From 1c762ca438447fa3525d84f4a0784a2021a66200 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:42 +0000 Subject: thinkpad-acpi: update copyright notices It is that time of the year again... Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index d243320..792d22e 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -3,7 +3,7 @@ * * * Copyright (C) 2004-2005 Borislav Deianov - * Copyright (C) 2006-2008 Henrique de Moraes Holschuh + * Copyright (C) 2006-2009 Henrique de Moraes Holschuh * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v0.10.2 From 257bc1cb3e29c8da62b9c9e0a4505011776c7040 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:43 +0000 Subject: thinkpad-acpi: drop ibm-acpi alias The driver was renamed two years ago, on 2.6.21. Drop the old compatibility alias, we have given everybody quite enough time to update their configs to the new name. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 792d22e..c83ec94 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7517,9 +7517,6 @@ static int __init thinkpad_acpi_module_init(void) return 0; } -/* Please remove this in year 2009 */ -MODULE_ALIAS("ibm_acpi"); - MODULE_ALIAS(TPACPI_DRVR_SHORTNAME); /* -- cgit v0.10.2 From 078ac19ed8f476a7c2d729712e15f5ab516ff491 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:44 +0000 Subject: thinkpad-acpi: documentation cleanup Some cleanups to the documentation of the driver. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 41bc99f..f6e6bc6 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -20,7 +20,8 @@ moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel kernel 2.6.29 and release 0.22. The driver is named "thinkpad-acpi". In some places, like module -names, "thinkpad_acpi" is used because of userspace issues. +names and log messages, "thinkpad_acpi" is used because of userspace +issues. "tpacpi" is used as a shorthand where "thinkpad-acpi" would be too long due to length limitations on some Linux kernel versions. @@ -37,7 +38,7 @@ detailed description): - ThinkLight on and off - limited docking and undocking - UltraBay eject - - CMOS control + - CMOS/UCMS control - LED control - ACPI sounds - temperature sensors @@ -46,6 +47,7 @@ detailed description): - Volume control - Fan control and monitoring: fan speed, fan enable/disable - WAN enable and disable + - UWB enable and disable A compatibility table by model and feature is maintained on the web site, http://ibm-acpi.sf.net/. I appreciate any success or failure @@ -53,7 +55,7 @@ reports, especially if they add to or correct the compatibility table. Please include the following information in your report: - ThinkPad model name - - a copy of your DSDT, from /proc/acpi/dsdt + - a copy of your ACPI tables, using the "acpidump" utility - a copy of the output of dmidecode, with serial numbers and UUIDs masked off - which driver features work and which don't @@ -66,17 +68,18 @@ Installation ------------ If you are compiling this driver as included in the Linux kernel -sources, simply enable the CONFIG_THINKPAD_ACPI option, and optionally -enable the CONFIG_THINKPAD_ACPI_BAY option if you want the -thinkpad-specific bay functionality. +sources, look for the CONFIG_THINKPAD_ACPI Kconfig option. +It is located on the menu path: "Device Drivers" -> "X86 Platform +Specific Device Drivers" -> "ThinkPad ACPI Laptop Extras". + Features -------- The driver exports two different interfaces to userspace, which can be used to access the features it provides. One is a legacy procfs-based -interface, which will be removed at some time in the distant future. -The other is a new sysfs-based interface which is not complete yet. +interface, which will be removed at some time in the future. The other +is a new sysfs-based interface which is not complete yet. The procfs interface creates the /proc/acpi/ibm directory. There is a file under that directory for each feature it supports. The procfs @@ -111,15 +114,17 @@ The version of thinkpad-acpi's sysfs interface is exported by the driver as a driver attribute (see below). Sysfs driver attributes are on the driver's sysfs attribute space, -for 2.6.23 this is /sys/bus/platform/drivers/thinkpad_acpi/ and +for 2.6.23+ this is /sys/bus/platform/drivers/thinkpad_acpi/ and /sys/bus/platform/drivers/thinkpad_hwmon/ Sysfs device attributes are on the thinkpad_acpi device sysfs attribute -space, for 2.6.23 this is /sys/devices/platform/thinkpad_acpi/. +space, for 2.6.23+ this is /sys/devices/platform/thinkpad_acpi/. Sysfs device attributes for the sensors and fan are on the thinkpad_hwmon device's sysfs attribute space, but you should locate it -looking for a hwmon device with the name attribute of "thinkpad". +looking for a hwmon device with the name attribute of "thinkpad", or +better yet, through libsensors. + Driver version -------------- @@ -129,6 +134,7 @@ sysfs driver attribute: version The driver name and version. No commands can be written to this file. + Sysfs interface version ----------------------- @@ -160,6 +166,7 @@ expect that an attribute might not be there, and deal with it properly (an attribute not being there *is* a valid way to make it clear that a feature is not available in sysfs). + Hot keys -------- @@ -618,6 +625,7 @@ For Lenovo models *with* ACPI backlight control: and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process these keys on userspace somehow (e.g. by calling xbacklight). + Bluetooth --------- @@ -628,6 +636,9 @@ sysfs rfkill class: switch "tpacpi_bluetooth_sw" This feature shows the presence and current state of a ThinkPad Bluetooth device in the internal ThinkPad CDC slot. +If the ThinkPad supports it, the Bluetooth state is stored in NVRAM, +so it is kept across reboots and power-off. + Procfs notes: If Bluetooth is installed, the following commands can be used: @@ -652,6 +663,7 @@ Sysfs notes: rfkill controller switch "tpacpi_bluetooth_sw": refer to Documentation/rfkill.txt for details. + Video output control -- /proc/acpi/ibm/video -------------------------------------------- @@ -693,11 +705,8 @@ Fn-F7 from working. This also disables the video output switching features of this driver, as it uses the same ACPI methods as Fn-F7. Video switching on the console should still work. -UPDATE: There's now a patch for the X.org Radeon driver which -addresses this issue. Some people are reporting success with the patch -while others are still having problems. For more information: +UPDATE: refer to https://bugs.freedesktop.org/show_bug.cgi?id=2000 -https://bugs.freedesktop.org/show_bug.cgi?id=2000 ThinkLight control ------------------ @@ -720,10 +729,11 @@ The ThinkLight sysfs interface is documented by the LED class documentation, in Documentation/leds-class.txt. The ThinkLight LED name is "tpacpi::thinklight". -Due to limitations in the sysfs LED class, if the status of the thinklight +Due to limitations in the sysfs LED class, if the status of the ThinkLight cannot be read or if it is unknown, thinkpad-acpi will report it as "off". It is impossible to know if the status returned through sysfs is valid. + Docking / undocking -- /proc/acpi/ibm/dock ------------------------------------------ @@ -784,6 +794,7 @@ the only docking stations currently supported are the X-series UltraBase docks and "dumb" port replicators like the Mini Dock (the latter don't need any ACPI support, actually). + UltraBay eject -- /proc/acpi/ibm/bay ------------------------------------ @@ -847,8 +858,9 @@ supported. Use "eject2" instead of "eject" for the second bay. Note: the UltraBay eject support on the 600e/x, A22p and A3x is EXPERIMENTAL and may not work as expected. USE WITH CAUTION! -CMOS control ------------- + +CMOS/UCMS control +----------------- procfs: /proc/acpi/ibm/cmos sysfs device attribute: cmos_command @@ -882,6 +894,7 @@ The cmos command interface is prone to firmware split-brain problems, as in newer ThinkPads it is just a compatibility layer. Do not use it, it is exported just as a debug tool. + LED control ----------- @@ -939,6 +952,7 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the "timer" trigger, and leave the delay_on and delay_off parameters set to zero (to request hardware acceleration autodetection). + ACPI sounds -- /proc/acpi/ibm/beep ---------------------------------- @@ -968,6 +982,7 @@ X40: 16 - one medium-pitched beep repeating constantly, stop with 17 17 - stop 16 + Temperature sensors ------------------- @@ -1115,6 +1130,7 @@ registers contain the current battery capacity, etc. If you experiment with this, do send me your results (including some complete dumps with a description of the conditions when they were