From 079a176d87a4da4cb18864c54d3932131e11e229 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Sep 2010 17:31:29 +0900 Subject: spi: omap2_mcspi: make use of dev_vdbg() dev_vdbg() is only compiled when VERBOSE is defined, so there's no need to wrap dev_dbg() on #ifdef VERBOSE .. #endif as we can use dev_vdbg() directly. Signed-off-by: Felipe Balbi Signed-off-by: Grant Likely diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index b3a94ca..d703927 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -489,10 +489,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %02x\n", + dev_vdbg(&spi->dev, "write-%d %02x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -506,10 +504,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %02x\n", + dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -522,10 +518,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %02x\n", + dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); -#endif } } while (c); } else if (word_len <= 16) { @@ -542,10 +536,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %04x\n", + dev_vdbg(&spi->dev, "write-%d %04x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -559,10 +551,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -575,10 +565,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); -#endif } } while (c); } else if (word_len <= 32) { @@ -595,10 +583,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %08x\n", + dev_vdbg(&spi->dev, "write-%d %08x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -612,10 +598,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %08x\n", + dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -628,10 +612,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %08x\n", + dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); -#endif } } while (c); } -- cgit v0.10.2 From e447d3588e1c5944f607083cb509663f8015d420 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 29 Sep 2010 17:31:29 +0900 Subject: spi/orion: Drop unnecessary null test list_for_each_entry binds its first argument to a non-null value, and thus any null test on the value of that argument is superfluous. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ iterator I; expression x,E; @@ I(x,...) { <... - (x != NULL) && E ...> } // Signed-off-by: Julia Lawall Signed-off-by: Grant Likely diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c index 3aea50d..0b677dc 100644 --- a/drivers/spi/orion_spi.c +++ b/drivers/spi/orion_spi.c @@ -404,7 +404,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) goto msg_rejected; } - if ((t != NULL) && t->bits_per_word) + if (t->bits_per_word) bits_per_word = t->bits_per_word; if ((bits_per_word != 8) && (bits_per_word != 16)) { @@ -415,7 +415,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) goto msg_rejected; } /*make sure buffer length is even when working in 16 bit mode*/ - if ((t != NULL) && (t->bits_per_word == 16) && (t->len & 1)) { + if ((t->bits_per_word == 16) && (t->len & 1)) { dev_err(&spi->dev, "message rejected : " "odd data length (%d) while in 16 bit mode\n", -- cgit v0.10.2 From 4a4fd47155ac49b62de5177a780c245e967752f3 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 29 Sep 2010 17:31:30 +0900 Subject: spi/amba-pl022: Fix error case return statement. The return -EINVAL appears to only make sense if the if branch that it is aligned with is taken, and the indentation indicates that this is the authors intent, so move it into that branch. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // Signed-off-by: Julia Lawall Signed-off-by: Grant Likely diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 4c37c4e2..8cdddc9 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1350,10 +1350,11 @@ static int verify_controller_parameters(struct pl022 *pl022, if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) && (chip_info->duplex != - SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) + SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { dev_err(chip_info->dev, "Microwire duplex mode is configured incorrectly\n"); return -EINVAL; + } } else { if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) dev_err(chip_info->dev, -- cgit v0.10.2 From e02ddd442a532c73e547ae3735c8012e3bd719a5 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 29 Sep 2010 17:31:31 +0900 Subject: spi/s3c64xx: Prevent unnecessary map-unmap Since we use DMA mode only for xfers bigger than FIFO size, do not map/unmap buffers for polling mode transfers. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index c3038da..e7b893f 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -499,6 +499,7 @@ static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, struct spi_message *msg) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct device *dev = &sdd->pdev->dev; struct spi_transfer *xfer; @@ -514,6 +515,9 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, /* Map until end or first fail */ list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + continue; + if (xfer->tx_buf != NULL) { xfer->tx_dma = dma_map_single(dev, (void *)xfer->tx_buf, xfer->len, @@ -545,6 +549,7 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, struct spi_message *msg) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct device *dev = &sdd->pdev->dev; struct spi_transfer *xfer; @@ -553,6 +558,9 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + continue; + if (xfer->rx_buf != NULL && xfer->rx_dma != XFER_DMAADDR_INVALID) dma_unmap_single(dev, xfer->rx_dma, -- cgit v0.10.2 From b42a81ca0fa7b3b442a0731ffc4e7db44464b5f2 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 29 Sep 2010 17:31:33 +0900 Subject: spi/s3c64xx: Consider the clk_from_cmu flag Newer SoCs have the SPI clock scaling control in platform's clock management unit. Inorder for such SoCs to work, we need to check the flag clk_from_cmu before making any clock changes. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index e5aba8f..b226f740 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -32,6 +32,8 @@ struct s3c64xx_spi_csinfo { * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. * @src_clk_name: Platform name of the corresponding clock. + * @clk_from_cmu: If the SPI clock/prescalar control block is present + * by the platform's clock-management-unit and not in SPI controller. * @num_cs: Number of CS this controller emulates. * @cfg_gpio: Configure pins for this SPI controller. * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 @@ -41,6 +43,7 @@ struct s3c64xx_spi_csinfo { struct s3c64xx_spi_info { int src_clk_nr; char *src_clk_name; + bool clk_from_cmu; int num_cs; diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index e7b893f..9e0aa3c 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -399,13 +399,18 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 val; /* Disable Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val &= ~S3C64XX_SPI_ENCLK_ENABLE; - writel(val, regs + S3C64XX_SPI_CLK_CFG); + if (sci->clk_from_cmu) { + clk_disable(sdd->src_clk); + } else { + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } /* Set Polarity and Phase */ val = readl(regs + S3C64XX_SPI_CH_CFG); @@ -441,17 +446,25 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) writel(val, regs + S3C64XX_SPI_MODE_CFG); - /* Configure Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val &= ~S3C64XX_SPI_PSR_MASK; - val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) - & S3C64XX_SPI_PSR_MASK); - writel(val, regs + S3C64XX_SPI_CLK_CFG); - - /* Enable Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val |= S3C64XX_SPI_ENCLK_ENABLE; - writel(val, regs + S3C64XX_SPI_CLK_CFG); + if (sci->clk_from_cmu) { + /* Configure Clock */ + /* There is half-multiplier before the SPI */ + clk_set_rate(sdd->src_clk, sdd->cur_speed * 2); + /* Enable Clock */ + clk_enable(sdd->src_clk); + } else { + /* Configure Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_PSR_MASK; + val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) + & S3C64XX_SPI_PSR_MASK); + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Enable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val |= S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } } static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, @@ -806,7 +819,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi) struct s3c64xx_spi_driver_data *sdd; struct s3c64xx_spi_info *sci; struct spi_message *msg; - u32 psr, speed; unsigned long flags; int err = 0; @@ -849,32 +861,37 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } /* Check if we can provide the requested rate */ - speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); /* Max possible */ - - if (spi->max_speed_hz > speed) - spi->max_speed_hz = speed; - - psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; - psr &= S3C64XX_SPI_PSR_MASK; - if (psr == S3C64XX_SPI_PSR_MASK) - psr--; + if (!sci->clk_from_cmu) { + u32 psr, speed; + + /* Max possible */ + speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); + + if (spi->max_speed_hz > speed) + spi->max_speed_hz = speed; + + psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; + psr &= S3C64XX_SPI_PSR_MASK; + if (psr == S3C64XX_SPI_PSR_MASK) + psr--; + + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz < speed) { + if (psr+1 < S3C64XX_SPI_PSR_MASK) { + psr++; + } else { + err = -EINVAL; + goto setup_exit; + } + } - speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); - if (spi->max_speed_hz < speed) { - if (psr+1 < S3C64XX_SPI_PSR_MASK) { - psr++; - } else { + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz >= speed) + spi->max_speed_hz = speed; + else err = -EINVAL; - goto setup_exit; - } } - speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); - if (spi->max_speed_hz >= speed) - spi->max_speed_hz = speed; - else - err = -EINVAL; - setup_exit: /* setup() returns with device de-selected */ @@ -896,7 +913,8 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) /* Disable Interrupts - we use Polling if not DMA mode */ writel(0, regs + S3C64XX_SPI_INT_EN); - writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, + if (!sci->clk_from_cmu) + writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, regs + S3C64XX_SPI_CLK_CFG); writel(0, regs + S3C64XX_SPI_MODE_CFG); writel(0, regs + S3C64XX_SPI_PACKET_CNT); -- cgit v0.10.2 From 0c92ecf10d9fb80b1798d2a9adfdea17f8f5e6d9 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 29 Sep 2010 17:31:33 +0900 Subject: spi/s3c64xx: Correction for 16,32 bits bus width We can't do without setting channel and bus width to same size. In order to do that, use loop read/writes in polling mode and appropriate burst size in DMA mode. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 9e0aa3c..795828b 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -261,15 +261,25 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - s3c2410_dma_config(sdd->tx_dmach, 1); + s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8); s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, xfer->tx_dma, xfer->len); s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); } else { - unsigned char *buf = (unsigned char *) xfer->tx_buf; - int i = 0; - while (i < xfer->len) - writeb(buf[i++], regs + S3C64XX_SPI_TX_DATA); + switch (sdd->cur_bpw) { + case 32: + iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 4); + break; + case 16: + iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 2); + break; + default: + iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len); + break; + } } } @@ -286,7 +296,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - s3c2410_dma_config(sdd->rx_dmach, 1); + s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8); s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, xfer->rx_dma, xfer->len); s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); @@ -366,20 +376,26 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, return -EIO; } } else { - unsigned char *buf; - int i; - /* If it was only Tx */ if (xfer->rx_buf == NULL) { sdd->state &= ~TXBUSY; return 0; } - i = 0; - buf = xfer->rx_buf; - while (i < xfer->len) - buf[i++] = readb(regs + S3C64XX_SPI_RX_DATA); - + switch (sdd->cur_bpw) { + case 32: + ioread32_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len / 4); + break; + case 16: + ioread16_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len / 2); + break; + default: + ioread8_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len); + break; + } sdd->state &= ~RXBUSY; } @@ -434,15 +450,17 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) switch (sdd->cur_bpw) { case 32: val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_WORD; break; case 16: val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD; break; default: val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; + val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; break; } - val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; /* Always 8bits wide */ writel(val, regs + S3C64XX_SPI_MODE_CFG); @@ -629,6 +647,14 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, bpw = xfer->bits_per_word ? : spi->bits_per_word; speed = xfer->speed_hz ? : spi->max_speed_hz; + if (xfer->len % (bpw / 8)) { + dev_err(&spi->dev, + "Xfer length(%u) not a multiple of word size(%u)\n", + xfer->len, bpw / 8); + status = -EIO; + goto out; + } + if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { sdd->cur_bpw = bpw; sdd->cur_speed = speed; -- cgit v0.10.2 From e8b17b5b3f30252b5470dbbf54bc251ddc7fac17 Mon Sep 17 00:00:00 2001 From: Masayuki Ohtake Date: Fri, 8 Oct 2010 12:44:49 -0600 Subject: spi/topcliff: Add topcliff platform controller hub (PCH) spi bus driver Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. This patch adds a driver for the SPI bus integrated into the Topcliff device. Signed-off-by: Masayuki Ohtake Signed-off-by: Grant Likely diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 91c2f4f..b32167a 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -298,6 +298,14 @@ config SPI_STMP3XXX help SPI driver for Freescale STMP37xx/378x SoC SSP interface +config SPI_TOPCLIFF_PCH + tristate "PCH SPI Controller" + depends on PCI + help + This driver is for PCH(Platform controller Hub) SPI of Topcliff which + is an IOH(Input/Output Hub) for x86 embedded processor. + This driver can access PCH SPI bus device. + config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" depends on GENERIC_GPIO && CPU_TX49XX diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index e9cbd18..65a232d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o +obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c new file mode 100644 index 0000000..58b183f --- /dev/null +++ b/drivers/spi/spi_topcliff_pch.c @@ -0,0 +1,1529 @@ +/* + * SPI bus driver for the Topcliff PCH used by Intel SoCs + */ + +/* + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register offsets */ +#define PCH_SPCR 0x00 /* SPI control register */ +#define PCH_SPBRR 0x04 /* SPI baud rate register */ +#define PCH_SPSR 0x08 /* SPI status register */ +#define PCH_SPDWR 0x0C /* SPI write data register */ +#define PCH_SPDRR 0x10 /* SPI read data register */ +#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */ +#define PCH_SRST 0x1C /* SPI reset register */ + +#define PCH_SPSR_TFD 0x000007C0 +#define PCH_SPSR_RFD 0x0000F800 + +#define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11) +#define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6) + +#define PCH_RX_THOLD 7 +#define PCH_RX_THOLD_MAX 15 +#define PCH_RX 1 +#define PCH_TX 2 + +/* various interrupts */ +#define PCH_TFI 0x1 +#define PCH_RFI 0x2 +#define PCH_FI 0x4 +#define PCH_ORI 0x8 +#define PCH_MDFI 0x10 + +#define PCH_ALL (PCH_TFI|PCH_RFI|PCH_FI|PCH_ORI|PCH_MDFI) +#define PCH_MAX_BAUDRATE 5000000 +#define PCH_MAX_FIFO_DEPTH 16 + +#define STATUS_RUNNING 1 +#define STATUS_EXITING 2 +#define PCH_SLEEP_TIME 10 + +#define PCH_ADDRESS_SIZE 0x20 + +#define SSN_LOW 0x02U +#define SSN_NO_CONTROL 0x00U +#define PCH_MAX_CS 0xFF +#define PCI_DEVICE_ID_GE_SPI 0x8816 + +#define SPCR_SPE_BIT (1 << 0) +#define SPCR_MSTR_BIT (1 << 1) +#define SPCR_LSBF_BIT (1 << 4) +#define SPCR_CPHA_BIT (1 << 5) +#define SPCR_CPOL_BIT (1 << 6) +#define SPCR_TFIE_BIT (1 << 8) +#define SPCR_RFIE_BIT (1 << 9) +#define SPCR_FIE_BIT (1 << 10) +#define SPCR_ORIE_BIT (1 << 11) +#define SPCR_MDFIE_BIT (1 << 12) +#define SPCR_FICLR_BIT (1 << 24) +#define SPSR_TFI_BIT (1 << 0) +#define SPSR_RFI_BIT (1 << 1) +#define SPSR_FI_BIT (1 << 2) +#define SPBRR_SIZE_BIT (1 << 10) + +#define SPCR_RFIC_FIELD 20 +#define SPCR_TFIC_FIELD 16 + +#define SPSR_INT_BITS 0x1F +#define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1)) +#define MASK_RFIC_SPCR_BITS (~(0xf << 20)) +#define MASK_TFIC_SPCR_BITS (~(0xf000f << 12)) + +#define PCH_CLOCK_HZ 50000000 +#define PCH_MAX_SPBR 1023 + + +/** + * struct pch_spi_data - Holds the SPI channel specific details + * @io_remap_addr: The remapped PCI base address + * @master: Pointer to the SPI master structure + * @work: Reference to work queue handler + * @wk: Workqueue for carrying out execution of the + * requests + * @wait: Wait queue for waking up upon receiving an + * interrupt. + * @transfer_complete: Status of SPI Transfer + * @bcurrent_msg_processing: Status flag for message processing + * @lock: Lock for protecting this structure + * @queue: SPI Message queue + * @status: Status of the SPI driver + * @bpw_len: Length of data to be transferred in bits per + * word + * @transfer_active: Flag showing active transfer + * @tx_index: Transmit data count; for bookkeeping during + * transfer + * @rx_index: Receive data count; for bookkeeping during + * transfer + * @tx_buff: Buffer for data to be transmitted + * @rx_index: Buffer for Received data + * @n_curnt_chip: The chip number that this SPI driver currently + * operates on + * @current_chip: Reference to the current chip that this SPI + * driver currently operates on + * @current_msg: The current message that this SPI driver is + * handling + * @cur_trans: The current transfer that this SPI driver is + * handling + * @board_dat: Reference to the SPI device data structure + */ +struct pch_spi_data { + void __iomem *io_remap_addr; + struct spi_master *master; + struct work_struct work; + struct workqueue_struct *wk; + wait_queue_head_t wait; + u8 transfer_complete; + u8 bcurrent_msg_processing; + spinlock_t lock; + struct list_head queue; + u8 status; + u32 bpw_len; + u8 transfer_active; + u32 tx_index; + u32 rx_index; + u16 *pkt_tx_buff; + u16 *pkt_rx_buff; + u8 n_curnt_chip; + struct spi_device *current_chip; + struct spi_message *current_msg; + struct spi_transfer *cur_trans; + struct pch_spi_board_data *board_dat; +}; + +/** + * struct pch_spi_board_data - Holds the SPI device specific details + * @pdev: Pointer to the PCI device + * @irq_reg_sts: Status of IRQ registration + * @pci_req_sts: Status of pci_request_regions + * @suspend_sts: Status of suspend + * @data: Pointer to SPI channel data structure + */ +struct pch_spi_board_data { + struct pci_dev *pdev; + u8 irq_reg_sts; + u8 pci_req_sts; + u8 suspend_sts; + struct pch_spi_data *data; +}; + +static struct pci_device_id pch_spi_pcidev_id[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_GE_SPI)}, + {0,} +}; + +static inline void pch_set_bitmsk(u32 *var, u32 bitmask) +{ + *var |= bitmask; +} + +static inline void pch_clr_bitmsk(u32 *var, u32 bitmask) +{ + *var &= (~(bitmask)); +} + +/** + * pch_spi_writereg() - Performs register writes + * @master: Pointer to struct spi_master. + * @idx: Register offset. + * @val: Value to be written to register. + */ +static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val) +{ + + struct pch_spi_data *data = spi_master_get_devdata(master); + + iowrite32(val, (data->io_remap_addr + idx)); +} + +/** + * pch_spi_readreg() - Performs register reads + * @master: Pointer to struct spi_master. + * @idx: Register offset. + */ +static inline u32 pch_spi_readreg(struct spi_master *master, int idx) +{ + struct pch_spi_data *data = spi_master_get_devdata(master); + + return ioread32(data->io_remap_addr + idx); +} + +/* ope==true:Set bit, ope==false:Clear bit */ +static inline void pch_spi_setclr_bit(u32 *val, u32 pos, bool ope) +{ + if (ope) + *val |= pos; + else + *val &= (~(pos)); +} + +static inline void pch_spi_setclr_reg(struct spi_master *master, int idx, + u32 set, u32 clr) +{ + u32 tmp = pch_spi_readreg(master, idx); + tmp = (tmp & ~clr) | set; + pch_spi_writereg(master, idx, tmp); +} + + +static void pch_spi_set_master_mode(struct spi_master *master) +{ + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0); +} + +/** + * pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs + * @master: Pointer to struct spi_master. + */ +static void pch_spi_clear_fifo(struct spi_master *master) +{ + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0); + pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT); +} + +/** + * ch_spi_disable_interrupts() - Disables specified interrupts + * @master: Pointer to struct spi_master. + * @interrupt: Interrups to be enabled. + */ +static void pch_spi_disable_interrupts(struct spi_master *master, u8 interrupt) +{ + u32 clr_flags = 0; + + if (interrupt & PCH_RFI) + clr_flags |= SPCR_RFIE_BIT; + + if (interrupt & PCH_TFI) + clr_flags |= SPCR_TFIE_BIT; + + if (interrupt & PCH_FI) + clr_flags |= SPCR_FIE_BIT; + + if (interrupt & PCH_ORI) + clr_flags |= SPCR_ORIE_BIT; + + if (interrupt & PCH_MDFI) + clr_flags |= SPCR_MDFIE_BIT; + + pch_spi_setclr_reg(master, PCH_SPCR, 0, clr_flags); + + dev_dbg(&master->dev, "%s clearing bits =%x\n", __func__, clr_flags); +} + +static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, + void __iomem *io_remap_addr) +{ + u32 n_read, tx_index, rx_index, bpw_len; + u16 *pkt_rx_buffer, *pkt_tx_buff; + int read_cnt; + u32 reg_spcr_val; + void __iomem *spsr; + void __iomem *spdrr; + void __iomem *spdwr; + + spsr = io_remap_addr + PCH_SPSR; + iowrite32(reg_spsr_val, spsr); + + if (data->transfer_active) { + rx_index = data->rx_index; + tx_index = data->tx_index; + bpw_len = data->bpw_len; + pkt_rx_buffer = data->pkt_rx_buff; + pkt_tx_buff = data->pkt_tx_buff; + + spdrr = io_remap_addr + PCH_SPDRR; + spdwr = io_remap_addr + PCH_SPDWR; + + n_read = PCH_READABLE(reg_spsr_val); + + for (read_cnt = 0; (read_cnt < n_read); read_cnt++) { + pkt_rx_buffer[rx_index++] = ioread32(spdrr); + if (tx_index < bpw_len) + iowrite32(pkt_tx_buff[tx_index++], spdwr); + } + + /* disable RFI if not needed */ + if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) { + reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR); + + /* disable RFI */ + pch_clr_bitmsk(®_spcr_val, SPCR_RFIE_BIT); + + /* reset rx threshold */ + reg_spcr_val &= MASK_RFIC_SPCR_BITS; + reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD); + iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))), + (io_remap_addr + PCH_SPCR)); + } + + /* update counts */ + data->tx_index = tx_index; + data->rx_index = rx_index; + + } + + /* if transfer complete interrupt */ + if (reg_spsr_val & SPSR_FI_BIT) { + /* disable FI & RFI interrupts */ + pch_spi_disable_interrupts(data->master, PCH_FI | PCH_RFI); + + /* transfer is completed;inform pch_spi_process_messages */ + data->transfer_complete = true; + wake_up(&data->wait); + } +} + + +/** + * pch_spi_handler() - Interrupt handler + * @irq: The interrupt number. + * @dev_id: Pointer to struct pch_spi_board_data. + */ +static irqreturn_t pch_spi_handler(int irq, void *dev_id) +{ + u32 reg_spsr_val; + struct pch_spi_data *data; + void __iomem *spsr; + void __iomem *io_remap_addr; + irqreturn_t ret = IRQ_NONE; + + struct pch_spi_board_data *board_dat = dev_id; + + if (board_dat->suspend_sts) { + dev_dbg(&board_dat->pdev->dev, + "%s returning due to suspend\n", __func__); + return IRQ_NONE; + } + + data = board_dat->data; + io_remap_addr = data->io_remap_addr; + spsr = io_remap_addr + PCH_SPSR; + + reg_spsr_val = ioread32(spsr); + + /* Check if the interrupt is for SPI device */ + + if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) { + pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr); + ret = IRQ_HANDLED; + } + + dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n", + __func__, ret); + + return ret; +} + +/** + * pch_spi_set_baud_rate() - Sets SPBR field in SPBRR + * @master: Pointer to struct spi_master. + * @speed_hz: Baud rate. + */ +static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz) +{ + u32 n_spbr; + + n_spbr = PCH_CLOCK_HZ / (speed_hz * 2); + + /* if baud rate is less than we can support limit it */ + + if (n_spbr > PCH_MAX_SPBR) + n_spbr = PCH_MAX_SPBR; + + pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS); +} + +/** + * pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR + * @master: Pointer to struct spi_master. + * @bits_per_word: Bits per word for SPI transfer. + */ +static void pch_spi_set_bits_per_word(struct spi_master *master, + u8 bits_per_word) +{ + if (bits_per_word == 8) + pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT); + else + pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0); +} + +/** + * pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer + * @spi: Pointer to struct spi_device. + */ +static void pch_spi_setup_transfer(struct spi_device *spi) +{ + u32 reg_spcr_val; + + dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n", + __func__, pch_spi_readreg(spi->master, PCH_SPBRR), + spi->max_speed_hz); + + pch_spi_set_baud_rate(spi->master, spi->max_speed_hz); + + /* set bits per word */ + pch_spi_set_bits_per_word(spi->master, spi->bits_per_word); + + if (spi->mode & SPI_LSB_FIRST) + pch_spi_setclr_reg(spi->master, PCH_SPCR, 0, SPCR_LSBF_BIT); + else + pch_spi_setclr_reg(spi->master, PCH_SPCR, SPCR_LSBF_BIT, 0); + + if (spi->mode & SPI_CPOL) + pch_spi_setclr_reg(spi->master, PCH_SPCR, SPCR_CPOL_BIT, 0); + else + pch_spi_setclr_reg(spi->master, PCH_SPCR, 0, SPCR_CPOL_BIT); + + if (spi->mode & SPI_CPHA) + pch_spi_setclr_reg(spi->master, PCH_SPCR, SPCR_CPHA_BIT, 0); + else + pch_spi_setclr_reg(spi->master, PCH_SPCR, 0, SPCR_CPHA_BIT); + + dev_dbg(&spi->dev, + "%s SPCR content after setting LSB/MSB and MODE= %x\n", + __func__, reg_spcr_val); + + /* Clear the FIFO by toggling FICLR to 1 and back to 0 */ + pch_spi_clear_fifo(spi->master); +} + +/** + * pch_spi_enable_interrupts() - Enables specified interrupts + * @master: Pointer to struct spi_master. + * @interrupt: Interrups to be enabled. + */ +static void pch_spi_enable_interrupts(struct spi_master *master, u8 interrupt) +{ + u32 reg_val_spcr; + + dev_dbg(&master->dev, "%s SPCR content=%x\n", __func__, reg_val_spcr); + + if (interrupt & PCH_RFI) { + /* set RFIE bit in SPCR */ + dev_dbg(&master->dev, "setting RFI in %s\n", __func__); + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_RFIE_BIT, 0); + } + + if (interrupt & PCH_TFI) { + /* set TFIE bit in SPCR */ + dev_dbg(&master->dev, "setting TFI in %s\n", __func__); + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_TFIE_BIT, 0); + } + + if (interrupt & PCH_FI) { + /* set FIE bit in SPCR */ + dev_dbg(&master->dev, "setting FI in %s\n", __func__); + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FIE_BIT, 0); + } + + if (interrupt & PCH_ORI) { + /* set ORIE bit in SPCR */ + dev_dbg(&master->dev, "setting ORI in %s\n", __func__); + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_ORIE_BIT, 0); + } + + if (interrupt & PCH_MDFI) { + /* set MODFIE bit in SPCR */ + dev_dbg(&master->dev, "setting MDFI in %s\n", __func__); + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MDFIE_BIT, 0); + } +} + +/** + * pch_spi_set_threshold() - Sets Tx/Rx FIFO thresholds + * @spi: Pointer to struct spi_device. + * @threshold: Threshold value to be set. + * @dir: Rx or Tx threshold to be set. + */ +static void pch_spi_set_threshold(struct spi_device *spi, u32 threshold, u8 dir) +{ + + if (dir == PCH_RX) { + dev_dbg(&spi->dev, "%s setting Rx threshold\n", __func__); + pch_spi_setclr_reg(spi->master, PCH_SPCR, + threshold << SPCR_RFIC_FIELD, + ~MASK_RFIC_SPCR_BITS); + + } else if (dir == PCH_TX) { + dev_dbg(&spi->dev, "%s setting Tx threshold\n", __func__); + pch_spi_setclr_reg(spi->master, PCH_SPCR, + (threshold << SPCR_TFIC_FIELD) , + ~MASK_TFIC_SPCR_BITS); + } +} + +/** + * pch_spi_reset() - Clears SPI registers + * @master: Pointer to struct spi_master. + */ +static void pch_spi_reset(struct spi_master *master) +{ + /* write 1 to reset SPI */ + pch_spi_writereg(master, PCH_SRST, 0x1); + + /* clear reset */ + pch_spi_writereg(master, PCH_SRST, 0x0); +} + +static int pch_spi_setup(struct spi_device *pspi) +{ + /* check bits per word */ + if ((pspi->bits_per_word) == 0) { + pspi->bits_per_word = 8; + dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__); + } + + if (((pspi->bits_per_word) != 8) && + ((pspi->bits_per_word != 16))) { + dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); + return -EINVAL; + } + + /* Check baud rate setting */ + /* if baud rate of chip is greater than + max we can support,return error */ + if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE) + pspi->max_speed_hz = PCH_MAX_BAUDRATE; + + dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, + ((pspi->mode) & (SPI_CPOL | SPI_CPHA))); + + return 0; +} + +static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) +{ + + struct spi_transfer *transfer; + struct pch_spi_data *data = spi_master_get_devdata(pspi->master); + int retval; + unsigned long flags; + + /* validate spi message and baud rate */ + if (unlikely((list_empty(&pmsg->transfers) == 1) || + (pspi->max_speed_hz == 0))) { + if (list_empty(&pmsg->transfers) == 1) + dev_err(&pspi->dev, "%s list empty\n", __func__); + + if ((pspi->max_speed_hz) == 0) { + dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", + __func__, pspi->max_speed_hz); + } + dev_err(&pspi->dev, "%s returning EINVAL\n", __func__); + + retval = -EINVAL; + goto err_out; + } + + dev_dbg(&pspi->dev, "%s Transfer List not empty. " + "Transfer Speed is set.\n", __func__); + + spin_lock_irqsave(&data->lock, flags); + + /* validate Tx/Rx buffers and Transfer length */ + list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { + if ((!(transfer->tx_buf)) && (!(transfer->rx_buf))) { + dev_err(&pspi->dev, + "%s Tx and Rx buffer NULL\n", __func__); + retval = -EINVAL; + goto err_return_spinlock; + } + + if (!(transfer->len)) { + dev_err(&pspi->dev, "%s Transfer length invalid\n", + __func__); + retval = -EINVAL; + goto err_return_spinlock; + } + + dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length" + " valid\n", __func__); + + /* if baud rate hs been specified validate the same */ + if (transfer->speed_hz) { + if ((transfer->speed_hz) > PCH_MAX_BAUDRATE) + transfer->speed_hz = PCH_MAX_BAUDRATE; + } + + /* if bits per word has been specified validate the same */ + if (transfer->bits_per_word) { + if ((transfer->bits_per_word != 8) + && (transfer->bits_per_word != 16)) { + retval = -EINVAL; + dev_err(&pspi->dev, + "%s Invalid bits per word\n", __func__); + goto err_return_spinlock; + } + } + } + + /* We won't process any messages if we have been asked to terminate */ + + if (STATUS_EXITING == (data->status)) { + dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__); + retval = -ESHUTDOWN; + goto err_return_spinlock; + } + + /* If suspended ,return -EINVAL */ + if (data->board_dat->suspend_sts) { + dev_err(&pspi->dev, + "%s bSuspending= true returning EINVAL\n", __func__); + retval = -EINVAL; + goto err_return_spinlock; + } + + /* set status of message */ + pmsg->actual_length = 0; + + dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status); + + pmsg->status = -EINPROGRESS; + + /* add message to queue */ + list_add_tail(&pmsg->queue, &data->queue); + + dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__); + + /* schedule work queue to run */ + queue_work(data->wk, &data->work); + + dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__); + + retval = 0; + +err_return_spinlock: + spin_unlock_irqrestore(&data->lock, flags); +err_out: + dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval); + return retval; +} + +static inline void pch_spi_select_chip(struct pch_spi_data *data, + struct spi_device *pspi) +{ + if ((data->current_chip) != NULL) { + if ((pspi->chip_select) != (data->n_curnt_chip)) { + dev_dbg(&pspi->dev, + "%s : different slave-Invoking\n", __func__); + data->current_chip = NULL; + } + } + + data->current_chip = pspi; + + data->n_curnt_chip = data->current_chip->chip_select; + + dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__); + pch_spi_setup_transfer(pspi); +} + +static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, + struct spi_message **ppmsg) +{ + int b_mem_fail; + int size; + u32 n_writes; + int j; + struct spi_message *pmsg; + const u8 *tx_buf; + const u16 *tx_sbuf; + + pmsg = *ppmsg; + + /* set baud rate if needed */ + if (data->cur_trans->speed_hz) { + dev_dbg(&data->master->dev, + "%s:pctrldatasetting baud rate\n", __func__); + pch_spi_set_baud_rate(data->master, + (data->cur_trans->speed_hz)); + } + + /* set bits per word if needed */ + if ((data->cur_trans->bits_per_word) && + ((data->current_msg->spi->bits_per_word) != + (data->cur_trans->bits_per_word))) { + dev_dbg(&data->master->dev, + "%s:setting bits per word\n", __func__); + pch_spi_set_bits_per_word(data->master, + (data->cur_trans->bits_per_word)); + *bpw = data->cur_trans->bits_per_word; + } else { + *bpw = data->current_msg->spi->bits_per_word; + } + + /* reset Tx/Rx index */ + data->tx_index = 0; + data->rx_index = 0; + + data->bpw_len = data->cur_trans->len / (*bpw / 8); + b_mem_fail = false; + + /* find alloc size */ + size = (data->cur_trans->len) * (sizeof(*(data->pkt_tx_buff))); + /* allocate memory for pkt_tx_buff & pkt_rx_buffer */ + data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); + + if (data->pkt_tx_buff != NULL) { + data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); + + if (data->pkt_rx_buff == NULL) { + b_mem_fail = true; + kfree(data->pkt_tx_buff); + } + } else { + b_mem_fail = true; + } + + if (b_mem_fail) { + /* flush queue and set status of all transfers to -ENOMEM */ + dev_err(&data->master->dev, + "Kzalloc fail in %s messages\n", __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -ENOMEM; + + if (pmsg->complete != 0) + pmsg->complete(pmsg->context); + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + + return; + } + + /* copy Tx Data */ + if ((data->cur_trans->tx_buf) != NULL) { + if (*bpw == 8) { + for (j = 0; j < (data->bpw_len); j++) { + tx_buf = data->cur_trans->tx_buf; + data->pkt_tx_buff[j] = tx_buf[j]; + } + } else { + for (j = 0; j < (data->bpw_len); j++) { + tx_sbuf = data->cur_trans->tx_buf; + data->pkt_tx_buff[j] = tx_sbuf[j]; + } + } + } + + /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */ + if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) + n_writes = PCH_MAX_FIFO_DEPTH; + else + n_writes = (data->bpw_len); + + dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " + "0x2 to SSNXCR\n", __func__); + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); + + for (j = 0; j < n_writes; j++) { + pch_spi_writereg(data->master, PCH_SPDWR, + data->pkt_tx_buff[j]); + } + + /* update tx_index */ + data->tx_index = j; + + /* reset transfer complete flag */ + data->transfer_complete = false; + data->transfer_active = true; +} + + +static void pch_spi_nomore_transfer(struct pch_spi_data *data, + struct spi_message *pmsg) +{ + dev_dbg(&data->master->dev, + "%s:no more transfers in this message\n", __func__); + /* Invoke complete callback + [To the spi core..indicating end of transfer] */ + data->current_msg->status = 0; + + if ((data->current_msg->complete) != 0) { + dev_dbg(&data->master->dev, + "%s:Invoking callback of SPI core\n", __func__); + data->current_msg->complete(data->current_msg->context); + } + + /* update status in global variable */ + data->bcurrent_msg_processing = false; + + dev_dbg(&data->master->dev, + "%s:data->bcurrent_msg_processing = false\n", __func__); + + data->current_msg = NULL; + data->cur_trans = NULL; + + /* check if we have items in list and not suspending */ + /* return 1 if list empty */ + if ((list_empty(&data->queue) == 0) && + (!(data->board_dat->suspend_sts)) + && (data->status != STATUS_EXITING)) { + /* We have some more work to do (either there is more tranint + bpw;sfer requests in the current message or there are + more messages) + */ + dev_dbg(&data->master->dev, + "%s:we have pending messages-Invoking queue_work\n", + __func__); + queue_work(data->wk, &data->work); + } else if ((data->board_dat->suspend_sts) || + (data->status == STATUS_EXITING)) { + dev_dbg(&data->master->dev, + "%s suspend/remove initiated, flushing queue\n", + __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -EIO; + + if (pmsg->complete != 0) + pmsg->complete(pmsg->context); + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + } +} + +static void pch_spi_set_ir(struct pch_spi_data *data) +{ + u32 reg_spcr_val; + + /* enable interrupts */ + if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { + /* set receive threhold to PCH_RX_THOLD */ + pch_spi_set_threshold(data->current_chip, PCH_RX_THOLD, PCH_RX); + /* enable FI and RFI interrupts */ + pch_spi_enable_interrupts(data->master, PCH_RFI | PCH_FI); + } else { + /* set receive threhold to maximum */ + pch_spi_set_threshold(data->current_chip, PCH_RX_THOLD_MAX, + PCH_RX); + /* enable FI interrupt */ + pch_spi_enable_interrupts(data->master, PCH_FI); + } + + dev_dbg(&data->master->dev, + "%s:invoking pch_spi_set_enable to enable SPI\n", __func__); + + /* SPI set enable */ + reg_spcr_val = pch_spi_readreg(data->current_chip->master, PCH_SPCR); + pch_set_bitmsk(®_spcr_val, SPCR_SPE_BIT); + pch_spi_writereg(data->current_chip->master, PCH_SPCR, reg_spcr_val); + + + /* Wait until the transfer completes; go to sleep after + initiating the transfer. */ + dev_dbg(&data->master->dev, + "%s:waiting for transfer to get over\n", __func__); + + wait_event_interruptible(data->wait, data->transfer_complete); + + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL); + dev_dbg(&data->master->dev, + "%s:no more control over SSN-writing 0 to SSNXCR.", __func__); + + data->transfer_active = false; + dev_dbg(&data->master->dev, + "%s set data->transfer_active = false\n", __func__); + + /* clear all interrupts */ + pch_spi_writereg(data->master, PCH_SPSR, + (pch_spi_readreg(data->master, PCH_SPSR))); + /* disable interrupts */ + pch_spi_disable_interrupts(data->master, PCH_ALL); +} + +static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) +{ + int j; + u8 *rx_buf; + u16 *rx_sbuf; + + /* copy Rx Data */ + if (!(data->cur_trans->rx_buf)) + return; + + if (bpw == 8) { + for (j = 0; j < (data->bpw_len); j++) { + rx_buf = data->cur_trans->rx_buf; + rx_buf[j] = (data->pkt_rx_buff[j]) & 0xFF; + } + } else { + for (j = 0; j < (data->bpw_len); j++) { + rx_sbuf = data->cur_trans->rx_buf; + rx_sbuf[j] = data->pkt_rx_buff[j]; + } + } +} + + +static void pch_spi_process_messages(struct work_struct *pwork) +{ + struct spi_message *pmsg; + int bpw; + + struct pch_spi_data *data = + container_of(pwork, struct pch_spi_data, work); + dev_dbg(&data->master->dev, "%s data initialized\n", __func__); + + spin_lock(&data->lock); + + /* check if suspend has been initiated;if yes flush queue */ + if ((data->board_dat->suspend_sts) || + (data->status == STATUS_EXITING)) { + dev_dbg(&data->master->dev, + "%s suspend/remove initiated,flushing queue\n", + __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -EIO; + + if (pmsg->complete != 0) { + spin_unlock(&data->lock); + pmsg->complete(pmsg->context); + spin_lock(&data->lock); + } + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + + spin_unlock(&data->lock); + return; + } + + data->bcurrent_msg_processing = true; + dev_dbg(&data->master->dev, + "%s Set data->bcurrent_msg_processing= true\n", __func__); + + /* Get the message from the queue and delete it from there. */ + data->current_msg = + list_entry(data->queue.next, struct spi_message, queue); + + list_del_init(&data->current_msg->queue); + + data->current_msg->status = 0; + + pch_spi_select_chip(data, data->current_msg->spi); + + spin_unlock(&data->lock); + + do { + /* If we are already processing a message get the next + transfer structure from the message otherwise retrieve + the 1st transfer request from the message. */ + spin_lock(&data->lock); + + if (data->cur_trans == NULL) { + data->cur_trans = + list_entry(data->current_msg->transfers. + next, struct spi_transfer, + transfer_list); + dev_dbg(&data->master->dev, + "%s :Getting 1st transfer message\n", __func__); + } else { + data->cur_trans = + list_entry(data->cur_trans->transfer_list.next, + struct spi_transfer, + transfer_list); + dev_dbg(&data->master->dev, + "%s :Getting next transfer message\n", + __func__); + } + + spin_unlock(&data->lock); + + pch_spi_set_tx(data, &bpw, &pmsg); + + /* Control interrupt*/ + pch_spi_set_ir(data); + + /* Disable SPI transfer */ + pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0, + SPCR_SPE_BIT); + + /* clear FIFO */ + pch_spi_clear_fifo(data->master); + + /* copy Rx Data */ + pch_spi_copy_rx_data(data, bpw); + + /* free memory */ + kfree(data->pkt_rx_buff); + data->pkt_rx_buff = NULL; + + kfree(data->pkt_tx_buff); + data->pkt_tx_buff = NULL; + + /* increment message count */ + data->current_msg->actual_length += data->cur_trans->len; + + dev_dbg(&data->master->dev, + "%s:data->current_msg->actual_length=%d\n", + __func__, data->current_msg->actual_length); + + /* check for delay */ + if (data->cur_trans->delay_usecs) { + dev_dbg(&data->master->dev, "%s:" + "delay in usec=%d\n", __func__, + data->cur_trans->delay_usecs); + udelay(data->cur_trans->delay_usecs); + } + + spin_lock(&data->lock); + + /* No more transfer in this message. */ + if ((data->cur_trans->transfer_list.next) == + &(data->current_msg->transfers)) { + pch_spi_nomore_transfer(data, pmsg); + } + + spin_unlock(&data->lock); + + } while ((data->cur_trans) != NULL); +} + +static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) +{ + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); + + /* free workqueue */ + if (board_dat->data->wk != NULL) { + destroy_workqueue(board_dat->data->wk); + board_dat->data->wk = NULL; + dev_dbg(&board_dat->pdev->dev, + "%s destroy_workqueue invoked successfully\n", + __func__); + } + + /* disable interrupts & free IRQ */ + if (board_dat->irq_reg_sts) { + /* disable interrupts */ + pch_spi_disable_interrupts(board_dat->data-> + master, PCH_ALL); + dev_dbg(&board_dat->pdev->dev, + "%s pch_spi_disable_interrupts invoked " + "successfully\n", __func__); + + /* free IRQ */ + free_irq(board_dat->pdev->irq, (void *)board_dat); + + dev_dbg(&board_dat->pdev->dev, + "%s free_irq invoked successfully\n", __func__); + + board_dat->irq_reg_sts = false; + } + + /* unmap PCI base address */ + if ((board_dat->data->io_remap_addr) != 0) { + pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr); + + board_dat->data->io_remap_addr = 0; + + dev_dbg(&board_dat->pdev->dev, + "%s pci_iounmap invoked successfully\n", __func__); + } + + /* release PCI region */ + if (board_dat->pci_req_sts) { + pci_release_regions(board_dat->pdev); + dev_dbg(&board_dat->pdev->dev, + "%s pci_release_regions invoked successfully\n", + __func__); + board_dat->pci_req_sts = false; + } +} + +static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) +{ + void __iomem *io_remap_addr; + int retval; + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); + + /* iniatize queue of pending messages */ + INIT_LIST_HEAD(&(board_dat->data->queue)); + + /* initialize spin locks */ + spin_lock_init(&(board_dat->data->lock)); + + /* set channel status */ + board_dat->data->status = STATUS_RUNNING; + + /* initialize work structure */ + INIT_WORK(&(board_dat->data->work), + pch_spi_process_messages); + + /* initialize wait queues */ + init_waitqueue_head(&(board_dat->data->wait)); + + /* create workqueue */ + board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME); + + if ((board_dat->data->wk) == NULL) { + dev_err(&board_dat->pdev->dev, + "%s create_singlet hread_workqueue failed\n", __func__); + retval = -EBUSY; + goto err_return; + } + + dev_dbg(&board_dat->pdev->dev, + "%s create_singlethread_workqueue success\n", __func__); + + retval = pci_request_regions(board_dat->pdev, KBUILD_MODNAME); + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s request_region failed\n", __func__); + goto err_return; + } + + board_dat->pci_req_sts = true; + + io_remap_addr = pci_iomap(board_dat->pdev, 1, 0); + + if (io_remap_addr == 0) { + dev_err(&board_dat->pdev->dev, + "%s pci_iomap failed\n", __func__); + retval = -ENOMEM; + goto err_return; + } + + /* calculate base address for all channels */ + board_dat->data->io_remap_addr = io_remap_addr; + + /* reset PCH SPI h/w */ + pch_spi_reset(board_dat->data->master); + dev_dbg(&board_dat->pdev->dev, + "%s pch_spi_reset invoked successfully\n", __func__); + + /* register IRQ */ + retval = request_irq(board_dat->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, (void *)board_dat); + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s request_irq failed\n", __func__); + goto err_return; + } + + dev_dbg(&board_dat->pdev->dev, "%s request_irq returned=%d\n", + __func__, retval); + + board_dat->irq_reg_sts = true; + dev_dbg(&board_dat->pdev->dev, + "%s data->irq_reg_sts=true\n", __func__); + +err_return: + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s FAIL:invoking pch_spi_free_resources\n", __func__); + pch_spi_free_resources(board_dat); + } + + dev_dbg(&board_dat->pdev->dev, "%s Return=%d\n", __func__, retval); + + return retval; +} + +static int pch_spi_check_request_pending(struct pch_spi_board_data *board_dat) +{ + int sts; + u16 count; + + count = 500; + spin_lock(&(board_dat->data->lock)); + board_dat->data->status = STATUS_EXITING; + + while ((list_empty(&(board_dat->data->queue)) == 0) && + (--count)) { + dev_dbg(&board_dat->pdev->dev, + "%s :queue not empty\n", __func__); + spin_unlock(&(board_dat->data->lock)); + msleep(PCH_SLEEP_TIME); + spin_lock(&(board_dat->data->lock)); + } + + spin_unlock(&(board_dat->data->lock)); + + if (count) { + sts = 0; + dev_dbg(&board_dat->pdev->dev, "%s :queue empty\n", __func__); + } else { + sts = -EBUSY; + } + + dev_dbg(&board_dat->pdev->dev, "%s : EXIT=%d\n", __func__, sts); + + return sts; +} + +static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + + struct spi_master *master; + + struct pch_spi_board_data *board_dat; + int retval; + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + /* allocate memory for private data */ + board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); + if (board_dat == NULL) { + dev_err(&pdev->dev, + " %s memory allocation for private data failed\n", + __func__); + retval = -ENOMEM; + goto err_kmalloc; + } + + dev_dbg(&pdev->dev, + "%s memory allocation for private data success\n", __func__); + + /* enable PCI device */ + retval = pci_enable_device(pdev); + if (retval != 0) { + dev_err(&pdev->dev, "%s pci_enable_device FAILED\n", __func__); + + goto err_pci_en_device; + } + + dev_dbg(&pdev->dev, "%s pci_enable_device returned=%d\n", + __func__, retval); + + board_dat->pdev = pdev; + + /* alllocate memory for SPI master */ + master = spi_alloc_master(&pdev->dev, sizeof(struct pch_spi_data)); + if (master == NULL) { + retval = -ENOMEM; + dev_err(&pdev->dev, "%s Fail.