From bc775eac63c16dbcfabc4c6e949c0228edf3e11f Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 29 Apr 2008 06:40:37 -0600 Subject: [POWERPC] mpc5200: Fix unterminated of_device_id table If CONFIG_PPC_MPC5121 is not set, then the of_device_id table for the mpc5200 serial driver will not get terminated with a NULL entry. Signed-off-by: Grant Likely diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index d93b357..7a3625f 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -1221,8 +1221,8 @@ static struct of_device_id mpc52xx_uart_of_match[] = { #endif #ifdef CONFIG_PPC_MPC512x { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, }, - {}, #endif + {}, }; static int __devinit -- cgit v0.10.2 From f800ab44f5cd094743dc3df371bcf986375f5774 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 16 Apr 2008 01:29:54 +1000 Subject: [POWERPC] mpc5200: add interrupt type function Add a set_type function for external (GPIO) interrupts. Signed-off-by: Juergen Beisert Signed-off-by: Sascha Hauer Signed-off-by: Grant Likely diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index d0dead8..8479394 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -18,6 +18,7 @@ #undef DEBUG +#include #include #include #include @@ -109,11 +110,48 @@ static void mpc52xx_extirq_ack(unsigned int virq) io_be_setbit(&intr->ctrl, 27-l2irq); } +static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type) +{ + u32 ctrl_reg, type; + int irq; + int l2irq; + + irq = irq_map[virq].hwirq; + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET; + + pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__, irq, l2irq, flow_type); + + switch (flow_type) { + case IRQF_TRIGGER_HIGH: + type = 0; + break; + case IRQF_TRIGGER_RISING: + type = 1; + break; + case IRQF_TRIGGER_FALLING: + type = 2; + break; + case IRQF_TRIGGER_LOW: + type = 3; + break; + default: + type = 0; + } + + ctrl_reg = in_be32(&intr->ctrl); + ctrl_reg &= ~(0x3 << (22 - (l2irq * 2))); + ctrl_reg |= (type << (22 - (l2irq * 2))); + out_be32(&intr->ctrl, ctrl_reg); + + return 0; +} + static struct irq_chip mpc52xx_extirq_irqchip = { .typename = " MPC52xx IRQ[0-3] ", .mask = mpc52xx_extirq_mask, .unmask = mpc52xx_extirq_unmask, .ack = mpc52xx_extirq_ack, + .set_type = mpc52xx_extirq_set_type, }; /* -- cgit v0.10.2 From 3cd2550c736688c7f2651134e08bd5b5db5bed70 Mon Sep 17 00:00:00 2001 From: "s.hauer@pengutronix.de" Date: Fri, 25 Apr 2008 20:56:04 +1000 Subject: [POWERPC] mpc5200: add gpiolib support for mpc5200 This patch adds gpiolib support for mpc5200 SOCs. Signed-off-by: Sascha Hauer Signed-off-by: Grant Likely diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt index 5e03610..cda7a7d 100644 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt @@ -186,6 +186,12 @@ Recommended soc5200 child nodes; populate as needed for your board name device_type compatible Description ---- ----------- ---------- ----------- gpt@ gpt fsl,mpc5200-gpt General purpose timers +gpt@ gpt fsl,mpc5200-gpt-gpio General purpose + timers in GPIO mode +gpio@ fsl,mpc5200-gpio MPC5200 simple gpio + controller +gpio@ fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio + controller rtc@ rtc mpc5200-rtc Real time clock mscan@ mscan mpc5200-mscan CAN bus controller pci@ pci mpc5200-pci PCI bridge @@ -225,6 +231,12 @@ PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the compatible field. +7) GPIO controller nodes +Each GPIO controller node should have the empty property gpio-controller and +#gpio-cells set to 2. First cell is the GPIO number which is interpreted +according to the bit numbers in the GPIO control registers. The second cell +is for flags which is currently unsused. + IV - Extra Notes ================ diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index cf945d5..acd2fc8 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -44,3 +44,9 @@ config PPC_MPC5200_BUGFIX It is safe to say 'Y' here +config PPC_MPC5200_GPIO + bool "MPC5200 GPIO support" + depends on PPC_MPC52xx + select HAVE_GPIO_LIB + help + Enable gpiolib support for mpc5200 based boards diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index fe1b81b..daf0e15 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -14,3 +14,5 @@ obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o ifeq ($(CONFIG_PPC_LITE5200),y) obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o endif + +obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o \ No newline at end of file diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c new file mode 100644 index 0000000..48da5df --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c @@ -0,0 +1,465 @@ +/* + * MPC52xx gpio driver + * + * Copyright (c) 2008 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +static DEFINE_SPINLOCK(gpio_lock); + +struct mpc52xx_gpiochip { + struct of_mm_gpio_chip mmchip; + unsigned int shadow_dvo; + unsigned int shadow_gpioe; + unsigned int shadow_ddr; +}; + +/* + * GPIO LIB API implementation for wakeup GPIOs. + * + * There's a maximum of 8 wakeup GPIOs. Which of these are available + * for use depends on your board setup. + * + * 0 -> GPIO_WKUP_7 + * 1 -> GPIO_WKUP_6 + * 2 -> PSC6_1 + * 3 -> PSC6_0 + * 4 -> ETH_17 + * 5 -> PSC3_9 + * 6 -> PSC2_4 + * 7 -> PSC1_4 + * + */ +static int mpc52xx_wkup_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + unsigned int ret; + + ret = (in_8(®s->wkup_ival) >> (7 - gpio)) & 1; + + pr_debug("%s: gpio: %d ret: %d\n", __func__, gpio, ret); + + return ret; +} + +static inline void +__mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; + + if (val) + chip->shadow_dvo |= 1 << (7 - gpio); + else + chip->shadow_dvo &= ~(1 << (7 - gpio)); + + out_8(®s->wkup_dvo, chip->shadow_dvo); +} + +static void +mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_wkup_gpio_set(gc, gpio, val); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); +} + +static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio_wkup *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* set the direction */ + chip->shadow_ddr &= ~(1 << (7 - gpio)); + out_8(®s->wkup_ddr, chip->shadow_ddr); + + /* and enable the pin */ + chip->shadow_gpioe |= 1 << (7 - gpio); + out_8(®s->wkup_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +static int +mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio_wkup *regs = mm_gc->regs; + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_wkup_gpio_set(gc, gpio, val); + + /* Then set direction */ + chip->shadow_ddr |= 1 << (7 - gpio); + out_8(®s->wkup_ddr, chip->shadow_ddr); + + /* Finally enable the pin */ + chip->shadow_gpioe |= 1 << (7 - gpio); + out_8(®s->wkup_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); + + return 0; +} + +static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct mpc52xx_gpiochip *chip; + struct mpc52xx_gpio_wkup *regs; + struct of_gpio_chip *ofchip; + int ret; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + ofchip = &chip->mmchip.of_gc; + + ofchip->gpio_cells = 2; + ofchip->gc.ngpio = 8; + ofchip->gc.direction_input = mpc52xx_wkup_gpio_dir_in; + ofchip->gc.direction_output = mpc52xx_wkup_gpio_dir_out; + ofchip->gc.get = mpc52xx_wkup_gpio_get; + ofchip->gc.set = mpc52xx_wkup_gpio_set; + + ret = of_mm_gpiochip_add(ofdev->node, &chip->mmchip); + if (ret) + return ret; + + regs = chip->mmchip.regs; + chip->shadow_gpioe = in_8(®s->wkup_gpioe); + chip->shadow_ddr = in_8(®s->wkup_ddr); + chip->shadow_dvo = in_8(®s->wkup_dvo); + + return 0; +} + +static int mpc52xx_gpiochip_remove(struct of_device *ofdev) +{ + return -EBUSY; +} + +static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = { + { + .compatible = "fsl,mpc5200-gpio-wkup", + }, + {} +}; + +static struct of_platform_driver mpc52xx_wkup_gpiochip_driver = { + .name = "gpio_wkup", + .match_table = mpc52xx_wkup_gpiochip_match, + .probe = mpc52xx_wkup_gpiochip_probe, + .remove = mpc52xx_gpiochip_remove, +}; + +/* + * GPIO LIB API implementation for simple GPIOs + * + * There's a maximum of 32 simple GPIOs. Which of these are available + * for use depends on your board setup. + * The numbering reflects the bit numbering in the port registers: + * + * 0..1 > reserved + * 2..3 > IRDA + * 4..7 > ETHR + * 8..11 > reserved + * 12..15 > USB + * 16..17 > reserved + * 18..23 > PSC3 + * 24..27 > PSC2 + * 28..31 > PSC1 + */ +static int mpc52xx_simple_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + unsigned int ret; + + ret = (in_be32(®s->simple_ival) >> (31 - gpio)) & 1; + + return ret; +} + +static inline void +__mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; + + if (val) + chip->shadow_dvo |= 1 << (31 - gpio); + else + chip->shadow_dvo &= ~(1 << (31 - gpio)); + out_be32(®s->simple_dvo, chip->shadow_dvo); +} + +static void +mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + __mpc52xx_simple_gpio_set(gc, gpio, val); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); +} + +static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* set the direction */ + chip->shadow_ddr &= ~(1 << (31 - gpio)); + out_be32(®s->simple_ddr, chip->shadow_ddr); + + /* and enable the pin */ + chip->shadow_gpioe |= 1 << (31 - gpio); + out_be32(®s->simple_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +static int +mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpiochip *chip = container_of(mm_gc, + struct mpc52xx_gpiochip, mmchip); + struct mpc52xx_gpio *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + /* First set initial value */ + __mpc52xx_simple_gpio_set(gc, gpio, val); + + /* Then set direction */ + chip->shadow_ddr |= 1 << (31 - gpio); + out_be32(®s->simple_ddr, chip->shadow_ddr); + + /* Finally enable the pin */ + chip->shadow_gpioe |= 1 << (31 - gpio); + out_be32(®s->simple_gpioe, chip->shadow_gpioe); + + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); + + return 0; +} + +static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct mpc52xx_gpiochip *chip; + struct of_gpio_chip *ofchip; + struct mpc52xx_gpio *regs; + int ret; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + ofchip = &chip->mmchip.of_gc; + + ofchip->gpio_cells = 2; + ofchip->gc.ngpio = 32; + ofchip->gc.direction_input = mpc52xx_simple_gpio_dir_in; + ofchip->gc.direction_output = mpc52xx_simple_gpio_dir_out; + ofchip->gc.get = mpc52xx_simple_gpio_get; + ofchip->gc.set = mpc52xx_simple_gpio_set; + + ret = of_mm_gpiochip_add(ofdev->node, &chip->mmchip); + if (ret) + return ret; + + regs = chip->mmchip.regs; + chip->shadow_gpioe = in_be32(®s->simple_gpioe); + chip->shadow_ddr = in_be32(®s->simple_ddr); + chip->shadow_dvo = in_be32(®s->simple_dvo); + + return 0; +} + +static const struct of_device_id mpc52xx_simple_gpiochip_match[] = { + { + .compatible = "fsl,mpc5200-gpio", + }, + {} +}; + +static struct of_platform_driver mpc52xx_simple_gpiochip_driver = { + .name = "gpio", + .match_table = mpc52xx_simple_gpiochip_match, + .probe = mpc52xx_simple_gpiochip_probe, + .remove = mpc52xx_gpiochip_remove, +}; + +/* + * GPIO LIB API implementation for gpt GPIOs. + * + * Each gpt only has a single GPIO. + */ +static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpt __iomem *regs = mm_gc->regs; + unsigned int ret; + + return (in_be32(®s->status) & (1 << (31 - 23))) ? 1 : 0; + + return ret; +} + +static void +mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpt __iomem *regs = mm_gc->regs; + + if (val) + out_be32(®s->mode, 0x34); + else + out_be32(®s->mode, 0x24); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); +} + +static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct mpc52xx_gpt *regs = mm_gc->regs; + + out_be32(®s->mode, 0x04); + + return 0; +} + +static int +mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + mpc52xx_gpt_gpio_set(gc, gpio, val); + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); + + return 0; +} + +static int __devinit mpc52xx_gpt_gpiochip_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct of_mm_gpio_chip *mmchip; + struct of_gpio_chip *chip; + + mmchip = kzalloc(sizeof(*mmchip), GFP_KERNEL); + if (!mmchip) + return -ENOMEM; + + chip = &mmchip->of_gc; + + chip->gpio_cells = 2; + chip->gc.ngpio = 1; + chip->gc.direction_input = mpc52xx_gpt_gpio_dir_in; + chip->gc.direction_output = mpc52xx_gpt_gpio_dir_out; + chip->gc.get = mpc52xx_gpt_gpio_get; + chip->gc.set = mpc52xx_gpt_gpio_set; + + return of_mm_gpiochip_add(ofdev->node, mmchip); +} + +static const struct of_device_id mpc52xx_gpt_gpiochip_match[] = { + { + .compatible = "fsl,mpc5200-gpt-gpio", + }, + {} +}; + +static struct of_platform_driver mpc52xx_gpt_gpiochip_driver = { + .name = "gpio_gpt", + .match_table = mpc52xx_gpt_gpiochip_match, + .probe = mpc52xx_gpt_gpiochip_probe, + .remove = mpc52xx_gpiochip_remove, +}; + +static int __init mpc52xx_gpio_init(void) +{ + if (of_register_platform_driver(&mpc52xx_wkup_gpiochip_driver)) + printk(KERN_ERR "Unable to register wakeup GPIO driver\n"); + + if (of_register_platform_driver(&mpc52xx_simple_gpiochip_driver)) + printk(KERN_ERR "Unable to register simple GPIO driver\n"); + + if (of_register_platform_driver(&mpc52xx_gpt_gpiochip_driver)) + printk(KERN_ERR "Unable to register gpt GPIO driver\n"); + + return 0; +} + + +/* Make sure we get initialised before anyone else tries to use us */ +subsys_initcall(mpc52xx_gpio_init); + +/* No exit call at the moment as we cannot unregister of gpio chips */ + +MODULE_DESCRIPTION("Freescale MPC52xx gpio driver"); +MODULE_AUTHOR("Sascha Hauer Date: Fri, 25 Apr 2008 23:48:05 +1000 Subject: [POWERPC] mpc5200: add Phytec pcm030 board support Add board support for the Phytec pcm030 mpc5200b based board. It does not need any platform specific fixups and as such is handled as a mpc5200 simple platform. Signed-off-by: Sascha Hauer Signed-off-by: Grant Likely diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts new file mode 100644 index 0000000..7c1bb95 --- /dev/null +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -0,0 +1,363 @@ +/* + * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source + * + * Copyright 2006 Pengutronix + * Sascha Hauer + * Copyright 2007 Pengutronix + * Juergen Beisert + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "phytec,pcm030"; + compatible = "phytec,pcm030"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; /* L1, 16K */ + i-cache-size = <0x4000>; /* L1, 16K */ + timebase-frequency = <0>; /* From Bootloader */ + bus-frequency = <0>; /* From Bootloader */ + clock-frequency = <0>; /* From Bootloader */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; /* 64MB */ + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0x0 0xf0000000 0x0000c000>; + bus-frequency = <0>; /* From bootloader */ + system-frequency = <0>; /* From bootloader */ + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + /* 5200 interrupts are encoded into two levels; */ + interrupt-controller; + #interrupt-cells = <3>; + device_type = "interrupt-controller"; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { /* General Purpose Timer */ + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + cell-index = <0>; + reg = <0x600 0x10>; + interrupts = <0x1 0x9 0x0>; + interrupt-parent = <&mpc5200_pic>; + fsl,has-wdt; + }; + + timer@610 { /* General Purpose Timer */ + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + cell-index = <1>; + reg = <0x610 0x10>; + interrupts = <0x1 0xa 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpt2: timer@620 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + cell-index = <2>; + reg = <0x620 0x10>; + interrupts = <0x1 0xb 0x0>; + interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + cell-index = <3>; + reg = <0x630 0x10>; + interrupts = <0x1 0xc 0x0>; + interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + cell-index = <4>; + reg = <0x640 0x10>; + interrupts = <0x1 0xd 0x0>; + interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + cell-index = <5>; + reg = <0x650 0x10>; + interrupts = <0x1 0xe 0x0>; + interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt6: timer@660 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + cell-index = <6>; + reg = <0x660 0x10>; + interrupts = <0x1 0xf 0x0>; + interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt7: timer@670 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + cell-index = <7>; + reg = <0x670 0x10>; + interrupts = <0x1 0x10 0x0>; + interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + device_type = "rtc"; + reg = <0x800 0x100>; + interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + cell-index = <0>; + interrupts = <0x2 0x11 0x0>; + interrupt-parent = <&mpc5200_pic>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + cell-index = <1>; + interrupts = <0x2 0x12 0x0>; + interrupt-parent = <&mpc5200_pic>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <0x1 