From 8c6e46ddb343004e33653f62f0b09c0721cd8c12 Mon Sep 17 00:00:00 2001 From: Mikhail Cherkashin Date: Tue, 15 Jul 2008 21:21:40 +0200 Subject: palm_bk3710: fix tRP for UDMA mode 4 Fix tRP timing for UDMA mode 4 according to the ATA specification. Signed-off-by: Mikhail Cherkashin Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 2f2b4f4..74a05dc 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -83,7 +83,7 @@ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { {125, 160}, /* UDMA Mode 1 */ {100, 120}, /* UDMA Mode 2 */ {100, 90}, /* UDMA Mode 3 */ - {85, 60}, /* UDMA Mode 4 */ + {100, 60}, /* UDMA Mode 4 */ }; static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, -- cgit v0.10.2 From 5ddee516dae1acc779b36cb7565720a80503196d Mon Sep 17 00:00:00 2001 From: Mikhail Cherkashin Date: Tue, 15 Jul 2008 21:21:40 +0200 Subject: ide: disable drive interrupts in ide_driveid_update() Since ide_driveid_update() uses polling to execute the IDENTIFY DEVICE command but clears nIEN bit in the control register and doesn't mask the IDE interrupt, the latter does happen and lead to the corresponding message to appear: ide0: unexpected interrupt, status=0x58, count=1 when e.g. running hdparm with option -X with a non-PCI IDE driver... Signed-off-by: Mikhail Cherkashin Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 0daf923..c2dd20a 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -689,7 +689,7 @@ int ide_driveid_update(ide_drive_t *drive) */ SELECT_MASK(drive, 1); - ide_set_irq(drive, 1); + ide_set_irq(drive, 0); msleep(50); hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr); timeout = jiffies + WAIT_WORSTCASE; -- cgit v0.10.2 From d6cddd3cac6650f273a2595c9f403aacee01ab05 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 15 Jul 2008 21:21:41 +0200 Subject: ide: eliminate FIT() macro Replace the FIT() macro with the kernel-provided clamp_val() macro. FIT was always being called with a member of a struct ide_timing, which are shorts, and constant constraints for the min and max. Thus we can use clamp_val, rather than clamp_t. Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index 3b12ffe..2e91c58 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -95,7 +95,6 @@ static struct ide_timing ide_timing[] = { #define IDE_TIMING_UDMA 0x80 #define IDE_TIMING_ALL 0xff -#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) #define ENOUGH(v,unit) (((v)-1)/(unit)+1) #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index efcf543..a373101 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -53,20 +53,20 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, u8 t = 0, offset = amd_offset(dev); pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t); pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)), - ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn), - ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); switch (udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; - case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; - case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break; + case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break; + case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break; + case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break; default: return; } diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 566e0ec..e8c2570 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -120,21 +120,21 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) if (~vdev->via_config->flags & VIA_BAD_AST) { pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); } pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)), - ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), - ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); switch (vdev->via_config->udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; - case ATA_UDMA5: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; - case ATA_UDMA6: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; + case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; + case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; + case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; default: return; } -- cgit v0.10.2 From a792bd5a407872714942f50bf24083874ce03745 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 15 Jul 2008 21:21:41 +0200 Subject: ide-tape: use clamp_t() rather than nested min_t()/max_t() Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1e1f263..2d822df 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2746,9 +2746,8 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) * Ensure that the number we got makes sense; limit it within * IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX. */ - tape->best_dsc_rw_freq = max_t(unsigned long, - min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), - IDETAPE_DSC_RW_MIN); + tape->best_dsc_rw_freq = clamp_t(unsigned long, t, IDETAPE_DSC_RW_MIN, + IDETAPE_DSC_RW_MAX); printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " "%lums tDSC%s\n", drive->name, tape->name, *(u16 *)&tape->caps[14], -- cgit v0.10.2 From 5d0cc8ae29b310ceb6516a6840ca22738aab7820 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 15 Jul 2008 21:21:41 +0200 Subject: ide: use get_unaligned_* helpers Signed-off-by: Harvey Harrison Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2d822df..1a96cc5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -538,7 +538,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) if (pc->flags & PC_FLAG_DMA_ERROR) { pc->xferred = pc->req_xfer - tape->blk_size * - be32_to_cpu(get_unaligned((u32 *)&sense[3])); + get_unaligned_be32(&sense[3]); idetape_update_buffers(pc); } -- cgit v0.10.2 From e8a96aa71355edef9f40ce01459acf25c50cb78c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:41 +0200 Subject: ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() users * Set REQ_PREEMPT request flag in ide_do_drive_cmd() users for ide_preempt and ide_head_wait action types. * Remove setting REQ_PREEMPT from ide_do_drive_cmd(). While at it: * Set 'where' variable outside ide_lock. This is a preparation for converting IDE to use blk_execute_rq(). There should be no functional changes caused by this patch. Cc: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 68e7f19..ff88159 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -216,6 +216,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->data_len = 18; rq->cmd_type = REQ_TYPE_SENSE; + rq->cmd_flags |= REQ_PREEMPT; /* NOTE! Save the failed command in "rq->buffer" */ rq->buffer = (void *) failed_command; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index f05fbc2..7d75240 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -289,6 +289,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, ide_init_drive_cmd(rq); rq->buffer = (char *) pc; rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_flags |= REQ_PREEMPT; rq->rq_disk = floppy->disk; (void) ide_do_drive_cmd(drive, rq, ide_preempt); } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 6965253..5aed79e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1600,13 +1600,12 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio rq->end_io = blk_end_sync_rq; } + if (action == ide_preempt || action == ide_head_wait) + where = ELEVATOR_INSERT_FRONT; + spin_lock_irqsave(&ide_lock, flags); if (action == ide_preempt) hwgroup->rq = NULL; - if (action == ide_preempt || action == ide_head_wait) { - where = ELEVATOR_INSERT_FRONT; - rq->cmd_flags |= REQ_PREEMPT; - } __elv_add_request(drive->queue, rq, where, 0); ide_do_request(hwgroup, IDE_NO_IRQ); spin_unlock_irqrestore(&ide_lock, flags); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1a96cc5..d67a178 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -688,6 +688,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, struct ide_tape_obj *tape = drive->driver_data; idetape_init_rq(rq, REQ_IDETAPE_PC1); + rq->cmd_flags |= REQ_PREEMPT; rq->buffer = (char *) pc; rq->rq_disk = tape->disk; (void) ide_do_drive_cmd(drive, rq, ide_preempt); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 300431d..c9a0572 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -606,6 +606,7 @@ static int generic_ide_resume(struct device *dev) memset(&rqpm, 0, sizeof(rqpm)); memset(&args, 0, sizeof(args)); rq.cmd_type = REQ_TYPE_PM_RESUME; + rq.cmd_flags |= REQ_PREEMPT; rq.special = &args; rq.data = &rqpm; rqpm.pm_step = ide_pm_state_start_resume; diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 44d8d51..89ecf01 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -235,6 +235,7 @@ static int idescsi_check_condition(ide_drive_t *drive, pc->c[0] = REQUEST_SENSE; pc->c[4] = pc->req_xfer = pc->buf_size = SCSI_SENSE_BUFFERSIZE; rq->cmd_type = REQ_TYPE_SENSE; + rq->cmd_flags |= REQ_PREEMPT; pc->timeout = jiffies + WAIT_READY; /* NOTE! Save the failed packet command in "rq->buffer" */ rq->buffer = (void *) failed_cmd->special; -- cgit v0.10.2 From c6866a6ff571eebebda45bf14b5b62188768893a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:42 +0200 Subject: ide: use __generic_unplug_device() in ide_do_drive_cmd() (take 2) * Call __elv_add_request() with 'plug' == 1 (so the device will be plugged) and then use __generic_unplug_device() instead of calling ide_do_request() directly. v2: * For blk_pm_resume_request() requests the queue is stopped so we need to call ->request_fn explicitly. Thanks to: - Rafael for reporting/bisecting the bug - Borislav/Rafael for testing the fix This is a preparation for converting IDE to use blk_execute_rq(). Cc: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Cc: "Rafael J. Wysocki" Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 5aed79e..1eb3f5c 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1606,8 +1606,11 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio spin_lock_irqsave(&ide_lock, flags); if (action == ide_preempt) hwgroup->rq = NULL; - __elv_add_request(drive->queue, rq, where, 0); - ide_do_request(hwgroup, IDE_NO_IRQ); + __elv_add_request(drive->queue, rq, where, 1); + __generic_unplug_device(drive->queue); + /* the queue is stopped so it won't be plugged+unplugged */ + if (blk_pm_resume_request(rq)) + do_ide_request(drive->queue); spin_unlock_irqrestore(&ide_lock, flags); err = 0; -- cgit v0.10.2 From 5f828546e1acb45678e73d3a9a796c1a3a8c7846 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:42 +0200 Subject: ide-cd: convert ide_cd_queue_pc to use blk_execute_rq This converts ide_cd_queue_pc to use blk_execute_rq, necessitating changing the ide_cd_queue_pc prototype into a form that doesn't takes a pointer to request struct. ide_cd_queue_pc works like scsi_execute. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ff88159..792a3cf 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -839,34 +839,54 @@ static void ide_cd_request_sense_fixup(struct request *rq) } } -int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) +int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, + int write, void *buffer, unsigned *bufflen, + struct request_sense *sense, int timeout, + unsigned int cmd_flags) { - struct request_sense sense; + struct cdrom_info *info = drive->driver_data; + struct request_sense local_sense; int retries = 10; - unsigned int flags = rq->cmd_flags; + unsigned int flags = 0; - if (rq->sense == NULL) - rq->sense = &sense; + if (!sense) + sense = &local_sense; /* start of retry loop */ do { + struct request *rq; int error; - unsigned long time = jiffies; - rq->cmd_flags = flags; - error = ide_do_drive_cmd(drive, rq, ide_wait); - time = jiffies - time; + rq = blk_get_request(drive->queue, write, __GFP_WAIT); + + memcpy(rq->cmd, cmd, BLK_MAX_CDB); + rq->cmd_type = REQ_TYPE_ATA_PC; + rq->sense = sense; + rq->cmd_flags |= cmd_flags; + rq->timeout = timeout; + if (buffer) { + rq->data = buffer; + rq->data_len = *bufflen; + } + + error = blk_execute_rq(drive->queue, info->disk, rq, 0); + + if (buffer) + *bufflen = rq->data_len; + + flags = rq->cmd_flags; + blk_put_request(rq); /* * FIXME: we should probably abort/retry or something in case of * failure. */ - if (rq->cmd_flags & REQ_FAILED) { + if (flags & REQ_FAILED) { /* * The request failed. Retry if it was due to a unit * attention status (usually means media was changed). */ - struct request_sense *reqbuf = rq->sense; + struct request_sense *reqbuf = sense; if (reqbuf->sense_key == UNIT_ATTENTION) cdrom_saw_media_change(drive); @@ -886,10 +906,10 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) } /* end of retry loop */ - } while ((rq->cmd_flags & REQ_FAILED) && retries >= 0); + } while ((flags & REQ_FAILED) && retries >= 0); /* return an error if the command failed */ - return (rq->cmd_flags & REQ_FAILED) ? -EIO : 0; + return (flags & REQ_FAILED) ? -EIO : 0; } /* @@ -1269,23 +1289,20 @@ static void msf_from_bcd(struct atapi_msf *msf) int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) { - struct request req; struct cdrom_info *info = drive->driver_data; struct cdrom_device_info *cdi = &info->devinfo; + unsigned char cmd[BLK_MAX_CDB]; - ide_cd_init_rq(drive, &req); - - req.sense = sense; - req.cmd[0] = GPCMD_TEST_UNIT_READY; - req.cmd_flags |= REQ_QUIET; + memset(cmd, 0, BLK_MAX_CDB); + cmd[0] = GPCMD_TEST_UNIT_READY; /* * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs * instead of supporting the LOAD_UNLOAD opcode. */ - req.cmd[7] = cdi->sanyo_slot % 3; + cmd[7] = cdi->sanyo_slot % 3; - return ide_cd_queue_pc(drive, &req); + return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, sense, 0, REQ_QUIET); } static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, @@ -1298,17 +1315,14 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, } capbuf; int stat; - struct request req; - - ide_cd_init_rq(drive, &req); + unsigned char cmd[BLK_MAX_CDB]; + unsigned len = sizeof(capbuf); - req.sense = sense; - req.cmd[0] = GPCMD_READ_CDVD_CAPACITY; - req.data = (char *)&capbuf; - req.data_len = sizeof(capbuf); - req.cmd_flags |= REQ_QUIET; + memset(cmd, 0, BLK_MAX_CDB); + cmd[0] = GPCMD_READ_CDVD_CAPACITY; - stat = ide_cd_queue_pc(drive, &req); + stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, sense, 0, + REQ_QUIET); if (stat == 0) { *capacity = 1 + be32_to_cpu(capbuf.lba); *sectors_per_frame = @@ -1322,24 +1336,20 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag, int format, char *buf, int buflen, struct request_sense *sense) { - struct request req; + unsigned char cmd[BLK_MAX_CDB]; - ide_cd_init_rq(drive, &req); + memset(cmd, 0, BLK_MAX_CDB); - req.sense = sense; - req.data = buf; - req.data_len = buflen; - req.cmd_flags |= REQ_QUIET; - req.cmd[0] = GPCMD_READ_TOC_PMA_ATIP; - req.cmd[6] = trackno; - req.cmd[7] = (buflen >> 8); - req.cmd[8] = (buflen & 0xff); - req.cmd[9] = (format << 6); + cmd[0] = GPCMD_READ_TOC_PMA_ATIP; + cmd[6] = trackno; + cmd[7] = (buflen >> 8); + cmd[8] = (buflen & 0xff); + cmd[9] = (format << 6); if (msf_flag) - req.cmd[1] = 2; + cmd[1] = 2; - return ide_cd_queue_pc(drive, &req); + return ide_cd_queue_pc(drive, cmd, 0, buf, &buflen, sense, 0, REQ_QUIET); } /* Try to read the entire TOC for the disk into our internal buffer. */ diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index a58801c..df01cfd 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -144,7 +144,8 @@ void ide_cd_log_error(const char *, struct request *, struct request_sense *); /* ide-cd.c functions used by ide-cd_ioctl.c */ void ide_cd_init_rq(ide_drive_t *, struct request *); -int ide_cd_queue_pc(ide_drive_t *, struct request *); +int ide_cd_queue_pc(ide_drive_t *, const unsigned char *, int, void *, + unsigned *, struct request_sense *, int, unsigned int); int ide_cd_read_toc(ide_drive_t *, struct request_sense *); int ide_cdrom_get_capabilities(ide_drive_t *, u8 *); void ide_cdrom_update_speed(ide_drive_t *, u8 *); diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index 6d147ce..8512770 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -104,8 +104,8 @@ int cdrom_eject(ide_drive_t *drive, int ejectflag, { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; - struct request req; char loej = 0x02; + unsigned char cmd[BLK_MAX_CDB]; if ((cd->cd_flags & IDE_CD_FLAG_NO_EJECT) && !ejectflag) return -EDRIVE_CANT_DO_THIS; @@ -114,17 +114,16 @@ int cdrom_eject(ide_drive_t *drive, int ejectflag, if ((cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED) && ejectflag) return 0; - ide_cd_init_rq(drive, &req); - /* only tell drive to close tray if open, if it can do that */ if (ejectflag && (cdi->mask & CDC_CLOSE_TRAY)) loej = 0; - req.sense = sense; - req.cmd[0] = GPCMD_START_STOP_UNIT; - req.cmd[4] = loej | (ejectflag != 0); + memset(cmd, 0, BLK_MAX_CDB); + + cmd[0] = GPCMD_START_STOP_UNIT; + cmd[4] = loej | (ejectflag != 0); - return ide_cd_queue_pc(drive, &req); + return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, sense, 0, 0); } /* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */ @@ -134,7 +133,6 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag, { struct cdrom_info *cd = drive->driver_data; struct request_sense my_sense; - struct request req; int stat; if (sense == NULL) @@ -144,11 +142,15 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag, if (cd->cd_flags & IDE_CD_FLAG_NO_DOORLOCK) { stat = 0; } else { - ide_cd_init_rq(drive, &req); - req.sense = sense; - req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; - req.cmd[4] = lockflag ? 1 : 0; - stat = ide_cd_queue_pc(drive, &req); + unsigned char cmd[BLK_MAX_CDB]; + + memset(cmd, 0, BLK_MAX_CDB); + + cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; + cmd[4] = lockflag ? 1 : 0; + + stat = ide_cd_queue_pc(drive, cmd, 0, NULL, 0, + sense, 0, 0); } /* If we got an illegal field error, the drive @@ -206,32 +208,30 @@ int ide_cdrom_select_speed(struct cdrom_device_info *cdi, int speed) { ide_drive_t *drive = cdi->handle; struct cdrom_info *cd = drive->driver_data; - struct request rq; struct request_sense sense; u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE]; int stat; - - ide_cd_init_rq(drive, &rq); - - rq.sense = &sense; + unsigned char cmd[BLK_MAX_CDB]; if (speed == 0) speed = 0xffff; /* set to max */ else speed *= 177; /* Nx to kbytes/s */ - rq.cmd[0] = GPCMD_SET_SPEED; + memset(cmd, 0, BLK_MAX_CDB); + + cmd[0] = GPCMD_SET_SPEED; /* Read Drive speed in kbytes/second MSB/LSB */ - rq.cmd[2] = (speed >> 8) & 0xff; - rq.cmd[3] = speed & 0xff; + cmd[2] = (speed >> 8) & 0xff; + cmd[3] = speed & 0xff; if ((cdi->mask & (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) != (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) { /* Write Drive speed in kbytes/second MSB/LSB */ - rq.cmd[4] = (speed >> 8) & 0xff; - rq.cmd[5] = speed & 0xff; + cmd[4] = (speed >> 8) & 0xff; + cmd[5] = speed & 0xff; } - stat = ide_cd_queue_pc(drive, &rq); + stat = ide_cd_queue_pc(drive, cmd, 0, NULL, 0, &sense, 0, 0); if (!ide_cdrom_get_capabilities(drive, buf)) { ide_cdrom_update_speed(drive, buf); @@ -268,21 +268,19 @@ int ide_cdrom_get_mcn(struct cdrom_device_info *cdi, { ide_drive_t *drive = cdi->handle; int stat, mcnlen; - struct request rq; char buf[24]; + unsigned char cmd[BLK_MAX_CDB]; + unsigned len = sizeof(buf); - ide_cd_init_rq(drive, &rq); + memset(cmd, 0, BLK_MAX_CDB); - rq.data = buf; - rq.data_len = sizeof(buf); + cmd[0] = GPCMD_READ_SUBCHANNEL; + cmd[1] = 2; /* MSF addressing */ + cmd[2] = 0x40; /* request subQ data */ + cmd[3] = 2; /* format */ + cmd[8] = len; - rq.cmd[0] = GPCMD_READ_SUBCHANNEL; - rq.cmd[1] = 2; /* MSF addressing */ - rq.cmd[2] = 0x40; /* request subQ data */ - rq.cmd[3] = 2; /* format */ - rq.cmd[8] = sizeof(buf); - - stat = ide_cd_queue_pc(drive, &rq); + stat = ide_cd_queue_pc(drive, cmd, 0, buf, &len, NULL, 0, 0); if (stat) return stat; @@ -351,8 +349,8 @@ static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg) struct atapi_toc_entry *first_toc, *last_toc; unsigned long lba_start, lba_end; int stat; - struct request rq; struct request_sense sense; + unsigned char cmd[BLK_MAX_CDB]; stat = ide_cd_get_toc_entry(drive, ti->cdti_trk0, &first_toc); if (stat) @@ -370,14 +368,13 @@ static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg) if (lba_end <= lba_start) return -EINVAL; - ide_cd_init_rq(drive, &rq); + memset(cmd, 0, BLK_MAX_CDB); - rq.sense = &sense; - rq.cmd[0] = GPCMD_PLAY_AUDIO_MSF; - lba_to_msf(lba_start, &rq.cmd[3], &rq.cmd[4], &rq.cmd[5]); - lba_to_msf(lba_end - 1, &rq.cmd[6], &rq.cmd[7], &rq.cmd[8]); + cmd[0] = GPCMD_PLAY_AUDIO_MSF; + lba_to_msf(lba_start, &cmd[3], &cmd[4], &cmd[5]); + lba_to_msf(lba_end - 1, &cmd[6], &cmd[7], &cmd[8]); - return ide_cd_queue_pc(drive, &rq); + return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, &sense, 0, 0); } static int ide_cd_read_tochdr(ide_drive_t *drive, void *arg) @@ -447,8 +444,9 @@ int ide_cdrom_audio_ioctl(struct cdrom_device_info *cdi, int ide_cdrom_packet(struct cdrom_device_info *cdi, struct packet_command *cgc) { - struct request req; ide_drive_t *drive = cdi->handle; + unsigned int flags = 0; + unsigned len = cgc->buflen; if (cgc->timeout <= 0) cgc->timeout = ATAPI_WAIT_PC; @@ -456,24 +454,21 @@ int ide_cdrom_packet(struct cdrom_device_info *cdi, /* here we queue the commands from the uniform CD-ROM layer. the packet must be complete, as we do not touch it at all. */ - ide_cd_init_rq(drive, &req); if (cgc->data_direction == CGC_DATA_WRITE) - req.cmd_flags |= REQ_RW; + flags |= REQ_RW; - memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE); if (cgc->sense) memset(cgc->sense, 0, sizeof(struct request_sense)); - req.data = cgc->buffer; - req.data_len = cgc->buflen; - req.timeout = cgc->timeout; if (cgc->quiet) - req.cmd_flags |= REQ_QUIET; + flags |= REQ_QUIET; - req.sense = cgc->sense; - cgc->stat = ide_cd_queue_pc(drive, &req); + cgc->stat = ide_cd_queue_pc(drive, cgc->cmd, + cgc->data_direction == CGC_DATA_WRITE, + cgc->buffer, &len, + cgc->sense, cgc->timeout, flags); if (!cgc->stat) - cgc->buflen -= req.data_len; + cgc->buflen -= len; return cgc->stat; } -- cgit v0.10.2 From 0ef4c4db7faabe4fb8a516e9e991e1e8e87a647f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:42 +0200 Subject: ide-cd: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index 8512770..24d002a 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -296,14 +296,14 @@ int ide_cdrom_reset(struct cdrom_device_info *cdi) ide_drive_t *drive = cdi->handle; struct cdrom_info *cd = drive->driver_data; struct request_sense sense; - struct request req; + struct request *rq; int ret; - ide_cd_init_rq(drive, &req); - req.cmd_type = REQ_TYPE_SPECIAL; - req.cmd_flags = REQ_QUIET; - ret = ide_do_drive_cmd(drive, &req, ide_wait); - + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_flags = REQ_QUIET; + ret = blk_execute_rq(drive->queue, cd->disk, rq, 0); + blk_put_request(rq); /* * A reset will unlock the door. If it was previously locked, * lock it again. -- cgit v0.10.2 From dd47087bc173a84e8c42644b315d38b30dc02263 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: ide-disk: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 8e08d08..c5f22ef 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -617,7 +617,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) */ static int set_multcount(ide_drive_t *drive, int arg) { - struct request rq; + struct request *rq; + int error; if (arg < 0 || arg > drive->id->max_multsect) return -EINVAL; @@ -625,12 +626,13 @@ static int set_multcount(ide_drive_t *drive, int arg) if (drive->special.b.set_multmode) return -EBUSY; - ide_init_drive_cmd(&rq); - rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; drive->mult_req = arg; drive->special.b.set_multmode = 1; - (void)ide_do_drive_cmd(drive, &rq, ide_wait); + error = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); return (drive->mult_count == arg) ? 