taken.) + LCD brightness control ---------------------- @@ -1124,10 +1140,9 @@ sysfs backlight device "thinkpad_screen" This feature allows software control of the LCD brightness on ThinkPad models which don't have a hardware brightness slider. -It has some limitations: the LCD backlight cannot be actually turned on or -off by this interface, and in many ThinkPad models, the "dim while on -battery" functionality will be enabled by the BIOS when this interface is -used, and cannot be controlled. +It has some limitations: the LCD backlight cannot be actually turned +on or off by this interface, it just controls the backlight brightness +level. On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control has eight brightness levels, ranging from 0 to 7. Some of the levels @@ -1201,6 +1216,7 @@ WARNING: and maybe reduce the life of the backlight lamps by needlessly kicking its level up and down at every change. + Volume control -- /proc/acpi/ibm/volume --------------------------------------- @@ -1217,6 +1233,11 @@ distinct. The unmute the volume after the mute command, use either the up or down command (the level command will not unmute the volume). The current volume level and mute state is shown in the file. +The ALSA mixer interface to this feature is still missing, but patches +to add it exist. That problem should be addressed in the not so +distant future. + + Fan control and monitoring: fan speed, fan enable/disable --------------------------------------------------------- @@ -1383,8 +1404,11 @@ procfs: /proc/acpi/ibm/wan sysfs device attribute: wwan_enable (deprecated) sysfs rfkill class: switch "tpacpi_wwan_sw" -This feature shows the presence and current state of a W-WAN (Sierra -Wireless EV-DO) device. +This feature shows the presence and current state of the built-in +Wireless WAN device. + +If the ThinkPad supports it, the WWAN state is stored in NVRAM, +so it is kept across reboots and power-off. It was tested on a Lenovo ThinkPad X60. It should probably work on other ThinkPad models which come with this module installed. @@ -1413,6 +1437,7 @@ Sysfs notes: rfkill controller switch "tpacpi_wwan_sw": refer to Documentation/rfkill.txt for details. + EXPERIMENTAL: UWB ----------------- @@ -1431,6 +1456,7 @@ Sysfs notes: rfkill controller switch "tpacpi_uwb_sw": refer to Documentation/rfkill.txt for details. + Multiple Commands, Module Parameters ------------------------------------ @@ -1445,6 +1471,7 @@ for example: modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable + Enabling debugging output ------------------------- @@ -1467,6 +1494,7 @@ The level of debugging information output by the driver can be changed at runtime through sysfs, using the driver attribute debug_level. The attribute takes the same bitmask as the debug module parameter above. + Force loading of module ----------------------- -- cgit v0.10.2 From 3dcc2c3b00cad01a0e3667607f8644e891e4dc8b Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:45 +0000 Subject: thinkpad-acpi: cleanup debug helpers Fix the vdbg_printk macro definition to be sane when CONFIG_THINKPAD_ACPI_DEBUG is undefined, and move the mess into a file section of its own. This doesn't change anything in the current code, but future code will need the proper behaviour. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index c83ec94..3367df9 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -184,17 +184,6 @@ enum { #define TPACPI_DBG_ALL 0xffff #define TPACPI_DBG_INIT 0x0001 #define TPACPI_DBG_EXIT 0x0002 -#define dbg_printk(a_dbg_level, format, arg...) \ - do { if (dbg_level & a_dbg_level) \ - printk(TPACPI_DEBUG "%s: " format, __func__ , ## arg); \ - } while (0) -#ifdef CONFIG_THINKPAD_ACPI_DEBUG -#define vdbg_printk(a_dbg_level, format, arg...) \ - dbg_printk(a_dbg_level, format, ## arg) -static const char *str_supported(int is_supported); -#else -#define vdbg_printk(a_dbg_level, format, arg...) -#endif #define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off") #define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") @@ -326,6 +315,24 @@ static int tpacpi_uwb_emulstate; #endif +/************************************************************************* + * Debugging helpers + */ + +#define dbg_printk(a_dbg_level, format, arg...) \ + do { if (dbg_level & (a_dbg_level)) \ + printk(TPACPI_DEBUG "%s: " format, __func__ , ## arg); \ + } while (0) + +#ifdef CONFIG_THINKPAD_ACPI_DEBUG +#define vdbg_printk dbg_printk +static const char *str_supported(int is_supported); +#else +#define vdbg_printk(a_dbg_level, format, arg...) \ + do { } while (0) +#endif + + /**************************************************************************** **************************************************************************** * -- cgit v0.10.2 From 7ff8d62f7f055aaffbeb493863136c1b876bbe2e Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:46 +0000 Subject: thinkpad-acpi: add missing log levels Add missing log levels in a standalone commit, to avoid dependencies in future unrelated changes, just because they wanted to use one of the missing log levels. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 3367df9..6331b88 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -172,15 +172,18 @@ enum { TPACPI_RFK_UWB_SW_ID, }; -/* Debugging */ +/* printk headers */ #define TPACPI_LOG TPACPI_FILE ": " -#define TPACPI_ALERT KERN_ALERT TPACPI_LOG -#define TPACPI_CRIT KERN_CRIT TPACPI_LOG -#define TPACPI_ERR KERN_ERR TPACPI_LOG -#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG -#define TPACPI_INFO KERN_INFO TPACPI_LOG -#define TPACPI_DEBUG KERN_DEBUG TPACPI_LOG - +#define TPACPI_EMERG KERN_EMERG TPACPI_LOG +#define TPACPI_ALERT KERN_ALERT TPACPI_LOG +#define TPACPI_CRIT KERN_CRIT TPACPI_LOG +#define TPACPI_ERR KERN_ERR TPACPI_LOG +#define TPACPI_WARN KERN_WARNING TPACPI_LOG +#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG +#define TPACPI_INFO KERN_INFO TPACPI_LOG +#define TPACPI_DEBUG KERN_DEBUG TPACPI_LOG + +/* Debugging printk groups */ #define TPACPI_DBG_ALL 0xffff #define TPACPI_DBG_INIT 0x0001 #define TPACPI_DBG_EXIT 0x0002 -- cgit v0.10.2 From 73a94d86a8625371f76de0ee12dc5bacd3ed42c0 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:47 +0000 Subject: thinkpad-acpi: add new debug helpers and warn of deprecated atts Add a debug helper that discloses the TGID of the userspace task attempting to access the driver. This is highly useful when dealing with bug reports, since often the user has no idea that some userspace application is accessing thinkpad-acpi... Also add a helper to log warnings about sysfs attributes that are deprecated. Use the new helpers to issue deprecation warnings for bluetooth_enable and wwan_enabled, that have been deprecated for a while, now. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index f6e6bc6..e8f52fb 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1484,6 +1484,8 @@ will enable all debugging output classes. It takes a bitmask, so to enable more than one output class, just add their values. Debug bitmask Description + 0x8000 Disclose PID of userspace programs + accessing some functions of the driver 0x0001 Initialization and probing 0x0002 Removal diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 6331b88..852be7c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -54,6 +54,7 @@ #include #include #include +#include #include #include #include @@ -185,6 +186,7 @@ enum { /* Debugging printk groups */ #define TPACPI_DBG_ALL 0xffff +#define TPACPI_DBG_DISCLOSETASK 0x8000 #define TPACPI_DBG_INIT 0x0001 #define TPACPI_DBG_EXIT 0x0002 @@ -335,6 +337,21 @@ static const char *str_supported(int is_supported); do { } while (0) #endif +static void tpacpi_log_usertask(const char * const what) +{ + printk(TPACPI_DEBUG "%s: access by process with PID %d\n", + what, task_tgid_vnr(current)); +} + +#define tpacpi_disclose_usertask(what, format, arg...) \ + do { \ + if (unlikely( \ + (dbg_level & TPACPI_DBG_DISCLOSETASK) && \ + (tpacpi_lifecycle == TPACPI_LIFE_RUNNING))) { \ + printk(TPACPI_DEBUG "%s: PID %d: " format, \ + what, task_tgid_vnr(current), ## arg); \ + } \ + } while (0) /**************************************************************************** **************************************************************************** @@ -1030,6 +1047,21 @@ static int __init tpacpi_new_rfkill(const unsigned int id, return 0; } +static void printk_deprecated_attribute(const char * const what, + const char * const details) +{ + tpacpi_log_usertask("deprecated sysfs attribute"); + printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and " + "will be removed. %s\n", + what, details); +} + +static