb_share_check(skb, GFP_ATOMIC); if (!skb) - return NULL; + return ERR_PTR(-ENOMEM); req = aead_request_alloc(rx_sa->key.tfm, GFP_ATOMIC); if (!req) { kfree_skb(skb); - return NULL; + return ERR_PTR(-ENOMEM); } hdr = (struct macsec_eth_header *)skb->data; @@ -905,7 +905,7 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, skb = skb_unshare(skb, GFP_ATOMIC); if (!skb) { aead_request_free(req); - return NULL; + return ERR_PTR(-ENOMEM); } } else { /* integrity only: all headers + data authenticated */ @@ -921,14 +921,14 @@ static struct sk_buff *macsec_decrypt(struct sk_buff *skb, dev_hold(dev); ret = crypto_aead_decrypt(req); if (ret == -EINPROGRESS) { - return NULL; + return ERR_PTR(ret); } else if (ret != 0) { /* decryption/authentication failed * 10.6 if validateFrames is disabled, deliver anyway */ if (ret != -EBADMSG) { kfree_skb(skb); - skb = NULL; + skb = ERR_PTR(ret); } } else { macsec_skb_cb(skb)->valid = true; @@ -1146,8 +1146,10 @@ static rx_handler_result_t macsec_handle_frame(struct sk_buff **pskb) secy->validate_frames != MACSEC_VALIDATE_DISABLED) skb = macsec_decrypt(skb, dev, rx_sa, sci, secy); - if (!skb) { - macsec_rxsa_put(rx_sa); + if (IS_ERR(skb)) { + /* the decrypt callback needs the reference */ + if (PTR_ERR(skb) != -EINPROGRESS) + macsec_rxsa_put(rx_sa); rcu_read_unlock(); *pskb = NULL; return RX_HANDLER_CONSUMED; -- cgit v0.10.2 From 96cfc5052c5d434563873caa7707b32b9e389b16 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:05 +0200 Subject: macsec: add consistency check to netlink dumps Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 1fd2b14..41fbe55 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -2271,6 +2271,8 @@ static int dump_secy(struct macsec_secy *secy, struct net_device *dev, if (!hdr) return -EMSGSIZE; + genl_dump_check_consistent(cb, hdr, &macsec_fam); + if (nla_put_u32(skb, MACSEC_ATTR_IFINDEX, dev->ifindex)) goto nla_put_failure; @@ -2439,6 +2441,8 @@ nla_put_failure: return -EMSGSIZE; } +static int macsec_generation = 1; /* protected by RTNL */ + static int macsec_dump_txsc(struct sk_buff *skb, struct netlink_callback *cb) { struct net *net = sock_net(skb->sk); @@ -2449,6 +2453,9 @@ static int macsec_dump_txsc(struct sk_buff *skb, struct netlink_callback *cb) d = 0; rtnl_lock(); + + cb->seq = macsec_generation; + for_each_netdev(net, dev) { struct macsec_secy *secy; @@ -2920,6 +2927,8 @@ static void macsec_dellink(struct net_device *dev, struct list_head *head) struct net_device *real_dev = macsec->real_dev; struct macsec_rxh_data *rxd = macsec_data_rtnl(real_dev); + macsec_generation++; + unregister_netdevice_queue(dev, head); list_del_rcu(&macsec->secys); if (list_empty(&rxd->secys)) @@ -3066,6 +3075,8 @@ static int macsec_newlink(struct net *net, struct net_device *dev, if (err < 0) goto del_dev; + macsec_generation++; + dev_hold(real_dev); return 0; -- cgit v0.10.2 From 960d5848dbf1245cc3a310109897937207411c0c Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:06 +0200 Subject: macsec: fix memory leaks around rx_handler (un)registration We leak a struct macsec_rxh_data when we unregister the rx_handler in macsec_dellink. We also leak a struct macsec_rxh_data in register_macsec_dev if we fail to register the rx_handler. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 41fbe55..826c6c9 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -2931,8 +2931,10 @@ static void macsec_dellink(struct net_device *dev, struct list_head *head) unregister_netdevice_queue(dev, head); list_del_rcu(&macsec->secys); - if (list_empty(&rxd->secys)) + if (list_empty(&rxd->secys)) { netdev_rx_handler_unregister(real_dev); + kfree(rxd); + } macsec_del_dev(macsec); } @@ -2954,8 +2956,10 @@ static int register_macsec_dev(struct net_device *real_dev, err = netdev_rx_handler_register(real_dev, macsec_handle_frame, rxd); - if (err < 0) + if (err < 0) { + kfree(rxd); return err; + } } list_add_tail_rcu(&macsec->secys, &rxd->secys); -- cgit v0.10.2 From 38787fc209580f9b5918e93e71da7c960dbb5d8d Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:07 +0200 Subject: macsec: fix SA leak if initialization fails Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Lance Richardson Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 826c6c9..b37d348 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -1627,6 +1627,7 @@ static int macsec_add_rxsa(struct sk_buff *skb, struct genl_info *info) rx_sa = kmalloc(sizeof(*rx_sa), GFP_KERNEL); if (!rx_sa || init_rx_sa(rx_sa, nla_data(tb_sa[MACSEC_SA_ATTR_KEY]), secy->key_len, secy->icv_len)) { + kfree(rx_sa); rtnl_unlock(); return -ENOMEM; } @@ -1771,6 +1772,7 @@ static int macsec_add_txsa(struct sk_buff *skb, struct genl_info *info) tx_sa = kmalloc(sizeof(*tx_sa), GFP_KERNEL); if (!tx_sa || init_tx_sa(tx_sa, nla_data(tb_sa[MACSEC_SA_ATTR_KEY]), secy->key_len, secy->icv_len)) { + kfree(tx_sa); rtnl_unlock(); return -ENOMEM; } -- cgit v0.10.2 From 748164802c1bd2c52937d20782b07d8c68dd9a4f Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:08 +0200 Subject: macsec: add missing macsec prefix in uapi I accidentally forgot some MACSEC_ prefixes in if_macsec.h. Fixes: dece8d2b78d1 ("uapi: add MACsec bits") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index b37d348..9f63cc7 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -2232,7 +2232,8 @@ static int nla_put_secy(struct macsec_secy *secy, struct sk_buff *skb) return 1; if (nla_put_sci(skb, MACSEC_SECY_ATTR_SCI, secy->sci) || - nla_put_u64(skb, MACSEC_SECY_ATTR_CIPHER_SUITE, DEFAULT_CIPHER_ID) || + nla_put_u64(skb, MACSEC_SECY_ATTR_CIPHER_SUITE, + MACSEC_DEFAULT_CIPHER_ID) || nla_put_u8(skb, MACSEC_SECY_ATTR_ICV_LEN, secy->icv_len) || nla_put_u8(skb, MACSEC_SECY_ATTR_OPER, secy->operational) || nla_put_u8(skb, MACSEC_SECY_ATTR_PROTECT, secy->protect_frames) || @@ -3096,7 +3097,7 @@ unregister: static int macsec_validate_attr(struct nlattr *tb[], struct nlattr *data[]) { - u64 csid = DEFAULT_CIPHER_ID; + u64 csid = MACSEC_DEFAULT_CIPHER_ID; u8 icv_len = DEFAULT_ICV_LEN; int flag; bool es, scb, sci; @@ -3111,8 +3112,8 @@ static int macsec_validate_attr(struct nlattr *tb[], struct nlattr *data[]) icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]); switch (csid) { - case DEFAULT_CIPHER_ID: - case DEFAULT_CIPHER_ALT: + case MACSEC_DEFAULT_CIPHER_ID: + case MACSEC_DEFAULT_CIPHER_ALT: if (icv_len < MACSEC_MIN_ICV_LEN || icv_len > MACSEC_MAX_ICV_LEN) return -EINVAL; @@ -3185,7 +3186,8 @@ static int macsec_fill_info(struct sk_buff *skb, if (nla_put_sci(skb, IFLA_MACSEC_SCI, secy->sci) || nla_put_u8(skb, IFLA_MACSEC_ICV_LEN, secy->icv_len) || - nla_put_u64(skb, IFLA_MACSEC_CIPHER_SUITE, DEFAULT_CIPHER_ID) || + nla_put_u64(skb, IFLA_MACSEC_CIPHER_SUITE, + MACSEC_DEFAULT_CIPHER_ID) || nla_put_u8(skb, IFLA_MACSEC_ENCODING_SA, tx_sc->encoding_sa) || nla_put_u8(skb, IFLA_MACSEC_ENCRYPT, tx_sc->encrypt) || nla_put_u8(skb, IFLA_MACSEC_PROTECT, secy->protect_frames) || diff --git a/include/uapi/linux/if_macsec.h b/include/uapi/linux/if_macsec.h index 26b0d1e..4c58d99 100644 --- a/include/uapi/linux/if_macsec.h +++ b/include/uapi/linux/if_macsec.h @@ -19,8 +19,8 @@ #define MACSEC_MAX_KEY_LEN 128 -#define DEFAULT_CIPHER_ID 0x0080020001000001ULL -#define DEFAULT_CIPHER_ALT 0x0080C20001000001ULL +#define MACSEC_DEFAULT_CIPHER_ID 0x0080020001000001ULL +#define MACSEC_DEFAULT_CIPHER_ALT 0x0080C20001000001ULL #define MACSEC_MIN_ICV_LEN 8 #define MACSEC_MAX_ICV_LEN 32 -- cgit v0.10.2 From 4b1fb9352f351faa067a914907d58a6fe38ac048 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 22 Apr 2016 11:28:09 +0200 Subject: macsec: fix netlink attribute validation macsec_validate_attr should check IFLA_MACSEC_REPLAY_PROTECT (not IFLA_MACSEC_PROTECT) to verify that the replay protection and replay window arguments are correct. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 9f63cc7..c638561 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3147,8 +3147,8 @@ static int macsec_validate_attr(struct nlattr *tb[], struct nlattr *data[]) nla_get_u8(data[IFLA_MACSEC_VALIDATION]) > MACSEC_VALIDATE_MAX) return -EINVAL; - if ((data[IFLA_MACSEC_PROTECT] && - nla_get_u8(data[IFLA_MACSEC_PROTECT])) && + if ((data[IFLA_MACSEC_REPLAY_PROTECT] && + nla_get_u8(data[IFLA_MACSEC_REPLAY_PROTECT])) && !data[IFLA_MACSEC_WINDOW]) return -EINVAL; -- cgit v0.10.2 From 3c201b5a84edd6ee2f9a8548efaa813980839b46 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 21 Apr 2016 14:11:50 +0200 Subject: net: stmmac: socfpga: Remove re-registration of reset controller Both socfpga_dwmac_parse_data() in dwmac-socfpga.c and stmmac_dvr_probe() in stmmac_main.c functions call devm_reset_control_get() to register an reset controller for the stmmac. This results in an attempt to register two reset controllers for the same non-shared reset line. The first attempt to register the reset controller works fine. The second attempt fails with warning from the reset controller core, see below. The warning is produced because the reset line is non-shared and thus it is allowed to have only up-to one reset controller associated with that reset line, not two or more. The solution has multiple parts. First, the original socfpga_dwmac_init() is tweaked to use reset controller pointer from the stmmac_priv (private data of the stmmac core) instead of the local instance, which was used before. The local re-registration of the reset controller is removed. Next, the socfpga_dwmac_init() is moved after stmmac_dvr_probe() in the probe function. This order is legal according to Altera and it makes the code much easier, since there is no need to temporarily register and unregister the reset controller ; the reset controller is already registered by the stmmac_dvr_probe(). Finally, plat_dat->exit and socfpga_dwmac_exit() is no longer necessary, since the functionality is already performed by the stmmac core. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x218/0x270 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc4-next-20160419-00015-gabb2477-dirty #4 Hardware name: Altera SOCFPGA [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x94/0xa8) [] (dump_stack) from [] (__warn+0xec/0x104) [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [] (warn_slowpath_null) from [] (__of_reset_control_get+0x218/0x270) [] (__of_reset_control_get) from [] (__devm_reset_control_get+0x54/0x90) [] (__devm_reset_control_get) from [] (stmmac_dvr_probe+0x1b4/0x8e8) [] (stmmac_dvr_probe) from [] (socfpga_dwmac_probe+0x1b8/0x28c) [] (socfpga_dwmac_probe) from [] (platform_drv_probe+0x4c/0xb0) [] (platform_drv_probe) from [] (driver_probe_device+0x224/0x2bc) [] (driver_probe_device) from [] (__driver_attach+0xac/0xb0) [] (__driver_attach) from [] (bus_for_each_dev+0x6c/0xa0) [] (bus_for_each_dev) from [] (bus_add_driver+0x1a4/0x21c) [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [] (driver_register) from [] (do_one_initcall+0x40/0x170) [] (do_one_initcall) from [] (kernel_init_freeable+0x1dc/0x27c) [] (kernel_init_freeable) from [] (kernel_init+0x8/0x114) [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) ---[ end trace 059d2fbe87608fa9 ]--- Signed-off-by: Marek Vasut Cc: Matthew Gerlach Cc: Dinh Nguyen Cc: David S. Miller Tested-by: Dinh Nguyen Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index 44022b1..afb90d1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -49,7 +49,6 @@ struct socfpga_dwmac { u32 reg_shift; struct device *dev; struct regmap *sys_mgr_base_addr; - struct reset_control *stmmac_rst; void __iomem *splitter_base; bool f2h_ptp_ref_clk; }; @@ -92,15 +91,6 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device * struct device_node *np_splitter; struct resource res_splitter; - dwmac->stmmac_rst = devm_reset_control_get(dev, - STMMAC_RESOURCE_NAME); - if (IS_ERR(dwmac->stmmac_rst)) { - dev_info(dev, "Could not get reset control!\n"); - if (PTR_ERR(dwmac->stmmac_rst) == -EPROBE_DEFER) - return -EPROBE_DEFER; - dwmac->stmmac_rst = NULL; - } - dwmac->interface = of_get_phy_mode(np); sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon"); @@ -194,30 +184,23 @@ static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac) return 0; } -static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv) -{ - struct socfpga_dwmac *dwmac = priv; - - /* On socfpga platform exit, assert and hold reset to the - * enet controller - the default state after a hard reset. - */ - if (dwmac->stmmac_rst) - reset_control_assert(dwmac->stmmac_rst); -} - static int socfpga_dwmac_init(struct platform_device *pdev, void *priv) { - struct socfpga_dwmac *dwmac = priv; + struct socfpga_dwmac *dwmac = priv; struct net_device *ndev = platform_get_drvdata(pdev); struct stmmac_priv *stpriv = NULL; int ret = 0; - if (ndev) - stpriv = netdev_priv(ndev); + if (!ndev) + return -EINVAL; + + stpriv = netdev_priv(ndev); + if (!stpriv) + return -EINVAL; /* Assert reset to the enet controller before changing the phy mode */ - if (dwmac->stmmac_rst) - reset_control_assert(dwmac->stmmac_rst); + if (stpriv->stmmac_rst) + reset_control_assert(stpriv->stmmac_rst); /* Setup the phy mode in the system manager registers according to * devicetree configuration @@ -227,8 +210,8 @@ static int socfpga_dwmac_init(struct platform_device *pdev, void *priv) /* Deassert reset for the phy configuration to be sampled by * the enet controller, and operation to start in requested mode */ - if (dwmac->stmmac_rst) - reset_control_deassert(dwmac->stmmac_rst); + if (stpriv->stmmac_rst) + reset_control_deassert(stpriv->stmmac_rst); /* Before the enet controller is suspended, the phy is suspended. * This causes the phy clock to be gated. The enet controller is @@ -245,7 +228,7 @@ static int socfpga_dwmac_init(struct platform_device *pdev, void *priv) * control register 0, and can be modified by the phy driver * framework. */ - if (stpriv && stpriv->phydev) + if (stpriv->phydev) phy_resume(stpriv->phydev); return ret; @@ -285,14 +268,13 @@ static int socfpga_dwmac_probe(struct platform_device *pdev) plat_dat->bsp_priv = dwmac; plat_dat->init = socfpga_dwmac_init; - plat_dat->exit = socfpga_dwmac_exit; plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed; - ret = socfpga_dwmac_init(pdev, plat_dat->bsp_priv); - if (ret) - return ret; + ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); + if (!ret) + ret = socfpga_dwmac_init(pdev, dwmac); - return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); + return ret; } static const struct of_device_id socfpga_dwmac_match[] = { -- cgit v0.10.2 From 45c78e0219405af1b0f31b06952dfd9bcf7ad1f6 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 21 Apr 2016 13:25:20 -0400 Subject: qlcnic: Update version to 5.3.64 Just updating the version as many fixes got accumulated over 5.3.63 Signed-off-by: Manish Chopra Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 55007f1..caf6ddb 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -37,8 +37,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 3 -#define _QLCNIC_LINUX_SUBVERSION 63 -#define QLCNIC_LINUX_VERSIONID "5.3.63" +#define _QLCNIC_LINUX_SUBVERSION 64 +#define QLCNIC_LINUX_VERSIONID "5.3.64" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) -- cgit v0.10.2 From c3f9bf628bc7edda298897d952f5e761137229c9 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Fri, 22 Apr 2016 00:33:00 +0300 Subject: net/mlx5_core: Fix soft lockup in steering error flow In the error flow of adding flow rule to auto-grouped flow table, we call to tree_remove_node. tree_remove_node locks the node's parent, however the node's parent is already locked by mlx5_add_flow_rule and this causes a deadlock. After this patch, if we failed to add the flow rule, we unlock the flow table before calling to tree_remove_node. fixes: f0d22d187473 ('net/mlx5_core: Introduce flow steering autogrouped flow table') Signed-off-by: Maor Gottlieb Reported-by: Amir Vadai Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 5121be4..3c7e3e5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1065,33 +1065,6 @@ unlock_fg: return rule; } -static struct mlx5_flow_rule *add_rule_to_auto_fg(struct mlx5_flow_table *ft, - u8 match_criteria_enable, - u32 *match_criteria, - u32 *match_value, - u8 action, - u32 flow_tag, - struct mlx5_flow_destination *dest) -{ - struct mlx5_flow_rule *rule; - struct mlx5_flow_group *g; - - g = create_autogroup(ft, match_criteria_enable, match_criteria); - if (IS_ERR(g)) - return (void *)g; - - rule = add_rule_fg(g, match_value, - action, flow_tag, dest); - if (IS_ERR(rule)) { - /* Remove assumes refcount > 0 and autogroup creates a group - * with a refcount = 0. - */ - tree_get_node(&g->node); - tree_remove_node(&g->node); - } - return rule; -} - static struct mlx5_flow_rule * _mlx5_add_flow_rule(struct mlx5_flow_table *ft, u8 match_criteria_enable, @@ -1119,8 +1092,23 @@ _mlx5_add_flow_rule(struct mlx5_flow_table *ft, goto unlock; } - rule = add_rule_to_auto_fg(ft, match_criteria_enable, match_criteria, - match_value, action, flow_tag, dest); + g = create_autogroup(ft, match_criteria_enable, match_criteria); + if (IS_ERR(g)) { + rule = (void *)g; + goto unlock; + } + + rule = add_rule_fg(g, match_value, + action, flow_tag, dest); + if (IS_ERR(rule)) { + /* Remove assumes refcount > 0 and autogroup creates a group + * with a refcount = 0. + */ + unlock_ref_node(&ft->node); + tree_get_node(&g->node); + tree_remove_node(&g->node); + return rule; + } unlock: unlock_ref_node(&ft->node); return rule; -- cgit v0.10.2 From 6e4c21894673baabdbef03c3ac2458a28246128b Mon Sep 17 00:00:00 2001 From: Rana Shahout Date: Fri, 22 Apr 2016 00:33:01 +0300 Subject: net/mlx5e: Fix MLX5E_100BASE_T define Bit 25 of eth_proto_capability in PTYS register is 1000Base-TT and not 100Base-T. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Rana Shahout Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 879e627..e80ce94 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -609,7 +609,7 @@ enum mlx5e_link_mode { MLX5E_100GBASE_KR4 = 22, MLX5E_100GBASE_LR4 = 23, MLX5E_100BASE_TX = 24, - MLX5E_100BASE_T = 25, + MLX5E_1000BASE_T = 25, MLX5E_10GBASE_T = 26, MLX5E_25GBASE_CR = 27, MLX5E_25GBASE_KR = 28, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 68834b7..3476ab8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -138,10 +138,10 @@ static const struct { [MLX5E_100BASE_TX] = { .speed = 100, }, - [MLX5E_100BASE_T] = { - .supported = SUPPORTED_100baseT_Full, - .advertised = ADVERTISED_100baseT_Full, - .speed = 100, + [MLX5E_1000BASE_T] = { + .supported = SUPPORTED_1000baseT_Full, + .advertised = ADVERTISED_1000baseT_Full, + .speed = 1000, }, [MLX5E_10GBASE_T] = { .supported = SUPPORTED_10000baseT_Full, -- cgit v0.10.2 From 64dbbdfef245f67504ec403a5aebfcc7b92bd8c1 Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Fri, 22 Apr 2016 00:33:02 +0300 Subject: net/mlx5_core: Add ConnectX-5 to list of supported devices Add the upcoming ConnectX-5 devices (PF and VF) to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 3f3b2fa..ddd352a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1459,6 +1459,8 @@ static const struct pci_device_id mlx5_core_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x1014), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4 VF */ { PCI_VDEVICE(MELLANOX, 0x1015) }, /* ConnectX-4LX */ { PCI_VDEVICE(MELLANOX, 0x1016), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4LX VF */ + { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5 */ + { PCI_VDEVICE(MELLANOX, 0x1018), MLX5_PCI_DEV_IS_VF}, /* ConnectX-5 VF */ { 0, } }; -- cgit v0.10.2 From 046339eaab26804f52f6604877f5674f70815b26 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 22 Apr 2016 00:33:03 +0300 Subject: net/mlx5e: Device's mtu field is u16 and not int For set/query MTU port firmware commands the MTU field is 16 bits, here I changed all the "int mtu" parameters of the functions wrapping those firmware commands to be u16. Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 5acf346..99eb1c1 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -671,8 +671,8 @@ static int mlx5_query_hca_port(struct ib_device *ibdev, u8 port, struct mlx5_ib_dev *dev = to_mdev(ibdev); struct mlx5_core_dev *mdev = dev->mdev; struct mlx5_hca_vport_context *rep; - int max_mtu; - int oper_mtu; + u16 max_mtu; + u16 oper_mtu; int err; u8 ib_link_width_oper; u8 vl_hw_cap; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index e0adb60..2fbbc62 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1408,7 +1408,7 @@ static int mlx5e_set_dev_port_mtu(struct net_device *netdev) { struct mlx5e_priv *priv = netdev_priv(netdev); struct mlx5_core_dev *mdev = priv->mdev; - int hw_mtu; + u16 hw_mtu; int err; err = mlx5_set_port_mtu(mdev, MLX5E_SW2HW_MTU(netdev->mtu), 1); @@ -2004,7 +2004,7 @@ static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu) struct mlx5e_priv *priv = netdev_priv(netdev); struct mlx5_core_dev *mdev = priv->mdev; bool was_opened; - int max_mtu; + u16 max_mtu; int err = 0; mlx5_query_port_max_mtu(mdev, &max_mtu, 1); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index ae378c5..53cc1e2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -247,8 +247,8 @@ int mlx5_query_port_admin_status(struct mlx5_core_dev *dev, } EXPORT_SYMBOL_GPL(mlx5_query_port_admin_status); -static void mlx5_query_port_mtu(struct mlx5_core_dev *dev, int *admin_mtu, - int *max_mtu, int *oper_mtu, u8 port) +static void mlx5_query_port_mtu(struct mlx5_core_dev *dev, u16 *admin_mtu, + u16 *max_mtu, u16 *oper_mtu, u8 port) { u32 in[MLX5_ST_SZ_DW(pmtu_reg)]; u32 out[MLX5_ST_SZ_DW(pmtu_reg)]; @@ -268,7 +268,7 @@ static void mlx5_query_port_mtu(struct mlx5_core_dev *dev, int *admin_mtu, *admin_mtu = MLX5_GET(pmtu_reg, out, admin_mtu); } -int mlx5_set_port_mtu(struct mlx5_core_dev *dev, int mtu, u8 port) +int mlx5_set_port_mtu(struct mlx5_core_dev *dev, u16 mtu, u8 port) { u32 in[MLX5_ST_SZ_DW(pmtu_reg)]; u32 out[MLX5_ST_SZ_DW(pmtu_reg)]; @@ -283,14 +283,14 @@ int mlx5_set_port_mtu(struct mlx5_core_dev *dev, int mtu, u8 port) } EXPORT_SYMBOL_GPL(mlx5_set_port_mtu); -void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, int *max_mtu, +void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, u16 *max_mtu, u8 port) { mlx5_query_port_mtu(dev, NULL, max_mtu, NULL, port); } EXPORT_SYMBOL_GPL(mlx5_query_port_max_mtu); -void mlx5_query_port_oper_mtu(struct mlx5_core_dev *dev, int *oper_mtu, +void mlx5_query_port_oper_mtu(struct mlx5_core_dev *dev, u16 *oper_mtu, u8 port) { mlx5_query_port_mtu(dev, NULL, NULL, oper_mtu, port); diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h index a1d145a..b30250a 100644 --- a/include/linux/mlx5/port.h +++ b/include/linux/mlx5/port.h @@ -54,9 +54,9 @@ int mlx5_set_port_admin_status(struct mlx5_core_dev *dev, int mlx5_query_port_admin_status(struct mlx5_core_dev *dev, enum mlx5_port_status *status); -int mlx5_set_port_mtu(struct mlx5_core_dev *dev, int mtu, u8 port); -void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, int *max_mtu, u8 port); -void mlx5_query_port_oper_mtu(struct mlx5_core_dev *dev, int *oper_mtu, +int mlx5_set_port_mtu(struct mlx5_core_dev *dev, u16 mtu, u8 port); +void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, u16 *max_mtu, u8 port); +void mlx5_query_port_oper_mtu(struct mlx5_core_dev *dev, u16 *oper_mtu, u8 port); int mlx5_query_port_vl_hw_cap(struct mlx5_core_dev *dev, -- cgit v0.10.2 From d8edd2469ace550db707798180d1c84d81f93bca Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 22 Apr 2016 00:33:04 +0300 Subject: net/mlx5e: Fix minimum MTU Minimum MTU that can be set in Connectx4 device is 68. This fixes the case where a user wants to set invalid MTU, the driver will fail to satisfy this request and the interface will stay down. It is better to report an error and continue working with old mtu. Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 2fbbc62..93e4ef4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1999,22 +1999,27 @@ static int mlx5e_set_features(struct net_device *netdev, return err; } +#define MXL5_HW_MIN_MTU 64 +#define MXL5E_MIN_MTU (MXL5_HW_MIN_MTU + ETH_FCS_LEN) + static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu) { struct mlx5e_priv *priv = netdev_priv(netdev); struct mlx5_core_dev *mdev = priv->mdev; bool was_opened; u16 max_mtu; + u16 min_mtu; int err = 0; mlx5_query_port_max_mtu(mdev, &max_mtu, 1); max_mtu = MLX5E_HW2SW_MTU(max_mtu); + min_mtu = MLX5E_HW2SW_MTU(MXL5E_MIN_MTU); - if (new_mtu > max_mtu) { + if (new_mtu > max_mtu || new_mtu < min_mtu) { netdev_err(netdev, - "%s: Bad MTU (%d) > (%d) Max\n", - __func__, new_mtu, max_mtu); + "%s: Bad MTU (%d), valid range is: [%d..%d]\n", + __func__, new_mtu, min_mtu, max_mtu); return -EINVAL; } -- cgit v0.10.2 From cd255efff9baadd654d6160e52d17ae7c568c9d3 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 22 Apr 2016 00:33:05 +0300 Subject: net/mlx5e: Use vport MTU rather than physical port MTU Set and report vport MTU rather than physical MTU, Driver will set both vport and physical port mtu and will rely on the query of vport mtu. SRIOV VFs have to report their MTU to their vport manager (PF), and this will allow them to work with any MTU they need without failing the request. Also for some cases where the PF is not a port owner, PF can work with MTU less than the physical port mtu if set physical port mtu didn't take effect. Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 93e4ef4..85773f8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1404,24 +1404,50 @@ static int mlx5e_refresh_tirs_self_loopback_enable(struct mlx5e_priv *priv) return 0; } -static int mlx5e_set_dev_port_mtu(struct net_device *netdev) +static int mlx5e_set_mtu(struct mlx5e_priv *priv, u16 mtu) { - struct mlx5e_priv *priv = netdev_priv(netdev); struct mlx5_core_dev *mdev = priv->mdev; - u16 hw_mtu; + u16 hw_mtu = MLX5E_SW2HW_MTU(mtu); int err; - err = mlx5_set_port_mtu(mdev, MLX5E_SW2HW_MTU(netdev->mtu), 1); + err = mlx5_set_port_mtu(mdev, hw_mtu, 1); if (err) return err; - mlx5_query_port_oper_mtu(mdev, &hw_mtu, 1); + /* Update vport context MTU */ + mlx5_modify_nic_vport_mtu(mdev, hw_mtu); + return 0; +} + +static void mlx5e_query_mtu(struct mlx5e_priv *priv, u16 *mtu) +{ + struct mlx5_core_dev *mdev = priv->mdev; + u16 hw_mtu = 0; + int err; + + err = mlx5_query_nic_vport_mtu(mdev, &hw_mtu); + if (err || !hw_mtu) /* fallback to port oper mtu */ + mlx5_query_port_oper_mtu(mdev, &hw_mtu, 1); + + *mtu = MLX5E_HW2SW_MTU(hw_mtu); +} + +static int mlx5e_set_dev_port_mtu(struct net_device *netdev) +{ + struct mlx5e_priv *priv = netdev_priv(netdev); + u16 mtu; + int err; + + err = mlx5e_set_mtu(priv, netdev->mtu); + if (err) + return err; - if (MLX5E_HW2SW_MTU(hw_mtu) != netdev->mtu) - netdev_warn(netdev, "%s: Port MTU %d is different than netdev mtu %d\n", - __func__, MLX5E_HW2SW_MTU(hw_mtu), netdev->mtu); + mlx5e_query_mtu(priv, &mtu); + if (mtu != netdev->mtu) + netdev_warn(netdev, "%s: VPort MTU %d is different than netdev mtu %d\n", + __func__, mtu, netdev->mtu); - netdev->mtu = MLX5E_HW2SW_MTU(hw_mtu); + netdev->mtu = mtu; return 0; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c index bd51840..b69dadc 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c @@ -196,6 +196,46 @@ int mlx5_modify_nic_vport_mac_address(struct mlx5_core_dev *mdev, } EXPORT_SYMBOL_GPL(mlx5_modify_nic_vport_mac_address); +int mlx5_query_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 *mtu) +{ + int outlen = MLX5_ST_SZ_BYTES(query_nic_vport_context_out); + u32 *out; + int err; + + out = mlx5_vzalloc(outlen); + if (!out) + return -ENOMEM; + + err = mlx5_query_nic_vport_context(mdev, 0, out, outlen); + if (!err) + *mtu = MLX5_GET(query_nic_vport_context_out, out, + nic_vport_context.mtu); + + kvfree(out); + return err; +} +EXPORT_SYMBOL_GPL(mlx5_query_nic_vport_mtu); + +int mlx5_modify_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 mtu) +{ + int inlen = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in); + void *in; + int err; + + in = mlx5_vzalloc(inlen); + if (!in) + return -ENOMEM; + + MLX5_SET(modify_nic_vport_context_in, in, field_select.mtu, 1); + MLX5_SET(modify_nic_vport_context_in, in, nic_vport_context.mtu, mtu); + + err = mlx5_modify_nic_vport_context(mdev, in, inlen); + + kvfree(in); + return err; +} +EXPORT_SYMBOL_GPL(mlx5_modify_nic_vport_mtu); + int mlx5_query_nic_vport_mac_list(struct mlx5_core_dev *dev, u32 vport, enum mlx5_list_type list_type, diff --git a/include/linux/mlx5/vport.h b/include/linux/mlx5/vport.h index bd93e63..301da4a 100644 --- a/include/linux/mlx5/vport.h +++ b/include/linux/mlx5/vport.h @@ -45,6 +45,8 @@ int mlx5_query_nic_vport_mac_address(struct mlx5_core_dev *mdev, u16 vport, u8 *addr); int mlx5_modify_nic_vport_mac_address(struct mlx5_core_dev *dev, u16 vport, u8 *addr); +int mlx5_query_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 *mtu); +int mlx5_modify_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 mtu); int mlx5_query_nic_vport_system_image_guid(struct mlx5_core_dev *mdev, u64 *system_image_guid); int mlx5_query_nic_vport_node_guid(struct mlx5_core_dev *mdev, u64 *node_guid); -- cgit v0.10.2 From 78228cbdeb0aa5c96e2a721e7e0d6953b416b5a3 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Fri, 22 Apr 2016 00:33:06 +0300 Subject: net/mlx5_core: Remove static from local variable The static is not required and breaks re-entrancy if it will be required. Fixes: 2530236303d9 ("net/mlx5_core: Flow steering tree initialization") Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 3c7e3e5..89cce97 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1276,7 +1276,7 @@ struct mlx5_flow_namespace *mlx5_get_flow_namespace(struct mlx5_core_dev *dev, { struct mlx5_flow_root_namespace *root_ns = dev->priv.root_ns; int prio; - static struct fs_prio *fs_prio; + struct fs_prio *fs_prio; struct mlx5_flow_namespace *ns; if (!root_ns) -- cgit v0.10.2 From 5fc7197d3a256d9c5de3134870304b24892a4908 Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Fri, 22 Apr 2016 00:33:07 +0300 Subject: net/mlx5: Add pci shutdown callback This patch introduces kexec support for mlx5. When switching kernels, kexec() calls shutdown, which unloads the driver and cleans its resources. In addition, remove unregister netdev from shutdown flow. This will allow a clean shutdown, even if some netdev clients did not release their