0 : -EIO; } -- cgit v0.10.2 From 6fe162381e547f457252e68521eb42fd36ec1418 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: ide-floppy: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 7d75240..b10e9a8 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -887,14 +887,16 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_floppy_obj *floppy = drive->driver_data; - struct request rq; + struct request *rq; + int error; - ide_init_drive_cmd(&rq); - rq.buffer = (char *) pc; - rq.cmd_type = REQ_TYPE_SPECIAL; - rq.rq_disk = floppy->disk; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->buffer = (char *) pc; + rq->cmd_type = REQ_TYPE_SPECIAL; + error = blk_execute_rq(drive->queue, floppy->disk, rq, 0); + blk_put_request(rq); - return ide_do_drive_cmd(drive, &rq, ide_wait); + return error; } /* -- cgit v0.10.2 From 154ed280e3f48995d0689b57f10b7063add63019 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: ide-taskfile: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index ab545ff..b6a1c4b 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -492,11 +492,12 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) { - struct request rq; + struct request *rq; + int error; - blk_rq_init(NULL, &rq); - rq.cmd_type = REQ_TYPE_ATA_TASKFILE; - rq.buffer = buf; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; + rq->buffer = buf; /* * (ks) We transfer currently only whole sectors. @@ -504,16 +505,19 @@ int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - rq.hard_nr_sectors = rq.nr_sectors = nsect; - rq.hard_cur_sectors = rq.current_nr_sectors = nsect; + rq->hard_nr_sectors = rq->nr_sectors = nsect; + rq->hard_cur_sectors = rq->current_nr_sectors = nsect; if (task->tf_flags & IDE_TFLAG_WRITE) - rq.cmd_flags |= REQ_RW; + rq->cmd_flags |= REQ_RW; - rq.special = task; - task->rq = &rq; + rq->special = task; + task->rq = rq; - return ide_do_drive_cmd(drive, &rq, ide_wait); + error = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); + + return error; } EXPORT_SYMBOL(ide_raw_taskfile); @@ -739,12 +743,14 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) struct hd_driveid *id = drive->id; if (NULL == (void *) arg) { - struct request rq; + struct request *rq; - ide_init_drive_cmd(&rq); - rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; + err = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); - return ide_do_drive_cmd(drive, &rq, ide_wait); + return err; } if (copy_from_user(args, (void __user *)arg, 4)) -- cgit v0.10.2 From 64ea1b4ab7f51c5de601d291a51508c27d445f70 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: ide-tape: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d67a178..a5f0b77 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1519,12 +1519,16 @@ static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_tape_obj *tape = drive->driver_data; - struct request rq; + struct request *rq; + int error; - idetape_init_rq(&rq, REQ_IDETAPE_PC1); - rq.buffer = (char *) pc; - rq.rq_disk = tape->disk; - return ide_do_drive_cmd(drive, &rq, ide_wait); + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd[0] = REQ_IDETAPE_PC1; + rq->buffer = (char *)pc; + error = blk_execute_rq(drive->queue, tape->disk, rq, 0); + blk_put_request(rq); + return error; } static void idetape_create_load_unload_cmd(ide_drive_t *drive, @@ -1701,26 +1705,33 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) { idetape_tape_t *tape = drive->driver_data; - struct request rq; + struct request *rq; + int ret, errors; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); - idetape_init_rq(&rq, cmd); - rq.rq_disk = tape->disk; - rq.special = (void *)bh; - rq.sector = tape->first_frame; - rq.nr_sectors = blocks; - rq.current_nr_sectors = blocks; - (void) ide_do_drive_cmd(drive, &rq, ide_wait); + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd[0] = cmd; + rq->rq_disk = tape->disk; + rq->special = (void *)bh; + rq->sector = tape->first_frame; + rq->nr_sectors = blocks; + rq->current_nr_sectors = blocks; + blk_execute_rq(drive->queue, tape->disk, rq, 0); + + errors = rq->errors; + ret = tape->blk_size * (blocks - rq->current_nr_sectors); + blk_put_request(rq); if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) return 0; if (tape->merge_bh) idetape_init_merge_buffer(tape); - if (rq.errors == IDETAPE_ERROR_GENERAL) + if (errors == IDETAPE_ERROR_GENERAL) return -EIO; - return (tape->blk_size * (blocks-rq.current_nr_sectors)); + return ret; } static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc) -- cgit v0.10.2 From 9a2d43b7566caeeeb414aa628bc2759028897dbb Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: block: handle blk_pm_resume_request() requests in blk_execute_rq_nowait() For blk_pm_resume_request() requests (which are used only by IDE subsystem currently) the queue is stopped so we need to call ->request_fn explicitly. Thanks to: - Rafael for reporting/bisecting the bug - Borislav/Rafael for testing the fix This is a preparation for converting IDE to use blk_execute_rq(). Cc: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Cc: "Rafael J. Wysocki" Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/block/blk-exec.c b/block/blk-exec.c index 391dd62..4f52f27 100644 --- a/block/blk-exec.c +++ b/block/blk-exec.c @@ -58,6 +58,9 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk, spin_lock_irq(q->queue_lock); __elv_add_request(q, rq, where, 1); __generic_unplug_device(q); + /* the queue is stopped so it won't be plugged+unplugged */ + if (blk_pm_resume_request(rq)) + q->request_fn(q); spin_unlock_irq(q->queue_lock); } EXPORT_SYMBOL_GPL(blk_execute_rq_nowait); -- cgit v0.10.2 From 5b114715ed63f3a4fdf790f5df61364fc4adadf1 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:44 +0200 Subject: ide: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_[head_]wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index c9a0572..8823df1 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -498,7 +498,7 @@ out: int set_pio_mode(ide_drive_t *drive, int arg) { - struct request rq; + struct request *rq; ide_hwif_t *hwif = drive->hwif; const struct ide_port_ops *port_ops = hwif->port_ops; @@ -512,12 +512,15 @@ int set_pio_mode(ide_drive_t *drive, int arg) if (drive->special.b.set_tune) return -EBUSY; - ide_init_drive_cmd(&rq); - rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; drive->tune_req = (u8) arg; drive->special.b.set_tune = 1; - (void) ide_do_drive_cmd(drive, &rq, ide_wait); + + blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); + return 0; } @@ -555,7 +558,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg) { ide_drive_t *drive = dev->driver_data; ide_hwif_t *hwif = HWIF(drive); - struct request rq; + struct request *rq; struct request_pm_state rqpm; ide_task_t args; int ret; @@ -564,18 +567,19 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg) if (!(drive->dn % 2)) ide_acpi_get_timing(hwif); - blk_rq_init(NULL, &rq); memset(&rqpm, 0, sizeof(rqpm)); memset(&args, 0, sizeof(args)); - rq.cmd_type = REQ_TYPE_PM_SUSPEND; - rq.special = &args; - rq.data = &rqpm; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_PM_SUSPEND; + rq->special = &args; + rq->data = &rqpm; rqpm.pm_step = ide_pm_state_start_suspend; if (mesg.event == PM_EVENT_PRETHAW) mesg.event = PM_EVENT_FREEZE; rqpm.pm_state = mesg.event; - ret = ide_do_drive_cmd(drive, &rq, ide_wait); + ret = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); /* only call ACPI _PS3 after both drivers are suspended */ if (!ret && (((drive->dn % 2) && hwif->drives[0].present && hwif->drives[1].present) @@ -589,7 +593,7 @@ static int generic_ide_resume(struct device *dev) { ide_drive_t *drive = dev->driver_data; ide_hwif_t *hwif = HWIF(drive); - struct request rq; + struct request *rq; struct request_pm_state rqpm; ide_task_t args; int err; @@ -602,17 +606,18 @@ static int generic_ide_resume(struct device *dev) ide_acpi_exec_tfs(drive); - blk_rq_init(NULL, &rq); memset(&rqpm, 0, sizeof(rqpm)); memset(&args, 0, sizeof(args)); - rq.cmd_type = REQ_TYPE_PM_RESUME; - rq.cmd_flags |= REQ_PREEMPT; - rq.special = &args; - rq.data = &rqpm; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_PM_RESUME; + rq->cmd_flags |= REQ_PREEMPT; + rq->special = &args; + rq->data = &rqpm; rqpm.pm_step = ide_pm_state_start_resume; rqpm.pm_state = PM_EVENT_ON; - err = ide_do_drive_cmd(drive, &rq, ide_head_wait); + err = blk_execute_rq(drive->queue, NULL, rq, 1); + blk_put_request(rq); if (err == 0 && dev->driver) { ide_driver_t *drv = to_ide_driver(dev->driver); -- cgit v0.10.2 From 5f2e1ceef45ac07d7c52d16de2531a56c453bb0f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:44 +0200 Subject: ide: remove ide_wait/head_wait path in ide_do_drive_cmd Now all the users of ide_do_drive_cmd using ide_wait/head_wait are converted to use blk_execute_rq this removes the ide_wait/head_wait path in ide_do_drive_cmd. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1eb3f5c..29f5cc8 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1584,23 +1584,11 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio { unsigned long flags; ide_hwgroup_t *hwgroup = HWGROUP(drive); - DECLARE_COMPLETION_ONSTACK(wait); - int where = ELEVATOR_INSERT_BACK, err; - int must_wait = (action == ide_wait || action == ide_head_wait); + int where = ELEVATOR_INSERT_BACK; rq->errors = 0; - /* - * we need to hold an extra reference to request for safe inspection - * after completion - */ - if (must_wait) { - rq->ref_count++; - rq->end_io_data = &wait; - rq->end_io = blk_end_sync_rq; - } - - if (action == ide_preempt || action == ide_head_wait) + if (action == ide_preempt) where = ELEVATOR_INSERT_FRONT; spin_lock_irqsave(&ide_lock, flags); @@ -1613,16 +1601,7 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio do_ide_request(drive->queue); spin_unlock_irqrestore(&ide_lock, flags); - err = 0; - if (must_wait) { - wait_for_completion(&wait); - if (rq->errors) - err = -EIO; - - blk_put_request(rq); - } - - return err; + return 0; } EXPORT_SYMBOL(ide_do_drive_cmd); -- cgit v0.10.2 From 124cafc5eb973e748c4ce3dc1caad29274e64613 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:44 +0200 Subject: ide: remove ide_init_drive_cmd ide_init_drive_cmd just calls blk_rq_init. This converts the users of ide_init_drive_cmd to use blk_rq_init directly and removes ide_init_drive_cmd. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 792a3cf..7917cd5 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -193,7 +193,7 @@ void ide_cd_init_rq(ide_drive_t *drive, struct request *rq) { struct cdrom_info *cd = drive->driver_data; - ide_init_drive_cmd(rq); + blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_ATA_PC; rq->rq_disk = cd->disk; } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index b10e9a8..9161cd92 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -286,7 +286,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, { struct ide_floppy_obj *floppy = drive->driver_data; - ide_init_drive_cmd(rq); + blk_rq_init(NULL, rq); rq->buffer = (char *) pc; rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 29f5cc8..d8b4d9f 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1539,23 +1539,6 @@ irqreturn_t ide_intr (int irq, void *dev_id) } /** - * ide_init_drive_cmd - initialize a drive command request - * @rq: request object - * - * Initialize a request before we fill it in and send it down to - * ide_do_drive_cmd. Commands must be set up by this function. Right - * now it doesn't do a lot, but if that changes abusers will have a - * nasty surprise. - */ - -void ide_init_drive_cmd (struct request *rq) -{ - blk_rq_init(NULL, rq); -} - -EXPORT_SYMBOL(ide_init_drive_cmd); - -/** * ide_do_drive_cmd - issue IDE special command * @drive: device to issue command * @rq: request to issue diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 89ecf01..da26180 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -228,7 +228,7 @@ static int idescsi_check_condition(ide_drive_t *drive, kfree(pc); return -ENOMEM; } - ide_init_drive_cmd(rq); + blk_rq_init(NULL, rq); rq->special = (char *) pc; pc->rq = rq; pc->buf = buf; @@ -786,7 +786,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, } } - ide_init_drive_cmd (rq); + blk_rq_init(NULL, rq); rq->special = (char *) pc; rq->cmd_type = REQ_TYPE_SPECIAL; spin_unlock_irq(host->host_lock); diff --git a/include/linux/ide.h b/include/linux/ide.h index eddb6da..3261c66 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -857,8 +857,6 @@ int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); extern ide_startstop_t ide_do_reset (ide_drive_t *); -extern void ide_init_drive_cmd (struct request *rq); - /* * "action" parameter type for ide_do_drive_cmd() below. */ -- cgit v0.10.2 From ed820f19521de246c5b7978f8f78290733a55b20 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:45 +0200 Subject: ide-cd: remove ide_cd_init_rq ide_cd_init_rq is not used by ide-cd_ioctl any more. Only cdrom_queue_request_sense use it. This converts cdrom_queue_request_sense to use blk_rq_init directly and removes ide_cd_init_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 7917cd5..ac542ff 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -188,16 +188,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, ide_cd_log_error(drive->name, failed_command, sense); } -/* Initialize a ide-cd packet command request */ -void ide_cd_init_rq(ide_drive_t *drive, struct request *rq) -{ - struct cdrom_info *cd = drive->driver_data; - - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_ATA_PC; - rq->rq_disk = cd->disk; -} - static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, struct request *failed_command) { @@ -208,7 +198,9 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, sense = &info->sense_data; /* stuff the sense request in front of our current request */ - ide_cd_init_rq(drive, rq); + blk_rq_init(NULL, rq); + rq->cmd_type = REQ_TYPE_ATA_PC; + rq->rq_disk = info->disk; rq->data = sense; rq->cmd[0] = GPCMD_REQUEST_SENSE; diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index df01cfd..fe0ea36 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -143,7 +143,6 @@ struct cdrom_info { void ide_cd_log_error(const char *, struct request *, struct request_sense *); /* ide-cd.c functions used by ide-cd_ioctl.c */ -void ide_cd_init_rq(ide_drive_t *, struct request *); int ide_cd_queue_pc(ide_drive_t *, const unsigned char *, int, void *, unsigned *, struct request_sense *, int, unsigned int); int ide_cd_read_toc(ide_drive_t *, struct request_sense *); -- cgit v0.10.2 From d79c5a670ddf076a346ddcf3d9e21785ecab963f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:45 +0200 Subject: block: convert pd_special_command to use blk_execute_rq pd_special_command uses blk_put_request with struct request on the stack. As a result, blk_put_request needs a hack to catch a NULL request_queue. This converts pd_special_command to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 570f3b7..5fdfa7c 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -712,19 +712,17 @@ static void do_pd_request(struct request_queue * q) static int pd_special_command(struct pd_unit *disk, enum action (*func)(struct pd_unit *disk)) { - DECLARE_COMPLETION_ONSTACK(wait); - struct request rq; + struct request *rq; int err = 0; - blk_rq_init(NULL, &rq); - rq.rq_disk = disk->gd; - rq.end_io_data = &wait; - rq.end_io = blk_end_sync_rq; - blk_insert_request(disk->gd->queue, &rq, 0, func); - wait_for_completion(&wait); - if (rq.errors) - err = -EIO; - blk_put_request(&rq); + rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT); + + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->special = func; + + err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0); + + blk_put_request(rq); return err; } -- cgit v0.10.2 From 52a93ba815737e3877f85b46850cffe993a22429 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:45 +0200 Subject: block: remove the checking for NULL queue in blk_put_request Some uses blk_put_request asymmetrically, that is, they uses it with requests that not allocated by blk_get_request. As a result, blk_put_request has a hack to catch a NULL request_queue. Now such callers are fixed (they use blk_get_request properly). So we can safely remove the hack in blk_put_request. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/block/blk-core.c b/block/blk-core.c index 1905aab..ac83cf9 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1042,15 +1042,9 @@ void blk_put_request(struct request *req) unsigned long flags; struct request_queue *q = req->q; - /* - * Gee, IDE calls in w/ NULL q. Fix IDE and remove the - * following if (q) test. - */ - if (q) { - spin_lock_irqsave(q->queue_lock, flags); - __blk_put_request(q, req); - spin_unlock_irqrestore(q->queue_lock, flags); - } + spin_lock_irqsave(q->queue_lock, flags); + __blk_put_request(q, req); + spin_unlock_irqrestore(q->queue_lock, flags); } EXPORT_SYMBOL(blk_put_request); -- cgit v0.10.2 From 681a561b7ec7fdcd8f35b68e44ac6d6c70aecc04 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:45 +0200 Subject: block: unexport blk_end_sync_rq All the users of blk_end_sync_rq has gone (they are converted to use blk_execute_rq). This unexports blk_end_sync_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/block/blk-exec.c b/block/blk-exec.c index 4f52f27..9bceff7 100644 --- a/block/blk-exec.c +++ b/block/blk-exec.c @@ -18,7 +18,7 @@ * @rq: request to complete * @error: end io status of the request */ -void blk_end_sync_rq(struct request *rq, int error) +static void blk_end_sync_rq(struct request *rq, int error) { struct completion *waiting = rq->end_io_data; @@ -31,7 +31,6 @@ void blk_end_sync_rq(struct request *rq, int error) */ complete(waiting); } -EXPORT_SYMBOL(blk_end_sync_rq); /** * blk_execute_rq_nowait - insert a request into queue for execution diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d2a1b71..1171abd 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -623,7 +623,6 @@ extern void generic_make_request(struct bio *bio); extern void blk_rq_init(struct request_queue *q, struct request *rq); extern void blk_put_request(struct request *); extern void __blk_put_request(struct request_queue *, struct request *); -extern void blk_end_sync_rq(struct request *rq, int error); extern struct request *blk_get_request(struct request_queue *, int, gfp_t); extern void blk_insert_request(struct request_queue *, struct request *, int, void *); extern void blk_requeue_request(struct request_queue *, struct request *); -- cgit v0.10.2 From 30e5ee4d1a651a0c66e86c6612c003034bd20ba2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:46 +0200 Subject: ide: remove obsoleted "idebus=" kernel parameter * Remove obsoleted "idebus=" kernel parameter. * Remove no longer needed ide_system_bus_speed() and system_bus_clock() (together with idebus_parameter and system_bus_speed variables). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 8823df1..f65be73 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -86,9 +86,6 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, IDE6_MAJOR, IDE7_MAJOR, IDE8_MAJOR, IDE9_MAJOR }; -static int idebus_parameter; /* holds the "idebus=" parameter */ -static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ - DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); @@ -189,38 +186,6 @@ static void __init init_ide_data (void) } } -/** - * ide_system_bus_speed - guess bus speed - * - * ide_system_bus_speed() returns what we think is the system VESA/PCI - * bus speed (in MHz). This is used for calculating interface PIO timings. - * The default is 40 for known PCI systems, 50 otherwise. - * The "idebus=xx" parameter can be used to override this value. - * The actual value to be used is computed/displayed the first time - * through. Drivers should only use this as a last resort. - * - * Returns a guessed speed in MHz. - */ - -static int ide_system_bus_speed(void) -{ -#ifdef CONFIG_PCI - static struct pci_device_id pci_default[] = { - { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) }, - { } - }; -#else -#define pci_default 0 -#endif /* CONFIG_PCI */ - - /* user supplied value */ - if (idebus_parameter) - return idebus_parameter; - - /* safe default value for PCI or VESA and PCI*/ - return pci_dev_present(pci_default) ? 33 : 50; -} - void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) { ide_hwgroup_t *hwgroup = hwif->hwgroup; @@ -540,20 +505,6 @@ static int set_unmaskirq(ide_drive_t *drive, int arg) return 0; } -/** - * system_bus_clock - clock guess - * - * External version of the bus clock guess used by very old IDE drivers - * for things like VLB timings. Should not be used. - */ - -int system_bus_clock (void) -{ - return system_bus_speed; -} - -EXPORT_SYMBOL(system_bus_clock); - static int generic_ide_suspend(struct device *dev, pm_message_t mesg) { ide_drive_t *drive = dev->driver_data; @@ -851,7 +802,7 @@ static int __init ide_setup(char *s) if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */ return 0; /* driver and not us */ - if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2)) + if (strncmp(s, "ide", 3) && strncmp(s, "hd", 2)) return 0; printk(KERN_INFO "ide_setup: %s", s); @@ -951,21 +902,6 @@ static int __init ide_setup(char *s) } } - if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e') - goto bad_option; - /* - * Look for bus speed option: "idebus=" - */ - if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') { - if (match_parm(&s[6], NULL, vals, 1) != 1) - goto bad_option; - if (vals[0] >= 20 && vals[0] <= 66) { - idebus_parameter = vals[0]; - } else - printk(" -- BAD BUS SPEED! Expected value from 20 to 66"); - goto obsolete_option; - } - bad_option: printk(" -- BAD OPTION\n"); return 1; @@ -1287,11 +1223,6 @@ static int __init ide_init(void) int ret; printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n"); - system_bus_speed = ide_system_bus_speed(); - - printk(KERN_INFO "ide: Assuming %dMHz system bus speed " - "for PIO modes%s\n", system_bus_speed, - idebus_parameter ? "" : "; override with idebus=xx"); ret = bus_register(&ide_bus_type); if (ret < 0) { diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 90c65cf..052125f 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -116,7 +116,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) int time1, time2; u8 param1, param2, param3, param4; unsigned long flags; - int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; /* calculate timing, according to PIO mode */ time1 = ide_pio_cycle_time(drive, pio); diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 4fe516d..dd6dfb3 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -212,7 +212,7 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) { int active_time, recovery_time; int active_cycles, recovery_cycles; - int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; if (pio) { unsigned int cycle_time; diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 6424af1..51dba82 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -110,7 +110,7 @@ static void qd65xx_select(ide_drive_t *drive) static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time) { - int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + int clk = ide_vlb_clk ? ide_vlb_clk : 50; u8 act_cyc, rec_cyc; if (clk <= 33) { @@ -132,7 +132,7 @@ static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery static u8 qd6580_compute_timing (int active_time, int recovery_time) { - int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + int clk = ide_vlb_clk ? ide_vlb_clk : 50; u8 act_cyc, rec_cyc; act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17); diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 7f46c22..ae7a432 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -140,7 +140,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) { - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; if (bus_speed <= 33) pci_set_drvdata(dev, (void *) aec6xxx_33_base); diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index f2129d5..f2de00ad 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -72,7 +72,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) int s_time, a_time, c_time; u8 s_clc, a_clc, r_clc; unsigned long flags; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; int port = hwif->channel ? 0x5c : 0x58; int portFIFO = hwif->channel ? 0x55 : 0x54; u8 cd_dma_fifo = 0; diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index a373101..ad22220 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -179,7 +179,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, * Determine the system bus clock. */ - amd_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000; + amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; switch (amd_clock) { case 33000: amd_clock = 33333; break; diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index b38a1980..cd1ba14 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -525,12 +525,10 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; int bus_speed; - if (cmd640_vlb && ide_vlb_clk) - bus_speed = ide_vlb_clk; - else if (!cmd640_vlb && ide_pci_clk) - bus_speed = ide_pci_clk; + if (cmd640_vlb) + bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; else - bus_speed = system_bus_clock(); + bus_speed = ide_pci_clk ? ide_pci_clk : 33; if (pio_mode > 5) pio_mode = 5; diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 0867471..ca4774a 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -69,7 +69,7 @@ static u8 quantize_timing(int timing, int quant) static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock()); + int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); u8 cycle_count, active_count, recovery_count, drwtim; static const u8 recovery_values[] = {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; @@ -128,7 +128,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) ide_pio_timings[pio].active_time); setup_count = quantize_timing(ide_pio_timings[pio].setup_time, - 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock())); + 1000 / (ide_pci_clk ? ide_pci_clk : 33)); /* * The primary channel has individual address setup timing registers diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 77cc22c..8c534af 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -134,7 +134,7 @@ static int calc_clk(int time, int bus_speed) static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { int clk1, clk2; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; /* we don't check against CY82C693's min and max speed, * so you can play with the idebus=xx parameter diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index e8c2570..3ed9728a 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -340,7 +340,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const * Determine system bus clock. */ - via_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000; + via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; switch (via_clock) { case 33000: via_clock = 33333; break; diff --git a/include/linux/ide.h b/include/linux/ide.h index 3261c66..dad5356 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -994,8 +994,6 @@ int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long); int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long); int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long); -extern int system_bus_clock(void); - extern int ide_driveid_update(ide_drive_t *); extern int ide_config_drive_speed(ide_drive_t *, u8); extern u8 eighty_ninty_three (ide_drive_t *); -- cgit v0.10.2 From 232595eaff951e96cabe5e85fed35f66b72ff51e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:46 +0200 Subject: ide: remove obsoleted "hdx=" kernel parameters * Remove obsoleted "hdx=" kernel parameters. * Remove no longer used stridx() and match_parm(). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b52f47d..faeea50 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -722,9 +722,6 @@ and is between 256 and 4096 characters. It is defined in the file hd= [EIDE] (E)IDE hard drive subsystem geometry Format: ,, - hd?= [HW] (E)IDE subsystem - hd?lun= See Documentation/ide/ide.txt. - highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact size of . This works even on boxes that have no highmem otherwise. This also works to reduce highmem diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index f65be73..6f600d8 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -722,89 +722,13 @@ set_val: EXPORT_SYMBOL(generic_ide_ioctl); /* - * stridx() returns the offset of c within s, - * or -1 if c is '\0' or not found within s. - */ -static int __init stridx (const char *s, char c) -{ - char *i = strchr(s, c); - return (i && c) ? i - s : -1; -} - -/* - * match_parm() does parsing for ide_setup(): - * - * 1. the first char of s must be '='. - * 2. if the remainder matches one of the supplied keywords, - * the index (1 based) of the keyword is negated and returned. - * 3. if the remainder is a series of no more than max_vals numbers - * separated by commas, the numbers are saved in vals[] and a - * count of how many were saved is returned. Base10 is assumed, - * and base16 is allowed when prefixed with "0x". - * 4. otherwise, zero is returned. - */ -static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals) -{ - static const char *decimal = "0123456789"; - static const char *hex = "0123456789abcdef"; - int i, n; - - if (*s++ == '=') { - /* - * Try matching against the supplied keywords, - * and return -(index+1) if we match one - */ - if (keywords != NULL) { - for (i = 0; *keywords != NULL; ++i) { - if (!strcmp(s, *keywords++)) - return -(i+1); - } - } - /* - * Look for a series of no more than "max_vals" - * numeric values separated by commas, in base10, - * or base16 when prefixed with "0x". - * Return a count of how many were found. - */ - for (n = 0; (i = stridx(decimal, *s)) >= 0;) { - vals[n] = i; - while ((i = stridx(decimal, *++s)) >= 0) - vals[n] = (vals[n] * 10) + i; - if (*s == 'x' && !vals[n]) { - while ((i = stridx(hex, *++s)) >= 0) - vals[n] = (vals[n] * 0x10) + i; - } - if (++n == max_vals) - break; - if (*s == ',' || *s == ';') - ++s; - } - if (!