From a8a572a6b5f2a79280d6e302cb3c1cb1fbaeb3e8 Mon Sep 17 00:00:00 2001 From: Dan Streetman Date: Thu, 29 Oct 2015 09:51:16 -0400 Subject: xfrm: dst_entries_init() per-net dst_ops Remove the dst_entries_init/destroy calls for xfrm4 and xfrm6 dst_ops templates; their dst_entries counters will never be used. Move the xfrm dst_ops initialization from the common xfrm/xfrm_policy.c to xfrm4/xfrm4_policy.c and xfrm6/xfrm6_policy.c, and call dst_entries_init and dst_entries_destroy for each net namespace. The ipv4 and ipv6 xfrms each create dst_ops template, and perform dst_entries_init on the templates. The template values are copied to each net namespace's xfrm.xfrm*_dst_ops. The problem there is the dst_ops pcpuc_entries field is a percpu counter and cannot be used correctly by simply copying it to another object. The result of this is a very subtle bug; changes to the dst entries counter from one net namespace may sometimes get applied to a different net namespace dst entries counter. This is because of how the percpu counter works; it has a main count field as well as a pointer to the percpu variables. Each net namespace maintains its own main count variable, but all point to one set of percpu variables. When any net namespace happens to change one of the percpu variables to outside its small batch range, its count is moved to the net namespace's main count variable. So with multiple net namespaces operating concurrently, the dst_ops entries counter can stray from the actual value that it should be; if counts are consistently moved from one net namespace to another (which my testing showed is likely), then one net namespace winds up with a negative dst_ops count while another winds up with a continually increasing count, eventually reaching its gc_thresh limit, which causes all new traffic on the net namespace to fail with -ENOBUFS. Signed-off-by: Dan Streetman Signed-off-by: Dan Streetman Signed-off-by: Steffen Klassert diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c index c10a9ee..126ff90 100644 --- a/net/ipv4/xfrm4_policy.c +++ b/net/ipv4/xfrm4_policy.c @@ -236,7 +236,7 @@ static void xfrm4_dst_ifdown(struct dst_entry *dst, struct net_device *dev, xfrm_dst_ifdown(dst, dev); } -static struct dst_ops xfrm4_dst_ops = { +static struct dst_ops xfrm4_dst_ops_template = { .family = AF_INET, .gc = xfrm4_garbage_collect, .update_pmtu = xfrm4_update_pmtu, @@ -250,7 +250,7 @@ static struct dst_ops xfrm4_dst_ops = { static struct xfrm_policy_afinfo xfrm4_policy_afinfo = { .family = AF_INET, - .dst_ops = &xfrm4_dst_ops, + .dst_ops = &xfrm4_dst_ops_template, .dst_lookup = xfrm4_dst_lookup, .get_saddr = xfrm4_get_saddr, .decode_session = _decode_session4, @@ -272,7 +272,7 @@ static struct ctl_table xfrm4_policy_table[] = { { } }; -static int __net_init xfrm4_net_init(struct net *net) +static int __net_init xfrm4_net_sysctl_init(struct net *net) { struct ctl_table *table; struct ctl_table_header *hdr; @@ -300,7 +300,7 @@ err_alloc: return -ENOMEM; } -static void __net_exit xfrm4_net_exit(struct net *net) +static void __net_exit xfrm4_net_sysctl_exit(struct net *net) { struct ctl_table *table; @@ -312,12 +312,44 @@ static void __net_exit xfrm4_net_exit(struct net *net) if (!net_eq(net, &init_net)) kfree(table); } +#else /* CONFIG_SYSCTL */ +static int inline xfrm4_net_sysctl_init(struct net *net) +{ + return 0; +} + +static void inline xfrm4_net_sysctl_exit(struct net *net) +{ +} +#endif + +static int __net_init xfrm4_net_init(struct net *net) +{ + int ret; + + memcpy(&net->xfrm.xfrm4_dst_ops, &xfrm4_dst_ops_template, + sizeof(xfrm4_dst_ops_template)); + ret = dst_entries_init(&net->xfrm.xfrm4_dst_ops); + if (ret) + return ret; + + ret = xfrm4_net_sysctl_init(net); + if (ret) + dst_entries_destroy(&net->xfrm.xfrm4_dst_ops); + + return ret; +} + +static void __net_exit xfrm4_net_exit(struct net *net) +{ + xfrm4_net_sysctl_exit(net); + dst_entries_destroy(&net->xfrm.xfrm4_dst_ops); +} static struct pernet_operations __net_initdata xfrm4_net_ops = { .init = xfrm4_net_init, .exit = xfrm4_net_exit, }; -#endif static void __init xfrm4_policy_init(void) { @@ -326,13 +358,9 @@ static void __init xfrm4_policy_init(void) void __init xfrm4_init(void) { - dst_entries_init(&xfrm4_dst_ops); - xfrm4_state_init(); xfrm4_policy_init(); xfrm4_protocol_init(); -#ifdef CONFIG_SYSCTL register_pernet_subsys(&xfrm4_net_ops); -#endif } diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index da55e0c..d51a18d 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -281,7 +281,7 @@ static void xfrm6_dst_ifdown(struct dst_entry *dst, struct net_device *dev, xfrm_dst_ifdown(dst, dev); } -static struct dst_ops xfrm6_dst_ops = { +static struct dst_ops xfrm6_dst_ops_template = { .family = AF_INET6, .gc = xfrm6_garbage_collect, .update_pmtu = xfrm6_update_pmtu, @@ -295,7 +295,7 @@ static struct dst_ops xfrm6_dst_ops = { static struct xfrm_policy_afinfo xfrm6_policy_afinfo = { .family = AF_INET6, - .dst_ops = &xfrm6_dst_ops, + .dst_ops = &xfrm6_dst_ops_template, .dst_lookup = xfrm6_dst_lookup, .get_saddr = xfrm6_get_saddr, .decode_session = _decode_session6, @@ -327,7 +327,7 @@ static struct ctl_table xfrm6_policy_table[] = { { } }; -static int __net_init xfrm6_net_init(struct net *net) +static int __net_init xfrm6_net_sysctl_init(struct net *net) { struct ctl_table *table; struct ctl_table_header *hdr; @@ -355,7 +355,7 @@ err_alloc: return -ENOMEM; } -static void __net_exit xfrm6_net_exit(struct net *net) +static void __net_exit xfrm6_net_sysctl_exit(struct net *net) { struct ctl_table *table; @@ -367,24 +367,52 @@ static void __net_exit xfrm6_net_exit(struct net *net) if (!net_eq(net, &init_net)) kfree(table); } +#else /* CONFIG_SYSCTL */ +static int inline xfrm6_net_sysctl_init(struct net *net) +{ + return 0; +} + +static void inline xfrm6_net_sysctl_exit(struct net *net) +{ +} +#endif + +static int __net_init xfrm6_net_init(struct net *net) +{ + int ret; + + memcpy(&net->xfrm.xfrm6_dst_ops, &xfrm6_dst_ops_template, + sizeof(xfrm6_dst_ops_template)); + ret = dst_entries_init(&net->xfrm.xfrm6_dst_ops); + if (ret) + return ret; + + ret = xfrm6_net_sysctl_init(net); + if (ret) + dst_entries_destroy(&net->xfrm.xfrm6_dst_ops); + + return ret; +} + +static void __net_exit xfrm6_net_exit(struct net *net) +{ + xfrm6_net_sysctl_exit(net); + dst_entries_destroy(&net->xfrm.xfrm6_dst_ops); +} static struct pernet_operations xfrm6_net_ops = { .init = xfrm6_net_init, .exit = xfrm6_net_exit, }; -#endif int __init xfrm6_init(void) { int ret; - dst_entries_init(&xfrm6_dst_ops); - ret = xfrm6_policy_init(); - if (ret) { - dst_entries_destroy(&xfrm6_dst_ops); + if (ret) goto out; - } ret = xfrm6_state_init(); if (ret) goto out_policy; @@ -393,9 +421,7 @@ int __init xfrm6_init(void) if (ret) goto out_state; -#ifdef CONFIG_SYSCTL register_pernet_subsys(&xfrm6_net_ops); -#endif out: return ret; out_state: @@ -407,11 +433,8 @@ out_policy: void xfrm6_fini(void) { -#ifdef CONFIG_SYSCTL unregister_pernet_subsys(&xfrm6_net_ops); -#endif xfrm6_protocol_fini(); xfrm6_policy_fini(); xfrm6_state_fini(); - dst_entries_destroy(&xfrm6_dst_ops); } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 94af3d0..bacd30b 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2807,7 +2807,6 @@ static struct neighbour *xfrm_neigh_lookup(const struct dst_entry *dst, int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) { - struct net *net; int err = 0; if (unlikely(afinfo == NULL)) return -EINVAL; @@ -2838,26 +2837,6 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) } spin_unlock(&xfrm_policy_afinfo_lock); - rtnl_lock(); - for_each_net(net) { - struct dst_ops *xfrm_dst_ops; - - switch (afinfo->family) { - case AF_INET: - xfrm_dst_ops = &net->xfrm.xfrm4_dst_ops; - break; -#if IS_ENABLED(CONFIG_IPV6) - case AF_INET6: - xfrm_dst_ops = &net->xfrm.xfrm6_dst_ops; - break; -#endif - default: - BUG(); - } - *xfrm_dst_ops = *afinfo->dst_ops; - } - rtnl_unlock(); - return err; } EXPORT_SYMBOL(xfrm_policy_register_afinfo); @@ -2893,22 +2872,6 @@ int xfrm_policy_unregister_afinfo(struct xfrm_policy_afinfo *afinfo) } EXPORT_SYMBOL(xfrm_policy_unregister_afinfo); -static void __net_init xfrm_dst_ops_init(struct net *net) -{ - struct xfrm_policy_afinfo *afinfo; - - rcu_read_lock(); - afinfo = rcu_dereference(xfrm_policy_afinfo[AF_INET]); - if (afinfo) - net->xfrm.xfrm4_dst_ops = *afinfo->dst_ops; -#if IS_ENABLED(CONFIG_IPV6) - afinfo = rcu_dereference(xfrm_policy_afinfo[AF_INET6]); - if (afinfo) - net->xfrm.xfrm6_dst_ops = *afinfo->dst_ops; -#endif - rcu_read_unlock(); -} - static int xfrm_dev_event(struct notifier_block *this, unsigned long event, void *ptr) { struct net_device *dev = netdev_notifier_info_to_dev(ptr); @@ -3057,7 +3020,6 @@ static int __net_init xfrm_net_init(struct net *net) rv = xfrm_policy_init(net); if (rv < 0) goto out_policy; - xfrm_dst_ops_init(net); rv = xfrm_sysctl_init(net); if (rv < 0) goto out_sysctl; -- cgit v0.10.2 From c65d2359a85da9a09768c75ea6b9ed6254a7df71 Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Sat, 24 Oct 2015 23:07:31 +0200 Subject: ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property The MSI Primo81 has a display in portrait mode but a touchscreen in landscape mode. To have both of them use the same coordinate system, the touchscreen-swapped-x-y property has to be set for the touchscreen. Signed-off-by: Karsten Merker Signed-off-by: Maxime Ripard diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 2d4250b..68b479b 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -83,6 +83,7 @@ reg = <0x5d>; interrupt-parent = <&pio>; interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + touchscreen-swapped-x-y; }; }; -- cgit v0.10.2 From 43675ffafd3c3373f82691f539df3dc7403877fe Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Nov 2015 01:02:44 +0300 Subject: bus: sunxi-rsb: unlock on error in sunxi_rsb_read() Don't forget to unlock before returning an error code. Fixes: d787dcdb9c8f ('bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus') Signed-off-by: Dan Carpenter Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index 846bc29..0cfcb39 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -342,13 +342,13 @@ static int sunxi_rsb_read(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr, ret = _sunxi_rsb_run_xfer(rsb); if (ret) - goto out; + goto unlock; *buf = readl(rsb->regs + RSB_DATA); +unlock: mutex_unlock(&rsb->lock); -out: return ret; } -- cgit v0.10.2 From 42beaccb2a66d7dc4a051a686122ed41c9a2ce1a Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 17 Nov 2015 09:33:14 -0800 Subject: Input: db9 - clear unused function pointers db9_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 2260c419b52b ("Input: db9 - use parallel port device model") Signed-off-by: Sudip Mukherjee Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c index 932d073..da32609 100644 --- a/drivers/input/joystick/db9.c +++ b/drivers/input/joystick/db9.c @@ -592,6 +592,7 @@ static void db9_attach(struct parport *pp) return; } + memset(&db9_parport_cb, 0, sizeof(db9_parport_cb)); db9_parport_cb.flags = PARPORT_FLAG_EXCL; pd = parport_register_dev_model(pp, "db9", &db9_parport_cb, port_idx); -- cgit v0.10.2 From eb12a5f51f4332bd75a9d35caa4d79e8300af3a7 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 17 Nov 2015 09:33:29 -0800 Subject: Input: gamecon - clear unused function pointers gc_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: a517e87c3dfc ("Input: gamecon - use parallel port device model") Signed-off-by: Sudip Mukherjee Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index 5a672dc..eae14d5 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -951,6 +951,7 @@ static void gc_attach(struct parport *pp) pads = gc_cfg[port_idx].args + 1; n_pads = gc_cfg[port_idx].nargs - 1; + memset(&gc_parport_cb, 0, sizeof(gc_parport_cb)); gc_parport_cb.flags = PARPORT_FLAG_EXCL; pd = parport_register_dev_model(pp, "gamecon", &gc_parport_cb, -- cgit v0.10.2 From 3855e9e4d30ed5207319fb5ef8b0fb416d873cbf Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 17 Nov 2015 09:33:41 -0800 Subject: Input: turbografx - clear unused function pointers tgfx_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 4de27a638a99 ("Input: turbografx - use parallel port device model") Signed-off-by: Sudip Mukherjee Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index 9f5bca2..77f575d 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -181,6 +181,7 @@ static void tgfx_attach(struct parport *pp) n_buttons = tgfx_cfg[port_idx].args + 1; n_devs = tgfx_cfg[port_idx].nargs - 1; + memset(&tgfx_parport_cb, 0, sizeof(tgfx_parport_cb)); tgfx_parport_cb.flags = PARPORT_FLAG_EXCL; pd = parport_register_dev_model(pp, "turbografx", &tgfx_parport_cb, -- cgit v0.10.2 From d1f2a031ab902020393dc1dc2d721ea95578b5a8 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 17 Nov 2015 09:33:48 -0800 Subject: Input: walkera0701 - clear unused function pointers walkera0701_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 221bcb24c653 ("Input: walkera0701 - use parallel port device model") Signed-off-by: Sudip Mukherjee Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c index d88f5dd..413e343 100644 --- a/drivers/input/joystick/walkera0701.c +++ b/drivers/input/joystick/walkera0701.c @@ -218,6 +218,7 @@ static void walkera0701_attach(struct parport *pp) w->parport = pp; + memset(&walkera0701_parport_cb, 0, sizeof(walkera0701_parport_cb)); walkera0701_parport_cb.flags = PARPORT_FLAG_EXCL; walkera0701_parport_cb.irq_func = walkera0701_irq_handler; walkera0701_parport_cb.private = w; -- cgit v0.10.2 From 0c6da0733bff3bc7aaa1dcd63fefdbbca5a7a5f8 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 17 Nov 2015 09:33:58 -0800 Subject: Input: parkbd - clear unused function pointers parkbd_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 33ca8ab97cbb ("Input: parkbd - use parallel port device model") Signed-off-by: Sudip Mukherjee Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/parkbd.c b/drivers/input/serio/parkbd.c index 92c31b8..1edfac7 100644 --- a/drivers/input/serio/parkbd.c +++ b/drivers/input/serio/parkbd.c @@ -145,6 +145,7 @@ static int parkbd_getport(struct parport *pp) { struct pardev_cb parkbd_parport_cb; + memset(&parkbd_parport_cb, 0, sizeof(parkbd_parport_cb)); parkbd_parport_cb.irq_func = parkbd_interrupt; parkbd_parport_cb.flags = PARPORT_FLAG_EXCL; -- cgit v0.10.2 From 2bc53b8046ce9a1543204b6c6da1ab95e4caac76 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Fri, 27 Nov 2015 08:33:27 +0100 Subject: s390/zcrypt: Fix AP queue handling if queue is full When the AP queue depth of requests was reached additional requests have been ignored. These request are stuck in the request queue. The AP queue handling now push the next waiting request into the queue after fetching a previous serviced and finished reply. Signed-off-by: Ingo Tuchscherer Acked-by: Martin Schwidefsky Acked-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 61f7685..24ec282 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -599,8 +599,10 @@ static enum ap_wait ap_sm_read(struct ap_device *ap_dev) status = ap_sm_recv(ap_dev); switch (status.response_code) { case AP_RESPONSE_NORMAL: - if (ap_dev->queue_count > 0) + if (ap_dev->queue_count > 0) { + ap_dev->state = AP_STATE_WORKING; return AP_WAIT_AGAIN; + } ap_dev->state = AP_STATE_IDLE; return AP_WAIT_NONE; case AP_RESPONSE_NO_PENDING_REPLY: -- cgit v0.10.2 From 9abd29e7c13de24ce73213a425d9574b35ac0c6a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 25 Nov 2015 16:58:18 +0100 Subject: i2c: rk3x: populate correct variable for sda_falling_time Signed-off-by: Wolfram Sang Reviewed-by: Douglas Anderson Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index c1935eb..9096d17 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -908,7 +908,7 @@ static int rk3x_i2c_probe(struct platform_device *pdev) &i2c->scl_fall_ns)) i2c->scl_fall_ns = 300; if (of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns", - &i2c->scl_fall_ns)) + &i2c->sda_fall_ns)) i2c->sda_fall_ns = i2c->scl_fall_ns; strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name)); -- cgit v0.10.2 From bba61f50f76574ca5b84b310925be7c2e8e64275 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 27 Sep 2015 16:57:08 +0200 Subject: i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the datasheets the n factor for dividing the tclk is 2 to the power n on Allwinner SoCs, not 2 to the power n + 1 as it is on other mv64xxx implementations. I've contacted Allwinner about this and they have confirmed that the datasheet is correct. This commit fixes the clk-divider calculations for Allwinner SoCs accordingly. Signed-off-by: Hans de Goede Acked-by: Maxime Ripard Tested-by: Olliver Schinagl Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 5801227..43207f5 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -146,6 +146,8 @@ struct mv64xxx_i2c_data { bool errata_delay; struct reset_control *rstc; bool irq_clear_inverted; + /* Clk div is 2 to the power n, not 2 to the power n + 1 */ + bool clk_n_base_0; }; static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = { @@ -757,25 +759,29 @@ MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); #ifdef CONFIG_OF #ifdef CONFIG_HAVE_CLK static int -mv64xxx_calc_freq(const int tclk, const int n, const int m) +mv64xxx_calc_freq(struct mv64xxx_i2c_data *drv_data, + const int tclk, const int n, const int m) { - return tclk / (10 * (m + 1) * (2 << n)); + if (drv_data->clk_n_base_0) + return tclk / (10 * (m + 1) * (1 << n)); + else + return tclk / (10 * (m + 1) * (2 << n)); } static bool -mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n, - u32 *best_m) +mv64xxx_find_baud_factors(struct mv64xxx_i2c_data *drv_data, + const u32 req_freq, const u32 tclk) { int freq, delta, best_delta = INT_MAX; int m, n; for (n = 0; n <= 7; n++) for (m = 0; m <= 15; m++) { - freq = mv64xxx_calc_freq(tclk, n, m); + freq = mv64xxx_calc_freq(drv_data, tclk, n, m); delta = req_freq - freq; if (delta >= 0 && delta < best_delta) { - *best_m = m; - *best_n = n; + drv_data->freq_m = m; + drv_data->freq_n = n; best_delta = delta; } if (best_delta == 0) @@ -813,8 +819,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, if (of_property_read_u32(np, "clock-frequency", &bus_freq)) bus_freq = 100000; /* 100kHz by default */ - if (!mv64xxx_find_baud_factors(bus_freq, tclk, - &drv_data->freq_n, &drv_data->freq_m)) { + if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") || + of_device_is_compatible(np, "allwinner,sun6i-a31-i2c")) + drv_data->clk_n_base_0 = true; + + if (!mv64xxx_find_baud_factors(drv_data, bus_freq, tclk)) { rc = -EINVAL; goto out; } -- cgit v0.10.2 From 87cb5b425fa32094972868b50e65083c586509a3 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Mon, 30 Nov 2015 15:51:00 +0100 Subject: i2c: davinci: Increase module clock frequency I2C controller used in Keystone SoC has an undocumented peculiarity which results in SDA-SCL margins being dependent on module clock. Driving high capacity bus near its limits can result in STOP condition sometimes being understood as REPEATED-START by slaves (or NACK instead of ACK, etc...). Driving the module with higher clocks increases the margin between SDA and SCL transitions, making the operations with higher bus rates more robust. Therefore, target the module clock to 12MHz instead of 7MHz, still staying within the specification limits. Before the change STOP timing looked like this on 400kHz: SDA ----------+ +---- \ / \ / +----+ (1) SCL --+ +------------ \ / \ / +----+ (2) While only point (1) signals STOP, point (2) could be incorrectly recognized as repeated-START (almost no margin between SDA and SCL transitions). After the change there is at least 600ns margin measured between SCL fall and SDA fall during STOP generation: SDA ------+ +---- \ / \ / +----+ SCL --+ +-------- \ / \ / +----+ ->| |<- 600ns ->| |<- tSUSTO So called tSUSTO (setup time for STOP condition) is still slightly higher than 600ns, so no problem here. Signed-off-by: Alexander Sverdlin Acked-by: Santosh Shilimkar Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index c5628a4..a8bdcb5 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -202,8 +202,15 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) * d is always 6 on Keystone I2C controller */ - /* get minimum of 7 MHz clock, but max of 12 MHz */ - psc = (input_clock / 7000000) - 1; + /* + * Both Davinci and current Keystone User Guides recommend a value + * between 7MHz and 12MHz. In reality 7MHz module clock doesn't + * always produce enough margin between SDA and SCL transitions. + * Measurements show that the higher the module clock is, the + * bigger is the margin, providing more reliable communication. + * So we better target for 12MHz. + */ + psc = (input_clock / 12000000) - 1; if ((input_clock / (psc + 1)) > 12000000) psc++; /* better to run under spec than over */ d = (psc >= 2) ? 5 : 7 - psc; -- cgit v0.10.2 From a07f0ad7895303ec37155655229ca2a07080d135 Mon Sep 17 00:00:00 2001 From: "Dmitry V. Krivenok" Date: Mon, 30 Nov 2015 23:45:46 +0300 Subject: i2c: do not use 0x in front of %pa Signed-off-by: Dmitry V. Krivenok Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index ea72dca..25020ec 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -822,7 +822,7 @@ static int st_i2c_probe(struct platform_device *pdev) adap = &i2c_dev->adap; i2c_set_adapdata(adap, i2c_dev); - snprintf(adap->name, sizeof(adap->name), "ST I2C(0x%pa)", &res->start); + snprintf(adap->name, sizeof(adap->name), "ST I2C(%pa)", &res->start); adap->owner = THIS_MODULE; adap->timeout = 2 * HZ; adap->retries = 0; -- cgit v0.10.2 From 3de88d622fd68bd4dbee0f80168218b23f798fd0 Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Fri, 19 Jun 2015 16:15:57 +0100 Subject: xen/events/fifo: Consume unprocessed events when a CPU dies When a CPU is offlined, there may be unprocessed events on a port for that CPU. If the port is subsequently reused on a different CPU, it could be in an unexpected state with the link bit set, resulting in interrupts being missed. Fix this by consuming any unprocessed events for a particular CPU when that CPU dies. Signed-off-by: Ross Lagerwall Cc: # 3.14+ Signed-off-by: David Vrabel diff --git a/drivers/xen/events/events_fifo.c b/drivers/xen/events/events_fifo.c index e3e9e3d..96a1b8d 100644 --- a/drivers/xen/events/events_fifo.c +++ b/drivers/xen/events/events_fifo.c @@ -281,7 +281,8 @@ static void handle_irq_for_port(unsigned port) static void consume_one_event(unsigned cpu, struct evtchn_fifo_control_block *control_block, - unsigned priority, unsigned long *ready) + unsigned priority, unsigned long *ready, + bool drop) { struct evtchn_fifo_queue *q = &per_cpu(cpu_queue, cpu); uint32_t head; @@ -313,13 +314,17 @@ static void consume_one_event(unsigned cpu, if (head == 0) clear_bit(priority, ready); - if (evtchn_fifo_is_pending(port) && !evtchn_fifo_is_masked(port)) - handle_irq_for_port(port); + if (evtchn_fifo_is_pending(port) && !evtchn_fifo_is_masked(port)) { + if (unlikely(drop)) + pr_warn("Dropping pending event for port %u\n", port); + else + handle_irq_for_port(port); + } q->head[priority] = head; } -static void evtchn_fifo_handle_events(unsigned cpu) +static void __evtchn_fifo_handle_events(unsigned cpu, bool drop) { struct evtchn_fifo_control_block *control_block; unsigned long ready; @@ -331,11 +336,16 @@ static void evtchn_fifo_handle_events(unsigned cpu) while (ready) { q = find_first_bit(&ready, EVTCHN_FIFO_MAX_QUEUES); - consume_one_event(cpu, control_block, q, &ready); + consume_one_event(cpu, control_block, q, &ready, drop); ready |= xchg(&control_block->ready, 0); } } +static void evtchn_fifo_handle_events(unsigned cpu) +{ + __evtchn_fifo_handle_events(cpu, false); +} + static void evtchn_fifo_resume(void) { unsigned cpu; @@ -420,6 +430,9 @@ static int evtchn_fifo_cpu_notification(struct notifier_block *self, if (!per_cpu(cpu_control_block, cpu)) ret = evtchn_fifo_alloc_control_block(cpu); break; + case CPU_DEAD: + __evtchn_fifo_handle_events(cpu, true); + break; default: break; } -- cgit v0.10.2 From de0afc9bdeeadaa998797d2333c754bf9f4d5dcf Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 2 Dec 2015 12:10:48 -0500 Subject: xen: Resume PMU from non-atomic context Resuming PMU currently triggers a warning from ___might_sleep() (assuming CONFIG_DEBUG_ATOMIC_SLEEP is set) when xen_pmu_init() allocates GFP_KERNEL page because we are in state resembling atomic context. Move resuming PMU to xen_arch_resume() which is called in regular context. For symmetry move suspending PMU to xen_arch_suspend() as well. Signed-off-by: Boris Ostrovsky Reported-by: Konrad Rzeszutek Wilk Cc: # 4.3 Signed-off-by: David Vrabel diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index feddabd..3705eab 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -68,26 +68,16 @@ static void xen_pv_post_suspend(int suspend_cancelled) void xen_arch_pre_suspend(void) { - int cpu; - - for_each_online_cpu(cpu) - xen_pmu_finish(cpu); - if (xen_pv_domain()) xen_pv_pre_suspend(); } void xen_arch_post_suspend(int cancelled) { - int cpu; - if (xen_pv_domain()) xen_pv_post_suspend(cancelled); else xen_hvm_post_suspend(cancelled); - - for_each_online_cpu(cpu) - xen_pmu_init(cpu); } static void xen_vcpu_notify_restore(void *data) @@ -106,10 +96,20 @@ static void xen_vcpu_notify_suspend(void *data) void xen_arch_resume(void) { + int cpu; + on_each_cpu(xen_vcpu_notify_restore, NULL, 1); + + for_each_online_cpu(cpu) + xen_pmu_init(cpu); } void xen_arch_suspend(void) { + int cpu; + + for_each_online_cpu(cpu) + xen_pmu_finish(cpu); + on_each_cpu(xen_vcpu_notify_suspend, NULL, 1); } -- cgit v0.10.2 From c67566c6a1dc0dd0309a54e63656e57050cbb9fe Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 20 Nov 2015 10:58:07 -0800 Subject: Input: atmel_mxt_ts - add generic platform data for Chromebooks Apparently people are installing generic Linux distributions not only on Pixels but also on other Chromebooks. Unfortunately on all of them Atmel parts assigned names ATML0000 and ATML0001, and do not carry any other configuration data. So let's create generic instance of platform data that should cover most of them (we assume that they will not be using T100 objects, since with those Google mapped BTN_LEFT onto a different GPIO, so slightly different keymap would be needed, but I think we used parts with T100 on ARM devices where we thankfully have DTS and can describe the devices better). Tested-by: Rich K Reviewed-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index c562205..159120b 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -2487,6 +2487,31 @@ static struct mxt_acpi_platform_data samus_platform_data[] = { { } }; +static unsigned int chromebook_tp_buttons[] = { + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + BTN_LEFT +}; + +static struct mxt_acpi_platform_data chromebook_platform_data[] = { + { + /* Touchpad */ + .hid = "ATML0000", + .pdata = { + .t19_num_keys = ARRAY_SIZE(chromebook_tp_buttons), + .t19_keymap = chromebook_tp_buttons, + }, + }, + { + /* Touchscreen */ + .hid = "ATML0001", + }, + { } +}; + static const struct dmi_system_id mxt_dmi_table[] = { { /* 2015 Google Pixel */ @@ -2497,6 +2522,14 @@ static const struct dmi_system_id mxt_dmi_table[] = { }, .driver_data = samus_platform_data, }, + { + /* Other Google Chromebooks */ + .ident = "Chromebook", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), + }, + .driver_data = chromebook_platform_data, + }, { } }; -- cgit v0.10.2 From 8e20cf2bce122ce9262d6034ee5d5b76fbb92f96 Mon Sep 17 00:00:00 2001 From: Vladis Dronov Date: Tue, 1 Dec 2015 13:09:17 -0800 Subject: Input: aiptek - fix crash on detecting device without endpoints The aiptek driver crashes in aiptek_probe() when a specially crafted USB device without endpoints is detected. This fix adds a check that the device has proper configuration expected by the driver. Also an error return value is changed to more matching one in one of the error paths. Reported-by: Ralf Spenneberg Signed-off-by: Vladis Dronov Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index e7f966d..78ca448 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -1819,6 +1819,14 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0); + /* Verify that a device really has an endpoint */ + if (intf->altsetting[0].desc.bNumEndpoints < 1) { + dev_err(&intf->dev, + "interface has %d endpoints, but must have minimum 1\n", + intf->altsetting[0].desc.bNumEndpoints); + err = -EINVAL; + goto fail3; + } endpoint = &intf->altsetting[0].endpoint[0].desc; /* Go set up our URB, which is called when the tablet receives @@ -1861,6 +1869,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) if (i == ARRAY_SIZE(speeds)) { dev_info(&intf->dev, "Aiptek tried all speeds, no sane response\n"); + err = -EINVAL; goto fail3; } -- cgit v0.10.2 From 1cf44efa1e4f0adc6998ad3087fa5220b682743c Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 2 Dec 2015 16:13:54 -0800 Subject: Input: arizona-haptic - fix disabling of haptics device A small copy and paste error was preventing the haptics device being disabled. This patch corrects the value written on disable. Signed-off-by: Charles Keepax Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c index 4bf6785..d5994a7 100644 --- a/drivers/input/misc/arizona-haptics.c +++ b/drivers/input/misc/arizona-haptics.c @@ -97,8 +97,7 @@ static void arizona_haptics_work(struct work_struct *work) ret = regmap_update_bits(arizona->regmap, ARIZONA_HAPTICS_CONTROL_1, - ARIZONA_HAP_CTRL_MASK, - 1 << ARIZONA_HAP_CTRL_SHIFT); + ARIZONA_HAP_CTRL_MASK, 0); if (ret != 0) { dev_err(arizona->dev, "Failed to stop haptics: %d\n", ret); -- cgit v0.10.2 From 97dc5bf8d60938741e2f99242dff3684c29b6d90 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Nov 2015 12:29:31 +0100 Subject: phy: sun9i-usb: add USB dependency The sun9i usb phy driver calls of_usb_get_phy_mode(), which is not available if USB is disabled: drivers/built-in.o: In function `sun9i_usb_phy_probe': :(.text+0x7fb0): undefined reference to `of_usb_get_phy_mode' This adds a dependency to avoid the randconfig build errors. Signed-off-by: Arnd Bergmann Fixes: 9c3b44302636 ("phy: Add driver to support individual USB PHYs on sun9i") Acked-by: Chen-Yu Tsai Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 7eb5859d..03cb3ea 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -233,6 +233,7 @@ config PHY_SUN9I_USB tristate "Allwinner sun9i SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF depends on RESET_CONTROLLER + depends on USB_COMMON select GENERIC_PHY help Enable this to support the transceiver that is part of Allwinner -- cgit v0.10.2 From 0b25ff8697d8074cee22269226c210605f97ec1b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Nov 2015 12:33:14 +0100 Subject: phy: brcmstb-sata: add missing of_node_put for_each_available_child_of_node performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. A simplified version of the semantic patch that finds this problem is as follows (http://coccinelle.lip6.fr): // @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // Signed-off-by: Julia Lawall Acked-by: Brian Norris Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c index 8a2cb16..cd9dba8 100644 --- a/drivers/phy/phy-brcmstb-sata.c +++ b/drivers/phy/phy-brcmstb-sata.c @@ -140,7 +140,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev) struct brcm_sata_phy *priv; struct resource *res; struct phy_provider *provider; - int count = 0; + int ret, count = 0; if (of_get_child_count(dn) == 0) return -ENODEV; @@ -163,16 +163,19 @@ static int brcm_sata_phy_probe(struct platform_device *pdev) if (of_property_read_u32(child, "reg", &id)) { dev_err(dev, "missing reg property in node %s\n", child->name); - return -EINVAL; + ret = -EINVAL; + goto put_child; } if (id >= MAX_PORTS) { dev_err(dev, "invalid reg: %u\n", id); - return -EINVAL; + ret = -EINVAL; + goto put_child; } if (priv->phys[id].phy) { dev_err(dev, "already registered port %u\n", id); - return -EINVAL; + ret = -EINVAL; + goto put_child; } port = &priv->phys[id]; @@ -182,7 +185,8 @@ static int brcm_sata_phy_probe(struct platform_device *pdev) port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); if (IS_ERR(port->phy)) { dev_err(dev, "failed to create PHY\n"); - return PTR_ERR(port->phy); + ret = PTR_ERR(port->phy); + goto put_child; } phy_set_drvdata(port->phy, port); @@ -198,6 +202,9 @@ static int brcm_sata_phy_probe(struct platform_device *pdev) dev_info(dev, "registered %d port(s)\n", count); return 0; +put_child: + of_node_put(child); + return ret; } static struct platform_driver brcm_sata_phy_driver = { -- cgit v0.10.2 From 2bb80ccda17b8ab2e4956ab0743c657b30631a3f Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Nov 2015 12:33:15 +0100 Subject: phy: mt65xx-usb3: add missing of_node_put for_each_child_of_node performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. A simplified version of the semantic patch that finds this problem is as follows (http://coccinelle.lip6.fr): // @@ expression root,e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // Signed-off-by: Julia Lawall Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c index f30b28b..e427c3b 100644 --- a/drivers/phy/phy-mt65xx-usb3.c +++ b/drivers/phy/phy-mt65xx-usb3.c @@ -415,7 +415,7 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev) struct resource *sif_res; struct mt65xx_u3phy *u3phy; struct resource res; - int port; + int port, retval; u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL); if (!u3phy) @@ -447,31 +447,34 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev) for_each_child_of_node(np, child_np) { struct mt65xx_phy_instance *instance; struct phy *phy; - int retval; instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); - if (!instance) - return -ENOMEM; + if (!instance) { + retval = -ENOMEM; + goto put_child; + } u3phy->phys[port] = instance; phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops); if (IS_ERR(phy)) { dev_err(dev, "failed to create phy\n"); - return PTR_ERR(phy); + retval = PTR_ERR(phy); + goto put_child; } retval = of_address_to_resource(child_np, 0, &res); if (retval) { dev_err(dev, "failed to get address resource(id-%d)\n", port); - return retval; + goto put_child; } instance->port_base = devm_ioremap_resource(&phy->dev, &res); if (IS_ERR(instance->port_base)) { dev_err(dev, "failed to remap phy regs\n"); - return PTR_ERR(instance->port_base); + retval = PTR_ERR(instance->port_base); + goto put_child; } instance->phy = phy; @@ -483,6 +486,9 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev) provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate); return PTR_ERR_OR_ZERO(provider); +put_child: + of_node_put(child_np); + return retval; } static const struct of_device_id mt65xx_u3phy_id_table[] = { -- cgit v0.10.2 From d0ca576af2120e23f2433041bf0865798e02c547 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Nov 2015 12:33:16 +0100 Subject: phy: berlin-sata: add missing of_node_put for_each_available_child_of_node performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. A simplified version of the semantic patch that finds this problem is as follows (http://coccinelle.lip6.fr): // @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // Signed-off-by: Julia Lawall Acked-by: Sebastian Hesselbarth Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c index 77a2e05..f84a33a 100644 --- a/drivers/phy/phy-berlin-sata.c +++ b/drivers/phy/phy-berlin-sata.c @@ -195,7 +195,7 @@ static int phy_berlin_sata_probe(struct platform_device *pdev) struct phy_provider *phy_provider; struct phy_berlin_priv *priv; struct resource *res; - int i = 0; + int ret, i = 0; u32 phy_id; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); @@ -237,22 +237,27 @@ static int phy_berlin_sata_probe(struct platform_device *pdev) if (of_property_read_u32(child, "reg", &phy_id)) { dev_err(dev, "missing reg property in node %s\n", child->name); - return -EINVAL; + ret = -EINVAL; + goto put_child; } if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) { dev_err(dev, "invalid reg in node %s\n", child->name); - return -EINVAL; + ret = -EINVAL; + goto put_child; } phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL); - if (!phy_desc) - return -ENOMEM; + if (!phy_desc) { + ret = -ENOMEM; + goto put_child; + } phy = devm_phy_create(dev, NULL, &phy_berlin_sata_ops); if (IS_ERR(phy)) { dev_err(dev, "failed to create PHY %d\n", phy_id); - return PTR_ERR(phy); + ret = PTR_ERR(phy); + goto put_child; } phy_desc->phy = phy; @@ -269,6 +274,9 @@ static int phy_berlin_sata_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate); return PTR_ERR_OR_ZERO(phy_provider); +put_child: + of_node_put(child); + return ret; } static const struct of_device_id phy_berlin_sata_of_match[] = { -- cgit v0.10.2 From f6f31af81c77087c8884f5dc1ab91b029cd11842 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Nov 2015 12:33:17 +0100 Subject: phy: rockchip-usb: add missing of_node_put for_each_available_child_of_node performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. A simplified version of the semantic patch that finds this problem is as follows (http://coccinelle.lip6.fr): // @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // Signed-off-by: Julia Lawall Reviewed-by: Heiko Stuebner Tested-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index 91d6f34..62c43c4 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -108,13 +108,16 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev) for_each_available_child_of_node(dev->of_node, child) { rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); - if (!rk_phy) - return -ENOMEM; + if (!rk_phy) { + err = -ENOMEM; + goto put_child; + } if (of_property_read_u32(child, "reg", ®_offset)) { dev_err(dev, "missing reg property in node %s\n", child->name); - return -EINVAL; + err = -EINVAL; + goto put_child; } rk_phy->reg_offset = reg_offset; @@ -127,18 +130,22 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev) rk_phy->phy = devm_phy_create(dev, child, &ops); if (IS_ERR(rk_phy->phy)) { dev_err(dev, "failed to create PHY\n"); - return PTR_ERR(rk_phy->phy); + err = PTR_ERR(rk_phy->phy); + goto put_child; } phy_set_drvdata(rk_phy->phy, rk_phy); /* only power up usb phy when it use, so disable it when init*/ err = rockchip_usb_phy_power(rk_phy, 1); if (err) - return err; + goto put_child; } phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); return PTR_ERR_OR_ZERO(phy_provider); +put_child: + of_node_put(child); + return err; } static const struct of_device_id rockchip_usb_phy_dt_ids[] = { -- cgit v0.10.2 From 7fd7fa43f4f7b1ce9ef0070256530dab6726ef08 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Nov 2015 12:33:18 +0100 Subject: phy: miphy28lp: add missing of_node_put for_each_child_of_node performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. A simplified version of the semantic patch that finds this problem is as follows (http://coccinelle.lip6.fr): // @@ expression root,e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // Signed-off-by: Julia Lawall Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c index c47b56b..3acd2a1 100644 --- a/drivers/phy/phy-miphy28lp.c +++ b/drivers/phy/phy-miphy28lp.c @@ -1226,15 +1226,18 @@ static int miphy28lp_probe(struct platform_device *pdev) miphy_phy = devm_kzalloc(&pdev->dev, sizeof(*miphy_phy), GFP_KERNEL); - if (!miphy_phy) - return -ENOMEM; + if (!miphy_phy) { + ret = -ENOMEM; + goto put_child; + } miphy_dev->phys[port] = miphy_phy; phy = devm_phy_create(&pdev->dev, child, &miphy28lp_ops); if (IS_ERR(phy)) { dev_err(&pdev->dev, "failed to create PHY\n"); - return PTR_ERR(phy); + ret = PTR_ERR(phy); + goto put_child; } miphy_dev->phys[port]->phy = phy; @@ -1242,11 +1245,11 @@ static int miphy28lp_probe(struct platform_device *pdev) ret = miphy28lp_of_probe(child, miphy_phy); if (ret) - return ret; + goto put_child; ret = miphy28lp_probe_resets(child, miphy_dev->phys[port]); if (ret) - return ret; + goto put_child; phy_set_drvdata(phy, miphy_dev->phys[port]); port++; @@ -1255,6 +1258,9 @@ static int miphy28lp_probe(struct platform_device *pdev) provider = devm_of_phy_provider_register(&pdev->dev, miphy28lp_xlate); return PTR_ERR_OR_ZERO(provider); +put_child: + of_node_put(child); + return ret; } static const struct of_device_id miphy28lp_of_match[] = { -- cgit v0.10.2 From 39c2b9642294fb54088a57ea6357e4aaa36c223e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Nov 2015 12:33:19 +0100 Subject: phy: miphy365x: add missing of_node_put for_each_child_of_node performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. A simplified version of the semantic patch that finds this problem is as follows (http://coccinelle.lip6.fr): // @@ expression root,e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // Signed-off-by: Julia Lawall Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c index 00a686a..e661f3b 100644 --- a/drivers/phy/phy-miphy365x.c +++ b/drivers/phy/phy-miphy365x.c @@ -566,22 +566,25 @@ static int miphy365x_probe(struct platform_device *pdev) miphy_phy = devm_kzalloc(&pdev->dev, sizeof(*miphy_phy), GFP_KERNEL); - if (!miphy_phy) - return -ENOMEM; + if (!miphy_phy) { + ret = -ENOMEM; + goto put_child; + } miphy_dev->phys[port] = miphy_phy; phy = devm_phy_create(&pdev->dev, child, &miphy365x_ops); if (IS_ERR(phy)) { dev_err(&pdev->dev, "failed to create PHY\n"); - return PTR_ERR(phy); + ret = PTR_ERR(phy); + goto put_child; } miphy_dev->phys[port]->phy = phy; ret = miphy365x_of_probe(child, miphy_phy); if (ret) - return ret; + goto put_child; phy_set_drvdata(phy, miphy_dev->phys[port]); @@ -591,12 +594,15 @@ static int miphy365x_probe(struct platform_device *pdev) &miphy_phy->ctrlreg); if (ret) { dev_err(&pdev->dev, "No sysconfig offset found\n"); - return ret; + goto put_child; } } provider = devm_of_phy_provider_register(&pdev->dev, miphy365x_xlate); return PTR_ERR_OR_ZERO(provider); +put_child: + of_node_put(child); + return ret; } static const struct of_device_id miphy365x_of_match[] = { -- cgit v0.10.2 From a8c24724dd9a31f52c1f7d82530cf4ad3b72cc50 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Nov 2015 12:33:20 +0100 Subject: phy: cygnus: pcie: add missing of_node_put for_each_available_child_of_node performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. A simplified version of the semantic patch that finds this problem is as follows (http://coccinelle.lip6.fr): // @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // Signed-off-by: Julia Lawall Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/phy-bcm-cygnus-pcie.c index 7ad72b7..082c03f 100644 --- a/drivers/phy/phy-bcm-cygnus-pcie.c +++ b/drivers/phy/phy-bcm-cygnus-pcie.c @@ -128,6 +128,7 @@ static int cygnus_pcie_phy_probe(struct platform_device *pdev) struct phy_provider *provider; struct resource *res; unsigned cnt = 0; + int ret; if (of_get_child_count(node) == 0) { dev_err(dev, "PHY no child node\n"); @@ -154,24 +155,28 @@ static int cygnus_pcie_phy_probe(struct platform_device *pdev) if (of_property_read_u32(child, "reg", &id)) { dev_err(dev, "missing reg property for %s\n", child->name); - return -EINVAL; + ret = -EINVAL; + goto put_child; } if (id >= MAX_NUM_PHYS) { dev_err(dev, "invalid PHY id: %u\n", id); - return -EINVAL; + ret = -EINVAL; + goto put_child; } if (core->phys[id].phy) { dev_err(dev, "duplicated PHY id: %u\n", id); - return -EINVAL; + ret = -EINVAL; + goto put_child; } p = &core->phys[id]; p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops); if (IS_ERR(p->phy)) { dev_err(dev, "failed to create PHY\n"); - return PTR_ERR(p->phy); + ret = PTR_ERR(p->phy); + goto put_child; } p->core = core; @@ -191,6 +196,9 @@ static int cygnus_pcie_phy_probe(struct platform_device *pdev) dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt); return 0; +put_child: + of_node_put(child); + return ret; } static const struct of_device_id cygnus_pcie_phy_match_table[] = { -- cgit v0.10.2 From 8c62b4e118cfa7a3c906c01d4ba2c78a5bd97531 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 3 Dec 2015 14:26:52 -0800 Subject: mtd: ofpart: don't complain about missing 'partitions' node too loudly The ofpart partition parser might be run on DT-enabled systems that don't have any "ofpart" partition subnodes at all, since "ofpart" is in the default parser list. So don't complain loudly on every boot. Example: using m25p80.c with no intent to use ofpart: &spi2 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; }; }; I see this warning: [ 0.588471] m25p80 spi2.0: gd25q32 (4096 Kbytes) [ 0.593091] spi2.0: 'partitions' subnode not found on /spi@ff130000/flash@0. Trying to parse direct subnodes as partitions. Cc: Michal Suchanek Signed-off-by: Brian Norris diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 669c345..3e9c585 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -46,8 +46,13 @@ static int parse_ofpart_partitions(struct mtd_info *master, ofpart_node = of_get_child_by_name(mtd_node, "partitions"); if (!ofpart_node) { - pr_warn("%s: 'partitions' subnode not found on %s. Trying to parse direct subnodes as partitions.\n", - master->name, mtd_node->full_name); + /* + * We might get here even when ofpart isn't used at all (e.g., + * when using another parser), so don't be louder than + * KERN_DEBUG + */ + pr_debug("%s: 'partitions' subnode not found on %s. Trying to parse direct subnodes as partitions.\n", + master->name, mtd_node->full_name); ofpart_node = mtd_node; dedicated = false; } -- cgit v0.10.2 From 1dbe162d53e11665b48a1c122899ffc2c068bef4 Mon Sep 17 00:00:00 2001 From: Dongdong Liu Date: Fri, 4 Dec 2015 16:32:25 -0600 Subject: PCI: hisi: Fix hisi_pcie_cfg_read() 32-bit reads For 32-bit config reads (size == 4), hisi_pcie_cfg_read() returned success but never filled in the data we read. Return the register data for 32-bit config reads. Without this fix, PCI doesn't work at all because enumeration depends on 32-bit config reads. The driver was tested internally, but got broken in the process of upstreaming, so this fixes the breakage. Fixes: 500a1d9a43e0 ("PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver") Signed-off-by: Dongdong Liu Signed-off-by: Bjorn Helgaas Reviewed-by: Zhou Wang diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c index 163671a..77f7c66 100644 --- a/drivers/pci/host/pcie-hisi.c +++ b/drivers/pci/host/pcie-hisi.c @@ -61,7 +61,9 @@ static int hisi_pcie_cfg_read(struct pcie_port *pp, int where, int size, *val = *(u8 __force *) walker; else if (size == 2) *val = *(u16 __force *) walker; - else if (size != 4) + else if (size == 4) + *val = reg_val; + else return PCIBIOS_BAD_REGISTER_NUMBER; return PCIBIOS_SUCCESSFUL; -- cgit v0.10.2 From 708744628ba96ed4dfcac74a985eb66ad551f164 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 4 Dec 2015 10:06:29 +0800 Subject: phy: core: Get a refcount to phy in devm_of_phy_get_by_index() On driver detach, devm_phy_release() will put a refcount to the phy, so gets a refconut to it before return. Signed-off-by: Chunfeng Yun Signed-off-by: Kishon Vijay Abraham I diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index fc48fac..8c7f27d 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -636,8 +636,9 @@ EXPORT_SYMBOL_GPL(devm_of_phy_get); * @np: node containing the phy * @index: index of the phy * - * Gets the phy using _of_phy_get(), and associates a device with it using - * devres. On driver detach, release function is invoked on the devres data, + * Gets the phy using _of_phy_get(), then gets a refcount to it, + * and associates a device with it using devres. On driver detach, + * release function is invoked on the devres data, * then, devres data is freed. * */ @@ -651,13 +652,21 @@ struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, return ERR_PTR(-ENOMEM); phy = _of_phy_get(np, index); - if (!IS_ERR(phy)) { - *ptr = phy; - devres_add(dev, ptr); - } else { + if (IS_ERR(phy)) { devres_free(ptr); + return phy; } + if (!try_module_get(phy->ops->owner)) { + devres_free(ptr); + return ERR_PTR(-EPROBE_DEFER); + } + + get_device(&phy->dev); + + *ptr = phy; + devres_add(dev, ptr); + return phy; } EXPORT_SYMBOL_GPL(devm_of_phy_get_by_index); -- cgit v0.10.2 From 6d1a2adef782d26113d4f18a617ccb33c4774d54 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 7 Dec 2015 14:21:37 +0300 Subject: ARC: [axs10x] cap ethernet phy to 100 Mbit/sec Current ARC SDP boards cannot reliably handle 1Gbit Ethernet connections due to limitations in hardware. To make sure networking is stable on the board we're limiting phy to 100 Mbit. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index f3db321..44a578c 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -46,6 +46,7 @@ snps,pbl = < 32 >; clocks = <&apbclk>; clock-names = "stmmaceth"; + max-speed = <100>; }; ehci@0x40000 { -- cgit v0.10.2 From e488ca9f8d4f62c2dc36bfa5c32f68e7f05ab381 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 3 Dec 2015 14:47:32 -0800 Subject: doc: dt: mtd: partitions: add compatible property to "partitions" node As noted here [1], there are potentially future conflicts if we try to use MTD's "partitions" subnode to describe anything besides just the fixed-in-the-device-tree partitions currently described in this document. Particularly, there was a proposal to use this node for the AFS parser too. It can pose a (small) problem to try to differentiate the following nodes: // using binding as currently specified partitions { #address-cells = ; #size-cells = ; partition@0 { ...; }; }; and // proposed future binding partitions { compatible = "arm,arm-flash-structure"; }; It's especially difficult if other uses of this node start having subnodes. So, since the "partitions" node is new in v4.4, let's fixup the binding before release so that it requires a compatible property, so it's much clearer to distinguish. e.g.: // proposed partitions { compatible = "fixed-partitions"; #address-cells = ; #size-cells = ; partition@0 { ...; }; }; [1] Subject: "mtd: create a partition type device tree binding" http://lkml.kernel.org/g/20151113220039.GA74382@google.com http://lists.infradead.org/pipermail/linux-mtd/2015-November/063355.html http://lists.infradead.org/pipermail/linux-mtd/2015-November/063364.html Cc: Michal Suchanek Signed-off-by: Brian Norris Acked-by: Rob Herring diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index f1e2a02..1c63e40 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -6,7 +6,9 @@ used for what purposes, but which don't use an on-flash partition table such as RedBoot. The partition table should be a subnode of the mtd node and should be named -'partitions'. Partitions are defined in subnodes of the partitions node. +'partitions'. This node should have the following property: +- compatible : (required) must be "fixed-partitions" +Partitions are then defined in subnodes of the partitions node. For backwards compatibility partitions as direct subnodes of the mtd device are supported. This use is discouraged. @@ -36,6 +38,7 @@ Examples: flash@0 { partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -53,6 +56,7 @@ flash@0 { flash@1 { partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <2>; @@ -66,6 +70,7 @@ flash@1 { flash@2 { partitions { + compatible = "fixed-partitions"; #address-cells = <2>; #size-cells = <2>; diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 3e9c585..9ed6038 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -55,6 +55,9 @@ static int parse_ofpart_partitions(struct mtd_info *master, master->name, mtd_node->full_name); ofpart_node = mtd_node; dedicated = false; + } else if (!of_device_is_compatible(ofpart_node, "fixed-partitions")) { + /* The 'partitions' subnode might be used by another parser */ + return 0; } /* First count the subnodes */ -- cgit v0.10.2 From 5212f9ae519a3e108205f27eb22929266e688e3e Mon Sep 17 00:00:00 2001 From: Gao Pan Date: Wed, 9 Dec 2015 11:08:22 +0800 Subject: i2c: imx: init bus recovery info before adding i2c adapter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During driver probe, i2c_imx_init_recovery_info() must come before i2c_add_numbered_adapter(), because the get/set_scl() functions are assigned in i2c_register_adapter() under the conditon that bus recover_info are initialized. Otherwise, get/set_scl() function pointers never get assigned. In such case, when i2c_generic_gpio_recovery() is used for bus recovery, there will be kernel crash because bri->set_scl is NULL. The solution to this bug is moving i2c_imx_init_recovery_info() before i2c_register_adapter(). Signed-off-by: Gao Pan Signed-off-by: Fugang Duan Acked-by: Uwe Kleine-König Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 9bb0b05..d4d8536 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1119,6 +1119,8 @@ static int i2c_imx_probe(struct platform_device *pdev) i2c_imx, IMX_I2C_I2CR); imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR); + i2c_imx_init_recovery_info(i2c_imx, pdev); + /* Add I2C adapter */ ret = i2c_add_numbered_adapter(&i2c_imx->adapter); if (ret < 0) { @@ -1126,8 +1128,6 @@ static int i2c_imx_probe(struct platform_device *pdev) goto clk_disable; } - i2c_imx_init_recovery_info(i2c_imx, pdev); - /* Set up platform driver data */ platform_set_drvdata(pdev, i2c_imx); clk_disable_unprepare(i2c_imx->clk); -- cgit v0.10.2 From 84ebac4d04d25ac5c1b1dc3ae621fd465eb38f4e Mon Sep 17 00:00:00 2001 From: John Keeping Date: Wed, 9 Dec 2015 11:38:13 +0000 Subject: ASoC: es8328: Fix deemphasis values This is using completely the wrong mask and value when updating the register. Since the correct values are already defined in the header, switch to using a table with explicit constants rather than shifting the array index. Signed-off-by: John Keeping Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c index 969e337..c4c64e21 100644 --- a/sound/soc/codecs/es8328.c +++ b/sound/soc/codecs/es8328.c @@ -85,7 +85,15 @@ static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 300, 0); static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); static const DECLARE_TLV_DB_SCALE(mic_tlv, 0, 300, 0); -static const int deemph_settings[] = { 0, 32000, 44100, 48000 }; +static const struct { + int rate; + unsigned int val; +} deemph_settings[] = { + { 0, ES8328_DACCONTROL6_DEEMPH_OFF }, + { 32000, ES8328_DACCONTROL6_DEEMPH_32k }, + { 44100, ES8328_DACCONTROL6_DEEMPH_44_1k }, + { 48000, ES8328_DACCONTROL6_DEEMPH_48k }, +}; static int es8328_set_deemph(struct snd_soc_codec *codec) { @@ -97,21 +105,22 @@ static int es8328_set_deemph(struct snd_soc_codec *codec) * rate. */ if (es8328->deemph) { - best = 1; - for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { - if (abs(deemph_settings[i] - es8328->playback_fs) < - abs(deemph_settings[best] - es8328->playback_fs)) + best = 0; + for (i = 1; i < ARRAY_SIZE(deemph_settings); i++) { + if (abs(deemph_settings[i].rate - es8328->playback_fs) < + abs(deemph_settings[best].rate - es8328->playback_fs)) best = i; } - val = best << 1; + val = deemph_settings[best].val; } else { - val = 0; + val = ES8328_DACCONTROL6_DEEMPH_OFF; } dev_dbg(codec->dev, "Set deemphasis %d\n", val); - return snd_soc_update_bits(codec, ES8328_DACCONTROL6, 0x6, val); + return snd_soc_update_bits(codec, ES8328_DACCONTROL6, + ES8328_DACCONTROL6_DEEMPH_MASK, val); } static int es8328_get_deemph(struct snd_kcontrol *kcontrol, diff --git a/sound/soc/codecs/es8328.h b/sound/soc/codecs/es8328.h index cb36afe..156c748 100644 --- a/sound/soc/codecs/es8328.h +++ b/sound/soc/codecs/es8328.h @@ -153,6 +153,7 @@ int es8328_probe(struct device *dev, struct regmap *regmap); #define ES8328_DACCONTROL6_CLICKFREE (1 << 3) #define ES8328_DACCONTROL6_DAC_INVR (1 << 4) #define ES8328_DACCONTROL6_DAC_INVL (1 << 5) +#define ES8328_DACCONTROL6_DEEMPH_MASK (3 << 6) #define ES8328_DACCONTROL6_DEEMPH_OFF (0 << 6) #define ES8328_DACCONTROL6_DEEMPH_32k (1 << 6) #define ES8328_DACCONTROL6_DEEMPH_44_1k (2 << 6) -- cgit v0.10.2 From c20875a3e638e4a03e099b343ec798edd1af5cc6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 12 Nov 2015 16:43:02 +1100 Subject: KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR Currently it is possible for userspace (e.g. QEMU) to set a value for the MSR for a guest VCPU which has both of the TS bits set, which is an illegal combination. The result of this is that when we execute a hrfid (hypervisor return from interrupt doubleword) instruction to enter the guest, the CPU will take a TM Bad Thing type of program interrupt (vector 0x700). Now, if PR KVM is configured in the kernel along with HV KVM, we actually handle this without crashing the host or giving hypervisor privilege to the guest; instead what happens is that we deliver a program interrupt to the guest, with SRR0 reflecting the address of the hrfid instruction and SRR1 containing the MSR value at that point. If PR KVM is not configured in the kernel, then we try to run the host's program interrupt handler with the MMU set to the guest context, which almost certainly causes a host crash. This closes the hole by making kvmppc_set_msr_hv() check for the illegal combination and force the TS field to a safe value (00, meaning non-transactional). Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 54b45b7..a7352b5 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -224,6 +224,12 @@ static void kvmppc_core_vcpu_put_hv(struct kvm_vcpu *vcpu) static void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr) { + /* + * Check for illegal transactional state bit combination + * and if we find it, force the TS field to a safe state. + */ + if ((msr & MSR_TS_MASK) == MSR_TS_MASK) + msr &= ~MSR_TS_MASK; vcpu->arch.shregs.msr = msr; kvmppc_end_cede(vcpu); } -- cgit v0.10.2 From ffe12855a5f7f195589130197558e6a5c276caa4 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 30 Nov 2015 16:21:38 +0100 Subject: PM / Domains: Allow runtime PM callbacks to be re-used during system PM A runtime PM centric subsystem/driver may typically use the runtime PM helpers, pm_runtime_force_suspend|resume() in the system PM path. This means the genpd's runtime PM callbacks might be invoked even when runtime PM has been disabled for the device. To properly cope with these and similar scenarios when these helper functions are used, change genpd to skip validating and measuring the device PM QOS latency. This is needed because otherwise genpd may prevent the device to be put into low power state. If this occurs during system PM, it causes the sequence to be aborted as a device's system PM callback returns -EBUSY. Fixes: ba2bbfbf6307 (PM / Domains: Remove intermediate states from the power off sequence) Reported-by: Cao Minh Hiep Reported-by: Harunaga Signed-off-by: Ulf Hansson Cc: 4.3+ # 4.3+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 4e3a1f1..8ad59f3 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -390,6 +390,7 @@ static int pm_genpd_runtime_suspend(struct device *dev) struct generic_pm_domain *genpd; bool (*stop_ok)(struct device *__dev); struct gpd_timing_data *td = &dev_gpd_data(dev)->td; + bool runtime_pm = pm_runtime_enabled(dev); ktime_t time_start; s64 elapsed_ns; int ret; @@ -400,12 +401,19 @@ static int pm_genpd_runtime_suspend(struct device *dev) if (IS_ERR(genpd)) return -EINVAL; + /* + * A runtime PM centric subsystem/driver may re-use the runtime PM + * callbacks for other purposes than runtime PM. In those scenarios + * runtime PM is disabled. Under these circumstances, we shall skip + * validating/measuring the PM QoS latency. + */ stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL; - if (stop_ok && !stop_ok(dev)) + if (runtime_pm && stop_ok && !stop_ok(dev)) return -EBUSY; /* Measure suspend latency. */ - time_start = ktime_get(); + if (runtime_pm) + time_start = ktime_get(); ret = genpd_save_dev(genpd, dev); if (ret) @@ -418,13 +426,15 @@ static int pm_genpd_runtime_suspend(struct device *dev) } /* Update suspend latency value if the measured time exceeds it. */ - elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); - if (elapsed_ns > td->suspend_latency_ns) { - td->suspend_latency_ns = elapsed_ns; - dev_dbg(dev, "suspend latency exceeded, %lld ns\n", - elapsed_ns); - genpd->max_off_time_changed = true; - td->constraint_changed = true; + if (runtime_pm) { + elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); + if (elapsed_ns > td->suspend_latency_ns) { + td->suspend_latency_ns = elapsed_ns; + dev_dbg(dev, "suspend latency exceeded, %lld ns\n", + elapsed_ns); + genpd->max_off_time_changed = true; + td->constraint_changed = true; + } } /* @@ -453,6 +463,7 @@ static int pm_genpd_runtime_resume(struct device *dev) { struct generic_pm_domain *genpd; struct gpd_timing_data *td = &dev_gpd_data(dev)->td; + bool runtime_pm = pm_runtime_enabled(dev); ktime_t time_start; s64 elapsed_ns; int ret; @@ -479,14 +490,14 @@ static int pm_genpd_runtime_resume(struct device *dev) out: /* Measure resume latency. */ - if (timed) + if (timed && runtime_pm) time_start = ktime_get(); genpd_start_dev(genpd, dev); genpd_restore_dev(genpd, dev); /* Update resume latency value if the measured time exceeds it. */ - if (timed) { + if (timed && runtime_pm) { elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); if (elapsed_ns > td->resume_latency_ns) { td->resume_latency_ns = elapsed_ns; -- cgit v0.10.2 From 348a0013d54acec35c22958480af054b97b5e4fe Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 27 Nov 2015 12:16:16 +0000 Subject: Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list As of my previous change titled "Btrfs: fix scrub preventing unused block groups from being deleted", the following warning at extent-tree.c:btrfs_delete_unused_bgs() can be hit when we mount the a filesysten with "-o discard": 10263 void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info) 10264 { (...) 