void printk_deprecated_rfkill_attribute(const char * const what) +{ + printk_deprecated_attribute(what, + "Please switch to generic rfkill before year 2010"); +} + /************************************************************************* * thinkpad-acpi driver attributes */ @@ -3070,6 +3102,8 @@ static ssize_t bluetooth_enable_show(struct device *dev, { int status; + printk_deprecated_rfkill_attribute("bluetooth_enable"); + status = bluetooth_get_radiosw(); if (status < 0) return status; @@ -3085,6 +3119,8 @@ static ssize_t bluetooth_enable_store(struct device *dev, unsigned long t; int res; + printk_deprecated_rfkill_attribute("bluetooth_enable"); + if (parse_strtoul(buf, 1, &t)) return -EINVAL; @@ -3347,6 +3383,8 @@ static ssize_t wan_enable_show(struct device *dev, { int status; + printk_deprecated_rfkill_attribute("wwan_enable"); + status = wan_get_radiosw(); if (status < 0) return status; @@ -3362,6 +3400,8 @@ static ssize_t wan_enable_store(struct device *dev, unsigned long t; int res; + printk_deprecated_rfkill_attribute("wwan_enable"); + if (parse_strtoul(buf, 1, &t)) return -EINVAL; -- cgit v0.10.2 From 2586d5663d0a17d69383acf6110f16a979a07c4e Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:48 +0000 Subject: thinkpad-acpi: remove HKEY disable functionality The HKEY disable functionality basically cripples the entire event model of the ThinkPad firmware and of the thinkpad-acpi driver. Remove this functionality from the driver. HKEY must be enabled at all times while thinkpad-acpi is loaded, and disabled otherwise. For sysfs, according to the sysfs ABI and the thinkpad-acpi sysfs rules of engagement, we will just remove the attributes. This will be done in two stages: disable their function now, after two kernel releases, remove the attributes. For procfs, we call WARN(). If nothing triggers it, I will simply remove the enable/disable commands entirely in the future along with the sysfs attributes. I don't expect much, if any fallout from this. There really isn't any reason to mess with hotkey_enable or with the enable/disable commands to /proc/acpi/ibm/hotkey, and this has been true for years... Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index e8f52fb..de6f14c 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -179,17 +179,14 @@ system. Enabling the hotkey functionality of thinkpad-acpi signals the firmware that such a driver is present, and modifies how the ThinkPad firmware will behave in many situations. -The driver enables the hot key feature automatically when loaded. The -feature can later be disabled and enabled back at runtime. The driver -will also restore the hot key feature to its previous state and mask -when it is unloaded. +The driver enables the HKEY ("hot key") event reporting automatically +when loaded, and disables it when it is removed. -When the hotkey feature is enabled and the hot key mask is set (see -below), the driver will report HKEY events in the following format: +The driver will report HKEY events in the following format: ibm/hotkey HKEY 00000080 0000xxxx -Some of these events refer to hot key presses, but not all. +Some of these events refer to hot key presses, but not all of them. The driver will generate events over the input layer for hot keys and radio switches, and over the ACPI netlink layer for other events. The @@ -221,13 +218,17 @@ procfs notes: The following commands can be written to the /proc/acpi/ibm/hotkey file: - echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature - echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys ... any other 8-hex-digit mask ... echo reset > /proc/acpi/ibm/hotkey -- restore the original mask +The following commands have been deprecated and will cause the kernel +to log a warning: + + echo enable > /proc/acpi/ibm/hotkey -- does nothing + echo disable > /proc/acpi/ibm/hotkey -- returns an error + The procfs interface does not support NVRAM polling control. So as to maintain maximum bug-to-bug compatibility, it does not report any masks, nor does it allow one to manipulate the hot key mask when the firmware @@ -236,12 +237,9 @@ does not support masks at all, even if NVRAM polling is in use. sysfs notes: hotkey_bios_enabled: - Returns the status of the hot keys feature when - thinkpad-acpi was loaded. Upon module unload, the hot - key feature status will be restored to this value. + DEPRECATED, WILL BE REMOVED SOON. - 0: hot keys were disabled - 1: hot keys were enabled (unusual) + Returns 0. hotkey_bios_mask: Returns the hot keys mask when thinkpad-acpi was loaded. @@ -249,13 +247,10 @@ sysfs notes: to this value. hotkey_enable: - Enables/disables the hot keys feature in the ACPI - firmware, and reports current status of the hot keys - feature. Has no effect on the NVRAM hot key polling - functionality. + DEPRECATED, WILL BE REMOVED SOON. - 0: disables the hot keys feature / feature disabled - 1: enables the hot keys feature / feature enabled + 0: returns -EPERM + 1: does nothing hotkey_mask: bit mask to enable driver-handling (and depending on @@ -1535,3 +1530,7 @@ Sysfs interface changelog: 0x020200: Add poll()/select() support to the following attributes: hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason + +0x020300: hotkey enable/disable support removed, attributes + hotkey_bios_enabled and hotkey_enable deprecated and + marked for removal. diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 852be7c..f003fb7 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -22,7 +22,7 @@ */ #define TPACPI_VERSION "0.22" -#define TPACPI_SYSFS_VERSION 0x020200 +#define TPACPI_SYSFS_VERSION 0x020300 /* * Changelog: @@ -1424,7 +1424,6 @@ static enum { /* Reasons for waking up */ static int hotkey_autosleep_ack; -static int hotkey_orig_status; static u32 hotkey_orig_mask; static u32 hotkey_all_mask; static u32 hotkey_reserved_mask; @@ -1571,9 +1570,9 @@ static int hotkey_status_get(int *status) return 0; } -static int hotkey_status_set(int status) +static int hotkey_status_set(bool enable) { - if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status)) + if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", enable ? 1 : 0)) return -EIO; return 0; @@ -1889,6 +1888,9 @@ static ssize_t hotkey_enable_show(struct device *dev, { int res, status; + printk_deprecated_attribute("hotkey_enable", + "Hotkey reporting is always enabled"); + res = hotkey_status_get(&status); if (res) return res; @@ -1901,14 +1903,17 @@ static ssize_t hotkey_enable_store(struct device *dev, const char *buf, size_t count) { unsigned long t; - int res; + + printk_deprecated_attribute("hotkey_enable", + "Hotkeys can be disabled through hotkey_mask"); if (parse_strtoul(buf, 1, &t)) return -EINVAL; - res = hotkey_status_set(t); + if (t == 0) + return -EPERM; - return (res) ? res : count; + return count; } static struct device_attribute dev_attr_hotkey_enable = @@ -1964,7 +1969,7 @@ static ssize_t hotkey_bios_enabled_show(struct device *dev, struct device_attribute *attr, char *buf) { - return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_orig_status); + return sprintf(buf, "0\n"); } static struct device_attribute dev_attr_hotkey_bios_enabled = @@ -2243,7 +2248,7 @@ static void hotkey_exit(void) "restoring original hot key mask\n"); /* no short-circuit boolean operator below! */ if ((hotkey_mask_set(hotkey_orig_mask) | - hotkey_status_set(hotkey_orig_status)) != 0) + hotkey_status_set(false)) != 0) printk(TPACPI_ERR "failed to restore hot key mask " "to BIOS defaults\n"); @@ -2438,10 +2443,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* hotkey_source_mask *must* be zero for * the first hotkey_mask_get */ - res = hotkey_status_get(&hotkey_orig_status); - if (res) - goto err_exit; - if (tp_features.hotkey_mask) { res = hotkey_mask_get(); if (res) @@ -2581,7 +2582,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) } dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); - res = hotkey_status_set(1); + res = hotkey_status_set(true); if (res) { hotkey_exit(); return res; @@ -2926,9 +2927,17 @@ static int hotkey_read(char *p) return len; } +static void hotkey_enabledisable_warn(void) +{ + tpacpi_log_usertask("procfs hotkey enable/disable"); + WARN(1, TPACPI_WARN + "hotkey enable/disable functionality has been " + "removed from the driver. Hotkeys are always enabled.