*s) - return n; - } - return 0; /* zero = nothing matched */ -} - -/* * ide_setup() gets called VERY EARLY during initialization, - * to handle kernel "command line" strings beginning with "hdx=" or "ide". + * to handle kernel "command line" strings beginning with "ide". * * Remember to update Documentation/ide/ide.txt if you change something here. */ static int __init ide_setup(char *s) { - ide_hwif_t *hwif; - ide_drive_t *drive; - unsigned int hw, unit; - int vals[3]; - const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1); - - if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */ - return 0; /* driver and not us */ - - if (strncmp(s, "ide", 3) && strncmp(s, "hd", 2)) - return 0; - printk(KERN_INFO "ide_setup: %s", s); init_ide_data (); @@ -842,67 +766,6 @@ static int __init ide_setup(char *s) } #endif /* CONFIG_BLK_DEV_IDEACPI */ - /* - * Look for drive options: "hdx=" - */ - if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { - const char *hd_words[] = { - "none", "noprobe", "nowerr", "cdrom", "nodma", - "-6", "-7", "-8", "-9", "-10", - "noflush", "remap", "remap63", "scsi", NULL }; - unit = s[2] - 'a'; - hw = unit / MAX_DRIVES; - unit = unit % MAX_DRIVES; - hwif = &ide_hwifs[hw]; - drive = &hwif->drives[unit]; - if (strncmp(s + 4, "ide-", 4) == 0) { - strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req)); - goto obsolete_option; - } - switch (match_parm(&s[3], hd_words, vals, 3)) { - case -1: /* "none" */ - case -2: /* "noprobe" */ - drive->noprobe = 1; - goto obsolete_option; - case -3: /* "nowerr" */ - drive->bad_wstat = BAD_R_STAT; - goto obsolete_option; - case -4: /* "cdrom" */ - drive->present = 1; - drive->media = ide_cdrom; - /* an ATAPI device ignores DRDY */ - drive->ready_stat = 0; - goto obsolete_option; - case -5: /* nodma */ - drive->nodma = 1; - goto obsolete_option; - case -11: /* noflush */ - drive->noflush = 1; - goto obsolete_option; - case -12: /* "remap" */ - drive->remap_0_to_1 = 1; - goto obsolete_option; - case -13: /* "remap63" */ - drive->sect0 = 63; - goto obsolete_option; - case -14: /* "scsi" */ - drive->scsi = 1; - goto obsolete_option; - case 3: /* cyl,head,sect */ - drive->media = ide_disk; - drive->ready_stat = READY_STAT; - drive->cyl = drive->bios_cyl = vals[0]; - drive->head = drive->bios_head = vals[1]; - drive->sect = drive->bios_sect = vals[2]; - drive->present = 1; - drive->forced_geom = 1; - goto obsolete_option; - default: - goto bad_option; - } - } - -bad_option: printk(" -- BAD OPTION\n"); return 1; obsolete_option: -- cgit v0.10.2 From dbac9f895f628deebc99dee86dfd21c1823013c3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:46 +0200 Subject: ide: cleanup init_ide_data() * Remove no longer need init_ide_data() call from ide_setup(). * Cleanup init_ide_data(). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 6f600d8..e8c88ff2 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -151,32 +151,9 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) } } -/* - * init_ide_data() sets reasonable default values into all fields - * of all instances of the hwifs and drives, but only on the first call. - * Subsequent calls have no effect (they don't wipe out anything). - * - * This routine is normally called at driver initialization time, - * but may also be called MUCH earlier during kernel "command-line" - * parameter processing. As such, we cannot depend on any other parts - * of the kernel (such as memory allocation) to be functioning yet. - * - * This is too bad, as otherwise we could dynamically allocate the - * ide_drive_t structs as needed, rather than always consuming memory - * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them. - * - * FIXME: We should stuff the setup data into __init and copy the - * relevant hwifs/allocate them properly during boot. - */ -#define MAGIC_COOKIE 0x12345678 static void __init init_ide_data (void) { unsigned int index; - static unsigned long magic_cookie = MAGIC_COOKIE; - - if (magic_cookie != MAGIC_COOKIE) - return; /* already initialized */ - magic_cookie = 0; /* Initialise all interface structures */ for (index = 0; index < MAX_HWIFS; ++index) { @@ -730,7 +707,6 @@ EXPORT_SYMBOL(generic_ide_ioctl); static int __init ide_setup(char *s) { printk(KERN_INFO "ide_setup: %s", s); - init_ide_data (); #ifdef CONFIG_BLK_DEV_IDEDOUBLER if (!strcmp(s, "ide=doubler")) { -- cgit v0.10.2 From 931ee0dc5c69e8113233d21942681ab8fecde7f9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:47 +0200 Subject: ide: remove obsoleted "ide=" kernel parameters * Remove obsoleted "ide=" kernel parameters. * Remove no longer needed: - ide_setup() - parse_options() - __setup("", ...) - module_param(options, ...) * Use module_{init,exit}() for MODULE=y case and remove MODULE ifdef. * Make ide_*acpi* and ide_doubler variables static. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 9d3601f..6f70462 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -60,15 +60,15 @@ struct ide_acpi_hwif_link { #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ -int ide_noacpi; +static int ide_noacpi; module_param_named(noacpi, ide_noacpi, bool, 0); MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); -int ide_acpigtf; +static int ide_acpigtf; module_param_named(acpigtf, ide_acpigtf, bool, 0); MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); -int ide_acpionboot; +static int ide_acpionboot; module_param_named(acpionboot, ide_acpionboot, bool, 0); MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 653b1ad..174f470 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -692,7 +692,7 @@ static int ide_tune_dma(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 speed; - if (noautodma || drive->nodma || (drive->id->capability & 1) == 0) + if (drive->nodma || (drive->id->capability & 1) == 0) return 0; /* consult the list of known "bad" drives */ diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index e8c88ff2..1defba3 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -87,9 +87,9 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, IDE8_MAJOR, IDE9_MAJOR }; DEFINE_MUTEX(ide_cfg_mtx); - __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); -int noautodma = 0; +__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); +EXPORT_SYMBOL(ide_lock); ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ @@ -698,59 +698,6 @@ set_val: EXPORT_SYMBOL(generic_ide_ioctl); -/* - * ide_setup() gets called VERY EARLY during initialization, - * to handle kernel "command line" strings beginning with "ide". - * - * Remember to update Documentation/ide/ide.txt if you change something here. - */ -static int __init ide_setup(char *s) -{ - printk(KERN_INFO "ide_setup: %s", s); - -#ifdef CONFIG_BLK_DEV_IDEDOUBLER - if (!strcmp(s, "ide=doubler")) { - extern int ide_doubler; - - printk(" : Enabled support for IDE doublers\n"); - ide_doubler = 1; - goto obsolete_option; - } -#endif /* CONFIG_BLK_DEV_IDEDOUBLER */ - - if (!strcmp(s, "ide=nodma")) { - printk(" : Prevented DMA\n"); - noautodma = 1; - goto obsolete_option; - } - -#ifdef CONFIG_BLK_DEV_IDEACPI - if (!strcmp(s, "ide=noacpi")) { - //printk(" : Disable IDE ACPI support.\n"); - ide_noacpi = 1; - goto obsolete_option; - } - if (!strcmp(s, "ide=acpigtf")) { - //printk(" : Enable IDE ACPI _GTF support.\n"); - ide_acpigtf = 1; - goto obsolete_option; - } - if (!strcmp(s, "ide=acpionboot")) { - //printk(" : Call IDE ACPI methods on boot.\n"); - ide_acpionboot = 1; - goto obsolete_option; - } -#endif /* CONFIG_BLK_DEV_IDEACPI */ - - printk(" -- BAD OPTION\n"); - return 1; -obsolete_option: - printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n"); - return 1; -} - -EXPORT_SYMBOL(ide_lock); - static int ide_bus_match(struct device *dev, struct device_driver *drv) { return 1; @@ -1087,32 +1034,7 @@ out_port_class: return ret; } -#ifdef MODULE -static char *options = NULL; -module_param(options, charp, 0); -MODULE_LICENSE("GPL"); - -static void __init parse_options (char *line) -{ - char *next = line; - - if (line == NULL || !*line) - return; - while ((line = next) != NULL) { - if ((next = strchr(line,' ')) != NULL) - *next++ = 0; - if (!ide_setup(line)) - printk (KERN_INFO "Unknown option '%s'\n", line); - } -} - -int __init init_module (void) -{ - parse_options(options); - return ide_init(); -} - -void __exit cleanup_module (void) +static void __exit ide_exit(void) { proc_ide_destroy(); @@ -1121,10 +1043,7 @@ void __exit cleanup_module (void) bus_unregister(&ide_bus_type); } -#else /* !MODULE */ - -__setup("", ide_setup); - module_init(ide_init); +module_exit(ide_exit); -#endif /* MODULE */ +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index fed7d81..b789416 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -64,9 +64,7 @@ #define GAYLE_HAS_CONTROL_REG (!ide_doubler) #define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000) -int ide_doubler = 0; /* support IDE doublers? */ -EXPORT_SYMBOL_GPL(ide_doubler); - +static int ide_doubler; module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ diff --git a/include/linux/ide.h b/include/linux/ide.h index dad5356..0fa1812 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -813,10 +813,6 @@ int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsig #ifndef _IDE_C extern ide_hwif_t ide_hwifs[]; /* master data repository */ #endif -extern int ide_noacpi; -extern int ide_acpigtf; -extern int ide_acpionboot; -extern int noautodma; extern int ide_vlb_clk; extern int ide_pci_clk; -- cgit v0.10.2 From 57279a7a401eed844ded4346c5ff512e622ac1de Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:47 +0200 Subject: ide: remove try_to_flush_leftover_data() Just use the new & shiny ide_pad_transfer() helper instead. Also remove the superfluous check for 'drive->media == ide_disk' while at it (ide_ata_error() is used only for ide_disk devices). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index d8b4d9f..c22a337 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -358,31 +358,6 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) EXPORT_SYMBOL(ide_end_drive_cmd); -/** - * try_to_flush_leftover_data - flush junk - * @drive: drive to flush - * - * try_to_flush_leftover_data() is invoked in response to a drive - * unexpectedly having its DRQ_STAT bit set. As an alternative to - * resetting the drive, this routine tries to clear the condition - * by read a sector's worth of data from the drive. Of course, - * this may not help if the drive is *waiting* for data from *us*. - */ -static void try_to_flush_leftover_data (ide_drive_t *drive) -{ - int i = (drive->mult_count ? drive->mult_count : 1) * SECTOR_WORDS; - - if (drive->media != ide_disk) - return; - while (i > 0) { - u32 buffer[16]; - u32 wcount = (i > 16) ? 16 : i; - - i -= wcount; - drive->hwif->input_data(drive, NULL, buffer, wcount * 4); - } -} - static void ide_kill_rq(ide_drive_t *drive, struct request *rq) { if (rq->rq_disk) { @@ -422,8 +397,11 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 } if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && - (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) - try_to_flush_leftover_data(drive); + (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { + int nsect = drive->mult_count ? drive->mult_count : 1; + + ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE); + } if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { ide_kill_rq(drive, rq); -- cgit v0.10.2 From 912ef6d94cc07ce5db19a8ed8953676727d4f30c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:47 +0200 Subject: sgiioc4: use ->extra_base instead of ->dma_status for dma_handle This is a preparation for removal of ->dma_status field from ide_hwif_t. There should be no functional changes caused by this patch. Acked-by: Jeremy Higdon Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 16a0bce..c1b667c 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -369,8 +369,7 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) hwif->sg_max_nents = IOC4_PRD_ENTRIES; pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE, - (dma_addr_t *) &(hwif->dma_status)); - + (dma_addr_t *)&hwif->extra_base); if (pad) { ide_set_hwifdata(hwif, pad); return 0; @@ -439,7 +438,7 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) /* Address of the Ending DMA */ memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE); - ending_dma_addr = cpu_to_le32(hwif->dma_status); + ending_dma_addr = cpu_to_le32(hwif->extra_base); writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4)); writel(dma_direction, (void __iomem *)ioc4_dma_addr); -- cgit v0.10.2 From 49e153e68187454e296f1e03442393f1a3f1d69c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:47 +0200 Subject: ide: remove commented out code from ide_config_drive_speed() Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c2dd20a..2de4c8f 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -744,9 +744,6 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) int error = 0; u8 stat; -// while (HWGROUP(drive)->busy) -// msleep(50); - #ifdef CONFIG_BLK_DEV_IDEDMA if (hwif->dma_ops) /* check if host supports DMA */ hwif->dma_ops->dma_host_set(drive, 0); -- cgit v0.10.2 From e81a3bde13343bc36613aff8f864def7171b376a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:48 +0200 Subject: ide: fix do_probe() to use SELECT_DRIVE() Fix one place in do_probe() which used ->OUTB directly instead of calling SELECT_DRIVE() (so ->selectproc method is also used). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 26e68b6..12513c4 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -478,7 +478,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) printk(KERN_ERR "%s: no response (status = 0x%02x), " "resetting drive\n", drive->name, stat); msleep(50); - hwif->OUTB(drive->select.all, io_ports->device_addr); + SELECT_DRIVE(drive); msleep(50); hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr); (void)ide_busy_sleep(hwif); -- cgit v0.10.2 From 9a410e79b552bacb4481f85618aa7333b7776ed7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:48 +0200 Subject: ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag Always call SELECT_MASK(..., 0) in ide_tf_load() (needs to be done to match ide_set_irq(..., 1)) and then remove IDE_TFLAG_NO_SELECT_MASK taskfile flag. This change should only affect hpt366 and icside host drivers since ->maskproc(..., 0) for sgiioc4 is equivalent to ide_set_irq(..., 1). Cc: Sergei Shtylyov Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ac542ff..0fbc2d8 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -530,8 +530,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, info->dma = !hwif->dma_ops->dma_setup(drive); /* set up the controller registers */ - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL | - IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma); + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL, + xferlen, info->dma); if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) { /* waiting for CDB interrupt, not DMA yet. */ diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index c5f22ef..5f49a4a 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -198,8 +198,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, } memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_NO_SELECT_MASK; /* FIXME? */ - task.tf_flags |= (IDE_TFLAG_TF | IDE_TFLAG_DEVICE); + task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; if (drive->select.b.lba) { if (lba48) { diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 9161cd92..1852008 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -667,8 +667,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) dma = !hwif->dma_ops->dma_setup(drive); - ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | - IDE_TFLAG_OUT_DEVICE, bcount, dma); + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); if (dma) { /* Begin DMA, if necessary */ diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 2de4c8f..9f9916f 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -121,9 +121,7 @@ static void ide_tf_load(ide_drive_t *drive, ide_task_t *task) HIHI = 0xFF; ide_set_irq(drive, 1); - - if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0) - SELECT_MASK(drive, 0); + SELECT_MASK(drive, 0); if (task->tf_flags & IDE_TFLAG_OUT_DATA) { u16 data = (tf->hob_data << 8) | tf->data; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index a5f0b77..cc7991c 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1046,8 +1046,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) dma_ok = !hwif->dma_ops->dma_setup(drive); - ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | - IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); if (dma_ok) /* Will begin DMA later */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index da26180..3222aa5 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -564,7 +564,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, hwif->sg_mapped = 0; } - ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma); + ide_pktcmd_tf_load(drive, 0, bcount, dma); if (dma) pc->flags |= PC_FLAG_DMA_OK; diff --git a/include/linux/ide.h b/include/linux/ide.h index 0fa1812..d4a910c 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -869,7 +869,6 @@ extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); enum { IDE_TFLAG_LBA48 = (1 << 0), - IDE_TFLAG_NO_SELECT_MASK = (1 << 1), IDE_TFLAG_FLAGGED = (1 << 2), IDE_TFLAG_OUT_DATA = (1 << 3), IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4), -- cgit v0.10.2 From ed4af48fd660176680da905817f6e40d51436e4c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:48 +0200 Subject: ide: move IRQ unmasking out from ->tf_load method Move IRQ unmasking out from ->tf_load method to its users. There should be no functional changes caused by this patch (SELECT_MASK() is NOP except for hpt366, icside and sgiioc4). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index ecf53bb..d5afc28 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -52,8 +52,6 @@ static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) HIHI = 0xFF; - ide_set_irq(drive, 1); - if (task->tf_flags & IDE_TFLAG_OUT_DATA) mm_outw((tf->hob_data << 8) | tf->data, io_ports->data_addr); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c22a337..2083cc0 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1579,6 +1579,8 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma) task.tf.lbah = (bcount >> 8) & 0xff; ide_tf_dump(drive->name, &task.tf); + ide_set_irq(drive, 1); + SELECT_MASK(drive, 0); drive->hwif->tf_load(drive, &task); } diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 9f9916f..491980a 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -95,7 +95,7 @@ void SELECT_DRIVE (ide_drive_t *drive) hwif->OUTB(drive->select.all, hwif->io_ports.device_addr); } -static void SELECT_MASK(ide_drive_t *drive, int mask) +void SELECT_MASK(ide_drive_t *drive, int mask) { const struct ide_port_ops *port_ops = drive->hwif->port_ops; @@ -120,9 +120,6 @@ static void ide_tf_load(ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) HIHI = 0xFF; - ide_set_irq(drive, 1); - SELECT_MASK(drive, 0); - if (task->tf_flags & IDE_TFLAG_OUT_DATA) { u16 data = (tf->hob_data << 8) | tf->data; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index b6a1c4b..6a17ab5 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -109,6 +109,8 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { ide_tf_dump(drive->name, tf); + ide_set_irq(drive, 1); + SELECT_MASK(drive, 0); hwif->tf_load(drive, task); } diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 910fb00..37e8cfc 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -662,8 +662,6 @@ static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) HIHI = 0xFF; - ide_set_irq(drive, 1); - if (task->tf_flags & IDE_TFLAG_OUT_DATA) out_be32((void *)io_ports->data_addr, (tf->hob_data << 8) | tf->data); diff --git a/include/linux/ide.h b/include/linux/ide.h index d4a910c..56d0bc2 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -973,6 +973,7 @@ typedef struct ide_task_s { void ide_tf_dump(const char *, struct ide_taskfile *); extern void SELECT_DRIVE(ide_drive_t *); +void SELECT_MASK(ide_drive_t *, int); extern int drive_is_ready(ide_drive_t *); -- cgit v0.10.2 From 135721446144af005109c25eeacca4fdddcd9a66 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:49 +0200 Subject: ide: remove ->mmio flag from ide_hwif_t Since scc_pata host driver no longer uses IDE PCI layer / ide_dma_setup() and all other ->mmio users set also IDE_HFLAG_MMIO host flag we can safely remove ->mmio flag. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 74a05dc..3839f57 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -405,7 +405,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; default_hwif_mmiops(hwif); idx[0] = i; diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 174f470..7ee44f8 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -463,7 +463,7 @@ int ide_dma_setup(ide_drive_t *drive) } /* PRD table */ - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) writel(hwif->dmatable_dma, (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS)); else diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 37e8cfc..133053c 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -793,7 +793,6 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) hwif->dma_base = dma_base; hwif->config_data = ports->ctl; - hwif->mmio = 1; } /** diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 0006b9e..b75e9bb 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -94,7 +94,7 @@ static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) unsigned long base = (unsigned long)hwif->hwif_data; base += 0xA0 + r; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) base += hwif->channel << 6; else base += hwif->channel << 4; @@ -117,7 +117,7 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) unsigned long base = (unsigned long)hwif->hwif_data; base += 0xA0 + r; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) base += hwif->channel << 6; else base += hwif->channel << 4; @@ -190,7 +190,9 @@ static u8 sil_pata_udma_filter(ide_drive_t *drive) unsigned long base = (unsigned long)hwif->hwif_data; u8 scsc, mask = 0; - scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A)); + base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A; + + scsc = sil_ioread8(dev, base); switch (scsc & 0x30) { case 0x10: /* 133 */ @@ -238,8 +240,9 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) unsigned long tfaddr = siimage_selreg(hwif, 0x02); unsigned long base = (unsigned long)hwif->hwif_data; u8 tf_pio = pio; - u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84) - : (hwif->mmio ? 0xB4 : 0x80); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) + : (mmio ? 0xB4 : 0x80); u8 mode = 0; u8 unit = drive->select.b.unit; @@ -290,13 +293,13 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) u16 ultra = 0, multi = 0; u8 mode = 0, unit = drive->select.b.unit; unsigned long base = (unsigned long)hwif->hwif_data; - u8 scsc = 0, addr_mask = hwif->channel ? - (hwif->mmio ? 0xF4 : 0x84) : - (hwif->mmio ? 0xB4 : 0x80); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) + : (mmio ? 0xB4 : 0x80); unsigned long ma = siimage_seldev(drive, 0x08); unsigned long ua = siimage_seldev(drive, 0x0C); - scsc = sil_ioread8 (dev, base + (hwif->mmio ? 