\n", __func__); + goto err_spi_alloc_master; + } + + dev_dbg(&pdev->dev, + "%s spi_alloc_master returned non NULL\n", __func__); + + /* initialize members of SPI master */ + master->bus_num = -1; + master->num_chipselect = PCH_MAX_CS; + master->setup = pch_spi_setup; + master->transfer = pch_spi_transfer; + dev_dbg(&pdev->dev, + "%s transfer member of SPI master initialized\n", __func__); + + board_dat->data = spi_master_get_devdata(master); + + board_dat->data->master = master; + board_dat->data->n_curnt_chip = 255; + board_dat->data->board_dat = board_dat; + + /* allocate resources for PCH SPI */ + retval = pch_spi_get_resources(board_dat); + if (retval != 0) { + dev_err(&pdev->dev, "%s fail(retval=%d)\n", + __func__, retval); + goto err_spi_get_resources; + } + + dev_dbg(&pdev->dev, "%s pch_spi_get_resources returned=%d\n", + __func__, retval); + + /* save private data in dev */ + pci_set_drvdata(pdev, (void *)board_dat); + dev_dbg(&pdev->dev, "%s invoked pci_set_drvdata\n", __func__); + + /* set master mode */ + pch_spi_set_master_mode(master); + dev_dbg(&pdev->dev, + "%s invoked pch_spi_set_master_mode\n", __func__); + + /* Register the controller with the SPI core. */ + retval = spi_register_master(master); + if (retval != 0) { + dev_err(&pdev->dev, + "%s spi_register_master FAILED\n", __func__); + goto err_spi_reg_master; + } + + dev_dbg(&pdev->dev, "%s spi_register_master returned=%d\n", + __func__, retval); + + + return 0; + +err_spi_reg_master: + spi_unregister_master(master); +err_spi_get_resources: +err_spi_alloc_master: + spi_master_put(master); + pci_disable_device(pdev); +err_pci_en_device: + kfree(board_dat); +err_kmalloc: + return retval; +} + +static void pch_spi_remove(struct pci_dev *pdev) +{ + struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board_dat) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return; + } + + /* check for any pending messages */ + if ((-EBUSY) == pch_spi_check_request_pending(board_dat)) { + dev_dbg(&pdev->dev, + "%s pch_spi_check_request_pending returned" + " EBUSY\n", __func__); + /* no need to take any particular action; proceed with remove + even though queue is not empty */ + } + + /* Free resources allocated for PCH SPI */ + pch_spi_free_resources(board_dat); + + /* Unregister SPI master */ + spi_unregister_master(board_dat->data->master); + + /* free memory for private data */ + kfree(board_dat); + + pci_set_drvdata(pdev, NULL); + + /* disable PCI device */ + pci_disable_device(pdev); + + dev_dbg(&pdev->dev, "%s invoked pci_disable_device\n", __func__); +} + +#ifdef CONFIG_PM +static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + u8 count; + int retval; + + struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board_dat) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + retval = 0; + board_dat->suspend_sts = true; + + /* check if the current message is processed: + Only after thats done the transfer will be suspended */ + count = 255; + while ((--count) > 0) { + if (!(board_dat->data->bcurrent_msg_processing)) { + dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_" + "msg_processing = false\n", __func__); + break; + } else { + dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_msg_" + "processing = true\n", __func__); + } + msleep(PCH_SLEEP_TIME); + } + + /* Free IRQ */ + if (board_dat->irq_reg_sts) { + /* disable all interrupts */ + pch_spi_disable_interrupts(board_dat->data->master, PCH_ALL); + pch_spi_reset(board_dat->data->master); + dev_dbg(&pdev->dev, + "%s pch_spi_disable_interrupts invoked successfully\n", + __func__); + + free_irq(board_dat->pdev->irq, (void *)board_dat); + + board_dat->irq_reg_sts = false; + dev_dbg(&pdev->dev, + "%s free_irq invoked successfully.\n", __func__); + } + + /* save config space */ + retval = pci_save_state(pdev); + + if (retval == 0) { + dev_dbg(&pdev->dev, "%s pci_save_state returned=%d\n", + __func__, retval); + /* disable PM notifications */ + pci_enable_wake(pdev, PCI_D3hot, 0); + dev_dbg(&pdev->dev, + "%s pci_enable_wake invoked successfully\n", __func__); + /* disable PCI device */ + pci_disable_device(pdev); + dev_dbg(&pdev->dev, + "%s pci_disable_device invoked successfully\n", + __func__); + /* move device to D3hot state */ + pci_set_power_state(pdev, PCI_D3hot); + dev_dbg(&pdev->dev, + "%s pci_set_power_state invoked successfully\n", + __func__); + } else { + dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__); + } + + dev_dbg(&pdev->dev, "%s return=%d\n", __func__, retval); + + return retval; +} + +static int pch_spi_resume(struct pci_dev *pdev) +{ + int retval; + + struct pch_spi_board_data *board = pci_get_drvdata(pdev); + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + /* move device to DO power state */ + pci_set_power_state(pdev, PCI_D0); + + /* restore state */ + pci_restore_state(pdev); + + retval = pci_enable_device(pdev); + if (retval < 0) { + dev_err(&pdev->dev, + "%s pci_enable_device failed\n", __func__); + } else { + /* disable PM notifications */ + pci_enable_wake(pdev, PCI_D3hot, 0); + + /* register IRQ handler */ + if (!(board->irq_reg_sts)) { + /* register IRQ */ + retval = request_irq(board->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, + board); + if (retval < 0) { + dev_err(&pdev->dev, + "%s request_irq failed\n", __func__); + return retval; + } + board->irq_reg_sts = true; + + /* reset PCH SPI h/w */ + pch_spi_reset(board->data->master); + pch_spi_set_master_mode(board->data->master); + + /* set suspend status to false */ + board->suspend_sts = false; + + } + } + + dev_dbg(&pdev->dev, "%s returning=%d\n", __func__, retval); + + return retval; +} +#else +#define pch_spi_suspend NULL +#define pch_spi_resume NULL + +#endif + +static struct pci_driver pch_spi_pcidev = { + .name = "pch_spi", + .id_table = pch_spi_pcidev_id, + .probe = pch_spi_probe, + .remove = pch_spi_remove, + .suspend = pch_spi_suspend, + .resume = pch_spi_resume, +}; + +static int __init pch_spi_init(void) +{ + return pci_register_driver(&pch_spi_pcidev); +} +module_init(pch_spi_init); + + +static void __exit pch_spi_exit(void) +{ + pci_unregister_driver(&pch_spi_pcidev); +} +module_exit(pch_spi_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PCH SPI PCI Driver"); -- cgit v0.10.2 From 65308c46b760bb2ccb043b47bb5f053dbb8d11b5 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 29 Sep 2010 17:31:34 +0900 Subject: spi/topcliff: cleanups for style and conciseness This patch makes multiple cleanups to the new topcliff pch spi driver including, but not limited to, - removing superfluous brackets around variables - open coding functions that are only used once - removing unnecessary line breaks - removing unused functions - simplifying the interrupt enable/disable code - remove unnecessary (void *) casts. - remove b_mem_fail from pch_spi_set_tx to code it more cleanly - shorten dev_dbg() messages for conciseness and readability More cleanups are still needed in this driver. In particular, - the driver filename should be changed to spi_topcliff_pch.c - many of the dev_dbg() lines should be trimmed (particularly the ones on unconditional code paths). - I suspect that the locking model not correct. I'd like to know what drivers' critical regions are, and how they are protected. - get_resources and release_resources probably should be open coded in .probe and .release respectively. Signed-off-by: Grant Likely diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c index 58b183f..9774623 100644 --- a/drivers/spi/spi_topcliff_pch.c +++ b/drivers/spi/spi_topcliff_pch.c @@ -1,8 +1,6 @@ /* * SPI bus driver for the Topcliff PCH used by Intel SoCs - */ - -/* + * * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. * * This program is free software; you can redistribute it and/or modify @@ -19,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ +#include #include #include #include @@ -45,17 +44,7 @@ #define PCH_RX_THOLD 7 #define PCH_RX_THOLD_MAX 15 -#define PCH_RX 1 -#define PCH_TX 2 - -/* various interrupts */ -#define PCH_TFI 0x1 -#define PCH_RFI 0x2 -#define PCH_FI 0x4 -#define PCH_ORI 0x8 -#define PCH_MDFI 0x10 -#define PCH_ALL (PCH_TFI|PCH_RFI|PCH_FI|PCH_ORI|PCH_MDFI) #define PCH_MAX_BAUDRATE 5000000 #define PCH_MAX_FIFO_DEPTH 16 @@ -86,6 +75,8 @@ #define SPSR_FI_BIT (1 << 2) #define SPBRR_SIZE_BIT (1 << 10) +#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|SPCR_ORIE_BIT|SPCR_MDFIE_BIT) + #define SPCR_RFIC_FIELD 20 #define SPCR_TFIC_FIELD 16 @@ -176,16 +167,6 @@ static struct pci_device_id pch_spi_pcidev_id[] = { {0,} }; -static inline void pch_set_bitmsk(u32 *var, u32 bitmask) -{ - *var |= bitmask; -} - -static inline void pch_clr_bitmsk(u32 *var, u32 bitmask) -{ - *var &= (~(bitmask)); -} - /** * pch_spi_writereg() - Performs register writes * @master: Pointer to struct spi_master. @@ -194,9 +175,7 @@ static inline void pch_clr_bitmsk(u32 *var, u32 bitmask) */ static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val) { - struct pch_spi_data *data = spi_master_get_devdata(master); - iowrite32(val, (data->io_remap_addr + idx)); } @@ -208,19 +187,9 @@ static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val) static inline u32 pch_spi_readreg(struct spi_master *master, int idx) { struct pch_spi_data *data = spi_master_get_devdata(master); - return ioread32(data->io_remap_addr + idx); } -/* ope==true:Set bit, ope==false:Clear bit */ -static inline void pch_spi_setclr_bit(u32 *val, u32 pos, bool ope) -{ - if (ope) - *val |= pos; - else - *val &= (~(pos)); -} - static inline void pch_spi_setclr_reg(struct spi_master *master, int idx, u32 set, u32 clr) { @@ -229,7 +198,6 @@ static inline void pch_spi_setclr_reg(struct spi_master *master, int idx, pch_spi_writereg(master, idx, tmp); } - static void pch_spi_set_master_mode(struct spi_master *master) { pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0); @@ -245,35 +213,6 @@ static void pch_spi_clear_fifo(struct spi_master *master) pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT); } -/** - * ch_spi_disable_interrupts() - Disables specified interrupts - * @master: Pointer to struct spi_master. - * @interrupt: Interrups to be enabled. - */ -static void pch_spi_disable_interrupts(struct spi_master *master, u8 interrupt) -{ - u32 clr_flags = 0; - - if (interrupt & PCH_RFI) - clr_flags |= SPCR_RFIE_BIT; - - if (interrupt & PCH_TFI) - clr_flags |= SPCR_TFIE_BIT; - - if (interrupt & PCH_FI) - clr_flags |= SPCR_FIE_BIT; - - if (interrupt & PCH_ORI) - clr_flags |= SPCR_ORIE_BIT; - - if (interrupt & PCH_MDFI) - clr_flags |= SPCR_MDFIE_BIT; - - pch_spi_setclr_reg(master, PCH_SPCR, 0, clr_flags); - - dev_dbg(&master->dev, "%s clearing bits =%x\n", __func__, clr_flags); -} - static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, void __iomem *io_remap_addr) { @@ -309,9 +248,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, /* disable RFI if not needed */ if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) { reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR); - - /* disable RFI */ - pch_clr_bitmsk(®_spcr_val, SPCR_RFIE_BIT); + reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */ /* reset rx threshold */ reg_spcr_val &= MASK_RFIC_SPCR_BITS; @@ -329,7 +266,8 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, /* if transfer complete interrupt */ if (reg_spsr_val & SPSR_FI_BIT) { /* disable FI & RFI interrupts */ - pch_spi_disable_interrupts(data->master, PCH_FI | PCH_RFI); + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, + SPCR_FIE_BIT | SPCR_TFIE_BIT); /* transfer is completed;inform pch_spi_process_messages */ data->transfer_complete = true; @@ -337,7 +275,6 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, } } - /** * pch_spi_handler() - Interrupt handler * @irq: The interrupt number. @@ -350,7 +287,6 @@ static irqreturn_t pch_spi_handler(int irq, void *dev_id) void __iomem *spsr; void __iomem *io_remap_addr; irqreturn_t ret = IRQ_NONE; - struct pch_spi_board_data *board_dat = dev_id; if (board_dat->suspend_sts) { @@ -366,7 +302,6 @@ static irqreturn_t pch_spi_handler(int irq, void *dev_id) reg_spsr_val = ioread32(spsr); /* Check if the interrupt is for SPI device */ - if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) { pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr); ret = IRQ_HANDLED; @@ -385,12 +320,9 @@ static irqreturn_t pch_spi_handler(int irq, void *dev_id) */ static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz) { - u32 n_spbr; - - n_spbr = PCH_CLOCK_HZ / (speed_hz * 2); + u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2); /* if baud rate is less than we can support limit it */ - if (n_spbr > PCH_MAX_SPBR) n_spbr = PCH_MAX_SPBR; @@ -417,106 +349,30 @@ static void pch_spi_set_bits_per_word(struct spi_master *master, */ static void pch_spi_setup_transfer(struct spi_device *spi) { - u32 reg_spcr_val; + u32 flags = 0; dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n", __func__, pch_spi_readreg(spi->master, PCH_SPBRR), spi->max_speed_hz); - pch_spi_set_baud_rate(spi->master, spi->max_speed_hz); /* set bits per word */ pch_spi_set_bits_per_word(spi->master, spi->bits_per_word); - if (spi->mode & SPI_LSB_FIRST) - pch_spi_setclr_reg(spi->master, PCH_SPCR, 0, SPCR_LSBF_BIT); - else - pch_spi_setclr_reg(spi->master, PCH_SPCR, SPCR_LSBF_BIT, 0); - + if (!(spi->mode & SPI_LSB_FIRST)) + flags |= SPCR_LSBF_BIT; if (spi->mode & SPI_CPOL) - pch_spi_setclr_reg(spi->master, PCH_SPCR, SPCR_CPOL_BIT, 0); - else - pch_spi_setclr_reg(spi->master, PCH_SPCR, 0, SPCR_CPOL_BIT); - + flags |= SPCR_CPOL_BIT; if (spi->mode & SPI_CPHA) - pch_spi_setclr_reg(spi->master, PCH_SPCR, SPCR_CPHA_BIT, 0); - else - pch_spi_setclr_reg(spi->master, PCH_SPCR, 0, SPCR_CPHA_BIT); - - dev_dbg(&spi->dev, - "%s SPCR content after setting LSB/MSB and MODE= %x\n", - __func__, reg_spcr_val); + flags |= SPCR_CPHA_BIT; + pch_spi_setclr_reg(spi->master, PCH_SPCR, flags, + (SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT)); /* Clear the FIFO by toggling FICLR to 1 and back to 0 */ pch_spi_clear_fifo(spi->master); } /** - * pch_spi_enable_interrupts() - Enables specified interrupts - * @master: Pointer to struct spi_master. - * @interrupt: Interrups to be enabled. - */ -static void pch_spi_enable_interrupts(struct spi_master *master, u8 interrupt) -{ - u32 reg_val_spcr; - - dev_dbg(&master->dev, "%s SPCR content=%x\n", __func__, reg_val_spcr); - - if (interrupt & PCH_RFI) { - /* set RFIE bit in SPCR */ - dev_dbg(&master->dev, "setting RFI in %s\n", __func__); - pch_spi_setclr_reg(master, PCH_SPCR, SPCR_RFIE_BIT, 0); - } - - if (interrupt & PCH_TFI) { - /* set TFIE bit in SPCR */ - dev_dbg(&master->dev, "setting TFI in %s\n", __func__); - pch_spi_setclr_reg(master, PCH_SPCR, SPCR_TFIE_BIT, 0); - } - - if (interrupt & PCH_FI) { - /* set FIE bit in SPCR */ - dev_dbg(&master->dev, "setting FI in %s\n", __func__); - pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FIE_BIT, 0); - } - - if (interrupt & PCH_ORI) { - /* set ORIE bit in SPCR */ - dev_dbg(&master->dev, "setting ORI in %s\n", __func__); - pch_spi_setclr_reg(master, PCH_SPCR, SPCR_ORIE_BIT, 0); - } - - if (interrupt & PCH_MDFI) { - /* set MODFIE bit in SPCR */ - dev_dbg(&master->dev, "setting MDFI in %s\n", __func__); - pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MDFIE_BIT, 0); - } -} - -/** - * pch_spi_set_threshold() - Sets Tx/Rx FIFO thresholds - * @spi: Pointer to struct spi_device. - * @threshold: Threshold value to be set. - * @dir: Rx or Tx threshold to be set. - */ -static void pch_spi_set_threshold(struct spi_device *spi, u32 threshold, u8 dir) -{ - - if (dir == PCH_RX) { - dev_dbg(&spi->dev, "%s setting Rx threshold\n", __func__); - pch_spi_setclr_reg(spi->master, PCH_SPCR, - threshold << SPCR_RFIC_FIELD, - ~MASK_RFIC_SPCR_BITS); - - } else if (dir == PCH_TX) { - dev_dbg(&spi->dev, "%s setting Tx threshold\n", __func__); - pch_spi_setclr_reg(spi->master, PCH_SPCR, - (threshold << SPCR_TFIC_FIELD) , - ~MASK_TFIC_SPCR_BITS); - } -} - -/** * pch_spi_reset() - Clears SPI registers * @master: Pointer to struct spi_master. */ @@ -532,13 +388,12 @@ static void pch_spi_reset(struct spi_master *master) static int pch_spi_setup(struct spi_device *pspi) { /* check bits per word */ - if ((pspi->bits_per_word) == 0) { + if (pspi->bits_per_word == 0) { pspi->bits_per_word = 8; dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__); } - if (((pspi->bits_per_word) != 8) && - ((pspi->bits_per_word != 16))) { + if ((pspi->bits_per_word != 8) && (pspi->bits_per_word != 16)) { dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); return -EINVAL; } @@ -550,7 +405,7 @@ static int pch_spi_setup(struct spi_device *pspi) pspi->max_speed_hz = PCH_MAX_BAUDRATE; dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, - ((pspi->mode) & (SPI_CPOL | SPI_CPHA))); + (pspi->mode) & (SPI_CPOL | SPI_CPHA)); return 0; } @@ -564,17 +419,15 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) unsigned long flags; /* validate spi message and baud rate */ - if (unlikely((list_empty(&pmsg->transfers) == 1) || - (pspi->max_speed_hz == 0))) { - if (list_empty(&pmsg->transfers) == 1) - dev_err(&pspi->dev, "%s list empty\n", __func__); - - if ((pspi->max_speed_hz) == 0) { - dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", - __func__, pspi->max_speed_hz); - } - dev_err(&pspi->dev, "%s returning EINVAL\n", __func__); + if (unlikely(list_empty(&pmsg->transfers) == 1)) { + dev_err(&pspi->dev, "%s list empty\n", __func__); + retval = -EINVAL; + goto err_out; + } + if (unlikely(pspi->max_speed_hz == 0)) { + dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", + __func__, pspi->max_speed_hz); retval = -EINVAL; goto err_out; } @@ -582,32 +435,28 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) dev_dbg(&pspi->dev, "%s Transfer List not empty. " "Transfer Speed is set.\n", __func__); - spin_lock_irqsave(&data->lock, flags); - /* validate Tx/Rx buffers and Transfer length */ list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { - if ((!(transfer->tx_buf)) && (!(transfer->rx_buf))) { + if (!transfer->tx_buf && !transfer->rx_buf) { dev_err(&pspi->dev, "%s Tx and Rx buffer NULL\n", __func__); retval = -EINVAL; - goto err_return_spinlock; + goto err_out; } - if (!(transfer->len)) { + if (!transfer->len) { dev_err(&pspi->dev, "%s Transfer length invalid\n", __func__); retval = -EINVAL; - goto err_return_spinlock; + goto err_out; } dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length" " valid\n", __func__); /* if baud rate hs been specified validate the same */ - if (transfer->speed_hz) { - if ((transfer->speed_hz) > PCH_MAX_BAUDRATE) - transfer->speed_hz = PCH_MAX_BAUDRATE; - } + if (transfer->speed_hz > PCH_MAX_BAUDRATE) + transfer->speed_hz = PCH_MAX_BAUDRATE; /* if bits per word has been specified validate the same */ if (transfer->bits_per_word) { @@ -616,14 +465,15 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) retval = -EINVAL; dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); - goto err_return_spinlock; + goto err_out; } } } - /* We won't process any messages if we have been asked to terminate */ + spin_lock_irqsave(&data->lock, flags); - if (STATUS_EXITING == (data->status)) { + /* We won't process any messages if we have been asked to terminate */ + if (data->status == STATUS_EXITING) { dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__); retval = -ESHUTDOWN; goto err_return_spinlock; @@ -631,27 +481,23 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) /* If suspended ,return -EINVAL */ if (data->board_dat->suspend_sts) { - dev_err(&pspi->dev, - "%s bSuspending= true returning EINVAL\n", __func__); + dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__); retval = -EINVAL; goto err_return_spinlock; } /* set status of message */ pmsg->actual_length = 0; - dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status); pmsg->status = -EINPROGRESS; /* add message to queue */ list_add_tail(&pmsg->queue, &data->queue); - dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__); /* schedule work queue to run */ queue_work(data->wk, &data->work); - dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__); retval = 0; @@ -666,10 +512,9 @@ err_out: static inline void pch_spi_select_chip(struct pch_spi_data *data, struct spi_device *pspi) { - if ((data->current_chip) != NULL) { - if ((pspi->chip_select) != (data->n_curnt_chip)) { - dev_dbg(&pspi->dev, - "%s : different slave-Invoking\n", __func__); + if (data->current_chip != NULL) { + if (pspi->chip_select != data->n_curnt_chip) { + dev_dbg(&pspi->dev, "%s : different slave\n", __func__); data->current_chip = NULL; } } @@ -683,9 +528,8 @@ static inline void pch_spi_select_chip(struct pch_spi_data *data, } static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, - struct spi_message **ppmsg) + struct spi_message **ppmsg) { - int b_mem_fail; int size; u32 n_writes; int j; @@ -697,20 +541,16 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, /* set baud rate if needed */ if (data->cur_trans->speed_hz) { - dev_dbg(&data->master->dev, - "%s:pctrldatasetting baud rate\n", __func__); - pch_spi_set_baud_rate(data->master, - (data->cur_trans->speed_hz)); + dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__); + pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz); } /* set bits per word if needed */ - if ((data->cur_trans->bits_per_word) && - ((data->current_msg->spi->bits_per_word) != - (data->cur_trans->bits_per_word))) { - dev_dbg(&data->master->dev, - "%s:setting bits per word\n", __func__); + if (data->cur_trans->bits_per_word && + (data->current_msg->spi->bits_per_word != data->cur_trans->bits_per_word)) { + dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__); pch_spi_set_bits_per_word(data->master, - (data->cur_trans->bits_per_word)); + data->cur_trans->bits_per_word); *bpw = data->cur_trans->bits_per_word; } else { *bpw = data->current_msg->spi->bits_per_word; @@ -721,28 +561,21 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, data->rx_index = 0; data->bpw_len = data->cur_trans->len / (*bpw / 8); - b_mem_fail = false; /* find alloc size */ - size = (data->cur_trans->len) * (sizeof(*(data->pkt_tx_buff))); + size = data->cur_trans->len * sizeof(*data->pkt_tx_buff); + /* allocate memory for pkt_tx_buff & pkt_rx_buffer */ data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); - if (data->pkt_tx_buff != NULL) { data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); - - if (data->pkt_rx_buff == NULL) { - b_mem_fail = true; + if (!data->pkt_rx_buff) kfree(data->pkt_tx_buff); - } - } else { - b_mem_fail = true; } - if (b_mem_fail) { + if (!data->pkt_rx_buff) { /* flush queue and set status of all transfers to -ENOMEM */ - dev_err(&data->master->dev, - "Kzalloc fail in %s messages\n", __func__); + dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__); list_for_each_entry(pmsg, data->queue.next, queue) { pmsg->status = -ENOMEM; @@ -752,39 +585,33 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, /* delete from queue */ list_del_init(&pmsg->queue); } - return; } /* copy Tx Data */ - if ((data->cur_trans->tx_buf) != NULL) { + if (data->cur_trans->tx_buf != NULL) { if (*bpw == 8) { - for (j = 0; j < (data->bpw_len); j++) { - tx_buf = data->cur_trans->tx_buf; - data->pkt_tx_buff[j] = tx_buf[j]; - } + tx_buf = data->cur_trans->tx_buf; + for (j = 0; j < data->bpw_len; j++) + data->pkt_tx_buff[j] = *tx_buf++; } else { - for (j = 0; j < (data->bpw_len); j++) { - tx_sbuf = data->cur_trans->tx_buf; - data->pkt_tx_buff[j] = tx_sbuf[j]; - } + tx_sbuf = data->cur_trans->tx_buf; + for (j = 0; j < data->bpw_len; j++) + data->pkt_tx_buff[j] = *tx_sbuf++; } } /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */ - if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) + n_writes = data->bpw_len; + if (n_writes > PCH_MAX_FIFO_DEPTH) n_writes = PCH_MAX_FIFO_DEPTH; - else - n_writes = (data->bpw_len); - dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " + dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " "0x2 to SSNXCR\n", __func__); pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); - for (j = 0; j < n_writes; j++) { - pch_spi_writereg(data->master, PCH_SPDWR, - data->pkt_tx_buff[j]); - } + for (j = 0; j < n_writes; j++) + pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]); /* update tx_index */ data->tx_index = j; @@ -798,13 +625,12 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, static void pch_spi_nomore_transfer(struct pch_spi_data *data, struct spi_message *pmsg) { - dev_dbg(&data->master->dev, - "%s:no more transfers in this message\n", __func__); + dev_dbg(&data->master->dev, "%s called\n", __func__); /* Invoke complete callback - [To the spi core..indicating end of transfer] */ + * [To the spi core..indicating end of transfer] */ data->current_msg->status = 0; - if ((data->current_msg->complete) != 0) { + if (data->current_msg->complete != 0) { dev_dbg(&data->master->dev, "%s:Invoking callback of SPI core\n", __func__); data->current_msg->complete(data->current_msg->context); @@ -819,28 +645,26 @@ static void pch_spi_nomore_transfer(struct pch_spi_data *data, data->current_msg = NULL; data->cur_trans = NULL; - /* check if we have items in list and not suspending */ - /* return 1 if list empty */ + /* check if we have items in list and not suspending + * return 1 if list empty */ if ((list_empty(&data->queue) == 0) && - (!(data->board_dat->suspend_sts)) - && (data->status != STATUS_EXITING)) { + (!data->board_dat->suspend_sts) && + (data->status != STATUS_EXITING)) { /* We have some more work to do (either there is more tranint - bpw;sfer requests in the current message or there are - more messages) - */ - dev_dbg(&data->master->dev, - "%s:we have pending messages-Invoking queue_work\n", - __func__); + * bpw;sfer requests in the current message or there are + *more messages) + */ + dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__); queue_work(data->wk, &data->work); - } else if ((data->board_dat->suspend_sts) || - (data->status == STATUS_EXITING)) { + } else if (data->board_dat->suspend_sts || + data->status == STATUS_EXITING) { dev_dbg(&data->master->dev, "%s suspend/remove initiated, flushing queue\n", __func__); list_for_each_entry(pmsg, data->queue.next, queue) { pmsg->status = -EIO; - if (pmsg->complete != 0) + if (pmsg->complete) pmsg->complete(pmsg->context); /* delete from queue */ @@ -851,30 +675,29 @@ static void pch_spi_nomore_transfer(struct pch_spi_data *data, static void pch_spi_set_ir(struct pch_spi_data *data) { - u32 reg_spcr_val; - /* enable interrupts */ if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { /* set receive threhold to PCH_RX_THOLD */ - pch_spi_set_threshold(data->current_chip, PCH_RX_THOLD, PCH_RX); + pch_spi_setclr_reg(data->master, PCH_SPCR, + PCH_RX_THOLD << SPCR_TFIC_FIELD, + ~MASK_TFIC_SPCR_BITS); /* enable FI and RFI interrupts */ - pch_spi_enable_interrupts(data->master, PCH_RFI | PCH_FI); + pch_spi_setclr_reg(data->master, PCH_SPCR, + SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0); } else { /* set receive threhold to maximum */ - pch_spi_set_threshold(data->current_chip, PCH_RX_THOLD_MAX, - PCH_RX); + pch_spi_setclr_reg(data->master, PCH_SPCR, + PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD, + ~MASK_TFIC_SPCR_BITS); /* enable FI interrupt */ - pch_spi_enable_interrupts(data->master, PCH_FI); + pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0); } dev_dbg(&data->master->dev, "%s:invoking pch_spi_set_enable to enable SPI\n", __func__); /* SPI set enable */ - reg_spcr_val = pch_spi_readreg(data->current_chip->master, PCH_SPCR); - pch_set_bitmsk(®_spcr_val, SPCR_SPE_BIT); - pch_spi_writereg(data->current_chip->master, PCH_SPCR, reg_spcr_val); - + pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT, 0); /* Wait until the transfer completes; go to sleep after initiating the transfer. */ @@ -893,9 +716,9 @@ static void pch_spi_set_ir(struct pch_spi_data *data) /* clear all interrupts */ pch_spi_writereg(data->master, PCH_SPSR, - (pch_spi_readreg(data->master, PCH_SPSR))); + pch_spi_readreg(data->master, PCH_SPSR)); /* disable interrupts */ - pch_spi_disable_interrupts(data->master, PCH_ALL); + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); } static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) @@ -905,19 +728,17 @@ static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) u16 *rx_sbuf; /* copy Rx Data */ - if (!(data->cur_trans->rx_buf)) + if (!data->cur_trans->rx_buf) return; if (bpw == 8) { - for (j = 0; j < (data->bpw_len); j++) { - rx_buf = data->cur_trans->rx_buf; - rx_buf[j] = (data->pkt_rx_buff[j]) & 0xFF; - } + rx_buf = data->cur_trans->rx_buf; + for (j = 0; j < data->bpw_len; j++) + *rx_buf++ = data->pkt_rx_buff[j] & 0xFF; } else { - for (j = 0; j < (data->bpw_len); j++) { - rx_sbuf = data->cur_trans->rx_buf; - rx_sbuf[j] = data->pkt_rx_buff[j]; - } + rx_sbuf = data->cur_trans->rx_buf; + for (j = 0; j < data->bpw_len; j++) + *rx_sbuf++ = data->pkt_rx_buff[j]; } } @@ -925,20 +746,20 @@ static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) static void pch_spi_process_messages(struct work_struct *pwork) { struct spi_message *pmsg; + struct pch_spi_data *data; int bpw; - struct pch_spi_data *data = - container_of(pwork, struct pch_spi_data, work); dev_dbg(&data->master->dev, "%s data initialized\n", __func__); + data = container_of(pwork, struct pch_spi_data, work); spin_lock(&data->lock); /* check if suspend has been initiated;if yes flush queue */ - if ((data->board_dat->suspend_sts) || - (data->status == STATUS_EXITING)) { + if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) { dev_dbg(&data->master->dev, "%s suspend/remove initiated,flushing queue\n", __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { pmsg->status = -EIO; @@ -961,8 +782,8 @@ static void pch_spi_process_messages(struct work_struct *pwork) "%s Set data->bcurrent_msg_processing= true\n", __func__); /* Get the message from the queue and delete it from there. */ - data->current_msg = - list_entry(data->queue.next, struct spi_message, queue); + data->current_msg = list_entry(data->queue.next, struct spi_message, + queue); list_del_init(&data->current_msg->queue); @@ -1044,7 +865,7 @@ static void pch_spi_process_messages(struct work_struct *pwork) spin_unlock(&data->lock); - } while ((data->cur_trans) != NULL); + } while (data->cur_trans != NULL); } static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) @@ -1063,14 +884,11 @@ static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) /* disable interrupts & free IRQ */ if (board_dat->irq_reg_sts) { /* disable interrupts */ - pch_spi_disable_interrupts(board_dat->data-> - master, PCH_ALL); - dev_dbg(&board_dat->pdev->dev, - "%s pch_spi_disable_interrupts invoked " - "successfully\n", __func__); + pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, + PCH_ALL); /* free IRQ */ - free_irq(board_dat->pdev->irq, (void *)board_dat); + free_irq(board_dat->pdev->irq, board_dat); dev_dbg(&board_dat->pdev->dev, "%s free_irq invoked successfully\n", __func__); @@ -1079,7 +897,7 @@ static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) } /* unmap PCI base address */ - if ((board_dat->data->io_remap_addr) != 0) { + if (board_dat->data->io_remap_addr != 0) { pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr); board_dat->data->io_remap_addr = 0; @@ -1104,26 +922,9 @@ static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) int retval; dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); - /* iniatize queue of pending messages */ - INIT_LIST_HEAD(&(board_dat->data->queue)); - - /* initialize spin locks */ - spin_lock_init(&(board_dat->data->lock)); - - /* set channel status */ - board_dat->data->status = STATUS_RUNNING; - - /* initialize work structure */ - INIT_WORK(&(board_dat->data->work), - pch_spi_process_messages); - - /* initialize wait queues */ - init_waitqueue_head(&(board_dat->data->wait)); - /* create workqueue */ board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME); - - if ((board_dat->data->wk) == NULL) { + if (!board_dat->data->wk) { dev_err(&board_dat->pdev->dev, "%s create_singlet hread_workqueue failed\n", __func__); retval = -EBUSY; @@ -1143,7 +944,6 @@ static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) board_dat->pci_req_sts = true; io_remap_addr = pci_iomap(board_dat->pdev, 1, 0); - if (io_remap_addr == 0) { dev_err(&board_dat->pdev->dev, "%s pci_iomap failed\n", __func__); @@ -1161,7 +961,7 @@ static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) /* register IRQ */ retval = request_irq(board_dat->pdev->irq, pch_spi_handler, - IRQF_SHARED, KBUILD_MODNAME, (void *)board_dat); + IRQF_SHARED, KBUILD_MODNAME, board_dat); if (retval != 0) { dev_err(&board_dat->pdev->dev, "%s request_irq failed\n", __func__); @@ -1172,8 +972,7 @@ static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) __func__, retval); board_dat->irq_reg_sts = true; - dev_dbg(&board_dat->pdev->dev, - "%s data->irq_reg_sts=true\n", __func__); + dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__); err_return: if (retval != 0) { @@ -1187,38 +986,6 @@ err_return: return retval; } -static int pch_spi_check_request_pending(struct pch_spi_board_data *board_dat) -{ - int sts; - u16 count; - - count = 500; - spin_lock(&(board_dat->data->lock)); - board_dat->data->status = STATUS_EXITING; - - while ((list_empty(&(board_dat->data->queue)) == 0) && - (--count)) { - dev_dbg(&board_dat->pdev->dev, - "%s :queue not empty\n", __func__); - spin_unlock(&(board_dat->data->lock)); - msleep(PCH_SLEEP_TIME); - spin_lock(&(board_dat->data->lock)); - } - - spin_unlock(&(board_dat->data->lock)); - - if (count) { - sts = 0; - dev_dbg(&board_dat->pdev->dev, "%s :queue empty\n", __func__); - } else { - sts = -EBUSY; - } - - dev_dbg(&board_dat->pdev->dev, "%s : EXIT=%d\n", __func__, sts); - - return sts; -} - static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -1279,12 +1046,17 @@ static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) board_dat->data->master = master; board_dat->data->n_curnt_chip = 255; board_dat->data->board_dat = board_dat; + board_dat->data->status = STATUS_RUNNING; + + INIT_LIST_HEAD(&board_dat->data->queue); + spin_lock_init(&board_dat->data->lock); + INIT_WORK(&board_dat->data->work, pch_spi_process_messages); + init_waitqueue_head(&board_dat->data->wait); /* allocate resources for PCH SPI */ retval = pch_spi_get_resources(board_dat); - if (retval != 0) { - dev_err(&pdev->dev, "%s fail(retval=%d)\n", - __func__, retval); + if (retval) { + dev_err(&pdev->dev, "%s fail(retval=%d)\n", __func__, retval); goto err_spi_get_resources; } @@ -1292,7 +1064,7 @@ static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) __func__, retval); /* save private data in dev */ - pci_set_drvdata(pdev, (void *)board_dat); + pci_set_drvdata(pdev, board_dat); dev_dbg(&pdev->dev, "%s invoked pci_set_drvdata\n", __func__); /* set master mode */ @@ -1329,6 +1101,7 @@ err_kmalloc: static void pch_spi_remove(struct pci_dev *pdev) { struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + int count; dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); @@ -1338,19 +1111,23 @@ static void pch_spi_remove(struct pci_dev *pdev) return; } - /* check for any pending messages */ - if ((-EBUSY) == pch_spi_check_request_pending(board_dat)) { - dev_dbg(&pdev->dev, - "%s pch_spi_check_request_pending returned" - " EBUSY\n", __func__); - /* no need to take any particular action; proceed with remove - even though queue is not empty */ + /* check for any pending messages; no action is taken if the queue + * is still full; but at least we tried. Unload anyway */ + count = 500; + spin_lock(&board_dat->data->lock); + board_dat->data->status = STATUS_EXITING; + while ((list_empty(&board_dat->data->queue) == 0) && --count) { + dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n", + __func__); + spin_unlock(&board_dat->data->lock); + msleep(PCH_SLEEP_TIME); + spin_lock(&board_dat->data->lock); } + spin_unlock(&board_dat->data->lock); /* Free resources allocated for PCH SPI */ pch_spi_free_resources(board_dat); - /* Unregister SPI master */ spi_unregister_master(board_dat->data->master); /* free memory for private data */ @@ -1401,13 +1178,11 @@ static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) /* Free IRQ */ if (board_dat->irq_reg_sts) { /* disable all interrupts */ - pch_spi_disable_interrupts(board_dat->data->master, PCH_ALL); + pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, + PCH_ALL); pch_spi_reset(board_dat->data->master); - dev_dbg(&pdev->dev, - "%s pch_spi_disable_interrupts invoked successfully\n", - __func__); - free_irq(board_dat->pdev->irq, (void *)board_dat); + free_irq(board_dat->pdev->irq, board_dat); board_dat->irq_reg_sts = false; dev_dbg(&pdev->dev, @@ -1471,7 +1246,7 @@ static int pch_spi_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3hot, 0); /* register IRQ handler */ - if (!