\n"); +} + static int hotkey_write(char *buf) { - int res, status; + int res; u32 mask; char *cmd; @@ -2938,17 +2947,16 @@ static int hotkey_write(char *buf) if (mutex_lock_killable(&hotkey_mutex)) return -ERESTARTSYS; - status = -1; mask = hotkey_mask; res = 0; while ((cmd = next_cmd(&buf))) { if (strlencmp(cmd, "enable") == 0) { - status = 1; + hotkey_enabledisable_warn(); } else if (strlencmp(cmd, "disable") == 0) { - status = 0; + hotkey_enabledisable_warn(); + res = -EPERM; } else if (strlencmp(cmd, "reset") == 0) { - status = hotkey_orig_status; mask = hotkey_orig_mask; } else if (sscanf(cmd, "0x%x", &mask) == 1) { /* mask set */ @@ -2959,9 +2967,6 @@ static int hotkey_write(char *buf) goto errexit; } } - if (status != -1) - res = hotkey_status_set(status); - if (!res && mask != hotkey_mask) res = hotkey_mask_set(mask); -- cgit v0.10.2 From a4d5effcc73749ee3ebbf578d162905e6fa4e07d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:49 +0000 Subject: thinkpad-acpi: restrict access to some firmware LEDs Some of the ThinkPad LEDs indicate critical conditions that can cause data loss or cause hardware damage when ignored (e.g. force-ejecting a powered up bay; ignoring a failing battery, or empty battery; force- undocking with the dock buses still active, etc). On almost all ThinkPads, LED access is write-only, and the firmware usually does fire-and-forget signaling on them, so you effectively lose whatever message the firmware was trying to convey to the user when you override the LED state, without any chance to restore it. Restrict access to all LEDs that can convey important alarms, or that could mislead the user into incorrectly operating the hardware. This will make the Lenovo engineers less unhappy about the whole issue. Allow users that really want it to still control all LEDs, it is the unaware user that we have to worry about. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index de6f14c..bce1d95 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -901,6 +901,17 @@ some older ThinkPad models, it is possible to query the status of the LED indicators as well. Newer ThinkPads cannot query the real status of the LED indicators. +Because misuse of the LEDs could induce an unaware user to perform +dangerous actions (like undocking or ejecting a bay device while the +buses are still active), or mask an important alarm (such as a nearly +empty battery, or a broken battery), access to most LEDs is +restricted. + +Unrestricted access to all LEDs requires that thinkpad-acpi be +compiled with the CONFIG_THINKPAD_ACPI_UNSAFE_LEDS option enabled. +Distributions must never enable this option. Individual users that +are aware of the consequences are welcome to enabling it. + procfs notes: The available commands are: diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 3608081..d45c6ab 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -226,6 +226,30 @@ config THINKPAD_ACPI_DEBUG If you are not sure, say N here. +config THINKPAD_ACPI_UNSAFE_LEDS + bool "Allow control of important LEDs (unsafe)" + depends on THINKPAD_ACPI + default n + ---help--- + Overriding LED state on ThinkPads can mask important + firmware alerts (like critical battery condition), or misled + the user into damaging the hardware (undocking or ejecting + the bay while buses are still active), etc. + + LED control on the ThinkPad is write-only (with very few + exceptions on very ancient models), which makes it + impossible to know beforehand if important information will + be lost when one changes LED state. + + Users that know what they are doing can enable this option + and the driver will allow control of every LED, including + the ones on the dock stations. + + Never enable this option on a distribution kernel. + + Say N here, unless you are building a kernel for your own + use, and need to control the important firmware LEDs. + config THINKPAD_ACPI_DOCK bool "Legacy Docking Station Support" depends on THINKPAD_ACPI diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index f003fb7..38c34c7 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -4657,6 +4657,16 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = { "tpacpi::unknown_led", "tpacpi::standby", }; +#define TPACPI_SAFE_LEDS 0x0081U + +static inline bool tpacpi_is_led_restricted(const unsigned int led) +{ +#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS + return false; +#else + return (TPACPI_SAFE_LEDS & (1 << led)) == 0; +#endif +} static int led_get_status(const unsigned int led) { @@ -4694,16 +4704,20 @@ static int led_set_status(const unsigned int led, switch (led_supported) { case TPACPI_LED_570: /* 570 */ - if (led > 7) + if (unlikely(led > 7)) return -EINVAL; + if (unlikely(tpacpi_is_led_restricted(led))) + return -EPERM; if (!acpi_evalf(led_handle, NULL, NULL, "vdd", (1 << led), led_sled_arg1[ledstatus])) rc = -EIO; break; case TPACPI_LED_OLD: /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ - if (led > 7) + if (unlikely(led > 7)) return -EINVAL; + if (unlikely(tpacpi_is_led_restricted(led))) + return -EPERM; rc = ec_write(TPACPI_LED_EC_HLMS, (1 << led)); if (rc >= 0) rc = ec_write(TPACPI_LED_EC_HLBL, @@ -4714,6 +4728,10 @@ static int led_set_status(const unsigned int led, break; case TPACPI_LED_NEW: /* all others */ + if (unlikely(led >= TPACPI_LED_NUMLEDS)) + return -EINVAL; + if (unlikely(tpacpi_is_led_restricted(led))) + return -EPERM; if (!acpi_evalf(led_handle, NULL, NULL, "vdd", led, led_led_arg1[ledstatus])) rc = -EIO; @@ -4806,6 +4824,30 @@ static void led_exit(void) kfree(tpacpi_leds); } +static int __init tpacpi_init_led(unsigned int led) +{ + int rc; + + tpacpi_leds[led].led = led; + + tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set; + tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set; + if (led_supported == TPACPI_LED_570) + tpacpi_leds[led].led_classdev.brightness_get = + &led_sysfs_get; + + tpacpi_leds[led].led_classdev.name = tpacpi_led_names[led]; + + INIT_WORK(&tpacpi_leds[led].work, led_set_status_worker); + + rc = led_classdev_register(&tpacpi_pdev->dev, + &tpacpi_leds[led].led_classdev); + if (rc < 0) + tpacpi_leds[led].led_classdev.name = NULL; + + return rc; +} + static int __init led_init(struct ibm_init_struct *iibm) { unsigned int i; @@ -4839,27 +4881,21 @@ static int __init led_init(struct ibm_init_struct *iibm) } for (i = 0; i < TPACPI_LED_NUMLEDS; i++) { - tpacpi_leds[i].led = i; - - tpacpi_leds[i].led_classdev.brightness_set = &led_sysfs_set; - tpacpi_leds[i].led_classdev.blink_set = &led_sysfs_blink_set; - if (led_supported == TPACPI_LED_570) - tpacpi_leds[i].led_classdev.brightness_get = - &led_sysfs_get; - - tpacpi_leds[i].led_classdev.name = tpacpi_led_names[i]; - - INIT_WORK(&tpacpi_leds[i].work, led_set_status_worker); - - rc = led_classdev_register(&tpacpi_pdev->dev, - &tpacpi_leds[i].led_classdev); - if (rc < 0) { - tpacpi_leds[i].led_classdev.name = NULL; - led_exit(); - return rc; + if (!tpacpi_is_led_restricted(i)) { + rc = tpacpi_init_led(i); + if (rc < 0) { + led_exit(); + return rc; + } } } +#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS + if (led_supported != TPACPI_LED_NONE) + printk(TPACPI_NOTICE + "warning: userspace override of important " + "firmware LEDs is enabled\n"); +#endif return (led_supported != TPACPI_LED_NONE)? 0 : 1; } -- cgit v0.10.2 From bee4cd9b9eaa8c72832e1ee7f4940604e94beb27 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:50 +0000 Subject: thinkpad-acpi: enhanced debugging messages for rfkill subdrivers Enhance debugging messages for all rfkill subdrivers in thinkpad-acpi. Also, log a warning if the deprecated sysfs attributes are in use. These attributes are going to be removed sometime in 2010. There is an user-visible side-effect: we now coalesce attempts to enable/disable bluetooth or WWAN in the procfs interface, instead of hammering the firmware with multiple requests. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index bce1d95..7daca05 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1494,6 +1494,8 @@ to enable more than one output class, just add their values. accessing some functions of the driver 0x0001 Initialization and probing 0x0002 Removal + 0x0004 RF Transmitter control (RFKILL) + (bluetooth, WWAN, UWB...) There is also a kernel build option to enable more debugging information, which may be necessary to debug driver problems. diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 38c34c7..57ab551 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -189,6 +189,7 @@ enum { #define TPACPI_DBG_DISCLOSETASK 0x8000 #define TPACPI_DBG_INIT 0x0001 #define TPACPI_DBG_EXIT 0x0002 +#define TPACPI_DBG_RFKILL 0x0004 #define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off") #define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") @@ -1016,10 +1017,13 @@ static int __init tpacpi_new_rfkill(const unsigned int id, /* try to set the initial state as the default for the rfkill * type, since we ask the firmware to preserve it across S5 in * NVRAM */ - rfkill_set_default(rfktype, + if (rfkill_set_default(rfktype, (initial_state == RFKILL_STATE_UNBLOCKED) ? RFKILL_STATE_UNBLOCKED : - RFKILL_STATE_SOFT_BLOCKED); + RFKILL_STATE_SOFT_BLOCKED) == -EPERM) + vdbg_printk(TPACPI_DBG_RFKILL, + "Default state for %s cannot be changed\n", + name); } *rfk = rfkill_allocate(&tpacpi_pdev->dev, rfktype); @@ -3018,13 +3022,17 @@ enum { TP_ACPI_BLTH_SAVE_STATE = 0x05, /* Save state for S4/S5 */ }; +#define TPACPI_RFK_BLUETOOTH_SW_NAME "tpacpi_bluetooth_sw" + static struct rfkill *tpacpi_bluetooth_rfkill; static void bluetooth_suspend(pm_message_t state) { /* Try to make sure radio will resume powered off */ - acpi_evalf(NULL, NULL, "\\BLTH", "vd", - TP_ACPI_BLTH_PWR_OFF_ON_RESUME); + if (!acpi_evalf(NULL, NULL, "\\BLTH", "vd", + TP_ACPI_BLTH_PWR_OFF_ON_RESUME)) + vdbg_printk(TPACPI_DBG_RFKILL, + "bluetooth power down on resume request failed\n"); } static int bluetooth_get_radiosw(void) @@ -3062,6 +3070,10 @@ static void bluetooth_update_rfk(void) if (status < 0) return; rfkill_force_state(tpacpi_bluetooth_rfkill, status); + + vdbg_printk(TPACPI_DBG_RFKILL, + "forced rfkill state to %d\n", + status); } static int bluetooth_set_radiosw(int radio_on, int update_rfk) @@ -3077,6 +3089,9 @@ static int bluetooth_set_radiosw(int radio_on, int update_rfk) && radio_on) return -EPERM; + vdbg_printk(TPACPI_DBG_RFKILL, + "will %s bluetooth\n", radio_on ? "enable" : "disable"); + #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_bluetoothemul) { tpacpi_bluetooth_emulstate = !!radio_on; @@ -3129,6 +3144,8 @@ static ssize_t bluetooth_enable_store(struct device *dev, if (parse_strtoul(buf, 1, &t)) return -EINVAL; + tpacpi_disclose_usertask("bluetooth_enable", "set to %ld\n", t); + res = bluetooth_set_radiosw(t, 1); return (res) ? res : count; @@ -3162,6 +3179,8 @@ static int tpacpi_bluetooth_rfk_get(void *data, enum rfkill_state *state) static int tpacpi_bluetooth_rfk_set(void *data, enum rfkill_state state) { + dbg_printk(TPACPI_DBG_RFKILL, + "request to change radio state to %d\n", state); return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0); } @@ -3172,6 +3191,9 @@ static void bluetooth_shutdown(void) TP_ACPI_BLTH_SAVE_STATE)) printk(TPACPI_NOTICE "failed to save bluetooth state to NVRAM\n"); + else + vdbg_printk(TPACPI_DBG_RFKILL, + "bluestooth state saved to NVRAM\n"); } static void bluetooth_exit(void) @@ -3190,7 +3212,8 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) int res; int status = 0; - vdbg_printk(TPACPI_DBG_INIT, "initializing bluetooth subdriver\n"); + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL, + "initializing bluetooth subdriver\n"); TPACPI_ACPIHANDLE_INIT(hkey); @@ -3199,7 +3222,8 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) tp_features.bluetooth = hkey_handle && acpi_evalf(hkey_handle, &status, "GBDC", "qd"); - vdbg_printk(TPACPI_DBG_INIT, "bluetooth is %s, status 0x%02x\n", + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL, + "bluetooth is %s, status 0x%02x\n", str_supported(tp_features.bluetooth), status); @@ -3214,7 +3238,7 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) !(status & TP_ACPI_BLUETOOTH_HWPRESENT)) { /* no bluetooth hardware present in system */ tp_features.bluetooth = 0; - dbg_printk(TPACPI_DBG_INIT, + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL, "bluetooth hardware not installed\n"); } @@ -3229,7 +3253,7 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) res = tpacpi_new_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID, &tpacpi_bluetooth_rfkill, RFKILL_TYPE_BLUETOOTH, - "tpacpi_bluetooth_sw", + TPACPI_RFK_BLUETOOTH_SW_NAME, true, tpacpi_bluetooth_rfk_set, tpacpi_bluetooth_rfk_get); @@ -3262,19 +3286,27 @@ static int bluetooth_read(char *p) static int bluetooth_write(char *buf) { char *cmd; + int state = -1; if (!tp_features.bluetooth) return -ENODEV; while ((cmd = next_cmd(&buf))) { if (strlencmp(cmd, "enable") == 0) { - bluetooth_set_radiosw(1, 1); + state = 1; } else if (strlencmp(cmd, "disable") == 0) { - bluetooth_set_radiosw(0, 1); + state = 0; } else return -EINVAL; } + if (state != -1) { + tpacpi_disclose_usertask("procfs bluetooth", + "attempt to %s\n", + state ? "enable" : "disable"); + bluetooth_set_radiosw(state, 1); + } + return 0; } @@ -3299,13 +3331,17 @@ enum { off / last state */ }; +#define TPACPI_RFK_WWAN_SW_NAME "tpacpi_wwan_sw" + static struct rfkill *tpacpi_wan_rfkill; static void wan_suspend(pm_message_t state) { /* Try to make sure radio will resume powered off */ - acpi_evalf(NULL, NULL, "\\WGSV", "qvd", - TP_ACPI_WGSV_PWR_OFF_ON_RESUME); + if (!acpi_evalf(NULL, NULL, "\\WGSV", "qvd", + TP_ACPI_WGSV_PWR_OFF_ON_RESUME)) + vdbg_printk(TPACPI_DBG_RFKILL, + "WWAN power down on resume request failed\n"); } static int wan_get_radiosw(void) @@ -3343,6 +3379,10 @@ static void wan_update_rfk(void) if (status < 0) return; rfkill_force_state(tpacpi_wan_rfkill, status); + + vdbg_printk(TPACPI_DBG_RFKILL, + "forced rfkill state to %d\n", + status); } static int wan_set_radiosw(int radio_on, int update_rfk) @@ -3358,6 +3398,9 @@ static int wan_set_radiosw(int radio_on, int update_rfk) && radio_on) return -EPERM; + vdbg_printk(TPACPI_DBG_RFKILL, + "will %s WWAN\n", radio_on ? "enable" : "disable"); + #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_wwanemul) { tpacpi_wwan_emulstate = !!radio_on; @@ -3410,6 +3453,8 @@ static ssize_t wan_enable_store(struct device *dev, if (parse_strtoul(buf, 1, &t)) return -EINVAL; + tpacpi_disclose_usertask("wwan_enable", "set to %ld\n", t); + res = wan_set_radiosw(t, 1); return (res) ? res : count; @@ -3443,6 +3488,8 @@ static int tpacpi_wan_rfk_get(void *data, enum rfkill_state *state) static int tpacpi_wan_rfk_set(void *data, enum rfkill_state state) { + dbg_printk(TPACPI_DBG_RFKILL, + "request to change radio state to %d\n", state); return wan_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0); } @@ -3453,6 +3500,9 @@ static void wan_shutdown(void) TP_ACPI_WGSV_SAVE_STATE)) printk(TPACPI_NOTICE "failed to save WWAN state to NVRAM\n"); + else + vdbg_printk(TPACPI_DBG_RFKILL, + "WWAN state saved to NVRAM\n"); } static void wan_exit(void) @@ -3471,14 +3521,16 @@ static int __init wan_init(struct ibm_init_struct *iibm) int res; int status = 0; - vdbg_printk(TPACPI_DBG_INIT, "initializing wan subdriver\n"); + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL, + "initializing wan subdriver\n"); TPACPI_ACPIHANDLE_INIT(hkey); tp_features.wan = hkey_handle && acpi_evalf(hkey_handle, &status, "GWAN", "qd"); - vdbg_printk(TPACPI_DBG_INIT, "wan is %s, status 0x%02x\n", + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL, + "wan is %s, status 0x%02x\n", str_supported(tp_features.wan), status); @@ -3493,7 +3545,7 @@ static int __init wan_init(struct ibm_init_struct *iibm) !(status & TP_ACPI_WANCARD_HWPRESENT)) { /* no wan hardware present in system */ tp_features.wan = 0; - dbg_printk(TPACPI_DBG_INIT, + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL, "wan hardware not installed\n"); } @@ -3508,7 +3560,7 @@ static int __init wan_init(struct ibm_init_struct *iibm) res = tpacpi_new_rfkill(TPACPI_RFK_WWAN_SW_ID, &tpacpi_wan_rfkill, RFKILL_TYPE_WWAN, - "tpacpi_wwan_sw", + TPACPI_RFK_WWAN_SW_NAME, true, tpacpi_wan_rfk_set, tpacpi_wan_rfk_get); @@ -3526,6 +3578,8 @@ static int wan_read(char *p) int len = 0; int status = wan_get_radiosw(); + tpacpi_disclose_usertask("procfs wan", "read"); + if (!tp_features.wan) len += sprintf(p + len, "status:\t\tnot supported\n"); else { @@ -3541,19 +3595,27 @@ static int wan_read(char *p) static int wan_write(char *buf) { char *cmd; + int state = -1; if (!tp_features.wan) return -ENODEV; while ((cmd = next_cmd(&buf))) { if (strlencmp(cmd, "enable") == 0) { - wan_set_radiosw(1, 1); + state = 1; } else if (strlencmp(cmd, "disable") == 0) { - wan_set_radiosw(0, 1); + state = 0; } else return -EINVAL; } + if (state != -1) { + tpacpi_disclose_usertask("procfs wan", + "attempt to %s\n", + state ? "enable" : "disable"); + wan_set_radiosw(state, 1); + } + return 0; } @@ -3576,6 +3638,8 @@ enum { TP_ACPI_UWB_RADIOSSW = 0x02, /* UWB radio enabled */ }; +#define TPACPI_RFK_UWB_SW_NAME "tpacpi_uwb_sw" + static struct rfkill *tpacpi_uwb_rfkill; static int uwb_get_radiosw(void) @@ -3613,6 +3677,10 @@ static void uwb_update_rfk(void) if (status < 0) return; rfkill_force_state(tpacpi_uwb_rfkill, status); + + vdbg_printk(TPACPI_DBG_RFKILL, + "forced rfkill state to %d\n", + status); } static int uwb_set_radiosw(int radio_on, int update_rfk) @@ -3628,6 +3696,9 @@ static int