0x4A : 0x8A)); + scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); mode = sil_ioread8 (dev, base + addr_mask); multi = sil_ioread16(dev, ma); ultra = sil_ioread16(dev, ua); @@ -391,7 +394,7 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive) static int siimage_dma_test_irq(ide_drive_t *drive) { - if (drive->hwif->mmio) + if (drive->hwif->host_flags & IDE_HFLAG_MMIO) return siimage_mmio_dma_test_irq(drive); else return siimage_io_dma_test_irq(drive); @@ -640,8 +643,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) hwif->irq = dev->irq; hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00); - - hwif->mmio = 1; } static int is_dev_seagate_sata(ide_drive_t *drive) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 5171601..abcfb17 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -87,7 +87,7 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) unsigned long dma_base = 0; u8 dma_stat = 0; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) return hwif->dma_base; if (hwif->mate && hwif->mate->dma_base) { @@ -374,7 +374,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) if (base == 0 || ide_pci_set_master(dev, d->name) < 0) return -1; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); else printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", diff --git a/include/linux/ide.h b/include/linux/ide.h index 56d0bc2..b01b102 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -532,7 +532,6 @@ typedef struct hwif_s { unsigned serialized : 1; /* serialized all channel operation */ unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ - unsigned mmio : 1; /* host uses MMIO */ struct device gendev; struct device *portdev; -- cgit v0.10.2 From f8c4bd0ab2b8783c0f080957781e9f70bee48eaa Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:49 +0200 Subject: ide: pass 'hwif *' instead of 'drive *' to ->OUTBSYNC method There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 2083cc0..c28fcdf 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -437,7 +437,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE, + hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr); if (rq->errors >= ERROR_MAX) { diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 491980a..4c32cf0 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -42,7 +42,7 @@ static void ide_outb (u8 val, unsigned long port) outb(val, port); } -static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port) +static void ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port) { outb(addr, port); } @@ -68,7 +68,7 @@ static void ide_mm_outb (u8 value, unsigned long port) writeb(value, (void __iomem *) port); } -static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port) +static void ide_mm_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port) { writeb(value, (void __iomem *) port); } @@ -686,7 +686,7 @@ int ide_driveid_update(ide_drive_t *drive) SELECT_MASK(drive, 1); ide_set_irq(drive, 0); msleep(50); - hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, WIN_IDENTIFY, hwif->io_ports.command_addr); timeout = jiffies + WAIT_WORSTCASE; do { if (time_after(jiffies, timeout)) { @@ -773,7 +773,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) ide_set_irq(drive, 0); hwif->OUTB(speed, io_ports->nsect_addr); hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr); - hwif->OUTBSYNC(drive, WIN_SETFEATURES, io_ports->command_addr); + hwif->OUTBSYNC(hwif, WIN_SETFEATURES, io_ports->command_addr); if (drive->quirk_list == 2) ide_set_irq(drive, 1); @@ -881,7 +881,7 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, spin_lock_irqsave(&ide_lock, flags); __ide_set_handler(drive, handler, timeout, expiry); - hwif->OUTBSYNC(drive, cmd, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr); /* * Drive takes 400nS to respond, we must avoid the IRQ being * serviced before that. @@ -899,7 +899,7 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) unsigned long flags; spin_lock_irqsave(&ide_lock, flags); - hwif->OUTBSYNC(drive, WIN_PACKETCMD, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, WIN_PACKETCMD, hwif->io_ports.command_addr); ndelay(400); spin_unlock_irqrestore(&ide_lock, flags); } @@ -1094,7 +1094,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) pre_reset(drive); SELECT_DRIVE(drive); udelay (20); - hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr); + hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr); ndelay(400); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; hwgroup->polling = 1; @@ -1125,14 +1125,14 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * recover from reset very quickly, saving us the first 50ms wait time. */ /* set SRST and nIEN */ - hwif->OUTBSYNC(drive, drive->ctl|6, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, drive->ctl | 6, io_ports->ctl_addr); /* more than enough time */ udelay(10); if (drive->quirk_list == 2) ctl = drive->ctl; /* clear SRST and nIEN */ else ctl = drive->ctl | 2; /* clear SRST, leave nIEN */ - hwif->OUTBSYNC(drive, ctl, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr); /* more than enough time */ udelay(10); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 12513c4..b010633 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -293,7 +293,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) hwif->OUTB(0, io_ports->feature_addr); /* ask drive for ID */ - hwif->OUTBSYNC(drive, cmd, io_ports->command_addr); + hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr); timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; timeout += jiffies; @@ -480,7 +480,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) msleep(50); SELECT_DRIVE(drive); msleep(50); - hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr); + hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr); (void)ide_busy_sleep(hwif); rc = try_to_identify(drive, cmd); } @@ -516,7 +516,7 @@ static void enable_nest (ide_drive_t *drive) printk("%s: enabling %s -- ", hwif->name, drive->id->model); SELECT_DRIVE(drive); msleep(50); - hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr); if (ide_busy_sleep(hwif)) { printk(KERN_CONT "failed (timeout)\n"); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 6a17ab5..cf55a48 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -117,7 +117,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) switch (task->data_phase) { case TASKFILE_MULTI_OUT: case TASKFILE_OUT: - hwif->OUTBSYNC(drive, tf->command, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, tf->command, hwif->io_ports.command_addr); ndelay(400); /* FIXME */ return pre_task_out_intr(drive, task->rq); case TASKFILE_MULTI_IN: diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 133053c..32eb087 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -148,11 +148,8 @@ static void scc_ide_outb(u8 addr, unsigned long port) out_be32((void*)port, addr); } -static void -scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port) +static void scc_ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port) { - ide_hwif_t *hwif = HWIF(drive); - out_be32((void*)port, addr); eieio(); in_be32((void*)(hwif->dma_base + 0x01c)); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index ba2d587..dcb2c46 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -480,13 +480,13 @@ pmac_ide_do_update_timings(ide_drive_t *drive) pmac_ide_selectproc(drive); } -static void -pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port) +static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port) { u32 tmp; writeb(value, (void __iomem *) port); - tmp = readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); + tmp = readl((void __iomem *)(hwif->io_ports.data_addr + + IDE_TIMING_CONFIG)); } /* diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 3222aa5..d7fd5e5 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -257,7 +257,7 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE, + hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr); rq->errors++; diff --git a/include/linux/ide.h b/include/linux/ide.h index b01b102..1c34314 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -493,7 +493,7 @@ typedef struct hwif_s { void (*ide_dma_clear_irq)(ide_drive_t *drive); void (*OUTB)(u8 addr, unsigned long port); - void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port); + void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port); u8 (*INB)(unsigned long port); -- cgit v0.10.2 From 6a732e11be1355baeeca7c47f19ab20e7baa6ce7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:50 +0200 Subject: ide: use ->OUTBSYNC in init_irq() Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index b010633..809362b 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1065,7 +1065,7 @@ static int init_irq (ide_hwif_t *hwif) if (io_ports->ctl_addr) /* clear nIEN */ - hwif->OUTB(0x08, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, 0x08, io_ports->ctl_addr); if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup)) goto out_unlink; -- cgit v0.10.2 From 0fd04dcc2ebb6ec9088c24b368b0ce1f42a98ef5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:50 +0200 Subject: ide: use ->OUTBSYNC in ide_set_irq() Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/include/linux/ide.h b/include/linux/ide.h index 1c34314..4d1c971 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1340,7 +1340,8 @@ static inline void ide_set_irq(ide_drive_t *drive, int on) { ide_hwif_t *hwif = drive->hwif; - hwif->OUTB(drive->ctl | (on ? 0 : 2), hwif->io_ports.ctl_addr); + hwif->OUTBSYNC(hwif, drive->ctl | (on ? 0 : 2), + hwif->io_ports.ctl_addr); } static inline u8 ide_read_status(ide_drive_t *drive) -- cgit v0.10.2 From ff07488346702f554aaeb6aae982540aa0302373 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:50 +0200 Subject: ide: remove drive->ctl Remove drive->ctl (it is always equal to 0x08 after init time). While at it: * Use ATA_DEVCTL_OBS define. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index d5afc28..ae37ee5 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -96,7 +96,7 @@ static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task) } /* be sure we're looking at the low order bits */ - outb(drive->ctl & ~0x80, io_ports->ctl_addr); + outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) tf->nsect = inb(io_ports->nsect_addr); @@ -110,7 +110,7 @@ static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task) tf->device = inb(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - outb(drive->ctl | 0x80, io_ports->ctl_addr); + outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) tf->hob_feature = inb(io_ports->feature_addr); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 4c32cf0..80ad4f2 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -186,7 +186,7 @@ static void ide_tf_read(ide_drive_t *drive, ide_task_t *task) } /* be sure we're looking at the low order bits */ - tf_outb(drive->ctl & ~0x80, io_ports->ctl_addr); + tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) tf->nsect = tf_inb(io_ports->nsect_addr); @@ -200,7 +200,7 @@ static void ide_tf_read(ide_drive_t *drive, ide_task_t *task) tf->device = tf_inb(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - tf_outb(drive->ctl | 0x80, io_ports->ctl_addr); + tf_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) tf->hob_feature = tf_inb(io_ports->feature_addr); @@ -1125,13 +1125,13 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * recover from reset very quickly, saving us the first 50ms wait time. */ /* set SRST and nIEN */ - hwif->OUTBSYNC(hwif, drive->ctl | 6, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr); /* more than enough time */ udelay(10); if (drive->quirk_list == 2) - ctl = drive->ctl; /* clear SRST and nIEN */ + ctl = ATA_DEVCTL_OBS; /* clear SRST and nIEN */ else - ctl = drive->ctl | 2; /* clear SRST, leave nIEN */ + ctl = ATA_DEVCTL_OBS | 2; /* clear SRST, leave nIEN */ hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr); /* more than enough time */ udelay(10); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 809362b..d21e51a 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1065,7 +1065,7 @@ static int init_irq (ide_hwif_t *hwif) if (io_ports->ctl_addr) /* clear nIEN */ - hwif->OUTBSYNC(hwif, 0x08, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS, io_ports->ctl_addr); if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup)) goto out_unlink; diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 1defba3..2b84535 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -136,7 +136,6 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) drive->media = ide_disk; drive->select.all = (unit<<4)|0xa0; drive->hwif = hwif; - drive->ctl = 0x08; drive->ready_stat = READY_STAT; drive->bad_wstat = BAD_W_STAT; drive->special.b.recalibrate = 1; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index c929dad..397c6cb 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -759,8 +759,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) enable_irq (hwif->irq); } } else - outb(mask ? (drive->ctl | 2) : (drive->ctl & ~2), - hwif->io_ports.ctl_addr); + outb(ATA_DEVCTL_OBS | (mask ? 2 : 0), hwif->io_ports.ctl_addr); } /* diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index a7a41bb..45ba71a 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -76,7 +76,7 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task) } /* be sure we're looking at the low order bits */ - outb(drive->ctl & ~0x80, io_ports->ctl_addr); + outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) tf->nsect = inb(io_ports->nsect_addr); @@ -90,7 +90,7 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task) tf->device = superio_ide_inb(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - outb(drive->ctl | 0x80, io_ports->ctl_addr); + outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) tf->hob_feature = inb(io_ports->feature_addr); diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 32eb087..1584ebb 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -703,7 +703,7 @@ static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) } /* be sure we're looking at the low order bits */ - scc_ide_outb(drive->ctl & ~0x80, io_ports->ctl_addr); + scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) tf->nsect = scc_ide_inb(io_ports->nsect_addr); @@ -717,7 +717,7 @@ static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) tf->device = scc_ide_inb(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - scc_ide_outb(drive->ctl | 0x80, io_ports->ctl_addr); + scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) tf->hob_feature = scc_ide_inb(io_ports->feature_addr); diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index c1b667c..24513e3d 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -111,7 +111,7 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, static void sgiioc4_maskproc(ide_drive_t * drive, int mask) { - writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2), + writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0), (void __iomem *)drive->hwif->io_ports.ctl_addr); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 4d1c971..d8c86f0 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -364,7 +364,6 @@ typedef struct ide_drive_s { u8 wcache; /* status of write cache */ u8 acoustic; /* acoustic management */ u8 media; /* disk, cdrom, tape, floppy, ... */ - u8 ctl; /* "normal" value for Control register */ u8 ready_stat; /* min status value for drive ready */ u8 mult_count; /* current multiple sector setting */ u8 mult_req; /* requested multiple sector setting */ @@ -1340,7 +1339,7 @@ static inline void ide_set_irq(ide_drive_t *drive, int on) { ide_hwif_t *hwif = drive->hwif; - hwif->OUTBSYNC(hwif, drive->ctl | (on ? 0 : 2), + hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2), hwif->io_ports.ctl_addr); } -- cgit v0.10.2 From 7e12ca11d65f4cb29ed58ea3948f8c5d4f57b35e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:50 +0200 Subject: ide-scsi: replace ide_do_drive_cmd with blk_execute_rq_nowait All the callers of ide_do_drive_cmd() except for ide-scsi use ide_preempt action argument. This converts ide-scsi to use blk_execute_rq_nowait instead of ide_do_drive_cmd so that we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index d7fd5e5..58e30ef 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -790,8 +790,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, rq->special = (char *) pc; rq->cmd_type = REQ_TYPE_SPECIAL; spin_unlock_irq(host->host_lock); - rq->rq_disk = scsi->disk; - (void) ide_do_drive_cmd (drive, rq, ide_end); + blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL); spin_lock_irq(host->host_lock); return 0; abort: -- cgit v0.10.2 From 63f5abb0959337db0d5bece9cefba03cdcadec51 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:51 +0200 Subject: ide: remove action argument in ide_do_drive_cmd ide_do_drive_cmd is called only with ide_preempt action argument. So we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. This patch also includes two minor cleanups: 1) ide_do_drive_cmd always succeeds so we don't need the return value; 2) the callers use blk_rq_init before ide_do_drive_cmd so there is no need to initialize rq->errors. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 0fbc2d8..043129c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -213,7 +213,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, /* NOTE! Save the failed command in "rq->buffer" */ rq->buffer = (void *) failed_command; - (void) ide_do_drive_cmd(drive, rq, ide_preempt); + ide_do_drive_cmd(drive, rq); } static void cdrom_end_request(ide_drive_t *drive, int uptodate) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 1852008..53209a4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -291,7 +291,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; rq->rq_disk = floppy->disk; - (void) ide_do_drive_cmd(drive, rq, ide_preempt); + ide_do_drive_cmd(drive, rq); } static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c28fcdf..2805774 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1520,49 +1520,27 @@ irqreturn_t ide_intr (int irq, void *dev_id) * ide_do_drive_cmd - issue IDE special command * @drive: device to issue command * @rq: request to issue - * @action: action for processing * * This function issues a special IDE device request * onto the request queue. * - * If action is ide_wait, then the rq is queued at the end of the - * request queue, and the function sleeps until it has been processed. - * This is for use when invoked from an ioctl handler. - * - * If action is ide_preempt, then the rq is queued at the head of - * the request queue, displacing the currently-being-processed - * request and this function returns immediately without waiting - * for the new rq to be completed. This is VERY DANGEROUS, and is - * intended for careful use by the ATAPI tape/cdrom driver code. - * - * If action is ide_end, then the rq is queued at the end of the - * request queue, and the function returns immediately without waiting - * for the new rq to be completed. This is again intended for careful - * use by the ATAPI tape/cdrom driver code. + * the rq is queued at the head of the request queue, displacing + * the currently-being-processed request and this function + * returns immediately without waiting for the new rq to be + * completed. This is VERY DANGEROUS, and is intended for + * careful use by the ATAPI tape/cdrom driver code. */ - -int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t action) + +void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq) { unsigned long flags; ide_hwgroup_t *hwgroup = HWGROUP(drive); - int where = ELEVATOR_INSERT_BACK; - - rq->errors = 0; - - if (action == ide_preempt) - where = ELEVATOR_INSERT_FRONT; spin_lock_irqsave(&ide_lock, flags); - if (action == ide_preempt) - hwgroup->rq = NULL; - __elv_add_request(drive->queue, rq, where, 1); + hwgroup->rq = NULL; + __elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 1); __generic_unplug_device(drive->queue); - /* the queue is stopped so it won't be plugged+unplugged */ - if (blk_pm_resume_request(rq)) - do_ide_request(drive->queue); spin_unlock_irqrestore(&ide_lock, flags); - - return 0; } EXPORT_SYMBOL(ide_do_drive_cmd); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cc7991c..a562df8 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -691,7 +691,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, rq->cmd_flags |= REQ_PREEMPT; rq->buffer = (char *) pc; rq->rq_disk = tape->disk; - (void) ide_do_drive_cmd(drive, rq, ide_preempt); + ide_do_drive_cmd(drive, rq); } /* diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 58e30ef..569ffde 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -245,7 +245,8 @@ static int idescsi_check_condition(ide_drive_t *drive, ide_scsi_hex_dump(pc->c, 6); } rq->rq_disk = scsi->disk; - return ide_do_drive_cmd(drive, rq, ide_preempt); + ide_do_drive_cmd(drive, rq); + return 0; } static int idescsi_end_request(ide_drive_t *, int, int); diff --git a/include/linux/ide.h b/include/linux/ide.h index d8c86f0..04267dc 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -851,17 +851,7 @@ int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); extern ide_startstop_t ide_do_reset (ide_drive_t *); -/* - * "action" parameter type for ide_do_drive_cmd() below. - */ -typedef enum { - ide_wait, /* insert rq at end of list, and wait for it */ - ide_preempt, /* insert rq in front of current request */ - ide_head_wait, /* insert rq in front of current request and wait for it */ - ide_end /* insert rq at end of list, but don't wait for it */ -} ide_action_t; - -extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t); +extern void ide_do_drive_cmd(ide_drive_t *, struct request *); extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); -- cgit v0.10.2 From b3d96afccf8b5c67b66a61efb88c53ff029c6611 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:51 +0200 Subject: ide-scsi: fix race in idescsi_transfer_pc() Start DMA engine before sending content of packet command (otherwise it is possible that IRQ will happen before DMA engine is started). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 569ffde..2553ef4 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -494,13 +494,14 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) /* Set the interrupt routine */ ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - /* Send the actual packet */ - hwif->output_data(drive, NULL, scsi->pc->c, 12); - if (pc->flags & PC_FLAG_DMA_OK) { pc->flags |= PC_FLAG_DMA_IN_PROGRESS; hwif->dma_ops->dma_start(drive); } + + /* Send the actual packet */ + hwif->output_data(drive, NULL, scsi->pc->c, 12); + return ide_started; } -- cgit v0.10.2 From e8e25f03e19c2c47834c821511625c0b80567827 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:51 +0200 Subject: ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr() If DRQ bit of Status Register is not cleared it is an error condition and should be handled accordingly (disable DMA + reset the device). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 2553ef4..e67cf8a 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -388,7 +388,6 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; #if IDESCSI_DEBUG_LOG printk ("ide-scsi: %s: DMA complete\n", drive->name); #endif /* IDESCSI_DEBUG_LOG */ @@ -404,12 +403,20 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) printk(KERN_INFO "Packet command completed, %d bytes" " transferred\n", pc->xferred); + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); if (stat & ERR_STAT) rq->errors++; idescsi_end_request (drive, 1, 0); return ide_stopped; } + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; + printk(KERN_ERR "%s: The device wants to issue more interrupts " + "in DMA mode\n", drive->name); + ide_dma_off(drive); + return ide_do_reset(drive); + } bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | hwif->INB(hwif->io_ports.lbam_addr); ireason = hwif->INB(hwif->io_ports.nsect_addr); -- cgit v0.10.2 From c04bbc812b05b304a9118687d0e0a47e35f00d1d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:51 +0200 Subject: ide-scsi: fix handling of DMA errors in idescsi_pc_intr() Check return value of ->dma_end method and if there was a DMA error handle it accordingly (set PC_FLAG_DMA_ERROR pc flag, don't update pc->xferred and increase rq->errors). Also move debug message in the right place while at it. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index e67cf8a..ed92cf7 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -388,11 +388,13 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + if (hwif->dma_ops->dma_end(drive)) + pc->flags |= PC_FLAG_DMA_ERROR; + else + pc->xferred = pc->req_xfer; #if IDESCSI_DEBUG_LOG printk ("ide-scsi: %s: DMA complete\n", drive->name); #endif /* IDESCSI_DEBUG_LOG */ - pc->xferred = pc->req_xfer; - (void)hwif->dma_ops->dma_end(drive); } /* Clear the interrupt */ @@ -405,7 +407,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) " transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); - if (stat & ERR_STAT) + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) rq->errors++; idescsi_end_request (drive, 1, 0); return ide_stopped; -- cgit v0.10.2 From 6c60bd8ea7aa536d67830bc8384ef0ebdfb8aad4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:52 +0200 Subject: ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr() Set PC_FLAG_WRITING pc flag in idescsi_queue() (if needed) and then fix Interrupt Reason checking in idescsi_pc_intr(). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index ed92cf7..0880707 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -427,7 +427,15 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); return ide_do_reset (drive); } - if (ireason & IO) { + if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { + /* Hopefully, we will never get here */ + printk(KERN_ERR "%s: We wanted to %s, but the device wants us " + "to %s!\n", drive->name, + (ireason & IO) ? "Write" : "Read", + (ireason & IO) ? "Read" : "Write"); + return ide_do_reset(drive); + } + if (!(pc->flags & PC_FLAG_WRITING)) { temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { @@ -436,7 +444,6 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) "- discarding data\n"); temp = pc->buf_size - pc->xferred; if (temp) { - pc->flags &= ~PC_FLAG_WRITING; if (pc->sg) idescsi_input_buffers(drive, pc, temp); @@ -457,15 +464,11 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n"); #endif /* IDESCSI_DEBUG_LOG */ } - } - if (ireason & IO) { - pc->flags &= ~PC_FLAG_WRITING; if (pc->sg) idescsi_input_buffers(drive, pc, bcount); else hwif->input_data(drive, NULL, pc->cur_pos, bcount); } else { - pc->flags |= PC_FLAG_WRITING; if (pc->sg) idescsi_output_buffers(drive, pc, bcount); else @@ -777,6 +780,8 @@ static int idescsi_queue (struct scsi_cmnd *cmd, memset (pc->c, 0, 12); pc->flags = 0; + if (cmd->sc_data_direction == DMA_TO_DEVICE) + pc->flags |= PC_FLAG_WRITING; pc->rq = rq; memcpy (pc->c, cmd->cmnd, cmd->cmd_len); pc->buf = NULL; -- cgit v0.10.2 From 3e52fb4d1f4cc9630422982b6c5fa571e30f9889 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:52 +0200 Subject: ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers() * Merge idescsi_input_buffers() and idescsi_output_buffers() into ide_scsi_io_buffers() helper. While at it: * Log device name instead of driver name on error. * Use xfer_func_t. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 0880707..36c2c3b 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -129,51 +129,15 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive) #define IDESCSI_PC_RQ 90 /* - * PIO data transfer routines using the scatter gather table. + * PIO data transfer routine using the scatter gather table. */ -static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) +static void ide_scsi_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned int bcount, int write) { ide_hwif_t *hwif = drive->hwif; - int count; + xfer_func_t *xf = write ? hwif->output_data : hwif->input_data; char *buf; - - while (bcount) { - count = min(pc->sg->length - pc->b_count, bcount); - if (PageHighMem(sg_page(pc->sg))) { - unsigned long flags; - - local_irq_save(flags); - buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) + - pc->sg->offset; - hwif->input_data(drive, NULL, buf + pc->b_count, count); - kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = sg_virt(pc->sg); - hwif->input_data(drive, NULL, buf + pc->b_count, count); - } - bcount -= count; pc->b_count += count; - if (pc->b_count == pc->sg->length) { - if (!--pc->sg_cnt) - break; - pc->sg = sg_next(pc->sg); - pc->b_count = 0; - } - } - - if (bcount) { - printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n"); - ide_pad_transfer(drive, 0, bcount); - } -} - -static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - ide_hwif_t *hwif = drive->hwif; int count; - char *buf; while (bcount) { count = min(pc->sg->length - pc->b_count, bcount); @@ -182,13 +146,13 @@ static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, local_irq_save(flags); buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) + - pc->sg->offset; - hwif->output_data(drive, NULL, buf + pc->b_count, count); + pc->sg->offset; + xf(drive, NULL, buf + pc->b_count, count); kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); local_irq_restore(flags); } else { buf = sg_virt(pc->sg); - hwif->output_data(drive, NULL, buf + pc->b_count, count); + xf(drive, NULL, buf + pc->b_count, count); } bcount -= count; pc->b_count += count; if (pc->b_count == pc->sg->length) { @@ -200,8 +164,10 @@ static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, } if (bcount) { - printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n"); - ide_pad_transfer(drive, 1, bcount); + printk(KERN_ERR "%s: scatter gather table too small, %s\n", + drive->name, write ? "padding with zeros" + : "discarding data"); + ide_pad_transfer(drive, write, bcount); } } @@ -370,6 +336,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; struct ide_atapi_pc *pc = scsi->pc; struct request *rq = pc->rq; + xfer_func_t *xferfunc; unsigned int temp; u16 bcount; u8 stat, ireason; @@ -445,8 +412,8 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) temp = pc->buf_size - pc->xferred; if (temp) { if (pc->sg) - idescsi_input_buffers(drive, pc, - temp); + ide_scsi_io_buffers(drive, pc, + temp, 0); else hwif->input_data(drive, NULL, pc->cur_pos, temp); @@ -464,16 +431,16 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n"); #endif /* IDESCSI_DEBUG_LOG */ } - if (pc->sg) - idescsi_input_buffers(drive, pc, bcount); - else - hwif->input_data(drive, NULL, pc->cur_pos, bcount); - } else { - if (pc->sg) - idescsi_output_buffers(drive, pc, bcount); - else - hwif->output_data(drive, NULL, pc->cur_pos, bcount); - } + xferfunc = hwif->input_data; + } else + xferfunc = hwif->output_data; + + if (pc->sg) + ide_scsi_io_buffers(drive, pc, bcount, + !!