0x7 0x0>; + interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio-wkup@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>; + interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <0x2 0x6 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + dma-controller@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0 + 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0 + 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0 + 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + ac97@2000 { /* PSC1 in ac97 mode */ + device_type = "sound"; + compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; + cell-index = <0>; + reg = <0x2000 0x100>; + interrupts = <0x2 0x2 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + /* PSC2 port is used by CAN1/2 */ + + serial@2400 { /* PSC3 in UART mode */ + device_type = "serial"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + port-number = <0>; + cell-index = <2>; + reg = <0x2400 0x100>; + interrupts = <0x2 0x3 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + /* PSC4 is ??? */ + + /* PSC5 is ??? */ + + serial@2c00 { /* PSC6 in UART mode */ + device_type = "serial"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + port-number = <1>; + cell-index = <5>; + reg = <0x2c00 0x100>; + interrupts = <0x2 0x4 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + ethernet@3000 { + device_type = "network"; + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [00 00 00 00 00 00]; + interrupts = <0x2 0x5 0x0>; + interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */ + interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */ + interrupt-parent = <&mpc5200_pic>; + + phy0:ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0x0>; + }; + }; + + ata@3a00 { + device_type = "ata"; + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <0x2 0x7 0x0>; + interrupt-parent = <&mpc5200_pic>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + cell-index = <0>; + reg = <0x3d00 0x40>; + interrupts = <0x2 0xf 0x0>; + interrupt-parent = <&mpc5200_pic>; + fsl5200-clocking; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + cell-index = <1>; + reg = <0x3d40 0x40>; + interrupts = <0x2 0x10 0x0>; + interrupt-parent = <&mpc5200_pic>; + fsl5200-clocking; + rtc@51 { + device_type = "rtc"; + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + /* FIXME: EEPROM */ + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; + reg = <0x8000 0x4000>; + }; + + /* This is only an example device to show the usage of gpios. It maps all available + * gpios to the "gpio-provider" device. + */ + gpio { + compatible = "gpio-provider"; + + /* mpc52xx exp.con patchfield */ + gpios = <&gpio_wkup 0 0 /* GPIO_WKUP_7 11d jp13-3 */ + &gpio_wkup 1 0 /* GPIO_WKUP_6 14c */ + &gpio_wkup 6 0 /* PSC2_4 43c x5-11 */ + &gpio_simple 2 0 /* IRDA_1 24c x7-6 set GPS_PORT_CONFIG[IRDA] = 0 */ + &gpio_simple 3 0 /* IRDA_0 x8-5 set GPS_PORT_CONFIG[IRDA] = 0 */ + &gpt2 0 0 /* timer2 12d x4-4 */ + &gpt3 0 0 /* timer3 13d x6-4 */ + &gpt4 0 0 /* timer4 61c x2-16 */ + &gpt5 0 0 /* timer5 44c x7-11 */ + &gpt6 0 0 /* timer6 60c x8-15 */ + &gpt7 0 0 /* timer7 36a x17-9 */ + >; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */ + 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3 + 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3 + 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3 + + 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */ + 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3 + 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3 + 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>; + clock-frequency = <0>; // From boot loader + interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>; + }; +}; diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig new file mode 100644 index 0000000..2c2c2bf --- /dev/null +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -0,0 +1,1109 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25 +# Fri Apr 25 14:46:54 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="trunk" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set +CONFIG_PPC_MPC52xx=y +CONFIG_PPC_MPC5200_SIMPLE=y +# CONFIG_PPC_EFIKA is not set +# CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MPC5200_BUGFIX is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_PPC_BESTCOMM=y +CONFIG_PPC_BESTCOMM_ATA=y +CONFIG_PPC_BESTCOMM_FEC=y +CONFIG_PPC_BESTCOMM_GEN_BD=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +CONFIG_PATA_MPC52xx=m +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_FEC_MPC52xx=y +CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MPC52xx=y +CONFIG_SERIAL_MPC52xx_CONSOLE=y +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600 +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +CONFIG_SENSORS_EEPROM=m +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_HCD_PPC_SOC is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +# CONFIG_USB_OHCI_HCD_PCI is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=m +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index c48b82b..a3bda0b 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static char *board[] __initdata = { "promess,motionpro", + "phytec,pcm030", "schindler,cm5200", "tqc,tqm5200", NULL -- cgit v0.10.2 From 8f3ba2dc811228213bcbdc2c8b389a8d6fa66c09 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 16 Apr 2008 01:44:39 +1000 Subject: [POWERPC] mpc5200: Fix FEC error handling on FIFO errors The error handling for the mpc5200 fec interrupt is broken. The intended behaviour is like this: * If one of FEC_IEVENT_RFIFO_ERROR and FEC_IEVENT_XFIFO_ERROR happens, the datasheet says (MPC5200B User's Guide R1.2, p. 14-13): "When this occurs, software must ensure both the FIFO Controller and BestComm are soft-reset". * On any other error (non-TFINT) interrupt, just issue a debug message. Signed-off-by: Sascha Hauer Signed-off-by: Grant Likely diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index e5e6352..d21b7ab 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -491,20 +491,23 @@ static irqreturn_t mpc52xx_fec_interrupt(int irq, void *dev_id) out_be32(&fec->ievent, ievent); /* clear pending events */ - if (ievent & ~(FEC_IEVENT_RFIFO_ERROR | FEC_IEVENT_XFIFO_ERROR)) { - if (ievent & ~FEC_IEVENT_TFINT) - dev_dbg(&dev->dev, "ievent: %08x\n", ievent); + /* on fifo error, soft-reset fec */ + if (ievent & (FEC_IEVENT_RFIFO_ERROR | FEC_IEVENT_XFIFO_ERROR)) { + + if (net_ratelimit() && (ievent & FEC_IEVENT_RFIFO_ERROR)) + dev_warn(&dev->dev, "FEC_IEVENT_RFIFO_ERROR\n"); + if (net_ratelimit() && (ievent & FEC_IEVENT_XFIFO_ERROR)) + dev_warn(&dev->dev, "FEC_IEVENT_XFIFO_ERROR\n"); + + mpc52xx_fec_reset(dev); + + netif_wake_queue(dev); return IRQ_HANDLED; } - if (net_ratelimit() && (ievent & FEC_IEVENT_RFIFO_ERROR)) - dev_warn(&dev->dev, "FEC_IEVENT_RFIFO_ERROR\n"); - if (net_ratelimit() && (ievent & FEC_IEVENT_XFIFO_ERROR)) - dev_warn(&dev->dev, "FEC_IEVENT_XFIFO_ERROR\n"); + if (ievent & ~FEC_IEVENT_TFINT) + dev_dbg(&dev->dev, "ievent: %08x\n", ievent); - mpc52xx_fec_reset(dev); - - netif_wake_queue(dev); return IRQ_HANDLED; } -- cgit v0.10.2 From a2884f37b6fe0074df70ebeb3a6c54201267663c Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 29 Apr 2008 07:19:07 -0600 Subject: [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format Signed-off-by: Grant Likely diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index c6ca631..2f74cc4 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -10,11 +10,7 @@ * option) any later version. */ -/* - * WARNING: Do not depend on this tree layout remaining static just yet. - * The MPC5200 device tree conventions are still in flux - * Keep an eye on the linuxppc-dev mailing list for more details - */ +/dts-v1/; / { model = "schindler,cm5200"; @@ -29,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -41,34 +37,34 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; // 64MB + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; - mpc5200_pic: pic@500 { + mpc5200_pic: interrupt-controller@500 { // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -76,108 +72,108 @@ timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <610 10>; - interrupts = <1 a 0>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <620 10>; - interrupts = <1 b 0>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <630 