From 74cedd30522819d87131715ca0e7d041748b2721 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Mon, 12 Oct 2015 21:54:43 +0100 Subject: i2c: return probe deferred status on dev_pm_domain_attach A change of return status was introduced in commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") The commit prevents the defer status being passed up the call stack appropriately when dev_pm_domain_attach returns -EPROBE_DEFER. Catch the PROBE_DEFER and clear up the IRQ wakeup status Signed-off-by: Kieran Bingham Fixes: 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") Reviewed-by: Dmitry Torokhov Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 5f89f1e..a59c311 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -694,12 +694,12 @@ static int i2c_device_probe(struct device *dev) goto err_clear_wakeup_irq; status = dev_pm_domain_attach(&client->dev, true); - if (status != -EPROBE_DEFER) { - status = driver->probe(client, i2c_match_id(driver->id_table, - client)); - if (status) - goto err_detach_pm_domain; - } + if (status == -EPROBE_DEFER) + goto err_clear_wakeup_irq; + + status = driver->probe(client, i2c_match_id(driver->id_table, client)); + if (status) + goto err_detach_pm_domain; return 0; -- cgit v0.10.2 From 4f7effddf4549d57114289f273710f077c4c330a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 9 Oct 2015 10:39:25 +0100 Subject: i2c: rcar: enable RuntimePM before registering to the core The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Reported-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index d8361da..d8b5a8f 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -690,15 +690,16 @@ static int rcar_i2c_probe(struct platform_device *pdev) return ret; } + pm_runtime_enable(dev); + platform_set_drvdata(pdev, priv); + ret = i2c_add_numbered_adapter(adap); if (ret < 0) { dev_err(dev, "reg adap failed: %d\n", ret); + pm_runtime_disable(dev); return ret; } - pm_runtime_enable(dev); - platform_set_drvdata(pdev, priv); - dev_info(dev, "probed\n"); return 0; -- cgit v0.10.2 From eadd709f5d2e8aebb1b7bf49460e97a68d81a9b0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 10 Oct 2015 08:24:23 +0100 Subject: i2c: s3c2410: enable RuntimePM before registering to the core The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Signed-off-by: Wolfram Sang Tested-by: Krzysztof Kozlowski Acked-by: Kukjin Kim Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 50bfd8c..5df8196 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -1243,17 +1243,19 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->adap.nr = i2c->pdata->bus_num; i2c->adap.dev.of_node = pdev->dev.of_node; + platform_set_drvdata(pdev, i2c); + + pm_runtime_enable(&pdev->dev); + ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { dev_err(&pdev->dev, "failed to add bus to i2c core\n"); + pm_runtime_disable(&pdev->dev); s3c24xx_i2c_deregister_cpufreq(i2c); clk_unprepare(i2c->clk); return ret; } - platform_set_drvdata(pdev, i2c); - - pm_runtime_enable(&pdev->dev); pm_runtime_enable(&i2c->adap.dev); dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev)); -- cgit v0.10.2 From 36d48fb5766aee9717e429f772046696b215282d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 9 Oct 2015 10:39:24 +0100 Subject: i2c: designware-platdrv: enable RuntimePM before registering to the core The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Acked-by: Mika Westerberg Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 3dd2de3..73d5841 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -253,12 +253,6 @@ static int dw_i2c_probe(struct platform_device *pdev) adap->dev.parent = &pdev->dev; adap->dev.of_node = pdev->dev.of_node; - r = i2c_add_numbered_adapter(adap); - if (r) { - dev_err(&pdev->dev, "failure adding adapter\n"); - return r; - } - if (dev->pm_runtime_disabled) { pm_runtime_forbid(&pdev->dev); } else { @@ -268,6 +262,13 @@ static int dw_i2c_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); } + r = i2c_add_numbered_adapter(adap); + if (r) { + dev_err(&pdev->dev, "failure adding adapter\n"); + pm_runtime_disable(&pdev->dev); + return r; + } + return 0; } -- cgit v0.10.2 From fc531d9848a06e96280e60e4a5b5168de3ad5c3d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 15 Oct 2015 15:50:15 +0200 Subject: MAINTAINERS: add maintainers for Synopsis Designware I2C drivers Those guys already have been helpful in the past and are actively working on this driver, unlike me. Signed-off-by: Wolfram Sang Acked-by: Jarkko Nikula Acked-by: Andy Shevchenko Acked-by: Mika Westerberg diff --git a/MAINTAINERS b/MAINTAINERS index 5f46784..58d6b02 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9101,6 +9101,15 @@ S: Supported F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt F: drivers/net/ethernet/synopsys/dwc_eth_qos.c +SYNOPSYS DESIGNWARE I2C DRIVER +M: Andy Shevchenko +M: Jarkko Nikula +M: Mika Westerberg +L: linux-i2c@vger.kernel.org +S: Maintained +F: drivers/i2c/busses/i2c-designware-* +F: include/linux/platform_data/i2c-designware.h + SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER M: Seungwon Jeon M: Jaehoon Chung -- cgit v0.10.2 From 56d4b8a24cef5d66f0d10ac778a520d3c2c68a48 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 24 Sep 2015 12:06:54 +0300 Subject: i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by: Pavel Roskin Signed-off-by: Mika Westerberg Tested-by: Pavel Roskin Signed-off-by: Wolfram Sang Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 73d5841..472b882 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -51,6 +52,22 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) } #ifdef CONFIG_ACPI +/* + * The HCNT/LCNT information coming from ACPI should be the most accurate + * for given platform. However, some systems get it wrong. On such systems + * we get better results by calculating those based on the input clock. + */ +static const struct dmi_system_id dw_i2c_no_acpi_params[] = { + { + .ident = "Dell Inspiron 7348", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"), + }, + }, + { } +}; + static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], u16 *hcnt, u16 *lcnt, u32 *sda_hold) { @@ -58,6 +75,9 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], acpi_handle handle = ACPI_HANDLE(&pdev->dev); union acpi_object *obj; + if (dmi_check_system(dw_i2c_no_acpi_params)) + return; + if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf))) return; -- cgit v0.10.2