uwb_set_radiosw(int radio_on, int update_rfk) && radio_on) return -EPERM; + vdbg_printk(TPACPI_DBG_RFKILL, + "will %s UWB\n", radio_on ? "enable" : "disable"); + #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_uwbemul) { tpacpi_uwb_emulstate = !!radio_on; @@ -3662,6 +3733,8 @@ static int tpacpi_uwb_rfk_get(void *data, enum rfkill_state *state) static int tpacpi_uwb_rfk_set(void *data, enum rfkill_state state) { + dbg_printk(TPACPI_DBG_RFKILL, + "request to change radio state to %d\n", state); return uwb_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0); } @@ -3676,14 +3749,16 @@ static int __init uwb_init(struct ibm_init_struct *iibm) int res; int status = 0; - vdbg_printk(TPACPI_DBG_INIT, "initializing uwb subdriver\n"); + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL, + "initializing uwb subdriver\n"); TPACPI_ACPIHANDLE_INIT(hkey); tp_features.uwb = hkey_handle && acpi_evalf(hkey_handle, &status, "GUWB", "qd"); - vdbg_printk(TPACPI_DBG_INIT, "uwb is %s, status 0x%02x\n", + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL, + "uwb is %s, status 0x%02x\n", str_supported(tp_features.uwb), status); @@ -3708,7 +3783,7 @@ static int __init uwb_init(struct ibm_init_struct *iibm) res = tpacpi_new_rfkill(TPACPI_RFK_UWB_SW_ID, &tpacpi_uwb_rfkill, RFKILL_TYPE_UWB, - "tpacpi_uwb_sw", + TPACPI_RFK_UWB_SW_NAME, false, tpacpi_uwb_rfk_set, tpacpi_uwb_rfk_get); -- cgit v0.10.2 From 56e2c200945dafafb86169762eb1e88aed0ce69e Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:51 +0000 Subject: thinkpad-acpi: enhanced debugging messages for the hotkey subdriver Enhance debugging messages for the hotkey subdriver. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 7daca05..abbbe78 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1496,6 +1496,7 @@ to enable more than one output class, just add their values. 0x0002 Removal 0x0004 RF Transmitter control (RFKILL) (bluetooth, WWAN, UWB...) + 0x0008 HKEY event interface, hotkeys There is also a kernel build option to enable more debugging information, which may be necessary to debug driver problems. diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 57ab551..0a4796a 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -190,6 +190,7 @@ enum { #define TPACPI_DBG_INIT 0x0001 #define TPACPI_DBG_EXIT 0x0002 #define TPACPI_DBG_RFKILL 0x0004 +#define TPACPI_DBG_HKEY 0x0008 #define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off") #define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") @@ -1961,6 +1962,8 @@ static ssize_t hotkey_mask_store(struct device *dev, mutex_unlock(&hotkey_mutex); + tpacpi_disclose_usertask("hotkey_mask", "set to 0x%08lx\n", t); + return (res) ? res : count; } @@ -2047,6 +2050,8 @@ static ssize_t hotkey_source_mask_store(struct device *dev, mutex_unlock(&hotkey_mutex); + tpacpi_disclose_usertask("hotkey_source_mask", "set to 0x%08lx\n", t); + return count; } @@ -2079,6 +2084,8 @@ static ssize_t hotkey_poll_freq_store(struct device *dev, hotkey_poll_setup(1); mutex_unlock(&hotkey_mutex); + tpacpi_disclose_usertask("hotkey_poll_freq", "set to %lu\n", t); + return count; } @@ -2248,7 +2255,7 @@ static void hotkey_exit(void) kfree(hotkey_keycode_map); if (tp_features.hotkey) { - dbg_printk(TPACPI_DBG_EXIT, + dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY, "restoring original hot key mask\n"); /* no short-circuit boolean operator below! */ if ((hotkey_mask_set(hotkey_orig_mask) | @@ -2378,7 +2385,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) int status; int hkeyv; - vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n"); + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, + "initializing hotkey subdriver\n"); BUG_ON(!tpacpi_inputdev); BUG_ON(tpacpi_inputdev->open != NULL || @@ -2395,7 +2403,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* hotkey not supported on 570 */ tp_features.hotkey = hkey_handle != NULL; - vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n", + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, + "hotkeys are %s\n", str_supported(tp_features.hotkey)); if (!tp_features.hotkey) @@ -2427,10 +2436,14 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) * T4x, X31, and later */ tp_features.hotkey_mask = 1; + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, + "firmware HKEY interface version: 0x%x\n", + hkeyv); } } - vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n", + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, + "hotkey masks are %s\n", str_supported(tp_features.hotkey_mask)); if (tp_features.hotkey_mask) { @@ -2469,7 +2482,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK; } - vdbg_printk(TPACPI_DBG_INIT, + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, "hotkey source mask 0x%08x, polling freq %d\n", hotkey_source_mask, hotkey_poll_freq); #endif @@ -2523,12 +2536,12 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) } if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - dbg_printk(TPACPI_DBG_INIT, + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, "using Lenovo default hot key map\n"); memcpy(hotkey_keycode_map, &lenovo_keycode_map, TPACPI_HOTKEY_MAP_SIZE); } else { - dbg_printk(TPACPI_DBG_INIT, + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, "using IBM default hot key map\n"); memcpy(hotkey_keycode_map, &ibm_keycode_map, TPACPI_HOTKEY_MAP_SIZE); @@ -2585,7 +2598,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) | (1 << TP_ACPI_HOTKEYSCAN_FNEND); } - dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, + "enabling firmware HKEY event interface...\n"); res = hotkey_status_set(true); if (res) { hotkey_exit(); @@ -2599,8 +2613,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) return res; } - dbg_printk(TPACPI_DBG_INIT, - "legacy hot key reporting over procfs %s\n", + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY, + "legacy ibm/hotkey event reporting over procfs %s\n", (hotkey_report_mode < 2) ? "enabled" : "disabled"); @@ -2971,6 +2985,11 @@ static int hotkey_write(char *buf) goto errexit; } } + + if (!res) + tpacpi_disclose_usertask("procfs hotkey", + "set mask to 0x%08x\n", mask); + if (!res && mask != hotkey_mask) res = hotkey_mask_set(mask); -- cgit v0.10.2 From 74a60c0f828016456fc635feae388ffd12bb3bb9 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:52 +0000 Subject: thinkpad-acpi: enhanced debugging messages for the fan subdriver Enhance debugging messages for the fan subdriver. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index abbbe78..25ed43d 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1497,6 +1497,7 @@ to enable more than one output class, just add their values. 0x0004 RF Transmitter control (RFKILL) (bluetooth, WWAN, UWB...) 0x0008 HKEY event interface, hotkeys + 0x0010 Fan control There is also a kernel build option to enable more debugging information, which may be necessary to debug driver problems. diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 0a4796a..4eec7703 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -191,6 +191,7 @@ enum { #define TPACPI_DBG_EXIT 0x0002 #define TPACPI_DBG_RFKILL 0x0004 #define TPACPI_DBG_HKEY 0x0008 +#define TPACPI_DBG_FAN 0x0010 #define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off") #define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") @@ -6271,6 +6272,9 @@ static int fan_set_level(int level) default: return -ENXIO; } + + vdbg_printk(TPACPI_DBG_FAN, + "fan control: set fan control register to 0x%02x\n", level); return 0; } @@ -6348,6 +6352,11 @@ static int fan_set_enable(void) } mutex_unlock(&fan_mutex); + + if (!rc) + vdbg_printk(TPACPI_DBG_FAN, + "fan control: set fan control register to 0x%02x\n", + s); return rc; } @@ -6384,6 +6393,9 @@ static int fan_set_disable(void) rc = -ENXIO; } + if (!rc) + vdbg_printk(TPACPI_DBG_FAN, + "fan control: set fan control register to 0\n"); mutex_unlock(&fan_mutex); return rc; @@ -6512,6 +6524,9 @@ static ssize_t fan_pwm1_enable_store(struct device *dev, if (parse_strtoul(buf, 2, &t)) return -EINVAL; + tpacpi_disclose_usertask("hwmon pwm1_enable", + "set fan mode to %lu\n", t); + switch (t) { case 0: level = TP_EC_FAN_FULLSPEED; @@ -6577,6 +6592,9 @@ static ssize_t fan_pwm1_store(struct device *dev, if (parse_strtoul(buf, 255, &s)) return -EINVAL; + tpacpi_disclose_usertask("hwmon pwm1", + "set fan speed to %lu\n", s); + /* scale down from 0-255 to 0-7 */ newlevel = (s >> 5) & 0x07; @@ -6643,6 +6661,8 @@ static ssize_t fan_fan_watchdog_store(struct device_driver *drv, fan_watchdog_maxinterval = t; fan_watchdog_reset(); + tpacpi_disclose_usertask("fan_watchdog", "set to %lu\n", t); + return count; } @@ -6664,7 +6684,8 @@ static int __init fan_init(struct ibm_init_struct *iibm) { int rc; - vdbg_printk(TPACPI_DBG_INIT, "initializing fan subdriver\n"); + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN, + "initializing fan subdriver\n"); mutex_init(&fan_mutex); fan_status_access_mode = TPACPI_FAN_NONE; @@ -6723,7 +6744,8 @@ static int __init fan_init(struct ibm_init_struct *iibm) } } - vdbg_printk(TPACPI_DBG_INIT, "fan is %s, modes %d, %d\n", + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN, + "fan is %s, modes %d, %d\n", str_supported(fan_status_access_mode != TPACPI_FAN_NONE || fan_control_access_mode != TPACPI_FAN_WR_NONE), fan_status_access_mode, fan_control_access_mode); @@ -6732,7 +6754,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (!fan_control_allowed) { fan_control_access_mode = TPACPI_FAN_WR_NONE; fan_control_commands = 0; - dbg_printk(TPACPI_DBG_INIT, + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN, "fan control features disabled by parameter\n"); } @@ -6761,7 +6783,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) static void fan_exit(void) { - vdbg_printk(TPACPI_DBG_EXIT, + vdbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_FAN, "cancelling any pending fan watchdog tasks\n"); /* FIXME: can we really do this unconditionally? */ @@ -6942,6 +6964,9 @@ static int fan_write_cmd_level(const char *cmd, int *rc) if (*rc == -ENXIO) printk(TPACPI_ERR "level command accepted for unsupported " "access mode %d", fan_control_access_mode); + else if (!*rc) + tpacpi_disclose_usertask("procfs fan", + "set level to %d\n", level); return 1; } @@ -6955,6 +6980,8 @@ static int fan_write_cmd_enable(const char *cmd, int *rc) if (*rc == -ENXIO) printk(TPACPI_ERR "enable command accepted for unsupported " "access mode %d", fan_control_access_mode); + else if (!*rc) + tpacpi_disclose_usertask("procfs fan", "enable\n"); return 1; } @@ -6968,6 +6995,8 @@ static int fan_write_cmd_disable(const char *cmd, int *rc) if (*rc == -ENXIO) printk(TPACPI_ERR "disable command accepted for unsupported " "access mode %d", fan_control_access_mode); + else if (!*rc) + tpacpi_disclose_usertask("procfs fan", "disable\n"); return 1; } @@ -6986,6 +7015,9 @@ static int fan_write_cmd_speed(const char *cmd, int *rc) if (*rc == -ENXIO) printk(TPACPI_ERR "speed command accepted for unsupported " "access mode %d", fan_control_access_mode); + else if (!*rc) + tpacpi_disclose_usertask("procfs fan", + "set speed to %d\n", speed); return 1; } @@ -6999,8 +7031,12 @@ static int fan_write_cmd_watchdog(const char *cmd, int *rc) if (interval < 0 || interval > 120) *rc = -EINVAL; - else + else { fan_watchdog_maxinterval = interval; + tpacpi_disclose_usertask("procfs fan", + "set watchdog timer to %d\n", + interval); + } return 1; } -- cgit v0.10.2 From 0e501834f8c2ba7de2a56e332d346dcf4ac0b593 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 4 Apr 2009 04:25:53 +0000 Subject: thinkpad-acpi: rework brightness support Refactor and redesign the brightness control backend... In order to fix bugzilla #11750... Add a new brightness control mode: support direct NVRAM checkpointing of the backlight level (i.e. store directly to NVRAM without the need for UCMS calls), and use that together with the EC-based control. Disallow UCMS+EC, thus avoiding races with the SMM firmware. Switch the models that define HBRV (EC Brightness Value) in the DSDT to the new mode. These are: T40-T43, R50-R52, R50e, R51e, X31-X41. Change the default for all other IBM ThinkPads to UCMS-only. The Lenovo models already default to UCMS-only. Reported-by: Alexey Fisher Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 25ed43d..3d76507 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1157,10 +1157,15 @@ display backlight brightness control methods have 16 levels, ranging from 0 to 15. There are two interfaces to the firmware for direct brightness control, -EC and CMOS. To select which one should be used, use the +EC and UCMS (or CMOS). To select which one should be used, use the brightness_mode module parameter: brightness_mode=1 selects EC mode, -brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC -and CMOS. The driver tries to auto-detect which interface to use. +brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC +mode with NVRAM backing (so that brightness changes are remembered +across shutdown/reboot). + +The driver tries to select which interface to use from a table of +defaults for each ThinkPad model. If it makes a wrong choice, please +report this as a bug, so that we can fix it. When display backlight brightness controls are available through the standard ACPI interface, it is best to use it instead of this direct @@ -1498,6 +1503,7 @@ to enable more than one output class, just add their values. (bluetooth, WWAN, UWB...) 0x0008 HKEY event interface, hotkeys 0x0010 Fan control + 0x0020 Backlight brightness There is also a kernel build option to enable more debugging information, which may be necessary to debug driver problems. diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 4eec7703..ba3682c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -192,6 +192,7 @@ enum { #define TPACPI_DBG_RFKILL 0x0004 #define TPACPI_DBG_HKEY 0x0008 #define TPACPI_DBG_FAN 0x0010 +#define TPACPI_DBG_BRGHT 0x0020 #define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off") #define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") @@ -274,7 +275,6 @@ static struct { static struct { u16 hotkey_mask_ff:1; - u16 bright_cmos_ec_unsync:1; } tp_warned; struct thinkpad_id_data { @@ -5526,6 +5526,20 @@ static struct ibm_struct ecdump_driver_data = { #define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen" +/* + * ThinkPads can read brightness from two places: EC HBRV (0x31), or + * CMOS NVRAM byte 0x5E, bits 0-3. + * + * EC HBRV (0x31) has the following layout + * Bit 7: unknown function + * Bit 6: unknown function + * Bit 5: Z: honour scale changes, NZ: ignore scale changes + * Bit 4: must be set to zero to avoid problems + * Bit 3-0: backlight brightness level + * + * brightness_get_raw returns status data in the HBRV layout + */ + enum { TP_EC_BACKLIGHT = 0x31, @@ -5535,108 +5549,164 @@ enum { TP_EC_BACKLIGHT_MAPSW = 0x20, }; +enum tpacpi_brightness_access_mode { + TPACPI_BRGHT_MODE_AUTO = 0, /* Not implemented yet */ + TPACPI_BRGHT_MODE_EC, /* EC control */ + TPACPI_BRGHT_MODE_UCMS_STEP, /* UCMS step-based control */ + TPACPI_BRGHT_MODE_ECNVRAM, /* EC control w/ NVRAM store */ + TPACPI_BRGHT_MODE_MAX +}; + static struct backlight_device *ibm_backlight_device; -static int brightness_mode; + +static enum tpacpi_brightness_access_mode brightness_mode = + TPACPI_BRGHT_MODE_MAX; + static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */ static struct mutex brightness_mutex; -/* - * ThinkPads can read brightness from two places: EC 0x31, or - * CMOS NVRAM byte 0x5E, bits 0-3. - * - * EC 0x31 has the following layout - * Bit 7: unknown function - * Bit 6: unknown function - * Bit 5: Z: honour scale changes, NZ: ignore scale changes - * Bit 4: must be set to zero to avoid problems - * Bit 3-0: backlight brightness level - * - * brightness_get_raw returns status data in the EC 0x31 layout - */ -static int brightness_get_raw(int *status) +/* NVRAM brightness access, + * call with brightness_mutex held! */ +static unsigned int tpacpi_brightness_nvram_get(void) { - u8 lec = 0, lcmos = 0, level = 0; + u8 lnvram; - if (brightness_mode & 1) { - if (!acpi_ec_read(TP_EC_BACKLIGHT, &lec)) - return -EIO; - level = lec & TP_EC_BACKLIGHT_LVLMSK; - }; - if (brightness_mode & 2) { - lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS) - & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) - >> TP_NVRAM_POS_LEVEL_BRIGHTNESS; - lcmos &= (tp_features.bright_16levels)? 0x0f : 0x07; - level = lcmos; - } - - if (brightness_mode == 3) { - *status = lec; /* Prefer EC, CMOS is just a backing store */ - lec &= TP_EC_BACKLIGHT_LVLMSK; - if (lec == lcmos) - tp_warned.bright_cmos_ec_unsync = 0; - else { - if (!tp_warned.bright_cmos_ec_unsync) { - printk(TPACPI_ERR - "CMOS NVRAM (%u) and EC (%u) do not " - "agree on display brightness level\n", - (unsigned int) lcmos, - (unsigned int) lec); - tp_warned.bright_cmos_ec_unsync = 1; - } + lnvram = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS) + & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) + >> TP_NVRAM_POS_LEVEL_BRIGHTNESS; + lnvram &= (tp_features.bright_16levels) ? 0x0f : 0x07; + + return lnvram; +} + +static void tpacpi_brightness_checkpoint_nvram(void) +{ + u8 lec = 0; + u8 b_nvram; + + if (brightness_mode != TPACPI_BRGHT_MODE_ECNVRAM) + return; + + vdbg_printk(TPACPI_DBG_BRGHT, + "trying to checkpoint backlight level to NVRAM...