10>; - interrupts = <1 c 0>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <640 10>; - interrupts = <1 d 0>; + reg = <0x640 0x10>; + interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <650 10>; - interrupts = <1 e 0>; + reg = <0x650 0x10>; + interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <660 10>; - interrupts = <1 f 0>; + reg = <0x660 0x10>; + interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <670 10>; - interrupts = <1 10 0>; + reg = <0x670 0x10>; + interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <800 100>; + reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = ; + reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = ; - interrupts = <2 d 0 2 e 0>; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -186,7 +182,7 @@ device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <1>; // Logical port assignment - reg = <2200 100>; + reg = <0x2200 0x100>; interrupts = <2 2 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -195,7 +191,7 @@ device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <2>; // Logical port assignment - reg = <2400 100>; + reg = <0x2400 0x100>; interrupts = <2 3 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -204,7 +200,7 @@ device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <5>; // Logical port assignment - reg = <2c00 100>; + reg = <0x2c00 0x100>; interrupts = <2 4 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -212,7 +208,7 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 400>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -223,7 +219,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; @@ -237,15 +233,15 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -254,12 +250,12 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 fc000000 2000000>; + ranges = <0 0 0xfc000000 0x2000000>; // 16-bit flash device at LocalPlus Bus CS0 flash@0,0 { compatible = "cfi-flash"; - reg = <0 0 2000000>; + reg = <0 0 0x2000000>; bank-width = <2>; device-width = <2>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 09b4e16..2cf9a87 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -10,6 +10,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "fsl,lite5200"; compatible = "fsl,lite5200"; @@ -23,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -35,21 +37,21 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; // 64MB + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { @@ -58,13 +60,13 @@ #interrupt-cells = <3>; device_type = "interrupt-controller"; compatible = "fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <0>; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -73,63 +75,63 @@ timer@610 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <1>; - reg = <610 10>; - interrupts = <1 a 0>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <2>; - reg = <620 10>; - interrupts = <1 b 0>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <3>; - reg = <630 10>; - interrupts = <1 c 0>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <4>; - reg = <640 10>; - interrupts = <1 d 0>; + reg = <0x640 0x10>; + interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <5>; - reg = <650 10>; - interrupts = <1 e 0>; + reg = <0x650 0x10>; + interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <6>; - reg = <660 10>; - interrupts = <1 f 0>; + reg = <0x660 0x10>; + interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <7>; - reg = <670 10>; - interrupts = <1 10 0>; + reg = <0x670 0x10>; + interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200-rtc"; device_type = "rtc"; - reg = <800 100>; + reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -137,43 +139,43 @@ can@900 { compatible = "fsl,mpc5200-mscan"; cell-index = <0>; - interrupts = <2 11 0>; + interrupts = <2 17 0>; interrupt-parent = <&mpc5200_pic>; - reg = <900 80>; + reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200-mscan"; cell-index = <1>; - interrupts = <2 12 0>; + interrupts = <2 18 0>; interrupt-parent = <&mpc5200_pic>; - reg = <980 80>; + reg = <0x980 0x80>; }; gpio@b00 { compatible = "fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200-gpio-wkup"; - reg = ; + reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200-spi"; - reg = ; - interrupts = <2 d 0 2 e 0>; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -181,17 +183,17 @@ dma-controller@1200 { device_type = "dma-controller"; compatible = "fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 @@ -199,7 +201,7 @@ compatible = "fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment cell-index = <0>; - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -208,7 +210,7 @@ //ac97@2200 { // PSC2 // compatible = "fsl,mpc5200-psc-ac97"; // cell-index = <1>; - // reg = <2200 100>; + // reg = <0x2200 0x100>; // interrupts = <2 2 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -217,7 +219,7 @@ //i2s@2400 { // PSC3 // compatible = "fsl,mpc5200-psc-i2s"; // cell-index = <2>; - // reg = <2400 100>; + // reg = <0x2400 0x100>; // interrupts = <2 3 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -227,8 +229,8 @@ // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <3>; - // reg = <2600 100>; - // interrupts = <2 b 0>; + // reg = <0x2600 0x100>; + // interrupts = <2 11 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -237,8 +239,8 @@ // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <4>; - // reg = <2800 100>; - // interrupts = <2 c 0>; + // reg = <0x2800 0x100>; + // interrupts = <2 12 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -246,7 +248,7 @@ //spi@2c00 { // PSC6 // compatible = "fsl,mpc5200-psc-spi"; // cell-index = <5>; - // reg = <2c00 100>; + // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -254,7 +256,7 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -265,11 +267,11 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; - phy0:ethernet-phy@1 { + phy0: ethernet-phy@1 { device_type = "ethernet-phy"; reg = <1>; }; @@ -278,7 +280,7 @@ ata@3a00 { device_type = "ata"; compatible = "fsl,mpc5200-ata"; - reg = <3a00 100>; + reg = <0x3a00 0x100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -288,8 +290,8 @@ #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; cell-index = <0>; - reg = <3d00 40>; - interrupts = <2 f 0>; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -299,14 +301,14 @@ #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; cell-index = <1>; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200-sram","sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -316,18 +318,18 @@ #address-cells = <3>; device_type = "pci"; compatible = "fsl,mpc5200-pci"; - reg = ; - interrupt-map-mask = ; - interrupt-map = ; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; + interrupts = <2 8 0 2 9 0 2 10 0>; interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 2e9bc39..7bd5b9c 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -10,11 +10,7 @@ * option) any later version. */ -/* - * WARNING: Do not depend on this tree layout remaining static just yet. - * The MPC5200 device tree conventions are still in flux - * Keep an eye on the linuxppc-dev mailing list for more details - */ +/dts-v1/; / { model = "fsl,lite5200b"; @@ -29,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -41,21 +37,21 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; // 256MB + reg = <0x00000000 0x10000000>; // 256MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { @@ -64,13 +60,13 @@ #interrupt-cells = <3>; device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <0>; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -79,63 +75,63 @@ timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <1>; - reg = <610 10>; - interrupts = <1 a 0>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <2>; - reg = <620 10>; - interrupts = <1 b 0>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <3>; - reg = <630 10>; - interrupts = <1 c 0>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <4>; - reg = <640 10>; - interrupts = <1 d 0>; + reg = <0x640 0x10>; + interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <5>; - reg = <650 10>; - interrupts = <1 e 0>; + reg = <0x650 0x10>; + interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <6>; - reg = <660 10>; - interrupts = <1 f 0>; + reg = <0x660 0x10>; + interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <7>; - reg = <670 