(pc->flags & PC_FLAG_WRITING)); + else + xferfunc(drive, NULL, pc->cur_pos, bcount); + /* Update the current position */ pc->xferred += bcount; pc->cur_pos += bcount; -- cgit v0.10.2 From c8c51129805c0efb32f34afd3af8fe94f5757363 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:52 +0200 Subject: ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc() ide_set_handler() bugs on ->handler == NULL so no need to do it in idescsi_transfer_pc(). There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 36c2c3b..e9d3dbf 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -469,7 +469,7 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) "issuing a packet command\n"); return ide_do_reset (drive); } - BUG_ON(HWGROUP(drive)->handler != NULL); + /* Set the interrupt routine */ ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); -- cgit v0.10.2 From 43a2b5b29385a3e0997a47c86f286d3645e5cb44 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:52 +0200 Subject: ide-scsi: add debug_log() macro Add debug_log() macro and convert the driver to use it. [ This makes debug messages to be always prefixed with "ide-scsi: " and use KERN_INFO level. ] While at it: * Change "DMA complete" debug message to "DMA finished" to match other ATAPI device drivers. * Use __func__. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index e9d3dbf..d2dad90 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -60,6 +60,13 @@ #define IDESCSI_DEBUG_LOG 0 +#if IDESCSI_DEBUG_LOG +#define debug_log(fmt, args...) \ + printk(KERN_INFO "ide-scsi: " fmt, ## args) +#else +#define debug_log(fmt, args...) do {} while (0) +#endif + /* * SCSI command transformation layer */ @@ -237,10 +244,9 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) static ide_startstop_t idescsi_atapi_abort(ide_drive_t *drive, struct request *rq) { -#if IDESCSI_DEBUG_LOG - printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n", + debug_log("%s called for %lu\n", __func__, ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number); -#endif + rq->errors |= ERROR_MAX; idescsi_end_request(drive, 0, 0); @@ -319,9 +325,9 @@ static int idescsi_expiry(ide_drive_t *drive) idescsi_scsi_t *scsi = drive_to_idescsi(drive); struct ide_atapi_pc *pc = scsi->pc; -#if IDESCSI_DEBUG_LOG - printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies); -#endif + debug_log("%s called for %lu at %lu\n", __func__, + pc->scsi_cmd->serial_number, jiffies); + pc->flags |= PC_FLAG_TIMEDOUT; return 0; /* we do not want the ide subsystem to retry */ @@ -341,15 +347,11 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) u16 bcount; u8 stat, ireason; -#if IDESCSI_DEBUG_LOG - printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n"); -#endif /* IDESCSI_DEBUG_LOG */ + debug_log("Reached %s interrupt handler\n", __func__); if (pc->flags & PC_FLAG_TIMEDOUT) { -#if IDESCSI_DEBUG_LOG - printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n", - pc->scsi_cmd->serial_number, jiffies); -#endif + debug_log("%s: got timed out packet %lu at %lu\n", __func__, + pc->scsi_cmd->serial_number, jiffies); /* end this request now - scsi should retry it*/ idescsi_end_request (drive, 1, 0); return ide_stopped; @@ -359,9 +361,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) pc->flags |= PC_FLAG_DMA_ERROR; else pc->xferred = pc->req_xfer; -#if IDESCSI_DEBUG_LOG - printk ("ide-scsi: %s: DMA complete\n", drive->name); -#endif /* IDESCSI_DEBUG_LOG */ + debug_log("%s: DMA finished\n", drive->name); } /* Clear the interrupt */ @@ -427,9 +427,8 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); return ide_started; } -#if IDESCSI_DEBUG_LOG - printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n"); -#endif /* IDESCSI_DEBUG_LOG */ + debug_log("The scsi wants to send us more data than " + "expected - allowing transfer\n"); } xferfunc = hwif->input_data; } else @@ -566,10 +565,10 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, */ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block) { -#if IDESCSI_DEBUG_LOG - printk (KERN_INFO "dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,rq->cmd[0],rq->errors); - printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors); -#endif /* IDESCSI_DEBUG_LOG */ + debug_log("dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name, + rq->cmd[0], rq->errors); + debug_log("sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n", + rq->sector, rq->nr_sectors, rq->current_nr_sectors); if (blk_sense_request(rq) || blk_special_request(rq)) { return idescsi_issue_pc(drive, @@ -976,10 +975,10 @@ static int ide_scsi_probe(ide_drive_t *drive) host->max_id = 1; -#if IDESCSI_DEBUG_LOG if (drive->id->last_lun) - printk(KERN_NOTICE "%s: id->last_lun=%u\n", drive->name, drive->id->last_lun); -#endif + debug_log("%s: id->last_lun=%u\n", drive->name, + drive->id->last_lun); + if ((drive->id->last_lun & 0x7) != 7) host->max_lun = (drive->id->last_lun & 0x7) + 1; else -- cgit v0.10.2 From 87429bdc2e0701fa33a455297de01e79797b4210 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:53 +0200 Subject: ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq() Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index a562df8..58c5a5a 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -794,7 +794,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) " transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - local_irq_enable(); + local_irq_enable_in_hardirq(); #if SIMULATE_ERRORS if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) && -- cgit v0.10.2 From 1e049a8ea190b7cc22320c7797b36b2c6128c9c5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:53 +0200 Subject: ide-tape: remove superfluous error message from idetape_pc_intr() ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 58c5a5a..92fadd5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -842,7 +842,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; printk(KERN_ERR "ide-tape: The tape wants to issue more " "interrupts in DMA mode\n"); - printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n"); ide_dma_off(drive); return ide_do_reset(drive); } -- cgit v0.10.2 From 6bd3b0bfb8fccdcce3b8524d6761e0a3ab6e23f0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:53 +0200 Subject: ide-tape: remove superfluous warning message from idetape_issue_pc() ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 92fadd5..5aa7e2d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1038,8 +1038,6 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, if (pc->flags & PC_FLAG_DMA_ERROR) { pc->flags &= ~PC_FLAG_DMA_ERROR; - printk(KERN_WARNING "ide-tape: DMA disabled, " - "reverting to PIO\n"); ide_dma_off(drive); } if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) -- cgit v0.10.2 From 91395a16309596c2e78439aa5f9f6004f0365ef9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdef PC_FLAG_DMA_IN_PROGRESS flag is never set if DMA support is disabled. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 5aa7e2d..b8cc0d5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -973,11 +973,11 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) } /* Set the interrupt routine */ ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); -#ifdef CONFIG_BLK_DEV_IDEDMA + /* Begin DMA, if necessary */ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) hwif->dma_ops->dma_start(drive); -#endif + /* Send the actual packet */ hwif->output_data(drive, NULL, pc->c, 12); -- cgit v0.10.2 From 531e9e50543ebf562237b8ac64529ae09b344a43 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-tape: remove stale comments from idetape_pc_intr() Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b8cc0d5..41aa8b3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -758,27 +758,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) { - /* - * A DMA error is sometimes expected. For example, - * if the tape is crossing a filemark during a - * READ command, it will issue an irq and position - * itself before the filemark, so that only a partial - * data transfer will occur (which causes the DMA - * error). In that case, we will later ask the tape - * how much bytes of the original request were - * actually transferred (we can't receive that - * information from the DMA engine on most chipsets). - */ - - /* - * On the contrary, a DMA error is never expected; - * it usually indicates a hardware error or abort. - * If the tape crosses a filemark during a READ - * command, it will issue an irq and position itself - * after the filemark (not before). Only a partial - * data transfer will occur, but no DMA error. - * (AS, 19 Apr 2001) - */ pc->flags |= PC_FLAG_DMA_ERROR; } else { pc->xferred = pc->req_xfer; -- cgit v0.10.2 From 170ee569bbe1005baebf2e9e4c3f4622d14ec851 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-tape: remove SIMULATE_ERRORS debug code Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 41aa8b3..cc70e75 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -144,9 +144,6 @@ enum { /*************************** End of tunable parameters ***********************/ -/* Read/Write error simulation */ -#define SIMULATE_ERRORS 0 - /* tape directions */ enum { IDETAPE_DIR_NONE = (1 << 0), @@ -745,9 +742,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) xfer_func_t *xferfunc; idetape_io_buf *iobuf; unsigned int temp; -#if SIMULATE_ERRORS - static int error_sim_count; -#endif u16 bcount; u8 stat, ireason; @@ -775,14 +769,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); -#if SIMULATE_ERRORS - if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) && - (++error_sim_count % 100) == 0) { - printk(KERN_INFO "ide-tape: %s: simulating error\n", - tape->name); - stat |= ERR_STAT; - } -#endif if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) stat &= ~ERR_STAT; if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { -- cgit v0.10.2 From 0b2eea4c5594ceaf13c57eaff7ff226263f1c36f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1() * Check IDEFLOPPY_FLAG_ZIP_DRIVE flag in idefloppy_transfer_pc1() and skip idefloppy_transfer_pc2()-phase if the flag is not set. * Always use idefloppy_transfer_pc1() in idefloppy_issue_pc() and remove no longer needed idefloppy_transfer_pc(). There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 53209a4..8dbb340 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -522,40 +522,6 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) } /* - * This is the original routine that did the packet transfer. - * It fails at high speeds on the Iomega ZIP drive, so there's a slower version - * for that drive below. The algorithm is chosen based on drive type - */ -static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_startstop_t startstop; - idefloppy_floppy_t *floppy = drive->driver_data; - u8 ireason; - - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "ide-floppy: Strange, packet command " - "initiated yet DRQ isn't asserted\n"); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while " - "issuing a packet command\n"); - return ide_do_reset(drive); - } - - /* Set the interrupt routine */ - ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); - - /* Send the actual packet */ - hwif->output_data(drive, NULL, floppy->pc->c, 12); - - return ide_started; -} - - -/* * What we have here is a classic case of a top half / bottom half interrupt * service routine. In interrupt mode, the device sends an interrupt to signal * that it is ready to receive a packet. However, we need to delay about 2-3 @@ -580,6 +546,8 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; + ide_expiry_t *expiry; + unsigned int timeout; ide_startstop_t startstop; u8 ireason; @@ -602,9 +570,20 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) * 40 and 50msec work well. idefloppy_pc_intr will not be actually * used until after the packet is moved in about 50 msec. */ + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { + timeout = floppy->ticks; + expiry = &idefloppy_transfer_pc2; + } else { + timeout = IDEFLOPPY_WAIT_CMD; + expiry = NULL; + } + + ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry); + + if ((floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) == 0) + /* Send the actual packet */ + hwif->output_data(drive, NULL, floppy->pc->c, 12); - ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks, - &idefloppy_transfer_pc2); return ide_started; } @@ -629,7 +608,6 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - ide_handler_t *pkt_xfer_routine; u16 bcount; u8 dma; @@ -675,26 +653,17 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, hwif->dma_ops->dma_start(drive); } - /* Can we transfer the packet when we get the interrupt or wait? */ - if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { - /* wait */ - pkt_xfer_routine = &idefloppy_transfer_pc1; - } else { - /* immediate */ - pkt_xfer_routine = &idefloppy_transfer_pc; - } - if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ ide_execute_command(drive, WIN_PACKETCMD, - pkt_xfer_routine, + &idefloppy_transfer_pc1, IDEFLOPPY_WAIT_CMD, NULL); return ide_started; } else { /* Issue the packet command */ ide_execute_pkt_cmd(drive); - return (*pkt_xfer_routine) (drive); + return idefloppy_transfer_pc1(drive); } } -- cgit v0.10.2 From 568ca92774d2f6be4a7e2f8357559bfdc9424056 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-{floppy,tape,scsi}: log device name instead of driver name Log device name instead of driver name in *_pc_intr() and *_transfer_pc*(). While at it: * Merge two consecutive printk()-s in *_pc_intr() together. * Replace "floppy"/"tape"/"scsi" references in printk()-s by "device". Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 8dbb340..dae1c90 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -438,8 +438,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) debug_log("%s: I/O error\n", drive->name); rq->errors++; if (pc->c[0] == GPCMD_REQUEST_SENSE) { - printk(KERN_ERR "ide-floppy: I/O error in " - "request sense command\n"); + printk(KERN_ERR "%s: I/O error in request sense" + " command\n", drive->name); return ide_do_reset(drive); } /* Retry operation */ @@ -457,8 +457,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "ide-floppy: The floppy wants to issue " - "more interrupts in DMA mode\n"); + printk(KERN_ERR "%s: The device wants to issue more interrupts " + "in DMA mode\n", drive->name); ide_dma_off(drive); return ide_do_reset(drive); } @@ -470,14 +470,14 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { - printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__); + printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); return ide_do_reset(drive); } if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ - printk(KERN_ERR "ide-floppy: We wanted to %s, ", - (ireason & IO) ? "Write" : "Read"); - printk(KERN_ERR "but the floppy wants us to %s !\n", + printk(KERN_ERR "%s: We wanted to %s, but the device wants us " + "to %s!\n", drive->name, + (ireason & IO) ? "Write" : "Read", (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } @@ -486,9 +486,10 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { - printk(KERN_ERR "ide-floppy: The floppy wants " - "to send us more data than expected " - "- discarding data\n"); + printk(KERN_ERR "%s: The device wants to send " + "us more data than expected - " + "discarding data\n", + drive->name); ide_pad_transfer(drive, 0, bcount); ide_set_handler(drive, @@ -497,8 +498,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) NULL); return ide_started; } - debug_log("The floppy wants to send us more data than" - " expected - allowing transfer\n"); + debug_log("The device wants to send us more data than " + "expected - allowing transfer\n"); } } if (pc->flags & PC_FLAG_WRITING) @@ -552,14 +553,14 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) u8 ireason; if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "ide-floppy: Strange, packet command " - "initiated yet DRQ isn't asserted\n"); + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); return startstop; } ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) " - "while issuing a packet command\n"); + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); return ide_do_reset(drive); } /* diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cc70e75..8f10211 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -776,8 +776,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) debug_log(DBG_ERR, "%s: I/O error\n", tape->name); if (pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: I/O error in request" - " sense command\n"); + printk(KERN_ERR "%s: I/O error in request sense" + " command\n", drive->name); return ide_do_reset(drive); } debug_log(DBG_ERR, "[cmd %x]: check condition\n", @@ -805,8 +805,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "ide-tape: The tape wants to issue more " - "interrupts in DMA mode\n"); + printk(KERN_ERR "%s: The device wants to issue more interrupts " + "in DMA mode\n", drive->name); ide_dma_off(drive); return ide_do_reset(drive); } @@ -817,14 +817,14 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { - printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__); + printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); return ide_do_reset(drive); } if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ - printk(KERN_ERR "ide-tape: We wanted to %s, ", - (ireason & IO) ? "Write" : "Read"); - printk(KERN_ERR "ide-tape: but the tape wants us to %s !\n", + printk(KERN_ERR "%s: We wanted to %s, but the device wants us " + "to %s!\n", drive->name, + (ireason & IO) ? "Write" : "Read", (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } @@ -833,15 +833,16 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { - printk(KERN_ERR "ide-tape: The tape wants to " - "send us more data than expected " - "- discarding data\n"); + printk(KERN_ERR "%s: The device wants to send " + "us more data than expected - " + "discarding data\n", + drive->name); ide_pad_transfer(drive, 0, bcount); ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); return ide_started; } - debug_log(DBG_SENSE, "The tape wants to send us more " + debug_log(DBG_SENSE, "The device wants to send us more " "data than expected - allowing transfer\n"); } iobuf = &idetape_input_buffers; @@ -914,26 +915,27 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) u8 ireason; if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "ide-tape: Strange, packet command initiated " - "yet DRQ isn't asserted\n"); + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); return startstop; } ireason = hwif->INB(hwif->io_ports.nsect_addr); while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { - printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing " - "a packet command, retrying\n"); + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, retrying\n", drive->name); udelay(100); ireason = hwif->INB(hwif->io_ports.nsect_addr); if (retries == 0) { - printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while " - "issuing a packet command, ignoring\n"); + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, ignoring\n", + drive->name); ireason |= CD; ireason &= ~IO; } } if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing " - "a packet command\n"); + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); return ide_do_reset(drive); } /* Set the interrupt routine */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index d2dad90..5b8a193 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -391,7 +391,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { - printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); + printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); return ide_do_reset (drive); } if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { @@ -406,9 +406,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { - printk(KERN_ERR "ide-scsi: The scsi wants to " - "send us more data than expected " - "- discarding data\n"); + printk(KERN_ERR "%s: The device wants to send " + "us more data than expected - " + "discarding data\n", + drive->name); temp = pc->buf_size - pc->xferred; if (temp) { if (pc->sg) @@ -417,8 +418,9 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) else hwif->input_data(drive, NULL, pc->cur_pos, temp); - printk(KERN_ERR "ide-scsi: transferred" - " %d of %d bytes\n", + printk(KERN_ERR "%s: transferred %d of " + "%d bytes\n", + drive->name, temp, bcount); } pc->xferred += temp; @@ -427,7 +429,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); return ide_started; } - debug_log("The scsi wants to send us more data than " + debug_log("The device wants to send us more data than " "expected - allowing transfer\n"); } xferfunc = hwif->input_data; @@ -458,14 +460,14 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) u8 ireason; if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { - printk(KERN_ERR "ide-scsi: Strange, packet command " - "initiated yet DRQ isn't asserted\n"); + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); return startstop; } ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while " - "issuing a packet command\n"); + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); return ide_do_reset (drive); } -- cgit v0.10.2 From 258ec4113081c2b63117dc2df6d94c3e484e9747 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:55 +0200 Subject: ide-tape: make idetape_retry_pc() void idetape_retry_pc() always returns ide_stopped so make it void. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8f10211..48fccf1 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -696,7 +696,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, * last packet command. We queue a request sense packet command in * the head of the request list. */ -static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) +static void idetape_retry_pc(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc; @@ -708,7 +708,6 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) idetape_create_request_sense_cmd(pc); set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags); idetape_queue_pc_head(drive, pc, rq); - return ide_stopped; } /* @@ -784,7 +783,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->c[0]); /* Retry operation */ - return idetape_retry_pc(drive); + idetape_retry_pc(drive); + return ide_stopped; } pc->error = 0; if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && @@ -1078,7 +1078,8 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ - return idetape_retry_pc(drive); + idetape_retry_pc(drive); + return ide_stopped; } pc->error = 0; if (tape->failed_pc == pc) -- cgit v0.10.2 From 5985e6abbd89f969c17fd80ab864c80f089827a3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:55 +0200 Subject: ide-tape: merge callbacks The appropriate functionality of the callback is established through querying the ATAPI packet command in pc->c[0]. While at it: - add uptodate variable + leave just one idetape_end_request() call - don't use HWGROUP() macro Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 48fccf1..d387aaf 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -503,18 +503,6 @@ static struct request *idetape_next_rq_storage(ide_drive_t *drive) return (&tape->rq_stack[tape->rq_stack_index++]); } -static void idetape_init_pc(struct ide_atapi_pc *pc) -{ - memset(pc->c, 0, 12); - pc->retries = 0; - pc->flags = 0; - pc->req_xfer = 0; - pc->buf = pc->pc_buf; - pc->buf_size = IDETAPE_PC_BUFFER_SIZE; - pc->bh = NULL; - pc->b_data = NULL; -} - /* * called on each failed packet command retry to analyze the request sense. We * currently do not utilize this information. @@ -631,30 +619,85 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) return 0; } -static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive) +static ide_startstop_t ide_tape_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; + struct ide_atapi_pc *pc = tape->pc; + int uptodate = pc->error ? 0 : 1; debug_log(DBG_PROCS, "Enter %s\n", __func__); - if (!tape->pc->error) { - idetape_analyze_error(drive, tape->pc->buf); - idetape_end_request(drive, 1, 0); - } else { - printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - " - "Aborting request!\n"); - idetape_end_request(drive, 0, 0); + if (pc->c[0] == REQUEST_SENSE) { + if (uptodate) + idetape_analyze_error(drive, pc->buf); + else + printk(KERN_ERR "ide-tape: Error in REQUEST SENSE " + "itself - Aborting request!\n"); + } else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) { + struct request *rq = drive->hwif->hwgroup->rq; + int blocks = pc->xferred / tape->blk_size; + + tape->avg_size += blocks * tape->blk_size; + + if (time_after_eq(jiffies, tape->avg_time + HZ)) { + tape->avg_speed = tape->avg_size * HZ / + (jiffies - tape->avg_time) / 1024; + tape->avg_size = 0; + tape->avg_time = jiffies; + } + + tape->first_frame += blocks; + rq->current_nr_sectors -= blocks; + + if (pc->error) + uptodate = pc->error; + } else if (pc->c[0] == READ_POSITION && uptodate) { + u8 *readpos = tape->pc->buf; + + debug_log(DBG_SENSE, "BOP - %s\n", + (readpos[0] & 0x80) ? "Yes" : "No"); + debug_log(DBG_SENSE, "EOP - %s\n", + (readpos[0] & 0x40) ? "Yes" : "No"); + + if (readpos[0] & 0x4) { + printk(KERN_INFO "ide-tape: Block location is unknown" + "to the tape\n"); + clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); + uptodate = 0; + } else { + debug_log(DBG_SENSE, "Block Location - %u\n", + be32_to_cpu(*(u32 *)&readpos[4])); + + tape->partition = readpos[1]; + tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]); + set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); + } } + + idetape_end_request(drive, uptodate, 0); + return ide_stopped; } +static void idetape_init_pc(struct ide_atapi_pc *pc) +{ + memset(pc->c, 0, 12); + pc->retries = 0; + pc->flags = 0; + pc->req_xfer = 0; + pc->buf = pc->pc_buf; + pc->buf_size = IDETAPE_PC_BUFFER_SIZE; + pc->bh = NULL; + pc->b_data = NULL; + pc->idetape_callback = ide_tape_callback; +} + static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = REQUEST_SENSE; pc->c[4] = 20; pc->req_xfer = 20; - pc->idetape_callback = &idetape_request_sense_callback; } static void idetape_init_rq(struct request *rq, u8 cmd) @@ -1025,16 +1068,6 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, } } -static ide_startstop_t idetape_pc_callback(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - idetape_end_request(drive, tape->pc->error ? 