(board->irq_reg_sts)) { + if (!board->irq_reg_sts) { /* register IRQ */ retval = request_irq(board->pdev->irq, pch_spi_handler, IRQF_SHARED, KBUILD_MODNAME, @@ -1518,7 +1293,6 @@ static int __init pch_spi_init(void) } module_init(pch_spi_init); - static void __exit pch_spi_exit(void) { pci_unregister_driver(&pch_spi_pcidev); @@ -1526,4 +1300,4 @@ static void __exit pch_spi_exit(void) module_exit(pch_spi_exit); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("PCH SPI PCI Driver"); +MODULE_DESCRIPTION("Topcliff PCH SPI PCI Driver"); -- cgit v0.10.2 From cdbc8f042f4f2568bb58ba8bd50d0692f3059417 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 8 Oct 2010 12:56:13 -0600 Subject: spi/topcliff: Tidy up Kconfig help text The original didn't specify Topcliff in the config prompt text. Signed-off-by: Grant Likely diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index b32167a..d966de1 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -299,12 +299,11 @@ config SPI_STMP3XXX SPI driver for Freescale STMP37xx/378x SoC SSP interface config SPI_TOPCLIFF_PCH - tristate "PCH SPI Controller" + tristate "Topcliff PCH SPI Controller" depends on PCI help - This driver is for PCH(Platform controller Hub) SPI of Topcliff which - is an IOH(Input/Output Hub) for x86 embedded processor. - This driver can access PCH SPI bus device. + SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus + used in some x86 embedded processors. config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" -- cgit v0.10.2 From b1b6b9aa6fd32db97469e65d301ebc32dcd67992 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 29 Sep 2010 17:31:35 +0900 Subject: spi/pl022: add PrimeCell generic DMA support This extends the PL022 SSP/SPI driver with generic DMA engine support using the PrimeCell DMA engine interface. Also fix up the test code for the U300 platform. Signed-off-by: Linus Walleij Signed-off-by: Grant Likely diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 8cdddc9..db0c679 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -27,7 +27,6 @@ /* * TODO: * - add timeout on polled transfers - * - add generic DMA framework support */ #include @@ -45,6 +44,9 @@ #include #include #include +#include +#include +#include /* * This macro is used to define some register default values. @@ -381,6 +383,14 @@ struct pl022 { enum ssp_reading read; enum ssp_writing write; u32 exp_fifo_level; + /* DMA settings */ +#ifdef CONFIG_DMA_ENGINE + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + struct sg_table sgt_rx; + struct sg_table sgt_tx; + char *dummypage; +#endif }; /** @@ -406,7 +416,7 @@ struct chip_data { u16 dmacr; u16 cpsr; u8 n_bytes; - u8 enable_dma:1; + bool enable_dma; enum ssp_reading read; enum ssp_writing write; void (*cs_control) (u32 command); @@ -763,6 +773,371 @@ static void *next_transfer(struct pl022 *pl022) } return STATE_DONE; } + +/* + * This DMA functionality is only compiled in if we have + * access to the generic DMA devices/DMA engine. + */ +#ifdef CONFIG_DMA_ENGINE +static void unmap_free_dma_scatter(struct pl022 *pl022) +{ + /* Unmap and free the SG tables */ + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, DMA_FROM_DEVICE); + sg_free_table(&pl022->sgt_rx); + sg_free_table(&pl022->sgt_tx); +} + +static void dma_callback(void *data) +{ + struct pl022 *pl022 = data; + struct spi_message *msg = pl022->cur_msg; + + BUG_ON(!pl022->sgt_rx.sgl); + +#ifdef VERBOSE_DEBUG + /* + * Optionally dump out buffers to inspect contents, this is + * good if you want to convince yourself that the loopback + * read/write contents are the same, when adopting to a new + * DMA engine. + */ + { + struct scatterlist *sg; + unsigned int i; + + dma_sync_sg_for_cpu(&pl022->adev->dev, + pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, + DMA_FROM_DEVICE); + + for_each_sg(pl022->sgt_rx.sgl, sg, pl022->sgt_rx.nents, i) { + dev_dbg(&pl022->adev->dev, "SPI RX SG ENTRY: %d", i); + print_hex_dump(KERN_ERR, "SPI RX: ", + DUMP_PREFIX_OFFSET, + 16, + 1, + sg_virt(sg), + sg_dma_len(sg), + 1); + } + for_each_sg(pl022->sgt_tx.sgl, sg, pl022->sgt_tx.nents, i) { + dev_dbg(&pl022->adev->dev, "SPI TX SG ENTRY: %d", i); + print_hex_dump(KERN_ERR, "SPI TX: ", + DUMP_PREFIX_OFFSET, + 16, + 1, + sg_virt(sg), + sg_dma_len(sg), + 1); + } + } +#endif + + unmap_free_dma_scatter(pl022); + + /* Update total bytes transfered */ + msg->actual_length += pl022->cur_transfer->len; + if (pl022->cur_transfer->cs_change) + pl022->cur_chip-> + cs_control(SSP_CHIP_DESELECT); + + /* Move to next transfer */ + msg->state = next_transfer(pl022); + tasklet_schedule(&pl022->pump_transfers); +} + +static void setup_dma_scatter(struct pl022 *pl022, + void *buffer, + unsigned int length, + struct sg_table *sgtab) +{ + struct scatterlist *sg; + int bytesleft = length; + void *bufp = buffer; + int mapbytes; + int i; + + if (buffer) { + for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { + /* + * If there are less bytes left than what fits + * in the current page (plus page alignment offset) + * we just feed in this, else we stuff in as much + * as we can. + */ + if (bytesleft < (PAGE_SIZE - offset_in_page(bufp))) + mapbytes = bytesleft; + else + mapbytes = PAGE_SIZE - offset_in_page(bufp); + sg_set_page(sg, virt_to_page(bufp), + mapbytes, offset_in_page(bufp)); + bufp += mapbytes; + bytesleft -= mapbytes; + dev_dbg(&pl022->adev->dev, + "set RX/TX target page @ %p, %d bytes, %d left\n", + bufp, mapbytes, bytesleft); + } + } else { + /* Map the dummy buffer on every page */ + for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { + if (bytesleft < PAGE_SIZE) + mapbytes = bytesleft; + else + mapbytes = PAGE_SIZE; + sg_set_page(sg, virt_to_page(pl022->dummypage), + mapbytes, 0); + bytesleft -= mapbytes; + dev_dbg(&pl022->adev->dev, + "set RX/TX to dummy page %d bytes, %d left\n", + mapbytes, bytesleft); + + } + } + BUG_ON(bytesleft); +} + +/** + * configure_dma - configures the channels for the next transfer + * @pl022: SSP driver's private data structure + */ +static int configure_dma(struct pl022 *pl022) +{ + struct dma_slave_config rx_conf = { + .src_addr = SSP_DR(pl022->phybase), + .direction = DMA_FROM_DEVICE, + .src_maxburst = pl022->vendor->fifodepth >> 1, + }; + struct dma_slave_config tx_conf = { + .dst_addr = SSP_DR(pl022->phybase), + .direction = DMA_TO_DEVICE, + .dst_maxburst = pl022->vendor->fifodepth >> 1, + }; + unsigned int pages; + int ret; + int sglen; + struct dma_chan *rxchan = pl022->dma_rx_channel; + struct dma_chan *txchan = pl022->dma_tx_channel; + struct dma_async_tx_descriptor *rxdesc; + struct dma_async_tx_descriptor *txdesc; + dma_cookie_t cookie; + + /* Check that the channels are available */ + if (!rxchan || !txchan) + return -ENODEV; + + switch (pl022->read) { + case READING_NULL: + /* Use the same as for writing */ + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; + break; + case READING_U8: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case READING_U16: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case READING_U32: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + } + + switch (pl022->write) { + case WRITING_NULL: + /* Use the same as for reading */ + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; + break; + case WRITING_U8: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case WRITING_U16: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case WRITING_U32: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;; + break; + } + + /* SPI pecularity: we need to read and write the same width */ + if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) + rx_conf.src_addr_width = tx_conf.dst_addr_width; + if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) + tx_conf.dst_addr_width = rx_conf.src_addr_width; + BUG_ON(rx_conf.src_addr_width != tx_conf.dst_addr_width); + + rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, + (unsigned long) &rx_conf); + txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, + (unsigned long) &tx_conf); + + /* Create sglists for the transfers */ + pages = (pl022->cur_transfer->len >> PAGE_SHIFT) + 1; + dev_dbg(&pl022->adev->dev, "using %d pages for transfer\n", pages); + + ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_KERNEL); + if (ret) + goto err_alloc_rx_sg; + + ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_KERNEL); + if (ret) + goto err_alloc_tx_sg; + + /* Fill in the scatterlists for the RX+TX buffers */ + setup_dma_scatter(pl022, pl022->rx, + pl022->cur_transfer->len, &pl022->sgt_rx); + setup_dma_scatter(pl022, pl022->tx, + pl022->cur_transfer->len, &pl022->sgt_tx); + + /* Map DMA buffers */ + sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, DMA_FROM_DEVICE); + if (!sglen) + goto err_rx_sgmap; + + sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); + if (!sglen) + goto err_tx_sgmap; + + /* Send both scatterlists */ + rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, + DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!rxdesc) + goto err_rxdesc; + + txdesc = txchan->device->device_prep_slave_sg(txchan, + pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, + DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!txdesc) + goto err_txdesc; + + /* Put the callback on the RX transfer only, that should finish last */ + rxdesc->callback = dma_callback; + rxdesc->callback_param = pl022; + + /* Submit and fire RX and TX with TX last so we're ready to read! */ + cookie = rxdesc->tx_submit(rxdesc); + if (dma_submit_error(cookie)) + goto err_submit_rx; + cookie = txdesc->tx_submit(txdesc); + if (dma_submit_error(cookie)) + goto err_submit_tx; + rxchan->device->device_issue_pending(rxchan); + txchan->device->device_issue_pending(txchan); + + return 0; + +err_submit_tx: +err_submit_rx: +err_txdesc: + txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); +err_rxdesc: + rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); +err_tx_sgmap: + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_tx.nents, DMA_FROM_DEVICE); +err_rx_sgmap: + sg_free_table(&pl022->sgt_tx); +err_alloc_tx_sg: + sg_free_table(&pl022->sgt_rx); +err_alloc_rx_sg: + return -ENOMEM; +} + +static int __init pl022_dma_probe(struct pl022 *pl022) +{ + dma_cap_mask_t mask; + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + /* + * We need both RX and TX channels to do DMA, else do none + * of them. + */ + pl022->dma_rx_channel = dma_request_channel(mask, + pl022->master_info->dma_filter, + pl022->master_info->dma_rx_param); + if (!pl022->dma_rx_channel) { + dev_err(&pl022->adev->dev, "no RX DMA channel!\n"); + goto err_no_rxchan; + } + + pl022->dma_tx_channel = dma_request_channel(mask, + pl022->master_info->dma_filter, + pl022->master_info->dma_tx_param); + if (!pl022->dma_tx_channel) { + dev_err(&pl022->adev->dev, "no TX DMA channel!\n"); + goto err_no_txchan; + } + + pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!pl022->dummypage) { + dev_err(&pl022->adev->dev, "no DMA dummypage!\n"); + goto err_no_dummypage; + } + + dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n", + dma_chan_name(pl022->dma_rx_channel), + dma_chan_name(pl022->dma_tx_channel)); + + return 0; + +err_no_dummypage: + dma_release_channel(pl022->dma_tx_channel); +err_no_txchan: + dma_release_channel(pl022->dma_rx_channel); + pl022->dma_rx_channel = NULL; +err_no_rxchan: + return -ENODEV; +} + +static void terminate_dma(struct pl022 *pl022) +{ + struct dma_chan *rxchan = pl022->dma_rx_channel; + struct dma_chan *txchan = pl022->dma_tx_channel; + + rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); + txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); + unmap_free_dma_scatter(pl022); +} + +static void pl022_dma_remove(struct pl022 *pl022) +{ + if (pl022->busy) + terminate_dma(pl022); + if (pl022->dma_tx_channel) + dma_release_channel(pl022->dma_tx_channel); + if (pl022->dma_rx_channel) + dma_release_channel(pl022->dma_rx_channel); + kfree(pl022->dummypage); +} + +#else +static inline int configure_dma(struct pl022 *pl022) +{ + return -ENODEV; +} + +static inline int pl022_dma_probe(struct pl022 *pl022) +{ + return 0; +} + +static inline void pl022_dma_remove(struct pl022 *pl022) +{ +} +#endif + /** * pl022_interrupt_handler - Interrupt handler for SSP controller * @@ -794,14 +1169,17 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) if (unlikely(!irq_status)) return IRQ_NONE; - /* This handles the error code interrupts */ + /* + * This handles the FIFO interrupts, the timeout + * interrupts are flatly ignored, they cannot be + * trusted. + */ if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { /* * Overrun interrupt - bail out since our Data has been * corrupted */ - dev_err(&pl022->adev->dev, - "FIFO overrun\n"); + dev_err(&pl022->adev->dev, "FIFO overrun\n"); if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) dev_err(&pl022->adev->dev, "RXFIFO is full\n"); @@ -896,8 +1274,8 @@ static int set_up_next_transfer(struct pl022 *pl022, } /** - * pump_transfers - Tasklet function which schedules next interrupt transfer - * when running in interrupt transfer mode. + * pump_transfers - Tasklet function which schedules next transfer + * when running in interrupt or DMA transfer mode. * @data: SSP driver private data structure * */ @@ -954,65 +1332,23 @@ static void pump_transfers(unsigned long data) } /* Flush the FIFOs and let's go! */ flush(pl022); - writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); -} - -/** - * NOT IMPLEMENTED - * configure_dma - It configures the DMA pipes for DMA transfers - * @data: SSP driver's private data structure - * - */ -static int configure_dma(void *data) -{ - struct pl022 *pl022 = data; - dev_dbg(&pl022->adev->dev, "configure DMA\n"); - return -ENOTSUPP; -} - -/** - * do_dma_transfer - It handles transfers of the current message - * if it is DMA xfer. - * NOT FULLY IMPLEMENTED - * @data: SSP driver's private data structure - */ -static void do_dma_transfer(void *data) -{ - struct pl022 *pl022 = data; - - if (configure_dma(data)) { - dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n"); - goto err_config_dma; - } - /* TODO: Implememt DMA setup of pipes here */ - - /* Enable target chip, set up transfer */ - pl022->cur_chip->cs_control(SSP_CHIP_SELECT); - if (set_up_next_transfer(pl022, pl022->cur_transfer)) { - /* Error path */ - pl022->cur_msg->state = STATE_ERROR; - pl022->cur_msg->status = -EIO; - giveback(pl022); + if (pl022->cur_chip->enable_dma) { + if (configure_dma(pl022)) { + dev_dbg(&pl022->adev->dev, + "configuration of DMA failed, fall back to interrupt mode\n"); + goto err_config_dma; + } return; } - /* Enable SSP */ - writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), - SSP_CR1(pl022->virtbase)); - - /* TODO: Enable the DMA transfer here */ - return; - err_config_dma: - pl022->cur_msg->state = STATE_ERROR; - pl022->cur_msg->status = -EIO; - giveback(pl022); - return; +err_config_dma: + writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); } -static void do_interrupt_transfer(void *data) +static void do_interrupt_dma_transfer(struct pl022 *pl022) { - struct pl022 *pl022 = data; + u32 irqflags = ENABLE_ALL_INTERRUPTS; /* Enable target chip */ pl022->cur_chip->cs_control(SSP_CHIP_SELECT); @@ -1023,15 +1359,26 @@ static void do_interrupt_transfer(void *data) giveback(pl022); return; } + /* If we're using DMA, set up DMA here */ + if (pl022->cur_chip->enable_dma) { + /* Configure DMA transfer */ + if (configure_dma(pl022)) { + dev_dbg(&pl022->adev->dev, + "configuration of DMA failed, fall back to interrupt mode\n"); + goto err_config_dma; + } + /* Disable interrupts in DMA mode, IRQ from DMA controller */ + irqflags = DISABLE_ALL_INTERRUPTS; + } +err_config_dma: /* Enable SSP, turn on interrupts */ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase)); - writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); + writew(irqflags, SSP_IMSC(pl022->virtbase)); } -static void do_polling_transfer(void *data) +static void do_polling_transfer(struct pl022 *pl022) { - struct pl022 *pl022 = data; struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; @@ -1101,7 +1448,7 @@ static void do_polling_transfer(void *data) * * This function checks if there is any spi message in the queue that * needs processing and delegate control to appropriate function - * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer() + * do_polling_transfer()/do_interrupt_dma_transfer() * based on the kind of the transfer * */ @@ -1150,10 +1497,8 @@ static void pump_messages(struct work_struct *work) if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) do_polling_transfer(pl022); - else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER) - do_interrupt_transfer(pl022); else - do_dma_transfer(pl022); + do_interrupt_dma_transfer(pl022); } @@ -1469,23 +1814,6 @@ static int calculate_effective_freq(struct pl022 *pl022, } /** - * NOT IMPLEMENTED - * process_dma_info - Processes the DMA info provided by client drivers - * @chip_info: chip info provided by client device - * @chip: Runtime state maintained by the SSP controller for each spi device - * - * This function processes and stores DMA config provided by client driver - * into the runtime state maintained by the SSP controller driver - */ -static int process_dma_info(struct pl022_config_chip *chip_info, - struct chip_data *chip) -{ - dev_err(chip_info->dev, - "cannot process DMA info, DMA not implemented!\n"); - return -ENOTSUPP; -} - -/** * pl022_setup - setup function registered to SPI master framework * @spi: spi device which is requesting setup * @@ -1552,8 +1880,6 @@ static int pl022_setup(struct spi_device *spi) dev_dbg(&spi->dev, "allocated memory for controller data\n"); - /* Pointer back to the SPI device */ - chip_info->dev = &spi->dev; /* * Set controller data default values: * Polling is supported by default @@ -1579,6 +1905,9 @@ static int pl022_setup(struct spi_device *spi) "using user supplied controller_data settings\n"); } + /* Pointer back to the SPI device */ + chip_info->dev = &spi->dev; + /* * We can override with custom divisors, else we use the board * frequency setting @@ -1637,9 +1966,8 @@ static int pl022_setup(struct spi_device *spi) chip->cpsr = 0; if ((chip_info->com_mode == DMA_TRANSFER) && ((pl022->master_info)->enable_dma)) { - chip->enable_dma = 1; + chip->enable_dma = true; dev_dbg(&spi->dev, "DMA mode set in controller state\n"); - status = process_dma_info(chip_info, chip); if (status < 0) goto err_config_params; SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, @@ -1647,7 +1975,7 @@ static int pl022_setup(struct spi_device *spi) SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, SSP_DMACR_MASK_TXDMAE, 1); } else { - chip->enable_dma = 0; + chip->enable_dma = false; dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0); @@ -1773,6 +2101,7 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) if (status) goto err_no_ioregion; + pl022->phybase = adev->res.start; pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); if (pl022->virtbase == NULL) { status = -ENOMEM; @@ -1799,6 +2128,14 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); goto err_no_irq; } + + /* Get DMA channels */ + if (platform_info->enable_dma) { + status = pl022_dma_probe(pl022); + if (status != 0) + goto err_no_dma; + } + /* Initialize and start queue */ status = init_queue(pl022); if (status != 0) { @@ -1827,6 +2164,8 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) err_start_queue: err_init_queue: destroy_queue(pl022); + pl022_dma_remove(pl022); + err_no_dma: free_irq(adev->irq[0], pl022); err_no_irq: clk_put(pl022->clk); @@ -1857,6 +2196,7 @@ pl022_remove(struct amba_device *adev) return status; } load_ssp_default_config(pl022); + pl022_dma_remove(pl022); free_irq(adev->irq[0], pl022); clk_disable(pl022->clk); clk_put(pl022->clk); diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index abf26cc..db6a191 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -228,6 +228,7 @@ enum ssp_chip_select { }; +struct dma_chan; /** * struct pl022_ssp_master - device.platform_data for SPI controller devices. * @num_chipselect: chipselects are used to distinguish individual @@ -235,11 +236,16 @@ enum ssp_chip_select { * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. * @enable_dma: if true enables DMA driven transfers. + * @dma_rx_param: parameter to locate an RX DMA channel. + * @dma_tx_param: parameter to locate a TX DMA channel. */ struct pl022_ssp_controller { u16 bus_id; u8 num_chipselect; u8 enable_dma:1; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); + void *dma_rx_param; + void *dma_tx_param; }; /** -- cgit v0.10.2 From fadcf49b9bd7ec5fb69befbf477e747d5b6a0328 Mon Sep 17 00:00:00 2001 From: matt mooney Date: Fri, 24 Sep 2010 12:17:32 -0700 Subject: spi: change to new flag variable Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney Signed-off-by: Grant Likely diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 65a232d..f32d11e 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -2,9 +2,7 @@ # Makefile for kernel SPI drivers. # -ifeq ($(CONFIG_SPI_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG # small core, mostly translating board-specific # config declarations into driver model code -- cgit v0.10.2 From bde435a9ca376d0b7809768ca803dbf14416b9c1 Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Thu, 16 Sep 2010 06:18:50 -0700 Subject: spi/pl022: Add spi->mode support to AMBA SPI driver This patch adds spi->mode support for the AMBA pl022 driver and allows spidev to correctly alter SPI modes. Unused fields used in the pl022 header file for the pl022_config_chip have been removed. The ab8500 client driver selects the data transfer size instead of the platform data. For platforms that use the amba pl022 driver, the unused fields in the controller data structure have been removed and the .mode field in the SPI board info structure is used instead. Signed-off-by: Kevin Wells Tested-by: Linus Walleij Acked-by: Linus Walleij Signed-off-by: Grant Likely diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bc9a42d..0c936cf 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -172,18 +172,12 @@ static void phy3250_spi_cs_set(u32 control) } static struct pl022_config_chip spi0_chip_info = { - .lbm = LOOPBACK_DISABLED, .com_mode = INTERRUPT_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, .hierarchy = SSP_MASTER, .slave_tx_disable = 0, - .endian_tx = SSP_TX_LSB, - .endian_rx = SSP_RX_LSB, - .data_size = SSP_DATA_BITS_8, .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_FIRST_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_8, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, @@ -239,6 +233,7 @@ static int __init phy3250_spi_board_register(void) .max_speed_hz = 5000000, .bus_num = 0, .chip_select = 0, + .mode = SPI_MODE_0, .platform_data = &eeprom, .controller_data = &spi0_chip_info, }, diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 5f55012..03f7936 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -46,7 +46,6 @@ static ssize_t dummy_looptest(struct device *dev, * struct, this is just used here to alter the behaviour of the chip * in order to perform tests. */ - struct pl022_config_chip *chip_info = spi->controller_data; int status; u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD, 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05, @@ -72,7 +71,7 @@ static ssize_t dummy_looptest(struct device *dev, * Force chip to 8 bit mode * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! */ - chip_info->data_size = SSP_DATA_BITS_8; + spi->bits_per_word = 8; /* You should NOT DO THIS EITHER */ spi->master->setup(spi); @@ -159,7 +158,7 @@ static ssize_t dummy_looptest(struct device *dev, * Force chip to 16 bit mode * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! */ - chip_info->data_size = SSP_DATA_BITS_16; + spi->bits_per_word = 16; /* You should NOT DO THIS EITHER */ spi->master->setup(spi); diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index f0e887b..edb2c0d 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -30,8 +30,6 @@ static void select_dummy_chip(u32 chipselect) } struct pl022_config_chip dummy_chip_info = { - /* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */ - .lbm = LOOPBACK_ENABLED, /* * available POLLING_TRANSFER and INTERRUPT_TRANSFER, * DMA_TRANSFER does not work @@ -42,14 +40,8 @@ struct pl022_config_chip dummy_chip_info = { .hierarchy = SSP_MASTER, /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ .slave_tx_disable = 0, - /* LSB first */ - .endian_tx = SSP_TX_LSB, - .endian_rx = SSP_RX_LSB, - .data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_SECOND_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, @@ -75,7 +67,7 @@ static struct spi_board_info u300_spi_devices[] = { .bus_num = 0, /* Only one bus on this chip */ .chip_select = 0, /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = 0, + .mode = SPI_MODE_1 | SPI_LSB_FIRST | SPI_LOOP, }, #endif }; diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 0e8fd13..219ae0c 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -55,19 +55,13 @@ static void ab4500_spi_cs_control(u32 command) } struct pl022_config_chip ab4500_chip_info = { - .lbm = LOOPBACK_DISABLED, .com_mode = INTERRUPT_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, /* we can act as master only */ .hierarchy = SSP_MASTER, .slave_tx_disable = 0, - .endian_rx = SSP_RX_MSB, - .endian_tx = SSP_TX_MSB, - .data_size = SSP_DATA_BITS_24, .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_SECOND_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_HIGH, .cs_control = ab4500_spi_cs_control, }; @@ -83,7 +77,7 @@ static struct spi_board_info u8500_spi_devices[] = { .max_speed_hz = 12000000, .bus_num = 0, .chip_select = 0, - .mode = SPI_MODE_0, + .mode = SPI_MODE_3, .irq = IRQ_DB8500_AB8500, }, }; diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c index e1c8b62..01b6d58 100644 --- a/drivers/mfd/ab8500-spi.c +++ b/drivers/mfd/ab8500-spi.c @@ -83,6 +83,11 @@ static int __devinit ab8500_spi_probe(struct spi_device *spi) struct ab8500 *ab8500; int ret; + spi->bits_per_word = 24; + ret = spi_setup(spi); + if (ret < 0) + return ret; + ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL); if (!ab8500) return -ENOMEM; diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index db0c679..59c90f3 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1595,12 +1595,6 @@ static int destroy_queue(struct pl022 *pl022) static int verify_controller_parameters(struct pl022 *pl022, struct pl022_config_chip *chip_info) { - if ((chip_info->lbm != LOOPBACK_ENABLED) - && (chip_info->lbm != LOOPBACK_DISABLED)) { - dev_err(chip_info->dev, - "loopback Mode is configured incorrectly\n"); - return -EINVAL; - } if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { dev_err(chip_info->dev, @@ -1626,24 +1620,6 @@ static int verify_controller_parameters(struct pl022 *pl022, "cpsdvsr is configured incorrectly\n"); return -EINVAL; } - if ((chip_info->endian_rx != SSP_RX_MSB) - && (chip_info->endian_rx != SSP_RX_LSB)) { - dev_err(chip_info->dev, - "RX FIFO endianess is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->endian_tx != SSP_TX_MSB) - && (chip_info->endian_tx != SSP_TX_LSB)) { - dev_err(chip_info->dev, - "TX FIFO endianess is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->data_size < SSP_DATA_BITS_4) - || (chip_info->data_size > SSP_DATA_BITS_32)) { - dev_err(chip_info->dev, - "DATA Size is configured incorrectly\n"); - return -EINVAL; - } if ((chip_info->com_mode != INTERRUPT_TRANSFER) && (chip_info->com_mode != DMA_TRANSFER) && (chip_info->com_mode != POLLING_TRANSFER)) { @@ -1663,20 +1639,6 @@ static int verify_controller_parameters(struct pl022 *pl022, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } - if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) { - if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE) - && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) { - dev_err(chip_info->dev, - "Clock Phase is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW) - && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) { - dev_err(chip_info->dev, - "Clock Polarity is configured incorrectly\n"); - return -EINVAL; - } - } if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { if ((chip_info->ctrl_len < SSP_BITS_4) || (chip_info->ctrl_len > SSP_BITS_32)) { @@ -1825,23 +1787,14 @@ static int calculate_effective_freq(struct pl022 *pl022, * controller hardware here, that is not done until the actual transfer * commence. */ - -/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */ -#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ - | SPI_LSB_FIRST | SPI_LOOP) - static int pl022_setup(struct spi_device *spi) { struct pl022_config_chip *chip_info; struct chip_data *chip; int status = 0; struct pl022 *pl022 = spi_master_get_devdata(spi->master); - - if (spi->mode & ~MODEBITS) { - dev_dbg(&spi->dev, "unsupported mode bits %x\n", - spi->mode & ~MODEBITS); - return -EINVAL; - } + unsigned int bits = spi->bits_per_word; + u32 tmp; if (!spi->max_speed_hz) return -EINVAL; @@ -1884,18 +1837,12 @@ static int pl022_setup(struct spi_device *spi) * Set controller data default values: * Polling is supported by default */ - chip_info->lbm = LOOPBACK_DISABLED; chip_info->com_mode = POLLING_TRANSFER; chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI; chip_info->hierarchy = SSP_SLAVE; chip_info->slave_tx_disable = DO_NOT_DRIVE_TX; - chip_info->endian_tx = SSP_TX_LSB; - chip_info->endian_rx = SSP_RX_LSB; - chip_info->data_size = SSP_DATA_BITS_12; chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; - chip_info->clk_phase = SSP_CLK_SECOND_EDGE; - chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW; chip_info->ctrl_len = SSP_BITS_8; chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX; @@ -1933,12 +1880,16 @@ static int pl022_setup(struct spi_device *spi) chip->xfer_type = chip_info->com_mode; chip->cs_control = chip_info->cs_control; - if (chip_info->data_size <= 8) { - dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n"); + if (bits <= 3) { + /* PL022 doesn't support less than 4-bits */ + status = -ENOTSUPP; + goto err_config_params; + } else if (bits <= 8) { + dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); chip->n_bytes = 1; chip->read = READING_U8; chip->write = WRITING_U8; - } else if (chip_info->data_size <= 16) { + } else if (bits <= 16) { dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); chip->n_bytes = 2; chip->read = READING_U16; @@ -1955,6 +1906,7 @@ static int pl022_setup(struct spi_device *spi) dev_err(&spi->dev, "a standard pl022 can only handle " "1 <= n <= 16 bit words\n"); + status = -ENOTSUPP; goto err_config_params; } } @@ -1987,6 +1939,8 @@ static int pl022_setup(struct spi_device *spi) /* Special setup for the ST micro extended control registers */ if (pl022->vendor->extended_cr) { + u32 etx; + if (pl022->vendor->pl023) { /* These bits are only in the PL023 */ SSP_WRITE_BITS(chip->cr1, chip_info->clkdelay, @@ -2002,29 +1956,51 @@ static int pl022_setup(struct spi_device *spi) SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT_ST, 6); } - SSP_WRITE_BITS(chip->cr0, chip_info->data_size, + SSP_WRITE_BITS(chip->cr0, bits - 1, SSP_CR0_MASK_DSS_ST, 0); - SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, - SSP_CR1_MASK_RENDN_ST, 4); - SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, - SSP_CR1_MASK_TENDN_ST, 5); + + if (spi->mode & SPI_LSB_FIRST) { + tmp = SSP_RX_LSB; + etx = SSP_TX_LSB; + } else { + tmp = SSP_RX_MSB; + etx = SSP_TX_MSB; + } + SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_RENDN_ST, 4); + SSP_WRITE_BITS(chip->cr1, etx, SSP_CR1_MASK_TENDN_ST, 5); SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL_ST, 7); SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL_ST, 10); } else { - SSP_WRITE_BITS(chip->cr0, chip_info->data_size, + SSP_WRITE_BITS(chip->cr0, bits - 1, SSP_CR0_MASK_DSS, 0); SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 4); } + /* Stuff that is common for all versions */ - SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6); - SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7); + if (spi->mode & SPI_CPOL) + tmp = SSP_CLK_POL_IDLE_HIGH; + else + tmp = SSP_CLK_POL_IDLE_LOW; + SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPO, 6); + + if (spi->mode & SPI_CPHA) + tmp = SSP_CLK_SECOND_EDGE; + else + tmp = SSP_CLK_FIRST_EDGE; + SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPH, 7); + SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8); /* Loopback is available on all versions except PL023 */ - if (!pl022->vendor->pl023) - SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0); + if (!pl022->vendor->pl023) { + if (spi->mode & SPI_LOOP) + tmp = LOOPBACK_ENABLED; + else + tmp = LOOPBACK_DISABLED; + SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_LBM, 0); + } SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); @@ -2033,6 +2009,7 @@ static int pl022_setup(struct spi_device *spi) spi_set_ctldata(spi, chip); return status; err_config_params: + spi_set_ctldata(spi, NULL); err_first_setup: kfree(chip); return status; @@ -2095,6 +2072,14 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) master->setup = pl022_setup; master->transfer = pl022_transfer; + /* + * Supports mode 0-3, loopback, and active low CS. Transfers are + * always MS bit first on the original pl022. + */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; + if (pl022->vendor->extended_cr) + master->mode_bits |= SPI_LSB_FIRST; + dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); status = amba_request_regions(adev, NULL); diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index db6a191..bf14366 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -277,19 +277,13 @@ struct pl022_ssp_controller { */ struct pl022_config_chip { struct device *dev; - enum ssp_loopback lbm; enum ssp_interface iface; enum ssp_hierarchy hierarchy; bool slave_tx_disable; struct ssp_clock_params clk_freq; - enum ssp_rx_endian endian_rx; - enum ssp_tx_endian endian_tx; - enum ssp_data_size data_size; enum ssp_mode com_mode; enum ssp_rx_level_trig rx_lev_trig; enum ssp_tx_level_trig tx_lev_trig; - enum ssp_spi_clk_phase clk_phase; - enum ssp_spi_clk_pol clk_pol; enum ssp_microwire_ctrl_len ctrl_len; enum ssp_microwire_wait_state wait_state; enum ssp_duplex duplex; -- cgit v0.10.2 From 5a1c98be1de165c8ad1bd5343a5d779230669489 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Oct 2010 11:47:32 +0200 Subject: spi/pl022: get rid of chipinfo dev pointer What is the dev pointer doing inside the platform data anyway. We have another pointer to the actual device at hand, use that. Signed-off-by: Linus Walleij Signed-off-by: Grant Likely diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 59c90f3..19d54aa 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1597,58 +1597,58 @@ static int verify_controller_parameters(struct pl022 *pl022, { if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "interface is configured incorrectly\n"); return -EINVAL; } if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && (!pl022->vendor->unidir)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "unidirectional mode not supported in this " "hardware version\n"); return -EINVAL; } if ((chip_info->hierarchy != SSP_MASTER) && (chip_info->hierarchy != SSP_SLAVE)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "hierarchy is configured incorrectly\n"); return -EINVAL; } if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN) || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "cpsdvsr is configured incorrectly\n"); return -EINVAL; } if ((chip_info->com_mode != INTERRUPT_TRANSFER) && (chip_info->com_mode != DMA_TRANSFER) && (chip_info->com_mode != POLLING_TRANSFER)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Communication mode is configured incorrectly\n"); return -EINVAL; } if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { if ((chip_info->ctrl_len < SSP_BITS_4) || (chip_info->ctrl_len > SSP_BITS_32)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "CTRL LEN is configured incorrectly\n"); return -EINVAL; } if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Wait State is configured incorrectly\n"); return -EINVAL; } @@ -1658,13 +1658,13 @@ static int verify_controller_parameters(struct pl022 *pl022, SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) && (chip_info->duplex != SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Microwire duplex mode is configured incorrectly\n"); return -EINVAL; } } else { if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Microwire half duplex mode requested," " but this is only available in the" " ST version of PL022\n"); @@ -1672,7 +1672,7 @@ static int verify_controller_parameters(struct pl022 *pl022, } } if (chip_info->cs_control == NULL) { - dev_warn(chip_info->dev, + dev_warn(&pl022->adev->dev, "Chip Select Function is NULL for this chip\n"); chip_info->cs_control = null_cs_control; } @@ -1852,9 +1852,6 @@ static int pl022_setup(struct spi_device *spi) "using user supplied controller_data settings\n"); } - /* Pointer back to the SPI device */ - chip_info->dev = &spi->dev; - /* * We can override with custom divisors, else we use the board * frequency setting diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index bf14366..4ce98f5 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -276,7 +276,6 @@ struct pl022_ssp_controller { * @dma_config: DMA configuration for SSP controller and peripheral */ struct pl022_config_chip { - struct device *dev; enum ssp_interface iface; enum ssp_hierarchy hierarchy; bool slave_tx_disable; -- cgit v0.10.2 From f9d629c737cb6687216a0c540b5466a4bd8b070a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Oct 2010 13:33:13 +0200 Subject: spi/pl022: fix dubious allocation staticize platform data This removes some dubious allocation of a local chipinfo struct in favor of a constant preset, tagging that one const revealed further problems with platform data being modified so fixed up these too. Reported-by: Virupax Sadashivpetimath Signed-off-by: Linus Walleij Signed-off-by: Grant Likely diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 19d54aa..fb3d1b3 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1593,7 +1593,7 @@ static int destroy_queue(struct pl022 *pl022) } static int verify_controller_parameters(struct pl022 *pl022, - struct pl022_config_chip *chip_info) + struct pl022_config_chip const *chip_info) { if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { @@ -1614,12 +1614,6 @@ static int verify_controller_parameters(struct pl022 *pl022, "hierarchy is configured incorrectly\n"); return -EINVAL; } - if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN) - || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) { - dev_err(&pl022->adev->dev, - "cpsdvsr is configured incorrectly\n"); - return -EINVAL; - } if ((chip_info->com_mode != INTERRUPT_TRANSFER) && (chip_info->com_mode != DMA_TRANSFER) && (chip_info->com_mode != POLLING_TRANSFER)) { @@ -1671,11 +1665,6 @@ static int verify_controller_parameters(struct pl022 *pl022, return -EINVAL; } } - if (chip_info->cs_control == NULL) { - dev_warn(&pl022->adev->dev, - "Chip Select Function is NULL for this chip\n"); - chip_info->cs_control = null_cs_control; - } return 0; } @@ -1775,6 +1764,25 @@ static int calculate_effective_freq(struct pl022 *pl022, return 0; } + +/* + * A piece of default chip info unless the platform + * supplies it. + */ +static const struct pl022_config_chip pl022_default_chip_info = { + .com_mode = POLLING_TRANSFER, + .iface = SSP_INTERFACE_MOTOROLA_SPI, + .hierarchy = SSP_SLAVE, + .slave_tx_disable = DO_NOT_DRIVE_TX, + .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .ctrl_len = SSP_BITS_8, + .wait_state = SSP_MWIRE_WAIT_ZERO, + .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, + .cs_control = null_cs_control, +}; + + /** * pl022_setup - setup function registered to SPI master framework * @spi: spi device which is requesting setup @@ -1789,8 +1797,9 @@ static int calculate_effective_freq(struct pl022 *pl022, */ static int pl022_setup(struct spi_device *spi) { - struct pl022_config_chip *chip_info; + struct pl022_config_chip const *chip_info; struct chip_data *chip; + struct ssp_clock_params clk_freq; int status = 0; struct pl022 *pl022 = spi_master_get_devdata(spi->master); unsigned int bits = spi->bits_per_word; @@ -1817,40 +1826,13 @@ static int pl022_setup(struct spi_device *spi) chip_info = spi->controller_data; if (chip_info == NULL) { + chip_info = &pl022_default_chip_info; /* spi_board_info.controller_data not is supplied */ dev_dbg(&spi->dev, "using default controller_data settings\n"); - - chip_info = - kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL); - - if (!chip_info) { - dev_err(&spi->dev, - "cannot allocate controller data\n"); - status = -ENOMEM; - goto err_first_setup; - } - - dev_dbg(&spi->dev, "allocated memory for controller data\n"); - - /* - * Set controller data default values: - * Polling is supported by default - */ - chip_info->com_mode = POLLING_TRANSFER; - chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI; - chip_info->hierarchy = SSP_SLAVE; - chip_info->slave_tx_disable = DO_NOT_DRIVE_TX; - chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; - chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; - chip_info->ctrl_len = SSP_BITS_8; - chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; - chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX; - chip_info->cs_control = null_cs_control; - } else { + } else dev_dbg(&spi->dev, "using user supplied controller_data settings\n"); - } /* * We can override with custom divisors, else we use the board @@ -1860,22 +1842,37 @@ static int pl022_setup(struct spi_device *spi) && (0 == chip_info->clk_freq.scr)) { status = calculate_effective_freq(pl022, spi->max_speed_hz, - &chip_info->clk_freq); + &clk_freq); if (status < 0) goto err_config_params; } else { - if ((chip_info->clk_freq.cpsdvsr % 2) != 0) - chip_info->clk_freq.cpsdvsr = - chip_info->clk_freq.cpsdvsr - 1; + memcpy(&clk_freq, &chip_info->clk_freq, sizeof(clk_freq)); + if ((clk_freq.cpsdvsr % 2) != 0) + clk_freq.cpsdvsr = + clk_freq.cpsdvsr - 1; } + if ((clk_freq.cpsdvsr < CPSDVR_MIN) + || (clk_freq.cpsdvsr > CPSDVR_MAX)) { + dev_err(&spi->dev, + "cpsdvsr is configured incorrectly\n"); + goto err_config_params; + } + + status = verify_controller_parameters(pl022, chip_info); if (status) { dev_err(&spi->dev, "controller data is incorrect"); goto err_config_params; } + /* Now set controller state based on controller data */ chip->xfer_type = chip_info->com_mode; - chip->cs_control = chip_info->cs_control; + if (!chip_info->cs_control) { + chip->cs_control = null_cs_control; + dev_warn(&spi->dev, + "chip select function is NULL for this chip\n"); + } else + chip->cs_control = chip_info->cs_control; if (bits <= 3) { /* PL022 doesn't support less than 4-bits */ @@ -1932,7 +1929,7 @@ static int pl022_setup(struct spi_device *spi) SSP_DMACR_MASK_TXDMAE, 1); } - chip->cpsr = chip_info->clk_freq.cpsdvsr; + chip->cpsr = clk_freq.cpsdvsr; /* Special setup for the ST micro extended control registers */ if (pl022->vendor->extended_cr) { @@ -1989,7 +1986,7 @@ static int pl022_setup(struct spi_device *spi) tmp = SSP_CLK_FIRST_EDGE; SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPH, 7); - SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8); + SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8); /* Loopback is available on all versions except PL023 */ if (!pl022->vendor->pl023) { if (spi->mode & SPI_LOOP) @@ -2007,7 +2004,6 @@ static int pl022_setup(struct spi_device *spi) return status; err_config_params: spi_set_ctldata(spi, NULL); - err_first_setup: kfree(chip); return status; } -- cgit v0.10.2 From 3272029fb33a88873b9b02224ebeb23bf3a4668e Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Tue, 12 Oct 2010 18:18:30 +0800 Subject: spi/mpc8xxx: rename spi_mpc8xxx.c to spi_fsl_spi.c This will pave the way to refactor out the common code which can be used by the eSPI controller driver, and rename the SPI controller dirver to the file spi_fsl_spi.c. Signed-off-by: Mingkai Hu Signed-off-by: Grant Likely diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d966de1..e8f02a6 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -182,12 +182,13 @@ config SPI_MPC512x_PSC This enables using the Freescale MPC5121 Programmable Serial Controller in SPI master mode. -config SPI_MPC8xxx - tristate "Freescale MPC8xxx SPI controller" +config SPI_FSL_SPI + tristate "Freescale SPI controller" depends on FSL_SOC help - This enables using the Freescale MPC8xxx SPI controllers in master - mode. + This enables using the Freescale SPI controllers in master mode. + MPC83xx platform uses the controller in cpu mode or CPM/QE mode. + MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index f32d11e..c6a56c7 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -32,7 +32,7 @@ obj-$(CONFIG_SPI_PL022) += amba-pl022.o obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o -obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o +obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o diff --git a/drivers/spi/spi_fsl_spi.c b/drivers/spi/spi_fsl_spi.c new file mode 100644 index 0000000..1dd86b8 --- /dev/null +++ b/drivers/spi/spi_fsl_spi.c @@ -0,0 +1,1425 @@ +/* + * MPC8xxx SPI controller driver. + * + * Maintainer: Kumar Gala + * + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* CPM1 and CPM2 are mutually exclusive. */ +#ifdef CONFIG_CPM1 +#include +#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_CH_SPI, 0) +#else +#include +#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK, 0, 0) +#endif + +/* SPI Controller registers */ +struct mpc8xxx_spi_reg { + u8 res1[0x20]; + __be32 mode; + __be32 event; + __be32 mask; + __be32 command; + __be32 transmit; + __be32 receive; +}; + +/* SPI Controller mode register definitions */ +#define SPMODE_LOOP (1 << 30) +#define SPMODE_CI_INACTIVEHIGH (1 << 29) +#define SPMODE_CP_BEGIN_EDGECLK (1 << 28) +#define SPMODE_DIV16 (1 << 27) +#define SPMODE_REV (1 << 26) +#define SPMODE_MS (1 << 25) +#define SPMODE_ENABLE (1 << 24) +#define SPMODE_LEN(x) ((x) << 20) +#define SPMODE_PM(x) ((x) << 16) +#define SPMODE_OP (1 << 14) +#define SPMODE_CG(x) ((x) << 7) + +/* + * Default for SPI Mode: + * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk + */ +#define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ + SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) + +/* SPIE register values */ +#define SPIE_NE 0x00000200 /* Not empty */ +#define SPIE_NF 0x00000100 /* Not full */ + +/* SPIM register values */ +#define SPIM_NE 0x00000200 /* Not empty */ +#define SPIM_NF 0x00000100 /* Not full */ + +#define SPIE_TXB 0x00000200 /* Last char is written to tx fifo */ +#define SPIE_RXB 0x00000100 /* Last char is written to rx buf */ + +/* SPCOM register values */ +#define SPCOM_STR (1 << 23) /* Start transmit */ + +#define SPI_PRAM_SIZE 0x100 +#define SPI_MRBLR ((unsigned int)PAGE_SIZE) + +/* SPI Controller driver's private data. */ +struct mpc8xxx_spi { + struct device *dev; + struct mpc8xxx_spi_reg __iomem *base; + + /* rx & tx bufs from the spi_transfer */ + const void *tx; + void *rx; + + int subblock; + struct spi_pram __iomem *pram; + struct cpm_buf_desc __iomem *tx_bd; + struct cpm_buf_desc __iomem *rx_bd; + + struct spi_transfer *xfer_in_progress; + + /* dma addresses for CPM transfers */ + dma_addr_t tx_dma; + dma_addr_t rx_dma; + bool map_tx_dma; + bool map_rx_dma; + + dma_addr_t dma_dummy_tx; + dma_addr_t dma_dummy_rx; + + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32(*get_tx) (struct mpc8xxx_spi *); + + unsigned int count; + unsigned int irq; + + unsigned nsecs; /* (clock cycle time)/2 */ + + u32 spibrg; /* SPIBRG input clock */ + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + + unsigned int flags; + + struct workqueue_struct *workqueue; + struct work_struct work; + + struct list_head queue; + spinlock_t lock; + + struct completion done; +}; + +static void *mpc8xxx_dummy_rx; +static DEFINE_MUTEX(mpc8xxx_dummy_rx_lock); +static int mpc8xxx_dummy_rx_refcnt; + +struct spi_mpc8xxx_cs { + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32 (*get_tx) (struct mpc8xxx_spi *); + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + u32 hw_mode; /* Holds HW mode register settings */ +}; + +static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) +{ + out_be32(reg, val); +} + +static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) +{ + return in_be32(reg); +} + +#define MPC83XX_SPI_RX_BUF(type) \ +static \ +void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + type *rx = mpc8xxx_spi->rx; \ + *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ + mpc8xxx_spi->rx = rx; \ +} + +#define MPC83XX_SPI_TX_BUF(type) \ +static \ +u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + u32 data; \ + const type *tx = mpc8xxx_spi->tx; \ + if (!tx) \ + return 0; \ + data = *tx++ << mpc8xxx_spi->tx_shift; \ + mpc8xxx_spi->tx = tx; \ + return data; \ +} + +MPC83XX_SPI_RX_BUF(u8) +MPC83XX_SPI_RX_BUF(u16) +MPC83XX_SPI_RX_BUF(u32) +MPC83XX_SPI_TX_BUF(u8) +MPC83XX_SPI_TX_BUF(u16) +MPC83XX_SPI_TX_BUF(u32) + +static void mpc8xxx_spi_change_mode(struct spi_device *spi) +{ + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct spi_mpc8xxx_cs *cs = spi->controller_state; + __be32 __iomem *mode = &mspi->base->mode; + unsigned long flags; + + if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) + return; + + /* Turn off IRQs locally to minimize time that SPI is disabled. */ + local_irq_save(flags); + + /* Turn off SPI unit prior changing mode */ + mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE); + + /* When in CPM mode, we need to reinit tx and rx. */ + if (mspi->flags & SPI_CPM_MODE) { + if (mspi->flags & SPI_QE) { + qe_issue_cmd(QE_INIT_TX_RX, mspi->subblock, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + } else { + cpm_command(CPM_SPI_CMD, CPM_CR_INIT_TRX); + if (mspi->flags & SPI_CPM1) { + out_be16(&mspi->pram->rbptr, + in_be16(&mspi->pram->rbase)); + out_be16(&mspi->pram->tbptr, + in_be16(&mspi->pram->tbase)); + } + } + } + mpc8xxx_spi_write_reg(mode, cs->hw_mode); + local_irq_restore(flags); +} + +static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; + bool pol = spi->mode & SPI_CS_HIGH; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (value == BITBANG_CS_INACTIVE) { + if (pdata->cs_control) + pdata->cs_control(spi, !pol); + } + + if (value == BITBANG_CS_ACTIVE) { + mpc8xxx_spi->rx_shift = cs->rx_shift; + mpc8xxx_spi->tx_shift = cs->tx_shift; + mpc8xxx_spi->get_rx = cs->get_rx; + mpc8xxx_spi->get_tx = cs->get_tx; + + mpc8xxx_spi_change_mode(spi); + + if (pdata->cs_control) + pdata->cs_control(spi, pol); + } +} + +static int +mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + struct mpc8xxx_spi *mpc8xxx_spi, + int bits_per_word) +{ + cs->rx_shift = 0; + cs->tx_shift = 0; + if (bits_per_word <= 8) { + cs->get_rx = mpc8xxx_spi_rx_buf_u8; + cs->get_tx = mpc8xxx_spi_tx_buf_u8; + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + cs->rx_shift = 16; + cs->tx_shift = 24; + } + } else if (bits_per_word <= 16) { + cs->get_rx = mpc8xxx_spi_rx_buf_u16; + cs->get_tx = mpc8xxx_spi_tx_buf_u16; + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + cs->rx_shift = 16; + cs->tx_shift = 16; + } + } else if (bits_per_word <= 32) { + cs->get_rx = mpc8xxx_spi_rx_buf_u32; + cs->get_tx = mpc8xxx_spi_tx_buf_u32; + } else + return -EINVAL; + + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE && + spi->mode & SPI_LSB_FIRST) { + cs->tx_shift = 0; + if (bits_per_word <= 8) + cs->rx_shift = 8; + else + cs->rx_shift = 0; + } + mpc8xxx_spi->rx_shift = cs->rx_shift; + mpc8xxx_spi->tx_shift = cs->tx_shift; + mpc8xxx_spi->get_rx = cs->get_rx; + mpc8xxx_spi->get_tx = cs->get_tx; + + return bits_per_word; +} + +static int +mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + int bits_per_word) +{ + /* QE uses Little Endian for words > 8 + * so transform all words > 8 into 8 bits + * Unfortnatly that doesn't work for LSB so + * reject these for now */ + /* Note: 32 bits word, LSB works iff + * tfcr/rfcr is set to CPMFCR_GBL */ + if (spi->mode & SPI_LSB_FIRST && + bits_per_word > 8) + return -EINVAL; + if (bits_per_word > 8) + return 8; /* pretend its 8 bits */ + return bits_per_word; +} + +static +int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + int bits_per_word; + u8 pm; + u32 hz; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + mpc8xxx_spi = spi_master_get_devdata(spi->master); + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } else { + bits_per_word = 0; + hz = 0; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* Make sure its a bit width we support [4..16, 32] */ + if ((bits_per_word < 4) + || ((bits_per_word > 16) && (bits_per_word != 32))) + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) + bits_per_word = mspi_apply_cpu_mode_quirks(cs, spi, + mpc8xxx_spi, + bits_per_word); + else if (mpc8xxx_spi->flags & SPI_QE) + bits_per_word = mspi_apply_qe_mode_quirks(cs, spi, + bits_per_word); + + if (bits_per_word < 0) + return bits_per_word; + + if (bits_per_word == 32) + bits_per_word = 0; + else + bits_per_word = bits_per_word - 1; + + /* mask out bits we are going to set */ + cs->hw_mode &= ~(SPMODE_LEN(0xF) | SPMODE_DIV16 + | SPMODE_PM(0xF)); + + cs->hw_mode |= SPMODE_LEN(bits_per_word); + + if ((mpc8xxx_spi->spibrg / hz) > 64) { + cs->hw_mode |= SPMODE_DIV16; + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; + + WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " + "Will use %d Hz instead.