From 14a0abfc4ab0b49c7e48eca5c6b31288ea457dee Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 26 Jun 2015 12:42:53 +0530 Subject: ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D Signed-off-by: Vineet Gupta diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index e7cee0a..91cf405 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -115,6 +115,7 @@ if ISA_ARCOMPACT config ARC_CPU_750D bool "ARC750D" + select ARC_CANT_LLSC help Support for ARC750 core @@ -362,7 +363,7 @@ config ARC_CANT_LLSC config ARC_HAS_LLSC bool "Insn: LLOCK/SCOND (efficient atomic ops)" default y - depends on !ARC_CPU_750D && !ARC_CANT_LLSC + depends on !ARC_CANT_LLSC config ARC_HAS_SWAPE bool "Insn: SWAPE (endian-swap)" -- cgit v0.10.2 From b607eddd7122595bbcf49c00192faf3e49b142d3 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 29 Jun 2015 15:24:37 +0300 Subject: ARCv2: guard SLC DMA ops with spinlock SLC maintenance ops need to be serialized by software as there is no inherent buffering / quequing of aux commands. It can silently ignore a new aux operation if previous one is still ongoing (SLC_CTRL_BUSY) So gaurd the SLC op using a spin lock The spin lock doesn't seem to be contended even in heavy workloads such as iperf. On FPGA @ 75 MHz. [1] Before this change: ============================================================ # iperf -c 10.42.0.1 ------------------------------------------------------------ Client connecting to 10.42.0.1, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 10.42.0.110 port 38935 connected with 10.42.0.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 48.4 MBytes 40.6 Mbits/sec ============================================================ [2] After this change: ============================================================ # iperf -c 10.42.0.1 ------------------------------------------------------------ Client connecting to 10.42.0.1, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 10.42.0.243 port 60248 connected with 10.42.0.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 47.5 MBytes 39.8 Mbits/sec # iperf -c 10.42.0.1 ------------------------------------------------------------ Client connecting to 10.42.0.1, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 10.42.0.243 port 60249 connected with 10.42.0.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 54.9 MBytes 46.0 Mbits/sec ============================================================ Signed-off-by: Alexey Brodkin Cc: arc-linux-dev@synopsys.com Signed-off-by: Vineet Gupta diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index b29d62e..1cd6695 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -468,10 +468,18 @@ static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, noinline void slc_op(unsigned long paddr, unsigned long sz, const int op) { #ifdef CONFIG_ISA_ARCV2 + /* + * SLC is shared between all cores and concurrent aux operations from + * multiple cores need to be serialized using a spinlock + * A concurrent operation can be silently ignored and/or the old/new + * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop + * below) + */ + static DEFINE_SPINLOCK(lock); unsigned long flags; unsigned int ctrl; - local_irq_save(flags); + spin_lock_irqsave(&lock, flags); /* * The Region Flush operation is specified by CTRL.RGN_OP[11..9] @@ -504,7 +512,7 @@ noinline void slc_op(unsigned long paddr, unsigned long sz, const int op) while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY); - local_irq_restore(flags); + spin_unlock_irqrestore(&lock, flags); #endif } -- cgit v0.10.2 From 61754c18752ffb78145671e94f053fb202fff041 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Wed, 1 Jul 2015 17:19:30 +0200 Subject: kbuild: Allow arch Makefiles to override {cpp,ld,c}flags Since commit a1c48bb1 (Makefile: Fix unrecognized cross-compiler command line options), the arch Makefile is included earlier by the main Makefile, preventing the arc architecture to set its -O3 compiler option. Since there might be more use cases for an arch Makefile to fine-tune the options, add support for ARCH_CPPFLAGS, ARCH_AFLAGS and ARCH_CFLAGS variables that are appended to the respective kbuild variables. The user still has the final say via the KCPPFLAGS, KAFLAGS and KCFLAGS variables. Reported-by: Vineet Gupta Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Michal