10>; - interrupts = <1 10 0>; + reg = <0x670 0x10>; + interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; device_type = "rtc"; - reg = <800 100>; + reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -143,43 +139,43 @@ can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; cell-index = <0>; - interrupts = <2 11 0>; + interrupts = <2 17 0>; interrupt-parent = <&mpc5200_pic>; - reg = <900 80>; + reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; cell-index = <1>; - interrupts = <2 12 0>; + interrupts = <2 18 0>; interrupt-parent = <&mpc5200_pic>; - reg = <980 80>; + reg = <0x980 0x80>; }; gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = ; + reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = ; - interrupts = <2 d 0 2 e 0>; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -187,17 +183,17 @@ dma-controller@1200 { device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 @@ -205,7 +201,7 @@ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment cell-index = <0>; - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -214,7 +210,7 @@ //ac97@2200 { // PSC2 // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; // cell-index = <1>; - // reg = <2200 100>; + // reg = <0x2200 0x100>; // interrupts = <2 2 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -223,7 +219,7 @@ //i2s@2400 { // PSC3 // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible // cell-index = <2>; - // reg = <2400 100>; + // reg = <0x2400 0x100>; // interrupts = <2 3 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -233,8 +229,8 @@ // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <3>; - // reg = <2600 100>; - // interrupts = <2 b 0>; + // reg = <0x2600 0x100>; + // interrupts = <2 11 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -243,8 +239,8 @@ // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <4>; - // reg = <2800 100>; - // interrupts = <2 c 0>; + // reg = <0x2800 0x100>; + // interrupts = <2 12 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -252,7 +248,7 @@ //spi@2c00 { // PSC6 // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; // cell-index = <5>; - // reg = <2c00 100>; + // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -260,7 +256,7 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 400>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -271,11 +267,11 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; - phy0:ethernet-phy@0 { + phy0: ethernet-phy@0 { device_type = "ethernet-phy"; reg = <0>; }; @@ -284,7 +280,7 @@ ata@3a00 { device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <3a00 100>; + reg = <0x3a00 0x100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -294,8 +290,8 @@ #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; cell-index = <0>; - reg = <3d00 40>; - interrupts = <2 f 0>; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -305,14 +301,14 @@ #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; cell-index = <1>; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -322,23 +318,23 @@ #address-cells = <3>; device_type = "pci"; compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = ; - interrupt-map-mask = ; - interrupt-map = ; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; + interrupts = <2 8 0 2 9 0 2 10 0>; interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 2b0dde0..9e3c921 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -10,6 +10,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "promess,motionpro"; compatible = "promess,motionpro"; @@ -23,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -35,21 +37,21 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; // 64MB + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { @@ -57,12 +59,12 @@ interrupt-controller; #interrupt-cells = <3>; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -70,118 +72,118 @@ timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <610 10>; - interrupts = <1 a 0>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <620 10>; - interrupts = <1 b 0>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <630 10>; - interrupts = <1 c 0>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <640 10>; - interrupts = <1 d 0>; + reg = <0x640 0x10>; + interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <650 10>; - interrupts = <1 e 0>; + reg = <0x650 0x10>; + interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; motionpro-led@660 { // Motion-PRO status LED compatible = "promess,motionpro-led"; label = "motionpro-statusled"; - reg = <660 10>; - interrupts = <1 f 0>; + reg = <0x660 0x10>; + interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; - blink-delay = <64>; // 100 msec + blink-delay = <100>; // 100 msec }; motionpro-led@670 { // Motion-PRO ready LED compatible = "promess,motionpro-led"; label = "motionpro-readyled"; - reg = <670 10>; - interrupts = <1 10 0>; + reg = <0x670 0x10>; + interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <800 100>; + reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; - mscan@980 { + can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 12 0>; + interrupts = <2 18 0>; interrupt-parent = <&mpc5200_pic>; - reg = <980 80>; + reg = <0x980 0x80>; }; gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = ; + reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = ; - interrupts = <2 d 0 2 e 0>; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -190,7 +192,7 @@ spi@2200 { // PSC2 compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; cell-index = <1>; - reg = <2200 100>; + reg = <0x2200 0x100>; interrupts = <2 2 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -200,15 +202,15 @@ device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <4>; // Logical port assignment - reg = <2800 100>; - interrupts = <2 c 0>; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 400>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -219,7 +221,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; @@ -231,7 +233,7 @@ ata@3a00 { compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <3a00 100>; + reg = <0x3a00 0x100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -240,21 +242,21 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { device_type = "rtc"; compatible = "dallas,ds1339"; - reg = <68>; + reg = <0x68>; }; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -262,15 +264,15 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 ff000000 01000000 - 1 0 50000000 00010000 - 2 0 50010000 00010000 - 3 0 50020000 00010000>; + ranges = <0 0 0xff000000 0x01000000 + 1 0 0x50000000 0x00010000 + 2 0 0x50010000 0x00010000 + 3 0 0x50020000 0x00010000>; // 8-bit DualPort SRAM on LocalPlus Bus CS1 kollmorgen@1,0 { compatible = "promess,motionpro-kollmorgen"; - reg = <1 0 10000>; + reg = <1 0 0x10000>; interrupts = <1 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -278,13 +280,13 @@ // 8-bit board CPLD on LocalPlus Bus CS2 cpld@2,0 { compatible = "promess,motionpro-cpld"; - reg = <2 0 10000>; + reg = <2 0 0x10000>; }; // 8-bit custom Anybus Module on LocalPlus Bus CS3 anybus@3,0 { compatible = "promess,motionpro-anybus"; - reg = <3 0 10000>; + reg = <3 0 0x10000>; }; pro_module_general@3,0 { compatible = "promess,pro_module_general"; @@ -292,13 +294,13 @@ }; pro_module_dio@3,800 { compatible = "promess,pro_module_dio"; - reg = <3 800 2>; + reg = <3 0x800 2>; }; // 16-bit flash device at LocalPlus Bus CS0 flash@0,0 { compatible = "cfi-flash"; - reg = <0 0 01000000>; + reg = <0 0 0x01000000>; bank-width = <2>; device-width = <2>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index 65bcea6..773a68e 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -10,6 +10,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "tqc,tqm5200"; compatible = "tqc,tqm5200"; @@ -23,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -35,21 +37,21 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; // 64MB + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { @@ -57,12 +59,12 @@ interrupt-controller; #interrupt-cells = <3>; compatible = "fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -70,38 +72,38 @@ gpio@b00 { compatible = "fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { compatible = "fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -110,7 +112,7 @@ device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <1>; // Logical port assignment - reg = <2200 100>; + reg = <0x2200 0x100>; interrupts = <2 2 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -119,7 +121,7 @@ device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <2>; // Logical port assignment - reg = <2400 100>; + reg = <0x2400 0x100>; interrupts = <2 3 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -127,7 +129,7 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 400>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -137,8 +139,8 @@ mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; @@ -150,7 +152,7 @@ ata@3a00 { compatible = "fsl,mpc5200-ata"; - reg = <3a00 100>; + reg = <0x3a00 0x100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -159,21 +161,21 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { device_type = "rtc"; compatible = "dallas,ds1307"; - reg = <68>; + reg = <0x68>; }; }; sram@8000 { compatible = "fsl,mpc5200-sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -182,11 +184,11 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 fc000000 02000000>; + ranges = <0 0 0xfc000000 0x02000000>; flash@0,0 { compatible = "cfi-flash"; - reg = <0 0 02000000>; + reg = <0 0 0x02000000>; bank-width = <4>; device-width = <2>; #size-cells = <1>; @@ -200,18 +202,18 @@ #address-cells = <3>; device_type = "pci"; compatible = "fsl,mpc5200-pci"; - reg = ; - interrupt-map-mask = ; - interrupt-map = ; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; + interrupts = <2 8 0 2 9 0 2 10 0>; interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 a0000000 0 01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; }; }; -- cgit v0.10.2 From 822252521651ad74a6d41e712d790e2f10838a67 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Tue, 15 Apr 2008 20:36:36 +1000 Subject: [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200 Board-specific defconfigs based on current mpc5200_defconfig, archival lite5200_defconfig, and [cm5200|motionpro|tqm5200]_defconfig from the linux-2.6-denx tree. Kernels build using these defconfigs were verified to boot with root filesystem mounted over NFS on Motion-PRO, TQM5200 and Lite5200B boards. CM5200 target was not tested due to hardware unavailability. Signed-off-by: Bartlomiej Sieka Signed-off-by: Grant Likely diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig new file mode 100644 index 0000000..c10f739 --- /dev/null +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -0,0 +1,1099 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25 +# Tue Apr 29 07:11:37 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set +CONFIG_PPC_MPC52xx=y +CONFIG_PPC_MPC5200_SIMPLE=y +# CONFIG_PPC_EFIKA is not set +# CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MPC5200_BUGFIX is not set +# CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_PPC_BESTCOMM=y +# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_FEC=y +# CONFIG_PPC_BESTCOMM_GEN_BD is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FEC_MPC52xx=y +CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MPC52xx=y +CONFIG_SERIAL_MPC52xx_CONSOLE=y +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600 +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_MPC5200_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_SOC=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig new file mode 100644 index 0000000..1a8a250 --- /dev/null +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -0,0 +1,1049 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25 +# Tue Apr 29 07:12:56 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set +CONFIG_PPC_MPC52xx=y +CONFIG_PPC_MPC5200_SIMPLE=y +# CONFIG_PPC_EFIKA is not set +CONFIG_PPC_LITE5200=y +# CONFIG_PPC_MPC5200_BUGFIX is not set +# CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_PPC_BESTCOMM=y +CONFIG_PPC_BESTCOMM_ATA=y +CONFIG_PPC_BESTCOMM_FEC=y +CONFIG_PPC_BESTCOMM_GEN_BD=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +CONFIG_PATA_MPC52xx=y +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_FEC_MPC52xx=y +CONFIG_FEC_MPC52xx_MDIO=y +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MPC52xx=y +CONFIG_SERIAL_MPC52xx_CONSOLE=y +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig new file mode 100644 index 0000000..8c7ba7c --- /dev/null +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -0,0 +1,1107 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25 +# Tue Apr 29 07:12:22 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set +CONFIG_PPC_MPC52xx=y +CONFIG_PPC_MPC5200_SIMPLE=y +# CONFIG_PPC_EFIKA is not set +# CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MPC5200_BUGFIX is not set +# CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_PPC_BESTCOMM=y +# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_FEC=y +# CONFIG_PPC_BESTCOMM_GEN_BD is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +CONFIG_PATA_MPC52xx=y +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FEC_MPC52xx=y +CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MPC52xx=y +CONFIG_SERIAL_MPC52xx_CONSOLE=y +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_MPC5200_WDT is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 2c2c2bf..9c0caa4 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25 -# Fri Apr 25 14:46:54 2008 +# Tue Apr 29 07:13:19 2008 # # CONFIG_PPC64 is not set @@ -162,6 +162,7 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set +# CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -220,6 +221,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -248,6 +250,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -257,9 +260,10 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 # @@ -360,6 +364,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -601,6 +606,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -661,7 +667,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -714,12 +719,7 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -779,6 +779,8 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers @@ -823,6 +825,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1001,7 +1004,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1068,6 +1070,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1088,6 +1091,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1095,6 +1099,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1107,3 +1112,4 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig new file mode 100644 index 0000000..7672bfb --- /dev/null +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -0,0 +1,1214 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25 +# Tue Apr 29 07:12:39 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set +CONFIG_PPC_MPC52xx=y +CONFIG_PPC_MPC5200_SIMPLE=y +# CONFIG_PPC_EFIKA is not set +# CONFIG_PPC_LITE5200 is not set +CONFIG_PPC_MPC5200_BUGFIX=y +# CONFIG_PPC_MPC5200_GPIO is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_PPC_BESTCOMM=y +# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_FEC=y +# CONFIG_PPC_BESTCOMM_GEN_BD is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +CONFIG_PATA_MPC52xx=y +CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_OF_PLATFORM is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FEC_MPC52xx=y +CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MPC52xx=y +CONFIG_SERIAL_MPC52xx_CONSOLE=y +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_MPC5200_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_SOC=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 5158e9b5218bd3799c9fa8c401ad24d7f0c0a0a1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 29 Apr 2008 17:08:38 +1000 Subject: [POWERPC] spufs: add context switch notification log There are userspace instrumentation tools that need to monitor spu context switches. This patch adds a new file called 'switch_log' to each spufs context directory that can be used to monitor the context switches. Context switch in/out and exit from spu_run are monitored after the file was first opened and can be read from it. Signed-off-by: Christoph Hellwig Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 0ad83ae..91f2d4d 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -88,6 +88,7 @@ void destroy_spu_context(struct kref *kref) kref_put(ctx->prof_priv_kref, ctx->prof_priv_release); BUG_ON(!list_empty(&ctx->rq)); atomic_dec(&nr_spu_contexts); + kfree(ctx->switch_log); kfree(ctx); } diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index