From 09659fa72bf638ae986b8b80cf99309768dd0b32 Mon Sep 17 00:00:00 2001 From: Vishwanath BS Date: Fri, 22 Jun 2012 08:40:02 -0600 Subject: ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file Since IO Daisychain modifies only PRM registers, it makes sense to move it to PRM File. Also changed the timeout value for IO chain enable to 100us and added a wait for status disable at the end. Thanks to Nishanth Menon for contributing a fix to the timeout code waiting for WUCLKOUT to go high. Signed-off-by: Vishwanath BS Signed-off-by: Tero Kristo Cc: Nishanth Menon Reviewed-by: Rajendra Nayak [paul@pwsan.com: renamed omap3_trigger_io_chain() to better describe the end result and to match other PRM functions; removed omap3_disable_io_chain(); moved MAX_IOPAD_LATCH_TIME to prcm-common as it will also be used by the OMAP4 code; removed unnecessary barrier; added kerneldoc; added credit for fix from Nishanth] Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 6d7f0d8..9d6cb7c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -72,34 +72,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; static struct powerdomain *cam_pwrdm; -static void omap3_enable_io_chain(void) -{ - int timeout = 0; - - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - /* Do a readback to assure write has been done */ - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - - while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & - OMAP3430_ST_IO_CHAIN_MASK)) { - timeout++; - if (timeout > 1000) { - pr_err("Wake up daisy chain activation failed.\n"); - return; - } - } - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - -} - -static void omap3_disable_io_chain(void) -{ - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); -} - static void omap3_core_save_context(void) { omap3_ctrl_save_padconf(); @@ -305,7 +277,7 @@ void omap_sram_idle(void) core_next_state < PWRDM_POWER_ON)) { omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); if (omap3_has_io_chain_ctrl()) - omap3_enable_io_chain(); + omap3xxx_prm_reconfigure_io_chain(); } pwrdm_pre_transition(); @@ -382,12 +354,9 @@ void omap_sram_idle(void) /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { + core_next_state < PWRDM_POWER_ON)) omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); - if (omap3_has_io_chain_ctrl()) - omap3_disable_io_chain(); - } clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 6da3ba4..fca23cb 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -410,6 +410,14 @@ */ #define MAX_MODULE_HARDRESET_WAIT 10000 +/* + * Maximum time(us) it takes to output the signal WUCLKOUT of the last + * pad of the I/O ring after asserting WUCLKIN high. Tero measured + * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4 + * microseconds on OMAP4, so this timeout may be too high. + */ +#define MAX_IOPAD_LATCH_TIME 100 + # ifndef __ASSEMBLER__ extern void __iomem *prm_base; extern void __iomem *cm_base; diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce7654..7d62bd6 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -301,6 +301,37 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) OMAP3_PRM_IRQENABLE_MPU_OFFSET); } +/** + * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No + * return value. + */ +void omap3xxx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN_MASK, + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, + PM_WKST); + + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); +} + static int __init omap3xxx_prcm_init(void) { if (cpu_is_omap34xx()) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 491c72d..a8c946f 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -317,6 +317,8 @@ extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); +extern void omap3xxx_prm_reconfigure_io_chain(void); + /* PRM interrupt-related functions */ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); extern void omap3xxx_prm_ocp_barrier(void); -- cgit v0.10.2