reference from this netdev. Releasing The HW resources only is enough as the kernel is shutting down Signed-off-by: Majd Dibbiny Signed-off-by: Tariq Toukan Signed-off-by: Haggai Abramovsky Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 85773f8..67d548b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2633,7 +2633,16 @@ static void mlx5e_destroy_netdev(struct mlx5_core_dev *mdev, void *vpriv) schedule_work(&priv->set_rx_mode_work); mlx5e_disable_async_events(priv); flush_scheduled_work(); - unregister_netdev(netdev); + if (test_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &mdev->intf_state)) { + netif_device_detach(netdev); + mutex_lock(&priv->state_lock); + if (test_bit(MLX5E_STATE_OPENED, &priv->state)) + mlx5e_close_locked(netdev); + mutex_unlock(&priv->state_lock); + } else { + unregister_netdev(netdev); + } + mlx5e_tc_cleanup(priv); mlx5e_vxlan_cleanup(priv); mlx5e_destroy_flow_tables(priv); @@ -2646,7 +2655,9 @@ static void mlx5e_destroy_netdev(struct mlx5_core_dev *mdev, void *vpriv) mlx5_core_dealloc_transport_domain(priv->mdev, priv->tdn); mlx5_core_dealloc_pd(priv->mdev, priv->pdn); mlx5_unmap_free_uar(priv->mdev, &priv->cq_uar); - free_netdev(netdev); + + if (!test_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &mdev->intf_state)) + free_netdev(netdev); } static void *mlx5e_get_netdev(void *vpriv) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index ddd352a..6892746 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -966,7 +966,7 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv) int err; mutex_lock(&dev->intf_state_mutex); - if (dev->interface_state == MLX5_INTERFACE_STATE_UP) { + if (test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) { dev_warn(&dev->pdev->dev, "%s: interface is up, NOP\n", __func__); goto out; @@ -1133,7 +1133,8 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv) if (err) pr_info("failed request module on %s\n", MLX5_IB_MOD); - dev->interface_state = MLX5_INTERFACE_STATE_UP; + clear_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state); + set_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state); out: mutex_unlock(&dev->intf_state_mutex); @@ -1207,7 +1208,7 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv) } mutex_lock(&dev->intf_state_mutex); - if (dev->interface_state == MLX5_INTERFACE_STATE_DOWN) { + if (test_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state)) { dev_warn(&dev->pdev->dev, "%s: interface is down, NOP\n", __func__); goto out; @@ -1241,7 +1242,8 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv) mlx5_cmd_cleanup(dev); out: - dev->interface_state = MLX5_INTERFACE_STATE_DOWN; + clear_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state); + set_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state); mutex_unlock(&dev->intf_state_mutex); return err; } @@ -1452,6 +1454,18 @@ static const struct pci_error_handlers mlx5_err_handler = { .resume = mlx5_pci_resume }; +static void shutdown(struct pci_dev *pdev) +{ + struct mlx5_core_dev *dev = pci_get_drvdata(pdev); + struct mlx5_priv *priv = &dev->priv; + + dev_info(&pdev->dev, "Shutdown was called\n"); + /* Notify mlx5 clients that the kernel is being shut down */ + set_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &dev->intf_state); + mlx5_unload_one(dev, priv); + mlx5_pci_disable_device(dev); +} + static const struct pci_device_id mlx5_core_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x1011) }, /* Connect-IB */ { PCI_VDEVICE(MELLANOX, 0x1012), MLX5_PCI_DEV_IS_VF}, /* Connect-IB VF */ @@ -1471,6 +1485,7 @@ static struct pci_driver mlx5_core_driver = { .id_table = mlx5_core_pci_table, .probe = init_one, .remove = remove_one, + .shutdown = shutdown, .err_handler = &mlx5_err_handler, .sriov_configure = mlx5_core_sriov_configure, }; diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index dcd5ac8..369c837 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -519,8 +519,9 @@ enum mlx5_device_state { }; enum mlx5_interface_state { - MLX5_INTERFACE_STATE_DOWN, - MLX5_INTERFACE_STATE_UP, + MLX5_INTERFACE_STATE_DOWN = BIT(0), + MLX5_INTERFACE_STATE_UP = BIT(1), + MLX5_INTERFACE_STATE_SHUTDOWN = BIT(2), }; enum mlx5_pci_status { @@ -544,7 +545,7 @@ struct mlx5_core_dev { enum mlx5_device_state state; /* sync interface state */ struct mutex intf_state_mutex; - enum mlx5_interface_state interface_state; + unsigned long intf_state; void (*event) (struct mlx5_core_dev *dev, enum mlx5_dev_event event, unsigned long param); -- cgit v0.10.2 From 02da2d72174c61988eb4456b53f405e3ebdebce4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 24 Apr 2016 16:17:05 -0700 Subject: Linux 4.6-rc5 diff --git a/Makefile b/Makefile index 012b7dd..9496df8 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Blurry Fish Butt # *DOCUMENTATION* -- cgit v0.10.2 From 94862a62dfe3ba1c7601115a2dc80721c5b256f0 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 21 Apr 2016 20:57:47 +0200 Subject: Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC" Revert commit 0df35026c6a5 (cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC) that introduced a regression by causing the ondemand cpufreq governor to misbehave for CONFIG_TICK_CPU_ACCOUNTING unset (the frequency goes up to the max at one point and stays there indefinitely). The revert takes subsequent modifications of the code in question into account. Fixes: 0df35026c6a5 (cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=115261 Reported-and-tested-by: Timo Valtoaho Cc: 4.5+ # 4.5+ Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 10a5cfe..5f1147f 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -193,12 +193,8 @@ unsigned int dbs_update(struct cpufreq_policy *policy) wall_time = cur_wall_time - j_cdbs->prev_cpu_wall; j_cdbs->prev_cpu_wall = cur_wall_time; - if (cur_idle_time <= j_cdbs->prev_cpu_idle) { - idle_time = 0; - } else { - idle_time = cur_idle_time - j_cdbs->prev_cpu_idle; - j_cdbs->prev_cpu_idle = cur_idle_time; - } + idle_time = cur_idle_time - j_cdbs->prev_cpu_idle; + j_cdbs->prev_cpu_idle = cur_idle_time; if (ignore_nice) { u64 cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; -- cgit v0.10.2 From 391a20333b8393ef2e13014e6e59d192c5594471 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Thu, 21 Apr 2016 22:23:31 +0200 Subject: ipv4/fib: don't warn when primary address is missing if in_dev is dead After commit fbd40ea0180a ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 8a9246d..63566ec 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -904,7 +904,11 @@ void fib_del_ifaddr(struct in_ifaddr *ifa, struct in_ifaddr *iprim) if (ifa->ifa_flags & IFA_F_SECONDARY) { prim = inet_ifa_byprefix(in_dev, any, ifa->ifa_mask); if (!prim) { - pr_warn("%s: bug: prim == NULL\n", __func__); + /* if the device has been deleted, we don't perform + * address promotion + */ + if (!in_dev->dead) + pr_warn("%s: bug: prim == NULL\n", __func__); return; } if (iprim && iprim != prim) { -- cgit v0.10.2 From da67e68c0e4601e87612918496fd8c7d72795e50 Mon Sep 17 00:00:00 2001 From: Eric Engestrom Date: Mon, 25 Apr 2016 01:24:04 +0100 Subject: Documentation: dt: arc: fix spelling mistakes Signed-off-by: Eric Engestrom Signed-off-by: Vineet Gupta diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt index 1ae98b87..e4b9dce 100644 --- a/Documentation/devicetree/bindings/arc/archs-pct.txt +++ b/Documentation/devicetree/bindings/arc/archs-pct.txt @@ -2,7 +2,7 @@ The ARC HS can be configured with a pipeline performance monitor for counting CPU and cache events like cache misses and hits. Like conventional PCT there -are 100+ hardware conditions dynamically mapped to upto 32 counters. +are 100+ hardware conditions dynamically mapped to up to 32 counters. It also supports overflow interrupts. Required properties: diff --git a/Documentation/devicetree/bindings/arc/pct.txt b/Documentation/devicetree/bindings/arc/pct.txt index 7b95884..4e874d9 100644 --- a/Documentation/devicetree/bindings/arc/pct.txt +++ b/Documentation/devicetree/bindings/arc/pct.txt @@ -2,7 +2,7 @@ The ARC700 can be configured with a pipeline performance monitor for counting CPU and cache events like cache misses and hits. Like conventional PCT there -are 100+ hardware conditions dynamically mapped to upto 32 counters +are 100+ hardware conditions dynamically mapped to up to 32 counters Note that: * The ARC 700 PCT does not support interrupts; although HW events may be -- cgit v0.10.2 From 3020ca711871fdaf0c15c8bab677a6bc302e28fe Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 22 Apr 2016 04:00:50 -0300 Subject: [media] v4l2-dv-timings.h: fix polarity for 4k formats The VSync polarity was negative instead of positive for the 4k CEA formats. I probably copy-and-pasted these from the DMT 4k format, which does have a negative VSync polarity. Signed-off-by: Hans Verkuil Reported-by: Martin Bugge Cc: # for v4.1 and up Signed-off-by: Mauro Carvalho Chehab diff --git a/include/uapi/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h index c039f1d..086168e 100644 --- a/include/uapi/linux/v4l2-dv-timings.h +++ b/include/uapi/linux/v4l2-dv-timings.h @@ -183,7 +183,8 @@ #define V4L2_DV_BT_CEA_3840X2160P24 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 1276, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ @@ -191,14 +192,16 @@ #define V4L2_DV_BT_CEA_3840X2160P25 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 1056, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ } #define V4L2_DV_BT_CEA_3840X2160P30 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 176, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ @@ -206,14 +209,16 @@ #define V4L2_DV_BT_CEA_3840X2160P50 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 594000000, 1056, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ } #define V4L2_DV_BT_CEA_3840X2160P60 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 594000000, 176, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ @@ -221,7 +226,8 @@ #define V4L2_DV_BT_CEA_4096X2160P24 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 1020, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ @@ -229,14 +235,16 @@ #define V4L2_DV_BT_CEA_4096X2160P25 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 968, 88, 128, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ } #define V4L2_DV_BT_CEA_4096X2160P30 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 88, 88, 128, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ @@ -244,14 +252,16 @@ #define V4L2_DV_BT_CEA_4096X2160P50 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 594000000, 968, 88, 128, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ } #define V4L2_DV_BT_CEA_4096X2160P60 { \ .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \ + V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \ + V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 594000000, 88, 88, 128, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ -- cgit v0.10.2 From b93876845c5e30a92964eeb088d9d2e024118022 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Mon, 25 Apr 2016 06:04:45 -0300 Subject: [media] media: vb2: Fix regression on poll() for RW mode When using a device is read/write mode, vb2 does not handle properly the first select/poll operation. The reason for this, is that when this code has been refactored, some of the operations have changed their order, and now fileio emulator is not started. The reintroduced check to the core is enabled by a quirk flag, that avoids this check by other subsystems like DVB. Fixes: 49d8ab9feaf2 ("media] media: videobuf2: Separate vb2_poll()") Reported-by: Dimitrios Katsaros Cc: Junghak Sung Cc: # for v4.5 and up Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 2169544..9fbcb67 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -2298,6 +2298,16 @@ unsigned int vb2_core_poll(struct vb2_queue *q, struct file *file, return POLLERR; /* + * If this quirk is set and QBUF hasn't been called yet then + * return POLLERR as well. This only affects capture queues, output + * queues will always initialize waiting_for_buffers to false. + * This quirk is set by V4L2 for backwards compatibility reasons. + */ + if (q->quirk_poll_must_check_waiting_for_buffers && + q->waiting_for_buffers && (req_events & (POLLIN | POLLRDNORM))) + return POLLERR; + + /* * For output streams you can call write() as long as there are fewer * buffers queued than there are buffers available. */ diff --git a/drivers/media/v4l2-core/videobuf2-v4l2.c b/drivers/media/v4l2-core/videobuf2-v4l2.c index 8da7470..7f366f1 100644 --- a/drivers/media/v4l2-core/videobuf2-v4l2.c +++ b/drivers/media/v4l2-core/videobuf2-v4l2.c @@ -771,6 +771,12 @@ int vb2_queue_init(struct vb2_queue *q) q->is_output = V4L2_TYPE_IS_OUTPUT(q->type); q->copy_timestamp = (q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK) == V4L2_BUF_FLAG_TIMESTAMP_COPY; + /* + * For compatibility with vb1: if QBUF hasn't been called yet, then + * return POLLERR as well. This only affects capture queues, output + * queues will always initialize waiting_for_buffers to false. + */ + q->quirk_poll_must_check_waiting_for_buffers = true; return vb2_core_queue_init(q); } @@ -824,14 +830,6 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) poll_wait(file, &fh->wait, wait); } - /* - * For compatibility with vb1: if QBUF hasn't been called yet, then - * return POLLERR as well. This only affects capture queues, output - * queues will always initialize waiting_for_buffers to false. - */ - if (q->waiting_for_buffers && (req_events & (POLLIN | POLLRDNORM))) - return POLLERR; - return res | vb2_core_poll(q, file, wait); } EXPORT_SYMBOL_GPL(vb2_poll); diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index 5342ff4..88e3ab4 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -404,6 +404,9 @@ struct vb2_buf_ops { * @fileio_read_once: report EOF after reading the first buffer * @fileio_write_immediately: queue buffer after each write() call * @allow_zero_bytesused: allow bytesused == 0 to be passed to the driver + * @quirk_poll_must_check_waiting_for_buffers: Return POLLERR at poll when QBUF + * has not been called. This is a vb1 idiom that has been adopted + * also by vb2. * @lock: pointer to a mutex that protects the vb2_queue struct. The * driver can set this to a mutex to let the v4l2 core serialize * the queuing ioctls. If the driver wants to handle locking @@ -467,6 +470,7 @@ struct vb2_queue { unsigned fileio_read_once:1; unsigned fileio_write_immediately:1; unsigned allow_zero_bytesused:1; + unsigned quirk_poll_must_check_waiting_for_buffers:1; struct mutex *lock; void *owner; -- cgit v0.10.2 From 89a095668304e8a02502ffd35edacffdbf49aa8c Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Thu, 3 Mar 2016 16:12:48 -0300 Subject: [media] vb2-memops: Fix over allocation of frame vectors On page unaligned frames, create_framevec forces get_vaddr_frames to allocate an extra page at the end of the buffer. Under some circumstances, this leads to -EINVAL on VIDIOC_QBUF. E.g: We have vm_a that vm_area that goes from 0x1000 to 0x3000. And a frame that goes from 0x1800 to 0x2800, i.e. 2 pages. frame_vector_create will be called with the following params: get_vaddr_frames(0x1800, 2, write, 1, vec); get_vaddr will allocate the first page after checking that the memory 0x1800-0x27ff is valid, but it will not allocate the second page because the range 0x2800-0x37ff is out of the vm_a range. This results in create_framevec returning -EFAULT Error Trace: [ 9083.793015] video0: VIDIOC_QBUF: 00:00:00.00000000 index=1, type=vid-cap, flags=0x00002002, field=any, sequence=0, memory=userptr, bytesused=0, offset/userptr=0x7ff2b023ca80, length=5765760 [ 9083.793028] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000 [ 9083.793117] video0: VIDIOC_QBUF: error -22: 00:00:00.00000000 index=2, type=vid-cap, flags=0x00000000, field=any, sequence=0, memory=userptr, bytesused=0, offset/userptr=0x7ff2b07bc500, length=5765760 Also use true instead of 1 since that argument is a bool in the get_vaddr_frames() prototype. Fixes: 21fb0cb7ec65 ("[media] vb2: Provide helpers for mapping virtual addresses") Reported-by: Albert Antony Signed-off-by: Ricardo Ribalda Delgado [hans.verkuil@cisco.com: merged the 'bool' change into this patch] Acked-by: Marek Szyprowski Reviewed-by: Jan Kara Cc: # for v4.3 and up Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/v4l2-core/videobuf2-memops.c b/drivers/media/v4l2-core/videobuf2-memops.c index dbec592..3c3b517 100644 --- a/drivers/media/v4l2-core/videobuf2-memops.c +++ b/drivers/media/v4l2-core/videobuf2-memops.c @@ -49,7 +49,7 @@ struct frame_vector *vb2_create_framevec(unsigned long start, vec = frame_vector_create(nr); if (!vec) return ERR_PTR(-ENOMEM); - ret = get_vaddr_frames(start, nr, write, 1, vec); + ret = get_vaddr_frames(start & PAGE_MASK, nr, write, true, vec); if (ret < 0) goto out_destroy; /* We accept only complete set of PFNs */ -- cgit v0.10.2 From a30b8f81d9d6fe24eab8a023794548b048f08e3c Mon Sep 17 00:00:00 2001 From: Azael Avalos Date: Fri, 22 Apr 2016 09:29:36 -0600 Subject: toshiba_acpi: Fix regression caused by hotkey enabling value Commit 52cbae0127ad ("toshiba_acpi: Change default Hotkey enabling value") changed the hotkeys enabling value, as it was the same value Windows uses, however, it turns out that the value tells the EC that the driver will now take care of the hardware events like the physical RFKill switch or the pointing device toggle button. This patch reverts such commit by changing the default hotkey enabling value to 0x09, which enables hotkey events only, making the hardware buttons working again. Fixes bugs 113331 and 114941. Signed-off-by: Azael Avalos Cc: stable@vger.kernel.org Signed-off-by: Darren Hart diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index df1f1a7..01e12d2 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -135,7 +135,7 @@ MODULE_LICENSE("GPL"); /* Field definitions */ #define HCI_ACCEL_MASK 0x7fff #define HCI_HOTKEY_DISABLE 0x0b -#define HCI_HOTKEY_ENABLE 0x01 +#define HCI_HOTKEY_ENABLE 0x09 #define HCI_HOTKEY_SPECIAL_FUNCTIONS 0x10 #define HCI_LCD_BRIGHTNESS_BITS 3 #define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS) -- cgit v0.10.2 From 6c1ea260f89709e0021d2c59f8fd2a104b5b1123 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 11 Apr 2016 19:34:49 +0200 Subject: libceph: make authorizer destruction independent of ceph_auth_client Starting the kernel client with cephx disabled and then enabling cephx and restarting userspace daemons can result in a crash: [262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000 [262671.531460] IP: [] kfree+0x5a/0x130 [262671.584334] PGD 0 [262671.635847] Oops: 0000 [#1] SMP [262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu [262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014 [262672.268937] Workqueue: ceph-msgr con_work [libceph] [262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000 [262672.428330] RIP: 0010:[] [] kfree+0x5a/0x130 [262672.535880] RSP: 0018:ffff880149aeba58 EFLAGS: 00010286 [262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018 [262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012 [262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000 [262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40 [262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840 [262673.131722] FS: 0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000 [262673.245377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0 [262673.417556] Stack: [262673.472943] ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04 [262673.583767] ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00 [262673.694546] ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800 [262673.805230] Call Trace: [262673.859116] [] ceph_x_destroy_authorizer+0x1f/0x50 [libceph] [262673.968705] [] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph] [262674.078852] [] put_osd+0x45/0x80 [libceph] [262674.134249] [] remove_osd+0xae/0x140 [libceph] [262674.189124] [] __reset_osd+0x103/0x150 [libceph] [262674.243749] [] kick_requests+0x223/0x460 [libceph] [262674.297485] [] ceph_osdc_handle_map+0x282/0x5e0 [libceph] [262674.350813] [] dispatch+0x4e/0x720 [libceph] [262674.403312] [] try_read+0x3d1/0x1090 [libceph] [262674.454712] [] ? dequeue_entity+0x152/0x690 [262674.505096] [] con_work+0xcb/0x1300 [libceph] [262674.555104] [] process_one_work+0x14e/0x3d0 [262674.604072] [] worker_thread+0x11a/0x470 [262674.652187] [] ? rescuer_thread+0x310/0x310 [262674.699022] [] kthread+0xd2/0xf0 [262674.744494] [] ? kthread_create_on_node+0x1c0/0x1c0 [262674.789543] [] ret_from_fork+0x3f/0x70 [262674.834094] [] ? kthread_create_on_node+0x1c0/0x1c0 What happens is the following: (1) new MON session is established (2) old "none" ac is destroyed (3) new "cephx" ac is constructed ... (4) old OSD session (w/ "none" authorizer) is put ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer) osd->o_auth.authorizer in the "none" case is just a bare pointer into ac, which contains a single static copy for all services. By the time we get to (4), "none" ac, freed in (2), is long gone. On top of that, a new vtable installed in (3) points us at ceph_x_destroy_authorizer(), so we end up trying to destroy a "none" authorizer with a "cephx" destructor operating on invalid memory! To fix this, decouple authorizer destruction from ac and do away with a single static "none" authorizer by making a copy for each OSD or MDS session. Authorizers themselves are independent of ac and so there is no reason for destroy_authorizer() to be an ac op. Make it an op on the authorizer itself by turning ceph_authorizer into a real struct. Fixes: http://tracker.ceph.com/issues/15447 Reported-by: Alan Zhang Signed-off-by: Ilya Dryomov Reviewed-by: Sage Weil diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 541ead4..85b8517 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -386,9 +386,7 @@ void ceph_put_mds_session(struct ceph_mds_session *s) atomic_read(&s->s_ref), atomic_read(&s->s_ref)-1); if (atomic_dec_and_test(&s->s_ref)) { if (s->s_auth.authorizer) - ceph_auth_destroy_authorizer( - s->s_mdsc->fsc->client->monc.auth, - s->s_auth.authorizer); + ceph_auth_destroy_authorizer(s->s_auth.authorizer); kfree(s); } } @@ -3900,7 +3898,7 @@ static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con, struct ceph_auth_handshake *auth = &s->s_auth; if (force_new && auth->authorizer) { - ceph_auth_destroy_authorizer(ac, auth->authorizer); + ceph_auth_destroy_authorizer(auth->authorizer); auth->authorizer = NULL; } if (!auth->authorizer) { diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h index 260d78b..1563265 100644 --- a/include/linux/ceph/auth.h +++ b/include/linux/ceph/auth.h @@ -12,9 +12,12 @@ */ struct ceph_auth_client; -struct ceph_authorizer; struct ceph_msg; +struct ceph_authorizer { + void (*destroy)(struct ceph_authorizer *); +}; + struct ceph_auth_handshake { struct ceph_authorizer *authorizer; void *authorizer_buf; @@ -62,8 +65,6 @@ struct ceph_auth_client_ops { struct ceph_auth_handshake *auth); int (*verify_authorizer_reply)(struct ceph_auth_client *ac, struct ceph_authorizer *a, size_t len); - void (*destroy_authorizer)(struct ceph_auth_client *ac, - struct ceph_authorizer *a); void (*invalidate_authorizer)(struct ceph_auth_client *ac, int peer_type); @@ -112,8 +113,7 @@ extern int ceph_auth_is_authenticated(struct ceph_auth_client *ac); extern int ceph_auth_create_authorizer(struct ceph_auth_client *ac, int peer_type, struct ceph_auth_handshake *auth); -extern void ceph_auth_destroy_authorizer(struct ceph_auth_client *ac, - struct ceph_authorizer *a); +void ceph_auth_destroy_authorizer(struct ceph_authorizer *a); extern int ceph_auth_update_authorizer(struct ceph_auth_client *ac, int peer_type, struct ceph_auth_handshake *a); diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index 4343df8..cbf4609 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -16,7 +16,6 @@ struct ceph_msg; struct ceph_snap_context; struct ceph_osd_request; struct ceph_osd_client; -struct ceph_authorizer; /* * completion callback for async writepages diff --git a/net/ceph/auth.c b/net/ceph/auth.c index 6b923bc..2bc5965 100644 --- a/net/ceph/auth.c +++ b/net/ceph/auth.c @@ -293,13 +293,9 @@ int ceph_auth_create_authorizer(struct ceph_auth_client *ac, } EXPORT_SYMBOL(ceph_auth_create_authorizer); -void ceph_auth_destroy_authorizer(struct ceph_auth_client *ac, - struct ceph_authorizer *a) +void ceph_auth_destroy_authorizer(struct ceph_authorizer *a) { - mutex_lock(&ac->mutex); - if (ac->ops && ac->ops->destroy_authorizer) - ac->ops->destroy_authorizer(ac, a); - mutex_unlock(&ac->mutex); + a->destroy(a); } EXPORT_SYMBOL(ceph_auth_destroy_authorizer); diff --git a/net/ceph/auth_none.c b/net/ceph/auth_none.c index 8c93fa8..5f836f0 100644 --- a/net/ceph/auth_none.c +++ b/net/ceph/auth_none.c @@ -16,7 +16,6 @@ static void reset(struct ceph_auth_client *ac) struct ceph_auth_none_info *xi = ac->private; xi->starting = true; - xi->built_authorizer = false; } static void destroy(struct ceph_auth_client *ac) @@ -39,6 +38,27 @@ static int should_authenticate(struct ceph_auth_client *ac) return xi->starting; } +static int ceph_auth_none_build_authorizer(struct ceph_auth_client *ac, + struct ceph_none_authorizer *au) +{ + void *p = au->buf; + void *const end = p + sizeof(au->buf); + int ret; + + ceph_encode_8_safe(&p, end, 1, e_range); + ret = ceph_entity_name_encode(ac->name, &p, end); + if (ret < 0) + return ret; + + ceph_encode_64_safe(&p, end, ac->global_id, e_range); + au->buf_len = p - (void *)au->buf; + dout("%s built authorizer len %d\n", __func__, au->buf_len); + return 0; + +e_range: + return -ERANGE; +} + static int build_request(struct ceph_auth_client *ac, void *buf, void *end) { return 0; @@ -57,32 +77,32 @@ static int handle_reply(struct ceph_auth_client *ac, int result, return result; } +static void ceph_auth_none_destroy_authorizer(struct ceph_authorizer *a) +{ + kfree(a); +} + /* - * build an 'authorizer' with our entity_name and global_id. we can - * reuse a single static copy since it is identical for all services - * we connect to. + * build an 'authorizer' with our entity_name and global_id. it is + * identical for all services we connect to. */ static int ceph_auth_none_create_authorizer( struct ceph_auth_client *ac, int peer_type, struct ceph_auth_handshake *auth) { - struct ceph_auth_none_info *ai = ac->private; - struct ceph_none_authorizer *au = &ai->au; - void *p, *end; + struct ceph_none_authorizer *au; int ret; - if (!ai->built_authorizer) { - p = au->buf; - end = p + sizeof(au->buf); - ceph_encode_8(&p, 1); - ret = ceph_entity_name_encode(ac->name, &p, end - 8); - if (ret < 0) - goto bad; - ceph_decode_need(&p, end, sizeof(u64), bad2); - ceph_encode_64(&p, ac->global_id); - au->buf_len = p - (void *)au->buf; - ai->built_authorizer = true; - dout("built authorizer len %d\n", au->buf_len); + au = kmalloc(sizeof(*au), GFP_NOFS); + if (!au) + return -ENOMEM; + + au->base.destroy = ceph_auth_none_destroy_authorizer; + + ret = ceph_auth_none_build_authorizer(ac, au); + if (ret) { + kfree(au); + return ret; } auth->authorizer = (struct ceph_authorizer *) au; @@ -92,17 +112,6 @@ static int ceph_auth_none_create_authorizer( auth->authorizer_reply_buf_len = sizeof (au->reply_buf); return 0; - -bad2: - ret = -ERANGE; -bad: - return ret; -} - -static void ceph_auth_none_destroy_authorizer(struct ceph_auth_client *ac, - struct ceph_authorizer *a) -{ - /* nothing to do */ } static const struct ceph_auth_client_ops ceph_auth_none_ops = { @@ -114,7 +123,6 @@ static const struct ceph_auth_client_ops ceph_auth_none_ops = { .build_request = build_request, .handle_reply = handle_reply, .create_authorizer = ceph_auth_none_create_authorizer, - .destroy_authorizer = ceph_auth_none_destroy_authorizer, }; int ceph_auth_none_init(struct ceph_auth_client *ac) @@ -127,7 +135,6 @@ int ceph_auth_none_init(struct ceph_auth_client *ac) return -ENOMEM; xi->starting = true; - xi->built_authorizer = false; ac->protocol = CEPH_AUTH_NONE; ac->private = xi; diff --git a/net/ceph/auth_none.h b/net/ceph/auth_none.h index 059a3ce..6202153 100644 --- a/net/ceph/auth_none.h +++ b/net/ceph/auth_none.h @@ -12,6 +12,7 @@ */ struct ceph_none_authorizer { + struct ceph_authorizer base; char buf[128]; int buf_len; char reply_buf[0]; @@ -19,8 +20,6 @@ struct ceph_none_authorizer { struct ceph_auth_none_info { bool starting; - bool built_authorizer; - struct ceph_none_authorizer au; /* we only need one; it's static */ }; int ceph_auth_none_init(struct ceph_auth_client *ac); diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c index 9e43a31..a0905f0 100644 --- a/net/ceph/auth_x.c +++ b/net/ceph/auth_x.c @@ -565,6 +565,14 @@ static int ceph_x_handle_reply(struct ceph_auth_client *ac, int result, return -EAGAIN; } +static void ceph_x_destroy_authorizer(struct ceph_authorizer *a) +{ + struct ceph_x_authorizer *au = (void *)a; + + ceph_x_authorizer_cleanup(au); + kfree(au); +} + static int ceph_x_create_authorizer( struct ceph_auth_client *ac, int peer_type, struct ceph_auth_handshake *auth) @@ -581,6 +589,8 @@ static int ceph_x_create_authorizer( if (!au) return -ENOMEM; + au->base.destroy = ceph_x_destroy_authorizer; + ret = ceph_x_build_authorizer(ac, th, au); if (ret) { kfree(au); @@ -643,16 +653,6 @@ static int ceph_x_verify_authorizer_reply(struct ceph_auth_client *ac, return ret; } -static void ceph_x_destroy_authorizer(struct ceph_auth_client *ac, - struct ceph_authorizer *a) -{ - struct ceph_x_authorizer *au = (void *)a; - - ceph_x_authorizer_cleanup(au); - kfree(au); -} - - static void ceph_x_reset(struct ceph_auth_client *ac) { struct ceph_x_info *xi = ac->private; @@ -770,7 +770,6 @@ static const struct ceph_auth_client_ops ceph_x_ops = { .create_authorizer = ceph_x_create_authorizer, .update_authorizer = ceph_x_update_authorizer, .verify_authorizer_reply = ceph_x_verify_authorizer_reply, - .destroy_authorizer = ceph_x_destroy_authorizer, .invalidate_authorizer = ceph_x_invalidate_authorizer, .reset = ceph_x_reset, .destroy = ceph_x_destroy, diff --git a/net/ceph/auth_x.h b/net/ceph/auth_x.h index 40b1a3c..21a5af9 100644 --- a/net/ceph/auth_x.h +++ b/net/ceph/auth_x.h @@ -26,6 +26,7 @@ struct ceph_x_ticket_handler { struct ceph_x_authorizer { + struct ceph_authorizer base; struct ceph_crypto_key session_key; struct ceph_buffer *buf; unsigned int service; diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 32355d9d..40a53a7 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -1087,10 +1087,8 @@ static void put_osd(struct ceph_osd *osd) dout("put_osd %p %d -> %d\n", osd, atomic_read(&osd->o_ref), atomic_read(&osd->o_ref) - 1); if (atomic_dec_and_test(&osd->o_ref)) { - struct ceph_auth_client *ac = osd->o_osdc->client->monc.auth; - if (osd->o_auth.authorizer) - ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer); + ceph_auth_destroy_authorizer(osd->o_auth.authorizer); kfree(osd); } } @@ -2984,7 +2982,7 @@ static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con, struct ceph_auth_handshake *auth = &o->o_auth; if (force_new && auth->authorizer) { - ceph_auth_destroy_authorizer(ac, auth->authorizer); + ceph_auth_destroy_authorizer(auth->authorizer); auth->authorizer = NULL; } if (!auth->authorizer) { -- cgit v0.10.2 From 841645b5f2dfceac69b78fcd0c9050868d41ea61 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 25 Apr 2016 15:33:55 -0400 Subject: ipv6: Revert optional address flusing on ifdown. This reverts the following three commits: 70af921db6f8835f4b11c65731116560adb00c14 799977d9aafbf0ca0b9c39b04cbfb16db71302c9 f1705ec197e705b79ea40fe7a2cc5acfa1d3bfac The feature was ill conceived, has terrible semantics, and has added nothing but regressions to the already fragile ipv6 stack. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index b183e2b..e0ac252 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1568,15 +1568,6 @@ temp_prefered_lft - INTEGER Preferred lifetime (in seconds) for temporary addresses. Default: 86400 (1 day) -keep_addr_on_down - INTEGER - Keep all IPv6 addresses on an interface down event. If set static - global addresses with no expiration time are not flushed. - >0 : enabled - 0 : system default - <0 : disabled - - Default: 0 (addresses are removed) - max_desync_factor - INTEGER Maximum value for DESYNC_FACTOR, which is a random value that ensures that clients don't synchronize with each diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 7edc14f..4b2267e 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -62,7 +62,6 @@ struct ipv6_devconf { struct in6_addr secret; } stable_secret; __s32 use_oif_addrs_only; - __s32 keep_addr_on_down; void *sysctl; }; diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 3958760..ec117b6 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -176,7 +176,6 @@ enum { DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN, DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, DEVCONF_DROP_UNSOLICITED_NA, - DEVCONF_KEEP_ADDR_ON_DOWN, DEVCONF_MAX }; diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 23cec53..d77ba39 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -216,7 +216,6 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = { }, .use_oif_addrs_only = 0, .ignore_routes_with_linkdown = 0, - .keep_addr_on_down = 0, }; static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = { @@ -261,7 +260,6 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = { }, .use_oif_addrs_only = 0, .ignore_routes_with_linkdown = 0, - .keep_addr_on_down = 0, }; /* Check if a valid qdisc is available */ @@ -3176,81 +3174,6 @@ static void addrconf_gre_config(struct net_device *dev) } #endif -#if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV) -/* If the host route is cached on the addr struct make sure it is associated - * with the proper table. e.g., enslavement can change and if so the cached - * host route needs to move to the new table. - */ -static void l3mdev_check_host_rt(struct inet6_dev *idev, - struct inet6_ifaddr *ifp) -{ - if (ifp->rt) { - u32 tb_id = l3mdev_fib_table(idev->dev) ? : RT6_TABLE_LOCAL; - - if (tb_id != ifp->rt->rt6i_table->tb6_id) { - ip6_del_rt(ifp->rt); - ifp->rt = NULL; - } - } -} -#else -static void l3mdev_check_host_rt(struct inet6_dev *idev, - struct inet6_ifaddr *ifp) -{ -} -#endif - -static int fixup_permanent_addr(struct inet6_dev *idev, - struct inet6_ifaddr *ifp) -{ - l3mdev_check_host_rt(idev, ifp); - - if (!ifp->rt) { - struct rt6_info *rt; - - rt = addrconf_dst_alloc(idev, &ifp->addr, false); - if (unlikely(IS_ERR(rt))) - return PTR_ERR(rt); - - ifp->rt = rt; - } - - if (!(ifp->flags & IFA_F_NOPREFIXROUTE)) { - addrconf_prefix_route(&ifp->addr, ifp->prefix_len, - idev->dev, 0, 0); - } - - addrconf_dad_start(ifp); - - return 0; -} - -static void addrconf_permanent_addr(struct net_device *dev) -{ - struct inet6_ifaddr *ifp, *tmp; - struct inet6_dev *idev; - - idev = __in6_dev_get(dev); - if (!idev) - return; - - write_lock_bh(&idev->lock); - - list_for_each_entry_safe(ifp, tmp, &idev->addr_list, if_list) { - if ((ifp->flags & IFA_F_PERMANENT) && - fixup_permanent_addr(idev, ifp) < 0) { - write_unlock_bh(&idev->lock); - ipv6_del_addr(ifp); - write_lock_bh(&idev->lock); - - net_info_ratelimited("%s: Failed to add prefix route for address %pI6c; dropping\n", - idev->dev->name, &ifp->addr); - } - } - - write_unlock_bh(&idev->lock); -} - static int addrconf_notify(struct notifier_block *this, unsigned long event, void *ptr) { @@ -3337,9 +3260,6 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, run_pending = 1; } - /* restore routes for permanent addresses */ - addrconf_permanent_addr(dev); - switch (dev->type) { #if IS_ENABLED(CONFIG_IPV6_SIT) case ARPHRD_SIT: @@ -3448,20 +3368,11 @@ static void addrconf_type_change(struct net_device *dev, unsigned long event) ipv6_mc_unmap(idev); } -static bool addr_is_local(const struct in6_addr *addr) -{ - return ipv6_addr_type(addr) & - (IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK); -} - static int addrconf_ifdown(struct net_device *dev, int how) { struct net *net = dev_net(dev); struct inet6_dev *idev; - struct inet6_ifaddr *ifa, *tmp; - struct list_head del_list; - int _keep_addr; - bool keep_addr; + struct inet6_ifaddr *ifa; int state, i; ASSERT_RTNL(); @@ -3488,16 +3399,6 @@ static int addrconf_ifdown(struct net_device *dev, int how) } - /* aggregate the system setting and interface setting */ - _keep_addr = net->ipv6.devconf_all->keep_addr_on_down; - if (!_keep_addr) - _keep_addr = idev->cnf.keep_addr_on_down; - - /* combine the user config with event to determine if permanent - * addresses are to be removed from address hash table - */ - keep_addr = !(how || _keep_addr <= 0); - /* Step 2: clear hash table */ for (i = 0; i < IN6_ADDR_HSIZE; i++) { struct hlist_head *h = &inet6_addr_lst[i]; @@ -3506,16 +3407,9 @@ static int addrconf_ifdown(struct net_device *dev, int how) restart: hlist_for_each_entry_rcu(ifa, h, addr_lst) { if (ifa->idev == idev) { + hlist_del_init_rcu(&ifa->addr_lst); addrconf_del_dad_work(ifa); - /* combined flag + permanent flag decide if - * address is retained on a down event - */ - if (!keep_addr || - !(ifa->flags & IFA_F_PERMANENT) || - addr_is_local(&ifa->addr)) { - hlist_del_init_rcu(&ifa->addr_lst); - goto restart; - } + goto restart; } } spin_unlock_bh(&addrconf_hash_lock); @@ -3549,54 +3443,31 @@ restart: write_lock_bh(&idev->lock); } - /* re-combine the user config with event to determine if permanent - * addresses are to be removed from the interface list - */ - keep_addr = (!how && _keep_addr > 0); - - INIT_LIST_HEAD(&del_list); - list_for_each_entry_safe(ifa, tmp, &idev->addr_list, if_list) { + while (!list_empty(&idev->addr_list)) { + ifa = list_first_entry(&idev->addr_list, + struct inet6_ifaddr, if_list); addrconf_del_dad_work(ifa); - write_unlock_bh(&idev->lock); - spin_lock_bh(&ifa->lock); - - if (keep_addr && (ifa->flags & IFA_F_PERMANENT) && - !addr_is_local(&ifa->addr)) { - /* set state to skip the notifier below */ - state = INET6_IFADDR_STATE_DEAD; - ifa->state = 0; - if (!(ifa->flags & IFA_F_NODAD)) - ifa->flags |= IFA_F_TENTATIVE; - } else { - state = ifa->state; - ifa->state = INET6_IFADDR_STATE_DEAD; + list_del(&ifa->if_list); - list_del(&ifa->if_list); - list_add(&ifa->if_list, &del_list); - } + write_unlock_bh(&idev->lock); + spin_lock_bh(&ifa->lock); + state = ifa->state; + ifa->state = INET6_IFADDR_STATE_DEAD; spin_unlock_bh(&ifa->lock); if (state != INET6_IFADDR_STATE_DEAD) { __ipv6_ifa_notify(RTM_DELADDR, ifa); inet6addr_notifier_call_chain(NETDEV_DOWN, ifa); } + in6_ifa_put(ifa); write_lock_bh(&idev->lock); } write_unlock_bh(&idev->lock); - /* now clean up addresses to be removed */ - while (!list_empty(&del_list)) { - ifa = list_first_entry(&del_list, - struct inet6_ifaddr, if_list); - list_del(&ifa->if_list); - - in6_ifa_put(ifa); - } - /* Step 5: Discard anycast and multicast list */ if (how) { ipv6_ac_destroy_dev(idev); @@ -4861,7 +4732,6 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf, array[DEVCONF_USE_OIF_ADDRS_ONLY] = cnf->use_oif_addrs_only; array[DEVCONF_DROP_UNICAST_IN_L2_MULTICAST] = cnf->drop_unicast_in_l2_multicast; array[DEVCONF_DROP_UNSOLICITED_NA] = cnf->drop_unsolicited_na; - array[DEVCONF_KEEP_ADDR_ON_DOWN] = cnf->keep_addr_on_down; } static inline size_t inet6_ifla6_size(void) @@ -5950,14 +5820,6 @@ static struct addrconf_sysctl_table .proc_handler = proc_dointvec, }, { - .procname = "keep_addr_on_down", - .data = &ipv6_devconf.keep_addr_on_down, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec, - - }, - { /* sentinel */ } }, -- cgit v0.10.2 From 5cf1cacb49aee39c3e02ae87068fc3c6430659b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 21 Apr 2016 19:06:48 -0400 Subject: cgroup, cpuset: replace cpuset_post_attach_flush() with cgroup_subsys->post_attach callback Since e93ad19d0564 ("cpuset: make mm migration asynchronous"), cpuset kicks off asynchronous NUMA node migration if necessary during task migration and flushes it from cpuset_post_attach_flush() which is called at the end of __cgroup_procs_write(). This is to avoid performing migration with cgroup_threadgroup_rwsem write-locked which can lead to deadlock through dependency on kworker creation. memcg has a similar issue with charge moving, so let's convert it to an official callback rather than the current one-off cpuset specific function. This patch adds cgroup_subsys->post_attach callback and makes cpuset register cpuset_post_attach_flush() as its ->post_attach. The conversion is mostly one-to-one except that the new callback is called under cgroup_mutex. This is to guarantee that no other migration operations are started before ->post_attach callbacks are finished. cgroup_mutex is one of the outermost mutex in the system and has never been and shouldn't be a problem. We can add specialized synchronization around __cgroup_procs_write() but I don't think there's any noticeable benefit. Signed-off-by: Tejun Heo Cc: Li Zefan Cc: Johannes Weiner Cc: Michal Hocko Cc: # 4.4+ prerequisite for the next patch diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h index 3e39ae5..5b17de6 100644 --- a/include/linux/cgroup-defs.h +++ b/include/linux/cgroup-defs.h @@ -444,6 +444,7 @@ struct cgroup_subsys { int (*can_attach)(struct cgroup_taskset *tset); void (*cancel_attach)(struct cgroup_taskset *tset); void (*attach)(struct cgroup_taskset *tset); + void (*post_attach)(void); int (*can_fork)(struct task_struct *task); void (*cancel_fork)(struct task_struct *task); void (*fork)(struct task_struct *task); diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index fea160e..85a868c 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -137,8 +137,6 @@ static inline void set_mems_allowed(nodemask_t nodemask) task_unlock(current); } -extern void cpuset_post_attach_flush(void); - #else /* !CONFIG_CPUSETS */ static inline bool cpusets_enabled(void) { return false; } @@ -245,10 +243,6 @@ static inline bool read_mems_allowed_retry(unsigned int seq) return false; } -static inline void cpuset_post_attach_flush(void) -{ -} - #endif /* !CONFIG_CPUSETS */ #endif /* _LINUX_CPUSET_H */ diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 671dc05..909a7d3 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2825,9 +2825,10 @@ static ssize_t __cgroup_procs_write(struct kernfs_open_file *of, char *buf, size_t nbytes, loff_t off, bool threadgroup) { struct task_struct *tsk; + struct cgroup_subsys *ss; struct cgroup *cgrp; pid_t pid; - int ret; + int ssid, ret; if (kstrtoint(strstrip(buf), 0, &pid) || pid < 0) return -EINVAL; @@ -2875,8 +2876,10 @@ out_unlock_rcu: rcu_read_unlock(); out_unlock_threadgroup: percpu_up_write(&cgroup_threadgroup_rwsem); + for_each_subsys(ss, ssid) + if (ss->post_attach) + ss->post_attach(); cgroup_kn_unlock(of->kn); - cpuset_post_attach_flush(); return ret ?: nbytes; } diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 00ab5c2..1902956 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -58,7 +58,6 @@ #include #include #include -#include #include #include @@ -1016,7 +1015,7 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from, } } -void cpuset_post_attach_flush(void) +static void cpuset_post_attach(void) { flush_workqueue(cpuset_migrate_mm_wq); } @@ -2087,6 +2086,7 @@ struct cgroup_subsys cpuset_cgrp_subsys = { .can_attach = cpuset_can_attach, .cancel_attach = cpuset_cancel_attach, .attach = cpuset_attach, + .post_attach = cpuset_post_attach, .bind = cpuset_bind, .legacy_cftypes = files, .early_init = true, -- cgit v0.10.2 From 264a0ae164bc0e9144bebcd25ff030d067b1a878 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 21 Apr 2016 19:09:02 -0400 Subject: memcg: relocate charge moving from ->attach to ->post_attach Hello, So, this ended up a lot simpler than I originally expected. I tested it lightly and it seems to work fine. Petr, can you please test these two patches w/o the lru drain drop patch and see whether the problem is gone? Thanks. ------ 8< ------ If charge moving is used, memcg performs relabeling of the affected pages from its ->attach callback which is called under both cgroup_threadgroup_rwsem and thus can't create new kthreads. This is fragile as various operations may depend on workqueues making forward progress which relies on the ability to create new kthreads. There's no reason to perform charge moving from ->attach which is deep in the task migration path. Move it to ->post_attach which is called after the actual migration is finished and cgroup_threadgroup_rwsem is dropped. * move_charge_struct->mm is added and ->can_attach is now responsible for pinning and recording the target mm. mem_cgroup_clear_mc() is updated accordingly. This also simplifies mem_cgroup_move_task(). * mem_cgroup_move_task() is now called from ->post_attach instead of ->attach. Signed-off-by: Tejun Heo Cc: Johannes Weiner Acked-by: Michal Hocko Debugged-and-tested-by: Petr Mladek Reported-by: Cyril Hrubis Reported-by: Johannes Weiner Fixes: 1ed1328792ff ("sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem") Cc: # 4.4+ diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 36db05f..fe787f5 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -207,6 +207,7 @@ static void mem_cgroup_oom_notify(struct mem_cgroup *memcg); /* "mc" and its members are protected by cgroup_mutex */ static struct move_charge_struct { spinlock_t lock; /* for from, to */ + struct mm_struct *mm; struct mem_cgroup *from; struct mem_cgroup *to; unsigned long flags; @@ -4667,6 +4668,8 @@ static void __mem_cgroup_clear_mc(void) static void mem_cgroup_clear_mc(void) { + struct mm_struct *mm = mc.mm; + /* * we must clear moving_task before waking up waiters at the end of * task migration. @@ -4676,7 +4679,10 @@ static void mem_cgroup_clear_mc(void) spin_lock(&mc.lock); mc.from = NULL; mc.to = NULL; + mc.mm = NULL; spin_unlock(&mc.lock); + + mmput(mm); } static int mem_cgroup_can_attach(struct cgroup_taskset *tset) @@ -4733,6 +4739,7 @@ static int mem_cgroup_can_attach(struct cgroup_taskset *tset) VM_BUG_ON(mc.moved_swap); spin_lock(&mc.lock); + mc.mm = mm; mc.from = from; mc.to = memcg; mc.flags = move_flags; @@ -4742,8 +4749,9 @@ static int mem_cgroup_can_attach(struct cgroup_taskset *tset) ret = mem_cgroup_precharge_mc(mm); if (ret) mem_cgroup_clear_mc(); + } else { + mmput(mm); } - mmput(mm); return ret; } @@ -4852,11 +4860,11 @@ put: /* get_mctgt_type() gets the page */ return ret; } -static void mem_cgroup_move_charge(struct mm_struct *mm) +static void mem_cgroup_move_charge(void) { struct mm_walk mem_cgroup_move_charge_walk = { .pmd_entry = mem_cgroup_move_charge_pte_range, - .mm = mm, + .mm = mc.mm, }; lru_add_drain_all(); @@ -4868,7 +4876,7 @@ static void mem_cgroup_move_charge(struct mm_struct *mm) atomic_inc(&mc.from->moving_account); synchronize_rcu(); retry: - if (unlikely(!down_read_trylock(&mm->mmap_sem))) { + if (unlikely(!down_read_trylock(&mc.mm->mmap_sem))) { /* * Someone who are holding the mmap_sem might be waiting in * waitq. So we cancel all extra charges, wake up all waiters, @@ -4885,23 +4893,16 @@ retry: * additional charge, the page walk just aborts. */ walk_page_range(0, ~0UL, &mem_cgroup_move_charge_walk); - up_read(&mm->mmap_sem); + up_read(&mc.mm->mmap_sem); atomic_dec(&mc.from->moving_account); } -static void mem_cgroup_move_task(struct cgroup_taskset *tset) +static void mem_cgroup_move_task(void) { - struct cgroup_subsys_state *css; - struct task_struct *p = cgroup_taskset_first(tset, &css); - struct mm_struct *mm = get_task_mm(p); - - if (mm) { - if (mc.to) - mem_cgroup_move_charge(mm); - mmput(mm); - } - if (mc.to) + if (mc.to) { + mem_cgroup_move_charge(); mem_cgroup_clear_mc(); + } } #else /* !CONFIG_MMU */ static int mem_cgroup_can_attach(struct cgroup_taskset *tset) @@ -4911,7 +4912,7 @@ static int mem_cgroup_can_attach(struct cgroup_taskset *tset) static void mem_cgroup_cancel_attach(struct cgroup_taskset *tset) { } -static void mem_cgroup_move_task(struct cgroup_taskset *tset) +static void mem_cgroup_move_task(void) { } #endif @@ -5195,7 +5196,7 @@ struct cgroup_subsys memory_cgrp_subsys = { .css_reset = mem_cgroup_css_reset, .can_attach = mem_cgroup_can_attach, .cancel_attach = mem_cgroup_cancel_attach, - .attach = mem_cgroup_move_task, + .post_attach = mem_cgroup_move_task, .bind = mem_cgroup_bind, .dfl_cftypes = memory_files, .legacy_cftypes = mem_cgroup_legacy_files, -- cgit v0.10.2 From 3d6d30d60abb19ba9a20e53ce65b18a9c148fcd1 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Fri, 22 Apr 2016 13:09:13 +0200 Subject: cxgbi: fix uninitialized flowi6 ip6_route_output looks into different fields in the passed flowi6 structure, yet cxgbi passes garbage in nearly all those fields. Zero the structure out first. Fixes: fc8d0590d9142 ("libcxgbi: Add ipv6 api to driver") Signed-off-by: Jiri Benc Signed-off-by: David S. Miller diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index f3bb7af..ead83a2 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -688,6 +688,7 @@ static struct rt6_info *find_route_ipv6(const struct in6_addr *saddr, { struct flowi6 fl; + memset(&fl, 0, sizeof(fl)); if (saddr) memcpy(&fl.saddr, saddr, sizeof(struct in6_addr)); if (daddr) -- cgit v0.10.2 From 1becf03545a0859ceaaf9e8c2d9861882a71cb01 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Apr 2016 19:53:59 -0700 Subject: cpufreq: intel_pstate: Fix processing for turbo activation ratio When the config TDP level is not nominal (level = 0), the MSR values for reading level 1 and level 2 ratios contain power in low 14 bits and actual ratio bits are at bits [23:16]. The current processing for level 1 and level 2 is wrong as there is no shift done to get actual ratio. Fixes: 6a35fc2d6c22 (cpufreq: intel_pstate: get P1 from TAR when available) Signed-off-by: Srinivas Pandruvada Cc: 4.4+ # 4.4+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 30fe323..f502d5b 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -813,6 +813,11 @@ static int core_get_max_pstate(void) if (err) goto skip_tar; + /* For level 1 and 2, bits[23:16] contain the ratio */ + if (tdp_ctrl) + tdp_ratio >>= 16; + + tdp_ratio &= 0xff; /* ratios are only 8 bits long */ if (tdp_ratio - 1 == tar) { max_pstate = tar; pr_debug("max_pstate=TAC %x\n", max_pstate); -- cgit v0.10.2 From 9f5db53507b6607dc1b5d59547097966c0e71047 Mon Sep 17 00:00:00 2001 From: Ivan Babrou Date: Sat, 23 Apr 2016 12:58:03 +0000 Subject: net: dummy: remove note about being Y by default Signed-off-by: Ivan Babrou Signed-off-by: David S. Miller diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a24c18e..befd67d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -62,9 +62,8 @@ config DUMMY this device is consigned into oblivion) with a configurable IP address. It is most commonly used in order to make your currently inactive SLIP address seem like a real address for local programs. - If you use SLIP or PPP, you might want to say Y here. Since this - thing often comes in handy, the default is Y. It won't enlarge your - kernel either. What a deal. Read about it in the Network + If you use SLIP or PPP, you might want to say Y here. It won't + enlarge your kernel. What a deal. Read about it in the Network Administrator's Guide, available from . -- cgit v0.10.2 From fc96256c906362e845d848d0f6a6354450059e81 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 23 Apr 2016 11:35:46 -0700 Subject: net/mlx4_en: fix spurious timestamping callbacks When multiple skb are TX-completed in a row, we might incorrectly keep a timestamp of a prior skb and cause extra work. Fixes: ec693d47010e8 ("net/mlx4_en: Add HW timestamping (TS) support") Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Reviewed-by: Eran Ben Elisha Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index c0d7b72..a386f04 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -405,7 +405,6 @@ static bool mlx4_en_process_tx_cq(struct net_device *dev, u32 packets = 0; u32 bytes = 0; int factor = priv->cqe_factor; - u64 timestamp = 0; int done = 0; int budget = priv->tx_work_limit; u32 last_nr_txbb; @@ -445,9 +444,12 @@ static bool mlx4_en_process_tx_cq(struct net_device *dev, new_index = be16_to_cpu(cqe->wqe_index) & size_mask; do { + u64 timestamp = 0; + txbbs_skipped += last_nr_txbb; ring_index = (ring_index + last_nr_txbb) & size_mask; - if (ring->tx_info[ring_index].ts_requested) + + if (unlikely(ring->tx_info[ring_index].ts_requested)) timestamp = mlx4_en_get_cqe_ts(cqe); /* free next descriptor */ -- cgit v0.10.2 From 037e119738120c1cdc460c6ae33871c3000531f3 Mon Sep 17 00:00:00 2001 From: Conrad Kostecki Date: Tue, 26 Apr 2016 10:08:10 +0200 Subject: ALSA: hda - Add dock support for ThinkPad X260 Fixes audio output on a ThinkPad X260, when using Lenovo CES 2013 docking station series (basic, pro, ultra). Signed-off-by: Conrad Kostecki Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 810bcee..ac4490a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5584,6 +5584,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x5034, "Thinkpad T450", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x5036, "Thinkpad T450s", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x503c, "Thinkpad L450", ALC292_FIXUP_TPT440_DOCK), + SND_PCI_QUIRK(0x17aa, 0x504a, "ThinkPad X260", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x504b, "Thinkpad", ALC293_FIXUP_LENOVO_SPK_NOISE), SND_PCI_QUIRK(0x17aa, 0x5109, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), -- cgit v0.10.2 From bb03ed216370cb021f377f923471e56d1de3ff5d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 21 Apr 2016 16:39:17 +0200 Subject: ALSA: hda - Update BCLK also at hotplug for i915 HSW/BDW The recent bug report suggests that BCLK setup for i915 HSW/BDW needs to be updated at each HDMI hotplug, not only at initialization and resume. That is, we need to update HSW_EM4 and HSW_EM5 registers at ELD notification, too. Otherwise the HDMI audio may be out of sync and played in a wrong pitch. However, the HDA codec driver has no access to the controller registers, and currently the code managing these registers is in hda_intel.c, i.e. local to the controller driver. For allowing the explicit BCLK update from the codec driver, as in this patch, the former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and exposed as snd_hdac_i915_set_bclk(). This is called from both the HDA controller driver and intel_pin_eld_notify() in HDMI codec driver. Along with this change, snd_hdac_get_display_clk() gets dropped as it's no longer used. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410 Cc: # v4.5+ Signed-off-by: Takashi Iwai diff --git a/include/sound/hda_i915.h b/include/sound/hda_i915.h index fa341fc..f5842bc 100644 --- a/include/sound/hda_i915.h +++ b/include/sound/hda_i915.h @@ -9,7 +9,7 @@ #ifdef CONFIG_SND_HDA_I915 int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable); int snd_hdac_display_power(struct hdac_bus *bus, bool enable); -int snd_hdac_get_display_clk(struct hdac_bus *bus); +void snd_hdac_i915_set_bclk(struct hdac_bus *bus); int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate); int snd_hdac_acomp_get_eld(struct hdac_bus *bus, hda_nid_t nid, bool *audio_enabled, char *buffer, int max_bytes); @@ -25,9 +25,8 @@ static inline int snd_hdac_display_power(struct hdac_bus *bus, bool enable) { return 0; } -static inline int snd_hdac_get_display_clk(struct hdac_bus *bus) +static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus) { - return 0; } static inline int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate) diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c index 54babe1..607bbea 100644 --- a/sound/hda/hdac_i915.c +++ b/sound/hda/hdac_i915.c @@ -20,6 +20,7 @@ #include #include #include +#include static struct i915_audio_component *hdac_acomp; @@ -97,26 +98,65 @@ int snd_hdac_display_power(struct hdac_bus *bus, bool enable) } EXPORT_SYMBOL_GPL(snd_hdac_display_power); +#define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \ + ((pci)->device == 0x0c0c) || \ + ((pci)->device == 0x0d0c) || \ + ((pci)->device == 0x160c)) + /** - * snd_hdac_get_display_clk - Get CDCLK in kHz + * snd_hdac_i915_set_bclk - Reprogram BCLK for HSW/BDW * @bus: HDA core bus * - * This function is supposed to be used only by a HD-audio controller - * driver that needs the interaction with i915 graphics. + * Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK + * depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value) + * are used to convert CDClk (Core Display Clock) to 24MHz BCLK: + * BCLK = CDCLK * M / N + * The values will be lost when the display power well is disabled and need to + * be restored to avoid abnormal playback speed. * - * This function queries CDCLK value in kHz from the graphics driver and - * returns the value. A negative code is returned in error. + * Call this function at initializing and changing power well, as well as + * at ELD notifier for the hotplug. */ -int snd_hdac_get_display_clk(struct hdac_bus *bus) +void snd_hdac_i915_set_bclk(struct hdac_bus *bus) { struct i915_audio_component *acomp = bus->audio_component; + struct pci_dev *pci = to_pci_dev(bus->dev); + int cdclk_freq; + unsigned int bclk_m, bclk_n; + + if (!acomp || !acomp->ops || !acomp->ops->get_cdclk_freq) + return; /* only for i915 binding */ + if (!CONTROLLER_IN_GPU(pci)) + return; /* only HSW/BDW */ + + cdclk_freq = acomp->ops->get_cdclk_freq(acomp->dev); + switch (cdclk_freq) { + case 337500: + bclk_m = 16; + bclk_n = 225; + break; + + case 450000: + default: /* default CDCLK 450MHz */ + bclk_m = 4; + bclk_n = 75; + break; + + case 540000: + bclk_m = 4; + bclk_n = 90; + break; + + case 675000: + bclk_m = 8; + bclk_n = 225; + break; + } - if (!acomp || !acomp->ops) - return -ENODEV; - - return acomp->ops->get_cdclk_freq(acomp->dev); + snd_hdac_chip_writew(bus, HSW_EM4, bclk_m); + snd_hdac_chip_writew(bus, HSW_EM5, bclk_n); } -EXPORT_SYMBOL_GPL(snd_hdac_get_display_clk); +EXPORT_SYMBOL_GPL(snd_hdac_i915_set_bclk); /* There is a fixed mapping between audio pin node and display port * on current Intel platforms: diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 637b8a0..9a0d144 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -857,50 +857,6 @@ static int param_set_xint(const char *val, const struct kernel_param *kp) #define azx_del_card_list(chip) /* NOP */ #endif /* CONFIG_PM */ -/* Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK - * depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value) - * are used to convert CDClk (Core Display Clock) to 24MHz BCLK: - * BCLK = CDCLK * M / N - * The values will be lost when the display power well is disabled and need to - * be restored to avoid abnormal playback speed. - */ -static void haswell_set_bclk(struct hda_intel *hda) -{ - struct azx *chip = &hda->chip; - int cdclk_freq; - unsigned int bclk_m, bclk_n; - - if (!hda->need_i915_power) - return; - - cdclk_freq = snd_hdac_get_display_clk(azx_bus(chip)); - switch (cdclk_freq) { - case 337500: - bclk_m = 16; - bclk_n = 225; - break; - - case 450000: - default: /* default CDCLK 450MHz */ - bclk_m = 4; - bclk_n = 75; - break; - - case 540000: - bclk_m = 4; - bclk_n = 90; - break; - - case 675000: - bclk_m = 8; - bclk_n = 225; - break; - } - - azx_writew(chip, HSW_EM4, bclk_m); - azx_writew(chip, HSW_EM5, bclk_n); -} - #if defined(CONFIG_PM_SLEEP) || defined(SUPPORT_VGA_SWITCHEROO) /* * power management @@ -958,7 +914,7 @@ static int azx_resume(struct device *dev) if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL && hda->need_i915_power) { snd_hdac_display_power(azx_bus(chip), true); - haswell_set_bclk(hda); + snd_hdac_i915_set_bclk(azx_bus(chip)); } if (chip->msi) if (pci_enable_msi(pci) < 0) @@ -1058,7 +1014,7 @@ static int azx_runtime_resume(struct device *dev) bus = azx_bus(chip); if (hda->need_i915_power) { snd_hdac_display_power(bus, true); - haswell_set_bclk(hda); + snd_hdac_i915_set_bclk(bus); } else { /* toggle codec wakeup bit for STATESTS read */ snd_hdac_set_codec_wakeup(bus, true); @@ -1796,12 +1752,8 @@ static int azx_first_init(struct azx *chip) /* initialize chip */ azx_init_pci(chip); - if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) { - struct hda_intel *hda; - - hda = container_of(chip, struct hda_intel, chip); - haswell_set_bclk(hda); - } + if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) + snd_hdac_i915_set_bclk(bus); hda_intel_init_chip(chip, (probe_only[dev] & 2) == 0); diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 40933aa..1483f85 