10405 if (trimming) { 10406 WARN_ON(!list_empty(&block_group->bg_list)); 10407 spin_lock(&trans->transaction->deleted_bgs_lock); 10408 list_move(&block_group->bg_list, 10409 &trans->transaction->deleted_bgs); 10410 spin_unlock(&trans->transaction->deleted_bgs_lock); 10411 btrfs_get_block_group(block_group); 10412 } (...) This happens because scrub can now add back the block group to the list of unused block groups (fs_info->unused_bgs). This is dangerous because we are moving the block group from the unused block groups list to the list of deleted block groups without holding the lock that protects the source list (fs_info->unused_bgs_lock). The following diagram illustrates how this happens: CPU 1 CPU 2 cleaner_kthread() btrfs_delete_unused_bgs() sees bg X in list fs_info->unused_bgs deletes bg X from list fs_info->unused_bgs scrub_enumerate_chunks() searches device tree using its commit root finds device extent for block group X gets block group X from the tree fs_info->block_group_cache_tree (via btrfs_lookup_block_group()) sets bg X to RO (again) scrub_chunk(bg X) sets bg X back to RW mode adds bg X to the list fs_info->unused_bgs again, since it's still unused and currently not in that list sets bg X to RO mode btrfs_remove_chunk(bg X) --> discard is enabled and bg X is in the fs_info->unused_bgs list again so the warning is triggered --> we move it from that list into the transaction's delete_bgs list, but we can have another task currently manipulating the first list (fs_info->unused_bgs) Fix this by using the same lock (fs_info->unused_bgs_lock) to protect both the list of unused block groups and the list of deleted block groups. This makes it safe and there's not much worry for more lock contention, as this lock is seldom used and only the cleaner kthread adds elements to the list of deleted block groups. The warning goes away too, as this was previously an impossible case (and would have been better a BUG_ON/ASSERT) but it's not impossible anymore. Reproduced with fstest btrfs/073 (using MOUNT_OPTIONS="-o discard"). Signed-off-by: Filipe Manana diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 4b89680a..c4661db 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -10480,11 +10480,15 @@ void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info) * until transaction commit to do the actual discard. */ if (trimming) { - WARN_ON(!list_empty(&block_group->bg_list)); - spin_lock(&trans->transaction->deleted_bgs_lock); + spin_lock(&fs_info->unused_bgs_lock); + /* + * A concurrent scrub might have added us to the list + * fs_info->unused_bgs, so use a list_move operation + * to add the block group to the deleted_bgs list. + */ list_move(&block_group->bg_list, &trans->transaction->deleted_bgs); - spin_unlock(&trans->transaction->deleted_bgs_lock); + spin_unlock(&fs_info->unused_bgs_lock); btrfs_get_block_group(block_group); } end_trans: diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 3367a3c..be8eae8 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -274,7 +274,6 @@ loop: cur_trans->num_dirty_bgs = 0; spin_lock_init(&cur_trans->dirty_bgs_lock); INIT_LIST_HEAD(&cur_trans->deleted_bgs); - spin_lock_init(&cur_trans->deleted_bgs_lock); spin_lock_init(&cur_trans->dropped_roots_lock); list_add_tail(&cur_trans->list, &fs_info->trans_list); extent_io_tree_init(&cur_trans->dirty_pages, diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index 0da21ca..64c8221 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -77,8 +77,8 @@ struct btrfs_transaction { */ struct mutex cache_write_mutex; spinlock_t dirty_bgs_lock; + /* Protected by spin lock fs_info->unused_bgs_lock. */ struct list_head deleted_bgs; - spinlock_t deleted_bgs_lock; spinlock_t dropped_roots_lock; struct btrfs_delayed_ref_root delayed_refs; int aborted; -- cgit v0.10.2 From 8a7d656f3dfb7889316ba57502f1eaa6106fd6f8 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 10 Dec 2015 11:08:59 +0000 Subject: Btrfs: fix transaction handle leak in balance If we fail to allocate a new data chunk, we were jumping to the error path without release the transaction handle we got before. Fix this by always releasing it before doing the jump. Fixes: 2c9fe8355258 ("btrfs: Fix lost-data-profile caused by balance bg") Signed-off-by: Filipe Manana diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 750285e..86124cd 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3548,12 +3548,11 @@ again: ret = btrfs_force_chunk_alloc(trans, chunk_root, BTRFS_BLOCK_GROUP_DATA); + btrfs_end_transaction(trans, chunk_root); if (ret < 0) { mutex_unlock(&fs_info->delete_unused_bgs_mutex); goto error; } - - btrfs_end_transaction(trans, chunk_root); chunk_reserved = 1; } -- cgit v0.10.2 From 94356889c404faf050895099fd0d23f8bef118c4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Holger=20Hoffst=C3=A4tte?= Date: Fri, 27 Nov 2015 17:32:04 +0100 Subject: btrfs: fix misleading warning when space cache failed to load MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When an inconsistent space cache is detected during loading we log a warning that users frequently mistake as instruction to invalidate the cache manually, even though this is not required. Fix the message to indicate that the cache will be rebuilt automatically. Signed-off-by: Holger Hoffstätte Acked-by: Filipe Manana diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 0948d34..7a91770 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -891,7 +891,7 @@ out: spin_unlock(&block_group->lock); ret = 0; - btrfs_warn(fs_info, "failed to load free space cache for block group %llu, rebuild it now", + btrfs_warn(fs_info, "failed to load free space cache for block group %llu, rebuilding it now", block_group->key.objectid); } -- cgit v0.10.2 From 3417c1b5cb1fdc10261dbed42b05cc93166a78fd Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 8 Dec 2015 09:00:31 -0800 Subject: ses: Fix problems with simple enclosures Simple enclosure implementations (mostly USB) are allowed to return only page 8 to every diagnostic query. That really confuses our implementation because we assume the return is the page we asked for and end up doing incorrect offsets based on bogus information leading to accesses outside of allocated ranges. Fix that by checking the page code of the return and giving an error if it isn't the one we asked for. This should fix reported bugs with USB storage by simply refusing to attach to enclosures that behave like this. It's also good defensive practise now that we're starting to see more USB enclosures. Reported-by: Andrea Gelmini Cc: stable@vger.kernel.org Reviewed-by: Ewan D. Milne Reviewed-by: Tomas Henzl Signed-off-by: James Bottomley diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index dcb0d76..7d9cec5 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -84,6 +84,7 @@ static void init_device_slot_control(unsigned char *dest_desc, static int ses_recv_diag(struct scsi_device *sdev, int page_code, void *buf, int bufflen) { + int ret; unsigned char cmd[] = { RECEIVE_DIAGNOSTIC, 1, /* Set PCV bit */ @@ -92,9 +93,26 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, bufflen & 0xff, 0 }; + unsigned char recv_page_code; - return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, + ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, NULL, SES_TIMEOUT, SES_RETRIES, NULL); + if (unlikely(!ret)) + return ret; + + recv_page_code = ((unsigned char *)buf)[0]; + + if (likely(recv_page_code == page_code)) + return ret; + + /* successful diagnostic but wrong page code. This happens to some + * USB devices, just print a message and pretend there was an error */ + + sdev_printk(KERN_ERR, sdev, + "Wrong diagnostic page; asked for %d got %u\n", + page_code, recv_page_code); + + return -EINVAL; } static int ses_send_diag(struct scsi_device *sdev, int page_code, -- cgit v0.10.2 From 00917b5c55aeb01322d5ab51af8c025b82959224 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 1 Dec 2015 10:10:21 -0600 Subject: hwmon: (tmp102) Force wait for conversion time for the first valid data TMP102 works based on conversions done periodically. However, as per the TMP102 data sheet[1] the first conversion is triggered immediately after we program the configuration register. The temperature data registers do not reflect proper data until the first conversion is complete (in our case HZ/4). The driver currently sets the last_update to be jiffies - HZ, just after the configuration is complete. When TMP102 driver registers with the thermal framework, it immediately tries to read the sensor temperature data. This takes place even before the conversion on the TMP102 is complete and results in an invalid temperature read. Depending on the value read, this may cause thermal framework to assume that a critical temperature event has occurred and attempts to shutdown the system. Instead of causing an invalid mid-conversion value to be read erroneously, we mark the last_update to be in-line with the current jiffies. This allows the tmp102_update_device function to skip update until the required conversion time is complete. Further, we ensure to return -EAGAIN result instead of returning spurious temperature (such as 0C) values to the caller to prevent any wrong decisions made with such values. NOTE: this allows the read functions not to be blocking and allows the callers to make the decision if they would like to block or try again later. At least the current user(thermal) seems to handle this by retrying later. A simpler alternative approach could be to sleep in the probe for the duration required, but that will result in latency that is undesirable and delay boot sequence un-necessarily. [1] http://www.ti.com/lit/ds/symlink/tmp102.pdf Cc: Eduardo Valentin Reported-by: Aparna Balasubramanian Reported-by: Elvita Lobo Reported-by: Yan Liu Signed-off-by: Nishanth Menon Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 6548262..5289aa0 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -58,6 +58,7 @@ struct tmp102 { u16 config_orig; unsigned long last_update; int temp[3]; + bool first_time; }; /* convert left adjusted 13-bit TMP102 register value to milliCelsius */ @@ -93,6 +94,7 @@ static struct tmp102 *tmp102_update_device(struct device *dev) tmp102->temp[i] = tmp102_reg_to_mC(status); } tmp102->last_update = jiffies; + tmp102->first_time = false; } mutex_unlock(&tmp102->lock); return tmp102; @@ -102,6 +104,12 @@ static int tmp102_read_temp(void *dev, int *temp) { struct tmp102 *tmp102 = tmp102_update_device(dev); + /* Is it too early even to return a conversion? */ + if (tmp102->first_time) { + dev_dbg(dev, "%s: Conversion not ready yet..\n", __func__); + return -EAGAIN; + } + *temp = tmp102->temp[0]; return 0; @@ -114,6 +122,10 @@ static ssize_t tmp102_show_temp(struct device *dev, struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); struct tmp102 *tmp102 = tmp102_update_device(dev); + /* Is it too early even to return a read? */ + if (tmp102->first_time) + return -EAGAIN; + return sprintf(buf, "%d\n", tmp102->temp[sda->index]); } @@ -207,7 +219,9 @@ static int tmp102_probe(struct i2c_client *client, status = -ENODEV; goto fail_restore_config; } - tmp102->last_update = jiffies - HZ; + tmp102->last_update = jiffies; + /* Mark that we are not ready with data until conversion is complete */ + tmp102->first_time = true; mutex_init(&tmp102->lock); hwmon_dev = hwmon_device_register_with_groups(dev, client->name, -- cgit v0.10.2 From 46435d4c35336e169a198ef5cd51f9427e78ed62 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 25 Nov 2015 15:40:51 +0800 Subject: pinctrl: freescale: add ZERO_OFFSET_VALID flag for vf610 pinctrl To support i.MX7D Low Power State Retention IOMUXC, commit e7b37a522aa9 ("pinctrl: freescale: imx: allow mux_reg offset zero") changes the way of zero mux_reg offset support with a new flag ZERO_OFFSET_VALID. But, unfortunately, it forgot to add this flag for vf610 pinctrl which has zero mux_reg offset be valid as well, and hence breaks the vf610 support. Fix the regression by adding flag ZERO_OFFSET_VALID for vf610 pinctrl driver. Signed-off-by: Shawn Guo Fixes: e7b37a522aa9 ("pinctrl: freescale: imx: allow mux_reg offset zero") Reported-by: Andrew Lunn Tested-by: Andrew Lunn Acked-by: Stefan Agner Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/freescale/pinctrl-vf610.c b/drivers/pinctrl/freescale/pinctrl-vf610.c index 37a0375..587d1ff 100644 --- a/drivers/pinctrl/freescale/pinctrl-vf610.c +++ b/drivers/pinctrl/freescale/pinctrl-vf610.c @@ -299,7 +299,7 @@ static const struct pinctrl_pin_desc vf610_pinctrl_pads[] = { static struct imx_pinctrl_soc_info vf610_pinctrl_info = { .pins = vf610_pinctrl_pads, .npins = ARRAY_SIZE(vf610_pinctrl_pads), - .flags = SHARE_MUX_CONF_REG, + .flags = SHARE_MUX_CONF_REG | ZERO_OFFSET_VALID, }; static const struct of_device_id vf610_pinctrl_of_match[] = { -- cgit v0.10.2 From 1c69d3b6eb73e466ecbb8edaf1bc7fd585b288da Mon Sep 17 00:00:00 2001 From: Ken Xue Date: Tue, 1 Dec 2015 14:45:23 +0800 Subject: Revert "SCSI: Fix NULL pointer dereference in runtime PM" This reverts commit 49718f0fb8c9 ("SCSI: Fix NULL pointer dereference in runtime PM") The old commit may lead to a issue that blk_{pre|post}_runtime_suspend and blk_{pre|post}_runtime_resume may not be called in pairs. Take sr device as example, when sr device goes to runtime suspend, blk_{pre|post}_runtime_suspend will be called since sr device defined pm->runtime_suspend. But blk_{pre|post}_runtime_resume will not be called since sr device doesn't have pm->runtime_resume. so, sr device can not resume correctly anymore. More discussion can be found from below link. http://marc.info/?l=linux-scsi&m=144163730531875&w=2 Signed-off-by: Ken Xue Acked-by: Alan Stern Cc: Xiangliang Yu Cc: James E.J. Bottomley Cc: Jens Axboe Cc: Michael Terry Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index e4b7998..459abe1 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -219,13 +219,13 @@ static int sdev_runtime_suspend(struct device *dev) struct scsi_device *sdev = to_scsi_device(dev); int err = 0; - if (pm && pm->runtime_suspend) { - err = blk_pre_runtime_suspend(sdev->request_queue); - if (err) - return err; + err = blk_pre_runtime_suspend(sdev->request_queue); + if (err) + return err; + if (pm && pm->runtime_suspend) err = pm->runtime_suspend(dev); - blk_post_runtime_suspend(sdev->request_queue, err); - } + blk_post_runtime_suspend(sdev->request_queue, err); + return err; } @@ -248,11 +248,11 @@ static int sdev_runtime_resume(struct device *dev) const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int err = 0; - if (pm && pm->runtime_resume) { - blk_pre_runtime_resume(sdev->request_queue); + blk_pre_runtime_resume(sdev->request_queue); + if (pm && pm->runtime_resume) err = pm->runtime_resume(dev); - blk_post_runtime_resume(sdev->request_queue, err); - } + blk_post_runtime_resume(sdev->request_queue, err); + return err; } -- cgit v0.10.2 From 618a919b4c5150408c26f8b4527851f7065f841c Mon Sep 17 00:00:00 2001 From: Qipeng Zha Date: Thu, 26 Nov 2015 01:09:51 +0800 Subject: pinctrl: intel: fix bug of register offset calculation The group size for registers PADCFGLOCK, HOSTSW_OWN, GPI_IS, GPI_IE, are not 24 for Broxton, Add a parameter to allow different platform to set correct value. Signed-off-by: Qi Zheng Signed-off-by: Qipeng Zha Acked-by: Mika Westerberg Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/intel/pinctrl-broxton.c b/drivers/pinctrl/intel/pinctrl-broxton.c index e42d5d4..5979d38 100644 --- a/drivers/pinctrl/intel/pinctrl-broxton.c +++ b/drivers/pinctrl/intel/pinctrl-broxton.c @@ -28,6 +28,7 @@ .padcfglock_offset = BXT_PADCFGLOCK, \ .hostown_offset = BXT_HOSTSW_OWN, \ .ie_offset = BXT_GPI_IE, \ + .gpp_size = 32, \ .pin_base = (s), \ .npins = ((e) - (s) + 1), \ } diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 392e28d..06004d8 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -25,9 +25,6 @@ #include "pinctrl-intel.h" -/* Maximum number of pads in each group */ -#define NPADS_IN_GPP 24 - /* Offset from regs */ #define PADBAR 0x00c #define GPI_IS 0x100 @@ -173,11 +170,11 @@ static bool intel_pad_acpi_mode(struct intel_pinctrl *pctrl, unsigned pin) return false; padno = pin_to_padno(community, pin); - gpp = padno / NPADS_IN_GPP; + gpp = padno / community->gpp_size; offset = community->hostown_offset + gpp * 4; hostown = community->regs + offset; - return !(readl(hostown) & BIT(padno % NPADS_IN_GPP)); + return !(readl(hostown) & BIT(padno % community->gpp_size)); } static bool intel_pad_locked(struct intel_pinctrl *pctrl, unsigned pin) @@ -193,7 +190,7 @@ static bool intel_pad_locked(struct intel_pinctrl *pctrl, unsigned pin) return false; padno = pin_to_padno(community, pin); - gpp = padno / NPADS_IN_GPP; + gpp = padno / community->gpp_size; /* * If PADCFGLOCK and PADCFGLOCKTX bits are both clear for this pad, @@ -202,12 +199,12 @@ static bool intel_pad_locked(struct intel_pinctrl *pctrl, unsigned pin) */ offset = community->padcfglock_offset + gpp * 8; value = readl(community->regs + offset); - if (value & BIT(pin % NPADS_IN_GPP)) + if (value & BIT(pin % community->gpp_size)) return true; offset = community->padcfglock_offset + 4 + gpp * 8; value = readl(community->regs + offset); - if (value & BIT(pin % NPADS_IN_GPP)) + if (value & BIT(pin % community->gpp_size)) return true; return false; @@ -663,8 +660,8 @@ static void intel_gpio_irq_ack(struct irq_data *d) community = intel_get_community(pctrl, pin); if (community) { unsigned padno = pin_to_padno(community, pin); - unsigned gpp_offset = padno % NPADS_IN_GPP; - unsigned gpp = padno / NPADS_IN_GPP; + unsigned gpp_offset = padno % community->gpp_size; + unsigned gpp = padno / community->gpp_size; writel(BIT(gpp_offset), community->regs + GPI_IS + gpp * 4); } @@ -685,8 +682,8 @@ static void intel_gpio_irq_mask_unmask(struct irq_data *d, bool mask) community = intel_get_community(pctrl, pin); if (community) { unsigned padno = pin_to_padno(community, pin); - unsigned gpp_offset = padno % NPADS_IN_GPP; - unsigned gpp = padno / NPADS_IN_GPP; + unsigned gpp_offset = padno % community->gpp_size; + unsigned gpp = padno / community->gpp_size; void __iomem *reg; u32 value; @@ -780,8 +777,8 @@ static int intel_gpio_irq_wake(struct irq_data *d, unsigned int on) return -EINVAL; padno = pin_to_padno(community, pin); - gpp = padno / NPADS_IN_GPP; - gpp_offset = padno % NPADS_IN_GPP; + gpp = padno / community->gpp_size; + gpp_offset = padno % community->gpp_size; /* Clear the existing wake status */ writel(BIT(gpp_offset), community->regs + GPI_GPE_STS + gpp * 4); @@ -819,14 +816,14 @@ static irqreturn_t intel_gpio_community_irq_handler(struct intel_pinctrl *pctrl, /* Only interrupts that are enabled */ pending &= enabled; - for_each_set_bit(gpp_offset, &pending, NPADS_IN_GPP) { + for_each_set_bit(gpp_offset, &pending, community->gpp_size) { unsigned padno, irq; /* * The last group in community can have less pins * than NPADS_IN_GPP. */ - padno = gpp_offset + gpp * NPADS_IN_GPP; + padno = gpp_offset + gpp * community->gpp_size; if (padno >= community->npins) break; @@ -1002,7 +999,8 @@ int intel_pinctrl_probe(struct platform_device *pdev, community->regs = regs; community->pad_regs = regs + padbar; - community->ngpps = DIV_ROUND_UP(community->npins, NPADS_IN_GPP); + community->ngpps = DIV_ROUND_UP(community->npins, + community->gpp_size); } irq = platform_get_irq(pdev, 0); diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h index 4ec8b57..b602157 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.h +++ b/drivers/pinctrl/intel/pinctrl-intel.h @@ -55,6 +55,8 @@ struct intel_function { * ACPI). * @ie_offset: Register offset of GPI_IE from @regs. * @pin_base: Starting pin of pins in this community + * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK, + * HOSTSW_OWN, GPI_IS, GPI_IE, etc. * @npins: Number of pins in this community * @regs: Community specific common registers (reserved for core driver) * @pad_regs: Community specific pad registers (reserved for core driver) @@ -68,6 +70,7 @@ struct intel_community { unsigned hostown_offset; unsigned ie_offset; unsigned pin_base; + unsigned gpp_size; size_t npins; void __iomem *regs; void __iomem *pad_regs; diff --git a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c index 1de9ae5..c725a53 100644 --- a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c +++ b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c @@ -30,6 +30,7 @@ .padcfglock_offset = SPT_PADCFGLOCK, \ .hostown_offset = SPT_HOSTSW_OWN, \ .ie_offset = SPT_GPI_IE, \ + .gpp_size = 24, \ .pin_base = (s), \ .npins = ((e) - (s) + 1), \ } -- cgit v0.10.2 From 99a735b3c287b70aa67952b1ff3d85cd924d85f9 Mon Sep 17 00:00:00 2001 From: Qipeng Zha Date: Mon, 30 Nov 2015 19:20:16 +0800 Subject: pinctrl: intel: fix offset calculation issue of register PAD_OWN The calculation equation of PAD_OWN register offset is not correct for Broxton, verified this fix will get right offset for Broxton. Signed-off-by: Qi Zheng Signed-off-by: Qipeng Zha Acked-by: Mika Westerberg Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 06004d8..26f6b6f 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -34,6 +34,7 @@ #define PADOWN_BITS 4 #define PADOWN_SHIFT(p) ((p) % 8 * PADOWN_BITS) #define PADOWN_MASK(p) (0xf << PADOWN_SHIFT(p)) +#define PADOWN_GPP(p) ((p) / 8) /* Offset from pad_regs */ #define PADCFG0 0x000 @@ -139,7 +140,7 @@ static void __iomem *intel_get_padcfg(struct intel_pinctrl *pctrl, unsigned pin, static bool intel_pad_owned_by_host(struct intel_pinctrl *pctrl, unsigned pin) { const struct intel_community *community; - unsigned padno, gpp, gpp_offset, offset; + unsigned padno, gpp, offset, group; void __iomem *padown; community = intel_get_community(pctrl, pin); @@ -149,9 +150,9 @@ static bool intel_pad_owned_by_host(struct intel_pinctrl *pctrl, unsigned pin) return true; padno = pin_to_padno(community, pin); - gpp = padno / NPADS_IN_GPP; - gpp_offset = padno % NPADS_IN_GPP; - offset = community->padown_offset + gpp * 16 + (gpp_offset / 8) * 4; + group = padno / community->gpp_size; + gpp = PADOWN_GPP(padno % community->gpp_size); + offset = community->padown_offset + 0x10 * group + gpp * 4; padown = community->regs + offset; return !(readl(padown) & PADOWN_MASK(padno)); -- cgit v0.10.2 From e2a0c9fa80227be5ee017b5476638829dd41cb39 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 11 Dec 2015 13:06:24 +0200 Subject: ASoC: davinci-mcasp: Fix XDATA check in mcasp_start_tx The condition for checking for XDAT being cleared was not correct. Fixes: 36bcecd0a73eb ("ASoC: davinci-mcasp: Correct TX start sequence") Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 4495a40..41235d3 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -223,8 +223,8 @@ static void mcasp_start_tx(struct davinci_mcasp *mcasp) /* wait for XDATA to be cleared */ cnt = 0; - while (!(mcasp_get_reg(mcasp, DAVINCI_MCASP_TXSTAT_REG) & - ~XRDATA) && (cnt < 100000)) + while ((mcasp_get_reg(mcasp, DAVINCI_MCASP_TXSTAT_REG) & XRDATA) && + (cnt < 100000)) cnt++; /* Release TX state machine */ -- cgit v0.10.2 From 8b89fe1f6c430589122542f228a802d34995bebd Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 10 Dec 2015 18:37:32 +0100 Subject: kvm: x86: move tracepoints outside extended quiescent state Invoking tracepoints within kvm_guest_enter/kvm_guest_exit causes a lockdep splat. Reported-by: Borislav Petkov Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 83a1c64..899c40f 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -3422,6 +3422,8 @@ static int handle_exit(struct kvm_vcpu *vcpu) struct kvm_run *kvm_run = vcpu->run; u32 exit_code = svm->vmcb->control.exit_code; + trace_kvm_exit(exit_code, vcpu, KVM_ISA_SVM); + if (!is_cr_intercept(svm, INTERCEPT_CR0_WRITE)) vcpu->arch.cr0 = svm->vmcb->save.cr0; if (npt_enabled) @@ -3892,8 +3894,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu) vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp; vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip; - trace_kvm_exit(svm->vmcb->control.exit_code, vcpu, KVM_ISA_SVM); - if (unlikely(svm->vmcb->control.exit_code == SVM_EXIT_NMI)) kvm_before_handle_nmi(&svm->vcpu); diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index af823a3..6b56056 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -8042,6 +8042,8 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu) u32 exit_reason = vmx->exit_reason; u32 vectoring_info = vmx->idt_vectoring_info; + trace_kvm_exit(exit_reason, vcpu, KVM_ISA_VMX); + /* * Flush logged GPAs PML buffer, this will make dirty_bitmap more * updated. Another good is, in kvm_vm_ioctl_get_dirty_log, before @@ -8668,7 +8670,6 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) vmx->loaded_vmcs->launched = 1; vmx->exit_reason = vmcs_read32(VM_EXIT_REASON); - trace_kvm_exit(vmx->exit_reason, vcpu, KVM_ISA_VMX); /* * the KVM_REQ_EVENT optimization bit is only on for one entry, and if diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index eed3228..b84ba4b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6515,6 +6515,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) if (req_immediate_exit) smp_send_reschedule(vcpu->cpu); + trace_kvm_entry(vcpu->vcpu_id); + wait_lapic_expire(vcpu); __kvm_guest_enter(); if (unlikely(vcpu->arch.switch_db_regs)) { @@ -6527,8 +6529,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD; } - trace_kvm_entry(vcpu->vcpu_id); - wait_lapic_expire(vcpu); kvm_x86_ops->run(vcpu); /* -- cgit v0.10.2 From fdec12c12ed4333afb49c9948c29fbd5fb52da97 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Thu, 10 Dec 2015 22:46:50 +0100 Subject: KVM: arm/arm64: vgic: Fix kvm_vgic_map_is_active's dist check External inputs to the vgic from time to time need to poke into the state of a virtual interrupt, the prime example is the architected timer code. Since the IRQ's active state can be represented in two places; the LR or the distributor, we first loop over the LRs but if not active in the LRs we just return if *any* IRQ is active on the VCPU in question. This is of course bogus, as we should check if the specific IRQ in quesiton is active on the distributor instead. Reported-by: Eric Auger Acked-by: Marc Zyngier Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c index 65461f8..7a2f449 100644 --- a/virt/kvm/arm/vgic.c +++ b/virt/kvm/arm/vgic.c @@ -1114,7 +1114,7 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map) return true; } - return dist_active_irq(vcpu); + return vgic_irq_is_active(vcpu, map->virt_irq); } /* -- cgit v0.10.2 From 3a57e741621eb759ba9d1743bed6a3ccf5472d10 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 8 Dec 2015 23:01:07 +0800 Subject: gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register Signed-off-by: Axel Lin Acked-by: Alban Bedel Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c index e5827a5..5eaea8b 100644 --- a/drivers/gpio/gpio-ath79.c +++ b/drivers/gpio/gpio-ath79.c @@ -113,7 +113,7 @@ static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset, __raw_writel(BIT(offset), ctrl->base + AR71XX_GPIO_REG_CLEAR); __raw_writel( - __raw_readl(ctrl->base + AR71XX_GPIO_REG_OE) & BIT(offset), + __raw_readl(ctrl->base + AR71XX_GPIO_REG_OE) & ~BIT(offset), ctrl->base + AR71XX_GPIO_REG_OE); spin_unlock_irqrestore(&ctrl->lock, flags); -- cgit v0.10.2 From 5e1033561da1152c57b97ee84371dba2b3d64c25 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 11 Dec 2015 09:16:38 -0800 Subject: ses: fix additional element traversal bug KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by: Pavel Tikhomirov Tested-by: Pavel Tikhomirov Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 7d9cec5..044d064 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -559,7 +559,15 @@ static void ses_enclosure_data_process(struct enclosure_device *edev, if (desc_ptr) desc_ptr += len; - if (addl_desc_ptr) + if (addl_desc_ptr && + /* only find additional descriptions for specific devices */ + (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || + type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE || + type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER || + /* these elements are optional */ + type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT || + type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT || + type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) addl_desc_ptr += addl_desc_ptr[1] + 2; } diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h index 7be22da..a4cf57c 100644 --- a/include/linux/enclosure.h +++ b/include/linux/enclosure.h @@ -29,7 +29,11 @@ /* A few generic types ... taken from ses-2 */ enum enclosure_component_type { ENCLOSURE_COMPONENT_DEVICE = 0x01, + ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS = 0x07, + ENCLOSURE_COMPONENT_SCSI_TARGET_PORT = 0x14, + ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT = 0x15, ENCLOSURE_COMPONENT_ARRAY_DEVICE = 0x17, + ENCLOSURE_COMPONENT_SAS_EXPANDER = 0x18, }; /* ses-2 common element status */ -- cgit v0.10.2 From b7d21058b40bff47e69a9af7f00c90942ddfbd4f Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 11 Dec 2015 13:22:39 -0800 Subject: Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload The Atmel maxtouch DT binding documents that the compatible string for the device is "atmel,maxtouch" and the I2C core always reports a module alias of the form i2c:alias where alias is the compatible string model: $ grep MODALIAS /sys/devices/platform/12e00000.i2c/i2c-8/8-004b/uevent MODALIAS=i2c:maxtouch But there isn't maxtouch entry in the I2C device ID table so when the i2c:maxtouch MODALIAS uevent is reported, kmod is not able to match the alias with a module to load: $ modinfo atmel_mxt_ts | grep alias alias: of:N*T*Catmel,maxtouch alias: i2c:mXT224 alias: i2c:atmel_mxt_tp alias: i2c:atmel_mxt_ts alias: i2c:qt602240_ts So add the maxtouch entry to the I2C device ID table to allow the module to be autoloaded when the device is registered via OF. Signed-off-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 159120b..2d5794e 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -2734,6 +2734,7 @@ static const struct i2c_device_id mxt_id[] = { { "qt602240_ts", 0 }, { "atmel_mxt_ts", 0 }, { "atmel_mxt_tp", 0 }, + { "maxtouch", 0 }, { "mXT224", 0 }, { } }; -- cgit v0.10.2 From b5832e4b62e6ccdd4d7dcbc36778ea1837d30768 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 8 Dec 2015 22:52:45 +0100 Subject: cpufreq: tegra: add regulator dependency for T124 This driver is the only one that calls regulator_sync_voltage(), but it can currently be built with CONFIG_REGULATOR disabled, producing this build error: drivers/cpufreq/tegra124-cpufreq.c: In function 'tegra124_cpu_switch_to_pllx': drivers/cpufreq/tegra124-cpufreq.c:68:2: error: implicit declaration of function 'regulator_sync_voltage' [-Werror=implicit-function-declaration] regulator_sync_voltage(priv->vdd_cpu_reg); My first attempt was to implement a helper for this function for regulator_sync_voltage, but Mark Brown explained: We don't do this for *all* regulator API functions - there's some where using them strongly suggests that there is actually a dependency on the regulator API. This does seem like it might be falling into the specialist category [...] Looking at the code I'm pretty unclear on what the authors think the use of _sync_voltage() is doing in the first place so it may be even better to just remove the call. It seems to have been included in the first commit so there's not changelog explaining things and there's no comment either. I'd *expect* it to be a noop as far as I can see. This adds the dependency to make the driver always build successfully or not be enabled at all. Alternatively, we could investigate if the driver should stop calling regulator_sync_voltage instead. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Acked-by: Jon Hunter Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 235a1ba..b1f8a73 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -226,7 +226,7 @@ config ARM_TEGRA20_CPUFREQ config ARM_TEGRA124_CPUFREQ tristate "Tegra124 CPUFreq support" - depends on ARCH_TEGRA && CPUFREQ_DT + depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR default y help This adds the CPUFreq driver support for Tegra124 SOCs. -- cgit v0.10.2 From 88b7b7c0c2ba2c1f2c589ee883050717fe91af22 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 8 Dec 2015 13:44:59 -0500 Subject: cpufreq: intel_pstate: Minor cleanup for FRAC_BITS 785ee27 ("cpufreq: intel_pstate: Fix limits->max_perf rounding error") hardcodes the value of FRAC_BITS. This patch fixes that minor issue. Fixes: 785ee2788141 (cpufreq: intel_pstate: Fix limits->max_perf rounding error) Signed-off-by: Prarit Bhargava Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 4d07cbd..98fb882 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1123,7 +1123,7 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits->max_sysfs_pct); limits->max_perf_pct = max(limits->min_policy_pct, limits->max_perf_pct); - limits->max_perf = round_up(limits->max_perf, 8); + limits->max_perf = round_up(limits->max_perf, FRAC_BITS); /* Make sure min_perf_pct <= max_perf_pct */ limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct); -- cgit v0.10.2 From 79a21dbfae3cd40d5a801778071a9967b79c2c20 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Wed, 9 Dec 2015 08:31:12 -0500 Subject: powercap / RAPL: fix BIOS lock check Intel RAPL initialized on several systems where the BIOS lock bit (msr 0x610, bit 63) was set. This occured because the return value of rapl_read_data_raw() was being checked, rather than the value of the variable passed in, locked. This patch properly implments the rapl_read_data_raw() call to check the variable locked, and now the Intel RAPL driver outputs the warning: intel_rapl: RAPL package 0 domain package locked by BIOS and does not initialize for the package. Signed-off-by: Prarit Bhargava Acked-by: Jacob Pan Cc: All applicable Signed-off-by: Rafael J. Wysocki diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c index cc97f08..48747c2 100644 --- a/drivers/powercap/intel_rapl.c +++ b/drivers/powercap/intel_rapl.c @@ -1341,10 +1341,13 @@ static int rapl_detect_domains(struct rapl_package *rp, int cpu) for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) { /* check if the domain is locked by BIOS */ - if (rapl_read_data_raw(rd, FW_LOCK, false, &locked)) { + ret = rapl_read_data_raw(rd, FW_LOCK, false, &locked); + if (ret) + return ret; + if (locked) { pr_info("RAPL package %d domain %s locked by BIOS\n", rp->id, rd->name); - rd->state |= DOMAIN_STATE_BIOS_LOCKED; + rd->state |= DOMAIN_STATE_BIOS_LOCKED; } } -- cgit v0.10.2 From 8eb0984bf4fe82237f95481ff0afe514a676c717 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 15:54:03 +0530 Subject: ARCv2: intc: Fix random perf irq disabling in SMP setup As part of fixing another perf issue, observed that after a perf run, the interrupt got disabled on one/more cores. Turns out that despite requesting perf irq as percpu, the flow handler registered was not handle_percpu_irq() Given that on ARCv2 cores, IRQs < 24 are always private to cpu, we register the right handler at the very onset. Before Fix | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 0 0 0 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 522 8 51916 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 522 8 104368 ARCv2 core Intc 20 ARC perf counters After Fix | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 0 0 0 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 64198 62012 62697 67803 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 126014 122792 123301 133654 ARCv2 core Intc 20 ARC perf counters Cc: Marc Zyngier Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Alexey Brodkin Cc: stable@vger.kernel.org #4.2+ Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 26c1568..0394f9f 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -106,10 +106,21 @@ static struct irq_chip arcv2_irq_chip = { static int arcv2_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) { - if (irq == TIMER0_IRQ || irq == IPI_IRQ) + /* + * core intc IRQs [16, 23]: + * Statically assigned always private-per-core (Timers, WDT, IPI, PCT) + */ + if (hw < 24) { + /* + * A subsequent request_percpu_irq() fails if percpu_devid is + * not set. That in turns sets NOAUTOEN, meaning each core needs + * to call enable_percpu_irq() + */ + irq_set_percpu_devid(irq); irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq); - else + } else { irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq); + } return 0; } -- cgit v0.10.2 From 5bf704c204440b1e90251382ee07a2dc5e4960ec Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 16:16:11 +0530 Subject: ARC: intc: No need to clear IRQ_NOAUTOEN arc_request_percpu_irq() is called by all cores to request/enable percpu irq. It has some "prep" calls needed by genirq: - setup percpu devid - disable IRQ_NOAUTOEN However given that enable_percpu_irq() is called enayways, latter can be avoided. We are now left with irq_set_percpu_devid() quirk and that too for ARCompact builds only, since previous patch updated ARCv2 intc to do this in the "right" place, i.e. irq map function. By next release, this will ultimately be fixed for ARCompact as well. Cc: Marc Zyngier Cc: Thomas Gleixner Cc: Alexey Brodkin Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 2ee2265..d736678 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -60,14 +60,17 @@ void arc_request_percpu_irq(int irq, int cpu, if (!cpu) { int rc; +#ifdef CONFIG_ISA_ARCOMPACT /* - * These 2 calls are essential to making percpu IRQ APIs work - * Ideally these details could be hidden in irq chip map function - * but the issue is IPIs IRQs being static (non-DT) and platform - * specific, so we can't identify them there. + * A subsequent request_percpu_irq() fails if percpu_devid is + * not set. That in turns sets NOAUTOEN, meaning each core needs + * to call enable_percpu_irq() + * + * For ARCv2, this is done in irq map function since we know + * which irqs are strictly per cpu */ irq_set_percpu_devid(irq); - irq_modify_status(irq, IRQ_NOAUTOEN, 0); /* @irq, @clr, @set */ +#endif rc = request_percpu_irq(irq, isr, irq_nm, percpu_dev); if (rc) -- cgit v0.10.2 From c6317bc7c5ab87ba0672a5fab8ef94829f78be02 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 13:13:12 +0530 Subject: ARCv2: perf: Ensure perf intr gets enabled on all cores This was the second perf intr issue perf sampling on multicore requires intr to be enabled on all cores. ARC perf probe code used helper arc_request_percpu_irq() which calls - request_percpu_irq() on core0 - enable_percpu_irq() on all all cores (including core0) genirq requires that request be made ahead of enable call. However if perf probe happened on non core0 (observed on a 3.18 kernel), enable would get called ahead of request, failing obviously and rendering perf intr disabled on all such cores [ 11.120000] 1 ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] [ 11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 0 =====> request_percpu_irq() IRQ 20 [ 11.140000] 0 -----> enable_percpu_irq() IRQ 20 Fix this fragility, by calling request_percpu_irq() on whatever core calls probe (there is no requirement on which core calls this anyways) and then calling enable on each cores. Interestingly this started as invesigation of STAR 9000838902: "sporadically IRQs enabled on perf prob" which was about occassional boot spew as request_percpu_irq got called non-locally (from an IPI), and re-enabled interrupts in following path proc_mkdir -> spin_unlock_irq() which the irq work code didn't like. | ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] | | BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()! | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2 | | Stack Trace: | arc_unwind_core.constprop.1+0x94/0x104 | dump_stack+0x62/0x98 | irq_work_run_list+0xb0/0xb4 | irq_work_run+0x22/0x3c | do_IPI+0x74/0x9c | handle_irq_event_percpu+0x34/0x164 | handle_percpu_irq+0x58/0x78 | generic_handle_irq+0x1e/0x2c | arch_do_IRQ+0x3c/0x60 | ret_from_exception+0x0/0x8 Cc: Marc Zyngier Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Brodkin Cc: #4.2+ Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index 0c08bb1..8b134cf 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -428,12 +428,11 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev) #endif /* CONFIG_ISA_ARCV2 */ -void arc_cpu_pmu_irq_init(void) +static void arc_cpu_pmu_irq_init(void *data) { - struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu); + int irq = *(int *)data; - arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr, - "ARC perf counters", pmu_cpu); + enable_percpu_irq(irq, IRQ_TYPE_NONE); /* Clear all pending interrupt flags */ write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff); @@ -515,7 +514,6 @@ static int arc_pmu_device_probe(struct platform_device *pdev) if (has_interrupts) { int irq = platform_get_irq(pdev, 0); - unsigned long flags; if (irq < 0) { pr_err("Cannot get IRQ number for the platform\n"); @@ -524,24 +522,12 @@ static int arc_pmu_device_probe(struct platform_device *pdev) arc_pmu->irq = irq; - /* - * arc_cpu_pmu_irq_init() needs to be called on all cores for - * their respective local PMU. - * However we use opencoded on_each_cpu() to ensure it is called - * on core0 first, so that arc_request_percpu_irq() sets up - * AUTOEN etc. Otherwise enable_percpu_irq() fails to enable - * perf IRQ on non master cores. - * see arc_request_percpu_irq() - */ - preempt_disable(); - local_irq_save(flags); - arc_cpu_pmu_irq_init(); - local_irq_restore(flags); - smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1); - preempt_enable(); - - /* Clean all pending interrupt flags */ - write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff); + /* intc map function ensures irq_set_percpu_devid() called */ + request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters", + this_cpu_ptr(&arc_pmu_cpu)); + + on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1); + } else arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; -- cgit v0.10.2 From c512c6ba7ac41b8bc196f17a85ee52099a109146 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 19:31:23 +0530 Subject: ARC: intc: Document arc_request_percpu_irq() better Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index d736678..b1f7593 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -51,6 +51,18 @@ void arch_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * API called for requesting percpu interrupts - called by each CPU + * - For boot CPU, actually request the IRQ with genirq core + enables + * - For subsequent callers only enable called locally + * + * Relies on being called by boot cpu first (i.e. request called ahead) of + * any enable as expected by genirq. Hence Suitable only for TIMER, IPI + * which are guaranteed to be setup on boot core first. + * Late probed peripherals such as perf can't use this as there no guarantee + * of being called on boot CPU first. + */ + void arc_request_percpu_irq(int irq, int cpu, irqreturn_t (*isr)(int irq, void *dev), const char *irq_nm, -- cgit v0.10.2 From 2d244c81481fa5142a2ba6656ab7a8e40c849c27 Mon Sep 17 00:00:00 2001 From: Xiangliang Yu Date: Fri, 11 Dec 2015 20:02:53 +0800 Subject: i2c: designware: fix IO timeout issue for AMD controller Because of some hardware limitation, AMD I2C controller can't trigger pending interrupt if interrupt status has been changed after clearing interrupt status bits. Then, I2C will lost interrupt and IO timeout. According to hardware design, this patch implements a workaround to disable i2c controller interrupt and re-enable i2c interrupt before exiting ISR. To reduce the performance impacts on other vendors, use unlikely function to check flag in ISR. Signed-off-by: Xiangliang Yu Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 8c48b27..de7fbbb 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -813,6 +813,12 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) tx_aborted: if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) complete(&dev->cmd_complete); + else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) { + /* workaround to trigger pending interrupt */ + stat = dw_readl(dev, DW_IC_INTR_MASK); + i2c_dw_disable_int(dev); + dw_writel(dev, stat, DW_IC_INTR_MASK); + } return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 1d50898..9ffb63a 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -111,6 +111,7 @@ struct dw_i2c_dev { #define ACCESS_SWAP 0x00000001 #define ACCESS_16BIT 0x00000002 +#define ACCESS_INTR_MASK 0x00000004 extern int i2c_dw_init(struct dw_i2c_dev *dev); extern void i2c_dw_disable(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 809579e..f03ea71 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -93,6 +93,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], static int dw_i2c_acpi_configure(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); + const struct acpi_device_id *id; dev->adapter.nr = -1; dev->tx_fifo_depth = 32; @@ -106,6 +107,10 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &dev->sda_hold_time); + id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); + if (id && id->driver_data) + dev->accessor_flags |= (u32)id->driver_data; + return 0; } @@ -116,7 +121,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT3433", 0 }, { "80860F41", 0 }, { "808622C1", 0 }, - { "AMD0010", 0 }, + { "AMD0010", ACCESS_INTR_MASK }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); -- cgit v0.10.2 From e79e72c5a242fa21c971cfb40017f1039daf4d77 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 10 Dec 2015 13:48:43 +0200 Subject: i2c: designware: Keep pm_runtime_enable/_disable calls in sync On an hardware shared I2C bus (certain Intel Baytrail SoC platforms) the runtime PM disable depth keeps increasing over repeated modprobe/rmmod cycle because pm_runtime_disable() is called without checking should it be disabled already because of bus sharing. This hasn't made any other harm than dev->power.disable_depth keeps increasing but keep it sync by calling pm_runtime_disable() only when runtime PM is not disabled. Reported-by: Wolfram Sang Signed-off-by: Jarkko Nikula Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index f03ea71..6b00061c 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -245,12 +245,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) } r = i2c_dw_probe(dev); - if (r) { + if (r && !dev->pm_runtime_disabled) pm_runtime_disable(&pdev->dev); - return r; - } - return 0; + return r; } static int dw_i2c_plat_remove(struct platform_device *pdev) @@ -265,7 +263,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev) pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); + if (!dev->pm_runtime_disabled) + pm_runtime_disable(&pdev->dev); return 0; } -- cgit v0.10.2 From 352d52e2442f42539c76d8a13d795ccab7079b26 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Fri, 20 Nov 2015 11:42:22 +0000 Subject: ASoC: es8328: Fix shifts for mixer switches These are all off by one; the playback and bypass switches are the top two bits of the registers, which are at shifts 7 and 6 not 8 and 7. Signed-off-by: John Keeping Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c index c4c64e21..afa6c5d 100644 --- a/sound/soc/codecs/es8328.c +++ b/sound/soc/codecs/es8328.c @@ -214,18 +214,18 @@ static const struct snd_kcontrol_new es8328_right_line_controls = /* Left Mixer */ static const struct snd_kcontrol_new es8328_left_mixer_controls[] = { - SOC_DAPM_SINGLE("Playback Switch", ES8328_DACCONTROL17, 8, 1, 0), - SOC_DAPM_SINGLE("Left Bypass Switch", ES8328_DACCONTROL17, 7, 1, 0), - SOC_DAPM_SINGLE("Right Playback Switch", ES8328_DACCONTROL18, 8, 1, 0), - SOC_DAPM_SINGLE("Right Bypass Switch", ES8328_DACCONTROL18, 7, 1, 0), + SOC_DAPM_SINGLE("Playback Switch", ES8328_DACCONTROL17, 7, 1, 0), + SOC_DAPM_SINGLE("Left Bypass Switch", ES8328_DACCONTROL17, 6, 1, 0), + SOC_DAPM_SINGLE("Right Playback Switch", ES8328_DACCONTROL18, 7, 1, 0), + SOC_DAPM_SINGLE("Right Bypass Switch", ES8328_DACCONTROL18, 6, 1, 0), }; /* Right Mixer */ static const struct snd_kcontrol_new es8328_right_mixer_controls[] = { - SOC_DAPM_SINGLE("Left Playback Switch", ES8328_DACCONTROL19, 8, 1, 0), - SOC_DAPM_SINGLE("Left Bypass Switch", ES8328_DACCONTROL19, 7, 1, 0), - SOC_DAPM_SINGLE("Playback Switch", ES8328_DACCONTROL20, 8, 1, 0), - SOC_DAPM_SINGLE("Right Bypass Switch", ES8328_DACCONTROL20, 7, 1, 0), + SOC_DAPM_SINGLE("Left Playback Switch", ES8328_DACCONTROL19, 7, 1, 0), + SOC_DAPM_SINGLE("Left Bypass Switch", ES8328_DACCONTROL19, 6, 1, 0), + SOC_DAPM_SINGLE("Playback Switch", ES8328_DACCONTROL20, 7, 1, 0), + SOC_DAPM_SINGLE("Right Bypass Switch", ES8328_DACCONTROL20, 6, 1, 0), }; static const char * const es8328_pga_sel[] = { -- cgit v0.10.2 From 1ea5998afe903384ddc16391d4c023cd4c867bea Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Fri, 11 Dec 2015 11:27:08 +0000 Subject: ASoC: wm8974: set cache type for regmap Attempting to use this codec driver triggers a BUG() in regcache_sync() since no cache type is set. The register map of this device is fairly small and has few holes so a flat cache is suitable. Signed-off-by: Mans Rullgard Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index 0a60677..4c29bd2 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -574,6 +574,7 @@ static const struct regmap_config wm8974_regmap = { .max_register = WM8974_MONOMIX, .reg_defaults = wm8974_reg_defaults, .num_reg_defaults = ARRAY_SIZE(wm8974_reg_defaults), + .cache_type = REGCACHE_FLAT, }; static int wm8974_probe(struct snd_soc_codec *codec) -- cgit v0.10.2 From 5042f936c6810d0e7153cc9e1794c6998590a930 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Fri, 11 Dec 2015 09:45:33 +0100 Subject: ASoC: rockchip: spdif: Set transmit data level to 16 samples Explicitly set the transmit data level on the transceiver to 16 samples rather then the default 0. This matches both the level set in the vendor kernel and the (seemingly very similar) i2s engine. This fixes audio glitches when playing back at 192k rate. At the same time, fix a trivial typo in the TDL mask definition Signed-off-by: Sjoerd Simons Signed-off-by: Mark Brown diff --git a/sound/soc/rockchip/rockchip_spdif.c b/sound/soc/rockchip/rockchip_spdif.c index a38a302..bb09a07 100644 --- a/sound/soc/rockchip/rockchip_spdif.c +++ b/sound/soc/rockchip/rockchip_spdif.c @@ -152,8 +152,10 @@ static int rk_spdif_trigger(struct snd_pcm_substream *substream, case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ret = regmap_update_bits(spdif->regmap, SPDIF_DMACR, - SPDIF_DMACR_TDE_ENABLE, - SPDIF_DMACR_TDE_ENABLE); + SPDIF_DMACR_TDE_ENABLE | + SPDIF_DMACR_TDL_MASK, + SPDIF_DMACR_TDE_ENABLE | + SPDIF_DMACR_TDL(16)); if (ret != 0) return ret; diff --git a/sound/soc/rockchip/rockchip_spdif.h b/sound/soc/rockchip/rockchip_spdif.h index 07f86a2..9c24dbc 100644 --- a/sound/soc/rockchip/rockchip_spdif.h +++ b/sound/soc/rockchip/rockchip_spdif.h @@ -42,7 +42,7 @@ #define SPDIF_DMACR_TDL_SHIFT 0 #define SPDIF_DMACR_TDL(x) ((x) << SPDIF_DMACR_TDL_SHIFT) -#define SPDIF_DMACR_TDL_MASK (0x1f << SDPIF_DMACR_TDL_SHIFT) +#define SPDIF_DMACR_TDL_MASK (0x1f << SPDIF_DMACR_TDL_SHIFT) /* * XFER -- cgit v0.10.2 From fd18ab89166ab004d40f417ae1d6f5dfeecff8ee Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Sat, 12 Dec 2015 14:24:26 -0800 Subject: Input: sun4i-lradc-keys - fix typo in binding documentation Trivial typo fix ("mut" -> "must") in the sunxi LRADC-keys binding documentation. Signed-off-by: Karsten Merker Acked-by: Rob Herring Acked-by: Chen-Yu Tsai Signed-off-by: Dmitry Torokhov diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt index b9c32f6..4357e49 100644 --- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -12,7 +12,7 @@ Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys": Required subnode-properties: - label: Descriptive name of the key. - linux,code: Keycode to emit. - - channel: Channel this key is attached to, mut be 0 or 1. + - channel: Channel this key is attached to, must be 0 or 1. - voltage: Voltage in µV at lradc input when this key is pressed. Example: -- cgit v0.10.2 From ef22d1604c622d24ded69f40d40c3c6d83f71156 Mon Sep 17 00:00:00 2001 From: Bhuvanchandra DV Date: Thu, 10 Dec 2015 11:25:30 +0530 Subject: spi-fsl-dspi: Fix CTAR Register access DSPI instances in Vybrid have a different amount of chip selects and CTARs (Clock and transfer Attributes Register). In case of DSPI1 we only have 2 CTAR registers and 4 CS. In present driver implementation CTAR offset is derived from CS instance which will lead to out of bound access if chip select instance is greater than CTAR register instance, hence use single CTAR0 register for all CS instances. Since we write the CTAR register anyway before each access, there is no value in using the additional CTAR registers. Also one should not program a value in CTAS for a CTAR register that is not present, hence configure CTAS to use CTAR0. Signed-off-by: Bhuvanchandra DV Acked-by: Stefan Agner Signed-off-by: Mark Brown diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 59a1143..39412c9 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -167,7 +167,7 @@ static inline int is_double_byte_mode(struct fsl_dspi *dspi) { unsigned int val; - regmap_read(dspi->regmap, SPI_CTAR(dspi->cs), &val); + regmap_read(dspi->regmap, SPI_CTAR(0), &val); return ((val & SPI_FRAME_BITS_MASK) == SPI_FRAME_BITS(8)) ? 0 : 1; } @@ -257,7 +257,7 @@ static u32 dspi_data_to_pushr(struct fsl_dspi *dspi, int tx_word) return SPI_PUSHR_TXDATA(d16) | SPI_PUSHR_PCS(dspi->cs) | - SPI_PUSHR_CTAS(dspi->cs) | + SPI_PUSHR_CTAS(0) | SPI_PUSHR_CONT; } @@ -290,7 +290,7 @@ static int dspi_eoq_write(struct fsl_dspi *dspi) */ if (tx_word && (dspi->len == 1)) { dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM; - regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs), + regmap_update_bits(dspi->regmap, SPI_CTAR(0), SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8)); tx_word = 0; } @@ -339,7 +339,7 @@ static int dspi_tcfq_write(struct fsl_dspi *dspi) if (tx_word && (dspi->len == 1)) { dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM; - regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs), + regmap_update_bits(dspi->regmap, SPI_CTAR(0), SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8)); tx_word = 0; } @@ -407,7 +407,7 @@ static int dspi_transfer_one_message(struct spi_master *master, regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF, SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF); - regmap_write(dspi->regmap, SPI_CTAR(dspi->cs), + regmap_write(dspi->regmap, SPI_CTAR(0), dspi->cur_chip->ctar_val); trans_mode = dspi->devtype_data->trans_mode; @@ -566,7 +566,7 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id) if (!dspi->len) { if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM) { regmap_update_bits(dspi->regmap, - SPI_CTAR(dspi->cs), + SPI_CTAR(0), SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(16)); dspi->dataflags &= ~TRAN_STATE_WORD_ODD_NUM; -- cgit v0.10.2 From 7be047e035dc4fb1536f1694cbb932f881533ab2 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 19 Oct 2015 13:37:55 +0900 Subject: serial: 8250_uniphier: fix dl_read and dl_write functions The register offset must be shifted by regshift, otherwise the baudrate is not set. I missed the issue probably because the divisor register was already set by the boot loader. Fixes: 1a8d2903cb6a ("serial: 8250_uniphier: add UniPhier serial driver") Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index d11621e..245edbb 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -115,12 +115,16 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value) */ static int uniphier_serial_dl_read(struct uart_8250_port *up) { - return readl(up->port.membase + UNIPHIER_UART_DLR); + int offset = UNIPHIER_UART_DLR << up->port.regshift; + + return readl(up->port.membase + offset); } static void uniphier_serial_dl_write(struct uart_8250_port *up, int value) { - writel(value, up->port.membase + UNIPHIER_UART_DLR); + int offset = UNIPHIER_UART_DLR << up->port.regshift; + + writel(value, up->port.membase + offset); } static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port, -- cgit v0.10.2 From ac8f3bf8832a405cc6e4dccb1d26d5cb2994d234 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 27 Nov 2015 13:59:20 -0500 Subject: n_tty: Fix poll() after buffer-limited eof push read commit 40d5e0905a03 ("n_tty: Fix EOF push handling") fixed EOF push for reads. However, that approach still allows a condition mismatch between poll() and read(), where poll() returns POLLIN but read() blocks. This state can happen when a previous read() returned because the user buffer was full and the next character was an EOF not at the beginning of the line. While the next read() will properly identify the condition and advance the read buffer tail without improperly indicating an EOF file condition (ie., read() will not mistakenly return 0), poll() will mistakenly indicate POLLIN. Although a possible solution would be to peek at the input buffer in n_tty_poll(), the better solution in this patch is to eat the EOF during the previous read() (ie., fix the problem by eliminating the condition). The current canon line buffer copy limits the scan for next end-of-line to the smaller of either, a. the remaining user buffer size b. completed lines in the input buffer When the remaining user buffer size is exactly one less than the end-of-line marked by EOF push, the EOF is not scanned nor skipped but left for subsequent reads. In the example below, the scan index 'eol' has stopped at the EOF because it is past the scan limit of 5 (not because it has found the next set bit in read_flags) user buffer [*nr = 5] _ _ _ _ _ read_flags 0 0 0 0 0 1 input buffer h e l l o [EOF] ^ ^ / / tail eol result: found = 0, tail += 5, *nr += 5 Instead, allow the scan to peek ahead 1 byte (while still limiting the scan to completed lines in the input buffer). For the example above, result: found = 1, tail += 6, *nr += 5 Because the scan limit is now bumped +1 byte, when the scan is completed, the tail advance and the user buffer copy limit is re-clamped to *nr when EOF is _not_ found. Fixes: 40d5e0905a03 ("n_tty: Fix EOF push handling") Cc: # 3.12+ Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index ed77614..e49c2bce 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2054,13 +2054,13 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, size_t eol; size_t tail; int ret, found = 0; - bool eof_push = 0; /* N.B. avoid overrun if nr == 0 */ - n = min(*nr, smp_load_acquire(&ldata->canon_head) - ldata->read_tail); - if (!n) + if (!*nr) return 0; + n = min(*nr + 1, smp_load_acquire(&ldata->canon_head) - ldata->read_tail); + tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); size = min_t(size_t, tail + n, N_TTY_BUF_SIZE); @@ -2081,12 +2081,11 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, n = eol - tail; if (n > N_TTY_BUF_SIZE) n += N_TTY_BUF_SIZE; - n += found; - c = n; + c = n + found; - if (found && !ldata->push && read_buf(ldata, eol) == __DISABLED_CHAR) { - n--; - eof_push = !n && ldata->read_tail != ldata->line_start; + if (!found || read_buf(ldata, eol) != __DISABLED_CHAR) { + c = min(*nr, c); + n = c; } n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu size:%zu more:%zu\n", @@ -2116,7 +2115,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, ldata->push = 0; tty_audit_push(tty); } - return eof_push ? -EAGAIN : 0; + return 0; } extern ssize_t redirected_tty_write(struct file *, const char __user *, @@ -2273,10 +2272,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, if (ldata->icanon && !L_EXTPROC(tty)) { retval = canon_copy_from_read_buf(tty, &b, &nr); - if (retval == -EAGAIN) { - retval = 0; - continue; - } else if (retval) + if (retval) break; } else { int uncopied; -- cgit v0.10.2 From d09959e7529451a1c302197fb1396ed5b835f6d3 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 4 Dec 2015 15:21:19 +0100 Subject: serial: sh-sci: Fix length of scatterlist This patch fixes an issue that the "length" of scatterlist should be set using sg_dma_len(). Otherwise, a dmaengine driver cannot work correctly if CONFIG_NEED_SG_DMA_LENGTH=y. Fixes: 7b39d90184 (serial: sh-sci: Fix NULL pointer dereference if HIGHMEM is enabled) Signed-off-by: Yoshihiro Shimoda Signed-off-by: Geert Uytterhoeven Acked-by: Simon Horman Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 960e50a..51c7507 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1437,7 +1437,7 @@ static void sci_request_dma(struct uart_port *port) sg_init_table(sg, 1); s->rx_buf[i] = buf; sg_dma_address(sg) = dma; - sg->length = s->buf_len_rx; + sg_dma_len(sg) = s->buf_len_rx; buf += s->buf_len_rx; dma += s->buf_len_rx; -- cgit v0.10.2 From e1dd3bef6d03c908b173259229b96074d57fccc8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 27 Nov 2015 11:13:48 +0100 Subject: serial: earlycon: Add missing spinlock initialization If an earlycon console driver needs to acquire the uart_port.lock spinlock for serial console output, and CONFIG_DEBUG_SPINLOCK=y: BUG: spinlock bad magic on CPU#0, swapper/0 lock: sci_ports+0x0/0x3480, .magic: 00000000, .owner: /-1, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.0-rc2-koelsch-g62ea5edf143bb1d0-dirty #2083 Hardware name: Generic R8A7791 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x70/0x8c) [] (dump_stack) from [] (do_raw_spin_lock+0x20/0x190) [] (do_raw_spin_lock) from [] (serial_console_write+0x4c/0x130) [] (serial_console_write) from [] (call_console_drivers.constprop.13+0xc8/0xec) [] (call_console_drivers.constprop.13) from [] (console_unlock+0x354/0x440) [] (console_unlock) from [] (register_console+0x2a0/0x394) [] (register_console) from [] (of_setup_earlycon+0x90/0xa4) [] (of_setup_earlycon) from [] (setup_of_earlycon+0x118/0x13c) [] (setup_of_earlycon) from [] (do_early_param+0x64/0xb4) [] (do_early_param) from [] (parse_args+0x254/0x350) [] (parse_args) from [] (parse_early_options+0x2c/0x3c) [] (parse_early_options) from [] (parse_early_param+0x2c/0x40) [] (parse_early_param) from [] (setup_arch+0x520/0xaf0) [] (setup_arch) from [] (start_kernel+0x94/0x370) [] (start_kernel) from [<40008090>] (0x40008090) Initialize the spinlock in of_setup_earlycon() and register_earlycon(), to fix this for both DT-based and legacy earlycon. If the driver would reinitialize the spinlock again, this is harmless, as it's allowed to reinitialize an unlocked spinlock. Alternatives are: - Drivers having an early_serial_console_write() that only performs the core functionality of serial_console_write(), without acquiring the lock (which may be unsafe, depending on the hardware), - Drivers initializing the spinlock in their private earlycon setup functions. As uart_port is owned by generic serial_core, and uart_port.lock is initialized by uart_add_one_port() for the normal case, this can better be handled in the earlycon core. Signed-off-by: Geert Uytterhoeven Reviewed-by: Peter Hurley Reported-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index f096360..b5b2f2b 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -115,6 +115,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match) if (buf && !parse_options(&early_console_dev, buf)) buf = NULL; + spin_lock_init(&port->lock); port->uartclk = BASE_BAUD * 16; if (port->mapbase) port->membase = earlycon_map(port->mapbase, 64); @@ -202,6 +203,7 @@ int __init of_setup_earlycon(unsigned long addr, int err; struct uart_port *port = &early_console_dev.port; + spin_lock_init(&port->lock); port->iotype = UPIO_MEM; port->mapbase = addr; port->uartclk = BASE_BAUD * 16; -- cgit v0.10.2 From 9ce119f318ba1a07c29149301f1544b6c4bea52a Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 27 Nov 2015 14:25:08 -0500 Subject: tty: Fix GPF in flush_to_ldisc() A line discipline which does not define a receive_buf() method can can cause a GPF if data is ever received [1]. Oddly, this was known to the author of n_tracesink in 2011, but never fixed. [1] GPF report BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 3752d067 PUD 37a7b067 PMD 0 Oops: 0010 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 148 Comm: kworker/u10:2 Not tainted 4.4.0-rc2+ #51 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events_unbound flush_to_ldisc task: ffff88006da94440 ti: ffff88006db60000 task.ti: ffff88006db60000 RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff88006db67b50 EFLAGS: 00010246 RAX: 0000000000000102 RBX: ffff88003ab32f88 RCX: 0000000000000102 RDX: 0000000000000000 RSI: ffff88003ab330a6 RDI: ffff88003aabd388 RBP: ffff88006db67c48 R08: ffff88003ab32f9c R09: ffff88003ab31fb0 R10: ffff88003ab32fa8 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff88006db67c20 R14: ffffffff863df820 R15: ffff88003ab31fb8 FS: 0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000037938000 CR4: 00000000000006e0 Stack: ffffffff829f46f1 ffff88006da94bf8 ffff88006da94bf8 0000000000000000 ffff88003ab31fb0 ffff88003aabd438 ffff88003ab31ff8 ffff88006430fd90 ffff88003ab32f9c ffffed0007557a87 1ffff1000db6cf78 ffff88003ab32078 Call Trace: [] process_one_work+0x8f1/0x17a0 kernel/workqueue.c:2030 [] worker_thread+0xd4/0x1180 kernel/workqueue.c:2162 [] kthread+0x1cf/0x270 drivers/block/aoe/aoecmd.c:1302 [] ret_from_fork+0x3f/0x70 arch/x86/entry/entry_64.S:468 Code: Bad RIP value. RIP [< (null)>] (null) RSP CR2: 0000000000000000 ---[ end trace a587f8947e54d6ea ]--- Reported-by: Dmitry Vyukov Cc: Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 9a479e6..3cd31e0 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -450,7 +450,7 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count) count = disc->ops->receive_buf2(tty, p, f, count); else { count = min_t(int, count, tty->receive_room); - if (count) + if (count && disc->ops->receive_buf) disc->ops->receive_buf(tty, p, f, count); } return count; -- cgit v0.10.2 From 628a2918afe42fae2f90749ad3721853fd06b262 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 3 Dec 2015 17:26:59 +0100 Subject: iwlwifi: separate firmware version for 7260 devices The 7260 devices aren't going to be updated for completely new firmware versions any more (only bugfixes), and haven't been since API version 17. Encode that in the data structures to avoid trying to load FW images that will never exist. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c index bf88ec3..d9a4aee 100644 --- a/drivers/net/wireless/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/iwlwifi/iwl-7000.c @@ -69,13 +69,19 @@ #include "iwl-agn-hw.h" /* Highest firmware API version supported */ -#define IWL7260_UCODE_API_MAX 19 +#define IWL7260_UCODE_API_MAX 17 +#define IWL7265_UCODE_API_MAX 19 +#define IWL7265D_UCODE_API_MAX 19 /* Oldest version we won't warn about */ #define IWL7260_UCODE_API_OK 13 +#define IWL7265_UCODE_API_OK 13 +#define IWL7265D_UCODE_API_OK 13 /* Lowest firmware API version supported */ #define IWL7260_UCODE_API_MIN 13 +#define IWL7265_UCODE_API_MIN 13 +#define IWL7265D_UCODE_API_MIN 13 /* NVM versions */ #define IWL7260_NVM_VERSION 0x0a1d @@ -149,10 +155,7 @@ static const struct iwl_ht_params iwl7000_ht_params = { .ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ), }; -#define IWL_DEVICE_7000 \ - .ucode_api_max = IWL7260_UCODE_API_MAX, \ - .ucode_api_ok = IWL7260_UCODE_API_OK, \ - .ucode_api_min = IWL7260_UCODE_API_MIN, \ +#define IWL_DEVICE_7000_COMMON \ .device_family = IWL_DEVICE_FAMILY_7000, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -163,6 +166,24 @@ static const struct iwl_ht_params iwl7000_ht_params = { .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \ .dccm_offset = IWL7000_DCCM_OFFSET +#define IWL_DEVICE_7000 \ + IWL_DEVICE_7000_COMMON, \ + .ucode_api_max = IWL7260_UCODE_API_MAX, \ + .ucode_api_ok = IWL7260_UCODE_API_OK, \ + .ucode_api_min = IWL7260_UCODE_API_MIN + +#define IWL_DEVICE_7005 \ + IWL_DEVICE_7000_COMMON, \ + .ucode_api_max = IWL7265_UCODE_API_MAX, \ + .ucode_api_ok = IWL7265_UCODE_API_OK, \ + .ucode_api_min = IWL7265_UCODE_API_MIN + +#define IWL_DEVICE_7005D \ + IWL_DEVICE_7000_COMMON, \ + .ucode_api_max = IWL7265D_UCODE_API_MAX, \ + .ucode_api_ok = IWL7265D_UCODE_API_OK, \ + .ucode_api_min = IWL7265D_UCODE_API_MIN + const struct iwl_cfg iwl7260_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 7260", .fw_name_pre = IWL7260_FW_PRE, @@ -266,7 +287,7 @@ static const struct iwl_ht_params iwl7265_ht_params = { const struct iwl_cfg iwl3165_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 3165", .fw_name_pre = IWL7265D_FW_PRE, - IWL_DEVICE_7000, + IWL_DEVICE_7005D, .ht_params = &iwl7000_ht_params, .nvm_ver = IWL3165_NVM_VERSION, .nvm_calib_ver = IWL3165_TX_POWER_VERSION, @@ -277,7 +298,7 @@ const struct iwl_cfg iwl3165_2ac_cfg = { const struct iwl_cfg iwl7265_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 7265", .fw_name_pre = IWL7265_FW_PRE, - IWL_DEVICE_7000, + IWL_DEVICE_7005, .ht_params = &iwl7265_ht_params, .nvm_ver = IWL7265_NVM_VERSION, .nvm_calib_ver = IWL7265_TX_POWER_VERSION, @@ -288,7 +309,7 @@ const struct iwl_cfg iwl7265_2ac_cfg = { const struct iwl_cfg iwl7265_2n_cfg = { .name = "Intel(R) Dual Band Wireless N 7265", .fw_name_pre = IWL7265_FW_PRE, - IWL_DEVICE_7000, + IWL_DEVICE_7005, .ht_params = &iwl7265_ht_params, .nvm_ver = IWL7265_NVM_VERSION, .nvm_calib_ver = IWL7265_TX_POWER_VERSION, @@ -299,7 +320,7 @@ const struct iwl_cfg iwl7265_2n_cfg = { const struct iwl_cfg iwl7265_n_cfg = { .name = "Intel(R) Wireless N 7265", .fw_name_pre = IWL7265_FW_PRE, - IWL_DEVICE_7000, + IWL_DEVICE_7005, .ht_params = &iwl7265_ht_params, .nvm_ver = IWL7265_NVM_VERSION, .nvm_calib_ver = IWL7265_TX_POWER_VERSION, @@ -310,7 +331,7 @@ const struct iwl_cfg iwl7265_n_cfg = { const struct iwl_cfg iwl7265d_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 7265", .fw_name_pre = IWL7265D_FW_PRE, - IWL_DEVICE_7000, + IWL_DEVICE_7005D, .ht_params = &iwl7265_ht_params, .nvm_ver = IWL7265D_NVM_VERSION, .nvm_calib_ver = IWL7265_TX_POWER_VERSION, @@ -321,7 +342,7 @@ const struct iwl_cfg iwl7265d_2ac_cfg = { const struct iwl_cfg iwl7265d_2n_cfg = { .name = "Intel(R) Dual Band Wireless N 7265", .fw_name_pre = IWL7265D_FW_PRE, - IWL_DEVICE_7000, + IWL_DEVICE_7005D, .ht_params = &iwl7265_ht_params, .nvm_ver = IWL7265D_NVM_VERSION, .nvm_calib_ver = IWL7265_TX_POWER_VERSION, @@ -332,7 +353,7 @@ const struct iwl_cfg iwl7265d_2n_cfg = { const struct iwl_cfg iwl7265d_n_cfg = { .name = "Intel(R) Wireless N 7265", .fw_name_pre = IWL7265D_FW_PRE, - IWL_DEVICE_7000, + IWL_DEVICE_7005D, .ht_params = &iwl7265_ht_params, .nvm_ver = IWL7265D_NVM_VERSION, .nvm_calib_ver = IWL7265_TX_POWER_VERSION, @@ -342,5 +363,5 @@ const struct iwl_cfg iwl7265d_n_cfg = { MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); -MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); -MODULE_FIRMWARE(IWL7265D_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); +MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7265_UCODE_API_OK)); +MODULE_FIRMWARE(IWL7265D_MODULE_FIRMWARE(IWL7265D_UCODE_API_OK)); -- cgit v0.10.2 From 4585436091cd812b1165aab71bd4847ea1cb08ec Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Dec 2015 09:06:25 +0100 Subject: iwlwifi: mvm: protect RCU dereference in iwl_mvm_get_key_sta_id Properly protect the RCU dereference in iwl_mvm_get_key_sta_id() when coming from iwl_mvm_update_tkip_key() which cannot hold the mvm->mutex by moving the call into the RCU critical section. Modify the check to use rcu_dereference_check() to permit this. Fixes: 9513c5e18a0d ("iwlwifi: mvm: Avoid dereferencing sta if it was already flushed") Reported-by: Laura Abbott Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 354acbd..2b976b1 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -1222,8 +1222,8 @@ static u8 iwl_mvm_get_key_sta_id(struct iwl_mvm *mvm, mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { u8 sta_id = mvmvif->ap_sta_id; - sta = rcu_dereference_protected(mvm->fw_id_to_mac_id[sta_id], - lockdep_is_held(&mvm->mutex)); + sta = rcu_dereference_check(mvm->fw_id_to_mac_id[sta_id], + lockdep_is_held(&mvm->mutex)); /* * It is possible that the 'sta' parameter is NULL, * for example when a GTK is removed - the sta_id will then @@ -1590,14 +1590,15 @@ void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, u16 *phase1key) { struct iwl_mvm_sta *mvm_sta; - u8 sta_id = iwl_mvm_get_key_sta_id(mvm, vif, sta); + u8 sta_id; bool mcast = !(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE); - if (WARN_ON_ONCE(sta_id == IWL_MVM_STATION_COUNT)) - return; - rcu_read_lock(); + sta_id = iwl_mvm_get_key_sta_id(mvm, vif, sta); + if (WARN_ON_ONCE(sta_id == IWL_MVM_STATION_COUNT)) + goto unlock; + if (!sta) { sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); if (WARN_ON(IS_ERR_OR_NULL(sta))) { @@ -1609,6 +1610,8 @@ void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, mvm_sta = iwl_mvm_sta_from_mac80211(sta); iwl_mvm_send_sta_key(mvm, mvm_sta, keyconf, mcast, iv32, phase1key, CMD_ASYNC, keyconf->hw_key_idx); + + unlock: rcu_read_unlock(); } -- cgit v0.10.2 From 42e3121d90f42e57f6dbd6083dff2f57b3ec7daa Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Sun, 13 Dec 2015 20:49:58 +0200 Subject: ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly AudioQuest DragonFly DAC reports a volume control range of 0..50 (0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which is obviously incorrect and would cause software using the dB information in e.g. volume sliders to have a massive volume difference in 100..102% range. Commit 2d1cb7f658fb ("ALSA: usb-audio: add dB range mapping for some devices") added a dB range mapping for it with range 0..50 dB. However, the actual volume mapping seems to be neither linear volume nor linear dB scale, but instead quite close to the cubic mapping e.g. alsamixer uses, with a range of approx. -53...0 dB. Replace the previous quirk with a custom dB mapping based on some basic output measurements, using a 10-item range TLV (which will still fit in alsa-lib MAX_TLV_RANGE_SIZE). Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the range is 0..50, so if this gets fixed/changed in later HW revisions it will no longer be applied. v2: incorporated Takashi Iwai's suggestion for the quirk application method Signed-off-by: Anssi Hannula Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index f494dce..4f85757 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1354,6 +1354,8 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, } } + snd_usb_mixer_fu_apply_quirk(state->mixer, cval, unitid, kctl); + range = (cval->max - cval->min) / cval->res; /* * Are there devices with volume range more than 255? I use a bit more diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index 6a803ef..ddca654 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -348,13 +348,6 @@ static struct usbmix_name_map bose_companion5_map[] = { { 0 } /* terminator */ }; -/* Dragonfly DAC 1.2, the dB conversion factor is 1 instead of 256 */ -static struct usbmix_dB_map dragonfly_1_2_dB = {0, 5000}; -static struct usbmix_name_map dragonfly_1_2_map[] = { - { 7, NULL, .dB = &dragonfly_1_2_dB }, - { 0 } /* terminator */ -}; - /* * Control map entries */ @@ -470,11 +463,6 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x05a7, 0x1020), .map = bose_companion5_map, }, - { - /* Dragonfly DAC 1.2 */ - .id = USB_ID(0x21b4, 0x0081), - .map = dragonfly_1_2_map, - }, { 0 } /* terminator */ }; diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index fe91184..0ce888d 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "usbaudio.h" #include "mixer.h" @@ -1825,3 +1826,39 @@ void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer, } } +static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer, + struct snd_kcontrol *kctl) +{ + /* Approximation using 10 ranges based on output measurement on hw v1.2. + * This seems close to the cubic mapping e.g. alsamixer uses. */ + static const DECLARE_TLV_DB_RANGE(scale, + 0, 1, TLV_DB_MINMAX_ITEM(-5300, -4970), + 2, 5, TLV_DB_MINMAX_ITEM(-4710, -4160), + 6, 7, TLV_DB_MINMAX_ITEM(-3884, -3710), + 8, 14, TLV_DB_MINMAX_ITEM(-3443, -2560), + 15, 16, TLV_DB_MINMAX_ITEM(-2475, -2324), + 17, 19, TLV_DB_MINMAX_ITEM(-2228, -2031), + 20, 26, TLV_DB_MINMAX_ITEM(-1910, -1393), + 27, 31, TLV_DB_MINMAX_ITEM(-1322, -1032), + 32, 40, TLV_DB_MINMAX_ITEM(-968, -490), + 41, 50, TLV_DB_MINMAX_ITEM(-441, 0), + ); + + usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk\n"); + kctl->tlv.p = scale; + kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ; + kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK; +} + +void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer, + struct usb_mixer_elem_info *cval, int unitid, + struct snd_kcontrol *kctl) +{ + switch (mixer->chip->usb_id) { + case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */ + if (unitid == 7 && cval->min == 0 && cval->max == 50) + snd_dragonfly_quirk_db_scale(mixer, kctl); + break; + } +} + diff --git a/sound/usb/mixer_quirks.h b/sound/usb/mixer_quirks.h index bdbfab0..177c329 100644 --- a/sound/usb/mixer_quirks.h +++ b/sound/usb/mixer_quirks.h @@ -9,5 +9,9 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer, int unitid); +void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer, + struct usb_mixer_elem_info *cval, int unitid, + struct snd_kcontrol *kctl); + #endif /* SND_USB_MIXER_QUIRKS_H */ -- cgit v0.10.2 From 12a6116e66695a728bcb9616416c508ce9c051a1 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Sun, 13 Dec 2015 20:49:59 +0200 Subject: ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFly Avoid getting sample rate on AudioQuest DragonFly as it is unsupported and causes noisy "cannot get freq at ep 0x1" messages when playback starts. Signed-off-by: Anssi Hannula Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 7016ad8..b6c0c8e 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1125,6 +1125,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) case USB_ID(0x045E, 0x0779): /* MS Lifecam HD-3000 */ case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */ + case USB_ID(0x21B4, 0x0081): /* AudioQuest DragonFly */ return true; } return false; -- cgit v0.10.2 From 4c02cba18cc9de672a554ddda4f23dec8cb4b48e Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 19 Nov 2015 00:32:27 +0000 Subject: pinctrl: bcm2835: Fix initial value for direction_output Currently the provided initial value for bcm2835_gpio_direction_output has no effect. So fix this issue by changing the value before changing the GPIO direction. As a result we need to move the function below bcm2835_gpio_set. Suggested-by: Martin Sperl Signed-off-by: Stefan Wahren Acked-by: Eric Anholt Acked-by: Stephen Warren Fixes: e1b2dc70cd5b ("pinctrl: add bcm2835 driver") Signed-off-by: Linus Walleij diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index a1ea565..2e6ca69 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -342,12 +342,6 @@ static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset) return bcm2835_gpio_get_bit(pc, GPLEV0, offset); } -static int bcm2835_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - return pinctrl_gpio_direction_output(chip->base + offset); -} - static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); @@ -355,6 +349,13 @@ static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value) bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset); } +static int bcm2835_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + bcm2835_gpio_set(chip, offset, value); + return pinctrl_gpio_direction_output(chip->base + offset); +} + static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); -- cgit v0.10.2 From 20f36e0380a7e871a711d5e4e59d04d4948326b4 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Sat, 12 Dec 2015 19:25:55 -0500 Subject: xen/x86/pvh: Use HVM's flush_tlb_others op Using MMUEXT_TLB_FLUSH_MULTI doesn't buy us much since the hypervisor will likely perform same IPIs as would have the guest. More importantly, using MMUEXT_INVLPG_MULTI may not to invalidate the guest's address on remote CPU (when, for example, VCPU from another guest is running there). Signed-off-by: Boris Ostrovsky Suggested-by: Jan Beulich Signed-off-by: David Vrabel diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index ac161db..cb5e266 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2495,14 +2495,9 @@ void __init xen_init_mmu_ops(void) { x86_init.paging.pagetable_init = xen_pagetable_init; - /* Optimization - we can use the HVM one but it has no idea which - * VCPUs are descheduled - which means that it will needlessly IPI - * them. Xen knows so let it do the job. - */ - if (xen_feature(XENFEAT_auto_translated_physmap)) { - pv_mmu_ops.flush_tlb_others = xen_flush_tlb_others; + if (xen_feature(XENFEAT_auto_translated_physmap)) return; - } + pv_mmu_ops = xen_mmu_ops; memset(dummy_mapping, 0xff, PAGE_SIZE); -- cgit v0.10.2 From 13cbd906e89a1af42c586dcc4f42b311d23b7fd1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Dec 2015 14:27:32 -0800 Subject: MAINTAINERS: pinctrl: Add maintainers for pinctrl-single Otherwise we keep missing patches related to this driver. Cc: Haojian Zhuang Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij diff --git a/MAINTAINERS b/MAINTAINERS index 69c8a9c..0641285 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8379,6 +8379,14 @@ L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) S: Maintained F: drivers/pinctrl/samsung/ +PIN CONTROLLER - SINGLE +M: Tony Lindgren +M: Haojian Zhuang +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-omap@vger.kernel.org +S: Maintained +F: drivers/pinctrl/pinctrl-single.c + PIN CONTROLLER - ST SPEAR M: Viresh Kumar L: spear-devel@list.st.com -- cgit v0.10.2 From 7b5cc1a9c9f4096555345c365508d727149553fe Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 17 Nov 2015 16:11:36 +0100 Subject: iommu/amd: Do proper access checking before calling handle_mm_fault() The handle_mm_fault function expects the caller to do the access checks. Not doing so and calling the function with wrong permissions is a bug (catched by a BUG_ON). So fix this bug by adding proper access checking to the io page-fault code in the AMD IOMMUv2 driver. Reviewed-by: Jesse Barnes Acked-By: David Woodhouse Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c index d21d4ed..7caf2fa 100644 --- a/drivers/iommu/amd_iommu_v2.c +++ b/drivers/iommu/amd_iommu_v2.c @@ -494,6 +494,22 @@ static void handle_fault_error(struct fault *fault) } } +static bool access_error(struct vm_area_struct *vma, struct fault *fault) +{ + unsigned long requested = 0; + + if (fault->flags & PPR_FAULT_EXEC) + requested |= VM_EXEC; + + if (fault->flags & PPR_FAULT_READ) + requested |= VM_READ; + + if (fault->flags & PPR_FAULT_WRITE) + requested |= VM_WRITE; + + return (requested & ~vma->vm_flags) != 0; +} + static void do_fault(struct work_struct *work) { struct fault *fault = container_of(work, struct fault, work); @@ -516,8 +532,8 @@ static void do_fault(struct work_struct *work) goto out; } - if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) { - /* handle_mm_fault would BUG_ON() */ + /* Check if we have the right permissions on the vma */ + if (access_error(vma, fault)) { up_read(&mm->mmap_sem); handle_fault_error(fault); goto out; -- cgit v0.10.2 From 7f8312a3b31de5676144d9e75f2f2647c8b4b769 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 17 Nov 2015 16:11:39 +0100 Subject: iommu/vt-d: Do access checks before calling handle_mm_fault() Not doing so is a bug and might trigger a BUG_ON in handle_mm_fault(). So add the proper permission checks before calling into mm code. Reviewed-by: Jesse Barnes Acked-By: David Woodhouse Signed-off-by: Joerg Roedel diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c index c69e3f9..5046483 100644 --- a/drivers/iommu/intel-svm.c +++ b/drivers/iommu/intel-svm.c @@ -484,6 +484,23 @@ struct page_req_dsc { }; #define PRQ_RING_MASK ((0x1000 << PRQ_ORDER) - 0x10) + +static bool access_error(struct vm_area_struct *vma, struct page_req_dsc *req) +{ + unsigned long requested = 0; + + if (req->exe_req) + requested |= VM_EXEC; + + if (req->rd_req) + requested |= VM_READ; + + if (req->wr_req) + requested |= VM_WRITE; + + return (requested & ~vma->vm_flags) != 0; +} + static irqreturn_t prq_event_thread(int irq, void *d) { struct intel_iommu *iommu = d; @@ -539,6 +556,9 @@ static irqreturn_t prq_event_thread(int irq, void *d) if (!vma || address < vma->vm_start) goto invalid; + if (access_error(vma, req)) + goto invalid; + ret = handle_mm_fault(svm->mm, vma, address, req->wr_req ? FAULT_FLAG_WRITE : 0); if (ret & VM_FAULT_ERROR) -- cgit v0.10.2 From 81b1b9ca6d5ca5f3ce91c0095402def657cf5db3 Mon Sep 17 00:00:00 2001 From: Haozhong Zhang Date: Mon, 14 Dec 2015 23:13:38 +0800 Subject: KVM: VMX: Fix host initiated access to guest MSR_TSC_AUX The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by: Haozhong Zhang Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 6b56056..44976a5 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2803,7 +2803,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) msr_info->data = vcpu->arch.ia32_xss; break; case MSR_TSC_AUX: - if (!guest_cpuid_has_rdtscp(vcpu)) + if (!guest_cpuid_has_rdtscp(vcpu) && !msr_info->host_initiated) return 1; /* Otherwise falls through */ default: @@ -2909,7 +2909,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) clear_atomic_switch_msr(vmx, MSR_IA32_XSS); break; case MSR_TSC_AUX: - if (!guest_cpuid_has_rdtscp(vcpu)) + if (!guest_cpuid_has_rdtscp(vcpu) && !msr_info->host_initiated) return 1; /* Check reserved bit, higher 32 bits should be zero */ if ((data >> 32) != 0) -- cgit v0.10.2 From 13fdae1ae565f214f25753492783ce45cbf23532 Mon Sep 17 00:00:00 2001 From: Bai Ping Date: Wed, 9 Dec 2015 16:15:55 +0800 Subject: ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl The 'assigned-clock-parents' and 'assigned-clock-rates' list should corresponding to the 'assigned-clocks' property clock list. Signed-off-by: Bai Ping Fixes: ed339363de1b ("ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously") Cc: Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 8263fc1..d354d40 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -113,14 +113,14 @@ &clks { assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_PLL4_BYPASS>, - <&clks IMX6QDL_CLK_PLL4_POST_DIV>, <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_PLL4_POST_DIV>; assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>, <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - assigned-clock-rates = <0>, <0>, <24576000>; + assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>; }; &ecspi1 { -- cgit v0.10.2 From 3a35e470bc6bc4ce34c19c410ebbe4e3bbf0bafe Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Fri, 11 Dec 2015 14:22:04 +0100 Subject: ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Gateworks Ventana boards seem to need "RGMII-ID" (internal delay) PHY mode, instead of simple "RGMII", for their Marvell 88E1510 transceiver. Otherwise, the Ethernet MAC doesn't work with Marvell PHY driver (TX doesn't seem to work correctly). Tested on GW5400 rev. C. This bug affects ARM Fedora 23. Signed-off-by: Krzysztof Hałasa Acked-by: Tim Harvey Cc: Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 58adf17..a51834e 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -154,7 +154,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 7b31fdb..dc0cebf 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -94,7 +94,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 1b66328..18cd411 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -154,7 +154,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 7c51839..eea90f3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -155,7 +155,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 929e0b3..6c11a2a 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -145,7 +145,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; -- cgit v0.10.2 From c04017ea81dc1eccae87be7ac7b82b2972f9931f Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 15 Dec 2015 14:44:03 +0100 Subject: ALSA: hda - Fix headphone mic input on a few Dell ALC293 machines These laptops support both headphone, headset and mic modes for the 3.5mm jack. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1526330 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8dd2ac1..b745a72 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4606,6 +4606,7 @@ enum { ALC288_FIXUP_DISABLE_AAMIX, ALC292_FIXUP_DELL_E7X, ALC292_FIXUP_DISABLE_AAMIX, + ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK, ALC298_FIXUP_DELL1_MIC_NO_PRESENCE, ALC275_FIXUP_DELL_XPS, ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE, @@ -5169,6 +5170,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE }, + [ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_aamix, + .chained = true, + .chain_id = ALC293_FIXUP_DELL1_MIC_NO_PRESENCE + }, [ALC292_FIXUP_DELL_E7X] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_dell_xps13, @@ -5247,11 +5254,11 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x06c7, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x06d9, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x06da, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), - SND_PCI_QUIRK(0x1028, 0x06db, "Dell", ALC292_FIXUP_DISABLE_AAMIX), - SND_PCI_QUIRK(0x1028, 0x06dd, "Dell", ALC292_FIXUP_DISABLE_AAMIX), - SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC292_FIXUP_DISABLE_AAMIX), - SND_PCI_QUIRK(0x1028, 0x06df, "Dell", ALC292_FIXUP_DISABLE_AAMIX), - SND_PCI_QUIRK(0x1028, 0x06e0, "Dell", ALC292_FIXUP_DISABLE_AAMIX), + SND_PCI_QUIRK(0x1028, 0x06db, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK), + SND_PCI_QUIRK(0x1028, 0x06dd, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK), + SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK), + SND_PCI_QUIRK(0x1028, 0x06df, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK), + SND_PCI_QUIRK(0x1028, 0x06e0, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK), SND_PCI_QUIRK(0x1028, 0x0704, "Dell XPS 13", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), -- cgit v0.10.2 From 157f0b7f6c0cc0bc88647390006e959e267a0143 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 10 Dec 2015 23:30:43 +0100 Subject: ALSA: hda - Apply click noise workaround for Thinkpads generically It seems that a workaround for Thinkpad T440s crackling noise can be applied generically to all Thinkpad models: namely, disabling the default alc269 shutup callback. This patch moves it to the existing alc_fixup_tpt440_dock() while also replacing the rest code with another existing alc_fixup_disable_aamix(). It resulted in a good code reduction. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=958439 Reported-and-tested-by: Benjamin Poirier Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b745a72..531065e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4198,24 +4198,13 @@ static void alc_fixup_tpt440_dock(struct hda_codec *codec, struct alc_spec *spec = codec->spec; if (action == HDA_FIXUP_ACT_PRE_PROBE) { + spec->shutup = alc_no_shutup; /* reduce click noise */ spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; codec->power_save_node = 0; /* avoid click noises */ snd_hda_apply_pincfgs(codec, pincfgs); } } -/* additional fixup for Thinkpad T440s noise problem */ -static void alc_fixup_tpt440(struct hda_codec *codec, - const struct hda_fixup *fix, int action) -{ - struct alc_spec *spec = codec->spec; - - if (action == HDA_FIXUP_ACT_PRE_PROBE) { - spec->shutup = alc_no_shutup; /* reduce click noise */ - spec->gen.mixer_nid = 0; /* reduce background noise */ - } -} - static void alc_shutup_dell_xps13(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -5067,7 +5056,7 @@ static const struct hda_fixup alc269_fixups[] = { }, [ALC292_FIXUP_TPT440] = { .type = HDA_FIXUP_FUNC, - .v.func = alc_fixup_tpt440, + .v.func = alc_fixup_disable_aamix, .chained = true, .chain_id = ALC292_FIXUP_TPT440_DOCK, }, -- cgit v0.10.2 From 70a0976b0c0d90f4246d7e63359d796ec82b87d6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 15 Dec 2015 14:59:58 +0100 Subject: ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads Lenovo Thinkpads with Realtek codecs may still have some loud crackling noises at reboot/shutdown even though a few previous fixes have been applied. It's because the previous fix (disabling the default shutup callback) takes effect only at transition of the codec power state. Meanwhile, at reboot or shutdown, we don't take down the codec power as default, thus it triggers the same problem unless the codec is powered down casually by runtime PM. This patch tries to address the issue. It gives two things: - implement the separate reboot_notify hook to struct alc_spec, and call it optionally if defined. - turn off the codec to D3 for Thinkpad models via this new callback Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=958439 Reported-and-tested-by: Benjamin Poirier Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 531065e..5a79c7a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -111,6 +111,7 @@ struct alc_spec { void (*power_hook)(struct hda_codec *codec); #endif void (*shutup)(struct hda_codec *codec); + void (*reboot_notify)(struct hda_codec *codec); int init_amp; int codec_variant; /* flag for other variants */ @@ -773,6 +774,25 @@ static inline void alc_shutup(struct hda_codec *codec) snd_hda_shutup_pins(codec); } +static void alc_reboot_notify(struct hda_codec *codec) +{ + struct alc_spec *spec = codec->spec; + + if (spec && spec->reboot_notify) + spec->reboot_notify(codec); + else + alc_shutup(codec); +} + +/* power down codec to D3 at reboot/shutdown; set as reboot_notify ops */ +static void alc_d3_at_reboot(struct hda_codec *codec) +{ + snd_hda_codec_set_power_to_all(codec, codec->core.afg, AC_PWRST_D3); + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_POWER_STATE, AC_PWRST_D3); + msleep(10); +} + #define alc_free snd_hda_gen_free #ifdef CONFIG_PM @@ -818,7 +838,7 @@ static const struct hda_codec_ops alc_patch_ops = { .suspend = alc_suspend, .check_power_status = snd_hda_gen_check_power_status, #endif - .reboot_notify = alc_shutup, + .reboot_notify = alc_reboot_notify, }; @@ -4199,6 +4219,7 @@ static void alc_fixup_tpt440_dock(struct hda_codec *codec, if (action == HDA_FIXUP_ACT_PRE_PROBE) { spec->shutup = alc_no_shutup; /* reduce click noise */ + spec->reboot_notify = alc_d3_at_reboot; /* reduce noise */ spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; codec->power_save_node = 0; /* avoid click noises */ snd_hda_apply_pincfgs(codec, pincfgs); -- cgit v0.10.2 From b6903c0ed9f0bcbbe88f67f7ed43d1721cbc6235 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 10 Dec 2015 12:20:20 +0100 Subject: ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd Apply the same fixup for Thinkpad with dock to Thinkpad X1 Carbon 2nd, too. This reduces the annoying loud cracking noise problem, as well as the support of missing docking port. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=958439 Reported-and-tested-by: Benjamin Poirier Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5a79c7a..6c268da 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5375,6 +5375,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x17aa, 0x2218, "Thinkpad X1 Carbon 2nd", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2223, "ThinkPad T550", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2226, "ThinkPad X250", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2233, "Thinkpad", ALC293_FIXUP_LENOVO_SPK_NOISE), -- cgit v0.10.2 From 1b9b922a3a601b0c99a095ffafed61fcf6ebe0b7 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 15 Dec 2015 07:15:32 -0800 Subject: Btrfs: check for empty bitmap list in setup_cluster_bitmaps Dave Jones found a warning from kasan in setup_cluster_bitmaps() ================================================================== BUG: KASAN: stack-out-of-bounds in setup_cluster_bitmap+0xc4/0x5a0 at addr ffff88039bef6828 Read of size 8 by task nfsd/1009 page:ffffea000e6fbd80 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x8000000000000000() page dumped because: kasan: bad access detected CPU: 1 PID: 1009 Comm: nfsd Tainted: G W 4.4.0-rc3-backup-debug+ #1 ffff880065647b50 000000006bb712c2 ffff88039bef6640 ffffffffa680a43e 0000004559c00000 ffff88039bef66c8 ffffffffa62638d1 ffffffffa61121c0 ffff8803a5769de8 0000000000000296 ffff8803a5769df0 0000000000046280 Call Trace: [] dump_stack+0x4b/0x6d [] kasan_report_error+0x501/0x520 [] ? debug_show_all_locks+0x1e0/0x1e0 [] kasan_report+0x58/0x60 [] ? rb_last+0x10/0x40 [] ? setup_cluster_bitmap+0xc4/0x5a0 [] __asan_load8+0x5d/0x70 [] setup_cluster_bitmap+0xc4/0x5a0 [] ? setup_cluster_no_bitmap+0x6a/0x400 [] btrfs_find_space_cluster+0x4b6/0x640 [] ? btrfs_alloc_from_cluster+0x4e0/0x4e0 [] ? btrfs_return_cluster_to_free_space+0x9e/0xb0 [] ? _raw_spin_unlock+0x27/0x40 [] find_free_extent+0xba1/0x1520 Andrey noticed this was because we were doing list_first_entry on a list that might be empty. Rework the tests a bit so we don't do that. Signed-off-by: Chris Mason Reprorted-by: Andrey Ryabinin Reported-by: Dave Jones diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 0948d34..e6fc7d9 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2972,7 +2972,7 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, u64 cont1_bytes, u64 min_bytes) { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; - struct btrfs_free_space *entry; + struct btrfs_free_space *entry = NULL; int ret = -ENOSPC; u64 bitmap_offset = offset_to_bitmap(ctl, offset); @@ -2983,8 +2983,10 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, * The bitmap that covers offset won't be in the list unless offset * is just its start offset. */ - entry = list_first_entry(bitmaps, struct btrfs_free_space, list); - if (entry->offset != bitmap_offset) { + if (!list_empty(bitmaps)) + entry = list_first_entry(bitmaps, struct btrfs_free_space, list); + + if (!entry || entry->offset != bitmap_offset) { entry = tree_search_offset(ctl, bitmap_offset, 1, 0); if (entry && list_empty(&entry->list)) list_add(&entry->list, bitmaps); -- cgit v0.10.2 From bb1591b4ea1a1485ebc79be4e4748e94f96c670b Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 14 Dec 2015 15:40:44 -0800 Subject: Btrfs: check prepare_uptodate_page() error code earlier prepare_pages() may end up calling prepare_uptodate_page() twice if our write only spans a single page. But if the first call returns an error, our page will be unlocked and its not safe to call it again. This bug goes all the way back to 2011, and it's not something commonly hit. While we're here, add a more explicit check for the page being truncated away. The bare lock_page() alone is protected only by good thoughts and i_mutex, which we're sure to regret eventually. Reported-by: Dave Jones Signed-off-by: Chris Mason diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 8eb1f3c..8701505 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1291,7 +1291,8 @@ out: * on error we return an unlocked page and the error value * on success we return a locked page and 0 */ -static int prepare_uptodate_page(struct page *page, u64 pos, +static int prepare_uptodate_page(struct inode *inode, + struct page *page, u64 pos, bool force_uptodate) { int ret = 0; @@ -1306,6 +1307,10 @@ static int prepare_uptodate_page(struct page *page, u64 pos, unlock_page(page); return -EIO; } + if (page->mapping != inode->i_mapping) { + unlock_page(page); + return -EAGAIN; + } } return 0; } @@ -1324,6 +1329,7 @@ static noinline int prepare_pages(struct inode *inode, struct page **pages, int faili; for (i = 0; i < num_pages; i++) { +again: pages[i] = find_or_create_page(inode->i_mapping, index + i, mask | __GFP_WRITE); if (!pages[i]) { @@ -1333,13 +1339,17 @@ static noinline int prepare_pages(struct inode *inode, struct page **pages, } if (i == 0) - err = prepare_uptodate_page(pages[i], pos, + err = prepare_uptodate_page(inode, pages[i], pos, force_uptodate); - if (i == num_pages - 1) - err = prepare_uptodate_page(pages[i], + if (!err && i == num_pages - 1) + err = prepare_uptodate_page(inode, pages[i], pos + write_bytes, false); if (err) { page_cache_release(pages[i]); + if (err == -EAGAIN) { + err = 0; + goto again; + } faili = i - 1; goto fail; } -- cgit v0.10.2 From 3eab4588c958205451fd80dfd219955c5e91c18b Mon Sep 17 00:00:00 2001 From: Charlie Mooney Date: Tue, 15 Dec 2015 11:32:10 -0800 Subject: Input: elan_i2c - set input device's vendor and product IDs Previously the "vendor" and "product" IDs for the elan_i2c driver simply reported 0000. This patch modifies the elan_i2c driver to include the Elan vendor ID and the touchpad's product id under input/input*/{vendor,product}. Specifically, this is to allow us to apply a generic Elan gestures config that will apply to all Elan touchpads on ChromeOS. These configs match to input devices in various ways, but one major way is by matching on vendor ID. Adding this patch allows the default Elan touchpad config to be applied to Elan touchpads in this kernel by matching on devices that have vendor ID 04f3. Note that product ID is also available via custom sysfs entry "product_id" as well. Signed-off-by: Charlie Mooney Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 5e1665b..2f58985 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -41,6 +41,7 @@ #define DRIVER_NAME "elan_i2c" #define ELAN_DRIVER_VERSION "1.6.1" +#define ELAN_VENDOR_ID 0x04f3 #define ETP_MAX_PRESSURE 255 #define ETP_FWIDTH_REDUCE 90 #define ETP_FINGER_WIDTH 15 @@ -914,6 +915,8 @@ static int elan_setup_input_device(struct elan_tp_data *data) input->name = "Elan Touchpad"; input->id.bustype = BUS_I2C; + input->id.vendor = ELAN_VENDOR_ID; + input->id.product = data->product_id; input_set_drvdata(input, data); error = input_mt_init_slots(input, ETP_MAX_FINGERS, -- cgit v0.10.2 From c4aa1937b7f40adc93e2e0a901314a4bd8991174 Mon Sep 17 00:00:00 2001 From: Lijun Pan Date: Fri, 11 Dec 2015 13:55:02 -0600 Subject: fsl-ifc: add missing include on ARM64 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Need to include sched.h to fix the following compilation error if FSL_IFC is enabled on ARM64 machine. In file included from include/linux/mmzone.h:9:0, from include/linux/gfp.h:5, from include/linux/kmod.h:22, from include/linux/module.h:13, from drivers/memory/fsl_ifc.c:22: drivers/memory/fsl_ifc.c: In function ‘check_nand_stat’: include/linux/wait.h:165:35: error: ‘TASK_NORMAL’ undeclared (first use in this function) #define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL) ^ drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’ wake_up(&ctrl->nand_wait); ^ include/linux/wait.h:165:35: note: each undeclared identifier is reported only once for each function it appears in #define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL) ^ drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’ wake_up(&ctrl->nand_wait); ^ Analysis is as follows: I put some instrumental code and get the following .h files inclusion sequence: In file included from ./arch/arm64/include/asm/compat.h:25:0, from ./arch/arm64/include/asm/stat.h:23, from include/linux/stat.h:5, from include/linux/module.h:10, from drivers/memory/fsl_ifc.c:23: include/linux/sched.h:113:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘struct’ struct sched_attr { ^ CONFIG_COMPAT=y is enabled while 39 and 48 bit VA is selected. When 42 bit VA is selected, it does not enable CONFIG_COMPAT=y In ./arch/arm64/include/asm/stat.h:23, it has "#ifdef CONFIG_COMPAT" "#include " "..." "#endif" Since ./arch/arm64/include/asm/stat.h does not include ./arch/arm64/include/asm/compat.h, then it will not include include/linux/sched.h Hence we have to manually add "#include " in drivers/memory/fsl_ifc.c Signed-off-by: Lijun Pan Signed-off-by: Arnd Bergmann diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c index e87459f..acd1460 100644 --- a/drivers/memory/fsl_ifc.c +++ b/drivers/memory/fsl_ifc.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From 2475c362134a0fa5309c7b0fdb6fc1b86dca88a1 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 16 Dec 2015 21:26:28 +1100 Subject: Partial revert of "powerpc: Individual System V IPC system calls" This partially reverts commit a34236155afb1cc41945e58388ac988431bcb0b8. While reviewing the glibc patch to exploit the individual IPC calls, Arnd & Andreas noticed that we were still requiring userspace to pass IPC_64 in order to get the new style IPC API. With a bit of cleanup in the kernel we can drop that requirement, and instead only provide the new style API, which will simplify things for userspace. Rather than try and sneak that patch into 4.4, instead we will drop the individual IPC calls for powerpc, and merge them again in 4.5 once the cleanup patch has gone in. Because we've already added sys_mlock2() as syscall #378, we don't do a full revert of the IPC calls. Instead we drop the __NR #defines, and send those now undefined syscall numbers to sys_ni_syscall(). This leaves a gap in the syscall numbers, but we'll reuse them when we merge the individual IPC calls. Signed-off-by: Michael Ellerman Acked-by: Arnd Bergmann diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index f2b0b1b..5654ece 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -370,16 +370,16 @@ COMPAT_SYS(execveat) PPC64ONLY(switch_endian) SYSCALL_SPU(userfaultfd) SYSCALL_SPU(membarrier) -SYSCALL(semop) -SYSCALL(semget) -COMPAT_SYS(semctl) -COMPAT_SYS(semtimedop) -COMPAT_SYS(msgsnd) -COMPAT_SYS(msgrcv) -SYSCALL(msgget) -COMPAT_SYS(msgctl) -COMPAT_SYS(shmat) -SYSCALL(shmdt) -SYSCALL(shmget) -COMPAT_SYS(shmctl) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) SYSCALL(mlock2) diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index 1effea5..12a0565 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -388,18 +388,6 @@ #define __NR_switch_endian 363 #define __NR_userfaultfd 364 #define __NR_membarrier 365 -#define __NR_semop 366 -#define __NR_semget 367 -#define __NR_semctl 368 -#define __NR_semtimedop 369 -#define __NR_msgsnd 370 -#define __NR_msgrcv 371 -#define __NR_msgget 372 -#define __NR_msgctl 373 -#define __NR_shmat 374 -#define __NR_shmdt 375 -#define __NR_shmget 376 -#define __NR_shmctl 377 #define __NR_mlock2 378 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ -- cgit v0.10.2 From 56ea1075e7f07724cf9b91039aa0968a0c70112f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Nov 2015 13:57:37 +0000 Subject: spi: spidev: Hold spi_lock over all defererences of spi in release() We use the spi_lock spinlock to protect against races between the device being removed and file operations on the spidev. This means that in the removal path all references to the device need to be done under lock as in removal we dropping references to the device. Reported-by: Vegard Nossum Signed-off-by: Mark Brown diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 91a0fcd..d0e7dfc 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -651,11 +651,11 @@ static int spidev_release(struct inode *inode, struct file *filp) kfree(spidev->rx_buffer); spidev->rx_buffer = NULL; + spin_lock_irq(&spidev->spi_lock); if (spidev->spi) spidev->speed_hz = spidev->spi->max_speed_hz; /* ... after we unbound from the underlying device? */ - spin_lock_irq(&spidev->spi_lock); dofree = (spidev->spi == NULL); spin_unlock_irq(&spidev->spi_lock); -- cgit v0.10.2 From 157f38f993919b648187ba341bfb05d0e91ad2f6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 14 Dec 2015 16:16:19 +0100 Subject: spi: fix parent-device reference leak Fix parent-device reference leak due to SPI-core taking an unnecessary reference to the parent when allocating the master structure, a reference that was never released. Note that driver core takes its own reference to the parent when the master device is registered. Fixes: 49dce689ad4e ("spi doesn't need class_device") Signed-off-by: Johan Hovold Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index e2415be..7bf2527 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1704,7 +1704,7 @@ struct spi_master *spi_alloc_master(struct device *dev, unsigned size) master->bus_num = -1; master->num_chipselect = 1; master->dev.class = &spi_master_class; - master->dev.parent = get_device(dev); + master->dev.parent = dev; spi_master_set_devdata(master, &master[1]); return master; -- cgit v0.10.2 From dd39a26538e37f6c6131e829a4a510787e43c783 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 11 Dec 2015 12:09:03 +0000 Subject: scripts: recordmcount: break hardlinks recordmcount edits the file in-place, which can cause problems when using ccache in hardlink mode. Arrange for recordmcount to break a hardlinked object. Link: http://lkml.kernel.org/r/E1a7MVT-0000et-62@rmk-PC.arm.linux.org.uk Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by: Russell King Signed-off-by: Steven Rostedt diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index 698768b..91705ef 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -211,6 +211,20 @@ static void *mmap_file(char const *fname) addr = umalloc(sb.st_size); uread(fd_map, addr, sb.st_size); } + if (sb.st_nlink != 1) { + /* file is hard-linked, break the hard link */ + close(fd_map); + if (unlink(fname) < 0) { + perror(fname); + fail_file(); + } + fd_map = open(fname, O_RDWR | O_CREAT, sb.st_mode); + if (fd_map < 0) { + perror(fname); + fail_file(); + } + uwrite(fd_map, addr, sb.st_size); + } return addr; } -- cgit v0.10.2 From be20aa00c67102aaa54599518c086a2338b19f4c Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sun, 29 Nov 2015 08:46:14 -0500 Subject: nfsd: don't hold ls_mutex across a layout recall We do need to serialize layout stateid morphing operations, but we currently hold the ls_mutex across a layout recall which is pretty ugly. It's also unnecessary -- once we've bumped the seqid and copied it, we don't need to serialize the rest of the CB_LAYOUTRECALL vs. anything else. Just drop the mutex once the copy is done. This was causing a "workqueue leaked lock or atomic" warning and an occasional deadlock. There's more work to be done here but this fixes the immediate regression. Fixes: cc8a55320b5f "nfsd: serialize layout stateid morphing operations" Cc: stable@vger.kernel.org Reported-by: Kinglong Mee Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfs4layouts.c b/fs/nfsd/nfs4layouts.c index 9ffef06..c9d6c71 100644 --- a/fs/nfsd/nfs4layouts.c +++ b/fs/nfsd/nfs4layouts.c @@ -616,6 +616,7 @@ nfsd4_cb_layout_prepare(struct nfsd4_callback *cb) mutex_lock(&ls->ls_mutex); nfs4_inc_and_copy_stateid(&ls->ls_recall_sid, &ls->ls_stid); + mutex_unlock(&ls->ls_mutex); } static int @@ -659,7 +660,6 @@ nfsd4_cb_layout_release(struct nfsd4_callback *cb) trace_layout_recall_release(&ls->ls_stid.sc_stateid); - mutex_unlock(&ls->ls_mutex); nfsd4_return_all_layouts(ls, &reaplist); nfsd4_free_layouts(&reaplist); nfs4_put_stid(&ls->ls_stid); -- cgit v0.10.2 From a50bd43935586420fb75f4558369eb08566fac5e Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Tue, 15 Dec 2015 16:06:10 -0500 Subject: ftrace/scripts: Have recordmcount copy the object file Russell King found that he had weird side effects when compiling the kernel with hard linked ccache. The reason was that recordmcount modified the kernel in place via mmap, and when a file gets modified twice by recordmcount, it will complain about it. To fix this issue, Russell wrote a patch that checked if the file was hard linked more than once and would unlink it if it was. Linus Torvalds was not happy with the fact that recordmcount does this in place modification. Instead of doing the unlink only if the file has two or more hard links, it does the unlink all the time. In otherwords, it always does a copy if it changed something. That is, it does the write out if a change was made. Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by: Steven Rostedt diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index 91705ef..301d70b 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -48,12 +48,17 @@ static int fd_map; /* File descriptor for file being modified. */ static int mmap_failed; /* Boolean flag. */ -static void *ehdr_curr; /* current ElfXX_Ehdr * for resource cleanup */ static char gpfx; /* prefix for global symbol name (sometimes '_') */ static struct stat sb; /* Remember .st_size, etc. */ static jmp_buf jmpenv; /* setjmp/longjmp per-file error escape */ static const char *altmcount; /* alternate mcount symbol name */ static int warn_on_notrace_sect; /* warn when section has mcount not being recorded */ +static void *file_map; /* pointer of the mapped file */ +static void *file_end; /* pointer to the end of the mapped file */ +static int file_updated; /* flag to state file was changed */ +static void *file_ptr; /* current file pointer location */ +static void *file_append; /* added to the end of the file */ +static size_t file_append_size; /* how much is added to end of file */ /* setjmp() return values */ enum { @@ -67,10 +72,14 @@ static void cleanup(void) { if (!mmap_failed) - munmap(ehdr_curr, sb.st_size); + munmap(file_map, sb.st_size); else - free(ehdr_curr); - close(fd_map); + free(file_map); + file_map = NULL; + free(file_append); + file_append = NULL; + file_append_size = 0; + file_updated = 0; } static void __attribute__((noreturn)) @@ -92,12 +101,22 @@ succeed_file(void) static off_t ulseek(int const fd, off_t const offset, int const whence) { - off_t const w = lseek(fd, offset, whence); - if (w == (off_t)-1) { - perror("lseek"); + switch (whence) { + case SEEK_SET: + file_ptr = file_map + offset; + break; + case SEEK_CUR: + file_ptr += offset; + break; + case SEEK_END: + file_ptr = file_map + (sb.st_size - offset); + break; + } + if (file_ptr < file_map) { + fprintf(stderr, "lseek: seek before file\n"); fail_file(); } - return w; + return file_ptr - file_map; } static size_t @@ -114,12 +133,38 @@ uread(int const fd, void *const buf, size_t const count) static size_t uwrite(int const fd, void const *const buf, size_t const count) { - size_t const n = write(fd, buf, count); - if (n != count) { - perror("write"); - fail_file(); + size_t cnt = count; + off_t idx = 0; + + file_updated = 1; + + if (file_ptr + count >= file_end) { + off_t aoffset = (file_ptr + count) - file_end; + + if (aoffset > file_append_size) { + file_append = realloc(file_append, aoffset); + file_append_size = aoffset; + } + if (!file_append) { + perror("write"); + fail_file(); + } + if (file_ptr < file_end) { + cnt = file_end - file_ptr; + } else { + cnt = 0; + idx = aoffset - count; + } } - return n; + + if (cnt) + memcpy(file_ptr, buf, cnt); + + if (cnt < count) + memcpy(file_append + idx, buf + cnt, count - cnt); + + file_ptr += count; + return count; } static void * @@ -192,9 +237,7 @@ static int make_nop_arm64(void *map, size_t const offset) */ static void *mmap_file(char const *fname) { - void *addr; - - fd_map = open(fname, O_RDWR); + fd_map = open(fname, O_RDONLY); if (fd_map < 0 || fstat(fd_map, &sb) < 0) { perror(fname); fail_file(); @@ -203,29 +246,58 @@ static void *mmap_file(char const *fname) fprintf(stderr, "not a regular file: %s\n", fname); fail_file(); } - addr = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE, - fd_map, 0); + file_map = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE, + fd_map, 0); mmap_failed = 0; - if (addr == MAP_FAILED) { + if (file_map == MAP_FAILED) { mmap_failed = 1; - addr = umalloc(sb.st_size); - uread(fd_map, addr, sb.st_size); + file_map = umalloc(sb.st_size); + uread(fd_map, file_map, sb.st_size); } - if (sb.st_nlink != 1) { - /* file is hard-linked, break the hard link */ - close(fd_map); - if (unlink(fname) < 0) { - perror(fname); - fail_file(); - } - fd_map = open(fname, O_RDWR | O_CREAT, sb.st_mode); - if (fd_map < 0) { - perror(fname); + close(fd_map); + + file_end = file_map + sb.st_size; + + return file_map; +} + +static void write_file(const char *fname) +{ + char tmp_file[strlen(fname) + 4]; + size_t n; + + if (!file_updated) + return; + + sprintf(tmp_file, "%s.rc", fname); + + /* + * After reading the entire file into memory, delete it + * and write it back, to prevent weird side effects of modifying + * an object file in place. + */ + fd_map = open(tmp_file, O_WRONLY | O_TRUNC | O_CREAT, sb.st_mode); + if (fd_map < 0) { + perror(fname); + fail_file(); + } + n = write(fd_map, file_map, sb.st_size); + if (n != sb.st_size) { + perror("write"); + fail_file(); + } + if (file_append_size) { + n = write(fd_map, file_append, file_append_size); + if (n != file_append_size) { + perror("write"); fail_file(); } - uwrite(fd_map, addr, sb.st_size); } - return addr; + close(fd_map); + if (rename(tmp_file, fname) < 0) { + perror(fname); + fail_file(); + } } /* w8rev, w8nat, ...: Handle endianness. */ @@ -332,7 +404,6 @@ do_file(char const *const fname) Elf32_Ehdr *const ehdr = mmap_file(fname); unsigned int reltype = 0; - ehdr_curr = ehdr; w = w4nat; w2 = w2nat; w8 = w8nat; @@ -455,6 +526,7 @@ do_file(char const *const fname) } } /* end switch */ + write_file(fname); cleanup(); } @@ -507,11 +579,14 @@ main(int argc, char *argv[]) case SJ_SETJMP: /* normal sequence */ /* Avoid problems if early cleanup() */ fd_map = -1; - ehdr_curr = NULL; mmap_failed = 1; + file_map = NULL; + file_ptr = NULL; + file_updated = 0; do_file(file); break; case SJ_FAIL: /* error in do_file or below */ + sprintf("%s: failed\n", file); ++n_error; break; case SJ_SUCCEED: /* premature success */ -- cgit v0.10.2 From 97cb69dd800a471c3ee2467be3826badd9c12883 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Fri, 20 Nov 2015 15:44:20 +0530 Subject: UBI: fix return error code We are checking dfs_rootdir for error value or NULL. But in the conditional ternary operator we returned -ENODEV if dfs_rootdir contains an error value and returned PTR_ERR(dfs_rootdir) if dfs_rootdir is NULL. So in the case of dfs_rootdir being NULL we actually assigned 0 to err and returned it to the caller implying a success. Lets return -ENODEV when dfs_rootdir is NULL else return PTR_ERR(dfs_rootdir). Signed-off-by: Sudip Mukherjee Signed-off-by: Richard Weinberger diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c index b077e43..c4cb15a 100644 --- a/drivers/mtd/ubi/debug.c +++ b/drivers/mtd/ubi/debug.c @@ -236,7 +236,7 @@ int ubi_debugfs_init(void) dfs_rootdir = debugfs_create_dir("ubi", NULL); if (IS_ERR_OR_NULL(dfs_rootdir)) { - int err = dfs_rootdir ? -ENODEV : PTR_ERR(dfs_rootdir); + int err = dfs_rootdir ? PTR_ERR(dfs_rootdir) : -ENODEV; pr_err("UBI error: cannot create \"ubi\" debugfs directory, error %d\n", err); -- cgit v0.10.2 From 2e69d4912f2fc9d4cd952311d58ceae1cd83057b Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 20 Nov 2015 14:10:54 -0800 Subject: UBI: fix use of "VID" vs. "EC" in header self-check Looks like a typo, using UBI_EC_HDR_SIZE_CRC (note the "EC") to compute the CRC for the VID header. This shouldn't cause any functional change, as both structures are 64 bytes. Verified with: BUILD_BUG_ON(UBI_VID_HDR_SIZE_CRC != UBI_EC_HDR_SIZE_CRC); Reported here: http://lists.infradead.org/pipermail/linux-mtd/2013-September/048570.html Reported by: Bill Pringlemeir Signed-off-by: Brian Norris Signed-off-by: Richard Weinberger diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 1fc23e4..10cf3b5 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -1299,7 +1299,7 @@ static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum) if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err)) goto exit; - crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC); + crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC); hdr_crc = be32_to_cpu(vid_hdr->hdr_crc); if (hdr_crc != crc) { ubi_err(ubi, "bad VID header CRC at PEB %d, calculated %#08x, read %#08x", -- cgit v0.10.2 From 1a31b20cd81d5cbc7ec6e24cb08066009a1ca32d Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 26 Nov 2015 21:23:48 +0100 Subject: mtd: ubi: fixup error correction in do_sync_erase() Since fastmap we gained do_sync_erase(). This function can return an error and its error handling isn't obvious. First the memory allocation for struct ubi_work can fail and as such struct ubi_wl_entry is leaked. However if the memory allocation succeeds then the tail function takes care of the struct ubi_wl_entry. A free here could result in a double free. To make the error handling simpler, I split the tail function into one piece which does the work and another which frees the struct ubi_work which is passed as argument. As result do_sync_erase() can keep the struct on stack and we get rid of one error source. Cc: Fixes: 8199b901a ("UBI: Add fastmap support to the WL sub-system") Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Richard Weinberger diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index eb4489f9..f73233f 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -603,6 +603,7 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, return 0; } +static int __erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk); /** * do_sync_erase - run the erase worker synchronously. * @ubi: UBI device description object @@ -615,20 +616,16 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, static int do_sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, int vol_id, int lnum, int torture) { - struct ubi_work *wl_wrk; + struct ubi_work wl_wrk; dbg_wl("sync erase of PEB %i", e->pnum); - wl_wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS); - if (!wl_wrk) - return -ENOMEM; - - wl_wrk->e = e; - wl_wrk->vol_id = vol_id; - wl_wrk->lnum = lnum; - wl_wrk->torture = torture; + wl_wrk.e = e; + wl_wrk.vol_id = vol_id; + wl_wrk.lnum = lnum; + wl_wrk.torture = torture; - return erase_worker(ubi, wl_wrk, 0); + return __erase_worker(ubi, &wl_wrk); } /** @@ -1014,7 +1011,7 @@ out_unlock: } /** - * erase_worker - physical eraseblock erase worker function. + * __erase_worker - physical eraseblock erase worker function. * @ubi: UBI device description object * @wl_wrk: the work object * @shutdown: non-zero if the worker has to free memory and exit @@ -1025,8 +1022,7 @@ out_unlock: * needed. Returns zero in case of success and a negative error code in case of * failure. */ -static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, - int shutdown) +static int __erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk) { struct ubi_wl_entry *e = wl_wrk->e; int pnum = e->pnum; @@ -1034,21 +1030,11 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, int lnum = wl_wrk->lnum; int err, available_consumed = 0; - if (shutdown) { - dbg_wl("cancel erasure of PEB %d EC %d", pnum, e->ec); - kfree(wl_wrk); - wl_entry_destroy(ubi, e); - return 0; - } - dbg_wl("erase PEB %d EC %d LEB %d:%d", pnum, e->ec, wl_wrk->vol_id, wl_wrk->lnum); err = sync_erase(ubi, e, wl_wrk->torture); if (!err) { - /* Fine, we've erased it successfully */ - kfree(wl_wrk); - spin_lock(&ubi->wl_lock); wl_tree_add(e, &ubi->free); ubi->free_count++; @@ -1066,7 +1052,6 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, } ubi_err(ubi, "failed to erase PEB %d, error %d", pnum, err); - kfree(wl_wrk); if (err == -EINTR || err == -ENOMEM || err == -EAGAIN || err == -EBUSY) { @@ -1150,6 +1135,25 @@ out_ro: return err; } +static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk, + int shutdown) +{ + int ret; + + if (shutdown) { + struct ubi_wl_entry *e = wl_wrk->e; + + dbg_wl("cancel erasure of PEB %d EC %d", e->pnum, e->ec); + kfree(wl_wrk); + wl_entry_destroy(ubi, e); + return 0; + } + + ret = __erase_worker(ubi, wl_wrk); + kfree(wl_wrk); + return ret; +} + /** * ubi_wl_put_peb - return a PEB to the wear-leveling sub-system. * @ubi: UBI device description object -- cgit v0.10.2 From 6b238de189f69dc77d660d4cce62eed15547f4c3 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 26 Nov 2015 21:23:49 +0100 Subject: mtd: ubi: don't leak e if schedule_erase() fails If __erase_worker() fails to erase the EB and schedule_erase() fails as well to do anything about it then we go RO. But that is not a reason to leak the e argument here. Therefore clean up e. Cc: Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Richard Weinberger diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index f73233f..5606563 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1060,6 +1060,7 @@ static int __erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk) /* Re-schedule the LEB for erasure */ err1 = schedule_erase(ubi, e, vol_id, lnum, 0); if (err1) { + wl_entry_destroy(ubi, e); err = err1; goto out_ro; } -- cgit v0.10.2 From 91acbeb68ab10c0c0f65f30b5b7fddbde4c97dd2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 14 Dec 2015 16:42:31 +0100 Subject: drm/amdgpu: fix user fence handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a random corruption under memory pressure. We need to fence the BO for the user fence as well, otherwise it might be swapped out and the GPU could write the fence value to an undesired location. Signed-off-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 5a5f04d..048cfe0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1264,7 +1264,8 @@ struct amdgpu_cs_parser { struct ww_acquire_ctx ticket; /* user fence */ - struct amdgpu_user_fence uf; + struct amdgpu_user_fence uf; + struct amdgpu_bo_list_entry uf_entry; }; struct amdgpu_job { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index 4f352ec..25a3e248 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -127,6 +127,37 @@ int amdgpu_cs_get_ring(struct amdgpu_device *adev, u32 ip_type, return 0; } +static int amdgpu_cs_user_fence_chunk(struct amdgpu_cs_parser *p, + struct drm_amdgpu_cs_chunk_fence *fence_data) +{ + struct drm_gem_object *gobj; + uint32_t handle; + + handle = fence_data->handle; + gobj = drm_gem_object_lookup(p->adev->ddev, p->filp, + fence_data->handle); + if (gobj == NULL) + return -EINVAL; + + p->uf.bo = amdgpu_bo_ref(gem_to_amdgpu_bo(gobj)); + p->uf.offset = fence_data->offset; + + if (amdgpu_ttm_tt_has_userptr(p->uf.bo->tbo.ttm)) { + drm_gem_object_unreference_unlocked(gobj); + return -EINVAL; + } + + p->uf_entry.robj = amdgpu_bo_ref(p->uf.bo); + p->uf_entry.prefered_domains = AMDGPU_GEM_DOMAIN_GTT; + p->uf_entry.allowed_domains = AMDGPU_GEM_DOMAIN_GTT; + p->uf_entry.priority = 0; + p->uf_entry.tv.bo = &p->uf_entry.robj->tbo; + p->uf_entry.tv.shared = true; + + drm_gem_object_unreference_unlocked(gobj); + return 0; +} + int amdgpu_cs_parser_init(struct amdgpu_cs_parser *p, void *data) { union drm_amdgpu_cs *cs = data; @@ -207,28 +238,15 @@ int amdgpu_cs_parser_init(struct amdgpu_cs_parser *p, void *data) case AMDGPU_CHUNK_ID_FENCE: size = sizeof(struct drm_amdgpu_cs_chunk_fence); - if (p->chunks[i].length_dw * sizeof(uint32_t) >= size) { - uint32_t handle; - struct drm_gem_object *gobj; - struct drm_amdgpu_cs_chunk_fence *fence_data; - - fence_data = (void *)p->chunks[i].kdata; - handle = fence_data->handle; - gobj = drm_gem_object_lookup(p->adev->ddev, - p->filp, handle); - if (gobj == NULL) { - ret = -EINVAL; - goto free_partial_kdata; - } - - p->uf.bo = gem_to_amdgpu_bo(gobj); - amdgpu_bo_ref(p->uf.bo); - drm_gem_object_unreference_unlocked(gobj); - p->uf.offset = fence_data->offset; - } else { + if (p->chunks[i].length_dw * sizeof(uint32_t) < size) { ret = -EINVAL; goto free_partial_kdata; } + + ret = amdgpu_cs_user_fence_chunk(p, (void *)p->chunks[i].kdata); + if (ret) + goto free_partial_kdata; + break; case AMDGPU_CHUNK_ID_DEPENDENCIES: @@ -391,6 +409,9 @@ static int amdgpu_cs_parser_relocs(struct amdgpu_cs_parser *p) p->vm_bos = amdgpu_vm_get_bos(p->adev, &fpriv->vm, &p->validated); + if (p->uf.bo) + list_add(&p->uf_entry.tv.head, &p->validated); + if (need_mmap_lock) down_read(¤t->mm->mmap_sem); @@ -488,8 +509,8 @@ static void amdgpu_cs_parser_fini(struct amdgpu_cs_parser *parser, int error, bo for (i = 0; i < parser->num_ibs; i++) amdgpu_ib_free(parser->adev, &parser->ibs[i]); kfree(parser->ibs); - if (parser->uf.bo) - amdgpu_bo_unref(&parser->uf.bo); + amdgpu_bo_unref(&parser->uf.bo); + amdgpu_bo_unref(&parser->uf_entry.robj); } static int amdgpu_bo_vm_update_pte(struct amdgpu_cs_parser *p, -- cgit v0.10.2 From ff1c0b6a795bce744527bc10c8268127ed818b42 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 15 Dec 2015 13:57:16 +0530 Subject: ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE HIGHMEM support bumped the default memory size for nsim platform to 1G. Thus total memory ended at the very edge of start of peripherals address space. With linux link base shifted, memory started bleeding into peripheral space which caused early boot bad_page spew ! Fixes: 29e332261d2 ("ARC: mm: HIGHMEM: populate high memory from DT") Reported-by: Anton Kolesov Signed-off-by: Vineet Gupta diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 2c2ac3f..6312f60 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -445,6 +445,7 @@ config LINUX_LINK_BASE However some customers have peripherals mapped at this addr, so Linux needs to be scooted a bit. If you don't know what the above means, leave this setting alone. + This needs to match memory start address specified in Device Tree config HIGHMEM bool "High Memory Support" diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts index b0eb0e7..fc81879 100644 --- a/arch/arc/boot/dts/nsim_hs.dts +++ b/arch/arc/boot/dts/nsim_hs.dts @@ -17,7 +17,8 @@ memory { device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000 /* 1 GB low mem */ + /* CONFIG_LINUX_LINK_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ }; diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index a9305b5..7d2c4fb 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -51,7 +51,9 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) int in_use = 0; if (!low_mem_sz) { - BUG_ON(base != low_mem_start); + if (base != low_mem_start) + panic("CONFIG_LINUX_LINK_BASE != DT memory { }"); + low_mem_sz = size; in_use = 1; } else { -- cgit v0.10.2 From bc79c9a7216562a2035d2f64f73626613c1300d0 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 18:04:22 +0530 Subject: ARC: dw2 unwind: Reinstante unwinding out of modules The fix which removed linear searching of dwarf (because binary lookup data always exists) missed out on the fact that modules don't get the binary lookup tables info. This caused unwinding out of modules to stop working. So add binary lookup header setup (equivalent of eh_frame_hdr setup) to modules as well. While at it, confine the header setup to within unwinder code, reducing one API exposed out of unwinder code. Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Cc: Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/unwind.h b/arch/arc/include/asm/unwind.h index 7ca628b..c11a25b 100644 --- a/arch/arc/include/asm/unwind.h +++ b/arch/arc/include/asm/unwind.h @@ -112,7 +112,6 @@ struct unwind_frame_info { extern int arc_unwind(struct unwind_frame_info *frame); extern void arc_unwind_init(void); -extern void arc_unwind_setup(void); extern void *unwind_add_table(struct module *module, const void *table_start, unsigned long table_size); extern void unwind_remove_table(void *handle, int init_only); @@ -152,9 +151,6 @@ static inline void arc_unwind_init(void) { } -static inline void arc_unwind_setup(void) -{ -} #define unwind_add_table(a, b, c) #define unwind_remove_table(a, b) diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index c33e77c..e1b8744 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -429,7 +429,6 @@ void __init setup_arch(char **cmdline_p) #endif arc_unwind_init(); - arc_unwind_setup(); } static int __init customize_machine(void) diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index 7352475..9f9ecc1 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -170,6 +170,23 @@ static struct unwind_table *find_table(unsigned long pc) static unsigned long read_pointer(const u8 **pLoc, const void *end, signed ptrType); +static void init_unwind_hdr(struct unwind_table *table, + void *(*alloc) (unsigned long)); + +/* + * wrappers for header alloc (vs. calling one vs. other at call site) + * to elide section mismatches warnings + */ +static void *__init unw_hdr_alloc_early(unsigned long sz) +{ + return __alloc_bootmem_nopanic(sz, sizeof(unsigned int), + MAX_DMA_ADDRESS); +} + +static void *unw_hdr_alloc(unsigned long sz) +{ + return kmalloc(sz, GFP_KERNEL); +} static void init_unwind_table(struct unwind_table *table, const char *name, const void *core_start, unsigned long core_size, @@ -209,6 +226,8 @@ void __init arc_unwind_init(void) __start_unwind, __end_unwind - __start_unwind, NULL, 0); /*__start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);*/ + + init_unwind_hdr(&root_table, unw_hdr_alloc_early); } static const u32 bad_cie, not_fde; @@ -241,8 +260,8 @@ static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size) e2->fde = v; } -static void __init setup_unwind_table(struct unwind_table *table, - void *(*alloc) (unsigned long)) +static void init_unwind_hdr(struct unwind_table *table, + void *(*alloc) (unsigned long)) { const u8 *ptr; unsigned long tableSize = table->size, hdrSize; @@ -300,9 +319,11 @@ static void __init setup_unwind_table(struct unwind_table *table, hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int) + 2 * n * sizeof(unsigned long); + header = alloc(hdrSize); if (!header) return; + header->version = 1; header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native; header->fde_count_enc = DW_EH_PE_abs | DW_EH_PE_data4; @@ -342,18 +363,6 @@ static void __init setup_unwind_table(struct unwind_table *table, table->header = (const void *)header; } -static void *__init balloc(unsigned long sz) -{ - return __alloc_bootmem_nopanic(sz, - sizeof(unsigned int), - __pa(MAX_DMA_ADDRESS)); -} - -void __init arc_unwind_setup(void) -{ - setup_unwind_table(&root_table, balloc); -} - #ifdef CONFIG_MODULES static struct unwind_table *last_table; @@ -377,6 +386,8 @@ void *unwind_add_table(struct module *module, const void *table_start, table_start, table_size, NULL, 0); + init_unwind_hdr(table, unw_hdr_alloc); + #ifdef UNWIND_DEBUG unw_debug("Table added for [%s] %lx %lx\n", module->name, table->core.pc, table->core.range); @@ -439,6 +450,7 @@ void unwind_remove_table(void *handle, int init_only) info.init_only = init_only; unlink_table(&info); /* XXX: SMP */ + kfree(table->header); kfree(table); } -- cgit v0.10.2 From 323f41f9e7d0cb5b1d1586aded6682855f1e646d Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 16 Dec 2015 17:17:00 +0530 Subject: ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing ARC dwarf unwinder only supports CIE version == 1 The boot time dwarf sanitizer (part of binary lookup table constructor) would simply bail if it saw CIE version == 3, rendering unwinder with a NULL lookup table. It seems libgcc linked with kernel does have such entries. With fallback linear search removed, and a NULL binary lookup table, unwinder fails to generate any stack trace. So allow graceful ignoring of unsupported CIE entries. This problem was initially seen in Alexey's setup (and not mine) as he was using buildroot built toolchain (libgcc) which doesn't get built with CFLAGS_FOR_TARGET="-gdwarf-2 which is my default Fixes STAR 9000985048: "kernel unwinder broken with stock tools" Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Reported-by Alexey Brodkin Cc: Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index 9f9ecc1..cf2828a 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -293,13 +293,13 @@ static void init_unwind_hdr(struct unwind_table *table, const u32 *cie = cie_for_fde(fde, table); signed ptrType; - if (cie == ¬_fde) + if (cie == ¬_fde) /* only process FDE here */ continue; if (cie == NULL || cie == &bad_cie) - return; + continue; /* say FDE->CIE.version != 1 */ ptrType = fde_pointer_type(cie); if (ptrType < 0) - return; + continue; ptr = (const u8 *)(fde + 2); if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde, @@ -343,6 +343,10 @@ static void init_unwind_hdr(struct unwind_table *table, if (fde[1] == 0xffffffff) continue; /* this is a CIE */ + + if (*(u8 *)(cie + 2) != 1) + continue; /* FDE->CIE.version not supported */ + ptr = (const u8 *)(fde + 2); header->table[n].start = read_pointer(&ptr, (const u8 *)(fde + 1) + @@ -519,7 +523,8 @@ static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table) if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde) || (*cie & (sizeof(*cie) - 1)) - || (cie[1] != 0xffffffff)) + || (cie[1] != 0xffffffff) + || ( *(u8 *)(cie + 2) != 1)) /* version 1 supported */ return NULL; /* this is not a (valid) CIE */ return cie; } -- cgit v0.10.2 From b474a02382b75f4a75c4e94eb9847aad28dd4a37 Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Wed, 16 Dec 2015 03:10:27 +0200 Subject: ARC: rename smp operation init_irq_cpu() to init_per_cpu() This will better reflect its description i.e. "any needed setup..." and not just do an "IPI request". Signed-off-by: Noam Camus Acked-by: Vineet Gupta Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 133c867..9913804 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -48,7 +48,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq); * @init_early_smp: A SMP specific h/w block can init itself * Could be common across platforms so not covered by * mach_desc->init_early() - * @init_irq_cpu: Called for each core so SMP h/w block driver can do + * @init_per_cpu: Called for each core so SMP h/w block driver can do * any needed setup per cpu (e.g. IPI request) * @cpu_kick: For Master to kickstart a cpu (optionally at a PC) * @ipi_send: To send IPI to a @cpu @@ -57,7 +57,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq); struct plat_smp_ops { const char *info; void (*init_early_smp)(void); - void (*init_irq_cpu)(int cpu); + void (*init_per_cpu)(int cpu); void (*cpu_kick)(int cpu, unsigned long pc); void (*ipi_send)(int cpu); void (*ipi_clear)(int irq); diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index b1f7593..3917fe7 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -29,8 +29,8 @@ void __init init_IRQ(void) #ifdef CONFIG_SMP /* a SMP H/w block could do IPI IRQ request here */ - if (plat_smp_ops.init_irq_cpu) - plat_smp_ops.init_irq_cpu(smp_processor_id()); + if (plat_smp_ops.init_per_cpu) + plat_smp_ops.init_per_cpu(smp_processor_id()); if (machine_desc->init_cpu_smp) machine_desc->init_cpu_smp(smp_processor_id()); diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 74a9b07..bd237ac 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -132,7 +132,7 @@ static void mcip_probe_n_setup(void) struct plat_smp_ops plat_smp_ops = { .info = smp_cpuinfo_buf, .init_early_smp = mcip_probe_n_setup, - .init_irq_cpu = mcip_setup_per_cpu, + .init_per_cpu = mcip_setup_per_cpu, .ipi_send = mcip_ipi_send, .ipi_clear = mcip_ipi_clear, }; diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index 5805878..0b061a4 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -132,8 +132,8 @@ void start_kernel_secondary(void) pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); /* Some SMP H/w setup - for each cpu */ - if (plat_smp_ops.init_irq_cpu) - plat_smp_ops.init_irq_cpu(cpu); + if (plat_smp_ops.init_per_cpu) + plat_smp_ops.init_per_cpu(cpu); if (machine_desc->init_cpu_smp) machine_desc->init_cpu_smp(cpu); -- cgit v0.10.2 From 575a9d4e2c09675c05db2bc781c5c33153ce932f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 17 Dec 2015 12:22:21 +0530 Subject: ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu Makes it similar to smp_ops which also has callback with same name Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h index 6ff657a..c28e6c3 100644 --- a/arch/arc/include/asm/mach_desc.h +++ b/arch/arc/include/asm/mach_desc.h @@ -23,7 +23,7 @@ * @dt_compat: Array of device tree 'compatible' strings * (XXX: although only 1st entry is looked at) * @init_early: Very early callback [called from setup_arch()] - * @init_cpu_smp: for each CPU as it is coming up (SMP as well as UP) + * @init_per_cpu: for each CPU as it is coming up (SMP as well as UP) * [(M):init_IRQ(), (o):start_kernel_secondary()] * @init_machine: arch initcall level callback (e.g. populate static * platform devices or parse Devicetree) @@ -35,7 +35,7 @@ struct machine_desc { const char **dt_compat; void (*init_early)(void); #ifdef CONFIG_SMP - void (*init_cpu_smp)(unsigned int); + void (*init_per_cpu)(unsigned int); #endif void (*init_machine)(void); void (*init_late)(void); diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 3917fe7..ba17f85 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -32,8 +32,8 @@ void __init init_IRQ(void) if (plat_smp_ops.init_per_cpu) plat_smp_ops.init_per_cpu(smp_processor_id()); - if (machine_desc->init_cpu_smp) - machine_desc->init_cpu_smp(smp_processor_id()); + if (machine_desc->init_per_cpu) + machine_desc->init_per_cpu(smp_processor_id()); #endif } diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index 0b061a4..ef6e9e1 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -135,8 +135,8 @@ void start_kernel_secondary(void) if (plat_smp_ops.init_per_cpu) plat_smp_ops.init_per_cpu(cpu); - if (machine_desc->init_cpu_smp) - machine_desc->init_cpu_smp(cpu); + if (machine_desc->init_per_cpu) + machine_desc->init_per_cpu(cpu); arc_local_timer_setup(); -- cgit v0.10.2 From 74a599f09bec7419b2490039f0fb33bc8581ef7c Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 3 Dec 2015 17:24:00 +0100 Subject: virtio/s390: handle error values in irb The common I/O layer may pass an error value as the irb in the device's interrupt handler (for classic channel I/O). This won't happen in current virtio-ccw implementations, but it's better to be safe than sorry. Let's just return the error conveyed by the irb and clear any possible pending I/O indications. Signed-off-by: Cornelia Huck Reviewed-by: Guenther Hutzl Reviewed-by: Pierre Morel Signed-off-by: Michael S. Tsirkin diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c index b2a1a81..1b83159 100644 --- a/drivers/s390/virtio/virtio_ccw.c +++ b/drivers/s390/virtio/virtio_ccw.c @@ -984,6 +984,36 @@ static struct virtqueue *virtio_ccw_vq_by_ind(struct virtio_ccw_device *vcdev, return vq; } +static void virtio_ccw_check_activity(struct virtio_ccw_device *vcdev, + __u32 activity) +{ + if (vcdev->curr_io & activity) { + switch (activity) { + case VIRTIO_CCW_DOING_READ_FEAT: + case VIRTIO_CCW_DOING_WRITE_FEAT: + case VIRTIO_CCW_DOING_READ_CONFIG: + case VIRTIO_CCW_DOING_WRITE_CONFIG: + case VIRTIO_CCW_DOING_WRITE_STATUS: + case VIRTIO_CCW_DOING_SET_VQ: + case VIRTIO_CCW_DOING_SET_IND: + case VIRTIO_CCW_DOING_SET_CONF_IND: + case VIRTIO_CCW_DOING_RESET: + case VIRTIO_CCW_DOING_READ_VQ_CONF: + case VIRTIO_CCW_DOING_SET_IND_ADAPTER: + case VIRTIO_CCW_DOING_SET_VIRTIO_REV: + vcdev->curr_io &= ~activity; + wake_up(&vcdev->wait_q); + break; + default: + /* don't know what to do... */ + dev_warn(&vcdev->cdev->dev, + "Suspicious activity '%08x'\n", activity); + WARN_ON(1); + break; + } + } +} + static void virtio_ccw_int_handler(struct ccw_device *cdev, unsigned long intparm, struct irb *irb) @@ -995,6 +1025,12 @@ static void virtio_ccw_int_handler(struct ccw_device *cdev, if (!vcdev) return; + if (IS_ERR(irb)) { + vcdev->err = PTR_ERR(irb); + virtio_ccw_check_activity(vcdev, activity); + /* Don't poke around indicators, something's wrong. */ + return; + } /* Check if it's a notification from the host. */ if ((intparm == 0) && (scsw_stctl(&irb->scsw) == @@ -1010,31 +1046,7 @@ static void virtio_ccw_int_handler(struct ccw_device *cdev, /* Map everything else to -EIO. */ vcdev->err = -EIO; } - if (vcdev->curr_io & activity) { - switch (activity) { - case VIRTIO_CCW_DOING_READ_FEAT: - case VIRTIO_CCW_DOING_WRITE_FEAT: - case VIRTIO_CCW_DOING_READ_CONFIG: - case VIRTIO_CCW_DOING_WRITE_CONFIG: - case VIRTIO_CCW_DOING_WRITE_STATUS: - case VIRTIO_CCW_DOING_SET_VQ: - case VIRTIO_CCW_DOING_SET_IND: - case VIRTIO_CCW_DOING_SET_CONF_IND: - case VIRTIO_CCW_DOING_RESET: - case VIRTIO_CCW_DOING_READ_VQ_CONF: - case VIRTIO_CCW_DOING_SET_IND_ADAPTER: - case VIRTIO_CCW_DOING_SET_VIRTIO_REV: - vcdev->curr_io &= ~activity; - wake_up(&vcdev->wait_q); - break; - default: - /* don't know what to do... */ - dev_warn(&cdev->dev, "Suspicious activity '%08x'\n", - activity); - WARN_ON(1); - break; - } - } + virtio_ccw_check_activity(vcdev, activity); for_each_set_bit(i, &vcdev->indicators, sizeof(vcdev->indicators) * BITS_PER_BYTE) { /* The bit clear must happen before the vring kick. */ -- cgit v0.10.2 From 98da62b716a3b24ab8e77453c9a8a954124c18cd Mon Sep 17 00:00:00 2001 From: Stewart Smith Date: Fri, 11 Dec 2015 12:08:23 +1100 Subject: powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type When running on newer OPAL firmware that supports sending extra OPAL_MSG types, we would print a warning on *every* message received. This could be a problem for kernels that don't support OPAL_MSG_OCC on machines that are running real close to thermal limits and the OCC is throttling the chip. For a kernel that is paying attention to the message queue, we could get these notifications quite often. Conceivably, future message types could also come fairly often, and printing that we didn't understand them 10,000 times provides no further information than printing them once. Cc: stable@vger.kernel.org Signed-off-by: Stewart Smith Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 4296d55..57cffb8 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -278,7 +278,7 @@ static void opal_handle_message(void) /* Sanity check */ if (type >= OPAL_MSG_TYPE_MAX) { - pr_warning("%s: Unknown message type: %u\n", __func__, type); + pr_warn_once("%s: Unknown message type: %u\n", __func__, type); return; } opal_message_do_notify(type, (void *)&msg); -- cgit v0.10.2 From c803cc2dcd722e08020c1ba63bb5ceece4a19fdb Mon Sep 17 00:00:00 2001 From: Jean-Michel Hautbois Date: Thu, 17 Dec 2015 11:07:23 +0100 Subject: ASoC: sgtl5000: fix VAG power up timing When power up, a "pop" is heard on line-in and mic-in. An analysis of the PCM shows it lasts ~400ms and looks like a filter response. VAG power up should be delayed by 400ms as VAG power down is. Signed-off-by: Jean-Michel Hautbois Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index f540f82..08b4046 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -189,6 +189,7 @@ static int power_vag_event(struct snd_soc_dapm_widget *w, case SND_SOC_DAPM_POST_PMU: snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); + msleep(400); break; case SND_SOC_DAPM_PRE_PMD: -- cgit v0.10.2 From 67a76aafec00db46fbd65d7d17a1cde1adde70c5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 10 Dec 2015 15:55:29 +0100 Subject: gpio: generic: clamp values from bgpio_get_set() The bgpio_get_set() call should return a value clamped to [0,1], the current code will return a negative value if reading bit 31, which turns the value negative as this is a signed value and thus gets interpreted as an error by the gpiolib core. Found on the gpio-mxc but applies to any MMIO driver. Cc: stable@vger.kernel.org # 4.3+ Cc: kernel@pengutronix.de Cc: Vladimir Zapolskiy Fixes: e20538b82f1f ("gpio: Propagate errors from chip->get()") Reported-by: Clemens Gruber Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c index bd5193c..88ae70d 100644 --- a/drivers/gpio/gpio-generic.c +++ b/drivers/gpio/gpio-generic.c @@ -141,9 +141,9 @@ static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio) unsigned long pinmask = bgc->pin2mask(bgc, gpio); if (bgc->dir & pinmask) - return bgc->read_reg(bgc->reg_set) & pinmask; + return !!(bgc->read_reg(bgc->reg_set) & pinmask); else - return bgc->read_reg(bgc->reg_dat) & pinmask; + return !!(bgc->read_reg(bgc->reg_dat) & pinmask); } static int bgpio_get(struct gpio_chip *gc, unsigned int gpio) -- cgit v0.10.2 From 45ad7db90b42555c8107f18ec6d6a1e9bce34860 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 17 Dec 2015 10:14:24 +0100 Subject: gpio: revert get() to non-errorprogating behaviour commit e20538b82f1f ("gpio: Propagate errors from chip->get()") started to propagate errors from the .get() functions since we can get errors from the infrastructure of e.g. slowbus GPIO expanders. However it turns out a bunch of drivers relied on the core to clamp the value, so we need to revert to the old behaviour and go over all drivers and fix them to conform to the expectations of the core before we go back to propagating the error code. Cc: stable@vger.kernel.org # 4.3+ Cc: Bjorn Andersson Cc: Vladimir Zapolskiy Fixes: e20538b82f1f ("gpio: Propagate errors from chip->get()") Reported-by: Michael Trimarchi Signed-off-by: Linus Walleij diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 2a91f32..4e4c308 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1279,7 +1279,13 @@ static int _gpiod_get_raw_value(const struct gpio_desc *desc) chip = desc->chip; offset = gpio_chip_hwgpio(desc); value = chip->get ? chip->get(chip, offset) : -EIO; - value = value < 0 ? value : !!value; + /* + * FIXME: fix all drivers to clamp to [0,1] or return negative, + * then change this to: + * value = value < 0 ? value : !!value; + * so we can properly propagate error codes. + */ + value = !!value; trace_gpio_value(desc_to_gpio(desc), 1, value); return value; } -- cgit v0.10.2 From 0b3e6fca4d1af4aa150d32506220f4241323a00c Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Mon, 14 Dec 2015 22:34:05 +0200 Subject: ARM: OMAP2+: am43xx: enable GENERIC_CLOCKEVENTS_BROADCAST System will misbehave in the following case: - AM43XX only build (UP); - CONFIG_CPU_IDLE=y - ARM TWD timer enabled and selected as clockevent device. In the above case, It's expected that broadcast timer will be used as backup timer when CPUIdle will put MPU in low power states where ARM TWD will stop and lose its context. But, the CONFIG_SMP might not be selected when kernel is built for AM43XX SoC only and, as result, GENERIC_CLOCKEVENTS_BROADCAST option will not be selected also. This will break CPUIdle and System will stuck in low power states. Hence, fix it by selecting GENERIC_CLOCKEVENTS_BROADCAST option for AM43XX SoCs always and add empty tick_broadcast() function implementation - no need to send any IPI on UP. After this change timer1 will be selected as broadcast timer the same way as for SMP, and CPUIdle will work properly. Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4b4371d..32a0086 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -65,6 +65,7 @@ config SOC_AM43XX select MACH_OMAP_GENERIC select MIGHT_HAVE_CACHE_L2X0 select HAVE_ARM_SCU + select GENERIC_CLOCKEVENTS_BROADCAST config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b18ebbe..f86692d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -320,6 +320,12 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, return r; } +#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +void tick_broadcast(const struct cpumask *mask) +{ +} +#endif + static void __init omap2_gp_clockevent_init(int gptimer_id, const char *fck_source, const char *property) -- cgit v0.10.2 From 54011103fb457ba8b23aed6699609c0ad65b05fb Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 14 Dec 2015 22:34:06 +0200 Subject: ARM: OMAP2+: AM43xx: select ARM TWD timer Make sure to tell the kernel that AM437x devices have ARM TWD timer. Signed-off-by: Felipe Balbi [grygorii.strashko@ti.com: drop ARM Global timer selection, because it's incompatible with PM (cpuidle/cpufreq). So, it's unsafe to enable it unconditionally] Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 32a0086..0517f0c 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -66,6 +66,7 @@ config SOC_AM43XX select MIGHT_HAVE_CACHE_L2X0 select HAVE_ARM_SCU select GENERIC_CLOCKEVENTS_BROADCAST + select HAVE_ARM_TWD config SOC_DRA7XX bool "TI DRA7XX" -- cgit v0.10.2 From a814a29d7bbfdfe56fe1bb9641a185077066eb9f Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Sun, 29 Nov 2015 16:10:18 +0200 Subject: drm/nouveau/bios/fan: hardcode the fan mode to linear MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is an oversight that made use of the trip-point-based fan managenent on cards that never expose those. This led the fan to stay at fan_min. Fortunately, the emergency code would kick when the temperature would reach 90°C. Reported-by: Tom Englund Tested-by: Tom Englund Signed-off-by: Martin Peres Tested-by: Daemon32 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92126 Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c index 43006db..80fed7e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c @@ -83,6 +83,7 @@ nvbios_fan_parse(struct nvkm_bios *bios, struct nvbios_therm_fan *fan) fan->type = NVBIOS_THERM_FAN_UNK; } + fan->fan_mode = NVBIOS_THERM_FAN_LINEAR; fan->min_duty = nvbios_rd08(bios, data + 0x02); fan->max_duty = nvbios_rd08(bios, data + 0x03); -- cgit v0.10.2 From cc57858831e3e9678291de730c4b4d2e52a19f59 Mon Sep 17 00:00:00 2001 From: Artur Paszkiewicz Date: Fri, 18 Dec 2015 15:19:16 +1100 Subject: md/raid10: fix data corruption and crash during resync The commit c31df25f20e3 ("md/raid10: make sync_request_write() call bio_copy_data()") replaced manual data copying with bio_copy_data() but it doesn't work as intended. The source bio (fbio) is already processed, so its bvec_iter has bi_size == 0 and bi_idx == bi_vcnt. Because of this, bio_copy_data() either does not copy anything, or worse, copies data from the ->bi_next bio if it is set. This causes wrong data to be written to drives during resync and sometimes lockups/crashes in bio_copy_data(): [ 517.338478] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [md126_raid10:3319] [ 517.347324] Modules linked in: raid10 xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables x86_pkg_temp_thermal coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul cryptd shpchp pcspkr ipmi_si ipmi_msghandler tpm_crb acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sr_mod cdrom sd_mod e1000e ax88179_178a usbnet mii ahci ata_generic crc32c_intel libahci ptp pata_acpi libata pps_core wmi sunrpc dm_mirror dm_region_hash dm_log dm_mod [ 517.440555] CPU: 0 PID: 3319 Comm: md126_raid10 Not tainted 4.3.0-rc6+ #1 [ 517.448384] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0055.D14.1509221924 09/22/2015 [ 517.459768] task: ffff880153773980 ti: ffff880150df8000 task.ti: ffff880150df8000 [ 517.468529] RIP: 0010:[] [] bio_copy_data+0xc8/0x3c0 [ 517.478164] RSP: 0018:ffff880150dfbc98 EFLAGS: 00000246 [ 517.484341] RAX: ffff880169356688 RBX: 0000000000001000 RCX: 0000000000000000 [ 517.492558] RDX: 0000000000000000 RSI: ffffea0001ac2980 RDI: ffffea0000d835c0 [ 517.500773] RBP: ffff880150dfbd08 R08: 0000000000000001 R09: ffff880153773980 [ 517.508987] R10: ffff880169356600 R11: 0000000000001000 R12: 0000000000010000 [ 517.517199] R13: 000000000000e000 R14: 0000000000000000 R15: 0000000000001000 [ 517.525412] FS: 0000000000000000(0000) GS:ffff880174a00000(0000) knlGS:0000000000000000 [ 517.534844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 517.541507] CR2: 00007f8a044d5fed CR3: 0000000169504000 CR4: 00000000001406f0 [ 517.549722] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 517.557929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 517.566144] Stack: [ 517.568626] ffff880174a16bc0 ffff880153773980 ffff880169356600 0000000000000000 [ 517.577659] 0000000000000001 0000000000000001 ffff880153773980 ffff88016a61a800 [ 517.586715] ffff880150dfbcf8 0000000000000001 ffff88016dd209e0 0000000000001000 [ 517.595773] Call Trace: [ 517.598747] [] raid10d+0xfc5/0x1690 [raid10] [ 517.605610] [] ? __schedule+0x29e/0x8e2 [ 517.611987] [] md_thread+0x106/0x140 [ 517.618072] [] ? wait_woken+0x80/0x80 [ 517.624252] [] ? super_1_load+0x520/0x520 [ 517.630817] [] kthread+0xc9/0xe0 [ 517.636506] [] ? flush_kthread_worker+0x70/0x70 [ 517.643653] [] ret_from_fork+0x3f/0x70 [ 517.649929] [] ? flush_kthread_worker+0x70/0x70 Signed-off-by: Artur Paszkiewicz Reviewed-by: Shaohua Li Cc: stable@vger.kernel.org (v4.2+) Fixes: c31df25f20e3 ("md/raid10: make sync_request_write() call bio_copy_data()") Signed-off-by: NeilBrown diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 41d70bc..84e597e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1946,6 +1946,8 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) first = i; fbio = r10_bio->devs[i].bio; + fbio->bi_iter.bi_size = r10_bio->sectors << 9; + fbio->bi_iter.bi_idx = 0; vcnt = (r10_bio->sectors + (PAGE_SIZE >> 9) - 1) >> (PAGE_SHIFT - 9); /* now find blocks with errors */ @@ -1989,7 +1991,7 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) bio_reset(tbio); tbio->bi_vcnt = vcnt; - tbio->bi_iter.bi_size = r10_bio->sectors << 9; + tbio->bi_iter.bi_size = fbio->bi_iter.bi_size; tbio->bi_rw = WRITE; tbio->bi_private = r10_bio; tbio->bi_iter.bi_sector = r10_bio->devs[i].addr; -- cgit v0.10.2 From 9b15603dbd98ad1003355ef6ac7d682c75df81c1 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 18 Dec 2015 15:19:16 +1100 Subject: MD: change journal disk role to disk 0 Neil pointed out setting journal disk role to raid_disks will confuse reshape if we support reshape eventually. Switching the role to 0 (we should be fine as long as the value >=0) and skip sysfs file creation to avoid error. Signed-off-by: Shaohua Li Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 807095f..874c843 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1652,7 +1652,7 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev) rdev->journal_tail = le64_to_cpu(sb->journal_tail); if (mddev->recovery_cp == MaxSector) set_bit(MD_JOURNAL_CLEAN, &mddev->flags); - rdev->raid_disk = mddev->raid_disks; + rdev->raid_disk = 0; break; default: rdev->saved_raid_disk = role; diff --git a/drivers/md/md.h b/drivers/md/md.h index 2bea51e..ca0b643 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -566,7 +566,9 @@ static inline char * mdname (struct mddev * mddev) static inline int sysfs_link_rdev(struct mddev *mddev, struct md_rdev *rdev) { char nm[20]; - if (!test_bit(Replacement, &rdev->flags) && mddev->kobj.sd) { + if (!test_bit(Replacement, &rdev->flags) && + !test_bit(Journal, &rdev->flags) && + mddev->kobj.sd) { sprintf(nm, "rd%d", rdev->raid_disk); return sysfs_create_link(&mddev->kobj, &rdev->kobj, nm); } else @@ -576,7 +578,9 @@ static inline int sysfs_link_rdev(struct mddev *mddev, struct md_rdev *rdev) static inline void sysfs_unlink_rdev(struct mddev *mddev, struct md_rdev *rdev) { char nm[20]; - if (!test_bit(Replacement, &rdev->flags) && mddev->kobj.sd) { + if (!test_bit(Replacement, &rdev->flags) && + !test_bit(Journal, &rdev->flags) && + mddev->kobj.sd) { sprintf(nm, "rd%d", rdev->raid_disk); sysfs_remove_link(&mddev->kobj, nm); } -- cgit v0.10.2 From 0dc10e50f219db3f7fd66d35e5d95860ecde4213 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 18 Dec 2015 15:19:16 +1100 Subject: md: fix bug due to nested suspend The patch c7bfced9a6716ff66c9d61f934bb60af08d4688c committed to 4.4-rc causes crash in LVM test shell/lvchange-raid.sh. The kernel crashes with this BUG, the reason is that we attempt to suspend a device that is already suspended. See also https://bugzilla.redhat.com/show_bug.cgi?id=1283491 This patch fixes the bug by changing functions mddev_suspend and mddev_resume to always nest. The number of nested calls to mddev_nested_suspend is kept in the variable mddev->suspended. [neilb: made mddev_suspend() always nest instead of introduce mddev_nested_suspend] kernel BUG at drivers/md/md.c:317! CPU: 3 PID: 32754 Comm: lvm Not tainted 4.4.0-rc2 #1 task: 0000000047076040 ti: 0000000047014000 task.ti: 0000000047014000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001000000000000001111 Not tainted r00-03 000000000804000f 00000000102c5280 0000000010c7522c 000000007e3d1810 r04-07 0000000010c6f000 000000004ef37f20 000000007e3d1dd0 000000007e3d1810 r08-11 000000007c9f1600 0000000000000000 0000000000000001 ffffffffffffffff r12-15 0000000010c1d000 0000000000000041 00000000f98d63c8 00000000f98e49e4 r16-19 00000000f98e49e4 00000000c138fd06 00000000f98d63c8 0000000000000001 r20-23 0000000000000002 000000004ef37f00 00000000000000b0 00000000000001d1 r24-27 00000000424783a0 000000007e3d1dd0 000000007e3d1810 00000000102b2000 r28-31 0000000000000001 0000000047014840 0000000047014930 0000000000000001 sr00-03 0000000007040800 0000000000000000 0000000000000000 0000000007040800 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000102c538c 00000000102c5390 IIR: 03ffe01f ISR: 0000000000000000 IOR: 00000000102b2748 CPU: 3 CR30: 0000000047014000 CR31: 0000000000000000 ORIG_R28: 00000000000000b0 IAOQ[0]: mddev_suspend+0x10c/0x160 [md_mod] IAOQ[1]: mddev_suspend+0x110/0x160 [md_mod] RP(r2): raid1_add_disk+0xd4/0x2c0 [raid1] Backtrace: [<0000000010c7522c>] raid1_add_disk+0xd4/0x2c0 [raid1] [<0000000010c20078>] raid_resume+0x390/0x418 [dm_raid] [<00000000105833e8>] dm_table_resume_targets+0xc0/0x188 [dm_mod] [<000000001057f784>] dm_resume+0x144/0x1e0 [dm_mod] [<0000000010587dd4>] dev_suspend+0x1e4/0x568 [dm_mod] [<0000000010589278>] ctl_ioctl+0x1e8/0x428 [dm_mod] [<0000000010589518>] dm_compat_ctl_ioctl+0x18/0x68 [dm_mod] [<0000000040377b88>] compat_SyS_ioctl+0xd0/0x1558 Fixes: c7bfced9a671 ("md: suspend i/o during runtime blk_integrity_unregister") Signed-off-by: Mikulas Patocka Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 874c843..b79b957 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -314,8 +314,8 @@ static blk_qc_t md_make_request(struct request_queue *q, struct bio *bio) */ void mddev_suspend(struct mddev *mddev) { - BUG_ON(mddev->suspended); - mddev->suspended = 1; + if (mddev->suspended++) + return; synchronize_rcu(); wait_event(mddev->sb_wait, atomic_read(&mddev->active_io) == 0); mddev->pers->quiesce(mddev, 1); @@ -326,7 +326,8 @@ EXPORT_SYMBOL_GPL(mddev_suspend); void mddev_resume(struct mddev *mddev) { - mddev->suspended = 0; + if (--mddev->suspended) + return; wake_up(&mddev->sb_wait); mddev->pers->quiesce(mddev, 0); -- cgit v0.10.2 From cb01c5496d2d9c0c862443561df16ff122db348f Mon Sep 17 00:00:00 2001 From: Goldwyn Rodrigues Date: Fri, 18 Dec 2015 15:19:16 +1100 Subject: Fix remove_and_add_spares removes drive added as spare in slot_store Commit 2910ff17d154baa5eb50e362a91104e831eb2bb6 introduced a regression which would remove a recently added spare via slot_store. Revert part of the patch which touches slot_store() and add the disk directly using pers->hot_add_disk() Fixes: 2910ff17d154 ("md: remove_and_add_spares() to activate specific rdev") Signed-off-by: Goldwyn Rodrigues Signed-off-by: Pawel Baldysiak Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index b79b957..dbedc58 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2774,6 +2774,7 @@ slot_store(struct md_rdev *rdev, const char *buf, size_t len) /* Activating a spare .. or possibly reactivating * if we ever get bitmaps working here. */ + int err; if (rdev->raid_disk != -1) return -EBUSY; @@ -2795,9 +2796,15 @@ slot_store(struct md_rdev *rdev, const char *buf, size_t len) rdev->saved_raid_disk = -1; clear_bit(In_sync, &rdev->flags); clear_bit(Bitmap_sync, &rdev->flags); - remove_and_add_spares(rdev->mddev, rdev); - if (rdev->raid_disk == -1) - return -EBUSY; + err = rdev->mddev->pers-> + hot_add_disk(rdev->mddev, rdev); + if (err) { + rdev->raid_disk = -1; + return err; + } else + sysfs_notify_dirent_safe(rdev->sysfs_state); + if (sysfs_link_rdev(rdev->mddev, rdev)) + /* failure here is OK */; /* don't wakeup anyone, leave that to userspace. */ } else { if (slot >= rdev->mddev->raid_disks && -- cgit v0.10.2 From 3e6db33aaf1d42a30339f831ec4850570d6cc7a3 Mon Sep 17 00:00:00 2001 From: Xiong Zhang Date: Fri, 18 Dec 2015 13:29:18 +0800 Subject: ALSA: hda - Set SKL+ hda controller power at freeze() and thaw() It takes three minutes to enter into hibernation on some OEM SKL machines and we see many codec spurious response after thaw() opertion. This is because HDA is still in D0 state after freeze() call and pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver. It seems bios still access HDA when system enter into freeze state, HDA will receive codec response interrupt immediately after thaw() call. Because of this unexpected interrupt, HDA enter into a abnormal state and slow down the system enter into hibernation. In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and put HDA into D0 state in azx_thaw_noirq(). V2: Only apply this fix to SKL+ Fix compile error when CONFIG_PM_SLEEP isn't defined [Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment by tiwai] Signed-off-by: Xiong Zhang Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index bff5c8b..3b36582 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -954,6 +954,36 @@ static int azx_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP || SUPPORT_VGA_SWITCHEROO */ +#ifdef CONFIG_PM_SLEEP +/* put codec down to D3 at hibernation for Intel SKL+; + * otherwise BIOS may still access the codec and screw up the driver + */ +#define IS_SKL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa170) +#define IS_SKL_LP(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9d70) +#define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98) +#define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci)) + +static int azx_freeze_noirq(struct device *dev) +{ + struct pci_dev *pci = to_pci_dev(dev); + + if (IS_SKL_PLUS(pci)) + pci_set_power_state(pci, PCI_D3hot); + + return 0; +} + +static int azx_thaw_noirq(struct device *dev) +{ + struct pci_dev *pci = to_pci_dev(dev); + + if (IS_SKL_PLUS(pci)) + pci_set_power_state(pci, PCI_D0); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + #ifdef CONFIG_PM static int azx_runtime_suspend(struct device *dev) { @@ -1063,6 +1093,10 @@ static int azx_runtime_idle(struct device *dev) static const struct dev_pm_ops azx_pm = { SET_SYSTEM_SLEEP_PM_OPS(azx_suspend, azx_resume) +#ifdef CONFIG_PM_SLEEP + .freeze_noirq = azx_freeze_noirq, + .thaw_noirq = azx_thaw_noirq, +#endif SET_RUNTIME_PM_OPS(azx_runtime_suspend, azx_runtime_resume, azx_runtime_idle) }; -- cgit v0.10.2 From 036592fbbe753d236402a0ae68148e7c143a0f0e Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Fri, 18 Dec 2015 17:16:17 +1100 Subject: powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" Commit 25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion") fixed an endian bug by calling opal_handle_events() in opal_event_unmask(). However this introduced a deadlock if we find an event is active during unmasking and call opal_handle_events() again. The bad call sequence is: opal_interrupt() -> opal_handle_events() -> generic_handle_irq() -> handle_level_irq() -> raw_spin_lock(&desc->lock) handle_irq_event(desc) unmask_irq(desc) -> opal_event_unmask() -> opal_handle_events() -> generic_handle_irq() -> handle_level_irq() -> raw_spin_lock(&desc->lock) (BOOM) When generating multiple opal events in quick succession this would lead to the following stall warnings: EEH: Fenced PHB#0 detected, location: U78C9.001.WZS09XA-P1-C32 INFO: rcu_sched detected stalls on CPUs/tasks: 12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=2065 15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=2065 (detected by 13, t=2102 jiffies, g=1325, c=1324, q=602) NMI watchdog: BUG: soft lockup - CPU#18 stuck for 22s! [irqbalance:2696] INFO: rcu_sched detected stalls on CPUs/tasks: 12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=8371 15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=8371 (detected by 20, t=8407 jiffies, g=1325, c=1324, q=1290) This patch corrects the problem by queuing the work if an event is active during unmasking, which is similar to the pre-endian fix behaviour. Fixes: 25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion") Signed-off-by: Alistair Popple Reported-by: Andrew Donnellan Signed-off-by: Michael Ellerman diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c index 0a00e2a..e505223b 100644 --- a/arch/powerpc/platforms/powernv/opal-irqchip.c +++ b/arch/powerpc/platforms/powernv/opal-irqchip.c @@ -83,7 +83,19 @@ static void opal_event_unmask(struct irq_data *d) set_bit(d->hwirq, &opal_event_irqchip.mask); opal_poll_events(&events); - opal_handle_events(be64_to_cpu(events)); + last_outstanding_events = be64_to_cpu(events); + + /* + * We can't just handle the events now with opal_handle_events(). + * If we did we would deadlock when opal_event_unmask() is called from + * handle_level_irq() with the irq descriptor lock held, because + * calling opal_handle_events() would call generic_handle_irq() and + * then handle_level_irq() which would try to take the descriptor lock + * again. Instead queue the events for later. + */ + if (last_outstanding_events & opal_event_irqchip.mask) + /* Need to retrigger the interrupt */ + irq_work_queue(&opal_event_irq_work); } static int opal_event_set_type(struct irq_data *d, unsigned int flow_type) -- cgit v0.10.2 From 272fa59ccb4fc802af28b1d699c2463db6a71bf7 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Thu, 17 Dec 2015 19:06:02 +0100 Subject: s390/dis: Fix handling of format specifiers The print_insn() function returns strings like "lghi %r1,0". To escape the '%' character in sprintf() a second '%' is used. For example "lghi %%r1,0" is converted into "lghi %r1,0". After print_insn() the output string is passed to printk(). Because format specifiers like "%r" or "%f" are ignored by printk() this works by chance most of the time. But for instructions with control registers like "lctl %c6,%c6,780" this fails because printk() interprets "%c" as character format specifier. Fix this problem and escape the '%' characters twice. For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf() into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780". Signed-off-by: Michael Holzheu Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index 8140d10..6e72961 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -1920,16 +1920,23 @@ static int print_insn(char *buffer, unsigned char *code, unsigned long addr) } if (separator) ptr += sprintf(ptr, "%c", separator); + /* + * Use four '%' characters below because of the + * following two conversions: + * + * 1) sprintf: %%%%r -> %%r + * 2) printk : %%r -> %r + */ if (operand->flags & OPERAND_GPR) - ptr += sprintf(ptr, "%%r%i", value); + ptr += sprintf(ptr, "%%%%r%i", value); else if (operand->flags & OPERAND_FPR) - ptr += sprintf(ptr, "%%f%i", value); + ptr += sprintf(ptr, "%%%%f%i", value); else if (operand->flags & OPERAND_AR) - ptr += sprintf(ptr, "%%a%i", value); + ptr += sprintf(ptr, "%%%%a%i", value); else if (operand->flags & OPERAND_CR) - ptr += sprintf(ptr, "%%c%i", value); + ptr += sprintf(ptr, "%%%%c%i", value); else if (operand->flags & OPERAND_VR) - ptr += sprintf(ptr, "%%v%i", value); + ptr += sprintf(ptr, "%%%%v%i", value); else if (operand->flags & OPERAND_PCREL) ptr += sprintf(ptr, "%lx", (signed int) value + addr); -- cgit v0.10.2 From aa47e42c60dfa31f81a3fe357451acfe1a12ca1e Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 15 Dec 2015 21:29:16 +0100 Subject: netfilter: nf_tables: use skb->protocol instead of assuming ethernet header Otherwise we may end up with incorrect network and transport header for other protocols. Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_tables_netdev.c b/net/netfilter/nf_tables_netdev.c index 7b9c053..edb3502f 100644 --- a/net/netfilter/nf_tables_netdev.c +++ b/net/netfilter/nf_tables_netdev.c @@ -94,7 +94,7 @@ nft_do_chain_netdev(void *priv, struct sk_buff *skb, { struct nft_pktinfo pkt; - switch (eth_hdr(skb)->h_proto) { + switch (skb->protocol) { case htons(ETH_P_IP): nft_netdev_set_pktinfo_ipv4(&pkt, skb, state); break; -- cgit v0.10.2 From d5f79b6e4d169039903cc869e16e59ad861dd479 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 18 Dec 2015 14:32:07 +0100 Subject: netfilter: nft_ct: include direction when dumping NFT_CT_L3PROTOCOL key one nft userspace test case fails with 'ct l3proto original ipv4' mismatches 'ct l3proto ipv4' ... because NFTA_CT_DIRECTION attr is missing. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c index 8cbca34..9399215 100644 --- a/net/netfilter/nft_ct.c +++ b/net/netfilter/nft_ct.c @@ -366,6 +366,7 @@ static int nft_ct_get_dump(struct sk_buff *skb, const struct nft_expr *expr) goto nla_put_failure; switch (priv->key) { + case NFT_CT_L3PROTOCOL: case NFT_CT_PROTOCOL: case NFT_CT_SRC: case NFT_CT_DST: -- cgit v0.10.2 From 454d5d882c7e412b840e3c99010fe81a9862f6fb Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 30 Oct 2015 14:58:08 +0000 Subject: xen: Add RING_COPY_REQUEST() Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly (i.e., by not considering that the other end may alter the data in the shared ring while it is being inspected). Safe usage of a request generally requires taking a local copy. Provide a RING_COPY_REQUEST() macro to use instead of RING_GET_REQUEST() and an open-coded memcpy(). This takes care of ensuring that the copy is done correctly regardless of any possible compiler optimizations. Use a volatile source to prevent the compiler from reordering or omitting the copy. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h index 7d28aff..7dc685b 100644 --- a/include/xen/interface/io/ring.h +++ b/include/xen/interface/io/ring.h @@ -181,6 +181,20 @@ struct __name##_back_ring { \ #define RING_GET_REQUEST(_r, _idx) \ (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req)) +/* + * Get a local copy of a request. + * + * Use this in preference to RING_GET_REQUEST() so all processing is + * done on a local copy that cannot be modified by the other end. + * + * Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this + * to be ineffective where _req is a struct which consists of only bitfields. + */ +#define RING_COPY_REQUEST(_r, _idx, _req) do { \ + /* Use volatile to force the copy into _req. */ \ + *(_req) = *(volatile typeof(_req))RING_GET_REQUEST(_r, _idx); \ +} while (0) + #define RING_GET_RESPONSE(_r, _idx) \ (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp)) -- cgit v0.10.2 From 0f589967a73f1f30ab4ac4dd9ce0bb399b4d6357 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 30 Oct 2015 15:16:01 +0000 Subject: xen-netback: don't use last request to determine minimum Tx credit The last from guest transmitted request gives no indication about the minimum amount of credit that the guest might need to send a packet since the last packet might have been a small one. Instead allow for the worst case 128 KiB packet. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index e481f37..b683581 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -679,9 +679,7 @@ static void tx_add_credit(struct xenvif_queue *queue) * Allow a burst big enough to transmit a jumbo packet of up to 128kB. * Otherwise the interface can seize up due to insufficient credit. */ - max_burst = RING_GET_REQUEST(&queue->tx, queue->tx.req_cons)->size; - max_burst = min(max_burst, 131072UL); - max_burst = max(max_burst, queue->credit_bytes); + max_burst = max(131072UL, queue->credit_bytes); /* Take care that adding a new chunk of credit doesn't wrap to zero. */ max_credit = queue->remaining_credit + queue->credit_bytes; -- cgit v0.10.2 From 68a33bfd8403e4e22847165d149823a2e0e67c9c Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 30 Oct 2015 15:17:06 +0000 Subject: xen-netback: use RING_COPY_REQUEST() throughout Instead of open-coding memcpy()s and directly accessing Tx and Rx requests, use the new RING_COPY_REQUEST() that ensures the local copy is correct. This is more than is strictly necessary for guest Rx requests since only the id and gref fields are used and it is harmless if the frontend modifies these. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index b683581..1049c34 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -258,18 +258,18 @@ static struct xenvif_rx_meta *get_next_rx_buffer(struct xenvif_queue *queue, struct netrx_pending_operations *npo) { struct xenvif_rx_meta *meta; - struct xen_netif_rx_request *req; + struct xen_netif_rx_request req; - req = RING_GET_REQUEST(&queue->rx, queue->rx.req_cons++); + RING_COPY_REQUEST(&queue->rx, queue->rx.req_cons++, &req); meta = npo->meta + npo->meta_prod++; meta->gso_type = XEN_NETIF_GSO_TYPE_NONE; meta->gso_size = 0; meta->size = 0; - meta->id = req->id; + meta->id = req.id; npo->copy_off = 0; - npo->copy_gref = req->gref; + npo->copy_gref = req.gref; return meta; } @@ -424,7 +424,7 @@ static int xenvif_gop_skb(struct sk_buff *skb, struct xenvif *vif = netdev_priv(skb->dev); int nr_frags = skb_shinfo(skb)->nr_frags; int i; - struct xen_netif_rx_request *req; + struct xen_netif_rx_request req; struct xenvif_rx_meta *meta; unsigned char *data; int head = 1; @@ -443,15 +443,15 @@ static int xenvif_gop_skb(struct sk_buff *skb, /* Set up a GSO prefix descriptor, if necessary */ if ((1 << gso_type) & vif->gso_prefix_mask) { - req = RING_GET_REQUEST(&queue->rx, queue->rx.req_cons++); + RING_COPY_REQUEST(&queue->rx, queue->rx.req_cons++, &req); meta = npo->meta + npo->meta_prod++; meta->gso_type = gso_type; meta->gso_size = skb_shinfo(skb)->gso_size; meta->size = 0; - meta->id = req->id; + meta->id = req.id; } - req = RING_GET_REQUEST(&queue->rx, queue->rx.req_cons++); + RING_COPY_REQUEST(&queue->rx, queue->rx.req_cons++, &req); meta = npo->meta + npo->meta_prod++; if ((1 << gso_type) & vif->gso_mask) { @@ -463,9 +463,9 @@ static int xenvif_gop_skb(struct sk_buff *skb, } meta->size = 0; - meta->id = req->id; + meta->id = req.id; npo->copy_off = 0; - npo->copy_gref = req->gref; + npo->copy_gref = req.gref; data = skb->data; while (data < skb_tail_pointer(skb)) { @@ -709,7 +709,7 @@ static void xenvif_tx_err(struct xenvif_queue *queue, spin_unlock_irqrestore(&queue->response_lock, flags); if (cons == end) break; - txp = RING_GET_REQUEST(&queue->tx, cons++); + RING_COPY_REQUEST(&queue->tx, cons++, txp); } while (1); queue->tx.req_cons = cons; } @@ -776,8 +776,7 @@ static int xenvif_count_requests(struct xenvif_queue *queue, if (drop_err) txp = &dropped_tx; - memcpy(txp, RING_GET_REQUEST(&queue->tx, cons + slots), - sizeof(*txp)); + RING_COPY_REQUEST(&queue->tx, cons + slots, txp); /* If the guest submitted a frame >= 64 KiB then * first->size overflowed and following slots will @@ -1110,8 +1109,7 @@ static int xenvif_get_extras(struct xenvif_queue *queue, return -EBADR; } - memcpy(&extra, RING_GET_REQUEST(&queue->tx, cons), - sizeof(extra)); + RING_COPY_REQUEST(&queue->tx, cons, &extra); if (unlikely(!extra.type || extra.type >= XEN_NETIF_EXTRA_TYPE_MAX)) { queue->tx.req_cons = ++cons; @@ -1320,7 +1318,7 @@ static void xenvif_tx_build_gops(struct xenvif_queue *queue, idx = queue->tx.req_cons; rmb(); /* Ensure that we see the request before we copy it. */ - memcpy(&txreq, RING_GET_REQUEST(&queue->tx, idx), sizeof(txreq)); + RING_COPY_REQUEST(&queue->tx, idx, &txreq); /* Credit-based scheduling. */ if (txreq.size > queue->remaining_credit && -- cgit v0.10.2 From 1f13d75ccb806260079e0679d55d9253e370ec8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Roger=20Pau=20Monn=C3=A9?= Date: Tue, 3 Nov 2015 16:34:09 +0000 Subject: xen-blkback: only read request operation from shared ring once MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A compiler may load a switch statement value multiple times, which could be bad when the value is in memory shared with the frontend. When converting a non-native request to a native one, ensure that src->operation is only loaded once by using READ_ONCE(). This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: Roger Pau Monné Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 68e87a0..c929ae2 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -408,8 +408,8 @@ static inline void blkif_get_x86_32_req(struct blkif_request *dst, struct blkif_x86_32_request *src) { int i, n = BLKIF_MAX_SEGMENTS_PER_REQUEST, j; - dst->operation = src->operation; - switch (src->operation) { + dst->operation = READ_ONCE(src->operation); + switch (dst->operation) { case BLKIF_OP_READ: case BLKIF_OP_WRITE: case BLKIF_OP_WRITE_BARRIER: @@ -456,8 +456,8 @@ static inline void blkif_get_x86_64_req(struct blkif_request *dst, struct blkif_x86_64_request *src) { int i, n = BLKIF_MAX_SEGMENTS_PER_REQUEST, j; - dst->operation = src->operation; - switch (src->operation) { + dst->operation = READ_ONCE(src->operation); + switch (dst->operation) { case BLKIF_OP_READ: case BLKIF_OP_WRITE: case BLKIF_OP_WRITE_BARRIER: -- cgit v0.10.2 From 18779149101c0dd43ded43669ae2a92d21b6f9cb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Roger=20Pau=20Monn=C3=A9?= Date: Tue, 3 Nov 2015 16:40:43 +0000 Subject: xen-blkback: read from indirect descriptors only once MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since indirect descriptors are in memory shared with the frontend, the frontend could alter the first_sect and last_sect values after they have been validated but before they are recorded in the request. This may result in I/O requests that overflow the foreign page, possibly overwriting local pages when the I/O request is executed. When parsing indirect descriptors, only read first_sect and last_sect once. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: Roger Pau Monné Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index f909994..41fb1a9 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -950,6 +950,8 @@ static int xen_blkbk_parse_indirect(struct blkif_request *req, goto unmap; for (n = 0, i = 0; n < nseg; n++) { + uint8_t first_sect, last_sect; + if ((n % SEGS_PER_INDIRECT_FRAME) == 0) { /* Map indirect segments */ if (segments) @@ -957,15 +959,18 @@ static int xen_blkbk_parse_indirect(struct blkif_request *req, segments = kmap_atomic(pages[n/SEGS_PER_INDIRECT_FRAME]->page); } i = n % SEGS_PER_INDIRECT_FRAME; + pending_req->segments[n]->gref = segments[i].gref; - seg[n].nsec = segments[i].last_sect - - segments[i].first_sect + 1; - seg[n].offset = (segments[i].first_sect << 9); - if ((segments[i].last_sect >= (XEN_PAGE_SIZE >> 9)) || - (segments[i].last_sect < segments[i].first_sect)) { + + first_sect = READ_ONCE(segments[i].first_sect); + last_sect = READ_ONCE(segments[i].last_sect); + if (last_sect >= (XEN_PAGE_SIZE >> 9) || last_sect < first_sect) { rc = -EINVAL; goto unmap; } + + seg[n].nsec = last_sect - first_sect + 1; + seg[n].offset = first_sect << 9; preq->nr_sects += seg[n].nsec; } -- cgit v0.10.2 From be69746ec12f35b484707da505c6c76ff06f97dc Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Mon, 16 Nov 2015 18:02:32 +0000 Subject: xen-scsiback: safely copy requests The copy of the ring request was lacking a following barrier(), potentially allowing the compiler to optimize the copy away. Use RING_COPY_REQUEST() to ensure the request is copied to local memory. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Juergen Gross Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c index 9eeefd7..2af9aa8 100644 --- a/drivers/xen/xen-scsiback.c +++ b/drivers/xen/xen-scsiback.c @@ -727,7 +727,7 @@ static int scsiback_do_cmd_fn(struct vscsibk_info *info) if (!pending_req) return 1; - ring_req = *RING_GET_REQUEST(ring, rc); + RING_COPY_REQUEST(ring, rc, &ring_req); ring->req_cons = ++rc; err = prepare_pending_reqs(info, &ring_req, pending_req); -- cgit v0.10.2 From 8135cf8b092723dbfcc611fe6fdcb3a36c9951c5 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 16 Nov 2015 12:40:48 -0500 Subject: xen/pciback: Save xen_pci_op commands before processing it Double fetch vulnerabilities that happen when a variable is fetched twice from shared memory but a security check is only performed the first time. The xen_pcibk_do_op function performs a switch statements on the op->cmd value which is stored in shared memory. Interestingly this can result in a double fetch vulnerability depending on the performed compiler optimization. This patch fixes it by saving the xen_pci_op command before processing it. We also use 'barrier' to make sure that the compiler does not perform any optimization. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Konrad Rzeszutek Wilk Signed-off-by: Jan Beulich Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/pciback.h b/drivers/xen/xen-pciback/pciback.h index 58e38d5..4d529f3 100644 --- a/drivers/xen/xen-pciback/pciback.h +++ b/drivers/xen/xen-pciback/pciback.h @@ -37,6 +37,7 @@ struct xen_pcibk_device { struct xen_pci_sharedinfo *sh_info; unsigned long flags; struct work_struct op_work; + struct xen_pci_op op; }; struct xen_pcibk_dev_data { diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c index c4a0666..a0e0e3e 100644 --- a/drivers/xen/xen-pciback/pciback_ops.c +++ b/drivers/xen/xen-pciback/pciback_ops.c @@ -298,9 +298,11 @@ void xen_pcibk_do_op(struct work_struct *data) container_of(data, struct xen_pcibk_device, op_work); struct pci_dev *dev; struct xen_pcibk_dev_data *dev_data = NULL; - struct xen_pci_op *op = &pdev->sh_info->op; + struct xen_pci_op *op = &pdev->op; int test_intx = 0; + *op = pdev->sh_info->op; + barrier(); dev = xen_pcibk_get_pci_dev(pdev, op->domain, op->bus, op->devfn); if (dev == NULL) @@ -342,6 +344,17 @@ void xen_pcibk_do_op(struct work_struct *data) if ((dev_data->enable_intx != test_intx)) xen_pcibk_control_isr(dev, 0 /* no reset */); } + pdev->sh_info->op.err = op->err; + pdev->sh_info->op.value = op->value; +#ifdef CONFIG_PCI_MSI + if (op->cmd == XEN_PCI_OP_enable_msix && op->err == 0) { + unsigned int i; + + for (i = 0; i < op->value; i++) + pdev->sh_info->op.msix_entries[i].vector = + op->msix_entries[i].vector; + } +#endif /* Tell the driver domain that we're done. */ wmb(); clear_bit(_XEN_PCIF_active, (unsigned long *)&pdev->sh_info->flags); -- cgit v0.10.2 From 56441f3c8e5bd45aab10dd9f8c505dd4bec03b0d Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 3 Apr 2015 11:08:22 -0400 Subject: xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled The guest sequence of: a) XEN_PCI_OP_enable_msi b) XEN_PCI_OP_enable_msi c) XEN_PCI_OP_disable_msi results in hitting an BUG_ON condition in the msi.c code. The MSI code uses an dev->msi_list to which it adds MSI entries. Under the above conditions an BUG_ON() can be hit. The device passed in the guest MUST have MSI capability. The a) adds the entry to the dev->msi_list and sets msi_enabled. The b) adds a second entry but adding in to SysFS fails (duplicate entry) and deletes all of the entries from msi_list and returns (with msi_enabled is still set). c) pci_disable_msi passes the msi_enabled checks and hits: BUG_ON(list_empty(dev_to_msi_list(&dev->dev))); and blows up. The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard against that. The check for msix_enabled is not stricly neccessary. This is part of XSA-157. CC: stable@vger.kernel.org Reviewed-by: David Vrabel Reviewed-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c index a0e0e3e..8bfb87c 100644 --- a/drivers/xen/xen-pciback/pciback_ops.c +++ b/drivers/xen/xen-pciback/pciback_ops.c @@ -144,7 +144,12 @@ int xen_pcibk_enable_msi(struct xen_pcibk_device *pdev, if (unlikely(verbose_request)) printk(KERN_DEBUG DRV_NAME ": %s: enable MSI\n", pci_name(dev)); - status = pci_enable_msi(dev); + if (dev->msi_enabled) + status = -EALREADY; + else if (dev->msix_enabled) + status = -ENXIO; + else + status = pci_enable_msi(dev); if (status) { pr_warn_ratelimited("%s: error enabling MSI for guest %u: err %d\n", -- cgit v0.10.2 From 5e0ce1455c09dd61d029b8ad45d82e1ac0b6c4c9 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 2 Nov 2015 18:07:44 -0500 Subject: xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled The guest sequence of: a) XEN_PCI_OP_enable_msix b) XEN_PCI_OP_enable_msix results in hitting an NULL pointer due to using freed pointers. The device passed in the guest MUST have MSI-X capability. The a) constructs and SysFS representation of MSI and MSI groups. The b) adds a second set of them but adding in to SysFS fails (duplicate entry). 'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that in a) pdev->msi_irq_groups is still set) and also free's ALL of the MSI-X entries of the device (the ones allocated in step a) and b)). The unwind code: 'free_msi_irqs' deletes all the entries and tries to delete the pdev->msi_irq_groups (which hasn't been set to NULL). However the pointers in the SysFS are already freed and we hit an NULL pointer further on when 'strlen' is attempted on a freed pointer. The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard against that. The check for msi_enabled is not stricly neccessary. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel Reviewed-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c index 8bfb87c..029f33d 100644 --- a/drivers/xen/xen-pciback/pciback_ops.c +++ b/drivers/xen/xen-pciback/pciback_ops.c @@ -206,9 +206,16 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev, if (unlikely(verbose_request)) printk(KERN_DEBUG DRV_NAME ": %s: enable MSI-X\n", pci_name(dev)); + if (op->value > SH_INFO_MAX_VEC) return -EINVAL; + if (dev->msix_enabled) + return -EALREADY; + + if (dev->msi_enabled) + return -ENXIO; + entries = kmalloc(op->value * sizeof(*entries), GFP_KERNEL); if (entries == NULL) return -ENOMEM; -- cgit v0.10.2 From a396f3a210c3a61e94d6b87ec05a75d0be2a60d0 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 2 Nov 2015 17:24:08 -0500 Subject: xen/pciback: Do not install an IRQ handler for MSI interrupts. Otherwise an guest can subvert the generic MSI code to trigger an BUG_ON condition during MSI interrupt freeing: for (i = 0; i < entry->nvec_used; i++) BUG_ON(irq_has_action(entry->irq + i)); Xen PCI backed installs an IRQ handler (request_irq) for the dev->irq whenever the guest writes PCI_COMMAND_MEMORY (or PCI_COMMAND_IO) to the PCI_COMMAND register. This is done in case the device has legacy interrupts the GSI line is shared by the backend devices. To subvert the backend the guest needs to make the backend to change the dev->irq from the GSI to the MSI interrupt line, make the backend allocate an interrupt handler, and then command the backend to free the MSI interrupt and hit the BUG_ON. Since the backend only calls 'request_irq' when the guest writes to the PCI_COMMAND register the guest needs to call XEN_PCI_OP_enable_msi before any other operation. This will cause the generic MSI code to setup an MSI entry and populate dev->irq with the new PIRQ value. Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY and cause the backend to setup an IRQ handler for dev->irq (which instead of the GSI value has the MSI pirq). See 'xen_pcibk_control_isr'. Then the guest disables the MSI: XEN_PCI_OP_disable_msi which ends up triggering the BUG_ON condition in 'free_msi_irqs' as there is an IRQ handler for the entry->irq (dev->irq). Note that this cannot be done using MSI-X as the generic code does not over-write dev->irq with the MSI-X PIRQ values. The patch inhibits setting up the IRQ handler if MSI or MSI-X (for symmetry reasons) code had been called successfully. P.S. Xen PCIBack when it sets up the device for the guest consumption ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device). XSA-120 addendum patch removed that - however when upstreaming said addendum we found that it caused issues with qemu upstream. That has now been fixed in qemu upstream. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c index 029f33d..d0696ce 100644 --- a/drivers/xen/xen-pciback/pciback_ops.c +++ b/drivers/xen/xen-pciback/pciback_ops.c @@ -70,6 +70,13 @@ static void xen_pcibk_control_isr(struct pci_dev *dev, int reset) enable ? "enable" : "disable"); if (enable) { + /* + * The MSI or MSI-X should not have an IRQ handler. Otherwise + * if the guest terminates we BUG_ON in free_msi_irqs. + */ + if (dev->msi_enabled || dev->msix_enabled) + goto out; + rc = request_irq(dev_data->irq, xen_pcibk_guest_interrupt, IRQF_SHARED, dev_data->irq_name, dev); -- cgit v0.10.2 From 7cfb905b9638982862f0331b36ccaaca5d383b49 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 1 Apr 2015 10:49:47 -0400 Subject: xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. Otherwise just continue on, returning the same values as previously (return of 0, and op->result has the PIRQ value). This does not change the behavior of XEN_PCI_OP_disable_msi[|x]. The pci_disable_msi or pci_disable_msix have the checks for msi_enabled or msix_enabled so they will error out immediately. However the guest can still call these operations and cause us to disable the 'ack_intr'. That means the backend IRQ handler for the legacy interrupt will not respond to interrupts anymore. This will lead to (if the device is causing an interrupt storm) for the Linux generic code to disable the interrupt line. Naturally this will only happen if the device in question is plugged in on the motherboard on shared level interrupt GSI. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c index d0696ce..4ee5fc0 100644 --- a/drivers/xen/xen-pciback/pciback_ops.c +++ b/drivers/xen/xen-pciback/pciback_ops.c @@ -185,20 +185,23 @@ static int xen_pcibk_disable_msi(struct xen_pcibk_device *pdev, struct pci_dev *dev, struct xen_pci_op *op) { - struct xen_pcibk_dev_data *dev_data; - if (unlikely(verbose_request)) printk(KERN_DEBUG DRV_NAME ": %s: disable MSI\n", pci_name(dev)); - pci_disable_msi(dev); + if (dev->msi_enabled) { + struct xen_pcibk_dev_data *dev_data; + + pci_disable_msi(dev); + + dev_data = pci_get_drvdata(dev); + if (dev_data) + dev_data->ack_intr = 1; + } op->value = dev->irq ? xen_pirq_from_irq(dev->irq) : 0; if (unlikely(verbose_request)) printk(KERN_DEBUG DRV_NAME ": %s: MSI: %d\n", pci_name(dev), op->value); - dev_data = pci_get_drvdata(dev); - if (dev_data) - dev_data->ack_intr = 1; return 0; } @@ -264,23 +267,27 @@ static int xen_pcibk_disable_msix(struct xen_pcibk_device *pdev, struct pci_dev *dev, struct xen_pci_op *op) { - struct xen_pcibk_dev_data *dev_data; if (unlikely(verbose_request)) printk(KERN_DEBUG DRV_NAME ": %s: disable MSI-X\n", pci_name(dev)); - pci_disable_msix(dev); + if (dev->msix_enabled) { + struct xen_pcibk_dev_data *dev_data; + + pci_disable_msix(dev); + + dev_data = pci_get_drvdata(dev); + if (dev_data) + dev_data->ack_intr = 1; + } /* * SR-IOV devices (which don't have any legacy IRQ) have * an undefined IRQ value of zero. */ op->value = dev->irq ? xen_pirq_from_irq(dev->irq) : 0; if (unlikely(verbose_request)) - printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n", pci_name(dev), - op->value); - dev_data = pci_get_drvdata(dev); - if (dev_data) - dev_data->ack_intr = 1; + printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n", + pci_name(dev), op->value); return 0; } #endif -- cgit v0.10.2 From 408fb0e5aa7fda0059db282ff58c3b2a4278baa0 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 2 Nov 2015 18:13:27 -0500 Subject: xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. commit f598282f51 ("PCI: Fix the NIU MSI-X problem in a better way") teaches us that dealing with MSI-X can be troublesome. Further checks in the MSI-X architecture shows that if the PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we may not be able to access the BAR (since they are memory regions). Since the MSI-X tables are located in there.. that can lead to us causing PCIe errors. Inhibit us performing any operation on the MSI-X unless the MEMORY bit is set. Note that Xen hypervisor with: "x86/MSI-X: access MSI-X table only after having enabled MSI-X" will return: xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3! When the generic MSI code tries to setup the PIRQ without MEMORY bit set. Which means with later versions of Xen (4.6) this patch is not neccessary. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c index 4ee5fc0..73dafdc 100644 --- a/drivers/xen/xen-pciback/pciback_ops.c +++ b/drivers/xen/xen-pciback/pciback_ops.c @@ -212,6 +212,7 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev, struct xen_pcibk_dev_data *dev_data; int i, result; struct msix_entry *entries; + u16 cmd; if (unlikely(verbose_request)) printk(KERN_DEBUG DRV_NAME ": %s: enable MSI-X\n", @@ -223,7 +224,12 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev, if (dev->msix_enabled) return -EALREADY; - if (dev->msi_enabled) + /* + * PCI_COMMAND_MEMORY must be enabled, otherwise we may not be able + * to access the BARs where the MSI-X entries reside. + */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (dev->msi_enabled || !(cmd & PCI_COMMAND_MEMORY)) return -ENXIO; entries = kmalloc(op->value * sizeof(*entries), GFP_KERNEL); -- cgit v0.10.2 From 3e3f8bd569558acefdfaae273d71f7a29b8c0b4f Mon Sep 17 00:00:00 2001 From: Zidan Wang Date: Fri, 18 Dec 2015 16:53:41 +0800 Subject: ASoC: fsl_sai: fix no frame clk in master mode After several open/close sai test with ctrl+c, there will be I/O error. The SAI can't work anymore, can't recover. There will be no frame clock. With adding the software reset in trigger stop, the issue can be fixed. This is a hardware bug/errata and reset is the only option. According to the reference manual, the software reset doesn't reset any control register but only internal hardware logics such as bit clock generator, status flags, and FIFO pointers. (Our purpose is just to reset the clock generator while the software reset is the only way to do that.) Since slave mode doesn't use the clock generator, only apply the reset procedure to the master mode. For asynchronous mode, TX will not be reset when RX is still running. In this case, i can't reproduce this issue. Signed-off-by: Zidan Wang Acked-by: Nicolin Chen Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index a4435f5..a31f0ba 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -504,6 +504,24 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd, FSL_SAI_CSR_FR, FSL_SAI_CSR_FR); regmap_update_bits(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_FR, FSL_SAI_CSR_FR); + + /* + * For sai master mode, after several open/close sai, + * there will be no frame clock, and can't recover + * anymore. Add software reset to fix this issue. + * This is a hardware bug, and will be fix in the + * next sai version. + */ + if (!sai->is_slave_mode) { + /* Software Reset for both Tx and Rx */ + regmap_write(sai->regmap, + FSL_SAI_TCSR, FSL_SAI_CSR_SR); + regmap_write(sai->regmap, + FSL_SAI_RCSR, FSL_SAI_CSR_SR); + /* Clear SR bit to finish the reset */ + regmap_write(sai->regmap, FSL_SAI_TCSR, 0); + regmap_write(sai->regmap, FSL_SAI_RCSR, 0); + } } break; default: -- cgit v0.10.2 From a3a316cfc41ab3e7b9e0079338f8ea9dff911d88 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 18 Dec 2015 15:52:28 +0100 Subject: hwmon: (sht15) Select CONFIG_BITREVERSE If CONFIG_BITREVERSE is not built-in, the sht15 driver fails to link: drivers/built-in.o: In function `sht15_crc8': drivers/hwmon/sht15.c:195: undefined reference to `byte_rev_table' This adds a Kconfig 'select' statement, like all other users of bitrev.h have it. Signed-off-by: Arnd Bergmann Fixes: 33836ee98533 ("hwmon:change sht15_reverse()") Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 8f59f05..80a73bf 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1217,6 +1217,7 @@ config SENSORS_PWM_FAN config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST + select BITREVERSE help If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. -- cgit v0.10.2 From 584a561a6fee0d258f9ca644f58b73d9a41b8a46 Mon Sep 17 00:00:00 2001 From: Doug Goldstein Date: Thu, 26 Nov 2015 14:32:39 -0600 Subject: xen-pciback: fix up cleanup path when alloc fails When allocating a pciback device fails, clear the private field. This could lead to an use-after free, however the 'really_probe' takes care of setting dev_set_drvdata(dev, NULL) in its failure path (which we would exercise if the ->probe function failed), so we we are OK. However lets be defensive as the code can change. Going forward we should clean up the pci_set_drvdata(dev, NULL) in the various code-base. That will be for another day. Reviewed-by: Boris Ostrovsky Reported-by: Jonathan Creekmore Signed-off-by: Doug Goldstein Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/xen-pciback/xenbus.c b/drivers/xen/xen-pciback/xenbus.c index 98bc345..4843741 100644 --- a/drivers/xen/xen-pciback/xenbus.c +++ b/drivers/xen/xen-pciback/xenbus.c @@ -44,7 +44,6 @@ static struct xen_pcibk_device *alloc_pdev(struct xenbus_device *xdev) dev_dbg(&xdev->dev, "allocated pdev @ 0x%p\n", pdev); pdev->xdev = xdev; - dev_set_drvdata(&xdev->dev, pdev); mutex_init(&pdev->dev_lock); @@ -58,6 +57,9 @@ static struct xen_pcibk_device *alloc_pdev(struct xenbus_device *xdev) kfree(pdev); pdev = NULL; } + + dev_set_drvdata(&xdev->dev, pdev); + out: return pdev; } -- cgit v0.10.2 From dfcf36d90489a403d8d833f0f73d84a8d68b5570 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 11 Nov 2015 09:22:36 -0200 Subject: [media] Revert "[media] ivtv: avoid going past input/audio array" This patch broke ivtv logic, as reported at https://bugzilla.redhat.com/show_bug.cgi?id=1278942 This reverts commit 09290cc885937cab3b2d60a6d48fe3d2d3e04061. Cc: stable@vger.kernel.org # for v4.1 and upper Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/pci/ivtv/ivtv-driver.c b/drivers/media/pci/ivtv/ivtv-driver.c index 8616fa8..c2e60b4 100644 --- a/drivers/media/pci/ivtv/ivtv-driver.c +++ b/drivers/media/pci/ivtv/ivtv-driver.c @@ -805,11 +805,11 @@ static void ivtv_init_struct2(struct ivtv *itv) { int i; - for (i = 0; i < IVTV_CARD_MAX_VIDEO_INPUTS - 1; i++) + for (i = 0; i < IVTV_CARD_MAX_VIDEO_INPUTS; i++) if (itv->card->video_inputs[i].video_type == 0) break; itv->nof_inputs = i; - for (i = 0; i < IVTV_CARD_MAX_AUDIO_INPUTS - 1; i++) + for (i = 0; i < IVTV_CARD_MAX_AUDIO_INPUTS; i++) if (itv->card->audio_inputs[i].audio_type == 0) break; itv->nof_audio_inputs = i; -- cgit v0.10.2 From eb35cf47c386fa2088580ff4f450abe8a6f9402e Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 21 Oct 2015 19:02:41 -0200 Subject: [media] hackrf: fix possible null ptr on debug printing drivers/media/usb/hackrf/hackrf.c:1533 hackrf_probe() error: we previously assumed 'dev' could be null (see line 1366) Reported-by: Dan Carpenter Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/hackrf/hackrf.c b/drivers/media/usb/hackrf/hackrf.c index e05bfec..84e8a42 100644 --- a/drivers/media/usb/hackrf/hackrf.c +++ b/drivers/media/usb/hackrf/hackrf.c @@ -1530,7 +1530,7 @@ err_v4l2_ctrl_handler_free_rx: err_kfree: kfree(dev); err: - dev_dbg(dev->dev, "failed=%d\n", ret); + dev_dbg(&intf->dev, "failed=%d\n", ret); return ret; } -- cgit v0.10.2 From d47fa5315cca0c7c06b97abfbd77859d5296be2c Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 23 Oct 2015 20:01:31 -0200 Subject: [media] hackrf: move RF gain ctrl enable behind module parameter Used Avago MGA-81563 RF amplifier could be destroyed pretty easily with too strong signal or transmitting to bad antenna. Add module parameter 'enable_rf_gain_ctrl' which allows enabling RF gain control - otherwise, default without the module parameter, RF gain control is set to 'grabbed' state which prevents setting value to the control. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/hackrf/hackrf.c b/drivers/media/usb/hackrf/hackrf.c index 84e8a42..0fe5cb2 100644 --- a/drivers/media/usb/hackrf/hackrf.c +++ b/drivers/media/usb/hackrf/hackrf.c @@ -24,6 +24,15 @@ #include #include +/* + * Used Avago MGA-81563 RF amplifier could be destroyed pretty easily with too + * strong signal or transmitting to bad antenna. + * Set RF gain control to 'grabbed' state by default for sure. + */ +static bool hackrf_enable_rf_gain_ctrl; +module_param_named(enable_rf_gain_ctrl, hackrf_enable_rf_gain_ctrl, bool, 0644); +MODULE_PARM_DESC(enable_rf_gain_ctrl, "enable RX/TX RF amplifier control (warn: could damage amplifier)"); + /* HackRF USB API commands (from HackRF Library) */ enum { CMD_SET_TRANSCEIVER_MODE = 0x01, @@ -1451,6 +1460,7 @@ static int hackrf_probe(struct usb_interface *intf, dev_err(dev->dev, "Could not initialize controls\n"); goto err_v4l2_ctrl_handler_free_rx; } + v4l2_ctrl_grab(dev->rx_rf_gain, !hackrf_enable_rf_gain_ctrl); v4l2_ctrl_handler_setup(&dev->rx_ctrl_handler); /* Register controls for transmitter */ @@ -1471,6 +1481,7 @@ static int hackrf_probe(struct usb_interface *intf, dev_err(dev->dev, "Could not initialize controls\n"); goto err_v4l2_ctrl_handler_free_tx; } + v4l2_ctrl_grab(dev->tx_rf_gain, !hackrf_enable_rf_gain_ctrl); v4l2_ctrl_handler_setup(&dev->tx_ctrl_handler); /* Register the v4l2_device structure */ -- cgit v0.10.2 From aa0850e1d56623845b46350ffd971afa9241886d Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 26 Oct 2015 18:58:14 -0200 Subject: [media] airspy: increase USB control message buffer size Driver requested device firmware version string during probe using only 24 byte long buffer. That buffer is too small for newer firmware versions, which causes device firmware hang - device stops responding to any commands after that. Increase buffer size to 128 which should be enough for any current and future version strings. Link: https://github.com/airspy/host/issues/27 Cc: # 3.17+ Reported-by: Benjamin Vernoux Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/airspy/airspy.c b/drivers/media/usb/airspy/airspy.c index fcbb497..565a593 100644 --- a/drivers/media/usb/airspy/airspy.c +++ b/drivers/media/usb/airspy/airspy.c @@ -134,7 +134,7 @@ struct airspy { int urbs_submitted; /* USB control message buffer */ - #define BUF_SIZE 24 + #define BUF_SIZE 128 u8 buf[BUF_SIZE]; /* Current configuration */ -- cgit v0.10.2 From abdc9a3b4bac97add99e1d77dc6d28623afe682b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 16 Dec 2015 14:06:37 +0300 Subject: USB: ipaq.c: fix a timeout loop The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index f51a5d5..ec1b8f2 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -531,7 +531,8 @@ static int ipaq_open(struct tty_struct *tty, * through. Since this has a reasonably high failure rate, we retry * several times. */ - while (retries--) { + while (retries) { + retries--; result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21, 0x1, 0, NULL, 0, 100); -- cgit v0.10.2 From e50293ef9775c5f1cf3fcc093037dd6a8c5684ea Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 16 Dec 2015 13:32:38 -0500 Subject: USB: fix invalid memory access in hub_activate() Commit 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by: Alan Stern Reported-by: Alexandru Cornea Tested-by: Alexandru Cornea Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a5cc032..ddbf32d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1035,10 +1035,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) unsigned delay; /* Continue a partial initialization */ - if (type == HUB_INIT2) - goto init2; - if (type == HUB_INIT3) + if (type == HUB_INIT2 || type == HUB_INIT3) { + device_lock(hub->intfdev); + + /* Was the hub disconnected while we were waiting? */ + if (hub->disconnected) { + device_unlock(hub->intfdev); + kref_put(&hub->kref, hub_release); + return; + } + if (type == HUB_INIT2) + goto init2; goto init3; + } + kref_get(&hub->kref); /* The superspeed hub except for root hub has to use Hub Depth * value as an offset into the route string to locate the bits @@ -1236,6 +1246,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) queue_delayed_work(system_power_efficient_wq, &hub->init_work, msecs_to_jiffies(delay)); + device_unlock(hub->intfdev); return; /* Continues at init3: below */ } else { msleep(delay); @@ -1257,6 +1268,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Allow autosuspend if it was suppressed */ if (type <= HUB_INIT3) usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); + + if (type == HUB_INIT2 || type == HUB_INIT3) + device_unlock(hub->intfdev); + + kref_put(&hub->kref, hub_release); } /* Implement the continuations for the delays above */ -- cgit v0.10.2 From 1873c58d4a45bd4d7104ba1482fcd9c3bd094cd1 Mon Sep 17 00:00:00 2001 From: "Pascal Speck (Iktek)" Date: Fri, 4 Dec 2015 16:55:17 +0100 Subject: ethernet:ti:cpsw: fix phy identification with multiple slaves on fixed-phy When using more than one slave with ti cpsw and fixed phy the pd->phy_id will be always zero, but slave_data->phy_id must be unique. pd->phy_id means a "phy hardware id" whereas slave_data->phy_id means an "unique id", so we should use pd->addr which has the same unique meaning. Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: Pascal Speck Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 48b92c9..e3b220d 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2047,7 +2047,7 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, if (!pd) return -ENODEV; snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, pd->bus->id, pd->phy_id); + PHY_ID_FMT, pd->bus->id, pd->addr); goto no_phy_slave; } parp = of_get_property(slave_node, "phy_id", &lenp); -- cgit v0.10.2 From f1eea5c15ae799a1291f0f481fa3ea09be913fa9 Mon Sep 17 00:00:00 2001 From: David Rivshin Date: Wed, 16 Dec 2015 23:02:10 -0500 Subject: drivers: net: cpsw: fix RMII/RGMII mode when used with fixed-link PHY Commit 1f71e8c96fc654724723ce987e0a8b2aeb81746d ("drivers: net: cpsw: Add support for fixed-link PHY") did not parse the "phy-mode" property in the case of a fixed-link PHY, leaving slave_data->phy_if with its default of PHY_INTERFACE_MODE_NA(0). This later gets passed to phy_connect() in cpsw_slave_open(), and eventually to cpsw_phy_sel() where it hits a default case that configures the MAC for MII mode. The user visible symptom is that while kernel log messages seem to indicate that the interface is set up, there is no network communication. Eventually a watchdog error occurs: NETDEV WATCHDOG: eth0 (cpsw): transmit queue 0 timed out Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: David Rivshin Signed-off-by: David S. Miller diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 9853f8e..28a4781 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -40,18 +40,18 @@ Optional properties: Slave Properties: Required properties: -- phy_id : Specifies slave phy id - phy-mode : See ethernet.txt file in the same directory Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports - mac-address : See ethernet.txt file in the same directory +- phy_id : Specifies slave phy id - phy-handle : See ethernet.txt file in the same directory Slave sub-nodes: - fixed-link : See fixed-link.txt file in the same directory - Either the properties phy_id and phy-mode, - or the sub-node fixed-link can be specified + Either the property phy_id, or the sub-node + fixed-link can be specified Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index e3b220d..bc6d20d 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2026,17 +2026,15 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, for_each_child_of_node(node, slave_node) { struct cpsw_slave_data *slave_data = data->slave_data + i; const void *mac_addr = NULL; - u32 phyid; int lenp; const __be32 *parp; - struct device_node *mdio_node; - struct platform_device *mdio; /* This is no slave child node, continue */ if (strcmp(slave_node->name, "slave")) continue; priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0); + parp = of_get_property(slave_node, "phy_id", &lenp); if (of_phy_is_fixed_link(slave_node)) { struct phy_device *pd; @@ -2048,23 +2046,29 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, return -ENODEV; snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), PHY_ID_FMT, pd->bus->id, pd->addr); + } else if (parp) { + u32 phyid; + struct device_node *mdio_node; + struct platform_device *mdio; + + if (lenp != (sizeof(__be32) * 2)) { + dev_err(&pdev->dev, "Invalid slave[%d] phy_id property\n", i); + goto no_phy_slave; + } + mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); + phyid = be32_to_cpup(parp+1); + mdio = of_find_device_by_node(mdio_node); + of_node_put(mdio_node); + if (!mdio) { + dev_err(&pdev->dev, "Missing mdio platform device\n"); + return -EINVAL; + } + snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), + PHY_ID_FMT, mdio->name, phyid); + } else { + dev_err(&pdev->dev, "No slave[%d] phy_id or fixed-link property\n", i); goto no_phy_slave; } - parp = of_get_property(slave_node, "phy_id", &lenp); - if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) { - dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i); - goto no_phy_slave; - } - mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); - phyid = be32_to_cpup(parp+1); - mdio = of_find_device_by_node(mdio_node); - of_node_put(mdio_node); - if (!mdio) { - dev_err(&pdev->dev, "Missing mdio platform device\n"); - return -EINVAL; - } - snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, mdio->name, phyid); slave_data->phy_if = of_get_phy_mode(slave_node); if (slave_data->phy_if < 0) { dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n", -- cgit v0.10.2 From dfc0a6d39aad6d633141726eb2e37e15bda1fccd Mon Sep 17 00:00:00 2001 From: David Rivshin Date: Wed, 16 Dec 2015 23:02:11 -0500 Subject: drivers: net: cpsw: increment reference count on fixed-link PHY node When a fixed-link sub-node exists in a slave node, the slave node is also the PHY node. Since this is a separate use of the slave node, of_node_get() should be used to increment the reference count. Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: David Rivshin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index bc6d20d..3b489ca 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2036,16 +2036,21 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0); parp = of_get_property(slave_node, "phy_id", &lenp); if (of_phy_is_fixed_link(slave_node)) { - struct phy_device *pd; + struct device_node *phy_node; + struct phy_device *phy_dev; + /* In the case of a fixed PHY, the DT node associated + * to the PHY is the Ethernet MAC DT node. + */ ret = of_phy_register_fixed_link(slave_node); if (ret) return ret; - pd = of_phy_find_device(slave_node); - if (!pd) + phy_node = of_node_get(slave_node); + phy_dev = of_phy_find_device(phy_node); + if (!phy_dev) return -ENODEV; snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, pd->bus->id, pd->addr); + PHY_ID_FMT, phy_dev->bus->id, phy_dev->addr); } else if (parp) { u32 phyid; struct device_node *mdio_node; -- cgit v0.10.2 From fc9f5ea9b4ecbe9b7839c92f0a54261809c723d3 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Thu, 17 Dec 2015 15:35:37 +0200 Subject: net/mlx4_en: Remove dependency between timestamping capability and service_task Service task is responsible for other tasks in addition to timestamping overflow check. Launch it even if timestamping is not supported by device. Fixes: 07841f9d94c1 ('net/mlx4_en: Schedule napi when RX buffers allocation fails') Signed-off-by: Eugenia Emantayev Signed-off-by: Eran Ben Elisha Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 886e1bc..4eef316 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -3058,9 +3058,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, } queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY); - if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) - queue_delayed_work(mdev->workqueue, &priv->service_task, - SERVICE_TASK_DELAY); + queue_delayed_work(mdev->workqueue, &priv->service_task, + SERVICE_TASK_DELAY); mlx4_en_set_stats_bitmap(mdev->dev, &priv->stats_bitmap, mdev->profile.prof[priv->port].rx_ppp, -- cgit v0.10.2 From 90683061dd50b0d70f01466c2d694f4e928a86f3 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Thu, 17 Dec 2015 15:35:38 +0200 Subject: net/mlx4_en: Fix HW timestamp init issue upon system startup mlx4_en_init_timestamp was called before creation of netdev and port init, thus used uninitialized values. Specifically - NIC frequency was incorrect causing wrong calculations and later wrong HW timestamps. Fixes: 1ec4864b1017 ('net/mlx4_en: Fixed crash when port type is changed') Signed-off-by: Eugenia Emantayev Signed-off-by: Marina Varshaver Signed-off-by: Eran Ben Elisha Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c index 8a083d7..038f9ce 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c @@ -242,6 +242,13 @@ void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) unsigned long flags; u64 ns, zero = 0; + /* mlx4_en_init_timestamp is called for each netdev. + * mdev->ptp_clock is common for all ports, skip initialization if + * was done for other port. + */ + if (mdev->ptp_clock) + return; + rwlock_init(&mdev->clock_lock); memset(&mdev->cycles, 0, sizeof(mdev->cycles)); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index 005f910..e0ec280 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -232,9 +232,6 @@ static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr) if (mdev->pndev[i]) mlx4_en_destroy_netdev(mdev->pndev[i]); - if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) - mlx4_en_remove_timestamp(mdev); - flush_workqueue(mdev->workqueue); destroy_workqueue(mdev->workqueue); (void) mlx4_mr_free(dev, &mdev->mr); @@ -320,10 +317,6 @@ static void *mlx4_en_add(struct mlx4_dev *dev) mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) mdev->port_cnt++; - /* Initialize time stamp mechanism */ - if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) - mlx4_en_init_timestamp(mdev); - /* Set default number of RX rings*/ mlx4_en_set_num_rx_rings(mdev); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 4eef316..7869f97 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2072,6 +2072,9 @@ void mlx4_en_destroy_netdev(struct net_device *dev) /* flush any pending task for this netdev */ flush_workqueue(mdev->workqueue); + if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) + mlx4_en_remove_timestamp(mdev); + /* Detach the netdev so tasks would not attempt to access it */ mutex_lock(&mdev->state_lock); mdev->pndev[priv->port] = NULL; @@ -3058,6 +3061,10 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, } queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY); + /* Initialize time stamp mechanism */ + if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) + mlx4_en_init_timestamp(mdev); + queue_delayed_work(mdev->workqueue, &priv->service_task, SERVICE_TASK_DELAY); -- cgit v0.10.2 From 6e3cd5fa65318f35ec9c9f61bc5cdb55d4783cb9 Mon Sep 17 00:00:00 2001 From: Venkat Duvvuru Date: Fri, 18 Dec 2015 01:40:50 +0530 Subject: be2net: Avoid accessing eq object in be_msix_register routine, when i < 0. When the first request_irq fails in be_msix_register, i value would be zero. The current code decrements the i value and accesses the eq object without validating the decremented "i" value. This can cause an "invalid memory address access" violation. This patch fixes the problem by accessing the eq object after validating the "i" value. Signed-off-by: Venkat Duvvuru Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index b6ad029..6598820 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3299,8 +3299,10 @@ static int be_msix_register(struct be_adapter *adapter) return 0; err_msix: - for (i--, eqo = &adapter->eq_obj[i]; i >= 0; i--, eqo--) + for (i--; i >= 0; i--) { + eqo = &adapter->eq_obj[i]; free_irq(be_msix_vec_get(adapter, eqo), eqo); + } dev_warn(&adapter->pdev->dev, "MSIX Request IRQ failed - err %d\n", status); be_msix_disable(adapter); -- cgit v0.10.2 From acf673a3187edf72068ee2f92f4dc47d66baed47 Mon Sep 17 00:00:00 2001 From: David Miller Date: Thu, 17 Dec 2015 16:05:32 -0500 Subject: 6pack: Fix use after free in sixpack_close(). Need to do the unregister_device() after all references to the driver private have been done. Also we need to use del_timer_sync() for the timers so that we don't have any asynchronous references after the unregister. Signed-off-by: David S. Miller diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 7c4a415..9f0b1c3 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -683,14 +683,14 @@ static void sixpack_close(struct tty_struct *tty) if (!atomic_dec_and_test(&sp->refcnt)) down(&sp->dead_sem); - unregister_netdev(sp->dev); - - del_timer(&sp->tx_t); - del_timer(&sp->resync_t); + del_timer_sync(&sp->tx_t); + del_timer_sync(&sp->resync_t); /* Free all 6pack frame buffers. */ kfree(sp->rbuff); kfree(sp->xbuff); + + unregister_netdev(sp->dev); } /* Perform I/O control on an active 6pack channel. */ -- cgit v0.10.2 From d79f16c046086f4fe0d42184a458e187464eb83e Mon Sep 17 00:00:00 2001 From: David Miller Date: Thu, 17 Dec 2015 16:05:49 -0500 Subject: mkiss: Fix use after free in mkiss_close(). Need to do the unregister_device() after all references to the driver private have been done. Signed-off-by: David S. Miller diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 216bfd3..0b72b9d 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -798,13 +798,13 @@ static void mkiss_close(struct tty_struct *tty) if (!atomic_dec_and_test(&ax->refcnt)) down(&ax->dead_sem); - unregister_netdev(ax->dev); - /* Free all AX25 frame buffers. */ kfree(ax->rbuff); kfree(ax->xbuff); ax->tty = NULL; + + unregister_netdev(ax->dev); } /* Perform I/O control on an active ax25 channel. */ -- cgit v0.10.2 From 6d3c348a63685410b12bf961b97063efeef2f901 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 17 Dec 2015 16:46:39 -0800 Subject: ipip: ioctl: Remove superfluous IP-TTL handling. IP-TTL case is already handled in ip_tunnel_ioctl() API. Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index f34c31d..a09fb0d 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -253,9 +253,6 @@ ipip_tunnel_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) p.i_key = p.o_key = 0; p.i_flags = p.o_flags = 0; - if (p.iph.ttl) - p.iph.frag_off |= htons(IP_DF); - err = ip_tunnel_ioctl(dev, &p, cmd); if (err) return err; -- cgit v0.10.2 From ea2465af3bbfa7994d134a401503966ee98710b6 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Fri, 18 Dec 2015 10:42:12 +0200 Subject: bnx2x: Prevent FW assertion when using Vxlan FW has a rare corner case in which a fragmented packet using lots of frags would not be linearized, causing the FW to assert while trying to transmit the packet. To prevent this, we need to make sure the window of fragements containing MSS worth of data contains 1 BD less than for regular packets due to the additional parsing BD. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index f8d7a2f..c82ab87 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3430,25 +3430,29 @@ static u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) return rc; } -#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) +/* VXLAN: 4 = 1 (for linear data BD) + 3 (2 for PBD and last BD) */ +#define BNX2X_NUM_VXLAN_TSO_WIN_SUB_BDS 4 + +/* Regular: 3 = 1 (for linear data BD) + 2 (for PBD and last BD) */ +#define BNX2X_NUM_TSO_WIN_SUB_BDS 3 + +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - BDS_PER_TX_PKT) /* check if packet requires linearization (packet is too fragmented) no need to check fragmentation if page size > 8K (there will be no violation to FW restrictions) */ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, u32 xmit_type) { - int to_copy = 0; - int hlen = 0; - int first_bd_sz = 0; + int first_bd_sz = 0, num_tso_win_sub = BNX2X_NUM_TSO_WIN_SUB_BDS; + int to_copy = 0, hlen = 0; - /* 3 = 1 (for linear data BD) + 2 (for PBD and last BD) */ - if (skb_shinfo(skb)->nr_frags >= (MAX_FETCH_BD - 3)) { + if (xmit_type & XMIT_GSO_ENC) + num_tso_win_sub = BNX2X_NUM_VXLAN_TSO_WIN_SUB_BDS; + if (skb_shinfo(skb)->nr_frags >= (MAX_FETCH_BD - num_tso_win_sub)) { if (xmit_type & XMIT_GSO) { unsigned short lso_mss = skb_shinfo(skb)->gso_size; - /* Check if LSO packet needs to be copied: - 3 = 1 (for headers BD) + 2 (for PBD and last BD) */ - int wnd_size = MAX_FETCH_BD - 3; + int wnd_size = MAX_FETCH_BD - num_tso_win_sub; /* Number of windows to check */ int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size; int wnd_idx = 0; -- cgit v0.10.2 From e905eabc90a5b787d8708df164543ee295bea5f2 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Dec 2015 19:43:15 +0900 Subject: openvswitch: correct encoding of set tunnel action attributes In a set action tunnel attributes should be encoded in a nested action. I noticed this because ovs-dpctl was reporting an error when dumping flows due to the incorrect encoding of tunnel attributes in a set action. Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.") Signed-off-by: Simon Horman Signed-off-by: David S. Miller diff --git a/net/openvswitch/flow_netlink.c b/net/openvswitch/flow_netlink.c index 907d6fd..d1bd4a4 100644 --- a/net/openvswitch/flow_netlink.c +++ b/net/openvswitch/flow_netlink.c @@ -2434,7 +2434,10 @@ static int set_action_to_attr(const struct nlattr *a, struct sk_buff *skb) if (!start) return -EMSGSIZE; - err = ovs_nla_put_tunnel_info(skb, tun_info); + err = ip_tun_to_nlattr(skb, &tun_info->key, + ip_tunnel_info_opts(tun_info), + tun_info->options_len, + ip_tunnel_info_af(tun_info)); if (err) return err; nla_nest_end(skb, start); -- cgit v0.10.2 From 41a0c249cb8706a2efa1ab3d59466b23a27d0c8b Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 18 Dec 2015 14:22:01 -0800 Subject: proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter Writing to /proc/$pid/coredump_filter always returns -ESRCH because commit 774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") removed the setting of ret after the get_proc_task call and incorrectly left it as -ESRCH. Instead, return 0 when successful. Example breakage: echo 0 > /proc/self/coredump_filter bash: echo: write error: No such process Fixes: 774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") Signed-off-by: Colin Ian King Acked-by: Kees Cook Cc: [4.3+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/base.c b/fs/proc/base.c index bd3e9e6..4bd5d31 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2494,6 +2494,7 @@ static ssize_t proc_coredump_filter_write(struct file *file, mm = get_task_mm(task); if (!mm) goto out_no_mm; + ret = 0; for (i = 0, mask = 1; i < MMF_DUMP_FILTER_BITS; i++, mask <<= 1) { if (val & mask) -- cgit v0.10.2 From 8bc8b228d076ae93398316f81eab35f3d12c0c4f Mon Sep 17 00:00:00 2001 From: Dan Streetman Date: Fri, 18 Dec 2015 14:22:04 -0800 Subject: mm/zswap: change incorrect strncmp use to strcmp Change the use of strncmp in zswap_pool_find_get() to strcmp. The use of strncmp is no longer correct, now that zswap_zpool_type is not an array; sizeof() will return the size of a pointer, which isn't the right length to compare. We don't need to use strncmp anyway, because the existing params and the passed in params are all guaranteed to be null terminated, so strcmp should be used. Signed-off-by: Dan Streetman Reported-by: Weijie Yang Cc: Seth Jennings Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/zswap.c b/mm/zswap.c index 025f8dc..bf14508 100644 --- a/mm/zswap.c +++ b/mm/zswap.c @@ -541,6 +541,7 @@ static struct zswap_pool *zswap_pool_last_get(void) return last; } +/* type and compressor must be null-terminated */ static struct zswap_pool *zswap_pool_find_get(char *type, char *compressor) { struct zswap_pool *pool; @@ -548,10 +549,9 @@ static struct zswap_pool *zswap_pool_find_get(char *type, char *compressor) assert_spin_locked(&zswap_pools_lock); list_for_each_entry_rcu(pool, &zswap_pools, list) { - if (strncmp(pool->tfm_name, compressor, sizeof(pool->tfm_name))) + if (strcmp(pool->tfm_name, compressor)) continue; - if (strncmp(zpool_get_type(pool->zpool), type, - sizeof(zswap_zpool_type))) + if (strcmp(zpool_get_type(pool->zpool), type)) continue; /* if we can't get it, it's about to be destroyed */ if (!zswap_pool_get(pool)) -- cgit v0.10.2 From 1d5cda4076d930d6d52088ed2c7753f7c564cbd7 Mon Sep 17 00:00:00 2001 From: James Morse Date: Fri, 18 Dec 2015 14:22:07 -0800 Subject: include/linux/mmdebug.h: should include linux/bug.h mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included linux/bug.h. Include it ourselves. This saves build-failures such as: arch/arm64/include/asm/pgtable.h: In function 'set_pte_at': arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration] VM_WARN_ONCE(!pte_young(pte), Fixes: 02602a18c32d7 ("bug: completely remove code generated by disabled VM_BUG_ON()") Signed-off-by: James Morse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h index 877ef22..772362a 100644 --- a/include/linux/mmdebug.h +++ b/include/linux/mmdebug.h @@ -1,6 +1,7 @@ #ifndef LINUX_MM_DEBUG_H #define LINUX_MM_DEBUG_H 1 +#include #include struct page; -- cgit v0.10.2 From 478e5ed1c3f6928ece7fffd712ba728b1f92217d Mon Sep 17 00:00:00 2001 From: James Chen Date: Fri, 18 Dec 2015 15:51:48 -0800 Subject: Input: elants_i2c - fix wake-on-touch When sending "SLEEP" command to the controller it ceases scanning completely and is unable to wake the system up from sleep, so if it is configured as a wakeup source we should simply configure interrupt for wakeup and rely on idle logic within the controller to reduce power consumption while it is not used. Signed-off-by: James Chen Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 17cc20e..ac09855 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -1316,7 +1316,13 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev) disable_irq(client->irq); - if (device_may_wakeup(dev) || ts->keep_power_in_suspend) { + if (device_may_wakeup(dev)) { + /* + * The device will automatically enter idle mode + * that has reduced power consumption. + */ + ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0); + } else if (ts->keep_power_in_suspend) { for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { error = elants_i2c_send(client, set_sleep_cmd, sizeof(set_sleep_cmd)); @@ -1326,10 +1332,6 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev) dev_err(&client->dev, "suspend command failed: %d\n", error); } - - if (device_may_wakeup(dev)) - ts->wake_irq_enabled = - (enable_irq_wake(client->irq) == 0); } else { elants_i2c_power_off(ts); } @@ -1345,10 +1347,11 @@ static int __maybe_unused elants_i2c_resume(struct device *dev) int retry_cnt; int error; - if (device_may_wakeup(dev) && ts->wake_irq_enabled) - disable_irq_wake(client->irq); - - if (ts->keep_power_in_suspend) { + if (device_may_wakeup(dev)) { + if (ts->wake_irq_enabled) + disable_irq_wake(client->irq); + elants_i2c_sw_reset(client); + } else if (ts->keep_power_in_suspend) { for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { error = elants_i2c_send(client, set_active_cmd, sizeof(set_active_cmd)); -- cgit v0.10.2 From 0b4d6972d7b052b23d33ff9bdbb52958664fbb26 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 18 Dec 2015 10:13:50 -0800 Subject: ARM: dts: Fix UART wakeirq for omap4 duovero parlor Looks like we're missing the wakeirq for the console uart for duovero parlor. Let's add that as without it console acess just hangs with PM enabled. Cc: Arun Bharadwaj Cc: Ash Charles Cc: Florian Vaussard Signed-off-by: Tony Lindgren diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 1a78f01..b75f7b2 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -189,3 +189,7 @@ }; }; +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; -- cgit v0.10.2 From b4a1b4f5047e4f54e194681125c74c0aa64d637d Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 18 Dec 2015 01:34:26 +0000 Subject: KEYS: Fix race between read and revoke This fixes CVE-2015-7550. There's a race between keyctl_read() and keyctl_revoke(). If the revoke happens between keyctl_read() checking the validity of a key and the key's semaphore being taken, then the key type read method will see a revoked key. This causes a problem for the user-defined key type because it assumes in its read method that there will always be a payload in a non-revoked key and doesn't check for a NULL pointer. Fix this by making keyctl_read() check the validity of a key after taking semaphore instead of before. I think the bug was introduced with the original keyrings code. This was discovered by a multithreaded test program generated by syzkaller (http://github.com/google/syzkaller). Here's a cleaned up version: #include #include #include void *thr0(void *arg) { key_serial_t key = (unsigned long)arg; keyctl_revoke(key); return 0; } void *thr1(void *arg) { key_serial_t key = (unsigned long)arg; char buffer[16]; keyctl_read(key, buffer, 16); return 0; } int main() { key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING); pthread_t th[5]; pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key); pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key); pthread_join(th[0], 0); pthread_join(th[1], 0); pthread_join(th[2], 0); pthread_join(th[3], 0); return 0; } Build as: cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread Run as: while keyctl-race; do :; done as it may need several iterations to crash the kernel. The crash can be summarised as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [] user_read+0x56/0xa3 ... Call Trace: [] keyctl_read_key+0xb6/0xd7 [] SyS_keyctl+0x83/0xe0 [] entry_SYSCALL_64_fastpath+0x12/0x6f Reported-by: Dmitry Vyukov Signed-off-by: David Howells Tested-by: Dmitry Vyukov Cc: stable@vger.kernel.org Signed-off-by: James Morris diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index fb111ea..1c3872a 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -751,16 +751,16 @@ long keyctl_read_key(key_serial_t keyid, char __user *buffer, size_t buflen) /* the key is probably readable - now try to read it */ can_read_key: - ret = key_validate(key); - if (ret == 0) { - ret = -EOPNOTSUPP; - if (key->type->read) { - /* read the data with the semaphore held (since we - * might sleep) */ - down_read(&key->sem); + ret = -EOPNOTSUPP; + if (key->type->read) { + /* Read the data with the semaphore held (since we might sleep) + * to protect against the key being updated or revoked. + */ + down_read(&key->sem); + ret = key_validate(key); + if (ret == 0) ret = key->type->read(key, buffer, buflen); - up_read(&key->sem); - } + up_read(&key->sem); } error2: -- cgit v0.10.2 From 179ccc0a73641ffd24e44ff10a7bd494efe98d8d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 19 Dec 2015 10:45:28 +0800 Subject: rhashtable: Kill harmless RCU warning in rhashtable_walk_init The commit c6ff5268293ef98e48a99597e765ffc417e39fa5 ("rhashtable: Fix walker list corruption") causes a suspicious RCU usage warning because we no longer hold ht->mutex when we dereference ht->tbl. However, this is a false positive because we now hold ht->lock which also guarantees that ht->tbl won't disppear from under us. This patch kills the warning by using rcu_dereference_protected. Reported-by: kernel test robot Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/lib/rhashtable.c b/lib/rhashtable.c index eb9240c..51282f5 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -519,7 +519,8 @@ int rhashtable_walk_init(struct rhashtable *ht, struct rhashtable_iter *iter) return -ENOMEM; spin_lock(&ht->lock); - iter->walker->tbl = rht_dereference(ht->tbl, ht); + iter->walker->tbl = + rcu_dereference_protected(ht->tbl, lockdep_is_held(&ht->lock)); list_add(&iter->walker->list, &iter->walker->tbl->walkers); spin_unlock(&ht->lock); -- cgit v0.10.2 From b4cd08aa1f53c831e67dc5c6bc9f9acff27abcba Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 16 Dec 2015 20:05:18 +0100 Subject: i2c: rcar: disable runtime PM correctly in slave mode When we also are I2C slave, we need to disable runtime PM because the address detection mechanism needs to be active all the time. However, we can reenable runtime PM once the slave instance was unregistered. So, use pm_runtime_get_sync/put to achieve this, since it has proper refcounting. pm_runtime_allow/forbid is like a global knob controllable from userspace which is unsuitable here. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index b0ae560..599c0d7 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -576,7 +576,7 @@ static int rcar_reg_slave(struct i2c_client *slave) if (slave->flags & I2C_CLIENT_TEN) return -EAFNOSUPPORT; - pm_runtime_forbid(rcar_i2c_priv_to_dev(priv)); + pm_runtime_get_sync(rcar_i2c_priv_to_dev(priv)); priv->slave = slave; rcar_i2c_write(priv, ICSAR, slave->addr); @@ -598,7 +598,7 @@ static int rcar_unreg_slave(struct i2c_client *slave) priv->slave = NULL; - pm_runtime_allow(rcar_i2c_priv_to_dev(priv)); + pm_runtime_put(rcar_i2c_priv_to_dev(priv)); return 0; } -- cgit v0.10.2 From c4e074074c142bb21b8c3283066d8e6c1fd2baba Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Fri, 27 Nov 2015 07:57:31 +0100 Subject: drm/exynos: atomic check only enabled crtc states Since atomic check is called also for disabled crtcs it should skip mode checking as it can be uninitialized. The patch fixes it. Signed-off-by: Andrzej Hajda Suggested-by: Daniel Vetter Tested-by: Javier Martinez Canillas Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index b3ba27f..e693571 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -55,6 +55,9 @@ static int exynos_crtc_atomic_check(struct drm_crtc *crtc, { struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc); + if (!state->enable) + return 0; + if (exynos_crtc->ops->atomic_check) return exynos_crtc->ops->atomic_check(exynos_crtc, state); -- cgit v0.10.2 From 45af55006c2c8f49bddc6296224e70d752a1372c Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 19 Dec 2015 15:13:49 +0300 Subject: natsemi: add checks for dma mapping errors refill_rx() and start_tx() do not check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c index b83f7c0..122c2ee 100644 --- a/drivers/net/ethernet/natsemi/natsemi.c +++ b/drivers/net/ethernet/natsemi/natsemi.c @@ -1937,6 +1937,12 @@ static void refill_rx(struct net_device *dev) break; /* Better luck next round. */ np->rx_dma[entry] = pci_map_single(np->pci_dev, skb->data, buflen, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(np->pci_dev, + np->rx_dma[entry])) { + dev_kfree_skb_any(skb); + np->rx_skbuff[entry] = NULL; + break; /* Better luck next round. */ + } np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]); } np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz); @@ -2093,6 +2099,12 @@ static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) np->tx_skbuff[entry] = skb; np->tx_dma[entry] = pci_map_single(np->pci_dev, skb->data,skb->len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(np->pci_dev, np->tx_dma[entry])) { + np->tx_skbuff[entry] = NULL; + dev_kfree_skb_irq(skb); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]); -- cgit v0.10.2 From f076ef44a44d02ed91543f820c14c2c7dff53716 Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Tue, 15 Dec 2015 15:02:49 -0800 Subject: rtc: rk808: Compensate for Rockchip calendar deviation on November 31st In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar insufficiently represented reality, and changed the rules about calculating leap years to account for this. Similarly, in A.D. 2013 Rockchip hardware engineers found that the new Gregorian calendar still contained flaws, and that the month of November should be counted up to 31 days instead. Unfortunately it takes a long time for calendar changes to gain widespread adoption, and just like more than 300 years went by before the last Protestant nation implemented Greg's proposal, we will have to wait a while until all religions and operating system kernels acknowledge the inherent advantages of the Rockchip system. Until then we need to translate dates read from (and written to) Rockchip hardware back to the Gregorian format. This patch works by defining Jan 1st, 2016 as the arbitrary anchor date on which Rockchip and Gregorian calendars are in sync. From that we can translate arbitrary later dates back and forth by counting the number of November/December transitons since the anchor date to determine the offset between the calendars. We choose this method (rather than trying to regularly "correct" the date stored in hardware) since it's the only way to ensure perfect time-keeping even if the system may be shut down for an unknown number of years. The drawback is that other software reading the same hardware (e.g. mainboard firmware) must use the same translation convention (including the same anchor date) to be able to read and write correct timestamps from/to the RTC. Signed-off-by: Julius Werner Reviewed-by: Douglas Anderson Signed-off-by: Alexandre Belloni diff --git a/drivers/rtc/rtc-rk808.c b/drivers/rtc/rtc-rk808.c index 91ca0bc..35c9aad 100644 --- a/drivers/rtc/rtc-rk808.c +++ b/drivers/rtc/rtc-rk808.c @@ -56,6 +56,42 @@ struct rk808_rtc { int irq; }; +/* + * The Rockchip calendar used by the RK808 counts November with 31 days. We use + * these translation functions to convert its dates to/from the Gregorian + * calendar used by the rest of the world. We arbitrarily define Jan 1st, 2016 + * as the day when both calendars were in sync, and treat all other dates + * relative to that. + * NOTE: Other system software (e.g. firmware) that reads the same hardware must + * implement this exact same conversion algorithm, with the same anchor date. + */ +static time64_t nov2dec_transitions(struct rtc_time *tm) +{ + return (tm->tm_year + 1900) - 2016 + (tm->tm_mon + 1 > 11 ? 1 : 0); +} + +static void rockchip_to_gregorian(struct rtc_time *tm) +{ + /* If it's Nov 31st, rtc_tm_to_time64() will count that like Dec 1st */ + time64_t time = rtc_tm_to_time64(tm); + rtc_time64_to_tm(time + nov2dec_transitions(tm) * 86400, tm); +} + +static void gregorian_to_rockchip(struct rtc_time *tm) +{ + time64_t extra_days = nov2dec_transitions(tm); + time64_t time = rtc_tm_to_time64(tm); + rtc_time64_to_tm(time - extra_days * 86400, tm); + + /* Compensate if we went back over Nov 31st (will work up to 2381) */ + if (nov2dec_transitions(tm) < extra_days) { + if (tm->tm_mon + 1 == 11) + tm->tm_mday++; /* This may result in 31! */ + else + rtc_time64_to_tm(time - (extra_days - 1) * 86400, tm); + } +} + /* Read current time and date in RTC */ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm) { @@ -101,9 +137,10 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm) tm->tm_mon = (bcd2bin(rtc_data[4] & MONTHS_REG_MSK)) - 1; tm->tm_year = (bcd2bin(rtc_data[5] & YEARS_REG_MSK)) + 100; tm->tm_wday = bcd2bin(rtc_data[6] & WEEKS_REG_MSK); + rockchip_to_gregorian(tm); dev_dbg(dev, "RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n", 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday, - tm->tm_wday, tm->tm_hour , tm->tm_min, tm->tm_sec); + tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec); return ret; } @@ -116,6 +153,10 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm) u8 rtc_data[NUM_TIME_REGS]; int ret; + dev_dbg(dev, "set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n", + 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday, + tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec); + gregorian_to_rockchip(tm); rtc_data[0] = bin2bcd(tm->tm_sec); rtc_data[1] = bin2bcd(tm->tm_min); rtc_data[2] = bin2bcd(tm->tm_hour); @@ -123,9 +164,6 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm) rtc_data[4] = bin2bcd(tm->tm_mon + 1); rtc_data[5] = bin2bcd(tm->tm_year - 100); rtc_data[6] = bin2bcd(tm->tm_wday); - dev_dbg(dev, "set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n", - 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday, - tm->tm_wday, tm->tm_hour , tm->tm_min, tm->tm_sec); /* Stop RTC while updating the RTC registers */ ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG, @@ -170,6 +208,7 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) alrm->time.tm_mday = bcd2bin(alrm_data[3] & DAYS_REG_MSK); alrm->time.tm_mon = (bcd2bin(alrm_data[4] & MONTHS_REG_MSK)) - 1; alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100; + rockchip_to_gregorian(&alrm->time); ret = regmap_read(rk808->regmap, RK808_RTC_INT_REG, &int_reg); if (ret) { @@ -227,6 +266,7 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) alrm->time.tm_mday, alrm->time.tm_wday, alrm->time.tm_hour, alrm->time.tm_min, alrm->time.tm_sec); + gregorian_to_rockchip(&alrm->time); alrm_data[0] = bin2bcd(alrm->time.tm_sec); alrm_data[1] = bin2bcd(alrm->time.tm_min); alrm_data[2] = bin2bcd(alrm->time.tm_hour); -- cgit v0.10.2 From 77535acedc26627f16a1a39c1471f942689fe11e Mon Sep 17 00:00:00 2001 From: Steve Twiss Date: Tue, 8 Dec 2015 16:28:39 +0000 Subject: rtc: da9063: fix access ordering error during RTC interrupt at system power on This fix alters the ordering of the IRQ and device registrations in the RTC driver probe function. This change will apply to the RTC driver that supports both DA9063 and DA9062 PMICs. A problem could occur with the existing RTC driver if: A system is started from a cold boot using the PMIC RTC IRQ to initiate a power on operation. For instance, if an RTC alarm is used to start a platform from power off. The existing driver IRQ is requested before the device has been properly registered. i.e. ret = devm_request_threaded_irq() comes before rtc->rtc_dev = devm_rtc_device_register(); In this case, the interrupt can be called before the device has been registered and the handler can be called immediately. The IRQ handler da9063_alarm_event() contains the function call rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); which in turn tries to access the unavailable rtc->rtc_dev. The fix is to reorder the functions inside the RTC probe. The IRQ is requested after the RTC device resource has been registered so that get_irq_byname is the last thing to happen. Signed-off-by: Steve Twiss Signed-off-by: Alexandre Belloni diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c index 284b587..d6c853b 100644 --- a/drivers/rtc/rtc-da9063.c +++ b/drivers/rtc/rtc-da9063.c @@ -483,24 +483,23 @@ static int da9063_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); + rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, DA9063_DRVNAME_RTC, + &da9063_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc->rtc_dev)) + return PTR_ERR(rtc->rtc_dev); + + da9063_data_to_tm(data, &rtc->alarm_time, rtc); + rtc->rtc_sync = false; + irq_alarm = platform_get_irq_byname(pdev, "ALARM"); ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL, da9063_alarm_event, IRQF_TRIGGER_LOW | IRQF_ONESHOT, "ALARM", rtc); - if (ret) { + if (ret) dev_err(&pdev->dev, "Failed to request ALARM IRQ %d: %d\n", irq_alarm, ret); - return ret; - } - - rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, DA9063_DRVNAME_RTC, - &da9063_rtc_ops, THIS_MODULE); - if (IS_ERR(rtc->rtc_dev)) - return PTR_ERR(rtc->rtc_dev); - da9063_data_to_tm(data, &rtc->alarm_time, rtc); - rtc->rtc_sync = false; return ret; } -- cgit v0.10.2 From 4ef7675344d687a0ef5b0d7c0cee12da005870c0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 20 Dec 2015 16:06:09 -0800 Subject: Linux 4.4-rc6 diff --git a/Makefile b/Makefile index bc0165d..4e2b18d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 4 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Blurry Fish Butt # *DOCUMENTATION* -- cgit v0.10.2 From 312045eef985b61d74c28047ecd8eca6719d9516 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 21 Dec 2015 11:01:21 +1100 Subject: md: remove check for MD_RECOVERY_NEEDED in action_store. md currently doesn't allow a 'sync_action' such as 'reshape' to be set while MD_RECOVERY_NEEDED is set. This s a problem, particularly since commit 738a273806ee as that can cause ->check_shape to call mddev_resume() which sets MD_RECOVERY_NEEDED. So by the time we come to start 'reshape' it is very likely that MD_RECOVERY_NEEDED is still set. Testing for this flag is not really needed and is in any case very racy as it can be set at any moment - asynchronously. Any race between setting a sync_action and setting MD_RECOVERY_NEEDED must already be handled properly in some locked code, probably md_check_recovery(), so remove the test here. The test on MD_RECOVERY_RUNNING is also racy in the 'reshape' case so we should test it again after getting mddev_lock(). As this fixes a race and a regression which can cause 'reshape' to fail, it is suitable for -stable kernels since 4.1 Reported-by: Xiao Ni Fixes: 738a273806ee ("md/raid5: fix allocation of 'scribble' array.") Cc: stable@vger.kernel.org (v4.1+) Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index dbedc58..61aacab 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4326,8 +4326,7 @@ action_store(struct mddev *mddev, const char *page, size_t len) } mddev_unlock(mddev); } - } else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || - test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) + } else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) return -EBUSY; else if (cmd_match(page, "resync")) clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); @@ -4340,8 +4339,12 @@ action_store(struct mddev *mddev, const char *page, size_t len) return -EINVAL; err = mddev_lock(mddev); if (!err) { - clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); - err = mddev->pers->start_reshape(mddev); + if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) + err = -EBUSY; + else { + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + err = mddev->pers->start_reshape(mddev); + } mddev_unlock(mddev); } if (err) -- cgit v0.10.2 From ce360db703c98bd51fffe6f5d04a9e2294950514 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Wed, 16 Dec 2015 20:32:23 -0800 Subject: ACPI / processor: Fix thermal cooling device regression The processor cooling device is no longer present for passive thermal control. Commit 239708a3af44 ("ACPI: Split out ACPI PSS from ACPI Processor driver") moved the processing to a new function acpi_pss_perf_init(), but missed "return 0" after successful creation. This causes the error handling functions to be called, which will delete the previously created processor cooling device. Fixes: 239708a3af44 (ACPI: Split out ACPI PSS from ACPI Processor driver) Signed-off-by: Srinivas Pandruvada Cc: 4.3+ # 4.3+ Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index f4e02ae..11154a3 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -200,7 +200,8 @@ static int acpi_pss_perf_init(struct acpi_processor *pr, goto err_remove_sysfs_thermal; } - sysfs_remove_link(&pr->cdev->device.kobj, "device"); + return 0; + err_remove_sysfs_thermal: sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); err_thermal_unregister: -- cgit v0.10.2 From 899cfd2bb0d1953d78d14d5e912e13b8bd92a58f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sat, 19 Dec 2015 13:43:34 +0530 Subject: ARC: mm: HIGHMEM: Fix section mismatch splat | WARNING: vmlinux.o(.text+0xd6c2): Section mismatch in reference from the function alloc_kmap_pgtable() to the function | .init.text:__alloc_bootmem_low() The function alloc_kmap_pgtable() references the function __init __alloc_bootmem_low(). This is often because alloc_kmap_pgtable lacks a __init annotation or the annotation of __alloc_bootmem_low is wrong. Signed-off-by: Vineet Gupta diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c index 065ee6b..92dd92c 100644 --- a/arch/arc/mm/highmem.c +++ b/arch/arc/mm/highmem.c @@ -111,7 +111,7 @@ void __kunmap_atomic(void *kv) } EXPORT_SYMBOL(__kunmap_atomic); -noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr) +static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr) { pgd_t *pgd_k; pud_t *pud_k; @@ -127,7 +127,7 @@ noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr) return pte_k; } -void kmap_init(void) +void __init kmap_init(void) { /* Due to recursive include hell, we can't do this in processor.h */ BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE)); -- cgit v0.10.2 From 4b32e89af7a054ae3f84f388cb622aeeb8beec9d Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Fri, 18 Dec 2015 22:28:51 +0300 Subject: ARC: mm: fix building for MMU v2 ARC700 cores with MMU v2 don't have IC_PTAG AUX register and so we only define ARC_REG_IC_PTAG for MMU versions >= 3. But current implementation of cache_line_loop_vX() routines assumes availability of all of them (v2, v3 and v4) simultaneously. And given undefined ARC_REG_IC_PTAG if CONFIG_MMU_VER=2 we're seeing compilation problem: ---------------------------------->8------------------------------- CC arch/arc/mm/cache.o arch/arc/mm/cache.c: In function '__cache_line_loop_v3': arch/arc/mm/cache.c:270:13: error: 'ARC_REG_IC_PTAG' undeclared (first use in this function) aux_tag = ARC_REG_IC_PTAG; ^ arch/arc/mm/cache.c:270:13: note: each undeclared identifier is reported only once for each function it appears in scripts/Makefile.build:258: recipe for target 'arch/arc/mm/cache.o' failed ---------------------------------->8------------------------------- The simples fix is to have ARC_REG_IC_PTAG defined regardless MMU version being used. We don't use it in cache_line_loop_v2() anyways so who cares. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index abf06e8..210ef3e 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -62,9 +62,7 @@ extern int ioc_exists; #define ARC_REG_IC_IVIC 0x10 #define ARC_REG_IC_CTRL 0x11 #define ARC_REG_IC_IVIL 0x19 -#if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4) #define ARC_REG_IC_PTAG 0x1E -#endif #define ARC_REG_IC_PTAG_HI 0x1F /* Bit val in IC_CTRL */ -- cgit v0.10.2 From 07fd7d4bbcb9a7c741c7e67e715680d9e5835ff2 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 21 Dec 2015 12:38:01 +0530 Subject: ARC: Fix linking errors with CONFIG_MODULE + CONFIG_CC_OPTIMIZE_FOR_SIZE At -Os, ARC gcc generates millicode thunk for function prologue/epilogue, which are served by libgcc. Modules historically are NOT linked with libgcc to avoid code bloat, reducing runtime relocation fixups etc. I even once tried doing that but got lost in makefile intricacies. This means modules at -Os don't get the millicode thunks, causing build failures below: | MODPOST 5 modules | ERROR: "__ld_r13_to_r18" [crypto/sha256_generic.ko] undefined! | ERROR: "__ld_r13_to_r18_ret" [crypto/sha256_generic.ko] undefined! | ERROR: "__st_r13_to_r18" [crypto/sha256_generic.ko] undefined! | ERROR: "__ld_r13_to_r17_ret" [crypto/sha256_generic.ko] undefined! | ERROR: "__st_r13_to_r17" [crypto/sha256_generic.ko] undefined! | ERROR: "__ld_r13_to_r16_ret" [crypto/sha256_generic.ko] undefined! | ERROR: "__st_r13_to_r16" [crypto/sha256_generic.ko] undefined! |.... |.... Workaround that by inhibiting millicode thunks for loadable modules Fixes STAR 9000641864: ("Linux built with optimizations for size emits errors for modules") Reported-by: Anton Kolesov Cc: Michal Marek Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta diff --git a/arch/arc/Makefile b/arch/arc/Makefile index cf0cf34..aeb1902 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -81,7 +81,7 @@ endif LIBGCC := $(shell $(CC) $(cflags-y) --print-libgcc-file-name) # Modules with short calls might break for calls into builtin-kernel -KBUILD_CFLAGS_MODULE += -mlong-calls +KBUILD_CFLAGS_MODULE += -mlong-calls -mno-millicode # Finally dump eveything into kernel build system KBUILD_CFLAGS += $(cflags-y) -- cgit v0.10.2 From 2d64affc92d6281d2eca4faad326b981773bf040 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 21 Dec 2015 13:29:44 +0530 Subject: Revert "ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing" Blingly ignoring CIE.version != 1 was a bad idea. It still leaves "desirability" when running perf with callgraphing where libgcc symbols might show in hotspot. More importantly, basic CIE.version == 3 support already exists in code: | | retAddrReg = state.version <= 1 ? *ptr++ : get_uleb128(&ptr, end); | Next commit with simply add continue-not-bail for CIE.version != 1 This reverts commit 323f41f9e7d0cb5b1d1586aded6682855f1e646d. diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index cf2828a..9f9ecc1 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -293,13 +293,13 @@ static void init_unwind_hdr(struct unwind_table *table, const u32 *cie = cie_for_fde(fde, table); signed ptrType; - if (cie == ¬_fde) /* only process FDE here */ + if (cie == ¬_fde) continue; if (cie == NULL || cie == &bad_cie) - continue; /* say FDE->CIE.version != 1 */ + return; ptrType = fde_pointer_type(cie); if (ptrType < 0) - continue; + return; ptr = (const u8 *)(fde + 2); if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde, @@ -343,10 +343,6 @@ static void init_unwind_hdr(struct unwind_table *table, if (fde[1] == 0xffffffff) continue; /* this is a CIE */ - - if (*(u8 *)(cie + 2) != 1) - continue; /* FDE->CIE.version not supported */ - ptr = (const u8 *)(fde + 2); header->table[n].start = read_pointer(&ptr, (const u8 *)(fde + 1) + @@ -523,8 +519,7 @@ static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table) if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde) || (*cie & (sizeof(*cie) - 1)) - || (cie[1] != 0xffffffff) - || ( *(u8 *)(cie + 2) != 1)) /* version 1 supported */ + || (cie[1] != 0xffffffff)) return NULL; /* this is not a (valid) CIE */ return cie; } -- cgit v0.10.2 From 6d0d506012c93d3393b8d3d0cac62e46e541c5b6 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 21 Dec 2015 13:40:05 +0530 Subject: ARC: dw2 unwind: Don't bail for CIE.version != 1 The rudimentary CIE.version == 3 handling is already present in code (for return address register specification) Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index 9f9ecc1..f34599a 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -600,9 +600,6 @@ static signed fde_pointer_type(const u32 *cie) const u8 *ptr = (const u8 *)(cie + 2); unsigned version = *ptr; - if (version != 1) - return -1; /* unsupported */ - if (*++ptr) { const char *aug; const u8 *end = (const u8 *)(cie + 1) + *cie; @@ -1014,9 +1011,7 @@ int arc_unwind(struct unwind_frame_info *frame) ptr = (const u8 *)(cie + 2); end = (const u8 *)(cie + 1) + *cie; frame->call_frame = 1; - if ((state.version = *ptr) != 1) - cie = NULL; /* unsupported version */ - else if (*++ptr) { + if (*++ptr) { /* check if augmentation size is first (thus present) */ if (*ptr == 'z') { while (++ptr < end && *ptr) { -- cgit v0.10.2 From 6b538db7c6b091960c57b23feae5431fc82286e7 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 21 Dec 2015 13:52:01 +0530 Subject: ARC: dw2 unwind: Catch Dwarf SNAFUs early Instead of seeing empty stack traces, let kernel fail early so dwarf issues can be fixed sooner Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index f34599a..5eb7076 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -296,10 +296,10 @@ static void init_unwind_hdr(struct unwind_table *table, if (cie == ¬_fde) continue; if (cie == NULL || cie == &bad_cie) - return; + goto ret_err; ptrType = fde_pointer_type(cie); if (ptrType < 0) - return; + goto ret_err; ptr = (const u8 *)(fde + 2); if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde, @@ -315,14 +315,14 @@ static void init_unwind_hdr(struct unwind_table *table, } if (tableSize || !n) - return; + goto ret_err; hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int) + 2 * n * sizeof(unsigned long); header = alloc(hdrSize); if (!header) - return; + goto ret_err; header->version = 1; header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native; @@ -361,6 +361,10 @@ static void init_unwind_hdr(struct unwind_table *table, table->hdrsz = hdrSize; smp_wmb(); table->header = (const void *)header; + return; + +ret_err: + panic("Attention !!! Dwarf FDE parsing errors\n");; } #ifdef CONFIG_MODULES -- cgit v0.10.2 From 71a71fb5374a23be36a91981b5614590b9e722c3 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 21 Dec 2015 10:03:30 +0100 Subject: parisc: Fix syscall restarts On parisc syscalls which are interrupted by signals sometimes failed to restart and instead returned -ENOSYS which in the worst case lead to userspace crashes. A similiar problem existed on MIPS and was fixed by commit e967ef02 ("MIPS: Fix restart of indirect syscalls"). On parisc the current syscall restart code assumes that all syscall callers load the syscall number in the delay slot of the ble instruction. That's how it is e.g. done in the unistd.h header file: ble 0x100(%sr2, %r0) ldi #syscall_nr, %r20 Because of that assumption the current code never restored %r20 before returning to userspace. This assumption is at least not true for code which uses the glibc syscall() function, which instead uses this syntax: ble 0x100(%sr2, %r0) copy regX, %r20 where regX depend on how the compiler optimizes the code and register usage. This patch fixes this problem by adding code to analyze how the syscall number is loaded in the delay branch and - if needed - copy the syscall number to regX prior returning to userspace for the syscall restart. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index dc1ea79..2264f68 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -435,6 +435,55 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs, int in_syscall) regs->gr[28]); } +/* + * Check how the syscall number gets loaded into %r20 within + * the delay branch in userspace and adjust as needed. + */ + +static void check_syscallno_in_delay_branch(struct pt_regs *regs) +{ + u32 opcode, source_reg; + u32 __user *uaddr; + int err; + + /* Usually we don't have to restore %r20 (the system call number) + * because it gets loaded in the delay slot of the branch external + * instruction via the ldi instruction. + * In some cases a register-to-register copy instruction might have + * been used instead, in which case we need to copy the syscall + * number into the source register before returning to userspace. + */ + + /* A syscall is just a branch, so all we have to do is fiddle the + * return pointer so that the ble instruction gets executed again. + */ + regs->gr[31] -= 8; /* delayed branching */ + + /* Get assembler opcode of code in delay branch */ + uaddr = (unsigned int *) ((regs->gr[31] & ~3) + 4); + err = get_user(opcode, uaddr); + if (err) + return; + + /* Check if delay branch uses "ldi int,%r20" */ + if ((opcode & 0xffff0000) == 0x34140000) + return; /* everything ok, just return */ + + /* Check if delay branch uses "nop" */ + if (opcode == INSN_NOP) + return; + + /* Check if delay branch uses "copy %rX,%r20" */ + if ((opcode & 0xffe0ffff) == 0x08000254) { + source_reg = (opcode >> 16) & 31; + regs->gr[source_reg] = regs->gr[20]; + return; + } + + pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n", + current->comm, task_pid_nr(current), opcode); +} + static inline void syscall_restart(struct pt_regs *regs, struct k_sigaction *ka) { @@ -457,10 +506,7 @@ syscall_restart(struct pt_regs *regs, struct k_sigaction *ka) } /* fallthrough */ case -ERESTARTNOINTR: - /* A syscall is just a branch, so all - * we have to do is fiddle the return pointer. - */ - regs->gr[31] -= 8; /* delayed branching */ + check_syscallno_in_delay_branch(regs); break; } } @@ -510,15 +556,9 @@ insert_restart_trampoline(struct pt_regs *regs) } case -ERESTARTNOHAND: case -ERESTARTSYS: - case -ERESTARTNOINTR: { - /* Hooray for delayed branching. We don't - * have to restore %r20 (the system call - * number) because it gets loaded in the delay - * slot of the branch external instruction. - */ - regs->gr[31] -= 8; + case -ERESTARTNOINTR: + check_syscallno_in_delay_branch(regs); return; - } default: break; } -- cgit v0.10.2 From 670c0d62ea5d16026adde5f3538b1caaa904a909 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 18 Dec 2015 14:43:33 +0100 Subject: net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card Unlike DW5550, Dell DW5812 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 1e9843a..3a71e60 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1558,6 +1558,15 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long) &wwan_info, }, + /* DW5812 LTE Verizon Mobile Broadband Card + * Unlike DW5550 this device requires FLAG_NOARP + */ + { USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x81bb, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_noarp_info, + }, + /* Dell branded MBM devices like DW5550 */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_VENDOR, -- cgit v0.10.2 From fb83d5f283dc699c891b30c341e758d9a060a7c6 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 18 Dec 2015 14:43:34 +0100 Subject: net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card Unlike DW5550, Dell DW5813 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 3a71e60..3694052 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1567,6 +1567,15 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long)&wwan_noarp_info, }, + /* DW5813 LTE AT&T Mobile Broadband Card + * Unlike DW5550 this device requires FLAG_NOARP + */ + { USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x81bc, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&wwan_noarp_info, + }, + /* Dell branded MBM devices like DW5550 */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_VENDOR, -- cgit v0.10.2 From 9f660a1c43890c2cdd1f423fd73654e7ca08fe56 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Tue, 22 Dec 2015 00:45:43 +0100 Subject: ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2) Without this patch, internal speaker and line-out work, but front headphone output jack stays silent on the Mac Pro 4,1. This code path also gets executed on the MacPro 5,1 due to identical codec SSID, but i don't know if it has any positive or adverse effects there or not. (v2) Implement feedback from Takashi Iwai: Reuse alc889_fixup_mbp_vref and just add a new nid 0x19 for the MacPro 4,1. Signed-off-by: Mario Kleiner Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6c268da..fe96428 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1775,6 +1775,7 @@ enum { ALC889_FIXUP_MBA11_VREF, ALC889_FIXUP_MBA21_VREF, ALC889_FIXUP_MP11_VREF, + ALC889_FIXUP_MP41_VREF, ALC882_FIXUP_INV_DMIC, ALC882_FIXUP_NO_PRIMARY_HP, ALC887_FIXUP_ASUS_BASS, @@ -1863,7 +1864,7 @@ static void alc889_fixup_mbp_vref(struct hda_codec *codec, const struct hda_fixup *fix, int action) { struct alc_spec *spec = codec->spec; - static hda_nid_t nids[2] = { 0x14, 0x15 }; + static hda_nid_t nids[3] = { 0x14, 0x15, 0x19 }; int i; if (action != HDA_FIXUP_ACT_INIT) @@ -2153,6 +2154,12 @@ static const struct hda_fixup alc882_fixups[] = { .chained = true, .chain_id = ALC885_FIXUP_MACPRO_GPIO, }, + [ALC889_FIXUP_MP41_VREF] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc889_fixup_mbp_vref, + .chained = true, + .chain_id = ALC885_FIXUP_MACPRO_GPIO, + }, [ALC882_FIXUP_INV_DMIC] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_inv_dmic, @@ -2235,7 +2242,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4100, "Macmini 3,1", ALC889_FIXUP_IMAC91_VREF), - SND_PCI_QUIRK(0x106b, 0x4200, "Mac Pro 5,1", ALC885_FIXUP_MACPRO_GPIO), + SND_PCI_QUIRK(0x106b, 0x4200, "Mac Pro 4,1/5,1", ALC889_FIXUP_MP41_VREF), SND_PCI_QUIRK(0x106b, 0x4300, "iMac 9,1", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC889_FIXUP_IMAC91_VREF), -- cgit v0.10.2 From 615cb24326bbe19834a1aba47677a6c80bdcfc01 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 14 Dec 2015 13:16:48 +0200 Subject: drm/i915: Drop the broken cursor base==0 special casing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The cursor code tries to treat base==0 to mean disabled. That fails when the cursor bo gets bound at ggtt offset 0, and the user is left looking at an invisible cursor. We lose the disabled->disabled optimization, but that seems like something better handled at a slightly higher level. Cc: drm-intel-fixes@lists.freedesktop.org Cc: Takashi Iwai Cc: Jani Nikula Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1450091808-32607-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit 663f3122d00c0b412d429f105dca129aa8f4f094) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 62211ab..1bdf995 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9910,14 +9910,14 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, return true; } -static void i845_update_cursor(struct drm_crtc *crtc, u32 base) +static void i845_update_cursor(struct drm_crtc *crtc, u32 base, bool on) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t cntl = 0, size = 0; - if (base) { + if (on) { unsigned int width = intel_crtc->base.cursor->state->crtc_w; unsigned int height = intel_crtc->base.cursor->state->crtc_h; unsigned int stride = roundup_pow_of_two(width) * 4; @@ -9972,16 +9972,15 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base) } } -static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) +static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base, bool on) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - uint32_t cntl; + uint32_t cntl = 0; - cntl = 0; - if (base) { + if (on) { cntl = MCURSOR_GAMMA_ENABLE; switch (intel_crtc->base.cursor->state->crtc_w) { case 64: @@ -10032,18 +10031,17 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc, int y = cursor_state->crtc_y; u32 base = 0, pos = 0; - if (on) - base = intel_crtc->cursor_addr; + base = intel_crtc->cursor_addr; if (x >= intel_crtc->config->pipe_src_w) - base = 0; + on = false; if (y >= intel_crtc->config->pipe_src_h) - base = 0; + on = false; if (x < 0) { if (x + cursor_state->crtc_w <= 0) - base = 0; + on = false; pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT; x = -x; @@ -10052,16 +10050,13 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc, if (y < 0) { if (y + cursor_state->crtc_h <= 0) - base = 0; + on = false; pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT; y = -y; } pos |= y << CURSOR_Y_SHIFT; - if (base == 0 && intel_crtc->cursor_base == 0) - return; - I915_WRITE(CURPOS(pipe), pos); /* ILK+ do this automagically */ @@ -10072,9 +10067,9 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc, } if (IS_845G(dev) || IS_I865G(dev)) - i845_update_cursor(crtc, base); + i845_update_cursor(crtc, base, on); else - i9xx_update_cursor(crtc, base); + i9xx_update_cursor(crtc, base, on); } static bool cursor_size_ok(struct drm_device *dev, -- cgit v0.10.2 From 62d622c1f8d34bde3e3b9fd06f15c35d4028a8ff Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 20 Nov 2015 14:16:39 +0000 Subject: drm/i915: Set the map-and-fenceable flag for preallocated objects As we mark the preallocated objects as bound, we should also flag them correctly as being map-and-fenceable (if appropriate!) so that later users do not get confused and try and rebind the pinned vma in order to get a map-and-fenceable binding. Signed-off-by: Chris Wilson Cc: "Goel, Akash" Cc: Daniel Vetter Cc: Jesse Barnes Cc: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1448029000-10616-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter (cherry picked from commit d0710abbcd88b1ff17760e97d74a673e67b49ea1) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index a01e515..037a650 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2839,6 +2839,7 @@ i915_gem_object_ggtt_pin(struct drm_i915_gem_object *obj, int i915_vma_bind(struct i915_vma *vma, enum i915_cache_level cache_level, u32 flags); +void __i915_vma_set_map_and_fenceable(struct i915_vma *vma); int __must_check i915_vma_unbind(struct i915_vma *vma); /* * BEWARE: Do not use the function below unless you can _absolutely_ diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 32e6aad..3163518 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4080,6 +4080,29 @@ i915_vma_misplaced(struct i915_vma *vma, uint32_t alignment, uint64_t flags) return false; } +void __i915_vma_set_map_and_fenceable(struct i915_vma *vma) +{ + struct drm_i915_gem_object *obj = vma->obj; + bool mappable, fenceable; + u32 fence_size, fence_alignment; + + fence_size = i915_gem_get_gtt_size(obj->base.dev, + obj->base.size, + obj->tiling_mode); + fence_alignment = i915_gem_get_gtt_alignment(obj->base.dev, + obj->base.size, + obj->tiling_mode, + true); + + fenceable = (vma->node.size == fence_size && + (vma->node.start & (fence_alignment - 1)) == 0); + + mappable = (vma->node.start + fence_size <= + to_i915(obj->base.dev)->gtt.mappable_end); + + obj->map_and_fenceable = mappable && fenceable; +} + static int i915_gem_object_do_pin(struct drm_i915_gem_object *obj, struct i915_address_space *vm, @@ -4147,25 +4170,7 @@ i915_gem_object_do_pin(struct drm_i915_gem_object *obj, if (ggtt_view && ggtt_view->type == I915_GGTT_VIEW_NORMAL && (bound ^ vma->bound) & GLOBAL_BIND) { - bool mappable, fenceable; - u32 fence_size, fence_alignment; - - fence_size = i915_gem_get_gtt_size(obj->base.dev, - obj->base.size, - obj->tiling_mode); - fence_alignment = i915_gem_get_gtt_alignment(obj->base.dev, - obj->base.size, - obj->tiling_mode, - true); - - fenceable = (vma->node.size == fence_size && - (vma->node.start & (fence_alignment - 1)) == 0); - - mappable = (vma->node.start + fence_size <= - dev_priv->gtt.mappable_end); - - obj->map_and_fenceable = mappable && fenceable; - + __i915_vma_set_map_and_fenceable(vma); WARN_ON(flags & PIN_MAPPABLE && !obj->map_and_fenceable); } diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 43f35d1..86c7500 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -2676,6 +2676,7 @@ static int i915_gem_setup_global_gtt(struct drm_device *dev, return ret; } vma->bound |= GLOBAL_BIND; + __i915_vma_set_map_and_fenceable(vma); list_add_tail(&vma->mm_list, &ggtt_vm->inactive_list); } diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c index cdacf3f..87e919a 100644 --- a/drivers/gpu/drm/i915/i915_gem_stolen.c +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c @@ -687,6 +687,7 @@ i915_gem_object_create_stolen_for_preallocated(struct drm_device *dev, } vma->bound |= GLOBAL_BIND; + __i915_vma_set_map_and_fenceable(vma); list_add_tail(&vma->mm_list, &ggtt->inactive_list); } -- cgit v0.10.2 From a59fac67d31235730378180774fdb46f5a270f1e Mon Sep 17 00:00:00 2001 From: Matt Roper Date: Thu, 3 Dec 2015 11:37:36 -0800 Subject: drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we fail to reconstruct the BIOS fb (e.g., because the FB is too large), we'll be left with plane state that indicates the primary plane is visible yet has a NULL fb. This mismatch causes problems later on (e.g., for the watermark code). Since we've failed to reconstruct the BIOS FB, the best solution is to just disable the primary plane and pretend the BIOS never had it enabled. v2: Add intel_pre_disable_primary() call (Maarten) Cc: Daniel Vetter Cc: Ville Syrjälä Cc: Maarten Lankhorst Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Matt Roper Reviewed-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/1449171462-30763-2-git-send-email-matthew.d.roper@intel.com (cherry picked from commit 200757f5d7c6f7f7032a0a07bbb8c02a840bbf7d) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 1bdf995..13bc6d4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -116,6 +116,7 @@ static void skylake_pfit_enable(struct intel_crtc *crtc); static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force); static void ironlake_pfit_enable(struct intel_crtc *crtc); static void intel_modeset_setup_hw_state(struct drm_device *dev); +static void intel_pre_disable_primary(struct drm_crtc *crtc); typedef struct { int min, max; @@ -2607,6 +2608,8 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, struct drm_i915_gem_object *obj; struct drm_plane *primary = intel_crtc->base.primary; struct drm_plane_state *plane_state = primary->state; + struct drm_crtc_state *crtc_state = intel_crtc->base.state; + struct intel_plane *intel_plane = to_intel_plane(primary); struct drm_framebuffer *fb; if (!plane_config->fb) @@ -2643,6 +2646,18 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, } } + /* + * We've failed to reconstruct the BIOS FB. Current display state + * indicates that the primary plane is visible, but has a NULL FB, + * which will lead to problems later if we don't fix it up. The + * simplest solution is to just disable the primary plane now and + * pretend the BIOS never had it enabled. + */ + to_intel_plane_state(plane_state)->visible = false; + crtc_state->plane_mask &= ~(1 << drm_plane_index(primary)); + intel_pre_disable_primary(&intel_crtc->base); + intel_plane->disable_plane(primary, &intel_crtc->base); + return; valid_fb: -- cgit v0.10.2 From 5dc62fdd8383afbd2faca6b6e6ea1052b45b0124 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 5 Aug 2015 16:41:37 +0100 Subject: MIPS: uaccess: Fix strlen_user with EVA The strlen_user() function calls __strlen_kernel_asm in both branches of the eva_kernel_access() conditional. For EVA it should be calling __strlen_user_eva for user accesses, otherwise it will load from the kernel address space instead of the user address space, and the access checking will likely be ineffective at preventing it due to EVA's overlapping user and kernel address spaces. This was found after extending the test_user_copy module to cover user string access functions, which gave the following error with EVA: test_user_copy: illegal strlen_user passed Fortunately the use of strlen_user() has been all but eradicated from the mainline kernel, so only out of tree modules could be affected. Fixes: e3a9b07a9caf ("MIPS: asm: uaccess: Add EVA support for str*_user operations") Signed-off-by: James Hogan Cc: Markos Chandras Cc: Paul Burton Cc: Leonid Yegoshin Cc: linux-mips@linux-mips.org Cc: # 3.15.x- Patchwork: https://patchwork.linux-mips.org/patch/10842/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 5305d69..3f959c0 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -1384,7 +1384,7 @@ static inline long strlen_user(const char __user *s) might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" - __MODULE_JAL(__strlen_kernel_asm) + __MODULE_JAL(__strlen_user_asm) "move\t%0, $2" : "=r" (res) : "r" (s) -- cgit v0.10.2 From e7571f7fd66c77a760338340adbe41d994fe93ac Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 11 Dec 2015 11:32:57 +0000 Subject: drm/i915: Break busywaiting for requests on pending signals The busywait in __i915_spin_request() does not respect pending signals and so may consume the entire timeslice for the task instead of returning to userspace to handle the signal. In the worst case this could cause a delay in signal processing of 20ms, which would be a noticeable jitter in cursor tracking. If a higher resolution signal was being used, for example to provide fairness of a server timeslices between clients, we could expect to detect some unfairness between clients (i.e. some windows not updating as fast as others). This issue was noticed when inspecting a report of poor interactivity resulting from excessively high __i915_spin_request usage. Fixes regression from commit 2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2] Author: Chris Wilson Date: Tue Apr 7 16:20:41 2015 +0100 drm/i915: Optimistically spin for the request completion v2: Try to assess the impact of the bug Signed-off-by: Chris Wilson Reviewed-by: Tvrtko Ursulin Cc: Jens Axboe Cc; "Rogozhkin, Dmitry V" Cc: Daniel Vetter Cc: Tvrtko Ursulin Cc: Eero Tamminen Cc: "Rantala, Valtteri" Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-2-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 91b0c352ace9afec1fb51590c7b8bd60e0eb9fbd) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3163518..06631e1 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1146,7 +1146,7 @@ static bool missed_irq(struct drm_i915_private *dev_priv, return test_bit(ring->id, &dev_priv->gpu_error.missed_irq_rings); } -static int __i915_spin_request(struct drm_i915_gem_request *req) +static int __i915_spin_request(struct drm_i915_gem_request *req, int state) { unsigned long timeout; @@ -1158,6 +1158,9 @@ static int __i915_spin_request(struct drm_i915_gem_request *req) if (i915_gem_request_completed(req, true)) return 0; + if (signal_pending_state(state, current)) + break; + if (time_after_eq(jiffies, timeout)) break; @@ -1197,6 +1200,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req, struct drm_i915_private *dev_priv = dev->dev_private; const bool irq_test_in_progress = ACCESS_ONCE(dev_priv->gpu_error.test_irq_rings) & intel_ring_flag(ring); + int state = interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE; DEFINE_WAIT(wait); unsigned long timeout_expire; s64 before, now; @@ -1229,7 +1233,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req, before = ktime_get_raw_ns(); /* Optimistic spin for the next jiffie before touching IRQs */ - ret = __i915_spin_request(req); + ret = __i915_spin_request(req, state); if (ret == 0) goto out; @@ -1241,8 +1245,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req, for (;;) { struct timer_list timer; - prepare_to_wait(&ring->irq_queue, &wait, - interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); + prepare_to_wait(&ring->irq_queue, &wait, state); /* We need to check whether any gpu reset happened in between * the caller grabbing the seqno and now ... */ @@ -1260,7 +1263,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req, break; } - if (interruptible && signal_pending(current)) { + if (signal_pending_state(state, current)) { ret = -ERESTARTSYS; break; } -- cgit v0.10.2 From 6f06a2c45d8d714ea3b11a360b4a7191e52acaa4 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 5 Aug 2015 16:41:38 +0100 Subject: MIPS: uaccess: Take EVA into account in __copy_from_user() When EVA is in use, __copy_from_user() was unconditionally using the EVA instructions to read the user address space, however this can also be used for kernel access. If the address isn't a valid user address it will cause an address error or TLB exception, and if it is then user memory may be read instead of kernel memory. For example in the following stack trace from Linux v3.10 (changes since then will prevent this particular one still happening) kernel_sendmsg() set the user address limit to KERNEL_DS, and tcp_sendmsg() goes on to use __copy_from_user() with a kernel address in KSeg0. [<8002d434>] __copy_fromuser_common+0x10c/0x254 [<805710e0>] tcp_sendmsg+0x5f4/0xf00 [<804e8e3c>] sock_sendmsg+0x78/0xa0 [<804e8f28>] kernel_sendmsg+0x24/0x38 [<804ee0f8>] sock_no_sendpage+0x70/0x7c [<8017c820>] pipe_to_sendpage+0x80/0x98 [<8017c6b0>] splice_from_pipe_feed+0xa8/0x198 [<8017cc54>] __splice_from_pipe+0x4c/0x8c [<8017e844>] splice_from_pipe+0x58/0x78 [<8017e884>] generic_splice_sendpage+0x20/0x2c [<8017d690>] do_splice_from+0xb4/0x110 [<8017d710>] direct_splice_actor+0x24/0x30 [<8017d394>] splice_direct_to_actor+0xd8/0x208 [<8017d51c>] do_splice_direct+0x58/0x7c [<8014eaf4>] do_sendfile+0x1dc/0x39c [<8014f82c>] SyS_sendfile+0x90/0xf8 Add the eva_kernel_access() check in __copy_from_user() like the one in copy_from_user(). Signed-off-by: James Hogan Cc: Markos Chandras Cc: Paul Burton Cc: Leonid Yegoshin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10843/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 3f959c0..5014e18 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -1122,9 +1122,15 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n); __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - might_fault(); \ - __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ + if (eva_kernel_access()) { \ + __cu_len = __invoke_copy_from_kernel(__cu_to, \ + __cu_from, \ + __cu_len); \ + } else { \ + might_fault(); \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + } \ __cu_len; \ }) -- cgit v0.10.2 From f87a780f07b22b6dc4642dbaf44af65112076cb8 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 11 Dec 2015 11:32:58 +0000 Subject: drm/i915: Limit the busy wait on requests to 5us not 10ms! When waiting for high frequency requests, the finite amount of time required to set up the irq and wait upon it limits the response rate. By busywaiting on the request completion for a short while we can service the high frequency waits as quick as possible. However, if it is a slow request, we want to sleep as quickly as possible. The tradeoff between waiting and sleeping is roughly the time it takes to sleep on a request, on the order of a microsecond. Based on measurements of synchronous workloads from across big core and little atom, I have set the limit for busywaiting as 10 microseconds. In most of the synchronous cases, we can reduce the limit down to as little as 2 miscroseconds, but that leaves quite a few test cases regressing by factors of 3 and more. The code currently uses the jiffie clock, but that is far too coarse (on the order of 10 milliseconds) and results in poor interactivity as the CPU ends up being hogged by slow requests. To get microsecond resolution we need to use a high resolution timer. The cheapest of which is polling local_clock(), but that is only valid on the same CPU. If we switch CPUs because the task was preempted, we can also use that as an indicator that the system is too busy to waste cycles on spinning and we should sleep instead. __i915_spin_request was introduced in commit 2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2] Author: Chris Wilson Date: Tue Apr 7 16:20:41 2015 +0100 drm/i915: Optimistically spin for the request completion v2: Drop full u64 for unsigned long - the timer is 32bit wraparound safe, so we can use native register sizes on smaller architectures. Mention the approximate microseconds units for elapsed time and add some extra comments describing the reason for busywaiting. v3: Raise the limit to 10us v4: Now 5us. Reported-by: Jens Axboe Link: https://lkml.org/lkml/2015/11/12/621 Reviewed-by: Tvrtko Ursulin Cc: "Rogozhkin, Dmitry V" Cc: Daniel Vetter Cc: Tvrtko Ursulin Cc: Eero Tamminen Cc: "Rantala, Valtteri" Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-3-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit ca5b721e238226af1d767103ac852aeb8e4c0764) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 06631e1..8719fa2 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1146,14 +1146,57 @@ static bool missed_irq(struct drm_i915_private *dev_priv, return test_bit(ring->id, &dev_priv->gpu_error.missed_irq_rings); } +static unsigned long local_clock_us(unsigned *cpu) +{ + unsigned long t; + + /* Cheaply and approximately convert from nanoseconds to microseconds. + * The result and subsequent calculations are also defined in the same + * approximate microseconds units. The principal source of timing + * error here is from the simple truncation. + * + * Note that local_clock() is only defined wrt to the current CPU; + * the comparisons are no longer valid if we switch CPUs. Instead of + * blocking preemption for the entire busywait, we can detect the CPU + * switch and use that as indicator of system load and a reason to + * stop busywaiting, see busywait_stop(). + */ + *cpu = get_cpu(); + t = local_clock() >> 10; + put_cpu(); + + return t; +} + +static bool busywait_stop(unsigned long timeout, unsigned cpu) +{ + unsigned this_cpu; + + if (time_after(local_clock_us(&this_cpu), timeout)) + return true; + + return this_cpu != cpu; +} + static int __i915_spin_request(struct drm_i915_gem_request *req, int state) { unsigned long timeout; + unsigned cpu; + + /* When waiting for high frequency requests, e.g. during synchronous + * rendering split between the CPU and GPU, the finite amount of time + * required to set up the irq and wait upon it limits the response + * rate. By busywaiting on the request completion for a short while we + * can service the high frequency waits as quick as possible. However, + * if it is a slow request, we want to sleep as quickly as possible. + * The tradeoff between waiting and sleeping is roughly the time it + * takes to sleep on a request, on the order of a microsecond. + */ if (i915_gem_request_get_ring(req)->irq_refcount) return -EBUSY; - timeout = jiffies + 1; + timeout = local_clock_us(&cpu) + 5; while (!need_resched()) { if (i915_gem_request_completed(req, true)) return 0; @@ -1161,7 +1204,7 @@ static int __i915_spin_request(struct drm_i915_gem_request *req, int state) if (signal_pending_state(state, current)) break; - if (time_after_eq(jiffies, timeout)) + if (busywait_stop(timeout, cpu)) break; cpu_relax_lowlatency(); -- cgit v0.10.2 From 0f0cd472062eca6f9fac8be0cd5585f9a2df1ab2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 11 Dec 2015 11:32:59 +0000 Subject: drm/i915: Only spin whilst waiting on the current request Limit busywaiting only to the request currently being processed by the GPU. If the request is not currently being processed by the GPU, there is a very low likelihood of it being completed within the 2 microsecond spin timeout and so we will just be wasting CPU cycles. v2: Check for logical inversion when rebasing - we were incorrectly checking for this request being active, and instead busywaiting for when the GPU was not yet processing the request of interest. v3: Try another colour for the seqno names. v4: Another colour for the function names. v5: Remove the forced coherency when checking for the active request. On reflection and plenty of recent experimentation, the issue is not a cache coherency problem - but an irq/seqno ordering problem (timing issue). Here, we do not need the w/a to force ordering of the read with an interrupt. Signed-off-by: Chris Wilson Reviewed-by: Tvrtko Ursulin Cc: "Rogozhkin, Dmitry V" Cc: Daniel Vetter Cc: Tvrtko Ursulin Cc: Eero Tamminen Cc: "Rantala, Valtteri" Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-4-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 821485dc2ad665f136c57ee589bf7a8210160fe2) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 037a650..f4af19a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2193,8 +2193,17 @@ struct drm_i915_gem_request { struct drm_i915_private *i915; struct intel_engine_cs *ring; - /** GEM sequence number associated with this request. */ - uint32_t seqno; + /** GEM sequence number associated with the previous request, + * when the HWS breadcrumb is equal to this the GPU is processing + * this request. + */ + u32 previous_seqno; + + /** GEM sequence number associated with this request, + * when the HWS breadcrumb is equal or greater than this the GPU + * has finished processing this request. + */ + u32 seqno; /** Position in the ringbuffer of the start of the request */ u32 head; @@ -2911,15 +2920,17 @@ i915_seqno_passed(uint32_t seq1, uint32_t seq2) return (int32_t)(seq1 - seq2) >= 0; } +static inline bool i915_gem_request_started(struct drm_i915_gem_request *req, + bool lazy_coherency) +{ + u32 seqno = req->ring->get_seqno(req->ring, lazy_coherency); + return i915_seqno_passed(seqno, req->previous_seqno); +} + static inline bool i915_gem_request_completed(struct drm_i915_gem_request *req, bool lazy_coherency) { - u32 seqno; - - BUG_ON(req == NULL); - - seqno = req->ring->get_seqno(req->ring, lazy_coherency); - + u32 seqno = req->ring->get_seqno(req->ring, lazy_coherency); return i915_seqno_passed(seqno, req->seqno); } diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 8719fa2..f56af0a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1193,9 +1193,13 @@ static int __i915_spin_request(struct drm_i915_gem_request *req, int state) * takes to sleep on a request, on the order of a microsecond. */ - if (i915_gem_request_get_ring(req)->irq_refcount) + if (req->ring->irq_refcount) return -EBUSY; + /* Only spin if we know the GPU is processing this request */ + if (!i915_gem_request_started(req, true)) + return -EAGAIN; + timeout = local_clock_us(&cpu) + 5; while (!need_resched()) { if (i915_gem_request_completed(req, true)) @@ -1209,6 +1213,7 @@ static int __i915_spin_request(struct drm_i915_gem_request *req, int state) cpu_relax_lowlatency(); } + if (i915_gem_request_completed(req, false)) return 0; @@ -2600,6 +2605,7 @@ void __i915_add_request(struct drm_i915_gem_request *request, request->batch_obj = obj; request->emitted_jiffies = jiffies; + request->previous_seqno = ring->last_submitted_seqno; ring->last_submitted_seqno = request->seqno; list_add_tail(&request->list, &ring->request_list); -- cgit v0.10.2 From ef8dd37af85a8f37ca3a29074647511e52c56181 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 18 Dec 2015 19:24:39 +0200 Subject: drm/i915: Workaround CHV pipe C cursor fail MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Turns out CHV pipe C was glued on somewhat poorly, and there's something wrong with the cursor. If the cursor straddles the left screen edge, and is then moved away from the edge or disabled, the pipe will often underrun. If enough underruns are triggered quickly enough the pipe will fall over and die (it just scans out a solid color and reports a constant underrun). We need to turn the disp2d power well off and on again to recover the pipe. None of that is very nice for the user, so let's just refuse to place the cursor in the compromised position. The ddx appears to fall back to swcursor when the ioctl returns an error, so theoretically there's no loss of functionality for the user (discounting swcursor bugs). I suppose most cursors images actually have the hotspot not exactly at 0,0 so under typical conditions the fallback will in fact kick in as soon as the cursor touches the left edge of the screen. Any atomic compositor should anyway be prepared to fall back to GPU composition when things don't work out, so there should be no problem with those. Other things that I tried to solve this include flipping all display related clock gating knobs I could find, increasing the minimum gtt alignment all the way up to 512k. I also tried to see if there are more specific screen coordinates that hit the bug, but the findings were somewhat inconclusive. Sometimes the failures happen almost across the whole left edge, sometimes more at the very top and around the bottom half. I wasn't able to find any real pattern to these variations, so it seems our only choice is to just refuse to straddle the left screen edge at all. Cc: stable@vger.kernel.org Cc: Jason Plum Testcase: igt/kms_chv_cursor_fail Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92826 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1450459479-16286-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Daniel Vetter (cherry picked from commit b29ec92c4f5e6d45d8bae8194e664427a01c6687) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 13bc6d4..69e1587 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13728,6 +13728,7 @@ intel_check_cursor_plane(struct drm_plane *plane, struct drm_crtc *crtc = crtc_state->base.crtc; struct drm_framebuffer *fb = state->base.fb; struct drm_i915_gem_object *obj = intel_fb_obj(fb); + enum pipe pipe = to_intel_plane(plane)->pipe; unsigned stride; int ret; @@ -13761,6 +13762,22 @@ intel_check_cursor_plane(struct drm_plane *plane, return -EINVAL; } + /* + * There's something wrong with the cursor on CHV pipe C. + * If it straddles the left edge of the screen then + * moving it away from the edge or disabling it often + * results in a pipe underrun, and often that can lead to + * dead pipe (constant underrun reported, and it scans + * out just a solid color). To recover from that, the + * display power well must be turned off and on again. + * Refuse the put the cursor into that compromised position. + */ + if (IS_CHERRYVIEW(plane->dev) && pipe == PIPE_C && + state->visible && state->base.crtc_x < 0) { + DRM_DEBUG_KMS("CHV cursor C not allowed to straddle the left screen edge\n"); + return -EINVAL; + } + return 0; } -- cgit v0.10.2 From d6a428fb583738ad685c91a684748cdee7b2a05f Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 5 Aug 2015 16:41:39 +0100 Subject: MIPS: uaccess: Take EVA into account in [__]clear_user __clear_user() (and clear_user() which uses it), always access the user mode address space, which results in EVA store instructions when EVA is enabled even if the current user address limit is KERNEL_DS. Fix this by adding a new symbol __bzero_kernel for the normal kernel address space bzero in EVA mode, and call that from __clear_user() if eva_kernel_access(). Signed-off-by: James Hogan Cc: Markos Chandras Cc: Paul Burton Cc: Leonid Yegoshin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10844/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 5014e18..2e3b399 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -1235,16 +1235,28 @@ __clear_user(void __user *addr, __kernel_size_t size) { __kernel_size_t res; - might_fault(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, $0\n\t" - "move\t$6, %2\n\t" - __MODULE_JAL(__bzero) - "move\t%0, $6" - : "=r" (res) - : "r" (addr), "r" (size) - : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); + if (eva_kernel_access()) { + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, $0\n\t" + "move\t$6, %2\n\t" + __MODULE_JAL(__bzero_kernel) + "move\t%0, $6" + : "=r" (res) + : "r" (addr), "r" (size) + : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); + } else { + might_fault(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, $0\n\t" + "move\t$6, %2\n\t" + __MODULE_JAL(__bzero) + "move\t%0, $6" + : "=r" (res) + : "r" (addr), "r" (size) + : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); + } return res; } diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index 291af0b..e2b6ab7 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -17,6 +17,7 @@ #include #include +extern void *__bzero_kernel(void *__s, size_t __count); extern void *__bzero(void *__s, size_t __count); extern long __strncpy_from_kernel_nocheck_asm(char *__to, const char *__from, long __len); @@ -64,6 +65,7 @@ EXPORT_SYMBOL(__copy_from_user_eva); EXPORT_SYMBOL(__copy_in_user_eva); EXPORT_SYMBOL(__copy_to_user_eva); EXPORT_SYMBOL(__copy_user_inatomic_eva); +EXPORT_SYMBOL(__bzero_kernel); #endif EXPORT_SYMBOL(__bzero); EXPORT_SYMBOL(__strncpy_from_kernel_nocheck_asm); diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index b8e63fd..8f0019a 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -283,6 +283,8 @@ LEAF(memset) 1: #ifndef CONFIG_EVA FEXPORT(__bzero) +#else +FEXPORT(__bzero_kernel) #endif __BUILD_BZERO LEGACY_MODE -- cgit v0.10.2 From 57a2af6bbc7a4f1b145cc216c34476402836f0b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 14 Dec 2015 17:35:02 +0200 Subject: drm/i915: Kill intel_crtc->cursor_bo MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The vma may have been rebound between the last time the cursor was enabled and now, so skipping the cursor gtt offset deduction is not safe unless we would also reset cursor_bo to NULL when disabling the cursor. Just thow cursor_bo to the bin instead since it's lost all other uses thanks to universal plane support. Chris pointed out that cursor updates are currently too slow via universal planes that micro optimizations like these wouldn't even help. v2: Add a note about futility of micro optimizations (Chris) Cc: drm-intel-fixes@lists.freedesktop.org References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html Cc: Chris Wilson Cc: Takashi Iwai Cc: Jani Nikula Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1450107302-17171-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit 1264859d648c4bdc9f0a098efbff90cbf462a075) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 69e1587..beb0374 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13801,9 +13801,6 @@ intel_commit_cursor_plane(struct drm_plane *plane, crtc = crtc ? crtc : plane->crtc; intel_crtc = to_intel_crtc(crtc); - if (intel_crtc->cursor_bo == obj) - goto update; - if (!obj) addr = 0; else if (!INTEL_INFO(dev)->cursor_needs_physical) @@ -13812,9 +13809,7 @@ intel_commit_cursor_plane(struct drm_plane *plane, addr = obj->phys_handle->busaddr; intel_crtc->cursor_addr = addr; - intel_crtc->cursor_bo = obj; -update: if (crtc->state->active) intel_crtc_update_cursor(crtc, state->visible); } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index f2a1142..0d00f07 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -550,7 +550,6 @@ struct intel_crtc { int adjusted_x; int adjusted_y; - struct drm_i915_gem_object *cursor_bo; uint32_t cursor_addr; uint32_t cursor_cntl; uint32_t cursor_size; -- cgit v0.10.2 From 97f9010af05c15e0b7e6b4ef6ff8cb0ebb7e7715 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 11 Dec 2015 19:44:15 +0100 Subject: drm/i915: mdelay(10) considered harmful I missed this myself when reviewing commit 237ed86c693d8a8e4db476976aeb30df4deac74b Author: Sonika Jindal Date: Tue Sep 15 09:44:20 2015 +0530 drm/i915: Check live status before reading edid Long sleeps like this really shouldn't waste cpu cycles spinning. Cc: Sonika Jindal Cc: "Wang, Gary C" Link: http://patchwork.freedesktop.org/patch/msgid/1449859455-32609-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Sonika Jindal Signed-off-by: Daniel Vetter (cherry picked from commit 71a199bacb398ee54eeac001699257dda083a455) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 81cdd9f..12393df4 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1384,7 +1384,7 @@ intel_hdmi_detect(struct drm_connector *connector, bool force) while (!live_status && --retry) { live_status = intel_digital_port_connected(dev_priv, hdmi_to_dig_port(intel_hdmi)); - mdelay(10); + msleep(10); } if (!live_status) -- cgit v0.10.2 From a98728e0bb978fbe9246c93ea89198de612c22e6 Mon Sep 17 00:00:00 2001 From: Gary Wang Date: Tue, 15 Dec 2015 12:40:30 +0800 Subject: drm/i915: Correct max delay for HDMI hotplug live status checking The total delay of HDMI hotplug detecting with 30ms have already been split into a resolution of 3 retries of 10ms each, for the worst cases. But it still suffered from only waiting 10ms at most in intel_hdmi_detect(). This patch corrects it by reading hotplug status with 4 times at most for 30ms delay. v2: - straight up to loop execution for more clear in code readability - mdelay will replace with msleep by Daniel's new patch drm/i915: mdelay(10) considered harmful - suggest to re-evaluate try times for being compatible to old HDMI monitor Reviewed-by: Cooper Chiou Tested-by: Gary Wang Cc: Jani Nikula Cc: Daniel Vetter Cc: Gavin Hindman Cc: Sonika Jindal Cc: Shashank Sharma Signed-off-by: Gary Wang [danvet: fixup conflict with s/mdelay/msleep/ patch.] Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Daniel Vetter (cherry picked from commit 61fb3980dd396880ffba48523b1e27579868b82b) Signed-off-by: Jani Nikula diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 12393df4..64086f2 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1374,17 +1374,18 @@ intel_hdmi_detect(struct drm_connector *connector, bool force) struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); struct drm_i915_private *dev_priv = to_i915(connector->dev); bool live_status = false; - unsigned int retry = 3; + unsigned int try; DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, connector->name); intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS); - while (!live_status && --retry) { + for (try = 0; !live_status && try < 4; try++) { + if (try) + msleep(10); live_status = intel_digital_port_connected(dev_priv, hdmi_to_dig_port(intel_hdmi)); - msleep(10); } if (!live_status) -- cgit v0.10.2 From f3575e230cf8537951ebe3cc19974c5db2ff4f1c Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 5 Aug 2015 15:42:40 -0700 Subject: MIPS: CPS: drop .set mips64r2 directives Commit 977e043d5ea1 ("MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2") leads to .set mips64r2 directives being present in 32 bit (ie. CONFIG_32BIT=y) kernels. This is incorrect & leads to MIPS64 instructions being emitted by the assembler when expanding pseudo-instructions. For example the "move" instruction can legitimately be expanded to a "daddu". This causes problems when the kernel is run on a MIPS32 CPU, as CONFIG_32BIT kernels of course often are... Fix this by dropping the .set directives entirely now that Kconfig should be ensuring that kernels including this code are built with a suitable -march= compiler flag. Signed-off-by: Paul Burton Cc: Markos Chandras Cc: James Hogan Cc: # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10869/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index 8fd5a27..ac81edd 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -257,7 +257,6 @@ LEAF(mips_cps_core_init) has_mt t0, 3f .set push - .set mips64r2 .set mt /* Only allow 1 TC per VPE to execute... */ @@ -376,7 +375,6 @@ LEAF(mips_cps_boot_vpes) nop .set push - .set mips64r2 .set mt 1: /* Enter VPE configuration state */ -- cgit v0.10.2 From 2a037f310bab89b7db5b86c7954cf69c229c87ca Mon Sep 17 00:00:00 2001 From: Qais Yousef Date: Tue, 8 Dec 2015 10:11:43 +0000 Subject: MIPS: VDSO: Fix build error Commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") introduced a build error. For MIPS VDSO to be compiled it requires binutils version 2.25 or above but the check in the Makefile had inverted logic causing it to be compiled in if binutils is below 2.25. This fixes the following compilation error: CC arch/mips/vdso/gettimeofday.o /tmp/ccsExcUd.s: Assembler messages: /tmp/ccsExcUd.s:62: Error: can't resolve `_start' {*UND* section} - `L0' {.text section} /tmp/ccsExcUd.s:467: Error: can't resolve `_start' {*UND* section} - `L0' {.text section} make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 make[1]: *** [arch/mips/vdso] Error 2 make: *** [arch/mips] Error 2 [ralf@linux-mips: Fixed Sergei's complaint on the formatting of the cited commit and generally reformatted the log message.] Signed-off-by: Qais Yousef Cc: alex@alex-smith.me.uk Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11745/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index ef5f348..018f8c7 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -26,8 +26,8 @@ aflags-vdso := $(ccflags-vdso) \ # the comments on that file. # ifndef CONFIG_CPU_MIPSR6 - ifeq ($(call ld-ifversion, -gt, 22400000, y),) - $(warning MIPS VDSO requires binutils > 2.24) + ifeq ($(call ld-ifversion, -lt, 22500000, y),) + $(warning MIPS VDSO requires binutils >= 2.25) obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y)) ccflags-vdso += -DDISABLE_MIPS_VDSO endif -- cgit v0.10.2 From 0d96e4bab2855a030077cc695a3563fd7cb0e7d8 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 18 Dec 2015 19:16:57 +0800 Subject: crypto: algif_skcipher - Use new skcipher interface This patch replaces uses of ablkcipher with the new skcipher interface. Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu Tested-by: diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c index af31a0e..973fe45 100644 --- a/crypto/algif_skcipher.c +++ b/crypto/algif_skcipher.c @@ -47,7 +47,7 @@ struct skcipher_ctx { bool merge; bool enc; - struct ablkcipher_request req; + struct skcipher_request req; }; struct skcipher_async_rsgl { @@ -64,13 +64,13 @@ struct skcipher_async_req { }; #define GET_SREQ(areq, ctx) (struct skcipher_async_req *)((char *)areq + \ - crypto_ablkcipher_reqsize(crypto_ablkcipher_reqtfm(&ctx->req))) + crypto_skcipher_reqsize(crypto_skcipher_reqtfm(&ctx->req))) #define GET_REQ_SIZE(ctx) \ - crypto_ablkcipher_reqsize(crypto_ablkcipher_reqtfm(&ctx->req)) + crypto_skcipher_reqsize(crypto_skcipher_reqtfm(&ctx->req)) #define GET_IV_SIZE(ctx) \ - crypto_ablkcipher_ivsize(crypto_ablkcipher_reqtfm(&ctx->req)) + crypto_skcipher_ivsize(crypto_skcipher_reqtfm(&ctx->req)) #define MAX_SGL_ENTS ((4096 - sizeof(struct skcipher_sg_list)) / \ sizeof(struct scatterlist) - 1) @@ -302,8 +302,8 @@ static int skcipher_sendmsg(struct socket *sock, struct msghdr *msg, struct sock *sk = sock->sk; struct alg_sock *ask = alg_sk(sk); struct skcipher_ctx *ctx = ask->private; - struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(&ctx->req); - unsigned ivsize = crypto_ablkcipher_ivsize(tfm); + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(&ctx->req); + unsigned ivsize = crypto_skcipher_ivsize(tfm); struct skcipher_sg_list *sgl; struct af_alg_control con = {}; long copied = 0; @@ -507,7 +507,7 @@ static int skcipher_recvmsg_async(struct socket *sock, struct msghdr *msg, struct skcipher_sg_list *sgl; struct scatterlist *sg; struct skcipher_async_req *sreq; - struct ablkcipher_request *req; + struct skcipher_request *req; struct skcipher_async_rsgl *last_rsgl = NULL; unsigned int txbufs = 0, len = 0, tx_nents = skcipher_all_sg_nents(ctx); unsigned int reqlen = sizeof(struct skcipher_async_req) + @@ -531,9 +531,9 @@ static int skcipher_recvmsg_async(struct socket *sock, struct msghdr *msg, } sg_init_table(sreq->tsg, tx_nents); memcpy(sreq->iv, ctx->iv, GET_IV_SIZE(ctx)); - ablkcipher_request_set_tfm(req, crypto_ablkcipher_reqtfm(&ctx->req)); - ablkcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, - skcipher_async_cb, sk); + skcipher_request_set_tfm(req, crypto_skcipher_reqtfm(&ctx->req)); + skcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, + skcipher_async_cb, sk); while (iov_iter_count(&msg->msg_iter)) { struct skcipher_async_rsgl *rsgl; @@ -608,10 +608,10 @@ static int skcipher_recvmsg_async(struct socket *sock, struct msghdr *msg, if (mark) sg_mark_end(sreq->tsg + txbufs - 1); - ablkcipher_request_set_crypt(req, sreq->tsg, sreq->first_sgl.sgl.sg, - len, sreq->iv); - err = ctx->enc ? crypto_ablkcipher_encrypt(req) : - crypto_ablkcipher_decrypt(req); + skcipher_request_set_crypt(req, sreq->tsg, sreq->first_sgl.sgl.sg, + len, sreq->iv); + err = ctx->enc ? crypto_skcipher_encrypt(req) : + crypto_skcipher_decrypt(req); if (err == -EINPROGRESS) { atomic_inc(&ctx->inflight); err = -EIOCBQUEUED; @@ -632,7 +632,7 @@ static int skcipher_recvmsg_sync(struct socket *sock, struct msghdr *msg, struct sock *sk = sock->sk; struct alg_sock *ask = alg_sk(sk); struct skcipher_ctx *ctx = ask->private; - unsigned bs = crypto_ablkcipher_blocksize(crypto_ablkcipher_reqtfm( + unsigned bs = crypto_skcipher_blocksize(crypto_skcipher_reqtfm( &ctx->req)); struct skcipher_sg_list *sgl; struct scatterlist *sg; @@ -669,14 +669,13 @@ static int skcipher_recvmsg_sync(struct socket *sock, struct msghdr *msg, if (!used) goto free; - ablkcipher_request_set_crypt(&ctx->req, sg, - ctx->rsgl.sg, used, - ctx->iv); + skcipher_request_set_crypt(&ctx->req, sg, ctx->rsgl.sg, used, + ctx->iv); err = af_alg_wait_for_completion( ctx->enc ? - crypto_ablkcipher_encrypt(&ctx->req) : - crypto_ablkcipher_decrypt(&ctx->req), + crypto_skcipher_encrypt(&ctx->req) : + crypto_skcipher_decrypt(&ctx->req), &ctx->completion); free: @@ -751,17 +750,17 @@ static struct proto_ops algif_skcipher_ops = { static void *skcipher_bind(const char *name, u32 type, u32 mask) { - return crypto_alloc_ablkcipher(name, type, mask); + return crypto_alloc_skcipher(name, type, mask); } static void skcipher_release(void *private) { - crypto_free_ablkcipher(private); + crypto_free_skcipher(private); } static int skcipher_setkey(void *private, const u8 *key, unsigned int keylen) { - return crypto_ablkcipher_setkey(private, key, keylen); + return crypto_skcipher_setkey(private, key, keylen); } static void skcipher_wait(struct sock *sk) @@ -778,13 +777,13 @@ static void skcipher_sock_destruct(struct sock *sk) { struct alg_sock *ask = alg_sk(sk); struct skcipher_ctx *ctx = ask->private; - struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(&ctx->req); + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(&ctx->req); if (atomic_read(&ctx->inflight)) skcipher_wait(sk); skcipher_free_sgl(sk); - sock_kzfree_s(sk, ctx->iv, crypto_ablkcipher_ivsize(tfm)); + sock_kzfree_s(sk, ctx->iv, crypto_skcipher_ivsize(tfm)); sock_kfree_s(sk, ctx, ctx->len); af_alg_release_parent(sk); } @@ -793,20 +792,20 @@ static int skcipher_accept_parent(void *private, struct sock *sk) { struct skcipher_ctx *ctx; struct alg_sock *ask = alg_sk(sk); - unsigned int len = sizeof(*ctx) + crypto_ablkcipher_reqsize(private); + unsigned int len = sizeof(*ctx) + crypto_skcipher_reqsize(private); ctx = sock_kmalloc(sk, len, GFP_KERNEL); if (!ctx) return -ENOMEM; - ctx->iv = sock_kmalloc(sk, crypto_ablkcipher_ivsize(private), + ctx->iv = sock_kmalloc(sk, crypto_skcipher_ivsize(private), GFP_KERNEL); if (!ctx->iv) { sock_kfree_s(sk, ctx, len); return -ENOMEM; } - memset(ctx->iv, 0, crypto_ablkcipher_ivsize(private)); + memset(ctx->iv, 0, crypto_skcipher_ivsize(private)); INIT_LIST_HEAD(&ctx->tsgl); ctx->len = len; @@ -819,9 +818,9 @@ static int skcipher_accept_parent(void *private, struct sock *sk) ask->private = ctx; - ablkcipher_request_set_tfm(&ctx->req, private); - ablkcipher_request_set_callback(&ctx->req, CRYPTO_TFM_REQ_MAY_BACKLOG, - af_alg_complete, &ctx->completion); + skcipher_request_set_tfm(&ctx->req, private); + skcipher_request_set_callback(&ctx->req, CRYPTO_TFM_REQ_MAY_BACKLOG, + af_alg_complete, &ctx->completion); sk->sk_destruct = skcipher_sock_destruct; -- cgit v0.10.2 From ec7b97208aaed46bd3fbe166d5909228c380a720 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 27 Nov 2015 19:17:01 +0100 Subject: MIPS: Fix build error due to unused variables. c861519fcf95b2d46cb4275903423b43ae150a40 ("MIPS: Fix delay loops which may be removed by GCC.") which made it upstream was an outdated version of the patch and is lacking some the removal of two variables that became unused thus resulting in further warnings and build breakage. The commit from ae878615d7cee5d7346946cf1ae1b60e427013c2 was correct however. Signed-off-by: Ralf Baechle diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c index dbbeccc..a245cad 100644 --- a/arch/mips/pci/pci-rt2880.c +++ b/arch/mips/pci/pci-rt2880.c @@ -221,7 +221,6 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) static int rt288x_pci_probe(struct platform_device *pdev) { void __iomem *io_map_base; - int i; rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE); diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c index 78b2ef4..9d293b3 100644 --- a/arch/mips/pmcs-msp71xx/msp_setup.c +++ b/arch/mips/pmcs-msp71xx/msp_setup.c @@ -39,7 +39,6 @@ extern void msp_serial_setup(void); void msp7120_reset(void) { void *start, *end, *iptr; - register int i; /* Diasble all interrupts */ local_irq_disable(); diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c index db8f88b..6afa343 100644 --- a/arch/mips/sni/reset.c +++ b/arch/mips/sni/reset.c @@ -26,7 +26,7 @@ static inline void kb_wait(void) /* XXX This ends up at the ARC firmware prompt ... */ void sni_machine_restart(char *command) { - int i, j; + int i; /* This does a normal via the keyboard controller like a PC. We can do that easier ... */ -- cgit v0.10.2 From a7f2d7865720ff13d5b0f2a3bb1fd80dc3d7a73f Mon Sep 17 00:00:00 2001 From: Alexis Dambricourt Date: Mon, 14 Dec 2015 15:39:34 +0100 Subject: KVM: MTRR: fix fixed MTRR segment look up This fixes the slow-down of VM running with pci-passthrough, since some MTRR range changed from MTRR_TYPE_WRBACK to MTRR_TYPE_UNCACHABLE. Memory in the 0K-640K range was incorrectly treated as uncacheable. Fixes: f7bfb57b3e89ff89c0da9f93dedab89f68d6ca27 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Cc: qemu-stable@nongnu.org Signed-off-by: Alexis Dambricourt [Use correct BZ for "Fixes" annotation. - Paolo] Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c index 9e8bf13..adc54e1 100644 --- a/arch/x86/kvm/mtrr.c +++ b/arch/x86/kvm/mtrr.c @@ -267,7 +267,7 @@ static int fixed_mtrr_addr_to_seg(u64 addr) for (seg = 0; seg < seg_num; seg++) { mtrr_seg = &fixed_seg_table[seg]; - if (mtrr_seg->start >= addr && addr < mtrr_seg->end) + if (mtrr_seg->start <= addr && addr < mtrr_seg->end) return seg; } -- cgit v0.10.2 From fa7c4ebd5ae0c22f9908436303106a9ffcf0cf42 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 14 Dec 2015 16:57:31 +0100 Subject: KVM: MTRR: observe maxphyaddr from guest CPUID, not host Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU. This is wrong, because var_mtrr_range's mask variable then is discontiguous (like FF00FFFF000, where the first run of 0s corresponds to the bits between host and guest maxphyaddr). Instead always set up the masks to be full 64-bit values---we know that the reserved bits at the top are zero, and we can restore them when reading the MSR. This way var_mtrr_range gets a mask that just works. Fixes: a13842dc668b40daef4327294a6d3bdc8bd30276 Cc: qemu-stable@nongnu.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c index adc54e1..7747b6d 100644 --- a/arch/x86/kvm/mtrr.c +++ b/arch/x86/kvm/mtrr.c @@ -300,7 +300,6 @@ static void var_mtrr_range(struct kvm_mtrr_range *range, u64 *start, u64 *end) *start = range->base & PAGE_MASK; mask = range->mask & PAGE_MASK; - mask |= ~0ULL << boot_cpu_data.x86_phys_bits; /* This cannot overflow because writing to the reserved bits of * variable MTRRs causes a #GP. @@ -356,10 +355,14 @@ static void set_var_mtrr_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data) if (var_mtrr_range_is_valid(cur)) list_del(&mtrr_state->var_ranges[index].node); + /* Extend the mask with all 1 bits to the left, since those + * bits must implicitly be 0. The bits are then cleared + * when reading them. + */ if (!is_mtrr_mask) cur->base = data; else - cur->mask = data; + cur->mask = data | (-1LL << cpuid_maxphyaddr(vcpu)); /* add it to the list if it's enabled. */ if (var_mtrr_range_is_valid(cur)) { @@ -426,6 +429,8 @@ int kvm_mtrr_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) *pdata = vcpu->arch.mtrr_state.var_ranges[index].base; else *pdata = vcpu->arch.mtrr_state.var_ranges[index].mask; + + *pdata &= (1ULL << cpuid_maxphyaddr(vcpu)) - 1; } return 0; -- cgit v0.10.2 From e24dea2afc6a0852983dc741072d8e96155e13f5 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 22 Dec 2015 15:20:00 +0100 Subject: KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID Virtual machines can be run with CPUID such that there are no MTRRs. In that case, the firmware will never enable MTRRs and it is obviously undesirable to run the guest entirely with UC memory. Check out guest CPUID, and use WB memory if MTRR do not exist. Cc: qemu-stable@nongnu.