Marek diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index e63b446..13f888a 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -952,6 +952,14 @@ When kbuild executes, the following steps are followed (roughly): $(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic mode) if this option is supported by $(AR). + ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS Overrides the kbuild defaults + + These variables are appended to the KBUILD_CPPFLAGS, + KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the + top-level Makefile has set any other flags. This provides a + means for an architecture to override the defaults. + + --- 6.2 Add prerequisites to archheaders: The archheaders: rule is used to generate header files that diff --git a/Makefile b/Makefile index 13270c0..8c31fbc 100644 --- a/Makefile +++ b/Makefile @@ -780,10 +780,11 @@ endif include scripts/Makefile.kasan include scripts/Makefile.extrawarn -# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments -KBUILD_CPPFLAGS += $(KCPPFLAGS) -KBUILD_AFLAGS += $(KAFLAGS) -KBUILD_CFLAGS += $(KCFLAGS) +# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the +# last assignments +KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS) +KBUILD_AFLAGS += $(ARCH_AFLAGS) $(KAFLAGS) +KBUILD_CFLAGS += $(ARCH_CFLAGS) $(KCFLAGS) # Use --build-id when available. LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ -- cgit v0.10.2 From 97709069214eb75312c14946803b9da4d3814203 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 18 Jun 2015 13:54:01 +0530 Subject: ARC: Override toplevel default -O2 with -O3 ARC kernels have historically been built with -O3, despite top level Makefile defaulting to -O2. This was facilitated by implicitly ordering of arch makefile include AFTER top level assigned -O2. An upstream fix to top level a1c48bb160f ("Makefile: Fix unrecognized cross-compiler command line options") changed the ordering, making ARC -O3 defunct. Fix that by NOT relying on any ordering whatsoever and use the proper arch override facility now present in kbuild (ARCH_*FLAGS) Depends-on: ("kbuild: Allow arch Makefiles to override {cpp,ld,c}flags") Suggested-by: Michal Marek Cc: Geert Uytterhoeven Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Vineet Gupta diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 6107062..46d8731 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -49,7 +49,8 @@ endif ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE # Generic build system uses -O2, we want -O3 -cflags-y += -O3 +# Note: No need to add to cflags-y as that happens anyways +ARCH_CFLAGS += -O3 endif # small data is default for elf32 tool-chain. If not usable, disable it -- cgit v0.10.2 From f718c2efff0b0460e5335607a1c6caf620847680 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 3 Jul 2015 10:40:43 +0530 Subject: ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO alloc_pages_exact() get gfp flags and handle zero'ing already And while it, fix the case where ioremap fails: return rightaway. Signed-off-by: Vineet Gupta diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 74a637a..57706a9 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -60,8 +60,8 @@ void *dma_alloc_coherent(struct device *dev, size_t size, /* This is kernel Virtual address (0x7000_0000 based) */ kvaddr = ioremap_nocache((unsigned long)paddr, size); - if (kvaddr != NULL) - memset(kvaddr, 0, size); + if (kvaddr == NULL) + return NULL; /* This is bus address, platform dependent */ *dma_handle = (dma_addr_t)paddr; -- cgit v0.10.2 From bccea41ec02301a439a26e43fa49521ae8da4352 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 6 Jul 2015 10:25:01 +0530 Subject: ARC: fix unused var wanring Fixes: 9bf39ab2adaf ("vfs: add file_path() helper") Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c index 807f7d6..a6f91e8 100644 --- a/arch/arc/kernel/troubleshoot.c +++ b/arch/arc/kernel/troubleshoot.c @@ -58,7 +58,6 @@ static void show_callee_regs(struct callee_regs *cregs) static void print_task_path_n_nm(struct task_struct *tsk, char *buf) { - struct path path; char *path_nm = NULL; struct mm_struct *mm; struct file *exe_file; -- cgit v0.10.2 From 83ce3e6fcc16b4d36d40765618777b5a6a30d75b Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 30 Jun 2015 13:37:28 +0530 Subject: ARCv2: intc: IDU: support irq affinity With this nsim standlone / OSCI have working irq affinity - AXS103 still needs some work as IDU is not visible in intc hierarchy yet ! Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 30284e8..dfeea22 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -218,11 +218,28 @@ static void idu_irq_unmask(struct irq_data *data) raw_spin_unlock_irqrestore(&mcip_lock, flags); } +#ifdef CONFIG_SMP static int -idu_irq_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool f) +idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask, + bool force) { + unsigned long flags; + cpumask_t online; + + /* errout if no online cpu per @cpumask */ + if (!cpumask_and(&online, cpumask, cpu_online_mask)) + return -EINVAL; + + raw_spin_lock_irqsave(&mcip_lock, flags); + + idu_set_dest(data->hwirq, cpumask_bits(&online)[0]); + idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR); + + raw_spin_unlock_irqrestore(&mcip_lock, flags); + return IRQ_SET_MASK_OK; } +#endif static struct irq_chip idu_irq_chip = { .name = "MCIP IDU Intc", -- cgit v0.10.2 From 6b12ec177c410ef984d2b97717df77c9269eaeac Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 2 Jul 2015 14:02:54 +0530 Subject: ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index dfeea22..6fb0a2f 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -347,8 +347,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent) if (!i) idu_first_irq = irq; - irq_set_handler_data(irq, domain); - irq_set_chained_handler(irq, idu_cascade_isr); + irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain); } __mcip_cmd(CMD_IDU_ENABLE, 0); -- cgit v0.10.2 From e2fc61f384c9224b55990a644bbcf68c25e20203 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 29 Jun 2015 19:15:03 +0300 Subject: ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ With up-to-date FPGA builds ARC cores are supposed to correctly operate even with 90 MHz clock (which is a target frequency for AXS103 release). Signed-off-by: Alexey Brodkin Cc: arc-linux-dev@synopsys.com diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi index 15c8d62..1cd5e82 100644 --- a/arch/arc/boot/dts/axc003.dtsi +++ b/arch/arc/boot/dts/axc003.dtsi @@ -12,7 +12,7 @@ / { compatible = "snps,arc"; - clock-frequency = <75000000>; + clock-frequency = <90000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi index 199d428..2f0b332 100644 --- a/arch/arc/boot/dts/axc003_idu.dtsi +++ b/arch/arc/boot/dts/axc003_idu.dtsi @@ -12,7 +12,7 @@ / { compatible = "snps,arc"; - clock-frequency = <75000000>; + clock-frequency = <90000000>; #address-cells = <1>; #size-cells = <1>; -- cgit v0.10.2 From 80f420842ff42ad61f84584716d74ef635f13892 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 3 Jul 2015 11:26:22 +0530 Subject: ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus Cc: Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h index 99fe118..57c1f33 100644 --- a/arch/arc/include/asm/bitops.h +++ b/arch/arc/include/asm/bitops.h @@ -50,8 +50,7 @@ static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\ * done for const @nr, but no code is generated due to gcc \ * const prop. \ */ \ - if (__builtin_constant_p(nr)) \ - nr &= 0x1f; \ + nr &= 0x1f; \ \ __asm__ __volatile__( \ "1: llock %0, [%1] \n" \ @@ -82,8 +81,7 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long * \ m += nr >> 5; \ \ - if (__builtin_constant_p(nr)) \ - nr &= 0x1f; \ + nr &= 0x1f; \ \ /* \ * Explicit full memory barrier needed before/after as \ @@ -129,16 +127,13 @@ static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\ unsigned long temp, flags; \ m += nr >> 5; \ \ - if (__builtin_constant_p(nr)) \ - nr &= 0x1f; \ - \ /* \ * spin lock/unlock provide the needed smp_mb() before/after \ */ \ bitops_lock(flags); \ \ temp = *m; \ - *m = temp c_op (1UL << nr); \ + *m = temp c_op (1UL << (nr & 0x1f)); \ \ bitops_unlock(flags); \ } @@ -149,17 +144,14 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long * unsigned long old, flags; \ m += nr >> 5; \ \ - if (__builtin_constant_p(nr)) \ - nr &= 0x1f; \ - \ bitops_lock(flags); \ \ old = *m; \ - *m = old c_op (1 << nr); \ + *m = old c_op (1UL << (nr & 0x1f)); \ \ bitops_unlock(flags); \ \ - return (old & (1 << nr)) != 0; \ + return (old & (1UL << (nr & 0x1f))) != 0; \ } #endif /* CONFIG_ARC_HAS_LLSC */ @@ -174,11 +166,8 @@ static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m) \ unsigned long temp; \ m += nr >> 5; \ \ - if (__builtin_constant_p(nr)) \ - nr &= 0x1f; \ - \ temp = *m; \ - *m = temp c_op (1UL << nr); \ + *m = temp c_op (1UL << (nr & 0x1f)); \ } #define __TEST_N_BIT_OP(op, c_op, asm_op) \ @@ -187,13 +176,10 @@ static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long unsigned long old; \ m += nr >> 5; \ \ - if (__builtin_constant_p(nr)) \ - nr &= 0x1f; \ - \ old = *m; \ - *m = old c_op (1 << nr); \ + *m = old c_op (1UL << (nr & 0x1f)); \ \ - return (old & (1 << nr)) != 0; \ + return (old & (1UL << (nr & 0x1f))) != 0; \ } #define BIT_OPS(op, c_op, asm_op) \ @@ -224,10 +210,7 @@ test_bit(unsigned int nr, const volatile unsigned long *addr) addr += nr >> 5; - if (__builtin_constant_p(nr)) - nr &= 0x1f; - - mask = 1 << nr; + mask = 1UL << (nr & 0x1f); return ((mask & *addr) != 0); } -- cgit v0.10.2 From 70d93d89416562c32adc9444a15677bdf25a72ab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jo=C3=ABl=20Porquet?= Date: Tue, 7 Jul 2015 17:14:56 -0400 Subject: arc:irqchip: prepare for drivers/irqchip/irqchip.h removal The IRQCHIP_DECLARE macro migrated to 'include/linux/irqchip.h'. See commit 91e20b5040c67c51aad88cf87db4305c5bd7f79d ("irqchip: Move IRQCHIP_DECLARE macro to include/linux/irqchip.h"). This patch removes the inclusions of private header 'drivers/irqchip/irqchip.h' and if necessary replaces them with inclusions of 'include/linux/irqchip.h'. Signed-off-by: Joel Porquet Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 6208c63..26c1568 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -12,7 +12,6 @@ #include #include #include -#include "../../drivers/irqchip/irqchip.h" #include /* diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c index fcdddb6..039fac3 100644 --- a/arch/arc/kernel/intc-compact.c +++ b/arch/arc/kernel/intc-compact.c @@ -12,7 +12,6 @@ #include #include #include -#include "../../drivers/irqchip/irqchip.h" #include /* diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 6fb0a2f..2fb8658 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -175,7 +175,6 @@ void mcip_init_early_smp(void) #include #include #include -#include "../../drivers/irqchip/irqchip.h" /* * Set the DEST for @cmn_irq to @cpu_mask (1 bit per core) -- cgit v0.10.2 From 9138d4138d8e1f0acf734d2fb3455108bf43380f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 25 Jun 2015 13:46:57 +0530 Subject: ARC: Add llock/scond to futex backend Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h index 05b5aaf..70cfe16 100644 --- a/arch/arc/include/asm/futex.h +++ b/arch/arc/include/asm/futex.h @@ -16,12 +16,40 @@ #include #include +#ifdef CONFIG_ARC_HAS_LLSC + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\ + \ + __asm__ __volatile__( \ + "1: llock %1, [%2] \n" \ + insn "\n" \ + "2: scond %0, [%2] \n" \ + " bnz 1b \n" \ + " mov %0, 0 \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + " .align 4 \n" \ + "4: mov %0, %4 \n" \ + " b 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " .align 4 \n" \ + " .word 1b, 4b \n" \ + " .word 2b, 4b \n" \ + " .previous \n" \ + \ + : "=&r" (ret), "=&r" (oldval) \ + : "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \ + : "cc", "memory") + +#else /* !CONFIG_ARC_HAS_LLSC */ + #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\ \ __asm__ __volatile__( \ - "1: ld %1, [%2] \n" \ + "1: ld %1, [%2] \n" \ insn "\n" \ - "2: st %0, [%2] \n" \ + "2: st %0, [%2] \n" \ " mov %0, 0 \n" \ "3: \n" \ " .section .fixup,\"ax\" \n" \ @@ -39,6 +67,8 @@ : "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \ : "cc", "memory") +#endif + static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) { int op = (encoded_op >> 28) & 7; @@ -123,11 +153,17 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, pagefault_disable(); - /* TBD : can use llock/scond */ __asm__ __volatile__( - "1: ld %0, [%3] \n" - " brne %0, %1, 3f \n" - "2: st %2, [%3] \n" +#ifdef CONFIG_ARC_HAS_LLSC + "1: llock %0, [%3] \n" + " brne %0, %1, 3f \n" + "2: scond %2, [%3] \n" + " bnz 1b \n" +#else + "1: ld %0, [%3] \n" + " brne %0, %1, 3f \n" + "2: st %2, [%3] \n" +#endif "3: \n" " .section .fixup,\"ax\" \n" "4: mov %0, %4 \n" -- cgit v0.10.2 From b631788ab42ea4ba97dc30b3f47bad0edb0ddb4b Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 6 Jul 2015 15:25:21 +0530 Subject: ARC: slightly refactor macros for boot logging Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index a3d1862..08d98ee 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -150,9 +150,10 @@ static const struct cpuinfo_data arc_cpu_tbl[] = { { {0x00, NULL } } }; -#define IS_AVAIL1(v, str) ((v) ? str : "") -#define IS_USED(cfg) (IS_ENABLED(cfg) ? "" : "(not used) ") -#define IS_AVAIL2(v, str, cfg) IS_AVAIL1(v, str), IS_AVAIL1(v, IS_USED(cfg)) +#define IS_AVAIL1(v, s) ((v) ? s : "") +#define IS_USED_RUN(v) ((v) ? "" : "(not used) ") +#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg)) +#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg)) static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) { @@ -226,7 +227,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt); } n += scnprintf(buf + n, len - n, "%s", - IS_USED(CONFIG_ARC_HAS_HW_MPY)); + IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY)); } n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n", -- cgit v0.10.2 From f51e2f1911122879eefefa4c592dea8bf794b39c Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 13 Jul 2015 10:25:17 +0300 Subject: ARC: make sure instruction_pointer() returns unsigned value Currently instruction_pointer() returns pt_regs->ret and so return value is of type "long", which implicitly stands for "signed long". While that's perfectly fine when dealing with 32-bit values if return value of instruction_pointer() gets assigned to 64-bit variable sign extension may happen. And at least in one real use-case it happens already. In perf_prepare_sample() return value of perf_instruction_pointer() (which is an alias to instruction_pointer() in case of ARC) is assigned to (struct perf_sample_data)->ip (which type is "u64"). And what we see if instuction pointer points to user-space application that in case of ARC lays below 0x8000_0000 "ip" gets set properly with leading 32 zeros. But if instruction pointer points to kernel address space that starts from 0x8000_0000 then "ip" is set with 32 leadig "f"-s. I.e. id instruction_pointer() returns 0x8100_0000, "ip" will be assigned with 0xffff_ffff__8100_0000. Which is obviously wrong. In particular that issuse broke output of perf, because perf was unable to associate addresses like 0xffff_ffff__8100_0000 with anything from /proc/kallsyms. That's what we used to see: ----------->8---------- 6.27% ls [unknown] [k] 0xffffffff8046c5cc 2.96% ls libuClibc-0.9.34-git.so [.] memcpy 2.25% ls libuClibc-0.9.34-git.so [.] memset 1.66% ls [unknown] [k] 0xffffffff80666536 1.54% ls libuClibc-0.9.34-git.so [.] 0x000224d6 1.18% ls libuClibc-0.9.34-git.so [.] 0x00022472 ----------->8---------- With that change perf output looks much better now: ----------->8---------- 8.21% ls [kernel.kallsyms] [k] memset 3.52% ls libuClibc-0.9.34-git.so [.] memcpy 2.11% ls libuClibc-0.9.34-git.so [.] malloc 1.88% ls libuClibc-0.9.34-git.so [.] memset 1.64% ls [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.41% ls [kernel.kallsyms] [k] __d_lookup_rcu ----------->8---------- Signed-off-by: Alexey Brodkin Cc: arc-linux-dev@synopsys.com Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h index 9175597..91694ec 100644 --- a/arch/arc/include/asm/ptrace.h +++ b/arch/arc/include/asm/ptrace.h @@ -106,7 +106,7 @@ struct callee_regs { long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13; }; -#define instruction_pointer(regs) ((regs)->ret) +#define instruction_pointer(regs) (unsigned long)((regs)->ret) #define profile_pc(regs) instruction_pointer(regs) /* return 1 if user mode or 0 if kernel mode */ -- cgit v0.10.2 From 624b71ee20acba269e348eb6bdd516d47b9d30fa Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 12 Jul 2015 13:16:50 +0530 Subject: ARCv2: support HS38 releases Signed-off-by: Vineet Gupta diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 08d98ee..18cc015 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -142,11 +142,15 @@ static void read_arc_build_cfg_regs(void) } static const struct cpuinfo_data arc_cpu_tbl[] = { +#ifdef CONFIG_ISA_ARCOMPACT { {0x20, "ARC 600" }, 0x2F}, { {0x30, "ARC 700" }, 0x33}, { {0x34, "ARC 700 R4.10"}, 0x34}, { {0x35, "ARC 700 R4.11"}, 0x35}, - { {0x50, "ARC HS38" }, 0x51}, +#else + { {0x50, "ARC HS38 R2.0"}, 0x51}, + { {0x52, "ARC HS38 R2.1"}, 0x52}, +#endif { {0x00, NULL } } }; -- cgit v0.10.2