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2232,6 +2232,7 @@ static void intel_pin_eld_notify(void *audio_ptr, int port) if (atomic_read(&(codec)->core.in_pm)) return; + snd_hdac_i915_set_bclk(&codec->bus->core); check_presence_and_report(codec, pin_nid); } -- cgit v0.10.2 From 978fa436231a834dc686292efc7d944d9013e035 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Fri, 22 Apr 2016 16:18:02 +0100 Subject: drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems Currently ARM CPUs DT bindings allows different enable-method value for PSCI based systems. On ARM 64-bit this property is required and must be "psci" while on ARM 32-bit systems this property is optional and must be "arm,psci" if present. However, "arm,psci" has always been the compatible string for the PSCI node, and was never intended to be the enable-method. So this is a bug in the binding and not a deliberate attempt at specifying 32-bit differently. This is problematic if 32-bit OS is run on 64-bit system which has "psci" as enable-method rather than the expected "arm,psci". So let's unify the value into "psci" and remove support for "arm,psci" before it finds any users. Reported-by: Soby Mathew Cc: Rob Herring Acked-by: Mark Rutland Acked-by: Lorenzo Pieralisi Signed-off-by: Sudeep Holla Signed-off-by: Arnd Bergmann diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index ccc62f1..3f0cbbb 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -192,7 +192,6 @@ nodes to be present and contain the properties described below. can be one of: "allwinner,sun6i-a31" "allwinner,sun8i-a23" - "arm,psci" "arm,realview-smp" "brcm,bcm-nsp-smp" "brcm,brahma-b15" diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c index 11bfee8..b5d0580 100644 --- a/drivers/firmware/psci.c +++ b/drivers/firmware/psci.c @@ -360,7 +360,7 @@ static struct cpuidle_ops psci_cpuidle_ops __initdata = { .init = psci_dt_cpu_init_idle, }; -CPUIDLE_METHOD_OF_DECLARE(psci, "arm,psci", &psci_cpuidle_ops); +CPUIDLE_METHOD_OF_DECLARE(psci, "psci", &psci_cpuidle_ops); #endif #endif -- cgit v0.10.2 From 346c09f80459a3ad97df1816d6d606169a51001a Mon Sep 17 00:00:00 2001 From: Roman Pen Date: Tue, 26 Apr 2016 13:15:35 +0200 Subject: workqueue: fix ghost PENDING flag while doing MQ IO The bug in a workqueue leads to a stalled IO request in MQ ctx->rq_list with the following backtrace: [ 601.347452] INFO: task kworker/u129:5:1636 blocked for more than 120 seconds. [ 601.347574] Tainted: G O 4.4.5-1-storage+ #6 [ 601.347651] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 601.348142] kworker/u129:5 D ffff880803077988 0 1636 2 0x00000000 [ 601.348519] Workqueue: ibnbd_server_fileio_wq ibnbd_dev_file_submit_io_worker [ibnbd_server] [ 601.348999] ffff880803077988 ffff88080466b900 ffff8808033f9c80 ffff880803078000 [ 601.349662] ffff880807c95000 7fffffffffffffff ffffffff815b0920 ffff880803077ad0 [ 601.350333] ffff8808030779a0 ffffffff815b01d5 0000000000000000 ffff880803077a38 [ 601.350965] Call Trace: [ 601.351203] [] ? bit_wait+0x60/0x60 [ 601.351444] [] schedule+0x35/0x80 [ 601.351709] [] schedule_timeout+0x192/0x230 [ 601.351958] [] ? blk_flush_plug_list+0xc7/0x220 [ 601.352208] [] ? ktime_get+0x37/0xa0 [ 601.352446] [] ? bit_wait+0x60/0x60 [ 601.352688] [] io_schedule_timeout+0xa4/0x110 [ 601.352951] [] ? _raw_spin_unlock_irqrestore+0xe/0x10 [ 601.353196] [] bit_wait_io+0x1b/0x70 [ 601.353440] [] __wait_on_bit+0x5d/0x90 [ 601.353689] [] wait_on_page_bit+0xc0/0xd0 [ 601.353958] [] ? autoremove_wake_function+0x40/0x40 [ 601.354200] [] __filemap_fdatawait_range+0xe4/0x140 [ 601.354441] [] filemap_fdatawait_range+0x14/0x30 [ 601.354688] [] filemap_write_and_wait_range+0x3f/0x70 [ 601.354932] [] blkdev_fsync+0x1b/0x50 [ 601.355193] [] vfs_fsync_range+0x49/0xa0 [ 601.355432] [] blkdev_write_iter+0xca/0x100 [ 601.355679] [] __vfs_write+0xaa/0xe0 [ 601.355925] [] vfs_write+0xa9/0x1a0 [ 601.356164] [] kernel_write+0x38/0x50 The underlying device is a null_blk, with default parameters: queue_mode = MQ submit_queues = 1 Verification that nullb0 has something inflight: root@pserver8:~# cat /sys/block/nullb0/inflight 0 1 root@pserver8:~# find /sys/block/nullb0/mq/0/cpu* -name rq_list -print -exec cat {} \; ... /sys/block/nullb0/mq/0/cpu2/rq_list CTX pending: ffff8838038e2400 ... During debug it became clear that stalled request is always inserted in the rq_list from the following path: save_stack_trace_tsk + 34 blk_mq_insert_requests + 231 blk_mq_flush_plug_list + 281 blk_flush_plug_list + 199 wait_on_page_bit + 192 __filemap_fdatawait_range + 228 filemap_fdatawait_range + 20 filemap_write_and_wait_range + 63 blkdev_fsync + 27 vfs_fsync_range + 73 blkdev_write_iter + 202 __vfs_write + 170 vfs_write + 169 kernel_write + 56 So blk_flush_plug_list() was called with from_schedule == true. If from_schedule is true, that means that finally blk_mq_insert_requests() offloads execution of __blk_mq_run_hw_queue() and uses kblockd workqueue, i.e. it calls kblockd_schedule_delayed_work_on(). That means, that we race with another CPU, which is about to execute __blk_mq_run_hw_queue() work. Further debugging shows the following traces from different CPUs: CPU#0 CPU#1 ---------------------------------- ------------------------------- reqeust A inserted STORE hctx->ctx_map[0] bit marked kblockd_schedule...() returns 1 request B inserted STORE hctx->ctx_map[1] bit marked kblockd_schedule...() returns 0 *** WORK PENDING bit is cleared *** flush_busy_ctxs() is executed, but bit 1, set by CPU#1, is not observed As a result request B pended forever. This behaviour can be explained by speculative LOAD of hctx->ctx_map on CPU#0, which is reordered with clear of PENDING bit and executed _before_ actual STORE of bit 1 on CPU#1. The proper fix is an explicit full barrier , which guarantees that clear of PENDING bit is to be executed before all possible speculative LOADS or STORES inside actual work function. Signed-off-by: Roman Pen Cc: Gioh Kim Cc: Michael Wang Cc: Tejun Heo Cc: Jens Axboe Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 16e13d8..801a698 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -666,6 +666,35 @@ static void set_work_pool_and_clear_pending(struct work_struct *work, */ smp_wmb(); set_work_data(work, (unsigned long)pool_id << WORK_OFFQ_POOL_SHIFT, 0); + /* + * The following mb guarantees that previous clear of a PENDING bit + * will not be reordered with any speculative LOADS or STORES from + * work->current_func, which is executed afterwards. This possible + * reordering can lead to a missed execution on attempt to qeueue + * the same @work. E.g. consider this case: + * + * CPU#0 CPU#1 + * ---------------------------- -------------------------------- + * + * 1 STORE event_indicated + * 2 queue_work_on() { + * 3 test_and_set_bit(PENDING) + * 4 } set_..._and_clear_pending() { + * 5 set_work_data() # clear bit + * 6 smp_mb() + * 7 work->current_func() { + * 8 LOAD event_indicated + * } + * + * Without an explicit full barrier speculative LOAD on line 8 can + * be executed before CPU#0 does STORE on line 1. If that happens, + * CPU#0 observes the PENDING bit is still set and new execution of + * a @work is not queued in a hope, that CPU#1 will eventually + * finish the queued @work. Meanwhile CPU#1 does not see + * event_indicated is set, because speculative LOAD was executed + * before actual STORE. + */ + smp_mb(); } static void clear_work_data(struct work_struct *work) -- cgit v0.10.2 From 6a923934c33c750a595868af6bef5f1a1fa90054 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 26 Apr 2016 11:47:41 -0400 Subject: Revert "ipv6: Revert optional address flusing on ifdown." This reverts commit 841645b5f2dfceac69b78fcd0c9050868d41ea61. Ok, this puts the feature back. I've decided to apply David A.'s bug fix and run with that rather than make everyone wait another whole release for this feature. Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index e0ac252..b183e2b 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1568,6 +1568,15 @@ temp_prefered_lft - INTEGER Preferred lifetime (in seconds) for temporary addresses. Default: 86400 (1 day) +keep_addr_on_down - INTEGER + Keep all IPv6 addresses on an interface down event. If set static + global addresses with no expiration time are not flushed. + >0 : enabled + 0 : system default + <0 : disabled + + Default: 0 (addresses are removed) + max_desync_factor - INTEGER Maximum value for DESYNC_FACTOR, which is a random value that ensures that clients don't synchronize with each diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 4b2267e..7edc14f 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -62,6 +62,7 @@ struct ipv6_devconf { struct in6_addr secret; } stable_secret; __s32 use_oif_addrs_only; + __s32 keep_addr_on_down; void *sysctl; }; diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index ec117b6..3958760 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -176,6 +176,7 @@ enum { DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN, DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, DEVCONF_DROP_UNSOLICITED_NA, + DEVCONF_KEEP_ADDR_ON_DOWN, DEVCONF_MAX }; diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d77ba39..23cec53 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -216,6 +216,7 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = { }, .use_oif_addrs_only = 0, .ignore_routes_with_linkdown = 0, + .keep_addr_on_down = 0, }; static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = { @@ -260,6 +261,7 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = { }, .use_oif_addrs_only = 0, .ignore_routes_with_linkdown = 0, + .keep_addr_on_down = 0, }; /* Check if a valid qdisc is available */ @@ -3174,6 +3176,81 @@ static void addrconf_gre_config(struct net_device *dev) } #endif +#if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV) +/* If the host route is cached on the addr struct make sure it is associated + * with the proper table. e.g., enslavement can change and if so the cached + * host route needs to move to the new table. + */ +static void l3mdev_check_host_rt(struct inet6_dev *idev, + struct inet6_ifaddr *ifp) +{ + if (ifp->rt) { + u32 tb_id = l3mdev_fib_table(idev->dev) ? : RT6_TABLE_LOCAL; + + if (tb_id != ifp->rt->rt6i_table->tb6_id) { + ip6_del_rt(ifp->rt); + ifp->rt = NULL; + } + } +} +#else +static void l3mdev_check_host_rt(struct inet6_dev *idev, + struct inet6_ifaddr *ifp) +{ +} +#endif + +static int fixup_permanent_addr(struct inet6_dev *idev, + struct inet6_ifaddr *ifp) +{ + l3mdev_check_host_rt(idev, ifp); + + if (!ifp->rt) { + struct rt6_info *rt; + + rt = addrconf_dst_alloc(idev, &ifp->addr, false); + if (unlikely(IS_ERR(rt))) + return PTR_ERR(rt); + + ifp->rt = rt; + } + + if (!(ifp->flags & IFA_F_NOPREFIXROUTE)) { + addrconf_prefix_route(&ifp->addr, ifp->prefix_len, + idev->dev, 0, 0); + } + + addrconf_dad_start(ifp); + + return 0; +} + +static void addrconf_permanent_addr(struct net_device *dev) +{ + struct inet6_ifaddr *ifp, *tmp; + struct inet6_dev *idev; + + idev = __in6_dev_get(dev); + if (!idev) + return; + + write_lock_bh(&idev->lock); + + list_for_each_entry_safe(ifp, tmp, &idev->addr_list, if_list) { + if ((ifp->flags & IFA_F_PERMANENT) && + fixup_permanent_addr(idev, ifp) < 0) { + write_unlock_bh(&idev->lock); + ipv6_del_addr(ifp); + write_lock_bh(&idev->lock); + + net_info_ratelimited("%s: Failed to add prefix route for address %pI6c; dropping\n", + idev->dev->name, &ifp->addr); + } + } + + write_unlock_bh(&idev->lock); +} + static int addrconf_notify(struct notifier_block *this, unsigned long event, void *ptr) { @@ -3260,6 +3337,9 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, run_pending = 1; } + /* restore routes for permanent addresses */ + addrconf_permanent_addr(dev); + switch (dev->type) { #if IS_ENABLED(CONFIG_IPV6_SIT) case ARPHRD_SIT: @@ -3368,11 +3448,20 @@ static void addrconf_type_change(struct net_device *dev, unsigned long event) ipv6_mc_unmap(idev); } +static bool addr_is_local(const struct in6_addr *addr) +{ + return ipv6_addr_type(addr) & + (IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK); +} + static int addrconf_ifdown(struct net_device *dev, int how) { struct net *net = dev_net(dev); struct inet6_dev *idev; - struct inet6_ifaddr *ifa; + struct inet6_ifaddr *ifa, *tmp; + struct list_head del_list; + int _keep_addr; + bool keep_addr; int state, i; ASSERT_RTNL(); @@ -3399,6 +3488,16 @@ static int addrconf_ifdown(struct net_device *dev, int how) } + /* aggregate the system setting and interface setting */ + _keep_addr = net->ipv6.devconf_all->keep_addr_on_down; + if (!_keep_addr) + _keep_addr = idev->cnf.keep_addr_on_down; + + /* combine the user config with event to determine if permanent + * addresses are to be removed from address hash table + */ + keep_addr = !(how || _keep_addr <= 0); + /* Step 2: clear hash table */ for (i = 0; i < IN6_ADDR_HSIZE; i++) { struct hlist_head *h = &inet6_addr_lst[i]; @@ -3407,9 +3506,16 @@ static int addrconf_ifdown(struct net_device *dev, int how) restart: hlist_for_each_entry_rcu(ifa, h, addr_lst) { if (ifa->idev == idev) { - hlist_del_init_rcu(&ifa->addr_lst); addrconf_del_dad_work(ifa); - goto restart; + /* combined flag + permanent flag decide if + * address is retained on a down event + */ + if (!keep_addr || + !(ifa->flags & IFA_F_PERMANENT) || + addr_is_local(&ifa->addr)) { + hlist_del_init_rcu(&ifa->addr_lst); + goto restart; + } } } spin_unlock_bh(&addrconf_hash_lock); @@ -3443,31 +3549,54 @@ restart: write_lock_bh(&idev->lock); } - while (!list_empty(&idev->addr_list)) { - ifa = list_first_entry(&idev->addr_list, - struct inet6_ifaddr, if_list); - addrconf_del_dad_work(ifa); + /* re-combine the user config with event to determine if permanent + * addresses are to be removed from the interface list + */ + keep_addr = (!how && _keep_addr > 0); - list_del(&ifa->if_list); + INIT_LIST_HEAD(&del_list); + list_for_each_entry_safe(ifa, tmp, &idev->addr_list, if_list) { + addrconf_del_dad_work(ifa); write_unlock_bh(&idev->lock); - spin_lock_bh(&ifa->lock); - state = ifa->state; - ifa->state = INET6_IFADDR_STATE_DEAD; + + if (keep_addr && (ifa->flags & IFA_F_PERMANENT) && + !addr_is_local(&ifa->addr)) { + /* set state to skip the notifier below */ + state = INET6_IFADDR_STATE_DEAD; + ifa->state = 0; + if (!(ifa->flags & IFA_F_NODAD)) + ifa->flags |= IFA_F_TENTATIVE; + } else { + state = ifa->state; + ifa->state = INET6_IFADDR_STATE_DEAD; + + list_del(&ifa->if_list); + list_add(&ifa->if_list, &del_list); + } + spin_unlock_bh(&ifa->lock); if (state != INET6_IFADDR_STATE_DEAD) { __ipv6_ifa_notify(RTM_DELADDR, ifa); inet6addr_notifier_call_chain(NETDEV_DOWN, ifa); } - in6_ifa_put(ifa); write_lock_bh(&idev->lock); } write_unlock_bh(&idev->lock); + /* now clean up addresses to be removed */ + while (!list_empty(&del_list)) { + ifa = list_first_entry(&del_list, + struct inet6_ifaddr, if_list); + list_del(&ifa->if_list); + + in6_ifa_put(ifa); + } + /* Step 5: Discard anycast and multicast list */ if (how) { ipv6_ac_destroy_dev(idev); @@ -4732,6 +4861,7 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf, array[DEVCONF_USE_OIF_ADDRS_ONLY] = cnf->use_oif_addrs_only; array[DEVCONF_DROP_UNICAST_IN_L2_MULTICAST] = cnf->drop_unicast_in_l2_multicast; array[DEVCONF_DROP_UNSOLICITED_NA] = cnf->drop_unsolicited_na; + array[DEVCONF_KEEP_ADDR_ON_DOWN] = cnf->keep_addr_on_down; } static inline size_t inet6_ifla6_size(void) @@ -5820,6 +5950,14 @@ static struct addrconf_sysctl_table .proc_handler = proc_dointvec, }, { + .procname = "keep_addr_on_down", + .data = &ipv6_devconf.keep_addr_on_down, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec, + + }, + { /* sentinel */ } }, -- cgit v0.10.2 From 38bd10c447f8e8980753149a8a65108159871df5 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 21 Apr 2016 20:56:12 -0700 Subject: net: ipv6: Delete host routes on an ifdown It was a simple idea -- save IPv6 configured addresses on a link down so that IPv6 behaves similar to IPv4. As always the devil is in the details and the IPv6 stack as too many behavioral differences from IPv4 making the simple idea more complicated than it needs to be. The current implementation for keeping IPv6 addresses can panic or spit out a warning in one of many paths: 1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in rt6_fill_node while handling a route dump request. 2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in fib6_del 3. Panic in fib6_purge_rt because rt6i_ref count is not 1. The root cause of all these is references related to the host route for an address that is retained. So, this patch deletes the host route every time the ifdown loop runs. Since the host route is deleted and will be re-generated an up there is no longer a need for the l3mdev fix up. On the 'admin up' side move addrconf_permanent_addr into the NETDEV_UP event handling so that it runs only once versus on UP and CHANGE events. All of the current panics and warnings appear to be related to addresses on the loopback device, but given the catastrophic nature when a bug is triggered this patch takes the conservative approach and evicts all host routes rather than trying to determine when it can be re-used and when it can not. That can be a later optimizaton if desired. Signed-off-by: David Ahern Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 23cec53..8ec4b30 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3176,35 +3176,9 @@ static void addrconf_gre_config(struct net_device *dev) } #endif -#if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV) -/* If the host route is cached on the addr struct make sure it is associated - * with the proper table. e.g., enslavement can change and if so the cached - * host route needs to move to the new table. - */ -static void l3mdev_check_host_rt(struct inet6_dev *idev, - struct inet6_ifaddr *ifp) -{ - if (ifp->rt) { - u32 tb_id = l3mdev_fib_table(idev->dev) ? : RT6_TABLE_LOCAL; - - if (tb_id != ifp->rt->rt6i_table->tb6_id) { - ip6_del_rt(ifp->rt); - ifp->rt = NULL; - } - } -} -#else -static void l3mdev_check_host_rt(struct inet6_dev *idev, - struct inet6_ifaddr *ifp) -{ -} -#endif - static int fixup_permanent_addr(struct inet6_dev *idev, struct inet6_ifaddr *ifp) { - l3mdev_check_host_rt(idev, ifp); - if (!ifp->rt) { struct rt6_info *rt; @@ -3304,6 +3278,9 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, break; if (event == NETDEV_UP) { + /* restore routes for permanent addresses */ + addrconf_permanent_addr(dev); + if (!addrconf_qdisc_ok(dev)) { /* device is not ready yet. */ pr_info("ADDRCONF(NETDEV_UP): %s: link is not ready\n", @@ -3337,9 +3314,6 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, run_pending = 1; } - /* restore routes for permanent addresses */ - addrconf_permanent_addr(dev); - switch (dev->type) { #if IS_ENABLED(CONFIG_IPV6_SIT) case ARPHRD_SIT: @@ -3556,6 +3530,8 @@ restart: INIT_LIST_HEAD(&del_list); list_for_each_entry_safe(ifa, tmp, &idev->addr_list, if_list) { + struct rt6_info *rt = NULL; + addrconf_del_dad_work(ifa); write_unlock_bh(&idev->lock); @@ -3568,6 +3544,9 @@ restart: ifa->state = 0; if (!(ifa->flags & IFA_F_NODAD)) ifa->flags |= IFA_F_TENTATIVE; + + rt = ifa->rt; + ifa->rt = NULL; } else { state = ifa->state; ifa->state = INET6_IFADDR_STATE_DEAD; @@ -3578,6 +3557,9 @@ restart: spin_unlock_bh(&ifa->lock); + if (rt) + ip6_del_rt(rt); + if (state != INET6_IFADDR_STATE_DEAD) { __ipv6_ifa_notify(RTM_DELADDR, ifa); inet6addr_notifier_call_chain(NETDEV_DOWN, ifa); @@ -5343,10 +5325,10 @@ static void __ipv6_ifa_notify(int event, struct inet6_ifaddr *ifp) if (rt) ip6_del_rt(rt); } - dst_hold(&ifp->rt->dst); - - ip6_del_rt(ifp->rt); - + if (ifp->rt) { + dst_hold(&ifp->rt->dst); + ip6_del_rt(ifp->rt); + } rt_genid_bump_ipv6(net); break; } -- cgit v0.10.2 From 42235f80ab205bf5020cf33cb3e94455410abe36 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 26 Apr 2016 17:55:38 +0300 Subject: IB/core: Don't drain non-existent rq queue-pair The drain_rq function expects a normal receive qp to drain. A qp can only have either a normal rq or an srq. If there is an srq, there is no rq to drain. Until the API supports draining SRQs, simply skip draining the rq when the qp has an srq attached. Fixes: 765d67748bcf ("IB: new common API for draining queues") Signed-off-by: Sagi Grimberg Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 15b8adb..b65b354 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -1860,6 +1860,7 @@ EXPORT_SYMBOL(ib_drain_rq); void ib_drain_qp(struct ib_qp *qp) { ib_drain_sq(qp); - ib_drain_rq(qp); + if (!qp->srq) + ib_drain_rq(qp); } EXPORT_SYMBOL(ib_drain_qp); -- cgit v0.10.2 From 851d7b6b8a954b28f85e62a53cbba472907e21e4 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 12 Apr 2016 06:54:54 -0700 Subject: iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb4 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: 170003c894d9 ("iw_cxgb4: remove port mapper related code") Signed-off-by: Steve Wise Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/provider.c b/drivers/infiniband/hw/cxgb4/provider.c index 124682d..7574f394 100644 --- a/drivers/infiniband/hw/cxgb4/provider.c +++ b/drivers/infiniband/hw/cxgb4/provider.c @@ -580,6 +580,8 @@ int c4iw_register_device(struct c4iw_dev *dev) dev->ibdev.iwcm->add_ref = c4iw_qp_add_ref; dev->ibdev.iwcm->rem_ref = c4iw_qp_rem_ref; dev->ibdev.iwcm->get_qp = c4iw_get_qp; + memcpy(dev->ibdev.iwcm->ifname, dev->rdev.lldi.ports[0]->name, + sizeof(dev->ibdev.iwcm->ifname)); ret = ib_register_device(&dev->ibdev, NULL); if (ret) -- cgit v0.10.2 From ad202348fe3fa8187c43af5ab5b86fe6de057bd3 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 12 Apr 2016 06:55:01 -0700 Subject: iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb3 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: c1340e8aa628 ("iw_cxgb3: support for iWARP port mapping") Signed-off-by: Steve Wise Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 42a7b89..3234a8b 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1390,6 +1390,8 @@ int iwch_register_device(struct iwch_dev *dev) dev->ibdev.iwcm->add_ref = iwch_qp_add_ref; dev->ibdev.iwcm->rem_ref = iwch_qp_rem_ref; dev->ibdev.iwcm->get_qp = iwch_get_qp; + memcpy(dev->ibdev.iwcm->ifname, dev->rdev.t3cdev_p->lldev->name, + sizeof(dev->ibdev.iwcm->ifname)); ret = ib_register_device(&dev->ibdev, NULL); if (ret) -- cgit v0.10.2 From 40edd7fdfc8a2c838c313b982f318cd69e638750 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 12 Apr 2016 06:55:03 -0700 Subject: iw_cxgb4: handle draining an idle qp In c4iw_drain_sq/rq(), if the particular queue is already empty then don't block. Fixes: ce4af14d94aa ('iw_cxgb4: add queue drain functions') Signed-off-by: Steve Wise Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index e17fb5d5..8aa2e52 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -1895,13 +1895,27 @@ int c4iw_ib_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, void c4iw_drain_sq(struct ib_qp *ibqp) { struct c4iw_qp *qp = to_c4iw_qp(ibqp); + unsigned long flag; + bool need_to_wait; + + spin_lock_irqsave(&qp->lock, flag); + need_to_wait = !t4_sq_empty(&qp->wq); + spin_unlock_irqrestore(&qp->lock, flag); - wait_for_completion(&qp->sq_drained); + if (need_to_wait) + wait_for_completion(&qp->sq_drained); } void c4iw_drain_rq(struct ib_qp *ibqp) { struct c4iw_qp *qp = to_c4iw_qp(ibqp); + unsigned long flag; + bool need_to_wait; + + spin_lock_irqsave(&qp->lock, flag); + need_to_wait = !t4_rq_empty(&qp->wq); + spin_unlock_irqrestore(&qp->lock, flag); - wait_for_completion(&qp->rq_drained); + if (need_to_wait) + wait_for_completion(&qp->rq_drained); } -- cgit v0.10.2 From 32cc92c7b5e52357a0a24010bae9eb257fa75d3e Mon Sep 17 00:00:00 2001 From: Hariprasad S Date: Tue, 5 Apr 2016 10:23:48 +0530 Subject: RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[] [] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [] ? process_db_full+0x0/0xa0 [cxgb4] <4> [] process_db_full+0x46/0xa0 [cxgb4] <4> [] worker_thread+0x170/0x2a0 <4> [] ? autoremove_wake_function+0x0/0x40 <4> [] ? worker_thread+0x0/0x2a0 <4> [] kthread+0x9e/0xc0 <4> [] child_rip+0xa/0x20 <4> [] ? kthread+0x0/0xc0 <4> [] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri Fixes: 74217d4c6a4fb0d8 ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index b4eeb78..b0b9557 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -162,7 +162,7 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq, cq->bar2_va = c4iw_bar2_addrs(rdev, cq->cqid, T4_BAR2_QTYPE_INGRESS, &cq->bar2_qid, user ? &cq->bar2_pa : NULL); - if (user && !cq->bar2_va) { + if (user && !cq->bar2_pa) { pr_warn(MOD "%s: cqid %u not in BAR2 range.\n", pci_name(rdev->lldi.pdev), cq->cqid); ret = -EINVAL; diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 8aa2e52..e8993e4 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -185,6 +185,10 @@ void __iomem *c4iw_bar2_addrs(struct c4iw_rdev *rdev, unsigned int qid, if (pbar2_pa) *pbar2_pa = (rdev->bar2_pa + bar2_qoffset) & PAGE_MASK; + + if (is_t4(rdev->lldi.adapter_type)) + return NULL; + return rdev->bar2_kva + bar2_qoffset; } @@ -270,7 +274,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq, /* * User mode must have bar2 access. */ - if (user && (!wq->sq.bar2_va || !wq->rq.bar2_va)) { + if (user && (!wq->sq.bar2_pa || !wq->rq.bar2_pa)) { pr_warn(MOD "%s: sqid %u or rqid %u not in BAR2 range.\n", pci_name(rdev->lldi.pdev), wq->sq.qid, wq->rq.qid); goto free_dma; -- cgit v0.10.2 From e16d8a6cbb499c5c8bfe9330d3351b649bded4af Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 26 Apr 2016 08:52:44 -0700 Subject: Revert "x86/mm/32: Set NX in __supported_pte_mask before enabling paging" This reverts commit 320d25b6a05f8b73c23fc21025d2906ecdd2d4fc. This change was problematic for a couple of reasons: 1. It missed a some entry points (Xen things and 64-bit native). 2. The entry it changed can be executed more than once. This isn't really a problem, but it conflated per-cpu state setup and global state setup. 3. It broke 64-bit non-NX. 64-bit non-NX worked the other way around from 32-bit -- __supported_pte_mask had NX set initially and was *cleared* in x86_configure_nx. With the patch applied, it never got cleared. Reported-and-tested-by: Meelis Roos Signed-off-by: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/59bd15f7f4b56b633a611b7f70876c6d2ad01a98.1461685884.git.luto@kernel.