0 : 1, 0); - return ide_stopped; -} - /* A mode sense command is used to "sense" tape parameters. */ static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) { @@ -1060,7 +1093,6 @@ static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) pc->req_xfer = 24; else pc->req_xfer = 50; - pc->idetape_callback = &idetape_pc_callback; } static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) @@ -1091,32 +1123,6 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) return pc->idetape_callback(drive); } -static ide_startstop_t idetape_rw_callback(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - struct request *rq = HWGROUP(drive)->rq; - int blocks = tape->pc->xferred / tape->blk_size; - - tape->avg_size += blocks * tape->blk_size; - - if (time_after_eq(jiffies, tape->avg_time + HZ)) { - tape->avg_speed = tape->avg_size * HZ / - (jiffies - tape->avg_time) / 1024; - tape->avg_size = 0; - tape->avg_time = jiffies; - } - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - tape->first_frame += blocks; - rq->current_nr_sectors -= blocks; - - if (!tape->pc->error) - idetape_end_request(drive, 1, 0); - else - idetape_end_request(drive, tape->pc->error, 0); - return ide_stopped; -} - static void idetape_create_read_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, unsigned int length, struct idetape_bh *bh) @@ -1125,7 +1131,6 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, pc->c[0] = READ_6; put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->idetape_callback = &idetape_rw_callback; pc->bh = bh; atomic_set(&bh->b_count, 0); pc->buf = NULL; @@ -1143,7 +1148,6 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, pc->c[0] = WRITE_6; put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->idetape_callback = &idetape_rw_callback; pc->flags |= PC_FLAG_WRITING; pc->bh = bh; pc->b_data = bh->b_data; @@ -1412,40 +1416,6 @@ static void idetape_init_merge_buffer(idetape_tape_t *tape) } } -static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - u8 *readpos = tape->pc->buf; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - if (!tape->pc->error) { - debug_log(DBG_SENSE, "BOP - %s\n", - (readpos[0] & 0x80) ? "Yes" : "No"); - debug_log(DBG_SENSE, "EOP - %s\n", - (readpos[0] & 0x40) ? "Yes" : "No"); - - if (readpos[0] & 0x4) { - printk(KERN_INFO "ide-tape: Block location is unknown" - "to the tape\n"); - clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); - idetape_end_request(drive, 0, 0); - } else { - debug_log(DBG_SENSE, "Block Location - %u\n", - be32_to_cpu(*(u32 *)&readpos[4])); - - tape->partition = readpos[1]; - tape->first_frame = - be32_to_cpu(*(u32 *)&readpos[4]); - set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); - idetape_end_request(drive, 1, 0); - } - } else { - idetape_end_request(drive, 0, 0); - } - return ide_stopped; -} - /* * Write a filemark if write_filemark=1. Flush the device buffers without * writing a filemark otherwise. @@ -1457,14 +1427,12 @@ static void idetape_create_write_filemark_cmd(ide_drive_t *drive, pc->c[0] = WRITE_FILEMARKS; pc->c[4] = write_filemark; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = TEST_UNIT_READY; - pc->idetape_callback = &idetape_pc_callback; } /* @@ -1502,7 +1470,6 @@ static void idetape_create_load_unload_cmd(ide_drive_t *drive, pc->c[0] = START_STOP; pc->c[4] = cmd; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) @@ -1554,7 +1521,6 @@ static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc) idetape_init_pc(pc); pc->c[0] = READ_POSITION; pc->req_xfer = 20; - pc->idetape_callback = &idetape_read_position_callback; } static int idetape_read_position(ide_drive_t *drive) @@ -1582,7 +1548,6 @@ static void idetape_create_locate_cmd(ide_drive_t *drive, put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]); pc->c[8] = partition; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static int idetape_create_prevent_cmd(ide_drive_t *drive, @@ -1597,7 +1562,6 @@ static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_init_pc(pc); pc->c[0] = ALLOW_MEDIUM_REMOVAL; pc->c[4] = prevent; - pc->idetape_callback = &idetape_pc_callback; return 1; } @@ -1704,7 +1668,6 @@ static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc) pc->c[0] = INQUIRY; pc->c[4] = 254; pc->req_xfer = 254; - pc->idetape_callback = &idetape_pc_callback; } static void idetape_create_rewind_cmd(ide_drive_t *drive, @@ -1713,7 +1676,6 @@ static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_init_pc(pc); pc->c[0] = REZERO_UNIT; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static void idetape_create_erase_cmd(struct ide_atapi_pc *pc) @@ -1722,7 +1684,6 @@ static void idetape_create_erase_cmd(struct ide_atapi_pc *pc) pc->c[0] = ERASE; pc->c[1] = 1; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) @@ -1732,7 +1693,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]); pc->c[1] = cmd; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } /* Queue up a character device originated write request. */ -- cgit v0.10.2 From 92f5daff2b8439fa4c57c57f47823ffc459c3bd9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:55 +0200 Subject: ide-tape: make pc->idetape_callback void There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d387aaf..88d26ef 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -619,7 +619,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) return 0; } -static ide_startstop_t ide_tape_callback(ide_drive_t *drive) +static void ide_tape_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc = tape->pc; @@ -675,8 +675,6 @@ static ide_startstop_t ide_tape_callback(ide_drive_t *drive) } idetape_end_request(drive, uptodate, 0); - - return ide_stopped; } static void idetape_init_pc(struct ide_atapi_pc *pc) @@ -843,7 +841,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (tape->failed_pc == pc) tape->failed_pc = NULL; /* Command finished - Call the callback function */ - return pc->idetape_callback(drive); + pc->idetape_callback(drive); + return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { @@ -1035,7 +1034,8 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, pc->error = IDETAPE_ERROR_GENERAL; } tape->failed_pc = NULL; - return pc->idetape_callback(drive); + pc->idetape_callback(drive); + return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); @@ -1120,7 +1120,8 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) pc->error = IDETAPE_ERROR_GENERAL; tape->failed_pc = NULL; } - return pc->idetape_callback(drive); + pc->idetape_callback(drive); + return ide_stopped; } static void idetape_create_read_cmd(idetape_tape_t *tape, diff --git a/include/linux/ide.h b/include/linux/ide.h index 04267dc..8936b21 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -641,7 +641,7 @@ struct ide_atapi_pc { */ u8 pc_buf[256]; void (*idefloppy_callback) (ide_drive_t *); - ide_startstop_t (*idetape_callback) (ide_drive_t *); + void (*idetape_callback) (ide_drive_t *); /* idetape only */ struct idetape_bh *bh; -- cgit v0.10.2 From 81f4938239fea86d0a7529194a37fb81041171e0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 15 Jul 2008 21:21:56 +0200 Subject: ide-floppy: merge callbacks The appropriate functionality of the callback is established through querying the ATAPI packet command in pc->c[0]. While at it, simplify if (floppy->failed_pc)-branch to be found in the original idefloppy_request_sense_callback(). Bart: - keep handling for blk_pc_request() requests unchanged + add FIXME - add uptodate variable + leave just one idefloppy_end_request() call - add newline to the debug message Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index dae1c90..2058a6f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -312,50 +312,38 @@ static struct request *idefloppy_next_rq_storage(ide_drive_t *drive) return (&floppy->rq_stack[floppy->rq_stack_index++]); } -static void idefloppy_request_sense_callback(ide_drive_t *drive) +static void ide_floppy_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - u8 *buf = floppy->pc->buf; + struct ide_atapi_pc *pc = floppy->pc; + int uptodate = pc->error ? 0 : 1; debug_log("Reached %s\n", __func__); - if (!floppy->pc->error) { - floppy->sense_key = buf[2] & 0x0F; - floppy->asc = buf[12]; - floppy->ascq = buf[13]; - floppy->progress_indication = buf[15] & 0x80 ? - (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; + if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 || + (pc->rq && blk_pc_request(pc->rq))) + uptodate = 1; /* FIXME */ + else if (pc->c[0] == GPCMD_REQUEST_SENSE) { + u8 *buf = floppy->pc->buf; - if (floppy->failed_pc) - debug_log("pc = %x, sense key = %x, asc = %x," - " ascq = %x\n", - floppy->failed_pc->c[0], - floppy->sense_key, - floppy->asc, - floppy->ascq); - else - debug_log("sense key = %x, asc = %x, ascq = %x\n", - floppy->sense_key, - floppy->asc, - floppy->ascq); + if (!pc->error) { + floppy->sense_key = buf[2] & 0x0F; + floppy->asc = buf[12]; + floppy->ascq = buf[13]; + floppy->progress_indication = buf[15] & 0x80 ? + (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; + if (floppy->failed_pc) + debug_log("pc = %x, ", floppy->failed_pc->c[0]); - idefloppy_end_request(drive, 1, 0); - } else { - printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting" - " request!\n"); - idefloppy_end_request(drive, 0, 0); + debug_log("sense key = %x, asc = %x, ascq = %x\n", + floppy->sense_key, floppy->asc, floppy->ascq); + } else + printk(KERN_ERR "Error in REQUEST SENSE itself - " + "Aborting request!\n"); } -} -/* General packet command callback function. */ -static void idefloppy_pc_callback(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - debug_log("Reached %s\n", __func__); - - idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0); + idefloppy_end_request(drive, uptodate, 0); } static void idefloppy_init_pc(struct ide_atapi_pc *pc) @@ -366,7 +354,7 @@ static void idefloppy_init_pc(struct ide_atapi_pc *pc) pc->req_xfer = 0; pc->buf = pc->pc_buf; pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; - pc->idefloppy_callback = &idefloppy_pc_callback; + pc->idefloppy_callback = &ide_floppy_callback; } static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) @@ -375,7 +363,6 @@ static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) pc->c[0] = GPCMD_REQUEST_SENSE; pc->c[4] = 255; pc->req_xfer = 18; - pc->idefloppy_callback = &idefloppy_request_sense_callback; } /* @@ -668,14 +655,6 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, } } -static void idefloppy_rw_callback(ide_drive_t *drive) -{ - debug_log("Reached %s\n", __func__); - - idefloppy_end_request(drive, 1, 0); - return; -} - static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent) { debug_log("creating prevent removal command, prevent = %d\n", prevent); @@ -770,7 +749,6 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); - pc->idefloppy_callback = &idefloppy_rw_callback; pc->rq = rq; pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; if (rq->cmd_flags & REQ_RW) @@ -784,7 +762,6 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, struct ide_atapi_pc *pc, struct request *rq) { idefloppy_init_pc(pc); - pc->idefloppy_callback = &idefloppy_rw_callback; memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; pc->b_count = rq->data_len; -- cgit v0.10.2 From 1b06e92aa03018e4b3ba281e03a7711d9b71a998 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:56 +0200 Subject: ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callback Merge pc->idefloppy_callback and pc->idetape_callback into pc->callback. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 2058a6f..a9f3127 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -354,7 +354,7 @@ static void idefloppy_init_pc(struct ide_atapi_pc *pc) pc->req_xfer = 0; pc->buf = pc->pc_buf; pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; - pc->idefloppy_callback = &ide_floppy_callback; + pc->callback = ide_floppy_callback; } static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) @@ -438,7 +438,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) if (floppy->failed_pc == pc) floppy->failed_pc = NULL; /* Command finished - Call the callback function */ - pc->idefloppy_callback(drive); + pc->callback(drive); return ide_stopped; } @@ -612,7 +612,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->error = IDEFLOPPY_ERROR_GENERAL; floppy->failed_pc = NULL; - pc->idefloppy_callback(drive); + pc->callback(drive); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 88d26ef..ce9b6d3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -687,7 +687,7 @@ static void idetape_init_pc(struct ide_atapi_pc *pc) pc->buf_size = IDETAPE_PC_BUFFER_SIZE; pc->bh = NULL; pc->b_data = NULL; - pc->idetape_callback = ide_tape_callback; + pc->callback = ide_tape_callback; } static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc) @@ -841,7 +841,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (tape->failed_pc == pc) tape->failed_pc = NULL; /* Command finished - Call the callback function */ - pc->idetape_callback(drive); + pc->callback(drive); return ide_stopped; } @@ -1034,7 +1034,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, pc->error = IDETAPE_ERROR_GENERAL; } tape->failed_pc = NULL; - pc->idetape_callback(drive); + pc->callback(drive); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); @@ -1120,7 +1120,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) pc->error = IDETAPE_ERROR_GENERAL; tape->failed_pc = NULL; } - pc->idetape_callback(drive); + pc->callback(drive); return ide_stopped; } diff --git a/include/linux/ide.h b/include/linux/ide.h index 8936b21..f079456 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -640,8 +640,8 @@ struct ide_atapi_pc { * to change/removal later. */ u8 pc_buf[256]; - void (*idefloppy_callback) (ide_drive_t *); - void (*idetape_callback) (ide_drive_t *); + + void (*callback)(ide_drive_t *); /* idetape only */ struct idetape_bh *bh; -- cgit v0.10.2 From 5e3310958204912f3f00be2592c945fbc37db6ae Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:56 +0200 Subject: ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OK * Use PC_FLAG_DMA_OK flag instead of PC_FLAG_DMA_RECOMMENDED one. * Remove no longer used PC_FLAG_DMA_RECOMMENDED flag. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index a9f3127..dbefe35 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -630,7 +630,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, } dma = 0; - if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) + if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) dma = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); @@ -755,7 +755,7 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, pc->flags |= PC_FLAG_WRITING; pc->buf = NULL; pc->req_xfer = pc->buf_size = blocks * floppy->block_size; - pc->flags |= PC_FLAG_DMA_RECOMMENDED; + pc->flags |= PC_FLAG_DMA_OK; } static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, @@ -769,7 +769,7 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, pc->flags |= PC_FLAG_WRITING; pc->buf = rq->data; if (rq->bio) - pc->flags |= PC_FLAG_DMA_RECOMMENDED; + pc->flags |= PC_FLAG_DMA_OK; /* * possibly problematic, doesn't look like ide-floppy correctly * handled scattered requests if dma fails... diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index ce9b6d3..e8a5852 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1050,7 +1050,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, pc->flags &= ~PC_FLAG_DMA_ERROR; ide_dma_off(drive); } - if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) + if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) dma_ok = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); @@ -1138,7 +1138,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; if (pc->req_xfer == tape->buffer_size) - pc->flags |= PC_FLAG_DMA_RECOMMENDED; + pc->flags |= PC_FLAG_DMA_OK; } static void idetape_create_write_cmd(idetape_tape_t *tape, @@ -1157,7 +1157,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; if (pc->req_xfer == tape->buffer_size) - pc->flags |= PC_FLAG_DMA_RECOMMENDED; + pc->flags |= PC_FLAG_DMA_OK; } static ide_startstop_t idetape_do_request(ide_drive_t *drive, diff --git a/include/linux/ide.h b/include/linux/ide.h index f079456..63cee29 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -602,12 +602,11 @@ enum { PC_FLAG_SUPPRESS_ERROR = (1 << 1), PC_FLAG_WAIT_FOR_DSC = (1 << 2), PC_FLAG_DMA_OK = (1 << 3), - PC_FLAG_DMA_RECOMMENDED = (1 << 4), - PC_FLAG_DMA_IN_PROGRESS = (1 << 5), - PC_FLAG_DMA_ERROR = (1 << 6), - PC_FLAG_WRITING = (1 << 7), + PC_FLAG_DMA_IN_PROGRESS = (1 << 4), + PC_FLAG_DMA_ERROR = (1 << 5), + PC_FLAG_WRITING = (1 << 6), /* command timed out */ - PC_FLAG_TIMEDOUT = (1 << 8), + PC_FLAG_TIMEDOUT = (1 << 7), }; struct ide_atapi_pc { -- cgit v0.10.2 From 6ffb66410dd9f5f383d9265d51ab667333a8296c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:56 +0200 Subject: ide-floppy: start DMA engine in idefloppy_transfer_pc1() Start DMA engine and set PC_FLAG_DMA_IN_PROGRESS flag in idefloppy_transfer_pc1() instead of idefloppy_issue_pc() so the Status Register and the Interrupt Reason Register are checked first. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index dbefe35..1df6a31 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -534,6 +534,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_atapi_pc *pc = floppy->pc; ide_expiry_t *expiry; unsigned int timeout; ide_startstop_t startstop; @@ -568,6 +569,12 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry); + /* Begin DMA, if necessary */ + if (pc->flags & PC_FLAG_DMA_OK) { + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; + hwif->dma_ops->dma_start(drive); + } + if ((floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) == 0) /* Send the actual packet */ hwif->output_data(drive, NULL, floppy->pc->c, 12); @@ -633,13 +640,10 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) dma = !hwif->dma_ops->dma_setup(drive); - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); + if (!dma) + pc->flags &= ~PC_FLAG_DMA_OK; - if (dma) { - /* Begin DMA, if necessary */ - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ -- cgit v0.10.2 From 9fd13a27c8a35ff1986793cb96aaedb5e75b5368 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:57 +0200 Subject: ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() Set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() instead of idetape_issue_pc() to match the other ATAPI device drivers. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index e8a5852..1ce8b31 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -984,8 +984,10 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); /* Begin DMA, if necessary */ - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) + if (pc->flags & PC_FLAG_DMA_OK) { + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; hwif->dma_ops->dma_start(drive); + } /* Send the actual packet */ hwif->output_data(drive, NULL, pc->c, 12); @@ -1053,11 +1055,11 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) dma_ok = !hwif->dma_ops->dma_setup(drive); + if (!dma_ok) + pc->flags &= ~PC_FLAG_DMA_OK; + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); - if (dma_ok) - /* Will begin DMA later */ - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) { ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL); -- cgit v0.10.2 From 5a7b75ab429e9ed568be50cfbf7091f097457cb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:57 +0200 Subject: ide-tape: factor out waiting for good ireason from idetape_transfer_pc() Factor out waiting for good ireason from idetape_transfer_pc() to ide_tape_wait_ireason() as a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1ce8b31..63b837e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -947,21 +947,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * again, the callback function will be called and then we will handle the next * request. */ -static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) + +static u8 ide_tape_wait_ireason(ide_drive_t *drive, u8 ireason) { ide_hwif_t *hwif = drive->hwif; - idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; int retries = 100; - ide_startstop_t startstop; - u8 ireason; - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " "a packet command, retrying\n", drive->name); @@ -975,6 +966,27 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) ireason &= ~IO; } } + + return ireason; +} + +static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + idetape_tape_t *tape = drive->driver_data; + struct ide_atapi_pc *pc = tape->pc; + ide_startstop_t startstop; + u8 ireason; + + if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); + return startstop; + } + + ireason = hwif->INB(hwif->io_ports.nsect_addr); + ireason = ide_tape_wait_ireason(drive, ireason); + if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " "a packet command\n", drive->name); -- cgit v0.10.2 From 5d41893c0f9caf94b449eada0279a08c86f0212e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:57 +0200 Subject: ide: add PC_FLAG_ZIP_DRIVE pc flag Add PC_FLAG_ZIP_DRIVE pc flag, set it in idefloppy_do_request() and check for it (instead of checking for IDEFLOPPY_FLAG_ZIP_DRIVE) in idefloppy_transfer_pc(). This is a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 1df6a31..cff90c4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -559,7 +559,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) * 40 and 50msec work well. idefloppy_pc_intr will not be actually * used until after the packet is moved in about 50 msec. */ - if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { + if (pc->flags & PC_FLAG_ZIP_DRIVE) { timeout = floppy->ticks; expiry = &idefloppy_transfer_pc2; } else { @@ -575,7 +575,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) hwif->dma_ops->dma_start(drive); } - if ((floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) == 0) + if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) /* Send the actual packet */ hwif->output_data(drive, NULL, floppy->pc->c, 12); @@ -826,7 +826,11 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, return ide_stopped; } + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) + pc->flags |= PC_FLAG_ZIP_DRIVE; + pc->rq = rq; + return idefloppy_issue_pc(drive, pc); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 63cee29..89feaea 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -607,6 +607,7 @@ enum { PC_FLAG_WRITING = (1 << 6), /* command timed out */ PC_FLAG_TIMEDOUT = (1 << 7), + PC_FLAG_ZIP_DRIVE = (1 << 8), }; struct ide_atapi_pc { -- cgit v0.10.2 From 794cc6804bb946826b7427d205ac391a5370d361 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:57 +0200 Subject: ide-{cd,floppy,tape}: remove checking for drive->scsi Remove checking for drive->scsi which is no longer set by IDE core code (leave the flag since it will be re-used for generic ATAPI support). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 043129c..d998471 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -2106,11 +2106,6 @@ static int ide_cd_probe(ide_drive_t *drive) goto failed; } } - if (drive->scsi) { - printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi " - "emulation.\n", drive->name); - goto failed; - } info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL); if (info == NULL) { printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index cff90c4..a7c138d 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1579,11 +1579,6 @@ static int ide_floppy_probe(ide_drive_t *drive) " of ide-floppy\n", drive->name); goto failed; } - if (drive->scsi) { - printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi" - " emulation.\n", drive->name); - goto failed; - } floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL); if (!floppy) { printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy" diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 63b837e..2a36213 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2850,11 +2850,6 @@ static int ide_tape_probe(ide_drive_t *drive) " the driver\n", drive->name); goto failed; } - if (drive->scsi) { - printk(KERN_INFO "ide-tape: passing drive %s to ide-scsi" - " emulation.\n", drive->name); - goto failed; - } tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL); if (tape == NULL) { printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n", -- cgit v0.10.2 From f83cbc77b0d5521b4f0f591ede4870316944481a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:58 +0200 Subject: ide-scsi: set drive->scsi flag for devices handled by the driver This is a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 5b8a193..c9fdf60 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -629,6 +629,8 @@ static void ide_scsi_remove(ide_drive_t *drive) put_disk(g); ide_scsi_put(scsi); + + drive->scsi = 0; } static int ide_scsi_probe(ide_drive_t *); @@ -969,6 +971,8 @@ static int ide_scsi_probe(ide_drive_t *drive) !