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index 06332cb..3f5c48d 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -38,6 +38,14 @@ static inline bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu) return best && (best->ecx & bit(X86_FEATURE_XSAVE)); } +static inline bool guest_cpuid_has_mtrr(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 1, 0); + return best && (best->edx & bit(X86_FEATURE_MTRR)); +} + static inline bool guest_cpuid_has_tsc_adjust(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best; diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c index 7747b6d..3f8c732 100644 --- a/arch/x86/kvm/mtrr.c +++ b/arch/x86/kvm/mtrr.c @@ -120,14 +120,22 @@ static u8 mtrr_default_type(struct kvm_mtrr *mtrr_state) return mtrr_state->deftype & IA32_MTRR_DEF_TYPE_TYPE_MASK; } -static u8 mtrr_disabled_type(void) +static u8 mtrr_disabled_type(struct kvm_vcpu *vcpu) { /* * Intel SDM 11.11.2.2: all MTRRs are disabled when * IA32_MTRR_DEF_TYPE.E bit is cleared, and the UC * memory type is applied to all of physical memory. + * + * However, virtual machines can be run with CPUID such that + * there are no MTRRs. In that case, the firmware will never + * enable MTRRs and it is obviously undesirable to run the + * guest entirely with UC memory and we use WB. */ - return MTRR_TYPE_UNCACHABLE; + if (guest_cpuid_has_mtrr(vcpu)) + return MTRR_TYPE_UNCACHABLE; + else + return MTRR_TYPE_WRBACK; } /* @@ -675,7 +683,7 @@ u8 kvm_mtrr_get_guest_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn) } if (iter.mtrr_disabled) - return mtrr_disabled_type(); + return mtrr_disabled_type(vcpu); /* not contained in any MTRRs. */ if (type == -1) -- cgit v0.10.2 From 0185604c2d82c560dab2f2933a18f797e74ab5a8 Mon Sep 17 00:00:00 2001 From: Andrew Honig Date: Wed, 18 Nov 2015 14:50:23 -0800 Subject: KVM: x86: Reload pit counters for all channels when restoring state Currently if userspace restores the pit counters with a count of 0 on channels 1 or 2 and the guest attempts to read the count on those channels, then KVM will perform a mod of 0 and crash. This will ensure that 0 values are converted to 65536 as per the spec. This is CVE-2015-7513. Signed-off-by: Andy Honig Signed-off-by: Paolo Bonzini diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b84ba4b..7ffc224 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3572,9 +3572,11 @@ static int kvm_vm_ioctl_get_pit(struct kvm *kvm, struct kvm_pit_state *ps) static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps) { + int i; mutex_lock(&kvm->arch.vpit->pit_state.lock); memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state)); - kvm_pit_load_count(kvm, 0, ps->channels[0].count, 0); + for (i = 0; i < 3; i++) + kvm_pit_load_count(kvm, i, ps->channels[i].count, 0); mutex_unlock(&kvm->arch.vpit->pit_state.lock); return 0; } @@ -3593,6 +3595,7 @@ static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps) static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps) { int start = 0; + int i; u32 prev_legacy, cur_legacy; mutex_lock(&kvm->arch.vpit->pit_state.lock); prev_legacy = kvm->arch.vpit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY; @@ -3602,7 +3605,8 @@ static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps) memcpy(&kvm->arch.vpit->pit_state.channels, &ps->channels, sizeof(kvm->arch.vpit->pit_state.channels)); kvm->arch.vpit->pit_state.flags = ps->flags; - kvm_pit_load_count(kvm, 0, kvm->arch.vpit->pit_state.channels[0].count, start); + for (i = 0; i < 3; i++) + kvm_pit_load_count(kvm, i, kvm->arch.vpit->pit_state.channels[i].count, start); mutex_unlock(&kvm->arch.vpit->pit_state.lock); return 0; } -- cgit v0.10.2 From b5875222de2fb91339db79a753677ba4f68120d0 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Fri, 11 Dec 2015 13:14:28 -0700 Subject: NVMe: IO ending fixes on surprise removal This patch fixes a lost request discovered during IO + hot removal. The driver's pci removal deletes gendisks prior to shutting down the controller to allow dirty data to sync. Dirty data can not be synced on a surprise removal, though, and would potentially block indefinitely. The driver previously had marked the queue as dying in this scenario to prevent new requests from attempting, however it will still block for requests that already entered the queue. This patch fixes this by quiescing IO first, then aborting the requeued requests before deleting disks. Reported-by: Sujith Pandel Signed-off-by: Keith Busch Tested-by: Sujith Pandel Signed-off-by: Jens Axboe diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 9e294ff..0c67b57 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2540,8 +2540,17 @@ static void nvme_ns_remove(struct nvme_ns *ns) { bool kill = nvme_io_incapable(ns->dev) && !blk_queue_dying(ns->queue); - if (kill) + if (kill) { blk_set_queue_dying(ns->queue); + + /* + * The controller was shutdown first if we got here through + * device removal. The shutdown may requeue outstanding + * requests. These need to be aborted immediately so + * del_gendisk doesn't block indefinitely for their completion. + */ + blk_mq_abort_requeue_list(ns->queue); + } if (ns->disk->flags & GENHD_FL_UP) del_gendisk(ns->disk); if (kill || !blk_queue_dying(ns->queue)) { @@ -2977,6 +2986,15 @@ static void nvme_dev_remove(struct nvme_dev *dev) { struct nvme_ns *ns, *next; + if (nvme_io_incapable(dev)) { + /* + * If the device is not capable of IO (surprise hot-removal, + * for example), we need to quiesce prior to deleting the + * namespaces. This will end outstanding requests and prevent + * attempts to sync dirty data. + */ + nvme_dev_shutdown(dev); + } list_for_each_entry_safe(ns, next, &dev->namespaces, list) nvme_ns_remove(ns); } -- cgit v0.10.2 From 23688bf4f830a89866fd0ed3501e342a7360fe4f Mon Sep 17 00:00:00 2001 From: Junichi Nomura Date: Tue, 22 Dec 2015 10:23:44 -0700 Subject: block: ensure to split after potentially bouncing a bio blk_queue_bio() does split then bounce, which makes the segment counting based on pages before bouncing and could go wrong. Move the split to after bouncing, like we do for blk-mq, and the we fix the issue of having the bio count for segments be wrong. Fixes: 54efd50bfd87 ("block: make generic_make_request handle arbitrarily sized bios") Cc: stable@vger.kernel.org Tested-by: Artem S. Tashkinov Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 3636be4..c487b94 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1689,8 +1689,6 @@ static blk_qc_t blk_queue_bio(struct request_queue *q, struct bio *bio) struct request *req; unsigned int request_count = 0; - blk_queue_split(q, &bio, q->bio_split); - /* * low level driver can indicate that it wants pages above a * certain limit bounced to low memory (ie for highmem, or even @@ -1698,6 +1696,8 @@ static blk_qc_t blk_queue_bio(struct request_queue *q, struct bio *bio) */ blk_queue_bounce(q, &bio); + blk_queue_split(q, &bio, q->bio_split); + if (bio_integrity_enabled(bio) && bio_integrity_prep(bio)) { bio->bi_error = -EIO; bio_endio(bio); -- cgit v0.10.2 From e8271201462710dbbaa0448b768428606724ca90 Mon Sep 17 00:00:00 2001 From: Mike Krinkin Date: Tue, 15 Dec 2015 12:56:40 +0300 Subject: null_blk: fix use-after-free error blk_end_request_all may free request, so we need to save request_queue pointer before blk_end_request_all call. The problem was introduced in commit cf8ecc5a8455266f8d51 ("null_blk: guarantee device restart in all irq modes") and causes general protection fault with slab poisoning enabled. Fixes: cf8ecc5a8455266f8d51 ("null_blk: guarantee device restart in all irq modes") Signed-off-by: Mike Krinkin Reviewed-by: Ming Lei Signed-off-by: Jens Axboe diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c index 8162475..a428e4e 100644 --- a/drivers/block/null_blk.c +++ b/drivers/block/null_blk.c @@ -219,6 +219,9 @@ static void end_cmd(struct nullb_cmd *cmd) { struct request_queue *q = NULL; + if (cmd->rq) + q = cmd->rq->q; + switch (queue_mode) { case NULL_Q_MQ: blk_mq_end_request(cmd->rq, 0); @@ -232,9 +235,6 @@ static void end_cmd(struct nullb_cmd *cmd) goto free_cmd; } - if (cmd->rq) - q = cmd->rq->q; - /* Restart queue if needed, as we are freeing a tag */ if (q && !q->mq_ops && blk_queue_stopped(q)) { unsigned long flags; -- cgit v0.10.2 From 427d6e4812cf16fa6defccdcdfae2d60bfeb43b2 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 16 Dec 2015 17:14:45 +0800 Subject: bus: sunxi-rsb: Fix primary PMIC mapping hardware address The primary PMICs use 0x3a3 as their hardware address, not 0x3e3. Signed-off-by: Chen-Yu Tsai Signed-off-by: Olof Johansson diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index 0cfcb39..f951b35 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -527,7 +527,7 @@ static int sunxi_rsb_init_device_mode(struct sunxi_rsb *rsb) */ static const struct sunxi_rsb_addr_map sunxi_rsb_addr_maps[] = { - { 0x3e3, 0x2d }, /* Primary PMIC: AXP223, AXP809, AXP81X, ... */ + { 0x3a3, 0x2d }, /* Primary PMIC: AXP223, AXP809, AXP81X, ... */ { 0x745, 0x3a }, /* Secondary PMIC: AXP806, ... */ { 0xe89, 0x45 }, /* Peripheral IC: AC100, ... */ }; -- cgit v0.10.2 From bccd240fc8ac2df7d7a957e29c6d8fd7da10f86f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 16 Dec 2015 17:14:46 +0800 Subject: bus: sunxi-rsb: Fix peripheral IC mapping runtime address 0x4e is the runtime address normally associated with perihperal ICs. 0x45 is not a valid runtime address. Signed-off-by: Chen-Yu Tsai Signed-off-by: Olof Johansson diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index f951b35..25996e2 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -529,7 +529,7 @@ static int sunxi_rsb_init_device_mode(struct sunxi_rsb *rsb) static const struct sunxi_rsb_addr_map sunxi_rsb_addr_maps[] = { { 0x3a3, 0x2d }, /* Primary PMIC: AXP223, AXP809, AXP81X, ... */ { 0x745, 0x3a }, /* Secondary PMIC: AXP806, ... */ - { 0xe89, 0x45 }, /* Peripheral IC: AC100, ... */ + { 0xe89, 0x4e }, /* Peripheral IC: AC100, ... */ }; static u8 sunxi_rsb_get_rtaddr(u16 hwaddr) -- cgit v0.10.2 From ce8c839b74e3017996fad4e1b7ba2e2625ede82f Mon Sep 17 00:00:00 2001 From: Vijay Pandurangan Date: Fri, 18 Dec 2015 14:34:59 -0500 Subject: =?UTF-8?q?veth:=20don=E2=80=99t=20modify=20ip=5Fsummed;=20doing?= =?UTF-8?q?=20so=20treats=20packets=20with=20bad=20checksums=20as=20good.?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Packets that arrive from real hardware devices have ip_summed == CHECKSUM_UNNECESSARY if the hardware verified the checksums, or CHECKSUM_NONE if the packet is bad or it was unable to verify it. The current version of veth will replace CHECKSUM_NONE with CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to a veth device to be delivered to the application. This caused applications at Twitter to receive corrupt data when network hardware was corrupting packets. We believe this was added as an optimization to skip computing and verifying checksums for communication between containers. However, locally generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as written does nothing for them. As far as we can tell, after removing this code, these packets are transmitted from one stack to another unmodified (tcpdump shows invalid checksums on both sides, as expected), and they are delivered correctly to applications. We didn’t test every possible network configuration, but we tried a few common ones such as bridging containers, using NAT between the host and a container, and routing from hardware devices to containers. We have effectively deployed this in production at Twitter (by disabling RX checksum offloading on veth devices). This code dates back to the first version of the driver, commit ("[NET]: Virtual ethernet device driver"), so I suspect this bug occurred mostly because the driver API has evolved significantly since then. Commit <0b7967503dc97864f283a> ("net/veth: Fix packet checksumming") (in December 2010) fixed this for packets that get created locally and sent to hardware devices, by not changing CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming in from hardware devices. Co-authored-by: Evan Jones Signed-off-by: Evan Jones Cc: Nicolas Dichtel Cc: Phil Sutter Cc: Toshiaki Makita Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vijay Pandurangan Acked-by: Cong Wang Signed-off-by: David S. Miller diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 0ef4a5a..ba21d07 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -117,12 +117,6 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) kfree_skb(skb); goto drop; } - /* don't change ip_summed == CHECKSUM_PARTIAL, as that - * will cause bad checksum on forwarded packets - */ - if (skb->ip_summed == CHECKSUM_NONE && - rcv->features & NETIF_F_RXCSUM) - skb->ip_summed = CHECKSUM_UNNECESSARY; if (likely(dev_forward_skb(rcv, skb) == NET_RX_SUCCESS)) { struct pcpu_vstats *stats = this_cpu_ptr(dev->vstats); -- cgit v0.10.2 From 5cbf20c747987346f8352b156e3f05d3b84ac4ac Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 20 Dec 2015 01:48:04 +0300 Subject: sh_eth: fix 16-bit descriptor field access endianness too Commit 1299653affa4 ("sh_eth: fix descriptor access endianness") only addressed the 32-bit buffer address field byte-swapping but the driver still accesses 16-bit frame/buffer length descriptor fields without the necessary byte-swapping -- which should affect the big-endian kernels. In order to be able to use {cpu|edmac}_to_{edmac|cpu}(), we need to declare the RX/TX descriptor word 1 as a 32-bit field and use shifts/masking to access the 16-bit subfields (which gets rid of the ugly #ifdef'ery too)... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index a0eaf50..6a8fc0f 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1167,6 +1167,7 @@ static void sh_eth_ring_format(struct net_device *ndev) int tx_ringsize = sizeof(*txdesc) * mdp->num_tx_ring; int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN + 32 - 1; dma_addr_t dma_addr; + u32 buf_len; mdp->cur_rx = 0; mdp->cur_tx = 0; @@ -1187,9 +1188,9 @@ static void sh_eth_ring_format(struct net_device *ndev) /* RX descriptor */ rxdesc = &mdp->rx_ring[i]; /* The size of the buffer is a multiple of 32 bytes. */ - rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 32); - dma_addr = dma_map_single(&ndev->dev, skb->data, - rxdesc->buffer_length, + buf_len = ALIGN(mdp->rx_buf_sz, 32); + rxdesc->len = cpu_to_edmac(mdp, buf_len << 16); + dma_addr = dma_map_single(&ndev->dev, skb->data, buf_len, DMA_FROM_DEVICE); if (dma_mapping_error(&ndev->dev, dma_addr)) { kfree_skb(skb); @@ -1220,7 +1221,7 @@ static void sh_eth_ring_format(struct net_device *ndev) mdp->tx_skbuff[i] = NULL; txdesc = &mdp->tx_ring[i]; txdesc->status = cpu_to_edmac(mdp, TD_TFP); - txdesc->buffer_length = 0; + txdesc->len = cpu_to_edmac(mdp, 0); if (i == 0) { /* Tx descriptor address set */ sh_eth_write(ndev, mdp->tx_desc_dma, TDLAR); @@ -1429,7 +1430,8 @@ static int sh_eth_txfree(struct net_device *ndev) if (mdp->tx_skbuff[entry]) { dma_unmap_single(&ndev->dev, edmac_to_cpu(mdp, txdesc->addr), - txdesc->buffer_length, DMA_TO_DEVICE); + edmac_to_cpu(mdp, txdesc->len) >> 16, + DMA_TO_DEVICE); dev_kfree_skb_irq(mdp->tx_skbuff[entry]); mdp->tx_skbuff[entry] = NULL; free_num++; @@ -1439,7 +1441,7 @@ static int sh_eth_txfree(struct net_device *ndev) txdesc->status |= cpu_to_edmac(mdp, TD_TDLE); ndev->stats.tx_packets++; - ndev->stats.tx_bytes += txdesc->buffer_length; + ndev->stats.tx_bytes += edmac_to_cpu(mdp, txdesc->len) >> 16; } return free_num; } @@ -1458,6 +1460,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota) u32 desc_status; int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN + 32 - 1; dma_addr_t dma_addr; + u32 buf_len; boguscnt = min(boguscnt, *quota); limit = boguscnt; @@ -1466,7 +1469,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota) /* RACT bit must be checked before all the following reads */ dma_rmb(); desc_status = edmac_to_cpu(mdp, rxdesc->status); - pkt_len = rxdesc->frame_length; + pkt_len = edmac_to_cpu(mdp, rxdesc->len) & RD_RFL; if (--boguscnt < 0) break; @@ -1532,7 +1535,8 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota) entry = mdp->dirty_rx % mdp->num_rx_ring; rxdesc = &mdp->rx_ring[entry]; /* The size of the buffer is 32 byte boundary. */ - rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 32); + buf_len = ALIGN(mdp->rx_buf_sz, 32); + rxdesc->len = cpu_to_edmac(mdp, buf_len << 16); if (mdp->rx_skbuff[entry] == NULL) { skb = netdev_alloc_skb(ndev, skbuff_size); @@ -1540,8 +1544,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota) break; /* Better luck next round. */ sh_eth_set_receive_align(skb); dma_addr = dma_map_single(&ndev->dev, skb->data, - rxdesc->buffer_length, - DMA_FROM_DEVICE); + buf_len, DMA_FROM_DEVICE); if (dma_mapping_error(&ndev->dev, dma_addr)) { kfree_skb(skb); break; @@ -2407,7 +2410,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } txdesc->addr = cpu_to_edmac(mdp, dma_addr); - txdesc->buffer_length = skb->len; + txdesc->len = cpu_to_edmac(mdp, skb->len << 16); dma_wmb(); /* TACT bit must be set after all the above writes */ if (entry >= mdp->num_tx_ring - 1) diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index 26ad1cf..72fcfc9 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -283,7 +283,7 @@ enum DMAC_IM_BIT { DMAC_M_RINT1 = 0x00000001, }; -/* Receive descriptor bit */ +/* Receive descriptor 0 bits */ enum RD_STS_BIT { RD_RACT = 0x80000000, RD_RDLE = 0x40000000, RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000, @@ -298,6 +298,12 @@ enum RD_STS_BIT { #define RDFEND RD_RFP0 #define RD_RFP (RD_RFP1|RD_RFP0) +/* Receive descriptor 1 bits */ +enum RD_LEN_BIT { + RD_RFL = 0x0000ffff, /* receive frame length */ + RD_RBL = 0xffff0000, /* receive buffer length */ +}; + /* FCFTR */ enum FCFTR_BIT { FCFTR_RFF2 = 0x00040000, FCFTR_RFF1 = 0x00020000, @@ -307,7 +313,7 @@ enum FCFTR_BIT { #define DEFAULT_FIFO_F_D_RFF (FCFTR_RFF2 | FCFTR_RFF1 | FCFTR_RFF0) #define DEFAULT_FIFO_F_D_RFD (FCFTR_RFD2 | FCFTR_RFD1 | FCFTR_RFD0) -/* Transmit descriptor bit */ +/* Transmit descriptor 0 bits */ enum TD_STS_BIT { TD_TACT = 0x80000000, TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000, TD_TFP0 = 0x10000000, @@ -317,6 +323,11 @@ enum TD_STS_BIT { #define TDFEND TD_TFP0 #define TD_TFP (TD_TFP1|TD_TFP0) +/* Transmit descriptor 1 bits */ +enum TD_LEN_BIT { + TD_TBL = 0xffff0000, /* transmit buffer length */ +}; + /* RMCR */ enum RMCR_BIT { RMCR_RNC = 0x00000001, @@ -425,15 +436,9 @@ enum TSU_FWSLC_BIT { */ struct sh_eth_txdesc { u32 status; /* TD0 */ -#if defined(__LITTLE_ENDIAN) - u16 pad0; /* TD1 */ - u16 buffer_length; /* TD1 */ -#else - u16 buffer_length; /* TD1 */ - u16 pad0; /* TD1 */ -#endif + u32 len; /* TD1 */ u32 addr; /* TD2 */ - u32 pad1; /* padding data */ + u32 pad0; /* padding data */ } __aligned(2) __packed; /* The sh ether Rx buffer descriptors. @@ -441,13 +446,7 @@ struct sh_eth_txdesc { */ struct sh_eth_rxdesc { u32 status; /* RD0 */ -#if defined(__LITTLE_ENDIAN) - u16 frame_length; /* RD1 */ - u16 buffer_length; /* RD1 */ -#else - u16 buffer_length; /* RD1 */ - u16 frame_length; /* RD1 */ -#endif + u32 len; /* RD1 */ u32 addr; /* RD2 */ u32 pad0; /* padding data */ } __aligned(2) __packed; -- cgit v0.10.2 From ef9cdd0fed3875b1ae9cc85987d8143354b2d4c8 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 21 Dec 2015 09:56:01 +0100 Subject: switchdev: bridge: Pass ageing time as clock_t instead of jiffies The bridge's ageing time is offloaded to hardware when: 1) A port joins a bridge 2) The ageing time of the bridge is changed In the first case the ageing time is offloaded as jiffies, but in the second case it's offloaded as clock_t, which is what existing switchdev drivers expect to receive. Fixes: 6ac311ae8bfb ("Adding switchdev ageing notification on port bridged") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c index 5396ff08..12045de 100644 --- a/net/bridge/br_stp_if.c +++ b/net/bridge/br_stp_if.c @@ -39,7 +39,7 @@ void br_init_port(struct net_bridge_port *p) struct switchdev_attr attr = { .id = SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME, .flags = SWITCHDEV_F_SKIP_EOPNOTSUPP | SWITCHDEV_F_DEFER, - .u.ageing_time = p->br->ageing_time, + .u.ageing_time = jiffies_to_clock_t(p->br->ageing_time), }; int err; -- cgit v0.10.2 From e459dfeeb64008b2d23bdf600f03b3605dbb8152 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Mon, 21 Dec 2015 12:54:45 +0300 Subject: ipv6/addrlabel: fix ip6addrlbl_get() ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded, ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed, ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer. Fix this by inverting ip6addrlbl_hold() check. Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by: Andrey Ryabinin Reviewed-by: Cong Wang Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/addrlabel.c b/net/ipv6/addrlabel.c index 882124e..a8f6986 100644 --- a/net/ipv6/addrlabel.c +++ b/net/ipv6/addrlabel.c @@ -552,7 +552,7 @@ static int ip6addrlbl_get(struct sk_buff *in_skb, struct nlmsghdr *nlh) rcu_read_lock(); p = __ipv6_addr_label(net, addr, ipv6_addr_type(addr), ifal->ifal_index); - if (p && ip6addrlbl_hold(p)) + if (p && !ip6addrlbl_hold(p)) p = NULL; lseq = ip6addrlbl_table.seq; rcu_read_unlock(); -- cgit v0.10.2 From 5449a5ca9bc27dd51a462de7ca0b1cd861cd2bd0 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Mon, 21 Dec 2015 10:55:45 -0800 Subject: addrconf: always initialize sysctl table data When sysctl performs restrict writes, it allows to write from a middle position of a sysctl file, which requires us to initialize the table data before calling proc_dostring() for the write case. Fixes: 3d1bec99320d ("ipv6: introduce secret_stable to ipv6_devconf") Reported-by: Sasha Levin Acked-by: Hannes Frederic Sowa Tested-by: Sasha Levin Signed-off-by: Cong Wang Signed-off-by: David S. Miller diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 17f8e7e..1f21087 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -5369,13 +5369,10 @@ static int addrconf_sysctl_stable_secret(struct ctl_table *ctl, int write, goto out; } - if (!write) { - err = snprintf(str, sizeof(str), "%pI6", - &secret->secret); - if (err >= sizeof(str)) { - err = -EIO; - goto out; - } + err = snprintf(str, sizeof(str), "%pI6", &secret->secret); + if (err >= sizeof(str)) { + err = -EIO; + goto out; } err = proc_dostring(&lctl, write, buffer, lenp, ppos); -- cgit v0.10.2 From de3793796f78e293cc0873744a75588c99ed2fdd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micka=C3=ABl=20Sala=C3=BCn?= Date: Tue, 22 Dec 2015 21:44:01 +0100 Subject: um: Fix pointer cast MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a pointer cast typo introduced in v4.4-rc5 especially visible for the i386 subarchitecture where it results in a kernel crash. [ Also removed pointless cast as per Al Viro - Linus ] Fixes: 8090bfd2bb9a ("um: Fix fpstate handling") Signed-off-by: Mickaël Salaün Cc: Jeff Dike Acked-by: Richard Weinberger Signed-off-by: Linus Torvalds diff --git a/arch/x86/um/signal.c b/arch/x86/um/signal.c index e5f854c..14fcd01 100644 --- a/arch/x86/um/signal.c +++ b/arch/x86/um/signal.c @@ -470,7 +470,7 @@ long sys_sigreturn(void) struct sigcontext __user *sc = &frame->sc; int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long); - if (copy_from_user(&set.sig[0], (void *)sc->oldmask, sizeof(set.sig[0])) || + if (copy_from_user(&set.sig[0], &sc->oldmask, sizeof(set.sig[0])) || copy_from_user(&set.sig[1], frame->extramask, sig_size)) goto segfault; -- cgit v0.10.2 From 80373d37bee562060ce4d3e5272b708e8db5d1fc Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 8 Dec 2015 10:26:49 +0000 Subject: ARM: tegra: Fix suspend hang on Tegra124 Chromebooks Enabling CPUFreq support for Tegra124 Chromebooks is causing the Tegra124 to hang when resuming from suspend. When CPUFreq is enabled, the CPU clock is changed from the PLLX clock to the DFLL clock during kernel boot. When resuming from suspend the CPU clock is temporarily changed back to the PLLX clock before switching back to the DFLL. If the DFLL is operating at a much lower frequency than the PLLX when we enter suspend, and so the CPU voltage rail is at a voltage too low for the CPUs to operate at the PLLX frequency, then the device will hang. Please note that the PLLX is used in the resume sequence to switch the CPU clock from the very slow 32K clock to a faster clock during early resume to speed up the resume sequence before the DFLL is resumed. Ideally, we should fix this by setting the suspend frequency so that it matches the PLLX frequency, however, that would be a bigger change. For now simply disable CPUFreq support for Tegra124 Chromebooks to avoid the hang when resuming from suspend. Fixes: 9a0baee960a7 ("ARM: tegra: Enable CPUFreq support for Tegra124 Chromebooks") Signed-off-by: Jon Hunter Signed-off-by: Olof Johansson diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 40c23a0..ec1aa64 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -399,7 +399,7 @@ /* CPU DFLL clock */ clock@0,70110000 { - status = "okay"; + status = "disabled"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; }; -- cgit v0.10.2 From d3805611130af9b911e908af9f67a3f64f4f0914 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 22 Dec 2015 15:48:44 -0700 Subject: block: Split bios on chunk boundaries For h/w that advertise their block storage's underlying chunk size, it's a big performance win to not submit commands that cross them. This patch uses that criteria if it is provided. If it is not provided, this patch uses the max sectors as before. Signed-off-by: Keith Busch Signed-off-by: Jens Axboe diff --git a/block/blk-merge.c b/block/blk-merge.c index e01405a..e73846a 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -81,7 +81,7 @@ static struct bio *blk_bio_segment_split(struct request_queue *q, struct bio *new = NULL; bio_for_each_segment(bv, bio, iter) { - if (sectors + (bv.bv_len >> 9) > queue_max_sectors(q)) + if (sectors + (bv.bv_len >> 9) > blk_max_size_offset(q, bio->bi_iter.bi_sector)) goto split; /* -- cgit v0.10.2 From fac51590c1a077809984139e9bb9e06ed366f219 Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Mon, 21 Dec 2015 17:01:24 +0200 Subject: IB/cma: cma_match_net_dev needs to take into account port_num Previously, cma_match_net_dev called cma_protocol_roce which tried to verify that the IB device uses RoCE protocol. However, if rdma_id wasn't bound to a port, then the check would occur against the first port of the device without regard to whether that port was even of the same type as the type of port the incoming packet was received on. Fix this by passing the port of the request and only checking against the same port of the device. Reported-by: Or Gerlitz Fixes: b8cab5dab15f ('IB/cma: Accept connection without a valid netdev on RoCE') Signed-off-by: Matan Barak Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index d2d5d00..2d762a2 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1265,15 +1265,17 @@ static bool cma_protocol_roce(const struct rdma_cm_id *id) return cma_protocol_roce_dev_port(device, port_num); } -static bool cma_match_net_dev(const struct rdma_id_private *id_priv, - const struct net_device *net_dev) +static bool cma_match_net_dev(const struct rdma_cm_id *id, + const struct net_device *net_dev, + u8 port_num) { - const struct rdma_addr *addr = &id_priv->id.route.addr; + const struct rdma_addr *addr = &id->route.addr; if (!net_dev) /* This request is an AF_IB request or a RoCE request */ - return addr->src_addr.ss_family == AF_IB || - cma_protocol_roce(&id_priv->id); + return (!id->port_num || id->port_num == port_num) && + (addr->src_addr.ss_family == AF_IB || + cma_protocol_roce_dev_port(id->device, port_num)); return !addr->dev_addr.bound_dev_if || (net_eq(dev_net(net_dev), addr->dev_addr.net) && @@ -1295,13 +1297,13 @@ static struct rdma_id_private *cma_find_listener( hlist_for_each_entry(id_priv, &bind_list->owners, node) { if (cma_match_private_data(id_priv, ib_event->private_data)) { if (id_priv->id.device == cm_id->device && - cma_match_net_dev(id_priv, net_dev)) + cma_match_net_dev(&id_priv->id, net_dev, req->port)) return id_priv; list_for_each_entry(id_priv_dev, &id_priv->listen_list, listen_list) { if (id_priv_dev->id.device == cm_id->device && - cma_match_net_dev(id_priv_dev, net_dev)) + cma_match_net_dev(&id_priv_dev->id, net_dev, req->port)) return id_priv_dev; } } -- cgit v0.10.2 From df4176677fdf7ac0c5748083eb7a5b269fb1e156 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Thu, 17 Dec 2015 10:54:15 +0800 Subject: IB/mlx4: Replace kfree with kvfree in mlx4_ib_destroy_srq Commit 0ef2f05c7e02ff99c0b5b583d7dee2cd12b053f2 uses vmalloc for WR buffers when needed and uses kvfree to free the buffers. It missed changing kfree to kvfree in mlx4_ib_destroy_srq(). Reported-by: Matthew Finaly Signed-off-by: Wengang Wang Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c index 8d133c4..c394376 100644 --- a/drivers/infiniband/hw/mlx4/srq.c +++ b/drivers/infiniband/hw/mlx4/srq.c @@ -286,7 +286,7 @@ int mlx4_ib_destroy_srq(struct ib_srq *srq) mlx4_ib_db_unmap_user(to_mucontext(srq->uobject->context), &msrq->db); ib_umem_release(msrq->umem); } else { - kfree(msrq->wrid); + kvfree(msrq->wrid); mlx4_buf_free(dev->dev, msrq->msrq.max << msrq->msrq.wqe_shift, &msrq->buf); mlx4_db_free(dev->dev, &msrq->db); -- cgit v0.10.2 From 9bcfd78ac0d19ef4c14b8b37eded26e5b3299e41 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Fri, 20 Nov 2015 15:54:06 -0800 Subject: sparc: Hook up userfaultfd system call After hooking up system call, userfaultfd selftest was successful for both 32 and 64 bit version of test. Signed-off-by: Mike Kravetz Signed-off-by: David S. Miller diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h index efe9479..f31a124 100644 --- a/arch/sparc/include/uapi/asm/unistd.h +++ b/arch/sparc/include/uapi/asm/unistd.h @@ -417,8 +417,9 @@ #define __NR_bpf 349 #define __NR_execveat 350 #define __NR_membarrier 351 +#define __NR_userfaultfd 352 -#define NR_syscalls 352 +#define NR_syscalls 353 /* Bitmask values returned from kern_features system call. */ #define KERN_FEATURE_MIXED_MODE_STACK 0x00000001 diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index cc23b62..78e8029 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -87,4 +87,4 @@ sys_call_table: /*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr /*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .long sys_execveat, sys_membarrier +/*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index f229468..2549c2c 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -88,7 +88,7 @@ sys_call_table32: .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys32_execveat, sys_membarrier +/*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd #endif /* CONFIG_COMPAT */ @@ -168,4 +168,4 @@ sys_call_table: .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys64_execveat, sys_membarrier +/*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd -- cgit v0.10.2 From a7def561c2ad8572c5d016ac96949e5e9999965f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 15 Dec 2015 11:16:44 +0000 Subject: cpufreq: scpi-cpufreq: signedness bug in scpi_get_dvfs_info() The "domain" variable needs to be signed for the error handling to work. Fixes: 8def31034d03 (cpufreq: arm_big_little: add SCPI interface driver) Signed-off-by: Dan Carpenter Acked-by: Viresh Kumar Acked-by: Sudeep Holla Signed-off-by: Rafael J. Wysocki diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index 2c3b16f..de5e89b 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -31,7 +31,7 @@ static struct scpi_ops *scpi_ops; static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev) { - u8 domain = topology_physical_package_id(cpu_dev->id); + int domain = topology_physical_package_id(cpu_dev->id); if (domain < 0) return ERR_PTR(-EINVAL); -- cgit v0.10.2 From c1a9a291cee0890eb0f435243f3fb84fefb04348 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Wed, 23 Dec 2015 22:44:37 +0100 Subject: ipv6: honor ifindex in case we receive ll addresses in router advertisements Marc Haber reported we don't honor interface indexes when we receive link local router addresses in router advertisements. Luckily the non-strict version of ipv6_chk_addr already does the correct job here, so we can simply use it to lighten the checks and use those addresses by default without any configuration change. Link: Reported-by: Marc Haber Cc: Marc Haber Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index d6161e1..84afb9a 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1183,7 +1183,7 @@ static void ndisc_router_discovery(struct sk_buff *skb) */ if (!in6_dev->cnf.accept_ra_from_local && ipv6_chk_addr(dev_net(in6_dev->dev), &ipv6_hdr(skb)->saddr, - NULL, 0)) { + in6_dev->dev, 0)) { ND_PRINTK(2, info, "RA from local address detected on dev: %s: default router ignored\n", skb->dev->name); @@ -1337,7 +1337,7 @@ skip_linkparms: #ifdef CONFIG_IPV6_ROUTE_INFO if (!in6_dev->cnf.accept_ra_from_local && ipv6_chk_addr(dev_net(in6_dev->dev), &ipv6_hdr(skb)->saddr, - NULL, 0)) { + in6_dev->dev, 0)) { ND_PRINTK(2, info, "RA from local address detected on dev: %s: router info ignored.\n", skb->dev->name); -- cgit v0.10.2 From 184fc8b5ee601cd83dbbdf3e6cfec5f5b8d3b41a Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 23 Dec 2015 16:54:27 +0100 Subject: geneve: initialize needed_headroom Currently the needed_headroom field for the geneve device is left to the default value. This patch set it to space required for basic geneve encapsulation, so that we can avoid the skb head re-allocation on xmit. This give a 6% speedup for unsegment traffic on geneve tunnel. v1 -> v2: - add ETH_HLEN for the lower device to the needed headroom Signed-off-by: Paolo Abeni Acked-by: Hannes Frederic Sowa Acked-by: John W. Linville Signed-off-by: David S. Miller diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index c2b79f5..58efdec 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1155,7 +1155,7 @@ static int geneve_configure(struct net *net, struct net_device *dev, struct geneve_net *gn = net_generic(net, geneve_net_id); struct geneve_dev *t, *geneve = netdev_priv(dev); bool tun_collect_md, tun_on_same_port; - int err; + int err, encap_len; if (!remote) return -EINVAL; @@ -1187,6 +1187,14 @@ static int geneve_configure(struct net *net, struct net_device *dev, if (t) return -EBUSY; + /* make enough headroom for basic scenario */ + encap_len = GENEVE_BASE_HLEN + ETH_HLEN; + if (remote->sa.sa_family == AF_INET) + encap_len += sizeof(struct iphdr); + else + encap_len += sizeof(struct ipv6hdr); + dev->needed_headroom = encap_len + ETH_HLEN; + if (metadata) { if (tun_on_same_port) return -EPERM; -- cgit v0.10.2 From 1dfddff5fcd869fcab0c52fafae099dfa435a935 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 23 Dec 2015 13:42:43 +0100 Subject: net: cdc_ncm: avoid changing RX/TX buffers on MTU changes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit NCM buffer sizes are negotiated with the device independently of the network device MTU. The RX buffers are allocated by the usbnet framework based on the rx_urb_size value set by cdc_ncm. A single RX buffer can hold a number of MTU sized packets. The default usbnet change_mtu ndo only modifies rx_urb_size if it is equal to hard_mtu. And the cdc_ncm driver will set rx_urb_size and hard_mtu independently of each other, based on dwNtbInMaxSize and dwNtbOutMaxSize respectively. It was therefore assumed that usbnet_change_mtu() would never touch rx_urb_size. This failed to consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens to be equal. Fix by implementing an NCM specific change_mtu ndo, modifying the netdev MTU without touching the buffer size settings. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 8973abd..bdd83d9 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -100,7 +100,7 @@ static const struct net_device_ops cdc_mbim_netdev_ops = { .ndo_stop = usbnet_stop, .ndo_start_xmit = usbnet_start_xmit, .ndo_tx_timeout = usbnet_tx_timeout, - .ndo_change_mtu = usbnet_change_mtu, + .ndo_change_mtu = cdc_ncm_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_vlan_rx_add_vid = cdc_mbim_rx_add_vid, diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 3694052..e8a1144 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -689,6 +690,33 @@ static void cdc_ncm_free(struct cdc_ncm_ctx *ctx) kfree(ctx); } +/* we need to override the usbnet change_mtu ndo for two reasons: + * - respect the negotiated maximum datagram size + * - avoid unwanted changes to rx and tx buffers + */ +int cdc_ncm_change_mtu(struct net_device *net, int new_mtu) +{ + struct usbnet *dev = netdev_priv(net); + struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; + int maxmtu = ctx->max_datagram_size - cdc_ncm_eth_hlen(dev); + + if (new_mtu <= 0 || new_mtu > maxmtu) + return -EINVAL; + net->mtu = new_mtu; + return 0; +} +EXPORT_SYMBOL_GPL(cdc_ncm_change_mtu); + +static const struct net_device_ops cdc_ncm_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = cdc_ncm_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags) { struct cdc_ncm_ctx *ctx; @@ -823,6 +851,9 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_ /* add our sysfs attrs */ dev->net->sysfs_groups[0] = &cdc_ncm_sysfs_attr_group; + /* must handle MTU changes */ + dev->net->netdev_ops = &cdc_ncm_netdev_ops; + return 0; error2: diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h index 1f6526c..3a375d0 100644 --- a/include/linux/usb/cdc_ncm.h +++ b/include/linux/usb/cdc_ncm.h @@ -138,6 +138,7 @@ struct cdc_ncm_ctx { }; u8 cdc_ncm_select_altsetting(struct usb_interface *intf); +int cdc_ncm_change_mtu(struct net_device *net, int new_mtu); int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags); void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf); struct sk_buff *cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign); -- cgit v0.10.2 From 3358a5c0c1578fa215f90a0e750579cd6258ddd9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Dec 2015 12:21:22 +0300 Subject: qlcnic: fix a loop exit condition better In the original code, if we succeeded on the last iteration through the loop then we still returned failure. Fixes: 389e4e04ad2d ('qlcnic: fix a timeout loop') Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c index b1a452f..3490675 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c @@ -252,7 +252,7 @@ int qlcnic_83xx_check_vnic_state(struct qlcnic_adapter *adapter) state = QLCRDX(ahw, QLC_83XX_VNIC_STATE); } - if (!idc->vnic_wait_limit) { + if (state != QLCNIC_DEV_NPAR_OPER) { dev_err(&adapter->pdev->dev, "vNIC mode not operational, state check timed out.\n"); return -EIO; -- cgit v0.10.2 From 01fd3c2744540ae7554bf098a9615a8310c6fc13 Mon Sep 17 00:00:00 2001 From: Aya Mahfouz Date: Tue, 15 Dec 2015 01:37:57 +0200 Subject: tty: serial: constify sunhv_ops structs Constifies sunhv_ops structures in tty's serial driver since they are not modified after their initialization. Detected and found using Coccinelle. Suggested-by: Julia Lawall Signed-off-by: Aya Mahfouz Signed-off-by: David S. Miller diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index 0640318..f224e8a 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -168,17 +168,17 @@ struct sunhv_ops { int (*receive_chars)(struct uart_port *port); }; -static struct sunhv_ops bychar_ops = { +static const struct sunhv_ops bychar_ops = { .transmit_chars = transmit_chars_putchar, .receive_chars = receive_chars_getchar, }; -static struct sunhv_ops bywrite_ops = { +static const struct sunhv_ops bywrite_ops = { .transmit_chars = transmit_chars_write, .receive_chars = receive_chars_read, }; -static struct sunhv_ops *sunhv_ops = &bychar_ops; +static const struct sunhv_ops *sunhv_ops = &bychar_ops; static struct tty_port *receive_chars(struct uart_port *port) { -- cgit v0.10.2 From 82924e542f20e645bc7de86e2889fe3fb0858566 Mon Sep 17 00:00:00 2001 From: Khalid Aziz Date: Thu, 17 Dec 2015 10:33:50 -0700 Subject: sparc64: Add ADI capability to cpu capabilities Add ADI (Application Data Integrity) capability to cpu capabilities list. ADI capability allows virtual addresses to be encoded with a tag in bits 63-60. This tag serves as an access control key for the regions of virtual address with ADI enabled and a key set on them. Hypervisor encodes this capability as "adp" in "hwcap-list" property in machine description. Signed-off-by: Khalid Aziz Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index 370ca1e..9331083 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -95,6 +95,7 @@ * really available. So we simply advertise only "crypto" support. */ #define HWCAP_SPARC_CRYPTO 0x04000000 /* CRYPTO insns available */ +#define HWCAP_SPARC_ADI 0x08000000 /* ADI available */ #define CORE_DUMP_USE_REGSET diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index f7b2617..f3185e2 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -380,7 +380,8 @@ static const char *hwcaps[] = { */ "mul32", "div32", "fsmuld", "v8plus", "popc", "vis", "vis2", "ASIBlkInit", "fmaf", "vis3", "hpc", "random", "trans", "fjfmau", - "ima", "cspare", "pause", "cbcond", + "ima", "cspare", "pause", "cbcond", NULL /*reserved for crypto */, + "adp", }; static const char *crypto_hwcaps[] = { @@ -396,7 +397,7 @@ void cpucap_info(struct seq_file *m) seq_puts(m, "cpucaps\t\t: "); for (i = 0; i < ARRAY_SIZE(hwcaps); i++) { unsigned long bit = 1UL << i; - if (caps & bit) { + if (hwcaps[i] && (caps & bit)) { seq_printf(m, "%s%s", printed ? "," : "", hwcaps[i]); printed++; @@ -450,7 +451,7 @@ static void __init report_hwcaps(unsigned long caps) for (i = 0; i < ARRAY_SIZE(hwcaps); i++) { unsigned long bit = 1UL << i; - if (caps & bit) + if (hwcaps[i] && (caps & bit)) report_one_hwcap(&printed, hwcaps[i]); } if (caps & HWCAP_SPARC_CRYPTO) @@ -485,7 +486,7 @@ static unsigned long __init mdesc_cpu_hwcap_list(void) for (i = 0; i < ARRAY_SIZE(hwcaps); i++) { unsigned long bit = 1UL << i; - if (!strcmp(prop, hwcaps[i])) { + if (hwcaps[i] && !strcmp(prop, hwcaps[i])) { caps |= bit; break; } -- cgit v0.10.2 From 1ca04a4ce0d5131471c5a1fac76899dc2d9d3f36 Mon Sep 17 00:00:00 2001 From: Rob Gardner Date: Mon, 21 Dec 2015 21:48:03 -0700 Subject: sparc64: Don't set %pil in rtrap_nmi too early Commit 28a1f53 delays setting %pil to avoid potential hardirq stack overflow in the common rtrap_irq path. Setting %pil also needs to be delayed in the rtrap_nmi path for the same reason. Signed-off-by: Rob Gardner Signed-off-by: Dave Aldridge Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S index 39f0c66..d08bdaf 100644 --- a/arch/sparc/kernel/rtrap_64.S +++ b/arch/sparc/kernel/rtrap_64.S @@ -73,7 +73,13 @@ rtrap_nmi: ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 andn %l1, %l4, %l1 srl %l4, 20, %l4 ba,pt %xcc, rtrap_no_irq_enable - wrpr %l4, %pil + nop + /* Do not actually set the %pil here. We will do that + * below after we clear PSTATE_IE in the %pstate register. + * If we re-enable interrupts here, we can recurse down + * the hardirq stack potentially endlessly, causing a + * stack overflow. + */ .align 64 .globl rtrap_irq, rtrap, irqsz_patchme, rtrap_xcall -- cgit v0.10.2 From 3f74306ac84cf7f2da2fdc87014fc455f5e67bad Mon Sep 17 00:00:00 2001 From: Rob Gardner Date: Tue, 22 Dec 2015 21:16:06 -0700 Subject: sparc64: Ensure perf can access user stacks When an interrupt (such as a perf counter interrupt) is delivered while executing in user space, the trap entry code puts ASI_AIUS in %asi so that copy_from_user() and copy_to_user() will access the correct memory. But if a perf counter interrupt is delivered while the cpu is already executing in kernel space, then the trap entry code will put ASI_P in %asi, and this will prevent copy_from_user() from reading any useful stack data in either of the perf_callchain_user_X functions, and thus no user callgraph data will be collected for this sample period. An additional problem is that a fault is guaranteed to occur, and though it will be silently covered up, it wastes time and could perturb state. In perf_callchain_user(), we ensure that %asi contains ASI_AIUS because we know for a fact that the subsequent calls to copy_from_user() are intended to read the user's stack. [ Use get_fs()/set_fs() -DaveM ] Signed-off-by: Rob Gardner Signed-off-by: Dave Aldridge Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 3091267..b1144d6 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1828,11 +1828,16 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry, void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { + mm_segment_t old_fs; + perf_callchain_store(entry, regs->tpc); if (!current->mm) return; + old_fs = get_fs(); + set_fs(USER_DS); + flushw_user(); pagefault_disable(); @@ -1843,4 +1848,6 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) perf_callchain_user_64(entry, regs); pagefault_enable(); + + set_fs(old_fs); } -- cgit v0.10.2 From 833526941f5945cf0b22a595bb8f3525b512f654 Mon Sep 17 00:00:00 2001 From: Rob Gardner Date: Tue, 22 Dec 2015 21:16:07 -0700 Subject: sparc64: Perf should save/restore fault info There have been several reports of random processes being killed with a bus error or segfault during userspace stack walking in perf. One of the root causes of this problem is an asynchronous modification to thread_info fault_address and fault_code, which stems from a perf counter interrupt arriving during kernel processing of a "benign" fault, such as a TSB miss. Since perf_callchain_user() invokes copy_from_user() to read user stacks, a fault is not only possible, but probable. Validity checks on the stack address merely cover up the problem and reduce its frequency. The solution here is to save and restore fault_address and fault_code in perf_callchain_user() so that the benign fault handler is not disturbed by a perf interrupt. Signed-off-by: Rob Gardner Signed-off-by: Dave Aldridge Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index b1144d6..6596f66 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1828,6 +1828,8 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry, void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { + u64 saved_fault_address = current_thread_info()->fault_address; + u8 saved_fault_code = get_thread_fault_code(); mm_segment_t old_fs; perf_callchain_store(entry, regs->tpc); @@ -1850,4 +1852,6 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) pagefault_enable(); set_fs(old_fs); + set_thread_fault_code(saved_fault_code); + current_thread_info()->fault_address = saved_fault_address; } -- cgit v0.10.2 From a7c5724b5c17775ca8ea2fd9906d8a7e37337cce Mon Sep 17 00:00:00 2001 From: Rob Gardner Date: Tue, 22 Dec 2015 23:24:49 -0700 Subject: sparc64: fix FP corruption in user copy functions Short story: Exception handlers used by some copy_to_user() and copy_from_user() functions do not diligently clean up floating point register usage, and this can result in a user process seeing invalid values in floating point registers. This sometimes makes the process fail. Long story: Several cpu-specific (NG4, NG2, U1, U3) memcpy functions use floating point registers and VIS alignaddr/faligndata to accelerate data copying when source and dest addresses don't align well. Linux uses a lazy scheme for saving floating point registers; It is not done upon entering the kernel since it's a very expensive operation. Rather, it is done only when needed. If the kernel ends up not using FP regs during the course of some trap or system call, then it can return to user space without saving or restoring them. The various memcpy functions begin their FP code with VISEntry (or a variation thereof), which saves the FP regs. They conclude their FP code with VISExit (or a variation) which essentially marks the FP regs "clean", ie, they contain no unsaved values. fprs.FPRS_FEF is turned off so that a lazy restore will be triggered when/if the user process accesses floating point regs again. The bug is that the user copy variants of memcpy, copy_from_user() and copy_to_user(), employ an exception handling mechanism to detect faults when accessing user space addresses, and when this handler is invoked, an immediate return from the function is forced, and VISExit is not executed, thus leaving the fprs register in an indeterminate state, but often with fprs.FPRS_FEF set and one or more dirty bits. This results in a return to user space with invalid values in the FP regs, and since fprs.FPRS_FEF is on, no lazy restore occurs. This bug affects copy_to_user() and copy_from_user() for NG4, NG2, U3, and U1. All are fixed by using a new exception handler for those loads and stores that are done during the time between VISEnter and VISExit. n.b. In NG4memcpy, the problematic code can be triggered by a copy size greater than 128 bytes and an unaligned source address. This bug is known to be the cause of random user process memory corruptions while perf is running with the callgraph option (ie, perf record -g). This occurs because perf uses copy_from_user() to read user stacks, and may fault when it follows a stack frame pointer off to an invalid page. Validation checks on the stack address just obscure the underlying problem. Signed-off-by: Rob Gardner Signed-off-by: Dave Aldridge Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 3d61fca..f2d30ca 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -946,6 +946,12 @@ ENTRY(__retl_one) mov 1, %o0 ENDPROC(__retl_one) +ENTRY(__retl_one_fp) + VISExitHalf + retl + mov 1, %o0 +ENDPROC(__retl_one_fp) + ENTRY(__ret_one_asi) wr %g0, ASI_AIUS, %asi ret @@ -958,6 +964,13 @@ ENTRY(__retl_one_asi) mov 1, %o0 ENDPROC(__retl_one_asi) +ENTRY(__retl_one_asi_fp) + wr %g0, ASI_AIUS, %asi + VISExitHalf + retl + mov 1, %o0 +ENDPROC(__retl_one_asi_fp) + ENTRY(__retl_o1) retl mov %o1, %o0 diff --git a/arch/sparc/lib/NG2copy_from_user.S b/arch/sparc/lib/NG2copy_from_user.S index 119ccb9..d5242b8 100644 --- a/arch/sparc/lib/NG2copy_from_user.S +++ b/arch/sparc/lib/NG2copy_from_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_LD_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_asi_fp;\ + .text; \ + .align 4; + #ifndef ASI_AIUS #define ASI_AIUS 0x11 #endif diff --git a/arch/sparc/lib/NG2copy_to_user.S b/arch/sparc/lib/NG2copy_to_user.S index 7fe1cce..4e962d9 100644 --- a/arch/sparc/lib/NG2copy_to_user.S +++ b/arch/sparc/lib/NG2copy_to_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_ST_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_asi_fp;\ + .text; \ + .align 4; + #ifndef ASI_AIUS #define ASI_AIUS 0x11 #endif diff --git a/arch/sparc/lib/NG2memcpy.S b/arch/sparc/lib/NG2memcpy.S index 30eee6e..d5f585d 100644 --- a/arch/sparc/lib/NG2memcpy.S +++ b/arch/sparc/lib/NG2memcpy.S @@ -34,10 +34,16 @@ #ifndef EX_LD #define EX_LD(x) x #endif +#ifndef EX_LD_FP +#define EX_LD_FP(x) x +#endif #ifndef EX_ST #define EX_ST(x) x #endif +#ifndef EX_ST_FP +#define EX_ST_FP(x) x +#endif #ifndef EX_RETVAL #define EX_RETVAL(x) x @@ -134,40 +140,40 @@ fsrc2 %x6, %f12; \ fsrc2 %x7, %f14; #define FREG_LOAD_1(base, x0) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)) + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)) #define FREG_LOAD_2(base, x0, x1) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); #define FREG_LOAD_3(base, x0, x1, x2) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); #define FREG_LOAD_4(base, x0, x1, x2, x3) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD(LOAD(ldd, base + 0x18, %x3)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); #define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD(LOAD(ldd, base + 0x20, %x4)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); #define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD(LOAD(ldd, base + 0x20, %x4)); \ - EX_LD(LOAD(ldd, base + 0x28, %x5)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \ + EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); #define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD(LOAD(ldd, base + 0x20, %x4)); \ - EX_LD(LOAD(ldd, base + 0x28, %x5)); \ - EX_LD(LOAD(ldd, base + 0x30, %x6)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \ + EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); \ + EX_LD_FP(LOAD(ldd, base + 0x30, %x6)); .register %g2,#scratch .register %g3,#scratch @@ -275,11 +281,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ nop /* fall through for 0 < low bits < 8 */ 110: sub %o4, 64, %g2 - EX_LD(LOAD_BLK(%g2, %f0)) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) + EX_LD_FP(LOAD_BLK(%g2, %f0)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -290,10 +296,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 120: sub %o4, 56, %g2 FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -304,10 +310,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 130: sub %o4, 48, %g2 FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_6(f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -318,10 +324,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 140: sub %o4, 40, %g2 FREG_LOAD_5(%g2, f0, f2, f4, f6, f8) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_5(f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -332,10 +338,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 150: sub %o4, 32, %g2 FREG_LOAD_4(%g2, f0, f2, f4, f6) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_4(f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -346,10 +352,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 160: sub %o4, 24, %g2 FREG_LOAD_3(%g2, f0, f2, f4) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_3(f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -360,10 +366,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 170: sub %o4, 16, %g2 FREG_LOAD_2(%g2, f0, f2) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_2(f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -374,10 +380,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 180: sub %o4, 8, %g2 FREG_LOAD_1(%g2, f0) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_1(f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -387,10 +393,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ nop 190: -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) subcc %g1, 64, %g1 - EX_LD(LOAD_BLK(%o4, %f0)) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f0)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) add %o4, 64, %o4 bne,pt %xcc, 1b LOAD(prefetch, %o4 + 64, #one_read) diff --git a/arch/sparc/lib/NG4copy_from_user.S b/arch/sparc/lib/NG4copy_from_user.S index fd9f903..2e8ee7a 100644 --- a/arch/sparc/lib/NG4copy_from_user.S +++ b/arch/sparc/lib/NG4copy_from_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_LD_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_asi_fp;\ + .text; \ + .align 4; + #ifndef ASI_AIUS #define ASI_AIUS 0x11 #endif diff --git a/arch/sparc/lib/NG4copy_to_user.S b/arch/sparc/lib/NG4copy_to_user.S index 9744c454..be0bf45 100644 --- a/arch/sparc/lib/NG4copy_to_user.S +++ b/arch/sparc/lib/NG4copy_to_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_ST_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_asi_fp;\ + .text; \ + .align 4; + #ifndef ASI_AIUS #define ASI_AIUS 0x11 #endif diff --git a/arch/sparc/lib/NG4memcpy.S b/arch/sparc/lib/NG4memcpy.S index 83aeeb1..8e13ee1 100644 --- a/arch/sparc/lib/NG4memcpy.S +++ b/arch/sparc/lib/NG4memcpy.S @@ -48,10 +48,16 @@ #ifndef EX_LD #define EX_LD(x) x #endif +#ifndef EX_LD_FP +#define EX_LD_FP(x) x +#endif #ifndef EX_ST #define EX_ST(x) x #endif +#ifndef EX_ST_FP +#define EX_ST_FP(x) x +#endif #ifndef EX_RETVAL #define EX_RETVAL(x) x @@ -210,17 +216,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %o2, %o4, %o2 alignaddr %o1, %g0, %g1 add %o1, %o4, %o1 - EX_LD(LOAD(ldd, %g1 + 0x00, %f0)) -1: EX_LD(LOAD(ldd, %g1 + 0x08, %f2)) + EX_LD_FP(LOAD(ldd, %g1 + 0x00, %f0)) +1: EX_LD_FP(LOAD(ldd, %g1 + 0x08, %f2)) subcc %o4, 0x40, %o4 - EX_LD(LOAD(ldd, %g1 + 0x10, %f4)) - EX_LD(LOAD(ldd, %g1 + 0x18, %f6)) - EX_LD(LOAD(ldd, %g1 + 0x20, %f8)) - EX_LD(LOAD(ldd, %g1 + 0x28, %f10)) - EX_LD(LOAD(ldd, %g1 + 0x30, %f12)) - EX_LD(LOAD(ldd, %g1 + 0x38, %f14)) + EX_LD_FP(LOAD(ldd, %g1 + 0x10, %f4)) + EX_LD_FP(LOAD(ldd, %g1 + 0x18, %f6)) + EX_LD_FP(LOAD(ldd, %g1 + 0x20, %f8)) + EX_LD_FP(LOAD(ldd, %g1 + 0x28, %f10)) + EX_LD_FP(LOAD(ldd, %g1 + 0x30, %f12)) + EX_LD_FP(LOAD(ldd, %g1 + 0x38, %f14)) faligndata %f0, %f2, %f16 - EX_LD(LOAD(ldd, %g1 + 0x40, %f0)) + EX_LD_FP(LOAD(ldd, %g1 + 0x40, %f0)) faligndata %f2, %f4, %f18 add %g1, 0x40, %g1 faligndata %f4, %f6, %f20 @@ -229,14 +235,14 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ faligndata %f10, %f12, %f26 faligndata %f12, %f14, %f28 faligndata %f14, %f0, %f30 - EX_ST(STORE(std, %f16, %o0 + 0x00)) - EX_ST(STORE(std, %f18, %o0 + 0x08)) - EX_ST(STORE(std, %f20, %o0 + 0x10)) - EX_ST(STORE(std, %f22, %o0 + 0x18)) - EX_ST(STORE(std, %f24, %o0 + 0x20)) - EX_ST(STORE(std, %f26, %o0 + 0x28)) - EX_ST(STORE(std, %f28, %o0 + 0x30)) - EX_ST(STORE(std, %f30, %o0 + 0x38)) + EX_ST_FP(STORE(std, %f16, %o0 + 0x00)) + EX_ST_FP(STORE(std, %f18, %o0 + 0x08)) + EX_ST_FP(STORE(std, %f20, %o0 + 0x10)) + EX_ST_FP(STORE(std, %f22, %o0 + 0x18)) + EX_ST_FP(STORE(std, %f24, %o0 + 0x20)) + EX_ST_FP(STORE(std, %f26, %o0 + 0x28)) + EX_ST_FP(STORE(std, %f28, %o0 + 0x30)) + EX_ST_FP(STORE(std, %f30, %o0 + 0x38)) add %o0, 0x40, %o0 bne,pt %icc, 1b LOAD(prefetch, %g1 + 0x200, #n_reads_strong) diff --git a/arch/sparc/lib/U1copy_from_user.S b/arch/sparc/lib/U1copy_from_user.S index a6ae2ea..ecc5692 100644 --- a/arch/sparc/lib/U1copy_from_user.S +++ b/arch/sparc/lib/U1copy_from_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_LD_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_fp;\ + .text; \ + .align 4; + #define FUNC_NAME ___copy_from_user #define LOAD(type,addr,dest) type##a [addr] %asi, dest #define LOAD_BLK(addr,dest) ldda [addr] ASI_BLK_AIUS, dest diff --git a/arch/sparc/lib/U1copy_to_user.S b/arch/sparc/lib/U1copy_to_user.S index f4b970e..9eea392 100644 --- a/arch/sparc/lib/U1copy_to_user.S +++ b/arch/sparc/lib/U1copy_to_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_ST_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_fp;\ + .text; \ + .align 4; + #define FUNC_NAME ___copy_to_user #define STORE(type,src,addr) type##a src, [addr] ASI_AIUS #define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_AIUS diff --git a/arch/sparc/lib/U1memcpy.S b/arch/sparc/lib/U1memcpy.S index b67142b..3e6209e 100644 --- a/arch/sparc/lib/U1memcpy.S +++ b/arch/sparc/lib/U1memcpy.S @@ -25,10 +25,16 @@ #ifndef EX_LD #define EX_LD(x) x #endif +#ifndef EX_LD_FP +#define EX_LD_FP(x) x +#endif #ifndef EX_ST #define EX_ST(x) x #endif +#ifndef EX_ST_FP +#define EX_ST_FP(x) x +#endif #ifndef EX_RETVAL #define EX_RETVAL(x) x @@ -73,8 +79,8 @@ faligndata %f8, %f9, %f62; #define MAIN_LOOP_CHUNK(src, dest, fdest, fsrc, len, jmptgt) \ - EX_LD(LOAD_BLK(%src, %fdest)); \ - EX_ST(STORE_BLK(%fsrc, %dest)); \ + EX_LD_FP(LOAD_BLK(%src, %fdest)); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ add %src, 0x40, %src; \ subcc %len, 0x40, %len; \ be,pn %xcc, jmptgt; \ @@ -89,12 +95,12 @@ #define DO_SYNC membar #Sync; #define STORE_SYNC(dest, fsrc) \ - EX_ST(STORE_BLK(%fsrc, %dest)); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ add %dest, 0x40, %dest; \ DO_SYNC #define STORE_JUMP(dest, fsrc, target) \ - EX_ST(STORE_BLK(%fsrc, %dest)); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ add %dest, 0x40, %dest; \ ba,pt %xcc, target; \ nop; @@ -103,7 +109,7 @@ subcc %left, 8, %left;\ bl,pn %xcc, 95f; \ faligndata %f0, %f1, %f48; \ - EX_ST(STORE(std, %f48, %dest)); \ + EX_ST_FP(STORE(std, %f48, %dest)); \ add %dest, 8, %dest; #define UNEVEN_VISCHUNK_LAST(dest, f0, f1, left) \ @@ -160,8 +166,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ and %g2, 0x38, %g2 1: subcc %g1, 0x1, %g1 - EX_LD(LOAD(ldub, %o1 + 0x00, %o3)) - EX_ST(STORE(stb, %o3, %o1 + %GLOBAL_SPARE)) + EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3)) + EX_ST_FP(STORE(stb, %o3, %o1 + %GLOBAL_SPARE)) bgu,pt %XCC, 1b add %o1, 0x1, %o1 @@ -172,20 +178,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ be,pt %icc, 3f alignaddr %o1, %g0, %o1 - EX_LD(LOAD(ldd, %o1, %f4)) -1: EX_LD(LOAD(ldd, %o1 + 0x8, %f6)) + EX_LD_FP(LOAD(ldd, %o1, %f4)) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f4, %f6, %f0 - EX_ST(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0)) be,pn %icc, 3f add %o0, 0x8, %o0 - EX_LD(LOAD(ldd, %o1 + 0x8, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f6, %f4, %f0 - EX_ST(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0)) bne,pt %icc, 1b add %o0, 0x8, %o0 @@ -208,13 +214,13 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ add %g1, %GLOBAL_SPARE, %g1 subcc %o2, %g3, %o2 - EX_LD(LOAD_BLK(%o1, %f0)) + EX_LD_FP(LOAD_BLK(%o1, %f0)) add %o1, 0x40, %o1 add %g1, %g3, %g1 - EX_LD(LOAD_BLK(%o1, %f16)) + EX_LD_FP(LOAD_BLK(%o1, %f16)) add %o1, 0x40, %o1 sub %GLOBAL_SPARE, 0x80, %GLOBAL_SPARE - EX_LD(LOAD_BLK(%o1, %f32)) + EX_LD_FP(LOAD_BLK(%o1, %f32)) add %o1, 0x40, %o1 /* There are 8 instances of the unrolled loop, @@ -426,28 +432,28 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 62: FINISH_VISCHUNK(o0, f44, f46, g3) 63: UNEVEN_VISCHUNK_LAST(o0, f46, f0, g3) -93: EX_LD(LOAD(ldd, %o1, %f2)) +93: EX_LD_FP(LOAD(ldd, %o1, %f2)) add %o1, 8, %o1 subcc %g3, 8, %g3 faligndata %f0, %f2, %f8 - EX_ST(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0)) bl,pn %xcc, 95f add %o0, 8, %o0 - EX_LD(LOAD(ldd, %o1, %f0)) + EX_LD_FP(LOAD(ldd, %o1, %f0)) add %o1, 8, %o1 subcc %g3, 8, %g3 faligndata %f2, %f0, %f8 - EX_ST(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0)) bge,pt %xcc, 93b add %o0, 8, %o0 95: brz,pt %o2, 2f mov %g1, %o1 -1: EX_LD(LOAD(ldub, %o1, %o3)) +1: EX_LD_FP(LOAD(ldub, %o1, %o3)) add %o1, 1, %o1 subcc %o2, 1, %o2 - EX_ST(STORE(stb, %o3, %o0)) + EX_ST_FP(STORE(stb, %o3, %o0)) bne,pt %xcc, 1b add %o0, 1, %o0 diff --git a/arch/sparc/lib/U3copy_from_user.S b/arch/sparc/lib/U3copy_from_user.S index b1acd13..88ad73d 100644 --- a/arch/sparc/lib/U3copy_from_user.S +++ b/arch/sparc/lib/U3copy_from_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_LD_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_fp;\ + .text; \ + .align 4; + #define FUNC_NAME U3copy_from_user #define LOAD(type,addr,dest) type##a [addr] %asi, dest #define EX_RETVAL(x) 0 diff --git a/arch/sparc/lib/U3copy_to_user.S b/arch/sparc/lib/U3copy_to_user.S index ef1e493..845139d 100644 --- a/arch/sparc/lib/U3copy_to_user.S +++ b/arch/sparc/lib/U3copy_to_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_ST_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_fp;\ + .text; \ + .align 4; + #define FUNC_NAME U3copy_to_user #define STORE(type,src,addr) type##a src, [addr] ASI_AIUS #define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_AIUS diff --git a/arch/sparc/lib/U3memcpy.S b/arch/sparc/lib/U3memcpy.S index 7cae9cc..491ee69 100644 --- a/arch/sparc/lib/U3memcpy.S +++ b/arch/sparc/lib/U3memcpy.S @@ -24,10 +24,16 @@ #ifndef EX_LD #define EX_LD(x) x #endif +#ifndef EX_LD_FP +#define EX_LD_FP(x) x +#endif #ifndef EX_ST #define EX_ST(x) x #endif +#ifndef EX_ST_FP +#define EX_ST_FP(x) x +#endif #ifndef EX_RETVAL #define EX_RETVAL(x) x @@ -120,8 +126,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ and %g2, 0x38, %g2 1: subcc %g1, 0x1, %g1 - EX_LD(LOAD(ldub, %o1 + 0x00, %o3)) - EX_ST(STORE(stb, %o3, %o1 + GLOBAL_SPARE)) + EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3)) + EX_ST_FP(STORE(stb, %o3, %o1 + GLOBAL_SPARE)) bgu,pt %XCC, 1b add %o1, 0x1, %o1 @@ -132,20 +138,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ be,pt %icc, 3f alignaddr %o1, %g0, %o1 - EX_LD(LOAD(ldd, %o1, %f4)) -1: EX_LD(LOAD(ldd, %o1 + 0x8, %f6)) + EX_LD_FP(LOAD(ldd, %o1, %f4)) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f4, %f6, %f0 - EX_ST(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0)) be,pn %icc, 3f add %o0, 0x8, %o0 - EX_LD(LOAD(ldd, %o1 + 0x8, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f6, %f4, %f2 - EX_ST(STORE(std, %f2, %o0)) + EX_ST_FP(STORE(std, %f2, %o0)) bne,pt %icc, 1b add %o0, 0x8, %o0 @@ -155,25 +161,25 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ LOAD(prefetch, %o1 + 0x080, #one_read) LOAD(prefetch, %o1 + 0x0c0, #one_read) LOAD(prefetch, %o1 + 0x100, #one_read) - EX_LD(LOAD(ldd, %o1 + 0x000, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x000, %f0)) LOAD(prefetch, %o1 + 0x140, #one_read) - EX_LD(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) LOAD(prefetch, %o1 + 0x180, #one_read) - EX_LD(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) LOAD(prefetch, %o1 + 0x1c0, #one_read) faligndata %f0, %f2, %f16 - EX_LD(LOAD(ldd, %o1 + 0x018, %f6)) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) faligndata %f2, %f4, %f18 - EX_LD(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) faligndata %f4, %f6, %f20 - EX_LD(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) faligndata %f6, %f8, %f22 - EX_LD(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) faligndata %f8, %f10, %f24 - EX_LD(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) faligndata %f10, %f12, %f26 - EX_LD(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) subcc GLOBAL_SPARE, 0x80, GLOBAL_SPARE add %o1, 0x40, %o1 @@ -184,26 +190,26 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ .align 64 1: - EX_LD(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) faligndata %f12, %f14, %f28 - EX_LD(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) faligndata %f14, %f0, %f30 - EX_ST(STORE_BLK(%f16, %o0)) - EX_LD(LOAD(ldd, %o1 + 0x018, %f6)) + EX_ST_FP(STORE_BLK(%f16, %o0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) faligndata %f0, %f2, %f16 add %o0, 0x40, %o0 - EX_LD(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) faligndata %f2, %f4, %f18 - EX_LD(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) faligndata %f4, %f6, %f20 - EX_LD(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) subcc %o3, 0x01, %o3 faligndata %f6, %f8, %f22 - EX_LD(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) faligndata %f8, %f10, %f24 - EX_LD(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) LOAD(prefetch, %o1 + 0x1c0, #one_read) faligndata %f10, %f12, %f26 bg,pt %XCC, 1b @@ -211,29 +217,29 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ /* Finally we copy the last full 64-byte block. */ 2: - EX_LD(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) faligndata %f12, %f14, %f28 - EX_LD(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) faligndata %f14, %f0, %f30 - EX_ST(STORE_BLK(%f16, %o0)) - EX_LD(LOAD(ldd, %o1 + 0x018, %f6)) + EX_ST_FP(STORE_BLK(%f16, %o0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) faligndata %f0, %f2, %f16 - EX_LD(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) faligndata %f2, %f4, %f18 - EX_LD(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) faligndata %f4, %f6, %f20 - EX_LD(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) faligndata %f6, %f8, %f22 - EX_LD(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) faligndata %f8, %f10, %f24 cmp %g1, 0 be,pt %XCC, 1f add %o0, 0x40, %o0 - EX_LD(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) 1: faligndata %f10, %f12, %f26 faligndata %f12, %f14, %f28 faligndata %f14, %f0, %f30 - EX_ST(STORE_BLK(%f16, %o0)) + EX_ST_FP(STORE_BLK(%f16, %o0)) add %o0, 0x40, %o0 add %o1, 0x40, %o1 membar #Sync @@ -253,20 +259,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %o2, %g2, %o2 be,a,pt %XCC, 1f - EX_LD(LOAD(ldd, %o1 + 0x00, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x00, %f0)) -1: EX_LD(LOAD(ldd, %o1 + 0x08, %f2)) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f2)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f0, %f2, %f8 - EX_ST(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0)) be,pn %XCC, 2f add %o0, 0x8, %o0 - EX_LD(LOAD(ldd, %o1 + 0x08, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f0)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f2, %f0, %f8 - EX_ST(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0)) bne,pn %XCC, 1b add %o0, 0x8, %o0 -- cgit v0.10.2 From 079317a65d05ce52b69b7d47fe1fb419d40a4395 Mon Sep 17 00:00:00 2001 From: Vijay Kumar Date: Wed, 23 Dec 2015 10:55:33 -0800 Subject: tty/serial: Skip 'NULL' char after console break when sysrq enabled When sysrq is triggered from console, serial driver for SUN hypervisor console receives a console break and enables the sysrq. It expects a valid sysrq char following with break. Meanwhile if driver receives 'NULL' ASCII char then it disables sysrq and sysrq handler will never be invoked. This fix skips calling uart sysrq handler when 'NULL' is received while sysrq is enabled. Signed-off-by: Vijay Kumar Acked-by: Karl Volz Signed-off-by: David S. Miller diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index