\n", dev_name(&spi->dev), + hz, mpc8xxx_spi->spibrg / 1024); + if (pm > 16) + pm = 16; + } else + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + if (pm) + pm--; + + cs->hw_mode |= SPMODE_PM(pm); + + mpc8xxx_spi_change_mode(spi); + return 0; +} + +static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) +{ + struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; + struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; + unsigned int xfer_len = min(mspi->count, SPI_MRBLR); + unsigned int xfer_ofs; + + xfer_ofs = mspi->xfer_in_progress->len - mspi->count; + + if (mspi->rx_dma == mspi->dma_dummy_rx) + out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma); + else + out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs); + out_be16(&rx_bd->cbd_datlen, 0); + out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP); + + if (mspi->tx_dma == mspi->dma_dummy_tx) + out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma); + else + out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs); + out_be16(&tx_bd->cbd_datlen, xfer_len); + out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP | + BD_SC_LAST); + + /* start transfer */ + mpc8xxx_spi_write_reg(&mspi->base->command, SPCOM_STR); +} + +static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, + struct spi_transfer *t, bool is_dma_mapped) +{ + struct device *dev = mspi->dev; + + if (is_dma_mapped) { + mspi->map_tx_dma = 0; + mspi->map_rx_dma = 0; + } else { + mspi->map_tx_dma = 1; + mspi->map_rx_dma = 1; + } + + if (!t->tx_buf) { + mspi->tx_dma = mspi->dma_dummy_tx; + mspi->map_tx_dma = 0; + } + + if (!t->rx_buf) { + mspi->rx_dma = mspi->dma_dummy_rx; + mspi->map_rx_dma = 0; + } + + if (mspi->map_tx_dma) { + void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */ + + mspi->tx_dma = dma_map_single(dev, nonconst_tx, t->len, + DMA_TO_DEVICE); + if (dma_mapping_error(dev, mspi->tx_dma)) { + dev_err(dev, "unable to map tx dma\n"); + return -ENOMEM; + } + } else if (t->tx_buf) { + mspi->tx_dma = t->tx_dma; + } + + if (mspi->map_rx_dma) { + mspi->rx_dma = dma_map_single(dev, mspi->rx, t->len, + DMA_FROM_DEVICE); + if (dma_mapping_error(dev, mspi->rx_dma)) { + dev_err(dev, "unable to map rx dma\n"); + goto err_rx_dma; + } + } else if (t->rx_buf) { + mspi->rx_dma = t->rx_dma; + } + + /* enable rx ints */ + mpc8xxx_spi_write_reg(&mspi->base->mask, SPIE_RXB); + + mspi->xfer_in_progress = t; + mspi->count = t->len; + + /* start CPM transfers */ + mpc8xxx_spi_cpm_bufs_start(mspi); + + return 0; + +err_rx_dma: + if (mspi->map_tx_dma) + dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE); + return -ENOMEM; +} + +static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) +{ + struct device *dev = mspi->dev; + struct spi_transfer *t = mspi->xfer_in_progress; + + if (mspi->map_tx_dma) + dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE); + if (mspi->map_rx_dma) + dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE); + mspi->xfer_in_progress = NULL; +} + +static int mpc8xxx_spi_cpu_bufs(struct mpc8xxx_spi *mspi, + struct spi_transfer *t, unsigned int len) +{ + u32 word; + + mspi->count = len; + + /* enable rx ints */ + mpc8xxx_spi_write_reg(&mspi->base->mask, SPIM_NE); + + /* transmit word */ + word = mspi->get_tx(mspi); + mpc8xxx_spi_write_reg(&mspi->base->transmit, word); + + return 0; +} + +static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, + bool is_dma_mapped) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + unsigned int len = t->len; + u8 bits_per_word; + int ret; + + bits_per_word = spi->bits_per_word; + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (bits_per_word > 8) { + /* invalid length? */ + if (len & 1) + return -EINVAL; + len /= 2; + } + if (bits_per_word > 16) { + /* invalid length? */ + if (len & 1) + return -EINVAL; + len /= 2; + } + + mpc8xxx_spi->tx = t->tx_buf; + mpc8xxx_spi->rx = t->rx_buf; + + INIT_COMPLETION(mpc8xxx_spi->done); + + if (mpc8xxx_spi->flags & SPI_CPM_MODE) + ret = mpc8xxx_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); + else + ret = mpc8xxx_spi_cpu_bufs(mpc8xxx_spi, t, len); + if (ret) + return ret; + + wait_for_completion(&mpc8xxx_spi->done); + + /* disable rx ints */ + mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); + + if (mpc8xxx_spi->flags & SPI_CPM_MODE) + mpc8xxx_spi_cpm_bufs_complete(mpc8xxx_spi); + + return mpc8xxx_spi->count; +} + +static void mpc8xxx_spi_do_one_msg(struct spi_message *m) +{ + struct spi_device *spi = m->spi; + struct spi_transfer *t; + unsigned int cs_change; + const int nsecs = 50; + int status; + + cs_change = 1; + status = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { + /* Don't allow changes if CS is active */ + status = -EINVAL; + + if (cs_change) + status = mpc8xxx_spi_setup_transfer(spi, t); + if (status < 0) + break; + } + + if (cs_change) { + mpc8xxx_spi_chipselect(spi, BITBANG_CS_ACTIVE); + ndelay(nsecs); + } + cs_change = t->cs_change; + if (t->len) + status = mpc8xxx_spi_bufs(spi, t, m->is_dma_mapped); + if (status) { + status = -EMSGSIZE; + break; + } + m->actual_length += t->len; + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (cs_change) { + ndelay(nsecs); + mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(nsecs); + } + } + + m->status = status; + m->complete(m->context); + + if (status || !cs_change) { + ndelay(nsecs); + mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); + } + + mpc8xxx_spi_setup_transfer(spi, NULL); +} + +static void mpc8xxx_spi_work(struct work_struct *work) +{ + struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, + work); + + spin_lock_irq(&mpc8xxx_spi->lock); + while (!list_empty(&mpc8xxx_spi->queue)) { + struct spi_message *m = container_of(mpc8xxx_spi->queue.next, + struct spi_message, queue); + + list_del_init(&m->queue); + spin_unlock_irq(&mpc8xxx_spi->lock); + + mpc8xxx_spi_do_one_msg(m); + + spin_lock_irq(&mpc8xxx_spi->lock); + } + spin_unlock_irq(&mpc8xxx_spi->lock); +} + +static int mpc8xxx_spi_setup(struct spi_device *spi) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + int retval; + u32 hw_mode; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (!spi->max_speed_hz) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + mpc8xxx_spi = spi_master_get_devdata(spi->master); + + hw_mode = cs->hw_mode; /* Save original settings */ + cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); + /* mask out bits we are going to set */ + cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH + | SPMODE_REV | SPMODE_LOOP); + + if (spi->mode & SPI_CPHA) + cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK; + if (spi->mode & SPI_CPOL) + cs->hw_mode |= SPMODE_CI_INACTIVEHIGH; + if (!(spi->mode & SPI_LSB_FIRST)) + cs->hw_mode |= SPMODE_REV; + if (spi->mode & SPI_LOOP) + cs->hw_mode |= SPMODE_LOOP; + + retval = mpc8xxx_spi_setup_transfer(spi, NULL); + if (retval < 0) { + cs->hw_mode = hw_mode; /* Restore settings */ + return retval; + } + return 0; +} + +static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) +{ + u16 len; + + dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, + in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); + + len = in_be16(&mspi->rx_bd->cbd_datlen); + if (len > mspi->count) { + WARN_ON(1); + len = mspi->count; + } + + /* Clear the events */ + mpc8xxx_spi_write_reg(&mspi->base->event, events); + + mspi->count -= len; + if (mspi->count) + mpc8xxx_spi_cpm_bufs_start(mspi); + else + complete(&mspi->done); +} + +static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +{ + /* We need handle RX first */ + if (events & SPIE_NE) { + u32 rx_data = mpc8xxx_spi_read_reg(&mspi->base->receive); + + if (mspi->rx) + mspi->get_rx(rx_data, mspi); + } + + if ((events & SPIE_NF) == 0) + /* spin until TX is done */ + while (((events = + mpc8xxx_spi_read_reg(&mspi->base->event)) & + SPIE_NF) == 0) + cpu_relax(); + + /* Clear the events */ + mpc8xxx_spi_write_reg(&mspi->base->event, events); + + mspi->count -= 1; + if (mspi->count) { + u32 word = mspi->get_tx(mspi); + + mpc8xxx_spi_write_reg(&mspi->base->transmit, word); + } else { + complete(&mspi->done); + } +} + +static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data) +{ + struct mpc8xxx_spi *mspi = context_data; + irqreturn_t ret = IRQ_NONE; + u32 events; + + /* Get interrupt events(tx/rx) */ + events = mpc8xxx_spi_read_reg(&mspi->base->event); + if (events) + ret = IRQ_HANDLED; + + dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); + + if (mspi->flags & SPI_CPM_MODE) + mpc8xxx_spi_cpm_irq(mspi, events); + else + mpc8xxx_spi_cpu_irq(mspi, events); + + return ret; +} + +static int mpc8xxx_spi_transfer(struct spi_device *spi, + struct spi_message *m) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spin_lock_irqsave(&mpc8xxx_spi->lock, flags); + list_add_tail(&m->queue, &mpc8xxx_spi->queue); + queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); + spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); + + return 0; +} + + +static void mpc8xxx_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +static void *mpc8xxx_spi_alloc_dummy_rx(void) +{ + mutex_lock(&mpc8xxx_dummy_rx_lock); + + if (!mpc8xxx_dummy_rx) + mpc8xxx_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); + if (mpc8xxx_dummy_rx) + mpc8xxx_dummy_rx_refcnt++; + + mutex_unlock(&mpc8xxx_dummy_rx_lock); + + return mpc8xxx_dummy_rx; +} + +static void mpc8xxx_spi_free_dummy_rx(void) +{ + mutex_lock(&mpc8xxx_dummy_rx_lock); + + switch (mpc8xxx_dummy_rx_refcnt) { + case 0: + WARN_ON(1); + break; + case 1: + kfree(mpc8xxx_dummy_rx); + mpc8xxx_dummy_rx = NULL; + /* fall through */ + default: + mpc8xxx_dummy_rx_refcnt--; + break; + } + + mutex_unlock(&mpc8xxx_dummy_rx_lock); +} + +static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) +{ + struct device *dev = mspi->dev; + struct device_node *np = dev->of_node; + const u32 *iprop; + int size; + unsigned long spi_base_ofs; + unsigned long pram_ofs = -ENOMEM; + + /* Can't use of_address_to_resource(), QE muram isn't at 0. */ + iprop = of_get_property(np, "reg", &size); + + /* QE with a fixed pram location? */ + if (mspi->flags & SPI_QE && iprop && size == sizeof(*iprop) * 4) + return cpm_muram_alloc_fixed(iprop[2], SPI_PRAM_SIZE); + + /* QE but with a dynamic pram location? */ + if (mspi->flags & SPI_QE) { + pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, mspi->subblock, + QE_CR_PROTOCOL_UNSPECIFIED, pram_ofs); + return pram_ofs; + } + + /* CPM1 and CPM2 pram must be at a fixed addr. */ + if (!iprop || size != sizeof(*iprop) * 4) + return -ENOMEM; + + spi_base_ofs = cpm_muram_alloc_fixed(iprop[2], 2); + if (IS_ERR_VALUE(spi_base_ofs)) + return -ENOMEM; + + if (mspi->flags & SPI_CPM2) { + pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); + if (!IS_ERR_VALUE(pram_ofs)) { + u16 __iomem *spi_base = cpm_muram_addr(spi_base_ofs); + + out_be16(spi_base, pram_ofs); + } + } else { + struct spi_pram __iomem *pram = cpm_muram_addr(spi_base_ofs); + u16 rpbase = in_be16(&pram->rpbase); + + /* Microcode relocation patch applied? */ + if (rpbase) + pram_ofs = rpbase; + else + return spi_base_ofs; + } + + cpm_muram_free(spi_base_ofs); + return pram_ofs; +} + +static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) +{ + struct device *dev = mspi->dev; + struct device_node *np = dev->of_node; + const u32 *iprop; + int size; + unsigned long pram_ofs; + unsigned long bds_ofs; + + if (!(mspi->flags & SPI_CPM_MODE)) + return 0; + + if (!mpc8xxx_spi_alloc_dummy_rx()) + return -ENOMEM; + + if (mspi->flags & SPI_QE) { + iprop = of_get_property(np, "cell-index", &size); + if (iprop && size == sizeof(*iprop)) + mspi->subblock = *iprop; + + switch (mspi->subblock) { + default: + dev_warn(dev, "cell-index unspecified, assuming SPI1"); + /* fall through */ + case 0: + mspi->subblock = QE_CR_SUBBLOCK_SPI1; + break; + case 1: + mspi->subblock = QE_CR_SUBBLOCK_SPI2; + break; + } + } + + pram_ofs = mpc8xxx_spi_cpm_get_pram(mspi); + if (IS_ERR_VALUE(pram_ofs)) { + dev_err(dev, "can't allocate spi parameter ram\n"); + goto err_pram; + } + + bds_ofs = cpm_muram_alloc(sizeof(*mspi->tx_bd) + + sizeof(*mspi->rx_bd), 8); + if (IS_ERR_VALUE(bds_ofs)) { + dev_err(dev, "can't allocate bds\n"); + goto err_bds; + } + + mspi->dma_dummy_tx = dma_map_single(dev, empty_zero_page, PAGE_SIZE, + DMA_TO_DEVICE); + if (dma_mapping_error(dev, mspi->dma_dummy_tx)) { + dev_err(dev, "unable to map dummy tx buffer\n"); + goto err_dummy_tx; + } + + mspi->dma_dummy_rx = dma_map_single(dev, mpc8xxx_dummy_rx, SPI_MRBLR, + DMA_FROM_DEVICE); + if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { + dev_err(dev, "unable to map dummy rx buffer\n"); + goto err_dummy_rx; + } + + mspi->pram = cpm_muram_addr(pram_ofs); + + mspi->tx_bd = cpm_muram_addr(bds_ofs); + mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd)); + + /* Initialize parameter ram. */ + out_be16(&mspi->pram->tbase, cpm_muram_offset(mspi->tx_bd)); + out_be16(&mspi->pram->rbase, cpm_muram_offset(mspi->rx_bd)); + out_8(&mspi->pram->tfcr, CPMFCR_EB | CPMFCR_GBL); + out_8(&mspi->pram->rfcr, CPMFCR_EB | CPMFCR_GBL); + out_be16(&mspi->pram->mrblr, SPI_MRBLR); + out_be32(&mspi->pram->rstate, 0); + out_be32(&mspi->pram->rdp, 0); + out_be16(&mspi->pram->rbptr, 0); + out_be16(&mspi->pram->rbc, 0); + out_be32(&mspi->pram->rxtmp, 0); + out_be32(&mspi->pram->tstate, 0); + out_be32(&mspi->pram->tdp, 0); + out_be16(&mspi->pram->tbptr, 0); + out_be16(&mspi->pram->tbc, 0); + out_be32(&mspi->pram->txtmp, 0); + + return 0; + +err_dummy_rx: + dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); +err_dummy_tx: + cpm_muram_free(bds_ofs); +err_bds: + cpm_muram_free(pram_ofs); +err_pram: + mpc8xxx_spi_free_dummy_rx(); + return -ENOMEM; +} + +static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) +{ + struct device *dev = mspi->dev; + + dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); + dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); + cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); + cpm_muram_free(cpm_muram_offset(mspi->pram)); + mpc8xxx_spi_free_dummy_rx(); +} + +static const char *mpc8xxx_spi_strmode(unsigned int flags) +{ + if (flags & SPI_QE_CPU_MODE) { + return "QE CPU"; + } else if (flags & SPI_CPM_MODE) { + if (flags & SPI_QE) + return "QE"; + else if (flags & SPI_CPM2) + return "CPM2"; + else + return "CPM1"; + } + return "CPU"; +} + +static struct spi_master * __devinit +mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + u32 regval; + int ret = 0; + + master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); + if (master == NULL) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(dev, master); + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH + | SPI_LSB_FIRST | SPI_LOOP; + + master->setup = mpc8xxx_spi_setup; + master->transfer = mpc8xxx_spi_transfer; + master->cleanup = mpc8xxx_spi_cleanup; + master->dev.of_node = dev->of_node; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->dev = dev; + mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; + mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; + mpc8xxx_spi->flags = pdata->flags; + mpc8xxx_spi->spibrg = pdata->sysclk; + + ret = mpc8xxx_spi_cpm_init(mpc8xxx_spi); + if (ret) + goto err_cpm_init; + + mpc8xxx_spi->rx_shift = 0; + mpc8xxx_spi->tx_shift = 0; + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + mpc8xxx_spi->rx_shift = 16; + mpc8xxx_spi->tx_shift = 24; + } + + init_completion(&mpc8xxx_spi->done); + + mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); + if (mpc8xxx_spi->base == NULL) { + ret = -ENOMEM; + goto err_ioremap; + } + + mpc8xxx_spi->irq = irq; + + /* Register for SPI Interrupt */ + ret = request_irq(mpc8xxx_spi->irq, mpc8xxx_spi_irq, + 0, "mpc8xxx_spi", mpc8xxx_spi); + + if (ret != 0) + goto unmap_io; + + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->max_chipselect; + + /* SPI controller initializations */ + mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, 0); + mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); + mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->command, 0); + mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, 0xffffffff); + + /* Enable SPI interface */ + regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) + regval |= SPMODE_OP; + + mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval); + spin_lock_init(&mpc8xxx_spi->lock); + init_completion(&mpc8xxx_spi->done); + INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); + INIT_LIST_HEAD(&mpc8xxx_spi->queue); + + mpc8xxx_spi->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (mpc8xxx_spi->workqueue == NULL) { + ret = -EBUSY; + goto free_irq; + } + + ret = spi_register_master(master); + if (ret < 0) + goto unreg_master; + + dev_info(dev, "at 0x%p (irq = %d), %s mode\n", mpc8xxx_spi->base, + mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); + + return master; + +unreg_master: + destroy_workqueue(mpc8xxx_spi->workqueue); +free_irq: + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); +unmap_io: + iounmap(mpc8xxx_spi->base); +err_ioremap: + mpc8xxx_spi_cpm_free(mpc8xxx_spi); +err_cpm_init: + spi_master_put(master); +err: + return ERR_PTR(ret); +} + +static int __devexit mpc8xxx_spi_remove(struct device *dev) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct spi_master *master; + + master = dev_get_drvdata(dev); + mpc8xxx_spi = spi_master_get_devdata(master); + + flush_workqueue(mpc8xxx_spi->workqueue); + destroy_workqueue(mpc8xxx_spi->workqueue); + spi_unregister_master(master); + + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); + iounmap(mpc8xxx_spi->base); + mpc8xxx_spi_cpm_free(mpc8xxx_spi); + + return 0; +} + +struct mpc8xxx_spi_probe_info { + struct fsl_spi_platform_data pdata; + int *gpios; + bool *alow_flags; +}; + +static struct mpc8xxx_spi_probe_info * +to_of_pinfo(struct fsl_spi_platform_data *pdata) +{ + return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); +} + +static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) +{ + struct device *dev = spi->dev.parent; + struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); + u16 cs = spi->chip_select; + int gpio = pinfo->gpios[cs]; + bool alow = pinfo->alow_flags[cs]; + + gpio_set_value(gpio, on ^ alow); +} + +static int of_mpc8xxx_spi_get_chipselects(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); + unsigned int ngpios; + int i = 0; + int ret; + + ngpios = of_gpio_count(np); + if (!ngpios) { + /* + * SPI w/o chip-select line. One SPI device is still permitted + * though. + */ + pdata->max_chipselect = 1; + return 0; + } + + pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL); + if (!pinfo->gpios) + return -ENOMEM; + memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios)); + + pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags), + GFP_KERNEL); + if (!pinfo->alow_flags) { + ret = -ENOMEM; + goto err_alloc_flags; + } + + for (; i < ngpios; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(np, i, &flags); + if (!gpio_is_valid(gpio)) { + dev_err(dev, "invalid gpio #%d: %d\n", i, gpio); + ret = gpio; + goto err_loop; + } + + ret = gpio_request(gpio, dev_name(dev)); + if (ret) { + dev_err(dev, "can't request gpio #%d: %d\n", i, ret); + goto err_loop; + } + + pinfo->gpios[i] = gpio; + pinfo->alow_flags[i] = flags & OF_GPIO_ACTIVE_LOW; + + ret = gpio_direction_output(pinfo->gpios[i], + pinfo->alow_flags[i]); + if (ret) { + dev_err(dev, "can't set output direction for gpio " + "#%d: %d\n", i, ret); + goto err_loop; + } + } + + pdata->max_chipselect = ngpios; + pdata->cs_control = mpc8xxx_spi_cs_control; + + return 0; + +err_loop: + while (i >= 0) { + if (gpio_is_valid(pinfo->gpios[i])) + gpio_free(pinfo->gpios[i]); + i--; + } + + kfree(pinfo->alow_flags); + pinfo->alow_flags = NULL; +err_alloc_flags: + kfree(pinfo->gpios); + pinfo->gpios = NULL; + return ret; +} + +static int of_mpc8xxx_spi_free_chipselects(struct device *dev) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); + int i; + + if (!pinfo->gpios) + return 0; + + for (i = 0; i < pdata->max_chipselect; i++) { + if (gpio_is_valid(pinfo->gpios[i])) + gpio_free(pinfo->gpios[i]); + } + + kfree(pinfo->gpios); + kfree(pinfo->alow_flags); + return 0; +} + +static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct mpc8xxx_spi_probe_info *pinfo; + struct fsl_spi_platform_data *pdata; + struct spi_master *master; + struct resource mem; + struct resource irq; + const void *prop; + int ret = -ENOMEM; + + pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); + if (!pinfo) + return -ENOMEM; + + pdata = &pinfo->pdata; + dev->platform_data = pdata; + + /* Allocate bus num dynamically. */ + pdata->bus_num = -1; + + /* SPI controller is either clocked from QE or SoC clock. */ + pdata->sysclk = get_brgfreq(); + if (pdata->sysclk == -1) { + pdata->sysclk = fsl_get_sys_freq(); + if (pdata->sysclk == -1) { + ret = -ENODEV; + goto err_clk; + } + } + + prop = of_get_property(np, "mode", NULL); + if (prop && !strcmp(prop, "cpu-qe")) + pdata->flags = SPI_QE_CPU_MODE; + else if (prop && !strcmp(prop, "qe")) + pdata->flags = SPI_CPM_MODE | SPI_QE; + else if (of_device_is_compatible(np, "fsl,cpm2-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM2; + else if (of_device_is_compatible(np, "fsl,cpm1-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM1; + + ret = of_mpc8xxx_spi_get_chipselects(dev); + if (ret) + goto err; + + ret = of_address_to_resource(np, 0, &mem); + if (ret) + goto err; + + ret = of_irq_to_resource(np, 0, &irq); + if (!ret) { + ret = -EINVAL; + goto err; + } + + master = mpc8xxx_spi_probe(dev, &mem, irq.start); + if (IS_ERR(master)) { + ret = PTR_ERR(master); + goto err; + } + + return 0; + +err: + of_mpc8xxx_spi_free_chipselects(dev); +err_clk: + kfree(pinfo); + return ret; +} + +static int __devexit of_mpc8xxx_spi_remove(struct platform_device *ofdev) +{ + int ret; + + ret = mpc8xxx_spi_remove(&ofdev->dev); + if (ret) + return ret; + of_mpc8xxx_spi_free_chipselects(&ofdev->dev); + return 0; +} + +static const struct of_device_id of_mpc8xxx_spi_match[] = { + { .compatible = "fsl,spi" }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_mpc8xxx_spi_match); + +static struct of_platform_driver of_mpc8xxx_spi_driver = { + .driver = { + .name = "mpc8xxx_spi", + .owner = THIS_MODULE, + .of_match_table = of_mpc8xxx_spi_match, + }, + .probe = of_mpc8xxx_spi_probe, + .remove = __devexit_p(of_mpc8xxx_spi_remove), +}; + +#ifdef CONFIG_MPC832x_RDB +/* + * XXX XXX XXX + * This is "legacy" platform driver, was used by the MPC8323E-RDB boards + * only. The driver should go away soon, since newer MPC8323E-RDB's device + * tree can work with OpenFirmware driver. But for now we support old trees + * as well. + */ +static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) +{ + struct resource *mem; + int irq; + struct spi_master *master; + + if (!pdev->dev.platform_data) + return -EINVAL; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -EINVAL; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return -EINVAL; + + master = mpc8xxx_spi_probe(&pdev->dev, mem, irq); + if (IS_ERR(master)) + return PTR_ERR(master); + return 0; +} + +static int __devexit plat_mpc8xxx_spi_remove(struct platform_device *pdev) +{ + return mpc8xxx_spi_remove(&pdev->dev); +} + +MODULE_ALIAS("platform:mpc8xxx_spi"); +static struct platform_driver mpc8xxx_spi_driver = { + .probe = plat_mpc8xxx_spi_probe, + .remove = __devexit_p(plat_mpc8xxx_spi_remove), + .driver = { + .name = "mpc8xxx_spi", + .owner = THIS_MODULE, + }, +}; + +static bool legacy_driver_failed; + +static void __init legacy_driver_register(void) +{ + legacy_driver_failed = platform_driver_register(&mpc8xxx_spi_driver); +} + +static void __exit legacy_driver_unregister(void) +{ + if (legacy_driver_failed) + return; + platform_driver_unregister(&mpc8xxx_spi_driver); +} +#else +static void __init legacy_driver_register(void) {} +static void __exit legacy_driver_unregister(void) {} +#endif /* CONFIG_MPC832x_RDB */ + +static int __init mpc8xxx_spi_init(void) +{ + legacy_driver_register(); + return of_register_platform_driver(&of_mpc8xxx_spi_driver); +} + +static void __exit mpc8xxx_spi_exit(void) +{ + of_unregister_platform_driver(&of_mpc8xxx_spi_driver); + legacy_driver_unregister(); +} + +module_init(mpc8xxx_spi_init); +module_exit(mpc8xxx_spi_exit); + +MODULE_AUTHOR("Kumar Gala"); +MODULE_DESCRIPTION("Simple MPC8xxx SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c deleted file mode 100644 index 1dd86b8..0000000 --- a/drivers/spi/spi_mpc8xxx.c +++ /dev/null @@ -1,1425 +0,0 @@ -/* - * MPC8xxx SPI controller driver. - * - * Maintainer: Kumar Gala - * - * Copyright (C) 2006 Polycom, Inc. - * - * CPM SPI and QE buffer descriptors mode support: - * Copyright (c) 2009 MontaVista Software, Inc. - * Author: Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* CPM1 and CPM2 are mutually exclusive. */ -#ifdef CONFIG_CPM1 -#include -#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_CH_SPI, 0) -#else -#include -#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK, 0, 0) -#endif - -/* SPI Controller registers */ -struct mpc8xxx_spi_reg { - u8 res1[0x20]; - __be32 mode; - __be32 event; - __be32 mask; - __be32 command; - __be32 transmit; - __be32 receive; -}; - -/* SPI Controller mode register definitions */ -#define SPMODE_LOOP (1 << 30) -#define SPMODE_CI_INACTIVEHIGH (1 << 29) -#define SPMODE_CP_BEGIN_EDGECLK (1 << 28) -#define SPMODE_DIV16 (1 << 27) -#define SPMODE_REV (1 << 26) -#define SPMODE_MS (1 << 25) -#define SPMODE_ENABLE (1 << 24) -#define SPMODE_LEN(x) ((x) << 20) -#define SPMODE_PM(x) ((x) << 16) -#define SPMODE_OP (1 << 14) -#define SPMODE_CG(x) ((x) << 7) - -/* - * Default for SPI Mode: - * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk - */ -#define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ - SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) - -/* SPIE register values */ -#define SPIE_NE 0x00000200 /* Not empty */ -#define SPIE_NF 0x00000100 /* Not full */ - -/* SPIM register values */ -#define SPIM_NE 0x00000200 /* Not empty */ -#define SPIM_NF 0x00000100 /* Not full */ - -#define SPIE_TXB 0x00000200 /* Last char is written to tx fifo */ -#define SPIE_RXB 0x00000100 /* Last char is written to rx buf */ - -/* SPCOM register values */ -#define SPCOM_STR (1 << 23) /* Start transmit */ - -#define SPI_PRAM_SIZE 0x100 -#define SPI_MRBLR ((unsigned int)PAGE_SIZE) - -/* SPI Controller driver's private data. */ -struct mpc8xxx_spi { - struct device *dev; - struct mpc8xxx_spi_reg __iomem *base; - - /* rx & tx bufs from the spi_transfer */ - const void *tx; - void *rx; - - int subblock; - struct spi_pram __iomem *pram; - struct cpm_buf_desc __iomem *tx_bd; - struct cpm_buf_desc __iomem *rx_bd; - - struct spi_transfer *xfer_in_progress; - - /* dma addresses for CPM transfers */ - dma_addr_t tx_dma; - dma_addr_t rx_dma; - bool map_tx_dma; - bool map_rx_dma; - - dma_addr_t dma_dummy_tx; - dma_addr_t dma_dummy_rx; - - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32(*get_tx) (struct mpc8xxx_spi *); - - unsigned int count; - unsigned int irq; - - unsigned nsecs; /* (clock cycle time)/2 */ - - u32 spibrg; /* SPIBRG input clock */ - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - - unsigned int flags; - - struct workqueue_struct *workqueue; - struct work_struct work; - - struct list_head queue; - spinlock_t lock; - - struct completion done; -}; - -static void *mpc8xxx_dummy_rx; -static DEFINE_MUTEX(mpc8xxx_dummy_rx_lock); -static int mpc8xxx_dummy_rx_refcnt; - -struct spi_mpc8xxx_cs { - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32 (*get_tx) (struct mpc8xxx_spi *); - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - u32 hw_mode; /* Holds HW mode register settings */ -}; - -static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) -{ - out_be32(reg, val); -} - -static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) -{ - return in_be32(reg); -} - -#define MPC83XX_SPI_RX_BUF(type) \ -static \ -void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - type *rx = mpc8xxx_spi->rx; \ - *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ - mpc8xxx_spi->rx = rx; \ -} - -#define MPC83XX_SPI_TX_BUF(type) \ -static \ -u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - u32 data; \ - const type *tx = mpc8xxx_spi->tx; \ - if (!tx) \ - return 0; \ - data = *tx++ << mpc8xxx_spi->tx_shift; \ - mpc8xxx_spi->tx = tx; \ - return data; \ -} - -MPC83XX_SPI_RX_BUF(u8) -MPC83XX_SPI_RX_BUF(u16) -MPC83XX_SPI_RX_BUF(u32) -MPC83XX_SPI_TX_BUF(u8) -MPC83XX_SPI_TX_BUF(u16) -MPC83XX_SPI_TX_BUF(u32) - -static void mpc8xxx_spi_change_mode(struct spi_device *spi) -{ - struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); - struct spi_mpc8xxx_cs *cs = spi->controller_state; - __be32 __iomem *mode = &mspi->base->mode; - unsigned long flags; - - if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) - return; - - /* Turn off IRQs locally to minimize time that SPI is disabled. */ - local_irq_save(flags); - - /* Turn off SPI unit prior changing mode */ - mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE); - - /* When in CPM mode, we need to reinit tx and rx. */ - if (mspi->flags & SPI_CPM_MODE) { - if (mspi->flags & SPI_QE) { - qe_issue_cmd(QE_INIT_TX_RX, mspi->subblock, - QE_CR_PROTOCOL_UNSPECIFIED, 0); - } else { - cpm_command(CPM_SPI_CMD, CPM_CR_INIT_TRX); - if (mspi->flags & SPI_CPM1) { - out_be16(&mspi->pram->rbptr, - in_be16(&mspi->pram->rbase)); - out_be16(&mspi->pram->tbptr, - in_be16(&mspi->pram->tbase)); - } - } - } - mpc8xxx_spi_write_reg(mode, cs->hw_mode); - local_irq_restore(flags); -} - -static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; - bool pol = spi->mode & SPI_CS_HIGH; - struct spi_mpc8xxx_cs *cs = spi->controller_state; - - if (value == BITBANG_CS_INACTIVE) { - if (pdata->cs_control) - pdata->cs_control(spi, !pol); - } - - if (value == BITBANG_CS_ACTIVE) { - mpc8xxx_spi->rx_shift = cs->rx_shift; - mpc8xxx_spi->tx_shift = cs->tx_shift; - mpc8xxx_spi->get_rx = cs->get_rx; - mpc8xxx_spi->get_tx = cs->get_tx; - - mpc8xxx_spi_change_mode(spi); - - if (pdata->cs_control) - pdata->cs_control(spi, pol); - } -} - -static int -mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - struct mpc8xxx_spi *mpc8xxx_spi, - int bits_per_word) -{ - cs->rx_shift = 0; - cs->tx_shift = 0; - if (bits_per_word <= 8) { - cs->get_rx = mpc8xxx_spi_rx_buf_u8; - cs->get_tx = mpc8xxx_spi_tx_buf_u8; - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { - cs->rx_shift = 16; - cs->tx_shift = 24; - } - } else if (bits_per_word <= 16) { - cs->get_rx = mpc8xxx_spi_rx_buf_u16; - cs->get_tx = mpc8xxx_spi_tx_buf_u16; - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { - cs->rx_shift = 16; - cs->tx_shift = 16; - } - } else if (bits_per_word <= 32) { - cs->get_rx = mpc8xxx_spi_rx_buf_u32; - cs->get_tx = mpc8xxx_spi_tx_buf_u32; - } else - return -EINVAL; - - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE && - spi->mode & SPI_LSB_FIRST) { - cs->tx_shift = 0; - if (bits_per_word <= 8) - cs->rx_shift = 8; - else - cs->rx_shift = 0; - } - mpc8xxx_spi->rx_shift = cs->rx_shift; - mpc8xxx_spi->tx_shift = cs->tx_shift; - mpc8xxx_spi->get_rx = cs->get_rx; - mpc8xxx_spi->get_tx = cs->get_tx; - - return bits_per_word; -} - -static int -mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - int bits_per_word) -{ - /* QE uses Little Endian for words > 8 - * so transform all words > 8 into 8 bits - * Unfortnatly that doesn't work for LSB so - * reject these for now */ - /* Note: 32 bits word, LSB works iff - * tfcr/rfcr is set to CPMFCR_GBL */ - if (spi->mode & SPI_LSB_FIRST && - bits_per_word > 8) - return -EINVAL; - if (bits_per_word > 8) - return 8; /* pretend its 8 bits */ - return bits_per_word; -} - -static -int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - int bits_per_word; - u8 pm; - u32 hz; - struct spi_mpc8xxx_cs *cs = spi->controller_state; - - mpc8xxx_spi = spi_master_get_devdata(spi->master); - - if (t) { - bits_per_word = t->bits_per_word; - hz = t->speed_hz; - } else { - bits_per_word = 0; - hz = 0; - } - - /* spi_transfer level calls that work per-word */ - if (!bits_per_word) - bits_per_word = spi->bits_per_word; - - /* Make sure its a bit width we support [4..16, 32] */ - if ((bits_per_word < 4) - || ((bits_per_word > 16) && (bits_per_word != 32))) - return -EINVAL; - - if (!hz) - hz = spi->max_speed_hz; - - if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) - bits_per_word = mspi_apply_cpu_mode_quirks(cs, spi, - mpc8xxx_spi, - bits_per_word); - else if (mpc8xxx_spi->flags & SPI_QE) - bits_per_word = mspi_apply_qe_mode_quirks(cs, spi, - bits_per_word); - - if (bits_per_word < 0) - return bits_per_word; - - if (bits_per_word == 32) - bits_per_word = 0; - else - bits_per_word = bits_per_word - 1; - - /* mask out bits we are going to set */ - cs->hw_mode &= ~(SPMODE_LEN(0xF) | SPMODE_DIV16 - | SPMODE_PM(0xF)); - - cs->hw_mode |= SPMODE_LEN(bits_per_word); - - if ((mpc8xxx_spi->spibrg / hz) > 64) { - cs->hw_mode |= SPMODE_DIV16; - pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; - - WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " - "Will use %d Hz instead.\n", dev_name(&spi->dev), - hz, mpc8xxx_spi->spibrg / 1024); - if (pm > 16) - pm = 16; - } else - pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; - if (pm) - pm--; - - cs->hw_mode |= SPMODE_PM(pm); - - mpc8xxx_spi_change_mode(spi); - return 0; -} - -static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) -{ - struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; - struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; - unsigned int xfer_len = min(mspi->count, SPI_MRBLR); - unsigned int xfer_ofs; - - xfer_ofs = mspi->xfer_in_progress->len - mspi->count; - - if (mspi->rx_dma == mspi->dma_dummy_rx) - out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma); - else - out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs); - out_be16(&rx_bd->cbd_datlen, 0); - out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP); - - if (mspi->tx_dma == mspi->dma_dummy_tx) - out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma); - else - out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs); - out_be16(&tx_bd->cbd_datlen, xfer_len); - out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP | - BD_SC_LAST); - - /* start transfer */ - mpc8xxx_spi_write_reg(&mspi->base->command, SPCOM_STR); -} - -static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, - struct spi_transfer *t, bool is_dma_mapped) -{ - struct device *dev = mspi->dev; - - if (is_dma_mapped) { - mspi->map_tx_dma = 0; - mspi->map_rx_dma = 0; - } else { - mspi->map_tx_dma = 1; - mspi->map_rx_dma = 1; - } - - if (!t->tx_buf) { - mspi->tx_dma = mspi->dma_dummy_tx; - mspi->map_tx_dma = 0; - } - - if (!t->rx_buf) { - mspi->rx_dma = mspi->dma_dummy_rx; - mspi->map_rx_dma = 0; - } - - if (mspi->map_tx_dma) { - void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */ - - mspi->tx_dma = dma_map_single(dev, nonconst_tx, t->len, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, mspi->tx_dma)) { - dev_err(dev, "unable to map tx dma\n"); - return -ENOMEM; - } - } else if (t->tx_buf) { - mspi->tx_dma = t->tx_dma; - } - - if (mspi->map_rx_dma) { - mspi->rx_dma = dma_map_single(dev, mspi->rx, t->len, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, mspi->rx_dma)) { - dev_err(dev, "unable to map rx dma\n"); - goto err_rx_dma; - } - } else if (t->rx_buf) { - mspi->rx_dma = t->rx_dma; - } - - /* enable rx ints */ - mpc8xxx_spi_write_reg(&mspi->base->mask, SPIE_RXB); - - mspi->xfer_in_progress = t; - mspi->count = t->len; - - /* start CPM transfers */ - mpc8xxx_spi_cpm_bufs_start(mspi); - - return 0; - -err_rx_dma: - if (mspi->map_tx_dma) - dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE); - return -ENOMEM; -} - -static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) -{ - struct device *dev = mspi->dev; - struct spi_transfer *t = mspi->xfer_in_progress; - - if (mspi->map_tx_dma) - dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE); - if (mspi->map_rx_dma) - dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE); - mspi->xfer_in_progress = NULL; -} - -static int mpc8xxx_spi_cpu_bufs(struct mpc8xxx_spi *mspi, - struct spi_transfer *t, unsigned int len) -{ - u32 word; - - mspi->count = len; - - /* enable rx ints */ - mpc8xxx_spi_write_reg(&mspi->base->mask, SPIM_NE); - - /* transmit word */ - word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(&mspi->base->transmit, word); - - return 0; -} - -static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, - bool is_dma_mapped) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - unsigned int len = t->len; - u8 bits_per_word; - int ret; - - bits_per_word = spi->bits_per_word; - if (t->bits_per_word) - bits_per_word = t->bits_per_word; - - if (bits_per_word > 8) { - /* invalid length? */ - if (len & 1) - return -EINVAL; - len /= 2; - } - if (bits_per_word > 16) { - /* invalid length? */ - if (len & 1) - return -EINVAL; - len /= 2; - } - - mpc8xxx_spi->tx = t->tx_buf; - mpc8xxx_spi->rx = t->rx_buf; - - INIT_COMPLETION(mpc8xxx_spi->done); - - if (mpc8xxx_spi->flags & SPI_CPM_MODE) - ret = mpc8xxx_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); - else - ret = mpc8xxx_spi_cpu_bufs(mpc8xxx_spi, t, len); - if (ret) - return ret; - - wait_for_completion(&mpc8xxx_spi->done); - - /* disable rx ints */ - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); - - if (mpc8xxx_spi->flags & SPI_CPM_MODE) - mpc8xxx_spi_cpm_bufs_complete(mpc8xxx_spi); - - return mpc8xxx_spi->count; -} - -static void mpc8xxx_spi_do_one_msg(struct spi_message *m) -{ - struct spi_device *spi = m->spi; - struct spi_transfer *t; - unsigned int cs_change; - const int nsecs = 50; - int status; - - cs_change = 1; - status = 0; - list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->bits_per_word || t->speed_hz) { - /* Don't allow changes if CS is active */ - status = -EINVAL; - - if (cs_change) - status = mpc8xxx_spi_setup_transfer(spi, t); - if (status < 0) - break; - } - - if (cs_change) { - mpc8xxx_spi_chipselect(spi, BITBANG_CS_ACTIVE); - ndelay(nsecs); - } - cs_change = t->cs_change; - if (t->len) - status = mpc8xxx_spi_bufs(spi, t, m->is_dma_mapped); - if (status) { - status = -EMSGSIZE; - break; - } - m->actual_length += t->len; - - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (cs_change) { - ndelay(nsecs); - mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(nsecs); - } - } - - m->status = status; - m->complete(m->context); - - if (status || !cs_change) { - ndelay(nsecs); - mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); - } - - mpc8xxx_spi_setup_transfer(spi, NULL); -} - -static void mpc8xxx_spi_work(struct work_struct *work) -{ - struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, - work); - - spin_lock_irq(&mpc8xxx_spi->lock); - while (!list_empty(&mpc8xxx_spi->queue)) { - struct spi_message *m = container_of(mpc8xxx_spi->queue.next, - struct spi_message, queue); - - list_del_init(&m->queue); - spin_unlock_irq(&mpc8xxx_spi->lock); - - mpc8xxx_spi_do_one_msg(m); - - spin_lock_irq(&mpc8xxx_spi->lock); - } - spin_unlock_irq(&mpc8xxx_spi->lock); -} - -static int mpc8xxx_spi_setup(struct spi_device *spi) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - int retval; - u32 hw_mode; - struct spi_mpc8xxx_cs *cs = spi->controller_state; - - if (!spi->max_speed_hz) - return -EINVAL; - - if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); - if (!cs) - return -ENOMEM; - spi->controller_state = cs; - } - mpc8xxx_spi = spi_master_get_devdata(spi->master); - - hw_mode = cs->hw_mode; /* Save original settings */ - cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); - /* mask out bits we are going to set */ - cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH - | SPMODE_REV | SPMODE_LOOP); - - if (spi->mode & SPI_CPHA) - cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK; - if (spi->mode & SPI_CPOL) - cs->hw_mode |= SPMODE_CI_INACTIVEHIGH; - if (!