\n"); + + if (mutex_lock_killable(&brightness_mutex) < 0) + return; + + if (unlikely(!acpi_ec_read(TP_EC_BACKLIGHT, &lec))) + goto unlock; + lec &= TP_EC_BACKLIGHT_LVLMSK; + b_nvram = nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS); + + if (lec != ((b_nvram & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) + >> TP_NVRAM_POS_LEVEL_BRIGHTNESS)) { + /* NVRAM needs update */ + b_nvram &= ~(TP_NVRAM_MASK_LEVEL_BRIGHTNESS << + TP_NVRAM_POS_LEVEL_BRIGHTNESS); + b_nvram |= lec; + nvram_write_byte(b_nvram, TP_NVRAM_ADDR_BRIGHTNESS); + dbg_printk(TPACPI_DBG_BRGHT, + "updated NVRAM backlight level to %u (0x%02x)\n", + (unsigned int) lec, (unsigned int) b_nvram); + } else + vdbg_printk(TPACPI_DBG_BRGHT, + "NVRAM backlight level already is %u (0x%02x)\n", + (unsigned int) lec, (unsigned int) b_nvram); + +unlock: + mutex_unlock(&brightness_mutex); +} + + +/* call with brightness_mutex held! */ +static int tpacpi_brightness_get_raw(int *status) +{ + u8 lec = 0; + + switch (brightness_mode) { + case TPACPI_BRGHT_MODE_UCMS_STEP: + *status = tpacpi_brightness_nvram_get(); + return 0; + case TPACPI_BRGHT_MODE_EC: + case TPACPI_BRGHT_MODE_ECNVRAM: + if (unlikely(!acpi_ec_read(TP_EC_BACKLIGHT, &lec))) return -EIO; - } - } else { - *status = level; + *status = lec; + return 0; + default: + return -ENXIO; } +} + +/* call with brightness_mutex held! */ +/* do NOT call with illegal backlight level value */ +static int tpacpi_brightness_set_ec(unsigned int value) +{ + u8 lec = 0; + + if (unlikely(!acpi_ec_read(TP_EC_BACKLIGHT, &lec))) + return -EIO; + + if (unlikely(!acpi_ec_write(TP_EC_BACKLIGHT, + (lec & TP_EC_BACKLIGHT_CMDMSK) | + (value & TP_EC_BACKLIGHT_LVLMSK)))) + return -EIO; + + return 0; +} + +/* call with brightness_mutex held! */ +static int tpacpi_brightness_set_ucmsstep(unsigned int value) +{ + int cmos_cmd, inc; + unsigned int current_value, i; + + current_value = tpacpi_brightness_nvram_get(); + + if (value == current_value) + return 0; + + cmos_cmd = (value > current_value) ? + TP_CMOS_BRIGHTNESS_UP : + TP_CMOS_BRIGHTNESS_DOWN; + inc = (value > current_value) ? 1 : -1; + + for (i = current_value; i != value; i += inc) + if (issue_thinkpad_cmos_command(cmos_cmd)) + return -EIO; return 0; } /* May return EINTR which can always be mapped to ERESTARTSYS */ -static int brightness_set(int value) +static int brightness_set(unsigned int value) { - int cmos_cmd, inc, i, res; - int current_value; - int command_bits; + int res; if (value > ((tp_features.bright_16levels)? 15 : 7) || value < 0) return -EINVAL; + vdbg_printk(TPACPI_DBG_BRGHT, + "set backlight level to %d\n", value); + res = mutex_lock_killable(&brightness_mutex); if (res < 0) return res; - res = brightness_get_raw(¤t_value); - if (res < 0) - goto errout; - - command_bits = current_value & TP_EC_BACKLIGHT_CMDMSK; - current_value &= TP_EC_BACKLIGHT_LVLMSK; - - cmos_cmd = value > current_value ? - TP_CMOS_BRIGHTNESS_UP : - TP_CMOS_BRIGHTNESS_DOWN; - inc = (value > current_value)? 1 : -1; - - res = 0; - for (i = current_value; i != value; i += inc) { - if ((brightness_mode & 2) && - issue_thinkpad_cmos_command(cmos_cmd)) { - res = -EIO; - goto errout; - } - if ((brightness_mode & 1) && - !acpi_ec_write(TP_EC_BACKLIGHT, - (i + inc) | command_bits)) { - res = -EIO; - goto errout;; - } + switch (brightness_mode) { + case TPACPI_BRGHT_MODE_EC: + case TPACPI_BRGHT_MODE_ECNVRAM: + res = tpacpi_brightness_set_ec(value); + break; + case TPACPI_BRGHT_MODE_UCMS_STEP: + res = tpacpi_brightness_set_ucmsstep(value); + break; + default: + res = -ENXIO; } -errout: mutex_unlock(&brightness_mutex); return res; } @@ -5645,21 +5715,34 @@ errout: static int brightness_update_status(struct backlight_device *bd) { - /* it is the backlight class's job (caller) to handle - * EINTR and other errors properly */ - return brightness_set( + unsigned int level = (bd->props.fb_blank == FB_BLANK_UNBLANK && bd->props.power == FB_BLANK_UNBLANK) ? - bd->props.brightness : 0); + bd->props.brightness : 0; + + dbg_printk(TPACPI_DBG_BRGHT, + "backlight: attempt to set level to %d\n", + level); + + /* it is the backlight class's job (caller) to handle + * EINTR and other errors properly */ + return brightness_set(level); } static int brightness_get(struct backlight_device *bd) { int status, res; - res = brightness_get_raw(&status); + res = mutex_lock_killable(&brightness_mutex); if (res < 0) - return 0; /* FIXME: teach backlight about error handling */ + return 0; + + res = tpacpi_brightness_get_raw(&status); + + mutex_unlock(&brightness_mutex); + + if (res < 0) + return 0; return status & TP_EC_BACKLIGHT_LVLMSK; } @@ -5709,7 +5792,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm) } if (!brightness_enable) { - dbg_printk(TPACPI_DBG_INIT, + dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT, "brightness support disabled by " "module parameter\n"); return 1; @@ -5724,20 +5807,38 @@ static int __init brightness_init(struct ibm_init_struct *iibm) if (b == 16) tp_features.bright_16levels = 1; - if (!brightness_mode) { - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) - brightness_mode = 2; - else - brightness_mode = 3; + /* + * Check for module parameter bogosity, note that we + * init brightness_mode to TPACPI_BRGHT_MODE_MAX in order to be + * able to detect "unspecified" + */ + if (brightness_mode > TPACPI_BRGHT_MODE_MAX) + return -EINVAL; - dbg_printk(TPACPI_DBG_INIT, "selected brightness_mode=%d\n", - brightness_mode); - } + /* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */ + if (brightness_mode == TPACPI_BRGHT_MODE_AUTO || + brightness_mode == TPACPI_BRGHT_MODE_MAX) { + if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) { + /* + * IBM models that define HBRV probably have + * EC-based backlight level control + */ + if (acpi_evalf(ec_handle, NULL, "HBRV", "qd")) + /* T40-T43, R50-R52, R50e, R51e, X31-X41 */ + brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM; + else + /* all other IBM ThinkPads */ + brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP; + } else + /* All Lenovo ThinkPads */ + brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP; - if (brightness_mode > 3) - return -EINVAL; + dbg_printk(TPACPI_DBG_BRGHT, + "selected brightness_mode=%d\n", + brightness_mode); + } - if (brightness_get_raw(&b) < 0) + if (tpacpi_brightness_get_raw(&b) < 0) return 1; if (tp_features.bright_16levels) @@ -5751,7 +5852,8 @@ static int __init brightness_init(struct ibm_init_struct *iibm) printk(TPACPI_ERR "Could not register backlight device\n"); return PTR_ERR(ibm_backlight_device); } - vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n"); + vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT, + "brightness is supported\n"); ibm_backlight_device->props.max_brightness = (tp_features.bright_16levels)? 15 : 7; @@ -5761,13 +5863,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm) return 0; } +static void brightness_suspend(pm_message_t state) +{ + tpacpi_brightness_checkpoint_nvram(); +} + +static void brightness_shutdown(void) +{ + tpacpi_brightness_checkpoint_nvram(); +} + static void brightness_exit(void) { if (ibm_backlight_device) { - vdbg_printk(TPACPI_DBG_EXIT, + vdbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_BRGHT, "calling backlight_device_unregister()\n"); backlight_device_unregister(ibm_backlight_device); } + + tpacpi_brightness_checkpoint_nvram(); } static int brightness_read(char *p) @@ -5814,6 +5928,9 @@ static int brightness_write(char *buf) return -EINVAL; } + tpacpi_disclose_usertask("procfs brightness", + "set level to %d\n", level); + /* * Now we know what the final level should be, so we try to set it. * Doing it this way makes the syscall restartable in case of EINTR @@ -5827,6 +5944,8 @@ static struct ibm_struct brightness_driver_data = { .read = brightness_read, .write = brightness_write, .exit = brightness_exit, + .suspend = brightness_suspend, + .shutdown = brightness_shutdown, }; /************************************************************************* @@ -7465,10 +7584,10 @@ module_param_named(fan_control, fan_control_allowed, bool, 0); MODULE_PARM_DESC(fan_control, "Enables setting fan parameters features when true"); -module_param_named(brightness_mode, brightness_mode, int, 0); +module_param_named(brightness_mode, brightness_mode, uint, 0); MODULE_PARM_DESC(brightness_mode, "Selects brightness control strategy: " - "0=auto, 1=EC, 2=CMOS, 3=both"); + "0=auto, 1=EC, 2=UCMS, 3=EC+NVRAM"); module_param(brightness_enable, uint, 0); MODULE_PARM_DESC(brightness_enable, -- cgit v0.10.2