From 64edbcdd9c8d2aac36bead7f8cdafe0ec02bab40 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 28 Jun 2012 11:45:01 +0800 Subject: ARM: dts: imx28-evk: add vmmc-supply for mmc device Add vmmc-supply for mmc device, so that the power to mmc slot can be turned on by mmc driver if bootloader hasn't done it. Also remove "okay" status for mmc1/ssp1, as the device has pin conflict with gpmi-nand. Actually the device is already disabled since the mxs-mmc driver adopts pinctrl support because there is no pinctrl setup for the device in dts. Make this explicit by removing "okay" status. Signed-off-by: Shawn Guo diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 505ae5e..28b94d3 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -35,6 +35,7 @@ &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; @@ -42,7 +43,6 @@ compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; - status = "okay"; }; pinctrl@80018000 { @@ -141,6 +141,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; }; sound { -- cgit v0.10.2