(spi->mode & SPI_LSB_FIRST)) - cs->hw_mode |= SPMODE_REV; - if (spi->mode & SPI_LOOP) - cs->hw_mode |= SPMODE_LOOP; - - retval = mpc8xxx_spi_setup_transfer(spi, NULL); - if (retval < 0) { - cs->hw_mode = hw_mode; /* Restore settings */ - return retval; - } - return 0; -} - -static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) -{ - u16 len; - - dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, - in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); - - len = in_be16(&mspi->rx_bd->cbd_datlen); - if (len > mspi->count) { - WARN_ON(1); - len = mspi->count; - } - - /* Clear the events */ - mpc8xxx_spi_write_reg(&mspi->base->event, events); - - mspi->count -= len; - if (mspi->count) - mpc8xxx_spi_cpm_bufs_start(mspi); - else - complete(&mspi->done); -} - -static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) -{ - /* We need handle RX first */ - if (events & SPIE_NE) { - u32 rx_data = mpc8xxx_spi_read_reg(&mspi->base->receive); - - if (mspi->rx) - mspi->get_rx(rx_data, mspi); - } - - if ((events & SPIE_NF) == 0) - /* spin until TX is done */ - while (((events = - mpc8xxx_spi_read_reg(&mspi->base->event)) & - SPIE_NF) == 0) - cpu_relax(); - - /* Clear the events */ - mpc8xxx_spi_write_reg(&mspi->base->event, events); - - mspi->count -= 1; - if (mspi->count) { - u32 word = mspi->get_tx(mspi); - - mpc8xxx_spi_write_reg(&mspi->base->transmit, word); - } else { - complete(&mspi->done); - } -} - -static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data) -{ - struct mpc8xxx_spi *mspi = context_data; - irqreturn_t ret = IRQ_NONE; - u32 events; - - /* Get interrupt events(tx/rx) */ - events = mpc8xxx_spi_read_reg(&mspi->base->event); - if (events) - ret = IRQ_HANDLED; - - dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); - - if (mspi->flags & SPI_CPM_MODE) - mpc8xxx_spi_cpm_irq(mspi, events); - else - mpc8xxx_spi_cpu_irq(mspi, events); - - return ret; -} - -static int mpc8xxx_spi_transfer(struct spi_device *spi, - struct spi_message *m) -{ - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - unsigned long flags; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - spin_lock_irqsave(&mpc8xxx_spi->lock, flags); - list_add_tail(&m->queue, &mpc8xxx_spi->queue); - queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); - spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); - - return 0; -} - - -static void mpc8xxx_spi_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - -static void *mpc8xxx_spi_alloc_dummy_rx(void) -{ - mutex_lock(&mpc8xxx_dummy_rx_lock); - - if (!mpc8xxx_dummy_rx) - mpc8xxx_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); - if (mpc8xxx_dummy_rx) - mpc8xxx_dummy_rx_refcnt++; - - mutex_unlock(&mpc8xxx_dummy_rx_lock); - - return mpc8xxx_dummy_rx; -} - -static void mpc8xxx_spi_free_dummy_rx(void) -{ - mutex_lock(&mpc8xxx_dummy_rx_lock); - - switch (mpc8xxx_dummy_rx_refcnt) { - case 0: - WARN_ON(1); - break; - case 1: - kfree(mpc8xxx_dummy_rx); - mpc8xxx_dummy_rx = NULL; - /* fall through */ - default: - mpc8xxx_dummy_rx_refcnt--; - break; - } - - mutex_unlock(&mpc8xxx_dummy_rx_lock); -} - -static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) -{ - struct device *dev = mspi->dev; - struct device_node *np = dev->of_node; - const u32 *iprop; - int size; - unsigned long spi_base_ofs; - unsigned long pram_ofs = -ENOMEM; - - /* Can't use of_address_to_resource(), QE muram isn't at 0. */ - iprop = of_get_property(np, "reg", &size); - - /* QE with a fixed pram location? */ - if (mspi->flags & SPI_QE && iprop && size == sizeof(*iprop) * 4) - return cpm_muram_alloc_fixed(iprop[2], SPI_PRAM_SIZE); - - /* QE but with a dynamic pram location? */ - if (mspi->flags & SPI_QE) { - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); - qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, mspi->subblock, - QE_CR_PROTOCOL_UNSPECIFIED, pram_ofs); - return pram_ofs; - } - - /* CPM1 and CPM2 pram must be at a fixed addr. */ - if (!iprop || size != sizeof(*iprop) * 4) - return -ENOMEM; - - spi_base_ofs = cpm_muram_alloc_fixed(iprop[2], 2); - if (IS_ERR_VALUE(spi_base_ofs)) - return -ENOMEM; - - if (mspi->flags & SPI_CPM2) { - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); - if (!IS_ERR_VALUE(pram_ofs)) { - u16 __iomem *spi_base = cpm_muram_addr(spi_base_ofs); - - out_be16(spi_base, pram_ofs); - } - } else { - struct spi_pram __iomem *pram = cpm_muram_addr(spi_base_ofs); - u16 rpbase = in_be16(&pram->rpbase); - - /* Microcode relocation patch applied? */ - if (rpbase) - pram_ofs = rpbase; - else - return spi_base_ofs; - } - - cpm_muram_free(spi_base_ofs); - return pram_ofs; -} - -static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) -{ - struct device *dev = mspi->dev; - struct device_node *np = dev->of_node; - const u32 *iprop; - int size; - unsigned long pram_ofs; - unsigned long bds_ofs; - - if (!(mspi->flags & SPI_CPM_MODE)) - return 0; - - if (!mpc8xxx_spi_alloc_dummy_rx()) - return -ENOMEM; - - if (mspi->flags & SPI_QE) { - iprop = of_get_property(np, "cell-index", &size); - if (iprop && size == sizeof(*iprop)) - mspi->subblock = *iprop; - - switch (mspi->subblock) { - default: - dev_warn(dev, "cell-index unspecified, assuming SPI1"); - /* fall through */ - case 0: - mspi->subblock = QE_CR_SUBBLOCK_SPI1; - break; - case 1: - mspi->subblock = QE_CR_SUBBLOCK_SPI2; - break; - } - } - - pram_ofs = mpc8xxx_spi_cpm_get_pram(mspi); - if (IS_ERR_VALUE(pram_ofs)) { - dev_err(dev, "can't allocate spi parameter ram\n"); - goto err_pram; - } - - bds_ofs = cpm_muram_alloc(sizeof(*mspi->tx_bd) + - sizeof(*mspi->rx_bd), 8); - if (IS_ERR_VALUE(bds_ofs)) { - dev_err(dev, "can't allocate bds\n"); - goto err_bds; - } - - mspi->dma_dummy_tx = dma_map_single(dev, empty_zero_page, PAGE_SIZE, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, mspi->dma_dummy_tx)) { - dev_err(dev, "unable to map dummy tx buffer\n"); - goto err_dummy_tx; - } - - mspi->dma_dummy_rx = dma_map_single(dev, mpc8xxx_dummy_rx, SPI_MRBLR, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { - dev_err(dev, "unable to map dummy rx buffer\n"); - goto err_dummy_rx; - } - - mspi->pram = cpm_muram_addr(pram_ofs); - - mspi->tx_bd = cpm_muram_addr(bds_ofs); - mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd)); - - /* Initialize parameter ram. */ - out_be16(&mspi->pram->tbase, cpm_muram_offset(mspi->tx_bd)); - out_be16(&mspi->pram->rbase, cpm_muram_offset(mspi->rx_bd)); - out_8(&mspi->pram->tfcr, CPMFCR_EB | CPMFCR_GBL); - out_8(&mspi->pram->rfcr, CPMFCR_EB | CPMFCR_GBL); - out_be16(&mspi->pram->mrblr, SPI_MRBLR); - out_be32(&mspi->pram->rstate, 0); - out_be32(&mspi->pram->rdp, 0); - out_be16(&mspi->pram->rbptr, 0); - out_be16(&mspi->pram->rbc, 0); - out_be32(&mspi->pram->rxtmp, 0); - out_be32(&mspi->pram->tstate, 0); - out_be32(&mspi->pram->tdp, 0); - out_be16(&mspi->pram->tbptr, 0); - out_be16(&mspi->pram->tbc, 0); - out_be32(&mspi->pram->txtmp, 0); - - return 0; - -err_dummy_rx: - dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); -err_dummy_tx: - cpm_muram_free(bds_ofs); -err_bds: - cpm_muram_free(pram_ofs); -err_pram: - mpc8xxx_spi_free_dummy_rx(); - return -ENOMEM; -} - -static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) -{ - struct device *dev = mspi->dev; - - dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); - dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); - cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); - cpm_muram_free(cpm_muram_offset(mspi->pram)); - mpc8xxx_spi_free_dummy_rx(); -} - -static const char *mpc8xxx_spi_strmode(unsigned int flags) -{ - if (flags & SPI_QE_CPU_MODE) { - return "QE CPU"; - } else if (flags & SPI_CPM_MODE) { - if (flags & SPI_QE) - return "QE"; - else if (flags & SPI_CPM2) - return "CPM2"; - else - return "CPM1"; - } - return "CPU"; -} - -static struct spi_master * __devinit -mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) -{ - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct spi_master *master; - struct mpc8xxx_spi *mpc8xxx_spi; - u32 regval; - int ret = 0; - - master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); - if (master == NULL) { - ret = -ENOMEM; - goto err; - } - - dev_set_drvdata(dev, master); - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH - | SPI_LSB_FIRST | SPI_LOOP; - - master->setup = mpc8xxx_spi_setup; - master->transfer = mpc8xxx_spi_transfer; - master->cleanup = mpc8xxx_spi_cleanup; - master->dev.of_node = dev->of_node; - - mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->dev = dev; - mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; - mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; - mpc8xxx_spi->flags = pdata->flags; - mpc8xxx_spi->spibrg = pdata->sysclk; - - ret = mpc8xxx_spi_cpm_init(mpc8xxx_spi); - if (ret) - goto err_cpm_init; - - mpc8xxx_spi->rx_shift = 0; - mpc8xxx_spi->tx_shift = 0; - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { - mpc8xxx_spi->rx_shift = 16; - mpc8xxx_spi->tx_shift = 24; - } - - init_completion(&mpc8xxx_spi->done); - - mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); - if (mpc8xxx_spi->base == NULL) { - ret = -ENOMEM; - goto err_ioremap; - } - - mpc8xxx_spi->irq = irq; - - /* Register for SPI Interrupt */ - ret = request_irq(mpc8xxx_spi->irq, mpc8xxx_spi_irq, - 0, "mpc8xxx_spi", mpc8xxx_spi); - - if (ret != 0) - goto unmap_io; - - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; - - /* SPI controller initializations */ - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->command, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, 0xffffffff); - - /* Enable SPI interface */ - regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; - if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) - regval |= SPMODE_OP; - - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval); - spin_lock_init(&mpc8xxx_spi->lock); - init_completion(&mpc8xxx_spi->done); - INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); - INIT_LIST_HEAD(&mpc8xxx_spi->queue); - - mpc8xxx_spi->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (mpc8xxx_spi->workqueue == NULL) { - ret = -EBUSY; - goto free_irq; - } - - ret = spi_register_master(master); - if (ret < 0) - goto unreg_master; - - dev_info(dev, "at 0x%p (irq = %d), %s mode\n", mpc8xxx_spi->base, - mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); - - return master; - -unreg_master: - destroy_workqueue(mpc8xxx_spi->workqueue); -free_irq: - free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); -unmap_io: - iounmap(mpc8xxx_spi->base); -err_ioremap: - mpc8xxx_spi_cpm_free(mpc8xxx_spi); -err_cpm_init: - spi_master_put(master); -err: - return ERR_PTR(ret); -} - -static int __devexit mpc8xxx_spi_remove(struct device *dev) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - struct spi_master *master; - - master = dev_get_drvdata(dev); - mpc8xxx_spi = spi_master_get_devdata(master); - - flush_workqueue(mpc8xxx_spi->workqueue); - destroy_workqueue(mpc8xxx_spi->workqueue); - spi_unregister_master(master); - - free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); - iounmap(mpc8xxx_spi->base); - mpc8xxx_spi_cpm_free(mpc8xxx_spi); - - return 0; -} - -struct mpc8xxx_spi_probe_info { - struct fsl_spi_platform_data pdata; - int *gpios; - bool *alow_flags; -}; - -static struct mpc8xxx_spi_probe_info * -to_of_pinfo(struct fsl_spi_platform_data *pdata) -{ - return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); -} - -static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) -{ - struct device *dev = spi->dev.parent; - struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); - u16 cs = spi->chip_select; - int gpio = pinfo->gpios[cs]; - bool alow = pinfo->alow_flags[cs]; - - gpio_set_value(gpio, on ^ alow); -} - -static int of_mpc8xxx_spi_get_chipselects(struct device *dev) -{ - struct device_node *np = dev->of_node; - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); - unsigned int ngpios; - int i = 0; - int ret; - - ngpios = of_gpio_count(np); - if (!ngpios) { - /* - * SPI w/o chip-select line. One SPI device is still permitted - * though. - */ - pdata->max_chipselect = 1; - return 0; - } - - pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL); - if (!pinfo->gpios) - return -ENOMEM; - memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios)); - - pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags), - GFP_KERNEL); - if (!pinfo->alow_flags) { - ret = -ENOMEM; - goto err_alloc_flags; - } - - for (; i < ngpios; i++) { - int gpio; - enum of_gpio_flags flags; - - gpio = of_get_gpio_flags(np, i, &flags); - if (!gpio_is_valid(gpio)) { - dev_err(dev, "invalid gpio #%d: %d\n", i, gpio); - ret = gpio; - goto err_loop; - } - - ret = gpio_request(gpio, dev_name(dev)); - if (ret) { - dev_err(dev, "can't request gpio #%d: %d\n", i, ret); - goto err_loop; - } - - pinfo->gpios[i] = gpio; - pinfo->alow_flags[i] = flags & OF_GPIO_ACTIVE_LOW; - - ret = gpio_direction_output(pinfo->gpios[i], - pinfo->alow_flags[i]); - if (ret) { - dev_err(dev, "can't set output direction for gpio " - "#%d: %d\n", i, ret); - goto err_loop; - } - } - - pdata->max_chipselect = ngpios; - pdata->cs_control = mpc8xxx_spi_cs_control; - - return 0; - -err_loop: - while (i >= 0) { - if (gpio_is_valid(pinfo->gpios[i])) - gpio_free(pinfo->gpios[i]); - i--; - } - - kfree(pinfo->alow_flags); - pinfo->alow_flags = NULL; -err_alloc_flags: - kfree(pinfo->gpios); - pinfo->gpios = NULL; - return ret; -} - -static int of_mpc8xxx_spi_free_chipselects(struct device *dev) -{ - struct fsl_spi_platform_data *pdata = dev->platform_data; - struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); - int i; - - if (!pinfo->gpios) - return 0; - - for (i = 0; i < pdata->max_chipselect; i++) { - if (gpio_is_valid(pinfo->gpios[i])) - gpio_free(pinfo->gpios[i]); - } - - kfree(pinfo->gpios); - kfree(pinfo->alow_flags); - return 0; -} - -static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, - const struct of_device_id *ofid) -{ - struct device *dev = &ofdev->dev; - struct device_node *np = ofdev->dev.of_node; - struct mpc8xxx_spi_probe_info *pinfo; - struct fsl_spi_platform_data *pdata; - struct spi_master *master; - struct resource mem; - struct resource irq; - const void *prop; - int ret = -ENOMEM; - - pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); - if (!pinfo) - return -ENOMEM; - - pdata = &pinfo->pdata; - dev->platform_data = pdata; - - /* Allocate bus num dynamically. */ - pdata->bus_num = -1; - - /* SPI controller is either clocked from QE or SoC clock. */ - pdata->sysclk = get_brgfreq(); - if (pdata->sysclk == -1) { - pdata->sysclk = fsl_get_sys_freq(); - if (pdata->sysclk == -1) { - ret = -ENODEV; - goto err_clk; - } - } - - prop = of_get_property(np, "mode", NULL); - if (prop && !strcmp(prop, "cpu-qe")) - pdata->flags = SPI_QE_CPU_MODE; - else if (prop && !strcmp(prop, "qe")) - pdata->flags = SPI_CPM_MODE | SPI_QE; - else if (of_device_is_compatible(np, "fsl,cpm2-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM2; - else if (of_device_is_compatible(np, "fsl,cpm1-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM1; - - ret = of_mpc8xxx_spi_get_chipselects(dev); - if (ret) - goto err; - - ret = of_address_to_resource(np, 0, &mem); - if (ret) - goto err; - - ret = of_irq_to_resource(np, 0, &irq); - if (!ret) { - ret = -EINVAL; - goto err; - } - - master = mpc8xxx_spi_probe(dev, &mem, irq.start); - if (IS_ERR(master)) { - ret = PTR_ERR(master); - goto err; - } - - return 0; - -err: - of_mpc8xxx_spi_free_chipselects(dev); -err_clk: - kfree(pinfo); - return ret; -} - -static int __devexit of_mpc8xxx_spi_remove(struct platform_device *ofdev) -{ - int ret; - - ret = mpc8xxx_spi_remove(&ofdev->dev); - if (ret) - return ret; - of_mpc8xxx_spi_free_chipselects(&ofdev->dev); - return 0; -} - -static const struct of_device_id of_mpc8xxx_spi_match[] = { - { .compatible = "fsl,spi" }, - {}, -}; -MODULE_DEVICE_TABLE(of, of_mpc8xxx_spi_match); - -static struct of_platform_driver of_mpc8xxx_spi_driver = { - .driver = { - .name = "mpc8xxx_spi", - .owner = THIS_MODULE, - .of_match_table = of_mpc8xxx_spi_match, - }, - .probe = of_mpc8xxx_spi_probe, - .remove = __devexit_p(of_mpc8xxx_spi_remove), -}; - -#ifdef CONFIG_MPC832x_RDB -/* - * XXX XXX XXX - * This is "legacy" platform driver, was used by the MPC8323E-RDB boards - * only. The driver should go away soon, since newer MPC8323E-RDB's device - * tree can work with OpenFirmware driver. But for now we support old trees - * as well. - */ -static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) -{ - struct resource *mem; - int irq; - struct spi_master *master; - - if (!pdev->dev.platform_data) - return -EINVAL; - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) - return -EINVAL; - - irq = platform_get_irq(pdev, 0); - if (irq <= 0) - return -EINVAL; - - master = mpc8xxx_spi_probe(&pdev->dev, mem, irq); - if (IS_ERR(master)) - return PTR_ERR(master); - return 0; -} - -static int __devexit plat_mpc8xxx_spi_remove(struct platform_device *pdev) -{ - return mpc8xxx_spi_remove(&pdev->dev); -} - -MODULE_ALIAS("platform:mpc8xxx_spi"); -static struct platform_driver mpc8xxx_spi_driver = { - .probe = plat_mpc8xxx_spi_probe, - .remove = __devexit_p(plat_mpc8xxx_spi_remove), - .driver = { - .name = "mpc8xxx_spi", - .owner = THIS_MODULE, - }, -}; - -static bool legacy_driver_failed; - -static void __init legacy_driver_register(void) -{ - legacy_driver_failed = platform_driver_register(&mpc8xxx_spi_driver); -} - -static void __exit legacy_driver_unregister(void) -{ - if (legacy_driver_failed) - return; - platform_driver_unregister(&mpc8xxx_spi_driver); -} -#else -static void __init legacy_driver_register(void) {} -static void __exit legacy_driver_unregister(void) {} -#endif /* CONFIG_MPC832x_RDB */ - -static int __init mpc8xxx_spi_init(void) -{ - legacy_driver_register(); - return of_register_platform_driver(&of_mpc8xxx_spi_driver); -} - -static void __exit mpc8xxx_spi_exit(void) -{ - of_unregister_platform_driver(&of_mpc8xxx_spi_driver); - legacy_driver_unregister(); -} - -module_init(mpc8xxx_spi_init); -module_exit(mpc8xxx_spi_exit); - -MODULE_AUTHOR("Kumar Gala"); -MODULE_DESCRIPTION("Simple MPC8xxx SPI Driver"); -MODULE_LICENSE("GPL"); -- cgit v0.10.2 From b36ece832512c1a0afa54ff0a56d63492a1caf08 Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Tue, 12 Oct 2010 18:18:31 +0800 Subject: spi/mpc8xxx: refactor the common code for SPI/eSPI controller Refactor the common code in file spi_fsl_spi.c to spi_fsl_lib.c used by SPI/eSPI controller driver as a library, and leave the QE/CPM SPI controller code in the SPI controller driver spi_fsl_spi.c. Because the register map of the SPI controller and eSPI controller is so different, also leave the code operated the register to the driver code, not the common code. Signed-off-by: Mingkai Hu Signed-off-by: Grant Likely diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e8f02a6..0e66194 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -182,9 +182,14 @@ config SPI_MPC512x_PSC This enables using the Freescale MPC5121 Programmable Serial Controller in SPI master mode. +config SPI_FSL_LIB + tristate + depends on FSL_SOC + config SPI_FSL_SPI tristate "Freescale SPI controller" depends on FSL_SOC + select SPI_FSL_LIB help This enables using the Freescale SPI controllers in master mode. MPC83xx platform uses the controller in cpu mode or CPM/QE mode. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index c6a56c7..54bd95d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_SPI_PL022) += amba-pl022.o obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o +obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o diff --git a/drivers/spi/spi_fsl_lib.c b/drivers/spi/spi_fsl_lib.c new file mode 100644 index 0000000..5cd741f --- /dev/null +++ b/drivers/spi/spi_fsl_lib.c @@ -0,0 +1,237 @@ +/* + * Freescale SPI/eSPI controller driver library. + * + * Maintainer: Kumar Gala + * + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "spi_fsl_lib.h" + +#define MPC8XXX_SPI_RX_BUF(type) \ +void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + type *rx = mpc8xxx_spi->rx; \ + *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ + mpc8xxx_spi->rx = rx; \ +} + +#define MPC8XXX_SPI_TX_BUF(type) \ +u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + u32 data; \ + const type *tx = mpc8xxx_spi->tx; \ + if (!tx) \ + return 0; \ + data = *tx++ << mpc8xxx_spi->tx_shift; \ + mpc8xxx_spi->tx = tx; \ + return data; \ +} + +MPC8XXX_SPI_RX_BUF(u8) +MPC8XXX_SPI_RX_BUF(u16) +MPC8XXX_SPI_RX_BUF(u32) +MPC8XXX_SPI_TX_BUF(u8) +MPC8XXX_SPI_TX_BUF(u16) +MPC8XXX_SPI_TX_BUF(u32) + +struct mpc8xxx_spi_probe_info *to_of_pinfo(struct fsl_spi_platform_data *pdata) +{ + return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); +} + +void mpc8xxx_spi_work(struct work_struct *work) +{ + struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, + work); + + spin_lock_irq(&mpc8xxx_spi->lock); + while (!list_empty(&mpc8xxx_spi->queue)) { + struct spi_message *m = container_of(mpc8xxx_spi->queue.next, + struct spi_message, queue); + + list_del_init(&m->queue); + spin_unlock_irq(&mpc8xxx_spi->lock); + + if (mpc8xxx_spi->spi_do_one_msg) + mpc8xxx_spi->spi_do_one_msg(m); + + spin_lock_irq(&mpc8xxx_spi->lock); + } + spin_unlock_irq(&mpc8xxx_spi->lock); +} + +int mpc8xxx_spi_transfer(struct spi_device *spi, + struct spi_message *m) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spin_lock_irqsave(&mpc8xxx_spi->lock, flags); + list_add_tail(&m->queue, &mpc8xxx_spi->queue); + queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); + spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); + + return 0; +} + +void mpc8xxx_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +const char *mpc8xxx_spi_strmode(unsigned int flags) +{ + if (flags & SPI_QE_CPU_MODE) { + return "QE CPU"; + } else if (flags & SPI_CPM_MODE) { + if (flags & SPI_QE) + return "QE"; + else if (flags & SPI_CPM2) + return "CPM2"; + else + return "CPM1"; + } + return "CPU"; +} + +int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, + unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + int ret = 0; + + master = dev_get_drvdata(dev); + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH + | SPI_LSB_FIRST | SPI_LOOP; + + master->transfer = mpc8xxx_spi_transfer; + master->cleanup = mpc8xxx_spi_cleanup; + master->dev.of_node = dev->of_node; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->dev = dev; + mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; + mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; + mpc8xxx_spi->flags = pdata->flags; + mpc8xxx_spi->spibrg = pdata->sysclk; + mpc8xxx_spi->irq = irq; + + mpc8xxx_spi->rx_shift = 0; + mpc8xxx_spi->tx_shift = 0; + + init_completion(&mpc8xxx_spi->done); + + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->max_chipselect; + + spin_lock_init(&mpc8xxx_spi->lock); + init_completion(&mpc8xxx_spi->done); + INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); + INIT_LIST_HEAD(&mpc8xxx_spi->queue); + + mpc8xxx_spi->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (mpc8xxx_spi->workqueue == NULL) { + ret = -EBUSY; + goto err; + } + + return 0; + +err: + return ret; +} + +int __devexit mpc8xxx_spi_remove(struct device *dev) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct spi_master *master; + + master = dev_get_drvdata(dev); + mpc8xxx_spi = spi_master_get_devdata(master); + + flush_workqueue(mpc8xxx_spi->workqueue); + destroy_workqueue(mpc8xxx_spi->workqueue); + spi_unregister_master(master); + + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); + + if (mpc8xxx_spi->spi_remove) + mpc8xxx_spi->spi_remove(mpc8xxx_spi); + + return 0; +} + +int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct mpc8xxx_spi_probe_info *pinfo; + struct fsl_spi_platform_data *pdata; + const void *prop; + int ret = -ENOMEM; + + pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); + if (!pinfo) + return -ENOMEM; + + pdata = &pinfo->pdata; + dev->platform_data = pdata; + + /* Allocate bus num dynamically. */ + pdata->bus_num = -1; + + /* SPI controller is either clocked from QE or SoC clock. */ + pdata->sysclk = get_brgfreq(); + if (pdata->sysclk == -1) { + pdata->sysclk = fsl_get_sys_freq(); + if (pdata->sysclk == -1) { + ret = -ENODEV; + goto err; + } + } + + prop = of_get_property(np, "mode", NULL); + if (prop && !strcmp(prop, "cpu-qe")) + pdata->flags = SPI_QE_CPU_MODE; + else if (prop && !strcmp(prop, "qe")) + pdata->flags = SPI_CPM_MODE | SPI_QE; + else if (of_device_is_compatible(np, "fsl,cpm2-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM2; + else if (of_device_is_compatible(np, "fsl,cpm1-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM1; + + return 0; + +err: + kfree(pinfo); + return ret; +} diff --git a/drivers/spi/spi_fsl_lib.h b/drivers/spi/spi_fsl_lib.h new file mode 100644 index 0000000..6ae8949 --- /dev/null +++ b/drivers/spi/spi_fsl_lib.h @@ -0,0 +1,119 @@ +/* + * Freescale SPI/eSPI controller driver library. + * + * Maintainer: Kumar Gala + * + * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __SPI_FSL_LIB_H__ +#define __SPI_FSL_LIB_H__ + +/* SPI/eSPI Controller driver's private data. */ +struct mpc8xxx_spi { + struct device *dev; + void *reg_base; + + /* rx & tx bufs from the spi_transfer */ + const void *tx; + void *rx; + + int subblock; + struct spi_pram __iomem *pram; + struct cpm_buf_desc __iomem *tx_bd; + struct cpm_buf_desc __iomem *rx_bd; + + struct spi_transfer *xfer_in_progress; + + /* dma addresses for CPM transfers */ + dma_addr_t tx_dma; + dma_addr_t rx_dma; + bool map_tx_dma; + bool map_rx_dma; + + dma_addr_t dma_dummy_tx; + dma_addr_t dma_dummy_rx; + + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32(*get_tx) (struct mpc8xxx_spi *); + + /* hooks for different controller driver */ + void (*spi_do_one_msg) (struct spi_message *m); + void (*spi_remove) (struct mpc8xxx_spi *mspi); + + unsigned int count; + unsigned int irq; + + unsigned nsecs; /* (clock cycle time)/2 */ + + u32 spibrg; /* SPIBRG input clock */ + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + + unsigned int flags; + + struct workqueue_struct *workqueue; + struct work_struct work; + + struct list_head queue; + spinlock_t lock; + + struct completion done; +}; + +struct spi_mpc8xxx_cs { + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32 (*get_tx) (struct mpc8xxx_spi *); + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + u32 hw_mode; /* Holds HW mode register settings */ +}; + +static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) +{ + out_be32(reg, val); +} + +static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) +{ + return in_be32(reg); +} + +struct mpc8xxx_spi_probe_info { + struct fsl_spi_platform_data pdata; + int *gpios; + bool *alow_flags; +}; + +extern u32 mpc8xxx_spi_tx_buf_u8(struct mpc8xxx_spi *mpc8xxx_spi); +extern u32 mpc8xxx_spi_tx_buf_u16(struct mpc8xxx_spi *mpc8xxx_spi); +extern u32 mpc8xxx_spi_tx_buf_u32(struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u8(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u16(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u32(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); + +extern struct mpc8xxx_spi_probe_info *to_of_pinfo( + struct fsl_spi_platform_data *pdata); +extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi, + struct spi_transfer *t, unsigned int len); +extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m); +extern void mpc8xxx_spi_cleanup(struct spi_device *spi); +extern const char *mpc8xxx_spi_strmode(unsigned int flags); +extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, + unsigned int irq); +extern int mpc8xxx_spi_remove(struct device *dev); +extern int of_mpc8xxx_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid); + +#endif /* __SPI_FSL_LIB_H__ */ diff --git a/drivers/spi/spi_fsl_spi.c b/drivers/spi/spi_fsl_spi.c index 1dd86b8..7ca52d3 100644 --- a/drivers/spi/spi_fsl_spi.c +++ b/drivers/spi/spi_fsl_spi.c @@ -1,9 +1,10 @@ /* - * MPC8xxx SPI controller driver. + * Freescale SPI controller driver. * * Maintainer: Kumar Gala * * Copyright (C) 2006 Polycom, Inc. + * Copyright 2010 Freescale Semiconductor, Inc. * * CPM SPI and QE buffer descriptors mode support: * Copyright (c) 2009 MontaVista Software, Inc. @@ -15,18 +16,11 @@ * option) any later version. */ #include -#include #include #include -#include -#include -#include -#include -#include #include #include #include -#include #include #include #include @@ -38,12 +32,12 @@ #include #include #include -#include #include #include #include -#include + +#include "spi_fsl_lib.h" /* CPM1 and CPM2 are mutually exclusive. */ #ifdef CONFIG_CPM1 @@ -55,7 +49,7 @@ #endif /* SPI Controller registers */ -struct mpc8xxx_spi_reg { +struct fsl_spi_reg { u8 res1[0x20]; __be32 mode; __be32 event; @@ -80,7 +74,7 @@ struct mpc8xxx_spi_reg { /* * Default for SPI Mode: - * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk + * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk */ #define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) @@ -102,112 +96,16 @@ struct mpc8xxx_spi_reg { #define SPI_PRAM_SIZE 0x100 #define SPI_MRBLR ((unsigned int)PAGE_SIZE) -/* SPI Controller driver's private data. */ -struct mpc8xxx_spi { - struct device *dev; - struct mpc8xxx_spi_reg __iomem *base; - - /* rx & tx bufs from the spi_transfer */ - const void *tx; - void *rx; - - int subblock; - struct spi_pram __iomem *pram; - struct cpm_buf_desc __iomem *tx_bd; - struct cpm_buf_desc __iomem *rx_bd; - - struct spi_transfer *xfer_in_progress; - - /* dma addresses for CPM transfers */ - dma_addr_t tx_dma; - dma_addr_t rx_dma; - bool map_tx_dma; - bool map_rx_dma; - - dma_addr_t dma_dummy_tx; - dma_addr_t dma_dummy_rx; - - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32(*get_tx) (struct mpc8xxx_spi *); - - unsigned int count; - unsigned int irq; - - unsigned nsecs; /* (clock cycle time)/2 */ - - u32 spibrg; /* SPIBRG input clock */ - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - - unsigned int flags; - - struct workqueue_struct *workqueue; - struct work_struct work; - - struct list_head queue; - spinlock_t lock; - - struct completion done; -}; - -static void *mpc8xxx_dummy_rx; -static DEFINE_MUTEX(mpc8xxx_dummy_rx_lock); -static int mpc8xxx_dummy_rx_refcnt; - -struct spi_mpc8xxx_cs { - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32 (*get_tx) (struct mpc8xxx_spi *); - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - u32 hw_mode; /* Holds HW mode register settings */ -}; - -static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) -{ - out_be32(reg, val); -} - -static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) -{ - return in_be32(reg); -} - -#define MPC83XX_SPI_RX_BUF(type) \ -static \ -void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - type *rx = mpc8xxx_spi->rx; \ - *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ - mpc8xxx_spi->rx = rx; \ -} - -#define MPC83XX_SPI_TX_BUF(type) \ -static \ -u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - u32 data; \ - const type *tx = mpc8xxx_spi->tx; \ - if (!tx) \ - return 0; \ - data = *tx++ << mpc8xxx_spi->tx_shift; \ - mpc8xxx_spi->tx = tx; \ - return data; \ -} +static void *fsl_dummy_rx; +static DEFINE_MUTEX(fsl_dummy_rx_lock); +static int fsl_dummy_rx_refcnt; -MPC83XX_SPI_RX_BUF(u8) -MPC83XX_SPI_RX_BUF(u16) -MPC83XX_SPI_RX_BUF(u32) -MPC83XX_SPI_TX_BUF(u8) -MPC83XX_SPI_TX_BUF(u16) -MPC83XX_SPI_TX_BUF(u32) - -static void mpc8xxx_spi_change_mode(struct spi_device *spi) +static void fsl_spi_change_mode(struct spi_device *spi) { struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); struct spi_mpc8xxx_cs *cs = spi->controller_state; - __be32 __iomem *mode = &mspi->base->mode; + struct fsl_spi_reg *reg_base = mspi->reg_base; + __be32 __iomem *mode = ®_base->mode; unsigned long flags; if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) @@ -238,7 +136,7 @@ static void mpc8xxx_spi_change_mode(struct spi_device *spi) local_irq_restore(flags); } -static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) +static void fsl_spi_chipselect(struct spi_device *spi, int value) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; @@ -256,18 +154,17 @@ static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) mpc8xxx_spi->get_rx = cs->get_rx; mpc8xxx_spi->get_tx = cs->get_tx; - mpc8xxx_spi_change_mode(spi); + fsl_spi_change_mode(spi); if (pdata->cs_control) pdata->cs_control(spi, pol); } } -static int -mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - struct mpc8xxx_spi *mpc8xxx_spi, - int bits_per_word) +static int mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + struct mpc8xxx_spi *mpc8xxx_spi, + int bits_per_word) { cs->rx_shift = 0; cs->tx_shift = 0; @@ -307,10 +204,9 @@ mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, return bits_per_word; } -static int -mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - int bits_per_word) +static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + int bits_per_word) { /* QE uses Little Endian for words > 8 * so transform all words > 8 into 8 bits @@ -326,13 +222,13 @@ mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, return bits_per_word; } -static -int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +static int fsl_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) { struct mpc8xxx_spi *mpc8xxx_spi; - int bits_per_word; + int bits_per_word = 0; u8 pm; - u32 hz; + u32 hz = 0; struct spi_mpc8xxx_cs *cs = spi->controller_state; mpc8xxx_spi = spi_master_get_devdata(spi->master); @@ -340,9 +236,6 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if (t) { bits_per_word = t->bits_per_word; hz = t->speed_hz; - } else { - bits_per_word = 0; - hz = 0; } /* spi_transfer level calls that work per-word */ @@ -388,23 +281,25 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) hz, mpc8xxx_spi->spibrg / 1024); if (pm > 16) pm = 16; - } else + } else { pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + } if (pm) pm--; cs->hw_mode |= SPMODE_PM(pm); - mpc8xxx_spi_change_mode(spi); + fsl_spi_change_mode(spi); return 0; } -static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) { struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; unsigned int xfer_len = min(mspi->count, SPI_MRBLR); unsigned int xfer_ofs; + struct fsl_spi_reg *reg_base = mspi->reg_base; xfer_ofs = mspi->xfer_in_progress->len - mspi->count; @@ -424,13 +319,14 @@ static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) BD_SC_LAST); /* start transfer */ - mpc8xxx_spi_write_reg(&mspi->base->command, SPCOM_STR); + mpc8xxx_spi_write_reg(®_base->command, SPCOM_STR); } -static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, +static int fsl_spi_cpm_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, bool is_dma_mapped) { struct device *dev = mspi->dev; + struct fsl_spi_reg *reg_base = mspi->reg_base; if (is_dma_mapped) { mspi->map_tx_dma = 0; @@ -475,13 +371,13 @@ static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, } /* enable rx ints */ - mpc8xxx_spi_write_reg(&mspi->base->mask, SPIE_RXB); + mpc8xxx_spi_write_reg(®_base->mask, SPIE_RXB); mspi->xfer_in_progress = t; mspi->count = t->len; /* start CPM transfers */ - mpc8xxx_spi_cpm_bufs_start(mspi); + fsl_spi_cpm_bufs_start(mspi); return 0; @@ -491,7 +387,7 @@ err_rx_dma: return -ENOMEM; } -static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct spi_transfer *t = mspi->xfer_in_progress; @@ -503,31 +399,34 @@ static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) mspi->xfer_in_progress = NULL; } -static int mpc8xxx_spi_cpu_bufs(struct mpc8xxx_spi *mspi, +static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, unsigned int len) { u32 word; + struct fsl_spi_reg *reg_base = mspi->reg_base; mspi->count = len; /* enable rx ints */ - mpc8xxx_spi_write_reg(&mspi->base->mask, SPIM_NE); + mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); /* transmit word */ word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(&mspi->base->transmit, word); + mpc8xxx_spi_write_reg(®_base->transmit, word); return 0; } -static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, +static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, bool is_dma_mapped) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_spi_reg *reg_base; unsigned int len = t->len; u8 bits_per_word; int ret; + reg_base = mpc8xxx_spi->reg_base; bits_per_word = spi->bits_per_word; if (t->bits_per_word) bits_per_word = t->bits_per_word; @@ -551,24 +450,24 @@ static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, INIT_COMPLETION(mpc8xxx_spi->done); if (mpc8xxx_spi->flags & SPI_CPM_MODE) - ret = mpc8xxx_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); + ret = fsl_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); else - ret = mpc8xxx_spi_cpu_bufs(mpc8xxx_spi, t, len); + ret = fsl_spi_cpu_bufs(mpc8xxx_spi, t, len); if (ret) return ret; wait_for_completion(&mpc8xxx_spi->done); /* disable rx ints */ - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); if (mpc8xxx_spi->flags & SPI_CPM_MODE) - mpc8xxx_spi_cpm_bufs_complete(mpc8xxx_spi); + fsl_spi_cpm_bufs_complete(mpc8xxx_spi); return mpc8xxx_spi->count; } -static void mpc8xxx_spi_do_one_msg(struct spi_message *m) +static void fsl_spi_do_one_msg(struct spi_message *m) { struct spi_device *spi = m->spi; struct spi_transfer *t; @@ -584,18 +483,18 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) status = -EINVAL; if (cs_change) - status = mpc8xxx_spi_setup_transfer(spi, t); + status = fsl_spi_setup_transfer(spi, t); if (status < 0) break; } if (cs_change) { - mpc8xxx_spi_chipselect(spi, BITBANG_CS_ACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_ACTIVE); ndelay(nsecs); } cs_change = t->cs_change; if (t->len) - status = mpc8xxx_spi_bufs(spi, t, m->is_dma_mapped); + status = fsl_spi_bufs(spi, t, m->is_dma_mapped); if (status) { status = -EMSGSIZE; break; @@ -607,7 +506,7 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) if (cs_change) { ndelay(nsecs); - mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); ndelay(nsecs); } } @@ -617,35 +516,16 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) if (status || !cs_change) { ndelay(nsecs); - mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); } - mpc8xxx_spi_setup_transfer(spi, NULL); -} - -static void mpc8xxx_spi_work(struct work_struct *work) -{ - struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, - work); - - spin_lock_irq(&mpc8xxx_spi->lock); - while (!list_empty(&mpc8xxx_spi->queue)) { - struct spi_message *m = container_of(mpc8xxx_spi->queue.next, - struct spi_message, queue); - - list_del_init(&m->queue); - spin_unlock_irq(&mpc8xxx_spi->lock); - - mpc8xxx_spi_do_one_msg(m); - - spin_lock_irq(&mpc8xxx_spi->lock); - } - spin_unlock_irq(&mpc8xxx_spi->lock); + fsl_spi_setup_transfer(spi, NULL); } -static int mpc8xxx_spi_setup(struct spi_device *spi) +static int fsl_spi_setup(struct spi_device *spi) { struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_spi_reg *reg_base; int retval; u32 hw_mode; struct spi_mpc8xxx_cs *cs = spi->controller_state; @@ -661,8 +541,10 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) } mpc8xxx_spi = spi_master_get_devdata(spi->master); + reg_base = mpc8xxx_spi->reg_base; + hw_mode = cs->hw_mode; /* Save original settings */ - cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); + cs->hw_mode = mpc8xxx_spi_read_reg(®_base->mode); /* mask out bits we are going to set */ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH | SPMODE_REV | SPMODE_LOOP); @@ -676,7 +558,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) if (spi->mode & SPI_LOOP) cs->hw_mode |= SPMODE_LOOP; - retval = mpc8xxx_spi_setup_transfer(spi, NULL); + retval = fsl_spi_setup_transfer(spi, NULL); if (retval < 0) { cs->hw_mode = hw_mode; /* Restore settings */ return retval; @@ -684,9 +566,10 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) return 0; } -static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) +static void fsl_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) { u16 len; + struct fsl_spi_reg *reg_base = mspi->reg_base; dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); @@ -698,20 +581,22 @@ static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) } /* Clear the events */ - mpc8xxx_spi_write_reg(&mspi->base->event, events); + mpc8xxx_spi_write_reg(®_base->event, events); mspi->count -= len; if (mspi->count) - mpc8xxx_spi_cpm_bufs_start(mspi); + fsl_spi_cpm_bufs_start(mspi); else complete(&mspi->done); } -static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) { + struct fsl_spi_reg *reg_base = mspi->reg_base; + /* We need handle RX first */ if (events & SPIE_NE) { - u32 rx_data = mpc8xxx_spi_read_reg(&mspi->base->receive); + u32 rx_data = mpc8xxx_spi_read_reg(®_base->receive); if (mspi->rx) mspi->get_rx(rx_data, mspi); @@ -720,102 +605,80 @@ static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) if ((events & SPIE_NF) == 0) /* spin until TX is done */ while (((events = - mpc8xxx_spi_read_reg(&mspi->base->event)) & + mpc8xxx_spi_read_reg(®_base->event)) & SPIE_NF) == 0) cpu_relax(); /* Clear the events */ - mpc8xxx_spi_write_reg(&mspi->base->event, events); + mpc8xxx_spi_write_reg(®_base->event, events); mspi->count -= 1; if (mspi->count) { u32 word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(&mspi->base->transmit, word); + mpc8xxx_spi_write_reg(®_base->transmit, word); } else { complete(&mspi->done); } } -static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data) +static irqreturn_t fsl_spi_irq(s32 irq, void *context_data) { struct mpc8xxx_spi *mspi = context_data; irqreturn_t ret = IRQ_NONE; u32 events; + struct fsl_spi_reg *reg_base = mspi->reg_base; /* Get interrupt events(tx/rx) */ - events = mpc8xxx_spi_read_reg(&mspi->base->event); + events = mpc8xxx_spi_read_reg(®_base->event); if (events) ret = IRQ_HANDLED; dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); if (mspi->flags & SPI_CPM_MODE) - mpc8xxx_spi_cpm_irq(mspi, events); + fsl_spi_cpm_irq(mspi, events); else - mpc8xxx_spi_cpu_irq(mspi, events); + fsl_spi_cpu_irq(mspi, events); return ret; } -static int mpc8xxx_spi_transfer(struct spi_device *spi, - struct spi_message *m) +static void *fsl_spi_alloc_dummy_rx(void) { - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - unsigned long flags; + mutex_lock(&fsl_dummy_rx_lock); - m->actual_length = 0; - m->status = -EINPROGRESS; + if (!fsl_dummy_rx) + fsl_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); + if (fsl_dummy_rx) + fsl_dummy_rx_refcnt++; - spin_lock_irqsave(&mpc8xxx_spi->lock, flags); - list_add_tail(&m->queue, &mpc8xxx_spi->queue); - queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); - spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); + mutex_unlock(&fsl_dummy_rx_lock); - return 0; + return fsl_dummy_rx; } - -static void mpc8xxx_spi_cleanup(struct spi_device *spi) +static void fsl_spi_free_dummy_rx(void) { - kfree(spi->controller_state); -} + mutex_lock(&fsl_dummy_rx_lock); -static void *mpc8xxx_spi_alloc_dummy_rx(void) -{ - mutex_lock(&mpc8xxx_dummy_rx_lock); - - if (!mpc8xxx_dummy_rx) - mpc8xxx_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); - if (mpc8xxx_dummy_rx) - mpc8xxx_dummy_rx_refcnt++; - - mutex_unlock(&mpc8xxx_dummy_rx_lock); - - return mpc8xxx_dummy_rx; -} - -static void mpc8xxx_spi_free_dummy_rx(void) -{ - mutex_lock(&mpc8xxx_dummy_rx_lock); - - switch (mpc8xxx_dummy_rx_refcnt) { + switch (fsl_dummy_rx_refcnt) { case 0: WARN_ON(1); break; case 1: - kfree(mpc8xxx_dummy_rx); - mpc8xxx_dummy_rx = NULL; + kfree(fsl_dummy_rx); + fsl_dummy_rx = NULL; /* fall through */ default: - mpc8xxx_dummy_rx_refcnt--; + fsl_dummy_rx_refcnt--; break; } - mutex_unlock(&mpc8xxx_dummy_rx_lock); + mutex_unlock(&fsl_dummy_rx_lock); } -static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) +static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct device_node *np = dev->of_node; @@ -869,7 +732,7 @@ static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) return pram_ofs; } -static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) +static int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct device_node *np = dev->of_node; @@ -881,7 +744,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) if (!