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 54cdbd2..af11129 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -389,12 +389,6 @@ default_entry: /* Make changes effective */ wrmsr - /* - * And make sure that all the mappings we set up have NX set from - * the beginning. - */ - orl $(1 << (_PAGE_BIT_NX - 32)), pa(__supported_pte_mask + 4) - enable_paging: /* diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c index 8bea847..f65a33f 100644 --- a/arch/x86/mm/setup_nx.c +++ b/arch/x86/mm/setup_nx.c @@ -32,8 +32,9 @@ early_param("noexec", noexec_setup); void x86_configure_nx(void) { - /* If disable_nx is set, clear NX on all new mappings going forward. */ - if (disable_nx) + if (boot_cpu_has(X86_FEATURE_NX) && !disable_nx) + __supported_pte_mask |= _PAGE_NX; + else __supported_pte_mask &= ~_PAGE_NX; } -- cgit v0.10.2 From 8358b02bf67d3a5d8a825070e1aa73f25fb2e4c7 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Tue, 26 Apr 2016 22:26:26 +0200 Subject: bpf: fix double-fdput in replace_map_fd_with_map_ptr() When bpf(BPF_PROG_LOAD, ...) was invoked with a BPF program whose bytecode references a non-map file descriptor as a map file descriptor, the error handling code called fdput() twice instead of once (in __bpf_map_get() and in replace_map_fd_with_map_ptr()). If the file descriptor table of the current task is shared, this causes f_count to be decremented too much, allowing the struct file to be freed while it is still in use (use-after-free). This can be exploited to gain root privileges by an unprivileged user. This bug was introduced in commit 0246e64d9a5f ("bpf: handle pseudo BPF_LD_IMM64 insn"), but is only exploitable since commit 1be7f75d1668 ("bpf: enable non-root eBPF programs") because previously, CAP_SYS_ADMIN was required to reach the vulnerable code. (posted publicly according to request by maintainer) Signed-off-by: Jann Horn Signed-off-by: Linus Torvalds Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 618ef77..db2574e 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -2030,7 +2030,6 @@ static int replace_map_fd_with_map_ptr(struct verifier_env *env) if (IS_ERR(map)) { verbose("fd %d is not pointing to valid bpf_map\n", insn->imm); - fdput(f); return PTR_ERR(map); } -- cgit v0.10.2 From 8ead9dd54716d1e05e129959f702fcc1786f82b4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 25 Apr 2016 20:04:08 -0700 Subject: devpts: more pty driver interface cleanups This is more prep-work for the upcoming pty changes. Still just code cleanup with no actual semantic changes. This removes a bunch pointless complexity by just having the slave pty side remember the dentry associated with the devpts slave rather than the inode. That allows us to remove all the "look up the dentry" code for when we want to remove it again. Together with moving the tty pointer from "inode->i_private" to "dentry->d_fsdata" and getting rid of pointless inode locking, this removes about 30 lines of code. Not only is the end result smaller, it's simpler and easier to understand. The old code, for example, depended on the d_find_alias() to not just find the dentry, but also to check that it is still hashed, which in turn validated the tty pointer in the inode. That is a _very_ roundabout way to say "invalidate the cached tty pointer when the dentry is removed". The new code just does dentry->d_fsdata = NULL; in devpts_pty_kill() instead, invalidating the tty pointer rather more directly and obviously. Don't do something complex and subtle when the obvious straightforward approach will do. The rest of the patch (ie apart from code deletion and the above tty pointer clearing) is just switching the calling convention to pass the dentry or file pointer around instead of the inode. Cc: Eric Biederman Cc: Peter Anvin Cc: Andy Lutomirski Cc: Al Viro Cc: Peter Hurley Cc: Serge Hallyn Cc: Willy Tarreau Cc: Aurelien Jarno Cc: Alan Cox Cc: Jann Horn Cc: Greg KH Cc: Jiri Slaby Cc: Florian Weimer Signed-off-by: Linus Torvalds diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 0058d9fb..cf0dc51 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -626,7 +626,7 @@ static int pty_unix98_ioctl(struct tty_struct *tty, */ static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, - struct inode *ptm_inode, int idx) + struct file *file, int idx) { /* Master must be open via /dev/ptmx */ return ERR_PTR(-EIO); @@ -642,12 +642,12 @@ static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, */ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, - struct inode *pts_inode, int idx) + struct file *file, int idx) { struct tty_struct *tty; mutex_lock(&devpts_mutex); - tty = devpts_get_priv(pts_inode); + tty = devpts_get_priv(file->f_path.dentry); mutex_unlock(&devpts_mutex); /* Master must be open before slave */ if (!tty) @@ -722,7 +722,7 @@ static int ptmx_open(struct inode *inode, struct file *filp) { struct pts_fs_info *fsi; struct tty_struct *tty; - struct inode *slave_inode; + struct dentry *dentry; int retval; int index; @@ -769,14 +769,12 @@ static int ptmx_open(struct inode *inode, struct file *filp) tty_add_file(tty, filp); - slave_inode = devpts_pty_new(fsi, - MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index, - tty->link); - if (IS_ERR(slave_inode)) { - retval = PTR_ERR(slave_inode); + dentry = devpts_pty_new(fsi, index, tty->link); + if (IS_ERR(dentry)) { + retval = PTR_ERR(dentry); goto err_release; } - tty->link->driver_data = slave_inode; + tty->link->driver_data = dentry; retval = ptm_driver->ops->open(tty, filp); if (retval) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 9b04d72..24d5491 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1367,12 +1367,12 @@ static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p) * Locking: tty_mutex must be held. If the tty is found, bump the tty kref. */ static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, - struct inode *inode, int idx) + struct file *file, int idx) { struct tty_struct *tty; if (driver->ops->lookup) - tty = driver->ops->lookup(driver, inode, idx); + tty = driver->ops->lookup(driver, file, idx); else tty = driver->ttys[idx]; @@ -2040,7 +2040,7 @@ static struct tty_struct *tty_open_by_driver(dev_t device, struct inode *inode, } /* check whether we're reopening an existing tty */ - tty = tty_driver_lookup_tty(driver, inode, index); + tty = tty_driver_lookup_tty(driver, filp, index); if (IS_ERR(tty)) { mutex_unlock(&tty_mutex); goto out; diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index 0af8e7d..0b2954d 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -604,8 +604,7 @@ void devpts_put_ref(struct pts_fs_info *fsi) * * The created inode is returned. Remove it from /dev/pts/ by devpts_pty_kill. */ -struct inode *devpts_pty_new(struct pts_fs_info *fsi, dev_t device, int index, - void *priv) +struct dentry *devpts_pty_new(struct pts_fs_info *fsi, int index, void *priv) { struct dentry *dentry; struct super_block *sb; @@ -629,25 +628,21 @@ struct inode *devpts_pty_new(struct pts_fs_info *fsi, dev_t device, int index, inode->i_uid = opts->setuid ? opts->uid : current_fsuid(); inode->i_gid = opts->setgid ? opts->gid : current_fsgid(); inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; - init_special_inode(inode, S_IFCHR|opts->mode, device); - inode->i_private = priv; + init_special_inode(inode, S_IFCHR|opts->mode, MKDEV(UNIX98_PTY_SLAVE_MAJOR, index)); sprintf(s, "%d", index); - inode_lock(d_inode(root)); - dentry = d_alloc_name(root, s); if (dentry) { + dentry->d_fsdata = priv; d_add(dentry, inode); fsnotify_create(d_inode(root), dentry); } else { iput(inode); - inode = ERR_PTR(-ENOMEM); + dentry = ERR_PTR(-ENOMEM); } - inode_unlock(d_inode(root)); - - return inode; + return dentry; } /** @@ -656,24 +651,10 @@ struct inode *devpts_pty_new(struct pts_fs_info *fsi, dev_t device, int index, * * Returns whatever was passed as priv in devpts_pty_new for a given inode. */ -void *devpts_get_priv(struct inode *pts_inode) +void *devpts_get_priv(struct dentry *dentry) { - struct dentry *dentry; - void *priv = NULL; - - BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR)); - - /* Ensure dentry has not been deleted by devpts_pty_kill() */ - dentry = d_find_alias(pts_inode); - if (!dentry) - return NULL; - - if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC) - priv = pts_inode->i_private; - - dput(dentry); - - return priv; + WARN_ON_ONCE(dentry->d_sb->s_magic != DEVPTS_SUPER_MAGIC); + return dentry->d_fsdata; } /** @@ -682,24 +663,14 @@ void *devpts_get_priv(struct inode *pts_inode) * * This is an inverse operation of devpts_pty_new. */ -void devpts_pty_kill(struct inode *inode) +void devpts_pty_kill(struct dentry *dentry) { - struct super_block *sb = pts_sb_from_inode(inode); - struct dentry *root = sb->s_root; - struct dentry *dentry; + WARN_ON_ONCE(dentry->d_sb->s_magic != DEVPTS_SUPER_MAGIC); - BUG_ON(inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR)); - - inode_lock(d_inode(root)); - - dentry = d_find_alias(inode); - - drop_nlink(inode); + dentry->d_fsdata = NULL; + drop_nlink(dentry->d_inode); d_delete(dentry); dput(dentry); /* d_alloc_name() in devpts_pty_new() */ - dput(dentry); /* d_find_alias above */ - - inode_unlock(d_inode(root)); } static int __init init_devpts_fs(void) diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h index 358a4db..5871f29 100644 --- a/include/linux/devpts_fs.h +++ b/include/linux/devpts_fs.h @@ -27,11 +27,11 @@ int devpts_new_index(struct pts_fs_info *); void devpts_kill_index(struct pts_fs_info *, int); /* mknod in devpts */ -struct inode *devpts_pty_new(struct pts_fs_info *, dev_t, int, void *); +struct dentry *devpts_pty_new(struct pts_fs_info *, int, void *); /* get private structure */ -void *devpts_get_priv(struct inode *pts_inode); +void *devpts_get_priv(struct dentry *); /* unlink */ -void devpts_pty_kill(struct inode *inode); +void devpts_pty_kill(struct dentry *); #endif diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 1610524..b742b5e 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -7,7 +7,7 @@ * defined; unless noted otherwise, they are optional, and can be * filled in with a null pointer. * - * struct tty_struct * (*lookup)(struct tty_driver *self, int idx) + * struct tty_struct * (*lookup)(struct tty_driver *self, struct file *, int idx) * * Return the tty device corresponding to idx, NULL if there is not * one currently in use and an ERR_PTR value on error. Called under @@ -250,7 +250,7 @@ struct serial_icounter_struct; struct tty_operations { struct tty_struct * (*lookup)(struct tty_driver *driver, - struct inode *inode, int idx); + struct file *filp, int idx); int (*install)(struct tty_driver *driver, struct tty_struct *tty); void (*remove)(struct tty_driver *driver, struct tty_struct *tty); int (*open)(struct tty_struct * tty, struct file * filp); -- cgit v0.10.2 From 263efde31f97c498e1ebad30e4d2906609d7ad6b Mon Sep 17 00:00:00 2001 From: "cpaul@redhat.com" Date: Fri, 22 Apr 2016 16:08:46 -0400 Subject: drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1() We can thank KASAN for finding this, otherwise I probably would have spent hours on it. This fixes a somewhat harder to trigger kernel panic, occuring while enabling MST where the port we were currently updating the payload on would have all of it's refs dropped before we finished what we were doing: ================================================================== BUG: KASAN: use-after-free in drm_dp_update_payload_part1+0xb3f/0xdb0 [drm_kms_helper] at addr ffff8800d29de018 Read of size 4 by task Xorg/973 ============================================================================= BUG kmalloc-2048 (Tainted: G B W ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] age=16477 cpu=0 pid=2175 ___slab_alloc+0x472/0x490 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x151/0x190 drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] drm_dp_send_link_address+0x526/0x960 [drm_kms_helper] drm_dp_check_and_send_link_address+0x1ac/0x210 [drm_kms_helper] drm_dp_mst_link_probe_work+0x77/0xd0 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 INFO: Freed in drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] age=7521 cpu=0 pid=2175 __slab_free+0x17f/0x2d0 kfree+0x169/0x180 drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] drm_dp_destroy_connector_work+0x2b8/0x490 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 which on this T460s, would eventually lead to kernel panics in somewhat random places later in intel_mst_enable_dp() if we got lucky enough. Signed-off-by: Lyude Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index e17fbda..935d8cc 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -1796,6 +1796,11 @@ int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr) req_payload.start_slot = cur_slots; if (mgr->proposed_vcpis[i]) { port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi); + port = drm_dp_get_validated_port_ref(mgr, port); + if (!port) { + mutex_unlock(&mgr->payload_lock); + return -EINVAL; + } req_payload.num_slots = mgr->proposed_vcpis[i]->num_slots; req_payload.vcpi = mgr->proposed_vcpis[i]->vcpi; } else { @@ -1823,6 +1828,9 @@ int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr) mgr->payloads[i].payload_state = req_payload.payload_state; } cur_slots += req_payload.num_slots; + + if (port) + drm_dp_put_port(port); } for (i = 0; i < mgr->max_payloads; i++) { -- cgit v0.10.2 From 9dc0487d96a0396367a1451b31873482080b527f Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 13 Apr 2016 16:50:18 -0400 Subject: drm/dp/mst: Restore primary hub guid on resume Some hubs are forgetful, and end up forgetting whatever GUID we set previously after we do a suspend/resume cycle. This can lead to hotplugging breaking (along with probably other things) since the hub will start sending connection notifications with the wrong GUID. As such, we need to check on resume whether or not the GUID the hub is giving us is valid. Signed-off-by: Lyude Reviewed-by: Harry Wentland Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1460580618-7421-1-git-send-email-cpaul@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 935d8cc..71ea052 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -2136,6 +2136,8 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr) if (mgr->mst_primary) { int sret; + u8 guid[16]; + sret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd, DP_RECEIVER_CAP_SIZE); if (sret != DP_RECEIVER_CAP_SIZE) { DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n"); @@ -2150,6 +2152,16 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr) ret = -1; goto out_unlock; } + + /* Some hubs forget their guids after they resume */ + sret = drm_dp_dpcd_read(mgr->aux, DP_GUID, guid, 16); + if (sret != 16) { + DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n"); + ret = -1; + goto out_unlock; + } + drm_dp_check_mstb_guid(mgr->mst_primary, guid); + ret = 0; } else ret = -1; -- cgit v0.10.2 From 9a11d2e7e66b6b8764a2430686b8716637bf812e Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 14 Apr 2016 10:58:54 -0700 Subject: drm/virtio: send vblank event after crtc updates virtio_gpu was failing to send vblank events when using the atomic IOCTL with the DRM_MODE_PAGE_FLIP_EVENT flag set. This patch fixes each and enables atomic pageflips updates. Signed-off-by: Gustavo Padovan Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c index 4854dac..5fd1fd0 100644 --- a/drivers/gpu/drm/virtio/virtgpu_display.c +++ b/drivers/gpu/drm/virtio/virtgpu_display.c @@ -267,11 +267,23 @@ static int virtio_gpu_crtc_atomic_check(struct drm_crtc *crtc, return 0; } +static void virtio_gpu_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_crtc_state *old_state) +{ + unsigned long flags; + + spin_lock_irqsave(&crtc->dev->event_lock, flags); + if (crtc->state->event) + drm_crtc_send_vblank_event(crtc, crtc->state->event); + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); +} + static const struct drm_crtc_helper_funcs virtio_gpu_crtc_helper_funcs = { .enable = virtio_gpu_crtc_enable, .disable = virtio_gpu_crtc_disable, .mode_set_nofb = virtio_gpu_crtc_mode_set_nofb, .atomic_check = virtio_gpu_crtc_atomic_check, + .atomic_flush = virtio_gpu_crtc_atomic_flush, }; static void virtio_gpu_enc_mode_set(struct drm_encoder *encoder, -- cgit v0.10.2 From d6776bba44d9752f6cdf640046070e71ee4bba7b Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 22 Apr 2016 14:57:48 +1000 Subject: cxl: Keep IRQ mappings on context teardown Keep IRQ mappings on context teardown. This won't leak IRQs as if we allocate the mapping again, the generic code will give the same mapping used last time. Doing this works around a race in the generic code. Masking the interrupt introduces a race which can crash the kernel or result in IRQ that is never EOIed. The lost of EOI results in all subsequent mappings to the same HW IRQ never receiving an interrupt. We've seen this race with cxl test cases which are doing heavy context startup and teardown at the same time as heavy interrupt load. A fix to the generic code is being investigated also. Signed-off-by: Michael Neuling Cc: stable@vger.kernel.org # 3.8 Tested-by: Andrew Donnellan Acked-by: Ian Munsie Tested-by: Vaibhav Jain Signed-off-by: Michael Ellerman diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c index be646dc..8def455 100644 --- a/drivers/misc/cxl/irq.c +++ b/drivers/misc/cxl/irq.c @@ -203,7 +203,6 @@ unsigned int cxl_map_irq(struct cxl *adapter, irq_hw_number_t hwirq, void cxl_unmap_irq(unsigned int virq, void *cookie) { free_irq(virq, cookie); - irq_dispose_mapping(virq); } int cxl_register_one_irq(struct cxl *adapter, -- cgit v0.10.2 From 2bc79ffcbb817873cc43d63118008ab75181b73d Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 22 Apr 2016 14:57:49 +1000 Subject: cxl: Poll for outstanding IRQs when detaching a context When detaching contexts, we may still have interrupts in the system which are yet to be delivered to any CPU and be acked in the PSL. This can result in a subsequent unrelated process getting an spurious IRQ or an interrupt for a non-existent context. This polls the PSL to ensure that the PSL is clear of IRQs for the detached context, before removing the context from the idr. Signed-off-by: Michael Neuling Tested-by: Andrew Donnellan Acked-by: Ian Munsie Tested-by: Vaibhav Jain Signed-off-by: Michael Ellerman diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c index 10370f2..7edea9c 100644 --- a/drivers/misc/cxl/context.c +++ b/drivers/misc/cxl/context.c @@ -223,6 +223,13 @@ int __detach_context(struct cxl_context *ctx) cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)); flush_work(&ctx->fault_work); /* Only needed for dedicated process */ + /* + * Wait until no further interrupts are presented by the PSL + * for this context. + */ + if (cxl_ops->irq_wait) + cxl_ops->irq_wait(ctx); + /* release the reference to the group leader and mm handling pid */ put_pid(ctx->pid); put_pid(ctx->glpid); diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h index 38e21cf..73dc2a3 100644 --- a/drivers/misc/cxl/cxl.h +++ b/drivers/misc/cxl/cxl.h @@ -274,6 +274,7 @@ static const cxl_p2n_reg_t CXL_PSL_WED_An = {0x0A0}; #define CXL_PSL_DSISR_An_PE (1ull << (63-4)) /* PSL Error (implementation specific) */ #define CXL_PSL_DSISR_An_AE (1ull << (63-5)) /* AFU Error */ #define CXL_PSL_DSISR_An_OC (1ull << (63-6)) /* OS Context Warning */ +#define CXL_PSL_DSISR_PENDING (CXL_PSL_DSISR_TRANS | CXL_PSL_DSISR_An_PE | CXL_PSL_DSISR_An_AE | CXL_PSL_DSISR_An_OC) /* NOTE: Bits 32:63 are undefined if DSISR[DS] = 1 */ #define CXL_PSL_DSISR_An_M DSISR_NOHPTE /* PTE not found */ #define CXL_PSL_DSISR_An_P DSISR_PROTFAULT /* Storage protection violation */ @@ -855,6 +856,7 @@ struct cxl_backend_ops { u64 dsisr, u64 errstat); irqreturn_t (*psl_interrupt)(int irq, void *data); int (*ack_irq)(struct cxl_context *ctx, u64 tfc, u64 psl_reset_mask); + void (*irq_wait)(struct cxl_context *ctx); int (*attach_process)(struct cxl_context *ctx, bool kernel, u64 wed, u64 amr); int (*detach_process)(struct cxl_context *ctx); diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c index 387fcbd..ecf7557 100644 --- a/drivers/misc/cxl/native.c +++ b/drivers/misc/cxl/native.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -797,6 +798,35 @@ static irqreturn_t native_irq_multiplexed(int irq, void *data) return fail_psl_irq(afu, &irq_info); } +void native_irq_wait(struct cxl_context *ctx) +{ + u64 dsisr; + int timeout = 1000; + int ph; + + /* + * Wait until no further interrupts are presented by the PSL + * for this context. + */ + while (timeout--) { + ph = cxl_p2n_read(ctx->afu, CXL_PSL_PEHandle_An) & 0xffff; + if (ph != ctx->pe) + return; + dsisr = cxl_p2n_read(ctx->afu, CXL_PSL_DSISR_An); + if ((dsisr & CXL_PSL_DSISR_PENDING) == 0) + return; + /* + * We are waiting for the workqueue to process our + * irq, so need to let that run here. + */ + msleep(1); + } + + dev_warn(&ctx->afu->dev, "WARNING: waiting on DSI for PE %i" + " DSISR %016llx!\n", ph, dsisr); + return; +} + static irqreturn_t native_slice_irq_err(int irq, void *data) { struct cxl_afu *afu = data; @@ -1076,6 +1106,7 @@ const struct cxl_backend_ops cxl_native_ops = { .handle_psl_slice_error = native_handle_psl_slice_error, .psl_interrupt = NULL, .ack_irq = native_ack_irq, + .irq_wait = native_irq_wait, .attach_process = native_attach_process, .detach_process = native_detach_process, .support_attributes = native_support_attributes, -- cgit v0.10.2 From d701cca6744fe0d67c86346dcfc9b128b17b5045 Mon Sep 17 00:00:00 2001 From: Rui Salvaterra Date: Tue, 19 Apr 2016 13:23:36 +0100 Subject: powerpc: wire up preadv2 and pwritev2 syscalls Wire up preadv2/pwritev2 in the same way as preadv/pwritev. Fixes two build warnings on ppc64. mpe: Lightly tested with fio (slightly hacked to add the syscall wrappers): fio-4217 [009] .... 1304.635300: sys_preadv2(fd: 3, vec: 10025821de0, vlen: 1, pos_l: 6253000, pos_h: 0, flags: 1) fio-4217 [009] .... 1304.635474: sys_preadv2 -> 0x1000 Signed-off-by: Rui Salvaterra Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 3fa9df7..2fc5d4d 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -384,3 +384,5 @@ SYSCALL(ni_syscall) SYSCALL(ni_syscall) SYSCALL(mlock2) SYSCALL(copy_file_range) +COMPAT_SYS_SPU(preadv2) +COMPAT_SYS_SPU(pwritev2) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 1f2594d..cf12c58 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -12,7 +12,7 @@ #include -#define NR_syscalls 380 +#define NR_syscalls 382 #define __NR__exit __NR_exit diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index 940290d..e9f5f41 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -390,5 +390,7 @@ #define __NR_membarrier 365 #define __NR_mlock2 378 #define __NR_copy_file_range 379 +#define __NR_preadv2 380 +#define __NR_pwritev2 381 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ -- cgit v0.10.2 From 532c34b5fbf1687df63b3fcd5b2846312ac943c6 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 25 Apr 2016 17:54:28 +0200 Subject: s390/sclp_ctl: fix potential information leak with /dev/sclp The sclp_ctl_ioctl_sccb function uses two copy_from_user calls to retrieve the sclp request from user space. The first copy_from_user fetches the length of the request which is stored in the first two bytes of the request. The second copy_from_user gets the complete sclp request, but this copies the length field a second time. A malicious user may have changed the length in the meantime. Reported-by: Pengfei Wang Reviewed-by: Michael Holzheu Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_ctl.c b/drivers/s390/char/sclp_ctl.c index 648cb86..ea607a4 100644 --- a/drivers/s390/char/sclp_ctl.c +++ b/drivers/s390/char/sclp_ctl.c @@ -56,6 +56,7 @@ static int sclp_ctl_ioctl_sccb(void __user *user_area) { struct sclp_ctl_sccb ctl_sccb; struct sccb_header *sccb; + unsigned long copied; int rc; if (copy_from_user(&ctl_sccb, user_area, sizeof(ctl_sccb))) @@ -65,14 +66,15 @@ static int sclp_ctl_ioctl_sccb(void __user *user_area) sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!sccb) return -ENOMEM; - if (copy_from_user(sccb, u64_to_uptr(ctl_sccb.sccb), sizeof(*sccb))) { + copied = PAGE_SIZE - + copy_from_user(sccb, u64_to_uptr(ctl_sccb.sccb), PAGE_SIZE); + if (offsetof(struct sccb_header, length) + + sizeof(sccb->length) > copied || sccb->length > copied) { rc = -EFAULT; goto out_free; } - if (sccb->length > PAGE_SIZE || sccb->length < 8) - return -EINVAL; - if (copy_from_user(sccb, u64_to_uptr(ctl_sccb.sccb), sccb->length)) { - rc = -EFAULT; + if (sccb->length < 8) { + rc = -EINVAL; goto out_free; } rc = sclp_sync_request(ctl_sccb.cmdw, sccb); -- cgit v0.10.2 From a8950e49bd241dc9ad90c24e92e23e95dbe9f018 Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Tue, 19 Apr 2016 18:17:32 +0800 Subject: nios2: memset: use the right constraint modifier for the %4 output operand Depending on the size of the area to be memset'ed, the nios2 memset implementation either uses a naive loop (for buffers smaller or equal than 8 bytes) or a more optimized implementation (for buffers larger than 8 bytes). This implementation does 4-byte stores rather than 1-byte stores to speed up memset. However, we discovered that on our nios2 platform, memset() was not properly setting the buffer to the expected value. A memset of 0xff would not set the entire buffer to 0xff, but to: 0xff 0x00 0xff 0x00 0xff 0x00 0xff 0x00 ... Which is obviously incorrect. Our investigation has revealed that the problem lies in the incorrect constraints used in the inline assembly. The following piece of assembly, from the nios2 memset implementation, is supposed to create a 4-byte value that repeats 4 times the 1-byte pattern passed as memset argument: /* fill8 %3, %5 (c & 0xff) */ " slli %4, %5, 8\n" " or %4, %4, %5\n" " slli %3, %4, 16\n" " or %3, %3, %4\n" However, depending on the compiler and optimization level, this code might be compiled as: 34: 280a923a slli r5,r5,8 38: 294ab03a or r5,r5,r5 3c: 2808943a slli r4,r5,16 40: 2148b03a or r4,r4,r5 This is wrong because r5 gets used both for %5 and %4, which leads to the final pattern stored in r4 to be 0xff00ff00 rather than the expected 0xffffffff. %4 is defined with the "=r" constraint, i.e as an output operand. However, as explained in http://www.ethernut.de/en/documents/arm-inline-asm.html, this does not prevent gcc from using the same register for an output operand (%4) and input operand (%5). By using the constraint modifier '&', we indicate that the register should be used for output only. With this change, we get the following assembly output: 34: 2810923a slli r8,r5,8 38: 4150b03a or r8,r8,r5 3c: 400e943a slli r7,r8,16 40: 3a0eb03a or r7,r7,r8 Which correctly produces the 0xffffffff pattern when 0xff is passed as the memset() pattern. It is worth mentioning the observed consequence of this bug: we were hitting the kernel BUG() in mm/bootmem.c:__free() that verifies when marking a page as free that it was previously marked as occupied (i.e that the bit was set to 1). The entire bootmem bitmap is set to 0xff bit via a memset() during the bootmem initialization. The bootmem_free() call right after the initialization was finding some bits to be set to 0, which didn't make sense since the bitmap has just been memset'ed to 0xff. Except that due to the bug explained above, the bitmap was in fact initialized to 0xff00ff00. Thanks to Marek Vasut for his help and feedback. Signed-off-by: Romain Perier Acked-by: Marek Vasut Acked-by: Ley Foon Tan diff --git a/arch/nios2/lib/memset.c b/arch/nios2/lib/memset.c index c2cfcb1..2fcefe7 100644 --- a/arch/nios2/lib/memset.c +++ b/arch/nios2/lib/memset.c @@ -68,7 +68,7 @@ void *memset(void *s, int c, size_t count) "=r" (charcnt), /* %1 Output */ "=r" (dwordcnt), /* %2 Output */ "=r" (fill8reg), /* %3 Output */ - "=r" (wrkrega) /* %4 Output */ + "=&r" (wrkrega) /* %4 Output only */ : "r" (c), /* %5 Input */ "0" (s), /* %0 Input/Output */ "1" (count) /* %1 Input/Output */ -- cgit v0.10.2 From 32ed9a0e0ddcf58ef343bcb6ae44ee60d1ee31ce Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Tue, 26 Apr 2016 19:29:33 +0300 Subject: ARC: support generic per-device coherent dma mem Signed-off-by: Alexey Brodkin Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 12d0284..28d47f8 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -37,6 +37,7 @@ config ARC select OF_EARLY_FLATTREE select PERF_USE_VMALLOC select HAVE_DEBUG_STACKOVERFLOW + select HAVE_GENERIC_DMA_COHERENT config MIGHT_HAVE_PCI bool -- cgit v0.10.2 From 1b10cb21d888c021bedbe678f7c26aee1bf04ffa Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Tue, 26 Apr 2016 19:29:34 +0300 Subject: ARC: add support for reserved memory defined by device tree Enable reserved memory initialization from device tree. Signed-off-by: Alexey Brodkin Cc: Grant Likely Cc: Marek Szyprowski Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 28d47f8..ec4791e 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -35,6 +35,7 @@ config ARC select NO_BOOTMEM select OF select OF_EARLY_FLATTREE + select OF_RESERVED_MEM select PERF_USE_VMALLOC select HAVE_DEBUG_STACKOVERFLOW select HAVE_GENERIC_DMA_COHERENT diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 7d2c4fb..5487d0b 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -13,6 +13,7 @@ #ifdef CONFIG_BLK_DEV_INITRD #include #endif +#include #include #include #include @@ -136,6 +137,9 @@ void __init setup_arch_memory(void) memblock_reserve(__pa(initrd_start), initrd_end - initrd_start); #endif + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); + memblock_dump_all(); /*----------------- node/zones setup --------------------------*/ -- cgit v0.10.2 From 56fc350224f16901db709cd8cba86bac751aa2a2 Mon Sep 17 00:00:00 2001 From: Flora Cui Date: Wed, 20 Apr 2016 10:23:47 +0800 Subject: drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following scenario: 1. Page table bo allocated in vram and linked to man->lru. tbo->list_kref.refcount=2 2. Page table bo is swapped out and removed from man->lru. tbo->list_kref.refcount=1 3. Command submission from userspace. Page table bo is moved to vram. ttm_bo_move_to_lru_tail() link it to man->lru and don't increase the kref count. Reviewed-by: Thomas Hellstrom Signed-off-by: Flora Cui Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 4cbf265..e3daafa 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -230,22 +230,13 @@ EXPORT_SYMBOL(ttm_bo_del_sub_from_lru); void ttm_bo_move_to_lru_tail(struct ttm_buffer_object *bo) { - struct ttm_bo_device *bdev = bo->bdev; - struct ttm_mem_type_manager *man; + int put_count = 0; lockdep_assert_held(&bo->resv->lock.base); - if (bo->mem.placement & TTM_PL_FLAG_NO_EVICT) { - list_del_init(&bo->swap); - list_del_init(&bo->lru); - - } else { - if (bo->ttm && !(bo->ttm->page_flags & TTM_PAGE_FLAG_SG)) - list_move_tail(&bo->swap, &bo->glob->swap_lru); - - man = &bdev->man[bo->mem.mem_type]; - list_move_tail(&bo->lru, &man->lru); - } + put_count = ttm_bo_del_from_lru(bo); + ttm_bo_list_ref_sub(bo, put_count, true); + ttm_bo_add_to_lru(bo); } EXPORT_SYMBOL(ttm_bo_move_to_lru_tail); -- cgit v0.10.2 From 5d5b7803c49bbb01bdf4c6e95e8314d0515b9484 Mon Sep 17 00:00:00 2001 From: Vitaly Prosyak Date: Thu, 14 Apr 2016 13:34:03 -0400 Subject: drm/radeon: fix vertical bars appear on monitor (v2) When crtc/timing is disabled on boot the dig block should be stopped in order ignore timing from crtc, reset the steering fifo otherwise we get display corruption or hung in dp sst mode. v2: agd: fix coding style Signed-off-by: Vitaly Prosyak Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 76c4bdf..34f7a29 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2608,10 +2608,152 @@ static void evergreen_agp_enable(struct radeon_device *rdev) WREG32(VM_CONTEXT1_CNTL, 0); } +static const unsigned ni_dig_offsets[] = +{ + NI_DIG0_REGISTER_OFFSET, + NI_DIG1_REGISTER_OFFSET, + NI_DIG2_REGISTER_OFFSET, + NI_DIG3_REGISTER_OFFSET, + NI_DIG4_REGISTER_OFFSET, + NI_DIG5_REGISTER_OFFSET +}; + +static const unsigned ni_tx_offsets[] = +{ + NI_DCIO_UNIPHY0_UNIPHY_TX_CONTROL1, + NI_DCIO_UNIPHY1_UNIPHY_TX_CONTROL1, + NI_DCIO_UNIPHY2_UNIPHY_TX_CONTROL1, + NI_DCIO_UNIPHY3_UNIPHY_TX_CONTROL1, + NI_DCIO_UNIPHY4_UNIPHY_TX_CONTROL1, + NI_DCIO_UNIPHY5_UNIPHY_TX_CONTROL1 +}; + +static const unsigned evergreen_dp_offsets[] = +{ + EVERGREEN_DP0_REGISTER_OFFSET, + EVERGREEN_DP1_REGISTER_OFFSET, + EVERGREEN_DP2_REGISTER_OFFSET, + EVERGREEN_DP3_REGISTER_OFFSET, + EVERGREEN_DP4_REGISTER_OFFSET, + EVERGREEN_DP5_REGISTER_OFFSET +}; + + +/* + * Assumption is that EVERGREEN_CRTC_MASTER_EN enable for requested crtc + * We go from crtc to connector and it is not relible since it + * should be an opposite direction .If crtc is enable then + * find the dig_fe which selects this crtc and insure that it enable. + * if such dig_fe is found then find dig_be which selects found dig_be and + * insure that it enable and in DP_SST mode. + * if UNIPHY_PLL_CONTROL1.enable then we should disconnect timing + * from dp symbols clocks . + */ +static bool evergreen_is_dp_sst_stream_enabled(struct radeon_device *rdev, + unsigned crtc_id, unsigned *ret_dig_fe) +{ + unsigned i; + unsigned dig_fe; + unsigned dig_be; + unsigned dig_en_be; + unsigned uniphy_pll; + unsigned digs_fe_selected; + unsigned dig_be_mode; + unsigned dig_fe_mask; + bool is_enabled = false; + bool found_crtc = false; + + /* loop through all running dig_fe to find selected crtc */ + for (i = 0; i < ARRAY_SIZE(ni_dig_offsets); i++) { + dig_fe = RREG32(NI_DIG_FE_CNTL + ni_dig_offsets[i]); + if (dig_fe & NI_DIG_FE_CNTL_SYMCLK_FE_ON && + crtc_id == NI_DIG_FE_CNTL_SOURCE_SELECT(dig_fe)) { + /* found running pipe */ + found_crtc = true; + dig_fe_mask = 1 << i; + dig_fe = i; + break; + } + } + + if (found_crtc) { + /* loop through all running dig_be to find selected dig_fe */ + for (i = 0; i < ARRAY_SIZE(ni_dig_offsets); i++) { + dig_be = RREG32(NI_DIG_BE_CNTL + ni_dig_offsets[i]); + /* if dig_fe_selected by dig_be? */ + digs_fe_selected = NI_DIG_BE_CNTL_FE_SOURCE_SELECT(dig_be); + dig_be_mode = NI_DIG_FE_CNTL_MODE(dig_be); + if (dig_fe_mask & digs_fe_selected && + /* if dig_be in sst mode? */ + dig_be_mode == NI_DIG_BE_DPSST) { + dig_en_be = RREG32(NI_DIG_BE_EN_CNTL + + ni_dig_offsets[i]); + uniphy_pll = RREG32(NI_DCIO_UNIPHY0_PLL_CONTROL1 + + ni_tx_offsets[i]); + /* dig_be enable and tx is running */ + if (dig_en_be & NI_DIG_BE_EN_CNTL_ENABLE && + dig_en_be & NI_DIG_BE_EN_CNTL_SYMBCLK_ON && + uniphy_pll & NI_DCIO_UNIPHY0_PLL_CONTROL1_ENABLE) { + is_enabled = true; + *ret_dig_fe = dig_fe; + break; + } + } + } + } + + return is_enabled; +} + +/* + * Blank dig when in dp sst mode + * Dig ignores crtc timing + */ +static void evergreen_blank_dp_output(struct radeon_device *rdev, + unsigned dig_fe) +{ + unsigned stream_ctrl; + unsigned fifo_ctrl; + unsigned counter = 0; + + if (dig_fe >= ARRAY_SIZE(evergreen_dp_offsets)) { + DRM_ERROR("invalid dig_fe %d\n", dig_fe); + return; + } + + stream_ctrl = RREG32(EVERGREEN_DP_VID_STREAM_CNTL + + evergreen_dp_offsets[dig_fe]); + if (!