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) return -ENODEV; + drive->scsi = 1; + g = alloc_disk(1 << PARTN_BITS); if (!g) goto out_host_put; @@ -1009,6 +1013,7 @@ static int ide_scsi_probe(ide_drive_t *drive) put_disk(g); out_host_put: + drive->scsi = 0; scsi_host_put(host); return err; } -- cgit v0.10.2 From 594c16d8dd54cd7b1c5ef1ec3ac0f6bf34301dad Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:58 +0200 Subject: ide: add ide_transfer_pc() helper * Add ide-atapi.c file for generic ATAPI support together with CONFIG_IDE_ATAPI config option. * Add generic ide_transfer_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1607536..cf707c8 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -98,6 +98,9 @@ if BLK_DEV_IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_ATAPI + bool + config BLK_DEV_IDE_SATA bool "Support for SATA (deprecated; conflicts with libata SATA driver)" default n @@ -201,6 +204,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS config BLK_DEV_IDETAPE tristate "Include IDE/ATAPI TAPE support" + select IDE_ATAPI help If you have an IDE tape drive using the ATAPI protocol, say Y. ATAPI is a newer protocol used by IDE tape and CD-ROM drives, @@ -223,6 +227,7 @@ config BLK_DEV_IDETAPE config BLK_DEV_IDEFLOPPY tristate "Include IDE/ATAPI FLOPPY support" + select IDE_ATAPI ---help--- If you have an IDE floppy drive which uses the ATAPI protocol, answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy @@ -246,6 +251,7 @@ config BLK_DEV_IDEFLOPPY config BLK_DEV_IDESCSI tristate "SCSI emulation support" depends on SCSI + select IDE_ATAPI ---help--- WARNING: ide-scsi is no longer needed for cd writing applications! The 2.6 kernel supports direct writing to ide-cd, which eliminates diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index f94b679..a2b3f84 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -14,6 +14,7 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o # core IDE code +ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c new file mode 100644 index 0000000..25939bc --- /dev/null +++ b/drivers/ide/ide-atapi.c @@ -0,0 +1,70 @@ +/* + * ATAPI support. + */ + +#include +#include +#include + +static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) +{ + ide_hwif_t *hwif = drive->hwif; + int retries = 100; + + while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, retrying\n", drive->name); + udelay(100); + ireason = hwif->INB(hwif->io_ports.nsect_addr); + if (retries == 0) { + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, ignoring\n", + drive->name); + ireason |= CD; + ireason &= ~IO; + } + } + + return ireason; +} + +ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, + ide_expiry_t *expiry) +{ + ide_hwif_t *hwif = drive->hwif; + ide_startstop_t startstop; + u8 ireason; + + if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); + return startstop; + } + + ireason = hwif->INB(hwif->io_ports.nsect_addr); + if (drive->media == ide_tape && !drive->scsi) + ireason = ide_wait_ireason(drive, ireason); + + if ((ireason & CD) == 0 || (ireason & IO)) { + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); + return ide_do_reset(drive); + } + + /* Set the interrupt routine */ + ide_set_handler(drive, handler, timeout, expiry); + + /* Begin DMA, if necessary */ + if (pc->flags & PC_FLAG_DMA_OK) { + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; + hwif->dma_ops->dma_start(drive); + } + + /* Send the actual packet */ + if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) + hwif->output_data(drive, NULL, pc->c, 12); + + return ide_started; +} +EXPORT_SYMBOL_GPL(ide_transfer_pc); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index a7c138d..e7a1025 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -532,25 +532,11 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive) static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; struct ide_atapi_pc *pc = floppy->pc; ide_expiry_t *expiry; unsigned int timeout; - ide_startstop_t startstop; - u8 ireason; - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset(drive); - } /* * The following delay solves a problem with ATAPI Zip 100 drives * where the Busy flag was apparently being deasserted before the @@ -567,19 +553,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) expiry = NULL; } - ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry); - - /* Begin DMA, if necessary */ - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) - /* Send the actual packet */ - hwif->output_data(drive, NULL, floppy->pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry); } static void ide_floppy_report_error(idefloppy_floppy_t *floppy, diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2a36213..5adc2c9 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -947,64 +947,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * again, the callback function will be called and then we will handle the next * request. */ - -static u8 ide_tape_wait_ireason(ide_drive_t *drive, u8 ireason) -{ - ide_hwif_t *hwif = drive->hwif; - int retries = 100; - - while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { - printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " - "a packet command, retrying\n", drive->name); - udelay(100); - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if (retries == 0) { - printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " - "a packet command, ignoring\n", - drive->name); - ireason |= CD; - ireason &= ~IO; - } - } - - return ireason; -} - static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; - ide_startstop_t startstop; - u8 ireason; - - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - - ireason = hwif->INB(hwif->io_ports.nsect_addr); - ireason = ide_tape_wait_ireason(drive, ireason); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset(drive); - } - /* Set the interrupt routine */ - ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); - - /* Begin DMA, if necessary */ - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - /* Send the actual packet */ - hwif->output_data(drive, NULL, pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, tape->pc, idetape_pc_intr, + IDETAPE_WAIT_CMD, NULL); } static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index c9fdf60..d41348f 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -453,36 +453,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; - ide_startstop_t startstop; - u8 ireason; - - if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset (drive); - } - /* Set the interrupt routine */ - ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - /* Send the actual packet */ - hwif->output_data(drive, NULL, scsi->pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr, + get_timeout(scsi->pc), idescsi_expiry); } static inline int idescsi_set_direction(struct ide_atapi_pc *pc) diff --git a/include/linux/ide.h b/include/linux/ide.h index 89feaea..bed3c58 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -967,6 +967,9 @@ extern int drive_is_ready(ide_drive_t *); void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); +ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, + ide_handler_t *, unsigned int, ide_expiry_t *); + ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); void task_end_request(ide_drive_t *, struct request *, u8); -- cgit v0.10.2 From 4cc196897de9e6c02cf86debc5b9f7cf1b69a214 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:58 +0200 Subject: ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc() Move idescsi_map_sg() call out from idescsi_issue_pc() to idescsi_do_request() as a preparation to adding generic ide_issue_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index d41348f..1d26129 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -514,16 +514,16 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, /* Request to transfer the entire buffer at once */ bcount = min(pc->req_xfer, 63 * 1024); - if (drive->using_dma && !idescsi_map_sg(drive, pc)) { + if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { hwif->sg_mapped = 1; dma = !hwif->dma_ops->dma_setup(drive); hwif->sg_mapped = 0; } - ide_pktcmd_tf_load(drive, 0, bcount, dma); + if (!dma) + pc->flags &= ~PC_FLAG_DMA_OK; - if (dma) - pc->flags |= PC_FLAG_DMA_OK; + ide_pktcmd_tf_load(drive, 0, bcount, dma); if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, @@ -547,8 +547,12 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r rq->sector, rq->nr_sectors, rq->current_nr_sectors); if (blk_sense_request(rq) || blk_special_request(rq)) { - return idescsi_issue_pc(drive, - (struct ide_atapi_pc *) rq->special); + struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special; + + if (drive->using_dma && !idescsi_map_sg(drive, pc)) + pc->flags |= PC_FLAG_DMA_OK; + + return idescsi_issue_pc(drive, pc); } blk_dump_rq_flags(rq, "ide-scsi: unsup command"); idescsi_end_request (drive, 0, 0); -- cgit v0.10.2 From 28c7214bd8c2bbd4873b8f1e7f58d86d3731124f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:59 +0200 Subject: ide: add PC_FLAG_DRQ_INTERRUPT pc flag Add PC_FLAG_DRQ_INTERRUPT pc flag, set it in ide*_do_request() and check for it (instead of checking for IDE*_FLAG_DRQ_INTERRUPT) in ide*_issue_pc(). This is a preparation for adding generic ide_issue_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e7a1025..13f650f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -619,7 +619,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); - if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { + if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ ide_execute_command(drive, WIN_PACKETCMD, &idefloppy_transfer_pc1, @@ -800,6 +800,9 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, return ide_stopped; } + if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) + pc->flags |= PC_FLAG_DRQ_INTERRUPT; + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) pc->flags |= PC_FLAG_ZIP_DRIVE; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 5adc2c9..cba18a6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1020,7 +1020,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); - if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) { + if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL); return ide_started; @@ -1143,8 +1143,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } /* Retry a failed packet command */ - if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) - return idetape_issue_pc(drive, tape->failed_pc); + if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) { + pc = tape->failed_pc; + goto out; + } if (postponed_rq != NULL) if (rq != postponed_rq) { @@ -1216,6 +1218,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } BUG(); out: + if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) + pc->flags |= PC_FLAG_DRQ_INTERRUPT; + return idetape_issue_pc(drive, pc); } diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 1d26129..b7c5e83 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -525,7 +525,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, ide_pktcmd_tf_load(drive, 0, bcount, dma); - if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { + if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, get_timeout(pc), idescsi_expiry); return ide_started; @@ -548,6 +548,10 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r if (blk_sense_request(rq) || blk_special_request(rq)) { struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special; + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + + if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) + pc->flags |= PC_FLAG_DRQ_INTERRUPT; if (drive->using_dma && !idescsi_map_sg(drive, pc)) pc->flags |= PC_FLAG_DMA_OK; diff --git a/include/linux/ide.h b/include/linux/ide.h index bed3c58..c2274ad 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -608,6 +608,7 @@ enum { /* command timed out */ PC_FLAG_TIMEDOUT = (1 << 7), PC_FLAG_ZIP_DRIVE = (1 << 8), + PC_FLAG_DRQ_INTERRUPT = (1 << 9), }; struct ide_atapi_pc { -- cgit v0.10.2 From 6bf1641ca1c7554f0da54aaf89788731b541bacc Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:00 +0200 Subject: ide: add ide_issue_pc() helper Add generic ide_issue_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 25939bc..932a83a 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -68,3 +68,52 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, return ide_started; } EXPORT_SYMBOL_GPL(ide_transfer_pc); + +ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, + ide_expiry_t *expiry) +{ + ide_hwif_t *hwif = drive->hwif; + u16 bcount; + u8 dma = 0; + + /* We haven't transferred any data yet */ + pc->xferred = 0; + pc->cur_pos = pc->buf; + + /* Request to transfer the entire buffer at once */ + if (drive->media == ide_tape && !drive->scsi) + bcount = pc->req_xfer; + else + bcount = min(pc->req_xfer, 63 * 1024); + + if (pc->flags & PC_FLAG_DMA_ERROR) { + pc->flags &= ~PC_FLAG_DMA_ERROR; + ide_dma_off(drive); + } + + if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { + if (drive->scsi) + hwif->sg_mapped = 1; + dma = !hwif->dma_ops->dma_setup(drive); + if (drive->scsi) + hwif->sg_mapped = 0; + } + + if (!dma) + pc->flags &= ~PC_FLAG_DMA_OK; + + ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE, + bcount, dma); + + /* Issue the packet command */ + if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { + ide_execute_command(drive, WIN_PACKETCMD, handler, + timeout, NULL); + return ide_started; + } else { + ide_execute_pkt_cmd(drive); + return (*handler)(drive); + } +} +EXPORT_SYMBOL_GPL(ide_issue_pc); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 13f650f..e658aaf 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -576,9 +576,6 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { idefloppy_floppy_t *floppy = drive->driver_data; - ide_hwif_t *hwif = drive->hwif; - u16 bcount; - u8 dma; if (floppy->failed_pc == NULL && pc->c[0] != GPCMD_REQUEST_SENSE) @@ -600,37 +597,9 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, debug_log("Retry number - %d\n", pc->retries); pc->retries++; - /* We haven't transferred any data yet */ - pc->xferred = 0; - pc->cur_pos = pc->buf; - bcount = min(pc->req_xfer, 63 * 1024); - - if (pc->flags & PC_FLAG_DMA_ERROR) { - pc->flags &= ~PC_FLAG_DMA_ERROR; - ide_dma_off(drive); - } - dma = 0; - if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) - dma = !hwif->dma_ops->dma_setup(drive); - - if (!dma) - pc->flags &= ~PC_FLAG_DMA_OK; - - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); - - if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { - /* Issue the packet command */ - ide_execute_command(drive, WIN_PACKETCMD, - &idefloppy_transfer_pc1, - IDEFLOPPY_WAIT_CMD, - NULL); - return ide_started; - } else { - /* Issue the packet command */ - ide_execute_pkt_cmd(drive); - return idefloppy_transfer_pc1(drive); - } + return ide_issue_pc(drive, pc, idefloppy_transfer_pc1, + IDEFLOPPY_WAIT_CMD, NULL); } static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cba18a6..7907a1e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -958,10 +958,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { - ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - int dma_ok = 0; - u16 bcount; if (tape->pc->c[0] == REQUEST_SENSE && pc->c[0] == REQUEST_SENSE) { @@ -1002,32 +999,9 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); pc->retries++; - /* We haven't transferred any data yet */ - pc->xferred = 0; - pc->cur_pos = pc->buf; - /* Request to transfer the entire buffer at once */ - bcount = pc->req_xfer; - - if (pc->flags & PC_FLAG_DMA_ERROR) { - pc->flags &= ~PC_FLAG_DMA_ERROR; - ide_dma_off(drive); - } - if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) - dma_ok = !hwif->dma_ops->dma_setup(drive); - - if (!dma_ok) - pc->flags &= ~PC_FLAG_DMA_OK; - - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); - if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { - ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, - IDETAPE_WAIT_CMD, NULL); - return ide_started; - } else { - ide_execute_pkt_cmd(drive); - return idetape_transfer_pc(drive); - } + return ide_issue_pc(drive, pc, idetape_transfer_pc, + IDETAPE_WAIT_CMD, NULL); } /* A mode sense command is used to "sense" tape parameters. */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index b7c5e83..3241546 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -502,38 +502,12 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - ide_hwif_t *hwif = drive->hwif; - u16 bcount; - u8 dma = 0; /* Set the current packet command */ scsi->pc = pc; - /* We haven't transferred any data yet */ - pc->xferred = 0; - pc->cur_pos = pc->buf; - /* Request to transfer the entire buffer at once */ - bcount = min(pc->req_xfer, 63 * 1024); - - if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { - hwif->sg_mapped = 1; - dma = !hwif->dma_ops->dma_setup(drive); - hwif->sg_mapped = 0; - } - - if (!dma) - pc->flags &= ~PC_FLAG_DMA_OK; - ide_pktcmd_tf_load(drive, 0, bcount, dma); - - if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { - ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, - get_timeout(pc), idescsi_expiry); - return ide_started; - } else { - /* Issue the packet command */ - ide_execute_pkt_cmd(drive); - return idescsi_transfer_pc(drive); - } + return ide_issue_pc(drive, pc, idescsi_transfer_pc, + get_timeout(pc), idescsi_expiry); } /* diff --git a/include/linux/ide.h b/include/linux/ide.h index c2274ad..fee07a7 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -970,6 +970,8 @@ void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, ide_handler_t *, unsigned int, ide_expiry_t *); +ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *, + ide_handler_t *, unsigned int, ide_expiry_t *); ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); -- cgit v0.10.2 From dd2e9a032bc552f6e2ae852e81cde602c09d7d3e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:01 +0200 Subject: ide-{floppy,tape}: move checking of ->failed_pc to ->callback Move checking/resetting of ->failed_pc from ide*_pc_intr() to ->callback as a preparation for adding generic ide_pc_intr() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e658aaf..b1d6905 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -320,6 +320,9 @@ static void ide_floppy_callback(ide_drive_t *drive) debug_log("Reached %s\n", __func__); + if (floppy->failed_pc == pc) + floppy->failed_pc = NULL; + if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 || (pc->rq && blk_pc_request(pc->rq))) uptodate = 1; /* FIXME */ @@ -435,8 +438,6 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) return ide_stopped; } pc->error = 0; - if (floppy->failed_pc == pc) - floppy->failed_pc = NULL; /* Command finished - Call the callback function */ pc->callback(drive); return ide_stopped; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7907a1e..0fec58e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -627,6 +627,9 @@ static void ide_tape_callback(ide_drive_t *drive) debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (tape->failed_pc == pc) + tape->failed_pc = NULL; + if (pc->c[0] == REQUEST_SENSE) { if (uptodate) idetape_analyze_error(drive, pc->buf); @@ -838,8 +841,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) idetape_postpone_request(drive); return ide_stopped; } - if (tape->failed_pc == pc) - tape->failed_pc = NULL; /* Command finished - Call the callback function */ pc->callback(drive); return ide_stopped; @@ -1050,8 +1051,6 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) return ide_stopped; } pc->error = 0; - if (tape->failed_pc == pc) - tape->failed_pc = NULL; } else { pc->error = IDETAPE_ERROR_GENERAL; tape->failed_pc = NULL; -- cgit v0.10.2 From 74e63e74ea57e06839aa5fcf016eace35da26050 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:01 +0200 Subject: ide-tape: factor out DSC handling from idetape_pc_intr() Factor out DSC handling from idetape_pc_intr() to ide_tape_handle_dsc() helper as a preparation for adding generic ide_pc_intr() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0fec58e..b224823 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -768,6 +768,18 @@ static void idetape_postpone_request(ide_drive_t *drive) ide_stall_queue(drive, tape->dsc_poll_freq); } +static void ide_tape_handle_dsc(ide_drive_t *drive) +{ + idetape_tape_t *tape = drive->driver_data; + + /* Media access command */ + tape->dsc_polling_start = jiffies; + tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST; + tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT; + /* Allow ide.c to handle other requests */ + idetape_postpone_request(drive); +} + typedef void idetape_io_buf(ide_drive_t *, struct ide_atapi_pc *, unsigned int); /* @@ -833,12 +845,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->error = 0; if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & SEEK_STAT) == 0) { - /* Media access command */ - tape->dsc_polling_start = jiffies; - tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST; - tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT; - /* Allow ide.c to handle other requests */ - idetape_postpone_request(drive); + ide_tape_handle_dsc(drive); return ide_stopped; } /* Command finished - Call the callback function */ -- cgit v0.10.2 From 08424ac24a35b505463919a897b097f27e4dca96 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:01 +0200 Subject: ide-tape: add ide_tape_io_buffers() helper * Add ide_tape_io_buffers() helper which is a wrapper for idetape_{in,out}put_buffers() and convert idetape_pc_intr() to use it. * Remove no longer used idetape_io_buf typedef. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b224823..6801c68 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -780,7 +780,14 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) idetape_postpone_request(drive); } -typedef void idetape_io_buf(ide_drive_t *, struct ide_atapi_pc *, unsigned int); +static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned int bcount, int write) +{ + if (write) + idetape_output_buffers(drive, pc, bcount); + else + idetape_input_buffers(drive, pc, bcount); +} /* * This is the usual interrupt handler which will be called during a packet @@ -795,7 +802,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc = tape->pc; xfer_func_t *xferfunc; - idetape_io_buf *iobuf; unsigned int temp; u16 bcount; u8 stat, ireason; @@ -895,15 +901,14 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) debug_log(DBG_SENSE, "The device wants to send us more " "data than expected - allowing transfer\n"); } - iobuf = &idetape_input_buffers; xferfunc = hwif->input_data; } else { - iobuf = &idetape_output_buffers; xferfunc = hwif->output_data; } if (pc->bh) - iobuf(drive, pc, bcount); + ide_tape_io_buffers(drive, pc, bcount, + !!(pc->flags & PC_FLAG_WRITING)); else xferfunc(drive, NULL, pc->cur_pos, bcount); -- cgit v0.10.2 From 3e421d324c003f8f002f402141b15d758adbfaef Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:01 +0200 Subject: ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled Add DBG_PC_INTR debug level and use it to always log debug info in idetape_pc_intr() if debugging is enabled. While at it: * Use drive->name instead of tape->name. * Log device name with "DMA finished" message. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 6801c68..10f2d33 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -56,6 +56,8 @@ enum { DBG_PROCS = (1 << 3), /* buffer alloc info (pc_stack & rq_stack) */ DBG_PCRQ_STACK = (1 << 4), + /* IRQ handler (always log debug info if debugging is on) */ + DBG_PC_INTR = (1 << 5), }; /* define to see debug info */ @@ -64,7 +66,7 @@ enum { #if IDETAPE_DEBUG_LOG #define debug_log(lvl, fmt, args...) \ { \ - if (tape->debug_mask & lvl) \ + if ((lvl & DBG_PC_INTR) || (tape->debug_mask & lvl)) \ printk(KERN_INFO "ide-tape: " fmt, ## args); \ } #else @@ -806,7 +808,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) u16 bcount; u8 stat, ireason; - debug_log(DBG_PROCS, "Enter %s - interrupt handler\n", __func__); + debug_log(DBG_PC_INTR, "Enter %s - interrupt handler\n", __func__); /* Clear the interrupt */ stat = ide_read_status(drive); @@ -818,13 +820,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->xferred = pc->req_xfer; idetape_update_buffers(pc); } - debug_log(DBG_PROCS, "DMA finished\n"); - + debug_log(DBG_PC_INTR, "%s: DMA finished\n", drive->name); } /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { - debug_log(DBG_SENSE, "Packet command completed, %d bytes" + debug_log(DBG_PC_INTR, "Packet command completed, %d bytes" " transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; @@ -834,14 +835,14 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) stat &= ~ERR_STAT; if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { /* Error detected */ - debug_log(DBG_ERR, "%s: I/O error\n", tape->name); + debug_log(DBG_PC_INTR, "%s: I/O error\n", drive->name); if (pc->c[0] == REQUEST_SENSE) { printk(KERN_ERR "%s: I/O error in request sense" " command\n", drive->name); return ide_do_reset(drive); } - debug_log(DBG_ERR, "[cmd %x]: check condition\n", + debug_log(DBG_PC_INTR, "[cmd %x]: check condition\n", pc->c[0]); /* Retry operation */ @@ -898,7 +899,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) IDETAPE_WAIT_CMD, NULL); return ide_started; } - debug_log(DBG_SENSE, "The device wants to send us more " + debug_log(DBG_PC_INTR, "The device wants to send us more " "data than expected - allowing transfer\n"); } xferfunc = hwif->input_data; @@ -916,7 +917,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->xferred += bcount; pc->cur_pos += bcount; - debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n", + debug_log(DBG_PC_INTR, "[cmd %x] transferred %d bytes on that intr.\n", pc->c[0], bcount); /* And set the interrupt handler again */ -- cgit v0.10.2 From 4c93067ea9e5eca9d975bec74dae641228ac1bbe Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:02 +0200 Subject: ide-floppy: add more debugging to idefloppy_pc_intr() Add more debugging to idefloppy_pc_intr() to match ide-tape's idetape_pc_intr(). While at it: * Correct the first debug message. * Log device name with "DMA finished" message. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index b1d6905..502ef9d 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -397,7 +397,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) u16 bcount; u8 stat, ireason; - debug_log("Reached %s interrupt handler\n", __func__); + debug_log("Enter %s - interrupt handler\n", __func__); if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { dma_error = hwif->dma_ops->dma_end(drive); @@ -409,7 +409,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) pc->xferred = pc->req_xfer; idefloppy_update_buffers(drive, pc); } - debug_log("DMA finished\n"); + debug_log("%s: DMA finished\n", drive->name); } /* Clear the interrupt */ @@ -432,6 +432,9 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) " command\n", drive->name); return ide_do_reset(drive); } + + debug_log("[cmd %x]: check condition\n", pc->c[0]); + /* Retry operation */ idefloppy_retry_pc(drive); /* queued, but not started */ @@ -505,6 +508,9 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) pc->xferred += bcount; pc->cur_pos += bcount; + debug_log("[cmd %x] transferred %d bytes on that intr.\n", + pc->c[0], bcount); + /* And set the interrupt handler again */ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); return ide_started; -- cgit v0.10.2 From c6b2d260b5a7a5ed32aa2ce370d81183fc37eeb1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:02 +0200 Subject: ide-scsi: use pc->callback * Add ide_scsi_callback() pc->callback implementation, then update idescsi_check_condition() and idescsi_queue() to setup ->callback. * Convert idescsi_pc_intr() to use pc->callback. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 3241546..c0b39b9 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -183,6 +183,24 @@ static void ide_scsi_hex_dump(u8 *data, int len) print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0); } +static int idescsi_end_request(ide_drive_t *, int, int); + +static void ide_scsi_callback(ide_drive_t *drive) +{ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + struct ide_atapi_pc *pc = scsi->pc; + + if (pc->flags & PC_FLAG_TIMEDOUT) + debug_log("%s: got timed out packet %lu at %lu\n", __func__, + pc->scsi_cmd->serial_number, jiffies); + /* end this request now - scsi should retry it*/ + else if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) + printk(KERN_INFO "Packet command completed, %d bytes" + " transferred\n", pc->xferred); + + idescsi_end_request(drive, 1, 0); +} + static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_cmd) { @@ -210,6 +228,7 @@ static int idescsi_check_condition(ide_drive_t *drive, rq->cmd_type = REQ_TYPE_SENSE; rq->cmd_flags |= REQ_PREEMPT; pc->timeout = jiffies + WAIT_READY; + pc->callback = ide_scsi_callback; /* NOTE! Save the failed packet command in "rq->buffer" */ rq->buffer = (void *) failed_cmd->special; pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd; @@ -222,8 +241,6 @@ static int idescsi_check_condition(ide_drive_t *drive, return 0; } -static int idescsi_end_request(ide_drive_t *, int, int); - static ide_startstop_t idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) { @@ -350,10 +367,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) debug_log("Reached %s interrupt handler\n", __func__); if (pc->flags & PC_FLAG_TIMEDOUT) { - debug_log("%s: got timed out packet %lu at %lu\n", __func__, - pc->scsi_cmd->serial_number, jiffies); - /* end this request now - scsi should retry it*/ - idescsi_end_request (drive, 1, 0); + pc->callback(drive); return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { @@ -369,14 +383,11 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ - if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) - printk(KERN_INFO "Packet command completed, %d bytes" - " transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) rq->errors++; - idescsi_end_request (drive, 1, 0); + pc->callback(drive); return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { @@ -718,6 +729,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, pc->scsi_cmd = cmd; pc->done = done; pc->timeout = jiffies + cmd->timeout_per_command; + pc->callback = ide_scsi_callback; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); -- cgit v0.10.2 From cdca5c1f3b769eb2cdfc9cadc254cb74ba73c7d6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:02 +0200 Subject: ide-scsi: add more debugging to idescsi_pc_intr() Add more debugging to idescsi_pc_intr() to match ide-tape's idetape_pc_intr(). While at it: * Correct the first debug message. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index c0b39b9..ec9a5de 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -364,7 +364,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) u16 bcount; u8 stat, ireason; - debug_log("Reached %s interrupt handler\n", __func__); + debug_log("Enter %s - interrupt handler\n", __func__); if (pc->flags & PC_FLAG_TIMEDOUT) { pc->callback(drive); @@ -383,10 +383,16 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ + debug_log("Packet command completed, %d bytes transferred\n", + pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { + /* Error detected */ + debug_log("%s: I/O error\n", drive->name); + rq->errors++; + } pc->callback(drive); return ide_stopped; } @@ -457,6 +463,9 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) pc->xferred += bcount; pc->cur_pos += bcount; + debug_log("[cmd %x] transferred %d bytes on that intr.\n", + pc->c[0], bcount); + /* And set the interrupt handler again */ ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); return ide_started; -- cgit v0.10.2 From 55d82bfa6763d6761670d740ab3bac2f1c042d87 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:03 +0200 Subject: ide-{floppy,scsi}: read Status Register before stopping DMA engine Read Status Register before stopping DMA engine to match ide-tape device driver - it should be safe and shouldn't affect anything. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 502ef9d..70aef97 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -399,6 +399,9 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) debug_log("Enter %s - interrupt handler\n", __func__); + /* Clear the interrupt */ + stat = ide_read_status(drive); + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { dma_error = hwif->dma_ops->dma_end(drive); if (dma_error) { @@ -412,9 +415,6 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) debug_log("%s: DMA finished\n", drive->name); } - /* Clear the interrupt */ - stat = ide_read_status(drive); - /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { debug_log("Packet command completed, %d bytes transferred\n", diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index ec9a5de..ada733c 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -370,6 +370,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) pc->callback(drive); return ide_stopped; } + + /* Clear the interrupt */ + stat = ide_read_status(drive); + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { if (hwif->dma_ops->dma_end(drive)) pc->flags |= PC_FLAG_DMA_ERROR; @@ -378,9 +382,6 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) debug_log("%s: DMA finished\n", drive->name); } - /* Clear the interrupt */ - stat = ide_read_status(drive); - if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ debug_log("Packet command completed, %d bytes transferred\n", -- cgit v0.10.2 From 646c0cb6c430f8d3ad3769dd1518fe664ff0ce27 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:03 +0200 Subject: ide: add ide_pc_intr() helper * ide-tape.c: add 'drive' argument to idetape_update_buffers(). * Add generic ide_pc_intr() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. * ide-tape.c: remove no longer needed DBG_PC_INTR. There should be no functional changes caused by this patch (unless the debugging is explicitely compiled in). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 932a83a..2802031 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -5,6 +5,183 @@ #include #include #include +#include + +#ifdef DEBUG +#define debug_log(fmt, args...) \ + printk(KERN_INFO "ide: " fmt, ## args) +#else +#define debug_log(fmt, args...) do {} while (0) +#endif + +/* TODO: unify the code thus making some arguments go away */ +ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry, + void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *), + void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *), + void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int)) +{ + ide_hwif_t *hwif = drive->hwif; + xfer_func_t *xferfunc; + unsigned int temp; + u16 bcount; + u8 stat, ireason, scsi = drive->scsi; + + debug_log("Enter %s - interrupt handler\n", __func__); + + if (pc->flags & PC_FLAG_TIMEDOUT) { + pc->callback(drive); + return ide_stopped; + } + + /* Clear the interrupt */ + stat = ide_read_status(drive); + + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + if (hwif->dma_ops->dma_end(drive) || + (drive->media == ide_tape && !scsi && (stat & ERR_STAT))) { + if (drive->media == ide_floppy && !scsi) + printk(KERN_ERR "%s: DMA %s error\n", + drive->name, rq_data_dir(pc->rq) + ? "write" : "read"); + pc->flags |= PC_FLAG_DMA_ERROR; + } else { + pc->xferred = pc->req_xfer; + if (update_buffers) + update_buffers(drive, pc); + } + debug_log("%s: DMA finished\n", drive->name); + } + + /* No more interrupts */ + if ((stat & DRQ_STAT) == 0) { + debug_log("Packet command completed, %d bytes transferred\n", + pc->xferred); + + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; + + local_irq_enable_in_hardirq(); + + if (drive->media == ide_tape && !scsi && + (stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) + stat &= ~ERR_STAT; + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { + /* Error detected */ + debug_log("%s: I/O error\n", drive->name); + + if (drive->media != ide_tape || scsi) { + pc->rq->errors++; + if (scsi) + goto cmd_finished; + } + + if (pc->c[0] == REQUEST_SENSE) { + printk(KERN_ERR "%s: I/O error in request sense" + " command\n", drive->name); + return ide_do_reset(drive); + } + + debug_log("[cmd %x]: check condition\n", pc->c[0]); + + /* Retry operation */ + retry_pc(drive); + /* queued, but not started */ + return ide_stopped; + } +cmd_finished: + pc->error = 0; + if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && + (stat & SEEK_STAT) == 0) { + dsc_handle(drive); + return ide_stopped; + } + /* Command finished - Call the callback function */ + pc->callback(drive); + return ide_stopped; + } + + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; + printk(KERN_ERR "%s: The device wants to issue more interrupts " + "in DMA mode\n", drive->name); + ide_dma_off(drive); + return ide_do_reset(drive); + } + /* Get the number of bytes to transfer on this interrupt. */ + bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | + hwif->INB(hwif->io_ports.lbam_addr); + + ireason = hwif->INB(hwif->io_ports.nsect_addr); + + if (ireason & CD) { + printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); + return ide_do_reset(drive); + } + if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { + /* Hopefully, we will never get here */ + printk(KERN_ERR "%s: We wanted to %s, but the device wants us " + "to %s!\n", drive->name, + (ireason & IO) ? "Write" : "Read", + (ireason & IO) ? "Read" : "Write"); + return ide_do_reset(drive); + } + if (!(pc->flags & PC_FLAG_WRITING)) { + /* Reading - Check that we have enough space */ + temp = pc->xferred + bcount; + if (temp > pc->req_xfer) { + if (temp > pc->buf_size) { + printk(KERN_ERR "%s: The device wants to send " + "us more data than expected - " + "discarding data\n", + drive->name); + if (scsi) + temp = pc->buf_size - pc->xferred; + else + temp = 0; + if (temp) { + if (pc->sg) + io_buffers(drive, pc, temp, 0); + else + hwif->input_data(drive, NULL, + pc->cur_pos, temp); + printk(KERN_ERR "%s: transferred %d of " + "%d bytes\n", + drive->name, + temp, bcount); + } + pc->xferred += temp; + pc->cur_pos += temp; + ide_pad_transfer(drive, 0, bcount - temp); + ide_set_handler(drive, handler, timeout, + expiry); + return ide_started; + } + debug_log("The device wants to send us more data than " + "expected - allowing transfer\n"); + } + xferfunc = hwif->input_data; + } else + xferfunc = hwif->output_data; + + if ((drive->media == ide_floppy && !scsi && !pc->buf) || + (drive->media == ide_tape && !scsi && pc->bh) || + (scsi && pc->sg)) + io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING)); + else + xferfunc(drive, NULL, pc->cur_pos, bcount); + + /* Update the current position */ + pc->xferred += bcount; + pc->cur_pos += bcount; + + debug_log("[cmd %x] transferred %d bytes on that intr.\n", + pc->c[0], bcount); + + /* And set the interrupt handler again */ + ide_set_handler(drive, handler, timeout, expiry); + return ide_started; +} +EXPORT_SYMBOL_GPL(ide_pc_intr); static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) { diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 70aef97..0f3602a 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -388,132 +388,10 @@ static void idefloppy_retry_pc(ide_drive_t *drive) static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - ide_hwif_t *hwif = drive->hwif; - struct ide_atapi_pc *pc = floppy->pc; - struct request *rq = pc->rq; - xfer_func_t *xferfunc; - unsigned int temp; - int dma_error = 0; - u16 bcount; - u8 stat, ireason; - - debug_log("Enter %s - interrupt handler\n", __func__); - - /* Clear the interrupt */ - stat = ide_read_status(drive); - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - dma_error = hwif->dma_ops->dma_end(drive); - if (dma_error) { - printk(KERN_ERR "%s: DMA %s error\n", drive->name, - rq_data_dir(rq) ? "write" : "read"); - pc->flags |= PC_FLAG_DMA_ERROR; - } else { - pc->xferred = pc->req_xfer; - idefloppy_update_buffers(drive, pc); - } - debug_log("%s: DMA finished\n", drive->name); - } - - /* No more interrupts */ - if ((stat & DRQ_STAT) == 0) { - debug_log("Packet command completed, %d bytes transferred\n", - pc->xferred); - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - - local_irq_enable_in_hardirq(); - - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { - /* Error detected */ - debug_log("%s: I/O error\n", drive->name); - rq->errors++; - if (pc->c[0] == GPCMD_REQUEST_SENSE) { - printk(KERN_ERR "%s: I/O error in request sense" - " command\n", drive->name); - return ide_do_reset(drive); - } - - debug_log("[cmd %x]: check condition\n", pc->c[0]); - - /* Retry operation */ - idefloppy_retry_pc(drive); - /* queued, but not started */ - return ide_stopped; - } - pc->error = 0; - /* Command finished - Call the callback function */ - pc->callback(drive); - return ide_stopped; - } - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "%s: The device wants to issue more interrupts " - "in DMA mode\n", drive->name); - ide_dma_off(drive); - return ide_do_reset(drive); - } - - /* Get the number of bytes to transfer */ - bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | - hwif->INB(hwif->io_ports.lbam_addr); - /* on this interrupt */ - ireason = hwif->INB(hwif->io_ports.nsect_addr); - - if (ireason & CD) { - printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); - return ide_do_reset(drive); - } - if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { - /* Hopefully, we will never get here */ - printk(KERN_ERR "%s: We wanted to %s, but the device wants us " - "to %s!\n", drive->name, - (ireason & IO) ? "Write" : "Read", - (ireason & IO) ? "Read" : "Write"); - return ide_do_reset(drive); - } - if (!(pc->flags & PC_FLAG_WRITING)) { - /* Reading - Check that we have enough space */ - temp = pc->xferred + bcount; - if (temp > pc->req_xfer) { - if (temp > pc->buf_size) { - printk(KERN_ERR "%s: The device wants to send " - "us more data than expected - " - "discarding data\n", - drive->name); - ide_pad_transfer(drive, 0, bcount); - - ide_set_handler(drive, - &idefloppy_pc_intr, - IDEFLOPPY_WAIT_CMD, - NULL); - return ide_started; - } - debug_log("The device wants to send us more data than " - "expected - allowing transfer\n"); - } - } - if (pc->flags & PC_FLAG_WRITING) - xferfunc = hwif->output_data; - else - xferfunc = hwif->input_data; - - if (pc->buf) - xferfunc(drive, NULL, pc->cur_pos, bcount); - else - ide_floppy_io_buffers(drive, pc, bcount, - !!(pc->flags & PC_FLAG_WRITING)); - - /* Update the current position */ - pc->xferred += bcount; - pc->cur_pos += bcount; - - debug_log("[cmd %x] transferred %d bytes on that intr.\n", - pc->c[0], bcount); - /* And set the interrupt handler again */ - ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); - return ide_started; + return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr, + IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers, + idefloppy_retry_pc, NULL, ide_floppy_io_buffers); } /* diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 10f2d33..0afa109 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -56,8 +56,6 @@ enum { DBG_PROCS = (1 << 3), /* buffer alloc info (pc_stack & rq_stack) */ DBG_PCRQ_STACK = (1 << 4), - /* IRQ handler (always log debug info if debugging is on) */ - DBG_PC_INTR = (1 << 5), }; /* define to see debug info */ @@ -66,7 +64,7 @@ enum { #if IDETAPE_DEBUG_LOG #define debug_log(lvl, fmt, args...) \ { \ - if ((lvl & DBG_PC_INTR) || (tape->debug_mask & lvl)) \ + if (tape->debug_mask & lvl) \ printk(KERN_INFO "ide-tape: " fmt, ## args); \ } #else @@ -441,7 +439,7 @@ static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, } } -static void idetape_update_buffers(struct ide_atapi_pc *pc) +static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct idetape_bh *bh = pc->bh; int count; @@ -526,7 +524,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) pc->xferred = pc->req_xfer - tape->blk_size * get_unaligned_be32(&sense[3]); - idetape_update_buffers(pc); + idetape_update_buffers(drive, pc); } /* @@ -800,129 +798,11 @@ static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, */ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; - xfer_func_t *xferfunc; - unsigned int temp; - u16 bcount; - u8 stat, ireason; - - debug_log(DBG_PC_INTR, "Enter %s - interrupt handler\n", __func__); - - /* Clear the interrupt */ - stat = ide_read_status(drive); - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) { - pc->flags |= PC_FLAG_DMA_ERROR; - } else { - pc->xferred = pc->req_xfer; - idetape_update_buffers(pc); - } - debug_log(DBG_PC_INTR, "%s: DMA finished\n", drive->name); - } - - /* No more interrupts */ - if ((stat & DRQ_STAT) == 0) { - debug_log(DBG_PC_INTR, "Packet command completed, %d bytes" - " transferred\n", pc->xferred); - - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - local_irq_enable_in_hardirq(); - - if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) - stat &= ~ERR_STAT; - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { - /* Error detected */ - debug_log(DBG_PC_INTR, "%s: I/O error\n", drive->name); - - if (pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "%s: I/O error in request sense" - " command\n", drive->name); - return ide_do_reset(drive); - } - debug_log(DBG_PC_INTR, "[cmd %x]: check condition\n", - pc->c[0]); - - /* Retry operation */ - idetape_retry_pc(drive); - return ide_stopped; - } - pc->error = 0; - if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && - (stat & SEEK_STAT) == 0) { - ide_tape_handle_dsc(drive); - return ide_stopped; - } - /* Command finished - Call the callback function */ - pc->callback(drive); - return ide_stopped; - } - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "%s: The device wants to issue more interrupts " - "in DMA mode\n", drive->name); - ide_dma_off(drive); - return ide_do_reset(drive); - } - /* Get the number of bytes to transfer on this interrupt. */ - bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | - hwif->INB(hwif->io_ports.lbam_addr); - - ireason = hwif->INB(hwif->io_ports.nsect_addr); - - if (ireason & CD) { - printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); - return ide_do_reset(drive); - } - if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { - /* Hopefully, we will never get here */ - printk(KERN_ERR "%s: We wanted to %s, but the device wants us " - "to %s!\n", drive->name, - (ireason & IO) ? "Write" : "Read", - (ireason & IO) ? "Read" : "Write"); - return ide_do_reset(drive); - } - if (!(pc->flags & PC_FLAG_WRITING)) { - /* Reading - Check that we have enough space */ - temp = pc->xferred + bcount; - if (temp > pc->req_xfer) { - if (temp > pc->buf_size) { - printk(KERN_ERR "%s: The device wants to send " - "us more data than expected - " - "discarding data\n", - drive->name); - ide_pad_transfer(drive, 0, bcount); - ide_set_handler(drive, &idetape_pc_intr, - IDETAPE_WAIT_CMD, NULL); - return ide_started; - } - debug_log(DBG_PC_INTR, "The device wants to send us more " - "data than expected - allowing transfer\n"); - } - xferfunc = hwif->input_data; - } else { - xferfunc = hwif->output_data; - } - - if (pc->bh) - ide_tape_io_buffers(drive, pc, bcount, - !!(pc->flags & PC_FLAG_WRITING)); - else - xferfunc(drive, NULL, pc->cur_pos, bcount); - - /* Update the current position */ - pc->xferred += bcount; - pc->cur_pos += bcount; - - debug_log(DBG_PC_INTR, "[cmd %x] transferred %d bytes on that intr.\n", - pc->c[0], bcount); - /* And set the interrupt handler again */ - ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); - return ide_started; + return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD, + NULL, idetape_update_buffers, idetape_retry_pc, + ide_tape_handle_dsc, ide_tape_io_buffers); } /* diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index ada733c..683bce3 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -356,120 +356,11 @@ static int idescsi_expiry(ide_drive_t *drive) static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - ide_hwif_t *hwif = drive->hwif; struct ide_atapi_pc *pc = scsi->pc; - struct request *rq = pc->rq; - xfer_func_t *xferfunc; - unsigned int temp; - u16 bcount; - u8 stat, ireason; - - debug_log("Enter %s - interrupt handler\n", __func__); - - if (pc->flags & PC_FLAG_TIMEDOUT) { - pc->callback(drive); - return ide_stopped; - } - - /* Clear the interrupt */ - stat = ide_read_status(drive); - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - if (hwif->dma_ops->dma_end(drive)) - pc->flags |= PC_FLAG_DMA_ERROR; - else - pc->xferred = pc->req_xfer; - debug_log("%s: DMA finished\n", drive->name); - } - - if ((stat & DRQ_STAT) == 0) { - /* No more interrupts */ - debug_log("Packet command completed, %d bytes transferred\n", - pc->xferred); - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - local_irq_enable_in_hardirq(); - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { - /* Error detected */ - debug_log("%s: I/O error\n", drive->name); - - rq->errors++; - } - pc->callback(drive); - return ide_stopped; - } - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "%s: The device wants to issue more interrupts " - "in DMA mode\n", drive->name); - ide_dma_off(drive); - return ide_do_reset(drive); - } - bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | - hwif->INB(hwif->io_ports.lbam_addr); - ireason = hwif->INB(hwif->io_ports.nsect_addr); - - if (ireason & CD) { - printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); - return ide_do_reset (drive); - } - if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { - /* Hopefully, we will never get here */ - printk(KERN_ERR "%s: We wanted to %s, but the device wants us " - "to %s!\n", drive->name, - (ireason & IO) ? "Write" : "Read", - (ireason & IO) ? "Read" : "Write"); - return ide_do_reset(drive); - } - if (!(pc->flags & PC_FLAG_WRITING)) { - temp = pc->xferred + bcount; - if (temp > pc->req_xfer) { - if (temp > pc->buf_size) { - printk(KERN_ERR "%s: The device wants to send " - "us more data than expected - " - "discarding data\n", - drive->name); - temp = pc->buf_size - pc->xferred; - if (temp) { - if (pc->sg) - ide_scsi_io_buffers(drive, pc, - temp, 0); - else - hwif->input_data(drive, NULL, - pc->cur_pos, temp); - printk(KERN_ERR "%s: transferred %d of " - "%d bytes\n", - drive->name, - temp, bcount); - } - pc->xferred += temp; - pc->cur_pos += temp; - ide_pad_transfer(drive, 0, bcount - temp); - ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - return ide_started; - } - debug_log("The device wants to send us more data than " - "expected - allowing transfer\n"); - } - xferfunc = hwif->input_data; - } else - xferfunc = hwif->output_data; - - if (pc->sg) - ide_scsi_io_buffers(drive, pc, bcount, - !!(pc->flags & PC_FLAG_WRITING)); - else - xferfunc(drive, NULL, pc->cur_pos, bcount); - - /* Update the current position */ - pc->xferred += bcount; - pc->cur_pos += bcount; - - debug_log("[cmd %x] transferred %d bytes on that intr.\n", - pc->c[0], bcount); - /* And set the interrupt handler again */ - ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - return ide_started; + return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc), + idescsi_expiry, NULL, NULL, NULL, + ide_scsi_io_buffers); } static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) diff --git a/include/linux/ide.h b/include/linux/ide.h index fee07a7..ac4eeb2 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -968,6 +968,12 @@ extern int drive_is_ready(ide_drive_t *); void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); +ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry, + void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *), + void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *), + void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int, + int)); ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, ide_handler_t *, unsigned int, ide_expiry_t *); ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *, -- cgit v0.10.2 From cd2abbfec84f43db740483daf4ea528d49d8858f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 15 Jul 2008 21:22:03 +0200 Subject: ide-tape: unify idetape_create_read/write_cmd A straightforward one. There should be no functional change resulting from this change. [bart: minor fixups] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0afa109..6e1233b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -952,40 +952,29 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) return ide_stopped; } -static void idetape_create_read_cmd(idetape_tape_t *tape, - struct ide_atapi_pc *pc, - unsigned int length, struct idetape_bh *bh) +static void ide_tape_create_rw_cmd(idetape_tape_t *tape, + struct ide_atapi_pc *pc, unsigned int length, + struct idetape_bh *bh, u8 opcode) { idetape_init_pc(pc); - pc->c[0] = READ_6; put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->bh = bh; - atomic_set(&bh->b_count, 0); pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; if (pc->req_xfer == tape->buffer_size) pc->flags |= PC_FLAG_DMA_OK; -} -static void idetape_create_write_cmd(idetape_tape_t *tape, - struct ide_atapi_pc *pc, - unsigned int length, struct idetape_bh *bh) -{ - idetape_init_pc(pc); - pc->c[0] = WRITE_6; - put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); - pc->c[1] = 1; - pc->flags |= PC_FLAG_WRITING; - pc->bh = bh; - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); - pc->buf = NULL; - pc->buf_size = length * tape->blk_size; - pc->req_xfer = pc->buf_size; - if (pc->req_xfer == tape->buffer_size) - pc->flags |= PC_FLAG_DMA_OK; + if (opcode == READ_6) { + pc->c[0] = READ_6; + atomic_set(&bh->b_count, 0); + } else if (opcode == WRITE_6) { + pc->c[0] = WRITE_6; + pc->flags |= PC_FLAG_WRITING; + pc->b_data = bh->b_data; + pc->b_count = atomic_read(&bh->b_count); + } } static ide_startstop_t idetape_do_request(ide_drive_t *drive, @@ -1062,14 +1051,16 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } if (rq->cmd[0] & REQ_IDETAPE_READ) { pc = idetape_next_pc_storage(drive); - idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, - (struct idetape_bh *)rq->special); + ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors, + (struct idetape_bh *)rq->special, + READ_6); goto out; } if (rq->cmd[0] & REQ_IDETAPE_WRITE) { pc = idetape_next_pc_storage(drive); - idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, - (struct idetape_bh *)rq->special); + ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors, + (struct idetape_bh *)rq->special, + WRITE_6); goto out; } if (rq->cmd[0] & REQ_IDETAPE_PC1) { -- cgit v0.10.2 From cbbc4e818de4451cdef75a112b7fc8a523d5d2a0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 15 Jul 2008 21:22:03 +0200 Subject: ide-floppy: fix unfortunate function naming mv idefloppy_transfer_pc1 idefloppy_start_pc_transfer mv idefloppy_transfer_pc2 idefloppy_transfer_pc which describes their functionality and disambiguates them. There should be no functionality change introduced by this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 0f3602a..b368943 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -399,12 +399,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) * service routine. In interrupt mode, the device sends an interrupt to signal * that it is ready to receive a packet. However, we need to delay about 2-3 * ticks before issuing the packet or we gets in trouble. - * - * So, follow carefully. transfer_pc1 is called as an interrupt (or directly). - * In either case, when the device says it's ready for a packet, we schedule - * the packet transfer to occur about 2-3 ticks later in transfer_pc2. */ -static int idefloppy_transfer_pc2(ide_drive_t *drive) +static int idefloppy_transfer_pc(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -415,7 +411,13 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive) return IDEFLOPPY_WAIT_CMD; } -static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) + +/* + * Called as an interrupt (or directly). When the device says it's ready for a + * packet, we schedule the packet transfer to occur about 2-3 ticks later in + * transfer_pc. + */ +static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; struct ide_atapi_pc *pc = floppy->pc; @@ -432,7 +434,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) */ if (pc->flags & PC_FLAG_ZIP_DRIVE) { timeout = floppy->ticks; - expiry = &idefloppy_transfer_pc2; + expiry = &idefloppy_transfer_pc; } else { timeout = IDEFLOPPY_WAIT_CMD; expiry = NULL; @@ -483,7 +485,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->retries++; - return ide_issue_pc(drive, pc, idefloppy_transfer_pc1, + return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer, IDEFLOPPY_WAIT_CMD, NULL); } -- cgit v0.10.2