(mspi->flags & SPI_CPM_MODE)) return 0; - if (!mpc8xxx_spi_alloc_dummy_rx()) + if (!fsl_spi_alloc_dummy_rx()) return -ENOMEM; if (mspi->flags & SPI_QE) { @@ -902,7 +765,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) } } - pram_ofs = mpc8xxx_spi_cpm_get_pram(mspi); + pram_ofs = fsl_spi_cpm_get_pram(mspi); if (IS_ERR_VALUE(pram_ofs)) { dev_err(dev, "can't allocate spi parameter ram\n"); goto err_pram; @@ -922,7 +785,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) goto err_dummy_tx; } - mspi->dma_dummy_rx = dma_map_single(dev, mpc8xxx_dummy_rx, SPI_MRBLR, + mspi->dma_dummy_rx = dma_map_single(dev, fsl_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { dev_err(dev, "unable to map dummy rx buffer\n"); @@ -960,11 +823,11 @@ err_dummy_tx: err_bds: cpm_muram_free(pram_ofs); err_pram: - mpc8xxx_spi_free_dummy_rx(); + fsl_spi_free_dummy_rx(); return -ENOMEM; } -static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; @@ -972,30 +835,22 @@ static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); cpm_muram_free(cpm_muram_offset(mspi->pram)); - mpc8xxx_spi_free_dummy_rx(); + fsl_spi_free_dummy_rx(); } -static const char *mpc8xxx_spi_strmode(unsigned int flags) +static void fsl_spi_remove(struct mpc8xxx_spi *mspi) { - if (flags & SPI_QE_CPU_MODE) { - return "QE CPU"; - } else if (flags & SPI_CPM_MODE) { - if (flags & SPI_QE) - return "QE"; - else if (flags & SPI_CPM2) - return "CPM2"; - else - return "CPM1"; - } - return "CPU"; + iounmap(mspi->reg_base); + fsl_spi_cpm_free(mspi); } -static struct spi_master * __devinit -mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) +static struct spi_master * __devinit fsl_spi_probe(struct device *dev, + struct resource *mem, unsigned int irq) { struct fsl_spi_platform_data *pdata = dev->platform_data; struct spi_master *master; struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_spi_reg *reg_base; u32 regval; int ret = 0; @@ -1007,132 +862,77 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) dev_set_drvdata(dev, master); - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH - | SPI_LSB_FIRST | SPI_LOOP; + ret = mpc8xxx_spi_probe(dev, mem, irq); + if (ret) + goto err_probe; - master->setup = mpc8xxx_spi_setup; - master->transfer = mpc8xxx_spi_transfer; - master->cleanup = mpc8xxx_spi_cleanup; - master->dev.of_node = dev->of_node; + master->setup = fsl_spi_setup; mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->dev = dev; - mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; - mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; - mpc8xxx_spi->flags = pdata->flags; - mpc8xxx_spi->spibrg = pdata->sysclk; + mpc8xxx_spi->spi_do_one_msg = fsl_spi_do_one_msg; + mpc8xxx_spi->spi_remove = fsl_spi_remove; + - ret = mpc8xxx_spi_cpm_init(mpc8xxx_spi); + ret = fsl_spi_cpm_init(mpc8xxx_spi); if (ret) goto err_cpm_init; - mpc8xxx_spi->rx_shift = 0; - mpc8xxx_spi->tx_shift = 0; if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { mpc8xxx_spi->rx_shift = 16; mpc8xxx_spi->tx_shift = 24; } - init_completion(&mpc8xxx_spi->done); - - mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); - if (mpc8xxx_spi->base == NULL) { + mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); + if (mpc8xxx_spi->reg_base == NULL) { ret = -ENOMEM; goto err_ioremap; } - mpc8xxx_spi->irq = irq; - /* Register for SPI Interrupt */ - ret = request_irq(mpc8xxx_spi->irq, mpc8xxx_spi_irq, - 0, "mpc8xxx_spi", mpc8xxx_spi); + ret = request_irq(mpc8xxx_spi->irq, fsl_spi_irq, + 0, "fsl_spi", mpc8xxx_spi); if (ret != 0) - goto unmap_io; + goto free_irq; - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; + reg_base = mpc8xxx_spi->reg_base; /* SPI controller initializations */ - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->command, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, 0xffffffff); + mpc8xxx_spi_write_reg(®_base->mode, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); + mpc8xxx_spi_write_reg(®_base->command, 0); + mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); /* Enable SPI interface */ regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) regval |= SPMODE_OP; - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval); - spin_lock_init(&mpc8xxx_spi->lock); - init_completion(&mpc8xxx_spi->done); - INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); - INIT_LIST_HEAD(&mpc8xxx_spi->queue); - - mpc8xxx_spi->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (mpc8xxx_spi->workqueue == NULL) { - ret = -EBUSY; - goto free_irq; - } + mpc8xxx_spi_write_reg(®_base->mode, regval); ret = spi_register_master(master); if (ret < 0) goto unreg_master; - dev_info(dev, "at 0x%p (irq = %d), %s mode\n", mpc8xxx_spi->base, + dev_info(dev, "at 0x%p (irq = %d), %s mode\n", reg_base, mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); return master; unreg_master: - destroy_workqueue(mpc8xxx_spi->workqueue); -free_irq: free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); -unmap_io: - iounmap(mpc8xxx_spi->base); +free_irq: + iounmap(mpc8xxx_spi->reg_base); err_ioremap: - mpc8xxx_spi_cpm_free(mpc8xxx_spi); + fsl_spi_cpm_free(mpc8xxx_spi); err_cpm_init: +err_probe: spi_master_put(master); err: return ERR_PTR(ret); } -static int __devexit mpc8xxx_spi_remove(struct device *dev) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - struct spi_master *master; - - master = dev_get_drvdata(dev); - mpc8xxx_spi = spi_master_get_devdata(master); - - flush_workqueue(mpc8xxx_spi->workqueue); - destroy_workqueue(mpc8xxx_spi->workqueue); - spi_unregister_master(master); - - free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); - iounmap(mpc8xxx_spi->base); - mpc8xxx_spi_cpm_free(mpc8xxx_spi); - - return 0; -} - -struct mpc8xxx_spi_probe_info { - struct fsl_spi_platform_data pdata; - int *gpios; - bool *alow_flags; -}; - -static struct mpc8xxx_spi_probe_info * -to_of_pinfo(struct fsl_spi_platform_data *pdata) -{ - return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); -} - -static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) +static void fsl_spi_cs_control(struct spi_device *spi, bool on) { struct device *dev = spi->dev.parent; struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); @@ -1143,7 +943,7 @@ static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) gpio_set_value(gpio, on ^ alow); } -static int of_mpc8xxx_spi_get_chipselects(struct device *dev) +static int of_fsl_spi_get_chipselects(struct device *dev) { struct device_node *np = dev->of_node; struct fsl_spi_platform_data *pdata = dev->platform_data; @@ -1204,7 +1004,7 @@ static int of_mpc8xxx_spi_get_chipselects(struct device *dev) } pdata->max_chipselect = ngpios; - pdata->cs_control = mpc8xxx_spi_cs_control; + pdata->cs_control = fsl_spi_cs_control; return 0; @@ -1223,7 +1023,7 @@ err_alloc_flags: return ret; } -static int of_mpc8xxx_spi_free_chipselects(struct device *dev) +static int of_fsl_spi_free_chipselects(struct device *dev) { struct fsl_spi_platform_data *pdata = dev->platform_data; struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); @@ -1242,50 +1042,21 @@ static int of_mpc8xxx_spi_free_chipselects(struct device *dev) return 0; } -static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, - const struct of_device_id *ofid) +static int __devinit of_fsl_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) { struct device *dev = &ofdev->dev; struct device_node *np = ofdev->dev.of_node; - struct mpc8xxx_spi_probe_info *pinfo; - struct fsl_spi_platform_data *pdata; struct spi_master *master; struct resource mem; struct resource irq; - const void *prop; int ret = -ENOMEM; - pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); - if (!pinfo) - return -ENOMEM; - - pdata = &pinfo->pdata; - dev->platform_data = pdata; - - /* Allocate bus num dynamically. */ - pdata->bus_num = -1; - - /* SPI controller is either clocked from QE or SoC clock. */ - pdata->sysclk = get_brgfreq(); - if (pdata->sysclk == -1) { - pdata->sysclk = fsl_get_sys_freq(); - if (pdata->sysclk == -1) { - ret = -ENODEV; - goto err_clk; - } - } + ret = of_mpc8xxx_spi_probe(ofdev, ofid); + if (ret) + return ret; - prop = of_get_property(np, "mode", NULL); - if (prop && !strcmp(prop, "cpu-qe")) - pdata->flags = SPI_QE_CPU_MODE; - else if (prop && !strcmp(prop, "qe")) - pdata->flags = SPI_CPM_MODE | SPI_QE; - else if (of_device_is_compatible(np, "fsl,cpm2-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM2; - else if (of_device_is_compatible(np, "fsl,cpm1-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM1; - - ret = of_mpc8xxx_spi_get_chipselects(dev); + ret = of_fsl_spi_get_chipselects(dev); if (ret) goto err; @@ -1299,7 +1070,7 @@ static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, goto err; } - master = mpc8xxx_spi_probe(dev, &mem, irq.start); + master = fsl_spi_probe(dev, &mem, irq.start); if (IS_ERR(master)) { ret = PTR_ERR(master); goto err; @@ -1308,42 +1079,40 @@ static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, return 0; err: - of_mpc8xxx_spi_free_chipselects(dev); -err_clk: - kfree(pinfo); + of_fsl_spi_free_chipselects(dev); return ret; } -static int __devexit of_mpc8xxx_spi_remove(struct platform_device *ofdev) +static int __devexit of_fsl_spi_remove(struct platform_device *ofdev) { int ret; ret = mpc8xxx_spi_remove(&ofdev->dev); if (ret) return ret; - of_mpc8xxx_spi_free_chipselects(&ofdev->dev); + of_fsl_spi_free_chipselects(&ofdev->dev); return 0; } -static const struct of_device_id of_mpc8xxx_spi_match[] = { +static const struct of_device_id of_fsl_spi_match[] = { { .compatible = "fsl,spi" }, - {}, + {} }; -MODULE_DEVICE_TABLE(of, of_mpc8xxx_spi_match); +MODULE_DEVICE_TABLE(of, of_fsl_spi_match); -static struct of_platform_driver of_mpc8xxx_spi_driver = { +static struct of_platform_driver of_fsl_spi_driver = { .driver = { - .name = "mpc8xxx_spi", + .name = "fsl_spi", .owner = THIS_MODULE, - .of_match_table = of_mpc8xxx_spi_match, + .of_match_table = of_fsl_spi_match, }, - .probe = of_mpc8xxx_spi_probe, - .remove = __devexit_p(of_mpc8xxx_spi_remove), + .probe = of_fsl_spi_probe, + .remove = __devexit_p(of_fsl_spi_remove), }; #ifdef CONFIG_MPC832x_RDB /* - * XXX XXX XXX + * XXX XXX XXX * This is "legacy" platform driver, was used by the MPC8323E-RDB boards * only. The driver should go away soon, since newer MPC8323E-RDB's device * tree can work with OpenFirmware driver. But for now we support old trees @@ -1366,7 +1135,7 @@ static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) if (irq <= 0) return -EINVAL; - master = mpc8xxx_spi_probe(&pdev->dev, mem, irq); + master = fsl_spi_probe(&pdev->dev, mem, irq); if (IS_ERR(master)) return PTR_ERR(master); return 0; @@ -1405,21 +1174,20 @@ static void __init legacy_driver_register(void) {} static void __exit legacy_driver_unregister(void) {} #endif /* CONFIG_MPC832x_RDB */ -static int __init mpc8xxx_spi_init(void) +static int __init fsl_spi_init(void) { legacy_driver_register(); - return of_register_platform_driver(&of_mpc8xxx_spi_driver); + return of_register_platform_driver(&of_fsl_spi_driver); } +module_init(fsl_spi_init); -static void __exit mpc8xxx_spi_exit(void) +static void __exit fsl_spi_exit(void) { - of_unregister_platform_driver(&of_mpc8xxx_spi_driver); + of_unregister_platform_driver(&of_fsl_spi_driver); legacy_driver_unregister(); } - -module_init(mpc8xxx_spi_init); -module_exit(mpc8xxx_spi_exit); +module_exit(fsl_spi_exit); MODULE_AUTHOR("Kumar Gala"); -MODULE_DESCRIPTION("Simple MPC8xxx SPI Driver"); +MODULE_DESCRIPTION("Simple Freescale SPI Driver"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 8b60d6c25b2a2d3525d5322de856c3ca408e5783 Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Tue, 12 Oct 2010 18:18:32 +0800 Subject: spi/fsl_spi: add eSPI controller support Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu Signed-off-by: Grant Likely diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 0e66194..9949c25 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -195,6 +195,15 @@ config SPI_FSL_SPI MPC83xx platform uses the controller in cpu mode or CPM/QE mode. MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. +config SPI_FSL_ESPI + tristate "Freescale eSPI controller" + depends on FSL_SOC + select SPI_FSL_LIB + help + This enables using the Freescale eSPI controllers in master mode. + From MPC8536, 85xx platform uses the controller, and all P10xx, + P20xx, P30xx,P40xx, P50xx uses this controller. + config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" depends on ARCH_OMAP1 diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 54bd95d..557aaad 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o +obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c new file mode 100644 index 0000000..e3b4f64 --- /dev/null +++ b/drivers/spi/spi_fsl_espi.c @@ -0,0 +1,748 @@ +/* + * Freescale eSPI controller driver. + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "spi_fsl_lib.h" + +/* eSPI Controller registers */ +struct fsl_espi_reg { + __be32 mode; /* 0x000 - eSPI mode register */ + __be32 event; /* 0x004 - eSPI event register */ + __be32 mask; /* 0x008 - eSPI mask register */ + __be32 command; /* 0x00c - eSPI command register */ + __be32 transmit; /* 0x010 - eSPI transmit FIFO access register*/ + __be32 receive; /* 0x014 - eSPI receive FIFO access register*/ + u8 res[8]; /* 0x018 - 0x01c reserved */ + __be32 csmode[4]; /* 0x020 - 0x02c eSPI cs mode register */ +}; + +struct fsl_espi_transfer { + const void *tx_buf; + void *rx_buf; + unsigned len; + unsigned n_tx; + unsigned n_rx; + unsigned actual_length; + int status; +}; + +/* eSPI Controller mode register definitions */ +#define SPMODE_ENABLE (1 << 31) +#define SPMODE_LOOP (1 << 30) +#define SPMODE_TXTHR(x) ((x) << 8) +#define SPMODE_RXTHR(x) ((x) << 0) + +/* eSPI Controller CS mode register definitions */ +#define CSMODE_CI_INACTIVEHIGH (1 << 31) +#define CSMODE_CP_BEGIN_EDGECLK (1 << 30) +#define CSMODE_REV (1 << 29) +#define CSMODE_DIV16 (1 << 28) +#define CSMODE_PM(x) ((x) << 24) +#define CSMODE_POL_1 (1 << 20) +#define CSMODE_LEN(x) ((x) << 16) +#define CSMODE_BEF(x) ((x) << 12) +#define CSMODE_AFT(x) ((x) << 8) +#define CSMODE_CG(x) ((x) << 3) + +/* Default mode/csmode for eSPI controller */ +#define SPMODE_INIT_VAL (SPMODE_TXTHR(4) | SPMODE_RXTHR(3)) +#define CSMODE_INIT_VAL (CSMODE_POL_1 | CSMODE_BEF(0) \ + | CSMODE_AFT(0) | CSMODE_CG(1)) + +/* SPIE register values */ +#define SPIE_NE 0x00000200 /* Not empty */ +#define SPIE_NF 0x00000100 /* Not full */ + +/* SPIM register values */ +#define SPIM_NE 0x00000200 /* Not empty */ +#define SPIM_NF 0x00000100 /* Not full */ +#define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F) +#define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F) + +/* SPCOM register values */ +#define SPCOM_CS(x) ((x) << 30) +#define SPCOM_TRANLEN(x) ((x) << 0) +#define SPCOM_TRANLEN_MAX 0xFFFF /* Max transaction length */ + +static void fsl_espi_change_mode(struct spi_device *spi) +{ + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct spi_mpc8xxx_cs *cs = spi->controller_state; + struct fsl_espi_reg *reg_base = mspi->reg_base; + __be32 __iomem *mode = ®_base->csmode[spi->chip_select]; + __be32 __iomem *espi_mode = ®_base->mode; + u32 tmp; + unsigned long flags; + + /* Turn off IRQs locally to minimize time that SPI is disabled. */ + local_irq_save(flags); + + /* Turn off SPI unit prior changing mode */ + tmp = mpc8xxx_spi_read_reg(espi_mode); + mpc8xxx_spi_write_reg(espi_mode, tmp & ~SPMODE_ENABLE); + mpc8xxx_spi_write_reg(mode, cs->hw_mode); + mpc8xxx_spi_write_reg(espi_mode, tmp); + + local_irq_restore(flags); +} + +static u32 fsl_espi_tx_buf_lsb(struct mpc8xxx_spi *mpc8xxx_spi) +{ + u32 data; + u16 data_h; + u16 data_l; + const u32 *tx = mpc8xxx_spi->tx; + + if (!tx) + return 0; + + data = *tx++ << mpc8xxx_spi->tx_shift; + data_l = data & 0xffff; + data_h = (data >> 16) & 0xffff; + swab16s(&data_l); + swab16s(&data_h); + data = data_h | data_l; + + mpc8xxx_spi->tx = tx; + return data; +} + +static int fsl_espi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + int bits_per_word = 0; + u8 pm; + u32 hz = 0; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* Make sure its a bit width we support [4..16] */ + if ((bits_per_word < 4) || (bits_per_word > 16)) + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + cs->rx_shift = 0; + cs->tx_shift = 0; + cs->get_rx = mpc8xxx_spi_rx_buf_u32; + cs->get_tx = mpc8xxx_spi_tx_buf_u32; + if (bits_per_word <= 8) { + cs->rx_shift = 8 - bits_per_word; + } else if (bits_per_word <= 16) { + cs->rx_shift = 16 - bits_per_word; + if (spi->mode & SPI_LSB_FIRST) + cs->get_tx = fsl_espi_tx_buf_lsb; + } else { + return -EINVAL; + } + + mpc8xxx_spi->rx_shift = cs->rx_shift; + mpc8xxx_spi->tx_shift = cs->tx_shift; + mpc8xxx_spi->get_rx = cs->get_rx; + mpc8xxx_spi->get_tx = cs->get_tx; + + bits_per_word = bits_per_word - 1; + + /* mask out bits we are going to set */ + cs->hw_mode &= ~(CSMODE_LEN(0xF) | CSMODE_DIV16 | CSMODE_PM(0xF)); + + cs->hw_mode |= CSMODE_LEN(bits_per_word); + + if ((mpc8xxx_spi->spibrg / hz) > 64) { + cs->hw_mode |= CSMODE_DIV16; + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; + + WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " + "Will use %d Hz instead.\n", dev_name(&spi->dev), + hz, mpc8xxx_spi->spibrg / 1024); + if (pm > 16) + pm = 16; + } else { + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + } + if (pm) + pm--; + + cs->hw_mode |= CSMODE_PM(pm); + + fsl_espi_change_mode(spi); + return 0; +} + +static int fsl_espi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, + unsigned int len) +{ + u32 word; + struct fsl_espi_reg *reg_base = mspi->reg_base; + + mspi->count = len; + + /* enable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); + + /* transmit word */ + word = mspi->get_tx(mspi); + mpc8xxx_spi_write_reg(®_base->transmit, word); + + return 0; +} + +static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base; + unsigned int len = t->len; + u8 bits_per_word; + int ret; + + bits_per_word = spi->bits_per_word; + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + mpc8xxx_spi->len = t->len; + len = roundup(len, 4) / 4; + + mpc8xxx_spi->tx = t->tx_buf; + mpc8xxx_spi->rx = t->rx_buf; + + INIT_COMPLETION(mpc8xxx_spi->done); + + /* Set SPCOM[CS] and SPCOM[TRANLEN] field */ + if ((t->len - 1) > SPCOM_TRANLEN_MAX) { + dev_err(mpc8xxx_spi->dev, "Transaction length (%d)" + " beyond the SPCOM[TRANLEN] field\n", t->len); + return -EINVAL; + } + mpc8xxx_spi_write_reg(®_base->command, + (SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1))); + + ret = fsl_espi_cpu_bufs(mpc8xxx_spi, t, len); + if (ret) + return ret; + + wait_for_completion(&mpc8xxx_spi->done); + + /* disable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, 0); + + return mpc8xxx_spi->count; +} + +static void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd) +{ + if (cmd[1] && cmd[2] && cmd[3]) { + cmd[1] = (u8)(addr >> 16); + cmd[2] = (u8)(addr >> 8); + cmd[3] = (u8)(addr >> 0); + } +} + +static unsigned int fsl_espi_cmd2addr(u8 *cmd) +{ + if (cmd[1] && cmd[2] && cmd[3]) + return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0; + + return 0; +} + +static void fsl_espi_do_trans(struct spi_message *m, + struct fsl_espi_transfer *tr) +{ + struct spi_device *spi = m->spi; + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct fsl_espi_transfer *espi_trans = tr; + struct spi_message message; + struct spi_transfer *t, *first, trans; + int status = 0; + + spi_message_init(&message); + memset(&trans, 0, sizeof(trans)); + + first = list_first_entry(&m->transfers, struct spi_transfer, + transfer_list); + list_for_each_entry(t, &m->transfers, transfer_list) { + if ((first->bits_per_word != t->bits_per_word) || + (first->speed_hz != t->speed_hz)) { + espi_trans->status = -EINVAL; + dev_err(mspi->dev, "bits_per_word/speed_hz should be" + " same for the same SPI transfer\n"); + return; + } + + trans.speed_hz = t->speed_hz; + trans.bits_per_word = t->bits_per_word; + trans.delay_usecs = max(first->delay_usecs, t->delay_usecs); + } + + trans.len = espi_trans->len; + trans.tx_buf = espi_trans->tx_buf; + trans.rx_buf = espi_trans->rx_buf; + spi_message_add_tail(&trans, &message); + + list_for_each_entry(t, &message.transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { + status = -EINVAL; + + status = fsl_espi_setup_transfer(spi, t); + if (status < 0) + break; + } + + if (t->len) + status = fsl_espi_bufs(spi, t); + + if (status) { + status = -EMSGSIZE; + break; + } + + if (t->delay_usecs) + udelay(t->delay_usecs); + } + + espi_trans->status = status; + fsl_espi_setup_transfer(spi, NULL); +} + +static void fsl_espi_cmd_trans(struct spi_message *m, + struct fsl_espi_transfer *trans, u8 *rx_buff) +{ + struct spi_transfer *t; + u8 *local_buf; + int i = 0; + struct fsl_espi_transfer *espi_trans = trans; + + local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); + if (!local_buf) { + espi_trans->status = -ENOMEM; + return; + } + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) { + memcpy(local_buf + i, t->tx_buf, t->len); + i += t->len; + } + } + + espi_trans->tx_buf = local_buf; + espi_trans->rx_buf = local_buf + espi_trans->n_tx; + fsl_espi_do_trans(m, espi_trans); + + espi_trans->actual_length = espi_trans->len; + kfree(local_buf); +} + +static void fsl_espi_rw_trans(struct spi_message *m, + struct fsl_espi_transfer *trans, u8 *rx_buff) +{ + struct fsl_espi_transfer *espi_trans = trans; + unsigned int n_tx = espi_trans->n_tx; + unsigned int n_rx = espi_trans->n_rx; + struct spi_transfer *t; + u8 *local_buf; + u8 *rx_buf = rx_buff; + unsigned int trans_len; + unsigned int addr; + int i, pos, loop; + + local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); + if (!local_buf) { + espi_trans->status = -ENOMEM; + return; + } + + for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) { + trans_len = n_rx - pos; + if (trans_len > SPCOM_TRANLEN_MAX - n_tx) + trans_len = SPCOM_TRANLEN_MAX - n_tx; + + i = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) { + memcpy(local_buf + i, t->tx_buf, t->len); + i += t->len; + } + } + + addr = fsl_espi_cmd2addr(local_buf); + addr += pos; + fsl_espi_addr2cmd(addr, local_buf); + + espi_trans->n_tx = n_tx; + espi_trans->n_rx = trans_len; + espi_trans->len = trans_len + n_tx; + espi_trans->tx_buf = local_buf; + espi_trans->rx_buf = local_buf + n_tx; + fsl_espi_do_trans(m, espi_trans); + + memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); + + if (loop > 0) + espi_trans->actual_length += espi_trans->len - n_tx; + else + espi_trans->actual_length += espi_trans->len; + } + + kfree(local_buf); +} + +static void fsl_espi_do_one_msg(struct spi_message *m) +{ + struct spi_transfer *t; + u8 *rx_buf = NULL; + unsigned int n_tx = 0; + unsigned int n_rx = 0; + struct fsl_espi_transfer espi_trans; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) + n_tx += t->len; + if (t->rx_buf) { + n_rx += t->len; + rx_buf = t->rx_buf; + } + } + + espi_trans.n_tx = n_tx; + espi_trans.n_rx = n_rx; + espi_trans.len = n_tx + n_rx; + espi_trans.actual_length = 0; + espi_trans.status = 0; + + if (!rx_buf) + fsl_espi_cmd_trans(m, &espi_trans, NULL); + else + fsl_espi_rw_trans(m, &espi_trans, rx_buf); + + m->actual_length = espi_trans.actual_length; + m->status = espi_trans.status; + m->complete(m->context); +} + +static int fsl_espi_setup(struct spi_device *spi) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + int retval; + u32 hw_mode; + u32 loop_mode; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (!spi->max_speed_hz) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + mpc8xxx_spi = spi_master_get_devdata(spi->master); + reg_base = mpc8xxx_spi->reg_base; + + hw_mode = cs->hw_mode; /* Save orginal settings */ + cs->hw_mode = mpc8xxx_spi_read_reg( + ®_base->csmode[spi->chip_select]); + /* mask out bits we are going to set */ + cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH + | CSMODE_REV); + + if (spi->mode & SPI_CPHA) + cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK; + if (spi->mode & SPI_CPOL) + cs->hw_mode |= CSMODE_CI_INACTIVEHIGH; + if (!(spi->mode & SPI_LSB_FIRST)) + cs->hw_mode |= CSMODE_REV; + + /* Handle the loop mode */ + loop_mode = mpc8xxx_spi_read_reg(®_base->mode); + loop_mode &= ~SPMODE_LOOP; + if (spi->mode & SPI_LOOP) + loop_mode |= SPMODE_LOOP; + mpc8xxx_spi_write_reg(®_base->mode, loop_mode); + + retval = fsl_espi_setup_transfer(spi, NULL); + if (retval < 0) { + cs->hw_mode = hw_mode; /* Restore settings */ + return retval; + } + return 0; +} + +void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +{ + struct fsl_espi_reg *reg_base = mspi->reg_base; + + /* We need handle RX first */ + if (events & SPIE_NE) { + u32 rx_data; + + /* Spin until RX is done */ + while (SPIE_RXCNT(events) < min(4, mspi->len)) { + cpu_relax(); + events = mpc8xxx_spi_read_reg(®_base->event); + } + mspi->len -= 4; + + rx_data = mpc8xxx_spi_read_reg(®_base->receive); + + if (mspi->rx) + mspi->get_rx(rx_data, mspi); + } + + if (!(events & SPIE_NF)) { + int ret; + + /* spin until TX is done */ + ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg( + ®_base->event)) & SPIE_NF) == 0, 1000, 0); + if (!ret) { + dev_err(mspi->dev, "tired waiting for SPIE_NF\n"); + return; + } + } + + /* Clear the events */ + mpc8xxx_spi_write_reg(®_base->event, events); + + mspi->count -= 1; + if (mspi->count) { + u32 word = mspi->get_tx(mspi); + + mpc8xxx_spi_write_reg(®_base->transmit, word); + } else { + complete(&mspi->done); + } +} + +static irqreturn_t fsl_espi_irq(s32 irq, void *context_data) +{ + struct mpc8xxx_spi *mspi = context_data; + struct fsl_espi_reg *reg_base = mspi->reg_base; + irqreturn_t ret = IRQ_NONE; + u32 events; + + /* Get interrupt events(tx/rx) */ + events = mpc8xxx_spi_read_reg(®_base->event); + if (events) + ret = IRQ_HANDLED; + + dev_vdbg(mspi->dev, "%s: events %x\n", __func__, events); + + fsl_espi_cpu_irq(mspi, events); + + return ret; +} + +static void fsl_espi_remove(struct mpc8xxx_spi *mspi) +{ + iounmap(mspi->reg_base); +} + +static struct spi_master * __devinit fsl_espi_probe(struct device *dev, + struct resource *mem, unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + u32 regval; + int i, ret = 0; + + master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); + if (!master) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(dev, master); + + ret = mpc8xxx_spi_probe(dev, mem, irq); + if (ret) + goto err_probe; + + master->setup = fsl_espi_setup; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg; + mpc8xxx_spi->spi_remove = fsl_espi_remove; + + mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); + if (!mpc8xxx_spi->reg_base) { + ret = -ENOMEM; + goto err_probe; + } + + reg_base = mpc8xxx_spi->reg_base; + + /* Register for SPI Interrupt */ + ret = request_irq(mpc8xxx_spi->irq, fsl_espi_irq, + 0, "fsl_espi", mpc8xxx_spi); + if (ret) + goto free_irq; + + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + mpc8xxx_spi->rx_shift = 16; + mpc8xxx_spi->tx_shift = 24; + } + + /* SPI controller initializations */ + mpc8xxx_spi_write_reg(®_base->mode, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); + mpc8xxx_spi_write_reg(®_base->command, 0); + mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); + + /* Init eSPI CS mode register */ + for (i = 0; i < pdata->max_chipselect; i++) + mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL); + + /* Enable SPI interface */ + regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; + + mpc8xxx_spi_write_reg(®_base->mode, regval); + + ret = spi_register_master(master); + if (ret < 0) + goto unreg_master; + + dev_info(dev, "at 0x%p (irq = %d)\n", reg_base, mpc8xxx_spi->irq); + + return master; + +unreg_master: + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); +free_irq: + iounmap(mpc8xxx_spi->reg_base); +err_probe: + spi_master_put(master); +err: + return ERR_PTR(ret); +} + +static int of_fsl_espi_get_chipselects(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct fsl_spi_platform_data *pdata = dev->platform_data; + const u32 *prop; + int len; + + prop = of_get_property(np, "fsl,espi-num-chipselects", &len); + if (!prop || len < sizeof(*prop)) { + dev_err(dev, "No 'fsl,espi-num-chipselects' property\n"); + return -EINVAL; + } + + pdata->max_chipselect = *prop; + pdata->cs_control = NULL; + + return 0; +} + +static int __devinit of_fsl_espi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct spi_master *master; + struct resource mem; + struct resource irq; + int ret = -ENOMEM; + + ret = of_mpc8xxx_spi_probe(ofdev, ofid); + if (ret) + return ret; + + ret = of_fsl_espi_get_chipselects(dev); + if (ret) + goto err; + + ret = of_address_to_resource(np, 0, &mem); + if (ret) + goto err; + + ret = of_irq_to_resource(np, 0, &irq); + if (!ret) { + ret = -EINVAL; + goto err; + } + + master = fsl_espi_probe(dev, &mem, irq.start); + if (IS_ERR(master)) { + ret = PTR_ERR(master); + goto err; + } + + return 0; + +err: + return ret; +} + +static int __devexit of_fsl_espi_remove(struct platform_device *dev) +{ + return mpc8xxx_spi_remove(&dev->dev); +} + +static const struct of_device_id of_fsl_espi_match[] = { + { .compatible = "fsl,mpc8536-espi" }, + {} +}; +MODULE_DEVICE_TABLE(of, of_fsl_espi_match); + +static struct of_platform_driver fsl_espi_driver = { + .driver = { + .name = "fsl_espi", + .owner = THIS_MODULE, + .of_match_table = of_fsl_espi_match, + }, + .probe = of_fsl_espi_probe, + .remove = __devexit_p(of_fsl_espi_remove), +}; + +static int __init fsl_espi_init(void) +{ + return of_register_platform_driver(&fsl_espi_driver); +} +module_init(fsl_espi_init); + +static void __exit fsl_espi_exit(void) +{ + of_unregister_platform_driver(&fsl_espi_driver); +} +module_exit(fsl_espi_exit); + +MODULE_AUTHOR("Mingkai Hu"); +MODULE_DESCRIPTION("Enhanced Freescale SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_fsl_lib.h b/drivers/spi/spi_fsl_lib.h index 6ae8949..15aa6c2 100644 --- a/drivers/spi/spi_fsl_lib.h +++ b/drivers/spi/spi_fsl_lib.h @@ -26,6 +26,9 @@ struct mpc8xxx_spi { /* rx & tx bufs from the spi_transfer */ const void *tx; void *rx; +#ifdef CONFIG_SPI_FSL_ESPI + int len; +#endif int subblock; struct spi_pram __iomem *pram; -- cgit v0.10.2 From f3016fa591c788d6d545ef7907e24c8b5d788759 Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Tue, 12 Oct 2010 18:18:33 +0800 Subject: powerpc/of: add eSPI controller dts bindings and DTS modification Also modifiy the document of cell-index in SPI controller. Add the SPI flash(s25fl128p01) support on p4080ds and mpc8536ds board. Signed-off-by: Mingkai Hu Signed-off-by: Grant Likely diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt index 80510c0..777abd7 100644 --- a/Documentation/powerpc/dts-bindings/fsl/spi.txt +++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt @@ -1,7 +1,9 @@ * SPI (Serial Peripheral Interface) Required properties: -- cell-index : SPI controller index. +- cell-index : QE SPI subblock index. + 0: QE subblock SPI1 + 1: QE subblock SPI2 - compatible : should be "fsl,spi". - mode : the SPI operation mode, it can be "cpu" or "cpu-qe". - reg : Offset and length of the register set for the device @@ -29,3 +31,23 @@ Example: gpios = <&gpio 18 1 // device reg=<0> &gpio 19 1>; // device reg=<1> }; + + +* eSPI (Enhanced Serial Peripheral Interface) + +Required properties: +- compatible : should be "fsl,mpc8536-espi". +- reg : Offset and length of the register set for the device. +- interrupts : should contain eSPI interrupt, the device has one interrupt. +- fsl,espi-num-chipselects : the number of the chipselect signals. + +Example: + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + }; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 815cebb..a75c10e 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -108,6 +108,58 @@ }; }; + spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + compatible = "spansion,s25sl12801"; + reg = <1>; + spi-max-frequency = <40000000>; + }; + flash@2 { + compatible = "spansion,s25sl12801"; + reg = <2>; + spi-max-frequency = <40000000>; + }; + flash@3 { + compatible = "spansion,s25sl12801"; + reg = <3>; + spi-max-frequency = <40000000>; + }; + }; + dma@21300 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index 2f0de24..5b7fc29 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -236,22 +236,19 @@ }; spi@110000 { - cell-index = <0>; #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,espi"; + compatible = "fsl,p4080-espi", "fsl,mpc8536-espi"; reg = <0x110000 0x1000>; interrupts = <53 0x2>; interrupt-parent = <&mpic>; - espi,num-ss-bits = <4>; - mode = "cpu"; + fsl,espi-num-chipselects = <4>; - fsl_m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; spi-max-frequency = <40000000>; /* input clock */ partition@u-boot { label = "u-boot"; -- cgit v0.10.2 From 8e41b527ff2c1d7d8c9a9e8b9f53877af2892cef Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 13 Oct 2010 23:03:15 -0600 Subject: spi/topcliff: Fix uninitialized variable defect This patch fixes the following build error introduced by commit 65308c46, "spi/topcliff: cleanup for style and conciseness". drivers/spi/spi_topcliff_pch.c: In function 'pch_spi_process_messages': drivers/spi/spi_topcliff_pch.c:752: warning: 'data' is used uninitialized in +this function Signed-off-by: Grant Likely diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c index 9774623..58e187f 100644 --- a/drivers/spi/spi_topcliff_pch.c +++ b/drivers/spi/spi_topcliff_pch.c @@ -749,8 +749,8 @@ static void pch_spi_process_messages(struct work_struct *pwork) struct pch_spi_data *data; int bpw; - dev_dbg(&data->master->dev, "%s data initialized\n", __func__); data = container_of(pwork, struct pch_spi_data, work); + dev_dbg(&data->master->dev, "%s data initialized\n", __func__); spin_lock(&data->lock); -- cgit v0.10.2 From b9d228f9e896df1af787b2f3467889ab0832370a Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Wed, 13 Oct 2010 17:51:02 +0200 Subject: spi/atmel: let transfers through if not changing bits_per_word bits_per_word option in spi_transfer are allowed if it does not change the csr register. This is necessary for the driver in drivers/staging/iio/adis16260_core.c, as it uses this option. Signed-off-by: Matthias Brugger Signed-off-by: Grant Likely diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index c4e0442..5c03a5b 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -654,6 +654,8 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) struct spi_transfer *xfer; unsigned long flags; struct device *controller = spi->master->dev.parent; + u8 bits; + struct atmel_spi_device *asd; as = spi_master_get_devdata(spi->master); @@ -672,8 +674,18 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) return -EINVAL; } + if (xfer->bits_per_word) { + asd = spi->controller_state; + bits = (asd->csr >> 4) & 0xf; + if (bits != xfer->bits_per_word - 8) { + dev_dbg(&spi->dev, "you can't yet change " + "bit_per_word in transfers\n"); + return -ENOPROTOOPT; + } + } + /* FIXME implement these protocol options!! */ - if (xfer->bits_per_word || xfer->speed_hz) { + if (xfer->speed_hz) { dev_dbg(&spi->dev, "no protocol options yet\n"); return -ENOPROTOOPT; } -- cgit v0.10.2 From ef6510babf047d394aa6eb8c93baa0dd6b838c28 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 14 Oct 2010 08:55:47 -0500 Subject: spi/fsl_spi: Fix compile errors when building on ppc64 We get the following when building on ppc64 due to lack of include of : In file included from drivers/spi/spi_fsl_espi.c:25:0: drivers/spi/spi_fsl_lib.h: In function 'mpc8xxx_spi_write_reg': drivers/spi/spi_fsl_lib.h:88:2: error: implicit declaration of function 'out_be32' drivers/spi/spi_fsl_lib.h: In function 'mpc8xxx_spi_read_reg': drivers/spi/spi_fsl_lib.h:93:2: error: implicit declaration of function 'in_be32' drivers/spi/spi_fsl_espi.c: In function 'fsl_espi_remove': drivers/spi/spi_fsl_espi.c:571:2: error: implicit declaration of function 'iounmap' drivers/spi/spi_fsl_espi.c: In function 'fsl_espi_probe': drivers/spi/spi_fsl_espi.c:602:2: error: implicit declaration of function 'ioremap' drivers/spi/spi_fsl_espi.c:602:24: warning: assignment makes pointer from integer without a cast Signed-off-by: Kumar Gala Signed-off-by: Grant Likely diff --git a/drivers/spi/spi_fsl_lib.h b/drivers/spi/spi_fsl_lib.h index 15aa6c2..281e060 100644 --- a/drivers/spi/spi_fsl_lib.h +++ b/drivers/spi/spi_fsl_lib.h @@ -18,6 +18,8 @@ #ifndef __SPI_FSL_LIB_H__ #define __SPI_FSL_LIB_H__ +#include + /* SPI/eSPI Controller driver's private data. */ struct mpc8xxx_spi { struct device *dev; -- cgit v0.10.2 From ee2007d299ad4020115b193858817e6c57e95db5 Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Sat, 16 Oct 2010 01:39:49 +0200 Subject: spi/atmel: typo in debug message This patches a typo in the debug message. Signed-off-by: Matthias Brugger Signed-off-by: Grant Likely diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 5c03a5b..154529a 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -679,7 +679,7 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) bits = (asd->csr >> 4) & 0xf; if (bits != xfer->bits_per_word - 8) { dev_dbg(&spi->dev, "you can't yet change " - "bit_per_word in transfers\n"); + "bits_per_word in transfers\n"); return -ENOPROTOOPT; } } -- cgit v0.10.2 From ac01e97d644da8e947ffa1bde5083290fe2e36e7 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 Mar 2009 00:18:35 +0000 Subject: spi/bfin_spi: fix resources leakage Re-order setup() a bit so we don't leak memory/dma/gpio resources upon errors. Also make sure we don't call kfree() twice on the same object. Signed-off-by: Daniel Mack Signed-off-by: Bryan Wu Signed-off-by: Yi Li Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 10a6dc3..4f20b92 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1006,20 +1006,24 @@ static u16 ssel[][MAX_SPI_SSEL] = { /* first setup for new devices */ static int bfin_spi_setup(struct spi_device *spi) { - struct bfin5xx_spi_chip *chip_info = NULL; - struct chip_data *chip; + struct bfin5xx_spi_chip *chip_info; + struct chip_data *chip = NULL; struct driver_data *drv_data = spi_master_get_devdata(spi->master); - int ret; + int ret = -EINVAL; if (spi->bits_per_word != 8 && spi->bits_per_word != 16) - return -EINVAL; + goto error; /* Only alloc (or use chip_info) on first setup */ + chip_info = NULL; chip = spi_get_ctldata(spi); if (chip == NULL) { - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) - return -ENOMEM; + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) { + dev_err(&spi->dev, "cannot allocate chip data\n"); + ret = -ENOMEM; + goto error; + } chip->enable_dma = 0; chip_info = spi->controller_data; @@ -1036,7 +1040,7 @@ static int bfin_spi_setup(struct spi_device *spi) if (chip_info->ctl_reg & (SPE|MSTR|CPOL|CPHA|LSBF|SIZE)) { dev_err(&spi->dev, "do not set bits in ctl_reg " "that the SPI framework manages\n"); - return -EINVAL; + goto error; } chip->enable_dma = chip_info->enable_dma != 0 @@ -1060,26 +1064,6 @@ static int bfin_spi_setup(struct spi_device *spi) chip->ctl_reg |= MSTR; /* - * if any one SPI chip is registered and wants DMA, request the - * DMA channel for it - */ - if (chip->enable_dma && !drv_data->dma_requested) { - /* register dma irq handler */ - if (request_dma(drv_data->dma_channel, "BFIN_SPI_DMA") < 0) { - dev_dbg(&spi->dev, - "Unable to request BlackFin SPI DMA channel\n"); - return -ENODEV; - } - if (set_dma_callback(drv_data->dma_channel, - bfin_spi_dma_irq_handler, drv_data) < 0) { - dev_dbg(&spi->dev, "Unable to set dma callback\n"); - return -EPERM; - } - dma_disable_irq(drv_data->dma_channel); - drv_data->dma_requested = 1; - } - - /* * Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ @@ -1087,16 +1071,6 @@ static int bfin_spi_setup(struct spi_device *spi) chip->flag = 1 << (spi->chip_select); chip->chip_select_num = spi->chip_select; - if (chip->chip_select_num == 0) { - ret = gpio_request(chip->cs_gpio, spi->modalias); - if (ret) { - if (drv_data->dma_requested) - free_dma(drv_data->dma_channel); - return ret; - } - gpio_direction_output(chip->cs_gpio, 1); - } - switch (chip->bits_per_word) { case 8: chip->n_bytes = 1; @@ -1123,9 +1097,39 @@ static int bfin_spi_setup(struct spi_device *spi) default: dev_err(&spi->dev, "%d bits_per_word is not supported\n", chip->bits_per_word); - if (chip_info) - kfree(chip); - return -ENODEV; + goto error; + } + + /* + * if any one SPI chip is registered and wants DMA, request the + * DMA channel for it + */ + if (chip->enable_dma && !drv_data->dma_requested) { + /* register dma irq handler */ + ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA"); + if (ret) { + dev_err(&spi->dev, + "Unable to request BlackFin SPI DMA channel\n"); + goto error; + } + drv_data->dma_requested = 1; + + ret = set_dma_callback(drv_data->dma_channel, + bfin_spi_dma_irq_handler, drv_data); + if (ret) { + dev_err(&spi->dev, "Unable to set dma callback\n"); + goto error; + } + dma_disable_irq(drv_data->dma_channel); + } + + if (chip->chip_select_num == 0) { + ret = gpio_request(chip->cs_gpio, spi->modalias); + if (ret) { + dev_err(&spi->dev, "gpio_request() error\n"); + goto pin_error; + } + gpio_direction_output(chip->cs_gpio, 1); } dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n", @@ -1136,14 +1140,38 @@ static int bfin_spi_setup(struct spi_device *spi) spi_set_ctldata(spi, chip); dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num); - if ((chip->chip_select_num > 0) - && (chip->chip_select_num <= spi->master->num_chipselect)) - peripheral_request(ssel[spi->master->bus_num] - [chip->chip_select_num-1], spi->modalias); + if (chip->chip_select_num > 0 && + chip->chip_select_num <= spi->master->num_chipselect) { + ret = peripheral_request(ssel[spi->master->bus_num] + [chip->chip_select_num-1], spi->modalias); + if (ret) { + dev_err(&spi->dev, "peripheral_request() error\n"); + goto pin_error; + } + } bfin_spi_cs_deactive(drv_data, chip); return 0; + + pin_error: + if (chip->chip_select_num == 0) + gpio_free(chip->cs_gpio); + else + peripheral_free(ssel[spi->master->bus_num] + [chip->chip_select_num - 1]); + error: + if (chip) { + if (drv_data->dma_requested) + free_dma(drv_data->dma_channel); + drv_data->dma_requested = 0; + + kfree(chip); + /* prevent free 'chip' twice */ + spi_set_ctldata(spi, NULL); + } + + return ret; } /* @@ -1166,6 +1194,8 @@ static void bfin_spi_cleanup(struct spi_device *spi) gpio_free(chip->cs_gpio); kfree(chip); + /* prevent free 'chip' twice */ + spi_set_ctldata(spi, NULL); } static inline int bfin_spi_init_queue(struct driver_data *drv_data) -- cgit v0.10.2 From 60d0071b609ecb0aebe12aaedf34fe552da12c5b Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 18 May 2009 10:01:16 +0000 Subject: spi/bfin_spi: work around anomaly 05000119 Anomaly 05000119 states that the DMA_RUN bit with peripherals isn't reliable. However, the way the driver is currently written (DMA IRQ callback), we don't need the polling in the first place, so drop it. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 4f20b92..61c2ebf 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -540,10 +540,6 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) clear_dma_irqstat(drv_data->dma_channel); - /* Wait for DMA to complete */ - while (get_dma_curr_irqstat(drv_data->dma_channel) & DMA_RUN) - cpu_relax(); - /* * wait for the last transaction shifted out. HRM states: * at this point there may still be data in the SPI DMA FIFO waiting -- cgit v0.10.2 From bb8beecd98de45f821a3360e0b061fc1f8da947c Mon Sep 17 00:00:00 2001 From: Wolfgang Muees Date: Fri, 22 May 2009 01:11:02 +0000 Subject: spi/bfin_spi: force sane master-mode state at boot We should make sure the SPI controller is in a sane state in case the boot loader left it in a crappy state. Such as DMA pending which causes interrupts to fire on us. When setting a sane initial state, do not default to slave mode. If we do, then the SPI peripheral may implicitly take over the SPISS pin which other things might be using. For example, the BF533-STAMP uses this pin as a GPIO to control switching between ethernet and flash. If the SPI peripheral controls the output state instead, the ethernet is no longer accessible. URL: http://blackfin.uclinux.org/gf/tracker/5630 Signed-off-by: Wolfgang Muees Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 61c2ebf..b835254 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1354,6 +1354,12 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_queue_alloc; } + /* Reset SPI registers. If these registers were used by the boot loader, + * the sky may fall on your head if you enable the dma controller. + */ + write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); + write_FLAG(drv_data, 0xFF00); + /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); status = spi_register_master(master); -- cgit v0.10.2 From f6a6d96685be6e784849d067b44acb831f595417 Mon Sep 17 00:00:00 2001 From: Yi Li Date: Wed, 3 Jun 2009 09:46:22 +0000 Subject: spi/bfin_spi: utilize the SPI interrupt in PIO mode The current behavior in PIO mode is to poll the SPI status registers which can obviously lead to higher latencies when doing a lot of SPI traffic. There is a SPI interrupt which can be used instead to signal individual completion of transactions. Signed-off-by: Yi Li Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index b835254..3736c35 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -92,6 +92,9 @@ struct driver_data { dma_addr_t rx_dma; dma_addr_t tx_dma; + int irq_requested; + int spi_irq; + size_t rx_map_len; size_t tx_map_len; u8 n_bytes; @@ -115,6 +118,7 @@ struct chip_data { u16 cs_chg_udelay; /* Some devices require > 255usec delay */ u32 cs_gpio; u16 idle_tx_val; + u8 pio_interrupt; /* use spi data irq */ void (*write) (struct driver_data *); void (*read) (struct driver_data *); void (*duplex) (struct driver_data *); @@ -525,6 +529,79 @@ static void bfin_spi_giveback(struct driver_data *drv_data) msg->complete(msg->context); } +/* spi data irq handler */ +static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) +{ + struct driver_data *drv_data = dev_id; + struct chip_data *chip = drv_data->cur_chip; + struct spi_message *msg = drv_data->cur_msg; + int n_bytes = drv_data->n_bytes; + + /* wait until transfer finished. */ + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + + if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) || + (drv_data->rx && drv_data->rx >= (drv_data->rx_end - n_bytes))) { + /* last read */ + if (drv_data->rx) { + dev_dbg(&drv_data->pdev->dev, "last read\n"); + if (n_bytes == 2) + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + else if (n_bytes == 1) + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + drv_data->rx += n_bytes; + } + + msg->actual_length += drv_data->len_in_bytes; + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); + /* Move to next transfer */ + msg->state = bfin_spi_next_transfer(drv_data); + + disable_irq(drv_data->spi_irq); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + return IRQ_HANDLED; + } + + if (drv_data->rx && drv_data->tx) { + /* duplex */ + dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); + if (drv_data->n_bytes == 2) { + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + } else if (drv_data->n_bytes == 1) { + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + } + } else if (drv_data->rx) { + /* read */ + dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); + if (drv_data->n_bytes == 2) + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + else if (drv_data->n_bytes == 1) + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, chip->idle_tx_val); + } else if (drv_data->tx) { + /* write */ + dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); + bfin_spi_dummy_read(drv_data); + if (drv_data->n_bytes == 2) + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + else if (drv_data->n_bytes == 1) + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + } + + if (drv_data->tx) + drv_data->tx += n_bytes; + if (drv_data->rx) + drv_data->rx += n_bytes; + + return IRQ_HANDLED; +} + static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) { struct driver_data *drv_data = dev_id; @@ -700,6 +777,7 @@ static void bfin_spi_pump_transfers(unsigned long data) default: /* No change, the same as default setting */ + transfer->bits_per_word = chip->bits_per_word; drv_data->n_bytes = chip->n_bytes; width = chip->width; drv_data->write = drv_data->tx ? chip->write : bfin_spi_null_writer; @@ -842,60 +920,86 @@ static void bfin_spi_pump_transfers(unsigned long data) dma_enable_irq(drv_data->dma_channel); local_irq_restore(flags); - } else { - /* IO mode write then read */ - dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); + return; + } - /* we always use SPI_WRITE mode. SPI_READ mode - seems to have problems with setting up the - output value in TDBR prior to the transfer. */ + if (chip->pio_interrupt) { + /* use write mode. spi irq should have been disabled */ + cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); write_CTRL(drv_data, (cr | CFG_SPI_WRITE)); - if (full_duplex) { - /* full duplex mode */ - BUG_ON((drv_data->tx_end - drv_data->tx) != - (drv_data->rx_end - drv_data->rx)); - dev_dbg(&drv_data->pdev->dev, - "IO duplex: cr is 0x%x\n", cr); - - drv_data->duplex(drv_data); - - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->tx != NULL) { - /* write only half duplex */ - dev_dbg(&drv_data->pdev->dev, - "IO write: cr is 0x%x\n", cr); + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); - drv_data->write(drv_data); + /* start transfer */ + if (drv_data->tx == NULL) + write_TDBR(drv_data, chip->idle_tx_val); + else { + if (transfer->bits_per_word == 8) + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + else if (transfer->bits_per_word == 16) + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + drv_data->tx += drv_data->n_bytes; + } - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->rx != NULL) { - /* read only half duplex */ - dev_dbg(&drv_data->pdev->dev, - "IO read: cr is 0x%x\n", cr); + /* once TDBR is empty, interrupt is triggered */ + enable_irq(drv_data->spi_irq); + return; + } - drv_data->read(drv_data); - if (drv_data->rx != drv_data->rx_end) - tranf_success = 0; - } + /* IO mode */ + dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); + + /* we always use SPI_WRITE mode. SPI_READ mode + seems to have problems with setting up the + output value in TDBR prior to the transfer. */ + write_CTRL(drv_data, (cr | CFG_SPI_WRITE)); + + if (full_duplex) { + /* full duplex mode */ + BUG_ON((drv_data->tx_end - drv_data->tx) != + (drv_data->rx_end - drv_data->rx)); + dev_dbg(&drv_data->pdev->dev, + "IO duplex: cr is 0x%x\n", cr); + + drv_data->duplex(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->tx != NULL) { + /* write only half duplex */ + dev_dbg(&drv_data->pdev->dev, + "IO write: cr is 0x%x\n", cr); + + drv_data->write(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->rx != NULL) { + /* read only half duplex */ + dev_dbg(&drv_data->pdev->dev, + "IO read: cr is 0x%x\n", cr); + + drv_data->read(drv_data); + if (drv_data->rx != drv_data->rx_end) + tranf_success = 0; + } - if (!tranf_success) { - dev_dbg(&drv_data->pdev->dev, - "IO write error!\n"); - message->state = ERROR_STATE; - } else { - /* Update total byte transfered */ - message->actual_length += drv_data->len_in_bytes; - /* Move to next transfer of this msg */ - message->state = bfin_spi_next_transfer(drv_data); - if (drv_data->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - } - /* Schedule next transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); + if (!tranf_success) { + dev_dbg(&drv_data->pdev->dev, + "IO write error!\n"); + message->state = ERROR_STATE; + } else { + /* Update total byte transfered */ + message->actual_length += drv_data->len_in_bytes; + /* Move to next transfer of this msg */ + message->state = bfin_spi_next_transfer(drv_data); + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); } + + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); } /* pop a msg from queue and kick off real transfer */ @@ -1047,6 +1151,7 @@ static int bfin_spi_setup(struct spi_device *spi) chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->cs_gpio = chip_info->cs_gpio; chip->idle_tx_val = chip_info->idle_tx_val; + chip->pio_interrupt = chip_info->pio_interrupt; } /* translate common spi framework into our register */ @@ -1096,6 +1201,11 @@ static int bfin_spi_setup(struct spi_device *spi) goto error; } + if (chip->enable_dma && chip->pio_interrupt) { + dev_err(&spi->dev, "enable_dma is set, " + "do not set pio_interrupt\n"); + goto error; + } /* * if any one SPI chip is registered and wants DMA, request the * DMA channel for it @@ -1119,6 +1229,18 @@ static int bfin_spi_setup(struct spi_device *spi) dma_disable_irq(drv_data->dma_channel); } + if (chip->pio_interrupt && !drv_data->irq_requested) { + ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler, + IRQF_DISABLED, "BFIN_SPI", drv_data); + if (ret) { + dev_err(&spi->dev, "Unable to register spi IRQ\n"); + goto error; + } + drv_data->irq_requested = 1; + /* we use write mode, spi irq has to be disabled here */ + disable_irq(drv_data->spi_irq); + } + if (chip->chip_select_num == 0) { ret = gpio_request(chip->cs_gpio, spi->modalias); if (ret) { @@ -1328,11 +1450,19 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_ioremap; } - drv_data->dma_channel = platform_get_irq(pdev, 0); - if (drv_data->dma_channel < 0) { + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { dev_err(dev, "No DMA channel specified\n"); status = -ENOENT; - goto out_error_no_dma_ch; + goto out_error_free_io; + } + drv_data->dma_channel = res->start; + + drv_data->spi_irq = platform_get_irq(pdev, 0); + if (drv_data->spi_irq < 0) { + dev_err(dev, "No spi pio irq specified\n"); + status = -ENOENT; + goto out_error_free_io; } /* Initial and start queue */ @@ -1375,7 +1505,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev) out_error_queue_alloc: bfin_spi_destroy_queue(drv_data); -out_error_no_dma_ch: +out_error_free_io: iounmap((void *) drv_data->regs_base); out_error_ioremap: out_error_get_res: @@ -1407,6 +1537,11 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) free_dma(drv_data->dma_channel); } + if (drv_data->irq_requested) { + free_irq(drv_data->spi_irq, drv_data); + drv_data->irq_requested = 0; + } + /* Disconnect from the SPI framework */ spi_unregister_master(drv_data->master); -- cgit v0.10.2 From 8221610e9990e7ee542a4e508d278302af8a9e75 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 17 Jun 2009 10:10:53 +0000 Subject: spi/bfin_spi: fix CS handling The CS helper functions were toggling both the Flag Enable and the Flag Value bits, but the Flag Value bit is ignored if the corresponding Flag Enable bit is cleared. So under high speed transactions, the CS sometimes would not toggle properly. Since it makes no sense to toggle the Flag Enable bit dynamically when we actually want to control the Flag Value, do this when setting up the device and then only handle toggling of the CS value during runtime. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 3736c35..6150a8c 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -188,8 +188,7 @@ static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *c if (likely(chip->chip_select_num)) { u16 flag = read_FLAG(drv_data); - flag |= chip->flag; - flag &= ~(chip->flag << 8); + flag &= ~chip->flag; write_FLAG(drv_data, flag); } else { @@ -202,8 +201,7 @@ static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data if (likely(chip->chip_select_num)) { u16 flag = read_FLAG(drv_data); - flag &= ~chip->flag; - flag |= (chip->flag << 8); + flag |= chip->flag; write_FLAG(drv_data, flag); } else { @@ -215,6 +213,25 @@ static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data udelay(chip->cs_chg_udelay); } +/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ +static inline void bfin_spi_cs_enable(struct driver_data *drv_data, struct chip_data *chip) +{ + u16 flag = read_FLAG(drv_data); + + flag |= (chip->flag >> 8); + + write_FLAG(drv_data, flag); +} + +static inline void bfin_spi_cs_disable(struct driver_data *drv_data, struct chip_data *chip) +{ + u16 flag = read_FLAG(drv_data); + + flag &= ~(chip->flag >> 8); + + write_FLAG(drv_data, flag); +} + /* stop controller and re-config current chip*/ static void bfin_spi_restore_state(struct driver_data *drv_data) { @@ -1169,7 +1186,7 @@ static int bfin_spi_setup(struct spi_device *spi) * SPI_BAUD, not the real baudrate */ chip->baud = hz_to_spi_baud(spi->max_speed_hz); - chip->flag = 1 << (spi->chip_select); + chip->flag = (1 << (spi->chip_select)) << 8; chip->chip_select_num = spi->chip_select; switch (chip->bits_per_word) { @@ -1268,6 +1285,7 @@ static int bfin_spi_setup(struct spi_device *spi) } } + bfin_spi_cs_enable(drv_data, chip); bfin_spi_cs_deactive(drv_data, chip); return 0; @@ -1299,14 +1317,17 @@ static int bfin_spi_setup(struct spi_device *spi) static void bfin_spi_cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata(spi); + struct driver_data *drv_data = spi_master_get_devdata(spi->master); if (!chip) return; if ((chip->chip_select_num > 0) - && (chip->chip_select_num <= spi->master->num_chipselect)) + && (chip->chip_select_num <= spi->master->num_chipselect)) { peripheral_free(ssel[spi->master->bus_num] [chip->chip_select_num-1]); + bfin_spi_cs_disable(drv_data, chip); + } if (chip->chip_select_num == 0) gpio_free(chip->cs_gpio); -- cgit v0.10.2 From 201bbc6fd84c67b4021f454d3e4c30d5cd77f702 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 23 Sep 2009 20:56:10 +0000 Subject: spi/bfin_spi: drop custom cs_change_per_word support As David points out, the cs_change_per_word option isn't standard, nor is anyone actually using it. So punt all of the dead code considering it makes up ~10% of the code size. Reported-by: David Brownell Signed-off-by: Mike Frysinger diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index ed4f8c6..ee3ecb9 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -120,7 +120,6 @@ struct bfin5xx_spi_chip { u16 ctl_reg; u8 enable_dma; u8 bits_per_word; - u8 cs_change_per_word; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ u32 cs_gpio; /* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */ diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 6150a8c..f4023a7 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -114,7 +114,6 @@ struct chip_data { u8 width; /* 0 or 1 */ u8 enable_dma; u8 bits_per_word; /* 8 or 16 */ - u8 cs_change_per_word; u16 cs_chg_udelay; /* Some devices require > 255usec delay */ u32 cs_gpio; u16 idle_tx_val; @@ -309,24 +308,6 @@ static void bfin_spi_u8_writer(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_writer(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - /* make sure transfer finished before deactiving CS */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - static void bfin_spi_u8_reader(struct driver_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -342,24 +323,6 @@ static void bfin_spi_u8_reader(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_reader(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - u16 tx_val = chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - static void bfin_spi_u8_duplex(struct driver_data *drv_data) { /* discard old RX data and clear RXS */ @@ -373,23 +336,6 @@ static void bfin_spi_u8_duplex(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_duplex(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - static void bfin_spi_u16_writer(struct driver_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ @@ -407,25 +353,6 @@ static void bfin_spi_u16_writer(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_writer(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); - drv_data->tx += 2; - /* make sure transfer finished before deactiving CS */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - static void bfin_spi_u16_reader(struct driver_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -442,25 +369,6 @@ static void bfin_spi_u16_reader(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_reader(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - u16 tx_val = chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); - drv_data->rx += 2; - bfin_spi_cs_deactive(drv_data, chip); - } -} - static void bfin_spi_u16_duplex(struct driver_data *drv_data) { /* discard old RX data and clear RXS */ @@ -476,25 +384,6 @@ static void bfin_spi_u16_duplex(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_duplex(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); - drv_data->tx += 2; - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); - drv_data->rx += 2; - bfin_spi_cs_deactive(drv_data, chip); - } -} - /* test if ther is more transfer to be done */ static void *bfin_spi_next_transfer(struct driver_data *drv_data) { @@ -773,23 +662,17 @@ static void bfin_spi_pump_transfers(unsigned long data) case 8: drv_data->n_bytes = 1; width = CFG_SPI_WORDSIZE8; - drv_data->read = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_reader : bfin_spi_u8_reader; - drv_data->write = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_writer : bfin_spi_u8_writer; - drv_data->duplex = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_duplex : bfin_spi_u8_duplex; + drv_data->read = bfin_spi_u8_reader; + drv_data->write = bfin_spi_u8_writer; + drv_data->duplex = bfin_spi_u8_duplex; break; case 16: drv_data->n_bytes = 2; width = CFG_SPI_WORDSIZE16; - drv_data->read = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_reader : bfin_spi_u16_reader; - drv_data->write = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_writer : bfin_spi_u16_writer; - drv_data->duplex = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_duplex : bfin_spi_u16_duplex; + drv_data->read = bfin_spi_u16_reader; + drv_data->write = bfin_spi_u16_writer; + drv_data->duplex = bfin_spi_u16_duplex; break; default: @@ -1164,7 +1047,6 @@ static int bfin_spi_setup(struct spi_device *spi) && drv_data->master_info->enable_dma; chip->ctl_reg = chip_info->ctl_reg; chip->bits_per_word = chip_info->bits_per_word; - chip->cs_change_per_word = chip_info->cs_change_per_word; chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->cs_gpio = chip_info->cs_gpio; chip->idle_tx_val = chip_info->idle_tx_val; @@ -1193,23 +1075,17 @@ static int bfin_spi_setup(struct spi_device *spi) case 8: chip->n_bytes = 1; chip->width = CFG_SPI_WORDSIZE8; - chip->read = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_reader : bfin_spi_u8_reader; - chip->write = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_writer : bfin_spi_u8_writer; - chip->duplex = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_duplex : bfin_spi_u8_duplex; + chip->read = bfin_spi_u8_reader; + chip->write = bfin_spi_u8_writer; + chip->duplex = bfin_spi_u8_duplex; break; case 16: chip->n_bytes = 2; chip->width = CFG_SPI_WORDSIZE16; - chip->read = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_reader : bfin_spi_u16_reader; - chip->write = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_writer : bfin_spi_u16_writer; - chip->duplex = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_duplex : bfin_spi_u16_duplex; + chip->read = bfin_spi_u16_reader; + chip->write = bfin_spi_u16_writer; + chip->duplex = bfin_spi_u16_duplex; break; default: -- cgit v0.10.2 From 5cc0159a5779f297d1b987d5f6d0feb6dc36a27a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 23 Sep 2009 23:24:59 +0000 Subject: spi/bfin_spi: punt useless null read/write funcs The chip ops should always be initialized, so having null fallback functions are useless. Reported-by: David Brownell Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index f4023a7..5e07f49 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -255,43 +255,6 @@ static inline void bfin_spi_dummy_read(struct driver_data *drv_data) (void) read_RDBR(drv_data); } -static void bfin_spi_null_writer(struct driver_data *drv_data) -{ - u8 n_bytes = drv_data->n_bytes; - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - write_TDBR(drv_data, tx_val); - drv_data->tx += n_bytes; - /* wait until transfer finished. - checking SPIF or TXS may not guarantee transfer completion */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - /* discard RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - } -} - -static void bfin_spi_null_reader(struct driver_data *drv_data) -{ - u8 n_bytes = drv_data->n_bytes; - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, tx_val); - drv_data->rx += n_bytes; - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - } -} - static void bfin_spi_u8_writer(struct driver_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ @@ -680,9 +643,9 @@ static void bfin_spi_pump_transfers(unsigned long data) transfer->bits_per_word = chip->bits_per_word; drv_data->n_bytes = chip->n_bytes; width = chip->width; - drv_data->write = drv_data->tx ? chip->write : bfin_spi_null_writer; - drv_data->read = drv_data->rx ? chip->read : bfin_spi_null_reader; - drv_data->duplex = chip->duplex ? chip->duplex : bfin_spi_null_writer; + drv_data->write = chip->write; + drv_data->read = chip->read; + drv_data->duplex = chip->duplex; break; } cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); @@ -695,8 +658,8 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->len = transfer->len; } dev_dbg(&drv_data->pdev->dev, - "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n", - drv_data->write, chip->write, bfin_spi_null_writer); + "transfer: drv_data->write is %p, chip->write is %p\n", + drv_data->write, chip->write); /* speed and width has been set on per message */ message->state = RUNNING_STATE; -- cgit v0.10.2 From ab09e0406ffd42d26fc9a6dcbb626f9eb1da9160 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 23 Sep 2009 23:32:34 +0000 Subject: spi/bfin_spi: fix up some unused/misleading comments Reported-by: David Brownell Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 5e07f49..045c82a 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -44,9 +44,6 @@ MODULE_LICENSE("GPL"); #define QUEUE_RUNNING 0 #define QUEUE_STOPPED 1 -/* Value to send if no TX value is supplied */ -#define SPI_IDLE_TXVAL 0x0000 - struct driver_data { /* Driver model hookup */ struct platform_device *pdev; @@ -581,7 +578,7 @@ static void bfin_spi_pump_transfers(unsigned long data) udelay(previous->delay_usecs); } - /* Setup the transfer state based on the type of transfer */ + /* Flush any existing transfers that may be sitting in the hardware */ if (bfin_spi_flush(drv_data) == 0) { dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); message->status = -EIO; @@ -661,7 +658,6 @@ static void bfin_spi_pump_transfers(unsigned long data) "transfer: drv_data->write is %p, chip->write is %p\n", drv_data->write, chip->write); - /* speed and width has been set on per message */ message->state = RUNNING_STATE; dma_config = 0; @@ -966,7 +962,7 @@ static u16 ssel[][MAX_SPI_SSEL] = { P_SPI2_SSEL6, P_SPI2_SSEL7}, }; -/* first setup for new devices */ +/* setup for devices (may be called multiple times -- not just first setup) */ static int bfin_spi_setup(struct spi_device *spi) { struct bfin5xx_spi_chip *chip_info; -- cgit v0.10.2 From f4f50c3ff7815d83dcbb19341f35db2f408ac4f8 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 00:41:49 +0000 Subject: spi/bfin_spi: convert queue run state to true/false No point in creating our own version of true/false defines when there is already a standard stdbool available to us. Reported-by: David Brownell Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 045c82a..40d9f64 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -41,8 +41,6 @@ MODULE_LICENSE("GPL"); #define RUNNING_STATE ((void *)1) #define DONE_STATE ((void *)2) #define ERROR_STATE ((void *)-1) -#define QUEUE_RUNNING 0 -#define QUEUE_STOPPED 1 struct driver_data { /* Driver model hookup */ @@ -66,7 +64,7 @@ struct driver_data { spinlock_t lock; struct list_head queue; int busy; - int run; + bool running; /* Message Transfer pump */ struct tasklet_struct pump_transfers; @@ -871,7 +869,7 @@ static void bfin_spi_pump_messages(struct work_struct *work) /* Lock queue and check for queue work */ spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { + if (list_empty(&drv_data->queue) || !drv_data->running) { /* pumper kicked off but no work to do */ drv_data->busy = 0; spin_unlock_irqrestore(&drv_data->lock, flags); @@ -926,7 +924,7 @@ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) spin_lock_irqsave(&drv_data->lock, flags); - if (drv_data->run == QUEUE_STOPPED) { + if (!drv_data->running) { spin_unlock_irqrestore(&drv_data->lock, flags); return -ESHUTDOWN; } @@ -938,7 +936,7 @@ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) dev_dbg(&spi->dev, "adding an msg in transfer() \n"); list_add_tail(&msg->queue, &drv_data->queue); - if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) + if (drv_data->running && !drv_data->busy) queue_work(drv_data->workqueue, &drv_data->pump_messages); spin_unlock_irqrestore(&drv_data->lock, flags); @@ -1177,7 +1175,7 @@ static inline int bfin_spi_init_queue(struct driver_data *drv_data) INIT_LIST_HEAD(&drv_data->queue); spin_lock_init(&drv_data->lock); - drv_data->run = QUEUE_STOPPED; + drv_data->running = false; drv_data->busy = 0; /* init transfer tasklet */ @@ -1200,12 +1198,12 @@ static inline int bfin_spi_start_queue(struct driver_data *drv_data) spin_lock_irqsave(&drv_data->lock, flags); - if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { + if (drv_data->running || drv_data->busy) { spin_unlock_irqrestore(&drv_data->lock, flags); return -EBUSY; } - drv_data->run = QUEUE_RUNNING; + drv_data->running = true; drv_data->cur_msg = NULL; drv_data->cur_transfer = NULL; drv_data->cur_chip = NULL; @@ -1230,7 +1228,7 @@ static inline int bfin_spi_stop_queue(struct driver_data *drv_data) * execution path (pump_messages) would be required to call wake_up or * friends on every SPI message. Do this instead */ - drv_data->run = QUEUE_STOPPED; + drv_data->running = false; while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { spin_unlock_irqrestore(&drv_data->lock, flags); msleep(10); -- cgit v0.10.2 From 9c4542c7a3082bf74f00145355ef407ac82c0b3f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 01:04:04 +0000 Subject: spi/bfin_spi: convert read/write/duplex funcs to a dedicated ops structure Rather than having to look up the same 3 sets of functions at the same time, just use an ops structure so we only need to set one pointer. Reported-by: David Brownell Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 40d9f64..b0de61a 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -42,6 +42,14 @@ MODULE_LICENSE("GPL"); #define DONE_STATE ((void *)2) #define ERROR_STATE ((void *)-1) +struct driver_data; + +struct transfer_ops { + void (*write) (struct driver_data *); + void (*read) (struct driver_data *); + void (*duplex) (struct driver_data *); +}; + struct driver_data { /* Driver model hookup */ struct platform_device *pdev; @@ -94,9 +102,7 @@ struct driver_data { size_t tx_map_len; u8 n_bytes; int cs_change; - void (*write) (struct driver_data *); - void (*read) (struct driver_data *); - void (*duplex) (struct driver_data *); + const struct transfer_ops *ops; }; struct chip_data { @@ -113,9 +119,7 @@ struct chip_data { u32 cs_gpio; u16 idle_tx_val; u8 pio_interrupt; /* use spi data irq */ - void (*write) (struct driver_data *); - void (*read) (struct driver_data *); - void (*duplex) (struct driver_data *); + const struct transfer_ops *ops; }; #define DEFINE_SPI_REG(reg, off) \ @@ -294,6 +298,12 @@ static void bfin_spi_u8_duplex(struct driver_data *drv_data) } } +static const struct transfer_ops bfin_transfer_ops_u8 = { + .write = bfin_spi_u8_writer, + .read = bfin_spi_u8_reader, + .duplex = bfin_spi_u8_duplex, +}; + static void bfin_spi_u16_writer(struct driver_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ @@ -342,6 +352,12 @@ static void bfin_spi_u16_duplex(struct driver_data *drv_data) } } +static const struct transfer_ops bfin_transfer_ops_u16 = { + .write = bfin_spi_u16_writer, + .read = bfin_spi_u16_reader, + .duplex = bfin_spi_u16_duplex, +}; + /* test if ther is more transfer to be done */ static void *bfin_spi_next_transfer(struct driver_data *drv_data) { @@ -620,17 +636,13 @@ static void bfin_spi_pump_transfers(unsigned long data) case 8: drv_data->n_bytes = 1; width = CFG_SPI_WORDSIZE8; - drv_data->read = bfin_spi_u8_reader; - drv_data->write = bfin_spi_u8_writer; - drv_data->duplex = bfin_spi_u8_duplex; + drv_data->ops = &bfin_transfer_ops_u8; break; case 16: drv_data->n_bytes = 2; width = CFG_SPI_WORDSIZE16; - drv_data->read = bfin_spi_u16_reader; - drv_data->write = bfin_spi_u16_writer; - drv_data->duplex = bfin_spi_u16_duplex; + drv_data->ops = &bfin_transfer_ops_u16; break; default: @@ -638,9 +650,7 @@ static void bfin_spi_pump_transfers(unsigned long data) transfer->bits_per_word = chip->bits_per_word; drv_data->n_bytes = chip->n_bytes; width = chip->width; - drv_data->write = chip->write; - drv_data->read = chip->read; - drv_data->duplex = chip->duplex; + drv_data->ops = chip->ops; break; } cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); @@ -653,8 +663,8 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->len = transfer->len; } dev_dbg(&drv_data->pdev->dev, - "transfer: drv_data->write is %p, chip->write is %p\n", - drv_data->write, chip->write); + "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", + drv_data->ops, chip->ops, &bfin_transfer_ops_u8); message->state = RUNNING_STATE; dma_config = 0; @@ -819,7 +829,7 @@ static void bfin_spi_pump_transfers(unsigned long data) dev_dbg(&drv_data->pdev->dev, "IO duplex: cr is 0x%x\n", cr); - drv_data->duplex(drv_data); + drv_data->ops->duplex(drv_data); if (drv_data->tx != drv_data->tx_end) tranf_success = 0; @@ -828,7 +838,7 @@ static void bfin_spi_pump_transfers(unsigned long data) dev_dbg(&drv_data->pdev->dev, "IO write: cr is 0x%x\n", cr); - drv_data->write(drv_data); + drv_data->ops->write(drv_data); if (drv_data->tx != drv_data->tx_end) tranf_success = 0; @@ -837,7 +847,7 @@ static void bfin_spi_pump_transfers(unsigned long data) dev_dbg(&drv_data->pdev->dev, "IO read: cr is 0x%x\n", cr); - drv_data->read(drv_data); + drv_data->ops->read(drv_data); if (drv_data->rx != drv_data->rx_end) tranf_success = 0; } @@ -1032,17 +1042,13 @@ static int bfin_spi_setup(struct spi_device *spi) case 8: chip->n_bytes = 1; chip->width = CFG_SPI_WORDSIZE8; - chip->read = bfin_spi_u8_reader; - chip->write = bfin_spi_u8_writer; - chip->duplex = bfin_spi_u8_duplex; + chip->ops = &bfin_transfer_ops_u8; break; case 16: chip->n_bytes = 2; chip->width = CFG_SPI_WORDSIZE16; - chip->read = bfin_spi_u16_reader; - chip->write = bfin_spi_u16_writer; - chip->duplex = bfin_spi_u16_duplex; + chip->ops = &bfin_transfer_ops_u16; break; default: -- cgit v0.10.2 From b9f139a7a6a8b24e61ad94c3334eb26f34a4cb63 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 01:27:47 +0000 Subject: spi/bfin_spi: convert struct names to something more logical The current structure names are a bit confusing as to what they represent, so use better names. Reported-by: David Brownell Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index b0de61a..9a1801b 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -42,15 +42,15 @@ MODULE_LICENSE("GPL"); #define DONE_STATE ((void *)2) #define ERROR_STATE ((void *)-1) -struct driver_data; +struct master_data; struct transfer_ops { - void (*write) (struct driver_data *); - void (*read) (struct driver_data *); - void (*duplex) (struct driver_data *); + void (*write) (struct master_data *); + void (*read) (struct master_data *); + void (*duplex) (struct master_data *); }; -struct driver_data { +struct master_data { /* Driver model hookup */ struct platform_device *pdev; @@ -80,7 +80,7 @@ struct driver_data { /* Current message transfer state info */ struct spi_message *cur_msg; struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; + struct slave_data *cur_chip; size_t len_in_bytes; size_t len; void *tx; @@ -105,7 +105,7 @@ struct driver_data { const struct transfer_ops *ops; }; -struct chip_data { +struct slave_data { u16 ctl_reg; u16 baud; u16 flag; @@ -123,9 +123,9 @@ struct chip_data { }; #define DEFINE_SPI_REG(reg, off) \ -static inline u16 read_##reg(struct driver_data *drv_data) \ +static inline u16 read_##reg(struct master_data *drv_data) \ { return bfin_read16(drv_data->regs_base + off); } \ -static inline void write_##reg(struct driver_data *drv_data, u16 v) \ +static inline void write_##reg(struct master_data *drv_data, u16 v) \ { bfin_write16(drv_data->regs_base + off, v); } DEFINE_SPI_REG(CTRL, 0x00) @@ -136,7 +136,7 @@ DEFINE_SPI_REG(RDBR, 0x10) DEFINE_SPI_REG(BAUD, 0x14) DEFINE_SPI_REG(SHAW, 0x18) -static void bfin_spi_enable(struct driver_data *drv_data) +static void bfin_spi_enable(struct master_data *drv_data) { u16 cr; @@ -144,7 +144,7 @@ static void bfin_spi_enable(struct driver_data *drv_data) write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); } -static void bfin_spi_disable(struct driver_data *drv_data) +static void bfin_spi_disable(struct master_data *drv_data) { u16 cr; @@ -167,7 +167,7 @@ static u16 hz_to_spi_baud(u32 speed_hz) return spi_baud; } -static int bfin_spi_flush(struct driver_data *drv_data) +static int bfin_spi_flush(struct master_data *drv_data) { unsigned long limit = loops_per_jiffy << 1; @@ -181,7 +181,7 @@ static int bfin_spi_flush(struct driver_data *drv_data) } /* Chip select operation functions for cs_change flag */ -static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *chip) +static void bfin_spi_cs_active(struct master_data *drv_data, struct slave_data *chip) { if (likely(chip->chip_select_num)) { u16 flag = read_FLAG(drv_data); @@ -194,7 +194,7 @@ static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *c } } -static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data *chip) +static void bfin_spi_cs_deactive(struct master_data *drv_data, struct slave_data *chip) { if (likely(chip->chip_select_num)) { u16 flag = read_FLAG(drv_data); @@ -212,7 +212,7 @@ static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data } /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ -static inline void bfin_spi_cs_enable(struct driver_data *drv_data, struct chip_data *chip) +static inline void bfin_spi_cs_enable(struct master_data *drv_data, struct slave_data *chip) { u16 flag = read_FLAG(drv_data); @@ -221,7 +221,7 @@ static inline void bfin_spi_cs_enable(struct driver_data *drv_data, struct chip_ write_FLAG(drv_data, flag); } -static inline void bfin_spi_cs_disable(struct driver_data *drv_data, struct chip_data *chip) +static inline void bfin_spi_cs_disable(struct master_data *drv_data, struct slave_data *chip) { u16 flag = read_FLAG(drv_data); @@ -231,9 +231,9 @@ static inline void bfin_spi_cs_disable(struct driver_data *drv_data, struct chip } /* stop controller and re-config current chip*/ -static void bfin_spi_restore_state(struct driver_data *drv_data) +static void bfin_spi_restore_state(struct master_data *drv_data) { - struct chip_data *chip = drv_data->cur_chip; + struct slave_data *chip = drv_data->cur_chip; /* Clear status and disable clock */ write_STAT(drv_data, BIT_STAT_CLR); @@ -249,12 +249,12 @@ static void bfin_spi_restore_state(struct driver_data *drv_data) } /* used to kick off transfer in rx mode and read unwanted RX data */ -static inline void bfin_spi_dummy_read(struct driver_data *drv_data) +static inline void bfin_spi_dummy_read(struct master_data *drv_data) { (void) read_RDBR(drv_data); } -static void bfin_spi_u8_writer(struct driver_data *drv_data) +static void bfin_spi_u8_writer(struct master_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ bfin_spi_dummy_read(drv_data); @@ -270,7 +270,7 @@ static void bfin_spi_u8_writer(struct driver_data *drv_data) } } -static void bfin_spi_u8_reader(struct driver_data *drv_data) +static void bfin_spi_u8_reader(struct master_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -285,7 +285,7 @@ static void bfin_spi_u8_reader(struct driver_data *drv_data) } } -static void bfin_spi_u8_duplex(struct driver_data *drv_data) +static void bfin_spi_u8_duplex(struct master_data *drv_data) { /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -304,7 +304,7 @@ static const struct transfer_ops bfin_transfer_ops_u8 = { .duplex = bfin_spi_u8_duplex, }; -static void bfin_spi_u16_writer(struct driver_data *drv_data) +static void bfin_spi_u16_writer(struct master_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ bfin_spi_dummy_read(drv_data); @@ -321,7 +321,7 @@ static void bfin_spi_u16_writer(struct driver_data *drv_data) } } -static void bfin_spi_u16_reader(struct driver_data *drv_data) +static void bfin_spi_u16_reader(struct master_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -337,7 +337,7 @@ static void bfin_spi_u16_reader(struct driver_data *drv_data) } } -static void bfin_spi_u16_duplex(struct driver_data *drv_data) +static void bfin_spi_u16_duplex(struct master_data *drv_data) { /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -359,7 +359,7 @@ static const struct transfer_ops bfin_transfer_ops_u16 = { }; /* test if ther is more transfer to be done */ -static void *bfin_spi_next_transfer(struct driver_data *drv_data) +static void *bfin_spi_next_transfer(struct master_data *drv_data) { struct spi_message *msg = drv_data->cur_msg; struct spi_transfer *trans = drv_data->cur_transfer; @@ -378,9 +378,9 @@ static void *bfin_spi_next_transfer(struct driver_data *drv_data) * caller already set message->status; * dma and pio irqs are blocked give finished message back */ -static void bfin_spi_giveback(struct driver_data *drv_data) +static void bfin_spi_giveback(struct master_data *drv_data) { - struct chip_data *chip = drv_data->cur_chip; + struct slave_data *chip = drv_data->cur_chip; struct spi_transfer *last_transfer; unsigned long flags; struct spi_message *msg; @@ -412,8 +412,8 @@ static void bfin_spi_giveback(struct driver_data *drv_data) /* spi data irq handler */ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) { - struct driver_data *drv_data = dev_id; - struct chip_data *chip = drv_data->cur_chip; + struct master_data *drv_data = dev_id; + struct slave_data *chip = drv_data->cur_chip; struct spi_message *msg = drv_data->cur_msg; int n_bytes = drv_data->n_bytes; @@ -484,8 +484,8 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) { - struct driver_data *drv_data = dev_id; - struct chip_data *chip = drv_data->cur_chip; + struct master_data *drv_data = dev_id; + struct slave_data *chip = drv_data->cur_chip; struct spi_message *msg = drv_data->cur_msg; unsigned long timeout; unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); @@ -548,11 +548,11 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) static void bfin_spi_pump_transfers(unsigned long data) { - struct driver_data *drv_data = (struct driver_data *)data; + struct master_data *drv_data = (struct master_data *)data; struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; - struct chip_data *chip = NULL; + struct slave_data *chip = NULL; u8 width; u16 cr, dma_width, dma_config; u32 tranf_success = 1; @@ -872,10 +872,10 @@ static void bfin_spi_pump_transfers(unsigned long data) /* pop a msg from queue and kick off real transfer */ static void bfin_spi_pump_messages(struct work_struct *work) { - struct driver_data *drv_data; + struct master_data *drv_data; unsigned long flags; - drv_data = container_of(work, struct driver_data, pump_messages); + drv_data = container_of(work, struct master_data, pump_messages); /* Lock queue and check for queue work */ spin_lock_irqsave(&drv_data->lock, flags); @@ -929,7 +929,7 @@ static void bfin_spi_pump_messages(struct work_struct *work) */ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) { - struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct master_data *drv_data = spi_master_get_devdata(spi->master); unsigned long flags; spin_lock_irqsave(&drv_data->lock, flags); @@ -974,8 +974,8 @@ static u16 ssel[][MAX_SPI_SSEL] = { static int bfin_spi_setup(struct spi_device *spi) { struct bfin5xx_spi_chip *chip_info; - struct chip_data *chip = NULL; - struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct slave_data *chip = NULL; + struct master_data *drv_data = spi_master_get_devdata(spi->master); int ret = -EINVAL; if (spi->bits_per_word != 8 && spi->bits_per_word != 16) @@ -1155,8 +1155,8 @@ static int bfin_spi_setup(struct spi_device *spi) */ static void bfin_spi_cleanup(struct spi_device *spi) { - struct chip_data *chip = spi_get_ctldata(spi); - struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct slave_data *chip = spi_get_ctldata(spi); + struct master_data *drv_data = spi_master_get_devdata(spi->master); if (!chip) return; @@ -1176,7 +1176,7 @@ static void bfin_spi_cleanup(struct spi_device *spi) spi_set_ctldata(spi, NULL); } -static inline int bfin_spi_init_queue(struct driver_data *drv_data) +static inline int bfin_spi_init_queue(struct master_data *drv_data) { INIT_LIST_HEAD(&drv_data->queue); spin_lock_init(&drv_data->lock); @@ -1198,7 +1198,7 @@ static inline int bfin_spi_init_queue(struct driver_data *drv_data) return 0; } -static inline int bfin_spi_start_queue(struct driver_data *drv_data) +static inline int bfin_spi_start_queue(struct master_data *drv_data) { unsigned long flags; @@ -1220,7 +1220,7 @@ static inline int bfin_spi_start_queue(struct driver_data *drv_data) return 0; } -static inline int bfin_spi_stop_queue(struct driver_data *drv_data) +static inline int bfin_spi_stop_queue(struct master_data *drv_data) { unsigned long flags; unsigned limit = 500; @@ -1249,7 +1249,7 @@ static inline int bfin_spi_stop_queue(struct driver_data *drv_data) return status; } -static inline int bfin_spi_destroy_queue(struct driver_data *drv_data) +static inline int bfin_spi_destroy_queue(struct master_data *drv_data) { int status; @@ -1267,14 +1267,14 @@ static int __init bfin_spi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct bfin5xx_spi_master *platform_info; struct spi_master *master; - struct driver_data *drv_data = 0; + struct master_data *drv_data = 0; struct resource *res; int status = 0; platform_info = dev->platform_data; /* Allocate master with space for drv_data */ - master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); + master = spi_alloc_master(dev, sizeof(struct master_data) + 16); if (!master) { dev_err(&pdev->dev, "can not alloc spi_master\n"); return -ENOMEM; @@ -1377,7 +1377,7 @@ out_error_get_res: /* stop hardware and remove the driver */ static int __devexit bfin_spi_remove(struct platform_device *pdev) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct master_data *drv_data = platform_get_drvdata(pdev); int status = 0; if (!drv_data) @@ -1416,7 +1416,7 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct master_data *drv_data = platform_get_drvdata(pdev); int status = 0; status = bfin_spi_stop_queue(drv_data); @@ -1431,7 +1431,7 @@ static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) static int bfin_spi_resume(struct platform_device *pdev) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct master_data *drv_data = platform_get_drvdata(pdev); int status = 0; /* Enable the SPI interface */ -- cgit v0.10.2 From 2a045131db69c207b9e3f9614b2c9b0f2e82bcb7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 01:28:54 +0000 Subject: spi/bfin_spi: drop extra memory we don't need The driver that we based ours on uses a little extra memory behind the normal driver state, but we don't. So drop this useless bit of memory. Reported-by: David Brownell Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 9a1801b..ffff099 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1267,14 +1267,14 @@ static int __init bfin_spi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct bfin5xx_spi_master *platform_info; struct spi_master *master; - struct master_data *drv_data = 0; + struct master_data *drv_data; struct resource *res; int status = 0; platform_info = dev->platform_data; /* Allocate master with space for drv_data */ - master = spi_alloc_master(dev, sizeof(struct master_data) + 16); + master = spi_alloc_master(dev, sizeof(*drv_data)); if (!master) { dev_err(&pdev->dev, "can not alloc spi_master\n"); return -ENOMEM; -- cgit v0.10.2 From 90008a641dd832cc2e2c4d21b7da94de91e9d0a4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 15 Oct 2009 04:13:29 +0000 Subject: spi/bfin_spi: use the SPI namespaced bit names This lets us push the short SPI MMR bit names out of the global namespace. Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index ffff099..07044d7 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -504,8 +504,8 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) * register until it goes low for 2 successive reads */ if (drv_data->tx != NULL) { - while ((read_STAT(drv_data) & TXS) || - (read_STAT(drv_data) & TXS)) + while ((read_STAT(drv_data) & BIT_STAT_TXS) || + (read_STAT(drv_data) & BIT_STAT_TXS)) cpu_relax(); } @@ -514,14 +514,14 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) dmastat, read_STAT(drv_data)); timeout = jiffies + HZ; - while (!