(stream_ctrl & EVERGREEN_DP_VID_STREAM_CNTL_ENABLE)) { + DRM_ERROR("dig %d , should be enable\n", dig_fe); + return; + } + + stream_ctrl &=~EVERGREEN_DP_VID_STREAM_CNTL_ENABLE; + WREG32(EVERGREEN_DP_VID_STREAM_CNTL + + evergreen_dp_offsets[dig_fe], stream_ctrl); + + stream_ctrl = RREG32(EVERGREEN_DP_VID_STREAM_CNTL + + evergreen_dp_offsets[dig_fe]); + while (counter < 32 && stream_ctrl & EVERGREEN_DP_VID_STREAM_STATUS) { + msleep(1); + counter++; + stream_ctrl = RREG32(EVERGREEN_DP_VID_STREAM_CNTL + + evergreen_dp_offsets[dig_fe]); + } + if (counter >= 32 ) + DRM_ERROR("counter exceeds %d\n", counter); + + fifo_ctrl = RREG32(EVERGREEN_DP_STEER_FIFO + evergreen_dp_offsets[dig_fe]); + fifo_ctrl |= EVERGREEN_DP_STEER_FIFO_RESET; + WREG32(EVERGREEN_DP_STEER_FIFO + evergreen_dp_offsets[dig_fe], fifo_ctrl); + +} + void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *save) { u32 crtc_enabled, tmp, frame_count, blackout; int i, j; + unsigned dig_fe; if (!ASIC_IS_NODCE(rdev)) { save->vga_render_control = RREG32(VGA_RENDER_CONTROL); @@ -2651,7 +2793,17 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav break; udelay(1); } - + /*we should disable dig if it drives dp sst*/ + /*but we are in radeon_device_init and the topology is unknown*/ + /*and it is available after radeon_modeset_init*/ + /*the following method radeon_atom_encoder_dpms_dig*/ + /*does the job if we initialize it properly*/ + /*for now we do it this manually*/ + /**/ + if (ASIC_IS_DCE5(rdev) && + evergreen_is_dp_sst_stream_enabled(rdev, i ,&dig_fe)) + evergreen_blank_dp_output(rdev, dig_fe); + /*we could remove 6 lines below*/ /* XXX this is a hack to avoid strange behavior with EFI on certain systems */ WREG32(EVERGREEN_CRTC_UPDATE_LOCK + crtc_offsets[i], 1); tmp = RREG32(EVERGREEN_CRTC_CONTROL + crtc_offsets[i]); diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h index aa939dfe..b436bad 100644 --- a/drivers/gpu/drm/radeon/evergreen_reg.h +++ b/drivers/gpu/drm/radeon/evergreen_reg.h @@ -250,8 +250,43 @@ /* HDMI blocks at 0x7030, 0x7c30, 0x10830, 0x11430, 0x12030, 0x12c30 */ #define EVERGREEN_HDMI_BASE 0x7030 +/*DIG block*/ +#define NI_DIG0_REGISTER_OFFSET (0x7000 - 0x7000) +#define NI_DIG1_REGISTER_OFFSET (0x7C00 - 0x7000) +#define NI_DIG2_REGISTER_OFFSET (0x10800 - 0x7000) +#define NI_DIG3_REGISTER_OFFSET (0x11400 - 0x7000) +#define NI_DIG4_REGISTER_OFFSET (0x12000 - 0x7000) +#define NI_DIG5_REGISTER_OFFSET (0x12C00 - 0x7000) + + +#define NI_DIG_FE_CNTL 0x7000 +# define NI_DIG_FE_CNTL_SOURCE_SELECT(x) ((x) & 0x3) +# define NI_DIG_FE_CNTL_SYMCLK_FE_ON (1<<24) + + +#define NI_DIG_BE_CNTL 0x7140 +# define NI_DIG_BE_CNTL_FE_SOURCE_SELECT(x) (((x) >> 8 ) & 0x3F) +# define NI_DIG_FE_CNTL_MODE(x) (((x) >> 16) & 0x7 ) + +#define NI_DIG_BE_EN_CNTL 0x7144 +# define NI_DIG_BE_EN_CNTL_ENABLE (1 << 0) +# define NI_DIG_BE_EN_CNTL_SYMBCLK_ON (1 << 8) +# define NI_DIG_BE_DPSST 0 /* Display Port block */ +#define EVERGREEN_DP0_REGISTER_OFFSET (0x730C - 0x730C) +#define EVERGREEN_DP1_REGISTER_OFFSET (0x7F0C - 0x730C) +#define EVERGREEN_DP2_REGISTER_OFFSET (0x10B0C - 0x730C) +#define EVERGREEN_DP3_REGISTER_OFFSET (0x1170C - 0x730C) +#define EVERGREEN_DP4_REGISTER_OFFSET (0x1230C - 0x730C) +#define EVERGREEN_DP5_REGISTER_OFFSET (0x12F0C - 0x730C) + + +#define EVERGREEN_DP_VID_STREAM_CNTL 0x730C +# define EVERGREEN_DP_VID_STREAM_CNTL_ENABLE (1 << 0) +# define EVERGREEN_DP_VID_STREAM_STATUS (1 <<16) +#define EVERGREEN_DP_STEER_FIFO 0x7310 +# define EVERGREEN_DP_STEER_FIFO_RESET (1 << 0) #define EVERGREEN_DP_SEC_CNTL 0x7280 # define EVERGREEN_DP_SEC_STREAM_ENABLE (1 << 0) # define EVERGREEN_DP_SEC_ASP_ENABLE (1 << 4) @@ -266,4 +301,15 @@ # define EVERGREEN_DP_SEC_N_BASE_MULTIPLE(x) (((x) & 0xf) << 24) # define EVERGREEN_DP_SEC_SS_EN (1 << 28) +/*DCIO_UNIPHY block*/ +#define NI_DCIO_UNIPHY0_UNIPHY_TX_CONTROL1 (0x6600 -0x6600) +#define NI_DCIO_UNIPHY1_UNIPHY_TX_CONTROL1 (0x6640 -0x6600) +#define NI_DCIO_UNIPHY2_UNIPHY_TX_CONTROL1 (0x6680 - 0x6600) +#define NI_DCIO_UNIPHY3_UNIPHY_TX_CONTROL1 (0x66C0 - 0x6600) +#define NI_DCIO_UNIPHY4_UNIPHY_TX_CONTROL1 (0x6700 - 0x6600) +#define NI_DCIO_UNIPHY5_UNIPHY_TX_CONTROL1 (0x6740 - 0x6600) + +#define NI_DCIO_UNIPHY0_PLL_CONTROL1 0x6618 +# define NI_DCIO_UNIPHY0_PLL_CONTROL1_ENABLE (1 << 0) + #endif -- cgit v0.10.2 From e9bef455af8eb0e837e179aab8988ae2649fd8d3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 25 Apr 2016 13:12:18 -0400 Subject: Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control" This reverts commit bedf2a65c1aa8fb29ba8527fd00c0f68ec1f55f1. See the radeon revert for an extended description. Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index 0020a0e..fa948dc 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -63,10 +63,6 @@ bool amdgpu_has_atpx(void) { return amdgpu_atpx_priv.atpx_detected; } -bool amdgpu_has_atpx_dgpu_power_cntl(void) { - return amdgpu_atpx_priv.atpx.functions.power_cntl; -} - /** * amdgpu_atpx_call - call an ATPX method * @@ -146,6 +142,10 @@ static void amdgpu_atpx_parse_functions(struct amdgpu_atpx_functions *f, u32 mas */ static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx) { + /* make sure required functions are enabled */ + /* dGPU power control is required */ + atpx->functions.power_cntl = true; + if (atpx->functions.px_params) { union acpi_object *info; struct atpx_px_params output; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 61211747..2139da7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -62,12 +62,6 @@ static const char *amdgpu_asic_name[] = { "LAST", }; -#if defined(CONFIG_VGA_SWITCHEROO) -bool amdgpu_has_atpx_dgpu_power_cntl(void); -#else -static inline bool amdgpu_has_atpx_dgpu_power_cntl(void) { return false; } -#endif - bool amdgpu_device_is_px(struct drm_device *dev) { struct amdgpu_device *adev = dev->dev_private; @@ -1485,7 +1479,7 @@ int amdgpu_device_init(struct amdgpu_device *adev, if (amdgpu_runtime_pm == 1) runtime = true; - if (amdgpu_device_is_px(ddev) && amdgpu_has_atpx_dgpu_power_cntl()) + if (amdgpu_device_is_px(ddev)) runtime = true; vga_switcheroo_register_client(adev->pdev, &amdgpu_switcheroo_ops, runtime); if (runtime) -- cgit v0.10.2 From c8791a13d28161a1fa1138112dfe1f986a1358cf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 25 Apr 2016 13:14:47 -0400 Subject: drm/amdgpu: print a message if ATPX dGPU power control is missing It will help identify problematic boards. Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index fa948dc..35a1248 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -144,7 +144,10 @@ static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx) { /* make sure required functions are enabled */ /* dGPU power control is required */ - atpx->functions.power_cntl = true; + if (atpx->functions.power_cntl == false) { + printk("ATPX dGPU power cntl not present, forcing\n"); + atpx->functions.power_cntl = true; + } if (atpx->functions.px_params) { union acpi_object *info; -- cgit v0.10.2 From afc4542105f2b5a3bc6f0f3530d7ccbc94ca90fb Mon Sep 17 00:00:00 2001 From: Flora Cui Date: Mon, 25 Apr 2016 16:06:17 +0800 Subject: drm/amdgpu: disable vm interrupts with vm_fault_stop=2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit V2: disable all vm interrupts in late_init() Signed-off-by: Flora Cui Reviewed-by: Ken Wang Reviewed-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c index 05b0353..a4a2e6c 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c @@ -910,7 +910,10 @@ static int gmc_v7_0_late_init(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0); + if (amdgpu_vm_fault_stop != AMDGPU_VM_FAULT_STOP_ALWAYS) + return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0); + else + return 0; } static int gmc_v7_0_sw_init(void *handle) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c index 02deb32..7a9db2c 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c @@ -870,7 +870,10 @@ static int gmc_v8_0_late_init(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0); + if (amdgpu_vm_fault_stop != AMDGPU_VM_FAULT_STOP_ALWAYS) + return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0); + else + return 0; } #define mmMC_SEQ_MISC0_FIJI 0xA71 -- cgit v0.10.2 From 5fdfc48bb0da2aa8a912024a6ecca06486eb9141 Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Tue, 29 Mar 2016 19:23:32 +0800 Subject: thermal: hisilicon: increase temperature resolution When calculate temperature, old code firstly do division and then convert to "millicelsius" unit. This will lose resolution and only can read back temperature with "Celsius" unit. So firstly scale step value to "millicelsius" and then do division, so finally we can increase resolution for temperature value. Also refine the calculation from temperature value to step value. Signed-off-by: Leo Yan Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 36d0729..5e820b5 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -68,12 +68,12 @@ static inline int _step_to_temp(int step) * Every step equals (1 * 200) / 255 celsius, and finally * need convert to millicelsius. */ - return (HISI_TEMP_BASE + (step * 200 / 255)) * 1000; + return (HISI_TEMP_BASE * 1000 + (step * 200000 / 255)); } static inline long _temp_to_step(long temp) { - return ((temp / 1000 - HISI_TEMP_BASE) * 255 / 200); + return ((temp - HISI_TEMP_BASE * 1000) * 255) / 200000; } static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data, -- cgit v0.10.2 From 15333e3af1de37b1b214b28c85fe9a7b257fb92c Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Tue, 29 Mar 2016 19:24:15 +0800 Subject: thermal: use %d to print S32 parameters Power allocator's parameters are S32 type, so use %d to print them. Acked-by: Javi Merino Signed-off-by: Leo Yan Signed-off-by: Eduardo Valentin diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index f1db496..5133cd1 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -959,7 +959,7 @@ static DEVICE_ATTR(sustainable_power, S_IWUSR | S_IRUGO, sustainable_power_show, struct thermal_zone_device *tz = to_thermal_zone(dev); \ \ if (tz->tzp) \ - return sprintf(buf, "%u\n", tz->tzp->name); \ + return sprintf(buf, "%d\n", tz->tzp->name); \ else \ return -EIO; \ } \ -- cgit v0.10.2 From 1bdb8970392a68489b469c3a330a1adb5ef61beb Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 27 Apr 2016 14:22:32 -0600 Subject: x86/apic: Handle zero vector gracefully in clear_vector_irq() If x86_vector_alloc_irq() fails x86_vector_free_irqs() is invoked to cleanup the already allocated vectors. This subsequently calls clear_vector_irq(). The failed irq has no vector assigned, which triggers the BUG_ON(!vector) in clear_vector_irq(). We cannot suppress the call to x86_vector_free_irqs() for the failed interrupt, because the other data related to this irq must be cleaned up as well. So calling clear_vector_irq() with vector == 0 is legitimate. Remove the BUG_ON and return if vector is zero, [ tglx: Massaged changelog ] Fixes: b5dc8e6c21e7 "x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors" Signed-off-by: Keith Busch Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index ad59d70..ef49551 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -256,7 +256,8 @@ static void clear_irq_vector(int irq, struct apic_chip_data *data) struct irq_desc *desc; int cpu, vector; - BUG_ON(!data->cfg.vector); + if (!data->cfg.vector) + return; vector = data->cfg.vector; for_each_cpu_and(cpu, data->domain, cpu_online_mask) -- cgit v0.10.2 From 811c6688774613a78bfa020f64b570b73f6974c8 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Fri, 15 Apr 2016 16:22:16 +0200 Subject: rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [] rbd_watch_cb+0x34/0x180 [rbd] [] do_event_work+0x40/0xb0 [libceph] [] process_one_work+0x17b/0x470 [] worker_thread+0x11b/0x400 [] ? rescuer_thread+0x400/0x400 [] kthread+0xcf/0xe0 [] ? finish_task_switch+0x53/0x170 [] ? kthread_create_on_node+0x140/0x140 [] ret_from_fork+0x58/0x90 [] ? kthread_create_on_node+0x140/0x140 RIP [] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [] ? rbd_parent_request_create+0x150/0x150 [] rbd_dev_refresh+0x59/0x390 [] rbd_watch_cb+0x69/0x290 [] do_event_work+0x10f/0x1c0 [] process_one_work+0x689/0x1a80 [] ? process_one_work+0x5e7/0x1a80 [] ? finish_task_switch+0x225/0x640 [] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [] worker_thread+0xd9/0x1320 [] ? process_one_work+0x1a80/0x1a80 [] kthread+0x21d/0x2e0 [] ? kthread_stop+0x550/0x550 [] ret_from_fork+0x22/0x40 [] ? kthread_stop+0x550/0x550 RIP [] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 94a1843..25d22da 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -538,7 +538,6 @@ static int _rbd_dev_v2_snap_size(struct rbd_device *rbd_dev, u64 snap_id, u8 *order, u64 *snap_size); static int _rbd_dev_v2_snap_features(struct rbd_device *rbd_dev, u64 snap_id, u64 *snap_features); -static u64 rbd_snap_id_by_name(struct rbd_device *rbd_dev, const char *name); static int rbd_open(struct block_device *bdev, fmode_t mode) { @@ -3127,9 +3126,6 @@ static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) struct rbd_device *rbd_dev = (struct rbd_device *)data; int ret; - if (!rbd_dev) - return; - dout("%s: \"%s\" notify_id %llu opcode %u\n", __func__, rbd_dev->header_name, (unsigned long long)notify_id, (unsigned int)opcode); @@ -3263,6 +3259,9 @@ static void rbd_dev_header_unwatch_sync(struct rbd_device *rbd_dev) ceph_osdc_cancel_event(rbd_dev->watch_event); rbd_dev->watch_event = NULL; + + dout("%s flushing notifies\n", __func__); + ceph_osdc_flush_notifies(&rbd_dev->rbd_client->client->osdc); } /* @@ -3642,21 +3641,14 @@ static void rbd_exists_validate(struct rbd_device *rbd_dev) static void rbd_dev_update_size(struct rbd_device *rbd_dev) { sector_t size; - bool removing; /* - * Don't hold the lock while doing disk operations, - * or lock ordering will conflict with the bdev mutex via: - * rbd_add() -> blkdev_get() -> rbd_open() + * If EXISTS is not set, rbd_dev->disk may be NULL, so don't + * try to update its size. If REMOVING is set, updating size + * is just useless work since the device can't be opened. */ - spin_lock_irq(&rbd_dev->lock); - removing = test_bit(RBD_DEV_FLAG_REMOVING, &rbd_dev->flags); - spin_unlock_irq(&rbd_dev->lock); - /* - * If the device is being removed, rbd_dev->disk has - * been destroyed, so don't try to update its size - */ - if (!removing) { + if (test_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags) && + !test_bit(RBD_DEV_FLAG_REMOVING, &rbd_dev->flags)) { size = (sector_t)rbd_dev->mapping.size / SECTOR_SIZE; dout("setting size to %llu sectors", (unsigned long long)size); set_capacity(rbd_dev->disk, size); @@ -5187,6 +5179,10 @@ out_err: return ret; } +/* + * rbd_dev->header_rwsem must be locked for write and will be unlocked + * upon return. + */ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) { int ret; @@ -5195,7 +5191,7 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) ret = rbd_dev_id_get(rbd_dev); if (ret) - return ret; + goto err_out_unlock; BUILD_BUG_ON(DEV_NAME_LEN < sizeof (RBD_DRV_NAME) + MAX_INT_FORMAT_WIDTH); @@ -5236,8 +5232,9 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) /* Everything's ready. Announce the disk to the world. */ set_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); - add_disk(rbd_dev->disk); + up_write(&rbd_dev->header_rwsem); + add_disk(rbd_dev->disk); pr_info("%s: added with size 0x%llx\n", rbd_dev->disk->disk_name, (unsigned long long) rbd_dev->mapping.size); @@ -5252,6 +5249,8 @@ err_out_blkdev: unregister_blkdev(rbd_dev->major, rbd_dev->name); err_out_id: rbd_dev_id_put(rbd_dev); +err_out_unlock: + up_write(&rbd_dev->header_rwsem); return ret; } @@ -5442,6 +5441,7 @@ static ssize_t do_rbd_add(struct bus_type *bus, spec = NULL; /* rbd_dev now owns this */ rbd_opts = NULL; /* rbd_dev now owns this */ + down_write(&rbd_dev->header_rwsem); rc = rbd_dev_image_probe(rbd_dev, 0); if (rc < 0) goto err_out_rbd_dev; @@ -5471,6 +5471,7 @@ out: return rc; err_out_rbd_dev: + up_write(&rbd_dev->header_rwsem); rbd_dev_destroy(rbd_dev); err_out_client: rbd_put_client(rbdc); @@ -5577,12 +5578,6 @@ static ssize_t do_rbd_remove(struct bus_type *bus, return ret; rbd_dev_header_unwatch_sync(rbd_dev); - /* - * flush remaining watch callbacks - these must be complete - * before the osd_client is shutdown - */ - dout("%s: flushing notifies", __func__); - ceph_osdc_flush_notifies(&rbd_dev->rbd_client->client->osdc); /* * Don't free anything from rbd_dev->disk until after all -- cgit v0.10.2 From d3767f0faeda5abdf205f947ae912d48dc70fa06 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 13 Apr 2016 14:15:50 +0200 Subject: rbd: report unsupported features to syslog ... instead of just returning an error. Signed-off-by: Ilya Dryomov Reviewed-by: Josh Durgin diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 25d22da..0ede6d7 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4183,7 +4183,7 @@ static int _rbd_dev_v2_snap_features(struct rbd_device *rbd_dev, u64 snap_id, __le64 features; __le64 incompat; } __attribute__ ((packed)) features_buf = { 0 }; - u64 incompat; + u64 unsup; int ret; ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name, @@ -4196,9 +4196,12 @@ static int _rbd_dev_v2_snap_features(struct rbd_device *rbd_dev, u64 snap_id, if (ret < sizeof (features_buf)) return -ERANGE; - incompat = le64_to_cpu(features_buf.incompat); - if (incompat & ~RBD_FEATURES_SUPPORTED) + unsup = le64_to_cpu(features_buf.incompat) & ~RBD_FEATURES_SUPPORTED; + if (unsup) { + rbd_warn(rbd_dev, "image uses unsupported features: 0x%llx", + unsup); return -ENXIO; + } *snap_features = le64_to_cpu(features_buf.features); -- cgit v0.10.2 From 2963070a0f8184fe40be11927344e3fcc7e18e7c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 26 Apr 2016 23:37:26 +0800 Subject: mmc: sunxi: Disable eMMC HS-DDR (MMC_CAP_1_8V_DDR) for Allwinner A80 eMMC HS-DDR no longer works on the A80, despite it working when support for this developed. Disable it for now. Signed-off-by: Chen-Yu Tsai Signed-off-by: Ulf Hansson diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index 8372a41..7fc8b7a 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -1129,6 +1129,11 @@ static int sunxi_mmc_probe(struct platform_device *pdev) MMC_CAP_1_8V_DDR | MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ; + /* TODO MMC DDR is not working on A80 */ + if (of_device_is_compatible(pdev->dev.of_node, + "allwinner,sun9i-a80-mmc")) + mmc->caps &= ~MMC_CAP_1_8V_DDR; + ret = mmc_of_parse(mmc); if (ret) goto error_free_dma; -- cgit v0.10.2 From 986ef95ecdd3eb6fa29433e68faa94c7624083be Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Thu, 31 Mar 2016 19:03:25 +0300 Subject: IB/mlx5: Expose correct max_sge_rd limit mlx5 devices (Connect-IB, ConnectX-4, ConnectX-4-LX) has a limitation where rdma read work queue entries cannot exceed 512 bytes. A rdma_read wqe needs to fit in 512 bytes: - wqe control segment (16 bytes) - rdma segment (16 bytes) - scatter elements (16 bytes each) So max_sge_rd should be: (512 - 16 - 16) / 16 = 30. Cc: linux-stable@vger.kernel.org Reported-by: Christoph Hellwig Tested-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 5acf346..049754f 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -530,7 +530,7 @@ static int mlx5_ib_query_device(struct ib_device *ibdev, sizeof(struct mlx5_wqe_ctrl_seg)) / sizeof(struct mlx5_wqe_data_seg); props->max_sge = min(max_rq_sg, max_sq_sg); - props->max_sge_rd = props->max_sge; + props->max_sge_rd = MLX5_MAX_SGE_RD; props->max_cq = 1 << MLX5_CAP_GEN(mdev, log_max_cq); props->max_cqe = (1 << MLX5_CAP_GEN(mdev, log_max_cq_sz)) - 1; props->max_mr = 1 << MLX5_CAP_GEN(mdev, log_max_mkey); diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 8156e3c..b3575f3 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -392,6 +392,17 @@ enum { MLX5_CAP_OFF_CMDIF_CSUM = 46, }; +enum { + /* + * Max wqe size for rdma read is 512 bytes, so this + * limits our max_sge_rd as the wqe needs to fit: + * - ctrl segment (16 bytes) + * - rdma segment (16 bytes) + * - scatter elements (16 bytes each) + */ + MLX5_MAX_SGE_RD = (512 - 16 - 16) / 16 +}; + struct mlx5_inbox_hdr { __be16 opcode; u8 rsvd[4]; -- cgit v0.10.2 From e7d2c25d94bf4bb6f73d185e5514414a15a56f46 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Sun, 3 Apr 2016 15:03:12 +0300 Subject: MAINTAINERS: Update iser/isert maintainer contact info Signed-off-by: Sagi Grimberg Acked-by: Nicholas Bellinger Signed-off-by: Doug Ledford diff --git a/MAINTAINERS b/MAINTAINERS index 1c32f8a..0341324 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6027,7 +6027,7 @@ F: include/scsi/*iscsi* ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR M: Or Gerlitz -M: Sagi Grimberg +M: Sagi Grimberg M: Roi Dayan L: linux-rdma@vger.kernel.org S: Supported @@ -6037,7 +6037,7 @@ Q: http://patchwork.kernel.org/project/linux-rdma/list/ F: drivers/infiniband/ulp/iser/ ISCSI EXTENSIONS FOR RDMA (ISER) TARGET -M: Sagi Grimberg +M: Sagi Grimberg T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master L: linux-rdma@vger.kernel.org L: target-devel@vger.kernel.org -- cgit v0.10.2 From f19bd643dbded8672bfeffe9e51322464e4a9239 Mon Sep 17 00:00:00 2001 From: Mitko Haralanov Date: Tue, 12 Apr 2016 10:45:57 -0700 Subject: IB/hfi1: Prevent NULL pointer deferences in caching code There is a potential kernel crash when the MMU notifier calls the invalidation routines in the hfi1 pinned page caching code for sdma. The invalidation routine could call the remove callback for the node, which in turn ends up dereferencing the current task_struct to get a pointer to the mm_struct. However, the mm_struct pointer could be NULL resulting in the following backtrace: BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 IP: [] sdma_rb_remove+0xaa/0x100 [hfi1] 15 task: ffff88085e66e080 ti: ffff88085c244000 task.ti: ffff88085c244000 RIP: 0010:[] [] sdma_rb_remove+0xaa/0x100 [hfi1] RSP: 0000:ffff88085c245878 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88105b9bbd40 RCX: ffffea003931a830 RDX: 0000000000000004 RSI: ffff88105754a9c0 RDI: ffff88105754a9c0 RBP: ffff88085c245890 R08: ffff88105b9bbd70 R09: 00000000fffffffb R10: ffff88105b9bbd58 R11: 0000000000000013 R12: ffff88105754a9c0 R13: 0000000000000001 R14: 0000000000000001 R15: ffff88105b9bbd40 FS: 0000000000000000(0000) GS:ffff88107ef40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 0000000001a0b000 CR4: 00000000001407e0 Stack: ffff88105b9bbd40 ffff88080ec481a8 ffff88080ec481b8 ffff88085c2458c0 ffffffffa03fa00e ffff88080ec48190 ffff88080ed9cd00 0000000001024000 0000000000000000 ffff88085c245920 ffffffffa03fa0e7 0000000000000282 Call Trace: [] __mmu_rb_remove.isra.5+0x5e/0x70 [hfi1] [] mmu_notifier_mem_invalidate+0xc7/0xf0 [hfi1] [] mmu_notifier_page+0x13/0x20 [hfi1] [] __mmu_notifier_invalidate_page+0x50/0x70 [] try_to_unmap_one+0x20b/0x470 [] try_to_unmap_anon+0xa7/0x120 [] try_to_unmap+0x4d/0x60 [] shrink_page_list+0x2eb/0x9d0 [] shrink_inactive_list+0x243/0x490 [] shrink_lruvec+0x4c1/0x640 [] shrink_zone+0x31/0x100 [] kswapd_shrink_zone.constprop.62+0xef/0x1c0 [] kswapd+0x403/0x7e0 [] ? shrink_all_memory+0xf0/0xf0 [] kthread+0xc0/0xd0 [] ? insert_kthread_work+0x40/0x40 [] ret_from_fork+0x7c/0xb0 [] ? insert_kthread_work+0x40/0x40 To correct this, the mm_struct passed to us by the MMU notifier is used (which is what should have been done to begin with). This avoids the broken derefences and ensures that the correct mm_struct is used. Reviewed-by: Dennis Dalessandro Reviewed-by: Dean Luick Signed-off-by: Mitko Haralanov Signed-off-by: Doug Ledford diff --git a/drivers/staging/rdma/hfi1/mmu_rb.c b/drivers/staging/rdma/hfi1/mmu_rb.c index c7ad016..eac4d04 100644 --- a/drivers/staging/rdma/hfi1/mmu_rb.c +++ b/drivers/staging/rdma/hfi1/mmu_rb.c @@ -71,6 +71,7 @@ static inline void mmu_notifier_range_start(struct mmu_notifier *, struct mm_struct *, unsigned long, unsigned long); static void mmu_notifier_mem_invalidate(struct mmu_notifier *, + struct mm_struct *, unsigned long, unsigned long); static struct mmu_rb_node *__mmu_rb_search(struct mmu_rb_handler *, unsigned long, unsigned long); @@ -137,7 +138,7 @@ void hfi1_mmu_rb_unregister(struct rb_root *root) rbnode = rb_entry(node, struct mmu_rb_node, node); rb_erase(node, root); if (handler->ops->remove) - handler->ops->remove(root, rbnode, false); + handler->ops->remove(root, rbnode, NULL); } } @@ -201,14 +202,14 @@ static struct mmu_rb_node *__mmu_rb_search(struct mmu_rb_handler *handler, } static void __mmu_rb_remove(struct mmu_rb_handler *handler, - struct mmu_rb_node *node, bool arg) + struct mmu_rb_node *node, struct mm_struct *mm) { /* Validity of handler and node pointers has been checked by caller. */ hfi1_cdbg(MMU, "Removing node addr 0x%llx, len %u", node->addr, node->len); __mmu_int_rb_remove(node, handler->root); if (handler->ops->remove) - handler->ops->remove(handler->root, node, arg); + handler->ops->remove(handler->root, node, mm); } struct mmu_rb_node *hfi1_mmu_rb_search(struct rb_root *root, unsigned long addr, @@ -237,7 +238,7 @@ void hfi1_mmu_rb_remove(struct rb_root *root, struct mmu_rb_node *node) return; spin_lock_irqsave(&handler->lock, flags); - __mmu_rb_remove(handler, node, false); + __mmu_rb_remove(handler, node, NULL); spin_unlock_irqrestore(&handler->lock, flags); } @@ -260,7 +261,7 @@ unlock: static inline void mmu_notifier_page(struct mmu_notifier *mn, struct mm_struct *mm, unsigned long addr) { - mmu_notifier_mem_invalidate(mn, addr, addr + PAGE_SIZE); + mmu_notifier_mem_invalidate(mn, mm, addr, addr + PAGE_SIZE); } static inline void mmu_notifier_range_start(struct mmu_notifier *mn, @@ -268,25 +269,28 @@ static inline void mmu_notifier_range_start(struct mmu_notifier *mn, unsigned long start, unsigned long end) { - mmu_notifier_mem_invalidate(mn, start, end); + mmu_notifier_mem_invalidate(mn, mm, start, end); } static void mmu_notifier_mem_invalidate(struct mmu_notifier *mn, + struct mm_struct *mm, unsigned long start, unsigned long end) { struct mmu_rb_handler *handler = container_of(mn, struct mmu_rb_handler, mn); struct rb_root *root = handler->root; - struct mmu_rb_node *node; + struct mmu_rb_node *node, *ptr = NULL; unsigned long flags; spin_lock_irqsave(&handler->lock, flags); - for (node = __mmu_int_rb_iter_first(root, start, end - 1); node; - node = __mmu_int_rb_iter_next(node, start, end - 1)) { + for (node = __mmu_int_rb_iter_first(root, start, end - 1); + node; node = ptr) { + /* Guard against node removal. */ + ptr = __mmu_int_rb_iter_next(node, start, end - 1); hfi1_cdbg(MMU, "Invalidating node addr 0x%llx, len %u", node->addr, node->len); if (handler->ops->invalidate(root, node)) - __mmu_rb_remove(handler, node, true); + __mmu_rb_remove(handler, node, mm); } spin_unlock_irqrestore(&handler->lock, flags); } diff --git a/drivers/staging/rdma/hfi1/mmu_rb.h b/drivers/staging/rdma/hfi1/mmu_rb.h index f8523fd..19a306e 100644 --- a/drivers/staging/rdma/hfi1/mmu_rb.h +++ b/drivers/staging/rdma/hfi1/mmu_rb.h @@ -59,7 +59,8 @@ struct mmu_rb_node { struct mmu_rb_ops { bool (*filter)(struct mmu_rb_node *, unsigned long, unsigned long); int (*insert)(struct rb_root *, struct mmu_rb_node *); - void (*remove)(struct rb_root *, struct mmu_rb_node *, bool); + void (*remove)(struct rb_root *, struct mmu_rb_node *, + struct mm_struct *); int (*invalidate)(struct rb_root *, struct mmu_rb_node *); }; diff --git a/drivers/staging/rdma/hfi1/user_exp_rcv.c b/drivers/staging/rdma/hfi1/user_exp_rcv.c index 0861e09..5b72849 100644 --- a/drivers/staging/rdma/hfi1/user_exp_rcv.c +++ b/drivers/staging/rdma/hfi1/user_exp_rcv.c @@ -87,7 +87,8 @@ static u32 find_phys_blocks(struct page **, unsigned, struct tid_pageset *); static int set_rcvarray_entry(struct file *, unsigned long, u32, struct tid_group *, struct page **, unsigned); static int mmu_rb_insert(struct rb_root *, struct mmu_rb_node *); -static void mmu_rb_remove(struct rb_root *, struct mmu_rb_node *, bool); +static void mmu_rb_remove(struct rb_root *, struct mmu_rb_node *, + struct mm_struct *); static int mmu_rb_invalidate(struct rb_root *, struct mmu_rb_node *); static int program_rcvarray(struct file *, unsigned long, struct tid_group *, struct tid_pageset *, unsigned, u16, struct page **, @@ -899,7 +900,7 @@ static int unprogram_rcvarray(struct file *fp, u32 tidinfo, if (!node || node->rcventry != (uctxt->expected_base + rcventry)) return -EBADF; if (HFI1_CAP_IS_USET(TID_UNMAP)) - mmu_rb_remove(&fd->tid_rb_root, &node->mmu, false); + mmu_rb_remove(&fd->tid_rb_root, &node->mmu, NULL); else hfi1_mmu_rb_remove(&fd->tid_rb_root, &node->mmu); @@ -965,7 +966,7 @@ static void unlock_exp_tids(struct hfi1_ctxtdata *uctxt, continue; if (HFI1_CAP_IS_USET(TID_UNMAP)) mmu_rb_remove(&fd->tid_rb_root, - &node->mmu, false); + &node->mmu, NULL); else hfi1_mmu_rb_remove(&fd->tid_rb_root, &node->mmu); @@ -1032,7 +1033,7 @@ static int mmu_rb_insert(struct rb_root *root, struct mmu_rb_node *node) } static void mmu_rb_remove(struct rb_root *root, struct mmu_rb_node *node, - bool notifier) + struct mm_struct *mm) { struct hfi1_filedata *fdata = container_of(root, struct hfi1_filedata, tid_rb_root); diff --git a/drivers/staging/rdma/hfi1/user_sdma.c b/drivers/staging/rdma/hfi1/user_sdma.c index ab6b6a4..e08c74f 100644 --- a/drivers/staging/rdma/hfi1/user_sdma.c +++ b/drivers/staging/rdma/hfi1/user_sdma.c @@ -299,7 +299,8 @@ static int defer_packet_queue( static void activate_packet_queue(struct iowait *, int); static bool