f224e8a..ca0d380 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -148,8 +148,10 @@ static int receive_chars_read(struct uart_port *port) uart_handle_dcd_change(port, 1); } - for (i = 0; i < bytes_read; i++) - uart_handle_sysrq_char(port, con_read_page[i]); + if (port->sysrq != 0 && *con_read_page) { + for (i = 0; i < bytes_read; i++) + uart_handle_sysrq_char(port, con_read_page[i]); + } if (port->state == NULL) continue; -- cgit v0.10.2 From 930c0f708e156613c37b97cf583c4c6b07d99cce Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 25 Dec 2015 12:09:30 -0500 Subject: MIPS: Fix bitrot in __get_user_unaligned() Signed-off-by: Al Viro Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 2e3b399..095ecaf 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -599,7 +599,7 @@ extern void __put_user_unknown(void); * On error, the variable @x is set to zero. */ #define __get_user_unaligned(x,ptr) \ - __get_user__unalignednocheck((x),(ptr),sizeof(*(ptr))) + __get_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr))) /* * Yuck. We need two variants, one for 64bit operation and one @@ -620,8 +620,8 @@ extern void __get_user_unaligned_unknown(void); do { \ switch (size) { \ case 1: __get_data_asm(val, "lb", ptr); break; \ - case 2: __get_user_unaligned_asm(val, "ulh", ptr); break; \ - case 4: __get_user_unaligned_asm(val, "ulw", ptr); break; \ + case 2: __get_data_unaligned_asm(val, "ulh", ptr); break; \ + case 4: __get_data_unaligned_asm(val, "ulw", ptr); break; \ case 8: __GET_USER_UNALIGNED_DW(val, ptr); break; \ default: __get_user_unaligned_unknown(); break; \ } \ -- cgit v0.10.2 From 74bf8efb5fa6e958d2d7c7917b8bb672085ec0c6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 27 Dec 2015 18:17:37 -0800 Subject: Linux 4.4-rc7 diff --git a/Makefile b/Makefile index 4e2b18d..1122433 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 4 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Blurry Fish Butt # *DOCUMENTATION* -- cgit v0.10.2 From 9ba0b9636dc07a328ad3bffe9b22edb4cbb2901b Mon Sep 17 00:00:00 2001 From: Marcelo Ricardo Leitner Date: Wed, 23 Dec 2015 16:28:40 -0200 Subject: sctp: use GFP_USER for user-controlled kmalloc Commit cacc06215271 ("sctp: use GFP_USER for user-controlled kmalloc") missed two other spots. For connectx, as it's more likely to be used by kernel users of the API, it detects if GFP_USER should be used or not. Fixes: cacc06215271 ("sctp: use GFP_USER for user-controlled kmalloc") Reported-by: Dmitry Vyukov Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 9b6cc6d..570f96a 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1301,8 +1301,9 @@ static int __sctp_setsockopt_connectx(struct sock *sk, int addrs_size, sctp_assoc_t *assoc_id) { - int err = 0; struct sockaddr *kaddrs; + gfp_t gfp = GFP_KERNEL; + int err = 0; pr_debug("%s: sk:%p addrs:%p addrs_size:%d\n", __func__, sk, addrs, addrs_size); @@ -1315,7 +1316,9 @@ static int __sctp_setsockopt_connectx(struct sock *sk, return -EFAULT; /* Alloc space for the address array in kernel memory. */ - kaddrs = kmalloc(addrs_size, GFP_KERNEL); + if (sk->sk_socket->file) + gfp = GFP_USER | __GFP_NOWARN; + kaddrs = kmalloc(addrs_size, gfp); if (unlikely(!kaddrs)) return -ENOMEM; @@ -5773,7 +5776,7 @@ static int sctp_getsockopt_assoc_ids(struct sock *sk, int len, len = sizeof(struct sctp_assoc_ids) + sizeof(sctp_assoc_t) * num; - ids = kmalloc(len, GFP_KERNEL); + ids = kmalloc(len, GFP_USER | __GFP_NOWARN); if (unlikely(!ids)) return -ENOMEM; -- cgit v0.10.2 From 3538a5c8ffa37c715029af4a2e384c077558eb18 Mon Sep 17 00:00:00 2001 From: Marcelo Ricardo Leitner Date: Wed, 23 Dec 2015 16:44:09 -0200 Subject: sctp: label accepted/peeled off sockets Accepted or peeled off sockets were missing a security label (e.g. SELinux) which means that socket was in "unlabeled" state. This patch clones the sock's label from the parent sock and resolves the issue (similar to AF_BLUETOOTH protocol family). Cc: Paul Moore Cc: David Teigland Signed-off-by: Marcelo Ricardo Leitner Acked-by: Paul Moore Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 570f96a..529ed35 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -7202,6 +7202,8 @@ void sctp_copy_sock(struct sock *newsk, struct sock *sk, if (newsk->sk_flags & SK_FLAGS_TIMESTAMP) net_enable_timestamp(); + + security_sk_clone(sk, newsk); } static inline void sctp_copy_descendant(struct sock *sk_to, -- cgit v0.10.2 From c6002d5602ab36c19ef4fe0e20ecfa28aaabf028 Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Thu, 24 Dec 2015 13:14:05 -0500 Subject: RDMA/ocrdma: Fix vlan-id assignment in qp parameters vlan-id is wrongly getting as 0 when PFC is enabled. Set vlan-id configured by user in QP parameters. In case vlan interface is not used, flash a warning to user to configure vlan and assign vlan-id as 0 in qp params. Fixes: dbf727de7440 ('IB/core: Use GID table in AH creation and dmac resolution') Cc: Matan Barak Signed-off-by: Devesh Sharma Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 30f67be..4fc2bb4 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -2515,9 +2515,10 @@ static int ocrdma_set_av_params(struct ocrdma_qp *qp, ocrdma_cpu_to_le32(&cmd->params.sgid[0], sizeof(cmd->params.sgid)); cmd->params.vlan_dmac_b4_to_b5 = mac_addr[4] | (mac_addr[5] << 8); - if (vlan_id < 0x1000) { - if (dev->pfc_state) { - vlan_id = 0; + if (vlan_id == 0xFFFF) + vlan_id = 0; + if (vlan_id || dev->pfc_state) { + if (!vlan_id) { pr_err("ocrdma%d:Using VLAN with PFC is recommended\n", dev->id); pr_err("ocrdma%d:Using VLAN 0 for this connection\n", -- cgit v0.10.2 From 36ac0db0dbf7081afe4137d444ef85614213b8eb Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Thu, 24 Dec 2015 13:14:06 -0500 Subject: RDMA/ocrdma: Dispatch only port event when port state changes Dispatch only port event to IB stack when port state changes. Don't explicitly modify qps to error. Let application listen to port events on async event queue or let QP fail with retry-exceeded completion error. Signed-off-by: Padmanabh Ratnakar Signed-off-by: Devesh Sharma Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c index 62b7009..ebe40b4 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c @@ -386,30 +386,7 @@ static int ocrdma_open(struct ocrdma_dev *dev) static int ocrdma_close(struct ocrdma_dev *dev) { - int i; - struct ocrdma_qp *qp, **cur_qp; struct ib_event err_event; - struct ib_qp_attr attrs; - int attr_mask = IB_QP_STATE; - - attrs.qp_state = IB_QPS_ERR; - mutex_lock(&dev->dev_lock); - if (dev->qp_tbl) { - cur_qp = dev->qp_tbl; - for (i = 0; i < OCRDMA_MAX_QP; i++) { - qp = cur_qp[i]; - if (qp && qp->ibqp.qp_type != IB_QPT_GSI) { - /* change the QP state to ERROR */ - _ocrdma_modify_qp(&qp->ibqp, &attrs, attr_mask); - - err_event.event = IB_EVENT_QP_FATAL; - err_event.element.qp = &qp->ibqp; - err_event.device = &dev->ibdev; - ib_dispatch_event(&err_event); - } - } - } - mutex_unlock(&dev->dev_lock); err_event.event = IB_EVENT_PORT_ERR; err_event.element.port_num = 1; -- cgit v0.10.2 From 10a214dc996236e6547b84fb5ca007316b30c2e6 Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Thu, 24 Dec 2015 13:14:07 -0500 Subject: RDMA/ocrdma: Depend on async link events from CNA Recently Dough Ledford reported a deadlock happening between ocrdma-load sequence and NetworkManager service issuing "open" on be2net interface. The deadlock happens when any be2net hook (e.g. open/close) is called in parallel to insmod ocrdma.ko. A. be2net is sending administrative open/close event to ocrdma holding device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net. So sequence of locks is rtnl_lock---> device_list lock B. When new ocrdma roce device gets registered, infiniband stack now takes rtnl_lock in ib_register_device() in GID initialization routines. So sequence of locks in this path is device_list lock ---> rtnl_lock. This improper locking sequence causes deadlock. With this patch we stop using administrative open and close events injected by be2net driver. These events were used to dispatch PORT_ACTIVE and PORT_ERROR events to the IB-stack. This patch implements a logic to receive async-link-events generated from CNA whenever link-state-change is detected. Now on, these async-events will be used to dispatch PORT_ACTIVE and PORT_ERROR events to IB-stack. Depending on async-events from CNA removes the need to hold device-list-mutex and thus breaks the busy-wait scenario. Reported-by: Doug Ledford CC: Sathya Perla Signed-off-by: Padmanabh Ratnakar Signed-off-by: Selvin Xavier Signed-off-by: Devesh Sharma Signed-off-by: Doug Ledford diff --git a/drivers/infiniband/hw/ocrdma/ocrdma.h b/drivers/infiniband/hw/ocrdma/ocrdma.h index ae80590..040bb8b 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma.h @@ -232,6 +232,10 @@ struct phy_info { u16 interface_type; }; +enum ocrdma_flags { + OCRDMA_FLAGS_LINK_STATUS_INIT = 0x01 +}; + struct ocrdma_dev { struct ib_device ibdev; struct ocrdma_dev_attr attr; @@ -287,6 +291,7 @@ struct ocrdma_dev { atomic_t update_sl; u16 pvid; u32 asic_id; + u32 flags; ulong last_stats_time; struct mutex stats_lock; /* provide synch for debugfs operations */ @@ -591,4 +596,9 @@ static inline u8 ocrdma_is_enabled_and_synced(u32 state) (state & OCRDMA_STATE_FLAG_SYNC); } +static inline u8 ocrdma_get_ae_link_state(u32 ae_state) +{ + return ((ae_state & OCRDMA_AE_LSC_LS_MASK) >> OCRDMA_AE_LSC_LS_SHIFT); +} + #endif diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 4fc2bb4..283ca84 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -579,6 +579,8 @@ static int ocrdma_mbx_create_mq(struct ocrdma_dev *dev, cmd->async_event_bitmap = BIT(OCRDMA_ASYNC_GRP5_EVE_CODE); cmd->async_event_bitmap |= BIT(OCRDMA_ASYNC_RDMA_EVE_CODE); + /* Request link events on this MQ. */ + cmd->async_event_bitmap |= BIT(OCRDMA_ASYNC_LINK_EVE_CODE); cmd->async_cqid_ringsize = cq->id; cmd->async_cqid_ringsize |= (ocrdma_encoded_q_len(mq->len) << @@ -819,20 +821,42 @@ static void ocrdma_process_grp5_aync(struct ocrdma_dev *dev, } } +static void ocrdma_process_link_state(struct ocrdma_dev *dev, + struct ocrdma_ae_mcqe *cqe) +{ + struct ocrdma_ae_lnkst_mcqe *evt; + u8 lstate; + + evt = (struct ocrdma_ae_lnkst_mcqe *)cqe; + lstate = ocrdma_get_ae_link_state(evt->speed_state_ptn); + + if (!(lstate & OCRDMA_AE_LSC_LLINK_MASK)) + return; + + if (dev->flags & OCRDMA_FLAGS_LINK_STATUS_INIT) + ocrdma_update_link_state(dev, (lstate & OCRDMA_LINK_ST_MASK)); +} + static void ocrdma_process_acqe(struct ocrdma_dev *dev, void *ae_cqe) { /* async CQE processing */ struct ocrdma_ae_mcqe *cqe = ae_cqe; u32 evt_code = (cqe->valid_ae_event & OCRDMA_AE_MCQE_EVENT_CODE_MASK) >> OCRDMA_AE_MCQE_EVENT_CODE_SHIFT; - - if (evt_code == OCRDMA_ASYNC_RDMA_EVE_CODE) + switch (evt_code) { + case OCRDMA_ASYNC_LINK_EVE_CODE: + ocrdma_process_link_state(dev, cqe); + break; + case OCRDMA_ASYNC_RDMA_EVE_CODE: ocrdma_dispatch_ibevent(dev, cqe); - else if (evt_code == OCRDMA_ASYNC_GRP5_EVE_CODE) + break; + case OCRDMA_ASYNC_GRP5_EVE_CODE: ocrdma_process_grp5_aync(dev, cqe); - else + break; + default: pr_err("%s(%d) invalid evt code=0x%x\n", __func__, dev->id, evt_code); + } } static void ocrdma_process_mcqe(struct ocrdma_dev *dev, struct ocrdma_mcqe *cqe) @@ -1363,7 +1387,8 @@ mbx_err: return status; } -int ocrdma_mbx_get_link_speed(struct ocrdma_dev *dev, u8 *lnk_speed) +int ocrdma_mbx_get_link_speed(struct ocrdma_dev *dev, u8 *lnk_speed, + u8 *lnk_state) { int status = -ENOMEM; struct ocrdma_get_link_speed_rsp *rsp; @@ -1384,8 +1409,11 @@ int ocrdma_mbx_get_link_speed(struct ocrdma_dev *dev, u8 *lnk_speed) goto mbx_err; rsp = (struct ocrdma_get_link_speed_rsp *)cmd; - *lnk_speed = (rsp->pflt_pps_ld_pnum & OCRDMA_PHY_PS_MASK) - >> OCRDMA_PHY_PS_SHIFT; + if (lnk_speed) + *lnk_speed = (rsp->pflt_pps_ld_pnum & OCRDMA_PHY_PS_MASK) + >> OCRDMA_PHY_PS_SHIFT; + if (lnk_state) + *lnk_state = (rsp->res_lnk_st & OCRDMA_LINK_ST_MASK); mbx_err: kfree(cmd); diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.h b/drivers/infiniband/hw/ocrdma/ocrdma_hw.h index 7ed885c..ebc1f44 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.h @@ -106,7 +106,8 @@ void ocrdma_ring_cq_db(struct ocrdma_dev *, u16 cq_id, bool armed, bool solicited, u16 cqe_popped); /* verbs specific mailbox commands */ -int ocrdma_mbx_get_link_speed(struct ocrdma_dev *dev, u8 *lnk_speed); +int ocrdma_mbx_get_link_speed(struct ocrdma_dev *dev, u8 *lnk_speed, + u8 *lnk_st); int ocrdma_query_config(struct ocrdma_dev *, struct ocrdma_mbx_query_config *config); @@ -153,5 +154,6 @@ char *port_speed_string(struct ocrdma_dev *dev); void ocrdma_init_service_level(struct ocrdma_dev *); void ocrdma_alloc_pd_pool(struct ocrdma_dev *dev); void ocrdma_free_pd_range(struct ocrdma_dev *dev); +void ocrdma_update_link_state(struct ocrdma_dev *dev, u8 lstate); #endif /* __OCRDMA_HW_H__ */ diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c index ebe40b4..3afb40b 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c @@ -290,6 +290,7 @@ static void ocrdma_remove_sysfiles(struct ocrdma_dev *dev) static struct ocrdma_dev *ocrdma_add(struct be_dev_info *dev_info) { int status = 0, i; + u8 lstate = 0; struct ocrdma_dev *dev; dev = (struct ocrdma_dev *)ib_alloc_device(sizeof(struct ocrdma_dev)); @@ -319,6 +320,11 @@ static struct ocrdma_dev *ocrdma_add(struct be_dev_info *dev_info) if (status) goto alloc_err; + /* Query Link state and update */ + status = ocrdma_mbx_get_link_speed(dev, NULL, &lstate); + if (!status) + ocrdma_update_link_state(dev, lstate); + for (i = 0; i < ARRAY_SIZE(ocrdma_attributes); i++) if (device_create_file(&dev->ibdev.dev, ocrdma_attributes[i])) goto sysfs_err; @@ -373,7 +379,7 @@ static void ocrdma_remove(struct ocrdma_dev *dev) ocrdma_remove_free(dev); } -static int ocrdma_open(struct ocrdma_dev *dev) +static int ocrdma_dispatch_port_active(struct ocrdma_dev *dev) { struct ib_event port_event; @@ -384,7 +390,7 @@ static int ocrdma_open(struct ocrdma_dev *dev) return 0; } -static int ocrdma_close(struct ocrdma_dev *dev) +static int ocrdma_dispatch_port_error(struct ocrdma_dev *dev) { struct ib_event err_event; @@ -397,7 +403,7 @@ static int ocrdma_close(struct ocrdma_dev *dev) static void ocrdma_shutdown(struct ocrdma_dev *dev) { - ocrdma_close(dev); + ocrdma_dispatch_port_error(dev); ocrdma_remove(dev); } @@ -408,18 +414,28 @@ static void ocrdma_shutdown(struct ocrdma_dev *dev) static void ocrdma_event_handler(struct ocrdma_dev *dev, u32 event) { switch (event) { - case BE_DEV_UP: - ocrdma_open(dev); - break; - case BE_DEV_DOWN: - ocrdma_close(dev); - break; case BE_DEV_SHUTDOWN: ocrdma_shutdown(dev); break; + default: + break; } } +void ocrdma_update_link_state(struct ocrdma_dev *dev, u8 lstate) +{ + if (!(dev->flags & OCRDMA_FLAGS_LINK_STATUS_INIT)) { + dev->flags |= OCRDMA_FLAGS_LINK_STATUS_INIT; + if (!lstate) + return; + } + + if (!lstate) + ocrdma_dispatch_port_error(dev); + else + ocrdma_dispatch_port_active(dev); +} + static struct ocrdma_driver ocrdma_drv = { .name = "ocrdma_driver", .add = ocrdma_add, diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h index 6a38268..99dd6fd 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h @@ -465,8 +465,11 @@ struct ocrdma_ae_qp_mcqe { u32 valid_ae_event; }; -#define OCRDMA_ASYNC_RDMA_EVE_CODE 0x14 -#define OCRDMA_ASYNC_GRP5_EVE_CODE 0x5 +enum ocrdma_async_event_code { + OCRDMA_ASYNC_LINK_EVE_CODE = 0x01, + OCRDMA_ASYNC_GRP5_EVE_CODE = 0x05, + OCRDMA_ASYNC_RDMA_EVE_CODE = 0x14 +}; enum ocrdma_async_grp5_events { OCRDMA_ASYNC_EVENT_QOS_VALUE = 0x01, @@ -489,6 +492,44 @@ enum OCRDMA_ASYNC_EVENT_TYPE { OCRDMA_MAX_ASYNC_ERRORS }; +struct ocrdma_ae_lnkst_mcqe { + u32 speed_state_ptn; + u32 qos_reason_falut; + u32 evt_tag; + u32 valid_ae_event; +}; + +enum { + OCRDMA_AE_LSC_PORT_NUM_MASK = 0x3F, + OCRDMA_AE_LSC_PT_SHIFT = 0x06, + OCRDMA_AE_LSC_PT_MASK = (0x03 << + OCRDMA_AE_LSC_PT_SHIFT), + OCRDMA_AE_LSC_LS_SHIFT = 0x08, + OCRDMA_AE_LSC_LS_MASK = (0xFF << + OCRDMA_AE_LSC_LS_SHIFT), + OCRDMA_AE_LSC_LD_SHIFT = 0x10, + OCRDMA_AE_LSC_LD_MASK = (0xFF << + OCRDMA_AE_LSC_LD_SHIFT), + OCRDMA_AE_LSC_PPS_SHIFT = 0x18, + OCRDMA_AE_LSC_PPS_MASK = (0xFF << + OCRDMA_AE_LSC_PPS_SHIFT), + OCRDMA_AE_LSC_PPF_MASK = 0xFF, + OCRDMA_AE_LSC_ER_SHIFT = 0x08, + OCRDMA_AE_LSC_ER_MASK = (0xFF << + OCRDMA_AE_LSC_ER_SHIFT), + OCRDMA_AE_LSC_QOS_SHIFT = 0x10, + OCRDMA_AE_LSC_QOS_MASK = (0xFFFF << + OCRDMA_AE_LSC_QOS_SHIFT) +}; + +enum { + OCRDMA_AE_LSC_PLINK_DOWN = 0x00, + OCRDMA_AE_LSC_PLINK_UP = 0x01, + OCRDMA_AE_LSC_LLINK_DOWN = 0x02, + OCRDMA_AE_LSC_LLINK_MASK = 0x02, + OCRDMA_AE_LSC_LLINK_UP = 0x03 +}; + /* mailbox command request and responses */ enum { OCRDMA_MBX_QUERY_CFG_CQ_OVERFLOW_SHIFT = 2, @@ -676,7 +717,7 @@ enum { OCRDMA_PHY_PFLT_SHIFT = 0x18, OCRDMA_QOS_LNKSP_MASK = 0xFFFF0000, OCRDMA_QOS_LNKSP_SHIFT = 0x10, - OCRDMA_LLST_MASK = 0xFF, + OCRDMA_LINK_ST_MASK = 0x01, OCRDMA_PLFC_MASK = 0x00000400, OCRDMA_PLFC_SHIFT = 0x8, OCRDMA_PLRFC_MASK = 0x00000200, @@ -691,7 +732,7 @@ struct ocrdma_get_link_speed_rsp { u32 pflt_pps_ld_pnum; u32 qos_lsp; - u32 res_lls; + u32 res_lnk_st; }; enum { diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index 583001b..76e96f9 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -171,7 +171,7 @@ static inline void get_link_speed_and_width(struct ocrdma_dev *dev, int status; u8 speed; - status = ocrdma_mbx_get_link_speed(dev, &speed); + status = ocrdma_mbx_get_link_speed(dev, &speed, NULL); if (status) speed = OCRDMA_PHYS_LINK_SPEED_ZERO; -- cgit v0.10.2 From f41647ef06536199d3366530da050b411546979d Mon Sep 17 00:00:00 2001 From: Devesh Sharma Date: Thu, 24 Dec 2015 13:14:08 -0500 Subject: RDMA/be2net: Remove open and close entry points Recently Dough Ledford reported a deadlock happening between ocrdma-load sequence and NetworkManager service issueing "open" on be2net interface. The deadlock happens when any be2net hook (e.g. open/close) is called in parallel to insmod ocrdma.ko. A. be2net is sending administrative open/close event to ocrdma holding device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net. So sequence of locks is rtnl_lock---> device_list lock B. When new ocrdma roce device gets registered, infiniband stack now takes rtnl_lock in ib_register_device() in GID initialization routines. So sequence of locks in this path is device_list lock ---> rtnl_lock. This improper locking sequence causes deadlock. In order to resolve the above deadlock condition, ocrdma intorduced a patch to stop listening to administrative open/close events generated from be2net driver. It now depends on link-state-change async-event generated from CNA. This change leaves behind dead code which used to generate administrative open/close events. This patch cleans-up all that dead code from be2net. Reported-by: Doug Ledford CC: Sathya Perla Signed-off-by: Padmanabh Ratnakar Signed-off-by: Selvin Xavier Signed-off-by: Devesh Sharma Signed-off-by: Doug Ledford diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index d463563..6ee78c2 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -848,8 +848,6 @@ void be_roce_dev_remove(struct be_adapter *); /* * internal function to open-close roce device during ifup-ifdown. */ -void be_roce_dev_open(struct be_adapter *); -void be_roce_dev_close(struct be_adapter *); void be_roce_dev_shutdown(struct be_adapter *); #endif /* BE_H */ diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index b6ad029..ff2ff89 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3432,8 +3432,6 @@ static int be_close(struct net_device *netdev) be_disable_if_filters(adapter); - be_roce_dev_close(adapter); - if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { for_all_evt_queues(adapter, eqo, i) { napi_disable(&eqo->napi); @@ -3601,8 +3599,6 @@ static int be_open(struct net_device *netdev) be_link_status_update(adapter, link_status); netif_tx_start_all_queues(netdev); - be_roce_dev_open(adapter); - #ifdef CONFIG_BE2NET_VXLAN if (skyhawk_chip(adapter)) vxlan_get_rx_port(netdev); diff --git a/drivers/net/ethernet/emulex/benet/be_roce.c b/drivers/net/ethernet/emulex/benet/be_roce.c index 6036820..4089156 100644 --- a/drivers/net/ethernet/emulex/benet/be_roce.c +++ b/drivers/net/ethernet/emulex/benet/be_roce.c @@ -116,40 +116,6 @@ void be_roce_dev_remove(struct be_adapter *adapter) } } -static void _be_roce_dev_open(struct be_adapter *adapter) -{ - if (ocrdma_drv && adapter->ocrdma_dev && - ocrdma_drv->state_change_handler) - ocrdma_drv->state_change_handler(adapter->ocrdma_dev, - BE_DEV_UP); -} - -void be_roce_dev_open(struct be_adapter *adapter) -{ - if (be_roce_supported(adapter)) { - mutex_lock(&be_adapter_list_lock); - _be_roce_dev_open(adapter); - mutex_unlock(&be_adapter_list_lock); - } -} - -static void _be_roce_dev_close(struct be_adapter *adapter) -{ - if (ocrdma_drv && adapter->ocrdma_dev && - ocrdma_drv->state_change_handler) - ocrdma_drv->state_change_handler(adapter->ocrdma_dev, - BE_DEV_DOWN); -} - -void be_roce_dev_close(struct be_adapter *adapter) -{ - if (be_roce_supported(adapter)) { - mutex_lock(&be_adapter_list_lock); - _be_roce_dev_close(adapter); - mutex_unlock(&be_adapter_list_lock); - } -} - void be_roce_dev_shutdown(struct be_adapter *adapter) { if (be_roce_supported(adapter)) { @@ -177,8 +143,6 @@ int be_roce_register_driver(struct ocrdma_driver *drv) _be_roce_dev_add(dev); netdev = dev->netdev; - if (netif_running(netdev) && netif_oper_up(netdev)) - _be_roce_dev_open(dev); } mutex_unlock(&be_adapter_list_lock); return 0; diff --git a/drivers/net/ethernet/emulex/benet/be_roce.h b/drivers/net/ethernet/emulex/benet/be_roce.h index cde6ef9..fde6097 100644 --- a/drivers/net/ethernet/emulex/benet/be_roce.h +++ b/drivers/net/ethernet/emulex/benet/be_roce.h @@ -60,9 +60,7 @@ struct ocrdma_driver { void (*state_change_handler) (struct ocrdma_dev *, u32 new_state); }; -enum { - BE_DEV_UP = 0, - BE_DEV_DOWN = 1, +enum be_roce_event { BE_DEV_SHUTDOWN = 2 }; -- cgit v0.10.2 From 21491412f2ec6f13d4104de734dec0ba659d092e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 28 Dec 2015 13:01:22 -0700 Subject: block: add blk_start_queue_async() We currently only have an inline/sync helper to restart a stopped queue. If drivers need an async version, they have to roll their own. Add a generic helper instead. Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index c487b94..33e2f62 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -207,6 +207,22 @@ void blk_delay_queue(struct request_queue *q, unsigned long msecs) EXPORT_SYMBOL(blk_delay_queue); /** + * blk_start_queue_async - asynchronously restart a previously stopped queue + * @q: The &struct request_queue in question + * + * Description: + * blk_start_queue_async() will clear the stop flag on the queue, and + * ensure that the request_fn for the queue is run from an async + * context. + **/ +void blk_start_queue_async(struct request_queue *q) +{ + queue_flag_clear(QUEUE_FLAG_STOPPED, q); + blk_run_queue_async(q); +} +EXPORT_SYMBOL(blk_start_queue_async); + +/** * blk_start_queue - restart a previously stopped queue * @q: The &struct request_queue in question * diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 0169ba2..c70e358 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -797,6 +797,7 @@ extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t, extern int blk_queue_enter(struct request_queue *q, gfp_t gfp); extern void blk_queue_exit(struct request_queue *q); extern void blk_start_queue(struct request_queue *q); +extern void blk_start_queue_async(struct request_queue *q); extern void blk_stop_queue(struct request_queue *q); extern void blk_sync_queue(struct request_queue *q); extern void __blk_stop_queue(struct request_queue *q); -- cgit v0.10.2 From 48cc661e7f4cec80b6aa894cc6902c292f201ea8 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 28 Dec 2015 13:02:47 -0700 Subject: null_blk: use async queue restart helper If null_blk is run in NULL_IRQ_TIMER mode and with queue_mode NULL_Q_RQ, we need to restart the queue from the hrtimer interrupt. We can't directly invoke the request_fn from that context, so punt the queue run to async kblockd context. Tested-by: Rabin Vincent Signed-off-by: Jens Axboe diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c index a428e4e..09e3c0d 100644 --- a/drivers/block/null_blk.c +++ b/drivers/block/null_blk.c @@ -232,20 +232,19 @@ static void end_cmd(struct nullb_cmd *cmd) break; case NULL_Q_BIO: bio_endio(cmd->bio); - goto free_cmd; + break; } + free_cmd(cmd); + /* Restart queue if needed, as we are freeing a tag */ - if (q && !q->mq_ops && blk_queue_stopped(q)) { + if (queue_mode == NULL_Q_RQ && blk_queue_stopped(q)) { unsigned long flags; spin_lock_irqsave(q->queue_lock, flags); - if (blk_queue_stopped(q)) - blk_start_queue(q); + blk_start_queue_async(q); spin_unlock_irqrestore(q->queue_lock, flags); } -free_cmd: - free_cmd(cmd); } static enum hrtimer_restart null_cmd_timer_expired(struct hrtimer *timer) -- cgit v0.10.2 From c3293a9ac2a4f9160b85b5e986a8e0c54986e7f7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Matias=20Bj=C3=B8rling?= Date: Tue, 29 Dec 2015 14:37:56 +0100 Subject: lightnvm: wrong offset in bad blk lun calculation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dev->nr_luns reports the total number of luns available in a device while dev->luns_per_chnl is the number of luns per channel. When multiple channels are available, the offset is calculated from a channel and lun id into a linear array. As it multiplies with the total number of luns, we go out of bound when channel id > 0 and causes the kernel to panic when we read a protected kernel memory area. Signed-off-by: Matias Bjørling Signed-off-by: Jens Axboe diff --git a/drivers/lightnvm/gennvm.c b/drivers/lightnvm/gennvm.c index f434e89..a54b339 100644 --- a/drivers/lightnvm/gennvm.c +++ b/drivers/lightnvm/gennvm.c @@ -75,7 +75,7 @@ static int gennvm_block_bb(struct ppa_addr ppa, int nr_blocks, u8 *blks, struct nvm_block *blk; int i; - lun = &gn->luns[(dev->nr_luns * ppa.g.ch) + ppa.g.lun]; + lun = &gn->luns[(dev->luns_per_chnl * ppa.g.ch) + ppa.g.lun]; for (i = 0; i < nr_blocks; i++) { if (blks[i] == 0) -- cgit v0.10.2 From 76cc404bfdc0d419c720de4daaf2584542734f42 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 28 Dec 2015 20:47:08 -0500 Subject: [PATCH] arm: fix handling of F_OFD_... in oabi_fcntl64() Cc: stable@vger.kernel.org # 3.15+ Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index b83f3b7..087acb5 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -193,15 +193,44 @@ struct oabi_flock64 { pid_t l_pid; } __attribute__ ((packed,aligned(4))); -asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, +static long do_locks(unsigned int fd, unsigned int cmd, unsigned long arg) { - struct oabi_flock64 user; struct flock64 kernel; - mm_segment_t fs = USER_DS; /* initialized to kill a warning */ - unsigned long local_arg = arg; - int ret; + struct oabi_flock64 user; + mm_segment_t fs; + long ret; + + if (copy_from_user(&user, (struct oabi_flock64 __user *)arg, + sizeof(user))) + return -EFAULT; + kernel.l_type = user.l_type; + kernel.l_whence = user.l_whence; + kernel.l_start = user.l_start; + kernel.l_len = user.l_len; + kernel.l_pid = user.l_pid; + + fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_fcntl64(fd, cmd, (unsigned long)&kernel); + set_fs(fs); + + if (!ret && (cmd == F_GETLK64 || cmd == F_OFD_GETLK)) { + user.l_type = kernel.l_type; + user.l_whence = kernel.l_whence; + user.l_start = kernel.l_start; + user.l_len = kernel.l_len; + user.l_pid = kernel.l_pid; + if (copy_to_user((struct oabi_flock64 __user *)arg, + &user, sizeof(user))) + ret = -EFAULT; + } + return ret; +} +asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, + unsigned long arg) +{ switch (cmd) { case F_OFD_GETLK: case F_OFD_SETLK: @@ -209,39 +238,11 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, case F_GETLK64: case F_SETLK64: case F_SETLKW64: - if (copy_from_user(&user, (struct oabi_flock64 __user *)arg, - sizeof(user))) - return -EFAULT; - kernel.l_type = user.l_type; - kernel.l_whence = user.l_whence; - kernel.l_start = user.l_start; - kernel.l_len = user.l_len; - kernel.l_pid = user.l_pid; - local_arg = (unsigned long)&kernel; - fs = get_fs(); - set_fs(KERNEL_DS); - } - - ret = sys_fcntl64(fd, cmd, local_arg); + return do_locks(fd, cmd, arg); - switch (cmd) { - case F_GETLK64: - if (!ret) { - user.l_type = kernel.l_type; - user.l_whence = kernel.l_whence; - user.l_start = kernel.l_start; - user.l_len = kernel.l_len; - user.l_pid = kernel.l_pid; - if (copy_to_user((struct oabi_flock64 __user *)arg, - &user, sizeof(user))) - ret = -EFAULT; - } - case F_SETLK64: - case F_SETLKW64: - set_fs(fs); + default: + return sys_fcntl64(fd, cmd, arg); } - - return ret; } struct oabi_epoll_event { -- cgit v0.10.2 From 90c7afc96cbbd77f44094b5b651261968e97de67 Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Wed, 23 Dec 2015 14:39:27 -0800 Subject: openvswitch: Fix template leak in error cases. Commit 5b48bb8506c5 ("openvswitch: Fix helper reference leak") fixed a reference leak on helper objects, but inadvertently introduced a leak on the ct template. Previously, ct_info.ct->general.use was initialized to 0 by nf_ct_tmpl_alloc() and only incremented when ovs_ct_copy_action() returned successful. If an error occurred while adding the helper or adding the action to the actions buffer, the __ovs_ct_free_action() cleanup would use nf_ct_put() to free the entry; However, this relies on atomic_dec_and_test(ct_info.ct->general.use). This reference must be incremented first, or nf_ct_put() will never free it. Fix the issue by acquiring a reference to the template immediately after allocation. Fixes: cae3a2627520 ("openvswitch: Allow attaching helpers to ct action") Fixes: 5b48bb8506c5 ("openvswitch: Fix helper reference leak") Signed-off-by: Joe Stringer Signed-off-by: David S. Miller diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index 3e88922..e004067 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -698,6 +698,10 @@ int ovs_ct_copy_action(struct net *net, const struct nlattr *attr, OVS_NLERR(log, "Failed to allocate conntrack template"); return -ENOMEM; } + + __set_bit(IPS_CONFIRMED_BIT, &ct_info.ct->status); + nf_conntrack_get(&ct_info.ct->ct_general); + if (helper) { err = ovs_ct_add_helper(&ct_info, helper, key, log); if (err) @@ -709,8 +713,6 @@ int ovs_ct_copy_action(struct net *net, const struct nlattr *attr, if (err) goto err_free_ct; - __set_bit(IPS_CONFIRMED_BIT, &ct_info.ct->status); - nf_conntrack_get(&ct_info.ct->ct_general); return 0; err_free_ct: __ovs_ct_free_action(&ct_info); -- cgit v0.10.2 From c1e3334fa4b2891752f1367b47a60209353ba2f5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 26 Dec 2015 20:12:13 +0100 Subject: drivers: net: cpsw: fix error return code Propagate the return value of platform_get_irq on failure. A simplified version of the semantic match that finds the two cases where no error code is returned at all is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 3b489ca..fc95806 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2427,7 +2427,7 @@ static int cpsw_probe(struct platform_device *pdev) ndev->irq = platform_get_irq(pdev, 1); if (ndev->irq < 0) { dev_err(priv->dev, "error getting irq resource\n"); - ret = -ENOENT; + ret = ndev->irq; goto clean_ale_ret; } @@ -2448,8 +2448,10 @@ static int cpsw_probe(struct platform_device *pdev) /* RX IRQ */ irq = platform_get_irq(pdev, 1); - if (irq < 0) + if (irq < 0) { + ret = irq; goto clean_ale_ret; + } priv->irqs_table[0] = irq; ret = devm_request_irq(&pdev->dev, irq, cpsw_rx_interrupt, @@ -2461,8 +2463,10 @@ static int cpsw_probe(struct platform_device *pdev) /* TX IRQ */ irq = platform_get_irq(pdev, 2); - if (irq < 0) + if (irq < 0) { + ret = irq; goto clean_ale_ret; + } priv->irqs_table[1] = irq; ret = devm_request_irq(&pdev->dev, irq, cpsw_tx_interrupt, -- cgit v0.10.2 From 5c9ee4cbf2a945271f25b89b137f2c03bbc3be33 Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Tue, 29 Dec 2015 14:54:06 -0800 Subject: ocfs2: fix BUG when calculate new backup super When resizing, it firstly extends the last gd. Once it should backup super in the gd, it calculates new backup super and update the corresponding value. But it currently doesn't consider the situation that the backup super is already done. And in this case, it still sets the bit in gd bitmap and then decrease from bg_free_bits_count, which leads to a corrupted gd and trigger the BUG in ocfs2_block_group_set_bits: BUG_ON(le16_to_cpu(bg->bg_free_bits_count) < num_bits); So check whether the backup super is done and then do the updates. Signed-off-by: Joseph Qi Reviewed-by: Jiufei Xue Reviewed-by: Yiwen Jiang Cc: Mark Fasheh Cc: Joel Becker Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/resize.c b/fs/ocfs2/resize.c index d5da6f6..79b8021 100644 --- a/fs/ocfs2/resize.c +++ b/fs/ocfs2/resize.c @@ -54,11 +54,12 @@ static u16 ocfs2_calc_new_backup_super(struct inode *inode, struct ocfs2_group_desc *gd, u16 cl_cpg, + u16 old_bg_clusters, int set) { int i; u16 backups = 0; - u32 cluster; + u32 cluster, lgd_cluster; u64 blkno, gd_blkno, lgd_blkno = le64_to_cpu(gd->bg_blkno); for (i = 0; i < OCFS2_MAX_BACKUP_SUPERBLOCKS; i++) { @@ -71,6 +72,12 @@ static u16 ocfs2_calc_new_backup_super(struct inode *inode, else if (gd_blkno > lgd_blkno) break; + /* check if already done backup super */ + lgd_cluster = ocfs2_blocks_to_clusters(inode->i_sb, lgd_blkno); + lgd_cluster += old_bg_clusters; + if (lgd_cluster >= cluster) + continue; + if (set) ocfs2_set_bit(cluster % cl_cpg, (unsigned long *)gd->bg_bitmap); @@ -99,6 +106,7 @@ static int ocfs2_update_last_group_and_inode(handle_t *handle, u16 chain, num_bits, backups = 0; u16 cl_bpc = le16_to_cpu(cl->cl_bpc); u16 cl_cpg = le16_to_cpu(cl->cl_cpg); + u16 old_bg_clusters; trace_ocfs2_update_last_group_and_inode(new_clusters, first_new_cluster); @@ -112,6 +120,7 @@ static int ocfs2_update_last_group_and_inode(handle_t *handle, group = (struct ocfs2_group_desc *)group_bh->b_data; + old_bg_clusters = le16_to_cpu(group->bg_bits) / cl_bpc; /* update the group first. */ num_bits = new_clusters * cl_bpc; le16_add_cpu(&group->bg_bits, num_bits); @@ -125,7 +134,7 @@ static int ocfs2_update_last_group_and_inode(handle_t *handle, OCFS2_FEATURE_COMPAT_BACKUP_SB)) { backups = ocfs2_calc_new_backup_super(bm_inode, group, - cl_cpg, 1); + cl_cpg, old_bg_clusters, 1); le16_add_cpu(&group->bg_free_bits_count, -1 * backups); } @@ -163,7 +172,7 @@ out_rollback: if (ret < 0) { ocfs2_calc_new_backup_super(bm_inode, group, - cl_cpg, 0); + cl_cpg, old_bg_clusters, 0); le16_add_cpu(&group->bg_free_bits_count, backups); le16_add_cpu(&group->bg_bits, -1 * num_bits); le16_add_cpu(&group->bg_free_bits_count, -1 * num_bits); -- cgit v0.10.2 From 6df38689e0e9a07ff4f42c06b302e203b33667e9 Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Tue, 29 Dec 2015 14:54:10 -0800 Subject: mm: memcontrol: fix possible memcg leak due to interrupted reclaim Memory cgroup reclaim can be interrupted with mem_cgroup_iter_break() once enough pages have been reclaimed, in which case, in contrast to a full round-trip over a cgroup sub-tree, the current position stored in mem_cgroup_reclaim_iter of the target cgroup does not get invalidated and so is left holding the reference to the last scanned cgroup. If the target cgroup does not get scanned again (we might have just reclaimed the last page or all processes might exit and free their memory voluntary), we will leak it, because there is nobody to put the reference held by the iterator. The problem is easy to reproduce by running the following command sequence in a loop: mkdir /sys/fs/cgroup/memory/test echo 100M > /sys/fs/cgroup/memory/test/memory.limit_in_bytes echo $$ > /sys/fs/cgroup/memory/test/cgroup.procs memhog 150M echo $$ > /sys/fs/cgroup/memory/cgroup.procs rmdir test The cgroups generated by it will never get freed. This patch fixes this issue by making mem_cgroup_iter avoid taking reference to the current position. In order not to hit use-after-free bug while running reclaim in parallel with cgroup deletion, we make use of ->css_released cgroup callback to clear references to the dying cgroup in all reclaim iterators that might refer to it. This callback is called right before scheduling rcu work which will free css, so if we access iter->position from rcu read section, we might be sure it won't go away under us. [hannes@cmpxchg.org: clean up css ref handling] Fixes: 5ac8fb31ad2e ("mm: memcontrol: convert reclaim iterator to simple css refcounting") Signed-off-by: Vladimir Davydov Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Acked-by: Johannes Weiner Cc: [3.19+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index e234c21..fc10620 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -903,14 +903,20 @@ struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root, if (prev && reclaim->generation != iter->generation) goto out_unlock; - do { + while (1) { pos = READ_ONCE(iter->position); + if (!pos || css_tryget(&pos->css)) + break; /* - * A racing update may change the position and - * put the last reference, hence css_tryget(), - * or retry to see the updated position. + * css reference reached zero, so iter->position will + * be cleared by ->css_released. However, we should not + * rely on this happening soon, because ->css_released + * is called from a work queue, and by busy-waiting we + * might block it. So we clear iter->position right + * away. */ - } while (pos && !css_tryget(&pos->css)); + (void)cmpxchg(&iter->position, pos, NULL); + } } if (pos) @@ -956,17 +962,13 @@ struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root, } if (reclaim) { - if (cmpxchg(&iter->position, pos, memcg) == pos) { - if (memcg) - css_get(&memcg->css); - if (pos) - css_put(&pos->css); - } - /* - * pairs with css_tryget when dereferencing iter->position - * above. + * The position could have already been updated by a competing + * thread, so check that the value hasn't changed since we read + * it to avoid reclaiming from the same cgroup twice. */ + (void)cmpxchg(&iter->position, pos, memcg); + if (pos) css_put(&pos->css); @@ -999,6 +1001,28 @@ void mem_cgroup_iter_break(struct mem_cgroup *root, css_put(&prev->css); } +static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg) +{ + struct mem_cgroup *memcg = dead_memcg; + struct mem_cgroup_reclaim_iter *iter; + struct mem_cgroup_per_zone *mz; + int nid, zid; + int i; + + while ((memcg = parent_mem_cgroup(memcg))) { + for_each_node(nid) { + for (zid = 0; zid < MAX_NR_ZONES; zid++) { + mz = &memcg->nodeinfo[nid]->zoneinfo[zid]; + for (i = 0; i <= DEF_PRIORITY; i++) { + iter = &mz->iter[i]; + cmpxchg(&iter->position, + dead_memcg, NULL); + } + } + } + } +} + /* * Iteration constructs for visiting all cgroups (under a tree). If * loops are exited prematurely (break), mem_cgroup_iter_break() must @@ -4324,6 +4348,13 @@ static void mem_cgroup_css_offline(struct cgroup_subsys_state *css) wb_memcg_offline(memcg); } +static void mem_cgroup_css_released(struct cgroup_subsys_state *css) +{ + struct mem_cgroup *memcg = mem_cgroup_from_css(css); + + invalidate_reclaim_iterators(memcg); +} + static void mem_cgroup_css_free(struct cgroup_subsys_state *css) { struct mem_cgroup *memcg = mem_cgroup_from_css(css); @@ -5185,6 +5216,7 @@ struct cgroup_subsys memory_cgrp_subsys = { .css_alloc = mem_cgroup_css_alloc, .css_online = mem_cgroup_css_online, .css_offline = mem_cgroup_css_offline, + .css_released = mem_cgroup_css_released, .css_free = mem_cgroup_css_free, .css_reset = mem_cgroup_css_reset, .can_attach = mem_cgroup_can_attach, -- cgit v0.10.2 From facca61683f937f31f90307cc64851436c8a3e21 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 29 Dec 2015 14:54:13 -0800 Subject: arch/x86/xen/suspend.c: include xen/xen.h Fix the build warning: arch/x86/xen/suspend.c: In function 'xen_arch_pre_suspend': arch/x86/xen/suspend.c:70:9: error: implicit declaration of function 'xen_pv_domain' [-Werror=implicit-function-declaration] if (xen_pv_domain()) ^ Reported-by: kbuild test robot Cc: Sasha Levin Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 3705eab..df0c405 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -1,6 +1,7 @@ #include #include +#include #include #include #include -- cgit v0.10.2 From 6122192eb6f2a3311bbf4600c5537fbe1c223022 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 29 Dec 2015 14:54:16 -0800 Subject: m32r: fix build failure m32r allmodconfig is failing with: In file included from ../include/linux/kvm_para.h:4:0, from ../kernel/watchdog.c:26: ../include/uapi/linux/kvm_para.h:30:26: fatal error: asm/kvm_para.h: No such file or directory kvm_para.h was not included in the build. Signed-off-by: Sudip Mukherjee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild index fd104bd..860e440 100644 --- a/arch/m32r/include/asm/Kbuild +++ b/arch/m32r/include/asm/Kbuild @@ -3,6 +3,7 @@ generic-y += clkdev.h generic-y += cputime.h generic-y += exec.h generic-y += irq_work.h +generic-y += kvm_para.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h generic-y += module.h -- cgit v0.10.2 From 92a8ed4c7643809123ef0a65424569eaacc5c6b0 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 29 Dec 2015 14:54:19 -0800 Subject: m32r: add io*_rep helpers m32r allmodconfig was failing with the error: error: implicit declaration of function 'read' On checking io.h it turned out that 'read' is not defined but 'readb' is defined and 'ioread8' will then obviously mean 'readb'. At the same time some of the helper functions ioreadN_rep() and iowriteN_rep() were missing which also led to the build failure. Signed-off-by: Sudip Mukherjee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h index 61b8931..4b0f5e0 100644 --- a/arch/m32r/include/asm/io.h +++ b/arch/m32r/include/asm/io.h @@ -168,13 +168,21 @@ static inline void _writel(unsigned long l, unsigned long addr) #define writew_relaxed writew #define writel_relaxed writel -#define ioread8 read +#define ioread8 readb #define ioread16 readw #define ioread32 readl #define iowrite8 writeb #define iowrite16 writew #define iowrite32 writel +#define ioread8_rep(p, dst, count) insb((unsigned long)(p), (dst), (count)) +#define ioread16_rep(p, dst, count) insw((unsigned long)(p), (dst), (count)) +#define ioread32_rep(p, dst, count) insl((unsigned long)(p), (dst), (count)) + +#define iowrite8_rep(p, src, count) outsb((unsigned long)(p), (src), (count)) +#define iowrite16_rep(p, src, count) outsw((unsigned long)(p), (src), (count)) +#define iowrite32_rep(p, src, count) outsl((unsigned long)(p), (src), (count)) + #define ioread16be(addr) be16_to_cpu(readw(addr)) #define ioread32be(addr) be32_to_cpu(readl(addr)) #define iowrite16be(v, addr) writew(cpu_to_be16(v), (addr)) -- cgit v0.10.2 From b5a8bc338e68d5f6f753e14ae59b30e75a5ffdde Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Tue, 29 Dec 2015 14:54:22 -0800 Subject: ocfs2: fix flock panic issue Commit 4f6563677ae8 ("Move locks API users to locks_lock_inode_wait()") move flock/posix lock indentify code to locks_lock_inode_wait(), but missed to set fl_flags to FL_FLOCK which caused the following kernel panic on 4.4.0_rc5. kernel BUG at fs/locks.c:1895! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2(O) ocfs2_dlmfs(O) ocfs2_stack_o2cb(O) ocfs2_dlm(O) ocfs2_nodemanager(O) ocfs2_stackglue(O) iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront CPU: 0 PID: 20268 Comm: flock_unit_test Tainted: G O 4.4.0-rc5-next-20151217 #1 Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 task: ffff88007b3672c0 ti: ffff880028b58000 task.ti: ffff880028b58000 RIP: locks_lock_inode_wait+0x2e/0x160 Call Trace: ocfs2_do_flock+0x91/0x160 [ocfs2] ocfs2_flock+0x76/0xd0 [ocfs2] SyS_flock+0x10f/0x1a0 entry_SYSCALL_64_fastpath+0x12/0x71 Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 48 81 ec 88 00 00 00 8b 46 40 83 e0 03 83 f8 01 0f 84 ad 00 00 00 83 f8 02 74 04 <0f> 0b eb fe 4c 8d ad 60 ff ff ff 4c 8d 7b 58 e8 0e 8e 73 00 4d RIP locks_lock_inode_wait+0x2e/0x160 RSP ---[ end trace dfca74ec9b5b274c ]--- Fixes: 4f6563677ae8 ("Move locks API users to locks_lock_inode_wait()") Signed-off-by: Junxiao Bi Cc: Mark Fasheh Cc: Joel Becker Cc: Joseph Qi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/locks.c b/fs/ocfs2/locks.c index 652ece4..d56f007 100644 --- a/fs/ocfs2/locks.c +++ b/fs/ocfs2/locks.c @@ -67,7 +67,10 @@ static int ocfs2_do_flock(struct file *file, struct inode *inode, */ locks_lock_file_wait(file, - &(struct file_lock){.fl_type = F_UNLCK}); + &(struct file_lock) { + .fl_type = F_UNLCK, + .fl_flags = FL_FLOCK + }); ocfs2_file_unlock(file); } -- cgit v0.10.2 From 5f0f2887f4de9508dcf438deab28f1de8070c271 Mon Sep 17 00:00:00 2001 From: Andrew Banman Date: Tue, 29 Dec 2015 14:54:25 -0800 Subject: mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone() test_pages_in_a_zone() does not account for the possibility of missing sections in the given pfn range. pfn_valid_within always returns 1 when CONFIG_HOLES_IN_ZONE is not set, allowing invalid pfns from missing sections to pass the test, leading to a kernel oops. Wrap an additional pfn loop with PAGES_PER_SECTION granularity to check for missing sections before proceeding into the zone-check code. This also prevents a crash from offlining memory devices with missing sections. Despite this, it may be a good idea to keep the related patch '[PATCH 3/3] drivers: memory: prohibit offlining of memory blocks with missing sections' because missing sections in a memory block may lead to other problems not covered by the scope of this fix. Signed-off-by: Andrew Banman Acked-by: Alex Thorlton Cc: Russ Anderson Cc: Alex Thorlton Cc: Yinghai Lu Cc: Greg KH Cc: Seth Jennings Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 67d488a..a042a9d 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1375,23 +1375,30 @@ int is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages) */ int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn) { - unsigned long pfn; + unsigned long pfn, sec_end_pfn; struct zone *zone = NULL; struct page *page; int i; - for (pfn = start_pfn; + for (pfn = start_pfn, sec_end_pfn = SECTION_ALIGN_UP(start_pfn); pfn < end_pfn; - pfn += MAX_ORDER_NR_PAGES) { - i = 0; - /* This is just a CONFIG_HOLES_IN_ZONE check.*/ - while ((i < MAX_ORDER_NR_PAGES) && !pfn_valid_within(pfn + i)) - i++; - if (i == MAX_ORDER_NR_PAGES) + pfn = sec_end_pfn + 1, sec_end_pfn += PAGES_PER_SECTION) { + /* Make sure the memory section is present first */ + if (!present_section_nr(pfn_to_section_nr(pfn))) continue; - page = pfn_to_page(pfn + i); - if (zone && page_zone(page) != zone) - return 0; - zone = page_zone(page); + for (; pfn < sec_end_pfn && pfn < end_pfn; + pfn += MAX_ORDER_NR_PAGES) { + i = 0; + /* This is just a CONFIG_HOLES_IN_ZONE check.*/ + while ((i < MAX_ORDER_NR_PAGES) && + !pfn_valid_within(pfn + i)) + i++; + if (i == MAX_ORDER_NR_PAGES) + continue; + page = pfn_to_page(pfn + i); + if (zone && page_zone(page) != zone) + return 0; + zone = page_zone(page); + } } return 1; } -- cgit v0.10.2 From cc28d6d80f6ab494b10f0e2ec949eacd610f66e3 Mon Sep 17 00:00:00 2001 From: xuejiufei Date: Tue, 29 Dec 2015 14:54:29 -0800 Subject: ocfs2/dlm: clear migration_pending when migration target goes down We have found a BUG on res->migration_pending when migrating lock resources. The situation is as follows. dlm_mark_lockres_migration res->migration_pending = 1; __dlm_lockres_reserve_ast dlm_lockres_release_ast returns with res->migration_pending remains because other threads reserve asts wait dlm_migration_can_proceed returns 1 >>>>>>> o2hb found that target goes down and remove target from domain_map dlm_migration_can_proceed returns 1 dlm_mark_lockres_migrating returns -ESHOTDOWN with res->migration_pending still remains. When reentering dlm_mark_lockres_migrating(), it will trigger the BUG_ON with res->migration_pending. So clear migration_pending when target is down. Signed-off-by: Jiufei Xue Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index ce38b4c..84f2f80 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -2843,6 +2843,8 @@ again: res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY; if (!ret) BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING)); + else + res->migration_pending = 0; spin_unlock(&res->spinlock); /* -- cgit v0.10.2 From 6cdb18ad98a49f7e9b95d538a0614cde827404b8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 29 Dec 2015 14:54:32 -0800 Subject: mm/vmstat: fix overflow in mod_zone_page_state() mod_zone_page_state() takes a "delta" integer argument. delta contains the number of pages that should be added or subtracted from a struct zone's vm_stat field. If a zone is larger than 8TB this will cause overflows. E.g. for a zone with a size slightly larger than 8TB the line mod_zone_page_state(zone, NR_ALLOC_BATCH, zone->managed_pages); in mm/page_alloc.c:free_area_init_core() will result in a negative result for the NR_ALLOC_BATCH entry within the zone's vm_stat, since 8TB contain 0x8xxxxxxx pages which will be sign extended to a negative value. Fix this by changing the delta argument to long type. This could fix an early boot problem seen on s390, where we have a 9TB system with only one node. ZONE_DMA contains 2GB and ZONE_NORMAL the rest. The system is trying to allocate a GFP_DMA page but ZONE_DMA is completely empty, so it tries to reclaim pages in an endless loop. This was seen on a heavily patched 3.10 kernel. One possible explaination seem to be the overflows caused by mod_zone_page_state(). Unfortunately I did not have the chance to verify that this patch actually fixes the problem, since I don't have access to the system right now. However the overflow problem does exist anyway. Given the description that a system with slightly less than 8TB does work, this seems to be a candidate for the observed problem. Signed-off-by: Heiko Carstens Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 5dbc8b0..3e5d907 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -176,11 +176,11 @@ extern void zone_statistics(struct zone *, struct zone *, gfp_t gfp); #define sub_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, -(__d)) #ifdef CONFIG_SMP -void __mod_zone_page_state(struct zone *, enum zone_stat_item item, int); +void __mod_zone_page_state(struct zone *, enum zone_stat_item item, long); void __inc_zone_page_state(struct page *, enum zone_stat_item); void __dec_zone_page_state(struct page *, enum zone_stat_item); -void mod_zone_page_state(struct zone *, enum zone_stat_item, int); +void mod_zone_page_state(struct zone *, enum zone_stat_item, long); void inc_zone_page_state(struct page *, enum zone_stat_item); void dec_zone_page_state(struct page *, enum zone_stat_item); @@ -205,7 +205,7 @@ void set_pgdat_percpu_threshold(pg_data_t *pgdat, * The functions directly modify the zone and global counters. */ static inline void __mod_zone_page_state(struct zone *zone, - enum zone_stat_item item, int delta) + enum zone_stat_item item, long delta) { zone_page_state_add(delta, zone, item); } diff --git a/mm/vmstat.c b/mm/vmstat.c index 0d5712b..4ebc17d 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -219,7 +219,7 @@ void set_pgdat_percpu_threshold(pg_data_t *pgdat, * particular counter cannot be updated from interrupt context. */ void __mod_zone_page_state(struct zone *zone, enum zone_stat_item item, - int delta) + long delta) { struct per_cpu_pageset __percpu *pcp = zone->pageset; s8 __percpu *p = pcp->vm_stat_diff + item; @@ -318,8 +318,8 @@ EXPORT_SYMBOL(__dec_zone_page_state); * 1 Overstepping half of threshold * -1 Overstepping minus half of threshold */ -static inline void mod_state(struct zone *zone, - enum zone_stat_item item, int delta, int overstep_mode) +static inline void mod_state(struct zone *zone, enum zone_stat_item item, + long delta, int overstep_mode) { struct per_cpu_pageset __percpu *pcp = zone->pageset; s8 __percpu *p = pcp->vm_stat_diff + item; @@ -357,7 +357,7 @@ static inline void mod_state(struct zone *zone, } void mod_zone_page_state(struct zone *zone, enum zone_stat_item item, - int delta) + long delta) { mod_state(zone, item, delta, 0); } @@ -384,7 +384,7 @@ EXPORT_SYMBOL(dec_zone_page_state); * Use interrupt disable to serialize counter updates */ void mod_zone_page_state(struct zone *zone, enum zone_stat_item item, - int delta) + long delta) { unsigned long flags; -- cgit v0.10.2 From 574aab1e02837927e3c94193eedf94128ad10b6d Mon Sep 17 00:00:00 2001 From: Nicolai Stange Date: Tue, 29 Dec 2015 13:29:55 +0100 Subject: net, socket, socket_wq: fix missing initialization of flags Commit ceb5d58b2170 ("net: fix sock_wake_async() rcu protection") from the current 4.4 release cycle introduced a new flags member in struct socket_wq and moved SOCKWQ_ASYNC_NOSPACE and SOCKWQ_ASYNC_WAITDATA from struct socket's flags member into that new place. Unfortunately, the new flags field is never initialized properly, at least not for the struct socket_wq instance created in sock_alloc_inode(). One particular issue I encountered because of this is that my GNU Emacs failed to draw anything on my desktop -- i.e. what I got is a transparent window, including the title bar. Bisection lead to the commit mentioned above and further investigation by means of strace told me that Emacs is indeed speaking to my Xorg through an O_ASYNC AF_UNIX socket. This is reproducible 100% of times and the fact that properly initializing the struct socket_wq ->flags fixes the issue leads me to the conclusion that somehow SOCKWQ_ASYNC_WAITDATA got set in the uninitialized ->flags, preventing my Emacs from receiving any SIGIO's due to data becoming available and it got stuck. Make sock_alloc_inode() set the newly created struct socket_wq's ->flags member to zero. Fixes: ceb5d58b2170 ("net: fix sock_wake_async() rcu protection") Signed-off-by: Nicolai Stange Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/socket.c b/net/socket.c index 29822d6..d730ef9 100644 --- a/net/socket.c +++ b/net/socket.c @@ -257,6 +257,7 @@ static struct inode *sock_alloc_inode(struct super_block *sb) } init_waitqueue_head(&wq->wait); wq->fasync_list = NULL; + wq->flags = 0; RCU_INIT_POINTER(ei->socket.wq, wq); ei->socket.state = SS_UNCONNECTED; -- cgit v0.10.2 From 068d8bd338e855286aea54e70d1c101569284b21 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 29 Dec 2015 17:49:25 +0800 Subject: sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close In sctp_close, sctp_make_abort_user may return NULL because of memory allocation failure. If this happens, it will bypass any state change and never free the assoc. The assoc has no chance to be freed and it will be kept in memory with the state it had even after the socket is closed by sctp_close(). So if sctp_make_abort_user fails to allocate memory, we should abort the asoc via sctp_primitive_ABORT as well. Just like the annotation in sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said, "Even if we can't send the ABORT due to low memory delete the TCB. This is a departure from our typical NOMEM handling". But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would dereference the chunk pointer, and system crash. So we should add SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other places where it adds SCTP_CMD_REPLY cmd. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index cd34a4a..22c2bf3 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -4829,7 +4829,8 @@ sctp_disposition_t sctp_sf_do_9_1_prm_abort( retval = SCTP_DISPOSITION_CONSUME; - sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + if (abort) + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); /* Even if we can't send the ABORT due to low memory delete the * TCB. This is a departure from our typical NOMEM handling. @@ -4966,7 +4967,8 @@ sctp_disposition_t sctp_sf_cookie_wait_prm_abort( SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT)); retval = SCTP_DISPOSITION_CONSUME; - sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + if (abort) + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE, SCTP_STATE(SCTP_STATE_CLOSED)); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 529ed35..ef1d90f 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1516,8 +1516,7 @@ static void sctp_close(struct sock *sk, long timeout) struct sctp_chunk *chunk; chunk = sctp_make_abort_user(asoc, NULL, 0); - if (chunk) - sctp_primitive_ABORT(net, asoc, chunk); + sctp_primitive_ABORT(net, asoc, chunk); } else sctp_primitive_SHUTDOWN(net, asoc, NULL); } -- cgit v0.10.2 From 8b30ca73b7cc7f2177cfc4e8274d2ebdba328cd5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Dec 2015 15:18:02 -0500 Subject: sparc: Add all necessary direct socket system calls. The GLIBC folks would like to eliminate socketcall support eventually, and this makes sense regardless so wire them all up. Signed-off-by: David S. Miller diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h index f31a124..5655912 100644 --- a/arch/sparc/include/uapi/asm/unistd.h +++ b/arch/sparc/include/uapi/asm/unistd.h @@ -418,8 +418,11 @@ #define __NR_execveat 350 #define __NR_membarrier 351 #define __NR_userfaultfd 352 +#define __NR_bind 353 +#define __NR_listen 354 +#define __NR_setsockopt 355 -#define NR_syscalls 353 +#define NR_syscalls 356 /* Bitmask values returned from kern_features system call. */ #define KERN_FEATURE_MIXED_MODE_STACK 0x00000001 diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 78e8029..d557a25 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -35,18 +35,18 @@ sys_call_table: /*80*/ .long sys_setgroups16, sys_getpgrp, sys_setgroups, sys_setitimer, sys_ftruncate64 /*85*/ .long sys_swapon, sys_getitimer, sys_setuid, sys_sethostname, sys_setgid /*90*/ .long sys_dup2, sys_setfsuid, sys_fcntl, sys_select, sys_setfsgid -/*95*/ .long sys_fsync, sys_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall +/*95*/ .long sys_fsync, sys_setpriority, sys_socket, sys_connect, sys_accept /*100*/ .long sys_getpriority, sys_rt_sigreturn, sys_rt_sigaction, sys_rt_sigprocmask, sys_rt_sigpending /*105*/ .long sys_rt_sigtimedwait, sys_rt_sigqueueinfo, sys_rt_sigsuspend, sys_setresuid, sys_getresuid -/*110*/ .long sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall -/*115*/ .long sys_getgroups, sys_gettimeofday, sys_getrusage, sys_nis_syscall, sys_getcwd +/*110*/ .long sys_setresgid, sys_getresgid, sys_setregid, sys_recvmsg, sys_sendmsg +/*115*/ .long sys_getgroups, sys_gettimeofday, sys_getrusage, sys_getsockopt, sys_getcwd /*120*/ .long sys_readv, sys_writev, sys_settimeofday, sys_fchown16, sys_fchmod -/*125*/ .long sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate -/*130*/ .long sys_ftruncate, sys_flock, sys_lstat64, sys_nis_syscall, sys_nis_syscall -/*135*/ .long sys_nis_syscall, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64 -/*140*/ .long sys_sendfile64, sys_nis_syscall, sys_futex, sys_gettid, sys_getrlimit +/*125*/ .long sys_recvfrom, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate +/*130*/ .long sys_ftruncate, sys_flock, sys_lstat64, sys_sendto, sys_shutdown +/*135*/ .long sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64 +/*140*/ .long sys_sendfile64, sys_getpeername, sys_futex, sys_gettid, sys_getrlimit /*145*/ .long sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write -/*150*/ .long sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 +/*150*/ .long sys_getsockname, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 /*155*/ .long sys_fcntl64, sys_inotify_rm_watch, sys_statfs, sys_fstatfs, sys_oldumount /*160*/ .long sys_sched_setaffinity, sys_sched_getaffinity, sys_getdomainname, sys_setdomainname, sys_nis_syscall /*165*/ .long sys_quotactl, sys_set_tid_address, sys_mount, sys_ustat, sys_setxattr @@ -87,4 +87,5 @@ sys_call_table: /*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr /*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd +/*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen +/*355*/ .long sys_setsockopt diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 2549c2c..898684c 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -37,15 +37,15 @@ sys_call_table32: /*80*/ .word sys_setgroups16, sys_getpgrp, sys_setgroups, compat_sys_setitimer, sys32_ftruncate64 .word sys_swapon, compat_sys_getitimer, sys_setuid, sys_sethostname, sys_setgid /*90*/ .word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid - .word sys_fsync, sys_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall + .word sys_fsync, sys_setpriority, sys_socket, sys_connect, sys_accept /*100*/ .word sys_getpriority, sys32_rt_sigreturn, compat_sys_rt_sigaction, compat_sys_rt_sigprocmask, compat_sys_rt_sigpending .word compat_sys_rt_sigtimedwait, compat_sys_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid -/*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall - .word sys_getgroups, compat_sys_gettimeofday, compat_sys_getrusage, sys_nis_syscall, sys_getcwd +/*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, compat_sys_recvmsg, compat_sys_sendmsg + .word sys_getgroups, compat_sys_gettimeofday, compat_sys_getrusage, compat_sys_getsockopt, sys_getcwd /*120*/ .word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod - .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, compat_sys_truncate -/*130*/ .word compat_sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall - .word sys_nis_syscall, sys_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64 + .word sys_recvfrom, sys_setreuid16, sys_setregid16, sys_rename, compat_sys_truncate +/*130*/ .word compat_sys_ftruncate, sys_flock, compat_sys_lstat64, sys_sendto, sys_shutdown + .word sys_socketpair, sys_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64 /*140*/ .word sys_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit .word compat_sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write /*150*/ .word sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 @@ -88,7 +88,8 @@ sys_call_table32: .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd +/*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen + .word compat_sys_setsockopt #endif /* CONFIG_COMPAT */ @@ -168,4 +169,5 @@ sys_call_table: .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd +/*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen + .word sys_setsockopt -- cgit v0.10.2 From 42d85c52f88dd0d2159f531eb33cc66d6e3e60c0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Dec 2015 15:38:56 -0500 Subject: sparc: Wire up mlock2 system call. Signed-off-by: David S. Miller diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h index 5655912..1c26d44 100644 --- a/arch/sparc/include/uapi/asm/unistd.h +++ b/arch/sparc/include/uapi/asm/unistd.h @@ -421,8 +421,9 @@ #define __NR_bind 353 #define __NR_listen 354 #define __NR_setsockopt 355 +#define __NR_mlock2 356 -#define NR_syscalls 356 +#define NR_syscalls 357 /* Bitmask values returned from kern_features system call. */ #define KERN_FEATURE_MIXED_MODE_STACK 0x00000001 diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index d557a25..e663b6c 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -88,4 +88,4 @@ sys_call_table: /*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr /*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf /*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen -/*355*/ .long sys_setsockopt +/*355*/ .long sys_setsockopt, sys_mlock2 diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 898684c..1557121 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -89,7 +89,7 @@ sys_call_table32: /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf /*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen - .word compat_sys_setsockopt + .word compat_sys_setsockopt, sys_mlock2 #endif /* CONFIG_COMPAT */ @@ -170,4 +170,4 @@ sys_call_table: /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf /*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen - .word sys_setsockopt + .word sys_setsockopt, sys_mlock2 -- cgit v0.10.2