(read_STAT(drv_data) & SPIF)) + while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) if (!time_before(jiffies, timeout)) { dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF"); break; } else cpu_relax(); - if ((dmastat & DMA_ERR) && (spistat & RBSY)) { + if ((dmastat & DMA_ERR) && (spistat & BIT_STAT_RBSY)) { msg->state = ERROR_STATE; dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n"); } else { @@ -1000,11 +1000,12 @@ static int bfin_spi_setup(struct spi_device *spi) if (chip_info) { /* Make sure people stop trying to set fields via ctl_reg * when they should actually be using common SPI framework. - * Currently we let through: WOM EMISO PSSE GM SZ TIMOD. + * Currently we let through: WOM EMISO PSSE GM SZ. * Not sure if a user actually needs/uses any of these, * but let's assume (for now) they do. */ - if (chip_info->ctl_reg & (SPE|MSTR|CPOL|CPHA|LSBF|SIZE)) { + if (chip_info->ctl_reg & ~(BIT_CTL_OPENDRAIN | BIT_CTL_EMISO | \ + BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ)) { dev_err(&spi->dev, "do not set bits in ctl_reg " "that the SPI framework manages\n"); goto error; @@ -1022,13 +1023,13 @@ static int bfin_spi_setup(struct spi_device *spi) /* translate common spi framework into our register */ if (spi->mode & SPI_CPOL) - chip->ctl_reg |= CPOL; + chip->ctl_reg |= BIT_CTL_CPOL; if (spi->mode & SPI_CPHA) - chip->ctl_reg |= CPHA; + chip->ctl_reg |= BIT_CTL_CPHA; if (spi->mode & SPI_LSB_FIRST) - chip->ctl_reg |= LSBF; + chip->ctl_reg |= BIT_CTL_LSBF; /* we dont support running in slave mode (yet?) */ - chip->ctl_reg |= MSTR; + chip->ctl_reg |= BIT_CTL_MASTER; /* * Notice: for blackfin, the speed_hz is the value of register -- cgit v0.10.2 From 0d2c6de2255cb299fdd77d4543738adee45f4f3f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 15 Oct 2009 04:13:29 +0000 Subject: Blackfin: SPI: expand SPI bitmasks Expand the BIT_CTL defines to use the naming convention of the hardware, and expand the masks to cover all documented bits. Signed-off-by: Mike Frysinger diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index ee3ecb9..126d25e 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -26,11 +26,14 @@ #define BIT_CTL_ENABLE 0x4000 #define BIT_CTL_OPENDRAIN 0x2000 #define BIT_CTL_MASTER 0x1000 -#define BIT_CTL_POLAR 0x0800 -#define BIT_CTL_PHASE 0x0400 -#define BIT_CTL_BITORDER 0x0200 +#define BIT_CTL_CPOL 0x0800 +#define BIT_CTL_CPHA 0x0400 +#define BIT_CTL_LSBF 0x0200 #define BIT_CTL_WORDSIZE 0x0100 -#define BIT_CTL_MISOENABLE 0x0020 +#define BIT_CTL_EMISO 0x0020 +#define BIT_CTL_PSSE 0x0010 +#define BIT_CTL_GM 0x0008 +#define BIT_CTL_SZ 0x0004 #define BIT_CTL_RXMOD 0x0000 #define BIT_CTL_TXMOD 0x0001 #define BIT_CTL_TIMOD_DMA_TX 0x0003 -- cgit v0.10.2 From d3cc71f71ae13596cb988e16bfa2b15f09fb7347 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Tue, 17 Nov 2009 09:45:59 +0000 Subject: spi/bfin_spi: redo GPIO CS handling The common SPI layers take care of detecting CS conflicts and preventing two devices from claiming the same CS. This causes problems for the GPIO CS support we currently have as we are using CS0 to mean "GPIO CS". But if we have multiple devices using a GPIO CS, the common SPI layers see multiple devices using the virtual "CS0" and reject any such attempts. To make both work, we introduce an offset define. This represents the max number of hardware CS values that the SPI peripheral supports. If the CS is below this limit, we know we can use the hardware CS. If it's above, we treat it as a GPIO CS. This keeps the CS unique as seen by the common code and prevents conflicts. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index 126d25e..6f011da 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -109,6 +109,8 @@ #define CMD_SPI_GET_SYSTEMCLOCK 25 #define CMD_SPI_SET_WRITECONTINUOUS 26 +#define MAX_CTRL_CS 8 /* cs in spi controller */ + /* device.platform_data for SSP controller devices */ struct bfin5xx_spi_master { u16 num_chipselect; @@ -124,7 +126,6 @@ struct bfin5xx_spi_chip { u8 enable_dma; u8 bits_per_word; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ - u32 cs_gpio; /* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */ u16 idle_tx_val; u8 pio_interrupt; /* Enable spi data irq */ diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 07044d7..278fe0a 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -183,7 +183,7 @@ static int bfin_spi_flush(struct master_data *drv_data) /* Chip select operation functions for cs_change flag */ static void bfin_spi_cs_active(struct master_data *drv_data, struct slave_data *chip) { - if (likely(chip->chip_select_num)) { + if (likely(chip->chip_select_num < MAX_CTRL_CS)) { u16 flag = read_FLAG(drv_data); flag &= ~chip->flag; @@ -196,7 +196,7 @@ static void bfin_spi_cs_active(struct master_data *drv_data, struct slave_data * static void bfin_spi_cs_deactive(struct master_data *drv_data, struct slave_data *chip) { - if (likely(chip->chip_select_num)) { + if (likely(chip->chip_select_num < MAX_CTRL_CS)) { u16 flag = read_FLAG(drv_data); flag |= chip->flag; @@ -214,20 +214,24 @@ static void bfin_spi_cs_deactive(struct master_data *drv_data, struct slave_data /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ static inline void bfin_spi_cs_enable(struct master_data *drv_data, struct slave_data *chip) { - u16 flag = read_FLAG(drv_data); + if (chip->chip_select_num < MAX_CTRL_CS) { + u16 flag = read_FLAG(drv_data); - flag |= (chip->flag >> 8); + flag |= (chip->flag >> 8); - write_FLAG(drv_data, flag); + write_FLAG(drv_data, flag); + } } static inline void bfin_spi_cs_disable(struct master_data *drv_data, struct slave_data *chip) { - u16 flag = read_FLAG(drv_data); + if (chip->chip_select_num < MAX_CTRL_CS) { + u16 flag = read_FLAG(drv_data); - flag &= ~(chip->flag >> 8); + flag &= ~(chip->flag >> 8); - write_FLAG(drv_data, flag); + write_FLAG(drv_data, flag); + } } /* stop controller and re-config current chip*/ @@ -1016,7 +1020,6 @@ static int bfin_spi_setup(struct spi_device *spi) chip->ctl_reg = chip_info->ctl_reg; chip->bits_per_word = chip_info->bits_per_word; chip->cs_chg_udelay = chip_info->cs_chg_udelay; - chip->cs_gpio = chip_info->cs_gpio; chip->idle_tx_val = chip_info->idle_tx_val; chip->pio_interrupt = chip_info->pio_interrupt; } @@ -1036,8 +1039,11 @@ static int bfin_spi_setup(struct spi_device *spi) * SPI_BAUD, not the real baudrate */ chip->baud = hz_to_spi_baud(spi->max_speed_hz); - chip->flag = (1 << (spi->chip_select)) << 8; chip->chip_select_num = spi->chip_select; + if (chip->chip_select_num < MAX_CTRL_CS) + chip->flag = (1 << spi->chip_select) << 8; + else + chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS; switch (chip->bits_per_word) { case 8: @@ -1098,7 +1104,7 @@ static int bfin_spi_setup(struct spi_device *spi) disable_irq(drv_data->spi_irq); } - if (chip->chip_select_num == 0) { + if (chip->chip_select_num >= MAX_CTRL_CS) { ret = gpio_request(chip->cs_gpio, spi->modalias); if (ret) { dev_err(&spi->dev, "gpio_request() error\n"); @@ -1115,8 +1121,7 @@ static int bfin_spi_setup(struct spi_device *spi) spi_set_ctldata(spi, chip); dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num); - if (chip->chip_select_num > 0 && - chip->chip_select_num <= spi->master->num_chipselect) { + if (chip->chip_select_num < MAX_CTRL_CS) { ret = peripheral_request(ssel[spi->master->bus_num] [chip->chip_select_num-1], spi->modalias); if (ret) { @@ -1131,7 +1136,7 @@ static int bfin_spi_setup(struct spi_device *spi) return 0; pin_error: - if (chip->chip_select_num == 0) + if (chip->chip_select_num >= MAX_CTRL_CS) gpio_free(chip->cs_gpio); else peripheral_free(ssel[spi->master->bus_num] @@ -1162,14 +1167,11 @@ static void bfin_spi_cleanup(struct spi_device *spi) if (!chip) return; - if ((chip->chip_select_num > 0) - && (chip->chip_select_num <= spi->master->num_chipselect)) { + if (chip->chip_select_num < MAX_CTRL_CS) { peripheral_free(ssel[spi->master->bus_num] [chip->chip_select_num-1]); bfin_spi_cs_disable(drv_data, chip); - } - - if (chip->chip_select_num == 0) + } else gpio_free(chip->cs_gpio); kfree(chip); -- cgit v0.10.2 From b052fd0a44354c655eb98fd715ef52857631dfef Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 18 Nov 2009 09:43:21 +0000 Subject: spi/bfin_spi: save/restore state when suspending/resuming We can't rely on the SPI_CTL/SPI_FLG registers retaining their state when suspending, so save/restore their entire values. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 278fe0a..c23ac3b 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -101,6 +101,9 @@ struct master_data { size_t rx_map_len; size_t tx_map_len; u8 n_bytes; + u16 ctrl_reg; + u16 flag_reg; + int cs_change; const struct transfer_ops *ops; }; @@ -1426,8 +1429,14 @@ static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) if (status != 0) return status; - /* stop hardware */ - bfin_spi_disable(drv_data); + drv_data->ctrl_reg = read_CTRL(drv_data); + drv_data->flag_reg = read_FLAG(drv_data); + + /* + * reset SPI_CTL and SPI_FLG registers + */ + write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); + write_FLAG(drv_data, 0xFF00); return 0; } @@ -1437,8 +1446,8 @@ static int bfin_spi_resume(struct platform_device *pdev) struct master_data *drv_data = platform_get_drvdata(pdev); int status = 0; - /* Enable the SPI interface */ - bfin_spi_enable(drv_data); + write_CTRL(drv_data, drv_data->ctrl_reg); + write_FLAG(drv_data, drv_data->flag_reg); /* Start the queue running */ status = bfin_spi_start_queue(drv_data); -- cgit v0.10.2 From 9677b0de10433d31e05864dfb4bf33d0c27f752a Mon Sep 17 00:00:00 2001 From: Barry Song Date: Mon, 30 Nov 2009 03:49:41 +0000 Subject: spi/bfin_spi: sync hardware state before reprogramming everything Sometimes under load, the Blackfin core is able to send SPI register updates out before the controller is actually disabled. So when we go to reprogram the entire state (to switch to a different slave), make sure we sync after disabling the controller. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index c23ac3b..54f9dbb 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -247,6 +247,8 @@ static void bfin_spi_restore_state(struct master_data *drv_data) bfin_spi_disable(drv_data); dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); + SSYNC(); + /* Load the registers */ write_CTRL(drv_data, chip->ctl_reg); write_BAUD(drv_data, chip->baud); -- cgit v0.10.2 From 7370ed6b91c37d7022a89a820b0fcd3156fa87fc Mon Sep 17 00:00:00 2001 From: Yi Li Date: Mon, 7 Dec 2009 08:07:01 +0000 Subject: spi/bfin_spi: use nosync when disabling the IRQ from the IRQ handler Using disable_irq() on the IRQ whose handler we are currently executing in can easily lead to a hang. So use the nosync variant here. Signed-off-by: Yi Li Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 54f9dbb..d446524 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -448,7 +448,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) /* Move to next transfer */ msg->state = bfin_spi_next_transfer(drv_data); - disable_irq(drv_data->spi_irq); + disable_irq_nosync(drv_data->spi_irq); /* Schedule transfer tasklet */ tasklet_schedule(&drv_data->pump_transfers); -- cgit v0.10.2 From 033f44bd0ebca1809e8274237a64263d909f01a7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 18 Dec 2009 17:38:04 +0000 Subject: spi/bfin_spi: push all size checks into the transfer function This reduces duplication between the setup/transfer functions and keeps values cached during setup from overriding values changed on a transfer basis (like bits_per_word). Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index d446524..830c705 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -114,10 +114,7 @@ struct slave_data { u16 flag; u8 chip_select_num; - u8 n_bytes; - u8 width; /* 0 or 1 */ u8 enable_dma; - u8 bits_per_word; /* 8 or 16 */ u16 cs_chg_udelay; /* Some devices require > 255usec delay */ u32 cs_gpio; u16 idle_tx_val; @@ -562,6 +559,7 @@ static void bfin_spi_pump_transfers(unsigned long data) struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; struct slave_data *chip = NULL; + unsigned int bits_per_word; u8 width; u16 cr, dma_width, dma_config; u32 tranf_success = 1; @@ -641,26 +639,15 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - switch (transfer->bits_per_word) { - case 8: + bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; + if (bits_per_word == 8) { drv_data->n_bytes = 1; width = CFG_SPI_WORDSIZE8; drv_data->ops = &bfin_transfer_ops_u8; - break; - - case 16: + } else { drv_data->n_bytes = 2; width = CFG_SPI_WORDSIZE16; drv_data->ops = &bfin_transfer_ops_u16; - break; - - default: - /* No change, the same as default setting */ - transfer->bits_per_word = chip->bits_per_word; - drv_data->n_bytes = chip->n_bytes; - width = chip->width; - drv_data->ops = chip->ops; - break; } cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); cr |= (width << 8); @@ -811,9 +798,9 @@ static void bfin_spi_pump_transfers(unsigned long data) if (drv_data->tx == NULL) write_TDBR(drv_data, chip->idle_tx_val); else { - if (transfer->bits_per_word == 8) + if (bits_per_word == 8) write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); - else if (transfer->bits_per_word == 16) + else write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); drv_data->tx += drv_data->n_bytes; } @@ -987,9 +974,6 @@ static int bfin_spi_setup(struct spi_device *spi) struct master_data *drv_data = spi_master_get_devdata(spi->master); int ret = -EINVAL; - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) - goto error; - /* Only alloc (or use chip_info) on first setup */ chip_info = NULL; chip = spi_get_ctldata(spi); @@ -1023,10 +1007,16 @@ static int bfin_spi_setup(struct spi_device *spi) chip->enable_dma = chip_info->enable_dma != 0 && drv_data->master_info->enable_dma; chip->ctl_reg = chip_info->ctl_reg; - chip->bits_per_word = chip_info->bits_per_word; chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->idle_tx_val = chip_info->idle_tx_val; chip->pio_interrupt = chip_info->pio_interrupt; + spi->bits_per_word = chip_info->bits_per_word; + } + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { + dev_err(&spi->dev, "%d bits_per_word is not supported\n", + spi->bits_per_word); + goto error; } /* translate common spi framework into our register */ @@ -1050,25 +1040,6 @@ static int bfin_spi_setup(struct spi_device *spi) else chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS; - switch (chip->bits_per_word) { - case 8: - chip->n_bytes = 1; - chip->width = CFG_SPI_WORDSIZE8; - chip->ops = &bfin_transfer_ops_u8; - break; - - case 16: - chip->n_bytes = 2; - chip->width = CFG_SPI_WORDSIZE16; - chip->ops = &bfin_transfer_ops_u16; - break; - - default: - dev_err(&spi->dev, "%d bits_per_word is not supported\n", - chip->bits_per_word); - goto error; - } - if (chip->enable_dma && chip->pio_interrupt) { dev_err(&spi->dev, "enable_dma is set, " "do not set pio_interrupt\n"); @@ -1119,7 +1090,7 @@ static int bfin_spi_setup(struct spi_device *spi) } dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n", - spi->modalias, chip->width, chip->enable_dma); + spi->modalias, spi->bits_per_word, chip->enable_dma); dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n", chip->ctl_reg, chip->flag); -- cgit v0.10.2 From 5b47bcd48b3bd53c86040321de0d348aadebed87 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 18 Dec 2009 17:43:31 +0000 Subject: spi/bfin_spi: reset ctl_reg bits when setup is run again on a device During runtime, the spi setup function may be called multiple times on the same device in order to reconfigure some settings on the fly. When this happens, we need to reset the ctl_reg bits so that changing the mode works as expected. Reported-by: Andy Getzendanner Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 830c705..376f2f0 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -972,6 +972,7 @@ static int bfin_spi_setup(struct spi_device *spi) struct bfin5xx_spi_chip *chip_info; struct slave_data *chip = NULL; struct master_data *drv_data = spi_master_get_devdata(spi->master); + u16 bfin_ctl_reg; int ret = -EINVAL; /* Only alloc (or use chip_info) on first setup */ @@ -989,6 +990,10 @@ static int bfin_spi_setup(struct spi_device *spi) chip_info = spi->controller_data; } + /* Let people set non-standard bits directly */ + bfin_ctl_reg = BIT_CTL_OPENDRAIN | BIT_CTL_EMISO | + BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ; + /* chip_info isn't always needed */ if (chip_info) { /* Make sure people stop trying to set fields via ctl_reg @@ -997,13 +1002,11 @@ static int bfin_spi_setup(struct spi_device *spi) * Not sure if a user actually needs/uses any of these, * but let's assume (for now) they do. */ - if (chip_info->ctl_reg & ~(BIT_CTL_OPENDRAIN | BIT_CTL_EMISO | \ - BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ)) { + if (chip_info->ctl_reg & ~bfin_ctl_reg) { dev_err(&spi->dev, "do not set bits in ctl_reg " "that the SPI framework manages\n"); goto error; } - chip->enable_dma = chip_info->enable_dma != 0 && drv_data->master_info->enable_dma; chip->ctl_reg = chip_info->ctl_reg; @@ -1011,6 +1014,9 @@ static int bfin_spi_setup(struct spi_device *spi) chip->idle_tx_val = chip_info->idle_tx_val; chip->pio_interrupt = chip_info->pio_interrupt; spi->bits_per_word = chip_info->bits_per_word; + } else { + /* force a default base state */ + chip->ctl_reg &= bfin_ctl_reg; } if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { -- cgit v0.10.2 From 5e8592dca303fb429d1641c205fe509f4b781ca2 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 18 Dec 2009 18:00:10 +0000 Subject: spi/bfin_spi: combine duplicate SPI_CTL read/write logic While combining things, also switch to the proper SPI bit define names. This lets us punt the rarely used SPI defines. Signed-off-by: Mike Frysinger diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index 6f011da..4223cf0 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -11,18 +11,6 @@ #define MIN_SPI_BAUD_VAL 2 -#define SPI_READ 0 -#define SPI_WRITE 1 - -#define SPI_CTRL_OFF 0x0 -#define SPI_FLAG_OFF 0x4 -#define SPI_STAT_OFF 0x8 -#define SPI_TXBUFF_OFF 0xc -#define SPI_RXBUFF_OFF 0x10 -#define SPI_BAUD_OFF 0x14 -#define SPI_SHAW_OFF 0x18 - - #define BIT_CTL_ENABLE 0x4000 #define BIT_CTL_OPENDRAIN 0x2000 #define BIT_CTL_MASTER 0x1000 @@ -53,62 +41,6 @@ #define BIT_STU_SENDOVER 0x0001 #define BIT_STU_RECVFULL 0x0020 -#define CFG_SPI_ENABLE 1 -#define CFG_SPI_DISABLE 0 - -#define CFG_SPI_OUTENABLE 1 -#define CFG_SPI_OUTDISABLE 0 - -#define CFG_SPI_ACTLOW 1 -#define CFG_SPI_ACTHIGH 0 - -#define CFG_SPI_PHASESTART 1 -#define CFG_SPI_PHASEMID 0 - -#define CFG_SPI_MASTER 1 -#define CFG_SPI_SLAVE 0 - -#define CFG_SPI_SENELAST 0 -#define CFG_SPI_SENDZERO 1 - -#define CFG_SPI_RCVFLUSH 1 -#define CFG_SPI_RCVDISCARD 0 - -#define CFG_SPI_LSBFIRST 1 -#define CFG_SPI_MSBFIRST 0 - -#define CFG_SPI_WORDSIZE16 1 -#define CFG_SPI_WORDSIZE8 0 - -#define CFG_SPI_MISOENABLE 1 -#define CFG_SPI_MISODISABLE 0 - -#define CFG_SPI_READ 0x00 -#define CFG_SPI_WRITE 0x01 -#define CFG_SPI_DMAREAD 0x02 -#define CFG_SPI_DMAWRITE 0x03 - -#define CFG_SPI_CSCLEARALL 0 -#define CFG_SPI_CHIPSEL1 1 -#define CFG_SPI_CHIPSEL2 2 -#define CFG_SPI_CHIPSEL3 3 -#define CFG_SPI_CHIPSEL4 4 -#define CFG_SPI_CHIPSEL5 5 -#define CFG_SPI_CHIPSEL6 6 -#define CFG_SPI_CHIPSEL7 7 - -#define CFG_SPI_CS1VALUE 1 -#define CFG_SPI_CS2VALUE 2 -#define CFG_SPI_CS3VALUE 3 -#define CFG_SPI_CS4VALUE 4 -#define CFG_SPI_CS5VALUE 5 -#define CFG_SPI_CS6VALUE 6 -#define CFG_SPI_CS7VALUE 7 - -#define CMD_SPI_SET_BAUDRATE 2 -#define CMD_SPI_GET_SYSTEMCLOCK 25 -#define CMD_SPI_SET_WRITECONTINUOUS 26 - #define MAX_CTRL_CS 8 /* cs in spi controller */ /* device.platform_data for SSP controller devices */ diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 376f2f0..b3450b7 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -560,8 +560,7 @@ static void bfin_spi_pump_transfers(unsigned long data) struct spi_transfer *previous = NULL; struct slave_data *chip = NULL; unsigned int bits_per_word; - u8 width; - u16 cr, dma_width, dma_config; + u16 cr, cr_width, dma_width, dma_config; u32 tranf_success = 1; u8 full_duplex = 0; @@ -642,22 +641,19 @@ static void bfin_spi_pump_transfers(unsigned long data) bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; if (bits_per_word == 8) { drv_data->n_bytes = 1; - width = CFG_SPI_WORDSIZE8; + drv_data->len = transfer->len; + cr_width = 0; drv_data->ops = &bfin_transfer_ops_u8; } else { drv_data->n_bytes = 2; - width = CFG_SPI_WORDSIZE16; + drv_data->len = (transfer->len) >> 1; + cr_width = BIT_CTL_WORDSIZE; drv_data->ops = &bfin_transfer_ops_u16; } - cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); - cr |= (width << 8); + cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); + cr |= cr_width; write_CTRL(drv_data, cr); - if (width == CFG_SPI_WORDSIZE16) { - drv_data->len = (transfer->len) >> 1; - } else { - drv_data->len = transfer->len; - } dev_dbg(&drv_data->pdev->dev, "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", drv_data->ops, chip->ops, &bfin_transfer_ops_u8); @@ -672,13 +668,12 @@ static void bfin_spi_pump_transfers(unsigned long data) write_BAUD(drv_data, chip->baud); write_STAT(drv_data, BIT_STAT_CLR); - cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); if (drv_data->cs_change) bfin_spi_cs_active(drv_data, chip); dev_dbg(&drv_data->pdev->dev, "now pumping a transfer: width is %d, len is %d\n", - width, transfer->len); + cr_width, transfer->len); /* * Try to map dma buffer and do a dma transfer. If successful use, @@ -697,7 +692,7 @@ static void bfin_spi_pump_transfers(unsigned long data) /* config dma channel */ dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n"); set_dma_x_count(drv_data->dma_channel, drv_data->len); - if (width == CFG_SPI_WORDSIZE16) { + if (cr_width == BIT_CTL_WORDSIZE) { set_dma_x_modify(drv_data->dma_channel, 2); dma_width = WDSIZE_16; } else { @@ -786,10 +781,16 @@ static void bfin_spi_pump_transfers(unsigned long data) return; } + /* + * We always use SPI_WRITE mode (transfer starts with TDBR write). + * SPI_READ mode (transfer starts with RDBR read) seems to have + * problems with setting up the output value in TDBR prior to the + * start of the transfer. + */ + write_CTRL(drv_data, cr | BIT_CTL_TXMOD); + if (chip->pio_interrupt) { - /* use write mode. spi irq should have been disabled */ - cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); - write_CTRL(drv_data, (cr | CFG_SPI_WRITE)); + /* SPI irq should have been disabled by now */ /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -813,11 +814,6 @@ static void bfin_spi_pump_transfers(unsigned long data) /* IO mode */ dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); - /* we always use SPI_WRITE mode. SPI_READ mode - seems to have problems with setting up the - output value in TDBR prior to the transfer. */ - write_CTRL(drv_data, (cr | CFG_SPI_WRITE)); - if (full_duplex) { /* full duplex mode */ BUG_ON((drv_data->tx_end - drv_data->tx) != -- cgit v0.10.2 From a75bd65b2189d711938d0fa7d9a79df47ddd66fa Mon Sep 17 00:00:00 2001 From: Barry Song Date: Fri, 22 Jan 2010 10:07:30 +0000 Subject: spi/bfin_spi: use dma_disable_irq_nosync() in irq handler Using disable_irq() on the IRQ whose handler we are currently executing in can easily lead to a hang. So use the nosync variant here. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index b3450b7..18b313a 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -547,7 +547,7 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) dev_dbg(&drv_data->pdev->dev, "disable dma channel irq%d\n", drv_data->dma_channel); - dma_disable_irq(drv_data->dma_channel); + dma_disable_irq_nosync(drv_data->dma_channel); return IRQ_HANDLED; } -- cgit v0.10.2 From 7715aad4ef5cccb318942a0c47aef8a39d6130d7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 25 Feb 2010 10:00:55 +0000 Subject: spi/bfin_spi: reject unsupported SPI modes Who knows what people will try! Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 18b313a..a91e556 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1022,6 +1022,10 @@ static int bfin_spi_setup(struct spi_device *spi) } /* translate common spi framework into our register */ + if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) { + dev_err(&spi->dev, "unsupported spi modes detected\n"); + goto error; + } if (spi->mode & SPI_CPOL) chip->ctl_reg |= BIT_CTL_CPOL; if (spi->mode & SPI_CPHA) -- cgit v0.10.2 From e35954053c1a2ede37f6ed1b28d626dba43dc79d Mon Sep 17 00:00:00 2001 From: Rob Maris Date: Tue, 6 Apr 2010 04:12:00 +0000 Subject: spi/bfin_spi: fix typo in comment Signed-off-by: Rob Maris Signed-off-by: Barry Song Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index a91e556..550aaf7 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -364,7 +364,7 @@ static const struct transfer_ops bfin_transfer_ops_u16 = { .duplex = bfin_spi_u16_duplex, }; -/* test if ther is more transfer to be done */ +/* test if there is more transfer to be done */ static void *bfin_spi_next_transfer(struct master_data *drv_data) { struct spi_message *msg = drv_data->cur_msg; -- cgit v0.10.2 From e72dcde72c712708e2145ab0ecff539ff4a4c7fb Mon Sep 17 00:00:00 2001 From: Rob Maris Date: Tue, 6 Apr 2010 04:17:08 +0000 Subject: spi/bfin_spi: cs should be always low when a new transfer begins Signed-off-by: Rob Maris Signed-off-by: Barry Song Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 550aaf7..7882afc 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -668,8 +668,7 @@ static void bfin_spi_pump_transfers(unsigned long data) write_BAUD(drv_data, chip->baud); write_STAT(drv_data, BIT_STAT_CLR); - if (drv_data->cs_change) - bfin_spi_cs_active(drv_data, chip); + bfin_spi_cs_active(drv_data, chip); dev_dbg(&drv_data->pdev->dev, "now pumping a transfer: width is %d, len is %d\n", -- cgit v0.10.2 From 4190f6a51f3f9c7c8298202d31b3ead9381c33f1 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Tue, 6 Apr 2010 03:36:24 +0000 Subject: spi/bfin_spi: warn when CS is driven by hardware (CPHA=0) When the hardware is controlling the CS, there are some SPI options we are unable to support. So issue a warning in the hopes that the user will change to a SPI mode where we can support things sanely. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 7882afc..21de860 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1040,9 +1040,14 @@ static int bfin_spi_setup(struct spi_device *spi) */ chip->baud = hz_to_spi_baud(spi->max_speed_hz); chip->chip_select_num = spi->chip_select; - if (chip->chip_select_num < MAX_CTRL_CS) + if (chip->chip_select_num < MAX_CTRL_CS) { + if (!(spi->mode & SPI_CPHA)) + dev_warn(&spi->dev, "Warning: SPI CPHA not set:" + " Slave Select not under software control!\n" + " See Documentation/blackfin/bfin-spi-notes.txt"); + chip->flag = (1 << spi->chip_select) << 8; - else + } else chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS; if (chip->enable_dma && chip->pio_interrupt) { -- cgit v0.10.2 From 2e768659df35ea337cb57ea3573c918d31e07894 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 17 Sep 2010 03:46:22 +0000 Subject: spi/bfin_spi: check per-transfer bits_per_word Currently, if the bits_per_word when doing a transfer is not 8bits, we always treat it as 16bits when we should actually be returning an error. Signed-off-by: Bob Liu Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 21de860..bd18214 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -644,11 +644,16 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->len = transfer->len; cr_width = 0; drv_data->ops = &bfin_transfer_ops_u8; - } else { + } else if (bits_per_word == 16) { drv_data->n_bytes = 2; drv_data->len = (transfer->len) >> 1; cr_width = BIT_CTL_WORDSIZE; drv_data->ops = &bfin_transfer_ops_u16; + } else { + dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n"); + message->status = -EINVAL; + bfin_spi_giveback(drv_data); + return; } cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); cr |= cr_width; -- cgit v0.10.2 From 6f7c17f4f91513247dfec52d6968cd70d5251b38 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 1 Jul 2010 14:34:10 +0000 Subject: spi/bfin_spi: init early Some systems using this bus sometimes have very basic devices on them such as regulators. So we need to be loaded even earlier in case the devices are used by things such as early board init code. Therefore register in subsys_initcall(). Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index bd18214..d17ab37 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1466,7 +1466,7 @@ static int __init bfin_spi_init(void) { return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe); } -module_init(bfin_spi_init); +subsys_initcall(bfin_spi_init); static void __exit bfin_spi_exit(void) { -- cgit v0.10.2 From 9c0a788b4315b83f6138ffa15c56ccf541106e58 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 18 Oct 2010 02:45:22 -0400 Subject: spi/bfin_spi: namespace local structs Signed-off-by: Mike Frysinger diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index d17ab37..ab483a0 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1,7 +1,7 @@ /* * Blackfin On-Chip SPI Driver * - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * @@ -42,15 +42,15 @@ MODULE_LICENSE("GPL"); #define DONE_STATE ((void *)2) #define ERROR_STATE ((void *)-1) -struct master_data; +struct bfin_spi_master_data; -struct transfer_ops { - void (*write) (struct master_data *); - void (*read) (struct master_data *); - void (*duplex) (struct master_data *); +struct bfin_spi_transfer_ops { + void (*write) (struct bfin_spi_master_data *); + void (*read) (struct bfin_spi_master_data *); + void (*duplex) (struct bfin_spi_master_data *); }; -struct master_data { +struct bfin_spi_master_data { /* Driver model hookup */ struct platform_device *pdev; @@ -80,7 +80,7 @@ struct master_data { /* Current message transfer state info */ struct spi_message *cur_msg; struct spi_transfer *cur_transfer; - struct slave_data *cur_chip; + struct bfin_spi_slave_data *cur_chip; size_t len_in_bytes; size_t len; void *tx; @@ -105,10 +105,10 @@ struct master_data { u16 flag_reg; int cs_change; - const struct transfer_ops *ops; + const struct bfin_spi_transfer_ops *ops; }; -struct slave_data { +struct bfin_spi_slave_data { u16 ctl_reg; u16 baud; u16 flag; @@ -119,13 +119,13 @@ struct slave_data { u32 cs_gpio; u16 idle_tx_val; u8 pio_interrupt; /* use spi data irq */ - const struct transfer_ops *ops; + const struct bfin_spi_transfer_ops *ops; }; #define DEFINE_SPI_REG(reg, off) \ -static inline u16 read_##reg(struct master_data *drv_data) \ +static inline u16 read_##reg(struct bfin_spi_master_data *drv_data) \ { return bfin_read16(drv_data->regs_base + off); } \ -static inline void write_##reg(struct master_data *drv_data, u16 v) \ +static inline void write_##reg(struct bfin_spi_master_data *drv_data, u16 v) \ { bfin_write16(drv_data->regs_base + off, v); } DEFINE_SPI_REG(CTRL, 0x00) @@ -136,7 +136,7 @@ DEFINE_SPI_REG(RDBR, 0x10) DEFINE_SPI_REG(BAUD, 0x14) DEFINE_SPI_REG(SHAW, 0x18) -static void bfin_spi_enable(struct master_data *drv_data) +static void bfin_spi_enable(struct bfin_spi_master_data *drv_data) { u16 cr; @@ -144,7 +144,7 @@ static void bfin_spi_enable(struct master_data *drv_data) write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); } -static void bfin_spi_disable(struct master_data *drv_data) +static void bfin_spi_disable(struct bfin_spi_master_data *drv_data) { u16 cr; @@ -167,7 +167,7 @@ static u16 hz_to_spi_baud(u32 speed_hz) return spi_baud; } -static int bfin_spi_flush(struct master_data *drv_data) +static int bfin_spi_flush(struct bfin_spi_master_data *drv_data) { unsigned long limit = loops_per_jiffy << 1; @@ -181,7 +181,7 @@ static int bfin_spi_flush(struct master_data *drv_data) } /* Chip select operation functions for cs_change flag */ -static void bfin_spi_cs_active(struct master_data *drv_data, struct slave_data *chip) +static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) { if (likely(chip->chip_select_num < MAX_CTRL_CS)) { u16 flag = read_FLAG(drv_data); @@ -194,7 +194,8 @@ static void bfin_spi_cs_active(struct master_data *drv_data, struct slave_data * } } -static void bfin_spi_cs_deactive(struct master_data *drv_data, struct slave_data *chip) +static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) { if (likely(chip->chip_select_num < MAX_CTRL_CS)) { u16 flag = read_FLAG(drv_data); @@ -212,7 +213,8 @@ static void bfin_spi_cs_deactive(struct master_data *drv_data, struct slave_data } /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ -static inline void bfin_spi_cs_enable(struct master_data *drv_data, struct slave_data *chip) +static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) { if (chip->chip_select_num < MAX_CTRL_CS) { u16 flag = read_FLAG(drv_data); @@ -223,7 +225,8 @@ static inline void bfin_spi_cs_enable(struct master_data *drv_data, struct slave } } -static inline void bfin_spi_cs_disable(struct master_data *drv_data, struct slave_data *chip) +static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) { if (chip->chip_select_num < MAX_CTRL_CS) { u16 flag = read_FLAG(drv_data); @@ -235,9 +238,9 @@ static inline void bfin_spi_cs_disable(struct master_data *drv_data, struct slav } /* stop controller and re-config current chip*/ -static void bfin_spi_restore_state(struct master_data *drv_data) +static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data) { - struct slave_data *chip = drv_data->cur_chip; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; /* Clear status and disable clock */ write_STAT(drv_data, BIT_STAT_CLR); @@ -255,12 +258,12 @@ static void bfin_spi_restore_state(struct master_data *drv_data) } /* used to kick off transfer in rx mode and read unwanted RX data */ -static inline void bfin_spi_dummy_read(struct master_data *drv_data) +static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data) { (void) read_RDBR(drv_data); } -static void bfin_spi_u8_writer(struct master_data *drv_data) +static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ bfin_spi_dummy_read(drv_data); @@ -276,7 +279,7 @@ static void bfin_spi_u8_writer(struct master_data *drv_data) } } -static void bfin_spi_u8_reader(struct master_data *drv_data) +static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -291,7 +294,7 @@ static void bfin_spi_u8_reader(struct master_data *drv_data) } } -static void bfin_spi_u8_duplex(struct master_data *drv_data) +static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data) { /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -304,13 +307,13 @@ static void bfin_spi_u8_duplex(struct master_data *drv_data) } } -static const struct transfer_ops bfin_transfer_ops_u8 = { +static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = { .write = bfin_spi_u8_writer, .read = bfin_spi_u8_reader, .duplex = bfin_spi_u8_duplex, }; -static void bfin_spi_u16_writer(struct master_data *drv_data) +static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ bfin_spi_dummy_read(drv_data); @@ -327,7 +330,7 @@ static void bfin_spi_u16_writer(struct master_data *drv_data) } } -static void bfin_spi_u16_reader(struct master_data *drv_data) +static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -343,7 +346,7 @@ static void bfin_spi_u16_reader(struct master_data *drv_data) } } -static void bfin_spi_u16_duplex(struct master_data *drv_data) +static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data) { /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -358,14 +361,14 @@ static void bfin_spi_u16_duplex(struct master_data *drv_data) } } -static const struct transfer_ops bfin_transfer_ops_u16 = { +static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = { .write = bfin_spi_u16_writer, .read = bfin_spi_u16_reader, .duplex = bfin_spi_u16_duplex, }; /* test if there is more transfer to be done */ -static void *bfin_spi_next_transfer(struct master_data *drv_data) +static void *bfin_spi_next_transfer(struct bfin_spi_master_data *drv_data) { struct spi_message *msg = drv_data->cur_msg; struct spi_transfer *trans = drv_data->cur_transfer; @@ -384,9 +387,9 @@ static void *bfin_spi_next_transfer(struct master_data *drv_data) * caller already set message->status; * dma and pio irqs are blocked give finished message back */ -static void bfin_spi_giveback(struct master_data *drv_data) +static void bfin_spi_giveback(struct bfin_spi_master_data *drv_data) { - struct slave_data *chip = drv_data->cur_chip; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; struct spi_transfer *last_transfer; unsigned long flags; struct spi_message *msg; @@ -418,8 +421,8 @@ static void bfin_spi_giveback(struct master_data *drv_data) /* spi data irq handler */ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) { - struct master_data *drv_data = dev_id; - struct slave_data *chip = drv_data->cur_chip; + struct bfin_spi_master_data *drv_data = dev_id; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; struct spi_message *msg = drv_data->cur_msg; int n_bytes = drv_data->n_bytes; @@ -490,8 +493,8 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) { - struct master_data *drv_data = dev_id; - struct slave_data *chip = drv_data->cur_chip; + struct bfin_spi_master_data *drv_data = dev_id; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; struct spi_message *msg = drv_data->cur_msg; unsigned long timeout; unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); @@ -554,11 +557,11 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) static void bfin_spi_pump_transfers(unsigned long data) { - struct master_data *drv_data = (struct master_data *)data; + struct bfin_spi_master_data *drv_data = (struct bfin_spi_master_data *)data; struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; - struct slave_data *chip = NULL; + struct bfin_spi_slave_data *chip = NULL; unsigned int bits_per_word; u16 cr, cr_width, dma_width, dma_config; u32 tranf_success = 1; @@ -643,12 +646,12 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->n_bytes = 1; drv_data->len = transfer->len; cr_width = 0; - drv_data->ops = &bfin_transfer_ops_u8; + drv_data->ops = &bfin_bfin_spi_transfer_ops_u8; } else if (bits_per_word == 16) { drv_data->n_bytes = 2; drv_data->len = (transfer->len) >> 1; cr_width = BIT_CTL_WORDSIZE; - drv_data->ops = &bfin_transfer_ops_u16; + drv_data->ops = &bfin_bfin_spi_transfer_ops_u16; } else { dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n"); message->status = -EINVAL; @@ -661,7 +664,7 @@ static void bfin_spi_pump_transfers(unsigned long data) dev_dbg(&drv_data->pdev->dev, "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", - drv_data->ops, chip->ops, &bfin_transfer_ops_u8); + drv_data->ops, chip->ops, &bfin_bfin_spi_transfer_ops_u8); message->state = RUNNING_STATE; dma_config = 0; @@ -868,10 +871,10 @@ static void bfin_spi_pump_transfers(unsigned long data) /* pop a msg from queue and kick off real transfer */ static void bfin_spi_pump_messages(struct work_struct *work) { - struct master_data *drv_data; + struct bfin_spi_master_data *drv_data; unsigned long flags; - drv_data = container_of(work, struct master_data, pump_messages); + drv_data = container_of(work, struct bfin_spi_master_data, pump_messages); /* Lock queue and check for queue work */ spin_lock_irqsave(&drv_data->lock, flags); @@ -925,7 +928,7 @@ static void bfin_spi_pump_messages(struct work_struct *work) */ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) { - struct master_data *drv_data = spi_master_get_devdata(spi->master); + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); unsigned long flags; spin_lock_irqsave(&drv_data->lock, flags); @@ -970,8 +973,8 @@ static u16 ssel[][MAX_SPI_SSEL] = { static int bfin_spi_setup(struct spi_device *spi) { struct bfin5xx_spi_chip *chip_info; - struct slave_data *chip = NULL; - struct master_data *drv_data = spi_master_get_devdata(spi->master); + struct bfin_spi_slave_data *chip = NULL; + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); u16 bfin_ctl_reg; int ret = -EINVAL; @@ -1152,8 +1155,8 @@ static int bfin_spi_setup(struct spi_device *spi) */ static void bfin_spi_cleanup(struct spi_device *spi) { - struct slave_data *chip = spi_get_ctldata(spi); - struct master_data *drv_data = spi_master_get_devdata(spi->master); + struct bfin_spi_slave_data *chip = spi_get_ctldata(spi); + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); if (!chip) return; @@ -1170,7 +1173,7 @@ static void bfin_spi_cleanup(struct spi_device *spi) spi_set_ctldata(spi, NULL); } -static inline int bfin_spi_init_queue(struct master_data *drv_data) +static inline int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) { INIT_LIST_HEAD(&drv_data->queue); spin_lock_init(&drv_data->lock); @@ -1192,7 +1195,7 @@ static inline int bfin_spi_init_queue(struct master_data *drv_data) return 0; } -static inline int bfin_spi_start_queue(struct master_data *drv_data) +static inline int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) { unsigned long flags; @@ -1214,7 +1217,7 @@ static inline int bfin_spi_start_queue(struct master_data *drv_data) return 0; } -static inline int bfin_spi_stop_queue(struct master_data *drv_data) +static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) { unsigned long flags; unsigned limit = 500; @@ -1243,7 +1246,7 @@ static inline int bfin_spi_stop_queue(struct master_data *drv_data) return status; } -static inline int bfin_spi_destroy_queue(struct master_data *drv_data) +static inline int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) { int status; @@ -1261,7 +1264,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct bfin5xx_spi_master *platform_info; struct spi_master *master; - struct master_data *drv_data; + struct bfin_spi_master_data *drv_data; struct resource *res; int status = 0; @@ -1371,7 +1374,7 @@ out_error_get_res: /* stop hardware and remove the driver */ static int __devexit bfin_spi_remove(struct platform_device *pdev) { - struct master_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; if (!drv_data) @@ -1410,7 +1413,7 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) { - struct master_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; status = bfin_spi_stop_queue(drv_data); @@ -1431,7 +1434,7 @@ static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) static int bfin_spi_resume(struct platform_device *pdev) { - struct master_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; write_CTRL(drv_data, drv_data->ctrl_reg); -- cgit v0.10.2 From e1993ed6420afd4421336d75e73641f75da87a7f Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 19 Oct 2010 18:03:27 +0800 Subject: spi/omap2_mcspi: disable channel after TX_ONLY transfer in PIO mode In the TX_ONLY transfer, the SPI controller also receives data simultaneously and saves them in the rx register. After the TX_ONLY transfer, the rx register will hold the random data received during the last tx transaction. If the direct following transfer is RX_ONLY, this random data has the possibility to affect this transfer like this: When the SPI controller is changed from TX_ONLY to RX_ONLY, the random data makes the rx register full immediately and triggers a dummy write automatically(in SPI RX_ONLY transfers, we need a dummy write to trigger the first transaction). So the first data received in the RX_ONLY transfer will be that random data instead of something meaningful. We can avoid this by inserting a Disable/Re-enable toggle of the channel after the TX_ONLY transfer, since it purges the rx register. Signed-off-by: Jason Wang Tested-by: Grazvydas Ignotas Acked-by: Tony Lindgren Signed-off-by: Grant Likely diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index d703927..27a3fa1 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -626,6 +626,12 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } else if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_EOT) < 0) dev_err(&spi->dev, "EOT timed out\n"); + + /* disable chan to purge rx datas received in TX_ONLY transfer, + * otherwise these rx datas will affect the direct following + * RX_ONLY transfer. + */ + omap2_mcspi_set_enable(spi, 0); } out: omap2_mcspi_set_enable(spi, 1); -- cgit v0.10.2 From 2764c500be0c1f057349ee6c81557239de060f87 Mon Sep 17 00:00:00 2001 From: Ilkka Koskinen Date: Tue, 19 Oct 2010 17:07:31 +0300 Subject: spi/omap2_mcspi: Verify TX reg is empty after TX only xfer with DMA In case of TX only with DMA, the driver assumes that the data has been transferred once DMA callback in invoked. However, SPI's shift register may still contain data. Thus, the driver is supposed to verify that the register is empty and the end of the SPI transfer has been reached. Signed-off-by: Ilkka Koskinen Tested-by: Tuomas Katila Acked-by: Tony Lindgren Signed-off-by: Grant Likely diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 27a3fa1..2a651e6 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -296,6 +296,19 @@ static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) return 0; } +static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(__raw_readl(reg) & bit)) { + if (time_after(jiffies, timeout)) + return -1; + cpu_relax(); + } + return 0; +} + static unsigned omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) { @@ -309,11 +322,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) u32 l; u8 * rx; const u8 * tx; + void __iomem *chstat_reg; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; l = mcspi_cached_chconf0(spi); + chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + count = xfer->len; c = count; word_len = cs->word_len; @@ -382,6 +398,16 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (tx != NULL) { wait_for_completion(&mcspi_dma->dma_tx_completion); dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE); + + /* for TX_ONLY mode, be sure all words have shifted out */ + if (rx == NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) + dev_err(&spi->dev, "TXS timed out\n"); + else if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_EOT) < 0) + dev_err(&spi->dev, "EOT timed out\n"); + } } if (rx != NULL) { @@ -435,19 +461,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) return count; } -static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) -{ - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(1000); - while (!(__raw_readl(reg) & bit)) { - if (time_after(jiffies, timeout)) - return -1; - cpu_relax(); - } - return 0; -} - static unsigned omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) { -- cgit v0.10.2