sdma_rb_filter(struct mmu_rb_node *, unsigned long, unsigned long); static int sdma_rb_insert(struct rb_root *, struct mmu_rb_node *); -static void sdma_rb_remove(struct rb_root *, struct mmu_rb_node *, bool); +static void sdma_rb_remove(struct rb_root *, struct mmu_rb_node *, + struct mm_struct *); static int sdma_rb_invalidate(struct rb_root *, struct mmu_rb_node *); static struct mmu_rb_ops sdma_rb_ops = { @@ -1063,8 +1064,10 @@ static int pin_vector_pages(struct user_sdma_request *req, rb_node = hfi1_mmu_rb_search(&pq->sdma_rb_root, (unsigned long)iovec->iov.iov_base, iovec->iov.iov_len); - if (rb_node) + if (rb_node && !IS_ERR(rb_node)) node = container_of(rb_node, struct sdma_mmu_node, rb); + else + rb_node = NULL; if (!node) { node = kzalloc(sizeof(*node), GFP_KERNEL); @@ -1502,7 +1505,7 @@ static void user_sdma_free_request(struct user_sdma_request *req, bool unpin) &req->pq->sdma_rb_root, (unsigned long)req->iovs[i].iov.iov_base, req->iovs[i].iov.iov_len); - if (!mnode) + if (!mnode || IS_ERR(mnode)) continue; node = container_of(mnode, struct sdma_mmu_node, rb); @@ -1547,7 +1550,7 @@ static int sdma_rb_insert(struct rb_root *root, struct mmu_rb_node *mnode) } static void sdma_rb_remove(struct rb_root *root, struct mmu_rb_node *mnode, - bool notifier) + struct mm_struct *mm) { struct sdma_mmu_node *node = container_of(mnode, struct sdma_mmu_node, rb); @@ -1557,14 +1560,19 @@ static void sdma_rb_remove(struct rb_root *root, struct mmu_rb_node *mnode, node->pq->n_locked -= node->npages; spin_unlock(&node->pq->evict_lock); - unpin_vector_pages(notifier ? NULL : current->mm, node->pages, - node->npages); + /* + * If mm is set, we are being called by the MMU notifier and we + * should not pass a mm_struct to unpin_vector_page(). This is to + * prevent a deadlock when hfi1_release_user_pages() attempts to + * take the mmap_sem, which the MMU notifier has already taken. + */ + unpin_vector_pages(mm ? NULL : current->mm, node->pages, node->npages); /* * If called by the MMU notifier, we have to adjust the pinned * page count ourselves. */ - if (notifier) - current->mm->pinned_vm -= node->npages; + if (mm) + mm->pinned_vm -= node->npages; kfree(node); } -- cgit v0.10.2 From de82bdff62a9078a6e4f1452e2f2604686e51e49 Mon Sep 17 00:00:00 2001 From: Mitko Haralanov Date: Tue, 12 Apr 2016 10:46:03 -0700 Subject: IB/hfi1: Fix deadlock caused by locking with wrong scope The locking around the interval RB tree is designed to prevent access to the tree while it's being modified. The locking in its current form is too overzealous, which is causing a deadlock in certain cases with the following backtrace: Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0 CPU: 0 PID: 5836 Comm: IMB-MPI1 Tainted: G O 3.12.18-wfr+ #1 0000000000000000 ffff88087f206c50 ffffffff814f1caa ffffffff817b53f0 ffff88087f206cc8 ffffffff814ecd56 0000000000000010 ffff88087f206cd8 ffff88087f206c78 0000000000000000 0000000000000000 0000000000001662 Call Trace: [] dump_stack+0x45/0x56 [] panic+0xc2/0x1cb [] ? restart_watchdog_hrtimer+0x50/0x50 [] watchdog_overflow_callback+0xc2/0xd0 [] __perf_event_overflow+0x8e/0x2b0 [] perf_event_overflow+0x14/0x20 [] intel_pmu_handle_irq+0x1b6/0x390 [] perf_event_nmi_handler+0x2b/0x50 [] nmi_handle.isra.3+0x88/0x180 [] do_nmi+0x169/0x310 [] end_repeat_nmi+0x1e/0x2e [] ? unmap_single+0x30/0x30 [] ? _raw_spin_lock_irqsave+0x2d/0x40 [] ? _raw_spin_lock_irqsave+0x2d/0x40 [] ? _raw_spin_lock_irqsave+0x2d/0x40 <> [] hfi1_mmu_rb_search+0x38/0x70 [hfi1] [] user_sdma_free_request+0xcb/0x120 [hfi1] [] user_sdma_txreq_cb+0x263/0x350 [hfi1] [] ? sdma_txclean+0x27/0x1c0 [hfi1] [] ? user_sdma_send_pkts+0x1710/0x1710 [hfi1] [] sdma_make_progress+0x166/0x480 [hfi1] [] ? ttwu_do_wakeup+0x19/0xd0 [] sdma_engine_interrupt+0x8e/0x100 [hfi1] [] sdma_interrupt+0x5d/0xa0 [hfi1] [] handle_irq_event_percpu+0x47/0x1d0 [] handle_irq_event+0x37/0x60 [] handle_edge_irq+0x6f/0x120 [] handle_irq+0xbf/0x150 [] ? irq_enter+0x17/0x80 [] do_IRQ+0x4d/0xc0 [] common_interrupt+0x6a/0x6a [] ? finish_task_switch+0x54/0xe0 [] __schedule+0x3b6/0x7e0 [] __cond_resched+0x26/0x30 [] _cond_resched+0x3a/0x50 [] down_write+0x12/0x30 [] hfi1_release_user_pages+0x69/0x90 [hfi1] [] sdma_rb_remove+0x9a/0xc0 [hfi1] [] __mmu_rb_remove.isra.5+0x5d/0x70 [hfi1] [] hfi1_mmu_rb_remove+0x56/0x70 [hfi1] [] hfi1_user_sdma_process_request+0x74b/0x1160 [hfi1] [] hfi1_aio_write+0xc3/0x100 [hfi1] [] do_sync_readv_writev+0x4c/0x80 [] do_readv_writev+0xbb/0x230 [] ? fsnotify+0x241/0x320 [] ? finish_task_switch+0x54/0xe0 [] vfs_writev+0x35/0x60 [] SyS_writev+0x49/0xc0 [] ? __audit_syscall_exit+0x1f6/0x2a0 [] system_call_fastpath+0x16/0x1b As evident from the backtrace above, the process was being put to sleep while holding the lock. Limiting the scope of the lock only to the RB tree operation fixes the above error allowing for proper locking and the process being put to sleep when needed. Reviewed-by: Dennis Dalessandro Reviewed-by: Dean Luick Signed-off-by: Mitko Haralanov Signed-off-by: Doug Ledford diff --git a/drivers/staging/rdma/hfi1/mmu_rb.c b/drivers/staging/rdma/hfi1/mmu_rb.c index eac4d04..b3f0682 100644 --- a/drivers/staging/rdma/hfi1/mmu_rb.c +++ b/drivers/staging/rdma/hfi1/mmu_rb.c @@ -177,7 +177,7 @@ unlock: return ret; } -/* Caller must host handler lock */ +/* Caller must hold handler lock */ static struct mmu_rb_node *__mmu_rb_search(struct mmu_rb_handler *handler, unsigned long addr, unsigned long len) @@ -201,13 +201,19 @@ static struct mmu_rb_node *__mmu_rb_search(struct mmu_rb_handler *handler, return node; } +/* Caller must *not* hold handler lock. */ static void __mmu_rb_remove(struct mmu_rb_handler *handler, struct mmu_rb_node *node, struct mm_struct *mm) { + unsigned long flags; + /* Validity of handler and node pointers has been checked by caller. */ hfi1_cdbg(MMU, "Removing node addr 0x%llx, len %u", node->addr, node->len); + spin_lock_irqsave(&handler->lock, flags); __mmu_int_rb_remove(node, handler->root); + spin_unlock_irqrestore(&handler->lock, flags); + if (handler->ops->remove) handler->ops->remove(handler->root, node, mm); } @@ -232,14 +238,11 @@ struct mmu_rb_node *hfi1_mmu_rb_search(struct rb_root *root, unsigned long addr, void hfi1_mmu_rb_remove(struct rb_root *root, struct mmu_rb_node *node) { struct mmu_rb_handler *handler = find_mmu_handler(root); - unsigned long flags; if (!handler || !node) return; - spin_lock_irqsave(&handler->lock, flags); __mmu_rb_remove(handler, node, NULL); - spin_unlock_irqrestore(&handler->lock, flags); } static struct mmu_rb_handler *find_mmu_handler(struct rb_root *root) @@ -289,8 +292,11 @@ static void mmu_notifier_mem_invalidate(struct mmu_notifier *mn, ptr = __mmu_int_rb_iter_next(node, start, end - 1); hfi1_cdbg(MMU, "Invalidating node addr 0x%llx, len %u", node->addr, node->len); - if (handler->ops->invalidate(root, node)) + if (handler->ops->invalidate(root, node)) { + spin_unlock_irqrestore(&handler->lock, flags); __mmu_rb_remove(handler, node, mm); + spin_lock_irqsave(&handler->lock, flags); + } } spin_unlock_irqrestore(&handler->lock, flags); } -- cgit v0.10.2 From 849e3e9398608c26a7c54bf9fbf3288f7ced6bfb Mon Sep 17 00:00:00 2001 From: Mitko Haralanov Date: Tue, 12 Apr 2016 10:46:16 -0700 Subject: IB/hfi1: Prevent unpinning of wrong pages The routine used by the SDMA cache to handle already cached nodes can extend an already existing node. In its error handling code, the routine will unpin pages when not all pages of the buffer extension were pinned. There was a bug in that part of the routine, which would mistakenly unpin pages from the original set rather than the newly pinned pages. This commit fixes that bug by offsetting the page array to the proper place pointing at the beginning of the newly pinned pages. Reviewed-by: Dean Luick Signed-off-by: Mitko Haralanov Signed-off-by: Doug Ledford diff --git a/drivers/staging/rdma/hfi1/user_sdma.c b/drivers/staging/rdma/hfi1/user_sdma.c index e08c74f..d53a659 100644 --- a/drivers/staging/rdma/hfi1/user_sdma.c +++ b/drivers/staging/rdma/hfi1/user_sdma.c @@ -278,7 +278,8 @@ static inline void pq_update(struct hfi1_user_sdma_pkt_q *); static void user_sdma_free_request(struct user_sdma_request *, bool); static int pin_vector_pages(struct user_sdma_request *, struct user_sdma_iovec *); -static void unpin_vector_pages(struct mm_struct *, struct page **, unsigned); +static void unpin_vector_pages(struct mm_struct *, struct page **, unsigned, + unsigned); static int check_header_template(struct user_sdma_request *, struct hfi1_pkt_header *, u32, u32); static int set_txreq_header(struct user_sdma_request *, @@ -1110,7 +1111,8 @@ retry: goto bail; } if (pinned != npages) { - unpin_vector_pages(current->mm, pages, pinned); + unpin_vector_pages(current->mm, pages, node->npages, + pinned); ret = -EFAULT; goto bail; } @@ -1150,9 +1152,9 @@ bail: } static void unpin_vector_pages(struct mm_struct *mm, struct page **pages, - unsigned npages) + unsigned start, unsigned npages) { - hfi1_release_user_pages(mm, pages, npages, 0); + hfi1_release_user_pages(mm, pages + start, npages, 0); kfree(pages); } @@ -1566,7 +1568,8 @@ static void sdma_rb_remove(struct rb_root *root, struct mmu_rb_node *mnode, * prevent a deadlock when hfi1_release_user_pages() attempts to * take the mmap_sem, which the MMU notifier has already taken. */ - unpin_vector_pages(mm ? NULL : current->mm, node->pages, node->npages); + unpin_vector_pages(mm ? NULL : current->mm, node->pages, 0, + node->npages); /* * If called by the MMU notifier, we have to adjust the pinned * page count ourselves. -- cgit v0.10.2 From e6d2e0176e1f3c1e1534851b66c0b972f03ff069 Mon Sep 17 00:00:00 2001 From: Jubin John Date: Tue, 12 Apr 2016 10:47:00 -0700 Subject: IB/rdmavt: Fix send scheduling call_send is used to determine whether to send immediately or schedule a send for later. The current logic in rdmavt is inverted and has a negative impact on the latency of the hfi1 and qib drivers. Fix this regression by correctly calling send immediately when call_send is set. Reviewed-by: Dennis Dalessandro Reviewed-by: Mike Marciniszyn Signed-off-by: Jubin John Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index bd82a69..a9e3bcc 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -1637,9 +1637,9 @@ bail: spin_unlock_irqrestore(&qp->s_hlock, flags); if (nreq) { if (call_send) - rdi->driver_f.schedule_send_no_lock(qp); - else rdi->driver_f.do_send(qp); + else + rdi->driver_f.schedule_send_no_lock(qp); } return err; } -- cgit v0.10.2 From b9b06cb6fedab10665a2d527464b45f332d17465 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 20 Apr 2016 06:05:30 -0700 Subject: IB/hfi1: Fix missing lock/unlock in verbs drain callback The iowait_sdma_drained() callback lacked locking to protect the qp s_flags field. This causes the s_flags to be out of sync on multiple CPUs, potentially corrupting the s_flags. Fixes: a545f5308b6c ("staging/rdma/hfi: fix CQ completion order issue") Reviewed-by: Sebastian Sanchez Signed-off-by: Mike Marciniszyn Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford diff --git a/drivers/staging/rdma/hfi1/qp.c b/drivers/staging/rdma/hfi1/qp.c index 29a5ad2..dc9119e 100644 --- a/drivers/staging/rdma/hfi1/qp.c +++ b/drivers/staging/rdma/hfi1/qp.c @@ -519,10 +519,12 @@ static void iowait_sdma_drained(struct iowait *wait) * do the flush work until that QP's * sdma work has finished. */ + spin_lock(&qp->s_lock); if (qp->s_flags & RVT_S_WAIT_DMA) { qp->s_flags &= ~RVT_S_WAIT_DMA; hfi1_schedule_send(qp); } + spin_unlock(&qp->s_lock); } /** -- cgit v0.10.2 From 94158442eb0c66bbb0b733999e108fa26a7673ef Mon Sep 17 00:00:00 2001 From: Mitko Haralanov Date: Wed, 20 Apr 2016 06:05:36 -0700 Subject: IB/hfi1: Don't attempt to free resources if initialization failed Attempting to free resources which have not been allocated and initialized properly led to the following kernel backtrace: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1] PGD 852a43067 PUD 85d4a6067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 2831 Comm: osu_bw Tainted: G IO 3.12.18-wfr+ #1 task: ffff88085b15b540 ti: ffff8808588fe000 task.ti: ffff8808588fe000 RIP: 0010:[] [] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1] RSP: 0018:ffff8808588ffde0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff880858a31800 RCX: 0000000000000000 RDX: ffff88085d971bc0 RSI: ffff880858a318f8 RDI: ffff880858a318c0 RBP: ffff8808588ffe20 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88087ffd6f40 R11: 0000000001100348 R12: ffff880852900000 R13: ffff880858a318c0 R14: 0000000000000000 R15: ffff88085d971be8 FS: 00007f4674e83740(0000) GS:ffff88087f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000085c377000 CR4: 00000000001407f0 Stack: ffffffffa0941a71 ffff880858a318f8 ffff88085d971bc0 ffff880858a31800 ffff880852900000 ffff880858a31800 00000000003ffff7 ffff88085d971bc0 ffff8808588ffe60 ffffffffa09663fc ffff8808588ffe60 ffff880858a31800 Call Trace: [] ? find_mmu_handler+0x51/0x70 [hfi1] [] hfi1_user_exp_rcv_free+0x6c/0x120 [hfi1] [] hfi1_file_close+0x1a9/0x340 [hfi1] [] __fput+0xe9/0x270 [] ____fput+0xe/0x10 [] task_work_run+0xa7/0xe0 [] do_notify_resume+0x59/0x80 [] int_signal+0x12/0x17 This commit re-arranges the context initialization code in a way that would allow for context event flags to be used to determine whether the context has been successfully initialized. In turn, this can be used to skip the resource de-allocation if they were never allocated in the first place. Fixes: 3abb33ac6521 ("staging/hfi1: Add TID cache receive init and free funcs") Reviewed-by: Dennis Dalessandro Signed-off-by: Mitko Haralanov Reviewed-by: Leon Romanovsky diff --git a/drivers/staging/rdma/hfi1/file_ops.c b/drivers/staging/rdma/hfi1/file_ops.c index 8396dc5..ec6c226 100644 --- a/drivers/staging/rdma/hfi1/file_ops.c +++ b/drivers/staging/rdma/hfi1/file_ops.c @@ -791,15 +791,16 @@ static int hfi1_file_close(struct inode *inode, struct file *fp) spin_unlock_irqrestore(&dd->uctxt_lock, flags); dd->rcd[uctxt->ctxt] = NULL; + + hfi1_user_exp_rcv_free(fdata); + hfi1_clear_ctxt_pkey(dd, uctxt->ctxt); + uctxt->rcvwait_to = 0; uctxt->piowait_to = 0; uctxt->rcvnowait = 0; uctxt->pionowait = 0; uctxt->event_flags = 0; - hfi1_user_exp_rcv_free(fdata); - hfi1_clear_ctxt_pkey(dd, uctxt->ctxt); - hfi1_stats.sps_ctxts--; if (++dd->freectxts == dd->num_user_contexts) aspm_enable_all(dd); @@ -1127,27 +1128,13 @@ bail: static int user_init(struct file *fp) { - int ret; unsigned int rcvctrl_ops = 0; struct hfi1_filedata *fd = fp->private_data; struct hfi1_ctxtdata *uctxt = fd->uctxt; /* make sure that the context has already been setup */ - if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags)) { - ret = -EFAULT; - goto done; - } - - /* - * Subctxts don't need to initialize anything since master - * has done it. - */ - if (fd->subctxt) { - ret = wait_event_interruptible(uctxt->wait, !test_bit( - HFI1_CTXT_MASTER_UNINIT, - &uctxt->event_flags)); - goto expected; - } + if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags)) + return -EFAULT; /* initialize poll variables... */ uctxt->urgent = 0; @@ -1202,19 +1189,7 @@ static int user_init(struct file *fp) wake_up(&uctxt->wait); } -expected: - /* - * Expected receive has to be setup for all processes (including - * shared contexts). However, it has to be done after the master - * context has been fully configured as it depends on the - * eager/expected split of the RcvArray entries. - * Setting it up here ensures that the subcontexts will be waiting - * (due to the above wait_event_interruptible() until the master - * is setup. - */ - ret = hfi1_user_exp_rcv_init(fp); -done: - return ret; + return 0; } static int get_ctxt_info(struct file *fp, void __user *ubase, __u32 len) @@ -1261,7 +1236,7 @@ static int setup_ctxt(struct file *fp) int ret = 0; /* - * Context should be set up only once (including allocation and + * Context should be set up only once, including allocation and * programming of eager buffers. This is done if context sharing * is not requested or by the master process. */ @@ -1282,10 +1257,29 @@ static int setup_ctxt(struct file *fp) if (ret) goto done; } + } else { + ret = wait_event_interruptible(uctxt->wait, !test_bit( + HFI1_CTXT_MASTER_UNINIT, + &uctxt->event_flags)); + if (ret) + goto done; } + ret = hfi1_user_sdma_alloc_queues(uctxt, fp); if (ret) goto done; + /* + * Expected receive has to be setup for all processes (including + * shared contexts). However, it has to be done after the master + * context has been fully configured as it depends on the + * eager/expected split of the RcvArray entries. + * Setting it up here ensures that the subcontexts will be waiting + * (due to the above wait_event_interruptible() until the master + * is setup. + */ + ret = hfi1_user_exp_rcv_init(fp); + if (ret) + goto done; set_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags); done: diff --git a/drivers/staging/rdma/hfi1/user_exp_rcv.c b/drivers/staging/rdma/hfi1/user_exp_rcv.c index 5b72849..8bd56d5 100644 --- a/drivers/staging/rdma/hfi1/user_exp_rcv.c +++ b/drivers/staging/rdma/hfi1/user_exp_rcv.c @@ -255,6 +255,8 @@ int hfi1_user_exp_rcv_free(struct hfi1_filedata *fd) struct hfi1_ctxtdata *uctxt = fd->uctxt; struct tid_group *grp, *gptr; + if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags)) + return 0; /* * The notifier would have been removed when the process'es mm * was freed. -- cgit v0.10.2 From 7723d8c2445c4dfa91f8df42703b56f8ade59af7 Mon Sep 17 00:00:00 2001 From: Dean Luick Date: Fri, 22 Apr 2016 11:17:03 -0700 Subject: IB/hfi1: Use kernel default llseek for ui device The ui device llseek had a mistake with SEEK_END and did not fully follow seek semantics. Correct all this by using a kernel supplied function for fixed size devices. Cc: Al Viro Reviewed-by: Dennis Dalessandro Signed-off-by: Dean Luick Signed-off-by: Doug Ledford diff --git a/drivers/staging/rdma/hfi1/file_ops.c b/drivers/staging/rdma/hfi1/file_ops.c index ec6c226..5415295 100644 --- a/drivers/staging/rdma/hfi1/file_ops.c +++ b/drivers/staging/rdma/hfi1/file_ops.c @@ -1559,29 +1559,8 @@ static loff_t ui_lseek(struct file *filp, loff_t offset, int whence) { struct hfi1_devdata *dd = filp->private_data; - switch (whence) { - case SEEK_SET: - break; - case SEEK_CUR: - offset += filp->f_pos; - break; - case SEEK_END: - offset = ((dd->kregend - dd->kregbase) + DC8051_DATA_MEM_SIZE) - - offset; - break; - default: - return -EINVAL; - } - - if (offset < 0) - return -EINVAL; - - if (offset >= (dd->kregend - dd->kregbase) + DC8051_DATA_MEM_SIZE) - return -EINVAL; - - filp->f_pos = offset; - - return filp->f_pos; + return fixed_size_llseek(filp, offset, whence, + (dd->kregend - dd->kregbase) + DC8051_DATA_MEM_SIZE); } /* NOTE: assumes unsigned long is 8 bytes */ -- cgit v0.10.2 From e6bd18f57aad1a2d1ef40e646d03ed0f2515c9e3 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Sun, 10 Apr 2016 19:13:13 -0600 Subject: IB/security: Restrict use of the write() interface The drivers/infiniband stack uses write() as a replacement for bi-directional ioctl(). This is not safe. There are ways to trigger write calls that result in the return structure that is normally written to user space being shunted off to user specified kernel memory instead. For the immediate repair, detect and deny suspicious accesses to the write API. For long term, update the user space libraries and the kernel API to something that doesn't present the same security vulnerabilities (likely a structured ioctl() interface). The impacted uAPI interfaces are generally only available if hardware from drivers/infiniband is installed in the system. Reported-by: Jann Horn Signed-off-by: Linus Torvalds Signed-off-by: Jason Gunthorpe [ Expanded check to all known write() entry points ] Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index 4a9aa04..7713ef0 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -48,6 +48,7 @@ #include +#include #include #include #include @@ -1103,6 +1104,9 @@ static ssize_t ib_ucm_write(struct file *filp, const char __user *buf, struct ib_ucm_cmd_hdr hdr; ssize_t result; + if (WARN_ON_ONCE(!ib_safe_file_access(filp))) + return -EACCES; + if (len < sizeof(hdr)) return -EINVAL; diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index dd3bcce..c0f3826 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -1574,6 +1574,9 @@ static ssize_t ucma_write(struct file *filp, const char __user *buf, struct rdma_ucm_cmd_hdr hdr; ssize_t ret; + if (WARN_ON_ONCE(!ib_safe_file_access(filp))) + return -EACCES; + if (len < sizeof(hdr)) return -EINVAL; diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 28ba2cc..31f422a 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -48,6 +48,8 @@ #include +#include + #include "uverbs.h" MODULE_AUTHOR("Roland Dreier"); @@ -709,6 +711,9 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, int srcu_key; ssize_t ret; + if (WARN_ON_ONCE(!ib_safe_file_access(filp))) + return -EACCES; + if (count < sizeof hdr) return -EINVAL; diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index e449e39..24f4a78 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -45,6 +45,8 @@ #include #include +#include + #include "qib.h" #include "qib_common.h" #include "qib_user_sdma.h" @@ -2067,6 +2069,9 @@ static ssize_t qib_write(struct file *fp, const char __user *data, ssize_t ret = 0; void *dest; + if (WARN_ON_ONCE(!ib_safe_file_access(fp))) + return -EACCES; + if (count < sizeof(cmd.type)) { ret = -EINVAL; goto bail; diff --git a/drivers/staging/rdma/hfi1/TODO b/drivers/staging/rdma/hfi1/TODO index 05de0da..4c6f1d7 100644 --- a/drivers/staging/rdma/hfi1/TODO +++ b/drivers/staging/rdma/hfi1/TODO @@ -3,4 +3,4 @@ July, 2015 - Remove unneeded file entries in sysfs - Remove software processing of IB protocol and place in library for use by qib, ipath (if still present), hfi1, and eventually soft-roce - +- Replace incorrect uAPI diff --git a/drivers/staging/rdma/hfi1/file_ops.c b/drivers/staging/rdma/hfi1/file_ops.c index 5415295..c1c5bf8 100644 --- a/drivers/staging/rdma/hfi1/file_ops.c +++ b/drivers/staging/rdma/hfi1/file_ops.c @@ -49,6 +49,8 @@ #include #include +#include + #include "hfi.h" #include "pio.h" #include "device.h" @@ -190,6 +192,10 @@ static ssize_t hfi1_file_write(struct file *fp, const char __user *data, int uctxt_required = 1; int must_be_root = 0; + /* FIXME: This interface cannot continue out of staging */ + if (WARN_ON_ONCE(!ib_safe_file_access(fp))) + return -EACCES; + if (count < sizeof(cmd)) { ret = -EINVAL; goto bail; diff --git a/include/rdma/ib.h b/include/rdma/ib.h index cf8f9e7..a6b9370 100644 --- a/include/rdma/ib.h +++ b/include/rdma/ib.h @@ -34,6 +34,7 @@ #define _RDMA_IB_H #include +#include struct ib_addr { union { @@ -86,4 +87,19 @@ struct sockaddr_ib { __u64 sib_scope_id; }; +/* + * The IB interfaces that use write() as bi-directional ioctl() are + * fundamentally unsafe, since there are lots of ways to trigger "write()" + * calls from various contexts with elevated privileges. That includes the + * traditional suid executable error message writes, but also various kernel + * interfaces that can write to file descriptors. + * + * This function provides protection for the legacy API by restricting the + * calling context. + */ +static inline bool ib_safe_file_access(struct file *filp) +{ + return filp->f_cred == current_cred() && segment_eq(get_fs(), USER_DS); +} + #endif /* _RDMA_IB_H */ -- cgit v0.10.2 From 1883598d4201361a6d2ce785095695f58071ee11 Mon Sep 17 00:00:00 2001 From: Charmaine Lee Date: Tue, 12 Apr 2016 08:14:23 -0700 Subject: drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION Fixes piglit tests nv_conditional_render-* crashes. Signed-off-by: Charmaine Lee Reviewed-by: Brian Paul Reviewed-by: Sinclair Yeh diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 723ba16..541b340 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -3305,7 +3305,7 @@ static const struct vmw_cmd_entry vmw_cmd_entries[SVGA_3D_CMD_MAX] = { true, false, true), VMW_CMD_DEF(SVGA_3D_CMD_DX_READBACK_QUERY, &vmw_cmd_invalid, true, false, true), - VMW_CMD_DEF(SVGA_3D_CMD_DX_SET_PREDICATION, &vmw_cmd_invalid, + VMW_CMD_DEF(SVGA_3D_CMD_DX_SET_PREDICATION, &vmw_cmd_dx_cid_check, true, false, true), VMW_CMD_DEF(SVGA_3D_CMD_DX_SET_VIEWPORTS, &vmw_cmd_dx_cid_check, true, false, true), -- cgit v0.10.2 From e02e58843153ce80a9fe7588def89b2638d40e64 Mon Sep 17 00:00:00 2001 From: Charmaine Lee Date: Tue, 12 Apr 2016 08:19:08 -0700 Subject: drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands. Instead of calling vmw_cmd_ok, call vmw_cmd_dx_cid_check to validate the context id for query commands. Signed-off-by: Charmaine Lee Reviewed-by: Sinclair Yeh diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 541b340..1a1a87c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -3293,15 +3293,15 @@ static const struct vmw_cmd_entry vmw_cmd_entries[SVGA_3D_CMD_MAX] = { &vmw_cmd_dx_cid_check, true, false, true), VMW_CMD_DEF(SVGA_3D_CMD_DX_DEFINE_QUERY, &vmw_cmd_dx_define_query, true, false, true), - VMW_CMD_DEF(SVGA_3D_CMD_DX_DESTROY_QUERY, &vmw_cmd_ok, + VMW_CMD_DEF(SVGA_3D_CMD_DX_DESTROY_QUERY, &vmw_cmd_dx_cid_check, true, false, true), VMW_CMD_DEF(SVGA_3D_CMD_DX_BIND_QUERY, &vmw_cmd_dx_bind_query, true, false, true), VMW_CMD_DEF(SVGA_3D_CMD_DX_SET_QUERY_OFFSET, - &vmw_cmd_ok, true, false, true), - VMW_CMD_DEF(SVGA_3D_CMD_DX_BEGIN_QUERY, &vmw_cmd_ok, + &vmw_cmd_dx_cid_check, true, false, true), + VMW_CMD_DEF(SVGA_3D_CMD_DX_BEGIN_QUERY, &vmw_cmd_dx_cid_check, true, false, true), - VMW_CMD_DEF(SVGA_3D_CMD_DX_END_QUERY, &vmw_cmd_ok, + VMW_CMD_DEF(SVGA_3D_CMD_DX_END_QUERY, &vmw_cmd_dx_cid_check, true, false, true), VMW_CMD_DEF(SVGA_3D_CMD_DX_READBACK_QUERY, &vmw_cmd_invalid, true, false, true), -- cgit v0.10.2 From 7851496a32319237456919575e5f4ba62f74cc7d Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Thu, 21 Apr 2016 11:29:31 -0700 Subject: drm/vmwgfx: Fix order of operation mode->hdisplay * (var->bits_per_pixel + 7) gets evaluated before the division, potentially making the pitch larger than it should be. Since the original intention is to do a div-round-up, just use the macro instead. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c index 3b1faf7..679a4cb 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c @@ -573,9 +573,9 @@ static int vmw_fb_set_par(struct fb_info *info) mode = old_mode; old_mode = NULL; } else if (!vmw_kms_validate_mode_vram(vmw_priv, - mode->hdisplay * - (var->bits_per_pixel + 7) / 8, - mode->vdisplay)) { + mode->hdisplay * + DIV_ROUND_UP(var->bits_per_pixel, 8), + mode->vdisplay)) { drm_mode_destroy(vmw_priv->dev, mode); return -EINVAL; } -- cgit v0.10.2 From 4c8bb95921e9ac01b9dd0c3abbaf6514ce88af92 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 24 Apr 2016 22:18:59 +0200 Subject: RDMA/nes: don't leak skb if carrier down Alternatively one could free the skb, OTOH I don't think this test is useful so just remove it. Cc: Signed-off-by: Florian Westphal Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index 3ea9e05..9291453 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -500,9 +500,6 @@ static int nes_netdev_start_xmit(struct sk_buff *skb, struct net_device *netdev) * skb_shinfo(skb)->nr_frags, skb_is_gso(skb)); */ - if (!netif_carrier_ok(netdev)) - return NETDEV_TX_OK; - if (netif_queue_stopped(netdev)) return NETDEV_TX_BUSY; -- cgit v0.10.2 From 8639a847b0e11f8d2daa3eafe15a9609c91fd357 Mon Sep 17 00:00:00 2001 From: Atsushi Kumagai Date: Thu, 28 Apr 2016 16:18:18 -0700 Subject: kexec: update VMCOREINFO for compound_order/dtor makedumpfile refers page.lru.next to get the order of compound pages for page filtering. However, now the order is stored in page.compound_order, hence VMCOREINFO should be updated to export the offset of page.compound_order. The fact is, page.compound_order was introduced already in kernel 4.0, but the offset of it was the same as page.lru.next until kernel 4.3, so this was not actual problem. The above can be said also for page.lru.prev and page.compound_dtor, it's necessary to detect hugetlbfs pages. Further, the content was changed from direct address to the ID which means dtor. The problem is that unnecessary hugepages won't be removed from a dump file in kernels 4.4.x and later. This means that extra disk space would be consumed. It's a problem, but not critical. Signed-off-by: Atsushi Kumagai Acked-by: Dave Young Cc: "Eric W. Biederman" Cc: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c index 8d34308..cbbb4c7 100644 --- a/kernel/kexec_core.c +++ b/kernel/kexec_core.c @@ -1415,6 +1415,8 @@ static int __init crash_save_vmcoreinfo_init(void) VMCOREINFO_OFFSET(page, lru); VMCOREINFO_OFFSET(page, _mapcount); VMCOREINFO_OFFSET(page, private); + VMCOREINFO_OFFSET(page, compound_dtor); + VMCOREINFO_OFFSET(page, compound_order); VMCOREINFO_OFFSET(pglist_data, node_zones); VMCOREINFO_OFFSET(pglist_data, nr_zones); #ifdef CONFIG_FLAT_NODE_MEM_MAP @@ -1447,8 +1449,8 @@ static int __init crash_save_vmcoreinfo_init(void) #ifdef CONFIG_X86 VMCOREINFO_NUMBER(KERNEL_IMAGE_SIZE); #endif -#ifdef CONFIG_HUGETLBFS - VMCOREINFO_SYMBOL(free_huge_page); +#ifdef CONFIG_HUGETLB_PAGE + VMCOREINFO_NUMBER(HUGETLB_PAGE_DTOR); #endif arch_crash_save_vmcoreinfo(); -- cgit v0.10.2 From d7f53518f713d3d9bf5ed150f943853fb94e7473 Mon Sep 17 00:00:00 2001 From: Atsushi Kumagai Date: Thu, 28 Apr 2016 16:18:21 -0700 Subject: kexec: export OFFSET(page.compound_head) to find out compound tail page PageAnon() always look at head page to check PAGE_MAPPING_ANON and tail page's page->mapping has just a poisoned data since commit 1c290f642101 ("mm: sanitize page->mapping for tail pages"). If makedumpfile checks page->mapping of a compound tail page to distinguish anonymous page as usual, it must fail in newer kernel. So it's necessary to export OFFSET(page.compound_head) to avoid checking compound tail pages. The problem is that unnecessary hugepages won't be removed from a dump file in kernels 4.5.x and later. This means that extra disk space would be consumed. It's a problem, but not critical. Signed-off-by: Atsushi Kumagai Acked-by: Dave Young Cc: "Eric W. Biederman" Cc: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c index cbbb4c7..1391d3e 100644 --- a/kernel/kexec_core.c +++ b/kernel/kexec_core.c @@ -1417,6 +1417,7 @@ static int __init crash_save_vmcoreinfo_init(void) VMCOREINFO_OFFSET(page, private); VMCOREINFO_OFFSET(page, compound_dtor); VMCOREINFO_OFFSET(page, compound_order); + VMCOREINFO_OFFSET(page, compound_head); VMCOREINFO_OFFSET(pglist_data, node_zones); VMCOREINFO_OFFSET(pglist_data, nr_zones); #ifdef CONFIG_FLAT_NODE_MEM_MAP -- cgit v0.10.2 From 66ee95d16a7f1b7b4f1dd74a2d81c6e19dc29a14 Mon Sep 17 00:00:00 2001 From: Steve Capper Date: Thu, 28 Apr 2016 16:18:24 -0700 Subject: mm: exclude HugeTLB pages from THP page_mapped() logic HugeTLB pages cannot be split, so we use the compound_mapcount to track rmaps. Currently page_mapped() will check the compound_mapcount, but will also go through the constituent pages of a THP compound page and query the individual _mapcount's too. Unfortunately, page_mapped() does not distinguish between HugeTLB and THP compound pages and assumes that a compound page always needs to have HPAGE_PMD_NR pages querying. For most cases when dealing with HugeTLB this is just inefficient, but for scenarios where the HugeTLB page size is less than the pmd block size (e.g. when using contiguous bit on ARM) this can lead to crashes. This patch adjusts the page_mapped function such that we skip the unnecessary THP reference checks for HugeTLB pages. Fixes: e1534ae95004 ("mm: differentiate page_mapped() from page_mapcount() for compound pages") Signed-off-by: Steve Capper Acked-by: Kirill A. Shutemov Cc: Will Deacon Cc: Catalin Marinas Cc: Michal Hocko Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/mm.h b/include/linux/mm.h index a55e5be..79b6c18 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1031,6 +1031,8 @@ static inline bool page_mapped(struct page *page) page = compound_head(page); if (atomic_read(compound_mapcount_ptr(page)) >= 0) return true; + if (PageHuge(page)) + return false; for (i = 0; i < hpage_nr_pages(page); i++) { if (atomic_read(&page[i]._mapcount) >= 0) return true; -- cgit v0.10.2 From aa88b68c3b1dce8bc3fd54c8a7372a777ff265cd Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 28 Apr 2016 16:18:27 -0700 Subject: thp: keep huge zero page pinned until tlb flush Andrea has found[1] a race condition on MMU-gather based TLB flush vs split_huge_page() or shrinker which frees huge zero under us (patch 1/2 and 2/2 respectively). With new THP refcounting, we don't need patch 1/2: mmu_gather keeps the page pinned until flush is complete and the pin prevents the page from being split under us. We still need patch 2/2. This is simplified version of Andrea's patch. We don't need fancy encoding. [1] http://lkml.kernel.org/r/1447938052-22165-1-git-send-email-aarcange@redhat.com Signed-off-by: Kirill A. Shutemov Reported-by: Andrea Arcangeli Reviewed-by: Andrea Arcangeli Cc: "Aneesh Kumar K.V" Cc: Mel Gorman Cc: Hugh Dickins Cc: Johannes Weiner Cc: Dave Hansen Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h index 7008623..d7b9e53 100644 --- a/include/linux/huge_mm.h +++ b/include/linux/huge_mm.h @@ -152,6 +152,7 @@ static inline bool is_huge_zero_pmd(pmd_t pmd) } struct page *get_huge_zero_page(void); +void put_huge_zero_page(void); #else /* CONFIG_TRANSPARENT_HUGEPAGE */ #define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; }) @@ -208,6 +209,10 @@ static inline bool is_huge_zero_page(struct page *page) return false; } +static inline void put_huge_zero_page(void) +{ + BUILD_BUG(); +} static inline struct page *follow_devmap_pmd(struct vm_area_struct *vma, unsigned long addr, pmd_t *pmd, int flags) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 86f9f8b..5346de0 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -232,7 +232,7 @@ retry: return READ_ONCE(huge_zero_page); } -static void put_huge_zero_page(void) +void put_huge_zero_page(void) { /* * Counter should never go to zero here. Only shrinker can put @@ -1684,12 +1684,12 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma, if (vma_is_dax(vma)) { spin_unlock(ptl); if (is_huge_zero_pmd(orig_pmd)) - put_huge_zero_page(); + tlb_remove_page(tlb, pmd_page(orig_pmd)); } else if (is_huge_zero_pmd(orig_pmd)) { pte_free(tlb->mm, pgtable_trans_huge_withdraw(tlb->mm, pmd)); atomic_long_dec(&tlb->mm->nr_ptes); spin_unlock(ptl); - put_huge_zero_page(); + tlb_remove_page(tlb, pmd_page(orig_pmd)); } else { struct page *page = pmd_page(orig_pmd); page_remove_rmap(page, true); diff --git a/mm/swap.c b/mm/swap.c index a0bc206..03aacbc 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -728,6 +728,11 @@ void release_pages(struct page **pages, int nr, bool cold) zone = NULL; } + if (is_huge_zero_page(page)) { + put_huge_zero_page(); + continue; + } + page = compound_head(page); if (!put_page_testzero(page)) continue; -- cgit v0.10.2 From 314e9b75b3f673a61ecbf0bba401830bc7dfe121 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 28 Apr 2016 16:18:30 -0700 Subject: mailmap: fix Krzysztof Kozlowski's misspelled name Patchwork introduced a garbled Polish character in commit 1e3012d0fdc5 ("crypto: s5p-sss - Use memcpy_toio for iomem annotated memory") so fix the mail mapping. Additionally prefer to use kernel.org account for personal work, instead of my gmail address. Signed-off-by: Krzysztof Kozlowski Cc: Herbert Xu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/.mailmap b/.mailmap index 90c0aef..c45e71f 100644 --- a/.mailmap +++ b/.mailmap @@ -79,6 +79,7 @@ Kay Sievers Kenneth W Chen Konstantin Khlebnikov Koushik +Krzysztof Kozlowski Kuninori Morimoto Leonid I Ananiev Linas Vepstas -- cgit v0.10.2 From 3486b85a29c1741db99d0c522211c82d2b7a56d0 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 28 Apr 2016 16:18:32 -0700 Subject: mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check Khugepaged detects own VMAs by checking vm_file and vm_ops but this way it cannot distinguish private /dev/zero mappings from other special mappings like /dev/hpet which has no vm_ops and popultes PTEs in mmap. This fixes false-positive VM_BUG_ON and prevents installing THP where they are not expected. Link: http://lkml.kernel.org/r/CACT4Y+ZmuZMV5CjSFOeXviwQdABAgT7T+StKfTqan9YDtgEi5g@mail.gmail.com Fixes: 78f11a255749 ("mm: thp: fix /dev/zero MAP_PRIVATE and vm_flags cleanups") Signed-off-by: Konstantin Khlebnikov Reported-by: Dmitry Vyukov Acked-by: Vlastimil Babka Acked-by: Kirill A. Shutemov Cc: Dmitry Vyukov Cc: Andrea Arcangeli Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 5346de0..df67b53 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1960,10 +1960,9 @@ int khugepaged_enter_vma_merge(struct vm_area_struct *vma, * page fault if needed. */ return 0; - if (vma->vm_ops) + if (vma->vm_ops || (vm_flags & VM_NO_THP)) /* khugepaged not yet working on file or special mappings */ return 0; - VM_BUG_ON_VMA(vm_flags & VM_NO_THP, vma); hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK; hend = vma->vm_end & HPAGE_PMD_MASK; if (hstart < hend) @@ -2352,8 +2351,7 @@ static bool hugepage_vma_check(struct vm_area_struct *vma) return false; if (is_vma_temporary_stack(vma)) return false; - VM_BUG_ON_VMA(vma->vm_flags & VM_NO_THP, vma); - return true; + return !(vma->vm_flags & VM_NO_THP); } static void collapse_huge_page(struct mm_struct *mm, -- cgit v0.10.2 From 28093f9f34cedeaea0f481c58446d9dac6dd620f Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 28 Apr 2016 16:18:35 -0700 Subject: numa: fix /proc//numa_maps for THP In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by: Gerald Schaefer Cc: Naoya Horiguchi Cc: "Kirill A . Shutemov" Cc: Konstantin Khlebnikov Cc: Michal Hocko Cc: Vlastimil Babka Cc: Jerome Marchand Cc: Johannes Weiner Cc: Dave Hansen Cc: Mel Gorman Cc: Dan Williams Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Michael Holzheu Cc: [4.3+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 229cb54..5415835 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -1518,6 +1518,32 @@ static struct page *can_gather_numa_stats(pte_t pte, struct vm_area_struct *vma, return page; } +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +static struct page *can_gather_numa_stats_pmd(pmd_t pmd, + struct vm_area_struct *vma, + unsigned long addr) +{ + struct page *page; + int nid; + + if (!pmd_present(pmd)) + return NULL; + + page = vm_normal_page_pmd(vma, addr, pmd); + if (!page) + return NULL; + + if (PageReserved(page)) + return NULL; + + nid = page_to_nid(page); + if (!node_isset(nid, node_states[N_MEMORY])) + return NULL; + + return page; +} +#endif + static int gather_pte_stats(pmd_t *pmd, unsigned long addr, unsigned long end, struct mm_walk *walk) { @@ -1527,14 +1553,14 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr, pte_t *orig_pte; pte_t *pte; +#ifdef CONFIG_TRANSPARENT_HUGEPAGE ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) { - pte_t huge_pte = *(pte_t *)pmd; struct page *page; - page = can_gather_numa_stats(huge_pte, vma, addr); + page = can_gather_numa_stats_pmd(*pmd, vma, addr); if (page) - gather_stats(page, md, pte_dirty(huge_pte), + gather_stats(page, md, pmd_dirty(*pmd), HPAGE_PMD_SIZE/PAGE_SIZE); spin_unlock(ptl); return 0; @@ -1542,6 +1568,7 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr, if (pmd_trans_unstable(pmd)) return 0; +#endif orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl); do { struct page *page = can_gather_numa_stats(*pte, vma, addr); diff --git a/include/linux/mm.h b/include/linux/mm.h index 79b6c18..864d722 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1140,6 +1140,8 @@ struct zap_details { struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr, pte_t pte); +struct page *vm_normal_page_pmd(struct vm_area_struct *vma, unsigned long addr, + pmd_t pmd); int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address, unsigned long size); diff --git a/mm/memory.c b/mm/memory.c index 93897f2..305537f 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -789,6 +789,46 @@ out: return pfn_to_page(pfn); } +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +struct page *vm_normal_page_pmd(struct vm_area_struct *vma, unsigned long addr, + pmd_t pmd) +{ + unsigned long pfn = pmd_pfn(pmd); + + /* + * There is no pmd_special() but there may be special pmds, e.g. + * in a direct-access (dax) mapping, so let's just replicate the + * !HAVE_PTE_SPECIAL case from vm_normal_page() here. + */ + if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { + if (vma->vm_flags & VM_MIXEDMAP) { + if (!pfn_valid(pfn)) + return NULL; + goto out; + } else { + unsigned long off; + off = (addr - vma->vm_start) >> PAGE_SHIFT; + if (pfn == vma->vm_pgoff + off) + return NULL; + if (!is_cow_mapping(vma->vm_flags)) + return NULL; + } + } + + if (is_zero_pfn(pfn)) + return NULL; + if (unlikely(pfn > highest_memmap_pfn)) + return NULL; + + /* + * NOTE! We still have PageReserved() pages in the page tables. + * eg. VDSO mappings can cause them to exist. + */ +out: + return pfn_to_page(pfn); +} +#endif + /* * copy one vm_area from one task to the other. Assumes the page tables * already present in the new task to be cleared in the whole range -- cgit v0.10.2 From 7bf52fb891b64b8d61caf0b82060adb9db761aec Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Thu, 28 Apr 2016 16:18:38 -0700 Subject: mm: vmscan: reclaim highmem zone if buffer_heads is over limit We have been reclaimed highmem zone if buffer_heads is over limit but commit 6b4f7799c6a5 ("mm: vmscan: invoke slab shrinkers from shrink_zone()") changed the behavior so it doesn't reclaim highmem zone although buffer_heads is over the limit. This patch restores the logic. Fixes: 6b4f7799c6a5 ("mm: vmscan: invoke slab shrinkers from shrink_zone()") Signed-off-by: Minchan Kim Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index b934223e..c638b28 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2553,7 +2553,7 @@ static bool shrink_zones(struct zonelist *zonelist, struct scan_control *sc) sc->gfp_mask |= __GFP_HIGHMEM; for_each_zone_zonelist_nodemask(zone, z, zonelist, - requested_highidx, sc->nodemask) { + gfp_zone(sc->gfp_mask), sc->nodemask) { enum zone_type classzone_idx; if (!populated_zone(zone)) -- cgit v0.10.2 From b06bad17c7435b600a1d7a35b56eff25e1d3dbc0 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Thu, 28 Apr 2016 16:18:41 -0700 Subject: mm: call swap_slot_free_notify() with page lock held Kyeongdon reported below error which is BUG_ON(!PageSwapCache(page)) in page_swap_info. The reason is that page_endio in rw_page unlocks the page if read I/O is completed so we need to hold a PG_lock again to check PageSwapCache. Otherwise, the page can be removed from swapcache. Kernel BUG at c00f9040 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 4 PID: 13446 Comm: RenderThread Tainted: G W 3.10.84-g9f14aec-dirty #73 task: c3b73200 ti: dd192000 task.ti: dd192000 PC is at page_swap_info+0x10/0x2c LR is at swap_slot_free_notify+0x18/0x6c pc : [] lr : [] psr: 400f0113 sp : dd193d78 ip : c2deb1e4 fp : da015180 r10: 00000000 r9 : 000200da r8 : c120fe08 r7 : 00000000 r6 : 00000000 r5 : c249a6c0 r4 : = c249a6c0 r3 : 00000000 r2 : 40080009 r1 : 200f0113 r0 : = c249a6c0 .. .. Call Trace: page_swap_info+0x10/0x2c swap_slot_free_notify+0x18/0x6c swap_readpage+0x90/0x11c read_swap_cache_async+0x134/0x1ac swapin_readahead+0x70/0xb0 handle_pte_fault+0x320/0x6fc handle_mm_fault+0xc0/0xf0 do_page_fault+0x11c/0x36c do_DataAbort+0x34/0x118 Fixes: 3f2b1a04f44933f2 ("zram: revive swap_slot_free_notify") Signed-off-by: Minchan Kim Tested-by: Kyeongdon Kim Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_io.c b/mm/page_io.c index cd92e3d..985f23c 100644 --- a/mm/page_io.c +++ b/mm/page_io.c @@ -353,7 +353,11 @@ int swap_readpage(struct page *page) ret = bdev_read_page(sis->bdev, swap_page_sector(page), page); if (!ret) { - swap_slot_free_notify(page); + if (trylock_page(page)) { + swap_slot_free_notify(page); + unlock_page(page); + } + count_vm_event(PSWPIN); return 0; } -- cgit v0.10.2 From d7e69488bd04de165667f6bc741c1c0ec6042ab9 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Thu, 28 Apr 2016 16:18:44 -0700 Subject: mm/hwpoison: fix wrong num_poisoned_pages accounting Currently, migration code increses num_poisoned_pages on *failed* migration page as well as successfully migrated one at the trial of memory-failure. It will make the stat wrong. As well, it marks the page as PG_HWPoison even if the migration trial failed. It would mean we cannot recover the corrupted page using memory-failure facility. This patches fixes it. Signed-off-by: Minchan Kim Reported-by: Vlastimil Babka Acked-by: Naoya Horiguchi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/migrate.c b/mm/migrate.c index 6c822a7..f9dfb18 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -975,7 +975,13 @@ out: dec_zone_page_state(page, NR_ISOLATED_ANON + page_is_file_cache(page)); /* Soft-offlined page shouldn't go through lru cache list */ - if (reason == MR_MEMORY_FAILURE) { + if (reason == MR_MEMORY_FAILURE && rc == MIGRATEPAGE_SUCCESS) { + /* + * With this release, we free successfully migrated + * page and set PG_HWPoison on just freed page + * intentionally. Although it's rather weird, it's how + * HWPoison flag works at the moment. + */ put_page(page); if (!test_set_page_hwpoison(page)) num_poisoned_pages_inc(); -- cgit v0.10.2 From eeb68d1d2d48b5bfe9d79d8eac35df576bb79a99 Mon Sep 17 00:00:00 2001 From: Frank Rowand Date: Thu, 28 Apr 2016 16:18:47 -0700 Subject: .mailmap: add Frank Rowand Set current email address to replace obsolete email addresses. Signed-off-by: Frank Rowand Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/.mailmap b/.mailmap index c45e71f..c156a8b 100644 --- a/.mailmap +++ b/.mailmap @@ -48,6 +48,9 @@ Felix Kuhling Felix Moeller Filipe Lautert Franck Bui-Huu +Frank Rowand +Frank Rowand +Frank Rowand Frank Zago Greg Kroah-Hartman Greg Kroah-Hartman -- cgit v0.10.2 From fd901c95388b3bd5a6f749ed1d677a672b992298 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 28 Apr 2016 16:18:49 -0700 Subject: mm: wake kcompactd before kswapd's short sleep When kswapd goes to sleep it checks if the node is balanced and at first it sleeps only for HZ/10 time, then rechecks if the node is still balanced and nobody has woken it during the initial sleep. Only then it goes fully sleep until an allocation slowpath wakes it up again. For higher-order allocations, waking up kcompactd is done only before the full sleep. This turns out to be an issue in case another high-order allocation fails during the initial sleep. It will wake kswapd up, however kswapd considers the zone balanced from the order-0 perspective, and will just quickly try to sleep again. So if there's a longer stream of high-order allocations hitting the slowpath and waking up kswapd, it might never actually wake up kcompactd, which may be considered a regression from kswapd-based compaction. In the worst case, it might be that a single allocation that cannot direct reclaim/compact itself is waking kswapd in the retry loop and preventing kcompactd from being woken up and unblocking it. This patch makes sure kcompactd is woken up in such situations by simply moving the wakeup before the short initial sleep. More efficient solution would be to wake kcompactd immediately instead of kswapd if the node is already order-0 balanced, but in that case we should also move reset_isolation_suitable() call to kcompactd so it's not adding to the allocator's latency. Since it's late in the 4.6 cycle, let's go with the simpler change for now. Fixes: accf62422b3a ("mm, kswapd: replace kswapd compaction with waking up kcompactd") Signed-off-by: Vlastimil Babka Cc: Andrea Arcangeli Cc: "Kirill A. Shutemov" Cc: Rik van Riel Cc: Joonsoo Kim Cc: Mel Gorman Cc: David Rientjes Cc: Michal Hocko Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index c638b28..142cb61 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -3318,6 +3318,20 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order, /* Try to sleep for a short interval */ if (prepare_kswapd_sleep(pgdat, order, remaining, balanced_classzone_idx)) { + /* + * Compaction records what page blocks it recently failed to + * isolate pages from and skips them in the future scanning. + * When kswapd is going to sleep, it is reasonable to assume + * that pages and compaction may succeed so reset the cache. + */ + reset_isolation_suitable(pgdat); + + /* + * We have freed the memory, now we should compact it to make + * allocation of the requested order possible. + */ + wakeup_kcompactd(pgdat, order, classzone_idx); + remaining = schedule_timeout(HZ/10); finish_wait(&pgdat->kswapd_wait, &wait); prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE); @@ -3341,20 +3355,6 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order, */ set_pgdat_percpu_threshold(pgdat, calculate_normal_threshold); - /* - * Compaction records what page blocks it recently failed to - * isolate pages from and skips them in the future scanning. - * When kswapd is going to sleep, it is reasonable to assume - * that pages and compaction may succeed so reset the cache. - */ - reset_isolation_suitable(pgdat); - - /* - * We have freed the memory, now we should compact it to make - * allocation of the requested order possible. - */ - wakeup_kcompactd(pgdat, order, classzone_idx); - if (!kthread_should_stop()) schedule(); -- cgit v0.10.2 From bdab42dfc974d15303afbf259f340f374a453974 Mon Sep 17 00:00:00 2001 From: James Morse Date: Thu, 28 Apr 2016 16:18:52 -0700 Subject: kcov: don't trace the code coverage code Kcov causes the compiler to add a call to __sanitizer_cov_trace_pc() in every basic block. Ftrace patches in a call to _mcount() to each function it has annotated. Letting these mechanisms annotate each other is a bad thing. Break the loop by adding 'notrace' to __sanitizer_cov_trace_pc() so that ftrace won't try to patch this code. This patch lets arm64 with KCOV and STACK_TRACER boot. Signed-off-by: James Morse Acked-by: Dmitry Vyukov Cc: Alexander Potapenko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kcov.c b/kernel/kcov.c index 3efbee0..78bed71 100644 --- a/kernel/kcov.c +++ b/kernel/kcov.c @@ -43,7 +43,7 @@ struct kcov { * Entry point from instrumented code. * This is called once per basic-block/edge. */ -void __sanitizer_cov_trace_pc(void) +void notrace __sanitizer_cov_trace_pc(void) { struct task_struct *t; enum kcov_mode mode; -- cgit v0.10.2 From 36f05ae8bce904b4c8105363e6227a79d343bda6 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Thu, 28 Apr 2016 16:18:55 -0700 Subject: kcov: don't profile branches in kcov Profiling 'if' statements in __sanitizer_cov_trace_pc() leads to unbound recursion and crash: __sanitizer_cov_trace_pc() -> ftrace_likely_update -> __sanitizer_cov_trace_pc() ... Define DISABLE_BRANCH_PROFILING to disable this tracer. Signed-off-by: Andrey Ryabinin Cc: Dmitry Vyukov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kcov.c b/kernel/kcov.c index 78bed71..a02f2dd 100644 --- a/kernel/kcov.c +++ b/kernel/kcov.c @@ -1,5 +1,6 @@ #define pr_fmt(fmt) "kcov: " fmt +#define DISABLE_BRANCH_PROFILING #include #include #include -- cgit v0.10.2 From a320817c68e3fa1fc3ddaa709a1ad45cf533693b Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Thu, 28 Apr 2016 16:18:58 -0700 Subject: Ananth has moved The current ID is going away soon... update email address Signed-off-by: Ananth N Mavinakayanahalli Cc: Masami Hiramatsu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 8491336..7f72d54 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6400,7 +6400,7 @@ F: mm/kmemleak.c F: mm/kmemleak-test.c KPROBES -M: Ananth N Mavinakayanahalli +M: Ananth N Mavinakayanahalli M: Anil S Keshavamurthy M: "David S. Miller" M: Masami Hiramatsu -- cgit v0.10.2 From b73413647ee36406561618f68d0661d49dc47489 Mon Sep 17 00:00:00 2001 From: xuejiufei Date: Thu, 28 Apr 2016 16:19:01 -0700 Subject: ocfs2/dlm: return zero if deref_done message is successfully handled dlm_deref_lockres_done_handler() should return zero if the message is successfully handled. Fixes: 60d663cb5273 ("ocfs2/dlm: add DEREF_DONE message"). Signed-off-by: xuejiufei Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 9aed6e2..13719d3 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -2455,6 +2455,8 @@ int dlm_deref_lockres_done_handler(struct o2net_msg *msg, u32 len, void *data, spin_unlock(&dlm->spinlock); + ret = 0; + done: dlm_put(dlm); return ret; -- cgit v0.10.2 From c2e7e00b715d3c65f301bec8559d6af4ef8098ab Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 28 Apr 2016 16:19:03 -0700 Subject: mm/memory-failure: fix race with compound page split/merge get_hwpoison_page() must recheck relation between head and tail pages. n-horiguchi said: without this recheck, the race causes kernel to pin an irrelevant page, and finally makes kernel crash for refcount mismatch. Signed-off-by: Konstantin Khlebnikov Acked-by: Naoya Horiguchi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 78f5f26..ca5acee 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -888,7 +888,15 @@ int get_hwpoison_page(struct page *page) } } - return get_page_unless_zero(head); + if (get_page_unless_zero(head)) { + if (head == compound_head(page)) + return 1; + + pr_info("MCE: %#lx cannot catch tail\n", page_to_pfn(page)); + put_page(head); + } + + return 0; } EXPORT_SYMBOL_GPL(get_hwpoison_page); -- cgit v0.10.2 From 99f23c2cded85a377325aa9fd374ffa3d55d1088 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 28 Apr 2016 16:19:06 -0700 Subject: rapidio: fix potential NULL pointer dereference The change fixes improper check for a returned error value by class_create() function, which on error returns ERR_PTR() value, thus the original check always results in a dead code on error path. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Alexandre Bounine Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c index 5d4d918..96168b8 100644 --- a/drivers/rapidio/devices/rio_mport_cdev.c +++ b/drivers/rapidio/devices/rio_mport_cdev.c @@ -2669,9 +2669,9 @@ static int __init mport_init(void) /* Create device class needed by udev */ dev_class = class_create(THIS_MODULE, DRV_NAME); - if (!dev_class) { + if (IS_ERR(dev_class)) { rmcd_error("Unable to create " DRV_NAME " class"); - return -EINVAL; + return PTR_ERR(dev_class); } ret = alloc_chrdev_region(&dev_number, 0, RIO_MAX_MPORTS, DRV_NAME); -- cgit v0.10.2 From 33334e25769c6ad69b983379578f42581d99a2f9 Mon Sep 17 00:00:00 2001 From: Alexander Potapenko Date: Thu, 28 Apr 2016 16:19:09 -0700 Subject: lib/stackdepot.c: allow the stack trace hash to be zero Do not bail out from depot_save_stack() if the stack trace has zero hash. Initially depot_save_stack() silently dropped stack traces with zero hashes, however there's actually no point in reserving this zero value. Reported-by: Joonsoo Kim Signed-off-by: Alexander Potapenko Acked-by: Andrey Ryabinin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/stackdepot.c b/lib/stackdepot.c index 654c9d8..9e0b031 100644 --- a/lib/stackdepot.c +++ b/lib/stackdepot.c @@ -210,10 +210,6 @@ depot_stack_handle_t depot_save_stack(struct stack_trace *trace, goto fast_exit; hash = hash_stack(trace->entries, trace->nr_entries); - /* Bad luck, we won't store this stack. */ - if (hash == 0) - goto exit; - bucket = &stack_table[hash & STACK_HASH_MASK]; /* -- cgit v0.10.2 From 7c88a292dfcd6979e839493ef18d04770eb3bad0 Mon Sep 17 00:00:00 2001 From: Xishi Qiu Date: Thu, 28 Apr 2016 16:19:11 -0700 Subject: Documentation/sysctl/vm.txt: update numa_zonelist_order description Commit 3193913ce62c ("mm: page_alloc: default node-ordering on 64-bit NUMA, zone-ordering on 32-bit") changes the default value of numa_zonelist_order. Update the document. Signed-off-by: Xishi Qiu Cc: Mel Gorman Cc: Johannes Weiner Cc: Rik van Riel Cc: David Rientjes Cc: Kamezawa Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index cb03684..34a5fec 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -581,15 +581,16 @@ Specify "[Nn]ode" for node order "Zone Order" orders the zonelists by zone type, then by node within each zone. Specify "[Zz]one" for zone order. -Specify "[Dd]efault" to request automatic configuration. Autoconfiguration -will select "node" order in following case. -(1) if the DMA zone does not exist or -(2) if the DMA zone comprises greater than 50% of the available memory or -(3) if any node's DMA zone comprises greater than 70% of its local memory and - the amount of local memory is big enough. - -Otherwise, "zone" order will be selected. Default order is recommended unless -this is causing problems for your system/application. +Specify "[Dd]efault" to request automatic configuration. + +On 32-bit, the Normal zone needs to be preserved for allocations accessible +by the kernel, so "zone" order will be selected. + +On 64-bit, devices that require DMA32/DMA are relatively rare, so "node" +order will be selected. + +Default order is recommended unless this is causing problems for your +system/application. ============================================================== -- cgit v0.10.2 From c4fc1956fa31003bfbe4f597e359d751568e2954 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 29 Apr 2016 15:42:25 +0200 Subject: EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck Acked-by: Aristeu Rozanski Acked-by: Mauro Carvalho Chehab Cc: linux-edac Cc: Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 01087a3..792bdae 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -1866,7 +1866,7 @@ static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val, i7_dev = get_i7core_dev(mce->socketid); if (!i7_dev) - return NOTIFY_BAD; + return NOTIFY_DONE; mci = i7_dev->mci; pvt = mci->pvt_info; diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 468447a..8bf745d 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -3168,7 +3168,7 @@ static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val, mci = get_mci_for_node_id(mce->socketid); if (!mci) - return NOTIFY_BAD; + return NOTIFY_DONE; pvt = mci->pvt_info; /* -- cgit v0.10.2 From 04974df8049fc4240d22759a91e035082ccd18b4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 1 May 2016 15:52:31 -0700 Subject: Linux 4.6-rc6 diff --git a/Makefile b/Makefile index 9496df8..7466de6 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 4 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc5 -NAME = Blurry Fish Butt +EXTRAVERSION = -rc6 +NAME = Charred Weasel # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v0.10.2 From cba1b3798e2c4c094f2079a0d4c1ba4ec2c5a9ac Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 29 Apr 2016 17:55:48 -0700 Subject: perf/x86: Add model numbers for Kabylake CPUs Everything the same as Skylake, just new model numbers. Signed-off-by: Andi Kleen Signed-off-by: Peter Zijlstra (Intel) Link: http://lkml.kernel.org/r/1461977748-17616-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index aff7988..a6fd4db 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -3637,6 +3637,8 @@ __init int intel_pmu_init(void) pr_cont("Knights Landing events, "); break; + case 142: /* 14nm Kabylake Mobile */ + case 158: /* 14nm Kabylake Desktop */ case 78: /* 14nm Skylake Mobile */ case 94: /* 14nm Skylake Desktop */ case 85: /* 14nm Skylake Server */ -- cgit v0.10.2 From 8482716b9d865db34c55d4bf2fed19498e7195b9 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 24 Apr 2016 00:42:55 +0200 Subject: perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs The new sanity check introduced by: 26657848502b ("perf/core: Verify we have a single perf_hw_context PMU") ... triggered on the AMD IOMMU driver. IOMMUs are not per logical CPU, they cannot have per-task counters. Fix it. Reported-by: Borislav Petkov Tested-by: Borislav Petkov Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: jroedel@suse.de Cc: suravee.suthikulpanit@amd.com Link: http://lkml.kernel.org/r/20160423224255.GB3430@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar diff --git a/arch/x86/events/amd/iommu.c b/arch/x86/events/amd/iommu.c index 40625ca..6011a57 100644 --- a/arch/x86/events/amd/iommu.c +++ b/arch/x86/events/amd/iommu.c @@ -474,6 +474,7 @@ static __init int _init_perf_amd_iommu( static struct perf_amd_iommu __perf_iommu = { .pmu = { + .task_ctx_nr = perf_invalid_context, .event_init = perf_iommu_event_init, .add = perf_iommu_add, .del = perf_iommu_del, -- cgit v0.10.2