ba791e9..b5c1505 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -2387,6 +2387,171 @@ static const struct file_operations spufs_stat_fops = { .release = single_release, }; +static inline int spufs_switch_log_used(struct spu_context *ctx) +{ + return (ctx->switch_log->head - ctx->switch_log->tail) % + SWITCH_LOG_BUFSIZE; +} + +static inline int spufs_switch_log_avail(struct spu_context *ctx) +{ + return SWITCH_LOG_BUFSIZE - spufs_switch_log_used(ctx); +} + +static int spufs_switch_log_open(struct inode *inode, struct file *file) +{ + struct spu_context *ctx = SPUFS_I(inode)->i_ctx; + + /* + * We (ab-)use the mapping_lock here because it serves the similar + * purpose for synchronizing open/close elsewhere. Maybe it should + * be renamed eventually. + */ + mutex_lock(&ctx->mapping_lock); + if (ctx->switch_log) { + spin_lock(&ctx->switch_log->lock); + ctx->switch_log->head = 0; + ctx->switch_log->tail = 0; + spin_unlock(&ctx->switch_log->lock); + } else { + /* + * We allocate the switch log data structures on first open. + * They will never be free because we assume a context will + * be traced until it goes away. + */ + ctx->switch_log = kzalloc(sizeof(struct switch_log) + + SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry), + GFP_KERNEL); + if (!ctx->switch_log) + goto out; + spin_lock_init(&ctx->switch_log->lock); + init_waitqueue_head(&ctx->switch_log->wait); + } + mutex_unlock(&ctx->mapping_lock); + + return 0; + out: + mutex_unlock(&ctx->mapping_lock); + return -ENOMEM; +} + +static int switch_log_sprint(struct spu_context *ctx, char *tbuf, int n) +{ + struct switch_log_entry *p; + + p = ctx->switch_log->log + ctx->switch_log->tail % SWITCH_LOG_BUFSIZE; + + return snprintf(tbuf, n, "%u.%09u %d %u %u %llu\n", + (unsigned int) p->tstamp.tv_sec, + (unsigned int) p->tstamp.tv_nsec, + p->spu_id, + (unsigned int) p->type, + (unsigned int) p->val, + (unsigned long long) p->timebase); +} + +static ssize_t spufs_switch_log_read(struct file *file, char __user *buf, + size_t len, loff_t *ppos) +{ + struct inode *inode = file->f_path.dentry->d_inode; + struct spu_context *ctx = SPUFS_I(inode)->i_ctx; + int error = 0, cnt = 0; + + if (!buf || len < 0) + return -EINVAL; + + while (cnt < len) { + char tbuf[128]; + int width; + + if (file->f_flags & O_NONBLOCK) { + if (spufs_switch_log_used(ctx) <= 0) + return cnt ? cnt : -EAGAIN; + } else { + /* Wait for data in buffer */ + error = wait_event_interruptible(ctx->switch_log->wait, + spufs_switch_log_used(ctx) > 0); + if (error) + break; + } + + spin_lock(&ctx->switch_log->lock); + if (ctx->switch_log->head == ctx->switch_log->tail) { + /* multiple readers race? */ + spin_unlock(&ctx->switch_log->lock); + continue; + } + + width = switch_log_sprint(ctx, tbuf, sizeof(tbuf)); + if (width < len) { + ctx->switch_log->tail = + (ctx->switch_log->tail + 1) % + SWITCH_LOG_BUFSIZE; + } + + spin_unlock(&ctx->switch_log->lock); + + /* + * If the record is greater than space available return + * partial buffer (so far) + */ + if (width >= len) + break; + + error = copy_to_user(buf + cnt, tbuf, width); + if (error) + break; + cnt += width; + } + + return cnt == 0 ? error : cnt; +} + +static unsigned int spufs_switch_log_poll(struct file *file, poll_table *wait) +{ + struct inode *inode = file->f_path.dentry->d_inode; + struct spu_context *ctx = SPUFS_I(inode)->i_ctx; + unsigned int mask = 0; + + poll_wait(file, &ctx->switch_log->wait, wait); + + if (spufs_switch_log_used(ctx) > 0) + mask |= POLLIN; + + return mask; +} + +static const struct file_operations spufs_switch_log_fops = { + .owner = THIS_MODULE, + .open = spufs_switch_log_open, + .read = spufs_switch_log_read, + .poll = spufs_switch_log_poll, +}; + +void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx, + u32 type, u32 val) +{ + if (!ctx->switch_log) + return; + + spin_lock(&ctx->switch_log->lock); + if (spufs_switch_log_avail(ctx) > 1) { + struct switch_log_entry *p; + + p = ctx->switch_log->log + ctx->switch_log->head; + ktime_get_ts(&p->tstamp); + p->timebase = get_tb(); + p->spu_id = spu ? spu->number : -1; + p->type = type; + p->val = val; + + ctx->switch_log->head = + (ctx->switch_log->head + 1) % SWITCH_LOG_BUFSIZE; + } + spin_unlock(&ctx->switch_log->lock); + + wake_up(&ctx->switch_log->wait); +} struct tree_descr spufs_dir_contents[] = { { "capabilities", &spufs_caps_fops, 0444, }, @@ -2423,6 +2588,7 @@ struct tree_descr spufs_dir_contents[] = { { "proxydma_info", &spufs_proxydma_info_fops, 0444, }, { "tid", &spufs_tid_fops, 0444, }, { "stat", &spufs_stat_fops, 0444, }, + { "switch_log", &spufs_switch_log_fops, 0444 }, {}, }; diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 96bf7c2..a9c35b7 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -405,6 +405,8 @@ long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event) ret = spu_run_fini(ctx, npc, &status); spu_yield(ctx); + spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, status); + if ((status & SPU_STATUS_STOPPED_BY_STOP) && (((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100)) ctx->stats.libassist++; diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 00528ef..31e9d85 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -240,6 +240,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) spu->mfc_callback = spufs_mfc_callback; mb(); spu_unmap_mappings(ctx); + spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0); spu_restore(&ctx->csa, spu); spu->timestamp = jiffies; spu_cpu_affinity_set(spu, raw_smp_processor_id()); @@ -419,6 +420,7 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); + spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0); spu->timestamp = jiffies; ctx->state = SPU_STATE_SAVED; spu->ibox_callback = NULL; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index cdc5151..dd63b16 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -47,6 +47,30 @@ enum { SPU_SCHED_SPU_RUN, /* context is within spu_run */ }; +enum { + SWITCH_LOG_BUFSIZE = 4096, +}; + +enum { + SWITCH_LOG_START, + SWITCH_LOG_STOP, + SWITCH_LOG_EXIT, +}; + +struct switch_log { + spinlock_t lock; + wait_queue_head_t wait; + unsigned long head; + unsigned long tail; + struct switch_log_entry { + struct timespec tstamp; + s32 spu_id; + u32 type; + u32 val; + u64 timebase; + } log[]; +}; + struct spu_context { struct spu *spu; /* pointer to a physical SPU */ struct spu_state csa; /* SPU context save area. */ @@ -116,6 +140,9 @@ struct spu_context { unsigned long long libassist; } stats; + /* context switch log */ + struct switch_log *switch_log; + struct list_head aff_list; int aff_head; int aff_offset; @@ -256,6 +283,8 @@ int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); void spu_switch_notify(struct spu *spu, struct spu_context *ctx); +void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx, + u32 type, u32 val); void spu_set_timeslice(struct spu_context *ctx); void spu_update_sched_info(struct spu_context *ctx); void __spu_update_sched_info(struct spu_context *ctx); -- cgit v0.10.2 From d6508aaf27ccef0d7e986aaa220ad4d098bca260 Mon Sep 17 00:00:00 2001 From: "Julio M. Merino Vidal" Date: Wed, 30 Apr 2008 15:06:39 +1000 Subject: [POWERPC] spufs: add sputrace marker parameter names The markers facility defines the marker parameters to be of the form 'name %format'. Add parameter names to sputrace, to specify the context and %spu paramerters, instead of just specifying the '%format' part. Signed-off-by: Julio M. Merino Vidal Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index dd63b16..7312745 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -359,8 +359,8 @@ extern void spuctx_switch_state(struct spu_context *ctx, enum spu_utilization_state new_state); #define spu_context_trace(name, ctx, spu) \ - trace_mark(name, "%p %p", ctx, spu); + trace_mark(name, "ctx %p spu %p", ctx, spu); #define spu_context_nospu_trace(name, ctx) \ - trace_mark(name, "%p", ctx); + trace_mark(name, "ctx %p", ctx); #endif diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 79aa773..b9c79ed 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -171,24 +171,24 @@ static void spu_context_nospu_event(void *probe_private, void *call_data, } struct spu_probe spu_probes[] = { - { "spu_bind_context__enter", "%p %p", spu_context_event }, - { "spu_unbind_context__enter", "%p %p", spu_context_event }, - { "spu_get_idle__enter", "%p", spu_context_nospu_event }, - { "spu_get_idle__found", "%p %p", spu_context_event }, - { "spu_get_idle__not_found", "%p", spu_context_nospu_event }, - { "spu_find_victim__enter", "%p", spu_context_nospu_event }, - { "spusched_tick__preempt", "%p %p", spu_context_event }, - { "spusched_tick__newslice", "%p", spu_context_nospu_event }, - { "spu_yield__enter", "%p", spu_context_nospu_event }, - { "spu_deactivate__enter", "%p", spu_context_nospu_event }, - { "__spu_deactivate__unload", "%p %p", spu_context_event }, - { "spufs_ps_nopfn__enter", "%p", spu_context_nospu_event }, - { "spufs_ps_nopfn__sleep", "%p", spu_context_nospu_event }, - { "spufs_ps_nopfn__wake", "%p %p", spu_context_event }, - { "spufs_ps_nopfn__insert", "%p %p", spu_context_event }, - { "spu_acquire_saved__enter", "%p", spu_context_nospu_event }, - { "destroy_spu_context__enter", "%p", spu_context_nospu_event }, - { "spufs_stop_callback__enter", "%p %p", spu_context_event }, + { "spu_bind_context__enter", "ctx %p spu %p", spu_context_event }, + { "spu_unbind_context__enter", "ctx %p spu %p", spu_context_event }, + { "spu_get_idle__enter", "ctx %p", spu_context_nospu_event }, + { "spu_get_idle__found", "ctx %p spu %p", spu_context_event }, + { "spu_get_idle__not_found", "ctx %p", spu_context_nospu_event }, + { "spu_find_victim__enter", "ctx %p", spu_context_nospu_event }, + { "spusched_tick__preempt", "ctx %p spu %p", spu_context_event }, + { "spusched_tick__newslice", "ctx %p", spu_context_nospu_event }, + { "spu_yield__enter", "ctx %p", spu_context_nospu_event }, + { "spu_deactivate__enter", "ctx %p", spu_context_nospu_event }, + { "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event }, + { "spufs_ps_nopfn__enter", "ctx %p", spu_context_nospu_event }, + { "spufs_ps_nopfn__sleep", "ctx %p", spu_context_nospu_event }, + { "spufs_ps_nopfn__wake", "ctx %p spu %p", spu_context_event }, + { "spufs_ps_nopfn__insert", "ctx %p spu %p", spu_context_event }, + { "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event }, + { "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event }, + { "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event }, }; static int __init sputrace_init(void) -- cgit v0.10.2 From 534578816f028b0dc675fdcc3314016d98588327 Mon Sep 17 00:00:00 2001 From: "Julio M. Merino Vidal" Date: Wed, 30 Apr 2008 15:12:30 +1000 Subject: [POWERPC] spufs: add marker for destroy_spu_context The sputrace module contained a reference to a marker for destroy_spu_context, but this marker did not appear in the code. Fix this by adding a marker in the function. Signed-off-by: Julio M. Merino Vidal Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 91f2d4d..5c50100 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -78,6 +78,7 @@ void destroy_spu_context(struct kref *kref) { struct spu_context *ctx; ctx = container_of(kref, struct spu_context, kref); + spu_context_nospu_trace(destroy_spu_context__enter, ctx); mutex_lock(&ctx->state_mutex); spu_deactivate(ctx); mutex_unlock(&ctx->state_mutex); -- cgit v0.10.2 From 8a476d49555cb7e8d4222782f695048b46692731 Mon Sep 17 00:00:00 2001 From: "Julio M. Merino Vidal" Date: Wed, 30 Apr 2008 15:16:14 +1000 Subject: [POWERPC] spufs: fix marker name for find_victim Fix a typo in the marker for the find_victim function, which prevented it from being traced. It previously read find_vitim. Signed-off-by: Julio M. Merino Vidal Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 31e9d85..62280c2 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -593,7 +593,7 @@ static struct spu *find_victim(struct spu_context *ctx) struct spu *spu; int node, n; - spu_context_nospu_trace(spu_find_vitim__enter, ctx); + spu_context_nospu_trace(spu_find_victim__enter, ctx); /* * Look for a possible preemption candidate on the local node first. -- cgit v0.10.2 From 3734dfc68b64d8ca202c799280daf28c2424659d Mon Sep 17 00:00:00 2001 From: "Julio M. Merino Vidal" Date: Wed, 30 Apr 2008 15:21:17 +1000 Subject: [POWERPC] spufs: trace spu_acquire_saved events The sputrace module contained a trace entry for spu_acquire_saved, but this marker was not placed anywhere. Fix this by adding a marker to the routine. Signed-off-by: Julio M. Merino Vidal Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 5c50100..177735f 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -152,6 +152,8 @@ int spu_acquire_saved(struct spu_context *ctx) { int ret; + spu_context_nospu_trace(spu_acquire_saved__enter, ctx); + ret = spu_acquire(ctx); if (ret) return ret; -- cgit v0.10.2 From d0eb801c60c20c2fbfc70e677415122798c472d2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 25 Apr 2008 11:03:03 +1000 Subject: [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h Signed-off-by: Kumar Gala Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/.gitignore b/arch/powerpc/platforms/cell/spufs/.gitignore new file mode 100644 index 0000000..a09ee8d --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/.gitignore @@ -0,0 +1,2 @@ +spu_save_dump.h +spu_restore_dump.h -- cgit v0.10.2 From 3243d87441bf7f97c5c9f7dd46b35f5783ec6740 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 30 Apr 2008 13:21:45 +1000 Subject: [POWERPC] Make emergency stack safe for current_thread_info() use The current_thread_info() macro, used by preempt_count(), assumes the base address and size of the stack are THREAD_SIZE aligned. The emergency stack currently isn't either of these things, which could potentially cause problems anytime we're running on the emergency stack. That includes when we detect a bad kernel stack pointer, and also during early_setup_secondary(). Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index dff6308..25e3fd8 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -487,9 +487,12 @@ static void __init emergency_stack_init(void) */ limit = min(0x10000000UL, lmb.rmo_size); - for_each_possible_cpu(i) - paca[i].emergency_sp = - __va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE; + for_each_possible_cpu(i) { + unsigned long sp; + sp = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit); + sp += THREAD_SIZE; + paca[i].emergency_sp = __va(sp); + } } /* -- cgit v0.10.2 From eabd90944b3a00766e84da3d117ea0f3e0a3b1a3 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 30 Apr 2008 14:47:12 +1000 Subject: [POWERPC] Fix crashkernel= handling when no crashkernel= specified Commit edd8ce67436851a62f99f1d9707b40ea6a8e5323 (Use extended crashkernel command line on ppc64), changed the logic in reserve_crashkernel() which deals with the crashkernel= command line option. This introduced a bug in the case when there is no crashkernel= option, or it is incorrect. We would fall through and calculate the crash_size based on the existing values in crashk_res. If both start and end are 0, the default, we calculate the crash_size as 1 byte - which is wrong. Rework the logic so that we use crashk_res, regardless of whether it's set by the command line or via the device tree (see prom.c). Then check if we have an empty range (end == start), and if so make sure to set both end and start to zero (this is checked in machine_kexec_64.c). Then we calculate the crash_size once we know we have a non-zero range. Finally we always want to warn the user if they specify a base != 32MB, so remove the special case for that in the command line parsing case. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 2d202f2..29a0e03 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -74,20 +74,20 @@ void __init reserve_crashkernel(void) ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(), &crash_size, &crash_base); if (ret == 0 && crash_size > 0) { - if (crash_base == 0) - crash_base = KDUMP_KERNELBASE; crashk_res.start = crash_base; - } else { - /* handle the device tree */ - crash_size = crashk_res.end - crashk_res.start + 1; + crashk_res.end = crash_base + crash_size - 1; } - if (crash_size == 0) + if (crashk_res.end == crashk_res.start) { + crashk_res.start = crashk_res.end = 0; return; + } /* We might have got these values via the command line or the * device tree, either way sanitise them now. */ + crash_size = crashk_res.end - crashk_res.start + 1; + if (crashk_res.start != KDUMP_KERNELBASE) printk("Crash kernel location must be 0x%x\n", KDUMP_KERNELBASE); -- cgit v0.10.2